From 4f0a9652d7b0cf830ade03c025a2738beb360287 Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Fri, 15 Jul 2016 18:52:57 +0300 Subject: Update Slovenian translation --- docs/mcc-help/sl/drakgw.xml | 124 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 docs/mcc-help/sl/drakgw.xml (limited to 'docs/mcc-help/sl/drakgw.xml') diff --git a/docs/mcc-help/sl/drakgw.xml b/docs/mcc-help/sl/drakgw.xml new file mode 100644 index 00000000..8242010a --- /dev/null +++ b/docs/mcc-help/sl/drakgw.xml @@ -0,0 +1,124 @@ + +
+ + Nastavite skupno rabo internetne povezave skupaj z drugimi krajevnimi +računalniki + + drakgw + + + + + + + + + + +
+ Načela + + + + + + This is useful when you have a +computer (3) which has Internet (2) access and is connected also to a local +network (1). You can use computer (3) as a gateway to give that access to +other workstations (5) and (6) in the local network (1). For this, the +gateway must have two interfaces; the first one such as an ethernet card +must be connected to the local network, and the second one (4) connected to +the Internet (2). + + The first step is to verify that the network and the access to Internet are +set up, as documented in . +
+ +
+ Čarovnik za privzeti prehod + + The wizard + You can start this tool from the command line, by typing drakgw as root. + offers successive steps +which are shown below: + + + + If the wizard does not detect at least two interfaces, it warns about this +and asks to stop the network and configure the hardware. + + + + specify the interface used for the Internet connection. The wizard +automatically suggests one of the interfaces, but you should verify that +what is proposed is correct. + + + + specify which interface is used for the Lan access. The wizard also proposes +one, check that this is correct. + + + + The wizard proposes parameters for the Lan network, such as IP address, mask +and domain name. Check that these parameters are compatible with the actual +configuration. It is recommended that you accept these values. + + + + specify if the computer has to be used as a DNS server. If yes, the wizard +will check that bind is installed. Otherwise, you have to +specify the address of a DNS server. + + + + specify if the computer is to be used as a DHCP server. If yes, the wizard +will check that dhcp-server is installed and offer to configure +it, with start and end addresses in the DHCP range. + + + + specify if the computer is to be used as a proxy server. If yes, the wizard +will check that squid is installed and offer to configure it, +with the address of the administrator (admin@mydomain.com), name of the +proxy (myfirewall@mydomaincom), the port (3128) and the cache size (100 Mb). + + + + The last step allows you to check if the gateway machine is connected to +printers and to share them. + + + + You will be warned about the need to check the firewall if it is active. +
+ +
+ Configure the client + + If you have configured the gateway machine with DHCP, you only need to +specify in the network configuration tool that you get an address +automatically (using DHCP). The parameters will be obtained when connecting +to the network. This method is valid whatever operating system the client is +using. + + If you must manually specify the network parameters, you must in particular +specify the gateway by entering the IP-address of the machine acting as the +gateway. +
+ +
+ Stop connection sharing + + If you want to stop sharing the connection on the Mageia computer, launch +the tool. It will offer to reconfigure the connection or to stop the +sharing. +
+
-- cgit v1.2.1