Add the mdkconf patch

25 files changed, 545 insertions, 586 deletions

diff --git a/sysconfig/init b/sysconfig/init
index 6c3f1238..cf2eb896 100644
--- a/sysconfig/init
+++ b/sysconfig/init
@@ -3,18 +3,22 @@
 # anything else => new style bootup without ANSI colors or positioning
 BOOTUP=color
 # column to start "[  OK  ]" label in 
-RES_COL=60
+RES_COL=$((COLUMNS - 15))
 # terminal sequence to move to that column. You could change this
 # to something like "tput hpa ${RES_COL}" if your terminal supports it
 MOVE_TO_COL="echo -en \\033[${RES_COL}G"
 # terminal sequence to set color to a 'success' color (currently: green)
-SETCOLOR_SUCCESS="echo -en \\033[0;32m"
+SETCOLOR_SUCCESS="echo -en \\033[1;32m"
 # terminal sequence to set color to a 'failure' color (currently: red)
-SETCOLOR_FAILURE="echo -en \\033[0;31m"
+SETCOLOR_FAILURE="echo -en \\033[1;31m"
 # terminal sequence to set color to a 'warning' color (currently: yellow)
-SETCOLOR_WARNING="echo -en \\033[0;33m"
+SETCOLOR_WARNING="echo -en \\033[1;33m"
 # terminal sequence to reset to the default color.
 SETCOLOR_NORMAL="echo -en \\033[0;39m"
+# default kernel loglevel on boot (syslog will reset this)
+LOGLEVEL=3
+# Set to anything other than 'no' to allow hotkey interactive startup...
+PROMPT=yes
 # Set to 'yes' to allow probing for devices with swap signatures
 AUTOSWAP=no
 # What ttys should gettys be started on?
diff --git a/sysconfig/init.s390 b/sysconfig/init.s390
index fdacee05..802732da 100644
--- a/sysconfig/init.s390
+++ b/sysconfig/init.s390
@@ -3,7 +3,7 @@
 # anything else => new style bootup without ANSI colors or positioning
 BOOTUP=serial
 # column to start "[  OK  ]" label in 
-RES_COL=60
+RES_COL=65
 # terminal sequence to move to that column. You could change this
 # to something like "tput hpa ${RES_COL}" if your terminal supports it
 MOVE_TO_COL=
diff --git a/sysconfig/network-scripts/ifcfg-lo b/sysconfig/network-scripts/ifcfg-lo
index cb4f3f94..cb4f3f94 100644..100755
--- a/sysconfig/network-scripts/ifcfg-lo
+++ b/sysconfig/network-scripts/ifcfg-lo
diff --git a/sysconfig/network-scripts/ifdown b/sysconfig/network-scripts/ifdown
index db045da4..57e56e3f 100755
--- a/sysconfig/network-scripts/ifdown
+++ b/sysconfig/network-scripts/ifdown
@@ -7,7 +7,7 @@ unset WINDOW # defined by screen, conflicts with our usage
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=$1
 
@@ -42,13 +42,8 @@ then
 fi
 
 if [ "$USE_NM" = "true" ]; then
-    if [ -n "$UUID" -a -z "$DEVICE" ]; then
-	DEVICE=$(nmcli -t --fields uuid,devices con status | awk -F ':' "\$1 == \"$UUID\" { print \$2 }")
-    fi
-    if [ -n "$DEVICE" ] && ! is_nm_device_unmanaged "$DEVICE" ; then
-	nmcli dev disconnect iface "$DEVICE"
-	exit $?
-    fi
+    echo $"$0: interface ${1} is controlled by NetworkManager; skipping." >&2
+    exit 0
 fi
 
 if [ -x /sbin/ifdown-pre-local ]; then
diff --git a/sysconfig/network-scripts/ifdown-bnep b/sysconfig/network-scripts/ifdown-bnep
index b8064fd8..b7749adf 100755
--- a/sysconfig/network-scripts/ifdown-bnep
+++ b/sysconfig/network-scripts/ifdown-bnep
@@ -5,7 +5,7 @@
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=${1}
 
diff --git a/sysconfig/network-scripts/ifdown-eth b/sysconfig/network-scripts/ifdown-eth
index 530975c3..711d3284 100755
--- a/sysconfig/network-scripts/ifdown-eth
+++ b/sysconfig/network-scripts/ifdown-eth
@@ -20,9 +20,12 @@
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=${1}
+boot=$2
+daemon=
+[ "foo${boot}" = "fooboot" -o "foo${boot}" = "foodaemon" ] && daemon=1
 
 source_config
 
@@ -63,27 +66,35 @@ if is_bonding_device ${DEVICE} ; then
 fi
 
 /etc/sysconfig/network-scripts/ifdown-ipv6 ${CONFIG}
+if [[ "${DHCPV6C}" = [Yy1]* ]] && [ -f /var/run/dhcp6c_${DEVICE}.pid ]; then
+	kill $(cat /var/run/dhcp6c_${DEVICE}.pid);
+	rm -f /var/run/dhcp6c_${DEVICE}.pid;
+fi
+
+# Kill running dhcp client if present
+dhcp_client_pids() {
+    CLIENTS='dhcpcd|pump|dhcpxd|dhclient|zcip'
+    [ -n "${daemon}" -o "$MII_NOT_SUPPORTED" = "yes" ] && CLIENTS="${CLIENTS}|wpa_supplicant"
+    ps xw | egrep "${CLIENTS}" | grep ${DEVICE} | awk '{print $1;}'
+}
+
+if [ -n "${daemon}" -a "$MII_NOT_SUPPORTED" != "yes" ]; then
+    # use ifplugd -k -W to wait for it to be killed
+    /sbin/ifplugd -k -W -i ${DEVICE}
+fi
 
 retcode=0
-[ -n "$(pidof -x dhclient)" ] && {
-   for VER in "" 6 ; do
-	if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then
-		dhcpid=$(cat /var/run/dhclient$VER-${DEVICE}.pid)
-		if [[ "$DHCPRELEASE" = [yY1]* ]];  then
-			/sbin/dhclient -r -lf /var/lib/dhclient/dhclient$VER-${DEVICE}.leases -pf /var/run/dhclient-${DEVICE}.pid ${DEVICE} >/dev/null 2>&1
-			retcode=$?
-		else
-			kill $dhcpid >/dev/null 2>&1
-			retcode=$?
-			reason=STOP$VER interface=${DEVICE} /sbin/dhclient-script
-		fi
-		if [ -f "/var/run/dhclient$VER-${DEVICE}.pid" ]; then
-			rm -f /var/run/dhclient$VER-${DEVICE}.pid
-			kill $dhcpid >/dev/null 2>&1
-		fi	
-	fi
+pids=`dhcp_client_pids`
+if [ -n "$pids" ]; then
+    kill $pids
+    retcode=$?
+    waited=0
+    while ! dhcp_client_pids > /dev/null && [ "$waited" -lt 50 ] ; do
+	usleep 10000
+	waited=$(($waited+1))
     done
-}	
+fi
+
 # we can't just delete the configured address because that address
 # may have been changed in the config file since the device was
 # brought up.  Flush all addresses associated with this
@@ -99,6 +110,11 @@ if [ -d "/sys/class/net/${REALDEVICE}" ]; then
 		echo "-${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
 	fi
 
+	# Remove ip addresses from kernel
+	for ip in `ip addr show | egrep ${DEVICE}\$ | grep inet | awk '{print $2;}'`; do
+		ip addr del $ip dev ${DEVICE}
+	done
+
 	if [ "${REALDEVICE}" = "${DEVICE}" ]; then
   		ip link set dev ${DEVICE} down 2>/dev/null
 	fi
@@ -128,7 +144,7 @@ while ! check_device_down ${DEVICE} && [ "$waited" -lt 50 ] ; do
 done
 
 # don't leave an outdated key sitting around
-if [ -n "${WIRELESS_ENC_KEY}" ] && [ -x /sbin/iwconfig ]; then
+if [ -z "$IN_HOTPLUG" -a -n "${WIRELESS_ENC_KEY}" -a -x /sbin/iwconfig ]; then
     /sbin/iwconfig ${DEVICE} enc 0 >/dev/null 2>&1
 fi
 
diff --git a/sysconfig/network-scripts/ifdown-ippp b/sysconfig/network-scripts/ifdown-ippp
deleted file mode 100755
index f6fe5f12..00000000
--- a/sysconfig/network-scripts/ifdown-ippp
+++ /dev/null
@@ -1,34 +0,0 @@
-#! /bin/sh
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin 
-
-# Get global network configuration
-[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
-
-CONFIG=$1
-
-. ./$CONFIG
-
-# stopping ibod daemon for channel bundling
-if [ -f /var/lock/subsys/ibod ] ; then
-    kill -9  $(pidof ibod) >/dev/null 2>&1
-    rm -f /var/lock/subsys/ibod
-fi
-
-# Shut down IPv6
-/etc/sysconfig/network-scripts/ifdown-ipv6 $CONFIG
-
-# shutdown isdn device
-isdnctrl hangup $DEVICE >/dev/null 2>&1
-sleep 1
-ip link set dev $DEVICE down >/dev/null 2>&1
-
-# delete isdn device
-isdnctrl delif $DEVICE >/dev/null 2>&1
-
-# kill ipppd daemon
-if [ -f /var/run/ipppd.$DEVICE.pid ] ; then
-    pppdpid=$(cat /var/run/ipppd.$DEVICE.pid)
-    kill -9 $pppdpid > /dev/null 2>&1
-    rm -f /var/run/ipppd.$DEVICE.pid > /dev/null 2>&1
-fi
diff --git a/sysconfig/network-scripts/ifdown-ipv6 b/sysconfig/network-scripts/ifdown-ipv6
index 9f04531a..9f04531a 100755..100644
--- a/sysconfig/network-scripts/ifdown-ipv6
+++ b/sysconfig/network-scripts/ifdown-ipv6
diff --git a/sysconfig/network-scripts/ifdown-post b/sysconfig/network-scripts/ifdown-post
index 0a1b938a..98fe64cc 100755
--- a/sysconfig/network-scripts/ifdown-post
+++ b/sysconfig/network-scripts/ifdown-post
@@ -19,12 +19,9 @@ source_config
 /etc/sysconfig/network-scripts/ifdown-routes ${REALDEVICE} ${DEVNAME}
 
 if [ "$PEERDNS" != "no" -o -n "$RESOLV_MODS" -a "$RESOLV_MODS" != "no" ]; then
-    if [ -f /etc/resolv.conf.save ]; then
-	change_resolv_conf /etc/resolv.conf.save
-	rm -f /etc/resolv.conf.save
-    fi
+    clear_resolv_conf
     if [ "${DEVICETYPE}" = "ppp" -o "${DEVICETYPE}" = "ippp" ]; then
-        if [ -f /etc/ppp/peers/$DEVICE ] ; then
+        if [ -f /etc/ppp/peers/$DEVICE -a "$TYPE" != "ADSL" ] ; then
 	    rm -f /etc/ppp/peers/$DEVICE
         fi
     fi
@@ -49,6 +46,12 @@ fi
 # Notify programs that have requested notification
 do_netreport
 
+mdv-network-event interface_down ${DEVICE}
+
+if [ -d /etc/sysconfig/network-scripts/ifdown.d -a -x /usr/bin/run-parts ]; then
+    /usr/bin/run-parts --arg ${DEVICE} /etc/sysconfig/network-scripts/ifdown.d
+fi
+
 if [ -x /sbin/ifdown-local ]; then
     /sbin/ifdown-local ${DEVICE}
 fi
diff --git a/sysconfig/network-scripts/ifdown-ppp b/sysconfig/network-scripts/ifdown-ppp
index fca64638..99b1b09e 100755
--- a/sysconfig/network-scripts/ifdown-ppp
+++ b/sysconfig/network-scripts/ifdown-ppp
@@ -4,10 +4,11 @@ cd /etc/sysconfig/network-scripts
 . ./network-functions
 
 CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$1
 source_config
 
 if [ "$TYPE" = "xDSL" ] && [ -x /usr/sbin/adsl-stop ] ; then
-    adsl-stop /etc/sysconfig/network-scripts/$CONFIG
+    adsl-stop
     exit $?
 fi
 
@@ -25,7 +26,11 @@ if [ "${DEMAND}" = "yes" ] && [ -f /var/run/ppp-${CONFIG}.pid ] ; then
     exit 1
 fi
 
-file=/var/run/pppwatch-${DEVICE}.pid
+if [ "$TYPE" = "ADSL" ]; then
+    file=/var/run/${DEVICE}.pid
+else
+    file=/var/run/pppwatch-${DEVICE}.pid
+fi
 
 if [ ! -f $file ]; then
     # ppp isn't running, or we didn't start it
diff --git a/sysconfig/network-scripts/ifdown-sit b/sysconfig/network-scripts/ifdown-sit
index 041dc3cd..041dc3cd 100755..100644
--- a/sysconfig/network-scripts/ifdown-sit
+++ b/sysconfig/network-scripts/ifdown-sit
diff --git a/sysconfig/network-scripts/ifdown-tunnel b/sysconfig/network-scripts/ifdown-tunnel
index a1f643c7..a96aff4b 100755
--- a/sysconfig/network-scripts/ifdown-tunnel
+++ b/sysconfig/network-scripts/ifdown-tunnel
@@ -25,7 +25,7 @@
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=$1
 need_config "$CONFIG"
diff --git a/sysconfig/network-scripts/ifup b/sysconfig/network-scripts/ifup
index 1eaabab8..fb203f5a 100755
--- a/sysconfig/network-scripts/ifup
+++ b/sysconfig/network-scripts/ifup
@@ -15,6 +15,9 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+TEXTDOMAIN=initscripts
+
 unset WINDOW # defined by screen, conflicts with our usage
 
 . /etc/init.d/functions
@@ -22,7 +25,7 @@ unset WINDOW # defined by screen, conflicts with our usage
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=${1}
 
@@ -65,9 +68,9 @@ then
     exit 0
 fi
 
-if [ "$USE_NM" = "true" -a -n "$UUID" ]; then
-    nmcli con up uuid "$UUID"
-    exit $?
+if [ "$USE_NM" = "true" ]; then
+    echo $"$0: interface ${1} is controlled by NetworkManager; skipping." >&2
+    exit 0
 fi
 
 # Ethernet 802.1Q VLAN support
@@ -124,9 +127,8 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ]; then
     fi
 fi
 
-if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
-    DYNCONFIG=true
-fi
+# signalling the start of connection
+mdv-network-event connection_start ${DEVICE}
 
 if [ -x /sbin/ifup-pre-local ]; then
     /sbin/ifup-pre-local ${CONFIG} $2
diff --git a/sysconfig/network-scripts/ifup-bnep b/sysconfig/network-scripts/ifup-bnep
index 5aff2777..e80ccb6b 100755
--- a/sysconfig/network-scripts/ifup-bnep
+++ b/sysconfig/network-scripts/ifup-bnep
@@ -5,7 +5,7 @@
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=${1}
 
diff --git a/sysconfig/network-scripts/ifup-eth b/sysconfig/network-scripts/ifup-eth
index 9377494c..b1039176 100755
--- a/sysconfig/network-scripts/ifup-eth
+++ b/sysconfig/network-scripts/ifup-eth
@@ -15,21 +15,33 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+TEXTDOMAIN=initscripts
+
 . /etc/init.d/functions
 
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 CONFIG=${1}
+boot=${2}
+daemon=
+[ "foo${boot}" = "fooboot" -o "foo${boot}" = "foodaemon" ] && daemon=1
 
 need_config "${CONFIG}"
 
 source_config
 
+# Old BOOTP variable
+if [ "${BOOTP}" = "yes" ]; then
+    BOOTPROTO=bootp
+fi
+
 if [ "${BOOTPROTO}" = "bootp" -o "${BOOTPROTO}" = "dhcp" ]; then
     DYNCONFIG=true
+    [ "${BOOTPROTO}" = bootp ] && DHCP_CLIENT=/sbin/pump
 fi
 
 # load the module associated with that device
@@ -41,6 +53,7 @@ if [ -n "${HWADDR}" ]; then
     FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
     if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then
 	    echo $"Device ${DEVICE} has different MAC address than expected, ignoring."
+	    mdv-network-event connection_failure ${DEVICE}
 	    exit 1
     fi
 fi
@@ -49,6 +62,7 @@ fi
 if [ "${TYPE}" = "Bridge" ]; then
       if [ ! -x /usr/sbin/brctl ]; then
 	  echo $"Bridge support not available: brctl not found"
+	  mdv-network-event connection_failure ${DEVICE}
 	  exit 1
       fi
       if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then
@@ -60,12 +74,22 @@ fi
 
 # If the device is a tap device, create it with tunctl, if available.
 if [ "${TYPE}" = "Tap" ]; then
-      if [ ! -x /usr/sbin/tunctl ]; then
+      if [ ! -x /usr/sbin/tunctl -a ! -x /usr/bin/tunctl ]; then
           echo $"Tap support not available: tunctl not found"
+	  mdv-network-event connection_failure ${DEVICE}
           exit 1
       fi
+      # load the correct module if necessary (#54748)
+      if [ ! -c /dev/net/tun ]; then
+          if ! modprobe tun > /dev/null 2>&1; then
+               echo $"No TUN/TAP support available in kernel for device ${DEVICE}"
+               mdv-network-event connection_failure ${DEVICE}
+               exit 1
+          fi
+      fi
+
       [ -n "${OWNER}" ] && OWNER="-u ${OWNER}"
-      /usr/sbin/tunctl ${OWNER} -t ${DEVICE} > /dev/null
+      tunctl ${OWNER} -t ${DEVICE} > /dev/null
 fi
 
 # now check the real state
@@ -75,9 +99,67 @@ is_available ${REALDEVICE} || {
       else
          echo $"Device ${DEVICE} does not seem to be present, delaying initialization."
       fi
+      mdv-network-event connection_failure ${DEVICE}
       exit 1
 }
 
+# is the device wireless? If so, configure wireless device specifics
+IS_WIRELESS=
+# ralink devices need to be up for wireless-tools to work
+[ -d "/sys/class/net/${DEVICE}/wireless" ] && ip link set dev ${DEVICE} up
+if is_wireless_device ${DEVICE}; then
+    if [ -n "${daemon}" -o "$MII_NOT_SUPPORTED" = "yes" ]; then
+        # try to trigger association (and always load wireless settings)
+	WIRELESS_CONFIG="wireless.d/$WIRELESS_ESSID"
+	[ -f "$WIRELESS_CONFIG" ] && source "$WIRELESS_CONFIG"
+	. ./ifup-wireless
+        if [ -n "$WIRELESS_WPA_DRIVER" -a -x /usr/sbin/wpa_supplicant -a -f /etc/wpa_supplicant.conf ]; then
+            if wpa_cli -i${DEVICE} status &>/dev/null; then
+                echo "Another wpa_supplicant instance is already running for device $DEVICE"
+            else
+                /usr/sbin/wpa_supplicant -B -i ${DEVICE} \
+                    -c /etc/wpa_supplicant.conf  \
+                    -D ${WIRELESS_WPA_DRIVER}
+            fi
+            if [ "$WIRELESS_WPA_REASSOCIATE" = "yes" ]; then
+                sleep 2
+                wpa_cli reassociate
+            fi
+	fi
+    elif [ -n "$WIRELESS_WPA_DRIVER" ]; then
+        # roaming enabled, on association
+        # source interface parameters related to current ESSID or AP if any
+        WIRELESS_CURRENT_ESSID=`iwgetid -r ${DEVICE}`
+        if [ -n "$WIRELESS_CURRENT_ESSID" ]; then
+            WIRELESS_CONFIG="wireless.d/$WIRELESS_CURRENT_ESSID"
+            if [ ! -f "$WIRELESS_CONFIG" ]; then
+                WIRELESS_CURRENT_AP=`iwgetid -r -a ${DEVICE}`
+                WIRELESS_CONFIG="wireless.d/$WIRELESS_CURRENT_AP"
+            fi
+            if [ -f "$WIRELESS_CONFIG" ]; then
+                source "$WIRELESS_CONFIG"
+            else
+                echo "Wireless device $DEVICE is associated with $WIRELESS_CURRENT_ESSID but configuration is missing"
+            fi
+        else
+            echo "Wireless device $DEVICE is configured with a roaming daemon but isn't associated"
+        fi
+    fi
+    IS_WIRELESS=1
+fi
+
+# DVB Card
+if [ -n "${DVB_ADAPTER_ID}" -a -n "${DVB_NETWORK_DEMUX}" -a -n "${DVB_NETWORK_PID}" ]; then
+       dvbnet -a ${DVB_ADAPTER_ID} -n ${DVB_NETWORK_DEMUX} -p ${DVB_NETWORK_PID}
+fi
+
+# ATMARP protocol support, enabled if ATM_ADDR is defined (VCI.VPI)
+# useful for modems using the atm kernel module (e.g. Speedtouch)
+# and ISP using "RFC 1483 Routed VC MUX" (e.g. Free Degroupe)
+if [ -n "${ATM_ADDR}" -a -x /usr/sbin/atmarpd -a -x /usr/sbin/atmarp ]; then
+      pidof atmarpd >/dev/null 2>&1 || /usr/sbin/atmarpd -b -l syslog >/dev/null 2>&1
+      atmarp -c ${DEVICE} 2>/dev/null
+fi 
 
 # this isn't the same as the MAC in the configuration filename.  It is
 # available as a configuration option in the config file, forcing the kernel
@@ -89,9 +171,6 @@ if [ -n "${MTU}" ]; then
    ip link set dev ${DEVICE} mtu ${MTU}
 fi
 
-# is the device wireless? If so, configure wireless device specifics
-is_wireless_device ${DEVICE} && . ./ifup-wireless
-
 # slave device?
 if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
     grep -wq "${DEVICE}" /sys/class/net/${MASTER}/bonding/slaves || {
@@ -99,7 +178,7 @@ if [ "${SLAVE}" = yes -a "${ISALIAS}" = no -a "${MASTER}" != "" ]; then
 	echo "+${DEVICE}" > /sys/class/net/${MASTER}/bonding/slaves 2>/dev/null
     }
     if [ -n "$ETHTOOL_OPTS" ] ; then
-        /sbin/ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
+        ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
     fi
 
     exit 0
@@ -162,21 +241,115 @@ if [ -n "${BRIDGE}" ] && [ -x /usr/sbin/brctl ]; then
       exit 0
 fi
 		     
-if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then
-    if [[ "${PERSISTENT_DHCLIENT}" =  [yY1]* ]]; then
-       ONESHOT="";
+# exec ifplugd daemon at boot if supported
+if [ -n "${daemon}" -a "$MII_NOT_SUPPORTED" != "yes" ]; then
+    IFPLUGD_ARGS="${IFPLUGD_ARGS=-I -b}"
+    exec /sbin/ifplugd $IFPLUGD_ARGS -i $DEVICE
+fi
+
+
+BLURB="# temporary ifup addition"
+
+if [ -n "$DYNCONFIG" -a "XXX$DHCP_CLIENT" = "XXX" ];then
+    if [ -x /sbin/dhclient ];then
+	DHCP_CLIENT=/sbin/dhclient
+	# Remove any temporary references which were previously added to dhclient config
+	if [ -w /etc/dhclient-${DEVICE}.conf -a -x /sbin/dhclient ] ; then
+	    grep -v "$BLURB" /etc/dhclient-${DEVICE}.conf > /etc/dhclient-${DEVICE}.conf.ifupnew 2> /dev/null
+	    cat /etc/dhclient-${DEVICE}.conf.ifupnew > /etc/dhclient-${DEVICE}.conf
+	    rm -f /etc/dhclient-${DEVICE}.conf.ifupnew
+	fi
+    elif [ -x /sbin/dhcpcd ];then
+	DHCP_CLIENT=/sbin/dhcpcd
+    elif [ -x /sbin/pump ];then
+	DHCP_CLIENT=/sbin/pump
+    elif [ -x /sbin/dhcpxd ];then
+	DHCP_CLIENT=/sbin/dhcpxd
+    else 
+	echo $"Can't find a dhcp client"
+	mdv-network-event connection_failure ${DEVICE}
+	exit 1;
+    fi
+fi  
+
+if [ "$DHCP_HOSTNAME" ] && [ "$DOMAINNAME" ]
+then
+	DHCP_HOSTNAME=`echo $DHCP_HOSTNAME | sed -e "s/\.$DOMAINNAME//g"`
+fi
+
+DHCP_ARGS=
+if [ "XXX$DHCP_CLIENT" != "XXX" ];then
+case $(basename $DHCP_CLIENT) in
+    dhcpcd)
+    DHCP_ARGS="--waitip"
+    [ -n "${DHCP_HOSTNAME}" ] && DHCP_ARGS="${DHCP_ARGS} -h ${DHCP_HOSTNAME}"
+    [ "${PEERDNS}" = "no" ] && DHCP_ARGS="${DHCP_ARGS} -C resolv.conf"
+    [ "${PEERGATEWAY}" = "no" ] && DHCP_ARGS="${DHCP_ARGS} -G"
+    [ -n "${DHCP_TIMEOUT}" ] && DHCP_ARGS="${DHCP_ARGS} -t ${DHCP_TIMEOUT}"
+    [ "${NEEDHOSTNAME}" = "no" ] && DHCP_ARGS="${DHCP_ARGS} -C lookup-hostname"
+    if [ "${PEERNTPD}" = "yes" ]; then
+        DHCP_ARGS="${DHCP_ARGS} -o ntp_servers"
     else
-       ONESHOT="-1";
-    fi;
-    # allow users to use generic '/etc/dhcp/dhclient.conf' (as documented in manpage!)
-    # if per-device file doesn't exist or is empty
-    if [ -s /etc/dhcp/dhclient-${DEVICE}.conf ]; then
-       DHCLIENTCONF="-cf /etc/dhcp/dhclient-${DEVICE}.conf";
-    elif [ -s /etc/dhclient-${DEVICE}.conf ]; then
-       DHCLIENTCONF="-cf /etc/dhclient-${DEVICE}.conf";
+        DHCP_ARGS="${DHCP_ARGS} -C ntp.conf -O ntp_servers"
+    fi
+    if [ "${PEERYP}" = "yes" ]; then
+        DHCP_ARGS="${DHCP_ARGS} -o nis_domain -o nis_servers"
     else
-       DHCLIENTCONF='';
-    fi;
+        DHCP_ARGS="${DHCP_ARGS} -C yp.conf -C ypbind -O nis_domain -O nis_servers"
+    fi
+
+    DHCP_ARGS="${DHCP_ARGS} ${DEVICE}"
+    PIDF=/var/run/dhcpcd-${DEVICE}.pid
+    if [[ -f ${PIDF} ]]; then
+        PID=$(cat ${PIDF})
+        if [[ -n ${PID} ]]; then
+            echo "dhcpcd is running, ifdown the interface first"
+            exit;
+        fi
+        /bin/rm -f ${PIDF}; #clear it
+    fi
+    ;;
+    pump)
+    [ -n "$DHCP_HOSTNAME" ] && DHCP_ARGS="-h $DHCP_HOSTNAME"
+    [ "${NEEDHOSTNAME}" = "yes" ] && DHCP_ARGS="$DHCP_ARGS --lookup-hostname"
+    [ "${PEERDNS}" = "no" ] && DHCP_ARGS="$DHCP_ARGS -d"
+    [ "${PEERGATEWAY}" = "no" ] && DHCP_ARGS="$DHCP_ARGS --no-gateway"
+    DHCP_ARGS="$DHCP_ARGS -i $DEVICE"
+    ;;
+    dhcpxd)
+    # dhcpxd don't support NEEDHOSTNAME, PEERGATEWAY
+    [ -n "$DHCP_HOSTNAME" ] && DHCP_ARGS="-H $HOSTNAME"
+    DHCP_ARGS="$DHCP_ARGS --wait $DEVICE"
+    ;;
+    dhclient)
+    if [[ "${PERSISTENT_DHCLIENT}" = [yY1]* ]]; then
+	ONESHOT=
+    else
+	ONESHOT="-1"
+    fi
+    DHCP_ARGS="$DHCP_ARGS $ONESHOT -q -lf /var/lib/dhcp/dhclient-${DEVICE}.leases -pf /var/run/dhclient-${DEVICE}.pid -cf /etc/dhclient-${DEVICE}.conf $DEVICE"
+    if [ -n "$DHCP_HOSTNAME" ]; then
+	if [ ! -e /etc/dhclient-${DEVICE}.conf ] || ! grep -q "[^# ]*send *host-name" /etc/dhclient-${DEVICE}.conf; then
+	    echo "send host-name \"${DHCP_HOSTNAME}\";  $BLURB" >> /etc/dhclient-${DEVICE}.conf
+	fi
+    fi
+    if [ -n "$DHCP_TIMEOUT" ]; then
+	if [ ! -e /etc/dhclient-${DEVICE}.conf ] || ! grep -q "[^# ]*timeout" /etc/dhclient-${DEVICE}.conf; then
+	    echo "timeout $DHCP_TIMEOUT;  $BLURB" >> /etc/dhclient-${DEVICE}.conf
+	fi
+    fi	
+    ;;
+esac
+fi
+
+# Remove any temporary references which were previously added to dhclient config
+if [ -w /etc/dhclient-${DEVICE}.conf ] && [ -x /sbin/dhclient ] ; then
+   LC_ALL=C grep -v "# temporary MDK ifup addition" /etc/dhclient-${DEVICE}.conf > /etc/dhclient-${DEVICE}.conf.ifupnew 2> /dev/null
+   cat /etc/dhclient-${DEVICE}.conf.ifupnew > /etc/dhclient-${DEVICE}.conf
+   rm -f /etc/dhclient-${DEVICE}.conf.ifupnew
+fi
+		     
+if [ -n "${DYNCONFIG}" ]; then
     # copy any lease obtained by the initrd
     for file in /dev/.dhclient-${DEVICE}.leases /dev/.initramfs/net.${DEVICE}.lease ; do
         if [ -f "${file}" ]; then
@@ -184,22 +357,40 @@ if [ -n "${DYNCONFIG}" ] && [ -x /sbin/dhclient ]; then
             [ -x /sbin/restorecon ] && restorecon /var/lib/dhclient/dhclient-${DEVICE}.leases > /dev/null 2>&1
         fi
     done
-    DHCLIENTARGS="${DHCLIENTARGS} ${DHCP_HOSTNAME:+-H $DHCP_HOSTNAME} ${ONESHOT} -q ${DHCLIENTCONF} -lf /var/lib/dhclient/dhclient-${DEVICE}.leases -pf /var/run/dhclient-${DEVICE}.pid"
     echo
     echo -n $"Determining IP information for ${DEVICE}..."
     if [[ "${PERSISTENT_DHCLIENT}" !=  [yY1]* ]] && check_link_down ${DEVICE}; then
 	echo $" failed; no link present.  Check cable?"
+	ip link set dev ${DEVICE} down >/dev/null 2>&1
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
     fi
 
     if [ -n "$ETHTOOL_OPTS" ] ; then
-        /sbin/ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
+        ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
     fi
 
-    if /sbin/dhclient ${DHCLIENTARGS} ${DEVICE} ; then
+    mdv-network-event dhcp_request ${DEVICE}
+    if $DHCP_CLIENT $DHCP_ARGS ; then
+        mdv-network-event dhcp_success ${DEVICE}
 	echo $" done."
     else
+        mdv-network-event dhcp_failure ${DEVICE}
+	# Associate a zeroconf IP address to an alias of the interface
+	if [ -x /sbin/zcip ]; then
+            mdv-network-event zcip_request ${DEVICE}
+	    if /sbin/zcip -s -i $DEVICE:${ZEROCONF_ALIAS_NUMER=9}; then
+                mdv-network-event zcip_success ${DEVICE}
+		echo $" done."
+		if [ -x /etc/init.d/tmdns ]; then
+		    /etc/init.d/tmdns reload > /dev/null 2>&1
+		fi
+		exit 0
+	    fi
+	fi
+        mdv-network-event zcip_failure ${DEVICE}
 	echo $" failed."
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
     fi
 # end dynamic device configuration
@@ -208,7 +399,7 @@ else
          # enable device without IP, useful for e.g. PPPoE
 	 ip link set dev ${REALDEVICE} up
 	 if [ -n "$ETHTOOL_OPTS" ] ; then
-	 	/sbin/ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
+	 	ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
 	 fi
 	 [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
     else
@@ -220,11 +411,12 @@ else
    
     if ! ip link set dev ${REALDEVICE} up ; then
 	echo $"Failed to bring up ${DEVICE}."
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
     fi
 
     if [ -n "$ETHTOOL_OPTS" ] ; then
-        /sbin/ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
+        ethtool -s ${REALDEVICE} $ETHTOOL_OPTS
     fi
 
     [ -n "${LINKDELAY}" ] && /bin/sleep ${LINKDELAY}
@@ -241,41 +433,39 @@ else
        SRC=
     fi
     
-    # set IP address(es)
-    for idx in {0..256} ; do
-	if [ -z "${ipaddr[$idx]}" ]; then
-            break
-        fi
-
-        if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
-            [ "${REALDEVICE}" != "lo" ] && \
-            if ! /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]} ; then
-                echo $"Error, some other host already uses address ${ipaddr[$idx]}."
-                exit 1
-            fi
-
-            if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
-              brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
-                echo $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
-            fi
-        fi
-
-        if [ -n "$SRCADDR" ]; then
-               sysctl -w "net.ipv4.conf.${SYSCTLDEVICE}.arp_filter=1" >/dev/null 2>&1
-        fi
+    if [ "${REALDEVICE}" != "lo" ]; then
+    if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${IPADDR}/${PREFIX}" ; then
+	 if ! /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${IPADDR} ; then
+	    echo $"Error, some other host already uses address ${IPADDR}."
+	    mdv-network-event connection_failure ${DEVICE}
+	    exit 1
+	 fi
+	 if ! ip addr add ${IPADDR}/${PREFIX} \
+	    brd ${BROADCAST:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
+	    echo $"Error adding address ${IPADDR} for ${DEVICE}."
+	 fi
+    fi
+    
+    if [ -n "$SRCADDR" ]; then
+           sysctl -w "net.ipv4.conf.${REALDEVICE}.arp_filter=1" >/dev/null 2>&1
+    fi
 
-        # update ARP cache of neighboring computers
-        if [ "${REALDEVICE}" != "lo" ]; then
-          /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${ipaddr[$idx]}
-          ( sleep 2;
-            /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${ipaddr[$idx]} ) > /dev/null 2>&1 < /dev/null &
-        fi
-    done
+    # update ARP cache of neighboring computers
+    /sbin/arping -q -A -c 1 -I ${REALDEVICE} ${IPADDR}
+    ( sleep 2;
+      /sbin/arping -q -U -c 1 -I ${REALDEVICE} ${IPADDR} ) > /dev/null 2>&1 < /dev/null &
+    fi
 
     # Set a default route.
     if [ "${DEFROUTE}" != "no" ] && [ -z "${GATEWAYDEV}" -o "${GATEWAYDEV}" = "${REALDEVICE}" ]; then
 	# set up default gateway. replace if one already exists
-	if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${netmask[0]} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
+	if [ -n "${GATEWAY}" ] && [ "$(ipcalc --network ${GATEWAY} ${NETMASK} 2>/dev/null)" = "NETWORK=${NETWORK}" ]; then
+	    if [ -n "${ATM_ADDR}" -a -x /usr/sbin/atmarpd -a -x /usr/sbin/atmarp ]; then
+		ip link set dev ${REALDEVICE} down
+		ip link set dev ${REALDEVICE} up
+		sleep 2
+		atmarp -s ${GATEWAY} ${ATM_ADDR} null 2>/dev/null
+	    fi 
 	    ip route replace default ${METRIC:+metric $METRIC} \
 		via ${GATEWAY} ${WINDOW:+window $WINDOW} ${SRC} \
 		${GATEWAYDEV:+dev $GATEWAYDEV}
@@ -288,14 +478,16 @@ else
 fi
 
 # Add Zeroconf route.
-if [ -z "${NOZEROCONF}" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
+if [ "${NOZEROCONF}" != "yes" -a "${ISALIAS}" = "no" -a "${REALDEVICE}" != "lo" ]; then
     ip route add 169.254.0.0/16 dev ${REALDEVICE} metric $((1000 + $(cat /sys/class/net/${REALDEVICE}/ifindex))) scope link
 fi
 
 # IPv6 initialisation?
 /etc/sysconfig/network-scripts/ifup-ipv6 ${CONFIG}
-if [[ "${DHCPV6C}"  = [Yy1]* ]] && [ -x /sbin/dhclient ]; then
-    /sbin/dhclient -6 -1 ${DHCPV6C_OPTIONS} -lf /var/lib/dhclient/dhclient6-${DEVICE}.leases -pf /var/run/dhclient6-${DEVICE}.pid ${DHCP_HOSTNAME:+-H $DHCP_HOSTNAME} ${DEVICE}
+if [[ "${DHCPV6C}"  = [Yy1]* ]] && [ -x /sbin/dhcp6c ]; then
+    /sbin/dhcp6c ${DHCPV6C_OPTIONS} ${DEVICE}
+    dhcp6_pid=($(/bin/ps -eo 'pid,args' | /bin/grep "dhcp6c ${DHCPV6C_OPTIONS} ${DEVICE}" | egrep -v grep))
+    [ -n  "$dhcp6_pid" ] && echo ${dhcp6_pid[0]} > /var/run/dhcp6c_${DEVICE}.pid
 fi
 
 if [ "${IPX}" = yes ]; then
diff --git a/sysconfig/network-scripts/ifup-ippp b/sysconfig/network-scripts/ifup-ippp
deleted file mode 100755
index 7cfe6f39..00000000
--- a/sysconfig/network-scripts/ifup-ippp
+++ /dev/null
@@ -1,384 +0,0 @@
-#! /bin/sh
-#
-# ifup-ippp
-# 
-# This script is normally called from the ifup script when it detects a ippp device. 
-
-. /etc/init.d/functions
-
-cd /etc/sysconfig/network-scripts
-. ./network-functions
-
-# Get global network configuration
-[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
-
-GATEWAY=""
-
-# set device
-CONFIG=$1
-[ -f "${CONFIG}" ] || CONFIG=ifcfg-${1}
-source_config
-
-if [ "${2}" = "boot" -a "${ONBOOT}" = "no" ]; then
-  exit
-fi
-
-if [ ! -f /var/lock/subsys/isdn ] && [ -x /etc/init.d/isdn ] ; then
-    /etc/init.d/isdn start
-fi
-
-# check that ipppd is available for syncppp 
-if [ "$ENCAP" = "syncppp" ]; then
-    if [ ! -x /sbin/ipppd ] && [ ! -x /usr/sbin/ipppd ] ; then
-        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd does not exist or is not executable"
-        exit 1
-    fi
-fi
-
-# check that isdnctrl is available
-if [ ! -x /sbin/isdnctrl ] && [ ! -x /usr/sbin/isdnctrl ] ; then
-    /usr/bin/logger -p daemon.info -t ifup-ippp "isdnctrl does not exist or is not executable"
-    exit 1
-fi
-
-# check all ISDN devices
-if ! isdnctrl list all >/dev/null 2>&1 ; then
-    /usr/bin/logger -p daemon.info -t ifup-ippp "cannot list ISDN devices"
-    exit 1
-fi
-		
-# check if device already is configured
-isdnctrl list $DEVICE >/dev/null 2>&1 && exit 0
-
-function log_echo()
-{
-    /usr/bin/logger -p daemon.info -t ifup-ippp $"$*"
-}
-
-function log_isdnctrl()
-{
-    /usr/bin/logger -p daemon.info -t ifup-ippp isdnctrl $*
-    isdnctrl $* >/dev/null 2>&1 || exit 1
-}
-
-function create_option_file()
-{
-    umask 066
-    echo "$1" > /etc/ppp/ioption-secret-$DEVICE
-    umask 022
-}
-
-function start_ibod()
-{
-    # don't start ibod, if it's running
-    [ -f /var/lock/subsys/ibod ] && return
-
-    device=$1
-    if [ -f /etc/isdn/ibod.cf ] && [ -x /usr/sbin/ibod ] ; then
-        ibod $device &
-        pid=$(pidof ibod)
-        [ -n "$pid" ] && touch /var/lock/subsys/ibod
-    fi
-}
-
-function addprovider()
-{
-    options=
-    if [ -z "$PHONE_OUT" ]; then
-        log_echo "Error: $1: no outgoing phone number set"
-        return 1
-    fi
-
-    # set the encapsulation mode
-    [ -z "$ENCAP" ] && ENCAP="syncppp"
-
-    # set the dial mode
-    [ -z "$DIALMODE" ] && DIALMODE="off"
-
-    [ "$AUTH" = "none" -o "$AUTH" = "noauth" -o -z "$AUTH" ] && AUTH="-pap -chap"
-
-    # set layer-2/3 protocol 
-    [ -z "$L2_PROT" ] && L2_PROT="hdlc"
-    [ -z "$L3_PROT" ] && L3_PROT="trans"
-
-    # check local/remote IP
-    [ -z "$IPADDR" ] && IPADDR="0.0.0.0"
-    [ -z "$GATEWAY" ] && GATEWAY="0.0.0.0"
-
-    # set default route
-    [ "$DEFROUTE" = "yes" ] && options="$options defaultroute deldefaultroute"
-
-    # set authentication
-    _auth=$(echo "$AUTH" | sed 's/[a-z -]*//g')
-    if [ -n "$_auth" ]; then
-        if [ -z "$USER" -a "$DIALIN" != "on" ]; then
-            log_echo " Error: $1 (syncppp) user is not set"
-            return 1
-        fi
-        if [ "$DIALIN" != "on" ]; then
-        # we should hide the user name, so i add user name to option file.
-        if [ "$AUTH" = "-pap +chap" ]; then
-            create_option_file "name \"$USER\""
-        else
-            create_option_file "user \"$USER\""
-        fi
-        options="$options file /etc/ppp/ioption-secret-$DEVICE"
-        fi
- 
-        # authentication options:
-        # +pap and/or +chap does not work correct by dialout - remove
-        # them if it's configured as dialout
-        [ "$DIALIN" = "on" ] || AUTH=$(echo "$AUTH" | sed 's/+[a-z]*//g')
-    fi
-
-    # add ISDN device 
-    log_isdnctrl addif $DEVICE
-
-    # set local MSN
-    [ -z "$MSN" ]  || log_isdnctrl eaz $DEVICE $MSN
-
-    # set dialout numbers
-    if echo $COUNTRYCODE | grep ":" >/dev/null 2>&1 ; then
-        COUNTRYCODE="$(echo $COUNTRYCODE | cut -f 2 -d ':')"
-        [ "$COUNTRYCODE" = "0" ] && COUNTRYCODE=
-    else
-        COUNTRYCODE=
-    fi
-    for i in $PHONE_OUT; do
-        log_isdnctrl addphone $DEVICE out $COUNTRYCODE$PREFIX$AREACODE$i
-    done
-    for i in $PHONE_IN; do
-        log_isdnctrl addphone $DEVICE in $i
-    done
-
-    # set layer-2/3 protocol
-    log_isdnctrl l2_prot $DEVICE $L2_PROT
-    log_isdnctrl l3_prot $DEVICE $L3_PROT
-
-    # set encapsulation
-    log_isdnctrl encap $DEVICE $ENCAP
-
-    # set dialmode
-    log_isdnctrl dialmode $DEVICE $DIALMODE
- 
-    [ -n "$SECURE" ] && log_isdnctrl secure $DEVICE $SECURE
-    [ -n "$HUPTIMEOUT" ] && log_isdnctrl huptimeout $DEVICE $HUPTIMEOUT
-    [ -n "$CHARGEHUP" ] && log_isdnctrl chargehup $DEVICE $CHARGEHUP
-    [ -n "$CHARGEINT" ] && log_isdnctrl chargeint $DEVICE $CHARGEINT
-
-    [ -n "$IHUP" ] && log_isdnctrl ihup $DEVICE $IHUP
-
-    # set the number of dial atempts for each number
-    [ -n "$DIALMAX" ] && log_isdnctrl dialmax $DEVICE $DIALMAX
-
-    # set callback
-    if [ "$CALLBACK" = "out" -o "$CALLBACK" = "in" ] ; then
-        log_isdnctrl callback $DEVICE $CALLBACK
-    else
-        log_isdnctrl callback $DEVICE off
-    fi
-    [ -n "$CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $CBDELAY
-    [ -n "$CBHUP" ] && log_isdnctrl cbhup $DEVICE $CBHUP
- 
-    options="$options ipparam $DEVNAME"
-
-    [ "$ENCAP" = "syncppp" ] && log_isdnctrl pppbind $DEVICE
-
-    if [ "$IPADDR" = "0.0.0.0" ]; then
-        options="$options ipcp-accept-local"
-    else
-        if [ "$DIALIN" != "on" ]; then
-        options="$options noipdefault"
-        fi
-    fi
-    # Add device
-    options="$options /dev/$DEVICE"
- 
-    # set channel bundling
-    if [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ]; then
-        [ -z "$SLAVE_MSN" ] && SLAVE_MSN="$MSN"
-        [ -z "$SLAVE_PHONE_OUT" ] && SLAVE_PHONE_OUT="$PHONE_OUT"
-        [ -z "$SLAVE_PHONE_IN" ] && SLAVE_PHONE_IN="$PHONE_IN"
-        [ -z "$SLAVE_HUPTIMEOUT" ] && SLAVE_HUPTIMEOUT="$HUPTIMEOUT"
-        [ -z "$SLAVE_CHARGEHUP" ] && SLAVE_CHARGEHUP="$CHARGEHUP"
-        [ -z "$SLAVE_CHARGEINT" ] && SLAVE_CHARGEINT="$CHARGEINT"
-        [ -z "$SLAVE_CBHUP" ] && SLAVE_CBHUP="$CBHUP"
-        [ -z "$SLAVE_IHUP" ] && SLAVE_IHUP="$IHUP"
-        [ -z "$SLAVE_DIALMAX" ] && SLAVE_DIALMAX="$DIALMAX"
-        [ -z "$SLAVE_CALLBACK" ] && SLAVE_CALLBACK="$CALLBACK"
-        [ -z "$SLAVE_CBDELAY" ] && SLAVE_CBDELAY="$CBDELAY"
-        if [ "$DIALIN" != "on" ] ; then
-               [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="auto"
-        else
-               # Master should not dial by default on incoming MPPP
-               [ -z "$SLAVE_DIALMODE" ] && SLAVE_DIALMODE="$DIALMODE"
-        fi
-
-        slave=$SLAVE_DEVICE
-        options="$options /dev/$slave +mp"
-
-        # Create slave and set options
-        log_isdnctrl addslave $DEVICE $slave
-        [ -z $SLAVE_MSN ] || log_isdnctrl eaz $slave $SLAVE_MSN
-
-        # set phone number
-        for i in $SLAVE_PHONE_OUT; do
-            log_isdnctrl addphone $slave out $COUNTRYCODE$PREFIX$AREACODE$i
-        done
-        for i in $SLAVE_PHONE_IN; do
-            log_isdnctrl addphone $slave in $i
-        done
-
-        # set layer-2/3 protocol
-        log_isdnctrl l2_prot $slave $L2_PROT
-        log_isdnctrl l3_prot $slave $L3_PROT
-
-        # set encapsulation
-        log_isdnctrl encap $slave $ENCAP
-
-        # set dial mode
-        log_isdnctrl dialmode $slave $SLAVE_DIALMODE
-
-        [ -n "$SECURE" ] && log_isdnctrl secure $slave $SECURE
-        [ -n "$SLAVE_HUPTIMEOUT" ] && log_isdnctrl huptimeout $slave $SLAVE_HUPTIMEOUT
-        [ -n "$SLAVE_CHARGEHUP" ] && log_isdnctrl chargehup $slave $SLAVE_CHARGEHUP
-        [ -n "$SLAVE_CHARGEINT" ] && log_isdnctrl chargeint $slave $SLAVE_CHARGEINT
-        [ -n "$SLAVE_IHUP" ] && log_isdnctrl ihup $slave $SLAVE_IHUP
-        [ -n "$SLAVE_DIALMAX" ] && log_isdnctrl dialmax $slave $SLAVE_DIALMAX
-
-        # set callback
-        [ -n "$SLAVE_CBHUP" ] && log_isdnctrl cbhup $slave $SLAVE_CBHUP
-        [ -n "$SLAVE_CALLBACK" ] || SLAVE_CALLBACK="off"
-        log_isdnctrl callback $slave $SLAVE_CALLBACK
-        [ -n "$SLAVE_CBDELAY" ] && log_isdnctrl cbdelay $DEVICE $SLAVE_CBDELAY
-
-        # options for master device
-        [ -n "$SLAVE_DELAY" ] && log_isdnctrl sdelay $DEVICE $SLAVE_DELAY
-        [ -n "$SLAVE_TRIGGER" ] && log_isdnctrl trigger $DEVICE $SLAVE_TRIGGER
-    fi
-
-    if [ "$GATEWAY" = "0.0.0.0" ]; then
-        if [ "$DIALIN" != "on" ]; then
-        options="$options ipcp-accept-remote"
-        fi
-        options="$IPADDR:$GATEWAY $options"
-    else
-        options="$options $IPADDR:$GATEWAY"
-    fi
-
-    # Van Jacobson style TCP/IP header compression and
-    # VJ connection-ID compression
-    [ "$VJ" = "off" ] && options="$options -vj"
-    [ "$VJCCOMP" = "off" ] && options="$options -vjccomp"
-
-    # Address/Control compression, protocol field compression,
-    [ "$AC" = "off" ] && options="$options -ac"
-    [ "$PC" = "off" ] && options="$options -pc"
-
-    # BSD-Compression scheme
-    if [ "$BSDCOMP" = "on" ] ; then
-         options="$options bsdcomp 9,9"
-    else
-         options="$options -bsdcomp"
-    fi
-    # Stac compression
-    if [ "$LZS" = "on" ] ; then
-         # supports LZS check mode 3 and 4
-         [ -n "$LZS_MODE" ] || LZS_MODE="4"
-         [ "$LZS_MODE" = "3" ] && options="$options lzs 1"
-         [ "$LZS_MODE" = "4" ] && options="$options lzs 1:4"
-    fi
-
-    # Set max receive and max transmit units
-    [ -n "$MRU" ] && options="$options mru $MRU"
-    [ -n "$MTU" ] && options="$options mtu $MTU"
-
-    # set CBCP protocoll
-    if [ "$CBCP" = "on" ] ; then
-        if [ -n "$CBCP_MSN" ] ; then
-            # User managed callback
-            options="$options callback $CBCP_MSN"
-        else
-            # admin managed callback, it's enabled by default
-            options="$options callback 6"
-        fi
-    else
-        # Disable CBCP
-        options="$options -callback-cbcp"
-    fi
-
-    # set CCP protocoll
-    [ "$CCP" = "off" ] && options="$options noccp"
- 
-    # set host name
-    [ -n "$ISDN_HOSTNAME" ] && options="$options remotename $ISDN_HOSTNAME"
- 
-    # Set authentication
-    for i in $AUTH ; do
-        options="$options $i"
-    done
-
-    # add ppp options
-    for i in $PPPOPTIONS ; do
-        options="$options $i"
-    done
-
-    # check dns entry
-    if [ -z "$DNS1" -a -z "$DNS2" ]; then
-        options="$options ms-get-dns"
-    else
-        [ -n "$DNS1" ] && options="$options ms-dns $DNS1"
-        [ -n "$DNS2" ] && options="$options ms-dns $DNS2"
-    fi
-
-    # set debug 
-    [ "$DEBUG" = "yes" ] && options="-d $options"
-
-    # set netmask, if available
-    [ -n "$NETMASK" ] && netmask="netmask $NETMASK"
-
-    # activate ISDN device
-    /usr/bin/logger -p daemon.info -t ifup-ippp "ifconfig $DEVICE $IPADDR pointopoint $GATEWAY $netmask up"
-    ifconfig $DEVICE $IPADDR pointopoint $GATEWAY $netmask up >/dev/null 2>&1
-
-    if [ "$ENCAP" = "syncppp" ]; then
-        # start ipppd daemon
-        /usr/bin/logger -p daemon.info -t ifup-ippp "ipppd $options $netmask"
-        ipppd $options $netmask >/dev/null 2>&1
-
-        # start ibod daemon
-        if [ "$DIALIN" != "on" ]; then
-            [ "$BUNDLING" = "yes" -o "$BUNDLING" = "on" ] && [ -n "$SLAVE_DEVICE" ] && start_ibod $DEVICE
-        fi
-    fi
-
-    # set default gateway for dial on demand
-    if [ "$DIALMODE" = "auto" ] ; then
-        echo 1 > /proc/sys/net/ipv4/ip_dynaddr
-        if  [ "$DEFROUTE" = "yes" ] ; then
-            route del default >/dev/null 2>&1
-            if [ "$GATEWAY" = "0.0.0.0" ]; then
-                route add default ${METRIC:+metric $METRIC} $DEVICE \
-		    >/dev/null 2>&1
-            else
-                route add default gw $GATEWAY ${METRIC:+metric $METRIC} \
-		    >/dev/null 2>&1
-            fi
-        fi
-    fi
-
-    # Setup IPv6
-    if [ "$IPV6INIT" = "yes" -a ! -z "$IPV6ADDR" ]; then
-	    # Native IPv6 use of device configured, check of encapsulation required		
-            if [ "$ENCAP" = "syncppp" ]; then
-		echo $"Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp'"
-            elif [ "$ENCAP" = "rawip" ]; then
-		echo $"Warning: link doesn't support IPv6 using encapsulation 'rawip'"
-	    fi
-    fi
-    /etc/sysconfig/network-scripts/ifup-ipv6 $CONFIG
-}
-
-addprovider || exit 1
-
-exit 0
diff --git a/sysconfig/network-scripts/ifup-ipv6 b/sysconfig/network-scripts/ifup-ipv6
index da1062ec..4facc403 100755..100644
--- a/sysconfig/network-scripts/ifup-ipv6
+++ b/sysconfig/network-scripts/ifup-ipv6
@@ -80,6 +80,7 @@ ipv6_test || exit 1
 ipv6_test_device_status $DEVICE
 if [ $? != 0 -a $? != 11 ]; then
 	# device doesn't exist or other problem occurs
+        mdv-network-event connection_failure ${DEVICE}
 	exit 1
 fi
 
@@ -176,6 +177,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 	if [ $? = 0 ]; then
 		# device is already up
 		echo $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+	        mdv-network-event connection_failure ${DEVICE}
 		exit 1
 	fi
 
@@ -304,6 +306,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 		fi
 	else
 		echo $"6to4 configuration is not valid"
+	        mdv-network-event connection_failure ${DEVICE}
 		exit 1
         fi
 fi
diff --git a/sysconfig/network-scripts/ifup-plusb b/sysconfig/network-scripts/ifup-plusb
index e185e647..e185e647 100755..100644
--- a/sysconfig/network-scripts/ifup-plusb
+++ b/sysconfig/network-scripts/ifup-plusb
diff --git a/sysconfig/network-scripts/ifup-post b/sysconfig/network-scripts/ifup-post
index 29af56b7..a751bf38 100755
--- a/sysconfig/network-scripts/ifup-post
+++ b/sysconfig/network-scripts/ifup-post
@@ -3,7 +3,7 @@
 cd /etc/sysconfig/network-scripts
 . ./network-functions
 
-[ -f ../network ] && . ../network
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 unset REALDEVICE
 if [ "$1" = --realdevice ] ; then
@@ -22,8 +22,12 @@ fi
 
 /etc/sysconfig/network-scripts/ifup-routes ${REALDEVICE} ${DEVNAME}
 
+# metric setting (skip for alias interfaces)
+if [ "${REALDEVICE}" = "${DEVICE}" ] && [ -n "$METRIC" ] && type -p ifmetric > /dev/null 2>&1; then
+    ifmetric ${DEVICE} $METRIC
+fi
 
-if [ "$PEERDNS" != "no" ] ||[ -n "$RESOLV_MODS" -a "$RESOLV_MODS" != "no" ]; then
+if [ "$PEERDNS" != "no" -a "$BOOTPROTO" != "dhcp" ] ||[ -n "$RESOLV_MODS" -a "$RESOLV_MODS" != "no" ]; then
   [ -n "$MS_DNS1" ] && DNS1=$MS_DNS1
   [ -n "$MS_DNS2" ] && DNS2=$MS_DNS2
   if [ -n "$DNS1" ] && ! grep -q "^nameserver $DNS1" /etc/resolv.conf &&
@@ -96,6 +100,12 @@ fi
 # Notify programs that have requested notification
 do_netreport
 
+mdv-network-event interface_up ${DEVICE}
+
+if [ -d /etc/sysconfig/network-scripts/ifup.d -a -x /usr/bin/run-parts ]; then
+    /usr/bin/run-parts --arg ${DEVICE} /etc/sysconfig/network-scripts/ifup.d
+fi
+
 if [ -x /sbin/ifup-local ]; then
     /sbin/ifup-local ${DEVICE}
 fi
diff --git a/sysconfig/network-scripts/ifup-ppp b/sysconfig/network-scripts/ifup-ppp
index fb30639d..d53f3d70 100755
--- a/sysconfig/network-scripts/ifup-ppp
+++ b/sysconfig/network-scripts/ifup-ppp
@@ -9,16 +9,20 @@ cd /etc/sysconfig/network-scripts
 if [ "${1}" = daemon ] ; then
   # we've been called from ppp-watch, so don't invoke it for persistence
   shift
+  # do not detach connection so that ppp-watch can monitor it
+  DETACH=nodetach
 else
   # just in case a full path to the configuration file is passed in
   CONFIG=${1##*/} # CONFIG=$(basename $1)
   [ -f "${CONFIG}" ] || CONFIG=ifcfg-${1}
   source_config
-  # don't start ppp-watch by xDSL
-  if [ "${DEMAND}" != yes -a "$TYPE" != "xDSL" ] ; then
+  # don't start ppp-watch by xDSL and ADSL
+  if [ "${DEMAND}" != yes -a "$TYPE" != "xDSL" -a "$TYPE" != "ADSL" ] ; then
     # let ppp-watch do the right thing
     exec /sbin/ppp-watch "${CONFIG##ifcfg-}" "$2"
   fi
+  # detach connection not to hang boot
+  DETACH=updetach
 fi
 
 CONFIG=$1
@@ -46,17 +50,19 @@ fi
   echo $"ifup-ppp for ${DEVICE} exiting"
   /usr/bin/logger -p daemon.info -t ifup-ppp \
     $"pppd does not exist or is not executable for ${DEVICE}"
+  mdv-network-event connection_failure ${DEVICE}
   exit 1
 }
 
 # check that xDSL connection
 if [ "$TYPE" = "xDSL" ] ; then
     if [ -x /usr/sbin/adsl-start ] ; then
-        adsl-start /etc/sysconfig/network-scripts/$CONFIG
+        adsl-start
         exit $?
     else
         /usr/bin/logger -p daemon.info -t ifup-ppp \
             $"adsl-start does not exist or is not executable for ${DEVICE}"
+        mdv-network-event connection_failure ${DEVICE}
         exit 1
     fi
 fi
@@ -75,6 +81,7 @@ if [ ! -f ${PEERCONF} ]; then
      echo $"ifup-ppp for ${DEVNAME} exiting"
      /usr/bin/logger -p daemon.info -t ifup-ppp \
        $"/etc/sysconfig/network-scripts/chat-${DEVNAME} does not exist for ${DEVICE}"
+     mdv-network-event connection_failure ${DEVICE}
      exit 1
     }
   fi
@@ -102,12 +109,12 @@ fi
 if [ "${DEFROUTE}" != no ] ; then
   # pppd will no longer delete an existing default route
   # so we have to help it out a little here.
-  DEFRT=$(ip route list match 0.0.0.0/0)
+  DEFRT=$(ip route list match 0.0.0.0/0 dev ${DEVICE})
   [ -n "${DEFRT}" ] && echo "$DEFRT" > /etc/default-routes
-  echo "$DEFRT" | while read spec; do
+  [ -n "${DEFRT}" ] && echo "$DEFRT" | while read spec; do
       ip route del $spec;
   done
-  opts="$opts defaultroute"
+  opts="$opts defaultroute multipledefaultroutes"
 fi
 if [ "${PEERDNS}" != no ] ; then
   cp -f /etc/resolv.conf /etc/resolv.conf.save
@@ -130,16 +137,30 @@ if [ "${DEBUG}" = yes ] ; then
   opts="$opts debug"
 fi
 
-if [ ${DEMAND} = yes ] ; then
+if [ "${DEMAND}" = yes ] ; then
   opts="$opts demand ktune idle ${IDLETIMEOUT} holdoff ${RETRYTIMEOUT}"
   exec=
 else
-  opts="$opts nodetach"
+  opts="$opts $DETACH"
   exec=exec
 fi
 
-/usr/bin/logger -p daemon.info -t ifup-ppp \
-  $"pppd started for ${DEVNAME} on ${MODEMPORT} at ${LINESPEED}"
+if [ "$TYPE" != "xDSL" -a "$TYPE" != "ADSL" ] ; then
+    CELLULAR_PIN=$(cat pin-${DEVICE} 2>/dev/null)
+    if [ -n "$CELLULAR_PIN" -a -x /usr/sbin/comgt ]; then
+	COMGTPIN=$CELLULAR_PIN comgt PIN -d $MODEMPORT
+    fi
+fi
+
+# ATM bridging support, enabled if ATM_ADDR is defined (VCI.VPI)
+# useful for pppoe over USB modems 
+if [ -n "${ATM_ADDR}" -a -n "${ATM_DEVICE}" -a -x /usr/sbin/br2684ctl ]; then
+    br2684ctl -b -c 0 -a ${ATM_ADDR}
+    ifconfig ${ATM_DEVICE} up
+fi 
+
+(logger -p daemon.info -t ifup-ppp \
+  $"pppd started for ${DEVNAME} on ${MODEMPORT} at ${LINESPEED}" &)&
 
 $exec pppd $opts ${MODEMPORT} ${LINESPEED} \
     ipparam ${DEVNAME} linkname ${DEVNAME} call ${DEVNAME}\
diff --git a/sysconfig/network-scripts/ifup-sit b/sysconfig/network-scripts/ifup-sit
index f593a677..b41dbf81 100755..100644
--- a/sysconfig/network-scripts/ifup-sit
+++ b/sysconfig/network-scripts/ifup-sit
@@ -56,11 +56,13 @@ ipv6_test || exit 1
 # Generic tunnel device sit0 is not supported here
 if [ "$DEVICE" = "sit0" ]; then
 	echo $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
 fi
 
 if [ -z "$IPV6TUNNELIPV4" ]; then
 	echo $"Missing remote IPv4 address of tunnel, configuration is not valid"
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
 fi
 
@@ -69,6 +71,7 @@ ipv6_test_device_status $DEVICE
 if [ $? = 0 ]; then
 	# device is already up
 	echo $"Device '$DEVICE' is already up, please shutdown first"
+	mdv-network-event connection_failure ${DEVICE}
 	exit 1
 fi
 
diff --git a/sysconfig/network-scripts/ifup-tunnel b/sysconfig/network-scripts/ifup-tunnel
index 8fd631e5..fe43cdd9 100755
--- a/sysconfig/network-scripts/ifup-tunnel
+++ b/sysconfig/network-scripts/ifup-tunnel
@@ -54,6 +54,7 @@ esac
 # Generic tunnel devices are not supported here
 if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 ]; then
     echo $"Device '$DEVICE' isn't supported as a valid GRE device name."
+    mdv-network-event connection_failure ${DEVICE}
     exit 1
 fi
 
diff --git a/sysconfig/network-scripts/ifup-wireless b/sysconfig/network-scripts/ifup-wireless
index 3f2759c4..a75699ec 100755
--- a/sysconfig/network-scripts/ifup-wireless
+++ b/sysconfig/network-scripts/ifup-wireless
@@ -18,6 +18,7 @@
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 #
 # Configure wireless network device options.  See iwconfig(8) for more info.
+# Mandriva prefixes the following variables with WIRELESS_ prefix.
 # Valid variables:
 #    MODE: Ad-Hoc, Managed, etc.
 #    ESSID: Name of the wireless network
@@ -26,44 +27,94 @@
 #    CHANNEL: Numbered frequency to operate on.  See FREQ
 #    SENS: Sensitivity threshold for packet rejection.
 #    RATE: Transfer rate.  Usually one of Auto, 11, 5, 2, or 1.
-#    KEY: Encryption key for WEP.
 #    RTS: Explicit RTS handshake.  Usually not specified (auto)
 #    FRAG: Fragmentation threshold to split packets.  Usually not specified.
-#    SPYIPS: List of IP addresses to "spy" on for link performance stats.
 #    IWCONFIG: Extra parameters to pass directly to IWCONFIG
-#    SECURITYMODE: Security mode, e.g: 'open' or 'restricted'
 #    IWPRIV: Extra parameters to pass directly to IWPRIV
+#
+#    redhat-only variables:
+#    KEY: Encryption key for WEP.
+#    KEY[1-4]: Encryption key for WEP in position [1-4]
+#    SECURITYMODE: Security mode, e.g: 'open' or 'restricted'
+#    SPYIPS: List of IP addresses to "spy" on for link performance stats.
+#
+#    mandriva-only variables:
+#    WIRELESS_NICK: nickname for wireless connection
+#    WIRELESS_ENC_KEY: Encryption key for WEP.
+#    WIRELESS_ENC_MODE: Security mode, e.g: 'open' or 'restricted'
+#    WIRELESS_XSUPPLICANT: Enabling xsupplicant support
+#    WIRELESS_XSUPPLICANT_FILE: Custom location for xsupplicant.conf file
 
 # Only meant to be called from ifup.
 
+# unify variables common to RH and Mandriva-style ifcfg
+MODE=${MODE:-$WIRELESS_MODE}
+ESSID=${ESSID:-$WIRELESS_ESSID}
+NWID=${NWID:-$WIRELESS_NWID}
+FREQ=${FREQ:-$WIRELESS_FREQ}
+CHANNEL=${CHANNEL:-$WIRELESS_CHANNEL}
+SENS=${SENS:-$WIRELESS_SENS}
+RATE=${RATE:-$WIRELESS_RATE}
+POWER=${POWER:-$WIRELESS_POWER}
+RTS=${RTS:-$WIRELESS_RTS}
+FRAG=${FRAG:-$WIRELESS_FRAG}
+IWCONFIG=${IWCONFIG:-$WIRELESS_IWCONFIG}
+IWSPY=${IWSPY:-$WIRELESS_IWSPY}
+IWPRIV=${IWPRIV:-$WIRELESS_IWPRIV}
+
 # Mode need to be first : some settings apply only in a specific mode !
 if [ -n "$MODE" ] ; then
+    # for some cards, the mode can only be set with the card is down
+    # so we bring the card down (and suspending ifplugd if it is running)
+    # in order to do so (mdv bug #43166)
+    ifplugd -S -i $DEVICE 2>/dev/null
+    /sbin/ip link set dev $DEVICE down
     iwconfig $DEVICE mode $MODE
+    ifplugd -R -i $DEVICE 2>/dev/null
 fi
 
 # Set link up (some cards require this.)
 /sbin/ip link set dev ${DEVICE} up
 
+# Setup the card nickname
 # This is a bit hackish, but should do the job right...
 if [ -n "$ESSID" -o -n "$MODE" ] ; then
     NICKNAME=$(/bin/hostname)
     iwconfig $DEVICE nick "$NICKNAME" >/dev/null 2>&1
 fi
+if [ -n "$WIRELESS_NICK" ] ; then
+    iwconfig $DEVICE nick $WIRELESS_NICK >/dev/null 2>&1
+elif [ -n "$ESSID" ] || [ -n "$MODE" ] ; then
+   # This is a bit hackish, but should do the job right...
+    NICKNAME=`/bin/hostname`
+    iwconfig $DEVICE nick $NICKNAME >/dev/null 2>&1
+fi
+
 # Regular stuff...
+# network id
 if [ -n "$NWID" ] ; then
     iwconfig $DEVICE nwid $NWID
 fi
+
+# frequency and channel
 if [ -n "$FREQ" -a "$MODE" != "Managed" ] ; then
     iwconfig $DEVICE freq $FREQ
 elif [ -n "$CHANNEL" -a "$MODE" != "Managed" ] ; then
     iwconfig $DEVICE channel $CHANNEL
 fi
+
+# sensitivity
 if [ -n "$SENS" ] ; then
     iwconfig $DEVICE sens $SENS
 fi
+
+# rate
 if [ -n "$RATE" ] ; then
     iwconfig $DEVICE rate "$RATE"
 fi
+
+# encryption
+# for redhat-style ifcfg
 if [ -n "$KEY" -o -n "$KEY1" -o -n "$KEY2" -o -n "$KEY3" -o -n "$KEY4" ] ; then
     [ -n "$KEY1" ] && iwconfig $DEVICE key "[1]" $KEY1
     [ -n "$KEY2" ] && iwconfig $DEVICE key "[2]" $KEY2
@@ -74,12 +125,39 @@ if [ -n "$KEY" -o -n "$KEY1" -o -n "$KEY2" -o -n "$KEY3" -o -n "$KEY4" ] ; then
 else
     iwconfig $DEVICE key off
 fi
+
+# for mandriva-style ifcfg
+if [ -n "$WIRELESS_ENC_KEY" -o "$WIRELESS_ENC_MODE" ] ; then
+    if [ -n "$WIRELESS_ENC_MODE" ]; then
+        iwconfig $DEVICE key $WIRELESS_ENC_MODE "$WIRELESS_ENC_KEY"
+    else
+        # compatibility for older config files
+        # that used to contain enc mode in key
+        echo "$WIRELESS_ENC_KEY" | egrep -q '^(open|restricted) '
+        if [ $? == 0 ]; then
+                iwconfig $DEVICE key $WIRELESS_ENC_KEY
+        else
+                iwconfig $DEVICE key "$WIRELESS_ENC_KEY"
+        fi
+    fi
+fi
+
+# security mode
 if [ -n "$SECURITYMODE" ]; then
     iwconfig $DEVICE enc $SECURITYMODE
 fi
+
+# power
+if [ -n "$POWER" ] ; then
+    iwconfig $DEVICE power $POWER
+fi
+
+# rts
 if [ -n "$RTS" ] ; then
     iwconfig $DEVICE rts $RTS
 fi
+
+# fragmentation
 if [ -n "$FRAG" ] ; then
     iwconfig $DEVICE frag $FRAG
 fi
@@ -89,13 +167,21 @@ if [ -n "$IWCONFIG" ] ; then
     iwconfig $DEVICE $IWCONFIG
 fi
 
+# iwspy settings
 if [ -n "$SPYIPS" ] ; then
     for IP in $SPYIPS; do
-	iwspy $DEVICE + $IP
+        iwspy $DEVICE + $IP
     done
 fi
+if [ -n "$IWSPY" ] ; then
+    /sbin/iwspy $DEVICE $IWSPY
+fi
+
+# private options
 if [ -n "$IWPRIV" ] ; then
-    iwpriv $DEVICE $IWPRIV
+    IFS=$'\n' echo "$IWPRIV" | while read priv; do
+        [ -n -n "$priv" ] && eval "/sbin/iwpriv $DEVICE $priv"
+    done
 fi
 
 # ESSID need to be last : most device re-perform the scanning/discovery
@@ -107,3 +193,17 @@ else
     # use any essid
     iwconfig $DEVICE essid any >/dev/null 2>&1
 fi
+
+# settings for xsupplicant
+if [ -n "$WIRELESS_XSUPPLICANT" -a -x /usr/sbin/xsupplicant ]; then
+    if [ -f /var/run/console.lock ] ; then
+        WIRELESS_XSUPPLICANT_FILE=/home/$(cat /var/run/console.lock)/.xsupplicant.conf
+    elif [ -f /etc/xsupplicant.conf ] ; then
+        WIRELESS_XSUPPLICANT_FILE=/etc/xsupplicant.conf
+    fi
+    if [ -n "$WIRELESS_XSUPPLICANT_FILE" ]; then
+        iwconfig $DEVICE key on
+        ifconfig $DEVICE allmulti
+        /usr/sbin/xsupplicant -i ${DEVICE} -c ${WIRELESS_XSUPPLICANT_FILE} &
+    fi
+fi
diff --git a/sysconfig/network-scripts/network-functions b/sysconfig/network-scripts/network-functions
index 562fe7cb..37e088a0 100644
--- a/sysconfig/network-scripts/network-functions
+++ b/sysconfig/network-scripts/network-functions
@@ -9,6 +9,8 @@ export PATH
 
 [ -z "$__sed_discard_ignored_files" ] && . /etc/init.d/functions
 
+RESOLVCONF_FLAGFILE=/var/run/resolvconf/enable-updates
+
 get_hwaddr ()
 {
     if [ -f /sys/class/net/${1}/address ]; then
@@ -54,11 +56,6 @@ get_device_by_hwaddr ()
     LANG=C ip -o link | grep -v link/ieee802.11 | awk -F ': ' -vIGNORECASE=1 "/$1/ { print \$2 }"
 }
 
-get_uuid_by_config ()
-{
-    dbus-send --system --print-reply --dest=com.redhat.ifcfgrh1 /com/redhat/ifcfgrh1 com.redhat.ifcfgrh1.GetIfcfgDetails string:"/etc/sysconfig/network-scripts/$1" 2>/dev/null | awk -F '"' '/string / { print $2 }'
-}
-
 need_config ()
 {
     local nconfig
@@ -121,6 +118,9 @@ source_config ()
 	CTC)
 		DEVICETYPE="ctc"
 		;;
+	IUCV)
+		DEVICETYPE="iucv"
+		;;
 	GRE | IPIP)
 		DEVICETYPE="tunnel"
 		;;
@@ -147,46 +147,27 @@ source_config ()
     else
 	ISALIAS=no
     fi
-    ! is_false $NM_CONTROLLED && is_nm_running && USE_NM=true
-    if [ -z "$UUID" -a "$USE_NM" = "true" ]; then
-	UUID=$(get_uuid_by_config $CONFIG)
-    fi
+    is_true $NM_CONTROLLED && USE_NM=true
 }
 
 
 
 expand_config ()
 {
-    local i=0 val
-    for idx in '' {0..255} ; do
-        ipaddr[$i]=$(eval echo '$'IPADDR$idx)
-        if [ -z "${ipaddr[$i]}" ]; then
-           [ "$idx" ] && [ $idx -gt 2 ] && break
-           continue
-        fi
-        prefix[$i]=$(eval echo '$'PREFIX$idx)
-        netmask[$i]=$(eval echo '$'NETMASK$idx)
-        broadcast[$i]=$(eval echo '$'BROADCAST$idx)
-
-        if [ "${netmask[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --netmask "${ipaddr[$i]}")
-            netmask[$i]=${val##NETMASK=}
-        fi
+    if [ -z "${NETMASK}" ]; then
+        eval $(/bin/ipcalc --netmask ${IPADDR})
+    fi
 
-        if [ "${prefix[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --prefix ${ipaddr[$i]} ${netmask[$i]})
-            prefix[$i]=${val##PREFIX=}
-        fi
+    if [ -z "${PREFIX}" ]; then
+        eval $(/bin/ipcalc --prefix ${IPADDR} ${NETMASK})
+    fi
 
-        if [ "${broadcast[$i]}x" = "x" ]; then
-            val=$(/bin/ipcalc --broadcast ${ipaddr[$i]} ${netmask[$i]})
-            broadcast[$i]=${val##BROADCAST=}
-        fi
-        i=$((i+1))
-    done
+    if [ -z "${BROADCAST}" ]; then
+        eval $(/bin/ipcalc --broadcast ${IPADDR} ${NETMASK})
+    fi
 
     if [ -z "${NETWORK}" ]; then
-        eval $(/bin/ipcalc --network ${ipaddr[0]} ${netmask[0]})
+        eval $(/bin/ipcalc --network ${IPADDR} ${NETMASK})
     fi
 }
 
@@ -221,17 +202,19 @@ do_netreport ()
 
 is_nm_running ()
 {
-    [ "$(LANG=C nmcli -t --fields running nm status 2>/dev/null)" = "running" ]
+    [ -x /usr/bin/nmcli ] && \
+    [ "$(LANG=C LC_ALL=C nmcli -t --fields running nm status 2>/dev/null)" = "running" ]
 }
 
 is_nm_active ()
 {
-    LANG=C nmcli -t --fields device,state  dev status 2>/dev/null | grep -q "^${1}:connected$"
+    [ -x /usr/bin/nmcli ] && \
+    LANG=C LC_ALL=C nmcli -t --fields device,state  dev status 2>/dev/null | grep -q "^${1}:connected$"
 }
 
 is_nm_device_unmanaged ()
 {
-    LANG=C nmcli -t --fields device,state  dev status 2>/dev/null | grep -q "^${1}:unmanaged$"
+    LANG=C LC_ALL=C nmcli -t --fields device,state  dev status 2>/dev/null | grep -q "^${1}:unmanaged$"
 }
 
 # Sets $alias to the device module if $? != 0
@@ -297,20 +280,34 @@ set_hostname ()
 		/bin/rm -f $rsctmp
 	fi	
     fi
+    if [ -d /etc/sysconfig/network-scripts/hostname.d -a -x /usr/bin/run-parts ]; then
+	/usr/bin/run-parts --arg $1 /etc/sysconfig/network-scripts/hostname.d
+    fi
 }
 
 check_device_down ()
 {
-     if LC_ALL=C ip -o link show dev $1 2>/dev/null | grep -q ",UP" ; then
+    if echo $1 | grep -q ':' ; then
+     if LC_ALL=C ifconfig -a 2>/dev/null | grep -q $1 ; then
+	  return 1
+     else
+	  return 0
+     fi
+    else 
+     if LC_ALL=C ip -o link 2>/dev/null | grep -q "$1[:@].*,UP" ; then
 	return 1
      else
 	return 0
      fi
+    fi
 }
 
 check_link_down ()
 {
-        if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q ",UP" ; then
+    if [ "${MII_NOT_SUPPORTED}" = yes ]; then
+	return 1
+    fi
+        if ! LC_ALL=C ip link show dev $1 2>/dev/null| grep -q UP ; then
 	   ip link set dev $1 up >/dev/null 2>&1
 	fi
 	timeout=0
@@ -409,19 +406,35 @@ change_resolv_conf ()
 	    fi;
 	    n_args=$(($n_args-1));
          done;       
-    elif [ $# -eq 1 ]; then
+    elif [ $# -eq 1 -a -r "$1" ]; then
        if [ "x$s" != "x" ]; then
 	  s="$s"$(/bin/grep -vF "$s" $1);
        else
 	  s=$(cat $1);
        fi;
+    else
+       return
     fi;
-    (echo "$s" > /etc/resolv.conf;) >/dev/null 2>&1;
+    if [ -e "$RESOLVCONF_FLAGFILE" ]; then
+	echo "$s" | /sbin/resolvconf -a ${DEVICE}
+    else
+	(echo "$s" > /etc/resolv.conf;) >/dev/null 2>&1;
+    fi
     r=$?
     if [ $r -eq 0 ]; then
 	[ -x /sbin/restorecon ] && /sbin/restorecon /etc/resolv.conf >/dev/null 2>&1 # reset the correct context
 	/usr/bin/logger -p local7.notice -t "NET" -i "$0 : updated /etc/resolv.conf";
-	[ -e /var/lock/subsys/nscd ] && /usr/sbin/nscd -i hosts; # invalidate cache
+	[ -e /var/lock/subsys/nscd ] && [ ! -e "$RESOLVCONF_FLAGFILE" ] && /usr/sbin/nscd -i hosts; # invalidate cache
     fi;
     return $r;
 }
+
+clear_resolv_conf ()
+{
+    if [ -e "$RESOLVCONF_FLAGFILE" ]; then
+	/sbin/resolvconf -d ${DEVICE}
+    elif [ -f /etc/resolv.conf.save ]; then
+	change_resolv_conf /etc/resolv.conf.save
+	rm -f /etc/resolv.conf.save
+    fi
+}
diff --git a/sysconfig/networking/ifcfg-lo b/sysconfig/networking/ifcfg-lo
new file mode 100755
index 00000000..cb4f3f94
--- /dev/null
+++ b/sysconfig/networking/ifcfg-lo
@@ -0,0 +1,9 @@
+DEVICE=lo
+IPADDR=127.0.0.1
+NETMASK=255.0.0.0
+NETWORK=127.0.0.0
+# If you're having problems with gated making 127.0.0.0/8 a martian,
+# you can change this to something else (255.255.255.255, for example)
+BROADCAST=127.255.255.255
+ONBOOT=yes
+NAME=loopback