In this screen you can see the content of your hard drive(s) along with the DrakX partitioning proposals for where to install Mageia. The actual options available from those shown below will vary according to the layout and content of your particular hard drive(s). Use Existing Partitions Jika pilihan ini tersedia, artinya partisi yang cocok untuk Linux telah ditemukan dan mungkin bisa digunakan untuk instalasi. Use Free Space Jika Anda memiliki ruang tak terpakai pada perangkat disk Anda, maka pilihan ini akan menggunakannya untuk menginstall Mageia. Use Free Space on a Windows Partition If you have unused space on an existing Windows partition, the installer may offer to use it. This can be a useful way of making room for your new Mageia installation, but is a risky operation so you should make sure you have backed up all important files! With this option, the installer displays the remaining Windows partition in light blue and the proposed Mageia partition in dark blue with their intended sizes just underneath. You have the option to modify these sizes by clicking and dragging the gap between both partitions. See the following screenshot: Erase and use Entire Disk This option will allocate the entire drive for Mageia This will erase ALL data on the selected hard drive. Take care! If you intend to use part of the disk for something else, or you already have data on the drive that you are not prepared to lose, then do not use this option. Perhatikan bahwa ini akan mengurangi ukuran dari partisi Windows. Partisi harus "bersih", maksudnya, Windows harus dimatikan dengan benar saat terakhir kali digunakan. Juga harus sudah didefrag, walaupun tidak ada jaminan bahwa semua file telah dipindahkan dari area yang akan digunakan. Sangat disarankan untuk membuat cadangan semua file pribadi. Custom Disk Partitioning Ini memberi Anda kendali penuh untuk menempatkan instalasi pada harddisk. If you are not using the Custom disk partitioning option, then the installer will allocate the available space according to the following rules: If the total available space is less than 50 GB, then only one partition is created. This will be the / (root) partition. If the total available space is greater than 50 GB, then three partitions are created 6/19 of the total available place is allocated to / with a maximum of 50 GB 1/19 is allocated to swap with a maximum of 4 GB the rest (at least 12/19) is allocated to /home This means that from 160 GB or greater available space, the installer will create three partitions: 50 GB for / 4 GB for swap and the remainder for /home If you are using a UEFI system, the ESP (EFI System Partition) will be automatically detected - or created if it does not exist yet - and mounted on /boot/EFI. The Custom disk partitioning option is the only one that allows to check it has been correctly done. If you are using a Legacy (also known as BIOS) system with a GPT partitioned disk, you need to create a BIOS boot partition if it doesn't already exist. It should be about 1 MiB with no mount point. It can be created with the Installer, under Custom disk partitioning, like any other partition. Be sure to select BIOS boot partition for filesystem type. See for information on how to proceed. Some newer drives are now using 4096 byte logical sectors, instead of the previous standard of 512. Due to lack of available hardware, the partitioning tool used in the installer has not been tested with such a drive. Some SSD devices now use an erase block size over 1 MB. If you have such a device we suggest that you partition the drive in advance, using an alternative partitioning tool like gparted, and to use the following settings: Align to = MiB Free space preceding (MiB) = 2 Also make sure all partitions are created using an even number of megabytes.