From a85470f894217d2a0ef0db0a614929668967519f Mon Sep 17 00:00:00 2001 From: Yuri Chornoivan Date: Sun, 8 Feb 2015 13:40:34 +0200 Subject: Update Czech translation from Tx --- docs/installer/sl/DrakX-cover.xml | 154 ++++++++++ docs/installer/sl/DrakX.xml | 135 +++++++++ docs/installer/sl/SelectAndUseISOs2.xml | 415 ++++++++++++++++++++++++++ docs/installer/sl/acceptLicense.xml | 86 ++++++ docs/installer/sl/addUser.xml | 159 ++++++++++ docs/installer/sl/add_supplemental_media.xml | 45 +++ docs/installer/sl/ask_mntpoint_s.xml | 85 ++++++ docs/installer/sl/chooseDesktop.xml | 33 ++ docs/installer/sl/choosePackageGroups.xml | 40 +++ docs/installer/sl/choosePackagesTree.xml | 23 ++ docs/installer/sl/configureServices.xml | 40 +++ docs/installer/sl/configureTimezoneUTC.xml | 37 +++ docs/installer/sl/configureX_card_list.xml | 59 ++++ docs/installer/sl/configureX_chooser.xml | 64 ++++ docs/installer/sl/configureX_monitor.xml | 83 ++++++ docs/installer/sl/diskdrake.xml | 61 ++++ docs/installer/sl/doPartitionDisks.xml | 117 ++++++++ docs/installer/sl/exitInstall.xml | 38 +++ docs/installer/sl/formatPartitions.xml | 43 +++ docs/installer/sl/installUpdates.xml | 31 ++ docs/installer/sl/installer.xml | 253 ++++++++++++++++ docs/installer/sl/media_selection.xml | 46 +++ docs/installer/sl/minimal-install.xml | 27 ++ docs/installer/sl/misc-params.xml | 210 +++++++++++++ docs/installer/sl/resizeFATChoose.xml | 33 ++ docs/installer/sl/securityLevel.xml | 32 ++ docs/installer/sl/selectCountry.xml | 63 ++++ docs/installer/sl/selectInstallClass.xml | 74 +++++ docs/installer/sl/selectKeyboard.xml | 56 ++++ docs/installer/sl/selectLanguage.xml | 67 +++++ docs/installer/sl/selectMouse.xml | 31 ++ docs/installer/sl/setupBootloader.xml | 89 ++++++ docs/installer/sl/setupBootloaderAddEntry.xml | 39 +++ docs/installer/sl/setupSCSI.xml | 45 +++ docs/installer/sl/soundConfig.xml | 52 ++++ docs/installer/sl/takeOverHdConfirm.xml | 30 ++ 36 files changed, 2895 insertions(+) create mode 100644 docs/installer/sl/DrakX-cover.xml create mode 100644 docs/installer/sl/DrakX.xml create mode 100644 docs/installer/sl/SelectAndUseISOs2.xml create mode 100644 docs/installer/sl/acceptLicense.xml create mode 100644 docs/installer/sl/addUser.xml create mode 100644 docs/installer/sl/add_supplemental_media.xml create mode 100644 docs/installer/sl/ask_mntpoint_s.xml create mode 100644 docs/installer/sl/chooseDesktop.xml create mode 100644 docs/installer/sl/choosePackageGroups.xml create mode 100644 docs/installer/sl/choosePackagesTree.xml create mode 100644 docs/installer/sl/configureServices.xml create mode 100644 docs/installer/sl/configureTimezoneUTC.xml create mode 100644 docs/installer/sl/configureX_card_list.xml create mode 100644 docs/installer/sl/configureX_chooser.xml create mode 100644 docs/installer/sl/configureX_monitor.xml create mode 100644 docs/installer/sl/diskdrake.xml create mode 100644 docs/installer/sl/doPartitionDisks.xml create mode 100644 docs/installer/sl/exitInstall.xml create mode 100644 docs/installer/sl/formatPartitions.xml create mode 100644 docs/installer/sl/installUpdates.xml create mode 100644 docs/installer/sl/installer.xml create mode 100644 docs/installer/sl/media_selection.xml create mode 100644 docs/installer/sl/minimal-install.xml create mode 100644 docs/installer/sl/misc-params.xml create mode 100644 docs/installer/sl/resizeFATChoose.xml create mode 100644 docs/installer/sl/securityLevel.xml create mode 100644 docs/installer/sl/selectCountry.xml create mode 100644 docs/installer/sl/selectInstallClass.xml create mode 100644 docs/installer/sl/selectKeyboard.xml create mode 100644 docs/installer/sl/selectLanguage.xml create mode 100644 docs/installer/sl/selectMouse.xml create mode 100644 docs/installer/sl/setupBootloader.xml create mode 100644 docs/installer/sl/setupBootloaderAddEntry.xml create mode 100644 docs/installer/sl/setupSCSI.xml create mode 100644 docs/installer/sl/soundConfig.xml create mode 100644 docs/installer/sl/takeOverHdConfirm.xml (limited to 'docs/installer/sl') diff --git a/docs/installer/sl/DrakX-cover.xml b/docs/installer/sl/DrakX-cover.xml new file mode 100644 index 00000000..b5e35f0a --- /dev/null +++ b/docs/installer/sl/DrakX-cover.xml @@ -0,0 +1,154 @@ + + + + + Namestitev s programom DrakX + Mageia.org + + + Februar 2014 + Mageia 4 + + + + The Official Documentation for Mageia + + + + Namestitev s programom DrakX + Mageia.org + + + Februar 2014 + Mageia 4 + + + + + +
+ + + + + + + + + + + + + No one will see all the installer screens that you see in this manual. Which +screens you will see, depends on your hardware and the choices you make +while installing. + + + The texts and screenshots in this manual are available under the CC BY-SA +3.0 license http://creativecommons.org/licenses/by-sa/3.0/. + + This manual was produced with the help of the Calenco CMS developed by NeoDoc. + + It was written by volunteers in their free time. Please contact Documentation +Team, if you would like to help improve this manual. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ diff --git a/docs/installer/sl/DrakX.xml b/docs/installer/sl/DrakX.xml new file mode 100644 index 00000000..be2e02f5 --- /dev/null +++ b/docs/installer/sl/DrakX.xml @@ -0,0 +1,135 @@ + +
+ + + + + + + + + Namestitev s programom DrakX + + + + No one will see all the installer screens that you see in this manual. Which +screens you will see, depends on your hardware and the choices you make +while installing. + + + The texts and screenshots in this manual are available under the CC BY-SA +3.0 license http://creativecommons.org/licenses/by-sa/3.0/. + + This manual was produced with the help of the Calenco CMS developed by NeoDoc. + + It was written by volunteers in their free time. Please contact Documentation +Team, if you would like to help improve this manual. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
diff --git a/docs/installer/sl/SelectAndUseISOs2.xml b/docs/installer/sl/SelectAndUseISOs2.xml new file mode 100644 index 00000000..031eebf4 --- /dev/null +++ b/docs/installer/sl/SelectAndUseISOs2.xml @@ -0,0 +1,415 @@ +
+ + + +Select and use ISOs + + +
+ Media + +
+ Definition + + Here, a medium (plural: media) is an ISO image file that allows you to +install and/or update Mageia and by extension any physical support the ISO +file is copied to. + + You can find them here. +
+ +
+ Classical installation media + +
+ Common features + + + + These ISOs use the traditional installer called drakx. + + + + They are able to make a clean install or an update from previous releases. + + +
+ +
+ DVD + + + + Different media for architecture 32 or 64 bits. + + + + Some tools are available in the Welcome screen: Rescue System, Memory Test, +Hardware Detection Tool. + + + + Each DVD contains many available desktop environments and languages. + + + + You'll be given the choice during the installation to add non free software. + + +
+ +
+ DVD dual arch + + + + Both architectures are present on the same medium, the choice is made +automatically according to the detected CPU. + + + + Uses Xfce desktop only. + + + + Not all languages are available. (be, bg, ca, de, en, es, fr, it, mk, pl, +pt, ru, sv, uk) TO BE CHECKED! + + + + It contains non free software. + + +
+
+ +
+ Live media + +
+ Common features + + + + Can be used to preview the distribution without installing it on a HDD, and +optionally install Mageia on to your HDD. + + + + + Each ISO contains only one desktop environment (KDE or GNOME). + + + + Different media for 32 or 64 bit architectures. + + + + Live ISOs can only be used to create clean +installations, they cannot be used to upgrade from previous +releases. + + + + They contain non free software. + + +
+ +
+ Live CD KDE + + + + KDE desktop environment only. + + + + English language only. + + + + 32 bit only. + + +
+ +
+ Live CD GNOME + + + + GNOME desktop environment only. + + + + English language only. + + + + 32 bit only. + + +
+ +
+ Live DVD KDE + + + + KDE desktop environment only. + + + + All languages are present. + + + + Different media for 32 or 64 bit architectures. + + +
+ +
+ Live DVD GNOME + + + + GNOME desktop environment only. + + + + All languages are present. + + + + Different media for 32 or 64 bit architectures. + + +
+
+ +
+ Boot-only CD media + +
+ Common features + + + + Each one is a small image that contains no more than that which is needed to +start the drakx installer and find drakx-installer-stage2 and other packages +that are needed to continue and complete the install. These packages may be +on the PC hard disk, on a local drive, on a local network or on the +Internet. + + + + These media are very light (less than 100 MB) and are convenient when +bandwidth is too low to download a full DVD, a PC without a DVD drive or a +PC that can't boot from a USB stick. + + + + Different media for 32 or 64 bit architectures. + + + + English language only. + + +
+ +
+ boot.iso + + + + Contains only free software, for those people who refuse to use non-free +software. + + +
+ +
+ boot-nonfree.iso + + + + Contains non-free software (mostly drivers, codecs...) for people who need +it. + + +
+
+
+ +
+ Downloading and Checking Media + +
+ Downloading + + Once you have chosen your ISO file, you can download it using either http or +BitTorrent. In both cases, a window gives you some information, such as the +mirror in use and the possibility to change if the bandwidth is to low. If +http is chosen, you may also see something like + + + + + + md5sum and sha1sum are tools to check the ISO integrity. Use only one of +them. Both hexadecimal numbers have been calculated by an algorithm from the +file to be downloaded. When you ask these algorithms to recalculate this +number from your downloaded file, either you have the same number and your +downloaded file is correct, or the number is different and you have a +failure. A failure infers that you should retry the download.Then this +window appears: + + + + + Check the radio button Save File. +
+ +
+ Checking the downloaded media integrity + + Open a console, no need to be root, and: + + - To use md5sum, type: [sam@localhost]$ md5sum +path/to/the/image/file.iso. + + - To use sha1sum, type: [sam@localhost]$ sha1sum +path/to/the/image/file.iso. + + and compare the obtained number on your computer (you may have to wait for a +while) with the number given by Mageia. Example: + + + + + + +
+
+ +
+ Burn or dump the ISO + + The checked ISO can now be burned to a CD or DVD or dumped to a USB +stick. These operations are not a simple copy and aim to make a boot-able +medium. + +
+ Burning the ISO to a CD/DVD + + Use whatever burner you wish but ensure the burning device is set correctly +to burn an image, burn data or files is not +correct. There is more information in the Mageia +wiki. +
+ +
+ Dump the ISO to a USB stick + + All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick +and then use it to boot and install the system. + + + "dumping" an image onto a flash device destroys any previous file-system on +the device; any other data will be lost and the partition capacity will be +reduced to the image size. + + + To recover the original capacity, you must re-format the USB stick. + +
+ Using Mageia + + You can use a graphical tool like IsoDumper + + You can also use the dd tool in a console: + + + + Open a console + + + + Become root with the command su - (don't forget the +final '-' ) + + + + + + + + Plug your USB stick (do not mount it, this also means do not open any +application or file manager that could access or read it) + + + + Enter the command fdisk -l + + + + + + + + Find the device name for your USB stick (by its size), for example /dev/sdb +in the screenshot above, it is a 8Go USB stick. + + + + Enter the command: # dd if=path/to/the/ISO/file of=/dev/sdX +bs=1M + + Where X=your device name eg: /dev/sdc + Example: # dd if=/home/user/Downloads/Mageia-4-x86_64-DVD.iso +of=/dev/sdb bs=1M + + + + Enter the command: # sync + + + + Unplug your USB stick, it is done + + +
+ +
+ Using Windows + + You could try: + + - Rufus + + - Win32 +Disk Imager + + +
+
+
+ +
+ Mageia Installation + + This step is detailed in the +Mageia documentation. + + More information is available in the Mageia +wiki. +
+ +
diff --git a/docs/installer/sl/acceptLicense.xml b/docs/installer/sl/acceptLicense.xml new file mode 100644 index 00000000..701bff13 --- /dev/null +++ b/docs/installer/sl/acceptLicense.xml @@ -0,0 +1,86 @@ + +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + +Licenčna pogodba in opombe ob izdaji + + + + + +
+ + Licenčna pogodba + + + Pred namestitvijo Mageje pozorno preberite +licenčne pogoje. + + Ti licenčni pogoji se nanašajo na celotno distribucijo +Mageia. Pred nadaljevanjem jih je potrebno +sprejeti. + + Za sprejem preprosto označite Sprejmem in kliknite +gumb Naprej. + + Zahvaljujemo se za vaš ogled tudi če se odločite, da teh pogojev ne boste +sprejeli. S klikom na gumb Izhod se bo vaš računalnik +ponovno zagnal. + + + +
+ +
+ + + Opombe ob izdaji + + + + + Za ogled novosti te izdaje Mageje kliknite gumb +Opombe ob izdaji. +
+
diff --git a/docs/installer/sl/addUser.xml b/docs/installer/sl/addUser.xml new file mode 100644 index 00000000..bdbe5084 --- /dev/null +++ b/docs/installer/sl/addUser.xml @@ -0,0 +1,159 @@ +
+ + + User and Superuser Management + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + Nastavite geslo skrbnika (uporabnika root): + + + It is advisable for all Mageia installations to +set a superuser or administrator's password, usually called the +root password in Linux. As you type a password into the +top box the colour of its shield will change from red to yellow to green +depending on the strength of the password. A green shield shows you are +using a strong password. You need to repeat the same password in the box +just below the first password box, this checks that you have not mistyped +the first password by comparing them. + + + All passwords are case sensitive, it is best to use a mixture of letters +(upper and lower case), numbers and other characters in a password. + +
+ +
+ + Dodajte uporabnika + + + Add a user here. A user has fewer rights than the superuser (root), but +enough to surf the internet, use office applications or play games and +anything else the average user does with his computer + + + + Icon: if you click on this button it will change the +users icon. + + + + Real Name: Insert the users real name into this text +box. + + + + Login Name: Here you enter the user login name or let +drakx use a version of the users real name. The login name is case +sensitive. + + + + Password: In this text box you should type in the user +password. There is a shield at the end of the text box that indicates the +strength of the password. (See also ) + + + + Password (again): Retype the user password into this +text box and drakx will check you have the same password in each of the user +password text boxes. + + + + + Any user you add while installing Mageia, will have a world readable (but +write protected) home directory. + + However, while using your new install, any user you add in MCC - +System - Manage users on system will have a home directory that +is both read and write protected. + + If you don't want a world readable home directory for anyone, it is advised +to only add a temporary user now and to add the real one(s) after reboot. + + If you prefer world readable home directories, you might want to add all +extra needed users in the Configuration - Summary step +during the install. Choose User management. + + Dovoljenje dostopa lahko spremenite tudi po namestitvi + + +
+ +
+ + Advanced User Management + + + If the advanced button is clicked you are offered a +screen that allows you to edit the settings for the user you are +adding. Additionally, you can disable or enable a guest account. + + + Anything a guest with a default rbash guest account +saves to his /home directory will be erased when he logs out. The guest +should save his important files to a USB key. + + + + + Enable guest account: Here you can enable or disable a +guest account. The guest account allows a guest to log into and use the PC, +but he has more restricted access than normal users. + + + + Shell: This drop down list allows you to change the +shell used by the user you are adding in the previous screen, options are +Bash, Dash and Sh + + + + User ID: Here you can set the user ID for the user you +are adding in the previous screen. This is a number. Leave it blank unless +you know what you are doing. + + + + Group ID: This lets you set the group ID. Also a +number, usually the same one as for the user. Leave it blank unless you know +what you are doing. + + +
+
\ No newline at end of file diff --git a/docs/installer/sl/add_supplemental_media.xml b/docs/installer/sl/add_supplemental_media.xml new file mode 100644 index 00000000..0d9349aa --- /dev/null +++ b/docs/installer/sl/add_supplemental_media.xml @@ -0,0 +1,45 @@ + +
+ + Izbira virov (nastavitev dodatnih virov namestitve) + + + + + + + + + + + + + This screen gives you the list of already recognized repositories. You can +add other sources for packages, like an optical disc or a remote source. The +source selection determines which packages will be available for selection +during the next steps. + + For a network source, there are two steps to follow: + + + + Choosing and activation of the network, if not already up. + + + + Selecting a mirror or specifying a URL (very first entry). By selecting a +mirror, you have access to the selection of all repositories managed by +Mageia, like the Nonfree , the Tainted repositories and the Updates. With +the URL, you can designate a specific repository or your own NFS +installation. + + +
diff --git a/docs/installer/sl/ask_mntpoint_s.xml b/docs/installer/sl/ask_mntpoint_s.xml new file mode 100644 index 00000000..9713d740 --- /dev/null +++ b/docs/installer/sl/ask_mntpoint_s.xml @@ -0,0 +1,85 @@ + +
+ + + Izberite priklopne točke + + + + + + + + + + + + + + + + + + + + + + + + + + Here you see the Linux partitions that have been found on your computer. If +you don't agree with the DrakX suggestions, you +can change the mount points. + + + If you change anything, make sure you still have a / +(root) partition. + + + + + Every partition is shown as follows: "Device" ("Capacity", "Mount point", +"Type"). + + + + "Device", is made up of: "hard drive", ["hard drive number"(letter)], +"partition number" (for example, "sda5"). + + + + + If you have many partitions, you can choose many different mount points from +the drop down menu, such as /, /home +and /var. You can even make your own mount points, for +instance /video for a partition where you want to store +your films, or /cauldron-home for the +/home partition of a cauldron install. + + + + For partitions you don't need to have access to, you can leave the mount +point field blank. + + + + + Choose Previous if you are not sure what to choose, +and then tick Custom disk partitioning. In the screen +that follows, you can click on a partition to see its type and size. + + + If you are sure the mount points are correct, click on +Next, and choose whether you only want to format the +partition(s) DrakX suggests, or more. +
diff --git a/docs/installer/sl/chooseDesktop.xml b/docs/installer/sl/chooseDesktop.xml new file mode 100644 index 00000000..6f1eec7e --- /dev/null +++ b/docs/installer/sl/chooseDesktop.xml @@ -0,0 +1,33 @@ +
+ + + + + Izbira namizja + + + + + + Depending on your selection here, you may be offered further screens to fine +tune your choice. + + After the selection step(s), you will see a slide show during package +installation. The slide show can be disabled by pressing the +Details button + + + + + + + Choose whether you prefer to use the KDE or +Gnome desktop environment. Both come with a full +set of useful applications and tools. Tick Custom if +you want to use neither or both, or if you want something other than the +default software choices for these desktop environments. The +LXDE desktop is lighter than the previous two, +sporting less eye candy and fewer packages installed by default. +
+ diff --git a/docs/installer/sl/choosePackageGroups.xml b/docs/installer/sl/choosePackageGroups.xml new file mode 100644 index 00000000..328f2d66 --- /dev/null +++ b/docs/installer/sl/choosePackageGroups.xml @@ -0,0 +1,40 @@ +
+ + + Izbira skupin paketov + + + + + + + + + Packages have been sorted into groups, to make choosing what you need on +your system a lot easier. The groups are fairly self explanatory, however +more information about the content of each is available in tool-tips which +become visible as the mouse is hovered over them. + + + + Delovna postaja. + + + + Strežnik. + + + + Grafično okolje. + + + + Individual Package Selection: You can use this option to manually add or +remove packages. + + + Read for instructions on how to do a +minimal install. +
+ diff --git a/docs/installer/sl/choosePackagesTree.xml b/docs/installer/sl/choosePackagesTree.xml new file mode 100644 index 00000000..9254bd18 --- /dev/null +++ b/docs/installer/sl/choosePackagesTree.xml @@ -0,0 +1,23 @@ +
+ + + Izbira posamičnih paketov + + + + + + + + + Here you can add or remove any extra packages to customise your +installation. + + After having made your choice, you can click on the floppy +icon at the bottom of the page to save your choice of packages +(saving to a USB key works, too). You can then use this file to install the +same packages on another system, by pressing the same button during install +and choosing to load it. +
+ diff --git a/docs/installer/sl/configureServices.xml b/docs/installer/sl/configureServices.xml new file mode 100644 index 00000000..8f2f8b70 --- /dev/null +++ b/docs/installer/sl/configureServices.xml @@ -0,0 +1,40 @@ + +
+ + + + Nastavite vaše storitve + + + + + + + + + + + + + + Here you can set which services should (not) start when you boot your +system. + + There are four groups, click on the triangle before a group to expand it and +see all services in it. + + The setting DrakX chose are usually good. + + If you highlight a service, some information about it is shown in the info +box below. + + Only change things when you know very well what you are doing. +
+ diff --git a/docs/installer/sl/configureTimezoneUTC.xml b/docs/installer/sl/configureTimezoneUTC.xml new file mode 100644 index 00000000..942544d1 --- /dev/null +++ b/docs/installer/sl/configureTimezoneUTC.xml @@ -0,0 +1,37 @@ + +
+ + + + Nastavite vaš časovni pas + + + + + + + + + + + + + Choose your time zone by choosing your country or a city close to you in the +same time zone. + + In next screen you can choose to set your hardware clock to local time or to +GMT, also known as UTC. + + + If you have more than one operating system on your computer, make sure they +are all set to local time, or all to UTC/GMT. + +
+ diff --git a/docs/installer/sl/configureX_card_list.xml b/docs/installer/sl/configureX_card_list.xml new file mode 100644 index 00000000..3633ac6b --- /dev/null +++ b/docs/installer/sl/configureX_card_list.xml @@ -0,0 +1,59 @@ +
+ + + + + + + + + + + + + + +Choose an X Server (Configure your Graphic Card) + + + + + + DrakX has a very comprehensive database of video cards and will usually +correctly identify your video device. + + If the installer has not correctly detected your graphic card and you know +which one you have, you can select it from the tree by: + + Proizvajalec + + + + ime vaše kartice + + + + and the type of card + + + + If you cannot find your card in the vendor lists (because it's not yet in +the database or it's an older card) you may find a suitable driver in the +Xorg category + + The Xorg listing provides more than 40 generic and open source video card +drivers. If you still can't find a named driver for your card there is the +option of using the vesa driver which provides basic capabilities. + + Be aware that if you select an incompatible driver you may only have access +to the Commandline Interface. + + Some video card manufacturers provide proprietary drivers for Linux which +may only be available in the Nonfree repository and in some cases only from +the card manufacturers' websites. + + The Nonfree repository needs to be explicitly enabled to access them. If +you didn't select it previously, you should do this after your first reboot. +
\ No newline at end of file diff --git a/docs/installer/sl/configureX_chooser.xml b/docs/installer/sl/configureX_chooser.xml new file mode 100644 index 00000000..c0df7e6d --- /dev/null +++ b/docs/installer/sl/configureX_chooser.xml @@ -0,0 +1,64 @@ +
+ + + Nastavitev grafične kartice in monitorja + + + + + + + + + + No matter which graphical environment (also known as desktop environment) +you chose for this install of Mageia, they are +all based on a graphical user interface system called X Window +System, or simply X. So in order for +KDE, Gnome, LXDE or +any other graphical environment to work well, the following +X settings need to be correct. Choose the correct +settings if you can see that DrakX didn't make a +choice, or if you think the choice is incorrect. + + + + Graphic card: Choose your card +from the list if needed. + + + + Monitor: You can choose +Plug'n Play when applicable, or choose your monitor +from the Vendor or Generic +list. Choose Custom if you prefer to manually set the +horizontal and vertical refresh rates of your monitor. + + + Napačna frekvenca osveževanja lahko poškoduje vaš monitor + + + + + Resolution: Set the desired +resolution and color depth of your monitor here. + + + + Test: The test button does not +always appear during install. If the button is there, you can control your +settings by pressing it. If you see a question asking you whether your +settings are correct, you can answer "yes", and the settings will be +kept. If you don't see anything, you'll return to the configuration screen +and be able to reconfigure everything until the test is good. Make +sure your settings are on the safe side if the test button isn't +available + + + + Options: Here you can choose to +enable or disable various options. + + +
diff --git a/docs/installer/sl/configureX_monitor.xml b/docs/installer/sl/configureX_monitor.xml new file mode 100644 index 00000000..e0f8482d --- /dev/null +++ b/docs/installer/sl/configureX_monitor.xml @@ -0,0 +1,83 @@ + +
+ + + + + + + + + + + + + +Izberite vaš zaslon + + + DrakX has a very comprehensive database of monitors and will usually +correctly identify yours. + + + Selecting a monitor with different characteristics could damage +your monitor or video hardware. Please don't try something without knowing +what you are doing. If in doubt you should consult your monitor +documentation + + + + + + Custom + + This option allows you to set two critical parameters, the vertical refresh +rate and the horizontal sync rate. Vertical refresh determines how often the +screen is refreshed and horizontal sync is the rate at which scan lines are +displayed. + + It is VERY IMPORTANT that you do not specify a monitor +type with a sync range that is beyond the capabilities of your monitor: you +may damage your monitor. If in doubt, choose a conservative setting and +consult your monitor documentation. + + Plug 'n Play + + This is the default option and tries to determine the monitor type from the +monitor database. + + Vendor + + If the installer has not correctly detected your monitor and you know which +one you have, you can select it from the tree by selecting: + + Proizvajalec + + + + the monitor manufacturers name + + + + the monitor description + + + + Generic + + selecting this group displays nearly 30 display configurations such as +1024x768 @ 60Hz and includes Flat panel displays as used in laptops. This is +often a good monitor selection group if you need to use the Vesa card driver +when your video hardware cannot be determined automatically. Once again it +may be wise to be conservative in your selections. +
diff --git a/docs/installer/sl/diskdrake.xml b/docs/installer/sl/diskdrake.xml new file mode 100644 index 00000000..cfbfbef8 --- /dev/null +++ b/docs/installer/sl/diskdrake.xml @@ -0,0 +1,61 @@ +
+ + + + + + + + + + + + + + + + + + + + + +Razdeljevanje diska po meri s programom DiskDrake + + + + + + + + + + If you wish to use encryption on your / partition you +must ensure that you have a separate /boot partition. The +encryption option for the /boot partition must NOT be +set, otherwise your system will be unbootable. + + + Adjust the layout of your disk(s) here. You can remove or create partitions, +change the filesystem of a partition or change its size and even view what +is in them before you start. + + + There is a tab for every detected hard disk or other storage device, like an +USB key. For example sda, sdb and sdc if there are three of them. + + + Push Clear all to wipe all partitions on the selected +storage device + + For all other actions: click on the desired partition first. Then view it, +or choose a filesystem and a mount point, resize it or wipe it. + + Continue until you adjusted everything to your wishes. + + Click Done when you're ready.
\ No newline at end of file diff --git a/docs/installer/sl/doPartitionDisks.xml b/docs/installer/sl/doPartitionDisks.xml new file mode 100644 index 00000000..bf32a87a --- /dev/null +++ b/docs/installer/sl/doPartitionDisks.xml @@ -0,0 +1,117 @@ +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Razdelitev diska + + + In this screen you can see the content of your hard drive(s) and see the +solutions the DrakX partitioning wizard found for where to install +Mageia. + + The options available from the list below will vary depending on your +particular hard drive(s) layout and content. + + + + + + + Uporabi obstoječe razdelke + + If this option is available, then existing Linux compatible partitions have +been found and may be used for the installation. + + + + Uporabi razpoložljivi prostor + + If you have unused space on your hard drive then this option will use it for +your new Mageia installation. + + + + Uporabi razpoložljivi prostor v razdelku za Windows + + If you have unused space on an existing Windows partition, the installer may +offer to use it. + + This can be a useful way of making room for your new Mageia installation, +but is a risky operation so you should make sure you have backed up all +important files! + + Note that this involves shrinking the size of the Windows partition. The +partition must be "clean", meaning that Windows must have closed down +correctly the last time it was used. It must also have been defragmented, +although this is not a guarantee that all files in the partition have been +moved out of the area that is about to be used. It is highly recommended to +back up your personal files. + + + + Zbriši in uporabi celoten disk. + + This option will use the complete drive for Mageia. + + Note! This will erase ALL data on the selected hard drive. Take care! + + If you intend to use part of the disk for something else, or you already +have data on the drive that you are not prepared to lose, then do not use +this option. + + + + Po meri + + This gives you complete control over the placing of the installation on your +hard drive(s). + + + + + Some newer drives are now using 4096 byte logical sectors, instead of the +previous standard of 512 byte logical sectors. Due to lack of available +hardware, the partitioning tool used in the installer has not been tested +with such a drive. Also some ssd drives now use an erase block size over 1 +MB. We suggest to pre-partition the drive, using an alternative partitioning +tool like gparted, if you own such a device, and to use the following +settings: + + "Align to" "MiB" + + "Free space preceding (MiB)" "2" + + Also make sure all partitions are created with an even number of megabytes. + +
\ No newline at end of file diff --git a/docs/installer/sl/exitInstall.xml b/docs/installer/sl/exitInstall.xml new file mode 100644 index 00000000..49addb1b --- /dev/null +++ b/docs/installer/sl/exitInstall.xml @@ -0,0 +1,38 @@ +
+ + + Čestitke + + + + + + + + + + + + + + + + + You have finished installing and configuring +Mageia and it is now safe to remove the +installation medium and reboot your computer. + + After reboot, in the bootloader screen, you can choose between the operating +systems on your computer (if you have more than one). + + If you didn't adjust the settings for the bootloader, your Mageia install +will be automatically selected and started. + + Uživajte + + Visit www.mageia.org if you have any questions or want to contribute to +Mageia + + +
\ No newline at end of file diff --git a/docs/installer/sl/formatPartitions.xml b/docs/installer/sl/formatPartitions.xml new file mode 100644 index 00000000..6d507e5a --- /dev/null +++ b/docs/installer/sl/formatPartitions.xml @@ -0,0 +1,43 @@ +
+ + + Formatiranje + + + + + + + + + + + + + + + + + + + + + Here you can choose which partition(s) you wish to format. Any data on +partitions not marked for formatting will be saved. + + Usually at least the partitions DrakX selected, need to be formatted + + Click on Advanced to choose partitions you want to +check for so called bad blocks + + + If you're not sure you have made the right choice, you can click on +Previous, again on Previous +and then on Custom to get back to the main screen. +In that screen you can choose to view what is in your partitions. + + + When you are confident about the selection, click on +Next to continue. +
diff --git a/docs/installer/sl/installUpdates.xml b/docs/installer/sl/installUpdates.xml new file mode 100644 index 00000000..0e62196c --- /dev/null +++ b/docs/installer/sl/installUpdates.xml @@ -0,0 +1,31 @@ + + +
Posodobitve + + + + + + + + + + + + + + + + + Since this version of Mageia was released, some +packages will have been updated or improved. + + Choose yes if you wish to download and install them, +select no if you don't want to do this now, or if you +aren't connected to the Internet + + Then press Next to continue + +
+ \ No newline at end of file diff --git a/docs/installer/sl/installer.xml b/docs/installer/sl/installer.xml new file mode 100644 index 00000000..451e88e4 --- /dev/null +++ b/docs/installer/sl/installer.xml @@ -0,0 +1,253 @@ +
+ + + + + + + + + + + + + + + + + + + +DrakX, the Mageia Installer + + + Whether you are new to GNU-Linux or an experienced user, the Mageia +Installer is designed to help make your installation or upgrade as easy as +possible. + + + + +The initial menu screen has various options, however the default one will +start the installer, which will normally be all that you will need. + +
+ + Installation Welcome Screen + + + Here is the default welcome screen when using a Mageia DVD: + + +
+ + From this first screen, it is possible to set some personal preferences: + + + + The language (for the installation only, may be different that the chosen +language for the system) by pressing the key F2 + + + + + + + Use the arrow keys to select the language and press the key Enter. + + Here is for example, the French welcome screen when using a Live +DVD/CD. Note that the Live DVD/CD menu does not propose: Rescue +System, Memory test and Hardware +Detection Tool. + + + + + + + + + + + Change the screen resolution by pressing the F3 key. + + + + + + + Add some kernel options by pressing the F6 key. + + If the installation fails, then it may be necessary to try again using one +of the extra options. The menu called by F6 displays a new line called +Boot options and propose four entries: + + - Default, it doesn't alter anything in the default options. + + - Safe Settings, priority is given to the safer options to the detriment of +performances. + + - No ACPI (Advanced Configuration and Power Interface), power management +isn't taken into account. + + - No Local APIC (Local Advanced Programmable Interrupt Controller), it is +about CPU interruptions, select this option if you are asked for. + + When you select one of these entries, it modifies the default options +displayed in the Boot Options line. + + + In some Mageia releases, it may happen that the entries selected with the +key F6 does not appear in the Boot Options line, +however, they are really taken into account. + + + + + + + + Add more kernel options by pressing the key F1 + + Pressing F1 opens a new window with more available options. Select one with +the arrow keys and press Enter to have more details or press the Esc key to +go back to the welcome screen. + + + + + + + + + The detailed view about the option splash. Press Esc or select +Return to Boot Options to go back to the options +list. These options can by added by hand in the Boot +options line. + + + + + + + + The help is translated in the chosen language with the F2 key. + + + + + Here is the default welcome screen when using a Wired Network-based +Installation CD (Boot.iso or Boot-Nonfree.iso images): + + It does not allow to change the language, the available options are +described in the screen. For more information about using a Wired +Network-based Installation CD, see the Mageia +Wiki + + + Postavitev tipkovnice je sedaj Ameriška + + + + + +
+ + Namestitveni koraki + + + The install process is divided into a number of steps, which can be followed +on the side panel of the screen. + + Each step has one or more screens which may also have +Advanced buttons with extra, less commonly required, +options. + + Most screens have Help buttons which give further +explanations about the current step. + + + If somewhere during install you decide to stop the installation, it is +possible to reboot, but please think twice before you do this. Once a +partition has been formatted or updates have started to be installed, your +computer is no longer in the same state and rebooting it could very well +leave you with an unusable system. If in spite of this you are very sure +rebooting is what you want, go to a text terminal by pressing the three keys +Alt Ctrl F2 at the same time. After that, press +Alt Ctrl Delete simultaneously to reboot. + +
+ +
+
+ + Installation Problems and Possible Solutions + + +
+ + No Graphical Interface + + + + + After the initial screen you did not reach the language selection +screen. This can happen with some graphic cards and older systems. Try using +low resolution by typing vgalo at the prompt. + + + + If the hardware is very old, a graphical installation may not be +possible. In this case it is worth trying a text mode installation. To use +this hit ESC at the first welcome screen and confirm with ENTER. You will be +presented with a black screen with the word "boot:". Type "text" and hit +ENTER. Now continue with the installation in text mode. + + +
+ +
+ + The Install Freezes + + + If the system appeared to freeze during the installation, this may be a +problem with hardware detection. In this case the automatic detection of +hardware may be bypassed and dealt with later. To try this, type +noauto at the prompt. This option may also be combined with +other options as necessary. +
+ +
+ + RAM problem + + + These will rarely be needed, but in some cases the hardware may report the +available RAM incorrectly. To specify this manually, you can use the +mem=xxxM parameter, where xxx is the correct amount of +RAM. e.g. mem=256M would specify 256MB of RAM. +
+ +
+ + Dynamic partitions + + + If you converted your hard disk from "basic" format to "dynamic" format on +Microsoft Windows, you must know that it is impossible to install Mageia on +this disc. To go back to a basic disk, see the Microsoft documentation: +http://msdn.microsoft.com/en-us/library/cc776315.aspx. +
+
+
+
\ No newline at end of file diff --git a/docs/installer/sl/media_selection.xml b/docs/installer/sl/media_selection.xml new file mode 100644 index 00000000..823bdf70 --- /dev/null +++ b/docs/installer/sl/media_selection.xml @@ -0,0 +1,46 @@ +
+ + Media Selection (Nonfree) + + + + + + + + + + + + + + + Here you have the list of available repositories. Not all repositories are +available, according to which media you use for installing. The repositories +selection determines which packages will be available for selection during +the next steps. + + + + The Core repository cannot be disabled as it contains +the base of the distribution. + + + + The Nonfree repository includes packages that are +free-of-charge, i.e. Mageia may redistribute them, but they contain +closed-source software (hence the name - Nonfree). For example this +repository includes nVidia and ATI graphics card proprietary drivers, +firmware for various WiFi cards, etc. + + + + The Tainted repository includes packages released under +a free license. The main criteria for placing packages in this repository is +that they may infringe patents and copyright laws in some countries, +e.g. Multimedia codecs needed to play various audio/video files; packages +needed to play commercial video DVD, etc. + + +
\ No newline at end of file diff --git a/docs/installer/sl/minimal-install.xml b/docs/installer/sl/minimal-install.xml new file mode 100644 index 00000000..2156d572 --- /dev/null +++ b/docs/installer/sl/minimal-install.xml @@ -0,0 +1,27 @@ +
+ + + + Minimalna namestitev + + + + + + You can choose a Minimal Installation by de-selecting everything in the +Package Group Selection screen, see . + Minimal Installation is intended for those with specific uses in mind for +their Mageia, such as a server or a specialised +workstation. You will probably use this option combined with Manual Package +Selection, see . + If you choose this installation class, then the related screen will offer +you a few useful extras to install, such as documentation and X. + + + + + +
+ diff --git a/docs/installer/sl/misc-params.xml b/docs/installer/sl/misc-params.xml new file mode 100644 index 00000000..0afa2c99 --- /dev/null +++ b/docs/installer/sl/misc-params.xml @@ -0,0 +1,210 @@ +
+ + Summary of miscellaneous parameters + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + DrakX made smart choices for the configuration of your system depending on +the choices you made and on the hardware DrakX detected. You can check the +settings here and change them if you want after pressing +Configure. + +
+ + System parameters + + + + + Časovni pas + + DrakX selected a time zone for you, depending on your preferred +language. You can change it if needed. See also + + + + Država + + If you are not in the selected country, it is very important that you +correct the setting. See + + + + Zagonski nalagalnik + + DrakX has made good choices for the bootloader setting. + + Do not change anything, unless you know how to configure Grub and/or Lilo + + For more information, see + + + + User management + + You can add extra users here. They will each get their own +/home directories. + + + + Services: + + System services refer to those small programs which run the background +(daemons). This tool allows you to enable or disable certain tasks. + + You should check carefully before changing anything here - a mistake may +prevent your computer from operating correctly. + + For more information, see + + +
+ +
+ + Hardware parameters + + + + + Tipkovnica: + + This is where you setup or change your keyboard layout which will depend on +your location, language or type of keyboard. + + + + Mouse: + + Here you can add or configure other pointing devices, tablets, trackballs +etc. + + + + Sound card: + + The installer uses the default driver, if there is a default one. The option +to select a different driver is only given when there is more than one +driver for your card, but none of them is the default one. + + + + Graphical interface: + + This section allows you to configure your graphic card(s) and displays. + + For more information, see . + + + + + + +
+ +
+ + Network and Internet parameters + + + + + Network: + + You can configure your network here, but for network cards with non-free +drivers it is better to do that after reboot, in the Mageia +Control Center, if you have not yet enabled the Nonfree media +repositories. + + + When you add a network card, do not forget to set your firewall to watch +that interface as well. + + + + + Proxies: + + A Proxy Server acts as an intermediary between your computer and the wider +internet. This section allows you to configure your computer to utilize a +proxy service. + + You may need to consult your systems administrator to get the parameters you +need to enter here + + +
+ +
+ + Varnost + + + + + Security Level: + + Here you set the Security level for your computer, in most cases the default +setting (Standard) is adequate for general use. + + Check the option which best suits your usage. + + + + Firewall: + + A firewall is intended to be a barrier between your important data and the +rascals out there on the internet who would compromise or steal it. + + Select the services that you wish to have access to your system. Your +selections will depend on what you use your computer for. + + + Bear in mind that allowing everything (no firewall) may be very risky. + + + +
+
diff --git a/docs/installer/sl/resizeFATChoose.xml b/docs/installer/sl/resizeFATChoose.xml new file mode 100644 index 00000000..22e96720 --- /dev/null +++ b/docs/installer/sl/resizeFATChoose.xml @@ -0,0 +1,33 @@ + +
+ + + + + + + + +Resize <application>Windows<superscript>®</superscript></application> +partition + + + You have more than one +Windows® partition. +Choose which one should be made smaller to make space for installing +Mageia. + + + + +
diff --git a/docs/installer/sl/securityLevel.xml b/docs/installer/sl/securityLevel.xml new file mode 100644 index 00000000..0c7d53a9 --- /dev/null +++ b/docs/installer/sl/securityLevel.xml @@ -0,0 +1,32 @@ + +
+ + + + Stopnja varnosti + + + + + + + + + + + + You can adjust your security level here. + + Leave the default settings as they are, if you don't know what to choose. + + After install, it will always be possible to adjust your security settings +in the Security part of the Mageia Control Center. +
+ diff --git a/docs/installer/sl/selectCountry.xml b/docs/installer/sl/selectCountry.xml new file mode 100644 index 00000000..76c9713a --- /dev/null +++ b/docs/installer/sl/selectCountry.xml @@ -0,0 +1,63 @@ + +
+ + + + + Select your Country / Region + + + + + + + + + + + + + Select your country or region. This is important for all kinds of settings, +like the currency and wireless regulatory domain. Setting the wrong country +can lead to not being able to use a Wireless network. + + If your country isn't in the list, click the Other +Countries button and choose your country / region there. + + + If your country is only in the Other Countries list, +after clicking OK it may seem a country from the +first list was chosen. Please ignore this, DrakX will follow your real +choice. + + +
+ + + Način vnosa + + + In the Other Countries screen you can also select an +input method (at the bottom of the list). Input methods allow users to input +multilingual characters (Chinese, Japanese, Korean, etc). IBus is the +default input method in Mageia DVDs, Africa/India and Asia/no-India +Live-CDs. For Asian and African locales, IBus will be set as default input +method so users should not need to configure it manually. Other input +methods(SCIM, GCIN, HIME, etc) also provide similar functions and can be +installed if you added HTTP/FTP media before package selection. + + + If you missed the input method setup during installation, you can access it +after you boot your installed system via "Configure your Computer" -> +"System", or by running localedrake as root. + +
+
+ diff --git a/docs/installer/sl/selectInstallClass.xml b/docs/installer/sl/selectInstallClass.xml new file mode 100644 index 00000000..f32009d3 --- /dev/null +++ b/docs/installer/sl/selectInstallClass.xml @@ -0,0 +1,74 @@ + +
+ + + + + + + + + + + + + + + + +Namestitev ali nadgradnja + + + + + + + + Namesti + + Use this option for a fresh Mageia installation. + + + + Nadgradnja + + If you have one or more Mageia installations on +your system, the installer will allow you to upgrade one of them to the +latest release. + + + Only upgrading from a previous Mageia version that was still +supported when this installer's version was released, has been +thoroughly tested. If you want to upgrade a Mageia version that had already +reached its End Of Life when this one was released, then it is better to do +a clean install while preserving your /home partition. + + + + + + If during install you decide to stop the installation, it is possible to +reboot, but please think twice before you do this. Once a partition has been +formatted or updates have started to be installed, your computer isn't in +the same state anymore and rebooting it could very well leave you with an +unusable system. If in spite of that you are very sure rebooting is what you +want, go to a text terminal by pressing the three keys Alt Ctrl +F2 at the same time. After that, press Alt Ctrl +Delete simultaneously to reboot. + + + + If you have discovered that you forgot to select an additional language, you +can return from the "Install or Upgrade" screen to the language choice +screen by pressing Alt Ctrl Home. Do +not do this later in the install. + +
diff --git a/docs/installer/sl/selectKeyboard.xml b/docs/installer/sl/selectKeyboard.xml new file mode 100644 index 00000000..60bed22f --- /dev/null +++ b/docs/installer/sl/selectKeyboard.xml @@ -0,0 +1,56 @@ + +
+ + + + + + + +Tipkovnica + + + DrakX selects an appropriate keyboard for your language. If no suitable +keyboard is found it will default to a US keyboard layout. + + + + + + + + Make sure that the selection is correct or choose another keyboard +layout. If you don't know which layout your keyboard has, look in the +specifications that came with your system, or ask the computer vendor. There +may even be a label on the keyboard that identifies the layout. You can also +look here: en.wikipedia.org/wiki/Keyboard_layout + + + + If your keyboard isn't in the list shown, click on +More to get a full list, and select your keyboard +there. + + + After choosing a keyboard from the More dialog, +you'll return to the first keyboard choice dialog and it will seem as though +a keyboard from that screen was chosen. You can safely ignore this anomaly +and continue the installation: Your keyboard is the one you chose from the +full list. + + + + + If you choose a keyboard based on non-Latin characters, you will see an +extra dialog screen asking how you would prefer to switch between the Latin +and non-Latin keyboard layouts + + +
diff --git a/docs/installer/sl/selectLanguage.xml b/docs/installer/sl/selectLanguage.xml new file mode 100644 index 00000000..f31243fc --- /dev/null +++ b/docs/installer/sl/selectLanguage.xml @@ -0,0 +1,67 @@ + +
+ + + + + + + + + + + + + + + + + +Izberite jezik namestitve + + + Select your preferred language, by first expanding the list for your +continent. Mageia will use this selection during +the installation and for your installed system. + + If it is likely that you will require several languages installed on your +system, for yourself or other users, then you should use the +Multiple languages button to add them now. It will be +difficult to add extra language support after installation. + + + + + + Even if you choose more than one language, you must first choose one of them +as your preferred language in the first language screen. It will also be +marked as chosen in the multiple languages screen . + + + + + If your keyboard language is not the same as your preferred language, then +it is advisable to install the language of your keyboard as well. + + + + Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the +"multiple languages" screen if you know that it is inappropriate for your +language. Disabling UTF-8 applies to all installed languages. + + + + You can change the language of your system after installation in the Mageia +Control Center -> System -> Manage localization for your system. + + +
diff --git a/docs/installer/sl/selectMouse.xml b/docs/installer/sl/selectMouse.xml new file mode 100644 index 00000000..1660399d --- /dev/null +++ b/docs/installer/sl/selectMouse.xml @@ -0,0 +1,31 @@ +
+ + + Select mouse + + + + + + + + + + + + + + + + + + If you are not happy with how your mouse responds, you can select a +different one here. + + Usually, Universal - Any PS/2 and USB +mice is a good choice. + + Select Universal - Force evdev to +configure the buttons that do not work on a mouse with six or more buttons. +
diff --git a/docs/installer/sl/setupBootloader.xml b/docs/installer/sl/setupBootloader.xml new file mode 100644 index 00000000..628a3fb1 --- /dev/null +++ b/docs/installer/sl/setupBootloader.xml @@ -0,0 +1,89 @@ +
+ + Glavne možnosti zagonskega nalagalnika + + + + + + + + + If you prefer different bootloader settings to those chosen automatically by +the installer, you can change them here. + + You may already have another operating system on your machine, in which case +you need to decide whether to add Mageia to your existing bootloader, or +allow Mageia to create a new one. + + + The Mageia graphical menus are nice :) + + +
+ + Using a Mageia bootloader + + + By default, Mageia writes a new GRUB (legacy) bootloader into the MBR +(Master Boot Record) of your first hard drive. If you already have other +operating systems installed, Mageia attempts to add them to your new Mageia +boot menu. + + Mageia now also offers GRUB2 as an optional bootloader in addition to GRUB +legacy and Lilo. + + + Linux systems which use the GRUB2 bootloader are not currently supported by +GRUB (legacy) and will not be recognised if the default GRUB bootloader is +used. + + The best solution here is to use the GRUB2 bootloader which is available at +the Summary page during installation. + +
+ +
+ + Using an existing bootloader + + + If you decide to use an existing bootloader then you will need to remember +to STOP at the summary page during the installation and click the Bootloader +Configure button, which will allow you to change the +bootloader install location. + + Do not select a device e.g."sda", or you will overwrite your existing +MBR. You must select the root partition that you chose during the +partitioning phase earlier, e.g. sda7. + + To be clear, sda is a device, sda7 is a partition on that device. + + + Go to tty2 with Ctrl+Alt+F2 and type df to check where +your / (root) partition is. Ctrl+Alt+F7 takes you back to +the installer screen. + + + The exact procedure for adding your Mageia system to an existing bootloader +is beyond the scope of this help, however in most cases it will involve +running the relevant bootloader installation program which should detect and +add it automatically. See the documentation for the operating system in +question. +
+ +
+ + Napredne možnosti zagonskega nalagalnika + + + If you have very limited disk space for the / partition +that contains /tmp, click on +Advanced and check the box for Clean /tmp +at each boot. This helps to maintain some free space. +
+
\ No newline at end of file diff --git a/docs/installer/sl/setupBootloaderAddEntry.xml b/docs/installer/sl/setupBootloaderAddEntry.xml new file mode 100644 index 00000000..cf393cfc --- /dev/null +++ b/docs/installer/sl/setupBootloaderAddEntry.xml @@ -0,0 +1,39 @@ +
+ + Add or Modify a Boot Menu Entry + + + + + + You can add an entry or modify the one you select first, by pressing the +relevant button in the Bootloader Configuration screen +and editing the screen that pops up on top of it. + + + If you have chosen Grub 2 as your bootloader, you cannot use +this tool to edit entries at this step, press 'Next'. You need to manually +edit /boot/grub2/custom.cfg or use grub-customizer +instead. + + + + + + + Some things that can be done without any risk, are changing the label of an +entry and ticking the box to make an entry the default one. + + You can add the proper version number of an entry, or rename it completely. + + The default entry is the one the systems boots into if you don't make a +choice while booting up. + + + Editing other things can leave you with an unbootable system. Please don't +just try something without knowing what you are doing. + +
\ No newline at end of file diff --git a/docs/installer/sl/setupSCSI.xml b/docs/installer/sl/setupSCSI.xml new file mode 100644 index 00000000..4a5da6b8 --- /dev/null +++ b/docs/installer/sl/setupSCSI.xml @@ -0,0 +1,45 @@ + +
+ + + Setup SCSI + + + + + + + + + + + + + + + + + + + + + + + + DrakX usually detects hard disks correctly. With some older SCSI controllers +it may be unable to determine the correct drivers to use and subsequently +fail to recognise the drive. + + If this happens, you will need to manually tell Drakx which SCSI drive(s) +you have. + + DrakX should then be able to configure the drive(s) correctly. +
diff --git a/docs/installer/sl/soundConfig.xml b/docs/installer/sl/soundConfig.xml new file mode 100644 index 00000000..6fcd9bee --- /dev/null +++ b/docs/installer/sl/soundConfig.xml @@ -0,0 +1,52 @@ + +
+ + + Nastavitve zvoka + + + + + + + + + In this screen the name of the driver that the installer chose for your +sound card is given, which will be the default driver if we have a default +one. + + The default driver should work without problems. However, if after install +you do encounter problems, then run draksound or start +this tool via MCC (Mageia Control Center), by choosing the +Hardware tab and clicking on Sound +Configuration at the top right of the screen. + + Then, in the draksound or "Sound Configuration" tool screen, click on +Advanced and then on +Troubleshooting to find very useful advice about how +to solve the problem. + + +
+ + Napredno + + + Clicking Advanced in this screen, during install, is +useful if there is no default driver and there are several drivers +available, but you think the installer selected the wrong one. + + + In that case you can select a different driver after clicking on +Let me pick any driver. + + +
+
diff --git a/docs/installer/sl/takeOverHdConfirm.xml b/docs/installer/sl/takeOverHdConfirm.xml new file mode 100644 index 00000000..3639e776 --- /dev/null +++ b/docs/installer/sl/takeOverHdConfirm.xml @@ -0,0 +1,30 @@ +
+ + + Confirm hard disk to be formatted + + + + + + + + + + + + + + + + + + Click on Previous if you are not sure about your +choice. + + Click on Next if you are sure and want to erase every +partition, every operating system and all data on that hard disk. +
-- cgit v1.2.1