From a85470f894217d2a0ef0db0a614929668967519f Mon Sep 17 00:00:00 2001
From: Yuri Chornoivan <yurchor@ukr.net>
Date: Sun, 8 Feb 2015 13:40:34 +0200
Subject: Update Czech translation from Tx

---
 docs/mcc-help/cs/drakboot--boot.xml | 117 ++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 docs/mcc-help/cs/drakboot--boot.xml

(limited to 'docs/mcc-help/cs/drakboot--boot.xml')

diff --git a/docs/mcc-help/cs/drakboot--boot.xml b/docs/mcc-help/cs/drakboot--boot.xml
new file mode 100644
index 00000000..4c5977d9
--- /dev/null
+++ b/docs/mcc-help/cs/drakboot--boot.xml
@@ -0,0 +1,117 @@
+<?xml version='1.0' encoding='utf-8'?><section xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/2000/svg" xmlns:ns3="http://www.w3.org/1999/xhtml" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns="http://docbook.org/ns/docbook" version="5.0" xml:lang="cs" xml:id="drakboot--boot">
+  <info>
+    <title xml:id="drakboot--boot-ti1">Nastavit způsob zavedení systému</title>
+
+    <subtitle>drakboot --boot</subtitle>
+  </info>
+
+  <mediaobject>
+    <imageobject>
+      <imagedata revision="1" fileref="drakboot--boot.png" align="center" xml:id="drakboot--boot-im1" format="PNG"/>
+    </imageobject>
+  </mediaobject>
+
+  <para>this tool<footnote>
+      <para>You can start this tool from the command line, by typing <emphasis
+role="bold">drakboot --boot</emphasis> as root.</para>
+    </footnote> allows you to configure the
+boot options (choice of the bootloader, set a password, the default boot,
+etc.)</para>
+
+  <para>It is found under the Boot tab in the Mageia Control Center labelled "Set up
+boot system".</para>
+
+  <warning>
+    <para>Don't use this tool if you don't know exactly what you are doing.  Changing
+some settings may prevent your machine from booting again !</para>
+  </warning>
+
+  <para>In the first part, called <guilabel>Bootloader</guilabel>, it is possible to
+choose which <guibutton>Bootloader to use</guibutton>, Grub or Lilo, and
+with a graphical or a text menu. It is just a question of taste, there are
+no other consequences. You can also set the <guibutton>Boot
+device</guibutton>, don't change anything here unless you are an expert. The
+boot device is where the bootloader is installed and any modification can
+prevent you machine from booting.</para>
+
+  <para>In the second part, called <guilabel>Main options</guilabel>, you can set
+the <guibutton>Delay before booting default image</guibutton>, in
+seconds. During this delay, grub or Lilo will display the list of available
+operating systems, prompting you to make your choice, if no selection is
+made, the bootloader will boot the default one once the delay elapses.</para>
+
+  <para>In the third and last part, called <guibutton>Security</guibutton>, it is
+possible to set a password.</para>
+
+  <para>The <guibutton>Advanced</guibutton> button gives some extra options.</para>
+
+  <para><guibutton>Enable ACPI:</guibutton></para>
+
+  <para>ACPI (Advanced Configuration and Power Interface) is a standard for the
+power management. It can save energy by stopping unused devices, this was
+the method used before APM. Check this box if your hardware is ACPI
+compatible.</para>
+
+  <para><guibutton>Enable SMP:</guibutton></para>
+
+  <para>SMP stands for Symmetric Multi Processors, it's an architecture for
+multicore processors.</para>
+
+  <note>
+    <para>If you have a processor with HyperThreading, Mageia will see it as a dual
+processor and enable SMP.</para>
+  </note>
+
+  <para><guibutton>Enable APIC</guibutton> and <guibutton>Enable Local
+APIC:</guibutton></para>
+
+  <para>APIC stands for Advanced Programmable Interrupt Controller. There are two
+components in the Intel APIC system, the local APIC (LAPIC) and the I/O
+APIC. This one routes the interrupts it receives them from peripheral buses
+to one or more local APICs that are in the processor. It is really useful
+for multi-processor systems. Some computers have problems with the APIC
+system which can cause freezes or incorrect device detection (error message
+"spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local
+APIC.</para>
+
+  <mediaobject>
+    <imageobject>
+      <imagedata fileref="drakboot1.png"/>
+    </imageobject>
+  </mediaobject>
+
+  <para>In the <guibutton>Next</guibutton> screen, you can see the list of all the
+available entries at boot time. The default one is asterisked. To change the
+order of the menu entries, click on the up or down arrows to move the
+selected item. If you click on the <guibutton>Add</guibutton> or
+<guibutton>Modify </guibutton>buttons, a new window appears to add a new
+entry in the Grub menu or to modify an existing one. You need to be familiar
+with Lilo or Grub to be able to use these tools.</para>
+
+  <mediaobject>
+    <imageobject>
+      <imagedata fileref="drakboot2.png"/>
+    </imageobject>
+  </mediaobject>
+
+  <para>The <guilabel>Label</guilabel> field is freeform, write here what you want
+to be displayed in the menu. It matches the Grub command "title". For
+example: Mageia3.</para>
+
+  <para>The <guilabel>Image</guilabel> field contains the kernel name. It matches
+the Grub command "kernel". For example /boot/vmlinuz.</para>
+
+  <para>The <guilabel>Root</guilabel> field contains the device name where the
+kernel is stored. It matches the Grub command "root". For example (hd0,1).</para>
+
+  <para>The <guilabel>Append</guilabel> field contains the options to be given to
+the kernel at boot time.</para>
+
+  <para>If the box <guilabel>Default</guilabel> is checked, Grub will boot this
+entry by default.</para>
+
+  <para>In the extra screen called <guilabel>Advanced</guilabel>, it is possible to
+choose the <guilabel>Video mode</guilabel>, an <guilabel>initrd</guilabel>
+file and a <xref linkend="draknetprofile"></xref> in the drop-down lists.</para>
+
+</section>
\ No newline at end of file
-- 
cgit v1.2.1