From 79b2b232cb34f7df3e440968240975e44c4b8fc7 Mon Sep 17 00:00:00 2001 From: Bill Nottingham Date: Thu, 3 Dec 2009 14:29:21 -0500 Subject: Move to new upstart job location and file extension. --- init/console.conf | 16 ++++++++++++++++ init/control-alt-delete.conf | 8 ++++++++ init/plymouth-shutdown.conf | 24 ++++++++++++++++++++++++ init/prefdm.conf | 12 ++++++++++++ init/quit-plymouth.conf | 15 +++++++++++++++ init/rc0.conf | 25 +++++++++++++++++++++++++ init/rc1.conf | 29 +++++++++++++++++++++++++++++ init/rc2.conf | 20 ++++++++++++++++++++ init/rc3.conf | 20 ++++++++++++++++++++ init/rc4.conf | 20 ++++++++++++++++++++ init/rc5.conf | 20 ++++++++++++++++++++ init/rc6.conf | 23 +++++++++++++++++++++++ init/rcS-sulogin.conf | 22 ++++++++++++++++++++++ init/rcS.conf | 31 +++++++++++++++++++++++++++++++ init/serial.conf | 42 ++++++++++++++++++++++++++++++++++++++++++ init/tty1.conf | 15 +++++++++++++++ init/tty2.conf | 16 ++++++++++++++++ init/tty3.conf | 16 ++++++++++++++++ init/tty4.conf | 16 ++++++++++++++++ init/tty5.conf | 16 ++++++++++++++++ init/tty6.conf | 16 ++++++++++++++++ 21 files changed, 422 insertions(+) create mode 100644 init/console.conf create mode 100644 init/control-alt-delete.conf create mode 100644 init/plymouth-shutdown.conf create mode 100644 init/prefdm.conf create mode 100644 init/quit-plymouth.conf create mode 100644 init/rc0.conf create mode 100644 init/rc1.conf create mode 100644 init/rc2.conf create mode 100644 init/rc3.conf create mode 100644 init/rc4.conf create mode 100644 init/rc5.conf create mode 100644 init/rc6.conf create mode 100644 init/rcS-sulogin.conf create mode 100644 init/rcS.conf create mode 100644 init/serial.conf create mode 100644 init/tty1.conf create mode 100644 init/tty2.conf create mode 100644 init/tty3.conf create mode 100644 init/tty4.conf create mode 100644 init/tty5.conf create mode 100644 init/tty6.conf (limited to 'init') diff --git a/init/console.conf b/init/console.conf new file mode 100644 index 00000000..732a3fa9 --- /dev/null +++ b/init/console.conf @@ -0,0 +1,16 @@ +# console - getty +# +# This service maintains a getty on console from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty console diff --git a/init/control-alt-delete.conf b/init/control-alt-delete.conf new file mode 100644 index 00000000..35cb1305 --- /dev/null +++ b/init/control-alt-delete.conf @@ -0,0 +1,8 @@ +# control-alt-delete - emergency keypress handling +# +# This task is run whenever the Control-Alt-Delete key combination is +# pressed. Usually used to shut down the machine. + +start on control-alt-delete + +exec /sbin/shutdown -r now "Control-Alt-Delete pressed" diff --git a/init/plymouth-shutdown.conf b/init/plymouth-shutdown.conf new file mode 100644 index 00000000..d76dbd3f --- /dev/null +++ b/init/plymouth-shutdown.conf @@ -0,0 +1,24 @@ +# plymouth-shutdown - put up shutdown splash +# +# This service triggers plymouth to put up a splash +# when leaving runlevel 5. + +start on stopped prefdm + +console output +script + set $(runlevel || true) + if [ "$2" != "0" ] && [ "$2" != "6" ]; then + exit 0 + fi + + /sbin/plymouthd --mode=shutdown || exit 1 + /bin/plymouth --sysinit + /bin/plymouth --show-splash + if [ "$2" = "0" ]; then + /bin/plymouth message --text="Shutting down..." + elif [ "$2" = "6" ]; then + /bin/plymouth message --text="Restarting..." + fi +end script + diff --git a/init/prefdm.conf b/init/prefdm.conf new file mode 100644 index 00000000..7098bd76 --- /dev/null +++ b/init/prefdm.conf @@ -0,0 +1,12 @@ +# prefdm - preferred display manager +# +# Starts gdm/xdm/etc by preference + +start on stopped rc5 + +stop on runlevel [!5] + +console output +respawn +respawn limit 10 120 +exec /etc/X11/prefdm -nodaemon diff --git a/init/quit-plymouth.conf b/init/quit-plymouth.conf new file mode 100644 index 00000000..13ac3880 --- /dev/null +++ b/init/quit-plymouth.conf @@ -0,0 +1,15 @@ +# quit-plymouth - script to stop boot splash +# +# This service triggers plymouth to quit when we reach the +# end of the boot cycle. We start on 'stopping rcX' to make sure +# this completes before the getty starts. +# prefdm handles quit differently, though. + +start on runlevel S +start on stopping rc2 +start on stopping rc3 +start on stopping rc4 + +script + /usr/bin/plymouth quit || : +end script diff --git a/init/rc0.conf b/init/rc0.conf new file mode 100644 index 00000000..11ce5a51 --- /dev/null +++ b/init/rc0.conf @@ -0,0 +1,25 @@ +# rc0 - runlevel 0 compatibility +# +# This task runs the old sysv-rc runlevel 0 ("halt/poweroff") scripts with +# the decision as to whether to halt or power off the system left up to the +# script (and thus /etc/default/poweroff). + +start on runlevel 0 + +stop on runlevel [!0] + +console output +script + set $(runlevel || true) + if [ "$2" != "0" ] && [ "$2" != "6" ]; then + set $(runlevel --set 0 || true) + fi + + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 0 +end script diff --git a/init/rc1.conf b/init/rc1.conf new file mode 100644 index 00000000..38397b31 --- /dev/null +++ b/init/rc1.conf @@ -0,0 +1,29 @@ +# rc1 - runlevel 1 compatibility +# +# This task runs the old sysv-rc runlevel 1 ("single-user") scripts. +# /etc/rc.d/rc 1 will run the /etc/rc.d/rc1.d scripts. +# telinit S will run whichever task has "start on runlevel S", +# normally /etc/event.d/rcS-sulogin + +start on runlevel 1 + +stop on runlevel [!1] + +console output +script + set $(runlevel --set 1 || true) + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 1 +end script +post-stop script + clear + TEXTDOMAIN=initscripts + . /etc/profile.d/lang.sh 2>/dev/null + echo $"Telling INIT to go to single user mode." + exec telinit S +end script diff --git a/init/rc2.conf b/init/rc2.conf new file mode 100644 index 00000000..6cc4d884 --- /dev/null +++ b/init/rc2.conf @@ -0,0 +1,20 @@ +# rc2 - runlevel 2 compatibility +# +# This task runs the old sysv-rc runlevel 2 ("multi-user") scripts. It +# is usually started by the telinit compatibility wrapper. + +start on runlevel 2 + +stop on runlevel [!2] + +console output +script + set $(runlevel --set 2 || true) + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 2 +end script diff --git a/init/rc3.conf b/init/rc3.conf new file mode 100644 index 00000000..47a4a639 --- /dev/null +++ b/init/rc3.conf @@ -0,0 +1,20 @@ +# rc3 - runlevel 3 compatibility +# +# This task runs the old sysv-rc runlevel 3 (user defined) scripts. It +# is usually started by the telinit compatibility wrapper. + +start on runlevel 3 + +stop on runlevel [!3] + +console output +script + set $(runlevel --set 3 || true) + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 3 +end script diff --git a/init/rc4.conf b/init/rc4.conf new file mode 100644 index 00000000..8e079f0e --- /dev/null +++ b/init/rc4.conf @@ -0,0 +1,20 @@ +# rc4 - runlevel 4 compatibility +# +# This task runs the old sysv-rc runlevel 4 (user defined) scripts. It +# is usually started by the telinit compatibility wrapper. + +start on runlevel 4 + +stop on runlevel [!4] + +console output +script + set $(runlevel --set 4 || true) + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 4 +end script diff --git a/init/rc5.conf b/init/rc5.conf new file mode 100644 index 00000000..0ef6a400 --- /dev/null +++ b/init/rc5.conf @@ -0,0 +1,20 @@ +# rc5 - runlevel 5 compatibility +# +# This task runs the old sysv-rc runlevel 5 (user defined) scripts. It +# is usually started by the telinit compatibility wrapper. + +start on runlevel 5 + +stop on runlevel [!5] + +console output +script + set $(runlevel --set 5 || true) + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 5 +end script diff --git a/init/rc6.conf b/init/rc6.conf new file mode 100644 index 00000000..f9df8b4a --- /dev/null +++ b/init/rc6.conf @@ -0,0 +1,23 @@ +# rc6 - runlevel 6 compatibility +# +# This task runs the old sysv-rc runlevel 6 ("reboot") scripts. + +start on runlevel 6 + +stop on runlevel [!6] + +console output +script + set $(runlevel || true) + if [ "$2" != "0" ] && [ "$2" != "6" ]; then + set $(runlevel --set 6 || true) + fi + + if [ "$1" != "unknown" ]; then + PREVLEVEL=$1 + RUNLEVEL=$2 + export PREVLEVEL RUNLEVEL + fi + + exec /etc/rc.d/rc 6 +end script diff --git a/init/rcS-sulogin.conf b/init/rcS-sulogin.conf new file mode 100644 index 00000000..d3aa20d1 --- /dev/null +++ b/init/rcS-sulogin.conf @@ -0,0 +1,22 @@ +# rcS-sulogin - "single-user" runlevel compatibility +# +# This task runs /bin/bash during "single-user" mode, +# then continues to the default runlevel. + +start on runlevel S + +stop on runlevel + +console owner +script + runlevel --set S >/dev/null || true + plymouth --hide-splash || true + exec /bin/bash +end script +post-stop script + if [ "$1" = "S" ]; then + runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab) + [ -z "$runlevel" ] && runlevel="3" + exec telinit $runlevel + fi +end script diff --git a/init/rcS.conf b/init/rcS.conf new file mode 100644 index 00000000..1c0a54be --- /dev/null +++ b/init/rcS.conf @@ -0,0 +1,31 @@ +# rcS - runlevel compatibility +# +# This task runs the old sysv-rc startup scripts. + +start on startup + +stop on runlevel + +# Note: there can be no previous runlevel here, if we have one it's bad +# information (we enter rc1 not rcS for maintenance). Run /etc/rc.d/rc +# without information so that it defaults to previous=N runlevel=S. +console output +script + runlevel --set S >/dev/null || true + + /etc/rc.d/rc.sysinit + runlevel --reboot || true +end script +post-stop script + if [ "$UPSTART_EVENT" = "startup" ]; then + runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab) + [ -z "$runlevel" ] && runlevel="3" + for t in $(cat /proc/cmdline); do + case $t in + -s|single|S|s) runlevel="S" ;; + [1-9]) runlevel="$t" ;; + esac + done + exec telinit $runlevel + fi +end script diff --git a/init/serial.conf b/init/serial.conf new file mode 100644 index 00000000..660e93bd --- /dev/null +++ b/init/serial.conf @@ -0,0 +1,42 @@ +# Automatically start a configured serial console +# +# How this works: +# +# On boot, a udev helper examines /dev/console. If a serial console is the +# primary console (last console on the commandline in grub), the event +# 'fedora.serial-console-available ' is emitted, which +# triggers this script. It waits for the runlevel to finish, ensures +# the proper port is in /etc/securetty, and starts the getty. +# +# If your serial console is not the primary console, or you want a getty +# on serial even if it's not the console, create your own event by copying +# /etc/event.d/tty[2-6], and changing the getty line in that file. + +start on fedora.serial-console-available * +stop on runlevel [016] + +instance +pre-start script + while /bin/true ; do + LANG=C /sbin/initctl status rcS | grep -wq "rcS (stop) waiting" && break + sleep 1 + done + while /bin/true ; do + runlevel=$(/sbin/runlevel | /bin/awk '{ print $2 }') + case "$runlevel" in + 2|3|4|5) + LANG=C /sbin/initctl status rc$runlevel | grep -wq "rc$runlevel (stop) waiting" && break + ;; + *) + ;; + esac + sleep 1 + done + /sbin/securetty $1 +end script +exec /sbin/agetty /dev/$1 $2 vt100-nav +post-stop script + if [ "$UPSTART_EVENT" != "${UPSTART_EVENT##fedora.serial-console-available}" ]; then + initctl emit --no-wait fedora.serial-console-available $1 $2 + fi +end script diff --git a/init/tty1.conf b/init/tty1.conf new file mode 100644 index 00000000..7747d660 --- /dev/null +++ b/init/tty1.conf @@ -0,0 +1,15 @@ +# tty1 - getty +# +# This service maintains a getty on tty1 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty1 diff --git a/init/tty2.conf b/init/tty2.conf new file mode 100644 index 00000000..ec5f94cd --- /dev/null +++ b/init/tty2.conf @@ -0,0 +1,16 @@ +# tty2 - getty +# +# This service maintains a getty on tty2 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty2 diff --git a/init/tty3.conf b/init/tty3.conf new file mode 100644 index 00000000..ed95fdcf --- /dev/null +++ b/init/tty3.conf @@ -0,0 +1,16 @@ +# tty3 - getty +# +# This service maintains a getty on tty3 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty3 diff --git a/init/tty4.conf b/init/tty4.conf new file mode 100644 index 00000000..76b6d717 --- /dev/null +++ b/init/tty4.conf @@ -0,0 +1,16 @@ +# tty4 - getty +# +# This service maintains a getty on tty4 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty4 diff --git a/init/tty5.conf b/init/tty5.conf new file mode 100644 index 00000000..9e9d8137 --- /dev/null +++ b/init/tty5.conf @@ -0,0 +1,16 @@ +# tty5 - getty +# +# This service maintains a getty on tty5 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty5 diff --git a/init/tty6.conf b/init/tty6.conf new file mode 100644 index 00000000..7eb42c01 --- /dev/null +++ b/init/tty6.conf @@ -0,0 +1,16 @@ +# tty6 - getty +# +# This service maintains a getty on tty6 from the point the system is +# started until it is shut down again. + +start on stopped rc2 +start on stopped rc3 +start on stopped rc4 +start on started prefdm + +stop on runlevel 0 +stop on runlevel 1 +stop on runlevel 6 + +respawn +exec /sbin/mingetty tty6 -- cgit v1.2.1