From 89f013bb4d68b0df17131df47f320ab4a44f060f Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Fri, 23 Feb 2018 20:34:43 +0200 Subject: Create stable folder and move stable docs there --- docs/mcc-help/cs/MCC-cover.xml | 62 --- docs/mcc-help/cs/MCC.xml | 46 -- docs/mcc-help/cs/MageiaUpdate.xml | 46 -- docs/mcc-help/cs/XFdrake.xml | 129 ----- docs/mcc-help/cs/diskdrake--dav.xml | 80 --- docs/mcc-help/cs/diskdrake--fileshare.xml | 58 --- docs/mcc-help/cs/diskdrake--nfs.xml | 88 ---- docs/mcc-help/cs/diskdrake--removable.xml | 52 -- docs/mcc-help/cs/diskdrake--smb.xml | 89 ---- docs/mcc-help/cs/drak3d.xml | 80 --- docs/mcc-help/cs/drakauth.xml | 29 -- docs/mcc-help/cs/drakautologin.xml | 39 -- docs/mcc-help/cs/drakboot.xml | 189 ------- docs/mcc-help/cs/drakbug.xml | 34 -- docs/mcc-help/cs/drakbug_report.xml | 71 --- docs/mcc-help/cs/drakclock.xml | 50 -- docs/mcc-help/cs/drakconnect--del.xml | 18 - docs/mcc-help/cs/drakconnect.xml | 808 ----------------------------- docs/mcc-help/cs/drakconsole.xml | 20 - docs/mcc-help/cs/drakdisk.xml | 82 --- docs/mcc-help/cs/drakedm.xml | 20 - docs/mcc-help/cs/drakfirewall.xml | 86 --- docs/mcc-help/cs/drakfont.xml | 66 --- docs/mcc-help/cs/drakguard.xml | 100 ---- docs/mcc-help/cs/drakgw.xml | 123 ----- docs/mcc-help/cs/drakhosts.xml | 34 -- docs/mcc-help/cs/drakinvictus.xml | 19 - docs/mcc-help/cs/draknetcenter.xml | 220 -------- docs/mcc-help/cs/draknetprofile.xml | 19 - docs/mcc-help/cs/draknfs.xml | 165 ------ docs/mcc-help/cs/drakproxy.xml | 37 -- docs/mcc-help/cs/drakrpm-edit-media.xml | 211 -------- docs/mcc-help/cs/draksambashare.xml | 251 --------- docs/mcc-help/cs/draksec.xml | 54 -- docs/mcc-help/cs/draksnapshot-config.xml | 49 -- docs/mcc-help/cs/draksound.xml | 35 -- docs/mcc-help/cs/drakups.xml | 20 - docs/mcc-help/cs/drakvpn.xml | 81 --- docs/mcc-help/cs/drakwizard_apache2.xml | 111 ---- docs/mcc-help/cs/drakwizard_bind.xml | 20 - docs/mcc-help/cs/drakwizard_dhcp.xml | 194 ------- docs/mcc-help/cs/drakwizard_ntp.xml | 117 ----- docs/mcc-help/cs/drakwizard_proftpd.xml | 102 ---- docs/mcc-help/cs/drakwizard_squid.xml | 238 --------- docs/mcc-help/cs/drakwizard_sshd.xml | 142 ----- docs/mcc-help/cs/drakxservices.xml | 19 - docs/mcc-help/cs/harddrake2.xml | 87 ---- docs/mcc-help/cs/keyboarddrake.xml | 44 -- docs/mcc-help/cs/localedrake.xml | 55 -- docs/mcc-help/cs/logdrake.xml | 111 ---- docs/mcc-help/cs/lsnetdrake.xml | 26 - docs/mcc-help/cs/lspcidrake.xml | 50 -- docs/mcc-help/cs/mcc-boot.xml | 41 -- docs/mcc-help/cs/mcc-hardware.xml | 102 ---- docs/mcc-help/cs/mcc-intro.xml | 22 - docs/mcc-help/cs/mcc-localdisks.xml | 31 -- docs/mcc-help/cs/mcc-network.xml | 82 --- docs/mcc-help/cs/mcc-networkservices.xml | 53 -- docs/mcc-help/cs/mcc-networksharing.xml | 44 -- docs/mcc-help/cs/mcc-security.xml | 50 -- docs/mcc-help/cs/mcc-sharing.xml | 34 -- docs/mcc-help/cs/mcc-system.xml | 76 --- docs/mcc-help/cs/mgaapplet-config.xml | 34 -- docs/mcc-help/cs/mousedrake.xml | 26 - docs/mcc-help/cs/msecgui.xml | 358 ------------- docs/mcc-help/cs/otherMageiaTools.xml | 42 -- docs/mcc-help/cs/rpmdrake.xml | 251 --------- docs/mcc-help/cs/scannerdrake.xml | 259 --------- docs/mcc-help/cs/software-management.xml | 39 -- docs/mcc-help/cs/system-config-printer.xml | 341 ------------ docs/mcc-help/cs/transfugdrake.xml | 138 ----- docs/mcc-help/cs/userdrake.xml | 154 ------ 72 files changed, 7153 deletions(-) delete mode 100644 docs/mcc-help/cs/MCC-cover.xml delete mode 100644 docs/mcc-help/cs/MCC.xml delete mode 100644 docs/mcc-help/cs/MageiaUpdate.xml delete mode 100644 docs/mcc-help/cs/XFdrake.xml delete mode 100644 docs/mcc-help/cs/diskdrake--dav.xml delete mode 100644 docs/mcc-help/cs/diskdrake--fileshare.xml delete mode 100644 docs/mcc-help/cs/diskdrake--nfs.xml delete mode 100644 docs/mcc-help/cs/diskdrake--removable.xml delete mode 100644 docs/mcc-help/cs/diskdrake--smb.xml delete mode 100644 docs/mcc-help/cs/drak3d.xml delete mode 100644 docs/mcc-help/cs/drakauth.xml delete mode 100644 docs/mcc-help/cs/drakautologin.xml delete mode 100644 docs/mcc-help/cs/drakboot.xml delete mode 100644 docs/mcc-help/cs/drakbug.xml delete mode 100644 docs/mcc-help/cs/drakbug_report.xml delete mode 100644 docs/mcc-help/cs/drakclock.xml delete mode 100644 docs/mcc-help/cs/drakconnect--del.xml delete mode 100644 docs/mcc-help/cs/drakconnect.xml delete mode 100644 docs/mcc-help/cs/drakconsole.xml delete mode 100644 docs/mcc-help/cs/drakdisk.xml delete mode 100644 docs/mcc-help/cs/drakedm.xml delete mode 100644 docs/mcc-help/cs/drakfirewall.xml delete mode 100644 docs/mcc-help/cs/drakfont.xml delete mode 100644 docs/mcc-help/cs/drakguard.xml delete mode 100644 docs/mcc-help/cs/drakgw.xml delete mode 100644 docs/mcc-help/cs/drakhosts.xml delete mode 100644 docs/mcc-help/cs/drakinvictus.xml delete mode 100644 docs/mcc-help/cs/draknetcenter.xml delete mode 100644 docs/mcc-help/cs/draknetprofile.xml delete mode 100644 docs/mcc-help/cs/draknfs.xml delete mode 100644 docs/mcc-help/cs/drakproxy.xml delete mode 100644 docs/mcc-help/cs/drakrpm-edit-media.xml delete mode 100644 docs/mcc-help/cs/draksambashare.xml delete mode 100644 docs/mcc-help/cs/draksec.xml delete mode 100644 docs/mcc-help/cs/draksnapshot-config.xml delete mode 100644 docs/mcc-help/cs/draksound.xml delete mode 100644 docs/mcc-help/cs/drakups.xml delete mode 100644 docs/mcc-help/cs/drakvpn.xml delete mode 100644 docs/mcc-help/cs/drakwizard_apache2.xml delete mode 100644 docs/mcc-help/cs/drakwizard_bind.xml delete mode 100644 docs/mcc-help/cs/drakwizard_dhcp.xml delete mode 100644 docs/mcc-help/cs/drakwizard_ntp.xml delete mode 100644 docs/mcc-help/cs/drakwizard_proftpd.xml delete mode 100644 docs/mcc-help/cs/drakwizard_squid.xml delete mode 100644 docs/mcc-help/cs/drakwizard_sshd.xml delete mode 100644 docs/mcc-help/cs/drakxservices.xml delete mode 100644 docs/mcc-help/cs/harddrake2.xml delete mode 100644 docs/mcc-help/cs/keyboarddrake.xml delete mode 100644 docs/mcc-help/cs/localedrake.xml delete mode 100644 docs/mcc-help/cs/logdrake.xml delete mode 100644 docs/mcc-help/cs/lsnetdrake.xml delete mode 100644 docs/mcc-help/cs/lspcidrake.xml delete mode 100644 docs/mcc-help/cs/mcc-boot.xml delete mode 100644 docs/mcc-help/cs/mcc-hardware.xml delete mode 100644 docs/mcc-help/cs/mcc-intro.xml delete mode 100644 docs/mcc-help/cs/mcc-localdisks.xml delete mode 100644 docs/mcc-help/cs/mcc-network.xml delete mode 100644 docs/mcc-help/cs/mcc-networkservices.xml delete mode 100644 docs/mcc-help/cs/mcc-networksharing.xml delete mode 100644 docs/mcc-help/cs/mcc-security.xml delete mode 100644 docs/mcc-help/cs/mcc-sharing.xml delete mode 100644 docs/mcc-help/cs/mcc-system.xml delete mode 100644 docs/mcc-help/cs/mgaapplet-config.xml delete mode 100644 docs/mcc-help/cs/mousedrake.xml delete mode 100644 docs/mcc-help/cs/msecgui.xml delete mode 100644 docs/mcc-help/cs/otherMageiaTools.xml delete mode 100644 docs/mcc-help/cs/rpmdrake.xml delete mode 100644 docs/mcc-help/cs/scannerdrake.xml delete mode 100644 docs/mcc-help/cs/software-management.xml delete mode 100644 docs/mcc-help/cs/system-config-printer.xml delete mode 100644 docs/mcc-help/cs/transfugdrake.xml delete mode 100644 docs/mcc-help/cs/userdrake.xml (limited to 'docs/mcc-help/cs') diff --git a/docs/mcc-help/cs/MCC-cover.xml b/docs/mcc-help/cs/MCC-cover.xml deleted file mode 100644 index 715940f6..00000000 --- a/docs/mcc-help/cs/MCC-cover.xml +++ /dev/null @@ -1,62 +0,0 @@ - - - - - - Ovládací centrum Mageia - - The tools to configure the Mageia system - - - - - - - Texty a snímky obrazovky v této příručce jsou dostupné pod licencí CC BY-SA -3.0 http://creativecommons.org/licenses/by-sa/3.0/. - - Tato příručka byla vytvořena s pomocí Calenco CMS vyvinutého NeoDocem. - - Byl napsán dobrovolníky v jejich volném čase. Spojte se, prosím, s Dokumentačním -týmem, pokud byste chtěli pomoci tuto příručku vylepšit. - - -
- - - - - - - - - - - - - - - - - - - - - - - - - -
- diff --git a/docs/mcc-help/cs/MCC.xml b/docs/mcc-help/cs/MCC.xml deleted file mode 100644 index baf3d6d6..00000000 --- a/docs/mcc-help/cs/MCC.xml +++ /dev/null @@ -1,46 +0,0 @@ - -
- - - Ovládací centrum Mageia - - Texty a snímky obrazovky v této příručce jsou dostupné pod licencí CC BY-SA -3.0 http://creativecommons.org/licenses/by-sa/3.0/. - - Tato příručka byla vytvořena s pomocí Calenco CMS vyvinutého NeoDocem. - - Byl napsán dobrovolníky v jejich volném čase. Spojte se, prosím, s Dokumentačním -týmem, pokud byste chtěli pomoci tuto příručku vylepšit. - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/MageiaUpdate.xml b/docs/mcc-help/cs/MageiaUpdate.xml deleted file mode 100644 index 7bcd2998..00000000 --- a/docs/mcc-help/cs/MageiaUpdate.xml +++ /dev/null @@ -1,46 +0,0 @@ -
- - Aktualizace balíčků softwaru - - MageiaUpdate or drakrpm-update - - - - - - - - - This tool - You can start this tool from the command line, by typing MageiaUpdate or drakrpm-update as root. - is present in the Mageia -Control Center under the tab Software -management. - - - To work, MageiaUpdate needs the repositories to be configured with -drakrpm-editmedia with some media checked as updates. If they are not, you -are prompted to do so. - - - As soon as this tool is launched, it scans the installed packages and lists -those with an update available in the repositories. They are all selected by -default to be automatically downloaded and installed. Click on the -Update button to start the process. - - By clicking on a package, more information is displayed in the lower half of -the window. The print > before a title -means you can click to drop down a text. - - - Pokud jsou k dispozici aktualizace, applet v systémové liště vás upozorní -zobrazením této červené ikony - - - - -. Pro aktualizaci systému stačí kliknout a zadat heslo uživatele. - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/XFdrake.xml b/docs/mcc-help/cs/XFdrake.xml deleted file mode 100644 index b27b0534..00000000 --- a/docs/mcc-help/cs/XFdrake.xml +++ /dev/null @@ -1,129 +0,0 @@ -
- - Nastavit grafický server - - XFdrake - - - - - - - - - This tool is present in the Mageia Control Center under the tab Hardware. Select Set up the -graphical server. - You can start this tool from the command line, by typing -XFdrake as normal user or drakx11 -as root. Mind the capital letters. - - - - - The buttons allow you to change the graphical configuration. - - Grafická karta: - - The graphic card currently detected is displayed and the matching server -configured. Click on this button to change to another server, for example -one with a proprietary driver. - - The available servers are sorted under Vendor by -manufacturer in alphabetical order and then by model also in alphabetical -order. The free drivers are sorted by alphabetical order under -Xorg. - - - In case of problems, Xorg - Vesa will work with most -graphic cards and give you time to find and install the right driver while -in your Desktop Environment. - - If even Vesa doesn't work, choose Xorg - -fbdev, which is used while installing -Mageia, but doesn't allow you to change resolution or refresh rates. - If you made your choice for a free driver, you may be asked if you want to -use a proprietary driver instead with more features (3D effects for -example). - - - - Monitor: - - In the same way as above, the monitor currently detected is displayed and -you can click on the button to change to another one. If the desired monitor -isn't in the Vendor list, choose in the -Generic list a monitor with the same features. - - - - Resolution: - - This button allows the choice of the resolution (number of pixels) and the -colour depth (number of colours). It displays this screen: - - - - - - When you change the color depth, a -multi-colored bar will appear next to the second button and show a preview -of what the selected color depth looks like. - - The first button shows the currently resolution, click to change for another -one. The list gives all the possible choices according to the graphic card -and the monitor, it is possible to click on Other to -set other resolutions, but bear in mind that you can damage your monitor or -select an uncomfortable setting. - - The second button shows the currently colour depth, click to change this for -another one. - - - Depending on the chosen resolution, it may be necessary to logout and -restart the graphical environment for the settings to take effect. - - - - - Test: - - Once the configuration done, it is recommended to do a test before clicking -on OK because it is easier to modify the settings now than later if the -graphical environment doesn't work. - - - In case of a non working graphical environment, type Alt+Ctrl+F2 to open a -text environment, connect as root and type XFdrake (with the caps) to to use -XFdrake's text version. - If the test fails, just wait until the end, if it works but you don't want -to change after all, click on No, if everything is -right, click on OK. - - - Volby: - - - Global options: If Disable -Ctrl-Alt-Backspace is checked, it will no longer be possible to -restart X server using Ctrl+Alt+Backspace keys. - - - - Graphic card options: Allows you to enable or disable -three specific features depending on the graphic card. - - - - Graphical interface at startup: Most of the time, -Automatically start the graphical interface (Xorg) upon -booting is checked to make the boot switch to graphical mode, it -may be unchecked for a server. - - - - After a click on the Quit button, the system will ask -you to confirm. There is still time to cancel everything and keep the -previous configuration, or to accept. In this case, you have to disconnect -and reconnect to activate the new configuration. -
\ No newline at end of file diff --git a/docs/mcc-help/cs/diskdrake--dav.xml b/docs/mcc-help/cs/diskdrake--dav.xml deleted file mode 100644 index 9f68a76a..00000000 --- a/docs/mcc-help/cs/diskdrake--dav.xml +++ /dev/null @@ -1,80 +0,0 @@ - -
- - Přístup k diskům a adresářům sdíleným pomocí WebDAV - - diskdrake --dav - - - - - - - - - Tento nástrojTento nástroj můžete spustit z příkazové řádky zadáním diskdrake --dav jako root. - se nachází v ovládacím -středisku Mageia v kartě pro Sdílení v síti označené Nastavit -sdílení pomocí WebDAV. - -
- Úvod - - WebDAV je -protokol, který umožňuje připojit adresář webového serveru tak, že vypadá -jako lokální adresář. Je nezbytné, aby na vzdáleném stroji byl spuštěn -WebDAV server. Účelem tohoto nástroje není konfigurace serveru WebDAV. -
- -
- Vytvoření nového záznamu - - The first screen of the tool displays the already configured entries, if -any, and a New button. Use it to create a new -entry. Insert the server URL in the field of the new screen. - - Then you get a screen with radio buttons to select some actions. Continue -with the action Mount point by clicking -OK after selecting the radio button, as the -Server is already configured. You can however correct -it, if needed. - - - - - - - - The content of the remote directory will be accessible through this mount -point. - - In the next step, give your user name and password. If you need some other -options, you can give them in the advanced screen. - - - - - - - - The option Mount allows you to mount immediately the -access. - - After you accepted the configuration with the radio button -Done, the first screen is displayed again and your -new mount point is listed. After you choose Quit, you -are asked whether or not to save the modifications in -/etc/fstab. Choose this option if you want that the -remote directory is available at each boot. If your configuration is for -one-time usage, do not save it. -
-
diff --git a/docs/mcc-help/cs/diskdrake--fileshare.xml b/docs/mcc-help/cs/diskdrake--fileshare.xml deleted file mode 100644 index 7e82bf74..00000000 --- a/docs/mcc-help/cs/diskdrake--fileshare.xml +++ /dev/null @@ -1,58 +0,0 @@ -
- - Sdílet diskové oddíly tohoto počítače - - diskdrake --fileshare - - - - - - - - - This simple toolYou can start this tool from the command line, by typing diskdrake --fileshare as root. allows you, the -administrator, to allow users to share parts of their own /home -subdirectories with other users of a same local network which may have -computers running either Linux or Windows operating system. - - It is found in the Mageia Control Center, under the Local Disk tab, labelled -"Share your hard disk partitions". - - First, answer the question : "Would you like to allow users to -share some of their directories ?", click on No -sharing if the answer is no for all users, click on -Allow all users for all users and click on -Custom if the answer is no for some users and yes for -the others. In this last case, the users that are authorised to share their -directories must belong to the fileshare group, which is automatically -created by the system. You will be asked about this later. - - Click on OK, a second screen appears which asks you -choose between NFS or SMB. -Check NFS if Linux is the only operating system on -the network, check SMB if the network includes both -Linux and Windows machines and then click on OK. Any -required packages will be installed if necessary. - - The configuration is now complete unless the Custom option was chosen. In -this case, an extra screen prompts you to open Userdrake. This tool allows -you to add users authorised to share their directories to the fileshare -group. In the User tab, click on the user to add to the fileshare group, -then on Edit, In the Groups tab. Check the -fileshare group and click on OK. For more information -about Userdrake, see this page - - - - - When adding a new user to the fileshare group, you have to disconnect and -reconnect the network for the modifications to be taken into account. - - - From now on each user belonging to the fileshare group can select in his/her -file manager the directories to be shared, although not all file managers -have this facility. - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/diskdrake--nfs.xml b/docs/mcc-help/cs/diskdrake--nfs.xml deleted file mode 100644 index a8896c81..00000000 --- a/docs/mcc-help/cs/diskdrake--nfs.xml +++ /dev/null @@ -1,88 +0,0 @@ -
- - Nastavit přístup k diskům a adresářům sdíleným pomocí NFS - - diskdrake --nfs - - - - - - - - - - - . - - - -
- Úvod - - This tool - You can start this tool from the command line, by typing diskdrake --nfs as root. - allows you to declare some -shared directories to be accessible to all users on the machine. The -protocol used for this is NFS which is available on most Linux or Unix -systems. The shared directory will be thus available directly at -boot. Shared directories can be also accessible directly in a single session -for a user with tools such as file browsers. -
- -
- Postup - - Select search servers to obtain a list of servers -which share directories. - - Click on the > symbol before the server name to display the list of the -shared directories and select the directory you want to access. - - - - - - - - The button Mount point will be available and you have -to specify where to mount the directory. - - - - - - - - After choosing the mount point, You can mount it. You can also verify and -change some options with the Options button. After -mounting the directory, you can unmount it with the same button. - - - - - - - - - - - - - - On accepting the configuration with the Done button, -a message will displayed, asking "Do you want to save the /etc/fstab -modifications". This will make the directory available at each boot, if the -network is accessible. The new directory is then available in your file -browser, for example in Dolphin. - - - - - - - - -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/diskdrake--removable.xml b/docs/mcc-help/cs/diskdrake--removable.xml deleted file mode 100644 index 18e6c1a5..00000000 --- a/docs/mcc-help/cs/diskdrake--removable.xml +++ /dev/null @@ -1,52 +0,0 @@ -
- - CD/DVD vypalovačka - - diskdrake --removable - - - - - - - - - This tool - Tento nástroj můžete jako root spustit z příkazového řádku zadáním diskdrake --removable. - is found under the tab Local -disks in the Mageia Control Center labelled accordingly with your removable -hardware (CD/DVD players and burners and floppy drives only). - - Its goal is to define the way your removable disk is mounted. - - At the top of the window there is a short description of your hardware and -the chosen options to mount it. Use the menu on the bottom to change -them. Check the item to be changed and then on the OK -button. - -
- Přípojný bod - - Pro změnu přípojného bodu zaškrtněte toto pole. Výchozí je /media/cdrom. - - -
- -
- Volby - - Many mount options can be chosen here either directly in the list or via the -Advanced submenu. The main are: - - - -
- user/nouser - - user allows an ordinary user (not root) to mount the removable disk, this -option involves noexec, nosuid and nodev. The user who mounted the disk is -the only one who can umount it. -
-
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/diskdrake--smb.xml b/docs/mcc-help/cs/diskdrake--smb.xml deleted file mode 100644 index 587e1672..00000000 --- a/docs/mcc-help/cs/diskdrake--smb.xml +++ /dev/null @@ -1,89 +0,0 @@ - -
- - - Přístup k diskům a adresářům na systémech Windows (pomocí Samba) - - diskdrake --smb - - - - - -
- Úvod - - This tool - You can start this tool from the command line, by typing diskdrake --smb as root. - allows you to declare which -shared directories to be accessible to all users on the machine. The -protocol used for this is SMB which has been popularized on Windows(R) -systems. The shared directory will be available directly at boot. Shared -directories can be also accessed directly in a single session by a user with -tools such as file browsers. - - Before starting the tool, it is a good idea to declare the names of -available servers, for example with -
- -
- Postup - - Select search servers to obtain a list of servers who -share directories. - - Click on the server name and on > before the server name to display the -list of the shared directories and select the directory you want to access. - - The Mount point button will become available, you -have to specify where to mount the directory. - - - - - - - - After choosing the mount point, it can be mounted with the Mount -button. You can also verify and change some options with the -Options button. - - In options, you can specify the user name and the password of those able to -connect to the SMB server. After mounting the directory, you can unmount it -with the same button. - - - - - - - - - - - - - - After accepting the configuration with the Done button, a message will ask -"Do you want to save the /etc/fstab modifications". Saving, will allow -directory to made available at each boot, if the network is accessible. The -new directory is then available in your file browser, for example in -dolphin. - - - - - - - - - -
-
diff --git a/docs/mcc-help/cs/drak3d.xml b/docs/mcc-help/cs/drak3d.xml deleted file mode 100644 index bff9e41d..00000000 --- a/docs/mcc-help/cs/drak3d.xml +++ /dev/null @@ -1,80 +0,0 @@ -
- - 3D efekty grafického prostředí - - drak3d - - - - - - - - -
- Úvod - - This tool - You can start this tool from the command line, by typing drak3d as root. - lets you manage the 3D -desktop effects on your operating system. 3D effects are turned off by -default. -
- -
- Začínáme - - To use this tool, you need to have the glxinfo package installed. If the -package is not installed, you will be prompted to do so before drak3d can -start. - - After starting drak3d, you will be presented with a menu window. Here you -can choose either No 3D Desktop Effects or -Compiz Fusion. Compiz Fusion is part of a -composite/window manager, which includes hardware-accelerated special -effects for your desktop. Choose Compiz Fusion to turn -it on. - - If this is your first time using this program after a clean installation of -Mageia, you will get a warning message telling you which packages need to be -installed in order to use Compiz Fusion. Click on the -Ok button to continue. - - - - - - - - Once the appropriate packages are installed, you will notice that Compiz -Fusion is selected in the drak3d menu, but you must log out and log back in -for the changes to take effect. - - After logging back in, Compiz Fusion will be activated. To configure Compiz -Fusion, see the page for the ccsm (CompizConfig Settings Manager) tool. -
- -
- Řešení problémů - -
- Can't See Desktop after Logging in - - If after turning on Compiz Fusion you attempt to log back into your desktop -but can't see anything, restart your computer to get back to the log in -screen. Once there, click on the Desktop icon and select drak3d. - - - - - - - - When you log in, if your account is listed as an administrator, you will be -prompted for your password again. Otherwise, use the administrator login -with his/her account. Then you can undo any changes that may have caused the -log in problem. -
-
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakauth.xml b/docs/mcc-help/cs/drakauth.xml deleted file mode 100644 index 18d14829..00000000 --- a/docs/mcc-help/cs/drakauth.xml +++ /dev/null @@ -1,29 +0,0 @@ - -
- - Ověření - - drakauth - - - - - - - - - This toolYou can start this tool from the command line, by typing drakauth as root. enables you to modify the -manner in which you can be recognized as user of the machine or on the net. - - By default, information for your authentication is stored in a file on your -computer. Modify it only if your network administrator invites you to do so -and give information about that. - -
diff --git a/docs/mcc-help/cs/drakautologin.xml b/docs/mcc-help/cs/drakautologin.xml deleted file mode 100644 index 3b5190a3..00000000 --- a/docs/mcc-help/cs/drakautologin.xml +++ /dev/null @@ -1,39 +0,0 @@ -
- - Nastavit automatické přihlášení do systému - - drakautologin - - - - - - - - - This tool - You can start this tool from the command line, by typing drakautologin as root. - allows you to automatically -login the same user, in her/his desktop environment, without asking for any -password. It's called autologin. This is generally a good idea when there -is only one user like to be using the machine. - - It is found under the Boot tab in the -Mageia Control Center labelled "Set up autologin to automatically log in". - - The interface buttons are pretty obvious: - - Check Launch the graphical environment when your system -starts, if you want X Window System to be executed after the -boot. If not, the system will start in text mode. Nevertheless, it will be -possible to launch the graphic interface manually. This can be done by -launching the command 'startx' or 'systemctl start dm'. - - If the first box is checked, two other options are available, check either -No, I don't want autologin, if you want the system to -continue to ask for which user to connect (and password) or check -Yes, I want autologin with this (user, desktop), if -needed. In this case, you also need to supply the Default -username and the Default desktop. -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakboot.xml b/docs/mcc-help/cs/drakboot.xml deleted file mode 100644 index f6603730..00000000 --- a/docs/mcc-help/cs/drakboot.xml +++ /dev/null @@ -1,189 +0,0 @@ -
- - Nastavit způsob zavedení systému - - drakboot - - - - - - - - - If you are using a UEFI system instead of BIOS, the user interface is -slightly different as the boot device is obviously the EFI system Partition -(ESP). - - - - - - - - This tool - You can start this tool from the command line, by typing drakboot as root. - allows you to configure the -boot options (choice of the bootloader, set a password, the default boot, -etc.) - - It is found under the Boot tab in the Mageia Control Center labeled "Set up -boot system". - - - Don't use this tool if you don't know exactly what you are doing. Changing -some settings may prevent your machine from booting again ! - - - In the first part, called Bootloader, it is possible if -using BIOS, to choose which Bootloader to use, Grub, -Grub2 or Lilo, and with a graphical or a text menu. It is just a question -of taste, there are no other consequences. You can also set the -Boot device, don't change anything here unless you -are an expert. The boot device is where the bootloader is installed and any -modification can prevent your machine from booting. - - In a UEFI system, the bootloader is Grub2-efi and is -installed in /boot/EFI partition. This FAT32 formatted partition is common -to all operating systems installed. - - In the second part, called Main options, you can set -the Delay before booting default image, in -seconds. During this delay, Grub or Lilo will display the list of available -operating systems, prompting you to make your choice. If no selection is -made, the bootloader will boot the default one once the delay elapses. - - In the third and last part, called Security, it is -possible to set a password for the bootloader. This means a username and -password will be asked at the boot time to select a booting entry or change -settings. The username is "root" and the password is the one chosen here. - - The Advanced button gives some extra options. - - Povolit ACPI: - - ACPI (Advanced Configuration and Power Interface) is a standard for the -power management. It can save energy by stopping unused devices, this was -the method used before APM. Check this box if your hardware is ACPI -compatible. - - Povolit SMP: - - SMP stands for Symmetric Multi Processors, it's an architecture for -multicore processors. - - - If you have a processor with HyperThreading, Mageia will see it as a dual -processor and enable SMP. - - - Enable APIC and Enable Local -APIC: - - APIC stands for Advanced Programmable Interrupt Controller. There are two -components in the Intel APIC system, the local APIC (LAPIC) and the I/O -APIC. The latter one routes the interrupts it receives from peripheral buses -to one or more local APICs that are in the processor. It is really useful -for multi-processor systems. Some computers have problems with the APIC -system which can cause freezes or incorrect device detection (error message -"spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local -APIC. - - - - - - - - The Next screen differs depending on which boot -loader you chose. - - - - You have Grub Legacy or Lilo: - - In this case, you can see the list of all the available entries at boot -time. The default one is asterisked. To change the order of the menu -entries, click on the up or down arrows to move the selected item. If you -click on the Add or Modify -buttons, a new window appears to add a new entry in the bootloader menu or -to modify an existing one. You need to be familiar with Lilo or Grub to be -able to use these tools. - - - - - - - - The Label field is freeform, write here what you want -to be displayed in the menu. It matches the Grub command "title". For -example: Mageia3. - - The Image field contains the kernel name. It matches -the Grub command "kernel". For example /boot/vmlinuz. - - The Root field contains the device name where the -kernel is stored. It matches the Grub command "root". For example (hd0,1). - - The Append field contains the options to be given to -the kernel at boot time. - - If the box Default is checked, Grub will boot this -entry by default. - - In the extra screen called Advanced, it is possible to -choose the Video mode, an initrd -file and a network profile, see , in the drop-down lists. - - - - You have Grub2 or Grub2-efi (boot loaders used by default respectively in -Legacy mode and UEFI mode): - - In this case, the drop-down list labelled Default -displays all the available entries; click on the one wanted as the default -one. - - - - - - - - The Append field contains the options to be given to -the kernel at boot time. - - If you have other operating systems installed, Mageia attempts to add them -to your Mageia boot menu. If you don't want this behaviour, uncheck the box -Probe Foreign OS - - In the extra screen called Advanced, it is possible to -choose the Video mode. If you don't want a bootable -Mageia, but to chain load it from another OS, check the box Do not -touch ESP or MBR and accept the warning. - - - - - - - - - Not installing on ESP or MBR means that the installation is not bootable -unless chain loaded from another OS. - - - To set many other parameters, you can use the tool named Grub -Customizer, available in the Mageia repositories (see below). - - - - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakbug.xml b/docs/mcc-help/cs/drakbug.xml deleted file mode 100644 index 38cf2149..00000000 --- a/docs/mcc-help/cs/drakbug.xml +++ /dev/null @@ -1,34 +0,0 @@ -
- - Mageia Bug Report Tooldrakbug - - - - - - - - - Usually, this toolYou can start this tool from the command line, by typing drakbug. starts automatically -when a Mageia tool crashes. However, it is also possible that, after filing -a bug report, you are asked to start this tool to check some of the -information it gives, and then provide that in that existing bug report. - - If a new bug report needs to be filed and you are not used to doing that, -then please read How to -report a bug report properly before clicking on the "Report" button. - - In case the bug has already been filed by someone else (the error message -that drakbug gave will be the same, then), it is useful to add a comment to -that existing report that you saw the bug, too. - -
diff --git a/docs/mcc-help/cs/drakbug_report.xml b/docs/mcc-help/cs/drakbug_report.xml deleted file mode 100644 index c378b3ef..00000000 --- a/docs/mcc-help/cs/drakbug_report.xml +++ /dev/null @@ -1,71 +0,0 @@ -
- - - Sbírat logy a systémové informace pro hlášení chybdrakbug_report - - - This toolYou can start this tool from the command line, by typing drakbug_report as root. can only be started and used -on the command line. - -It is advised to write the output of this command to a file, for instance by -doing drakbug_report > drakbugreport.txt, -but make sure you have enough disk space first: the file can easily be -several GBs large. -The output is far too large to attach to a bug report without first removing -the unneeded parts. - Tyto následující příkazy shromažďují informace o vašem systému: - - - lspci - pci_devices - dmidecode - fdisk - scsi - /sys/bus/scsi/devices - lsmod - cmdline - pcmcia: stab - usb - partitions - cpuinfo - syslog - Xorg.log - monitor_full_edid - stage1.log - ddebug.log - install.log - fstab - modprobe.conf - lilo.conf - grub: menu.lst - grub: install.sh - grub: device.map - xorg.conf - urpmi.cfg - modprobe.preload - sysconfig/i18n - /proc/iomem - /proc/ioport - mageia version - rpm -qa - df - - - - At the time this help page was written, the "syslog" part of this command's -output was empty, because this tool had not yet been adjusted to our switch -to systemd. If it is still empty, you can retrieve the "syslog" by doing (as -root) journalctl -a > journalctl.txt. If -you don't have a lot of diskspace, you can, for instance, take the last 5000 -lines of the log instead with: journalctl -a | tail --n5000 > journalctl5000.txt. - -
diff --git a/docs/mcc-help/cs/drakclock.xml b/docs/mcc-help/cs/drakclock.xml deleted file mode 100644 index 5bf74c02..00000000 --- a/docs/mcc-help/cs/drakclock.xml +++ /dev/null @@ -1,50 +0,0 @@ -
- - Upravit datum a čas - - drakclock - - - - - - - - - This tool - You can start this tool from the command line, by typing drakclock as root. - is found under the tab System -in the Mageia Control Center labelled "Manage date and -time". In some desktop environments it is also available by a -right click / Adjust date and Time ... on the clock in the system tray. - - It's a very simple tool. - - On the upper left part, is the calendar. On -the screenshot above, the date is September (on the upper left), 2012 (on -the upper right), the 2nd (in blue) and it is a Sunday. Select the month -(or year) by clicking on the little arrows on each side of September (or -2012). Select the day by clicking on its number. - - On the bottom left is the Network Time -Protocol synchronising, it is possible to have a clock always on -time by synchronising it with a server. Check Enable Network Time -Protocol and choose the closest server. - - On the right part is the clock. It's -useless to set the clock if NTP is enabled. Three boxes display hours, -minutes and seconds (15, 28 and 22 on the screenshot). Use the little arrows -to set the clock to the correct time. The format can't be changed here, see -your desktop environment settings for that. - - At least, on the bottom right, select your time zone by clicking on the -Change Time Zone button and choosing in the list the -nearest town. - - - Even if it isn't possible to choose a date or time format in this tool, they -will be displayed on your desktop in accordance with the localisation -settings. - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakconnect--del.xml b/docs/mcc-help/cs/drakconnect--del.xml deleted file mode 100644 index e1711584..00000000 --- a/docs/mcc-help/cs/drakconnect--del.xml +++ /dev/null @@ -1,18 +0,0 @@ -
- - Odstranit připojenídrakconnect --del - - - - - - - - - Zde můžete mazat síťové rozhraníYou can also start this tool from the command line, by typing drakconnect --del as root.. - Click on the drop down menu, choose the one you want to remove and then -click next. - You'll see a message that the network interface has been deleted -successfully. -
diff --git a/docs/mcc-help/cs/drakconnect.xml b/docs/mcc-help/cs/drakconnect.xml deleted file mode 100644 index 48ce40e9..00000000 --- a/docs/mcc-help/cs/drakconnect.xml +++ /dev/null @@ -1,808 +0,0 @@ -
- - Nastavit nové síťové rozhraní (LAN, ISDN, ADSL, ...) - - drakconnect - - - - - - - - -
- Úvod - - This tool - You can start this tool from the command line, by typing drakconnect as root. - allows to configure much of -local network or Internet access. You have to know some information from -your access provider or your network administrator. - - Select the type of connection you want to set, according to which hardware -and provider you have. -
- -
- Nové pevné připojení (Ethernet) - - - - The first window lists the interfaces which are available. Select the one -to configure. - - - - At this point, the choice is given between an automatic or a manual IP -address. - - - - Automatic IP - - - - Ethernet/IP settings: you have to select if DNS servers -are declared by the DHCP server or are manually specified, as explained -below. In the last case, the IP address of DNS servers has to be set. The -HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, -the name localhost.localdomain is attributed by default. -The Hostname can also be provided by the DHCP server with the option -Assign host name from DHCP server. Not all DHCP servers -have such a function and if you're setting up your PC to get an IP address -from a domestic ADSL router, it is unlikely. - - - - - - - - - - The advanced button give the opportunity to specify: - - - - Search domain (not accessible, as provided by the DHCP server) - - - - the DHCP client - - - - DHCP timeout - - - - Get YP server from DHCP (checked by default): specify the NIS server - - - - Get NTPD server from DHCP (synchronisation of clocks) - - - - the HOSTNAME required by DHCP. Only use this option if the DHCP server -requires the client to specify a hostname before receiving an IP -address. This option is not dealt by some DHCP servers. - - - - - - After accepting, the last steps which are common to all connection -configurations are explained: - - - - - - Ruční nastavení - - - - Ethernet/IP settings: you need to declare what DNS -servers to use. The HOSTNAME of the computer can be specified here. If no -HOSTNAME is specified, the name localhost.localdomain is -attributed by default. - - For a residential network, the IP address usually looks like -192.168.x.x, Netmask is -255.255.255.0, and the Gateway and DNS servers are -available from your service provider's website. - - In advanced settings, you can specified a Search -domain. It would usually be your home domain, i.e. if your -computer is called "splash", and it's full domain name is -"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless -you specifically need it, it's ok not to define this setting. Again, -domestic ADSL would not need this setting. - - - - - - - - - - The next steps are exposed at - - - - -
- -
- A new Satellite connection (DVB) - - This section hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. -
- -
- A new Cable modem connection - - - - The first window lists the interfaces which are available. Select the one -to configure. - - - - At this point, the choice is given between an automatic or a manual IP -address. - - - - You have to specify a authentication method: - - - - Žádné - - - - BPALogin (necessary for Telstra). In this case you have to provide User name -and password. - - - - - - Automatic IP - - - - Cable/IP settings: you have to select if DNS servers -are declared by the DHCP server or are manually specified, as explained -below. In the last case, the IP address of DNS servers has to be set. The -HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, -the name localhost.localdomain is attributed by default. -The Hostname can also be provided by the DHCP server with the option -Assign host name from DHCP server. Not all DHCP servers -have such a function and if you're setting up your PC to get an IP address -from a domestic ADSL router, it is unlikely. - - - - The advanced button give the opportunity to specify: - - - - Search domain (not accessible, as provided by the DHCP server) - - - - the DHCP client - - - - DHCP timeout - - - - Get YP server from DHCP (checked by default): specify the NIS server - - - - Get NTPD server from DHCP (synchronisation of clocks) - - - - the HOSTNAME required by DHCP. Only use this option if the DHCP server -requires the client to specify a hostname before receiving an IP -address. This option is not dealt by some DHCP servers. - - - - - - After accepting, the last steps which are common to all connection -configurations are explained: - - - - - - Ruční nastavení - - - - Cable/IP settings: you need to declare what DNS servers -to use. The HOSTNAME of the computer can be specified here. If no HOSTNAME -is specified, the name localhost.localdomain is -attributed by default. - - For a residential network, the IP address usually looks like -192.168.x.x, Netmask is -255.255.255.0, and the Gateway and DNS servers are -available from your service provider's website. - - In advanced settings, you can specified a Search -domain. It would usually be your home domain, i.e. if your -computer is called "splash", and it's full domain name is -"splash.boatanchor.net", the Search Domain would be "boatanchor.net". Unless -you specifically need it, it's ok not to define this setting. Again, -domestic connection would not need this setting. - - - - - - - - - - The next steps are exposed at - - - - -
- -
- A new DSL connection - - - - If the tool detects network interfaces, it offers to select one and to -configure it. - - - - A list of providers is proposed, classified by countries. Select your -provider. If it is not listed, select the option -Unlisted and then enter the options your provider gave. - - - - Select one of the protocols available: - - - - Dynamic Host Configuration Protocol (DHCP) - - - - Ruční nastavení TCP/IP - - - - PPP over ADSL (PPPoA) - - - - PPP přes Ethernet (PPPoE) - - - - Point to Point Tunneling Protocol (PPTP) - - - - - - Nastavení přístupu - - - - Váš účet (uživatelské jméno) - - - - Account password - - - - (Advanced) Virtual Path ID (VPI) - - - - (Advanced) Virtual Circuit ID (VCI) - - - - - - The next steps are exposed at - - -
- -
- A new ISDN connection - - - - The wizard asks which device to configure: - - - - Manual choice (internal ISDN card) - - - - Externí ISDN modem - - - - - - A list of hardware is proposed, classified by category and -manufacturer. Select your card. - - - - Select one of the protocols available: - - - - Protocol for the rest of the world, except Europe (DHCP) - - - - Protocol for Europe (EDSS1) - - - - - - A list of providers is then offered, classified by countries. Select your -provider. If it is not listed, select the option -Unlisted and then enter the options your provider gave -you. Then it is asked for parameters: - - - - Název připojení - - - - Telefonní číslo - - - - Přihlašovací jméno - - - - Account password - - - - Metoda ověření - - - - - - After that, you have to select if you get the IP address by automatic or -manual method. In the last case, specify IP address and Subnet mask. - - - - The next step is to choose how DNS servers address are obtained, by -automatic or manual method. In the case of manual configuration, you have to -put: - - - - Název domény - - - - First and second DNS Server - - - - Select if the hostname is set from IP. This option is to select only if you -are sure that your provider is configured to accept it. - - - - - - The next step is to choose how the gateway address is obtained, by automatic -or manual method. In the case of manual configuration, you have to enter the -IP address. - - - - The next steps are exposed at - - -
- -
- A new Wireless connection (WiFi) - - - - A first window lists the interfaces which are available and an entry for -Windows driver (ndiswrapper). Select the one to configure. Use ndiswrapper -only if the other configuration methods did not work. - - - - At this step, the choice is given between the different access points that -the card has detected. - - - - Specific parameter for the wireless card are to provide: - - - - - - - - - - Operating mode: - - - - Spravované - - - To access to an existing access point (the most frequent). - - - - - Ad-Hoc - - - To configure direct connection between computers. - - - - - - - Network Name (ESSID) - - - - Encryption mode: it depends of how the access point is configured. - - - - WPA/WPA2 - - - This encryption mode is to prefer if your hardware allows it. - - - - - WEP - - - Some old hardware deals only this encryption method. - - - - - - - Šifrovací klíč - - It is generally provided with the hardware which give the access point. - - - - - - At this step, the choice is given between an automatic IP address or a -manual IP address. - - - - Automatic IP - - - - IP settings: you have to select if DNS servers are -declared by the DHCP server or are manually specified, as explained -below. In the last case, IP address of DNS servers has to be set. The -HOSTNAME of the computer can be specified here. If no HOSTNAME is -specified, the name localhost.localdomain is attributed by default. The -Hostname can also be provided by the DHCP server with the option -Assign host name from DHCP server - - - - The advanced button give the opportunity to specify: - - - - Search domain (not accessible, as provided by the DHCP server) - - - - the DHCP client - - - - DHCP timeout - - - - Get YP server from DHCP (checked by default): specify the NIS servers - - - - Get NTPD server from DHCP (synchronisation of clocks) - - - - the HOSTNAME required by DHCP. Only use this option if the DHCP server -requires the client to specify a hostname before receiving an IP -address. This option is not dealt by some DHCP servers. - - - - - - After accepting the configuration the step, which is common to all -connection configurations, is explained: - - - - - - Ruční nastavení - - - - IP settings: you have to declare DNS servers. The -HOSTNAME of the computer can be specified here. If no HOSTNAME is specified, -the name localhost.localdomain is attributed by default. - - For a residential network, the IP address always looks like -192.168.x.x, Netmask is -255.255.255.0, and the Gateway and DNS servers are -available from your providers website. - - In advanced settings, you can specified a Search -domain. It must seem to your hostname without the first name, -before the period. - - - - The next steps are exposed at - - - - -
- -
- A new GPRS/Edge/3G connection - - - - If the tool detects wireless interfaces, it offers to select one and to -configure it. - - - - The PIN is asked. Leave empty if the PIN is not required. - - - - The wizard asks for network. If it is not detected, select the option -Unlisted. - - - - A list of providers is proposed, classified by countries. Select your -provider. If it is not listed, select the option -Unlisted and then enter the options your provider gave. - - - - Provide access settings - - - - Název přístupového bodu - - - - Váš účet (uživatelské jméno) - - - - Account password - - - - - - The next steps are exposed at - - -
- -
- A new Bluetooth Dial-Up Networking connection - - This section hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. -
- -
- A new Analog telephone modem connection (POTS) - - - - The wizard asks which device to configure: - - - - Ruční volba - - - - Detected hardware, if any. - - - - - - A list of ports is proposed. Select your port. - - - - If not yet installed, it will be suggested that you install the package -kppp-provider. - - - - A list of providers is proposed, classified by countries. Select your -provider. If it is not listed, select the option -Unlisted and then enter the options your provider -gave. Then it is asked for Dialup options: - - - - Connection name - - - - Phone number - - - - Login ID - - - - Password - - - - Authentication, choose between: - - - - PAP/CHAP - - - - Script-based - - - - PAP - - - - Terminal-based - - - - CHAP - - - - - - - - The next steps are exposed at - - -
- -
- Ending the configuration - - In the next step, you can specify: - - - - Allow users to manage the connection - - - - Start the connection at boot - - - - Enable traffic accounting - - - - Allow interface to be controlled by Network Manager - - - - In the case of a wireless connection, a supplemental box is Allow -access point roaming which give the possibility to switch -automatically between access point according to the signal strength. - - - - With the advanced button, you can specify: - - - - Metrika (výchozí je 10) - - - - MTU - - - - Rychlé připojení do sítě - - - - Povolit tunel IPv6 na IPv4 - - - - The last step allows you to specify if the connection is to start -immediately or not. - - - - - - -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakconsole.xml b/docs/mcc-help/cs/drakconsole.xml deleted file mode 100644 index 6e6657dc..00000000 --- a/docs/mcc-help/cs/drakconsole.xml +++ /dev/null @@ -1,20 +0,0 @@ -
- - Spustit konzoli pro správce systému - - drakconsole - - - - - - - - - This tool - You can start this tool from the command line, by typing drakconsole as root. - gives you access to a console -which is directly opened as root. We do not think that you need more -information about that. -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakdisk.xml b/docs/mcc-help/cs/drakdisk.xml deleted file mode 100644 index 07a58ad3..00000000 --- a/docs/mcc-help/cs/drakdisk.xml +++ /dev/null @@ -1,82 +0,0 @@ -
- - - - Spravovat diskové oddíly - - drakdisk nebo diskdrake - - - - - - - - - - This tool - You can start this tool from the command line, by typing drakdisk or diskdrake as root. - is very powerful, a tiny -error or a cat jumping on your keyboard can lead to losing all data on a -partition or even to erasing the entire hard disk. For that reason, you'll -see the screen above on top of the tool screen. Click on -Exit if you're not sure you want to continue. - - - If you have more than one hard disk, you can switch to the hard disk you -want to work on by selecting the correct tab (sda, sdb, sdc etc). - - - - - - - - You can choose from many actions to adjust your hard disk to your -preferences. Wiping an entire hard disk, splitting or merging partitions, -resizing them or changing the filesystem, formatting or viewing what is in a -partition: it is all possible. The Clear -all button at the bottom is to erase the complete -disk, the other buttons become visible on the right after you click on a -partition. - - - - - - If you have an UEFI system, you can see a small partition called "EFI System -Partition" and mounted on /boot/EFI. Never delete it, because it contains -all your different operating systems bootloaders. - - - If the selected partition is mounted, like in the example below, you cannot -choose to resize, format or delete it. To be able to do that the partition -must be unmounted first. - - It is only possible to resize a partition on its right side - - To change a partition type (change ext3 to ext4 for example) you have to -delete the partition and then re-create it with the new type. The button -Create appears when a disk empty part is -selected - - You can choose a mount point that doesn't exist, it will be created. - - - - - - - - Selecting Toggle to expert mode -gives some extra available actions, like labeling the partition, as can be -seen in the screenshot below. - - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakedm.xml b/docs/mcc-help/cs/drakedm.xml deleted file mode 100644 index d6010e3e..00000000 --- a/docs/mcc-help/cs/drakedm.xml +++ /dev/null @@ -1,20 +0,0 @@ -
- - - -Nastavit správce obrazovky - drakedm - - - - - - - HereYou can start this tool from the command line, by typing drakedm as root. you can choose which display -manager to use to log into your desktop environment. Only the ones available -on your system will be shown. - Most users will only notice that the provided login screens look -different. However, there are differences in supported features, too. LXDM -is a lightweight display manager, SDDM and GDM have more extras. -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakfirewall.xml b/docs/mcc-help/cs/drakfirewall.xml deleted file mode 100644 index 442e69ae..00000000 --- a/docs/mcc-help/cs/drakfirewall.xml +++ /dev/null @@ -1,86 +0,0 @@ -
- - Nastavit váš osobní firewall - - drakfirewall - - - - - - - - - This tool - You can start this tool from the command line, by typing drakfirewall as root. - is found under the Security -tab in the Mageia Control Center labelled "Set up your personal -firewall". It is the same tool in the first tab of "Configure system -security, permissions and audit". - - A basic firewall is installed by default with Mageia. All the incoming -connections from the outside are blocked if they aren't authorised. In the -first screen above, you can select the services for which outside connection -attempts are accepted. For your security, uncheck the first box - -Everything (no firewall) - unless you want to disable -the firewall, and only check the needed services. - - It is possible to manually enter the port numbers to open. Click on -Advanced and a new window is opened. In the field -Other ports, enter the needed ports following these -examples : - - 80/tcp : otevře port 80 protokolu TCP - - 24000:24010/udp : otevře všechny porty od 24000 do 24010 protokolu UDP - - Uvedené porty by měly být odděleny mezerou. - - If the box Log firewall messages in system logs is -checked, the firewall messages will be saved in system logs - - - - - - - - - If you don't host specific services (web or mail server, file sharing, ...) -it is completely possible to have nothing checked at all, it is even -recommended, it won't prevent you from connecting to the internet. - - - The next screen deals with the Interactive Firewall options. These feature -allow you to be warned of connection attempts if at least the first box -Use Interactive Firewall is checked. Check the second -box to be warned if the ports are scanned (in order to find a failure -somewhere and enter your machine). Each box from the third one onwards -corresponds to a port you opened in the two first screens; in the screenshot -below, there are two such boxes: SSH server and 80:150/tcp. Check them to be -warned each time a connection is attempted on those ports. - - These warning are given by alert popups through the network applet. - - - - - - - - - - - - - - In the last screen, choose which network interfaces are connected to the -Internet and must be protected. Once the OK button is clicked, the necessary -packages are downloaded. - - - If you don't know what to choose, have a look in MCC tab Network & -Internet, icon Set up a new network interface. - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakfont.xml b/docs/mcc-help/cs/drakfont.xml deleted file mode 100644 index a49fdf87..00000000 --- a/docs/mcc-help/cs/drakfont.xml +++ /dev/null @@ -1,66 +0,0 @@ -
- - Spravovat, přidávat a odebírat písma, včetně importu písem ze systému -Windows(TM) - - drakfont - - - - - - - - - This tool - Tento nástroj můžete spustit z příkazového řádku zadáním drakfont jako root. - is present in the Mageia -Control Center under the System tab. It -allows you to manage the fonts available on the computer. The main screen -above shows: - - - - the installed font names, styles and sizes. - - - - a preview of the selected font. - - - - some buttons explained here later. - - - - - - Get Windows Fonts: - - This button automatically adds the fonts found on the Windows partition. You -must have Microsoft Windows installed. - - Options: - - It allows you to specify the applications or devices (printers mostly) able -to use the fonts. - - Uninstall: - - This button is to remove installed fonts and possibly save some place. Be -careful when removing fonts because it may have serious consequences on the -documents that use them. - - Import: - - Allows you to add fonts from a third party (CD, internet, ...). The -supported formats are ttf, pfa, pfb, pcf, pfm and gsf. Click on the -Import button and then on Add, a file manager pops up where you can select the -fonts to install, click on Install when -done. They are installed in the folder /usr/share/fonts. - - If the newly installed (or removed) fonts doesn't appear in the Drakfont -main screen, close and re open it to see the modifications. -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakguard.xml b/docs/mcc-help/cs/drakguard.xml deleted file mode 100644 index 458cb7ae..00000000 --- a/docs/mcc-help/cs/drakguard.xml +++ /dev/null @@ -1,100 +0,0 @@ -
- - Rodičovský dohled - - drakguard - - - - - - - - - This tool - You can start this tool from the command line, by typing drakguard as root. - is found in the Mageia -Control Center, under the Security tab, labelled Parental -Control. If you don't see this label, you have to install the -drakguard package (not installed by default). - -
- Presentation - - Drakguard is an easy way to set up parental controls on your computer to -restrict who can do what, and at which times of day. Drakguard has three -useful capabilities: - - - - It restricts web access to named users to set times of day. It does this by -controlling the shorewall firewall built into Mageia. - - - - It blocks execution of particular commands by named users so these users can -only execute what you accept them to execute. - - - - It restricts access to websites, both manually defined through -blacklists/whitelists, but also dynamically based on the content of the -website. To achieve this Drakguard uses the leading opensource parental -control blocker DansGuardian. - - -
- -
- Nastavení rodičovského dohledu - - - If your computer contains hard drive partitions that are formatted in Ext2, -Ext3, or ReiserFS format you will see a pop up offering to configure ACL on -your partitions. ACL stands for Access Control Lists, and is a Linux kernel -feature that allows access to individual files to be restricted to named -users. ACL is built into Ext4 and Btrfs file systems, but must be enabled by -an option in Ext2, Ext3, or Reiserfs partitions. If you select 'Yes' to this -prompt drakguard will configure all your partitions to support ACL, and will -then suggest you reboot. - Enable parental control: If checked, the parental -control is enabled and the access to Block programs tab -is opened. - - Block all network traffic: If checked, all the -websites are blocked, except the ones in the whitelist tab. Otherwise, all -the websites are allowed, except the ones in the blacklist tab. - - User access: Users on the left hand side will have -their access restricted according to the rules you define. Users on the -right hand side have unrestricted access so adult users of the computer are -not inconvenienced. Select a user in the left hand side and click on -Add to add him/her as an allowed user. Select an -user in the right hand side and click on Remove to -remove him/her from the allowed users. - - Time control: If checked, internet access is allowed -with restrictions between the Start time and -End time. It is totally blocked outside these time -window. - -
- Blacklist/Whitelist tab - - Enter the website URL in the first field at the top and click on the -Add button. -
- -
- Block Programs Tab - - Block Defined Applications: Enables the use of ACL to -restrict access to specific applications. Insert the path to the -applications you wish to block. - - Unblock Users list: Users listed on the right hand -side will not be subject to acl blocking. -
-
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakgw.xml b/docs/mcc-help/cs/drakgw.xml deleted file mode 100644 index bccce7ea..00000000 --- a/docs/mcc-help/cs/drakgw.xml +++ /dev/null @@ -1,123 +0,0 @@ - -
- - Sdílet připojení k internetu s ostatními lokálními počítači - - drakgw - - - - - - - - - - -
- Zásady - - - - - - This is useful when you have a -computer (3) which has Internet (2) access and is connected also to a local -network (1). You can use computer (3) as a gateway to give that access to -other workstations (5) and (6) in the local network (1). For this, the -gateway must have two interfaces; the first one such as an ethernet card -must be connected to the local network, and the second one (4) connected to -the Internet (2). - - The first step is to verify that the network and the access to Internet are -set up, as documented in . -
- -
- Gateway wizard - - The wizard - You can start this tool from the command line, by typing drakgw as root. - offers successive steps -which are shown below: - - - - If the wizard does not detect at least two interfaces, it warns about this -and asks to stop the network and configure the hardware. - - - - specify the interface used for the Internet connection. The wizard -automatically suggests one of the interfaces, but you should verify that -what is proposed is correct. - - - - specify which interface is used for the Lan access. The wizard also proposes -one, check that this is correct. - - - - The wizard proposes parameters for the Lan network, such as IP address, mask -and domain name. Check that these parameters are compatible with the actual -configuration. It is recommended that you accept these values. - - - - specify if the computer has to be used as a DNS server. If yes, the wizard -will check that bind is installed. Otherwise, you have to -specify the address of a DNS server. - - - - specify if the computer is to be used as a DHCP server. If yes, the wizard -will check that dhcp-server is installed and offer to configure -it, with start and end addresses in the DHCP range. - - - - specify if the computer is to be used as a proxy server. If yes, the wizard -will check that squid is installed and offer to configure it, -with the address of the administrator (admin@mydomain.com), name of the -proxy (myfirewall@mydomaincom), the port (3128) and the cache size (100 Mb). - - - - The last step allows you to check if the gateway machine is connected to -printers and to share them. - - - - You will be warned about the need to check the firewall if it is active. -
- -
- Configure the client - - If you have configured the gateway machine with DHCP, you only need to -specify in the network configuration tool that you get an address -automatically (using DHCP). The parameters will be obtained when connecting -to the network. This method is valid whatever operating system the client is -using. - - If you must manually specify the network parameters, you must in particular -specify the gateway by entering the IP-address of the machine acting as the -gateway. -
- -
- Stop connection sharing - - If you want to stop sharing the connection on the Mageia computer, launch -the tool. It will offer to reconfigure the connection or to stop the -sharing. -
-
diff --git a/docs/mcc-help/cs/drakhosts.xml b/docs/mcc-help/cs/drakhosts.xml deleted file mode 100644 index afbbd432..00000000 --- a/docs/mcc-help/cs/drakhosts.xml +++ /dev/null @@ -1,34 +0,0 @@ -
- - Určení adres počítačů - - drakhosts - - - - - - - - - If some systems on your network grant you services, and have fixed -IP-addresses, this tool - You can start this tool from the command line, by typing drakhosts as root. - allows to -specify a name to access them more easily. Then you can use that name -instead of the IP-address. - - Add - - With this button, you add the name for a new system. You will get a window -to specify the IP-address, the host name for the system, and optionally an -alias which can be used in the same way that the name is. - - Modify - - You can access the parameters of an entry previously defined. You get the -same window. - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakinvictus.xml b/docs/mcc-help/cs/drakinvictus.xml deleted file mode 100644 index e8c9fa08..00000000 --- a/docs/mcc-help/cs/drakinvictus.xml +++ /dev/null @@ -1,19 +0,0 @@ -
- - Pokročilé nastavení síťových rozhraní a firewallůdrakinvictus - - - - - - - - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - You can start this tool from the command line, by typing drakinvictus as root. -
diff --git a/docs/mcc-help/cs/draknetcenter.xml b/docs/mcc-help/cs/draknetcenter.xml deleted file mode 100644 index fb7803c7..00000000 --- a/docs/mcc-help/cs/draknetcenter.xml +++ /dev/null @@ -1,220 +0,0 @@ -
- - - - - - - -Síťové centrum - - draknetcenter - - - - - - - - - This tool - You can start this tool from the command line, by typing draknetcenter as root. - is found under the Network -& Internet tab in the Mageia Control Center labelled "Network Center" - - - -
- Úvod - - When this tool is launched, a window opens listing all the networks -configured on the computer, whatever their type (wired, wireless, satellite, -etc.). When clicking on one of them, three or four buttons appear, depending -on the network type, to allow you to look after the network, change its -settings or connect/disconnect. This tool isn't intended to create a -network, for this see Set up a new network interface (LAN, ISDN, -ADSL, ...) in the same MCC tab. - - In the screenshot below, given as example, we can see two networks, the -first one is wired and connected, recognizable by this icon - - - - (this one is not connected - - - - ) and the second section shows wireless -networks, not connected recognizable by this icon - - - - and this one - - - - if connected. For the other network types, -the colour code is always the same, green if connected and red if not -connected. - - In the wireless part of the screen, you can also see all the detected -networks, with the SSID, the Signal -strengh, if they are encrypted (in red) or not (in green), and -the Operating mode. Click on the chosen one and then -either on Monitor, Configure -or Connect. It is possible here to go from a network -to another one. If a private network is selected, the Network Settings -window (see below) will open and ask you for extra settings ( an encryption -key in particular). - - Click on Refresh to update the screen. - - - - - - - - -
- -
- The Monitor button - - - - - - - - This button allows you to watch the network activity, downloads (toward the -PC, in red) and uploads (toward the Internet, in green). The same screen is -available by right clicking on the Internet icon in the system tray --> Monitor Network. - - There is a tab for each network (here eth0 is the wired network, lo the -local loopback and wlan0 the wireless network) and a tab connection which -gives details about connection status. - - - At the bottom of the window is a title Traffic -accounting, we will look at that in the next section. - -
- -
- The Configure button - - A - For a wired network - - - - - - - - It is possible to change all the settings given during network -creation. Most of the time, checking Automatic IP -(BOOTP/DHCP) will do, but in case of problems, manual -configuration may give better results. - - For a residential network, the IP address always looks -like 192.168.0.x, Netmask is 255.255.255.0, and the -Gateway and DNS servers are -available from your providers website. - - Enable traffic accounting if checked this will count -the traffic on a hourly, daily or monthly basis. The results are visible in -the Network monitor detailed in the previous section. Once enabled, you may -have to reconnect to the network. - - Allow interface to be controlled by Network -Manager: - - This section hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - The button Advanced: - - This section hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - - - - - - - B - For a wireless network - - Only the items not already seen above are explained. - - - - - - - - Operating mode: - - Select Managed if the connection is via an access -point, there is an ESSID detected. Select -Ad-hoc if it is a peer to peer network. Select -Master if your network card is used as the -access point, your network card needs to support this mode. - - Encryption mode and Encryption key: - - If it is a private network, you need to know these settings. - - WEP uses a password and is weaker than WPA which uses a -passphrase. WPA Pre-Shared Key is also called WPA -personal or WPA home. WPA Enterprise is not often used -in private networks. - - Allow access point roaming: - - Roaming is a technology which enables allows computer to change its access -point while remaining connected to the network. - - The button Advanced: - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - - - - - - - -
- -
- The Advanced Settings button - - This section hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - - - - - - - -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/draknetprofile.xml b/docs/mcc-help/cs/draknetprofile.xml deleted file mode 100644 index cb7f6726..00000000 --- a/docs/mcc-help/cs/draknetprofile.xml +++ /dev/null @@ -1,19 +0,0 @@ -
- - Spravovat různé síťové profilydraknetprofile - - - - - - - - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - You can start this tool from the command line, by typing draknetprofile as root. -
diff --git a/docs/mcc-help/cs/draknfs.xml b/docs/mcc-help/cs/draknfs.xml deleted file mode 100644 index 43e5f60b..00000000 --- a/docs/mcc-help/cs/draknfs.xml +++ /dev/null @@ -1,165 +0,0 @@ - -
- - Nastavit sdílení disků a adresářů pomocí NFS - - draknfs - - - - - - - - - - -
- Předpoklady - - When the wizard - You can start this tool from the command line, by typing draknfs as root. - is launched for the -first time, it may display the following message: - -
- The package nfs-utils needs to be installed. Do you want to install it? -
- - After completing the installation, a window with an empty list is displayed. -
- -
- Main window - - A list of directories which are shared is displayed. At this step, the list -is empty. The Add button gives access to a -configuration tool. -
- -
- Upravit záznam - - The configuration tool is labeled "Modify entry". It may be also launched -with the Modify button. The following parameters are -available. - - - - - - - -
- Adresář NFS - - Here you can specify which directory is to be shared. The -Directory button gives access to a browser to choose -it. -
- -
- Přístup k počítači - - Here you can specify the hosts that are authorized to access the shared -directory. - - NFS clients may be specified in a number of ways: - - single host: a host either by an abbreviated name -recognized be the resolver, fully qualified domain name, or an IP address - - netgroups: NIS netgroups may be given as @group. - - wildcards: machine names may contain the wildcard -characters * and ?. For instance: *.cs.foo.edu matches all hosts in the -domain cs.foo.edu. - - IP networks: you can also export directories to all -hosts on an IP (sub-)network simultaneously. For example, either -`/255.255.252.0' or `/22' appended to the network base address. -
- -
- Mapování uživatelského ID - - map root user as anonymous: maps requests from uid/gid -0 to the anonymous uid/gid (root_squash). The root user from the client -cannot read or write to the files on the server which are created by root on -the server itself. - - allow real remote root access: turn off root -squashing. This option is mainly useful for diskless clients -(no_root_squash). - - map all users to anonymous user: maps all uids and gids -to the anonymous user (all_squash). Useful for NFS-exported public FTP -directories, news spool directories, etc. The opposite option is no user UID -mapping (no_all_squash), which is the default setting. - - anonuid and anongid: explicitly set the uid and gid of -the anonymous account. -
- -
- Pokročilé volby - - Secured Connection: this option requires that requests -originate on an internet port less than IPPORT_RESERVED (1024). This option -is on by default. - - Read-Only share: allow either only read or both read -and write requests on this NFS volume. The default is to disallow any -request which changes the filesystem. This can also be made explicit by -using this option. - - Synchronous access: prevents the NFS server from -violating the NFS protocol and to reply to requests before any changes made -by these requests have been committed to stable storage (e.g. disc drive). - - Subtree checking: enable subtree checking which can -help improve security in some cases, but can decrease reliability. See -exports(5) man page for more details. -
-
- -
- Menu entries - - So far the list has at least one entry. - - - - - - - -
- File|Write conf - - Save the current configuration. -
- -
- NFS Server|Restart - - The server is stopped and restarted with the current configuration files. -
- -
- NFS Server|Reload - - The configuration displayed is reloaded from the current configuration -files. -
-
-
diff --git a/docs/mcc-help/cs/drakproxy.xml b/docs/mcc-help/cs/drakproxy.xml deleted file mode 100644 index 05641e56..00000000 --- a/docs/mcc-help/cs/drakproxy.xml +++ /dev/null @@ -1,37 +0,0 @@ - -
- - Proxy - - drakproxy - - - - - - - - - If you have to use a proxy server to access to the internet, you can use -this tool - You can start this tool from the command line, by typing drakproxy as root. - to configure it. Your net -administrator will give you the information you need. You can also specify -some services which can be accessed without the proxy by exception. - - From Wikipedia, on 2012-09-24, article Proxy server: In computer networks, a -proxy server is a server (a computer system or an application) that acts as -an intermediary for requests from clients seeking resources from other -servers. A client connects to the proxy server, requesting some service, -such as a file, connection, web page, or other resource available from a -different server. The proxy server evaluates the request as a way to -simplify and control their complexity. -
diff --git a/docs/mcc-help/cs/drakrpm-edit-media.xml b/docs/mcc-help/cs/drakrpm-edit-media.xml deleted file mode 100644 index aa020f18..00000000 --- a/docs/mcc-help/cs/drakrpm-edit-media.xml +++ /dev/null @@ -1,211 +0,0 @@ -
- - Nastavení zdrojů - - drakrpm-edit-media - - - - - - - - - - - - - - - - First thing to do after an install is to add software sources (also known as -repositories, media, mirrors). That means you must select the media sources -to be used to install and update packages and applications. (see Add button -below). - - If you install (or upgrade) Mageia using an optical media (DVD or CD) or a -USB device, there will be a software source configured to the optical media -used. To avoid being asked to insert the media when you install new -packages, you should disable (or delete) this media.  (It will have the -media type CD-Rom). - - Your system is running under an architecture which may be 32-bit (called -i586), or 64-bit (called x86_64). Some packages are independent of whether -your system is 32-bit or 64-bit; these are called noarch packages. They -don't have their own noarch directories on the mirrors, but are all in both -the i586 and the x86_64 media. - - - This tool is present in the Mageia Control Center under the tab Software management. - You can start this tool from the command line, by typing drakrpm-edit-media as root. - - -
- The columns - - Column Enable: - - The checked media will be used to install new packages. Be cautious with -some media such as Testing and Debug, they could make your system unusable. - - Column Update: - - The checked media will be used to update packages, it must be enabled. Only -media with "Update" in its name should be selected. For security reasons, -this column isn't modifiable in this tool, you must open a console as root -and type drakrpm-edit-media --expert. - - Column medium: - - Display the medium name. Mageia official repositories for final release -versions contain at least: - - - - Core which contains most programs available -supported by Mageia. - - - - Nonfree which contains some programs which -are not free - - - - Tainted free software for which there might -be patent claims in some countries. - - Each medium has 4 sub-sections: - - - - Release the packages as of the day the this -version of Mageia was released. - - - - Updates the packages updated since release -due to security or bug concerns. Everyone should have this medium enabled, -even with a very slow internet connection. - - - - Backports some packages of new versions -backported from Cauldron (the next version under development). - - - - Testing which is used for temporary tests -of new updates, to allow the bug reporters and the QA team to validate the -corrections. - - -
- -
- The buttons on the right - - Remove: - - To remove a medium, click on it and then on this button. It is wise to -remove the medium used for the installation (CD or DVD for example) since -all the packages it contains are in the official Core release medium. - - Edit: - - Allows you to modify the selected medium settings, (URL, downloader and -proxy). - - Add: - - Add the official repositories available on the Internet. These repositories -contain only safe and well tested software. Clicking on the "Add" button -adds the mirrorlist to your configuration, it is designed to make sure that -you install and update from a mirror close to you. If you prefer to choose a -specific mirror, then add it by choosing "Add a specific media mirror" from -the drop-down "File" menu. - - Up and down arrows: - - Change the list order. When Drakrpm looks for a package, it reads the list -in the displayed order and will install the first package found for the same -release number - in the event of a version mismatch, the latest release will -be installed. So if possible, put the fastest repositories at the top. -
- -
- The menu - - File -> Update: - - A window pops up with the media list. Select the ones you want to update and -click on the Update button. - - File -> Add a specific media mirror: - - Suppose you aren't happy with the actual mirror, because for example it's -too slow or often unavailable, you can choose another mirror. Select all the -actual media and click on Remove to take them -out. Click on File -> Add a specific media mirror, choose -between update only or the full set (if you do not know, choose the -Full set of sources) and accept the contact by -clicking on Yes. This window opens: - - - - - - - - You can see, on the left, a list of countries, choose yours or one very -close by clicking on the > symbol, this will display all the available -mirrors in that country. Select one and click on OK. - - File -> Add a custom medium: - - It is possible to install a new media (from a third party for example) that -isn't supported by Mageia. A new window appears: - - - - - - Select the medium type, find a smart -name that well define the medium and give the URL (or the path, according to -the medium type) - - Options -> Global options: - - This item allows you to choose when to "Verify RPMs to be installed" (always -or never), the download program (curl, wget or aria2) and to define the -download policy for information about the packages (on demand -by default-, -update only, always or never). - - Options -> Manage keys: - - To guarantee a high level of security, digital keys are used to authenticate -the media. It is possible for each medium to allow or disallow a key. In the -window that appear, select a medium and then click on -Add to allow a new key or to select a key and click -on Remove to disallow that key. - - - Do this with care, as with all security-related questions - Options -> Proxy: - - If you need to use a proxy server for internet access, you can configure it -here. You only need to give the Proxy hostname and if -necessary a Username and Password. - - - - For more information about configuring the media, see the Mageia Wiki -page. -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/draksambashare.xml b/docs/mcc-help/cs/draksambashare.xml deleted file mode 100644 index 9e38cff5..00000000 --- a/docs/mcc-help/cs/draksambashare.xml +++ /dev/null @@ -1,251 +0,0 @@ - -
- - Sdílení adresářů a jednotek s pomocí Samby - - draksambashare - - - - - - - - - - -
- Úvod - - Samba je protokol používaný v různých operačních systémech ke sdílení -některých zdrojů, jako adresáře nebo tiskárny. Tento nástroj umožňuje -nastavit stroj jako Samba server pomocí protokolu SMB/CIFS. Tento protokol -se používá také v systému Windows(R) a na pracovních stanic s tímto -operačním systémem lze přistupovat k prostředkům na Samba serveru. -
- -
- Příprava - - To be accessed from other workstations, the server has to have a fixed IP -address. This can be specified directly on the server, for example with -, or at the DHCP server which identifies the -station with its MAC-address and give it always the same address. The -firewall has also to allow the incoming requests to the Samba server. - - -
- -
- Wizard - Standalone server - - At the first run, the tools - You can start this tool from the command line, by typing draksambashare as root. - checks if -needed packages are installed and proposes to install them if they are not -yet present. Then the wizard to configure the Samba server is launched. - - - - - - - - In the next window the Standalone server configuration option is already -selected. - - - - - - - - Then specify the name of the workgroup. This name should be the same for the -access to the shared resources. - - The netbios name is the name which will be used to designate the server on -the network. - - - - - - - - Choose the security mode: - - - - user: the client must be authorized to access the -resource - - - - share: the client authenticates itself separately for -each share - - - - You can specify which hosts are allowed to access the resources, with IP -address or host name. - - - - - - - - Specify the server banner. The banner is the way this server will be -described in the Windows workstations. - - - - - - - - The place where Samba can log information can be specified at the next step. - - - - - - - - The wizard displays a list of the chosen parameters before you accept the -configuration. When accepted, the configuration will be written in -/etc/samba/smb.conf. - - - - - - -
- -
- Wizard - Primary domain controller - - - - - - If the "Primary domain controller" -option is selected, the wizard asks for indication if Wins is to support or -not and to provide admin users names. The following steps are then the same -as for standalone server, except you can choose also the security mode: - - - - domain: provides a mechanism for storing all user and -group accounts in a central, shared, account repository. The centralized -account repository is shared between (security) controllers. - - -
- -
- Declare a directory to share - - With the Add button, we get: - - - - - - - - A new entry is thus added. It can be modified with the -Modify button. Options can be edited, such as whether -the directory is visible to the public, writable or browseable. The share -name can not be modified. - - - - - - - - -
- -
- Menu entries - - When the list has at least one entry, menu entries can be used. - - - File|Write conf - - Save the current configuration in /etc/samba/smb.conf. - - - - Samba server|Configure - - The wizard can be run again with this command. - - - - Samba server|Restart - - The server is stopped and restarted with the current configuration files. - - - - Samba Server|Reload - - The configuration displayed is reloaded from the current configuration -files. - -
- -
- Printers share - - Samba also allows you to share printers. - - - - - - -
- -
- Samba users - - In this tab, you can add users who are allowed to access the shared -resources when authentication is required. You can add users from - - - - -
-
diff --git a/docs/mcc-help/cs/draksec.xml b/docs/mcc-help/cs/draksec.xml deleted file mode 100644 index 4d1c434a..00000000 --- a/docs/mcc-help/cs/draksec.xml +++ /dev/null @@ -1,54 +0,0 @@ -
- - Konfigurace ověřování na nástroje Mageia - - draksec - - - - - - - - - This tool - You can start this tool from the command line, by typing draksec as root. - is present in the Mageia -Control Center under the tab Security - - It allows to give the regular users the needed rights to accomplish tasks -usually done by the administrator. - - Click on the little arrow before the item you want to drop down: - - - - - - - - - Most of the tools available in the Mageia Control Center are displayed in -the left side of the window (see the screenshot above) and for each tool, a -drop down list on the right side gives the choice between: - - - - Default: The launch mode depends on the chosen security level. See in the -same MCC tab, the tool "Configure system security, permissions and audit". - - - - User password: The user password is asked before the tool launching. - - - - Administrator password: The root password is asked before the tool launching - - - - No password: The tool is launched without asking any password. - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/draksnapshot-config.xml b/docs/mcc-help/cs/draksnapshot-config.xml deleted file mode 100644 index a52a9816..00000000 --- a/docs/mcc-help/cs/draksnapshot-config.xml +++ /dev/null @@ -1,49 +0,0 @@ - -
- - Snímky - draksnapshot-config - - - - - - - - - This toolYou can start this tool from the command line, by typing draksnapshot-config as root. is available in MCC's -System tab, in the Administration -tools section. - When you start this tool in MCC for the first time, you will see a message -about installing draksnapshot. Click on Install to -proceed. Draksnapshot and some other packages it needs will be installed. - - Click again on Snapshots, you will see the -Settings screen. Tick Enable -Backups and, if you want to backup the whole system, -Backup the whole system. - If you only want to backup part of your directories, then choose -Advanced. You will see a little pop-up screen. Use the -Add and Remove buttons next to -the Backup list to include or exclude directories and -files from the backup. Use the same buttons next to the -Exclude list to remove subdirectories and/or files from -the chosen directories, that should not be -included in the backup. Click on Close when you are -done. - Now give the path to Where to backup, or choose the -Browse button to select the correct path. Any mounted -USB-key or external HD can be found in /run/media/your_user_name/. - - Click on Apply to make the snapshot. -
diff --git a/docs/mcc-help/cs/draksound.xml b/docs/mcc-help/cs/draksound.xml deleted file mode 100644 index 9ffe91e5..00000000 --- a/docs/mcc-help/cs/draksound.xml +++ /dev/null @@ -1,35 +0,0 @@ -
- - Nastavit zvuk - draksound - - - - - - - This toolYou can start this tool from the command line, by typing draksound as root. is present in the Mageia -Control Center under the tab Hardware. - Draksound deals with the sound configuration, PulseAudio options and -troubleshooting. It will help you if you experience sound problems or if you -change the sound card. - PulseAudio is a sound server. It receives all the sound -inputs, mixes them according to the user preferences and sends the resulting -sound to the output. See Menu ->Sound and video -> PulseAudio -volume control to set these preferences. - PulseAudio is the default sound server and it is recommended to leave it -enabled. - Glitch-Free improves PulseAudio with some programs. It -is also recommended to leave it enabled. - The Troubleshooting button gives assistance with -fixing any problems you may have. You will find it helpful to try this -before asking the community for help. - The Advanced button displays a new window with an -obvious button. - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakups.xml b/docs/mcc-help/cs/drakups.xml deleted file mode 100644 index d1c34e3c..00000000 --- a/docs/mcc-help/cs/drakups.xml +++ /dev/null @@ -1,20 +0,0 @@ -
- - Nastavit UPS pro sledování elektrického napájenídrakups - - - - - - - - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - - You can start this tool from the command line, by typing drakups as root. -
diff --git a/docs/mcc-help/cs/drakvpn.xml b/docs/mcc-help/cs/drakvpn.xml deleted file mode 100644 index ce35c617..00000000 --- a/docs/mcc-help/cs/drakvpn.xml +++ /dev/null @@ -1,81 +0,0 @@ -
- - Configure VPN Connection to secure network access - - drakvpn - - - - - - - - -
- Úvod - - This tool - You can start this tool from the command line, by typing drakvpn as root. - allows to configure secure -access to a remote network establishing a tunnel between the local -workstation and the remote network. We discuss here only of the -configuration on the workstation side. We assume that the remote network is -already in operation, and that you have the connection information from the -network administrator, like a .pcf configuration file . -
- -
- Nastavení - - First, select either Cisco VPN Concentrator or OpenVPN, depending on which -protocol is used for your virtual private network. - - Then give your connection a name. - - At the next screen, provide the details for your VPN connection. - - - - Pro Cisco VPN - - - - - - - - - - - - For openvpn. The openvpn package and its dependencies will be installed the -first time the tool is used. - - - - - - Select the files that you received -from the network administrator. - - Rozšířené parametry: - - - - - - - - The next screen asks for IP-address of the gateway. - - - - When the parameters are set, you have the option of starting the VPN -connection. - - This VPN connection can be set to start automatically with a network -connection. To do this, reconfigure the network connection to always connect -to this VPN. -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakwizard_apache2.xml b/docs/mcc-help/cs/drakwizard_apache2.xml deleted file mode 100644 index 716459e6..00000000 --- a/docs/mcc-help/cs/drakwizard_apache2.xml +++ /dev/null @@ -1,111 +0,0 @@ -
- - Configure webserverdrakwizard apache2 - - - - - - - - - This toolYou can start this tool from the command line, by typing drakwizard apache2 as root. can help you to set up a web -server. - -
- What is a web server? - - Web server is the software that helps to deliver web content that can be -accessed through the Internet. (From Wikipedia) - -
-
- Setting up a web server with drakwizard apache2 - - Welcome to the web server wizard. - - - - Úvod - - - - - - - The first page is just an introduction, click Next. - - - - Selecting Server Exposer: Local Net and/or World - - - - - - - Exposing the web server to the Internet has it's risks. Be ready for bad -things. - - - - Server User Module - - - - - - - Allows users to create their own sites. - - - - User web directory name - - - - - - - The user needs to create and populate this directory, then the server will -display it. - - - - Server Document Root - - - - - - - Allows you to configure the path to the web servers default documents. - - - - Souhrn - - - - - - - Take a second to check these options, then click -Next. - - - - Ukončit - - - - - - - You're done! Click Finish. - - - -
-
diff --git a/docs/mcc-help/cs/drakwizard_bind.xml b/docs/mcc-help/cs/drakwizard_bind.xml deleted file mode 100644 index 8c0eefe3..00000000 --- a/docs/mcc-help/cs/drakwizard_bind.xml +++ /dev/null @@ -1,20 +0,0 @@ -
- - Upravit nastavení DNSdrakwizard bind - - - - - - - - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - - You can start this tool from the command line, by typing drakwizard bind as root. -
diff --git a/docs/mcc-help/cs/drakwizard_dhcp.xml b/docs/mcc-help/cs/drakwizard_dhcp.xml deleted file mode 100644 index fa3e02df..00000000 --- a/docs/mcc-help/cs/drakwizard_dhcp.xml +++ /dev/null @@ -1,194 +0,0 @@ -
- - Upravit nastavení DHCP - - drakwizard dhcp - - - - - - - - - - This tool is broken in Mageia 4 because of new naming scheme for the Net -interfaces - - - This tool - You can start this tool from the command line, by typing drakwizard dhcp as root. - can help you to set up a -DHCP server. It is a component of drakwizard which should -be installed before you can access to it. - -
- What is DHCP? - - The Dynamic Host Configuration Protocol (DHCP) is a -standardized networking protocol used on IP networks that dynamically -configures IP addresses and other information that is needed for Internet -communication. (From Wikipedia) -
- -
- Setting up a DHCP server with drakwizard dhcp - - Welcome to the DHCP server wizard. - - - - Úvod - - - - - - - - The first page is just an introduction, click Next. - - - - Selecting Adaptor - - - - - - - - Choose the network interface, which is connected to the subnet, and for -which DHCP will assign IP addresses, and then click -Next. - - - - Select IP range - - - - - - - - Select the beginning and ending IP addresses of the range of IPs you want -the server to offer, along with the IP of the gateway machine connecting to -some place outside the local network, hopefully close to the Internet, then -click Next. - - - - Souhrn - - - - - - - - Take a second to check these options, then click -Next. - - - - Hold on... - - - - - - - - This can be fixed. Click Previous a few times and -change things around. - - - - Hours later... - - - - - - - - -
- -
- What is done - - - - Installing the package dhcp-server if needed; - - - - Saving /etc/dhcpd.conf in /etc/dhcpd.conf.orig; - - - - Creating a new dhcpd.conf starting from -/usr/share/wizards/dhcp_wizard/scripts/dhcpd.conf.default and -adding the new parameters: - - - - hname - - - - dns - - - - net - - - - ip - - - - mask - - - - rng1 - - - - rng2 - - - - dname - - - - gateway - - - - tftpserverip - - - - dhcpd_interface - - - - - - Also modifying Webmin configuration file -/etc/webmin/dhcpd/config - - - - Restarting dhcpd. - - -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/drakwizard_ntp.xml b/docs/mcc-help/cs/drakwizard_ntp.xml deleted file mode 100644 index 2e724688..00000000 --- a/docs/mcc-help/cs/drakwizard_ntp.xml +++ /dev/null @@ -1,117 +0,0 @@ - -
- - Nastavit čas - - drakwizard ntp - - - - - - - - - - - - This tool - You can start this tool from the command line, by typing drakwizard ntp as root. - purpose is to set the time of -your server synchronised with an external server. It isn't installed by -default and you have to also install the drakwizard and drakwizard-base -packages. - -
- Setup a NTP server with drakwizard ntp - - - - After a welcome screen (see above), the second one ask you to choose three -time servers in the drop down lists and suggests to use pool.ntp.org twice -because this server always points to available time servers. - - - - - - - - - - - - - - - - - - - The following screens allows to choose the region and the city and then, you -arrive on a summary. If something is wrong, you can obviously change it -using the Previousbutton. If everything is right, -click on the Next button to proceed to the test. It -may take a while and you finally get this screen below: - - - - - - - - - - Click on the Finish button to close the tool - - - - -
- -
- What is done - - This tool executes the following steps: - - - - Installing the package ntp if needed - - - - Saving the files /etc/sysconfig/clock to -/etc/sysconfig/clock.orig and -/etc/ntp/step-tickers to -/etc/ntp/step-tickers.orig; - - - - Writing a new file /etc/ntp/step-tickers with the list of -servers; - - - - Modifying the file /etc/ntp.conf by inserting the first server -name; - - - - Stopping and starting crond, atd and -ntpd services; - - - - Setting the hardware clock to the current system time with UTC reference. - - -
-
diff --git a/docs/mcc-help/cs/drakwizard_proftpd.xml b/docs/mcc-help/cs/drakwizard_proftpd.xml deleted file mode 100644 index 35b829d9..00000000 --- a/docs/mcc-help/cs/drakwizard_proftpd.xml +++ /dev/null @@ -1,102 +0,0 @@ -
- - Nastavit FTPdrakwizard proftpd - - - - - - - - - This toolYou can start this tool from the command line, by typing drakwizard proftpd as root. can help you to set up an -FTP server. - -
- What is <acronym>FTP</acronym>? - - File Transfer Protocol (FTP) is a standard network -protocol used to transfer files from one host to another host over a -TCP-based network, such as the Internet. (From Wikipedia) - -
-
- Setting up an FTP server with drakwizard proftpd - - Welcome to the FTP wizard. Buckle up. - - - - Úvod - - - - - - - The first page is just an introduction, click Next. - - - - Selecting Server Exposer: Local Net and/or World - - - - - - - Exposing the FTP server to the Internet has it's risks. Be ready for bad -things. - - - - Server Information - - - - - - - Enter name the sever will use to introduce itself, someone to email -complaints too and whether to allow root login access. - - - - Server Options - - - - - - - Set listening port, jailed user, allow resumes and/or FXP -(File eXchange Protocol) - - - - Souhrn - - - - - - - Take a second to check these options, then click -Next. - - - - Ukončit - - - - - - - You're done! Click Finish. - - - -
-
diff --git a/docs/mcc-help/cs/drakwizard_squid.xml b/docs/mcc-help/cs/drakwizard_squid.xml deleted file mode 100644 index f72347db..00000000 --- a/docs/mcc-help/cs/drakwizard_squid.xml +++ /dev/null @@ -1,238 +0,0 @@ - -
- - Upravit nastavení proxy - - drakwizard squid - - - - - - - - - This tool - You can start this tool from the command line, by typing drakwizard squid as root. - can help you to set up a -proxy server. It is a component of drakwizard which should be installed -before you can access to it. - -
- What is a proxy server? - - A proxy server is a server (a computer system or an application) that acts -as an intermediary for requests from clients seeking resources from other -servers. A client connects to the proxy server, requesting some service, -such as a file, connection, web page, or other resource available from a -different server and the proxy server evaluates the request as a way to -simplify and control its complexity. (From Wikipedia) -
- -
- Setting up a proxy server with drakwizard squid - - Welcome to the proxy server wizard. - - - - Úvod - - - - - - - - The first page is just an introduction, click Next. - - - - Selecting the proxy port - - - - - - - - Select the proxy port browsers will connect through, then click -Next. - - - - Set Memory and Disk Usage - - - - - - - - Set memory and disk cache limits, then click Next. - - - - Select Network Access Control - - - - - - - - Set visibility to local network or world, then click -Next. - - - - Grant Network Access - - - - - - - - Grant access to local networks, then click Next. - - - - Use Upper Level Proxy Server? - - - - - - - - Cascade through another proxy server? If no, skip next step. - - - - Upper Level Proxy URL and Port - - - - - - - - Provide upper level proxy hostname and port, then click -Next. - - - - Souhrn - - - - - - - - Take a second to check these options, then click -Next. - - - - Start during boot? - - - - - - - - Choose if the proxy server should be started during the boot time, then -click Next. - - - - Ukončit - - - - - - - - You're done! Click Finish. - - -
- -
- What is done - - - - Installing the package squid if needed; - - - - Saving /etc/squid/squid.conf in -/etc/squid/squid.conf.orig; - - - - Creating a new squid.conf starting from -squid.conf.default and adding the new parameters: - - - - cache_dir - - - - localnet - - - - cache_mem - - - - http_port - - - - level 1, 2 or 3 and http_access according to level - - - - cache_peer - - - - visible_hostname - - - - - - Restarting squid. - - -
-
diff --git a/docs/mcc-help/cs/drakwizard_sshd.xml b/docs/mcc-help/cs/drakwizard_sshd.xml deleted file mode 100644 index 0fe9b70a..00000000 --- a/docs/mcc-help/cs/drakwizard_sshd.xml +++ /dev/null @@ -1,142 +0,0 @@ -
- - Nastavení démonu OpenSSHdrakwizard sshd - - - - - - - - - - This toolYou can start this tool from the command line, by typing drakwizard sshd as root. can help you to set up an -SSH daemon. - -
- What is <acronym>SSH</acronym>? - - Secure Shell (SSH) is a cryptographic network protocol for secure data -communication, remote command-line login, remote command execution, and -other secure network services between two networked computers that connects, -via a secure channel over an insecure network, a server and a client -(running SSH server and SSH client programs, -respectively). (From Wikipedia) - -
-
- Setting up an <acronym>SSH</acronym> daemon with drakwizard sshd - - Welcome to the Open SSH wizard. - - - - Select Type of Configure Options - - - - - - - Choose Expert for all options or -Newbie to skip steps 3-7, click -Next. - - - - Obecné volby - - - - - - - Sets visibility and root access options. Port 22 is the standard -SSH port. - - - - Authentication Methods - - - - - - - Allow a variety of authentication methods users can use while connecting, -then click Next. - - - - Logging - - - - - - - Choose logging facility and level of output, then click -Next. - - - - Login Options - - - - - - - Configure per-login settings, then click Next. - - - - User Login Options - - - - - - - Configure the user access settings, then click Next. - - - - Compression and Forwarding - - - - - - - Configure X11 forwarding and compression during transfer, then click -Next. - - - - Souhrn - - - - - - - Take a second to check these options, then click -Next. - - - - Ukončit - - - - - - - You're done! Click Finish. - - - -
-
diff --git a/docs/mcc-help/cs/drakxservices.xml b/docs/mcc-help/cs/drakxservices.xml deleted file mode 100644 index 40a32ef6..00000000 --- a/docs/mcc-help/cs/drakxservices.xml +++ /dev/null @@ -1,19 +0,0 @@ -
- - Spouštět a zastavovat systémové službydrakxservices - - - - - - - - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Doc -team. Thanking you in advance. - - You can start this tool from the command line, by typing drakxservices as root. -
diff --git a/docs/mcc-help/cs/harddrake2.xml b/docs/mcc-help/cs/harddrake2.xml deleted file mode 100644 index 61913f8d..00000000 --- a/docs/mcc-help/cs/harddrake2.xml +++ /dev/null @@ -1,87 +0,0 @@ - -
- - Nastavení hardware - - harddrake2 - - - - - - - - - This tool - You can start this tool from the command line, by typing harddrake2 as root. - gives a general view of the -hardware of your computer. When the tool is launched, it executes a job to -look for every element of the hardware. For that, it uses the command -ldetect which refers to a list of hardware in -ldetect-lst package. - -
- The window - - The window is divided in two columns. - - The left column contains a list of the detected hardware. The devices are -grouped by categories. Click on the > to expand the content of a -category. Each device can be selected in this column. - - The right column displays information about the selected device. The -Help -> Fields description gives some information -about the content of the fields. - - According to which type of device is selected, either one or two buttons are -available at the bottom of the right column: - - - - Set current driver options: this can be used to -parameterize the module which is used in relation to the device. This must -used by experts only. - - - - Run config tool: access to the tool which can -configure the device. The tool can often be accessed directly from the MCC. - - - - -
- -
- The menu - - Volby - - The options menu gives the opportunity to check boxes to -enable automatic detection: - - - - modem - - - - Jednotka JAZ - - - - Paralelní jednotka ZIP - - By default these detections are not enabled, because they are slow. Check -the appropriate box(es) if you have this hardware connected. Detection will -be operational the next time this tool is started. -
-
diff --git a/docs/mcc-help/cs/keyboarddrake.xml b/docs/mcc-help/cs/keyboarddrake.xml deleted file mode 100644 index 0c7315aa..00000000 --- a/docs/mcc-help/cs/keyboarddrake.xml +++ /dev/null @@ -1,44 +0,0 @@ -
- - Set up the Keyboard Layout - - - - -keyboarddrake - - - - - - - - -
- Úvod - - The keyboarddrake tool - You can start this tool from the command line, by typing keyboarddrake as root. - helps you -configure the basic layout for the keyboard that you wish to use on -Mageia. It affects the keyboard layout for all users on the system. It can -be found in the Hardware section of the Mageia Control Center (MCC) labelled -"Configure mouse and keyboard". -
- -
- Rozložení klávesnice - - Here you can select which keyboard layout you wish to use. The names (listed -in alphabetical order) describe the language, country, and/or ethnicity each -layout should be used for. -
- -
- Typ klávesnice - - This menu lets you select the type of keyboard you are using. If you are -unsure of which to choose, it is best to leave it as the default type. -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/localedrake.xml b/docs/mcc-help/cs/localedrake.xml deleted file mode 100644 index e75f6761..00000000 --- a/docs/mcc-help/cs/localedrake.xml +++ /dev/null @@ -1,55 +0,0 @@ - -
- - Upravit nastavení lokalizace systému - - localedrake - - - - - - - - - This toolYou can also start this tool from the command line, by typing localedrake as root. - can be found in the System -section of the Mageia Control Center (MCC) labelled "Manage localization for -your system". It opens with a window in which you can choose your -language. The choice is adapted to languages selected during installation. - - The Advanced button give access to activate -compatibility with old encoding (non UTF8). - - The second window shows a list of countries according to the selected -language. The button Other Countries gives access to -countries not listed. - - You have to restart your session after any modifications. - -
- - Vstupní metoda - - In the Other Countries screen you can also select an -input method (from the drop-down menu at the bottom of the list). Input -methods allow users to input multilingual characters (Chinese, Japanese, -Korean, etc). - For Asian and African locales, IBus will be set as default input method so -users should not need to configure it manually. - Other input methods (SCIM, GCIN, HIME, etc.) also provide similar functions -and can, if not available from the drop-down menu, be installed in another -part of the Mageia Control Center. See . -
- -
- diff --git a/docs/mcc-help/cs/logdrake.xml b/docs/mcc-help/cs/logdrake.xml deleted file mode 100644 index 297c180a..00000000 --- a/docs/mcc-help/cs/logdrake.xml +++ /dev/null @@ -1,111 +0,0 @@ -
- - Prohlížet a prohledávat systémové záznamy - - logdrake - - - - - - - - - This tool - You can start this tool from the command line, by typing logdrake as root. - is found in the Mageia -Control Center System tab, labelled "View and search system -logs". - - - -
- To do a search in the logs - - First, enter the key string you want to look for in the Matching field and/or the key string you want to -do not wish to see amongst the answers in the field -but not matching. Then select the file(s) -to search in the Choose file field. Optionally, it is -possible to limit the search to only one day. Select it in the Calendar, using the little arrows on each side of the -month and year, and check "Show only for the selected -day". At last, click on the search button -to see the results in the window called Content of the -file. It is possible to save the results in the .txt format by -clicking on the Save button. - - - The Mageia Tools Logs houses the logs from the Mageia -configuration tools such as the Mageia Control Center tools. These logs are -updated each time a configuration is modified. - -
- -
- To configure a mail alert - - Mail alert automatically checks the system load and -the services every hour and if necessary sends an e-mail to the configured -address. - - To configure this tool, click on the Mail -Alert button and then, in the next screen, on the -Configure the mail alert system drop down button. Here, all the -running services are displayed and you can choose which ones you want to -look watch. (See screenshot above). - - The following services can be watched : - - - - Služba Webmin - - - - Postfix Mail Server - - - - FTP Server - - - - Apache World Wide Web Server - - - - SSH Server - - - - Samba Server - - - - Xinetd Service - - - - BIND Domain Name Resolve - - - - - - - - - - In the next screen, select the Load value you consider -unacceptable. The load represents the demand to a process, a high load slows -the system down and a very high load may indicate that a process has gone -out of control. The default value is 3. We recommend setting the load value -to 3 times the number of processors. - - In the last screen, enter the Email address of the -person to be warned and the Email server to use (local -or on the Internet). -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/lsnetdrake.xml b/docs/mcc-help/cs/lsnetdrake.xml deleted file mode 100644 index 311e13b1..00000000 --- a/docs/mcc-help/cs/lsnetdrake.xml +++ /dev/null @@ -1,26 +0,0 @@ -
- - Display Available NFS And SMB Shares - lsnetdrake - - - This tool - You can start this tool from the command line, by typing lsnetdrake. - - can only be started and used -on the command line. - - This page hasn't been written yet for lack of resources. If you think you -can write this help, please contact the Documentation -team. Thanking you in advance. - -
diff --git a/docs/mcc-help/cs/lspcidrake.xml b/docs/mcc-help/cs/lspcidrake.xml deleted file mode 100644 index e71f01b2..00000000 --- a/docs/mcc-help/cs/lspcidrake.xml +++ /dev/null @@ -1,50 +0,0 @@ -
- - Display Your PCI, USB and PCMCIA Information - - lspcidrake - - - This tool - You can start this tool from the command line, by typing lspcidrake. - can only be started and used -on the command line. It will give some more information if used under root. - - lspcidrake gives the list of all the connected devices to the computer (USB, -PCI and PCMCIA) and the used drivers. It needs the ldetect and ldetect-lst -packages to work. - - - - - - - - With the -v option, lspcidrake adds the vendor and device identifications. - - lspcidrake often generates very long lists, so, to find an information, it -is often used in a pipeline with the grep command, like in these examples: - - Information about the graphic card; - - lspcidrake | grep VGA - - Information about the network - - lspcidrake | grep -i network - - -i to ignore case distinctions. - - In this screenshot below, you can see the action of the -v option for -lspcidrake and the -i option for grep. - - - - - - - - There is another tool that gives information about the hardware, it is -called dmidecode (under root) -
\ No newline at end of file diff --git a/docs/mcc-help/cs/mcc-boot.xml b/docs/mcc-help/cs/mcc-boot.xml deleted file mode 100644 index d29587a3..00000000 --- a/docs/mcc-help/cs/mcc-boot.xml +++ /dev/null @@ -1,41 +0,0 @@ - - -
- - Zavádění systému - - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika nástroji pro konfiguraci -zavaděče. Klikněte na odkaz níže a dozvíte se více. - - - Nastavit kroky zavádění systému - - - - - - - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-hardware.xml b/docs/mcc-help/cs/mcc-hardware.xml deleted file mode 100644 index 665f8120..00000000 --- a/docs/mcc-help/cs/mcc-hardware.xml +++ /dev/null @@ -1,102 +0,0 @@ - -
- - Hardware - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika nástroji pro konfiguraci -hardware. Klikněte na odkaz níže a dozvíte se více. - - - - - Spravovat hardware - - = Procházet a konfigurovat -hardware - - - - - - - - - - - Nastavit grafiku - - = Konfigurace efektů 3D -Desktopu - - - - - - - - - - - Nastavit myš a klávesnici - - - - - - - - - - - - - Nastavit tisk a skenování - - = Nastavení tiskáren, -fronty tiskových úloh, ... - - - - - - - - - - - Ostatní - - - - - - - - - - - - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-intro.xml b/docs/mcc-help/cs/mcc-intro.xml deleted file mode 100644 index f61bbd6c..00000000 --- a/docs/mcc-help/cs/mcc-intro.xml +++ /dev/null @@ -1,22 +0,0 @@ - - -
O příručce pro Ovládací centrum Mageia - - - Ovládací centrum Mageia (MCC) má na výběr v levém sloupci osm různých -záložek a pokud byl nainstalován balíček drakwizard dokonce záložek -deset. Každá z těchto záložek poskytuje odlišnou sadu nástrojů, které mohou -být vybrány v pravé části. - - Deset následujících kapitol je o těchto deseti záložkách a souvisejících -nástrojích. - -Poslední kapitola je o některých dalších nástrojích Mageia, které nemohou -být vybrány ze záložek v MCC. - - Názvy zde se budou mnohdy shodovat s názvy obrazovek nástrojů. - - Je zde také k dispozici vyhledávací lišta, ke které můžete přistupovat -kliknutím na záložku "Hledat" v levém sloupci. - -
diff --git a/docs/mcc-help/cs/mcc-localdisks.xml b/docs/mcc-help/cs/mcc-localdisks.xml deleted file mode 100644 index 471a17aa..00000000 --- a/docs/mcc-help/cs/mcc-localdisks.xml +++ /dev/null @@ -1,31 +0,0 @@ - - -
- - - Místní disky - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika nástroji pro správu a -sdílení místních disků. Klikněte na odkaz níže a dozvíte se více. - - Místní disky - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-network.xml b/docs/mcc-help/cs/mcc-network.xml deleted file mode 100644 index 08c96417..00000000 --- a/docs/mcc-help/cs/mcc-network.xml +++ /dev/null @@ -1,82 +0,0 @@ -
- - Síť a Internet - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika síťovými nástroji. Klikněte -na odkaz níže a dozvíte se více. - - - - - Spravovat síťová zařízení - - - - - - - - - - - - - - - - - - Přizpůsobit síť a nastavit její zabezpečení - - - - - - - - - - - - - - - - - - - - - - Ostatní - - - - - - - - - - - - - - - - - - - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/mcc-networkservices.xml b/docs/mcc-help/cs/mcc-networkservices.xml deleted file mode 100644 index d49bf8c3..00000000 --- a/docs/mcc-help/cs/mcc-networkservices.xml +++ /dev/null @@ -1,53 +0,0 @@ - -
- - Síťové služby - - - - - - - - - This screen and the one for Sharing are only visible if -the drakwizard package is installed. You can choose -between several tools to set up different servers. Click on a link below or -on to learn more. - - Síťové služby - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-networksharing.xml b/docs/mcc-help/cs/mcc-networksharing.xml deleted file mode 100644 index 800a660c..00000000 --- a/docs/mcc-help/cs/mcc-networksharing.xml +++ /dev/null @@ -1,44 +0,0 @@ - -
- - Sdílení v síti - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika nástroji pro sdílení disků -a adresářů. Klikněte na odkaz níže a dozvíte se více. - - - - Nastavit sdílení s Windows - - = Sdílejte disky a adresáře -se systémy Windows (SMB) - - - Nastavit sdílení pomocí NFS - - - - - Nastavit sdílení pomocí WebDAV - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-security.xml b/docs/mcc-help/cs/mcc-security.xml deleted file mode 100644 index 78e014fc..00000000 --- a/docs/mcc-help/cs/mcc-security.xml +++ /dev/null @@ -1,50 +0,0 @@ - - -
- - Bezpečnost - - - - - - - - - In this screen you can choose between several security tools. Click on a -link below to learn more. - - Bezpečnost - - = Configure system security, permissions -and audit - - - - - - - - - - - - - - - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-sharing.xml b/docs/mcc-help/cs/mcc-sharing.xml deleted file mode 100644 index dc21c7db..00000000 --- a/docs/mcc-help/cs/mcc-sharing.xml +++ /dev/null @@ -1,34 +0,0 @@ - -
- - Sdílení - - - - - - - - - This screen and the one for Network Services are only -visible if the drakwizard package is installed. You can -choose between several tools to set up different servers. Click on a link -below or on to learn more. - - Sdílení - - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/mcc-system.xml b/docs/mcc-help/cs/mcc-system.xml deleted file mode 100644 index 8c7e700b..00000000 --- a/docs/mcc-help/cs/mcc-system.xml +++ /dev/null @@ -1,76 +0,0 @@ -
- - Systém - - - - - - - Na této obrazovce si můžete vybrat mezi několika systémovými nástroji a -nástroji pro správu. Klikněte na odkaz níže a dozvíte se více. - - - - Spravovat systémové služby - - - - - - - - - - - - - - Lokalizace - - - - - - - - - - - Nástroje pro správu - - - - - - - - = Manage users on system - - - - - - - - - - - - - - - - - - - - - - - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/mgaapplet-config.xml b/docs/mcc-help/cs/mgaapplet-config.xml deleted file mode 100644 index d73cf40b..00000000 --- a/docs/mcc-help/cs/mgaapplet-config.xml +++ /dev/null @@ -1,34 +0,0 @@ -
- - Nastavit frekvenci aktualizací - - mgaapplet-config - - - - - - - - - This tool - You can start this tool from the command line, by typing mgaapplet-config as root. - is present in the Mageia -Control Center under the tab Software -management. It is also available by a right click / -Updates configuration on the red icon - - - - in the system tray. - - - - The first slider allows you to change how frequently Mageia will check for -updates and the second the delay after booting before the first check. The -check box gives you the option to be warned when a new Mageia release is -out. - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/mousedrake.xml b/docs/mcc-help/cs/mousedrake.xml deleted file mode 100644 index 51e87b65..00000000 --- a/docs/mcc-help/cs/mousedrake.xml +++ /dev/null @@ -1,26 +0,0 @@ -
- - Nastavit polohovací zařízení (myš, touchpad) - - mousedrake - - - - - - - - - This toolYou can start this tool from the command line, by typing mousedrake as root. is present in the Mageia -Control Center under the tab Hardware. - - As you must have a mouse to install Mageia, that one is already installed by -Drakinstall. This tool allows installation of another mouse. - - The mice are sorted by connection type and then by model. Select your mouse -and click on OK. Most of the time "Universal / Any -PS/2 & USB mice" is suitable for a recent mouse. The new mouse is -immediately taken into account. - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/msecgui.xml b/docs/mcc-help/cs/msecgui.xml deleted file mode 100644 index 214e805b..00000000 --- a/docs/mcc-help/cs/msecgui.xml +++ /dev/null @@ -1,358 +0,0 @@ -
- - MSEC: Zabezpečení a audit systému - - msecgui - - - - - - - - - - - - - -
- Presentation - - msecguiYou can start this tool from the command line, by typing msecgui as root. - is a graphic user interface for -msec that allows to configure your system security according to two -approaches: - - - - It sets the system behaviour, msec imposes modifications to the system to -make it more secure. - - - - It carries on periodic checks automatically on the system in order to warn -you if something seems dangerous. - - - - msec uses the concept of "security levels" which are intended to configure a -set of system permissions, which can be audited for changes or -enforcement. Several of them are proposed by Mageia, but you can define your -own customised security levels. -
- -
- Overview tab - - See the screenshot above - - The first tab takes up the list of the different security tools with a -button on the right side to configure them: - - - - Firewall, also found in the MCC / Security / Set up your personal firewall - - - - Updates, also found in MCC / Software Management / Update your system - - - - msec itself with some information: - - - - enabled or not - - - - the configured Base security level - - - - the date of the last Periodic checks and a button to see a detailed report -and another button to execute the checks just now. - - - - -
- -
- Security settings tab - - A click on the second tab or on the Security -Configure button leads to the same screen shown -below. - - - - - - - - -
- Basic security tab - - - Security levels: - - - After having checked the box Enable MSEC tool, this tab -allows you by a double click to choose the security level that appears then -in bold. If the box is not checked, the level « none » is applied. The -following levels are available: - - - - Level none. This level is intended if you -do not want to use msec to control system security, and prefer tuning it on -your own. It disables all security checks and puts no restrictions or -constraints on system configuration and settings. Please use this level only -if you are knowing what you are doing, as it would leave your system -vulnerable to attack. - - - - Level standard. This is the default -configuration when installed and is intended for casual users. It -constrains several system settings and executes daily security checks which -detect changes in system files, system accounts, and vulnerable directory -permissions. (This level is similar to levels 2 and 3 from past msec -versions). - - - - Level secure. This level is intended when -you want to ensure your system is secure, yet usable. It further restricts -system permissions and executes more periodic checks. Moreover, access to -the system is more restricted. (This level is similar to levels 4 (High) and -5 (Paranoid) from old msec versions). - - - - Besides those levels, different task-oriented security are also provided, -such as the fileserver , webserver and netbook levels. Such levels attempt to pre-configure -system security according to the most common use cases. - - - - The last two levels called audit_daily and -audit_weekly are not really security levels -but rather tools for periodic checks only. - - - - These levels are saved in -/etc/security/msec/level.<levelname>. You can define -your own customised security levels, saving them into specific files called -level.<levelname>, placed into the folder -/etc/security/msec/. This function is intended for -power users which require a customised or more secure system configuration. - - - Keep in mind that user-modified parameters take precedence over default -level settings. - - - - Security alerts: - - - If you check the box Send security alerts by email -to:, the security alerts generated by msec are going to be sent -by local e-mail to the security administrator named in the nearby field. You -can fill either a local user or a complete e-mail address (the local e-mail -and the e-mail manager must be set accordingly). At last, you can receive -the security alerts directly on your desktop. Check the relevant box to -enable it. - - - It is strongly advisable to enable the security alerts option in order to -immediately inform the security administrator of possible security -problems. If not, the administrator will have to regularly check the logs -files available in /var/log/security. - - Security options: - - Creating a customised level is not the only way to customise the computer -security, it is also possible to use the tabs presented here after to change -any option you want. Current configuration for msec is stored in -/etc/security/msec/security.conf. This file contains -the current security level name and the list of all the modifications done -to the options. -
- -
- System security tab - - This tab displays all the security options on the left side column, a -description in the centre column, and their current values on the right side -column. - - - - - - - - To modify an option, double click on it and a new window appears (see -screenshot below). It displays the option name, a short description, the -actual and default values, and a drop down list where the new value can be -selected. Click on the OK button to validate the -choice. - - - - - - - - - Do not forget when leaving msecgui to save definitively your configuration -using the menu File -> Save the configuration. If you -have changed the settings, msecgui allows you to preview the changes before -saving them. - - - - - - - -
- -
- Zabezpečení sítě - - This tab displays all the network options and works like the previous tab - - - - - - -
- -
- Periodic checks tab - - Periodic checks aim to inform the security administrator by means of -security alerts of all situations msec thinks potentially dangerous. - - This tab displays all the periodic checks done by msec and their frequency -if the box Enable periodic security checks is -checked. Changes are done like in the previous tabs. - - - - - - -
- -
- Exceptions tab - - Sometimes alert messages are due to well known and wanted situations. In -these cases they are useless and wasted time for the administrator. This tab -allows you to create as many exceptions as you want to avoid unwanted alert -messages. It is obviously empty at the first msec start. The screenshot -below shows four exceptions. - - - - - - - - To create an exception, click on the Add a rule -button - - - - - - - - Select the wanted periodic check in the drop down list called -Check and then, enter the -Exception in the text area. Adding an exception is -obviously not definitive, you can either delete it using the -Delete button of the Exceptions -tab or modify it with a double clicK. -
- -
- Oprávnění - This tab is intended for file and directory permissions checking and -enforcement. - Like for the security, msec owns different permissions levels (standard, -secure, ..), they are enabled accordingly with the chosen security -level. You can create your own customised permissions levels, saving them -into specific files called perm.<levelname> placed -into the folder /etc/security/msec/ . This function is -intended for power users which require a customised configuration. It is -also possible to use the tab presented here after to change any permission -you want. Current configuration is stored in -/etc/security/msec/perms.conf. This file contains the -list of all the modifications done to the permissions. - - - - - - Default permissions are visible as a list of rules (a rule per line). You -can see on the left side, the file or folder concerned by the rule, then the -owner, then the group and then the permissions given by the rule. If, for a -given rule: - - - the box Enforce is not checked, msec only checks if the -defined permissions for this rule are respected and sends an alert message -if not, but does not change anything. - - - - the box Enforce is checked, then msec will rule the -permissions respect at the first periodic check and overwrite the -permissions. - - For this to work, the option CHECK_PERMS in the Periodic check tab must be configured accordingly.To create a new rule, click on the Add a rule button -and fill the fields as shown in the example below. The joker * is allowed in -the File field. “current” means no modification. - - - - - - Click on the OK button to validate the choice and do -not forget when leaving to save definitively your configuration using the -menu File -> Save the configuration. If you have changed -the settings, msecgui allows you to preview the changes before saving them. - It is also possible to create or modify the rules by editing the -configuration file /etc/security/msec/perms.conf. - - Changes in the Permission tab (or directly -in the configuration file) are taken into account at the first periodic -check (see the option CHECK_PERMS in the Periodic -checks tab). If you want them to be taken immediately into -account, use the msecperms command in a console with root rights. You can -use before, the msecperms -p command to know the permissions that will be -changed by msecperms. - Do not forget that if you modify the permissions in a console or in a file -manager, for a file where the box Enforce is checked -in the Permissions tab , msecgui will write -the old permissions back after a while, accordingly to the configuration of -the options CHECK_PERMS and CHECK_PERMS_ENFORCE in the Periodic Checks tab . -
-
-
diff --git a/docs/mcc-help/cs/otherMageiaTools.xml b/docs/mcc-help/cs/otherMageiaTools.xml deleted file mode 100644 index d6c799b8..00000000 --- a/docs/mcc-help/cs/otherMageiaTools.xml +++ /dev/null @@ -1,42 +0,0 @@ - -
- - Other Mageia Tools - - - There are more Mageia tools than those that can be started in the Mageia -Control Center. Click on a link below to learn more, or continue reading the -next pages. - - - - drakbug - - - - - drakbug_report - - - - TO BE WRITTEN - - - - - - - And more tools? - - - - - - - - - - - - -
diff --git a/docs/mcc-help/cs/rpmdrake.xml b/docs/mcc-help/cs/rpmdrake.xml deleted file mode 100644 index a0f9b928..00000000 --- a/docs/mcc-help/cs/rpmdrake.xml +++ /dev/null @@ -1,251 +0,0 @@ -
- - - Software Management (Install and Remove Software) - - rpmdrake - - - - - - - - - - -
- Úvod do rpmdrake - - This tool - You can start this tool from the command line, by typing rpmdrake as root. - , also known as drakrpm, is a -program for installing, uninstalling and updating packages. It is the -graphical user interface of URPMI. At each start up, it will check online -package lists (called 'media') downloaded straight from Mageia's official -servers, and will show you each time the latest applications and packages -available for your computer. A filter system allows you to display only -certain types of packages: you may display only installed applications (by -default), or only available updates. You can also view only not installed -packages. You can also search by the name of a package, or in the summaries -of descriptions or in the full descriptions of packages or in the file names -included in the packages. - - To work, rpmdrake needs the repositories to be configured with . - - - During the installation, the configured repository is the medium used for -the installation, generally the DVD or CD. If you keep this medium, rpmdrake -will ask it each time you want to install a package, with this pop-up window -: - - - - If the above message annoys you -and you have a good internet connection without too strict download limit, -it is wise to remove that medium and replace it by online repositories -thanks to . - - Moreover, the online repositories are always up to date, contains much more -packages, and allow to update your installed packages. - -
- -
- The main parts of the screen - - - - - - - - - - - Package type filter: - - This filter allows you to display only certain types of packages. The first -time you start the manager, it only displays applications with a graphical -interface. You can display either all the packages and all their -dependencies and libraries or only package groups such as applications only, -updates only or backported packages from newer versions of Mageia. - - - The default filter setting is for new entrants to Linux or Mageia, who -probably do not want command line or specialist tools. Since you're reading -this documentation, you're obviously interested in improving your knowledge -of Mageia, so it is best to set this filter to "All". - - - - - Package state filter: - - - This filter allows you to view only the installed packages, only the -packages that are not installed or all of the packages, both installed and -not installed. - - - - Search mode: - - Click on this icon to search through the package names, through their -summaries, through their complete description or through the files included -in the packages. - - - - "Find" box: - - Enter here one or more key words. If you want to use more than one keyword -for searching use '|' between keywords, e.g. To search for "mplayer" and -"xine" at the same time type 'mplayer | xine'. - - - - Erase all: - - This icon can erase in one click all the key words entered in the "Find" box -. - - - - Categories list: - - This side bar groups all applications and packages into clear categories and -sub categories. - - - - Description panel: - - This panel displays the package's name, its summary and complete -description. It displays many useful elements about the selected package. It -can also show precise details about the package, the files included in the -package as well as a list of the last changes made by the maintainer. - - -
- -
- The status column - - Once you correctly set the filters, you can find your software either by -category (in area 6 above) or by name/summary/description using area 4. A -list of packages fulfilling your query and, don't forget, the chosen medium -is shown with different status markers according to whether each package is -installed/not installed/an update... To change this status, just check or -uncheck the box before the package name and click on -Apply. - - - - - <tgroup cols="2" align="left"> - <colspec align="center"/> - - <thead> - <row> - <entry align="center">Ikona</entry> - - <entry valign="middle" align="center">Legenda</entry> - </row> - </thead> - - <tbody> - <row> - <entry><mediaobject> - <imageobject> - <imagedata fileref="../rpmdrake2.png"/> - </imageobject> - </mediaobject></entry> - - <entry valign="middle">Tento balíček je již nainstalován</entry> - </row> - - <row> - <entry><mediaobject> - <imageobject> - <imagedata fileref="../rpmdrake3.png"/> - </imageobject> - </mediaobject></entry> - - <entry valign="middle">Tento balíček bude nainstalován</entry> - </row> - - <row> - <entry><mediaobject> - <imageobject> - <imagedata fileref="../rpmdrake4.png"/> - </imageobject> - </mediaobject></entry> - - <entry valign="middle">Tento balíček nelze změnit</entry> - </row> - - <row> - <entry><mediaobject> - <imageobject> - <imagedata fileref="../rpmdrake5.png"/> - </imageobject> - </mediaobject></entry> - - <entry valign="middle">Tento balíček je aktualizací</entry> - </row> - - <row> - <entry><mediaobject> - <imageobject> - <imagedata fileref="../rpmdrake6.png"/> - </imageobject> - </mediaobject></entry> - - <entry valign="middle">Tento balíček bude odinstalován</entry> - </row> - </tbody> - </tgroup> - </table></para> - - <para>Examples in the screenshot above:</para> - - <itemizedlist> - <listitem> - <para>If I uncheck digikam (the green arrow tell us it is installed), the status -icon will go red with an up arrow and it will be uninstalled when clicking -on <guibutton>Apply</guibutton>.</para> - </listitem> - </itemizedlist> - - <itemizedlist> - <listitem> - <para>If I check qdigidoc (which is not installed, see the status), the orange -with a down arrow status icon will appear and it will be installed when -clicking on <guibutton>Apply</guibutton>.</para> - </listitem> - </itemizedlist> - </section> - - <section> - <title>The dependencies - - - - - - - - - Some packages need other packages called dependencies in order to work. They -are for example libraries or tools. In this case, Rpmdrake displays an -information window allowing you to choose whether to accept the selected -dependencies, cancel the operation or get more information (see above). It -may also happen that various packages are able to provide the needed -library, in which case rpmdrake displays the list of alternatives with a -button to get more information and another button to choose which package to -install. - - \ No newline at end of file diff --git a/docs/mcc-help/cs/scannerdrake.xml b/docs/mcc-help/cs/scannerdrake.xml deleted file mode 100644 index 14163aa2..00000000 --- a/docs/mcc-help/cs/scannerdrake.xml +++ /dev/null @@ -1,259 +0,0 @@ - -
- - Nastavit skener - scannerdrake - - - - -
- - Instalace - - - This tool - You can start this tool from the command line, by typing -scannerdrake as root. - allows you to configure a -single scanner device or a multifunction device which includes scanning. It -also allows you to share local devices connected to this computer with a -remote computer or to access remote scanners. - - When you start this tool for the first time, you may get the following -message: - - "SANE packages need to be installed to use scanners - - Do you want to install the SANE packages?" - - Choose Yes to continue. It will install -scanner-gui and task-scanning if they are not yet -installed. - - - - - - - - If your scanner is identified correctly, so if in the above screen you see -the name of your scanner, the scanner is ready for use with, for instance, -XSane or Simple Scan. - - In that case, you might now want to want to configure the Scanner -sharing option. You can read about it in the . - - - However, if your scanner hasn't been correctly identified, and checking its -cable(s) and power switch and then pressing Search for new -scanners doesn't help, you'll need to press Add a -scanner manually. - - Choose the brand of your scanner in the list you see, then its type from the -list for that brand and click Ok - - - - - - - - - If you can't find your scanner in the list, then click -Cancel - - Please check whether your scanner is supported on the SANE: -Supported Devices page and ask for help in the forums. - - -
- - Choose port - - - - -
- - You can leave this setting to Auto-detect available -ports unless your scanner's interface is a parallel port. In that -case, select /dev/parport0 if you have only one. - - After clicking Ok, in most cases you will see a screen -similar to the one below. -If you don't get that screen, then please read the . - - - - - - -
- -
- - Scannersharing - - - - - - - - - Here you can choose whether the scanners connected to this machine should be -accessible by remote machines and by which remote machines. You can also -decide here whether scanners on remote machines should be made available on -this machine. - - Scanner sharing to hosts : name or IP address of hosts can be added or -deleted from the list of hosts allowed to access the local device(s), on -this computer. - - Usage of remote scanners : name or IP address of hosts can added or deleted -from the list of hosts which give access to a remote scanner. - - - - - - - - Scanner sharing to hosts: you can add host. - - - - - - - - Scanner sharing to hosts: specify which host(s) to add, or allow all remote -machines. - - - - - - - - "All remote machines" are allowed to access the local scanner. - - - - - - - - If the package saned is not yet installed, the tool -offers to do it. - - At the end, the tool will alter these files: - - /etc/sane.d/saned.conf - - /etc/sane.d/net.conf - - /etc/sane.d/dll.conf to add or comment the directive -"net" - - It will also configure saned and -xinetd to be started on boot. -
- -
- - Specifics - - - - - - Hewlett-Packard - - Most HP scanners are managed from HP Device Manager -(hplip) which also manages printers. In this case, this tool does not allow -you to configure it and invites you to use HP Device -Manager. - - - - Epson - - Drivers are available from this -page. When indicated, you must install the -iscan-data package first, then -iscan (in this order). It is possible that the -iscan package will generate a warning about a conflict -with sane. Users have reported that this warning can be -ignored. - - - -
- -
- - Extra installation steps - - - It is possible that after selecting a port for your scanner in the screen, you need to take one or more extra -steps to correctly configure your scanner. - - - - -In some cases, you're told the scanner needs its firmware to be uploaded -each time it is started. This tool allows you to load it into the device, -after you installed it on your system. In this screen you can install the -firmware from a CD or a Windows installation, or install the one you -downloaded from an Internet site of the vendor. - When your device's firmware needs to be loaded, it can take a long time at -each first usage, possibly more than one minute. So be patient. - - - -Also, you may get a screen telling you to adjust the -/etc/sane.d/"name_of_your_SANE_backend".conf file. - - - -Read those or other instructions you get carefully and if you don't know -what to do, feel free to ask for help in the forums. - - - - -
-
diff --git a/docs/mcc-help/cs/software-management.xml b/docs/mcc-help/cs/software-management.xml deleted file mode 100644 index 5d32a5c1..00000000 --- a/docs/mcc-help/cs/software-management.xml +++ /dev/null @@ -1,39 +0,0 @@ - -
- - Správa softwaru - - - - - - - - - Na této obrazovce si můžete vybrat mezi několika nástroji pro správu -softwaru. Pokud se chcete dozvědět více klikněte na některý z odkazů níže. - Správa softwaru - - - - - = Aktualizovat váš -systém - - - - - - = Nastavení zdrojů -software pro instalaci a aktualizaci - - - - - - - - - -
diff --git a/docs/mcc-help/cs/system-config-printer.xml b/docs/mcc-help/cs/system-config-printer.xml deleted file mode 100644 index 42bd5ca4..00000000 --- a/docs/mcc-help/cs/system-config-printer.xml +++ /dev/null @@ -1,341 +0,0 @@ -
- - - - - - - -Instalace a konfigurace tiskárny - - system-config-printer - - - - - - - - -
- Úvod - - Printing is managed on Mageia by a server named CUPS. It has its own configuration -interface which is accessible via an Internet browser, but Mageia -offers its own tool for installing printers called system-config-printer -which is shared with other distributions such as Fedora, Mandriva, Ubuntu -and openSUSE. - - You should enable the non-free repository before proceeding with the -installation, because some drivers may only be available in this way. - - Printer installation is carried out in the Hardware -section of the Mageia Control Centre. Select the Configure -printing and scanning tool - You can start this tool from the command line, by typing -system-config-printer. The root password will be asked -for. - . - - MCC bude žádat o instalaci dvou balíčků: - -
- task-printing-server - - task-printing-hp -
- - Pro pokračování je třeba akceptovat tuto instalaci. Závislosti mohou -potřebovat až 230MB. - - Chcete-li přidat tiskárnu, klepněte na tlačítko "Přidat tiskárnu". Systém se -bude snažit odhalit všechny tiskárny a porty které jsou k dispozici. Snímek -zobrazuje tiskárny připojené k paralelnímu portu. Pokud je zjištěna tiskárna -na USB portu, bude zobrazena na prvním řádku. Okno se také pokusí -nakonfigurovat síťové tiskárny. -
- -
- Automatically detected printer - - This usually refers to USB printers. The utility automatically finds the -name of the printer and displays it. Select the printer and then click -"Next". If there is a known driver associated for the printer, it will be -automatically installed. If there is more than one driver or no known -drivers, a window will ask you to select or furnish one, as explained in the -next paragraph. Continue with -
- -
- No automatically detected printer - - - - - - - - When you select a port, the system loads a driver list and displays a window -to select a driver. The choice can be made through one of the following -options. - - - - Výběr tiskárny z databáze - - - - - - provide PPD file - - - - - - search for a driver to download - - - - By selecting from the database, the window suggests a printer manufacturer -first, and then a device and a driver associated with it. If more than one -driver is suggested, select one which is recommended, unless you have -encountered some problems with that one before, in this case select the one -which know to work. -
- -
- Complete the installation process - - After the driver selection, a window requests some information which will -allow the system to designate and discover the printer. The first line is -the name under which the device will appear in applications in the list of -available printers. The installer then suggests printing a test page. After -this step, the printer is added and appears in the list of available -printers. -
- -
- Síťová tiskárna - - Síťové tiskárny jsou tiskárny, které jsou připojeny přímo ke kabelové nebo -bezdrátové síti, jsou připojeny k printserveru nebo jsou připojeny k jiné -pracovní stanice, která slouží jako printserver. - - - Often, it is better to configure the DHCP server to always associate a fixed -IP address with the printer's MAC-address. Of course that should be the same -as the IP address the printer of printserver is set to, if it has a fixed -one. - - - The printer's Mac-address is a serial number given to the printer or -printserver or computer it is attached to, that can be obtained from a -configuration page printed by the printer or which may be written on a label -on the printer or printserver. If your shared printer is attached to a -Mageia system, you can run ifconfig on it -as root to find the MAC-address. It is the sequence of numbers and letters -after "HWaddr". - - You can add your network printer by choosing the protocol it uses to talk to -your computer over the network. If you don't know which protocol to choose, -you can try the Network Printer - Find -Network Printer option in the Devices menu -and give the IP address of the printer in the box on the right, where it -says "host". - - If the tool recognises your printer or printserver, it will propose a -protocol and a queue, but you can choose a more appropriate one from the -list below it or give the correct queue name if it isn't in the list. - - Look in the documentation that came with your printer or printserver to find -which protocol(s) it supports and for possible specific queue names. -
- -
- Protokoly síťového tisku - - One current technique is one developed by Hewlett-Packard and known as -JetDirect. It allows access to a printer directly connected to the network -via an Ethernet port. You must know the IP-address at which the printer is -known on the network. This technique is also used inside some ADSL-routers -which contain an USB port to connect the printer. In this case, the -IP-address is that of the router. Note that the tool "Hp Device manager" can -manage dynamically configured IP-adress, setting an URI like -hp:/net/<name-of-the-printer> . In this case, fixed -IP-adress is not required. - - Choose the option AppSocket/HP JetDirect as the -protocol and set the address in Host:, do not change -the Port Number, unless you know that it needs to be -changed. After the selection of the protocol, the selection of the driver is -the same as above. - - - - - - - - The other protocols are: - - - - Internet Printing Protocol (ipp): a printer which can -be accessed on a TCP/IP network via the IPP protocol, for example a printer -connected to a station using CUPS. This protocol may also be used also by -some ADSL-routers. - - - - - - Internet Printing Protocol (https): the same as ipp, -but using http transport and with TLS secured protocol. The port has to be -defined. By default, the port 631 is used. - - - - - - Internet Printing Protocol (ipps): the same as ipp, but -with TLS secured protocol. - - - - - - LPD/LPR host or Printer: a printer which can be -accessed on a TCP/IP network via the LPD protocol, for example a printer -connected to a station using LPD. - - - - - - Windows printer via SAMBA: a printer connected to a -station running Windows or a SMB server and shared. - - - - The URI can also be added directly. Here are some examples on how to form -the URI: - - - - Appsocket - - socket://ip-address-or-hostname:port - - - - Internet Printing Protocol (IPP) - - ipp://ip-address-or-hostname:port-number/resource - - http://ip-address-or-hostname:port-number/resource - - - - Line Printer Daemon (LPD) Protocol - - lpd://username@ip-address-or-hostname/queue - - - - Additional information can be found in the CUPS -documentation. -
- -
- Device Properties - - You can access the properties of the device. The menu allows access to -parameters for the CUPS server. By default a CUPS server is launched on your -system, but you can specify a different one with the -Server | Connect... menu, -another window which gives access to the tuning of other specific parameters -of the server, following Server | -Settings. -
- -
- Troubleshoot - - You can find some information on occurring errors during printing by -inspecting /var/log/cups/error_log - - You can also access to a tool to diagnose problems using the -Help | Troubleshoot menu. -
- -
- Specifics - - It is possible that some drivers for specific printers are not available in -Mageia or are not functional. In this case, have a look at the openprinting site to -check if a driver for your device is available. If yes, check if the package -is already present in Mageia and in this case install it manually. Then, -redo the installation process to configure the printer. In all cases, report -the problem in bugzilla or on the forum if you are comfortable with this -tool and furnish the model and driver information and whether the printer -works or not after installation. Here are some sources to find other -up-to-date drivers or for more recent devices. - - Brother printers - - This -page give a list of drivers provided by Brother. Search the driver -for your device, download the rpm(s) and install. - - You should install Brother drivers before running the configuration utility. - - Hewlett-Packard printers and All in one -devices - - These devices use the hplip tool. It is installed automatically after the -detection or the selection of the printer. You can find other information -here. The -tool "HP Device Manager" is available in the System -menu. Also view configuration -for the management of the printer. - - A HP All in one device must be installed as a printer and the scanner -features will be added. Note that sometimes, the Xsane interface doesn't -allow to scan films or slides (the lighting slid can't operate). In this -case, it is possible to scan, using the standalone mode, and save the -picture on a memory card or USB stick inserted in the device. Afterwards, -open your favourite imaging software and load your picture from the memory -card which is appeared in the /media folder. - - Samsung colour printer - - For specific Samsung and Xerox colour printers, this site provides drivers for -the QPDL protocol. - - Epson printers and scanners - - Drivers for Epson printers are available from this -search page. For the scanner part, you must install the "iscan-data" -package first, then "iscan" (in this order). A iscan-plugin package can also -be available and is to install. Choose the rpm packages -according to your architecture. - - It is possible that the iscan package will generate a warning about a -conflict with sane. Users have reported that this warning can be ignored. - - Canon printers - - For Canon printers, it may be advisable to install a tool named turboprint -available here . -
-
\ No newline at end of file diff --git a/docs/mcc-help/cs/transfugdrake.xml b/docs/mcc-help/cs/transfugdrake.xml deleted file mode 100644 index 9cb60b76..00000000 --- a/docs/mcc-help/cs/transfugdrake.xml +++ /dev/null @@ -1,138 +0,0 @@ -
- - - - - - - - - - -Importovat dokumenty a nastavení z MS Windows - - transfugdrake - - - - - - - - - This tool - You can start this tool from the command line, by typing transfugdrake as root. - is found under the System tab in the Mageia Control Center labeled -Import Windows(TM) documents and settings - - The tool allows an administrator to import the user documents and settings -from a Windows 2000, Windows XP or Windows Vista -installation on the same computer as the Mageia installation. - - - Please note that all the changes will be applied by transfugdrake -immediately after pressing Next. - - - After starting transfugdrake you will see the first wizard page with some -explanation about the tool and import options. - - As soon as you read and understand the instructions, press the -Next button. This should run a detection of -Windows installation. - - When the detection step is complete you will see a page which allows you to -choose accounts in Windows and -Mageia for the import procedure. It is possible to choose other user account -than yours own. - - - - - - - - - Please take into account that due to migrate-assistant (the backend of -transfugdrake) limitations Windows -user account names with special symbols can be displayed incorrectly. - - - - Migration may take some time depending on the size of the document folders. - - - - Some Windows applications -(especially drivers) may create user accounts for different purposes. For -example, NVidia drivers in Windowsare updated using -UpdatusUser. Please do not use such accounts for the -import purposes. - - - When you finished with the accounts selection press -Next button. The next page is used to select a method -to import documents: - - - - - - - - Transfugdrake is designed to import Windows data from My -Documents, My Music and My -Pictures folders. It is possible to skip import by selecting the -appropriate item in this window. - - When you finished with the document import method choosing press -Next button. The next page is used to select a method -to import bookmarks: - - - - - - - - Transfugdrake can import Internet Explorer and -Mozilla Firefox bookmarks into the bookmarks of Mageia -Mozilla Firefox instance. - - Choose the preferred import option and press the Next -button. - - - - -The next page allows you to import desktop background: - - - - - - - - Choose the preferred option and press the Next -button. - - The last page of wizard shows some congratulation message. Just press the -Finish button. - - - - - - -
\ No newline at end of file diff --git a/docs/mcc-help/cs/userdrake.xml b/docs/mcc-help/cs/userdrake.xml deleted file mode 100644 index d19dcd9e..00000000 --- a/docs/mcc-help/cs/userdrake.xml +++ /dev/null @@ -1,154 +0,0 @@ -
- - - - - - - - - - - - - -Uživatelé a skupiny - - userdrake - - - - - - - - - This tool - You can start this tool from the command line, by typing userdrake as root. - is found under the System tab in the Mageia Control Center labelled -"Manage users on system" - - The tool allows an administrator to manage the users and the groups, this -means to add or delete a user or group and to modify user and group settings -(ID, shell, ...) - - When userdrake is opened, all the users existing on the system are listed in -the Users tab, and all the groups in the -Groups tab. Both tabs operate the same way. - - 1 Přidat uživatele - - This button opens a new window with all fields shown empty: - - - - - - - - The field Full Name is intended for the -entry of a family name and first name, but it is possible to write anything -or nothing as well! - - Login is the only required field. - - Setting a Password is highly -recommended. There is a little shield on the right, if it is red, the -password is weak, too short or is too similar to the login name. You should -use figures, lower and upper case characters, punctuation marks, etc. The -shield will turn orange and then green as the password strength improves. - - Confirm Password field is there to ensure -you entered what you intended to. - - Login Shell is a drop down list that allows -you to change the shell used by the user you are adding, the options are -Bash, Dash and Sh. - - Create a private group for the user, if -checked will automatically create a group with the same name and the new -user as the only member (this may be edited). - - The other options should be obvious. The new user is created immediately -after you click on OK. - - 2 Přidat skupinu - - You only need to enter the new group name, and if required, the specific -group ID. - - 3 Upravit (vybraného uživatele) - - User Data: Allows you to modify all the data given -for the user at creation (the ID can't be changed). - - Account Info: - - - - - - - - The first option is for setting an expiration date for the account. -Connection is impossible after this date. This is useful for temporary -accounts. - - The second option is to lock the account, connection is impossible as long -as the account is locked. - - It is also possible to change the icon. - - Password Info: Allows you to set an -expiration date for the password, this forces the user to change his -password periodically. - - - - - - - - Group: Here you can select the groups that -the user is a member of. - - - If you are modifying a connected user account, modifications will not be -effective until his/her next login. - - - 4 Upravit (s vybranou skupinou) - - Group Data: Allows you to modify the group -name. - - Group Users: Here you can select the users -who are members of the group - - 5 Smazat - - Select a user or a group and click on Delete to remove it. For a user, a window appears to -ask if home directory and mailbox must also be deleted. If a private group -has been created for the user, it will be deleted as well. - - - It is possible to delete a group which is not empty. - - - 6 Obnovit - - The User database can be changed outside of Userdrake. Click on this icon to -refresh the display. - - 7 Účet hosta - - guest is a special account. It is intended -to give somebody temporary access to the system with total security. Login -is xguest, there is no password, and it is impossible to make modifications -to the system from this account. The personal directories are deleted at the -end of the session. This account is enabled by default, to disable it, click -in the menu on Actions -> Uninstall guest account. -
\ No newline at end of file -- cgit v1.2.1