From 8bcd7421863c7ed388a1911149ae0ccc9d0e94a8 Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Sat, 18 Feb 2017 08:34:49 +0200 Subject: Update Dutch translation --- docs/mcc-help/nl/drakwizard_dhcp.xml | 26 +++++++++-------- docs/mcc-help/nl/drakwizard_ntp.xml | 11 +++---- docs/mcc-help/nl/lspcidrake.xml | 10 +++---- docs/mcc-help/nl/scannerdrake.xml | 26 +++++++++-------- docs/mcc-help/nl/system-config-printer.xml | 47 ++++++++++++++++-------------- 5 files changed, 64 insertions(+), 56 deletions(-) (limited to 'docs/mcc-help/nl') diff --git a/docs/mcc-help/nl/drakwizard_dhcp.xml b/docs/mcc-help/nl/drakwizard_dhcp.xml index 8ef10770..535c8c68 100644 --- a/docs/mcc-help/nl/drakwizard_dhcp.xml +++ b/docs/mcc-help/nl/drakwizard_dhcp.xml @@ -16,20 +16,21 @@ naamgeving van de Net interfaces - This tool + Dit hulpprogramma U kunt deze tool op de commandoregel starten, door als root drakwizard dhcp te typen. - can help you to set up a -DHCP server. It is a component of drakwizard which should -be installed before you can access to it. + kan u helpen bij het +opzetten van een DHCP-server. Het is een onderdeel van +drakwizard en daarom moet dit geïnstalleerd zijn voordat u er toegang tot +het heeft.
Wat is DHCP? - The Dynamic Host Configuration Protocol (DHCP) is a -standardized networking protocol used on IP networks that dynamically -configures IP addresses and other information that is needed for Internet -communication. (From Wikipedia) + Het Dynamic Host Configuration Protocol (DHCP) is een +gestandaardiseerd netwerkprotocol dat gebruikt wordt op IP-netwerken die +IP-adressen en andere informatie die nodig is voor internetcommunicatie +dynamisch configureren. (Via Wikipedia)
@@ -74,10 +75,11 @@ which DHCP will assign IP addresses, and then click - Select the beginning and ending IP addresses of the range of IPs you want -the server to offer, along with the IP of the gateway machine connecting to -some place outside the local network, hopefully close to the Internet, then -click Next. + Selecteer de beginnende en aflopende IP-adressen van het bereik van +IP-adressen die u wilt dat de server aanbiedt, samen met het IP-adres van de +gateway machine dat aansluit op een plek buiten het lokale netwerk, dit is +hopelijk in de buurt van het internet, klik op +Volgende. diff --git a/docs/mcc-help/nl/drakwizard_ntp.xml b/docs/mcc-help/nl/drakwizard_ntp.xml index 5be59be0..d02a24d9 100644 --- a/docs/mcc-help/nl/drakwizard_ntp.xml +++ b/docs/mcc-help/nl/drakwizard_ntp.xml @@ -57,11 +57,12 @@ servers. - The following screens allows to choose the region and the city and then, you -arrive on a summary. If something is wrong, you can obviously change it -using the Previousbutton. If everything is right, -click on the Next button to proceed to the test. It -may take a while and you finally get this screen below: + De volgende schermen maken het mogelijk om een regio en stad te kiezen, +hierna wordt een samenvatting weergegeven. Als er iets mis is, kunt u +natuurlijk veranderingen aanbrengen door met behulp van de knop +Vorige terug te gaan. Als alles goed is, klikt u op +de knop Volgende om door te gaan. Het kan een tijdje +duren voordat u eindelijk het scherm hieronder te zien krijgt: diff --git a/docs/mcc-help/nl/lspcidrake.xml b/docs/mcc-help/nl/lspcidrake.xml index 414b60d3..74c46d36 100644 --- a/docs/mcc-help/nl/lspcidrake.xml +++ b/docs/mcc-help/nl/lspcidrake.xml @@ -12,9 +12,9 @@ role="bold">lspcidrake te typen. commandoregel gestart en gebruikt worden. Hij geeft wat meer informatie als hij als root gebruikt wordt. - lspcidrake gives the list of all the connected devices to the computer (USB, -PCI and PCMCIA) and the used drivers. It needs the ldetect and ldetect-lst -packages to work. + lspcidrake geeft een lijst van alle apparaten die aangesloten zijn op de +computer (USB, PCI en PCMCIA) en diens stuurprogramma's. De ldetect en +ldetect-lst pakketten zijn nodig om dit te laten werken. @@ -25,8 +25,8 @@ packages to work. Met de -v optie worden de identificaties van leveranciers en apparaten toegevoegd aan spcidrake. - lspcidrake often generates very long lists, so, to find an information, it -is often used in a pipeline with the grep command, like in these examples: + lspcidrake genereert vaak lange lijsten, dus om informatie te vinden wordt +het grep commando vaak in een pipeline gebruikt, zoals in deze voorbeelden: Informatie over de grafische kaart; diff --git a/docs/mcc-help/nl/scannerdrake.xml b/docs/mcc-help/nl/scannerdrake.xml index 8723052a..4bdd1828 100644 --- a/docs/mcc-help/nl/scannerdrake.xml +++ b/docs/mcc-help/nl/scannerdrake.xml @@ -121,10 +121,10 @@ similar to the one below. - Here you can choose whether the scanners connected to this machine should be -accessible by remote machines and by which remote machines. You can also -decide here whether scanners on remote machines should be made available on -this machine. + Hier kunt u bepalen of de scanners verbonden aan deze computer toegankelijk +dienen te zijn voor computers op afstand, en voor welke. U kunt hier ook +bepalen of scanners op externe computers beschikbaar moeten worden gemaakt +voor deze machine. Scanner sharing to hosts : name or IP address of hosts can be added or deleted from the list of hosts allowed to access the local device(s), on @@ -232,11 +232,13 @@ steps to correctly configure your scanner. -In some cases, you're told the scanner needs its firmware to be uploaded -each time it is started. This tool allows you to load it into the device, -after you installed it on your system. In this screen you can install the -firmware from a CD or a Windows installation, or install the one you -downloaded from an Internet site of the vendor. +In sommige gevallen wordt u verteld dat telkens als de scanner wordt gestart +de firmware moet worden geüpload. Dit hulpprogramma stelt u in staat om de +firmware in het apparaat te laden, nadat u het op uw systeem heeft +geïnstalleerd. In dit scherm kunt u de firmware via een cd-rom of een +Windows-installatie installeren, daarnaast kunt u ook de firmware +installeren die u heeft verkregen (gedownload) via de website van de +leverancier. Wanneer de firmware van het apparaat moet worden geladen, kan elk eerste gebruik van het apparaat een lange tijd duren, mogelijk meer dan een minuut. Dus wees geduldig. @@ -249,9 +251,9 @@ dient aangepast te worden. -Read those or other instructions you get carefully and if you don't know -what to do, feel free to ask for help in the forums. +Lees deze of andere instructies die u krijgt zorgvuldig en als u niet weet +wat u moet doen, dan kunt u altijd de gemeenschap om hulp vragen. diff --git a/docs/mcc-help/nl/system-config-printer.xml b/docs/mcc-help/nl/system-config-printer.xml index 3391a8f0..def51c34 100644 --- a/docs/mcc-help/nl/system-config-printer.xml +++ b/docs/mcc-help/nl/system-config-printer.xml @@ -51,11 +51,12 @@ role="bold">system-config-printer te typen. Het is noodzakelijk dit voorstel te accepteren, om verder te gaan. Tot 230MB aan afhankelijkheden zal worden geïnstalleerd. - To add a printer, choose the "Add" printer button. The system will try to -detect any printers and the ports available. The screenshot displays a -printer connected to a parallel port. If a printer is detected, such as a -printer on a USB port, it will be displayed on the first line. The window -will also attempt to configure a network printer. + Om een printer toe te voegen, kiest u de printer "Toevoegen" knop. Het +systeem zal proberen om alle printers en de beschikbare poorten te +detecteren. De schermafbeelding toont een printer die is aangesloten op een +parallelle poort. Als een printer wordt gedetecteerd, zoals een printer op +een USB-poort, wordt deze weergegeven op de eerste regel. Het venster zal +ook proberen om een netwerkprinter te configureren.
@@ -111,12 +112,13 @@ waarvan u weet dat het werkt.
Het installatieproces afronden - After the driver selection, a window requests some information which will -allow the system to designate and discover the printer. The first line is -the name under which the device will appear in applications in the list of -available printers. The installer then suggests printing a test page. After -this step, the printer is added and appears in the list of available -printers. + Nadat u een stuurprogramma heeft geselecteerd, zal een venster om wat +informatie vragen waarmee het systeem de printer kan aanwijzen en +ontdekken. De eerste regel is de naam waaronder het apparaat zal verschijnen +in toepassingen in de lijst met beschikbare printers. Het +installatieprogramma stelt vervolgens voor om een testpagina af te +drukken. Na deze stap wordt de printer toegevoegd en zal deze verschijnen in +de lijst met beschikbare printers.
@@ -127,19 +129,20 @@ bekabeld of draadloos netwerk, die aangesloten zijn op een printserver of die zijn aangesloten op een ander werkstation dat fungeert als printserver. - Often, it is better to configure the DHCP server to always associate a fixed -IP address with the printer's MAC-address. Of course that should be the same -as the IP address the printer of printserver is set to, if it has a fixed -one. + Vaak is het beter om de DHCP-server zo te configureren zodat een vast +IP-adres altijd gelijk geassociëerd wordt met de MAC-adres van een +printer. Natuurlijk moet dit wel hetzelfde ingesteld zijn als het IP-adres +van de printer of printserver, als het een vaste adres heeft. - The printer's Mac-address is a serial number given to the printer or -printserver or computer it is attached to, that can be obtained from a -configuration page printed by the printer or which may be written on a label -on the printer or printserver. If your shared printer is attached to a -Mageia system, you can run ifconfig on it -as root to find the MAC-address. It is the sequence of numbers and letters -after "HWaddr". + De Mac-adres van een printer is een serienummer die toegekend is aan de +printer, printserver of computer waaraan de printer bevestigd is. De +serienummer kan verkregen worden uit een configuratiepagina afgedrukt door +de printer of door het etiket (waarop het serienummer geschreven is) van de +printer of printserver te bekijken. Als uw gedeelde printer op een Mageia +systeem is aangesloten, kunt u ifconfig +uitvoeren als beheerder om het MAC-adres te vinden. Het adres is de volgorde +van de cijfers en letters achter "HWADDR". You can add your network printer by choosing the protocol it uses to talk to your computer over the network. If you don't know which protocol to choose, -- cgit v1.2.1