aboutsummaryrefslogtreecommitdiffstats
path: root/rc.d
diff options
context:
space:
mode:
Diffstat (limited to 'rc.d')
-rw-r--r--rc.d/init.d/functions338
-rwxr-xr-xrc.d/init.d/halt178
-rwxr-xr-xrc.d/init.d/killall2
-rw-r--r--rc.d/init.d/netconsole23
-rwxr-xr-xrc.d/init.d/netfs60
-rwxr-xr-xrc.d/init.d/network90
-rwxr-xr-xrc.d/init.d/single18
-rwxr-xr-xrc.d/rc66
-rwxr-xr-xrc.d/rc.local12
-rwxr-xr-xrc.d/rc.sysinit709
10 files changed, 1197 insertions, 299 deletions
diff --git a/rc.d/init.d/functions b/rc.d/init.d/functions
index 3f2cbc50..b1ce5a72 100644
--- a/rc.d/init.d/functions
+++ b/rc.d/init.d/functions
@@ -5,6 +5,13 @@
#
TEXTDOMAIN=initscripts
+TEXTDOMAINDIR=/etc/locale
+LOCPATH=/etc/locale
+export TEXTDOMAINDIR LOCPATH
+
+TMP=/tmp
+TMPDIR=/tmp
+export TMP TMPDIR
# Make sure umask is sane
umask 022
@@ -50,22 +57,35 @@ systemctl_redirect () {
action "$s" /bin/systemctl $options $command "$prog.service"
}
-# Get a sane screen width
+
+[ -z "${CONSOLETYPE:-}" ] && CONSOLETYPE="$(/sbin/consoletype <&2)"
+# Get a sane screen width, and default to 80 when exact info not available
+[ -z "${COLUMNS:-}" ] && COLUMNS=`stty -a 2>/dev/null | sed -n 's/.*columns \([0-9]*\);.*/\1/p'`
[ -z "${COLUMNS:-}" ] && COLUMNS=80
-if [ -z "${CONSOLETYPE:-}" ]; then
- if [ -r "/dev/stderr" ]; then
- CONSOLETYPE="$(/sbin/consoletype < /dev/stderr)"
- else
- CONSOLETYPE="$(/sbin/consoletype)"
- fi
-fi
+function load_i18_settings() {
+ if [ -f /etc/sysconfig/i18n -a -z "$NOLOCALE" ]; then
+ . /etc/sysconfig/i18n
+ if [ "$CONSOLETYPE" != "pty" ]; then
+ [ "$CONSOLE_NOT_LOCALIZED" = "yes" ] && GP_LANG=C
+ [ "$CONSOLE_NOT_LOCALIZED" = "yes" ] && GP_LANGUAGE=C
+ fi
+ if [ -z "$GP_LANG" ]; then
+ [ -n "$LC_CTYPE" ] && GP_LANG=$LC_CTYPE || GP_LANG=$LC_MESSAGES
+ fi
+ if [ -z "$GP_LANGUAGE" ]; then
+ [ -n "$LANGUAGE" ] && GP_LANGUAGE=$LANGUAGE || GP_LANGUAGE=$GP_LANG
+ fi
+ fi
+}
-if [ -z "${NOLOCALE:-}" ] && [ -z "${LANGSH_SOURCED:-}" ] && [ -f /etc/sysconfig/i18n ] ; then
- . /etc/profile.d/lang.sh 2>/dev/null
- # avoid propagating LANGSH_SOURCED any further
- unset LANGSH_SOURCED
-fi
+function reset_i18_settings() {
+ local CONSOLE_NOT_LOCALIZED=yes
+ LC_ALL=C
+ load_i18_settings
+}
+
+load_i18_settings
# Read in our configuration
if [ -z "${BOOTUP:-}" ]; then
@@ -73,9 +93,9 @@ if [ -z "${BOOTUP:-}" ]; then
. /etc/sysconfig/init
else
# This all seem confusing? Look in /etc/sysconfig/init,
- # or in /usr/doc/initscripts-*/sysconfig.txt
+ # or in /usr/share/doc/initscripts-*/sysconfig.txt
BOOTUP=color
- RES_COL=60
+ RES_COL=$((COLUMNS - 15))
MOVE_TO_COL="echo -en \\033[${RES_COL}G"
SETCOLOR_SUCCESS="echo -en \\033[1;32m"
SETCOLOR_FAILURE="echo -en \\033[1;31m"
@@ -93,6 +113,60 @@ if [ -z "${BOOTUP:-}" ]; then
fi
fi
+gprintf() {
+ if [ -x /bin/gettext -a -n "$1" ]; then
+ if [ -n "$GP_LANG" ]; then
+ local TEXT=`LC_ALL=$GP_LANG LANGUAGE=$GP_LANGUAGE gettext -e --domain=$TEXTDOMAIN -- "$1"`
+ else
+ local TEXT=`gettext -e --domain=$TEXTDOMAIN -- "$1"`
+ fi
+ else
+ local TEXT=$1
+ fi
+ [ "${1#*\\n}" ] || TEXT="$TEXT\n"
+
+ shift
+ printf -- "$TEXT" "$@"
+}
+
+# Frontend to gprintf (support up to 4 %s in format string)
+# returns the message transleted in GPRINTF_MSG and
+# the resting parms in GPRINTF_REST
+# This simplifies a lot the call of functions like action,
+# now with i18n support
+gprintf_msg_rest() {
+case "$1" in
+ *%s*%s*%s*%s*)
+ GPRINTF_MSG=$(gprintf "$1" "$2" "$3" "$4" "$5")
+ shift 5;;
+ *%s*%s*%s*)
+ GPRINTF_MSG=$(gprintf "$1" "$2" "$3" "$4")
+ shift 4;;
+ *%s*%s*)
+ GPRINTF_MSG=$(gprintf "$1" "$2" "$3")
+ shift 3;;
+ *%s*)
+ GPRINTF_MSG=$(gprintf "$1" "$2")
+ shift 2;;
+ *)
+ GPRINTF_MSG=$(gprintf "$1")
+ shift;;
+esac
+GPRINTF_REST="$@"
+}
+
+# Check if $pid (could be plural) are running with
+# the same root as this script
+inmyroot() {
+ local i r
+
+ for i in $* ; do
+ [ "/proc/$i/root" -ef "/proc/$$/root" ] && r="$r $i"
+ done
+ echo "$r"
+}
+
+
# Interpret escape sequences in an fstab entry
fstab_decode_str() {
fstab-decode echo "$1"
@@ -159,23 +233,23 @@ __umount_loopback_loop() {
local remaining devremaining sig=
local retry=3
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
+ remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $2}' /proc/mounts)
+ devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $1}' /proc/mounts)
while [ -n "$remaining" -a "$retry" -gt 0 ]; do
if [ "$retry" -eq 3 ]; then
- action $"Unmounting loopback filesystems: " \
+ action "Unmounting loopback filesystems: " \
fstab-decode umount $remaining
else
- action $"Unmounting loopback filesystems (retry):" \
+ action "Unmounting loopback filesystems (retry):" \
fstab-decode umount $remaining
fi
for dev in $devremaining ; do
losetup $dev > /dev/null 2>&1 && \
- action $"Detaching loopback device $dev: " \
+ action "Detaching loopback device %s: " $dev \
losetup -d $dev
done
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
+ remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $2}' /proc/mounts)
+ devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" && $2 !~ /^\/live\// {print $1}' /proc/mounts)
[ -z "$remaining" ] && break
fstab-decode /sbin/fuser -k -m $sig $remaining >/dev/null
sleep 3
@@ -229,7 +303,7 @@ daemon() {
nicelevel=0
while [ "$1" != "${1##[-+]}" ]; do
case $1 in
- '') echo $"$0: Usage: daemon [+/-nicelevel] {program}"
+ '') gprintf "%s: Usage: daemon [+/-nicelevel] {program}\n" $0
return 1;;
--check)
base=$2
@@ -265,7 +339,7 @@ daemon() {
nice="nice -n $1"
shift
;;
- *) echo $"$0: Usage: daemon [+/-nicelevel] {program}"
+ *) gprintf "%s: Usage: daemon [+/-nicelevel] {program}\n" $0
return 1;;
esac
done
@@ -304,10 +378,11 @@ daemon() {
if [ -z "$user" ]; then
$cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
else
- $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
+ $cgroup $nice su -s /bin/bash - $user -c "$corelimit >/dev/null 2>&1 ; $*"
fi
-
- [ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
+ rc=$?
+ [ $rc = 0 ] && success "%s startup" $base || failure "%s startup" $base
+ return $rc
}
# A function to stop a program.
@@ -317,7 +392,7 @@ killproc() {
RC=0; delay=3
# Test syntax.
if [ "$#" -eq 0 ]; then
- echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
+ gprintf "Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
return 1
fi
if [ "$1" = "-p" ]; then
@@ -347,6 +422,9 @@ killproc() {
fi
fi
+ # Avoid killing processes not running in the same root
+ [ -n "$pid" ] && pid="`inmyroot $pid`"
+
# Kill it.
if [ -n "$pid" ] ; then
[ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
@@ -364,14 +442,14 @@ killproc() {
fi
checkpid $pid
RC=$?
- [ "$RC" -eq 0 ] && failure $"$base shutdown" || success $"$base shutdown"
+ [ "$RC" -eq 0 ] && failure "%s shutdown" $base || success "%s shutdown" $base
RC=$((! $RC))
# use specified level only
else
if checkpid $pid; then
kill $killlevel $pid >/dev/null 2>&1
RC=$?
- [ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
+ [ "$RC" -eq 0 ] && success "%s %s" $base $killlevel || failure "%s %s" $base $killlevel
elif [ -n "${LSB:-}" ]; then
RC=7 # Program is not running
fi
@@ -380,7 +458,7 @@ killproc() {
if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
RC=7 # Program is not running
else
- failure $"$base shutdown"
+ failure "%s shutdown" $base
RC=0
fi
fi
@@ -397,8 +475,8 @@ pidfileofproc() {
local pid
# Test syntax.
- if [ "$#" = 0 ] ; then
- echo $"Usage: pidfileofproc {program}"
+ if [ "$#" -eq 0 ] ; then
+ gprintf "Usage: pidfileofproc {program}\n"
return 1
fi
@@ -413,7 +491,7 @@ pidofproc() {
# Test syntax.
if [ "$#" = 0 ]; then
- echo $"Usage: pidofproc [-p pidfile] {program}"
+ gprintf "Usage: pidofproc [-p pidfile] {program}\n"
return 1
fi
if [ "$1" = "-p" ]; then
@@ -439,7 +517,7 @@ status() {
# Test syntax.
if [ "$#" = 0 ] ; then
- echo $"Usage: status [-p pidfile] {program}"
+ gprintf "Usage: status [-p pidfile] {program}\n"
return 1
fi
if [ "$1" = "-p" ]; then
@@ -464,21 +542,21 @@ status() {
pid="$(__pids_pidof "$1")"
fi
if [ -n "$pid" ]; then
- echo $"${base} (pid $pid) is running..."
+ gprintf "%s (pid %s) is running...\n" ${base} "$pid"
return 0
fi
case "$RC" in
0)
- echo $"${base} (pid $pid) is running..."
+ gprintf "%s (pid %s) is running...\n" ${base} "$pid"
return 0
;;
1)
- echo $"${base} dead but pid file exists"
+ gprintf "%s dead but pid file exists\n" ${base}
return 1
;;
4)
- echo $"${base} status unknown due to insufficient privileges."
+ gprintf "%s status unknown due to insufficient privileges." ${base}
return 4
;;
esac
@@ -487,10 +565,10 @@ status() {
fi
# See if /var/lock/subsys/${lock_file} exists
if [ -f /var/lock/subsys/${lock_file} ]; then
- echo $"${base} dead but subsys locked"
+ gprintf "%s dead but subsys locked\n" ${base}
return 2
fi
- echo $"${base} is stopped"
+ gprintf "%s is stopped\n" ${base}
return 3
}
@@ -498,7 +576,7 @@ echo_success() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
- echo -n $" OK "
+ gprintf " OK "
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
@@ -509,7 +587,7 @@ echo_failure() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
- echo -n $"FAILED"
+ gprintf "FAILED"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
@@ -520,7 +598,7 @@ echo_passed() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
- echo -n $"PASSED"
+ gprintf "PASSED"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
@@ -531,7 +609,7 @@ echo_warning() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
- echo -n $"WARNING"
+ gprintf "WARNING"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -ne "\r"
@@ -540,14 +618,15 @@ echo_warning() {
# Inform the graphical boot of our current state
update_boot_stage() {
- if [ -x /usr/bin/plymouth ]; then
- /usr/bin/plymouth --update="$1"
- fi
- return 0
+ rc_splash "$1"
}
# Log that something succeeded
success() {
+ gprintf_msg_rest "$@"
+ #if [ -z "${IN_INITLOG:-}" ]; then
+ # initlog $INITLOG_ARGS -n $0 -s "$GPRINTF_MSG" -e 1
+ #fi
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
return 0
}
@@ -555,14 +634,21 @@ success() {
# Log that something failed
failure() {
local rc=$?
+ gprintf_msg_rest "$@"
+ #if [ -z "${IN_INITLOG:-}" ]; then
+ # initlog $INITLOG_ARGS -n $0 -s "$GPRINTF_MSG" -e 2
+ #fi
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --details
return $rc
}
# Log that something passed, but may have had errors. Useful for fsck
passed() {
local rc=$?
+ gprintf_msg_rest "$@"
+ #if [ -z "${IN_INITLOG:-}" ]; then
+ # initlog $INITLOG_ARGS -n $0 -s "$GPRINTF_MSG" -e 1
+ #fi
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
return $rc
}
@@ -570,18 +656,21 @@ passed() {
# Log a warning
warning() {
local rc=$?
+ gprintf_msg_rest "$@"
+ #if [ -z "${IN_INITLOG:-}" ]; then
+ # initlog $INITLOG_ARGS -n $0 -s "$1" -e 1
+ #fi
[ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
return $rc
}
# Run some action. Log its output.
action() {
- local STRING rc
+ local rc
+ gprintf_msg_rest "$@"
+ echo -n "$GPRINTF_MSG "
- STRING=$1
- echo -n "$STRING "
- shift
- "$@" && success $"$STRING" || failure $"$STRING"
+ $GPRINTF_REST && success "$GPRINTF_MSG" || failure "$GPRINTF_MSG"
rc=$?
echo
return $rc
@@ -593,22 +682,108 @@ strstr() {
return 0
}
+
# Confirm whether we really want to run this service
confirm() {
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --hide-splash
- while : ; do
- echo -n $"Start service $1 (Y)es/(N)o/(C)ontinue? [Y] "
- read answer
- if strstr $"yY" "$answer" || [ "$answer" = "" ] ; then
- return 0
- elif strstr $"cC" "$answer" ; then
- rm -f /var/run/confirm
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --show-splash
- return 2
- elif strstr $"nN" "$answer" ; then
- return 1
- fi
- done
+ gprintf "Start service %s (Y)es/(N)o/(C)ontinue? [Y] \n" $1
+ local YES=`gprintf "yY"`
+ local NOT=`gprintf "nN"`
+ local CNT=`gprintf "cC"`
+ read answer
+
+ if strstr "$YES" "$answer" || [ "$answer" = "" ] ; then
+ return 0
+ elif strstr "$CNT" "$answer" ; then
+ return 2
+ elif strstr "$NOT" "$answer" ; then
+ return 1
+ fi
+ confirm $*
+}
+
+initsplash() {
+ [[ -f /etc/sysconfig/bootsplash ]] && source /etc/sysconfig/bootsplash
+ [[ -n $SPLASH ]] && splash_rc=$SPLASH
+ [[ -x /sbin/plymouthd ]] || splash_rc=no
+ if [ -x /sbin/plymouthd ]; then
+ splash_mode=plymouth
+ if [ -r /proc/cmdline ] && grep -q splash /proc/cmdline && [ "$splash_rc" != "no" ]; then
+ splash_rc=yes
+ else
+ splash_rc=no
+ /bin/plymouth quit 2>/dev/null
+ PLYMOUTH=
+ fi
+ else
+ splash_rc=no
+ fi
+
+ [[ $splash_rc != "no" && $splash_rc != "No" && $splash_rc != "NO" ]] && export splash_rc=yes
+ [[ $splash_mode = "plymouth" ]] || splash_rc=
+ if [[ -z "$1" ]]; then
+ set `/sbin/runlevel`
+ __runlevel=$2
+ __previous=$1
+ else
+ __runlevel=$1
+ __previous=N
+ fi
+ [ "$splash_mode" = "plymouth" -a "$splash_rc" = "yes" -a -e /sys/class/graphics/fb0 ] && [ "$__runlevel" = 0 -o "$__runlevel" = 6 ] && /sbin/plymouthd --mode=shutdown
+ export splash_mode splash_rc
+}
+
+rc_splash() {
+ [[ "$splash_rc" = "yes" ]] || return
+ if [ "$splash_mode" = "plymouth" ]; then
+ if [ "$1" = "start" ]; then
+ /bin/plymouth --show-splash 2>/dev/null
+ if [ "$2" = "1" ]; then
+ /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Booting the system... Press Esc for verbose mode.'`" 2> /dev/null
+ elif [ "$2" = "0" ]; then
+ /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Shutting down the system... Press Esc for verbose mode.'`" 2> /dev/null
+ else
+ /bin/plymouth message --text="`OUTPUT_CHARSET=UTF-8 gprintf 'Restarting the system... Press Esc for verbose mode.'`" 2> /dev/null
+ fi
+ elif [ "$1" = "stop" -o "$1" = "exit" ]; then
+ /bin/plymouth quit 2>/dev/null
+ elif [ "$1" = "umount" ]; then
+ /bin/plymouth quit --retain-splash 2>/dev/null
+ elif [ "$1" = "verbose" ]; then
+ /bin/plymouth --hide-splash 2>/dev/null
+ else
+ /bin/plymouth --update "$1" 2>/dev/null
+ fi
+ fi
+}
+
+#
+# This function finds the encoding of the current locale (it can
+# be overwritten by a "CHARSET" variable if needed); the call
+# to "locale charmap" should return the proper value; in case it
+# fails, a guess from the locale name is done.
+# this function is also defined in setsysfont script
+# if you change it here change it there too, to have the same behaviour
+#
+get_locale_encoding() {
+ CHARSET=${CHARSET=`LC_ALL=$GP_LANG locale charmap 2> /dev/null`}
+ case "$CHARSET" in
+ ANSI_X3.4-1968)
+ # this means that the locale has not been
+ # correctly initialized; we will look at the
+ # locale naming and use the known
+ # default values for various languages
+ case "${LC_ALL}${LC_CTYPE}${LANG}" in
+ # the locale tells it is in UTF-8, or it is a language
+ # we know must be in UTF-8 by default
+ *.utf8*|*.UTF-8*| \
+ am*|an*|ar*|as*|az*|bn*|cy*|eo*|fa*|gn*|gu*|he*|hi*|hy*| \
+ id*|ka*|kn*|ku*|ky*|lo*|m*|ne*|om*|pa*|ph*|se*|sr*|st*| \
+ ta*|te*|tg*|ti*|tk*|tl*|tt*|ug*|ur*|uz*|vi*|xh*|y*)
+ CHARSET="UTF-8" ;;
+ esac
+ ;;
+ esac
+ echo "$CHARSET"
}
# resolve a device node to its major:minor numbers in decimal or hex
@@ -688,14 +863,14 @@ init_crypto() {
if ! key_is_random "$key"; then
mode=$(ls -l "$key" | cut -c 5-10)
if [ "$mode" != "------" ]; then
- echo $"INSECURE MODE FOR $key"
+ gprintf "INSECURE MODE FOR %s\n" $key
fi
fi
if [ "$owner" != root ]; then
- echo $"INSECURE OWNER FOR $key"
+ gprintf "INSECURE OWNER FOR %s\n" $key
fi
else
- echo $"Key file for $dst not found, skipping"
+ gprintf "Key file for %s not found, skipping\n" $dst
ret=1
continue
fi
@@ -733,21 +908,21 @@ init_crypto() {
cipher)
params="$params -c $value"
if [ -z "$value" ]; then
- echo $"$dst: no value for cipher option, skipping"
+ gprintf "%s: no value for cipher option, skipping\n" $dst
skip="yes"
fi
;;
size)
params="$params -s $value"
if [ -z "$value" ]; then
- echo $"$dst: no value for size option, skipping"
+ gprintf "%s: no value for size option, skipping\n" $dst
skip="yes"
fi
;;
hash)
params="$params -h $value"
if [ -z "$value" ]; then
- echo $"$dst: no value for hash option, skipping"
+ gprintf "%s: no value for hash option, skipping\n" $dst
skip="yes"
fi
;;
@@ -767,7 +942,7 @@ init_crypto() {
fi
if [ -z "$makeswap" ] && cryptsetup isLuks "$src" 2>/dev/null ; then
if key_is_random "$key"; then
- echo $"$dst: LUKS requires non-random key, skipping"
+ gprintf "%s: LUKS requires non-random key, skipping\n" $dst
ret=1
continue
fi
@@ -782,8 +957,15 @@ init_crypto() {
mount_point="$(find_crypto_mount_point $dst)"
[ -n "$mount_point" ] || mount_point=${src##*/}
prompt=$(printf $"%s is password protected" "$mount_point")
- plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup luksOpen -T1 $src $dst" <&1
- rc=$?
+ if [ "$splash_rc" = yes] && [ -d /usr/share/plymouth ]; then
+ plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup luksOpen -T1 $src $dst" <&1
+ rc=$?
+ else
+ # stop splash to ask for password
+ rc_splash verbose
+ /sbin/cryptsetup luksOpen "$src" "$dst" <&1 && success || failure
+ rc=$?
+ fi
fi
else
[ -z "$key" ] && plymouth --hide-splash
diff --git a/rc.d/init.d/halt b/rc.d/init.d/halt
index cb33cbed..3f6d5dac 100755
--- a/rc.d/init.d/halt
+++ b/rc.d/init.d/halt
@@ -20,7 +20,7 @@ halt_crypto() {
[ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
if [ -b "/dev/mapper/$dst" ]; then
if /sbin/dmsetup info "$dst" | grep -q '^Open count: *0$'; then
- action $"Stopping disk encryption for $dst" /sbin/cryptsetup remove "$dst"
+ action "Stopping disk encryption for %s" $dst /sbin/cryptsetup remove "$dst"
else
fnval=1
fi
@@ -30,36 +30,27 @@ halt_crypto() {
}
kill_all() {
- local STRING rc
-
- STRING=$1
- echo -n "$STRING "
- shift
/sbin/killall5 "$@"
rc=$?
- # Retval: 0: success 1: error 2: no processes found to kill
if [ "$rc" == 1 ]; then
- failure $"$STRING"
- else
- success $"$STRING"
+ return 1
fi
- echo
- return $rc
+ return 0
}
# See how we were called.
case "$0" in
*halt)
- message=$"Halting system..."
+ message=`gprintf "Halting system..."`
command="/sbin/halt"
;;
*reboot)
- message=$"Please stand by while rebooting the system..."
+ message=`gprintf "Please stand by while rebooting the system..."`
command="/sbin/reboot"
kexec_command="/sbin/kexec"
;;
*)
- echo $"$0: call me as 'halt' or 'reboot' please!"
+ gprintf "%s: call me as 'halt' or 'reboot' please!\n" $0
exit 1
;;
esac
@@ -67,44 +58,87 @@ case "$1" in
*start)
;;
*)
- echo $"Usage: $0 {start}"
+ gprintf "Usage: %s\n" "$(basename $0) {start}"
exit 1
;;
esac
+# Recreate the /initrd if needed
+if [ ! -d /initrd ]; then
+ action "Creating initrd directory" mkdir /initrd
+fi
+if [ -d /initrd -a ! -f /initrd/README.WARNING ]; then
+ cat > /initrd/README.WARNING <<EOF
+(mkinitrd) Don't remove this directory, it's needed at boot time,
+in the initrd, to perform the pivot_root.
+EOF
+fi
+
+update_boot_stage kill
+
# Kill all processes.
[ "${BASH+bash}" = bash ] && enable kill
+OMITPIDS=
+omitfile=/var/run/sendsigs.omit
+if [ -e $omitfile ]; then
+ for pid in $(cat $omitfile); do
+ OMITPIDS="${OMITPIDS:+$OMITPIDS }-o $pid"
+ done
+fi
# Find mdmon pid's and omit killing them
OMITARGS=
-for i in /dev/md/*.pid; do
- if [ ! -r "$i" ]; then
+for i in /dev/.mdadm/*.pid; do
+ if [ "$i" = "mdadm.pid" -o ! -r "$i" ]; then
continue
fi
OMITARGS="$OMITARGS -o $(cat $i)"
done
-kill_all $"Sending all processes the TERM signal..." -15 $OMITARGS
+
+action "Sending all processes the TERM signal..." kill_all -15 $OMITPIDS $OMITARGS
+alldead=""
+for i in 0 1 2 3 4 5 6 7 8 9 10; do
+ # use SIGCONT/signal 18 to check if there are
+ # processes left. No need to check the exit code
+ # value, because either killall5 work and it make
+ # sense to wait for processes to die, or it fail and
+ # there is nothing to wait for.
+ if /sbin/killall5 -18 $OMITPIDS $OMITARGS; then
+ :
+ else
+ alldead=1
+ break
+ fi
+
+ sleep 1
+done
# No need to sleep and kill -9 if no processes to kill were found
-if [ "$?" == 0 ]; then
- sleep 2
- kill_all $"Sending all processes the KILL signal..." -9 $OMITARGS
+if [ -z "$alldead" ]; then
+ action "Sending all processes the KILL signal..." kill_all -9 $OMITPIDS $OMITARGS
fi
# Write to wtmp file before unmounting /var
/sbin/halt -w
# Save mixer settings, here for lack of a better place.
-if [ -s /etc/alsa/alsactl.conf ] && [ -x /sbin/alsactl ] && [ -w /etc/asound.state ]; then
- action $"Saving mixer settings" /sbin/alsactl -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --ignore store
+if [ -x /sbin/alsactl ]; then
+ action "Saving mixer settings" /sbin/alsactl --ignore store
fi
# Save random seed
touch /var/lib/random-seed
chmod 600 /var/lib/random-seed
-action $"Saving random seed: " dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
+action "Saving random seed: " dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
-[ -x /sbin/hwclock ] && action $"Syncing hardware clock to system time" /sbin/hwclock --systohc
+update_boot_stage clock
+[ -x /sbin/hwclock ] && action "Syncing hardware clock to system time" /sbin/hwclock --systohc
+
+if [ -x /sbin/halt.pre ]; then
+ /sbin/halt.pre
+fi
+
+update_boot_stage umount
# Try to unmount tmpfs filesystems to avoid swapping them in. Ignore failures.
tmpfs=$(awk '$2 ~ /^\/($|proc|dev)/ { next; }
@@ -114,7 +148,7 @@ tmpfs=$(awk '$2 ~ /^\/($|proc|dev)/ { next; }
# Turn off swap, then unmount file systems.
[ -f /proc/swaps ] && SWAPS=$(awk '! /^Filename/ { print $1 }' /proc/swaps)
if [ -n "$SWAPS" ]; then
- action $"Turning off swap: " swapoff $SWAPS
+ action "Turning off swap: " swapoff $SWAPS
for dst in $SWAPS; do
if [[ "$dst" == /dev/mapper* ]] \
&& [ "$(dmsetup status "$dst" | cut -d ' ' -f 3)" = crypt ]; then
@@ -125,7 +159,11 @@ if [ -n "$SWAPS" ]; then
done
fi
-[ -x /sbin/quotaoff ] && action $"Turning off quotas: " /sbin/quotaoff -aug
+[ -x /sbin/quotaoff ] && action "Turning off quotas: " /sbin/quotaoff -aug
+
+# first remove entry /initrd/loopfs as it can't be unmounted :(
+mtab=$(fgrep -v "/initrd/loopfs[^/]" /etc/mtab)
+(IFS= ; echo $mtab > /etc/mtab)
# Unmount file systems, killing processes if we have to.
# Unmount loopback stuff first
@@ -134,29 +172,61 @@ __umount_loopback_loop
# Unmount RPC pipe file systems
__umount_loop '$3 ~ /^rpc_pipefs$/ || $3 ~ /^rpc_svc_gss_pipefs$/ {print $2}' \
/proc/mounts \
- $"Unmounting pipe file systems: " \
- $"Unmounting pipe file systems (retry): " \
+ "Unmounting pipe file systems: " \
+ "Unmounting pipe file systems (retry): " \
-f
LANG=C __umount_loop '$2 ~ /^\/$|^\/proc|^\/cgroup|^\/sys\/fs\/cgroup|^\/dev/{next}
+ $2 ~ /^\/live\//{next}
$3 == "tmpfs" || $3 == "proc" {print $2 ; next}
/(loopfs|autofs|nfs|cifs|smbfs|ncpfs|sysfs|^none|^\/dev\/ram|^\/dev\/root$)/ {next}
{print $2}' /proc/mounts \
- $"Unmounting file systems: " \
- $"Unmounting file systems (retry): " \
+ "Unmounting file systems: " \
+ "Unmounting file systems (retry): " \
-f
-[ -f /proc/bus/usb/devices ] && $UMOUNT /proc/bus/usb
+update_boot_stage lvm
+
+# stop crypto devices before lvm, as they can sit on top of LVM
[ -f /etc/crypttab ] && halt_crypto
+if [ -f /etc/lvm/lvm.conf -a -x /sbin/lvm2 ]; then
+ if grep -q -s 'device-mapper' /proc/devices; then
+ _vgchange_cmd="/sbin/lvm2 vgchange -a n"
+ fi
+fi
+
+if [ -z "${_vgscan_cmd}" -a -f /etc/lvmtab -a -e /proc/lvm ] ; then
+ if [ -x /sbin/lvm1-vgchange ]; then
+ _vgchange_cmd="/sbin/lvm1-vgchange -a n"
+ elif [ -x /sbin/vgchange ]; then
+ _vgchange_cmd="/sbin/vgchange -a n"
+ fi
+fi
+
+if [ -n "${_vgchange_cmd}" ]; then
+ action "Shutting down LVM:" ${_vgchange_cmd}
+fi
+
+# for NUT
+# do it here to have /proc/usb mounted for UPS on USB
+if [ -f /etc/init.d/upsd ]; then
+ /etc/init.d/upsd powerdown
+ [ $? == 3 ] && exit 1
+fi
+
+[ -f /proc/bus/usb/devices ] && $UMOUNT /proc/bus/usb
+
# remove the crash indicator flag
rm -f /.autofsck
+update_boot_stage umount_force
+
# Try all file systems other than root, essential filesystems and RAM disks,
# one last time.
-awk '$2 !~ /\/(|dev|proc|selinux|cgroup|sys)$/ && $1 !~ /(^\/dev\/ram|cgroup)/ { print $2 }' \
- /proc/mounts | sort -r | \
+# eugeni: we should umount the filesystems in reverse order (#53042)
+tac /proc/mounts | awk '$2 !~ /\/(|dev|proc|selinux|cgroup|sys)$/ && $2 !~ /^\/live\// && $1 !~ /(^\/dev\/ram|cgroup)/ { print $2 }' | \
while read line; do
fstab-decode $UMOUNT -f $line
done
@@ -165,8 +235,7 @@ if [ -x /sbin/halt.local ]; then
/sbin/halt.local
fi
-# Tell init to re-exec itself.
-kill -TERM 1
+update_boot_stage remount_ro
# Remount read only anything that's left mounted.
# echo $"Remounting remaining filesystems readonly"
@@ -174,34 +243,39 @@ mount | awk '{ print $1,$3 }' | while read dev dir; do
fstab-decode mount -n -o ro,remount $dev $dir
done
+# (bor) it is impossible under systemd and is not required otherwise
+# action "Unmounting proc file system: " umount /proc
+
+# See if this is a powerfail situation.
+if [ -f /etc/apcupsd/powerfail ]; then
+ gprintf "APCUPSD will now power off the UPS!\n"
+ echo
+ /etc/apcupsd/apccontrol killpower
+ echo
+ gprintf "Please ensure that the UPS has powered off before rebooting\n"
+ gprintf "Otherwise, the UPS may cut the power during the reboot!!!\n"
+ echo
+fi
+
+update_boot_stage halt
+
# If we left mdmon's running wait for the raidsets to become clean
if [ -n "$OMITARGS" ]; then
mdadm --wait-clean --scan
fi
# Now halt or reboot.
-echo $"$message"
+echo "$message"
if [ -f /fastboot ]; then
- echo $"On the next boot fsck will be skipped."
+ gprintf "On the next boot fsck will be skipped.\n"
elif [ -f /forcefsck ]; then
- echo $"On the next boot fsck will be forced."
-fi
-
-# Shutdown UPS drivers
-if [ "$command" = /sbin/halt ] && [ -f /etc/sysconfig/ups ]; then
- . /etc/sysconfig/ups
- if [ -z $POWERDOWNFLAG ]; then
- POWERDOWNFLAG=/etc/killpower
- fi
- if [ "$SERVER" = "yes" ] && [ -f $POWERDOWNFLAG ]; then
- /sbin/upsdrvctl shutdown
- fi
+ gprintf "On the next boot fsck will be forced.\n"
fi
# First, try kexec. If that fails, fall back to rebooting the old way.
[ -n "$kexec_command" ] && $kexec_command -e -x >& /dev/null
-HALTARGS="-d"
+HALTARGS="-i -d"
[ "$INIT_HALT" != "HALT" ] && HALTARGS="$HALTARGS -p"
exec $command $HALTARGS
diff --git a/rc.d/init.d/killall b/rc.d/init.d/killall
index 4405879c..574f4f6f 100755
--- a/rc.d/init.d/killall
+++ b/rc.d/init.d/killall
@@ -7,7 +7,7 @@ case "$1" in
*start)
;;
*)
- echo $"Usage: $0 {start}"
+ gprintf "Usage: %s {start}\n" $0
exit 1
;;
esac
diff --git a/rc.d/init.d/netconsole b/rc.d/init.d/netconsole
index 7f91a6c6..520a846b 100644
--- a/rc.d/init.d/netconsole
+++ b/rc.d/init.d/netconsole
@@ -6,6 +6,15 @@
# description: Initializes network console logging
# config: /etc/sysconfig/netconsole
#
+### BEGIN INIT INFO
+# Provides: netconsole
+# Required-Start: $network
+# Required-Stop: $network
+# Short-Description: Initializes network console logging
+# Description: By starting this service you allow a remote syslog daemon
+# to record console output from this system.
+### END INIT INFO
+
# Copyright 2002 Red Hat, Inc.
#
# Based in part on a shell script by
@@ -33,7 +42,7 @@ kernel=$(uname -r | cut -d. -f1-2)
usage ()
{
- echo $"Usage: $0 {start|stop|status|restart|condrestart}" 1>&2
+ gprintf "Usage: %s {start|stop|status|restart|condrestart}\n" $0 1>&2
RETVAL=2
}
@@ -73,13 +82,13 @@ start ()
fi
fi
if [ -z "$SYSLOGADDR" ] ; then
- echo $"Server address not specified in /etc/sysconfig/netconsole" 1>&2
+ gprintf "Server address not specified in /etc/sysconfig/netconsole\n" 1>&2
exit 6
fi
eval $(print_address_info $SYSLOGADDR)
if [ -z "$SYSLOGMACADDR" ]; then
- echo $"netconsole: can't resolve MAC address of $SYSLOGADDR" 1>&2
+ gprintf "netconsole: can't resolve MAC address of %s\n" $SYSLOGADDR 1>&2
exit 1
fi
@@ -88,7 +97,7 @@ start ()
/usr/bin/logger -p daemon.info -t netconsole: inserting netconsole module with arguments \
$SYSLOGOPTS
if [ -n "$SYSLOGOPTS" ]; then
- action $"Initializing netconsole" modprobe netconsole \
+ action "Initializing netconsole" modprobe netconsole \
$SYSLOGOPTS
[ "$?" != "0" ] && RETVAL=1
fi
@@ -98,7 +107,7 @@ start ()
stop ()
{
if /sbin/lsmod | grep netconsole >/dev/null 2>&1 ; then
- action $"Disabling netconsole" rmmod netconsole;
+ action "Disabling netconsole" rmmod netconsole;
[ "$?" != "0" ] && RETVAL=1
fi
@@ -108,10 +117,10 @@ stop ()
status ()
{
if /sbin/lsmod | grep netconsole >/dev/null 2>&1 ; then
- echo $"netconsole module loaded"
+ gprintf "netconsole module loaded\n"
RETVAL=0
else
- echo $"netconsole module not loaded"
+ gprintf "netconsole module not loaded\n"
RETVAL=3
fi
}
diff --git a/rc.d/init.d/netfs b/rc.d/init.d/netfs
index 8d9854fb..d3f22714 100755
--- a/rc.d/init.d/netfs
+++ b/rc.d/init.d/netfs
@@ -9,10 +9,17 @@
# chkconfig: 345 25 75
# description: Mounts and unmounts all Network File System (NFS), \
# CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
+#
### BEGIN INIT INFO
# Provides: $remote_fs
-# Short-Description: Mount and unmount network filesystems.
-# Description: Mount and unmount network filesystems.
+# Required-Start: $network
+# Should-Start: $portmap nfs-common
+# Required-Stop: $network
+# Should-Stop: $portmap nfs-common
+# Default-Start: 3 4 5
+# Short-Description: Mount network filesystems.
+# Description: Mounts and unmounts all Network File System (NFS),
+# SMB/CIFS (Lan Manager/Windows), and NCP (NetWare) mount points.
### END INIT INFO
[ -f /etc/sysconfig/network ] || exit 0
@@ -36,11 +43,10 @@ case "$1" in
[ "$EUID" != "0" ] && exit 4
[ -n "$NFSFSTAB" ] &&
{
- [ ! -f /var/lock/subsys/rpcbind ] && service rpcbind start
- action $"Mounting NFS filesystems: " mount -a -t nfs,nfs4
+ action "Mounting NFS filesystems: " mount -a -t nfs,nfs4
}
- [ -n "$CIFSFSTAB" ] && action $"Mounting CIFS filesystems: " mount -a -t cifs
- [ -n "$NCPFSTAB" ] && action $"Mounting NCP filesystems: " mount -a -t ncpfs
+ [ -n "$CIFSFSTAB" ] && action "Mounting CIFS filesystems: " mount -a -t cifs
+ [ -n "$NCPFSTAB" ] && action "Mounting NCP filesystems: " mount -a -t ncpfs
[ -n "$NETDEVFSTAB" ] &&
{
if [ -f /etc/mdadm.conf ]; then
@@ -55,7 +61,7 @@ case "$1" in
fi
if [ -x /sbin/lvm ]; then
if /sbin/lvm vgscan > /dev/null 2>&1 ; then
- action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y
+ action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y
fi
fi
@@ -63,7 +69,7 @@ case "$1" in
init_crypto 1
fi
- STRING=$"Checking network-attached filesystems"
+ STRING=`gprintf "Checking network-attached filesystems"`
echo $STRING
fsck -A -T -R -a -t opts=_netdev
@@ -85,11 +91,11 @@ case "$1" in
tty >/dev/null 2>&1 || exit 1
echo
echo
- echo $"*** An error occurred during the file system check."
- echo $"*** Dropping you to a shell; the system will reboot"
- echo $"*** when you leave the shell."
+ gprintf "*** An error occurred during the file system check.\n"
+ gprintf "*** Dropping you to a shell; the system will reboot\n"
+ gprintf "*** when you leave the shell.\n"
- str=$"(Repair filesystem)"
+ str=`gprintf "(Repair filesystem)"`
PS1="$str \# # "; export PS1
[ "$SELINUX" = "1" ] && disable_selinux
sulogin
@@ -98,7 +104,7 @@ case "$1" in
fi
}
touch /var/lock/subsys/netfs
- action $"Mounting other filesystems: " mount -a -t nonfs,nfs4,cifs,ncpfs,gfs
+ action "Mounting other filesystems: " mount -a -t nonfs,nfs4,cifs,ncpfs,gfs -O noencrypted
;;
stop)
# Unmount loopback stuff first
@@ -107,14 +113,14 @@ case "$1" in
if [ -n "$NETDEVMTAB" ]; then
__umount_loop '$4 ~ /_netdev/ && $2 != "/" {print $2}' \
/etc/mtab \
- $"Unmounting network block filesystems: " \
- $"Unmounting network block filesystems (retry): "
+ "Unmounting network block filesystems: " \
+ "Unmounting network block filesystems (retry): "
fi
if [ -n "$NFSMTAB" ]; then
__umount_loop '$3 ~ /^nfs/ && $3 != "nfsd" && $2 != "/" {print $2}' \
/proc/mounts \
- $"Unmounting NFS filesystems: " \
- $"Unmounting NFS filesystems (retry): " \
+ "Unmounting NFS filesystems: " \
+ "Unmounting NFS filesystems (retry): " \
"-f -l"
fi
if [ -n "$CIFSMTAB" ]; then
@@ -132,39 +138,39 @@ case "$1" in
status)
if [ -f /proc/mounts ] ; then
[ -n "$NFSFSTAB" ] && {
- echo $"Configured NFS mountpoints: "
+ gprintf "Configured NFS mountpoints: \n"
for fs in $NFSFSTAB; do echo $fs ; done
}
[ -n "$CIFSFSTAB" ] && {
- echo $"Configured CIFS mountpoints: "
+ gprintf "Configured CIFS mountpoints: \n"
for fs in $CIFSFSTAB; do echo $fs ; done
}
[ -n "$NCPFSTAB" ] && {
- echo $"Configured NCP mountpoints: "
+ gprintf "Configured NCP mountpoints: \n"
for fs in $NCPFSTAB; do echo $fs ; done
}
[ -n "$NETDEVFSTAB" ] && {
- echo $"Configured network block devices: "
+ gprintf "Configured network block devices: \n"
for fs in $NETDEVFSTAB; do echo $fs ; done
}
[ -n "$NFSMTAB" ] && {
- echo $"Active NFS mountpoints: "
+ gprintf "Active NFS mountpoints: \n"
for fs in $NFSMTAB; do echo $fs ; done
}
[ -n "$CIFSMTAB" ] && {
- echo $"Active CIFS mountpoints: "
+ gprintf "Active CIFS mountpoints: \n"
for fs in $CIFSMTAB; do echo $fs ; done
}
[ -n "$NCPMTAB" ] && {
- echo $"Active NCP mountpoints: "
+ gprintf "Active NCP mountpoints: \n"
for fs in $NCPMTAB; do echo $fs ; done
}
[ -n "$NETDEVMTAB" ] && {
- echo $"Active network block devices: "
+ gprintf "Active network block devices: \n"
for fs in $NETDEVMTAB; do echo $fs ; done
}
else
- echo $"/proc filesystem unavailable"
+ gprintf "/proc filesystem unavailable\n"
fi
[ -r /var/lock/subsys/netfs ] || exit 3
;;
@@ -178,7 +184,7 @@ case "$1" in
exit $?
;;
*)
- echo $"Usage: $0 {start|stop|restart|reload|status}"
+ gprintf "Usage: %s\n" "$(basename $0) {start|stop|restart|reload|status}"
exit 2
esac
diff --git a/rc.d/init.d/network b/rc.d/init.d/network
index b31060b0..c10f5504 100755
--- a/rc.d/init.d/network
+++ b/rc.d/init.d/network
@@ -5,9 +5,16 @@
# chkconfig: - 10 90
# description: Activates/Deactivates all network interfaces configured to \
# start at boot time.
+# probe: false
#
### BEGIN INIT INFO
-# Provides: $network
+# Provides: network
+# Should-Start: harddrake irda resolvconf slmodemd
+# Should-Stop: irda resolvconf slmodemd
+# Default-Start: 2 3 4 5
+# Short-Description: Bring up/down networking
+# Description: Activates/Deactivates all network interfaces configured to
+# start at boot time.
# Should-Start: iptables ip6tables
# Short-Description: Bring up/down networking
# Description: Bring up/down networking
@@ -17,6 +24,7 @@
. /etc/init.d/functions
if [ ! -f /etc/sysconfig/network ]; then
+ echo "NETWORKING=no" > /etc/sysconfig/network
exit 6
fi
@@ -63,8 +71,12 @@ case "$1" in
sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
+ if [ -r /etc/ethers -a -x /sbin/arp ]; then
+ action "Storing ARP mapping" /sbin/arp -f /etc/ethers
+ fi
+
# bring up loopback interface
- action $"Bringing up loopback interface: " ./ifup ifcfg-lo
+ action "Bringing up loopback interface: " ./ifup ifcfg-lo
case "$IPX" in
yes|true)
@@ -75,11 +87,16 @@ case "$1" in
fi
;;
esac
+ # depreciated but we still use it.
+ if [ -f /proc/sys/net/ipv4/ip_forward ] && [[ "$FORWARD_IPV4" = "yes" || "$FORWARD_IPV4" = "true" ]];
+ then
+ action "Enabling IPv4 packet forwarding" sysctl -w net.ipv4.ip_forward=1
+ fi
case "$VLAN" in
yes)
if [ ! -d /proc/net/vlan ] && ! modprobe 8021q >/dev/null 2>&1 ; then
- echo $"No 802.1Q VLAN support available in kernel."
+ gprintf "No 802.1Q VLAN support available in kernel.\n"
fi
;;
esac
@@ -89,6 +106,14 @@ case "$1" in
xdslinterfaces=""
bridgeinterfaces=""
+ # do we have wireless cards?
+ iwconfig 2>/dev/null | grep IEEE > /dev/null
+ has_wifi=$?
+ # configure CRDA domain
+ if [ -n "${CRDA_DOMAIN}" -a -x /sbin/iw -a "$has_wifi" == 0 ]; then
+ action "Configuring wireless regulatory domain " /sbin/iw reg set ${CRDA_DOMAIN}
+ fi
+
# bring up all other interfaces configured to come up at boot time
for i in $interfaces; do
unset DEVICE TYPE SLAVE
@@ -102,7 +127,7 @@ case "$1" in
vpninterfaces="$vpninterfaces $i"
continue
fi
- if [ "$TYPE" = "xDSL" ]; then
+ if [ "$TYPE" = "xDSL" -o "$TYPE" = "ADSL" ]; then
xdslinterfaces="$xdslinterfaces $i"
continue
fi
@@ -131,11 +156,22 @@ case "$1" in
continue
fi
# If we're in confirmation mode, get user confirmation.
- if [ -f /var/run/confirm ]; then
- confirm $i
- test $? = 1 && continue
- fi
- action $"Bringing up interface $i: " ./ifup $i boot
+ [ -f /var/run/confirm ] &&
+ {
+ confirm $i
+ case $? in
+ 0)
+ :
+ ;;
+ 2)
+ CONFIRM=
+ ;;
+ *)
+ continue
+ ;;
+ esac
+ }
+ action "Bringing up interface %s: " $i ./ifup $DEVICE boot
[ $? -ne 0 ] && rc=1
done
@@ -147,7 +183,7 @@ case "$1" in
confirm $i
test $? = 1 && continue
fi
- action $"Bringing up interface $i: " ./ifup $i boot
+ action "Bringing up interface %s: " $i ./ifup $i boot
[ $? -ne 0 ] && rc=1
fi
done
@@ -165,10 +201,8 @@ case "$1" in
fi
# Run this again to catch any interface-specific actions
sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
-
- touch /var/lock/subsys/network
- [ -n "${NETWORKDELAY}" ] && /bin/sleep ${NETWORKDELAY}
+ touch /var/lock/subsys/network
;;
stop)
[ "$EUID" != "0" ] && exit 4
@@ -219,7 +253,7 @@ case "$1" in
bridgeinterfaces="$bridgeinterfaces $i"
continue
fi
- if [ "$TYPE" = "xDSL" ]; then
+ if [ "$TYPE" = "xDSL" -o "$TYPE" = "ADSL" ]; then
xdslinterfaces="$xdslinterfaces $i"
continue
fi
@@ -236,7 +270,7 @@ case "$1" in
if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
if ! check_device_down $DEVICE; then
- action $"Shutting down interface $i: " ./ifdown $i boot
+ action "Shutting down interface %s: " $i ./ifdown $i boot
[ $? -ne 0 ] && rc=1
fi
)
@@ -250,9 +284,25 @@ case "$1" in
;;
esac
- action $"Shutting down loopback interface: " ./ifdown ifcfg-lo
+ action "Shutting down loopback interface: " ./ifdown ifcfg-lo
- sysctl -w net.ipv4.ip_forward=0 > /dev/null 2>&1
+ if [ -d /proc/sys/net/ipv4 ]; then
+ if [ -f /proc/sys/net/ipv4/ip_forward ]; then
+ if [ $(cat /proc/sys/net/ipv4/ip_forward) != 0 ]; then
+ action "Disabling IPv4 packet forwarding: " sysctl -w net.ipv4.ip_forward=0
+ fi
+ fi
+ if [ -f /proc/sys/net/ipv4/ip_always_defrag ]; then
+ if [ $(cat /proc/sys/net/ipv4/ip_always_defrag) != 0 ]; then
+ action "Disabling IPv4 automatic defragmentation: " sysctl -w net.ipv4.ip_always_defrag=0
+ fi
+ fi
+ fi
+ if [ -f /proc/sys/net/ipv4/tcp_syncookies ];then
+ if [ `cat /proc/sys/net/ipv4/tcp_syncookies` != 0 ]; then
+ sysctl -w net.ipv4.tcp_syncookies=0
+ fi
+ fi
# IPv6 hook (post IPv4 stop)
if [ -x /etc/sysconfig/network-scripts/init.ipv6-global ]; then
@@ -262,10 +312,10 @@ case "$1" in
rm -f /var/lock/subsys/network
;;
status)
- echo $"Configured devices:"
+ gprintf "Configured devices:\n"
echo lo $interfaces
- echo $"Currently active devices:"
+ gprintf "Currently active devices:\n"
echo $(/sbin/ip -o link show up | awk -F ": " '{ print $2 }')
;;
restart|reload|force-reload)
@@ -275,7 +325,7 @@ case "$1" in
rc=$?
;;
*)
- echo $"Usage: $0 {start|stop|status|restart|reload|force-reload}"
+ gprintf "Usage: %s\n" "$(basename $0) {start|stop|restart|reload|status}"
exit 2
esac
diff --git a/rc.d/init.d/single b/rc.d/init.d/single
index 0ae9268e..8f37963a 100755
--- a/rc.d/init.d/single
+++ b/rc.d/init.d/single
@@ -16,9 +16,25 @@ if [ "$1" != "start" ]; then
exit 0
fi
+# killing splashy (#46169)
+update_boot_stage exit
+
+# Kill all processes.
+[ "${BASH+bash}" = bash ] && enable kill
+
+gprintf "Sending all processes the TERM signal...\n"
+kill -15 -1
+sleep 5
+gprintf "Sending all processes the KILL signal..\n"
+kill -9 -1
+
# this looks nicer
[ -x /usr/bin/clear ] && /usr/bin/clear
# Now go to the single user level.
-echo $"Telling INIT to go to single user mode."
+gprintf "Telling INIT to go to single user mode.\n"
+
+# init hangs if LANG is set
+unset LANG
+
exec init -t1 S
diff --git a/rc.d/rc b/rc.d/rc
index 678bb5e5..808283dd 100755
--- a/rc.d/rc
+++ b/rc.d/rc
@@ -25,6 +25,24 @@ runlevel=$2
previous=$1
export runlevel previous
+# Get first argument. Set new runlevel to this argument.
+if [ "$argv1" != "" ] ; then
+ newrunlevel="$argv1"
+else
+ newrunlevel="$runlevel"
+fi
+
+if [ "$previous" = "N" ];then
+ if [ -e /var/run/failsafe ];then
+ rm -f /var/run/failsafe
+ if [ -x /sbin/askrunlevel ];then
+ /sbin/askrunlevel --interactive && ASKRUNLEVEL=no
+ else
+ init 1 #jump to init 1 if not aksrunlevel.
+ fi
+ fi
+fi
+
. /etc/init.d/functions
export CONSOLETYPE
@@ -37,10 +55,14 @@ UPSTART=
# See if we want to be in user confirmation mode
if [ "$previous" = "N" ]; then
if [ "$do_confirm" = "yes" ]; then
- echo $"Entering interactive startup"
+ gprintf "Entering interactive startup\n"
else
- echo $"Entering non-interactive startup"
+ gprintf "Entering non-interactive startup\n"
fi
+elif [[ "$newrunlevel" = "0" || "$newrunlevel" = "6" ]]; then
+ [ -x /etc/rc.d/init.d/dm -a -f /var/lock/subsys/dm ] && /etc/init.d/dm stop 2> /dev/null
+ chvt 1
+ exec &> /dev/console
fi
# Get first argument. Set new runlevel to this argument.
@@ -52,26 +74,44 @@ fi
# Set language, vc settings once to avoid doing it for every init script
# through functions
if [ -z "${NOLOCALE:-}" ] && [ -f /etc/sysconfig/i18n ] ; then
- . /etc/profile.d/lang.sh 2>/dev/null
+ . /etc/profile.d/10lang.sh 2>/dev/null
export LANGSH_SOURCED=1
fi
+initsplash
+[[ "$newrunlevel" = "0" || "$newrunlevel" = "6" ]] && [ "$splash_mode" = "plymouth" ] && rc_splash start $newrunlevel
+
+nopinit=`grep nopinit /proc/cmdline`
+
+rc_mode=K
+export rc_mode
+
# First, run the KILL scripts.
-for i in /etc/rc$runlevel.d/K* ; do
+if [ -z "$nopinit" ]; then
+ /sbin/prcsys K /etc/rc$runlevel.d/
+else
+ for i in /etc/rc$runlevel.d/K* ; do
# Check if the subsystem is already up.
subsys=${i#/etc/rc$runlevel.d/K??}
[ -f /var/lock/subsys/$subsys ] || [ -f /var/lock/subsys/$subsys.init ] || continue
check_runlevel "$i" || continue
+ update_boot_stage "$subsys"
# Bring the subsystem down.
[ -n "$UPSTART" ] && initctl emit --quiet stopping JOB=$subsys
- $i stop
+ action "Stopping %s: " $subsys $i stop
[ -n "$UPSTART" ] && initctl emit --quiet stopped JOB=$subsys
-done
+ done
+fi
+
+rc_mode=S
-# Now run the START scripts.
-for i in /etc/rc$runlevel.d/S* ; do
+if [ -z "$nopinit" ] && [ "$do_confirm" != "yes" -a "$runlevel" != "0" -a "$runlevel" != "1" -a "$runlevel" != "6" ]; then
+ /sbin/prcsys S /etc/rc$runlevel.d/
+else
+ # Now run the START scripts.
+ for i in /etc/rc$runlevel.d/S* ; do
# Check if the subsystem is already up.
subsys=${i#/etc/rc$runlevel.d/S??}
@@ -97,8 +137,14 @@ for i in /etc/rc$runlevel.d/S* ; do
export LC_ALL=C
exec $i start
fi
- $i start
+ action "Starting %s: " $subsys $i start
[ -n "$UPSTART" ] && initctl emit --quiet started JOB=$subsys
-done
+
+ done
+fi
+
+if [[ "$newrunlevel" != "0" && "$newrunlevel" != "6" && "$newrunlevel" != "S" && "$newrunlevel" != "5" ]]; then
+ rc_splash stop
+fi
[ "$do_confirm" = "yes" ] && rm -f /var/run/confirm
exit 0
diff --git a/rc.d/rc.local b/rc.d/rc.local
index 0036e6c5..6d125d8b 100755
--- a/rc.d/rc.local
+++ b/rc.d/rc.local
@@ -1,7 +1,13 @@
#!/bin/sh
#
-# This script will be executed *after* all the other init scripts.
-# You can put your own initialization stuff in here if you don't
-# want to do the full Sys V style init stuff.
+### BEGIN INIT INFO
+# Provides: rc.local
+# X-Mandriva-Compat-Mode
+# Default-Start: 2 3 4 5
+# Short-Description: Local initialization script
+# Description: This script will be executed *after* all the other init scripts.
+# You can put your own initialization stuff in here if you don't
+# want to do the full Sys V style init stuff.
+### END INIT INFO
touch /var/lock/subsys/local
diff --git a/rc.d/rc.sysinit b/rc.d/rc.sysinit
index f8f701af..b4779b18 100755
--- a/rc.d/rc.sysinit
+++ b/rc.d/rc.sysinit
@@ -7,11 +7,19 @@
HOSTNAME=$(/bin/hostname)
+. /etc/init.d/functions
+
set -m
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
fi
+
+# Read in config data.
+if [ -f /etc/sysconfig/system ]; then
+ . /etc/sysconfig/system
+fi
+
if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
HOSTNAME=localhost
fi
@@ -20,16 +28,131 @@ if [ ! -e /proc/mounts ]; then
mount -n -t proc /proc /proc
mount -n -t sysfs /sys /sys >/dev/null 2>&1
fi
+
+PLYMOUTH=
+[ -x /bin/plymouth ] && PLYMOUTH=yes
+
+
+# Only read this once.
+cmdline=$(cat /proc/cmdline)
+
+for t in $cmdline; do
+ case $t in
+ -s|single|S|s) REQUESTED_RUNLEVEL="S" ;;
+ [1-9]) REQUESTED_RUNLEVEL="$t" ;;
+ esac
+done
+[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
+[ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL="3"
+
+# killing splash when using single-user mode
+if [ "$REQUESTED_RUNLEVEL" == "S" ]; then
+ [ -n "$PLYMOUTH" ] && /bin/plymouth quit 2>/dev/null
+fi
+
+uname_r=`uname -r`
+
+# Read in config data.
+if [ -f /etc/sysconfig/speedboot ]; then
+ . /etc/sysconfig/speedboot
+fi
+
+if strstr "$cmdline" speedboot= ; then
+ for arg in $cmdline ; do
+ if [ "${arg##speedboot=}" != "${arg}" ]; then
+ SPEEDBOOT=${arg##speedboot=}
+ fi
+ done
+fi
+
+if [ "$REQUESTED_RUNLEVEL" != 5 -o -f /etc/rc.d/rc5.d/S*network-auth -o -f /etc/crypttab ]; then
+ SPEEDBOOT=no
+fi
+
+# disable speedboot if more than one profile is found (and not selected in cmdline)
+if echo /etc/netprofile/profiles/* | grep -q ' ' ; then
+ if ! strstr "$cmdline" PROFILE= ; then
+ SPEEDBOOT=no
+ fi
+fi
+
+if strstr "$cmdline" failsafe ; then
+ SPEEDBOOT=no
+fi
+
+# Check if a possible DKMS display driver is queued to be built on this boot
+# or an interfering driver was loaded by initrd.
+if [ "$SPEEDBOOT" != "no" ] && [ -x /sbin/display_driver_helper ] && ! /sbin/display_driver_helper --check-speedboot; then
+ SPEEDBOOT=no
+fi
+
+if [ "$SPEEDBOOT" = "probe" ]; then
+ SPEEDBOOT_PROBE=yes
+fi
+
+if [ "x$SPEEDBOOT" = "xauto" ]; then
+ STATUS=`grep -m 1 "$uname_r" /var/lib/speedboot/status 2>/dev/null`
+ case "$STATUS" in
+ *first\ time*) SPEEDBOOT=yes ;;
+ *FAILED*) SPEEDBOOT=no ;;
+ *OK*) SPEEDBOOT=yes ;;
+ *STANDARD\ BOOT*) SPEEDBOOT=yes ;;
+ *) SPEEDBOOT=no ;;
+ esac
+fi
+
+if [ "$SPEEDBOOT" = "yes" ]; then
+ export SPEEDBOOT
+ PROMPT=no
+else
+ unset SPEEDBOOT
+fi
+
+if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ ! -d /proc/bus/usb ]; then
- modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs /proc/bus/usb /proc/bus/usb
+ modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
else
- mount -n -t usbfs /proc/bus/usb /proc/bus/usb
+ mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
fi
+fi #SPEEDBOOT
-. /etc/init.d/functions
+if [ -f /.readahead_collect -a -r /etc/sysconfig/readahead ]; then
+ . /etc/sysconfig/readahead
+ if [ "x$READAHEAD_COLLECT" == "xyes" -a ! -f /forcefsck -a -x /sbin/readahead-collector ]; then
+ /sbin/readahead-collector
+ fi
+elif [ -x /sbin/readahead_early ]; then
+ /sbin/readahead_early > /dev/null 2>&1
+fi
+
+if [ -x /etc/rc.early.local ]; then
+ . /etc/rc.early.local
+fi
-PLYMOUTH=
-[ -x /usr/bin/plymouth ] && PLYMOUTH=yes
+# Unmount the initrd, if necessary
+# (pixel) do not unmount if /initrd/loopfs is mounted (happens for root loopback)
+# (bluca) handle udev /dev tmpfs here since kernel will happily umount /dev after initrd end
+# (blino) do it before the udev service is started so that it uses the /dev tmpfs from initrd
+if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then
+ if LC_ALL=C grep -q /initrd/dev /proc/mounts; then
+ mount --move /initrd/dev /dev
+ fi
+ action "Unmounting initrd: " umount -l /initrd
+ /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1
+fi
+
+if [ "x$SPEEDBOOT" = "xyes" ]; then
+ /sbin/start_udev
+ udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x0c03*"
+ udevadm trigger --action=add --subsystem-match=block
+ udevadm settle &
+ UDEV_DISK_PID=$!
+ udevadm trigger --action=add --subsystem-match=mem --subsystem-match=input --subsystem-match=tty --subsystem-match=acpi --subsystem-match=rtc --subsystem-match=hid
+ udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x060000*"
+ udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x03*"
+ udevadm settle &
+ UDEV_PID=$!
+fi
# Check SELinux status
SELINUX_STATE=
@@ -47,9 +170,9 @@ if [ -n "$SELINUX_STATE" ] && [ -x /sbin/restorecon ] && __fgrep " /dev " /proc/
fi
disable_selinux() {
- echo $"*** Warning -- SELinux is active"
- echo $"*** Disabling security enforcement for system recovery."
- echo $"*** Run 'setenforce 1' to reenable."
+ gprintf "*** Warning -- SELinux is active\n"
+ gprintf "*** Disabling security enforcement for system recovery.\n"
+ gprintf "*** Run 'setenforce 1' to reenable.\n"
echo "0" > "/selinux/enforce"
}
@@ -63,50 +186,57 @@ relabel_selinux() {
if [ "$AUTORELABEL" = "0" ]; then
echo
- echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required. "
- echo $"*** /etc/selinux/config indicates you want to manually fix labeling"
- echo $"*** problems. Dropping you to a shell; the system will reboot"
- echo $"*** when you leave the shell."
+ gprintf "*** Warning -- SELinux %s policy relabel is required. \n" ${SELINUXTYPE}
+ gprintf "*** /etc/selinux/config indicates you want to manually fix labeling\n"
+ gprintf "*** problems. Dropping you to a shell; the system will reboot\n"
+ gprintf "*** when you leave the shell.\n"
sulogin
else
echo
- echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required."
- echo $"*** Relabeling could take a very long time, depending on file"
- echo $"*** system size and speed of hard drives."
+ gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE}
+ gprintf "*** Relabeling could take a very long time, depending on file\n"
+ gprintf "*** system size and speed of hard drives.\n"
/sbin/fixfiles -F restore > /dev/null 2>&1
fi
rm -f /.autorelabel
- echo $"Unmounting file systems"
+ gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
+ gprintf "Automatic reboot in progress.\n"
reboot -f
}
# Print a text banner.
-echo -en $"\t\tWelcome to "
-read -r system_release < /etc/system-release
-if [[ "$system_release" == *"Red Hat"* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
- echo -en "Red Hat"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Red Hat \(.*\) release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
-elif [[ "$system_release" == *Fedora* ]]; then
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;34m"
- echo -en "Fedora"
- [ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
- PRODUCT=$(sed "s/Fedora \(.*\) \?release.*/\1/" /etc/system-release)
- echo " $PRODUCT"
+# C-like escape sequences don't work as 2nd and up parameters of gprintf,
+# so real escap chars were written
+PRODUCT=`sed "s/.*release \([0-9.]*\).*/\1/g" /etc/mandriva-release 2> /dev/null`
+SYSTEM=${SYSTEM="Mandriva Linux"}
+
+if [ -r /etc/sysconfig/oem ]; then
+ . /etc/sysconfig/oem
+fi
+
+if [ "$BOOTUP" != "serial" ]; then
+ gprintf "\t\t\tWelcome to %s" "`echo -en '\\033[1;36m'`$SYSTEM`echo -en '\\033[0;39m'` $PRODUCT"
else
- PRODUCT=$(sed "s/ release.*//g" /etc/system-release)
- echo "$PRODUCT"
+ gprintf "\t\t\tWelcome to %s" "$SYSTEM $PRODUCT"
+fi
+echo -en "\r"
+echo
+if [ "$PROMPT" != "no" ]; then
+ gprintf "\t\tPress 'I' to enter interactive startup."
+ echo
fi
-# Only read this once.
-cmdline=$(cat /proc/cmdline)
+# Fix console loglevel
+if [ -n "$LOGLEVEL" ]; then
+ /bin/dmesg -n $LOGLEVEL
+fi
+
+initsplash 5
+rc_splash start 1
# Initialize hardware
if [ -f /proc/sys/kernel/modprobe ]; then
@@ -134,7 +264,9 @@ fi
nashpid=$(pidof nash 2>/dev/null)
[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
unset nashpid
-/sbin/start_udev
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+ /sbin/start_udev
+fi #SPEEDBOOT
# Load other user-defined modules
for file in /etc/sysconfig/modules/*.modules ; do
@@ -143,12 +275,19 @@ done
# Load modules (for backward compatibility with VARs)
if [ -f /etc/rc.modules ]; then
+ if [ "x$SPEEDBOOT" != "xyes" ]; then
/etc/rc.modules
+ else
+ ionice -c 3 /etc/rc.modules &
+ MODULES_PID=$!
+ fi
fi
-mount -n /dev/pts >/dev/null 2>&1
+mount -n -t devpts -o mode=620 none /dev/pts >/dev/null 2>&1
[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
+mount -n -t tmpfs none /dev/shm >/dev/null 2>&1
+
# Configure kernel parameters
update_boot_stage RCkernelparam
sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
@@ -157,18 +296,55 @@ for file in /etc/sysctl.d/* ; do
test -f "$file" && sysctl -e -p "$file" >/dev/null 2>&1
done
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+
+# If brltty exist start it (after udev so that vcsa device nodes are created)
+[ -x /bin/brltty -a "$BRLTTY" != "no" ] && action "Starting braille terminal" /bin/brltty && SPEEDBOOT="DISABLED reason: braille"
+
+fi #SPEEDBOOT
+
# Set the hostname.
update_boot_stage RChostname
-action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
+action "Setting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
+# Set the NIS domain name
+if [ -n "$NISDOMAIN" ]; then
+ action "Setting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
+fi
+
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+# Now that we load only one scsi_hostadapter in the initrd, we
+# need to load the others here
+modprobe scsi_hostadapter >/dev/null 2>&1
+# Now that we use modular IDE, we need to do the same for IDE controllers
+modprobe ide-controller >/dev/null 2>&1
# Sync waiting for storage.
{ rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1
+# Start any MD RAID arrays that haven't been started yet
+if [ -f /etc/mdadm.conf -a -x /sbin/mdadm ]; then
+ MDADM_RETURN=`/sbin/mdadm -As --auto=yes --run 2>&1`
+ RETVAL=$?
+ if [ $RETVAL -gt 0 ]; then
+ echo $MDADM_RETURN | grep -q 'No arrays found in config file'
+ RETVAL=$?
+ # only enable speedboot if no array is configured
+ if [ $RETVAL -gt 0 ]; then
+ SPEEDBOOT="DISABLED: reason:MD RAID"
+ fi
+ else # MD RAID arrays detected, better to disable speedboot
+ SPEEDBOOT="DISABLED: reason:MD RAID"
+
+ fi
+fi
+fi #SPEEDBOOT
+
# Device mapper & related initialization
if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then
modprobe dm-mod >/dev/null 2>&1
fi
+if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 0
fi
@@ -184,29 +360,31 @@ fi
if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then
modprobe dm-mirror >/dev/null 2>&1
- dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
- if [ "$?" = "0" ]; then
- for dmname in $dmraidsets; do
- if [[ "$dmname" == isw_* ]] && \
- ! strstr "$cmdline" noiswmd; then
- continue
- fi
- /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
- /sbin/kpartx -a -p p "/dev/mapper/$dmname"
- done
+ dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i)
+ if [ "$dmraidsets" != "no raid disks" -a "$dmraidsets" != "no block devices found" ]; then
+ for dmname in $dmraidsets; do
+ if [[ "$dmname" =~ '^isw_.*' ]] && \
+ ! strstr "$cmdline" noiswmd; then
+ continue
+ fi
+
+ /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1
+ /sbin/kpartx -a -p p "/dev/mapper/$dmname"
+ SPEEDBOOT="DISABLED reason:dmraid"
+ done
+ fi
fi
-fi
-
-# Start any MD RAID arrays that haven't been started yet
-[ -r /proc/mdstat -a -r /dev/md/md-device-map ] && /sbin/mdadm -IRs
-
+fi #SPEEDBOOT
+
if [ -x /sbin/lvm ]; then
- action $"Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --sysinit
+ action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --ignorelockingfailure
fi
+if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 0
fi
+fi #SPEEDBOOT
if [ -f /fastboot ] || strstr "$cmdline" fastboot ; then
fastboot=yes
@@ -216,19 +394,22 @@ if [ -f /fsckoptions ]; then
fsckoptions=$(cat /fsckoptions)
fi
+# (blino) always source autofsck settings, for AUTOFSCK_CRYPTO_TIMEOUT (#16029)
+[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
+
if [ -f /forcefsck ] || strstr "$cmdline" forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f /.autofsck ]; then
- [ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
[ -n "$PLYMOUTH" ] && plymouth --hide-splash
+ rc_splash verbose
echo
- echo $"*** Warning -- the system did not shut down cleanly. "
- echo $"*** Dropping you to a shell; the system will continue"
- echo $"*** when you leave the shell."
+ gprintf "*** Warning -- the system did not shut down cleanly. \n"
+ gprintf "*** Dropping you to a shell; the system will continue\n"
+ gprintf "*** when you leave the shell.\n"
[ -n "$SELINUX_STATE" ] && echo "0" > /selinux/enforce
sulogin
[ -n "$SELINUX_STATE" ] && echo "1" > /selinux/enforce
@@ -398,52 +579,51 @@ _RUN_QUOTACHECK=0
if strstr "$cmdline" forcequotacheck || [ -f /forcequotacheck ] ; then
_RUN_QUOTACHECK=1
fi
-if [ -z "$fastboot" -a "$READONLY" != "yes" ]; then
-
- STRING=$"Checking filesystems"
- echo $STRING
- fsck -T -t noopts=_netdev -A $fsckoptions
+Fsck()
+{
+ fsck $*
rc=$?
if [ "$rc" -eq "0" ]; then
- success "$STRING"
+ echo_success
echo
elif [ "$rc" -eq "1" ]; then
- passed "$STRING"
+ echo_passed
echo
+ _RUN_QUOTACHECK=1
elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
- echo $"Unmounting file systems"
+ gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
+ gprintf "Automatic reboot in progress.\n"
reboot -f
- fi
-
- # A return of 4 or higher means there were serious problems.
- if [ $rc -gt 1 ]; then
- [ -n "$PLYMOUTH" ] && plymouth --hide-splash
-
- failure "$STRING"
+ elif [ $((rc & 4)) = 4 ]; then
+ # Return code is a or between return codes for the filesystems
+ # 4 means that a filesystem remains corrupted
+ rc_splash verbose
+ echo_failure
echo
echo
- echo $"*** An error occurred during the file system check."
- echo $"*** Dropping you to a shell; the system will reboot"
- echo $"*** when you leave the shell."
+ gprintf "*** An error occurred during the file system check.\n"
+ gprintf "*** Dropping you to a shell; the system will reboot\n"
+ gprintf "*** when you leave the shell.\n"
- str=$"(Repair filesystem)"
+ str=`gprintf "(Repair filesystem)"`
PS1="$str \# # "; export PS1
[ "$SELINUX_STATE" = "1" ] && disable_selinux
sulogin
- echo $"Unmounting file systems"
+ gprintf "Unmounting file systems\n"
umount -a
mount -n -o remount,ro /
- echo $"Automatic reboot in progress."
+ gprintf "Automatic reboot in progress.\n"
reboot -f
- elif [ "$rc" -eq "1" ]; then
- _RUN_QUOTACHECK=1
+ else
+ echo_failure
+ echo
+ gprintf "*** A non fatal error occurred during the file system check.\n"
fi
-fi
+}
remount_needed() {
local state oldifs
@@ -461,23 +641,53 @@ remount_needed() {
return 0
}
+if [ "x$SPEEDBOOT" = "xyes" ]; then
+ wait $UDEV_DISK_PID
+fi
+# do not check / if already rw (for example with unionfs)
+if [ -z "$fastboot" -a "$READONLY" != "yes" ] && remount_needed; then
+ gprintf "Checking root filesystem\n"
+ Fsck -T -a $fsckoptions /
+fi
+_RUN_QUOTACHECK=0
+
# Remount the root filesystem read-write.
update_boot_stage RCmountfs
if remount_needed ; then
- action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
+ action "Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
+fi
+
+# wait for usb storage scanning processes to finish
+if ! strstr "$cmdline" nousb; then
+ LC_ALL=C grep '08' /sys/bus/usb/devices/*/bInterfaceClass >/dev/null 2>&1
+ RETVAL=$?
+ if [ $RETVAL -eq 0 ]; then
+ countdown=20
+ until [ -d /sys/module/usb_storage -o $countdown -eq 0 ]; do
+ usleep 100000; let countdown=$countdown-1;
+ done
+ while ps -eocomm | grep -q usb-stor-scan; do
+ sleep 1;
+ done
+ fi
fi
+if [ "x$SPEEDBOOT" != "xyes" ]; then
# Clean up SELinux labels
if [ -n "$SELINUX_STATE" ]; then
restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
+ SPEEDBOOT="DISABLED reason: SELinux"
fi
+[ -x /sbin/hibernate-cleanup.sh ] && /sbin/hibernate-cleanup.sh start
+
# If relabeling, relabel mount points.
if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1
fi
fi
+fi
if [ "$READONLY" != "yes" ] ; then
# Clear mtab
@@ -494,25 +704,109 @@ if [ "$READONLY" != "yes" ] ; then
mount -f /dev/shm >/dev/null 2>&1
mount -f /proc/bus/usb >/dev/null 2>&1
fi
+# (pixel) also added /initrd/loopfs for loopback root
+mount -f /initrd/loopfs 2>/dev/null
-# Mount all other filesystems (except for NFS and /proc, which is already
+if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then
+ # check for arguments passed from kernel
+ if ! strstr "$cmdline" nopnp ; then
+ PNP=yes
+ fi
+ if [ -n "$PNP" ]; then
+ action "Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf
+ else
+ action "Skipping ISA PNP configuration at users request: " /bin/true
+ fi
+fi
+
+# tweak isapnp settings if needed.
+if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then
+ /sbin/sndconfig --mungepnp >/dev/null 2>&1
+fi
+
+# Check filesystems
+# (pixel) do not check loopback files, will be done later (aren't available yet)
+if [ -z "$fastboot" ]; then
+ gprintf "Checking filesystems\n"
+ Fsck -T -R -A -a -t noopts=loop $fsckoptions
+fi
+
+# Mount all other filesystems (except for network bases filesystems and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
+# (pixel) also do not mount loopback and encrypted filesystems
+# will be done later
+(
+# export locales (needed by mount.ntfs-3g)
+export LC_ALL
+export LANG
if [ "$READONLY" != "yes" ] ; then
- action $"Mounting local filesystems: " mount -a -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
+ action "Mounting local filesystems: " mount -a -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
else
- action $"Mounting local filesystems: " mount -a -n -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev
+ action "Mounting local filesystems: " mount -a -n -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted
+fi
+)
+
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+[[ -z $AUTOFSCK_CRYPTO_TIMEOUT ]] && AUTOFSCK_CRYPTO_TIMEOUT=15
+
+#Mounting Encrypted filesystem
+encrypted_swap=
+if [[ ! -f /fastboot ]];then
+ encrypted=
+ while read -a entry;do
+ device=${entry[0]}
+ mountpoint=${entry[1]}
+ options=${entry[3]}
+ type=${entry[2]}
+ if [[ $options == *encryption=* || $options == *encrypted* ]];then
+ [[ $options == *noauto* ]] && continue
+ if [[ $type == *swap* ]];then
+ encrypted_swap="$encrypted_swap $device"
+ continue
+ fi
+ encrypted="$encrypted $mountpoint"
+ fi
+ done < /etc/fstab
+ if [[ -n $encrypted ]];then
+ modprobe cryptoloop
+ rc_splash verbose
+ echo "We have discovered Encrypted filesystems, do you want to mount them now ?"
+ MSG=`gprintf "Press Y within %%d seconds to mount your encrypted filesystems..."`
+ KEYS=`gprintf "yY"`
+ if /sbin/getkey -c $AUTOFSCK_CRYPTO_TIMEOUT -m "$MSG" "$KEYS"; then
+ echo -e '\n'
+ for i in ${encrypted};do
+ echo -n "${i} "; mount ${i}
+ done
+ else
+ echo -e '\n'
+ fi
+ fi
fi
+# (pixel) Check loopback filesystems
+if [ ! -f /fastboot ]; then
+ modprobe loop
+ gprintf "Checking loopback filesystems"
+ Fsck -T -R -A -a -t opts=loop $fsckoptions
+fi
+
+fi #SPEEDBOOT
+
+# Mount loopback
+action "Mounting loopback filesystems: " mount -a -O loop
+
# Update quotas if necessary
if [ X"$_RUN_QUOTACHECK" = X1 ] && [ -x /sbin/quotacheck ]; then
- action $"Checking local filesystem quotas: " /sbin/quotacheck -anug
+ action "Checking local filesystem quotas: " /sbin/quotacheck -anug
fi
if [ -x /sbin/quotaon ]; then
- action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
+ action "Turning on user and group quotas for local filesystems: " /sbin/quotaon -aug
fi
+if [ "x$SPEEDBOOT" != "xyes" ]; then
# Check to see if a full relabel is needed
if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
if strstr "$cmdline" autorelabel || [ -f /.autorelabel ] ; then
@@ -523,6 +817,7 @@ else
[ -f /.autorelabel ] || touch /.autorelabel
fi
fi
+fi #SPEEDBOOT
# Initialize pseudo-random number generator
if [ -f "/var/lib/random-seed" ]; then
@@ -534,9 +829,10 @@ if [ "$READONLY" != "yes" ]; then
chmod 600 /var/lib/random-seed
dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
fi
-
+if [ "x$SPEEDBOOT" != "xyes" ]; then
if [ -f /etc/crypttab ]; then
init_crypto 1
+ SPEEDBOOT="DISABLED reason: crypto FS"
fi
# Configure machine if necessary.
@@ -570,15 +866,21 @@ if [ -f /.unconfigured ]; then
. /etc/sysconfig/network
# Reset the hostname.
- action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
+ action "Resetting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME}
+
+ # Reset the NIS domain name.
+ if [ -n "$NISDOMAIN" ]; then
+ action "Resetting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN
+ fi
fi
rm -f /.unconfigured
fi
+fi
# Clean out /.
rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
- /poweroff /.suspended &> /dev/null
+ /poweroff /.suspended /etc/killpower &> /dev/null
# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
_NEED_XFILES=
@@ -586,10 +888,15 @@ _NEED_XFILES=
# Clean up /var.
rm -rf /var/lock/cvs/* /var/run/screen/*
-find /var/lock /var/run ! -type d -exec rm -f {} \;
-rm -f /var/lib/rpm/__db* &> /dev/null
-rm -f /var/gdm/.gdmfifo &> /dev/null
+find /var/lock /var/run ! -type d ! -path '/var/lock/TMP_1ST' -exec rm -f {} \;
+if [ "x$SPEEDBOOT" = "xyes" ]; then
+ wait $MODULES_PID
+ wait $UDEV_PID
+ /etc/rc.d/rc S &
+ RC_PID=$!
+fi
+{
# Clean up utmp/wtmp
> /var/run/utmp
touch /var/log/wtmp /var/log/btmp
@@ -606,11 +913,12 @@ fi
# Clean up various /tmp bits
[ -n "$SELINUX_STATE" ] && restorecon /tmp
-rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
+rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.s.PGSQL.*
rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
/tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
- /tmp/scrollkeeper-* /tmp/ssh-* \
- /dev/.in_sysinit
+ /tmp/ssh-* /tmp/.fam_socket /tmp/.esd /tmp/.esd-* \
+ /tmp/pulse-* /tmp/.sawfish-* /tmp/esrv* /tmp/kio* \
+ /var/lib/gdm/core.*
# Make ICE directory
mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
@@ -619,7 +927,7 @@ chown root:root /tmp/.ICE-unix
# Start up swapping.
update_boot_stage RCswap
-action $"Enabling /etc/fstab swaps: " swapon -a -e
+action "Enabling /etc/fstab swaps: " swapon -a -e 2>/dev/null
if [ "$AUTOSWAP" = "yes" ]; then
curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
swappartitions=$(blkid -t TYPE=swap -o device)
@@ -627,7 +935,7 @@ if [ "$AUTOSWAP" = "yes" ]; then
for partition in $swappartitions ; do
[ ! -e $partition ] && continue
majmin=$(get_numeric_dev dec $partition)
- echo $curswap | grep -qw "$majmin" || action $"Enabling local swap partitions: " swapon $partition
+ echo $curswap | grep -qw "$majmin" || action "Enabling local swap partitions: " swapon $partition
done
fi
fi
@@ -646,20 +954,221 @@ if [ -x /usr/sbin/system-config-network-cmd ]; then
fi
fi
+(
+# Now turn on swap in case we swap to files.
+action "Enabling swap space: " swapon -a -e
+
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+# If a SCSI tape has been detected, load the st module unconditionally
+# since many SCSI tapes don't deal well with st being loaded and unloaded
+if [ -n "$USEMODULES" -a -f /proc/scsi/scsi ] && LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then
+ LC_ALL=C fgrep -q ' 9 st' /proc/devices || modprobe st >/dev/null 2>&1
+ SPEEDBOOT="DISABLED reason: SCSI tape"
+fi
+fi #SPEEDBOOT
+
+(
+# Turn on harddisk optimization
+# There is only one file /etc/sysconfig/harddisks for all disks
+# after installing the hdparm-RPM. If you need different hdparm parameters
+# for each of your disks, copy /etc/sysconfig/harddisks to
+# /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it.
+# Each disk which has no special parameters will use the defaults.
+# Each non-disk which has no special parameters will be ignored.
+#
+
+disk[0]=s;
+disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd;
+disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh;
+disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl;
+disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp;
+disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt;
+disk[21]=sda; disk[22]=sdb; disk[23]=sdc; disk[24]=sdd;
+disk[25]=sde; disk[26]=sdf; disk[27]=sdg; disk[28]=sdh;
+disk[29]=sr0; disk[30]=sr1; disk[31]=sr2; disk[32]=sr3;
+disk[33]=scd0; disk[34]=scd1; disk[35]=scd2; disk[36]=scd3;
+disk[37]=sg0; disk[38]=sg1; disk[39]=sg2; disk[40]=sg3;
+
+
+# Skip hard disks optimization if software RAID arrays are currently
+# resyncing and disks heavily active, because hdparm might hang and
+# lock system startup in such situation
+
+if [ ! -f /proc/mdstat ] || ! /bin/egrep -qi "re(cover|sync)|syncing" /proc/mdstat; then
+ if [ -x /sbin/hdparm ]; then
+ for device in {0..40}; do
+ unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS
+ if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then
+ . /etc/sysconfig/harddisk${disk[$device]}
+ HDFLAGS[$device]=
+ if [ -n "$MULTIPLE_IO" ]; then
+ HDFLAGS[$device]="-q -m$MULTIPLE_IO"
+ fi
+ if [ -n "$USE_DMA" ]; then
+ HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA"
+ fi
+ if [ -n "$EIDE_32BIT" ]; then
+ HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT"
+ fi
+ if [ -n "$LOOKAHEAD" ]; then
+ HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD"
+ fi
+ if [ -n "$EXTRA_PARAMS" ]; then
+ HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS"
+ fi
+ else
+ HDFLAGS[$device]="${HDFLAGS[0]}"
+ fi
+ if [ -e "/proc/ide/${disk[$device]}/media" -o -e "/sys/block/${disk[$device]}/device/vendor" ]; then
+ if [ -e "/proc/ide/${disk[$device]}/media" ]; then
+ hdmedia=`cat /proc/ide/${disk[$device]}/media`
+ else
+ hdmedia=`cat /sys/block/${disk[$device]}/device/vendor`
+ fi
+ if [ "$hdmedia" = "disk" -o "$vendor" = "ATA" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then
+ if [ -n "${HDFLAGS[$device]}" ]; then
+ sleep 2
+ action "Setting hard drive parameters for %s: " ${disk[$device]} /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]}
+ fi
+ fi
+ fi
+ done
+ fi
+else
+ action "RAID Arrays are resyncing. Skipping hard drive parameters section." /bin/true
+fi
+) &
+
+
+# Adjust symlinks as necessary in /boot to keep system services from
+# spewing messages about mismatched System maps and so on.
+if [ -L /boot/System.map -a -r /boot/System.map-$uname_r -a \
+ ! /boot/System.map -ef /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
+fi
+if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then
+ ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null
+fi
+
+# Adjust symlinks as necessary in /boot to have the default config
+if [ -L /boot/config -a -r /boot/config-$uname_r ] ; then
+ ln -sf config-$uname_r /boot/config 2>/dev/null
+fi
+if [ ! -e /boot/config -a -r /boot/config-$uname_r ] ; then
+ ln -sf config-$uname_r /boot/config 2>/dev/null
+fi
+
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
[ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old
dmesg -s 131072 > /var/log/dmesg
+) &
# create the crash indicator flag to warn on crashes, offer fsck with timeout
touch /.autofsck &> /dev/null
+if [ "$PROMPT" != no ]; then
+ while :; do
+ pid=$(/sbin/pidof getkey)
+ [ -n "$pid" -o -e /var/run/getkey_done ] && break
+ usleep 100000
+ done
+ [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
+fi
+} &
if strstr "$cmdline" confirm ; then
touch /var/run/confirm
fi
+if [ "x$SPEEDBOOT" != "xyes" ]; then
+if [ "$PROMPT" != "no" ]; then
+ /sbin/getkey i && touch /var/run/confirm
+ touch /var/run/getkey_done
+fi
+wait
+[ "$PROMPT" != no ] && rm -f /var/run/getkey_done
+fi
+
+if strstr "$cmdline" failsafe; then
+ touch /var/run/failsafe
+fi
+
+if [ -f /var/lock/TMP_1ST ];then
+ if [ -f /etc/init.d/mandrake_firstime ];then
+ /bin/sh /etc/init.d/mandrake_firstime
+ fi
+fi
+
+if [ "x$SPEEDBOOT" = "xyes" ]; then
+ if [ ! -f /.readahead_collect -a -x /sbin/readahead_later ]; then
+ /sbin/readahead_later > /dev/null 2>&1
+ fi
+ wait $RC_PID
+ countdown=10
+ until [ -e /tmp/.X11-unix/X0 -o $countdown -eq 0 ]; do
+ sleep 1; let countdown=$countdown-1;
+ done
+
+
+
+ /sbin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=block --subsystem-nomatch=mem --subsystem-nomatch=input --subsystem-nomatch=acpi --subsystem-nomatch=rtc --subsystem-nomatch=hid
+ /sbin/udevadm settle --timeout=5 > /dev/null 2>&1
+ /sbin/udevadm control --env=STARTUP=
+ mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb
+
+ # (anssi) at this point plymouth should have quit, reopen descriptors to
+ # ensure that the output of the rest of this script is seen if the user is
+ # not in X11
+ exec 0<>/proc/self/fd/0 1<>/proc/self/fd/1 2<>/proc/self/fd/2
+fi
+
+if [ -f /etc/init.d/mandrake_everytime ]; then
+ /bin/sh /etc/init.d/mandrake_everytime
+fi
+
+if [ "x$SPEEDBOOT_PROBE" = "xyes" ]; then
+ sed -i -e "/$uname_r .*/d" /var/lib/speedboot/status 2>/dev/null
+ unset SPEEDBOOT_PROBE
+fi
+
+if [ "x$SPEEDBOOT" = "xyes" -a ! -e /tmp/.X11-unix/X0 ]; then
+ /etc/init.d/dm stop
+ grep -q "$uname_r" /var/lib/speedboot/status 2> /dev/null
+ RETVAL=$?
+ if [ $RETVAL -eq 0 ]; then
+ sed -i -e "s/^$uname_r FAILED (first time)/$uname_r FAILED/g" -e "/FAILED/!s/^$uname_r .*/$uname_r FAILED (first time)/g" /var/lib/speedboot/status
+ else
+ echo "$uname_r FAILED (first time)" >> /var/lib/speedboot/status
+ fi
+fi
+
+# system configuration doesn't permit speedboot or speedboot failed, disable it
+if strstr "$SPEEDBOOT" DISABLED ; then
+ grep -q $uname_r /var/lib/speedboot/status 2> /dev/null
+ RETVAL=$?
+ if [ $RETVAL -eq 0 ]; then
+ sed -i -e "s/^$uname_r .*/$uname_r $SPEEDBOOT/g" /var/lib/speedboot/status
+ else
+ echo "$uname_r $SPEEDBOOT" >> /var/lib/speedboot/status
+ fi
+fi
+
+unset SPEEDBOOT
+
+# (pixel) a kind of profile for XF86Config
+# if no XFree=XXX given on kernel command-line, restore XF86Config.standard
+for i in XF86Config XF86Config-4; do
+ if [ -L "/etc/X11/$i" ]; then
+ XFree=`sed -n 's/.*XFree=\(\w*\).*/\1/p' /proc/cmdline`
+ [ -n "$XFree" ] || XFree=standard
+ [ -r "/etc/X11/$i.$XFree" ] && ln -sf "$i.$XFree" "/etc/X11/$i"
+ fi
+done
# Let rhgb know that we're leaving rc.sysinit
if [ -x /usr/bin/plymouth ]; then
/usr/bin/plymouth --sysinit
fi
+# remove this file at the very end, for speedboot
+rm -f /dev/.in_sysinit
+
generated by cgit v1.2.1 (git 2.21.0) at 2024-07-19 01:11:05 +0000