Use net_log where appropriate.

10 files changed, 45 insertions, 45 deletions

diff --git a/sysconfig/network-scripts/ifdown-eth b/sysconfig/network-scripts/ifdown-eth
index 530975c3..80b99544 100755
--- a/sysconfig/network-scripts/ifdown-eth
+++ b/sysconfig/network-scripts/ifdown-eth
@@ -39,13 +39,13 @@ if [ -n "${HWADDR}" -a -z "${MACADDR}" ]; then
 	if [ -n "${NEWCONFIG}" ]; then
 	   eval $(LANG=C grep -F "DEVICE=" $NEWCONFIG)
 	else
-	   echo $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
+	   net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
 	   exit 1
 	fi
 	if [ -n "${NEWCONFIG}" -a "${NEWCONFIG##*/}" != "${CONFIG##*/}" -a "${DEVICE}" = "${REALDEVICE}" ]; then
 	   exec /sbin/ifdown ${NEWCONFIG}
 	else
-	   echo $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
+	   net_log $"Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring."
 	   exit 1
 	fi
     fi
diff --git a/sysconfig/network-scripts/ifdown-sit b/sysconfig/network-scripts/ifdown-sit
index 314b91f1..39e9c50f 100755
--- a/sysconfig/network-scripts/ifdown-sit
+++ b/sysconfig/network-scripts/ifdown-sit
@@ -37,7 +37,7 @@ REALDEVICE=${DEVICE%%:*}
 
 # Generic tunnel device sit0 is not supported here
 if [ "$DEVICE" = "sit0" ]; then
-	echo $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
+	net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
 	exit 1
 fi
 
diff --git a/sysconfig/network-scripts/ifdown-tunnel b/sysconfig/network-scripts/ifdown-tunnel
index a1f643c7..2853a0a8 100755
--- a/sysconfig/network-scripts/ifdown-tunnel
+++ b/sysconfig/network-scripts/ifdown-tunnel
@@ -33,7 +33,7 @@ source_config
 
 # Generic tunnel devices are not supported here
 if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 ]; then
-    echo $"Device '$DEVICE' isn't supported as a valid GRE device name."
+    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
     exit 1
 fi
 
diff --git a/sysconfig/network-scripts/ifup b/sysconfig/network-scripts/ifup
index 0089f3e9..f2980b39 100755
--- a/sysconfig/network-scripts/ifup
+++ b/sysconfig/network-scripts/ifup
@@ -83,21 +83,21 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ]; then
 	VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//')
 	# PHYSDEV should be set in ifcfg-vlan* file
 	if test -z "$PHYSDEV"; then
-		echo $"PHYSDEV should be set for device ${DEVICE}"
+		net_log $"PHYSDEV should be set for device ${DEVICE}"
 		exit 1
 	fi
     fi
     if [ -n "$VID" ]; then
 	if [ ! -d /proc/net/vlan ]; then
             if ! modprobe 8021q >/dev/null 2>&1 ; then
-		echo $"No 802.1Q VLAN support available in kernel for device ${DEVICE}"
+		net_log $"No 802.1Q VLAN support available in kernel for device ${DEVICE}"
 		exit 1
 	    fi
 	fi
 
 	is_available ${PHYSDEV} || {
 	    if [ "$?" = "1" ] ; then
-		echo $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+		net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
 		exit 1
 	    else
 		exit 0
@@ -121,7 +121,7 @@ if [ "${VLAN}" = "yes" ] && [ "$ISALIAS" = "no" ]; then
 	    ip link add dev ${DEVICE} link ${PHYSDEV} type vlan id ${VID} ${FLAG_REORDER_HDR} ${FLAG_GVRP} || {
 		(/usr/bin/logger -p daemon.info -t ifup \
 		    $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}" &)&
-		echo $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
+		net_log $"ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV}"
 		exit 1
 	    }
 	fi
diff --git a/sysconfig/network-scripts/ifup-aliases b/sysconfig/network-scripts/ifup-aliases
index 1312eede..6fa71921 100755
--- a/sysconfig/network-scripts/ifup-aliases
+++ b/sysconfig/network-scripts/ifup-aliases
@@ -125,7 +125,7 @@ eval ` (
 
 # read defaults from the parent config file
 [ -f $PARENTCONFIG ] || {
-       echo $"Missing config file $PARENTCONFIG." >&2
+       net_log $"Missing config file $PARENTCONFIG."
        exit 1
 }
 eval ` (
@@ -169,7 +169,7 @@ function new_interface ()
 
        MATCH='^[0-9A-Za-z_]*$'
        if (LC_ALL=C; [[ ! "$DEVNUM" =~ $MATCH ]]); then
-	      echo $"error in $FILE: invalid alias number" >&2
+	      net_log $"error in $FILE: invalid alias number"
 	      return 1
        fi
 
@@ -179,17 +179,17 @@ function new_interface ()
        ";
 
        if [ -n "$ipseen" ]; then
-              echo $"error in $FILE: already seen ipaddr $IPADDR in $ipseen" >&2
+              net_log $"error in $FILE: already seen ipaddr $IPADDR in $ipseen"
 	      return 1
        fi
 
        if [ -n "$devseen" ]; then
-              echo $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen" >&2
+              net_log $"error in $FILE: already seen device $parent_device:$DEVNUM in $devseen"
 	      return 1
        fi
 
        if [ -z "$DEVICE" -o -z "$IPADDR" ]; then
-              echo $"error in $FILE: didn't specify device or ipaddr" >&2
+              net_log $"error in $FILE: didn't specify device or ipaddr"
 	      return 1
        fi
 
@@ -256,7 +256,7 @@ function new_interface ()
                                setup_this=yes
                        fi
                        if [ -n "$rdev_mark" -a "$rdev_mark" != "$newmark" ]; then
-                               echo $"error in ifcfg-${parent_device}: files" >&2
+                               net_log $"error in ifcfg-${parent_device}: files"
 			       return 1
                        fi
                        eval " rdev_${DEVNUM}_mark=\$newmark ";
@@ -267,7 +267,7 @@ function new_interface ()
                if [ -n "$rdevip" -a "$rdevip" != "${DEVNUM}" ]; then
                        eval " mark_remove=\$rdev_${rdevip}_mark ";
                        if [ -n "$mark_remove" -a "$mark_remove" != "remove" ]; then
-                               echo $"error in ifcfg-${parent_device}: files" >&2
+                               net_log $"error in ifcfg-${parent_device}: files"
 			       return 1
                        fi
                        if [ "$mark_remove" != "remove" ]; then
@@ -337,11 +337,11 @@ for FILE in ifcfg-${parent_device}-range* ; do
        ipaddr_endnum=${IPADDR_END##*.}
 
        if [ "${IPADDR_START%.*}" != "${IPADDR_END%.*}" ]; then
-               echo $"error in $FILE: IPADDR_START and IPADDR_END don't agree" >&2; continue
+               net_log $"error in $FILE: IPADDR_START and IPADDR_END don't agree"; continue
        fi
 
        if [ $ipaddr_startnum -gt $ipaddr_endnum ]; then
-               echo $"error in $FILE: IPADDR_START greater than IPADDR_END" >&2; continue
+               net_log $"error in $FILE: IPADDR_START greater than IPADDR_END"; continue
        fi
 
        ipaddr_num=$ipaddr_startnum
diff --git a/sysconfig/network-scripts/ifup-ctc b/sysconfig/network-scripts/ifup-ctc
index 514c102b..e268d7cc 100755
--- a/sysconfig/network-scripts/ifup-ctc
+++ b/sysconfig/network-scripts/ifup-ctc
@@ -33,7 +33,7 @@ timeout=0
 while ! ping -w 30 -c 1 ${GATEWAY} &>/dev/null; do
 	timeout=$(($timeout + 1))
 	if [ $timeout = 20 ]; then
-		echo $"ERROR: ${DEVICE} did not come up!"
+		net_log $"ERROR: ${DEVICE} did not come up!"
 		break
 	fi
 done
diff --git a/sysconfig/network-scripts/ifup-eth b/sysconfig/network-scripts/ifup-eth
index 4d7b8aea..b81234d2 100755
--- a/sysconfig/network-scripts/ifup-eth
+++ b/sysconfig/network-scripts/ifup-eth
@@ -40,7 +40,7 @@ is_available ${REALDEVICE}
 if [ -n "${HWADDR}" ]; then
     FOUNDMACADDR=$(get_hwaddr ${REALDEVICE})
     if [ "${FOUNDMACADDR}" != "${HWADDR}" -a "${FOUNDMACADDR}" != "${MACADDR}" ]; then
-	    echo $"Device ${DEVICE} has different MAC address than expected, ignoring."
+	    net_log $"Device ${DEVICE} has different MAC address than expected, ignoring."
 	    exit 1
     fi
 fi
@@ -48,7 +48,7 @@ fi
 # If the device is a bridge, create it with brctl, if available.
 if [ "${TYPE}" = "Bridge" ]; then
       if [ ! -x /usr/sbin/brctl ]; then
-	  echo $"Bridge support not available: brctl not found"
+	  net_log $"Bridge support not available: brctl not found"
 	  exit 1
       fi
       if [ ! -d /sys/class/net/${DEVICE}/bridge ]; then
@@ -61,7 +61,7 @@ fi
 # If the device is a tap device, create it with tunctl, if available.
 if [ "${TYPE}" = "Tap" ]; then
       if [ ! -x /usr/sbin/tunctl ]; then
-          echo $"Tap support not available: tunctl not found"
+          net_log  $"Tap support not available: tunctl not found"
           exit 1
       fi
       [ -n "${OWNER}" ] && OWNER="-u ${OWNER}"
@@ -71,9 +71,9 @@ fi
 # now check the real state
 is_available ${REALDEVICE} || {
       if [ -n "$alias" ]; then
-         echo $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
+         net_log $"$alias device ${DEVICE} does not seem to be present, delaying initialization."
       else
-         echo $"Device ${DEVICE} does not seem to be present, delaying initialization."
+         net_log $"Device ${DEVICE} does not seem to be present, delaying initialization."
       fi
       exit 1
 }
@@ -219,7 +219,7 @@ else
 	ip link set dev ${REALDEVICE} $(toggle_value arp $ARP)
    
     if ! ip link set dev ${REALDEVICE} up ; then
-	echo $"Failed to bring up ${DEVICE}."
+	net_log $"Failed to bring up ${DEVICE}."
 	exit 1
     fi
 
@@ -250,13 +250,13 @@ else
         if ! LC_ALL=C ip addr ls ${REALDEVICE} | LC_ALL=C grep -q "${ipaddr[$idx]}/${prefix[$idx]}" ; then
             [ "${REALDEVICE}" != "lo" ] && \
             if ! /sbin/arping -q -c 2 -w 3 -D -I ${REALDEVICE} ${ipaddr[$idx]} ; then
-                echo $"Error, some other host already uses address ${ipaddr[$idx]}."
+                net_log $"Error, some other host already uses address ${ipaddr[$idx]}."
                 exit 1
             fi
 
             if ! ip addr add ${ipaddr[$idx]}/${prefix[$idx]} \
               brd ${broadcast[$idx]:-+} dev ${REALDEVICE} ${SCOPE} label ${DEVICE}; then
-                echo $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
+                net_log $"Error adding address ${ipaddr[$idx]} for ${DEVICE}."
             fi
         fi
 
diff --git a/sysconfig/network-scripts/ifup-ipv6 b/sysconfig/network-scripts/ifup-ipv6
index 93a55d6e..478682fb 100755
--- a/sysconfig/network-scripts/ifup-ipv6
+++ b/sysconfig/network-scripts/ifup-ipv6
@@ -97,8 +97,8 @@ if [ "$IPV6FORWARDING" = "yes" ]; then
 
 	# Check, if global IPv6 forwarding was already set by global script
 	if [ $ipv6_global_forwarding_current -ne 1 ]; then
-		echo $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel"
-		echo $"Please restart network with '/sbin/service network restart'"
+		net_log $"Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel"
+		net_log $"Please restart network with '/sbin/service network restart'"
 	fi
 
 	ipv6_local_forwarding=1
@@ -114,8 +114,8 @@ else
 
 	# Check, if global IPv6 forwarding was already set by global script
 	if [ $ipv6_global_forwarding_current -ne 0 ]; then
-		echo $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel"
-		echo $"Please restart network with '/sbin/service network restart'"
+		net_log $"Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel"
+		net_log $"Please restart network with '/sbin/service network restart'"
 	fi
 
 	ipv6_local_forwarding=0
@@ -144,7 +144,7 @@ fi
 if [ "$IPV6_PRIVACY" = "rfc3041" ]; then
 	/sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.use_tempaddr=2 >/dev/null 2>&1
 	if [ $? -ne 0 ]; then
-		echo $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
+		net_log $"Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel"
 	fi
 fi
 
@@ -168,7 +168,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 	ipv6_test_device_status tun6to4
 	if [ $? = 0 ]; then
 		# device is already up
-		echo $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
+		net_log $"Device 'tun6to4' (from '$DEVICE') is already up, shutdown first"
 		exit 1
 	fi
 
@@ -195,7 +195,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 
 	if [ -n "$ipv4addr" ]; then
 		if ! ipv6_test_ipv4_addr_global_usable $ipv4addr; then
-			echo $"Given IPv4 address '$ipv4addr' is not globally usable"
+			net_log $"Given IPv4 address '$ipv4addr' is not globally usable" info
 	                valid6to4config="no"
         	fi
 		if [ -z "$IPV6TO4_RELAY" ]; then
@@ -208,7 +208,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 			valid6to4config="no"
 		fi
 	else
-        	echo $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified"
+        	net_log $"IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified" info
 		valid6to4config="no"
 	fi
 
@@ -223,7 +223,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 
 		if [ -n "$IPV6TO4_MTU" ]; then
 			if [ $IPV6TO4_MTU -gt $tunnelmtu ]; then
-				echo $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored"
+				net_log $"Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored" warning
 			else
 				tunnelmtu=$IPV6TO4_MTU
 			fi
@@ -237,7 +237,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 		# Add default route, if device matches
 		if [ "$IPV6_DEFAULTDEV" = "tun6to4" ]; then
 			if [ -n "$IPV6_DEFAULTGW" ]; then
-				echo $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored"
+				net_log $"Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored" warning
 			fi
 			ipv6_set_default_route $ipv6to4_relay tun6to4
 		fi
@@ -273,7 +273,7 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 	        if [ "$IPV6_CONTROL_RADVD" = "yes" ]; then
 			# RADVD is in use, so forwarding of IPv6 packets should be enabled, display warning
 			if [ $ipv6_global_forwarding_current -ne 1 ]; then
-				echo $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't"
+				net_log $"Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't" warning
 			fi
 
 		        if [ -n "$IPV6TO4_ROUTING" ]; then
@@ -286,17 +286,17 @@ if [ "$IPV6TO4INIT" = "yes" ]; then
 						ipv6_add_addr_on_device ${dev} ${ipv6to4prefix}${suf}
 					done
 				else
-					echo $"Error occurred while calculating the IPv6to4 prefix"
+					net_log $"Error occurred while calculating the IPv6to4 prefix"
 				fi
 			else
-				echo $"radvd control enabled, but config is not complete"
+				net_log $"radvd control enabled, but config is not complete"
 			fi
 
 			# Control running radvd
 			ipv6_trigger_radvd up "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
 		fi
 	else
-		echo $"6to4 configuration is not valid"
+		net_log $"6to4 configuration is not valid"
 		exit 1
         fi
 fi
diff --git a/sysconfig/network-scripts/ifup-sit b/sysconfig/network-scripts/ifup-sit
index 6d1a8c79..498305b7 100755
--- a/sysconfig/network-scripts/ifup-sit
+++ b/sysconfig/network-scripts/ifup-sit
@@ -55,12 +55,12 @@ ipv6_test || exit 1
 
 # Generic tunnel device sit0 is not supported here
 if [ "$DEVICE" = "sit0" ]; then
-	echo $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
+	net_log $"Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking"
 	exit 1
 fi
 
 if [ -z "$IPV6TUNNELIPV4" ]; then
-	echo $"Missing remote IPv4 address of tunnel, configuration is not valid"
+	net_log $"Missing remote IPv4 address of tunnel, configuration is not valid"
 	exit 1
 fi
 
@@ -68,7 +68,7 @@ fi
 ipv6_test_device_status $DEVICE
 if [ $? = 0 ]; then
 	# device is already up
-	echo $"Device '$DEVICE' is already up, please shutdown first"
+	net_log $"Device '$DEVICE' is already up, please shutdown first"
 	exit 1
 fi
 
diff --git a/sysconfig/network-scripts/ifup-tunnel b/sysconfig/network-scripts/ifup-tunnel
index 8fd631e5..c14e0658 100755
--- a/sysconfig/network-scripts/ifup-tunnel
+++ b/sysconfig/network-scripts/ifup-tunnel
@@ -46,14 +46,14 @@ case "$TYPE" in
 	/sbin/modprobe ipip
 	;;
     *)
-	echo $"Invalid tunnel type $TYPE"
+	net_log $"Invalid tunnel type $TYPE"
 	exit 1
 	;;
 esac
 
 # Generic tunnel devices are not supported here
 if [ "$DEVICE" = gre0 -o "$DEVICE" = tunl0 ]; then
-    echo $"Device '$DEVICE' isn't supported as a valid GRE device name."
+    net_log $"Device '$DEVICE' isn't supported as a valid GRE device name."
     exit 1
 fi