aboutsummaryrefslogtreecommitdiffstats
path: root/sysconfig/network-scripts
Commit message (Expand)AuthorAgeFilesLines
* ifup-eth: use /run/initramfs rather then /dev/.run/initramfsHarald Hoyer2011-03-301-1/+1
* Convert ipv6_log users to net_log.Bill Nottingham2011-03-251-204/+51
* Use net_log where appropriate.Bill Nottingham2011-03-2510-45/+45
* Switch the default logging value to error.Bill Nottingham2011-03-251-2/+2
* Make net_log()'s output similar to that of the ipv6 logger.Bill Nottingham2011-03-251-1/+16
* Add a net_log() function. (#507515, #689525)Bill Nottingham2011-03-251-0/+23
* Support ipv6 routing rules by merging IPv4/IPv6, and route/rule code. (#68087...Bill Nottingham2011-03-113-26/+30
* Fix check for unmanaged devices so it does the right thing with devices NM do...Bill Nottingham2011-03-101-1/+1
* network-scripts/ifup-eth: fix cec3312 and close bracesHarald Hoyer2011-03-101-1/+1
* network-scripts/ifup-eth: also check /dev/.run/initramfsHarald Hoyer2011-03-101-1/+1
* Add GVRP support (#597598, <tomek@jot23.org>)Bill Nottingham2011-02-281-1/+5
* Drop some unnecessary command invocations.Ville Skyttä2011-02-287-20/+19
* remove network device naming requirement from VLAN devicesMatt Domsch2011-02-251-2/+2
* Handle 'MASTER' being quoted. (#651450, <gfidente@redhat.com>)Bill Nottingham2011-01-122-2/+2
* Catch these uses of sysctl too.Bill Nottingham2011-01-041-6/+8
* Frob device when calling sysctl, in case of vlans. (#665601, #667211, <ossman...Bill Nottingham2011-01-045-11/+12
* Fix routing regression (#660363)Bill Nottingham2010-12-061-1/+1
* Support multiple IP addreses via IPADDRn, PREFIXn (or NETMASKn) (#633984) Ada...Bill Nottingham2010-11-302-32/+57
* Allow 0 as a vlan tag. (#624704, #635360)Bill Nottingham2010-11-291-1/+1
* Don't accidentally cause sit module to be loaded on shutdown. (#654098, <ejsh...Bill Nottingham2010-11-161-1/+3
* Add infiniband mapping (#648524, <monis@voltaire.com>)Bill Nottingham2010-11-011-0/+3
* Fix ifdown calling nmcli for NM-managed devices; others are handled by ifdown...Jiří Klimeš2010-11-012-1/+6
* Check for dhclient configuration in /etc/dhcp as well (#607764, #607766)Bill Nottingham2010-06-241-1/+3
* Cleanup.Bill Nottingham2010-06-241-2/+2
* Handle quoted SUBCHANNELS (#607481)Bill Nottingham2010-06-241-2/+2
* Remove 'BOOTP' config option. It was considered 'old' in 1997. (Seriously.)Bill Nottingham2010-06-042-10/+0
* Don't use a full path when killing racoon, so it works in MLS policy (#567295)Bill Nottingham2010-06-042-2/+2
* Check NM_CONTROLLED before deciding to use NM for a connection. (#599707, pro...Bill Nottingham2010-06-041-1/+1
* Behave sanely if we're not passed a device at all. (#589521, #592108)Bill Nottingham2010-05-131-0/+2
* Get rid of a silly error message for loopback devices.Bill Nottingham2010-05-131-1/+1
* Clean up some leftover VLAN code; clarify documentation.Bill Nottingham2010-05-131-2/+0
* use ip command for vlan instead of vconfigPetr Lautrbach2010-05-132-24/+8
* Update for new nmcli syntax.initscripts-9.12-1Bill Nottingham2010-05-052-3/+3
* Run dhclient -6 similar to dhclient -4. (#585047)Bill Nottingham2010-04-231-1/+1
* Don't run on odd interfaces. (#584530)Bill Nottingham2010-04-211-0/+2
* Redirect error messages to /dev/null to catch if nmcli is not installed. (#57...Bill Nottingham2010-03-051-2/+2
* Pull device from NetworkManager, if possible.Bill Nottingham2010-03-041-3/+8
* Only use UUID to bring connections up/down; ensure we have a UUID by asking N...Bill Nottingham2010-03-012-9/+9
* Quote 'name' when passing to get_config_by_name.Bill Nottingham2010-03-011-1/+1
* Quote need_config; needed when identifying configuration by NM's 'name'.Bill Nottingham2010-03-013-3/+3
* Fix is_nm_activeBill Nottingham2010-03-011-1/+1
* When bringing devices down, disconnect the device, don't down the connection.Bill Nottingham2010-03-012-6/+7
* Remove quotes from uuid.Bill Nottingham2010-03-011-1/+1
* Use NM if it's running and we have a configuration for the device.Bill Nottingham2010-03-013-0/+22
* Add a function that determines the status of NetworkManager; use it.Bill Nottingham2010-03-011-0/+6
* Add get_config_by_name, use it.Bill Nottingham2010-03-011-0/+12
* Add get_config_by_device, adjust caller.Bill Nottingham2010-03-011-3/+9
* Make sure we default to 'ok' if link checking fails.Bill Nottingham2010-02-151-1/+1
* Don't use ethtool to check for device w/bonding driver; just check that the p...Bill Nottingham2010-02-151-1/+1
* Don't use ethtool to check link ; operate on the carrier sysfs attribute.Bill Nottingham2010-02-151-20/+1