From 152c8f3ab577dbbce1b17ee1db1996d00d789295 Mon Sep 17 00:00:00 2001
From: Karsten Hopp <karsten@redhat.com>
Date: Mon, 20 Aug 2001 13:26:36 +0000
Subject: added ifup file for S/390 ESCON interfaces. No need to rebuild on
 non-S390 right now

---
 ChangeLog                            |  5 ++++
 initscripts.spec                     |  1 +
 sysconfig/network-scripts/ifup-escon | 54 ++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 sysconfig/network-scripts/ifup-escon

diff --git a/ChangeLog b/ChangeLog
index 25247cf4..d169277c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2001-08-20 Karsten Hopp <karsten@redhat.de>
+
+	* initscripts.spec, ifup-escon:
+	- add configuration of escon interface for S/390
+
 2001-08-20  Bill Nottingham  <notting@redhat.com>
 
 	* ChangeLog, initscripts.spec: 6.21-1
diff --git a/initscripts.spec b/initscripts.spec
index 7fbad903..2d953839 100644
--- a/initscripts.spec
+++ b/initscripts.spec
@@ -189,6 +189,7 @@ rm -rf $RPM_BUILD_ROOT
 /etc/sysconfig/network-scripts/ifdown-isdn
 %ifarch s390 s390x
 %config /etc/sysconfig/network-scripts/ifup-ctc
+%config /etc/sysconfig/network-scripts/ifup-escon
 %config /etc/sysconfig/network-scripts/ifup-iucv
 %endif
 %config /etc/X11/prefdm
diff --git a/sysconfig/network-scripts/ifup-escon b/sysconfig/network-scripts/ifup-escon
new file mode 100644
index 00000000..f8cfc101
--- /dev/null
+++ b/sysconfig/network-scripts/ifup-escon
@@ -0,0 +1,54 @@
+#!/bin/bash
+#
+# /etc/sysconfig/network-scripts/ifup-escon
+#
+# the escon network interface is a point-to-point interface on S/390 machines
+# which uses the ctc module.
+#
+# To get the ctc module to load automatically at boot, you will need to
+# add the following line to /etc/modules.conf:
+#
+# alias escon0 ctc
+#
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+
+cd /etc/sysconfig/network-scripts
+. network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+if [ "$2" = "boot" -a "${ONBOOT}" = "no" ]
+then
+	exit
+fi
+[ -n "${MTU}" ] && opts="${opts} mtu ${MTU}"
+
+ifconfig ${DEVICE} ${IPADDR} ${opts} pointopoint ${REMIP}
+
+# Wait for the device to come up - the chandev'ified ctc driver can take
+# quite a while...
+timeout=0
+while ! ping -w 30 -c ${REMIP} &>/dev/null; do
+	timeout=$(($timeout + 1))
+	if [ $timeout = 20 ]; then
+		echo $"ERROR: ${DEVICE} did not come up!"
+		break
+	fi
+done
+
+if [ "${NETWORK}" != "" ] ; then
+	route add -net ${NETWORK} netmask ${NETMASK} ${DEVICE}
+fi
+
+. /etc/sysconfig/network
+
+if [ "${GATEWAY}" != "" ]; then
+	if [ "${GATEWAYDEV}" = "" -o "${GATEWAYDEV}" = "${DEVICE}" ]; then
+		# set up default gateway
+		route add default gw ${GATEWAY}
+	fi
+fi
+
+/etc/sysconfig/network-scripts/ifup-post $1
-- 
cgit v1.2.1