aboutsummaryrefslogtreecommitdiffstats
path: root/ppp
diff options
context:
space:
mode:
Diffstat (limited to 'ppp')
-rw-r--r--ppp/ip-down.ipv6to46
-rw-r--r--ppp/ip-up.ipv6to428
-rw-r--r--ppp/ipv6-down8
-rw-r--r--ppp/ipv6-up43
4 files changed, 42 insertions, 43 deletions
diff --git a/ppp/ip-down.ipv6to4 b/ppp/ip-down.ipv6to4
index 268ff5d0..fa640d7a 100644
--- a/ppp/ip-down.ipv6to4
+++ b/ppp/ip-down.ipv6to4
@@ -9,7 +9,7 @@
# You will find more information in the IPv6-HowTo for Linux at
# http://www.bieringer.de/linux/IPv6/
#
-# Version 2002-01-25
+# Version 2002-10-30
#
# Calling parameters:
# $1: interface name
@@ -30,7 +30,7 @@
#
# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering
# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid"
-# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
+# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
#
@@ -105,7 +105,7 @@ if [ "$valid6to4config" = "yes" ]; then
ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
fi
- if [ ! -z "$IPV6TO4_ROUTING" ]; then
+ if [ -n "$IPV6TO4_ROUTING" ]; then
# Delete routes to local networks
for devsuf in $IPV6TO4_ROUTING; do
dev="`echo $devsuf | awk -F- '{ print $1 }'`"
diff --git a/ppp/ip-up.ipv6to4 b/ppp/ip-up.ipv6to4
index 79d99c03..da0ba48e 100644
--- a/ppp/ip-up.ipv6to4
+++ b/ppp/ip-up.ipv6to4
@@ -9,7 +9,7 @@
# You will find more information in the IPv6-HowTo for Linux at
# http://www.bieringer.de/linux/IPv6/
#
-# Version 2002-01-25
+# Version 2002-11-02
#
# Calling parameters:
# $1: interface name
@@ -26,13 +26,13 @@
# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
# IPV6TO4INIT=yes|no: controls configuration
# IPV6TO4_IPV4ADDR=<IPv4 address>: special local address for 6to4 tunneling (only needed behind a NAT gateway)
-# IPV6TO4_RELAY=<IPv4 address>: remote 6to4 relay router address [default: 192.88.99.1]
+# IPV6TO4_RELAY=<IPv4 address>: remote 6to4 relay router address (default: 192.88.99.1)
# IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup local subnetting
# Example: IPV6TO4_ROUTING="eth0-:f101::0/64 eth1-:f102::0/64"
#
# IPV6_CONTROL_RADVD=yes|no: controls radvd triggering
# IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid"
-# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
+# IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd (optional, default is SIGHUP)
#
# Requirements
# radvd-0.6.2p3 or newer supporting option "Base6to4Interface"
@@ -75,25 +75,25 @@ ipv6_test || exit 1
# Setup of 6to4, if configured
valid6to4config="yes"
if [ "$IPV6TO4INIT" = "yes" ]; then
- if [ ! -z "$IPV6TO4_IPV4ADDR" ]; then
- # Take special configured from config file (precedence 1)
+ if [ -n "$IPV6TO4_IPV4ADDR" ]; then
+ # Take 6to4-dedicated configured IPv4 address from config file (precedence 1)
ipv4addr="$IPV6TO4_IPV4ADDR"
else
- # Get IPv4 address from interface first (has precedence 2)
- ipv4addr="`LC_ALL=C ifconfig $DEVICE |grep "inet addr:" | tr : " " | awk '{ print $3 }'`"
+ # Get IPv4 address from interface (precedence 2)
+ ipv4addr="`ipv6_get_ipv4addr_of_device $DEVICE`"
if [ -z "$ipv4addr" ]; then
- # Take configured from config file (precedence 3)
+ # Take configured IPv4 address of interface from config file (precedence 3)
ipv4addr="$IPADDR"
fi
fi
- if [ ! -z "$ipv4addr" ]; then
+ if [ -n "$ipv4addr" ]; then
# Test for non-global IPv4 address
if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then
- echo $"Given IPv4 address '$ipv4addr' is not globally usable, 6to4 configuration is not valid"
+ echo $"Given IPv4 address '$ipv4addr' is not globally usable"
valid6to4config="no"
fi
else
- echo $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified, 6to4 configuration is not valid"
+ echo $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified"
valid6to4config="no"
fi
if [ -z "$IPV6TO4_RELAY" ]; then
@@ -124,7 +124,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
# Add default route, if device matches
if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then
- if [ ! -z "$IPV6_DEFAULTGW" ]; then
+ if [ -n "$IPV6_DEFAULTGW" ]; then
echo $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
fi
ipv6_set_default_route $ipv6to4_relay tun6to4
@@ -151,10 +151,10 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
# Control running radvd
ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
- if [ ! -z "$IPV6TO4_ROUTING" ]; then
+ if [ -n "$IPV6TO4_ROUTING" ]; then
# Generate 6to4 address
ipv6to4prefix="`ipv6_create_6to4_prefix $ipv4addr`"
- if [ ! -z "$ipv6to4prefix" ]; then
+ if [ -n "$ipv6to4prefix" ]; then
# Add route to local networks
for devsuf in $IPV6TO4_ROUTING; do
dev="`echo $devsuf | awk -F- '{ print $1 }'`"
diff --git a/ppp/ipv6-down b/ppp/ipv6-down
index 1261537b..1798a3d7 100644
--- a/ppp/ipv6-down
+++ b/ppp/ipv6-down
@@ -2,14 +2,14 @@
# This file should not be modified -- make local changes to
# /etc/ppp/ipv6-down.local instead
+# Version: 2002-10-30
+
PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH
LOGDEVICE=$6
REALDEVICE=$1
-[ -x /etc/ppp/ipv6-up.local ] && /etc/ppp/ipv6-up.local "$@"
-
[ -x /etc/sysconfig/network-scripts/ifdown-ipv6 ] || exit 0
[ -f /etc/sysconfig/network ] || exit 0
. /etc/sysconfig/network
@@ -17,12 +17,14 @@ REALDEVICE=$1
cd /etc/sysconfig/network-scripts
. network-functions
-. /etc/sysconfig/network-scripts/network-functions-ipv6
+. network-functions-ipv6
CONFIG=$1
[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
source_config
+[ -x /etc/ppp/ipv6-down.local ] && /etc/ppp/ipv6-down.local "$@"
+
/etc/sysconfig/network-scripts/ifdown-ipv6 $REALDEVICE
if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
diff --git a/ppp/ipv6-up b/ppp/ipv6-up
index ebc454c9..6f1f0463 100644
--- a/ppp/ipv6-up
+++ b/ppp/ipv6-up
@@ -2,35 +2,32 @@
# This file should not be modified -- make local changes to
# /etc/ppp/ipv6-up.local instead
+# Version: 2002-10-30
+
PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH
LOGDEVICE=$6
REALDEVICE=$1
-# Setup IPv6
-if [ -f /etc/sysconfig/network ]; then
- . /etc/sysconfig/network
-
- if [ "${NETWORKING_IPV6}" = "yes" -a -x /etc/sysconfig/network-scripts/ifup-ipv6 ]; then
- # Source IPv4 helper functions
- cd /etc/sysconfig/network-scripts
- . network-functions
-
- # Source IPv6 helper functions
- . /etc/sysconfig/network-scripts/network-functions-ipv6
-
- CONFIG=$1
- [ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
- source_config
-
- /etc/sysconfig/network-scripts/ifup-ipv6 $REALDEVICE
-
- if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
- # Control running radvd
- ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
- fi
- fi
+[ -x /etc/sysconfig/network-scripts/ifup-ipv6 ] || exit 0
+[ -f /etc/sysconfig/network ] || exit 0
+. /etc/sysconfig/network
+[ "${NETWORKING_IPV6}" = "yes" ] || exit 0
+
+cd /etc/sysconfig/network-scripts
+. network-functions
+. network-functions-ipv6
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+/etc/sysconfig/network-scripts/ifup-ipv6 $REALDEVICE
+
+if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
+ # Control running radvd
+ ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
fi
[ -x /etc/ppp/ipv6-up.local ] && /etc/ppp/ipv6-up.local "$@"