Repository scheme updated to new layout

  NOTE: This commit just moves files around, without actually fixing the
        Makefiles and specfile. See follow up commits which resolve this.

1 files changed, 139 insertions, 0 deletions

diff --git a/network-scripts/ifdown-ipv6 b/network-scripts/ifdown-ipv6
new file mode 100755
index 00000000..7ba3efdc
--- /dev/null
+++ b/network-scripts/ifdown-ipv6
@@ -0,0 +1,139 @@
+#!/bin/sh
+#
+# ifdown-ipv6
+#
+#
+# Taken from:
+# (P) & (C) 2000-2004 by Peter Bieringer <pb@bieringer.de>
+#
+#  You will find more information on the initscripts-ipv6 homepage at
+#   http://www.deepspace6.net/projects/initscripts-ipv6.html
+#
+# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
+#
+# Version 2005-09-22
+#
+# Note: if called as (like normally) by /etc/sysconfig/network-scripts/ifdown
+#        exit codes aren't handled by "ifdown"
+#
+# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
+#  DEVICE=<device>
+#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
+#
+# Optional for 6to4 tunneling:
+#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay [default: 192.88.99.1]
+#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup internal interfaces
+#
+# Optional for 6to4 tunneling links to trigger radvd:
+#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering [optional]
+#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/run/radvd/radvd.pid" [optional]
+#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
+#
+#  Required version of radvd to use 6to4 prefix recalculation
+#   0.6.2p3 or newer supporting option "Base6to4Interface"
+#  Required version of radvd to use dynamic ppp links
+#   0.7.0 + fixes or newer
+#
+
+
+. /etc/sysconfig/network
+
+cd /etc/sysconfig/network-scripts
+. ./network-functions
+
+CONFIG=$1
+[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
+source_config
+
+REALDEVICE=${DEVICE%%:*}
+DEVICE=$REALDEVICE
+
+[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
+. /etc/sysconfig/network-scripts/network-functions-ipv6
+
+
+# IPv6 test, no module loaded, exit if system is not IPv6-ready
+ipv6_test testonly || exit 0
+
+# Test device status
+ipv6_test_device_status $DEVICE
+if [ $? != 0 -a $? != 11 ]; then
+    # device doesn't exist or other problem occurs
+    exit 1
+fi
+
+if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
+    # Switch some sysctls to secure mode
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1
+    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1
+fi
+/sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1
+
+# Test status of tun6to4 device
+ipv6_test_device_status tun6to4
+if [ $? = 0 -o $? = 11 ]; then
+    # Device exists
+    valid6to4config="yes"
+
+    if [ -z "$IPV6TO4_RELAY" ]; then
+        IPV6TO4_RELAY="192.88.99.1"
+    fi
+
+    # Get IPv4 address from interface
+    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
+        # Take special configured from config file (precedence 1)
+        ipv4addr="$IPV6TO4_IPV4ADDR"
+
+        # Get IPv4 address from interface first
+        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addrlocal" ]; then
+            # Take configured from config file
+            ipv4addrlocal="$IPADDR"
+        fi
+    else
+        # Get IPv4 address from interface first (has precedence 2)
+        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
+        if [ -z "$ipv4addr" ]; then
+            # Take configured from config file (precedence 3)
+            ipv4addr="$IPADDR"
+        fi
+        ipv4addrlocal="$ipv4addr"
+    fi
+
+    # Get local IPv4 address of dedicated tunnel
+    ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)"
+
+    if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then
+        # no IPv4 addresses given, 6to4 sure not configured
+        valid6to4config="no"
+    else
+        # Check against configured 6to4 tunnel to see if this interface was
+        # used before
+        if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then
+            # IPv4 address of interface does't match local tunnel address,
+            # interface was not used for current 6to4 setup
+            valid6to4config="no"
+        fi
+    fi
+fi
+
+# Shutdown of 6to4, if configured
+if [ "$valid6to4config" = "yes" ]; then
+    if [ -n "$IPV6TO4_ROUTING" ]; then
+        # Delete routes to local networks
+        for devsuf in $IPV6TO4_ROUTING; do
+            dev="${devsuf%%-*}"
+            ipv6_cleanup_6to4_device $dev
+        done
+    fi
+
+    # Delete all configured 6to4 address
+    ipv6_cleanup_6to4_tunnels tun6to4
+
+    # Control running radvd
+    ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
+fi
+
+# Delete all current configured IPv6 addresses on this interface
+ipv6_cleanup_device $DEVICE