From c5917b856db1e32a863fa78b54d5a7533c99577a Mon Sep 17 00:00:00 2001 From: "David Kaspar [Dee'Kej]" Date: Tue, 21 Mar 2017 17:21:53 +0100 Subject: 9.70-sync: sysconfig/network-scripts/* updated - part 2 This commit contains a lot of whitespace changes. Use 'git diff --ignore-all-space' to display the relevant changes. --- sysconfig/network-scripts/ifdown | 10 +- sysconfig/network-scripts/ifdown-eth | 155 +-- sysconfig/network-scripts/ifdown-ipv6 | 125 +- sysconfig/network-scripts/ifdown-post | 38 +- sysconfig/network-scripts/ifdown-routes | 23 +- sysconfig/network-scripts/ifdown-sit | 8 +- sysconfig/network-scripts/ifup | 94 +- sysconfig/network-scripts/ifup-aliases | 489 +++---- sysconfig/network-scripts/ifup-eth | 331 ++--- sysconfig/network-scripts/ifup-ippp | 66 +- sysconfig/network-scripts/ifup-ipv6 | 377 +++--- sysconfig/network-scripts/ifup-plusb | 10 +- sysconfig/network-scripts/ifup-post | 149 +- sysconfig/network-scripts/ifup-routes | 41 +- sysconfig/network-scripts/ifup-sit | 34 +- sysconfig/network-scripts/ifup-wireless | 30 +- sysconfig/network-scripts/init.ipv6-global | 235 ++-- sysconfig/network-scripts/network-functions | 610 +++++---- sysconfig/network-scripts/network-functions-ipv6 | 1575 +++++++++++----------- 19 files changed, 2261 insertions(+), 2139 deletions(-) (limited to 'sysconfig') diff --git a/sysconfig/network-scripts/ifdown b/sysconfig/network-scripts/ifdown index 8cb82880..90b1c834 100755 --- a/sysconfig/network-scripts/ifdown +++ b/sysconfig/network-scripts/ifdown @@ -25,10 +25,10 @@ need_config "${CONFIG}" if [ $UID != 0 ]; then if [ -x /usr/sbin/usernetctl ]; then - source_config - if /usr/sbin/usernetctl ${CONFIG} report ; then - exec /usr/sbin/usernetctl ${CONFIG} down - fi + source_config + if /usr/sbin/usernetctl ${CONFIG} report ; then + exec /usr/sbin/usernetctl ${CONFIG} down + fi fi echo $"Users cannot control this device." >&2 exit 1 @@ -43,7 +43,7 @@ fi if [ "$_use_nm" = "true" ]; then if [ -n "$UUID" -a -z "$DEVICE" ]; then - DEVICE=$(nmcli -t --fields uuid,device con show --active | awk -F ':' "\$1 == \"$UUID\" { print \$2 }") + DEVICE=$(nmcli -t --fields uuid,device con show --active | awk -F ':' "\$1 == \"$UUID\" { print \$2 }") fi if [ -n "$DEVICE" ] && ! is_nm_device_unmanaged "$DEVICE" ; then if ! LC_ALL=C nmcli -t -f STATE,DEVICE dev status | egrep -q "^(failed|disconnected|unmanaged|unavailable):$DEVICE$"; then diff --git a/sysconfig/network-scripts/ifdown-eth b/sysconfig/network-scripts/ifdown-eth index cdf44f56..23038e54 100755 --- a/sysconfig/network-scripts/ifdown-eth +++ b/sysconfig/network-scripts/ifdown-eth @@ -36,50 +36,50 @@ if [ -n "${TEAM_MASTER}" ] && [ ! "${DEVICETYPE}" = "TeamPort" ] && [ -x ./ifdow fi if [ "${SLAVE}" != "yes" -o -z "${MASTER}" ]; then -if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then - FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) - if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then - NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR}) - if [ -n "${NEWCONFIG}" ]; then - eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG) - else - net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." - exit 1 - fi - if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then - exec /sbin/ifdown ${NEWCONFIG} - else - net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." - exit 1 - fi + if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then + FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) + if [ -n "${FOUNDMACADDR}" -a "${FOUNDMACADDR}" != "${HWADDR}" ]; then + NEWCONFIG=$(get_config_by_hwaddr ${FOUNDMACADDR}) + if [ -n "${NEWCONFIG}" ]; then + eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG) + else + net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." + exit 1 + fi + if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then + exec /sbin/ifdown ${NEWCONFIG} + else + net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring." + exit 1 + fi + fi fi fi -fi if is_bonding_device ${DEVICE} ; then - for device in $(LANG=C grep -l "^[[:space:]]*MASTER=\"\?${DEVICE}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do - is_ignored_file "$device" && continue - /sbin/ifdown ${device##*/} + for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do + is_ignored_file "$device" && continue + /sbin/ifdown ${device##*/} done for arg in $BONDING_OPTS ; do - key=${arg%%=*}; - [[ "${key}" != "arp_ip_target" ]] && continue - value=${arg##*=}; - if [ "${value:0:1}" != "" ]; then + key=${arg%%=*}; + [[ "${key}" != "arp_ip_target" ]] && continue + value=${arg##*=}; + if [ "${value:0:1}" != "" ]; then OLDIFS=$IFS; IFS=','; for arp_ip in $value; do - if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then + if grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/arp_ip_target; then echo "-$arp_ip" > /sys/class/net/${DEVICE}/bonding/arp_ip_target - fi + fi done IFS=$OLDIFS; - else - value=${value#+}; - if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then + else + value=${value#+}; + if grep -q $value /sys/class/net/${DEVICE}/bonding/arp_ip_target; then echo "-$value" > /sys/class/net/${DEVICE}/bonding/arp_ip_target - fi - fi + fi + fi done fi @@ -87,61 +87,66 @@ fi retcode=0 [ -n "$(pidof -x dhclient)" ] && { - for VER in "" 6 ; do - if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then - dhcpid=$(cat /var/run/dhclient$VER-${DEVICE}.pid) - generate_lease_file_name $VER - if [[ "$DHCPRELEASE" = [yY1]* ]]; then - /sbin/dhclient -r -lf ${LEASEFILE} -pf /var/run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1 - retcode=$? - else - kill $dhcpid >/dev/null 2>&1 - retcode=$? - reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script - fi - if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then - rm -f /var/run/dhclient$VER-${DEVICE}.pid - kill $dhcpid >/dev/null 2>&1 - fi - fi - done -} +for VER in "" 6 ; do + if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then + dhcpid=$(cat /var/run/dhclient$VER-${DEVICE}.pid) + generate_lease_file_name $VER + if is_true "$DHCPRELEASE"; then + /sbin/dhclient -r -lf ${LEASEFILE} -pf /var/run/dhclient$VER-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1 + retcode=$? + else + kill $dhcpid >/dev/null 2>&1 + retcode=$? + reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script + fi + if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then + rm -f /var/run/dhclient$VER-${DEVICE}.pid + kill $dhcpid >/dev/null 2>&1 + fi + fi +done +} # we can't just delete the configured address because that address # may have been changed in the config file since the device was # brought up. Flush all addresses associated with this # instance instead. if [ -d "/sys/class/net/${REALDEVICE}" ]; then - if [ "${REALDEVICE}" = "${DEVICE}" ]; then - ip addr flush dev ${REALDEVICE} scope global 2>/dev/null - else - ip addr flush dev ${REALDEVICE} label ${DEVICE} scope global 2>/dev/null - fi - - if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then - echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null - fi - - if [ "${REALDEVICE}" = "${DEVICE}" ]; then - ip link set dev ${DEVICE} down 2>/dev/null - fi + LABEL= + if [ "${REALDEVICE}" != "${DEVICE}" ]; then + LABEL="label ${DEVICE}" + fi + if [ "${REALDEVICE}" = "lo" ]; then + ip addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null + else + ip addr flush dev ${REALDEVICE} ${LABEL} scope global 2>/dev/null + ip -4 addr flush dev ${REALDEVICE} ${LABEL} scope host 2>/dev/null + fi + + if [ "${SLAVE}" = "yes" -a -n "${MASTER}" ]; then + echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null + fi + + if [ "${REALDEVICE}" = "${DEVICE}" ]; then + ip link set dev ${DEVICE} down 2>/dev/null + fi fi [ "$retcode" = "0" ] && retcode=$? if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then - /sbin/ip link set dev ${DEVICE} down - /usr/sbin/brctl delif -- ${BRIDGE} ${DEVICE} - # Upon removing a device from a bridge, - # it's necessary to make radvd reload its config - [ -r /var/run/radvd/radvd.pid ] && kill -HUP $(cat /var/run/radvd/radvd.pid) - if [ -d /sys/class/net/${BRIDGE}/brif ] && [ $(ls -1 /sys/class/net/${BRIDGE}/brif | wc -l) -eq 0 ]; then - /usr/sbin/brctl delbr -- ${BRIDGE} - fi + /sbin/ip link set dev ${DEVICE} down + /usr/sbin/brctl delif -- ${BRIDGE} ${DEVICE} + # Upon removing a device from a bridge, + # it's necessary to make radvd reload its config + [ -r /var/run/radvd/radvd.pid ] && kill -HUP $(cat /var/run/radvd/radvd.pid) + if [ -d /sys/class/net/${BRIDGE}/brif ] && [ $(ls -1 /sys/class/net/${BRIDGE}/brif | wc -l) -eq 0 ]; then + /usr/sbin/brctl delbr -- ${BRIDGE} + fi fi if [ "${TYPE}" = "Tap" ]; then - TUNMODE="mode tap" - [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" - ip tuntap del ${TUNMODE} dev ${DEVICE} >/dev/null + TUNMODE="mode tap" + [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" + ip tuntap del ${TUNMODE} dev ${DEVICE} >/dev/null fi if [ -n "${TEAM_CONFIG}" ] && [ ! "${DEVICETYPE}" = "Team" ] && [ -x ./ifdown-Team ]; then @@ -169,7 +174,7 @@ fi if [ -n "$VLAN" ]; then # 802.1q VLAN if [ -f /proc/net/vlan/${DEVICE} ]; then - ip link delete ${DEVICE} type vlan + ip link delete ${DEVICE} type vlan fi fi diff --git a/sysconfig/network-scripts/ifdown-ipv6 b/sysconfig/network-scripts/ifdown-ipv6 index d2207b76..c849d1fa 100755 --- a/sysconfig/network-scripts/ifdown-ipv6 +++ b/sysconfig/network-scripts/ifdown-ipv6 @@ -58,78 +58,81 @@ ipv6_test testonly || exit 0 # Test device status ipv6_test_device_status $DEVICE if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 1 + # device doesn't exist or other problem occurs + exit 1 fi -# Switch some sysctls to secure mode -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1 -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 +if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then + # Switch some sysctls to secure mode + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 +fi /sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1 # Test status of tun6to4 device ipv6_test_device_status tun6to4 if [ $? = 0 -o $? = 11 ]; then - # Device exists - valid6to4config="yes" - - if [ -z "$IPV6TO4_RELAY" ]; then - IPV6TO4_RELAY="192.88.99.1" - fi - - # Get IPv4 address from interface - if [ -n "$IPV6TO4_IPV4ADDR" ]; then - # Take special configured from config file (precedence 1) - ipv4addr="$IPV6TO4_IPV4ADDR" - - # Get IPv4 address from interface first - ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addrlocal" ]; then - # Take configured from config file - ipv4addrlocal="$IPADDR" - fi - else - # Get IPv4 address from interface first (has precedence 2) - ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addr" ]; then - # Take configured from config file (precedence 3) - ipv4addr="$IPADDR" - fi - ipv4addrlocal="$ipv4addr" - fi - - # Get local IPv4 address of dedicated tunnel - ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)" - - if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then - # no IPv4 addresses given, 6to4 sure not configured - valid6to4config="no" - else - # Check against configured 6to4 tunnel to see if this interface was used before - if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then - # IPv4 address of interface does't match local tunnel address, interface was not used for current 6to4 setup - valid6to4config="no" - fi - fi - + # Device exists + valid6to4config="yes" + + if [ -z "$IPV6TO4_RELAY" ]; then + IPV6TO4_RELAY="192.88.99.1" + fi + + # Get IPv4 address from interface + if [ -n "$IPV6TO4_IPV4ADDR" ]; then + # Take special configured from config file (precedence 1) + ipv4addr="$IPV6TO4_IPV4ADDR" + + # Get IPv4 address from interface first + ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" + if [ -z "$ipv4addrlocal" ]; then + # Take configured from config file + ipv4addrlocal="$IPADDR" + fi + else + # Get IPv4 address from interface first (has precedence 2) + ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" + if [ -z "$ipv4addr" ]; then + # Take configured from config file (precedence 3) + ipv4addr="$IPADDR" + fi + ipv4addrlocal="$ipv4addr" + fi + + # Get local IPv4 address of dedicated tunnel + ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)" + + if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then + # no IPv4 addresses given, 6to4 sure not configured + valid6to4config="no" + else + # Check against configured 6to4 tunnel to see if this interface was + # used before + if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then + # IPv4 address of interface does't match local tunnel address, + # interface was not used for current 6to4 setup + valid6to4config="no" + fi + fi fi # Shutdown of 6to4, if configured if [ "$valid6to4config" = "yes" ]; then - if [ -n "$IPV6TO4_ROUTING" ]; then - # Delete routes to local networks - for devsuf in $IPV6TO4_ROUTING; do - dev="${devsuf%%-*}" - ipv6_cleanup_6to4_device $dev - done - fi - - # Delete all configured 6to4 address - ipv6_cleanup_6to4_tunnels tun6to4 - - # Control running radvd - ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE + if [ -n "$IPV6TO4_ROUTING" ]; then + # Delete routes to local networks + for devsuf in $IPV6TO4_ROUTING; do + dev="${devsuf%%-*}" + ipv6_cleanup_6to4_device $dev + done + fi + + # Delete all configured 6to4 address + ipv6_cleanup_6to4_tunnels tun6to4 + + # Control running radvd + ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE fi # Delete all current configured IPv6 addresses on this interface diff --git a/sysconfig/network-scripts/ifdown-post b/sysconfig/network-scripts/ifdown-post index 0f2285fc..8b56e14f 100755 --- a/sysconfig/network-scripts/ifdown-post +++ b/sysconfig/network-scripts/ifdown-post @@ -19,32 +19,34 @@ source_config /etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} ${DEVNAME} if [ "$PEERDNS" != "no" -o -n "$RESOLV_MODS" -a "$RESOLV_MODS" != "no" ] && \ - [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" -o -n "${DNS1}" -o "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ] ; then - if [ -f /etc/resolv.conf.save ]; then - change_resolv_conf /etc/resolv.conf.save - rm -f /etc/resolv.conf.save - fi - if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then - if [ -f /etc/ppp/peers/$DEVICE ] ; then - rm -f /etc/ppp/peers/$DEVICE - fi + [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" -o -n "${DNS1}" \ + -o "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ] ; then +if [ -f /etc/resolv.conf.save ]; then + change_resolv_conf /etc/resolv.conf.save + rm -f /etc/resolv.conf.save +fi +if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then + if [ -f /etc/ppp/peers/$DEVICE ] ; then + rm -f /etc/ppp/peers/$DEVICE fi fi +fi # Reset the default route if this interface had a special one if ! check_default_route ; then # ISDN device needs special handling dial on demand - if [ "${DEVICETYPE}" = "ippp" -o "${DEVICETYPE}" = "isdn" ] && [ "$DIALMODE" = "auto" ] ; then - if [ -z "$GATEWAY" ] ; then - /sbin/ip route add default ${METRIC:+metric} \ - ${WINDOW:+window $WINDOW} dev ${DEVICE} - else - /sbin/ip route add default ${METRIC:+metric} \ - ${WINDOW:+window $WINDOW} via ${GATEWAY} - fi + if [ "${DEVICETYPE}" = "ippp" -o "${DEVICETYPE}" = "isdn" ] && \ + [ "$DIALMODE" = "auto" ] ; then + if [ -z "$GATEWAY" ] ; then + /sbin/ip route add default ${METRIC:+metric} \ + ${WINDOW:+window $WINDOW} dev ${DEVICE} else - add_default_route ${DEVICE} + /sbin/ip route add default ${METRIC:+metric} \ + ${WINDOW:+window $WINDOW} via ${GATEWAY} fi +else + add_default_route ${DEVICE} +fi fi # Inform firewall diff --git a/sysconfig/network-scripts/ifdown-routes b/sysconfig/network-scripts/ifdown-routes index 0109404f..1d1549dc 100755 --- a/sysconfig/network-scripts/ifdown-routes +++ b/sysconfig/network-scripts/ifdown-routes @@ -1,6 +1,7 @@ #! /bin/bash # # Drops static routes which go through device $1 + if [ -z "$1" ]; then echo $"usage: ifdown-routes []" exit 1 @@ -18,15 +19,15 @@ if [ -n "$2" -a "$2" != "$1" ]; then fi for file in $FILES; do - if [ -f "$file" ]; then - proto= - if [ "$file" != "${file##*/rule6-}" ]; then - proto="-6" - fi - { cat "$file" ; echo ; } | while read line; do - if [[ ! "$line" =~ $MATCH ]]; then - /sbin/ip $proto rule del $line - fi - done - fi + if [ -f "$file" ]; then + proto= + if [ "$file" != "${file##*/rule6-}" ]; then + proto="-6" + fi + { cat "$file" ; echo ; } | while read line; do + if [[ ! "$line" =~ $MATCH ]]; then + /sbin/ip $proto rule del $line + fi + done + fi done diff --git a/sysconfig/network-scripts/ifdown-sit b/sysconfig/network-scripts/ifdown-sit index e4d07345..37d100e6 100755 --- a/sysconfig/network-scripts/ifdown-sit +++ b/sysconfig/network-scripts/ifdown-sit @@ -37,8 +37,8 @@ REALDEVICE=${DEVICE%%:*} # Generic tunnel device sit0 is not supported here if [ "$DEVICE" = "sit0" ]; then - net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" - exit 1 + net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" + exit 1 fi # IPv6 test, no module loaded, exit if system is not IPv6-ready @@ -47,8 +47,8 @@ ipv6_test testonly || exit 0 # Test device status ipv6_test_device_status $DEVICE if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 0 + # device doesn't exist or other problem occurs + exit 0 fi # Cleanup additional static routes diff --git a/sysconfig/network-scripts/ifup b/sysconfig/network-scripts/ifup index f1678eb3..e06fafb9 100755 --- a/sysconfig/network-scripts/ifup +++ b/sysconfig/network-scripts/ifup @@ -41,10 +41,10 @@ need_config "${CONFIG}" if [ ${UID} != 0 ]; then if [ -x /usr/sbin/usernetctl ]; then - source_config - if /usr/sbin/usernetctl ${CONFIG} report ; then - exec /usr/sbin/usernetctl ${CONFIG} up - fi + source_config + if /usr/sbin/usernetctl ${CONFIG} report ; then + exec /usr/sbin/usernetctl ${CONFIG} up + fi fi echo $"Users cannot control this device." >&2 exit 1 @@ -89,56 +89,56 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ] && [ -n "$DEVICE" ]; then PHYSDEV=${DEVICE%.*} fi MATCH='^vlan[0-9]{1,4}?' - if [[ "${DEVICE}" =~ $MATCH ]]; then - VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//') - # PHYSDEV should be set in ifcfg-vlan* file - if test -z "$PHYSDEV"; then + if [[ "${DEVICE}" =~ $MATCH ]]; then + VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//') + # PHYSDEV should be set in ifcfg-vlan* file + if test -z "$PHYSDEV"; then net_log $"PHYSDEV should be set for device ${DEVICE}" exit 1 - fi + fi fi fi if [ -n "$VID" ]; then - if [ ! -d /proc/net/vlan ]; then + if [ ! -d /proc/net/vlan ]; then if ! modprobe 8021q >/dev/null 2>&1 ; then - net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}" - exit 1 - fi - fi - - is_available_wait ${PHYSDEV} ${DEVTIMEOUT} || { - if [ "$?" = "1" ] ; then - net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." - exit 1 - else - exit 0 - fi - } - - # Link on Physical device needs to be up but no ip required - check_device_down ${PHYSDEV} && { - ip -o link set dev ${PHYSDEV} up - } - - if [ ! -f /proc/net/vlan/${DEVICE} ]; then - if [ "${REORDER_HDR}" = "no" -o "${REORDER_HDR}" = "0" ]; then - FLAG_REORDER_HDR="reorder_hdr off" - fi - - if [ "${GVRP}" = "yes" -o "${GVRP}" = "1" ]; then - FLAG_GVRP="gvrp on" - fi - - ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || { - (/usr/bin/logger -p daemon.info -t ifup \ - $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &)& - net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" - exit 1 - } - fi + net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}" + exit 1 + fi + fi + + is_available_wait ${PHYSDEV} ${DEVTIMEOUT} || { + if [ "$?" = "1" ] ; then + net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." + exit 1 + else + exit 0 + fi + } + + # Link on Physical device needs to be up but no ip required + check_device_down ${PHYSDEV} && { ip -o link set dev ${PHYSDEV} up; } + + if [ ! -f /proc/net/vlan/${DEVICE} ]; then + if [ "${REORDER_HDR}" = "no" -o "${REORDER_HDR}" = "0" ]; then + FLAG_REORDER_HDR="reorder_hdr off" + fi + + if [ "${GVRP}" = "yes" -o "${GVRP}" = "1" ]; then + FLAG_GVRP="gvrp on" + fi + + ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || { + (/usr/bin/logger -p daemon.info -t ifup \ + $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &) & + net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" + exit 1 + } + fi fi - /usr/lib/systemd/systemd-sysctl --prefix "/proc/sys/net/ipv4/conf/${DEVICE}" --prefix "/proc/sys/net/ipv6/conf/${DEVICE}" + /usr/lib/systemd/systemd-sysctl \ + --prefix "/proc/sys/net/ipv4/conf/${DEVICE}" \ + --prefix "/proc/sys/net/ipv6/conf/${DEVICE}" fi if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then @@ -160,5 +160,3 @@ if [ ! -x ${OTHERSCRIPT} ]; then fi exec ${OTHERSCRIPT} ${CONFIG} $2 - - diff --git a/sysconfig/network-scripts/ifup-aliases b/sysconfig/network-scripts/ifup-aliases index 279a16a6..fbc15470 100755 --- a/sysconfig/network-scripts/ifup-aliases +++ b/sysconfig/network-scripts/ifup-aliases @@ -64,8 +64,8 @@ TEXTDOMAINDIR=/etc/locale device=$1 if [ "$device" = "" ]; then - echo $"usage: ifup-aliases []\n" - exit 1 + echo $"usage: ifup-aliases []\n" + exit 1 fi PARENTCONFIG=${2:-ifcfg-$device} @@ -87,276 +87,293 @@ cd /etc/sysconfig/network-scripts # A list of all the devices is created in rdev_LIST. eval $( ip addr show $device label $device:* | \ - awk 'BEGIN { COUNT=0;LAST_DEV="" } /inet / { -# Split IP address into address/prefix - split($2,IPADDR,"/"); -# Create A_B_C_D IP address form - IP_ADDR=IPADDR[1]; - gsub(/\./,"_",IP_ADDR); -# Split device into device:index - split($NF,DEV,":"); -# Update last device - LAST_DEV=LAST_DEV " " DEV[2]; - printf("rdev_%s_addr=%s\nrdevip_%s=%s\nrdev_%s_pb=%s_%s\nrdev_LIST=\"%s\"\n", - DEV[2],IPADDR[1],IP_ADDR,DEV[2],DEV[2],IPADDR[2],$4,LAST_DEV); - } END { - if(LAST_DEV == "") print "no_devices_are_up=yes" - }' ); - - # - # Store configuration of the parent device and network - # + awk 'BEGIN { COUNT=0;LAST_DEV="" } /inet / { + # Split IP address into address/prefix + split($2,IPADDR,"/"); + # Create A_B_C_D IP address form + IP_ADDR=IPADDR[1]; + gsub(/\./,"_",IP_ADDR); + # Split device into device:index + split($NF,DEV,":"); + # Update last device + LAST_DEV=LAST_DEV " " DEV[2]; + printf("rdev_%s_addr=%s\nrdevip_%s=%s\nrdev_%s_pb=%s_%s\nrdev_LIST=\"%s\"\n", + DEV[2],IPADDR[1],IP_ADDR,DEV[2],DEV[2],IPADDR[2],$4,LAST_DEV); + } END { + if(LAST_DEV == "") print "no_devices_are_up=yes" + }' ); + +# +# Store configuration of the parent device and network +# # read from the /etc/sysconfig/network eval ` ( - . /etc/sysconfig/network; - echo network_GATEWAY=$GATEWAY\;; - echo network_GATEWAYDEV=$GATEWAYDEV\;; + . /etc/sysconfig/network; + echo network_GATEWAY=$GATEWAY\;; + echo network_GATEWAYDEV=$GATEWAYDEV\;; ) ` # read defaults from the parent config file [ -f $PARENTCONFIG ] || { - net_log $"Missing config file $PARENTCONFIG." - exit 1 + net_log $"Missing config file $PARENTCONFIG." + exit 1 } eval ` ( - . ./$PARENTCONFIG; - echo default_PREFIX=$PREFIX\;; - echo default_NETMASK=$NETMASK\;; - echo default_BROADCAST=$BROADCAST\;; - echo default_GATEWAY=$GATEWAY\;; - echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;; - echo default_ARPCHECK=$ARPCHECK\;; + . ./$PARENTCONFIG; + echo default_PREFIX=$PREFIX\;; + echo default_NETMASK=$NETMASK\;; + echo default_BROADCAST=$BROADCAST\;; + echo default_GATEWAY=$GATEWAY\;; + echo default_NO_ALIASROUTING=$NO_ALIASROUTING\;; + echo default_ARPCHECK=$ARPCHECK\;; ) ` [ -z "$default_GATEWAY" ] && default_GATEWAY=$network_GATEWAY function ini_env () { - DEVICE="" - IPADDR="" - PREFIX=$default_PREFIX - NETMASK=$default_NETMASK - BROADCAST=$default_BROADCAST - GATEWAY=$default_GATEWAY - NO_ALIASROUTING=$default_NO_ALIASROUTING - ONPARENT="" - ARPCHECK=$default_ARPCHECK + DEVICE="" + IPADDR="" + IPV6ADDR="" + PREFIX=$default_PREFIX + NETMASK=$default_NETMASK + BROADCAST=$default_BROADCAST + GATEWAY=$default_GATEWAY + NO_ALIASROUTING=$default_NO_ALIASROUTING + ONPARENT="" + ARPCHECK=$default_ARPCHECK } function is_default_gateway () { - LC_ALL=C /sbin/ip route ls default scope global \ - | awk '$3 == "'"$1"'" { found = 1; } END { exit found == 0; }' + LC_ALL=C /sbin/ip route ls default scope global \ + | awk '$3 == "'"$1"'" { found = 1; } END { exit found == 0; }' } - # - # Read the alias configuration files and enable each aliased - # device using new_interface() - # +# +# Read the alias configuration files and enable each aliased +# device using new_interface() +# function new_interface () { - ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.}; - IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}"; - DEVNUM=${DEVICE#*:} - - MATCH='^[0-9A-Za-z_]*$' - if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then - net_log $"error in $FILE: invalid alias number" - return 1 - fi - - eval " - ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM}; - ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE; - "; - - if [ -n "$ipseen" ]; then - net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" - return 1 - fi - - if [ -n "$devseen" ]; then - net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" - return 1 - fi - - if [ -z "$DEVICE" -o -z "$IPADDR" ]; then - net_log $"error in $FILE: didn't specify device or ipaddr" - return 1 - fi - - if [ -z "$NETMASK" -a -z "$PREFIX" ]; then - net_log $"error iN $FILE: didn't specify netmask or prefix" - fi - - if [ -z "$PREFIX" ]; then - eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) - fi - - if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then - eval $(/bin/ipcalc --broadcast ${IPADDR}/${PREFIX}) - fi - - if [ "$no_devices_are_up" = "yes" ]; then - setup_this=yes - else - - setup_this="" - - eval " - rdev_addr=\$rdev_${DEVNUM}_addr; - rdev_pb=\$rdev_${DEVNUM}_pb; - rdev_mark=\$rdev_${DEVNUM}_mark; - rdevip=\$rdevip_${IPGLOP}; - "; - - if [ -n "$rdev_addr" ]; then - if [ "$rdev_addr" = "${IPADDR}" ]; then - newmark=keep - if [ "$rdev_pb" != "${PREFIX}_${BROADCAST}" ]; then - setup_this=freshen - else - setup_this=no - fi - else - if [ "$rdev_mark" != "remove" ]; then - /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} - do_netreport=yes - fi - newmark=remove - setup_this=yes - fi - if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then - net_log $"error in ifcfg-${parent_device}: files" - return 1 - fi - eval " rdev_${DEVNUM}_mark=\$newmark "; - else - setup_this=yes - fi - - if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then - eval " mark_remove=\$rdev_${rdevip}_mark "; - if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then - net_log $"error in ifcfg-${parent_device}: files" - return 1 - fi - if [ "$mark_remove" != "remove" ]; then - eval " rdev_${rdevip}_mark=remove "; - /sbin/ip addr flush dev $parent_device label $parent_device:$rdevip - do_netreport=yes - fi - fi - - fi - - if [ "$setup_this" = "freshen" ] ; then - # we can do the freshen stuff right now - /sbin/ip addr change ${IPADDR}/${PREFIX} brd ${BROADCAST} - fi - - if [ "$setup_this" = "yes" ] ; then - if [ "${parent_device}" != "lo" ] && [ "${ARPCHECK}" != "no" ] && \ - is_available ${parent_device} && \ - ( grep -qswi "up" /sys/class/net/${parent_device}/operstate || grep -qswi "1" /sys/class/net/${parent_device}/carrier ) ; then - echo $"Determining if ip address ${IPADDR} is already in use for device ${parent_device}..." - /sbin/arping -q -c 2 -w ${ARPING_WAIT:-3} -D -I ${parent_device} ${IPADDR} - if [ $? = 1 ]; then - net_log $"Error, some other host already uses address ${IPADDR}." - return 1 - fi - fi - - /sbin/ip addr add ${IPADDR}/${PREFIX} brd ${BROADCAST} dev ${parent_device} label ${DEVICE} - - [[ "$IPV6INIT" != [nN0]* ]] && /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE} - - if [ "$NO_ALIASROUTING" != yes ]; then - - GATEWAYDEV=$network_GATEWAYDEV; - - if [ -n "${GATEWAY}" -a \ - \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then - # set up default gateway, if it isn't already there - if ! is_default_gateway "$GATEWAY"; then - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} - fi - fi - - /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME} - - do_netreport=yes - ifuplocal_queue="$ifuplocal_queue $DEVICE" - - fi - - fi - + ipa=$IPADDR; ipb=${ipa#*.}; ipc=${ipb#*.}; + IPGLOP="${ipa%%.*}_${ipb%%.*}_${ipc%%.*}_${ipc#*.}"; + DEVNUM=${DEVICE#*:} + + MATCH='^[0-9A-Za-z_]*$' + if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then + net_log $"error in $FILE: invalid alias number" + return 1 + fi + + eval " + ipseen=\$ipseen_${IPGLOP}; devseen=\$devseen_${DEVNUM}; + ipseen_${IPGLOP}=$FILE; devseen_${DEVNUM}=$FILE; + "; + + if [ -n "$ipseen" ]; then + net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" + return 1 + fi + + if [ -n "$devseen" ]; then + net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" + return 1 + fi + + if [ -z "$DEVICE" -o -z "$IPADDR" ]; then + if [ -n "$IPV6ADDR" -a -n "$DEVICE" ] && ! is_false "$IPV6INIT"; then + /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE} + return $? + fi + net_log $"error in $FILE: didn't specify device or ipaddr" + return 1 + fi + + if [ -z "$NETMASK" -a -z "$PREFIX" ]; then + net_log $"error iN $FILE: didn't specify netmask or prefix" + fi + + if [ -z "$PREFIX" ]; then + eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) + fi + + if [ -z "$BROADCAST" -o "$BROADCAST" = "$default_BROADCAST" ]; then + eval $(/bin/ipcalc --broadcast ${IPADDR}/${PREFIX}) + fi + + if [ "$no_devices_are_up" = "yes" ]; then + setup_this=yes + else + + setup_this="" + + eval " + rdev_addr=\$rdev_${DEVNUM}_addr; + rdev_pb=\$rdev_${DEVNUM}_pb; + rdev_mark=\$rdev_${DEVNUM}_mark; + rdevip=\$rdevip_${IPGLOP}; + "; + + if [ -n "$rdev_addr" ]; then + if [ "$rdev_addr" = "${IPADDR}" ]; then + newmark=keep + if [ "$rdev_pb" != "${PREFIX}_${BROADCAST}" ]; then + setup_this=freshen + else + setup_this=no + fi + else + if [ "$rdev_mark" != "remove" ]; then + /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} + do_netreport=yes + fi + newmark=remove + setup_this=yes + fi + if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then + net_log $"error in ifcfg-${parent_device}: files" + return 1 + fi + eval " rdev_${DEVNUM}_mark=\$newmark "; + else + setup_this=yes + fi + + if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then + eval " mark_remove=\$rdev_${rdevip}_mark "; + if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then + net_log $"error in ifcfg-${parent_device}: files" + return 1 + fi + if [ "$mark_remove" != "remove" ]; then + eval " rdev_${rdevip}_mark=remove "; + /sbin/ip addr flush dev $parent_device label $parent_device:$rdevip + do_netreport=yes + fi + fi + + fi + + if [ "$setup_this" = "freshen" ] ; then + # we can do the freshen stuff right now + /sbin/ip addr change ${IPADDR}/${PREFIX} brd ${BROADCAST} + fi + + if [ "$setup_this" = "yes" ] ; then + if [ "${parent_device}" != "lo" ] && [ "${ARPCHECK}" != "no" ] && \ + is_available ${parent_device} && \ + ( grep -qswi "up" /sys/class/net/${parent_device}/operstate || grep -qswi "1" /sys/class/net/${parent_device}/carrier ) ; then + echo $"Determining if ip address ${IPADDR} is already in use for device ${parent_device}..." + ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${parent_device} ${IPADDR}) + if [ $? = 1 ]; then + ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p') + net_log $"Error, some other host ($ARPINGMAC) already uses address ${IPADDR}." + return 1 + fi + fi + + /sbin/ip addr add ${IPADDR}/${PREFIX} brd ${BROADCAST} \ + dev ${parent_device} label ${DEVICE} + + # update ARP cache of neighboring computers: + if [ "${REALDEVICE}" != "lo" ]; then + /sbin/arping -q -A -c 1 -I ${parent_device} ${IPADDR} + ( sleep 2; /sbin/arping -q -U -c 1 -I ${parent_device} ${IPADDR} ) > /dev/null 2>&1 < /dev/null & + fi + + ! is_false "$IPV6INIT" && \ + /etc/sysconfig/network-scripts/ifup-ipv6 ${DEVICE} + + if [ "$NO_ALIASROUTING" != yes ]; then + + GATEWAYDEV=$network_GATEWAYDEV; + + if [ -n "${GATEWAY}" -a \ + \( -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${DEVICE}" \) ]; then + # set up default gateway, if it isn't already there + if ! is_default_gateway "$GATEWAY"; then + ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} dev ${DEVICE} + fi + fi + + /etc/sysconfig/network-scripts/ifup-routes ${DEVICE} ${NAME} + + do_netreport=yes + ifuplocal_queue="$ifuplocal_queue $DEVICE" + fi + fi } -if [ "$BASH_VERSINFO" ]; then shopt -s nullglob; else allow_null_glob_expansion=foo; fi +if [ "$BASH_VERSINFO" ]; then + shopt -s nullglob +else + allow_null_glob_expansion=foo +fi for FILE in ifcfg-${parent_device}:* ; do - is_ignored_file "$FILE" && continue - ini_env; - . ./$FILE; - [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-} - [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface; - unset DEVICE + is_ignored_file "$FILE" && continue + ini_env + . ./$FILE + [ -z "$DEVICE" ] && DEVICE=${FILE##ifcfg-} + [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface + unset DEVICE done for FILE in ifcfg-${parent_device}-range* ; do - is_ignored_file "$FILE" && continue - ini_env; - . ./$FILE; - - ipaddr_prefix=${IPADDR_START%.*} - ipaddr_startnum=${IPADDR_START##*.} - ipaddr_endnum=${IPADDR_END##*.} - - if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then - net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree"; continue - fi - - if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then - net_log $"error in $FILE: IPADDR_START greater than IPADDR_END"; continue - fi - - ipaddr_num=$ipaddr_startnum - ipaddr_clonenum=$CLONENUM_START - - while [ $ipaddr_num -le $ipaddr_endnum ]; do - IPADDR="$ipaddr_prefix.$ipaddr_num" - DEVICE="$parent_device:$ipaddr_clonenum" - [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface; - ipaddr_num=$(($ipaddr_num+1)) - ipaddr_clonenum=$(($ipaddr_clonenum+1)) - done - + is_ignored_file "$FILE" && continue + ini_env + . ./$FILE + + ipaddr_prefix=${IPADDR_START%.*} + ipaddr_startnum=${IPADDR_START##*.} + ipaddr_endnum=${IPADDR_END##*.} + + if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then + net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree" + continue + fi + + if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then + net_log $"error in $FILE: IPADDR_START greater than IPADDR_END" + continue + fi + + ipaddr_num=$ipaddr_startnum + ipaddr_clonenum=$CLONENUM_START + + while [ $ipaddr_num -le $ipaddr_endnum ]; do + IPADDR="$ipaddr_prefix.$ipaddr_num" + DEVICE="$parent_device:$ipaddr_clonenum" + IPV6INIT="no" + [ "$ONPARENT" != "no" -a "$ONPARENT" != "NO" ] && new_interface + ipaddr_num=$(($ipaddr_num+1)) + ipaddr_clonenum=$(($ipaddr_clonenum+1)) + done done - # - # Remove any devices that should not be around - # - for DEVNUM in $rdev_LIST ; do - eval " rdev_mark=\$rdev_${DEVNUM}_mark "; - if [ -z "$rdev_mark" ]; then - /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} - do_netreport=yes - fi - done - # - # Notify of new device creation - # +# +# Remove any devices that should not be around +# +for DEVNUM in $rdev_LIST ; do + eval " rdev_mark=\$rdev_${DEVNUM}_mark " + if [ -z "$rdev_mark" ]; then + /sbin/ip addr flush dev $parent_device label $parent_device:${DEVNUM} + do_netreport=yes + fi +done +# +# Notify of new device creation +# if [ -n "$do_netreport" ]; then - do_netreport + do_netreport fi if [ -x /sbin/ifup-local ]; then - for DEVICE in $ifuplocal_queue ; do - /sbin/ifup-local ${DEVICE} - done + for DEVICE in $ifuplocal_queue ; do + /sbin/ifup-local ${DEVICE} + done fi diff --git a/sysconfig/network-scripts/ifup-eth b/sysconfig/network-scripts/ifup-eth index ebcfd9cb..7f21477c 100755 --- a/sysconfig/network-scripts/ifup-eth +++ b/sysconfig/network-scripts/ifup-eth @@ -40,49 +40,49 @@ is_available ${REALDEVICE} if [ -n "${HWADDR}" ]; then FOUNDMACADDR=$(get_hwaddr ${REALDEVICE}) if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then - net_log $"Device ${DEVICE} has different MAC address than expected, ignoring." - exit 1 + net_log $"Device ${DEVICE} has different MAC address than expected, ignoring." + exit 1 fi fi # If the device is a bridge, create it with brctl, if available. if [ "${TYPE}" = "Bridge" ]; then - if [ ! -x /usr/sbin/brctl ]; then - net_log $"Bridge support not available: brctl not found" - exit 1 - fi - if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then - /usr/sbin/brctl addbr -- ${DEVICE} || exit 1 - fi - [ -n "${DELAY}" ] && /usr/sbin/brctl setfd -- ${DEVICE} ${DELAY} - [ -n "${STP}" ] && /usr/sbin/brctl stp -- ${DEVICE} ${STP} - [ -n "${PRIO}" ] && /usr/sbin/brctl setbridgeprio ${DEVICE} ${PRIO} - [ -n "${AGEING}" ] && /usr/sbin/brctl setageing ${DEVICE} ${AGEING} - # add the bits to setup driver parameters here - for arg in $BRIDGING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - if [ "${key}" != "multicast_router" -a "${key}" != "hash_max" -a "${key}" != "multicast_snooping" ]; then - echo $value > /sys/class/net/${DEVICE}/bridge/$key - fi - done - # set LINKDELAY (used as timeout when calling check_link_down()) - # to at least (${DELAY} * 2) + 7 if STP is enabled. This is the - # minimum time required for /sys/class/net/$REALDEVICE/carrier to - # become 1 after "ip link set dev $DEVICE up" is called. - if [ "${STP}" = "yes" -o "${STP}" = "on" ]; then - TMPD=7 - [ -n "${DELAY}" ] && TMPD=$(expr ${DELAY} \* 2 + ${TMPD}) - [ 0$LINKDELAY -lt $TMPD ] && LINKDELAY=$TMPD - fi + if [ ! -x /usr/sbin/brctl ]; then + net_log $"Bridge support not available: brctl not found" + exit 1 + fi + if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then + /usr/sbin/brctl addbr -- ${DEVICE} || exit 1 + fi + [ -n "${DELAY}" ] && /usr/sbin/brctl setfd -- ${DEVICE} ${DELAY} + [ -n "${STP}" ] && /usr/sbin/brctl stp -- ${DEVICE} ${STP} + [ -n "${PRIO}" ] && /usr/sbin/brctl setbridgeprio ${DEVICE} ${PRIO} + [ -n "${AGEING}" ] && /usr/sbin/brctl setageing ${DEVICE} ${AGEING} + # add the bits to setup driver parameters here + for arg in $BRIDGING_OPTS ; do + key=${arg%%=*}; + value=${arg##*=}; + if [ "${key}" != "multicast_router" -a "${key}" != "hash_max" -a "${key}" != "multicast_snooping" ]; then + echo $value > /sys/class/net/${DEVICE}/bridge/$key + fi + done + # set LINKDELAY (used as timeout when calling check_link_down()) + # to at least (${DELAY} * 2) + 7 if STP is enabled. This is the + # minimum time required for /sys/class/net/$REALDEVICE/carrier to + # become 1 after "ip link set dev $DEVICE up" is called. + if [ "${STP}" = "yes" -o "${STP}" = "on" ]; then + TMPD=7 + [ -n "${DELAY}" ] && TMPD=$(expr ${DELAY} \* 2 + ${TMPD}) + [ 0$LINKDELAY -lt $TMPD ] && LINKDELAY=$TMPD + fi fi # Create tap device. if [ "${TYPE}" = "Tap" ]; then - [ -n "${OWNER}" ] && OWNER="user ${OWNER}" - TUNMODE="mode tap" - [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" - ip tuntap add ${TUNMODE} ${OWNER} dev ${DEVICE} > /dev/null + [ -n "${OWNER}" ] && OWNER="user ${OWNER}" + TUNMODE="mode tap" + [[ ${DEVICE} == tun* ]] && TUNMODE="mode tun" + ip tuntap add ${TUNMODE} ${OWNER} dev ${DEVICE} > /dev/null fi # Team master initialization. @@ -92,12 +92,12 @@ fi # now check the real state is_available_wait ${REALDEVICE} ${DEVTIMEOUT} || { - if [ -n "$alias" ]; then - net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." - else - net_log $"Device ${DEVICE} does not seem to be present, delaying initialization." - fi - exit 1 + if [ -n "$alias" ]; then + net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization." + else + net_log $"Device ${DEVICE} does not seem to be present, delaying initialization." + fi + exit 1 } @@ -105,10 +105,10 @@ is_available_wait ${REALDEVICE} ${DEVTIMEOUT} || { # available as a configuration option in the config file, forcing the kernel # to think an ethernet card has a different MAC address than it really has. if [ -n "${MACADDR}" ]; then - ip link set dev ${DEVICE} address ${MACADDR} + ip link set dev ${DEVICE} address ${MACADDR} fi if [ -n "${MTU}" ]; then - ip link set dev ${DEVICE} mtu ${MTU} + ip link set dev ${DEVICE} mtu ${MTU} fi # is the device wireless? If so, configure wireless device specifics @@ -125,8 +125,8 @@ fi if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then install_bonding_driver ${MASTER} grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null || { - /sbin/ip link set dev ${DEVICE} down - echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null + /sbin/ip link set dev ${DEVICE} down + echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null } ethtool_set @@ -138,9 +138,9 @@ fi if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then install_bonding_driver ${DEVICE} /sbin/ip link set dev ${DEVICE} up - for device in $(LANG=C grep -l "^[[:space:]]*MASTER=\"\?${DEVICE}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do - is_ignored_file "$device" && continue - /sbin/ifup ${device##*/} || net_log "Unable to start slave device ${device##*/} for master ${DEVICE}." warning + for device in $(LANG=C grep -l "^[[:space:]]*MASTER=['\"]\?${DEVICE}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-*) ; do + is_ignored_file "$device" && continue + /sbin/ifup ${device##*/} || net_log "Unable to start slave device ${device##*/} for master ${DEVICE}." warning done [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} @@ -149,150 +149,161 @@ if [ "$ISALIAS" = no ] && is_bonding_device ${DEVICE} ; then for arg in $BONDING_OPTS ; do key=${arg%%=*}; value=${arg##*=}; - if [ "${key}" = "primary" ]; then + if [ "${key}" = "primary" ]; then echo $value > /sys/class/net/${DEVICE}/bonding/$key - fi + fi done fi # If the device is part of a bridge, add the device to the bridge if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then - if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then - /usr/sbin/brctl addbr -- ${BRIDGE} 2>/dev/null - fi - /sbin/ip addr flush dev ${DEVICE} 2>/dev/null - /sbin/ip link set dev ${DEVICE} up - ethtool_set - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} - /usr/sbin/brctl addif -- ${BRIDGE} ${DEVICE} - # add the bits to setup driver parameters here - for arg in $BRIDGING_OPTS ; do - key=${arg%%=*}; - value=${arg##*=}; - echo $value > /sys/class/net/${DEVICE}/brport/$key - done - # Upon adding a device to a bridge, - # it's necessary to make radvd reload its config - [ -r /var/run/radvd/radvd.pid ] && kill -HUP $(cat /var/run/radvd/radvd.pid) - exit 0 + if [ ! -d /sys/class/net/${BRIDGE}/bridge ]; then + /usr/sbin/brctl addbr -- ${BRIDGE} 2>/dev/null + fi + /sbin/ip addr flush dev ${DEVICE} 2>/dev/null + /sbin/ip link set dev ${DEVICE} up + ethtool_set + [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} + /usr/sbin/brctl addif -- ${BRIDGE} ${DEVICE} + # add the bits to setup driver parameters here + for arg in $BRIDGING_OPTS ; do + key=${arg%%=*}; + value=${arg##*=}; + echo $value > /sys/class/net/${DEVICE}/brport/$key + done + # Upon adding a device to a bridge, + # it's necessary to make radvd reload its config + [ -r /var/run/radvd/radvd.pid ] && kill -HUP $(cat /var/run/radvd/radvd.pid) + exit 0 fi - + if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then - if [[ "${PERSISTENT_DHCLIENT}" = [yY1]* ]]; then - ONESHOT=""; + if is_true "${PERSISTENT_DHCLIENT}"; then + ONESHOT=""; else - ONESHOT="-1"; + ONESHOT="-1"; fi; generate_config_file_name generate_lease_file_name - DHCLIENTARGS="${DHCLIENTARGS} -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient-${DEVICE}.pid" + + if is_hostname_set; then + # We already have the hostname ->> send it to DHCP: + DHCLIENTARGS="${DHCLIENTARGS} -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient-${DEVICE}.pid" + else + # We need to acquire the hostname: + DHCLIENTARGS="${DHCLIENTARGS} ${DHCP_HOSTNAME:+-H $DHCP_HOSTNAME} ${ONESHOT} -q ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient-${DEVICE}.pid" + fi + echo echo -n $"Determining IP information for ${DEVICE}..." - if [[ "${PERSISTENT_DHCLIENT}" != [yY1]* ]] && check_link_down ${DEVICE}; then - echo $" failed; no link present. Check cable?" - exit 1 + if ! is_true "${PERSISTENT_DHCLIENT}" && check_link_down ${DEVICE}; then + echo $" failed; no link present. Check cable?" + exit 1 fi ethtool_set if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then - echo $" done." - dhcpipv4="good" + echo $" done." + dhcpipv4="good" else - echo $" failed." - if [[ "${IPV4_FAILURE_FATAL}" = [Yy1]* ]] ; then - exit 1 - fi - if [[ "$IPV6INIT" = [nN0]* || "$DHCPV6C" != [yY1]* ]] ; then - exit 1 - fi - net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning + echo $" failed." + if is_true "${IPV4_FAILURE_FATAL}"; then + exit 1 + fi + if is_false "$IPV6INIT" || ! is_true "$DHCPV6C"; then + exit 1 + fi + net_log "Unable to obtain IPv4 DHCP address ${DEVICE}." warning fi -# end dynamic device configuration + # end dynamic device configuration else if [ -z "${IPADDR}" -a -z "${IPADDR0}" -a -z "${IPADDR1}" -a -z "${IPADDR2}" ]; then - # enable device without IP, useful for e.g. PPPoE - ip link set dev ${REALDEVICE} up - ethtool_set - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} + # enable device without IP, useful for e.g. PPPoE + ip link set dev ${REALDEVICE} up + ethtool_set + [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} else - - expand_config - - [ -n "${ARP}" ] && \ - ip link set dev ${REALDEVICE} $(toggle_value arp $ARP) - - if ! ip link set dev ${REALDEVICE} up ; then - net_log $"Failed to bring up ${DEVICE}." - exit 1 - fi - ethtool_set + expand_config - [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} + [ -n "${ARP}" ] && \ + ip link set dev ${REALDEVICE} $(toggle_value arp $ARP) - if [ "${DEVICE}" = "lo" ]; then - SCOPE="scope host" - else - SCOPE=${SCOPE:-} - fi - - if [ -n "$SRCADDR" ]; then - SRC="src $SRCADDR" - else - SRC= - fi - - # set IP address(es) - for idx in {0..256} ; do - if [ -z "${ipaddr[$idx]}" ]; then - break + if ! ip link set dev ${REALDEVICE} up ; then + net_log $"Failed to bring up ${DEVICE}." + exit 1 fi - if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then - if [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] ; then - /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]} + ethtool_set + + [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY} + + if [ "${DEVICE}" = "lo" ]; then + SCOPE="scope host" + else + SCOPE=${SCOPE:-} + fi + + if [ -n "$SRCADDR" ]; then + SRC="src $SRCADDR" + else + SRC= + fi + + # set IP address(es) + for idx in {0..256} ; do + if [ -z "${ipaddr[$idx]}" ]; then + break + fi + + if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then + if [ "${REALDEVICE}" != "lo" ] && [ "${arpcheck[$idx]}" != "no" ] ; then + ARPING=$(/sbin/arping -c 2 -w ${ARPING_WAIT:-3} -D -I ${REALDEVICE} ${ipaddr[$idx]}) if [ $? = 1 ]; then - net_log $"Error, some other host already uses address ${ipaddr[$idx]}." + ARPINGMAC=$(echo $ARPING | sed -ne 's/.*\[\(.*\)\].*/\1/p') + net_log $"Error, some other host ($ARPINGMAC) already uses address ${ipaddr[$idx]}." exit 1 fi + fi + + if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \ + brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then + net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." + fi fi - if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \ - brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then - net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}." + if [ -n "$SRCADDR" ]; then + sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1 fi - fi - if [ -n "$SRCADDR" ]; then - sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1 - fi + # update ARP cache of neighboring computers + if [ "${REALDEVICE}" != "lo" ]; then + /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} + ( sleep 2; + /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null & + fi - # update ARP cache of neighboring computers - if [ "${REALDEVICE}" != "lo" ]; then - /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} - ( sleep 2; - /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null & + # set lifetime of address to forever + ip addr change ${ipaddr[$idx]}/${prefix[$idx]} dev ${REALDEVICE} valid_lft forever preferred_lft forever + done + + # Set a default route. + if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then + # set up default gateway. replace if one already exists + if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then + ip route replace default ${METRIC:+metric $METRIC} \ + ${EXTRA_ROUTE_OPTS} \ + via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \ + ${GATEWAYDEV:+dev $GATEWAYDEV} || + net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}." + elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then + ip route replace default ${METRIC:+metric $METRIC} \ + ${EXTRA_ROUTE_OPTS} \ + ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} || + net_log $"Error adding default gateway for ${REALDEVICE}." + fi fi - - # set lifetime of address to forever - ip addr change ${ipaddr[$idx]}/${prefix[$idx]} dev ${REALDEVICE} valid_lft forever preferred_lft forever - done - - # Set a default route. - if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then - # set up default gateway. replace if one already exists - if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then - ip route replace default ${METRIC:+metric $METRIC} \ - via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \ - ${GATEWAYDEV:+dev $GATEWAYDEV} || - net_log $"Error adding default gateway ${GATEWAY} for ${DEVICE}." - elif [ "${GATEWAYDEV}" = "${DEVICE}" ]; then - ip route replace default ${METRIC:+metric $METRIC} \ - ${SRC} ${WINDOW:+window $WINDOW} dev ${REALDEVICE} || - net_log $"Error adding default gateway for ${REALDEVICE}." - fi - fi fi fi @@ -318,12 +329,21 @@ fi # IPv6 initialisation? /etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG} -if [[ "${DHCPV6C}" = [Yy1]* ]] && [ -x /sbin/dhclient ]; then +if is_true "${DHCPV6C}" && [ -x /sbin/dhclient ]; then generate_config_file_name 6 generate_lease_file_name 6 echo echo -n $"Determining IPv6 information for ${DEVICE}..." - if /sbin/dhclient -6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient6-${DEVICE}.pid -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${DEVICE} ; then + + if is_hostname_set; then + # We already have the hostname ->> send it to DHCP: + DHCLIENTARGS="-6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient6-${DEVICE}.pid -H ${DHCP_HOSTNAME:-${HOSTNAME%%.*}} ${DEVICE}" + else + # We need to acquire the hostname: + DHCLIENTARGS="-6 -1 ${DHCPV6C_OPTIONS} ${DHCLIENTCONF} -lf ${LEASEFILE} -pf /var/run/dhclient6-${DEVICE}.pid ${DHCP_HOSTNAME:+-H $DHCP_HOSTNAME} ${DEVICE}" + fi + + if /sbin/dhclient "$DHCLIENTARGS"; then echo $" done." else echo $" failed." @@ -336,4 +356,3 @@ if [[ "${DHCPV6C}" = [Yy1]* ]] && [ -x /sbin/dhclient ]; then fi exec /etc/sysconfig/network-scripts/ifup-post ${CONFIG} ${2} - diff --git a/sysconfig/network-scripts/ifup-ippp b/sysconfig/network-scripts/ifup-ippp index 8405c8d9..082b422e 100755 --- a/sysconfig/network-scripts/ifup-ippp +++ b/sysconfig/network-scripts/ifup-ippp @@ -20,7 +20,7 @@ CONFIG=$1 source_config if [ "${2}" = "boot" -a "${ONBOOT}" = "no" ]; then - exit + exit fi if [ ! -f /var/lock/subsys/isdn ] && [ -x /etc/init.d/isdn ] ; then @@ -46,7 +46,7 @@ if ! isdnctrl list all >/dev/null 2>&1 ; then /usr/bin/logger -p daemon.info -t ifup-ippp "cannot list ISDN devices" exit 1 fi - + # check if device already is configured isdnctrl list $DEVICE >/dev/null 2>&1 && exit 0 @@ -116,15 +116,15 @@ function addprovider() return 1 fi if [ "$DIALIN" != "on" ]; then - # we should hide the user name, so i add user name to option file. - if [ "$AUTH" = "-pap +chap" ]; then - create_option_file "name \"$USER\"" - else - create_option_file "user \"$USER\"" - fi - options="$options file /etc/ppp/ioption-secret-$DEVICE" + # we should hide the user name, so i add user name to option file. + if [ "$AUTH" = "-pap +chap" ]; then + create_option_file "name \"$USER\"" + else + create_option_file "user \"$USER\"" + fi + options="$options file /etc/ppp/ioption-secret-$DEVICE" fi - + # authentication options: # +pap and/or +chap does not work correct by dialout - remove # them if it's configured as dialout @@ -160,7 +160,7 @@ function addprovider() # set dialmode log_isdnctrl dialmode $DEVICE $DIALMODE - + [ -n "$SECURE" ] && log_isdnctrl secure $DEVICE $SECURE [ -n "$HUPTIMEOUT" ] && log_isdnctrl huptimeout $DEVICE $HUPTIMEOUT [ -n "$CHARGEHUP" ] && log_isdnctrl chargehup $DEVICE $CHARGEHUP @@ -179,7 +179,7 @@ function addprovider() fi [ -n "$CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $CBDELAY [ -n "$CBHUP" ] && log_isdnctrl cbhup $DEVICE $CBHUP - + options="$options ipparam $DEVNAME" [ "$ENCAP" = "syncppp" ] && log_isdnctrl pppbind $DEVICE @@ -188,12 +188,12 @@ function addprovider() options="$options ipcp-accept-local" else if [ "$DIALIN" != "on" ]; then - options="$options noipdefault" + options="$options noipdefault" fi fi # Add device options="$options /dev/$DEVICE" - + # set channel bundling if [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ]; then [ -z "$SLAVE_MSN" ] && SLAVE_MSN="$MSN" @@ -208,10 +208,10 @@ function addprovider() [ -z "$SLAVE_CALLBACK" ] && SLAVE_CALLBACK="$CALLBACK" [ -z "$SLAVE_CBDELAY" ] && SLAVE_CBDELAY="$CBDELAY" if [ "$DIALIN" != "on" ] ; then - [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto" + [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto" else - # Master should not dial by default on incoming MPPP - [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE" + # Master should not dial by default on incoming MPPP + [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE" fi slave=$SLAVE_DEVICE @@ -259,7 +259,7 @@ function addprovider() if [ "$GATEWAY" = "0.0.0.0" ]; then if [ "$DIALIN" != "on" ]; then - options="$options ipcp-accept-remote" + options="$options ipcp-accept-remote" fi options="$IPADDR:$GATEWAY $options" else @@ -277,16 +277,16 @@ function addprovider() # BSD-Compression scheme if [ "$BSDCOMP" = "on" ] ; then - options="$options bsdcomp 9,9" + options="$options bsdcomp 9,9" else - options="$options -bsdcomp" + options="$options -bsdcomp" fi # Stac compression if [ "$LZS" = "on" ] ; then - # supports LZS check mode 3 and 4 - [ -n "$LZS_MODE" ] || LZS_MODE="4" - [ "$LZS_MODE" = "3" ] && options="$options lzs 1" - [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4" + # supports LZS check mode 3 and 4 + [ -n "$LZS_MODE" ] || LZS_MODE="4" + [ "$LZS_MODE" = "3" ] && options="$options lzs 1" + [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4" fi # Set max receive and max transmit units @@ -309,10 +309,10 @@ function addprovider() # set CCP protocoll [ "$CCP" = "off" ] && options="$options noccp" - + # set host name [ -n "$ISDN_HOSTNAME" ] && options="$options remotename $ISDN_HOSTNAME" - + # Set authentication for i in $AUTH ; do options="$options $i" @@ -368,13 +368,13 @@ function addprovider() fi # Setup IPv6 - if [[ "$IPV6INIT" != [nN0]* && ! -z "$IPV6ADDR" ]]; then - # Native IPv6 use of device configured, check of encapsulation required - if [ "$ENCAP" = "syncppp" ]; then - echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'" - elif [ "$ENCAP" = "rawip" ]; then - echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'" - fi + if ! is_false "$IPV6INIT" && ! [[ -z "$IPV6ADDR" ]]; then + # Native IPv6 use of device configured, check of encapsulation required + if [ "$ENCAP" = "syncppp" ]; then + echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'" + elif [ "$ENCAP" = "rawip" ]; then + echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'" + fi fi /etc/sysconfig/network-scripts/ifup-ipv6 $CONFIG } diff --git a/sysconfig/network-scripts/ifup-ipv6 b/sysconfig/network-scripts/ifup-ipv6 index e688422f..c4a9b1d0 100755 --- a/sysconfig/network-scripts/ifup-ipv6 +++ b/sysconfig/network-scripts/ifup-ipv6 @@ -66,7 +66,7 @@ REALDEVICE=${DEVICE%%:*} DEVICE=$REALDEVICE # Test whether IPv6 configuration is disabled for this interface -[[ "$IPV6INIT" = [nN0]* ]] && exit 0 +is_false "$IPV6INIT" && exit 0 [ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 . /etc/sysconfig/network-scripts/network-functions-ipv6 @@ -78,13 +78,13 @@ ipv6_test || exit 1 # Test device status ipv6_test_device_status $DEVICE if [ $? != 0 -a $? != 11 ]; then - # device doesn't exist or other problem occurs - exit 1 + # device doesn't exist or other problem occurs + exit 1 fi # Setup IPv6 address on specified interface if [ -n "$IPV6ADDR" ]; then - ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1 + ipv6_add_addr_on_device $DEVICE $IPV6ADDR || exit 1 fi # Get current global IPv6 forwarding @@ -92,213 +92,224 @@ ipv6_global_forwarding_current="$(/sbin/sysctl -e -n net.ipv6.conf.all.forwardin # Set some proc switches depending on defines if [ "$IPV6FORWARDING" = "yes" ]; then - # Global forwarding should be enabled - - # Check, if global IPv6 forwarding was already set by global script - if [ $ipv6_global_forwarding_current -ne 1 ]; then - net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel" - net_log $"Please restart network with '/sbin/service network restart'" - fi - - ipv6_local_forwarding=1 - ipv6_local_auto=0 - if [ "$IPV6_ROUTER" = "no" ]; then - ipv6_local_forwarding=0 - fi - if [ "$IPV6_AUTOCONF" = "yes" ]; then - ipv6_local_auto=1 - fi + # Global forwarding should be enabled + + # Check, if global IPv6 forwarding was already set by global script + if [ $ipv6_global_forwarding_current -ne 1 ]; then + net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel" + net_log $"Please restart network with '/sbin/service network restart'" + fi + + ipv6_local_forwarding=1 + ipv6_local_auto=0 + ipv6_local_accept_ra=0 + if [ "$IPV6_ROUTER" = "no" ]; then + ipv6_local_forwarding=0 + fi + if [ "$IPV6_AUTOCONF" = "yes" ]; then + ipv6_local_auto=1 + ipv6_local_accept_ra=2 + fi else - # Global forwarding should be disabled - - # Check, if global IPv6 forwarding was already set by global script - if [ $ipv6_global_forwarding_current -ne 0 ]; then - net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel" - net_log $"Please restart network with '/sbin/service network restart'" - fi - - ipv6_local_forwarding=0 - ipv6_local_auto=1 - if [ "$IPV6_AUTOCONF" = "no" ]; then - ipv6_local_auto=0 - fi + # Global forwarding should be disabled + + # Check, if global IPv6 forwarding was already set by global script + if [ $ipv6_global_forwarding_current -ne 0 ]; then + net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel" + net_log $"Please restart network with '/sbin/service network restart'" + fi + + ipv6_local_forwarding=0 + ipv6_local_auto=1 + ipv6_local_accept_ra=1 + if [ "$IPV6_AUTOCONF" = "no" ]; then + ipv6_local_auto=0 + if [ ! "$IPV6_FORCE_ACCEPT_RA" = "yes" ]; then + ipv6_local_accept_ra=0 + fi + fi +fi + +if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_accept_ra >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1 fi -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=$ipv6_local_forwarding >/dev/null 2>&1 -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=$ipv6_local_auto >/dev/null 2>&1 -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=$ipv6_local_auto >/dev/null 2>&1 -/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.autoconf=$ipv6_local_auto >/dev/null 2>&1 # Set IPv6 MTU, if given if [ -n "$IPV6_MTU" ]; then - ipv6_set_mtu $DEVICE $IPV6_MTU + ipv6_set_mtu $DEVICE $IPV6_MTU fi # Setup additional IPv6 addresses from list, if given if [ -n "$IPV6ADDR_SECONDARIES" ]; then - for ipv6addr in $IPV6ADDR_SECONDARIES; do - ipv6_add_addr_on_device $DEVICE $ipv6addr - done + for ipv6addr in $IPV6ADDR_SECONDARIES; do + ipv6_add_addr_on_device $DEVICE $ipv6addr + done fi # Enable IPv6 RFC3041 privacy extensions if desired if [ "$IPV6_PRIVACY" = "rfc3041" ]; then - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1 - if [ $? -ne 0 ]; then - net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel" - fi + if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1 + if [ $? -ne 0 ]; then + net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel" + fi + fi fi # Setup default IPv6 route, check are done by function if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" + ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" fi # Setup additional static IPv6 routes on specified interface, if given if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do - ipv6_add_route $args $DEVICE - done + LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device args; do + ipv6_add_route $args $DEVICE + done fi # Setup of 6to4, if configured if [ "$IPV6TO4INIT" = "yes" ]; then - valid6to4config="yes" - - # Test device status of 6to4 tunnel - ipv6_test_device_status tun6to4 - if [ $? = 0 ]; then - # device is already up - net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first" - exit 1 - fi - - # Get IPv4 address for global 6to4 prefix calculation - if [ -n "$IPV6TO4_IPV4ADDR" ]; then - # Take special configured from config file (precedence 1) - ipv4addr="$IPV6TO4_IPV4ADDR" - - # Get local IPv4 address from interface - ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addrlocal" ]; then - # Take configured from config file - ipv4addrlocal="$IPADDR" - fi - else - # Get IPv4 address from interface first (has precedence 2) - ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" - if [ -z "$ipv4addr" ]; then - # Take configured from config file (precedence 3) - ipv4addr="$IPADDR" - fi - ipv4addrlocal="$ipv4addr" + valid6to4config="yes" + + # Test device status of 6to4 tunnel + ipv6_test_device_status tun6to4 + if [ $? = 0 ]; then + # device is already up + net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first" + exit 1 + fi + + # Get IPv4 address for global 6to4 prefix calculation + if [ -n "$IPV6TO4_IPV4ADDR" ]; then + # Take special configured from config file (precedence 1) + ipv4addr="$IPV6TO4_IPV4ADDR" + + # Get local IPv4 address from interface + ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)" + if [ -z "$ipv4addrlocal" ]; then + # Take configured from config file + ipv4addrlocal="$IPADDR" + fi + else + # Get IPv4 address from interface first (has precedence 2) + ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)" + if [ -z "$ipv4addr" ]; then + # Take configured from config file (precedence 3) + ipv4addr="$IPADDR" + fi + ipv4addrlocal="$ipv4addr" + fi + + if [ -n "$ipv4addr" ]; then + if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then + net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info + valid6to4config="no" + fi + if [ -z "$IPV6TO4_RELAY" ]; then + IPV6TO4_RELAY="192.88.99.1" + fi + + # Check/generate relay address + ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)" + if [ $? -ne 0 ]; then + valid6to4config="no" + fi + else + net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info + valid6to4config="no" + fi + + # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid + if [ "$valid6to4config" = "yes" ]; then + # Get MTU of master device + ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\/ { print $5 }')" + if [ -n "$ipv4mtu" ]; then + # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header + tunnelmtu=$(($ipv4mtu-20)) + fi + + if [ -n "$IPV6TO4_MTU" ]; then + if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then + net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning + else + tunnelmtu=$IPV6TO4_MTU + fi + fi + + ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1 + + # Add route to for compatible addresses (removed later again) + ipv6_add_route "::/96" "::" tun6to4 + + # Add default route, if device matches + if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then + if [ -n "$IPV6_DEFAULTGW" ]; then + net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning + fi + ipv6_set_default_route $ipv6to4_relay tun6to4 + fi + + # Add static routes + if [ -f /etc/sysconfig/static-routes-ipv6 ]; then + LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do + if [ -z "$network" ]; then + continue + fi + if [ -z "$gateway" ]; then + gateway="$ipv6to4_relay" + fi + ipv6_add_route $network $gateway tun6to4 + done + fi + + # Setup additional static IPv6 routes (newer config style) + if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then + sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do + if echo "$line" | LC_ALL=C grep -vq 'via'; then + # Add gateway if missing + line="$line via $ipv6to4_relay" + fi + /sbin/ip -6 route add $line + done fi - if [ -n "$ipv4addr" ]; then - if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then - net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info - valid6to4config="no" - fi - if [ -z "$IPV6TO4_RELAY" ]; then - IPV6TO4_RELAY="192.88.99.1" - fi - - # Check/generate relay address - ipv6to4_relay="$(ipv6_create_6to4_relay_address $IPV6TO4_RELAY)" - if [ $? -ne 0 ]; then - valid6to4config="no" - fi - else - net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info - valid6to4config="no" - fi - - # Setup 6to4 tunnel (hardwired name is "tun6to4"), if config is valid - if [ "$valid6to4config" = "yes" ]; then - # Get MTU of master device - ipv4mtu="$(/sbin/ip link show dev $DEVICE | awk '/\/ { print $5 }')" - if [ -n "$ipv4mtu" ]; then - # IPv6 tunnel MTU is IPv4 MTU minus 20 for IPv4 header - tunnelmtu=$(($ipv4mtu-20)) - fi - - if [ -n "$IPV6TO4_MTU" ]; then - if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then - net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning - else - tunnelmtu=$IPV6TO4_MTU - fi - fi - - ipv6_add_6to4_tunnel tun6to4 $ipv4addr "" $tunnelmtu $ipv4addrlocal || exit 1 - - # Add route to for compatible addresses (removed later again) - ipv6_add_route "::/96" "::" tun6to4 - - # Add default route, if device matches - if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then - if [ -n "$IPV6_DEFAULTGW" ]; then - net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning - fi - ipv6_set_default_route $ipv6to4_relay tun6to4 - fi - - # Add static routes - if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^tun6to4" /etc/sysconfig/static-routes-ipv6 | while read device network gateway; do - if [ -z "$network" ]; then - continue - fi - if [ -z "$gateway" ]; then - gateway="$ipv6to4_relay" - fi - ipv6_add_route $network $gateway tun6to4 - done - fi - - # Setup additional static IPv6 routes (newer config style) - if [ -f "/etc/sysconfig/network-scripts/route6-tun6to4" ]; then - sed -ne 's/#.*//' -e '/[^[:space:]]/p' /etc/sysconfig/network-scripts/route6-tun6to4 | while read line; do - if echo "$line" | LC_ALL=C grep -vq 'via'; then - # Add gateway if missing - line="$line via $ipv6to4_relay" - fi - /sbin/ip -6 route add $line - done - fi - - # Cleanup autmatically generated autotunnel (not needed for 6to4) - /sbin/ip -6 route del ::/96 dev tun6to4 - /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4 - - if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then - # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning - if [ $ipv6_global_forwarding_current -ne 1 ]; then - net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning - fi - - if [ -n "$IPV6TO4_ROUTING" ]; then - ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)" - if [ -n "$ipv6to4prefix" ]; then - # Add route to local networks - for devsuf in $IPV6TO4_ROUTING; do - dev="${devsuf%%-*}" - suf="$(echo $devsuf | awk -F- '{ print $2 }')" - ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf} - done - else - net_log $"Error occurred while calculating the IPv6to4 prefix" - fi - else - net_log $"radvd control enabled, but config is not complete" - fi - - # Control running radvd - ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE - fi - else - net_log $"6to4 configuration is not valid" - exit 1 + # Cleanup autmatically generated autotunnel (not needed for 6to4) + /sbin/ip -6 route del ::/96 dev tun6to4 + /sbin/ip -6 addr del "::$ipv4addrlocal/128" dev tun6to4 + + if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then + # RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning + if [ $ipv6_global_forwarding_current -ne 1 ]; then + net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning + fi + + if [ -n "$IPV6TO4_ROUTING" ]; then + ipv6to4prefix="$(ipv6_create_6to4_prefix $ipv4addr)" + if [ -n "$ipv6to4prefix" ]; then + # Add route to local networks + for devsuf in $IPV6TO4_ROUTING; do + dev="${devsuf%%-*}" + suf="$(echo $devsuf | awk -F- '{ print $2 }')" + ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf} + done + else + net_log $"Error occurred while calculating the IPv6to4 prefix" + fi + else + net_log $"radvd control enabled, but config is not complete" + fi + + # Control running radvd + ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE fi + else + net_log $"6to4 configuration is not valid" + exit 1 + fi fi #wait for all global IPv6 addresses to leave the "tentative" state diff --git a/sysconfig/network-scripts/ifup-plusb b/sysconfig/network-scripts/ifup-plusb index ce5a0321..1b29afeb 100755 --- a/sysconfig/network-scripts/ifup-plusb +++ b/sysconfig/network-scripts/ifup-plusb @@ -19,7 +19,7 @@ source_config if [ "foo$2" = "fooboot" -a "${ONBOOT}" = "no" ] then - exit + exit fi [ -z "$PREFIX" ] && eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK}) @@ -34,10 +34,10 @@ ip link set up dev ${DEVICE} . /etc/sysconfig/network if [ "${GATEWAY}" != "" ]; then - if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then - # set up default gateway - ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} - fi + if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then + # set up default gateway + ip route replace default ${METRIC:+metric $METRIC} via ${GATEWAY} + fi fi /etc/sysconfig/network-scripts/ifup-post $1 diff --git a/sysconfig/network-scripts/ifup-post b/sysconfig/network-scripts/ifup-post index 46f49e3a..ab0710b3 100755 --- a/sysconfig/network-scripts/ifup-post +++ b/sysconfig/network-scripts/ifup-post @@ -1,4 +1,7 @@ -#!/bin/sh +#!/bin/bash + +# Source the general functions for is_true() and is_false(): +. /etc/init.d/functions cd /etc/sysconfig/network-scripts . ./network-functions @@ -16,87 +19,89 @@ source_config [ -z "$REALDEVICE" ] && REALDEVICE=$DEVICE -if [ "$ISALIAS" = no ] ; then +if is_false "$ISALIAS"; then /etc/sysconfig/network-scripts/ifup-aliases ${DEVICE} ${CONFIG} fi -/etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME} - - -if [ "$PEERDNS" != "no" ] ||[ -n "$RESOLV_MODS" -a "$RESOLV_MODS" != "no" ]; then - [ -n "$MS_DNS1" ] && DNS1=$MS_DNS1 - [ -n "$MS_DNS2" ] && DNS2=$MS_DNS2 - - if [ -z "$DNS1" -a -n "$DNS2" ]; then - DNS1=$DNS2 - DNS2= - fi - - if ( [ -n "$DNS1" ] && ! grep -q "^nameserver $DNS1" /etc/resolv.conf ) || - ( [ -n "$DNS2" ] && ! grep -q "^nameserver $DNS2" /etc/resolv.conf ) && - tr=$(mktemp /tmp/XXXXXX) ; then - current_replacement="$DNS1" - next_replacement="$DNS2" - search= - (cat /etc/resolv.conf ; echo EOF ; echo EOF) | while read answer ; do - case $answer in - nameserver*|EOF) - if [ -n "$current_replacement" ] ; then - echo "nameserver $current_replacement" >> $tr - if [ -n "$next_replacement" ] ; then - current_replacement="$next_replacement" - next_replacement= - else - current_replacement= - fi - else - if [ "$answer" != EOF ] ; then - echo "$answer" >> $tr - fi - fi - ;; - domain*|search*) - if [ -n "$DOMAIN" ]; then - echo "$answer" | while read key value ; do - search="$search $value" - done - else - echo "$answer" >> $tr - fi - ;; - *) - echo "$answer" >> $tr - ;; - esac - done - if [ -n "$DOMAIN" ]; then - echo "search $DOMAIN $search" >> $tr +if ! is_true "$NOROUTESET"; then + /etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME} +fi + + +if ! is_false "$PEERDNS" || [ -n "$RESOLV_MODS" ] && ! is_false "$RESOLV_MODS"; then + [ -n "$MS_DNS1" ] && DNS1=$MS_DNS1 + [ -n "$MS_DNS2" ] && DNS2=$MS_DNS2 + + if [ -z "$DNS1" -a -n "$DNS2" ]; then + DNS1=$DNS2 + DNS2= fi - # backup resolv.conf - cp -af /etc/resolv.conf /etc/resolv.conf.save - - # maintain permissions - # but set umask in case it doesn't exist! - oldumask=$(umask) - umask 022 - change_resolv_conf $tr - rm -f $tr - umask $oldumask - fi + if ( [ -n "$DNS1" ] && ! grep -q "^nameserver $DNS1" /etc/resolv.conf ) || + ( [ -n "$DNS2" ] && ! grep -q "^nameserver $DNS2" /etc/resolv.conf ) && + tr=$(mktemp /tmp/XXXXXX) ; then + current_replacement="$DNS1" + next_replacement="$DNS2" + search= + (cat /etc/resolv.conf ; echo EOF ; echo EOF) | while read answer ; do + case $answer in + nameserver*|EOF) + if [ -n "$current_replacement" ] ; then + echo "nameserver $current_replacement" >> $tr + if [ -n "$next_replacement" ] ; then + current_replacement="$next_replacement" + next_replacement= + else + current_replacement= + fi + else + if [ "$answer" != EOF ] ; then + echo "$answer" >> $tr + fi + fi + ;; + domain*|search*) + if [ -n "$DOMAIN" ]; then + echo "$answer" | while read key value ; do + search="$search $value" + done + else + echo "$answer" >> $tr + fi + ;; + *) + echo "$answer" >> $tr + ;; + esac + done + if [ -n "$DOMAIN" ]; then + echo "search $DOMAIN $search" >> $tr + fi + + # backup resolv.conf + cp -af /etc/resolv.conf /etc/resolv.conf.save + + # maintain permissions + # but set umask in case it doesn't exist! + oldumask=$(umask) + umask 022 + change_resolv_conf $tr + rm -f $tr + umask $oldumask + fi fi # don't set hostname on ppp/slip connections if [ "$2" = "boot" -a \ - "${DEVICE}" != lo -a \ - "${DEVICETYPE}" != "ppp" -a \ - "${DEVICETYPE}" != "slip" ]; then + "${DEVICE}" != lo -a \ + "${DEVICETYPE}" != "ppp" -a \ + "${DEVICETYPE}" != "slip" ]; then if need_hostname; then - IPADDR=$(LANG=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }') - eval $(/bin/ipcalc --silent --hostname ${IPADDR} ; echo "status=$?") - if [ "$status" = "0" ]; then - set_hostname $HOSTNAME - fi + IPADDR=$(LANG=C ip -o -4 addr ls dev ${DEVICE} | awk '{ print $4 ; exit }') + eval $(/bin/ipcalc --silent --hostname ${IPADDR} ; echo "status=$?") + if [ "$status" = "0" ]; then + set_hostname $HOSTNAME + fi fi fi diff --git a/sysconfig/network-scripts/ifup-routes b/sysconfig/network-scripts/ifup-routes index ff8d5b56..517c2bbb 100755 --- a/sysconfig/network-scripts/ifup-routes +++ b/sysconfig/network-scripts/ifup-routes @@ -1,6 +1,7 @@ #! /bin/bash # # adds static routes which go through device $1 + if [ -z "$1" ]; then echo $"usage: ifup-routes []" exit 1 @@ -12,14 +13,14 @@ handle_file () { . $1 routenum=0 while [ "x$(eval echo '$'ADDRESS$routenum)x" != "xx" ]; do - eval $(ipcalc -p $(eval echo '$'ADDRESS$routenum) $(eval echo '$'NETMASK$routenum)) - line="$(eval echo '$'ADDRESS$routenum)/$PREFIX" - if [ "x$(eval echo '$'GATEWAY$routenum)x" != "xx" ]; then - line="$line via $(eval echo '$'GATEWAY$routenum)" - fi - line="$line dev $2" - /sbin/ip route add $line - routenum=$(($routenum+1)) + eval $(ipcalc -p $(eval echo '$'ADDRESS$routenum) $(eval echo '$'NETMASK$routenum)) + line="$(eval echo '$'ADDRESS$routenum)/$PREFIX" + if [ "x$(eval echo '$'GATEWAY$routenum)x" != "xx" ]; then + line="$line via $(eval echo '$'GATEWAY$routenum)" + fi + line="$line dev $2" + /sbin/ip route add $line + routenum=$(($routenum+1)) done } @@ -44,15 +45,15 @@ if [ -n "$2" -a "$2" != "$1" ]; then fi for file in $FILES; do - if [ -f "$file" ]; then - if grep -Eq '^[[:space:]]*ADDRESS[0-9]+=' $file ; then - # new format - handle_file $file ${1%:*} - else - # older format - handle_ip_file $file - fi - fi + if [ -f "$file" ]; then + if grep -Eq '^[[:space:]]*ADDRESS[0-9]+=' $file ; then + # new format + handle_file $file ${1%:*} + else + # older format + handle_ip_file $file + fi + fi done @@ -69,7 +70,7 @@ if [ -n "$2" -a "$2" != "$1" ]; then fi for file in $FILES; do - if [ -f "$file" ]; then - handle_ip_file $file - fi + if [ -f "$file" ]; then + handle_ip_file $file + fi done diff --git a/sysconfig/network-scripts/ifup-sit b/sysconfig/network-scripts/ifup-sit index 01c8756c..3daa3801 100755 --- a/sysconfig/network-scripts/ifup-sit +++ b/sysconfig/network-scripts/ifup-sit @@ -44,7 +44,7 @@ REALDEVICE=${DEVICE%%:*} [ "$DEVICE" != "$REALDEVICE" ] && exit 0 # Test whether IPv6 configuration is disabled for this interface -[[ "$IPV6INIT" = [nN0]* ]] && exit 0 +is_false "$IPV6INIT" && exit 0 [ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1 . /etc/sysconfig/network-scripts/network-functions-ipv6 @@ -55,21 +55,21 @@ ipv6_test || exit 1 # Generic tunnel device sit0 is not supported here if [ "$DEVICE" = "sit0" ]; then - net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" - exit 1 + net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking" + exit 1 fi if [ -z "$IPV6TUNNELIPV4" ]; then - net_log $"Missing remote IPv4 address of tunnel, configuration is not valid" - exit 1 + net_log $"Missing remote IPv4 address of tunnel, configuration is not valid" + exit 1 fi # Test device status ipv6_test_device_status $DEVICE if [ $? = 0 ]; then - # device is already up - net_log $"Device '$DEVICE' is already up, please shutdown first" - exit 1 + # device is already up + net_log $"Device '$DEVICE' is already up, please shutdown first" + exit 1 fi # Create tunnel @@ -77,31 +77,31 @@ ipv6_add_tunnel_device $DEVICE $IPV6TUNNELIPV4 "" $IPV6TUNNELIPV4LOCAL || exit 1 # Set IPv6 MTU, if given if [ -n "$IPV6_MTU" ]; then - ipv6_set_mtu $DEVICE $IPV6_MTU + ipv6_set_mtu $DEVICE $IPV6_MTU fi # Apply local IPv6 address, if given (numbered tunnel) if [ -n "$IPV6ADDR" ]; then - ipv6_add_addr_on_device $DEVICE $IPV6ADDR + ipv6_add_addr_on_device $DEVICE $IPV6ADDR fi # Setup additional IPv6 addresses from list, if given if [ -n "$IPV6ADDR_SECONDARIES" ]; then - for ipv6addr in $IPV6ADDR_SECONDARIES; do - ipv6_add_addr_on_device $DEVICE $ipv6addr - done + for ipv6addr in $IPV6ADDR_SECONDARIES; do + ipv6_add_addr_on_device $DEVICE $ipv6addr + done fi # Setup default IPv6 route, check are done by function if [ -n "$IPV6_DEFAULTDEV" -o -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" + ipv6_set_default_route "$IPV6_DEFAULTGW" "$IPV6_DEFAULTDEV" "$DEVICE" fi # Setup additional static IPv6 routes on specified interface, if given if [ -f /etc/sysconfig/static-routes-ipv6 ]; then - LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device ipv6route args; do - ipv6_add_route $ipv6route :: $DEVICE - done + LC_ALL=C grep -w "^$DEVICE" /etc/sysconfig/static-routes-ipv6 | while read device ipv6route args; do + ipv6_add_route $ipv6route :: $DEVICE +done fi # Setup static routes diff --git a/sysconfig/network-scripts/ifup-wireless b/sysconfig/network-scripts/ifup-wireless index 70e84a21..702b6199 100755 --- a/sysconfig/network-scripts/ifup-wireless +++ b/sysconfig/network-scripts/ifup-wireless @@ -26,31 +26,37 @@ # Only meant to be called from ifup. -IW=iw +cd /etc/sysconfig/network-scripts +. ./network-functions + +IW=${IW:-iw} -[ "$DEVICE" -a "$MODE" ] || exit [ "$KEY" ] && KEYS="key d:0:$KEY" shopt -s nocasematch case "$MODE" in managed) - [ "$ESSID" ] || exit - $IW dev "$DEVICE" set type managed - $IW dev "$DEVICE" connect -w "$ESSID" $FREQ $KEYS + if [ "$ESSID" ]; then + $IW dev "$DEVICE" set type managed + $IW dev "$DEVICE" connect -w "$ESSID" $FREQ $KEYS + fi ;; ad-hoc) - [ "$ESSID" && "$FREQ" ] || exit - $IW dev "$DEVICE" set type ibss - $IW dev "$DEVICE" ibss join "$ESSID" "$FREQ" $KEYS + if [ -n "$ESSID" -a -n "$FREQ" ]; then + $IW dev "$DEVICE" set type ibss + $IW dev "$DEVICE" ibss join "$ESSID" "$FREQ" $KEYS + fi ;; monitor) - [ "$FREQ" ] || exit - $IW dev "$DEVICE" set type monitor - $IW dev "$DEVICE" set freq "$FREQ" + if [ "$FREQ" ]; then + $IW dev "$DEVICE" set type monitor + $IW dev "$DEVICE" set freq "$FREQ" + fi + ;; esac if [ -n "$WOWLAN" ] ; then - PHYDEVICE=phy_wireless_device $DEVICE + PHYDEVICE=$(phy_wireless_device $DEVICE) iw phy $PHYDEVICE wowlan enable ${WOWLAN} fi diff --git a/sysconfig/network-scripts/init.ipv6-global b/sysconfig/network-scripts/init.ipv6-global index da1c1742..8ec1d992 100755 --- a/sysconfig/network-scripts/init.ipv6-global +++ b/sysconfig/network-scripts/init.ipv6-global @@ -28,8 +28,6 @@ # IPV6_DEFAULTDEV= [optional] # - - . /etc/sysconfig/network cd /etc/sysconfig/network-scripts @@ -44,122 +42,123 @@ POSITION="$2" # Initialize IPv6, depending on caller option case $ACTION in - start) - case $POSITION in - pre) - # IPv6 test, module loaded, exit if system is not IPv6-ready - ipv6_test || exit 1 - - - if [ "$IPV6FORWARDING" = "yes" ]; then - ipv6_global_forwarding=1 - ipv6_global_auto=0 - else - ipv6_global_forwarding=0 - if [ "$IPV6_AUTOCONF" = "no" ]; then - ipv6_global_auto=0 - else - ipv6_global_auto=1 - fi - fi - - # Reset IPv6 sysctl switches for "all", "default" and still existing devices - for i in /proc/sys/net/ipv6/conf/* ; do - interface=${i##*/} - sinterface=${interface/.//} - # Host/Router behaviour for the interface - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=$ipv6_global_forwarding >/dev/null 2>&1 - - # Autoconfiguration and redirect handling for Hosts - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=$ipv6_global_auto >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=$ipv6_global_auto >/dev/null 2>&1 - done - ;; - - post) - # IPv6 test, module loaded, exit if system is not IPv6-ready - ipv6_test || exit 1 - - - if [ "$IPV6_AUTOTUNNEL" = "yes" ]; then - ipv6_enable_autotunnel - # autotunnel interface doesn't require a MTU setup - fi - - ## Add some routes which should never appear on the wire - # Unreachable IPv4-only addresses, normally blocked by source address selection - /sbin/ip route add unreach ::ffff:0.0.0.0/96 - # Unreachable IPv4-mapped addresses - /sbin/ip route add unreach ::0.0.0.0/96 - # Unreachable 6to4: IPv4 multicast, reserved, limited broadcast - /sbin/ip route add unreach 2002:e000::/19 - # Unreachable 6to4: IPv4 loopback - /sbin/ip route add unreach 2002:7f00::/24 - # Unreachable 6to4: IPv4 private (RFC 1918) - /sbin/ip route add unreach 2002:0a00::/24 - /sbin/ip route add unreach 2002:ac10::/28 - /sbin/ip route add unreach 2002:c0a8::/32 - # Unreachable 6to4: IPv4 private (APIPA / DHCP link-local) - /sbin/ip route add unreach 2002:a9fe::/32 - # Unreachable IPv6: 6bone test addresses - /sbin/ip route add unreach 3ffe:ffff::/32 - - # Set default route for autotunnel, if specified - if [ "$IPV6_DEFAULTDEV" = "sit0" -a "$IPV6_AUTOTUNNEL" = "yes" ]; then - if [ -n "$IPV6_DEFAULTGW" ]; then - ipv6_set_default_route $IPV6_DEFAULTGW $IPV6_DEFAULTDEV sit0 - elif [ -n "$IPV6_DEFAULTDEV" ]; then - ipv6_set_default_route "" $IPV6_DEFAULTDEV sit0 - fi - fi - ;; - - *) - echo "Usage: $0 $1 {pre|post}" - ;; - - esac - ;; - - stop) - case $POSITION in - pre) - ;; - - post) - # IPv6 test, no module loaded, exit if system is not IPv6-ready - ipv6_test testonly || exit 0 - - - for i in /proc/sys/net/ipv6/conf/* ; do - interface=${i##*/} - sinterface=${interface/.//} - # Assume Host behaviour - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=0 >/dev/null 2>&1 - - # Disable autoconfiguration and redirects - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=0 >/dev/null 2>&1 - done - - # Cleanup still existing tunnel devices - ipv6_cleanup_tunnel_devices - - # Shut down generic tunnel interface now - if ipv6_test_device_status sit0 ; then - /sbin/ip link set sit0 down - fi - ;; - - *) - echo "Usage: $0 $1 {pre|post}" - ;; - - esac - ;; +start) + case $POSITION in + pre) + # IPv6 test, module loaded, exit if system is not IPv6-ready + ipv6_test || exit 1 + + if [ "$IPV6FORWARDING" = "yes" ]; then + ipv6_global_forwarding=1 + ipv6_global_auto=0 + else + ipv6_global_forwarding=0 + if [ "$IPV6_AUTOCONF" = "no" ]; then + ipv6_global_auto=0 + else + ipv6_global_auto=1 + fi + fi + + if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then + # Reset IPv6 sysctl switches for "all", "default" and still existing devices + for i in /proc/sys/net/ipv6/conf/* ; do + interface=${i##*/} + sinterface=${interface/.//} + # Host/Router behaviour for the interface + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=$ipv6_global_forwarding >/dev/null 2>&1 + + # Autoconfiguration and redirect handling for Hosts + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=$ipv6_global_auto >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=$ipv6_global_auto >/dev/null 2>&1 + done + fi + ;; + + post) + # IPv6 test, module loaded, exit if system is not IPv6-ready + ipv6_test || exit 1 + + if [ "$IPV6_AUTOTUNNEL" = "yes" ]; then + ipv6_enable_autotunnel + # autotunnel interface doesn't require a MTU setup + fi + + ## Add some routes which should never appear on the wire + # Unreachable IPv4-only addresses, normally blocked by source address selection + /sbin/ip route add unreach ::ffff:0.0.0.0/96 + # Unreachable IPv4-mapped addresses + /sbin/ip route add unreach ::0.0.0.0/96 + # Unreachable 6to4: IPv4 multicast, reserved, limited broadcast + /sbin/ip route add unreach 2002:e000::/19 + # Unreachable 6to4: IPv4 loopback + /sbin/ip route add unreach 2002:7f00::/24 + # Unreachable 6to4: IPv4 private (RFC 1918) + /sbin/ip route add unreach 2002:0a00::/24 + /sbin/ip route add unreach 2002:ac10::/28 + /sbin/ip route add unreach 2002:c0a8::/32 + # Unreachable 6to4: IPv4 private (APIPA / DHCP link-local) + /sbin/ip route add unreach 2002:a9fe::/32 + # Unreachable IPv6: 6bone test addresses + /sbin/ip route add unreach 3ffe:ffff::/32 + + # Set default route for autotunnel, if specified + if [ "$IPV6_DEFAULTDEV" = "sit0" -a "$IPV6_AUTOTUNNEL" = "yes" ]; then + if [ -n "$IPV6_DEFAULTGW" ]; then + ipv6_set_default_route $IPV6_DEFAULTGW $IPV6_DEFAULTDEV sit0 + elif [ -n "$IPV6_DEFAULTDEV" ]; then + ipv6_set_default_route "" $IPV6_DEFAULTDEV sit0 + fi + fi + ;; + + *) + echo "Usage: $0 $1 {pre|post}" + ;; + + esac + ;; + +stop) + case $POSITION in + pre) + ;; + + post) + # IPv6 test, no module loaded, exit if system is not IPv6-ready + ipv6_test testonly || exit 0 + + if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then + for i in /proc/sys/net/ipv6/conf/* ; do + interface=${i##*/} + sinterface=${interface/.//} + # Assume Host behaviour + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.forwarding=0 >/dev/null 2>&1 + + # Disable autoconfiguration and redirects + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_ra=0 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$sinterface.accept_redirects=0 >/dev/null 2>&1 + done + fi + + # Cleanup still existing tunnel devices + ipv6_cleanup_tunnel_devices + + # Shut down generic tunnel interface now + if ipv6_test_device_status sit0 ; then + /sbin/ip link set sit0 down + fi + ;; *) - echo $"Usage: $0 {start|stop|reload|restart|showsysctl}" - exit 1 - ;; + echo "Usage: $0 $1 {pre|post}" + ;; + + esac + ;; + +*) + echo $"Usage: $0 {start|stop|reload|restart|showsysctl}" + exit 1 + ;; esac diff --git a/sysconfig/network-scripts/network-functions b/sysconfig/network-scripts/network-functions index 8a79802c..d3b24eee 100644 --- a/sysconfig/network-scripts/network-functions +++ b/sysconfig/network-scripts/network-functions @@ -12,41 +12,40 @@ export PATH get_hwaddr () { if [ -f /sys/class/net/${1}/address ]; then - awk '{ print toupper($0) }' < /sys/class/net/${1}/address + awk '{ print toupper($0) }' < /sys/class/net/${1}/address elif [ -d "/sys/class/net/${1}" ]; then - LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \ - awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, - "\\1", 1)); }' + LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \ + awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/, + "\\1", 1)); }' fi } get_config_by_device () { - LANG=C grep -l "^[[:space:]]*DEVICE=\"\?${1}\"\?\([[:space:]#]\|$\)" \ - /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" + LANG=C grep -l "^[[:space:]]*DEVICE=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" \ + /etc/sysconfig/network-scripts/ifcfg-* \ + | LC_ALL=C sed -e "$__sed_discard_ignored_files" } get_config_by_hwaddr () { - LANG=C grep -il "^[[:space:]]*HWADDR=\"\?${1}\"\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" + LANG=C grep -il "^[[:space:]]*HWADDR=['\"]\?${1}['\"]\?\([[:space:]#]\|$\)" /etc/sysconfig/network-scripts/ifcfg-* \ + | LC_ALL=C sed -e "$__sed_discard_ignored_files" } get_config_by_subchannel () { LANG=C grep -E -i -l \ - "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \ - /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" + "^[[:space:]]*SUBCHANNELS=['\"]?([0-9]\.[0-9]\.[a-f0-9]+,){0,2}${1}(,[0-9]\.[0-9]\.[a-f0-9]+){0,2}['\"]?([[:space:]]+#|[[:space:]]*$)" \ + /etc/sysconfig/network-scripts/ifcfg-* \ + | LC_ALL=C sed -e "$__sed_discard_ignored_files" } get_config_by_name () { - LANG=C grep -E -i -l \ - "^[[:space:]]*NAME=\"(Auto |System )?${1}\"" \ + LANG=C grep -E -i -l "^[[:space:]]*NAME=\"(Auto |System )?${1}\"" \ /etc/sysconfig/network-scripts/ifcfg-* \ - | LC_ALL=C sed -e "$__sed_discard_ignored_files" + | LC_ALL=C sed -e "$__sed_discard_ignored_files" } get_device_by_hwaddr () @@ -59,24 +58,26 @@ get_uuid_by_config () dbus-send --system --print-reply --dest=com.redhat.ifcfgrh1 /com/redhat/ifcfgrh1 com.redhat.ifcfgrh1.GetIfcfgDetails string:"/etc/sysconfig/network-scripts/$1" 2>/dev/null | awk -F '"' '/string / { print $2 }' } -generate_lease_file_name () { - local ver=$1 - LEASEFILE="/var/lib/dhclient/dhclient$ver-${DEVICE}.leases" - if [ -f $LEASEFILE ]; then - return - fi - LEASEFILE="/var/lib/dhclient/dhclient$ver-${UUID}-${DEVICE}.lease" +generate_lease_file_name () +{ + local ver=$1 + LEASEFILE="/var/lib/dhclient/dhclient$ver-${DEVICE}.leases" + if [ -f $LEASEFILE ]; then + return + fi + LEASEFILE="/var/lib/dhclient/dhclient$ver-${UUID}-${DEVICE}.lease" } -generate_config_file_name () { - local ver=$1 - if [ -s /etc/dhcp/dhclient$ver-${DEVICE}.conf ]; then - DHCLIENTCONF="-cf /etc/dhcp/dhclient$ver-${DEVICE}.conf"; - elif [ -s /etc/dhclient$ver-${DEVICE}.conf ]; then - DHCLIENTCONF="-cf /etc/dhclient$ver-${DEVICE}.conf"; - else - DHCLIENTCONF=''; - fi +generate_config_file_name () +{ + local ver=$1 + if [ -s /etc/dhcp/dhclient$ver-${DEVICE}.conf ]; then + DHCLIENTCONF="-cf /etc/dhcp/dhclient$ver-${DEVICE}.conf"; + elif [ -s /etc/dhclient$ver-${DEVICE}.conf ]; then + DHCLIENTCONF="-cf /etc/dhclient$ver-${DEVICE}.conf"; + else + DHCLIENTCONF=''; + fi } need_config () @@ -89,21 +90,21 @@ need_config () [ -f "${CONFIG}" ] && return nconfig=$(get_config_by_name "${1}") if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then - CONFIG=${nconfig##*/} - return + CONFIG=${nconfig##*/} + return fi local addr=$(get_hwaddr ${1}) if [ -n "$addr" ]; then - nconfig=$(get_config_by_hwaddr ${addr}) - if [ -n "$nconfig" ] ; then - CONFIG=${nconfig##*/} - [ -f "${CONFIG}" ] && return - fi + nconfig=$(get_config_by_hwaddr ${addr}) + if [ -n "$nconfig" ] ; then + CONFIG=${nconfig##*/} + [ -f "${CONFIG}" ] && return + fi fi nconfig=$(get_config_by_device ${1}) if [ -n "$nconfig" ] && [ -f "$nconfig" ]; then - CONFIG=${nconfig##*/} - return + CONFIG=${nconfig##*/} + return fi } @@ -114,45 +115,45 @@ source_config () . /etc/sysconfig/network-scripts/$CONFIG [ -r "keys-$DEVNAME" ] && . /etc/sysconfig/network-scripts/keys-$DEVNAME case "$TYPE" in - Ethernet) - DEVICETYPE="eth" - ;; - CIPE) - DEVICETYPE="cipcb" - ;; - IPSEC) - DEVICETYPE="ipsec" - ;; - Modem) - DEVICETYPE="ppp" - ;; - xDSL) - DEVICETYPE="ppp" - ;; - ISDN) - DEVICETYPE="ippp" - ;; - Wireless) - DEVICETYPE="eth" - ;; - "Token Ring") - DEVICETYPE="eth" - ;; - CTC) - DEVICETYPE="ctc" - ;; - GRE | IPIP | IPIP6) - DEVICETYPE="tunnel" - ;; - SIT | sit) - DEVICETYPE="sit" - ;; - InfiniBand | infiniband) - DEVICETYPE="ib" - ;; - OVS*) - DEVICETYPE="ovs" - ;; + Ethernet) + DEVICETYPE="eth" + ;; + CIPE) + DEVICETYPE="cipcb" + ;; + IPSEC) + DEVICETYPE="ipsec" + ;; + Modem) + DEVICETYPE="ppp" + ;; + xDSL) + DEVICETYPE="ppp" + ;; + ISDN) + DEVICETYPE="ippp" + ;; + Wireless) + DEVICETYPE="eth" + ;; + "Token Ring") + DEVICETYPE="eth" + ;; + CTC) + DEVICETYPE="ctc" + ;; + GRE | IPIP | IPIP6) + DEVICETYPE="tunnel" + ;; + SIT | sit) + DEVICETYPE="sit" + ;; + InfiniBand | infiniband) + DEVICETYPE="ib" + ;; + OVS*) + DEVICETYPE="ovs" + ;; esac if [ -n "$HWADDR" ]; then HWADDR=$(echo $HWADDR | awk '{ print toupper($0) }') @@ -168,7 +169,7 @@ source_config () if [ "${DEVICE}" != "${REALDEVICE}" ]; then ISALIAS=yes else - ISALIAS=no + ISALIAS=no fi if is_nm_running && [ "$REALDEVICE" != "lo" ] ; then nm_con_load "$CONFIG" @@ -193,13 +194,13 @@ ethtool_set() IFS=';'; [ -n "${ETHTOOL_DELAY}" ] && /bin/usleep ${ETHTOOL_DELAY} for opts in $ETHTOOL_OPTS ; do - IFS=$oldifs; + IFS=$oldifs; if [[ "${opts}" =~ [[:space:]]*- ]]; then - /sbin/ethtool $opts + /sbin/ethtool $opts else - /sbin/ethtool -s ${REALDEVICE} $opts + /sbin/ethtool -s ${REALDEVICE} $opts fi - IFS=';'; + IFS=';'; done IFS=$oldifs; } @@ -210,8 +211,8 @@ expand_config () for idx in '' {0..255} ; do ipaddr[$i]=$(eval echo '$'IPADDR$idx) if [ -z "${ipaddr[$i]}" ]; then - [ "$idx" ] && [ $idx -ge 2 ] && break - continue + [ "$idx" ] && [ $idx -ge 2 ] && break + continue fi prefix[$i]=$(eval echo '$'PREFIX$idx) netmask[$i]=$(eval echo '$'NETMASK$idx) @@ -255,30 +256,31 @@ expand_config () toggle_value () { - if [ "$2" = "yes" -o "$2" = "YES" ] ; then - echo "$1 on" - elif [ "$2" = "no" -o "$2" = "NO" ] ; then - echo "$1 off" + if [ "$2" = "yes" -o "$2" = "YES" ] ; then + echo "$1 on" + elif [ "$2" = "no" -o "$2" = "NO" ] ; then + echo "$1 off" else - echo '' + echo '' fi } do_netreport () { - # Notify programs that have requested notification - ( cd /var/run/netreport || exit - for i in * ; do - if [ -f $i ]; then - if [ "$(id -u)" = "0" ]; then - OWNER=$(stat -c %U $i) - su -s /bin/bash $OWNER -c "kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1" > /dev/null 2>&1 - else - kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1 - fi - fi - done - ) + # Notify programs that have requested notification + ( + cd /var/run/netreport || exit + for i in * ; do + if [ -f $i ]; then + if [ "$(id -u)" = "0" ]; then + OWNER=$(stat -c %U $i) + su -s /bin/bash $OWNER -c "kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1" > /dev/null 2>&1 + else + kill -SIGIO $i >/dev/null 2>&1 || rm -f $i >/dev/null 2>&1 + fi + fi + done + ) } is_nm_running () @@ -292,17 +294,17 @@ is_nm_running () is_nm_active () { - LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^${1}:connected$" + LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^${1}:connected$" } is_nm_handling () { - LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$" + LANG=C nmcli -t --fields device,state dev status 2>/dev/null | grep -q "^\(${1}:connected\)\|\(${1}:connecting.*\)$" } is_nm_device_unmanaged () { - LANG=C nmcli -t --fields GENERAL dev show "${1}" 2>/dev/null | awk -F ':' '/GENERAL.STATE/ { if ($2 == "unmanaged") exit 0 ; else exit 1; }' + LANG=C nmcli -t --fields GENERAL dev show "${1}" 2>/dev/null | awk -F ':' '/GENERAL.STATE/ { if ($2 == "unmanaged") exit 0 ; else exit 1; }' } # Sets $alias to the device module if $? != 0 @@ -315,30 +317,31 @@ is_available () [ -n "$BONDING_OPTS" ] && install_bonding_driver $1 alias=$(modprobe -c | awk \ -'BEGIN { alias = ""; } -$1 == "alias" && $2 == "'"$1"'" { alias = $3; } -$1 == "install" { install[$2] = $3; } -END { - cmd = install[alias]; - print alias; - if (alias == "" || alias == "off" || cmd == "/bin/true" || cmd == ":") - exit 1; - exit 0; -}') + 'BEGIN { alias = ""; } + $1 == "alias" && $2 == "'"$1"'" { alias = $3; } + $1 == "install" { install[$2] = $3; } + END { + cmd = install[alias]; + print alias; + if (alias == "" || alias == "off" || cmd == "/bin/true" || cmd == ":") + exit 1; + exit 0; + } + ') [ $? -eq 0 ] || return 2 modprobe $1 > /dev/null 2>&1 || { - return 1 + return 1 } if [ -n "$HWADDR" ]; then - local curdev=$(get_device_by_hwaddr "$HWADDR") - if [ -z "$curdev" ]; then - return 1 - fi + local curdev=$(get_device_by_hwaddr "$HWADDR") + if [ -z "$curdev" ]; then + return 1 + fi fi if [ ${alias} = "bonding" ]; then - install_bonding_driver $1 + install_bonding_driver $1 fi [ -d "/sys/class/net/$1" ] && return 0 || return 1 @@ -362,14 +365,33 @@ is_available_wait () return $ret } +is_hostname_set () +{ + CHECK_HOSTNAME="$(hostname)" + + case "$CHECK_HOSTNAME" in + '(none)' | 'localhost' | 'localhost.localdomain') + # Hostname NOT set: + return 1 + ;; + *) + # Hostname IS set: + return 0 + ;; + esac +} + need_hostname () { - CHECK_HOSTNAME=$(hostname) - if [ "$CHECK_HOSTNAME" = "(none)" -o "$CHECK_HOSTNAME" = "localhost" -o \ - "$CHECK_HOSTNAME" = "localhost.localdomain" ]; then - return 0 + # Should we avoid obtaining hostname from DHCP? (user override) + is_true "${NO_DHCP_HOSTNAME}" && return 1 + + if is_hostname_set; then + # Hostname is already set, we do not need to acquire it: + return 1 else - return 1 + # Hostname is NOT set, we need to acquire it: + return 0 fi } @@ -377,41 +399,41 @@ set_hostname () { hostname $1 if ! grep search /etc/resolv.conf >/dev/null 2>&1; then - domain=$(echo $1 | sed 's/^[^\.]*\.//') - if [ -n "$domain" ]; then - rsctmp=$(mktemp /tmp/XXXXXX); - cat /etc/resolv.conf > $rsctmp - echo "search $domain" >> $rsctmp - change_resolv_conf $rsctmp - /bin/rm -f $rsctmp - fi + domain=$(echo $1 | sed 's/^[^\.]*\.//') + if [ -n "$domain" ]; then + rsctmp=$(mktemp /tmp/XXXXXX); + cat /etc/resolv.conf > $rsctmp + echo "search $domain" >> $rsctmp + change_resolv_conf $rsctmp + /bin/rm -f $rsctmp + fi fi } check_device_down () { - [ ! -d /sys/class/net/$1 ] && return 0 - if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then - return 1 - else - return 0 - fi + [ ! -d /sys/class/net/$1 ] && return 0 + if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then + return 1 + else + return 0 + fi } check_link_down () { - if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then - ip link set dev $1 up >/dev/null 2>&1 - fi - timeout=0 - delay=10 - [ -n "$LINKDELAY" ] && delay=$(($LINKDELAY * 2)) - while [ $timeout -le $delay ]; do - [ "$(cat /sys/class/net/$REALDEVICE/carrier 2>/dev/null)" != "0" ] && return 1 - usleep 500000 - timeout=$((timeout+1)) - done - return 0 + if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then + ip link set dev $1 up >/dev/null 2>&1 + fi + timeout=0 + delay=10 + [ -n "$LINKDELAY" ] && delay=$(($LINKDELAY * 2)) + while [ $timeout -le $delay ]; do + [ "$(cat /sys/class/net/$REALDEVICE/carrier 2>/dev/null)" != "0" ] && return 1 + usleep 500000 + timeout=$((timeout+1)) + done + return 0 } check_default_route () @@ -423,10 +445,10 @@ find_gateway_dev () { . /etc/sysconfig/network if [ -n "${GATEWAY}" -a "${GATEWAY}" != "none" ] ; then - dev=$(LC_ALL=C /sbin/ip route get to "${GATEWAY}" 2>/dev/null | \ - sed -n 's/.* dev \([[:alnum:]]*\) .*/\1/p') - if [ -n "$dev" ]; then - GATEWAYDEV="$dev" + dev=$(LC_ALL=C /sbin/ip route get to "${GATEWAY}" 2>/dev/null | \ + sed -n 's/.* dev \([[:alnum:]]*\) .*/\1/p') + if [ -n "$dev" ]; then + GATEWAYDEV="$dev" fi fi } @@ -442,7 +464,7 @@ add_default_route () check_default_route && return 0 find_gateway_dev if [ "$GATEWAYDEV" != "" -a -n "${GATEWAY}" -a \ - "${GATEWAY}" != "none" ]; then + "${GATEWAY}" != "none" ]; then if ! check_device_down $1; then if [ "$GATEWAY" = "0.0.0.0" ]; then /sbin/ip route add default dev ${GATEWAYDEV} @@ -451,10 +473,10 @@ add_default_route () fi fi elif [ -f /etc/default-routes ]; then - while read spec; do - /sbin/ip route add $spec - done < /etc/default-routes - rm -f /etc/default-routes + while read spec; do + /sbin/ip route add $spec + done < /etc/default-routes + rm -f /etc/default-routes fi } @@ -467,117 +489,130 @@ is_wireless_device () phy_wireless_device () { - cat /sys/class/net/$1/phy80211/name + cat /sys/class/net/$1/phy80211/name +} + +bond_master_exists () +{ + local bond_name + [ -z "${1}" ] && return 1 + [ ! -f /sys/class/net/bonding_masters ] && return 1 + + for bond_name in $(< /sys/class/net/bonding_masters); do + [ "${bond_name}" == "${1}" ] && return 0 + done + return 1 } install_bonding_driver () { - [ ! -f /sys/class/net/bonding_masters ] && ( modprobe bonding || return 1 ) - if ! fgrep -sqx "$1" /sys/class/net/bonding_masters; then - echo "+$1" > /sys/class/net/bonding_masters 2>/dev/null - fi - ( - # Set config here - need_config "$1" - source_config - if [ -f /sys/class/net/${DEVICE}/bonding/slaves ] && [ $(wc -l < /sys/class/net/${DEVICE}/bonding/slaves) -eq 0 ]; then - /sbin/ip link set dev ${DEVICE} down - - # parse options and put them to arrays - for arg in $BONDING_OPTS ; do - bopts_keys[${#bopts_keys[*]}]=${arg%%=*} - bopts_vals[${#bopts_vals[*]}]=${arg##*=} - done - - # add the bits to setup driver parameters here - # first set mode, miimon - for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do - key=${bopts_keys[$idx]} - value=${bopts_vals[$idx]} - - if [ "${key}" = "mode" ] ; then - echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key - bopts_keys[$idx]="" - fi - if [ "${key}" = "miimon" ] ; then - echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key - bopts_keys[$idx]="" - fi - done - - # set all other remaining options - for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do - key=${bopts_keys[$idx]} - value=${bopts_vals[$idx]} - - # option already set; take next - [[ -z "$key" ]] && continue - - if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then - OLDIFS=$IFS; - IFS=','; - for arp_ip in $value; do - if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then - echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key - fi - done - IFS=$OLDIFS; - elif [ "${key}" = "arp_ip_target" ]; then - if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then - echo "$value" > /sys/class/net/${DEVICE}/bonding/$key - fi - elif [ "${key}" != "primary" ]; then - echo $value > /sys/class/net/${DEVICE}/bonding/$key - fi - done - fi - ) - return 0 + if ! bond_master_exists ${1}; then + modprobe bonding || return 1 + echo "+$1" > /sys/class/net/bonding_masters 2>/dev/null + fi + ( + # Set config here + need_config "$1" + source_config + if [ -f /sys/class/net/${DEVICE}/bonding/slaves ] && [ $(wc -l < /sys/class/net/${DEVICE}/bonding/slaves) -eq 0 ]; then + /sbin/ip link set dev ${DEVICE} down + + # parse options and put them to arrays + for arg in $BONDING_OPTS ; do + bopts_keys[${#bopts_keys[*]}]=${arg%%=*} + bopts_vals[${#bopts_vals[*]}]=${arg##*=} + done + + # add the bits to setup driver parameters here + # first set mode, miimon + for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do + key=${bopts_keys[$idx]} + value=${bopts_vals[$idx]} + + if [ "${key}" = "mode" ] ; then + echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key + bopts_keys[$idx]="" + fi + if [ "${key}" = "miimon" ] ; then + echo "${value}" > /sys/class/net/${DEVICE}/bonding/$key + bopts_keys[$idx]="" + fi + done + + # set all other remaining options + for (( idx=0; idx < ${#bopts_keys[*]}; idx++ )) ; do + key=${bopts_keys[$idx]} + value=${bopts_vals[$idx]} + + # option already set; take next + [[ -z "$key" ]] && continue + + if [ "${key}" = "arp_ip_target" -a "${value:0:1}" != "+" ]; then + OLDIFS=$IFS; + IFS=','; + for arp_ip in $value; do + if ! grep -q $arp_ip /sys/class/net/${DEVICE}/bonding/$key; then + echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key + fi + done + IFS=$OLDIFS; + elif [ "${key}" = "arp_ip_target" ]; then + if ! grep -q ${value#+} /sys/class/net/${DEVICE}/bonding/$key; then + echo "$value" > /sys/class/net/${DEVICE}/bonding/$key + fi + elif [ "${key}" != "primary" ]; then + echo $value > /sys/class/net/${DEVICE}/bonding/$key + fi + done + fi + ) + return 0 } is_bonding_device () { - [ -f "/sys/class/net/$1/bonding/slaves" ] + [ -f "/sys/class/net/$1/bonding/slaves" ] } # Invoke this when /etc/resolv.conf has changed: change_resolv_conf () { - s=$(/bin/grep '^[\ \ ]*option' /etc/resolv.conf 2>/dev/null); + s=$(/bin/grep '^[\ \ ]*option' /etc/resolv.conf 2>/dev/null) if [ $# -gt 1 ]; then - if [ "x$s" != "x" ]; then - s="$s"$'\n'; - fi; - n_args=$#; - while [ $n_args -gt 0 ]; - do - case "$s" in *$1*) - shift; - n_args=$(($n_args-1)); - continue;; - esac; - s="$s$1"; - shift; - if [ $# -gt 0 ]; then - s="$s"$'\n'; - fi; - n_args=$(($n_args-1)); - done; + if [ "x$s" != "x" ]; then + s="$s"$'\n' + fi + n_args=$# + while [ $n_args -gt 0 ]; do + case "$s" in + *$1*) + shift + n_args=$(($n_args-1)) + continue + ;; + esac + s="$s$1" + shift + if [ $# -gt 0 ]; then + s="$s"$'\n' + fi + n_args=$(($n_args-1)) + done elif [ $# -eq 1 ]; then - if [ "x$s" != "x" ]; then - s="$s"$'\n'$(/bin/grep -vF "$s" $1); - else - s=$(cat $1); - fi; - fi; - (echo "$s" > /etc/resolv.conf;) >/dev/null 2>&1; + if [ "x$s" != "x" ]; then + s="$s"$'\n'$(/bin/grep -vF "$s" $1) + else + s=$(cat $1) + fi + fi + (echo "$s" > /etc/resolv.conf) >/dev/null 2>&1; r=$? if [ $r -eq 0 ]; then - [ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context - /usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf"; - [ -e /var/run/nscd/socket ] && /usr/sbin/nscd -i hosts; # invalidate cache - fi; - return $r; + [ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context + /usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf" + [ -e /var/run/nscd/socket ] && /usr/sbin/nscd -i hosts # invalidate cache + fi + return $r } # Logging function @@ -586,34 +621,35 @@ change_resolv_conf () # # Default level is 'err'. -net_log() { - local message="$1" - local level="$2" - local name="$3" - - [ -z "$message" ] && return 1 - [ -z "$level" ] && level=err - [ -z "$name" ] && name=$0 - - case $level in - 'debug') - local txt_level=$"DEBUG " - ;; - 'err') - local txt_level=$"ERROR " - ;; - 'warning') - local txt_level=$"WARN " - ;; - 'info') - local txt_level=$"INFO " - ;; - esac - - echo "$txt_level: [$name] $message" - - if [ -x /usr/bin/logger ]; then - /usr/bin/logger -p daemon.$level -t "$name" "$message" - fi - return 0 +net_log() +{ + local message="$1" + local level="$2" + local name="$3" + + [ -z "$message" ] && return 1 + [ -z "$level" ] && level=err + [ -z "$name" ] && name=$0 + + case $level in + 'debug') + local txt_level=$"DEBUG " + ;; + 'err') + local txt_level=$"ERROR " + ;; + 'warning') + local txt_level=$"WARN " + ;; + 'info') + local txt_level=$"INFO " + ;; + esac + + echo "$txt_level: [$name] $message" + + if [ -x /usr/bin/logger ]; then + /usr/bin/logger -p daemon.$level -t "$name" "$message" + fi + return 0 } diff --git a/sysconfig/network-scripts/network-functions-ipv6 b/sysconfig/network-scripts/network-functions-ipv6 index 079a055f..c5d05d7c 100644 --- a/sysconfig/network-scripts/network-functions-ipv6 +++ b/sysconfig/network-scripts/network-functions-ipv6 @@ -15,27 +15,27 @@ # $1: (optional) testflag: currently supported: "testonly" (do not load a module) # return code: 0=ok 2=IPv6 test fails ipv6_test() { - local fn="ipv6_test" + local fn="ipv6_test" - local testflag=$1 + local testflag=$1 - if ! [ -f /proc/net/if_inet6 ]; then - if [ "$testflag" = "testonly" ]; then - return 2 - else - modprobe ipv6 + if ! [ -f /proc/net/if_inet6 ]; then + if [ "$testflag" = "testonly" ]; then + return 2 + else + modprobe ipv6 - if ! [ -f /proc/net/if_inet6 ]; then - return 2 - fi - fi - fi + if ! [ -f /proc/net/if_inet6 ]; then + return 2 + fi + fi + fi - if ! [ -d /proc/sys/net/ipv6/conf/ ]; then - return 2 - fi + if ! [ -d /proc/sys/net/ipv6/conf/ ]; then + return 2 + fi - return 0 + return 0 } ##### Static IPv6 route configuration @@ -46,52 +46,52 @@ ipv6_test() { # $3: [] : (optional) # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem adding route ipv6_add_route() { - local fn="ipv6_add_route" - - local networkipv6=$1 - local gatewayipv6=$2 - local device=$3 # maybe empty - - if [ -z "$networkipv6" ]; then - net_log $"Missing parameter 'IPv6-network' (arg 1)" err $fn - return 1 - fi - - if [ -z "$gatewayipv6" ]; then - net_log $"Missing parameter 'IPv6-gateway' (arg 2)" err $fn - return 1 - fi - - ipv6_test || return 2 - - ipv6_test_ipv6_addr_valid $networkipv6 || return 2 - ipv6_test_ipv6_addr_valid $gatewayipv6 || return 2 - - if [ -z "$device" ]; then - local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 metric 1 2>&1)" - else - if [ "$gatewayipv6" = "::" ]; then - local returntxt="$(/sbin/ip -6 route add $networkipv6 dev $device metric 1 2>&1)" - else - local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 dev $device metric 1 2>&1)" - fi - fi - - if [ -n "$returntxt" ]; then - if echo $returntxt | LC_ALL=C grep -q "File exists"; then - # Netlink: "File exists" - true - elif echo $returntxt | LC_ALL=C grep -q "No route to host"; then - # Netlink: "No route to host" - net_log $"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' through device '$device'" err $fn - return 3 - else - net_log $"Unknown error" err $fn - return 3 - fi - fi - - return 0 + local fn="ipv6_add_route" + + local networkipv6=$1 + local gatewayipv6=$2 + local device=$3 # maybe empty + + if [ -z "$networkipv6" ]; then + net_log $"Missing parameter 'IPv6-network' (arg 1)" err $fn + return 1 + fi + + if [ -z "$gatewayipv6" ]; then + net_log $"Missing parameter 'IPv6-gateway' (arg 2)" err $fn + return 1 + fi + + ipv6_test || return 2 + + ipv6_test_ipv6_addr_valid $networkipv6 || return 2 + ipv6_test_ipv6_addr_valid $gatewayipv6 || return 2 + + if [ -z "$device" ]; then + local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 metric 1 2>&1)" + else + if [ "$gatewayipv6" = "::" ]; then + local returntxt="$(/sbin/ip -6 route add $networkipv6 dev $device metric 1 2>&1)" + else + local returntxt="$(/sbin/ip -6 route add $networkipv6 via $gatewayipv6 dev $device metric 1 2>&1)" + fi + fi + + if [ -n "$returntxt" ]; then + if echo $returntxt | LC_ALL=C grep -q "File exists"; then + # Netlink: "File exists" + true + elif echo $returntxt | LC_ALL=C grep -q "No route to host"; then + # Netlink: "No route to host" + net_log $"'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' through device '$device'" err $fn + return 3 + else + net_log $"Unknown error" err $fn + return 3 + fi + fi + + return 0 } ##### automatic tunneling configuration @@ -99,29 +99,29 @@ ipv6_add_route() { ## Configure automatic tunneling up # return code: 0=ok 2=IPv6 test fails 3=major problem ipv6_enable_autotunnel() { - local fn="ipv6_enable_autotunnel" + local fn="ipv6_enable_autotunnel" - ipv6_test || return 2 + ipv6_test || return 2 - # enable IPv6-over-IPv4 tunnels - if ipv6_test_device_status sit0; then - true - else - # bring up basic tunnel device - /sbin/ip link set sit0 up + # enable IPv6-over-IPv4 tunnels + if ipv6_test_device_status sit0; then + true + else + # bring up basic tunnel device + /sbin/ip link set sit0 up - if ! ipv6_test_device_status sit0; then - net_log $"Tunnel device 'sit0' enabling didn't work" err $fn - return 3 - fi + if ! ipv6_test_device_status sit0; then + net_log $"Tunnel device 'sit0' enabling didn't work" err $fn + return 3 + fi - # Set sysctls proper (regardless "default") - /sbin/sysctl -e -w net.ipv6.conf.sit0.forwarding=1 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_redirects=0 >/dev/null 2>&1 - fi + # Set sysctls proper (regardless "default") + /sbin/sysctl -e -w net.ipv6.conf.sit0.forwarding=1 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_ra=0 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.sit0.accept_redirects=0 >/dev/null 2>&1 + fi - return 0 + return 0 } ##### Interface configuration @@ -131,63 +131,63 @@ ipv6_enable_autotunnel() { # $2: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_add_addr_on_device() { - local fn="ipv6_add_addr_on_device" - - local device=$1 - local address=$2 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$address" ]; then - net_log $"Missing parameter 'IPv6-address' (arg 2)" err $fn - return 1 - fi - - ipv6_test || return 2 - - ipv6_test_ipv6_addr_valid $address || return 1 - - ipv6_test_device_status $device - local result=$? - - if [ "$result" = "0" ]; then - true - elif [ "$result" != "11" ]; then - net_log $"Device '$device' doesn't exist" err $fn - return 3 - else - /sbin/ip link set $device up - - if ! ipv6_test_device_status $device; then - net_log $"Device '$device' enabling didn't work" err $fn - return 3 - fi - fi - - # Extract address parts - local prefixlength_implicit="$(echo $address | awk -F/ '{ print $2 }')" - local address_implicit="${address%%/*}" - - # Check prefix length and using '64' as default - if [ -z "$prefixlength_implicit" ]; then - local prefixlength_implicit="64" - local address="$address_implicit/$prefixlength_implicit" - fi - - /sbin/ip -6 addr add $address dev $device - local result=$? - - if [ $result -eq 2 ]; then - return 0 - elif [ $result -ne 0 ]; then - net_log $"Cannot add IPv6 address '$address' on dev '$device'" err $fn - return 3 - fi - - return 0 + local fn="ipv6_add_addr_on_device" + + local device=$1 + local address=$2 + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + if [ -z "$address" ]; then + net_log $"Missing parameter 'IPv6-address' (arg 2)" err $fn + return 1 + fi + + ipv6_test || return 2 + + ipv6_test_ipv6_addr_valid $address || return 1 + + ipv6_test_device_status $device + local result=$? + + if [ "$result" = "0" ]; then + true + elif [ "$result" != "11" ]; then + net_log $"Device '$device' doesn't exist" err $fn + return 3 + else + /sbin/ip link set $device up + + if ! ipv6_test_device_status $device; then + net_log $"Device '$device' enabling didn't work" err $fn + return 3 + fi + fi + + # Extract address parts + local prefixlength_implicit="$(echo $address | awk -F/ '{ print $2 }')" + local address_implicit="${address%%/*}" + + # Check prefix length and using '64' as default + if [ -z "$prefixlength_implicit" ]; then + local prefixlength_implicit="64" + local address="$address_implicit/$prefixlength_implicit" + fi + + /sbin/ip -6 addr replace $address dev $device + local result=$? + + if [ $result -eq 2 ]; then + return 0 + elif [ $result -ne 0 ]; then + net_log $"Cannot add IPv6 address '$address' on dev '$device'" err $fn + return 3 + fi + + return 0 } @@ -195,28 +195,28 @@ ipv6_add_addr_on_device() { # $1: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_cleanup_device() { - local fn="ipv6_cleanup_device" + local fn="ipv6_cleanup_device" - local device=$1 + local device=$1 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - # Remove all IPv6 routes through this device (but not "lo") - if [ "$device" != "lo" ]; then - /sbin/ip -6 route flush dev $device scope global >/dev/null 2>&1 - /sbin/ip -6 route flush dev $device scope site >/dev/null 2>&1 - fi + # Remove all IPv6 routes through this device (but not "lo") + if [ "$device" != "lo" ]; then + /sbin/ip -6 route flush dev $device scope global >/dev/null 2>&1 + /sbin/ip -6 route flush dev $device scope site >/dev/null 2>&1 + fi - # Remove all IPv6 addresses on this interface - /sbin/ip -6 addr flush dev $device scope global >/dev/null 2>&1 - /sbin/ip -6 addr flush dev $device scope site >/dev/null 2>&1 + # Remove all IPv6 addresses on this interface + /sbin/ip -6 addr flush dev $device scope global >/dev/null 2>&1 + /sbin/ip -6 addr flush dev $device scope site >/dev/null 2>&1 - return 0 + return 0 } @@ -224,28 +224,28 @@ ipv6_cleanup_device() { # $1: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_cleanup_6to4_device() { - local fn="ipv6_cleanup_6to4_device" + local fn="ipv6_cleanup_6to4_device" - local device=$1 + local device=$1 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - # Cleanup 6to4 addresses on this device - /sbin/ip -6 addr show dev $dev scope global permanent | awk '/\/ && $2 ~ /^2002:/ { print $2 }' | while read addr; do - /sbin/ip -6 addr del ${addr} dev ${dev} - done + # Cleanup 6to4 addresses on this device + /sbin/ip -6 addr show dev $device scope global permanent | awk '/\/ && $2 ~ /^2002:/ { print $2 }' | while read addr; do + /sbin/ip -6 addr del ${addr} dev ${device} + done - # Get all IPv6 routes through given interface related to 6to4 and remove them - /sbin/ip -6 route show dev $device | LC_ALL=C grep "^2002:" | while read ipv6net dummy; do - /sbin/ip -6 route del $ipv6net dev $device - done + # Get all IPv6 routes through given interface related to 6to4 and remove them + /sbin/ip -6 route show dev $device | LC_ALL=C grep "^2002:" | while read ipv6net dummy; do + /sbin/ip -6 route del $ipv6net dev $device + done - return 0 + return 0 } @@ -255,7 +255,7 @@ ipv6_cleanup_6to4_device() { # $1: # return code: 0=ok 1=not valid ipv6_test_ipv6_addr_valid() { - ipcalc -cs6 $1 + ipcalc -cs6 $1 } @@ -263,7 +263,7 @@ ipv6_test_ipv6_addr_valid() { # $1: # return code: 0=ok 1=not valid ipv6_test_ipv4_addr_valid() { - ipcalc -cs4 $1 + ipcalc -cs4 $1 } @@ -271,32 +271,32 @@ ipv6_test_ipv4_addr_valid() { # $1: # return code: 0=ok 1=argument error 10=private or not unicast ipv6_test_ipv4_addr_global_usable() { - local fn="ipv6_test_ipv4_addr_global_usable" - - local testipv4addr_globalusable=$1 - - - if [ -z "$testipv4addr_globalusable" ]; then - return 1 - fi - - # Test for a globally usable IPv4 address now - # test 0.0.0.0/8 - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=0\.0\.0\.0" && return 10 - # test 10.0.0.0/8 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=10\.0\.0\.0" && return 10 - # test 127.0.0.0/8 (loopback) - /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=127\.0\.0\.0" && return 10 - # test 169.254.0.0/16 (APIPA / DHCP link local) - /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=169\.254\.0\.0" && return 10 - # test 172.16.0.0/12 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.240.0.0 | LC_ALL=C grep -q "NETWORK=172\.16\.0\.0" && return 10 - # test 192.168.0.0/16 (RFC 1918 / private) - /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=192\.168\.0\.0" && return 10 - # test 224.0.0.0/3 (multicast and reserved, broadcast) - /bin/ipcalc --network $testipv4addr_globalusable 224.0.0.0 | LC_ALL=C grep -q "NETWORK=224\.0\.0\.0" && return 10 - - return 0 + local fn="ipv6_test_ipv4_addr_global_usable" + + local testipv4addr_globalusable=$1 + + + if [ -z "$testipv4addr_globalusable" ]; then + return 1 + fi + + # Test for a globally usable IPv4 address now + # test 0.0.0.0/8 + /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=0\.0\.0\.0" && return 10 + # test 10.0.0.0/8 (RFC 1918 / private) + /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=10\.0\.0\.0" && return 10 + # test 127.0.0.0/8 (loopback) + /bin/ipcalc --network $testipv4addr_globalusable 255.0.0.0 | LC_ALL=C grep -q "NETWORK=127\.0\.0\.0" && return 10 + # test 169.254.0.0/16 (APIPA / DHCP link local) + /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=169\.254\.0\.0" && return 10 + # test 172.16.0.0/12 (RFC 1918 / private) + /bin/ipcalc --network $testipv4addr_globalusable 255.240.0.0 | LC_ALL=C grep -q "NETWORK=172\.16\.0\.0" && return 10 + # test 192.168.0.0/16 (RFC 1918 / private) + /bin/ipcalc --network $testipv4addr_globalusable 255.255.0.0 | LC_ALL=C grep -q "NETWORK=192\.168\.0\.0" && return 10 + # test 224.0.0.0/3 (multicast and reserved, broadcast) + /bin/ipcalc --network $testipv4addr_globalusable 224.0.0.0 | LC_ALL=C grep -q "NETWORK=224\.0\.0\.0" && return 10 + + return 0 } @@ -304,29 +304,29 @@ ipv6_test_ipv4_addr_global_usable() { # $1: # return code: 0=ok 1=argument error 10=not exists 11=down ipv6_test_device_status() { - local fn="ipv6_test_device_status" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - # Test if device exists - if [ ! -d "/sys/class/net/${device}" ]; then - # not exists - return 10 - fi - - # Test if device is up - if /sbin/ip link show dev $device 2>/dev/null | LC_ALL=C grep -q "UP"; then - # up - return 0 - else - # down - return 11 - fi + local fn="ipv6_test_device_status" + + local device=$1 + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + # Test if device exists + if [ ! -d "/sys/class/net/${device}" ]; then + # not exists + return 10 + fi + + # Test if device is up + if /sbin/ip link show dev $device 2>/dev/null | LC_ALL=C grep -q "UP"; then + # up + return 0 + else + # down + return 11 + fi } @@ -335,38 +335,38 @@ ipv6_test_device_status() { # stdout: <6to4address> # return code: 0=ok 1=argument error ipv6_create_6to4_prefix() { - local fn="ipv6_create_6to4_prefix" - - local ipv4addr=$1 - - if [ -z "$ipv4addr" ]; then - net_log $"Missing parameter 'IPv4 address' (arg 1)" err $fn - fi - - local major1="${ipv4addr%%.*}" - local minor1="$(echo $ipv4addr | awk -F. '{ print $2 }')" - local major2="$(echo $ipv4addr | awk -F. '{ print $3 }')" - local minor2="$(echo $ipv4addr | awk -F. '{ print $4 }')" - - if [ -z "$major1" -o -z "$minor1" -o -z "$major2" -o -z "$minor2" ]; then - return 1 - fi - - if [ $major1 -eq 0 ]; then - local block1="$(printf "%x" $minor1)" - else - local block1="$(printf "%x%02x" $major1 $minor1)" - fi - if [ $major2 -eq 0 ]; then - local block2="$(printf "%x" $minor2)" - else - local block2="$(printf "%x%02x" $major2 $minor2)" - fi - - local prefix6to4="2002:$block1:$block2" - - echo "$prefix6to4" - return 0 + local fn="ipv6_create_6to4_prefix" + + local ipv4addr=$1 + + if [ -z "$ipv4addr" ]; then + net_log $"Missing parameter 'IPv4 address' (arg 1)" err $fn + fi + + local major1="${ipv4addr%%.*}" + local minor1="$(echo $ipv4addr | awk -F. '{ print $2 }')" + local major2="$(echo $ipv4addr | awk -F. '{ print $3 }')" + local minor2="$(echo $ipv4addr | awk -F. '{ print $4 }')" + + if [ -z "$major1" -o -z "$minor1" -o -z "$major2" -o -z "$minor2" ]; then + return 1 + fi + + if [ $major1 -eq 0 ]; then + local block1="$(printf "%x" $minor1)" + else + local block1="$(printf "%x%02x" $major1 $minor1)" + fi + if [ $major2 -eq 0 ]; then + local block2="$(printf "%x" $minor2)" + else + local block2="$(printf "%x%02x" $major2 $minor2)" + fi + + local prefix6to4="2002:$block1:$block2" + + echo "$prefix6to4" + return 0 } @@ -375,33 +375,33 @@ ipv6_create_6to4_prefix() { # stdout: # return code: 0=ok 1=argument error ipv6_create_6to4_relay_address() { - local fn="ipv6_create_6to4_relay_address" - - local addr=$1 - - if [ -z "$addr" ]; then - net_log $"Missing parameter 'address' (arg 1)" err $fn - return 1 - fi - - # Check - if ipv6_test_ipv4_addr_valid $addr ; then - # ok, a IPv4 one - if ipv6_test_ipv4_addr_global_usable $addr; then - # IPv4 globally usable - local ipv6to4_relay="::$addr" - else - net_log $"Given address '$addr' is not a global IPv4 one (arg 1)" err $fn - return 1 - fi - else - net_log $"Given address '$addr' is not a valid IPv4 one (arg 1)" err $fn - return 1 - fi - - echo "$ipv6to4_relay" - - return 0 + local fn="ipv6_create_6to4_relay_address" + + local addr=$1 + + if [ -z "$addr" ]; then + net_log $"Missing parameter 'address' (arg 1)" err $fn + return 1 + fi + + # Check + if ipv6_test_ipv4_addr_valid $addr ; then + # ok, a IPv4 one + if ipv6_test_ipv4_addr_global_usable $addr; then + # IPv4 globally usable + local ipv6to4_relay="::$addr" + else + net_log $"Given address '$addr' is not a global IPv4 one (arg 1)" err $fn + return 1 + fi + else + net_log $"Given address '$addr' is not a valid IPv4 one (arg 1)" err $fn + return 1 + fi + + echo "$ipv6to4_relay" + + return 0 } @@ -415,65 +415,65 @@ ipv6_create_6to4_relay_address() { # $5: [] : local IPv4 address of tunnel interface (required in case of 6to4 behind NAT) # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_add_6to4_tunnel() { - local fn="ipv6_add_6to4_tunnel" - - local device=$1 - local globalipv4=$2 - local globalipv6to4suffix=$3 - local mtu=$4 - local localipv4=$5 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$globalipv4" ]; then - net_log $"Missing parameter 'global IPv4 address' (arg 2)" err $fn - return 1 - fi - - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi - - # Copy global IPv4 address to local if last one is not given - if [ -z "$localipv4" ]; then - localipv4="$globalipv4" - fi - - ipv6_test || return 2 - - # Generate 6to4 address - local prefix6to4="$(ipv6_create_6to4_prefix $globalipv4)" - if [ $? -ne 0 -o -z "$prefix6to4" ]; then - return 3 - fi - - if [ -z "$globalipv6to4suffix" ]; then - local address6to4="${prefix6to4}::1/16" - else - local address6to4="${prefix6to4}::${globalipv6to4suffix}/16" - fi - - ipv6_add_tunnel_device tun6to4 0.0.0.0 $address6to4 $localipv4 - if [ $? -ne 0 ]; then - local retval=3 - else - local retval=0 - fi - - # Add unspecific unreachable route for local 6to4 address space - /sbin/ip route add unreach ${prefix6to4}::/48 - - # Set MTU, if given - if [ -n "$mtu" ]; then - ipv6_set_mtu $device $mtu - fi - - return $retval + local fn="ipv6_add_6to4_tunnel" + + local device=$1 + local globalipv4=$2 + local globalipv6to4suffix=$3 + local mtu=$4 + local localipv4=$5 + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + if [ -z "$globalipv4" ]; then + net_log $"Missing parameter 'global IPv4 address' (arg 2)" err $fn + return 1 + fi + + # Check device + if [ "$device" != "tun6to4" ]; then + net_log $"Given device '$device' is not supported (arg 1)" err $fn + return 1 + fi + + # Copy global IPv4 address to local if last one is not given + if [ -z "$localipv4" ]; then + localipv4="$globalipv4" + fi + + ipv6_test || return 2 + + # Generate 6to4 address + local prefix6to4="$(ipv6_create_6to4_prefix $globalipv4)" + if [ $? -ne 0 -o -z "$prefix6to4" ]; then + return 3 + fi + + if [ -z "$globalipv6to4suffix" ]; then + local address6to4="${prefix6to4}::1/16" + else + local address6to4="${prefix6to4}::${globalipv6to4suffix}/16" + fi + + ipv6_add_tunnel_device tun6to4 0.0.0.0 $address6to4 $localipv4 + if [ $? -ne 0 ]; then + local retval=3 + else + local retval=0 + fi + + # Add unspecific unreachable route for local 6to4 address space + /sbin/ip route add unreach ${prefix6to4}::/48 + + # Set MTU, if given + if [ -n "$mtu" ]; then + ipv6_set_mtu $device $mtu + fi + + return $retval } @@ -481,31 +481,31 @@ ipv6_add_6to4_tunnel() { # $1: : only "tun6to4" is supported # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_cleanup_6to4_tunnels() { - local fn="ipv6_cleanup_6to4_tunnels" + local fn="ipv6_cleanup_6to4_tunnels" - local device=$1 + local device=$1 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi + # Check device + if [ "$device" != "tun6to4" ]; then + net_log $"Given device '$device' is not supported (arg 1)" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - ipv6_del_tunnel_device tun6to4 + ipv6_del_tunnel_device tun6to4 - # Remove all unspecific unreachable routes for local 6to4 address space - /sbin/ip -6 route | LC_ALL=C grep "^unreachable 2002:.*/48 dev lo" | while read token net rest; do - /sbin/ip route del unreach $net - done + # Remove all unspecific unreachable routes for local 6to4 address space + /sbin/ip -6 route | LC_ALL=C grep "^unreachable 2002:.*/48 dev lo" | while read token net rest; do + /sbin/ip route del unreach $net + done - return 0 + return 0 } @@ -514,36 +514,36 @@ ipv6_cleanup_6to4_tunnels() { # $2: : global address of local interface # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_del_6to4_tunnel() { - local fn="ipv6_del_6to4_tunnel" + local fn="ipv6_del_6to4_tunnel" - local device=$1 - local localipv4=$2 + local device=$1 + local localipv4=$2 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - if [ -z "$localipv4" ]; then - net_log $"Missing parameter 'local IPv4 address' (arg 2)" err $fn - return 1 - fi + if [ -z "$localipv4" ]; then + net_log $"Missing parameter 'local IPv4 address' (arg 2)" err $fn + return 1 + fi - # Check device - if [ "$device" != "tun6to4" ]; then - net_log $"Given device '$device' is not supported (arg 1)" err $fn - return 1 - fi + # Check device + if [ "$device" != "tun6to4" ]; then + net_log $"Given device '$device' is not supported (arg 1)" err $fn + return 1 + fi - ipv6_test || return 2 + ipv6_test || return 2 - ipv6_del_tunnel_device tun6to4 - local retval=$? + ipv6_del_tunnel_device tun6to4 + local retval=$? - # Remove unspecific unreachable route for local 6to4 address space - /sbin/ip route del unreach ${prefix6to4}::/48 + # Remove unspecific unreachable route for local 6to4 address space + /sbin/ip route del unreach ${prefix6to4}::/48 - return $retval + return $retval } @@ -554,80 +554,80 @@ ipv6_del_6to4_tunnel() { # $4: [] : local one of tunnel (optional) # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_add_tunnel_device() { - local fn="ipv6_add_tunnel_device" - - local device=$1 - local addressipv4tunnel=$2 - local addressipv6local=$3 - local addressipv4tunnellocal=$4 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - if [ -z "$addressipv4tunnel" ]; then - net_log $"Missing parameter 'IPv4-tunnel address' (arg 2)" err $fn - return 1 - fi - - if [ -z "$addressipv4tunnellocal" ]; then - local addressipv4tunnellocal="any" - fi - - ipv6_test || return 2 - - if ! ipv6_test_device_status $device; then - local ttldefault="$(/sbin/sysctl -e net.ipv4.ip_default_ttl | awk '{ print $3 }')" - if [ -z "$ttldefault" ]; then - local ttldefault=64 - fi - - # Test whether remote IPv4 address was already applied to another tunnel - if [ "$addressipv4tunnel" != "0.0.0.0" -a "$addressipv4tunnel" != "any" ]; then - /sbin/ip tunnel show remote $addressipv4tunnel 2>/dev/null | LC_ALL=C grep -w "ipv6/ip" | while IFS=":" read devnew rest; do - if [ "$devnew" != "$device" ]; then - net_log $"Given remote address '$addressipv4tunnel' on tunnel device '$device' is already configured on device '$devnew'" err $fn - return 3 - fi - done - fi - - /sbin/ip tunnel add $device mode sit ttl $ttldefault remote $addressipv4tunnel local $addressipv4tunnellocal - if [ $? -ne 0 ]; then - return 3 - fi - - # Test, whether "ip tunnel show" reports valid content - if ! /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "remote"; then - net_log $"Tunnel device '$device' creation didn't work" err $fn - return 3 - fi - - /sbin/ip link set $device up - - if ! ipv6_test_device_status $device; then - net_log $"Tunnel device '$device' bringing up didn't work" err $fn - return 3 - fi - - # Set sysctls proper (regardless "default") - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=1 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 - /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 - - if [ -n "$addressipv6local" ]; then - # Setup P-t-P address - ipv6_add_addr_on_device $device $addressipv6local - if [ $? -ne 0 ]; then - return 3 - fi - fi - else - false - fi - - return 0 + local fn="ipv6_add_tunnel_device" + + local device=$1 + local addressipv4tunnel=$2 + local addressipv6local=$3 + local addressipv4tunnellocal=$4 + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + if [ -z "$addressipv4tunnel" ]; then + net_log $"Missing parameter 'IPv4-tunnel address' (arg 2)" err $fn + return 1 + fi + + if [ -z "$addressipv4tunnellocal" ]; then + local addressipv4tunnellocal="any" + fi + + ipv6_test || return 2 + + if ! ipv6_test_device_status $device; then + local ttldefault="$(/sbin/sysctl -e net.ipv4.ip_default_ttl | awk '{ print $3 }')" + if [ -z "$ttldefault" ]; then + local ttldefault=64 + fi + + # Test whether remote IPv4 address was already applied to another tunnel + if [ "$addressipv4tunnel" != "0.0.0.0" -a "$addressipv4tunnel" != "any" ]; then + /sbin/ip tunnel show remote $addressipv4tunnel 2>/dev/null | LC_ALL=C grep -w "ipv6/ip" | while IFS=":" read devnew rest; do + if [ "$devnew" != "$device" ]; then + net_log $"Given remote address '$addressipv4tunnel' on tunnel device '$device' is already configured on device '$devnew'" err $fn + return 3 + fi + done + fi + + /sbin/ip tunnel add $device mode sit ttl $ttldefault remote $addressipv4tunnel local $addressipv4tunnellocal + if [ $? -ne 0 ]; then + return 3 + fi + + # Test, whether "ip tunnel show" reports valid content + if ! /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "remote"; then + net_log $"Tunnel device '$device' creation didn't work" err $fn + return 3 + fi + + /sbin/ip link set $device up + + if ! ipv6_test_device_status $device; then + net_log $"Tunnel device '$device' bringing up didn't work" err $fn + return 3 + fi + + # Set sysctls proper (regardless "default") + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=1 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1 + /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1 + + if [ -n "$addressipv6local" ]; then + # Setup P-t-P address + ipv6_add_addr_on_device $device $addressipv6local + if [ $? -ne 0 ]; then + return 3 + fi + fi + else + false + fi + + return 0 } @@ -635,54 +635,54 @@ ipv6_add_tunnel_device() { # $1: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_del_tunnel_device() { - local fn="ipv6_del_tunnel_device" - - local device=$1 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi - - ipv6_test testonly || return 2 - - if ipv6_test_device_status $device; then - ipv6_cleanup_device $device - else - if [ "$device" != "sit0" ]; then - false - fi - fi - - if [ "$device" != "sit0" ]; then - if /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "ipv6/ip"; then - /sbin/ip tunnel del $device - - if ipv6_test_device_status $device; then - return 3 - fi - else - false - fi - fi - - return 0 + local fn="ipv6_del_tunnel_device" + + local device=$1 + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + ipv6_test testonly || return 2 + + if ipv6_test_device_status $device; then + ipv6_cleanup_device $device + else + if [ "$device" != "sit0" ]; then + false + fi + fi + + if [ "$device" != "sit0" ]; then + if /sbin/ip tunnel show $device 2>/dev/null | LC_ALL=C grep -q -w "ipv6/ip"; then + /sbin/ip tunnel del $device + + if ipv6_test_device_status $device; then + return 3 + fi + else + false + fi + fi + + return 0 } ## Cleanup all dedicated tunnel devices ipv6_cleanup_tunnel_devices() { - local fn="ipv6_cleanup_tunnel_devices" + local fn="ipv6_cleanup_tunnel_devices" - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - # Find still existing tunnel devices and shutdown and delete them + # Find still existing tunnel devices and shutdown and delete them - /sbin/ip tunnel show | awk -F: '/\/ { print $1 }' | while read device; do - ipv6_del_tunnel_device $device - done + /sbin/ip tunnel show | awk -F: '/\/ { print $1 }' | while read device; do + ipv6_del_tunnel_device $device + done - return 0 + return 0 } @@ -692,52 +692,52 @@ ipv6_cleanup_tunnel_devices() { # stdout: if available # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_get_ipv4addr_of_tunnel() { - local fn="ipv6_get_local_ipv4_of_tunnel" + local fn="ipv6_get_local_ipv4_of_tunnel" - local device=$1 - local selection=$2 + local device=$1 + local selection=$2 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - if [ -z "$selection" ]; then - net_log $"Missing parameter 'selection' (arg 2)" err $fn - return 1 - fi - if [ "$selection" != "local" -a "$selection" != "remote" ]; then - net_log $"Unsupported selection '$selection' specified (arg 2)" err $fn - return 1 - fi + if [ -z "$selection" ]; then + net_log $"Missing parameter 'selection' (arg 2)" err $fn + return 1 + fi + if [ "$selection" != "local" -a "$selection" != "remote" ]; then + net_log $"Unsupported selection '$selection' specified (arg 2)" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - ipv6_test_device_status $device + ipv6_test_device_status $device - if [ $? != 0 -a $? != 11 ]; then - # Device doesn't exist - return 3 - fi + if [ $? != 0 -a $? != 11 ]; then + # Device doesn't exist + return 3 + fi - # Device exists, retrieve address - if [ "$selection" = "local" ]; then - local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $6 }')" - elif [ "$selection" = "remote" ]; then - local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $4 }')" - fi + # Device exists, retrieve address + if [ "$selection" = "local" ]; then + local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $6 }')" + elif [ "$selection" = "remote" ]; then + local tunnel_local_ipv4addr="$(/sbin/ip tunnel show $device | awk '{ print $4 }')" + fi - if [ $? != 0 ]; then - return 3 - fi + if [ $? != 0 ]; then + return 3 + fi - if [ "$tunnel_local_ipv4addr" = "any" ]; then - local tunnel_local_ipv4addr="0.0.0.0" - fi + if [ "$tunnel_local_ipv4addr" = "any" ]; then + local tunnel_local_ipv4addr="0.0.0.0" + fi - echo "$tunnel_local_ipv4addr" + echo "$tunnel_local_ipv4addr" - return 0 + return 0 } @@ -746,36 +746,36 @@ ipv6_get_ipv4addr_of_tunnel() { # stdout: if available # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem (more than one IPv4 address applied) ipv6_get_ipv4addr_of_device() { - local fn="ipv6_get_ipv4addr_of_device" + local fn="ipv6_get_ipv4addr_of_device" - local device=$1 + local device=$1 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - ipv6_test_device_status $device + ipv6_test_device_status $device - if [ $? != 0 -a $? != 11 ]; then - # Device doesn't exist - return 3 - fi + if [ $? != 0 -a $? != 11 ]; then + # Device doesn't exist + return 3 + fi - # Device exists, retrieve the first address only - local ipv4addr="$(/sbin/ip -o -4 addr show dev $device | awk '{ print $4 }' | awk -F/ '{ print $1; exit }')" + # Device exists, retrieve the first address only + local ipv4addr="$(/sbin/ip -o -4 addr show dev $device | awk '{ print $4 }' | awk -F/ '{ print $1; exit }')" - if [ $? != 0 ]; then - return 3 - fi + if [ $? != 0 ]; then + return 3 + fi - if [ "$ipv4addr" = "any" ]; then - local ipv4addr="0.0.0.0" - fi + if [ "$ipv4addr" = "any" ]; then + local ipv4addr="0.0.0.0" + fi - echo "$ipv4addr" + echo "$ipv4addr" - return 0 + return 0 } @@ -784,33 +784,33 @@ ipv6_get_ipv4addr_of_device() { # $2: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_set_mtu() { - local fn="ipv6_set_mtu" + local fn="ipv6_set_mtu" - local device=$1 - local ipv6_mtu=$2 + local device=$1 + local ipv6_mtu=$2 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - if [ -z "$ipv6_mtu" ]; then - net_log $"Missing parameter 'IPv6 MTU' (arg 2)" err $fn - return 1 - fi + if [ -z "$ipv6_mtu" ]; then + net_log $"Missing parameter 'IPv6 MTU' (arg 2)" err $fn + return 1 + fi - # Check range - if [ $ipv6_mtu -lt 1280 -o $ipv6_mtu -gt 65535 ]; then - net_log $"Given IPv6 MTU '$ipv6_mtu' is out of range" err $fn - return 1 - fi + # Check range + if [ $ipv6_mtu -lt 1280 -o $ipv6_mtu -gt 65535 ]; then + net_log $"Given IPv6 MTU '$ipv6_mtu' is out of range" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - # Set value - /sbin/ip link set dev $device mtu $ipv6_mtu + # Set value + /sbin/ip link set dev $device mtu $ipv6_mtu - return 0 + return 0 } @@ -820,92 +820,92 @@ ipv6_set_mtu() { # $3: : (optional) device to check scope and gateway device against (setup is skipped, if not matching) # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_set_default_route() { - local fn="ipv6_set_default_route" - - local address=$1 - local device=$2 - local device_check=$3 - - ipv6_test testonly || return 2 - - # Map the unspecified address to nothing - if [ "$address" = "::" ]; then - local address="" - fi - - if [ -n "$address" ]; then - local addressgw=${address%%%*} - local device_scope=$(echo $address | awk -F% '{ print $2 }') - - if [ -z "$addressgw" ]; then - net_log $"Given IPv6 default gateway '$address' is not in proper format" err $fn - return 3 - fi - - # Scope device has precedence - if [ -n "$device_scope" -a -n "$device" -a "$device_scope" != "$device" ]; then - net_log $"Given IPv6 default gateway '$address' has scope '$device_scope' defined, given default gateway device '$device' will be not used" info $fn - local device="" - fi - - # Link local addresses require a device - if echo $addressgw | LC_ALL=C grep -qi "^fe80:"; then - if [ -z "$device_scope" ]; then - if [ -z "$device" ]; then - net_log $"Given IPv6 default gateway '$address' is link-local, but no scope or gateway device is specified" err $fn - return 3 - fi - fi - fi - - # Check whether the route belongs to the specific given interface - if [ -n "$device_check" ]; then - # Check whether scope device matches given check device - if [ -n "$device_scope" -a "$device_check" != "$device_scope" ]; then - # scope device != specific given -> skip - return 0 - elif [ -n "$device" -a "$device_check" != "$device" ]; then - # gateway device != specific given -> skip - return 0 - fi - fi - - # Set device now, if not given - if [ -z "$device" ]; then - local device="$device_scope" - fi - - if [ -z "$device" ]; then - # Note: this can cause a warning and a not installed route, if given address is not reachable on the link - ipv6_add_route ::/0 $addressgw - else - ipv6_add_route ::/0 $addressgw $device - fi - elif [ -n "$device" ]; then - # Check whether the route belongs to the specific given interface - if [ -n "$device_check" -a "$device_check" != "$device" ]; then - # gateway device != specific given -> skip - return 0 - fi - - ipv6_test_route_requires_next_hop $device - local result=$? - - if [ $result = 0 ]; then - net_log $"Given IPv6 default device '$device' requires an explicit nexthop" err $fn - return 3 - elif [ $result != 10 ]; then - net_log $"Given IPv6 default device '$device' doesn't exist or isn't up" err $fn - return 3 - fi - - ipv6_add_route ::/0 :: $device - else - net_log $"No parameters given to setup a default route" err $fn - return 3 - fi - - return 0 + local fn="ipv6_set_default_route" + + local address=$1 + local device=$2 + local device_check=$3 + + ipv6_test testonly || return 2 + + # Map the unspecified address to nothing + if [ "$address" = "::" ]; then + local address="" + fi + + if [ -n "$address" ]; then + local addressgw=${address%%%*} + local device_scope=$(echo $address | awk -F% '{ print $2 }') + + if [ -z "$addressgw" ]; then + net_log $"Given IPv6 default gateway '$address' is not in proper format" err $fn + return 3 + fi + + # Scope device has precedence + if [ -n "$device_scope" -a -n "$device" -a "$device_scope" != "$device" ]; then + net_log $"Given IPv6 default gateway '$address' has scope '$device_scope' defined, given default gateway device '$device' will be not used" info $fn + local device="" + fi + + # Link local addresses require a device + if echo $addressgw | LC_ALL=C grep -qi "^fe80:"; then + if [ -z "$device_scope" ]; then + if [ -z "$device" ]; then + net_log $"Given IPv6 default gateway '$address' is link-local, but no scope or gateway device is specified" err $fn + return 3 + fi + fi + fi + + # Check whether the route belongs to the specific given interface + if [ -n "$device_check" ]; then + # Check whether scope device matches given check device + if [ -n "$device_scope" -a "$device_check" != "$device_scope" ]; then + # scope device != specific given -> skip + return 0 + elif [ -n "$device" -a "$device_check" != "$device" ]; then + # gateway device != specific given -> skip + return 0 + fi + fi + + # Set device now, if not given + if [ -z "$device" ]; then + local device="$device_scope" + fi + + if [ -z "$device" ]; then + # Note: this can cause a warning and a not installed route, if given address is not reachable on the link + ipv6_add_route ::/0 $addressgw + else + ipv6_add_route ::/0 $addressgw $device + fi + elif [ -n "$device" ]; then + # Check whether the route belongs to the specific given interface + if [ -n "$device_check" -a "$device_check" != "$device" ]; then + # gateway device != specific given -> skip + return 0 + fi + + ipv6_test_route_requires_next_hop $device + local result=$? + + if [ $result = 0 ]; then + net_log $"Given IPv6 default device '$device' requires an explicit nexthop" err $fn + return 3 + elif [ $result != 10 ]; then + net_log $"Given IPv6 default device '$device' doesn't exist or isn't up" err $fn + return 3 + fi + + ipv6_add_route ::/0 :: $device + else + net_log $"No parameters given to setup a default route" err $fn + return 3 + fi + + return 0 } @@ -913,32 +913,32 @@ ipv6_set_default_route() { # $1: # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem 10=needs no explicit hop ipv6_test_route_requires_next_hop() { - local fn="ipv6_test_route_requires_next_hop" + local fn="ipv6_test_route_requires_next_hop" - local device=$1 + local device=$1 - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 - fi + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi - ipv6_test testonly || return 2 + ipv6_test testonly || return 2 - ipv6_test_device_status $device + ipv6_test_device_status $device - if [ $? != 0 ]; then - return 3 - fi + if [ $? != 0 ]; then + return 3 + fi - if [ "$device" = "sit0" ]; then - return 10 - fi + if [ "$device" = "sit0" ]; then + return 10 + fi - if /sbin/ip -o link show $device 2>/dev/null | LC_ALL=C grep -q "POINTOPOINT"; then - return 10 - fi + if /sbin/ip -o link show $device 2>/dev/null | LC_ALL=C grep -q "POINTOPOINT"; then + return 10 + fi - return 0 + return 0 } @@ -946,120 +946,139 @@ ipv6_test_route_requires_next_hop() { # $1: up|down : device reason for triggering (coming up or going down) # $2: [startstop|restart|reload|SIGHUP] : triger mechanism (default is "SIGHUP") # "startstop" : reason=up -> start, reason=down -> stop -# $3: [] : alternative pid file [optional] +# $3: [] : alternative pid file [optional] # return code: 0=ok 1=argument error 2=IPv6 test fails 3=major problem ipv6_trigger_radvd() { - local fn="ipv6_trigger_radvd" - - local reason=$1 - local mechanism=$2 - local pidfile=$3 - - if [ -z "$reason" ]; then - net_log $"No reason given for sending trigger to radvd" err $fn - return 1 - fi - - if [ "$reason" != "up" -a "$reason" != "down" ]; then - net_log $"Unsupported reason '$reason' for sending trigger to radvd" err $fn - return 1 - fi - - if [ -z "$mechanism" ]; then - # Take default - local mechanism="SIGHUP" - fi - - if [ -z "$pidfile" ]; then - local pidfile="/var/run/radvd/radvd.pid" - fi - - # Print message and select action - case $mechanism in - 'startstop') - case $reason in - up) - local action="start" - ;; - down) - local action="stop" - ;; - esac - ;; - 'reload'|'restart'|'SIGHUP') - local action="$mechanism" - ;; - *) - net_log $"Unsupported mechanism '$mechanism' for sending trigger to radvd" err $fn - return 3 - ;; - esac - - # PID file needed? - if [ "$action" = "SIGHUP" ]; then - if ! [ -f "$pidfile" ]; then - if [ "$reason" = "down" ]; then - # be quiet because triggering may have been disabled - true - else - net_log $"Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd" err $fn - fi - return 3 - fi - - # Get PID - local pid="$(cat $pidfile)" - if [ -z "$pid" ]; then - # pidfile empty - strange - net_log $"Pidfile '$pidfile' is empty, cannot send trigger to radvd" err $fn - return 3 - fi - fi - - - # Do action - case $action in - 'SIGHUP') - kill -HUP $pid - ;; - 'reload'|'restart'|'stop'|'start') - if ! /sbin/chkconfig --list radvd >/dev/null 2>&1; then - if [ "$reason" = "down" ]; then - # be quiet because triggering may have been disabled - true - else - net_log $"radvd not (properly) installed, triggering failed" err $fn - fi - return 3 - else - /sbin/service radvd $action >/dev/null 2>&1 - fi - ;; - *) - # Normally not reached, "action" is set above to proper value - ;; - esac - - return 0 + local fn="ipv6_trigger_radvd" + + local reason=$1 + local mechanism=$2 + local pidfile=$3 + + if [ -z "$reason" ]; then + net_log $"No reason given for sending trigger to radvd" err $fn + return 1 + fi + + if [ "$reason" != "up" -a "$reason" != "down" ]; then + net_log $"Unsupported reason '$reason' for sending trigger to radvd" err $fn + return 1 + fi + + if [ -z "$mechanism" ]; then + # Take default + local mechanism="SIGHUP" + fi + + if [ -z "$pidfile" ]; then + local pidfile="/var/run/radvd/radvd.pid" + fi + + # Print message and select action + case $mechanism in + 'startstop') + case $reason in + up) + local action="start" + ;; + down) + local action="stop" + ;; + esac + ;; + 'reload'|'restart'|'SIGHUP') + local action="$mechanism" + ;; + *) + net_log $"Unsupported mechanism '$mechanism' for sending trigger to radvd" err $fn + return 3 + ;; + esac + + # PID file needed? + if [ "$action" = "SIGHUP" ]; then + if ! [ -f "$pidfile" ]; then + if [ "$reason" = "down" ]; then + # be quiet because triggering may have been disabled + true + else + net_log $"Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd" err $fn + fi + return 3 + fi + + # Get PID + local pid="$(cat $pidfile)" + if [ -z "$pid" ]; then + # pidfile empty - strange + net_log $"Pidfile '$pidfile' is empty, cannot send trigger to radvd" err $fn + return 3 + fi + fi + + + # Do action + case $action in + 'SIGHUP') + kill -HUP $pid + ;; + 'reload'|'restart'|'stop'|'start') + if ! /sbin/chkconfig --list radvd >/dev/null 2>&1; then + if [ "$reason" = "down" ]; then + # be quiet because triggering may have been disabled + true + else + net_log $"radvd not (properly) installed, triggering failed" err $fn + fi + return 3 + else + /sbin/service radvd $action >/dev/null 2>&1 + fi + ;; + *) + # Normally not reached, "action" is set above to proper value + ;; + esac + + return 0 } #https://www.vaspects.com/2013/12/11/services-dont-bind-to-ipv6-address/ ipv6_wait_tentative() { - local fn="ipv6_wait_tentative" - local device=$1 - local countdown=30 - - if [ -z "$device" ]; then - net_log $"Missing parameter 'device' (arg 1)" err $fn - return 1 + local fn="ipv6_wait_tentative" + local device=$1 + local countdown=30 + local ip_output="" + + if [ -z "$device" ]; then + net_log $"Missing parameter 'device' (arg 1)" err $fn + return 1 + fi + + [ "$device" = lo ] && return 0 + + while [ ${countdown} -gt 0 ]; do + ip_output="$(ip -6 addr show dev ${device} scope global tentative)" + + if [ -z "$ip_output" ]; then + return 0; + elif echo "$ip_output" | grep "dadfailed" > /dev/null; then + net_log $"Duplicate Address Detection: Duplicate addresses detected" err $fn + net_log $"Duplicate Address Detection: Please, fix your network configuration" err $fn + return 1 fi - [ "$device" = lo ] && return 0 + net_log $"Waiting for interface ${device} IPv6 address(es) to leave the 'tentative' state" info $fn + sleep 1 + countdown=$(($countdown - 1)) + done - while [ ${countdown} -gt 0 -a -n "$(ip -6 addr show dev ${device} scope global tentative)" ]; do - net_log $"Waiting for interface ${device} IPv6 address(es) to leave the \"tentative\" state" info $fn - countdown=$(($countdown - 1)) - sleep 1 - done - return 0 + ip_output="$(ip -6 addr show dev ${device} scope global tentative)" + + if [ -n "$ip_output" ]; then + net_log $"Some IPv6 address(es) of ${device} remain still in 'tentative' state" warning $fn + net_log $"Run 'ip -6 addr show dev ${device} scope global tentative' to see more" warning $fn + fi + + return 0 } -- cgit v1.2.1