path: root/sysconfig/network-scripts/ifup-ipsec

#!/bin/sh
#
# ifup-ipsec
#
# Brings up ipsec interfaces

handle_keys() {
    [ -z "$KEY_AH_IN" -a -n "$KEY_AH" ] && KEY_AH_IN=$KEY_AH
    [ -z "$KEY_AH_OUT" -a -n "$KEY_AH" ] && KEY_AH_OUT=$KEY_AH
    [ -z "$KEY_ESP_IN" -a -n "$KEY_ESP" ] && KEY_ESP_IN=$KEY_ESP
    [ -z "$KEY_ESP_OUT" -a -n "$KEY_ESP" ] && KEY_ESP_OUT=$KEY_ESP
    [ -z "$KEY_AESP_IN" -a -n "$KEY_AESP" ] && KEY_AESP_IN=$KEY_AESP
    [ -z "$KEY_AESP_OUT" -a -n "$KEY_AESP" ] && KEY_AESP_OUT=$KEY_AESP

    [ -n "$KEY_AH_IN" -a "$KEY_AH_IN" = "${KEY_AH_IN##0x}" ] \
	&& KEY_AH_IN=\"$KEY_AH_IN\"
    [ -n "$KEY_AH_OUT" -a "$KEY_AH_OUT" = "${KEY_AH_OUT##0x}" ] \
	&& KEY_AH_OUT=\"$KEY_AH_OUT\"
    [ -n "$KEY_ESP_IN" -a "$KEY_ESP_IN" = "${KEY_ESP_IN##0x}" ] \
	&& KEY_ESP_IN=\"$KEY_ESP_IN\"
    [ -n "$KEY_ESP_OUT" -a "$KEY_ESP_OUT" = "${KEY_ESP_OUT##0x}" ] \
	&& KEY_ESP_OUT=\"$KEY_ESP_OUT\"
    [ -n "$KEY_AESP_IN" -a "$KEY_AESP_IN" = "${KEY_AESP_IN##0x}" ] \
	&& KEY_AESP_IN=\"$KEY_AESP_IN\"
    [ -n "$KEY_AESP_OUT" -a "$KEY_AESP_OUT" = "${KEY_AESP_OUT##0x}" ] \
	&& KEY_AESP_OUT=\"$KEY_AESP_OUT\"
}

. /etc/init.d/functions
cd /etc/sysconfig/network-scripts
. ./network-functions

CONFIG=$1
[ -f "${CONFIG}" ] || CONFIG=ifcfg-${1}
source_config

handle_keys

if [ -n "$KEY_AH" -o -n "$KEY_ESP" ]; then
  KEYING=manual
fi


if [ -n "$IKE_PSK" ]; then
  KEYING=automatic
  IKE_METHOD=PSK
fi

if [ -n "$IKE_CERTFILE" ]; then
  KEYING=automatic
  IKE_METHOD=X509
fi

if [ -n "$IKE_PEER_CERTFILE" ]; then
  KEYING=automatic
  IKE_METHOD=X509
fi

if [ -n "$IKE_DNSSEC" ]; then
  KEYING=automatic
  IKE_METHOD=X509
fi

[ -n "$IKE_METHOD" ] && KEYING=automatic
[ -z "$KEYING" ] && KEYING=manual

if [ -z "$SRC" ]; then
    SRC=$(ip -o route get to $DST | sed "s|.*src \([^ ]*\).*|\1|")
fi

if [ -n "$SRCNET" -o -n "$DSTNET" ]; then
  TUNNEL_MODE=yes
  MODE=tunnel
  [ -z "$SRCNET" ] && SRCNET="$SRC/32"
  [ -z "$DSTNET" ] && DSTNET="$DST/32"
  SPD_SRC=$SRCNET
  SPD_DST=$DSTNET
  # If SRCNET is a subnet of DSTNET, exclude SRCNET<->SRCNET communication
  if [ "${SRCNET##*/}" -gt "${DSTNET##*/}" ] \
      && [ "$(ipcalc -n "${SRCNET%%/*}/${DSTNET##*/}")" \
           = "NETWORK=${DSTNET%%/*}" ]; then
    EXCLUDE_SRCNET=yes
  fi
  [ -z "$SRCGW" ] && SRCGW=$(ip -o route get to $SRCNET | sed "s|.*src \([^ ]*\).*|\1|")
  ip route add to $DSTNET via $SRCGW src $SRCGW
else
  unset TUNNEL_MODE
  MODE=transport
  SPD_SRC=$SRC
  SPD_DST=$DST
  unset EXCLUDE_SRCNET
fi

unset SPD_AH_IN SPD_AH_OUT SPD_ESP_IN SPD_ESP_OUT
if [ "$KEYING" = "manual" ]; then
    [ -z "$AH_PROTO" ] && AH_PROTO=hmac-sha1
    [ -z "$ESP_PROTO" ] && ESP_PROTO=3des-cbc
    [ -z "$AESP_PROTO" ] && AESP_PROTO=hmac-sha1

    [ -n "$KEY_AH_IN" ] && SPD_AH_IN=yes
    [ -n "$KEY_AH_OUT" ] && SPD_AH_OUT=yes
    [ -n "$KEY_ESP_IN" ] && SPD_ESP_IN=yes
    [ -n "$KEY_ESP_OUT" ] && SPD_ESP_OUT=yes
else
    [ -z "$IKE_DHGROUP" ] && IKE_DHGROUP=2
    [ -z "$AH_PROTO" ] && AH_PROTO=sha1
    [ -z "$ESP_PROTO" ] && ESP_PROTO=3des
    [ -z "$IKE_AUTH" ] && IKE_AUTH=$AH_PROTO
    [ -z "$IKE_ENC" ] && IKE_ENC=$ESP_PROTO
    [ "$IKE_AUTH" = "none" ] && IKE_AUTH=sha1
    [ "$IKE_ENC" = "none" ] && IKE_ENC=3des

    SPD_AH_IN=yes
    SPD_AH_OUT=yes
    SPD_ESP_IN=yes
    SPD_ESP_OUT=yes
fi

if [ "$AH_PROTO" = "none" ]; then
    unset SPI_AH_IN SPI_AH_OUT KEY_AH_IN KEY_AH_OUT SPD_AH_IN SPD_AH_OUT
fi
if [ "$ESP_PROTO" = "none" ]; then
    unset SPI_ESP_IN SPI_ESP_OUT KEY_ESP_IN KEY_ESP_OUT SPD_ESP_IN SPD_ESP_OUT
fi

/sbin/setkey -c >/dev/null 2>&1 << EOF
${SPI_AH_OUT:+delete $SRC $DST ah $SPI_AH_OUT;}
${SPI_AH_IN:+delete $DST $SRC ah $SPI_AH_IN;}
${SPI_ESP_OUT:+delete $SRC $DST esp $SPI_ESP_OUT;}
${SPI_ESP_IN:+delete $DST $SRC esp $SPI_ESP_IN;}
spddelete $SPD_SRC $SPD_DST any -P out;
spddelete $SPD_DST $SPD_SRC any -P in;
${EXCLUDE_SRCNET:+spddelete $SPD_SRC $SPD_SRC any -P out;}
${EXCLUDE_SRCNET:+spddelete $SPD_SRC $SPD_SRC any -P in;}
EOF

# ESP
if [ "$ESP_PROTO" != "none" ]; then
    /sbin/setkey -c >/dev/null 2>&1 << EOF
    ${KEY_ESP_IN:+add $DST $SRC esp $SPI_ESP_IN ${TUNNEL_MODE:+-m tunnel} \
    -E ${ESP_PROTO_IN:-$ESP_PROTO} $KEY_ESP_IN \
    ${KEY_AESP_IN:+-A ${AESP_PROTO_IN:-$AESP_PROTO} $KEY_AESP_IN}
    ;}
    ${KEY_ESP_OUT:+add $SRC $DST esp $SPI_ESP_OUT ${TUNNEL_MODE:+-m tunnel} \
    -E ${ESP_PROTO_OUT:-$ESP_PROTO} $KEY_ESP_OUT \
    ${KEY_AESP_OUT:+-A ${AESP_PROTO_OUT:-$AESP_PROTO} $KEY_AESP_OUT}
    ;}
EOF
fi

# AH
if [ "$AH_PROTO" != "none" ]; then
    /sbin/setkey -c >/dev/null 2>&1 << EOF
    ${KEY_AH_IN:+add $DST $SRC ah $SPI_AH_IN ${TUNNEL_MODE:+-m tunnel} -A ${AH_PROTO_IN:-$AH_PROTO} $KEY_AH_IN;}
    ${KEY_AH_OUT:+add $SRC $DST ah $SPI_AH_OUT ${TUNNEL_MODE:+-m tunnel} -A ${AH_PROTO_OUT:-$AH_PROTO} $KEY_AH_OUT;}
EOF
fi

/sbin/setkey -c >/dev/null 2>&1 << EOF
${EXCLUDE_SRCNET:+spdadd $SPD_SRC $SPD_SRC any -P out none;}
${EXCLUDE_SRCNET:+spdadd $SPD_SRC $SPD_SRC any -P in none;}
EOF

# This looks weird but if you use both ESP and AH you need to configure them together, not seperately.
if [ "$ESP_PROTO" != "none" ] && [ "$AH_PROTO" != "none" ]; then
/sbin/setkey -c >/dev/null 2>&1 << EOF
spdadd $SPD_SRC $SPD_DST any -P out ipsec
            ${SPD_ESP_OUT:+esp/$MODE/${TUNNEL_MODE:+$SRC-$DST}/require}
            ${SPD_AH_OUT:+ah/$MODE/${TUNNEL_MODE:+$SRC-$DST}/require}
	    ;

spdadd $SPD_DST $SPD_SRC any -P in ipsec
	    ${SPD_ESP_IN:+esp/$MODE/${TUNNEL_MODE:+$DST-$SRC}/require}
	    ${SPD_AH_IN:+ah/$MODE/${TUNNEL_MODE:+$DST-$SRC}/require}
	    ;
EOF
elif [ "$AH_PROTO" = "none" ]; then
/sbin/setkey -c >/dev/null 2>&1 << EOF
spdadd $SPD_SRC $SPD_DST any -P out ipsec
            ${SPD_ESP_OUT:+esp/$MODE/${TUNNEL_MODE:+$SRC-$DST}/require}
	    ;

spdadd $SPD_DST $SPD_SRC any -P in ipsec
	    ${SPD_ESP_IN:+esp/$MODE/${TUNNEL_MODE:+$DST-$SRC}/require}
	    ;
EOF
elif [ "$ESP_PROTO" = "none" ]; then
/sbin/setkey -c >/dev/null 2>&1 << EOF
spdadd $SPD_SRC $SPD_DST any -P out ipsec
            ${SPD_AH_OUT:+ah/$MODE/${TUNNEL_MODE:+$SRC-$DST}/require}
	    ;

spdadd $SPD_DST $SPD_SRC any -P in ipsec
	    ${SPD_AH_IN:+ah/$MODE/${TUNNEL_MODE:+$DST-$SRC}/require}
	    ;
EOF
fi

if [ "$KEYING" = "automatic" -a -n "$IKE_METHOD" ]; then
    if [ "$IKE_METHOD" = "PSK" ]; then
       MYID=address
       if [ -n "$MYID_TYPE" ]; then
          case "$MYID_TYPE" in
             *fqdn*)
                 MYID="$MYID_TYPE \"$MYID_VALUE\""
             ;;
          esac
       fi
       tmpfile=$(mktemp /etc/racoon/psk.XXXXXX)
       grep -v "^$DST " /etc/racoon/psk.txt > $tmpfile
       echo "$DST  $IKE_PSK" >> $tmpfile
       mv -f $tmpfile /etc/racoon/psk.txt
    fi
    if [ ! -f /etc/racoon/$DST.conf ] || [ /etc/racoon/$DST.conf -ot $1 ] ; then
        cat > /etc/racoon/$DST.conf << EOF
remote $DST
{
	exchange_mode aggressive, main;
EOF
        case "$IKE_METHOD" in
           PSK)
	      cat >> /etc/racoon/$DST.conf << EOF
	my_identifier $MYID;
	proposal {
	        encryption_algorithm $IKE_ENC;
		hash_algorithm $IKE_AUTH;
		authentication_method pre_shared_key;
		dh_group $IKE_DHGROUP;
	}
}
EOF
              ;;
           X509)
	      cat >> /etc/racoon/$DST.conf << EOF
	my_identifier asn1dn;
	peers_identifier asn1dn;
	certificate_type x509 "$IKE_CERTFILE.public" "$IKE_CERTFILE.private";
EOF
	      if [ -n "$IKE_DNSSEC" ]; then
	          echo "        peers_certfile dnssec;" >> /etc/racoon/$DST.conf
	      fi
	      if [ -n "$IKE_PEER_CERTFILE" ]; then
	          echo "        peers_certfile x509 \"$IKE_PEER_CERTFILE.public\";" >> /etc/racoon/$DST.conf
	      fi
	      cat >> /etc/racoon/$DST.conf << EOF
        proposal {
	        encryption_algorithm $IKE_ENC;
		hash_algorithm $IKE_AUTH;
		authentication_method rsasig;
		dh_group $IKE_DHGROUP;
	}
}
EOF
              ;;
	   GSSAPI)
	      cat >> /etc/racoon/$DST.conf << EOF
	my_identifier address;
	proposal {
	        encryption_algorithm $IKE_ENC;
		hash_algorithm $IKE_AUTH;
		authentication_method gssapi_krb;
		dh_group $IKE_DHGROUP;
	}
}
EOF
         esac
    fi
    racoontmp=$(mktemp /etc/racoon/racoon.XXXXXX)
    grep -v "^include \"/etc/racoon/$DST.conf\";" /etc/racoon/racoon.conf >> $racoontmp
    echo "include \"/etc/racoon/$DST.conf\";" >> $racoontmp
    mv -f $racoontmp /etc/racoon/racoon.conf
fi
if [ "$KEYING" = "automatic" ]; then
    if ! pidof -x /usr/sbin/racoon > /dev/null 2>&1 ; then
       /usr/sbin/racoon
    elif [ -n "$IKE_METHOD" ]; then
	killall -HUP /usr/sbin/racoon
    fi
fi