# Drak X # Copyright (C) 2002 Mandriva # # NOTE: use UTF-8 only # # prabu , 2002. # msgid "" msgstr "" "Project-Id-Version: DrakX 1.0\n" "POT-Creation-Date: 2005-09-16 17:08+0200\n" "PO-Revision-Date: 2002-09-06 00:35+0800\n" "Last-Translator: prabu anand \n" "Language-Team: Tamil \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: ../move/move.pm:292 #, fuzzy, c-format msgid "Which USB key do you want to format?" msgstr "நீங்கள் எந்த வகையான நுழைவை சேர்க்க போகிறீர்கள்?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" #: ../move/move.pm:448 ../move/move.pm:460 #, fuzzy, c-format msgid "Key is not writable" msgstr "நிறுவப்படவில்ைல" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "மீட்கவும்" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1326 #, c-format msgid "Reboot" msgstr "மறுெதாடக்கம்" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "" #: ../move/move.pm:517 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, fuzzy, c-format msgid "Auto configuration" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: ../move/move.pm:556 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558 #: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19 #: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1770 #: install_any.pm:1822 install_steps.pm:81 install_steps_interactive.pm:37 #: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27 #: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89 #: network/ndiswrapper.pm:101 network/netconnect.pm:835 #: network/netconnect.pm:934 network/netconnect.pm:938 #: network/netconnect.pm:942 network/netconnect.pm:947 #: network/netconnect.pm:1092 network/netconnect.pm:1096 #: network/netconnect.pm:1215 network/netconnect.pm:1220 #: network/netconnect.pm:1240 network/netconnect.pm:1394 #: network/thirdparty.pm:319 network/thirdparty.pm:326 #: network/thirdparty.pm:370 network/thirdparty.pm:372 #: network/thirdparty.pm:393 network/thirdparty.pm:417 #: printer/printerdrake.pm:244 printer/printerdrake.pm:251 #: printer/printerdrake.pm:276 printer/printerdrake.pm:422 #: printer/printerdrake.pm:427 printer/printerdrake.pm:440 #: printer/printerdrake.pm:450 printer/printerdrake.pm:514 #: printer/printerdrake.pm:686 printer/printerdrake.pm:690 #: printer/printerdrake.pm:772 printer/printerdrake.pm:1576 #: printer/printerdrake.pm:1624 printer/printerdrake.pm:1661 #: printer/printerdrake.pm:1706 printer/printerdrake.pm:1710 #: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816 #: printer/printerdrake.pm:1897 printer/printerdrake.pm:1901 #: printer/printerdrake.pm:1905 printer/printerdrake.pm:1954 #: printer/printerdrake.pm:2012 printer/printerdrake.pm:2016 #: printer/printerdrake.pm:2030 printer/printerdrake.pm:2150 #: printer/printerdrake.pm:2154 printer/printerdrake.pm:2197 #: printer/printerdrake.pm:2272 printer/printerdrake.pm:2290 #: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308 #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2383 #: printer/printerdrake.pm:2478 printer/printerdrake.pm:3037 #: printer/printerdrake.pm:3321 printer/printerdrake.pm:3327 #: printer/printerdrake.pm:3891 printer/printerdrake.pm:3895 #: printer/printerdrake.pm:3899 printer/printerdrake.pm:4360 #: printer/printerdrake.pm:4601 printer/printerdrake.pm:4629 #: printer/printerdrake.pm:4706 printer/printerdrake.pm:4772 #: printer/printerdrake.pm:4892 standalone/drakTermServ:394 #: standalone/drakTermServ:464 standalone/drakTermServ:473 #: standalone/drakTermServ:774 standalone/drakTermServ:781 #: standalone/drakTermServ:802 standalone/drakTermServ:849 #: standalone/drakTermServ:1095 standalone/drakTermServ:1572 #: standalone/drakTermServ:1588 standalone/drakTermServ:1593 #: standalone/drakTermServ:1601 standalone/drakTermServ:1613 #: standalone/drakTermServ:1634 standalone/drakauth:36 #: standalone/drakbackup:498 standalone/drakbackup:612 #: standalone/drakbackup:1093 standalone/drakbackup:1125 #: standalone/drakbackup:1648 standalone/drakbackup:1804 #: standalone/drakbackup:2429 standalone/drakbackup:4118 #: standalone/drakbackup:4338 standalone/drakclock:124 #: standalone/drakconnect:676 standalone/drakconnect:680 #: standalone/drakconnect:685 standalone/drakconnect:700 #: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616 #: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:379 #: standalone/draksambashare:383 standalone/draksambashare:386 #: standalone/draksambashare:389 standalone/draksambashare:449 #: standalone/draksambashare:473 standalone/draksambashare:547 #: standalone/draksambashare:629 standalone/draksambashare:696 #: standalone/draksambashare:796 standalone/draksambashare:803 #: standalone/draksambashare:938 standalone/draksambashare:1129 #: standalone/draksambashare:1138 standalone/draksambashare:1147 #: standalone/draksambashare:1168 standalone/draksambashare:1177 #: standalone/draksambashare:1186 standalone/draksambashare:1206 #: standalone/draksambashare:1214 standalone/draksambashare:1226 #: standalone/draksplash:162 standalone/drakxtv:107 #: standalone/finish-install:49 standalone/logdrake:171 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "பிழை" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "பிழை நேர்ந்துள்ளது மன்னிக்கவும் எனக்கு என்ன செய்வதென்று தெரியவில்ைல\n" "தொடர்ந்து செல்வது உங்கள் பொறுப்பு" #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "பிழை நேர்ந்துள்ளது மன்னிக்கவும்" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, fuzzy, c-format msgid "Remove system config files" msgstr "கண்ணியின் கோப்ேபா நீக்கவா?" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:71 #, fuzzy, c-format msgid "Kill those programs" msgstr "X நிரல்களுக்கான அனுமதி" #: ../move/tree/mdk_totem:72 #, fuzzy, c-format msgid "No CDROM support" msgstr "வாெனாலி ஆதரவு" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 #: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062 #: diskdrake/interactive.pm:1115 #, c-format msgid "Read carefully!" msgstr "கவனமாக படிக்கவும்" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 kB கிலோபைட்" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 kB கிலோபைட்" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB மெகாபைட்" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB மெகாபைட்" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB மெகாபைட்" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB மெகாபைட்" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB மெகாபைட்" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB மெகாபைட்" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB மெகாபைட் அல்லது அதற்கு அதிகமாக" #: Xconfig/card.pm:155 #, c-format msgid "X server" msgstr "X-பரிமாறி" #: Xconfig/card.pm:156 #, c-format msgid "Choose an X server" msgstr "X-பரிமாறியைத் தேர்வு செய்" #: Xconfig/card.pm:188 #, c-format msgid "Multi-head configuration" msgstr "பல்திரையக வடிவமைப்பு" #: Xconfig/card.pm:189 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "உங்கள் கணினி அமைப்பு பல்திரையக வடிவமைப்பில் வேலைச் செய்யும்\n" "நீங்கள் என்ன செய்ய விரும்புகிறீர்கள்?" #: Xconfig/card.pm:258 #, fuzzy, c-format msgid "Can not install Xorg package: %s" msgstr "%s பொதி நிறுவப்படுகிறது" #: Xconfig/card.pm:268 #, c-format msgid "Select the memory size of your graphics card" msgstr "உங்கள் காட்சியமைப்பு அட்ைடயின் நினைவகத்தின் அளவைத் தேர்ந்ெதடுங்கள்" #: Xconfig/card.pm:357 #, c-format msgid "Xorg configuration" msgstr "X வடிவமைப்பு" #: Xconfig/card.pm:359 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "எவ்வித X வடிவமைப்ேபா வைத்துக்ெகாள்ள விரும்புகிறீர்கள்?" #: Xconfig/card.pm:392 #, c-format msgid "Configure all heads independently" msgstr "அனைத்து திரைகளையும் தனித்தனியாக வடிவமைக்கவும்" #: Xconfig/card.pm:393 #, c-format msgid "Use Xinerama extension" msgstr "சினிராமா நீட்டிப்புகளை பயன்படுத்தவும்" #: Xconfig/card.pm:398 #, c-format msgid "Configure only card \"%s\"%s" msgstr "\"%s\"%s என்ற அட்ைடயை மட்டும் வடிவமைக்கவும்" #: Xconfig/card.pm:410 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "X- %s" #: Xconfig/card.pm:417 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "வன்ெபாருள் முடுக்கத்துடன் கூடிய 3D X- %s" #: Xconfig/card.pm:419 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "உங்களுக்கு 3D வன்ெபாருள் முடுக்கத்துடன் X %s கிடைக்கும்" #: Xconfig/card.pm:425 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "உங்களுக்கு 3D வன்ெபாருள் முடுக்கத்துடன் X %s ஆராய்ச்சி முறையில் கிடைக்கும்" #: Xconfig/card.pm:427 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "உங்களுக்கு 3D வன்ெபாருள் முடுக்கத்துடன் X %s ஆராய்ச்சி முறையில் கிடைக்கும் ஆனால் இது " "உங்கள் கணினியை செயலிழக்கச் செய்யலாம்" #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973 #, c-format msgid "Custom" msgstr "தனிப்பயனாக்கம்" #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 install_steps_interactive.pm:1326 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899 #: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93 #: standalone/logdrake:176 standalone/net_applet:102 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "வெளிச்ெசல்" #: Xconfig/main.pm:129 #, c-format msgid "Graphic Card" msgstr "காட்சியமைப்பு அட்ைட" #: Xconfig/main.pm:132 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "திரையகம்" #: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287 #, c-format msgid "Resolution" msgstr "பரிமாணங்கள்" #: Xconfig/main.pm:138 #, c-format msgid "Test" msgstr "சோதனை" #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #: printer/printerdrake.pm:1125 standalone/drakfont:491 #: standalone/drakfont:554 #, c-format msgid "Options" msgstr "விருப்பத்ேதர்வுகள்" #: Xconfig/main.pm:178 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "" #: Xconfig/main.pm:196 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "இந்த மாற்றங்களை அப்படியே வைத்துக்ெகாள்கிறீர்களா?\n" "தற்ேபாதைய வடிவமைப்பு\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, fuzzy, c-format msgid "Choose a monitor for head #%d" msgstr "திரையகத்ைத தேர்வுச் செய்" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "திரையகத்ைத தேர்வுச் செய்" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play -1997 க்கு பிறகு வந்த திரையகங்கள் இவ்வகையைச் சேரும்" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "பொது-இன திரையகம்" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 #: standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "விற்பவர்" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" "தானாக தேடிய முறை வெற்றிபெறவில்ைல.தயவுசெய்து சரியான திரையகத்ைத.தேர்ந்ெதடுக்கவும்" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "இங்கு நீங்கள் செய்யும் மாற்றங்கள் உங்கள் திரையகத்ைத முற்றிலும் செயலிழக்கச் செய்து விடலாம். \n" "உங்களுக்கு வன்ெபாருள் பற்றி தெரிந்து இருந்தால் மட்டுமே இங்குள்ளதை \n" "மாற்றுங்கள். \n" "\n" "திரையகத்தின் ஒத்தியக்க அளவுகளை சிந்தித்து தேர்வுச் செய்யுங்கள்\n" "\n" "எப்ேபாதும் சிறிய வீச்சுகளையே தேர்வுச் செய்யுங்கள் \n" "தவறான ஒத்தியக்க அளவுகளை தேர்வுச் செய்தால் திரையகம் முற்றிலும் செயலிழந்து போகலாம்" #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "கிடையான புதுக்கல் வீதம்" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "செங்குத்தான புதுக்கல் வீதம்" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "256 வண்ணங்கள் (8 பிட்டுகள்)" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32000 வண்ணங்கள் (15 பிட்டுகள்)" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65000 வண்ணங்கள் (16 பிட்டுகள்)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "16 மில்லியன் வண்ணங்கள் (24 பிட்டுகள்)" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "பரிமாணங்கள்" #: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1586 standalone/drakperm:250 #, c-format msgid "Other" msgstr "மற்றவை" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Choose the resolution and the color depth" msgstr "உங்களுக்கு விருப்பமான பரிமாணங்களையும், ஆழங்களையும் தேர்ந்ெதடுங்கள்" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Graphics card: %s" msgstr "காட்சியமைப்பு அட்ைட: %s" #: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436 #: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321 #: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143 #: standalone/drakTermServ:195 standalone/drakTermServ:515 #: standalone/drakbackup:1350 standalone/drakbackup:3975 #: standalone/drakbackup:4035 standalone/drakbackup:4079 #: standalone/drakconnect:158 standalone/drakconnect:852 #: standalone/drakconnect:939 standalone/drakconnect:1030 #: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173 #: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490 #: ugtk2.pm:899 ugtk2.pm:922 #, c-format msgid "Ok" msgstr "சரி" #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89 #: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429 #: install_steps_interactive.pm:834 interactive.pm:120 interactive.pm:437 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/stdio.pm:39 interactive/stdio.pm:142 #: printer/printerdrake.pm:3971 standalone/drakautoinst:215 #: standalone/drakbackup:1350 standalone/drakbackup:3901 #: standalone/drakbackup:3905 standalone/drakbackup:3963 #: standalone/drakconnect:157 standalone/drakconnect:937 #: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663 #: standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219 #: standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386 #: ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899 #, c-format msgid "Cancel" msgstr "தவிர்" #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150 #: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567 #: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284 #: standalone/drakbackup:3897 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 #: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133 #: standalone/draksambashare:314 standalone/draksec:342 standalone/draksec:344 #: standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "உதவி" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "வடிவமைப்பு சோதித்து பார்க்கப்படுகிறது" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "உங்கள் வடிவமைப்ைப சோதித்து பார்க்க வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "எச்சரிக்ைக; காட்சியமைப்பு அட்ைடயை சோதிப்பது உங்கள் கணினியை முடமாக்கலாம்" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "பிழை ேநர்ந்துள்ளது:\n" "%s\n" "சில அளபுருக்களை மாற்றி பாருங்கள்" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "%d விநாடிகளில் ெவளிேயறுகிறது" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "இந்த அைமப்பு சரியா?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "விசைப்பலகையின் இட அமைவு %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "எலியின் வகை: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "எலியின் வகை: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "திரையகம்: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "திரையகத்தின் கிடையான ஒத்தியக்கம் %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "திரையகத்தின் செங்குத்து ஒத்தியக்கம் %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "காட்சியமைப்பு அட்ைட %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "காட்சியமைப்பு அட்ைடயின் நினைவக அளவு: %s kB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "வண்ணங்களின் ஆழம்: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "பரிமாணம்: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "X பரிமாறியின் இயக்கு நிரல் %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "துவங்கும் போது வரைவியல்வழியில் துவங்குக" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "என்னால் உங்கள் கணினியை துவங்கும் போது வரைவியல்வழியில் துவக்க முடியும்.\n" "ஒவ்வொரு முறை கணினி துவங்கும்போதும் X துவங்கட்டுமா?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "உங்கள் காட்சியமைப்பு அட்ைடயில் டிவிக்கான இடைமுகம் உள்ளது.\n" "தொலைப்புழங்கி மூலம் இதனை வடிவமைக்கலாம்.\n" ".\n" "இது சரியாக வேலைச் செய்ய நீங்கள் கணினி துவங்குமுன்பே உங்கள் டிவியுடன் இனைத்திருக்க " "வேண்டும்\n" "துவங்குநிரலில் டிவி-வழி என்பதை தேர்வுச் செய்தால் டிவியில் பார்க்கலாம்\n" "\n" "நீங்கள் இதனை பயன் படுத்தப் போகிறீர்களா?" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "உங்கள் டிவி எந்த செந்தர வரையேட்டின் கீழ் வருகிறது?" #: Xconfig/xfree.pm:648 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356 #: standalone/service_harddrake:206 #, c-format msgid "Please wait" msgstr "தயவுசெய்து காத்திருக்கவும்.." #: any.pm:142 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "துவங்குநிரல் நிறுவல்" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "துவங்குநிரலை நிறுவப்படுவதில் பிழை நேர்ந்துள்ளது" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள் You may need to change your Open " "Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "நீங்கள் துவங்குநிரலை ஓர் வகிரில் நிறுவுகிறீர்கள்\n" "உங்கள் வன்வட்டின் துவக்கத்தில் ஓர் துவங்குநிரல் இருப்பது இதற்கு பொதுவான காரனம்.\n" "\n" "நீங்கள் எந்த வன்வட்டில் இருந்து துவங்க விரும்புகிறீர்கள்?" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "வன்தட்டின் முதல் வில்ைல " #: any.pm:232 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "துவங்குவகிர்தலின் முதல் வில்ைல" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "நெகிழ்வட்டில்" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4357 #, c-format msgid "Skip" msgstr "தவிர்" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "லிலோ/கிரப் நிறுவல்" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "உங்கள் துவங்குநிரலை எங்கு நிறுவ விரும்புகிறீர்கள்?" #: any.pm:267 standalone/drakboot:269 #, c-format msgid "Boot Style Configuration" msgstr "தொடங்கல் பாந்த வடிவமைப்பு" #: any.pm:269 any.pm:270 any.pm:303 any.pm:304 #, c-format msgid "Bootloader main options" msgstr "துவங்குநிரலின் முக்கிய விருப்பத்ேதர்வுகள்" #: any.pm:275 #, c-format msgid "Give the ram size in MB" msgstr "சரியான நினைவகத்ைத மெகாபைட்டில் தெரிவிக்கவும்" #: any.pm:277 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "விருப்பத்ேதர்வு ``Restrict command line options'' என்பது கடவுச்ெசால் இல்ைலயென்றால் " "பயனற்றது" #: any.pm:278 any.pm:615 authentication.pm:181 #, c-format msgid "The passwords do not match" msgstr "கடவுச்ெசாற்கள் இரண்டும் பொருந்தவில்ைல" #: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326 #, c-format msgid "Please try again" msgstr "மீண்டும் முயற்சித்து பார்க்கவும்" #: any.pm:283 any.pm:308 #, c-format msgid "Bootloader to use" msgstr "பயன்படுத்த வேண்டிய துவங்குநிரல்" #: any.pm:285 any.pm:310 #, c-format msgid "Boot device" msgstr "துவங்கு சாதனம்" #: any.pm:287 #, c-format msgid "Delay before booting default image" msgstr "கொடாநிலை உருவம் துவங்குவதற்கான தாமதம்" #: any.pm:288 #, fuzzy, c-format msgid "Enable ACPI" msgstr "சிடியில் இருந்து தொடங்கலாமா?" #: any.pm:290 #, c-format msgid "Force no APIC" msgstr "" #: any.pm:292 #, c-format msgid "Force No Local APIC" msgstr "" #: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:568 printer/printerdrake.pm:1888 #: printer/printerdrake.pm:2009 standalone/drakbackup:1630 #: standalone/drakbackup:3504 standalone/drakups:299 #, c-format msgid "Password" msgstr "கடவுச்ெசால்" #: any.pm:295 any.pm:651 authentication.pm:187 #, c-format msgid "Password (again)" msgstr "கடவுச்ெசால் (மீண்டும்)" #: any.pm:296 #, c-format msgid "Restrict command line options" msgstr "உரைவழியில் பயன்படுத்தக்கூடிய விருப்பத்ேதர்வுகளைக் கட்டுபடுத்து" #: any.pm:296 #, c-format msgid "restrict" msgstr "கட்டுபடுத்து" #: any.pm:298 #, c-format msgid "Clean /tmp at each boot" msgstr "/tmp அடைவை ஒவ்வொரு முறைத் துவங்கும்போதும் துடைத்து விடு" #: any.pm:299 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "சரியான நினைவகத்ைத தெரிவிக்கவும்(கண்டுள்ள அளவு %d MB)" #: any.pm:309 #, c-format msgid "Init Message" msgstr "முதல் செய்தி" #: any.pm:311 #, c-format msgid "Open Firmware Delay" msgstr "ஒபன்பர்ம்வேர் தாமதம்" #: any.pm:312 #, c-format msgid "Kernel Boot Timeout" msgstr "கரு தொடங்கல் வெளியேற்ற நேரம்" #: any.pm:313 #, c-format msgid "Enable CD Boot?" msgstr "சிடியில் இருந்து தொடங்கலாமா?" #: any.pm:314 #, c-format msgid "Enable OF Boot?" msgstr "ஒபன்பர்ம்வேர்-ல் இருந்து தொடங்கலாமா?" #: any.pm:315 #, c-format msgid "Default OS?" msgstr "கொடாநிலை இயங்கு தளம்?" #: any.pm:369 #, c-format msgid "Image" msgstr "உருவம்" #: any.pm:370 any.pm:380 #, c-format msgid "Root" msgstr "மூலம்" #: any.pm:371 any.pm:393 #, c-format msgid "Append" msgstr "பின் சேர்" #: any.pm:373 standalone/drakboot:271 standalone/drakboot:275 #, c-format msgid "Video mode" msgstr "ஒளித்ேதாற்ற முறைமை" #: any.pm:375 #, c-format msgid "Initrd" msgstr "தொடங்கலுருவம்" #: any.pm:376 #, fuzzy, c-format msgid "Network profile" msgstr "வலையமைப்பு பினாமி" #: any.pm:385 any.pm:390 any.pm:392 #, c-format msgid "Label" msgstr "தலைப்பு" #: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52 #, c-format msgid "Default" msgstr "கொடாநிலை" #: any.pm:394 #, c-format msgid "Initrd-size" msgstr "தொடங்கலுருவின் அளவு" #: any.pm:396 #, c-format msgid "NoVideo" msgstr "ஒளித்ேதாற்றம் இல்ைல" #: any.pm:407 #, c-format msgid "Empty label not allowed" msgstr "வெற்றுத் தலைப்புகளுக்கு அனுமதியில்ைல" #: any.pm:408 #, c-format msgid "You must specify a kernel image" msgstr "நீங்கள் நிச்சயம் ஒரு கரு உருவை குறிப்பிட வேண்டும்" #: any.pm:408 #, c-format msgid "You must specify a root partition" msgstr "நீங்கள் நிச்சயம் ஒரு மூல வகிரை குறிப்பிட வேண்டும்" #: any.pm:409 #, c-format msgid "This label is already used" msgstr "இந்த தலைப்பு ஏற்கனவே பயன்பாட்டில் உள்ளது" #: any.pm:423 #, c-format msgid "Which type of entry do you want to add?" msgstr "நீங்கள் எந்த வகையான நுழைவை சேர்க்க போகிறீர்கள்?" #: any.pm:424 #, c-format msgid "Linux" msgstr "லினக்ஸ்" #: any.pm:424 #, c-format msgid "Other OS (SunOS...)" msgstr "மற்ற இயங்கு தளம்(சன்...)" #: any.pm:425 #, c-format msgid "Other OS (MacOS...)" msgstr "மற்ற இயங்கு தளம்(மேக்...)" #: any.pm:425 #, c-format msgid "Other OS (Windows...)" msgstr "மற்ற இயங்கு தளம்(விண்ேடாஸ்...)" #: any.pm:453 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "உங்கள் தொடங்கல்பட்டியில் உள்ள உருப்படிகள் இதோ உள்ளது\n" "இதை நீங்கள் விருப்பம் போல் மாற்றியமைக்கலாம்" #: any.pm:601 #, c-format msgid "access to X programs" msgstr "X நிரல்களுக்கான அனுமதி" #: any.pm:602 #, c-format msgid "access to rpm tools" msgstr "rpmபொதிக் கருவிகளுக்கான அனுமதி" #: any.pm:603 #, c-format msgid "allow \"su\"" msgstr "\"su\" நிர்வாகியாக மாறும் கட்டளையை அனுமதி" #: any.pm:604 #, c-format msgid "access to administrative files" msgstr "நிர்வாக கோப்புகளுக்கு அனுமதி" #: any.pm:605 #, c-format msgid "access to network tools" msgstr "வலையமைப்புக் கருவிகளுக்கு அனுமதி" #: any.pm:606 #, c-format msgid "access to compilation tools" msgstr "உருவாக்கக் கருவிகளுக்கான அனுமதி" #: any.pm:611 #, c-format msgid "(already added %s)" msgstr "(%s ஏற்கனவே சேர்க்கப்பட்டுவிட்டது)" #: any.pm:616 #, c-format msgid "This password is too simple" msgstr "இந்த கடவுச்ெசால் மிக எளிதாக உள்ளது" #: any.pm:617 #, c-format msgid "Please give a user name" msgstr "பயனருக்கு ஓர் பெயர் கொடுக்கவும்" #: any.pm:618 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "பயனர் பெயரில் சிறிய எழுத்துக்கள், எண்கள் `-' `_' மட்டுமே இருக்கலாம்" #: any.pm:619 #, c-format msgid "The user name is too long" msgstr "பயனர் பெயர் மிக நீளமாக உள்ளது" #: any.pm:620 #, c-format msgid "This user name has already been added" msgstr "இந்தப் பயனர் பெயர் ஏற்கனவே சேர்க்கப்பட்டுவிட்டது" #: any.pm:621 any.pm:653 #, c-format msgid "User ID" msgstr "உபயோகிப்பாளர் அடையாளம்" #: any.pm:622 any.pm:654 #, c-format msgid "Group ID" msgstr "குழு ID" #: any.pm:625 #, c-format msgid "%s must be a number" msgstr "" #: any.pm:626 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "" #: any.pm:631 standalone/draksambashare:1210 #, c-format msgid "Add user" msgstr "பயனரைச் சேர்" #: any.pm:633 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "பயனர் பெயரை உள்ளிடவும்\n" "%s" #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:5165 #: standalone/drakbackup:2717 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "முடிந்தது" #: any.pm:637 help.pm:51 #, c-format msgid "Accept user" msgstr "பயனரை ஏற்றுக்ெகாள்" #: any.pm:648 #, c-format msgid "Real name" msgstr "உன்ைமயான பெயர்" #: any.pm:649 standalone/drakbackup:1625 #, fuzzy, c-format msgid "Login name" msgstr "களத்தின் பெயர்" #: any.pm:652 #, c-format msgid "Shell" msgstr "ஓடு" #: any.pm:656 #, c-format msgid "Icon" msgstr "குறும்படம்" #: any.pm:703 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "தன்னியக்கநுழைவு" #: any.pm:704 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "என்னால் உங்கள் கணினியை தன்னியக்கமாக பயனர் பயன்படுத்தும் வகையில் அமைக்க முடியும்" #: any.pm:705 #, fuzzy, c-format msgid "Use this feature" msgstr "நீங்கள் இந்த வசதியை பயன்படுத்த விரும்புகிறீர்களா?" #: any.pm:706 #, c-format msgid "Choose the default user:" msgstr "கொடாநிலை பயனரைத் தேர்வுச் செய்யவும்" #: any.pm:707 #, c-format msgid "Choose the window manager to run:" msgstr "பயன்படுத்த விரும்பும் சாளர மேலாளரைத் தேர்வுச் செய்யவும்" #: any.pm:719 any.pm:787 #, c-format msgid "Please choose a language to use." msgstr "நீங்கள் பயன்படுத்த விரும்பும் மொழியைத் தேர்வுச் செய்யவும்" #: any.pm:720 any.pm:788 #, fuzzy, c-format msgid "Language choice" msgstr "மியான்மர்" #: any.pm:748 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "மாண்ட்ேரக் லினக்ஸில் பல மொழிகளை பயன்படுத்தலாம்\n" "நீங்கள் நிறுவ விரும்பும் மொழியைத் தேர்வுச் செய்க\n" "நீங்கள் நிறுவி முடித்தவுடன் உங்களுக்கு அவை கிடைக்கும்" #: any.pm:751 #, c-format msgid "Multi languages" msgstr "" #: any.pm:767 any.pm:796 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "" #: any.pm:768 help.pm:647 #, fuzzy, c-format msgid "All languages" msgstr "உங்கள் மொழியைத் தேர்வுச் செய்க" #: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:955 #, fuzzy, c-format msgid "Country / Region" msgstr "நாடு" #: any.pm:842 #, fuzzy, c-format msgid "Please choose your country." msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: any.pm:844 #, fuzzy, c-format msgid "Here is the full list of available countries" msgstr "உங்கள் பயன்பாட்டிற்கு உள்ள விசைப்பலகைகள் அனைத்தும் இங்கே கொடுக்கப்பட்டுள்ளன" #: any.pm:845 #, fuzzy, c-format msgid "Other Countries" msgstr "மற்ற துறைகளை" #: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:397 #, c-format msgid "Advanced" msgstr "அலாதியான " #: any.pm:853 #, c-format msgid "Input method:" msgstr "" #: any.pm:856 install_any.pm:417 network/netconnect.pm:306 #: network/netconnect.pm:311 network/netconnect.pm:1206 network/wireless.pm:7 #: printer/printerdrake.pm:105 printer/printerdrake.pm:2430 #, c-format msgid "None" msgstr "வெற்று" #: any.pm:973 #, c-format msgid "No sharing" msgstr "பகிர்தல் கிடையாது" #: any.pm:973 #, c-format msgid "Allow all users" msgstr "அனைத்து பயனரையும் அனுமதி" #: any.pm:977 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "நீங்கள் உங்கள் பயனர்களை தத்தம் அடைவுகளை எளிதாக பகிர்ந்து கொள்ள\n" "விரும்புகிறீர்களா? இதன் மூலம் பயனர்கள் கான்கொரர், நாடிலஸ் ஆகியவற்றில் \"பகிர்\" என்பதைத் " "தேர்வுச் செய்ய முடியும் .\n" "\n" "\"தனிப்பயனாக்கம்\" மூலம் ஒவ்வொரு பயனருக்கும் தனித்தனியாக அனுமதி அளித்தல்.\n" #: any.pm:989 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" #: any.pm:992 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" #: any.pm:1000 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "நீங்கள் சம்பா, NFS மூலம் ஏற்றுமதி செய்யலாம். உங்களுக்கு தேவையானதைத் தேர்வுச் செய்யவும்" #: any.pm:1025 #, c-format msgid "Launch userdrake" msgstr "டிரேக்பயனரை துவக்கு" #: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199 #: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201 #: printer/printerdrake.pm:5483 standalone/drakTermServ:294 #: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85 #: standalone/draknfs:210 standalone/net_monitor:117 #: standalone/printerdrake:583 #, c-format msgid "Close" msgstr "மூடு" #: any.pm:1027 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "நீங்கள் பின்னர் \"fileshare\". \n" "என்ற குழுவிற்கு பயனரை டிரேக்பயனர் மூலம் எளிதாகச் சேர்க்கலாம்" #: authentication.pm:23 #, c-format msgid "Local file" msgstr "வட்டார கோப்பு" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:26 #, fuzzy, c-format msgid "Smart Card" msgstr "வலையமைப்பு அட்ைட" #: authentication.pm:27 authentication.pm:152 #, c-format msgid "Windows Domain" msgstr "விண்ேடாஸ் களம்" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:55 #, fuzzy, c-format msgid "Local file:" msgstr "உள்ளமை கோப்புகள்:" #: authentication.pm:55 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:56 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:56 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:57 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:57 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:58 #, c-format msgid "Windows Domain:" msgstr "விண்ேடாஸ் களம்:" #: authentication.pm:58 #, c-format msgid "" "iWinbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" #: authentication.pm:59 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:59 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "" #: authentication.pm:60 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:60 #, c-format msgid "" "Winbind allows the system to authenticate users in a Windows Active " "Directory Server." msgstr "" #: authentication.pm:85 #, c-format msgid "Authentication LDAP" msgstr "நல்குாிமை LDAP" #: authentication.pm:86 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: authentication.pm:87 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "LDAP சேவையகம்" #: authentication.pm:100 fsedit.pm:23 #, c-format msgid "simple" msgstr "எளிய" #: authentication.pm:101 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:102 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:103 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:110 authentication.pm:148 #, fuzzy, c-format msgid "Authentication Active Directory" msgstr "நல்குாிமை" #: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "வின்களம்" #: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:82 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "சேவையகம்" #: authentication.pm:114 #, fuzzy, c-format msgid "LDAP users database" msgstr "தரவுதளங்கள்" #: authentication.pm:115 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:116 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "" #: authentication.pm:117 #, fuzzy, c-format msgid "Password for user" msgstr "கடவுச்ெசால்" #: authentication.pm:129 #, c-format msgid "Authentication NIS" msgstr "நல்குாிமை NIS" #: authentication.pm:130 #, c-format msgid "NIS Domain" msgstr "NIS களம்" #: authentication.pm:131 #, c-format msgid "NIS Server" msgstr "NIS சேவையகம்" #: authentication.pm:136 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "இதை நீங்கள் பார்த்தால் நீங்கள் மிகப் தவறான \n" "தேர்வு செய்து இருக்கிறீர்கள் என \n" "அர்த்தம். உடனடியாக கணினியில் நல்ல தேர்ச்சியுள்ளவர் \n" "உதவியுடன மாண்ட்ேரக் லினக்ைஸ நிறுவுங்கள். அல்லது ஆரம்பத்தலிருந்து\n" "பொறுமையாக தேர்வுச் செய்து வாருங்கள். வாழ்த்துக்கள்\n" "தயவுசெய்து ஆங்கிலத்தில் நிறுவுங்கள்" #: authentication.pm:148 #, c-format msgid "Authentication Windows Domain" msgstr "நல்குாிமை விண்ேடாஸ் களம்" #: authentication.pm:150 #, c-format msgid "Active Directory Realm " msgstr "" #: authentication.pm:153 #, c-format msgid "Domain Admin User Name" msgstr "விண்ேடாஸ் களத்தின் பயனர் பெயர்" #: authentication.pm:154 #, c-format msgid "Domain Admin Password" msgstr "விண்ேடாஸ் களம் நிர்வாகியின் கடவுச்ெசால்" #: authentication.pm:170 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" #: authentication.pm:171 #, fuzzy, c-format msgid "Set administrator (root) password" msgstr "உங்கள் கடவுச்ெசால்ைல உருவாக்கவும்" #: authentication.pm:172 standalone/drakvpn:1111 #, fuzzy, c-format msgid "Authentication method" msgstr "நல்குாிமை" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:177 help.pm:722 #, c-format msgid "No password" msgstr "கடவுச்ெசால் ஏதுமில்ைல" #: authentication.pm:183 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "உங்கள் கடவுச்ெசால் மிக சிறியதாக உள்ளது (குறைந்த பட்சம் இது %d எழுத்துக்கள் இருக்க " "வேண்டும்) " #: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:569 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "நல்குாிமை" #: authentication.pm:307 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "NIS களத்தில் பரப்ப முடியாது" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:764 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" #: bootloader.pm:904 #, c-format msgid "LILO with graphical menu" msgstr "வரைவியல்வழி லிலோ" #: bootloader.pm:905 #, c-format msgid "LILO with text menu" msgstr "உரைவழி லிலோ" #: bootloader.pm:906 #, c-format msgid "GRUB with graphical menu" msgstr "" #: bootloader.pm:907 #, c-format msgid "GRUB with text menu" msgstr "" #: bootloader.pm:908 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:985 #, c-format msgid "not enough room in /boot" msgstr "/boot அடைவில் போதிய இடமில்ைல" #: bootloader.pm:1475 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "%s இந்த வகிர் உங்கள் துவங்குநிரலை ஏற்றுக் கொள்ளாது\n" #: bootloader.pm:1515 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" #: bootloader.pm:1528 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1529 #, fuzzy, c-format msgid "Re-install Boot Loader" msgstr "துவங்குநிரலை நிறுவுங்கள்" #: common.pm:131 #, c-format msgid "KB" msgstr "கிலோபைட்" #: common.pm:131 #, c-format msgid "MB" msgstr "மெகாபட்" #: common.pm:131 #, c-format msgid "GB" msgstr "கிகாபைட் " #: common.pm:139 #, c-format msgid "TB" msgstr "டெராபைட்" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "%d நிமிடங்கள்" #: common.pm:149 #, c-format msgid "1 minute" msgstr "1 நிமிடம்" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "%d விநாடிகள்" #: common.pm:257 #, c-format msgid "kdesu missing" msgstr "kdesu இல்ைல" #: common.pm:260 #, c-format msgid "consolehelper missing" msgstr "consolehelper இல்ைல" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "ஆஸ்திரியா" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "ஆஸ்திரேலியா" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "பெல்ஜியம்" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "பிரேசில்" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "கனடா" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 #: network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "சுவிட்சர்லாந்து" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "கோஸ்டா ரிகா" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "செக் குடியரசு" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "ெஜர்மனி" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "டென்மார்க்" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "எஸ்தோனியா" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 #: network/adsl_consts.pm:770 network/adsl_consts.pm:781 #: network/adsl_consts.pm:792 network/adsl_consts.pm:801 #: network/adsl_consts.pm:810 network/adsl_consts.pm:819 #: network/adsl_consts.pm:828 network/adsl_consts.pm:837 #: network/adsl_consts.pm:846 network/adsl_consts.pm:855 #: network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "ஸ்ெபயின்" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "பின்லாந்து" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:41 #, c-format msgid "France" msgstr "பிரான்சு" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "கிரிஸ்" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "ஹங்கேரி" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "அயர்லாந்து" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "இஸ்ரேல்" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "இத்தாலி" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "ஜப்பான்" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "நெதர்லாந்து" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "நார்ேவ" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "நியுசிலாந்து" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "ேபாலாந்து" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "ேபார்ச்சுகல்" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "ரஷ்யா" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "சுவிடன்" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "ஸ்ேலாேவகியா" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "தாய்லாந்து" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "தைவான்" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "ெதன் ஆப்ரிகா" #: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "அமெரிக்கா" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "புதிய" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "இறக்கு" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "ஏற்று" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 #: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "ஏற்றப் புள்ளி" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "தயவுெசய்து சேவையகத்தின் URL அடிக்கவும்" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL எப்ேபாதும் http:// அல்லது https:// எனத் தொடங்கவேண்டும்" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "சேவையகம்: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:521 #: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286 #, c-format msgid "Mount point: " msgstr "ஏற்றப் புள்ளி: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293 #, c-format msgid "Options: %s" msgstr "விருப்பத்ேதர்வுகள்: %s" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும்" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "எதொடங்கல் " #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "மாயாவி... " #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "இயக்கத்ைத தேர்வுச் செய் " #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "உங்கள் விண்ேடாஸ் வகிர்\n" "மிகப்ெபரியதாக உள்ளது .\n" "அதை நீங்கள் மாற்றியமைக்க நான் அறிவுருத்துவேன்\n" "(\"மாற்றியமை\" என்பதன் மீது கிளிக் செய்)" #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "தயவுசெய்து வகிர் ஒன்ைற தேர்ந்ெதடுக்கவும்" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457 #: standalone/drakbackup:2952 standalone/drakbackup:3012 #, c-format msgid "Details" msgstr "விவரங்கள்" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "வன்தட்டு ஏதும் காணப்படவில்ைல" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "Ext2 கோப்பமைப்பு" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "தாளிகையான கோப்பமைப்பு" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "இடமாற்று" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "சன் இயங்குதளம்" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "HFS கோப்பமைப்பு" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "விண்ேடாஸ்" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223 #, c-format msgid "Empty" msgstr "ஒன்றுமில்ைல" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "கோப்பமைப்பு வகைகள்:" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "பதிலாக ``%s'' ஐ பயன்படுத்து" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470 #, c-format msgid "Create" msgstr "உருவாக்கு" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "வகை: " #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455 #: standalone/drakperm:123 standalone/printerdrake:248 #, c-format msgid "Delete" msgstr "நீக்கு" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "முதலில் இறக்கு கட்டளையை பயன்படுத்து" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "வேறு வகிர் ஒன்றை தேர்வுச் செய் " #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "வகிர் ஒன்றை தேர்வுச் செய்" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "வெளிச்ெசல்" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "செயல்நீக்கு" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "சாதாரனர் முறைமைக்கு மாறு" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "அறிஞர் முறைமைக்கு மாறு" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "எப்படியும் தொடரவதா?" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "சேமிக்காமல் வெளிச்ெசல்" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "மாற்றங்களை தட்டில் சேமிக்காமல் வெளிச்ெசல்" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr " /etc/fstab மாற்றங்களை தட்டில் சேமிக்க வேண்டுமா" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:340 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "நீங்கள் செய்த மாற்றங்கள் செயல்பட உங்கள் கணினியை மறுதொடக்கம் செய்யவும்" #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "அனைத்ைதயும் மாற்றியமை" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "தானியக்க வகுத்தல்" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:123 #, c-format msgid "More" msgstr "மேலும்" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "வன்தட்ைட பற்றிய தகவல்" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "தொடக்க வகிர் அனைத்தும் பயஙனபாட்டில் உள்ளது" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "இதற்கு மேல் வகிர் எதனையும் சேர்க்க முடியாது" #: diskdrake/interactive.pm:351 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "மேலும் வகிர் எதனையும் சேர்க்க வேண்டுமானால், தொடக்க வகிர் ஒன்றை நீக்கி விட்டு புதிய " "நீட்டிப்பு வகிர் ஒன்றை உருவாக்கவும்" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "மாற்றங்களை தட்டில் சேமிக்கவும்" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்" #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "தட்டின் வகிர் அமைப்புகளை மீட்கவும்" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "தட்டின் வகிர் அமைப்புகளை புதுக்கல் செய்யவும்" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "கழற்று ஊடகங்கள் தானேற்றம்" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "கோப்ேபா தேர்வுச் செய்" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "காப்பில் உள்ள தட்டின் வகிர் அமைப்பின் அளவு வேறாக உள்ளது\n" "தொடர்ந்து` செல்லலாமா?" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "தட்டின் வகிர் அமைப்புகளை மீட்க முயல்கிறேன்" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "விரிவான தகவல்" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760 #, c-format msgid "Resize" msgstr "மாற்றியமை " #: diskdrake/interactive.pm:450 #, c-format msgid "Format" msgstr "வடிவூட்டு" #: diskdrake/interactive.pm:452 #, c-format msgid "Add to RAID" msgstr "RAID உடன் சேர்" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to LVM" msgstr "LVM உடன் சேர்" #: diskdrake/interactive.pm:456 #, c-format msgid "Remove from RAID" msgstr "RAID இருந்து நீக்கு" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from LVM" msgstr "LVM இருந்து நீக்கு" #: diskdrake/interactive.pm:458 #, c-format msgid "Modify RAID" msgstr "RAID மாற்று" #: diskdrake/interactive.pm:459 #, c-format msgid "Use for loopback" msgstr "கண்ணியாக பயன்படு" #: diskdrake/interactive.pm:514 #, c-format msgid "Create a new partition" msgstr "வகிர் ஒன்றை உருவாக்ககு " #: diskdrake/interactive.pm:517 #, c-format msgid "Start sector: " msgstr "ஆரம்ப வில்: " #: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929 #, c-format msgid "Size in MB: " msgstr "மெகாபைட்டில் அளவு: " #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930 #, c-format msgid "Filesystem type: " msgstr "கோப்பமைப்பு வகை: " #: diskdrake/interactive.pm:525 #, c-format msgid "Preference: " msgstr "விருப்பங்கள்: " #: diskdrake/interactive.pm:528 #, fuzzy, c-format msgid "Logical volume name " msgstr "உள்ளமை கோப்புகள்" #: diskdrake/interactive.pm:558 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "வகிர் ஒன்றை உருவாக்க முடியாது\n" "அதிகபட்ச தொடக்க வகிர் ஏற்கனவே உள்ளது.\n" "ஒரு தொடக்க வகிர் ஒன்றை நீக்கி விட்டு நீட்டிப்பு வகிர் ஒன்றை உருவாக்குங்கள்" #: diskdrake/interactive.pm:588 #, c-format msgid "Remove the loopback file?" msgstr "கண்ணியின் கோப்ேபா நீக்கவா?" #: diskdrake/interactive.pm:607 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr " %s, என்ற வகிர் அதன் வகையை மாற்றியவுடன், அதலிருந்த தகவல் அனைத்ைதயும் இழந்துவிடும்" #: diskdrake/interactive.pm:619 #, c-format msgid "Change partition type" msgstr "வகிர் வகையை மாற்று: " #: diskdrake/interactive.pm:620 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "நீங்கள் எந்த கோப்பமைப்ேபா பயன்படுத்த போகிறீர்கள்?" #: diskdrake/interactive.pm:628 #, c-format msgid "Switching from ext2 to ext3" msgstr "ext2 யிலிருந்து ext3 கோப்பமைப்பிற்கு மாறுகிறது" #: diskdrake/interactive.pm:657 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "உங்கள் கண்ணி கோப்பு %s எங்கு ஏற்ற விரும்புகிறீர்கள்?" #: diskdrake/interactive.pm:658 #, c-format msgid "Where do you want to mount device %s?" msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?" #: diskdrake/interactive.pm:663 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "ஏற்கனவே பயனீட்டில் உள்ளதால் ஏற்றப்புள்ளியை பயன்படுத்த முடியாது.\n" "முதலில் கண்ணியின் கோப்ேபா நீக்குங்கள்" #: diskdrake/interactive.pm:688 #, c-format msgid "Where do you want to mount %s?" msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?" #: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "மாற்றியமைக்கப்படுகிறது" #: diskdrake/interactive.pm:712 #, c-format msgid "Computing FAT filesystem bounds" msgstr "FAT கோப்பமைப்பு அளவுகள் அளக்கப்படுகின்றன" #: diskdrake/interactive.pm:748 #, c-format msgid "This partition is not resizeable" msgstr "இந்த வகிர் மாற்றியமைக்கப்பட முடியாதது" #: diskdrake/interactive.pm:753 #, c-format msgid "All data on this partition should be backed-up" msgstr "தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும்" #: diskdrake/interactive.pm:755 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s, மாற்றியமைத்த பிறகு அனைத்ைதயும் அழித்து விடும்" #: diskdrake/interactive.pm:760 #, c-format msgid "Choose the new size" msgstr "புதிய அளவை தேர்வுச் செய்யவும்" #: diskdrake/interactive.pm:761 #, c-format msgid "New size in MB: " msgstr "புதிய அளவை மெகா பைட்டில் : " #: diskdrake/interactive.pm:802 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:843 #, c-format msgid "Choose an existing RAID to add to" msgstr "ஏற்கனவே இருக்கும் RAID உடன் சேர்" #: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862 #, c-format msgid "new" msgstr "புதிய" #: diskdrake/interactive.pm:860 #, c-format msgid "Choose an existing LVM to add to" msgstr "ஏற்கனவே இருக்கும் LVM உடன் சேர்" #: diskdrake/interactive.pm:866 #, c-format msgid "LVM name?" msgstr "LVM பெயர்" #: diskdrake/interactive.pm:894 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" #: diskdrake/interactive.pm:896 #, c-format msgid "Moving physical extents" msgstr "" #: diskdrake/interactive.pm:914 #, c-format msgid "This partition can not be used for loopback" msgstr "இந்த வகிர் கண்ணியாக பயன்ழடுத்த முடியாது" #: diskdrake/interactive.pm:927 #, c-format msgid "Loopback" msgstr "கண்ணி" #: diskdrake/interactive.pm:928 #, c-format msgid "Loopback file name: " msgstr "கண்ணி கோப்பின் பெயர்: " #: diskdrake/interactive.pm:933 #, c-format msgid "Give a file name" msgstr "கோப்பிற்கு பெயர் கொடுக்கவும்" #: diskdrake/interactive.pm:936 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "இந்த ேகாப்பு ஏற்கனவே பயன்பாட்டில் உள்ளது, வேறு பெயர் கொடுக்கவும்" #: diskdrake/interactive.pm:937 #, c-format msgid "File already exists. Use it?" msgstr "இந்த கோப்பு ஏற்கனவே உள்ளது. பயன்பாடுத்தி கொள்ளலாமா?" #: diskdrake/interactive.pm:960 #, c-format msgid "Mount options" msgstr "ஏற்ற விருப்பத்ேதர்வுகள்" #: diskdrake/interactive.pm:967 #, c-format msgid "Various" msgstr "வேறு" #: diskdrake/interactive.pm:1034 #, c-format msgid "device" msgstr "சாதனம்" #: diskdrake/interactive.pm:1035 #, c-format msgid "level" msgstr "நிலை" #: diskdrake/interactive.pm:1036 #, fuzzy, c-format msgid "chunk size in KiB" msgstr "அளவு" #: diskdrake/interactive.pm:1053 #, c-format msgid "Be careful: this operation is dangerous." msgstr "இந்த செயல் அபாயகரமானது. கவனமாக இருக்கவும்" #: diskdrake/interactive.pm:1068 #, c-format msgid "What type of partitioning?" msgstr "எந்த வகை வகிர்?" #: diskdrake/interactive.pm:1106 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "நீங்கள் செய்த மாற்றங்கள் வேலை செய்ய மறு தொடக்கம் தேவை" #: diskdrake/interactive.pm:1115 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s வட்டின் வகிர் அமைப்பு தட்டில் எழுதப்படவுள்ளது" #: diskdrake/interactive.pm:1138 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும் %s வடிவூட்டிய பிறகு " "அனைத்து விவரங்களையும் இழந்து விடுவீர்கள்" #: diskdrake/interactive.pm:1154 #, c-format msgid "Move files to the new partition" msgstr "கோப்புகளை வேறு வகிர் ஒன்றுக்கு மாற்றவும்" #: diskdrake/interactive.pm:1154 standalone/draksambashare:75 #: standalone/draksambashare:138 #, c-format msgid "Hide files" msgstr "கோப்புகளை மறைக்கவும்" #: diskdrake/interactive.pm:1155 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "%s அைடவில் ஏற்கனவே தரவுகள் உள்ளது\n" "(%s)" #: diskdrake/interactive.pm:1166 #, c-format msgid "Moving files to the new partition" msgstr "கோப்புகளை வேறு வகிர் ஒன்றுக்கு மாற்றப்படுகிறது " #: diskdrake/interactive.pm:1170 #, c-format msgid "Copying %s" msgstr "%s நகலெடுக்கபடுகிறது" #: diskdrake/interactive.pm:1174 #, c-format msgid "Removing %s" msgstr "%s நீக்கப்படுகிறது" #: diskdrake/interactive.pm:1188 #, c-format msgid "partition %s is now known as %s" msgstr "%s வகிர் இப்ேபாது %s என வழங்கப்படுகிறது" #: diskdrake/interactive.pm:1189 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271 #, c-format msgid "Device: " msgstr "சாதனம்: " #: diskdrake/interactive.pm:1210 #, fuzzy, c-format msgid "Devfs name: " msgstr "கணினியின்பெயர்: " #: diskdrake/interactive.pm:1211 #, c-format msgid "Volume label: " msgstr "" #: diskdrake/interactive.pm:1212 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr ": %s டாஸ் இயக்கி எண்\n" #: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225 #: diskdrake/interactive.pm:1289 #, c-format msgid "Type: " msgstr "வகை: " #: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "கணினியின்பெயர்: " #: diskdrake/interactive.pm:1227 #, c-format msgid "Start: sector %s\n" msgstr "ஆரம்பவில் %s\n" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s" msgstr "அளவு: %s" #: diskdrake/interactive.pm:1230 #, c-format msgid ", %s sectors" msgstr ", %s வில்" #: diskdrake/interactive.pm:1232 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d முதல் %d வரை உள்ள உருளைகள்\n" #: diskdrake/interactive.pm:1233 #, c-format msgid "Number of logical extents: %d\n" msgstr "" #: diskdrake/interactive.pm:1234 #, c-format msgid "Formatted\n" msgstr "வடிவூட்டப்பட்டது\n" #: diskdrake/interactive.pm:1235 #, c-format msgid "Not formatted\n" msgstr "வடிவூட்டப்பட்டவில்ைல\n" #: diskdrake/interactive.pm:1236 #, c-format msgid "Mounted\n" msgstr "ஏற்றப்பட்டுள்ளது\n" #: diskdrake/interactive.pm:1237 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1242 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "கண்ணி கோப்பு:\n" " %s\n" #: diskdrake/interactive.pm:1243 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "கொடாநிலையாக தொடங்கிய வகிர்\n" ".\n" #: diskdrake/interactive.pm:1245 #, c-format msgid "Level %s\n" msgstr "நிலை %s\n" #: diskdrake/interactive.pm:1246 #, fuzzy, c-format msgid "Chunk size %d KiB\n" msgstr "வெட்டு அளவு%s\n" #: diskdrake/interactive.pm:1247 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-வட்டிகள் %s\n" #: diskdrake/interactive.pm:1249 #, c-format msgid "Loopback file name: %s" msgstr "கண்ணி கோப்பின் பெயர்: %s" #: diskdrake/interactive.pm:1252 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "இந்த வகிர்\n" "முக்கியமானது\n" "இதை ஒன்றும் செய்யாதீர்கள்\n" #: diskdrake/interactive.pm:1255 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "இந்த வகிர் உங்கள்\n" "கணினி இரண்டு இயக்க நிரல்களும் துவங்க\n" "தேவை\n" #: diskdrake/interactive.pm:1272 #, c-format msgid "Read-only" msgstr "படிப்பதற்கு மட்டும்" #: diskdrake/interactive.pm:1273 #, c-format msgid "Size: %s\n" msgstr "அளவு: %s\n" #: diskdrake/interactive.pm:1274 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "கோனங்கள்: %s உருளைகள், %s தலைகள், %s விற்கள்\n" #: diskdrake/interactive.pm:1275 network/thirdparty.pm:329 #, c-format msgid "Info: " msgstr "தகவல்: " #: diskdrake/interactive.pm:1276 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-தட்டுகள்%s\n" #: diskdrake/interactive.pm:1277 #, c-format msgid "Partition table type: %s\n" msgstr "வகிர் அமைப்பின் வகை: %s\n" #: diskdrake/interactive.pm:1278 #, c-format msgid "on channel %d id %d\n" msgstr "%d தடத்தில் %d உள்ளது\n" #: diskdrake/interactive.pm:1321 #, c-format msgid "Filesystem encryption key" msgstr "கோப்பமைப்பு மறைக்குறியீட்டுச் சாவி" #: diskdrake/interactive.pm:1322 #, c-format msgid "Choose your filesystem encryption key" msgstr "உங்கள் கோப்பமைப்புக்கு மறைக்குறியீட்டுச் சாவியை தேர்வுச் செய்" #: diskdrake/interactive.pm:1325 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "இந்த மறைக்குறியீட்டுச் சாவி மிக எளிதாக உள்ளது %d அளவு இருக்கவேண்டும்" #: diskdrake/interactive.pm:1326 #, c-format msgid "The encryption keys do not match" msgstr "மறைக்குறியீட்டுச் சாவிகள் இரண்டும் ஒன்றாக இல்ைல" #: diskdrake/interactive.pm:1329 network/netconnect.pm:1042 #: standalone/drakconnect:419 standalone/drakroam:120 #, c-format msgid "Encryption key" msgstr "மறைக்குறியீட்டுச் சாவி" #: diskdrake/interactive.pm:1330 #, c-format msgid "Encryption key (again)" msgstr "மறைக்குறியீட்டுச் சாவி(மீண்டும்)" #: diskdrake/interactive.pm:1332 standalone/drakvpn:1017 #: standalone/drakvpn:1102 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "நல்குாிமை" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "வகையை மாற்று" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "பயனர்ெபயர் %s தொடங்க முடியவில்ைல(தவறான கடவுச்ெசால்?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "வின்கள நல்குரிமை வேண்டும்" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "எந்த பயனர்ெபயர்" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "மற்ெறான்று" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "தயவுசெய்து உங்கள் பயனர்ெபயர், கடவுச்ெசால், வின்களம் ஆகியவற்ைற தட்டவும்" #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3503 #, c-format msgid "Username" msgstr "பயனர்ெபயர்" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "சேவையகத்ைத தேடு" #: diskdrake/smbnfs_gtk.pm:210 #, fuzzy, c-format msgid "Search new servers" msgstr "சேவையகத்ைத தேடு" #: do_pkgs.pm:16 do_pkgs.pm:49 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். இதை நிறுவ வேண்டுமா?" #: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:4037 #, fuzzy, c-format msgid "Could not install the %s package!" msgstr "%s பொதி நிறுவப்படுகிறது" #: do_pkgs.pm:24 do_pkgs.pm:57 #, c-format msgid "Mandatory package %s is missing" msgstr "கட்டாயமாக இருக்க வேண்டியப் பொதி %s இல்ைல" #: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1311 #: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:460 #: printer/printerdrake.pm:1429 printer/printerdrake.pm:2461 #: printer/printerdrake.pm:2561 printer/printerdrake.pm:2607 #: printer/printerdrake.pm:2674 printer/printerdrake.pm:2709 #: printer/printerdrake.pm:3043 printer/printerdrake.pm:3050 #: printer/printerdrake.pm:4036 printer/printerdrake.pm:4365 #: printer/printerdrake.pm:4485 printer/printerdrake.pm:5644 #: standalone/drakTermServ:326 standalone/drakTermServ:1205 #: standalone/drakTermServ:1266 standalone/drakTermServ:1931 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133 #: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380 #: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:489 #: standalone/localedrake:43 standalone/scannerdrake:51 #: standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "எச்சரிக்ைக" #: do_pkgs.pm:35 standalone/drakbackup:4109 standalone/harddrake2:489 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "கிழ்கானும் பொதிகள் நிறுவுவதற்கு தேர்வுச் செய்யப்பட்டுள்ளது" #: do_pkgs.pm:202 #, c-format msgid "Installing packages..." msgstr "பொதிகளை நிறுவப்படுகிறது..." #: do_pkgs.pm:247 #, fuzzy, c-format msgid "Removing packages..." msgstr "%s நீக்கப்படுகிறது..." #: fs/format.pm:58 fs/format.pm:65 #, c-format msgid "Formatting partition %s" msgstr "%s வகிர் வடிவூட்டப்படுகிறது" #: fs/format.pm:62 #, c-format msgid "Creating and formatting file %s" msgstr "%s என்ற கோப்பு உருவாக்கப்பட்டு வடிவூட்டபடுகின்றன" #: fs/format.pm:115 #, c-format msgid "I do not know how to format %s in type %s" msgstr "%s இந்த %s வகையில் வடிவூட்டுவது எப்படி என எனக்கு தெரியாது" #: fs/format.pm:120 fs/format.pm:122 #, c-format msgid "%s formatting of %s failed" msgstr "%s போல் %s வடிவூட்டியது முடியவில்ைல" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "சுற்று ஏற்றங்கள் %s\n" #: fs/mount.pm:74 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "%s வகிர் வடிவூட்டப்படுகிறது" #: fs/mount.pm:75 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "%s வகிர் %s அடைவில் ஏற்றுவதில் பிழை நேர்ந்துள்ளது" #: fs/mount.pm:80 fs/mount.pm:97 #, c-format msgid "Checking %s" msgstr "%s சரிபார்த்தல்" #: fs/mount.pm:113 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "இறக்குவதில் பிழை நேர்ந்துள்ளது %s: %s" #: fs/mount.pm:142 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "%s வகிர் வடிவூட்டப்படுகிறது" #: fs/mount_options.pm:111 #, fuzzy, c-format msgid "Use an encrypted file system" msgstr "மறைக்குறியீடு செய்யப்பட்ட கோப்பமைப்புக்கு %s ஏற்றப்புள்ளியை பயன்படுத்த முடியாது" #: fs/mount_options.pm:113 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" #: fs/mount_options.pm:115 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs/mount_options.pm:118 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs/mount_options.pm:121 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs/mount_options.pm:123 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs/mount_options.pm:127 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:131 #, c-format msgid "Mount the file system read-only." msgstr "" #: fs/mount_options.pm:133 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:137 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:143 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" #: fs/mount_options.pm:145 #, c-format msgid "Give write access to ordinary users" msgstr "" #: fs/mount_options.pm:147 #, c-format msgid "Give read-only access to ordinary users" msgstr "" #: fs/type.pm:376 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "JFS வகையை 16மெகா பைட்டுக்கு குறைவான வகிற்றில் பயன்படுத்த முடியாது" #: fs/type.pm:377 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS வகையை 32மெகா பைட்டுக்கு குறைவான வகிற்றில் பயன்படுத்த முடியாது" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "/usr உடன்" #: fsedit.pm:32 #, c-format msgid "server" msgstr "பரிமாறி" #: fsedit.pm:210 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "உங்கள் வகிர் அமைப்பு %s குழப்பமாக உள்ளது.\n" "%s என்ற பிழை நேர்ந்துள்ளது\n" "\n" "உங்கள் வன் வட்டில் உள்ள அனைத்து விவரங்களையும் இழக்க சம்மதமா?\n" #: fsedit.pm:378 #, c-format msgid "Mount points must begin with a leading /" msgstr "ஏற்றப் புள்ளிகள் / உடன் மட்டும் தான் தொடங்க வேண்டும்" #: fsedit.pm:379 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: fsedit.pm:380 #, c-format msgid "There is already a partition with mount point %s\n" msgstr " %s என்ற ஏற்றப் புள்ளியுடன் ஏற்கனவே வகிர் ஒன்று உள்ளது\n" #: fsedit.pm:382 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "உங்கள் root (/) வகிர் RAID வகையில் உள்ளது. நீங்கள் லிலோ பயன்படுத்தினால் அது வேலை " "செய்ய. /boot தேவை. அதனால் /boot உருவாக்கவும்" #: fsedit.pm:387 #, c-format msgid "" "You can not use a LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" #: fsedit.pm:389 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" #: fsedit.pm:393 fsedit.pm:395 #, c-format msgid "This directory should remain within the root filesystem" msgstr "இந்த அடைவு மூல கோப்பமைப்பில் இருக்க வேண்டும்" #: fsedit.pm:397 fsedit.pm:399 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "நீங்கள் இதனை ஏற்ற (ext2/ext3, reiserfs, xfs, or jfs) போன்ற கோப்பமைப்பு தேவை\n" #: fsedit.pm:401 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "மறைக்குறியீடு செய்யப்பட்ட கோப்பமைப்புக்கு %s ஏற்றப்புள்ளியை பயன்படுத்த முடியாது" #: fsedit.pm:462 #, c-format msgid "Not enough free space for auto-allocating" msgstr "தன்னியக்கமாக அளிக்க போதிய இடமில்ைல" #: fsedit.pm:464 #, c-format msgid "Nothing to do" msgstr "ஒன்றும் செய்வதற்கில்ைல" #: harddrake/data.pm:62 install_any.pm:1705 #, c-format msgid "Floppy" msgstr "ெநகிழ்வட்டு" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "ஜிப்" #: harddrake/data.pm:88 install_any.pm:1706 #, c-format msgid "Hard Disk" msgstr "வட்டு" #: harddrake/data.pm:97 install_any.pm:1707 #, c-format msgid "CDROM" msgstr "சிடி இயக்கி" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "சிடி/டிவிடி எரிப்பான்கள்" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "டிவிடி-இயக்கி" #: harddrake/data.pm:127 standalone/drakbackup:2050 #, c-format msgid "Tape" msgstr "நாடா" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "ஒளித்ேதற்ற அட்ைட" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "TV அட்ைட" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "மற்ற பல்லூடக சாதனங்கள்" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "ஒலியட்ைட" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "வலைபடக் கருவி" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "ெசயலகங்கள்" #: harddrake/data.pm:209 #, fuzzy, c-format msgid "ISDN adapters" msgstr "ISDN அட்ைட" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "வலையமைப்பு அட்ைட" #: harddrake/data.pm:282 network/netconnect.pm:481 #, c-format msgid "Modem" msgstr "ேமாடம்" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "நினைவு" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "AGP கட்டுபாடுகள்" #: harddrake/data.pm:324 help.pm:186 help.pm:855 #: install_steps_interactive.pm:987 #, c-format msgid "Printer" msgstr "அச்சுப்ெபாறி" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "ஜாய்ஸ்டிக்" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "SATA கட்டுபாடுகள்" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "RAID கட்டுபாடுகள்" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA கட்டுபாடுகள்" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "Firewire கட்டுபாடுகள்" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA கட்டுபாடுகள்" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "SCSI கட்டுபாடுகள்" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "USB கட்டுபாடுகள்" #: harddrake/data.pm:420 #, fuzzy, c-format msgid "USB ports" msgstr "USB அச்சுப்ெபாறி" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "SMBus கட்டுபாடுகள்" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "பிரிட்ஜ் மற்றும் இயக்க கட்டுபாடுகள்" #: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119 #: install_steps_interactive.pm:947 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "விசைப்பலகை" #: harddrake/data.pm:460 #, c-format msgid "Tablet and touchscreen" msgstr "" #: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:980 #, c-format msgid "Mouse" msgstr "எலி" #: harddrake/data.pm:483 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:492 #, c-format msgid "Scanner" msgstr "வருடி" #: harddrake/data.pm:502 standalone/harddrake2:454 #, c-format msgid "Unknown/Others" msgstr "ெதரியாத/மற்றவை" #: harddrake/data.pm:530 #, c-format msgid "cpu # " msgstr "ெசயலகம் # " #: harddrake/sound.pm:192 standalone/drakconnect:162 #: standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "தயவுசெய்து காத்திருக்கவும்...செயல்படுத்தப்படுகிறது" #: harddrake/sound.pm:228 #, c-format msgid "No alternative driver" msgstr "மாற்று இயக்கநிரல் ஏதுமில்ைல" #: harddrake/sound.pm:229 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "உங்கள் (%s) ஒலியட்ைடக்கு OSS/ALSA இயக்க நிரல் ஏதுமில்ைல. அதனால் \"%s\" பயன்படுகிறது" #: harddrake/sound.pm:235 #, c-format msgid "Sound configuration" msgstr "ஒலி வடிவமைப்பு" #: harddrake/sound.pm:237 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "உங்கள் ஒலியட்ைடக்கு (%s) மாற்று இயக்கநிரலை இங்கு தேர்வு செய்யலாம்" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:242 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: harddrake/sound.pm:244 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "இயக்கநிரல்:" #: harddrake/sound.pm:263 #, c-format msgid "Trouble shooting" msgstr "சரிபார்க்க படுகிறது" #: harddrake/sound.pm:271 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:279 #, c-format msgid "No open source driver" msgstr "விடுவிக்கப்பட்ட இயக்கநிரல் ஏதுமில்ைல" #: harddrake/sound.pm:280 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "உங்கள் ஒலியட்ைடக்கு (%s), விடுவிக்கப்பட்ட இயக்கநிரல் ஏதுமில்ைலமாற்று இயக்கநிரல் \"%s\" " "உள்ளது" #: harddrake/sound.pm:283 #, c-format msgid "No known driver" msgstr "இயக்கநிரல் ஏதுமில்ைல" #: harddrake/sound.pm:284 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "உங்கள் ஒலியட்ைடக்கு (%s) இயக்கநிரல் ஏதுமில்ைல" #: harddrake/sound.pm:288 #, c-format msgid "Unknown driver" msgstr "தெரியாத இயக்க நிரல்" #: harddrake/sound.pm:289 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "உங்கள் ஒலியட்ைடக்கான இயக்கநிரல் \"%s\" ஏதுமில்ைல" #: harddrake/sound.pm:303 #, c-format msgid "Sound trouble shooting" msgstr "ஒலியை சரிபார்த்தல்" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:306 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:332 #, c-format msgid "Let me pick any driver" msgstr "நாேன இயக்கு நிரலை ேதர்ந்ெதடுக்கிேறன்" #: harddrake/sound.pm:335 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:338 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65 #: standalone/net_applet:67 #, c-format msgid "Auto-detect" msgstr "தன்னியக்க-கண்டுபிடித்தல்" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "பொதுவின திரையகம்" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Unknown|CPH05X (bt878) [many vendors]" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Unknown|CPH06X (bt878) [many vendors]" #: harddrake/v4l.pm:404 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." #: harddrake/v4l.pm:407 #, c-format msgid "Card model:" msgstr "அட்ைட மாதிரி:" #: harddrake/v4l.pm:408 #, c-format msgid "Tuner type:" msgstr "Tuner type:" #: harddrake/v4l.pm:409 #, c-format msgid "Number of capture buffers:" msgstr "Number of capture buffers:" #: harddrake/v4l.pm:409 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "number of capture buffers for mmap'ed capture" #: harddrake/v4l.pm:411 #, c-format msgid "PLL setting:" msgstr "PLL அமைப்புக்கள்" #: harddrake/v4l.pm:412 #, c-format msgid "Radio support:" msgstr "வாெனாலி ஆதரவு" #: harddrake/v4l.pm:412 #, c-format msgid "enable radio support" msgstr "வாெனாலி ஆதரவை ெசயலபடுத்து" #: help.pm:11 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Before continuing, you should read carefully " "the terms of the license. It\n" "covers the whole Mandriva Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:738 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "ஒப்புக் கொள்கிறேன்" #: help.pm:17 #, fuzzy, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.GNU/Linux is a multiuser system, and this " "means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." #: help.pm:51 printer/printerdrake.pm:1887 printer/printerdrake.pm:2008 #: standalone/draksambashare:54 #, c-format msgid "User name" msgstr "பயனர் பெயர்" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 #: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321 #: network/thirdparty.pm:383 printer/printerdrake.pm:3973 #: standalone/drakTermServ:384 standalone/drakbackup:3954 #: standalone/drakbackup:4048 standalone/drakbackup:4065 #: standalone/drakbackup:4083 ugtk2.pm:490 #, c-format msgid "Next" msgstr "அடுத்து" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "நீங்கள் இந்த வசதியை பயன்படுத்த விரும்புகிறீர்களா?" #: help.pm:54 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Listed above are the existing Linux partitions " "detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." #: help.pm:85 #, fuzzy, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.The Mandriva Linux installation is spread out " "over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required" #: help.pm:92 #, fuzzy, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make " "it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.It is now time to specify which programs you " "wish to install on your\n" "system. There are thousands of packages available for Mandriva Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "வேலைக்களம்" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 #: share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "உருவாக்கம்" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "வரைவியல்வழி சூழல்கள்" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646 #, c-format msgid "Individual package selection" msgstr "தனித்னி பொதியாக தேர்வுச் செய்" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "ேமம்படுத்துதல்" #: help.pm:146 install_steps_interactive.pm:604 #, c-format msgid "With X" msgstr "X உடன் வரைவியல்வழியிடல பயன்படுத்த இது தேவை" #: help.pm:146 #, fuzzy, c-format msgid "With basic documentation" msgstr "உதவி நூல்களுடன் (குறைந்தபட்சம் இது தேவை!)" #: help.pm:146 #, fuzzy, c-format msgid "Truly minimal install" msgstr "குறைந்தபட்ச நிறுவல்" #: help.pm:149 #, fuzzy, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Finally, depending on whether or not you " "selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandriva Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:939 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2517 #: standalone/draksec:54 standalone/harddrake2:312 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "No" msgstr "இல்ைல" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:939 interactive.pm:161 #: modules/interactive.pm:71 printer/printerdrake.pm:883 #: printer/printerdrake.pm:898 standalone/drakbackup:2517 #: standalone/draksec:55 standalone/harddrake2:311 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "Yes" msgstr "ஆம்" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #: standalone/drakbackup:2349 standalone/drakbackup:2353 #: standalone/drakroam:227 #, c-format msgid "Configure" msgstr "வடிவமை" #: help.pm:189 #, fuzzy, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.You may now choose which services you wish to " "start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" #: help.pm:206 #, fuzzy, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.GNU/Linux manages time in GMT (Greenwich Mean " "Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." #: help.pm:217 install_steps_interactive.pm:882 #, c-format msgid "Hardware clock set to GMT" msgstr "வன்ெபாருள் கடிகாரத்ைத GMT க்கு மாற்று" #: help.pm:217 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "தானியங்கி நேர ஒத்தியக்கி(NTP உதவியுடன்)" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" #: help.pm:308 #, fuzzy, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.Finally, you will be asked whether you want to " "see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, " "choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "காலியாக உள்ள இடத்ைத பயன்படுத்து" #: help.pm:374 #, fuzzy, c-format msgid "Use existing partition" msgstr "இருக்கும் வகிர்களை பயன்படுத்துங்கள்" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "விண்ேடாஸ் வகிற்றில் உள்ள காலியிடத்ைத பயன்படுத்து" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "முழு வட்ைடயும் அழித்து விடு" #: help.pm:374 #, fuzzy, c-format msgid "Remove Windows" msgstr "விண்ேடாைஸ நீக்கி விடு" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "வகிர்தலை தனிப்பயனாக்கு" #: help.pm:377 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.There you are. Installation is now complete " "and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"%s\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" #: help.pm:409 #, fuzzy, c-format msgid "Generate auto-install floppy" msgstr "தானியங்கி நிறுவல்வட்ைட உருவாக்கவும்" #: help.pm:409 install_steps_interactive.pm:1337 #, c-format msgid "Replay" msgstr "மறு இயக்கம்" #: help.pm:409 install_steps_interactive.pm:1337 #, c-format msgid "Automated" msgstr "தானியங்கி" #: help.pm:409 install_steps_interactive.pm:1340 #, c-format msgid "Save packages selection" msgstr "பொதித் தேர்ைவச் சேமி" #: help.pm:412 #, fuzzy, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Any partitions that have been newly defined " "must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437 #: interactive/newt.pm:318 printer/printerdrake.pm:3971 #: standalone/drakTermServ:363 standalone/drakbackup:3914 #: standalone/drakbackup:3953 standalone/drakbackup:4064 #: standalone/drakbackup:4079 ugtk2.pm:488 #, c-format msgid "Previous" msgstr "முன்னது" #: help.pm:434 #, fuzzy, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "உங்கள் மான்டிரேக் லினக்ஸ் இயக்க நிரல் வெளியீட்டிற்கும் \n" "இன்றைய தினத்திற்கும் இடையில் நிறைய புதிய பொதிகள் வெளிவந்து\n" "இருக்கலாம். இவை உங்கள் கணிணியில் நிறுவப்பட்டுள்ள பொதிகளின்\n" "பாதுகாப்பு குறைபாடுகளையும், பிழைகளையும் நீக்க இவை தேவைப்படலாம்\n" "இவை இணையத்தில் தரவு இறக்கம் செய்ய வேண்டும். இப்போது இணையத்துடன் \n" "இணைப்பு இருந்தால் நீங்கள் இவற்றை இறக்கி நிறுவலாம். நீங்கள் தொலைபேசி\n" "முலம் இணைந்திருந்தால் இதற்கு நீண்ட நேரம் ஆகலாம்\n" "பொதிகளை நிறுவ \"ஆம்\" எனவும், நிறுவ விருப்பம் இல்லையென்றால் \"இல்லை\" \n" "எனவும் தேர்வு செய்யவும்.\n" "\n" "பொதிகளை நிறுவ \"ஆம்\" என தேர்வு செய்தால் உங்களுக்கு பல இணையதளங்களின்\n" "முகவரி காட்டப்படும். உங்களுக்கு அருகில் உள்ள தளத்திலிருந்து இறக்க அதனை\n" "தேர்வு செய்யவும். பின் \"நிறுவு\" என்றால் பொதிகள் நிறுவப்படும். இல்லையென்றால்\n" "\"நீக்கு\" எனச் சொல்லி வெளியேறவும்" #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 #: install_steps_interactive.pm:157 standalone/drakbackup:4111 #, c-format msgid "Install" msgstr "நிறுவு" #: help.pm:447 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, it is time to choose the " "security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option" #: help.pm:458 #, fuzzy, c-format msgid "Security Administrator" msgstr "பாதுகாப்பு மேலாளர்(பெயர் அல்லது மின்னஞ்சல் முகவரி)" #: help.pm:461 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, you need to choose which " "partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy.\n" "Useful for later partition-table recovery if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you\n" "can try to recover it using this option. Please be careful and remember\n" "that it can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your\n" "initial partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." #: help.pm:530 #, fuzzy, c-format msgid "Removable media auto-mounting" msgstr "கழற்று ஊடகங்கள் தானேற்றம்" #: help.pm:530 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "சாதாரனர் முறைமைக்கு மாறு" #: help.pm:533 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.More than one Microsoft partition has been " "detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current " "partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, fuzzy, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you will not even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.உதவி இன்னமும் மொழிபெயர்கப்படவில்லை." #: help.pm:609 #, fuzzy, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 " "will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"%s\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.உதவி இன்னமும் " "மொழிபெயர்கப்படவில்லை. " #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.உதவி இன்னமும் மொழிபெயர்கப்படவில்லை." #: help.pm:681 #, fuzzy, c-format msgid "with Wheel emulation" msgstr "பொத்தான் போன்மி" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.Please select the correct port. For example, " "the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux.. " #: help.pm:688 #, fuzzy, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. This is the most crucial decision point for " "the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." #: help.pm:722 #, fuzzy, c-format msgid "authentication" msgstr "நல்குாிமை" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:117 printer/data.pm:129 #, c-format msgid "CUPS" msgstr "கப்ஸ்" #: help.pm:765 #, c-format msgid "Expert" msgstr "நிபுணர்" #: help.pm:768 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. DrakX now detects any IDE device present in " "your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from Microsoft Windows (if you used this hardware with\n" "Windows on your system)." #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" #: help.pm:788 help.pm:855 install_steps_interactive.pm:1014 #: install_steps_interactive.pm:1031 #, c-format msgid "Sound card" msgstr "ஒலியட்ைட" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to " "benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:878 #: install_steps_interactive.pm:973 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "கால மண்டலம்" #: help.pm:855 install_steps_interactive.pm:1047 #, c-format msgid "TV card" msgstr "TV அட்ைட" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN அட்ைட" #: help.pm:855 #, fuzzy, c-format msgid "Graphical Interface" msgstr "வரைவியல்வழி" #: help.pm:855 install_any.pm:1728 install_steps_interactive.pm:1065 #: standalone/drakbackup:2035 #, c-format msgid "Network" msgstr "வலையமைப்பு" #: help.pm:855 install_steps_interactive.pm:1077 #, fuzzy, c-format msgid "Proxies" msgstr "பயனர்குறிப்பு: " #: help.pm:855 install_steps_interactive.pm:1088 #, c-format msgid "Security Level" msgstr "பாதுகாப்பு நிலை" #: help.pm:855 install_steps_interactive.pm:1102 network/drakfirewall.pm:189 #, c-format msgid "Firewall" msgstr "நெருப்புச்சுவர்" #: help.pm:855 install_steps_interactive.pm:1118 #, c-format msgid "Bootloader" msgstr "துவங்குநிரல்" #: help.pm:855 install_steps_interactive.pm:1131 services.pm:114 #: services.pm:157 services.pm:193 #, c-format msgid "Services" msgstr "சேவைகள்" #: help.pm:858 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "உங்கள் கணினியில் மாண்ட்ேரக் லினக்ஸ் இயக்க அமைப்ேபா மட்டும்\n" "இயக்க முடிவெடுத்தால் இவ்வுகப்பத்ைதத் தேர்ந்ெதடுக்கவும். இதனால்\n" "உங்களின் வன்வட்டு முழுவதுமுள்ள தரவுகள், வகிர்வுகள் எல்லாம்\n" "அழிந்துவிடும். அவைகளைத் திரும்பிப் பெற இயலாது. ஆகவே,\n" "எச்சரிக்ைகயாகச் செயல்பட வேண்டும்." #: help.pm:863 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Click on \"OK\" if you want to delete all " "data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." #: help.pm:869 #, c-format msgid "Next ->" msgstr "அடுத்து ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- முன்னது" #: install2.pm:115 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "உங்கள் கருவிற்கு இணையான கூறுகளை காணமுடியவில்ைல (%s கோப்ேபா கானவில்ைல), இதற்கு அர்த்தம் " "நீங்கள் தவறான நிறுவுதட்ைட பயன்படுத்துகிறீர்கள் (தயவுசெய்து புதிய நிறுவுதட்ைட " "உருவாக்குங்கள்)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "நீங்கள் %s இதனையும் வடிவுட்ட வேண்டும்" #: install_any.pm:401 #, fuzzy, c-format msgid "Do you have further supplementary media?" msgstr "மேலும் உள்ளனவா?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:404 #, fuzzy, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "நீங்கள் %s இடைமுக அட்ைடகள் ஏதேனும் பயன்படுத்துகிறிர்களா?" #: install_any.pm:417 printer/printerdrake.pm:3301 #: printer/printerdrake.pm:3308 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "சிடி இயக்கி" #: install_any.pm:417 #, fuzzy, c-format msgid "Network (HTTP)" msgstr "வலையமைப்பு %s" #: install_any.pm:417 #, fuzzy, c-format msgid "Network (FTP)" msgstr "வலையமைப்பு %s" #: install_any.pm:417 #, c-format msgid "Network (NFS)" msgstr "" #: install_any.pm:447 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:473 network/netconnect.pm:835 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "சாதனம் எதுவும் கிடைக்கவில்லை" #: install_any.pm:478 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:483 #, c-format msgid "Unable to mount CD-ROM" msgstr "" #: install_any.pm:516 install_any.pm:537 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:521 #, c-format msgid "NFS setup" msgstr "" #: install_any.pm:521 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "" #: install_any.pm:522 #, c-format msgid "Hostname of the NFS mount ?" msgstr "" #: install_any.pm:522 standalone/draknfs:288 #, c-format msgid "Directory" msgstr "அடைவு" #: install_any.pm:575 #, fuzzy, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "இதை திறக்க முடியவில்ைல%s: %s\n" #: install_any.pm:652 #, c-format msgid "Removing packages prior to upgrade..." msgstr "" #: install_any.pm:694 #, c-format msgid "Looking at packages already installed..." msgstr "ஏற்கனவே நிறுவப்பட்டுள்ள பொதிகள் பார்ைவயிடப்படுகின்றன" #: install_any.pm:698 #, c-format msgid "Finding packages to upgrade..." msgstr "மேம்படுத்தப்பட வேண்டிய பொதிகள் அறியப்படுகின்றன" #: install_any.pm:776 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "சிடியை மாற்றவும்\n" "\n" "தயவுசெய்து \"%s\" என பெயரிடப்பட்ட நிறுவல் சிடியை சிடிராமில் வைக்கவும். வைத்தவுடன் சரி " "என்ற பொத்தானை கிளிக் செய்யவும்" #: install_any.pm:788 #, fuzzy, c-format msgid "Copying in progress" msgstr "இன்னும் தேடுதல் நடைபெறுகிறது" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:930 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "நீங்கள் கீழ்கானும் ேசவையகங்களை ேதர்வு செய்து உள்ளீர்கள்: %s\n" "\n" "\n" "இந்த ேசவையகங்கள் கொடாநிலையாக துவக்கப்படும். இவற்றில் இவை: \n" "வெளியிடப் பட்டபோது பாதுகாப்பு பிரச்சினை ஏதுமில்ைல. ஆனால் பின்னாளில்:\n" "கண்டுபிடிக்கப்படலாம்.\n" "அப்ேபாது அவற்றுக்கான மாற்றுப் பொதிகளை நிறுவவும்\n" "\n" "\n" "நிங்கள் நிச்சயம் இவற்ைற நிறுவ விரும்புகிறீர்களா?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:953 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: install_any.pm:1389 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "%s என்ற கோப்ேபா படிப்பதில் பிழை நேர்ந்துள்ளது" #: install_any.pm:1623 #, fuzzy, c-format msgid "The following disk(s) were renamed:" msgstr "கிழ்கானும் பொதிகள் நிறுவுவதற்கு தேர்வுச் செய்யப்பட்டுள்ளது" #: install_any.pm:1625 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1665 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "பிழை நேர்ந்துள்ளது -உங்கள் வன்ெபாருளைச் சோதிக்கவும்" #: install_any.pm:1709 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1709 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1709 #, c-format msgid "NFS" msgstr "NFS" #: install_any.pm:1732 #, fuzzy, c-format msgid "Please choose a media" msgstr "தயவுசெய்து ேதர்ந்ெதடுக்கவும்" #: install_any.pm:1748 #, fuzzy, c-format msgid "File already exists. Overwrite it?" msgstr "இந்த கோப்பு ஏற்கனவே உள்ளது. பயன்பாடுத்தி கொள்ளலாமா?" #: install_any.pm:1752 #, fuzzy, c-format msgid "Permission denied" msgstr "அனுமதிகள்" #: install_any.pm:1801 #, c-format msgid "Bad NFS name" msgstr "" #: install_any.pm:1822 #, fuzzy, c-format msgid "Bad media %s" msgstr "கெட்ட தகவல்" #: install_any.pm:1872 #, c-format msgid "Can not make screenshots before partitioning" msgstr "வகிர்தல் முடிவதற்கு முன் திரைவேட்டு எடுக்க முடியாது" #: install_any.pm:1879 #, c-format msgid "Screenshots will be available after install in %s" msgstr "நிறுவி முடித்தவுடன் திரைவேட்டுகள் %s என்ற அடைவில் கிடைக்கும்" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "இயக்க நிறுவல்" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "இயக்க வடிவமைப்பு " #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "உங்கள் கணினியில் உள்ள சில வன்ெபாருட்களின் இயக்க நிரலை\n" "நீங்கள் %s இங்கிருந்து எடுக்கலாம்" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "உங்களிடம் நிச்சயம் ஒரு மூல வகிர் இருக்க வேண்டும்" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "உங்களிடம் இடமாற்று வகிர் இல்ைல.\n" "\n" "அப்படியே தொடரலாமா?" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "FAT வடிவூட்டப்பட்ட வகிர் /boot/efi என்ற இடத்தில் ஏற்றப்பட வேண்டும்" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "போதுமான காலியிடம் இல்ைல" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "இருக்கும் வகிர்களை பயன்படுத்துங்கள்" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "பயன்படுத்த வகிர்கள் ஏதுமில்ைல" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "வின்ேடாஸ் வகிற்ைற பயன்படுத்தவும்" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "எந்த வகிற்றில் நீங்கள் வின்ேடாஸ்லினக்ைஸ பயன்படுத்த விரும்புகிறீர்கள்?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "அளவை தேர்வுச் செய்யவும்" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "மெகா பைட்டில் மூல வகிர் அளவு : " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "மெகா பைட்டில் இடமாற்று வகிர் அளவு : " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "கண்ணி ேகாப்ைப பயன்படுத்த FAT வகிர் ஏதுமில்ைல(அல்லது காலியிடம் இல்ைல)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "நீங்கள் எந்த வகிற்றின் அளவை மாற்றியமைக்க போகிறீர்கள்?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "விண்ேடாஸ் வகிற்றின் அளவு மாற்றியமைக்கப்பதில் , \n" "இந்த பிழை நேர்ந்துள்ளது மன்னிக்கவும் %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "விண்ேடாஸ் வகிற்றில் உள்ள இடம் கண்டுபிடிக்கிறது" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandriva Linux " "installation." msgstr "" "விண்ேடாஸ் வகிர் மிகவும் துண்டாக்கப்பட்டுள்ளது. தயவுசெய்து நீங்கள் கணினியை விண்ேடாஸில் " "தொடங்கி ``defrag'' என்ற கருவியை இயக்கவும். பின்னர் மீண்டும் இங்கு வந்து மாண்ட்ேரக் " "நிறுவலைத் தொடரவும்" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "எச்சரிக்ைக!\n" "\n" "டிரேக்X இப்ேபாது விண்ேடாஸ் வகிற்றின் அளவை மாற்றியமைக்கப் போகிறது:\n" "இது மிகவும் ஆபத்தானது. நீங்கள் நிச்சயம் விண்ேடாஸில் scandisk நிரலை \n" "இயக்கியிருக்க வேண்டும் \n" "மேலும் உங்களுக்கு தேவையான தகவல்களை காப்பு எடுத்துக் கொள்ளவும்\n" "இவையனைத்தும் சரியாக இருந்தால் சரி என தேர்வுச் செய்யவும்" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "விண்ேடாஸ் அளவு எவ்வளவு பெரிதாக இருக்க வேண்டும்" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "வகிற்றில் %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "விண்ேடாஸ் வகிற்றின் அளவு மாற்றியமைக்கப்படுகிறது" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT அளவு மாற்றியமைக்கப்டுவதில் பிழை நேர்ந்துள்ளது: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "அளவை மாற்றுவதற்கு FAT வகிர் ஏதுமில்ைல(காலியிடம் ஏதுமில்ைல" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "விண்ேடாைஸ நீக்கி விடு" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "உங்களிடம் ஒன்றுக்கு மேற்ப்பட்ட வன் வட்டு உள்ளது, எதில் லினக்ைஸ நிறுவ வேண்டும்?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr " %s வட்டில் உள்ள அனைத்து வகிரும் அதில் உள்ள அனைத்து தகவல்களும் அழிக்கப்பட்டுவிடும்" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "fdisk-ஐ பயன்படுத்து" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "இப்ேபாது நீங்கள் இந்த %s வட்ைட வகிர்தல் வேண்டும்.\n" "முடிந்தவுடன் , `w' என்ழதன் மூலம் சேமிப்பதை மறந்து விடாதே" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "நிறுவுவதற்கு வகிற்றில் போதிய இடமில்ைல" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "டிரேக்X மாயாவி உங்களுக்கு இந்த பதில்களை கொடுக்கிறது" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "வகிர்தலில் பிழை நேர்ந்துள்ளது: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "வலையமைப்பாக்கங்கள் ஏற்றப்படுகிறது" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "வலையமைப்பாக்கங்கள் முடக்கப்படுகிறது" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, fuzzy, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" "Introduction\n" "\n" "அனுமதி ஒப்பந்தம் -தைரியமாக ஒப்புக்ெகாள்ளலாம்\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "எச்சரிக்ைக\n" "\n" "பின்வரும் விவரங்களை கவனமாக படிக்கவும். இதில் உங்களுக்கு\n" "உடன்பாடு இல்ைலயென்றால் அடுத்து வரும்\n" "சிடியை நிறுவ கூடாது\n" "\n" "\n" "அடுத்து வரும் சிடியில் சில நிரல்கள் GPL உரிமைப்படி இல்ைல\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:131 #, fuzzy, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "வாழ்த்துக்கள், நிறுவுதல் வெற்றிகரமாக முடிந்தது\n" "நிறுவல்வட்ைடயும், நிறுவல் சிடியையும் வெளியெ எடுத்துவிட்டு மறுதொடக்கம் செய்யவும்.\n" "\n" "\n" "உங்கள் மாண்ட்ேரக் லின பற்றிய கடைசி தகவல்களுக்கு \n" "பிழையறிவிப்ேபா பார்க்கவும் \n" "\n" "\n" "%s\n" "\n" "\n" "தயவுசெய்து உங்கள் கணினியை வடிவமைக்க மாண்ட்ேரக் உதவிநூல்களை \n" "படிக்கவும்" #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "ஏற்றப் புள்ளி %s ஏற்கனவே உள்ளது" #: install_steps.pm:481 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "சில முக்கிய பொதிகள் நிறுவுவதில் பிழை நேர்ந்துள்ளது\n" "உங்கள் சிடி அல்லது சிடி இயக்கி பழுதடைந்து இருக்கலாம்.\n" "உங்கள் சிடியைச் சோதிக்க ஏற்கனவே இயங்குகின்ற கணினியில் \"rpm -qpl media/main/*.rpm என " "கட்டளையிடவும்\"\n" #: install_steps_auto_install.pm:75 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "தற்ேபாது இந்த `%s நிலைக்கு செல்கிறோம்' \n" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "உங்கள் கணினியில் வளங்கள் குறைவாக உள்ளதால்\n" "மாண்ட்ேரக் லினக்ஸ் நிறுவுவதில் பிழை ஏற்படலாம். நீங்கள் உரைவழி நிறுவலாம்,\n" "சிடியில் நிறுவ தொடங்கும் போது `F1' என அழுத்தி விட்டு, `text'. என அடிக்கவும்" #: install_steps_gtk.pm:211 install_steps_interactive.pm:628 #, c-format msgid "Package Group Selection" msgstr "பொதிகள் குழுத் தேர்வு" #: install_steps_gtk.pm:254 install_steps_interactive.pm:571 #, c-format msgid "Total size: %d / %d MB" msgstr "மெகா பைட்டில் மொத்த அளவு %d / %d" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "தவறான பொதி" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "வெளியீடு: " #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "அளவு: " #: install_steps_gtk.pm:302 #, fuzzy, c-format msgid "%d KB\n" msgstr "கிலோ பைட்டில் அளவு %d \n" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "முக்கியத்துவம்: " #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "நீங்கள் இந்த பொதியை தேர்வு/நீக்க முடியாது" #: install_steps_gtk.pm:340 network/thirdparty.pm:329 #, fuzzy, c-format msgid "due to missing %s" msgstr "kdesu இல்ைல" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "" #: install_steps_gtk.pm:348 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "இடமில்ைல என்பதால் நீங்கள் இந்த பொதியைத் தே`ர்வுச் செய்ய முடியாது" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "கிழ்கானும் பொதிகள் நிறுவுவதற்கு தேர்வுச் செய்யப்பட்டுள்ளது" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "கிழ்கானும் பொதிகள் நீக்கப்படுகிறது" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "இது கட்டாய பொதி. இதனை நீக்க முடியாது" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "இந்த பொதியை.நீக்க முடியாது. இது ஏற்கனவே நிறுவப்பட்டள்ளது" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "இந்த பொதி நிறுவப்படவேண்டும்.ஓப்புதல் தரவும்?.\n" "இதை நீக்க வேண்டுமா?" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "இந்த பொதியை.நீக்க முடியாது. இது நிகழ்நிலைப்படுத்த வேண்டிய பொதி" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "தானாக தேர்வுச் செய்யப்பட்டுள்ள பொதிகளைக் காட்டு" #: install_steps_gtk.pm:394 #, fuzzy, c-format msgid "Load/Save selection" msgstr "பொதிகள் தேர்வு" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "பொதிகள் தேர்ைவ நிகழ்நிலைப் படுத்து" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "குறைந்தபட்ச நிறுவல்" #: install_steps_gtk.pm:414 install_steps_interactive.pm:490 #, c-format msgid "Choose the packages you want to install" msgstr "நிறுவ வேண்டிய பொதிகளை தேர்வுச் செய்யுங்கள் " #: install_steps_gtk.pm:431 install_steps_interactive.pm:714 #, c-format msgid "Installing" msgstr "நிறுவப்படுகிறது" #: install_steps_gtk.pm:457 #, fuzzy, c-format msgid "No details" msgstr "விவரங்கள்" #: install_steps_gtk.pm:472 #, c-format msgid "Time remaining " msgstr "தேவைப்படும் நேரம்" #: install_steps_gtk.pm:473 #, c-format msgid "Estimating" msgstr "கணக்கிடப்படுகிறது" #: install_steps_gtk.pm:500 #, c-format msgid "%d packages" msgstr "%d பொதிகள்" #: install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:738 #, c-format msgid "Refuse" msgstr "ஒப்புக்ெகாள்ளவில்ைல" #: install_steps_gtk.pm:543 install_steps_interactive.pm:742 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "சிடியை மாற்றவும்\n" "\n" "தயவுசெய்து \"%s\" என பெயரிடப்பட்ட நிறுவல் சிடியை சிடிராமில் வைக்கவும். வைத்தவுடன் சரி " "என்ற பொத்தானை கிளிக் செய்யவும்\n" "இந்த சிடி இல்ைலயென்றால் நீக்கு என்ற பொத்தானை கிளிக் செய்தால் இந்த சிடியிலிருந்து நிறுவல் " "நின்றுவிடும்" #: install_steps_gtk.pm:556 install_steps_interactive.pm:753 #, c-format msgid "There was an error ordering packages:" msgstr "பொதிகளை அடுக்குவதில் பிழை நேர்ந்துள்ளது" #: install_steps_gtk.pm:558 install_steps_interactive.pm:757 #, c-format msgid "There was an error installing packages:" msgstr "பொதிகளை நிறுவுவதில் பிழை நேர்ந்துள்ளது" #: install_steps_gtk.pm:560 install_steps_interactive.pm:753 #: install_steps_interactive.pm:757 #, c-format msgid "Go on anyway?" msgstr "தொடர்ந்து செல்லலாமா?" #: install_steps_gtk.pm:582 install_steps_interactive.pm:933 steps.pm:30 #, c-format msgid "Summary" msgstr "உரை" #: install_steps_gtk.pm:605 install_steps_interactive.pm:929 #: install_steps_interactive.pm:1078 #, c-format msgid "not configured" msgstr "வடிவமைக்கப்படவில்ைல" #: install_steps_gtk.pm:668 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" #: install_steps_gtk.pm:677 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" #: install_steps_gtk.pm:679 #, c-format msgid "Copy whole CDs" msgstr "" #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "அனுமதி ஒப்பந்தம்" #: install_steps_interactive.pm:89 #, fuzzy, c-format msgid "Release Notes" msgstr "வெளியீடு: " #: install_steps_interactive.pm:120 #, c-format msgid "Please choose your keyboard layout." msgstr "தயவுசெய்து உங்கள் விசைப்பலகை இட அமைவைத் தேர்வு செய்க " #: install_steps_interactive.pm:122 #, fuzzy, c-format msgid "Here is the full list of available keyboards" msgstr "உங்கள் பயன்பாட்டிற்கு உள்ள விசைப்பலகைகள் அனைத்தும் இங்கே கொடுக்கப்பட்டுள்ளன" #: install_steps_interactive.pm:152 #, c-format msgid "Install/Upgrade" msgstr "நிறுவுதுல்/ேமம்படுத்தல்" #: install_steps_interactive.pm:153 #, c-format msgid "Is this an install or an upgrade?" msgstr "இது நிறுவுதலா அல்லது ேமம்படுத்தலா?" #: install_steps_interactive.pm:159 #, c-format msgid "Upgrade %s" msgstr " %s ேமம்படுத்து" #: install_steps_interactive.pm:172 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "மறைக்குறியீட்டுச் சாவி" #: install_steps_interactive.pm:195 #, c-format msgid "Please choose your type of mouse." msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள் " #: install_steps_interactive.pm:196 #, c-format msgid "Mouse choice" msgstr "" #: install_steps_interactive.pm:205 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "எலி இணைக்கப்பட்டுள்ள துறை" #: install_steps_interactive.pm:206 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "தயவுசெய்து, உங்கள் எலி இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறைவயைத் தேர்வுச் செய்யுங்கள்" #: install_steps_interactive.pm:216 #, c-format msgid "Buttons emulation" msgstr "பொத்தான் போன்மி" #: install_steps_interactive.pm:218 #, c-format msgid "Button 2 Emulation" msgstr "2-பொத்தான் போன்மி" #: install_steps_interactive.pm:219 #, c-format msgid "Button 3 Emulation" msgstr "3-பொத்தான் போன்மி" #: install_steps_interactive.pm:240 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:240 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA அட்ைடகள் வடிவமைக்கப்படுகிறது..." #: install_steps_interactive.pm:247 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:247 #, c-format msgid "Configuring IDE" msgstr "IDE வடிவமைக்கப்படுகிறது..." #: install_steps_interactive.pm:267 #, c-format msgid "No partition available" msgstr "வகிர் ஏதுமில்ைல" #: install_steps_interactive.pm:270 #, c-format msgid "Scanning partitions to find mount points" msgstr "ஏற்றப் புள்ளிகளுக்காக வகிர்கள் தேடப்படுகின்றன" #: install_steps_interactive.pm:277 #, c-format msgid "Choose the mount points" msgstr "ஏற்றப் புள்ளிகளை தேர்வுச் செய்" #: install_steps_interactive.pm:323 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "துவங்குநிரலை நிறுவ இடமில்ைல. நிறுவுதல் தொடரும். ஆனால் உங்கள் லினக்ஸ் இயக்க நிரலை துவக்க " "டிரேக்வட்ைட பயன்படுத்துங்கள்" #: install_steps_interactive.pm:328 #, fuzzy, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "துவங்குநிரலை நிறுவ இடமில்ைல. நிறுவுதல் தொடரும். ஆனால் உங்கள் லினக்ஸ் இயக்க நிரலை துவக்க " "டிரேக்வட்ைட பயன்படுத்துங்கள்" #: install_steps_interactive.pm:364 #, c-format msgid "Choose the partitions you want to format" msgstr "எந்த வகிர் வடிவூட்டபட வேண்டுமென தேர்வு சேய்யுங்கள்" #: install_steps_interactive.pm:366 #, c-format msgid "Check bad blocks?" msgstr "கட்டங்களை சோதிக்க வேண்டுமா?" #: install_steps_interactive.pm:394 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "%s என்ற கோப்பமைப்பு சோதிக்கப் படவில்ைல. தவறு ஏதுமிருநதால் அதை சரிசெய்யலாமா? " #: install_steps_interactive.pm:397 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "இடமாற்றுக்கு போதுமான இடமில்ைல, தயவுசெய்து இன்னும் சிறிது சேர்க்கவும்" #: install_steps_interactive.pm:406 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "இருக்கும் பொதிகள் பார்ைவயிடப்பட்டு rpm தரவு மீத்ெதாடக்கப் படுகின்றன" #: install_steps_interactive.pm:407 install_steps_interactive.pm:459 #, c-format msgid "Looking for available packages..." msgstr "இருக்கும் பொதிகள் பார்ைவயிடப்படுகின்றன" #: install_steps_interactive.pm:428 install_steps_interactive.pm:833 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "பொதிகளை எங்கிருந்து இறக்க விரும்புகிறீர்கள்" #: install_steps_interactive.pm:468 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "உங்கள் வட்டில் போதுமான இடமில்ைல (%d > %d)" #: install_steps_interactive.pm:502 #, fuzzy, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "தயவுசெய்து உங்கள் பொதி தேர்ைவ ஒரு நெகிழ்வட்டில் சேமிக்கவும்.\n" "இவ்வாறு சேமிக்கும் முறை தானியங்கி-நிறுவலை ஒத்து இருக்கும்" #: install_steps_interactive.pm:504 #, c-format msgid "Load" msgstr "ஏற்றி" #: install_steps_interactive.pm:504 standalone/drakbackup:3932 #: standalone/drakbackup:4005 standalone/logdrake:175 #, c-format msgid "Save" msgstr "சேமி" #: install_steps_interactive.pm:512 #, fuzzy, c-format msgid "Bad file" msgstr "கோப்பை ஏற்று" #: install_steps_interactive.pm:585 #, c-format msgid "Selected size is larger than available space" msgstr "நீங்கள் தேர்வு செய்துள்ள அளவு, இருக்குமிடத்ைத விட அதிகமாக உள்ளது" #: install_steps_interactive.pm:600 #, c-format msgid "Type of install" msgstr "நிறுவல் முறை" #: install_steps_interactive.pm:601 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "நீங்கள் பொதி குழுக்கள் எதனையும் தேர்வு செய்யவில்ைல.\n" "தயவுசெய்து உங்களுக்கு தேவையானதை தேர்வு செய்யவும்" #: install_steps_interactive.pm:605 #, c-format msgid "With basic documentation (recommended!)" msgstr "உதவி நூல்களுடன் (குறைந்தபட்சம் இது தேவை!)" #: install_steps_interactive.pm:606 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "மிகச்சிறிய நிறுவல்(urpmi கூட கிடையாது)" #: install_steps_interactive.pm:645 standalone/drakxtv:52 #, c-format msgid "All" msgstr "அனைத்து" #: install_steps_interactive.pm:684 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "கிழே உள்ள அனைத்து சிடிக்களும் இருந்தால் சரி என கிளிக் செய்யவும்.\n" "ஒன்று கூட இல்ைலயென்றால் நீக்கு என்பதை கிளிக் செய்யவும்\n" "சில சிடிகள் மட்டும் இல்ைலயென்றால் இல்லாதவற்ைற மட்டும் நீக்கிவிட்டு சரி என கிளிக் செய்யவும்" #: install_steps_interactive.pm:689 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr " \"%s\" என பெயரிடப்பட்ட சிடி" #: install_steps_interactive.pm:714 #, c-format msgid "Preparing installation" msgstr "நிறுவுதல் தொடங்குகிறது" #: install_steps_interactive.pm:722 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "இந்த பொதி நிறுவப்படுகிறது%s\n" "%d%%" #: install_steps_interactive.pm:771 #, c-format msgid "Post-install configuration" msgstr "நிறுவியபின் சேய்ய வேண்டிய வடிவமைப்புகள்" #: install_steps_interactive.pm:778 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:806 #, c-format msgid "Updates" msgstr "புதுப்பித்தல்கள்" #: install_steps_interactive.pm:807 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "இந்த பொதிகள் உங்கள் இயக்க நிரல் வெளியிட்ட பின் வெளிவந்தவை\n" "இவை பொதுவாக பிழைகளை நீக்கவும், பாதுகாப்பு குறைபாடுகளை\n" "நீக்கவும் வெளியிடப்பட்டவை \n" "\n" "இவற்ைற நிறுவ உங்களுக்கு நல்ல இணையத்ெதாடர்பு தேவை\n" "\n" "இவற்ைற நிறுவ விருப்பமா ?" #: install_steps_interactive.pm:828 #, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "தற்ேபாதுள்ள இணைப் பதிப்புதளங்களை அறிய மாண்ட்ேரக் இணையதளம் தொடர்புகொள்ளப்படுகிறது" #: install_steps_interactive.pm:847 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "இணைப் பதிப்புதளங்களில் தற்ேபாதுள்ள பொதிகளை அறிய இணையதளம் தொடர்புகொள்ளப்படுகிறது" #: install_steps_interactive.pm:851 #, c-format msgid "Unable to contact mirror %s" msgstr "" #: install_steps_interactive.pm:851 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "தவறான தேர்வு, மீண்டும் முயற்சித்து பார்க்கவும்\n" #: install_steps_interactive.pm:878 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "நீங்கள் எந்த கால மண்டலத்ைதச் சேர்ந்தவர்?" #: install_steps_interactive.pm:883 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "தானியங்கி நேர ஒத்தியக்கி(NTP உதவியுடன்)" #: install_steps_interactive.pm:891 #, c-format msgid "NTP Server" msgstr "NTP சேவையகம்" #: install_steps_interactive.pm:946 install_steps_interactive.pm:954 #: install_steps_interactive.pm:972 install_steps_interactive.pm:979 #: install_steps_interactive.pm:1130 services.pm:133 #: standalone/drakbackup:1576 #, c-format msgid "System" msgstr "கணினி" #: install_steps_interactive.pm:986 install_steps_interactive.pm:1013 #: install_steps_interactive.pm:1030 install_steps_interactive.pm:1046 #: install_steps_interactive.pm:1057 #, c-format msgid "Hardware" msgstr "வன்பொருள்" #: install_steps_interactive.pm:992 install_steps_interactive.pm:1001 #, c-format msgid "Remote CUPS server" msgstr "தொலை கப்ஸ் சேவையகம்" #: install_steps_interactive.pm:992 #, c-format msgid "No printer" msgstr "அச்சுப்ெபாறி ஏதுமில்ைல" #: install_steps_interactive.pm:1034 #, c-format msgid "Do you have an ISA sound card?" msgstr "உங்களிடம் ISA ஒலியட்ைட ஏதேனும் உள்ளனவா?" #: install_steps_interactive.pm:1036 #, fuzzy, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "\"sndconfig\" என்ற நிரல் மூலம் உங்கள் ஒலியட்ைடயை வடிவமைக்க முடியும்" #: install_steps_interactive.pm:1038 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "ஒலியட்ைட ஏதும் கண்டுபிடிக்க முடியவில்ைல. டிரேக்வன்ெபாருள் மாயாவியை பயன்படுத்துங்கள்" #: install_steps_interactive.pm:1058 #, c-format msgid "Graphical interface" msgstr "வரைவியல்வழி" #: install_steps_interactive.pm:1064 install_steps_interactive.pm:1076 #, c-format msgid "Network & Internet" msgstr "வலையமைப்பும் இணையமும்" #: install_steps_interactive.pm:1078 #, fuzzy, c-format msgid "configured" msgstr "மறுவடிவமை" #: install_steps_interactive.pm:1087 install_steps_interactive.pm:1101 #: security/level.pm:55 steps.pm:20 #, c-format msgid "Security" msgstr "பாதுகாப்பு" #: install_steps_interactive.pm:1106 #, fuzzy, c-format msgid "activated" msgstr "இப்போது துவக்கு" #: install_steps_interactive.pm:1106 #, c-format msgid "disabled" msgstr "முடமாக்கப்பட்டுள்ளது" #: install_steps_interactive.pm:1117 #, c-format msgid "Boot" msgstr "துவக்கம்" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1121 printer/printerdrake.pm:974 #, c-format msgid "%s on %s" msgstr "%s இல் %s" #: install_steps_interactive.pm:1135 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "சேவைகள்: %d பதிவான %d செயல்படுத்தப்பட்டது " #: install_steps_interactive.pm:1147 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: install_steps_interactive.pm:1228 #, c-format msgid "Preparing bootloader..." msgstr "துவங்குநிரலை உருவாக்குகிறேன்..." #: install_steps_interactive.pm:1238 #, fuzzy, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்" #: install_steps_interactive.pm:1244 #, c-format msgid "Do you want to use aboot?" msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்" #: install_steps_interactive.pm:1247 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்" #: install_steps_interactive.pm:1264 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1293 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "வெற்று நெகிழ்வட்ைட %s இயக்கியில் உள்ளிடவும்" #: install_steps_interactive.pm:1298 #, fuzzy, c-format msgid "Please insert another floppy for drivers disk" msgstr "தயவுசெய்து தொடங்குவட்ைட மீண்டும் %s இயக்கியில் போடவும்" #: install_steps_interactive.pm:1300 #, c-format msgid "Creating auto install floppy..." msgstr "தானியங்கி நிறுவல்வட்ைட உருவாக்கவும்" #: install_steps_interactive.pm:1312 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "சில செயல்கள் இன்னும் முடிக்கப்படவில்ைல\n" "\n" "நீங்கள் நிச்சயம் நிறுவுதலை விட்டு வெளியேற விரும்புகிறீர்களா?" #: install_steps_interactive.pm:1322 standalone/draksambashare:416 #: standalone/draksambashare:523 standalone/drakups:120 standalone/drakups:159 #: standalone/logdrake:452 standalone/logdrake:458 #, c-format msgid "Congratulations" msgstr "வாழ்த்துக்கள்" #: install_steps_interactive.pm:1330 install_steps_interactive.pm:1331 #, c-format msgid "Generate auto install floppy" msgstr "தானியங்கி நிறுவல்வட்ைட உருவாக்கவும்" #: install_steps_interactive.pm:1332 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "தானியங்கி நிறுவல்வட்டின் மூலம் நீங்கள் நிறுவலை ,\n" "முழுதும் தானாக நிறுவ வைக்கலாம்,\n" "இது இன்னும் பல கணினிகளில் இதே போல் நிறுவ,\n" "பயன்படலாம்,\n" ",\n" "நீங்கள் மீண்டும் ஒருமுறை உங்கள் நிறுவலை மறு இயக்கம் செய்யலாம்,\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "மாண்ட்ேரக் லினக்ஸ் நிறுவல் %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / between elements | selects | next screen " #: interactive.pm:196 #, c-format msgid "Choose a file" msgstr "கோப்பு ஒன்றைத் தேர்வுச் செய்" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakbackup:1517 #: standalone/drakfont:655 standalone/drakhosts:242 standalone/draknfs:605 #: standalone/draksambashare:1123 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319 #: standalone/drakvpn:680 #, c-format msgid "Add" msgstr "சேர்" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:249 #: standalone/draknfs:612 standalone/draksambashare:1080 #: standalone/draksambashare:1133 standalone/draksambashare:1172 #, c-format msgid "Modify" msgstr "மாற்று" #: interactive.pm:321 interactive/gtk.pm:507 standalone/drakhosts:256 #: standalone/draknfs:619 standalone/draksambashare:1081 #: standalone/draksambashare:1141 standalone/draksambashare:1180 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "நீக்கு" #: interactive.pm:398 #, c-format msgid "Basic" msgstr "தொடக்க" #: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490 #, c-format msgid "Finish" msgstr "முடிந்தது" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "அேத" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "தவறான தேர்வு, மீண்டும் முயற்சித்து பார்க்கவும்\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "உங்கள் தேர்வு? (கொடாநிலை %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "நீங்கள் நிரப்ப வேண்டியவை \n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "உங்கள் தேர்வு? (0/1 கொடாநிலை %s)" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "பொத்தான் %s: %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "நீங்கள் இந்த பொத்தானை கிளிக் செய்ய வேண்டுமா?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "உங்கள் தேர்வு? (கொடாநிலை `%s'%s)" #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "enter `void' for void entry" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> தேர்வுச் செய்வதற்கு பல உள்ளன(%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "தயவுசெய்து நீங்கள் விரும்பும் 10-வீச்சின் முதல் எண்ணை தேர்வுச் செய்,\n" "அல்லது நுழைவு சாவியை தட்டி தொடரவும்\n" "உங்கள் தேர்வு? " #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> கவனிக்கவும், பெயர் மாறியுள்ளது\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "மீண்டும் சமர்பித்தல்" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "செக்(குவர்டி)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "ெஜர்மன்" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "வோராக்" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "ஸ்பானிஷ்" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "பின்னிஷ்" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "பிரஞ்சு " #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "நார்ேவ " #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "பொலிஸ்" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "ரஷியன்" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "சுவிடிஷ்" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "ஆங்கில விசைப்பலகை" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "அமெரிக்க விசைப்பலகை" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "அல்பேனியன்" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "ஆர்மினியன்(பழைய)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "ஆர்மினியன்(தட்டச்சு)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "ஆர்மினியன்(ஒலியமைப்பு)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "அசர்பைஜான்" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "பெல்ஜியன்" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "வங்காளம் (Inscript)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "வங்காளம் (Probhat)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "பல்ேகரிய(ஒலியமைப்பு)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "பல்ேகரிய(பிடிஸ)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "பிரேசில்" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "போஸ்னியா" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "பேலாருஸ்" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "சுவிஷ்(ெஜர்மன்)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "சுவிஷ்(பிரெஞ்சு)" #: keyboard.pm:204 #, fuzzy, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "செர்பிய" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "செக்(குவர்ட்டி)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "ெஜர்மன்(ெடட் விைச இல்லாமல்" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "ேதவநாகரி" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "டச்சு" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "வோரக்(US)" #: keyboard.pm:215 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "வோரக்(நார்ேவ)" #: keyboard.pm:217 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "வோரக்(US)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "வோரக்(நார்ேவ)" #: keyboard.pm:220 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "வோரக்-சுவிடிசு " #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "வோரக்-சுவிடிசு " #: keyboard.pm:222 #, fuzzy, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "போஸ்னியா" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "எஸ்ேதானியா" #: keyboard.pm:227 #, fuzzy, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "கிரேக்கம் " #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "ஜார்ஜியா(\"Russian\" layout)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "ஜார்ஜியா" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "கிரேக்கம் " #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "குஜராத்தி" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "குரேசிய " #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "அங்கேரிய " #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "இஸ்ரலேிய" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "இஸ்ரலேிய(ஒலியமைப்பு)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "இரானிய" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "ஐஸ்லாந்து " #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "இத்தாலிய " #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "ஜப்பானிய 106 விசை" #: keyboard.pm:249 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "கனடா" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "கொரிய விசைப்பலகை" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "ஆர்மினியன்(ஒலியமைப்பு)" #: keyboard.pm:255 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "ஆங்கில விசைப்பலகை" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "லத்தின் அமெரிக்க" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "லாவோஸ்" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "லிதுவேனிய-புதிய" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "லிதுவேனிய-குவர்ட்டி" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "லாட்விய" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "மலையாளம்" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "மாசிடோனிய" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "மியான்மார்(பர்மீஸ்)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "மங்ேகாலியன்(சிரிலிக்)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "மால்டீஸ்(UK)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "மால்டீஸ்(US)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "டச்சு" #: keyboard.pm:273 #, fuzzy, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "லைபிரியா" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "பொலிஷ்(குவர்ட்டி)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "பொலிஷ்(குவார்ட்ஸ்)" #: keyboard.pm:277 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "பொலிஸ்" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "போர்த்துகிசிய" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "கனடிய(Quebec)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "ரோமேனிய(குவார்ட்ஸ்)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "ரோமேனிய(குவர்ட்டி)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "ரஷிய(ஒலியமைப்பு)" #: keyboard.pm:286 #, fuzzy, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "வோரக்(நார்ேவ)" #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "தாய் விசைப்பலகை" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "சுலோவெனிய" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "சுலோவெனிய(குவார்ட்ஸ்)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "சுலோவெனிய(குவர்ட்டி)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "செர்பிய" #: keyboard.pm:298 #, fuzzy, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "தொடர்நிலைத் துறை" #: keyboard.pm:299 #, fuzzy, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "ஆர்மினியன்(ஒலியமைப்பு)" #: keyboard.pm:300 #, fuzzy, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "பெல்ஜியம்" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "தமிழ்(இஸ்கி) " #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "தமிழ்(தட்டச்சு)" #: keyboard.pm:304 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "தாய் விசைப்பலகை" #: keyboard.pm:305 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "தாய் விசைப்பலகை" #: keyboard.pm:307 #, fuzzy, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "தாய் விசைப்பலகை" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "தாஜிக் விசைப்பலகை" #: keyboard.pm:315 #, fuzzy, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "ெஜர்மன்" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "துருக்கிய " #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "புது துருக்கிய " #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "உக்ேரனிய" #: keyboard.pm:322 #, fuzzy, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "லைபிரியா" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "அமெரிக்க விசைப்பலகை(சர்வதேச)" #: keyboard.pm:325 #, fuzzy, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "செர்பிய" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "வியட்நாமிய " #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "யுகோஸ்சுலோவிய" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "வலது Alt விசை" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "இரண்டு Shift விசைகளும் ஒன்றாக" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Control மற்றும் Shift விசைகளும் ஒன்றாக" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock விசை" #: keyboard.pm:339 #, fuzzy, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Ctrl மற்றும் Alt விசைகளும் ஒன்றாக" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl மற்றும் Alt விசைகளும் ஒன்றாக" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt மற்றும் Shift விசைகளும் ஒன்றாக" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"Menu\" விசை" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "இடது விண்ேடாஸ் விசை" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "வலது விண்ேடாஸ் விசை" #: keyboard.pm:345 #, fuzzy, c-format msgid "Both Control keys simultaneously" msgstr "இரண்டு Shift விசைகளும் ஒன்றாக" #: keyboard.pm:346 #, fuzzy, c-format msgid "Both Alt keys simultaneously" msgstr "இரண்டு Shift விசைகளும் ஒன்றாக" #: keyboard.pm:347 #, fuzzy, c-format msgid "Left Shift key" msgstr "இடது விண்ேடாஸ் விசை" #: keyboard.pm:348 #, fuzzy, c-format msgid "Right Shift key" msgstr "வலது Alt விசை" #: keyboard.pm:349 #, fuzzy, c-format msgid "Left Alt key" msgstr "வலது Alt விசை" #: keyboard.pm:350 #, fuzzy, c-format msgid "Left Control key" msgstr "டிரேக்தொலைப்புழங்கி" #: keyboard.pm:351 #, fuzzy, c-format msgid "Right Control key" msgstr "வலது Alt விசை" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "நீங்கள் பயன்படுத்தவிருக்கும் பலவகை விசைப்பலகை இட அமைவுகளை\n" "மாற்ற எந்த விசை அல்லது விசை சேர்மானங்களை தேர்வுச் செய்க\n" "(உதாரனத்திற்கு தமிழ் மற்றும் ஆங்கிலம்)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "அந்தோரா" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "ஐக்கிய அரபு குடியரசுகள்" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "ஆப்கானிஸ்தான்" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "ஆன்டிகுவா" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "அங்குயிலா" #: lang.pm:200 #, c-format msgid "Albania" msgstr "அல்பேனியா" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "ஆர்மினியா" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "ெநதர்லாந்து ஆன்டிலிஸ்" #: lang.pm:203 #, c-format msgid "Angola" msgstr "அங்கோலா" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "அன்டார்டிகா" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "அர்ெஜன்டினா" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "சாமோ" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "அருபா" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "அசர்பைசான்" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "போஸ்னியா" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "பார்படாஸ்" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "வங்கதேசம்" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "பர்கினா போஸா" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "பல்கேரியா" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "பஹ்ரைன்" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "புருண்டி" #: lang.pm:219 #, c-format msgid "Benin" msgstr "பெனின்" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "பெர்முடா" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "புருனை" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "பொலிவியா" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "பகாமாஸ்" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "பூடான்" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "பொவே தீவுகள்" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "போட்ஸ்வானா" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "பேலாரூஸ்" #: lang.pm:229 #, c-format msgid "Belize" msgstr "பெலிஸ்" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "கோகோ தீவுகள்" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "காங்கோ" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "டீகாட் டைவோர்" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "குக் தீவுகள்" #: lang.pm:238 #, c-format msgid "Chile" msgstr "சிலி" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "கேமருன்" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "சீனா" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "கொலம்பியா " #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "சேர்பியா மற்றும் மொன்டிநீக்ரோ" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "கியுபா" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "கேப் வேர்தி" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "கிருஸ்துமஸ் தீவுகள்" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "சைப்ரஸ்" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "டிஜிபொட்டி" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "டோமினிகா" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "டோமினிகா குடியரசு" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "அல்ஜிரியா" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "இகுவேடார்" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "எகிப்து" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "ேமற்கு சகாரா" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "எரிதிரியா" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "எத்தியோப்பியா" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "பிஜி" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "பாக்லாந்து தீவுகள்" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "ைமக்ேரானிசியா" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "பரோ தீவுகள்" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "கேபான்" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 #: network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "பிரிட்டன்" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "கிரேனடா" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "ஜார்ஜியா" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "பிரஞ்சு கினியா " #: lang.pm:273 #, c-format msgid "Ghana" msgstr "கானா" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "கிப்ரேலடார்" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "கிரின்லாந்து" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "ஜாம்பியா" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "கினியா" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "குவாடிலோப்" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "கினியா" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "குவாடிமாலா" #: lang.pm:283 #, c-format msgid "Guam" msgstr "குவாம்" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "கினியா-பிஸ்ஸ்ாவு" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "கயானா" #: lang.pm:286 #, fuzzy, c-format msgid "Hong Kong SAR (China)" msgstr "ஹாங்காங்" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "ஹெர்ட் மற்றும் மெக்டொனால்ட் தீவுகள்" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "ெஹான்டுரஸ்" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "குரேசியா" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "ைஹதி" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "இந்தோனிசியா" #: lang.pm:295 #, c-format msgid "India" msgstr "இந்தியா" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "பிரிட்டீஷ் தீவுகள்" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "ஈராக்" #: lang.pm:298 #, c-format msgid "Iran" msgstr "ஈரான்" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "ஐஸ்லாந்து" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "ஜமைக்கா" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "ஜோர்டான்" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "கென்யா" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "கிரிகிஸ்தான்" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "கம்போடியா" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "கிரிபாடி" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "கோமோரஸ்" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "ெசயின்ட் கிட்ஸ் ெநவிஸ்" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "" #: lang.pm:311 #, c-format msgid "Korea" msgstr "கொரியா" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "குவைத்" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "கேமன் தீவுகள்" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "கசகஸ்தான்" #: lang.pm:315 #, c-format msgid "Laos" msgstr "லாவோஸ்" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "லெபனான்" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "ெசயின்ட் லுசியா" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "இலங்ைக" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "லைபிரியா" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "லெசாதோ" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "Lithuania" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "Luxembourg" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "லாட்வியா" #: lang.pm:325 #, c-format msgid "Libya" msgstr "லிபியா" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "ெமாராக்ேகா" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "ெமானாேகா" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "மால்ேடாவா" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "மடகாஸ்கர்" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "மார்ஷல் தீவுகள்" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "மாசிேடானியா" #: lang.pm:332 #, c-format msgid "Mali" msgstr "மாலி" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "மியான்மர்" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "மங்ேகாலியா" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "வடக்கு மாரியானா தீவுகள்" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "மார்டினிக்" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "ெமாரிஷியானா" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "மான்ட்ெசர்ராட்" #: lang.pm:339 #, c-format msgid "Malta" msgstr "மால்டா" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "ெமாரிஷியஸ்" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "மாலத்தீவு" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "மாலாவி" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "ெமக்சிேகா" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "மலேஷியா" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "ெமாசம்பிக்" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "நமிபியா" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "நியு ெசலடோனியா " #: lang.pm:348 #, c-format msgid "Niger" msgstr "நைஜர்" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "நார்ேபாள்க் தீவு" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "நைஜிரியா" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "நிகரகுவா" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "ேநபாளம்" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "நாவ்ரு" #: lang.pm:356 #, c-format msgid "Niue" msgstr "நிய்யு" #: lang.pm:358 #, c-format msgid "Oman" msgstr "ஓமன்" #: lang.pm:359 #, c-format msgid "Panama" msgstr "பனாமா" #: lang.pm:360 #, c-format msgid "Peru" msgstr "ெபரு" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "பிரஞ்சு பாலினேசியா" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "பப்பாவ் நியு கினியா" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "பிலிப்ைபன்ஸ்" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "பாகிஸ்தான்" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "ெசயின்ட் பியரி மிக்ேகாலன்" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "பிடிகைர்ன்" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "பியுர்ேடா ரிகா" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "பாலஸ்தீனம்" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "பராகுேவ" #: lang.pm:372 #, c-format msgid "Palau" msgstr "பாலாவ்" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "கதார்" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "ரியூனியன்" #: lang.pm:375 #, c-format msgid "Romania" msgstr "ெராமானியா" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "ருவாண்டா" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "சவுதி அேரபியா" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "சாலமன் தீவுகள்" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "சிெசய்ல்ஸ்" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "சுடான்" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "சிங்கப்பூர்" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "ெசயின்ட் ெஹலனா" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "ஸ்ேலாேவனியா" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "சுவால்பார்ட் மற்றும் ேமயன் தீவுகள்" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "சியரா லிேயான்" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "சான் மரிேனா" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "ெசனகல்" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "சோமாலியா" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "சுரினாம்" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "சாவ் ேதாம் பிரின்சிப்" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "எல் சால்வேடார்" #: lang.pm:395 #, c-format msgid "Syria" msgstr "சிரியா" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "சுவாஸிலாந்து" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "துருக்கிய மற்றும் ேகய்கஸ் தீவுகள்" #: lang.pm:398 #, c-format msgid "Chad" msgstr "சாட்" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "பிரஞ்சு தென் குடியிருப்பு" #: lang.pm:400 #, c-format msgid "Togo" msgstr "ெதாேகா" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "தஜிகிஸ்தான்" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "ெடாெகலாவ்" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "கிழக்கு தைமூர்" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "துருக்ெமனிஸ்தான்" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "துனிஷியா" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "ேடாங்கா" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "துருக்கி" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "டிரினிடட் மற்றும் ெடாபாேகா" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "துவாலு" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "டான்சானியா" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "உக்ைரன்" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "உகாண்டா" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "United States Minor Outlying Islands" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "உருகுேவ" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "உஸ்ெபகிஸ்தான்" #: lang.pm:419 #, fuzzy, c-format msgid "Vatican" msgstr "லாட்விய" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "ெசயின்ட் வின்ெசன்ட் மற்றும் கிரிேனடைன்" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "ெவனிசுலா" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "விர்ஜின் தீவுகள்(பிரிட்டிஷ்)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "விர்ஜின் தீவுகள்(அெமரிக்க)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "வியட்நாம் " #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "வனுவாடு" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "சாேமாவோ" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "ேயமன்" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "ேமயோட்" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "ஜாம்பியா" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "ஜிம்பாப்ேவ" #: lang.pm:1141 #, c-format msgid "Welcome to %s" msgstr "%s க்கு நல்வரவு " #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:145 #, c-format msgid "Remove the logical volumes first\n" msgstr "ஏரண வகிற்ைற முதலில் நீக்கு\n" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physicals volumes" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1027 #, c-format msgid "Parameters" msgstr "வரைமுறை" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "" #: modules/interactive.pm:22 #, fuzzy, c-format msgid "Module configuration" msgstr "கைமுறை வடிவமைப்பு " #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "கூற்ைற நீங்கள் இங்கே வடிவமைக்கலாம்" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "%s இடைமுக அட்ைடகள் உள்ளன" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "மேலும் உள்ளனவா?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "நீங்கள் %s இடைமுக அட்ைடகள் ஏதேனும் பயன்படுத்துகிறிர்களா?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "வன்ெபாருட்களின் விவரங்களைப் பாருங்கள்" #: modules/interactive.pm:82 #, fuzzy, c-format msgid "Installing driver for USB controller" msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது" #: modules/interactive.pm:83 #, fuzzy, c-format msgid "Installing driver for firewire controller %s" msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது" #: modules/interactive.pm:84 #, fuzzy, c-format msgid "Installing driver for hard drive controller %s" msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது" #: modules/interactive.pm:85 #, fuzzy, c-format msgid "Installing driver for ethernet controller %s" msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(%s கூறு)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "%s.கூறுக்கான விருப்பத்ேதர்வுகளை தாருங்கள்\n" "0x like '0x123' போன்ற துவக்கத்துடன் அது இருக்கவேண்டும்" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "%s.கூறுக்கான விருப்பத்ேதர்வுகளை தாருங்கள்\n" "பெயர்=மதிப்பு என்ற அமைப்பில் இருக்கவேண்டும்...''.\n" "உதாரனத்திற்கு , ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "கூறு அமைப்புகள்" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "இந்த %s க்கு எந்த இயக்க நிரலை பயன்படுத்த வேண்டும்?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "இந்த %s க்கு எந்த இயக்க நிரலை பயன்படுத்த சில\n" "அதிக விவரங்கள் தேவை. இதை நீங்கள் தருகிறீர்களாஅல்லது \n" "டிரேக்x தன்னியக்கத் தேடியறிதல் செய்யட்டுமா\n" "இது எப்ேபாதாவது உங்கள் கணினி தொங்கல் நிலைக்கு இட்டுச் செல்லலாம்\n" "ஆனால் எதனையும் செயலிழக்கச் செய்யாது" #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "தன்னியக்கத் தேடியறிதல்" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "விருப்பத்ேதர்வு தெரிவிக்கவும்" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s என்ற இயக்க நிரல் ஏற்றத்தில் பிழை நேர்ந்துள்ளது\n" "நீங்கள் வேறு விருப்பத்ேதர்வுகளை தெரிவித்து பார்க்கவும்" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "ஒரு எண்" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d, கமாவால் பிரிக்கப்பட்ட எண்கள்" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d, கமாவால் பிரிக்கப்பட்ட சரங்கள்" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "கமாவால் பிரிக்கப்பட்ட எண்கள்" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "கமாவால் பிரிக்கப்பட்ட சரங்கள்" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "சன்-எலி" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "இயல்பான" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "லாஜிடெக்- Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "பொதுவான PS2 சக்கர எலி" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "கிளைட்பாயின்ட்-GlidePoint" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86 #: network/modem.pm:115 network/netconnect.pm:580 network/netconnect.pm:585 #: network/netconnect.pm:597 network/netconnect.pm:602 #: network/netconnect.pm:618 network/netconnect.pm:620 #, c-format msgid "Automatic" msgstr "தானாக" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "கென்ஸிங்க்டன் சிந்திக்கும் எலி-Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "ஜினியஸ் நெட்எலி-Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "ஜினியஸ் நெட்சக்கரஎலி-Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "மைக்ேரசாப்ட் Explorer-மேலோடி" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 பொத்தான்" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "பொதுவான 2 பொத்தான் எலி" #: mouse.pm:50 mouse.pm:59 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "பொதுவான 3 பொத்தான் எலி" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "சக்கரம்" #: mouse.pm:55 #, c-format msgid "serial" msgstr "தொடர்நிலைத் துறை" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "பொதுவான 3 பொத்தான் எலி" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "மைக்ேரசாப்ட் இன்டெலி" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "லாஜிடெக் எலி-Logitech MouseMan" #: mouse.pm:62 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "லாஜிடெக் எலி-Logitech MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "எலி இயக்கங்கள்" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "லாஜிடெக் CC வகை எலி" #: mouse.pm:66 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "லாஜிடெக் CC வகை எலி" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "லாஜிடெக் MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM வகை" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "லாஜிடெக் எலி(பழைய, C7 வகை)" #: mouse.pm:72 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "லாஜிடெக் எலி(பழைய, C7 வகை)" #: mouse.pm:74 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "கென்ஸிங்க்டன் சிந்திக்கும் எலி-Kensington Thinking Mouse" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "பஸ்எலி" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 பொத்தான்கள்" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 பொத்தான்கள்" #: mouse.pm:82 #, fuzzy, c-format msgid "3 buttons with Wheel emulation" msgstr "பொத்தான் போன்மி" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "உலகளாவிய" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "மைக்ேரசாப்ட் Explorer-மேலோடி" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "ஒன்றுமில்ைல" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "எலி ஏதுமில்ைல" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "சிறுகுறிப்பு டச்பாட்" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "தயவுசெய்து, உங்கள் எலியை சோதனை செய்யுங்கள்" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "உங்கள் எலியை செயல்பட வைக்க" #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "உங்கள் சக்கரத்ைத உருட்டுங்கள்" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "இணையத்தள சேவையகம்" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "DNS சேவையகம்" #: network/drakfirewall.pm:22 #, fuzzy, c-format msgid "SSH server" msgstr "சேவையகம்" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP பாிமாறி" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "மின்னஞ்சல் சேவையகம்" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP and IMAP வகை மின்னஞ்சல் சேவையகம்" #: network/drakfirewall.pm:42 #, fuzzy, c-format msgid "Telnet server" msgstr "X-பரிமாறி" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "" #: network/drakfirewall.pm:54 #, fuzzy, c-format msgid "CUPS server" msgstr "CUPS சேவையக IP" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "" #: network/drakfirewall.pm:74 #, c-format msgid "Port scan detection" msgstr "" #: network/drakfirewall.pm:165 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" "நெருப்புச்சுவர் வடிவமைப்பு\n" "\n" "இங்கு அளிக்கப்படும் பதில்கள் உங்கள் கணினியின்\n" "பாதுகாப்பு சார்ந்தது. கவணம் தேவை\n" "நீங்கள் இந்த நிரலை எப்ேபாது வேண்டுமானாலும் இயக்கலாம்" #: network/drakfirewall.pm:171 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "நெருப்புச்சுவர் வடிவமைப்பு\n" "\n" "நீங்கள் டிேரக்இைணப்பான் மூலம் முதலில் உங்கள் இைணயத்ெதாடர்ைப\n" "வடிவமைத்த பிறகு இந்த நிரலை இயக்கலாம்" #: network/drakfirewall.pm:188 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "நிங்கள் எந்த சேவைகளை இணையத்திலிருந்து அனுமதிக்க விரும்புகிறீர்கள்?" #: network/drakfirewall.pm:191 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "ஏைனய துைறகளைக் கூட நீங்கள் ேதர்வு ெசய்யலாம்சரியான உதாரனங்கள்: 139/tcp 139/udp 600:610/" "tcp 600:610/udp.\n" "விவரங்களுக்கு /etc/services ேகாப்ைப பார்க்கவும்" #: network/drakfirewall.pm:197 #, fuzzy, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "தவறான துைற ெகாடுக்கப்பட்டது: %s.\n" "சரியான முறை \"port/tcp\" or \"port/udp\", \n" "அதில் துைற(port) 1க்கும் 65535 க்கும் இைடப்பட்டது" #: network/drakfirewall.pm:207 #, c-format msgid "Everything (no firewall)" msgstr "அைனத்தும்(ெநருப்புச்சுவர் ெசயல்படவில்ைல)" #: network/drakfirewall.pm:209 #, c-format msgid "Other ports" msgstr "மற்ற துறைகளை" #: network/drakfirewall.pm:251 network/drakfirewall.pm:254 #: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145 #: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189 #: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:201 #: standalone/net_applet:379 standalone/net_applet:416 #, fuzzy, c-format msgid "Interactive Firewall" msgstr "நெருப்புச்சுவர்" #: network/drakfirewall.pm:252 #, c-format msgid "" "You can be warned when someone accesses to a service or tries to intrude " "into your computer.\n" "Please select which network activity should be watched." msgstr "" #: network/drakfirewall.pm:257 #, c-format msgid "Use Interactive Firewall" msgstr "" #: network/ifw.pm:136 #, fuzzy, c-format msgid "Port scanning" msgstr "பகிர்தல் கிடையாது" #: network/ifw.pm:137 #, fuzzy, c-format msgid "Service attack" msgstr "(_t)சேவை வகை:" #: network/ifw.pm:138 #, fuzzy, c-format msgid "Password cracking" msgstr "கடவுச்ெசால் (மீண்டும்)" #: network/ifw.pm:139 #, c-format msgid "\"%s\" attack" msgstr "" #: network/ifw.pm:141 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: network/ifw.pm:142 #, fuzzy, c-format msgid "The %s service has been attacked by %s." msgstr "இந்த நிகழ்வு மாற்றப்பட்டது" #: network/ifw.pm:143 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: network/ifw.pm:144 #, fuzzy, c-format msgid "A \"%s\" attack has been attempted by %s" msgstr "இந்த நிகழ்வு மாற்றப்பட்டது" #: network/isdn.pm:117 network/netconnect.pm:452 network/netconnect.pm:541 #: network/netconnect.pm:544 network/netconnect.pm:687 #: network/netconnect.pm:691 #, c-format msgid "Unlisted - edit manually" msgstr "" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:160 network/netconnect.pm:384 #, c-format msgid "I do not know" msgstr "எனக்கு தெரியாது" #: network/isdn.pm:161 network/netconnect.pm:384 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:162 network/netconnect.pm:384 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/netconnect.pm:585 network/netconnect.pm:602 #: network/netconnect.pm:618 #, c-format msgid "Manual" msgstr "கைமுறையாக" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:69 network/netconnect.pm:482 #: network/netconnect.pm:489 #, fuzzy, c-format msgid "Manual choice" msgstr "மியான்மர்" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "உள்ளமை ISDN ேமாடம்" #: network/netconnect.pm:80 printer/printerdrake.pm:1643 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "கைமுறை வடிவமைப்பு " #: network/netconnect.pm:81 standalone/drakroam:121 #, fuzzy, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "தன்னியக்க IP" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "ஏனைய பகுதிகளில் பயன்படுத்தப்படும் வரைமுறை" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "ஐரோப்பிய வரைமுறை(EDSS1)" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "ஏனைய பகுதிகளில் பயன்படுத்தப்படும் வரைமுறை\n" "No D-Channel (குத்தகை இணைப்புகள்)" #: network/netconnect.pm:103 standalone/harddrake2:309 #: standalone/net_monitor:102 standalone/net_monitor:103 #: standalone/net_monitor:108 #, c-format msgid "unknown" msgstr "தெரியாத" #: network/netconnect.pm:120 network/thirdparty.pm:219 #, fuzzy, c-format msgid "Alcatel speedtouch USB modem" msgstr "அல்காடெல் ஸ்பிட்டச் -Alcatel speedtouch usb" #: network/netconnect.pm:121 #, fuzzy, c-format msgid "Sagem USB modem" msgstr "இயக்க முறைமை" #: network/netconnect.pm:122 #, c-format msgid "Bewan modem" msgstr "" #: network/netconnect.pm:123 #, c-format msgid "ECI Hi-Focus modem" msgstr "" #: network/netconnect.pm:127 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:128 #, fuzzy, c-format msgid "Manual TCP/IP configuration" msgstr "கைமுறை வடிவமைப்பு " #: network/netconnect.pm:129 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:130 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:131 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:132 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:136 #, fuzzy, c-format msgid "Bridged Ethernet LLC" msgstr "வலையமைப்பு அட்ைட" #: network/netconnect.pm:137 #, fuzzy, c-format msgid "Bridged Ethernet VC" msgstr "வலையமைப்பு அட்ைட" #: network/netconnect.pm:138 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:139 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:140 #, c-format msgid "PPPoA LLC" msgstr "" #: network/netconnect.pm:141 #, c-format msgid "PPPoA VC" msgstr "" #: network/netconnect.pm:145 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "கட்டளைத்ெதாடர் வழியாக" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "PAP-பொதுவாக நம்நாட்டில் இதுதான் உள்ளது" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "முனையம் வழியாக" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:239 standalone/drakconnect:56 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "வலையமைப்பாக்க வடிவமைப்பு " #: network/netconnect.pm:245 #, c-format msgid "LAN connection" msgstr "LAN இணைப்பு" #: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:182 #: standalone/drakroam:220 standalone/drakroam:223 #, fuzzy, c-format msgid "Wireless connection" msgstr "கேபிள் இணைப்பு" #: network/netconnect.pm:247 #, c-format msgid "ADSL connection" msgstr "ADSL இணைப்பு" #: network/netconnect.pm:248 #, c-format msgid "Cable connection" msgstr "கேபிள் இணைப்பு" #: network/netconnect.pm:249 #, c-format msgid "ISDN connection" msgstr "ISDN இணைப்பு" #: network/netconnect.pm:250 #, fuzzy, c-format msgid "Modem connection" msgstr "சாதரன மோடம்வழி தொடர்பு" #: network/netconnect.pm:251 #, c-format msgid "DVB connection" msgstr "" #: network/netconnect.pm:261 #, c-format msgid "Choose the connection you want to configure" msgstr "உங்களுக்கு விருப்பமான இணைப்ேபா வடிவமைக்கவும்" #: network/netconnect.pm:276 network/netconnect.pm:764 #, c-format msgid "Connection Configuration" msgstr "இணையத்ெதாடர்பு வடிவமைப்பாளன்" #: network/netconnect.pm:276 network/netconnect.pm:765 #, c-format msgid "Please fill or check the field below" msgstr "" #: network/netconnect.pm:279 #, c-format msgid "Your personal phone number" msgstr "உங்கள் தொலைபேசி எண்" #: network/netconnect.pm:280 network/netconnect.pm:768 #, c-format msgid "Provider name (ex provider.net)" msgstr "சேவையாளரின் பெயர்" #: network/netconnect.pm:281 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "சேவையாளரின் தொலைபேசி எண்" #: network/netconnect.pm:282 #, fuzzy, c-format msgid "Provider DNS 1 (optional)" msgstr "சேவையாளரின் dns1 சேவையகம்" #: network/netconnect.pm:283 #, fuzzy, c-format msgid "Provider DNS 2 (optional)" msgstr "சேவையாளரின் dns2 சேவையகம்" #: network/netconnect.pm:284 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "அழைக்கும் முறை" #: network/netconnect.pm:285 standalone/drakconnect:449 #: standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "தொடர்பு வேகம்: " #: network/netconnect.pm:286 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "தொடர்பு வெளியேற்ற நேரம்(விநாடிகளில்): " #: network/netconnect.pm:287 network/netconnect.pm:312 #: network/netconnect.pm:771 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "பயனர் பெயர்" #: network/netconnect.pm:288 network/netconnect.pm:313 #: network/netconnect.pm:772 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "பயனரின் கடவுச்ெசால்" #: network/netconnect.pm:289 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "அட்ைடயின் IRQ" #: network/netconnect.pm:290 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "" #: network/netconnect.pm:291 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "அட்ைடயின் உள்/வெளி IO" #: network/netconnect.pm:292 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "அட்ைடயின் உள்/வெளி IO_0" #: network/netconnect.pm:293 #, c-format msgid "Card IO_1" msgstr "அட்ைடயின் உள்/வெளி IO_1" #: network/netconnect.pm:308 #, fuzzy, c-format msgid "Cable: account options" msgstr "அழைப்பு வழி விருப்பத்ேதர்வுகள்" #: network/netconnect.pm:311 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:337 network/netconnect.pm:654 #: network/netconnect.pm:805 network/netconnect.pm:1139 #, fuzzy, c-format msgid "Select the network interface to configure:" msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #: network/netconnect.pm:339 network/netconnect.pm:374 #: network/netconnect.pm:655 network/netconnect.pm:807 network/shorewall.pm:70 #: standalone/drakconnect:713 #, fuzzy, c-format msgid "Net Device" msgstr "துவக்கச்சேவைகள்" #: network/netconnect.pm:340 network/netconnect.pm:345 #, c-format msgid "External ISDN modem" msgstr "ெவளிப்புற ISDN ேமாடம்" #: network/netconnect.pm:373 standalone/harddrake2:216 #, fuzzy, c-format msgid "Select a device!" msgstr "வருடியை தேர்வுச் செய்யுங்கள்" #: network/netconnect.pm:382 network/netconnect.pm:392 #: network/netconnect.pm:402 network/netconnect.pm:435 #: network/netconnect.pm:449 #, c-format msgid "ISDN Configuration" msgstr "ISDN வடிவமைப்பு" #: network/netconnect.pm:383 #, c-format msgid "What kind of card do you have?" msgstr "எவ்வித அட்ைடயை வைத்துதிருக்கிறீர்கள்?" #: network/netconnect.pm:393 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" #: network/netconnect.pm:397 #, c-format msgid "Continue" msgstr "தொடர்க" #: network/netconnect.pm:397 #, c-format msgid "Abort" msgstr "முறித்து விடு" #: network/netconnect.pm:403 #, c-format msgid "Which of the following is your ISDN card?" msgstr "கீேழ உள்ளவற்றுள் நீங்கள் எந்த ISDN அட்ைடயை பயன்படுத்துகிறீர்கள்?" #: network/netconnect.pm:421 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" #: network/netconnect.pm:423 standalone/drakconnect:109 standalone/drakups:251 #: standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "இயக்கநிரல்" #: network/netconnect.pm:435 #, c-format msgid "Which protocol do you want to use?" msgstr "நீங்கள் எந்த வரைமுறையை பயன்படுத்த போகிறீர்கள்?" #: network/netconnect.pm:437 standalone/drakconnect:109 #: standalone/drakconnect:300 standalone/drakconnect:562 #: standalone/drakids:207 standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "வரைமுறை" #: network/netconnect.pm:449 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "உங்கள் இணைய சேவையாளரைத் தேர்வுச் செய்.\n" "இங்கு பட்டியலிடப்படவில்ைல என்றால், பட்டியலிடப்படவில்ைல என்பதை தேர்வுச் செய்யவும்" #: network/netconnect.pm:451 network/netconnect.pm:540 #: network/netconnect.pm:686 #, fuzzy, c-format msgid "Provider:" msgstr "அச்சுப்ெபாறி" #: network/netconnect.pm:460 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: network/netconnect.pm:479 #, fuzzy, c-format msgid "Select the modem to configure:" msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #: network/netconnect.pm:509 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "தயவுசெய்து, உங்கள் மோடம் இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறையை தேர்வுச் செய்யுங்கள்" #: network/netconnect.pm:538 #, fuzzy, c-format msgid "Select your provider:" msgstr "அச்சுபொறி சாரையை ேதர்ந்ெதடு " #: network/netconnect.pm:562 #, fuzzy, c-format msgid "Dialup: account options" msgstr "அழைப்பு வழி விருப்பத்ேதர்வுகள்" #: network/netconnect.pm:565 #, c-format msgid "Connection name" msgstr "தொடர்பின் பெயர்: " #: network/netconnect.pm:566 #, c-format msgid "Phone number" msgstr "அழைக்க வேண்டிய தொலைபேசி எண்" #: network/netconnect.pm:567 #, c-format msgid "Login ID" msgstr "தொடங்கல்பெயர்" #: network/netconnect.pm:582 network/netconnect.pm:615 #, fuzzy, c-format msgid "Dialup: IP parameters" msgstr "வரைமுறை" #: network/netconnect.pm:585 #, fuzzy, c-format msgid "IP parameters" msgstr "வரைமுறை" #: network/netconnect.pm:586 network/netconnect.pm:910 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:882 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286 #, c-format msgid "IP address" msgstr "" #: network/netconnect.pm:587 #, c-format msgid "Subnet mask" msgstr "" #: network/netconnect.pm:599 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:602 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:603 #, c-format msgid "Domain name" msgstr "களத்தின் பெயர்" #: network/netconnect.pm:604 network/netconnect.pm:769 #: standalone/drakconnect:992 #, c-format msgid "First DNS Server (optional)" msgstr "முதல் DNS சேவையகத்தின் பெயர்" #: network/netconnect.pm:605 network/netconnect.pm:770 #: standalone/drakconnect:993 #, c-format msgid "Second DNS Server (optional)" msgstr "2வது DNS சேவையகத்தின் பெயர்" #: network/netconnect.pm:606 #, fuzzy, c-format msgid "Set hostname from IP" msgstr "கணினிப்ெபயர்: " #: network/netconnect.pm:618 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "நுழைவாயில்" #: network/netconnect.pm:619 standalone/drakroam:124 #, fuzzy, c-format msgid "Gateway IP address" msgstr "நுழைவாயில் சாதனம்" #: network/netconnect.pm:654 #, fuzzy, c-format msgid "ADSL configuration" msgstr "LAN வடிவமைப்பு.." #: network/netconnect.pm:684 #, fuzzy, c-format msgid "Please choose your ADSL provider" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: network/netconnect.pm:714 #, c-format msgid "" "Please choose your DSL connection type.\n" "If you do not know it, keep the preselected type." msgstr "" #: network/netconnect.pm:717 #, fuzzy, c-format msgid "ADSL connection type:" msgstr "ADSL இணைப்பு" #: network/netconnect.pm:774 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:775 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:778 #, fuzzy, c-format msgid "Encapsulation:" msgstr "மறைக்குறியீட்டுச் சாவி" #: network/netconnect.pm:809 #, c-format msgid "Manually load a driver" msgstr "" #: network/netconnect.pm:810 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:866 #, fuzzy, c-format msgid "Zeroconf hostname resolution" msgstr "எளிய வடிவமைப்பு கணினிப்ெபயர்: " #: network/netconnect.pm:867 network/netconnect.pm:897 #, fuzzy, c-format msgid "Configuring network device %s (driver %s)" msgstr "வலையமைப்பு அட்ைட %s வடிவமைக்கப்படுகிறது" #: network/netconnect.pm:868 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" #: network/netconnect.pm:898 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: network/netconnect.pm:905 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: network/netconnect.pm:906 standalone/drakconnect:375 #, fuzzy, c-format msgid "DHCP host name" msgstr "கணினிப்ெபயர்: " #: network/netconnect.pm:911 standalone/drakconnect:321 #: standalone/drakconnect:883 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "வளைமுகமூடி" #: network/netconnect.pm:913 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:914 standalone/drakconnect:438 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "வலையமைப்பாக்க வடிவமைப்பு " #: network/netconnect.pm:916 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "தொடங்கலில் துவக்கிவிடு " #: network/netconnect.pm:918 standalone/drakconnect:460 #, fuzzy, c-format msgid "Metric" msgstr "கட்டுபடுத்து" #: network/netconnect.pm:919 #, c-format msgid "Enable IPv6 to IPv4 tunnel" msgstr "" #: network/netconnect.pm:921 standalone/drakconnect:369 #: standalone/drakconnect:886 #, c-format msgid "DHCP client" msgstr "DHCP வேண்டி" #: network/netconnect.pm:923 standalone/drakconnect:379 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "தொடர்பு வெளியேற்ற நேரம்(விநாடிகளில்): " #: network/netconnect.pm:924 standalone/drakconnect:382 #, fuzzy, c-format msgid "Get DNS servers from DHCP" msgstr "DHCP பரிமாறியின் IP" #: network/netconnect.pm:925 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:926 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:934 printer/printerdrake.pm:1897 #: standalone/drakconnect:676 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:938 standalone/drakconnect:680 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "" #: network/netconnect.pm:942 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:947 standalone/drakTermServ:1852 #: standalone/drakTermServ:1853 standalone/drakTermServ:1854 #, c-format msgid "%s already in use\n" msgstr "" #: network/netconnect.pm:987 #, fuzzy, c-format msgid "Choose an ndiswrapper driver" msgstr "X-பரிமாறியைத் தேர்வு செய்" #: network/netconnect.pm:989 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:989 #, fuzzy, c-format msgid "Install a new driver" msgstr "இயக்கத்ைத நிறுவுங்கள்" #: network/netconnect.pm:1001 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1030 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "" #: network/netconnect.pm:1033 standalone/drakconnect:404 #: standalone/drakroam:52 #, fuzzy, c-format msgid "Operating Mode" msgstr "அறிஞர் முறைமை" #: network/netconnect.pm:1034 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:1034 #, c-format msgid "Managed" msgstr "நிர்வகிக்கப்பட்டது" #: network/netconnect.pm:1034 #, c-format msgid "Master" msgstr "பிரதான" #: network/netconnect.pm:1034 #, fuzzy, c-format msgid "Repeater" msgstr "மறுதொடக்கம்" #: network/netconnect.pm:1034 #, c-format msgid "Secondary" msgstr "இரண்டாவது" #: network/netconnect.pm:1034 #, c-format msgid "Auto" msgstr "தானியங்கி" #: network/netconnect.pm:1037 standalone/drakconnect:405 #: standalone/drakroam:115 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1038 standalone/drakroam:116 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1043 #, c-format msgid "Allow access point roaming" msgstr "" #: network/netconnect.pm:1045 standalone/drakconnect:406 #, fuzzy, c-format msgid "Network ID" msgstr "வலையமைப்பு" #: network/netconnect.pm:1046 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1047 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1048 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1049 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1050 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1057 standalone/drakconnect:421 #, fuzzy, c-format msgid "Fragmentation" msgstr "விளையாட்டுகள்" #: network/netconnect.pm:1058 standalone/drakconnect:422 #, c-format msgid "iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1059 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1066 standalone/drakconnect:423 #, c-format msgid "iwspy command extra arguments" msgstr "" #: network/netconnect.pm:1067 #, c-format msgid "" "iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1076 standalone/drakconnect:424 #, c-format msgid "iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:1077 #, c-format msgid "" "iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1092 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1096 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1139 #, c-format msgid "DVB configuration" msgstr "" #: network/netconnect.pm:1140 #, c-format msgid "DVB Adapter" msgstr "" #: network/netconnect.pm:1157 #, c-format msgid "DVB adapter settings" msgstr "" #: network/netconnect.pm:1160 #, c-format msgid "Adapter card" msgstr "" #: network/netconnect.pm:1161 #, c-format msgid "Net demux" msgstr "" #: network/netconnect.pm:1162 #, c-format msgid "PID" msgstr "PID" #: network/netconnect.pm:1190 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: network/netconnect.pm:1195 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1197 standalone/drakconnect:991 #, fuzzy, c-format msgid "Host name (optional)" msgstr "இயக்க வடிவமைப்பு " #: network/netconnect.pm:1197 standalone/drakhosts:197 #, c-format msgid "Host name" msgstr "கணினிப்ெபயர்: " #: network/netconnect.pm:1199 #, fuzzy, c-format msgid "DNS server 1" msgstr "DNS சேவையகம்" #: network/netconnect.pm:1200 #, fuzzy, c-format msgid "DNS server 2" msgstr "DNS சேவையகம்" #: network/netconnect.pm:1201 #, fuzzy, c-format msgid "DNS server 3" msgstr "DNS சேவையகம்" #: network/netconnect.pm:1202 #, fuzzy, c-format msgid "Search domain" msgstr "NIS களம்" #: network/netconnect.pm:1203 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1204 #, c-format msgid "Gateway (e.g. %s)" msgstr "நுழைவாயில்(உதா. %s)" #: network/netconnect.pm:1206 #, c-format msgid "Gateway device" msgstr "நுழைவாயில் சாதனம்" #: network/netconnect.pm:1215 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:1220 standalone/drakconnect:685 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: network/netconnect.pm:1233 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1237 #, c-format msgid "Zeroconf Host name" msgstr "எளிய வடிவமைப்பு கணினிப்ெபயர்: " #: network/netconnect.pm:1240 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1250 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "உங்கள் இணையத்ெதாடர்பை கணினி தொடங்கும்போதே தொடங்கவும்.? பொதுவாக இது தேவையில்ைல" #: network/netconnect.pm:1263 #, c-format msgid "Do you want to start the connection at boot?" msgstr "உங்கள் இணையத்ெதாடர்பை கணினி தொடங்கும்போதே தொடங்கவும்.? பொதுவாக இது தேவையில்ைல" #: network/netconnect.pm:1279 #, fuzzy, c-format msgid "Automatically at boot" msgstr "தொடங்கலில் துவக்கிவிடு " #: network/netconnect.pm:1281 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1283 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1292 #, fuzzy, c-format msgid "How do you want to dial this connection?" msgstr "உங்கள் இணையத்ெதாடர்பை கணினி தொடங்கும்போதே தொடங்கவும்.? பொதுவாக இது தேவையில்ைல" #: network/netconnect.pm:1305 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "நீங்கள் இணையத்ேதடு தற்ேபாது இணைய வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]" #: network/netconnect.pm:1313 standalone/drakconnect:1023 #, c-format msgid "Testing your connection..." msgstr "இணைப்பு சோதித்து பார்க்கப்படுகிறது" #: network/netconnect.pm:1333 #, c-format msgid "The system is now connected to the Internet." msgstr "உங்கள் கணினி தற்ேபாது இணையத்தில் இணைந்துள்ளது" #: network/netconnect.pm:1334 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "பாதுகாப்பு காரனங்களுக்காக, இப்ேபாது துண்டிக்கப்படுகிறது" #: network/netconnect.pm:1335 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "கணினி இைணயத்துடன் இைணக்கப்படவில்ைல.\n" "உங்கள் இணைப்ைப வடிவமைக்கவும்." #: network/netconnect.pm:1350 #, fuzzy, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "வாழ்த்துக்கள், உங்கள் வலையகமைப்பு மற்றும் இணையத் தொடர்பு\n" "வெற்றிகரமாக முடிந்தது. இந்த வடிவமைப்புகள் பயன்படுத்தப்படும்\n" "\n" #: network/netconnect.pm:1353 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: network/netconnect.pm:1354 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" #: network/netconnect.pm:1365 #, fuzzy, c-format msgid "(detected on port %s)" msgstr "%s என்ற துறையில் கண்டுபிடிக்கப்பட்டுள்ளது" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1367 #, fuzzy, c-format msgid "(detected %s)" msgstr " %s கண்டுபிடிக்கப்பட்டுள்ளது" #: network/netconnect.pm:1367 #, fuzzy, c-format msgid "(detected)" msgstr "கண்டுபிடிக்கப்பட்டுள்ளது" #: network/netconnect.pm:1368 #, c-format msgid "Network Configuration" msgstr "வலையமைப்பாக்க வடிவமைப்பு " #: network/netconnect.pm:1369 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: network/netconnect.pm:1372 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும்.ஓப்புதல் தரவும்?" #: network/netconnect.pm:1373 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "வலையகமைப்புச் சேவைகள் மறுதொடங்கும்போது பிழை நேர்ந்துள்ளது \n" "\n" "%s" #: network/netconnect.pm:1374 #, fuzzy, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "\n" "\n" "\n" "நாம் தற்ேபாது %s என்ற தொடர்பை வடிவமைக்கப்ேபாகிறோம்.\n" "\n" "\n" "சரி என்பதை கிளிக் செய்யவும்" #: network/netconnect.pm:1375 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "எவ்வித X வடிவமைப்ேபா வைத்துக்ெகாள்ள விரும்புகிறீர்கள்?" #: network/netconnect.pm:1376 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "நீங்கள் இணையத்ெதாடு பல முறைகளில் தொடர்புக் கொள்ள முடியும்\n" "நீங்கள் பயன்படுத்த விரும்பும் முறையைத் தேர்ந்ெதடு\n" "\n" #: network/netconnect.pm:1377 #, c-format msgid "Internet connection" msgstr "இணையத் தொடர்பு" #: network/netconnect.pm:1394 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" #: network/network.pm:409 network/network.pm:410 #, c-format msgid "Proxies configuration" msgstr "பினாமி வடிவமைப்பு" #: network/network.pm:411 #, c-format msgid "HTTP proxy" msgstr "HTTP பினாமி" #: network/network.pm:412 #, c-format msgid "FTP proxy" msgstr "FTP பினாமி" #: network/network.pm:415 #, c-format msgid "Proxy should be http://..." msgstr "" #: network/network.pm:416 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL எப்ேபாதும் 'http:' அல்லது 'ftp: யுடன் துவங்க வேண்டும்" #: network/shorewall.pm:55 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: network/thirdparty.pm:231 #, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "" #: network/thirdparty.pm:240 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/thirdparty.pm:319 #, fuzzy, c-format msgid "Could not install the packages (%s)!" msgstr "%s பொதி நிறுவப்படுகிறது" #: network/thirdparty.pm:327 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "" #: network/thirdparty.pm:328 #, c-format msgid "" "These packages can be found in Mandriva Club or in Mandriva commercial " "releases." msgstr "" #: network/thirdparty.pm:330 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" #: network/thirdparty.pm:370 #, fuzzy, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல" #: network/thirdparty.pm:372 #, c-format msgid "No Windows system has been detected!" msgstr "" #: network/thirdparty.pm:382 #, fuzzy, c-format msgid "Insert floppy" msgstr " %s ல் நெகிழ்வட்ைட உள்ளிடவும்" #: network/thirdparty.pm:383 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "FAT கோப்பமைப்பில் வடிவூட்டப்பட்ட நெகிழ்தட்ைட %s யின் உள்ளே போடவும்" #: network/thirdparty.pm:393 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?" #: network/thirdparty.pm:403 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/thirdparty.pm:407 network/thirdparty.pm:409 #, fuzzy, c-format msgid "Use a floppy" msgstr "நெகிழ்வட்டில் சேமியுங்கள்" #: network/thirdparty.pm:407 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "விண்ேடாஸ் வகிற்றின் அளவு மாற்றியமைக்கப்படுகிறது" #: network/thirdparty.pm:417 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/thirdparty.pm:422 standalone/drakautoinst:250 #: standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "வாழ்த்துக்கள்!" #: network/thirdparty.pm:422 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/thirdparty.pm:490 #, c-format msgid "Looking for required software and drivers..." msgstr "" #: network/thirdparty.pm:495 #, fuzzy, c-format msgid "Please wait, running device configuration commands..." msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: network/wireless.pm:8 #, c-format msgid "Open WEP" msgstr "" #: network/wireless.pm:9 #, c-format msgid "Restricted WEP" msgstr "" #: network/wireless.pm:10 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "ஏற்றத்தில் பிழை நேர்ந்துள்ளது: " #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s: %s என்ற பிைழயான ேகாப்பிலிருற்து நிறுவப்பட்டது" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "பிழையான காப்பு ேகாப்பு" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "%s என்ற ேகாப்ைப எழுதுவதில் பிைழ" #: partition_table/raw.pm:253 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "வன்வட்டில் ஏேதா பழுது ேநர்ந்துள்ளது\n" "அதனால் நீங்கள் எழுத விரும்பும் விவரங்களை இழக்க\n" "ேநரிடும்" #: pkgs.pm:21 #, c-format msgid "must have" msgstr "நிச்சயம் இருக்க வேண்டியவை" #: pkgs.pm:22 #, c-format msgid "important" msgstr "முக்கியமானவை" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "மிக அழகானவை" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "அழகானவை" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "தேவைப்பட்டால்" #: pkgs.pm:473 #, fuzzy, c-format msgid "Downloading file %s..." msgstr "கோப்புகளைக் கண்டுபிடி " #: printer/cups.pm:105 #, c-format msgid "(on %s)" msgstr "(%s ல்)" #: printer/cups.pm:105 #, c-format msgid "(on this machine)" msgstr "(கணினியில் உள்ளது)" #: printer/cups.pm:117 standalone/printerdrake:200 #, fuzzy, c-format msgid "Configured on other machines" msgstr "இணையத்ெதாடர்பை வடிவமையுங்கள்" #: printer/cups.pm:119 #, c-format msgid "On CUPS server \"%s\"" msgstr "\"%s\" கப்ஸ் ேசவையகத்தில் உள்ளது" #: printer/cups.pm:119 printer/printerdrake.pm:5064 #: printer/printerdrake.pm:5074 printer/printerdrake.pm:5233 #: printer/printerdrake.pm:5244 printer/printerdrake.pm:5458 #, c-format msgid " (Default)" msgstr " (கொடாநிலை)" #: printer/data.pm:67 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "" #: printer/data.pm:68 #, c-format msgid "PDQ" msgstr "PDQ-அச்சு செயலியின் சாரம்" #: printer/data.pm:80 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD- அச்சுெபாறி ேடமன்" #: printer/data.pm:81 #, c-format msgid "LPD" msgstr "LPD-அச்சு செயலி" #: printer/data.pm:102 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng- புதிய தலைமுறை LPR " #: printer/data.pm:103 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:128 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "கப்ஸ்- ெபாதுவான யுனிக்ஸ் அச்சுெபாறி அைமப்பு" #: printer/data.pm:158 #, fuzzy, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "கப்ஸ்- ெபாதுவான யுனிக்ஸ் அச்சுெபாறி அைமப்பு" #: printer/data.pm:159 #, fuzzy, c-format msgid "Remote CUPS" msgstr "தொலை கப்ஸ் சேவையகம்" #: printer/detect.pm:166 printer/detect.pm:250 printer/detect.pm:485 #: printer/detect.pm:558 #, c-format msgid "Unknown Model" msgstr "தெரியாத சாதனம்" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "உள்ளமைக் அச்சுப்ெபாறி" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "தொலைவு அச்சுப்ெபாறி" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "தொலைவு CUPS சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/main.pm:30 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1920 #, c-format msgid "Printer on remote lpd server" msgstr "தொலைவு lpd சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "வலையமைப்புக் அச்சுப்ெபாறி(TCP/Socket)" #: printer/main.pm:32 #, fuzzy, c-format msgid "Printer on SMB/Windows server" msgstr "தொலைவு சம்பா சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "தொலைவு NetWare சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/main.pm:34 printer/printerdrake.pm:1924 #, c-format msgid "Enter a printer device URI" msgstr "அச்சுப்ெபாறியின் முகவரி" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "வேலையை கட்டளைக்கு அனுப்பு" #: printer/main.pm:46 #, c-format msgid "recommended" msgstr "இதை பயன்படுத்துங்கள்" #: printer/main.pm:330 printer/main.pm:690 printer/main.pm:1808 #: printer/main.pm:2981 printer/main.pm:2990 printer/printerdrake.pm:973 #: printer/printerdrake.pm:1133 printer/printerdrake.pm:2408 #: printer/printerdrake.pm:5495 #, c-format msgid "Unknown model" msgstr "தெரியாத மாடல் " #: printer/main.pm:355 standalone/printerdrake:199 #, fuzzy, c-format msgid "Configured on this machine" msgstr "(கணினியில் உள்ளது)" #: printer/main.pm:361 printer/printerdrake.pm:1463 #, c-format msgid " on parallel port #%s" msgstr "இணை துறையில் உள்ளது #%s" #: printer/main.pm:364 printer/printerdrake.pm:1466 #, c-format msgid ", USB printer #%s" msgstr "USB அச்சுப்ெபாறி #%s" #: printer/main.pm:366 #, c-format msgid ", USB printer" msgstr "USB அச்சுப்ெபாறி" #: printer/main.pm:370 #, fuzzy, c-format msgid ", HP printer on a parallel port" msgstr ", இணை துறையில் உள்ளது \\/*%s" #: printer/main.pm:372 #, fuzzy, c-format msgid ", HP printer on USB" msgstr "USB அச்சுப்ெபாறி" #: printer/main.pm:374 #, fuzzy, c-format msgid ", HP printer on HP JetDirect" msgstr ", பலமுனை சாதனம் HP JetDirect துறையில் உள்ளது \\/*%s" #: printer/main.pm:376 #, fuzzy, c-format msgid ", HP printer" msgstr "USB அச்சுப்ெபாறி" #: printer/main.pm:382 #, fuzzy, c-format msgid ", multi-function device on parallel port #%s" msgstr "பலமுனை சாதனம் இணை துறையில் உள்ளது" #: printer/main.pm:385 #, fuzzy, c-format msgid ", multi-function device on a parallel port" msgstr "பலமுனை சாதனம் இணை துறையில் உள்ளது" #: printer/main.pm:387 #, c-format msgid ", multi-function device on USB" msgstr "பலமுனை சாதனம் USB துறையில் உள்ளது" #: printer/main.pm:389 #, fuzzy, c-format msgid ", multi-function device on HP JetDirect" msgstr ", பலமுனை சாதனம் HP JetDirect துறையில் உள்ளது \\/*%s" #: printer/main.pm:391 #, c-format msgid ", multi-function device" msgstr ", பலமுனை சாதனம் " #: printer/main.pm:395 #, c-format msgid ", printing to %s" msgstr "%s க்கு அச்சிடப்படுகிறது" #: printer/main.pm:398 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " \"%s\" LPD ேசவையகத்தில் , அச்சுெபாறி \"%s\" உள்ளது" #: printer/main.pm:401 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr " TCP/IP கணினி \"%s\", துறை \"%s\"" #: printer/main.pm:406 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "பகிர் \"%s\", \"%s\" என்ற சம்பா ேசவையகத்தில் உள்ளது" #: printer/main.pm:411 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " \"%s\" ேநாவல் ேசவையகத்தில் அச்சுப்ெபாாறி \"%s\" உள்ளது" #: printer/main.pm:414 #, c-format msgid ", using command %s" msgstr ", %s என்ற கட்டளையை பயன்படுத்தி" #: printer/main.pm:429 #, fuzzy, c-format msgid "Parallel port #%s" msgstr "இணை துறையில் உள்ளது #%s" #: printer/main.pm:432 printer/printerdrake.pm:1484 #: printer/printerdrake.pm:1511 printer/printerdrake.pm:1529 #, fuzzy, c-format msgid "USB printer #%s" msgstr ", USB அச்சுப்ெபாறி \\/*%s" #: printer/main.pm:434 #, fuzzy, c-format msgid "USB printer" msgstr "USB அச்சுப்ெபாறி" #: printer/main.pm:438 #, fuzzy, c-format msgid "HP printer on a parallel port" msgstr ", இணை துறையில் உள்ளது \\/*%s" #: printer/main.pm:440 #, fuzzy, c-format msgid "HP printer on USB" msgstr "அச்சுபொறி விருப்பத்ேதர்வுகள்" #: printer/main.pm:442 #, fuzzy, c-format msgid "HP printer on HP JetDirect" msgstr ", பலமுனை சாதனம் HP JetDirect துறையில் உள்ளது \\/*%s" #: printer/main.pm:444 #, fuzzy, c-format msgid "HP printer" msgstr "அச்சுப்ெபாறி" #: printer/main.pm:450 #, fuzzy, c-format msgid "Multi-function device on parallel port #%s" msgstr "பலமுனை சாதனம் இணை துறையில் உள்ளது" #: printer/main.pm:453 #, fuzzy, c-format msgid "Multi-function device on a parallel port" msgstr "பலமுனை சாதனம் இணை துறையில் உள்ளது" #: printer/main.pm:455 #, fuzzy, c-format msgid "Multi-function device on USB" msgstr "பலமுனை சாதனம் USB துறையில் உள்ளது" #: printer/main.pm:457 #, fuzzy, c-format msgid "Multi-function device on HP JetDirect" msgstr ", பலமுனை சாதனம் HP JetDirect துறையில் உள்ளது \\/*%s" #: printer/main.pm:459 #, fuzzy, c-format msgid "Multi-function device" msgstr ", பலமுனை சாதனம் " #: printer/main.pm:463 #, fuzzy, c-format msgid "Prints into %s" msgstr "%s க்கு அச்சிடப்படுகிறது" #: printer/main.pm:466 #, fuzzy, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr " \"%s\" LPD ேசவையகத்தில் , அச்சுெபாறி \"%s\" உள்ளது" #: printer/main.pm:469 #, fuzzy, c-format msgid "TCP/IP host \"%s\", port %s" msgstr " TCP/IP கணினி \"%s\", துறை \"%s\"" #: printer/main.pm:474 #, fuzzy, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "பகிர் \"%s\", \"%s\" என்ற சம்பா ேசவையகத்தில் உள்ளது" #: printer/main.pm:479 #, fuzzy, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr " \"%s\" ேநாவல் ேசவையகத்தில் அச்சுப்ெபாாறி \"%s\" உள்ளது" #: printer/main.pm:482 #, fuzzy, c-format msgid "Uses command %s" msgstr ", %s என்ற கட்டளையை பயன்படுத்தி" #: printer/main.pm:484 #, c-format msgid "URI: %s" msgstr "" #: printer/main.pm:687 printer/printerdrake.pm:1060 #: printer/printerdrake.pm:3232 #, c-format msgid "Raw printer (No driver)" msgstr "எளிய அச்சுப்ெபாாறி" #: printer/main.pm:1307 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "உள்ளமை வலையமைப்பு(கள்)" #: printer/main.pm:1309 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "\"%s\" என்ற இைடமுகம்" #: printer/main.pm:1311 #, c-format msgid "Network %s" msgstr "வலையமைப்பு %s" #: printer/main.pm:1313 #, c-format msgid "Host %s" msgstr "கணினிப்ெபயர் %s " #: printer/main.pm:1342 #, c-format msgid "%s (Port %s)" msgstr "%s (துறை %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:67 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "OKI அச்சுபொறியின் வடிவமைப்பு" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: printer/printerdrake.pm:82 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "கோப்பு பகிர்தல்" #: printer/printerdrake.pm:84 #, fuzzy, c-format msgid "Custom configuration" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, fuzzy, c-format msgid "No remote machines" msgstr "தொலைவு அச்சுப்ெபாறி" #: printer/printerdrake.pm:100 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "CUPS சேவையக IP" #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "தானியக்க CUPS வடிவமைப்பு" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4697 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "ஆரம்பி" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "நிறுத்து" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "உள்ளமைக் அச்சுப்ெபாறி" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "" #: printer/printerdrake.pm:188 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "நுழைவிடத்ைத நீக்கு" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "தொலைவு CUPS சேவையகத்தில் உள்ள அச்சுப்ெபறி" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "சேவையகத்தை சேர்க்கவும்" #: printer/printerdrake.pm:364 #, fuzzy, c-format msgid "Edit selected server" msgstr " %s கண்டுபிடிக்கப்பட்டுள்ளது" #: printer/printerdrake.pm:373 #, fuzzy, c-format msgid "Remove selected server" msgstr "நுழைவிடத்தை நீக்கு" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:422 #, fuzzy, c-format msgid "Server IP missing!" msgstr "தொலைவு அச்சுப்ெபறியின் பெயர் இல்ைல!" #: printer/printerdrake.pm:428 #, fuzzy, c-format msgid "The entered IP is not correct.\n" msgstr "அச்சுபொறியின் மாடல் சரி" #: printer/printerdrake.pm:440 printer/printerdrake.pm:2154 #, c-format msgid "The port number should be an integer!" msgstr "" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:462 printer/printerdrake.pm:2181 #: standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "துறை" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "தொலைவு lpd சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4706 #: printer/printerdrake.pm:4772 #, c-format msgid "CUPS server name or IP address missing." msgstr "" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:811 printer/printerdrake.pm:880 #: printer/printerdrake.pm:901 printer/printerdrake.pm:927 #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1078 #: printer/printerdrake.pm:1088 printer/printerdrake.pm:1123 #: printer/printerdrake.pm:2241 printer/printerdrake.pm:2456 #: printer/printerdrake.pm:2488 printer/printerdrake.pm:2550 #: printer/printerdrake.pm:2602 printer/printerdrake.pm:2619 #: printer/printerdrake.pm:2663 printer/printerdrake.pm:2703 #: printer/printerdrake.pm:2753 printer/printerdrake.pm:2790 #: printer/printerdrake.pm:2801 printer/printerdrake.pm:3074 #: printer/printerdrake.pm:3079 printer/printerdrake.pm:3227 #: printer/printerdrake.pm:3338 printer/printerdrake.pm:3951 #: printer/printerdrake.pm:4018 printer/printerdrake.pm:4067 #: printer/printerdrake.pm:4070 printer/printerdrake.pm:4202 #: printer/printerdrake.pm:4303 printer/printerdrake.pm:4375 #: printer/printerdrake.pm:4396 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4497 printer/printerdrake.pm:4592 #: printer/printerdrake.pm:4598 printer/printerdrake.pm:4626 #: printer/printerdrake.pm:4733 printer/printerdrake.pm:4842 #: printer/printerdrake.pm:4862 printer/printerdrake.pm:4871 #: printer/printerdrake.pm:4886 printer/printerdrake.pm:5087 #: printer/printerdrake.pm:5564 printer/printerdrake.pm:5647 #: standalone/printerdrake:75 standalone/printerdrake:590 #, c-format msgid "Printerdrake" msgstr "டிரேக்அச்சுப்ெபாறி" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4304 #: printer/printerdrake.pm:4843 #, c-format msgid "Reading printer data..." msgstr "அச்சுபொறியின் தரவு படிக்கப்படுகிறது... " #: printer/printerdrake.pm:587 #, fuzzy, c-format msgid "Restarting CUPS..." msgstr "மறுதொடக்கம்" #: printer/printerdrake.pm:614 #, c-format msgid "" "Allow pop-up windows, printer setup and package installation may be canceled" msgstr "" #: printer/printerdrake.pm:616 #, c-format msgid "" "No pop-up windows, printer setup and package installation cannot be canceled" msgstr "" #: printer/printerdrake.pm:622 #, fuzzy, c-format msgid "Printer auto administration" msgstr "அச்சுப்ெபாறி தன்னியக்க கண்டுபிடித்தல்" #: printer/printerdrake.pm:623 #, c-format msgid "" "Here you can configure printer administration tasks which should be done " "automatically." msgstr "" #: printer/printerdrake.pm:626 #, fuzzy, c-format msgid "Do automatic configuration of new printers" msgstr "தொலைவு அச்சுப்ெபாறியின் வடிவமைப்பு" #: printer/printerdrake.pm:627 printer/printerdrake.pm:641 #, fuzzy, c-format msgid "when a USB printer is connected and turned on" msgstr " (தயவுசெய்து, உங்கள் அச்சுப்ெபாறி இணைந்துள்ளதா என சோதனை செய்யுங்கள்).\n" #: printer/printerdrake.pm:630 #, fuzzy, c-format msgid "when Printerdrake is started" msgstr "இந்த வகிர் மாற்றியமைக்கப்பட முடியாதது" #: printer/printerdrake.pm:634 #, c-format msgid "Mode for automatic printer setup:" msgstr "" #: printer/printerdrake.pm:640 #, fuzzy, c-format msgid "Re-enable disabled printers" msgstr "நுழைவிடத்ைத நீக்கு" #: printer/printerdrake.pm:644 #, fuzzy, c-format msgid "when the printing system is started" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:680 #, fuzzy, c-format msgid "Communication error handling for the printer \"%s\"" msgstr "தொலைவு அச்சுப்ெபாறியின் வடிவமைப்பு" #: printer/printerdrake.pm:682 #, c-format msgid "" "Here you can configure how errors during the communication between your " "computer and the printer \"%s\" should be handled (for example if the " "printer is not turned on)." msgstr "" #: printer/printerdrake.pm:686 #, c-format msgid "The number of retries should be an integer number of at least 1!" msgstr "" #: printer/printerdrake.pm:690 #, fuzzy, c-format msgid "The delay between retries should be a positive integer number!" msgstr "பயனீட்டாளர் ID இயல் எண்ணாக இருக்க வேண்டும்" #: printer/printerdrake.pm:701 #, fuzzy, c-format msgid "Do not disable the printer" msgstr "சேவையகத்ைத முடமாக்கு" #: printer/printerdrake.pm:704 #, c-format msgid "Retry infinitely often" msgstr "" #: printer/printerdrake.pm:707 #, fuzzy, c-format msgid "Number of retries" msgstr "பொத்தான்களின் எண்ணிக்ைக" #: printer/printerdrake.pm:712 #, c-format msgid "Delay between retries (in sec)" msgstr "" #: printer/printerdrake.pm:745 printer/printerdrake.pm:765 #, c-format msgid "Select Printer Connection" msgstr "அச்சுப்ெபாறி இணைக்கப்பட்டுள்ள விதத்ைத தேர்வு செய்யுங்கள்" #: printer/printerdrake.pm:746 #, c-format msgid "How is the printer connected?" msgstr "அச்சுப்ெபாறி எப்படி இணைக்கப்பட்டுள்ளது?" #: printer/printerdrake.pm:748 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: printer/printerdrake.pm:751 printer/printerdrake.pm:5089 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:758 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" #: printer/printerdrake.pm:760 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:766 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:768 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:772 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "பயனீட்டாளர் ID இயல் எண்ணாக இருக்க வேண்டும்" #: printer/printerdrake.pm:811 #, c-format msgid "Checking your system..." msgstr "உங்கள் கணினி சோதிக்கப்படுகிறது..." #: printer/printerdrake.pm:829 #, fuzzy, c-format msgid "and one unknown printer" msgstr "" "\n" "மற்றும் ஒரு அடையாளம் தெரியாத அச்சுப்ெபாறி" #: printer/printerdrake.pm:831 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "" "\n" "மற்றும் %d அடையாளம் தெரியாத அச்சுப்ெபாறி" #: printer/printerdrake.pm:835 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "நேரடியாக கணினியுடன் இணைந்துள்ளது" #: printer/printerdrake.pm:837 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "நேரடியாக கணினியுடன் இணைந்துள்ளது" #: printer/printerdrake.pm:838 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "நேரடியாக கணினியுடன் இணைந்துள்ளது" #: printer/printerdrake.pm:842 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: printer/printerdrake.pm:843 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: printer/printerdrake.pm:846 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: printer/printerdrake.pm:849 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (தயவுசெய்து, உங்கள் அச்சுப்ெபாறி இணைந்துள்ளதா என சோதனை செய்யுங்கள்).\n" #: printer/printerdrake.pm:862 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:863 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:865 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "மேலே கொடுக்கப்பட்டுள்ள அச்சுப்ெபாறியை அச்சிட பயன்படுத்த வேண்டுமா?\n" #: printer/printerdrake.pm:866 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: printer/printerdrake.pm:867 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: printer/printerdrake.pm:884 #, c-format msgid "Do not setup printer automatically now, and never do it again" msgstr "" #: printer/printerdrake.pm:928 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "உள்ளமைக் அச்சுப்ெபாறி" #: printer/printerdrake.pm:989 #, c-format msgid "Do not setup printer automatically again" msgstr "" #: printer/printerdrake.pm:996 #, fuzzy, c-format msgid "New printers found" msgstr "புதிய அச்சுப்ெபாறியின் பெயர்" #: printer/printerdrake.pm:997 #, fuzzy, c-format msgid "New printer found" msgstr "புதிய அச்சுப்ெபாறியின் பெயர்" #: printer/printerdrake.pm:999 #, c-format msgid "" "The following new printers were found and Printerdrake can automatically set " "them up for you. If you do not want to have all of them set up, unselect the " "ones which should be skipped, or click \"Cancel\" to set up none of them.\n" msgstr "" #: printer/printerdrake.pm:1000 #, c-format msgid "" "The following new printer was found and printerdrake can automatically set " "it up for you. If you do not want to have it set up, unselect it, or click " "\"Cancel\".\n" msgstr "" #: printer/printerdrake.pm:1001 #, c-format msgid "" "Note that for certain printer models additional packages need to be " "installed. So keep your installation media handy.\n" msgstr "" #: printer/printerdrake.pm:1037 printer/printerdrake.pm:1079 #, fuzzy, c-format msgid "Configuring printer on %s..." msgstr "அச்சுப்ெபாறி வடிவமைக்கப்படுகிறது... \"%s\"..." #: printer/printerdrake.pm:1062 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:1063 #, c-format msgid " on " msgstr "" #: printer/printerdrake.pm:1064 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:1069 printer/printerdrake.pm:3239 #, c-format msgid "Printer model selection" msgstr "அச்சுபொறியின் மாடலை தேர்வு" #: printer/printerdrake.pm:1070 printer/printerdrake.pm:3240 #, c-format msgid "Which printer model do you have?" msgstr "உங்கள் அச்சுபொறியின் மாடல் எது?" #: printer/printerdrake.pm:1071 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: printer/printerdrake.pm:1074 printer/printerdrake.pm:3245 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: printer/printerdrake.pm:1089 printer/printerdrake.pm:4863 #, c-format msgid "Configuring printer \"%s\"..." msgstr "அச்சுப்ெபாறி வடிவமைக்கப்படுகிறது... \"%s\"..." #: printer/printerdrake.pm:1124 #, c-format msgid "" "Now you have turned off automatic printer setup.\n" "\n" msgstr "" #: printer/printerdrake.pm:1125 #, c-format msgid "" "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's " "main menu. " msgstr "" #: printer/printerdrake.pm:1125 printer/printerdrake.pm:5139 #, fuzzy, c-format msgid "Configure Auto Administration" msgstr "தொலைவு மேலாண்மை" #: printer/printerdrake.pm:1126 #, c-format msgid "" "There you can also choose in which situation automatic printer setup is done " "(On Printerdrake startup, on printing system startup, when connecting a new " "USB printer)." msgstr "" #: printer/printerdrake.pm:1274 printer/printerdrake.pm:1286 #: printer/printerdrake.pm:1393 printer/printerdrake.pm:2422 #: printer/printerdrake.pm:2437 printer/printerdrake.pm:2509 #: printer/printerdrake.pm:5106 printer/printerdrake.pm:5293 #, c-format msgid "Add a new printer" msgstr "புதிய அச்சுப்ெபாறியை ேசர்க்க" #: printer/printerdrake.pm:1275 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: printer/printerdrake.pm:1288 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1297 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1305 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1314 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1365 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "" #: printer/printerdrake.pm:1368 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: printer/printerdrake.pm:1371 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: printer/printerdrake.pm:1374 #, fuzzy, c-format msgid "No auto-detection" msgstr "தன்னியக்க-கண்டுபிடித்தல்" #: printer/printerdrake.pm:1394 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1430 printer/printerdrake.pm:1662 #: printer/printerdrake.pm:1725 printer/printerdrake.pm:1817 #: printer/printerdrake.pm:1955 printer/printerdrake.pm:2031 #: printer/printerdrake.pm:2198 printer/printerdrake.pm:2291 #: printer/printerdrake.pm:2300 printer/printerdrake.pm:2309 #: printer/printerdrake.pm:2320 printer/printerdrake.pm:2462 #: printer/printerdrake.pm:2562 printer/printerdrake.pm:2608 #: printer/printerdrake.pm:2675 printer/printerdrake.pm:2710 #, fuzzy, c-format msgid "Could not install the %s packages!" msgstr "%s பொதி நிறுவப்படுகிறது" #: printer/printerdrake.pm:1432 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1438 printer/printerdrake.pm:1585 #: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Printer auto-detection" msgstr "அச்சுப்ெபாறி தன்னியக்க கண்டுபிடித்தல்" #: printer/printerdrake.pm:1438 #, c-format msgid "Detecting devices..." msgstr "சாதனங்கள் கண்டுபிடிக்கப்படுகிறது..." #: printer/printerdrake.pm:1469 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1472 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1476 #, c-format msgid "Detected %s" msgstr " %s கண்டுபிடிக்கப்பட்டது" #: printer/printerdrake.pm:1481 printer/printerdrake.pm:1508 #: printer/printerdrake.pm:1526 #, fuzzy, c-format msgid "Printer on parallel port #%s" msgstr ", இணை துறையில் உள்ளது \\/*%s" #: printer/printerdrake.pm:1487 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:1490 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: printer/printerdrake.pm:1571 #, c-format msgid "Local Printer" msgstr "உள்ளமை அச்சுப்ெபாறி" #: printer/printerdrake.pm:1572 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1576 #, c-format msgid "You must enter a device or file name!" msgstr "" #: printer/printerdrake.pm:1586 #, c-format msgid "No printer found!" msgstr "" #: printer/printerdrake.pm:1594 #, c-format msgid "Local Printers" msgstr "உள்ளமை அச்சுப்ெபாறி" #: printer/printerdrake.pm:1595 #, c-format msgid "Available printers" msgstr "" #: printer/printerdrake.pm:1599 printer/printerdrake.pm:1608 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "" "கிழ்கானும் அச்சுப்ெபாறிகள்\n" "\n" #: printer/printerdrake.pm:1601 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: printer/printerdrake.pm:1602 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1603 printer/printerdrake.pm:1612 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: printer/printerdrake.pm:1605 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: printer/printerdrake.pm:1606 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1610 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1611 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1614 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1615 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "தயவுசெய்து, உங்கள் அச்சுப்ெபாறி உள்ள துறையை தேர்வுச் செய்யுங்கள்" #: printer/printerdrake.pm:1617 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1618 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "தயவுசெய்து, உங்கள் அச்சுப்ெபாறி உள்ள துறையை தேர்வுச் செய்யுங்கள்" #: printer/printerdrake.pm:1620 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1624 #, c-format msgid "You must choose/enter a printer/device!" msgstr "" #: printer/printerdrake.pm:1664 printer/printerdrake.pm:1727 #: printer/printerdrake.pm:1819 printer/printerdrake.pm:1957 #: printer/printerdrake.pm:2033 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2293 printer/printerdrake.pm:2302 #: printer/printerdrake.pm:2311 printer/printerdrake.pm:2322 #, fuzzy, c-format msgid "Aborting" msgstr "முறித்து விடு" #: printer/printerdrake.pm:1700 #, c-format msgid "Remote lpd Printer Options" msgstr "" #: printer/printerdrake.pm:1701 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: printer/printerdrake.pm:1702 #, c-format msgid "Remote host name" msgstr "தொலைவு கணினியின் பெயர்" #: printer/printerdrake.pm:1703 #, c-format msgid "Remote printer name" msgstr "தொலைவு அச்சுப்ெபாறியின் பெயர்" #: printer/printerdrake.pm:1706 #, c-format msgid "Remote host name missing!" msgstr "தொலைவு கணினியின் பெயர் இல்ைல!" #: printer/printerdrake.pm:1710 #, c-format msgid "Remote printer name missing!" msgstr "தொலைவு அச்சுப்ெபாறியின் பெயர் இல்ைல!" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 #: printer/printerdrake.pm:2341 standalone/drakTermServ:447 #: standalone/drakTermServ:769 standalone/drakTermServ:785 #: standalone/drakTermServ:1590 standalone/drakTermServ:1599 #: standalone/drakTermServ:1611 standalone/drakbackup:499 #: standalone/drakbackup:605 standalone/drakbackup:640 #: standalone/drakbackup:741 standalone/draknfs:203 #: standalone/draksambashare:623 standalone/draksambashare:790 #: standalone/harddrake2:256 #, c-format msgid "Information" msgstr "தகவல்" #: printer/printerdrake.pm:1740 printer/printerdrake.pm:2216 #: printer/printerdrake.pm:2341 #, c-format msgid "Detected model: %s %s" msgstr "கண்டுபிடிக்கப்பட்ட மாடல்: %s %s" #: printer/printerdrake.pm:1823 printer/printerdrake.pm:2085 #, c-format msgid "Scanning network..." msgstr "" #: printer/printerdrake.pm:1835 printer/printerdrake.pm:1856 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: printer/printerdrake.pm:1838 printer/printerdrake.pm:1859 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: printer/printerdrake.pm:1880 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: printer/printerdrake.pm:1881 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: printer/printerdrake.pm:1882 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: printer/printerdrake.pm:1884 #, c-format msgid "SMB server host" msgstr "சம்பா சேவையகம்" #: printer/printerdrake.pm:1885 #, c-format msgid "SMB server IP" msgstr "சம்பா சேவையகத்தின் IP" #: printer/printerdrake.pm:1886 standalone/draksambashare:61 #, c-format msgid "Share name" msgstr "பகிரின் பெயர்" #: printer/printerdrake.pm:1889 #, c-format msgid "Workgroup" msgstr "பணிக்குழு" #: printer/printerdrake.pm:1891 #, c-format msgid "Auto-detected" msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது" #: printer/printerdrake.pm:1901 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "சேவையகத்தின் பெயர் அல்லது IP முகவரியைக் கொடுக்கவும்" #: printer/printerdrake.pm:1905 #, c-format msgid "Samba share name missing!" msgstr "" #: printer/printerdrake.pm:1911 #, c-format msgid "SECURITY WARNING!" msgstr "" #: printer/printerdrake.pm:1912 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1922 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1925 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: printer/printerdrake.pm:2004 #, c-format msgid "NetWare Printer Options" msgstr "" #: printer/printerdrake.pm:2005 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: printer/printerdrake.pm:2006 #, c-format msgid "Printer Server" msgstr "அச்சுப்ெபாறி சேவையகம்" #: printer/printerdrake.pm:2007 #, c-format msgid "Print Queue Name" msgstr "அச்சுப்ெபாறி சாரையின் பெயர்" #: printer/printerdrake.pm:2012 #, c-format msgid "NCP server name missing!" msgstr "" #: printer/printerdrake.pm:2016 #, c-format msgid "NCP queue name missing!" msgstr "" #: printer/printerdrake.pm:2097 printer/printerdrake.pm:2118 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:2100 printer/printerdrake.pm:2121 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: printer/printerdrake.pm:2143 #, c-format msgid "TCP/Socket Printer Options" msgstr "" #: printer/printerdrake.pm:2145 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: printer/printerdrake.pm:2146 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: printer/printerdrake.pm:2150 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: printer/printerdrake.pm:2179 #, c-format msgid "Printer host name or IP" msgstr "" #: printer/printerdrake.pm:2242 #, fuzzy, c-format msgid "Refreshing Device URI list..." msgstr "அச்சுபொறியின் தரவு மேலேற்றப்படுகிறது..." #: printer/printerdrake.pm:2245 printer/printerdrake.pm:2247 #, c-format msgid "Printer Device URI" msgstr "" #: printer/printerdrake.pm:2246 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:2272 #, c-format msgid "A valid URI must be entered!" msgstr "" #: printer/printerdrake.pm:2377 #, fuzzy, c-format msgid "Pipe into command" msgstr "வேலையை கட்டளைக்கு அனுப்பு" #: printer/printerdrake.pm:2378 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2379 #, c-format msgid "Command line" msgstr "கட்டளை வரி" #: printer/printerdrake.pm:2383 #, c-format msgid "A command line must be entered!" msgstr "" #: printer/printerdrake.pm:2423 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2425 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2426 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2427 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2429 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2431 #: printer/printerdrake.pm:2457 printer/printerdrake.pm:2463 #: printer/printerdrake.pm:2489 #, fuzzy, c-format msgid "HPLIP" msgstr "PL_IP" #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2433 #: printer/printerdrake.pm:2603 printer/printerdrake.pm:2609 #: printer/printerdrake.pm:2620 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2438 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2457 printer/printerdrake.pm:2603 #, c-format msgid "Installing %s package..." msgstr "%s பொதி நிறுவப்படுகிறது..." #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2610 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2479 #, fuzzy, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "தலா-பயனர்ப்படி குனோம் அமை-வடிவ அடைவு `%s': %s படைக்க முடியவில்லை\n" #: printer/printerdrake.pm:2481 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2489 printer/printerdrake.pm:2620 #, c-format msgid "Checking device and configuring %s..." msgstr "" #: printer/printerdrake.pm:2510 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "நீங்கள் எந்த வில்லிற்கு மாற்ற போகிறீர்கள்?" #: printer/printerdrake.pm:2551 printer/printerdrake.pm:2664 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "பொதிகளை நிறுவப்படுகிறது..." #: printer/printerdrake.pm:2564 printer/printerdrake.pm:2677 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2579 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2704 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "பொதிகளை நிறுவப்படுகிறது..." #: printer/printerdrake.pm:2712 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2728 #, fuzzy, c-format msgid "Scanning on your HP multi-function device" msgstr ", பலமுனை சாதனம் " #: printer/printerdrake.pm:2737 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2754 #, fuzzy, c-format msgid "Configuring device..." msgstr "வடிவமைக்கப்படுகிறது..." #: printer/printerdrake.pm:2791 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: printer/printerdrake.pm:2801 printer/printerdrake.pm:3075 #: printer/printerdrake.pm:3228 #, c-format msgid "Reading printer database..." msgstr "அச்சுபொறியின் தரவு படிக்கப்படுகிறது " #: printer/printerdrake.pm:3033 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: printer/printerdrake.pm:3037 printer/printerdrake.pm:4360 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: printer/printerdrake.pm:3043 printer/printerdrake.pm:4365 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: printer/printerdrake.pm:3050 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:3059 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: printer/printerdrake.pm:3060 #, c-format msgid "Name of printer" msgstr "" #: printer/printerdrake.pm:3061 standalone/drakconnect:592 #: standalone/harddrake2:39 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Description" msgstr "குறிப்பு" #: printer/printerdrake.pm:3062 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Location" msgstr "இடம்" #: printer/printerdrake.pm:3080 #, c-format msgid "Preparing printer database..." msgstr "அச்சுபொறியின் தரவு உருவாக்கப்படுகிறது" #: printer/printerdrake.pm:3206 #, c-format msgid "Your printer model" msgstr "அச்சுபொறி மாடல்" #: printer/printerdrake.pm:3207 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:3212 printer/printerdrake.pm:3215 #, c-format msgid "The model is correct" msgstr "அச்சுபொறியின் மாடல் சரி" #: printer/printerdrake.pm:3213 printer/printerdrake.pm:3214 #: printer/printerdrake.pm:3217 #, c-format msgid "Select model manually" msgstr "அச்சுபொறியின் மாடலை கைமுறையாக தேர்வு செய்" #: printer/printerdrake.pm:3241 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:3260 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3292 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:3293 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:3294 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:3295 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:3296 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:3297 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3299 #, fuzzy, c-format msgid "Install PPD file from" msgstr "rpm ெபாதியை நிறுவு" #: printer/printerdrake.pm:3302 printer/printerdrake.pm:3310 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, fuzzy, c-format msgid "Floppy Disk" msgstr "ெநகிழ்வட்டு" #: printer/printerdrake.pm:3303 printer/printerdrake.pm:3312 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, fuzzy, c-format msgid "Other place" msgstr "மற்ற துறைகளை" #: printer/printerdrake.pm:3318 #, fuzzy, c-format msgid "Select PPD file" msgstr "கோப்ேபா தேர்வுச் செய்" #: printer/printerdrake.pm:3322 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:3328 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:3339 #, fuzzy, c-format msgid "Installing PPD file..." msgstr "%s நிறுவப்படுகிறது..." #: printer/printerdrake.pm:3457 #, c-format msgid "OKI winprinter configuration" msgstr "OKI அச்சுபொறியின் வடிவமைப்பு" #: printer/printerdrake.pm:3458 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3483 printer/printerdrake.pm:3513 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark அச்சுபொறியின் வடிவமைப்பு" #: printer/printerdrake.pm:3484 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: printer/printerdrake.pm:3514 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3524 #, fuzzy, c-format msgid "Lexmark X125 configuration" msgstr "Lexmark அச்சுபொறியின் வடிவமைப்பு" #: printer/printerdrake.pm:3525 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" #: printer/printerdrake.pm:3547 #, fuzzy, c-format msgid "Samsung ML/QL-85G configuration" msgstr "ஒலி வடிவமைப்பு" #: printer/printerdrake.pm:3548 printer/printerdrake.pm:3575 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3574 #, fuzzy, c-format msgid "Canon LBP-460/660 configuration" msgstr "கைமுறை வடிவமைப்பு " #: printer/printerdrake.pm:3601 #, fuzzy, c-format msgid "Canon LBP-810/1120 (CAPT) configuration" msgstr "கைமுறை வடிவமைப்பு " #: printer/printerdrake.pm:3602 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes or on the parallel " "port. Please connect your printer to the USB or configure it on the machine " "where it is directly connected to." msgstr "" #: printer/printerdrake.pm:3609 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3759 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3884 #, fuzzy, c-format msgid "Printer default settings" msgstr "அச்சுபொறியின் மாடலை தேர்வு" #: printer/printerdrake.pm:3891 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: printer/printerdrake.pm:3895 #, c-format msgid "Option %s must be a number!" msgstr "" #: printer/printerdrake.pm:3899 #, c-format msgid "Option %s out of range!" msgstr "" #: printer/printerdrake.pm:3951 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: printer/printerdrake.pm:3967 #, c-format msgid "Test pages" msgstr "சோதனை பக்கங்கள்" #: printer/printerdrake.pm:3968 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: printer/printerdrake.pm:3972 #, c-format msgid "No test pages" msgstr "சோதனை பக்கங்கள் ஏதுமில்ைல" #: printer/printerdrake.pm:3973 #, c-format msgid "Print" msgstr "அச்சிடு" #: printer/printerdrake.pm:3998 #, c-format msgid "Standard test page" msgstr "சாதரன சோதனை பக்கம்" #: printer/printerdrake.pm:4001 #, c-format msgid "Alternative test page (Letter)" msgstr "மாற்று சோதனை பக்கங்கள் (கடிதம்)" #: printer/printerdrake.pm:4004 #, c-format msgid "Alternative test page (A4)" msgstr "மாற்று சோதனை பக்கங்கள் (A4)" #: printer/printerdrake.pm:4006 #, c-format msgid "Photo test page" msgstr "ஓளித்ேதற்ற சோதனை பக்கம்" #: printer/printerdrake.pm:4019 printer/printerdrake.pm:4203 #, c-format msgid "Printing test page(s)..." msgstr "சோதனை பக்கங்கள் அச்சிடப்படுகிறது" #: printer/printerdrake.pm:4039 #, fuzzy, c-format msgid "Skipping photo test page." msgstr "ஓளித்ேதற்ற சோதனை பக்கம்" #: printer/printerdrake.pm:4056 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: printer/printerdrake.pm:4060 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: printer/printerdrake.pm:4070 #, c-format msgid "Did it work properly?" msgstr "" #: printer/printerdrake.pm:4094 printer/printerdrake.pm:5496 #, c-format msgid "Raw printer" msgstr "வெற்று அச்சுப்ெபாறி " #: printer/printerdrake.pm:4132 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: printer/printerdrake.pm:4134 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:4137 printer/printerdrake.pm:4154 #: printer/printerdrake.pm:4164 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: printer/printerdrake.pm:4140 printer/printerdrake.pm:4180 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: printer/printerdrake.pm:4144 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: printer/printerdrake.pm:4149 printer/printerdrake.pm:4159 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: printer/printerdrake.pm:4151 printer/printerdrake.pm:4161 #: printer/printerdrake.pm:4171 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:4156 printer/printerdrake.pm:4166 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: printer/printerdrake.pm:4169 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: printer/printerdrake.pm:4173 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:4177 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: printer/printerdrake.pm:4187 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: printer/printerdrake.pm:4188 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: printer/printerdrake.pm:4190 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: printer/printerdrake.pm:4192 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "" #: printer/printerdrake.pm:4193 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: printer/printerdrake.pm:4199 #, c-format msgid "Print option list" msgstr "அச்சு விருப்பத்ேதர்வுகள்" #: printer/printerdrake.pm:4221 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:4224 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:4225 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to " "share your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:4229 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:4230 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:4232 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:4233 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:4236 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:4237 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:4238 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:4239 #, fuzzy, c-format msgid " - Print head alignment\n" msgstr "செங்குத்து பொருத்தம்" #: printer/printerdrake.pm:4240 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: printer/printerdrake.pm:4255 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:4281 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4324 printer/printerdrake.pm:4351 #: printer/printerdrake.pm:4386 #, c-format msgid "Transfer printer configuration" msgstr "அச்சுபொறியின் வடிவமைப்பு மாற்றப்படுகிறது" #: printer/printerdrake.pm:4325 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: printer/printerdrake.pm:4328 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:4330 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: printer/printerdrake.pm:4332 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: printer/printerdrake.pm:4334 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: printer/printerdrake.pm:4335 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: printer/printerdrake.pm:4336 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: printer/printerdrake.pm:4339 #, c-format msgid "Do not transfer printers" msgstr "அச்சுப்ெபாறிகளை மாற்ற வேண்டாம்" #: printer/printerdrake.pm:4340 printer/printerdrake.pm:4356 #, c-format msgid "Transfer" msgstr "மாற்று" #: printer/printerdrake.pm:4352 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: printer/printerdrake.pm:4373 #, c-format msgid "New printer name" msgstr "புதிய அச்சுப்ெபாறியின் பெயர்" #: printer/printerdrake.pm:4376 #, c-format msgid "Transferring %s..." msgstr "%s... மாற்றப்படுகிறது" #: printer/printerdrake.pm:4387 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4397 #, c-format msgid "Refreshing printer data..." msgstr "அச்சுபொறியின் தரவு மேலேற்றப்படுகிறது..." #: printer/printerdrake.pm:4407 #, c-format msgid "Starting network..." msgstr "வலையமைப்பு துவக்கப்படுகிறது" #: printer/printerdrake.pm:4451 printer/printerdrake.pm:4455 #: printer/printerdrake.pm:4457 #, c-format msgid "Configure the network now" msgstr "வலையமைப்ைப இப்ேபாது வடிவமையுங்கள்" #: printer/printerdrake.pm:4452 #, c-format msgid "Network functionality not configured" msgstr "வலையமைப்பு வடிவமைக்கப்படவில்ைல" #: printer/printerdrake.pm:4453 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" #: printer/printerdrake.pm:4456 #, c-format msgid "Go on without configuring the network" msgstr "வலையமைப்ைப இப்ேபாது வடிவமைக்காமல் ெதாடருங்கள்" #: printer/printerdrake.pm:4487 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4488 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." #: printer/printerdrake.pm:4498 #, c-format msgid "Restarting printing system..." msgstr "அச்சுபொறி மறுதொடக்கம் செய்யப்படுகிறது..." #: printer/printerdrake.pm:4529 #, c-format msgid "high" msgstr "அதிகபட்ச" #: printer/printerdrake.pm:4529 #, c-format msgid "paranoid" msgstr "சந்ேதகப் பேய் " #: printer/printerdrake.pm:4531 #, c-format msgid "Installing a printing system in the %s security level" msgstr "அச்சுப்ெபாறி %s பாதுகாப்பு நிலையில் நிறுவப்படுகிறது" #: printer/printerdrake.pm:4532 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "%s என்ற அச்சுப்ெபாறி %s பாதுகாப்பு நிலையில் இயங்குகிற கணினியில்நிறுவப்படுகிறது.\n" "\n" "இது பாதுகாப்பு பிரச்சினைகளை உருவாக்கும்\n" "நீங்கள் நிச்சயம் அச்சுப்ெபாறியை இயக்க விரும்புகிறீர்களா" #: printer/printerdrake.pm:4568 #, c-format msgid "Starting the printing system at boot time" msgstr "அச்சு ேசவையை துவங்கும்ேபாேத துவக்கு" #: printer/printerdrake.pm:4569 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4592 #, c-format msgid "Checking installed software..." msgstr "நிறுவப்பட்டுள்ள ெமன்ெபாருள் ேசாதிக்கப்படுகிறது...." #: printer/printerdrake.pm:4598 #, c-format msgid "Removing %s..." msgstr "%s நீக்கப்படுகிறது..." #: printer/printerdrake.pm:4602 #, fuzzy, c-format msgid "Could not remove the %s printing system!" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:4626 #, c-format msgid "Installing %s..." msgstr "%s நிறுவப்படுகிறது..." #: printer/printerdrake.pm:4630 #, fuzzy, c-format msgid "Could not install the %s printing system!" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:4698 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4700 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4714 #, fuzzy, c-format msgid "Name or IP of remote server:" msgstr "தொலைவு lpd சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/printerdrake.pm:4734 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "கொடாநிலை அச்சுப்ெபறி" #: printer/printerdrake.pm:4754 #, fuzzy, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "தொலைவு CUPS சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #: printer/printerdrake.pm:4755 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4757 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4758 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4759 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4761 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4762 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4763 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4765 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4769 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:4788 printer/printerdrake.pm:4794 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4783 #, fuzzy, c-format msgid "Local CUPS printing system" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:4822 #, c-format msgid "Select Printer Spooler" msgstr "அச்சுபொறி சாரையை ேதர்ந்ெதடு " #: printer/printerdrake.pm:4823 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "நீங்கள் எந்த அஇயக்க அமைப்புக்கான நுழைவை சேர்க்க போகிறீர்கள்?" #: printer/printerdrake.pm:4872 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "அச்சுப்ெபாறி \"%s\" வடிவமைப்பு ெவற்றியடையவில்ைல" #: printer/printerdrake.pm:4887 #, c-format msgid "Installing Foomatic..." msgstr "Foomatic நிறுவப்படுகிறது...." #: printer/printerdrake.pm:4893 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:5088 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" #: printer/printerdrake.pm:5118 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: printer/printerdrake.pm:5119 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: printer/printerdrake.pm:5130 #, c-format msgid "CUPS configuration" msgstr "CUPS வடிவமைப்பு" #: printer/printerdrake.pm:5151 #, c-format msgid "Change the printing system" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: printer/printerdrake.pm:5160 #, c-format msgid "Normal Mode" msgstr "இயல்பான முறைமை" #: printer/printerdrake.pm:5161 #, c-format msgid "Expert Mode" msgstr "அறிஞர் முறைமை" #: printer/printerdrake.pm:5439 printer/printerdrake.pm:5497 #: printer/printerdrake.pm:5583 printer/printerdrake.pm:5592 #, c-format msgid "Printer options" msgstr "அச்சுபொறி விருப்பத்ேதர்வுகள்" #: printer/printerdrake.pm:5475 #, c-format msgid "Modify printer configuration" msgstr "அச்சுப்ெபாறியை வடிவமைப்பு மாற்றியமைக்க" #: printer/printerdrake.pm:5477 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "அச்சிப்ெபாறி %s%s\n" "நீங்கள் அச்சுப்ெபாறியை மாற்றியைமக்க வேண்டுமா?" #: printer/printerdrake.pm:5482 #, fuzzy, c-format msgid "This printer is disabled" msgstr "இந்த வகிர் மாற்றியமைக்கப்பட முடியாதது" #: printer/printerdrake.pm:5484 #, c-format msgid "Do it!" msgstr "செய்க" #: printer/printerdrake.pm:5489 printer/printerdrake.pm:5551 #, c-format msgid "Printer connection type" msgstr "அச்சுப்ெபாறியின் தொடர்பு வகை: " #: printer/printerdrake.pm:5490 printer/printerdrake.pm:5557 #, c-format msgid "Printer name, description, location" msgstr "அச்சுப்ெபாறியின் பெயர், விவரம், இடம்" #: printer/printerdrake.pm:5492 printer/printerdrake.pm:5576 #, c-format msgid "Printer manufacturer, model, driver" msgstr "அச்சுப்ெபாறியின் தயாரிப்பாளரின் பெயர், மாடல், இயக்க நிரல்" #: printer/printerdrake.pm:5493 printer/printerdrake.pm:5577 #, c-format msgid "Printer manufacturer, model" msgstr "அச்சுப்ெபாறியின் தயாரிப்பாளரின் பெயர், மாடல்" #: printer/printerdrake.pm:5499 printer/printerdrake.pm:5587 #, c-format msgid "Set this printer as the default" msgstr "கொடாநிலை அச்சுப்ெபாறியாக அமை" #: printer/printerdrake.pm:5504 printer/printerdrake.pm:5593 #: printer/printerdrake.pm:5595 printer/printerdrake.pm:5604 #, fuzzy, c-format msgid "Enable Printer" msgstr "சேவையகத்ைத செயல்படுத்து" #: printer/printerdrake.pm:5507 printer/printerdrake.pm:5598 #: printer/printerdrake.pm:5599 printer/printerdrake.pm:5601 #, fuzzy, c-format msgid "Disable Printer" msgstr "சேவையகத்ைத முடமாக்கு" #: printer/printerdrake.pm:5511 printer/printerdrake.pm:5605 #, fuzzy, c-format msgid "Printer communication error handling" msgstr "அச்சுப்ெபாறியின் தொடர்பு வகை: " #: printer/printerdrake.pm:5512 printer/printerdrake.pm:5609 #, c-format msgid "Print test pages" msgstr "சோதனை பக்கங்களை அச்சிடு" #: printer/printerdrake.pm:5513 printer/printerdrake.pm:5611 #, c-format msgid "Learn how to use this printer" msgstr "அச்சுப்ெபாறியை எப்படி பயன்படுத்துவது என்பதை அறிந்துக் ெகாள்" #: printer/printerdrake.pm:5514 printer/printerdrake.pm:5613 #, c-format msgid "Remove printer" msgstr "அச்சுப்ெபாறியை நீக்கு" #: printer/printerdrake.pm:5565 #, c-format msgid "Removing old printer \"%s\"..." msgstr "பழைய அச்சுப்ெபாறி நீக்கப்படுகிறது \"%s\"..." #: printer/printerdrake.pm:5596 #, fuzzy, c-format msgid "Printer \"%s\" is now enabled." msgstr "இணையத் தொடர்பு பரிமாறி செயல்பாட்டில் உள்ளது" #: printer/printerdrake.pm:5602 #, fuzzy, c-format msgid "Printer \"%s\" is now disabled." msgstr "இணையத் தொடர்பு பரிமாறி தற்ேபாது முடமாக்கப்பட்டுள்ளது." #: printer/printerdrake.pm:5644 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "நீங்கள் நிச்சயம் \"%s\" என்ற அச்சுப்ெபாறியை நீக்க வேண்டுமா?" #: printer/printerdrake.pm:5648 #, c-format msgid "Removing printer \"%s\"..." msgstr "அச்சுபொறி நீக்கப்படுகிறது \"%s\"..." #: printer/printerdrake.pm:5672 #, c-format msgid "Default printer" msgstr "கொடாநிலை அச்சுப்ெபாறி" #: printer/printerdrake.pm:5673 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr " \"%s\" கொடாநிலை அச்சுப்ெபாறி" #: raid.pm:41 #, fuzzy, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "வகிர் _formatted_ RAID md%d உடன் சேர்க்க முடியவில்ைல" #: raid.pm:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "%d என்ற RAID நிலைக்கு போதுமான வகிர் இல்ைல\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, fuzzy, c-format msgid "Scannerdrake" msgstr "வருடியை தேர்வுச் செய்யுங்கள்" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: security/help.pm:29 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "தொலைவு அச்சுப்பொறி" #: security/help.pm:31 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "தொலைவு அச்சுப்பொறி" #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, fuzzy, c-format msgid "Security Alerts:" msgstr "பாதுகாப்பு நிலை" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: security/help.pm:108 #, fuzzy, c-format msgid "Set the root umask." msgstr "கடவுச்ெசால் ஏதுமில்ைல" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, fuzzy, c-format msgid "Set the user umask." msgstr "பயனர்கள்" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, fuzzy, c-format msgid "Allow remote root login" msgstr "தொலைவு அச்சுப்பொறி" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "சாதரன மோடம்வழி தொடர்பு" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "சேவைகளை வடிவமையுங்கள்" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, fuzzy, c-format msgid "No password aging for" msgstr "கடவுச்ெசால் ஏதுமில்ைல" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, fuzzy, c-format msgid "Password history length" msgstr "இந்த கடவுச்ெசால் மிக எளிதாக உள்ளது" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, fuzzy, c-format msgid "Root umask" msgstr "கடவுச்ெசால் ஏதுமில்ைல" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, fuzzy, c-format msgid "Shell timeout" msgstr "கரு தொடங்கல் வெளியேற்ற நேரம்" #: security/l10n.pm:44 #, fuzzy, c-format msgid "User umask" msgstr "பயனர்கள்" #: security/l10n.pm:45 #, fuzzy, c-format msgid "Check open ports" msgstr "%s என்ற துறையில் கண்டுபிடிக்கப்பட்டுள்ளது" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "பகைவர்களே வருக" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "மோசமான" #: security/level.pm:13 #, c-format msgid "High" msgstr "உயர்வான" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "மிக உயர்வான" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "சந்ேதகப் பேய்" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "இந்த அமைப்புகளை பயன்படுத்துதல் கூடாது,\n" "முற்றிலும் பாதுகாப்பற்றது. கடவுச்ெசால் கூட கிடையாது\n" "இணையத்திற்கு இப்படியே தொடர்பு கொள்ளக்கூடாது" #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "ஓரளவு பாதுகாப்பானது. கடவுச்ெசால் உடையது\n" "இணையத்திற்கு இப்படியே தொடர்பு கொள்ளக்கூடாது" #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "சரியான பாதுகாப்பானது. கடவுச்ெசால் உடையது\n" "இணையத்திற்கு இப்படியே தொடர்பு கொள்ளலாம்" #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "அதிக பாதுகாப்பானது. தினமும் பல சோதனைகள் நடைபெறும்" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "உங்கள் கணினி தற்ேபாது ஓர் பரிமாறியாக பயன்படக்கூடிய அளவு பாதுகாப்பானது\n" "இது வெளியில் இருந்து வேண்டிகளின் தேவையை ஈடுச் செய்ய முடியும் \n" "உங்கள் கணினி ஒரு சாதரன பயன்பாட்டிற்கு என்றால், இன்னும் சற்று குறைந்த பாதுகாப்பளவை " "பயன்படுத்தலாம்" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "இது சென்ற நிலை போன்றதே. இது முற்றிலும் மூடப்பட்ட ஓர் கணினியாகும்" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "டிரேக்பாதுகாப்பு அடிப்படை விருப்பத்ேதர்வுகள்" #: security/level.pm:57 #, c-format msgid "Please choose the desired security level" msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: security/level.pm:61 #, c-format msgid "Security level" msgstr "பாதுகாப்பு நிலை" #: security/level.pm:63 #, c-format msgid "Use libsafe for servers" msgstr "libsafe என்ற நூலகநிரலை பரிமாறிகளில் பயன்படுத்துங்கள்" #: security/level.pm:64 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "இந்த நூலகநிரலை பயன்படுத்துவதால் பல பாதுகாப்பு பிரச்சினைகளை தவிர்க்க முடியும்" #: security/level.pm:65 #, c-format msgid "Security Administrator (login or email)" msgstr "பாதுகாப்பு மேலாளர்(பெயர் அல்லது மின்னஞ்சல் முகவரி)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "அல்சா ஒலியமைப்பு இயக்கத்ைத துவக்கு" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron தன்னியக்க செயல் மேலாளர்" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "தன்னயக்கமாக கணினி ெதாடங்கும்ேபாது துவங்க ேவண்டிய ேசவைகள்" #: services.pm:127 standalone/draksambashare:105 #, c-format msgid "Printing" msgstr "அச்சு மேலாளர்" #: services.pm:128 #, c-format msgid "Internet" msgstr "இணையம்" #: services.pm:131 #, c-format msgid "File sharing" msgstr "கோப்பு பகிர்தல்" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "தொலைவு மேலாண்மை" #: services.pm:146 #, c-format msgid "Database Server" msgstr "தரவுத்தள வேவையகம்" #: services.pm:209 #, c-format msgid "running" msgstr "இயங்குகிறது" #: services.pm:209 #, c-format msgid "stopped" msgstr "நிறுத்தப்பட்டது" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "சேவைகளும் செயலிகளும்" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "மேல் விவரம் ஏதுமில்ைல\n" "மன்னிக்கவும்" #: services.pm:224 ugtk2.pm:1009 #, c-format msgid "Info" msgstr "தகவல்" #: services.pm:227 #, fuzzy, c-format msgid "Start when requested" msgstr "தொடக்கபட்டி" #: services.pm:227 #, c-format msgid "On boot" msgstr "தொடங்குதலின் போது" #: services.pm:244 #, c-format msgid "Start" msgstr "துவக்கு" #: services.pm:244 #, c-format msgid "Stop" msgstr "நிறுத்து" #: share/advertising/01.pl:3 #, c-format msgid "Mandriva Linux 2006: Packs" msgstr "" #: share/advertising/02.pl:3 #, c-format msgid "Mandriva Linux 2006: More features" msgstr "" #: share/advertising/03.pl:3 #, c-format msgid "Interactive firewall" msgstr "" #: share/advertising/04.pl:3 #, c-format msgid "Desktop search" msgstr "" #: share/advertising/05.pl:3 #, c-format msgid "New package manager" msgstr "" #: share/advertising/06.pl:3 #, c-format msgid "Mandriva Linux 2006: More performances" msgstr "" #: share/advertising/07.pl:3 #, c-format msgid "Latest kernel and GCC" msgstr "" #: share/advertising/08.pl:3 #, c-format msgid "High Availibility" msgstr "" #: share/advertising/09.pl:3 #, c-format msgid "Delta RPM" msgstr "" #: share/advertising/10.pl:3 #, c-format msgid "Low resources setup" msgstr "" #: share/advertising/11.pl:3 #, c-format msgid "Boot time reduction" msgstr "" #: share/advertising/12.pl:3 #, c-format msgid "Mandriva Linux 2006: Easier to use" msgstr "" #: share/advertising/13.pl:3 #, c-format msgid "Latest graphical interfaces: KDE and GNOME" msgstr "" #: share/advertising/14.pl:3 #, c-format msgid "auto-installation servers" msgstr "" #: share/advertising/15.pl:3 #, c-format msgid "Easy and quick installation" msgstr "" #: share/advertising/16.pl:3 #, c-format msgid "Easy configuration thanks to 60 wizards" msgstr "" #: share/advertising/17.pl:3 #, c-format msgid "Look and feel improved" msgstr "" #: share/advertising/18.pl:3 #, c-format msgid "New webmin theme" msgstr "" #: share/advertising/19.pl:3 #, c-format msgid "Mandriva Linux 2006: More support" msgstr "" #: share/advertising/20.pl:3 #, c-format msgid "Better Hardware support" msgstr "" #: share/advertising/21.pl:3 #, c-format msgid "Xen support" msgstr "" #: share/advertising/22.pl:3 #, c-format msgid "Mandriva Linux 2006: More information" msgstr "" #: share/advertising/23.pl:3 #, c-format msgid "Mandriva Linux 2006: Where to buy?" msgstr "" #: share/advertising/24.pl:3 #, c-format msgid "Where to find technical assistance?" msgstr "" #: share/advertising/25.pl:3 #, c-format msgid "How to join the Mandriva Linux community?" msgstr "" #: share/advertising/26.pl:3 #, c-format msgid "How to maintain your system up-to-date?" msgstr "" #: share/advertising/skype.pl:3 #, c-format msgid "Skype lets you make calls through the Internet for free." msgstr "" #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "அலுவல் கருவிகள்" #: share/compssUsers.pl:28 #, fuzzy, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "அலுவல் கருவிகள்(விாிதாள், நிகழ்த்தி,வரைபடக் கருவிகள்)" #: share/compssUsers.pl:29 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "அலுவல் கருவிகள்(விாிதாள், நிகழ்த்தி,வரைபடக் கருவிகள்)" #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "விளையாட்டுகள்" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "விளையாட்டுகள்" #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "பல்லூடக கணினி" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "பல்லூடக இயக்கிகள்/உருவாக்க நிரல்கள்" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "இணையக் கணினி" #: share/compssUsers.pl:45 #, fuzzy, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "நீங்கள் மின்னஞ்சல், மற்றும் இணையத்ைத மேலோட உதவுங்கருவிகள்" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "வலையமைப்புக் கணினி(வேண்டி)" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "ssh முதலிய வலையமைப்புக் கருவிகள்" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "வடிவமைப்புகள்" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "உங்கள் கணினியை எளிதாக வடிவமைக்க உதவுங்கருவிகள்" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "முனையக் கருவிகள்" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "முனையம்,தொகுப்பாளர்கள், கோப்பு மேலாளர்கள் மற்றும் ஓடுகள்" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "C மற்றும் C++ நூலக நிரல்கள்" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "உதவிநூல்" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "புத்தகங்கள் மற்றும் எப்படிச் செய்வது போன்ற உதவி நூல்" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "LSB- லினக்ஸ் தரக்கட்டுப்பாட்டுக்கு தேவையான நிரல்கள்." #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "" #: share/compssUsers.pl:89 #, fuzzy, c-format msgid "Groupware" msgstr "கிரப்" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "கோலாப் சேவகன்" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "நெருப்புச்சுவர்/வழிப்படுத்தி" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "இணைய நுழைவாயில்" #: share/compssUsers.pl:97 #, fuzzy, c-format msgid "Mail/News" msgstr "/கோப்பு/_புதியது" #: share/compssUsers.pl:98 #, fuzzy, c-format msgid "Postfix mail server, Inn news server" msgstr "மின்னஞ்சல் பரிமாறி" #: share/compssUsers.pl:101 #, fuzzy, c-format msgid "Directory Server" msgstr "RAID இருந்து நீக்கு" #: share/compssUsers.pl:105 #, fuzzy, c-format msgid "FTP Server" msgstr "NTP சேவையகம்" #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:109 #, fuzzy, c-format msgid "DNS/NIS" msgstr "DNS/NIS " #: share/compssUsers.pl:110 #, c-format msgid "Domain Name and Network Information Server" msgstr "DNS/NIS" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "அச்சுப்ெபாறி சேவையகம்" #: share/compssUsers.pl:114 #, fuzzy, c-format msgid "NFS Server, Samba server" msgstr "ஒலிப் பரிமாறி" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "தரவுதளங்கள்" #: share/compssUsers.pl:118 #, fuzzy, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL/MySQL தரவுத்தள பரிமாறிகள்" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "இணையதள/கோப்புப் பாிமாற்றம்" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "அப்பாச்சி, ftpd போன்ற பரிமாற்று நிரல்கள்" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "மின்னஞ்சல்" #: share/compssUsers.pl:127 #, fuzzy, c-format msgid "Postfix mail server" msgstr "மின்னஞ்சல் பரிமாறி" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL/MySQL தரவுத்தள பரிமாறிகள்" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "வலையமைப்பக பரிமாறி" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS /சம்பா/பினாமி/ssh பரிமாறிகள்" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "Kசாளரமைப்பு பணிக்கணினி" #: share/compssUsers.pl:148 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "Kசாளரமைப்பு- ஓர் பயன்படுத்துவதற்கு எளிதான வரைவியல்வழி மேலாளர்" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "குேனாம் பணிக்கணினி" #: share/compssUsers.pl:153 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "ஓர் பயன்படுத்துவதற்கு எளிதான வரைவியல்வழி மேலாளர்" #: share/compssUsers.pl:156 #, fuzzy, c-format msgid "IceWm Desktop" msgstr "மேசைசெயலி" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "மற்ற வரைவியல்வழி மேலாளர்கள்" #: share/compssUsers.pl:161 #, fuzzy, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "குேனாம், ஐஸ்விம் ஆகிய பயன்படுத்துவதற்கு எளிதான வரைவியல்வழி மேலாளர்கள்" #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "உதவிக்கருவிகள்" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384 #, fuzzy, c-format msgid "SSH Server" msgstr "சேவையகம்" #: share/compssUsers.pl:191 #, fuzzy, c-format msgid "Webmin" msgstr "வலைபடக் கருவி" #: share/compssUsers.pl:192 #, fuzzy, c-format msgid "Webmin Remote Configuration Server" msgstr "பரிமாறி வடிவமைப்பு" #: share/compssUsers.pl:196 #, fuzzy, c-format msgid "Network Utilities/Monitoring" msgstr "வலையமைப்பாக்க வடிவமைப்பு " #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:201 #, fuzzy, c-format msgid "Mandriva Wizards" msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #: share/compssUsers.pl:202 #, fuzzy, c-format msgid "Wizards to configure server" msgstr "அச்சுப்ெபாறி \"%s\" வடிவமைப்பு ெவற்றியடையவில்ைல" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[விசைப்பலகை]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: standalone/XFdrake:59 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "நீங்கள் செய்த மாற்றங்கள் வேலை செய்ய மறு தொடக்கம் தேவை" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:102 standalone/drakTermServ:108 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:119 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:125 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:207 standalone/drakTermServ:210 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "பரிமாறி வடிவமைப்பு" #: standalone/drakTermServ:216 #, fuzzy, c-format msgid "dhcpd Config" msgstr "dhcpd வடிவமைக்கப்பு" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "சேவையகத்ைத செயல்படுத்து" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "சேவையகத்ைத முடமாக்கு" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "சேவையகத்ைத துவக்கு" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "சேவையகத்ைத நிறுத்து" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "பயனரைச் சேர்/நீக்கு" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "வேண்டிகளை சேர்/நீக்கு" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "உருவங்கள்" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "டிரேக்பதிவு " #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:379 #, c-format msgid "Cancel Wizard" msgstr "வழிகாட்டியை ரத்து செய்" #: standalone/drakTermServ:394 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:422 #, fuzzy, c-format msgid "Use thin clients." msgstr "வேண்டிகளை சேர்/நீக்கு" #: standalone/drakTermServ:424 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:426 #, c-format msgid "" "Please select default client type (Fat is the default type if 'Use thin' is " "unchecked).\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:446 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:447 standalone/drakTermServ:769 #: standalone/drakTermServ:785 #, c-format msgid "This will take a few minutes." msgstr "தயவுசெய்து காத்திருக்கவும்." #: standalone/drakTermServ:453 standalone/drakTermServ:493 #, fuzzy, c-format msgid "Done!" msgstr "முடிந்தது" #: standalone/drakTermServ:464 standalone/drakTermServ:849 #, c-format msgid "%s failed" msgstr "" #: standalone/drakTermServ:473 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" #: standalone/drakTermServ:479 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:499 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:534 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "பரிமாறி வடிவமைப்பு" #: standalone/drakTermServ:535 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:541 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:559 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:579 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:591 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:595 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:600 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:609 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:630 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" #: standalone/drakTermServ:663 #, c-format msgid "Boot Floppy" msgstr "துவங்கல் வட்டு" #: standalone/drakTermServ:665 #, c-format msgid "Boot ISO" msgstr "துவங்கல் ISO" #: standalone/drakTermServ:667 #, fuzzy, c-format msgid "PXE Image" msgstr "உருவம்" #: standalone/drakTermServ:728 #, fuzzy, c-format msgid "Default kernel version" msgstr "கரு வெளியீடு" #: standalone/drakTermServ:731 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:757 #, c-format msgid "Install i586 kernel for older clients" msgstr "" #: standalone/drakTermServ:767 #, c-format msgid "Build Whole Kernel -->" msgstr "முழு கருவையையும் உருவாக்கு -->" #: standalone/drakTermServ:774 #, c-format msgid "No kernel selected!" msgstr "கரு தேர்வு செய்யப்படவில்ைல" #: standalone/drakTermServ:777 #, c-format msgid "Build Single NIC -->" msgstr "ஒரு வலையமைப்பு அட்ைடயை மட்டும் உருவாக்கு -->" #: standalone/drakTermServ:781 #, fuzzy, c-format msgid "No NIC selected!" msgstr "வலையமைப்பு அட்ைட தேர்வு செய்யப்படவில்ைல" #: standalone/drakTermServ:784 #, c-format msgid "Build All Kernels -->" msgstr "அனைத்து கருவையையும் உருவாக்கு -->" #: standalone/drakTermServ:797 #, c-format msgid "<-- Delete" msgstr "<-- நீக்கு" #: standalone/drakTermServ:802 #, fuzzy, c-format msgid "No image selected!" msgstr "வலையமைப்பு அட்ைட தேர்வு செய்யப்படவில்ைல" #: standalone/drakTermServ:805 #, c-format msgid "Delete All NBIs" msgstr "NBIs அனைத்ைதயும் நீக்கு" #: standalone/drakTermServ:880 #, c-format msgid "Building images for kernel:" msgstr "" #: standalone/drakTermServ:1004 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:1009 #, c-format msgid "Add User -->" msgstr "பயனரைச் சேர் -->" #: standalone/drakTermServ:1015 #, c-format msgid "<-- Del User" msgstr "<-- பயனரை நீக்கு" #: standalone/drakTermServ:1051 #, fuzzy, c-format msgid "type: %s" msgstr "வகை: " #: standalone/drakTermServ:1055 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:1086 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "தானியக்க வடிவமைப்பு" #: standalone/drakTermServ:1095 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1114 #, fuzzy, c-format msgid "Thin Client" msgstr "DHCP வேண்டி" #: standalone/drakTermServ:1118 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "வேண்டிகளை சேர்/நீக்கு" #: standalone/drakTermServ:1119 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1120 #, c-format msgid "Add Client -->" msgstr "வேண்டியை சேர் -->" #: standalone/drakTermServ:1134 #, fuzzy, c-format msgid "type: fat" msgstr "வகை: " #: standalone/drakTermServ:1135 #, fuzzy, c-format msgid "type: thin" msgstr "வகை: " #: standalone/drakTermServ:1142 #, fuzzy, c-format msgid "local config: false" msgstr "உள்ளமை கோப்புகள்" #: standalone/drakTermServ:1143 #, fuzzy, c-format msgid "local config: true" msgstr "வடிவமைக்கப்படவில்ைல" #: standalone/drakTermServ:1151 #, fuzzy, c-format msgid "<-- Edit Client" msgstr "<-- வேண்டியை நீக்கு" #: standalone/drakTermServ:1176 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1183 #, fuzzy, c-format msgid "Delete Client" msgstr "<-- வேண்டியை நீக்கு" #: standalone/drakTermServ:1205 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1250 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1266 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1300 #, c-format msgid "Subnet:" msgstr "கீழ் இணையம்" #: standalone/drakTermServ:1307 #, c-format msgid "Netmask:" msgstr "Netmask:" #: standalone/drakTermServ:1314 #, c-format msgid "Routers:" msgstr "" #: standalone/drakTermServ:1321 #, c-format msgid "Subnet Mask:" msgstr "துணை இணைய மறைப்பு:" #: standalone/drakTermServ:1328 #, c-format msgid "Broadcast Address:" msgstr "" #: standalone/drakTermServ:1335 #, c-format msgid "Domain Name:" msgstr "களப் பெயர்:" #: standalone/drakTermServ:1343 #, fuzzy, c-format msgid "Name Servers:" msgstr "ஒலிப் பரிமாறி" #: standalone/drakTermServ:1354 #, c-format msgid "IP Range Start:" msgstr "" #: standalone/drakTermServ:1355 #, c-format msgid "IP Range End:" msgstr "" #: standalone/drakTermServ:1397 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1399 #, fuzzy, c-format msgid "Write Config" msgstr "வடிவமைப்பு" #: standalone/drakTermServ:1415 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "வலையமைப்பாக்க வடிவமைப்பு" #: standalone/drakTermServ:1416 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1419 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" #: standalone/drakTermServ:1572 #, c-format msgid "Write to %s failed!" msgstr "" #: standalone/drakTermServ:1584 #, c-format msgid "Please insert floppy disk:" msgstr "" #: standalone/drakTermServ:1588 #, c-format msgid "Could not access the floppy!" msgstr "" #: standalone/drakTermServ:1590 #, c-format msgid "Floppy can be removed now" msgstr "" #: standalone/drakTermServ:1593 #, c-format msgid "No floppy drive available!" msgstr "" #: standalone/drakTermServ:1599 #, c-format msgid "PXE image is %s/%s" msgstr "" #: standalone/drakTermServ:1601 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "%s என்ற ேகாப்ைப எழுதுவதில் பிைழ" #: standalone/drakTermServ:1611 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1613 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1634 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr " /etc/dhcpd.conf என்ற கோப்பு முதலில் உருவாக்கப்படவேண்டும்" #: standalone/drakTermServ:1793 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1806 #, c-format msgid "%s is not a user..\n" msgstr "" #: standalone/drakTermServ:1807 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1809 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1811 #, c-format msgid "%s added to Terminal Server\n" msgstr "" #: standalone/drakTermServ:1828 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr " %s கண்டுபிடிக்கப்பட்டது" #: standalone/drakTermServ:1830 standalone/drakTermServ:1903 #, c-format msgid "%s not found...\n" msgstr "" #: standalone/drakTermServ:1931 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: standalone/drakTermServ:2071 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 standalone/drakhosts:123 #: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105 #: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539 #: standalone/draknfs:546 standalone/draksambashare:181 #: standalone/draksambashare:202 standalone/draksambashare:625 #: standalone/draksambashare:792 #, c-format msgid "Error!" msgstr "பிழை!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr " `%s என்ற கோப்ேபா கண்டுபிடிக்க முடியவில்ைல" #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "தாநிறுவலுக்கான வடிவமைப்பாளர்" #: standalone/drakautoinst:42 #, fuzzy, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "தாநிறுவலுக்கான வடிவமைப்பு. இது வித்தகருக்கு மட்டுமே தேவைப்படும். நீங்கள் தொடர " "விரும்புகிறீர்களா?" #: standalone/drakautoinst:60 #, fuzzy, c-format msgid "replay" msgstr "மறு இயக்கம்" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "கைம்முறை" #: standalone/drakautoinst:64 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "தானியக்க வடிவமைப்பு" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "ஒவ்வொரு நிலையிலும் இப்ேபாது நிறுவிய விதமே நிறுவ வேண்டுமா, அல்லது கைமுறையாக நிறுவ " "வேண்டுமா" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "தாநிறுவலுக்கான துவக்க வட்டு உருவாக்கப்படுகிறது" #: standalone/drakautoinst:90 #, fuzzy, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "வெற்று நெகிழ்வட்ைட %s இயக்கியில் உள்ளிடவும்" #: standalone/drakautoinst:91 #, fuzzy, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "தாநிறுவலுக்கான துவக்க வட்டு உருவாக்கப்படுகிறது" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "வருக\n" "\n" "தாநிறுவலுக்கான அளபுருக்கள் இடபுறத்தில் உள்ளது" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "தாநிறுவல்" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "உருப்படியை சேர்" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "கடைசி உருப்படியை நீக்கு" #: standalone/drakbackup:153 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:158 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "This should be the return address that you want the backup results sent " "from. Default is drakbackup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:163 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:164 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:327 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:331 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:378 #, fuzzy, c-format msgid "Interval cron not available as non-root" msgstr "Cron நிர்வாகியாகமல் இயங்காது" #: standalone/drakbackup:465 standalone/logdrake:440 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:469 standalone/logdrake:445 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:478 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:480 #, fuzzy, c-format msgid "Old user list:\n" msgstr "பயனர் பாந்தம்" #: standalone/drakbackup:482 #, fuzzy, c-format msgid "New user list:\n" msgstr "பயனர் பாந்தம்" #: standalone/drakbackup:511 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: standalone/drakbackup:512 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: standalone/drakbackup:518 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: standalone/drakbackup:543 standalone/drakbackup:614 #: standalone/drakbackup:670 #, fuzzy, c-format msgid "Total progress" msgstr "சோதனை பக்கங்கள்" #: standalone/drakbackup:596 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:605 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:612 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "இதை திறக்க முடியவில்ைல%s: %s\n" #: standalone/drakbackup:629 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:630 #, fuzzy, c-format msgid "Bad password on %s" msgstr "கடவுச்ெசால் ஏதுமில்ைல" #: standalone/drakbackup:631 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:632 #, fuzzy, c-format msgid "Can not find %s on %s" msgstr "இதை திறக்க முடியவில்ைல%s: %s\n" #: standalone/drakbackup:636 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:640 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:690 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: standalone/drakbackup:694 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: standalone/drakbackup:699 #, c-format msgid "Not erasable media!" msgstr "" #: standalone/drakbackup:741 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:799 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:826 #, c-format msgid "No tape in %s!" msgstr "" #: standalone/drakbackup:935 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:954 standalone/drakbackup:986 #, c-format msgid "Backup system files..." msgstr "" #: standalone/drakbackup:987 standalone/drakbackup:1027 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: standalone/drakbackup:1026 #, c-format msgid "Backup User files..." msgstr "" #: standalone/drakbackup:1060 #, c-format msgid "Backup Other files..." msgstr "" #: standalone/drakbackup:1061 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: standalone/drakbackup:1066 #, c-format msgid "No changes to backup!" msgstr "" #: standalone/drakbackup:1083 standalone/drakbackup:1106 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: standalone/drakbackup:1092 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: standalone/drakbackup:1093 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" #: standalone/drakbackup:1095 #, c-format msgid "file list sent by FTP: %s\n" msgstr "" #: standalone/drakbackup:1111 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1116 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1125 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1126 #, c-format msgid " Error while sending mail. \n" msgstr "" #: standalone/drakbackup:1156 #, c-format msgid "Can not create catalog!" msgstr "" #: standalone/drakbackup:1397 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: standalone/drakbackup:1398 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: standalone/drakbackup:1399 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: standalone/drakbackup:1400 standalone/drakbackup:1464 #: standalone/drakbackup:1530 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1402 standalone/drakbackup:1466 #: standalone/drakbackup:1532 #, c-format msgid "Use Incremental Backups" msgstr "" #: standalone/drakbackup:1402 standalone/drakbackup:1466 #: standalone/drakbackup:1532 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1404 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: standalone/drakbackup:1405 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: standalone/drakbackup:1436 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: standalone/drakbackup:1463 #, c-format msgid "Do not include the browser cache" msgstr "" #: standalone/drakbackup:1517 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: standalone/drakbackup:1518 standalone/drakfont:656 #, fuzzy, c-format msgid "Remove Selected" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/drakbackup:1581 #, c-format msgid "Users" msgstr "பயனர்கள்" #: standalone/drakbackup:1601 #, c-format msgid "Use network connection to backup" msgstr "" #: standalone/drakbackup:1603 #, c-format msgid "Net Method:" msgstr "" #: standalone/drakbackup:1607 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1608 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1610 #, fuzzy, c-format msgid "Transfer Now" msgstr "மாற்று" #: standalone/drakbackup:1612 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1615 #, fuzzy, c-format msgid "Host name or IP." msgstr "கணினிப்ெபயர்: " #: standalone/drakbackup:1620 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1632 #, c-format msgid "Remember this password" msgstr "" #: standalone/drakbackup:1648 #, c-format msgid "Need hostname, username and password!" msgstr "" #: standalone/drakbackup:1739 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: standalone/drakbackup:1742 #, fuzzy, c-format msgid "Choose your CD/DVD device" msgstr "தயவுசெய்து உங்கள் விசைப்பலகை இட அமைவைத் தேர்வு செய்க" #: standalone/drakbackup:1747 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "தயவுசெய்து உங்கள் விசைப்பலகை இட அமைவைத் தேர்வு செய்க" #: standalone/drakbackup:1754 #, c-format msgid "Multisession CD" msgstr "பலப்பகுதிகள் CD" #: standalone/drakbackup:1756 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1762 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: standalone/drakbackup:1763 #, c-format msgid " Erase Now " msgstr "" #: standalone/drakbackup:1769 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1771 #, fuzzy, c-format msgid "DVD-R media" msgstr "சாதனம்" #: standalone/drakbackup:1773 #, fuzzy, c-format msgid "DVDRAM device" msgstr "சாதனம்" #: standalone/drakbackup:1804 #, c-format msgid "No CD device defined!" msgstr "" #: standalone/drakbackup:1846 #, c-format msgid "Use tape to backup" msgstr "" #: standalone/drakbackup:1849 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1855 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1861 #, c-format msgid "Use tape hardware compression (EXPERIMENTAL)" msgstr "" #: standalone/drakbackup:1867 #, c-format msgid "Do not rewind tape after backup" msgstr "" #: standalone/drakbackup:1873 #, c-format msgid "Erase tape before backup" msgstr "" #: standalone/drakbackup:1879 #, c-format msgid "Eject tape after the backup" msgstr "" #: standalone/drakbackup:1960 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: standalone/drakbackup:1964 #, fuzzy, c-format msgid "Directory to save to" msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: standalone/drakbackup:1969 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" #: standalone/drakbackup:1973 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" #: standalone/drakbackup:2040 #, c-format msgid "CD-R / DVD-R" msgstr "" #: standalone/drakbackup:2045 #, c-format msgid "HardDrive / NFS" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2061 #: standalone/drakbackup:2066 #, c-format msgid "hourly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2062 #: standalone/drakbackup:2067 #, fuzzy, c-format msgid "daily" msgstr "மின்னஞ்சல்" #: standalone/drakbackup:2060 standalone/drakbackup:2063 #: standalone/drakbackup:2068 #, c-format msgid "weekly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2064 #: standalone/drakbackup:2069 #, c-format msgid "monthly" msgstr "" #: standalone/drakbackup:2060 standalone/drakbackup:2065 #: standalone/drakbackup:2070 #, c-format msgid "custom" msgstr "தனிப்பயன்" #: standalone/drakbackup:2074 #, c-format msgid "January" msgstr "ஜனவரி" #: standalone/drakbackup:2074 #, c-format msgid "February" msgstr "பெப்ரவரி" #: standalone/drakbackup:2074 #, c-format msgid "March" msgstr "மார்ச்" #: standalone/drakbackup:2075 #, c-format msgid "April" msgstr "ஏப்ரல்" #: standalone/drakbackup:2075 #, c-format msgid "May" msgstr "மே" #: standalone/drakbackup:2075 #, c-format msgid "June" msgstr "ஜூன்" #: standalone/drakbackup:2075 #, c-format msgid "July" msgstr "ஜூலை" #: standalone/drakbackup:2075 #, c-format msgid "August" msgstr "ஆகஸ்ட்" #: standalone/drakbackup:2075 #, c-format msgid "September" msgstr "செப்டம்பர்" #: standalone/drakbackup:2076 #, c-format msgid "October" msgstr "அக்டோபர்" #: standalone/drakbackup:2076 #, c-format msgid "November" msgstr "நவம்பர்" #: standalone/drakbackup:2076 #, c-format msgid "December" msgstr "டிசம்பர்r" #: standalone/drakbackup:2079 #, c-format msgid "Sunday" msgstr "ஞாயிறு" #: standalone/drakbackup:2079 #, c-format msgid "Monday" msgstr "திங்கள்" #: standalone/drakbackup:2079 #, c-format msgid "Tuesday" msgstr "செவ்வாய்" #: standalone/drakbackup:2080 #, c-format msgid "Wednesday" msgstr "புதன்" #: standalone/drakbackup:2080 #, c-format msgid "Thursday" msgstr "வியாழன்" #: standalone/drakbackup:2080 #, c-format msgid "Friday" msgstr "வெள்ளி" #: standalone/drakbackup:2080 #, c-format msgid "Saturday" msgstr "சனி" #: standalone/drakbackup:2112 #, fuzzy, c-format msgid "Use daemon" msgstr "டிரேக்பயனர்" #: standalone/drakbackup:2116 #, fuzzy, c-format msgid "Please choose the time interval between each backup" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:2122 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2127 #, c-format msgid "Minute" msgstr "நிமிடம்" #: standalone/drakbackup:2131 #, c-format msgid "Hour" msgstr "மணி நேரம்" #: standalone/drakbackup:2135 #, c-format msgid "Day" msgstr "நாள்" #: standalone/drakbackup:2139 #, c-format msgid "Month" msgstr "மாதம்" #: standalone/drakbackup:2143 #, fuzzy, c-format msgid "Weekday" msgstr "புதன்" #: standalone/drakbackup:2149 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:2155 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: standalone/drakbackup:2156 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2157 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2204 #, fuzzy, c-format msgid "Please choose the compression type" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:2208 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "பிழையான காப்பு ேகாப்பு" #: standalone/drakbackup:2210 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2216 #, c-format msgid "Return address for sent mail:" msgstr "" #: standalone/drakbackup:2222 #, fuzzy, c-format msgid "SMTP server for mail:" msgstr "சம்பா சேவையகம்" #: standalone/drakbackup:2227 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2270 #, c-format msgid "What" msgstr "என்ன" #: standalone/drakbackup:2275 #, fuzzy, c-format msgid "Where" msgstr "இதெரெப்" #: standalone/drakbackup:2280 #, fuzzy, c-format msgid "When" msgstr "கோதுமைநிறம்" #: standalone/drakbackup:2285 #, fuzzy, c-format msgid "More Options" msgstr "விருப்பத்ேதர்வுகள்" #: standalone/drakbackup:2298 #, fuzzy, c-format msgid "Backup destination not configured..." msgstr "வலையமைப்பு வடிவமைக்கப்படவில்ைல" #: standalone/drakbackup:2318 standalone/drakbackup:4242 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "சம்பா வடிவமைப்பு" #: standalone/drakbackup:2334 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:2337 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2337 #, fuzzy, c-format msgid "Across Network" msgstr "வலையமைப்பு" #: standalone/drakbackup:2337 #, fuzzy, c-format msgid "On CD-R" msgstr "சிடிஏற்றம்/இறக்கம்" #: standalone/drakbackup:2337 #, c-format msgid "On Tape Device" msgstr "" #: standalone/drakbackup:2383 #, fuzzy, c-format msgid "Backup Users" msgstr "காப்ெபடுத்தல்" #: standalone/drakbackup:2384 #, fuzzy, c-format msgid " (Default is all users)" msgstr "கொடாநிலை அச்சுப்ெபாறி" #: standalone/drakbackup:2397 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "நீங்கள் பயன்படுத்த விரும்பும் மொழியைத் தேர்வுச் செய்யவும்" #: standalone/drakbackup:2398 #, fuzzy, c-format msgid "Backup System" msgstr "காப்ெபடுத்தல்" #: standalone/drakbackup:2400 #, fuzzy, c-format msgid "Select user manually" msgstr "கைநூலில் தேடு" #: standalone/drakbackup:2429 #, c-format msgid "Please select data to backup..." msgstr "" #: standalone/drakbackup:2501 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: standalone/drakbackup:2502 #, fuzzy, c-format msgid "" "\n" "- System Files:\n" msgstr "சாளர பாந்தம்" #: standalone/drakbackup:2504 #, fuzzy, c-format msgid "" "\n" "- User Files:\n" msgstr "பயனர் பாந்தம்" #: standalone/drakbackup:2506 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: standalone/drakbackup:2509 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2510 #, c-format msgid "\tDelete backups older than %s day(s)\n" msgstr "" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: standalone/drakbackup:2518 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: standalone/drakbackup:2519 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2520 #, fuzzy, c-format msgid " on device: %s" msgstr "எலியின் வகை: %s\n" #: standalone/drakbackup:2521 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2522 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: standalone/drakbackup:2523 #, c-format msgid "\t\tErase=%s" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2527 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: standalone/drakbackup:2528 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: standalone/drakbackup:2529 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "விருப்பத்ேதர்வுகள்" #: standalone/drakbackup:2530 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: standalone/drakbackup:2532 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: standalone/drakbackup:2533 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: standalone/drakbackup:2534 #, c-format msgid "\tBackups use tar only\n" msgstr "" #: standalone/drakbackup:2536 #, fuzzy, c-format msgid "\tUse .backupignore files\n" msgstr "பிழையான காப்பு ேகாப்பு" #: standalone/drakbackup:2537 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: standalone/drakbackup:2538 #, c-format msgid "\tSend mail from %s\n" msgstr "" #: standalone/drakbackup:2539 #, fuzzy, c-format msgid "\tUsing SMTP server %s\n" msgstr "\"%s\" கப்ஸ் ேசவையகத்தில் உள்ளது" #: standalone/drakbackup:2541 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2542 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: standalone/drakbackup:2543 #, c-format msgid "\t-CD-R.\n" msgstr "" #: standalone/drakbackup:2544 #, c-format msgid "\t-Tape \n" msgstr "" #: standalone/drakbackup:2545 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: standalone/drakbackup:2546 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: standalone/drakbackup:2549 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: standalone/drakbackup:2554 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: standalone/drakbackup:2556 #, fuzzy, c-format msgid "- Restore System Files.\n" msgstr "சாளர பாந்தம்" #: standalone/drakbackup:2558 standalone/drakbackup:2568 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2561 #, fuzzy, c-format msgid "- Restore User Files: \n" msgstr "பயனர் பாந்தம்" #: standalone/drakbackup:2566 #, fuzzy, c-format msgid "- Restore Other Files: \n" msgstr "மறுதொடக்கம்" #: standalone/drakbackup:2745 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: standalone/drakbackup:2747 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: standalone/drakbackup:2757 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2778 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2779 #, c-format msgid " Successfully Restored on %s " msgstr "" #: standalone/drakbackup:2899 #, c-format msgid " Restore Configuration " msgstr "" #: standalone/drakbackup:2927 #, c-format msgid "OK to restore the other files." msgstr "" #: standalone/drakbackup:2943 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:3008 #, fuzzy, c-format msgid "Please choose the date to restore:" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:3045 #, c-format msgid "Restore from Hard Disk." msgstr "" #: standalone/drakbackup:3047 #, c-format msgid "Enter the directory where backups are stored" msgstr "" #: standalone/drakbackup:3051 #, c-format msgid "Directory with backups" msgstr "" #: standalone/drakbackup:3105 #, c-format msgid "Select another media to restore from" msgstr "" #: standalone/drakbackup:3107 #, fuzzy, c-format msgid "Other Media" msgstr "எதிரியல்" #: standalone/drakbackup:3112 #, fuzzy, c-format msgid "Restore system" msgstr "இயக்கத்ைத நிறுவுங்கள்" #: standalone/drakbackup:3113 #, c-format msgid "Restore Users" msgstr "" #: standalone/drakbackup:3114 #, fuzzy, c-format msgid "Restore Other" msgstr "மறுதொடக்கம்" #: standalone/drakbackup:3116 #, c-format msgid "Select path to restore (instead of /)" msgstr "" #: standalone/drakbackup:3120 standalone/drakbackup:3402 #, fuzzy, c-format msgid "Path To Restore To" msgstr "தனிப்பயனாக்கு" #: standalone/drakbackup:3123 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3125 #, c-format msgid "Remove user directories before restore." msgstr "" #: standalone/drakbackup:3210 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3213 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3231 #, fuzzy, c-format msgid "No matches found..." msgstr "லிலோ தகவலை காண முடியவில்ைல" #: standalone/drakbackup:3235 #, fuzzy, c-format msgid "Restore Selected" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/drakbackup:3370 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3376 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3385 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/drakbackup:3462 #, fuzzy, c-format msgid "Backup files not found at %s." msgstr "%s என்பதை %s.old என காப்ெபடு" #: standalone/drakbackup:3475 #, fuzzy, c-format msgid "Restore From CD" msgstr "RAID இருந்து நீக்கு" #: standalone/drakbackup:3475 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3477 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3487 #, fuzzy, c-format msgid "Restore From Tape" msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்" #: standalone/drakbackup:3487 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3489 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3500 #, fuzzy, c-format msgid "Restore Via Network" msgstr "மறுதொடக்கம்" #: standalone/drakbackup:3500 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: standalone/drakbackup:3501 #, c-format msgid "Host Name" msgstr "புரவன் பெயர்" #: standalone/drakbackup:3502 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3509 #, fuzzy, c-format msgid "Password required" msgstr "கடவுச்ெசால்" #: standalone/drakbackup:3515 #, fuzzy, c-format msgid "Username required" msgstr "பயனர்ெபயர்" #: standalone/drakbackup:3518 #, fuzzy, c-format msgid "Hostname required" msgstr "கணினியின்பெயர்: " #: standalone/drakbackup:3523 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3536 #, c-format msgid "Files Restored..." msgstr "" #: standalone/drakbackup:3539 #, fuzzy, c-format msgid "Restore Failed..." msgstr "மறுதொடக்கம்" #: standalone/drakbackup:3557 #, c-format msgid "%s not retrieved..." msgstr "" #: standalone/drakbackup:3778 standalone/drakbackup:3847 #, fuzzy, c-format msgid "Search for files to restore" msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakbackup:3782 #, c-format msgid "Restore all backups" msgstr "" #: standalone/drakbackup:3790 #, fuzzy, c-format msgid "Custom Restore" msgstr "தனிப்பயனாக்கு" #: standalone/drakbackup:3794 standalone/drakbackup:3843 #, fuzzy, c-format msgid "Restore From Catalog" msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்" #: standalone/drakbackup:3815 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "லிலோ தகவலை காப்ெபாடுக்க முடியவில்ைல" #: standalone/drakbackup:3816 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "இந்த அைமப்பு சரியா?" #: standalone/drakbackup:3817 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3819 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3835 #, c-format msgid "CD in place - continue." msgstr "" #: standalone/drakbackup:3840 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3841 #, fuzzy, c-format msgid "Directory To Restore From" msgstr "RAID இருந்து நீக்கு" #: standalone/drakbackup:3877 #, fuzzy, c-format msgid "Restore Progress" msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்" #: standalone/drakbackup:3988 #, fuzzy, c-format msgid "Build Backup" msgstr "காப்ெபடுத்தல்" #: standalone/drakbackup:4021 standalone/drakbackup:4341 #, c-format msgid "Restore" msgstr "மீளச்செய்" #: standalone/drakbackup:4136 #, c-format msgid "Please select data to restore..." msgstr "" #: standalone/drakbackup:4176 #, c-format msgid "Backup system files" msgstr "" #: standalone/drakbackup:4179 #, c-format msgid "Backup user files" msgstr "" #: standalone/drakbackup:4182 #, c-format msgid "Backup other files" msgstr "" #: standalone/drakbackup:4185 standalone/drakbackup:4219 #, c-format msgid "Total Progress" msgstr "" #: standalone/drakbackup:4211 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "கோப்புகளைக் கண்டுபிடி " #: standalone/drakbackup:4214 #, fuzzy, c-format msgid "Sending files..." msgstr "கோப்புகளைக் கண்டுபிடி " #: standalone/drakbackup:4284 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "விரைவு வெட்டி,நகலெடுக்குஞ் செருகி வடிவமைப்பான்" #: standalone/drakbackup:4289 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "kதொடர்பு வடிவமைப்பு" #: standalone/drakbackup:4315 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "மிடி வடிவமைப்பு" #: standalone/drakbackup:4320 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "வலையமைப்பாக்க வடிவமைப்பு" #: standalone/drakbackup:4325 #, fuzzy, c-format msgid "View Configuration" msgstr "வடிவமைப்புகள்" #: standalone/drakbackup:4329 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4334 #, fuzzy, c-format msgid "Backup Now" msgstr "காப்ெபடுத்தல்" #: standalone/drakbackup:4338 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4358 standalone/drakbackup:4361 #, fuzzy, c-format msgid "Drakbackup" msgstr "காப்ெபடுத்தல்" #: standalone/drakboot:49 #, c-format msgid "No bootloader found, creating a new configuration" msgstr "" #: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191 #: standalone/harddrake2:192 standalone/logdrake:69 #: standalone/printerdrake:150 standalone/printerdrake:151 #: standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "/_கோப்பு" #: standalone/drakboot:85 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "/கோப்பு/_வெளிச்ெசல்" #: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75 #: standalone/printerdrake:152 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:125 #, c-format msgid "Text only" msgstr "" #: standalone/drakboot:126 #, c-format msgid "Verbose" msgstr "விளக்கமான" #: standalone/drakboot:127 #, c-format msgid "Silent" msgstr "அமைதி" #: standalone/drakboot:134 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:135 #, fuzzy, c-format msgid "Do you want to configure it now?" msgstr "உங்கள் வடிவமைப்ைப சோதித்து பார்க்க வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]" #: standalone/drakboot:144 #, c-format msgid "Install themes" msgstr "உருகருக்களை நிறுவுங்கள்" #: standalone/drakboot:146 #, fuzzy, c-format msgid "Graphical boot theme selection" msgstr "அச்சுபொறியின் மாடலை தேர்வு" #: standalone/drakboot:149 #, fuzzy, c-format msgid "Graphical boot mode:" msgstr "அச்சுபொறியின் மாடலை தேர்வு" #: standalone/drakboot:151 #, c-format msgid "Theme" msgstr "உருகரு" #: standalone/drakboot:154 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "உருகருக்களை முனையத்தில்\n" "காட்டு" #: standalone/drakboot:159 #, c-format msgid "Create new theme" msgstr "உருகரு ஒன்றை உருவாக்கு " #: standalone/drakboot:191 #, fuzzy, c-format msgid "Default user" msgstr "கொடாநிலை அச்சுப்ெபாறி" #: standalone/drakboot:192 #, fuzzy, c-format msgid "Default desktop" msgstr "மேசை" #: standalone/drakboot:195 #, c-format msgid "No, I do not want autologin" msgstr "இல்ைல, எனக்கு தன்னியக்க நுழைவு வேண்டாம்" #: standalone/drakboot:196 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "ஆம், எனக்கு தன்னியக்க நுழைவு(பயனர்,மேசையமைப்பு) வேண்டும்" #: standalone/drakboot:203 #, c-format msgid "System mode" msgstr "இயக்க முறைமை" #: standalone/drakboot:206 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "இயக்கத் தொடக்கத்தில் வரைவியல்வழி முறைமைக்குச் செல்லவும்" #: standalone/drakboot:272 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, fuzzy, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "டிரேக்பிழை அறிவிப்பாளன் கருவி" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "ஒத்தியக்க கருவிகள்" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "சில கருவிகள்" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "டிரேக்வன்ெபாருள்" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "மாண்ட்ேரக்இணைய" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "டிரேக்பட்டி" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "டிரேக்பாதுகாப்பு" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "டிரேக்தொலைப்புழங்கி" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "டிரேக்பொதி" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "டிரேக்வின்மாற்றி" #: standalone/drakbug:58 standalone/draksambashare:1230 #, c-format msgid "Userdrake" msgstr "டிரேக்பயனர்" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "டிரேக்மாயாவிகள்" #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "பொதியைக் கண்டுபிடி" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "பொதி: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "கரு: " #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "அறிக்ைக" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "நிறுவப்படவில்ைல" #: standalone/drakbug:174 #, fuzzy, c-format msgid "Package not installed" msgstr "நிறுவப்படவில்ைல" #: standalone/drakclock:29 #, fuzzy, c-format msgid "DrakClock" msgstr "காப்ெபடுத்தல்" #: standalone/drakclock:39 #, fuzzy, c-format msgid "not defined" msgstr "வடிவமைக்கப்படவில்ைல" #: standalone/drakclock:41 #, fuzzy, c-format msgid "Change Time Zone" msgstr "கால மண்டலம்" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "" #: standalone/drakclock:47 #, fuzzy, c-format msgid "Is your hardware clock set to GMT?" msgstr "வன்ெபாருள் கடிகாரத்ைத GMT க்கு மாற்று" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "வலையமைப்பு அட்ைட" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "சேவையகம்:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "மீட்டமை" #: standalone/drakclock:224 #, fuzzy, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். இதை நிறுவ வேண்டுமா?" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "வலையமைப்பாக்கம் வடிவமைப்பு (%d அட்ைடகள்)" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Gateway:" msgstr "நுழைவாயில்:" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Interface:" msgstr "அட்ைட:" #: standalone/drakconnect:93 standalone/net_monitor:116 #, c-format msgid "Wait please" msgstr "தயவுசெய்து காத்திருக்கவும்..." #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "அட்ைட" #: standalone/drakconnect:109 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "State" msgstr "நிலை" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "கணினியின்பெயர்: " #: standalone/drakconnect:128 #, fuzzy, c-format msgid "Configure hostname..." msgstr "எலியை வடிவமையுங்கள்" #: standalone/drakconnect:142 standalone/drakconnect:845 #, c-format msgid "LAN configuration" msgstr "LAN வடிவமைப்பு.." #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "LAN-ஐ வடிவமைக்கவும்..." #: standalone/drakconnect:155 standalone/drakconnect:237 #: standalone/drakconnect:241 #, c-format msgid "Apply" msgstr "செயல்படுத்து" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "இணைப்புகளை மேலான்மைசெய்" #: standalone/drakconnect:215 #, fuzzy, c-format msgid "Device selected" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/drakconnect:296 #, fuzzy, c-format msgid "IP configuration" msgstr "CUPS வடிவமைப்பு" #: standalone/drakconnect:335 #, fuzzy, c-format msgid "DNS servers" msgstr "DNS சேவையகம்" #: standalone/drakconnect:343 #, c-format msgid "Search Domain" msgstr "தேடல் களம்" #: standalone/drakconnect:351 #, c-format msgid "static" msgstr "நிலையான" #: standalone/drakconnect:351 #, c-format msgid "DHCP" msgstr "" #: standalone/drakconnect:515 #, fuzzy, c-format msgid "Flow control" msgstr "Q" #: standalone/drakconnect:516 #, fuzzy, c-format msgid "Line termination" msgstr "இணையக் கணினி" #: standalone/drakconnect:527 #, fuzzy, c-format msgid "Modem timeout" msgstr "கரு தொடங்கல் வெளியேற்ற நேரம்" #: standalone/drakconnect:531 #, fuzzy, c-format msgid "Use lock file" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:536 #, fuzzy, c-format msgid "Busy wait" msgstr "குவைத்" #: standalone/drakconnect:541 #, fuzzy, c-format msgid "Modem sound" msgstr "ேமாடம்" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "செயல்படுத்து" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "செயல் நீக்கு" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "ஊடக வகை" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "கூற்றின் பெயர்" #: standalone/drakconnect:595 #, c-format msgid "Mac Address" msgstr "" #: standalone/drakconnect:596 standalone/harddrake2:28 #: standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "பாட்ைட" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "பாட்ைடயின் இடம்" #: standalone/drakconnect:700 standalone/drakgw:311 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல. மீண்டும் வன்ெபாருள் வடிவமைப்புக் கருவியை இயக்கவும்" #: standalone/drakconnect:708 #, fuzzy, c-format msgid "Remove a network interface" msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #: standalone/drakconnect:712 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #: standalone/drakconnect:744 #, fuzzy, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "வலையகமைப்புச் சேவைகள் மறுதொடங்கும்போது பிழை நேர்ந்துள்ளது \n" "\n" "%s" #: standalone/drakconnect:745 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:761 #, c-format msgid "No IP" msgstr "" #: standalone/drakconnect:762 #, fuzzy, c-format msgid "No Mask" msgstr "தவறான பொதி" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:763 standalone/drakconnect:916 #, fuzzy, c-format msgid "down" msgstr "முடிந்தது" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Connected" msgstr "இணைக்கப்பட்டள்ளது" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Not connected" msgstr "இணைக்கப்படவில்ைல" #: standalone/drakconnect:800 #, c-format msgid "Disconnect..." msgstr "இணைப்பிலிருந்து விடுபடு" #: standalone/drakconnect:800 #, c-format msgid "Connect..." msgstr "இணை..." #: standalone/drakconnect:841 #, fuzzy, c-format msgid "Deactivate now" msgstr "இப்ேபாது நிறுத்து" #: standalone/drakconnect:841 #, fuzzy, c-format msgid "Activate now" msgstr "இப்ேபாது துவக்கு" #: standalone/drakconnect:849 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "வலையமைப்பு அட்ைடகள் எதுவும் வடிவமைக்கப்படவில்ைல.\n" "வடிவமைக்க வடிவமை என்ற பொத்தானை கிளிக் செய்யவும்" #: standalone/drakconnect:863 #, c-format msgid "LAN Configuration" msgstr "வலையமைப்பாக்க வடிவமைப்பு" #: standalone/drakconnect:875 #, c-format msgid "Adapter %s: %s" msgstr "வலையமைப்பு அட்ைட %s: %s" #: standalone/drakconnect:884 #, c-format msgid "Boot Protocol" msgstr "தொடங்கு வரைமுறை" #: standalone/drakconnect:885 #, c-format msgid "Started on boot" msgstr "தொடங்கும்போதே துவக்கிவிடு" #: standalone/drakconnect:921 #, fuzzy, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" "இந்த வலையமைப்பு அட்ைட இன்னும் வடிவமைக்கப்படவில்ைல\n" "இதற்க்கான மாயாவியைத் துவக்கு" #: standalone/drakconnect:975 standalone/net_applet:51 #, fuzzy, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "இந்த வலையமைப்பு அட்ைட இன்னும் வடிவமைக்கப்படவில்ைல\n" "இதற்க்கான மாயாவியைத் துவக்கு" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52 #, fuzzy, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "இணையத்ெதாடர்பு வடிவமைக்கப்பாளன்" #: standalone/drakconnect:994 #, fuzzy, c-format msgid "Third DNS server (optional)" msgstr "முதல் DNS சேவையகத்தின் பெயர்" #: standalone/drakconnect:1016 #, c-format msgid "Internet Connection Configuration" msgstr "இணையத்ெதாடர்பு வடிவமைக்கப்பாளன்" #: standalone/drakconnect:1017 #, c-format msgid "Internet access" msgstr "இணையத்ெதாடர்பு" #: standalone/drakconnect:1019 standalone/net_monitor:95 #, c-format msgid "Connection type: " msgstr "தொடர்பு வகை: " #: standalone/drakconnect:1022 #, c-format msgid "Status:" msgstr "நிலை:" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:42 #, c-format msgid "XDM (X Display Manager)" msgstr "" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:72 #, fuzzy, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும்.ஓப்புதல் தரவும்?" #: standalone/drakedm:73 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfont:183 #, fuzzy, c-format msgid "Search installed fonts" msgstr "பொதி மேலாளர்" #: standalone/drakfont:185 #, fuzzy, c-format msgid "Unselect fonts installed" msgstr "நிறுவப்படவில்ைல" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "" #: standalone/drakfont:210 #, fuzzy, c-format msgid "No fonts found" msgstr "லிலோ தகவலை காண முடியவில்ைல" #: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 #: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 #: standalone/drakfont:412 standalone/drakfont:426 #, c-format msgid "done" msgstr "முடிந்தது" #: standalone/drakfont:223 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" #: standalone/drakfont:258 #, fuzzy, c-format msgid "Reselect correct fonts" msgstr "எழுத்துருத் தேர்வாளர்" #: standalone/drakfont:261 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "நுழைவிடத்தை நீக்கு" #: standalone/drakfont:271 #, c-format msgid "Search for fonts in installed list" msgstr "" #: standalone/drakfont:296 #, fuzzy, c-format msgid "%s fonts conversion" msgstr "இந்ேதனிசிய எப்படிச் செய்தல்" #: standalone/drakfont:325 #, fuzzy, c-format msgid "Fonts copy" msgstr "எழுத்துருக்கள்" #: standalone/drakfont:328 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "நிறுவல் வகையைத் தேர்வுச் செய்க" #: standalone/drakfont:335 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: standalone/drakfont:336 #, c-format msgid "True Type install done" msgstr "" #: standalone/drakfont:342 standalone/drakfont:357 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:351 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:361 #, c-format msgid "Suppress Temporary Files" msgstr "" #: standalone/drakfont:364 #, fuzzy, c-format msgid "Restart XFS" msgstr "மறுதொடக்கம்" #: standalone/drakfont:410 standalone/drakfont:420 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:422 #, fuzzy, c-format msgid "xfs restart" msgstr "மறுதொடக்கம்" #: standalone/drakfont:430 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:484 #, fuzzy, c-format msgid "Font List" msgstr "எழுத்துருக்கள்" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "பற்றி" #: standalone/drakfont:492 standalone/drakfont:687 standalone/drakfont:725 #, c-format msgid "Uninstall" msgstr "நிறுவல் நீக்கு" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "இறக்குமதி செய்" #: standalone/drakfont:494 #, c-format msgid "Get Windows Fonts" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:512 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:521 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:537 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:556 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "எந்த நிரல்கள் துவக்க வேண்டுமென தேர்வு சேய்யுங்கள்" #: standalone/drakfont:557 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:567 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:568 #, fuzzy, c-format msgid "StarOffice" msgstr "அலுவல் கருவிகள்" #: standalone/drakfont:569 #, fuzzy, c-format msgid "Abiword" msgstr "அபிவோர்ட்" #: standalone/drakfont:570 #, fuzzy, c-format msgid "Generic Printers" msgstr "பொது-இன திரையகம்" #: standalone/drakfont:584 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: standalone/drakfont:585 #, c-format msgid "File Selection" msgstr "கோப்புத் தேர்வு" #: standalone/drakfont:589 #, c-format msgid "Fonts" msgstr "எழுத்துருக்கள்" #: standalone/drakfont:652 #, fuzzy, c-format msgid "Import fonts" msgstr "வகிர்களை வடிவூட்டுங்கள்" #: standalone/drakfont:657 #, fuzzy, c-format msgid "Install fonts" msgstr "உருகருக்களை நிறுவுங்கள்" #: standalone/drakfont:692 #, c-format msgid "click here if you are sure." msgstr "" #: standalone/drakfont:694 #, c-format msgid "here if no." msgstr "" #: standalone/drakfont:733 #, c-format msgid "Unselected All" msgstr "" #: standalone/drakfont:736 #, c-format msgid "Selected All" msgstr "" #: standalone/drakfont:739 #, c-format msgid "Remove List" msgstr "பட்டியலை நீக்கு" #: standalone/drakfont:750 standalone/drakfont:769 #, fuzzy, c-format msgid "Importing fonts" msgstr "வகிர்களை வடிவூட்டுங்கள்" #: standalone/drakfont:754 standalone/drakfont:774 #, fuzzy, c-format msgid "Initial tests" msgstr "முதல் செய்தி" #: standalone/drakfont:755 #, fuzzy, c-format msgid "Copy fonts on your system" msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல" #: standalone/drakfont:756 #, fuzzy, c-format msgid "Install & convert Fonts" msgstr "எழுத்துரு அமைப்பு, முன்னோட்டம்" #: standalone/drakfont:757 #, fuzzy, c-format msgid "Post Install" msgstr "எழுத்துரு நிறுவி" #: standalone/drakfont:775 #, fuzzy, c-format msgid "Remove fonts on your system" msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல" #: standalone/drakfont:776 #, fuzzy, c-format msgid "Post Uninstall" msgstr "நிறுவப்படவில்ைல" #: standalone/drakgw:50 standalone/drakvpn:51 #, fuzzy, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "2.4 கருக்கள் மட்டுமே சரியாக பணியாற்றும்" #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "இணையத் தொடர்பு பரிமாறி" #: standalone/drakgw:79 #, fuzzy, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "உங்கள் கணினி இணையத் தொடர்பு பரிமாறியாக.\n" " வடிவமைக்கப்பட முடியும். உங்களுக்கு இது வேண்டுமா பொதுவாக நீங்கள் பரிமாறியை வீட்டில் " "பயன்படுத்த தேவையில்ைல.ஆதலால் இல்ைல என்ற பதிலை தேர்வுச்ெசய்யுங்கள்\n" "இதற்கு ஒரு தனிப்பட்ட வலையமைப்பு அட்ைட தேவை" #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது. தற்ேபாது \n" "இயக்கத்திலும் உள்ளது.\n" "\n" "என்ன செய்ய வேண்டும்?" #: standalone/drakgw:99 #, fuzzy, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது.ஆனால், தற்ேபாது \n" " முடக்கப்பட்டுள்ளது.\n" "\n" "என்ன செய்ய வேண்டும்?" #: standalone/drakgw:105 #, fuzzy, c-format msgid "Reconfigure" msgstr "மறுவடிவமை" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "ஓரே ஒரு வலையமைப்பு அட்ைட மட்டுமே உள்ளது\n" "\n" "%s\n" "\n" "இதை வைத்து உங்கள் வலையமைப்பாக்கத்ைத அமைக்கட்டுமா" #: standalone/drakgw:156 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "எந்த வலையமைப்பு அட்ைட உங்கள் வலையமைப்பாக்கத்துடன் இணைந்துள்ளது" #: standalone/drakgw:177 #, fuzzy, c-format msgid "Local Area Network settings" msgstr "C-Class Local Network" #: standalone/drakgw:180 #, c-format msgid "Local IP address" msgstr "" #: standalone/drakgw:182 #, fuzzy, c-format msgid "The internal domain name" msgstr "புதிய அச்சுப்ெபறியின் பெயர்" #: standalone/drakgw:188 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "%s! பிழை நேர்ந்துள்ளது மன்னிக்கவும் \n" #: standalone/drakgw:204 #, fuzzy, c-format msgid "Domain Name Server (DNS) configuration" msgstr "பரிமாறி வடிவமைப்பு" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "" #: standalone/drakgw:209 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "DHCP பரிமாறியின் IP" #: standalone/drakgw:236 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" #: standalone/drakgw:243 #, fuzzy, c-format msgid "Use automatic configuration (DHCP)" msgstr "தானியக்க வடிவமைப்பு" #: standalone/drakgw:244 #, c-format msgid "The DHCP start range" msgstr "" #: standalone/drakgw:245 #, c-format msgid "The DHCP end range" msgstr "" #: standalone/drakgw:246 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:247 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:270 #, c-format msgid "Proxy caching server (SQUID)" msgstr "" #: standalone/drakgw:274 #, c-format msgid "Use this gateway as proxy caching server" msgstr "" #: standalone/drakgw:275 #, c-format msgid "Admin mail" msgstr "" #: standalone/drakgw:276 #, fuzzy, c-format msgid "Visible hostname" msgstr "தொலைவு கணினியின் பெயர்" #: standalone/drakgw:277 #, fuzzy, c-format msgid "Proxy port" msgstr "பண்பு" #: standalone/drakgw:278 #, fuzzy, c-format msgid "Cache size (MB)" msgstr "அளவு" #: standalone/drakgw:300 #, fuzzy, c-format msgid "Broadcast printer information" msgstr "வன்தட்ைட பற்றிய தகவல்" #: standalone/drakgw:317 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "இணையத் தொடர்பு பரிமாறி செயல்பாட்டில் உள்ளது" #: standalone/drakgw:323 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "இணையத் தொடர்பு பரிமாறி தற்ேபாது முடமாக்கப்பட்டுள்ளது." #: standalone/drakgw:329 #, fuzzy, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது.\n" "உங்கள் வலையமைப்பகத்தில் உள்ள கணினிகள் இப்ேபாது உங்கள் இணையத் தொடர்பை பயன்படுத்தலாம்" #: standalone/drakgw:364 #, c-format msgid "Disabling servers..." msgstr "பரிமாறிகள் முடமாக்கப்படுகின்றன..." #: standalone/drakgw:378 #, c-format msgid "Firewalling configuration detected!" msgstr "நெருப்புச்சுவர் வடிவமைப்பு காணப்பட்டுள்ளது" #: standalone/drakgw:379 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "நெருப்புச்சுவர் வடிவமைப்பால் பிழை நேர்ந்துள்ளது" #: standalone/drakgw:384 #, c-format msgid "Configuring..." msgstr "வடிவமைக்கப்படுகிறது..." #: standalone/drakgw:385 #, c-format msgid "Configuring firewall..." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, fuzzy, c-format msgid "Mandriva Linux Help Center" msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakhosts:98 #, c-format msgid "Please add an host to be able to modify it." msgstr "" #: standalone/drakhosts:108 #, fuzzy, c-format msgid "Please modify information" msgstr "விரிவான தகவல்" #: standalone/drakhosts:109 #, fuzzy, c-format msgid "Please delete information" msgstr "விரிவான தகவல்" #: standalone/drakhosts:110 #, fuzzy, c-format msgid "Please add information" msgstr "விரிவான தகவல்" #: standalone/drakhosts:115 #, c-format msgid "IP address:" msgstr "IP முகவரி:" #: standalone/drakhosts:116 #, c-format msgid "Host name:" msgstr "" #: standalone/drakhosts:117 #, c-format msgid "Host Aliases:" msgstr "" #: standalone/drakhosts:123 #, c-format msgid "Please enter a valid IP address." msgstr "" #: standalone/drakhosts:129 #, c-format msgid "Same IP is already in %s file." msgstr "" #: standalone/drakhosts:197 #, c-format msgid "Host Aliases" msgstr "" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "" #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "" #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "" #: standalone/drakids:26 #, fuzzy, c-format msgid "Allowed addresses" msgstr "அனைத்து பயனரையும் அனுமதி" #: standalone/drakids:57 #, c-format msgid "Log" msgstr "உள்நுழை" #: standalone/drakids:61 #, fuzzy, c-format msgid "Clear logs" msgstr "அனைத்ைதயும் மாற்றியமை" #: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:464 #, c-format msgid "Blacklist" msgstr "" #: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:469 #, c-format msgid "Whitelist" msgstr "" #: standalone/drakids:71 #, fuzzy, c-format msgid "Remove from blacklist" msgstr "LVM இருந்து நீக்கு" #: standalone/drakids:72 #, c-format msgid "Move to whitelist" msgstr "" #: standalone/drakids:84 #, fuzzy, c-format msgid "Remove from whitelist" msgstr "LVM இருந்து நீக்கு" #: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170 #: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265 #: standalone/drakroam:182 standalone/net_applet:201 standalone/net_applet:379 #, fuzzy, c-format msgid "Unable to contact daemon" msgstr "கேபிள் இணைப்பு" #: standalone/drakids:202 #, c-format msgid "Date" msgstr "தேதி" #: standalone/drakids:203 #, fuzzy, c-format msgid "Attacker" msgstr "விவரங்கள்" #: standalone/drakids:204 #, fuzzy, c-format msgid "Attack type" msgstr "வகை: " #: standalone/drakids:205 #, c-format msgid "Service" msgstr "சேவை" #: standalone/drakids:206 standalone/net_applet:72 #, c-format msgid "Network interface" msgstr "வலையமைப்பு அட்ைட" #: standalone/draknfs:41 #, c-format msgid "map root user as anonymous" msgstr "" #: standalone/draknfs:42 #, c-format msgid "map all users to anonymous user" msgstr "" #: standalone/draknfs:43 #, c-format msgid "No user UID mapping" msgstr "" #: standalone/draknfs:44 #, c-format msgid "allow real remote root access" msgstr "" #: standalone/draknfs:83 #, c-format msgid "NFS server" msgstr "NFS சேவையகம்" #: standalone/draknfs:83 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "" #: standalone/draknfs:84 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "" #: standalone/draknfs:100 standalone/draksambashare:197 #, c-format msgid "Directory Selection" msgstr "" #: standalone/draknfs:105 standalone/draksambashare:202 #, c-format msgid "Should be a directory." msgstr "" #: standalone/draknfs:136 #, c-format msgid "" "NFS clients may be specified in a number of " "ways:\n" "\n" "\n" "single host: a host either by an " "abbreviated name recognized be the resolver, fully qualified domain name, or " "an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given " "as @group.\n" "\n" "\n" "wildcards: machine names may contain " "the wildcard characters * and ?. For instance: *.cs.foo.edu matches all " "hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export " "directories to all hosts on an IP (sub-)network simultaneously. for example, " "either `/255.255.252.0' or `/22' appended to the network base address " "result.\n" msgstr "" #: standalone/draknfs:151 #, c-format msgid "" "User ID options\n" "\n" "\n" "map root user as anonymou: map " "requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n" "\n" "\n" "allow real remote root access: turn " "off root squashing. This option is mainly useful for diskless clients " "(no_root_squash).\n" "\n" "\n" "map all users to anonymous user: map " "all uids and gids to the anonymous user (all_squash). Useful for NFS-" "exported public FTP directories, news spool directories, etc. The opposite " "option is no user UID mapping (no_all_squash), which is the default " "setting.\n" "\n" "\n" "anonuid and anongid: explicitly set " "the uid and gid of the anonymous account.\n" msgstr "" #: standalone/draknfs:167 #, c-format msgid "Synchronous access:" msgstr "" #: standalone/draknfs:168 #, c-format msgid "Secured Connection:" msgstr "" #: standalone/draknfs:169 #, c-format msgid "Read-Only share:" msgstr "" #: standalone/draknfs:171 #, c-format msgid "Advanced Options" msgstr "" #: standalone/draknfs:172 #, c-format msgid "" "%s: this option requires that " "requests originate on an internet port less than IPPORT_RESERVED (1024). " "This option is on by default." msgstr "" #: standalone/draknfs:173 #, c-format msgid "" "%s: allow either only read or both " "read and write requests on this NFS volume. The default is to disallow any " "request which changes the filesystem. This can also be made explicit by " "using this option." msgstr "" #: standalone/draknfs:174 #, c-format msgid "" "%s: disallows the NFS server to " "violate the NFS protocol and to reply to requests before any changes made by " "these requests have been committed to stable storage (e.g. disc drive)." msgstr "" #: standalone/draknfs:306 #, c-format msgid "Please add an NFS share to be able to modify it." msgstr "" #: standalone/draknfs:378 #, fuzzy, c-format msgid "Advanced Options Help" msgstr "வலையமைப்பாக்க வடிவமைப்பு" #: standalone/draknfs:389 #, c-format msgid "NFS directory" msgstr "" #: standalone/draknfs:391 standalone/draksambashare:588 #: standalone/draksambashare:767 #, c-format msgid "Directory:" msgstr "அடைவு :" #: standalone/draknfs:394 #, c-format msgid "Host access" msgstr "" #: standalone/draknfs:396 #, c-format msgid "Access:" msgstr "அணுகல்:" #: standalone/draknfs:396 #, c-format msgid "Hosts Access" msgstr "" #: standalone/draknfs:399 #, c-format msgid "User ID Mapping" msgstr "" #: standalone/draknfs:401 #, c-format msgid "User ID:" msgstr "பயனர் அடையாளம்:" #: standalone/draknfs:401 #, c-format msgid "Help User ID" msgstr "" #: standalone/draknfs:402 #, c-format msgid "Anonymous user ID:" msgstr "" #: standalone/draknfs:403 #, c-format msgid "Anonymous Group ID:" msgstr "" #: standalone/draknfs:444 #, c-format msgid "Can't create this directory." msgstr "" #: standalone/draknfs:447 #, c-format msgid "You must specify hosts access." msgstr "" #: standalone/draknfs:527 #, c-format msgid "Share Directory" msgstr "" #: standalone/draknfs:527 #, c-format msgid "Hosts Wildcard" msgstr "" #: standalone/draknfs:527 #, c-format msgid "General Options" msgstr "பொதுவான தேர்வுகள்" #: standalone/draknfs:527 #, c-format msgid "Custom Options" msgstr "தனிப்பயன் விருப்பங்கள்" #: standalone/draknfs:539 standalone/draksambashare:625 #: standalone/draksambashare:792 #, c-format msgid "Please enter a directory to share." msgstr "" #: standalone/draknfs:546 #, c-format msgid "Please use the modify button to set right access." msgstr "" #: standalone/draknfs:600 #, c-format msgid "DrakNFS manage NFS shares" msgstr "" #: standalone/draknfs:609 #, c-format msgid "Failed to add NFS share." msgstr "" #: standalone/draknfs:616 #, c-format msgid "Failed to Modify NFS share." msgstr "" #: standalone/draknfs:623 #, c-format msgid "Failed to remove an NFS share." msgstr "" #: standalone/drakperm:21 #, fuzzy, c-format msgid "System settings" msgstr "வகிர்தலை தனிப்பயனாக்கு" #: standalone/drakperm:22 #, fuzzy, c-format msgid "Custom settings" msgstr "வகிர்தலை தனிப்பயனாக்கு" #: standalone/drakperm:23 #, fuzzy, c-format msgid "Custom & system settings" msgstr "வகிர்தலை தனிப்பயனாக்கு" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "பதிவிக்கலாம்" #: standalone/drakperm:48 standalone/drakperm:323 standalone/draksambashare:95 #, c-format msgid "Path" msgstr "பாதை" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "பயனர்" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "குழு" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "அனுமதிகள்" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:109 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "மேல்" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "கீழ்" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "" #: standalone/drakperm:122 #, fuzzy, c-format msgid "Add a rule" msgstr "கூற்ைறச் சேர்" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "" #: standalone/drakperm:123 #, fuzzy, c-format msgid "Delete selected rule" msgstr "நுழைவிடத்ைத நீக்கு" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680 #: standalone/printerdrake:245 #, c-format msgid "Edit" msgstr "மாற்றியமை" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "பயனாளர்" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "குழு" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "மற்றவை" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "வாசி" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "எழுது" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "இயக்கு" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "" #: standalone/drakperm:273 #, fuzzy, c-format msgid "Use owner id for execution" msgstr "தானாக கண்டுபிடிக்கவும்" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "" #: standalone/drakperm:274 #, fuzzy, c-format msgid "Use group id for execution" msgstr "தானாக கண்டுபிடிக்கவும்" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "பயனர்:" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "குழு:" #: standalone/drakperm:298 #, fuzzy, c-format msgid "Current user" msgstr "பயனரை ஏற்றுக்ெகாள்ளவும்" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "பாதை தேர்வு" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "பண்பு" #: standalone/drakperm:380 #, c-format msgid "" "The first character of the path must be a slash (\"/\"):\n" "\"%s\"" msgstr "" #: standalone/drakperm:390 #, c-format msgid "Both the username and the group must valid!" msgstr "" #: standalone/drakperm:391 #, c-format msgid "User: %s" msgstr "" #: standalone/drakperm:392 #, c-format msgid "Group: %s" msgstr "" #: standalone/drakroam:33 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakroam:48 #, c-format msgid "SSID" msgstr "" #: standalone/drakroam:49 #, c-format msgid "Signal strength" msgstr "" #: standalone/drakroam:51 #, c-format msgid "Encryption" msgstr "மறையாக்கம்" #: standalone/drakroam:112 #, c-format msgid "Please enter settings for wireless network \"%s\"" msgstr "" #: standalone/drakroam:123 #, c-format msgid "DNS server" msgstr "DNS சேவையகம்" #: standalone/drakroam:228 #, c-format msgid "Connect" msgstr "இணை " #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:229 standalone/printerdrake:251 #, c-format msgid "Refresh" msgstr "மீளேற்று" #: standalone/draksambashare:62 #, fuzzy, c-format msgid "Share directory" msgstr "அடைவு இல்லை" #: standalone/draksambashare:63 standalone/draksambashare:96 #, c-format msgid "Comment" msgstr "குறிப்பு" #: standalone/draksambashare:64 standalone/draksambashare:97 #, fuzzy, c-format msgid "Browseable" msgstr "உலவு" #: standalone/draksambashare:65 #, c-format msgid "Public" msgstr "பொது" #: standalone/draksambashare:66 standalone/draksambashare:102 #, c-format msgid "Writable" msgstr "எழுதக்கூடிய" #: standalone/draksambashare:67 standalone/draksambashare:143 #, fuzzy, c-format msgid "Create mask" msgstr "உருவாக்கு" #: standalone/draksambashare:68 standalone/draksambashare:144 #, fuzzy, c-format msgid "Directory mask" msgstr "RAID இருந்து நீக்கு" #: standalone/draksambashare:69 #, fuzzy, c-format msgid "Read list" msgstr "வாசி" #: standalone/draksambashare:70 standalone/draksambashare:103 #: standalone/draksambashare:602 #, fuzzy, c-format msgid "Write list" msgstr "எழுது" #: standalone/draksambashare:71 standalone/draksambashare:135 #, fuzzy, c-format msgid "Admin users" msgstr "பயனரைச் சேர்" #: standalone/draksambashare:72 standalone/draksambashare:136 #, fuzzy, c-format msgid "Valid users" msgstr "பயனரைச் சேர்" #: standalone/draksambashare:73 #, fuzzy, c-format msgid "Inherit Permissions" msgstr "அனுமதிகள்" #: standalone/draksambashare:74 standalone/draksambashare:137 #, fuzzy, c-format msgid "Hide dot files" msgstr "கோப்புகளை மறைக்கவும்" #: standalone/draksambashare:76 standalone/draksambashare:142 #, fuzzy, c-format msgid "Preserve case" msgstr "விருப்பங்கள்" #: standalone/draksambashare:77 #, fuzzy, c-format msgid "Force create mode" msgstr "அச்சுபொறி மாடல்" #: standalone/draksambashare:78 #, fuzzy, c-format msgid "Force group" msgstr "பணிக்குழு" #: standalone/draksambashare:79 standalone/draksambashare:141 #, fuzzy, c-format msgid "Default case" msgstr "கொடாநிலை அச்சுப்ெபாறி" #: standalone/draksambashare:94 #, c-format msgid "Printer name" msgstr "" #: standalone/draksambashare:98 standalone/draksambashare:594 #, c-format msgid "Printable" msgstr "" #: standalone/draksambashare:99 #, c-format msgid "Print Command" msgstr "" #: standalone/draksambashare:100 #, c-format msgid "LPQ command" msgstr "" #: standalone/draksambashare:101 #, c-format msgid "Guest ok" msgstr "" #: standalone/draksambashare:104 standalone/draksambashare:145 #: standalone/draksambashare:603 #, fuzzy, c-format msgid "Inherit permissions" msgstr "அனுமதிகள்" #: standalone/draksambashare:106 #, c-format msgid "Create mode" msgstr "" #: standalone/draksambashare:107 #, c-format msgid "Use client driver" msgstr "" #: standalone/draksambashare:133 #, fuzzy, c-format msgid "Read List" msgstr "பட்டியலை நீக்கு" #: standalone/draksambashare:134 #, fuzzy, c-format msgid "Write List" msgstr "எழுது" #: standalone/draksambashare:139 #, fuzzy, c-format msgid "Force Group" msgstr "குழு" #: standalone/draksambashare:140 #, c-format msgid "Force create group" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "About Draksambashare" msgstr "" #: standalone/draksambashare:160 #, c-format msgid "" "Mandriva Linux \n" "Release: %s\n" "Author: Antoine Ginies\n" "\n" "This is a simple tool to easily manage Samba configuration." msgstr "" #: standalone/draksambashare:180 #, fuzzy, c-format msgid "Samba server" msgstr "ஒலிப் பரிமாறி" #: standalone/draksambashare:180 #, c-format msgid "Restarting/Reloading Samba server..." msgstr "" #: standalone/draksambashare:181 #, c-format msgid "Error Restarting/Reloading Samba server" msgstr "" #: standalone/draksambashare:367 #, fuzzy, c-format msgid "Add a Samba share" msgstr "ஒலிப் பரிமாறி" #: standalone/draksambashare:370 #, c-format msgid "Goal of this wizard is to easily create a new Samba share." msgstr "" #: standalone/draksambashare:372 #, fuzzy, c-format msgid "Name of the share:" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/draksambashare:373 standalone/draksambashare:587 #: standalone/draksambashare:768 #, c-format msgid "Comment:" msgstr "குறிப்பு:" #: standalone/draksambashare:374 #, c-format msgid "Path:" msgstr "பாதை:" #: standalone/draksambashare:379 #, c-format msgid "" "Share with the same name already exist or share name empty, please choose " "another name." msgstr "" #: standalone/draksambashare:383 standalone/draksambashare:389 #, c-format msgid "Can't create the directory, please enter a correct path." msgstr "" #: standalone/draksambashare:386 standalone/draksambashare:623 #: standalone/draksambashare:790 #, fuzzy, c-format msgid "Please enter a Comment for this share." msgstr "பயனருக்கு ஓர் பெயர் கொடுக்கவும்" #: standalone/draksambashare:417 #, c-format msgid "" "The wizard successfully added the Samba share. Now just double click on it " "in treeview to modify it" msgstr "" #: standalone/draksambashare:433 #, c-format msgid "pdf-gen - a PDF generator" msgstr "" #: standalone/draksambashare:434 #, c-format msgid "printers - all printers available" msgstr "" #: standalone/draksambashare:438 #, c-format msgid "Add Special Printer share" msgstr "" #: standalone/draksambashare:441 #, c-format msgid "" "Goal of this wizard is to easily create a new special printer Samba share." msgstr "" #: standalone/draksambashare:449 #, c-format msgid "A PDF generator already exists." msgstr "" #: standalone/draksambashare:473 #, c-format msgid "Printers and print$ already exist." msgstr "" #: standalone/draksambashare:524 #, c-format msgid "The wizard successfully added the printer Samba share" msgstr "" #: standalone/draksambashare:547 #, c-format msgid "Please add or select a Samba printer share to be able to modify it." msgstr "" #: standalone/draksambashare:583 #, c-format msgid "Printer share" msgstr "" #: standalone/draksambashare:586 #, c-format msgid "Printer name:" msgstr "அச்சுப்பொறிப் பெயர்:" #: standalone/draksambashare:592 standalone/draksambashare:773 #, fuzzy, c-format msgid "Writable:" msgstr "எழுது" #: standalone/draksambashare:593 standalone/draksambashare:774 #, fuzzy, c-format msgid "Browseable:" msgstr "உலவு" #: standalone/draksambashare:598 #, c-format msgid "Advanced options" msgstr "கூடுதல் விருப்பங்கள்" #: standalone/draksambashare:600 #, c-format msgid "Printer access" msgstr "" #: standalone/draksambashare:604 #, c-format msgid "Guest ok:" msgstr "" #: standalone/draksambashare:605 #, c-format msgid "Create mode:" msgstr "" #: standalone/draksambashare:609 #, c-format msgid "Printer command" msgstr "" #: standalone/draksambashare:611 #, c-format msgid "Print command:" msgstr "" #: standalone/draksambashare:612 #, c-format msgid "LPQ command:" msgstr "" #: standalone/draksambashare:613 #, c-format msgid "Printing:" msgstr "அச்சிடுதல்:" #: standalone/draksambashare:629 #, c-format msgid "create mode should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:691 #, c-format msgid "DrakSamba entry" msgstr "" #: standalone/draksambashare:696 #, c-format msgid "Please add or select a Samba share to be able to modify it." msgstr "" #: standalone/draksambashare:719 #, fuzzy, c-format msgid "Samba user access" msgstr "ஒலிப் பரிமாறி" #: standalone/draksambashare:727 #, fuzzy, c-format msgid "Mask options" msgstr "டிரேக்பாதுகாப்பு அடிப்படை விருப்பத்ேதர்வுகள்" #: standalone/draksambashare:741 #, fuzzy, c-format msgid "Display options" msgstr "விருப்பத்ேதர்வு தெரிவிக்கவும்" #: standalone/draksambashare:763 #, fuzzy, c-format msgid "Samba share directory" msgstr "அடைவு இல்லை" #: standalone/draksambashare:766 #, fuzzy, c-format msgid "Share name:" msgstr "பகிரின் பெயர்" #: standalone/draksambashare:772 #, c-format msgid "Public:" msgstr "" #: standalone/draksambashare:796 #, c-format msgid "" "Create mask, create mode and directory mask should be numeric. ie: 0755." msgstr "" #: standalone/draksambashare:803 #, c-format msgid "Please create this Samba user: %s" msgstr "" #: standalone/draksambashare:926 #, c-format msgid "User information" msgstr "" #: standalone/draksambashare:928 #, c-format msgid "User name:" msgstr "பயனர் பெயர்:" #: standalone/draksambashare:929 standalone/harddrake2:563 #, c-format msgid "Password:" msgstr "கடவுச்சொல்:" #: standalone/draksambashare:1129 #, c-format msgid "Failed to add Samba share." msgstr "" #: standalone/draksambashare:1138 #, c-format msgid "Failed to Modify Samba share." msgstr "" #: standalone/draksambashare:1147 #, c-format msgid "Failed to remove a Samba share." msgstr "" #: standalone/draksambashare:1154 #, c-format msgid "File share" msgstr "" #: standalone/draksambashare:1162 #, c-format msgid "Add printers" msgstr "" #: standalone/draksambashare:1168 #, c-format msgid "Failed to add printers." msgstr "" #: standalone/draksambashare:1177 #, c-format msgid "Failed to Modify." msgstr "" #: standalone/draksambashare:1186 #, c-format msgid "Failed to remove." msgstr "" #: standalone/draksambashare:1193 #, c-format msgid "Printers" msgstr "அச்சுபொறிகள்" #: standalone/draksambashare:1201 #, c-format msgid "Change password" msgstr "" #: standalone/draksambashare:1206 #, c-format msgid "Failed to change user password." msgstr "" #: standalone/draksambashare:1214 #, c-format msgid "Failed to add user." msgstr "" #: standalone/draksambashare:1217 #, c-format msgid "Delete user" msgstr "" #: standalone/draksambashare:1226 #, c-format msgid "Failed to delete user." msgstr "" #: standalone/draksambashare:1238 #, c-format msgid "Samba Users" msgstr "" #: standalone/draksambashare:1247 #, c-format msgid "DrakSamba manage Samba shares" msgstr "" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:53 standalone/net_applet:474 #, c-format msgid "Ignore" msgstr "புறக்கணி" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "புலங்களின் விளக்கம்\n" "\n" #: standalone/draksec:168 #, fuzzy, c-format msgid "(default value: %s)" msgstr " (கொடாநிலை)" #: standalone/draksec:210 #, fuzzy, c-format msgid "Security Level:" msgstr "பாதுகாப்பு நிலை" #: standalone/draksec:217 #, fuzzy, c-format msgid "Security Administrator:" msgstr "பாதுகாப்பு மேலாளர்(பெயர் அல்லது மின்னஞ்சல் முகவரி)" #: standalone/draksec:219 #, fuzzy, c-format msgid "Basic options" msgstr "டிரேக்பாதுகாப்பு அடிப்படை விருப்பத்ேதர்வுகள்" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "வலைப்பின்னல் விருப்பத்தேர்வுகள்" #: standalone/draksec:233 #, fuzzy, c-format msgid "System Options" msgstr "விருப்பத்ேதர்வுகள்" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "" #: standalone/draksec:298 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்" #: standalone/draksec:304 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "தயவுசெய்து காத்திருக்கவும்..நிறுவுதல் தொடங்கப்ேபாகிறது" #: standalone/draksound:47 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "இணைக்கப்படவில்ைல" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" #: standalone/draksplash:30 #, c-format msgid "x coordinate of text box" msgstr "" #: standalone/draksplash:31 #, c-format msgid "y coordinate of text box" msgstr "" #: standalone/draksplash:32 #, c-format msgid "text box width" msgstr "" #: standalone/draksplash:33 #, c-format msgid "text box height" msgstr "" #: standalone/draksplash:34 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:35 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:36 #, c-format msgid "the width of the progress bar" msgstr "" #: standalone/draksplash:37 #, c-format msgid "the height of the progress bar" msgstr "" #: standalone/draksplash:38 #, c-format msgid "x coordinate of the text" msgstr "" #: standalone/draksplash:39 #, c-format msgid "y coordinate of the text" msgstr "" #: standalone/draksplash:40 #, c-format msgid "text box transparency" msgstr "" #: standalone/draksplash:41 #, c-format msgid "progress box transparency" msgstr "" #: standalone/draksplash:42 #, c-format msgid "text size" msgstr "" #: standalone/draksplash:59 #, c-format msgid "Choose progress bar color 1" msgstr "" #: standalone/draksplash:60 #, c-format msgid "Choose progress bar color 2" msgstr "" #: standalone/draksplash:61 #, c-format msgid "Choose progress bar background" msgstr "" #: standalone/draksplash:62 #, c-format msgid "Gradient type" msgstr "" #: standalone/draksplash:63 #, c-format msgid "Choose text color" msgstr "" #: standalone/draksplash:65 standalone/draksplash:72 #, c-format msgid "Choose picture" msgstr "" #: standalone/draksplash:66 #, c-format msgid "Silent bootsplash" msgstr "" #: standalone/draksplash:69 #, c-format msgid "Choose text zone color" msgstr "" #: standalone/draksplash:70 #, c-format msgid "Text color" msgstr "உரை நிறம்" #: standalone/draksplash:71 #, c-format msgid "Background color" msgstr "பின்னணி வண்ணம்" #: standalone/draksplash:73 #, c-format msgid "Verbose bootsplash" msgstr "" #: standalone/draksplash:75 #, fuzzy, c-format msgid "Display logo on Console" msgstr "உருகருக்களை முனையத்தின் கீழ் காட்டுங்கள்" #: standalone/draksplash:78 #, c-format msgid "Console bootsplash" msgstr "" #: standalone/draksplash:84 #, fuzzy, c-format msgid "Theme name" msgstr "kஅதேவிளையாட்டு" #: standalone/draksplash:87 #, fuzzy, c-format msgid "final resolution" msgstr "பரிமாணங்கள்" #: standalone/draksplash:92 #, fuzzy, c-format msgid "Save theme" msgstr "உருகருக்களை நிறுவுங்கள்" #: standalone/draksplash:153 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: standalone/draksplash:162 #, c-format msgid "Unable to load image file %s" msgstr "" #: standalone/draksplash:173 #, fuzzy, c-format msgid "choose image" msgstr "கோப்பு ஒன்றைத் தேர்வுச் செய்" #: standalone/draksplash:188 #, c-format msgid "Color selection" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, fuzzy, c-format msgid "Add an UPS device" msgstr "உருப்படியை சேர்" #: standalone/drakups:83 #, fuzzy, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "பினாமி வடிவமைப்பு கருவிக்கு வருக.\n" "\n" "இங்கு உங்கள் http மற்றும் ftp பினாமியை வடிவமைக்க கடவுச்ெசால்\n" " வைத்து அல்லது இல்லாமல் அமைக்க முடியும்\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, fuzzy, c-format msgid "Autodetection" msgstr "தன்னியக்க-கண்டுபிடித்தல்" #: standalone/drakups:101 standalone/harddrake2:356 #, c-format msgid "Detection in progress" msgstr "இன்னும் தேடுதல் நடைபெறுகிறது" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, fuzzy, c-format msgid "No new UPS devices was found" msgstr "லிலோ தகவலை காண முடியவில்ைல" #: standalone/drakups:128 standalone/drakups:140 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "OKI அச்சுபொறியின் வடிவமைப்பு" #: standalone/drakups:128 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "தயவுசெய்து, உங்கள் எலியை சோதனை செய்யுங்கள்" #: standalone/drakups:129 #, fuzzy, c-format msgid "Manufacturer / Model:" msgstr "அச்சுப்ெபாறியின் தயாரிப்பாளரின் பெயர், மாடல்" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "கணினியின்பெயர்:" #: standalone/drakups:145 #, fuzzy, c-format msgid "The name of your ups" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/drakups:146 #, fuzzy, c-format msgid "The driver that manages your ups" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "துறை:" #: standalone/drakups:149 #, fuzzy, c-format msgid "The port on which is connected your ups" msgstr "தயவுசெய்து, உங்கள் எலி இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறைவயைத் தேர்வுச் செய்யுங்கள்" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:250 #, fuzzy, c-format msgid "UPS devices" msgstr "சேவைகள்" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:85 standalone/harddrake2:111 #: standalone/harddrake2:118 #, c-format msgid "Name" msgstr "கணினியின்பெயர்" #: standalone/drakups:269 #, fuzzy, c-format msgid "UPS users" msgstr "பயனர்கள்" #: standalone/drakups:285 #, fuzzy, c-format msgid "Access Control Lists" msgstr "வலையமைப்புக் கருவிகளுக்கு அனுமதி" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "விதிகள்" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "செயல்" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "நிலை" #: standalone/drakups:299 #, fuzzy, c-format msgid "ACL name" msgstr "LVM பெயர்" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, fuzzy, c-format msgid "DrakUPS" msgstr "வோரக்(US)" #: standalone/drakups:339 #, fuzzy, c-format msgid "Welcome to the UPS configuration tools" msgstr "வடிவமைப்பு சோதித்து பார்க்கப்படுகிறது" #: standalone/drakvpn:73 #, fuzzy, c-format msgid "DrakVPN" msgstr "வோரக்(US)" #: standalone/drakvpn:95 #, fuzzy, c-format msgid "The VPN connection is enabled." msgstr "இணையத் தொடர்பு பரிமாறி செயல்பாட்டில் உள்ளது" #: standalone/drakvpn:96 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது. தற்ேபாது \n" "இயக்கத்திலும் உள்ளது.\n" "\n" "என்ன செய்ய வேண்டும்?" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "முடமாக்கு" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "மறுவடிவமை" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 #: standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "நீக்கு" #: standalone/drakvpn:105 #, fuzzy, c-format msgid "Disabling VPN..." msgstr "பரிமாறிகள் முடமாக்கப்படுகின்றன..." #: standalone/drakvpn:114 #, fuzzy, c-format msgid "The VPN connection is now disabled." msgstr "இணையத் தொடர்பு பரிமாறி தற்ேபாது முடமாக்கப்பட்டுள்ளது." #: standalone/drakvpn:121 #, fuzzy, c-format msgid "VPN connection currently disabled" msgstr "இணையத் தொடர்பு பரிமாறி தற்ேபாது முடமாக்கப்பட்டுள்ளது." #: standalone/drakvpn:122 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது.ஆனால், தற்ேபாது \n" " முடக்கப்பட்டுள்ளது.\n" "\n" "என்ன செய்ய வேண்டும்?" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "செயல்படுத்து" #: standalone/drakvpn:135 #, fuzzy, c-format msgid "Enabling VPN..." msgstr "பரிமாறிகளை செயல்படுத்து" #: standalone/drakvpn:141 #, fuzzy, c-format msgid "The VPN connection is now enabled." msgstr "இணையத் தொடர்பு பரிமாறி செயல்பாட்டில் உள்ளது" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, fuzzy, c-format msgid "Kernel module." msgstr "கூறுகளை நீக்கிவிடு" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "%s பொதிகளை நிறுவுவதில் பிழை நேர்ந்துள்ளது" #: standalone/drakvpn:278 #, fuzzy, c-format msgid "Security Policies" msgstr "பாதுகாப்பு நிலை" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:281 standalone/drakvpn:292 #, fuzzy, c-format msgid "Configuration file" msgstr "வடிவமைப்புகள்" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:311 standalone/drakvpn:671 #, fuzzy, c-format msgid "%s entries" msgstr ", %s வில்" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:319 standalone/drakvpn:680 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "மின்னஞ்சல்" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Commit" msgstr "சொருகுக" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 #: standalone/drakvpn:699 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "LAN வடிவமைப்பு.." #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "config setup" msgstr "மறுவடிவமை" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "conn %default" msgstr "கொடாநிலை" #: standalone/drakvpn:362 #, fuzzy, c-format msgid "normal conn" msgstr "இயல்பான முறைமை" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, fuzzy, c-format msgid "Exists!" msgstr "வெளிச்ெசல்" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:391 #, fuzzy, c-format msgid "interfaces" msgstr "அட்ைட" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:437 #, fuzzy, c-format msgid "PFS" msgstr "HFS கோப்பமைப்பு" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "இடது" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:477 #, fuzzy, c-format msgid "section name" msgstr "தொடர்பின் பெயர்: " #: standalone/drakvpn:478 #, c-format msgid "authby" msgstr "" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "தானே" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "வலது" #: standalone/drakvpn:486 #, fuzzy, c-format msgid "rightcert" msgstr "மிக உயர்வான" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:562 standalone/drakvpn:812 #, fuzzy, c-format msgid "Edit section" msgstr "தொடங்குத்திரை தேர்வு" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 #: standalone/drakvpn:863 #, fuzzy, c-format msgid "Section names" msgstr "தொடர்பின் பெயர்: " #: standalone/drakvpn:576 #, fuzzy, c-format msgid "Can not edit!" msgstr "இதை திறக்க முடியவில்ைல%s: %s\n" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:642 standalone/drakvpn:859 #, fuzzy, c-format msgid "Remove section" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "தடம்" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "தொலைநிலை செயலி" #: standalone/drakvpn:721 #, fuzzy, c-format msgid "sainfo" msgstr "தகவல்" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:732 #, fuzzy, c-format msgid "path type" msgstr "வகையை மாற்று" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:756 standalone/drakvpn:849 #, fuzzy, c-format msgid "real file" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:927 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "ஐரோப்பிய வரைமுறை" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:960 #, fuzzy, c-format msgid "Sainfo destination protocol" msgstr "டிரேக்வின்மாற்றி" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:982 #, fuzzy, c-format msgid "Lifetime number" msgstr "ஒரு எண்" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1019 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "நல்குாிமை" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1022 #, fuzzy, c-format msgid "deflate" msgstr "கொடாநிலை" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "தொலை" #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1038 #, fuzzy, c-format msgid "Exchange mode" msgstr "அழைக்கும் முறை" #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1046 #, fuzzy, c-format msgid "Generate policy" msgstr "பாதுகாப்பு" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "நீக்கு" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "on" msgstr "இயக்கு" #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "செயல்நிறுத்திய" #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1069 #, fuzzy, c-format msgid "My certfile" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/drakvpn:1070 #, c-format msgid "Name of the certificate" msgstr "" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1072 #, c-format msgid "Name of the private key" msgstr "" #: standalone/drakvpn:1073 #, fuzzy, c-format msgid "Peers certfile" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1075 #, fuzzy, c-format msgid "Verify cert" msgstr "மிக அழகானவை" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1100 #, fuzzy, c-format msgid "Peers identifier" msgstr "அச்சுப்ெபாறி" #: standalone/drakvpn:1101 #, fuzzy, c-format msgid "Proposal" msgstr "வரைமுறை" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1112 #, fuzzy, c-format msgid "DH group" msgstr "கிரப்" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "கட்டளை" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1122 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "ஐரோப்பிய வரைமுறை" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, c-format msgid "any" msgstr "ஏதாவது" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "கொடியிடு" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "திசை" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "ipsec" msgstr "டிரேக்பாதுகாப்பு" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "discard" msgstr "முடமாக்கு" #: standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "முறைமை" #: standalone/drakvpn:1129 #, fuzzy, c-format msgid "tunnel" msgstr "தடம்" #: standalone/drakvpn:1129 #, fuzzy, c-format msgid "transport" msgstr "மற்ற துறைகளை" #: standalone/drakvpn:1131 #, fuzzy, c-format msgid "Source/destination" msgstr "வேலைக்களம்" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "கொடாநிலை" #: standalone/drakvpn:1132 #, fuzzy, c-format msgid "use" msgstr "எலி" #: standalone/drakvpn:1132 #, c-format msgid "unique" msgstr "தனிப்பட்ட" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "" #: standalone/drakxtv:47 #, fuzzy, c-format msgid "France [SECAM]" msgstr "பிரஞ்சு" #: standalone/drakxtv:48 #, fuzzy, c-format msgid "Newzealand" msgstr "நெதர்லாந்து" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "டிவி norm:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "இனிய நல்வாழ்த்துக்கள்" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: standalone/harddrake2:29 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "இந்த பாட்ைடயில் தான் இச்சாதனம் பயன்படுகிறது(உதா: PCI, USB, ...)" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr " பாட்ைட அடையாளம்" #: standalone/harddrake2:32 #, fuzzy, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "PCI/USB சாதனங்கள் " #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "- pci சாதனங்கள் - eide சாதனங்கள் - scsi சாதனங்கள் " #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:39 #, fuzzy, c-format msgid "this field describes the device" msgstr "வன்ெபாருள் வகையை பற்றிய தகவல்" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "பழைய சாதனக்கோப்பு" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "பழைய சாதனத்தின் பெயர் சாதனப்ெபாதியில் பயன்பட்டுள்ளது" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "புதிய devfs சாதனம்" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "கூறு" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "இயக்கி நிரலின் ஒரு கூறு" #: standalone/harddrake2:47 #, fuzzy, c-format msgid "Extended partitions" msgstr "வகிர் ஒன்றை உருவாக்ககு " #: standalone/harddrake2:47 #, fuzzy, c-format msgid "the number of extended partitions" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "வடிவயியல்" #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:49 #, fuzzy, c-format msgid "Disk controller" msgstr "SMBus கட்டுபாடுகள்" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "வன்ெபாருளின் வகை" #: standalone/harddrake2:51 standalone/harddrake2:83 #: standalone/printerdrake:224 #, c-format msgid "Model" msgstr "வகை" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "வன்தட்டின் வகை" #: standalone/harddrake2:52 #, fuzzy, c-format msgid "network printer port" msgstr "வலையமைப்புக் அச்சுப்ெபாறி(TCP/Socket)" #: standalone/harddrake2:53 #, fuzzy, c-format msgid "Primary partitions" msgstr "வகிர்களை வடிவூட்டுங்கள்" #: standalone/harddrake2:53 #, fuzzy, c-format msgid "the number of the primary partitions" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:55 #, fuzzy, c-format msgid "the PCI bus on which the device is plugged" msgstr "இந்த பாட்ைடயில் தான் இச்சாதனம் பயன்படுகிறது(உதா: PCI, USB, ...)" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "PCI device #" msgstr "சேவைகள்" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "PCI device number" msgstr "ஒரு எண்" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "PCI function number" msgstr "தொடர்பின் பெயர்: " #: standalone/harddrake2:58 #, fuzzy, c-format msgid "Vendor ID" msgstr "விற்பவர்" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "Device ID" msgstr "சாதனம்: " #: standalone/harddrake2:59 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "Sub device ID" msgstr "சேவைகள்" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:62 #, fuzzy, c-format msgid "Device USB ID" msgstr "சாதனம்: " #: standalone/harddrake2:62 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "" #: standalone/harddrake2:66 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:67 #, fuzzy, c-format msgid "Cache size" msgstr "அளவு" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: standalone/harddrake2:72 #, fuzzy, c-format msgid "Cpuid level" msgstr "பாதுகாப்பு நிலை" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "" #: standalone/harddrake2:73 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "குறிகள்" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "" #: standalone/harddrake2:84 #, fuzzy, c-format msgid "Model name" msgstr "கூற்றின் பெயர்" #: standalone/harddrake2:84 #, fuzzy, c-format msgid "official vendor name of the cpu" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:85 #, fuzzy, c-format msgid "the name of the CPU" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "" #: standalone/harddrake2:86 #, fuzzy, c-format msgid "the number of the processor" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:87 #, fuzzy, c-format msgid "Model stepping" msgstr "வண்ண அமைப்புகள்" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:88 #, fuzzy, c-format msgid "the vendor name of the processor" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:89 #, fuzzy, c-format msgid "Write protection" msgstr "அச்சுப்ெபாறி தன்னியக்க கண்டுபிடித்தல்" #: standalone/harddrake2:89 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:93 #, fuzzy, c-format msgid "Floppy format" msgstr "வடிவூட்டு" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "தடம்" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI தடம்" #: standalone/harddrake2:98 #, fuzzy, c-format msgid "Disk identifier" msgstr "அச்சுப்ெபாறி" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:99 #, fuzzy, c-format msgid "Logical unit number" msgstr "உள்ளமை கோப்புகள்" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, fuzzy, c-format msgid "Installed size" msgstr "இயக்கத்ைத நிறுவுங்கள்" #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:107 #, fuzzy, c-format msgid "Enabled Size" msgstr "செயல்படுத்து" #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:108 #, fuzzy, c-format msgid "type of the memory device" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "வேகம்" #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:110 #, fuzzy, c-format msgid "Bank connections" msgstr "கேபிள் இணைப்பு" #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:115 #, fuzzy, c-format msgid "Device file" msgstr "பழைய சாதனக்கோப்பு" #: standalone/harddrake2:115 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:116 #, fuzzy, c-format msgid "whether the wheel is emulated or not" msgstr "பொத்தான் போன்மி" #: standalone/harddrake2:117 #, fuzzy, c-format msgid "the type of the mouse" msgstr "தயவுசெய்து, உங்கள் எலியை சோதனை செய்யுங்கள்" #: standalone/harddrake2:118 #, fuzzy, c-format msgid "the name of the mouse" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "பொத்தான்களின் எண்ணிக்ைக" #: standalone/harddrake2:119 #, fuzzy, c-format msgid "the number of buttons the mouse has" msgstr "சாதனங்களின் விற்பவர் பெயர்" #: standalone/harddrake2:120 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "தயவுசெய்து, உங்கள் எலி இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறைவயைத் தேர்வுச் செய்யுங்கள்" #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:128 standalone/harddrake2:137 #: standalone/harddrake2:144 standalone/harddrake2:152 #: standalone/harddrake2:322 #, c-format msgid "Identification" msgstr "அடையாளம்" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "இணைப்பு" #: standalone/harddrake2:138 #, fuzzy, c-format msgid "Performances" msgstr "விருப்பங்கள்: " #: standalone/harddrake2:139 #, fuzzy, c-format msgid "Bugs" msgstr "பாட்ைட" #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "சாதனம்" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "வகிர்வுகள்" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "தன்மைகள்" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 #: standalone/printerdrake:146 standalone/printerdrake:159 #: standalone/printerdrake:171 #, c-format msgid "/_Options" msgstr "/_விருப்பத்ேதர்வு" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 #: standalone/printerdrake:172 standalone/printerdrake:174 #: standalone/printerdrake:177 standalone/printerdrake:179 #, c-format msgid "/_Help" msgstr "/_உதவி" #: standalone/harddrake2:181 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது" #: standalone/harddrake2:182 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது" #: standalone/harddrake2:183 #, fuzzy, c-format msgid "/Autodetect _jaz drives" msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:192 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "/_வெளிச்ெசல்" #: standalone/harddrake2:205 #, fuzzy, c-format msgid "/_Fields description" msgstr "குறிப்பு" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "டிரேக்வன்ெபாருள் உதவி" #: standalone/harddrake2:216 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: standalone/harddrake2:222 standalone/printerdrake:177 #, c-format msgid "/_Report Bug" msgstr "/_பிழைகளை அறிவிக்க" #: standalone/harddrake2:224 standalone/printerdrake:179 #, c-format msgid "/_About..." msgstr "/_பற்றி" #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "டிரேக்வன்ெபாருள் பற்றி" #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, fuzzy, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" msgstr "" "இது டிரேக்வன்ெபாருள், மாண்ட்ேரக் வன்ெபாருள் வடிவமைக்பபுக் கருவி\n" "வெளியீடு: %s\n" "ஆசிரியர்: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" #: standalone/harddrake2:242 #, fuzzy, c-format msgid "Harddrake2" msgstr "டிரேக்வன்ெபாருள்" #: standalone/harddrake2:253 #, c-format msgid "Detected hardware" msgstr "கண்டுபிடித்த வன்ெபாருட்களின் விவரங்களைப் பாருங்கள்" #: standalone/harddrake2:258 #, c-format msgid "Configure module" msgstr "கூற்ைற வடிவமையுங்கள்" #: standalone/harddrake2:265 #, c-format msgid "Run config tool" msgstr "வடிவமைப்புக் கருவியை இயக்கு" #: standalone/harddrake2:289 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: standalone/harddrake2:310 standalone/printerdrake:306 #: standalone/printerdrake:320 #, c-format msgid "Unknown" msgstr "தெரியாதது" #: standalone/harddrake2:330 #, c-format msgid "Misc" msgstr "இதர உருப்படிகள்" #: standalone/harddrake2:406 #, c-format msgid "secondary" msgstr "இடைநிலை" #: standalone/harddrake2:406 #, c-format msgid "primary" msgstr "தொடக்கநிலை" #: standalone/harddrake2:410 #, fuzzy, c-format msgid "burner" msgstr "அச்சுப்ெபாறி" #: standalone/harddrake2:410 #, c-format msgid "DVD" msgstr "டிவிடி இயக்கி" #: standalone/harddrake2:557 standalone/harddrake2:560 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:562 #, c-format msgid "Account:" msgstr "கணக்கு" #: standalone/harddrake2:564 #, c-format msgid "Hostname:" msgstr "புரவலர் பெயர்:" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "தயவுசெய்து உங்கள் விசைப்பலகை இட அமைவைத் தேர்வு செய்க" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: standalone/localedrake:38 #, fuzzy, c-format msgid "LocaleDrake" msgstr "உள்ளமை கோப்புகள்" #: standalone/localedrake:44 #, fuzzy, c-format msgid "You should install the following packages: %s" msgstr "%s பொதி நிறுவப்படுகிறது" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: standalone/localedrake:47 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: standalone/localedrake:55 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: standalone/logdrake:49 #, fuzzy, c-format msgid "Mandriva Linux Tools Logs" msgstr "மாண்ட்ேரக் கட்டுப்பாடு மையம்" #: standalone/logdrake:50 #, fuzzy, c-format msgid "Logdrake" msgstr "டிேரக்பதிவுகள் " #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "/கோப்பு/_புதியது" #: standalone/logdrake:70 #, fuzzy, c-format msgid "N" msgstr "Q" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "/கோப்பு/_திற" #: standalone/logdrake:71 #, fuzzy, c-format msgid "O" msgstr "Q" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "/கோப்பு/_சேமி" #: standalone/logdrake:72 #, fuzzy, c-format msgid "S" msgstr "Q" #: standalone/logdrake:73 #, fuzzy, c-format msgid "/File/Save _As" msgstr "/கோப்பு/_சேமி" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "/கோப்பு/-" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "/_விருப்பத்ேதர்வு/சோதனை" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "/உதவி/_பற்றி..." #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:115 #, fuzzy, c-format msgid "search" msgstr "பூமி" #: standalone/logdrake:127 #, fuzzy, c-format msgid "A tool to monitor your logs" msgstr "கைக்கணினி நிரல் " #: standalone/logdrake:128 standalone/net_applet:341 standalone/net_monitor:93 #, c-format msgid "Settings" msgstr "அமைப்புகள்" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "" #: standalone/logdrake:138 #, fuzzy, c-format msgid "Choose file" msgstr "சாதனத்ைத தேர்வுச் செய்யுங்கள்" #: standalone/logdrake:150 #, c-format msgid "Calendar" msgstr "நாள்காட்டி" #: standalone/logdrake:160 #, fuzzy, c-format msgid "Content of the file" msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #: standalone/logdrake:164 standalone/logdrake:402 #, fuzzy, c-format msgid "Mail alert" msgstr "மின்னஞ்சல்" #: standalone/logdrake:171 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:224 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: standalone/logdrake:379 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: standalone/logdrake:380 #, c-format msgid "Domain Name Resolver" msgstr "" #: standalone/logdrake:381 #, fuzzy, c-format msgid "Ftp Server" msgstr "சேவையகம்" #: standalone/logdrake:382 #, fuzzy, c-format msgid "Postfix Mail Server" msgstr "மின்னஞ்சல் பரிமாறி" #: standalone/logdrake:383 #, fuzzy, c-format msgid "Samba Server" msgstr "ஒலிப் பரிமாறி" #: standalone/logdrake:385 #, fuzzy, c-format msgid "Webmin Service" msgstr "துவக்கச்சேவைகள்" #: standalone/logdrake:386 #, fuzzy, c-format msgid "Xinetd Service" msgstr "துவக்கச்சேவைகள்" #: standalone/logdrake:397 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: standalone/logdrake:398 #, fuzzy, c-format msgid "Stop the mail alert system" msgstr "கோப்பமைப்ேபா அமையுங்கள்" #: standalone/logdrake:405 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: standalone/logdrake:406 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: standalone/logdrake:409 #, c-format msgid "What do you want to do?" msgstr "நீங்கள் என்ன செய்ய விரும்புகிறீர்கள்?" #: standalone/logdrake:416 #, fuzzy, c-format msgid "Services settings" msgstr "எலி அமைப்புக்கள்" #: standalone/logdrake:417 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: standalone/logdrake:424 #, fuzzy, c-format msgid "Load setting" msgstr "வண்ண அமைப்புகள்" #: standalone/logdrake:425 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: standalone/logdrake:426 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:431 #, fuzzy, c-format msgid "Alert configuration" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: standalone/logdrake:432 #, c-format msgid "Please enter your email address below " msgstr "உங்கள் மின்னஞ்சல் முகவரியைத் தருக" #: standalone/logdrake:433 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" #: standalone/logdrake:452 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:458 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:517 #, c-format msgid "Save as.." msgstr "எனச் சேமி.." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்" #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "மூன்றாவது பொத்தான் இருப்பதாக கருதுங்கள்?" #: standalone/mousedrake:61 #, fuzzy, c-format msgid "Mouse test" msgstr "எலி இயக்கங்கள்" #: standalone/mousedrake:64 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "தயவுசெய்து, உங்கள் எலியை சோதனை செய்யுங்கள்" #: standalone/net_applet:47 #, fuzzy, c-format msgid "Network is up on interface %s" msgstr "வலையமைப்பு அட்ைட" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:50 #, fuzzy, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "வலையமைப்பு வடிவமைக்கப்படவில்ைல" #: standalone/net_applet:56 standalone/net_applet:76 #: standalone/net_monitor:468 #, fuzzy, c-format msgid "Connect %s" msgstr "இணையவும்" #: standalone/net_applet:57 standalone/net_applet:76 #: standalone/net_monitor:468 #, fuzzy, c-format msgid "Disconnect %s" msgstr "இணைப்ேபா துண்டிக்கவும்" #: standalone/net_applet:58 #, fuzzy, c-format msgid "Monitor Network" msgstr "மறுதொடக்கம்" #: standalone/net_applet:60 #, c-format msgid "Manage wireless networks" msgstr "" #: standalone/net_applet:61 #, fuzzy, c-format msgid "Configure Network" msgstr "வலையமைப்பாக்கங்களை வடிவமையுங்கள்" #: standalone/net_applet:63 #, fuzzy, c-format msgid "Watched interface" msgstr "அட்ைட" #: standalone/net_applet:92 #, c-format msgid "Profiles" msgstr "வடிவங்கள்" #: standalone/net_applet:101 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:329 #, c-format msgid "Interactive Firewall automatic mode" msgstr "" #: standalone/net_applet:334 #, c-format msgid "Always launch on startup" msgstr "" #: standalone/net_applet:338 #, fuzzy, c-format msgid "Wireless networks" msgstr "கேபிள் இணைப்பு" #: standalone/net_applet:423 #, fuzzy, c-format msgid "Interactive Firewall: intrusion detected" msgstr "நெருப்புச்சுவர் வடிவமைப்பு காணப்பட்டுள்ளது" #: standalone/net_applet:436 #, fuzzy, c-format msgid "What do you want to do with this attacker?" msgstr "ஆட்டத்தை நிறுத்த வேண்டுமா ?" #: standalone/net_applet:439 #, fuzzy, c-format msgid "Attack details" msgstr "விவரங்கள்" #: standalone/net_applet:443 #, fuzzy, c-format msgid "Attack time: %s" msgstr "செயல்: %s" #: standalone/net_applet:444 #, fuzzy, c-format msgid "Network interface: %s" msgstr "வலை முகப்புக்கள்" #: standalone/net_applet:445 #, fuzzy, c-format msgid "Attack type: %s" msgstr "வகை: " #: standalone/net_applet:446 #, fuzzy, c-format msgid "Protocol: %s" msgstr "ஒப்புநெறிகள்" #: standalone/net_applet:447 #, fuzzy, c-format msgid "Attacker IP address: %s" msgstr "(_R)தொலை IP முகவரி:" #: standalone/net_applet:448 #, fuzzy, c-format msgid "Attacker hostname: %s" msgstr "புரவலன் பெயரை பெறுவதில் தோல்வி: %s\n" #: standalone/net_applet:451 #, fuzzy, c-format msgid "Service attacked: %s" msgstr "(_t)சேவை வகை:" #: standalone/net_applet:452 #, fuzzy, c-format msgid "Port attacked: %s" msgstr "துறை: %s" #: standalone/net_applet:454 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_applet:459 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_monitor:57 standalone/net_monitor:62 #, fuzzy, c-format msgid "Network Monitoring" msgstr "வலையமைப்பாக்க வடிவமைப்பு " #: standalone/net_monitor:98 #, c-format msgid "Global statistics" msgstr "" #: standalone/net_monitor:101 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:101 #, c-format msgid "Average" msgstr "சராசரி வரை" #: standalone/net_monitor:102 #, fuzzy, c-format msgid "" "Sending\n" "speed:" msgstr "கோப்புகளைக் கண்டுபிடி " #: standalone/net_monitor:103 #, fuzzy, c-format msgid "" "Receiving\n" "speed:" msgstr "கோப்புகளைக் கண்டுபிடி " #: standalone/net_monitor:107 #, fuzzy, c-format msgid "" "Connection\n" "time: " msgstr "தொடர்பு வகை: " #: standalone/net_monitor:114 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:133 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "இணைப்பு சோதித்து பார்க்கப்படுகிறது" #: standalone/net_monitor:182 standalone/net_monitor:195 #, fuzzy, c-format msgid "Disconnecting from Internet " msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #: standalone/net_monitor:182 standalone/net_monitor:195 #, fuzzy, c-format msgid "Connecting to Internet " msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #: standalone/net_monitor:226 #, fuzzy, c-format msgid "Disconnection from Internet failed." msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #: standalone/net_monitor:227 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #: standalone/net_monitor:229 #, fuzzy, c-format msgid "Connection complete." msgstr "தொடர்பு வேகம்: " #: standalone/net_monitor:230 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" #: standalone/net_monitor:335 #, fuzzy, c-format msgid "Color configuration" msgstr "அறிவிப்பாளரின் வடிவமைப்பு " #: standalone/net_monitor:383 standalone/net_monitor:403 #, c-format msgid "sent: " msgstr "" #: standalone/net_monitor:390 standalone/net_monitor:407 #, c-format msgid "received: " msgstr "" #: standalone/net_monitor:397 #, c-format msgid "average" msgstr "" #: standalone/net_monitor:400 #, fuzzy, c-format msgid "Local measure" msgstr "உள்ளமை கோப்புகள்" #: standalone/net_monitor:461 #, fuzzy, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "எச்சரிக்ைக, மற்றுமொறு இணையத்ெதாடர்பு கண்டுபிடிக்கப்பட்டுள்ளது. இது அநேகமாக உங்கள் " "வலையமைப்பாக்கத்ைத பயன்படுத்தலாம்" #: standalone/net_monitor:472 #, fuzzy, c-format msgid "No internet connection configured" msgstr "இணையத்ெதாடர்பு வடிவமைக்கப்பாளன்" #: standalone/printerdrake:76 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "உள்ளமைக் அச்சுப்ெபறி" #: standalone/printerdrake:128 #, fuzzy, c-format msgid "%s Printer Management Tool" msgstr "அச்சுப்ெபாறி பகிர்தல்" #: standalone/printerdrake:142 standalone/printerdrake:143 #: standalone/printerdrake:144 standalone/printerdrake:145 #: standalone/printerdrake:153 standalone/printerdrake:154 #: standalone/printerdrake:158 #, c-format msgid "/_Actions" msgstr "/_செயல்கள்" #: standalone/printerdrake:142 standalone/printerdrake:154 #, c-format msgid "/_Add Printer" msgstr "/_பதய அசசபபறயச சர" #: standalone/printerdrake:143 #, fuzzy, c-format msgid "/Set as _Default" msgstr " (கொடாநிலை)" #: standalone/printerdrake:144 #, c-format msgid "/_Edit" msgstr "/_தொகு" #: standalone/printerdrake:145 #, c-format msgid "/_Delete" msgstr "/_அழி" #: standalone/printerdrake:146 #, c-format msgid "/_Expert mode" msgstr "/_அறிஞர் முறைமை" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "/_புதிதாக்கு" #: standalone/printerdrake:158 #, c-format msgid "/_Configure CUPS" msgstr "/CUPS-ஐ _வடிவமைக்கவும்" #: standalone/printerdrake:171 #, fuzzy, c-format msgid "/Configure _Auto Administration" msgstr "தொலைவு மேலாண்மை" #: standalone/printerdrake:194 #, c-format msgid "Search:" msgstr "தேடு:" #: standalone/printerdrake:197 #, c-format msgid "Apply filter" msgstr "" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:224 standalone/printerdrake:231 #, fuzzy, c-format msgid "Printer Name" msgstr "அச்சுப்ெபாறி சாரையின் பெயர்" #: standalone/printerdrake:224 #, c-format msgid "Connection Type" msgstr "இணைப்பு வகை" #: standalone/printerdrake:231 #, c-format msgid "Server Name" msgstr "சேவகன் பெயர்" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:239 #, fuzzy, c-format msgid "Add Printer" msgstr "அச்சுப்ெபாறி" #: standalone/printerdrake:239 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "குழுவைச் சேர்" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:242 #, fuzzy, c-format msgid "Set as default" msgstr "கொடாநிலை" #: standalone/printerdrake:242 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "கொடாநிலை அச்சுப்ெபாறியாக அமை" #: standalone/printerdrake:245 #, fuzzy, c-format msgid "Edit selected printer" msgstr " %s கண்டுபிடிக்கப்பட்டுள்ளது" #: standalone/printerdrake:248 #, fuzzy, c-format msgid "Delete selected printer" msgstr "நுழைவிடத்ைத நீக்கு" #: standalone/printerdrake:251 #, fuzzy, c-format msgid "Refresh the list" msgstr "பயனரின் பட்டியல்" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:254 #, fuzzy, c-format msgid "Configure CUPS" msgstr "X-ஐ வடிவமைக்கவும்" #: standalone/printerdrake:254 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "அச்சுப்ெபாறியை மாற்றியமை" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Enabled" msgstr "இயலுமைப்படுத்தியது" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Disabled" msgstr "முடமாகியது" #: standalone/printerdrake:596 #, c-format msgid "Authors: " msgstr "ஆசிரியர்கள்: " #. -PO: here %s is the version number #: standalone/printerdrake:606 #, fuzzy, c-format msgid "Printer Management %s" msgstr "அச்சுப்ெபாறி பகிர்தல்" #: standalone/scannerdrake:51 #, fuzzy, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். இதை நிறுவ வேண்டுமா?" #: standalone/scannerdrake:55 #, fuzzy, c-format msgid "Aborting Scannerdrake." msgstr "வருடியை தேர்வுச் செய்யுங்கள்" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, fuzzy, c-format msgid "Searching for configured scanners..." msgstr "உள்ளமைக் அச்சுப்பொறி" #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, fuzzy, c-format msgid "Searching for new scanners..." msgstr "உள்ளமைக் அச்சுப்பொறி" #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "" #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "" #: standalone/scannerdrake:104 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s என்ற கருவி %s யில் இணைக்கப்பட்டுள்ளது.இதை வடிவமைக்கட்டுமா?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: standalone/scannerdrake:131 #, fuzzy, c-format msgid "Select a scanner model" msgstr "வருடியை தேர்வுச் செய்யுங்கள்" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, fuzzy, c-format msgid "Detected model: %s" msgstr "கண்டுபிடிக்கப்பட்ட மாடல்: %s %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "துறை: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, fuzzy, c-format msgid "The %s is not supported under Linux." msgstr "உங்கள் %s வருடி தற்ேபாது வேலைச் செய்யாது" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, fuzzy, c-format msgid "Select firmware file" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, fuzzy, c-format msgid "Select firmware file for the %s" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/scannerdrake:276 #, fuzzy, c-format msgid "Could not install the firmware file for the %s!" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, fuzzy, c-format msgid "The %s is unsupported" msgstr "உங்கள் %s வருடி தற்ேபாது வேலைச் செய்யாது" #: standalone/scannerdrake:304 #, fuzzy, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "உங்கள் %s வருடி வடிவமைக்கப்பட வேண்டும்\n" "அதற்கு டிரேக்அச்சு நிரலை பயன்படுத்துங்கள்" #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, fuzzy, c-format msgid "Please select the device where your %s is attached" msgstr "" "உங்கள் %s வருடி வடிவமைக்கப்படவில்லை \n" "சாதனத்தை சரியாகத் தேர்வுச் செய்யுங்கள்" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "சாதனத்ைத தேர்வுச் செய்யுங்கள்" #: standalone/scannerdrake:347 #, fuzzy, c-format msgid "Searching for scanners..." msgstr "உள்ளமைக் அச்சுப்பொறி" #: standalone/scannerdrake:383 #, fuzzy, c-format msgid "Setting up kernel modules..." msgstr "கூறுகளை நீக்கிவிடு" #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, fuzzy, c-format msgid "Attention!" msgstr "ஈர்ப்பு" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, fuzzy, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "உங்கள் %s வருடி வடிவமைக்கப்பட்டுவிட்டது\n" "நீங்கள் பல்லூடகம்-வரைவியல்-வருடி என்ற நிரலை பயன்படுத்துங்கள்" #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, fuzzy, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "உங்கள் %s வருடி வடிவமைக்கப்பட்டுவிட்டது\n" "நீங்கள் பல்லூடகம்-வரைவியல்-வருடி என்ற நிரலை பயன்படுத்துங்கள்" #: standalone/scannerdrake:431 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "நேரடியாக கணிணியுடன் இணைந்துள்ளது" #: standalone/scannerdrake:432 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "நேரடியாக கணிணியுடன் இணைந்துள்ளது" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: standalone/scannerdrake:452 #, fuzzy, c-format msgid "Search for new scanners" msgstr "உள்ளமைக் அச்சுப்பொறி" #: standalone/scannerdrake:458 #, fuzzy, c-format msgid "Add a scanner manually" msgstr "கைநூலில் தேடு" #: standalone/scannerdrake:465 #, fuzzy, c-format msgid "Install/Update firmware files" msgstr "கோப்ேபா தேர்வுச் செய்" #: standalone/scannerdrake:471 #, fuzzy, c-format msgid "Scanner sharing" msgstr "கோப்பு பகிர்தல்" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, fuzzy, c-format msgid "All remote machines" msgstr "தொலைவு அச்சுப்பொறி" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: standalone/scannerdrake:588 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "கோப்பு பகிர்தல்" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "உள்ளமைக் அச்சுப்பொறி" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, fuzzy, c-format msgid "Add host" msgstr "பயனரைச் சேர்" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, fuzzy, c-format msgid "Edit selected host" msgstr " %s கண்டுபிடிக்கப்பட்டுள்ளது" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, fuzzy, c-format msgid "Remove selected host" msgstr "நுழைவிடத்தை நீக்கு" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: standalone/scannerdrake:782 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "காலியாக உள்ள இடத்தை பயன்படுத்து" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, fuzzy, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். இதை நிறுவ வேண்டுமா?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: standalone/service_harddrake:105 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "\"%s\" வகை சாதனம் ஒன்று பிரிக்கப்பட்டுள்ளது:\n" #: standalone/service_harddrake:106 #, c-format msgid "- %s was removed\n" msgstr "" #: standalone/service_harddrake:109 #, fuzzy, c-format msgid "Some devices were added: %s\n" msgstr " சில சாதனங்கள் சேர்க்கப்பட்டுள்ளது:\n" #: standalone/service_harddrake:110 #, c-format msgid "- %s was added\n" msgstr "" #: standalone/service_harddrake:206 #, c-format msgid "Hardware probing in progress" msgstr "வன்ெபாருள் தேடுதல் நடைபெறுகிறது" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "" #: standalone/service_harddrake_confirm:8 #, fuzzy, c-format msgid "Do you want to run the appropriate config tool?" msgstr "உங்கள் வடிவமைப்ைப சோதித்து பார்க்க வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]" #: steps.pm:14 #, c-format msgid "Language" msgstr "உங்கள் மொழியைத் தேர்வுச் செய்க" #: steps.pm:15 #, c-format msgid "License" msgstr "அனுமதி" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "எலியை வடிவமையுங்கள்" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "வன்தட்டு கண்டுபிடித்தல்" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "நிறுவல் வகையைத் தேர்வுச் செய்க" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "உங்கள் விசைப்பலகையை தேர்வுச் செய்யுங்கள்" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "வகிர் ெசய்தல்" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "வகிர்களை வடிவூட்டுங்கள்" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "நிறுவ வேண்டிய பொதிகளை தேர்வுச் செய்யுங்கள்" #: steps.pm:24 #, c-format msgid "Install system" msgstr "இயக்கத்ைத நிறுவுங்கள்" #: steps.pm:25 #, fuzzy, c-format msgid "Administrator password" msgstr "உங்கள் கடவுச்ெசால்ைல உருவாக்கவும்" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "பயனரைச் சேருங்கள்- இது முக்கியம்" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "வலையமைப்பாக்கங்களை வடிவமையுங்கள்" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "துவங்குநிரலை நிறுவுங்கள்" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "X-ஐ வடிவமைக்கவும்" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "சேவைகளை வடிவமையுங்கள்" #: steps.pm:32 #, fuzzy, c-format msgid "Install updates" msgstr "இயக்கத்திற்கு தேவையான நிகழ்நிலைப்படுத்தப்பட்ட பொதிகளை நிறுவுதல்" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "நிறுவல் நிரலை விட்டு வெளிச்ெசல்" #: ugtk2.pm:899 #, c-format msgid "Is this correct?" msgstr "இது சரியா?" #: ugtk2.pm:959 #, fuzzy, c-format msgid "No file chosen" msgstr "கோப்பு தேர்வாளர்" #: ugtk2.pm:961 #, fuzzy, c-format msgid "You have chosen a file, not a directory" msgstr "அதுபோன்ற கோப்போ அடைவோ இல்லை" #: ugtk2.pm:963 #, fuzzy, c-format msgid "You have chosen a directory, not a file" msgstr "'/'னின் பெயர் கோப்பகத்துக்கு மட்டுமே, விசைக்கு அல்ல " #: ugtk2.pm:965 #, fuzzy, c-format msgid "No such directory" msgstr "அடைவு இல்லை" #: ugtk2.pm:965 #, fuzzy, c-format msgid "No such file" msgstr "`%s' கோப்பு கிரையாது\n" #: ugtk2.pm:1046 #, c-format msgid "Expand Tree" msgstr "கிளைகளை விரி" #: ugtk2.pm:1047 #, c-format msgid "Collapse Tree" msgstr "கிளைகளை சுருக்கு" #: ugtk2.pm:1048 #, c-format msgid "Toggle between flat and group sorted" msgstr "தட்ைட மற்றும் கிளை வரிசைக்குமிடையே மாற்றியமை" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s நிறுவப்படவில்ைல\n" "\"அடுத்து\" என்றால் நிறுவப்படும்,\n" "இல்ைலயெனில் \"தவிர்\" என்றால் நிறுவப்படாமல் வெளிச்ெசல்லும்" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "நிறுவுதலில் பிழை நேர்ந்துள்ளது" #~ msgid "http://www.mandrivalinux.com/en/errata.php3" #~ msgstr "http://www.mandrivalinux.com/en/errata.php3" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Dvorak (Esperanto)" #~ msgstr "வோரக்(நார்ேவ)" #~ msgid "" #~ "_: keyboard\n" #~ "Lithuanian AZERTY (old)" #~ msgstr "லிதுவேனிய-பழைய" #~ msgid "" #~ "_: keyboard\n" #~ "Lithuanian \"phonetic\" QWERTY" #~ msgstr "லிதுவேனிய-ஒலியமைப்பு குவர்ட்டி" #, fuzzy #~ msgid "Default Idmap " #~ msgstr "மேசை" #~ msgid "Please wait, preparing installation..." #~ msgstr "தயவுசெய்து காத்திருக்கவும்..நிறுவுதல் தொடங்கப்ேபாகிறது" #~ msgid "Installing package %s" #~ msgstr "%s பொதி நிறுவப்படுகிறது" #, fuzzy #~ msgid "Welcome to Mandriva Linux!" #~ msgstr "மாண்டடிரேக் லினக்ஸுக்கு வருக" #, fuzzy #~ msgid "Welcome to the world of open source!" #~ msgstr "திறந்த மூலநிரல் உலகுக்கு வருக" #, fuzzy #~ msgid "Mandriva Products" #~ msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #, fuzzy #~ msgid "Choose your Favorite Desktop Environment" #~ msgstr "உங்கள் கோப்பமைப்புக்கு மறைக்குறியீட்டுச் சாவியை தேர்வுச் செய்" #, fuzzy #~ msgid "OpenOffice.org" #~ msgstr "ஓபன்ஆபிஸ்-கணியன்" #, fuzzy #~ msgid "Kontact" #~ msgstr "மாண்ட்ரிவ கிளப்" #~ msgid "Surf the Internet" #~ msgstr "இணையத்தில் உலாவு" #, fuzzy #~ msgid "\t* Transfer files with KBear." #~ msgstr "FTP மூலம் கோப்புகளைப் பரிமாற்று" #~ msgid "Development Environments" #~ msgstr "உருவாக்ககம்" #, fuzzy #~ msgid "Development Editors" #~ msgstr "உருவாக்கம்" #, fuzzy #~ msgid "Development Languages" #~ msgstr "உருவாக்கம்" #, fuzzy #~ msgid "\t* Scripting languages:" #~ msgstr "அச்சு மேலாளர்" #, fuzzy #~ msgid "Development Tools" #~ msgstr "உருவாக்கம்" #, fuzzy #~ msgid "Servers" #~ msgstr "இயக்கநிரல்" #~ msgid "Mandriva Linux Control Center" #~ msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #, fuzzy #~ msgid "Online Store" #~ msgstr "மாண்ட்ேரக் கட்டுப்பட்டு மையம்" #~ msgid "Mandriva Club" #~ msgstr "மாண்ட்ரிவ கிளப்" #~ msgid "Mandriva Online" #~ msgstr "மாண்ட்ேரக்இணைய" #~ msgid "Mandriva Expert" #~ msgstr "மாண்ட்ரிவ எக்ஸ்பர்ட்" #~ msgid "Mode:" #~ msgstr "வகை:" #~ msgid "Set" #~ msgstr "அமை" #~ msgid "Rescan" #~ msgstr "மறுவருடல்" #~ msgid "Status" #~ msgstr "நிலை" #~ msgid "Disconnect" #~ msgstr "இணைப்பை துண்டி" #, fuzzy #~ msgid "ProgressBar color selection" #~ msgstr "முனைய போன்மி" #~ msgid "Connect to the Internet" #~ msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து" #~ msgid "" #~ "The most common way to connect with adsl is pppoe.\n" #~ "Some connections use PPTP, a few use DHCP.\n" #~ "If you do not know, choose 'use PPPoE'" #~ msgstr "" #~ "பொதுவாக adsl மூலம் இணையத்ேதடு தொடர்பு ஏற்படுத்த.\n" #~ "pppoe பயன்படுத்தப்படும்.வெகு சில dhcp பயன்படுத்தும்\n" #~ "உங்களுக்கு சரியாக தெரியவில்ைல என்றால் pppoe பயன்படுத்து" #~ msgid "Do not print any test page" #~ msgstr "சோதனை பக்கத்தில் ஏதும் அச்சிடாதே" #~ msgid "Printer on SMB/Windows 95/98/NT server" #~ msgstr "தொலைவு சம்பா சேவையகத்தில் உள்ள அச்சுப்ெபாறி" #, fuzzy #~ msgid "Found printer on %s..." #~ msgstr "அச்சுபொறி நீக்கப்படுகிறது \"%s\"..." #~ msgid "dhcpd Config..." #~ msgstr "dhcpd வடிவமைக்கப்பு" #, fuzzy #~ msgid "Interactive intrusion detection" #~ msgstr "கணக்கு வரைவியல்" #, fuzzy #~ msgid "Active Firewall: intrusion detected" #~ msgstr "நெருப்புச்சுவர் வடிவமைப்பு காணப்பட்டுள்ளது" #, fuzzy #~ msgid "Do you want to blacklist the attacker?" #~ msgstr "ஆட்டத்தை நிறுத்த வேண்டுமா ?" #~ msgid "Grub" #~ msgstr "கிரப்" #, fuzzy #~ msgid "Local Network adress" #~ msgstr "C-Class Local Network" #~ msgid "Configuring scripts, installing software, starting servers..." #~ msgstr "பொதிகள் நிறுவப்பட்டு வடிவமைக்கப்படுகிறது..." #~ msgid "drakfloppy" #~ msgstr "டிரேக்நெகிழ்தட்டு" #, fuzzy #~ msgid "Boot disk creation" #~ msgstr "தொடங்கு தட்ட உருவாக்கம்" #~ msgid "General" #~ msgstr "பொது" #, fuzzy #~ msgid "Kernel version" #~ msgstr "கரு வெளியீடு" #~ msgid "Preferences" #~ msgstr "விருப்பங்கள்" #, fuzzy #~ msgid "Advanced preferences" #~ msgstr "அலாதியான கட்டுப்பாடுகள்" #~ msgid "Size" #~ msgstr "அளவு" #~ msgid "force" #~ msgstr "வலிந்து செய்" #~ msgid "omit raid modules" #~ msgstr " raid கூறுகளை சேர்க்காதே" #~ msgid "if needed" #~ msgstr "தேவைப்பட்டால்" #~ msgid "omit scsi modules" #~ msgstr "scsi கூறுகளை சேர்க்காதே" #~ msgid "Add a module" #~ msgstr "கூற்ைறச் சேர்" #~ msgid "Remove a module" #~ msgstr "கூறுகளை நீக்கிவிடு" #~ msgid "Be sure a media is present for the device %s" #~ msgstr " %s சாதனத்தில் ஊடகம் உள்ளதா எனச் சரிபார்" #~ msgid "" #~ "There is no medium or it is write-protected for device %s.\n" #~ "Please insert one." #~ msgstr "" #~ "%s சாதனத்தில் ஊடகம் இல்ைல அல்லது எழுத முடியாத நிலையில் இருக்கலாம். தயவுசெய்து " #~ "ஊடகத்ைத உள்ளீடு செய்" #, fuzzy #~ msgid "Floppy creation completed" #~ msgstr "தொடர்பு வேகம்: " #, fuzzy #~ msgid "" #~ "Unable to properly close mkbootdisk:\n" #~ "\n" #~ "%s" #~ msgstr "" #~ "mkbootdisk மூட மடியவில்ைல: \n" #~ " %s \n" #~ " %s" #~ msgid "You can not use a LVM Logical Volume for mount point %s" #~ msgstr "%s என்ற ஏற்றப் புள்ளியில் LVM வகிர் ஆகையால் ஏற்ற முடியாது" #, fuzzy #~ msgid "" #~ "You've selected a LVM Logical Volume as root (/).\n" #~ "The bootloader is not able to handle this without a /boot partition.\n" #~ "Please be sure to add a /boot partition" #~ msgstr "" #~ "உங்கள் root (/) வகிர் RAID வகையில் உள்ளது. நீங்கள் லிலோ பயன்படுத்தினால் அது வேலை " #~ "செய்ய. /boot தேவை. அதனால் /boot உருவாக்கவும்" #~ msgid "use PPPoE" #~ msgstr " pppoe பயன்படுத்து" #~ msgid "use PPTP" #~ msgstr "pptp பயன்படுத்து" #~ msgid "use DHCP" #~ msgstr "dhcp பயன்படுத்து" #, fuzzy #~ msgid "Alcatel Speedtouch USB" #~ msgstr "அல்காடெல் ஸ்பிட்டச் -Alcatel speedtouch usb" #, fuzzy #~ msgid " - detected" #~ msgstr "கண்டுபிடிக்கப்பட்டுள்ளது" #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "குேனாம், ஐஸ்விம் ஆகிய பயன்படுத்துவதற்கு எளிதான வரைவியல்வழி மேலாளர்கள்" #~ msgid "" #~ "Warning, another Internet connection has been detected, maybe using your " #~ "network" #~ msgstr "" #~ "எச்சரிக்ைக, மற்றுமொறு இணையத்ெதாடர்பு கண்டுபிடிக்கப்பட்டுள்ளது. இது அநேகமாக உங்கள் " #~ "வலையமைப்பாக்கத்ைத பயன்படுத்தலாம்" #, fuzzy #~ msgid "PXE Server Configuration" #~ msgstr "வலையமைப்பாக்க வடிவமைப்பு" #, fuzzy #~ msgid "Installation Server Configuration" #~ msgstr "வலையமைப்பாக்க வடிவமைப்பு" #, fuzzy #~ msgid "" #~ "You are about to configure your computer to install a PXE server as a " #~ "DHCP server\n" #~ "and a TFTP server to build an installation server.\n" #~ "With that feature, other computers on your local network will be " #~ "installable using this computer as source.\n" #~ "\n" #~ "Make sure you have configured your Network/Internet access using " #~ "drakconnect before going any further.\n" #~ "\n" #~ "Note: you need a dedicated Network Adapter to set up a Local Area Network " #~ "(LAN)." #~ msgstr "" #~ "உங்கள் கணினி இணையத் தொடர்பு பரிமாறியாக.\n" #~ " வடிவமைக்கப்பட முடியும். உங்களுக்கு இது வேண்டுமா பொதுவாக நீங்கள் பரிமாறியை வீட்டில் " #~ "பயன்படுத்த தேவையில்ைல.ஆதலால் இல்ைல என்ற பதிலை தேர்வுச்செய்யுங்கள்\n" #~ "இதற்கு ஒரு தனிப்பட்ட வலையமைப்பு அட்ைட தேவை" #~ msgid "No network adapter on your system!" #~ msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல" #~ msgid "Choose the network interface" #~ msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்" #, fuzzy #~ msgid "" #~ "Please choose which network interface will be used for the dhcp server." #~ msgstr "எந்த வலையமைப்பு அட்ைட உங்களை இணையத்துடன் இணைத்துள்ளது" #, fuzzy #~ msgid "Interface %s (on network %s)" #~ msgstr " %s என்ற வலையமைப்பு அட்ைட( %s என்ற இயக்க நிரல் பயன்பாட்டில் உள்ளது) " #, fuzzy #~ msgid "Installation image directory" #~ msgstr "Xpmac(காட்சியமைப்பு அட்ைடயின் இயக்க நிரல்)" #, fuzzy #~ msgid "No image found" #~ msgstr "லிலோ தகவலை காண முடியவில்ைல" #, fuzzy #~ msgid "Location of auto_install.cfg file" #~ msgstr "தாநிறுவலுக்கான துவக்க வட்டு உருவாக்கப்படுகிறது" #~ msgid "Internet Connection Sharing currently disabled" #~ msgstr "இணையத் தொடர்பு பரிமாறி தற்ேபாது முடமாக்கப்பட்டுள்ளது." #~ msgid "Enabling servers..." #~ msgstr "பரிமாறிகளை செயல்படுத்து" #~ msgid "Internet Connection Sharing currently enabled" #~ msgstr "இணையத் தொடர்பு பரிமாறி வடிவமைக்கப்பட்டுவிட்டது" #~ msgid "Interface %s (using module %s)" #~ msgstr " %s என்ற வலையமைப்பு அட்ைட( %s என்ற இயக்க நிரல் பயன்பாட்டில் உள்ளது) " #~ msgid "Interface %s" #~ msgstr " %s என்ற வலையமைப்பு அட்ைட" #~ msgid "Network interface already configured" #~ msgstr "வலையமைப்பு அட்ைட ஏற்கனவே வடிவமைக்கப்பட்டுவிட்டது" #~ msgid "" #~ "Warning, the network adapter (%s) is already configured.\n" #~ "\n" #~ "Do you want an automatic re-configuration?\n" #~ "\n" #~ "You can do it manually but you need to know what you're doing." #~ msgstr "" #~ "வலையமைப்பு அட்ைட(%s) ஏற்கனவே வடிவமைக்கப்பட்டுவிட்டது\n" #~ "\n" #~ "நீங்கள் மறுவடிவமைக்க விரும்புகிறீர்களா\n" #~ "\n" #~ "வாழ்த்துக்கள்" #~ msgid "Show current interface configuration" #~ msgstr "தற்ேபாதைய வடிவமைப்ேபாக் காட்டு" #, fuzzy #~ msgid "Current interface configuration" #~ msgstr "தற்ேபாதைய வடிவமைப்ேபாக் காட்டு" #~ msgid "" #~ "Current configuration of `%s':\n" #~ "\n" #~ "Network: %s\n" #~ "IP address: %s\n" #~ "IP attribution: %s\n" #~ "Driver: %s" #~ msgstr "" #~ "`%s' தற்ேபாதைய வடிவமைப்பு:\n" #~ "\n" #~ "Network: %s\n" #~ "IP address: %s\n" #~ "IP attribution: %s\n" #~ "Driver: %s" #~ msgid "(This) DHCP Server IP" #~ msgstr "DHCP பரிமாறியின் IP" #~ msgid "Re-configure interface and DHCP server" #~ msgstr "வலையமைப்பு அட்ைடயையும் DHCP பரிமாறியையும் மாற்றியமை" #~ msgid "The Local Network did not finish with `.0', bailing out." #~ msgstr "பிழை நேர்ந்துள்ளது மன்னிக்கவும்" #, fuzzy #~ msgid "hd" #~ msgstr "சாட்" #, fuzzy #~ msgid "tape" #~ msgstr "நாடா" #, fuzzy #~ msgid "first step creation" #~ msgstr "தொடங்கு தட்ட உருவாக்கம்" #, fuzzy #~ msgid "choose image file" #~ msgstr "கோப்பு ஒன்றைத் தேர்வுச் செய்" #, fuzzy #~ msgid "Configure bootsplash picture" #~ msgstr "தொடங்குபட முன்னோட்டத்ைத உருவாக்க முடியவில்ைல" #~ msgid "Preview" #~ msgstr "முன்தோற்றம்" #, fuzzy #~ msgid "Choose color" #~ msgstr "திரையகத்ைத தேர்வுச் செய்" #~ msgid "Notice" #~ msgstr "குறிப்பு" #, fuzzy #~ msgid "Generating preview..." #~ msgstr "சாதனங்களை கண்டுபிடித்தல்" #~ msgid "No floppy drive available" #~ msgstr "நெகிழ் வட்டகம் ஏதும் இல்ைல" #~ msgid "Please insert the Update Modules floppy in drive %s" #~ msgstr "தயவுசெய்து நிகழ்நிலைப்படுத்தப்பட்ட வட்ைட மீண்டும் %s இயக்கியில் போடவும்" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "யுகோஸ்சுலோவிய" #~ msgid "No network card" #~ msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல " #, fuzzy #~ msgid "Use already installed driver (%s)" #~ msgstr "(%s ஏற்கனவே சேர்க்கப்பட்டுவிட்டது)" #, fuzzy #~ msgid "You've not selected any font" #~ msgstr "நுழைவிடத்தை நீக்கு" #~ msgid "No browser available! Please install one" #~ msgstr "மேலோடி ஏதுமில்ைல.தயவுசெய்து நிறுவவும்" #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "நெகிழ்தட்ைட செருகுங்கள்\n" #~ "இந்த தட்டில் இருக்கும் தகவலனைத்ம் அழிந்துவிடும்" #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "FAT கோப்பமைப்பில் வடிவூட்டப்பட்ட நெகிழ்தட்ைட %s யின் உள்ளே போடவும்" #~ msgid "This floppy is not FAT formatted" #~ msgstr "FAT கோப்பமைப்பில் வடிவூட்டப்பட்டவில்ைல" #~ msgid "" #~ "To use this saved packages selection, boot installation with ``linux " #~ "defcfg=floppy''" #~ msgstr "" #~ "நீங்கள் தற்ேபாது நிறுவிய பொதித் தேர்வுகளுடன் வேறு கணினிகளில் நிறுவ, நிறுவல் " #~ "தொடங்கும் போது ``linux defcfg=floppy'' என உள்ளீடு செய்யவும்" #~ msgid "Load/Save on floppy" #~ msgstr "நெகிழ்வட்டில் சேமிக்கவும்" #~ msgid "" #~ "Please choose load or save package selection on floppy.\n" #~ "The format is the same as auto_install generated floppies." #~ msgstr "" #~ "தயவுசெய்து உங்கள் பொதி தேர்ைவ ஒரு நெகிழ்வட்டில் சேமிக்கவும்.\n" #~ "இவ்வாறு சேமிக்கும் முறை தானியங்கி-நிறுவலை ஒத்து இருக்கும்" #~ msgid "Load from floppy" #~ msgstr "நெகிழ்வட்டில் இருந்து ஏற்றுங்கள்" #~ msgid "Save on floppy" #~ msgstr "நெகிழ்வட்டில் சேமியுங்கள்" #~ msgid "Package selection" #~ msgstr "பொதிகள் தேர்வு" #~ msgid "Loading from floppy" #~ msgstr "நெகிழ்வட்டில் இருந்து ஏற்றுப்படுகிறது" #~ msgid "Insert a floppy containing package selection" #~ msgstr "பொதிகள் தேர்ைவக் கொண்ட நெகிழ்வட்ைட உள்ளீடு செய்யவும்" #~ msgid "Application:" #~ msgstr "நிரல்: " #~ msgid "Release: " #~ msgstr "வெளியீடு: " #, fuzzy #~ msgid "Summary: " #~ msgstr "உரை" #, fuzzy #~ msgid "Submit kernel version" #~ msgstr "கரு வெளியீடு" #, fuzzy #~ msgid "connecting to %s..." #~ msgstr "பக்சிலாவோடு இணைகிறது" #, fuzzy #~ msgid "Loading printer configuration... Please wait" #~ msgstr "அச்சுப்ெபாறியை வடிவமைப்பு மாற்றியமைக்க" #, fuzzy #~ msgid "The " #~ msgstr "உருகரு" #, fuzzy #~ msgid "%s (was %s)" #~ msgstr "%s (துறை %s)" #, fuzzy #~ msgid "Root password" #~ msgstr "கடவுச்ெசால் ஏதுமில்ைல" #, fuzzy #~ msgid "Do you want to recover your system?" #~ msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்" #~ msgid "Move" #~ msgstr "நகர்த்து" #~ msgid "Which disk do you want to move it to?" #~ msgstr "நீங்கள் எந்த வட்டிற்கு மாற்ற போகிறீர்கள்?" #~ msgid "Sector" #~ msgstr "வில்" #~ msgid "Which sector do you want to move it to?" #~ msgstr "நீங்கள் எந்த வில்லிற்கு மாற்ற போகிறீர்கள்?" #~ msgid "Moving" #~ msgstr "மாற்றப்படுகிறது" #~ msgid "Moving partition..." #~ msgstr "வகிர்கள் மாற்றப்படுகிறது ..." #~ msgid "Error opening %s for writing: %s" #~ msgstr " %s இதை திறக்க முடியவில்ைல,%s இதை எழுதுவதற்காக திறக்க வேண்டும்" #~ msgid "OK" #~ msgstr "சரி" #~ msgid "Czech (QWERTZ)" #~ msgstr "செக்(குவர்டி)" #~ msgid "German" #~ msgstr "ெஜர்மன்" #~ msgid "Dvorak" #~ msgstr "வோராக்" #~ msgid "Spanish" #~ msgstr "ஸ்பானிஷ்" #~ msgid "Finnish" #~ msgstr "பின்னிஷ்" #~ msgid "French" #~ msgstr "பிரஞ்சு " #~ msgid "Norwegian" #~ msgstr "நார்ேவ " #~ msgid "Polish" #~ msgstr "பொலிஸ்" #~ msgid "Russian" #~ msgstr "ரஷியன்" #~ msgid "Swedish" #~ msgstr "சுவிடிஷ்" #~ msgid "Albanian" #~ msgstr "அல்பேனியன்" #~ msgid "Armenian (old)" #~ msgstr "ஆர்மினியன்(பழைய)" #~ msgid "Armenian (typewriter)" #~ msgstr "ஆர்மினியன்(தட்டச்சு)" #~ msgid "Armenian (phonetic)" #~ msgstr "ஆர்மினியன்(ஒலியமைப்பு)" #~ msgid "Azerbaidjani (latin)" #~ msgstr "அசர்பைஜான்" #~ msgid "Belgian" #~ msgstr "பெல்ஜியன்" #~ msgid "Bengali" #~ msgstr "வங்காளம்" #~ msgid "Bulgarian (phonetic)" #~ msgstr "பல்ேகரிய(ஒலியமைப்பு)" #~ msgid "Bulgarian (BDS)" #~ msgstr "பல்ேகரிய(பிடிஸ)" #~ msgid "Brazilian (ABNT-2)" #~ msgstr "பிரேசில்" #~ msgid "Bosnian" #~ msgstr "போஸ்னியா" #~ msgid "Belarusian" #~ msgstr "பேலாருஸ்" #~ msgid "Swiss (German layout)" #~ msgstr "சுவிஷ்(ெஜர்மன்)" #~ msgid "Swiss (French layout)" #~ msgstr "சுவிஷ்(பிரெஞ்சு)" #~ msgid "Czech (QWERTY)" #~ msgstr "செக்(குவர்ட்டி)" #~ msgid "German (no dead keys)" #~ msgstr "ெஜர்மன்(ெடட் விைச இல்லாமல்" #~ msgid "Devanagari" #~ msgstr "ேதவநாகரி" #~ msgid "Danish" #~ msgstr "டச்சு" #~ msgid "Dvorak (US)" #~ msgstr "வோரக்(US)" #~ msgid "Dvorak (Norwegian)" #~ msgstr "வோரக்(நார்ேவ)" #~ msgid "Dvorak (Swedish)" #~ msgstr "வோரக்-சுவிடிசு " #~ msgid "Estonian" #~ msgstr "எஸ்ேதானியா" #~ msgid "Georgian (\"Russian\" layout)" #~ msgstr "ஜார்ஜியா(\"Russian\" layout)" #~ msgid "Georgian (\"Latin\" layout)" #~ msgstr "ஜார்ஜியா" #~ msgid "Greek" #~ msgstr "கிரேக்கம் " #~ msgid "Gujarati" #~ msgstr "குஜராத்தி" #~ msgid "Hungarian" #~ msgstr "அங்கேரிய " #~ msgid "Croatian" #~ msgstr "குரேசிய " #~ msgid "Israeli" #~ msgstr "இஸ்ரலேிய" #~ msgid "Israeli (Phonetic)" #~ msgstr "இஸ்ரலேிய(ஒலியமைப்பு)" #~ msgid "Iranian" #~ msgstr "இரானிய" #~ msgid "Icelandic" #~ msgstr "ஐஸ்லாந்து " #~ msgid "Italian" #~ msgstr "இத்தாலிய " #~ msgid "Japanese 106 keys" #~ msgstr "ஜப்பானிய 106 விசை" #~ msgid "Korean keyboard" #~ msgstr "கொரிய விசைப்பலகை" #~ msgid "Latin American" #~ msgstr "லத்தின் அமெரிக்க" #~ msgid "Laotian" #~ msgstr "லாவோஸ்" #~ msgid "Lithuanian AZERTY (old)" #~ msgstr "லிதுவேனிய-பழைய" #~ msgid "Lithuanian AZERTY (new)" #~ msgstr "லிதுவேனிய-புதிய" #~ msgid "Lithuanian \"number row\" QWERTY" #~ msgstr "லிதுவேனிய-குவர்ட்டி" #~ msgid "Lithuanian \"phonetic\" QWERTY" #~ msgstr "லிதுவேனிய-ஒலியமைப்பு குவர்ட்டி" #~ msgid "Latvian" #~ msgstr "லாட்விய" #~ msgid "Malayalam" #~ msgstr "மலையாளம்" #~ msgid "Macedonian" #~ msgstr "மாசிடோனிய" #~ msgid "Myanmar (Burmese)" #~ msgstr "மியான்மார்(பர்மீஸ்)" #~ msgid "Mongolian (cyrillic)" #~ msgstr "மங்ேகாலியன்(சிரிலிக்)" #~ msgid "Maltese (UK)" #~ msgstr "மால்டீஸ்(UK)" #~ msgid "Maltese (US)" #~ msgstr "மால்டீஸ்(US)" #~ msgid "Dutch" #~ msgstr "டச்சு" #~ msgid "Polish (qwerty layout)" #~ msgstr "பொலிஷ்(குவர்ட்டி)" #~ msgid "Polish (qwertz layout)" #~ msgstr "பொலிஷ்(குவார்ட்ஸ்)" #~ msgid "Portuguese" #~ msgstr "போர்த்துகிசிய" #~ msgid "Canadian (Quebec)" #~ msgstr "கனடிய(Quebec)" #~ msgid "Romanian (qwertz)" #~ msgstr "ரோமேனிய(குவார்ட்ஸ்)" #~ msgid "Romanian (qwerty)" #~ msgstr "ரோமேனிய(குவர்ட்டி)" #~ msgid "Russian (Phonetic)" #~ msgstr "ரஷிய(ஒலியமைப்பு)" #~ msgid "Slovenian" #~ msgstr "சுலோவெனிய" #~ msgid "Slovakian (QWERTZ)" #~ msgstr "சுலோவெனிய(குவார்ட்ஸ்)" #~ msgid "Slovakian (QWERTY)" #~ msgstr "சுலோவெனிய(குவர்ட்டி)" #~ msgid "Serbian (cyrillic)" #~ msgstr "செர்பிய" #~ msgid "Tamil (ISCII-layout)" #~ msgstr "தமிழ்(இஸ்கி) " #~ msgid "Tamil (Typewriter-layout)" #~ msgstr "தமிழ்(தட்டச்சு)" #~ msgid "Thai keyboard" #~ msgstr "தாய் விசைப்பலகை" #~ msgid "Tajik keyboard" #~ msgstr "தாஜிக் விசைப்பலகை" #~ msgid "Turkish (traditional \"F\" model)" #~ msgstr "துருக்கிய " #~ msgid "Turkish (modern \"Q\" model)" #~ msgstr "புது துருக்கிய " #~ msgid "Ukrainian" #~ msgstr "உக்ேரனிய" #~ msgid "Vietnamese \"numeric row\" QWERTY" #~ msgstr "வியட்நாமிய " #~ msgid "Yugoslavian (latin)" #~ msgstr "யுகோஸ்சுலோவிய" #~ msgid "Enable multiple profiles" #~ msgstr "பல பயனர் குறிப்புகளை செயல்படுத்து" #~ msgid "" #~ "You now have the opportunity to download updated packages. These " #~ "packages\n" #~ "have been updated after the distribution was released. They may\n" #~ "contain security or bug fixes.\n" #~ "\n" #~ "To download these packages, you will need to have a working Internet \n" #~ "connection.\n" #~ "\n" #~ "Do you want to install the updates ?" #~ msgstr "" #~ "இந்த பொதிகள் உங்கள் இயக்க நிரல் வெளியிட்ட பின் வெளிவந்தவை\n" #~ "இவை பொதுவாக பிழைகளை நீக்கவும், பாதுகாப்பு குறைபாடுகளை\n" #~ "நீக்கவும் வெளியிடப்பட்டவை \n" #~ "\n" #~ "இவற்ைற நிறுவ உங்களுக்கு நல்ல இணையத்ெதாடர்பு தேவை\n" #~ "\n" #~ "இவற்ைற நிறுவ விருப்பமா ?" #~ msgid "Installing bootloader" #~ msgstr "துவங்குநிரலை நிறுவப்படுகிறது" #~ msgid "" #~ "You may now provide options to module %s.\n" #~ "Options are in format ``name=value name2=value2...''.\n" #~ "For instance, ``io=0x300 irq=7''" #~ msgstr "" #~ "%s.கூறுக்கான விருப்பத்ேதர்வுகளை தாருங்கள்\n" #~ "பெயர்=மதிப்பு என்ற அமைப்பில் இருக்கவேண்டும்...''.\n" #~ "உதாரனத்திற்கு , ``io=0x300 irq=7''" #~ msgid "Configuring applications..." #~ msgstr "பயன்பாடுகள் வடிவமைக்கப்படுகிறது..." #~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "அச்சுப்ெபாறியை பயன்பாடுகள் பயன்படுத்தட்டும்" #~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "அச்சுப்ெபாறியை பயன்பாடுகளிலிருந்து நீக்கவும்" #~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "அச்சுப்ெபாறியை பயன்பாடுகள் பயன்படுத்த சேர்க்கப்படுகிறது" #~ msgid "" #~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/" #~ "GIMP." #~ msgstr "\"%s\" அச்சுப்ெபாறி பயன்பாடுகள் பயன்படுத்த வெற்றிகரமாக சேர்க்கப்பட்டது" #~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." #~ msgstr "\"%s\" அச்சுப்ெபாறி பயன்பாடுகள் பயன்படுத்த சேர்க்க முடியவில்ைல" #~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "அச்சுப்ெபாறியை பயன்பாடுகள் பயன்படுத்த நீக்கப்படுகிறது" #~ msgid "" #~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice." #~ "org/GIMP." #~ msgstr "\"%s\" அச்சுப்ெபாறி பயன்பாடுகளிலிருந்து நீக்கப்பட்டது" #~ msgid "" #~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." #~ msgstr "\"%s\" அச்சுப்ெபாறி பயன்பாடுகளிலிருந்து நீக்க முடியவில்ைல" #~ msgid "Use auto detection" #~ msgstr "தானாக கண்டுபிடிக்கவும்" #~ msgid "/dev/hda" #~ msgstr "/dev/hda" #~ msgid "/dev/hdb" #~ msgstr "/dev/hdb" #~ msgid "/dev/fd0" #~ msgstr "/dev/fd0" #~ msgid "" #~ "No ethernet network adapter has been detected on your system.\n" #~ "I cannot set up this connection type." #~ msgstr "" #~ "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல.\n" #~ " என்னால் இது போன்ற இயக்கத்ைத வடிவமைக்க முடியாது" #~ msgid "" #~ "Please choose which network adapter you want to use to connect to " #~ "Internet." #~ msgstr "எந்த வலையமைப்பு அட்ைட உங்களை இணையத்துடன் இணைத்துள்ளது" #~ msgid "chunk size" #~ msgstr "அளவு" #~ msgid "mkraid failed (maybe raidtools are missing?)" #~ msgstr "mkraid தோல்வியடைந்தது(raidtools பொதி இல்ைலயா?)" #~ msgid "mkraid failed" #~ msgstr "mkraid தோல்வியடைந்தது" #~ msgid "The package %s is needed. Install it?" #~ msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். ஓப்புதல் தரவும்?" #~ msgid "SILO Installation" #~ msgstr "சிலோ நிறுவல்" #~ msgid "First sector of boot partition" #~ msgstr "துவங்குவகிர்தலின் முதல் வில்ைல" #~ msgid "Bootloader installation" #~ msgstr "துவங்குநிரல் நிறுவல்" #~ msgid "SILO" #~ msgstr "சிலோ" #~ msgid "Alcatel speedtouch usb" #~ msgstr "அல்காடெல் ஸ்பிட்டச் -Alcatel speedtouch usb" #~ msgid "Harddrake2 version %s" #~ msgstr "டிரேக்வன்ெபாருள்2 வெளியீடு %s" #~ msgid "" #~ "You can export using NFS or SMB. Please select which you'd like to use." #~ msgstr "" #~ "நீங்கள் சம்பா, NFS மூலம் ஏற்றுமதி செய்யலாம். உங்களுக்கு தேவையானதைத் தேர்வுச் செய்யவும்" #~ msgid "" #~ "You can export using NFS or Samba. Please select which you'd like to use." #~ msgstr "" #~ "நீங்கள் சம்பா, NFS மூலம் ஏற்றுமதி செய்யலாம். உங்களுக்கு தேவையானதைத் தேர்வுச் செய்யவும்" #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "உங்களுக்கு 3D வன்ெபாருள் முடுக்கத்துடன் வசதிகள் X %s மட்டும் தான் கிடைக்கும். ஆனால் \n" #~ "X %s ல் சிறந்த 2D செயல்திறன் கிடைக்கலாம். தமிழ் சரியாக இயங்க 4 க்கு மேல் பயன்படுத்து" #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s,\n" #~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "உங்களுக்கு 3D வன்ெபாருள் முடுக்கத்துடன் X %s ஆராய்ச்சி முறையில் கிடைக்கும் ஆனால் இது " #~ "உங்கள் கணினியை செயலிழக்கச் செய்யலாம்\n" #~ "X %s ல் சிறந்த 2D செயல்திறன் கிடைக்கலாம். தமிழ் சரியாக இயங்க 4 க்கு மேல் பயன்படுத்து" #~ msgid "Xpmac (installation display driver)" #~ msgstr "Xpmac(காட்சியமைப்பு அட்ைடயின் இயக்க நிரல்)" #~ msgid "4 billion colors (32 bits)" #~ msgstr "4 பில்லியன் வண்ணங்கள் (32 பிட்டுகள்)" #~ msgid "XFree86 server: %s\n" #~ msgstr "X பரிமாறி: %s\n" #~ msgid "Here is the full list of keyboards available" #~ msgstr "உங்கள் பயன்பாட்டிற்கு உள்ள விசைப்பலகைகள் அனைத்தும் இங்கே கொடுக்கப்பட்டுள்ளன" #~ msgid "Please insert the Boot floppy used in drive %s" #~ msgstr "தயவுசெய்து தொடங்குவட்ைட மீண்டும் %s இயக்கியில் போடவும்" #~ msgid "Provider dns 1 (optional)" #~ msgstr "சேவையாளரின் dns1 சேவையகம்" #~ msgid "Provider dns 2 (optional)" #~ msgstr "சேவையாளரின் dns2 சேவையகம்" #~ msgid "DHCP Client" #~ msgstr "DHCP வேண்டி" #~ msgid "European protocol" #~ msgstr "ஐரோப்பிய வரைமுறை" #~ msgid "Found \"%s\" interface do you want to use it ?" #~ msgstr "Found \"%s\" interface do you want to use it ?" #~ msgid "What kind is your ISDN connection?" #~ msgstr "உங்கள் ISDN ெதாடர்பு எந்த வகையின் கீழ் வருகிறது?" #~ msgid "" #~ "I have detected an ISDN PCI card, but I do not know its type. Please " #~ "select a PCI card on the next screen." #~ msgstr "" #~ "ISDN வலையமைப்பு அட்ைட ஒன்று உள்ளது. அைதப்பற்றிய விவரம் எதுவும் காணப்படவில்ைல," #~ "தயவுெசய்து ஒன்ைற ேதர்ந்ெதடுக்கவும்" #~ msgid "No ISDN PCI card found. Please select one on the next screen." #~ msgstr "" #~ "ISDN வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல, தயவுெசய்து ஒன்ைற ேதர்ந்ெதடுக்கவும்" #~ msgid "Scientific Workstation" #~ msgstr "அறிவியல் பணிக்கணினி" #~ msgid "Configuration of a remote printer" #~ msgstr "தொலைவு அச்சுப்ெபாறியின் வடிவமைப்பு" #~ msgid "Gnome Workstation" #~ msgstr "குேனாம் பணிக்கணினி" #~ msgid "Running \"%s\" ..." #~ msgstr "\"%s\" ...நடைபெறுகிறது" #~ msgid "Compact" #~ msgstr "நெருக்கமாக"