#!/bin/bash # Network Interface Configuration System # Copyright (c) 1996-2010 Red Hat, Inc. all rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, # as published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA . /etc/init.d/functions cd /etc/sysconfig/network-scripts . ./network-functions [ -f ../network ] && . ../network CONFIG=${1} need_config "${CONFIG}" source_config if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then DYNCONFIG=true fi # load the module associated with that device # /sbin/modprobe ${REALDEVICE} is_available ${REALDEVICE} # bail out, if the MAC does not fit if [ -n "${HWADDR}" ]; then FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then net_log $"Device ${DEVICE} has different MAC address than expected, ignoring." exit 1 fi fi # If the device is a bridge, create it with brctl, if available. if [ "${TYPE}" = "Bridge" ]; then if [ ! -x /usr/sbin/brctl ]; then net_log $"Bridge support not available: brctl not found" exit 1 fi if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then /usr/sbin/brctl addbr ${DEVICE} || exit 1 fi [ -n "${DELAY}" ] && /usr/sbin/brctl setfd ${DEVICE} ${DELAY} [ -n "${STP}" ] && /usr/sbin/brctl stp ${DEVICE} ${STP} # add the bits to setup driver parameters here for arg in $BRIDGING_OPTS ; do key=${arg%%=*}; value=${arg##*=}; echo $value > /sys/class/net/${DEVICE}/bridge/$key done fi # If the device is a tap device, create it with tunctl, if available. if [ "${TYPE}" = "Tap" ]; then if [ ! -x /usr/sbin/tunctl ]; then net_log $"Tap support not available: tunctl not found" exit 1 fi [ -n "${OWNER}" ] && OWNER="-u ${OWNER}" /usr/sbin/tunctl ${OWNER} -t ${DEVICE} > /dev/null fi # now check the real state is_available ${REALDEVICE} || { if [ -n "$alias" ]; then net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." else net_log $"Device ${DEVICE} does not seem to be present, delaying initialization." fi exit 1 } # this isn't the same as the MAC in the configuration filename. It is # available as a configuration option in the config file, forcing the kernel # to think an ethernet card has a different MAC address than it really has. if [ -n "${MACADDR}" ]; then ip link set dev ${DEVICE} address ${MACADDR} fi if [ -n "${MTU}" ]; then ip link set dev ${DEVICE} mtu ${MTU} fi # is the device wireless? If so, configure wireless device specifics is_wireless_device ${DEVICE} && . ./ifup-wireless # slave device? if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then install_bonding_driver ${MASTER} grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || { /sbin/ip link set dev ${DEVICE} down echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null } ethtool_set exit 0 fi # Bonding initialization. For DHCP, we need to enslave the devices early, # so it can actually get an IP. if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then /sbin/ip link set dev ${DEVICE} down # add the bits to setup driver parameters here for arg in $BONDING_OPTS ; do key=${arg%%=*}; value=${arg##*=}; if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then OLDIFS=$IFS; IFS=','; for arp_ip in $value; do if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key fi done IFS=$OLDIFS; elif [ "${key}" = "arp_ip_target" ]; then if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then echo "$value" > /sys/class/net/${DEVICE}/bonding/$key fi elif [ "${key}" != "primary" ]; then echo $value > /sys/class/net/${DEVICE}/bonding/$key fi done /sbin/ip link set dev ${DEVICE} up [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} for device in $(LANG=C egrep -l "^[[:space:]]*MASTER=\"?${DEVICE}\"?[[:space:]]*$" /etc/sysconfig/network-scripts/ifcfg-*) ; do is_ignored_file "$device" && continue /sbin/ifup ${device##*/} done # add the bits to setup the needed post enslavement parameters for arg in $BONDING_OPTS ; do key=${arg%%=*}; value=${arg##*=}; if [ "${key}" = "primary" ]; then echo $value > /sys/class/net/${DEVICE}/bonding/$key fi done fi # If the device is part of a bridge, add the device to the bridge if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then /usr/sbin/brctl addbr ${BRIDGE} 2>/dev/null fi /sbin/ip addr flush dev ${DEVICE} 2>/dev/null /sbin/ip link set dev ${DEVICE} up ethtool_set [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} /usr/sbin/brctl addif ${BRIDGE} ${DEVICE} # add the bits to setup driver parameters here for arg in $BRIDGING_OPTS ; do key=${arg%%=*}; value=${arg##*=}; echo $value > /sys/class/net/${DEVICE}/brport/$key done # Upon adding a device to a bridge, # it's necessary to make radvd reload its config [ -r /var/run/radvd/radvd.pid ] && kill -HUP $(cat /var/run/radvd/radvd.pid) exit 0 fi if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then if [[ "${PERSISTENT_DHCLIENT}" = [yY1]* ]]; then ONESHOT=""; else ONESHOT="-1"; fi; generate_config_file_name generate_lease_file_name DHCLIENTARGS="${DHCLIENTARGS} -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient-${DEVICE}.pid" echo echo -n $"Determining IP information for ${DEVICE}..." if [[ "${PERSISTENT_DHCLIENT}" != [yY1]* ]] && check_link_down ${DEVICE}; then echo $" failed; no link present. Check cable?" exit 1 fi ethtool_set if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then echo $" done." else echo $" failed." exit 1 fi # end dynamic device configuration else if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then # enable device without IP, useful for e.g. PPPoE ip link set dev ${REALDEVICE} up ethtool_set [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} else expand_config [ -n "${ARP}" ] && \ ip link set dev ${REALDEVICE} $(toggle_value arp $ARP) if ! ip link set dev ${REALDEVICE} up ; then net_log $"Failed to bring up ${DEVICE}." exit 1 fi ethtool_set [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} if [ "${DEVICE}" = "lo" ]; then SCOPE="scope host" else SCOPE=${SCOPE:-} fi if [ -n "$SRCADDR" ]; then SRC="src $SRCADDR" else SRC= fi # set IP address(es) for idx in {0..256} ; do if [ -z "${ipaddr[$idx]}" ]; then break fi if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then [ "${REALDEVICE}" != "lo" ] && \ if ! /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]} ; then net_log $"Error, some other host already uses address ${ipaddr[$idx]}." exit 1 fi if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \ brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." fi fi if [ -n "$SRCADDR" ]; then sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1 fi # update ARP cache of neighboring computers if [ "${REALDEVICE}" != "lo" ]; then /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ( sleep 2; /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null & fi done # Set a default route. if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then # set up default gateway. replace if one already exists if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then ip route replace default ${METRIC:+metric $METRIC} \ via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \ ${GATEWAYDEV:+dev $GATEWAYDEV} || net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}." elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then ip route replace default ${METRIC:+metric $METRIC} \ ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} || net_log $"Erorr adding default gateway for ${REALDEVICE}." fi fi fi fi # Add Zeroconf route. if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link fi # IPv6 initialisation? /etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG} if [[ "${DHCPV6C}" = [Yy1]* ]] && [ -x /sbin/dhclient ]; then generate_config_file_name 6 generate_lease_file_name 6 /sbin/dhclient -6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient6-${DEVICE}.pid -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${DEVICE} fi if [ "${IPX}" = yes ]; then /etc/sysconfig/network-scripts/ifup-ipx ${DEVICE} fi exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2}