# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# Wachara Chinsettawong <wachara@yahoo.com>, 2001
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-07-27 17:26+0200\n"
"PO-Revision-Date: 2001-09-10 14:24GMT+7\n"
"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
"Language-Team: Thai <th@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.5\n"

#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr ""

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "ลองใหม่"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319
#, c-format
msgid "Reboot"
msgstr ""

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "การคอนฟิก"

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209
#: install_any.pm:1730 install_any.pm:1782 install_steps.pm:81
#: install_steps_interactive.pm:37 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:819 network/netconnect.pm:923
#: network/netconnect.pm:927 network/netconnect.pm:931
#: network/netconnect.pm:936 network/netconnect.pm:1066
#: network/netconnect.pm:1070 network/netconnect.pm:1074
#: network/netconnect.pm:1078 network/netconnect.pm:1186
#: network/netconnect.pm:1191 network/netconnect.pm:1211
#: network/netconnect.pm:1364 network/thirdparty.pm:266
#: network/thirdparty.pm:273 network/thirdparty.pm:309
#: network/thirdparty.pm:311 network/thirdparty.pm:332
#: network/thirdparty.pm:356 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305
#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406
#: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592
#: standalone/drakTermServ:393 standalone/drakTermServ:467
#: standalone/drakTermServ:476 standalone/drakTermServ:771
#: standalone/drakTermServ:778 standalone/drakTermServ:801
#: standalone/drakTermServ:848 standalone/drakTermServ:1056
#: standalone/drakTermServ:1536 standalone/drakTermServ:1552
#: standalone/drakTermServ:1557 standalone/drakTermServ:1565
#: standalone/drakTermServ:1577 standalone/drakTermServ:1598
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1645 standalone/drakbackup:1801
#: standalone/drakbackup:2415 standalone/drakbackup:4104
#: standalone/drakbackup:4324 standalone/drakclock:124
#: standalone/drakconnect:672 standalone/drakconnect:676
#: standalone/drakconnect:681 standalone/drakconnect:696
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakgw:217
#: standalone/drakgw:258 standalone/drakgw:292 standalone/drakgw:394
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:597 standalone/draknfs:604 standalone/draknfs:611
#: standalone/drakroam:41 standalone/draksplash:15 standalone/draksplash:159
#: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168
#: standalone/logdrake:437 standalone/logdrake:442 standalone/net_applet:160
#: standalone/scannerdrake:59 standalone/scannerdrake:202
#: standalone/scannerdrake:261 standalone/scannerdrake:715
#: standalone/scannerdrake:726 standalone/scannerdrake:865
#: standalone/scannerdrake:876 standalone/scannerdrake:946 wizards.pm:95
#: wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "ผิดพลาด"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
"หากทำงานต่ออาจเกิดความเสียหายได้"

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "มีปัญหาเกิดขึ้น"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "ฟอร์แมต loopback file %s"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "ชนิดแฟ้มและโปรแกรมที่ใช้"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1056
#: diskdrake/interactive.pm:1109
#, c-format
msgid "Read carefully!"
msgstr "โปรดอ่านอย่างถี่ถ้วน!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB หรือมากกว่า"

#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X เซิร์ฟเวอร์"

#: Xconfig/card.pm:156
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "เลือก X เซิร์ฟเวอร์"

#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head configuration"

#: Xconfig/card.pm:189
#, fuzzy, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
"คุณต้องการทำอะไร?"

#: Xconfig/card.pm:258
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"

#: Xconfig/card.pm:345
#, c-format
msgid "Xorg configuration"
msgstr "การคอนฟิก Xorg"

#: Xconfig/card.pm:347
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Xorg ชนิดใหนที่คุณต้องการมี"

#: Xconfig/card.pm:380
#, c-format
msgid "Configure all heads independently"
msgstr "Configure all heads independently"

#: Xconfig/card.pm:381
#, c-format
msgid "Use Xinerama extension"
msgstr "Use Xinerama extension"

#: Xconfig/card.pm:386
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"

#: Xconfig/card.pm:398 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:405 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s with 3D hardware acceleration"

#: Xconfig/card.pm:407
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Your card can have 3D hardware acceleration support with Xorg %s."

#: Xconfig/card.pm:413
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s with EXPERIMENTAL 3D hardware acceleration"

#: Xconfig/card.pm:415
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963
#, c-format
msgid "Custom"
msgstr "แบบปรับแก้ได้ (Customized) "

#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:85 install_steps_interactive.pm:1319
#: printer/printerdrake.pm:744 printer/printerdrake.pm:4401
#: printer/printerdrake.pm:4853 standalone/drakhosts:263 standalone/drakids:69
#: standalone/drakids:77 standalone/draksplash:85 standalone/logdrake:173
#: standalone/net_applet:81 standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "ออก"

#: Xconfig/main.pm:117
#, fuzzy, c-format
msgid "Graphic Card"
msgstr "กราฟฟิคการ์ด"

#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "จอภาพ"

#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286
#, c-format
msgid "Resolution"
msgstr "ขนาดจอภาพ"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "ทดสอบ"

#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "อ็อปชั่น"

#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""

#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"เก็บการเปลี่ยนแปลง\n"
"การปรับแต่งปัจจุบัณคือ:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "เลือกจอภาพ"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "เลือกจอภาพ"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr ""

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Generic"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "เวนเดอร์"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "อัตราการรีเฟรชตามแนวนอน"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "อัตราการรีเฟรชตามแนวตั้ง"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 สี (8 บิต)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "สามหมื่นสองพันสี (15 บิต)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "หกหมื่นห้าพันสี (16 บิต)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "สิบหกล้านสี (24 บิต)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "ความละเอียด"

#: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1583 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "อื่นๆ"

#: Xconfig/resolution_and_depth.pm:357
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "เลือกขนาดจอภาพและความละเอียดสี"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Graphics card: %s"
msgstr "กราฟฟิคการ์ด: %s"

#: Xconfig/resolution_and_depth.pm:372 interactive.pm:432
#: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:200 standalone/drakTermServ:518
#: standalone/drakbackup:1347 standalone/drakbackup:3961
#: standalone/drakbackup:4021 standalone/drakbackup:4065
#: standalone/drakconnect:158 standalone/drakconnect:848
#: standalone/drakconnect:935 standalone/drakconnect:1031
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:169 standalone/drakups:212 standalone/net_monitor:340
#: ugtk2.pm:412 ugtk2.pm:510 ugtk2.pm:916 ugtk2.pm:939
#, c-format
msgid "Ok"
msgstr "ตกลง"

#: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:215 standalone/drakbackup:1347
#: standalone/drakbackup:3887 standalone/drakbackup:3891
#: standalone/drakbackup:3949 standalone/drakconnect:157
#: standalone/drakconnect:933 standalone/drakconnect:1030
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:169 standalone/drakups:219 standalone/logdrake:173
#: standalone/net_monitor:339 ugtk2.pm:406 ugtk2.pm:508 ugtk2.pm:517
#: ugtk2.pm:916
#, c-format
msgid "Cancel"
msgstr "ยกเลิก"

#: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527
#: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:285
#: standalone/drakbackup:3883 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:509 standalone/draknfs:208 standalone/drakperm:133
#: standalone/draksec:336 standalone/draksec:338 standalone/draksec:356
#: standalone/draksec:358 ugtk2.pm:1048 ugtk2.pm:1049
#, c-format
msgid "Help"
msgstr "ความช่วยเหลือ"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "ทดสอบการคอนฟิก"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: Xconfig/test.pm:31
#, fuzzy, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d วินาที"

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "ถูกต้องหรือไม่?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "เลือกชนิดของเม้าส์: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "จอภาพ: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "กราฟฟิคการ์ด: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "อความละเอียดสี: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "ความละเอียดของภาพ %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "ไดร์เวอร์ Xorg: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:99
#, fuzzy, c-format
msgid "What norm is your TV using?"
msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"

#: Xconfig/xfree.pm:646
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
#: standalone/service_harddrake:206
#, c-format
msgid "Please wait"
msgstr "โปรดรอสักครู่"

#: any.pm:142
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "การติดตั้ง Bootloader"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"

#: any.pm:232
#, fuzzy, c-format
msgid "First sector of the root partition"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: any.pm:234
#, fuzzy, c-format
msgid "On Floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "ข้ามไป"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "การติดตั้ง LILO/grub"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: any.pm:267 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "Boot Style Configuration"

#: any.pm:269 any.pm:301
#, c-format
msgid "Bootloader main options"
msgstr "อ๊อปชั่นหลักของ Bootloader"

#: any.pm:273
#, c-format
msgid "Give the ram size in MB"
msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"

#: any.pm:275
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"

#: any.pm:276 any.pm:609 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1306
#, c-format
msgid "Please try again"
msgstr "โปรดลองอีกครั้ง"

#: any.pm:281 any.pm:304
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader ที่จะใช้"

#: any.pm:283 any.pm:306
#, c-format
msgid "Boot device"
msgstr "อุปกรณ์บูต"

#: any.pm:285
#, c-format
msgid "Delay before booting default image"
msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"

#: any.pm:286
#, fuzzy, c-format
msgid "Enable ACPI"
msgstr "Enable CD Boot?"

#: any.pm:288
#, c-format
msgid "Force no APIC"
msgstr ""

#: any.pm:290
#, c-format
msgid "Force No Local APIC"
msgstr ""

#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179
#: network/netconnect.pm:573 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1627
#: standalone/drakbackup:3490 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "รหัสผ่าน"

#: any.pm:293 any.pm:644 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "รหัสผ่าน (ใส่อีกครั้ง)"

#: any.pm:294
#, c-format
msgid "Restrict command line options"
msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"

#: any.pm:294
#, c-format
msgid "restrict"
msgstr "จำเพาะ"

#: any.pm:296
#, c-format
msgid "Clean /tmp at each boot"
msgstr "ลบ /tmp ตอน boot ทุกครั้ง"

#: any.pm:297
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"

#: any.pm:305
#, c-format
msgid "Init Message"
msgstr "ข้อความ init"

#: any.pm:307
#, c-format
msgid "Open Firmware Delay"
msgstr "Open Firmware Delay"

#: any.pm:308
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"

#: any.pm:309
#, c-format
msgid "Enable CD Boot?"
msgstr "Enable CD Boot?"

#: any.pm:310
#, c-format
msgid "Enable OF Boot?"
msgstr "Enable OF Boot?"

#: any.pm:311
#, c-format
msgid "Default OS?"
msgstr "Default OS?"

#: any.pm:364
#, c-format
msgid "Image"
msgstr "Image"

#: any.pm:365 any.pm:375
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:366 any.pm:388
#, c-format
msgid "Append"
msgstr "Append"

#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "โหมดของการแสดงผล"

#: any.pm:370
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:371
#, fuzzy, c-format
msgid "Network profile"
msgstr "โปรแกรมค้นหาเครือข่าย"

#: any.pm:380 any.pm:385 any.pm:387
#, c-format
msgid "Label"
msgstr "Label"

#: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Default"

#: any.pm:389
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"

#: any.pm:391
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:402
#, c-format
msgid "Empty label not allowed"
msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"

#: any.pm:403
#, c-format
msgid "You must specify a kernel image"
msgstr ""

#: any.pm:403
#, fuzzy, c-format
msgid "You must specify a root partition"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: any.pm:404
#, c-format
msgid "This label is already used"
msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"

#: any.pm:418
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"

#: any.pm:419
#, c-format
msgid "Linux"
msgstr "ลีนุกซ์"

#: any.pm:419
#, c-format
msgid "Other OS (SunOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"

#: any.pm:420
#, c-format
msgid "Other OS (MacOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"

#: any.pm:420
#, c-format
msgid "Other OS (Windows...)"
msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"

#: any.pm:448
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#: any.pm:595
#, c-format
msgid "access to X programs"
msgstr ""

#: any.pm:596
#, c-format
msgid "access to rpm tools"
msgstr ""

#: any.pm:597
#, c-format
msgid "allow \"su\""
msgstr ""

#: any.pm:598
#, c-format
msgid "access to administrative files"
msgstr ""

#: any.pm:599
#, c-format
msgid "access to network tools"
msgstr ""

#: any.pm:600
#, c-format
msgid "access to compilation tools"
msgstr ""

#: any.pm:605
#, c-format
msgid "(already added %s)"
msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"

#: any.pm:610
#, c-format
msgid "This password is too simple"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"

#: any.pm:611
#, c-format
msgid "Please give a user name"
msgstr "โปรดป้อนชื่อผู้ใช้"

#: any.pm:612
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"

#: any.pm:613
#, c-format
msgid "The user name is too long"
msgstr "ชื่อผู้ใช้ยาวเกินไป"

#: any.pm:614
#, c-format
msgid "This user name has already been added"
msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"

#: any.pm:615 any.pm:646
#, c-format
msgid "User ID"
msgstr "รหัสผู้ใช้"

#: any.pm:616 any.pm:647
#, c-format
msgid "Group ID"
msgstr "รหัสกลุ่ม"

#: any.pm:619
#, c-format
msgid "%s must be a number"
msgstr ""

#: any.pm:620
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:625
#, c-format
msgid "Add user"
msgstr "เพิ่มผู้ใช้"

#: any.pm:626
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ให้ใส่ผู้ใช้\n"
"%s"

#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4853
#: standalone/drakbackup:2703 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "ทำเรียบร้อยแล้ว"

#: any.pm:630 help.pm:51
#, c-format
msgid "Accept user"
msgstr "ยอมรับผู้ใช้"

#: any.pm:641
#, c-format
msgid "Real name"
msgstr "ชื่อเต็ม"

#: any.pm:642 standalone/drakbackup:1622
#, fuzzy, c-format
msgid "Login name"
msgstr "ชื่อโดเมน"

#: any.pm:645
#, c-format
msgid "Shell"
msgstr "เชลล์ที่ใช้"

#: any.pm:649
#, c-format
msgid "Icon"
msgstr "Icon"

#: any.pm:696 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: any.pm:697
#, fuzzy, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"

#: any.pm:698
#, fuzzy, c-format
msgid "Use this feature"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: any.pm:699
#, c-format
msgid "Choose the default user:"
msgstr "เลือกผู้ใช้ default"

#: any.pm:700
#, c-format
msgid "Choose the window manager to run:"
msgstr "เลือก window manager:"

#: any.pm:712 any.pm:779
#, fuzzy, c-format
msgid "Please choose a language to use."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: any.pm:713 any.pm:780
#, fuzzy, c-format
msgid "Language choice"
msgstr "เลือกภาษาที่คุณใช้"

#: any.pm:740
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: any.pm:759 any.pm:788 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: any.pm:760 help.pm:647
#, fuzzy, c-format
msgid "All languages"
msgstr "เลือกภาษาที่คุณใช้"

#: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952
#, fuzzy, c-format
msgid "Country / Region"
msgstr "ขนาดจอภาพ"

#: any.pm:836
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "คุณมีเม้าส์ชนิดใด"

#: any.pm:838
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#: any.pm:839
#, fuzzy, c-format
msgid "Other Countries"
msgstr "กำลังตรวจสอบพอร์ต"

#: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:393
#, c-format
msgid "Advanced"
msgstr "Advanced"

#: any.pm:847
#, c-format
msgid "Input method:"
msgstr ""

#: any.pm:848 install_any.pm:421 network/netconnect.pm:154
#: network/netconnect.pm:314 network/netconnect.pm:319
#: network/netconnect.pm:1177 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "ไม่มี"

#: any.pm:963
#, fuzzy, c-format
msgid "No sharing"
msgstr "ไม่มีเครื่องพิมพ์"

#: any.pm:963
#, fuzzy, c-format
msgid "Allow all users"
msgstr "เพิ่มผู้ใช้"

#: any.pm:967
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: any.pm:979
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:982
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:990
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""

#: any.pm:1015
#, c-format
msgid "Launch userdrake"
msgstr ""

#: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5162 standalone/drakTermServ:295
#: standalone/drakbackup:4083 standalone/drakbug:126 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:118
#: standalone/printerdrake:548
#, c-format
msgid "Close"
msgstr "ปิด"

#: any.pm:1017
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""

#: authentication.pm:23
#, fuzzy, c-format
msgid "Local file"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr ""

#: authentication.pm:25
#, fuzzy, c-format
msgid "NIS"
msgstr "ใช้ NIS"

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr ""

#: authentication.pm:27 authentication.pm:152
#, fuzzy, c-format
msgid "Windows Domain"
msgstr "โดเมน NIS"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr ""

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr ""

#: authentication.pm:55
#, fuzzy, c-format
msgid "Local file:"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง):"

#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr ":"

#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:57
#, fuzzy, c-format
msgid "NIS:"
msgstr "ใช้ NIS:"

#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:58
#, fuzzy, c-format
msgid "Windows Domain:"
msgstr "โดเมน NIS:"

#: authentication.pm:58
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""

#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr ""

#: authentication.pm:59 authentication.pm:60
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""

#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""

#: authentication.pm:85
#, fuzzy, c-format
msgid "Authentication LDAP"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:87 share/compssUsers.pl:102
#, fuzzy, c-format
msgid "LDAP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "ง่าย"

#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""

#: authentication.pm:110 authentication.pm:148
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180
#, c-format
msgid "Domain"
msgstr "โดเมน"

#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:270
#, c-format
msgid "Server"
msgstr "เซิร์ฟเวอร์"

#: authentication.pm:114
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:117
#, fuzzy, c-format
msgid "Password for user"
msgstr "รหัสผ่าน"

#: authentication.pm:118
#, c-format
msgid "Encryption"
msgstr "การเช้ารหัส"

#: authentication.pm:129
#, fuzzy, c-format
msgid "Authentication NIS"
msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"

#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "โดเมน NIS"

#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:148
#, fuzzy, c-format
msgid "Authentication Windows Domain"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:153
#, fuzzy, c-format
msgid "Domain Admin User Name"
msgstr "ชื่อโดเมน"

#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr ""

#: authentication.pm:155
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""

#: authentication.pm:156
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Default"

#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""

#: authentication.pm:171
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "เซ็ตรหัสผ่านรูท"

#: authentication.pm:172 standalone/drakvpn:1111
#, fuzzy, c-format
msgid "Authentication method"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "ไม่มีรหัสผ่าน"

#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"

#: authentication.pm:188 network/netconnect.pm:319 network/netconnect.pm:574
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:753
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""

#: bootloader.pm:853
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO แบบ graphical menu"

#: bootloader.pm:854
#, c-format
msgid "LILO with text menu"
msgstr "LILO แบบ text menu"

#: bootloader.pm:855
#, c-format
msgid "GRUB with graphical menu"
msgstr ""

#: bootloader.pm:856
#, c-format
msgid "GRUB with text menu"
msgstr ""

#: bootloader.pm:857
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:935
#, c-format
msgid "not enough room in /boot"
msgstr "ไม่มีที่พอใน /boot"

#: bootloader.pm:1414
#, fuzzy, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"

#: bootloader.pm:1448
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1461
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1462
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d นาที"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 นาที"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d วินาที"

#: common.pm:253
#, c-format
msgid "kdesu missing"
msgstr "ไม่มี kdesu "

#: common.pm:256
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "ออสเตรีย"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "ออสเตรเลีย"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "เบลเยียม"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "บราซิล"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "แคนาดา"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr ""

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "คอสตาริกา"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "สาธารณรัฐเช็ค"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "เยอรมนี"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr ""

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, fuzzy, c-format
msgid "Estonia"
msgstr "Estonian"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "สเปน"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "ฟินแลนด์"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "ฝรั่งเศส"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "กรืซ"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, fuzzy, c-format
msgid "Hungary"
msgstr "อังการี"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "Ireland"
msgstr "ไอซ์แลนด์"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "อิสราเอล"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "อิตาลี"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "ญี่ปุ่น"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "เนเธอร์แลนด์"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "นอร์เวย์"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr ""

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "โปแลนด๋"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "โปรตุเกส"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "รัสเซีย"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "สวีเดน"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, fuzzy, c-format
msgid "Slovakia"
msgstr "สโลวาเนีย"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr ""

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "ไต้หวัน"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr ""

#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "สหรัฐอเมริกา"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "ใหม่"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "เลิกเม้าท์์ระบบไฟล์"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "เม้าท์"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "กำหนดจุดเม้าท์"

#: diskdrake/dav.pm:83
#, fuzzy, c-format
msgid "Please enter the WebDAV server URL"
msgstr "กรุณาทดสอบเม้าส์"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "เซิร์ฟเวอร์: "

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1266
#, c-format
msgid "Mount point: "
msgstr "จุดเม้าท์: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1273
#, fuzzy, c-format
msgid "Options: %s"
msgstr "พาร์ติชั่น %s"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "กรุณาทำ backup ก่อน"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
"ด้านหน้าของ disk"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Wizard"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "เลือกกิจกรรม"

#: diskdrake/hd_gtk.pm:189
#, fuzzy, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
"(กดที่มันแล้วกด \"ปรับขนาด\")"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "โปรดเลือกพาร์ติชั่น"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr "รายละเอียด"

#: diskdrake/hd_gtk.pm:251
#, fuzzy, c-format
msgid "No hard drives found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, fuzzy, c-format
msgid "Journalised FS"
msgstr "การเม้าท์ล้มเหลว"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "สวอป"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "หน้าต่าง"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1203
#, c-format
msgid "Empty"
msgstr "ว่าง"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "ประเภทของระบบไฟล์:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "ใช้ ``%s'' แทน"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "สร้าง"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "ประเภท"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:236
#, c-format
msgid "Delete"
msgstr "ลบ"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "ใช้ ``Unmount'' ก่อน"

#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose another partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose a partition"
msgstr "เลือกกิจกรรม"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "เลิกทำงาน"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "ยกเลิก"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "ปกติ > สำหรับผู้ชำนาญ"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "ออกโดยไม่ต้องบันทึก"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:285
#, fuzzy, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "ล้างทั้งหมด"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "กำหนดแบบอัตโนมัติ"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:121
#, c-format
msgid "More"
msgstr "More"

#: diskdrake/interactive.pm:317
#, fuzzy, c-format
msgid "Hard drive information"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
"พาร์ติชั่นแบบ extended ได้"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""

#: diskdrake/interactive.pm:368 help.pm:530
#, fuzzy, c-format
msgid "Save partition table"
msgstr "บันทึกตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:369 help.pm:530
#, fuzzy, c-format
msgid "Restore partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:372 help.pm:530
#, fuzzy, c-format
msgid "Reload partition table"
msgstr "กู้ตารางพาร์ติชั่น"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr ""

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "เลือกไฟล์"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
"ต้องการทำต่อหรือไม่?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"

#: diskdrake/interactive.pm:434
#, fuzzy, c-format
msgid "Detailed information"
msgstr "แสดงข้อมูล"

#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "เปลี่ยนขนาด"

#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "ฟอร์แมต"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "เพิ่มให้ RAID"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "เพิ่มให้ LVM"

#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "ลบออกจาก RAID"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "ลบออกจาก LVM"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "แก้ไข RAID"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "ใช้สำหรับ loopback"

#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "สร้างพาร์ติชั่นใหม่"

#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "เริ่มเซ็กเตอร์: "

#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:926
#, c-format
msgid "Size in MB: "
msgstr "ขนาดเป็น MB: "

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:927
#, c-format
msgid "Filesystem type: "
msgstr "ประเภทของระบบไฟล์: "

#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "ข้อกำหนด: "

#: diskdrake/interactive.pm:528
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: diskdrake/interactive.pm:588
#, fuzzy, c-format
msgid "Remove the loopback file?"
msgstr "ฟอร์แมต loopback file %s"

#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "คุณต้องการเลือก filesystem ใด"

#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr ""

#: diskdrake/interactive.pm:657
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"

#: diskdrake/interactive.pm:688
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "ปรับขนาด"

#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "คำนวณขอบเขตของระบบไฟล์"

#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"

#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"

#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"

#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "เลือกขนาดใหม่"

#: diskdrake/interactive.pm:761
#, fuzzy, c-format
msgid "New size in MB: "
msgstr "ขนาดเป็น MB: "

#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:840
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"

#: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859
#, c-format
msgid "new"
msgstr "ใหม่"

#: diskdrake/interactive.pm:857
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"

#: diskdrake/interactive.pm:863
#, c-format
msgid "LVM name?"
msgstr "ชื่อ LVM"

#: diskdrake/interactive.pm:891
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:893
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:911
#, c-format
msgid "This partition can not be used for loopback"
msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"

#: diskdrake/interactive.pm:924
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:925
#, c-format
msgid "Loopback file name: "
msgstr "ชื่อ Loopback file: "

#: diskdrake/interactive.pm:930
#, fuzzy, c-format
msgid "Give a file name"
msgstr "ชื่อเต็ม"

#: diskdrake/interactive.pm:933
#, fuzzy, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "File already used by another loopback, choose another one"

#: diskdrake/interactive.pm:934
#, c-format
msgid "File already exists. Use it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"

#: diskdrake/interactive.pm:957
#, fuzzy, c-format
msgid "Mount options"
msgstr "อ๊อปชั่นของโมดูล:"

#: diskdrake/interactive.pm:964
#, c-format
msgid "Various"
msgstr ""

#: diskdrake/interactive.pm:1028
#, c-format
msgid "device"
msgstr "อุปกรณ์"

#: diskdrake/interactive.pm:1029
#, c-format
msgid "level"
msgstr "ระดับ"

#: diskdrake/interactive.pm:1030
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "ขนาดของ chunk"

#: diskdrake/interactive.pm:1047
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "ระวัง การทำงานนี้อันตราย"

#: diskdrake/interactive.pm:1062
#, c-format
msgid "What type of partitioning?"
msgstr "การทำ partitioning ชนิดใด?"

#: diskdrake/interactive.pm:1100
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"

#: diskdrake/interactive.pm:1109
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"

#: diskdrake/interactive.pm:1118
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"

#: diskdrake/interactive.pm:1134
#, fuzzy, c-format
msgid "Move files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: diskdrake/interactive.pm:1134
#, fuzzy, c-format
msgid "Hide files"
msgstr "mkraid failed"

#: diskdrake/interactive.pm:1135
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: diskdrake/interactive.pm:1146
#, fuzzy, c-format
msgid "Moving files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: diskdrake/interactive.pm:1150
#, c-format
msgid "Copying %s"
msgstr ""

#: diskdrake/interactive.pm:1154
#, fuzzy, c-format
msgid "Removing %s"
msgstr "ความละเอียดของภาพ %s\n"

#: diskdrake/interactive.pm:1168
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: diskdrake/interactive.pm:1169
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""

#: diskdrake/interactive.pm:1189 diskdrake/interactive.pm:1251
#, c-format
msgid "Device: "
msgstr "อุปกรณ์: "

#: diskdrake/interactive.pm:1190
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "ชื่อโฮสต์:"

#: diskdrake/interactive.pm:1191
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1192
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"

#: diskdrake/interactive.pm:1196 diskdrake/interactive.pm:1205
#: diskdrake/interactive.pm:1269
#, c-format
msgid "Type: "
msgstr "ประเภท: "

#: diskdrake/interactive.pm:1200 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "ชื่อ: "

#: diskdrake/interactive.pm:1207
#, c-format
msgid "Start: sector %s\n"
msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"

#: diskdrake/interactive.pm:1208
#, c-format
msgid "Size: %s"
msgstr "ขนาด: %s"

#: diskdrake/interactive.pm:1210
#, c-format
msgid ", %s sectors"
msgstr ", %s เซ็กเตอร์"

#: diskdrake/interactive.pm:1212
#, fuzzy, c-format
msgid "Cylinder %d to %d\n"
msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"

#: diskdrake/interactive.pm:1213
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1214
#, c-format
msgid "Formatted\n"
msgstr "ฟอร์แมต\n"

#: diskdrake/interactive.pm:1215
#, c-format
msgid "Not formatted\n"
msgstr "ยังไม่ได้ฟอร์แมต\n"

#: diskdrake/interactive.pm:1216
#, c-format
msgid "Mounted\n"
msgstr "เม้าท์\n"

#: diskdrake/interactive.pm:1217
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1222
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Loopback file(s): %s\n"

#: diskdrake/interactive.pm:1223
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
"    (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"

#: diskdrake/interactive.pm:1225
#, c-format
msgid "Level %s\n"
msgstr "ระดับ %s\n"

#: diskdrake/interactive.pm:1226
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "ขนาดของ Chunk %s\n"

#: diskdrake/interactive.pm:1227
#, c-format
msgid "RAID-disks %s\n"
msgstr "ดิสก์แบบ RAID %s\n"

#: diskdrake/interactive.pm:1229
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback file name: %s"

#: diskdrake/interactive.pm:1232
#, fuzzy, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
"ปล่อยมันทิ้งไว้แบบนี้\n"

#: diskdrake/interactive.pm:1235
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"

#: diskdrake/interactive.pm:1252
#, c-format
msgid "Read-only"
msgstr "อ่านได้อย่างเดียว"

#: diskdrake/interactive.pm:1253
#, c-format
msgid "Size: %s\n"
msgstr "ขนาด: %s\n"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "Info: "
msgstr "ข้อมูล: "

#: diskdrake/interactive.pm:1256
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disks %s\n"

#: diskdrake/interactive.pm:1257
#, c-format
msgid "Partition table type: %s\n"
msgstr "ชนิดตารางพาร์ติชั่น: %s\n"

#: diskdrake/interactive.pm:1258
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "บนบัส %d id %d\n"

#: diskdrake/interactive.pm:1301
#, fuzzy, c-format
msgid "Filesystem encryption key"
msgstr "ประเภทของระบบไฟล์: "

#: diskdrake/interactive.pm:1302
#, c-format
msgid "Choose your filesystem encryption key"
msgstr ""

#: diskdrake/interactive.pm:1305
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"

#: diskdrake/interactive.pm:1306
#, fuzzy, c-format
msgid "The encryption keys do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: diskdrake/interactive.pm:1309 network/netconnect.pm:1022
#: standalone/drakconnect:419
#, c-format
msgid "Encryption key"
msgstr ""

#: diskdrake/interactive.pm:1310
#, c-format
msgid "Encryption key (again)"
msgstr ""

#: diskdrake/interactive.pm:1311 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: diskdrake/removable.pm:46
#, fuzzy, c-format
msgid "Change type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: diskdrake/smbnfs_gtk.pm:162
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175
#, fuzzy, c-format
msgid "Domain Authentication Required"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: diskdrake/smbnfs_gtk.pm:167
#, fuzzy, c-format
msgid "Which username"
msgstr "ชื่อผู้ใช้"

#: diskdrake/smbnfs_gtk.pm:167
#, fuzzy, c-format
msgid "Another one"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "ชื่อผู้ใช้"

#: diskdrake/smbnfs_gtk.pm:204
#, fuzzy, c-format
msgid "Search servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: diskdrake/smbnfs_gtk.pm:209
#, fuzzy, c-format
msgid "Search new servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: do_pkgs.pm:16 do_pkgs.pm:31
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""

#: do_pkgs.pm:182
#, fuzzy, c-format
msgid "Installing packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: do_pkgs.pm:227
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "ความละเอียดของภาพ %s\n"

#: fs/format.pm:57 fs/format.pm:64
#, c-format
msgid "Formatting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fs/format.pm:61
#, c-format
msgid "Creating and formatting file %s"
msgstr "กำลังสร้างและ format ไฟล์ %s"

#: fs/format.pm:114
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"

#: fs/format.pm:119 fs/format.pm:121
#, c-format
msgid "%s formatting of %s failed"
msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Circular mounts %s\n"

#: fs/mount.pm:72
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fs/mount.pm:73
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: fs/mount.pm:78 fs/mount.pm:95
#, fuzzy, c-format
msgid "Checking %s"
msgstr "ความละเอียดของภาพ %s\n"

#: fs/mount.pm:111 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"

#: fs/mount.pm:140
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"

#: fs/mount_options.pm:111
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:113
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:116
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:119
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:121
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:129
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs/mount_options.pm:131
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs/mount_options.pm:135
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs/mount_options.pm:141
#, c-format
msgid ""
"Enable user disk quota accounting enabled, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs/type.pm:375
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"

#: fs/type.pm:376
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr ""

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "เซิร์ฟเวอร์"

#: fsedit.pm:210
#, fuzzy, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
"ข้อความผิดพลาดคือ %s\n"
"\n"
"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"

#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"

#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""

#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"

#: fsedit.pm:385
#, fuzzy, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"

#: fsedit.pm:390
#, c-format
msgid ""
"You can not use a LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""

#: fsedit.pm:392
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""

#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "This directory should remain within the root filesystem"

#: fsedit.pm:400 fsedit.pm:402
#, fuzzy, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"

#: fsedit.pm:404
#, fuzzy, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"

#: fsedit.pm:465
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"

#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr ""

#: harddrake/data.pm:62 install_any.pm:1665
#, c-format
msgid "Floppy"
msgstr "ฟล้อปปี้"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "ซิปไดร์ฟ"

#: harddrake/data.pm:88 install_any.pm:1666
#, fuzzy, c-format
msgid "Hard Disk"
msgstr "เดนมาร์ก"

#: harddrake/data.pm:97 install_any.pm:1667
#, c-format
msgid "CDROM"
msgstr ""

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr ""

#: harddrake/data.pm:117
#, fuzzy, c-format
msgid "DVD-ROM"
msgstr "ซีดี-รอม"

#: harddrake/data.pm:127 standalone/drakbackup:2036
#, fuzzy, c-format
msgid "Tape"
msgstr "ประเภท"

#: harddrake/data.pm:136
#, fuzzy, c-format
msgid "Videocard"
msgstr "โหมดของการแสดงผล"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""

#: harddrake/data.pm:154
#, fuzzy, c-format
msgid "Tvcard"
msgstr "TV card"

#: harddrake/data.pm:163
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "อื่นๆ"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "การ์ดเสียง"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr ""

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr ""

#: harddrake/data.pm:209
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Internal ISDN card"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""

#: harddrake/data.pm:265
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "Ethernet Card"

#: harddrake/data.pm:282 network/netconnect.pm:488
#, c-format
msgid "Modem"
msgstr "โมเด็ม"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "หน่วยความจำ"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr ""

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:984
#, c-format
msgid "Printer"
msgstr "เครื่องพิมพ์"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Joystick"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr ""

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr ""

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr ""

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr ""

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr ""

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr ""

#: harddrake/data.pm:420
#, fuzzy, c-format
msgid "USB ports"
msgstr "ไม่มีเครื่องพิมพ์"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr ""

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117
#: install_steps_interactive.pm:944 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "คีย์บอร์ด"

#: harddrake/data.pm:460
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977
#, c-format
msgid "Mouse"
msgstr "Mouse"

#: harddrake/data.pm:483
#, fuzzy, c-format
msgid "UPS"
msgstr "HFS"

#: harddrake/data.pm:492
#, fuzzy, c-format
msgid "Scanner"
msgstr "เลือกกราฟฟิคการ์ด"

#: harddrake/data.pm:502 standalone/harddrake2:442
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "Generic"

#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr ""

#: harddrake/sound.pm:190 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "กรุณารอสักครู่ ..."

#: harddrake/sound.pm:226
#, c-format
msgid "No alternative driver"
msgstr ""

#: harddrake/sound.pm:227
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:233
#, fuzzy, c-format
msgid "Sound configuration"
msgstr "การปรับแต่ง LAN"

#: harddrake/sound.pm:235
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:240
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:242
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146
#, fuzzy, c-format
msgid "Driver:"
msgstr "Driver"

#: harddrake/sound.pm:261
#, c-format
msgid "Trouble shooting"
msgstr ""

#: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078
#: network/ndiswrapper.pm:95 network/netconnect.pm:467
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310
#: standalone/drakTermServ:326 standalone/drakTermServ:1169
#: standalone/drakTermServ:1230 standalone/drakTermServ:1895
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:969 standalone/drakups:27
#: standalone/harddrake2:480 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "คำเตือน"

#: harddrake/sound.pm:269
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:277
#, c-format
msgid "No open source driver"
msgstr ""

#: harddrake/sound.pm:278
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""

#: harddrake/sound.pm:281
#, c-format
msgid "No known driver"
msgstr ""

#: harddrake/sound.pm:282
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: harddrake/sound.pm:286
#, c-format
msgid "Unknown driver"
msgstr ""

#: harddrake/sound.pm:287
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""

#: harddrake/sound.pm:301
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:304
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:330
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: harddrake/sound.pm:333
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:336
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:12 standalone/net_applet:63 standalone/net_applet:64
#: standalone/net_applet:66
#, c-format
msgid "Auto-detect"
msgstr "ตรวจสอบอัตโนมัติ"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, fuzzy, c-format
msgid "Unknown|Generic"
msgstr "Generic"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:392
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: harddrake/v4l.pm:395
#, fuzzy, c-format
msgid "Card model:"
msgstr "Card mem (DMA)"

#: harddrake/v4l.pm:396
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: harddrake/v4l.pm:397
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: harddrake/v4l.pm:397
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:399
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "ฟอร์แมต"

#: harddrake/v4l.pm:400
#, c-format
msgid "Radio support:"
msgstr ""

#: harddrake/v4l.pm:400
#, c-format
msgid "enable radio support"
msgstr ""

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""

#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "ยอมรับ"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "ชื่อผู้ใช้"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321
#: network/thirdparty.pm:322 printer/printerdrake.pm:3678
#: standalone/drakTermServ:383 standalone/drakbackup:3940
#: standalone/drakbackup:4034 standalone/drakbackup:4051
#: standalone/drakbackup:4069 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Next"

#: help.pm:51
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""

#: help.pm:146 share/compssUsers.pl:24
#, fuzzy, c-format
msgid "Workstation"
msgstr "Workstation ที่ทำงาน"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "การทำงานแบบกราฟฟิก"

#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Individual package selection"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "อัพเกรด"

#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr ""

#: help.pm:146
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "ตำแหน่ง"

#: help.pm:146
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "ออกจากการติดตั้ง"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904
#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:309 standalone/net_applet:374
#: ugtk2.pm:915 wizards.pm:156
#, c-format
msgid "No"
msgstr "ไม่ต้อง"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157
#: modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:308
#: standalone/net_applet:378 ugtk2.pm:915 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "ใช่"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2327 standalone/drakbackup:2331
#: standalone/drakbackup:2335 standalone/drakbackup:2339
#, c-format
msgid "Configure"
msgstr "การปรับแต่ง"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:879
#, fuzzy, c-format
msgid "Hardware clock set to GMT"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"

#: help.pm:217
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Boot Style Configuration"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "ใช้พื้นที่ที่ว่าง"

#: help.pm:374
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"

#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "ลบ disk ทั้งหมด"

#: help.pm:374
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "ลบ Windows(TM)"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""

#: help.pm:409
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"

#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Replay"
msgstr "เรียกอีกครั้ง"

#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Automated"
msgstr "อัตโนมัติ"

#: help.pm:409 install_steps_interactive.pm:1333
#, c-format
msgid "Save packages selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433
#: interactive/newt.pm:318 printer/printerdrake.pm:3676
#: standalone/drakTermServ:362 standalone/drakbackup:3900
#: standalone/drakbackup:3939 standalone/drakbackup:4050
#: standalone/drakbackup:4065 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "ก่อน"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:155 standalone/drakbackup:4097
#, c-format
msgid "Install"
msgstr "ติดตั้ง"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""

#: help.pm:458
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""

#: help.pm:530
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "Logitech MouseMan"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, fuzzy, c-format
msgid "authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
#, c-format
msgid "CUPS"
msgstr ""

#: help.pm:765
#, fuzzy, c-format
msgid "Expert"
msgstr "โหมดผู้เชี่ยวชาญ"

#: help.pm:768
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX จะพยายามหา PCI SCSI adapter(s)  ถ้า DrakX\n"
"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
"ถูกติดตั้งโดยออโตเมติก\n"
"\n"
"\n"
"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
"ไม่สามารถหาเจอ  คุณจะโดนถามว่ามี  SCSI adapter ในเครื่องของคุณ\n"
"หรือไม่  ถ้าไม่มีกรุณากดที่ \"ไม่\"  แต่ถ้าคุณกดลงที่  \"ไช่\" คุณจะต้องเลือก\n"
"ชนิดของ adapter ที่คุณมีอยู่\n"
"\n"
"\n"
"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
"Option หรือไม่  ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
"\n"
"\n"
"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง  คุณควรหาข้อมูลเพิ่ม\n"
"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1011
#: install_steps_interactive.pm:1028
#, c-format
msgid "Sound card"
msgstr "Sound card"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:970 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "โซนเวลา"

#: help.pm:855 install_steps_interactive.pm:1044
#, c-format
msgid "TV card"
msgstr "TV card"

#: help.pm:855
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Internal ISDN card"

#: help.pm:855
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1062
#: standalone/drakbackup:2021
#, c-format
msgid "Network"
msgstr "ระบบเครือข่าย"

#: help.pm:855 install_steps_interactive.pm:1074
#, fuzzy, c-format
msgid "Proxies"
msgstr "Profile: "

#: help.pm:855 install_steps_interactive.pm:1085
#, c-format
msgid "Security Level"
msgstr "ระดับความปลอดภัย"

#: help.pm:855 install_steps_interactive.pm:1099
#, c-format
msgid "Firewall"
msgstr ""

#: help.pm:855 install_steps_interactive.pm:1115
#, fuzzy, c-format
msgid "Bootloader"
msgstr "Bootloader ที่จะใช้"

#: help.pm:855 install_steps_interactive.pm:1128 services.pm:193
#, c-format
msgid "Services"
msgstr "บริการ"

#: help.pm:858
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"เลือก harddisk ที่ต้องการลบและลง Mandriva Linux\n"
"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
"และจะไม่สามารถกู้คืนได้"

#: help.pm:863
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
"\n"
"\n"
"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Next ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- ก่อน"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr ""

#: install_any.pm:405
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:408
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: install_any.pm:421 printer/printerdrake.pm:3022
#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "ซีดี-รอม"

#: install_any.pm:421
#, fuzzy, c-format
msgid "Network (HTTP)"
msgstr "Network interface"

#: install_any.pm:421
#, fuzzy, c-format
msgid "Network (FTP)"
msgstr "Network interface"

#: install_any.pm:421
#, c-format
msgid "Network (NFS)"
msgstr ""

#: install_any.pm:451
#, c-format
msgid "Insert the CD 1 again"
msgstr ""

#: install_any.pm:477 standalone/drakbackup:112
#, fuzzy, c-format
msgid "No device found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: install_any.pm:482
#, c-format
msgid "Insert the CD"
msgstr ""

#: install_any.pm:487
#, fuzzy, c-format
msgid "Unable to mount CD-ROM"
msgstr "ไม่สามารถ forkได้.%s"

#: install_any.pm:520 install_any.pm:539
#, c-format
msgid "URL of the mirror?"
msgstr ""

#: install_any.pm:525
#, c-format
msgid "NFS setup"
msgstr ""

#: install_any.pm:525
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:526
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:526
#, c-format
msgid "Directory"
msgstr ""

#: install_any.pm:575
#, fuzzy, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Adapter %s: %s"

#: install_any.pm:740
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"เปลี่ยน  CD-ROM\n"
"\n"
"กรุณาใส่ CD-ROM \"%s\" และกด OK"

#: install_any.pm:753
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "ค้นหาเจอบน port %s"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:895
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:918
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: install_any.pm:1354 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"

#: install_any.pm:1585
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: install_any.pm:1587
#, c-format
msgid "%s (previously named as %s)"
msgstr ""

#: install_any.pm:1625
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"

#: install_any.pm:1669
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1669
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1669
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1692
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "กรุณาเลือก"

#: install_any.pm:1708
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"

#: install_any.pm:1712
#, c-format
msgid "Permission denied"
msgstr "สิทธิการทำงานถูกปฎิเสท"

#: install_any.pm:1761
#, c-format
msgid "Bad NFS name"
msgstr ""

#: install_any.pm:1782
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "อุปกรณ์ที่ถูกเพิ่มเข้ามา %s"

#: install_any.pm:1829
#, fuzzy, c-format
msgid "Can not make screenshots before partitioning"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"

#: install_any.pm:1836
#, fuzzy, c-format
msgid "Screenshots will be available after install in %s"
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"

#: install_gtk.pm:136
#, fuzzy, c-format
msgid "System installation"
msgstr "การติดตั้ง SILO"

#: install_gtk.pm:139
#, fuzzy, c-format
msgid "System configuration"
msgstr "การคอนฟิก"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"hardware บางชนิดต้องการ driver พิเศษ\n"
"คุณสามารถหาข้อมูลได้จาก: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"คุณต้องมี root พาร์ติชั่น\n"
"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
"\n"
"ต้องการจะทำต่อหรือไม่?"

#: install_interactive.pm:70 install_steps.pm:218
#, fuzzy, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "ใช้ windows partion สำหรับการ Loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "เลือกขนาด"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "ขนาดของพาร์ติชั่นรูท MB:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "

#: install_interactive.pm:130
#, fuzzy, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
"มีข้อผิดพลาดนี้เกิดขึ้น: %s"

#: install_interactive.pm:156
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ระวัง!\n"
"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่  และคุณสมควรที่จะทำการ\n"
"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
"เมื่อคุณแน่ใจแล้ว กด OK"

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "พาร์ติชั่น %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"

#: install_interactive.pm:208
#, fuzzy, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "ลบ Windows(TM)"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "คุณมี harddisk มากกว่า  1 ตัว  คุณต้องการลง linux บน harddisk ตัวใหน"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "ใช้ fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "การทำพาร์ติชั่นล้มเหลว: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, fuzzy, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:131
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
"\n"
"\n"
"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
"โปรดอ่าน Errata ได้ที่ \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrivalinux.com/en/errata.php3"
msgstr "http://www.mandrivalinux.com/en/errata.php3"

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "ทำซ้ำจุดเม้าท์ %s"

#: install_steps.pm:469
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
"โดยใช้ \"rpm -qpl media/main/*.rpm\"\n"

#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "เข้าสู่ขั้นตอน `%s'\n"

#: install_steps_gtk.pm:177
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
"Mandriva Linux  ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"

#: install_steps_gtk.pm:224 install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: install_steps_gtk.pm:250 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "ขนาดรวม: %d / %d MB "

#: install_steps_gtk.pm:295
#, c-format
msgid "Bad package"
msgstr "แพ็คเก็จชำรุด"

#: install_steps_gtk.pm:297
#, c-format
msgid "Version: "
msgstr "เวอร์ชัน:"

#: install_steps_gtk.pm:298
#, c-format
msgid "Size: "
msgstr "ขนาด:"

#: install_steps_gtk.pm:298
#, fuzzy, c-format
msgid "%d KB\n"
msgstr "ขนาด: %d KB\n"

#: install_steps_gtk.pm:299
#, c-format
msgid "Importance: "
msgstr "ความสำคัญ:"

#: install_steps_gtk.pm:332
#, c-format
msgid "You can not select/unselect this package"
msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"

#: install_steps_gtk.pm:336
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "ไม่มี kdesu "

#: install_steps_gtk.pm:337
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: install_steps_gtk.pm:338
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:339
#, c-format
msgid "in order to keep %s"
msgstr ""

#: install_steps_gtk.pm:344
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"

#: install_steps_gtk.pm:347
#, c-format
msgid "The following packages are going to be installed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: install_steps_gtk.pm:348
#, c-format
msgid "The following packages are going to be removed"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"

#: install_steps_gtk.pm:372
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"

#: install_steps_gtk.pm:374
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"

#: install_steps_gtk.pm:377
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: install_steps_gtk.pm:380
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้  มันจำเป็นที่จะต้องถูก upgrade"

#: install_steps_gtk.pm:385
#, c-format
msgid "Show automatically selected packages"
msgstr ""

#: install_steps_gtk.pm:390
#, fuzzy, c-format
msgid "Load/Save selection"
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: install_steps_gtk.pm:391
#, fuzzy, c-format
msgid "Updating package selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: install_steps_gtk.pm:396
#, fuzzy, c-format
msgid "Minimal install"
msgstr "ออกจากการติดตั้ง"

#: install_steps_gtk.pm:410 install_steps_interactive.pm:483
#, c-format
msgid "Choose the packages you want to install"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"

#: install_steps_gtk.pm:426 install_steps_interactive.pm:710
#, c-format
msgid "Installing"
msgstr "กำลังติดตั้ง"

#: install_steps_gtk.pm:433
#, c-format
msgid "Estimating"
msgstr "การประเมิน"

#: install_steps_gtk.pm:482
#, fuzzy, c-format
msgid "No details"
msgstr "รายละเอียด"

#: install_steps_gtk.pm:490
#, c-format
msgid "Time remaining "
msgstr "เวลาที่เหลือ "

#: install_steps_gtk.pm:497
#, c-format
msgid "Please wait, preparing installation..."
msgstr "กำลังเตรียมการติดตั้ง"

#: install_steps_gtk.pm:512
#, c-format
msgid "%d packages"
msgstr "แพ็คเก็จ %d ชุด"

#: install_steps_gtk.pm:517
#, c-format
msgid "Installing package %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735
#, c-format
msgid "Refuse"
msgstr "ไม่ยอมรับ"

#: install_steps_gtk.pm:556 install_steps_interactive.pm:739
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"เปลี่ยน  CD-ROM\n"
"\n"
"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"

#: install_steps_gtk.pm:571 install_steps_interactive.pm:750
#, c-format
msgid "There was an error ordering packages:"
msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"

#: install_steps_gtk.pm:571 install_steps_gtk.pm:575
#: install_steps_interactive.pm:750 install_steps_interactive.pm:754
#, c-format
msgid "Go on anyway?"
msgstr "ทำงานต่อหรือไม่?"

#: install_steps_gtk.pm:575 install_steps_interactive.pm:754
#, c-format
msgid "There was an error installing packages:"
msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"

#: install_steps_gtk.pm:617 install_steps_interactive.pm:926
#: install_steps_interactive.pm:1075
#, fuzzy, c-format
msgid "not configured"
msgstr "คอนฟิกใหม่"

#: install_steps_gtk.pm:680
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_steps_gtk.pm:689
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""

#: install_steps_gtk.pm:691
#, c-format
msgid "Copy whole CDs"
msgstr ""

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "License agreement"

#: install_steps_interactive.pm:88
#, fuzzy, c-format
msgid "Release Notes"
msgstr "โปรดรอสักครู่"

#: install_steps_interactive.pm:118
#, fuzzy, c-format
msgid "Please choose your keyboard layout."
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: install_steps_interactive.pm:120
#, fuzzy, c-format
msgid "Here is the full list of available keyboards"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#: install_steps_interactive.pm:150
#, fuzzy, c-format
msgid "Install/Upgrade"
msgstr "ติดตั้ง/อัพเกรด "

#: install_steps_interactive.pm:151
#, fuzzy, c-format
msgid "Is this an install or an upgrade?"
msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"

#: install_steps_interactive.pm:157
#, fuzzy, c-format
msgid "Upgrade %s"
msgstr "Update"

#: install_steps_interactive.pm:168
#, fuzzy, c-format
msgid "Encryption key for %s"
msgstr "รหัสผ่านไม่เหมือนกัน"

#: install_steps_interactive.pm:185
#, fuzzy, c-format
msgid "Please choose your type of mouse."
msgstr "คุณมีเม้าส์ชนิดใด"

#: install_steps_interactive.pm:194 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "พอร์ตของเม้าส์"

#: install_steps_interactive.pm:195 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: install_steps_interactive.pm:205
#, c-format
msgid "Buttons emulation"
msgstr ""

#: install_steps_interactive.pm:207
#, c-format
msgid "Button 2 Emulation"
msgstr ""

#: install_steps_interactive.pm:208
#, c-format
msgid "Button 3 Emulation"
msgstr ""

#: install_steps_interactive.pm:229
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:229
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "กำลังคอนฟิกการ์ด PCMCIA..."

#: install_steps_interactive.pm:236
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:236
#, c-format
msgid "Configuring IDE"
msgstr "คอนฟิก IDE"

#: install_steps_interactive.pm:256
#, c-format
msgid "No partition available"
msgstr "ไม่มีพาร์ติชั่นเหลือ"

#: install_steps_interactive.pm:259
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Scanning partitions to find mount points"

#: install_steps_interactive.pm:266
#, c-format
msgid "Choose the mount points"
msgstr "เลือกจุดเม้าท์"

#: install_steps_interactive.pm:312
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:317
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""

#: install_steps_interactive.pm:353
#, c-format
msgid "Choose the partitions you want to format"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: install_steps_interactive.pm:355
#, c-format
msgid "Check bad blocks?"
msgstr "ตรวจสอบ bad blocks"

#: install_steps_interactive.pm:383
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:386
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"

#: install_steps_interactive.pm:393
#, fuzzy, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "กำลังหาแพ็คเก็จที่มีอยู่"

#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
#, c-format
msgid "Looking for available packages..."
msgstr "กำลังหาแพ็คเก็จที่มีอยู่"

#: install_steps_interactive.pm:397
#, fuzzy, c-format
msgid "Looking at packages already installed..."
msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"

#: install_steps_interactive.pm:401
#, c-format
msgid "Finding packages to upgrade..."
msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"

#: install_steps_interactive.pm:421 install_steps_interactive.pm:830
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"

#: install_steps_interactive.pm:461
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"

#: install_steps_interactive.pm:495
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""

#: install_steps_interactive.pm:497
#, c-format
msgid "Load"
msgstr "โหลด"

#: install_steps_interactive.pm:497 standalone/drakbackup:3918
#: standalone/drakbackup:3991 standalone/drakroam:210 standalone/logdrake:172
#, c-format
msgid "Save"
msgstr "บันทึก"

#: install_steps_interactive.pm:505
#, fuzzy, c-format
msgid "Bad file"
msgstr "เปิดแฟ้ม"

#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr ""

#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr ""

#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""

#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:641 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "ทั้งหมด"

#: install_steps_interactive.pm:680
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"

#: install_steps_interactive.pm:685
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom labeled \"%s\""

#: install_steps_interactive.pm:710
#, c-format
msgid "Preparing installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: install_steps_interactive.pm:719
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"กำลังติดตั้งแพ็คเก็จ %s\n"
"%d%%"

#: install_steps_interactive.pm:768
#, c-format
msgid "Post-install configuration"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: install_steps_interactive.pm:775
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:804
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""

#: install_steps_interactive.pm:825
#, fuzzy, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"

#: install_steps_interactive.pm:844
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"

#: install_steps_interactive.pm:848
#, fuzzy, c-format
msgid "Unable to contact mirror %s"
msgstr "ไม่สามารถ forkได้.%s"

#: install_steps_interactive.pm:848
#, fuzzy, c-format
msgid "Would you like to try again?"
msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"

#: install_steps_interactive.pm:875 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "คุณใช้ย่านเวลาใด? "

#: install_steps_interactive.pm:880
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: install_steps_interactive.pm:888
#, fuzzy, c-format
msgid "NTP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: install_steps_interactive.pm:930 steps.pm:30
#, c-format
msgid "Summary"
msgstr "รวมความ"

#: install_steps_interactive.pm:943 install_steps_interactive.pm:951
#: install_steps_interactive.pm:969 install_steps_interactive.pm:976
#: install_steps_interactive.pm:1127 services.pm:133
#: standalone/drakbackup:1573
#, c-format
msgid "System"
msgstr "ระบบ"

#: install_steps_interactive.pm:983 install_steps_interactive.pm:1010
#: install_steps_interactive.pm:1027 install_steps_interactive.pm:1043
#: install_steps_interactive.pm:1054
#, c-format
msgid "Hardware"
msgstr "ฮาร์ดแวร์"

#: install_steps_interactive.pm:989 install_steps_interactive.pm:998
#, c-format
msgid "Remote CUPS server"
msgstr "Remote CUPS server"

#: install_steps_interactive.pm:989
#, c-format
msgid "No printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: install_steps_interactive.pm:1031
#, fuzzy, c-format
msgid "Do you have an ISA sound card?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#: install_steps_interactive.pm:1033
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""

#: install_steps_interactive.pm:1035
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: install_steps_interactive.pm:1055
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"

#: install_steps_interactive.pm:1061 install_steps_interactive.pm:1073
#, c-format
msgid "Network & Internet"
msgstr "เน็ตเวิร์คกับอินเตอร์เน็ต"

#: install_steps_interactive.pm:1075
#, fuzzy, c-format
msgid "configured"
msgstr "คอนฟิกใหม่"

#: install_steps_interactive.pm:1084 install_steps_interactive.pm:1098
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "ระบบความป้องกัน"

#: install_steps_interactive.pm:1103
#, fuzzy, c-format
msgid "activated"
msgstr "แอ็คทีฟ"

#: install_steps_interactive.pm:1103
#, c-format
msgid "disabled"
msgstr "ไม่ใช้งาน"

#: install_steps_interactive.pm:1114
#, c-format
msgid "Boot"
msgstr "บู๊ต"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1118
#, c-format
msgid "%s on %s"
msgstr "%s บน %s"

#: install_steps_interactive.pm:1132 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: install_steps_interactive.pm:1142
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""

#: install_steps_interactive.pm:1223
#, c-format
msgid "Preparing bootloader..."
msgstr "กำลังเตรียมบูตโหลดเดอร์"

#: install_steps_interactive.pm:1233
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""

#: install_steps_interactive.pm:1239
#, c-format
msgid "Do you want to use aboot?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: install_steps_interactive.pm:1242
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"การติดตั้ง aboot ล้มเหลว\n"
"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"

#: install_steps_interactive.pm:1259
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1288 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: install_steps_interactive.pm:1293
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: install_steps_interactive.pm:1295
#, c-format
msgid "Creating auto install floppy..."
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: install_steps_interactive.pm:1307
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
"\n"
"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"

#: install_steps_interactive.pm:1323
#, c-format
msgid "Generate auto install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"

#: install_steps_interactive.pm:1325
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
"ในกรณีนั้นมันจะใช้ harddisk  ทั้งหมด\n"
"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "

#: interactive.pm:192
#, fuzzy, c-format
msgid "Choose a file"
msgstr "เลือกกิจกรรม"

#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakbackup:1514
#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:593
#: standalone/drakroam:218 standalone/drakups:301 standalone/drakups:361
#: standalone/drakups:381 standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "เพิ่ม"

#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:249
#: standalone/draknfs:600
#, c-format
msgid "Modify"
msgstr "แก้ไข"

#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:256
#: standalone/draknfs:607 standalone/drakroam:202 standalone/drakups:303
#: standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "เอาออก"

#: interactive.pm:394
#, c-format
msgid "Basic"
msgstr "พื้นฐาน"

#: interactive.pm:432 interactive/newt.pm:321 ugtk2.pm:510
#, c-format
msgid "Finish"
msgstr "เสร็จแล้ว"

#: interactive/newt.pm:92
#, fuzzy, c-format
msgid "Do"
msgstr "ทำเรียบร้อยแล้ว"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:70
#, fuzzy, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:94
#, fuzzy, c-format
msgid "Button `%s': %s"
msgstr "พาร์ติชั่น %s"

#: interactive/stdio.pm:95
#, fuzzy, c-format
msgid "Do you want to click on this button?"
msgstr "คุณต้องการใช้ aboot หรือไม่"

#: interactive/stdio.pm:104
#, fuzzy, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr ""

#: keyboard.pm:171 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "เชคโกสโลวาเกีย (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "เยอรมัน"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:174 keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "สเปน"

#: keyboard.pm:175 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "ฟินแลนด์"

#: keyboard.pm:176 keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "ฝรั่งเศษ"

#: keyboard.pm:177 keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "นอร์เวย์"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "โปแลนด์"

#: keyboard.pm:179 keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "รัสเซีย"

#: keyboard.pm:181 keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "สวีเดน"

#: keyboard.pm:182 keyboard.pm:320
#, c-format
msgid "UK keyboard"
msgstr "อังกฤษ"

#: keyboard.pm:183 keyboard.pm:323
#, c-format
msgid "US keyboard"
msgstr "อเมริกา"

#: keyboard.pm:185
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Iranian"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "อาร์เมเนียน (เก่า)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr ""

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Azerbaidjani (latin)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "เบลเยี่ยม"

#: keyboard.pm:192
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: keyboard.pm:193
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "เบลเยี่ยม"

#: keyboard.pm:194
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:195
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "บัลกาเรีย"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "บราซิล"

#: keyboard.pm:197
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "Estonian"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Belarusian"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"

#: keyboard.pm:204
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "เชคโกสโลวาเกีย (QWERTY)"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "German (no dead keys)"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "เดนมาร์ก"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:213
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:215
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:217
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (US)"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:220
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (US)"

#: keyboard.pm:221
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (US)"

#: keyboard.pm:222
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Estonian"

#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Estonian"

#: keyboard.pm:227
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "กรีก"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "กรีก"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Croatian"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "อังการี"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr ""

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "อิสราเอล"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "อิลราเอล (โฟเนติค)"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Iranian"

#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "ไอซ์แลนด์"

#: keyboard.pm:242
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "อิตาลี"

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "Japanese 106 keys"

#: keyboard.pm:249
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "ปฎิทิน"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "Korean keyboard"

#: keyboard.pm:254
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:255
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "อังกฤษ"

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "ละตินอเมริกา"

#: keyboard.pm:258
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "ตำแหน่ง"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Lithuanian AZERTY (old)"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Lithuanian AZERTY (new)"

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"

#: keyboard.pm:264
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "ตำแหน่ง"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr ""

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Macedonian"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:268
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "ฮอลแลนด์"

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr ""

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Polish (qwerty layout)"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Polish (qwertz layout)"

#: keyboard.pm:277
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "โปแลนด์"

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "โปรตุเกส"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "คานาดา (ควิเบค)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr ""

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr ""

#: keyboard.pm:285
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "รัสเซีย (โฟเนติค)"

#: keyboard.pm:286
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Dvorak (Norwegian)"

#: keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:289
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "ไทย"

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "สโลวาเนีย"

#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "สโลวาเกีย (QWERTZ)"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "สโลวาเกีย (QWERTY)"

#: keyboard.pm:297
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:298
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "พอร์ตอนุกรม"

#: keyboard.pm:299
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "อาร์เมเนียน (โฟเนติค)"

#: keyboard.pm:300
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "เบลเยี่ยม"

#: keyboard.pm:302
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr ""

#: keyboard.pm:303
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#: keyboard.pm:304
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "ไทย"

#: keyboard.pm:305
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "ไทย"

#: keyboard.pm:307
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "ไทย"

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:311
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:313
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "ไทย"

#: keyboard.pm:315
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "เยอรมัน"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "ตุรกี (โมเดลแบบแผน \"F\")"

#: keyboard.pm:317
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "ยูเครน"

#: keyboard.pm:322
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Korean keyboard"

#: keyboard.pm:324
#, c-format
msgid "US keyboard (international)"
msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"

#: keyboard.pm:325
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Azerbaidjani (cyrillic)"

#: keyboard.pm:327
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamese \"numeric row\" QWERTY"

#: keyboard.pm:328
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"

#: keyboard.pm:335
#, c-format
msgid "Right Alt key"
msgstr ""

#: keyboard.pm:336
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""

#: keyboard.pm:337
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:338
#, c-format
msgid "CapsLock key"
msgstr ""

#: keyboard.pm:339
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr ""

#: keyboard.pm:340
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: keyboard.pm:341
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:342
#, c-format
msgid "\"Menu\" key"
msgstr ""

#: keyboard.pm:343
#, c-format
msgid "Left \"Windows\" key"
msgstr ""

#: keyboard.pm:344
#, c-format
msgid "Right \"Windows\" key"
msgstr ""

#: keyboard.pm:345
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""

#: keyboard.pm:346
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""

#: keyboard.pm:347
#, c-format
msgid "Left Shift key"
msgstr ""

#: keyboard.pm:348
#, c-format
msgid "Right Shift key"
msgstr ""

#: keyboard.pm:349
#, c-format
msgid "Left Alt key"
msgstr ""

#: keyboard.pm:350
#, fuzzy, c-format
msgid "Left Control key"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: keyboard.pm:351
#, fuzzy, c-format
msgid "Right Control key"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: keyboard.pm:387
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#: keyboard.pm:392
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, fuzzy, c-format
msgid "Andorra"
msgstr "ยกเลิก"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr ""

#: lang.pm:197
#, fuzzy, c-format
msgid "Afghanistan"
msgstr "Iranian"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr ""

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr ""

#: lang.pm:200
#, fuzzy, c-format
msgid "Albania"
msgstr "Iranian"

#: lang.pm:201
#, fuzzy, c-format
msgid "Armenia"
msgstr "อาร์เมเนียน (เก่า)"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr ""

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr ""

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr ""

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr ""

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr ""

#: lang.pm:209
#, fuzzy, c-format
msgid "Aruba"
msgstr "Grub"

#: lang.pm:210
#, fuzzy, c-format
msgid "Azerbaijan"
msgstr "Iranian"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr ""

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr ""

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr ""

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr ""

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, fuzzy, c-format
msgid "Bulgaria"
msgstr "อังการี"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr ""

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr ""

#: lang.pm:219
#, fuzzy, c-format
msgid "Benin"
msgstr "เบลเยี่ยม"

#: lang.pm:220
#, fuzzy, c-format
msgid "Bermuda"
msgstr "เยอรมัน"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr ""

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr ""

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr ""

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr ""

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr ""

#: lang.pm:227
#, fuzzy, c-format
msgid "Botswana"
msgstr "Estonian"

#: lang.pm:228
#, fuzzy, c-format
msgid "Belarus"
msgstr "Belarusian"

#: lang.pm:229
#, fuzzy, c-format
msgid "Belize"
msgstr "เปลี่ยนขนาด"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr ""

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr ""

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr ""

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr ""

#: lang.pm:238
#, fuzzy, c-format
msgid "Chile"
msgstr "เลือก file"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr ""

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "จีน"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr ""

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr ""

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr ""

#: lang.pm:245
#, fuzzy, c-format
msgid "Cape Verde"
msgstr "ยุบ tree"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr ""

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr ""

#: lang.pm:250
#, fuzzy, c-format
msgid "Djibouti"
msgstr "เลิก"

#: lang.pm:252
#, fuzzy, c-format
msgid "Dominica"
msgstr "โดเมน NIS"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr ""

#: lang.pm:254 network/adsl_consts.pm:44
#, fuzzy, c-format
msgid "Algeria"
msgstr "พอร์ตอนุกรม"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr ""

#: lang.pm:257
#, fuzzy, c-format
msgid "Egypt"
msgstr "ว่าง"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr ""

#: lang.pm:259
#, fuzzy, c-format
msgid "Eritrea"
msgstr "ส่วนของผู้เชี่ยวชาญ"

#: lang.pm:261
#, fuzzy, c-format
msgid "Ethiopia"
msgstr "Estonian"

#: lang.pm:263
#, fuzzy, c-format
msgid "Fiji"
msgstr "ฟินแลนด์"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr ""

#: lang.pm:265
#, fuzzy, c-format
msgid "Micronesia"
msgstr "Macedonian"

#: lang.pm:266
#, fuzzy, c-format
msgid "Faroe Islands"
msgstr "ไอซ์แลนด์"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr ""

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "อังกฤษ"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr ""

#: lang.pm:271
#, fuzzy, c-format
msgid "Georgia"
msgstr "นอร์เวย์"

#: lang.pm:272
#, fuzzy, c-format
msgid "French Guiana"
msgstr "ฝรั่งเศษ"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr ""

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr ""

#: lang.pm:275
#, fuzzy, c-format
msgid "Greenland"
msgstr "ไอซ์แลนด์"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr ""

#: lang.pm:277
#, fuzzy, c-format
msgid "Guinea"
msgstr "ทั่วไป"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr ""

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr ""

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: lang.pm:282
#, fuzzy, c-format
msgid "Guatemala"
msgstr "เกตเวย์"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr ""

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr ""

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr ""

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr ""

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr ""

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr ""

#: lang.pm:289
#, fuzzy, c-format
msgid "Croatia"
msgstr "Croatian"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr ""

#: lang.pm:292
#, fuzzy, c-format
msgid "Indonesia"
msgstr "ไม่มี"

#: lang.pm:295
#, fuzzy, c-format
msgid "India"
msgstr "Iranian"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr ""

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr ""

#: lang.pm:298
#, fuzzy, c-format
msgid "Iran"
msgstr "Iranian"

#: lang.pm:299
#, fuzzy, c-format
msgid "Iceland"
msgstr "ไอซ์แลนด์"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr ""

#: lang.pm:302
#, fuzzy, c-format
msgid "Jordan"
msgstr "Iranian"

#: lang.pm:304
#, fuzzy, c-format
msgid "Kenya"
msgstr "คีย์บอร์ด"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr ""

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr ""

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr ""

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr ""

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr ""

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "เกาหลี"

#: lang.pm:312
#, fuzzy, c-format
msgid "Kuwait"
msgstr "ออก"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr ""

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr ""

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr ""

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr ""

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr ""

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr ""

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr ""

#: lang.pm:320
#, fuzzy, c-format
msgid "Liberia"
msgstr "พอร์ตอนุกรม"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr ""

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr ""

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr ""

#: lang.pm:324
#, fuzzy, c-format
msgid "Latvia"
msgstr "ตำแหน่ง"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr ""

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr ""

#: lang.pm:327
#, fuzzy, c-format
msgid "Monaco"
msgstr "จอภาพ"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr ""

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr ""

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr ""

#: lang.pm:331
#, fuzzy, c-format
msgid "Macedonia"
msgstr "Macedonian"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr ""

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "พม่า"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr ""

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr ""

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr ""

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr ""

#: lang.pm:338
#, fuzzy, c-format
msgid "Montserrat"
msgstr "พอร์ตของเม้าส์"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr ""

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr ""

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr ""

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr ""

#: lang.pm:343
#, fuzzy, c-format
msgid "Mexico"
msgstr "Mouse"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr ""

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr ""

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr ""

#: lang.pm:347
#, fuzzy, c-format
msgid "New Caledonia"
msgstr "Macedonian"

#: lang.pm:348
#, fuzzy, c-format
msgid "Niger"
msgstr "สูง"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr ""

#: lang.pm:350
#, fuzzy, c-format
msgid "Nigeria"
msgstr "พอร์ตอนุกรม"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr ""

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr ""

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr ""

#: lang.pm:356
#, fuzzy, c-format
msgid "Niue"
msgstr "NoVideo"

#: lang.pm:358
#, fuzzy, c-format
msgid "Oman"
msgstr "โดเมน NIS"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr ""

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr ""

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr ""

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr ""

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr ""

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr ""

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr ""

#: lang.pm:367
#, fuzzy, c-format
msgid "Pitcairn"
msgstr "เครื่องพิมพ์"

#: lang.pm:368
#, fuzzy, c-format
msgid "Puerto Rico"
msgstr "Protocol"

#: lang.pm:369
#, fuzzy, c-format
msgid "Palestine"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr ""

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr ""

#: lang.pm:373
#, fuzzy, c-format
msgid "Qatar"
msgstr "สถานะ:"

#: lang.pm:374
#, fuzzy, c-format
msgid "Reunion"
msgstr "ขนาดจอภาพ"

#: lang.pm:375
#, fuzzy, c-format
msgid "Romania"
msgstr "โดเมน NIS"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr ""

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr ""

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr ""

#: lang.pm:380
#, fuzzy, c-format
msgid "Seychelles"
msgstr "เชลล์ที่ใช้"

#: lang.pm:381
#, fuzzy, c-format
msgid "Sudan"
msgstr "SunOS"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr ""

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr ""

#: lang.pm:385 network/adsl_consts.pm:747
#, fuzzy, c-format
msgid "Slovenia"
msgstr "สโลวาเนีย"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr ""

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr ""

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr ""

#: lang.pm:390 network/adsl_consts.pm:737
#, fuzzy, c-format
msgid "Senegal"
msgstr "enable"

#: lang.pm:391
#, fuzzy, c-format
msgid "Somalia"
msgstr "โดเมน NIS"

#: lang.pm:392
#, fuzzy, c-format
msgid "Suriname"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr ""

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr ""

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr ""

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr ""

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr ""

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr ""

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr ""

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr ""

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr ""

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr ""

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr ""

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr ""

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr ""

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr ""

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr ""

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr ""

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr ""

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr ""

#: lang.pm:413
#, fuzzy, c-format
msgid "Ukraine"
msgstr "ยูเครน"

#: lang.pm:414
#, fuzzy, c-format
msgid "Uganda"
msgstr "Update"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr ""

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr ""

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr ""

#: lang.pm:419
#, fuzzy, c-format
msgid "Vatican"
msgstr "ตำแหน่ง"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr ""

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr ""

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr ""

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr ""

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr ""

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr ""

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr ""

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr ""

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr ""

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr ""

#: lang.pm:432
#, fuzzy, c-format
msgid "Zimbabwe"
msgstr "อาจจะ"

#: lang.pm:1079
#, fuzzy, c-format
msgid "You should install the following packages: %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: lang.pm:1082 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: lang.pm:1135
#, c-format
msgid "Welcome to %s"
msgstr "ยินดีต้อนรับสู่ %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "ลบ logical volume ก่อน\n"

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physicals volumes"
msgstr ""

#: modules/interactive.pm:21 standalone/drakconnect:1028
#, c-format
msgid "Parameters"
msgstr "Parameters"

#: modules/interactive.pm:21 standalone/draksec:51
#, c-format
msgid "NONE"
msgstr ""

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "การคอนฟิก"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr ""

#: modules/interactive.pm:63
#, fuzzy, c-format
msgid "Found %s interfaces"
msgstr "ตรวจพบ %s อินเทอร์เฟส %s"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"

#: modules/interactive.pm:82
#, fuzzy, c-format
msgid "Installing driver for USB controller"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: modules/interactive.pm:83
#, fuzzy, c-format
msgid "Installing driver for firewire controller %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: modules/interactive.pm:84
#, fuzzy, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: modules/interactive.pm:85
#, fuzzy, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(โมดูล %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
"ตัวอย่างเช่น, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "อ๊อปชั่นของโมดูล:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
"ข้อมูลดังกล่าว   คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "ตรวจหาอัตโนมัติ"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "ระบุอ๊อปชั่น"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"การโหลดโมดูล %s ล้มเหลว\n"
"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"

#: modules/parameters.pm:49
#, fuzzy, c-format
msgid "a number"
msgstr "หมายเลขโทรศัพท์"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr ""

#: modules/parameters.pm:53
#, fuzzy, c-format
msgid "comma separated strings"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Mouse"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Standard"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Generic PS2 Wheel Mouse"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:73 network/modem.pm:87 network/modem.pm:92
#: network/modem.pm:125 network/netconnect.pm:585 network/netconnect.pm:590
#: network/netconnect.pm:602 network/netconnect.pm:607
#: network/netconnect.pm:623 network/netconnect.pm:625
#, c-format
msgid "Automatic"
msgstr "อัตโนมัติ"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, fuzzy, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 ปุ่ม"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Generic 2 Button Mouse"

#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Wheel"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "พอร์ตอนุกรม"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"

#: mouse.pm:72
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"

#: mouse.pm:74
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 buttons"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 buttons"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr ""

#: mouse.pm:86
#, fuzzy, c-format
msgid "Universal"
msgstr "ออกจากการติดตั้ง"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "ไม่มี"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "ไม่มีเม้าส์"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr ""

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "กรุณาทดสอบเม้าส์"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "เพื่อให้เม้าส์ทำงาน"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "เลื่อนล้อของคุณ"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, fuzzy, c-format
msgid "Web Server"
msgstr "เซิร์ฟเวอร์"

#: network/drakfirewall.pm:17
#, fuzzy, c-format
msgid "Domain Name Server"
msgstr "ชื่อโดเมน"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "เซอร์เวอร์ FTP"

#: network/drakfirewall.pm:32
#, fuzzy, c-format
msgid "Mail Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: network/drakfirewall.pm:37
#, fuzzy, c-format
msgid "POP and IMAP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X เซิร์ฟเวอร์"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr ""

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr ""

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:164
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:181
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:188
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:198
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:200
#, fuzzy, c-format
msgid "Other ports"
msgstr "กำลังตรวจสอบพอร์ต"

#: network/isdn.pm:117 network/netconnect.pm:459 network/netconnect.pm:546
#: network/netconnect.pm:549 network/netconnect.pm:692
#: network/netconnect.pm:696
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:160 network/netconnect.pm:391
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:391
#, c-format
msgid "I do not know"
msgstr "ผมไม่ทราบ"

#: network/isdn.pm:161 network/netconnect.pm:391
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:391
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:590 network/netconnect.pm:607
#: network/netconnect.pm:623
#, c-format
msgid "Manual"
msgstr "_ระบุค่า"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr ""

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:489
#: network/netconnect.pm:496
#, fuzzy, c-format
msgid "Manual choice"
msgstr "เลือกภาษาที่คุณใช้"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "Internal ISDN card"

#: network/netconnect.pm:80 printer/printerdrake.pm:1418 standalone/drakups:75
#, fuzzy, c-format
msgid "Manual configuration"
msgstr "การคอนฟิก"

#: network/netconnect.pm:81
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:86
#, fuzzy, c-format
msgid "Protocol for the rest of the world"
msgstr "Rest of the world"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, fuzzy, c-format
msgid "European protocol (EDSS1)"
msgstr "ยุโรป (EDS11)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, fuzzy, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Rest of the world \n"
"No D-Channel (leased lines)"

#: network/netconnect.pm:121 network/thirdparty.pm:184
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "กรุณาทดสอบเม้าส์"

#: network/netconnect.pm:122
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "System mode"

#: network/netconnect.pm:123
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:124
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:128
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:129
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "การคอนฟิก"

#: network/netconnect.pm:130
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:131
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:132
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:133
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:137
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Ethernet Card"

#: network/netconnect.pm:138
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Ethernet Card"

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:140
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA LLC"
msgstr ""

#: network/netconnect.pm:142
#, c-format
msgid "PPPoA VC"
msgstr ""

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "รูปแบบสคริปต์"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "รูปแบบเทอร์มินอล"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:150 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:155
#, c-format
msgid "Open WEP"
msgstr ""

#: network/netconnect.pm:156
#, c-format
msgid "Restricted WEP"
msgstr ""

#: network/netconnect.pm:157
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: network/netconnect.pm:247 standalone/drakconnect:56
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:253
#, c-format
msgid "LAN connection"
msgstr "LAN connection"

#: network/netconnect.pm:254 network/netconnect.pm:273
#, c-format
msgid "Wireless connection"
msgstr "ไร้สาย"

#: network/netconnect.pm:255
#, fuzzy, c-format
msgid "ADSL connection"
msgstr "LAN connection"

#: network/netconnect.pm:256
#, c-format
msgid "Cable connection"
msgstr "cable connection"

#: network/netconnect.pm:257
#, c-format
msgid "ISDN connection"
msgstr "การติดต่อโดยใช้ ISDN"

#: network/netconnect.pm:258
#, c-format
msgid "Modem connection"
msgstr "โมเด็ม"

#: network/netconnect.pm:259
#, c-format
msgid "DVB connection"
msgstr ""

#: network/netconnect.pm:269
#, fuzzy, c-format
msgid "Choose the connection you want to configure"
msgstr "เลือกเครื่องมือที่คุณต้องการใช้"

#: network/netconnect.pm:284 network/netconnect.pm:771
#, c-format
msgid "Connection Configuration"
msgstr "การคอนฟิก Connection"

#: network/netconnect.pm:284 network/netconnect.pm:772
#, c-format
msgid "Please fill or check the field below"
msgstr "กรุณาเลือกช่องข้างล่างนี้"

#: network/netconnect.pm:287
#, c-format
msgid "Your personal phone number"
msgstr "เบอร์โทรศัพท์ส่วนตัว"

#: network/netconnect.pm:288 network/netconnect.pm:775
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "ชื่อผู้ให้บริการ (ex KSC)"

#: network/netconnect.pm:289 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "หมายเลขโทรศัพท์"

#: network/netconnect.pm:290
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "ผู้ให้บริการ dns 1 (optional)"

#: network/netconnect.pm:291
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "ผู้ให้บริการ dns 2 (optional)"

#: network/netconnect.pm:292 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: network/netconnect.pm:293 standalone/drakconnect:449
#: standalone/drakconnect:517
#, fuzzy, c-format
msgid "Connection speed"
msgstr "ชนิดการเชื่อมต่อ"

#: network/netconnect.pm:294 standalone/drakconnect:454
#, fuzzy, c-format
msgid "Connection timeout (in sec)"
msgstr "ชนิดการเชื่อมต่อ"

#: network/netconnect.pm:295 network/netconnect.pm:320
#: network/netconnect.pm:778 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "Account Login (user name)"

#: network/netconnect.pm:296 network/netconnect.pm:321
#: network/netconnect.pm:779 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "รหัสผ่าน"

#: network/netconnect.pm:297 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "Card IRQ"

#: network/netconnect.pm:298 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "Card mem (DMA)"

#: network/netconnect.pm:299 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "Card IO"

#: network/netconnect.pm:300 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "Card IO_0"

#: network/netconnect.pm:301
#, c-format
msgid "Card IO_1"
msgstr "Card IO_1"

#: network/netconnect.pm:316
#, fuzzy, c-format
msgid "Cable: account options"
msgstr "อ็อปชั่นของการหมุนโทรศัพท์"

#: network/netconnect.pm:319
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:344 network/netconnect.pm:659
#: network/netconnect.pm:810 network/netconnect.pm:1110
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "เลือก network interface"

#: network/netconnect.pm:346 network/netconnect.pm:381
#: network/netconnect.pm:660 network/netconnect.pm:812 network/shorewall.pm:69
#: standalone/drakconnect:709
#, fuzzy, c-format
msgid "Net Device"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: network/netconnect.pm:347 network/netconnect.pm:352
#, c-format
msgid "External ISDN modem"
msgstr "External ISDN modem"

#: network/netconnect.pm:380 standalone/harddrake2:216
#, fuzzy, c-format
msgid "Select a device!"
msgstr "เลือกกราฟฟิคการ์ด"

#: network/netconnect.pm:389 network/netconnect.pm:399
#: network/netconnect.pm:409 network/netconnect.pm:442
#: network/netconnect.pm:456
#, c-format
msgid "ISDN Configuration"
msgstr "การคอนฟิก ISDN"

#: network/netconnect.pm:390
#, c-format
msgid "What kind of card do you have?"
msgstr "คุณมีการ์ดชนิดใด?"

#: network/netconnect.pm:400
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
"\n"
"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"

#: network/netconnect.pm:404
#, c-format
msgid "Continue"
msgstr "ทำงานต่อหรือไม่?"

#: network/netconnect.pm:404
#, c-format
msgid "Abort"
msgstr "เลิก"

#: network/netconnect.pm:410
#, fuzzy, c-format
msgid "Which of the following is your ISDN card?"
msgstr "คุณใช้การ์ด ISDN ใด?"

#: network/netconnect.pm:428
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:430 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Driver"

#: network/netconnect.pm:442
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Protocol ไหนที่คุณต้องการ"

#: network/netconnect.pm:444 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562 standalone/drakids:25
#: standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Protocol"

#: network/netconnect.pm:456
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"เลือกผู้ให้บริการ\n"
"ถ้าไม่มีเลือก ไม่มี (unlisted)"

#: network/netconnect.pm:458 network/netconnect.pm:545
#: network/netconnect.pm:691
#, fuzzy, c-format
msgid "Provider:"
msgstr "Profile: "

#: network/netconnect.pm:467
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: network/netconnect.pm:486
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "เลือก network interface"

#: network/netconnect.pm:514
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: network/netconnect.pm:543
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: network/netconnect.pm:567
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "อ็อปชั่นของการหมุนโทรศัพท์"

#: network/netconnect.pm:570
#, c-format
msgid "Connection name"
msgstr "ชื่อการเชื่อมต่อ"

#: network/netconnect.pm:571
#, c-format
msgid "Phone number"
msgstr "หมายเลขโทรศัพท์"

#: network/netconnect.pm:572
#, c-format
msgid "Login ID"
msgstr "หมายเลขประจำตัวการล็อกอิน"

#: network/netconnect.pm:587 network/netconnect.pm:620
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Parameters"

#: network/netconnect.pm:590
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Parameters"

#: network/netconnect.pm:591 network/netconnect.pm:899
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:878
#: standalone/drakhosts:194 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "ค่า IP"

#: network/netconnect.pm:592
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "เน็ตมาสก์"

#: network/netconnect.pm:604
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:607
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:608
#, c-format
msgid "Domain name"
msgstr "ชื่อโดเมน"

#: network/netconnect.pm:609 network/netconnect.pm:776
#: standalone/drakconnect:993
#, c-format
msgid "First DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"

#: network/netconnect.pm:610 network/netconnect.pm:777
#: standalone/drakconnect:994
#, c-format
msgid "Second DNS Server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"

#: network/netconnect.pm:611
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "ชื่อของเครื่องพิมพ์"

#: network/netconnect.pm:623 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "เกตเวย์"

#: network/netconnect.pm:624
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "ค่า IP"

#: network/netconnect.pm:659
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "การปรับแต่ง LAN"

#: network/netconnect.pm:689
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "คุณมีเม้าส์ชนิดใด"

#: network/netconnect.pm:719
#, c-format
msgid "Connect to the Internet"
msgstr "ต่อเข้า Internet "

#: network/netconnect.pm:720
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use PPTP, a few use DHCP.\n"
"If you do not know, choose 'use PPPoE'"
msgstr ""
"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
"บางครั้งอาจใช้  pptp มีน้อยคนที่ใช้  DHCP.\n"
"ถ้าคุณไม่ทราบ เลือก 'use PPPoE'"

#: network/netconnect.pm:724
#, fuzzy, c-format
msgid "ADSL connection type:"
msgstr "LAN connection"

#: network/netconnect.pm:781
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:782
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:785
#, fuzzy, c-format
msgid "Encapsulation:"
msgstr "ขอแสดงความยินดี"

#: network/netconnect.pm:812
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:812
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr ""

#: network/netconnect.pm:819 network/netconnect.pm:1074
#: network/netconnect.pm:1078 printer/printerdrake.pm:3741
#: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292
#: standalone/drakgw:394
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: network/netconnect.pm:855
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:856 network/netconnect.pm:886
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"

#: network/netconnect.pm:857
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""

#: network/netconnect.pm:887
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"

#: network/netconnect.pm:894 standalone/drakconnect:373
#, fuzzy, c-format
msgid "Assign host name from DHCP address"
msgstr "กรุณาทดสอบเม้าส์"

#: network/netconnect.pm:895 standalone/drakconnect:375
#, fuzzy, c-format
msgid "DHCP host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:900 standalone/drakconnect:321
#: standalone/drakconnect:879 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "เน็ตมาสก์"

#: network/netconnect.pm:902 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:904 standalone/drakconnect:438
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:906 standalone/drakconnect:432
#, fuzzy, c-format
msgid "Start at boot"
msgstr "เริ่มทำงานตอน boot"

#: network/netconnect.pm:908 standalone/drakconnect:460
#, fuzzy, c-format
msgid "Metric"
msgstr "จำเพาะ"

#: network/netconnect.pm:910 standalone/drakconnect:369
#: standalone/drakconnect:882
#, c-format
msgid "DHCP client"
msgstr "DHCP client"

#: network/netconnect.pm:912 standalone/drakconnect:379
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "ชนิดการเชื่อมต่อ"

#: network/netconnect.pm:913 standalone/drakconnect:382
#, fuzzy, c-format
msgid "Get DNS servers from DHCP"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: network/netconnect.pm:914 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:915 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:923 printer/printerdrake.pm:1672
#: standalone/drakconnect:672
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:927 standalone/drakconnect:676
#, fuzzy, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:931
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:936 standalone/drakTermServ:1816
#: standalone/drakTermServ:1817 standalone/drakTermServ:1818
#, c-format
msgid "%s already in use\n"
msgstr ""

#: network/netconnect.pm:969
#, fuzzy, c-format
msgid "Choose an ndiswrapper driver"
msgstr "เลือก X เซิร์ฟเวอร์"

#: network/netconnect.pm:971
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr ""

#: network/netconnect.pm:971
#, fuzzy, c-format
msgid "Install a new driver"
msgstr "ติดตั้งระบบ"

#: network/netconnect.pm:983
#, c-format
msgid "Select a device:"
msgstr ""

#: network/netconnect.pm:1008
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:1011 standalone/drakconnect:404
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "โหมดผู้เชี่ยวชาญ"

#: network/netconnect.pm:1012
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:1012
#, fuzzy, c-format
msgid "Managed"
msgstr "เลือกภาษาที่คุณใช้"

#: network/netconnect.pm:1012
#, fuzzy, c-format
msgid "Master"
msgstr "Mouse"

#: network/netconnect.pm:1012
#, fuzzy, c-format
msgid "Repeater"
msgstr "เรียกคืนจากไฟล์"

#: network/netconnect.pm:1012
#, c-format
msgid "Secondary"
msgstr "รอง (Secondary)"

#: network/netconnect.pm:1012
#, c-format
msgid "Auto"
msgstr "อัตโนมัติ"

#: network/netconnect.pm:1014 standalone/drakconnect:405
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:1015 standalone/drakconnect:406
#, fuzzy, c-format
msgid "Network ID"
msgstr "Network interface"

#: network/netconnect.pm:1016 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:1017 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1018 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:1019
#, c-format
msgid "Encryption mode"
msgstr ""

#: network/netconnect.pm:1023 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1024
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1031 standalone/drakconnect:421
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Workstation ที่ทำงาน"

#: network/netconnect.pm:1032 standalone/drakconnect:422
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1033
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1040 standalone/drakconnect:423
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1041
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1050 standalone/drakconnect:424
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1051
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1066
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1070
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1110
#, c-format
msgid "DVB configuration"
msgstr ""

#: network/netconnect.pm:1111
#, c-format
msgid "DVB Adapter"
msgstr ""

#: network/netconnect.pm:1128
#, c-format
msgid "DVB adapter settings"
msgstr ""

#: network/netconnect.pm:1131
#, c-format
msgid "Adapter card"
msgstr ""

#: network/netconnect.pm:1132
#, c-format
msgid "Net demux"
msgstr ""

#: network/netconnect.pm:1133
#, c-format
msgid "PID"
msgstr ""

#: network/netconnect.pm:1161
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"โปรดใส่ชื่อของโฮสต์\n"
"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"

#: network/netconnect.pm:1166
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1168 standalone/drakconnect:992
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "การคอนฟิก"

#: network/netconnect.pm:1168 standalone/drakhosts:194
#, c-format
msgid "Host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:1170
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1171
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1172
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "เซิร์ฟเวอร์ DNS"

#: network/netconnect.pm:1173
#, fuzzy, c-format
msgid "Search domain"
msgstr "โดเมน NIS"

#: network/netconnect.pm:1174
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1175
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: network/netconnect.pm:1177
#, c-format
msgid "Gateway device"
msgstr "อุปกรณ์เกตเวย์"

#: network/netconnect.pm:1186
#, fuzzy, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:1191 standalone/drakconnect:681
#, fuzzy, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"

#: network/netconnect.pm:1204
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1208
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "ชื่อโฮสต์:"

#: network/netconnect.pm:1211
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1221
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: network/netconnect.pm:1234
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: network/netconnect.pm:1249
#, fuzzy, c-format
msgid "Automatically at boot"
msgstr "เริ่มทำงานตอน boot"

#: network/netconnect.pm:1251
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1253
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1262
#, fuzzy, c-format
msgid "How do you want to dial this connection?"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: network/netconnect.pm:1275
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"

#: network/netconnect.pm:1283 standalone/drakconnect:1024
#, c-format
msgid "Testing your connection..."
msgstr "ทดสอบ connection..."

#: network/netconnect.pm:1303
#, fuzzy, c-format
msgid "The system is now connected to the Internet."
msgstr "ติดต่อเข้า Internet เรียบร้อย"

#: network/netconnect.pm:1304
#, fuzzy, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"

#: network/netconnect.pm:1305
#, fuzzy, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"ไม่สามารถต่อเข้า Internet \n"
"ลองทำการคอนฟิกใหม่อีกครั้ง"

#: network/netconnect.pm:1320
#, fuzzy, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
"\n"
"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"

#: network/netconnect.pm:1323
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"

#: network/netconnect.pm:1324
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1335
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "ค้นหาเจอบน port %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1337
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "ค้นพบ %s"

#: network/netconnect.pm:1337
#, fuzzy, c-format
msgid "(detected)"
msgstr "ค้นพบ %s"

#: network/netconnect.pm:1338
#, c-format
msgid "Network Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: network/netconnect.pm:1339
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"

#: network/netconnect.pm:1342
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: network/netconnect.pm:1343
#, fuzzy, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: network/netconnect.pm:1344
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"

#: network/netconnect.pm:1345
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "Xorg ชนิดใหนที่คุณต้องการมี"

#: network/netconnect.pm:1346
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1347
#, fuzzy, c-format
msgid "Internet connection"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: network/netconnect.pm:1364
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:390
#, c-format
msgid "Proxies configuration"
msgstr "การคอนฟิก Proxies"

#: network/network.pm:391
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:392
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:395
#, c-format
msgid "Proxy should be http://..."
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: network/network.pm:396
#, fuzzy, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "ค่าของ Proxy ควรจะเป็น http://..."

#: network/shorewall.pm:54
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/thirdparty.pm:196
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""

#: network/thirdparty.pm:205
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/thirdparty.pm:266
#, fuzzy, c-format
msgid "Could not install the packages (%s)!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: network/thirdparty.pm:274
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr ""

#: network/thirdparty.pm:275
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""

#: network/thirdparty.pm:276
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""

#: network/thirdparty.pm:309
#, fuzzy, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: network/thirdparty.pm:311
#, c-format
msgid "No Windows system has been detected!"
msgstr ""

#: network/thirdparty.pm:321
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: network/thirdparty.pm:322
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"

#: network/thirdparty.pm:332
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: network/thirdparty.pm:342
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/thirdparty.pm:346 network/thirdparty.pm:348
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: network/thirdparty.pm:346
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"

#: network/thirdparty.pm:356
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/thirdparty.pm:361 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "ขอแสดงความยินดี"

#: network/thirdparty.pm:361
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/thirdparty.pm:426
#, c-format
msgid "Looking for required software and drivers..."
msgstr ""

#: network/thirdparty.pm:436
#, fuzzy, c-format
msgid "Please wait, running device configuration commands..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "การเม้าท์ล้มเหลว: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Extended partition not supported on this platform"

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"คุณมีช่องว่างในตารางพาร์ติชั่น  แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: partition_table/raw.pm:252
#, fuzzy, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
"สอบความถูกต้องของข้อมูลได้\n"
"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "ต้องมี"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "สำคัญ"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "ดีมาก"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "ดี"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "อาจจะ"

#: pkgs.pm:458
#, fuzzy, c-format
msgid "Downloading file %s..."
msgstr "บันทึกลงไฟล์"

#: printer/cups.pm:103
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(โมดูล %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr ""

#: printer/cups.pm:115 standalone/printerdrake:188
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "ปรับแต่งการบริการต่างๆ"

#: printer/cups.pm:117
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: printer/cups.pm:117 printer/printerdrake.pm:4761
#: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916
#: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137
#, c-format
msgid " (Default)"
msgstr " (Default)"

#: printer/data.pm:60
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr ""

#: printer/data.pm:61
#, c-format
msgid "PDQ"
msgstr ""

#: printer/data.pm:73
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr ""

#: printer/data.pm:74
#, c-format
msgid "LPD"
msgstr ""

#: printer/data.pm:95
#, c-format
msgid "LPRng - LPR New Generation"
msgstr ""

#: printer/data.pm:96
#, c-format
msgid "LPRng"
msgstr ""

#: printer/data.pm:121
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: printer/data.pm:151
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr ""

#: printer/data.pm:152
#, fuzzy, c-format
msgid "Remote CUPS"
msgstr "Remote CUPS server"

#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
#: printer/detect.pm:478
#, c-format
msgid "Unknown Model"
msgstr ""

#: printer/main.pm:27
#, c-format
msgid "Local printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/main.pm:28
#, c-format
msgid "Remote printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/main.pm:29
#, fuzzy, c-format
msgid "Printer on remote CUPS server"
msgstr "Remote CUPS server"

#: printer/main.pm:30 printer/printerdrake.pm:1150
#: printer/printerdrake.pm:1695
#, fuzzy, c-format
msgid "Printer on remote lpd server"
msgstr "รีโมต lpd"

#: printer/main.pm:31
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/main.pm:32
#, fuzzy, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/main.pm:33
#, fuzzy, c-format
msgid "Printer on NetWare server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/main.pm:34 printer/printerdrake.pm:1699
#, fuzzy, c-format
msgid "Enter a printer device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/main.pm:35
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:45
#, fuzzy, c-format
msgid "recommended"
msgstr "รหัสพื้นที่"

#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174
#, c-format
msgid "Unknown model"
msgstr ""

#: printer/main.pm:354 standalone/printerdrake:187
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "คอนฟิกเม้าส์"

#: printer/main.pm:360 printer/printerdrake.pm:1239
#, c-format
msgid " on parallel port #%s"
msgstr ""

#: printer/main.pm:363 printer/printerdrake.pm:1242
#, c-format
msgid ", USB printer #%s"
msgstr ""

#: printer/main.pm:365
#, fuzzy, c-format
msgid ", USB printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:369
#, fuzzy, c-format
msgid ", HP printer on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:371
#, fuzzy, c-format
msgid ", HP printer on USB"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:373
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ""

#: printer/main.pm:375
#, fuzzy, c-format
msgid ", HP printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:381
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:384
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:386
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:388
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:390
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:394
#, fuzzy, c-format
msgid ", printing to %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: printer/main.pm:397
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:400
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:405
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:410
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:413
#, c-format
msgid ", using command %s"
msgstr ""

#: printer/main.pm:428
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:431 printer/printerdrake.pm:1260
#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
#, fuzzy, c-format
msgid "USB printer #%s"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:433
#, fuzzy, c-format
msgid "USB printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/main.pm:437
#, fuzzy, c-format
msgid "HP printer on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:439
#, fuzzy, c-format
msgid "HP printer on USB"
msgstr "มุมมองสัญลักษ์ของเครื่องพิมพ์"

#: printer/main.pm:441
#, fuzzy, c-format
msgid "HP printer on HP JetDirect"
msgstr "มุมมองสัญลักษ์ของเครื่องพิมพ์"

#: printer/main.pm:443
#, fuzzy, c-format
msgid "HP printer"
msgstr "เครื่องพิมพ์"

#: printer/main.pm:449
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:452
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/main.pm:454
#, c-format
msgid "Multi-function device on USB"
msgstr ""

#: printer/main.pm:456
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:458
#, c-format
msgid "Multi-function device"
msgstr ""

#: printer/main.pm:462
#, fuzzy, c-format
msgid "Prints into %s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: printer/main.pm:465
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/main.pm:468
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:473
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/main.pm:478
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/main.pm:481
#, fuzzy, c-format
msgid "Uses command %s"
msgstr "Port"

#: printer/main.pm:483
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:631 printer/printerdrake.pm:856
#: printer/printerdrake.pm:2953
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: printer/main.pm:1181 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: printer/main.pm:1183 printer/printerdrake.pm:227
#, fuzzy, c-format
msgid "Interface \"%s\""
msgstr "Interface %s"

#: printer/main.pm:1185
#, fuzzy, c-format
msgid "Network %s"
msgstr "Network interface"

#: printer/main.pm:1187
#, fuzzy, c-format
msgid "Host %s"
msgstr "ชื่อโฮสต์:"

#: printer/main.pm:1216
#, fuzzy, c-format
msgid "%s (Port %s)"
msgstr "Port"

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:67
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: printer/printerdrake.pm:82
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "เครื่องพิมพ์"

#: printer/printerdrake.pm:84
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "การคอนฟิก"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, fuzzy, c-format
msgid "No remote machines"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:100
#, fuzzy, c-format
msgid "Additional CUPS servers: "
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:115
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:123
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Boot Style Configuration"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4397
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "เปิด"

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "ปิด"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: printer/printerdrake.pm:188
#, fuzzy, c-format
msgid "Remove selected host/network"
msgstr "ลบคิว"

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, fuzzy, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Remote CUPS server"

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:358
#, fuzzy, c-format
msgid "Add server"
msgstr "เพิ่มผู้ใช้"

#: printer/printerdrake.pm:364
#, fuzzy, c-format
msgid "Edit selected server"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:373
#, fuzzy, c-format
msgid "Remove selected server"
msgstr "ลบคิว"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:422
#, fuzzy, c-format
msgid "Server IP missing!"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:428
#, fuzzy, c-format
msgid "The entered IP is not correct.\n"
msgstr "ถูกต้องหรือไม่?"

#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
#, fuzzy, c-format
msgid "The port number should be an integer!"
msgstr "Port number ควรเป็นตัวเลข"

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Port"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, fuzzy, c-format
msgid "On, Name or IP of remote server:"
msgstr "รีโมต lpd"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4406
#: printer/printerdrake.pm:4472
#, fuzzy, c-format
msgid "CUPS server name or IP address missing."
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
#: printer/printerdrake.pm:4201 printer/printerdrake.pm:4296
#: printer/printerdrake.pm:4302 printer/printerdrake.pm:4326
#: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542
#: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571
#: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784
#: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313
#: standalone/printerdrake:67 standalone/printerdrake:555
#, fuzzy, c-format
msgid "Printerdrake"
msgstr "เครื่องพิมพ์"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
#: printer/printerdrake.pm:4543
#, fuzzy, c-format
msgid "Reading printer data..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:587
#, fuzzy, c-format
msgid "Restarting CUPS..."
msgstr "จำเพาะ"

#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
#, c-format
msgid "Select Printer Connection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:615
#, c-format
msgid "How is the printer connected?"
msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"

#: printer/printerdrake.pm:617
#, fuzzy, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
"ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""

#: printer/printerdrake.pm:620 printer/printerdrake.pm:4786
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:627
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:629
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:635
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:637
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:641
#, fuzzy, c-format
msgid "The timeout must be a positive integer number!"
msgstr "หมายเลขผู้ใช้ควรเป็นเลขจำนวนเต็มบวก"

#: printer/printerdrake.pm:680
#, fuzzy, c-format
msgid "Checking your system..."
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:697
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:699
#, fuzzy, c-format
msgid "and %d unknown printers"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:703
#, fuzzy, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:705
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:706
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: printer/printerdrake.pm:710
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:711
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:714
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:717
#, fuzzy, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:730
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:731
#, fuzzy, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: printer/printerdrake.pm:733
#, fuzzy, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "คุณต้องการต่อตอน boot หรือไม่"

#: printer/printerdrake.pm:734
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:735
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:774
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:833
#, fuzzy, c-format
msgid "Found printer on %s..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:858
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:859
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:860 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
#, fuzzy, c-format
msgid "Printer model selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
#, fuzzy, c-format
msgid "Which printer model do you have?"
msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:875
#, fuzzy, c-format
msgid "Configuring printer on %s..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:885 printer/printerdrake.pm:4563
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
#: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973
#, fuzzy, c-format
msgid "Add a new printer"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:1052
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: printer/printerdrake.pm:1065
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1074
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1082
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1091
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1142
#, fuzzy, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:1145
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: printer/printerdrake.pm:1148
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:1151
#, fuzzy, c-format
msgid "No auto-detection"
msgstr "ใช้ auto detection"

#: printer/printerdrake.pm:1171
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:1209
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
#, fuzzy, c-format
msgid "Printer auto-detection"
msgstr "ใช้ auto detection"

#: printer/printerdrake.pm:1215
#, c-format
msgid "Detecting devices..."
msgstr "กำลังตรวจสอบอุปกรณ์..."

#: printer/printerdrake.pm:1245
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1248
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/printerdrake.pm:1252
#, fuzzy, c-format
msgid "Detected %s"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
#: printer/printerdrake.pm:1302
#, fuzzy, c-format
msgid "Printer on parallel port #%s"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:1263
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: printer/printerdrake.pm:1266
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/วินโดวส์ 95/98/NT"

#: printer/printerdrake.pm:1347
#, fuzzy, c-format
msgid "Local Printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1348
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1352
#, fuzzy, c-format
msgid "You must enter a device or file name!"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:1361
#, fuzzy, c-format
msgid "No printer found!"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1369
#, fuzzy, c-format
msgid "Local Printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1370
#, fuzzy, c-format
msgid "Available printers"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
#, fuzzy, c-format
msgid "The following printer was auto-detected. "
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"

#: printer/printerdrake.pm:1376
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1377
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1380
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1385
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1386
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1389
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1390
#, fuzzy, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:1392
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1393
#, fuzzy, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: printer/printerdrake.pm:1395
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1399
#, fuzzy, c-format
msgid "You must choose/enter a printer/device!"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
#, fuzzy, c-format
msgid "Aborting"
msgstr "เลิก"

#: printer/printerdrake.pm:1475
#, c-format
msgid "Remote lpd Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:1476
#, fuzzy, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"

#: printer/printerdrake.pm:1477
#, fuzzy, c-format
msgid "Remote host name"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1478
#, fuzzy, c-format
msgid "Remote printer name"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:1481
#, fuzzy, c-format
msgid "Remote host name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1485
#, fuzzy, c-format
msgid "Remote printer name missing!"
msgstr "ชื่อโฮสต์รีโมท"

#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
#: standalone/drakTermServ:766 standalone/drakTermServ:782
#: standalone/drakTermServ:1554 standalone/drakTermServ:1563
#: standalone/drakTermServ:1575 standalone/drakbackup:499
#: standalone/drakbackup:605 standalone/drakbackup:640
#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:259
#, c-format
msgid "Information"
msgstr "ข้อมูล"

#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
#: printer/printerdrake.pm:2111
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "ค้นพบ %s"

#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
#, fuzzy, c-format
msgid "Scanning network..."
msgstr "ทดสอบ connection..."

#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:1655
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"

#: printer/printerdrake.pm:1656
#, fuzzy, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"

#: printer/printerdrake.pm:1657
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1659
#, c-format
msgid "SMB server host"
msgstr "ชื่อโฮสต์ของ SMB server"

#: printer/printerdrake.pm:1660
#, c-format
msgid "SMB server IP"
msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"

#: printer/printerdrake.pm:1661
#, c-format
msgid "Share name"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: printer/printerdrake.pm:1664
#, c-format
msgid "Workgroup"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: printer/printerdrake.pm:1666
#, fuzzy, c-format
msgid "Auto-detected"
msgstr "ใช้ auto detection"

#: printer/printerdrake.pm:1676
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1680
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: printer/printerdrake.pm:1686
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: printer/printerdrake.pm:1687
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1697
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1700
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1779
#, c-format
msgid "NetWare Printer Options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"

#: printer/printerdrake.pm:1780
#, fuzzy, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"

#: printer/printerdrake.pm:1781
#, c-format
msgid "Printer Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/printerdrake.pm:1782
#, c-format
msgid "Print Queue Name"
msgstr "ชื่อพรินต์คิว"

#: printer/printerdrake.pm:1787
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1791
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1913
#, fuzzy, c-format
msgid "TCP/Socket Printer Options"
msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"

#: printer/printerdrake.pm:1915
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:1916
#, fuzzy, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"To print to a socket printer, you need to provide the\n"
"hostname of the printer and optionally the port number."

#: printer/printerdrake.pm:1920
#, fuzzy, c-format
msgid "Printer host name or IP missing!"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:1949
#, fuzzy, c-format
msgid "Printer host name or IP"
msgstr "ชื่อของเครื่องพิมพ์"

#: printer/printerdrake.pm:2012
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
#, c-format
msgid "Printer Device URI"
msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#: printer/printerdrake.pm:2016
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:2042
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:2147
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:2148
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2149
#, c-format
msgid "Command line"
msgstr "บรรทัดคำสั่ง"

#: printer/printerdrake.pm:2153
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:2192
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2194
#, c-format
msgid ""
"To access these extra functions on your HP printer, it must be set up with "
"the appropriate software: "
msgstr ""

#: printer/printerdrake.pm:2195
#, c-format
msgid ""
"Either with the newer HPLIP which allows printer maintenance through the "
"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
"newer PhotoSmart models "
msgstr ""

#: printer/printerdrake.pm:2196
#, c-format
msgid ""
"or with the older HPOJ which allows only scanner and memory card access, but "
"could help you in case of failure of HPLIP. "
msgstr ""

#: printer/printerdrake.pm:2198
#, c-format
msgid "What is your choice (choose \"None\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
#: printer/printerdrake.pm:2258
#, fuzzy, c-format
msgid "HPLIP"
msgstr "PL_IP"

#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
#: printer/printerdrake.pm:2375
#, c-format
msgid "HPOJ"
msgstr ""

#: printer/printerdrake.pm:2207
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
#, fuzzy, c-format
msgid "Installing %s package..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2248
#, fuzzy, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr "ไม่สามารถสร้างโฟลเดอร์เก็บค่าปรับ gnome ส่วนตัวที่ '%s': %s\n"

#: printer/printerdrake.pm:2250
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
#, c-format
msgid "Checking device and configuring %s..."
msgstr ""

#: printer/printerdrake.pm:2277
#, fuzzy, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"

#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
#, fuzzy, c-format
msgid "Installing SANE packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2334
#, c-format
msgid "Using and Maintaining your %s"
msgstr ""

#: printer/printerdrake.pm:2459
#, fuzzy, c-format
msgid "Installing mtools packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:2467
#, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2483
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2492
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2509
#, fuzzy, c-format
msgid "Configuring device..."
msgstr "กำลังทำการคอนฟิก"

#: printer/printerdrake.pm:2543
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
#: printer/printerdrake.pm:2949
#, fuzzy, c-format
msgid "Reading printer database..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:2763
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: printer/printerdrake.pm:2780
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""

#: printer/printerdrake.pm:2789
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: printer/printerdrake.pm:2790
#, c-format
msgid "Name of printer"
msgstr "ชื่อเครื่องพิมพ์"

#: printer/printerdrake.pm:2791 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Description"
msgstr "รายละเอียด"

#: printer/printerdrake.pm:2792 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "Location"
msgstr "ตำแหน่ง"

#: printer/printerdrake.pm:2810
#, fuzzy, c-format
msgid "Preparing printer database..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:2927
#, fuzzy, c-format
msgid "Your printer model"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:2928
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
#, fuzzy, c-format
msgid "The model is correct"
msgstr "ถูกต้องหรือไม่?"

#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
#: printer/printerdrake.pm:2938
#, fuzzy, c-format
msgid "Select model manually"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:2962
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:2981
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:3013
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:3014
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:3015
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:3016
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:3017
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:3018
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:3020
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "ติดตั้ง"

#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "บันทึกลงแผ่นฟล้อปปี้"

#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, fuzzy, c-format
msgid "Other place"
msgstr "กำลังตรวจสอบพอร์ต"

#: printer/printerdrake.pm:3039
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "เลือกไฟล์"

#: printer/printerdrake.pm:3043
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:3049
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:3060
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:3178
#, fuzzy, c-format
msgid "OKI winprinter configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:3179
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
#, fuzzy, c-format
msgid "Lexmark inkjet configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:3205
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3235
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3245
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:3246
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:3268
#, fuzzy, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "การปรับแต่ง LAN"

#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:3295
#, fuzzy, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "การคอนฟิก"

#: printer/printerdrake.pm:3314
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3464
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3589
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:3596
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: printer/printerdrake.pm:3600
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: printer/printerdrake.pm:3604
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3656
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: printer/printerdrake.pm:3672
#, fuzzy, c-format
msgid "Test pages"
msgstr "กำลังตรวจสอบพอร์ต"

#: printer/printerdrake.pm:3673
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3677
#, fuzzy, c-format
msgid "No test pages"
msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"

#: printer/printerdrake.pm:3678
#, c-format
msgid "Print"
msgstr "พิมพ์"

#: printer/printerdrake.pm:3703
#, fuzzy, c-format
msgid "Standard test page"
msgstr "เครื่องมีอ Standard"

#: printer/printerdrake.pm:3706
#, c-format
msgid "Alternative test page (Letter)"
msgstr ""

#: printer/printerdrake.pm:3709
#, fuzzy, c-format
msgid "Alternative test page (A4)"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3711
#, fuzzy, c-format
msgid "Photo test page"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3715
#, fuzzy, c-format
msgid "Do not print any test page"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
#, c-format
msgid "Printing test page(s)..."
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3743
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:3760
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"สถานะการพิมพ์:\n"
"%s\n"
"\n"
"มันทำงานถูกต้องใหมครับ"

#: printer/printerdrake.pm:3764
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
"กรุณารอสักครู่\n"
"มันทำงานถูกต้องใหมครับ"

#: printer/printerdrake.pm:3774
#, c-format
msgid "Did it work properly?"
msgstr ""

#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175
#, c-format
msgid "Raw printer"
msgstr "เครื่องพิมพ์ธรรมดา"

#: printer/printerdrake.pm:3836
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:3838
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
#: printer/printerdrake.pm:3868
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3848
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
#: printer/printerdrake.pm:3875
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: printer/printerdrake.pm:3873
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3877
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:3881
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:3891
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3892
#, fuzzy, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3894
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3896
#, fuzzy, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3897
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:3903
#, fuzzy, c-format
msgid "Print option list"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: printer/printerdrake.pm:3925
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3928
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:3929
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3933
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""

#: printer/printerdrake.pm:3934
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3936
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:3937
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3940
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3941
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:3942
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:3943
#, c-format
msgid " - Print head alignment\n"
msgstr ""

#: printer/printerdrake.pm:3944
#, fuzzy, c-format
msgid " - Color calibration\n"
msgstr "การคอนฟิก"

#: printer/printerdrake.pm:3959
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"You do not need to run \"scannerdrake\" for setting up scanning on this "
"device, you only need to use \"scannerdrake\" if you want to share the "
"scanner on the network."
msgstr ""

#: printer/printerdrake.pm:3985
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
#: printer/printerdrake.pm:4090
#, fuzzy, c-format
msgid "Transfer printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:4029
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:4032
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:4034
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:4036
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:4038
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4039
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4040
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: printer/printerdrake.pm:4043
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
#, c-format
msgid "Transfer"
msgstr ""

#: printer/printerdrake.pm:4056
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:4077
#, fuzzy, c-format
msgid "New printer name"
msgstr "ไม่มีเครื่องพิมพ์"

#: printer/printerdrake.pm:4080
#, c-format
msgid "Transferring %s..."
msgstr ""

#: printer/printerdrake.pm:4091
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4101
#, fuzzy, c-format
msgid "Refreshing printer data..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:4111
#, fuzzy, c-format
msgid "Starting network..."
msgstr "ทดสอบ connection..."

#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
#: printer/printerdrake.pm:4161
#, fuzzy, c-format
msgid "Configure the network now"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4156
#, fuzzy, c-format
msgid "Network functionality not configured"
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: printer/printerdrake.pm:4157
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:4160
#, fuzzy, c-format
msgid "Go on without configuring the network"
msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4191
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""

#: printer/printerdrake.pm:4192
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:4202
#, fuzzy, c-format
msgid "Restarting printing system..."
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:4233
#, fuzzy, c-format
msgid "high"
msgstr "สูง"

#: printer/printerdrake.pm:4233
#, fuzzy, c-format
msgid "paranoid"
msgstr "Paranoid"

#: printer/printerdrake.pm:4235
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: printer/printerdrake.pm:4236
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:4272
#, fuzzy, c-format
msgid "Starting the printing system at boot time"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:4273
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:4296
#, c-format
msgid "Checking installed software..."
msgstr ""

#: printer/printerdrake.pm:4302
#, fuzzy, c-format
msgid "Removing %s..."
msgstr "ความละเอียดของภาพ %s\n"

#: printer/printerdrake.pm:4306
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4326
#, fuzzy, c-format
msgid "Installing %s..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:4330
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4398
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4400
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4414
#, fuzzy, c-format
msgid "Name or IP of remote server:"
msgstr "รีโมต lpd"

#: printer/printerdrake.pm:4434
#, fuzzy, c-format
msgid "Setting Default Printer..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:4454
#, fuzzy, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "Remote CUPS server"

#: printer/printerdrake.pm:4455
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:4457
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:4458
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4459
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4461
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4462
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4463
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4465
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484
#: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4483
#, fuzzy, c-format
msgid "Local CUPS printing system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4522
#, fuzzy, c-format
msgid "Select Printer Spooler"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:4523
#, fuzzy, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"

#: printer/printerdrake.pm:4572
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "การคอนฟิกเครื่องพิมพ์"

#: printer/printerdrake.pm:4587
#, fuzzy, c-format
msgid "Installing Foomatic..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"

#: printer/printerdrake.pm:4593
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4785
#, fuzzy, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"

#: printer/printerdrake.pm:4815
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: printer/printerdrake.pm:4816
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: printer/printerdrake.pm:4827
#, fuzzy, c-format
msgid "CUPS configuration"
msgstr "การปรับแต่ง LAN"

#: printer/printerdrake.pm:4839
#, fuzzy, c-format
msgid "Change the printing system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: printer/printerdrake.pm:4848
#, c-format
msgid "Normal Mode"
msgstr "โหมดธรรมดา"

#: printer/printerdrake.pm:4849
#, c-format
msgid "Expert Mode"
msgstr "โหมดผู้เชี่ยวชาญ"

#: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176
#: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264
#, c-format
msgid "Printer options"
msgstr "อ๊อปชั่นของเครื่องพิมพ์"

#: printer/printerdrake.pm:5154
#, fuzzy, c-format
msgid "Modify printer configuration"
msgstr "การคอนฟิก Internet"

#: printer/printerdrake.pm:5156
#, fuzzy, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: printer/printerdrake.pm:5161
#, fuzzy, c-format
msgid "This printer is disabled"
msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"

#: printer/printerdrake.pm:5163
#, c-format
msgid "Do it!"
msgstr ""

#: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223
#, fuzzy, c-format
msgid "Printer connection type"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229
#, fuzzy, c-format
msgid "Printer name, description, location"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265
#: printer/printerdrake.pm:5267
#, fuzzy, c-format
msgid "Enable Printer"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270
#: printer/printerdrake.pm:5272
#, fuzzy, c-format
msgid "Disable Printer"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275
#, fuzzy, c-format
msgid "Print test pages"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279
#, fuzzy, c-format
msgid "Remove printer"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: printer/printerdrake.pm:5237
#, fuzzy, c-format
msgid "Removing old printer \"%s\"..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:5268
#, fuzzy, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"

#: printer/printerdrake.pm:5273
#, fuzzy, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: printer/printerdrake.pm:5310
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: printer/printerdrake.pm:5314
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "อ่าน CUPS drivers database..."

#: printer/printerdrake.pm:5338
#, fuzzy, c-format
msgid "Default printer"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: printer/printerdrake.pm:5339
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: raid.pm:41
#, fuzzy, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"

#: raid.pm:144
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, fuzzy, c-format
msgid "Scannerdrake"
msgstr "เลือกกราฟฟิคการ์ด"

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/help.pm:31
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:213
#, fuzzy, c-format
msgid "Security Alerts:"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "ไม่มีรหัสผ่าน"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, fuzzy, c-format
msgid "Set the user umask."
msgstr "ชื่อผู้ใช้"

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "การติดต่อโดยใช้ Modem ธรรมดา"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "ปรับแต่งการบริการต่างๆ"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, fuzzy, c-format
msgid "No password aging for"
msgstr "ไม่มีรหัสผ่าน"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, fuzzy, c-format
msgid "Password history length"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, fuzzy, c-format
msgid "Root umask"
msgstr "ไม่มีรหัสผ่าน"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "Kernel Boot Timeout"

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "User umask"
msgstr "ชื่อผู้ใช้"

#: security/l10n.pm:45
#, fuzzy, c-format
msgid "Check open ports"
msgstr "ค้นหาเจอบน port %s"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Welcome To Crackers"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "ต่ำกว่ามาตรฐาน"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "สูง"

#: security/level.pm:14
#, fuzzy, c-format
msgid "Higher"
msgstr "สูง"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Paranoid"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr ""

#: security/level.pm:56
#, fuzzy, c-format
msgid "Please choose the desired security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: security/level.pm:60
#, fuzzy, c-format
msgid "Security level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: security/level.pm:62
#, fuzzy, c-format
msgid "Use libsafe for servers"
msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr ""

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd คือโปรแกรมดูแลสถานะของ battery \n"
"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
"ด้วย"

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr "Apache คือ World Wide Web server"

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
"เมื่อมีความต้องการเกิดขึ้น  ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
"ftp rsh และ rlogin  การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
"ผิดชอบอยู่ไม่ทำงาน"

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"แพกเกจนี้จะเรียกใช้ keyboard map ตามที่ระบุอยู่ใน \n"
"/etc/sysconfig/keyboard  ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: services.pm:54
#, fuzzy, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
"host names เป็น IP addresses."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
"เริ่มทำงานตอน boot"

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
"มันให้การทำงานของNFS server "

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"

#: services.pm:73
#, fuzzy, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
"ไปอีกเครื่องหนึ่ง"

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""

#: services.pm:87
#, fuzzy, c-format
msgid "Launch the sound system on your machine"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr ""

#: services.pm:91
#, fuzzy, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"

#: services.pm:127
#, c-format
msgid "Printing"
msgstr "กำลังพิมพ์"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr ""

#: services.pm:138
#, fuzzy, c-format
msgid "Remote Administration"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: services.pm:146
#, fuzzy, c-format
msgid "Database Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: services.pm:209
#, c-format
msgid "running"
msgstr "กำลังทำงาน"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "หยุด"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr ""

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"ไม่มีข้อมูลเพิ่มเติม\n"
"สำหรับการบริการนี้ ขอโทษครับ"

#: services.pm:224 ugtk2.pm:1026
#, c-format
msgid "Info"
msgstr "ข้อมูล"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "ขณะ boot"

#: services.pm:244 standalone/drakroam:185
#, c-format
msgid "Start"
msgstr "เริ่ม"

#: services.pm:244 standalone/drakroam:186
#, c-format
msgid "Stop"
msgstr "หยุด"

#: share/advertising/01.pl:13
#, c-format
msgid "<b>What is Mandriva Linux?</b>"
msgstr ""

#: share/advertising/01.pl:15
#, fuzzy, c-format
msgid "Welcome to <b>Mandriva Linux</b>!"
msgstr "แบบผู้เชี่ยวชาญ (Expert)"

#: share/advertising/01.pl:17
#, c-format
msgid ""
"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
"system, called the <b>operating system</b> (based on the Linux kernel) "
"together with <b>a lot of applications</b> meeting every need you could even "
"think of."
msgstr ""

#: share/advertising/01.pl:19
#, c-format
msgid ""
"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
"is also one of the <b>most widely used</b> Linux distributions worldwide!"
msgstr ""

#: share/advertising/02.pl:13
#, c-format
msgid "<b>Open Source</b>"
msgstr ""

#: share/advertising/02.pl:15
#, fuzzy, c-format
msgid "Welcome to the <b>world of open source</b>!"
msgstr "ทดสอบการคอนฟิก"

#: share/advertising/02.pl:17
#, c-format
msgid ""
"Mandriva Linux is committed to the open source model. This means that this "
"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
"contributors."
msgstr ""

#: share/advertising/02.pl:19
#, c-format
msgid ""
"We would like to <b>thank</b> everyone who participated in the development "
"of this latest release."
msgstr ""

#: share/advertising/03.pl:13
#, c-format
msgid "<b>The GPL</b>"
msgstr ""

#: share/advertising/03.pl:15
#, c-format
msgid ""
"Most of the software included in the distribution and all of the Mandriva "
"Linux tools are licensed under the <b>General Public License</b>."
msgstr ""

#: share/advertising/03.pl:17
#, c-format
msgid ""
"The GPL is at the heart of the open source model; it grants everyone the "
"<b>freedom</b> to use, study, distribute and improve the software any way "
"they want, provided they make the results available."
msgstr ""

#: share/advertising/03.pl:19
#, c-format
msgid ""
"The main benefit of this is that the number of developers is virtually "
"<b>unlimited</b>, resulting in <b>very high quality</b> software."
msgstr ""

#: share/advertising/04.pl:13
#, c-format
msgid "<b>Join the Community</b>"
msgstr ""

#: share/advertising/04.pl:15
#, c-format
msgid ""
"Mandriva Linux has one of the <b>biggest communities</b> of users and "
"developers. The role of such a community is very wide, ranging from bug "
"reporting to the development of new applications. The community plays a "
"<b>key role</b> in the Mandriva Linux world."
msgstr ""

#: share/advertising/04.pl:17
#, c-format
msgid ""
"To <b>learn more</b> about our dynamic community, please visit <b>www."
"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
"php3</b> if you would like to get <b>involved</b> in the development."
msgstr ""

#: share/advertising/05.pl:15
#, c-format
msgid "<b>Download Version</b>"
msgstr ""

#: share/advertising/05.pl:17
#, c-format
msgid ""
"You are now installing <b>Mandriva Linux Download</b>. This is the free "
"version that Mandriva wants to keep <b>available to everyone</b>."
msgstr ""

#: share/advertising/05.pl:19
#, c-format
msgid ""
"The Download version <b>cannot include</b> all the software that is not open "
"source. Therefore, you will not find in the Download version:"
msgstr ""

#: share/advertising/05.pl:20
#, c-format
msgid ""
"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
msgstr ""

#: share/advertising/05.pl:21
#, c-format
msgid ""
"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
"Flash™, etc.)."
msgstr ""

#: share/advertising/05.pl:23
#, c-format
msgid ""
"You will not have access to the <b>services included</b> in the other "
"Mandriva products either."
msgstr ""

#: share/advertising/06.pl:13
#, c-format
msgid "<b>Discovery, Your First Linux Desktop</b>"
msgstr ""

#: share/advertising/06.pl:15
#, c-format
msgid "You are now installing <b>Mandriva Linux Discovery</b>."
msgstr ""

#: share/advertising/06.pl:17
#, c-format
msgid ""
"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
"distribution. It includes a hand-picked selection of <b>premium software</b> "
"for office, multimedia and Internet activities. Its menu is task-oriented, "
"with a single application per task."
msgstr ""

#: share/advertising/07.pl:13
#, c-format
msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
msgstr ""

#: share/advertising/07.pl:15
#, c-format
msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
msgstr ""

#: share/advertising/07.pl:17
#, c-format
msgid ""
"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
"includes <b>thousands of applications</b> - everything from the most popular "
"to the most advanced."
msgstr ""

#: share/advertising/08.pl:13
#, c-format
msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
msgstr ""

#: share/advertising/08.pl:15
#, c-format
msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
msgstr ""

#: share/advertising/08.pl:17
#, c-format
msgid ""
"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
"applications</b> and a comprehensive selection of world-class <b>server "
"applications</b>."
msgstr ""

#: share/advertising/09.pl:13
#, fuzzy, c-format
msgid "<b>Mandriva Products</b>"
msgstr "Control Center"

#: share/advertising/09.pl:15
#, c-format
msgid ""
"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
msgstr ""

#: share/advertising/09.pl:17
#, c-format
msgid "The Mandriva Linux products are:"
msgstr ""

#: share/advertising/09.pl:18
#, c-format
msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
msgstr ""

#: share/advertising/09.pl:19
#, c-format
msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
msgstr ""

#: share/advertising/09.pl:20
#, c-format
msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
msgstr ""

#: share/advertising/09.pl:21
#, c-format
msgid ""
"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
"the most of your 64-bit processor."
msgstr ""

#: share/advertising/10.pl:15
#, c-format
msgid "<b>Mandriva Products (Nomad Products)</b>"
msgstr ""

#: share/advertising/10.pl:17
#, c-format
msgid ""
"Mandriva has developed two products that allow you to use Mandriva Linux "
"<b>on any computer</b> and without any need to actually install it:"
msgstr ""

#: share/advertising/10.pl:18
#, c-format
msgid ""
"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
"bootable CD-ROM."
msgstr ""

#: share/advertising/10.pl:19
#, c-format
msgid ""
"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
"ultra-compact “LaCie Mobile Hard Drive”."
msgstr ""

#: share/advertising/11.pl:13
#, c-format
msgid "<b>Mandriva Products (Professional Solutions)</b>"
msgstr ""

#: share/advertising/11.pl:15
#, c-format
msgid ""
"Below are the Mandriva products designed to meet the <b>professional needs</"
"b>:"
msgstr ""

#: share/advertising/11.pl:16
#, c-format
msgid ""
"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
msgstr ""

#: share/advertising/11.pl:17
#, c-format
msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
msgstr ""

#: share/advertising/11.pl:18
#, c-format
msgid ""
"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
msgstr ""

#: share/advertising/12.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr ""

#: share/advertising/12.pl:15
#, c-format
msgid ""
"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
"and user-friendly <b>graphical desktop environment</b> available."
msgstr ""

#: share/advertising/12.pl:17
#, c-format
msgid ""
"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
"will not ever think of running another operating system!"
msgstr ""

#: share/advertising/12.pl:19
#, c-format
msgid ""
"KDE also includes a lot of <b>well integrated applications</b> such as "
"Konqueror, the web browser and Kontact, the personal information manager."
msgstr ""

#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
#, fuzzy, c-format
msgid "<b>Choose your Favorite Desktop Environment</b>"
msgstr "Graphical Desktops อื่นๆ"

#: share/advertising/13-a.pl:15
#, c-format
msgid ""
"With PowerPack, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
#, c-format
msgid ""
"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
"desktop environment available. It includes a lot of integrated applications."
msgstr ""

#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
#, c-format
msgid ""
"But we advise you to try all available ones (including <b>GNOME</b>, "
"<b>IceWM</b>, etc.) and pick your favorite."
msgstr ""

#: share/advertising/13-b.pl:15
#, c-format
msgid ""
"With PowerPack+, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/14.pl:15
#, fuzzy, c-format
msgid "<b>OpenOffice.org</b>"
msgstr "OpenOffice.org Math"

#: share/advertising/14.pl:17
#, c-format
msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/14.pl:19
#, c-format
msgid ""
"It is a <b>full-featured office suite</b> that includes word processor, "
"spreadsheet, presentation and drawing applications."
msgstr ""

#: share/advertising/14.pl:21
#, c-format
msgid ""
"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
"documents such as Word, Excel and PowerPoint® files."
msgstr ""

#: share/advertising/15.pl:13
#, c-format
msgid "<b>Kontact</b>"
msgstr ""

#: share/advertising/15.pl:15
#, c-format
msgid ""
"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
msgstr ""

#: share/advertising/15.pl:17
#, c-format
msgid ""
"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
"b>!"
msgstr ""

#: share/advertising/15.pl:19
#, c-format
msgid ""
"It is the easiest way to communicate with your contacts and to organize your "
"time."
msgstr ""

#: share/advertising/16.pl:13
#, fuzzy, c-format
msgid "<b>Surf the Internet</b>"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"

#: share/advertising/16.pl:15
#, c-format
msgid "Discovery will give you access to <b>every Internet resource</b>:"
msgstr ""

#: share/advertising/16.pl:16
#, c-format
msgid "\t* Browse the <b>Web</b> with Konqueror."
msgstr ""

#: share/advertising/16.pl:17
#, c-format
msgid "\t* <b>Chat</b> online with your friends using Kopete."
msgstr ""

#: share/advertising/16.pl:18
#, c-format
msgid "\t* <b>Transfer</b> files with KBear."
msgstr ""

#: share/advertising/16.pl:19 share/advertising/17.pl:19
#: share/advertising/18.pl:22
#, c-format
msgid "\t* ..."
msgstr ""

#: share/advertising/17.pl:13
#, c-format
msgid "<b>Enjoy our Multimedia Features</b>"
msgstr ""

#: share/advertising/17.pl:15
#, c-format
msgid "Discovery will also make <b>multimedia</b> very easy for you:"
msgstr ""

#: share/advertising/17.pl:16
#, c-format
msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
msgstr ""

#: share/advertising/17.pl:17
#, c-format
msgid "\t* Listen to your <b>music files</b> with amaroK."
msgstr ""

#: share/advertising/17.pl:18
#, c-format
msgid "\t* Edit and create <b>images</b> with the GIMP."
msgstr ""

#: share/advertising/18.pl:13
#, c-format
msgid "<b>Enjoy the Wide Range of Applications</b>"
msgstr ""

#: share/advertising/18.pl:15
#, c-format
msgid ""
"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
"<b>all of your tasks</b>:"
msgstr ""

#: share/advertising/18.pl:16
#, c-format
msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/18.pl:17
#, c-format
msgid ""
"\t* Manage your personal data with the integrated personal information "
"suites <b>Kontact</b> and <b>Evolution</b>."
msgstr ""

#: share/advertising/18.pl:18
#, c-format
msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
msgstr ""

#: share/advertising/18.pl:19
#, c-format
msgid "\t* Participate in online chat with <b>Kopete</b>."
msgstr ""

#: share/advertising/18.pl:20
#, c-format
msgid ""
"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
"<b>videos</b>."
msgstr ""

#: share/advertising/18.pl:21
#, c-format
msgid "\t* Edit and create images with the <b>GIMP</b>."
msgstr ""

#: share/advertising/19.pl:13
#, c-format
msgid "<b>Development Environments</b>"
msgstr "<b>รูปแบบการพัฒนาโปรแกรม</b>"

#: share/advertising/19.pl:15 share/advertising/22.pl:17
#, c-format
msgid ""
"PowerPack gives you the best tools to <b>develop</b> your own applications."
msgstr ""

#: share/advertising/19.pl:17
#, c-format
msgid ""
"You will enjoy the powerful, integrated development environment from KDE, "
"<b>KDevelop</b>, which will let you program in a lot of languages."
msgstr ""

#: share/advertising/19.pl:19
#, c-format
msgid ""
"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
"b>, the associated debugger."
msgstr ""

#: share/advertising/20.pl:13
#, fuzzy, c-format
msgid "<b>Development Editors</b>"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: share/advertising/20.pl:15
#, c-format
msgid "PowerPack will let you choose between those <b>popular editors</b>:"
msgstr ""

#: share/advertising/20.pl:16
#, c-format
msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
msgstr ""

#: share/advertising/20.pl:17
#, c-format
msgid ""
"\t* <b>XEmacs</b>: another open source text editor and application "
"development system."
msgstr ""

#: share/advertising/20.pl:18
#, c-format
msgid ""
"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
msgstr ""

#: share/advertising/21.pl:15
#, fuzzy, c-format
msgid "<b>Development Languages</b>"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: share/advertising/21.pl:17
#, c-format
msgid ""
"With all these <b>powerful tools</b>, you will be able to write applications "
"in <b>dozens of programming languages</b>:"
msgstr ""

#: share/advertising/21.pl:18
#, c-format
msgid "\t* The famous <b>C language</b>."
msgstr ""

#: share/advertising/21.pl:19
#, c-format
msgid "\t* Object oriented languages:"
msgstr ""

#: share/advertising/21.pl:20
#, c-format
msgid "\t\t* <b>C++</b>"
msgstr ""

#: share/advertising/21.pl:21
#, c-format
msgid "\t\t* <b>Java™</b>"
msgstr ""

#: share/advertising/21.pl:22
#, fuzzy, c-format
msgid "\t* Scripting languages:"
msgstr "เครื่องมือจัดการการพิมพ์"

#: share/advertising/21.pl:23
#, c-format
msgid "\t\t* <b>Perl</b>"
msgstr ""

#: share/advertising/21.pl:24
#, c-format
msgid "\t\t* <b>Python</b>"
msgstr ""

#: share/advertising/21.pl:25 share/advertising/28.pl:24
#, c-format
msgid "\t* And many more."
msgstr ""

#: share/advertising/22.pl:15
#, fuzzy, c-format
msgid "<b>Development Tools</b>"
msgstr "พัฒนาซอฟท์แวร์ (Development)"

#: share/advertising/22.pl:19
#, c-format
msgid ""
"With the powerful integrated development environment <b>KDevelop</b> and the "
"leading Linux compiler <b>GCC</b>, you will be able to create applications "
"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
msgstr ""

#: share/advertising/23.pl:13
#, c-format
msgid "<b>Groupware Server</b>"
msgstr ""

#: share/advertising/23.pl:15
#, c-format
msgid ""
"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
"allow you to:"
msgstr ""

#: share/advertising/23.pl:16
#, c-format
msgid "\t* Send and receive your <b>e-mails</b>."
msgstr ""

#: share/advertising/23.pl:17
#, c-format
msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
msgstr ""

#: share/advertising/23.pl:18
#, c-format
msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
msgstr ""

#: share/advertising/24.pl:15
#, fuzzy, c-format
msgid "<b>Servers</b>"
msgstr "Driver"

#: share/advertising/24.pl:17
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/24.pl:18
#, c-format
msgid ""
"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
msgstr ""

#: share/advertising/24.pl:19
#, c-format
msgid "\t* <b>Apache</b>: The most widely used web server."
msgstr ""

#: share/advertising/24.pl:20
#, c-format
msgid ""
"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
"databases."
msgstr ""

#: share/advertising/24.pl:21
#, c-format
msgid ""
"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
"transparent version control system."
msgstr ""

#: share/advertising/24.pl:22
#, c-format
msgid ""
"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
msgstr ""

#: share/advertising/24.pl:23
#, c-format
msgid ""
"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
"servers."
msgstr ""

#: share/advertising/25.pl:13
#, fuzzy, c-format
msgid "<b>Mandriva Linux Control Center</b>"
msgstr "Control Center"

#: share/advertising/25.pl:15
#, c-format
msgid ""
"The <b>Mandriva Linux Control Center</b> is an essential collection of "
"Mandriva Linux-specific utilities designed to simplify the configuration of "
"your computer."
msgstr ""

#: share/advertising/25.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of <b>more than 60</b> handy "
"utilities for <b>easily configuring your system</b>: hardware devices, mount "
"points, network and Internet, security level of your computer, etc."
msgstr ""

#: share/advertising/26.pl:13
#, c-format
msgid "<b>The Open Source Model</b>"
msgstr ""

#: share/advertising/26.pl:15
#, c-format
msgid ""
"Like all computer programming, open source software <b>requires time and "
"people</b> for development. In order to respect the open source philosophy, "
"Mandriva sells added value products and services to <b>keep improving "
"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
"and the development of Mandriva Linux, <b>please</b> consider buying one of "
"our products or services!"
msgstr ""

#: share/advertising/27.pl:13
#, fuzzy, c-format
msgid "<b>Online Store</b>"
msgstr "Control Center"

#: share/advertising/27.pl:15
#, c-format
msgid ""
"To learn more about Mandriva products and services, you can visit our <b>e-"
"commerce platform</b>."
msgstr ""

#: share/advertising/27.pl:17
#, c-format
msgid "There you can find all our products, services and third-party products."
msgstr ""

#: share/advertising/27.pl:19
#, c-format
msgid ""
"This platform has just been <b>redesigned</b> to improve its efficiency and "
"usability."
msgstr ""

#: share/advertising/27.pl:21
#, c-format
msgid "Stop by today at <b>store.mandriva.com</b>!"
msgstr ""

#: share/advertising/28.pl:15
#, fuzzy, c-format
msgid "<b>Mandriva Club</b>"
msgstr "Control Center"

#: share/advertising/28.pl:17
#, c-format
msgid ""
"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
"product.."
msgstr ""

#: share/advertising/28.pl:19
#, c-format
msgid ""
"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
msgstr ""

#: share/advertising/28.pl:20
#, c-format
msgid ""
"\t* <b>Special discounts</b> on products and services of our online store "
"<b>store.mandriva.com</b>."
msgstr ""

#: share/advertising/28.pl:21
#, c-format
msgid ""
"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
"drivers)."
msgstr ""

#: share/advertising/28.pl:22
#, c-format
msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
msgstr ""

#: share/advertising/28.pl:23
#, c-format
msgid ""
"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
"Linux <b>ISO images</b>."
msgstr ""

#: share/advertising/29.pl:13
#, fuzzy, c-format
msgid "<b>Mandriva Online</b>"
msgstr "Control Center"

#: share/advertising/29.pl:15
#, c-format
msgid ""
"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
"offer its customers!"
msgstr ""

#: share/advertising/29.pl:17
#, c-format
msgid ""
"Mandriva Online provides a wide range of valuable services for <b>easily "
"updating</b> your Mandriva Linux systems:"
msgstr ""

#: share/advertising/29.pl:18
#, c-format
msgid "\t* <b>Perfect</b> system security (automated software updates)."
msgstr ""

#: share/advertising/29.pl:19
#, c-format
msgid ""
"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
"desktop)."
msgstr ""

#: share/advertising/29.pl:20
#, c-format
msgid "\t* Flexible <b>scheduled</b> updates."
msgstr ""

#: share/advertising/29.pl:21
#, c-format
msgid ""
"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
msgstr ""

#: share/advertising/30.pl:13
#, fuzzy, c-format
msgid "<b>Mandriva Expert</b>"
msgstr "Control Center"

#: share/advertising/30.pl:15
#, c-format
msgid ""
"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
"<b>our technical support platform</b> www.mandrivaexpert.com."
msgstr ""

#: share/advertising/30.pl:17
#, c-format
msgid ""
"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
"a lot of time."
msgstr ""

#: share/advertising/30.pl:19
#, c-format
msgid ""
"For any question related to Mandriva Linux, you have the possibility to "
"purchase support incidents at <b>store.mandriva.com</b>."
msgstr ""

#: share/compssUsers.pl:26
#, c-format
msgid "Office Workstation"
msgstr "Workstation ที่ทำงาน"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

#: share/compssUsers.pl:34
#, fuzzy, c-format
msgid "Game station"
msgstr "Workstation ที่ทำงาน"

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

#: share/compssUsers.pl:38
#, fuzzy, c-format
msgid "Multimedia station"
msgstr "Multimedia - เขียน CD "

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr ""

#: share/compssUsers.pl:44
#, fuzzy, c-format
msgid "Internet station"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: share/compssUsers.pl:45
#, fuzzy, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"

#: share/compssUsers.pl:50
#, fuzzy, c-format
msgid "Network Computer (client)"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "Clients for different protocols including ssh"

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "ปรับแต่งค่า"

#: share/compssUsers.pl:56
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "เครืองมือที่ช่วยในการปรับแต่งเครื่องชองคุณให้ง่ายขึ้น"

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr ""

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr ""

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr ""

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "คู่มือ"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr ""

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: share/compssUsers.pl:86
#, c-format
msgid "Apache"
msgstr ""

#: share/compssUsers.pl:89
#, fuzzy, c-format
msgid "Groupware"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: share/compssUsers.pl:90
#, fuzzy, c-format
msgid "Kolab Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Firewall/Router"
msgstr ""

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, fuzzy, c-format
msgid "Internet gateway"
msgstr "การติดต่อ internet"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/ไฟล์/_ใหม่"

#: share/compssUsers.pl:98
#, fuzzy, c-format
msgid "Postfix mail server, Inn news server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: share/compssUsers.pl:101
#, fuzzy, c-format
msgid "Directory Server"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: share/compssUsers.pl:105
#, fuzzy, c-format
msgid "FTP Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:109
#, fuzzy, c-format
msgid "DNS/NIS"
msgstr "ใช้ NIS"

#: share/compssUsers.pl:110
#, fuzzy, c-format
msgid "Domain Name and Network Information Server"
msgstr "ชื่อโดเมน"

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "File and Printer Sharing Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: share/compssUsers.pl:114
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "เซิร์ฟเวอร์ NIS"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "ฐานข้อมูล"

#: share/compssUsers.pl:118
#, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr ""

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr ""

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr ""

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "จดหมาย"

#: share/compssUsers.pl:127
#, fuzzy, c-format
msgid "Postfix mail server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: share/compssUsers.pl:138
#, fuzzy, c-format
msgid "Network Computer server"
msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: share/compssUsers.pl:147
#, fuzzy, c-format
msgid "KDE Workstation"
msgstr "Workstation ที่ทำงาน"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

#: share/compssUsers.pl:152
#, fuzzy, c-format
msgid "GNOME Workstation"
msgstr "Workstation ที่ทำงาน"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#: share/compssUsers.pl:156
#, fuzzy, c-format
msgid "IceWm Desktop"
msgstr "พื้นที่ทำงาน"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "Graphical Desktops อื่นๆ"

#: share/compssUsers.pl:161
#, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr ""

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381
#, fuzzy, c-format
msgid "SSH Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: share/compssUsers.pl:191
#, fuzzy, c-format
msgid "Webmin"
msgstr "อุปกรณ์"

#: share/compssUsers.pl:192
#, fuzzy, c-format
msgid "Webmin Remote Configuration Server"
msgstr "การคอนฟิก Internet"

#: share/compssUsers.pl:196
#, fuzzy, c-format
msgid "Network Utilities/Monitoring"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:201
#, fuzzy, c-format
msgid "Mandriva Wizards"
msgstr "Control Center"

#: share/compssUsers.pl:202
#, fuzzy, c-format
msgid "Wizards to configure server"
msgstr "การคอนฟิกเครื่องพิมพ์"

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, fuzzy, c-format
msgid "[keyboard]"
msgstr "คีย์บอร์ด"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:146
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:59
#, fuzzy, c-format
msgid "You need to reboot for changes to take effect"
msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:75
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:107 standalone/drakTermServ:113
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:124
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:130
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:212 standalone/drakTermServ:215
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakTermServ:221
#, fuzzy, c-format
msgid "Enable Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/drakTermServ:227
#, fuzzy, c-format
msgid "Disable Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/drakTermServ:233
#, fuzzy, c-format
msgid "Start Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:239
#, fuzzy, c-format
msgid "Stop Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:248
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:252
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:259
#, fuzzy, c-format
msgid "Add/Del Users"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakTermServ:263
#, fuzzy, c-format
msgid "Add/Del Clients"
msgstr "DHCP Client"

#: standalone/drakTermServ:271
#, c-format
msgid "Images"
msgstr "แฟ้มภาพ"

#: standalone/drakTermServ:272
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:290 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr ""

#: standalone/drakTermServ:326 standalone/drakTermServ:327
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:333
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:378
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Wizard"

#: standalone/drakTermServ:393
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:421
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "DHCP Client"

#: standalone/drakTermServ:423
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:425
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:445
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:446 standalone/drakTermServ:766
#: standalone/drakTermServ:782
#, c-format
msgid "This will take a few minutes."
msgstr ""

#: standalone/drakTermServ:455 standalone/drakTermServ:496
#, fuzzy, c-format
msgid "Done!"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakTermServ:467 standalone/drakTermServ:848
#, c-format
msgid "%s failed"
msgstr ""

#: standalone/drakTermServ:476
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""

#: standalone/drakTermServ:482
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:502
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:537
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "การคอนฟิก Internet"

#: standalone/drakTermServ:538
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:544
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:562
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:582
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:594
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:598
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:603
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:612
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:633
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:666
#, c-format
msgid "Boot Floppy"
msgstr ""

#: standalone/drakTermServ:668
#, c-format
msgid "Boot ISO"
msgstr ""

#: standalone/drakTermServ:670
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Image"

#: standalone/drakTermServ:731
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "kernel version"

#: standalone/drakTermServ:734
#, c-format
msgid "Create PXE images."
msgstr ""

#: standalone/drakTermServ:764
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: standalone/drakTermServ:771
#, c-format
msgid "No kernel selected!"
msgstr ""

#: standalone/drakTermServ:774
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:778
#, fuzzy, c-format
msgid "No NIC selected!"
msgstr "ไม่เชื่อมต่อ"

#: standalone/drakTermServ:781
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: standalone/drakTermServ:796
#, fuzzy, c-format
msgid "<-- Delete"
msgstr "ลบ"

#: standalone/drakTermServ:801
#, fuzzy, c-format
msgid "No image selected!"
msgstr "ไม่เชื่อมต่อ"

#: standalone/drakTermServ:804
#, fuzzy, c-format
msgid "Delete All NBIs"
msgstr "เลือกไฟล์"

#: standalone/drakTermServ:966
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:971
#, fuzzy, c-format
msgid "Add User -->"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakTermServ:977
#, c-format
msgid "<-- Del User"
msgstr ""

#: standalone/drakTermServ:1013
#, fuzzy, c-format
msgid "type: %s"
msgstr "ประเภท: "

#: standalone/drakTermServ:1017
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:1047
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Boot Style Configuration"

#: standalone/drakTermServ:1056
#, c-format
msgid "No net boot images created!"
msgstr ""

#: standalone/drakTermServ:1075
#, fuzzy, c-format
msgid "Thin Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:1079
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "DHCP Client"

#: standalone/drakTermServ:1080
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1081
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:1095
#, fuzzy, c-format
msgid "type: fat"
msgstr "ประเภท: "

#: standalone/drakTermServ:1096
#, fuzzy, c-format
msgid "type: thin"
msgstr "ประเภท: "

#: standalone/drakTermServ:1103
#, fuzzy, c-format
msgid "local config: false"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakTermServ:1104
#, fuzzy, c-format
msgid "local config: true"
msgstr "คอนฟิกใหม่"

#: standalone/drakTermServ:1112
#, fuzzy, c-format
msgid "<-- Edit Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:1138
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1145
#, fuzzy, c-format
msgid "Delete Client"
msgstr "DHCP Client"

#: standalone/drakTermServ:1154
#, fuzzy, c-format
msgid "dhcpd Config..."
msgstr "กำลังทำการคอนฟิก"

#: standalone/drakTermServ:1169
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1214
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1230
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1264
#, c-format
msgid "Subnet:"
msgstr ""

#: standalone/drakTermServ:1271
#, c-format
msgid "Netmask:"
msgstr "เน็ตแมสก์:"

#: standalone/drakTermServ:1278
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1285
#, c-format
msgid "Subnet Mask:"
msgstr "Subnet Mask:"

#: standalone/drakTermServ:1292
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1299
#, fuzzy, c-format
msgid "Domain Name:"
msgstr "ชื่อโดเมน"

#: standalone/drakTermServ:1307
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/drakTermServ:1318
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1319
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1361
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1363
#, fuzzy, c-format
msgid "Write Config"
msgstr "คอนฟิกใหม่"

#: standalone/drakTermServ:1379
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakTermServ:1380
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1383
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""

#: standalone/drakTermServ:1536
#, c-format
msgid "Write to %s failed!"
msgstr ""

#: standalone/drakTermServ:1548
#, fuzzy, c-format
msgid "Please insert floppy disk:"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#: standalone/drakTermServ:1552
#, c-format
msgid "Could not access the floppy!"
msgstr ""

#: standalone/drakTermServ:1554
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: standalone/drakTermServ:1557
#, fuzzy, c-format
msgid "No floppy drive available!"
msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"

#: standalone/drakTermServ:1563
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1565
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"

#: standalone/drakTermServ:1575
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1577
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1598
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1757
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1770
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakTermServ:1771
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1773
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1775
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1792
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "ค้นพบ %s"

#: standalone/drakTermServ:1794 standalone/drakTermServ:1867
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakTermServ:1895
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:2035
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38 standalone/drakhosts:118
#: standalone/drakhosts:125 standalone/draknfs:86 standalone/draknfs:107
#: standalone/draknfs:434 standalone/draknfs:436 standalone/draknfs:526
#: standalone/draknfs:533
#, c-format
msgid "Error!"
msgstr "ผิดพลาด!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, fuzzy, c-format
msgid "Auto Install Configurator"
msgstr "การคอนฟิกหลังการติดตั้ง"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, fuzzy, c-format
msgid "replay"
msgstr "เรียกอีกครั้ง"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr ""

#: standalone/drakautoinst:64
#, fuzzy, c-format
msgid "Automatic Steps Configuration"
msgstr "Boot Style Configuration"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, fuzzy, c-format
msgid "Creating auto install floppy"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:287
#, fuzzy, c-format
msgid "Auto Install"
msgstr "ติดตั้ง"

#: standalone/drakautoinst:356
#, fuzzy, c-format
msgid "Add an item"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakautoinst:363
#, fuzzy, c-format
msgid "Remove the last item"
msgstr "ฟอร์แมต loopback file %s"

#: standalone/drakbackup:153
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:154
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:155
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:163
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:164
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:327
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:331
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:378
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:465 standalone/logdrake:437
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:469 standalone/logdrake:442
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:478
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:480
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:482
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:511
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:512
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:518
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:543 standalone/drakbackup:614
#: standalone/drakbackup:670
#, fuzzy, c-format
msgid "Total progress"
msgstr "กำลังตรวจสอบพอร์ต"

#: standalone/drakbackup:596
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:605
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:612
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "Adapter %s: %s"

#: standalone/drakbackup:629
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:630
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "ไม่มีรหัสผ่าน"

#: standalone/drakbackup:631
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:632
#, fuzzy, c-format
msgid "Can not find %s on %s"
msgstr "Adapter %s: %s"

#: standalone/drakbackup:636
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:640
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:690
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:694
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:699
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:741
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:799
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: standalone/drakbackup:826
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:932
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:951 standalone/drakbackup:983
#, c-format
msgid "Backup system files..."
msgstr ""

#: standalone/drakbackup:984 standalone/drakbackup:1024
#, fuzzy, c-format
msgid "Hard Disk Backup files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1023
#, fuzzy, c-format
msgid "Backup User files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1057
#, fuzzy, c-format
msgid "Backup Other files..."
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1058
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1063
#, fuzzy, c-format
msgid "No changes to backup!"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1080 standalone/drakbackup:1103
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1089
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1090
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1092
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1108
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1113
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1122
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1123
#, fuzzy, c-format
msgid " Error while sending mail. \n"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"

#: standalone/drakbackup:1153
#, c-format
msgid "Can not create catalog!"
msgstr ""

#: standalone/drakbackup:1394
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: standalone/drakbackup:1395
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: standalone/drakbackup:1396
#, fuzzy, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1397 standalone/drakbackup:1461
#: standalone/drakbackup:1527
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1399 standalone/drakbackup:1463
#: standalone/drakbackup:1529
#, c-format
msgid "Use Incremental Backups"
msgstr ""

#: standalone/drakbackup:1399 standalone/drakbackup:1463
#: standalone/drakbackup:1529
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1401
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1402
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""

#: standalone/drakbackup:1433
#, fuzzy, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:1460
#, c-format
msgid "Do not include the browser cache"
msgstr ""

#: standalone/drakbackup:1514
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr ""

#: standalone/drakbackup:1515 standalone/drakfont:657
#, fuzzy, c-format
msgid "Remove Selected"
msgstr "ลบคิว"

#: standalone/drakbackup:1578
#, c-format
msgid "Users"
msgstr "ผู้ใช้"

#: standalone/drakbackup:1598
#, fuzzy, c-format
msgid "Use network connection to backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1600
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1604
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1605
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1607
#, c-format
msgid "Transfer Now"
msgstr ""

#: standalone/drakbackup:1609
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1612
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "ชื่อโฮสต์:"

#: standalone/drakbackup:1617
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1629
#, fuzzy, c-format
msgid "Remember this password"
msgstr "ไม่มีรหัสผ่าน"

#: standalone/drakbackup:1645
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1736
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1739
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/drakbackup:1744
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/drakbackup:1751
#, fuzzy, c-format
msgid "Multisession CD"
msgstr "Multimedia - เขียน CD "

#: standalone/drakbackup:1753
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1759
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "โปรดเลือกพาร์ติชั่น"

#: standalone/drakbackup:1760
#, c-format
msgid " Erase Now "
msgstr ""

#: standalone/drakbackup:1766
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1768
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "อุปกรณ์"

#: standalone/drakbackup:1770
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "อุปกรณ์"

#: standalone/drakbackup:1801
#, fuzzy, c-format
msgid "No CD device defined!"
msgstr "เลือกไฟล์"

#: standalone/drakbackup:1843
#, fuzzy, c-format
msgid "Use tape to backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1846
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1852
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1858
#, fuzzy, c-format
msgid "Do not rewind tape after backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1864
#, fuzzy, c-format
msgid "Erase tape before backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1870
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:1946
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:1950
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:1955
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""

#: standalone/drakbackup:1959
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""

#: standalone/drakbackup:2026
#, c-format
msgid "CD-R / DVD-R"
msgstr ""

#: standalone/drakbackup:2031
#, c-format
msgid "HardDrive / NFS"
msgstr ""

#: standalone/drakbackup:2046 standalone/drakbackup:2047
#: standalone/drakbackup:2052
#, c-format
msgid "hourly"
msgstr ""

#: standalone/drakbackup:2046 standalone/drakbackup:2048
#: standalone/drakbackup:2053
#, c-format
msgid "daily"
msgstr ""

#: standalone/drakbackup:2046 standalone/drakbackup:2049
#: standalone/drakbackup:2054
#, c-format
msgid "weekly"
msgstr ""

#: standalone/drakbackup:2046 standalone/drakbackup:2050
#: standalone/drakbackup:2055
#, c-format
msgid "monthly"
msgstr ""

#: standalone/drakbackup:2046 standalone/drakbackup:2051
#: standalone/drakbackup:2056
#, c-format
msgid "custom"
msgstr "กำหนดเอง"

#: standalone/drakbackup:2060
#, c-format
msgid "January"
msgstr "มกราคม"

#: standalone/drakbackup:2060
#, c-format
msgid "February"
msgstr "กุมภาพันธ์"

#: standalone/drakbackup:2060
#, c-format
msgid "March"
msgstr "มีนาคม"

#: standalone/drakbackup:2061
#, c-format
msgid "April"
msgstr "เมษายน"

#: standalone/drakbackup:2061
#, c-format
msgid "May"
msgstr "พฤษภาคม"

#: standalone/drakbackup:2061
#, c-format
msgid "June"
msgstr "มิถุนายน"

#: standalone/drakbackup:2061
#, c-format
msgid "July"
msgstr "กรกฎาคม"

#: standalone/drakbackup:2061
#, c-format
msgid "August"
msgstr "สิงหาคม"

#: standalone/drakbackup:2061
#, c-format
msgid "September"
msgstr "กันยายน"

#: standalone/drakbackup:2062
#, c-format
msgid "October"
msgstr "ตุลาคม"

#: standalone/drakbackup:2062
#, c-format
msgid "November"
msgstr "พฤศจิกายน"

#: standalone/drakbackup:2062
#, c-format
msgid "December"
msgstr "ธันวาคม"

#: standalone/drakbackup:2065
#, c-format
msgid "Sunday"
msgstr "อาทิตย์"

#: standalone/drakbackup:2065
#, c-format
msgid "Monday"
msgstr "จันทร์"

#: standalone/drakbackup:2065
#, c-format
msgid "Tuesday"
msgstr "อังคาร"

#: standalone/drakbackup:2066
#, c-format
msgid "Wednesday"
msgstr "พุธ"

#: standalone/drakbackup:2066
#, c-format
msgid "Thursday"
msgstr "พฤหัสบดี"

#: standalone/drakbackup:2066
#, c-format
msgid "Friday"
msgstr "ศุกร์"

#: standalone/drakbackup:2066
#, c-format
msgid "Saturday"
msgstr "เสาร์"

#: standalone/drakbackup:2098
#, fuzzy, c-format
msgid "Use daemon"
msgstr "ชื่อผู้ใช้"

#: standalone/drakbackup:2102
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2108
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2113
#, c-format
msgid "Minute"
msgstr "นาที"

#: standalone/drakbackup:2117
#, c-format
msgid "Hour"
msgstr "ชั่งโมง"

#: standalone/drakbackup:2121
#, c-format
msgid "Day"
msgstr "วัน"

#: standalone/drakbackup:2125
#, c-format
msgid "Month"
msgstr "เดือน"

#: standalone/drakbackup:2129
#, fuzzy, c-format
msgid "Weekday"
msgstr "พุธ"

#: standalone/drakbackup:2135
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:2141
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2142
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2143
#, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""

#: standalone/drakbackup:2190
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:2194
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2196
#, c-format
msgid "Send mail report after each backup to:"
msgstr ""

#: standalone/drakbackup:2202
#, c-format
msgid "Return address for sent mail:"
msgstr ""

#: standalone/drakbackup:2208
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "ชื่อโฮสต์ของ SMB server"

#: standalone/drakbackup:2213
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2256
#, c-format
msgid "What"
msgstr ""

#: standalone/drakbackup:2261
#, fuzzy, c-format
msgid "Where"
msgstr "Wheel"

#: standalone/drakbackup:2266
#, fuzzy, c-format
msgid "When"
msgstr "Wheel"

#: standalone/drakbackup:2271
#, fuzzy, c-format
msgid "More Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/drakbackup:2284
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: standalone/drakbackup:2304 standalone/drakbackup:4228
#, fuzzy, c-format
msgid "Drakbackup Configuration"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:2320
#, fuzzy, c-format
msgid "Please choose where you want to backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2323
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2323
#, c-format
msgid "Across Network"
msgstr ""

#: standalone/drakbackup:2323
#, c-format
msgid "On CD-R"
msgstr ""

#: standalone/drakbackup:2323
#, c-format
msgid "On Tape Device"
msgstr ""

#: standalone/drakbackup:2369
#, c-format
msgid "Backup Users"
msgstr ""

#: standalone/drakbackup:2370
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakbackup:2383
#, fuzzy, c-format
msgid "Please choose what you want to backup"
msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "

#: standalone/drakbackup:2384
#, fuzzy, c-format
msgid "Backup System"
msgstr "เซ็ตอัพระบบไฟล์"

#: standalone/drakbackup:2386
#, c-format
msgid "Select user manually"
msgstr ""

#: standalone/drakbackup:2415
#, fuzzy, c-format
msgid "Please select data to backup..."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:2487
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2488
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: standalone/drakbackup:2490
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2492
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2494
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2495
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2496
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr ""

#: standalone/drakbackup:2499
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2504
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2505
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2506
#, fuzzy, c-format
msgid " on device: %s"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: standalone/drakbackup:2507
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2508
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: standalone/drakbackup:2509
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2511
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2513
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2514
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2515
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""

#: standalone/drakbackup:2516
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2518
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: standalone/drakbackup:2519
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: standalone/drakbackup:2520
#, fuzzy, c-format
msgid "\tBackups use tar only\n"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2522
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:2523
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2524
#, c-format
msgid "\tSend mail from %s\n"
msgstr ""

#: standalone/drakbackup:2525
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: standalone/drakbackup:2527
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2528
#, c-format
msgid "\t-Hard drive.\n"
msgstr ""

#: standalone/drakbackup:2529
#, c-format
msgid "\t-CD-R.\n"
msgstr ""

#: standalone/drakbackup:2530
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2531
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2532
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2533
#, c-format
msgid "\t-Network by rsync.\n"
msgstr ""

#: standalone/drakbackup:2535
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2540
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2542
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr "ลบคิว"

#: standalone/drakbackup:2544 standalone/drakbackup:2554
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2547
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:2552
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:2731
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2733
#, fuzzy, c-format
msgid "Please uncheck or remove it on next time."
msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"

#: standalone/drakbackup:2743
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2764
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2765
#, c-format
msgid "          Successfully Restored on %s       "
msgstr ""

#: standalone/drakbackup:2885
#, fuzzy, c-format
msgid "         Restore Configuration       "
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:2913
#, c-format
msgid "OK to restore the other files."
msgstr ""

#: standalone/drakbackup:2929
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:2994
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3031
#, fuzzy, c-format
msgid "Restore from Hard Disk."
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3033
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakbackup:3037
#, c-format
msgid "Directory with backups"
msgstr ""

#: standalone/drakbackup:3091
#, fuzzy, c-format
msgid "Select another media to restore from"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3093
#, fuzzy, c-format
msgid "Other Media"
msgstr "อื่นๆ"

#: standalone/drakbackup:3098
#, fuzzy, c-format
msgid "Restore system"
msgstr "ติดตั้งระบบ"

#: standalone/drakbackup:3099
#, fuzzy, c-format
msgid "Restore Users"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3100
#, fuzzy, c-format
msgid "Restore Other"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3102
#, fuzzy, c-format
msgid "Select path to restore (instead of /)"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3106 standalone/drakbackup:3388
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "แบบปรับแก้ได้ (Customized) "

#: standalone/drakbackup:3109
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3111
#, c-format
msgid "Remove user directories before restore."
msgstr ""

#: standalone/drakbackup:3196
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3199
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3217
#, fuzzy, c-format
msgid "No matches found..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakbackup:3221
#, fuzzy, c-format
msgid "Restore Selected"
msgstr "ลบคิว"

#: standalone/drakbackup:3356
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3362
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3371
#, fuzzy, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr "ลบคิว"

#: standalone/drakbackup:3448
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: standalone/drakbackup:3461
#, fuzzy, c-format
msgid "Restore From CD"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3461
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3463
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3473
#, fuzzy, c-format
msgid "Restore From Tape"
msgstr "กู้ตารางพาร์ติชั่น"

#: standalone/drakbackup:3473
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3475
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3486
#, fuzzy, c-format
msgid "Restore Via Network"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3486
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: standalone/drakbackup:3487
#, c-format
msgid "Host Name"
msgstr "ชื่อโฮสต์"

#: standalone/drakbackup:3488
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3495
#, fuzzy, c-format
msgid "Password required"
msgstr "รหัสผ่าน"

#: standalone/drakbackup:3501
#, fuzzy, c-format
msgid "Username required"
msgstr "ชื่อผู้ใช้"

#: standalone/drakbackup:3504
#, fuzzy, c-format
msgid "Hostname required"
msgstr "ชื่อโฮสต์:"

#: standalone/drakbackup:3509
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3522
#, c-format
msgid "Files Restored..."
msgstr ""

#: standalone/drakbackup:3525
#, fuzzy, c-format
msgid "Restore Failed..."
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3543
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakbackup:3764 standalone/drakbackup:3833
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/drakbackup:3768
#, c-format
msgid "Restore all backups"
msgstr ""

#: standalone/drakbackup:3776
#, fuzzy, c-format
msgid "Custom Restore"
msgstr "แบบปรับแก้ได้ (Customized) "

#: standalone/drakbackup:3780 standalone/drakbackup:3829
#, fuzzy, c-format
msgid "Restore From Catalog"
msgstr "กู้ตารางพาร์ติชั่น"

#: standalone/drakbackup:3801
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:3802
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "ถูกต้องหรือไม่?"

#: standalone/drakbackup:3803
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3805
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3821
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3826
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3827
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#: standalone/drakbackup:3863
#, fuzzy, c-format
msgid "Restore Progress"
msgstr "เรียกคืนจากไฟล์"

#: standalone/drakbackup:3974
#, fuzzy, c-format
msgid "Build Backup"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4007 standalone/drakbackup:4327
#, c-format
msgid "Restore"
msgstr "ย้อนกลับ"

#: standalone/drakbackup:4095 standalone/harddrake2:480
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"

#: standalone/drakbackup:4122
#, fuzzy, c-format
msgid "Please select data to restore..."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"

#: standalone/drakbackup:4162
#, fuzzy, c-format
msgid "Backup system files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4165
#, fuzzy, c-format
msgid "Backup user files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4168
#, fuzzy, c-format
msgid "Backup other files"
msgstr "ไฟล์แบ็คอัพมีปัญหา"

#: standalone/drakbackup:4171 standalone/drakbackup:4205
#, c-format
msgid "Total Progress"
msgstr ""

#: standalone/drakbackup:4197
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "บันทึกลงไฟล์"

#: standalone/drakbackup:4200
#, fuzzy, c-format
msgid "Sending files..."
msgstr "บันทึกลงไฟล์"

#: standalone/drakbackup:4270
#, fuzzy, c-format
msgid "Backup Now from configuration file"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:4275
#, fuzzy, c-format
msgid "View Backup Configuration."
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/drakbackup:4301
#, fuzzy, c-format
msgid "Wizard Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakbackup:4306
#, c-format
msgid "Advanced Configuration"
msgstr "ค่าตั้งเพิ่มเติม"

#: standalone/drakbackup:4311
#, fuzzy, c-format
msgid "View Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakbackup:4315
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4320
#, fuzzy, c-format
msgid "Backup Now"
msgstr "เซ็ตอัพระบบไฟล์"

#: standalone/drakbackup:4324
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4344 standalone/drakbackup:4347
#, c-format
msgid "Drakbackup"
msgstr ""

#: standalone/drakboot:76 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:139 standalone/printerdrake:140
#: standalone/printerdrake:141
#, c-format
msgid "/_File"
msgstr "/_ไฟล์"

#: standalone/drakboot:77 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr "/ไฟล์/_เลิก"

#: standalone/drakboot:77 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:141
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:117
#, c-format
msgid "Text only"
msgstr ""

#: standalone/drakboot:118
#, c-format
msgid "Verbose"
msgstr ""

#: standalone/drakboot:119
#, c-format
msgid "Silent"
msgstr ""

#: standalone/drakboot:126
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:127
#, fuzzy, c-format
msgid "Do you want to configure it now?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: standalone/drakboot:136
#, fuzzy, c-format
msgid "Install themes"
msgstr "ติดตั้งระบบ"

#: standalone/drakboot:138
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: standalone/drakboot:143
#, c-format
msgid "Theme"
msgstr "ชุดตกแต่ง"

#: standalone/drakboot:146
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: standalone/drakboot:151
#, fuzzy, c-format
msgid "Create new theme"
msgstr "สร้างพาร์ติชั่นใหม่"

#: standalone/drakboot:183
#, fuzzy, c-format
msgid "Default user"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakboot:184
#, fuzzy, c-format
msgid "Default desktop"
msgstr "Default"

#: standalone/drakboot:187
#, c-format
msgid "No, I do not want autologin"
msgstr "ไม่ต้องการ autologin"

#: standalone/drakboot:188
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"

#: standalone/drakboot:195
#, c-format
msgid "System mode"
msgstr "System mode"

#: standalone/drakboot:198
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "รัน X-Window เมื่อเริ่มทำงาน"

#: standalone/drakboot:264
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr ""

#: standalone/drakbug:46
#, c-format
msgid "Mandriva Linux Control Center"
msgstr "Mandriva Linux ฐานควบคุม"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr ""

#: standalone/drakbug:49 standalone/drakbug:152
#, c-format
msgid "Standalone Tools"
msgstr ""

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr "Mandriva Online"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "เครื่องมือแก้ไขเมนู"

#: standalone/drakbug:53
#, fuzzy, c-format
msgid "Msec"
msgstr "Mouse"

#: standalone/drakbug:54
#, fuzzy, c-format
msgid "Remote Control"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "Software Manager"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr ""

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr ""

#: standalone/drakbug:58
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, fuzzy, c-format
msgid "Configuration Wizards"
msgstr "Network Configuration Wizard"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "ค้นหาแพ็กเกจ"

#: standalone/drakbug:87
#, fuzzy, c-format
msgid "Package: "
msgstr "เลือกกลุ่มแพ็คเก็จ"

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "เคอร์เนล:"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""

#: standalone/drakbug:107
#, fuzzy, c-format
msgid "Report"
msgstr "Port"

#: standalone/drakbug:162
#, fuzzy, c-format
msgid "Not installed"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakbug:174
#, fuzzy, c-format
msgid "Package not installed"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "คอนฟิกใหม่"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "โซนเวลา"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "ช่วงเวลา-DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT-DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Network interface"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "เซิร์ฟเวอร์:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "ตั้งค่าใหม่"

#: standalone/drakclock:224
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/drakconnect:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"

#: standalone/drakconnect:89 standalone/drakconnect:803
#: standalone/drakroam:163
#, c-format
msgid "Gateway:"
msgstr "เกตเวย์:"

#: standalone/drakconnect:89 standalone/drakconnect:803
#, c-format
msgid "Interface:"
msgstr "Interface:"

#: standalone/drakconnect:93 standalone/net_monitor:117
#, c-format
msgid "Wait please"
msgstr ""

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "Interface"

#: standalone/drakconnect:109 standalone/printerdrake:212
#: standalone/printerdrake:219
#, c-format
msgid "State"
msgstr "สถานะ"

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr "ชื่อโฮสต์:"

#: standalone/drakconnect:128
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "คอนฟิกเม้าส์"

#: standalone/drakconnect:142 standalone/drakconnect:841
#, c-format
msgid "LAN configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:147
#, c-format
msgid "Configure Local Area Network..."
msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "มีผลทันที"

#: standalone/drakconnect:188
#, fuzzy, c-format
msgid "Manage connections"
msgstr "cable connection"

#: standalone/drakconnect:215
#, fuzzy, c-format
msgid "Device selected"
msgstr "ลบคิว"

#: standalone/drakconnect:296
#, fuzzy, c-format
msgid "IP configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:335
#, fuzzy, c-format
msgid "DNS servers"
msgstr "เซิร์ฟเวอร์ DNS"

#: standalone/drakconnect:343
#, fuzzy, c-format
msgid "Search Domain"
msgstr "โดเมน NIS"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "static"
msgstr "กำหนดค่า IP แบบอัตโนมัติ"

#: standalone/drakconnect:351 standalone/drakroam:144
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:515
#, c-format
msgid "Flow control"
msgstr "Flow control"

#: standalone/drakconnect:516
#, fuzzy, c-format
msgid "Line termination"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: standalone/drakconnect:527
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Kernel Boot Timeout"

#: standalone/drakconnect:531
#, fuzzy, c-format
msgid "Use lock file"
msgstr "เลือกไฟล์"

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:536
#, fuzzy, c-format
msgid "Busy wait"
msgstr "ออก"

#: standalone/drakconnect:541
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Mouse"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "เปิดใช้งาน"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "ปิดการใช้งาน"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr ""

#: standalone/drakconnect:594
#, c-format
msgid "Module name"
msgstr "ชี่อ module"

#: standalone/drakconnect:595
#, fuzzy, c-format
msgid "Mac Address"
msgstr "ค่า IP"

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr ""

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr ""

#: standalone/drakconnect:696 standalone/drakgw:322
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"

#: standalone/drakconnect:704
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "เลือก network interface"

#: standalone/drakconnect:708
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "เลือก network interface"

#: standalone/drakconnect:740
#, fuzzy, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"

#: standalone/drakconnect:741
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:757
#, c-format
msgid "No IP"
msgstr ""

#: standalone/drakconnect:758
#, fuzzy, c-format
msgid "No Mask"
msgstr "แพ็คเก็จชำรุด"

#: standalone/drakconnect:759 standalone/drakconnect:912
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:759 standalone/drakconnect:912
#, fuzzy, c-format
msgid "down"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakconnect:794 standalone/net_monitor:466
#, c-format
msgid "Connected"
msgstr "เชื่อมต่ออยู่"

#: standalone/drakconnect:794 standalone/net_monitor:466
#, c-format
msgid "Not connected"
msgstr "ไม่เชื่อมต่อ"

#: standalone/drakconnect:796
#, c-format
msgid "Disconnect..."
msgstr "ยกเลิกติดต่อ..."

#: standalone/drakconnect:796
#, c-format
msgid "Connect..."
msgstr "ติดต่อ"

#: standalone/drakconnect:837
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "แอ็คทีฟ"

#: standalone/drakconnect:837
#, fuzzy, c-format
msgid "Activate now"
msgstr "แอ็คทีฟ"

#: standalone/drakconnect:845
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: standalone/drakconnect:859
#, c-format
msgid "LAN Configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakconnect:871
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: standalone/drakconnect:880
#, c-format
msgid "Boot Protocol"
msgstr "Boot Protocol"

#: standalone/drakconnect:881
#, c-format
msgid "Started on boot"
msgstr "เริ่มทำงานตอน boot"

#: standalone/drakconnect:917
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakconnect:971 standalone/net_applet:51
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:972 standalone/drakroam:42 standalone/net_applet:52
#, fuzzy, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "เลือก network interface"

#: standalone/drakconnect:977
#, c-format
msgid "Internet connection configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/drakconnect:995
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"

#: standalone/drakconnect:1017
#, c-format
msgid "Internet Connection Configuration"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/drakconnect:1018
#, c-format
msgid "Internet access"
msgstr "การติดต่อ internet"

#: standalone/drakconnect:1020 standalone/net_monitor:96
#, c-format
msgid "Connection type: "
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/drakconnect:1023
#, c-format
msgid "Status:"
msgstr "สถานะ:"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr ""

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr ""

#: standalone/drakedm:42
#, c-format
msgid "XDM (X Display Manager)"
msgstr ""

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:72
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr ""

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr ""

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr ""

#: standalone/drakfont:210
#, fuzzy, c-format
msgid "No fonts found"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
#: standalone/drakfont:412 standalone/drakfont:426
#, fuzzy, c-format
msgid "done"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:258
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:261
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "ลบคิว"

#: standalone/drakfont:271
#, c-format
msgid "Search for fonts in installed list"
msgstr ""

#: standalone/drakfont:296
#, c-format
msgid "%s fonts conversion"
msgstr ""

#: standalone/drakfont:325
#, fuzzy, c-format
msgid "Fonts copy"
msgstr "ฟอร์แมต Floppy"

#: standalone/drakfont:328
#, fuzzy, c-format
msgid "True Type fonts installation"
msgstr "กำลังเตรียมการติดตั้ง"

#: standalone/drakfont:335
#, c-format
msgid "please wait during ttmkfdir..."
msgstr ""

#: standalone/drakfont:336
#, c-format
msgid "True Type install done"
msgstr ""

#: standalone/drakfont:342 standalone/drakfont:357
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:351
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:361
#, c-format
msgid "Suppress Temporary Files"
msgstr ""

#: standalone/drakfont:364
#, fuzzy, c-format
msgid "Restart XFS"
msgstr "จำเพาะ"

#: standalone/drakfont:410 standalone/drakfont:420
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:422
#, fuzzy, c-format
msgid "xfs restart"
msgstr "จำเพาะ"

#: standalone/drakfont:430
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:474 standalone/drakfont:483
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:484
#, fuzzy, c-format
msgid "Font List"
msgstr "กำหนดจุดเม้าท์"

#: standalone/drakfont:490
#, c-format
msgid "About"
msgstr "เกี่ยวกับ"

#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
#, c-format
msgid "Uninstall"
msgstr "ยกเลิกการติดตั้งโปรแกรม"

#: standalone/drakfont:493
#, c-format
msgid "Import"
msgstr "นำเข้า"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:511
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""

#: standalone/drakfont:520
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:536
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:555
#, fuzzy, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"

#: standalone/drakfont:556
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:566
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:567
#, fuzzy, c-format
msgid "StarOffice"
msgstr "ดี"

#: standalone/drakfont:568
#, fuzzy, c-format
msgid "Abiword"
msgstr "เลิก"

#: standalone/drakfont:569
#, fuzzy, c-format
msgid "Generic Printers"
msgstr "เครื่องพิมพ์"

#: standalone/drakfont:585
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: standalone/drakfont:586
#, c-format
msgid "File Selection"
msgstr "เลือกเอกสาร"

#: standalone/drakfont:590
#, c-format
msgid "Fonts"
msgstr "แบบอักษร"

#: standalone/drakfont:653
#, fuzzy, c-format
msgid "Import fonts"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/drakfont:658
#, fuzzy, c-format
msgid "Install fonts"
msgstr "ติดตั้งระบบ"

#: standalone/drakfont:693
#, c-format
msgid "click here if you are sure."
msgstr ""

#: standalone/drakfont:695
#, c-format
msgid "here if no."
msgstr ""

#: standalone/drakfont:734
#, c-format
msgid "Unselected All"
msgstr ""

#: standalone/drakfont:737
#, fuzzy, c-format
msgid "Selected All"
msgstr "เลือกไฟล์"

#: standalone/drakfont:740
#, c-format
msgid "Remove List"
msgstr "ลบรายการ"

#: standalone/drakfont:751 standalone/drakfont:770
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/drakfont:755 standalone/drakfont:775
#, fuzzy, c-format
msgid "Initial tests"
msgstr "ข้อความ init"

#: standalone/drakfont:756
#, fuzzy, c-format
msgid "Copy fonts on your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/drakfont:757
#, c-format
msgid "Install & convert Fonts"
msgstr ""

#: standalone/drakfont:758
#, fuzzy, c-format
msgid "Post Install"
msgstr "ติดตั้ง"

#: standalone/drakfont:776
#, fuzzy, c-format
msgid "Remove fonts on your system"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/drakfont:777
#, fuzzy, c-format
msgid "Post Uninstall"
msgstr "ออกจากการติดตั้ง"

#: standalone/drakgw:50 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr ""

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr "การเชื่อมต่อกับ Internet แบบ sharing"

#: standalone/drakgw:79
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
"\n"
"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:99
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:105
#, fuzzy, c-format
msgid "Reconfigure"
msgstr "คอนฟิกใหม่"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
"\n"
"%s\n"
"\n"
"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"

#: standalone/drakgw:177
#, fuzzy, c-format
msgid "Local Area Network setings"
msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr ""

#: standalone/drakgw:182
#, fuzzy, c-format
msgid "The internal domain name"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"

#: standalone/drakgw:204
#, fuzzy, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr ""

#: standalone/drakgw:209
#, fuzzy, c-format
msgid "The DNS Server IP"
msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#: standalone/drakgw:241
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:248
#, fuzzy, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "Boot Style Configuration"

#: standalone/drakgw:249
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:250
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:251
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:252
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:278
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr ""

#: standalone/drakgw:282
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr ""

#: standalone/drakgw:283
#, c-format
msgid "Admin mail"
msgstr ""

#: standalone/drakgw:284
#, fuzzy, c-format
msgid "Visible hostname"
msgstr "ชื่อโฮสต์รีโมท"

#: standalone/drakgw:285
#, fuzzy, c-format
msgid "Proxy port"
msgstr "คุณสมบัติ"

#: standalone/drakgw:286
#, fuzzy, c-format
msgid "Cache size (MB)"
msgstr "ขนาดของ chunk"

#: standalone/drakgw:311
#, fuzzy, c-format
msgid "Broadcast printer information"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: standalone/drakgw:328
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakgw:334
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: standalone/drakgw:340
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"

#: standalone/drakgw:375
#, c-format
msgid "Disabling servers..."
msgstr "ยกเลิกการทำงานของ server"

#: standalone/drakgw:389
#, c-format
msgid "Firewalling configuration detected!"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: standalone/drakgw:390
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""

#: standalone/drakgw:398
#, c-format
msgid "Configuring..."
msgstr "กำลังทำการคอนฟิก"

#: standalone/drakgw:399
#, c-format
msgid "Configuring firewall..."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:36
#, fuzzy, c-format
msgid "Mandriva Linux Help Center"
msgstr "Mandriva Linux ฐานควบคุม"

#: standalone/drakhelp:36
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakhosts:108
#, c-format
msgid "Please %s information"
msgstr ""

#: standalone/drakhosts:110
#, c-format
msgid "IP address:"
msgstr ""

#: standalone/drakhosts:111
#, c-format
msgid "Host name:"
msgstr ""

#: standalone/drakhosts:112
#, c-format
msgid "Host Aliases:"
msgstr ""

#: standalone/drakhosts:118
#, c-format
msgid "Please enter a valid IP address."
msgstr ""

#: standalone/drakhosts:125
#, c-format
msgid "Same IP is already in %s file."
msgstr ""

#: standalone/drakhosts:194
#, c-format
msgid "Host Aliases"
msgstr ""

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr ""

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr ""

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr ""

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr ""

#: standalone/drakids:20
#, fuzzy, c-format
msgid "Date"
msgstr "สถานะ"

#: standalone/drakids:21 standalone/drakids:37
#, fuzzy, c-format
msgid "Attacker"
msgstr "รายละเอียด"

#: standalone/drakids:22
#, fuzzy, c-format
msgid "Attack type"
msgstr "ประเภท: "

#: standalone/drakids:23
#, fuzzy, c-format
msgid "Service"
msgstr "บริการ"

#: standalone/drakids:24
#, c-format
msgid "Network interface"
msgstr "Network interface"

#: standalone/drakids:60 standalone/net_applet:330
#, fuzzy, c-format
msgid "Active Firewall"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: standalone/drakids:63
#, c-format
msgid "Blacklist"
msgstr ""

#: standalone/drakids:67
#, fuzzy, c-format
msgid "Remove from blacklist"
msgstr "ลบออกจาก LVM"

#: standalone/drakids:68
#, c-format
msgid "Move to whitelist"
msgstr ""

#: standalone/drakids:72
#, c-format
msgid "Whitelist"
msgstr ""

#: standalone/drakids:76
#, fuzzy, c-format
msgid "Remove from whitelist"
msgstr "ลบออกจาก LVM"

#: standalone/drakids:125
#, fuzzy, c-format
msgid "Port scanning"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/drakids:126
#, fuzzy, c-format
msgid "Service attack"
msgstr "ชนิด_บริการ:"

#: standalone/drakids:127
#, fuzzy, c-format
msgid "Password cracking"
msgstr "รหัสผ่าน (ใส่อีกครั้ง)"

#: standalone/draknfs:43
#, c-format
msgid "map root user as anonymous"
msgstr ""

#: standalone/draknfs:44
#, c-format
msgid "map all users to anonymous user"
msgstr ""

#: standalone/draknfs:45
#, c-format
msgid "No user UID mapping"
msgstr ""

#: standalone/draknfs:46
#, c-format
msgid "allow real remote root access"
msgstr ""

#: standalone/draknfs:85
#, c-format
msgid "NFS server"
msgstr ""

#: standalone/draknfs:85
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr ""

#: standalone/draknfs:86
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr ""

#: standalone/draknfs:102
#, c-format
msgid "Directory Selection"
msgstr ""

#: standalone/draknfs:107
#, c-format
msgid "Should be a directory."
msgstr ""

#: standalone/draknfs:138
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""

#: standalone/draknfs:153
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">root_squash:</span> map requests from uid/"
"gid 0 to the anonymous uid/gid.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">no_root_squash:</span> turn off root "
"squashing. This option is mainly useful for diskless clients.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">all_squash:</span> map all uids and gids to "
"the anonymous  user. Useful  for  NFS-exported public FTP directories, news "
"spool directories, etc. The opposite option is no_all_squash, which is the "
"default  setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly  set "
"the uid and gid of the anonymous account.\n"
msgstr ""

#: standalone/draknfs:169
#, c-format
msgid "Synchronous access:"
msgstr ""

#: standalone/draknfs:170
#, c-format
msgid "Secured Connection:"
msgstr ""

#: standalone/draknfs:171
#, c-format
msgid "Read-Only share:"
msgstr ""

#: standalone/draknfs:173
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr ""

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""

#: standalone/draknfs:175
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""

#: standalone/draknfs:176
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""

#: standalone/draknfs:372
#, fuzzy, c-format
msgid "Advanced Options Help"
msgstr "ค่าตั้งเพิ่มเติม"

#: standalone/draknfs:383
#, c-format
msgid "NFS directory"
msgstr ""

#: standalone/draknfs:385
#, c-format
msgid "Directory:"
msgstr ""

#: standalone/draknfs:388
#, c-format
msgid "Host access"
msgstr ""

#: standalone/draknfs:390
#, c-format
msgid "Access:"
msgstr ""

#: standalone/draknfs:390
#, c-format
msgid "Hosts Access"
msgstr ""

#: standalone/draknfs:393
#, c-format
msgid "User ID Mapping"
msgstr ""

#: standalone/draknfs:395
#, c-format
msgid "User ID:"
msgstr ""

#: standalone/draknfs:395
#, c-format
msgid "Help User ID"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Anonymous user ID:"
msgstr ""

#: standalone/draknfs:397
#, c-format
msgid "Anonymous Group ID:"
msgstr ""

#: standalone/draknfs:434 standalone/draknfs:526
#, c-format
msgid "Please enter a directory to share."
msgstr ""

#: standalone/draknfs:436
#, c-format
msgid "You must specify hosts access."
msgstr ""

#: standalone/draknfs:514
#, c-format
msgid "Share Directory"
msgstr ""

#: standalone/draknfs:514
#, c-format
msgid "Hosts Wildcard"
msgstr ""

#: standalone/draknfs:514
#, c-format
msgid "General Options"
msgstr ""

#: standalone/draknfs:514
#, c-format
msgid "Custom Options"
msgstr ""

#: standalone/draknfs:533
#, c-format
msgid "Please use the modify button to set right access."
msgstr ""

#: standalone/draknfs:588
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr ""

#: standalone/draknfs:597
#, c-format
msgid "Failed to add NFS share."
msgstr ""

#: standalone/draknfs:604
#, c-format
msgid "Failed to Modify NFS share."
msgstr ""

#: standalone/draknfs:611
#, c-format
msgid "Failed to remove an NFS share."
msgstr ""

#: standalone/drakperm:21
#, fuzzy, c-format
msgid "System settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:22
#, fuzzy, c-format
msgid "Custom settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "กำลังพาร์ติชั่น Custom disk"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "แก้ไขได้"

#: standalone/drakperm:48 standalone/drakperm:323
#, c-format
msgid "Path"
msgstr "พาธ"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "ผู้ใช้"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "กลุ่ม"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "สิทธิ์"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr ""

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr ""

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "ขึ้น"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "เลื่อนลง"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Add a rule"
msgstr "เพิ่ม 1 module"

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Add a new rule at the end"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Delete selected rule"
msgstr "ลบคิว"

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362
#: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680
#: standalone/printerdrake:233
#, c-format
msgid "Edit"
msgstr "ปรับแต่ง"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr ""

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "ผู้ใช้"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "กลุ่ม"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "อื่นๆ"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "อ่าน"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "เขียน"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "ดำเนินการ"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr ""

#: standalone/drakperm:273
#, fuzzy, c-format
msgid "Use owner id for execution"
msgstr "ใช้ auto detection"

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr ""

#: standalone/drakperm:274
#, fuzzy, c-format
msgid "Use group id for execution"
msgstr "ใช้ auto detection"

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "ผู้ใช้:"

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "กลุ่ม:"

#: standalone/drakperm:298
#, fuzzy, c-format
msgid "Current user"
msgstr "ยอมรับผู้ใช้"

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""

#: standalone/drakperm:309
#, c-format
msgid "Path selection"
msgstr "เลือกตำแหน่ง"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr "คุณสมบัติ"

#: standalone/drakroam:41
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakroam:141
#, c-format
msgid "ESSID"
msgstr ""

#: standalone/drakroam:142 standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr "โหมด"

#: standalone/drakroam:143 standalone/harddrake2:97
#, fuzzy, c-format
msgid "Channel"
msgstr "ยกเลิก"

#: standalone/drakroam:145
#, c-format
msgid "Key"
msgstr ""

#: standalone/drakroam:161
#, c-format
msgid "Network:"
msgstr ""

#: standalone/drakroam:162
#, c-format
msgid "IP:"
msgstr ""

#: standalone/drakroam:164
#, c-format
msgid "Mode:"
msgstr ""

#: standalone/drakroam:165
#, c-format
msgid "Encryption:"
msgstr "การเข้ารหัส:"

#: standalone/drakroam:166
#, c-format
msgid "Signal:"
msgstr ""

#: standalone/drakroam:180
#, c-format
msgid "Roaming"
msgstr ""

#: standalone/drakroam:183 standalone/drakroam:266
#, c-format
msgid "Roaming: %s"
msgstr ""

#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1047
#: standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr ""

#: standalone/drakroam:190
#, c-format
msgid "Scan interval (sec): "
msgstr ""

#: standalone/drakroam:193
#, c-format
msgid "Set"
msgstr ""

#: standalone/drakroam:198
#, c-format
msgid "Known Networks (Drag up/down or edit)"
msgstr ""

#: standalone/drakroam:206
#, c-format
msgid "Connect"
msgstr "เชื่อมต่อ"

#: standalone/drakroam:214
#, c-format
msgid "Available Networks"
msgstr ""

#: standalone/drakroam:229
#, c-format
msgid "Rescan"
msgstr ""

#: standalone/drakroam:233
#, c-format
msgid "Status"
msgstr "สถานะ"

#: standalone/drakroam:240
#, c-format
msgid "Disconnect"
msgstr "เลิกการเชื่อมต่อ"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:241 standalone/printerdrake:239
#, c-format
msgid "Refresh"
msgstr "อ่านค่าใหม่"

#: standalone/drakroam:265 standalone/drakvpn:1047 standalone/drakvpn:1063
#: standalone/drakvpn:1076
#, fuzzy, c-format
msgid "on"
msgstr "ทำเรียบร้อยแล้ว"

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:53
#, c-format
msgid "Ignore"
msgstr "ไม่สนใจ"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:101
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:154 standalone/harddrake2:208
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: standalone/draksec:168
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr " (Default)"

#: standalone/draksec:210
#, fuzzy, c-format
msgid "Security Level:"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/draksec:217
#, fuzzy, c-format
msgid "Security Administrator:"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"

#: standalone/draksec:219
#, c-format
msgid "Basic options"
msgstr ""

#: standalone/draksec:233
#, fuzzy, c-format
msgid "Network Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/draksec:233
#, fuzzy, c-format
msgid "System Options"
msgstr "อ๊อปชั่นของโมดูล:"

#: standalone/draksec:268
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:298
#, fuzzy, c-format
msgid "Please wait, setting security level..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/draksec:304
#, fuzzy, c-format
msgid "Please wait, setting security options..."
msgstr "กำลังเตรียมการติดตั้ง"

#: standalone/draksound:47
#, fuzzy, c-format
msgid "No Sound Card detected!"
msgstr "ไม่เชื่อมต่อ"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""

#: standalone/draksplash:15
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: standalone/draksplash:34
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:35
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:36
#, c-format
msgid "text width"
msgstr ""

#: standalone/draksplash:37
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:38
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:39
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:40
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:41
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:58 standalone/draksplash:63
#, c-format
msgid "Choose progress bar color"
msgstr ""

#: standalone/draksplash:59 standalone/draksplash:64
#, c-format
msgid "Choose picture"
msgstr ""

#: standalone/draksplash:60
#, c-format
msgid "Silent bootsplash"
msgstr ""

#: standalone/draksplash:65
#, c-format
msgid "Verbose bootsplash"
msgstr ""

#: standalone/draksplash:67
#, c-format
msgid "Display logo on Console"
msgstr ""

#: standalone/draksplash:70
#, c-format
msgid "Console bootsplash"
msgstr ""

#: standalone/draksplash:76
#, fuzzy, c-format
msgid "Theme name"
msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#: standalone/draksplash:79
#, fuzzy, c-format
msgid "final resolution"
msgstr "ขนาดจอภาพ"

#: standalone/draksplash:84
#, fuzzy, c-format
msgid "Save theme"
msgstr "ติดตั้งระบบ"

#: standalone/draksplash:145
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:159
#, c-format
msgid "Unable to load image file %s"
msgstr ""

#: standalone/draksplash:169
#, fuzzy, c-format
msgid "choose image"
msgstr "เลือกกิจกรรม"

#: standalone/draksplash:186
#, fuzzy, c-format
msgid "ProgressBar color selection"
msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "เพิ่มผู้ใช้"

#: standalone/drakups:83
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:93
#, fuzzy, c-format
msgid "Autodetection"
msgstr "ใช้ auto detection"

#: standalone/drakups:101 standalone/harddrake2:246
#, fuzzy, c-format
msgid "Detection in progress"
msgstr "ค้นหาเจอบน port %s"

#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449
#: standalone/logdrake:455
#, fuzzy, c-format
msgid "Congratulations"
msgstr "ขอแสดงความยินดี"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/drakups:128 standalone/drakups:140
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "การคอนฟิก Internet"

#: standalone/drakups:128
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr ""

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "ชื่อ:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr ""

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "พอร์ต:"

#: standalone/drakups:149
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: standalone/drakups:159
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS devices"
msgstr "อุปกรณ์"

#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "ชื่อ"

#: standalone/drakups:269
#, fuzzy, c-format
msgid "UPS users"
msgstr "ชื่อผู้ใช้"

#: standalone/drakups:285
#, c-format
msgid "Access Control Lists"
msgstr ""

#: standalone/drakups:286
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:298
#, fuzzy, c-format
msgid "Rules"
msgstr "ไม่ยอมรับ"

#: standalone/drakups:299
#, c-format
msgid "Action"
msgstr "การกระทำ"

#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "ระดับ"

#: standalone/drakups:299
#, fuzzy, c-format
msgid "ACL name"
msgstr "ชื่อ LVM"

#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Dvorak (US)"

#: standalone/drakups:339
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "ทดสอบการคอนฟิก"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Dvorak (US)"

#: standalone/drakvpn:95
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "disable"

#: standalone/drakvpn:101 standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "คอนฟิกใหม่"

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr "เลิก"

#: standalone/drakvpn:105
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "ยกเลิกการทำงานของ server"

#: standalone/drakvpn:114
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "enable"

#: standalone/drakvpn:135
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr "เริ่มทำงาน server"

#: standalone/drakvpn:141
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "ลบทิ้ง 1 module"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"

#: standalone/drakvpn:278
#, fuzzy, c-format
msgid "Security Policies"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:281 standalone/drakvpn:292
#, fuzzy, c-format
msgid "Configuration file"
msgstr "การปรับแต่ง LAN"

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:311 standalone/drakvpn:671
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s เซ็กเตอร์"

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "เรียกอีกครั้ง"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, fuzzy, c-format
msgid "Commit"
msgstr "แบบอัด (compact)"

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "config setup"
msgstr "คอนฟิกใหม่"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "conn %default"
msgstr "default"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "normal conn"
msgstr "โหมดธรรมดา"

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, fuzzy, c-format
msgid "Exists!"
msgstr "Ext2"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:391
#, fuzzy, c-format
msgid "interfaces"
msgstr "Interface"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:394
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:437
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:439
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "ซ้าย"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:477
#, fuzzy, c-format
msgid "section name"
msgstr "ชื่อการเชื่อมต่อ"

#: standalone/drakvpn:478
#, c-format
msgid "authby"
msgstr ""

#: standalone/drakvpn:479
#, fuzzy, c-format
msgid "auto"
msgstr "เลิก"

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr "ขวา"

#: standalone/drakvpn:486
#, fuzzy, c-format
msgid "rightcert"
msgstr "สูง"

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:562 standalone/drakvpn:812
#, fuzzy, c-format
msgid "Edit section"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, fuzzy, c-format
msgid "Section names"
msgstr "ชื่อการเชื่อมต่อ"

#: standalone/drakvpn:576
#, fuzzy, c-format
msgid "Can not edit!"
msgstr "Adapter %s: %s"

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:642 standalone/drakvpn:859
#, fuzzy, c-format
msgid "Remove section"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:721
#, c-format
msgid "path"
msgstr ""

#: standalone/drakvpn:721
#, c-format
msgid "remote"
msgstr "รีโมท"

#: standalone/drakvpn:721
#, fuzzy, c-format
msgid "sainfo"
msgstr "ข้อมูล"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:732
#, fuzzy, c-format
msgid "path type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:756 standalone/drakvpn:849
#, fuzzy, c-format
msgid "real file"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:927
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Boot Protocol"

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:960
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:982
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "หมายเลขโทรศัพท์"

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1019
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/drakvpn:1021
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1022
#, fuzzy, c-format
msgid "deflate"
msgstr "default"

#: standalone/drakvpn:1029
#, c-format
msgid "Remote"
msgstr "Remote"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1038
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1046
#, fuzzy, c-format
msgid "Generate policy"
msgstr "ระบบความป้องกัน"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1062
#, fuzzy, c-format
msgid "Passive"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1067
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1069
#, fuzzy, c-format
msgid "My certfile"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:1070
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1072
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/drakvpn:1073
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "เลือกไฟล์"

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1075
#, fuzzy, c-format
msgid "Verify cert"
msgstr "ดีมาก"

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1100
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "เครื่องพิมพ์"

#: standalone/drakvpn:1101
#, fuzzy, c-format
msgid "Proposal"
msgstr "Protocol"

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1112
#, fuzzy, c-format
msgid "DH group"
msgstr "เวิร์กกรุ๊ป (workgroup)"

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "คำสั่ง"

#: standalone/drakvpn:1120
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1122
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Boot Protocol"

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, fuzzy, c-format
msgid "any"
msgstr "พฤษภาคม"

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "ธง"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr "ทิศทาง"

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "ipsec"
msgstr "Mouse"

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "discard"
msgstr "disable"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "tunnel"
msgstr "ยกเลิก"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "transport"
msgstr "กำลังตรวจสอบพอร์ต"

#: standalone/drakvpn:1131
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Workstation ที่ทำงาน"

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr "default"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "use"
msgstr "Mouse"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "unique"
msgstr "มิถุนายน"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr ""

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "Canada (cable)"
msgstr "คานาดา (ควิเบค)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr ""

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr ""

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr ""

#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "West Europe"
msgstr "ยุโรป"

#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "East Europe"
msgstr "ยุโรป"

#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "France [SECAM]"
msgstr "ฝรั่งเศษ"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr ""

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr ""

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr ""

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr ""

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr ""

#: standalone/drakxtv:107
#, fuzzy, c-format
msgid "There was an error while scanning for TV channels"
msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr ""

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/harddrake2:25
#, fuzzy, c-format
msgid "Alternative drivers"
msgstr "กำลังพิมพ์กระดาษทดสอบ"

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: standalone/harddrake2:31 standalone/harddrake2:146
#, fuzzy, c-format
msgid "Bus identification"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:39
#, c-format
msgid "this field describes the device"
msgstr ""

#: standalone/harddrake2:40
#, fuzzy, c-format
msgid "Old device file"
msgstr "เลือกไฟล์"

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:42
#, fuzzy, c-format
msgid "New devfs device"
msgstr "อุปกรณ์เกตเวย์"

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "โมดูล"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "Extended partitions"
msgstr "สร้างพาร์ติชั่นใหม่"

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "the number of extended partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"

#: standalone/harddrake2:48
#, c-format
msgid "Geometry"
msgstr "ค่าเรขาคณิต"

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "Disk controller"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr ""

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:212
#, c-format
msgid "Model"
msgstr "แบบ"

#: standalone/harddrake2:51
#, fuzzy, c-format
msgid "hard disk model"
msgstr "Card mem (DMA)"

#: standalone/harddrake2:52
#, fuzzy, c-format
msgid "network printer port"
msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "Primary partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "the number of the primary partitions"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#: standalone/harddrake2:54
#, c-format
msgid "the vendor name of the device"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr ""

#: standalone/harddrake2:55
#, fuzzy, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device #"
msgstr "อุปกรณ์"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device number"
msgstr "หมายเลขโทรศัพท์"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "PCI function number"
msgstr "ชื่อการเชื่อมต่อ"

#: standalone/harddrake2:58
#, fuzzy, c-format
msgid "Vendor ID"
msgstr "ยกเลิก"

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "Device ID"
msgstr "อุปกรณ์: "

#: standalone/harddrake2:59
#, c-format
msgid "this is the numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "อุปกรณ์"

#: standalone/harddrake2:61
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:62
#, fuzzy, c-format
msgid "Device USB ID"
msgstr "อุปกรณ์: "

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:67
#, fuzzy, c-format
msgid "Cache size"
msgstr "ขนาดของ chunk"

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr ""

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: standalone/harddrake2:72
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "เลือกระดับระบบรักษาความปลอดภัย"

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr "แฟล็ก"

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr ""

#: standalone/harddrake2:84
#, fuzzy, c-format
msgid "Model name"
msgstr "ชี่อ module"

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr ""

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "Processor ID"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr ""

#: standalone/harddrake2:87
#, fuzzy, c-format
msgid "Model stepping"
msgstr "ฟอร์แมต"

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr ""

#: standalone/harddrake2:89
#, fuzzy, c-format
msgid "Write protection"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:93
#, fuzzy, c-format
msgid "Floppy format"
msgstr "ฟอร์แมต"

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:97
#, c-format
msgid "EIDE/SCSI channel"
msgstr ""

#: standalone/harddrake2:98
#, fuzzy, c-format
msgid "Disk identifier"
msgstr "เครื่องพิมพ์"

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:99
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, fuzzy, c-format
msgid "Installed size"
msgstr "ติดตั้งระบบ"

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:107
#, fuzzy, c-format
msgid "Enabled Size"
msgstr "enable"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, fuzzy, c-format
msgid "type of the memory device"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr "ความเร็ว"

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:110
#, fuzzy, c-format
msgid "Bank connections"
msgstr "cable connection"

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:115
#, fuzzy, c-format
msgid "Device file"
msgstr "เลือกไฟล์"

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr ""

#: standalone/harddrake2:116
#, fuzzy, c-format
msgid "whether the wheel is emulated or not"
msgstr "Logitech MouseMan"

#: standalone/harddrake2:117
#, fuzzy, c-format
msgid "the type of the mouse"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/harddrake2:118
#, fuzzy, c-format
msgid "the name of the mouse"
msgstr "2 buttons"

#: standalone/harddrake2:119
#, fuzzy, c-format
msgid "Number of buttons"
msgstr "2 buttons"

#: standalone/harddrake2:119
#, fuzzy, c-format
msgid "the number of buttons the mouse has"
msgstr "2 buttons"

#: standalone/harddrake2:120
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:319
#, fuzzy, c-format
msgid "Identification"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#: standalone/harddrake2:129 standalone/harddrake2:145
#, c-format
msgid "Connection"
msgstr "การเชื่อมต่อ"

#: standalone/harddrake2:138
#, fuzzy, c-format
msgid "Performances"
msgstr "ข้อกำหนด: "

#: standalone/harddrake2:139
#, fuzzy, c-format
msgid "Bugs"
msgstr "สิงหาคม"

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr ""

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "อุปกรณ์"

#: standalone/harddrake2:148
#, c-format
msgid "Partitions"
msgstr "พาร์ติชัน"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr "คุณสมบัติ"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:135 standalone/printerdrake:148
#, c-format
msgid "/_Options"
msgstr "/_อ็อปชั่น"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:160 standalone/printerdrake:162
#: standalone/printerdrake:165 standalone/printerdrake:167
#, c-format
msgid "/_Help"
msgstr "/_ช่วยเหลือ"

#: standalone/harddrake2:181
#, fuzzy, c-format
msgid "/Autodetect _printers"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:182
#, fuzzy, c-format
msgid "/Autodetect _modems"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:183
#, fuzzy, c-format
msgid "/Autodetect _jaz drives"
msgstr "ใช้ auto detection"

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr ""

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:192 standalone/printerdrake:141
#, c-format
msgid "/_Quit"
msgstr "/_ออก"

#: standalone/harddrake2:205
#, fuzzy, c-format
msgid "/_Fields description"
msgstr "รายละเอียด"

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr ""

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:222 standalone/printerdrake:165
#, c-format
msgid "/_Report Bug"
msgstr "/_แจ้ง Bug"

#: standalone/harddrake2:224 standalone/printerdrake:167
#, c-format
msgid "/_About..."
msgstr "/_เกี่ยวกับ..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""

#: standalone/harddrake2:242
#, fuzzy, c-format
msgid "Harddrake2"
msgstr "ฮาร์ดแวร์"

#: standalone/harddrake2:256
#, fuzzy, c-format
msgid "Detected hardware"
msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"

#: standalone/harddrake2:261
#, fuzzy, c-format
msgid "Configure module"
msgstr "คอนฟิกเม้าส์"

#: standalone/harddrake2:268
#, c-format
msgid "Run config tool"
msgstr ""

#: standalone/harddrake2:306 standalone/net_monitor:103
#: standalone/net_monitor:104 standalone/net_monitor:109
#, c-format
msgid "unknown"
msgstr "ไม่รู้จัก"

#: standalone/harddrake2:307 standalone/printerdrake:299
#: standalone/printerdrake:337
#, c-format
msgid "Unknown"
msgstr "ไม่รู้จัก"

#: standalone/harddrake2:327
#, c-format
msgid "Misc"
msgstr "เบ็ดเตล็ด"

#: standalone/harddrake2:342
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:394
#, fuzzy, c-format
msgid "secondary"
msgstr "%d วินาที"

#: standalone/harddrake2:394
#, c-format
msgid "primary"
msgstr ""

#: standalone/harddrake2:398
#, fuzzy, c-format
msgid "burner"
msgstr "เครื่องพิมพ์"

#: standalone/harddrake2:398
#, c-format
msgid "DVD"
msgstr "ดีวีดี"

#: standalone/harddrake2:546 standalone/harddrake2:549
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:551
#, c-format
msgid "Account:"
msgstr "บัญชีผู้ใช้:"

#: standalone/harddrake2:552
#, c-format
msgid "Password:"
msgstr "รหัสผ่าน:"

#: standalone/harddrake2:553
#, c-format
msgid "Hostname:"
msgstr "ชื่อโฮสต์:"

#: standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: standalone/localedrake:38
#, fuzzy, c-format
msgid "LocaleDrake"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/localedrake:43
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: standalone/logdrake:49
#, fuzzy, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "Control Center"

#: standalone/logdrake:50
#, fuzzy, c-format
msgid "Logdrake"
msgstr "logdrake"

#: standalone/logdrake:63
#, c-format
msgid "Show only for the selected day"
msgstr ""

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr "/ไฟล์/_ใหม่"

#: standalone/logdrake:70
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr "/ไฟล์/_เปิด"

#: standalone/logdrake:71
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr "/ไฟล์/_บันทึก"

#: standalone/logdrake:72
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr "/ไฟล์/บันทึก_เป็น"

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/ไฟล์/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr "/อ็อปชั่น/ทดลอง"

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:115
#, c-format
msgid "search"
msgstr "ค้นหา"

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr "อุปกรณ์ตรวจสอบ logs"

#: standalone/logdrake:128 standalone/net_applet:293 standalone/net_monitor:94
#, c-format
msgid "Settings"
msgstr "ค่าติดตั้ง"

#: standalone/logdrake:133
#, fuzzy, c-format
msgid "Matching"
msgstr "matching"

#: standalone/logdrake:134
#, c-format
msgid "but not matching"
msgstr "but not matching"

#: standalone/logdrake:138
#, c-format
msgid "Choose file"
msgstr "เลือก file"

#: standalone/logdrake:147
#, c-format
msgid "Calendar"
msgstr "ปฎิทิน"

#: standalone/logdrake:157
#, c-format
msgid "Content of the file"
msgstr "ข้อความของ file"

#: standalone/logdrake:161 standalone/logdrake:399
#, c-format
msgid "Mail alert"
msgstr ""

#: standalone/logdrake:168
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr ""

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "โปรดกรุณารอ,parsing file:%s"

#: standalone/logdrake:376
#, c-format
msgid "Apache World Wide Web Server"
msgstr ""

#: standalone/logdrake:377
#, fuzzy, c-format
msgid "Domain Name Resolver"
msgstr "ชื่อโดเมน"

#: standalone/logdrake:378
#, fuzzy, c-format
msgid "Ftp Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/logdrake:379
#, fuzzy, c-format
msgid "Postfix Mail Server"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/logdrake:380
#, fuzzy, c-format
msgid "Samba Server"
msgstr "เซิร์ฟเวอร์ NIS"

#: standalone/logdrake:382
#, fuzzy, c-format
msgid "Webmin Service"
msgstr "อุปกรณ์"

#: standalone/logdrake:383
#, fuzzy, c-format
msgid "Xinetd Service"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"

#: standalone/logdrake:394
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: standalone/logdrake:395
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:402
#, fuzzy, c-format
msgid "Mail alert configuration"
msgstr "การปรับแต่ง LAN"

#: standalone/logdrake:403
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""

#: standalone/logdrake:406
#, fuzzy, c-format
msgid "What do you want to do?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"

#: standalone/logdrake:413
#, fuzzy, c-format
msgid "Services settings"
msgstr "อุปกรณ์"

#: standalone/logdrake:414
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:421
#, fuzzy, c-format
msgid "Load setting"
msgstr "ฟอร์แมต"

#: standalone/logdrake:422
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: standalone/logdrake:423
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:428
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "การคอนฟิก"

#: standalone/logdrake:429
#, fuzzy, c-format
msgid "Please enter your email address below "
msgstr "โปรดลองอีกครั้ง"

#: standalone/logdrake:430
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""

#: standalone/logdrake:449
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:455
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:514
#, c-format
msgid "Save as.."
msgstr "บันทึกแฟ้มเป็น"

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "คุณมีเม้าส์ชนิดใด"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"

#: standalone/mousedrake:61
#, fuzzy, c-format
msgid "Mouse test"
msgstr "Mouse Systems"

#: standalone/mousedrake:64
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/net_applet:47
#, fuzzy, c-format
msgid "Network is up on interface %s"
msgstr "Network interface"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, fuzzy, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "ไม่มีการคอนฟิกจอภาพ"

#: standalone/net_applet:56 standalone/net_monitor:469
#, fuzzy, c-format
msgid "Connect %s"
msgstr "เชื่อมต่ออยู่"

#: standalone/net_applet:57 standalone/net_monitor:469
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "ยกเลิกติดต่อ..."

#: standalone/net_applet:58
#, fuzzy, c-format
msgid "Monitor Network"
msgstr "เรียกคืนจากไฟล์"

#: standalone/net_applet:59
#, c-format
msgid "Manage wireless networks"
msgstr ""

#: standalone/net_applet:60
#, fuzzy, c-format
msgid "Configure Network"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: standalone/net_applet:62
#, fuzzy, c-format
msgid "Watched interface"
msgstr "Interface"

#: standalone/net_applet:71
#, c-format
msgid "Profiles"
msgstr "โปรไฟล์"

#: standalone/net_applet:80
#, c-format
msgid "Get Online Help"
msgstr ""

#: standalone/net_applet:160
#, fuzzy, c-format
msgid "Unable to select wireless network: %s"
msgstr "ไม่สามารถ forkได้.%s"

#: standalone/net_applet:279
#, fuzzy, c-format
msgid "Interactive intrusion detection"
msgstr "โปรแกรมวาดภาพฟังชั่น"

#: standalone/net_applet:284
#, c-format
msgid "Always launch on startup"
msgstr ""

#: standalone/net_applet:288
#, c-format
msgid "Actions"
msgstr ""

#: standalone/net_applet:330
#, fuzzy, c-format
msgid "Unable to contact daemon"
msgstr "ไม่สามารถ forkได้.%s"

#: standalone/net_applet:349
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr ""

#: standalone/net_applet:350
#, c-format
msgid "The %s service has been attacked by %s."
msgstr ""

#: standalone/net_applet:351
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr ""

#: standalone/net_applet:359
#, fuzzy, c-format
msgid "Active Firewall: intrusion detected"
msgstr "ตรวจพบคอนฟิกของ Firewall"

#: standalone/net_applet:370
#, fuzzy, c-format
msgid "Do you want to blacklist the attacker?"
msgstr "จะเริ่มใช้แป้นเหนียวไหม?"

#: standalone/net_applet:384
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr ""

#: standalone/net_applet:387
#, fuzzy, c-format
msgid "Attack details"
msgstr "รายละเอียด"

#: standalone/net_applet:391
#, fuzzy, c-format
msgid "Attack time: %s"
msgstr "ปฏิบัติการ: %s"

#: standalone/net_applet:392
#, fuzzy, c-format
msgid "Network interface: %s"
msgstr "แผงวงจรระบบเครือข่าย"

#: standalone/net_applet:393
#, fuzzy, c-format
msgid "Attack type: %s"
msgstr "ประเภท: "

#: standalone/net_applet:394
#, fuzzy, c-format
msgid "Protocol: %s"
msgstr "โปรโตคอล"

#: standalone/net_applet:395
#, fuzzy, c-format
msgid "Attacker IP address: %s"
msgstr "ที่อยู่ไอพีตายตัว"

#: standalone/net_applet:396
#, fuzzy, c-format
msgid "Attacker hostname: %s"
msgstr "ไม่สามารถอ่านชื่อโฮสต์: %s\n"

#: standalone/net_applet:397
#, fuzzy, c-format
msgid "Service attacked: %s"
msgstr "ชนิด_บริการ:"

#: standalone/net_applet:398
#, fuzzy, c-format
msgid "Port attacked: %s"
msgstr "Port"

#: standalone/net_applet:399
#, c-format
msgid "Type of ICMP attack: %s"
msgstr ""

#: standalone/net_monitor:58 standalone/net_monitor:63
#, fuzzy, c-format
msgid "Network Monitoring"
msgstr "การคอนฟิกระบบเน็ตเวิร์ก"

#: standalone/net_monitor:99
#, c-format
msgid "Global statistics"
msgstr ""

#: standalone/net_monitor:102
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:102
#, c-format
msgid "Average"
msgstr "ค่าเฉลี่ย"

#: standalone/net_monitor:103
#, fuzzy, c-format
msgid ""
"Sending\n"
"speed:"
msgstr "บันทึกลงไฟล์"

#: standalone/net_monitor:104
#, fuzzy, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr "บันทึกลงไฟล์"

#: standalone/net_monitor:108
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/net_monitor:115
#, c-format
msgid "Use same scale for received and transmitted"
msgstr ""

#: standalone/net_monitor:134
#, fuzzy, c-format
msgid "Wait please, testing your connection..."
msgstr "ทดสอบ connection..."

#: standalone/net_monitor:183 standalone/net_monitor:196
#, fuzzy, c-format
msgid "Disconnecting from Internet "
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:183 standalone/net_monitor:196
#, fuzzy, c-format
msgid "Connecting to Internet "
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:227
#, fuzzy, c-format
msgid "Disconnection from Internet failed."
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:228
#, fuzzy, c-format
msgid "Disconnection from Internet complete."
msgstr "ต่อเข้า Internet "

#: standalone/net_monitor:230
#, fuzzy, c-format
msgid "Connection complete."
msgstr "ชนิดการเชื่อมต่อ"

#: standalone/net_monitor:231
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandriva Linux Control Center."
msgstr ""

#: standalone/net_monitor:336
#, fuzzy, c-format
msgid "Color configuration"
msgstr "การคอนฟิก"

#: standalone/net_monitor:384 standalone/net_monitor:404
#, c-format
msgid "sent: "
msgstr ""

#: standalone/net_monitor:391 standalone/net_monitor:408
#, c-format
msgid "received: "
msgstr ""

#: standalone/net_monitor:398
#, c-format
msgid "average"
msgstr ""

#: standalone/net_monitor:401
#, fuzzy, c-format
msgid "Local measure"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/net_monitor:462
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/net_monitor:473
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "การปรับแต่งการติดต่อเข้า internet"

#: standalone/printerdrake:68
#, fuzzy, c-format
msgid "Reading data of installed printers..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/printerdrake:117
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/printerdrake:131 standalone/printerdrake:132
#: standalone/printerdrake:133 standalone/printerdrake:134
#: standalone/printerdrake:142 standalone/printerdrake:143
#: standalone/printerdrake:147
#, c-format
msgid "/_Actions"
msgstr "/_แบบการทำงาน"

#: standalone/printerdrake:131 standalone/printerdrake:143
#, fuzzy, c-format
msgid "/_Add Printer"
msgstr "เครื่องพิมพ์"

#: standalone/printerdrake:132
#, fuzzy, c-format
msgid "/Set as _Default"
msgstr " (Default)"

#: standalone/printerdrake:133
#, c-format
msgid "/_Edit"
msgstr "/แ_ก้ไข"

#: standalone/printerdrake:134
#, c-format
msgid "/_Delete"
msgstr "/_ลบ"

#: standalone/printerdrake:135
#, c-format
msgid "/_Expert mode"
msgstr "/โหมดผู้เชี่ยวชาญ"

#: standalone/printerdrake:140
#, c-format
msgid "/_Refresh"
msgstr "/เ_รยกใหม"

#: standalone/printerdrake:147
#, c-format
msgid "/_Configure CUPS"
msgstr "/_คอนฟิกระบบ CUPS"

#: standalone/printerdrake:182
#, c-format
msgid "Search:"
msgstr "ค้นหา:"

#: standalone/printerdrake:185
#, c-format
msgid "Apply filter"
msgstr "ใช้ตัวกรอง"

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:212 standalone/printerdrake:219
#, c-format
msgid "Printer Name"
msgstr "ชื่อเครื่องพิมพ์"

#: standalone/printerdrake:212
#, c-format
msgid "Connection Type"
msgstr "ประเภทของการเชื่อมต่อ"

#: standalone/printerdrake:219
#, c-format
msgid "Server Name"
msgstr "ชื่อเซิร์ฟเวอร์"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Add Printer"
msgstr "เครื่องพิมพ์"

#: standalone/printerdrake:227
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "ไม่มีเครื่องพิมพ์"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:230
#, fuzzy, c-format
msgid "Set as default"
msgstr "default"

#: standalone/printerdrake:230
#, fuzzy, c-format
msgid "Set selected printer as the default printer"
msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"

#: standalone/printerdrake:233
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "ค้นพบ %s"

#: standalone/printerdrake:236
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "ลบคิว"

#: standalone/printerdrake:239
#, c-format
msgid "Refresh the list"
msgstr "อ่านค่ารายการใหม่"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "คอนฟิกระบบ X"

#: standalone/printerdrake:242
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: standalone/printerdrake:300 standalone/printerdrake:338
#, c-format
msgid "Enabled"
msgstr "เปิดใช้งาน"

#: standalone/printerdrake:301 standalone/printerdrake:339
#, c-format
msgid "Disabled"
msgstr "ไม่ใช้"

#: standalone/printerdrake:561
#, c-format
msgid "Authors: "
msgstr "ผู้แต่ง:  "

#. -PO: here %s is the version number
#: standalone/printerdrake:571
#, fuzzy, c-format
msgid "Printer Management %s"
msgstr "ไม่มีเครื่องพิมพ์"

#: standalone/scannerdrake:51
#, fuzzy, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/scannerdrake:55
#, fuzzy, c-format
msgid "Aborting Scannerdrake."
msgstr "เลือกกราฟฟิคการ์ด"

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: standalone/scannerdrake:67 standalone/scannerdrake:491
#, fuzzy, c-format
msgid "Searching for configured scanners..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:71 standalone/scannerdrake:495
#, fuzzy, c-format
msgid "Searching for new scanners..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:79 standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr ""

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr ""

#: standalone/scannerdrake:104
#, fuzzy, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: standalone/scannerdrake:131
#, fuzzy, c-format
msgid "Select a scanner model"
msgstr "เลือกกราฟฟิคการ์ด"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, fuzzy, c-format
msgid "Detected model: %s"
msgstr "ค้นพบ %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "พอร์ต: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr ""

#: standalone/scannerdrake:144
#, fuzzy, c-format
msgid "The %s is not supported under Linux."
msgstr "หน้าต่าง \"%s\" ไม่ตอบสนอง"

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr ""

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:200
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:258
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:276
#, fuzzy, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr ""

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""

#: standalone/scannerdrake:308 standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, fuzzy, c-format
msgid "Auto-detect available ports"
msgstr "ใช้ auto detection"

#: standalone/scannerdrake:310 standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr ""

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""

#: standalone/scannerdrake:313 standalone/scannerdrake:358
#, fuzzy, c-format
msgid "choose device"
msgstr "อุปกรณ์บูต"

#: standalone/scannerdrake:347
#, fuzzy, c-format
msgid "Searching for scanners..."
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:383
#, fuzzy, c-format
msgid "Setting up kernel modules..."
msgstr "ลบทิ้ง 1 module"

#: standalone/scannerdrake:390 standalone/scannerdrake:397
#, fuzzy, c-format
msgid "Attention!"
msgstr "ดึงดูดใจ"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:392 standalone/scannerdrake:401
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""

#: standalone/scannerdrake:394 standalone/scannerdrake:403
#, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:398
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""

#: standalone/scannerdrake:399
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:406
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:431
#, fuzzy, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/scannerdrake:432
#, fuzzy, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr ""

#: standalone/scannerdrake:452
#, fuzzy, c-format
msgid "Search for new scanners"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr ""

#: standalone/scannerdrake:465
#, fuzzy, c-format
msgid "Install/Update firmware files"
msgstr "เลือกไฟล์"

#: standalone/scannerdrake:471
#, fuzzy, c-format
msgid "Scanner sharing"
msgstr "เครื่องพิมพ์"

#: standalone/scannerdrake:530 standalone/scannerdrake:695
#, fuzzy, c-format
msgid "All remote machines"
msgstr "เครื่องพิมพ์แบบรีโมท"

#: standalone/scannerdrake:542 standalone/scannerdrake:845
#, fuzzy, c-format
msgid "This machine"
msgstr "matching"

#: standalone/scannerdrake:582
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:583
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr ""

#: standalone/scannerdrake:588
#, fuzzy, c-format
msgid "Scanner sharing to hosts: "
msgstr "เครื่องพิมพ์"

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr ""

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr ""

#: standalone/scannerdrake:632 standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, fuzzy, c-format
msgid "Sharing of local scanners"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#: standalone/scannerdrake:633
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:644 standalone/scannerdrake:794
#, fuzzy, c-format
msgid "Add host"
msgstr "เพิ่มผู้ใช้"

#: standalone/scannerdrake:650 standalone/scannerdrake:800
#, fuzzy, c-format
msgid "Edit selected host"
msgstr "ค้นพบ %s"

#: standalone/scannerdrake:659 standalone/scannerdrake:809
#, fuzzy, c-format
msgid "Remove selected host"
msgstr "ลบคิว"

#: standalone/scannerdrake:683 standalone/scannerdrake:691
#: standalone/scannerdrake:696 standalone/scannerdrake:742
#: standalone/scannerdrake:833 standalone/scannerdrake:841
#: standalone/scannerdrake:846 standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr ""

#: standalone/scannerdrake:705 standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:716 standalone/scannerdrake:866
#, fuzzy, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "กรุณาทดสอบเม้าส์"

#: standalone/scannerdrake:727 standalone/scannerdrake:877
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""

#: standalone/scannerdrake:782
#, fuzzy, c-format
msgid "Usage of remote scanners"
msgstr "ใช้พื้นที่ที่ว่าง"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: standalone/scannerdrake:940
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"

#: standalone/scannerdrake:944 standalone/scannerdrake:948
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: standalone/service_harddrake:104
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: standalone/service_harddrake:105
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:108
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"

#: standalone/service_harddrake:109
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:206
#, fuzzy, c-format
msgid "Hardware probing in progress"
msgstr "ค้นหาเจอบน port %s"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "เลือกภาษาที่คุณใช้"

#: steps.pm:15
#, c-format
msgid "License"
msgstr ""

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "คอนฟิกเม้าส์"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "การตรวจหาฮาร์ดไดรว์"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "เลือกชุดการติดตั้ง"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "เลือกคีย์บอร์ด"

#: steps.pm:21
#, fuzzy, c-format
msgid "Partitioning"
msgstr "เครื่องพิมพ์"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "ฟอร์แมตพาร์ติชั่น"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "เลือกแพ็คเก็จ"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "ติดตั้งระบบ"

#: steps.pm:25
#, fuzzy, c-format
msgid "Administrator password"
msgstr "เซ็ตรหัสผ่านรูท"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "เพิ่มผู้ใช้"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "คอนฟิกระบบเน็ตเวิร์ก"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "ติดตั้งบูตโหลดเดอร์"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "คอนฟิกระบบ X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "ปรับแต่งการบริการต่างๆ"

#: steps.pm:32
#, fuzzy, c-format
msgid "Install updates"
msgstr "ติดตั้งระบบ"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "ออกจากการติดตั้ง"

#: ugtk2.pm:916
#, c-format
msgid "Is this correct?"
msgstr "ถูกต้องหรือไม่?"

#: ugtk2.pm:976
#, fuzzy, c-format
msgid "No file chosen"
msgstr "ตัวเลือกแฟ้ม"

#: ugtk2.pm:978
#, fuzzy, c-format
msgid "You have chosen a file, not a directory"
msgstr "ไม่มีไฟล์หรือไดเรกทอรีเช่นนี้"

#: ugtk2.pm:980
#, fuzzy, c-format
msgid "You have chosen a directory, not a file"
msgstr "ไม่พบไดเร็กทอรีส่วนตัวของคุณ"

#: ugtk2.pm:982
#, fuzzy, c-format
msgid "No such directory"
msgstr "ไม่ใช่โฟลเดอร์"

#: ugtk2.pm:982
#, fuzzy, c-format
msgid "No such file"
msgstr "ไม่มีไฟล์"

#: ugtk2.pm:1063
#, c-format
msgid "Expand Tree"
msgstr "ขยาย tree"

#: ugtk2.pm:1064
#, c-format
msgid "Collapse Tree"
msgstr "ยุบ tree"

#: ugtk2.pm:1065
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "การติดตั้งไม่สำเร็จ"

#~ msgid "Grub"
#~ msgstr "Grub"

#, fuzzy
#~ msgid "Local Network adress"
#~ msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#~ msgid "Configuring scripts, installing software, starting servers..."
#~ msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."

#~ msgid "drakfloppy"
#~ msgstr "drakfloppy"

#, fuzzy
#~ msgid "Boot disk creation"
#~ msgstr "สร้าง boot disk"

#~ msgid "General"
#~ msgstr "ทั่วไป"

#, fuzzy
#~ msgid "Kernel version"
#~ msgstr "kernel version"

#~ msgid "Preferences"
#~ msgstr "ตั้งค่าคุณสมบัติ"

#, fuzzy
#~ msgid "Advanced preferences"
#~ msgstr "การปรับแต่ง LAN"

#~ msgid "Size"
#~ msgstr "ขนาด"

#, fuzzy
#~ msgid "Mkinitrd optional arguments"
#~ msgstr "mkinitrd optional arguments"

#~ msgid "force"
#~ msgstr "บังคับ"

#~ msgid "omit raid modules"
#~ msgstr "ยกเว้น raid modules"

#~ msgid "if needed"
#~ msgstr "ถ้าต้องการ"

#~ msgid "omit scsi modules"
#~ msgstr "ยกเว้น scsi modules"

#~ msgid "Add a module"
#~ msgstr "เพิ่ม 1 module"

#~ msgid "Remove a module"
#~ msgstr "ลบทิ้ง 1 module"

#~ msgid "Be sure a media is present for the device %s"
#~ msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"

#, fuzzy
#~ msgid ""
#~ "There is no medium or it is write-protected for device %s.\n"
#~ "Please insert one."
#~ msgstr ""
#~ "ยังไม่มีอุปกรณ์ใน %s \n"
#~ "กรุณาใส่อุปกรณ์ด้วย"

#~ msgid "Unable to fork: %s"
#~ msgstr "ไม่สามารถ forkได้.%s"

#, fuzzy
#~ msgid "Floppy creation completed"
#~ msgstr "ชนิดการเชื่อมต่อ"

#, fuzzy
#~ msgid ""
#~ "Unable to properly close mkbootdisk:\n"
#~ "\n"
#~ "<span foreground=\"Red\"><tt>%s</tt></span>"
#~ msgstr ""
#~ "ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
#~ "%s \n"
#~ "%s"

#~ msgid "You can not use a LVM Logical Volume for mount point %s"
#~ msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"

#, fuzzy
#~ msgid ""
#~ "You've selected a LVM Logical Volume as root (/).\n"
#~ "The bootloader is not able to handle this without a /boot partition.\n"
#~ "Please be sure to add a /boot partition"
#~ msgstr ""
#~ "คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
#~ "bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
#~ "เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"

#~ msgid "use PPPoE"
#~ msgstr "ใช้ PPPoE"

#~ msgid "use PPTP"
#~ msgstr "ใช้ PPTP"

#~ msgid "use DHCP"
#~ msgstr "ใช้ DHCP"

#, fuzzy
#~ msgid "Alcatel Speedtouch USB"
#~ msgstr "กรุณาทดสอบเม้าส์"

#, fuzzy
#~ msgid " - detected"
#~ msgstr "ค้นพบ %s"

#, fuzzy
#~ msgid "PXE Server Configuration"
#~ msgstr "การปรับแต่ง LAN"

#, fuzzy
#~ msgid "Installation Server Configuration"
#~ msgstr "การปรับแต่ง LAN"

#, fuzzy
#~ msgid ""
#~ "You are about to configure your computer to install a PXE server as a "
#~ "DHCP server\n"
#~ "and a TFTP server to build an installation server.\n"
#~ "With that feature, other computers on your local network will be "
#~ "installable using this computer as source.\n"
#~ "\n"
#~ "Make sure you have configured your Network/Internet access using "
#~ "drakconnect before going any further.\n"
#~ "\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN)."
#~ msgstr ""
#~ "ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
#~ "คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
#~ "(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
#~ "\n"
#~ "คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"

#~ msgid "No network adapter on your system!"
#~ msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"

#~ msgid "Choose the network interface"
#~ msgstr "เลือก network interface"

#, fuzzy
#~ msgid ""
#~ "Please choose which network interface will be used for the dhcp server."
#~ msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"

#, fuzzy
#~ msgid "Interface %s (on network %s)"
#~ msgstr "Interface %s (using module %s)"

#, fuzzy
#~ msgid "Installation image directory"
#~ msgstr "การปรับแต่ง LAN"

#, fuzzy
#~ msgid "No image found"
#~ msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#, fuzzy
#~ msgid "Location of auto_install.cfg file"
#~ msgstr "กำลังเตรียมการติดตั้งลงบน floppy"

#~ msgid "Internet Connection Sharing currently disabled"
#~ msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"

#~ msgid "Enabling servers..."
#~ msgstr "เริ่มทำงาน server"

#~ msgid "Internet Connection Sharing currently enabled"
#~ msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"

#~ msgid "Interface %s (using module %s)"
#~ msgstr "Interface %s (using module %s)"

#~ msgid "Interface %s"
#~ msgstr "Interface %s"

#, fuzzy
#~ msgid "Network interface already configured"
#~ msgstr "ไม่มีการคอนฟิกจอภาพ"

#, fuzzy
#~ msgid "Show current interface configuration"
#~ msgstr "การคอนฟิก Internet"

#, fuzzy
#~ msgid "Current interface configuration"
#~ msgstr "การคอนฟิก Internet"

#, fuzzy
#~ msgid "(This) DHCP Server IP"
#~ msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"

#, fuzzy
#~ msgid ""
#~ "WARNING: this device has been previously configured to connect to the "
#~ "Internet.\n"
#~ "Modifying the fields below will override this configuration.\n"
#~ "Do you really want to reconfigure this device?"
#~ msgstr ""
#~ "คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
#~ "คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
#~ " "

#, fuzzy
#~ msgid "tape"
#~ msgstr "ประเภท"

#, fuzzy
#~ msgid "first step creation"
#~ msgstr "สร้าง boot disk"

#, fuzzy
#~ msgid "choose image file"
#~ msgstr "เลือกกิจกรรม"

#~ msgid "Browse"
#~ msgstr "ค้นหา"

#, fuzzy
#~ msgid "Configure bootsplash picture"
#~ msgstr "ปรับแต่งการบริการต่างๆ"

#~ msgid "Preview"
#~ msgstr "ตัวอย่าง"

#, fuzzy
#~ msgid "Choose color"
#~ msgstr "เลือกจอภาพ"

#, fuzzy
#~ msgid "Notice"
#~ msgstr "NoVideo"

#, fuzzy
#~ msgid "You must choose an image file first!"
#~ msgstr "อุปกรณ์เครื่องพิมพ์ URI"

#, fuzzy
#~ msgid "Generating preview..."
#~ msgstr "กำลังตรวจสอบอุปกรณ์..."

#~ msgid "No floppy drive available"
#~ msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"

#, fuzzy
#~ msgid "Please insert the Update Modules floppy in drive %s"
#~ msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "

#, fuzzy
#~ msgid ""
#~ "_: keyboard\n"
#~ "Tifinagh (+latin/arabic)"
#~ msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"

#, fuzzy
#~ msgid "No network card"
#~ msgstr "ไม่พบการ์ดเน็ตเวิร์ก"

#~ msgid ""
#~ "Insert a floppy in drive\n"
#~ "All data on this floppy will be lost"
#~ msgstr ""
#~ "กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
#~ "ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"

#~ msgid "Insert a FAT formatted floppy in drive %s"
#~ msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"

#~ msgid "This floppy is not FAT formatted"
#~ msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"

#~ msgid ""
#~ "To use this saved packages selection, boot installation with ``linux "
#~ "defcfg=floppy''"
#~ msgstr ""
#~ "To use this saved packages selection, boot installation with ``linux "
#~ "defcfg=floppy''"

#, fuzzy
#~ msgid "Load/Save on floppy"
#~ msgstr "บันทึกลงแผ่นฟล้อปปี้"

#, fuzzy
#~ msgid "Load from floppy"
#~ msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#~ msgid "Save on floppy"
#~ msgstr "บันทึกลงแผ่นฟล้อปปี้"

#, fuzzy
#~ msgid "Package selection"
#~ msgstr "เลือกกลุ่มแพ็คเก็จ"

#, fuzzy
#~ msgid "Loading from floppy"
#~ msgstr "เรียกคืนจากแผ่นฟล้อปปี้"

#, fuzzy
#~ msgid "Insert a floppy containing package selection"
#~ msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"

#~ msgid "Installing HPOJ package..."
#~ msgstr "กำลังติดตั้งแพ็คเก็จ %s..."

#, fuzzy
#~ msgid "Application:"
#~ msgstr "การตรวจสอบสิทธิ์การใช้งาน"

#, fuzzy
#~ msgid "Release: "
#~ msgstr "โปรดรอสักครู่"

#, fuzzy
#~ msgid "Summary: "
#~ msgstr "รวมความ"

#, fuzzy
#~ msgid "Submit kernel version"
#~ msgstr "kernel version"

#, fuzzy
#~ msgid "connecting to %s..."
#~ msgstr "อ่าน CUPS drivers database..."

#, fuzzy
#~ msgid "Please enter a package name."
#~ msgstr "โปรดป้อนชื่อผู้ใช้"

#, fuzzy
#~ msgid "Loading printer configuration... Please wait"
#~ msgstr "การคอนฟิก Internet"

#, fuzzy
#~ msgid "The "
#~ msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"

#, fuzzy
#~ msgid "%s (was %s)"
#~ msgstr "Port"

#, fuzzy
#~ msgid "Root password"
#~ msgstr "ไม่มีรหัสผ่าน"

#, fuzzy
#~ msgid "Do you want to recover your system?"
#~ msgstr "คุณต้องการใช้ aboot หรือไม่"

#, fuzzy
#~ msgid "Samba server"
#~ msgstr "เซิร์ฟเวอร์ NIS"

#~ msgid "Move"
#~ msgstr "ย้าย"

#~ msgid "Which disk do you want to move it to?"
#~ msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"

#~ msgid "Sector"
#~ msgstr "เซ็กเตอร์"

#~ msgid "Which sector do you want to move it to?"
#~ msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"

#~ msgid "Moving"
#~ msgstr "ย้าย"

#~ msgid "Moving partition..."
#~ msgstr "ย้ายพาร์ติชั่น..."

#~ msgid "Error opening %s for writing: %s"
#~ msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"

#, fuzzy
#~ msgid "Server Information:"
#~ msgstr "แสดงข้อมูล"

#, fuzzy
#~ msgid "Use SSL connection"
#~ msgstr "LAN connection"

#, fuzzy
#~ msgid "User Base:"
#~ msgstr "ชื่อผู้ใช้"

#, fuzzy
#~ msgid "Base:"
#~ msgstr "ชื่อ:"

#, fuzzy
#~ msgid "Scope:"
#~ msgstr "เซ็กเตอร์"

#, fuzzy
#~ msgid "Bind Server:"
#~ msgstr "เซิร์ฟเวอร์"

#~ msgid "OK"
#~ msgstr "OK"

#~ msgid "Czech (QWERTZ)"
#~ msgstr "เชคโกสโลวาเกีย (QWERTZ)"

#~ msgid "German"
#~ msgstr "เยอรมัน"

#~ msgid "Dvorak"
#~ msgstr "Dvorak"

#~ msgid "Spanish"
#~ msgstr "สเปน"

#~ msgid "Finnish"
#~ msgstr "ฟินแลนด์"

#~ msgid "French"
#~ msgstr "ฝรั่งเศษ"

#~ msgid "Norwegian"
#~ msgstr "นอร์เวย์"

#~ msgid "Polish"
#~ msgstr "โปแลนด์"

#~ msgid "Russian"
#~ msgstr "รัสเซีย"

#~ msgid "Swedish"
#~ msgstr "สวีเดน"

#, fuzzy
#~ msgid "Albanian"
#~ msgstr "Iranian"

#~ msgid "Armenian (old)"
#~ msgstr "อาร์เมเนียน (เก่า)"

#~ msgid "Armenian (typewriter)"
#~ msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#~ msgid "Armenian (phonetic)"
#~ msgstr "อาร์เมเนียน (โฟเนติค)"

#~ msgid "Azerbaidjani (latin)"
#~ msgstr "Azerbaidjani (latin)"

#~ msgid "Belgian"
#~ msgstr "เบลเยี่ยม"

#, fuzzy
#~ msgid "Bengali"
#~ msgstr "enable"

#, fuzzy
#~ msgid "Bulgarian (phonetic)"
#~ msgstr "อาร์เมเนียน (โฟเนติค)"

#, fuzzy
#~ msgid "Bulgarian (BDS)"
#~ msgstr "บัลกาเรีย"

#~ msgid "Brazilian (ABNT-2)"
#~ msgstr "บราซิล"

#, fuzzy
#~ msgid "Bosnian"
#~ msgstr "Estonian"

#~ msgid "Belarusian"
#~ msgstr "Belarusian"

#~ msgid "Swiss (German layout)"
#~ msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"

#~ msgid "Swiss (French layout)"
#~ msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"

#~ msgid "Czech (QWERTY)"
#~ msgstr "เชคโกสโลวาเกีย (QWERTY)"

#~ msgid "German (no dead keys)"
#~ msgstr "German (no dead keys)"

#~ msgid "Danish"
#~ msgstr "เดนมาร์ก"

#~ msgid "Dvorak (US)"
#~ msgstr "Dvorak (US)"

#, fuzzy
#~ msgid "Dvorak (Esperanto)"
#~ msgstr "Dvorak (Norwegian)"

#~ msgid "Dvorak (Norwegian)"
#~ msgstr "Dvorak (Norwegian)"

#, fuzzy
#~ msgid "Dvorak (Swedish)"
#~ msgstr "Dvorak (US)"

#~ msgid "Estonian"
#~ msgstr "Estonian"

#~ msgid "Georgian (\"Russian\" layout)"
#~ msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"

#~ msgid "Georgian (\"Latin\" layout)"
#~ msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"

#~ msgid "Greek"
#~ msgstr "กรีก"

#~ msgid "Hungarian"
#~ msgstr "อังการี"

#~ msgid "Croatian"
#~ msgstr "Croatian"

#~ msgid "Israeli"
#~ msgstr "อิสราเอล"

#~ msgid "Israeli (Phonetic)"
#~ msgstr "อิลราเอล (โฟเนติค)"

#~ msgid "Iranian"
#~ msgstr "Iranian"

#~ msgid "Icelandic"
#~ msgstr "ไอซ์แลนด์"

#~ msgid "Italian"
#~ msgstr "อิตาลี"

#~ msgid "Japanese 106 keys"
#~ msgstr "Japanese 106 keys"

#, fuzzy
#~ msgid "Kannada"
#~ msgstr "ปฎิทิน"

#~ msgid "Korean keyboard"
#~ msgstr "Korean keyboard"

#, fuzzy
#~ msgid "Kyrgyz keyboard"
#~ msgstr "อังกฤษ"

#~ msgid "Latin American"
#~ msgstr "ละตินอเมริกา"

#, fuzzy
#~ msgid "Laotian"
#~ msgstr "ตำแหน่ง"

#~ msgid "Lithuanian AZERTY (old)"
#~ msgstr "Lithuanian AZERTY (old)"

#~ msgid "Lithuanian AZERTY (new)"
#~ msgstr "Lithuanian AZERTY (new)"

#~ msgid "Lithuanian \"number row\" QWERTY"
#~ msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"

#~ msgid "Lithuanian \"phonetic\" QWERTY"
#~ msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"

#, fuzzy
#~ msgid "Latvian"
#~ msgstr "ตำแหน่ง"

#~ msgid "Macedonian"
#~ msgstr "Macedonian"

#, fuzzy
#~ msgid "Mongolian (cyrillic)"
#~ msgstr "Azerbaidjani (cyrillic)"

#~ msgid "Dutch"
#~ msgstr "ฮอลแลนด์"

#~ msgid "Polish (qwerty layout)"
#~ msgstr "Polish (qwerty layout)"

#~ msgid "Polish (qwertz layout)"
#~ msgstr "Polish (qwertz layout)"

#~ msgid "Portuguese"
#~ msgstr "โปรตุเกส"

#~ msgid "Canadian (Quebec)"
#~ msgstr "คานาดา (ควิเบค)"

#~ msgid "Russian (Phonetic)"
#~ msgstr "รัสเซีย (โฟเนติค)"

#, fuzzy
#~ msgid "Saami (norwegian)"
#~ msgstr "Dvorak (Norwegian)"

#~ msgid "Slovenian"
#~ msgstr "สโลวาเนีย"

#~ msgid "Slovakian (QWERTZ)"
#~ msgstr "สโลวาเกีย (QWERTZ)"

#~ msgid "Slovakian (QWERTY)"
#~ msgstr "สโลวาเกีย (QWERTY)"

#, fuzzy
#~ msgid "Serbian (cyrillic)"
#~ msgstr "Azerbaidjani (cyrillic)"

#, fuzzy
#~ msgid "Syriac"
#~ msgstr "พอร์ตอนุกรม"

#, fuzzy
#~ msgid "Syriac (phonetic)"
#~ msgstr "อาร์เมเนียน (โฟเนติค)"

#, fuzzy
#~ msgid "Telugu"
#~ msgstr "เบลเยี่ยม"

#, fuzzy
#~ msgid "Tamil (Typewriter-layout)"
#~ msgstr "อาร์เมเนียน (พิมพ์ดีด)"

#~ msgid "Thai keyboard"
#~ msgstr "ไทย"

#, fuzzy
#~ msgid "Tajik keyboard"
#~ msgstr "ไทย"

#~ msgid "Turkish (traditional \"F\" model)"
#~ msgstr "ตุรกี (โมเดลแบบแผน \"F\")"

#~ msgid "Turkish (modern \"Q\" model)"
#~ msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"

#~ msgid "Ukrainian"
#~ msgstr "ยูเครน"

#, fuzzy
#~ msgid "Uzbek (cyrillic)"
#~ msgstr "Azerbaidjani (cyrillic)"

#~ msgid "Vietnamese \"numeric row\" QWERTY"
#~ msgstr "Vietnamese \"numeric row\" QWERTY"

#, fuzzy
#~ msgid "Yugoslavian (latin)"
#~ msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"

#, fuzzy
#~ msgid "No devices found"
#~ msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"

#~ msgid "Enable multiple profiles"
#~ msgstr "Enable multiple profiles"

#~ msgid ""
#~ "You may now provide options to module %s.\n"
#~ "Options are in format ``name=value name2=value2...''.\n"
#~ "For instance, ``io=0x300 irq=7''"
#~ msgstr ""
#~ "คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
#~ "อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
#~ "ตัวอย่างเช่น, ``io=0x300 irq=7''"

#~ msgid "Installation of %s failed. The following error occurred:"
#~ msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"

#~ msgid "Use auto detection"
#~ msgstr "ใช้ auto detection"

#~ msgid "/dev/hda"
#~ msgstr "/dev/hda"

#~ msgid "/dev/hdb"
#~ msgstr "/dev/hdb"

#~ msgid "/dev/fd0"
#~ msgstr "/dev/fd0"

#~ msgid ""
#~ "No ethernet network adapter has been detected on your system.\n"
#~ "I cannot set up this connection type."
#~ msgstr ""
#~ "ไม่พบการ์ด ethernet \n"
#~ "ผมไม่สามารถจัดทำการติดต่อชนิดนี้"

#~ msgid ""
#~ "Please choose which network adapter you want to use to connect to "
#~ "Internet."
#~ msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"

#~ msgid "chunk size"
#~ msgstr "ขนาดของ chunk"

#~ msgid "mkraid failed (maybe raidtools are missing?)"
#~ msgstr "mkraid failed (maybe raidtools are missing?)"

#~ msgid "mkraid failed"
#~ msgstr "mkraid failed"

#~ msgid "SILO Installation"
#~ msgstr "การติดตั้ง SILO"

#~ msgid "First sector of boot partition"
#~ msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"

#~ msgid "Bootloader installation"
#~ msgstr "การติดตั้ง Bootloader"

#~ msgid "SILO"
#~ msgstr "SILO"

#~ msgid "4 billion colors (32 bits)"
#~ msgstr "สี่พันล้านสี (32 บิต)"

#~ msgid "XFree86 server: %s\n"
#~ msgstr "เซิร์ฟเวอร์ XFree86: %s\n"

#~ msgid "Here is the full list of keyboards available"
#~ msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"

#~ msgid "Provider dns 1 (optional)"
#~ msgstr "ผู้ให้บริการ dns 1 (optional)"

#~ msgid "Provider dns 2 (optional)"
#~ msgstr "ผู้ให้บริการ dns 2 (optional)"

#~ msgid "What kind is your ISDN connection?"
#~ msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"

#~ msgid ""
#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
#~ "select a PCI card on the next screen."
#~ msgstr ""
#~ "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"

#~ msgid "No ISDN PCI card found. Please select one on the next screen."
#~ msgstr "ไม่พบการ์ด ISDN PCI  กรุณาเลือกจากหน้าต่อไป"

#~ msgid "Scientific Workstation"
#~ msgstr "Workstation ทางวิทยาศาสตร์"

#~ msgid "Compact"
#~ msgstr "แบบอัด (Compact)"