# translation of DrakX-uk.po to ukrainian # Ukrainian translation of drakbootdisk # Copyright (C) 2000,2003 Free Software Foundation, Inc. # Dmytro Kovalov , 2000. # Taras Boychuk , 2003. # msgid "" msgstr "" "Project-Id-Version: DrakX-uk\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: 2003-09-22 13:34+0300\n" "Last-Translator: Taras Boychuk \n" "Language-Team: ukrainian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Сканування розділів для знаходження точок монтування" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "якщо встановлено в так, перевіряє додатки/переміщувані файлів адміністратора." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s потребує назву машини, MAC-адресу, IP, nbi-образ, 0/1 для " "THIN_CLIENT, 0/1 для Local Config...\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "Конфігурацію змінено - перезапустити clusternfs/dhcpd?" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "\t\tВитерти=%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Різницеві резервування зберігають тільки файли, які були змінені, або є " "новими після базового резервування." #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "мережевий порт друкарки" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "Будь ласка, вставте дискету:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "DrakTermServ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Копія таблиці розділів має інший розмір.\n" "Все-таки продовжувати?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "Яке ім'я користувача" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Який тип вводу Ви хочете додати?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "Відновити таблицю розділів" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "Налаштувати назву машини..." #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "На сервер CUPS \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Налаштування після встановлення" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" "Поточний рівень безпеки - %s\n" "Виберіть права доступу для перегляду/редактування" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Замість цього скористайтеся ``%s''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Тип" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Крім того, друкарки, сконфіґуровані за допомогою наданих виробниками\n" "файлів PPD чи рідних драйверів CUPS, не можуть бути перенесеними." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Шрі Ланка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Наступна друкарка\n" "\n" "%s%s\n" "вже приєднана до Вашої системи" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Центрально-Африканська Республіка" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Шлюзовий пристрій" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "Додаткові вподобання" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "Метод мережі:" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "Плата Ethernet" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "якщо встановлено, відсилає поштове повідомлення на цю поштову адресу, ще " "відсилає його rootу" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Параметри" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "ні" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "Користуватися автовизначенням" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Інтерфейс:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Виберіть тип встановлення" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Здається, система не підключена до інтернету.\n" "Спробуйте змінити конфігурацію свого з'єднання." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Приєднайте Вашу друкарку до лінакс-сервера і дайте дозвіл Вашим Віндовс-" "машинам приєднатися до нього як клієнти.\n" "\n" "Ви дійсно хочете продовжити встановлення цієї друкарки?" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Білорусь" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Помилка при записі у файл %s" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "Відсилати результати перевірки в системний журнал" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd служить для контролю за рівнем батареї та запису повідомлень про\n" "це у системний журнал syslog. Крім цього, він може вимикати комп'ютер,\n" "коли батарея розрядилася." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "Використовувати плівку для резервування" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Ці пакунки буде встановлено" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "Конфіґурація CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Total progress" msgstr "Загальний поступ" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Недостатньо вільного простору для розташування нових розділів" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Переміщення" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Активність Drakbackup через %s:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "так" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "(" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Ласкаво просимо до Помічника встановлення мережі.\n" "\n" "Зараз Ваша мережа та з'єднання з інтернетом будуть налаштовані. Якщо Ви не\n" "хочете користуватись автоматичним визначенням, відмініть вибір.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr ")" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Ліван" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "Зупинити" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "Редактувати вибрану машину" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "Не задано жодного КД-пристрою!" #: ../../network/shorewall.pm:1 #, fuzzy, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" "Будь-ласка, введіть назву інтерфейсу, під'єднаного до інтернету.\n" "\n" "Приклади:\n" "\t\tppp+ для модемних або DSL з'єднань, \n" "\t\teth0 або eth1 для кабельного з'єднання, \n" "\t\tippp+ для isdn з'єднання.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tВикористовувати файли .backupignore\n" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "Болгарська (фонетична)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "Стартова IP-адреса DHCP" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 кб" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "Не перемотувати плівку після резервування" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Основні параметри завантажувача" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "Плівка" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Малайзія" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "Вивчається мережа..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "З цим параметром Ви зможете відновити будь-яку версію\n" "Вашої теки /etc." #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "Зміни виконано, Ви хочете перезапустити сервіс dm?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Швейцарська (французька розкладка)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "збій у mkraid (можливо, не встановлені raidtools?)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "Серпень" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "FTP server" msgstr "Сервер NTP" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "Веб-камера" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "розмір кешу процесора другого рівня" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "Звукова плата" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "Місяць" #: ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "Шукати файли для відновлення" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Люксембург" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Щоб роздрукувати файл з командного рядка (вікна терміналу), використайте " "команду \"%s \".\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Рівень %s\n" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "Сірійська (фонетична)" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "Іран" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Шина" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Ірак" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to %s ..." msgstr "з'єднання з %s ..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "В даній конфігурації %s знайдено потенційний конфлікт адреси мережі!\n" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Встановлюється конфігурація..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Для найсучасніших TV-карт модуль bttv ядра GNU/Linux точно автовизначає " "правильні параметри.\n" "Якщо Вашу карту визначено неправильно, Ви можете вказати правильний тюнер і " "тип карти тут. Просто виберіть параметри TV-карти, які потрібно." #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Пароль (ще раз)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "Пошук встановлених шрифтів" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "Типова стільниця" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" "Щоб відправити звіт про помилку, натисніть на кнопку звіту.\n" "Це відкриє вікно переглядача тенет на %s,\n" "де Ви знайдете форму для заповнення. Інформацію, подану вище\n" "буде відправлено на цей сервер." #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Венесуела" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP-адреса" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Виберіть розміри" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Список даних пошкоджено:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Може бути змонтований тільки явно (тобто параметр -a\n" "не монтує систему автоматично)." #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Ваш модем не підтримується системою.\n" "Проконсультуйтусь на http://www.linmodems.org" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Створити інший розділ" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "Поточний користувач" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "Ім'я користувача" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "Ліва клавіша \"Windows\"" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Ґаяна" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "Налаштування сервера dhcp" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Використовується текою:\n" "тільки власник теки або файл з неї може його видалити" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " на сервер Novell \"%s\", друкарка \"%s\"" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Name" msgstr "Назва друкарки" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Забрати модуль" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Пароль" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "Додаткові налаштування" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Вивчення Вашого багатофункціонального пристрою HP" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Root" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Виберіть існуючий RAID, до якого додати" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Турецька (традиційна \"Q\" модель)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "Повідомлення lilo не знайдено" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Автоматичне створення файлів заголовків для ядра в теці /boot для\n" "/usr/include/linux/{autoconf,version}.h" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "якщо потрібно" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "Відновлення невдале..." #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Зберігати пароль для цієї системи в конфігурації drakbackup." #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Вступ\n" "\n" "Операційна система та різноманітні компоненти, які входять в\n" "дистрибутив Лінакс Мандрейк, надалі називаються \"Програмні\n" "продукти\". Програмні продукти включають, але не тільки, набори\n" "програм, методів, правил та документації, які мають відношення до\n" "операційної системи та різноманітних складових частин дистрибутива\n" "Лінакс Мандрейк.\n" "\n" "1. Ліцензійна угода\n" "\n" "Будь ласка, прочитайте цю угоду уважно. Цей документ є ліцензійною\n" "угодою між Вами та MandrakeSoft S.A., яка стосується програмних\n" "продуктів. Встановленням, дублюванням чи використанням Програмних\n" "продуктів будь-яким чином, Ви явно приймаєте та повністю\n" "погоджуєтесь з умовами даної Ліцензії. Якщо Ви не погоджуєтесь з\n" "будь-якою частиною Ліцензійної угоди, Вам не дозволяється\n" "встановлювати, дублювати чи користуватися Програмним\n" "продуктом. Будь-яка спроба встановлення, дублювання чи використання\n" "Програмного продукту чином, який не відповідає умовам Угоди, визнається\n" "порушенням Угоди, і тим самим Ви позбавляєтесь прав за цією\n" "Угодою. Після припинення дії цієї Угоди Ви повинні негайно знищити\n" "всі копії Програмних Продуктів.\n" "\n" "2. Обмежена гарантія\n" "\n" "Програмні продукти та доповнююча документація поставляються \"як є\",\n" "без гарантії, в межах встановлених законодавством. Ні за яких умов\n" "MandrakeSoft S.A. не буде нести відповідальності, в межах встановлених\n" "законодавством, за випадкові, прямі чи опосередковані (включаючи, але\n" "не обмежуючись втратами чи перепинами бізнесу, фінансовими втратами,\n" "адвокатськими витратами чи штрафами як результат присуду судової\n" "інстанції, чи будь-які інші втрати), що походять від використання,\n" "або, навпаки, від неможливості використання Програмного продукту, навіть\n" "у випадку, якщо MandrakeSoft S.A. повідомляло про можливості таких\n" "втрат.\n" "\n" "ОБМЕЖЕННЯ ВІДПОВІДАЛЬНОСТІ, ЗАЛЕЖНОЇ ВІД ОБЛАДАННЯ АБО\n" "ВИКОРИСТАННЯ ЗАБОРОНЕНИХ ПРОГРАМНИХ ПРОДУКТІВ В ДЕЯКИХ\n" "КРАЇНАХ\n" "\n" "В межах, встановлених законодавством, MandrakeSoft S.A. чи його\n" "дистрибютори ні за яких умов не несуть відповідальності за жодне\n" "навмисне, випадкове, пряме чи опосередковане пошкодження, (включаючи\n" "але не обмежуючись перешкодами для бізнесу, припиненням бізнесу,\n" "фінансовими втратами, адвокатськими витратами чи штрафами як\n" "результат присуду судової інстанції, чи будь-якими іншим втратами),\n" "які виникають від обладання чи використання програмних компонентів чи\n" "виникають від завантаження заборонених законодавством чи обмежених до\n" "використання в деяких країнах програмних компонент по мережі з однієї\n" "з домашніх сторінок Лінакс Мандрейк. Ця обмежена відповідальність\n" "включає також (але не обмежується) так званими сильними\n" "криптографічними методами, які включені в Програмний продукт.\n" "\n" "3. Ліцензія GPL та подібні\n" "\n" "Програмні продукти складаються із складових, розроблених різними\n" "фізичними чи юридичними особами. Більшість компонент виконано\n" "відповідно до умов загальної публічної ліцензії GNU (GNU General\n" "Public Licence), яка надалі в даному документі називається GPL,\n" "або подібними до даної ліцензіями. Більшість\n" "з цих ліцензій дозволяють використання, дублювання, прийняття та\n" "перерозповсюдження складових частин, які вони регулюють. Будь-ласка,\n" "ознайомтесь уважно з термінами та умовами ліцензійних умов для кожної\n" "складової частини, перш ніж використовувати будь-яку з\n" "частин. Будь-які запитання стосовно ліцензії на окрему складову\n" "частину мають адресуватися автору цієї складової частини, а не до\n" "MandrakeSoft. Програми, розроблені MandrakeSoft S.A., керуються\n" "ліцензією GPL. Документація, розроблена MandrakeSoft S.A,. керується\n" "спеціальною ліцензією. Зверніться, будь-ласка, до документації за\n" "подробицями.\n" "\n" "4. Права інтелектуальної власності\n" "\n" "Всі права на складові компоненти Програмних продуктів належать\n" "відповідним авторам і захищені законами про інтелектуальну власність\n" "на програмне забезпечення.\n" "MandrakeSoft S.A. залишає за собою право змінювати чи\n" "адаптувати Програмні продукти як в цілому, так і окремими частинами з\n" "будь-якою метою і для будь-яких цілей. \"Mandrake\", \"Mandrake Linux\" та\n" "відповідні логотипи є торгjвельними марками MandarakeSoft S.A.\n" "\n" "5. Законодавство\n" "\n" "Якщо будь-який розділ цієї угоди буде признано недійсним, таким, що не\n" "відповідає законодавству чи невідповідним згідно судової постанови, цей\n" "розділ угоди видаляється з даного контракту. Ви залишаєтесь зв'язаними\n" "іншими розділами цієї угоди, які ще мають дію. Терміни та\n" "умови цієї Ліцензії керуються Законодавством Франції. Всі спірні\n" "питання щодо термінів та умов цієї ліцензії будуть розв'язуватися по\n" "можливості поза межами судових установ. В крайніх випадках спірні\n" "питання будуть вирішуватися відповідним Судом Парижа - Франція.\n" "\n" "З будь-якими питаннями щодо цього документа звертайтеся, будь-ласка,\n" "до MandrakeSoft S.A.\n" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "Типовий користувач" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "координата x верхнього лівого\n" "кута індикатора поступу" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "Поточна конфігурація інтерфейса" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Якщо Ви маєте плату ISA, значення на наступному екрані мають бути\n" "коректними.\n" "\n" "Якщо Ви маєте плату PCMCIA, Ви повинні знати IRQ та IO Вашої плати.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "Не друкувати тестової сторінки" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "Ґурмухі" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "%s вже використовується\n" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "Заборонити APIC" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Цей пароль занадто короткий (він повинен бути завдовжки хоча б %d літер)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "[клавіатура]" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "Проксі FTP" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "Список встановлення" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "Змінити\n" "Шлях відновлення" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "Показувати лише для виділеного дня" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tОбмежити використання диску до %s Mб\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 кб" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Зауваження: паралельні порти не можуть бути автовизначені)" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Який тип картки Ви маєте?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Безпека" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Також Ви можете використовувати графічний інтерфейс \"xpdq\" для " "встановлення параметрів і керування чергою друку.\n" "Якщо Ви використовуєте KDE як оточення стільниці, Ви матимете \"кнопку зупину" "\", іконку на стільниці, підписану \"Зупинити друкарку\", яка зупинятиме всі " "завдання друку негайно, як тільки Ви на неї натиснете. Це, для прикладу, " "може використовуватися при заминаннях паперу.\n" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakbackup:1 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Неможливо знайти резервні копії для відновлення...\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "Невідомий" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Цей сервер вже знаходиться в списку, його не можна додати знову.\n" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Конфігурація мережі" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Протокол для всього іншого світу \n" " без D-каналу (виділених ліній)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ налаштує цей файл для роботи в поєднанні з " "образами, створеними\n" " \t\tmkinitrd-net і записами в /etc/dhcpd.conf для обслуговування " "образа завантаження кожного\n" " \t\tбездискового клієнта.\n" "\n" " \t\tТиповий вигляд конфігураційного файла tftp:\n" " \t\t\n" " \tservice tftp\n" " \t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tТут відмінність від типового встановлення полягає в зміні " "прапорця disable на\n" " \t\t'no' і зміні шляху теки на /var/lib/tftpboot, де mkinitrd-net\n" " \t\tрозміщує свої образи." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "Параметр %s має бути числом!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "Повідомлення" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Ви не сконфігурували X. Ви впевнені, що дійсно цього хочете?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "Конфігурацію друкарки буде здійснено повністю автоматично. Якщо Вашу " "друкарку не буде коректно визначено, або якщо Ви надаєте перевагу " "налаштуванню друкарки вручну, поверніться до \"Налаштування вручну\"." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Який тип розбиття на розділи?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "список файлів, посланий по FTP: %s\n" " " #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "Інтерфейс" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "Багатосесійний КД" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "розділені комою рядки" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Це перелік машин, з яких можна використовувати сканери:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "Повідомлення" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Невідомий|CPH06X (bt878) [багато виробників]" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "Сервери POP і IMAP" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Мексика" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "Покращення моделі" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Руанда" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Швейцарія" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Брунейський Даруссалам" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Чи Ви маєте які-небуть %s інтерфейси?" #: ../../standalone/drakTermServ:1 #, c-format msgid "You must be root to read configuration file. \n" msgstr "" "Ви повинні зареєструватися як root, щоб прочитати конфігураційний файл. \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Параметри віддаленої lpd-друкарки" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux - багатокористувацька система, це означає, що кожен з\n" "користувачів може мати свої власні установки, власні файли, тощо. Щоб\n" "більше дізнатися про це, Ви можете прочитати Підручник користувача з\n" "системи. Але на відміну від користувача Root, який є адміністратором\n" "системи, користувачі, яких Ви будете створювати на цьому кроці, не\n" "мають права змінювати нічого в системі, крім своїх власних файлів і\n" "власної конфіґурації. Ви маєте створити рахунок для хоча б одного\n" "єдиного користувача - для самого себе. Ви будете користуватися цим\n" "рахунком для того, щоб виконувати щоденні задачі. І хоча це і дуже\n" "зручно реєструватись в системі як Root, але одночасно це і дуже\n" "небезпечно! Найменша помилка може призвести до того, що система буде\n" "неробочою. Якщо Ви помилитесь як звичайний користувач, Ви можете,\n" "звичайно, втратити деякі свої дані, але не всю систему.\n" "\n" "Перше поле запитує Ваше справжнє ім'я. Звичайно ж, воно не обов'язкове,\n" "Ви можете надрукувати все, що завгодно. DrakX візьме перше слово з цього\n" "поля і скопіює його в поле \"%s\", яке є ім'ям користувача, під яким " "користувач\n" "буде реєструватись у системі. Якщо захочете, Ви можете змінити це ім'я. \n" "Потім Вам потрібно ввести пароль. З міркувань безпеки системи пароль\n" "звичайного (не root) користувача не є таким критичним, як пароль \n" "адміністратора, але все-одно немає причин для того, щоб нехтувати ним,\n" "залишаючи його порожнім або надто простим: врешті-решт, це загрожує\n" "Вашим власним файлам. \n" "\n" "Після того, як Ви натиснете кнопку \"%s\", Ви можете додати ще багато \n" "інших користувачів. Додайте користувача для кожного з Ваших друзів:\n" "для тата й сестри, наприклад. Після того, як Ви закінчили додавати\n" "користувачів, натисніть \"%s\".\n" "\n" "Натиснувши на кнопку \"%s\", Ви зможете змінити типову командну оболонку\n" "для кожного користувача (типова оболонка - bash). \n" "Коли Ви закінчите додавати користувачів, Вам буде запропоновано вибрати\n" "користувача, який буде автоматично реєструватися в системі при стартуванні\n" "комп'ютера. Якщо така можливість Вас цікавить (і не надто турбує про\n" "локальну безпеку), виберіть користувача і менеджер вікон, тоді натисніть " "на \n" "\"%s\". Якщо Вас така можливість не цікавить, відмініть вибір \"%s\"." #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Налаштувати доступ до інтернету..." #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "Будь-ласка, вкажіть інтервал часу між кожним резервуванням" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Норвегія" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "Стерти профіль" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Датська" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Автоматично увімкнути NumLock на консолі і в XFree \n" "при завантаженні." #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Введіть, будь-ласка, конфігурацію IP для цієї машини. Кожен пункт\n" "треба вводити як IP-адресу в точково-десятковій нотації\n" "(наприклад, 1.2.3.4)" #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "Дистрибутив Мандрейк Лінакс розміщений на кількох компакт-дисках.\n" "DrakX знає, коли вибрані пакунки знаходяться на інших компакт-\n" "дисках, тоді він викине поточний компакт-диск і попросить вставити\n" "потрібний." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "Коли вибрано, власника і групу неможливо буде змінити" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Болгарія" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "Вівторок" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "Процесорів" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Острови Свальбард і Ян Майєн" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "Не вибрано мережевої плати!" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Під час налаштування сталася проблема.\n" "Перевірте з'єднання з допомогою net_monitor або mcc. Якщо Ваше з'єднання не " "працює, Ви можете перезапустити налаштування." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "розділ %s відомий, як %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "Резервувати інші файли..." #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "Конго (Кіншаса)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "IP-адреса SMB-сервера" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Таблицю розділів диску %s буде записано на диск!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "Встановлення пакунка HPOJ..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Спеціально створений диск для завантаження забезпечить Вам можливість\n" "запуску системи незалежно від звичайного завантажувача. Це може\n" "знадобитися у тих випадках, коли Ви не бажаєте встановлювати LILO (або\n" "grub) в своїй системі, або коли інша операційна система видаляє\n" "LILO, або коли LILO не працює з новою конфігурацією апаратних\n" "засобів. Аварійний диск може також використовуватися разом з Mandrake\n" "аварійним диском, що робить відновлення від серйозних системних крахів\n" "набагато простішим. Чи бажаєте Ви створити аварійний диск для своєї\n" "системи?\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Служба звітів DrakBackup\n" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Латвійська" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "щомісяця" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Retry" msgstr "Відновити" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Назва модуля" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "Стартувати при завантаженні" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "Використовувати наростаючі резервування" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Перший сектор диску (MBR)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Сальвадор" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "Джойстік" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "DVD" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "Використовувати Unicode типово" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "модуль в ядрі GNU/Linux, який керує пристроєм" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Is your hardware clock set to GMT?" msgstr "Годинник встановлено в GMT" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Пробую відновити таблицю розділів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "Параметр %s має бути цілим числом!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "Використовувати пароль для розпізнавання користувачів" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Пункти, які Вам потрібно заповнити:\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "При резрвуванні на інші носії файли всеодно створюються на твердому диску, " "тоді переміщуються на інший носій. При виборі цього параметра tar-файл після " "резервування буде видалятися з твердого диску." #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Не можу почати поновлення!!!\n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Назва: " #: ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 мільйонів кольорів (24 біт)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "Дозволити всіх користувачів" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "Офіційний магазин MandrakeSoft" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Зміна розміру" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Введіть найбільший розмір,\n" " дозволений для Drakbackup( Мб)" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Кабельне з'єднання" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "Користувач" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Зробити нове резервування перед відновленням (тільки для наростаючих " "резервувань)." #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "збій у mkraid" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "Назва" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Емуляція 3-ї кнопки" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "Помітити додатки/переміщувані файлів sgid" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "Відсилання файлів..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Ізраїльська (фонетична)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "доступ до засобів rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Вам потрібно вибрати/ввести друкарку/пристрій!" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "Проблема з правами доступу до КД." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Номер телефона" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Помилка: Драйвера \"%s\" для Вашої звукової карти немає в списку" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "Назва, опис, розташування друкарки" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "США (широке мовлення)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Користуватися розширенням Xinerama" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Зворотнє монтування" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "Західна Європа" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "на CDROM" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" "[ПАРАМЕТРИ] [НАЗВА_ПРОГРАМИ]\n" "\n" "ПАРАМЕТРИ:\n" " --help - вивести цю довідку.\n" " --report - програма повинна бути з набору інструментів Мандрейк\n" " --incident - програма повинна бути з набору інструментів Мандрейк" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "Harddrake2 версії %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "Вподобання" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Свазіленд" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Домініканська Республіка" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "Копіювання %s" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "Вибрати колір" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "Сірійська" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "Встановити код користувача (КК)" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "Виберіть твердий диск, який Ви хочете відформатувати для\n" "створення нового розділу Лінакс Мандрейк. Будьте обережні,\n" "всі дані, що знаходяться в цьому розділі, будуть втрачені і їх\n" "неможливо буде відновити!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Звичайна 2-х кнопкова миша" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Вибрати \"%s\" для виконання файла" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Спочатку зітріть логічні томи\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund." #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "Неможливо записати /etc/sysconfig/bootsplash\n" "Файла не знайдено." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Доступ до інтернету" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "Координата y текстового вікна\n" "в кількостях символів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Щоб отримати список можливих параметрів для даної друкарки, натисніть кнопку " "\"Список параметрів друкарки\"." #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Вмикаю сервери..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Друкую тестову сторінку(сторінки)..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Передавання завершене\n" "Якщо Ви хочете перевірити, зареєструйтеся на сервері, використовуючи:\n" "\n" "ssh -i %s %s@%s\n" "\n" "без запиту пароля." #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Вже є розділ з точкою монтування %s\n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Увімкнути/вимкнути щогодинну перевірку безпеки msec." #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "Тепер потрібно вирішити, де саме Ви б хотіли встановити систему\n" "Мандрейк Лінакс на твердому диску. Якщо твердий диск порожній, або\n" "якщо існуюча операційна система використовує весь простір, Вам потрібно\n" "буде перерозподілити диск. Фактично перерозподіл твердого диску полягає\n" "в логічному його розділенні, щоб створити місце для встановлення Мандрейк\n" "Лінакса.\n" "\n" "Через те, що процес перерозбиття твердого диску звичайно є незворотнім і\n" "може призвести до втрати даних, якщо іншу операційну систему вже\n" "було встановлено, ця операція може бути відлякуючою і стресовою, якщо\n" "Ви є недосвідченим користувачем. На щастя, DrakX має помічника, який\n" "спрощує цей процес. Перед продовженням цього кроку прочитайте до кінця\n" "цього розділу і, що головне, приділіть трохи часу.\n" "\n" "В залежності від конфігурації Вашого твердого диску можливі кілька " "варіантів\n" "продовження:\n" "\n" " * \"%s\": цей режим виконує автоматичне розбиття на розділи Вашого\n" "порожного диску (дисків). Якщо Ви вибрали цю команду, інших запитань\n" "до Вас вже не буде.\n" "\n" " * \"%s\": Помічник виявив один або більше розділів Лінакс на Вашому\n" "твердому диску. Якщо Ви хочете використати їх, виберіть цей режим.\n" "Тоді Вам буде запропоновано вказати відповідні до кожного розділу точки\n" "монтування. Попередні точки монтування будуть показані типово і у\n" "більшості випадків залишити їх без змін буде прийнятним варіантом.\n" "\n" " * \"%s\": якщо на Вашому твердому диску встановлено Microsoft Windows\n" "і він займає весь простір на ньому, Вам потрібно буде створити вільне\n" "місце для Лінакса. Щоб зробити це, Ви можете стерти всі розділи Microsoft\n" "Windows і дані (дивись команду ``Стерти весь диск''), або змінити розмір\n" "розділу Microsoft Windows FAT. Зміна розміру буде здійснена без втрати\n" "будь-яких даних, які знаходяться на попередньо дефрагментованому розділі\n" "Windows формату FAT. Дуже рекомендується зробити резервну копію\n" "Ваших даних. Використання цього режиму рекомендується, якщо Ви хочете\n" "використовувати Лінакс Мандрейк і Майкрософт Віндовс на одному комп'ютері.\n" "\n" " Перед вибором цього режиму зрозумійте, що після виконання цієї процедури\n" "розмір розділу Microsoft Windows стане меншим, ніж до цього. Ви будете мати\n" "менше вільного місця у Microsoft Windows на зберігання даних і встановлення\n" "нових програм.\n" "\n" " * \"%s\": якщо Ви хочете стерти всі дані і всі розділи, які є на твердому\n" "диску і замінити їх новою системою Мандрейк Лінакс,\n" "виберіть цей режим. Будьте уважні, бо підтвердивши цей\n" "вибір, Ви вже не зможете повернутись назад.\n" "\n" " !! Якщо Ви виберете цей режим, всі дані на твердому диску будуть " "видалені. !!\n" "\n" " * \"%s\": це просто зітре повністю весь диск і почне свіжий\n" "поділ на розділи. Всі дані на диску буде втрачено.\n" "\n" "!! Якщо Ви виберете цей режим, всі дані на диску будуть втрачені. !!\n" "\n" " * \"%s\": виберіть цей режим, якщо Ви хочете вручну перерозподілити\n" "простір на Вашому твердому диску. Однак будьте обережними, це --\n" "потужний, але дуже небезпечний вибір, Ви можете дуже легко втратити\n" "всі дані. Тому цей режим насправді рекомендується тоді, якщо Ви вже\n" "щось подібне робили або маєте певний досвід. Для детальнішої інформації,\n" "як використовувати інструмент DiskDrake, звертайтеся до розділу\n" "``Managing Your Partitions '' в ``Starter Guide''." #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Україна" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "Програма:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Зовнішній модем ISDN" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "якщо встановлено в Так, то повідомити результат перевірки поштою." #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Ваш вибір? (типово %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "Вирішення проблем" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Тестова сторінка передана програмі друку.\n" "Перед тим, як друкарка почне друкувати, можливо пройде \n" "деякий час.\n" "Статус друку:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "щоденно" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "і одна невідома друкарка" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "Ірландія" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " Відновити конфігурацію " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "Це правильні установки?" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Зараз Ви встановите з'єднання інтернет/мережа. Якщо Ви хочете з'єднати\n" "свій комп'ютер з інтернетом або з місцевою мережею, натисніть \"%s\".\n" "Лінакс Мандрейк спробує автоматично визначити мережеві пристрої\n" "і модеми. Якщо це автовизначення завершується невдало, зніміть вибір\n" "\"%s\". Також Ви можете вибрати не налаштовувати мережу, або зробити\n" "це пізніше, в цьому випадку, натиснувши \"%s\", Ви перейдете до наступного\n" "кроку.\n" "\n" "При налаштуванні мережі можливими параметрами з'єднання є:\n" "звичайний модем, модем ISDN, з'єднання ADSL, кабель-модем і просте\n" "LAN-з'єднання (Ethernet).\n" "\n" "Ми не будемо конкретизувати кожен параметр - просто переконайтеся,\n" "що Ви маєте всі параметри, такі, як IP-адреса, шлюз, DNS-сервери і т.і.\n" "від провайдера інтернет або системного адміністратора.\n" "\n" "Ви можете звернутися до розділу ``Starter Guide'' про з'єднання з інтернет\n" "за детальною інформацією про конфігурацію, чи просто\n" "зачекайте, поки система встановиться і скористайтесь програмою,\n" "описаною там для встановлення конфіґурації з'єднання тенет." #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "Конфігурація Помічника" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Автотест" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "якщо встановлено в так, перевіряє :\n" "\n" "- порожні паролі,\n" "\n" "- чи є паролі в /etc/shadow\n" "\n" "- чи є користувачі з 0 id, іншим, ніж root." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "Резервування системних файлів..." #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Не можу використовувати трансляцію без NIS-домена" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "Вилучаю друкарку \"%s\" ..." #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "Розмір історії командної оболонки" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Будь-ласка, зауважте, де розміщений файл auto_install.cfg.\n" "\n" "Залиште його порожнім, якщо Ви не хочете задавати режиму\n" "автоматичного встановлення.\n" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on other machines" msgstr "Налаштовано на іншій машині" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "інформаційний рівень, який може бути досягнутий інструкцією cpuid" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Перу" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr " на пристрої: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Стерти Windows(TM)" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Стартує сервер шрифтів для X (обов'язковий для роботи\n" "сервера XFree)." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Більшість із цих величин отримана\n" "від Вашої працюючої системи.\n" "Якщо потрібно, можете виправити." #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Виберіть файл шрифта або теку і клацніть на Додати " #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Мадагаскар" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "Cron не доступний для не-root" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "Система" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "Ви хочете використовувати цю можливість?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "Арабський" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Параметри:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "Потрібний пароль" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d хвилин" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Відеоплата: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "Переміщення WebDAV завершилося невдало!" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Налаштування XFree" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Виберіть дію" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Французька Полінезія" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "Здебільшого DrakX не має проблем при визначенні кількості кнопок на\n" "Вашій миші. Якщо це стається, приймається, що Ви маєте двохкнопкову\n" "мишу, і можете сконфігурувати її для емуляції третьої кнопки. Третя кнопка\n" "на двохкнопковій миші може бути ``натиснута'' одночасним натисканням\n" "лівої і правої кнопок. DrakX автоматично знатиме, який інтерфейс " "використовує\n" "Ваша миша, PS/2, послідовний чи USB.\n" "\n" "Якщо з певних міркувань Ви хочете задати інший тип миші, виберіть його\n" "із списку, який пропонується.\n" "\n" "Якщо Ви вибрали мишу, відмінну від запропонованої, буде показано тестовий\n" "екран. Перевірте кнопки і коліщатко, щоб переконатися, що миша працює " "добре.\n" "Якщо миша працює неправильно, натисніть пробіл або [Return], щоб покинути\n" "тест і повернутися в список вибору.\n" "\n" "Миші з коліщатком деколи не визначаються автоматично, тому Вам буде\n" "потрібно вибрати мишу із списку. Переконайтеся, що Ви вибираєте мишу\n" "відповідно до порта, до якого вона під'єднана. Після того, як Ви виберете\n" "мишу і натиснете на кнопку \"%s\", на екрані появиться зображення миші.\n" "Покрутіть коліщатко миші, щоб переконатися, що воно активізоване правильно.\n" "Після того, як Ви побачите, що коліщатко на екрані рухається відповідно\n" "до коліщатка на миші, протестуйте кнопки і переконайтеся, що вказівник миші\n" "на екрані рухається відповідно до переміщення миші." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Підтримка для OKI 4w і сумісних win-друкарок." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Файли або шаблони, перелічені у файлі .backupignore у верхній частині дерева " "тек, не будуть резервовані." #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Запуск звукової системи ALSA (Advanced Linux Sound Architecture)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Встановлюю драйвер для %s плати %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Ви перенесли Вашу колишню основну друкарку (\"%s\"). Залишити\n" "цю друкарку основною і в новій системі друку %s?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "Увімкнути сервер" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Українська" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Доступу до мережі немає і не може бути увімкненим. Будь-ласка, перевірте " "конфігурацію і обладнання. Після цього знову налаштуйте свою віддалену " "друкарку." #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Виберіть \"%s\" для запису у файл" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Вставте системну дискету в дисковод %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "Місцева мережа" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "Видалити Віндовс" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "Ваш %s було налаштовано.\n" "Тепер Ви можете сканувати документи з допомогою \"XSane\" з меню програм " "Мультимедіа/Графіка." #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "Контролери Firewire" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "Після того, як налаштуєте основні параметри завантажувача, буде\n" "показано список параметрів завантаження, які використовуватимуться\n" "при завантаженні.\n" "\n" "Якщо існують інші операційні системи, вже встановлені на Вашій машині,\n" "вони будуть автоматично додані до меню завантаження. Ви можете підправити\n" "існуючі пункти, натиснувши \"%s\" для створення нового пункту; вибрати\n" "пункт і натиснути \"%s\" або \"%s\" для його зміни або видалення. \"%s\" \n" "підтверджує зміни.\n" "\n" "Ви, можливо, також захочете закрити доступ до цих операційних систем\n" "іншим, в цьому випадку Ви можете стерти відповідні пункти в файлі\n" "конфіґурації. Але в цьому випадку Вам потрібна буде спеціальна\n" "дискета, щоб завантажити ці системи!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Системний режим" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Для того, щоб друкувати на друкарці NetWare, Ви повинні вказати назву " "сервера друку (зауважте, вона може відрізнятися від TCP/IP назви машини!) " "разом з назвою друкарки, якою Ви хочете користуватися, та відповідним іменем " "користувача з паролем." #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Маска мережі:" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "Зробити це пізніше" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Приєднати" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "Поновити список друкарок (відобразити всі віддалені CUPS-друкарки)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Коли цей параметр увімкнено, то при кожному запуску CUPS автоматично " "виконується:\n" "\n" "- якщо встановлено LPD/LPRng, то /etc/printcap не перезаписується CUPS\n" "\n" "- якщо немає /etc/cups/cupsd.conf, то створюється\n" "\n" "- коли інформація з друкарки транслюється, вона не містить \"localhost\" як " "назву сервера.\n" "\n" "Якщо деякі з цих перевірок створюють для Вас проблеми, вимкніть цю опцію, " "але тоді Ви повинні самі потурбуватися про ці пункти." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Якщо потрібно, автовстановлення може бути повністю\n" "автоматизоване. В цьому випадку процес встановлення \n" "буде мати повний контроль над вашим диском!! (Застосовується\n" "для встановлення на інші комп'ютери)\n" "\n" "Можливо, Ви захочете повторити встановлення.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Мережева друкарка \"%s\", порт %s" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Виберіть, будь-ласка, адаптер, який буде під'єднано до місцевої мережі." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "Гаразд для відновлення інших файлів." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "Будь-ласка, виберіть розкладку клавіатури." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "Адреса пристрою друкарки" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "Інформація на цьому носії не стирається!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "На основі термінала" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Увімкнути/Вимкнути захист від маскування IP." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Встановлюю систему друкування на рівні безпеки %s" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "Ім'я користувача занадто довге" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Інші операційні системи (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "Віддалений сайт WebDAV вже синхронізується!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Читаю базу даних друкарок..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Створити дискету для автовстановлення" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t ім'я користувача: %s\n" "\t\t в теку: %s \n" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Сомалі" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "Немає драйвера з відкритим кодом" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "Def." #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Подібний до попереднього рівня, але тепер система є повністю закритою і всі " "режими безпеки на найвищому рівні." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Нікарагуа" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Нова Каледонія" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "Європейський протокол (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/Вилучити" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Відео-режим" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Оман" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "Будь-ласка, введіть нижче Вашу електронну адресу" #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "Слідкування за мережею" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Новий розмір в Мб: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Тип таблиці розділів: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "Автентикація домену Віндовс" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "Клавіатура США" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Емуляція кнопок" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", мережева друкарка \"%s\", порт %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Робота Drakbackup на плівку:\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Проблема з'єднання по FTP: неможливо відіслати Ваші зарезервовані файли по " "FTP.\n" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "Швидкість відсилання:" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Класична програма тестування звуку виконується з наступними командами:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" повідомить Вам, який драйвер типово\n" "використовує Ваша карта\n" "\n" "- \"grep sound-slot /etc/modules.conf\" повідомить Вам, який драйвер\n" "використовується зараз\n" "\n" "- \"/sbin/lsmod\" зробить можливою перевірку, чи драйвер карти " "завантажений,\n" "чи ні\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" " "повідомить\n" "Вам, чи звук і служби alsa налаштовані для роботи в режимі\n" "initlevel 3\n" "\n" "- \"aumix -q\" повідомить Вам, чи відключена гучність звуку\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" повідомить Вам, яка програма використовує " "звукову\n" "карту.\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Помилка зупину" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "Налаштування поштового оповіщення" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Токелау" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "Співпадає" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "Боснійська" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "Випуск: " #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Швидкість з'єднання" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Намібія" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "Сервер баз даних" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" "спеціальні можливості драйвера (можливість записування і/чи підтримка DVD)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Не можу додати розділу до _форматованого_ RAID md%d" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Інтерфейс мережі" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ця відеоплата має підтримку апаратного прискорення тривимірної\n" "графіки, але тільки для XFree %s, ЗАУВАЖТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" "РЕЖИМ, ЯКИЙ МОЖЕ ПРИЗВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА.\n" "Ваша плата підтримується XFree %s, який має кращу підтримку двовимірної " "графіки." #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "Зачекайте, будь-ласка, встановлюются параметри безпеки..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Невідомий|CPH05X (bt878) [багато виробників]" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Запускати графічну оболонку при завантаженні системи" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "щогодини" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "Права клавіша Shift" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr " Успішно відновлено на %s " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "Встановлення доступності порта для CUPS..." #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Антигуа та Барбуда" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Виявляє, що пароль в системній базі даних відрізняється\n" "від пароля в базі даних Terminal Server.\n" "Витерти/Додати ще раз користувача в Terminal Server, щоб зробити\n" "можливою реєстрацію." #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Іспанська" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "Запустити" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "Пряма реєстрація root" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "Налаштовуються програми..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Ласкаво просимо до Помічника встановлення друкарки\n" "\n" "Цей Помічник допоможе Вам встановити Ваші друкарки, під'єднані до цього " "комп'ютера, безпосередньо до мережі, або до віддалених Windows-машин.\n" "\n" "Будь-ласка, під'єднайте до цього комп'ютера і увімкніть всі друкарки, щоб " "вони могли бути автовизначені. Мережеві друкарки і Windows-машини також " "повинні бути увімкнені.\n" "\n" "Зауважте, що автовизначення друкарок в мережі відбувається довше, ніж " "під'єднаних до Вашої машини. Тому вимкніть автовизначення мережевих друкарок " "і під'єднаних до інших Windows-машин, якщо вони Вам не потрібні.\n" "\n" " Натисніть \"Далі\", коли будете готові і \"Скасувати\", якщо Ви не хочете " "встановлювати друкарки зараз." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Звичайне з'єднання по модему" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "Вибір файла" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "Стерти плівку перед резервуванням" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "Запустити інструмент налаштування" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Встановлення завантажувача" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Розмір розділу root в Мб:" #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Цей пакунок необхідний, його вибір відмінити не можна" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" " - Створює etherboot дискети/КД:\n" " \tМашинам - бездисковим клієнтам потрібні ROM образи на NIC,дискети " "для завнтаження,\n" " \tабо КД для ініціалізації завантаження. drakTermServ допоможе " "створити такі образи,\n" " \tосновані на NIC на клієнтській машині.\n" " \t\t\n" " \tБазовий приклад створення диска завантаження для 3Com 3c509 " "вручную:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "ISO-образом завантаження з мережі є %s" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) - це сервер назв доменів (Domain Name Server, DNS), який\n" "використовується для перетворення назв машин у IP-адреси." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Санта-Лючія" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "Листопад" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Від'єднання..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "Звіт" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Палау" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "рівень" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" "Вирішення всіх проблем буде супроводжуватися одним кваліфікованим технічним " "експертом MandrakeSoft." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Вибір груп пакунків" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Дозволити налаштування\n" "локальних пристроїв." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Відновити через мережевий протокол: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "Тут Ви можете налаштувати кожен параметр модуля." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Виберіть роздільну здатність та кількість кольорів" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "Емулювати третю кнопку?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Ви не можете створити новий розділ\n" "(оскільки Ви вже досягли максимальної кількості первинних розділів).\n" "Спочатку видаліть первинний розділ і створіть додатковий." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Монтувати" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "Створення дискети для автоматичного встановлення" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "Встановити поновлення" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "висота текстового вікна" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Статус" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Переконайтеся, що носія вставлено в привід %s" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Дозволити багатопрофільність" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Не інтерпретувати символ або блокувати спеціальні пристрої у файловій " "системі." #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Ці параметри можуть створювати резервну копію і відновлювати всі файли в " "теці /etc.\n" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Локальна друкарка" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "Відновлено файлів..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Вибір пакунків" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Мавританія" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Я можу зберегти Вашу теперішню конфігурацію і прийняти, що Ви вже встановили " "сервер DHCP; у цьому випадку, будь-ласка, перевірте, чи я правильно прочитав " "тип Вашої місцевої мережі; я не буду її переналаштовувати і не чіпатиму " "конфігурацію DHCP-сервера.\n" "\n" "Типовим сервером імен є Caching Nameserver, сконфігурований на захисному \n" "шлюзі. Ви можете замінити його наприклад, на ISP DNS IP.\n" "\t\t \n" "В іншому випадку, я можу переналаштувати Ваш інтерфейс і змінити " "конфігурацію DHCP-сервера для Вас.\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Не знайдено місцевих друкарок! Щоб встановити вручну, введіть назву пристрою/" "файла (паралельні порти: /dev/lp0, /dev/lp1, ..., еквіваленти LPT1:, " "LPT2:, ..., перша USB-друкарка: /dev/usb/lp0, друга USB-друкарка: /dev/usb/" "lp1, ...)." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Всі первинні розділи використовуються" #: ../../printer/main.pm:1 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD сервер\"%s\", друкарка \"%s\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Після завершення рекомендуємо Вам перезавантажити X сервер для того,\n" "щоб позбутися проблем через зміну назви машини." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" "Автоматичне визначення та конфіґурування апаратного забезпечення при\n" "завантаженні." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "Конфігурація сервера встановлення" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "Налаштування IDE" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "Мережа не налаштована для роботи" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "Сконфігурувати модуль" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Кокосові острови" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Щоб зміни почали діяти, Вам слід перезавантажити комп'ютер" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Номер телефону провайдера" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "Машина %s" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Фіджі" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Вірменія" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Другий дисковод" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "Про Harddrake" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Дозволити TCP-з'єднання з X Window" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "Ємніть диску" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Вставте дискету в дисковод\n" "Всі дані на цій дискеті будуть втрачені" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Розмір: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Клавіші Control і Shift одночасно" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "вторинний" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "Показати конфігурацію резервування." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "якщо встановлено в 'так', то повідомляє результат перевірки в syslog." #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Без паролю" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Нігерія" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s потребує назви машини...\n" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Немає існуючих розділів для використання" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Наступні сканери\n" "\n" "%s\n" "доступні у Вашій системі.\n" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Багатофункціональний пристрій на паралельном порті #%s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Щоб друкувати на TCP- або сокет-друкарку, Вам потрібно надати назву машини " "або IP-адресу друкарки і, необов'язково, номер порта (типово 9100). На " "серверах HP JetDirect номер порта у більшості випадків 9100, на інших може " "відрізнятись. Перегляньте інструкцію до апаратного забезпечення." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "Інформація про твердий диск" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Російська" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "Йорданія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "Сховати файли" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Автоматично визначати друкарки, під'єднані до цієї машини" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Перепрошую, немає доступних дисководів" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Болівія" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Встановіть сервер Windows для того, щоб зробити друкарку доступною по " "протоколу IPP і налаштуйте друк з цієї машини по з'єднанню типу \"%s\" в " "Printerdrake.\n" "\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Поганий пакунок" #: ../advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "Перетворіть Ваш комп'ютер в потужний сервер на базі Лінакс: веб-сервер, " "поштовий, захисний шлюз, маршрутизатор, файловий і сервер друку - це всього " "лиш кілька клацань мишкою." #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "Основні параметри DrakSec" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Зауважте: якщо у Вас є звукова карта PnP, Вам буде потрібно використати " "програму sndconfig. Просто наберіть в консолі \"sndconfig\"." #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Румунія" #: ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "Група" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Канада" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "виберіть пристрій" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Видалити з LVM" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Часовий пояс" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Німецька" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "Далі ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Увімкнення цього параметра дозволяє друкувати простий текст японською мовою. " "Використовуйте його тільки тоді, коли Ви дійсно хочете друкувати текст " "японською, коли параметр увімкнено, Ви не зможете друкувати латинські " "символи з наголосами, а також встановлювати поля, розмір символів і т.і. Цей " "параметр стосується тільки друкарок, приєднаних до цієї машини. Якщо Ви " "хочете друкувати японський текст на віддаленій машині, Вам потрібно " "увімкнути цю функцію на тій віддаленій машині." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Можливо цей розділ є розділом\n" "Driver, Вам мабуть не потрібно\n" "його змінювати.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Гвінея-Бісау" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Частота горизонтальної розгортки" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "Виправити" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Не можу змінити точку монтування даного розділу, оскільки він\n" "використовується для зворотнього монтування. Спочатку відмініть\n" "зворотнє монтування." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "Мережу, налаштовану під час встановлення, неможливо зараз стартувати. " "Перевірте, будь-ласка, чи мережа є доступною після завантаження системи і " "правильно налаштованою в Центрі керування Мандрейк, розділ \"Мережа та " "інтернет\"/\"З'єднання\", і після цього встановіть друкарку, також " "використовуючи Центр керування Мандрейк, розділ \"Залізо\"/ \"Друкарка\"" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "Контролери USB" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "Який формат використовує Ваш телевізор?" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Тип:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Назва ресурсу" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "увімкнути" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Зв'язуюсь з веб-сайтом Mandrake Linux, щоб отримати список наявних джерел..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Проблема при перезапуску мережі:\n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Стерти файл зворотнього монтування?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Вибраний розмір більший за наявний простір" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "Немає назви сервера NCP!" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "Будь-ласка, вкажіть Вашу країну." #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "Резервуються файли твердого диску..." #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "Лаоська" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Самоа" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Протокол rstat дає можливість користувачам в мережі отримувати дані\n" "про завантання будь-якого комп'ютера в цій мережі." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Перестворюється список налаштованих сканерів ..." #: ../../modules/interactive.pm:1 #, c-format msgid "Module configuration" msgstr "Налаштування модулів" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "Сканер" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Попередження: тестування цієї графічної карти може призвести до зависання " "Вашого комп'ютера" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Ім'я користувача повинно складатися тільки з малих латинських літер,\n" "чисел, `-' та `_'" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Ласкаво просимо до кракерів!" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Параметри модуля:" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "Захистіть свою мережу з допомогою Multi Network Firewall" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "Продовжити без налаштування мережі" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Перервати" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "Немає підказки пароля на %s, порт %s" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse з емуляцією коліщатка" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "Використання віддалених сканерів" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Розділ з Windows на Вашому комп'ютері занадто фраґментований. Будь-ласка, " "перезавантажте свій комп'ютер під Windows, запустіть програму 'defrag', тоді " "перезапустіть встановлення Лінакс Мандрейк." #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Дворака (Норвезька)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Перебіг резервування твердого диску..." #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Неможливо розгалузити: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Тип: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- Редактувати клієнта" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "шрифтів не знайдено" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Миша" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "недостатньо місця в /boot" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Ліхтенштейн" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Назва машини" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "колір індикатора поступу" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "Вилучити файли шрифтів" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Додати до RAID" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "Можете додати додаткові пункти для yaboot для інших операційних систем,\n" "інших ядер чи для аварійного образу завантаження.\n" "\n" "Для інших ОС - пункт складається тільки з мітки та розділу\"root\".\n" "\n" "Для Лінакса є кілька можливих параметрів: \n" "\n" " * Мітка: це просто назва, яку ви маєте надрукувати при запрошенні\n" "yaboot, щоб вибрати цей параметр завантаження.\n" "\n" " * Образ: це назва ядра для завантаження. У більшості випадків - це\n" "vmlinux або варіанти назви з різними розширеннями.\n" "\n" " * Коренева файлова система: пристрій для кореневої файлової системи,\n" "або '/' Вашої системи Лінакс.\n" "\n" " * Додати: на апаратному забезпеченні Apple для ініціалізації відео-плати\n" "або для ініціалізації клавіатурної емуляції кнопок миші (на стандартній " "миші\n" "Apple немає 2-ї і 3-ї кнопок) досить часто використовуються додаткові\n" " параметри. Далі подані деякі приклади: \n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" "\n" " * Initrd: цей параметр може використовуватися або для завантаження\n" "модулів до того, як пристрій завантаження стане доступним, або\n" "для завантаження віртуального диску у випадку аварійного завантаження.\n" "\n" " * Розмір initrd: стандартний віртуальний диск має розмір 4096 байт,\n" "якщо Вам потрібен диск більшого розміру, можете скористатися цим\n" "параметром.\n" "\n" " * Запис/читання: звичайно коренева файлова система початково\n" "монтується в режимі тільки читання, щоб мати можливість провести перевірку\n" "файлової системи перш, ніж система завантажується в робочий режим. Це\n" "можна відмінити цим параметром.\n" "\n" " * БезВідео: у випадку, коли відео-плата Apple виявиться особливо\n" "проблематичною, Ви можете вибрати цей параметр, щоб\n" "стартувати у режимі без відео з підтримкою рідного framebuffer.\n" "\n" " * Стандарна: типовий вибір Лінакса, вибирається, якщо Ви натиснете\n" "ENTER у рядку вводу yaboot. Також цей пункт буде виділений\n" "символом ``*'', якщо Ви натиснете [Tab], щоб подивитися список\n" "команд boot." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "Друкарку \"%s\" було успішно додано до Star Office/OpenOffice.org/GIMP." #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "Немає доступних дисководів!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Щоб довідатися про доступні параметри на цій друкарці, читайте список нижче, " "або натисніть на кнопку \"Параметри друку\" .%s%s%s\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Саудівська Аравія" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "Інтернет" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Все-таки продовжувати?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Якщо Вашої друкарки немає в переліку, виберіть сумісну (див. документацію до " "друкарки) або подібну." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Друкарка" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "Деякі пристрої було додано:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геометрія: %s циліндрів, %s головок, %s секторів\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Друк на друкарці \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "/etc/hosts.allow і /etc/hosts.deny вже налаштовані - не змінено" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "Відновити з плівки" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" "Щоб відправити звіт про помилку, натисніть на кнопку звіту, яка відкриє " "сторінку Anthill\n" "у Вашому типовому переглядачі тенет, де Ви зможете звантажити форму для " "заповнення інформації про помилку." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Виберіть профіль для налаштування" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Найменша довжина пароля і кількість цифр і великих літер" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" "\n" "\n" "Введіть назву машини Zeroconf без крапок, якщо Ви\n" "не хочете використовувати існуючу назву машини." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "Зарезервувати з конфігураційного файла" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Точки монтування можуть містити тільки символи букв і цифр" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "Перезапускається система друку..." #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Перегляньте інформацію про апаратне забезпечення" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "День" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Перший сектор системного розділу (boot partition)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "Виробник друкарки, модель" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Друкувати, не ставити в чергу" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[ПАРАМЕТРИ]...\n" "Конфігуратор Mandrake Terminal Server\n" "--enable : увімкнути MTS\n" "--disable : вимкнути MTS\n" "--start : запустити MTS\n" "--stop : зупинити MTS\n" "--adduser : додати існуючого системного користувача до MTS (потребує " "назви користувача)\n" "--deluser : вилучити існуючого системного користувача з MTS (потребує " "назви користувача)\n" "--addclient : додати клієнтську машину до MTS (потребує MAC-адресу, IP, " "назву образу nbi)\n" "--delclient : вилучити клієнтську машину з MTS (потребує MAC-адресу, " "IP, назву образу nbi)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "Маска підмережі:" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Встановити термін дії пароля і облік призупинень активності" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Завантаження" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Двома дуже важливими параметрами є частота вертикальної розгортки\n" "(тобто частота, з якою поновлюється зображення на екрані) та\n" "найбільш важлива частота горизонтальної синхронізації (тобто та\n" "частота, з якою на екрані малюються горизонтальні рядки).\n" "\n" "ДУЖЕ ВАЖЛИВО ПАМ'ЯТАТИ, що Ви повинні вибрати такий монітор, параметри\n" "якого не перевищують справжніх параметрів Вашого монітора, інакше Ви\n" "можете його пошкодити. \n" "Якщо Ви маєте сумніви щодо характеристик свого монітора, виберіть\n" "гірший монітор." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Змінити" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Команди \"%s\" і \"%s\" також дозволяють змінити параметри окремого завдання " "друку. Просто додайте бажаний параметр в командному рядку, наприклад, \"%s " "\".\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "Потрібні назва машини, користувача і пароль!" #: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "Вставте дискету" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV - це протокол, який дозволяє Вам локально монтувати теки\n" "веб-сервера, інтерпретуючи їх як локальну файлову систему (якщо\n" "веб-сервер сконфігуровано як сервер WebDAV). Якщо Ви захочете\n" "додати точки монтування WebDAV, виберіть \"Нова\"." #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "новий" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Увімкнути/Вимкнути звіти системного журналу на консоль 12" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "Чи хочете Ви спробувати знову?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Помічник" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "Редактувати вибраний сервер" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "Будь-ласка, вкажіть, куди Ви хочете резервувати" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Для того, щоб таблиця розділів була активізована, Вам треба\n" "перезавантажити систему" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "Не включати кеш переглядача" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Перевірка файлової системи %s завершилася помилкою. Чи хочете Ви виправити " "помилки (майте на увазі, що Ви можете втратити дані)?" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Будь-ласка, виберіть мапу клавіатури." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Стандартний" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Будь-ласка, виберіть тип миші." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "З'єднання..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Помилка при налаштуванні друкарки \"%s\"..." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "не налаштовано" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "Про" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Конфіґурація проксі" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Початок: сектор %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "Маски немає" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "Мережевий інтерфейс вже налаштовано" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "Не можу отримати доступу до дисковода!" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Попередження: Безкоштовні програми необов'язково можуть використовуватися\n" "без патентів і деякі з таких програм, включених сюди, можуть бути захищені\n" "патентами у Вашій країні. Наприклад, декодери MP3 можуть потребувати\n" "ліцензії для подальшого використання (див. http://www.mp3licensing.com для\n" "детальнішого ознайомлення. Якщо Ви не впевнені, чи патент годиться для Вас,\n" "проконсультуйтесь про законодавство Вашої країни." #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "Поштовий сервер" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Клацніть, будь-ласка, на розділі" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Багатофункціональний пристрій на HP JetDirect" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Лінакс" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "Всього найкращого!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "Поновити %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Виберіть приєднання друкарки" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Триває сканування каналів TV ..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "Помилка під час відсилання файла по FTP.\n" " Будь-ласка, виправте налаштування FTP.." #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "Початок інтервалу IP:" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Служба інтернет суперсервер (більше відома як inetd) служить для запуску\n" "різноманітних сервісів Інтернету, коли це необхідно. Вона\n" "відповідає за старт багатьох сервісів, таких як telnet, ftp, rsh,\n" "та rlogin. При непрацюючій службі inetd не будуть також працювати\n" "всі інші сервіси." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "висота індикатора поступу" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Зберегти через %s на машину: %s\n" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Аргентина" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "Сервер назв домена" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "Рівень безпеки:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Точка монтування повинна починатися з /" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "Будь-ласка, виберіть пристрій CD/DVD" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "CUPS server" msgstr "Сервер DNS" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "Поштовий сервер postfix" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Вийти без запису" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Ємен" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "Ця програма доступна на веб-сайті MandrakeStore." #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Існує багато чого, щоб вибрати з (%s).\n" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Визначення твердого диску" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Ви не вказали жодної групи пакунків.\n" "Будь-ласка, вкажіть мінімальне встановлення, яке Ви хочете:" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Вам потрібно Alcatel microcode.\n" "Ви можете надати його зараз з допомогою дискети або розділу\n" "віндовс, або пропустити і виконати пізніше." #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Будь-ласка, вкажіть посилання на сервер WebDAV" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Таджикістан" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Прийняти" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "Опис" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "Будь-ласка, введіть підсумковий текст." #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Помилка при відкриванні %s на запис: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Тип миші: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Ваша відеоплата може мати підтримку апаратного прискорення 3D з сервером " "XFree %s." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Виберіть тип монітору" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Не дозволяються порожні мітки" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "Мальтійська (UK)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Не можу додати жодного розділу" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Розмір (Мб): " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Віддалена друкарка" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "Виберіть, будь-ласка, мову." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "УВАГА: Цей пристрій було попередньо налаштовано для з'єднання з Інтернетом.\n" "\n" "Просто натисніть \"Гаразд\", щоб зберегти конфіґурацію пристрою.\n" "Зміна полів нижче призведе до зміни конфіґурації пристрою." #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Я можу налаштувати Ваш комп'ютер так, щоб автоматично реєструвався\n" "один користувач." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "Форматувати дискету" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "Стандартні друкарки" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Будь-ласка, виберіть друкарку, на яку відсилати завдання друку, або введіть " "назву пристрою/файла в рядку вводу" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Сканери з цієї машини є доступними для інших комп'ютерів" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "Перший сектор системного розділу (boot partition)" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "Альтернативні драйвери" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Будь-ласка, перевірте всі параметри, які Вам потрібні.\n" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Острови Зеленого Мису" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "якщо цей процесор має помилку Cyrix 6x86 Coma" #: ../../standalone/printerdrake:1 #, c-format msgid "Loading printer configuration... Please wait" msgstr "Завантажується конфігурація друкарки... Зачекайте, будь-ласка" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "ранні пентіуми мали помилку і зависали при декодуванні F00F" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Ґуам" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Будь-ласка, вкажіть порт, до якого під'єднано Вашу друкарку, або введіть " "назву пристрою/файла в рядку вводу" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Параметри/Тест" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Цей рівень потрібно використовувати з обережністю. Він дозволяє більш\n" "просте користування Вашою системою, але є надзвичайно ненадійним. Не\n" "можна користуватися такою системою, коли вона під'єднана мережею до\n" "інших систем, або до інтернету. Паролі не використовуються в цій\n" "системі." #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "Монтування розділу %s" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Ім'я користувача" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Який розділ Ви хочете використовувати для Linux4Win?" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "due to missing %s" msgstr "немає kdesu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Тестові сторінки" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "Назва логічного диску" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Перелік даних для відновлення:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "Перевірка %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "Параметри друкарки TCP/Socket" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Пам'ять картки (DMA)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "Виконується від'єднання від інтернету " #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Франція" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "переглянути" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "Перевірка встановленого програмного забезпечення..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "Відсутня назва віддаленої друкарки!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Ви хочете дозволити друк на друкарках і місцевій мережі?\n" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Туреччина" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "Кількість кнопок" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "В'єтнамська \"цифровий ряд\" QWERTY" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Модуль" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "На додаток, черги не формуються цією програмою або конфіґурація\n" "\"foomatic-configure\" не може бути перенесена." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "Залізо" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Клавіші Ctrl і Alt одночасно" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Сполучені Штати" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "Маска користувача" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Основна система?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Швейцарська (німецька розкладка)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Сконфіґурувати всі головки незалежно" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "Будь-ласка, виберіть друкарку, яку Ви хочете налаштувати. Налаштування Вашої " "друкарки відбудеться повністю автоматично. Якщо Вашу друкарку буде " "неправильно визначено, або якщо Ви віддаєте перевагу налаштуванню вручну, " "виберіть \"Налаштування вручну\"." #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "Сервер NTP" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) в однокористувацькому рівні" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "Прочитати з дискети/записати на дискету" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "Ця тема ще не має bootsplash в %s !" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "гарно" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "Залишається %d секунд" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Виберіть, до якого послідовного порта під'єднаний Ваш модем." #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "Властивість" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "Конфіґурація локальної мережі" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Ґана" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "Потрібний шлях або модуль" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "Додаткові параметри" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "Переглянути конфіґурацію" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "Coma bug" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Зараз Вам потрібно вибрати, які розділи використовувати для встановлення\n" "Вашої нової системи Лінакс Мандрейк. Якщо ці розділи вже були створені\n" "при попередньому встановленні системи GNU/Linux, або створені іншою\n" "програмою розподілу диску, Ви можете скористатися вже існуючими\n" "розділами. В іншому випадку потрібно створити розділи на твердому диску.\n" "\n" "Щоб створити розділи, Вам потрібно вибрати твердий диск. Ви можете\n" "вибрати диск, клацнувши на \"hda\" для першого диску типу IDE,\n" "\"hdb\" для другого диску типу IDE, \"sda\", якщо Ви будете встановлювати\n" "систему на першому диску типу SCSI і так далі.\n" "\n" "Щоб розбити диск на розділи, Ви можете скористатися такими командами:\n" "\n" " * \"%s\": видаляє всі розділи на вибраному твердому диску\n" "\n" " * \"%s\": ця команда автоматично створить розділи типу ext3 та swap\n" "на вільному місці диску\n" "\n" "\"%s\": дає доступ до додаткових параметрів:\n" "\n" " * \"%s\": записує таблицю розділів на дискету. Використовується для\n" "відновлення таблиці розділів при потребі. Дуже рекомендується виконувати\n" "цей крок.\n" "\n" " * \"%s\": дає змогу Вам відновити раніше записану таблицю розділів з\n" "дискети.\n" "\n" " * \"%s\": якщо таблиця розділів Вашого диску пошкоджена, Ви можете\n" "спробувати відновити її, скориставшись цією командою. Будь-ласка,\n" "будьте-обережними і пам'ятайте, що ця команда не завжди спрацьовує.\n" "\n" " * \"%s\": відмовитися від всіх змін і завантажити таблицю розділів, яка\n" "була на Вашому твердому диску.\n" "\n" " * \"%s\": відміна цього параметра зробить необхідним монтування і\n" "розмонтування знімних носіїв - дискети і компакт-диску - користувачами\n" "вручну.\n" "\n" " * \"%s\": використайте цю команду, якщо Ви хочете, щоб помічник розподілив\n" "Ваш диск. Рекомендується, якщо Ви не розумієтесь добре про\n" "розподіл диску. \n" "\n" " * \"%s\": використайте цю команду, щоб скасувати всі зміни.\n" "\n" " * \"%s\": дозволити додаткові дії при розбиванні (тип, параметри, формат)\n" "і отримати більше інформації про твердий диск.\n" "\n" " * \"%s\": ця команда запише зміни на диск після того, як Ви закінчите " "розбиття\n" "Вашого твердого диску. \n" "\n" "Коли Ви задаєте розмір розділу, можете точніше задати розмір,\n" "використовуючи клавіші курсора на клавіатурі.\n" "\n" "Примітка: Ви можете виконати будь-яку команду з клавіатури. Переміщайтеся\n" "по розділах здопомогою клавіш [Tab] і [Up/Down].\n" "\n" "Коли певний розділ вибрано, Ви можете використовувати:\n" "\n" " * Ctrl-c, щоб створити новий розділ (якщо вибрано порожній розділ)\n" "\n" " * Ctrl-d, щоб стерти розділ\n" "\n" " * Ctrl-m, щоб встановити точку монтування\n" "\n" "Щоб отримати інформацію про різні типи файлових систем, які Ви можете\n" "створити, прочитайте розділ ext2FS з ``Reference Manual''.\n" "\n" "Якщо Ви встановлюєте систему на комп'ютер з процесором PPC, можете\n" "створити маленький розділ типу HFS для завантаження 'bootstrap'\n" "(розміром не менше 1Мб) для завантажувача yaboot. Якщо Ви вирішите\n" "створити розділ трохи більшого розміру, скажімо 50Мб, Ви зможете\n" "також зберігати на ньому резервне ядро системи та віртуальний диск для\n" "аварійних завантажень системи. " #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "Графічна карта\n" "\n" " Програма встановлення в нормальному режимі автоматично знаходить\n" "і налаштовує графічну карту, встановлену на Вашій машині. Якщо цього не\n" "відбувається, Ви можете вибрати із списку карту, яку Ви встановили.\n" "\n" " У випадку, якщо Ваша карта підтримує різні сервери з або без\n" "3D-прискорення, Вам буде надана можливість вибрати сервер, який найбільше\n" "Вам підходить." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Сталася помилка під час встановлення пакунків: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "Конфігурація Lexmark inkjet" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Повернути дію" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Зберегти таблицю розділів" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Фінська" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Македонія" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Доступ для окремих користувачів здійснюється групою \"fileshare\". \n" "Ви можете використовувати userdrake, щоб додати користувача в цю групу." #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Словенська" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Дозволяти:\n" "\n" "- всі служби, що контролюються tcp_wrappers (див. hosts.deny(5) man page), " "якщо встановлено у \"ВСІ\",\n" "\n" "- тільки локальні, якщо встановлено в \"ЛОКАЛЬНІ\"\n" "\n" "- ніякі, якщо встановлено в \"НІЧОГО\".\n" "\n" "Щоб дозволити служби, які Вам потрібні, використовуйту /etc/hosts.allow (see " "hosts.allow (5))." #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "Лівія" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Конфіґурація скриптів, встановлення програм, запуск серверів..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "Друкарка на паралельному порті #%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Записати на КД" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Таблиця" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Я не знаю, як форматувати %s типу %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "Модель" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "USB-друкарка #%s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "Зупинити сервер" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" "\n" "Виберіть тему для\n" "lilo і bootsplash,\n" "Ви можете вибрати\n" "їх окремо" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "Модем" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Тувалу" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Користуватися автовизначенням" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM додає підтримку миші до текстових програм у Лінаксі, таких як,\n" "наприклад, Midnight Commander. Додає також можливості \"cut-and-paste\"\n" "до програм, що працюють на консолі, включаючи підтримку меню на\n" "консолі." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Стартувати при завантаженні" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" "Приєднуйтеся для груп підтримки MandrakeSoft і Linux Community в режимі " "прямого зв'язку для обміну знаннями та допомоги іншим, станьте визнаним " "експертом на сайті прямої технічної підтримки:" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "Немає терміну дії пароля для" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "Наступні параметри можуть бути встановлені для налаштування\n" "Вашої системи безпеки. Якщо Вам потрібне пояснення, дивіться\n" "контекстну довідку.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Автоматично знайти друкарки на віддалених машинах" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Східний Тімор" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "на пристрій читання магнітної плівки" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" " Зберегти на плівку на пристрої: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "Ім'я користувача, що реєструється" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "Звітувати про файли без власників" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "Стерти профіль..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "Встановлення Foomatic..." #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Будь-ласка, вийдіть із системи і потім натисніть Ctrl-Alt-BackSpace" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "знайдено" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Мережа потребує перезапуску. Перезапустити зараз?" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "Пакунок: " #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "Не можу записати /etc/sysconfig/bootsplash." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "ПОПЕРЕДЖЕННЯ БЕЗПЕКИ!" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Ні, мені не потрібна автоматична реєстрація" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "Інструмент Windows Migration" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "Всі мови" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "Видалення %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s not found...\n" msgstr "%s не знайдено...\n" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Випробування з'єднання..." #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "Розмір кешу" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Паролі тепер увімкнені, але все одно не рекомендується користуватися цим " "комп'ютером в мережі." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Початковий сектор: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "Конго (Браззавіль)" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "Читати" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Потрібно встановити пакунок %s. Ви хочете його встановити?" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Сейшельські острови" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake порівнює назву моделі, отриману в результаті автовизначення\n" "друкарки, із списком друкарок у своїй базі даних і знаходить найкращу\n" "відповідність. Такий вибір може бути помилковим, особливо, коли Вашої\n" "друкарки зовсім немає в базі даних. Тому перевірте, чи вибір є правильним\n" "і натисність \"Модель правильна\", а якщо ні, то натисність \"Вибрати " "модель\n" "вручну.\", щоб зробити вибір моделі Вашої друкарки вручну в наступному\n" "екрані.\n" "\n" "Щодо Вашої друкарки Printerdrake знайшов:\n" "\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "Поганий пароль на %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Є одна невідома друкарка, під'єднана безпосередньо до Вашої системи" #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "Права клавіша Control" #: ../../network/tools.pm:1 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Вставте дискету відформатовану у FAT в привід %s з %s в в кореневу теку і " "натисніть %s" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Замбія" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "Адміністратор безпеки (логін або email)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "Вибачте, ми підтримуємо тільки ядро 2.4." #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "Румунська (qwerty)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "Розробляється ... будь-ласка, зачекайте." #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Єгипет" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Чешська республіка" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Звукова плата" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "Імпортувати шрифти" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Ви маєте один великий розділ MicroSoft Windows.\n" "Я пропоную Вам спочатку змінити розмір цього розділу\n" "(клацніть на ньому, потім клацніть на \"Змінити розмір\")" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "Видалити тимчасові файли" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Вітаємо, налаштування мережі та Internet завершено.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Змінити тип розділу" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" "Роздільна здатність\n" "\n" " Тут Ви можете вибрати роздільну здатність і глибину кольору.\n" "Виберіть величини, які Вас найбільше влаштовують (Ви зможете\n" "їх змінити після встановлення). Зразок вибраного налаштування\n" "буде показано на моніторі." #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "Параметри мережі" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "Увімкнути щогодинну перевірку безпеки msec" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Показувати тему\n" "над консоллю" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(на %s)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "Серія MM" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Бібліотека, яка захищає від атак переповнення буфера і форматування рядка." #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "середньо" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "Нова назва друкарки" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "Дозволяє звичайному користувачеві монтувати файлову систему.\n" "Ім'я монтуючого користувача записується в mtab, тому він зможе\n" "розмонтувати файлову систему. Цей параметр передбачає параметри\n" "noexec, nosuid і nodev (якщо не брати до уваги такі параметри, як line\n" "user,exec,dev,suid )." #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Екваторіальна Гвінея" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "Резервування системи" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "Створити резервну копію" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Для друку файла з командного рядка (вікна термінала) використовуйте команду " "\"%s \" або \"%s \".\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "На даний момент немає альтернативної можливості" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "Румунська (qwertz)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "Записати налаштування" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Служба routed дає можливість користуватися автоматичним поновленням\n" "таблиці маршрутизації IP за допомогою протокола RIP. Протокол RIP\n" "широко використовується на невеликих мережах, в той час, як на більш\n" "складних необхідне застосування більш розвинених протоколів\n" "маршрутизації." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Кірібаті" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (serial, тип C7) з емуляцією коліщатка" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "Інші (не drakbackup) ключі вже на місці" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "X (для системи X Window) є серцем графічного інтерфейсу GNU/Linux,\n" "від якого залежать всі графічні середовища (KDE, GNOME, AfterStep,\n" "WindowMaker, і т.і.), пов'язані з Mandrake Linux.\n" "\n" "Вам буде представлено список різних параметрів для налаштування,\n" "щоб отримати оптимальний графічний дисплей: графічна карта\n" "\n" " Програма встановлення автоматично визначає і налаштовує графічну\n" "карту, встановлену в машину. Якщо вона визначена неправильно, Ви можете\n" "вибрати із списку карту, яка дійсно встановлена.\n" "\n" " У випадку, якщо Ваша карта підтримує різні сервери з або без 3D\n" "прискоренням, буде запропоновано вибрати сервер, який Вам найбільше\n" "підходить.\n" "\n" "\n" "\n" "Монітор\n" "\n" " Програма встановлення автоматично визначає і налаштовує монітор,\n" "під'єднаний до Вашої машини. Якщо це зроблено неправильно, Ви можете\n" "вибрати із списку монітор, який дійсно під'єднано до Вашого комп'ютера.\n" "\n" "\n" "\n" "Роздільна здатність\n" "\n" " Тут Ви можете вибрати роздільну здатність і кількість кольорів, які\n" "підтримує Ваше обладнання. Підберіть величини, які найбільше Вас\n" "влаштовують (Ви матимите змогу їх змінити пізніше). Зразок вибраного\n" "налаштування буде показано на моніторі.\n" "\n" "\n" "\n" "Тест\n" "\n" " система спробує відкрити графічний екран з вибраною роздільністю.\n" "Якщо Ви зможете побачити повідомлення під час тесту і відповісте \"%s\",\n" "DrakX перейде до наступного кроку. Якщо Ви не зможете бачити\n" "повідомлення, це означатиме, що певна частина автоматично визначеної\n" "конфігурації неправильна, тест автоматично завершиться через 12 секунд\n" "і Ви повернетесь назад в меню. Змінюйте налаштування, поки не отримаєте\n" "коректний графічний дисплей.\n" "\n" "\n" "\n" "Параметри\n" "\n" " Тут Ви можете вибрати, чи хочете Ви, щоб Ваша машина автоматично\n" "перемикалася в графічний інтерфейс при завантаженні. Зрозуміло, що Ви\n" "захочете вибрати \"%s\", якщо Ваша машина є сервером, або якщо Ви не\n" "змогли успішно налаштувати дисплей." #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "Перейти" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "CDROM" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Чи хочете Ви спробувати під'єднатися до інтернету зараз?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Бельгійська" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "Чи маєте Ви звукові карти ISA?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "У Вашій системі немає сконфіґурованого адаптера мережі ethernet. Не\n" "можна встановити з'єднання цього типу." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "Windows" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Не можу робити знімки екрану перед розбиттям на розділи" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "Назва машини" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Файл/Записати, як" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "Щоб отримати доступ до друкарок на віддалених CUPS-серверах у місцевій " "мережі, Вам потрібно увімкнути параметр \"Автоматично знаходити можливі " "друкарки на віддалених машинах\"; сервер CUPS автоматично повідомить Вашу " "машину про свої друкарки. Всі друкарки, які зараз відомі Вашій машині, " "перелічені в секції \"Віддалені друкарки\" головного вікна Printerdrake. " "Якщо Ваші сервери CUPS не знаходяться в місцевій мережі, Вам потрібно ввести " "тут IP-адреси і, необов'язково, номери портів, щоб дати друкарці інформацію " "з серверів." #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s немає в базі даних про сканери, налаштуєте вручну?" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Пауза перед завантаженням основної системи" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Обмежити параметри командного рядка" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "Східна Європа" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Використовувати вільний простір" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "користуватися dhcp" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "Поштове повідомлення" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Конфігурація інтернету" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Узбекистан" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "Знайдено %s" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "/Користуватися автовизначенням друкарок" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Закінчити" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "Показувати автоматично вибрані пакунки" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Тоґо" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "Прапорці CPU, повідомлені ядром" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Щось пішло з помилками! - Чи встановлено mkisofs?" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 Мб" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Будь-ласка, спробуйте ще раз" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "Модель правильна" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Зміна розміру FAT не відбулася: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Індивідульний вибір пакунків" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Розмір цього розділу неможливо змінити" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "Розташування" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "США (cable-hrc)" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Ґватемала" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Журнальна файлова система" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Перевірка різнорідності карт ethernet." #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "Ця машина" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Літера диску в ДОСі: %s (припущення)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Бахрейн" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Виберіть файли або теки і натисніть 'Гаразд'" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "пропускати модулі scsi" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "сімейство cpu (напр. 6 для класу i686)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Через те, що Ви робите встановлення мережі, Ваша мережа вже\n" "сконфіґурована.\n" "\n" "Натисніть Гаразд, щоб зберегти установки мережі, або Відмінити,\n" "щоб змінити установки з'єднання інтернета і мережі.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "Запустити щоденні перевірки безпеки" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Розкладка клавіатури: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Тут Ви можете вказати, чи можуть під'єднані до цієї машини друкарки бути " "доступними для віддалених машин, і до яких саме." #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "Мальтійська (US)" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "Створення дискети для завантаження завершено успішно \n" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Монтує та розмонтовує всі файлові системи типу Network File System\n" "(NFS), SMB (Lan Manager/Windows) та NCP (NetWare)." #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "Запустити Помічника" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "Телевізійна карта" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "Перемикнути між режимами Експерт/Звичайний" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Розмір" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "GRUB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Ґренландія" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "Четвер" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Неправильна мітка плівки. Плівка має мітку %s." #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Установка спільного користування з'єднанням з інтернетом вже\n" "зроблена. Спільне користування в даний момент дозволене.\n" "\n" "Що Ви бажаєте зробити?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "Видалити всі NBI" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" "Цей діалог допоможе Вам налаштувати Ваш завантажувач.\n" "\n" " * \"%s\": існує три варіанти Вашого завантажувача:\n" "\n" " * \"%s\": якщо Ви віддаєте перевагу grub (текстове меню).\n" "\n" " * \"%s\": якщо Ви віддаєте перевагу LILO з текстовим інтерфейсом.\n" "\n" " * \"%s\": якщо Ви віддаєте перевагу LILO з графічним інтерфейсом.\n" "\n" " * \"%s\": у більшості випадків Вам не потрібно буде змінювати типовий\n" "диск (\"%s\"), але якщо Ви захочете, завантажувач може бути встановлено\n" "на другий твердий диск (\"%s\"), чи навіть на дискету (\"%s\");\n" "\n" " * \"%s\": це затримка, яка надається користувачеві при завантаженні\n" "або перезавантаженні системи, щоб він мав можливість вибрати відмінні\n" "від типових параметри в меню завантажувача.\n" "\n" "!! Будьте уважними: якщо Ви виберете не встановлювати завантажувач\n" "(вибравши \"%s\"), переконайтеся, що Ви маєте інший спосіб завантаження\n" "системи Мандрейк Лінакс! Будьте також певними, що Ви добре знаєте, що Ви\n" "робите, коли Ви змінюєте будь-які параметри!!\n" "\n" "Натиснувши кнопку \"%s\" в цьому вікні, Ви отримаєте доступ до\n" "багатьох додаткових конфіґураційних параметрів, призначених для\n" "досвідчених користувачів." #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "якщо встановлено, відсилає поштове повідомлення на цю поштову адресу, ще " "відсилає його rootу." #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Яку конфігурацію XFree Ви хочете мати?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Ще" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" "Це використовує такий самий синтаксис, як і програма командного рядка " "'cdrecord'. 'cdrecord - scanbus' також покаже Вам номер пристрою." #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "На цьому рівні безпеки систему можна використовувати в якості сервера.\n" "Рівень безпеки для цієї системи тепер достатній для того, щоб\n" "використовувати її як сервер, що допускає під'єднання до нього\n" "багатьох клієнтів. Зауваження: якщо Ваша машина є клієнтом тільки інтернету, " "Ви можете вибрати нижчий рівень безпеки." #: ../../standalone/printerdrake:1 #, c-format msgid "Server Name" msgstr "Назва сервера" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Пароль рахунка" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "%s не може бути виведено на дисплей \n" ". Немає пункту Довідка цього типу\n" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Ви дозволили встановити bootloader в розділ.\n" "Це передбачає, що Ви маєте bootloader на твердому диску, з якого Ви " "завантажилися (напр.: System Commander).\n" "\n" "З якого диска Ви завантажуєтеся?" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "ПОПЕРЕДЖЕННЯ!\n" "\n" "Зараз DrakX змінить розмір розділу Windows. Будьте уважні:\n" "ця операція небезпечна. Якщо Ви ще не зробили, Вам потрібно\n" "зараз припинити встановлення, виконати \"chkdsk c:\" з командного\n" "рядка у Windows (майте на увазі, запуска графічної програми \n" "\"scandisk\" недостатньо, необхідно виконати \"chkdsk\" саме з\n" "командного рядка!), виконати defrag (необов'язково), тоді перезапустити\n" "встановлення. Потрібно також зробити резервну копію\n" "Ваших даних.\n" "Якщо Ви впевнені - тисніть Гаразд." #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "Таджицька клавіатура" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Ви можете скопіювати конфігурацію друкарки, яка була підготовлена для черги %" "s, в %s, Вашу поточну чергу. Всі установочні дані (назва\n" "друкарки, опис, розташування, тип з'єднання і стандартні установки)\n" "будуть перенесені на нову конфіґурацію, але роботи з черги перенесено\n" "не буде.\n" "Не всі черги можуть бути перенесеними з таких причин: \n" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "Список шрифтів" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Можливо, Вам потрібно змінити пристрій завантаження у Open Firmware,\n" "щоб дозволити роботу завантажувача. Якщо Ви не бачите запрошення\n" "завантажувача при завантаженні системи, натисніть Command-Option-O-F\n" "при завантаженні і введіть setenv boot-device %s,\\\\:tbxi. Після\n" "цього надрукуйте shut-down. При наступному завантаженні ви побачите\n" "підказку завантажувача. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "Здається у Вас машина OldWorld чи Невідома. Завантажувач yaboot не\n" "буде працювати з цією машиною. Встановлення буде продовжуватись, але для\n" "завантаження, Вам потрібно використати BootX чи якийсь інший спосіб для " "завантаження Вашої машини" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Виберіть файл" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "Виберіть мережу або машину, на якій Ваша друкарка могла б працювати:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Ці команди Ви також можете використовувати у полі \"Команди друку\" в " "діалозі друкування багатьох програм, але тут не підтримуються назви файлів, " "тому що файли до друку вказуються програмою.\n" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Японія" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "Список параметрів друкарки" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "Зміни зроблено, але щоб вони вступили в дію, Вам потрібно перезареєструватися" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "Країна / Регіон" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "Пошук серверів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "Немає назви черги NCP!" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Попередження, виявлено інше з'єднання з інтернетом, можливо, воно " "використовує Вашу мережу" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Компакт-диск з етикеткою \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "носій CDRW" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Зберігає і відновлює джерело ентропії в системі, тим самим підвищуючи\n" "якість ґенерації випадкових чисел." #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "Перетворіть Ваш комп'ютер в надійний сервер" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Виберіть порожній пароль в /etc/shadow" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (драйвер%s)" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "Запустити за запитом" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Файл(и) зворотнього монтування: \n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Не знаю" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", машина TCP/IP \"%s\", порт %s" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Зараз Ви будете налаштовувати дискету для автоматичного встановлення. Цей\n" "режим встановлення дещо небезпечний і ним треба користуватися\n" "помірковано.\n" "\n" "Користуючись цим режимом, Ви можете повторити встановлення, яке Ви\n" "щойно виконали на даній системі. На деяких етапах Вам будуть\n" "задані запитання, щоб змінити значення кількох змінних.\n" "\n" "Для найбільшої безпеки поділ диску на розділи і форматування ніколи не\n" "буде виконуватись автоматично незалежно від того, що вибрано при\n" "встановленні.\n" "\n" "Хочете продовжувати? " #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "Телуґу" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Ваша картка зараз використуває драйвер %s\"%s\" (типовим драйвером для Вашої " "картки є \"%s\")" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "Завершення видалення" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "Виконується з'єднання з інтернетом" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr " (" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "Рівень cpuid" #: ../../printer/main.pm:1 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Сервер Novell \"%s\", друкарка \"%s\"" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "Монгольська (кирилиця)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Додати модуль" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "Профіль для стирання:" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "Локальний показник" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "Попередження : IP-адреса %s вже зарезервована !" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "busmouse" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - Створити образи Etherboot Enabled Boot:\n" " \tЩоб стартувати ядро з допомогою etherboot, потрібно створити " "спеціальний образ ядра/initrd.\n" " \tmkinitrd-net виконує більшу частину цієї роботи і drakTermServ є " "просто графічним інтерфейсом\n" " \tдля легшого збирання/налаштування цих образів. Щоб створити файл \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include, який включений як " "вкладений в \n" " \tdhcpd.conf, Вам потрібно створити etherboot-образи для хоч би " "одного повного ядра." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Рахунок користувача (ім'я користувача)" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "Помилка Fdiv" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "Конфігуратор drakfirewall\n" "\n" "Перед тим, як робити щось далі, переконайтеся, що Ви налаштували\n" "доступ до Network/Internet з допомогою drakconnect." #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Прийняти оповіщувальне ехо icmp" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Уругвай" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Бенін" #: ../../printer/main.pm:1 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "Сервер SMB/Windows \"%s\", ресурс \"%s\"" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "Вибір шляху" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "Назва/IP-адреса машини:" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Монітор: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Custom & system settings" msgstr "Типові і системні встановлення" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Щось недобре відбувається на вашому диску.\n" "Тестування цілісності даних було невдалим.\n" "Це означає, що результатом запису будь-чого на диск будуть випадкові, " "пошкоджені дані." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "Немає назви в мережі або IP друкарки!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" "Будь-ласка, перевірте усіх користувачів, яких Ви хочете включити в резервну " "копію." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "Потрібно налаштувати %s з допомогою printerdrake.\n" "Ви можете запустити printerdrake з центру керування Мандрейк в розділі " "Залізо." #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Key isn't writable" msgstr "XawTV не встановлено!" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Бангладеш" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "Японія (кабель)" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "Початкові тести" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Продовжити" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "Спеціальне відновлення" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "Субота" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "\"%s\": якщо система визначить звукову карту, її тип буде показано тут.\n" "Якщо Ви побачите, що вона не того типу, що дійсно вставлена у Вашій\n" "системі, можете натиснути кнопку і вибрати інший драйвер." #: ../../security/help.pm:1 #, c-format msgid "Set the root umask." msgstr "Встановити маску користувача root." #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "Помилка при читанні файла %s" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "На основі скрипта" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "встановлення PLL :" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Ви повинні мати розділ FAT, змонтований в /boot/efi" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr " на " #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "адреса повинна починатися з http:// або https://" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Можна вказати безпосередньо адресу для доступу до друкарки. Адреса має\n" "відповідати специфікаціям або CUPS, або Foomatic. Зауважте, однак, що\n" "не всі типи адрес підтримуються засобами керування черг друку." #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Інші операційні системи (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "Встановити/Поновити" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d пакунків" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Коста-Ріка" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Програма для резервування і відновлення\n" "\n" "--default : записати типові теки.\n" "--debug : показати всі повідомлення при відлагодженні.\n" "--show-conf : показати список файлів або тек для резервування.\n" "--config-info : пояснити параметри конфігураційного файла (не для " "користувачів Х.\n" "--daemon : використовувати службу конфігурації. \n" "--help : показати це повідомлення.\n" "--version : показати номер версії.\n" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "Потрібна автентикація домена" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "Використовувати libsafe для сервера" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "Ісландська" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Використання: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Найбільший розмір,\n" " дозволений для Drakbackup (Мб)" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Замикаюче монтування %s\n" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Режим Lilo/grub" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Мартініка" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "Твердий диск / NFS" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "Старий список користувачів:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "Шукати резервні копії" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "число" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Шведська" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Який драйвер %s мені спробувати?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" "Ви отримаєте повідомлення, якщо один з вибраних сервісів більше не " "працюватиме" #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "Будні" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Типи файлових систем:" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Північні Маріанські острови" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", багатофункціональний пристрій на HP JetDirect" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "нічого" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "Назва профілю для створення (новий профіль створюється як копія вже " "існуючого):" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "Дискета" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "створення зв'язків Ghostscript" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "Завантажувач" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Дозволити всі сервіси, що контролюються tcp_wrappers" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Перемістити" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "Використовувати завантажувач" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "Назва машини SMB-сервера" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "Сервери назв:" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "Хвилина" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Попередження\n" "\n" "Будь ласка, уважно прочитайте умови, подані далі. Якщо Ви не\n" "погоджуєтесь з будь-якою частиною, Вам не дозволяється встановлювати\n" "наступний компакт-диск. Натисніть на Відмовитися для того, щоб\n" "продовжити встановлення без використання цього носія.\n" "\n" "Деякі компоненти на наступному компакт-диску не керуються ліцензією\n" "GPL чи подібною до неї. В такому випадку кожен із компонентів\n" "керується своєю специфічною ліцензією. Будь ласка, прочитайте уважно і\n" "дотримуйтесь умов такої специфічної ліцензії перш, ніж користуватися\n" "або перерозповсюджувати таку компоненту. Такі ліцензії у більшості\n" "випадків забороняють передачу, копіювання (крім створення резервної\n" "копії), перерозповсюдження, зворотню інженерію, дизасемблювання,\n" "декомпіляцію чи модифікацію компоненти. Будь-яке порушення ліцензії\n" "негайно припиняє Ваші права щодо компоненти. Якщо специфічно не\n" "вказано про надання таких прав, Ви не маєте права встановлювати ці\n" "програми на більш, ніж одній системі, або пристосовувати їх для\n" "установки в мережі. Якщо Ви маєте сумніви щодо ліцензії, зверніться\n" "безпосередньо до дистрибютора чи редактора такої компоненти. Передача\n" "таких компонент (включаючи документацію) третім особам у більшості\n" "випадків заборонена. \n" "\n" "Всі авторські права компонент на наступному компакт-диску застережені\n" "за їх відповідними авторами і захищаються законами про охорону\n" "авторських прав, які мають право застосовуватися до програмних\n" "продуктів.\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Expert mode" msgstr "/Експертний режим" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Вилучити цю друкарку з Star Office/OpenOffice.org/GIMP" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server використовується для побудови високонадійного\n" "сервера з високою продуктивністю." #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Мікронезія" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 мільйярди кольорів (32 біт)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "Ліцензія" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "Генерація ключів займе певний час." #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "Тут Ви можете встановити рівень безпеки і адміністратора Вашої машини.\n" "\n" "\n" "Адміністратор безпеки є єдиним, хто отримуватиме попередження безпеки,\n" "якщо встановлено параметр 'Попередження безпеки'. Він може бути іменем\n" "користувача або електронною адресою.\n" "\n" "\n" "Меню Рівень безпеки дає змогу вибрати один із шести попередньо\n" "налаштованих рівнів, які забезпечуються msec. Вони охоплюють діапазон\n" "від дуже низького і легкого у використанні рівня безпеки до " "параноїдального,\n" "який використовується для дуже чутливих серверних задач:\n" "\n" "\n" " Дуже низький: практично не захищає,\n" "але дуже легкий у використанні. Повинен використовуватися у машинах,\n" "не під'єднаних до мереж і недоступних для інших.\n" "\n" "\n" " Стандартний: Це стандартний рівень\n" "безпеки, який рекомендується для комп'ютера, який буде під'єднано до\n" "мережі Інтернет як клієнта.\n" "\n" "\n" " Високий: Використовуються деякі\n" "обмеження, кожної ночі виконуються автоматичні перевірки.\n" "\n" "\n" " Найвищий: Рвіень безпеки достатньо\n" "високий, щоб використовувати систему в якості сервера, який має\n" "з'єднання з багатьма клієнтами. Якщо Ваша машина є тільки клієнтом\n" "мережі Інтернет, можете вибрати нижчий рівень.\n" "\n" "\n" " Параноїдальний: Подібний до\n" "попереднього рівня, але система є закритою і параметри безпеки\n" "виставлені по максимуму." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Автовизначення друкарки (Місцеві, TCP/Socket і SMB друкарки)" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (використовуючи pppoa) usb" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Сталася помилка - не знайдено відповідних пристроїв для створення нових " "файлових систем. Перевірте, будь-ласка, свою систему і спробуйте відшукати " "причину цього." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "Запуск системи друку під час завантаження" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Чи Ви хочете виконувати з'єднання при завантаженні системи?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "ID процесора" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "Вирішення проблем зі звуком" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Польська (розкладка qwerty)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Add Printer" msgstr "/Додати друкарку" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Drakbackup виконується на КД:\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Ви встановлюєте систему друку %s на систему, запущену з рівнем безпеки %s.\n" "\n" "Система друку запускає службу (фоновий процес), яка очікує на завдання друку " "і керує ними. Ця служба також доступна для віддалених машин по мережі і " "через це є можливою ціллю для атак. Тому на цьому рівні безпеки типово " "запускаються тільки декілька вибраних сервісів.\n" "\n" "Ви дійсно хочете налаштувати друк на цій машині?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "Машина \"%s\", порт %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Цей розділ не може використовуватися для зворотнього монтування" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Файл вже існує. Користуватися ним?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "отримано: " #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "Права клавіша Alt" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "список альтернативних драйверів для цієї звукової карти" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Шлюз" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Тонга" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Туніс" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "Спільний доступ до сканера" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "Профіль: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Клацніть на пристрої в лівому дереві, щоб тут побачити інформацію про нього." #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "Дозволити/Заборонити автореєстрацію." #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV не встановлено!" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Не включати важливі файли (passwd, group, fstab)" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "в пакунку dev використовується назва старого статичного пристрою" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "Увімкнути ведення журналу підозрілих пакунків IPv4" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Ця етикетка вже використовується" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Ласкаво просимо до Помічника встановлення друкарки\n" "\n" "Цей Помічник допоможе Вам встановити друкарки, під'єднані до цього " "комп'ютера, або під'єднані безпосередньо до мережі.\n" "\n" "Якщо Ви маєте друкарки, під'єднані до цієї машини, будь-ласка, увімкніть їх, " "щоб їх можна було автоматично визначити. Так само, Ваші мережеві друкарки " "повинні бути під'єднані і ввімкнені.\n" "\n" "Зауважте, що автоматичне визначення друкарок в мережі виконується значно " "довше, ніж автоматичне визначення тільки друкарок, під'єднаних до цієї " "машини. Тому вимкніть автоматичне визначення мережевих друкарок, якщо вони " "Вам не потрібні.\n" "\n" "Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо Ви не хочите " "зараз встановлювати свої друкарки." #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "Грецька (політонічна)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Після форматування розділу %s всі дані на ньому будуть втрачені" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "Час з'єднання: " #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Будь-ласка, вставте компакт-диск встановлення і натисніть Гаразд. Якщо Ви не " "маєте такого диску, натисніть Скасувати, щоб не робити поновлення." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "Використовувати код групи для виконання" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Виберіть стандартного користувача:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Ґабон" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Друкарки на віддаленому сервері CUPS не потрібно налаштовувати зараз;\n" "ці друкарки будуть визначені автоматично." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Лінакс Мандрейк може підтримувати багато мов. Виберіть\n" "мови, які Ви хочете встановити. Вони стануть доступними\n" "після завершення встановлення і перезавантаження системи." #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "Тека (або модуль) для розміщення резервної копії на цю машину." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "Домен" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Уточніть об'єм RAM, якщо потрібно (знайдено %d Мб)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" "LILO і grub є завантажувачами GNU/Linux. Цей етап є повністю\n" "автоматизованим. DrakX проаналізує завантажувальний сектор диску\n" "і відповідно до знайденого на ньому виконає таке:\n" "\n" " * якщо знайдено сектор завантаження Windows, він замінить його на сектор\n" "завантаження grub/LILO. В такий спосіб Ви зможете завантажувати як\n" "GNU/Linux, так і іншу ОС.\n" "\n" " * якщо знайдено сектор завантаження grub або LILO, його буде замінено на\n" "новий.\n" "\n" "Якщо неможливо зробити визначення, DrakX запитає Вас, куди встановити\n" "завантажувач." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "2й DNS провайдера (необов'язково)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Пристрій завантаження" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Розмір якого розділу Ви хочете змінити?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Острови Сполучених Штатів Америки" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Джибуті" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "Засіб доглядання Ваших журнальних файлів" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "знайдено на порту %s" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Графічна плата: %s\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/Set as _Default" msgstr "/Встановити типовим" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "Прийняти ехо icmp" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Типу Logitech CC з емуляцією коліщатка" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Розширені розділи не підтримуються на цій платформі." #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "Вибір заставки" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "Конфіґурація ISDN" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "високий" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "Доступ до з'єднання з інтернетом" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Виберіть файл" #: ../../standalone/drakbug:1 #, c-format msgid "Summary: " msgstr "Загалом: " #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Увага! Знайдено існуючу конфіґурацію захисного шлюза. Можливо, Вам потрібно\n" "буде вручну виконати деякі зміни після встановлення." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Друк/Доступ до фотокарток на \"%s\"" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "Щоденна перевірка безпеки" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Чи хочете Ви зробити можливим друк на друкарках, перелічених вище або на " "друкарках в місцевій мережі?\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "Типові налаштування друкарки" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Звичайна миша PS2 з коліщатком" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "прапорець WP регістра CR0 процесора встановлює захист від запису на рівень " "сторінки пам'яті, таким чином, процесором вмикається захист неперевіреного " "доступу з ядра до пам'яті користувача (отже, це захист від багів)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Вилучається стара друкарка \"%s\"..." #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "Виберіть пристрій !" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "Вилучити виділений сервер" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (використовуючи dhcp) usb" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Французькі Південні Території" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "назва виробника процесора" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - Формування %s:\n" " \t\tДля користувачів, які можуть реєструватися в системі з " "бездискових клієнтів, параметри в\n" " \t\t/etc/shadow needs повинні бути повторені в %s. drakTermServ " "допоможе\n" " \t\tстосовно цього додавати і вилучати системних користувачів з " "цього файла." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Потрібно зробити резервну копію всіх даних на цьому розділі" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Встановлюється пакунок %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "Перевіряється пристрій і налаштовується HPOJ..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Щоб мати більше розділів, зітріть один з них, щоб створити розширений розділ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Ваша друкарка була налаштована автоматично, щоб надати доступ до дисків з " "фотокартками з ПК. Зараз Ви можете мати доступ до фотокарток з допомогою " "графічної програми \"MtoolsFM\" (меню: \"Програми\" -> \"Файлові інструменти" "\" -> \"Файловий менеджер Mtools\") або утиліти для командного рядка \"mtools" "\" (введіть в командному рядку \"man mtools\" для отримання додаткової " "інформації). Ви знайдете файловую систему з картками під буквою \"p:\" або " "під наступними буквами диска, якщо у Вас бульше, ніж одна друкарка HP с " "дисками фотокарток. В \"MtoolsFM\" Ви можете перемикатися між буквами дисків " "в полі, розташованому в правому верхньому куті списка файлів." #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Виберіть пакунки для встановлення" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "ВСІ існуючі розділи та всі дані на диску %s будуть втрачені" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "У Вашій системі не залишилось достатньо вільного місця для установки\n" "чи поновлення (%d > %d )" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Кожна друкарки повинна мати назву (наприклад, \"друкарка\"). Поля Опис та " "Розташування заповнювати необов'язково. Вони є лиш коментарями для " "користувачів." #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" "\"%s\": натиснення кнопки \"%s\" запускає Помічника налаштування\n" "друкарки. Зверніться до відповідного розділу ``Starter Guide'' для " "додаткової\n" "інформації про встановлення нової друкарки. Показаний там інтерфейс\n" "подібний до того, що використовується при встановленні." #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Бутан" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Інтерфейс мережі" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "Від'єднання від інтернету завершилося невдало." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "Читаю дані друкарки..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "Корейська клавіатура" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Не з'єднано" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Конфігурація з'єднання з інтернетом" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Грецька" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Св. Кітс і Невіс" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Звичайна 3х кнопкова миша з емуляцією коліщатка" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "Дозволити завантаження OF?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS не можна користуватися на розділах, менших за 16 Мб." #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Стерти носія RW (1-ий сеанс)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Частота вертикальної розгортки монітора: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Точка монтування" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Сталася помилка:\n" "%s\n" "Спробуйте змінити деякі параметри" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "Машина TCP/IP \"%s\", порт %s" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "Користувач :" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "Відновити систему" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Це перелік машин, на яких можуть бути доступними локально приєднані сканери:" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "Кінцева IP-адреса DHCP" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "Ще один" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Колумбія" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Поточна конфігурація '%s':\n" "\n" "Мережа: %s\n" "IP-адреса: %s\n" "IP-атрибути: %s\n" "Драйвер: %s" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Реюніон" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Подробиці" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "З міркувань безпеки зараз з'єднання буде розірвано." #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "Програма для синхронізації" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "Перевіряється Ваша система..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "Друкувати" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Вставте стрічку з міткою тома %s\n" "в пристрій %s" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Монголія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Змонтований\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS" msgstr "Налаштувати CUPS" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "Графічний інтерфейс" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "Відновити користувачів" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "Ключ шифрування для %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to recover your system?" msgstr "Чи Ви хочете відновити систему?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper керує з'єднаннями з протоколом RPC, які використовуються\n" "такими протоколами, як NFS та NIS. portmaper повинен працювати на\n" "машинах, які є серверами для протоколів, що користуються RPC." #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "Знайдене залізо" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Маврикій" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "Мьянма (Бірманська)" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "Активізується swap-розділ %s" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Немає розділу FAT для використання як пристрою зворотнього монтування (або " "не вистачає вільного місця)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Вірменська (стара)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Друкарка з назвою \"%s\" вже існує в \"%s\". Натисніть \"Перенести\" щоб\n" "переписати її визначення. Ви можете також ввести нову назву чи\n" "пропустити цю друкарку." #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" "Вирішіть Ваші проблеми з допомогою служби прямої підтримки MandrakeSoft." #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr ", машина \"%s\", порт %s" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Монако" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Розбиття на розділи невдале: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s форматування %s невдале" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "Канадська (кабель)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "Створення дискети завершено" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "Поновлення" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "Робоча станція" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Встановлюється пакунок %s\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Киргизстан" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "Багатоцільовий пристрій на USB" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "Із загальною документацією" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron служить для періодичного виконання команд." #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Ви повинні мати розділ root.\n" "Для цього створіть новий розділ (або клацніть на вже\n" "існуючому). Після цього виберіть ``Точка монтування'' і встановіть її в `/'" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Західна Сахара" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Назва проксі має починатися з http://..." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Південа Африка" #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "Вийняти плівку після резервування" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Floppy/ISO для завантаження з мережі" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "Змінити конфігурацію друкарки" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Виберіть розділ" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "Виправити поточне правило" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "%s" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Випробуйте мишу, будь-ласка" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Не поновлювати час доступу до інодів цієї файлової системи (напр., \n" "для прискорення серверів новин і швидшого доступу до повідомлень)." #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 кнопки з емуляцією коліщатка" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "Закріплюючий біт" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "Інший носій" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "Резервувати системні файли" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Сектор" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Катар" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Ви не можете вибрати цей пакунок, бо для його встановлення не залишилося " "достатньо вільного місця." #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "створити дискету автовстановлення" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Режим зв'язку через модем" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "Спільний доступ до файла" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Очищати /tmp при кожному перезавантаженні" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Малаві" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: false" msgstr "local config: false" #: ../../standalone/drakperm:1 #, c-format msgid "System settings" msgstr "Системні встановлення" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "Будь-ласка, вкажіть тип Вашої миші." #: ../../services.pm:1 #, c-format msgid "running" msgstr "виконується" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "клас пристрою" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Це машини і мережі, в яких локально під'єднані друкарки повинні бути " "доступні:" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Об'єднане Королівство" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "Індонезія" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "стандартний" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "Франція [SECAM]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "обмежити" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "повинен мати" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS не підтримує друкарки на серверах Novell чи друкарок, що передають дані " "на друк у вигляді команд з довільним синтаксисом.\n" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Сенегал" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "Командний рядок" #: ../advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" "Повний діапазон рішень на базі Лінакс, а також спеціальні пропозиції на " "програми та інші продукти, доступні в нашому електронному магазині:" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "Березень" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "доступ до виконавчих файлів" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "Помилка при відсиланні пошти.\n" " Вашого листа з повідомленням не було відправлено.\n" " Будь-ласка, налаштуйте відсилання пошти" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Не дозволяти встановлювати біти set-user-identifier, або set-group-" "identifier.\n" "(Вони здаються безпечними, але все змінюється після встановлення\n" "suidperl(1))." #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Монсеррат" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "Автоматичні залежності" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../standalone/drakperm:1 #, c-format msgid "Custom settings" msgstr "Типові встановлення" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "Відновити інші" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "Телевізійна плата" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Друкарка на сервері SMB/Windows 95/98/NT " #: ../../standalone/printerdrake:1 #, c-format msgid "/_Configure CUPS" msgstr "/Налаштувати CUPS" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "Надати lspci" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "Вилучити вибрану машину/мережу" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix - це програма для передачі електронної пошти, яка передає поштові " "повідомлення від одного комп'ютера до іншого." #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "Узбецька (кирилиця)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Тут Ви можете вибрати клавішу або комбінацію клавіш, якими Ви будете\n" "перемикати різні розкладки клавіатури (наприклад, англійську і українську)" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "Network Hotplugging" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "якщо встановлено в так, то повідомляє про результат перевірки на tty." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "Відновити з КД" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Ви підійшли до налаштування організації спільного доступу до інтернет з " "Вашого комп'ютера.\n" "З цією можливістю інші комп'ютери місцевої мережі зможуть використовувати " "з'єднання з інтернетом цього комп'ютера.\n" "\n" "Перш, ніж продовжувати, переконайтеся, що Ви налаштували доступ до мережі/" "інтернета з допомогою drakconnect \n" "\n" "Примітка: Вам для цього потрібно мати плату мережі, щоб встановити\n" "місцеву мережу (LAN)." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Виберіть, яку плату мережі Ви хочете використати для з'єднання з\n" "Інтернетом" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" "Доступ до карт пам'яті фото на Вашому багатофункціональному пристрої HP" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" "Покращіть продуктивність Вашого комп'ютера з допомогою вибору сумісних з " "Лінакс Мандрейк професійних рішень від наших партнерів" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "Автори: " #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Спільне користування з'єднанням з інтернетом вимкнене." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "якщо встановлено в так, перевіряє контрольну суму файлів suid/sgid." #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Латиноамериканська" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "Режим друку тексту японською мовою" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "Старий файл пристрою" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Інформація: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Кнопка `%s': %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Зачекайте, будь-ласка" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "Нічого" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "Введений IP неправильний.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Будь-ласка, переконайтеся, що служба cron включена до Ваших сервісів." #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Плата Ethernet" #: ../../standalone/printerdrake:1 #, c-format msgid "Delete selected printer" msgstr "Видалити вибрану друкарку" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Інформація" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Встановлення" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Натисніть \"%s\", якщо Ви хочете стерти всі дані і розділи на цьому\n" "твердому диску. Будьте уважні, після натиснення на \"%s\" Ви\n" "не зможете відновити жодних даних і розділів на цьому твердому\n" "диску, включаючи також будь-які дані Віндовс.\n" "\n" "Натисніть \"%s\", щоб зупинити цю операцію без втрати даних і\n" "розділів, які знаходяться на цьому твердому диску." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Вийти з встановлення" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Все сконфіґуровано.\n" "Зараз Ви можете надати доступ до інтернета іншим комп'ютерам Вашої місцевої " "мережі, використовуючи автоматичне конфіґурування мережі (DHCP)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "Віддалений сервер CUPS" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Миша Sun" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "У Вашій системі є тільки один адаптер мережі:\n" "\n" "%s\n" "\n" "Зараз буде встановлена місцева мережа з цим адаптером." #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "Надати cpuinfo" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "Мінімальне встановлення" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Ефіопія" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "ТАК" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "Увімкнути \"crontab\" і \"at\" для користувачів" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "Деванагарі" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- пристрої pci: це визначає PCI-слот, пристрій і призначення карти\n" "- пристрої eide: пристрій є або вторинним, або головним\n" "- пристрої scsi: ідентифікатори шини і пристрою scsi" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Загальний розмір: %d / %d Мб " #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "відімкнено" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "Шукати нові сканери" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "Заборона серверів..." #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Установка %s неуспішна. Сталася наступна помилка:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Неможливо запустити mkinitrd -f /boot/initrd-%s.img %s." #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Ви вибрали такі(ий) сервер(и): %s\n" "\n" "\n" "Ці сервери стандартно активізовані. Для них невідомі будь-які проблеми з\n" "безпекою, але деякі можуть бути виявлені. В такому випадку Ви повинні\n" "якомога швидше поновити версії цих серверів. \n" "\n" "\n" "Ви хочете дозволити встановлення цих серверів?\n" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Мережева друкарка (TCP/Socket)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "Резервуються файли користувача..." #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Встановити систему" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Перший сервер DNS (необов'язково)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "Як альтернативу Ви можете вказати назву_пристрою/назву_файла в рядку вводу" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Якщо SERVER_LEVEL (або SECURE_LEVEL, якщо немає)\n" "є більшим за 3 в /etc/security/msec/security.conf, створює\n" "посилання на /etc/security/msec/server, щоб помістити в\n" "/etc/security/msec/server..\n" "\n" "/etc/security/msec/server використовується chkconfig --додайте, якщо\n" "вирішете додати службу, якщо він є у файлі під час встановлення\n" "пакунків." #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "Російська (фонетична)" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "Налаштовується dhcpd..." #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Встановлення LILO/grub" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "Ізраїльська" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Друкарка \"%s\" на сервері \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "Тепер дискета може бути вилучена" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "Насправді мінімальне встановлення" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Данія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Переміщаю розділ..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "IP адреса цього (DHCP) сервера" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Тестування конфіґурації" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "Встановлення %s ..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "Якщо Ви вказали програмі встановлення, що хочете мати індивідуальний\n" "вибір пакунків, Вам буде показано повне дерево пакунків, зібраних за\n" "групами і підгрупами. Переглядаючи дерево, Ви зможете вибрати повні\n" "групи, підгрупи та індивідуальні пакунки.\n" "\n" "Кожного разу, коли Ви вибираєте пакунок в дереві, справа з'являється\n" "підказка про призначення пакунка.\n" "\n" "!! Якщо було вибрано серверний пакунок, чи то шляхом спеціального\n" "вибору індивідуального пакунка, чи він є складовою частиною групи\n" "пакунків, Вам буде задане запитання, чи Ви справді бажаєте встановити\n" "ці сервери. В Лінакс Мандрейк всі встановлені сервери автоматично\n" "запускаються при завантаженні системи. Навіть, якщо на час придбання\n" "системи не було відомо жодних проблем з безпекою даних серверів,\n" "можливо, що після встановлення системи такі проблеми буде виявлено.\n" "Якщо Ви не знаєте призначення конкретного сервера або з якою метою\n" "його встановлено, натисніть \"%s\". Якщо Ви натиснете \"%s\", буде\n" "встановлено перелічені сервери і вони будуть стартувати автоматично під\n" "час завантаження !!\n" "\n" "Параметр \"%s\" використовується, щоб заборонити діалог попередження,\n" "який появляється, як тільки програма встановлення автоматично вибирає\n" "пакунки для задоволення залежностей. Деякі пакунки мають відношення\n" "до інших так, що встановлення пакунка вимагає, щоб інші програми також були\n" "встановлені. Програма встановлення може визначити, які пакунки необхідні\n" "для задоволення залежностей, щоб успішно завершити встановлення.\n" "\n" "Маленька піктограма дискети внизу списка дозволяє завантажити з дискети\n" "список, створений при попередньому встановленні. Це зручно використовувати,\n" "якщо є певна кількість машин, що мають бути сконфігуровані однаково.\n" "Після натискання цієї кнопки, система попросить Вас вставити попередньо\n" "створену дискету в кінці іншого встановлення. Перегляньте другу пораду\n" "останнього кроку про те, як створити таку дискету." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "Виберіть ключ шифрування Вашої файлової системи" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Сьєрра-Леоне" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Ботсвана" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Андорра" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(типове значення: %s)" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Встановлює термін дії пароля в \"max\" днів і затримку зміни в \"inactive\"." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "Додаткова тестова сторінка (Letter)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "Налаштування сервера DHCP.\n" "\n" "Тут Ви можете вибрати різні параметри для налаштування сервера DHCP.\n" "Якщо Ви не знаєте, що означає той чи інший параметр, просто залиште\n" "його без змін.\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "Виберіть X сервер" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Розмір розділу Swap в Мб: " #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "Немає змін для резервування!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Форматований\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "Тип встановлення" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Друкарка \"%s\" на сервері SMB/Windows \"%s\"" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "%d чисел, розділених комами" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Протокол rusers дає можливість отримувати інформацію про те,\n" "хто зареєстрований на іншій машині, що відповідає на запити." #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "Конфіґурація кроків установки" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Барбадос" #: ../advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" "Хочете більше дізнатися і зробити свій внесок в товариство розробників " "програм з відкритим кодом? Окуніться в світ Free Software!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "Будь-ласка, вкажіть дані для резервування..." #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "З'єднання завершилося невдало.\n" "Перевірте налаштування в Центрі керування Мандрейк." #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "отримано" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" "Увімкнути su тільки для членів групи wheel, або для будь-якого користувача" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Файл/Новий" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "IP-адреса сервера DNS" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "Кінець діапазона IP:" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Високий" #: ../../standalone/printerdrake:1 #, c-format msgid "Add a new printer to the system" msgstr "Додати нову друкарку до системи" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "БезВідео" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "це поле описує пристрій" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Додається друкарка до Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "Місцеві друкарки" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "Тека з образом для встановлення" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "Сервер NIS" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "Порт: %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Іспанія" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "локальна конфігурація: %s" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Таке ім'я користувача вже створене раніше" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "Виберіть файл" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Застосувати" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "Автоматично визначити наявні порти" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "Сан Маріно" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Спільне користування з'єднанням з інтернетом вимкнене" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Бельгія" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Кувейт" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Виберіть менеджер вікон, яким Ви хочете користуватися:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "Грудень" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "покоління процесора" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "Помічник першого запуску" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "Тайвань" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Пакістан" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "будь ласка, зачекайте, проходження файла: %s" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Сталася помилка, але я не знаю, як з нею поводитися.\n" "Продовжуйте на свій власний ризик." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "Важливість: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Щоб могти друкувати на струменевій друкарці Lexmark при цій конфігурації Вам " "потрібно встановити драйвери, що надає Lexmark (http://www.lexmark.com/). " "Натисніть на посиланні \"Drivers\". Потім виберіть модель і після всього " "\"Linux\" як операційну систему. Драйвери надаються у вигляді пакунків RPM " "або скриптів командної оболонки і діалоговим графічним встановленням. Вам " "немає потреби виконувати налаштування з допомогою графічної оболонки. " "Відмініть його одразу після ліцензійної угоди. Тоді надрукуйте сторінки для " "регулювання друкуючої головки з допомогою \"lexmarkmaintain\" і " "підкоректуйте з допомогою цієї програми розташування головки." #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "Права доступу" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Назва провайдера (тобто provider.net)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Ваша система має замало ресурсів. Ви можете мати проблеми з встановленням\n" "Мандрейк Лінакса. Якщо це станеться, Ви можете спробувати встановлення в\n" "текстовому режимі. Для цього під час завантаження з компакт-диску\n" "натисніть F1 і потім введіть \"text\"." #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Використовувати розділ Windows для зворотнього монтування" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Вірменська (друкарська машинка)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Тип з'єднання: " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "Графічний інтерфейс" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Чад" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "Індія" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s з апаратним прискоренням трьохвимірної графіки" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Словаччина" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Сінгапур" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Камбоджа" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Горизонтальна синхронізація монітора: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "Шлях" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "НЕ ЗНАЙДЕНО" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Тут Ви можете вказати будь-який командний рядок, в який повинно бути " "переспрямоване завдання замість відсилання безпосередньо на друкарку." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Система друку (%s) не буде стартувати автоматично при запуску машини.\n" "\n" "Можливо, автоматичний запуск було відімкнено при переході на вищий рівень " "безпеки, оскільки система друку є потенційним об'єктом атак.\n" "\n" "Чи хочете Ви знову увімкнути автоматичний старт системи друку?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Друкарка %s\n" "Що Ви хочете змінити для цієї друкарки?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "Додати машину" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Якщо Ви справді вважаєте, що знаєте, який драйвер підходить для Вашоїкарти,\n" "можете вибрати його із списку зверху.\n" "\n" "Теперішнім драйвером для Вашої звукової карти \"%s\" є \"%s\" " #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Чи хотіли б Ви дозволити користувачам надавати доступ до деяких з їхніх " "тек? \n" "Такий дозвіл дасть можливість користувачам просто натискати на \"доступ\" в " "konqueror та nautilus.\n" "\n" "\"Вибірково\" дозволяє надати доступ окремим користувачам \n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Будь ласка, виберіть, завантажити чи записати вибір пакунків на дискету.\n" "Формат дискети такий самий, як дискети auto_install." #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "No CDROM support" msgstr "Підтримка радіо:" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "Китай" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "Використовувати квоти для резервних файлів." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Налаштовується друкарка \"%s\"..." #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Не дозволяти виконання бінарних файлів у змонтованій файловій системі.\n" "Цей параметр може використовуватися для сервера, який має файлову\n" "систему, який містить бінарні файли для іншої архітектури." #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "З'єднання з тенетами" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Завантаження модуля %s неуспішне.\n" "Хочете спробувати інші параметри?" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "Ласкаво просимо в світ програм з відкритим кодом." #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Боснія та Герцеговина" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Для цієї точки монтування потрібна реальна файлова система (ext2/ext3,\n" "reiserfs, xfs, or jfs)\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Вам потрібно ввести або назву машини, або IP-адресу.\n" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Голандія" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "Відсилаються файли по FTP" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Внутрішня плата ISDN" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Для Вашої звукової карти (%s), яка в даний момент використовує \"%s\", немає " "альтернативного драйвера OSS/ALSA." #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "Заголовок" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "Встановлення і конвертування шрифтів" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "ПОПЕРЕДЖЕННЯ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "Встановлюю блок завантаження" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "повторити" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "знайдено %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect є розширенням скриптової мови Tcl, яка дозволяє діалогові сеанси без " "участі користувача." #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Віргінські острови (США)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Поганий резервний файл" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Встановлення доступу до з'єднання з інтернетом вже\n" "було зроблене. Доступ в даний момент вимкнено.\n" "\n" "Що Ви бажаєте зробити?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Введіть IP-адресу і порт машини, друкарки якої Ви хочете використовувати." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "передати через канал в команду" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Деякі з апаратних засобів на Вашому комп'ютері вимагають драйверів\n" "фірм-виготовлювачів для того, щоб працювати вірно. \n" "\n" "Ви можете знайти потрібну інформацію про них на: %s" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Гаїті" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Визначаю пристрої..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "Вибірково дає змогу Вам вказати свої дату і час. Інші параметри " "використовують run-parts в /etc/crontab." #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Опис полів:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "Basic options" msgstr "Основні параметри" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "назва CPU" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "Прийняти повідомлення про фіктивні помилки IPv4" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "Поновлюю дані друкарок ..." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "Вам потрібно також відформатувати %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Обережно: ця операція небезпечна." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "Вставте дискету, що містить вибір пакунків" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "Сервер: " #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "Попередження безпеки:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Швеція" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "Використовувати Expect для SSH" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Польща" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "Інші порти" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "кількість буферів для захоплення з допомогою mmap" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid " - detected" msgstr "знайдено" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "Контролери SMBus" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "Затримка перед закриттям зв'язку (сек)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Деякі з ранніх чіпів i486DX-100 не могли точно повертатися в робочий режим " "після використання інструкції \"halt\"" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Хорватська" #: ../../help.pm:1 #, c-format msgid "Use existing partition" msgstr "Використовувати існуючий розділ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "Неможливо з'єднатися з дзеркалом %s" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Довідка/Про..." #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "Видалити теки користувача перед відновленням." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Ви збираєтесь налаштувати віддалену друкарку. Для цього необхідний доступ до " "працюючої мережі, але Ваша мережа ще не налаштована. Якщо Ви продовжите без " "налаштування мережі, Ви не зможете використовувати друкарку, яку зараз " "налаштовуєте. Як Ви хочете продовжувати?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "Налаштування друкарки CUPS" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "не вдалося знайти жодного шрифта у змонтованих розділах" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "Помилка F00f" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "Назва домена:" #: ../../security/l10n.pm:1 #, c-format msgid "Root umask" msgstr "Маска користувача root" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "На дискету" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "Перезавантаження консольним користувачем" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "Відновити" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Server:" msgstr "Сервер: " #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "якщо встановлено в так, перевіряє, чи мережеві пристрої працюють в " "різнотипних режимах." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Шукаю наявні пакунки..." #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "Повідомлення ініціалізації" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Аварійна таблиця розділів" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Кіпр" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "З'єднання завершене." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Видалити з RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Цей пароль занадто простий (він повинен бути хоча б %d літер завдовжки)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "Помічники налаштування" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "З'єднання ISDN" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "первинний" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " на сервері SMB/Windows \"%s\", ресурс \"%s\"" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Цей діалог використовується, щоб вибрати, які сервіси будуть запускатися\n" "автоматично при старті системи. \n" "\n" "DrakX надасть список всіх служб, можливих при цьому встановленні.\n" "Перегляньте уважно ці служби і відмініть вибір тих, які не повинні\n" "запускатися при старті системи.\n" "\n" "При виборі служби появляється короткий текст з поясненням про неї.\n" "Проте, якщо Ви не впевнені, чи потрібно використовувати якусь службу,\n" "залишіть запропонований вибір.\n" "\n" "!! Будьте особливо уважними, якщо Ви збираєтесь використовувати цю\n" "систему як сервер: можливо, не потрібно стартувати служби, які Вам\n" "не потрібні. Пам'ятайте, будь-ласка, що деякі увімкнені служби можуть\n" "бути небезпечними на сервері. Одним словом, вибирайте тільки ті служби,\n" "які Вам дійсно необхідні.\n" "!!" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Ніуе" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Пропустити" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Вмикає/Вимикає всі інтерфейси мережі, налаштовані\n" "стартувати при завантаженні системи." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "частота процесора в МГц (мегагерцах, які в першому наближенні можуть бути " "наближено порівняні з числом інструкцій, які процесор може виконати за одну " "секунду)" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "важливий" #: ../../standalone/printerdrake:1 #, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "Інструмент керування друкарками Mandrake Linux" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "Загальний поступ" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "Спочатку DrakX спробує відшукати всі тверді диски на Вашому\n" "комп'ютері. Також він зробить пошук одної або більше карт PCI SCSI.\n" "Якщо DrakX знайде плату SCSI, то автоматично встановить для неї\n" "драйвер.\n" "\n" "Через те, що визначення заліза не є простим, DrakX може завершити\n" "визначення твердих дисків невдало. Якщо таке трапиться, Вам потрібно\n" "буде ввести тип обладнання вручну.\n" "\n" "Якщо Вам потрібно буде вручну вибирати драйвер, DrakX запитає,\n" "чи хочете Ви налаштувати його параметри. Краще, якщо Ви вкажете\n" "DrakX випробувати плату з особливими для неї параметрами, потрібними\n" "для ініціалізації адаптера. У більшості випадків це працює нормально.\n" "\n" "Якщо DrakX не зможе встановити тип параметрів, необхідних для\n" "передачі обладнанню, Вам потрібно буде налаштувати драйвер вручну." #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Аруба" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "Користувачі" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Підготовлюю завантажувач..." #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "Шлюз (напр. %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Паролі не співпадають" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "Приклади правильних IP:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the media for backup." msgstr "Виберіть, будь ласка, носія для резервування." #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "Частота (МГц)" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Для того, щоб використати записаний вибір пакунків, завантажте\n" "систему з ``linux defcfg=floppy''" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "номер процесора" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "Годинник встановлено в GMT" #: ../../network/isdn.pm:1 #, c-format msgid "Do you want to start a new configuration ?" msgstr "Чи хочете Ви випробувати нову конфіґурацію?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Вкажіть назву файла" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Виберіть, до якого послідовного порта під'єднана Ваша друкарка." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Змініть компакт-диск" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Парагвай" #: ../../network/netconnect.pm:1 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Налаштування завершене. Чи хочете Ви застосувати зміни ?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" "Використовувати Наростаючі/Різницеві резервування (не замінювати попередні " "копії)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" " - Обслуговування /etc/dhcpd.conf:\n" " \t\tДля завантаження мережевих клієнтів кожен з них повинен мати " "запис в dhcpd.conf, що задає IP-адресу\n" " \t\tі мережеві образи завантаження для машини. drakTermServ " "допомогає створювати/знищувати такі записи.\n" "\t\t\t\n" " \t\t(PCI карти можуть обійтися без образа - etherboot пошле запит на " "правильний образ. Вам потрібно\n" " \t\tтакож знати, що коли etherboot шукає образи, то очікує знайти " "назви типу\n" " \t\tboot-3c59x.nbi перш, ніж boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tТиповий запис в dhcpd.conf для підтримання бездискових клієнтів " "виглядає так:" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Немає відомого драйвера для Вашої звукової плати (%s)" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "примусово" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Вийти" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "ПРИМІТКА: Залежно від моделі друкарки і системи друку буде встановлено до %d " "Мб додаткових програм." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "У вас немає жодного сконфіґурованого інтерфейса.\n" "Сконфіґуруйте їх спочатку, клацнувши на 'Налаштувати'" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Естонська" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache - це сервер для World Wide Web. Він використовується з файлами HTML " "та CGI." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "Введіть назву пристрою для запису КД\n" " ex: 0,1,0" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "ВСІ" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "Додати/Вилучити клієнтів" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Виберіть інтерфейс мережі" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "Невідома модель" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "Записувачі CD/DVD" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Типовий розділ для завантаження системи\n" " (для завантаження ДОСу, не для lilo)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Увімкнути \"%s\", щоб читати файл" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "виберіть образ" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Знайдено конфіґурацію firewall!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Назва зв'язку" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "координата x текстового вікна\n" "в кількості символів" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" "Можливо, Ви не зможете встановити lilo (оскільки lilo не підтримує LV на " "множині PV)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "Поновлення вибору пакунків" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Де Ви хочете змонтувати файл зворотнього монтування %s?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Дискета створена успішно.\n" "Тепер Ви зможете повторити встановлення." #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Використовувати CD/DVDROM для резервування" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "кількість кнопок миші" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "Повторити" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "Резервувати інші файли" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Немає привода дискети" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "Резервні файли пошкоджені" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "Формат ТБ:" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "Сімейство cpu" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 Мб" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: thin" msgstr "Тип: тонкий" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Литовська AZERTY (нова)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" "так означає, що арифметичний співпроцесор має вмонтований вектор виняткових " "операцій" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "В якості розділа для root (/) Ви вибрали програмний RAID.\n" "Немає завантажувачів, які могли б працювати з такими розділами без /boot.\n" "Тож, будь-ласка, не забудьте додати розділ /boot." #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Інші системи (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Щоб активізувати мишу, " #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Вмикаю мережу" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Знімки екрану стануть можливими після встановвлення в %s" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "На Вашому диску знайдено більше одного розділа Майкрософт.\n" "Виберіть, будь-ласка, розмір якого з них Ви хотіли б змінити, для\n" "того, щоб встановити операційну систем Мандрейк Лінакс.\n" "\n" "Кожен розділ подано в такому вигляді: \"Назва в Лінаксі\", \"Назва у\n" "Віндовс\", \"Розмір\".\n" "\n" "\"Назва в Лінаксі\" подана таким чином: \"тип твердого диску\",\n" "\"номер твердого диску\", \"номер розділу на диску\", (наприклад:\n" "\"hda1\").\n" "\n" "Тип твердого диску\" - це \"hd\", якщо Ви маєте диск типу IDE, і \"sd\",\n" "якщо Ви маєте твердий диск типу SCSI.\n" "\n" "\"Номер твердого диску\" - це завжди літера після \"hd\" чи \"sd\". Для\n" "дисків типу IDE це:\n" "\n" " * \"a\" - головний диск (master) на першому контролері IDE,\n" "\n" " * \"b\" - вторинний (slave) диск на першому контролері IDE,\n" "\n" " * \"c\" - головний диск на другому контролері IDE,\n" "\n" " * \"d\" - вторинний диск на другому контролері IDE.\n" "\n" "Для SCSI дисків \"a\" означає \"головний диск\", \"b\" - другорядний диск, " "і\n" "т.д. ...\n" "\n" "\"Назва у Віндовс\" - це літера Вашого твердого диску, як Ви її бачите\n" "при роботі у Віндовс (перший диск чи розділ називається \"C:\")." #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "Танзанія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Обчислюю межі розділу FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Джерела резервування:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "спеціальний" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Зміст файла" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "Автентикація LDAP" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "Дозвольте мені підібрати драйвера" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "передано" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "Палестина" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "%d розділених комою рядків" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr " isdn" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "Тут наведено повний список наявних клавіатур" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "Назва теми" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/Довідка" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "Вибір довільного драйвера" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Острови Кука" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Тут Ви можете вказати, чи приєднані до цієї машини сканери можуть бути " "доступними до віддалених машин, і до яких саме." #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "ширина індикатора поступу" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Форматування розділу %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "Потрібна назва машини" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "Зняти виділення з встановлених шрифтів" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Коліщатко" #: ../../standalone/drakbug:1 #, c-format msgid "Submit kernel version" msgstr "Надати версію ядра" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Скасувати" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "Йде пошук налаштованих сканерів ..." #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "Відеокарта" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tДля резервування використовується tar і bzip2\n" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "Вилучити вибрані" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "/Автовизначення модемів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "Вилучити друкарку" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "Переглянути останній запис у журналі" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Яким службам Ви б хотіли дозволити з'єднання з інтернетом?" #: ../../standalone/printerdrake:1 #, c-format msgid "Connection Type" msgstr "Тип приєднання" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Ласкаво просимо до конфіґураційної програми для пошти.\n" "\n" "Тут Ви можете встановити систему оповіщення.\n" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "Інші" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "Основна" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "Емуляція 2 клавіш" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter a package name." msgstr "Введіть, будь-ласка, назву пакунка." #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "Виконати перевірки chkrootkit" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "створення type1inst" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "Abiword" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "виберіть файл образу" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X сервер" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "Ім'я користувача - адміністратора домена" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Сталася помилка під час сканування ТБ-каналів" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "Клавіатура США (міжнародна)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "Не встановлено" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "Обидві клавіші Alt одночасно" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "З'єднання через місцеву мережу" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Файл/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "Італійська" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "Основний" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/92errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Гондурас" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "pdq" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "В/В картки" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Samba server" msgstr "Сервер Samba" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Це спеціальний розділ для \n" "можливості подвійного \n" "завантаження системи.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Вкажіть, будь ласка, для кожного кроку, чи він буде повторений, як при " "встановленні, чи виконається вручну" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Тут Ви можете також вирішити, чи сканери з віддалених машин будуть " "доступними на цій машині." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Мережа по FTP.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "Повідомляти результати перевірки по tty" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "Вам потрібно ввести пристрій або назву файла!" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/Вийти" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Відео пам'ять: %sкб\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Ця програма є безкоштовною; Ви можете розповсюджувати її та/або\n" "змінювати її згідно умов загальної публічної ліцензії GNU, опублікованої\n" "фундацією безкоштовних програм; версії 2 або будь-якої пізнішої.\n" "\n" "Ця програма розповсюджується з надією, що може бути придатною, але\n" "БЕЗ БУДЬ-ЯКОЇ ГАРАНТІЇ; навіть без припущення гарантії ПРАЦЕЗДАТНОСТІ\n" "або ПРИДАТНОСТІ ДЛЯ КОНКРЕТНОЇ МЕТИ. Деталі дивіться в загальній\n" "публічній ліцензії GNU.\n" "\n" "Ви повинні були отримати копію загальної публічної ліцензії GNU разом з " "цією\n" "програмою; якщо ні - напишіть у Free Software Foundation, Inc.,\n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "доступ до інструментів компіляції" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Global statistics" msgstr "Статистика" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "Вкажіть, будь-ласка, дані для відновлення..." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Якщо Ви збираєтесь користуватися aboot, не забудьте залишити вільний\n" "розділ (достатньо 2048 секторів) на початку диску" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "Стандартна тестова сторінка" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Time Zone" msgstr "Часовий пояс" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Створити" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "Що" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Сталася помилка під час сортування пакунків: " #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "Болгарська (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "Вимкнути сервер" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "Ключ шифрування файлової системи" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "Ґуджараті" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" "\t\t\tНе дивлячись на те, що Вам може більше подобатися використовувати " "сукупність IP-адрес, ніж описувати окремі параметри для \n" "\t\t\tклієнтської машини, використання схеми фіксованих адрес полегшує " "використання функціональності\n" "\t\t\tспецифічних для кожного клієнта конфігураційних файлів, які надає " "ClusterNFS.\n" "\t\t\t\n" "\t\t\tЗауважте: Параметр \"#type\" використовується тільки drakTermServ. " "Клієнти можуть бути або 'тонкими',\n" "\t\t\tабо 'товстими'. Тонкі клієнти запускають більшість програм на сервері " "з допомогою xdmcp, а товсті клієнти запускають \n" "\t\t\tбільшість програм на клієнтській машині. Для тонкого клієнта написаний " "спеціальний inittab, %s.\n" "\t\t\tЯкщо використовується тонкий клієнт, то системні конфігураційні файли " "xdm-config, kdmr іgdm.conf \n" "\t\t\tмодифікуються, щоб активізувати xdmcp. Оскільки існують питаннябезпеки " "при використанні \n" "\t\t\txdmcp, hosts.deny and hosts.allow повинні бути модифіковані, щоб " "обмежити доступ до місцевої\n" "\t\t\tпідмережі.\n" "\t\t\t\n" "\t\t\tПримітка: Параметр \"#hdw_config\" також використовується тільки " "drakTermServ. Клієнти можуть бути або\n" "\t\t\t'true', або 'false'. 'true' робить можливою реєстрацію root на машині " "клієнта і дозволяє локальне \n" "\t\t\tналаштування конфігурації звуку, миші та X, використовуючи інструменти " "'drak'. Це забезпечується \n" "\t\t\tшляхом створення окремих конфігураційних файлів, які відносяться до " "клієнтських IP-адрес, а також \n" "\t\t\tточок монтування для читання/запису, щоб дозволити клієнтам змінювати " "файл. Після того, як Вас влаштує створена \n" "\t\t\tконфігурація, Ви можете забрати у клієнта права реєстрації як root.\n" "\t\t\t\n" "\t\t\tПримітка: Ви повинні зупинити/запустити сервер після додавання або " "зміни клієнтів." #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Будь-ласка, виберіть перше число з 10-значного діапазону,\n" "яке Ви хочете змінити, або просто натисніть Enter для продовження.\n" "Ваш вибір?" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" msgstr "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "Зберегти тему" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Бразилія" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "Автовстановлення" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Помічник налаштування мережі" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "Автоматичне монтування змінних носіїв" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "Друк" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "Введіть теку, щоб зберегти:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Не знайдено друкарок, під'єднаних безпосередньо до Вашої машини" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Створити новий розділ" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "Драйвер:" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "невідома" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Використовувати fdisk" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "ПОСУНЬТЕ КОЛІЩАТКО!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "відіслано: " #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Автоматична IP" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "Ось і все. Встановлення завершене і Ваша система GNU/Linux готова\n" "до використання. Просто натисніть \"%s\" для перезавантаження.\n" "Перше, що Ви побачите після завершення системою тестів обладнання,\n" "буде меню завантажувача, яке дасть Вам вибір операційної системи для\n" "запуску.\n" "\n" "Кнопка \"%s\"покаже дві інші кнопки для:\n" "\n" " * \"%s\": для створення дискети для встановлення, яка автоматично без " "допомоги\n" "оператора виконає все встановлення, подібне до того, яке Ви щойно зробили.\n" "\n" " Зауважте, що після натиснення на кнопку будуть можливі два різні " "параметри:\n" "\n" " * \"%s\". Це частково автоматизоване встановлення. Етап розбиття на " "розділи\n" "є тільки діалоговою процедурою.\n" "\n" " * \"%s\". Повністю автоматизоване встановлення: твердий диск повністю\n" "перезаписується, всі дані втрачаються.\n" "\n" " Цей параметр є дуже зручним при встановленні на багато подібних машин.\n" "Дивіться розділ Auto install на нашому веб-сайті для детальної інформації.\n" "\n" " * \"%s\"(*): зберігає список пакунків, вибраних при цьому встановленні.\n" "Щоб використати цей вибір при іншому встановленні, вставте дискету і\n" "запустіть встановлення. При підказці натисніть клавішу [F1] і введіть " ">>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) Вам потрібно мати дискету у форматі FAT (щоб створити таку в GNU/Linux\n" "введіть \"mformat a:\")" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Молдавія" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "Налаштування віддаленої друкарки" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "Онлайновий комплекс для забезпечення потреб підтримки компаній." #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Адреса (URL) має починатися з 'ftp:' або 'http:'" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "Орія" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "Додати нове правило в кінець" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "Встановлення тем LiLo і Bootsplash успішно завершено" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Тут Ви також можете прийняти рішення, чи друкарки на віддалених машинах " "стануть автоматично доступними на цій машині." #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Ви можете тепер передати параметри в модуль %s.\n" "Параметри мають формат ``назва=величина назва2=величина2 ...''.\n" "Наприклад, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Вийти без запису таблиці розділів?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "на твердому диску" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "Встановлюються пакунки..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Голандська" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Ангола" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "Наступні пакунки повинні бути встановлені:\n" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "налаштування сервіса" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Спеціальний" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Латвія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "" "Файл вже використовується іншим пристроєм зворотнього монтування, виберіть " "інший" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "Тільки для читання" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" "Увімкнути/Вимкнути захист маскування назв. Якщо\n" "\"alert\" встановлено в true, також робиться звіт в syslog." #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "Немає відомого драйвера" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 Мб" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Якщо це не те, що Ви хочете налаштувати, введіть назву_пристрою/ назву_файла " "в рядку вводу" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "На Вашій машині не знайдено звукових плат. Будь-ласка, перевірте, щоб " "звукова карта, що підтримується Лінаксом, була правильно вставлена.\n" "\n" "\n" "Ви можете відвідати нашу базу даних обладнання на:\n" "\n" "\n" "http://www.linux-mandrake.com/ru/hardware.php3" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Налаштувати місцеву мережу..." #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Запустити звукову систему на Вашій машині" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Перевірити контрольну суму файлів suid/sgid" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "Виконати деякі перевірки бази даних rpm" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "Виконати" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "Готується база даних друкарок..." #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "Інформація" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "Немає мережевої плати" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "Трьох кнопочна" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Яку файлову систему Ви хочете?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Мальта" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Детальна інформація" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Типові встановлення друкарки\n" "\n" "Вам потрібно переконатися, що розмір сторінки та тип_чорнила/режим_друку " "(якщо існують), а також апаратні налаштування лазерних друкарок (пам'ять, " "спарений модуль, додаткові податчики) встановлені вірно. Зауважте, що " "швидкість друку з високою якістю/роздільністю може бути значно повільнішою." #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "Ця дискета не відформатована як FAT" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Налаштовується мережа" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Цей параметр зберігатиме змінені файли. Точна поведінка залежить від того, " "який режим вибрано - наростаючий чи різницевий." #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "Графічна карта" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Зміна розміру розділу Windows" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Камерун" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "1й DNS провайдера (необов'язково)" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Тепер Ви можете розбити диск %s на розділи.\n" "Після того, як закінчите, не забудьте виконати команду `w'" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "Saami (шведська/фінська)" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "Закрити" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" "\"%s\": перевірити поточний вибір країни. Якщо Ви знаходитесь не\n" "в цій країні, натисніть кнопку \"%s\" і виберіть іншу країну. Якщо Вашої " "країни\n" "не показано в першому переліку, натисніть \"%s\", щоб отримати повний\n" "список країн." #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Календар" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "Відновити вибраний\n" "пункт каталога" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Щоб використовувати віддалену lpd-друкарку, Вам потрібно вказати назву\n" "сервера друкарки та назву друкарки на цьому сервері." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Ісландія" #: ../../standalone/drakconnect:1 #, c-format msgid "Network & Internet Configuration" msgstr "Конфігурація мережі і інтернету" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "немає consolehelper" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "зупинено" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Чи має FPU вектор irq" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Розширити дерево" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "Старий драйвер \"%s\" занесено в чорний список.\n" "\n" "Про нього створено звіт, щоб попередити ядро при вивантаженні.\n" "\n" "Новий драйвер \"%s\" буде використано тільки при наступному початковому\n" "завантаженні." #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "Експертний режим" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Параметри друкарки" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "Адреса місцевої мережі" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Резервувати системні файли (тека /etc)" #: ../../security/help.pm:1 #, c-format msgid "Set the user umask." msgstr "Встановити маску користувача." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Зараз Ви маєте можливість звантажити поновлені пакунки. Ці пакунки\n" "було поновлено після виходу дистрибутиву. Вони можуть містити\n" "виправлення безпеки або помилок.\n" "\n" "Щоб звантажити ці пакунки, Вам потрібно мати працююче з'єднання з\n" "інтернетом.\n" "\n" "Ви хочете встановити ці поновлення?" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "Сервер Samba" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "Австралійське кабельне ТБ Optus" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / між елементами | вибір | наступний екран" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "Підмережа:" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Зімбабве" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "Коли" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "Вам потрібний Alcatel microcode.\n" "Звантажте його з:\n" "%s\n" "і скопіюйте mgmt.o в /usr/share/speedtouch" #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "Година" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "Другий сервер DNS (необов'язково)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Фінляндія" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Глибина кольору: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Вибір цього пакунка неможливо відмінити. Він повинен бути поновлений." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "Завантажується з дискети" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "Увімкнути/Вимкнути ведення журналу невідомих пакунків IPv4." #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Словенія" #: ../../standalone/mousedrake:1 #, c-format msgid "Mouse test" msgstr "Тест миші" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Drakperm використовується для перегляду файлів з метою встановлення\n" "прав доступу, власників і груп з допомогою msec.\n" "Ви також можете виправити свої правила, які перезапишуть поточні." #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Введіть користувача\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- пристрої PCI і USB : тут перелічені PCI/USB ідентифікатори виробника, " "пристрою, вторинних виробника і пристрою" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "Вибір кольору індикатора поступу" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Тут наведені пункти меню завантаження.\n" "Ви можете створити додаткові пункти або змінити існуючі." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" "Назва програми,\n" "або повний шлях:" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Виконує команди, заплановані командою at під час виконання команди at\n" "і виконує пакетні команди, коли системне навантаження достатньо\n" "низьке. " #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "Підтримка радіо:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "Встановлюються пакунки SANE..." #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Змінити тип" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr ", друкарка USB #%s" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Встановлення SILO" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Вітання, встановлення завершено. Вийміть з дисководів завантажувальні\n" "носії і потім натисніть Return для перезавантаження системи.\n" "\n" "\n" "Для інформації про виправлені помилки, знайдені в цій версії\n" "Лінакс Мандрейк, зверніться до розділу Errata на сервері\n" "\n" "\n" "%s\n" "\n" "\n" "Інформація про налаштування Вашої системи приведена в " "післявстановлювальному\n" "розділі Офіційного Керівництва Користувача Mandrake Linux." #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "Відновити через мережевий протокол: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "параноїдальний" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "Не відсилати пошту, якщо не перевірена" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Ваші сканери не будуть доступними в мережі." #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "Відсилати після кожного резервування поштове повідомлення на:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Цю команду Ви також можете використовувати в полі \"Команда друку\" діалогу " "друку багатьох програм. Але назви файлів тут не вказуються, тому що файл для " "друку надається програмою.\n" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Роздільна здатність" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Щоб друкувати на SMB-друкарці Вам потрібно вказати назву машини з SMB\n" "(Зауважте! Вона може відрізнятися від його TCP/IP назви!) і, можливо,\n" "IP-адресу сервера друку, так само, як і назву друкарки, доступ до якої " "хочете надати, та будь-яким придатним іменем користувача, паролем, та " "інформацію про робочу групу." #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" " Дозволяє su тільки для членів групи wheel або для будь-якого користувача." #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "переналаштувати" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Ця відеоплата має підтримку апаратного прискорення трьохвимірної\n" "графіки, але тільки для XFree %s, ЗАУВАЖТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" "РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА." #: ../../security/l10n.pm:1 #, c-format msgid "Shell timeout" msgstr "Затримка командної оболонки" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Сервіс xinetd " #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "доступ до мережевих засобів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Звантаження виробника для HP LaserJet 1000" #: ../advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" "І, звичайно ж, використовуйте мультимедіа на всю потужність з допомогою " "найновіших програми для перегляду відео, прослуховування аудіо та збирання " "рисунків і фотографій." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Тут подано список автоматично визначених друкарок. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Помилка при встановленні aboot,\n" "спробувати встановити примусово, навіть якщо це зруйнує перший розділ?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Відновити вибрані\n" "файли" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s існує, видалити?\n" "\n" "Попередження: якщо Ви вже виконали цей процес, Вам,\n" "можливо, потрібно буде видалити запис з authorized_keys\n" "на сервері." #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Будь-ласка, заповніть або виберіть поле внизу" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Чи хочете Ви зберегти зміни в /etc/fstab?" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "Протокол завантаження" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "Диски LVM %s\n" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "При завантаженні" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "Необхідний пакунок %s. Встановити його?" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "Ідентифікація шини" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "Ватикан" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Будь-ласка, створіть спочатку резерну копію Ваших даних" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "У Вас більше одного диску. На який з них Ви хочете встановити Лінакс?" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Еритрея" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "Boot ISO" #: ../../network/adsl.pm:1 #, c-format msgid "Firmware needed" msgstr "Потрібна програма виробника" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "Видалити список" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "Налаштовуване середовище" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "Inuktitut" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "Деякі протоколи, як rsync, можуть бути сконфігуровані в кінці сервера. " "Краще, ніж вказування шляху, Ви можете використовувати назву 'модуля' для " "шляху до служби." #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Марокко" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "Яку модель друкарки Ви маєте?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "Додати нову друкарку" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr " Всі вибрані Вами дані були " #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Непал" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- Видалити" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "процесор # " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "розмір ділянки" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Якщо встановлено у \"ВСЕ\", /etc/issue і /etc/issue.net are можуть " "існувати.\n" "\n" "Якщо встановлено в НІ, issue не дозволені.\n" "\n" "Інакше дозволено /etc/issue." #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "Увімкнути/Вимкнути sulogin(8) на однокористувацькому рівні." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" "komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Проблеми при встановленні пакунка %s" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Ви отримаєте повідомлення, якщо завантаження вище за цю величину" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "Додати сканера вручну" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "Поновити" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Перечитати таблицю розділів" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" "Так, я хочу автоматично реєструватися в системі з цим (іменем, стільницею)" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Selected" msgstr "Відновити вибране" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "Шукати шрифти в списку встановлених" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "Місцева мережа не завершується з `.0', виходжу геть." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "Завантажити" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr " і КД знаходиться в приводі" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "Тип тюнера :" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" "Зараз настав час вибрати систему друку на Вашому комп'ютері. Інші ОС мають\n" "одну систему друку, але Лінакс Мандрейк пропонує дві. Кожна система\n" "друку найкраще підходить до різних типів конфігурації.\n" "\n" " * \"%s\" -- який є акронімом для ``друкувати, не ставити в чергу'', є " "вибором, коли\n" "Ви маєте безпосередньо під'єднану друкарку і не хочете мати проблем із\n" "заминанням паперу, і не маєте мережевих друкарок. (\"%s\" керуватиме тільки\n" "дуже простими випадками з мережею і є в деякій мірі повільнішим, ніж\n" "використання з мережами). Рекомендується використовувати \"pdq\", якщо\n" "це Ваш перший досвід використання GNU/Linux.\n" "\n" " * \"%s\" - `` Загальна система друку для Лінакс'', є відміннім вибором для " "друку\n" "на місцеву друкарку або на іншу в будь-якій точці планети. Вона проста для\n" "налаштування і може працювати як клієнт або сервер для старих систем друку\n" "\"lpd \", тобто є сумісною з попередніми операційними системами, які можуть\n" "все ще вимагати сервісів друку. Хоч вона і є дуже потужною, загальне\n" "встановлення є майже таким самим простим, як і \"pdq\". Якщо Вам потрібно\n" "емулювати сервер \"lpd\", переконайтеся, що увімкнена служба \"cups-lpd \".\n" "\"%s\" має графічну оболонку для друку або вибору параметрів друкарки і\n" "управління нею.\n" " \n" "Якщо Ви зараз зробите вибір, а пізніше побачите, що ця система друку Вам\n" "не подобається, Ви можете її замінити з допомогою PrinterDrake з Центру\n" "керування Мандрейк, натиснувши кнопку Експерт." #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "Клавіша \"Меню\"" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "Будь-ласка, переконайтеся, чи правильно Printerdrake визначив модель Вашої " "друкарки. Знайдіть правильну модель в списку, якщо вибрано неправильну або " "\"Друкарку необроблених даних\"." #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "Адміністротар з безпеки:" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" "Встановити затримку командного процесора. Нульова величина означає " "відсутність затримки." #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "Копіювання програми виробника завершилося успішно" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "якщо встановлено в так, то перевіряє права доступу до файлів у домівці " "користувача." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Ви не маєте жодного з'єднання з інтернетом.\n" "Створіть таке з'єднання, клацнувши на \"Налаштувати\"" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "Копія шрифтів" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Автоматизована" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Чи хочете Ви випробувати нову конфіґурацію?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" "Друкарку \"%s\" було успішно видалено з Star Office/OpenOffice.org/GIMP." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Зберегти вибір пакунків" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "/Дії" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "Видалити останній пункт" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Список користувачів для відновлення (важлива тільки остання дата для " "користувача)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "Не створено образів мережевих завантажувачів!" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "використовувати pptp" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" "Виберіть, які сервіси мають стартувати автоматично при завантаженні системи" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "Перевірити файли/теки, доступні для запису всім" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "Вивчити, як використовувати цю друкарку" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "Налаштувати мережу зараз" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Виберіть сервер, з якого звантажити пакунки" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Програма зміни розміру розділу FAT не може працювати з Вашим\n" "розділом, при роботі сталася така помилка: %s" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: " msgstr "Розмір: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "На який сектор Ви хочете його перемістити?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Багами" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Ви хочете натиснути на цю кнопку?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "Налаштування вручну" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "пошук" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Цей пакунок завантажує вибрану розкладку клавіатури, яка встановлюється\n" "в /etc/sysconfig/keyboard. Ця клавіатура може бути вибрана за\n" "допомогою програми kbdconfig. Краще залишити цей пакунок працюючим на\n" "більшості систем." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (драйвер відображення встановлення)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Назва машини Zeroconf не повинна містити крапку." #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr " Приймати/Відкидати icmp echo." #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "syslog - це сервіс в системі, за допомогою якого багато служб записують\n" "системні повідомлення у різні системні файли реєстрації повідомлень. В\n" "будь-якій системі непогано мати syslog." #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "Невідомий/Інші" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "Не знайдено карт ТБ!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Параметри" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Друкарку \"%s\" зараз встановлено основною." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Ви налаштовуєте лазерну Віндовс-друкарку Oki. Ці друкарки\n" "використовують дуже особливий протокол обміну і через це можуть працювати " "тільки на першому паралельному порті. Якщо Вашу друкарку під'єднано до " "іншого порта або до сервера друку, під'єднайте її до першого паралельного " "порта перед друком тестової сторінки. В іншому випадку друкарка не буде " "працювати. Таке під'єднання буде проігнороване драйвером." #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "покоління процесора (напр. 8 для PentiumIII, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "Користуватися автовизначенням" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Ви налаштовуєте Ваш комп'ютер для встановлення сервера PXE, як і DHCP\n" "сервера і сервера TFTP, щоб створити інсталяційний сервер.\n" "З цією можливістю можна здійснювати встановлення на інші комп'ютери\n" "місцевої мережі, використовуючи цей як джерело.\n" "\n" "Перед тим, як робити щось далі, переконайтеся, що Ви налаштували доступ до " "мережі/інтернету.\n" "\n" "Примітка: Вам потрібно мати плату мережі, щоб налаштувати\n" "місцеву мережу (LAN)." #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) була першою звуковою API. Це назалежний від " "операційної системи API звуку (використовується на більшості юніксових " "систем), але має дуже загальний і обмежений API.\n" "Більше того, всі драйвери OSS видумують нове колесо.\n" "\n" "ALSA (Advanced Linux Sound Architecture) є архітектурою з модулями, яка\n" "підтримує широкий спектр карт ISA, USB і PCI.\n" "\n" "Вона також надає API багато вищого рівня, ніж OSS.\n" "\n" "Використовуючи alsa, Ви можете мати:\n" "- сумісність з старим api OSS\n" "- новий api ALSA, який надає багато розширених можливостей, але вимагає " "використання бібліотеки ALSA.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Не вистачає вільного місця для 1МБ завантажувального блоку! Встановлення\n" "буде продовжуватись, але для завантаження своєї системи Вам потрібно\n" "буде створити DiskDrake'ом завантажувальний розділ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Будь-ласка, виберіть друкарку, яку Ви хочете встановити, або введіть назву " "пристрою/файла в рядку вводу" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Відкинути" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "МІСЦЕВИЙ" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake виконує тестування апаратного забезпечення і, якщо потрібно,\n" "конфіґурує нове або змінене апаратне забезпечення." #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "Створюю та форматую файл %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "якщо встановлено в так, помітьте додатки/переміщувані файлів sgid." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "Друкарка HP LaserJet 1000 вимагає програми виробника, що завантажується з " "віддаленої машини після увімкнення. Звантажте пакунок з драйверами Віндовс з " "веб-сайта HP (програми з фірмових КД не працюють) і вилучіть необхідний файл " "шляхом розпакування файла '.exe' з допомогою програми 'unzip', шукаючи файл " "'sihp1000.img'. Скопіюйте цей файл в теку /etc/ printer'. Там його буде " "знайдено автоматичним скриптом при завантаженні з віддаленої машини кожного " "разу при приєднанні і увімкненні.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Виберіть існуючий LVM, до якого додати" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "перезапуск xfs" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Друкарка з назвою \"%s\" вже існує.\n" "Ви дійсно бажаєте переписати її конфіґурацію?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "Використовувати сканери на машинах: " #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "Скасувати весь вибір" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "Немає розділів" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Management \n" msgstr "Керування друкарками \n" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "Розпізнавач назв домену" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "Ключ шифрування (знову)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "Немає назви спільного ресурсу samba!" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "Встановлення True Type виконано" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "Триває автовизначення" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "Зібрати ціле ядро -->" #: ../../network/netconnect.pm:1 #, c-format msgid "modem" msgstr "модем" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "Ласкаво просимо до %s" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "Ця програма безкоштовна і може розповсюджуватися згідно умов Загальної " "публічної ліцензії GNU\n" "\n" "Використання: \n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Вставте дискету Поновлення Модулів в пристрій %s" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "Bootsplash" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Наступна друкарка\n" "\n" "%s%s\n" "під'єднана безпосередньо до Вашої системи" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Доступ до друкарок на машинах/в мережі: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Команда \"%s\" також дає змогу змінити установки параметрів для окремого " "завдання друку. Просто додайте бажане значення в командний рядок, напр. \"%s " "\". " #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "DrakClock" msgstr "Drakbackup" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "В деяких випадках драйвер %s вимагає додаткової інформації для того,\n" "щоб вірно працювати, хоча звичайно працює нормально без неї. Чи не\n" "хотіли б Ви вказати додаткові параметри для нього чи дозволити драйверу\n" "протестувати Вашу систему, щоб знайти потрібну інформацію? Інколи таке\n" "тестування може призвести до зависання комп'ютера, але не повинно\n" "зашкодити йому." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "Неправильна мітка КД. Диск помічено як %s." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Служба %s за посередництвом:\n" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Куба" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "Жовтень" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Беліз" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "Йде пошук нових друкарок..." #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr " (багатосесійний)" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Затримка при завантаженні ядра" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ваша відеоплата може мати апаратне прискорення тривимірної графіки, \n" "але тільки з сервером XFree %s. Ваша відеоплата підтримується сервером \n" "XFree %s, у якому Ви, можливо, матимете кращу підтримку двовимірної\n" "графіки." #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr " Увімкнути/Вимкнути щоденну перевірку безпеки." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Увімкнути/Вимкнути libsafe, якщо libsafe знайдено в системі." #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Помічник розбивки на розділи DrakX знайшов такі можливі рішення:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Угорська" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Виберіть свого провайдера.\n" "Якщо його немає в списку, виберіть Інший" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Автоматична синхронізація часу (із застосуванням NTP)" #: ../../network/adsl.pm:1 #, c-format msgid "Use my Windows partition" msgstr "Використовувати мій розділ Windows" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 Мб" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "Сервер LDAP" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA підтримка потрібна в основному для забезпечення роботи таких\n" "речей, як ethernet та модем в переносних комп'ютерах. Вони не почнуть\n" "працювати, якщо його не сконфіґуровано, тому краще його встановлювати\n" "на комп'ютерах, які цього не потребують." #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "Виберіть країну" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Системні файли:\n" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "Самостійні інструменти" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "Де" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "але не відповідає" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Тут Ви можете вибрати альтернативний дрейвер (або OSS, або ALSA) для Вашої " "звукової карти (%s)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Конфігурую картки PCMCIA..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "немає kdesu" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s вимагає ім'я користувача...\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "Ключ шифрування" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Ці налаштування буде задіяно після встановлення.\n" "Під час встановлення Вам потрібно буде використовувати праву\n" "клавішу Control для перемикання між різними мапами клавіатури." #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Острів Різдва" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Automatic" msgstr "Автоматична IP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "Встановлення завантажувача неуспішне. Сталася наступна помилка:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "Канал EIDE/SCSI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "Встановити друкарку основною" #: ../../standalone/drakbackup:1 #, c-format msgid "Verify that %s is the correct path" msgstr "Перевірте, чи %s є правильним шляхом" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "розділ %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Параноїдальний" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "<-- Видалити користувача" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "Розташування на шині" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "Друкарок не знайдено!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "назва виробника прострою" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Стерти весь диск" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Основна)" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "Автоматична переконфіґурація" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "Швидкість отримування:" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Острови Туркс і Кайкос" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "Немає Ip" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "<- Попередній" #: ../../standalone/drakbackup:1 #, c-format msgid "Transfer Now" msgstr "Перенести вже" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "Встановити пароль користувача і методи розпізнавання мережі" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Перемикнути між простим списком і сортованим по групах" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Теми" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Параметри: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "В даний час Ви використовуєте %s в якості завантажувача.\n" "Клацніть на \"Налаштувати\", щоб стартувати Помічник встановлення." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "Конфігурація Віндовс-друкарки OKI" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Свята Гелена" #: ../../printer/main.pm:1 #, c-format msgid "Parallel port #%s" msgstr "Паралельний порт #%s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "Рівень безпеки" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Деякі кроки не завершені.\n" "\n" "Ви дійсно хочете припинити зараз?" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Судан" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Польська (розкладка qwertz)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "Сірія" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Чи є Ваша друкарка багатофункціональним простроєм від HP або Sony " "(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 з сканером, DeskJet 450, " "Sony IJP-V100), HP PhotoSmart або HP LaserJet 2200?" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Laskavo prosymo do %s - peremykacha operaciynih system!\n" "\n" "Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n" "poki pochne vantazhytysja persha z inh.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Португальська" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Назва файла зворотнього монтування: " #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Адреса DNS-сервера повинна бути у форматі 1.2.3.4" #: ../../keyboard.pm:1 #, c-format msgid "Left Control key" msgstr "Ліва клавіша Control" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "Сербія" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "Нова Зеландія" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Ця тека має залишитися в корені файлової системи" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "в мережі" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "Клавіша CapsLock" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Встановити завантажувач" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Виберіть розмір пам'яті Вашої графічної плати" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Увімкнути/Вимкнути crontab і at для користувачів.\n" "\n" "Помістити дозволених користувачів у /etc/cron.allow і /etc/at.allow\n" "(дивіться man at(1) і crontab(1))." #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" "[ПАРАМЕТРИ]\n" "Програми для під'єднання і слідкування за мережею і інтернетом\n" "\n" "--defaultintf interface : показати цей інтерфейс як типовий\n" "--connect : під'єднатися до інтернета, якщо ще не під'єднано\n" "--disconnect : від'єднатися віж інтернета, якщо вже під'єднано\n" "--force : використовується з (dis)connect : примусово при(від)єднатися.\n" "--status : повертає 1, якщо під'єднано, інакше 0, потім виходить.\n" "--quiet : не бути діалоговим. Використовується з при(від)єднатися." #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "Накопичувач динамічних IP-адрес:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "Назва LVM?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Деякі пристрої в обладнанні класу \"%s\" було видалено:\n" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Знайдені інтерфейси %s %s" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "Завершення встановлення" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "Назва внутрішнього домена" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Перепин картки" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "Програма імпорту і керування шрифтами \n" "--windows_import : імпорувати з усіх доступних розділів Віндовс.\n" "--xls_fonts : показати всі шрифти, які вже існують з xls\n" "--strong : строга перевірка шрифта.\n" "--install : включити будь-який файл шрифта і будь-яку теку.\n" "--uninstall : деінсталювати будь-який шрифт або теку шрифтів.\n" "--replace : замінити всі шрифти, які вже існують\n" "--application : 0 немає програми.\n" " : 1 всі наявні програми, які підтримуються.\n" " : назва_програми, так само для staroffice \n" " : і gs для ghostscript для цього випадку." #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Виберіть дисковод, який Ви хочете використовувати для створення\n" "аварійної дискети" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO з текстовим меню" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "Все (захисного шлюза немає)" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "Ви повинні вказати образ ядра" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr ", багатоцільовий пристрій на USB" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "Виконати" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Зв'язуюсь з сервером, щоб прочитати список наявних пакунків..." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Литовська AZERTY (стара)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Бразілійська (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "IP-адреса машини/мережі:" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "координата y верхнього лівого\n" "кута індикатора поступу" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "Встановлення системи" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Св. Вінсент і Гренадінз" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Дозволити/Заборонити перезавантаження консольним користувачем." #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Файл/_Відкрити" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "Розташування файла auto_install.cfg" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Затримка Open Firmware" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Угорщина" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Нова Зеландія" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "Налаштування кольору" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Вже є деякі обмеження і інші автоматичні перевірки запускаються кожної ночі." #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "будь-ласка, вкажіть дату для відновлення" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Голандські Антильські острови" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Перемикаюсь з ext2 на ext3" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "Переглянути новий архів резервувань." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Ласкаво просимо до Помічника встановлення друкарки\n" "\n" "Цей помічник дасть змогу Вам встановити місцеві або віддалені друкарки для " "використання їх з цієї машини, а також з інших машин в мережі.\n" "\n" "Він запитає у Вас всю необхідну інформацію для встановлення друкарки і " "надасть Вам доступ до всіх наявних драйверів друкарок, параметрів драйверів " "і типів під'єднання друкарок." #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "і %d невідомих друкарок" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Перші чіпи Intel Pentium мали помилку в математичному співпроцесорі, яка не " "забезпечувала необхідної точності при діленні з плаваючою крапкою (FDIV)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" "Перевищено обмеження резервування!\n" "використано %d Mb з виділених %d Mb." #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Не знайдено плати ISDN PCI. Виберіть одну із плат у наступному вікні." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "Ґб" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Дайте, будь-ласка, ім'я користувача" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "Дозволити завантаження з компакт-диску?" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr " введіть `void' для порожнього пункта" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" "Резервні копії на незмонтованому носії - Використовуйте Теку для відновлення" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "Січень" #: ../../security/l10n.pm:1 #, c-format msgid "Password history length" msgstr "Довжина історії пароля" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "З'єднання по вінмодему" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "Вітаємо, тепер Вашу друкарку встановлено і налаштовано!\n" "\n" "Ви можете друкувати, використовуючи команду \"Друк\" своєї програми " "(переважно в меню \"Файл\").\n" "\n" "Якщо Ви захочете додати, видалити або перейменувати друкарку, або якщо Ви " "захочете змінити типові налаштування (лоток для подачі паперу, якість " "друку, ...), виберіть \"Друкарка\" в розділі \"Обладнання\" Центра керування " "Мандрейк." #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Тепер Ви можете запустити xawtv (в X Window!)!\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Не вистачає простору підкачки, закінчити встановлення. Збільшіть\n" "його, будь-ласка" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "%s на %s" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid remote root login." msgstr "Дозволити/Заборонити реєстрацію віддаленого користувача root." #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" "GNU/Linux оперує часом по GMT (середній час по Ґрінвічу) і переводить його\n" "в місцевий час відповідно до часового поясу, який Ви вказали. Якщо годинник\n" "на Вашій материнській платі встановлено в локальний час, Ви можете " "відмінити\n" "\"%s\",що дасть змогу GNU/Linux знати, що системний годинник і апаратний\n" "годинник встановлені на один часовий пояс. Це використовується, коли машина\n" "також може завантажуватися в іншу операційну систему, напр. Віндовс.\n" "\n" "Параметр \"%s\" автоматично наводить годинник шляхом під'єднання до\n" "віддаленого серверу часу в Інтернеті. Щоб ця можливість працювала, Ви\n" "повинні мати працююче з'єднання з Інтернетом. Найкраще вибрати сервер\n" "часу, розташований біля Вас. Цей параметр встановлює сервер часу, який\n" "також може використовуватися іншими машинами у Вашій місцевій мережі." #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "Неможливо створити файл журналу!" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "В якому часовому поясі Ви знаходитесь?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use .backupignore files" msgstr "Використовувати файли .backupignore" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Ґвінея" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "Система зараз з'єднана з інтернетом." #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Південна Джорджія і Південні Сандвічські острови" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "Японія (широке мовлення)" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "Монітор\n" "\n" " Програма встановлення звичайно автоматично виявляє і налаштовує монітор,\n" "під'єднаний до Вашої машини. Якщо вона це зробила неправильно, Ви можете\n" "вибрати правильний монітор з цього списку." #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Мозамбік" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Піктограма" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Kill those programs" msgstr "доступ до X програм" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "Будь-ласка, вкажіть, що Ви хочете резервувати" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "265 кольорів (8 біт)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Запис/читання" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Розмір: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "Назва машини:" #: ../../standalone/drakperm:1 #, c-format msgid "Add a rule" msgstr "Додати правило" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Розмір ділянки %s\n" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "Створюйте майбутнє Лінакса!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "Локальна друкарка" #: ../../network/tools.pm:1 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Помилка доступу до дисковода, неможливо змонтувати пристрій %s" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" "[--file=мій_файл] [--word=моє_слово] [--explain=регулярний_вираз] [--alert]" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "З'єднання ADSL" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Немає конфігурації, будь-ласка, натисніть Помічник або Додатково.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Помилка!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "Знайдено кабельне з'єднання" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Заборонений доступ для переміщення %s в %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/_R Повідомити про помилку" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Домініка" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Змінити розмір" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Роздільна здатність: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Неможливо отримати доступ до модулів ядра, що відповідають Вашому ядру\n" "(немає файла %s), здебільшого це означає, що Ваша дискета для завантаження\n" "не синхронізована з інсталяційним носієм (будь-ласка, створіть новішу\n" "дискету для завантаження)" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Будь-ласка, виберіть вірний порт. Наприклад, порт COM1 у MS\n" "Windows має назву ttyS0 у GNU/Лінаксі." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Наступні пакунки будуть вилучені" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "З'єднатися з інтернетом" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Користуватися існуючими розділами" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Канадська (Квебек)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Миша: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "Вибрати правильні шрифти по-новому" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "Параметри\n" "\n" " Тут можна вказати, чи хочете Ви, щоб графічний інтерфейс вмикався\n" "автоматично при завантаженні системи. Вам потрібно вибрати \"%s\", якщо\n" "Ваша машина буде працювати сервером, або якщо Ви не змогли успішно\n" "налаштувати X." #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "Корпоративний MandrakeExpert" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [everything]\n" " XFdrake [--noauto] монітор\n" " роздільна здатність XFdrake" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "Захист від запису" #: ../../standalone/drakfont:1 #, c-format msgid "You've not selected any font" msgstr "Ви не вибрали жодного шрифта" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Мова" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "Вибір моделі друкарки" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Після зміни типу розділу %s всі дані на ньому будуть втрачені" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "ISDN adapters" msgstr "Карта ISDN" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d секунд" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Вставте чисту дискету в дисковод %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "Потрібно ввести коректний URI!" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "Знайдено інтерфейс \"%s\", хочете використовувати його?" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Переналаштувати інтерфейс і сервер DHCP" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "Конфіґурація звуку" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "Тестова сторінка фотографічної якості" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Спеціальний розподіл диску" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "Введіть назву друкарки і коментарі" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Наступні друкарки\n" "\n" "%s%s\n" "під'єднані безпосередньо до Вашої системи" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "Ви не маєте ніяких вінмодемів" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "тип: %s" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Словацька (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" "Це повинен бути список розділених комою локальних користувачів або " "електронні адреси, яким Ви хочете надсилати результати резервування. Вам " "потрібно буде мати працюючий поштовик, встановлений на Вашій системі." #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "Звукової карти не знайдено!" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Порт миші" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "Перевірити на незахищені рахунки" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Потрібно перезапустити менеджер дисплею для задіяння всіх змін. \n" "(service dm restart - в консолі)." #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "Сервер Ftp" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Уганда" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "перетворення %s шрифтів" #: ../../standalone/harddrake2:1 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "тип шини, до якої під'єднано мишу" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "DrakX пропонує для перегляду підсумкову інформацію, яку він зібрав про\n" "Вашу систему. В залежності від встановленого заліза, у Вас повинні бути або\n" "всі, або деякі пункти. Кожен пункт може бути налаштований, що завершується\n" "коротким підсумком про поточну конфігурацію. Натисніть на відповідну \"%s\"\n" "кнопку, щоб змінити.\n" "\n" " * \"%s\": перевірити поточну розкладку клавіатури і змінити, якщо " "потрібно.\n" "\n" " * \"%s\": перевірити вибір країни. Якщо Ви знаходитесь не в цій країні, " "натисніть\n" "кнопку \"%s\" і виберіть іншу. Якщо Вашої країни немає в показаному " "початковому\n" "списку, натисніть кнопку \"%s\", щоб отримати повний список країн.\n" "\n" " * \"%s\": типово DrakX визначає часовий пояс на основі країни, які Ви " "вибрали.\n" "Ви можете натиснути кнопку \"%s\", якщо його визначено неправильно.\n" "\n" " * \"%s\": перевірте налаштування миші і натисніть на кнопку, щоб змінити,\n" "якщо необхідно.\n" "\n" " * \"%s\": натиснувши на кнопку \"%s\" Ви відкриєте Помічника\n" "налаштування друкарки. Зверніться до відповідного розділу ``Starter\n" "Guide'' для детальнішої інформації про те, як встановити нову друкарку.\n" "Інтерфейс, представлений там, є подібний до того, що використовується\n" "при встановленні.\n" "\n" " * \"%s\": якщо у Ваший системі знайдено звукову карту, вона буде показана\n" "тут. Якщо Ви виявите, що показана звукова карта не є тою, що насправді\n" "встановлена у системі, можете натиснути на кнопку і вибрати інший драйвер.\n" "\n" " * \"%s\": типово DrakX налаштовує графічний інтерфейс з роздільною\n" "здатністю \"800x600\" або \"1024x768\". Якщо це Вас не задовільняє, " "натисніть\n" "\"%s\" щоб переналаштувати графічний інтерфейс.\n" "\n" " * \"%s\": якщо у Вашій системі знайдено карту ТБ, її має бути показано " "тут.\n" "Якщо ж Ви маєте карту ТБ, але її не знайдено, натисніть \"%s\", щоб\n" "спробувати налаштувати її вручну.\n" "\n" " * \"%s\": якщо у Вашій системі знайдено карту ISDN, її має бути показано " "тут.\n" "Ви можете натиснути \"%s\", щоб змінити параметри, пов'язані з картою.\n" "\n" " * \"%s\": Якщо Ви хочете зараз налаштувати доступ до інтернету або " "місцевої\n" "мережі.\n" "\n" " * \"%s\": цей пункт дасть змогу перевизначити рівень безпеки, який " "встановлено\n" "попереднім кроком ().\n" "\n" " * \"%s\": якщо Ви плануєте під'єднати Вашу машину до інтернету, хорошою\n" "ідеєю є захистися від вторгення шляхом встановлення захисного шлюза.\n" "Зверніться до відповідного розділу ``Starter Guide'' для детальнішеї " "інформації\n" "про встановлення захосного шлюза.\n" "\n" " * \"%s\": якщо Ви хочете змінити конфігурацію завантажувача, натисніть цю\n" "кнопку. Це зарезервовано для досвідчених користувачів.\n" "\n" " * \"%s\": тут Ви можете підправити, які служби будуть виконуватися на " "Вашій\n" "машині. Якщо Ви пладуєте використовувати цю машину в якості сервера,\n" "хорошою ідеєю є переглянути ці установки." #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Коморські острови" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "Травень" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Режим Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Звичайна 3х кнопкова миша" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "США (кабель)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "Неможливо перезапустити LiLo!\n" "Запустіть \"lilo\" під root'ом з командного рядка, щоб завершити " "встановлення теми LiLo." #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "Виберіть іншого носія для відновлення" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "Менеджер програм" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "Ще раз відправити" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "КД на місці - продовжити." #: ../../common.pm:1 #, c-format msgid "KB" msgstr "кб" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "Мережа та інтернет" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Литовська \"фонетична\" QWERTY" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "Образи мережевих дисків завантаження" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "Спільний доступ до локальних сканерів" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" "Пошук пристроїв Plug'n'Play завершився невдало. Будь-ласка, виберіть " "відповідний монітор" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "Сервіси та служби" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "Немає назви віддаленої машини!" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "з /usr" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "Мережа" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Автоматичне визначення друкарок, під'єднаних до машин з Microsoft Windows" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Пароль занадто простий" #: ../../security/l10n.pm:1 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig з дотриманням правил msec" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Словацька (QWERTZ)" #: ../advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" "Програмування на різних мовах, таких як перл, пітон, сі і сі++, ще ніколи не " "було таким легким, завдячуючи GNU gcc 3 і кращим середовищам для розробки з " "відкритим кодом." #: ../../standalone/drakbackup:1 #, c-format msgid "No devices found" msgstr "Пристроїв не знайдено" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Насправді мінімальне встановлення (особливо немає urpmi)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "Використовувати службу" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Автентикація" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Додати цю друкарку до Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "Додаткові сервери CUPS: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Виберіть одну із автовизначених друкарок із переліку, або введіть назву " "машини або IP і, необов'язково, номер порта (типово 9100) в полях вводу." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "Де Ви хочете змонтувати пристрій %s?" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Алжир" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "Відновити по мережі" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Розмір Initrd" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "У випадку, якщо Ваша карта підтримує різні сервери з або без 3D\n" "прискоренням, Вам буде запропоновано вибрати сервер, який Вам\n" "найбільше підходить." #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tДля резервування використовуються tar і gzip\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Set as default" msgstr "Встановити типовим" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 Мб" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on this machine" msgstr "Налаштовано на цій машині" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "Обидві клавіші Control одночасно" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr " --help - вивести цю довідку \n" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[ПАРАМЕТР]...\n" " --no-confirmation не запитувати першого підртвердження в режимі " "MandrakeUpdate\n" " --no-verify-rpm не перевіряти підписи пакунків\n" " --changelog-first показувати журнал змін перед списком файлів у вікні " "опису\n" " --merge-all-rpmnew пропонувати об'єднати всі знайдені файли .rpmnew/." "rpmsave" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "Встановлюється типова друкарка..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "Інтерфейс %s (з використанням модуля %s)" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "Готується перегляд..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Freq повинен мати суфікс k, M або G (наприклад, \"2.46G\" для частоти 2.46 " "GHz), або додайте необхідну кількість '0' (нулів)." #: ../../standalone/draksec:1 #, c-format msgid "ignore" msgstr "ігнорувати" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Дозволяє/Забороняє X-з'єднання:\n" "\n" "- ALL (всі з'єднання дозволені),\n" "\n" "- LOCAL (тільки з'єднання з місцевої машини),\n" "\n" "- NONE (немає з'єднань)." #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", багатофункціональний пристрій на паралельном порті #%s" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "послідовний" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Грузинська (латинська розкладка)" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "Отримайте найкращі продукти від стратегічних партнерів Лінакс Мандрейк" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Тепер Ви можете передати параметри в модуль %s.\n" "Зауважте, що будь-які адреси повинні вводитися с префіксом 0x, напр., '0z123'" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Кенія" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Спочатку скористуйтеся ``Розмонтувати''" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "Встановлюються пакунки mtools..." #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "Ви повинні вказати кореневий розділ" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "перший крок створення" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "Обидві клавіші Shift одночасно" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" " --id - завантажити сторінку довідки html, яка відповідає " "id_label\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "Вкажіть модель сканера" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "Прийняти/Відкинути повідомлення про помилку bogus IPv4." #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation (нове покоління)" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "Конфігурація Drakbackup" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Зберегти як.." #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "Корея (Північ)" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Цей інтерфейс ще не було сконфігуровано.\n" "Запустіть в головному вікні Помічника налаштування" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "Конфігурація системи" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "Автореєстрація" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "Пароль адміністратора домена" #: ../advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" "Точно підлаштуйте Ваш комп'ютер до Ваших потреб завдяки наявності в Лінакс " "Мандрейк 11 різних інтерфейсів, які можуть повністю видозмінюватися: KDE " "3.1, GNOME 2.2, Window Maker, ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "Здійснюється конфігурація друкарки ..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Для забезпечення цілісності даних після зміни розміру \n" "розділу(ів), при наступному завантаженні Windows(TM)\n" "буде здійснено перевірку файлової системи" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "Мб" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "якщо встановлено в 'так', виконує деякі перевірки бази даних rpm." #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Віргінські острови (Британія)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Бермуди" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "натисніть тут, якщо Ви впевнені." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Файла конфігурації не знайдено, \n" "будь-ласка, натисніть Помічник або Додатково." #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Тут перелічені вже існуючі розділи, знайдені на Вашому твердому\n" "диску. Ви можете залишити вибір, зроблений Помічником, він підходить\n" "для більшості випадків встановлення. Якщо Ви робите якісь зміни, то " "потрібно\n" "як мінімум створити кореневу файлову систему (/). Не виділяйте\n" "для цього занадто малий розділ, бо інакше Ви не зможете встановити\n" "всі потрібні Вам програми. Якщо Ви бажаєте зберігати всі свої дані в\n" "окремому розділі, потрібно буде також створити розділ \"/home\" (тільки у\n" "випадку, якщо Ви маєте більше одного розділа для Лінакса). \n" "\n" "Кожен розділ показано в такому вигляді: \"Назва\", \"Розмір\".\n" "\n" "Назва розшифровується так: \"тип твердого диску\", \"номер твердого\n" "диску\", \"номер розділу на диску\", (наприклад: \"hda1\").\n" "\n" "\"Тип твердого диску\" - це \"hd\", якщо Ви маєте диск типу IDE, і \"sd\",\n" "якщо Ви маєте твердий диск типу SCSI.\n" "\n" "\"Номер твердого диску\" - це завжди літера після \"hd\" чи \"sd\". Для\n" "дисків типу IDE це:\n" "\n" " * \"a\" - головний диск (master) на першому контролері IDE,\n" "\n" " * \"b\" - вторинний (slave) диск на першому контролері IDE,\n" "\n" " * \"c\" - головний диск на другому контролері IDE,\n" "\n" " * \"d\" - вторинний диск на другому контролері IDE.\n" "\n" "Для SCSI дисків \"a\" означає \"головний диск\", \"b\" - другорядний диск, " "і\n" "т.д. ..." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "Видалити" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Лесото" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "utopia 25" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "Перенаправити роботу по каналу в команду" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Remove system config files" msgstr "Стерти файл зворотнього монтування?" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Кот д'Івуар" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "нова назва динамічного пристрою, згенерована ядром devfs" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Так" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Який протокол Ви хочете використовувати?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "Поступ відновлення" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Естонія" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "У Вас є проміжок в таблиці розділів, але я не можу ним скористуватися.\n" "Єдиним рішенням може бути пересунути Ваші основні розділи так, щоб\n" "проміжок був поруч з розширеними розділами." #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "Виберіть машину, на якій локальні сканери повинні бути доступними:" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "Канал" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Додати" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr " Помилка при відсиланні пошти. \n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Клавіатура" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Вставте компакт-диск з міткою %s\n" "в привід, змонтований в /mnt/cdrom" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "Rate повинен мати суфікс k, M або G (наприклад, \"11M\" для 11M), або " "додайте потрібну кількість '0' (нулів)." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "Виберіть з'єднання, яке Ви хочете налаштувати" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..." #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Конфігурую пристрій мережі %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "увімкнено" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Будь-ласка, вкажіть, який інтерфейс мережі буде використовуватися для " "сервера dhcp." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Шукаю пакунки для поновлення..." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Точка монтування: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "проаналізувати всі шрифти" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid direct root login." msgstr "Дозволити/Заборонити безпосередню реєстрацію користувача root." #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr " Приймати/Відкидати оповіщувальні icmp echo." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "Разом з Х" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Конфіґурація з багатьма головками" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "Немає жодного переглядача. Будь-ласка, встановіть хоч одного" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Зберегти зміни?\n" "Існуюча конфігурація:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Ви не можете використовувати ReiserFS на розділах, менших за 32Мб." #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Протокол rwho видає користувачам на віддалених системах інформацію про\n" "всіх користувачів, зареєстрованих в системі, яка має службу rwho\n" "(подібний до служби finger)." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Назва домену" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "Доступ до місцевих друкарок" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "Увімкнути/Вимкнути libsafe, якщо libsafe знайдено в системі." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "Наявні друкарки" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "НІ" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Порожній" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "ширина тексту" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Де Ви хочете змонтувати пристрій %s?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "Володіння типово (в секундах)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Зараз буде сконфіґуровано з'єднання %s.\n" "\n" "\n" "Натисніть \"%s\" для продовження" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "Інтерфейс\"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "З основною документацією (рекомендується!)" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 кнопка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Є %d невідомих друкарок, прямо під'єднаних до Вашої системи" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Перевірити" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "Корея" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ваш вибір? (типовий %s %s) " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "Друкарка необроблених даних" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "офіційна назва виробника процесора" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "Використання без термінального сервера" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "Виробник" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "Інтерфейс %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Сконфігуруйте мишу" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Виберіть точки монтування" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "Гаразд" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "Югославська (латинська)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Встановлюю" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan з емуляцією коліщатка" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "Запуск userdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "Це встановлення чи поновлення?" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "Карта ISDN" #: ../advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" "Приєднуйтеся до дискусійних форумів на наших сторінках в тенетах для того, " "щоб поділитися знаннями і допомогти розбудовувати програми для Лінакс." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Твердий диск.\n" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" "Цей крок виконується тільки у випадку, якщо на Вашій машині було\n" "знайдено старий розділ GNU/Linux.\n" "\n" "DrakX зараз потрібно знати, чи Ви хочете виконати нове встановлення,\n" "чи поновити існуючу систему Лінакс Мандрейк:\n" "\n" " * \"%s\": В більшій частині це повністю знищує стару систему. Якщо Ви\n" "хочете змінити розбиття твердого диску на розділи або змінити файлову\n" "систему, використовуйте цей параметр. Проте в залежності від схеми\n" "розбиття на розділи Ви можете оберегти деякі з існуючих даних від\n" "переписування.\n" "\n" " * \"%s\": цей тип встановлення дозволяє Вам поновити пакунки, вже\n" "встановлені на Вашій системі Mandrake Linux. Ваша існуюча схема\n" "розбиття на розділи і дані користувачів не змінюються. Більшість інших\n" "кроків встановлення залишаються, подібно до стандартного встановлення.\n" "\n" "Використання параметра ``Поновлення'' працюватиме на системах з Mandrake\n" "Linux версіїі \"8.1\" і пізніших. Виконання поновлення версій, попередніх " "до\n" "Mandrake Linux \"8.1\" не рекомендується." #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (оригінальна версія)\n" " CHAUMETTE Damien \n" "\n" " Ця програма є відкритим програмним продуктом; Ви можете розповсюджувати\n" " і/або змінювати її при умові дотримання Загальної публічної ліцензії GNU,\n" " опублікованої Free Software Foundation, 2-ї версії, або будь-якої іншої (на " "Ваш\n" " вибір) пізнішої версії.\n" "\n" " Ця програма розповсюджується в надії бути корисною, але БЕЗ БУДЬ-\n" " ЯКИХ ГАРАНТІЙ; навіть без очікуваної гарантії ПРАЦЕЗДАТНОСТІ або\n" " ПРИДАТНОСТІ ДЛЯ ОСОБИСТИХ ЦІЛЕЙ. Детальніше дивіться в Загальній\n" " публічній ліцензії GNU.\n" ".\n" " Ви повинні були отримати копію Загальної публічної ліцензії GNU разом\n" " з цією програмою; якщо ні - напишіть в Free Software Foundation, Inc.,\n" " 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" "Подяки:\n" " - pfm2afm: \n" "\t автор Ken Borgendale:\n" "\t Конвертування Windows-файла .pfm в .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t автор James Macnicol: \n" "\t type1inst генерує файли fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t автори Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Конвертує файли шрифтів ttf в шрифти afm и pfb\n" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "Друкарка на віддаленому сервері CUPS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "Видалення друкарки \"%s\" з Star Office/OpenOffice.org/GIMP завершилось " "невдало." #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "сюди, якщо ні." #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "Назва машини DHCP" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "Найдовше володіння (в секундах)" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Виберіть, до якого послідовного порта під'єднано мишу?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "Спрацювало нормально?" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "Монтувати файлову систему в режимі тільки читання." #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Дуже низький" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "Відіслати звіт про результат перевірки поштою" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Ґренада" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "Початковий діапазон DHCP" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Небезпечно" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "SSH server" msgstr "Сервер SSH " #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s секторів" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Ні" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Ґваделупа" #: ../../keyboard.pm:1 #, c-format msgid "Kannada" msgstr "Каннада" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "не вдалося знайти жодного шрифта.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Ви хочете, щоб BackSpace повертав Delete на консолі?" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Частота вертикальної розгортки" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Починається крок `%s'\n" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Нігер" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "Видалення %s ..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Немає друкарки" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "змінити конфігурацію" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "Параметри друкарки NetWare" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "Попередній перегляд Bootsplash %s (%s)" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "Лютий" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Загальні" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* існує" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Додати користувача" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Конфігурація мережі (%d адаптерів)" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "Квітень" #: ../../standalone/drakconnect:1 #, c-format msgid "Deactivate now" msgstr "Деактивізувати зараз" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "Обов'язковий пакунок %s відсутній" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Філіппіни" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "Гаразд" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "Огляд drakTermServ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Назва черги друку" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "Чи Ви хочете використовувати aboot?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Білоруська" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ підтримує тільки локальні друкарки, віддалені друкарки LDP і\n" "друкарки, що працюють через Socket/TCP.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "Перемістити файли в новий розділ" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Додайте тут сервери CUPS, друкарки яких Ви хочете використовувати. Вам " "потрібно це робити тільки тоді, якщо сервери не надсилають інформацію про " "свої друкарки в місцеву мережу." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Ласкаво просимо до Помічника встановлення друкарки\n" "\n" "Цей помічник допоможе Вам встановити друкарки, під'єднані до цього " "комп'ютера.\n" "\n" "Будь-ласка, під'єднайте до цієї машини і увімкніть всі друкарки, щоб вони " "могли бути визначені автоматично.\n" "\n" "Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо Ви не хочете " "зараз встановлювати друкарки." #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Піткерн" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "Відновити з теки" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "монтування розділу %s в теку %s завершилося невдало" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "Екран LILO" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO з графічним меню" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Наближене обчислення" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Вибір цього пакунка неможливо відмінити. Його вже встановлено." #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", друкарка \"%s\" на сервері SMB/Windows \"%s\"" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Все-таки продовжувати?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Здійснюється пошук наявних пакунків і перебудова бази даних rpm..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " Звіт DrakBackup \n" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "Здається, цей носій не є записуваним!" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Вкажіть параметри" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Вануату" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "Новий список користувачів:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Мають бути вказаними або назва сервера, або його IP адреса!" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Спеціально створений диск для завантаження забезпечить Вам можливість\n" "запуску системи незалежно від звичайного завантажувача. Це може\n" "знадобитися у тих випадках, коли Ви не бажаєте встановлювати SILO в\n" "своїй системі, або коли інша операційна система \"перетирає\" SILO, або\n" "коли SILO не працює з новою конфігурацією апаратних засобів. Аварійний\n" "диск може також використовуватися разом з Mandrake аварійним диском,\n" "що робить відновлення від серйозних системних крахів набагато\n" "простішим. \n" "\n" "Якщо Ви бажаєте створити аварійний диск для своєї системи, вставте\n" "дискету в перший дисковод і натисніть \"Гаразд\"." #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Ви не можете використовувати зашифровану файлову систему для точки " "монтування %s" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Встановити довжину історії паролів, щоб уникнути повторного використання " "пароля." #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Норфолкські острови" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "Встановлення тем завершилося невдало!" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "Нічого виконувати" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Використовувати для зворотнього монтування" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "Програма створення звітів про помилки Mandrake" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "Застосувати фільтр" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "використовувати pppoe" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "Переміщення файлів у новий розділ" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" "XFree %s з ЕКСПЕРИМЕНТАЛЬНОЮ підтримкою апаратного прискорення трьохвимірної " "графіки" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Додатково" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "Перенести" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "Дворака (Шведська)" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Афганістан" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "Додаткові параметри" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "Стерти файли tar твердого диску після резервування на іншого носія." #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Бурунді" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron - це стандартна програма UNIX, яка виконує вибрані користувачем\n" "програми періодично у вибраний час. vixie cron додає до стандартного\n" "UNIX cron кілька нових можливостей, включаючи підвищену безпеку та\n" "більш потужні конфігураційні параметри." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "Додати клієнта -->" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Читайте уважно!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "RW" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Будь-ласка,\n" "введіть свій формат ТБ і країну" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Порт" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "Ні (тільки для експертів)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "Не вибрано ядра!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" "Natysnit' enter shchob zavantazhyty vybranu systemu, 'e' shchob redahuvaty" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "Set-GID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "Ключі шифрування не співпадають" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "У випадку багатосесійного CD тільки перший сеанс його зітре. В іншому " "випадку CDRW буде стиратися перед кожним резервуванням." #: ../../printer/main.pm:1 #, c-format msgid "USB printer" msgstr "Друкарка USB" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "Права клавіша \"Windows\"" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "якщо встановлено в 'так', перевіряє порожні паролі в /etc/shadow." #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "Перш, ніж продовжувати, прочитайте уважно умови ліцензії. Вона\n" "стосується всього диструбутиву Мандрейк Лінакс. Якщо Ви\n" "погоджуєтесь з умовами ліцензії, помітьте \"%s\". Якщо ні,\n" "то просто вимкніть комп'ютер." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Тут показано список параметрів друку для поточної друкарки:\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Роздільні здатності" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "Конфігуратор захисного шлюза\n" "\n" "Це налаштовує персонального захисного шлюза для цієї машини з Лінакс\n" "Мандрейк. Для того, щоб встановити більш потужного інтелектуального\n" "захисного шлюза, зверніться, будь ласка, до спеціалізованого\n" "дистрибутива MandrakeSecurity Firewall." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Будь-ласка, введіть своє ім'я користувача, пароль і назву домена, щоб " "отримати доступ до цієї машини." #: ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "Видалити вибрану машину" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Конфігурація мережі" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Автоматично визначати драйвери jaz" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "Немає спільного доступу" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "Перемістити вибране правило на один рівень вниз" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "ТБ" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "ФАТАЛЬНИЙ" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "Поновити список" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - Для кожного клієнта %s:\n" " \t\tЗ clusternfs кожний бездисковий клієнт може мати свої власні " "унікальні файли конфігурації\n" " \t\tв кореневій файловій системі сервера. Дозволяючи локальному " "клієнту налаштування конфігурації, \n" " \t\tdrakTermServ допоможе створити такі файли." #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "Сервер DHCP дозволить іншому комп'ютеру завантажитися з допомогою PXE в " "заданому діапазоні адрес.\n" "\n" "Мережева адреса - %s, маска мережі %s.\n" "\n" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "Видалити" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Я можу налаштувати Вашу систему, щоб графічний інтерфейс (XFree) стартував " "автоматично\n" "після завантаження системи. Чи Ви хочете, щоб XFree стартував автоматично?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Створити диск" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "Від'єднати %s" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Статус:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "Проксі HTTP" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "Сервер SSH " #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Мережа з rsync.\n" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "Європейський протокол" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", друкарка \"%s\" на сервері \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "Зауважте, що зараз усі 'мережеві' носії також використовують твердий диск." #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakboot:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "Помилка" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "дозволити \"su\"" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Австралія" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "будь-ласка, зачекайте, поки виконується ttmkfdir..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Налаштувати тільки плату \"%s\" (%s)" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "Рівень" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "Змінити систему друку" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Ваша система підтримує налаштування багатосекційної головки.\n" "Що Ви хочете зробити?" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "помилка монтування: " #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Налаштувати сервіси" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "Оповіщувальна адреса:" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "ядро GNU/Linux потребує запуску під час завантаження обчислювального циклу, " "щоб ініціалізувати лічильник часу. Його результат зберігається як спосіб " "оцінки продуктивності процесора." #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Образ" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "Віддалене адміністрування" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "Додавання друкарки \"%s\" в Star Office/OpenOffice.org/GIMP завершилось " "невдало." #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" "Підтримки PCMCIA для ядра 2.2 більше немає. Будь-даска, використовуйте\n" "ядро 2.4." #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "Вибрати все" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System (Спільна система друку для Юнікс)" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "Сервіс Webmin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "пристрій" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save to:" msgstr "Виберіть теку для збереження:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "Греція" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Все" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Яку систему друку (чергу) Ви хочете використовувати?" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "Липень" #: ../../printer/main.pm:1 #, c-format msgid "Prints into %s" msgstr "Друкує в %s" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "Сталася помилка" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Цей пакунок повинен бути поновлений\n" "Ви справді хочете відмінити його вибір?" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Тамільська (машинописна мапа)" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "Використовувти пароль для розпізнавання користувачів." #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Дозволити/Заборонити список користувачів системи в менеджерех дисплею (kdm і " "gdm)." #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "вручну" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "Текст назви файла для пошуку:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Виробник друкарки, модель, драйвер" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Немає носія в пристрої %s, або він захищений від запису.\n" "Будь ласка, вставте його." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Тека %s вже містить дані\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "Друкарка на NetWare сервері" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Вкажіть розмір пам'яті в Мб" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "П'ятниця" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet complete." msgstr "Від'єднання від інтернету завершене." #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Дійсна назва" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "виконано" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Будь ласка, відмініть вибір зараз або наступного разу." #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "Підвищений" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Виберіть розділи, які Ви хочете відформатувати" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "На Вашій машині не виявлено ТБ-карт. Будь-ласка, перевірте, чи Linux-сумісну " "Відео/ТБ-карту було правильно вставлено.\n" "\n" "\n" "Ви можете відвідати нашу базу даних обладнання на:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "Не можу знайти %s на %s" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Японська 106 клавіш" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" "Неможливо встановити пакунки, необхідні для організації спільного доступу до " "сканерів." #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "Це займе кілька хвилин" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Буркіна-Фасо" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "Червень" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "Використовувати сканери на віддалених комп'ютерах" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "Видалити вибране правило" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Отримання доступу до друкарок на віддалених серверах CUPS" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "Вставте дискету в привід %s" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Мальдіви" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "компактний" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 хвилина" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: fat" msgstr "тип: fat" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "на каналі %d id %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr ", багатофункціональний пристрій" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "Лаос" #: ../advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" "Mandrake Linux 9.2 пропонує Вам Центр керування Мандрейк, потужний " "інструмент для повної даптації Вашого комп'ютера. Зконфігуруйте і налаштуйте " "елементи, такі, як рівень безпеки, периферію (екран, мишу, клавіатуру ...), " "з'єднання з інтернетом та багато іншого!" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "Увімкнути/Вимкнути перевірку різнорідності карт ethernet." #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "Немає розділу FAT для зміни розміру (або не залишилося вільного місця)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "Вверх" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "Захисний шлюз" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "Територія:" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "Контролери (E)IDE/ATA" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" "Всі операції вводу/виводу файлової системи повинні виконуватися синхронно." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Сервер друкарки" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "Вибіркове налаштування" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Будь-ласка, вкажіть, де буде доступний образ встановлення.\n" "\n" "Якщо Ви не маєте існуючої теки, скопіюйте вміст CD або DVD.\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Св. П'єр і Мікелон" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "Вересень" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "зберігається тема Bootsplash..." #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Португалія" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Чи Ви маєте інші?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", друк в %s" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "Визначити назву машини з адреси DHCP" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Перемикнути в нормальний режим" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Загальний" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "Від циліндра %d до циліндра %d \n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "ВАШ ТЕКСТ ТУТ" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "Новий профіль..." #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "НІЧОГО" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "На який диск Ви хочете це перемістити?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "Показувати логотип в консолі" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "Домен Windows" #: ../../keyboard.pm:1 #, c-format msgid "Saami (norwegian)" msgstr "Саамі (норвезька)" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "Інтерфейс %s (в мережі %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "ІНФОРМАЦІЯ" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "Валліс і Футунські острови" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Потрібно спочатку створити /etc/dhcpd.conf!" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "Чи є FPU" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Вибачте, немає додаткової \n" "інформації про цей сервіс." #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Не знайдено доступних сканерів у Вашій системі.\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "Зібрати єдиний NIC -->" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Маршалові острови" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Все вірно?" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Пароль користувача root" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "Зібрати всі ядра -->" #: ../../standalone/drakbackup:1 #, c-format msgid "DVDRAM device" msgstr "пристрій DVDRAM" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "якщо встановлено в 'так', повідомляє про файли без власників." #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Ви не маєте розділу swap.\n" "\n" "Все-таки продовжувати? " #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "Версія: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "Немає IP-адреси сервера!" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Сурінам" #: ../../network/adsl.pm:1 #, c-format msgid "Use a floppy" msgstr "Використовувати дискету" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "Увімкнути ACPI" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "Дати доступ для запису звичайним користувачам" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "Графічне середовище" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Ґібралтар" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "Нічого не робити" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "Видалити клієнта" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Тип файлової системи: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "Вмикається мережа..." #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "В'єтнам" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "/Описи полів" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "Оптимізуйте Вашу безпеку, використовуючи Лінакс Мандрейк" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" "\n" "\n" " Подяки:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Довідка" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Перевіряє, чи мережеві пристрої знаходяться в різних режимах" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Ваш особистий номер телефону" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Який розмір Ви хочете залишити для Windows?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Тестова сторінка передана програмі друку.\n" "Перед тим, як друкарка почне друкувати, можливо пройде\n" "деякий час. Чи вона працює коректно?\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "Необхідне ім'я користувача" #: ../../standalone/drakfloppy:1 #, c-format msgid "Device" msgstr "Пристрій: " #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "В залежності від типової мови, яку Ви вказали у Секції, drakX автоматично\n" "вибере певний тип конфігурації клавіатури. Проте, може не існувати\n" "мапи клавіатури, що точно відповідає Вашій мові: наприклад, якщо Ви\n" "англомовний швейцарець, Ви все-одно можете забажати користуватись\n" "швейцарською мапою. Або, якщо Ви говорите англійською, але живете в " "Квебеку,\n" "Ви потрапляєте в аналоґічну ситуацію, коли Ваша рідна мова і мапа " "клавіатури\n" "не співпадають. В таких випадках цей крок встановлення дасть Вам змогу\n" "вибрати відповідну клавіатуру з наданого списку.\n" "\n" "Натисніть кнопку \"%s\", щоб побачити повний список мап клавіатур.\n" "\n" "Якщо Ви вибрали мапу, що основана на нелатинському алфавіті, наступний\n" "діалог дасть змогу вибрати комбінацію клавіш, яка перемикатиме клавіатуру\n" "між латинською і нелатинською мапами." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Параметри друкарки SMB (Windows 9x/NT)" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "URI: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" "Дійсний користувацький список змінено, перезаписується конфігураційний файл." #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "додаткові арґументи для mkinitrd" #: ../advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" "Мандруйте по тенетах з Mozilla або Konqueror, читайте пошту з Evolution або " "Kmail, створюйте документи OpenOffice.org." #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "Протокол для всього іншого світу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "Друкувати тестові сторінки" #: ../../standalone/drakconnect:1 #, c-format msgid "Activate now" msgstr "Активізувати зараз" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 Мб чи більше" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Виберіть, будь ласка, тестові сторінки, які Ви хочете надрукувати.\n" "Зауважте: друк фотографічних тестових сторінок може бути тривалим і\n" "на лазерних друкарках з невеликим об'ємом пам'яті може навіть не\n" "відбутися. У більшості випадків буде достатньо надрукувати\n" "стандартну тестову сторінку." #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "Будь ласка, вкажіть пристрій, до якого під'єднано Ваш %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Не форматований\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "Періодичні перевірки" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "Налаштування сервера PXE" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "Резервувати системні файли перед:" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Це - стандартний рівень безпеки, який рекомендується мати на комп'ютері, " "підключеному до інтернету в якості клієнта." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Перший дисковод" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Файл/Вийти" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Дворака" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Виберіть новий розмір" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "Клас носія" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "Ви повинні перезареєструватися, щоб задіяти зміни" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "Пристрій %s невідомий у цій версії Scannerdrake." #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Фарерські острови" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "Перезапустити XFS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "Додати машину/мережу" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdrake не буде запущено." #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "Назва моделі" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Албанія" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Британська територія в Індійському океані" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "Нормальний режим" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "В приводі немає CDR/DVDR!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "Тип під'єднання друкарки" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "У Вашій системі немає адаптера мережі!" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "Мережа %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "Малайська" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "Параметр %s виходить за рамки дозволених меж!" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "Під'єднати %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "Перезапускається CUPS..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Друк/Сканування/Фотокартки на \"%s\"" #: ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Подвійні точки монтування %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "якщо встановлено в 'так', виконує перевірки chkrootkit." #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Конфігурація з'єднання" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "Невідомий|Загальний" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "Коли Ви встановлююєте Mandrake Linux, деякі пакунки можуть\n" "мати поновлення з часу виходу дистрибутиву. Можуть бути виправлені\n" "помилки, вирішені питання безпеки. Щоб мати користь від цих поновлень,\n" "зараз Ви можете звантажити їх з інтернету. Перевірте \"%s\", якщо маєте\n" "зв'язок з інтернетом, або \"%s\", якщо бажаєте встановити поновлені ракунки\n" "пізніше.\n" "\n" "Вибравши \"%s\", Ви побачите список адрес, звідки можуть бути доставлені\n" "поновлення. Вам потрібно вибрати якісь із найближчих до Вас. Появиться\n" "дерево вибору пакунків: зробіть вибір і натисніть \"%s\", щоб доставити\n" "і встановити їх, або \"%s\", щоб вийти." #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "М'янма" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Вийти" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Автоматично розподілити" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Перевіряти збійні блоки?" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "Інші пристрої мультимедіа" #: ../../standalone/harddrake2:1 #, c-format msgid "burner" msgstr "записувач" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "Опис помилки/Системна інформації" #: ../../standalone/drakbackup:1 #, c-format msgid " (Default is all users)" msgstr " (Типово всі користувачі)" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "Немає віддалених машин" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Ласкаво просимо до Помічника встановлення друкарки\n" "\n" "Цей Помічник допоможе Вам встановити друкарки, під'єднані до цього " "комп'ютера.\n" "\n" "Якщо у Вас є друкарка, під'єднайте її кабель в цей комп'ютер і увімкніть " "його, щоб вона могла бути визначена автоматично.\n" "\n" "Натисніть \"Далі\", коли будете готові, і \"Скасувати\", якщо не хочетезараз " "встановлювати друкарки." #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "NIS автентикація" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Параметр ``Обмежити параметри командного рядка'' не використовується без " "пароля" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Доступ до з'єднання з інтернетом вмикнено" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Об'єднані Арабські Емірати" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "В/В_0 картки" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "Вимкнути локальну конфігурацію" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Таїланд" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "В/В_1 картки" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "Пошук:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Казахстан" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "Маршрутизатори:" #: ../../standalone/drakperm:1 #, c-format msgid "Write" msgstr "Записати" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "Вивести список усіх віддалених друкарок CUPS" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Встановлення Mandrake Linux %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "Невідомий" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Тайська клавіатура" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Острів Буве" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "Параметри зв'язку по модему" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "Якщо порта не вказано, буде взято 631 як типовий." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - Системні конфігураційні файли для кожного клієнта:\n" " \tЗ clusternfs кожний бездисковий клієнт може мати свої власні " "унікальні файли конфігурації\n" " \tв кореневій файловій системі сервера. Дозволяючи локальному " "клієнту налаштування конфігурації, \n" " клієнти можуть налаштовувати файли типу /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard кожен для себе.\n" "\n" " Зауваження: Дозвіл налаштування обладнання для локального клієнта " "робить можливим реєстрацію root на\n" " термінальний сервер на кожній з клієнтских машин, на якій цю " "можливість увімкнено. Локальне налаштування\n" " може бути знову вимкнено із збереженням при цьому конфігураційних " "файлів, як тільки клієнтська машина будет налаштована." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Змініть компакт-диск!\n" "\n" "Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристрій і\n" "натисніть Гаразд після цього.\n" "\n" "Якщо Ви не маєте такого диску, натисніть Скасувати, щоб не\n" "встановлювати з цього диску." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Польська" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Мережа з webdav.\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on a parallel port" msgstr ", багатофункціональний пристрій на паралельному порті" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "У Вашій системі немає сконфіґурованого адаптера мережі ethernet. " "Скористайтесь, будь-ласка, програмою для конфігурації апаратних засобів." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Маска мережі" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "Не знайдено твердих дисків" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "Дві кнопки" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Серія Logitech CC" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "Якого типу з'єднання ISDN Ви маєте?" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Мітка" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Записати на дискету" #: ../../security/l10n.pm:1 #, c-format msgid "Check open ports" msgstr "Перевірити відкриті порти" #: ../../standalone/printerdrake:1 #, c-format msgid "Edit selected printer" msgstr "Редактувати вибрану друкарку" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "Автовизначення друкарок" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Яка з цих є Вашою картою ISDN?" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS - це поширений протокол для спільного доступу до файлів\n" "в мережах TCP/IP. Цей сервіс забезпечує функціональні можливості\n" "сервера NFS, який налаштовується за допомогою файла /etc/exports. " #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "Msec" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Зауважте, мітка змінилася:\n" "%s" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "Кількість буферів захоплення:" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ваш вибір? (0/1, типово %s) " #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "Будь-який з нових створених розділів має бути відформатований, щоб\n" "міг використовуватися (форматування означає створення файлової\n" "системи).\n" "\n" "Зараз Ви, можливо, захочете переформатувати деякі з вже існуючих\n" "розділів для того, щоб стерти дані, які на них записані. Якщо Ви\n" "хочете це зробити, виберіть також розділи, які хочете\n" "відформатувати.\n" "\n" "Зауважте, однак, що не обов'язково форматувати всі розділи, які\n" "існували раніше. Ви повинні відформатувати розділи, які містять\n" "операційну систему (такі, як \"/\", \"/usr\" чи \"/var\"), але не мусите\n" "форматувати ті розділи, які містять дані, які Ви б хотіли зберегти\n" "(типово це розділ \"/home\").\n" "\n" "Будьте уважні з вибором розділів. Після форматування всі дані на\n" "вибраних розділах будуть стерті і їх вже не можна буде відновити.\n" "\n" "Натисніть на \"%s\", коли будете готові приступити до форматування\n" "розділів.\n" "\n" "Натисніть на \"%s\", якщо Ви хочете вибрати інші розділи для\n" "того, щоб встановити нову систему Мандрейк Лінакс.\n" "\n" "Натисніть на \"%s\", якщо Ви хочете вибрати розділи для\n" "перевірки на існування збійних блоків." #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Французька" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Чеська (QWERTY)" #: ../../security/l10n.pm:1 #, c-format msgid "Allow X Window connections" msgstr "Дозволити з'єднання X Window" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "Відбувається визначення пристроїв" #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "Мережевий пристрій" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Загалом" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Паралельні порти: /dev/lpt0, dev/lpt1, ..., відповідають LPT1:, " "LPT2:, ..., 1-а друкарка USB: /dev/usb/lp0, 2-а друкарка USB: /dev/usb/" "lp1, ...)." #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "Далі" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Ви не можете встановити завантажувач в розділ %s\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Пуерто-Ріко" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp/zeroconf)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Ласкаво просимо.\n" "\n" "Параметри автоматичного встановлення доступні в розділах зліва" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "для завершення налаштування потрібний пакунок 'ImageMagick'.\n" "Натисніть \"ОК\" для встановлення 'ImageMagick' або \"Скасувати\" для виходу" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Telnet server" msgstr "X сервер" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Литовська \"цифровий ряд\" QWERTY" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Наступні пакунки будуть вилучені, щоб забезпечити поновлення\n" "Вашої системи: %s\n" "\n" "\n" "Ви справді хочете вилучити ці пакунки?\n" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Ангілья" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "Домен NIS" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Антарктика" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Файли користувача:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Параметри монтування:" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Ямайка" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Поставити пристрої необроблених даних у відповідність до\n" "блокових пристроїв (як, наприклад, розділи твердого диску) для\n" "використання в програмах типу Oracle а програвачі DVD." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Зачекайте, іде підготовка встановлення..." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Чеська (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" "Прослідковувати id плати мережі (може знадобиться при користуванні мобільним " "комп'ютером)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "Номер порта має бути цілим числом!" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "Спочатку Вам потрібно вибрати файл образу!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "Відновити з твердого диску." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Додати до LVM" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "Сервер DNS" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Трінідад і Тобаго" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD та LPRng не підтримують друкарок IPP.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Host name or IP." msgstr "Назва машини або IP." #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "/Виправити" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "простий" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Очистити все" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "Немає тестових сторінок" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Фолклендські острови (Мальвінські)" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "Плата %s: %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Boot disk creation" msgstr "Створення диску завантаження" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "Понеділок" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "Невідома модель" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "якщо встановлено в 'так', перевіряє для всіх права записту у файли/теки." #: ../../help.pm:1 #, c-format msgid "authentication" msgstr "розпізнавання" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "Зарезервувати зараз" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/Файл" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "Видалення друкарки з Star Office/OpenOffice.org/GIMP" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Запускає механізм фільтрування пакунків для ядра Лінакса\n" "серії 2.2, щоб встановити захисний шлюз для захисту від атак\n" "з мережі." #: ../../standalone/drakperm:1 #, c-format msgid "Editable" msgstr "Виправний" #: ../../network/ethernet.pm:1 #, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "Якого клієнта dhcp Ви хочете використовувати? (типово dhcp-client)" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Тамільська (мапа ISCII)" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Майотт" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Встановити розмір історії команд оболонки. Величина -1 означає відсутність " "обмеження." #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d KB\n" msgstr "%d Кб\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Створення дискети для автоматичного встановлення..." #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "Йде пошук сканерів ..." #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "Росія" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "Розбиття на розділи" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "знайдено плату(и) Ethernet " #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "Системний журнал" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "Неможливо створити каталог!" #: ../advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" "Довершіть Вашу безпеку шляхом встановлення легких у використанні програм, " "які поєднують високопотужні компоненти, як захисний шлюз, сервер і клієнт " "віртуальної приватної мережі, систему виявлення атак і менеджер завантаження " "мережі." #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Недостатньо вільного місця для автоматичного розподілу" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Встановити пароль користувача root" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "Увімкнути захист імітації IP" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Для вашої звукової карти (%s) немає безкоштовного драйвера, але є власний " "драйвер на \"%s\"." #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "Група :" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Після зміни розміру розділу %s всі дані на ньому буде втрачено" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "Конфігурація з'єднання з інтернетом" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "Додати name як виняток до керування терміном дії пароля командою msec." #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "USB" msgstr "LSB" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "Пошук каналів ТБ" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "Ядро:" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "/Про..." #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "Бенгальська" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Перевага: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "Сервіси: %d увімкнено із %d зареєстрованих" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Створити аварійну дискету" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Соломонові острови" #: ../../standalone/mousedrake:1 #, c-format msgid "Please test your mouse:" msgstr "Випробуйте мишу, будь-ласка:" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(модуль %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Робоча група" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "Назва друкарки в мережі або IP" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "down" msgstr "виконано" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "Шлях до машини або модуля" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Назва друкарки повинна складатися тільки з літер, цифр та символа " "підкреслення" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "Показати поточну конфігурацію інтерфейса" #: ../../standalone/printerdrake:1 #, c-format msgid "Add Printer" msgstr "Додати друкарку" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Аргумент вказує, чи мають клієнти дозвіл на під'єднання до X сервера\n" "з мережі через порт tcp 6000, чи ні." #: ../../help.pm:1 #, c-format msgid "Development" msgstr "Розробка" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Виконано" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "Веб-сервер" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Чілі" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "\tНе включати системні файли\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Драйвери друкарок inkjet, які надаються Lexmark, підтримують тільки локальні " "друкарки, але не друкарки на віддалених машинах або серверних стойках. Будь-" "ласка, під'єднайте свою друкарку до локального порта або налаштуйте її на " "машині, до якої вона під'єднана." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Ваш багатофункціональний пристрій було автоматично налаштовано для " "сканування. Зараз Ви можете сканувати з допомогою програми \"scanimage" "\" (\"scanimage -d hp:%s\", щоб вкзати сканер, якщо їх більше одного) з " "командного рядка або через графічні інтерфейси \"xscanimage\" или \"xsane\". " "Якщо Ви використовуєте GIMP, також можете сканувати, вибравши відповідну " "команду в меню \"Файл\"/\"Імпорт\". Запустіть також в командному рядку \"man " "scanimage\", щоб отримати додаткову інформацію.\n" "\n" "Не використовуйту \"scannerdrake\" для цього пристрою!" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(вже додано %s)" #: ../../any.pm:1 #, c-format msgid "Bootloader installation in progress" msgstr "Триває встановлення завантажувача" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr ", використовуючи команду %s" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Клавіші Alt і Shift одночасно" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "Прапорці" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "Додати/Вилучити користувачів" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "Відсутня IP-адреса машини/мережі" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "щотижня" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Параметри" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Введена IP-адреса машини/мережі неправильна.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "Створити/Перенести резервні копії ключів для SSH" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "Тут наведено повний список можливих країн" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "Додаткова тестова сторінка (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Якщо Ви маєте всі компакт-диски з поданих вище, натисніть Гаразд.\n" "Якщо Ви не маєте жодного з поданих вище, натисніть Скасувати.\n" "Якщо тільки деяких компакт-дисків не вистачає, відмініть їх вибір і\n" "натисніть Гаразд." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "Зачекайте, будь-ласка" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "Резервувати файли користувача" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Новий" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Це найважливіший крок для безпеки Вашої системи GNU/Linux: Вам\n" "потрібно ввести пароль для користувача Root. Root - це системний\n" "адміністратор і тільки йому дозволено робити поновлення системи,\n" "додавати користувачів, змінювати загальну конфіґурацію системи, таке\n" "інше. Одним словом - Root може все! Ось чому Вам слід вибирати пароль,\n" "який важко вгадати - drakX підкаже Вам, якщо пароль занадто легкий. Як\n" "Ви побачите, пароль вводити необов'язково, але ми настійливо застерігаємо\n" "Вас проти такого. GNU/Linux така ж схильна до помилок оператора, як і\n" "будь-яка інша система. Оскільки Root може обминути всі обмеження і\n" "ненароком стерти всі дані на всіх розділах, неуважно працюючи з ними,\n" "тому повинно бути важко стати користувачем root.\n" "\n" "Пароль має бути сумішшю алфавітно-цифрових символів і бути завдовжки\n" "не менше 8 символів. Ніколи не записуйте пароль -- це зробить занадто\n" "легким отримання несанкціонованого доступу до системи.\n" "\n" "Одне застереження -- не робіть пароль занадто довгим чи складним, тому\n" "що Вам потрібно його запам'ятовувати.\n" "\n" "Коли Ви будете вводити пароль, його не буде видно на екрані. Щоб\n" "зменшити можливість помилки при вводі пароля \"всліпу\", Вам\n" "потрібно буде ввести його двічі. Якщо ж так станеться, що Ви допустите\n" "одну і ту ж помилку двічі, Вам потрібно буде ввести цей \"неправильний\"\n" "пароль при першій реєстрації в системі.\n" "\n" "Якщо Ви хочете дозволити доступ до цього комп'ютера для його контролю\n" "сервером автентикації, натисніть кнопку \"%s\".\n" "\n" "Якщо Ваша мережа використовує служби автентифікації LDAP, NIS або\n" "PDS Windows Domain, виберіть одну з можливостей з \"%s\". Якщо Ви не\n" "знаєте, яку з них використовувати, запитайте в свого системного " "адміністратора.\n" "\n" "Якщо Ви боїтесь, що маєте проблеми із запам'ятовуванням паролів, якщо\n" "Ваш комп'ютер ніколи не буде під'єднано до інтернету, або Ви абсолютно\n" "довіряєте всім, хто використовує Ваш комп'ютер, можете вибрати \"%s\"." #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "Захист від маскарадингу назв" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" "В цьому місці DrakX дасть Вам можливість вибрати рівень безпеки\n" "для Вашої системи. На практиці можна використовувати таке правило:\n" "рівень безпеки повинен бути вищий, якщо на машині зберігатимуться\n" "важливі дані, або якщо вона буде безпосередньо під'єднана до інтернету.\n" "Платою за вищий рівень безпеки у більшості випадків є легкість у\n" "використанні.\n" "\n" "Якщо Ви не знаєте, на чому зупинитись, залиште все, як є." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "Завантажити з дискети" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "Наступні друкарки було визначено автоматично. " #: ../../printer/main.pm:1 #, c-format msgid "Uses command %s" msgstr "Використовуючи команду %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "Дискета для завантаження" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Норвезька" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "Йде пошук нових сканерів ..." #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "Сервер World Wide Web Apache" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "версія процесора (номер (покоління) моделі)" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "вкажіть шлях для відновлення (замість /)" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "Налаштувати рисунок bootsplash" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Грузія" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Китай" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Переконайтеся, що всі Ваші друкарки під'єднані і увімкнені).\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "Йде зчитування даних про встановлені друкарки..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " Витерти зараз " #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "сервер" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Вставте дискету відформатовану у FAT в привід %s" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "'так' означає, що процесор має арифметичного співпроцесора" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Зачекайте, будь ласка... Йде застосування конфіґурації" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "Контролери SCSI" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " на сервері LPD \"%s\", друкарка \"%s\"" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "Вибір менеджера екрану" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "Назва машини zeroconf" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "Вибірковий запис setup/crontab:" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP адреса має бути у форматі 1.2.3.4" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS printing system" msgstr "Налаштувати систему друку CUPS" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Еквадор" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "Додати пункт" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "Друкарки цієї машини доступні на інших машинах" #: ../../lang.pm:1 #, fuzzy, c-format msgid "China (Hong Kong)" msgstr "Гонґ-Конґ" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "Не можу знайти потрібного файлу із зображенням `%s'" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "Звукових карт не виявлено. Спробуйте \"harddrake\" після встановлення" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "Вказано неправильний порт: %s.\n" "Правильний формат - \"порт/tcp\" або \"порт/udp\",\n" "де порт повинен бути між 1 і 65535." #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Командна оболонка" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Сан-Томе і Прінсіпі" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" "Неможливо зареєструватися з іменем користувача %s (неправильний пароль?)" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Азербайджанська (латина)" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "Пакунок не встановлено" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Американське Самоа" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "Станьте експертом Mandrake" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Протокол" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "Копіювати шрифти в систему" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "Довідка HardDrake" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "Bogomips" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Налаштування сервера терміналу Mandrake" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " Детальний звіт DrakBackup\n" "\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "Відновити усі резервні копії" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr " на паралельному порті #%s" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Встановити мінімальну довжину пароля, мінімальну кількість цифр і мінімальну " "кількість великих літер." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "якщо встановлено в 'так', перевіряє відкриті порти." #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "Стирання носія займе певний час." #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Ви не можете вибрати або відмінити вибір цього пакунка." #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Попередження" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Інші файли:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "Назва віддаленої машини" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "доступ до X програм" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "Розраховується розмір розділу Віндовс" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "/Поновити" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "Італія" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Кайманські острови" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "помилка розмонтування %s: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Назва друкарки" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "відімкнути" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "Виконати!" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "%s не відповідає" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "Вибрати модель вручну" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Форматувати" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Найбільш поширений спосіб з'єднання через adsl - це за допомогою\n" "pppoe. Однак, деякі з'єднання користуються тільки pptp, невелика\n" "кількість користується dhcp. Якщо Ви не знаєте напевне, виберіть\n" "\"використовувати pppoe\"." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Різноманітне" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "Zip" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "Ліва клавіша Alt" #: ../../standalone/logdrake:1 #, c-format msgid "Load setting" msgstr "Завантажити налаштування" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake не зміг встановити модель Вашої друкарки %s. Будь-ласка, " "виберіть правильну модель із списку." #: ../../standalone/printerdrake:1 #, c-format msgid "Set selected printer as the default printer" msgstr "Встановити вибрану друкарку типовою" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Позначте друкарки, які Ви хочете перенести, і натисніть\n" "\"Перенести\"." #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "Албанська" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Литва" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Компактний" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "Знайдено модель: %s %s" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "MandrakeSoft вибрав для Вас найкращі програми" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "Локальні файли" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "можливо" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Панама" #: ../../standalone/drakTermServ:1 #, c-format msgid "Can't open %s!" msgstr "Не можу відкрити %s!" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Схоже, Ваша відеокарта має конектор TV-OUT.\n" "Вона може бути налаштована для роботи з використанням буфера кадрів.\n" "\n" "Для цього Ви повинні під'єднати відеокарту до телевізора перед завантаженням " "комп'ютера.\n" "Потім виберіть пункт \"TVout\" в завантажувачі\n" "\n" "У Вас є така можливість?" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Монітор" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Ви збираєтесь налаштувати друк для рахунку Windows з паролем. Внаслідок " "недеробки в архітектурі програми Samba-клієнт, пароль передається відкритим " "текстом в командному рядку Samba-клієнта, який використовується для " "відправлення завдання друку на сервер Windows. Тому кожний користувач цієї " "машини може вивести пароль на екран з допомогою команди типу \"ps auxwww\".\n" "\n" "Ми рекомендуємо використовувати один із наступних варіантів (в будь- якому " "разі Вам необхідно переконатися, що тільки машини із Вашої місцевої мережі " "мають доступ до сервера Windows, наприклад, з допомогою захисного шлюза):\n" "\n" "Використовуйте на своєму сервері Windows рахунок без пароля, наприклад, " "\"ГІСТЬ\", або спеціальний рахунок, призначений для друку. Не знімайте " "захисту паролем з персонального рахунку або з рахунку адміністратора.\n" "\n" "Налаштуйте сервер Windows так, щоб друкарка була доступною по протоколу LPD. " "Потім в Printerdrake налаштуйте друк з цієї машини з типом з'єднання \"%s" "\".\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 тисяч кольорів (16 біт)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Зберегти на твердий диск в теку : %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "Видалення шрифтів з Вашої системи" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Попередження, адаптер мережі (%s) вже налаштовано.\n" "\n" "Хочете його автоматично переналаштувати?\n" "\n" "Ви можете зробити це вручну, але тоді повинні знати, що робите." #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "Графічний інтерфейс при завантаженні" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr " adsl" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Недостатньо розділів для RAID рівня %d\n" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "формати дискет, які підтримуються дисководом" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" "Копіювання програми виробника завершилося невдало, файла %s не знайдено" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: true" msgstr "локальна конфігурація: true" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Сконфіґуровані наступні друкарки. Клацніть двічі на друкарці, щоб змінити її " "налаштування; щоб зробити її поточною; або переглянути інформацію про неї." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "Під'єднано" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Македонська" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Малі" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "Мости і системні контролери" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Файл/Записати" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "Деталей немає" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "дуже гарний" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "Перегляд" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "Віддалене керування" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "Будь-ласка, виберіть носія для резервування..." #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "Помилкова електронна адреса" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "Сервер XFree86: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "Дозволити тонких клієнтів" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Грузинська (російська мапа)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/Параметри" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "Модель Вашої друкарки" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(ПОПЕРЕДЖЕННЯ! Ви використовуєте XFS для кореневого розділу,\n" "створення завантажувальної дискети на 1.44 Mb завершиться невдачею,\n" "тому що для XFS потрібен дуже великий драйвер)." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Видалити tar-файли з твердого диску після резервування.\n" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Не знайдено образів CD або DVD, будь-ласка, скопіюйте програму встановлення " "і файли rpm." #: ../advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Багатоцільовий інстумент налаштування Мандрейк" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "Зберегти" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "Пристрій %s не підтримується" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "Завантажити драйвери для пристроїв usb." #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "Диск" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "Введіть URI пристрою друкарки" #: ../advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" "Успіх MandrakeSoft оснований на принципі Вільного програмного забезпечення. " "Ваша нова операційна система є результатом спільної праці світової спільноти " "Лінакс." #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Ізраїль" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Французька Ґаяна" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "типово:LTR" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "Потрібно ввести командний рядок!" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "Вибрати користувача вручну" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "Перенести налаштування друкарки" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Чи хочете Ви увімкнути друк на друкарках, згаданих вище?\n" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "Перевіряє додатки/переміщувані файлів адміністратора." #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Для того, щоб це запрацювало під W2K PDC, Вам, можливо, потрібно виконати " "під адміністратором: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access" "\" everyone /add і перезавантажити сервер.\n" "Вам також буде потрібно ім'я_користувача/пароль адміністратора домена, щоб " "під'єднати машину до домена Windows(TM).\n" "Якщо мережу ще не увімкнено, DrakX спробує під'єднатися до домена після " "завершення етапу встановлення мережі.\n" "Якщо з якої-небудь причини це встановлення завершилось невдало і " "автентифікація в домені не працює, виконайте 'smbpasswd -j ДОМЕН -U " "КОРИСТУВАЧ%%ПАРОЛЬ', використовуючи домен і ім'я_користувача/пароль своєї " "Windows(tm), після завантаження системи.\n" "Команда 'wbinfo -t' перевірить, наскільки секретна Ваша автентифікація." #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "%s (Порт %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "Використовувати з'єднання з мережею для резервування" #: ../../standalone/drakfloppy:1 #, c-format msgid "Kernel version" msgstr "Версія ядра" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Тепер час вибрати, які програми Ви хочете встановити в своїй\n" "системі. Мандрейк Лінакс має тисячі програмних пакунків, і щоб спростити\n" "керування ними, пакунки розміщено в групи подібних програм. \n" "\n" "Пакунки розсортовано в групи відповідно до способу використання Вашої\n" "машини. Лінакс Мандрейк має чотири попередньо налаштовані типи\n" "встановлення. Ви можете уявити ці типи встановлення як вмістилища\n" "різних пакунків. Ви можете комбінувати і підбирати програми з різних\n" "груп, і встановлення типу ``Робоча станція'' може мати програми із групи\n" "пакунків ``Розробник''.\n" "\n" " * \"%s\": якщо Ви збираєтесь використовувати свою машину як робочу\n" "станцію, виберіть одну чи більше програм з цієї групи.\n" "\n" " * \"%s\": якщо Ви збираєтесь використовувати цю машину для\n" "програмування, виберіть відповідні пакунки з цієї групи, .\n" "\n" " * \"%s\": якщо машина призначається для використання в якості\n" "сервера, виберіть додаткові сервіси, які Ви хочете встановити на своїй\n" "машині.\n" "\n" " * \"%s\": тут Ви можете вибрати графічне середовище собі до вподоби.\n" "Виберіть хоча б одне, якщо Ви хочете мати графічний інтерфейс.\n" "\n" "Пересування курсора над певним пунктом буде висвічувати текст із\n" "коротким поясненням про групу. Якщо Ви забрали вибір усіх груп\n" "під час підготовки звичайного встановлення (на відміну від поновлення),\n" "появиться діалогове вікно з різними параметрами для мінімального\n" "встановлення:\n" "\n" " * \"%s\":встановити найменшу можливу кількість пакунків, щоб мати\n" "працюючу графічну стільницю.\n" "\n" " * \"%s\": встановлює основну систему плюс основні інструменти і їх\n" "документацію. Цей спосіб використовується для встановлення сервера.\n" "\n" " * \"%s\": встановить абсолютно найменшу кількість пакунків, необхідних,\n" "щоб отримати працюючу систему Лінакс. При цьому встановленні Ви\n" "будете мати тільки інтерфейс командного рядка. Загальний розмір цього\n" "встановлення становить біля 65 мегабайтів.\n" "\n" "Ви можете вибрати \"%s\", якщо впевнено орієнтуєтесь у пакунках,\n" "які вам пропонуються, або якщо Ви хочете мати повний контроль над\n" "тим, що встановлюється в системі.\n" "\n" "Якщо Ви почали установку в режимі \"%s\", Ви можете відмінити\n" "вибір всіх груп, щоб уникнути встановлення нових пакунків. Це\n" "використовується при відновленні або поновленні існуючої системи." #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Прийняти користувача" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Сервер" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "Ліва клавіша Shift" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr " місцева мережа" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Невдалий вибір, спробуйте ще раз\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "Системний журнал генерує звіт на консоль 12" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search new servers" msgstr "Шукати нові сервери" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "Хердські і МакДональдські острови" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "Немає альтернативного драйвера" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Перемикнути в режим експерта" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(на цій машині)" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Адреса шлюза має бути у форматі 1.2.3.4" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" "Виявлено \"%s\"-сумісний win-модем, хочете встановити відповідні програми?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "Переглядається список вже встановлених пакунків..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "Використовувати різницеві резервування" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Драйвер" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf буде деколи організовувати виконання різних задач\n" "під час завантаження для підтримання конфігурації системи в\n" "робочому стані." #: ../../standalone/drakbackup:1 #, c-format msgid "DVD-R device" msgstr "пристрій DVDR" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "Друкарка на віддаленому сервері lpd" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Перед встановленням будь-яких шрифтів переконайтеся, що Ви маєте права на їх " "використання і встановлення у Вашу систему.\n" "\n" "-Ви можете встановити шрифти звичайним способом. В рідких випадках " "відсутність шрифтів може призвести до зависання Х-сервера." #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot - це завантажувач системи для Макінтошів NewWorld і може\n" "використовуватися для завантаження GNU/Linux, MacOS або MacOSX.\n" "Переважно MacOS і MacOSX вірно визначаються і встановлюються в\n" "меню завантажувача. Якщо це не так, Ви можете додати відповідний пункт\n" "вручну на цьому екрані. Будьте уважні при виборі коректних\n" "параметрів. \n" "\n" "Основні параметри Yaboot:\n" "\n" " * Повідомлення при завантаженні: просте текстове повідомлення, яке\n" "появляється перед завантаженням.\n" "\n" " * Пристрій завантаження: вказує на те, де саме записується\n" "інформація, потрібна для завантаження GNU/Linux. В загальному\n" "випадку Ви вже встановили розділ завантаження раніше, щоб зберігати цю\n" "інформацію. \n" "\n" " * Затримка Open Firmware: на відміну від Lilo, тут є два різних\n" "періоди затримки в Yaboot. Перший період затримки вимірюється в\n" "секундах. Під час цього періоду затримки Ви можете вибрати, звідки\n" "завантажуватися: з компакт-диску, OF, MacOS чи Лінакс.\n" "\n" " * Період затримки перед завантаженням ядра: цей період подібний до\n" "затримки Lilo. Після вибору Лінакса, затримка обчислюється в десятих\n" "секунди перш, ніж почне завантажуватися стандартне ядро.\n" "\n" " * Дозволити завантаження з компакт-диску?: якщо цей параметр\n" "вибрано, Ви можете натиснути 'C' при завантаженні під час першого\n" "періоду затримки.\n" "\n" " * Дозволити завантаження OF: якщо Ви виберете цей параметр,\n" "зможете натиснути 'N' під час першого періоду затримки для\n" "завантаження з Open Firmware.\n" "\n" " * Стандартна ОС: цим Ви можете встановити стандартну систему, яка\n" "завантажиться після того, як закінчиться затримка Open Firmware." #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "Середа" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Німеччина" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Австрія" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Немає миші" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "Виберіть розмір Вашого носія CD/DVD (Мб)" #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "Перевірити права доступу файлів у домівці користувача" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "Виконайте \"sndconfig\" після встановлення, щоб налаштувати звукову карту" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Згорнути дерево" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "Конфіґуратор автоматичного встановлення" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Налаштувати мережу" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Де Ви хочете встановити завантажувач?" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "Ваш вибір мови вплине на мову документації, програми встановлення\n" "і систему в цілому. Спочатку виберіть регіон, в якому Ви знаходитесь,\n" "потім мову, якою Ви розмовляєте.\n" "\n" "Натиснувши кнопку \"%s\" Ви зможете вибрати інші мови, які можна\n" "встановити на Вашій робочій станції, при цьому встановлюються особливі\n" "для мови файли системної документації і програми. Наприклад, якщо\n" "в системі будуть працювати користувачі з Іспанії, виберіть англійську\n" "мову типовою з дерева перегляду і \"%s\" в розділі Додатково.\n" "\n" "Зауважте, що Ви не обмежені вибором однієї додаткової мови. Ви можете\n" "вибрати їх кілька або встановити їх всі, вибравши пункт \"%s\". Вибір\n" "підтримки мови означає вибір перекладів, шрифтів, перевірку орфографії\n" "і т.д. Крім того, пункт \"%s\" заставить систему використовувати Юнікод\n" "(UTF-8). Але майте на увазі, що це експериментальна можливість. Якщо\n" "Ви виберете мови, які потребують іншого кодування, підтримку Юнікоду\n" "буде встановлено обов'язково.\n" "\n" "Для перемикання між різними мовами, встановленими в системі, можете\n" "виконати команду \"/usr/sbin/localedrake\" з правами \"root\", щоб змінити\n" "мову для всієї системи. Виконання цієї команди від звичайного користувача\n" "змінить мову тільки для даного конкретного користувача." #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "%s не підтримується цією версією Лінакс Мандрейк." #: ../../standalone/drakbackup:1 #, c-format msgid "tape" msgstr "плівка" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "клієнт DHCP" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "Показувати список користувачів в менеджерех дисплею (kdm і gdm)." #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Миша Logitech (послідовна, старий тип C7)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Відновлення з файлу %s не спрацювало: %s" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Не можу прочитати таблицю розділів на пристрої %s, вона занадто\n" "зіпсована для мене :( Я спробую стерти зіпсовані розділи і ВСІ ДАНІ\n" "будуть втрачені). Проблемі можна також запобігти, якщо заборонити DrakX\n" "змінювати таблицю розділів. (помилка: %s)\n" "\n" "Ви погоджуєтесь втратити всі розділи?\n" #: ../../standalone/drakbug:1 #, c-format msgid "Find Package" msgstr "Знайти пакунок" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Ви впевнені, що хочете налаштувати друк на цій машині?\n" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "Новий пристрій devfs" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "ПОМИЛКА: Неможливо створити підпроцес %s." #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Налаштування стилю завантаження" #: ../../help.pm:1 #, c-format msgid "Automatic time synchronization" msgstr "Автоматична синхронізація часу" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "Резервних файлів в %s не знайдено." #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Вірменська (фонетична)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "Модель карти:" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "Тонкий клієнт" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "Дякуємо за Ваш вибір Mandrake Linux 9.2" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "Увімкнути сервера" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Туркменістан" #: ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "Всі віддалені машини" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "Встановити теми" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "Іспанська" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Підготовка встановлення" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "Змінити вибрану машину/мережу" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "Додати користувача -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Науру" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "Встановлення шрифтів True Type" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" "Автоматично виявити друкарки, під'єднані безпосередньо до місцевої мережі" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "Конфіґурація мережі" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "модель твердого диску" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" " - Формування /etc/exports:\n" " \t\tClusternfs дає змогу експортувати кореневу файлову систему до " "бездискових клієнтів. drakTermServ\n" " \t\tвстановлює правильні параметри, щоб дозволити анонімний доступ " "до кореневої файлової системи з \n" " \t\tбездискового клієнта.\n" "\n" " \t\tТипові параметри експорту для clusternfs такі:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t\t/home ПІДМЕРЕЖА/МАСКА(rw,root_squash)\n" "\t\t\t\n" "\t\t\tЗ ПІДМЕРЕЖЕЮ/МАСКОЮ, створеними для Вашої мережі." #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Для точки монтування %s не можна користуватися логічним томом LVM" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "Отримати шрифти Windows" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Іранська" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Хорватія" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Шлюз:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "Додати сервера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "Назва віддаленої друкарки" #: ../advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" "MandrakeSoft розробив власні інструменти для створення найбільш захищеної " "версії Лінакса: Draksec, інструмент для керування безпекою, і потужний " "захисний шлюз відтепер працюють одною командою для ще більшого зменшення " "ризику вторгнення в систему." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Пристрій: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Ліцензійна угода" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "Параметри системи" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "Будь-ласка, виберіть бажаний рівень захисту" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "Ця машина вже є в списку, її не можна додати знову.\n" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr ", друкарка USB" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Не можу коректно завершити mkbootdisk: \n" "\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Наростаючі резервування зберігають тільки файли, які змінилися, або є новими " "з часу створення попереднього резервування." #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Виберіть програми, які будуть підтримувати шрифти:" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "Налаштувати X" #: ../../standalone/drakbackup:1 #, c-format msgid "hd" msgstr "hd" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Турецька (традиційна \"F\" модель)" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Вітання!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "Використовувати id власника для виконання" #: ../../security/l10n.pm:1 #, c-format msgid "Allow remote root login" msgstr "Дозволити реєстрацію віддаленого користувача root" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "Вниз" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "Друкарка необроблених даних (немає драйвера)" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "Встановити rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Щоб друкувати файл з командного рядка (вікна терминала), Ви можете " "використати команду \"%s <файл>\", або графічну сервісну програму: \"xpp " "<файл>\", або \"kprinter <файл>\". Графічні сервісні програми дають " "можливість вибрати друкарку і легко змінити параметри.\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Залишок часу " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "Британська клавіатура" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Розмонтувати" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "Видалити шрифти" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Зачекайте, будь-ласка, встановюється рівень безпеки..." #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Німецька (без мертвих клавіш)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "\tВідіслати пошту на %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "Переношу %s ..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 тисячі кольорів (15 біт)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "Ви можете експортувати за допомогою NFS або Samba. Будь-ласка, виберіть, чим " "Ви б хотіли скористатися." #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Ґамбія" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "Центр керування Мандрейк" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../../move/move.pm:1 #, c-format msgid "Reboot" msgstr "Перезавантажити" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "Багатофункціональний пристрій" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "Ви можете ввести різні порти.\n" "Правильні приклади: 139/tcp 139/udp.\n" "Інформацію можна знайти в /etc/services." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "\t-Плівку \n" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "У Вашій системі не встановлено жодного переглядача. Будь-ласка, встановіть " "його, якщо хочете користуватися довідкою" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "Запам'ятати цей пароль" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Доступ до користування з'єднанням з інтернетом увімкнено" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Мережа з SSH.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "Якщо потрібну друкарку було виявлено автоматично, просто виберіть її із " "списку, а потім додайте, якщо необхідно, ім'я користувача, пароль і/або " "робочу групу." #: ../../network/netconnect.pm:1 #, c-format msgid " cable" msgstr " кабельне" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Використовувати вільний простір на розділі Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "Знайдено %s на %s, налаштувати автоматично?" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 драйвер: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "Ця машина/мережа вже є в списку, її не можна додати знову.\n" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Виберіть пакунки, які Ви хочете встановити" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Папуа Нова Гвінея" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on a parallel port" msgstr "Багатофункціональний пристрій на паралельному порті" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Busy files" msgstr "Резервувати системні файли" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "Сербська (кирилиця)" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory where backups are stored" msgstr "Введіть теку, де зберігаються резервні копії" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "Зробити повідомлення ядра невидимими типово" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Ви хочете зробити цю друкарку (\"%s\")\n" "типовою?" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "Кінцевий діапазон DHCP" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Створюється дискета для завантаження..." #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "Зачекайте, будь ласка. Йде випробування з'єднання..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Вимикаю мережу" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "ID користувача" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS - це популярний протокол для спільного використання файлів на\n" "комп'ютерах, з'єднаних мережею TCP/IP. Цей сервіс забезпечує\n" "можливість блокування файлів NFS." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "Клієнт DHCP" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Це HardDrake, інструмент налаштування заліза від .\n" "Версія: %s\n" "Автор: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "відмінити" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Друк/Сканування на \"%s\"" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "пропускати модулі raid" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd - це служба друку, яка забезпечує роботу lpr. Фактично, вона є\n" "сервером, який надсилає завдання на друкарку." #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "Ірландська" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "Неділя" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "Конфігурація з'єднання з інтернетом" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "розділені комою числа" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Після того, як Ви вибрали пристрій, Ви зможете побачити інформацію про нього " "в полях, що відображаються у правому вікні (\"Інформація\")" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "Перемістити вибране правило на один рівень уверх" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Наступний сканер\n" "\n" "%s\n" "доступний у Вашій системі.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Ви справді хочете видалити друкарку \"%s\"?" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "Не можу знайти вільного місця для встановлення" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "Стандартна друкарка" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Ви налаштували кілька способів з'єднання з тенетами.\n" "Виберіть один із них, яким Ви будете користуватись.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Змінити RAID" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Знайдена ISDN PCI плата, але невідомого типу. Виберіть, будь-ласка, одну з " "плат PCI на наступному екрані." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Додати користувача" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "Диски RAID %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Ліберія" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Неможливо встановити пакунки, необхідні для встановлення сканерів з " "допомогою Scannerdrake." #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Будь-ласка, введіть назву інтерфейсу, під'єднаного до інтернету.\n" "\n" "Приклади:\n" "\t\tppp+ для модемних або DSL з'єднань, \n" "\t\teth0 або eth1 для кабельного з'єднання, \n" "\t\tippp+ для isdn з'єднання.\n" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Виберіть тип клавіатури" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Форматувати розділи" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Автоматичне виправлення конфіґурації CUPS" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "Виконується \"%s\" ..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "увімкнути підтримку радіо" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "Сканер є доступним для машин: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Назви файлів зворотнього монтування: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Будь-ласка, вкажіть друкарку, на яку повинні відправлятися завдання." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "Не переносити друкарки" #: ../../help.pm:1 #, c-format msgid "Delay before booting the default image" msgstr "Пауза перед завантаженням типового образу" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "Використовувати твердий диск для резервування" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 #, c-format msgid "Configure" msgstr "Налаштувати" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Попередження, виявлено інше під'єднання до Інтернету, яке, можливо, " "використовує Вашу мережу" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "Резервувати користувачів" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Введіть, будь-ласка, назву Вашої машини.\n" "Назва машини повинна бути повністю кваліфікованою, наприклад,\n" "``mybox.mylab.myco.com''.\n" "Ви також можете ввести IP-адресу шлюза, якщо такого маєте." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "Виберіть чергу друку для друкарки" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "Створити нову тему" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "Пояснення інструментів Мандрейк" #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "Образу не знайдено" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Деякі важливі пакунки не вдалося вірно встановити. Ваш\n" "компакт-диск або привід дефектні. Перевірте компакт-диск\n" "командою \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "Mandrake Linux 9.2: найкраща платформа для розробки" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "Знайдено модель: %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "\"%s\" не є діючою електронною адресою!" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "Менеджер екрану X11 надає графічне середовище для реєстрації\n" "в системі з X Window і дає змогу виконувати одночасно декілька\n" "сеансів X на Вашій локальній машині." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "якщо встановлено в 'так', виконує щоденні перевірки безпеки." #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Азербайджан" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "Назва пристрою для створення резервної копії" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "Немає плівки в %s!" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" " --doc - посилання на іншу сторінку web ( для інтерфейсу " "привітання WM)\n" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Дворака (США)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "це фізична шина, до якої приєднано пристрій (напр: PCI, USB, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Як під'єднано друкарку?" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "Рівень безпеки" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "кінцева роздільна здатність" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "Сервіси" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Auto configuration" msgstr "Вибіркове налаштування" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 Мб" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Офісна робоча станція" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Програми для офісу: текстові процесори (kword, abiword), бухгалтерські\n" "таблиці (kspread, gnumeric), переглядачі файлів pdf, тощо" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Ігрова станція" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Програми для розваг: ігри-перегони, ігри на дошці, стратегічні, тощо" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Мультимедійна станція" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Звукові та відео програвачі та редактори" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Станція для інтернету" #: ../../share/compssUsers:999 #, fuzzy msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Набір засобів для читання та передавання електронної пошти та груп\n" "новин (pine, mutt, tin..), та для перегляду інформаційних тенет" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Мережевий Комп'ютер (клієнт)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Клієнти для різних протоколів (ssh включно)" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Конфіґурація" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Засоби для полегшення конфіґурування Вашого комп'ютера" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Наукова робоча станція" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "Наукові програми, як gnuplot" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Засоби для консолі" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Редактори, командні оболонки, файлові засоби та термінали" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "Робоча станція KDE" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "Робоче середовище K (KDE) - основне графічне середовище з набором\n" "допоміжних засобів" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Робоча станція Gnome" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Графічне середовище з дружнім інтерфейсом та програмами, засоби для\n" "стільниці" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Інші робочі середовища" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, тощо" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Бібліотеки для програмування в C, C++, програми та файли include" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Документація" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Книжки та HOWTO про Лінакс та вільне програмне забезпечення" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Стандартна база Лінакс. Підтримка програм сторонніх виробників" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Тенета/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "Пошта" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "Поштовий сервер postfix" #: ../../share/compssUsers:999 msgid "Database" msgstr "База даних" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "Сервери баз даних PostgreSQL або MySQL " #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Захисний шлюз/Маршрутизатор" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Інтернет-шлюз" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Сервер імен та мережевий інформаційний сервер (DNS, NIS)" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Мережевий комп'ютер (сервер)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Сервер NFS, сервер SMB, проксі-сервер, сервер ssh" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Набір засобів для читання та передавання електронної пошти та новин,\n" "а також для перегляду тенет" #~ msgid "The setup has already been done, and it's currently enabled." #~ msgstr "Встановлення вже зроблене і в даний момент дозволене." #~ msgid "Logs" #~ msgstr "Журнал" #~ msgid "The setup has already been done, but it's currently disabled." #~ msgstr "" #~ "Встановлення доступу до з'єднанням з інтернетом вже зроблена,\n" #~ "але на даний момент його відключено." #~ msgid "Profile " #~ msgstr "Профіль " #~ msgid "" #~ "Welcome to the Internet Connection Sharing utility!\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Click on Configure to launch the setup wizard." #~ msgstr "" #~ "Ласкаво просимо до програми налаштування доступу до користування\n" #~ "з'єднання з інтернетом\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Клацніть на \"Налаштувати\", щоб запустити конфіґуратор." #~ msgid "Internet Connection Sharing configuration" #~ msgstr "Конфігурація спільного використання інтернету." #~ msgid "No Internet Connection Sharing has ever been configured." #~ msgstr "Доступ до користування з'єднанням з інтернетом не сконфігуровано" #~ msgid "when checked, owner and group won't be changed" #~ msgstr "коли вибрано, власник і група не можуть бути змінені" #~ msgid "" #~ "XawTV isn't installed!\n" #~ "\n" #~ "\n" #~ "If you do have a TV card but DrakX has neither detected it (no bttv nor " #~ "saa7134\n" #~ "module in \"/etc/modules\") nor installed xawtv, please send the\n" #~ "results of \"lspcidrake -v -f\" to \"install@mandrakesoft.com\"\n" #~ "with subject \"undetected TV card\".\n" #~ "\n" #~ "\n" #~ "You can install it by typing \"urpmi xawtv\" as root, in a console." #~ msgstr "" #~ "XawTV не встановлено!\n" #~ "\n" #~ "\n" #~ "Якщо у Вас є TV-карта, але DrakX не визначив її (немає ні модуля bttv, ні " #~ "saa7134\n" #~ "в \"/etc/modules\") і не встановив xawtv, будь-ласка, пошліть\n" #~ "результат команди \"lspcidrake -v -f\" за адресою \"install@mandrakesoft." #~ "com\"\n" #~ "з темою \"undetected TV card\".\n" #~ "\n" #~ "\n" #~ "Ви можете встановити її, ввівши в консолі від імені root команду\"urpmi " #~ "xawtv\" ." #~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #~ msgid "Error while parsing \"MODULES\" line from %s" #~ msgstr "Помилка при проходженні рядка \"MODULES\" з %s" #~ msgid "Hostname configuration" #~ msgstr "Налаштування назви машини" #~ msgid "Hostname" #~ msgstr "Назва машини" #~ msgid "Remote Printers" #~ msgstr "Віддалені друкарки" #~ msgid "Printing system: " #~ msgstr "Система друку: " #~ msgid "Firmware copy succeed" #~ msgstr "Копіювання програми виробника завершилося успішно" #~ msgid "Level 1" #~ msgstr "Рівень 1" #~ msgid "Level 2" #~ msgstr "Рівень 2" #~ msgid "Level 3" #~ msgstr "Рівень 3" #~ msgid "Level 4" #~ msgstr "Рівень 4" #~ msgid "Level 5" #~ msgstr "Рівень 5"