# Ukrainian translation of drakbootdisk # Copyright (C) 2000 Free Software Foundation, Inc. # Dmytro Kovalov , 2000 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2003-03-24 22:30+0100\n" "PO-Revision-Date: 2001-08-30 13:19+09:00\n" "Last-Translator: Dmytro Kovalov \n" "Language-Team: Ukrainian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=koi8-u\n" "Content-Transfer-Encoding: 8bit\n" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../any.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 #: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #: ../../standalone/drakfont:1 ../../standalone/drakgw:1 #: ../../standalone/draksec:1 ../../standalone/logdrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "В╕дм╕нити" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Як╕ пакети Ви хочете встановити?" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Спец╕альний" #: ../../any.pm:1 #, fuzzy, c-format msgid "Allow all users" msgstr "Додати користувача" #: ../../any.pm:1 #, fuzzy, c-format msgid "No sharing" msgstr "Старту╓ CUPS" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Ще" #: ../../any.pm:1 #, fuzzy, c-format msgid "Here is the full list of available countries" msgstr "Тут наведено повний список наявних клав╕атур" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose your country." msgstr "Який тип миш╕ ви ма╓те?" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid " / Region" msgstr "Рен╕он" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Country" msgstr "Кра╖на:" #: ../../any.pm:1 #, fuzzy, c-format msgid "All languages" msgstr "Вибер╕ть мову" #: ../../any.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" "установки" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose a language to use." msgstr "Вибер╕ть, будь-ласка, мову." #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Вибер╕ть менеджер в╕кон, яким ви хочете користуватися" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Вибер╕ть стандартного користувача:" #: ../../any.pm:1 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "Чи Ви хочете використовувати aboot?" #: ../../any.pm:1 #, fuzzy, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" "п╕сля завантаження системи.\n" "Чи ви бажа╓те скористуватися ц╕╓ю можлив╕стю?" #: ../../any.pm:1 #, c-format msgid "Autologin" msgstr "Авторе╓страц╕я" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "П╕ктограма" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Командна оболонка" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Пароль (ще раз)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Пароль" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "╤м'я користувача" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Повне ╕м'я" #: ../../any.pm:1 #, c-format msgid "Accept user" msgstr "Прийняти користувача" #: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Зак╕нчено" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Введ╕ть користувача\n" "%s" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Додати користувача" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Це ╕м'я вже зайняте" #: ../../any.pm:1 #, fuzzy, c-format msgid "The user name is too long" msgstr "Це ╕м'я вже зайняте" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "╤м'я користувача повинно складатися т╕льки з малих латинських л╕тер,\n" "чисел, `-' та `_'" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Дайте, будь-ласка, ╕м'я користувача" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Пароль занадто простий" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Будь-ласка, спробуйте ще раз" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Парол╕ р╕зн╕" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(вже створений %s)" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Тут наведен╕ р╕зноман╕тн╕ пункти.\n" "ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "╤нш╕ системи (windows...)" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "╤нш╕ системи (MacOS...)" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "╤нш╕ системи (SunOS...)" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Л╕накс" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Який тип ви хочете додати?" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Ця етикетка вже використову╓ться" #: ../../any.pm:1 #, fuzzy, c-format msgid "You must specify a root partition" msgstr "Ви повинн╕ мати п╕дрозд╕л для своп " #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Не дозволяються пуст╕ етикетки" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Default" msgstr "Основна" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "БезВ╕део" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Розм╕р Initrd" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "При╓днати" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Етикетка" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Небезпечно" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Таблиця" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Root" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Запис/читання" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "В╕део режим" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Образ" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Основна система?" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "Дозволити завантаження OF?" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "Дозволити завантаження з компакт-диску?" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Затримка при завантаженн╕ ядра" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Затримка Open Firmware" #: ../../any.pm:1 #, c-format msgid "Boot device" msgstr "Пристр╕й завантаження" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "Пов╕домлення при завантаженн╕" #: ../../any.pm:1 #, c-format msgid "Bootloader to use" msgstr "Використовувати завантажувач" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Основн╕ опц╕╖ завантажувача" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Опц╕я ``Обмежити опц╕╖ командного рядка'' не ма╓ сенсу без пароля" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Давати розм╕р пам'ят╕ в Мб" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Дозволити багатопроф╕льн╕сть" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Точний об'╓м пам'ят╕ (RAM). Знайдено %d Мб" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Очищати /tmp при кожному перевантаженн╕" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Створити авар╕йну дискету" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "обмежити" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Обмежити опц╕╖ командного рядка" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Enable ACPI" msgstr "Дозволити завантаження з компакт-диску?" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Пауза перед завантаженням основно╖ системи" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "компактний" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Компактний" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Установка завантажувача" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Перший сектор диску (MBR)" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Де ви хочете встановити стартовий блок?" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Установка LILO/grub" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Установка SILO" #: ../../any.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Пропустити" #: ../../any.pm:1 #, fuzzy, c-format msgid "On Floppy" msgstr "Записати на дискету" #: ../../any.pm:1 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "Перший сектор системного п╕дрозд╕лу (boot partition)" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Створюю дискету для завантаження" #: ../../any.pm:1 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "Вставте дискету в дисков╕д %s" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Вибер╕ть прив╕д дискети, який Ви хочете використовувати для створення\n" "авар╕йно╖ дискети" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Другий прив╕д дискети" #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Перша дискета" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Перепрошую, нема╓ приводу дискети" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" "запуску системи незалежно в╕д звичайного завантажувача. Це може\n" "знадобитися у тих випадках, коли Ви не бажа╓те встановлювати LILO (або\n" "grub) в сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\"\n" "LILO, або коли LILO не працю╓ з новою конф╕гурац╕╓ю апаратних\n" "засоб╕в. Авар╕йний диск може також використовуватися разом з Mandrake\n" "авар╕йним диском, що робить в╕дновлення в╕д серйозних системних крах╕в\n" "набагато прост╕шим. Чи бажа╓те Ви створити авар╕йний диск для сво╓╖\n" "системи?\n" "%s" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Спец╕ально створений диск для завантаження забезпечить Вам можлив╕сть\n" "запуску системи незалежно в╕д звичайного завантажувача. Це може\n" "знадобитися у тих випадках, коли Ви не бажа╓те встановлювати SILO в\n" "сво╖й систем╕, або коли ╕нша операц╕йна система \"перетира╓\" SILO, або\n" "коли SILO не працю╓ з новою конф╕гурац╕╓ю апаратних засоб╕в. Авар╕йний\n" "диск може також використовуватися разом з Mandrake авар╕йним диском,\n" "що робить в╕дновлення в╕д серйозних системних крах╕в набагато\n" "прост╕шим. \n" "\n" "Якщо Ви бажа╓те створити авар╕йний диск для сво╓╖ системи вставте\n" "дискету в перший дисков╕д ╕ натисн╕ть \"Гаразд\"." #: ../../bootloader.pm:1 #, fuzzy, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Де ви хочете встановити стартовий блок?" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "недостатньо м╕сця в /boot" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" "komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" "Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is then suggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaoot" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../bootloader.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO з текстовим меню" #: ../../bootloader.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO з граф╕чним меню" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Laskavo prosymo do %s - peremykacha operaciynih system!\n" "\n" "Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n" "poki pochne vantazhytysja persha z inh.\n" "\n" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "нема╓ kdesu" #: ../../common.pm:1 #, fuzzy, c-format msgid "Screenshots will be available after install in %s" msgstr "" "Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" "установки" #: ../../common.pm:1 #, fuzzy, c-format msgid "Can't make screenshots before partitioning" msgstr "Не можу додати жодного п╕дрозд╕лу" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d секунд" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 хвилина" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d хвилин" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "Тб" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "╫б" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "Мб" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "кб" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Сполучен╕ штати" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Austria" msgstr "посл╕довний" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Italy" msgstr "╤тал╕йська" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Голанд╕я" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Sweden" msgstr "Дивись" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Norway" msgstr "Норвезька" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Greece" msgstr "Грецька" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Н╕меччина" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Чешська республ╕ка" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "Belgium" msgstr "Бельг╕йська" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Франц╕я" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Коста-Р╕ка" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Не можу в╕дкрити %s на запис: %s" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Недостатньо в╕льного простору для автоматичного под╕лу" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Для ц╕╓╖ точки монтування Вам потр╕бна справжня файлова система (ext2,\n" "reiserfs)\n" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Цей каталог ма╓ знаходитись на коренев╕й файлов╕й систем╕" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Для точки монтування %s не можна користуватися лог╕чним томом LVM" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "В якост╕ п╕дрозд╕ла для root (/) ви вибрали програмний RAID.\n" "Завантажувач╕ не мжоуть працювати з такими п╕дрозд╕лами без п╕дрозд╕лу\n" "/boot. Тож, будь-ласка, не забудьте додати п╕дрозд╕л /boot." #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Вже ╓ п╕дрозд╕л з точкою монтування %s\n" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" "Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Точка монтування повинна починатися з /" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 32Мб." #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS не можна користуватися на п╕дрозд╕лах розм╕ром менше 16Мб." #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Не можу прочитати таблицю п╕дрозд╕л╕в, вона занадто з╕псована для мене\n" ":( Я спробую стерти з╕псован╕ п╕дрозд╕ли ╕ ВС╤ ДАН╤ будуть\n" "втрачен╕. Проблем╕ можна також запоб╕гти, якщо заборонити DrakX\n" "зм╕нювати таблицю п╕дрозд╕л╕в. (помилка: %s)\n" "\n" "Ви погоджу╓тесь втратити вс╕ п╕дрозд╕ли?\n" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "Помилка" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "сервер" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "простий" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "Форматування п╕дрозд╕лу %s" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "помилка розмонтування %s: %s" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "Форматування п╕дрозд╕лу %s" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Checking %s" msgstr "Видалення LPD..." #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Форматування п╕дрозд╕лу %s" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "Створюю та форматую файл %s" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Не знаю як форматувати %s типу %s" #: ../../fs.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s форматування %s втрачено" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Click on \"Next ->\" if you want to delete all data and partitions present\n" "on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n" "be able to recover any data and partitions present on this hard drive,\n" "including any Windows data.\n" "\n" "Click on \"<- Previous\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Клацн╕ть на кнопц╕ \"Гаразд\", якщо ви хочете стерти вс╕ дан╕ та\n" "п╕дрозд╕ли на цьому жорсткому диску. Будьте уважн╕: п╕сля того, як Ви\n" "натиснете на \"Гаразд\" ви не зможете в╕дновити жодн╕ дан╕ чи\n" "п╕дрозд╕ли, як╕ маються на цьому диску, включаючи також ╕ дан╕\n" "В╕ндовс.\n" "\n" "Якщо Ви вир╕шили в╕дм╕нити цю операц╕ю, натисн╕ть клав╕шу\n" "В╕дм╕нити. П╕дрозд╕ли ╕ дан╕ на диску залишаться без зм╕н." #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Вибер╕ть жорсткий диск, який ви хочете переформатувати щоб встановити\n" "новий п╕дрозд╕л для Мандрейк Л╕накса. Будьте уважн╕, оск╕льки вс╕ дан╕\n" "будуть знищен╕, ╕ в╕дновити ╖х буде неможливо!" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of various information it has\n" "about your system. Depending on your installed hardware, you may have some\n" "or all of the following entries. Each entry is made up of the configuration\n" "item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"Configure\" button to change\n" "that.\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and change\n" "that if necessary.\n" "\n" " * \"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list.\n" "\n" " * \"Timezone\": By default, DrakX deduces your time zone based on the\n" "country you have chosen. You can click on the \"Configure\" button here if\n" "this is not correct.\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. If you notice the sound card displayed is not the one that\n" "is actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"Graphical Interface\": by default, DrakX configures your graphical\n" "interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n" "you, click on \"Configure\" to reconfigure your graphical interface.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. If you have a TV card and it is not detected, click on \"Configure\"\n" "to try to configure it manually.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on \"Configure\" to change the parameters\n" "associated with the card.\n" "\n" " * \"Network\": If you want to configure your Internet or local network\n" "access now.\n" "\n" " * \"Security Level\": this entry offers you to redefine the security level\n" "as set in a previous step ().\n" "\n" " * \"Firewall\": if you plan to connect your machine to the Internet, it's\n" "a good idea to protect you from intrusions by setting up a firewall.\n" "Consult the corresponding section of the ``Starter Guide'' for details\n" "about firewall settings.\n" "\n" " * \"Bootloader\": if you wish to change your bootloader configuration,\n" "click that button. This should be reserved to advanced users.\n" "\n" " * \"Services\": you'll be able here to control finely which services will\n" "be run on your machine. If you plan to use this machine as a server it's a\n" "good idea to review this setup." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Sound card\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot - це завантажувач системи для Мак╕нтош╕в Нового типу. В╕н може\n" "завантажувати будь-яку ╕з систем: GNU/Linux, MacOS, MacOSX, якщо в╕н\n" "встановлений в систем╕. В б╕льшост╕ випадк╕в ц╕ системи в╕рно\n" "визначаються ╕ встановлюються. Якщо це не так - можете додати пункт\n" "вручну на цьому екран╕. Будьте уважн╕ при вибор╕ коректний\n" "параметр╕в. \n" "\n" "Основн╕ параметри Yaboot:\n" "\n" " * Пов╕домлення при завантаженн╕: просте текстове пов╕домлення, яке\n" "демонстру╓ться перед завантаженням.\n" "\n" " * Пристр╕й завантаження: вказу╓ на те, де саме запису╓ться\n" "╕нформац╕я потр╕бна для завантаження GNU/Linux. Загалом, вам потр╕бно\n" "назначити завантажувальний п╕дрозд╕л для того, щоб збер╕гати цю\n" "╕нформац╕ю. \n" "\n" " * Затримка Open Firmware: на в╕дм╕ну в╕д Lilo, тут ╓ дв╕ р╕зних\n" "пер╕оди затримки в Yaboot. Перший пер╕од затримки вим╕рю╓ться в\n" "секундах. П╕д час цього пер╕оду затримки ви можете вибрати зв╕дки\n" "завантажуватися: з компакт-диску, OF, MacOS чи Л╕накс.\n" "\n" " * Пер╕од затримки перед завантаженням ядра: цей пер╕од под╕бний до\n" "затримки Lilo. П╕сля вибору Л╕накса, затримка обчислю╓ться в десятих\n" "секунди перш, н╕ж почне завантажуватися стандартне ядро.\n" "\n" " * Дозволити завантаження з компакт-диску?: якщо цей параметр\n" "вибрано, ви можете натиснути 'C' при завантаженн╕ п╕д час першого\n" "пер╕оду затримки.\n" "\n" " * Дозволити завантаження OF: якщо ви виберете цей параметр, ви\n" "зможете натиснути 'N' п╕д час першого пер╕оду затримки для\n" "завантаження з Open Firmware.\n" "\n" " * Стандартна ОС: цим ви можете встановити стандартну систему, яка\n" "завантажиться п╕сля того, як зак╕нчиться затримка Open Firmware." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "Можете додати додатков╕ пункти для yaboot, або для операц╕йних систем,\n" "╕нших ядер чи для авар╕йного образу завантаження.\n" "\n" "Для ╕нших ОС - пункт склада╓ться т╕льки з етикетки та п╕дрозд╕лу для\n" "коренево╖ файлово╖ системи.\n" "\n" "Для Л╕накса ╓ к╕лька можливих параметр╕в: \n" "\n" " * Етикетка: це просто назва, яку ви ма╓те надрукувати при запрошенн╕\n" "yaboot, щоб вибрати цю опц╕ю завантаження.\n" "\n" " * Образ: це - назва ядра для завантаження. У б╕льшост╕ випадк╕в - це\n" "vmlinux або вар╕анти назви з р╕зними розширеннями.\n" "\n" " * Коренева файлова система: пристр╕й для коренево╖ файлово╖ системи,\n" "або '/' вашо╖ системи Л╕накс.\n" "\n" "\n" " * Додати: на апаратному забезпеченн╕ Apple досить часто\n" "використовуються додатков╕ параметри для ╕н╕ц╕ал╕зац╕╖ в╕део-плати або\n" "для того, щоб ╕н╕ц╕ал╕зувати клав╕атурну емуляц╕ю клав╕ш мишки, через\n" "те, що на стандартн╕й мишц╕ Apple нема╓ 2-╖ ╕ 3-╖ клав╕ш╕. Дал╕ подан╕\n" "деяк╕ приклади: \n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" "\n" " * Initrd: цей параметр може використовуватися для того, щоб\n" "завантажувати модул╕ до того, як пристр╕й завантаження доступний, або\n" "щоб прочитати в╕ртуальний диск для авар╕йного завантаження.\n" "\n" " * Розм╕р initrd: стандартний в╕ртуальний диск ма╓ розм╕р 4096 байт,\n" "якщо вам потр╕бен диск б╕льшого розм╕ру, можете скористуватися цим\n" "параметром.\n" "\n" " * Запис/читання: звично коренева файлова система монту╓ться в режим╕\n" "т╕льки для читання, для того, щоб мати можлив╕сть провести перев╕рку\n" "файлово╖ системи перш, н╕ж система завантажу╓ться в робочий режим. Це\n" "можна в╕дм╕нити тут.\n" "\n" " * БезВ╕део: у випадку, коли в╕део плата Apple виявиться особливо\n" "проблематичною, ви можете вибрати цей параметр для того, щоб\n" "скористуватися стандартним framebuffer'ом.\n" "\n" " * Стандарна: система вибрана в цьому пункт╕ завантажиться зразу\n" "п╕сля того, як ви натиснете ENTER на запрошенн╕ yaboot. Цей пункт буде\n" "також показаний символом *, якщо ви натиснете TAB, щоб подивитися\n" "список систем. " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, You'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX спробу╓ в╕дшукати вс╕ жорстк╕ диски у систем╕ ╕ одночасно\n" "в╕дшукати плати PCI SCSI. Якщо DrakX знайде плату SCSI ╕ зна╓ який\n" "драйвер використовувати з ц╕╓ю платою, в╕н автоматично встановить цей\n" "драйвер (ц╕ драйвери).\n" "\n" "В деяких випадках не вся апаратура розп╕зна╓ться повн╕стю. Якщо ви не\n" "ма╓те плати SCSI, ма╓те ISA SCSI плату, або PCI SCSI плату, яка не\n" "розп╕зна╓ться DrakX, Вам буде задане запитання, про те чи ╓ у Ваш╕й\n" "систем╕ SCSI плата. Якщо тако╖ плати у Вас нема╓, просто клацн╕ть на\n" "\"Н╕\". Якщо ви клацнете на \"Так\", Вам буде надано список драйвер╕в, з\n" "якого Вам треба вибрати потр╕бний.\n" "\n" "Якщо Вам потр╕бно буде вручну вибирати драйвер, DrakX запита╓ у Вас,\n" "чи ви хочете вказати як╕сь певн╕ опц╕╖ для драйвера. Краще, якщо Ви\n" "дозволите DrakX випробувати плату, щоб визначити потр╕бн╕\n" "опц╕╖. Звично це працю╓ нормально.\n" "\n" "Якщо це не спрацю╓, Вам сл╕д вказати потр╕бн╕ опц╕╖ для\n" "драйвера. Перегляньте \"Пос╕бник по установц╕\" (Розд╕л 3, п╕дрозд╕л\n" "\"Знаходження ╕нформац╕╖ про Вашу апаратуру\"), з документац╕╖ по\n" "апаратному забезпеченню або з домашньо╖ стор╕нки виробника апаратури\n" "або д╕знайтеся потр╕бн╕ параметри з Windows (якщо ви ма╓те цю систему\n" "на сво╓му комп'ютер╕)." #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing systems\n" "is best for a particular type of configuration.\n" "\n" " * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"pdq\n" "\" will handle only very simple network cases and is somewhat slow when\n" "used with networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "that may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader.\n" "\n" "\"Boot device\": in most cases, you will not change the default (\"First\n" "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n" "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n" "(\"On Floppy\")." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"Add\" to create a new entry; selecting an entry and\n" "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n" "your changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "LILO (the LInux LOader - завантажувач Л╕накса) та Grub -- це\n" "завантажувач╕ системи: вони можуть завантажити або GNU/Л╕накс або\n" "будь-яку ╕ншу операц╕йну систему на Вашому комп'ютер╕. За нормальних\n" "умов ц╕ операц╕йн╕ системи в╕рно визначаються та встановлюються. Якщо\n" "це не так, ви можете додати потр╕бний пункт самост╕йно. Уважно\n" "вибер╕ть потр╕бн╕ параметри.\n" "\n" "\n" "Ви, можливо, також захочете закрити доступ до цих операц╕йних систем\n" "╕ншим, в цьому випадку ви можете стерти в╕дпов╕дн╕ пункти в файл╕\n" "конф╕╜урац╕╖. Але в цьому випадку Вам потр╕бна буде спец╕альна\n" "дискета, щоб завантажити ц╕ системи!" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog allows to finely tune your bootloader:\n" "\n" " * \"Bootloader to use\": there are three choices for your bootloader:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": after a boot or a reboot of\n" "the computer, this is the delay given to the user at the console to select\n" "a boot entry other than the default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you do before changing any of the options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer advanced options\n" "that are reserved for the expert user." msgstr "" "LILO ╕ GRUB - це завантажувач╕ системи для GNU/Linux. Цей крок звично\n" "повн╕стю автоматизований. Фактично, drakX проведе анал╕з\n" "завантажувального сектора диску ╕ буде д╕яти в╕дпов╕дно до того, що в\n" "ньому виявиться:\n" "\n" " * якщо тут присутн╕й завантажувальний сектор Windows, в╕н зам╕нить\n" "його на сектор GRUB/LILO таким чином, щоб Ви могли стартувати обо╓ - ╕\n" "GNU/Linux, ╕ Windows;\n" "\n" " * якщо знайдений блок в╕д GRUB чи LILO, в╕н буде зам╕нений на новий. \n" "\n" "Якщо ситуац╕я не така ч╕тка, drakX запропону╓ Вам виб╕р з к╕лькома\n" "можливими виходами. \n" "\n" " * Який завантажувач вживати: Ви ма╓те три вар╕анти на виб╕р:\n" " \n" " * LILO з граф╕чним меню: якщо Ви нада╓те перевагу LILO з його\n" " граф╕чною оболонкою.\n" "\n" " * Grub: якщо Вам подоба╓ться Grub (з текстовим меню).\n" "\n" " * LILO з текстовим меню: якщо Вам подоба╓ться LILO з текстовим\n" " меню.\n" "\n" " * Пристр╕й завантаження: у б╕льшост╕ випадк╕в Вам не потр╕бно буде\n" "зм╕нювати неявно встановлений диск (/dev/hda), але якщо Вам потр╕бно,\n" "Ви можете встановити завантажувач на другому жорсткому диску\n" "(/dev/hdb) чи нав╕ть на дискет╕ (/de/fd0). \n" "\n" " * Затримка перед завантаженням основного ядра: це затримка при\n" "завантаженн╕ системи, яка нада╓ться користувачев╕, щоб в╕н мав\n" "можлив╕сть вибрати ╕нший пункт в меню завантажувача.\n" "\n" "!! Будьте уважними: якщо Ви натиснете кнопку \"В╕дм╕нити\" (╕ тим самим\n" "вкажете програм╕ не встановлювати системного завантажувача),\n" "пересв╕дч╕ться, що Ви ма╓те у запас╕ метод для завантаження системи\n" "Мандрейк Л╕накс! Будьте також певними, що Ви добре зна╓те, що Ви\n" "робити, коли Ви зм╕ню╓те будь-як╕ параметри тут!!\n" "\n" "Натиснувши кнопку \"Додатково\" в цьому в╕кн╕, Ви отрима╓те доступ до\n" "багатьох додаткових конф╕╜урац╕йних параметр╕в призначених для\n" "досв╕дчених користувач╕в.\n" "\n" "Мандрейк Л╕накс встановлю╓ св╕й власний системний завантажувач, який\n" "дозволить Вам завантажувати або GNU/Linux, або будь-яку ╕ншу\n" "операц╕йну систему, встановлену на ц╕й машин╕.\n" "\n" "Якщо на машин╕ встановлена ╕нша операц╕йна система, вона автоматично\n" "буде додана до списку систем в меню. Тут можна зм╕нити ╕снуюч╕\n" "параметри для завантаження кожно╖ системи. Подв╕йне клацання на пункт╕\n" "меню дозволить Вам зм╕нити ╕снуюч╕ параметри, або стерти даний пункт\n" "меню. \"Додати\" створюж новий пункт. ╤ \"Зак╕нчено\" переходить на\n" "наступний крок установки." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against. GNU/Linux is as prone to operator error as any other operating\n" "system. Since \"root\" can overcome all limitations and unintentionally\n" "erase all data on partitions by carelessly accessing the partitions\n" "themselves, it is important that it be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"Advanced\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you do not\n" "know which to use, ask your network administrator.\n" "\n" "If you happen to have problems with reminding passwords, you can choose to\n" "have \"No password\", if your computer won't be connected to the Internet,\n" "and if you trust anybody having access to it." msgstr "" "Наступне - найб╕льш вашливий крок з точки зору безпеки Вашо╖ системи\n" "GNU/Linux: виб╕р пароля для користувача Root. Root - це системний\n" "адм╕н╕стратор ╕ ╓дина особа, як╕й дозволено робити поновлення системи,\n" "додавати користувач╕в, зм╕нювати загальну конф╕╜урац╕ю системи, таке\n" "╕нше. Коротше - Root може все! Ось чому Вам сл╕д вибирати пароль, який\n" "важко вгадати, drakX скаже Вам, якщо пароль занадто легкий. Як\n" "показано, Вам необов'язково вводити пароль, але ми наст╕йливо\n" "рекоменду╓мо Вам все-таки вибрати пароль, хоча б з одн╕╓╖-╓жино╖\n" "причини: не думайте, що через те, що Ви завантажили GNU/Linux, Ваша\n" "система в╕льна в╕д помилок. Це не так, оск╕льки Root може переважити\n" "вс╕ заборони ╕ ненароком стерти вс╕ дан╕ на всих п╕дрозд╕лах\n" "звертаючись безпосередньо до п╕дрозд╕л╕в! Тому, доступ до рахунку root\n" "ма╓ бути захищеним.\n" "\n" "Пароль ма╓ бути сум╕шшю алфав╕тно-цифрових символ╕в ╕ бути завдовжки\n" "хоча-б 8 символ╕в. Н╕коли не записуйте пароль!\n" "\n" "Не вибирайте занадто довгий чи складний пароль. Вам його\n" "запам'ятовувати.\n" "\n" "Коли Ви будете друкувати пароль на екран╕, його не буде видно. Ось\n" "чому при вибор╕ пароля, Вам запропону╓ться ввести його дв╕ч╕, оск╕льки\n" "помилка при першому введенн╕ пароля, може бути проблемою: при\n" "ре╓страц╕╖ в систем╕ Вам треба буде користуватись \"нев╕рним\" паролем.\n" "\n" "В експертному режим╕, у Вас буде можлив╕сть вказати, чи Ви будете\n" "користуватися яким-небудь сервером автентикац╕╖: NIS чи LDAP.\n" "\n" "Якщо Ви користу╓тесь NIS'ом (чи LDAP) вибер╕ть опц╕ю \"Користуватись\n" "NIS'ом\" (\"LDAP\"). Якщо Ви не зна╓те цього, запитайте в свого\n" "системного адм╕н╕стратора.\n" "\n" "Якщо комп'ютер не п╕дключений до мереж╕, вибер╕ть Локальн╕ файли дли\n" "автентикац╕╖.." #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Будь-ласка, вибер╕ть в╕рний порт. Наприклад, порт п╕д назвою COM1 у MS\n" "Windows носить назву ttyS0 у GNU/Л╕накс╕." #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activated correctly. Once you\n" "see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n" "the buttons and check that the mouse pointer moves on-screen as you move\n" "your mouse." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation, thereby installing the\n" "language-specific files for system documentation and applications. For\n" "example, if you will host users from Spain on your machine, select English\n" "as the default language in the tree view and \"Espanol\" in the Advanced\n" "section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"All\n" "languages\" box. Selecting support for a language means translations,\n" "fonts, spell checkers, etc. for that language will be installed.\n" "Additionally, the \"Use Unicode by default\" checkbox allows to force the\n" "system to use unicode (UTF-8). Note however that this is an experimental\n" "feature. If you select different languages requiring different encoding the\n" "unicode support will be installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "Будь ласка, вибер╕ть мову для установку системи та користування п╕сля\n" "установки. \n" "\n" "Присутня також кнопка \"Додатково\", яка дозволя╓ Вам вибрати ╕нш╕ мови,\n" "як╕ можуть бути також установленими в систем╕. Ви зможете\n" "користуватися цими мовами п╕сля установки. Якщо, наприклад, на Ваш╕й\n" "машин╕ (у яко╖ англ╕йська встановлена основною мовою) будуть працювати\n" "╕спанц╕, вибер╕ть в додаткових мовах ╤спанська|╤спан╕я.\n" "\n" "П╕сля вибору мови ╕ п╕дтвердження, Ви автоматично переходите до\n" "наступного кроку." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you might not have a keyboard that corresponds exactly to your language:\n" "for example, if you are an English speaking Swiss person, you may have a\n" "Swiss keyboard. Or if you speak English but are located in Quebec, you may\n" "find yourself in the same situation where your native language and keyboard\n" "do not match. In either case, this installation step will allow you to\n" "select an appropriate keyboard from a list.\n" "\n" "Click on the \"More \" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Звично drakX вибира╓ в╕рну клав╕атуру (в залежност╕ в╕д мови, якою Ви\n" "користу╓тесь) ╕ Ви не побачите цього кроку. Однак, можливо, Ви не\n" "ма╓те клав╕атури, що точно в╕дпов╕да╓ Ваш╕й мов╕: наприклад, якщо Ви\n" "агломовний швед, Ви все-одно можете забажати користуватись шведською\n" "клав╕атурою. Або, якщо Ви говорите англ╕йською, але живете в Квебеку,\n" "Ви потрапля╓те в анало╜╕чну ситуац╕ю. В обох випадках, Вам потр╕бно\n" "повернутись до цього етапу установки ╕ вибрати в╕дпов╕дну клав╕атуру з\n" "наданого списку. Все, що потр╕бно, це вибрати потр╕бну клав╕атуру ╕з\n" "списку, що з'явля╓ться перед Вами.\n" "\n" "Натисн╕ть кнопку Додатково ╕ Ви побачите повний список розкладок\n" "клав╕атур." #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"Install\": For the most part, this completely wipes out the old\n" "system. If you wish to change how your hard drives are partitioned, or\n" "change the file system, you should use this option. However, depending on\n" "your partitioning scheme, you can prevent some of your existing data from\n" "being over- written.\n" "\n" " * \"Upgrade\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"Country\": check the current country selection. If you are not in this\n" "country, click on the \"Configure\" button and choose another one. If your\n" "country is not in the first list shown, click the \"More\" button to get\n" "the complete country list." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "На Вашому диску знайдено б╕льше одного п╕дрозд╕ла, що належать\n" "операц╕йн╕й систем╕ В╕ндовс. Вибер╕ть, будь-ласка, один з них, розм╕р\n" "якого би ви хот╕ли зм╕нити, для того щоб встановити операц╕йну систему\n" "Мандрейк Л╕накс.\n" "\n" "Кожен п╕дрозд╕л подано в такому вигляд╕: \"Назва в Л╕накс╕\", \"Назва у\n" "В╕ндовс\", \"Розм╕р\".\n" "\n" "\"Назва в Л╕накс╕\" закодована таким чином: \"тип жорсткого диску\",\n" "\"номер жорсткого диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад:\n" "\"hda1\").\n" "\n" "Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" "якщо ви ма╓те жорсткий диск типу SCSI.\n" "\n" "\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" "диск╕в типу IDE це:\n" "\n" " * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" "\n" " * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" "\n" " * \"c\" - головний диск на другому контролер╕ IDE,\n" "\n" " * \"d\" - вторинний диск на другому контролер╕ IDE.\n" "\n" "Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " "╕\n" "т.д. ...\n" "\n" "\"Назва у В╕ндовс\" - це л╕тера Вашого жорсткого диску, як ви ╖╖ бачите\n" "при робот╕ у В╕ндовс (перший диск чи п╕дрозд╕л назива╓ться \"C:\")." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive\n" "\n" " * \"Auto allocate\": this option enables you to automatically create ext3\n" "and swap partitions in free space of your hard drive\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended that you perform this step.\n" "\n" " * \"Restore partition table\": allows you to restore a previously saved\n" "partition table from a floppy disk.\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "doesn't always work.\n" "\n" " * \"Reload partition table\": discards all changes and reloads the\n" "partition table that was originally on the hard drive.\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good\n" "understanding of partitioning.\n" "\n" " * \"Undo\": use this option to cancel your changes.\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information about the\n" "hard drive.\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Зараз Вам потр╕бно вибрати, як╕ п╕дрозд╕ли використовувати для Вашо╖\n" "ново╖ системи Л╕накс Мандрейк. Якщо ц╕ п╕дрозд╕ли вже були визначен╕\n" "(в╕д попередньо╖ установки системи GNU/Linux або створен╕ ╕ншою\n" "програмою розпод╕лу диску), ви можете скористатися вже готовими\n" "п╕дрозд╕лами. В ╕ншому випадку, п╕дрозд╕ли на жорсткому диску мають\n" "бути визначеними перш, н╕ж переходити до установки.\n" "\n" "Для створення п╕дрозд╕л╕в ви спершу ма╓те вибрати жорсткий диск. Ви\n" "можете вибрати диск клацнувши на \"hda\" (якщо мова йде про перший диск\n" "типи IDE), або на \"hdb\" (для другого диску в систем╕ типу IDE), або на\n" "\"sda\", якщо ви будете встановлювати систему на першому диску типу SCSI\n" "╕ так дал╕.\n" "\n" "Щоб розпод╕лити диск на розд╕ли, ви можете скористатися цими пунктами меню:\n" "\n" "* Очистити все: цей пункт стира╓ вс╕ п╕дрозд╕ли на вибраному жорсткому " "диску.\n" "\n" "* Розпод╕лити автоматично: цей пункт меню допоможе Вам автоматично\n" "створити п╕дрозд╕л типу Ext2 та swap на в╕льному простор╕ диску.\n" "\n" "* В╕дновити таблицю п╕дрозд╕л╕в: якщо таблиця п╕дрозд╕л╕в Вашого диску\n" "з╕псована, ви можете спершу спробувати в╕дновити ╖╖ скористувавшись\n" "цим пунктом. Будь-ласка, будьте-обережними, ╕ пам'ятайте, що цей пункт\n" "не завжди спрацьову╓.\n" "\n" "* Повернутись: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" "внесених вами.\n" "\n" "* Перечитати: Можете скористуватись цим, щоб в╕дмовитись в╕д зм╕н,\n" "внесених вами ╕ перепрочитати ори╜╕нальну таблицю п╕дрозд╕л╕в.\n" "\n" "\n" "* Пом╕чник: Якщо ви хочете скористатись пом╕чником для розпод╕лу\n" "диску. Рекомендований режим, якщо ви не ма╓те глибоких знань про\n" "розпод╕л диску. \n" "\n" "* В╕дновити з гнучкого диску: Якщо ви записали попередньо свою таблицю\n" "п╕дрозд╕л╕в на гнучкий диск. Зараз ви можете в╕дновити цю таблицю з\n" "гнучкого диску.\n" "\n" "* Записати на гнучкий диск: Якщо ви хочете записати зараз таблицю\n" "п╕дрозд╕л╕в на гнучкий диск для того, щоб ╖╖ пот╕м можна було\n" "в╕дновити з дискети. Дуже рекоменду╓мо скористуватися цим режимом. \n" "\n" "* Готово: П╕сля того, як ви вже зак╕нчили з перерозпод╕лом Вашого\n" "жорсткого диску, скористайтесь цим пунктом, щоб записати зм╕ни на\n" "диск. \n" "\n" "Коли певний п╕дрозд╕л вибрано, можете скористуватись клав╕шами:\n" "\n" " * Ctrl-c щоб створити новий п╕дрозд╕л (якщо вибрано пустий " "п╕дрозд╕л)\n" "\n" " * Ctrl-d щоб стерти п╕дрозд╕л\n" "\n" " * Ctrl-m щоб визначити точку монтування\n" "\n" "Якщо ви встановлю╓те систему на комп'ютер з процесором PPC, ви можете\n" "створити маленький п╕дрозд╕л типу HFS для завантаження 'bootstrap'\n" "(розм╕ром не менше 1Мб для завантажувача yaboot. Якщо ви вир╕шите\n" "створити п╕дрозд╕л трохи б╕льшого розм╕ру (скаж╕мо 50Мб, ви зможете\n" "також збер╕гати на ньому резервне ядро системи та в╕ртуальний диск для\n" "авар╕йних завантажень системи). " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "Тепер час вибрати р╕вень доступу (безпеки) для Вашо╖ системи. Золоте\n" "правило: чим ширше коло доступу ма╓ машина, ╕ чим важлив╕ш╕ дан╕, що в\n" "н╕й збер╕гаються, тим вищим ма╓ бути р╕вень безпеки системи. Але в\n" "б╕льшост╕ випадк╕в, вищий р╕вень безпеки досяга╓ться за рахунок\n" "додаткових незручностей в користуванн╕. Додаткову ╕нформац╕ю з цього\n" "питання можна отримати з секц╕╖ MSEC в Дов╕дковому Пос╕бнику.\n" "\n" "Якщо Ви не зна╓те, на чому зупинитись, залиште все як ╓." #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"Yes\"\n" "if you have a working Internet connection, or \"No\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"Yes\" will display a list of places from which updates can be\n" "retrieved. Choose the one nearest you. A package-selection tree will\n" "appear: review the selection, and press \"Install\" to retrieve and install\n" "the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"Next ->\" when you are ready to format partitions.\n" "\n" "Click on \"<- Previous\" if you want to choose another partition for your\n" "new Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "Будь-який з нових визначених п╕дрозд╕л╕в ма╓ бути в╕дформатований для\n" "використання (форматування означа╓ створення файлово╖ системи).\n" "\n" "Зараз Ви, можливо, захочете в╕дформатувати деяк╕ з уже ╕снуючих\n" "п╕дрозд╕л╕в для того, щоб стерти дан╕, як╕ на них записан╕. Якщо Ви\n" "хочете це зробити, вибер╕ть також п╕дрозд╕ли, як╕ ви хочете\n" "в╕дформатувати.\n" "\n" "Зауважте, однак, що не обов'язково форматувати вс╕ п╕дрозд╕ли, як╕\n" "╕снували ран╕ше. Ви ма╓те в╕дформатувати п╕дрозд╕ли, як╕ м╕стять\n" "операц╕йну систему (так╕, як \"/\", \"/usr\" чи \"/var\"), але ви не ма╓те\n" "форматувати т╕ розд╕ли, як╕ м╕стять дан╕, як╕ ви б хот╕ли зберегти\n" "(типово це п╕дрозд╕л \"/home\").\n" "\n" "Будьте уважн╕ з вибором п╕дрозд╕л╕в. П╕сля форматування вс╕ дан╕ на\n" "п╕дрозд╕лах будуть стерт╕ ╕ ви не зможете в╕дновити н╕чого з них.\n" "\n" "Клацн╕ть на \"Гаразд\" коли ви готов╕ приступити до форматування\n" "п╕дрозд╕л╕в.\n" "\n" "Клацн╕ть на \"В╕дм╕нити\", якщо ви хочете вибрати ╕нш╕ п╕дрозд╕ли для\n" "того, щоб встановити нову систему Мандрейк Л╕накс.\n" "\n" "Натисн╕ть на Додатково, якщо Ви хочете вибрати п╕дрозд╕ли для ╖хньо╖\n" "перев╕рки на ╕снування зб╕йних блок╕в." #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"Next ->\" to reboot the system. The first thing\n" "you should see after your computer has finished doing its hardware tests is\n" "the bootloader menu, giving you the choice of which operating system to\n" "start.\n" "\n" "The \"Advanced\" button shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "that will automatically perform a whole installation without the help of an\n" "operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation. The\n" "partitioning step is the only interactive procedure.\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"Save packages selection\"(*): saves a list of the package selected in\n" "this installation. To use this selection with another installation, insert\n" "the floppy and start the installation. At the prompt, press the [F1] key\n" "and type >>linux defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"Use free space\": this option will perform an automatic partitioning\n" "of your blank drive(s). If you use this option there will be no further\n" "prompts.\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated with\n" "each of the partitions. The legacy mount points are selected by default,\n" "and for the most part it's a good idea to keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n" "or resize your Microsoft Windows FAT partition. Resizing can be performed\n" "without the loss of any data, provided you previously defragment the\n" "Windows partition and that it uses the FAT format. Backing up your data is\n" "strongly recommended.. Using this option is recommended if you want to use\n" "both Mandrake Linux and Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful, because you will not be able to\n" "undo your choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Custom disk partitioning\": choose this option if you want to manually\n" "partition your hard drive. Be careful -- it is a powerful but dangerous\n" "choice and you can very easily lose all your data. That's why this option\n" "is really only recommended if you have done something like this before and\n" "have some experience. For more instructions on how to use the DiskDrake\n" "utility, refer to the ``Managing Your Partitions '' section in the\n" "``Starter Guide''." msgstr "" "Тепер ви ма╓те вибрати де саме ви б хот╕ли встановити свою систему\n" "Мандрейк Л╕накс на жорсткому диску. Якщо диск пустий, або якщо в╕н\n" "повн╕стю зайнятий ╕ншою операц╕йною системою, Вам потр╕бно буде\n" "перерозпод╕лити диск. Фактично, перерозпод╕л жорсткого диску означа╓,\n" "що диск буде розд╕лено на лог╕чн╕ п╕дрозд╕ли, для того, щоб створити\n" "прост╕р для установки Мандрейк Л╕накса.\n" "\n" "Через те, що насл╕дки в╕д перерозпод╕лу диску звичайно незворотн╕, ця\n" "операц╕я може бути хвилюючою для недосв╕дченого користувача.\n" "\n" "Якщо Ви користу╓тесь програмою установки в експертному режим╕, Ви\n" "вв╕йдете в зас╕б для розбивки диск╕в на п╕дрозд╕ли Мандрейк Л╕накса:\n" "DiskDrake. В╕д нада╓ можлив╕сть точного вибору розм╕р╕в\n" "п╕дрозд╕л╕в. Подив╕ться розд╕л DiskDrake в п╕дручнику. Ви можете також\n" "скористуватись пом╕чниками для р╕зних етап╕в установки, якщо клацнете\n" "кнопку Пом╕чник.\n" "\n" "Цей пом╕чник спрощу╓ процес. Перш, н╕ж починати перерозпод╕л диску,\n" "проконсультуйтесь з пос╕бником користувача.\n" "\n" "Якщо п╕дрозд╕ли вже було визначено (в╕д попередньо╖ установки або за\n" "допомогою ╕ншо╖ програми розпод╕лу диск╕в), Вам потр╕бно буде вибрати\n" "ц╕ п╕дрозд╕ли для увстановлення операц╕йно╖ системи Л╕накс на цих\n" "п╕дрозд╕лах.\n" "\n" "Якщо так╕ п╕дрозд╕ли ще не були визначен╕, Вам потр╕бно буде ╖х\n" "створити. Для цього ви можете скористуватися пом╕чником, який Ви\n" "бачите вгор╕. В залежност╕ в╕д конф╕╜угац╕╖ Вашого жорсткого диску, Ви\n" "можете мати к╕лька р╕зних вар╕ант╕в конф╕╜урац╕╖.\n" "\n" "* Користуватися ╕снуючими п╕дрозд╕лами: пом╕чник виявив один або\n" "б╕льше п╕дрозд╕л╕в Л╕накса на Вашому жорсткому диску. Якщо ви хочете\n" "зберегти ц╕ п╕дрозд╕ли, вибер╕ть цей пункт.\n" "\n" "\n" "* Стерти весь диск: якщо ви хочете стерти вс╕ дан╕ на вс╕х п╕дрозд╕лах\n" "Вашого жорсткого диску ╕ зам╕нити ╖х новою системою Мандрейк Л╕накс,\n" "можете вибрати цю опц╕ю. Будьте уважн╕, бо вибравши цей\n" "режим, ви вже не зможете повернутись назад.\n" "\n" "* Скористуватись в╕льним простором на п╕дрозд╕л╕ операц╕йно╖ системи\n" "Windows: якщо на комп'ютер╕ встановлена операц╕йна система Microsoft\n" "Windows ╕ вона займа╓ весь прост╕р на Вашому жорсткому диску, Ви\n" "повинн╕ створити в╕льний прост╕р на диску для Л╕накса. Це можна\n" "зробити, стерши повн╕стю всю систему Windows (див. \"Стерти весь диск\"\n" "або режим установки \"Експерт\") або зм╕нивши розм╕р п╕дрозд╕лу, який\n" "зайнятий Windows. Зм╕на розм╕ру п╕дрозд╕лу може бути зроблена без\n" "втрати даних. Цей спос╕б установки рекоменду╓ться, якщо ви хочете мати\n" "обидв╕ системи, ╕ Microsoft Windows, ╕ Мандрейк Л╕накс встановлен╕ на\n" "сво╓му комп'ютер╕.\n" "\n" "Перш, н╕ж вибирати цей режим, зрозум╕йте, що у цьому випадку розм╕р\n" "п╕дрозд╕лу для Microsoft Windows буде меншим, н╕ж зараз. Це означа╓,\n" "що ви будете мати менше в╕льного простору при робот╕ в Microsoft\n" "Windows для запису Ваших даних та програм.\n" "\n" "* Стерти Windows: це просто з╕тре повн╕стю весь диск ╕ почне св╕жий\n" "под╕л на п╕дрозд╕ли. Вс╕ дан╕ на диску буде втрачено.\n" "\n" "!! Якщо Ви виберете цей пункт, вс╕ дан╕ на диску будуть втрачен╕. !!\n" "\n" "* Експертний режим: якщо ви хочете вручну перерозпод╕лити прост╕р на\n" "Вашому жорсткому диску, ви можете вибрати цей режим. Однак будьте\n" "обережними перш, н╕ж вибирати цей режим. Це -- потужний, але дуже\n" "небезпечний режим. Ви можете втратити вс╕ дан╕ дуже просто. Отже, не\n" "вибирайте цей режим, якщо добре не розум╕╓те, що саме ви робите." #: ../../help.pm:1 #, c-format msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "П╕сля цього Вам буде задане запитання, чи хот╕ли б Ви, щоб граф╕чний\n" "╕нтерфейс вмикався автоматично при завантаженн╕ системи. Зауважте, що\n" "це запитання буде задане нав╕ть якщо Ви в╕дмовитесь в╕д випробовування\n" "конф╕╜урац╕╖. Звичайно ж, якщо Ваша машина буде працювати сервером,\n" "або якщо Ви не змогли в╕рно настро╖ти X, тут краще в╕дпов╕сти \"Н╕\"." #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented the list of different parameters to change to get an\n" "optimal graphical display: Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer can normally automatically detect and configure the\n" "monitor connected to your machine. If it is not the case, you can choose in\n" "this list the monitor you actually own.\n" "\n" "\n" "\n" "Resolution\n" "\n" " You can choose here resolutions and color depth between those available\n" "for your hardware. Choose the one that best suit your needs (you will be\n" "able to change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"Yes\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " You can here choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"No\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer can normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose in this list the card you actually own.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then proposed to choose the server that\n" "best suits your needs." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n" "system clock and the hardware clock are in the same timezone. This is\n" "useful when the machine also hosts another operating system like Windows.\n" "\n" "The \"Automatic time synchronization \" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. For this\n" "feature to work, you must have a working Internet connection. It is best to\n" "choose a time server located near you. This option actually installs a time\n" "server that can used by other machines on your local network." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not always needed at\n" "boot time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Ви можете вибрати як╕ серв╕си будуть запускатися автоматично при\n" "старт╕ системи. \n" "\n" "Тут нада╓ться список вс╕х служб, що можуть встановлюватися програмою\n" "установки. Перегляньте уважно ц╕ служби ╕ в╕дм╕н╕ть виб╕р тих, як╕ не\n" "повинн╕ запускатися при старт╕ системи.\n" "\n" "Коли Ваша мишка насува╓ться на один ╕з пункт╕в, невеличка кулька ╕з\n" "п╕дсказкою з'явиться, яка опису╓ функц╕╖ даного серв╕су.\n" "\n" "Будьте особливо уважними, якщо ви збира╓тесь використовувати цю\n" "систему як сервер: напевне не потр╕бно стартувати н╕як╕ серв╕си, як╕\n" "не будуть використовуватися. Пам'ятайте, будь-ласка, що деяк╕ вмикнен╕\n" "серв╕си можуть бути небезпечними на сервер╕.\n" "Як загальне правило, вибирайте т╕льки т╕ серв╕си, як╕ Вам справд╕ \n" "необх╕дн╕." #: ../../help.pm:1 #, c-format msgid "" "\"Printer\": clicking on the \"Configure\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"Next\n" "->\". Mandrake Linux will attempt to autodetect network devices and modems.\n" "If this detection fails, uncheck the \"Use auto detection\" box. You may\n" "also choose not to configure the network, or to do it later, in which case\n" "clicking the \"Cancel\" button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Вибер╕ть коректну опц╕ю для з'╓днання, якщо Ви бажа╓те п╕дключити св╕й\n" "комп'ютер до глобальних тенет чи локально╖ мереж╕. Перш, н╕ж вибирати\n" "опц╕ю для з'╓днання, вмикн╕ть пристр╕й, щоб DrakX м╕г визначити\n" "пристр╕й автоматично.\n" "\n" "Мандрейк Л╕накс пропону╓ конф╕╜урац╕ю з'╓днання з тенетами при\n" "установц╕. Доступн╕ типи конф╕╜урац╕й: звичайний модем, модем ISDN,\n" "з'╓днання ADSL, кабельний модем ╕, нарешт╕, звичайне з'╓днання\n" "локально╖ мереж╕ (Ethernet).\n" "\n" "Тут ми не розгляда╓мо вс╕х подробиць кожного типу з'╓днання. Просто\n" "пересв╕дч╕ться, що Ви ма╓те вс╕ необх╕дн╕ дан╕ в╕д провайдера послуг\n" "тенет чи системного адм╕н╕стратора.\n" "\n" "Можете звернутися до пос╕бника за додатковою ╕нформац╕╓ю, чи просто\n" "зачекайте, доки система встановиться, ╕ скористайтесь програмою для\n" "встановлення конф╕╜урац╕╖ з'╓днання тенет.\n" "\n" "Якщо Ви не ма╓те н╕яко╖ мереж╕, н╕ з глобальними тенетеми, н╕ з\n" "локальною мережею, натисн╕ть кнопку \"Заборонити мережу\".\n" "\n" "Якщо ж Ви хочете сконф╕╜урувати мережу п╕зн╕ше, п╕сля установки,\n" "натисн╕ть на \"Зак╕нчено\"." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes \" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"Automatic dependencies\" option is used to disable the warning dialog\n" "which appears whenever the installer automatically selects a package to\n" "resolve a dependency issue. Some packages have relationships between each\n" "other such that installation of a package requires that some other program\n" "is already installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "╤ нарешт╕, в залежност╕ в╕д того, чи Ви вибрали ╕ндив╕дуальний виб╕р\n" "пакет╕в чи н╕, Вам буде показано повне дерево пакет╕в з╕браних по\n" "групах ╕ п╕дгрупах. Переглядаючи пакети Ви зможете вибрати повн╕\n" "групи, п╕дгрупи та ╕ндив╕дуальн╕ пакети.\n" "\n" "Кожного разу, коли Ви вибира╓те пакет в дерев╕, з'явла╓ться п╕дказка,\n" "праворуч в╕д назви. \n" " \n" "П╕сля того, як Ви зак╕нчили виб╕р пакет╕в, натисн╕ть кнопку\n" "Встановити. Почнеться власне установка системи. Якщо к╕льк╕сть\n" "вибраних пакет╕в велика, можете п╕ти попити кави.\n" "\n" "!! Якщо або навмисне, або як складова частина яко╖сь групи, було\n" "вибрано для установки певн╕ сервери, Вам буде задане запитання, чи Ви\n" "справд╕ бажа╓те бачити ц╕ сервери встановленими. В Мандрейку вс╕\n" "встановлен╕ сервери автоматично запускаються при завантаженн╕\n" "системи. Нав╕ть, якщо на час куп╕вл╕ системи не було в╕домо проблем з\n" "безпекою даних сервер╕в, можливо, що в п╕зн╕ший час так╕ проблеми\n" "будуть виявлен╕. Особливо, якщо Ви не зна╓те про що йде мова,\n" "натисн╕ть тут на Н╕. Якщо Ви натиснете Так, сервери будуть встановлен╕\n" "╕ вмикнен╕ неявно!!\n" "\n" "Опц╕я Автоматичн╕ залежност╕ забороня╓ попередження коли програма\n" "установки знаходить, що т╕льки що вибраний (чи в╕дм╕нений виб╕р) пакет\n" "залежить в╕д ╕ншого пакету.\n" "\n" "Маленька п╕ктограма гнучкого диска в самому низу списку дозволя╓\n" "завантажити список пакет╕в з дискети, якщо при попередн╕й установц╕ Ви\n" "зберегли його на дискету. П╕сля натискання ц╕╓╖ кнопки, система\n" "попросить вставити дискету ╕з списком пакет╕в у прив╕д. Додатково Ви\n" "можете отримати ╕нформац╕ю про те, як створити таку дискету в друг╕й\n" "порад╕ останнього пункту." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various containers, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' container installed.\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the applications that are in the workstation\n" "container.\n" "\n" " * \"Development\": if plan on using your machine for programming, choose\n" "the appropriate packages from the container.\n" "\n" " * \"Server\": if your machine is intended to be a server, select which of\n" "the more common services you wish to install on your machine.\n" "\n" " * \"Graphical Environment\": this is where you will choose your preferred\n" "graphical environment. At least one must be selected if you want to have a\n" "graphical interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server.\n" "\n" " * \"Truly minimal install\": will install the absolute minimum number of\n" "packages necessary to get a working Linux system. With this installation\n" "you will only have a command line interface. The total size of this\n" "installation is 65 megabytes.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Тепер час вибрати, як╕ програми Ви хочете мати в сво╖й\n" "систем╕. Мандрейк Л╕накс ма╓ тисяч╕ програмних пакет╕в, ╕ Вам нема╓\n" "необх╕дност╕ знати ╖х вс╕. \n" "\n" "Якщо Ви встановлю╓те систему ╕з стандартного компакт-диску, Вам\n" "спочатку буде задане запитання, як╕ диски Ви ма╓те. Перев╕рте сво╖\n" "компакт-диски, в╕дм╕тьте в╕дпов╕дн╕ пункти на екран╕ ╕ натисн╕ть\n" "Гаразд.\n" "\n" "Пакети з╕бран╕ у групи пакет╕в, в╕дпов╕дно до конкретного вжитку для\n" "машини.\n" "\n" "Групи пакет╕в розд╕лен╕ на чотири велик╕ розд╕ли:\n" "\n" "* Робоча станц╕я: якщо Ваша машина буде вживатися як робоча станц╕я,\n" "вибер╕ть одну чи к╕лька в╕дпов╕дних груп.\n" "\n" "* Граф╕чн╕ середовища: Вибер╕ть граф╕чне середовище соб╕ до\n" "вподоби. Вибер╕ть хоча б одне, якщо Ви хочете вживати машину як робочу\n" "станц╕ю.\n" "\n" "* Розробка: вибер╕ть в╕дпов╕дн╕ групи, якщо ця машина буде вживатися\n" "для програмування.\n" "\n" "* Сервер: нарешт╕, якщо машина буду╓ться для використання в якост╕\n" "сервера, Ви можете вибрати найб╕льш розповсюджен╕ серв╕си, як╕ Ви\n" "хочете бачити на сво╖й машин╕.\n" "\n" "Пересування курсора ╕ коротка зупинка над певним пунктом буде\n" "висв╕чувати п╕дказку по дан╕й груп╕.\n" "\n" "Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" "вибрати окрем╕ пакети один по одному. Це зручно, якщо Ви добре зна╓те,\n" "як╕ пакети встановлюються, або якщо Ви хочете мати повний контроль над\n" "тим, що встановлю╓ться в систем╕. \n" "\n" "Якщо Ви почали установку в режим╕ \"Поновлення\", Ви можете в╕дм╕нити\n" "виб╕р вс╕х груп щоб у систем╕ не встановлювались н╕як╕ нов╕ пакети ╕\n" "т╕льки система поновилась. " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "Дистрибутив Мандрейк Л╕накс розм╕щений на к╕лькох\n" "компакт-дисках. Можливо, drakX вибрав пакети, що знаходяться на ╕нших\n" "дисках (в╕дм╕нних в╕д установочного). Коли для установки буде потр╕бен\n" "╕нший диск, програма витягне даний компакт-диск ╕ попросить вставити\n" "потр╕бний. " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Here are Listed the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Вище перел╕чен╕ вже ╕снуюч╕ п╕дрозд╕ли, знайден╕ на Вашому жорсткому\n" "диску. Ви можете притримуватись конф╕╜урац╕╖, встановлено╖\n" "пом╕чником. Ця конф╕╜урац╕я п╕дходить для б╕льшост╕ випадк╕в\n" "використання системи. Якщо ви вир╕шите зм╕нити цю конф╕╜урац╕ю, як\n" "м╕н╕мум Ви ма╓те визначити кореневу файлову систему (/). Не вид╕ляйте\n" "для цього занадто малий п╕дрозд╕л, бо ╕накше ви не зможете встановити\n" "все потр╕бне програмне забезпечення. Якщо ви бажа╓те зберегти вс╕ сво╖\n" "дан╕ на окремому п╕дрозд╕л╕, Вам потр╕бно буде також вибрати п╕дрозд╕л\n" "для \"/home\" (т╕льки в тому випадку, якщо ви ма╓те б╕льше одного\n" "п╕дрозд╕ла для Л╕накса). \n" "\n" "Кожен п╕дрозд╕л поданий в такому вигляд╕: \"Назва\", \"Об'╓м\".\n" "\n" "Назва розшифрову╓ться так: \"тип жорсткого диску\", \"номер жорсткого\n" "диску\", \"номер п╕дрозд╕лу на диску\", (Наприклад: \"hda1\").\n" "\n" "\"Тип жорсткого диску\" - це \"hd\", якщо ви ма╓те диск типу IDE, ╕ \"sd\",\n" "якщо ви ма╓те жорсткий диск типу SCSI.\n" "\n" "\"Номер жорского диску\" - це завжди л╕тера п╕сля \"hd\" чи \"sd\". Для\n" "диск╕в типу IDE це:\n" "\n" " * \"a\" - головний диск (master) на першому контролер╕ IDE,\n" "\n" " * \"b\" - вторинний (slave) диск на першому контролер╕ IDE,\n" "\n" " * \"c\" - головний диск на другому контролер╕ IDE,\n" "\n" " * \"d\" - вторинний диск на другому контролер╕ IDE.\n" "\n" "Для SCSI диск╕в \"a\" означа╓ \"головний диск\", \"b\" - другорядний диск, " "╕\n" "т.д. ..." #: ../../help.pm:1 #, fuzzy, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user can have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", which is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configuration, protecting the system from unintentional or malicious\n" "changes that impact the system as a whole. You will have to create at least\n" "one regular user for yourself -- this is the account which you should use\n" "for routine, day-to-day use. Although it is very easy to log in as \"root\"\n" "to do anything and everything, it may also be very dangerous! A mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, the worst that will happen is that you will lose\n" "some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in and copy it to the \"User name\" field, which is the name this\n" "user will enter to log onto the system. If you like, you may override the\n" "default and change the username. The next step is to enter a password. From\n" "a security point of view, a non-privileged (regular) user password is not\n" "as crucial as the \"root\" password, but that is no reason to neglect it by\n" "making it blank or too simple: after all, your files could be the ones at\n" "risk.\n" "\n" "Once you click on \"Accept user\", you can add other users. Add a user for\n" "each one of your friends: your father or your sister, for example. Click\n" "\"Next ->\" when you have finished adding users.\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Next\n" "->\". If you are not interested in this feature, uncheck the \"Do you want\n" "to use this feature?\" box." msgstr "" "GNU/Linux - багатокористувацька система, ╕ це означа╓, що кожен з\n" "користувач╕в може мати сво╖ власн╕ установки, власн╕ файли, тощо. Щоб\n" "б╕льше д╕знатися про це Ви можете прочитати П╕дручник користувача з\n" "системи. Але на в╕дм╕ну в╕д користувача Root, який ╓ адм╕н╕стратором\n" "системи, користувач╕, яких Ви будете створювати на цьому кроц╕, не\n" "мають права зм╕нювати н╕чого в систем╕ кр╕м сво╖х власних файл╕в ╕\n" "власно╖ конф╕╜урац╕╖. Ви ма╓те створити рахунок для хоча б одного\n" "╓диного користувача - для самого себе. Ви будете користуватися цим\n" "рахунком для того, щоб виконувати щоденн╕ задач╕. ╤ хоча це ╕ дуже\n" "зручно ре╓струватись в систем╕ як Root, але одночасно це ╕ дуже\n" "небезпечно! Найменша помилка може призвести до того, що система буде\n" "неробочою. Якщо Ви помилитесь як звичайний користувач, Ви можете,\n" "звичайно, втратити деяк╕ сво╖ дан╕, але не всю систему.\n" "\n" "Спочатку надрукуйте сво╓ повне ╕м'я. Це не обов'язково, Ви можете\n" "надрукувати все, що завгодно. drakx пот╕м в╕зьме перше слово ╕\n" "використа╓ його як ╕м'я користувача. Це - ╕м'я п╕д яким користувач\n" "буде ре╓струватись у систем╕. Ви можете зм╕нити це ╕м'я. Пот╕м Ви\n" "ма╓те ввести пароль. Пароль звичайного (не root) користувача не така\n" "критична р╕ч, як пароль адм╕н╕стратора, але все-одно нема╓ причин для\n" "того, щоб нехтувати ним. Врешт╕-решт, це загрожу╓ Вашим власним\n" "файлам. \n" "\n" "П╕сля того, як Ви натиснете на кнопку Прийняти користувача, Ви можете\n" "створити ще багато ╕нших користувач╕в. Створ╕ть рахунки для кожного з\n" "Ваших друз╕в, для тата й сестри, наприклад. П╕сля того, як створено\n" "вс╕ потр╕бн╕ рахунки користувач╕в, натисн╕ть клав╕шу Зак╕нчено.\n" "\n" "Якщо Ви натиснете на кнопку Додатково, Ви будете мати можлив╕сть\n" "встановити командну оболонку даного користувача (неявно встановлю╓ться\n" "bash). " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"Accept\" box. If not, simply turn off your\n" "computer." msgstr "" "Перш, н╕ж ╕ти дал╕, Ви ма╓те прочитати уважно умови л╕ценз╕╖. Вона\n" "стосу╓ться всього диструбутиву Мандрейк Л╕накс, ╕, якщо Ви не\n" "погоджу╓тесь з умовами л╕ценз╕╖, натисн╕ть кнопку В╕дмовитись. Це того\n" "ж часу в╕дм╕нить установку системи. Для продовження установки\n" "натисн╕ть кнопку Погодитись." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Сталася помилка - не знайдено в╕дпов╕дних диск╕в для створення новихфайлових " "систем. Перев╕рте будь-ласка свою систему ╕ спробуйтев╕дшукати причину цього." #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "Помилка при читанн╕ файла %s" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Для того, щоб використовувати записан╕ вибран╕ пакети, завантажте\n" "систему з ``linux defcfg=floppy''" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "Ця дискета не в╕дформатована як FAT" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Вставте дискету в╕дформатовану у FAT в дисков╕д %s" #: ../../install_any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Не можу використовувати трансляц╕ю без NIS домену" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Н╕" #: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Так" #: ../../install_any.pm:1 #, fuzzy, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Ви вибрали так╕(ий) сервер(и): %s\n" "\n" "Ц╕ сервери стандартно актив╕зован╕. Для них нев╕дом╕ н╕як╕ проблеми з\n" "безпекою, але деяк╕ можуть бути виявлен╕. В такому випадку ви повинн╕\n" "якомога швидше поновити верс╕╖ цих сервер╕в. \n" "\n" "Ви хочете дозволити установку цих сервер╕в?\n" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System installation" msgstr "Установка SILO" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Вимикаю мережу" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Вмикаю мережу" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Розбиття на п╕дрозд╕ли невдале: %s" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Пом╕чник розбивки на п╕дрозд╕ли DrakX знайшов так╕ можлив╕ р╕шення:" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "Не можу знайти в╕льного простору для установки" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Тепер ви можете розбити на п╕дрозд╕ли Ваш диск %s.\n" "П╕сля того, як ви зак╕нчите не забудьте виконати команду `w'" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Використовувати fdisk" #: ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Спец╕альний розпод╕л диску" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "ВС╤ ╕снуюч╕ п╕дрозд╕ли та вс╕ дан╕ на диску %s будуть втрачен╕" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "У Вас б╕льше одного диску. На який з них ви хочете встановити Л╕накс?" #: ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Стерти весь диск" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Стерти Windows(TM)" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " "зворотнього монтування (або не вистача╓ в╕льного простору)" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Автоматична зм╕на розм╕ру FAT не спрацювала: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Обчислюю меж╕ п╕дрозд╕лу Windows" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Зм╕нюю розм╕р" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "п╕дрозд╕л %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Який розм╕р ви хочете залишити для Windows?" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "УВАГА!\n" "\n" "Зараз DrakX потр╕бно зм╕нити розм╕р п╕дрозд╕лу ╕з Windows. Обережно:\n" "ця операц╕я небезпечна. Якщо ви ще цього не зробили, Вам потр╕бно\n" "зараз припиниту установку, скористатися програмою scandisk з Windows\n" "(а кр╕м того, можливо, також дефрагментувати п╕дрозд╕л за допомогою\n" "defrag) на цьому п╕дрозд╕л╕ та зробити резервну коп╕ю Ваших даних.\n" "Коли все це зроблено - натисн╕ть Гаразд." #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "П╕дрозд╕л з Windows на Вашому комп'ютер╕ занадто\n" "фра╜ментований. Виконайте де-фра╜ментац╕ю \n" "спочатку (команда ``defarg'')." #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Програма зм╕ни розм╕ру п╕дрозд╕лу FAT не може працювати з Вашим\n" "п╕дрозд╕лом, при робот╕ сталася така помилка: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Розм╕р якого п╕дрозд╕лу ви хочете зм╕нити?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Використовувати в╕льний прост╕р на п╕дрозд╕л╕ Windows" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Нема╓ п╕дрозд╕лу FAT для зм╕ни розм╕ру або для використання як пристр╕й " "зворотнього монтування (або не вистача╓ в╕льного простору)" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Розм╕р п╕дрозд╕лу для своп╕нгу в Мб: " #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Розм╕р п╕дрозд╕лу root в Мб:" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Вибер╕ть розм╕ри" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Який п╕дрозд╕л ви хочете використати для Linux4Win?" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Використовувати п╕дрозд╕л Windows для зворотнього монтування" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Нема╓ ╕снуючих п╕дрозд╕л╕в для використання" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Користуватися ╕снуючим п╕дрозд╕лом" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" #: ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Використовувати в╕льний прост╕р" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Ви повинн╕ мати FAT п╕дрозд╕л змонтований в /boot/efi " #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Ви не ма╓те п╕дрозд╕лу для своп╕нгу\n" "\n" "Все-таки продовжувати? " #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Ви повинн╕ мати п╕дрозд╕л root.\n" "Для цього створ╕ть новий п╕дрозд╕л (або клацн╕ть на вже\n" "╕снуючому). П╕сля цього вибер╕ть ``Точка монтування'' ╕ встанов╕ть ╖╖\n" "в `/'" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Деяк╕ з апаратних засоб╕в на Вашому комп'ютер╕ вимагають драйвер╕в\n" "ф╕рм-виготовлювач╕в для того, щоб працювати в╕рно. \n" "\n" "Ви можете знайти потр╕бну ╕нформац╕ю про них на: %s" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "В╕тання, установка зак╕нчена. Вийм╕ть з дисковод╕в завантажувальн╕\n" "нос╕╖ ╕ пот╕м натисн╕ть Return для перевантаження системи.\n" "\n" "\n" "Для ╕нформац╕╖ про виправлен╕ помилки знайден╕ в цмй верс╕╖\n" "Mandrake Linux зверн╕ться до розд╕лу Errata на сервер╕\n" "\n" "\n" "%s\n" "\n" "\n" "Дов╕дки про конф╕гурац╕ю Вашо╖ системи приведен╕ в пост-установочному\n" "розд╕л╕ Оф╕ц╕йного Кер╕вництва Користувача Mandrake Linux." #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/91errata.php3" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Будь ласка, уважно прочитайте умови подан╕ дал╕. Якщо ви не\n" "погоджу╓тесь з будь-якою частиною, вам не дозволя╓ться встановлювати\n" "наступний компакт-диск. Натисн╕ть на В╕дмовитися для того, щоб\n" "продовжити установку без використання цього нос╕я.\n" "\n" "Деяк╕ компоненти на наступному компакт-диску не керуються л╕ценз╕╓ю\n" "GPL чи под╕бною до не╖. В такому випадку кожен ╕з компонент╕в\n" "керу╓ться сво╓ю специф╕чною л╕ценз╕╓ю. Будь ласка, прочитайте уважно ╕\n" "дотримуйтесь умов тако╖ специф╕чно╖ л╕ценз╕╖ перш, н╕ж користуватися\n" "або перерозповсюджувати таку компоненту. Так╕ л╕ценз╕╖ у б╕льшост╕\n" "випадк╕в забороняють передачу, коп╕ювання (кр╕м створення резервно╖\n" "коп╕╖), перерозповсюдження, зворотню ╕нженер╕ю, де-асемблювання,\n" "де-комп╕ляц╕ю чи модиф╕кац╕ю компоненти. Будь-яке порушення л╕ценз╕╖\n" "негайно припиня╓ ваш╕ права щодо компоненти. Якщо специф╕чно не\n" "вказано про надання таких прав, ви не ма╓те права встановлювати ц╕\n" "програми на б╕льш, н╕ж одн╕й систем╕, або пристосовувати ╖х для\n" "установки в мереж╕. Якщо ви ма╓те сумн╕ви щодо л╕ценз╕╖, зверн╕ться\n" "безпосередньо до дистриб'ютора чи редактора тако╖ компоненти. Передача\n" "таких компонент (включаючи документац╕ю) трет╕м особам у б╕льшост╕\n" "випадк╕в заборонена. \n" "\n" "Вс╕ авторськ╕ права компонент на наступному компакт-диску застережен╕\n" "за ╖х в╕дпов╕дними авторами ╕ захищаються законами про охорону\n" "авторських прав, як╕ мають право застосовуватися до програмних\n" "продукт╕в.\n" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Вступ\n" "\n" "Операц╕йна система та р╕зноман╕тн╕ компоненти, що маються в\n" "дистрибутив╕ Л╕накс Мандрейк надал╕ мають зватися \"Програмн╕\n" "продукти\". Програмн╕ продукти включають але не обмежуються наборами\n" "програм, метод╕в правил та документац╕╓ю, яка ма╓ в╕дношення до\n" "операц╕йно╖ системи та р╕зноман╕тних складових частин дистрибутива\n" "Л╕накс Мандрейка.\n" "\n" "1. Л╕ценз╕йна угода\n" "\n" "Будь ласка, прочитайте цю угоду уважно. Цей документ ╓ л╕ценз╕йною\n" "угодою м╕ж Вами та MandrakeSoft S.A., яка стосу╓ться програмних\n" "продукт╕в. Встановленням, дублюванням чи використанням Програмних\n" "продукт╕в будь-яким чином, Ви тим самим явно прийма╓те на повн╕стю\n" "погоджу╓тесь з умовами дано╖ Л╕ценз╕╖. Якщо Ви не погоджу╓тесь з\n" "будь-якою частиною Л╕ценз╕йно╖ угоди, Вам не дозволя╓ться\n" "встановлювати, дублювати чи користуватися Програмним\n" "продуктом. Будь-яка спроба встановлення, дублювання чи використання\n" "Програмного продукту чином, який не в╕дпов╕да╓ умовам Угоди визна╓ться\n" "порушенням Угоди ╕, тим самим Ви позбавля╓тесь прав за ц╕╓ю\n" "Угодою. П╕сля припинення д╕╖ ц╕╓╖ Угоди, Ви повинн╕ негайно знищити\n" "вс╕ коп╕╖ Програмних Продукт╕в.\n" "\n" "2. Обмежена гарант╕я\n" "\n" "Програмн╕ продукти та доповнююча документац╕я поставляються \"як ╓\",\n" "без гарант╕╖, в межах встановлених законодавством. Н╕ за яких умов\n" "MandrakeSoft S.A. не буде нести в╕дпов╕дальност╕, в межах встановлених\n" "законодавством, за випадков╕, прям╕ чи опосередкован╕ ( включаючи але\n" "не обмежуючись втратами чи перепинами б╕знесу, ф╕нансовими втратами,\n" "адвокатськими витратами чи штрафами, як результат присуду судово╖\n" "╕нстанц╕╖, чи будь-як╕ ╕нш╕ втрати), що походять в╕д використання,\n" "або, навпаки, в╕д неможливост╕ використання Програмн╕ продукти, нав╕ть\n" "у випадку, якщо MandrakeSoft S.A. пов╕домлялося про можливост╕ таких\n" "втрат.\n" "\n" "ОБМЕЖЕННЯ В╤ДПОВ╤ДАЛЬНОСТ╤, ЗАЛЕЖНО╥ В╤Д ОБЛАДАННЯ АБО ВИКОРИСТАННЯ\n" "ЗАБОРОНЕНИХ ПРОГРАМНИХ ПРОДУКТ╤В В ДЕЯКИХ КРА╥НАХ\n" "\n" "В межах встановлених законодавством, MandrakeSoft S.A. чи його\n" "дистрибютори н╕ за яких умов не несуть в╕дпов╕дальност╕ за жодне\n" "навмисне, випадкове, пряме чи опосередковане пошкодження, (включаючи\n" "але не обмежуючись перешкодами для б╕знесу, припиненням б╕знесу,\n" "ф╕нансовими втратами, адвокатськими витратами чи штрафами, як\n" "результат присуду судово╖ ╕нстанц╕╖, чи будь-якими ╕ншим втратами),\n" "як╕ виникають в╕д обладання чи використання програмних компонент чи\n" "виникають в╕д завантаження заборонених законодавством чи обмежених до\n" "використання в деяких кра╖нах програмних компонент по мереж╕ з одн╕╓╖\n" "з домашн╕х стор╕нок Л╕накс Мандрейк. Ця обмежена в╕дпов╕дальн╕сть\n" "включа╓ також (але не обмежу╓ться) так званими сильними\n" "криптограф╕чними методами, як╕ включен╕ в Програмний продукт.\n" "\n" "3. Л╕ценз╕я GPL та под╕бн╕\n" "\n" "Програмн╕ продукти складаються з компонент, розроблених р╕зними\n" "ф╕зичними чи юридичними особами. Б╕льш╕сть компонент керуються\n" "терм╕нами та умовами загально╖ публ╕чно╖ л╕ценз╕╖ GNU (GNU General\n" "Public Licence), яку ми надал╕ будемо називати в даному документ╕ GPL,\n" "або под╕бними до дано╖ л╕ценз╕ями. Б╕льш╕сть таких л╕ценз╕й Б╕льш╕сть\n" "з цих л╕ценз╕й дозволяють використання, дублювання, прийняття та\n" "перерозповсюдження складових частин, як╕ вони регулюють. Будь-ласка,\n" "ознайомтесь уважно з терм╕нами та умовами л╕ценз╕йних умов для кожно╖\n" "складово╖ частини перш, н╕ж використовувати будь-яку з\n" "частин. Будь-як╕ запитання стосовно л╕ценз╕╖ на окрему складову\n" "частину мають адресуватися автору ц╕╓╖ складово╖ частини, а не до\n" "MandrakeSoft. Програми, розроблен╕ MandrakeSoft S.A. керуються\n" "л╕ценз╕╓ю GPL. Документац╕я, розроблена MandrakeSoft S.A. керу╓ться\n" "спец╕альною л╕ценз╕╓ю. Зверн╕ться, будь-ласка, до документац╕╖ за\n" "подробицями.\n" "\n" "4. Права ╕нтелектуально╖ власност╕\n" "\n" "Вс╕ права на складов╕ компоненти Програмних продукт╕в належать\n" "в╕дпов╕дним авторам ╕ захищен╕ законами про ╕нтелектуальну власн╕сть\n" "та права на коп╕ювання, як╕ мають застосування до програмного\n" "забезпечення. MandrakeSoft S.A. залиша╓ за собою право зм╕нювати чи\n" "адаптувати Програмн╕ продукти як в ц╕лому, так ╕ окремими частинами з\n" "будь-якою метою ╕ для будь-яких ц╕лей. \"Mandrake\", \"Mandrake Linux\" та\n" "в╕дпов╕дн╕ логотипи ╓ торг╕вельними марками MandarakeSoft S.A.\n" "\n" "5. Законодавство\n" "\n" "Якщо будь-який розд╕л ц╕╓╖ угоди признаний нед╕йсним, таким, що не\n" "в╕дпов╕да╓ законодавству чи нев╕дпов╕дним щодо судово╖ постанови, цей\n" "розд╕л угоди видаля╓ться з даного контракту. Ви залиша╓тесь зв'язаними\n" "╕ншими секц╕ями ц╕╓╖ угоди, як╕ ще мають застосування. Терм╕ни та\n" "умови ц╕╓╖ Л╕ценз╕╖ керуються Законодавством Франц╕╖. Вс╕ сп╕рн╕\n" "питання щодо терм╕н╕в та умов ц╕╓╖ л╕ценз╕╖ будуть розв'язуватися по\n" "можливост╕ поза межами судових установ. В крайн╕х випадках сп╕рн╕\n" "питання будуть вир╕шуватися в╕дпов╕дним Законним Судом Парижа -\n" "Франц╕я.\n" "\n" "З будь-якими питаннями щодо цього документа звертайтеся, будь-ласка,\n" "до MandrakeSoft S.A.\n" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Почина╓ться крок `%s'\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Дов╕дка" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "not configured" msgstr "перенастро╖ти" #: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format msgid "Configure" msgstr "Настро╖ти" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Все-таки продовжувати?" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Сталася помилка п╕д час установки пакет╕в: " #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Сталася помилка п╕д час сортування пакет╕в: " #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Зм╕н╕ть компакт-диск!\n" "\n" "Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" "натисн╕ть Гаразд п╕сля цього.\n" "\n" "Якщо ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" "встановлювати з цього диску." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "В╕дкинути" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Прийняти" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Установка пакету %s" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d пакети" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "Подробиц╕" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Подробиц╕" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Зачекайте, ╕де п╕дготовка установки" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Залишок часу " #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Наближене обчислення" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Встановлюю" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Вибер╕ть пакети, як╕ ви хочете встановити" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "М╕н╕мальна установка" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "Зберегти виб╕р пакет╕в" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "Прочитати/записати з/на дискету" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "<- Previous" msgstr "<- Попередн╕й" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Установка" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "Показувати автоматично вибран╕ пакети" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. В╕н повинен бути поновлений." #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Цей пакет повинен бути поновлений\n" "Ви справд╕ хочете в╕дм╕нити його виб╕р?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Цей пакет необх╕дний. Не можна в╕дм╕нити його виб╕р" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Не можна вибрати або в╕дм╕нити виб╕р цього пакету." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Ц╕ пакети будуть де╕нстальованими" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Ц╕ пакети будуть встановленими" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Вибрати цей пакет неможливо. Для його установки не вистача╓ м╕сця." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: %s\n" msgstr "Важлив╕сть: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: %d KB\n" msgstr "Розм╕р: %d КБ\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: %s\n" msgstr "Верс╕я: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Name: %s\n" msgstr "Назва: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Пакети неробоч╕" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Other" msgstr "╤нш╕" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Загальний розм╕р: %d / %d Мб " #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Next ->" msgstr "Дал╕ ->" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "╤ндив╕дульний виб╕р пакет╕в" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Виб╕р груп пакет╕в" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Ваша система ма╓ замало ресурс╕в. Ви можете мати проблеми з установкою\n" "Mandrake Л╕накса. Якщо це станеться, ви можете спробувати установку в\n" "текстовому режим╕. Для цього п╕д час завантаження компакт-диску\n" "натисн╕ть F1 ╕ пот╕м введ╕ть \"text\"." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Зберегти виб╕р пакет╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Автоматизована" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "Повторити" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Якщо потр╕бно, автоматизована установка може бути повн╕стю\n" "автоматично. В цьому випадку установка буде мати повний контроль над\n" "вашим диском!! (Такий тип установки в основному п╕дходить для\n" "установки на ╕нш╕й систем╕)\n" "\n" "Можливо ви захочете повторити установку.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Створення автоустановочно╖ дискети" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Reboot" msgstr "Root" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Деяк╕ кроки не завершен╕.\n" "\n" "Ви д╕йсно хочете припинити зараз?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Створення автоустановочно╖ дискети" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Вставте чисту дискету в дисков╕д %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Можливо вам потр╕бно зм╕нити пристр╕й завантаження у Open Firmware для\n" "того, щоб дозволити роботу завантажувача. Якщо ви не бачите запрошення\n" "завантажувача при завантаженн╕ системи, натисн╕ть Command-Option-O-F\n" "при завантаженн╕ ╕ введ╕ть setenv boot-device %s,\\\\:tbxi. П╕сля\n" "цього надрукуйте shut-down. При наступному завантаженн╕ ви побачите\n" "п╕дказку завантажувача. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "Установка завантажувача неусп╕шна. Сталася помилка:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "Встановлюю блок завантаження" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Помилка при встановленн╕ aboot,\n" "попробувати встановити силою, нав╕ть якщо це розрушить перший п╕дрозд╕л?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "Чи Ви хочете використовувати aboot?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "Зда╓ться у Вас машина OldWorld чи Нев╕дома. Завантажувач yaboot не\n" "буде працювати з ц╕╓ю машиною. Установка буде продовжуватись, але для\n" "завантаження, Вам потр╕бно користуватись BootX." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Встановлюю завантажувальний блок" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Domain Admin User Name" msgstr "Назва домену" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Windows Domain" msgstr "Домен NIS" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Authentication Windows Domain" msgstr "Автентикац╕я LDAP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Server" msgstr "Сервер NIS" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Domain" msgstr "Домен NIS" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication NIS" msgstr "NIS автентикац╕я" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Server" msgstr "Сервер LDAP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Base dn" msgstr "dn на основ╕LDAP " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication LDAP" msgstr "Автентикац╕я LDAP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Local files" msgstr "Локальн╕ файли" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Автентикац╕я" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" #. -PO: keep this short or else the buttons will not fit in the window #: ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Без паролю" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Встановити пароль root'а" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format msgid "Services" msgstr "Сервер" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "System" msgstr "Системний режим" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "Порт" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Bootloader" msgstr "Використовувати завантажувач" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "Root" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "заборонити" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "актив╕зувати зараз" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Firewall" msgstr "Firewall/Маршрутизатор" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Безпека" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Security Level" msgstr "Встановлення р╕вня безпеки" #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Network" msgstr "Мережа:" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "╤нтерфейс мереж╕" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Graphical interface" msgstr "Стартувати X автоматично" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "Телев╕з╕йна плата" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you have an ISA sound card?" msgstr "Чи ви ма╓те ╕нш╕?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Звукова плата" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "В╕ддалений сервер CUPS" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Нема╓ принтера" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Принтер" #: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Миша" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Часовий пояс" #: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Клав╕атура" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Загалом" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "Сервер NTP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Автоматична синхрон╕зац╕я часу (╕з застосуванням NTP)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "Годинник встановлено в GMT (час по ╫р╕нв╕чу)?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Which is your timezone?" msgstr "В як╕й часов╕й смуз╕ Ви знаходитесь?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Чи треба Вам настро╖ти друк?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Неможливо виконати fork: %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Вибер╕ть сервер, з якого звантажити пакети" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "Зв'язуюсь з сервером щоб прочитати список наявних пакет╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Вставте дискету Поновлення Модул╕в в дисков╕д %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Конф╕╜урац╕я п╕сля установки" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Встановлюю пакет %s\n" "%d%%" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "П╕дготовка установки" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Компакт-диск з етикеткою \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Якщо Ви ма╓те вс╕ компакт-диски з поданих вище, натисн╕ть на \"Гаразд\".\n" "Якщо Ви не ма╓те жодного з поданих вище, натисн╕ть на \"В╕дм╕нити\".\n" "Якщо т╕льки деяких компакт-диск╕в не вистача╓, в╕дм╕н╕ть ╖х виб╕р, ╕\n" "натисн╕ть \"Гаразд\" п╕сля цього.\" " #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Все" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "With X" msgstr "Чекайте" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Type of install" msgstr "Вибер╕ть пакет для установки" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Вибраний розм╕р б╕льший за наявний прост╕р" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "Вставте дискету, з записаним списком пакет╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "В╕дновлюю з дискети" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Виб╕р пакет╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Записати на дискету" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "В╕дновити з дискети" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Будь ласка, вибер╕ть запис/завантаження вибору пакет╕в на дискету.\n" "Формат дистети такий-же, як ╕ дискети auto_install." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "У Ваш╕й систем╕ не залишилось достатньо в╕льного м╕сця для установки\n" "чи поновлення (%d > %d )" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Шукаю наявн╕ пакети" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Шукаю пакети для поновлення" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking at packages already installed..." msgstr "Виб╕р цього пакету неможливо в╕дм╕нити. Його вже встановлено." #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Шукаю наявн╕ пакети" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Не вистача╓ своп-пам'ят╕ щоб зак╕нчити установку. Зб╕льш╕ть\n" "╖╖. будь-ласка." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Перев╕ряти зб╕йн╕ блоки?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Для того, щоб таблиця п╕дрозд╕л╕в була актив╕зована, Вам треба\n" "перевантажити систему" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Не вистача╓ в╕льного м╕сця для 1МБ завантажувального блоку! Установка\n" "буде продовжуватись, але для завантаження сво╓╖ системи Вам потр╕бно\n" "буде створити DiskDrake'ом завантажувальний п╕дрозд╕л " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Вибер╕ть точки монтування" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Сканування п╕дрозд╕л╕в для знаходження точок монтування" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No partition available" msgstr "нема╓ п╕дрозд╕л╕в" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "Конф╕гурац╕я IDE" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Конф╕гурую картки PCMCIA..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Емуляц╕я 3 клав╕ш" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "Емуляц╕я 2 клав╕ш" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Емуляц╕я клав╕ш" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Порт миш╕" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your type of mouse." msgstr "Який тип миш╕ ви ма╓те?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "Парол╕ р╕зн╕" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Upgrade %s" msgstr "Поновлення" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Is this an install or an upgrade?" msgstr "Це установка чи поновлення?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "Встановити/Поновити" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "Тут наведено повний список наявних клав╕атур" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your keyboard layout." msgstr "Яка у Вас розкладка клав╕атури?" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakperm:1 ../../standalone/draksplash:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Вих╕д" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Л╕ценз╕йна умова" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "Сталася помилка" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / м╕ж елементами | виб╕р | наступний екран" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Установка Mandrake Linux %s" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Нема╓ привода дискети" #: ../../install_steps.pm:1 #, c-format msgid "Welcome to %s" msgstr "Ласкаво просимо до %s" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Деяк╕ важлив╕ пакети не змогли в╕рно встановитися. Або Ваш\n" "компакт-диск або прив╕д дефектн╕. Перев╕рте компакт диск на\n" "встановленому комп'ютер╕ командою \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Подв╕йн╕ точки монтування %s" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Сталася помилка, але я не знаю, як з нею поводитися.\n" "Продовжуйте на св╕й власний ризик." #: ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Зачекайте, будь-ласка" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 #: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/draksec:1 #, c-format msgid "Ok" msgstr "Гаразд" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Зак╕нчити" #: ../../interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "Basic" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Досв╕дчений" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Remove" msgstr "Видалити принтер" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Зм╕нити" #: ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Додати" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "Вибер╕ть файл" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "Югославська (латинська)" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "В'╓тнамська \"цифровий ряд\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "Клав╕атура США (м╕жнародна)" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "Клав╕атура США" #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "Британська клав╕атура" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Укра╖нська" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Турецька (традиц╕йна \"Q\" модель)" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Турецька (традиц╕йна \"F\" модель)" #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "Таджицька клав╕атура" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Тайська клав╕атура" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tamil (Typewriter-layout)" msgstr "В╕рменська (друкарська машинка)" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "Сербська (кирилиця)" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Словацька (QWERTY)" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Словацька (QWERTZ)" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Словенська" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Шведська" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Yawerty)" msgstr "Рос╕йська (ЯВЕРТИ)" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Рос╕йська" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "Румунська (qwerty)" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "Румунська (qwertz)" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Канадська (Квебек)" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Португальська" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Польська (розкладка qwertz)" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Польська (розкладка qwerty)" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Норвезька" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Датська" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Mongolian (cyrillic)" msgstr "Сербська (кирилиця)" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Македонська" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Латв╕йська" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Литовська \"фонетична\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Литовська \"цифровий ряд\" QWERTY" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Литовська AZERTY (нова)" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Литовська AZERTY (стара)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Laotian" msgstr "Латв╕йська" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Латино-американська" #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "Корейська клав╕атура" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Японська 106 клав╕ш" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "╤тал╕йська" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "╤сландська" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "╤ранська" #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "╤зра╖льська (фонетична)" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "╤зра╖льська" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Хорватська" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Угорська" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Грецька" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Грузинська (латинська розкладка)" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Грузинська (рос╕йська розкладка)" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Французька" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Ф╕нська" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "╤спанська" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Естонська" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Dvorak (Swedish)" msgstr "Дворака (США)" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Дворака (Норвезька)" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Дворака (США)" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Датська" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Н╕мецька (без мертвих клав╕ш)" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Н╕мецька" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Чеська (QWERTY)" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Чеська (QWERTZ)" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Швейцарська (французька розкладка)" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Швейцарська (н╕мецька розкладка)" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Б╕лоруська" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bosnian" msgstr "Естонська" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Браз╕л╕йська (ABNT-2)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (BDS)" msgstr "Болгарська" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (phonetic)" msgstr "В╕рменська (фонетична)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bengali" msgstr "дозволити" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Бельг╕йська" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Азербайджанська (латина)" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "В╕рменська (фонетична)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "В╕рменська (друкарська машинка)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "В╕рменська (стара)" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "Албанська" #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Польська" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Дворака" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "З╕мбабве" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Замб╕я" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "П╕вдена Африка" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Serbia" msgstr "посл╕довний" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Майотт" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "╢мен" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Самоа" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Wallis and Futuna" msgstr "Вал╕с ╕ Футунськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Вануату" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vietnam" msgstr "В'╓тнам" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "В╕рг╕нськ╕ острови (США)" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "В╕рг╕нськ╕ острови (Британ╕я)" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Венесуела" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Св. В╕нсент ╕ Гренад╕нз" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vatican" msgstr "Латв╕йська" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Узбекистан" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Уругвай" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Острови Сполучених Штат╕в Америки" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Уганда" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Укра╖на" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Taiwan" msgstr "Тайланд" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Тувалу" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Тр╕н╕дад та Тобаго" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Турц╕я" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Тонга" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Тун╕с" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Туркмен╕стан" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Сх╕дний Т╕мор" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Токелау" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Таджикистан" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Тайланд" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Того" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Французьк╕ П╕вденн╕ Територ╕╖" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Чад" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Острови Туркс ╕ Кайкос" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Сваз╕ленд" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Syria" msgstr "Сур╕нам" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Ель Сальвадор" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Сан-Томе ╕ Пр╕нс╕п╕" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Сур╕нам" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Сомал╕" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Сенегал" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "Сан Мар╕но" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Сь╓рра-Леоне" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Словак╕я" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Свальбард╕йськ╕ ╕ Ян Майеньск╕ острови" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Словен╕я" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Свята Елена" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "С╕нгапур" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Судан" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Сейшельськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Соломонов╕ острови" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Сауд╕вська Арав╕я" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Руанда" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Russia" msgstr "Рос╕йська" #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Румун╕я" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Рен╕он" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Катар" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Палау" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Парагвай" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Португал╕я" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Palestine" msgstr "Зберегти виб╕р пакет╕в" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "ПуертоР╕ко" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "П╕ткарн" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Св. П'╓р ╕ М╕келон" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Польща" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Пак╕стан" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Ф╕л╕п╕ни" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Папуа Нова Гв╕нея" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Французька Пол╕нез╕я" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Перу" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Панама" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Омен" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Нова Зеланд╕я" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Н╕уе" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Науру" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Непал" #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Н╕карагуа" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Н╕гер╕я" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Норфолкськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Н╕гер" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Нова Каледон╕я" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Нам╕б╕я" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Мозамб╕к" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Малаз╕я" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Мексика" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Малав╕" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Мальд╕ви" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Маврик╕й" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Мальта" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Монсеррат" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Мавритан╕я" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Март╕н╕ка" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "П╕вн╕чн╕ Мар╕анськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Монгол╕я" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Мьянмар" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Мал╕" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Македон╕я" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Маршалов╕ острови" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Мадагаскар" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Молдав╕я" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Монако" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Мароко" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Libya" msgstr "Л╕бер╕я" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Латв╕я" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Люксембур╜" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Литва" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Лесото" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Л╕бер╕я" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Шр╕ Ланка" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Л╕хтенштейн" #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Санта Люч╕я" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Л╕ван" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Казахстан" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Кайманськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Кувейт" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "Ще" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Св. К╕тс ╕ Нев╕с" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Коморськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "К╕р╕бат╕" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Камбоджа" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Киргизстан" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Кен╕я" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Япон╕я" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Jordan" msgstr "Йордан╕я" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Ямайка" #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "╤сланд╕я" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iran" msgstr "╤рак" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "╤рак" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Британська територ╕я в ╤нд╕йському океан╕" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "╤нд╕я" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "╤зра╕ль" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Ireland" msgstr "╤сландська" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "╤ндонез╕я" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Угорщина" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Га╕т╕" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Хорват╕я" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Гондурас" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Heard and McDonald Islands" msgstr "Хердськ╕ ╕ МакДональдськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "Гон╜ Кон╜" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Китай" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "╫аяна" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Гв╕нея-Б╕сау" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "╫уам" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "╫ватемала" #: ../../lang.pm:1 #, fuzzy, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "П╕вдена Джордж╕я ╕ П╕вден╕ Сандв╕чськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Екватор╕альна Гв╕нея" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "╫ваделупа" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "╫в╕нея" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "╫амб╕я" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "╫ренланд╕я" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "╫╕бралтар" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "╫ана" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Французька ╫аяна" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Груз╕я" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "╫ренада" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Об'╓днане Корол╕вство" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "╫абон" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Фарерськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "М╕кронез╕я" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Фолклендськ╕ острови (Мальв╕нськ╕)" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Ф╕дж╕" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Ф╕нлянд╕я" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Еф╕оп╕я" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "╤спан╕я" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Ер╕треа" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Зах╕дна Сахара" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "╢╜ипт" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Естон╕я" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Еквадор" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Алгер╕я" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Дом╕н╕канська республ╕ка" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Дом╕н╕ка" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Дан╕я" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Джибут╕" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "К╕пр" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Р╕здва остр╕в" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Острови Зеленого Мису" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Куба" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Колумб╕я" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Камерун" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Ч╕л╕" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Кука острови" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Кои д'╤вуар" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Швейцар╕я" #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Центральна Африканська Республ╕ка" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Кокосов╕ острови" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Канада" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Бел╕з" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Б╕лорусь" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Ботсвана" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Буве" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Бутан" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Багами" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Бразил╕я" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Бол╕в╕я" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Брунейський Даруссалам" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Бермуди" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Бен╕н" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Бурунд╕" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Бахрейн" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Болгар╕я" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Бурк╕на Фасо" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Бангладеш" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Барбадос" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Босн╕я та Герцеговина" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Азейбаржан" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Аруба" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Australia" msgstr "посл╕довний" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Американська Самоа" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Аргентина" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Антарктика" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Ангола" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Голандськ╕ Антильськ╕ острови" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "В╕рмен╕я" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Албан╕я" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Анг╕лья" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Антигуа та Барбуда" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Об'╓днан╕ Арабськ╕ Ем╕рати" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Андора" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Афган╕стан" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Кругов╕ точки монтування %s\n" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Спочатку з╕тр╕ть лог╕чний том\n" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "ПОСУНЬТЕ КОЛ╤ЩАТКО!" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Щоб актив╕зувати мишку, " #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Випробуйте мишку, будь-ласка" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Без мишки" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "Н╕чого" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "Трьох кнопочна" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "Двох кнопочна" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "Одно кнопочна" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "busmouse" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serial, тип C7)" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "Типу MM" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Типу Logitech CC" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Звичайна 3х кнопочна мишка" #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Звичайна 2х кнопочна мишка" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "посл╕довний" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Кол╕щатко" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Загальне" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Звичайний тип PS2 миш╕ з кол╕щатком" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Стандартний" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Миша Sun" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Перемикнути м╕ж показом по групам ╕ звичайним списком" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Стиснути дерево" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Розширити дерево" #: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "╤нформац╕я" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Все в╕рно?" #: ../../my_gtk.pm:1 #, fuzzy, c-format msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Помилка при запис╕ у файл %s" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Поганий резервний файл" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "В╕дновлення з файлу %s не спрацювало: %s" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "У Вас ╓ пром╕жок в таблиц╕ розд╕л╕в, але я не можу ним скористуватися.\n" "╢диним р╕шенням може бути пересунути Ваш╕ основн╕ п╕дрозд╕ли так, щоб\n" "пром╕жок був поруч з розширеними п╕дрозд╕лами." #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Розширен╕ п╕дрозд╕ли не п╕дтримуються на ц╕й платформ╕." #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "помилка монтування: " #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "можливо" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "гарно" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "дуже гарний" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "важливий" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "потр╕бний" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Недостатньо п╕дрозд╕л╕в для RAID р╕вня %d\n" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "зб╕й у mkraid" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "зб╕й у mkraid (можливо не встановлен╕ raidtools?)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Не можу додати п╕дрозд╕л до _форматованого_ RAID md%d" #: ../../services.pm:1 #, fuzzy, c-format msgid "Stop" msgstr "Сектор" #: ../../services.pm:1 #, fuzzy, c-format msgid "Start" msgstr "Статус" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "При завантаженн╕" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Вибачте, нема╓ додатково╖ \n" "╕нформац╕╖ про цей серв╕с." #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "Серв╕си та демони" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "зупинено" #: ../../services.pm:1 #, c-format msgid "running" msgstr "працюю" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" "Вибер╕ть, як╕ серв╕си мають стартувати автоматично при завантаженн╕ системи" #: ../../services.pm:1 #, fuzzy, c-format msgid "Database Server" msgstr "База даних" #: ../../services.pm:1 #, fuzzy, c-format msgid "Remote Administration" msgstr "Опц╕╖ в╕ддаленого принтера" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "╤нтернет" #: ../../services.pm:1 #, fuzzy, c-format msgid "Printing" msgstr "Друк" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Старту╓ та зупиня╓ сервер шрифт╕в для X (обов'язкове для роботи\n" "сервера XFree)." #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "Завантажити драйвери для пристро╖в usb." #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "syslog - це серв╕с в систем╕, за допомогою якого демони записують\n" "системн╕ пов╕домлення у р╕зн╕ системн╕ файли ре╓страц╕╖ пов╕домлень. В\n" "будь-як╕й систем╕ непогано мати syslog." #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Запуск звуково╖ системи на ваш╕й машин╕" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Протокол rwho вида╓ користувачам на в╕ддалених системах ╕нформац╕ю про\n" "вс╕х користувач╕в заре╓строваних в систем╕, яка ма╓ демон rwho\n" "(под╕бний до демона finger)." #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Протокол rusers да╓ можлив╕сть користувачам в мереж╕ отримувати\n" "╕нформац╕ю про те, хто з користувач╕в заре╓стрований на системах, що\n" "в╕дпов╕дають на запити." #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Протокол rstat да╓ можлив╕сть користувачам в мереж╕ отримувати дан╕\n" "про завантання будь-якого комп'ютера в ц╕й мереж╕." #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Демон routed да╓ можлив╕сть користуватися автоматичним поновленням\n" "таблиц╕ маршрутизац╕╖ IP за допомогою протокола RIP. Протокол RIP\n" "широко використову╓ться на невеликих мережах, в той час, як на б╕льш\n" "складних необх╕дне застосування б╕льш розвинених протокол╕в\n" "маршрутизац╕╖." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Поставити \"сир╕\" файли спец╕альних пристро╖в у в╕дпов╕дн╕сть до\n" "блочних пристро╖в (як, наприклад, п╕дрозд╕ли жорсткого диску) для\n" "використання в програмах под╕бних до Oracle." #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Збер╕га╓ ╕ в╕дновлю╓ джерело ентроп╕╖ в систем╕, тим самим п╕двищуючи\n" "як╕сть ╜енерац╕╖ випадкових чисел." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix - це програма для передач╕ електронно╖ пошти (Mail Transport\n" "Agent), яка переда╓ поштов╕ пов╕домлення в╕д одного комп'ютера до\n" "╕ншого." #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper керу╓ з'╓днаннями з протоколом RPC, як╕ використовуються\n" "такими протоколами, як NFS та NIS. portmaper повинен працювати на\n" "машинах, як╕ ╓ серверами для протокол╕в, що користуються RPC." #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA п╕дтримка потр╕бна в основному для забезпечення роботи таких\n" "речей, як ethernet та модем в переносних комп'ютерах. Пакет не почне\n" "працювати, якщо його не сконф╕╜уровано. Отже, його безпечно\n" "встановлювати на комп'ютерах, нав╕ть якщо в╕н не буде\n" "використовуватися." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "П╕дтримка для OKI 4w ╕ под╕бних win принтер╕в." #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Автоматично включити NumLock на консол╕ ╕ в XFree \n" "при завантаженн╕" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" "комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓\n" "можлив╕сть користування замиканням файл╕в." #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS - це дуже популярний протокол для сп╕льного використання файл╕в на\n" "комп'ютерах, з'╓днаних мережею TCP/IP. Цей серв╕с забезпечу╓ NFS\n" "сервер, який конф╕╜уру╓ться за допомогою файла /etc/exports." #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Актив╕зу╓ та деактив╕зу╓ вс╕ ╕нтерфейси мереж╕, як╕ настро╓н╕\n" "стартувати при завантаженн╕ системи." #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Монту╓ та розмонтову╓ вс╕ файлов╕ системи типу Network File System\n" "(NFS), SMB (Lan Manager/Windows) та NCP (NetWare)." #: ../../services.pm:1 #, fuzzy, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) - це Сервер Назв Домен╕в (Domain Name Server, DNS), який\n" "служить для визначення назв хост╕в за IP адресами та навпаки." #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server використову╓ться для побудови високонад╕йного\n" "сервера з високою продуктивн╕стю." #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd - це демон друку, який забезпечу╓ роботу lpr. Фактично в╕н ╓\n" "сервером, який надсила╓ роботу для друкування на принтер╕." #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf у деяких випадках буде виконувати певн╕ процедури п╕д час\n" "завантаження системи щоб забезпечити п╕дтримання ц╕л╕сност╕\n" "конф╕╜урац╕╖ системи." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" "Автоматичне визначення та конф╕╜урування апаратного забезпечення при\n" "завантаженн╕." #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Автоматичне створення файл╕в заголовк╕в для ядра в каталоз╕ /boot для\n" "/usr/include/linux/{autoconf,version}.h" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Цей пакет завантажу╓ вибрану розкладку клав╕атури, яка встановлю╓ться\n" "в /etc/sysconfig/keyboard. Ця клав╕атура може бути вибрана за\n" "допомогою програми kbdconfig. Краще залишити цей пакет працюючим на\n" "б╕льшост╕ систем." #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Запуска╓ механ╕зм ф╕льтрування пакет╕в для ядра 2.2 Л╕накса, для того\n" "щоб мати захист типу firewall на ваш╕й систем╕." #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Суперсервер демон (б╕льш в╕домий п╕д назвою inetd) служить для запуску\n" "р╕зноман╕тних серв╕с╕в ╤нтернету, коли це необх╕дно. В╕н\n" "в╕дпов╕дальний за старт багатьох серв╕с╕в, таких як telnet, ftp, rsh,\n" "та rlogin. При непрацюючому сервер╕ inetd не будуть також працювати\n" "вс╕ ╕нш╕ серв╕си." #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache - це сервер для World Wide Web. В╕н використову╓ться для надання " "серв╕с╕в\n" "для файл╕в HTML та CGI." #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake викону╓ тестування апаратного забезпечення ╕ якщо потр╕бно\n" "конф╕╜уру╓ нове або зм╕нене апаратне забезпечення." #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM дода╓ п╕дтримку мишки до текстових програм у Л╕накс╕, таких як,\n" "наприклад, Midnight Commander. Дода╓ також можливост╕ \"cut-and-paste\"\n" "до програм, що працюють на консол╕, включаючи п╕дтримку меню на\n" "консол╕." #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron - це стандартна програма UNIX, яка викону╓ вибран╕ користувачем\n" "програми пер╕одично у вибраний час. vixie cron дода╓ до стандартного\n" "UNIX cron к╕лька нових можливостей, включаючи п╕двищену безпеку та\n" "б╕льш потужн╕ конф╕гурац╕йн╕ опц╕╖." #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Викону╓ команди, запланован╕ командою at п╕д час виконання команди at\n" "╕ викону╓ пакетн╕ команди, коли системне навантаження достатньо\n" "низьке. " #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd служить для контролю за р╕внем батаре╖ та запису пов╕домлень про\n" "це у систмний журнал syslog. Кр╕м цього в╕н може вимикати комп'ютер,\n" "коли батарея розрядилася." #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron служить для пер╕одичного виконання команд." #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Запуск звуково╖ системи ALSA (Advanced Linux Sound Architecture)" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "Installing packages..." msgstr "Установка пакету %s" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "[keyboard]" msgstr "Клав╕атура" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Вийти з установки" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Install updates" msgstr "Встановити систему" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Настро╖ти серв╕си" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "Настро╖ти X" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Блок завантаження" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Настро╖ти мережу" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Додати користувача" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Root password" msgstr "Без паролю" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Встановити систему" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Виб╕р пакет╕в" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Форматувати п╕дрозд╕ли" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Partitioning" msgstr "Друк" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Вибер╕ть тип клав╕атури" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Вибер╕ть тип установки" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Визначення типу диску" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Сконф╕гуруйте мишу" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Вибер╕ть мову" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1 #: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "OK" msgstr "Гаразд" #: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../ugtk.pm:1 #, c-format msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (драйвер дисплея для установки)" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" "граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" "РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА." #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" "XFree %s з ЕКСПЕРИМЕНТАЛЬНОЮ п╕дтримкою апаратного прискорення трьохвим╕рно╖ " "граф╕ки" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Ваша в╕деоплата може користуватися апаратним 3D прискоренням граф╕ки\n" "але т╕льки з сервером XFree %s." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s з апаратним прискоренням трьохвим╕рно╖ граф╕ки" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ця в╕деоплата ма╓ п╕дтримку апаратного прискорення трьохвим╕рно╖\n" "граф╕ки, але т╕льки для XFree %s, В╤ДМ╤ТЬТЕ, ЩО ЦЕ ЕКСПЕРИМЕНТАЛЬНИЙ\n" "РЕЖИМ, ЯКИЙ МОЖЕ ПРИВЕСТИ ДО ЗАВИСАННЯ ВАШОГО КОМП'ЮТЕРА. Ваша плата\n" "п╕дтриму╓ться XFree %s, який ма╓ кращу п╕дтримку двовим╕рно╖ граф╕ки." #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ваша в╕деоплата може користуватися апаратним прискоренням\n" "трьохвим╕рно╖ граф╕ки але т╕льки з сервером XFree %s. Ваша в╕деоплата\n" "п╕дтриму╓ться сервером XFree %s, у якому ви можливо матимете кращий\n" "супров╕д для двохвим╕рно╖ граф╕ки." #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree86 %s" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Настро╖ти т╕льки плату \"%s\" (%s)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Користуватися розширенням Xinerama" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Сконф╕╜урувати вс╕ мон╕тори незалежно" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Яку конф╕гурац╕ю XFree ви хочете мати?" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Конф╕╜урац╕я XFree" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Вибер╕ть розм╕р пам'ят╕ Вашо╖ граф╕чно╖ плати" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Ваша система може працювати з к╕лькома мон╕торами.\n" "Що ви хочете настро╖ти?" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Конф╕╜урац╕я з к╕лькома мон╕торами" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Choose an X server" msgstr "Вибер╕ть X сервер" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X сервер" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 Мб чи б╕льше" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 Мб" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 кб" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 кб" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Зберегти зм╕ни?\n" "╤снуюча конф╕гурац╕я:\n" "\n" "%s" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Параметри" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Розд╕льна здатн╕сть" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Мон╕тор" #: ../../Xconfig/main.pm:1 #, fuzzy, c-format msgid "Graphic Card" msgstr "В╕део плата" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Частота вертикально╖ розгортки" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Частота горизонтально╖ розгортки" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Два дуже важливих параметри - це частота вертикально╖ розгортки\n" "(тобто - частота, з якою обновлю╓ться зображення на екран╕), та\n" "найб╕льш важливо - частота горизонтально╖ синхрон╕зац╕╖ (тобто - та\n" "частота, з якою на екран╕ малюються горизонтальн╕ рядки).\n" "\n" "ДУЖЕ ВАЖЛИВО ПАМ'ЯТАТИ, що ви повинн╕ вибрати такий мон╕тор, параметри\n" "якого не перевищують справжн╕х параметр╕в Вашого мон╕тора: ╕накше Ви\n" "можете причинити непоправну шкоду сво╓му мон╕тору. \n" "Якщо ви ма╓те сумн╕ви щодо характеристик свого мон╕тора вибер╕ть певно\n" "г╕рший мон╕тор." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Vendor" msgstr "Назад" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Вибер╕ть тип мон╕тору" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "В╕део плата: %s" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Вибер╕ть розд╕льну здатн╕сть та к╕льк╕сть кольор╕в" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Розд╕льн╕ здатност╕" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 м╕льйярди кольор╕в (32 б╕т)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 м╕льйон╕в кольор╕в (24 б╕т)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 тисяч кольор╕в (16 б╕т)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 тисяч╕ кольор╕в (15 б╕т)" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "265 кольор╕в (8 б╕т)" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Is this the correct setting?" msgstr "Все в╕рно?" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d секунд" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Увага! Тестування ц╕╓╖ граф╕чно╖ плати може призвести до зависання\n" "Вашого комп'ютера." #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Тестування конф╕╜урац╕╖" #: ../../Xconfig/various.pm:1 #, fuzzy, c-format msgid "What norm is your TV using?" msgstr "Який тип з'╓днання ISDN Ви ма╓те?" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Я можу настро╖ти Вашу систему так, що X буде стартувати автоматично\n" "п╕сля завантаження системи.\n" "Чи ви хочете, щоб X стартував автоматично?" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "Стартувати X автоматично" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 драйвер: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "X сервер: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Розд╕льна здатн╕сть: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Глибина кольору: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "В╕део пам'я╕ть: %sкб\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "В╕део плата: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Частота вертикально╖ розгортки мон╕тора: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Горизонтальна синхрон╕зац╕я мон╕тора: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Мон╕тор: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Спец╕альний пристр╕й миш╕: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Тип миш╕: %s\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Розкладка клав╕атури: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Параметри: %s" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Точка монтування: " #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server: " msgstr "Сервер" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Please enter the WebDAV server URL" msgstr "Випробуйте мишку, будь-ласка" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Точка монтування" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Сервер" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Монтувати" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Розмонтувати" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "New" msgstr "новий" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Зам╕сть цього скористайтеся ``%s''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Тип" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Спочатку скористуйтеся ``Розмонтувати''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Delete" msgstr "Стерти" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Створити" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Типи файлових систем:" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Пусто" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Windows" msgstr "Домен NIS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Журнальна файлова система" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "No hard drives found" msgstr "Локальний принтер" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "ви ма╓те один великий дисковий \n" "п╕дрозд╕л типу FAT (який в основному\n" "використову╓ться системами MicroSoft \n" "Dos/Windows). Рекомендовано спершу \n" "зменшити розм╕р цього розд╕лу (клацн╕ть \n" "на ньому, ╕ пот╕м клацн╕ть на \"Зм╕нити розм╕р\")" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Вибер╕ть д╕ю" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Пом╕чник" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Якщо ви збира╓тесь користуватися aboot, не забудьте залишити в╕льний\n" "розд╕л (достатньо 2048 сектор╕в) на початку диску" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Будь-ласка, створ╕ть спочатку резерну коп╕ю Ваших даних" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Читайте уважно!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The encryption keys do not match" msgstr "Парол╕ р╕зн╕" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Цей пароль занадто простий (в╕н повинен бути хоча б %d л╕тер завдовжки)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Filesystem encryption key" msgstr "Тип п╕дрозд╕лу: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Тип: " #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "на шин╕ %d id %d\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Тип таблиц╕ п╕дрозд╕л╕в: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "Диски LVM %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "╤нформац╕я: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геометр╕я: %s цил╕ндр╕в, %s головок, %s сектор╕в\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Розм╕р: %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Пристр╕й: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Це спец╕альний п╕дрозд╕л для \n" "можливост╕ подв╕йного \n" "завантаження системи.\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Можливо цей п╕дрозд╕л ╓ п╕дрозд╕лом\n" "драйвера, вам мабуть не потр╕бно\n" "його зм╕нювати.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Назви файл╕в зворотнього монтування: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "Диски RAID %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Розм╕р д╕лянки %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Р╕вень %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "П╕дрозд╕л, який буде використовуватися для завантаження системи\n" " (для завантаження ДОСу, не для lilo)\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Файл(и) зворотнього монтування: \n" " %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Змонтований\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Не форматований\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Форматований\n" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "В╕д цил╕ндру %d до цил╕ндру %d \n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s сектор╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Розм╕р: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Початок: сектор %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Назва: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Л╕тера в ДОС╕: %s (припущення)\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removing %s" msgstr "Видалення LPD..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Moving files to the new partition" msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hide files" msgstr "зб╕й у mkraid" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Move files to the new partition" msgstr "Недостатньо в╕льного простору для нових п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "П╕сля форматування п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" "будуть втрачен╕" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Щоб зм╕ни почали д╕яти Вам сл╕д перевантажити комп'ютер" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Таблиця п╕дрозд╕л╕в диску %s буде записано на диск" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "Як╕ пакети Ви хочете встановити?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Тип п╕дрозд╕л╕в?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Обережно: ця операц╕я небезпечна." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "розм╕р д╕лянки" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "р╕вень" #: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "device" msgstr "пристр╕й" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Р╕зноман╕тне" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Параметри монтування:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Файл вже ╕сну╓. Користуватися ним?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "File is already used by another loopback, choose another one" msgstr "" "╤нший пристр╕й зворотнього монтування вже користу╓ться цим\n" "файлом. Вибер╕ть ╕нший." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Дайте назву файлу" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Тип п╕дрозд╕лу: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Розм╕р (Мб): " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Назва файлу зворотнього монтування: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Зворотн╓ монтування" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Цей п╕дрозд╕л не може використовуватися для зворотнього монтування" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "Назва LVM?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "новий" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Вибер╕ть ╕снуючий LVM, до якого додати" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Вибер╕ть ╕снуючий RAID, до якого додати" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Перем╕щаю п╕дрозд╕л..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Перем╕щення" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "На який сектор перем╕ститися?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Сектор" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "На який диск ви хочете перем╕ститися?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Перем╕стити" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Новий розм╕р (Мб): " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Вибер╕ть новий розм╕р" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Зм╕нити розм╕р" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "П╕сля зм╕ни розм╕ру п╕дрозд╕лу %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ будуть\n" "втрачен╕" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Потр╕бно зберегти вс╕ дан╕ на цьому п╕дрозд╕л╕" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Розм╕р цього п╕дрозд╕лу неможливо зм╕нити" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Обчислюю меж╕ п╕дрозд╕лу FAT" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "Де ви хочете змонтувати пристр╕й %s?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Не можу зм╕нити точку монтування даного розд╕лу, оск╕льки в╕н\n" "використову╓ться для зворотнього монтування. Спочатку в╕дм╕н╕ть\n" "зворотн╓ монтування." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Де ви хочете змонтувати пристр╕й %s?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Де ви хочете змонтувати файл зворонього монтування %s?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Перемикаюсь з ext2 на ext3" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Яку файлову систему ви вибира╓те?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Зм╕нити тип п╕дрозд╕лу" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "П╕сля зм╕ни типу п╕дрозд╕лу диску %s, вс╕ дан╕ на цьому п╕дрозд╕л╕ \n" "будуть втрачен╕" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Стертифайлу зворотнього монтування?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Установки: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Початок (сектор): " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Створити новий розд╕л" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Використовувати для зворотнього монтування" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Зм╕нити RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Видалити з LVM" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Видалити з RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Додати до LVM" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Додати до RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Форматувати" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Детальна ╕нформац╕я" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Пробую в╕дновити таблицю п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Вставте дискету в дисков╕д\n" "Вс╕ дан╕ на ц╕й дискет╕ будуть втрачен╕" #: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../network/modem.pm:1 #, c-format msgid "Warning" msgstr "Попередження" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Вибер╕ть файл" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Авар╕йна таблиця п╕дрозд╕л╕в ма╓ ╕нший розм╕р\n" "Продовжувати?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "Автоматичне монтування зм╕нних нос╕╖в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Прочитати таблицю п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Авар╕йна таблиця п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "В╕дновити таблицю п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Записати таблицю п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Щоб мати б╕льше п╕дрозд╕л╕в, з╕тр╕ть один ╕з тих, що ╓. П╕сля цього\n" "ви можете створити зам╕сть нього к╕лька розширених п╕дрозд╕л╕в" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Не можу додати жодного п╕дрозд╕лу" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Вс╕ основн╕ п╕дрозд╕ли зайнят╕" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "╤нформац╕я жорсткого диску" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Автоматично розпод╕лити" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Очистити все" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Чи ви хочете записати конф╕╜урац╕ю /etc/fstab?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Вийти без запису таблиц╕ п╕дрозд╕л╕в?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Вийти без запису" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Все-таки продовжувати?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Звичайний > Експерт" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Експерт > Звичайний" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Назад" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Вих╕д" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Вибер╕ть п╕дрозд╕л" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Створити ╕нший п╕дрозд╕л" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Зм╕нити тип" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search servers" msgstr "Сервер DNS" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain" msgstr "Домен NIS" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username" msgstr "╤м'я користувача" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain Authentication Required" msgstr "Автентикац╕я" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Another one" msgstr "╤нтернет" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Which username" msgstr "╤м'я користувача" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Scanner" msgstr "Вибер╕ть граф╕чну плату" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown/Others" msgstr "Загальне" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Modem" msgstr "Модуль" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Ethernetcard" msgstr "Плата Ethernet" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Soundcard" msgstr "Звукова плата" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "╤нш╕" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Tvcard" msgstr "Телев╕з╕йна плата" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "В╕део режим" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Tape" msgstr "Тип" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Disk" msgstr "Датська" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Floppy" msgstr "Записати на дискету" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Driver:" msgstr "Драйвер" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitratry driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Unkown driver" msgstr "Нев╕дома модель" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Зачекайте, будь ласка. Тестування конф╕╜урац╕╖" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Sound configuration" msgstr "Конф╕╜урац╕я" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "PLL setting:" msgstr "форматування" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Tuner type:" msgstr "Зм╕нити тип" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Card model:" msgstr "Пам'ять картки (DMA)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Unknown|Generic" msgstr "Загальне" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Auto-detect" msgstr "Користуватися автовизначенням" #: ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Do" msgstr "Зак╕нчено" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Ваш виб╕р? (рекомендований %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Невдалий виб╕р, спробуйте ще раз\n" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ваш виб╕р? (рекомендований %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Do you want to click on this button?" msgstr "Чи Ви хочете використовувати aboot?" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Параметри: %s" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ваш виб╕р? (рекомендований %s) " #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Завантаження модуля %s неусп╕шне.\n" "Хочете спробувати ╕нш╕ параметри?" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Вкаж╕ть опц╕╖" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Автотест" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "В деяких випадках драйвер %s вимага╓ додатково╖ ╕нформац╕╖ для того,\n" "щоб в╕рно працювати, хоча звичайно працю╓ нормально без не╖. Чи не\n" "хот╕ли б ви вказати додатков╕ опц╕╖ для нього чи дозволити драйверу\n" "випробувати Вашу систему, щоб знайти потр╕бну ╕нформац╕ю? ╤нколи таке\n" "випробовування може привести до зависання комп'ютера, але не повинно\n" "н╕як зашкодити йому." #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Який драйвер %s мен╕ спробувати?" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Опц╕╖ модуля:" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "ви можете тепер використовувати його опц╕╖ в модул╕ %s.\n" "Опц╕╖ мають формат ``назва=величина назва2=величина2 ...''.\n" "Наприклад, ``io=0x300 irq=7''" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(модуль %s)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Встановлюю драйвер для %s плати %s" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Чи ви ма╓те будь-як╕ %s ╕нтерфейси?" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Чи ви ма╓те ╕нш╕?" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Знайден╕ ╕нтерфейси %s %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "comma separated strings" msgstr "Форматувати п╕дрозд╕ли" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "a number" msgstr "Номер телефону" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Найб╕льш поширений спос╕б з'╓днання через adsl - це за допомогою\n" "pppoe. Однак, деяк╕ з'╓днання користуються т╕льки pptp, невелика\n" "к╕льк╕сть користу╓ться dhcp. Якщо Ви не зна╓те напевне вибер╕ть\n" "\"вживати pppoe\"." #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "З'╓днатися з ╕нтернетом" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Alcatel speedtouch usb" msgstr "speedtouch usb" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "користуватися dhcp" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "вживати pptp" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "вживати pppoe" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Other ports" msgstr "Тестую порти" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "Манюс╕нький брандмауер\n" "\n" "Ц╕ установки конф╕╜урують персональний брандмауер (a.k.a. firewall) на\n" "дан╕й машин╕ з Л╕накс Мандрейк. Для того, щоб встановити серйозний\n" "потужний брандмауер, зверн╕ться, будь ласка, до спец╕ал╕зованого\n" "дистрибутива MandrakeSecurity Firewall." #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "No network card" msgstr "не знайдена плата мереж╕" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "POP and IMAP Server" msgstr "Сервер LDAP" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Mail Server" msgstr "База даних" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Domain Name Server" msgstr "Назва домену" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Web Server" msgstr "Сервер" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Назва хоста" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "Назва хоста" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Конф╕гурую мережу" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" "╤нтернетом" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Вибер╕ть ╕нтерфейс мереж╕" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕ ethernet. Не\n" "можна встановити з'╓днання цього типу." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client." msgstr "" "Який dhcp кл╕╓нт Ви хочете використовувати?\n" "Стандартний кл╕╓нт - dhcp-client" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Не знайдено плати ISDN PCI. Вибер╕ть одну ╕з плат у наступному в╕кн╕." #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Знайдена ISDN PCI плата, але нев╕домого типу. Вибер╕ть, будь-ласка, одну з " "плат PCI на наступному екран╕." #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which of the following is your ISDN card?" msgstr "Яка Ваша ISDN плата?" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "Конф╕╜урац╕я ISDN" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "В╕дм╕нити" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Продовжувати" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Якщо Ви ма╓те плату ISA, значення на наступному екран╕ мають бути\n" "коректними.\n" "\n" "Якщо Ви ма╓те плату PCMCIA, Ви повинн╕ знати IRQ та IO Вашо╖ плати.\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Не знаю" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Який тип картки Ви ма╓те" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Який протокол Ви хочете використовувати?" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "Протокол для всього ╕ншого св╕ту" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Протокол для всього ╕ншого св╕ту \n" " без D-каналу (вид╕лених л╕н╕й)" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol" msgstr "╢вропейський протокол" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "╢вропейський протоколь (EDSS1)" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Вибер╕ть свого провайдера.\n" "Якщо його нема╓ в списку, вибер╕ть ╤нший" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Зовн╕шн╕й модем ISDN" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Внутр╕шня плата ISDN" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "Який тип з'╓днання ISDN Ви ма╓те?" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" #: ../../network/isdn.pm:1 #, c-format msgid "Old configuration (isdn4net)" msgstr "Стара конф╕╜урац╕я (isdn4net)" #: ../../network/isdn.pm:1 #, c-format msgid "New configuration (isdn-light)" msgstr "Нова конф╕╜урац╕я (isdn-light)" #: ../../network/isdn.pm:1 #, c-format msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "Яку конф╕╜урац╕ю ISDN Ви бажа╓те встановити?\n" "\n" "* Стара конф╕╜урац╕я використуву╓ isdn4net. Досить потужн╕ засоби\n" "входять до складу пакету, але його досить складно налагодити, ╕ в╕н не\n" "╓ стандартним.\n" "\n" "* Нова конф╕╜урац╕я прост╕ша для розум╕ння, б╕льш стандартизована, але\n" "ма╓ менше ╕нструментар╕ю.\n" "\n" "Ми рекоменду╓мо просту конф╕╜урац╕ю.\n" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Do nothing" msgstr "але не в╕дпов╕да╓" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Install rpm" msgstr "Установка" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Title" msgstr "Таблиця" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "Другий сервер DNS(необов'язково)" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Перший сервер DNS (необов'язково)" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Назва домену" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "За допомогою скрипта" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Через терм╕нал" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "ID користувача" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Номер телефону" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Назва зв'язку" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "Параметри зв'язку по модему" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Конф╕гурац╕я мереж╕" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "П╕сля того, як це зак╕нчено, бажано перевантажити X сервер для того,\n" "щоб позбутися проблеми ╕з зм╕ною назви хоста." #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "В╕та╓мо, конф╕╜урац╕я мереж╕ зак╕нчена.\n" "\n" "Тепер ця конф╕╜урац╕я буде застосована до вашо╖ системи.\n" #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Проблема при перезапуску мереж╕:\n" "\n" "%s" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Як╕ пакети Ви хочете встановити?" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Конф╕гурац╕я мереж╕" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "З'╓днання з тенетами" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Ви настро╖ли к╕лька способ╕в з'╓днання з ╕нформац╕йними тенетами.\n" "Вибер╕ть один ╕з них, яким Ви будете користуватись.\n" "\n" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "Вибер╕ть з'╓днання, яке Ви хочете настро╖ти" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "знайдено плата (и) Ethernet " #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "З'╓днання через локальну мережу" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "Знайдено кабельне з'╓днання" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Кабельне з'╓днання" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected" msgstr "знайдено %s" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "З'╓днання ADSL" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "знайдено %s" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "З'╓днання ISDN" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Winmodem connection" msgstr "Звичайне з'╓днання по модему" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "знайдено на порту %s" #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Звичайне з'╓днання по модему" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Визначаю пристро╖..." #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Expert Mode" msgstr "Експертний режим" #: ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Користуватися автовизначенням" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Вибер╕ть проф╕ль для конф╕гурац╕╖:" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Ласкаво просимо до пом╕чника установки мереж╕.\n" "\n" "Зараз ваша мережа та ╕нтернет з'╓днання будуть настро╓н╕. Якщо ви не\n" "хочете користуватись автоматичним визначенням, в╕дм╕н╕ть виб╕р опц╕╖.\n" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Через те, що ви робите установку по мереж╕, ваша мережа вже\n" "сконф╕╜урована. \n" "\n" "Натисн╕ть на Гаразд щоб зберегти установки мереж╕, або на В╕дм╕нити\n" "для того, щоб зм╕нити установки з'╓днання ╕нтернета ╕ мереж╕.\n" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "Зараз буде сконф╕╜уровано з'╓днання %s.\n" "\n" "\n" "Натисн╕ть \"Гаразд\" для продовдження" #: ../../network/netconnect.pm:1 #, c-format msgid "We are now going to configure the %s connection." msgstr "Зараз буде сконф╕╜уровано з'╓днання %s." #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection & configuration" msgstr "З'╓днання з ╕нтернетом ╕ конф╕гурац╕я" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configure the connection" msgstr "Настро╖ти мережу" #: ../../network/netconnect.pm:1 #, c-format msgid "Disconnect" msgstr "В╕д'╓днатись" #: ../../network/netconnect.pm:1 #, c-format msgid "Connect" msgstr "З'╓днатись" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Ви можете зм╕нити настройки з'╓днання з ╕нтернетом" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can connect to the Internet or reconfigure your connection." msgstr "" "\n" "Ви зараз з'╓днан╕ з ╕нтернетом." #: ../../network/netconnect.pm:1 #, c-format msgid "You are not currently connected to the Internet." msgstr "Ви зараз не з'╓днан╕ з ╕нтернетом." #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Ви можете в╕д'╓днатись або зм╕нити конф╕╜урац╕ю сво╓╖ мереж╕." #: ../../network/netconnect.pm:1 #, c-format msgid "You are currently connected to the Internet." msgstr "З'╓днання з ╕нтернетом встановлено." #: ../../network/network.pm:1 #, fuzzy, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Вигляд URL ма╓ бути http:" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Вигляд прокс╕ ма╓ бути http://..." #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "Прокс╕ FTP" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "Прокс╕ HTTP" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Конф╕╜урац╕я прокс╕" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Шлюзовий пристр╕й" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "Сервер DNS" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Введ╕ть, будь-ласка, назву Вашого хоста. Назва хоста повинна бути\n" "повн╕стю квал╕ф╕кованою назвою хоста, такою, як, наприклад,\n" "``mybox.mylab.myco.com''.\n" "Ви також можете ввести IP адресу шлюза якщо Ви такий ма╓те." #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP адреса ма╓ бути у формат╕ 1.2.3.4" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Start at boot" msgstr "Стартувати при завантаженн╕" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "Випробуйте мишку, будь-ласка" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Конф╕гурац╕я мереж╕" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" "Записати id плати мереж╕ (може знадобиться при користуванн╕ моб╕льним " "комп'ютером)" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DHCP host name" msgstr "Назва хоста" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Маска мереж╕" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP-адреса" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp)" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Автоматична конф╕гурац╕я IP" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (%s драйвер)" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Конф╕гурую пристр╕й мереж╕ %s" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Введ╕ть, будь-ласка, конф╕гурац╕ю IP для ц╕╓╖ машини. Кожен пункт\n" "треба вводити як IP адресу в точково-десятков╕й нотац╕╖ (як,\n" "наприклад, 1.2.3.4)" #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "УВАГА: Цей пристр╕й було попередньо настро╓но для з'╓днання з ╤нтернетом.\n" "\n" "Просто натисн╕ть \"Гаразд\" щоб зберегти конф╕╜урац╕ю пристрою.\n" "Зм╕на пол╕в нижче приведе до зм╕ни конф╕╜урац╕╖ пристрою." #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Увага! Знайдена ╕снуюча конф╕╜урац╕я firewall. Можливо Вам потр╕бно\n" "буде виконати деяк╕ зм╕ни п╕сля установки." #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Знайдено конф╕╜урац╕ю firewall!" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Пароль у провайдера" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Рахунок користувача (╕м'я користувача)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "Затримка перед закриттяс зв'язку (сек)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Швидк╕сть зв'язку" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Режим зв'язку через модем" #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "Вибер╕ть кра╖ну" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "2й DNS провайдера (необов'язково)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "1й DNS провайдера (необов'язково)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Номер телефону провайдера" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Назва провайдера (тобто provider.net)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Ваш особистий номер телефону" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "В/В_1 картки" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "В/В_0 картки" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "В/В картки" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Пам'ять картки (DMA)" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Перепин картки" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Будь-ласка заповн╕ть або вибер╕ть поле внизу" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Конф╕гурац╕я з'╓днання" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Система зда╓ться не п╕дключена до ╕нтернету.\n" "Спробуйте зм╕нити конф╕гурац╕ю свого з'╓днання." #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "For security reasons, it will be disconnected now." msgstr "З точки зору безпеки, ви будете зараз в╕д'╓днан╕." #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "Система з'╓днана з ╕нтернетом." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Випробування з'╓днання..." #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Чи Ви хочете спробувати п╕дключитися до ╕нтернету зараз?" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../partition_table/raw.pm:1 #, fuzzy, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Щось недобре в╕дбува╓ться на вашому диску.\n" "Тестування ц╕л╕сност╕ даних було невдалим.\n" "Це означа╓, що запис будь-чого на диск матиме сумний результат." #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Основна)" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "IP адреса CUPS сервера" #: ../../printer/cups.pm:1 ../../printer/main.pm:1 #, fuzzy, c-format msgid "Remote Printers" msgstr "В╕ддалений принтер" #: ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(на ц╕й машин╕)" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(на %s)" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System (Сп╕льна система друку для Юн╕кс)" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation (нове покол╕ння)" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Unknown Model" msgstr "Нев╕дома модель" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "Нев╕дома модель" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "Порт" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Host %s" msgstr "Назва хоста" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network %s" msgstr "Мережа:" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "╤нтерфейс %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local network(s)" msgstr "не знайдена плата мереж╕" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", printing to %s" msgstr "Помилка при запис╕ у файл %s" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", USB printer" msgstr "Нема╓ принтера" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port \\#%s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printers" msgstr "Локальний принтер" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "Перенаправити роботу по каналу в команду" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "Введ╕ть URI пристрою принтера" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "Принтер на NetWare сервер╕" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network printer (TCP/Socket)" msgstr "Принтер в мереж╕ (сокет)" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "Принтер на в╕ддаленому сервер╕ lpd" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "Принтер на в╕ддаленому сервер╕ CUPS" #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "В╕ддалений принтер" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring applications..." msgstr "Настроюю принтер \"%s\"..." #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printerdrake" msgstr "Друкарка" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Стираю принтер \"%s\" ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Чи Ви хочете видалити принтер \"%s\"?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "Видалити принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "Друк тестових стор╕нок" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Принтер \"%s\" встановлено основним" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "Стандартний принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "Встановити як основний принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Опц╕╖ принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "Виробник принтера, модель" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Виробник принтера, модель, драйвер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Стираю дан╕ старого принтера \"%s\" ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "Назва, опис, розташування принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "Тип з'╓днання принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Raw printer" msgstr "Нема╓ принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "Виконати!" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "Close" msgstr "Закрити" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Принтер %s: %s %s\n" "Що потр╕бно зм╕нити для цього принтера?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "Зм╕нити конф╕гурац╕ю принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add a new printer" msgstr "Додати принтер" #: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Normal Mode" msgstr "Звичайний режим" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Change the printing system" msgstr "Настро╖ти мережу" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS configuration" msgstr "Конф╕╜урац╕я" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Так╕ принтери вже сконф╕╜урован╕.\n" "Ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing system: " msgstr "Система друку: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "Перев╕рка встановленого програмного забезпечення..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing Foomatic..." msgstr "Установка пакету %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Настроюю принтер \"%s\"..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Настроюю принтер \"%s\"..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "Читаю дан╕ принтер╕в ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Яку чергу друку (систему) Ви хочете вживати?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "Вибер╕ть чергу друку для принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "Стандартний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing %s ..." msgstr "Установка пакету %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing %s ..." msgstr "Видалення LPD..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting the printing system at boot time" msgstr "Яку систему друку Ви хочете використовувати?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "paranoid" msgstr "Парано╕дальний" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "high" msgstr "Високий" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting printing system..." msgstr "Яку систему друку Ви хочете використовувати?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuration of a remote printer" msgstr "Настро╖ти принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configure the network now" msgstr "Настро╖ти мережу" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Go on without configuring the network" msgstr "Конф╕гурую мережу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network functionality not configured" msgstr "Мон╕тор не сконф╕╜урований" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting network..." msgstr "Починаю з'╓днання..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "Поновлюю дан╕ принтер╕в ..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Ви перенесли Ваш колишн╕й основний принтер (\"%s\"). Зробити так, щоб\n" "цей принтер залишався основним ╕ в нов╕й систем╕ друку %s?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "Переношу %s ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "Нова назва принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Принтер з назвою \"%s\" вже ╕сну╓.\n" "Ви д╕йсно бажа╓те переписати його конф╕╜урац╕ю?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Назва принтера ма╓ складатися т╕льки з л╕тер, цифр та символа п╕дкреслення." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "Перенести" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Принтер з назвою \"%s\" вже ╕сну╓ в \"%s\". Натисн╕ть \"Перенести\" щоб\n" "переписати його визначення. Ви можете також надрукувати нову назву чи\n" "пропустити цей принтер." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "Не переносити принтери" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Позначте принтери для переносу ╕ натисн╕ть на \"Перенести\"." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Кр╕м того, принтери сконф╕╜урован╕ за допомогою наданих виробниками\n" "файл╕в PPD чи принтери, що мають р╕дн╕ драйвери CUPS не можуть бути\n" "перенесеними." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Додатково, черги не переносяться ц╕╓ю командою ╕ конф╕╜урац╕я\n" "\"foomatic-configure\" не може бути перенесена також." #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD та LPRng не п╕дтримують принтери IPP.\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ п╕дтриму╓ т╕льки локальн╕ принтери, в╕ддален╕ принтери LDP ╕\n" "принтери, що працюють через Socket/TCP.\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS не п╕дтриму╓ друк на принтерах сервер╕в Novell чи принтер╕в, що\n" "передають дан╕ на друк у вигляд╕ команд з дов╕льним синтаксисом.\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Конф╕╜урац╕ю, що була п╕дготована для черги %s Ви можете скоп╕ювати\n" "Для дано╖ установки черги друку (%s). Вс╕ установочн╕ дан╕ (назва\n" "принтера, опис, розташування, тип з'╓днання ╕ стандартн╕ установки)\n" "будуть перенесен╕ на нову конф╕╜урац╕ю. Але роботи з черги перенесено\n" "не буде. Не вс╕ черги можуть бути перенесеними з таких причин: \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Друкую тестову стор╕нку(стор╕нки)..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print option list" msgstr "Опц╕╖ принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Вимикаю мережу" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Вимикаю мережу" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Вимикаю мережу" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Вимикаю мережу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "Спрацювало нормально?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Тестова стор╕нка передана програм╕ друку.\n" "Перед тим, як принтер почне друкувати, можливо пройде\n" "деякий час. Чи в╕н працю╓ коректно?\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Тестова стор╕нка передана програм╕ друку.\n" "Перед тим, як принтер почне друкувати, можливо пройде \n" "деякий час.\n" "Статус друку:\n" "%s\n" "\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do not print any test page" msgstr "Друк тестових стор╕нок" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "Тестова стор╕нка фотограф╕чно╖ якост╕" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "Додаткова тестова стор╕нка (A4)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "Додаткова тестова стор╕нка (Letter)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "Стандартна тестова стор╕нка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "Друк" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "Нема╓ тестових стор╕нок" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Вибер╕ть, будь ласка, стор╕нки для друку\n" "Зауважте: друк фотограф╕чних тестових стор╕нок може бути довгим ╕\n" "лазерн╕ принтери з невеликим об'╓мом пам'ят╕ можуть нав╕ть зовс╕м не\n" "надрукувати таку стор╕нку. У б╕льшост╕ випадк╕д достатньо надрукувати\n" "стандартну пробну стор╕нку." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Тестую стор╕нки" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Встановити принтер \"%s\"\n" "як стандартний?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "Параметр %s виходить за рамки дозволених меж!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "Параметр %s ма╓ бути числом!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "Параметр %s ма╓ бути ц╕лим числом!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer default settings" msgstr "Виб╕р модел╕ принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Стандартн╕ установки принтера \n" "Пересв╕дч╕ться, що розм╕р стор╕нки та тип чорнил (якщо така установка\n" "присутня) встановлен╕ в╕рно. Зауважте, що з швидк╕сть друку з\n" "надзвичайно високою як╕стю може бути значно пов╕льн╕ша." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "OKI winprinter configuration" msgstr "Зм╕нити конф╕гурац╕ю принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "Яку модель принтера Ви ма╓те" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "Виб╕р модел╕ принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Читаю дан╕ принтер╕в ..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select model manually" msgstr "Назва в╕ддаленого принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The model is correct" msgstr "Все в╕рно?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Your printer model" msgstr "Назва в╕ддаленого принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "Готуються дан╕ принтер╕в ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Location" msgstr "Розташування" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Description" msgstr "Опис" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Назва принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Кожному принтеру повинна в╕дпов╕дати назва (наприклад lp).\n" "Поля Опис та Розташування заповнювати необов'язково. Вони ╓\n" "лиш коментарями для користувач╕в." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "Установка пакету %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "Установка пакету %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing HPOJ package..." msgstr "Установка пакету %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " "PhotoSmart or an HP LaserJet 2200?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "A command line must be entered!" msgstr "Потр╕бно ввести коректний URI!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Command line" msgstr "Назва домену" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Pipe into command" msgstr "Перенаправити роботу по каналу в команду" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "знайдено %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "Потр╕бно ввести коректний URI!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "URI пристрою принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Можна вказати безпосередньо URI для доступу до принтера. URI ма╓\n" "в╕дпов╕дати специф╕кац╕ям або CUPS або Foomatic. Зауважте, однак, що\n" "не вс╕ типи URI п╕дтримуються засобами керування черг друку." #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Порт" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP" msgstr "Назва хоста принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "Номер порта ма╓ бути ц╕лим числом!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP missing!" msgstr "Нема╓ назви хоста принтера!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Щоб друкувати на принтер╕ в мереж╕, Вам потр╕бно надати назву хоста\n" "принтера, та можливо номер порта. На серверах HP JetDirect номер порта\n" "у б╕льшост╕ випадк╕в 9100, на ╕нших може\n" "в╕др╕знятись. Проконсультуйтесь з ╕нструкц╕╓ю до апаратного\n" "забезпечення." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "TCP/Socket Printer Options" msgstr "Параметри принтера в мереж╕" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Scanning network..." msgstr "Починаю з'╓днання..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer auto-detection" msgstr "Користуватися автовизначенням" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "Нема╓ назви черги NCP!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "Нема╓ назви сервера NCP!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Назва принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Принтер сервер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Для того, щоб друкувати на NetWare принт-сервер╕, Ви повинн╕\n" "вказати назву принт-сервера (Зауважте! вона може в╕др╕знятися в╕д\n" "TCP/IP ╕мен╕ хоста!) разом з назвою принтера, яким Ви хочете\n" "користуватися та в╕дпов╕дним ╕менем користувача з паролем." #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "Опц╕╖ принтера NetWare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "Нема╓ назви ресурсу samba!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Мають бути вказаними або назва сервера, або його IP адреса!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detected" msgstr "Користуватися автовизначенням" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Робоча група" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Назва ресурсу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "IP адреса SMB сервера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "Назва хоста SMB сервера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Щоб друкувати на SMB принтер╕ Ви ма╓те вказати назву SMB хоста\n" "(В╕дм╕тьте: Вона може в╕др╕знятися в╕д його TCP/IP назви!) ╕ можливо\n" "також IP адресу принт сервера разом з ╕менем серв╕са та будь-яким\n" "╕менем користувача разом з паролем, та робочою групою." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Опц╕╖ SMB (Windows 9x/NT) принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Вимикаю мережу" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "В╕дсутня назва принтера!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "Нема╓ назви в╕ддаленого хоста!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "Назва в╕ддаленого принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "Назва в╕ддаленого хоста" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Щоб використовувати в╕ддалений lpd принтер, Ви ма╓те вказати назву\n" "хоста принт-сервера та назву принтера на цьому хост╕." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Опц╕╖ в╕ддаленого принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Manual configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must choose/enter a printer/device!" msgstr "Введ╕ть URI пристрою принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the port that your printer is connected to." msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "Ц╕ пакети будуть де╕нстальованими" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Available printers" msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No printer found!" msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must enter a device or file name!" msgstr "Введ╕ть URI пристрою принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printer" msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "USB printer \\#%s" msgstr "Нема╓ принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on parallel port \\#%s" msgstr "Назва хоста принтера" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Принтер в мереж╕ (сокет)" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected %s" msgstr "знайдено %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Принтер на сервер╕ SMB/Windows 95/98/NT " #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detect printers connected to this machine" msgstr "В╕ддалений принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and your Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "Настроюю принтер \"%s\"..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Чи Ви хочете в╕дкривати з'╓днання при завантаженн╕ системи?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "Встановити принтер \"%s\"\n" "як стандартний?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "Додати принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and one unknown printer" msgstr "Додати принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Checking your system..." msgstr "Яку систему друку Ви хочете використовувати?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The entered IP is not correct.\n" msgstr "Все в╕рно?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Server IP missing!" msgstr "Нема╓ назви сервера NCP!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Принтер на в╕ддаленому сервер╕ CUPS" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected server" msgstr "Видалити принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Edit selected server" msgstr "знайдено %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "Додати користувача" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "Локальний принтер" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "Видалити принтер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "Автоматична конф╕╜урац╕я CUPS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "Настро╖ти мережу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "Зак╕нчено" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "IP адреса CUPS сервера" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "No remote machines" msgstr "(на ц╕й машин╕)" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Custom configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "Друк" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "Зм╕нити конф╕гурац╕ю принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Для в╕ддаленого сервера CUPS Вам не потр╕бно конф╕╜урувати принтер╕в,\n" "вс╕ принтери будуть автоматично визначен╕. Якщо Ви сумн╕ва╓тесь,\n" "вибер╕ть \"В╕ддалений сервер CUPS\"." #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Як принтер з'╓днаний" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Вибер╕ть з'╓днання принтера" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the user umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (val)\n" "\n" "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (size)\n" "\n" "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for empty passwords, for no password in /etc/shadow and " "for users with the 0 id other than root." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the root umask." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (length, ndigits=0, nupper=0)\n" "\n" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Set the password history length to prevent password reuse." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (max, inactive=-1)\n" "\n" "Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" "\\fP." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (name)\n" "\n" "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enable/Disable sulogin(8) in single user level." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Activate/Disable daily security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable msec hourly security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable IP spoofing protection." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable name resolution spoofing protection. If\n" "\\fIalert\\fP is true, also reports to syslog." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, expr='*.*', dev='tty12')\n" "\n" "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" "expression describing what to log (see syslog.conf(5) for more details) and\n" "dev the device to report the log." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable crontab and at for users. Put allowed users in /etc/cron." "allow and /etc/at.allow\n" "(see man at(1) and crontab(1))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: ()\n" "\n" "If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" "in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" "server\n" "to point to /etc/security/msec/server.. The /etc/security/msec/" "server\n" "is used by chkconfig --add to decide to add a service if it is present in " "the file\n" "during the installation of packages." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " "\\fIarg\\fP = ALL. Only local ones\n" "if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " "services you need, use /etc/hosts.allow\n" "(see hosts.allow(5))." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "The argument specifies if clients are authorized to connect\n" "to the X server on the tcp port 6000 or not." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, listen_tcp=None)\n" "\n" "Allow/Forbid X connections. First arg specifies what is done\n" "on the client side: ALL (all connections are allowed), LOCAL (only\n" "local connection) and NONE (no connection)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid direct root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid reboot by the console user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" "\\fP = NONE no issues are\n" "allowed else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid autologin." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Use libsafe for servers" msgstr "Вибер╕ть параметри для сервера" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Security level" msgstr "Встановлення р╕вня безпеки" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Please choose the desired security level" msgstr "Вибер╕ть р╕вень захисту" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "DrakSec Basic Options" msgstr "Параметри" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Ми вмика╓мо 4 р╕вень безпеки, але тепер система ╓ повн╕стю закритою.\n" "Вс╕ режими безпеки тепер на найвищому р╕вн╕." #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "На цьому р╕вн╕ безпеки систему можна використовувати в якост╕ сервера.\n" "Р╕вень безпеки для ц╕╓╖ системи тепер достатн╕й для того, щоб\n" "використовувати ╖╖ як сервер, що допуска╓ п╕д'╓днання до нього\n" "багатьох кл╕╓нт╕в." #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Це - стандартний р╕вень безпеки, який рекоменду╓ться мати на\n" "комп'ютер╕, п╕дключеному до ╕нтернету в якост╕ кл╕╓нта. Перев╕рки\n" "безпеки тепер вмикнен╕." #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Парол╕ тепер вмикнен╕, але все одно не рекоменду╓ться користуватися\n" "цим комп'ютером в мереж╕." #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Цей р╕вень потр╕бно використовувати з обережн╕стю. В╕н дозволя╓ б╕льш\n" "просте користування Вашою системою, але ╓ надзвичайно ненад╕йним. Не\n" "можна користуватися такою системою, коли вона п╕д'╓днана мережею до\n" "╕нших систем, або до ╕нтернету. Парол╕ не використовуються в ц╕й\n" "систем╕." #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Парано╕дальний" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Higher" msgstr "Високий" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Високий" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Дуже низький" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Зломщики! Ласкаво просимо!" #: ../../standalone/XFdrake:1 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Заре╓струйтеся, будь-ласка, ще раз у %s щоб привести у д╕ю зм╕ни" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" "Будь-ласка, вийд╕ть ╕з системи ╕ пот╕м скористуйтеся Ctrl-Alt-BackSpace" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No floppy drive available!" msgstr "Нема╓ привода дискети" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Please insert floppy disk:" msgstr "Вставте системну дискету, яка вживалася в дисковод╕ %s" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Write Config" msgstr "перенастро╖ти" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Name Servers:" msgstr "Сервер NIS" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Domain Name:" msgstr "Назва домену" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Netmask:" msgstr "Маска мереж╕" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Конф╕гурац╕я..." #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete Client" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Edit Client" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Thin Client" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: %s" msgstr "Тип: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add User -->" msgstr "Додати користувача" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete All NBIs" msgstr "Вибер╕ть файл" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Delete" msgstr "Стерти" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No NIC selected!" msgstr "Нема╓ з'╓днання" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t#type fat;\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Clients" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Users" msgstr "Додати користувача" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Stop Server" msgstr "Сервер NIS" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Start Server" msgstr "Сервер NIS" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Disable Server" msgstr "База даних" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Enable Server" msgstr "База даних" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Remove the last item" msgstr "Стертифайлу зворотнього монтування?" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Add an item" msgstr "Додати користувача" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install" msgstr "Установка" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Дискета створена усп╕шно.\n" "Ви можете повторити установку." #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "В╕тання!" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Creating auto install floppy" msgstr "Створення автоустановочно╖ дискети" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Для кожного кроку, будь ласка, вкаж╕ть чи при повторн╕й установц╕ цей\n" "крок викона╓ться автоматично, чи вручну." #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "Конф╕╜урац╕я крок╕в установки" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "replay" msgstr "Повторити" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Ви можете зараз настро╖ти дискету для автоматизовано╖ устаноки. Цей\n" "режим установки дещо небезпечний ╕ ним треба користуватися\n" "пом╕рковано.\n" "\n" "Користуючись цим режимом Ви можете повторити установку, що Ви\n" "т╕льки-що виконали на дан╕й систем╕. На деяких етапах Вам будуть\n" "задан╕ запитання, щоб зм╕нити значення к╕лькох зм╕нних.\n" "\n" "Для Вашо╖ безпеки, под╕л диску на п╕дрозд╕ли ╕ форматування н╕коли не\n" "буде виконуватись автоматично незалежно в╕д того, що вибрано при\n" "установц╕.\n" "\n" "Хочете продовжувати? " #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "Конф╕╜урац╕я автоматично╖ установки" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "Не можу знайти потр╕бний файл ╕з зображенням `%s'" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Помилка!" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backups will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbackup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include the web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed data afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %%).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000%% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " #> cat .backupignore\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now" msgstr "Установка файл. систем" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "Конф╕╜урац╕я" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "Конф╕гурац╕я мереж╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Конф╕гурац╕я мереж╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "Конф╕гурац╕я мереж╕" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files..." msgstr "Записати в файл" #: ../../standalone/drakbackup:1 #, c-format msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup other files" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup user files" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system files" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to backup..." msgstr "Вибер╕ть, будь-ласка, мову." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select media for backup..." msgstr "Вибер╕ть, будь-ласка, мову." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to restore..." msgstr "Вибер╕ть, будь-ласка, мову." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "Ц╕ пакети будуть встановленими" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Next" msgstr "Текст" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Previous" msgstr "<- Попередн╕й" #: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Save" msgstr "Статус" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Build Backup" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Progress" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Catalog" msgstr "В╕дновити таблицю п╕дрозд╕л╕в" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Custom Restore" msgstr "Спец╕альний" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Failed..." msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hostname required" msgstr "╤м'я хоста:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username required" msgstr "╤м'я користувача" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Password required" msgstr "Пароль" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host Name" msgstr "Назва хоста" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Via Network" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Tape" msgstr "В╕дновити таблицю п╕дрозд╕л╕в" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From CD" msgstr "В╕дновити з дискети" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Change\n" "Restore Path" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "Видалити принтер" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "select path to restore (instead of /)" msgstr "Який тип миш╕ ви ма╓те?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Other" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Users" msgstr "В╕дновити з файлу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore system" msgstr "Встановити систему" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Other Media" msgstr "╤нш╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Select another media to restore from" msgstr "Який тип миш╕ ви ма╓те?" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore from Hard Disk." msgstr "В╕дновити з дискети" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use quota for backup files." msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save:" msgstr "Випробуйте мишку, будь-ласка" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use Hard Disk to backup" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "please choose the date to restore" msgstr "Який тип миш╕ ви ма╓те?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup the system files before:" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Restore Configuration " msgstr "Конф╕гурац╕я мереж╕" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please uncheck or remove it on next time." msgstr "Вибер╕ть до якого посл╕довного порта п╕дключений Ваш модем?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "Параметри" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " on device: %s" msgstr "Спец╕альний пристр╕й миш╕: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system" msgstr "Установка файл. систем" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, c-format msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "across Network" msgstr "Мережа:" #: ../../standalone/drakbackup:1 #, c-format msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "More Options" msgstr "Опц╕╖ модуля:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "When" msgstr "Кол╕щатко" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Where" msgstr "Кол╕щатко" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "What" msgstr "Чекайте" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the\n" "media for backup." msgstr "Вибер╕ть, будь-ласка, мову." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Please choose the time \n" "interval between each backup" msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use daemon" msgstr "╤м'я користувача" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the directory to save to:" msgstr "Випробуйте мишку, будь-ласка" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to eject your tape after the backup." msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your tape before the backup." msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to use the non-rewinding device." msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use tape to backup" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No CD device defined!" msgstr "Вибер╕ть файл" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDRAM device" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using a DVDR device" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Erase Now " msgstr "Перенести" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you want to erase your RW media (1st Session)" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check if you are using CDRW media" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check for multisession CD" msgstr "Клацн╕ть, будь-ласка, на п╕дрозд╕л╕" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose your CD/DVD media size (Mb)" msgstr "Яка у Вас розкладка клав╕атури?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Remember this password" msgstr "ще раз пароль" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your password" msgstr "Будь-ласка, спробуйте ще раз" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter your login" msgstr "Будь-ласка, спробуйте ще раз" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please enter the host name or IP." msgstr "Випробуйте мишку, будь-ласка" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" " Transfer \n" "Now" msgstr "Перенести" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use network connection to backup" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Users" msgstr "╤м'я користувача" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Windows (FAT32)" msgstr "Стерти Windows(TM)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove Selected" msgstr "Видалити принтер" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check all users that you want to include in your backup." msgstr "Вибер╕ть пакети, як╕ Ви хочете встановити" #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup your System files. (/etc directory)" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "File Selection" msgstr "Виб╕р пакет╕в" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Error while sending mail. \n" msgstr "Помилка при читанн╕ файла %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No changes to backup!" msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hard Disk Backup files..." msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Other files..." msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup User files..." msgstr "Поганий резервний файл" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progess" msgstr "Тестую стор╕нки" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "Не можу в╕дкрити %s: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Без паролю" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Установка %s неусп╕шна. Сталася помилка:" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Н╕, мен╕ не потр╕бна автоматична ре╓страц╕я" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" "Так, я хочу автоматично ре╓струватися в систем╕ з цим (╕менем, середовищем)" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Запускати в╕кно X-Window при завантаженн╕" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Системний режим" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Теми" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Splash selection" msgstr "Зберегти виб╕р пакет╕в" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "ви користу╓тесь завантажувачем систем %s.\n" "Клацн╕ть на \"Настро╖ти\" щоб стартувати пом╕чник установки." #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Theme installation failed!" msgstr "Вибер╕ть тип установки" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Notice" msgstr "БезВ╕део" #: ../../standalone/drakboot:1 #, c-format msgid "Relaunch 'lilo'" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Write %s" msgstr "XFree86 %s" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Copy %s to %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Backup %s to %s.old" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Create new theme" msgstr "Створити новий розд╕л" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Install themes" msgstr "Встановити систему" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Режим Lilo/grub" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Режим Yaboot" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Файл/В_их╕д" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_File" msgstr "/Файл" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Конф╕╜урац╕я стилю установки" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "No browser available! Please install one" msgstr "" "Ви можете вибрати також ╕нш╕ мови, як╕ будуть доступн╕ в систем╕ п╕сля\n" "установки" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package not installed" msgstr "Вийти з установки" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Not installed" msgstr "Вийти з установки" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Standalone Tools" msgstr "Засоби для консол╕" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Report" msgstr "порт" #: ../../standalone/drakbug:1 #, c-format msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Release: " msgstr "Зачекайте, будь-ласка" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package: " msgstr "Виб╕р пакет╕в" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Application:" msgstr "Автентикац╕я" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Configuration Wizards" msgstr "Пом╕чник конф╕гурац╕╖ мереж╕" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Userdrake" msgstr "Друкарка" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Software Manager" msgstr "Назва ресурсу" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Remote Control" msgstr "В╕ддалений принтер" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Msec" msgstr "Миша" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Menudrake" msgstr "визначальний" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Online" msgstr "Центр керування" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "First Time Wizard" msgstr "Ласкаво просимо до першого запуску Пом╕чника" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Control Center" msgstr "Центр керування" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Параметри" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "Кл╕╓нт DHCP" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Плата Ethernet" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Шлюз" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Тип зв'язку:" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "Проф╕ль: " #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "Конф╕гурац╕я з'╓днання з ╕нтернетом" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Ви не ма╓те жодного з'╓днання з ╕нтернетом.\n" "Створ╕ть таке з'╓днання клацнувши на \"Настро╖ти\"" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "activate now" msgstr "актив╕зувати зараз" #: ../../standalone/drakconnect:1 #, c-format msgid "deactivate now" msgstr "деактив╕зувати зараз" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "кл╕╓нт DHCP" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Стартувати при завантаженн╕" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "Протокол завантаження" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "Плата %s: %s" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "Конф╕╜урац╕я мереж╕" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "У вас нема╓ жодного сконф╕╜урованого ╕нтерфейса.\n" "Сконф╕╜уруйте ╖х спочатку, клацнувши на \"Настро╖ти\"" #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "З'╓днання..." #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "В╕дключення..." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Нема╓ з'╓днання" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "З'╓днано" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "╤нтерфейс:" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Шлюз:" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Застосувати" #: ../../standalone/drakconnect:1 #, c-format msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Wizard..." msgstr "Пом╕чник..." #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Статус:" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Тип:" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Доступ до ╕нтернету" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "╤м'я хоста:" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Настро╖ти локальну мережу..." #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Статус" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Драйвер" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Протокол" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "╤нтерфейс" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Настро╖ти доступ до ╕нтернету..." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "Назва проф╕лю для створення (новий проф╕ль створю╓ться як коп╕я вже " "╕снуючого):" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "Новий проф╕ль..." #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "Проф╕ль для стирання:" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "Стерти проф╕ль..." #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Конф╕гурац╕я мереж╕ (%d плат)" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk: \n" " %s \n" " %s" msgstr "" "Не можу коректно завершити mkbootdisk: \n" "%s\n" "%s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Неможливо виконати fork: %s" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Нема╓ нос╕я в пристро╖ %s.\n" "Будь ласка, вставте його." #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Пересв╕дч╕ться, що нос╕й вставлений в прив╕д %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Побудувати диск" #: ../../standalone/drakfloppy:1 #, c-format msgid "Output" msgstr "Вих╕д" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Забрати модуль" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Додати модуль" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "пропускати модул╕ scsi" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "якщо потр╕бно" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "пропускати модул╕ raid" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "примусово" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "додатков╕ ар╜ументи для mkinitrd" #: ../../standalone/drakfloppy:1 #, c-format msgid "Expert Area" msgstr "Д╕лянка для експерт╕в" #: ../../standalone/drakfloppy:1 #, c-format msgid "kernel version" msgstr "верс╕я ядра" #: ../../standalone/drakfloppy:1 #, c-format msgid "default" msgstr "стандартний" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Загальн╕" #: ../../standalone/drakfloppy:1 #, c-format msgid "boot disk creation" msgstr "створення завантажувального диску" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Розм╕р" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Назва модуля" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Uninstall" msgstr "Вийти з установки" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove fonts on your system" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Initial tests" msgstr "Пов╕домлення при завантаженн╕" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Install" msgstr "Установка" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Copy fonts on your system" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove List" msgstr "Видалити принтер" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Selected All" msgstr "Вибер╕ть файл" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Install List" msgstr "Встановити систему" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Generic Printers" msgstr "Принтер" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Abiword" msgstr "В╕дм╕нити" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "StarOffice" msgstr "Оф╕сна станц╕я" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "Вибер╕ть п╕дрозд╕ли, як╕ Ви хочете в╕дформатувати" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "About" msgstr "В╕дм╕нити" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Font List" msgstr "Точка монтування" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Advanced Options" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Uninstall Fonts" msgstr "Де╕нсталюю RPM'и" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Import Fonts" msgstr "Форматувати п╕дрозд╕ли" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "done" msgstr "Зак╕нчено" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "xfs restart" msgstr "обмежити" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "П╕дготовка установки" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Fonts copy" msgstr "Форматувати дискету" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "no fonts found" msgstr "Не знайдено %s." #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Ласкаво просимо до програми конф╕╜урац╕╖ сп╕льного користування\n" "з'╓днання з ╕нтернетом\n" "\n" "%s\n" "\n" "Клацн╕ть на \"Настро╖ти\" щоб запустити конф╕╜уратор." #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing configuration" msgstr "Конф╕гурац╕я сп╕льного З'╓днання з ╕нтернетом." #: ../../standalone/drakgw:1 #, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом сконф╕гуровано" #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "" "Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" "на даний час воно дозволено." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "" "Установка сп╕льного користування з'╓днанням з ╕нтернетом вже зроблена,\n" "але на даний момент воно в╕дключено." #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Все сконф╕╜уровано. \n" "\n" "Ви можете сп╕льно користуватися з'╓днанням з ╕нтернетом разом з ╕ншими\n" "комп'ютерами в ваш╕й локальн╕й мереж╕, з використанням автоматичного\n" "конф╕╜урування мереж╕ (DHCP)." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Помилки при установц╕ пакету %s" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Конф╕╜урац╕я скрипт╕в, установка програм, стартування сервер╕в..." #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Конф╕гурац╕я..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "В дан╕й конф╕гурац╕╖ %s знайдено потенц╕йний конфл╕кт адреси мереж╕!\n" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The internal domain name" msgstr "Нова назва принтера" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "IP адреса CUPS сервера" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "(This) DHCP Server IP" msgstr "IP адреса CUPS сервера" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Local Network adress" msgstr "не знайдена плата мереж╕" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Current interface configuration" msgstr "Зм╕нити конф╕гурац╕ю принтера" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Show current interface configuration" msgstr "Зм╕нити конф╕гурац╕ю принтера" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Automatic reconfiguration" msgstr "Автоматична конф╕╜урац╕я CUPS" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Network interface already configured" msgstr "Мон╕тор не сконф╕╜урований" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Вибер╕ть, будь-ласка, який адаптер мереж╕ буде п╕дключено до локально╖\n" "мереж╕." #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "У Ваш╕й систем╕ присутн╕й т╕льки один адаптер мереж╕:\n" "\n" "%s\n" "\n" "Зараз буде встановлена локальна мережа з цим адаптером." #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "╤нтерфейс мереж╕" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "У Ваш╕й систем╕ нема╓ сконф╕╜урованого адаптера мереж╕\n" "ethernet. Скористайтесь, будь-ласка, програмою для конф╕гурац╕╖\n" "апаратних засоб╕в." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "╤нтерфейс %s" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "╤нтерфейс %s (з використанням модуля %s)" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Принтер сервер" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" "встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" "в╕н дозволяв сп╕льне використання свого з'╓днання до\n" "╤нтернету. \n" "\n" "Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" "локальну мережу (LAN)." #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "Сп╕льне використанн з'╓днання з ╕нтернетом" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Вмикаю сервери..." #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "прибрати" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "перенастро╖ти" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "дозволити" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" "зроблена. Сп╕льне користування в даний момент вимкнене.\n" "\n" "Що Ви бажа╓те зробити?" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вимкнене" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "Заборона сервер╕в..." #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "заборонити" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Установка сп╕льного користування з'╓днанням з ╕нтернетом вже\n" "зроблена. Сп╕льне користування в даний момент дозволене.\n" "\n" "Що Ви бажа╓те зробити?" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Сп╕льне користування з'╓днанням з ╕нтернетом вмикнене" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "group :" msgstr "Робоча група" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user :" msgstr "╤м'я користувача" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Path selection" msgstr "Зберегти виб╕р пакет╕в" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Use group id for execution" msgstr "Користуватися автовизначенням" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Use owner id for execution" msgstr "Користуватися автовизначенням" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Property" msgstr "Порт" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Permissions" msgstr "Верс╕я: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Current user" msgstr "Прийняти користувача" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "edit" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Delete selected rule" msgstr "Видалити принтер" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "delete" msgstr "Стерти" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a new rule at the end" msgstr "Додати принтер" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "add a rule" msgstr "Додати модуль" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Down" msgstr "Зак╕нчено" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "permissions" msgstr "п╕дрозд╕л %s" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "group" msgstr "Робоча група" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "user" msgstr "╤м'я користувача" #: ../../standalone/drakperm:1 #, c-format msgid "path" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "Створення автоустановочно╖ дискети" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "Локальний принтер" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Xpmac (драйвер дисплея для установки)" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "╤нтерфейс %s (з використанням модуля %s)" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Вибер╕ть яку плату мереж╕ Ви хочете використати для з'╓днання з\n" "╤нтернетом" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Тепер п╕сля того, як параметри Вашого з'╓днання з ╤нтернетом\n" "встановлен╕, Ви можете скоф╕╜урувати св╕й комп'ютер таким чином, щоб\n" "в╕н дозволяв сп╕льне використання свого з'╓днання до\n" "╤нтернету. \n" "\n" "Прим╕тка: Вам для цього потр╕бно мати плату мереж╕, щоб настро╖ти\n" "локальну мережу (LAN)." #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Конф╕╜урац╕я локально╖ мереж╕" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "Зачекайте, ╕де п╕дготовка установки" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "Встановлення р╕вня безпеки" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "System Options" msgstr "Опц╕╖ модуля:" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Network Options" msgstr "Опц╕╖ модуля:" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Administrator:" msgstr "Опц╕╖ в╕ддаленого принтера" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Alerts:" msgstr "Встановлення р╕вня безпеки" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Level:" msgstr "Встановлення р╕вня безпеки" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (Основна)" #: ../../standalone/draksec:1 #, c-format msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" " should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" " email)" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound:1 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "Нема╓ з'╓днання" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Generating preview ..." msgstr "Визначаю пристро╖..." #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "You must choose an image file first!" msgstr "Введ╕ть URI пристрою принтера" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "ProgressBar color selection" msgstr "Виб╕р модел╕ принтера" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image file" msgstr "Вибер╕ть файл" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "Вибер╕ть файл" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Configure bootsplash picture" msgstr "Настро╖ти серв╕си" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Choose color" msgstr "Вибер╕ть тип мон╕тору" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Save theme" msgstr "Встановити систему" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Preview" msgstr "пристр╕й" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Theme name" msgstr "Назва ресурсу" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "final resolution" msgstr "Розд╕льна здатн╕сть" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "first step creation" msgstr "створення завантажувального диску" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "There was an error while scanning for TV channels" msgstr "Сталася помилка п╕д час установки пакет╕в: " #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "France [SECAM]" msgstr "Франц╕я" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "East Europe" msgstr "╢вропа" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "West Europe" msgstr "╢вропа" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Canada (cable)" msgstr "Канадська (Квебек)" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "secondary" msgstr "%d секунд" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown" msgstr "Нев╕дома модель" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "unknown" msgstr "Нев╕дома модель" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "Стираю принтер \"%s\" ..." #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Configure module" msgstr "Сконф╕гуруйте мишу" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Information" msgstr "Показ ╕нформац╕╖" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detected hardware" msgstr "Перегляньте ╕нформац╕ю про апаратне забезпечення" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Harddrake2 version " msgstr "Визначення типу диску" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detection in progress" msgstr "знайдено на порту %s" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Author:" msgstr "Автотест" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_About..." msgstr "/П╕дказка/Про..." #: ../../standalone/harddrake2:1 #, c-format msgid "/_Report Bug" msgstr "/_R Пов╕домити про помилку" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Select a device !" msgstr "Вибер╕ть граф╕чну плату" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Fields description" msgstr "Опис" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Help" msgstr "/П╕дказка" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Quit" msgstr "Вих╕д" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jazz drives" msgstr "Користуватися автовизначенням" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "Користуватися автовизначенням" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "Користуватися автовизначенням" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Options" msgstr "/Параметри" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "The type of bus on which the mouse is connected" msgstr "Вибер╕ть до якого посл╕довного порту при╓днано мишу?" #: ../../standalone/harddrake2:1 #, c-format msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model stepping" msgstr "форматування" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "network printer port" msgstr "Принтер в мереж╕ (сокет)" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Name" msgstr "Назва: " #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the number of buttons the mouse has" msgstr "Двох кнопочна" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Number of buttons" msgstr "Двох кнопочна" #: ../../standalone/harddrake2:1 #, c-format msgid "Official vendor name of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model name" msgstr "Назва модуля" #: ../../standalone/harddrake2:1 #, c-format msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model" msgstr "Модуль" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "hard disk model" msgstr "Пам'ять картки (DMA)" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Level" msgstr "р╕вень" #: ../../standalone/harddrake2:1 #, c-format msgid "Format of floppies supported by the drive" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Floppy format" msgstr "Форматувати" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Модуль" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "New devfs device" msgstr "Шлюзовий пристр╕й" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Old device file" msgstr "Вибер╕ть файл" #: ../../standalone/harddrake2:1 #, c-format msgid "This field describes the device" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cpuid level" msgstr "Встановлення р╕вня безпеки" #: ../../standalone/harddrake2:1 #, c-format msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cache size" msgstr "розм╕р д╕лянки" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Bus identification" msgstr "Автентикац╕я" #: ../../standalone/harddrake2:1 #, c-format msgid "" "The GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Channel" msgstr "В╕дм╕нити" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Alternative drivers" msgstr "Додаткова тестова стор╕нка (A4)" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Ви хочете щоб BackSpace давав Delete на консол╕?" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Яка у Вас розкладка клав╕атури?" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Не можу стартувати \"живе поновлення\"!!!\n" #: ../../standalone/livedrake:1 #, fuzzy, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Будь-ласка, вставте компакт-диск, позначений \"%s\" у пристр╕й ╕\n" "натисн╕ть Гаразд п╕сля цього.\n" "\n" "Якщо Ви не ма╓те такого диску, натисн╕ть В╕дм╕нити, щоб не\n" "встановлювати з цього диску." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Зм╕н╕ть компакт-диск" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Зберегти як.." #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Please enter your email address below " msgstr "Будь-ласка, спробуйте ще раз" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "alert configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "load setting" msgstr "форматування" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "service setting" msgstr "ц╕каво" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Xinetd Service" msgstr "Принтер сервер" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Webmin Service" msgstr "Сервер" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "SSH Server" msgstr "Сервер NIS" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Samba Server" msgstr "Сервер NIS" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Postfix Mail Server" msgstr "Поштовий сервер postfix, сервер новин inn" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Ftp Server" msgstr "Сервер NIS" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Domain Name Resolver" msgstr "Назва домену" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Ласкаво просимо до конф╕╜урац╕йно╖ програми для прокс╕.\n" "\n" "Тут Ви можете встановити прокс╕ для протокол╕в ftp та http з паролем\n" "чи без. \n" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "будь ласка зажд╕ть, проходження файлу: %s" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Зм╕ст файлу" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Календар" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Вибер╕ть файл" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "але не в╕дпов╕да╓" #: ../../standalone/logdrake:1 #, c-format msgid "matching" msgstr "в╕дпов╕да╓" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Параметри" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "Зас╕б доглядання Ваших журнальних файл╕в" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "пошук" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Syslog" msgstr "syslog" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Messages" msgstr "пов╕домлення" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "User" msgstr "╤м'я користувача" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/П╕дказка/Про..." #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Параметри/Тест" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Файл/-" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Файл/Зм╕нити _назву" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Файл/За_писати" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Файл/_В╕дкрити" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Файл/Новий" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Show only for the selected day" msgstr "Показувати лише для цього дня" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "╤м╕тувавати три кнопки?" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Який тип миш╕ ви ма╓те?" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "З'╓днатись" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnect %s" msgstr "В╕д'╓днатись" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Local measure" msgstr "Локальн╕ файли" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Color configuration" msgstr "Конф╕гурац╕я ╕нтернету" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection complete." msgstr "Швидк╕сть зв'язку" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet complete." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet failed." msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connecting to the Internet " msgstr "З'╓днатися з ╕нтернетом" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnecting from the Internet " msgstr "З'╓днатися з ╕нтернетом" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "Випробування з'╓днання..." #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection Time: " msgstr "Тип зв'язку:" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Sending Speed:" msgstr "Записати в файл" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Profile " msgstr "Проф╕ль: " #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Network Monitoring" msgstr "Конф╕гурац╕я мереж╕" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "Вибер╕ть граф╕чну плату" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Випробуйте мишку, будь-ласка" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "This machine" msgstr "(на ц╕й машин╕)" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "Видалити принтер" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Edit selected host" msgstr "знайдено %s" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "Додати користувача" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "Використовувати в╕льний прост╕р" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "(на ц╕й машин╕)" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "Друк" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for new scanners ..." msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for configured scanners ..." msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing" msgstr "Друк" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "У Ваш╕й систем╕ нема╓ адаптера мереж╕!" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "choose device" msgstr "Пристр╕й завантаження" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "Локальний принтер" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "Користуватися автовизначенням" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "Порт" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "знайдено %s" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "Вибер╕ть граф╕чну плату" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "Чи треба Вам настро╖ти друк?" #: ../../standalone/service_harddrake:1 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "знайдено на порту %s" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.1" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Перен╕с конф╕гурац╕╖ принтер╕в " #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.1: the ultimate development platform" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, fuzzy, c-format msgid "Become a MandrakeExpert" msgstr "експерт" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, fuzzy, c-format msgid "MandrakeExpert Corporate" msgstr "експерт" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Оф╕сна робоча станц╕я" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Програми для оф╕су: текстов╕ процесори (kword, abiword), бухгалтерськ╕\n" "таблиц╕ (kspread, gnumeric), переглядач╕ файл╕в pdf, тощо" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Робоча станц╕я" #: ../../share/compssUsers:999 msgid "Game station" msgstr "╤грова станц╕я" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Програми для розваг: ╕гри-погон╕, ╕гри на дошц╕, стратег╕чн╕, тощо" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Мультимед╕йна станц╕я" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Станц╕я для ╕нтернету" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Наб╕р засоб╕в для прочитання та передач╕ електронно╖ пошти та груп\n" "новин (pine, mutt, tin..) та для перегляду ╕нформац╕йних тенет" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Мережевий Комп'ютер (кл╕╓нт)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Кл╕╓нти для р╕зних протокол╕в (ssh включно)" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Конф╕╜урац╕я" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Засоби для полегшення конф╕╜урування вашого комп'ютера" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Наукова робоча станц╕я" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Засоби для консол╕" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Редактори, командн╕ оболонки, файлов╕ засоби та терм╕нали" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "Робоча станц╕я KDE" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "Робоче середовище K (KDE) - основне граф╕чне середовище з набором\n" "допом╕жних засоб╕в" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Граф╕чне середовище" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Робоча станц╕я Gnome" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Граф╕чне середовище з дружн╕м ╕нтерфейсом та програмами, засоби для\n" "робочого стола" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "╤нш╕ робоч╕ середовища" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, тощо" #: ../../share/compssUsers:999 msgid "Development" msgstr "Розробник" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Б╕бл╕отеки для програмування в C, C++ програми та файли заголовк╕в" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Документац╕я" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Книжки та HOWTO про Л╕накс та в╕льне програмне забезпечення" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Тенета/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 #, fuzzy msgid "Mail" msgstr "Мал╕" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "Поштовий сервер postfix, сервер новин inn" #: ../../share/compssUsers:999 msgid "Database" msgstr "База даних" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "Сервери баз даних PostgreSQL або MySQL " #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Firewall/Маршрутизатор" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "╤нтернет-шлюз" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Сервер ╕мен та мережевий ╕нформац╕йний сервер (DNS, NIS)" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Мережевий комп'ютер (сервер)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Сервер NFS, сервер SMB, прокс╕-сервер, сервер ssh" #: ../../share/compssUsers:999 #, fuzzy msgid "Audio station" msgstr "Мультимед╕йна станц╕я" #: ../../share/compssUsers:999 #, fuzzy msgid "Sound playing/editing programs" msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" #: ../../share/compssUsers:999 #, fuzzy msgid "Video station" msgstr "╤грова станц╕я" #: ../../share/compssUsers:999 #, fuzzy msgid "Video playing programs" msgstr "Звуков╕ та в╕део прогрвач╕ та редактори" #: ../../share/compssUsers:999 #, fuzzy msgid "Graphic station" msgstr "╤грова станц╕я" #: ../../share/compssUsers:999 #, fuzzy msgid "Graphics programs" msgstr "Граф╕чн╕ програми - так╕ як The Gimp" #: ../../share/compssUsers:999 #, fuzzy msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Наб╕р засоб╕в для прочитання та передач╕ електронно╖ пошти та груп\n" "новин (pine, mutt, tin..) та для перегляду ╕нформац╕йних тенет" #, fuzzy #~ msgid "Printer sharing" #~ msgstr "Друк" #~ msgid "Office" #~ msgstr "Оф╕сна станц╕я" #~ msgid "Set of tools for mail, news, web, file transfer, and chat" #~ msgstr "" #~ "Наб╕р засоб╕в для пошти, новин, тенет, передач╕ файл╕в, та \"балачок\"" #~ msgid "Games" #~ msgstr "╤гри" #~ msgid "Multimedia - Graphics" #~ msgstr "Мультимед╕я - граф╕ка" #~ msgid "Multimedia - Sound" #~ msgstr "Мультимед╕я - звук" #~ msgid "Audio-related tools: mp3 or midi players, mixers, etc" #~ msgstr "Звуков╕ засоби: програвач╕ mp3 та midi, м╕кшери, тощо" #~ msgid "Multimedia - Video" #~ msgstr "Мультимед╕я - в╕део" #~ msgid "Video players and editors" #~ msgstr "Програвач╕ в╕део та в╕део-редактори" #~ msgid "Multimedia - CD Burning" #~ msgstr "Мультимед╕я - запис компакт-диск╕в" #~ msgid "Tools to create and burn CD's" #~ msgstr "Засоби для створення та запису компакт-диск╕в" #~ msgid "More Graphical Desktops (Gnome, IceWM)" #~ msgstr "Додатков╕ граф╕чн╕ середовища (Gnome, IceWM)" #~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, тощо" #~ msgid "Personal Information Management" #~ msgstr "Менеджер особисто╖ ╕нформац╕╖" #~ msgid "Tools for your Palm Pilot or your Visor" #~ msgstr "Засоби для Palm Pilot та Visor" #~ msgid "Personal Finance" #~ msgstr "Персональн╕ ф╕нанси" #~ msgid "Programs to manage your finances, such as gnucash" #~ msgstr "Програми для персональних ф╕нансових обрахунк╕в (типу gnucash)" #~ msgid "no network card found" #~ msgstr "не знайдена плата мереж╕" #, fuzzy #~ msgid "Get involved in the Free Software world" #~ msgstr "Протокол для всього ╕ншого св╕ту" #, fuzzy #~ msgid "Get the most from the Internet" #~ msgstr "З'╓днатися з ╕нтернетом" #, fuzzy #~ msgid "User interfaces" #~ msgstr "╤нтерфейс мереж╕" #, fuzzy #~ msgid "Development simplified" #~ msgstr "Розробник" #, fuzzy #~ msgid "" #~ "The following printers are configured. Double-click on a printer to " #~ "change its settings; to make it the default printer; to view information " #~ "about it; or to make a printer on a remote CUPS server available for Star " #~ "Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Так╕ принтери вже сконф╕╜урован╕.\n" #~ "Ви можете або додати ще деяк╕, або зм╕нити т╕, що вже ╕снують." #~ msgid "" #~ "Please enter your host name if you know it.\n" #~ "Some DHCP servers require the hostname to work.\n" #~ "Your host name should be a fully-qualified host name,\n" #~ "such as ``mybox.mylab.myco.com''." #~ msgstr "з" #~ msgid "DrakFloppy Error: %s" #~ msgstr "Помилка DrakFloppy: %s" #~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #~ msgid "Launch Aurora at boot time" #~ msgstr "Вмикати Аврору при завантаженн╕" #~ msgid "Traditional Gtk+ Monitor" #~ msgstr "Традиц╕йний мон╕тор Gtk+" #~ msgid "Traditional Monitor" #~ msgstr "Звичайний мон╕тор" #~ msgid "NewStyle Monitor" #~ msgstr "Мон╕тор нового типу" #~ msgid "NewStyle Categorizing Monitor" #~ msgstr "Категор╕я мон╕тора нового стилю" #, fuzzy #~ msgid "Secure Connection" #~ msgstr "Вибер╕ть з'╓днання принтера" #, fuzzy #~ msgid "FTP Connection" #~ msgstr "З'╓днання через локальну мережу" #~ msgid "Mail/Groupware/News" #~ msgstr "Пошта/ програми для робочих груп/новини" #~ msgid "Postfix mail server, Inn news server" #~ msgstr "Поштовий сервер postfix, сервер новин inn" #~ msgid "/Options" #~ msgstr "/Параметри" #, fuzzy #~ msgid "/Autodetect jazz drives" #~ msgstr "Користуватися автовизначенням" #, fuzzy #~ msgid "/Autodetect modems" #~ msgstr "Користуватися автовизначенням" #, fuzzy #~ msgid "/Autodetect printers" #~ msgstr "Користуватися автовизначенням" #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "П╕дрозд╕л, який ви вибрали щоб додати як кореневий п╕дрозд╕л (/)\n" #~ "ф╕зично розташований поза 1024-м цил╕ндром жорсткого диску. Кр╕м\n" #~ "цього ви не ма╓те вид╕леного п╕дрозд╕лу п╕д директор╕ю /boot. Якщо ви\n" #~ "плану╓те використовувати LILO, не забудьте додати п╕дрозд╕л для /boot" #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "Я не можу створити /boot так в╕ддалено на диску (на цил╕ндр╕, номер\n" #~ "якого > 1024).\n" #~ "Або ви будете користуватися LILO ╕ в╕н не буде працювати, або ви не\n" #~ "будете користуватися LILO, тод╕ Вам не потр╕бна директор╕я /boot" #, fuzzy #~ msgid "Upgrade" #~ msgstr "Поновлення" #, fuzzy #~ msgid "Do you want to configure another printer?" #~ msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #, fuzzy #~ msgid "Know how to use this printer" #~ msgstr "Чи ви хочете випробувати нову конф╕╜урац╕ю?" #, fuzzy #~ msgid "Preparing Printerdrake..." #~ msgstr "Готую PrinterDrake ..." #, fuzzy #~ msgid "Reading printer data ..." #~ msgstr "Читаю дан╕ принтер╕в ..." #~ msgid "" #~ "You must indicate where you wish to place the information required to " #~ "boot\n" #~ "GNU/Linux.\n" #~ "\n" #~ "Unless you know exactly what you are doing, choose \"First sector of " #~ "drive\n" #~ "(MBR)\"." #~ msgstr "" #~ "Ви повинн╕ вказати, де саме ви хочете записати ╕нформац╕ю потр╕бну\n" #~ "для завантаження GNU/Л╕накса.\n" #~ "\n" #~ "\n" #~ "Кр╕м того випадку, коли ви абсолютно впевнен╕ в тому, що ви робите,\n" #~ "вибер╕ть \"Перший сектор диску (MBR)\"." #~ msgid "Please be patient. This operation can take several minutes." #~ msgstr "Потерп╕ть будь-ласка. Це може зайняти к╕лька хвилин." #~ msgid "" #~ "Your new Mandrake Linux operating system is currently being installed.\n" #~ "Depending on the number of packages you will be installing and the speed " #~ "of\n" #~ "your computer, this operation could take from a few minutes to a\n" #~ "significant amount of time.\n" #~ "\n" #~ "Please be patient." #~ msgstr "" #~ "Ваша нова система Мандрейк Л╕накс встановлю╓ться в даний момент. В\n" #~ "залежност╕ в╕д розм╕ру пакет╕в, як╕ ви вибрали для установки та в╕д\n" #~ "швидкост╕ Вашого комп'ютера ця операц╕я може зайняти в╕д к╕лькох\n" #~ "хвилин до в╕дчутного в╕дтинку часу.\n" #~ "\n" #~ "\n" #~ "Потерп╕ть, будь-ласка." #~ msgid "Detecting devices ..." #~ msgstr "Визначаю пристро╖..." #~ msgid "Test ports" #~ msgstr "Тестую порти"