# SOME DESCRIPTIVE TITLE. # Copyright (C) 2002 MandrakeSoft # # NOTE: the charset= value changed to "cp1252" to avoid problems with # msgmerge when building. # # prabu # msgid "" msgstr "" "Project-Id-Version: DrakX 1.0\n" "POT-Creation-Date: 2002-08-21 15:44+0200\n" "PO-Revision-Date: 2002-08-21 23:38-0400\n" "Last-Translator: prabu \n" "Language-Team: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=cp1252\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kB ¸¢§Ä¡¨Àð" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kB ¸¢§Ä¡¨Àð" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB ¦Á¸¡¨Àð" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB ¦Á¸¡¨Àð «øÄÐ «¾üÌ «¾¢¸Á¡¸" #: ../../Xconfig/card.pm_.c:201 msgid "Choose a X server" msgstr "X-ÀâÁ¡È¢¨Âò §¾÷× ¦ºö" #: ../../Xconfig/card.pm_.c:201 msgid "X server" msgstr "X-ÀâÁ¡È¢" #: ../../Xconfig/card.pm_.c:228 msgid "Multi-head configuration" msgstr "Àø¾¢¨Ã¸ ÅÊŨÁôÒ" #: ../../Xconfig/card.pm_.c:229 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "¯í¸û ¸½¢½¢ «¨ÁôÒ Àø¾¢¨Ã¸ ÅÊŨÁôÀ¢ø §Å¨Äî ¦ºöÔõ\n" "¿£í¸û ±ýÉ ¦ºö ŢÕõÒ¸¢È£÷¸û?" #: ../../Xconfig/card.pm_.c:284 msgid "Select the memory size of your graphics card" msgstr "¯í¸û ¸¡ðº¢Â¨ÁôÒ «ð¨¼Â¢ý ¿¢¨ÉŸò¾¢ý «Ç¨Åò §¾÷ó¦¾Îí¸û" #: ../../Xconfig/card.pm_.c:345 msgid "XFree configuration" msgstr "X ÅÊŨÁôÒ" #: ../../Xconfig/card.pm_.c:347 msgid "Which configuration of XFree do you want to have?" msgstr "±ùÅ¢¾ X ÅÊŨÁô¨À ¨ÅòÐ즸¡ûÇ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../Xconfig/card.pm_.c:379 msgid "Configure all heads independently" msgstr "«¨ÉòÐ ¾¢¨Ã¸¨ÇÔõ ¾É¢ò¾É¢Â¡¸ ÅÊŨÁì¸×õ" #: ../../Xconfig/card.pm_.c:380 msgid "Use Xinerama extension" msgstr "º¢É¢Ã¡Á¡ ¿£ðÊôÒ¸¨Ç ÀÂýÀÎò¾×õ" #: ../../Xconfig/card.pm_.c:384 #, c-format msgid "Configure only card \"%s\"%s" msgstr "\"%s\"%s ±ýÈ «ð¨¼¨Â ÁðÎõ ÅÊŨÁì¸×õ" #: ../../Xconfig/card.pm_.c:398 ../../Xconfig/card.pm_.c:399 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "X- %s" #: ../../Xconfig/card.pm_.c:409 ../../Xconfig/card.pm_.c:435 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "Åý¦À¡Õû ÓÎì¸òмý ÜÊ 3D X- %s" #: ../../Xconfig/card.pm_.c:412 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "¯í¸ÙìÌ 3D Åý¦À¡Õû ÓÎì¸òмý ź¾¢¸û X %s ÁðÎõ ¾¡ý ¸¢¨¼ìÌõ. ¬É¡ø \n" "X %s ø º¢Èó¾ 2D ¦ºÂø¾¢Èý ¸¢¨¼ì¸Ä¡õ. ¾Á¢ú ºÃ¢Â¡¸ þÂí¸ 4 ìÌ §Áø ÀÂýÀÎòÐ" #: ../../Xconfig/card.pm_.c:414 ../../Xconfig/card.pm_.c:437 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "¯í¸ÙìÌ 3D Åý¦À¡Õû ÓÎì¸òмý X %s ¸¢¨¼ìÌõ" #: ../../Xconfig/card.pm_.c:422 ../../Xconfig/card.pm_.c:443 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "¯í¸ÙìÌ 3D Åý¦À¡Õû ÓÎì¸òмý X %s ¬Ã¡ö ӨȢø ¸¢¨¼ìÌõ" #: ../../Xconfig/card.pm_.c:425 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "¯í¸ÙìÌ 3D Åý¦À¡Õû ÓÎì¸òмý X %s ¬Ã¡ö ӨȢø ¸¢¨¼ìÌõ ¬É¡ø þÐ ¯í¸û ¸½¢½¢" "¨Â ¦ºÂÄ¢Æì¸î ¦ºöÂÄ¡õ\n" "X %s ø º¢Èó¾ 2D ¦ºÂø¾¢Èý ¸¢¨¼ì¸Ä¡õ. ¾Á¢ú ºÃ¢Â¡¸ þÂí¸ 4 ìÌ §Áø ÀÂýÀÎòÐ" #: ../../Xconfig/card.pm_.c:428 ../../Xconfig/card.pm_.c:445 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "¯í¸ÙìÌ 3D Åý¦À¡Õû ÓÎì¸òмý X %s ¬Ã¡ö ӨȢø ¸¢¨¼ìÌõ ¬É¡ø þÐ ¯í¸û ¸½¢½¢¨Â " "¦ºÂÄ¢Æì¸î ¦ºöÂÄ¡õ" #: ../../Xconfig/card.pm_.c:451 msgid "Xpmac (installation display driver)" msgstr "Xpmac(¸¡ðº¢Â¨ÁôÒ «ð¨¼Â¢ý þÂì¸ ¿¢Ãø)" #: ../../Xconfig/main.pm_.c:78 ../../Xconfig/main.pm_.c:79 #: ../../Xconfig/monitor.pm_.c:94 ../../any.pm_.c:974 msgid "Custom" msgstr "¾É¢ôÀÂÉ¡ìÌ" #: ../../Xconfig/main.pm_.c:104 msgid "Graphic Card" msgstr "¸¡ðº¢Â¨ÁôÒ «ð¨¼" #: ../../Xconfig/main.pm_.c:107 ../../Xconfig/monitor.pm_.c:91 msgid "Monitor" msgstr "¾¢¨Ã¸õ" #: ../../Xconfig/main.pm_.c:110 ../../Xconfig/resolution_and_depth.pm_.c:209 msgid "Resolution" msgstr "ÀâÁ¡½í¸û" #: ../../Xconfig/main.pm_.c:114 msgid "Test" msgstr "§º¡¾¨É" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:59 #: ../../diskdrake/interactive.pm_.c:377 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Å¢ÕôÀò§¾÷׸û" #: ../../Xconfig/main.pm_.c:121 ../../Xconfig/resolution_and_depth.pm_.c:268 #: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:281 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:156 #: ../../my_gtk.pm_.c:284 ../../my_gtk.pm_.c:307 #: ../../standalone/drakbackup_.c:3324 ../../standalone/drakbackup_.c:3419 #: ../../standalone/drakbackup_.c:3438 msgid "Ok" msgstr "ºÃ¢" #: ../../Xconfig/main.pm_.c:121 ../../diskdrake/dav.pm_.c:24 #: ../../printerdrake.pm_.c:2933 ../../standalone/logdrake_.c:224 msgid "Quit" msgstr "¦ÅǢø" #: ../../Xconfig/main.pm_.c:144 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "þó¾ Á¡üÈí¸¨Ç «ôÀʧ ¨ÅòÐ즸¡û¸¢È£÷¸Ç¡?\n" "¾ü§À¡¨¾Â ÅÊŨÁôÒ\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:91 msgid "Choose a monitor" msgstr "¾¢¨Ã¸ò¨¾ §¾÷×î ¦ºö" #: ../../Xconfig/monitor.pm_.c:95 msgid "Plug'n Play" msgstr "Plug'n Play -1997 ìÌ À¢ÈÌ Åó¾ ¾¢¨Ã¸í¸û þùŨ¸¨Âî §ºÕõ" #: ../../Xconfig/monitor.pm_.c:96 ../../mouse.pm_.c:45 msgid "Generic" msgstr "¦À¡Ð-þÉ ¾¢¨Ã¸õ" #: ../../Xconfig/monitor.pm_.c:97 ../../harddrake/ui.pm_.c:36 msgid "Vendor" msgstr "Å¢üÀÅ÷" #: ../../Xconfig/monitor.pm_.c:107 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "¾¡É¡¸ §¾ÊÂ Ó¨È ¦ÅüÈ¢¦ÀÈÅ¢ø¨Ä.¾ÂצºöÐ ºÃ¢Â¡É ¾¢¨Ã¸ò¨¾.§¾÷ó¦¾Îì¸×õ" #: ../../Xconfig/monitor.pm_.c:112 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "þíÌ ¿£í¸û ¦ºöÔõ Á¡üÈí¸û ¯í¸û ¾¢¨Ã¸ò¨¾ ÓüÈ¢Öõ ¦ºÂÄ¢Æì¸î ¦ºöРŢ¼Ä¡õ. \n" "¯í¸ÙìÌ Åý¦À¡Õû ÀüÈ¢ ¦¾Ã¢óÐ þÕó¾¡ø ÁðΧÁ þíÌûǨ¾ \n" "Á¡üÚí¸û. \n" "\n" "¾¢¨Ã¸ò¾¢ý ´ò¾¢Âì¸ «Ç׸¨Ç º¢ó¾¢òÐ §¾÷×î ¦ºöÔí¸û\n" "\n" "±ô§À¡Ðõ º¢È¢Â Å£î͸¨Ç§Â §¾÷×î ¦ºöÔí¸û \n" "¾ÅÈ¡É ´ò¾¢Âì¸ «Ç׸¨Ç §¾÷×î ¦ºö¾¡ø ¾¢¨Ã¸õ ÓüÈ¢Öõ ¦ºÂÄ¢ÆóÐ §À¡¸Ä¡õ" #: ../../Xconfig/monitor.pm_.c:119 msgid "Horizontal refresh rate" msgstr "¸¢¨¼Â¡É ÒÐì¸ø Å£¾õ" #: ../../Xconfig/monitor.pm_.c:120 msgid "Vertical refresh rate" msgstr "¦ºíÌò¾¡É ÒÐì¸ø Å£¾õ" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 Åñ½í¸û (8 À¢ðθû)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32000 Åñ½í¸û (15 À¢ðθû)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65000 Åñ½í¸û (16 À¢ðθû)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 Á¢øÄ¢Âý Åñ½í¸û (24 À¢ðθû)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 À¢øÄ¢Âý Åñ½í¸û (32 À¢ðθû)" #: ../../Xconfig/resolution_and_depth.pm_.c:129 msgid "Resolutions" msgstr "ÀâÁ¡½í¸û" #: ../../Xconfig/resolution_and_depth.pm_.c:254 msgid "Choose the resolution and the color depth" msgstr "¯í¸ÙìÌ Å¢ÕôÀÁ¡É ÀâÁ¡½í¸¨ÇÔõ, ¬Æí¸¨ÇÔõ §¾÷ó¦¾Îí¸û" #: ../../Xconfig/resolution_and_depth.pm_.c:255 #, c-format msgid "Graphics card: %s" msgstr "¸¡ðº¢Â¨ÁôÒ «ð¨¼: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1015 #: ../../bootlook.pm_.c:334 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:412 ../../install_steps_gtk.pm_.c:470 #: ../../install_steps_interactive.pm_.c:576 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:105 #: ../../interactive/newt.pm_.c:174 ../../interactive/stdio.pm_.c:39 #: ../../interactive/stdio.pm_.c:143 ../../my_gtk.pm_.c:155 #: ../../my_gtk.pm_.c:159 ../../my_gtk.pm_.c:284 #: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:1990 #: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3278 #: ../../standalone/drakbackup_.c:3311 ../../standalone/drakbackup_.c:3337 #: ../../standalone/drakbackup_.c:3364 ../../standalone/drakbackup_.c:3391 #: ../../standalone/drakbackup_.c:3451 ../../standalone/drakbackup_.c:3478 #: ../../standalone/drakbackup_.c:3504 ../../standalone/drakconnect_.c:115 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 #: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfloppy_.c:383 #: ../../standalone/drakfont_.c:970 ../../standalone/drakgw_.c:598 #: ../../standalone/logdrake_.c:224 ../../standalone/logdrake_.c:528 #: ../../standalone/tinyfirewall_.c:64 msgid "Cancel" msgstr "¿£ìÌ" #: ../../Xconfig/test.pm_.c:26 msgid "Do you want to test the configuration?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../Xconfig/test.pm_.c:26 msgid "Test of the configuration" msgstr "ÅÊŨÁôÒ §º¡¾¢òÐ À¡÷ì¸ôÀθ¢ÈÐ" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Å¢¨ºôÀĨ¸Â¢ý þ¼ «¨Á× %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "±Ä¢Â¢ý Ũ¸: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "±Ä¢Â¢ý Ũ¸: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "¾¢¨Ã¸õ: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "¾¢¨Ã¸ò¾¢ý ¸¢¨¼Â¡É ´ò¾¢Âì¸õ %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "¾¢¨Ã¸ò¾¢ý ¦ºíÌòÐ ´ò¾¢Âì¸õ %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "¸¡ðº¢Â¨ÁôÒ «ð¨¼ %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "¸¡ðº¢Â¨ÁôÒ «ð¨¼Â¢ý ¿¢¨ÉŸ «Ç×: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "Åñ½í¸Ç¢ý ¬Æõ: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "ÀâÁ¡½õ: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "X ÀâÁ¡È¢: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "X ÀâÁ¡È¢Â¢ý þÂìÌ ¿¢Ãø %s\n" #: ../../Xconfig/various.pm_.c:60 msgid "Graphical interface at startup" msgstr "ÐÅíÌõ §À¡Ð ŨÃÅ¢ÂøÅƢ¢ø ÐÅí̸" #: ../../Xconfig/various.pm_.c:61 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "±ýÉ¡ø ¯í¸û ¸½¢½¢¨Â ÐÅíÌõ §À¡Ð ŨÃÅ¢ÂøÅƢ¢ø ÐÅì¸ ÓÊÔõ.\n" "´ù¦Å¡Õ Ó¨È ¸½¢½¢ ÐÅíÌõ§À¡Ðõ X ÐÅí¸ðÎÁ¡?" #: ../../Xconfig/various.pm_.c:72 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "¯í¸û ¸¡ðº¢Â¨ÁôÒ «ð¨¼Â¢ø ÊÅ¢ì¸¡É þ¨¼Ó¸õ ¯ûÇÐ.\n" "¦¾¡¨ÄôÒÆí¸¢ ãÄõ þ¾¨É ÅÊŨÁì¸Ä¡õ.\n" ".\n" "þÐ ºÃ¢Â¡¸ §Å¨Äî ¦ºö ¿£í¸û ¸½¢½¢ ÐÅíÌÓý§À ¯í¸û ÊÅ¢Ô¼ý þ¨Éò¾¢Õì¸ §ÅñÎõ\n" "ÐÅíÌ¿¢ÃÄ¢ø ÊÅ¢-ÅÆ¢ ±ýÀ¨¾ §¾÷×î ¦ºö¾¡ø ÊŢ¢ø À¡÷ì¸Ä¡õ\n" "\n" "¿£í¸û þ¾¨É ÀÂý ÀÎò¾ô §À¡¸¢È£÷¸Ç¡?" #: ../../Xconfig/various.pm_.c:84 msgid "What norm is your TV using?" msgstr "¯í¸û ÊÅ¢ ±ó¾ ¦ºó¾Ã ŨçÂðÊý ¸£ú ÅÕ¸¢ÈÐ?" #: ../../any.pm_.c:108 ../../any.pm_.c:133 msgid "First sector of boot partition" msgstr "ÐÅíÌŸ¢÷¾Ä¢ý Ó¾ø Å¢ø" #: ../../any.pm_.c:108 ../../any.pm_.c:133 ../../any.pm_.c:210 msgid "First sector of drive (MBR)" msgstr "Åý¾ðÊýÓ¾ý¨Á Å¢øÄ¢ø " #: ../../any.pm_.c:112 msgid "SILO Installation" msgstr "º¢§Ä¡ ¿¢ÚÅø" #: ../../any.pm_.c:113 ../../any.pm_.c:126 msgid "Where do you want to install the bootloader?" msgstr "¯í¸û ÐÅíÌ¿¢Ã¨Ä ±íÌ ¿¢ÚŠŢÕõÒ¸¢È£÷¸û?" #: ../../any.pm_.c:125 msgid "LILO/grub Installation" msgstr "Ä¢§Ä¡/¸¢Ãô ¿¢ÚÅø" #: ../../any.pm_.c:137 ../../any.pm_.c:151 msgid "SILO" msgstr "º¢§Ä¡" #: ../../any.pm_.c:139 msgid "LILO with text menu" msgstr "¯¨ÃÅÆ¢ Ä¢§Ä¡" #: ../../any.pm_.c:140 ../../any.pm_.c:151 msgid "LILO with graphical menu" msgstr "ŨÃÅ¢ÂøÅÆ¢ Ä¢§Ä¡" #: ../../any.pm_.c:143 msgid "Grub" msgstr "¸¢Ãô" #: ../../any.pm_.c:147 msgid "Boot from DOS/Windows (loadlin)" msgstr "¼¡Š/Å¢ý§¼¡…¢Ä¢ÕóÐ ÐÅíÌ" #: ../../any.pm_.c:149 ../../any.pm_.c:151 msgid "Yaboot" msgstr "¡¦¾¡¼í¸ø" #: ../../any.pm_.c:158 ../../any.pm_.c:190 msgid "Bootloader main options" msgstr "ÐÅíÌ¿¢ÃÄ¢ý Ó츢 ŢÕôÀò§¾÷׸û" #: ../../any.pm_.c:159 ../../any.pm_.c:191 msgid "Bootloader to use" msgstr "ÀÂýÀÎò¾ §ÅñÊ ÐÅíÌ¿¢Ãø" #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "ÐÅíÌ¿¢Ãø ¿¢ÚÅôÀθ¢ÈÐ" #: ../../any.pm_.c:163 ../../any.pm_.c:193 msgid "Boot device" msgstr "ÐÅíÌ º¡¾Éõ" #: ../../any.pm_.c:164 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA(À¨Æ ÓýÉ¢Âì¸í¸§Ç¡Î §Å¨Äî ¦ºö¡Ð)" #: ../../any.pm_.c:165 msgid "Compact" msgstr "¦¿Õì¸Á¡¸" #: ../../any.pm_.c:165 msgid "compact" msgstr "¦¿Õì¸Á¡¸" #: ../../any.pm_.c:166 ../../any.pm_.c:290 msgid "Video mode" msgstr "´Ç¢ò§¾¡üÈ Ó¨È¨Á" #: ../../any.pm_.c:168 msgid "Delay before booting default image" msgstr "¦¸¡¼¡¿¢¨Ä ¿¢Ãø þÂíÌžüì¸¡É §¿Ãõ" #: ../../any.pm_.c:170 ../../any.pm_.c:786 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1111 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:743 ../../printerdrake.pm_.c:858 #: ../../standalone/drakconnect_.c:624 ../../standalone/drakconnect_.c:649 msgid "Password" msgstr "¸¼×¡ø" #: ../../any.pm_.c:171 ../../any.pm_.c:787 #: ../../install_steps_interactive.pm_.c:1112 msgid "Password (again)" msgstr "¸¼×¡ø (Á£ñÎõ)" #: ../../any.pm_.c:172 msgid "Restrict command line options" msgstr "¯¨ÃÅƢ¢ø ÀÂýÀÎò¾ìÜÊ ŢÕôÀò§¾÷׸¨Çì ¸ðÎÀÎòÐ" #: ../../any.pm_.c:172 msgid "restrict" msgstr "¸ðÎÀÎòÐ" #: ../../any.pm_.c:174 msgid "Clean /tmp at each boot" msgstr "/tmp «¨¼¨Å ´ù¦Å¡Õ Ó¨Èò ÐÅíÌõ§À¡Ðõ Ш¼òРŢÎ" #: ../../any.pm_.c:175 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "ºÃ¢Â¡É ¿¢¨ÉŸò¨¾ ¦¾Ã¢Å¢ì¸×õ(¸ñ¦¼Îò¾ «Ç× %d MB)" #: ../../any.pm_.c:177 msgid "Enable multi profiles" msgstr "´ýÚìÌ §ÁüôÀð¼ ÀÂÉ÷ ÌÈ¢ôÒ¸¨Ç þÂÖ¨ÁôÀÎòÐ" #: ../../any.pm_.c:181 msgid "Give the ram size in MB" msgstr "ºÃ¢Â¡É ¿¢¨ÉŸò¨¾ ¦Á¸¡¨ÀðÊø ¦¾Ã¢Å¢ì¸×õ" #: ../../any.pm_.c:183 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Option ``Restrict command line options'' ±ýÀÐ ¸¼×¡ø þø¨Ä¦ÂýÈ¡ø ÀÂÉüÈÐ" #: ../../any.pm_.c:184 ../../any.pm_.c:762 #: ../../diskdrake/interactive.pm_.c:1180 #: ../../install_steps_interactive.pm_.c:1106 msgid "Please try again" msgstr "Á£ñÎõ ÓÂüº¢òÐ À¡÷ì¸×õ" #: ../../any.pm_.c:184 ../../any.pm_.c:762 #: ../../install_steps_interactive.pm_.c:1106 msgid "The passwords do not match" msgstr "¸¼×¡ü¸û þÃñÎõ ´ýÈ¡¸ þø¨Ä" #: ../../any.pm_.c:192 msgid "Init Message" msgstr "Ó¾ø ¦ºö¾¢" #: ../../any.pm_.c:194 msgid "Open Firmware Delay" msgstr "Open Firmware ¾¡Á¾õ" #: ../../any.pm_.c:195 msgid "Kernel Boot Timeout" msgstr "¸Õò¦¾¡¼ì¸ò¾¢ø ¦ÅÇ¢§ÂüÈ §¿Ãõ ¸¼óÐÅ¢ð¼Ð" #: ../../any.pm_.c:196 msgid "Enable CD Boot?" msgstr "º¢Ê¢ø þÕóÐ ¦¾¡¼í¸Ä¡Á¡?" #: ../../any.pm_.c:197 msgid "Enable OF Boot?" msgstr "OFþø þÕóÐ ¦¾¡¼í¸Ä¡Á¡?" #: ../../any.pm_.c:198 msgid "Default OS?" msgstr "¦¸¡¼¡¿¢¨Ä þÂì¸ «¨ÁôÒ?" #: ../../any.pm_.c:232 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "¿£í¸û ÐÅíÌ¿¢Ã¨Ä µ÷ Ÿ¢Ã¢ø ¿¢Ú׸¢È£÷¸û\n" "¯í¸û Åý¾ðÊý ÐÅì¸ò¾¢ø µ÷ ÐÅíÌ¿¢Ãø þÕôÀÐ þ¾üÌ ¦À¡ÐÅ¡É ¸¡ÃÉõ.\n" "\n" "¿£í¸û ±ó¾ Åý¾ðÊø þÕóÐ ÐÅí¸ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "¯í¸û ÐÅíÌ ÀðÊ þ§¾¡ ¯ûÇÐ\n" "þ¨¾ ¿£í¸û Å¢ÕôÀõ §À¡ø Á¡üȢ¨Áì¸Ä¡õ" #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1483 #: ../../standalone/drakbackup_.c:1596 ../../standalone/drakfont_.c:1011 #: ../../standalone/drakfont_.c:1054 msgid "Add" msgstr "§º÷" #: ../../any.pm_.c:257 ../../any.pm_.c:774 ../../diskdrake/dav.pm_.c:60 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../standalone/drakbackup_.c:2696 msgid "Done" msgstr "ÓÊó¾Ð" #: ../../any.pm_.c:257 msgid "Modify" msgstr "Á¡üÚ" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "¿£í¸û ±ó¾ þÂì¸ «¨ÁôÒì¸¡É Ñ¨Æ¨Å §º÷ì¸ §À¡¸¢È£÷¸û?" #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1630 msgid "Linux" msgstr "Ä¢ÉìŠ" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "ÁüÈ þÂì¸ «¨ÁôÒì¸û(ºý...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "ÁüÈ þÂì¸ «¨ÁôÒì¸û(§Áì...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "ÁüÈ þÂì¸ «¨ÁôÒì¸û(Å¢ý§¼¡Š...)" #: ../../any.pm_.c:286 msgid "Image" msgstr "¿¢ÃÖÕÅõ" #: ../../any.pm_.c:287 ../../any.pm_.c:298 msgid "Root" msgstr "ãÄõ" #: ../../any.pm_.c:288 ../../any.pm_.c:316 msgid "Append" msgstr "À¢ý§º÷" #: ../../any.pm_.c:292 msgid "Initrd" msgstr "Ó¾ø ¿¢ÃÖÕÅõ" #: ../../any.pm_.c:293 msgid "Read-write" msgstr "±Ø¾-ÀÊì¸" #: ../../any.pm_.c:300 msgid "Table" msgstr "«ð¼Å¨½" #: ../../any.pm_.c:301 msgid "Unsafe" msgstr "À¡Ð¸¡ôÀ¢øÄ¡¾Ð" #: ../../any.pm_.c:308 ../../any.pm_.c:313 ../../any.pm_.c:315 msgid "Label" msgstr "«¨¼Â¡Çõ" #: ../../any.pm_.c:310 ../../any.pm_.c:320 ../../harddrake/v4l.pm_.c:201 msgid "Default" msgstr "¦¸¡¼¡¿¢¨Ä" #: ../../any.pm_.c:317 msgid "Initrd-size" msgstr "Ó¾ø ¿¢ÃÖÕÅò¾¢ý «Ç×" #: ../../any.pm_.c:319 msgid "NoVideo" msgstr "´Ç¢ò§¾¡üÈÁ¢øÄ¡Áø" #: ../../any.pm_.c:327 msgid "Remove entry" msgstr "ѨÆÅ¢¼ò¨¾ ¿£ìÌ" #: ../../any.pm_.c:330 msgid "Empty label not allowed" msgstr "¦ÅüÚ «¨¼Â¡Çí¸ÙìÌ «ÛÁ¾¢Â¢ø¨Ä" #: ../../any.pm_.c:331 msgid "You must specify a kernel image" msgstr "¿£í¸û ¿¢îºÂõ ´Õ ¸ÕÅ¢ý ¿¢ÃÖÕÅò¨¾ §¾÷×î ¦ºö §ÅñÎõ" #: ../../any.pm_.c:331 msgid "You must specify a root partition" msgstr "¿£í¸û ¿¢îºÂõ ´Õ ãÄ Å¸¢¨Ã §¾÷×î ¦ºö §ÅñÎõ" #: ../../any.pm_.c:332 msgid "This label is already used" msgstr "þó¾ «¨¼Â¡Çõ ²ü¸É§Å ÀÂýÀ¡ðÊø ¯ûÇÐ" #: ../../any.pm_.c:656 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s þ¨¼Ó¸ «ð¨¼¸û ¯ûÇÉ" #: ../../any.pm_.c:657 msgid "Do you have another one?" msgstr "§ÁÖõ ¯ûÇÉÅ¡?" #: ../../any.pm_.c:658 #, c-format msgid "Do you have any %s interfaces?" msgstr "¿£í¸û %s þ¨¼Ó¸ «ð¨¼¸û ²§¾Ûõ ÀÂýÀÎòи¢È¢÷¸Ç¡?" #: ../../any.pm_.c:660 ../../any.pm_.c:821 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:283 msgid "No" msgstr "þø¨Ä" #: ../../any.pm_.c:660 ../../any.pm_.c:820 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:283 msgid "Yes" msgstr "¬õ" #: ../../any.pm_.c:661 msgid "See hardware info" msgstr "Åý¦À¡Õð¸Ç¢ý Å¢ÅÃí¸¨Çô À¡Õí¸û" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:677 #, c-format msgid "Installing driver for %s card %s" msgstr "%s «ð¨¼ %s ìÌ þÂìÌ ¿¢Ãø ¿¢ÚÅôÀθ¢ÈÐ" #: ../../any.pm_.c:678 #, c-format msgid "(module %s)" msgstr "(%s ÜÚ)" #: ../../any.pm_.c:689 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "%s.ÜÚì¸¡É Å¢ÕôÀò§¾÷׸¨Ç ¾¡Õí¸û\n" "0x like '0x123' §À¡ýÈ ÐÅì¸òмý «Ð þÕ츧ÅñÎõ" #: ../../any.pm_.c:695 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "%s.ÜÚì¸¡É Å¢ÕôÀò§¾÷׸¨Ç ¾¡Õí¸û\n" "¦ÀÂ÷=Á¾¢ôÒ ±ýÈ «¨ÁôÀ¢ø þÕ츧ÅñÎõ...''.\n" "¯¾¡ÃÉò¾¢üÌ , ``io=0x300 irq=7''" #: ../../any.pm_.c:697 msgid "Module options:" msgstr "ÜÚ «¨ÁôÒ¸û" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:709 #, c-format msgid "Which %s driver should I try?" msgstr "þó¾ %s ìÌ ±ó¾ þÂì¸ ¿¢Ã¨Ä ÀÂýÀÎò¾ §ÅñÎõ?" #: ../../any.pm_.c:718 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "þó¾ %s ìÌ ±ó¾ þÂì¸ ¿¢Ã¨Ä ÀÂýÀÎò¾ º¢Ä\n" "«¾¢¸ Å¢ÅÃí¸û §¾¨Å. þ¨¾ ¿£í¸û ¾Õ¸¢È£÷¸Ç¡«øÄÐ \n" "ʧÃìx ¾ýÉ¢Âì¸ò §¾ÊÂÈ¢¾ø ¦ºöÂðÎÁ¡\n" "þÐ ±ô§À¡¾¡ÅÐ ¯í¸û ¸½¢½¢ ¦¾¡í¸ø ¿¢¨ÄìÌ þðÎî ¦ºøÄÄ¡õ\n" "¬É¡ø ±¾¨ÉÔõ ¦ºÂÄ¢Æì¸î ¦ºö¡Ð" #: ../../any.pm_.c:722 msgid "Autoprobe" msgstr "¾ýÉ¢Âì¸ò §¾ÊÂÈ¢¾ø" #: ../../any.pm_.c:722 msgid "Specify options" msgstr "Å¢ÕôÀò§¾÷× ¦¾Ã¢Å¢ì¸×õ" #: ../../any.pm_.c:734 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s ±ýÈ þÂì¸ ¿¢Ãø ²üÈò¾¢ø À¢¨Æ §¿÷óÐûÇÐ\n" "¿£í¸û §ÅÚ Å¢ÕôÀò§¾÷׸¨Ç ¦¾Ã¢Å¢òÐ À¡÷ì¸×õ" #: ../../any.pm_.c:750 msgid "access to X programs" msgstr "X ¿¢Ãø¸Ùì¸¡É «Û¸ø" #: ../../any.pm_.c:751 msgid "access to rpm tools" msgstr "rpm ¦À¡¾¢ì ¸ÕÅ¢¸Ùì¸¡É «Û¸ø" #: ../../any.pm_.c:752 msgid "allow \"su\"" msgstr "\"su\" ¿¢÷Å¡¸¢Â¡¸ Á¡Úõ ¸ð¼¨Ç¨Â «ÛÁ¾¢" #: ../../any.pm_.c:753 msgid "access to administrative files" msgstr "¿¢÷Å¡¸ §¸¡ôÒ¸ÙìÌ «ÛÁ¾¢" #: ../../any.pm_.c:758 #, c-format msgid "(already added %s)" msgstr "(%s ²ü¸É§Å §º÷ì¸ôÀðÎÅ¢ð¼Ð)" #: ../../any.pm_.c:763 msgid "This password is too simple" msgstr "þó¾ ¸¼×¡ø Á¢¸ ±Ç¢¾¡¸ ¯ûÇÐ" #: ../../any.pm_.c:764 msgid "Please give a user name" msgstr "ÀÂÉÕìÌ µ÷ ¦ÀÂ÷ ¦¸¡Î" #: ../../any.pm_.c:765 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "ÀÂÉÕìÌ ¦¸¡Îì¸ôÀÎõ ¦ÀÂâø º¢È¢Â ±ØòÐì¸û,±ñ¸û `-' `_' ÁðΧÁ þÕì¸Ä¡õ" #: ../../any.pm_.c:766 msgid "The user name is too long" msgstr "ÀÂÉÕìÌ ¦¸¡Îì¸ôÀÎõ ¦ÀÂ÷ Á¢¸ ¿£ÇÁ¡¸ ¯ûÇÐ" #: ../../any.pm_.c:767 msgid "This user name is already added" msgstr "ÀÂÉÕìÌ ¦¸¡Îì¸ôÀÎõ ¦ÀÂ÷ ²ü¸É§Å §º÷ì¸ôÀðÎÅ¢ð¼Ð" #: ../../any.pm_.c:771 msgid "Add user" msgstr "ÀÂɨÃî §º÷" #: ../../any.pm_.c:772 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "ÀÂÉ÷ ¦À¨à ¾ð¼×õ\n" "%s" #: ../../any.pm_.c:773 msgid "Accept user" msgstr "ÀÂɨà ²üÚ즸¡ûÇ×õ" #: ../../any.pm_.c:784 msgid "Real name" msgstr "¯ý¨Á¡Éô ¦ÀÂ÷" #: ../../any.pm_.c:785 ../../printerdrake.pm_.c:742 #: ../../printerdrake.pm_.c:857 msgid "User name" msgstr "ÀÂÉ÷ ¦ÀÂ÷" #: ../../any.pm_.c:788 msgid "Shell" msgstr "µÎ" #: ../../any.pm_.c:790 msgid "Icon" msgstr "ÌÚõÀ¼õ" #: ../../any.pm_.c:817 msgid "Autologin" msgstr "¾ýÉ¢Âì¸ò ¦¾¡¼í¸ø" #: ../../any.pm_.c:818 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "±ýÉ¡ø ¯í¸û ¸½¢½¢¨Â ¾ýÉ¢Âì¸ò ¦¾¡¼í¸ø ãÄÁ¡¸ ´Õ ÀÂÉÕìÌò.\n" "¦¾¡¼í¸ ÓÊÔõ. ¿£í¸û þ¾¨É ÀÂýÀÎò¾ Å¢ÕõÒ¸¢È£÷¸Ç¡?" #: ../../any.pm_.c:822 msgid "Choose the default user:" msgstr "¦¸¡¼¡¿¢¨Ä ÀÂɨÃò §¾÷×î ¦ºöÂ×õ" #: ../../any.pm_.c:823 msgid "Choose the window manager to run:" msgstr "º¡Çà §ÁġǨÃò §¾÷×î ¦ºöÂ×õ" #: ../../any.pm_.c:838 msgid "Please choose a language to use." msgstr "¿£í¸û ÀÂýÀÎò¾ Å¢ÕõÒõ ¦Á¡Æ¢¨Âò §¾÷×î ¦ºöÂ×õ" #: ../../any.pm_.c:840 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Á¡ýʧÃì Ä¢ÉìŠ ÀÄ ¦Á¡Æ¢¸Ç¢ø ¸¢¨¼ì¸¢ÈÐ\n" "¿£í¸û ¿¢ÚŠŢÕõÒõ ¦Á¡Æ¢¨Âò §¾÷×î ¦ºö¸\n" "¿£í¸û ¿¢ÚÅ¢ ÓÊòÐ ÁÚ¦¾¡¼ì¸õ ¦ºö¾×¼ý ¯í¸ÙìÌ ¸¢¨¼ìÌõ" #: ../../any.pm_.c:854 ../../install_steps_interactive.pm_.c:708 #: ../../standalone/drakxtv_.c:73 msgid "All" msgstr "«¨ÉòÐ" #: ../../any.pm_.c:974 msgid "Allow all users" msgstr "«¨ÉòÐ ÀÂɨÃÔõ «ÛÁ¾¢" #: ../../any.pm_.c:974 msgid "No sharing" msgstr "À¸¢÷§ÅÐõ þø¨Ä" #: ../../any.pm_.c:984 ../../standalone.pm_.c:57 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "%s ±ýÈ ¦À¡¾¢ ¿¢ÚÅôÀ¼§ÅñÎõ.µôÒ¾ø ¾Ã×õ?" #: ../../any.pm_.c:987 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "¿£í¸û ºõÀ¡, NFS ãÄõ ²üÚÁ¾¢ ¦ºöÂÄ¡õ. ¯í¸ÙìÌ §¾¨Å¡ɨ¾ò §¾÷×î ¦ºö" #: ../../any.pm_.c:995 ../../standalone.pm_.c:61 #, c-format msgid "Mandatory package %s is missing" msgstr "¿¢îºÂÁ¡¸ þÕì¸ §ÅñÊÂô ¦À¡¾¢ %s þø¨Ä" #: ../../any.pm_.c:1001 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "¿£í¸û ¯í¸û ÀÂÉ÷¸¨Ç ¾ò¾õ «¨¼×¸¨Ç ±Ç¢¾¡¸ À¸¢÷óÐ ¦¸¡ûÇ\n" "Å¢ÕõÒ¸¢È£÷¸Ç¡? þ¾ý ãÄõ ÀÂÉ÷¸û ¸¡ý¦¸¡Ã÷, ¿¡ÊÄŠ ¬¸¢ÂÅüÈ¢øÀ¸¢÷ ±ýÀ¨¾ò §¾÷×î " "¦ºö ÓÊÔõ .\n" "\n" "¾É¢ôÀÂÉ¡ì̾ø ´ù¦Å¡Õ ÀÂÉÕìÌõ ¾É¢ò¾É¢Â¡¸ «ÛÁ¾¢ «Ç¢ò¾ø.\n" #: ../../any.pm_.c:1015 msgid "Launch userdrake" msgstr "ʧÃìÀÂɨà ÐÅìÌ" #: ../../any.pm_.c:1017 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "¿£í¸û À¢ýÉ÷ \"fileshare\". \n" "±ýÈ ÌØÅ¢üÌ ÀÂɨà ±Ç¢¾¡¸î §º÷ì¸Ä¡õ" #: ../../any.pm_.c:1068 msgid "Welcome To Crackers" msgstr "À¨¸Å÷¸§Ç ÅÕ¸" #: ../../any.pm_.c:1069 msgid "Poor" msgstr "§Á¡ºÁ¡É" #: ../../any.pm_.c:1070 ../../mouse.pm_.c:31 msgid "Standard" msgstr "þÂøÀ¡É" #: ../../any.pm_.c:1071 msgid "High" msgstr "¯Â÷Å¡É" #: ../../any.pm_.c:1072 msgid "Higher" msgstr "Á¢¸ ¯Â÷Å¡É" #: ../../any.pm_.c:1073 msgid "Paranoid" msgstr "ºó§¾¸ô §Àö" #: ../../any.pm_.c:1076 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "þó¾ «¨ÁôÒ¸¨Ç ÀÂýÀÎòоø ܼ¡Ð,\n" "ÓüÈ¢Öõ À¡Ð¸¡ôÀüÈÐ. ¸¼×¡ø ܼ ¸¢¨¼Â¡Ð\n" "þ¨½Âò¾¢üÌ þôÀʧ ¦¾¡¼÷Ò ¦¸¡ûÇìܼ¡Ð" #: ../../any.pm_.c:1079 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "µÃÇ× À¡Ð¸¡ôÀ¡ÉÐ. ¸¼×¡ø ¯¨¼ÂÐ\n" "þ¨½Âò¾¢üÌ þôÀʧ ¦¾¡¼÷Ò ¦¸¡ûÇìܼ¡Ð" #: ../../any.pm_.c:1080 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "ºÃ¢Â¡É À¡Ð¸¡ôÀ¡ÉÐ. ¸¼×¡ø ¯¨¼ÂÐ\n" "þ¨½Âò¾¢üÌ þôÀʧ ¦¾¡¼÷Ò ¦¸¡ûÇÄ¡õ" #: ../../any.pm_.c:1081 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "«¾¢¸ À¡Ð¸¡ôÀ¡ÉÐ. ¾¢ÉÓõ ÀÄ §º¡¾¨É¸û ¿¨¼¦ÀÚõ" #: ../../any.pm_.c:1082 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "¯í¸û ¸½¢½¢ ¾ü§À¡Ð µ÷ ÀâÁ¡È¢Â¡¸ ÀÂýÀ¼ìÜÊ «Ç× À¡Ð¸¡ôÀ¡ÉÐ\n" "þÐ ¦ÅǢ¢ø þÕóÐ §ÅñʸǢý §¾¨Å¨Â ®Îî ¦ºö ÓÊÔõ \n" "¯í¸û ¸½¢½¢ ´Õ º¡¾ÃÉ ÀÂýÀ¡ðÊüÌ ±ýÈ¡ø, þýÛõ ºüÚ Ì¨Èó¾ À¡Ð¸¡ôÀǨŠÀÂýÀÎò¾Ä¡õ" #: ../../any.pm_.c:1085 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "þÐ ¦ºýÈ ¿¢¨Ä §À¡ýȧ¾. þÐ ÓüÈ¢Öõ ã¼ôÀð¼ µ÷ ¸½¢½¢Â¡Ìõ" #: ../../any.pm_.c:1091 msgid "DrakSec Basic Options" msgstr "ʧÃìÀ¡Ð¸¡ôÒ «ÊôÀ¨¼ Å¢ÕôÀò§¾÷׸û" #: ../../any.pm_.c:1092 msgid "Please choose the desired security level" msgstr "¯í¸ÙìÌ §¾¨ÅÂ¡É À¡Ð¸¡ôÒ ¿¢¨Ä¨Âò §¾÷×î ¦ºöÂ×õ" #: ../../any.pm_.c:1095 msgid "Security level" msgstr "À¡Ð¸¡ôÒ ¿¢¨Ä" #: ../../any.pm_.c:1097 msgid "Use libsafe for servers" msgstr "libsafe ±ýÈ áĸ¿¢Ã¨Ä ÀâÁ¡È¢¸Ç¢ø ÀÂýÀÎòÐí¸û" #: ../../any.pm_.c:1098 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "þó¾ áĸ¿¢Ã¨Ä ÀÂýÀÎòО¡ø ÀÄ À¡Ð¸¡ôÒ À¢Ã¨É¸¨Ç ¾Å¢÷ì¸ ÓÊÔõ" #: ../../any.pm_.c:1099 msgid "Security Administrator (login or email)" msgstr "À¡Ð¸¡ôÒ §ÁÄ¡Ç÷(¦ÀÂ÷ «øÄÐ Á¢ýÉïºø Ó¸Åâ)" #: ../../any.pm_.c:1189 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "¿£í¸û ÀÂýÀÎò¾Å¢ÕìÌõ ÀÄŨ¸ Å¢¨ºôÀĨ¸ þ¼ «¨Á׸¨Ç\n" "Á¡üÈ ±ó¾ Å¢¨º «øÄРިº §º÷Á¡Éí¸¨Ç §¾÷×î ¦ºö¸\n" "(¯¾¡ÃÉò¾¢üÌ ¾Á¢ú ÁüÚõ ¬í¸¢Äõ)" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:375 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "%s þÂì¸ ¿¢Ãø §¾÷Å¡ÇÕìÌ Å¡Õí¸û\n" "\n" "¯í¸ÙìÌ §¾¨ÅÂ¡É þÂì¸ ¿¢Ã¨Ä §¾÷×î ¦ºöÔí¸û\n" "«øÄÐ %d Å¢¿¡Ê¸ÙìÌ À¢ÈÌ ¦¸¡¼¡¿¢¨Ä þÂì¸ ¿¢Ãø ÐÅí¸¢Å¢Îõ\n" "\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:935 msgid "Welcome to GRUB the operating system chooser!" msgstr "ìÃô þÂì¸ ¿¢Ãø §¾÷Å¡ÇÕìÌ Å¡Õí¸û" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:938 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "%c ÁüÚõ %c Å¢¨º¸û ÓÄõ ¯í¸û §¾÷¨Å §¾÷ó¦¾Îí¸û " #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:941 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Å §¾÷ó¦¾Îò¾ þÂì¸ ¿¢Ãø ÐÅí¸ Ñ¨Æ× º¡Å¢¨Â ¾ðÎí¸û, Á¡üÈí¸û ¦ºö 'e' Å¢¨º" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:944 msgid "commands before booting, or 'c' for a command-line." msgstr "¦¾¡¼íÌžüÌ Óý þÂì¸ôÀ¼§ÅñÊ ¸ð¼¨Ç¸û , «øÄÐ Ó¨ÉÂò¾¢üÌî ¦ºøÄ 'c' Å¢¨º" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:947 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "%d Å¢¿¡Ê¸ÙìÌ À¢ÈÌ §¾÷ó¦¾Îò¾ þÂì¸ ¿¢Ãø ÐÅí¸¢Å¢Îõ" #: ../../bootloader.pm_.c:951 msgid "not enough room in /boot" msgstr "/boot «¨¼Å¢ø §À¡¾¢Â þ¼Á¢ø¨Ä" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1051 msgid "Desktop" msgstr "§Á¨º" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1053 msgid "Start Menu" msgstr "¦¾¡¼ì¸ÀðÊ" #: ../../bootloader.pm_.c:1072 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "%s þó¾ Ÿ¢÷ ¯í¸û ÐÅíÌ¿¢Ã¨Ä ²üÚì ¦¸¡ûÇ¡Ð\n" #: ../../bootlook.pm_.c:45 msgid "no help implemented yet.\n" msgstr "þýÛõ ¯¾Å¢ ¾Â¡Ã¡¸Å¢ø¨Ä.\n" #: ../../bootlook.pm_.c:61 msgid "Boot Style Configuration" msgstr "¦¾¡¼í¸ø À¡ó¾ ÅÊŨÁôÒ" #: ../../bootlook.pm_.c:78 ../../harddrake/ui.pm_.c:59 #: ../../harddrake/ui.pm_.c:60 ../../standalone/drakfloppy_.c:81 #: ../../standalone/logdrake_.c:101 msgid "/_File" msgstr "/_§¸¡ôÒ" #: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82 #: ../../standalone/logdrake_.c:107 msgid "/File/_Quit" msgstr "/§¸¡ôÒ/_¦ÅǢø" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:60 #: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:90 msgid "NewStyle Categorizing Monitor" msgstr "Ò¾¢Â Ũ¸ôÀÎò¾ôÀð¼ Ó¸ôÒ" #: ../../bootlook.pm_.c:91 msgid "NewStyle Monitor" msgstr "Ò¾¢Â Ó¸ôÒ" #: ../../bootlook.pm_.c:92 msgid "Traditional Monitor" msgstr "À¨Æ ӸôÒ" #: ../../bootlook.pm_.c:93 msgid "Traditional Gtk+ Monitor" msgstr "À¨Æ Gtk+ Ó¸ôÒ" #: ../../bootlook.pm_.c:94 msgid "Launch Aurora at boot time" msgstr "«§Ã¡Ã¨Å ÐÅíÌõ§À¡§¾ ÐÅ츢ŢÎ" #: ../../bootlook.pm_.c:97 msgid "Lilo/grub mode" msgstr "Ä¢§Ä¡/ìÃô ӨȨÁ" #: ../../bootlook.pm_.c:97 msgid "Yaboot mode" msgstr "¡¦¾¡¼ì¸ ӨȨÁ" #: ../../bootlook.pm_.c:143 msgid "Install themes" msgstr "¯Õì¸Õì¸¨Ç ¿¢Ú×í¸û" #: ../../bootlook.pm_.c:144 msgid "Display theme under console" msgstr "¯Õì¸Õì¸¨Ç Ó¨ÉÂò¾¢ý ¸£ú ¸¡ðÎí¸û" #: ../../bootlook.pm_.c:166 msgid "Can't create Bootsplash preview" msgstr "¦¾¡¼íÌÀ¼ Óý§É¡ð¼ò¨¾ ¯ÕÅ¡ì¸ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:166 ../../bootlook.pm_.c:184 ../../bootlook.pm_.c:187 #: ../../bootlook.pm_.c:190 ../../bootlook.pm_.c:220 ../../bootlook.pm_.c:222 #: ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:241 ../../bootlook.pm_.c:248 #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:336 #: ../../diskdrake/interactive.pm_.c:351 ../../diskdrake/interactive.pm_.c:464 #: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67 #: ../../install_steps_interactive.pm_.c:365 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/diskdrake_.c:80 msgid "Error" msgstr "À¢¨Æ" #: ../../bootlook.pm_.c:183 #, c-format msgid "Backup %s to %s.old" msgstr "%s ±ýÀ¨¾ %s.old ±É ¸¡ô¦ÀÎ" #: ../../bootlook.pm_.c:184 msgid "unable to backup lilo message" msgstr "Ä¢§Ä¡ ¾¸Å¨Ä ¸¡ô¦ÀÎì¸ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:186 #, c-format msgid "Copy %s to %s" msgstr "%s ±ýÀ¨¾ %s ±É ¿¸¦ÄÎ" #: ../../bootlook.pm_.c:187 msgid "can't change lilo message" msgstr "Ä¢§Ä¡ ¾¸Å¨Ä Á¡üÈ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:190 msgid "Lilo message not found" msgstr "Ä¢§Ä¡ ¾¸Å¨Ä ¸¡½ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:220 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "/etc/sysconfig/bootsplash.±ýÈ §¸¡ô¨À ¯ÕÅ¡ì¸ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:220 #, c-format msgid "Write %s" msgstr "%s ±ØÐ" #: ../../bootlook.pm_.c:222 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "/etc/sysconfig/bootsplash ±ýÈ §¸¡ôÀ¢ø ±Ø¾ ÓÊÂÅ¢ø¨Ä\n" "þó¾ ¦ÀÂâø §¸¡ô¨À ¸¡½ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:233 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "mkinitrd -f /boot/initrd-%s.img %s ±ýÀ¨¾ ÐÅì¸ ÓÊÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:236 #, c-format msgid "Make initrd 'mkinird -f /boot/initrd-%s.img %s'." msgstr "'mkinird -f /boot/initrd-%s.img %s'.ÐÅíÌ¿¢ÃÖÕÅò¨¾ ¯ÕÅ¡ìÌ" #: ../../bootlook.pm_.c:242 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "Ä¢§Ä¡¨Å Á£ñÎõ ÐÅì¸ ÓÊÂÅ¢ø¨Ä\n" "\"lilo\" ±ýÈ ¸ð¼¨Ç¨Â ¿¢÷Å¡¸¢Â¡¸ Á¡È¢ì ¦¸¡Î" #: ../../bootlook.pm_.c:246 msgid "Relaunch 'lilo'" msgstr "Ä¢§Ä¡¨Å Á£ñÎõ ÐÅìÌ" #: ../../bootlook.pm_.c:248 msgid "Notice" msgstr "ÌÈ¢ôÒ" #: ../../bootlook.pm_.c:249 msgid "LiLo and Bootsplash themes installation successfull" msgstr "Ä¢§Ä¡, ¦¾¡¼íÌÀ¼ ¯Õì¸Õì¸û ¿¢Ú×¾ø ¦ÅüȢ¨¼ó¾Ð" #: ../../bootlook.pm_.c:249 msgid "Theme installation failed!" msgstr "¯Õì¸Õì¸û ¿¢Ú×¾ø ¦ÅüȢ¨¼ÂÅ¢ø¨Ä" #: ../../bootlook.pm_.c:258 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "¿£í¸û ¾ü§À¡Ð %s ¦¾¡¼í̾ø §ÁÄ¡ÇḠÀÂýÀÎòи¢È£÷¸û\n" "«¨ÁôÒ Á¡Â¡Å¢¨Â ÐÅì¸ ÅÊŨÁ ±ýÈ ¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºö" #: ../../bootlook.pm_.c:260 ../../standalone/drakbackup_.c:2352 #: ../../standalone/drakbackup_.c:2362 ../../standalone/drakbackup_.c:2372 #: ../../standalone/drakbackup_.c:2380 ../../standalone/drakgw_.c:592 #: ../../standalone/tinyfirewall_.c:58 msgid "Configure" msgstr "ÅÊŨÁ" #: ../../bootlook.pm_.c:267 msgid "Splash selection" msgstr "¦¾¡¼íÌò¾¢¨Ã §¾÷×" #: ../../bootlook.pm_.c:270 msgid "Themes" msgstr "¯Õì¸Õì¸û" #: ../../bootlook.pm_.c:272 msgid "" "\n" "Select a theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" "\n" "Ä¢§Ä¡ ÁüÚõ ¦¾¡¼íÌò¾¢¨ÃìÌ\n" "¯Õì¸Õì¸¨Ç §¾÷× ¦ºö,\n" "þÃñ¨¼Ôõ ¾É¢Â¡¸×õ §¾÷×\n" "¦ºöÂÄ¡õ" #: ../../bootlook.pm_.c:275 msgid "Lilo screen" msgstr "Ä¢§Ä¡ ¾¢¨Ã" #: ../../bootlook.pm_.c:279 msgid "Bootsplash" msgstr "¦¾¡¼íÌò¾¢¨Ã" #: ../../bootlook.pm_.c:314 msgid "System mode" msgstr "þÂì¸ Ó¨È¨Á" #: ../../bootlook.pm_.c:316 msgid "Launch the graphical environment when your system starts" msgstr "þÂì¸ò ¦¾¡¼ì¸ò¾¢ø ŨÃÅ¢ÂøÅÆ¢ ӨȨÁìÌî ¦ºøÄ×õ" #: ../../bootlook.pm_.c:321 msgid "No, I don't want autologin" msgstr "þø¨Ä, ±ÉìÌ ¾ýÉ¢Âì¸ò ¦¾¡¼í¸ø §Åñ¼¡õ" #: ../../bootlook.pm_.c:323 msgid "Yes, I want autologin with this (user, desktop)" msgstr "¬õ, ±ÉìÌ ¾ýÉ¢Âì¸ò ¦¾¡¼í¸ø (ÀÂÉ÷,§Á¨ºÂ¨ÁôÒ) §ÅñÎõ" #: ../../bootlook.pm_.c:333 ../../network/netconnect.pm_.c:101 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 #: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:3513 #: ../../standalone/drakbackup_.c:4290 ../../standalone/drakconnect_.c:108 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667 #: ../../standalone/drakfloppy_.c:376 ../../standalone/drakfont_.c:612 #: ../../standalone/drakfont_.c:799 ../../standalone/drakfont_.c:876 #: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:521 msgid "OK" msgstr "ºÃ¢" #: ../../bootlook.pm_.c:403 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "/etc/inittab ±ýÈ §¸¡ô¨À ¾¢Èì¸ ÓÊÂÅ¢ø¨Ä: %s" #: ../../common.pm_.c:94 msgid "GB" msgstr "GB " #: ../../common.pm_.c:94 msgid "KB" msgstr "KB" #: ../../common.pm_.c:94 msgid "MB" msgstr "MB" #: ../../common.pm_.c:102 msgid "TB" msgstr "TB" #: ../../common.pm_.c:110 #, c-format msgid "%d minutes" msgstr "%d ¿¢Á¢¼í¸û" #: ../../common.pm_.c:112 msgid "1 minute" msgstr "1 ¿¢Á¢¼õ" #: ../../common.pm_.c:114 #, c-format msgid "%d seconds" msgstr "%d Å¢¿¡Ê¸û" #: ../../common.pm_.c:159 msgid "Can't make screenshots before partitioning" msgstr "Ÿ¢÷¾ø ÓÊžüÌ Óý ¿¢¸Æ¢­ÕôÒ ±Îì¸ ÓÊ¡Ð" #: ../../common.pm_.c:166 #, c-format msgid "Screenshots will be available after install in %s" msgstr "¿¢ÚÅ¢ ÓÊò¾×¼ý ¿¢¸Æ¢­ÕôÒ¸û %s ¸¢¨¼ìÌõ" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:113 msgid "France" msgstr "À¢ÃïÍ" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "§¸¡Š¼¡ ⸡" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:116 msgid "Belgium" msgstr "¦Àøƒ¢Âõ" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "¦ºì ÌÊÂÃÍ" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "¦ƒ÷ÁÉ¢" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "¸¢§Ãì¸õ" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "¿¡÷§Å" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "ÍÅ¢¼ý" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:114 msgid "Netherlands" msgstr "¦¿¾÷Ä¡óÐ" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:115 ../../standalone/drakxtv_.c:68 msgid "Italy" msgstr "þò¾¡Ä¢" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "¬Š¾¢Ã¢Â¡" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:117 msgid "United States" msgstr "«¦Áâ측" #: ../../detect_devices.pm_.c:599 ../../detect_devices.pm_.c:641 #: ../../detect_devices.pm_.c:803 msgid "Unknown Model" msgstr "¦¾Ã¢Â¡¾ º¡¾Éõ" #: ../../diskdrake/dav.pm_.c:23 msgid "New" msgstr "Ò¾¢Â" #: ../../diskdrake/dav.pm_.c:57 msgid "Server" msgstr "§º¨Å¸õ" #: ../../diskdrake/dav.pm_.c:58 ../../diskdrake/interactive.pm_.c:375 #: ../../diskdrake/interactive.pm_.c:558 ../../diskdrake/interactive.pm_.c:585 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15 #: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "²üÈô ÒûÇ¢" #: ../../diskdrake/dav.pm_.c:68 msgid "Please enter the WebDAV server URL" msgstr "¾Â×öÐ §º¨Å¸ò¾¢ý URL «Êì¸×õ" #: ../../diskdrake/dav.pm_.c:71 msgid "The URL must begin with http:// or https://" msgstr "URL ±ô§À¡Ðõ http:// «øÄÐ https:// ±Éò ¦¾¡¼í¸§ÅñÎõ" #: ../../diskdrake/dav.pm_.c:92 msgid "Server: " msgstr "§º¨Å¸õ: " #: ../../diskdrake/dav.pm_.c:93 ../../diskdrake/interactive.pm_.c:435 #: ../../diskdrake/interactive.pm_.c:1079 #: ../../diskdrake/interactive.pm_.c:1153 msgid "Mount point: " msgstr "²üÈô ÒûÇ¢: " #: ../../diskdrake/dav.pm_.c:94 ../../diskdrake/interactive.pm_.c:1159 #, c-format msgid "Options: %s" msgstr "Å¢ÕôÀò§¾÷׸û: %s" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "¾ÂצºöÐ ¯í¸ÙìÌ §¾¨ÅÂ¡É «¨Éò¨¾Ôõ ¸¡ô¦ÀÎòÐ즸¡ûÇ×õ" #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:924 #: ../../diskdrake/interactive.pm_.c:933 ../../diskdrake/interactive.pm_.c:999 msgid "Read carefully!" msgstr "¸ÅÉÁ¡¸ ÀÊì¸×õ" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "±¦¾¡¼í¸ø " #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "Á¡Â¡Å¢... " #: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "þÂì¸ò¨¾ §¾÷×î ¦ºö " #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "¯í¸û Å¢ý§¼¡Š Ÿ¢÷\n" "Á¢¸ô¦À⾡¸ ¯ûÇÐ .\n" "«¨¾ ¿£í¸û Á¡üȢ¨Áì¸ ¿¡ý «È¢×ÕòЧÅý\n" "(\"Á¡üȢ¨Á\" ±ýÀ¾ý Á£Ð ¸¢Ç¢ì ¦ºö)" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "Please click on a partition" msgstr "¾ÂצºöРŸ¢÷ ´ý¨È §¾÷ó¦¾Îì¸×õ" #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:471 msgid "Details" msgstr "Å¢ÅÃí¸û" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2 §¸¡ôÀ¨ÁôÒ" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "FAT" msgstr "FAT §¸¡ôÀ¨ÁôÒ" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "HFS" msgstr "HFS §¸¡ôÀ¨ÁôÒ" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Journalised FS" msgstr "¾¡Ç¢¨¸Â¡É §¸¡ôÀ¨ÁôÒ" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "SunOS" msgstr "ºýþÂ츿¢Ãø" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Swap" msgstr "þ¼Á¡üÚ" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1095 msgid "Empty" msgstr "´ýÚÁ¢ø¨Ä" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:331 #: ../../install_steps_gtk.pm_.c:389 ../../mouse.pm_.c:162 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1679 msgid "Other" msgstr "ÁüȨÅ" #: ../../diskdrake/hd_gtk.pm_.c:328 msgid "Filesystem types:" msgstr "§¸¡ôÀ¨ÁôÒ Å¨¸¸û:" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:397 msgid "Create" msgstr "¯ÕÅ¡ìÌ" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:376 #: ../../diskdrake/interactive.pm_.c:521 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "Ũ¸: " #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347 #, c-format msgid "Use ``%s'' instead" msgstr "À¾¢Ä¡¸ ``%s'' ³ ÀÂýÀÎòÐ" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:385 msgid "Delete" msgstr "¿£ìÌ" #: ../../diskdrake/hd_gtk.pm_.c:351 msgid "Use ``Unmount'' first" msgstr "ӾĢø þÈìÌ ¸ð¼¨Ç¨Â ÀÂýÀÎòÐ" #: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:513 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr " %s, ±ýÈ Å¸¢÷ «¾ý Ũ¸¨Â Á¡üÈ¢Â×¼ý, «¾Ä¢Õó¾ ¾¸Åø «¨Éò¨¾Ôõ þÆóÐÅ¢Îõ" #: ../../diskdrake/interactive.pm_.c:173 msgid "Choose a partition" msgstr "Ÿ¢÷ ´ý¨È §¾÷×î ¦ºö" #: ../../diskdrake/interactive.pm_.c:173 msgid "Choose another partition" msgstr "§ÅÚ Å¸¢÷ ´ý¨È §¾÷×î ¦ºö " #: ../../diskdrake/interactive.pm_.c:198 msgid "Exit" msgstr "¦ÅǢø" #: ../../diskdrake/interactive.pm_.c:220 msgid "Toggle to expert mode" msgstr "«È¢»÷ ӨȨÁìÌ Á¡Ú" #: ../../diskdrake/interactive.pm_.c:220 msgid "Toggle to normal mode" msgstr "º¡¾¡ÃÉ÷ ӨȨÁìÌ Á¡Ú" #: ../../diskdrake/interactive.pm_.c:220 msgid "Undo" msgstr "¦ºÂø¿£ìÌ" #: ../../diskdrake/interactive.pm_.c:239 msgid "Continue anyway?" msgstr "±ôÀÊÔõ ¦¾¡¼Ãž¡?" #: ../../diskdrake/interactive.pm_.c:244 msgid "Quit without saving" msgstr "§ºÁ¢ì¸¡Áø ¦ÅǢø" #: ../../diskdrake/interactive.pm_.c:244 msgid "Quit without writing the partition table?" msgstr "Á¡üÈí¸¨Ç ¾ðÊø §ºÁ¢ì¸¡Áø ¦ÅǢø" #: ../../diskdrake/interactive.pm_.c:249 msgid "Do you want to save /etc/fstab modifications" msgstr " /etc/fstab Á¡üÈí¸¨Ç ¾ðÊø §ºÁ¢ì¸ §ÅñÎÁ¡" #: ../../diskdrake/interactive.pm_.c:261 msgid "Auto allocate" msgstr "¾¡É¢Âì¸ ÅÌò¾ø" #: ../../diskdrake/interactive.pm_.c:261 msgid "Clear all" msgstr "«¨Éò¨¾Ôõ Á¡üȢ¨Á" #: ../../diskdrake/interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:214 msgid "More" msgstr "§ÁÖõ" #: ../../diskdrake/interactive.pm_.c:264 msgid "Hard drive information" msgstr "Åý¾ð¨¼ ÀüȢ ¾¸Åø" #: ../../diskdrake/interactive.pm_.c:294 msgid "All primary partitions are used" msgstr "¦¾¡¼ì¸ Ÿ¢÷ «¨ÉòÐõ À¹ÉÀ¡ðÊø ¯ûÇÐ" #: ../../diskdrake/interactive.pm_.c:295 msgid "I can't add any more partition" msgstr "þ¾üÌ §Áø Ÿ¢÷ ±¾¨ÉÔõ §º÷ì¸ ÓÊ¡Ð" #: ../../diskdrake/interactive.pm_.c:296 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "§ÁÖõ Ÿ¢÷ ±¾¨ÉÔõ §º÷ì¸ §ÅñÎÁ¡É¡ø, ¦¾¡¼ì¸ Ÿ¢÷ ´ý¨È ¿£ì¸¢ Å¢ðÎ Ò¾¢Â ¿£ðÊôÒ Å¸¢" "÷ ´ý¨È ¯ÕÅ¡ì¸×õ" #: ../../diskdrake/interactive.pm_.c:306 msgid "Save partition table" msgstr "Á¡üÈí¸¨Ç ¾ðÊø §ºÁ¢ì¸×õ" #: ../../diskdrake/interactive.pm_.c:307 msgid "Restore partition table" msgstr "¾ðÊý Ÿ¢÷ «¨ÁôÒ¸¨Ç À¨Æ ¿¢¨ÄìÌ ¦¸¡ñÎ Å¡Õí¸û" #: ../../diskdrake/interactive.pm_.c:308 msgid "Rescue partition table" msgstr "¾ðÊý Ÿ¢÷ «¨ÁôÒ¸¨Ç Á£ð¸×õ" #: ../../diskdrake/interactive.pm_.c:310 msgid "Reload partition table" msgstr "¾ðÊý Ÿ¢÷ «¨ÁôÒ¸¨Ç ÒÐì¸ø ¦ºöÂ×õ" #: ../../diskdrake/interactive.pm_.c:315 msgid "Removable media automounting" msgstr "¸ÆüÚ °¼¸í¸û ¾¡§ÉüÈõ" #: ../../diskdrake/interactive.pm_.c:324 ../../diskdrake/interactive.pm_.c:344 msgid "Select file" msgstr "§¸¡ô¨À §¾÷×î ¦ºö" #: ../../diskdrake/interactive.pm_.c:331 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "¸¡ôÀ¢ø ¯ûÇ ¾ðÊý Ÿ¢÷ «¨ÁôÀ¢ý «Ç× §ÅÈ¡¸ ¯ûÇÐ\n" "¦¾¡¼÷óÐ` ¦ºøÄÄ¡Á¡?" #: ../../diskdrake/interactive.pm_.c:345 msgid "Warning" msgstr "±îºÃ¢ì¨¸" #: ../../diskdrake/interactive.pm_.c:346 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "¦¿¸¢ú¾ð¨¼ ¦ºÕÌí¸û\n" "þó¾ ¾ðÊø þÕìÌõ ¾¸ÅĨÉòõ «Æ¢óÐÅ¢Îõ" #: ../../diskdrake/interactive.pm_.c:357 msgid "Trying to rescue partition table" msgstr "¾ðÊý Ÿ¢÷ «¨ÁôÒ¸¨Ç Á£ð¸ ÓÂø¸¢§Èý" #: ../../diskdrake/interactive.pm_.c:363 msgid "Detailed information" msgstr "Å¢Ã¢Å¡É ¾¸Åø" #: ../../diskdrake/interactive.pm_.c:378 ../../diskdrake/interactive.pm_.c:652 msgid "Resize" msgstr "Á¡üȢ¨Á " #: ../../diskdrake/interactive.pm_.c:379 ../../diskdrake/interactive.pm_.c:705 msgid "Move" msgstr "¿¸÷òÐ" #: ../../diskdrake/interactive.pm_.c:380 msgid "Format" msgstr "ÅÊçðÎ" #: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "²üÚ" #: ../../diskdrake/interactive.pm_.c:382 msgid "Add to RAID" msgstr "RAID ¯¼ý §º÷" #: ../../diskdrake/interactive.pm_.c:383 msgid "Add to LVM" msgstr "LVM ¯¼ý §º÷" #: ../../diskdrake/interactive.pm_.c:384 ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "þÈìÌ" #: ../../diskdrake/interactive.pm_.c:386 msgid "Remove from RAID" msgstr "RAID þÕóÐ ¿£ìÌ" #: ../../diskdrake/interactive.pm_.c:387 msgid "Remove from LVM" msgstr "LVM þÕóÐ ¿£ìÌ" #: ../../diskdrake/interactive.pm_.c:388 msgid "Modify RAID" msgstr "RAID Á¡üÚ" #: ../../diskdrake/interactive.pm_.c:389 msgid "Use for loopback" msgstr "¸ñ½¢Â¡¸ ÀÂýÀÎ" #: ../../diskdrake/interactive.pm_.c:428 msgid "Create a new partition" msgstr "Ÿ¢÷ ´ý¨È ¯ÕÅ¡ì¸Ì " #: ../../diskdrake/interactive.pm_.c:431 msgid "Start sector: " msgstr "¬ÃõÀ Å¢ø: " #: ../../diskdrake/interactive.pm_.c:433 ../../diskdrake/interactive.pm_.c:805 msgid "Size in MB: " msgstr "¦Á¸¡¨ÀðÊø «Ç×: " #: ../../diskdrake/interactive.pm_.c:434 ../../diskdrake/interactive.pm_.c:806 msgid "Filesystem type: " msgstr "§¸¡ôÀ¨ÁôÒ Å¨¸: " #: ../../diskdrake/interactive.pm_.c:439 msgid "Preference: " msgstr "Å¢ÕôÀí¸û: " #: ../../diskdrake/interactive.pm_.c:464 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Ÿ¢÷ ´ý¨È ¯ÕÅ¡ì¸ ÓÊ¡Ð\n" "«¾¢¸À𺠦¾¡¼ì¸ Ÿ¢÷ ²ü¸É§Å ¯ûÇÐ.\n" "´Õ ¦¾¡¼ì¸ Ÿ¢÷ ´ý¨È ¿£ì¸¢ Å¢ðÎ ¿£ðÊôÒ Å¸¢÷ ´ý¨È ¯ÕÅ¡ìÌí¸û" #: ../../diskdrake/interactive.pm_.c:494 msgid "Remove the loopback file?" msgstr "¸ñ½¢Â¢ý §¸¡ô¨À ¿£ì¸Å¡?" #: ../../diskdrake/interactive.pm_.c:519 msgid "Change partition type" msgstr "Ÿ¢÷ Ũ¸¨Â Á¡üÚ: " #: ../../diskdrake/interactive.pm_.c:520 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "¿£í¸û ±ó¾ §¸¡ôÀ¨Áô¨À ÀÂýÀÎò¾ §À¡¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:526 msgid "Switching from ext2 to ext3" msgstr "ext2 ¢ĢÕóÐ ext3 §¸¡ôÀ¨ÁôÀ¢üÌ Á¡Ú¸¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:556 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "¯í¸û ¸ñ½¢ §¸¡ôÒ %s ±íÌ ²üÈ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:557 #, c-format msgid "Where do you want to mount device %s?" msgstr "¯í¸û %s Å𨼠±íÌ ²üÈ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:563 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "²ü¸É§Å ÀÂÉ£ðÊø ¯ûǾ¡ø ²üÈôÒûÇ¢¨Â ÀÂýÀÎò¾ ÓÊ¡Ð.\n" "ӾĢø ¸ñ½¢Â¢ý §¸¡ô¨À ¿£ìÌí¸û" #: ../../diskdrake/interactive.pm_.c:584 #, c-format msgid "Where do you want to mount %s?" msgstr "¯í¸û %s Å𨼠±íÌ ²üÈ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:608 msgid "Computing FAT filesystem bounds" msgstr "FAT §¸¡ôÀ¨ÁôÒ «Ç׸û «Çì¸ôÀθ¢ýÈÉ" #: ../../diskdrake/interactive.pm_.c:608 ../../diskdrake/interactive.pm_.c:667 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "Á¡üȢ¨Áì¸ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:640 msgid "This partition is not resizeable" msgstr "þó¾ Ÿ¢÷ Á¡üȢ¨Áì¸ôÀ¼ ÓÊ¡¾Ð" #: ../../diskdrake/interactive.pm_.c:645 msgid "All data on this partition should be backed-up" msgstr "¾ÂצºöÐ ¯í¸ÙìÌ §¾¨ÅÂ¡É «¨Éò¨¾Ôõ ¸¡ô¦ÀÎòÐ즸¡ûÇ×õ" #: ../../diskdrake/interactive.pm_.c:647 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s, Á¡üȢ¨Áò¾ À¢ÈÌ «¨Éò¨¾Ôõ «Æ¢òРŢÎõ" #: ../../diskdrake/interactive.pm_.c:652 msgid "Choose the new size" msgstr "Ò¾¢Â «Ç¨Å §¾÷×î ¦ºöÂ×õ" #: ../../diskdrake/interactive.pm_.c:653 msgid "New size in MB: " msgstr "Ò¾¢Â «Ç¨Å ¦Á¸¡ ¨ÀðÊø : " #: ../../diskdrake/interactive.pm_.c:706 msgid "Which disk do you want to move it to?" msgstr "¿£í¸û ±ó¾ ÅðÊüÌ Á¡üÈ §À¡¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:707 msgid "Sector" msgstr "Å¢ø" #: ../../diskdrake/interactive.pm_.c:708 msgid "Which sector do you want to move it to?" msgstr "¿£í¸û ±ó¾ Å¢øÄ¢üÌ Á¡üÈ §À¡¸¢È£÷¸û?" #: ../../diskdrake/interactive.pm_.c:711 msgid "Moving" msgstr "Á¡üÈôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:711 msgid "Moving partition..." msgstr "Ÿ¢÷¸û Á¡üÈôÀθ¢ÈÐ ..." #: ../../diskdrake/interactive.pm_.c:728 msgid "Choose an existing RAID to add to" msgstr "²ü¸É§Å þÕìÌõ RAID ¯¼ý §º÷" #: ../../diskdrake/interactive.pm_.c:729 ../../diskdrake/interactive.pm_.c:746 msgid "new" msgstr "Ò¾¢Â" #: ../../diskdrake/interactive.pm_.c:744 msgid "Choose an existing LVM to add to" msgstr "²ü¸É§Å þÕìÌõ LVM ¯¼ý §º÷" #: ../../diskdrake/interactive.pm_.c:749 msgid "LVM name?" msgstr "LVM ¦ÀÂ÷" #: ../../diskdrake/interactive.pm_.c:790 msgid "This partition can't be used for loopback" msgstr "þó¾ Ÿ¢÷ ¸ñ½¢Â¡¸ ÀÂýÆÎò¾ ÓÊ¡Ð" #: ../../diskdrake/interactive.pm_.c:803 msgid "Loopback" msgstr "¸ñ½¢" #: ../../diskdrake/interactive.pm_.c:804 msgid "Loopback file name: " msgstr "¸ñ½¢ §¸¡ôÀ¢ý ¦ÀÂ÷: " #: ../../diskdrake/interactive.pm_.c:809 msgid "Give a file name" msgstr "§¸¡ôÀ¢üÌ ¦ÀÂ÷ ¦¸¡Îì¸×õ" #: ../../diskdrake/interactive.pm_.c:812 msgid "File already used by another loopback, choose another one" msgstr "þó¾ ¦ÀÂ÷ ÀÂýÀ¡ðÊø ¯ûÇÐ, §ÅÚ ¦ÀÂ÷ ¦¸¡Îì¸×õ" #: ../../diskdrake/interactive.pm_.c:813 msgid "File already exists. Use it?" msgstr "þó¾ §¸¡ôÒ ²ü¸É§Å ¯ûÇÐ. ÀÂýÀ¡Îò¾¢ ¦¸¡ûÇÄ¡Á¡?" #: ../../diskdrake/interactive.pm_.c:836 msgid "Mount options" msgstr "²üÈ Å¢ÕôÀò§¾÷׸û" #: ../../diskdrake/interactive.pm_.c:843 msgid "Various" msgstr "§ÅÚ" #: ../../diskdrake/interactive.pm_.c:907 ../../standalone/drakfloppy_.c:103 msgid "device" msgstr "º¡¾Éõ" #: ../../diskdrake/interactive.pm_.c:908 msgid "level" msgstr "¿¢¨Ä" #: ../../diskdrake/interactive.pm_.c:909 msgid "chunk size" msgstr "«Ç×" #: ../../diskdrake/interactive.pm_.c:924 msgid "Be careful: this operation is dangerous." msgstr "þó¾ ¦ºÂø «À¡Â¸ÃÁ¡ÉÐ. ¸ÅÉÁ¡¸ þÕì¸×õ" #: ../../diskdrake/interactive.pm_.c:939 msgid "What type of partitioning?" msgstr "±ó¾ Ũ¸ Ÿ¢÷?" #: ../../diskdrake/interactive.pm_.c:955 #, c-format msgid "The package %s is needed. Install it?" msgstr "%s ±ýÈ ¦À¡¾¢ ¿¢ÚÅôÀ¼§ÅñÎõ. µôÒ¾ø ¾Ã×õ?" #: ../../diskdrake/interactive.pm_.c:969 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "ÁýÉ¢ì¸×õ, /boot 1024 ¯Õ¨ÇìÌ §Áø ¯ÕÅ¡ì¸ Á¡ð§¼ý.\n" "¿£í¸û Ä¢§Ä¡ ÀÂýÀÎò¾¢É¡ø «Ð §Å¨Ä ¦ºö¡Ð. «øÄÐ ¿£í¸û Ä¢§Ä¡ ÀÂýÀÎò¾¡Å¢ð¼¡ø /" "boot ¯í¸ÙìÌ §¾¨Å¢ø¨Ä" #: ../../diskdrake/interactive.pm_.c:973 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "root (/) Ÿ¢÷ 1024 ¯Õ¨ÇìÌ §Áø ¯Õš츢 ¯û§Çý.\n" "¿£í¸û Ä¢§Ä¡ ÀÂýÀÎò¾¢É¡ø «Ð §Å¨Ä ¦ºöÂ. /boot §¾¨Å. «¾É¡ø /boot ¯ÕÅ¡ì¸×õ" #: ../../diskdrake/interactive.pm_.c:979 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "¯í¸û root (/) Ÿ¢÷ RAID Ũ¸Â¢ø ¯ûÇÐ.¿£í¸û Ä¢§Ä¡ ÀÂýÀÎò¾¢É¡ø «Ð §Å¨Ä ¦ºöÂ. /" "boot §¾¨Å. «¾É¡ø /boot ¯ÕÅ¡ì¸×õ" #: ../../diskdrake/interactive.pm_.c:999 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s ÅðÊý Ÿ¢÷ «¨ÁôÒ ¾ðÊø ±Ø¾ôÀ¼×ûÇÐ" #: ../../diskdrake/interactive.pm_.c:1003 msgid "You'll need to reboot before the modification can take place" msgstr "¿£í¸û ¦ºö¾ Á¡üÈí¸û §Å¨Ä ¦ºö ÁÚ ¦¾¡¼ì¸õ §¾¨Å" #: ../../diskdrake/interactive.pm_.c:1014 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "¾ÂצºöÐ ¯í¸ÙìÌ §¾¨ÅÂ¡É «¨Éò¨¾Ôõ ¸¡ô¦ÀÎòÐ즸¡ûÇ×õ %s ÅÊçðÊ À¢ÈÌ «¨ÉòРŢ" "ÅÃí¸¨ÇÔõ þÆóРŢÎÅ£÷¸û" #: ../../diskdrake/interactive.pm_.c:1016 msgid "Formatting" msgstr "ÅÊçð¼ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1017 #, c-format msgid "Formatting loopback file %s" msgstr "%s ¸ñ½¢ §¸¡ôÒ ÅÊçð¼ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1018 #: ../../install_steps_interactive.pm_.c:476 #, c-format msgid "Formatting partition %s" msgstr "%s Ÿ¢÷ ÅÊçð¼ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1029 msgid "Hide files" msgstr "§¸¡ôÒ¸¨Ç Á¨Èì¸×õ" #: ../../diskdrake/interactive.pm_.c:1029 msgid "Move files to the new partition" msgstr "§¸¡ôÒ¸¨Ç §ÅÚ Å¸¢÷ ´ýÚìÌ Á¡üÈ×õ" #: ../../diskdrake/interactive.pm_.c:1030 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "%s\n" "%s" #: ../../diskdrake/interactive.pm_.c:1041 msgid "Moving files to the new partition" msgstr "§¸¡ôÒ¸¨Ç §ÅÚ Å¸¢÷ ´ýÚìÌ Á¡üÈôÀθ¢ÈÐ " #: ../../diskdrake/interactive.pm_.c:1045 #, c-format msgid "Copying %s" msgstr "%s ¿¸¦ÄÎì¸Àθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1049 #, c-format msgid "Removing %s" msgstr "%s ¿£ì¸ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "partition %s is now known as %s" msgstr "%s Ÿ¢÷ þô§À¡Ð %s ±É ÅÆí¸ôÀθ¢ÈÐ" #: ../../diskdrake/interactive.pm_.c:1080 #: ../../diskdrake/interactive.pm_.c:1139 msgid "Device: " msgstr "º¡¾Éõ: " #: ../../diskdrake/interactive.pm_.c:1081 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr ": %s ¼¡Š þÂ츢 ±ñ\n" #: ../../diskdrake/interactive.pm_.c:1085 #: ../../diskdrake/interactive.pm_.c:1093 #: ../../diskdrake/interactive.pm_.c:1157 msgid "Type: " msgstr "Ũ¸: " #: ../../diskdrake/interactive.pm_.c:1089 msgid "Name: " msgstr "¸½¢½¢Â¢ý¦ÀÂ÷: " #: ../../diskdrake/interactive.pm_.c:1097 #, c-format msgid "Start: sector %s\n" msgstr "¬ÃõÀÅ¢ø %s\n" #: ../../diskdrake/interactive.pm_.c:1098 #, c-format msgid "Size: %s" msgstr "«Ç×: %s" #: ../../diskdrake/interactive.pm_.c:1100 #, c-format msgid ", %s sectors" msgstr ", %s Å¢ø" #: ../../diskdrake/interactive.pm_.c:1102 #, c-format msgid "Cylinder %d to %d\n" msgstr "%d Ó¾ø %d Ũà ¯ûÇ ¯Õ¨Ç¸û\n" #: ../../diskdrake/interactive.pm_.c:1103 msgid "Formatted\n" msgstr "ÅÊçð¼ôÀð¼Ð\n" #: ../../diskdrake/interactive.pm_.c:1104 msgid "Not formatted\n" msgstr "ÅÊçð¼ôÀð¼Å¢ø¨Ä\n" #: ../../diskdrake/interactive.pm_.c:1105 msgid "Mounted\n" msgstr "²üÈôÀðÎûÇÐ\n" #: ../../diskdrake/interactive.pm_.c:1106 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1108 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "¸ñ½¢ §¸¡ôÒ:\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1109 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "¦¸¡¼¡¿¢¨Ä¡¸ ¦¾¡¼í¸¢Â Ÿ¢÷\n" ".\n" #: ../../diskdrake/interactive.pm_.c:1111 #, c-format msgid "Level %s\n" msgstr "¿¢¨Ä %s\n" #: ../../diskdrake/interactive.pm_.c:1112 #, c-format msgid "Chunk size %s\n" msgstr "¦ÅðÎ «Ç×%s\n" #: ../../diskdrake/interactive.pm_.c:1113 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-Åðʸû %s\n" #: ../../diskdrake/interactive.pm_.c:1115 #, c-format msgid "Loopback file name: %s" msgstr "¸ñ½¢ §¸¡ôÀ¢ý ¦ÀÂ÷: %s" #: ../../diskdrake/interactive.pm_.c:1118 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "þó¾ Ÿ¢÷\n" "Ó츢ÂÁ¡ÉÐ\n" "þ¨¾ ´ýÚõ ¦ºö¡¾£÷¸û\n" #: ../../diskdrake/interactive.pm_.c:1121 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "þó¾ Ÿ¢÷ ¯í¸û\n" "¸½¢½¢ þÃñÎ þÂì¸ ¿¢Ãø¸Ùõ ÐÅí¸\n" "§¾¨Å\n" #: ../../diskdrake/interactive.pm_.c:1140 #, c-format msgid "Size: %s\n" msgstr "«Ç×: %s\n" #: ../../diskdrake/interactive.pm_.c:1141 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "§¸¡Éí¸û: %s ¯Õ¨Ç¸û, %s ¾¨Ä¸û, %s Å¢ü¸û\n" #: ../../diskdrake/interactive.pm_.c:1142 msgid "Info: " msgstr "¾¸Åø: " #: ../../diskdrake/interactive.pm_.c:1143 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-¾ðθû%s\n" #: ../../diskdrake/interactive.pm_.c:1144 #, c-format msgid "Partition table type: %s\n" msgstr "Ÿ¢÷ «¨ÁôÀ¢ý Ũ¸: %s\n" #: ../../diskdrake/interactive.pm_.c:1145 #, c-format msgid "on channel %d id %d\n" msgstr "%d ¾¼ò¾¢ø %d ¯ûÇÐ\n" #: ../../diskdrake/interactive.pm_.c:1175 msgid "Filesystem encryption key" msgstr "§¸¡ôÀ¨ÁôÒ Á¨ÈìÌȢ£ðÎî º¡Å¢" #: ../../diskdrake/interactive.pm_.c:1176 msgid "Choose your filesystem encryption key" msgstr "¯í¸û §¸¡ôÀ¨ÁôÒìÌ Á¨ÈìÌȢ£ðÎî º¡Å¢¨Â §¾÷×î ¦ºö" #: ../../diskdrake/interactive.pm_.c:1179 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "þó¾ Á¨ÈìÌȢ£ðÎî º¡Å¢ Á¢¸ ±Ç¢¾¡¸ ¯ûÇÐ %d «Ç× þÕ츧ÅñÎõ" #: ../../diskdrake/interactive.pm_.c:1180 msgid "The encryption keys do not match" msgstr "Á¨ÈìÌȢ£ðÎî º¡Å¢¸û þÃñÎõ ´ýÈ¡¸ þø¨Ä" #: ../../diskdrake/interactive.pm_.c:1183 msgid "Encryption key" msgstr "Á¨ÈìÌȢ£ðÎî º¡Å¢" #: ../../diskdrake/interactive.pm_.c:1184 msgid "Encryption key (again)" msgstr "Á¨ÈìÌȢ£ðÎî º¡Å¢(Á£ñÎõ)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "Ũ¸¨Â Á¡üÚ" #: ../../diskdrake/removable_gtk.pm_.c:28 msgid "Please click on a medium" msgstr "°¼¸ò¨¾ §¾÷×î ¦ºö" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "ÀÂÉ÷¦ÀÂ÷ %s ¦¾¡¼í¸ ÓÊÂÅ¢ø¨Ä(¾ÅÈ¡É ¸¼×¡ø?)" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "Å¢ý¸Ç ¿øÌâ¨Á §ÅñÎõ" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "Áü¦È¡ýÚ" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "±ó¾ ÀÂÉ÷¦ÀÂ÷" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "¾ÂצºöÐ ¯í¸û ÀÂÉ÷¦ÀÂ÷, ¸¼×¡ø, Å¢ý¸Çõ ¬¸¢ÂÅü¨È ¾ð¼×õ" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 msgid "Username" msgstr "ÀÂÉ÷¦ÀÂ÷" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "Å¢ý¸Çõ" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "§º¨Å¸ò¨¾ §¾Î" #: ../../fs.pm_.c:552 ../../fs.pm_.c:562 ../../fs.pm_.c:566 ../../fs.pm_.c:570 #: ../../fs.pm_.c:574 ../../fs.pm_.c:578 #, c-format msgid "%s formatting of %s failed" msgstr "%s §À¡ø %s ÅÊçðÊÂÐ ÓÊÂÅ¢ø¨Ä" #: ../../fs.pm_.c:615 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s þó¾ %s Ũ¸Â¢ø ÅÊçðÎÅÐ ±ôÀÊ ±É ±ÉìÌ ¦¾Ã¢Â¡Ð" #: ../../fs.pm_.c:687 ../../fs.pm_.c:731 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "%s Ÿ¢÷ %s «¨¼Å¢ø ²üÚž¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../fs.pm_.c:746 ../../partition_table.pm_.c:602 #, c-format msgid "error unmounting %s: %s" msgstr "þÈìÌž¢ø À¢¨Æ §¿÷óÐûÇÐ %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "±Ç¢Â" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "/usr ¯¼ý" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "ÀâÁ¡È¢" #: ../../fsedit.pm_.c:472 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS Ũ¸¨Â 16¦Á¸¡ ¨ÀðÎìÌ Ì¨ÈÅ¡É Å¸¢üÈ¢ø ÀÂýÀÎò¾ ÓÊ¡Ð" #: ../../fsedit.pm_.c:473 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS Ũ¸¨Â 32¦Á¸¡ ¨ÀðÎìÌ Ì¨ÈÅ¡É Å¸¢üÈ¢ø ÀÂýÀÎò¾ ÓÊ¡Ð" #: ../../fsedit.pm_.c:492 msgid "Mount points must begin with a leading /" msgstr "²üÈô ÒûÇ¢¸û / ¯¼ý ÁðÎõ ¾¡ý ¦¾¡¼í¸ §ÅñÎõ" #: ../../fsedit.pm_.c:493 #, c-format msgid "There is already a partition with mount point %s\n" msgstr " %s ±ýÈ ²üÈô ÒûÇ¢Ô¼ý ²ü¸É§Å Ÿ¢÷ ´ýÚ ¯ûÇÐ\n" #: ../../fsedit.pm_.c:497 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "%s ±ýÈ ²üÈô ÒûÇ¢¨Â LVM Ÿ¢÷ ¬¨¸Â¡ø ²üÈ ÓÊ¡Ð" #: ../../fsedit.pm_.c:499 msgid "This directory should remain within the root filesystem" msgstr "þó¾ «¨¼× ãÄ §¸¡ôÀ¨ÁôÀ¢ø þÕì¸ §ÅñÎõ" #: ../../fsedit.pm_.c:501 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "¿£í¸û þ¾¨É ²üÈ (ext2/ext3, reiserfs, xfs, or jfs) §À¡ýÈ §¸¡ôÀ¨ÁôÒ §¾¨Å\n" #: ../../fsedit.pm_.c:503 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Á¨ÈìÌȢ£Π¦ºöÂôÀð¼ Ÿ¢÷ %s ²üÈò¾¢üÌ ÀÂýÀÎò¾ ÓÊ¡Ð" #: ../../fsedit.pm_.c:570 msgid "Not enough free space for auto-allocating" msgstr "§À¡¾¢Â þ¼Á¢ø¨Ä" #: ../../fsedit.pm_.c:572 msgid "Nothing to do" msgstr "´ýÚõ ¦º¡øžü¸¢ø¨Ä" #: ../../fsedit.pm_.c:665 #, c-format msgid "Error opening %s for writing: %s" msgstr " %s þ¨¾ ¾¢Èì¸ ÓÊÂÅ¢ø¨Ä,%s þ¨¾ ±ØОü¸¡¸ ¾¢Èì¸ §ÅñÎõ" #: ../../fsedit.pm_.c:750 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "À¢¨Æ §¿÷óÐûÇÐ -¯í¸û Åý¦À¡Õ¨Çî §º¡¾¢ì¸×õ" #: ../../fsedit.pm_.c:773 msgid "You don't have any partitions!" msgstr "¿£í¸û Ÿ¢÷ ²Ðõ ¨Åò¾¢ø¨Ä" #: ../../harddrake/ui.pm_.c:15 msgid "Model" msgstr "Ũ¸" #: ../../harddrake/ui.pm_.c:15 msgid "hard disk model" msgstr "Åý¾ðÊý Ũ¸" #: ../../harddrake/ui.pm_.c:16 msgid "Channel" msgstr "¾¼õ" #: ../../harddrake/ui.pm_.c:16 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI ¾¼õ" #: ../../harddrake/ui.pm_.c:18 msgid "Bus" msgstr "À¡ð¨¼" #: ../../harddrake/ui.pm_.c:19 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "þó¾ À¡ð¨¼Â¢ø ¾¡ý þ¾Éõ ÀÂýÀθ¢ÈÐ(¯¾¡: PCI, USB, ...)" #: ../../harddrake/ui.pm_.c:20 msgid "Module" msgstr "ÜÚ" #: ../../harddrake/ui.pm_.c:20 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "þÂ츢 ¿¢ÃÄ¢ý ´Õ ÜÚ" #: ../../harddrake/ui.pm_.c:21 msgid "Media class" msgstr "°¼¸ Ũ¸" #: ../../harddrake/ui.pm_.c:21 msgid "class of hardware device" msgstr "Åý¦À¡ÕÇ¢ý Ũ¸" #: ../../harddrake/ui.pm_.c:22 ../../printerdrake.pm_.c:1404 msgid "Description" msgstr "ÌÈ¢ôÒ" #: ../../harddrake/ui.pm_.c:22 msgid "this field describe the device" msgstr "Åý¦À¡Õû Ũ¸¨Â ÀüȢ ¾¸Åø" #: ../../harddrake/ui.pm_.c:24 msgid "Bus identification" msgstr " À¡ð¨¼ «¨¼Â¡Çõ" #: ../../harddrake/ui.pm_.c:25 msgid "" "- PCI and USB devices : this list the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "PCI/USB º¡¾Éí¸û " #: ../../harddrake/ui.pm_.c:27 msgid "Location on the bus" msgstr "À¡ð¨¼Â¢ý þ¼õ" #: ../../harddrake/ui.pm_.c:28 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "- pci º¡¾Éí¸û - eide º¡¾Éí¸û - scsi º¡¾Éí¸û " #: ../../harddrake/ui.pm_.c:31 msgid "Old device file" msgstr "À¨Æ º¡¾É째¡ôÒ" #: ../../harddrake/ui.pm_.c:32 msgid "old static device name used in dev package" msgstr "À¨Æ º¡¾Éò¾¢ý ¦ÀÂ÷ º¡¾Éô¦À¡¾¢Â¢ø ÀÂýÀðÎûÇÐ" #: ../../harddrake/ui.pm_.c:33 msgid "New devfs device" msgstr "Ò¾¢Â devfs º¡¾Éõ" #: ../../harddrake/ui.pm_.c:34 msgid "new dinamic device name generated by incore kernel devfs" msgstr "" #: ../../harddrake/ui.pm_.c:35 msgid "Number of buttons" msgstr "¦À¡ò¾¡ý¸Ç¢ý ±ñ½¢ì¨¸" #: ../../harddrake/ui.pm_.c:36 msgid "the vendor name of the device" msgstr "º¡¾Éí¸Ç¢ý Å¢üÀÅ÷ ¦ÀÂ÷" #: ../../harddrake/ui.pm_.c:60 msgid "/_Quit" msgstr "/_¦ÅǢø" #: ../../harddrake/ui.pm_.c:61 ../../harddrake/ui.pm_.c:62 #: ../../harddrake/ui.pm_.c:68 ../../standalone/logdrake_.c:110 msgid "/_Help" msgstr "/_¯¾Å¢" #: ../../harddrake/ui.pm_.c:62 msgid "/_Help..." msgstr "/_¯¾Å¢..." #: ../../harddrake/ui.pm_.c:63 msgid "Harddrake help" msgstr "ʧÃìÅý¦À¡Õû ¯¾Å¢" #: ../../harddrake/ui.pm_.c:64 msgid "" "Description of the fields:\n" "\n" msgstr "" "ÒÄí¸Ç¢ý Å¢Çì¸õ\n" "\n" #: ../../harddrake/ui.pm_.c:68 msgid "/_About..." msgstr "/_ÀüÈ¢" #: ../../harddrake/ui.pm_.c:69 msgid "About Harddrake" msgstr "ʧÃìÅý¦À¡Õû ÀüÈ¢" #: ../../harddrake/ui.pm_.c:70 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" "þРʧÃìÅý¦À¡Õû, Á¡ýʧÃì Åý¦À¡Õû ÅÊŨÁìÀÒì ¸ÕÅ¢\n" "¦ÅǢ£Î" #: ../../harddrake/ui.pm_.c:71 msgid "Author:" msgstr "¬º¢Ã¢Â÷" #: ../../harddrake/ui.pm_.c:83 msgid "Harddrake2 version " msgstr "ʧÃìÅý¦À¡Õû2 ¦ÅǢ£Î" #: ../../harddrake/ui.pm_.c:91 msgid "Detected hardware" msgstr "¸ñÎÀ¢Êò¾ Åý¦À¡Õð¸Ç¢ý Å¢ÅÃí¸¨Çô À¡Õí¸û" #: ../../harddrake/ui.pm_.c:92 msgid "Configure module" msgstr "Üü¨È ÅÊŨÁÔí¸û" #: ../../harddrake/ui.pm_.c:92 msgid "Informations" msgstr "¾¸Åø" #: ../../harddrake/ui.pm_.c:92 msgid "Run config tool" msgstr "ÅÊŨÁôÒì ¸ÕÅ¢¨Â þÂìÌ" #: ../../harddrake/ui.pm_.c:96 msgid "Detection in progress" msgstr "þýÛõ §¾Î¾ø ¿¨¼¦ÀÚ¸¢ÈÐ" #: ../../harddrake/ui.pm_.c:96 ../../interactive.pm_.c:388 msgid "Please wait" msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ.." #: ../../harddrake/ui.pm_.c:139 msgid "primary" msgstr "¦¾¡¼ì¸¿¢¨Ä" #: ../../harddrake/ui.pm_.c:139 msgid "secondary" msgstr "þ¨¼¿¢¨Ä" #: ../../harddrake/ui.pm_.c:176 msgid "You can configure each parameter of the module here." msgstr "Üü¨È ¿£í¸û þí§¸ ÅÊŨÁì¸Ä¡õ" #: ../../harddrake/ui.pm_.c:192 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" ...¿¨¼¦ÀÚ¸¢ÈÐ" #: ../../harddrake/v4l.pm_.c:15 ../../harddrake/v4l.pm_.c:65 msgid "Auto-detect" msgstr "¾¡É¢Âì¸-¸ñÎÀ¢Êò¾ø" #: ../../harddrake/v4l.pm_.c:66 ../../harddrake/v4l.pm_.c:186 msgid "Unknown|Generic" msgstr "¦À¡ÐÅ¢É ¾¢¨Ã¸õ" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:99 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:210 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:213 msgid "Card model :" msgstr "" #: ../../harddrake/v4l.pm_.c:214 msgid "Tuner type :" msgstr "" #: ../../harddrake/v4l.pm_.c:215 msgid "Number of capture buffers :" msgstr "" #: ../../harddrake/v4l.pm_.c:215 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:217 msgid "PLL setting :" msgstr "PLL «¨ÁôÒì¸û" #: ../../harddrake/v4l.pm_.c:218 msgid "Radio support :" msgstr "" #: ../../harddrake/v4l.pm_.c:218 msgid "enable radio support" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.GNU/Linux is a multiuser system, and this " "means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." #: ../../help.pm_.c:41 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.Listed above are the existing Linux partitions " "detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." #: ../../help.pm_.c:72 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.The Mandrake Linux installation is spread out " "over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required" #: ../../help.pm_.c:77 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.It is now time to specify which programs you " "wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." #: ../../help.pm_.c:128 msgid "" "Finally, depending on whether or not you selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.Finally, depending on whether or not you " "selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." #: ../../help.pm_.c:164 msgid "" "You are now proposed to set up your Internet/network connection. If you\n" "wish to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``User Guide'' chapter about Internet connections for\n" "details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.You are now proposed to set up your Internet/" "network connection. If you\n" "wish to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``User Guide'' chapter about Internet connections for\n" "details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." #: ../../help.pm_.c:186 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.You may now choose which services you wish to " "start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" #: ../../help.pm_.c:203 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.GNU/Linux manages time in GMT (Greenwich Mean " "Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." #: ../../help.pm_.c:217 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible, depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.X (for X Window System) is the heart of the " "GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible, depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." #: ../../help.pm_.c:237 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" "even if X starts up correctly, DrakX then asks you if the configuration\n" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" "As a last resort, if you still cannot get X to work, choose \"Change\n" "graphics card\", select \"Unlisted card\", and when prompted on which\n" "server, choose \"FBDev\". This is a failsafe option which works with any\n" "modern graphics card. Then choose \"Test again\" to be sure." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.The first time you try the X configuration, " "you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" "even if X starts up correctly, DrakX then asks you if the configuration\n" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" "As a last resort, if you still cannot get X to work, choose \"Change\n" "graphics card\", select \"Unlisted card\", and when prompted on which\n" "server, choose \"FBDev\". This is a failsafe option which works with any\n" "modern graphics card. Then choose \"Test again\" to be sure." #: ../../help.pm_.c:249 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.Finally, you will be asked whether you want to " "see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." #: ../../help.pm_.c:256 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" "of your main disk (unless you are using another boot manager), to allow you\n" "to start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.The Mandrake Linux CD-ROM has a built-in " "rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" "of your main disk (unless you are using another boot manager), to allow you\n" "to start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." #: ../../help.pm_.c:280 msgid "" "At this point, you need to choose where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space, you will\n" "need to partition it. Basically, partitioning a hard drive consists of\n" "logically dividing it to create space to install your new Mandrake Linux\n" "system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" "From the installation interface, you can use the wizards as described here\n" "by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option;\n" "\n" " * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" "is installed on your hard drive and takes all the space available on it,\n" "you have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.At this point, you need to choose where you " "want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space, you will\n" "need to partition it. Basically, partitioning a hard drive consists of\n" "logically dividing it to create space to install your new Mandrake Linux\n" "system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" "From the installation interface, you can use the wizards as described here\n" "by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option;\n" "\n" " * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" "is installed on your hard drive and takes all the space available on it,\n" "you have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.There you are. Installation is now complete " "and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.Any partitions that have been newly defined " "must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "¯í¸û Ò¾¢Â Á¡ýʧÃì Ä¢ÉìŠ þÂì¸ ¿¢Ãø ¿¢ÚÅôÀθ¢ÈÐ..\n" "¿£í¸û §¾÷× ¦ºöÐûÇ ¦À¡¾¢¸Ç¢ý ±ñ½¢ì¨¸¨Â ´ðÊÔõ\n" "¯í¸û ¸½¢½¢Â¢ý §Å¸ò¨¾ ´ðÊÔõ º¢Ä ¿¢Á¢¼í¸Ç¢ø þÕóÐ\n" "¿£ñ¼ §¿Ãò¨¾ ±ÎòÐì ¦¸¡ûÇÄ¡õ .\n" "\n" "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ.." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now proposed to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" "¯í¸û Á¡ýʧÃì Ä¢ÉìŠ þÂì¸ ¿¢Ãø ¦ÅǢ£ðÊüÌõ \n" "þý¨È ¾¢Éò¾¢üÌõ þ¨¼Â¢ø ¿¢¨È Ҿ¢Â ¦À¡¾¢¸û ¦ÅÇ¢ÅóÐ\n" "þÕì¸Ä¡õ. þ¨Å ¯í¸û ¸½¢½¢Â¢ø ¿¢ÚÅôÀðÎûÇ ¦À¡¾¢¸Ç¢ý\n" "À¡Ð¸¡ôÒ Ì¨ÈÀ¡Î¸¨ÇÔõ, À¢¨Æ¸¨ÇÔõ ¿£ì¸ þ¨Å §¾¨ÅôÀ¼Ä¡õ\n" "þ¨Å þ¨½Âò¾¢ø ¾Ã× þÈì¸õ ¦ºö §ÅñÎõ. þô§À¡Ð þ¨½Âòмý \n" "þ¨½ôÒ þÕó¾¡ø ¿£í¸û þÅü¨È þÈ츢 ¿¢ÚÅÄ¡õ. ¿£í¸û ¦¾¡¨Ä§Àº¢\n" "ÓÄõ þ¨½ó¾¢Õó¾¡ø þ¾üÌ ¿£ñ¼ §¿Ãõ ¬¸Ä¡õ\n" "¦À¡¾¢¸¨Ç ¿¢ÚÅ \"¬õ\" ±É×õ, ¿¢ÚŠŢÕôÀõ þø¨Ä¦ÂýÈ¡ø \"þø¨Ä\" \n" "±É×õ §¾÷× ¦ºöÂ×õ.\n" "\n" "¦À¡¾¢¸¨Ç ¿¢ÚÅ \"¬õ\" ±É §¾÷× ¦ºö¾¡ø ¯í¸ÙìÌ ÀÄ þ¨½Â¾Çí¸Ç¢ý\n" "Ó¸Åâ ¸¡ð¼ôÀÎõ. ¯í¸ÙìÌ «Õ¸¢ø ¯ûÇ ¾Çò¾¢Ä¢ÕóÐ þÈì¸ «¾¨É\n" "§¾÷× ¦ºöÂ×õ. À¢ý \"¿¢Ú×\" ±ýÈ¡ø ¦À¡¾¢¸û ¿¢ÚÅôÀÎõ. þø¨Ä¦ÂýÈ¡ø\n" "\"¿£ìÌ\" ±Éî ¦º¡øÄ¢ ¦ÅÇ¢§ÂÈ×õ" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Before continuing, you should read carefully " "the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.At this point, it is time to choose the " "security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option" #: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy.\n" "Useful for later partition-table recovery if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you\n" "can try to recover it using this option. Please be careful and remember\n" "that it can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your\n" "initial partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.At this point, you need to choose which " "partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy.\n" "Useful for later partition-table recovery if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you\n" "can try to recover it using this option. Please be careful and remember\n" "that it can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your\n" "initial partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.More than one Microsoft partition has been " "detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ..þó¾ ¿¼ÅÊ쨸 º¢Ä ¿¢Á¢Êí¸û ¬Ìõ" #: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" " * \"Install\": completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps the\n" "current partitions of your hard drives as well as user configurations. All\n" "other configuration steps remain available with respect to plain\n" "installation;\n" "\n" " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configurations\n" "unchanged. Adding new packages to the current installation is also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly-customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" "choose this unless you know what you are doing." msgstr "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" " * \"Install\": completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps the\n" "current partitions of your hard drives as well as user configurations. All\n" "other configuration steps remain available with respect to plain\n" "installation;\n" "\n" " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configurations\n" "unchanged. Adding new packages to the current installation is also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly-customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" "choose this unless you know what you are doing.¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä." #: ../../help.pm_.c:584 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you won't even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards." msgstr "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you won't even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä." #: ../../help.pm_.c:597 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue." msgstr "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.¯¾Å¢ þýÉÓõ ¦Á¡Æ¢" "¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. " #: ../../help.pm_.c:610 msgid "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again." msgstr "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä." #: ../../help.pm_.c:624 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä.Please select the correct port. For example, " "the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux.. " #: ../../help.pm_.c:628 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. This is the most crucial decision point for " "the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." #: ../../help.pm_.c:664 msgid "" "LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose - in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. .ILO and grub are GNU/Linux bootloaders. This " "stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose - in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." #: ../../help.pm_.c:713 msgid "" "LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. LILO (the LInux LOader) and grub are " "bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" #: ../../help.pm_.c:724 msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. You must indicate where you wish to place the " "information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." #: ../../help.pm_.c:731 msgid "" "Here, we select a printing system for your computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Here, we select a printing system for your " "computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." #: ../../help.pm_.c:759 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from Microsoft Windows (if you used this hardware with\n" "Windows on your system)." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. DrakX now detects any IDE device present in " "your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from Microsoft Windows (if you used this hardware with\n" "Windows on your system)." #: ../../help.pm_.c:786 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. You can add additional entries for yaboot, " "either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." #: ../../help.pm_.c:833 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Yaboot is a bootloader for NewWorld MacIntosh " "hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." #: ../../help.pm_.c:865 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated with it." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Here are presented various parameters " "concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated with it." #: ../../help.pm_.c:894 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Choose the hard drive you want to erase in " "order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" #: ../../help.pm_.c:899 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "¯¾Å¢ þýÉÓõ ¦Á¡Æ¢¦ÀÂ÷¸ôÀ¼Å¢ø¨Ä. Click on \"OK\" if you want to delete all " "data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "¯í¸û ¸ÕÅ¢üÌ þ¨½Â¡É ÜÚ¸¨Ç ¸¡½ÓÊÂÅ¢ø¨Ä (%s §¸¡ô¨À ¸¡ÉÅ¢ø¨Ä), þ¾üÌ «÷ò¾õ ¿£í¸û " "¾ÅÈ¡É ¿¢Ú׾𨼠ÀÂýÀÎòи¢È£÷¸û (¾ÂצºöÐ Ò¾¢Â ¿¢Ú׾𨼠¯ÕÅ¡ìÌí¸û)" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "¿£í¸û %s þ¾¨ÉÔõ ÅÊ×ð¼ §ÅñÎõ" #: ../../install_any.pm_.c:418 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "¿£í¸û ¸£ú¸¡Ûõ ÀâÁ¡üÚ ¿¢Ãø¸¨Ç §¾Ã× ¦ºöÐ ¯ûÇ£÷¸û: %s\n" "\n" "\n" "þó¾ ÀâÁ¡È¢¸û ¦¸¡¼¡¿¢¨Ä¡¸ ÐÅì¸ôÀÎõ. þÅüÈ¢ø þ¨Å: \n" "¦ÅǢ¢¼ô Àð¼§À¡Ð À¡Ð¸¡ôÒ À¢Ã¨É ²ÐÁ¢ø¨Ä. ¬É¡ø À¢ýÉ¡Ç¢ø:\n" "¸ñÎÀ¢Êì¸ôÀ¼Ä¡õ.\n" "«ô§À¡Ð «ÅüÚì¸¡É Á¡üÚô ¦À¡¾¢¸¨Ç ¿¢ÚÅ×õ\n" "\n" "\n" "¿¢í¸û ¿¢îºÂõ þÅü¨È ¿¢ÚŠŢÕõÒ¸¢È£÷¸Ç¡?\n" #: ../../install_any.pm_.c:453 msgid "Can't use broadcast with no NIS domain" msgstr "NIS ¸Çò¾¢ø ÀÃôÀ ÓÊ¡Ð" #: ../../install_any.pm_.c:841 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "FAT §¸¡ôÀ¨ÁôÀ¢ø ÅÊçð¼ôÀð¼ ¦¿¸¢ú¾ð¨¼ %s ¢ý ¯û§Ç §À¡¼×õ" #: ../../install_any.pm_.c:845 msgid "This floppy is not FAT formatted" msgstr "FAT §¸¡ôÀ¨ÁôÀ¢ø ÅÊçð¼ôÀð¼Å¢ø¨Ä" #: ../../install_any.pm_.c:857 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "¿£í¸û ¾ü§À¡Ð ¿¢ÚŢ ¦À¡¾¢ò §¾÷׸ټý §ÅÚ ¸½¢½¢¸Ç¢ø ¿¢ÚÅ, ¿¢ÚÅø ¦¾¡¼íÌõ §À¡Ð " "``linux defcfg=floppy'' ±É ¯ûǣΠ¦ºöÂ×õ" #: ../../install_any.pm_.c:880 ../../partition_table.pm_.c:771 #, c-format msgid "Error reading file %s" msgstr "%s ±ýÈ §¸¡ô¨À ÀÊôÀ¾¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "¯í¸û ¸½¢½¢Â¢ø ¯ûÇ º¢Ä Åý¦À¡Õð¸Ç¢ý þÂì¸ ¿¢Ã¨Ä\n" "¿£í¸û %s þí¸¢ÕóÐ ±Îì¸Ä¡õ" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "¯í¸Ç¢¼õ ¿¢îºÂõ ´Õ ãÄ Å¸¢÷ þÕì¸ §ÅñÎõ" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "¯í¸Ç¢¼õ ¿¢îºÂõ ´Õ þ¼Á¡üÚ Å¸¢÷ þÕì¸ §ÅñÎõ" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "¯í¸Ç¢¼õ þ¼Á¡üÚ Å¸¢÷ þø¨Ä.\n" "\n" "«ôÀʧ ¦¾¡¼ÃÄ¡Á¡?" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:168 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "FAT ÅÊçð¼ôÀð¼ Ÿ¢÷ /boot/efi ±ýÈ þ¼ò¾¢ø ²üÈôÀ¼ §ÅñÎõ" #: ../../install_interactive.pm_.c:91 msgid "Use free space" msgstr "¸¡Ä¢Â¡¸ ¯ûÇ þ¼ò¨¾ ÀÂýÀÎòÐ" #: ../../install_interactive.pm_.c:93 msgid "Not enough free space to allocate new partitions" msgstr "§À¡ÐÁ¡É ¸¡Ä¢Â¢¼õ þø¨Ä" #: ../../install_interactive.pm_.c:101 msgid "Use existing partitions" msgstr "þÕìÌõ Ÿ¢÷¸¨Ç ÀÂýÀÎòÐí¸û" #: ../../install_interactive.pm_.c:103 msgid "There is no existing partition to use" msgstr "ÀÂýÀÎò¾ Ÿ¢÷¸¨Ç ²ÐÁ¢ø¨Ä" #: ../../install_interactive.pm_.c:110 msgid "Use the Windows partition for loopback" msgstr "" #: ../../install_interactive.pm_.c:113 msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: ../../install_interactive.pm_.c:115 msgid "Choose the sizes" msgstr "«Ç¨Å §¾÷×î ¦ºöÂ×õ" #: ../../install_interactive.pm_.c:116 msgid "Root partition size in MB: " msgstr "¦Á¸¡ ¨ÀðÊø ãÄ Å¸¢÷ «Ç× : " #: ../../install_interactive.pm_.c:117 msgid "Swap partition size in MB: " msgstr "¦Á¸¡ ¨ÀðÊø þ¼Á¡üÚ Å¸¢÷ «Ç× : " #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "Å¢ý§¼¡Š Ÿ¢üÈ¢ø ¯ûÇ ¸¡Ä¢Â¢¼ò¨¾ ÀÂýÀÎòÐ" #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "¿£í¸û ±ó¾ Ÿ¢üÈ¢ý «Ç¨Å Á¡üȢ¨Áì¸ §À¡¸¢È£÷¸û?" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "Å¢ý§¼¡Š Ÿ¢üÈ¢ý «Ç× Á¡üȢ¨Áì¸ôÀθ¢ÈÐ" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Å¢ý§¼¡Š Ÿ¢üÈ¢ý «Ç× Á¡üȢ¨Áì¸ôÀ¾¢ø , \n" "þó¾ À¢¨Æ §¿÷óÐûÇÐ ÁýÉ¢ì¸×õ %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Å¢ý§¼¡Š Ÿ¢÷ Á¢¸×õ Ðñ¼¡ì¸ôÀðÎûÇÐ. ¾ÂצºöÐ ¿£í¸û ¸½¢½¢¨Â Å¢ý§¼¡…¢ø ¦¾¡¼í¸¢ " "``defrag'' ±ýÈ ¸ÕÅ¢¨Â þÂì¸×õ. À¢ýÉ÷ Á£ñÎõ þíÌ ÅóÐ Á¡ýʧÃì ¿¢ÚŨÄò ¦¾¡¼Ã×õ" #: ../../install_interactive.pm_.c:138 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "±îºÃ¢ì¨¸!\n" "\n" "ʧÃìX þô§À¡Ð Å¢ý§¼¡Š Ÿ¢üÈ¢ý «Ç¨Å Á¡üȢ¨Áì¸ô §À¡¸¢ÈÐ:\n" "þÐ Á¢¸×õ ¬Àò¾¡ÉÐ. ¿£í¸û ¿¢îºÂõ Å¢ý§¼¡…¢ø scandisk ¿¢Ã¨Ä \n" "þÂ츢¢Õì¸ §ÅñÎõ \n" "§ÁÖõ ¯í¸ÙìÌ §¾¨ÅÂ¡É ¾¸Åø¸¨Ç ¸¡ôÒ ±ÎòÐì ¦¸¡ûÇ×õ\n" "þ¨Å¨ÉòÐõ ºÃ¢Â¡¸ þÕó¾¡ø ºÃ¢ ±É §¾÷×î ¦ºöÂ×õ" #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "Å¢ý§¼¡… «Ç× ±ùÅÇ× ¦À⾡¸ þÕì¸ §ÅñÎõ þó¾ " #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "Ÿ¢üÈ¢ø %s" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT «Ç× Á¡üȢ¨Áì¸ôΞ¢ø À¢¨Æ §¿÷óÐûÇÐ: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "«Ç¨Å Á¡üÚžüÌ «øÄÐ ¸ñ½¢Â¡ì¸ FAT Ÿ¢÷ ²ÐÁ¢ø¨Ä, " #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "ÓØ Åð¨¼Ôõ «Æ¢òРŢÎ" #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "Å¢ý§¼¡¨… ¿£ì¸¢ Å¢Î" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "¯í¸Ç¢¼õ ´ýÚìÌ §ÁüôÀð¼ Åý ÅðÎ ¯ûÇÐ, ±¾¢ø Ä¢É쨅 ¿¢ÚÅ §ÅñÎõ?" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr " %s ÅðÊø ¯ûÇ «¨ÉòРŸ¢Õõ «¾¢ø ¯ûÇ «¨ÉòÐ ¾¸Åø¸Ùõ «Æ¢ì¸ôÀðÎÅ¢Îõ" #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "Ÿ¢÷¾¨Ä ¾É¢ôÀÂÉ¡ìÌ" #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "fdisk-³ ÀÂýÀÎòÐ" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "þô§À¡Ð ¿£í¸û þó¾ %s Å𨼠Ÿ¢÷¾ø §ÅñÎõ.\n" "ÓÊó¾×¼ý , `w' ±ýƾý ãÄõ §ºÁ¢ôÀ¨¾ ÁÈóРŢ¼¡§¾" #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "Å¢ý§¼¡Š Ÿ¢üÈ¢ø §À¡¾¢Â þ¼Á¢ø¨Ä" #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "¿¢ÚמüÌ Å¸¢üÈ¢ø §À¡¾¢Â þ¼Á¢ø¨Ä" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "ʧÃìX Á¡Â¡Å¢ ¯í¸ÙìÌ þó¾ À¾¢ø¸¨Ç ¦¸¡Î츢ÈÐ" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "Ÿ¢÷¾Ä¢ø À¢¨Æ §¿÷óÐûÇÐ: %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "ŨĨÁôÀ¡ì¸í¸û ²üÈôÀθ¢ÈÐ" #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "ŨĨÁôÀ¡ì¸í¸û Ó¼ì¸ôÀθ¢ÈÐ" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "À¢¨Æ §¿÷óÐûÇÐ ÁýÉ¢ì¸×õ ±ÉìÌ ±ýÉ ¦ºöŦ¾ýÚ ¦¾Ã¢ÂÅ¢ø¨Ä\n" "¦¾¡¼÷óÐ ¦ºøÅÐ ¯í¸û ¦À¡ÚôÒ" #: ../../install_steps.pm_.c:210 #, c-format msgid "Duplicate mount point %s" msgstr "²üÈô ÒûÇ¢ %s ²ü¸É§Å ¯ûÇÐ" #: ../../install_steps.pm_.c:379 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "º¢Ä Ó츢 ¦À¡¾¢¸û ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ\n" "¯í¸û º¢Ê «øÄÐ º¢Ê þÂ츢 Àؾ¨¼óÐ þÕì¸Ä¡õ.\n" "¯í¸û º¢Ê¨Âî §º¡¾¢ì¸ ²ü¸É§Å þÂí̸¢ýÈ ¸½¢½¢Â¢ø \"rpm -qpl Mandrake/RPMS/*.rpm " "±É ¸ð¼¨Ç¢¼×õ\"\n" #: ../../install_steps.pm_.c:451 #, c-format msgid "Welcome to %s" msgstr "%s ìÌ ¿øÅÃ× " #: ../../install_steps.pm_.c:530 ../../install_steps.pm_.c:770 msgid "No floppy drive available" msgstr "¦¿¸¢ú Åð¼¸õ ²Ðõ þø¨Ä" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "¾ü§À¡Ð þó¾ `%s ¿¢¨ÄìÌ ¦ºø¸¢§È¡õ' \n" #: ../../install_steps_gtk.pm_.c:150 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "¯í¸û ¸½¢½¢Â¢ø ÅÇí¸û ̨ÈÅ¡¸ ¯ûǾ¡ø\n" "Á¡ñʧÃì Ä¢ÉìŠ ¿¢Úמ¢ø À¢¨Æ ²üÀ¼Ä¡õ. ¿£í¸û ¯¨ÃÅÆ¢ ¿¢ÚÅÄ¡õ,\n" "º¢Ê¢ø ¿¢ÚÅ ¦¾¡¼íÌõ §À¡Ð `F1' ±É «Øò¾¢ Å¢ðÎ, `text'. ±É «Êì¸×õ" #: ../../install_steps_gtk.pm_.c:161 ../../install_steps_interactive.pm_.c:231 msgid "Install Class" msgstr "¿¢Ú×¾ø Ũ¸" #: ../../install_steps_gtk.pm_.c:164 msgid "Please choose one of the following classes of installation:" msgstr "¾ÂצºöÐ ²§¾Ûõ ´Õ ¿¢Ú×¾ø Ũ¸¨Â §¾÷×î ¦ºö¸ " #: ../../install_steps_gtk.pm_.c:243 ../../install_steps_interactive.pm_.c:694 msgid "Package Group Selection" msgstr "¦À¡¾¢¸û ÌØò §¾÷×" #: ../../install_steps_gtk.pm_.c:276 ../../install_steps_interactive.pm_.c:709 msgid "Individual package selection" msgstr "¾É¢òÉ¢ ¦À¡¾¢Â¡¸ §¾÷×î ¦ºö" #: ../../install_steps_gtk.pm_.c:299 ../../install_steps_interactive.pm_.c:633 #, c-format msgid "Total size: %d / %d MB" msgstr "¦Á¸¡ ¨ÀðÊø ¦Á¡ò¾ «Ç× %d / %d" #: ../../install_steps_gtk.pm_.c:341 msgid "Bad package" msgstr "¾ÅÈ¡É ¦À¡¾¢" #: ../../install_steps_gtk.pm_.c:342 #, c-format msgid "Name: %s\n" msgstr "¦ÀÂ÷: %s\n" #: ../../install_steps_gtk.pm_.c:343 #, c-format msgid "Version: %s\n" msgstr "¦ÅǢ£Î: %s\n" #: ../../install_steps_gtk.pm_.c:344 #, c-format msgid "Size: %d KB\n" msgstr "¸¢§Ä¡ ¨ÀðÊø «Ç× %d \n" #: ../../install_steps_gtk.pm_.c:345 #, c-format msgid "Importance: %s\n" msgstr "Ó츢ÂòÐ×õ: %s\n" #: ../../install_steps_gtk.pm_.c:367 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "þ¼Á¢ø¨Ä ±ýÀ¾¡ø ¿£í¸û þó¾ ¦À¡¾¢¨Âò §¾`÷×î ¦ºö ÓÊ¡Ð" #: ../../install_steps_gtk.pm_.c:372 msgid "The following packages are going to be installed" msgstr "¸¢ú¸¡Ûõ ¦À¡¾¢¸û ¿¢ÚמüÌ §¾÷×î ¦ºöÂôÀðÎûÇÐ" #: ../../install_steps_gtk.pm_.c:373 msgid "The following packages are going to be removed" msgstr "¸¢ú¸¡Ûõ ¦À¡¾¢¸û ¿£ì¸ôÀθ¢ÈÐ" #: ../../install_steps_gtk.pm_.c:385 msgid "You can't select/unselect this package" msgstr "¿£í¸û þó¾ ¦À¡¾¢¨Â §¾÷×/¿£ì¸ ÓÊ¡Ð" #: ../../install_steps_gtk.pm_.c:397 msgid "This is a mandatory package, it can't be unselected" msgstr "þÐ ¸ð¼¡Â ¦À¡¾¢. þ¾¨É ¿£ì¸ ÓÊ¡Ð" #: ../../install_steps_gtk.pm_.c:399 msgid "You can't unselect this package. It is already installed" msgstr "þó¾ ¦À¡¾¢¨Â.¿£ì¸ ÓÊ¡Ð. þÐ ²ü¸É§Å ¿¢ÚÅôÀð¼ûÇÐ" #: ../../install_steps_gtk.pm_.c:402 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "þó¾ ¦À¡¾¢ ¿¢ÚÅôÀ¼§ÅñÎõ.µôÒ¾ø ¾Ã×õ?.\n" "þ¨¾ ¿£ì¸ §ÅñÎÁ¡?" #: ../../install_steps_gtk.pm_.c:405 msgid "You can't unselect this package. It must be upgraded" msgstr "þó¾ ¦À¡¾¢¨Â.¿£ì¸ ÓÊ¡Ð. þÐ ¿¢¸ú¿¢¨ÄôÀÎò¾ §ÅñÊ ¦À¡¾¢" #: ../../install_steps_gtk.pm_.c:410 msgid "Show automatically selected packages" msgstr "¾¡É¡¸ §¾÷×î ¦ºöÂôÀðÎûÇ ¦À¡¾¢¸¨Çì ¸¡ðÎ" #: ../../install_steps_gtk.pm_.c:411 ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #: ../../standalone/drakbackup_.c:3600 msgid "Install" msgstr "¿¢Ú×" #: ../../install_steps_gtk.pm_.c:414 msgid "Load/Save on floppy" msgstr "¦¿¸¢úÅðÊø §ºÁ¢ì¸×õ" #: ../../install_steps_gtk.pm_.c:415 msgid "Updating package selection" msgstr "¦À¡¾¢¸û §¾÷¨Å ¿¢¸ú¿¢¨Äô ÀÎòÐ" #: ../../install_steps_gtk.pm_.c:420 msgid "Minimal install" msgstr "̨Èó¾À𺠿¢ÚÅø" #: ../../install_steps_gtk.pm_.c:435 ../../install_steps_interactive.pm_.c:538 msgid "Choose the packages you want to install" msgstr "¿¢ÚÅ §ÅñÊ ¦À¡¾¢¸¨Ç §¾÷×î ¦ºöÔí¸û " #: ../../install_steps_gtk.pm_.c:451 ../../install_steps_interactive.pm_.c:778 msgid "Installing" msgstr "¿¢ÚÅôÀθ¢ÈÐ" #: ../../install_steps_gtk.pm_.c:457 msgid "Estimating" msgstr "¸½ì¸¢¼ôÀθ¢ÈÐ" #: ../../install_steps_gtk.pm_.c:464 msgid "Time remaining " msgstr "§¾¨ÅôÀÎõ §¿Ãõ" #: ../../install_steps_gtk.pm_.c:476 msgid "Please wait, preparing installation..." msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ..¿¢Ú×¾ø ¦¾¡¼í¸ô§À¡¸¢ÈÐ" #: ../../install_steps_gtk.pm_.c:560 #, c-format msgid "%d packages" msgstr "%d ¦À¡¾¢¸û" #: ../../install_steps_gtk.pm_.c:565 #, c-format msgid "Installing package %s" msgstr "%s ¦À¡¾¢ ¿¢ÚÅôÀθ¢ÈÐ" #: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:802 #: ../../standalone/drakautoinst_.c:202 msgid "Accept" msgstr "´ôÒì ¦¸¡û¸¢§Èý" #: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:802 msgid "Refuse" msgstr "´ôÒ즸¡ûÇÅ¢ø¨Ä" #: ../../install_steps_gtk.pm_.c:603 ../../install_steps_interactive.pm_.c:803 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "º¢Ê¨Â Á¡üÈ×õ\n" "\n" "¾ÂצºöÐ \"%s\" ±É ¦ÀÂâ¼ôÀð¼ ¿¢ÚÅø º¢Ê¨Â º¢ÊáÁ¢ø ¨Åì¸×õ. ¨Åò¾×¼ý ºÃ¢ ±ýÈ " "¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºöÂ×õ\n" "þó¾ º¢Ê þø¨Ä¦ÂýÈ¡ø ¿£ìÌ ±ýÈ ¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºö¾¡ø þó¾ º¢Ê¢ĢÕóÐ ¿¢ÚÅø ¿¢ýÚÅ¢" "Îõ" #: ../../install_steps_gtk.pm_.c:617 ../../install_steps_gtk.pm_.c:621 #: ../../install_steps_interactive.pm_.c:815 #: ../../install_steps_interactive.pm_.c:819 msgid "Go on anyway?" msgstr "¦¾¡¼÷óÐ ¦ºøÄÄ¡Á¡?" #: ../../install_steps_gtk.pm_.c:617 ../../install_steps_interactive.pm_.c:815 msgid "There was an error ordering packages:" msgstr "¦À¡¾¢¸¨Ç «ÎìÌž¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../install_steps_gtk.pm_.c:621 ../../install_steps_interactive.pm_.c:819 msgid "There was an error installing packages:" msgstr "¦À¡¾¢¸¨Ç ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "±îºÃ¢ì¨¸\n" "\n" "À¢ýÅÕõ Å¢ÅÃí¸¨Ç ¸ÅÉÁ¡¸ ÀÊì¸×õ. þ¾¢ø ¯í¸ÙìÌ\n" "¯¼ýÀ¡Î þø¨Ä¦ÂýÈ¡ø «ÎòÐ ÅÕõ\n" "º¢Ê¨Â ¿¢ÚŠܼ¡Ð\n" "\n" "\n" "«ÎòÐ ÅÕõ º¢Ê¢ø º¢Ä ¿¢Ãø¸û GPL ¯Ã¢¨ÁôÀÊ þø¨Ä\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "À¢¨Æ §¿÷óÐûÇÐ ÁýÉ¢ì¸×õ" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "¿£í¸û ¿¢îºÂõ ¿¢Ú×¾¨Ä Å¢ðÎ ¦ÅÇ¢§ÂÈ Å¢ÕõÒ¸¢È£÷¸Ç¡?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "«ÛÁ¾¢ ´ôÀó¾õ" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "«ÛÁ¾¢ ´ôÀó¾õ -¨¾Ã¢ÂÁ¡¸ ´ôÒ즸¡ûÇÄ¡õIntroduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:191 msgid "Are you sure you refuse the licence?" msgstr "¿£í¸û ¿¢îºÂõ «ÛÁ¾¢ ´ôÀó¾ò¨¾ ´ôÒ즸¡ûÇÅ¢ø¨Ä¡?" #: ../../install_steps_interactive.pm_.c:211 #: ../../install_steps_interactive.pm_.c:1038 #: ../../standalone/keyboarddrake_.c:31 msgid "Keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../install_steps_interactive.pm_.c:212 msgid "Please choose your keyboard layout." msgstr "¾ÂצºöÐ ¯í¸û Å¢¨ºôÀĨ¸ þ¼ «¨Á¨Åò §¾÷× ¦ºö¸ " #: ../../install_steps_interactive.pm_.c:213 msgid "Here is the full list of keyboards available" msgstr "¯í¸û ÀÂýÀ¡ðÊüÌ ¯ûÇ Å¢¨ºôÀĨ¸¸û «¨ÉòÐõ þí§¸ ¦¸¡Îì¸ôÀðÎûÇÉ" #: ../../install_steps_interactive.pm_.c:231 msgid "Which installation class do you want?" msgstr "¿¢ÚÅø Ũ¸¨Âò §¾÷×î ¦ºö¸ " #: ../../install_steps_interactive.pm_.c:235 msgid "Install/Update" msgstr "¿¢Ú×Ðø/¿¢¸ú¿¢¨ÄôÀÎòоø" #: ../../install_steps_interactive.pm_.c:235 msgid "Is this an install or an update?" msgstr "þÐ ¿¢Ú׾ġ «øÄÐ ¿¢¸ú¿¢¨ÄôÀÎòоġ ?" #: ../../install_steps_interactive.pm_.c:244 msgid "Recommended" msgstr "þ¨¾ §¾÷ó¦¾ÎôÀÐ ¿øÄÐ" #: ../../install_steps_interactive.pm_.c:247 #: ../../install_steps_interactive.pm_.c:250 msgid "Expert" msgstr "«È¢»÷" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 msgid "Upgrade" msgstr "¿¢¸ú¿¢¨ÄôÀÎòоø" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 msgid "Upgrade packages only" msgstr "¦À¡¾¢¸¨Ç ÁðÎõ ¿¢¸ú¿¢¨ÄôÀÎòÐ" #: ../../install_steps_interactive.pm_.c:275 msgid "Please choose the type of your mouse." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û " #: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:59 msgid "Mouse Port" msgstr "±Ä¢ þ¨½ì¸ôÀðÎûÇ Ð¨È" #: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:60 msgid "Please choose on which serial port your mouse is connected to." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢ þ¨½ì¸ôÀðÎûÇ ¦¾¡¼÷¿¢¨Äò ШÈŨÂò §¾÷×î ¦ºöÔí¸û" #: ../../install_steps_interactive.pm_.c:290 msgid "Buttons emulation" msgstr "¦À¡ò¾¡ý §À¡ýÁ¢" #: ../../install_steps_interactive.pm_.c:292 msgid "Button 2 Emulation" msgstr "2-¦À¡ò¾¡ý §À¡ýÁ¢" #: ../../install_steps_interactive.pm_.c:293 msgid "Button 3 Emulation" msgstr "3-¦À¡ò¾¡ý §À¡ýÁ¢" #: ../../install_steps_interactive.pm_.c:314 msgid "Configuring PCMCIA cards..." msgstr "PCMCIA «ð¨¼¸û ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../install_steps_interactive.pm_.c:314 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring IDE" msgstr "IDE ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../install_steps_interactive.pm_.c:321 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:336 msgid "No partition available" msgstr "Ÿ¢÷ ²ÐÁ¢ø¨Ä" #: ../../install_steps_interactive.pm_.c:339 msgid "Scanning partitions to find mount points" msgstr "²üÈô ÒûÇ¢¸Ù측¸ Ÿ¢÷¸û §¾¼ôÀθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:347 msgid "Choose the mount points" msgstr "²üÈô ÒûÇ¢¸¨Ç §¾÷×î ¦ºö" #: ../../install_steps_interactive.pm_.c:366 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "¯í¸û Ÿ¢÷ «¨ÁôÒ ÌÆôÀÁ¡¸ ¯ûÇÐ.\n" "%s ±ýÈ À¢¨Æ §¿÷óÐûÇÐ\n" "\n" "¯í¸û Åý ÅðÊø ¯ûÇ «¨ÉòРŢÅÃí¸¨ÇÔõ þÆì¸ ºõÁ¾Á¡?\n" #: ../../install_steps_interactive.pm_.c:379 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "ʧÃìÅð¼¡ø ÌÆôÀÁ¡¸ ¯ûÇ ¯í¸û Ÿ¢÷ «¨Áô¨À ÀÊì¸ ÓÊÂÅ¢ø¨Ä.\n" "þ¾üÌ §Áø ¦¾¡¼÷ÅÐ ¯í¸û ¦À¡ÚôÒ!" #: ../../install_steps_interactive.pm_.c:396 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "ÐÅíÌ¿¢Ã¨Ä ¿¢ÚÅ þ¼Á¢ø¨Ä. ¿¢Ú×¾ø ¦¾¡¼Õõ. ¬É¡ø ¯í¸û Ä¢ÉìŠ þÂì¸ ¿¢Ã¨Ä ÐÅì¸ " "ʧÃìÅ𨼠ÀÂýÀÎòÐí¸û" #: ../../install_steps_interactive.pm_.c:405 msgid "No root partition found to perform an upgrade" msgstr "¿¢¸ú¿¢¨Äô ÀÎò¾ôÀ¼ ãÄ Å¸¢÷ ²Ðõ ¸¡½ôÀ¼Å¢ø¨Ä" #: ../../install_steps_interactive.pm_.c:406 msgid "Root Partition" msgstr "ãÄ Å¸¢÷" #: ../../install_steps_interactive.pm_.c:407 msgid "What is the root partition (/) of your system?" msgstr "¯í¸û ¸½¢½¢Â¢ø ãÄ Å¸¢÷ (/) ±íÌ ¯ûÇÐ?" #: ../../install_steps_interactive.pm_.c:421 msgid "You need to reboot for the partition table modifications to take place" msgstr "¿£í¸û ¦ºö¾ Á¡üÈí¸û ¦ºÂøÀ¼ ¯í¸û ¸½¢½¢¨Â ÁÚ¦¾¡¼ì¸õ ¦ºöÂ×õ" #: ../../install_steps_interactive.pm_.c:445 msgid "Choose the partitions you want to format" msgstr "±ó¾ Ÿ¢÷ ÅÊçð¼À¼ §ÅñΦÁÉ §¾÷× §ºöÔí¸û" #: ../../install_steps_interactive.pm_.c:446 msgid "Check bad blocks?" msgstr "¸ð¼í¸¨Ç §º¡¾¢ì¸ §ÅñÎÁ¡?" #: ../../install_steps_interactive.pm_.c:473 msgid "Formatting partitions" msgstr "Ÿ¢÷¸û ÅÊçð¼Àθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:475 #, c-format msgid "Creating and formatting file %s" msgstr "%s ±ýÈ §¸¡ôÒ ¯ÕÅ¡ì¸ôÀðÎ ÅÊçð¼Àθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:480 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "%s ±ýÈ §¸¡ôÀ¨ÁôÒ §º¡¾¢ì¸ô À¼Å¢ø¨Ä. ¾ÅÚ ²ÐÁ¢Õ¿¾¡ø «¨¾ ºÃ¢¦ºöÂÄ¡Á¡? " #: ../../install_steps_interactive.pm_.c:482 msgid "Not enough swap space to fulfill installation, please add some" msgstr "þ¼Á¡üÚìÌ §À¡ÐÁ¡É þ¼Á¢ø¨Ä, ¾ÂצºöÐ þýÛõ º¢È¢Ð §º÷ì¸×õ" #: ../../install_steps_interactive.pm_.c:489 msgid "Looking for available packages and rebuilding rpm database..." msgstr "þÕìÌõ ¦À¡¾¢¸û À¡÷¨Å¢¼ôÀðÎ rpm ¾Ã× Á£ò¦¾¡¼ì¸ô Àθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:490 msgid "Looking for available packages..." msgstr "þÕìÌõ ¦À¡¾¢¸û À¡÷¨Å¢¼ôÀθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:493 msgid "Looking at packages already installed..." msgstr "²ü¸É§Å ¿¢ÚÅôÀðÎûÇ ¦À¡¾¢¸û À¡÷¨Å¢¼ôÀθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:497 msgid "Finding packages to upgrade..." msgstr "§ÁõÀÎò¾ôÀ¼ §ÅñÊ ¦À¡¾¢¸û «È¢ÂôÀθ¢ýÈÉ" #: ../../install_steps_interactive.pm_.c:515 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" #: ../../install_steps_interactive.pm_.c:550 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../install_steps_interactive.pm_.c:553 #, fuzzy msgid "Load from floppy" msgstr "¦¿¸¢úÅ𨼠ÅÊçðÎí¸û " #: ../../install_steps_interactive.pm_.c:555 msgid "Loading from floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:555 #, fuzzy msgid "Package selection" msgstr "¦¾¡¼íÌò¾¢¨Ã §¾÷×" #: ../../install_steps_interactive.pm_.c:560 msgid "Insert a floppy containing package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:572 #, fuzzy msgid "Save on floppy" msgstr "¦¿¸¢úÅ𨼠ÅÊçðÎí¸û " #: ../../install_steps_interactive.pm_.c:646 msgid "Selected size is larger than available space" msgstr "" #: ../../install_steps_interactive.pm_.c:660 #, fuzzy msgid "Type of install" msgstr "¿¢ÚÅôÀ¼Å¢ø¨Ä" #: ../../install_steps_interactive.pm_.c:661 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm_.c:664 msgid "With X" msgstr "" #: ../../install_steps_interactive.pm_.c:666 msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm_.c:667 msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm_.c:752 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm_.c:757 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../install_steps_interactive.pm_.c:778 #, fuzzy msgid "Preparing installation" msgstr "ÐÅíÌ¿¢Ãø ¿¢ÚÅôÀθ¢ÈÐ" #: ../../install_steps_interactive.pm_.c:787 #, fuzzy, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "%s ¦À¡¾¢¸¨Ç ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../install_steps_interactive.pm_.c:833 #, fuzzy msgid "Post-install configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../install_steps_interactive.pm_.c:839 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:845 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:865 msgid "" "You now have the opportunity to download encryption software.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" #: ../../install_steps_interactive.pm_.c:904 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm_.c:919 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" #: ../../install_steps_interactive.pm_.c:924 msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_steps_interactive.pm_.c:933 msgid "Contacting the mirror to get the list of available packages..." msgstr "" #: ../../install_steps_interactive.pm_.c:960 msgid "Which is your timezone?" msgstr "¿£í¸û ±ó¾ ¸¡Ä Áñ¼Äò¨¾î §º÷ó¾Å÷?" #: ../../install_steps_interactive.pm_.c:965 msgid "Hardware clock set to GMT" msgstr "" #: ../../install_steps_interactive.pm_.c:966 msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../install_steps_interactive.pm_.c:973 #, fuzzy msgid "NTP Server" msgstr "§º¨Å¸õ" #: ../../install_steps_interactive.pm_.c:1007 #: ../../install_steps_interactive.pm_.c:1015 msgid "Remote CUPS server" msgstr "" #: ../../install_steps_interactive.pm_.c:1008 #, fuzzy msgid "No printer" msgstr "«îÍô¦À¡È¢" #: ../../install_steps_interactive.pm_.c:1025 #, fuzzy msgid "Do you have an ISA sound card?" msgstr "§ÁÖõ ¯ûÇÉÅ¡?" #: ../../install_steps_interactive.pm_.c:1027 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:1029 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm_.c:1034 ../../steps.pm_.c:27 msgid "Summary" msgstr "" #: ../../install_steps_interactive.pm_.c:1037 msgid "Mouse" msgstr "±Ä¢" #: ../../install_steps_interactive.pm_.c:1039 #, fuzzy msgid "Timezone" msgstr "§¿ÃÅÊŨÁô¡Ç÷" #: ../../install_steps_interactive.pm_.c:1040 ../../printerdrake.pm_.c:2728 #: ../../printerdrake.pm_.c:2814 msgid "Printer" msgstr "«îÍô¦À¡È¢" #: ../../install_steps_interactive.pm_.c:1042 msgid "ISDN card" msgstr "" #: ../../install_steps_interactive.pm_.c:1045 #: ../../install_steps_interactive.pm_.c:1047 #, fuzzy msgid "Sound card" msgstr "g´Ä¢À¾¢Å¸õ" #: ../../install_steps_interactive.pm_.c:1049 msgid "TV card" msgstr "" #: ../../install_steps_interactive.pm_.c:1089 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1118 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1090 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1127 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1091 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1135 #: ../../install_steps_interactive.pm_.c:1141 #, fuzzy msgid "Windows Domain" msgstr "º¡Çà «Äí¸¡Ãõ" #: ../../install_steps_interactive.pm_.c:1092 #: ../../install_steps_interactive.pm_.c:1114 msgid "Local files" msgstr "¯ûǨÁì §¸¡ôÒ¸û" #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1102 ../../steps.pm_.c:24 #, fuzzy msgid "Set root password" msgstr "¯í¸û ¸¼×¡ø¨Ä Á¡üÈ×õ" #: ../../install_steps_interactive.pm_.c:1103 #, fuzzy msgid "No password" msgstr "¸¼×¡ø" #: ../../install_steps_interactive.pm_.c:1108 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" #: ../../install_steps_interactive.pm_.c:1114 ../../network/modem.pm_.c:49 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172 #, fuzzy msgid "Authentication" msgstr "¬Å½Á¡ì¸ø" #: ../../install_steps_interactive.pm_.c:1122 msgid "Authentication LDAP" msgstr "" #: ../../install_steps_interactive.pm_.c:1123 msgid "LDAP Base dn" msgstr "" #: ../../install_steps_interactive.pm_.c:1124 #, fuzzy msgid "LDAP Server" msgstr "§º¨Å¸õ" #: ../../install_steps_interactive.pm_.c:1130 msgid "Authentication NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:1131 msgid "NIS Domain" msgstr "" #: ../../install_steps_interactive.pm_.c:1132 #, fuzzy msgid "NIS Server" msgstr "§º¨Å¸õ" #: ../../install_steps_interactive.pm_.c:1138 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm_.c:1140 msgid "Authentication Windows Domain" msgstr "" #: ../../install_steps_interactive.pm_.c:1142 msgid "Domain Admin User Name" msgstr "" #: ../../install_steps_interactive.pm_.c:1143 #, fuzzy msgid "Domain Admin Password" msgstr "¸¼×¡ø Á¡üÚ" #: ../../install_steps_interactive.pm_.c:1178 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../install_steps_interactive.pm_.c:1194 #, fuzzy msgid "First floppy drive" msgstr "¦¿¸¢úÅ𨼠ÅÊçðÎí¸û " #: ../../install_steps_interactive.pm_.c:1195 msgid "Second floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:1196 ../../printerdrake.pm_.c:2277 msgid "Skip" msgstr "" #: ../../install_steps_interactive.pm_.c:1201 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" #: ../../install_steps_interactive.pm_.c:1207 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../install_steps_interactive.pm_.c:1215 msgid "Sorry, no floppy drive available" msgstr "" #: ../../install_steps_interactive.pm_.c:1219 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:1223 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "¦¿¸¢úÅ𨼠ÅÊçðÎí¸û " #: ../../install_steps_interactive.pm_.c:1226 #, fuzzy msgid "Creating bootdisk..." msgstr "ÐÅí̾𨼠¯ÕÅ¡ìÌí¸û" #: ../../install_steps_interactive.pm_.c:1233 msgid "Preparing bootloader..." msgstr "" #: ../../install_steps_interactive.pm_.c:1244 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" #: ../../install_steps_interactive.pm_.c:1250 #, fuzzy msgid "Do you want to use aboot?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../install_steps_interactive.pm_.c:1253 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm_.c:1260 #, fuzzy msgid "Installing bootloader" msgstr "ÐÅíÌ¿¢Ã¨Ä ¿¢Ú×í¸û" #: ../../install_steps_interactive.pm_.c:1266 msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../install_steps_interactive.pm_.c:1274 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm_.c:1308 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:1312 msgid "Creating auto install floppy..." msgstr "" #: ../../install_steps_interactive.pm_.c:1323 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../install_steps_interactive.pm_.c:1334 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../install_steps_interactive.pm_.c:1347 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "" #: ../../install_steps_interactive.pm_.c:1352 msgid "Generate auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1354 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:1359 msgid "Automated" msgstr "" #: ../../install_steps_interactive.pm_.c:1359 msgid "Replay" msgstr "" #: ../../install_steps_interactive.pm_.c:1362 #, fuzzy msgid "Save packages selection" msgstr "¦¾¡¼íÌò¾¢¨Ã §¾÷×" #: ../../install_steps_newt.pm_.c:22 #, fuzzy, c-format msgid "Mandrake Linux Installation %s" msgstr "Á¡ñʧÃì ŠÀ¡É¢Â ¦Á¡Æ¢ ¯¾Å¢áø" #: ../../install_steps_newt.pm_.c:34 msgid "" " / between elements | selects | next screen " msgstr "" #: ../../interactive.pm_.c:87 #, fuzzy msgid "kdesu missing" msgstr "¿£ìÌ" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "" #: ../../interactive.pm_.c:152 #, fuzzy msgid "Choose a file" msgstr "¾¢¨Ã¸ò¨¾ §¾÷×î ¦ºö" #: ../../interactive.pm_.c:317 msgid "Advanced" msgstr "«Ä¡¾¢Â¡É ¸ðÎôÀ¡Î¸û" #: ../../interactive.pm_.c:318 #, fuzzy msgid "Basic" msgstr "Á¢ýÉïºø" #: ../../interactive/newt.pm_.c:174 ../../my_gtk.pm_.c:155 #: ../../printerdrake.pm_.c:1990 msgid "<- Previous" msgstr "" #: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176 #: ../../standalone/drakbackup_.c:3464 ../../standalone/drakbackup_.c:3491 #: ../../standalone/drakbackup_.c:3517 msgid "Next" msgstr "«ÎòÐ" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 #, fuzzy msgid "Bad choice, try again\n" msgstr "Á£ñÎõ ÓÂüº¢òÐ À¡÷ì¸×õ" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: ../../interactive/stdio.pm_.c:95 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "þ¨¾ ¾¢Èì¸ ÓÊÂÅ¢ø¨Ä%s: %s\n" #: ../../interactive/stdio.pm_.c:96 #, fuzzy msgid "Do you want to click on this button?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "" #: ../../keyboard.pm_.c:173 ../../keyboard.pm_.c:208 msgid "Czech (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:210 #, fuzzy msgid "German" msgstr "¦ƒ÷ÁÉ¢" #: ../../keyboard.pm_.c:175 msgid "Dvorak" msgstr "" #: ../../keyboard.pm_.c:176 ../../keyboard.pm_.c:218 #, fuzzy msgid "Spanish" msgstr "ŨÄÁ£ý" #: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:219 #, fuzzy msgid "Finnish" msgstr "ÓÊó¾Ð" #: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:220 #, fuzzy msgid "French" msgstr "À¢ÃïÍ" #: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:252 #, fuzzy msgid "Norwegian" msgstr "¿¡÷§Å" #: ../../keyboard.pm_.c:180 #, fuzzy msgid "Polish" msgstr "¦À¡Ä¢º¢Â ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:181 ../../keyboard.pm_.c:260 msgid "Russian" msgstr "" #: ../../keyboard.pm_.c:183 ../../keyboard.pm_.c:262 #, fuzzy msgid "Swedish" msgstr "ŨÄÁ£ý" #: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:278 #, fuzzy msgid "UK keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:279 #, fuzzy msgid "US keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../keyboard.pm_.c:187 msgid "Albanian" msgstr "" #: ../../keyboard.pm_.c:188 msgid "Armenian (old)" msgstr "" #: ../../keyboard.pm_.c:189 msgid "Armenian (typewriter)" msgstr "" #: ../../keyboard.pm_.c:190 msgid "Armenian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:195 msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm_.c:197 #, fuzzy msgid "Belgian" msgstr "¦Àøƒ¢Âõ" #: ../../keyboard.pm_.c:198 #, fuzzy msgid "Bengali" msgstr "¦ºÂøÀÎòÐ" #: ../../keyboard.pm_.c:199 msgid "Bulgarian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:200 msgid "Bulgarian (BDS)" msgstr "" #: ../../keyboard.pm_.c:201 msgid "Brazilian (ABNT-2)" msgstr "" #: ../../keyboard.pm_.c:204 #, fuzzy msgid "Bosnian" msgstr "ͧġ¦Åɢ ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:205 #, fuzzy msgid "Belarusian" msgstr "¿£Ä츼ø" #: ../../keyboard.pm_.c:206 msgid "Swiss (German layout)" msgstr "" #: ../../keyboard.pm_.c:207 msgid "Swiss (French layout)" msgstr "" #: ../../keyboard.pm_.c:209 msgid "Czech (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:211 msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm_.c:212 msgid "Devanagari" msgstr "" #: ../../keyboard.pm_.c:213 #, fuzzy msgid "Danish" msgstr "ÓÊó¾Ð" #: ../../keyboard.pm_.c:214 msgid "Dvorak (US)" msgstr "" #: ../../keyboard.pm_.c:215 msgid "Dvorak (Norwegian)" msgstr "" #: ../../keyboard.pm_.c:216 #, fuzzy msgid "Dvorak (Swedish)" msgstr "ÍÅ¢ÊÍ ±ôÀÊî ¦ºö¾ø" #: ../../keyboard.pm_.c:217 msgid "Estonian" msgstr "" #: ../../keyboard.pm_.c:221 msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../keyboard.pm_.c:222 msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../../keyboard.pm_.c:223 #, fuzzy msgid "Greek" msgstr "¸¢§Ãì¸õ" #: ../../keyboard.pm_.c:224 msgid "Gujarati" msgstr "" #: ../../keyboard.pm_.c:225 msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm_.c:226 #, fuzzy msgid "Hungarian" msgstr "«í§¸Ã¢Â ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:227 #, fuzzy msgid "Croatian" msgstr "̧ú¢Â ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:228 #, fuzzy msgid "Israeli" msgstr "¬Š¾¢§ÃĢ¡" #: ../../keyboard.pm_.c:229 msgid "Israeli (Phonetic)" msgstr "" #: ../../keyboard.pm_.c:230 msgid "Iranian" msgstr "" #: ../../keyboard.pm_.c:231 #, fuzzy msgid "Icelandic" msgstr "«Â÷Ä¡óÐ" #: ../../keyboard.pm_.c:232 #, fuzzy msgid "Italian" msgstr "þò¾¡Ä¢Â ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:233 msgid "Inuktitut" msgstr "" #: ../../keyboard.pm_.c:234 msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm_.c:237 #, fuzzy msgid "Korean keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../keyboard.pm_.c:238 msgid "Latin American" msgstr "" #: ../../keyboard.pm_.c:239 #, fuzzy msgid "Laotian" msgstr "Lavaps" #: ../../keyboard.pm_.c:240 msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm_.c:242 msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../keyboard.pm_.c:243 msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:244 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:245 #, fuzzy msgid "Latvian" msgstr "Lavaps" #: ../../keyboard.pm_.c:246 msgid "Macedonian" msgstr "" #: ../../keyboard.pm_.c:247 msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm_.c:248 msgid "Mongolian (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:249 msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm_.c:250 msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm_.c:251 msgid "Dutch" msgstr "" #: ../../keyboard.pm_.c:253 msgid "Polish (qwerty layout)" msgstr "" #: ../../keyboard.pm_.c:254 msgid "Polish (qwertz layout)" msgstr "" #: ../../keyboard.pm_.c:255 msgid "Portuguese" msgstr "" #: ../../keyboard.pm_.c:256 msgid "Canadian (Quebec)" msgstr "" #: ../../keyboard.pm_.c:258 msgid "Romanian (qwertz)" msgstr "" #: ../../keyboard.pm_.c:259 msgid "Romanian (qwerty)" msgstr "" #: ../../keyboard.pm_.c:261 msgid "Russian (Yawerty)" msgstr "" #: ../../keyboard.pm_.c:263 #, fuzzy msgid "Slovenian" msgstr "ͧġ¦Åɢ ±ôÀÊî ¦ºö¾ø " #: ../../keyboard.pm_.c:264 msgid "Slovakian (QWERTZ)" msgstr "" #: ../../keyboard.pm_.c:265 msgid "Slovakian (QWERTY)" msgstr "" #: ../../keyboard.pm_.c:267 msgid "Serbian (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:269 msgid "Tamil (Unicode)" msgstr "" #: ../../keyboard.pm_.c:270 msgid "Tamil (TSCII)" msgstr "" #: ../../keyboard.pm_.c:271 #, fuzzy msgid "Thai keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../keyboard.pm_.c:273 #, fuzzy msgid "Tajik keyboard" msgstr "Å¢¨ºôÀĨ¸" #: ../../keyboard.pm_.c:274 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../keyboard.pm_.c:275 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../keyboard.pm_.c:277 msgid "Ukrainian" msgstr "" #: ../../keyboard.pm_.c:280 msgid "US keyboard (international)" msgstr "" #: ../../keyboard.pm_.c:281 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:282 msgid "Yugoslavian (latin)" msgstr "" #: ../../keyboard.pm_.c:289 msgid "Right Alt key" msgstr "" #: ../../keyboard.pm_.c:290 msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:291 msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:292 msgid "CapsLock key" msgstr "" #: ../../keyboard.pm_.c:293 msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:294 msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:295 #, fuzzy msgid "\"Menu\" key" msgstr "ʧÃìÀðÊ" #: ../../keyboard.pm_.c:296 #, fuzzy msgid "Left \"Windows\" key" msgstr "WMº¡Çà §ÁÄ¡Ç÷" #: ../../keyboard.pm_.c:297 msgid "Right \"Windows\" key" msgstr "" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../lvm.pm_.c:98 msgid "Remove the logical volumes first\n" msgstr "" #: ../../modparm.pm_.c:50 #, fuzzy msgid "a number" msgstr "Bomber-Å¢¨Ç¡ðÎ" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modparm.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modparm.pm_.c:54 msgid "comma separated numbers" msgstr "" #: ../../modparm.pm_.c:54 #, fuzzy msgid "comma separated strings" msgstr "Ÿ¢÷¸¨Ç ÅÊçðÎí¸û" #: ../../modules.pm_.c:292 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../mouse.pm_.c:25 #, fuzzy msgid "Sun - Mouse" msgstr "±Ä¢" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../mouse.pm_.c:34 #, fuzzy msgid "GlidePoint" msgstr "§¸Ä¢Âý" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63 msgid "Kensington Thinking Mouse" msgstr "" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59 msgid "Genius NetMouse" msgstr "" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "" #: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68 msgid "1 button" msgstr "" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51 msgid "Generic 2 Button Mouse" msgstr "" #: ../../mouse.pm_.c:46 #, fuzzy msgid "Wheel" msgstr "±¾¢Ã¢Âø" #: ../../mouse.pm_.c:49 #, fuzzy msgid "serial" msgstr "Ó¨ÉÂõ" #: ../../mouse.pm_.c:52 msgid "Generic 3 Button Mouse" msgstr "" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse" msgstr "" #: ../../mouse.pm_.c:54 msgid "Logitech MouseMan" msgstr "" #: ../../mouse.pm_.c:55 #, fuzzy msgid "Mouse Systems" msgstr "±Ä¢ «¨ÁôÒì¸û" #: ../../mouse.pm_.c:57 msgid "Logitech CC Series" msgstr "" #: ../../mouse.pm_.c:58 msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../mouse.pm_.c:60 #, fuzzy msgid "MM Series" msgstr "ÐÅì¸î§º¨Å¸û" #: ../../mouse.pm_.c:61 msgid "MM HitTablet" msgstr "" #: ../../mouse.pm_.c:62 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../mouse.pm_.c:66 #, fuzzy msgid "busmouse" msgstr "±Ä¢" #: ../../mouse.pm_.c:69 msgid "2 buttons" msgstr "" #: ../../mouse.pm_.c:70 msgid "3 buttons" msgstr "" #: ../../mouse.pm_.c:73 #, fuzzy msgid "none" msgstr "ÓÊó¾Ð" #: ../../mouse.pm_.c:75 #, fuzzy msgid "No mouse" msgstr "±Ä¢" #: ../../mouse.pm_.c:445 #, fuzzy msgid "Please test the mouse" msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../mouse.pm_.c:446 msgid "To activate the mouse," msgstr "" #: ../../mouse.pm_.c:447 msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../my_gtk.pm_.c:156 msgid "Finish" msgstr "ÓÊó¾Ð" #: ../../my_gtk.pm_.c:156 ../../printerdrake.pm_.c:1992 #, fuzzy msgid "Next ->" msgstr "«ÎòÐ" #: ../../my_gtk.pm_.c:284 msgid "Is this correct?" msgstr "" #: ../../my_gtk.pm_.c:356 ../../services.pm_.c:222 #, fuzzy msgid "Info" msgstr "þýʧ¸¡¿£Äõ" #: ../../my_gtk.pm_.c:377 msgid "Expand Tree" msgstr "" #: ../../my_gtk.pm_.c:378 msgid "Collapse Tree" msgstr "" #: ../../my_gtk.pm_.c:379 msgid "Toggle between flat and group sorted" msgstr "" #: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "þ¨½Âò¨¾ ÀÂýÀÎò¾ ¦¾¡¼÷Ò ²üÀÎòÐ" #: ../../network/adsl.pm_.c:20 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "Alcatel speedtouch usb" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "ECI Hi-Focus" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use dhcp" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pppoe" msgstr "" #: ../../network/adsl.pm_.c:22 msgid "use pptp" msgstr "" #: ../../network/ethernet.pm_.c:37 #, fuzzy msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpcd" msgstr "¿£í¸û ±ó¾ þÂì¸ «¨ÁôÒì¸¡É Ñ¨Æ¨Å §º÷ì¸ §À¡¸¢È£÷¸û?" #: ../../network/ethernet.pm_.c:88 #, fuzzy msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "ŨĨÁôÒ «ð¨¼ ±Ð×õ ¸¡½ôÀ¼Å¢ø¨Ä. Á£ñÎõ Åý¦À¡Õû ÅÊŨÁôÒì ¸ÕÅ¢¨Â þÂì¸×õ" #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:247 #, fuzzy msgid "Choose the network interface" msgstr "ŨĨÁôÒ «ð¨¼" #: ../../network/ethernet.pm_.c:93 #, fuzzy msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "±ó¾ ŨĨÁôÒ «ð¨¼ ¯í¸û ŨĨÁôÀ¡ì¸òмý þ¨½óÐûÇÐ" #: ../../network/ethernet.pm_.c:178 msgid "no network card found" msgstr "" #: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:365 #, fuzzy msgid "Configuring network" msgstr "ŨĨÁôÀ¡ì¸í¸¨Ç ÅÊŨÁÔí¸û" #: ../../network/ethernet.pm_.c:203 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" #: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:370 #, fuzzy msgid "Host name" msgstr "¸½¢½¢Â¢ý¦ÀÂ÷: " #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:94 ../../network/netconnect.pm_.c:108 #: ../../network/netconnect.pm_.c:163 ../../network/netconnect.pm_.c:178 #: ../../network/netconnect.pm_.c:205 ../../network/netconnect.pm_.c:228 #: ../../network/netconnect.pm_.c:236 #, fuzzy msgid "Network Configuration Wizard" msgstr "ʧÃìÁ¡Â¡Å¢¸û" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "" #: ../../network/isdn.pm_.c:22 #, fuzzy msgid "What kind is your ISDN connection?" msgstr "¯í¸û ÊÅ¢ ±ó¾ ¦ºó¾Ã ŨçÂðÊý ¸£ú ÅÕ¸¢ÈÐ?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../network/isdn.pm_.c:54 #, fuzzy msgid "New configuration (isdn-light)" msgstr "ŨĨÁôÀ¡ì¸õ ÅÊŨÁôÒ (%d «ð¨¼¸û)" #: ../../network/isdn.pm_.c:54 #, fuzzy msgid "Old configuration (isdn4net)" msgstr "¸¡ý§º¡ø ÅÊŨÁôÒì ÜÚ" #: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188 #: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205 #: ../../network/isdn.pm_.c:215 #, fuzzy msgid "ISDN Configuration" msgstr "ŨĨÁôÀ¡ì¸ ÅÊŨÁôÒ" #: ../../network/isdn.pm_.c:170 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" #: ../../network/isdn.pm_.c:183 #, fuzzy msgid "Europe protocol" msgstr "¦¾¡¼íÌ Å¨ÃÓ¨È" #: ../../network/isdn.pm_.c:183 msgid "Europe protocol (EDSS1)" msgstr "" #: ../../network/isdn.pm_.c:185 msgid "Protocol for the rest of the world" msgstr "" #: ../../network/isdn.pm_.c:185 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: ../../network/isdn.pm_.c:189 #, fuzzy msgid "Which protocol do you want to use?" msgstr "¿£í¸û ±ó¾ þÂì¸ «¨ÁôÒì¸¡É Ñ¨Æ¨Å §º÷ì¸ §À¡¸¢È£÷¸û?" #: ../../network/isdn.pm_.c:199 #, fuzzy msgid "What kind of card do you have?" msgstr "±ùÅ¢¾ X ÅÊŨÁô¨À ¨ÅòÐ즸¡ûÇ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../network/isdn.pm_.c:200 msgid "I don't know" msgstr "" #: ../../network/isdn.pm_.c:200 #, fuzzy msgid "ISA / PCMCIA" msgstr "PCMCIA" #: ../../network/isdn.pm_.c:200 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:206 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" #: ../../network/isdn.pm_.c:210 #, fuzzy msgid "Abort" msgstr "«À¢§Å¡÷ð" #: ../../network/isdn.pm_.c:210 msgid "Continue" msgstr "¦¾¡¼÷¸" #: ../../network/isdn.pm_.c:216 #, fuzzy msgid "Which is your ISDN card?" msgstr "¿£í¸û ±ó¾ ¸¡Ä Áñ¼Äò¨¾î §º÷ó¾Å÷?" #: ../../network/isdn.pm_.c:235 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" #: ../../network/isdn.pm_.c:244 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../network/modem.pm_.c:39 #, fuzzy msgid "Please choose which serial port your modem is connected to." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../network/modem.pm_.c:44 #, fuzzy msgid "Dialup options" msgstr "Å¢ÕôÀò§¾÷× ¦¾Ã¢Å¢ì¸×õ" #: ../../network/modem.pm_.c:45 ../../standalone/drakconnect_.c:621 #, fuzzy msgid "Connection name" msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../network/modem.pm_.c:46 ../../standalone/drakconnect_.c:622 msgid "Phone number" msgstr "" #: ../../network/modem.pm_.c:47 ../../standalone/drakconnect_.c:623 msgid "Login ID" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 msgid "CHAP" msgstr "" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 #, fuzzy msgid "PAP" msgstr "¨¸Â¡û" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 #, fuzzy msgid "Script-based" msgstr "þ­¼«¨Á×ì¸ÕÅ¢" #: ../../network/modem.pm_.c:49 ../../standalone/drakconnect_.c:625 #, fuzzy msgid "Terminal-based" msgstr "Ó¨ÉÂõ" #: ../../network/modem.pm_.c:50 ../../standalone/drakconnect_.c:626 #, fuzzy msgid "Domain name" msgstr "¯ý¨Á¡Éô ¦ÀÂ÷" #: ../../network/modem.pm_.c:51 ../../standalone/drakconnect_.c:627 msgid "First DNS Server (optional)" msgstr "" #: ../../network/modem.pm_.c:52 ../../standalone/drakconnect_.c:628 #, fuzzy msgid "Second DNS Server (optional)" msgstr "Ä¢ô ÀâÁ¡È¢ ÅÊŨÁôÒ" #: ../../network/netconnect.pm_.c:33 #, fuzzy msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "þ­í§¸ ¯í¸û À½¢Â¡Ã «¨ÁôÒ¸¨Ç ÅÊŨÁì¸Ä¡õ" #: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36 #, fuzzy msgid "" "\n" "You can reconfigure your connection." msgstr "þ­í§¸ ¯í¸û À½¢Â¡Ã «¨ÁôÒ¸¨Ç ÅÊŨÁì¸Ä¡õ" #: ../../network/netconnect.pm_.c:33 msgid "You are currently connected to internet." msgstr "" #: ../../network/netconnect.pm_.c:36 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" #: ../../network/netconnect.pm_.c:36 msgid "You are not currently connected to Internet." msgstr "" #: ../../network/netconnect.pm_.c:40 #, fuzzy msgid "Connect" msgstr "þ¨½ì¸ôÀð¼ûÇÐ" #: ../../network/netconnect.pm_.c:42 #, fuzzy msgid "Disconnect" msgstr "þ¨½ôÀ¢Ä¢ÕóРŢÎÀÎ" #: ../../network/netconnect.pm_.c:44 #, fuzzy msgid "Configure the connection" msgstr "ŨĨÁôÀ¡ì¸í¸¨Ç ÅÊŨÁÔí¸û" #: ../../network/netconnect.pm_.c:49 #, fuzzy msgid "Internet connection & configuration" msgstr "þ¨½Âò¦¾¡¼÷Ò ÅÊŨÁì¸ôÀ¡Çý" #: ../../network/netconnect.pm_.c:99 #, c-format msgid "We are now going to configure the %s connection." msgstr "" #: ../../network/netconnect.pm_.c:108 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" #: ../../network/netconnect.pm_.c:137 ../../network/netconnect.pm_.c:255 #: ../../network/netconnect.pm_.c:275 ../../network/tools.pm_.c:63 #, fuzzy msgid "Network Configuration" msgstr "ŨĨÁôÀ¡ì¸ ÅÊŨÁôÒ" #: ../../network/netconnect.pm_.c:138 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../network/netconnect.pm_.c:164 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../network/netconnect.pm_.c:170 #, fuzzy msgid "Choose the profile to configure" msgstr "¦¸¡¼¡¿¢¨Ä ÀÂɨÃò §¾÷×î ¦ºöÂ×õ" #: ../../network/netconnect.pm_.c:171 #, fuzzy msgid "Use auto detection" msgstr "º¢É¢Ã¡Á¡ ¿£ðÊôÒ¸¨Ç ÀÂýÀÎò¾×õ" #: ../../network/netconnect.pm_.c:172 ../../printerdrake.pm_.c:2930 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277 #: ../../standalone/drakfloppy_.c:145 #, fuzzy msgid "Expert Mode" msgstr "¾É¢òÐÅÁ¢ì¸ ШÈ" #: ../../network/netconnect.pm_.c:178 ../../printerdrake.pm_.c:283 #, fuzzy msgid "Detecting devices..." msgstr "º¡¾Éí¸¨Ç ¸ñÎÀ¢Êò¾ø" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 #, fuzzy msgid "Normal modem connection" msgstr "¦¾¡¨ÄôÒÆí¸¢" #: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198 #, c-format msgid "detected on port %s" msgstr "" #: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199 #, fuzzy msgid "ISDN connection" msgstr "«ø…¡ ŨÃÅ¢Âø þ­¨½ôÀ¡ý" #: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199 #, fuzzy, c-format msgid "detected %s" msgstr " %s ±ýÈ Å¨Ä¨ÁôÒ «ð¨¼" #: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200 #, fuzzy msgid "ADSL connection" msgstr "«ø…¡ ŨÃÅ¢Âø þ­¨½ôÀ¡ý" #: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200 #, fuzzy, c-format msgid "detected on interface %s" msgstr "Å¨Ä þ¨¼Ó¸ôÒ¸û" #: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201 #, fuzzy msgid "Cable connection" msgstr "«ø…¡ ŨÃÅ¢Âø þ­¨½ôÀ¡ý" #: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201 #, fuzzy msgid "cable connection detected" msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÒ ¸¡½ôÀðÎûÇÐ" #: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202 #, fuzzy msgid "LAN connection" msgstr "«ø…¡ ŨÃÅ¢Âø þ­¨½ôÀ¡ý" #: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202 msgid "ethernet card(s) detected" msgstr "" #: ../../network/netconnect.pm_.c:205 #, fuzzy msgid "Choose the connection you want to configure" msgstr "¯í¸ÙìÌ Å¢ÕôÀÁ¡É ÀâÁ¡½í¸¨ÇÔõ, ¬Æí¸¨ÇÔõ §¾÷ó¦¾Îí¸û" #: ../../network/netconnect.pm_.c:229 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:230 #, fuzzy msgid "Internet connection" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢" #: ../../network/netconnect.pm_.c:236 #, fuzzy msgid "Do you want to start the connection at boot?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../network/netconnect.pm_.c:250 #, fuzzy msgid "Network configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../network/netconnect.pm_.c:251 msgid "The network needs to be restarted" msgstr "" #: ../../network/netconnect.pm_.c:255 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" #: ../../network/netconnect.pm_.c:265 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" #: ../../network/netconnect.pm_.c:269 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../network/netconnect.pm_.c:270 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/network.pm_.c:294 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network/network.pm_.c:299 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network/network.pm_.c:309 ../../network/network.pm_.c:310 #, fuzzy, c-format msgid "Configuring network device %s" msgstr "ŨĨÁôÀ¡ì¸í¸¨Ç ÅÊŨÁÔí¸û" #: ../../network/network.pm_.c:310 #, fuzzy, c-format msgid " (driver %s)" msgstr "X ÀâÁ¡È¢Â¢ý þÂìÌ ¿¢Ãø %s\n" #: ../../network/network.pm_.c:312 ../../standalone/drakconnect_.c:231 #: ../../standalone/drakconnect_.c:467 msgid "IP address" msgstr "" #: ../../network/network.pm_.c:313 ../../standalone/drakconnect_.c:468 msgid "Netmask" msgstr "" #: ../../network/network.pm_.c:314 msgid "(bootp/dhcp)" msgstr "" #: ../../network/network.pm_.c:314 #, fuzzy msgid "Automatic IP" msgstr "k«Û" #: ../../network/network.pm_.c:315 #, fuzzy msgid "Start at boot" msgstr "¦¾¡¼íÌõ§À¡§¾ ÐÅ츢ŢÎ" #: ../../network/network.pm_.c:336 ../../printerdrake.pm_.c:753 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../network/network.pm_.c:366 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../../network/network.pm_.c:371 #, fuzzy msgid "DNS server" msgstr "X-ÀâÁ¡È¢" #: ../../network/network.pm_.c:372 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../network/network.pm_.c:374 #, fuzzy msgid "Gateway device" msgstr "ѨÆš¢ø" #: ../../network/network.pm_.c:386 #, fuzzy msgid "Proxies configuration" msgstr "ÅÊŨÁôÒ" #: ../../network/network.pm_.c:387 #, fuzzy msgid "HTTP proxy" msgstr "À¢É¡Á¢" #: ../../network/network.pm_.c:388 #, fuzzy msgid "FTP proxy" msgstr "À¢É¡Á¢" #: ../../network/network.pm_.c:389 msgid "Track network card id (useful for laptops)" msgstr "" #: ../../network/network.pm_.c:392 msgid "Proxy should be http://..." msgstr "" #: ../../network/network.pm_.c:393 msgid "Proxy should be ftp://..." msgstr "" #: ../../network/tools.pm_.c:41 #, fuzzy msgid "Internet configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../network/tools.pm_.c:42 #, fuzzy msgid "Do you want to try to connect to the Internet now?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../network/tools.pm_.c:46 ../../standalone/drakconnect_.c:196 msgid "Testing your connection..." msgstr "" #: ../../network/tools.pm_.c:56 msgid "The system is now connected to Internet." msgstr "" #: ../../network/tools.pm_.c:57 msgid "For security reason, it will be disconnected now." msgstr "" #: ../../network/tools.pm_.c:58 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" #: ../../network/tools.pm_.c:82 #, fuzzy msgid "Connection Configuration" msgstr "þ¨½Âò¦¾¡¼÷Ò ÅÊŨÁì¸ôÀ¡Çý" #: ../../network/tools.pm_.c:83 msgid "Please fill or check the field below" msgstr "" #: ../../network/tools.pm_.c:85 ../../standalone/drakconnect_.c:607 #, fuzzy msgid "Card IRQ" msgstr "k«ð¨¼" #: ../../network/tools.pm_.c:86 ../../standalone/drakconnect_.c:608 msgid "Card mem (DMA)" msgstr "" #: ../../network/tools.pm_.c:87 ../../standalone/drakconnect_.c:609 #, fuzzy msgid "Card IO" msgstr "k«ð¨¼" #: ../../network/tools.pm_.c:88 ../../standalone/drakconnect_.c:610 msgid "Card IO_0" msgstr "" #: ../../network/tools.pm_.c:89 ../../standalone/drakconnect_.c:611 msgid "Card IO_1" msgstr "" #: ../../network/tools.pm_.c:90 ../../standalone/drakconnect_.c:612 msgid "Your personal phone number" msgstr "" #: ../../network/tools.pm_.c:91 ../../standalone/drakconnect_.c:613 msgid "Provider name (ex provider.net)" msgstr "" #: ../../network/tools.pm_.c:92 ../../standalone/drakconnect_.c:614 msgid "Provider phone number" msgstr "" #: ../../network/tools.pm_.c:93 ../../standalone/drakconnect_.c:615 msgid "Provider dns 1 (optional)" msgstr "" #: ../../network/tools.pm_.c:94 ../../standalone/drakconnect_.c:616 msgid "Provider dns 2 (optional)" msgstr "" #: ../../network/tools.pm_.c:95 #, fuzzy msgid "Choose your country" msgstr "¯í¸û Å¢¨ºôÀĨ¸ þ¼ «¨Á¨Å §¾÷×î ¦ºöÔí¸û" #: ../../network/tools.pm_.c:96 ../../standalone/drakconnect_.c:619 msgid "Dialing mode" msgstr "" #: ../../network/tools.pm_.c:97 ../../standalone/drakconnect_.c:631 #, fuzzy msgid "Connection speed" msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../network/tools.pm_.c:98 ../../standalone/drakconnect_.c:632 #, fuzzy msgid "Connection timeout (in sec)" msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:617 msgid "Account Login (user name)" msgstr "" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:618 #: ../../standalone/drakconnect_.c:649 #, fuzzy msgid "Account Password" msgstr "¸¼×¡ø" #: ../../network/tools.pm_.c:104 ../../network/tools.pm_.c:118 msgid "United Kingdom" msgstr "À¢Ã¢ð¼ý" #: ../../partition_table.pm_.c:606 #, fuzzy msgid "mount failed: " msgstr "ÀÂÉ÷ÌÈ¢ôÒ: " #: ../../partition_table.pm_.c:670 msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm_.c:688 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" #: ../../partition_table.pm_.c:778 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm_.c:780 msgid "Bad backup file" msgstr "" #: ../../partition_table.pm_.c:802 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../partition_table/raw.pm_.c:187 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "" #: ../../pkgs.pm_.c:29 #, fuzzy msgid "nice" msgstr "§Å¨Äì¸ÕÅ¢¸û" #: ../../pkgs.pm_.c:30 #, fuzzy msgid "maybe" msgstr "«ð¼Å¨½" #: ../../printer.pm_.c:26 msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../printer.pm_.c:27 msgid "LPRng - LPR New Generation" msgstr "" #: ../../printer.pm_.c:28 msgid "LPD - Line Printer Daemon" msgstr "" #: ../../printer.pm_.c:29 msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../printer.pm_.c:35 ../../printer.pm_.c:854 msgid "CUPS" msgstr "" #: ../../printer.pm_.c:36 msgid "LPRng" msgstr "" #: ../../printer.pm_.c:37 #, fuzzy msgid "LPD" msgstr "¨¸Â¡û" #: ../../printer.pm_.c:38 #, fuzzy msgid "PDQ" msgstr "¨¸Â¡û" #: ../../printer.pm_.c:50 #, fuzzy msgid "Local printer" msgstr "¯ûǨÁì §¸¡ôÒ¸û" #: ../../printer.pm_.c:51 #, fuzzy msgid "Remote printer" msgstr "ʧÃ즾¡¨ÄôÒÆí¸¢" #: ../../printer.pm_.c:52 msgid "Printer on remote CUPS server" msgstr "" #: ../../printer.pm_.c:53 ../../printerdrake.pm_.c:776 msgid "Printer on remote lpd server" msgstr "" #: ../../printer.pm_.c:54 #, fuzzy msgid "Network printer (TCP/Socket)" msgstr "ŨĨÁôÒì ¸½¢½¢(§ÅñÊ)" #: ../../printer.pm_.c:55 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../printer.pm_.c:56 msgid "Printer on NetWare server" msgstr "" #: ../../printer.pm_.c:57 ../../printerdrake.pm_.c:780 msgid "Enter a printer device URI" msgstr "" #: ../../printer.pm_.c:58 msgid "Pipe job into a command" msgstr "" #: ../../printer.pm_.c:487 ../../printer.pm_.c:678 ../../printer.pm_.c:1000 #: ../../printerdrake.pm_.c:2070 ../../printerdrake.pm_.c:3189 msgid "Unknown model" msgstr "" #: ../../printer.pm_.c:515 #, fuzzy msgid "Local Printers" msgstr "¯ûǨÁì §¸¡ôÒ¸û" #: ../../printer.pm_.c:517 ../../printer.pm_.c:855 #, fuzzy msgid "Remote Printers" msgstr "ʧÃ즾¡¨ÄôÒÆí¸¢" #: ../../printer.pm_.c:524 ../../printerdrake.pm_.c:301 #, c-format msgid " on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:527 ../../printerdrake.pm_.c:303 #, c-format msgid ", USB printer \\/*%s" msgstr "" #: ../../printer.pm_.c:532 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr "" #: ../../printer.pm_.c:535 msgid ", multi-function device on USB" msgstr "" #: ../../printer.pm_.c:537 msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer.pm_.c:539 msgid ", multi-function device" msgstr "" #: ../../printer.pm_.c:542 #, c-format msgid ", printing to %s" msgstr "" #: ../../printer.pm_.c:544 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:546 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer.pm_.c:550 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer.pm_.c:554 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer.pm_.c:556 #, fuzzy, c-format msgid ", using command %s" msgstr "penguin-Å¢¨Ç¡ðÎ" #: ../../printer.pm_.c:675 ../../printerdrake.pm_.c:1540 msgid "Raw printer (No driver)" msgstr "" #: ../../printer.pm_.c:824 #, fuzzy, c-format msgid "(on %s)" msgstr "(%s ÜÚ)" #: ../../printer.pm_.c:826 msgid "(on this machine)" msgstr "" #: ../../printer.pm_.c:851 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: ../../printer.pm_.c:857 ../../printerdrake.pm_.c:2851 #: ../../printerdrake.pm_.c:2862 ../../printerdrake.pm_.c:3078 #: ../../printerdrake.pm_.c:3130 ../../printerdrake.pm_.c:3156 #: ../../printerdrake.pm_.c:3326 ../../printerdrake.pm_.c:3328 #, fuzzy msgid " (Default)" msgstr "¦¸¡¼¡¿¢¨Ä" #: ../../printerdrake.pm_.c:25 msgid "Select Printer Connection" msgstr "" #: ../../printerdrake.pm_.c:26 msgid "How is the printer connected?" msgstr "" #: ../../printerdrake.pm_.c:28 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" #: ../../printerdrake.pm_.c:36 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:2914 #, fuzzy msgid "CUPS configuration" msgstr "ÅÊŨÁôÒ¸û" #: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:2915 msgid "Specify CUPS server" msgstr "" #: ../../printerdrake.pm_.c:86 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" #: ../../printerdrake.pm_.c:87 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" #: ../../printerdrake.pm_.c:91 msgid "The IP address should look like 192.168.1.20" msgstr "" #: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:987 msgid "The port number should be an integer!" msgstr "" #: ../../printerdrake.pm_.c:102 #, fuzzy msgid "CUPS server IP" msgstr "X-ÀâÁ¡È¢" #: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1007 #, fuzzy msgid "Port" msgstr "§Á¡ºÁ¡É" #: ../../printerdrake.pm_.c:105 #, fuzzy msgid "Automatic CUPS configuration" msgstr "¾¡É¢Âì¸ ÅÊŨÁôÒ" #: ../../printerdrake.pm_.c:183 ../../printerdrake.pm_.c:192 #: ../../printerdrake.pm_.c:2897 ../../printerdrake.pm_.c:3017 msgid "Add a new printer" msgstr "" #: ../../printerdrake.pm_.c:184 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printerdrake.pm_.c:193 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:202 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printerdrake.pm_.c:213 msgid "Auto-detect printers connected to this machine" msgstr "" #: ../../printerdrake.pm_.c:215 msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printerdrake.pm_.c:218 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printerdrake.pm_.c:245 ../../printerdrake.pm_.c:459 #: ../../printerdrake.pm_.c:484 #, fuzzy msgid "Local Printer" msgstr "«îÍô¦À¡È¢" #: ../../printerdrake.pm_.c:246 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printerdrake.pm_.c:283 ../../printerdrake.pm_.c:474 #: ../../printerdrake.pm_.c:683 ../../printerdrake.pm_.c:923 #, fuzzy msgid "Printer auto-detection" msgstr "Åý¾ðÎ ¸ñÎÀ¢Êò¾ø" #: ../../printerdrake.pm_.c:305 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:307 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:313 #, fuzzy, c-format msgid "Detected %s" msgstr " %s ±ýÈ Å¨Ä¨ÁôÒ «ð¨¼" #: ../../printerdrake.pm_.c:317 ../../printerdrake.pm_.c:348 #: ../../printerdrake.pm_.c:367 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:319 ../../printerdrake.pm_.c:350 #: ../../printerdrake.pm_.c:372 #, c-format msgid "USB printer \\/*%s" msgstr "" #: ../../printerdrake.pm_.c:321 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:323 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:460 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:464 msgid "You must enter a device or file name!" msgstr "" #: ../../printerdrake.pm_.c:475 msgid "No printer found!" msgstr "" #: ../../printerdrake.pm_.c:485 msgid "Available printers" msgstr "" #: ../../printerdrake.pm_.c:489 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:490 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:492 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printerdrake.pm_.c:493 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printerdrake.pm_.c:495 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printerdrake.pm_.c:496 #, fuzzy msgid "Please choose the port where your printer is connected to." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../printerdrake.pm_.c:498 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printerdrake.pm_.c:503 msgid "You must choose/enter a printer/device!" msgstr "" #: ../../printerdrake.pm_.c:523 #, fuzzy msgid "Manual configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../printerdrake.pm_.c:577 msgid "Remote lpd Printer Options" msgstr "" #: ../../printerdrake.pm_.c:578 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" #: ../../printerdrake.pm_.c:579 #, fuzzy msgid "Remote host name" msgstr "¦¾¡¨Ä «Ï¸ø" #: ../../printerdrake.pm_.c:580 #, fuzzy msgid "Remote printer name" msgstr "Å¢¨Ç¡ðÎ" #: ../../printerdrake.pm_.c:583 msgid "Remote host name missing!" msgstr "" #: ../../printerdrake.pm_.c:587 msgid "Remote printer name missing!" msgstr "" #: ../../printerdrake.pm_.c:609 ../../printerdrake.pm_.c:1119 #, c-format msgid "Detected model: %s %s" msgstr "" #: ../../printerdrake.pm_.c:683 ../../printerdrake.pm_.c:923 msgid "Scanning network..." msgstr "" #: ../../printerdrake.pm_.c:692 ../../printerdrake.pm_.c:713 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:695 ../../printerdrake.pm_.c:716 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:736 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printerdrake.pm_.c:737 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:738 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printerdrake.pm_.c:739 #, fuzzy msgid "SMB server host" msgstr "X-ÀâÁ¡È¢" #: ../../printerdrake.pm_.c:740 #, fuzzy msgid "SMB server IP" msgstr "X-ÀâÁ¡È¢" #: ../../printerdrake.pm_.c:741 #, fuzzy msgid "Share name" msgstr "k«§¾Å¢¨Ç¡ðÎ" #: ../../printerdrake.pm_.c:744 msgid "Workgroup" msgstr "" #: ../../printerdrake.pm_.c:746 #, fuzzy msgid "Auto-detected" msgstr "Å¢¨Ç¡ðÎ" #: ../../printerdrake.pm_.c:757 msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../printerdrake.pm_.c:761 msgid "Samba share name missing!" msgstr "" #: ../../printerdrake.pm_.c:767 msgid "SECURITY WARNING!" msgstr "" #: ../../printerdrake.pm_.c:768 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:778 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:781 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printerdrake.pm_.c:853 msgid "NetWare Printer Options" msgstr "" #: ../../printerdrake.pm_.c:854 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" #: ../../printerdrake.pm_.c:855 #, fuzzy msgid "Printer Server" msgstr "«îÍô¦À¡È¢" #: ../../printerdrake.pm_.c:856 msgid "Print Queue Name" msgstr "" #: ../../printerdrake.pm_.c:861 msgid "NCP server name missing!" msgstr "" #: ../../printerdrake.pm_.c:865 msgid "NCP queue name missing!" msgstr "" #: ../../printerdrake.pm_.c:932 ../../printerdrake.pm_.c:952 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:935 ../../printerdrake.pm_.c:955 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printerdrake.pm_.c:975 msgid "TCP/Socket Printer Options" msgstr "" #: ../../printerdrake.pm_.c:977 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" #: ../../printerdrake.pm_.c:978 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: ../../printerdrake.pm_.c:983 msgid "Printer host name or IP missing!" msgstr "" #: ../../printerdrake.pm_.c:1005 msgid "Printer host name or IP" msgstr "" #: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1056 msgid "Printer Device URI" msgstr "" #: ../../printerdrake.pm_.c:1055 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../printerdrake.pm_.c:1070 msgid "A valid URI must be entered!" msgstr "" #: ../../printerdrake.pm_.c:1402 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../printerdrake.pm_.c:1403 msgid "Name of printer" msgstr "" #: ../../printerdrake.pm_.c:1405 #, fuzzy msgid "Location" msgstr "k´Ç¢ò§¾¡üÈ þÂ츢" #: ../../printerdrake.pm_.c:1416 ../../printerdrake.pm_.c:1536 #, fuzzy msgid "Reading printer database..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:1419 #, fuzzy msgid "Preparing printer database..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:1516 msgid "Your printer model" msgstr "" #: ../../printerdrake.pm_.c:1517 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printerdrake.pm_.c:1522 ../../printerdrake.pm_.c:1525 msgid "The model is correct" msgstr "" #: ../../printerdrake.pm_.c:1523 ../../printerdrake.pm_.c:1524 #: ../../printerdrake.pm_.c:1527 msgid "Select model manually" msgstr "" #: ../../printerdrake.pm_.c:1543 #, fuzzy msgid "Printer model selection" msgstr "Өɠ§À¡ýÁ¢" #: ../../printerdrake.pm_.c:1544 #, fuzzy msgid "Which printer model do you have?" msgstr "±ùÅ¢¾ X ÅÊŨÁô¨À ¨ÅòÐ즸¡ûÇ Å¢ÕõÒ¸¢È£÷¸û?" #: ../../printerdrake.pm_.c:1545 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" #: ../../printerdrake.pm_.c:1548 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printerdrake.pm_.c:1624 #, fuzzy msgid "OKI winprinter configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../printerdrake.pm_.c:1625 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printerdrake.pm_.c:1668 ../../printerdrake.pm_.c:1695 #, fuzzy msgid "Lexmark inkjet configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../printerdrake.pm_.c:1669 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printerdrake.pm_.c:1696 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Go to the US site and click on the \"Drivers\" button. Then choose " "your model and afterwards \"Linux\" as operating system. The drivers come as " "RPM packages or shell scripts with interactive graphical installation. You " "do not need to do this configuration by the graphical frontends. Cancel " "directly after the license agreement. Then print printhead alignment pages " "with \"lexmarkmaintain\" and adjust the head alignment settings with this " "program." msgstr "" #: ../../printerdrake.pm_.c:1912 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../printerdrake.pm_.c:1921 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../printerdrake.pm_.c:1925 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../printerdrake.pm_.c:1930 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../printerdrake.pm_.c:1969 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../printerdrake.pm_.c:1986 #, fuzzy msgid "Test pages" msgstr "Шȸ¨Çî §º¡¾¢ò¾ø" #: ../../printerdrake.pm_.c:1987 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../printerdrake.pm_.c:1991 msgid "No test pages" msgstr "" #: ../../printerdrake.pm_.c:1992 #, fuzzy msgid "Print" msgstr "«îÍô¦À¡È¢" #: ../../printerdrake.pm_.c:1994 #, fuzzy msgid "Standard test page" msgstr "þÂøÀ¡É" #: ../../printerdrake.pm_.c:1997 msgid "Alternative test page (Letter)" msgstr "" #: ../../printerdrake.pm_.c:2000 msgid "Alternative test page (A4)" msgstr "" #: ../../printerdrake.pm_.c:2002 #, fuzzy msgid "Photo test page" msgstr "gš¢ø ¯ÕŨÁôÒ" #: ../../printerdrake.pm_.c:2006 msgid "Do not print any test page" msgstr "" #: ../../printerdrake.pm_.c:2014 ../../printerdrake.pm_.c:2166 #, fuzzy msgid "Printing test page(s)..." msgstr "«îÍ §ÁÄ¡Ç÷" #: ../../printerdrake.pm_.c:2039 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2043 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../printerdrake.pm_.c:2050 msgid "Did it work properly?" msgstr "" #: ../../printerdrake.pm_.c:2072 ../../printerdrake.pm_.c:3191 #, fuzzy msgid "Raw printer" msgstr "±Ø¾-ÀÊì¸" #: ../../printerdrake.pm_.c:2098 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printerdrake.pm_.c:2100 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2103 ../../printerdrake.pm_.c:2120 #: ../../printerdrake.pm_.c:2130 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printerdrake.pm_.c:2106 ../../printerdrake.pm_.c:2146 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2110 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printerdrake.pm_.c:2115 ../../printerdrake.pm_.c:2125 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printerdrake.pm_.c:2117 ../../printerdrake.pm_.c:2127 #: ../../printerdrake.pm_.c:2137 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printerdrake.pm_.c:2122 ../../printerdrake.pm_.c:2132 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../printerdrake.pm_.c:2135 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:2139 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printerdrake.pm_.c:2143 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printerdrake.pm_.c:2153 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2154 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2156 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2157 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: ../../printerdrake.pm_.c:2160 ../../printerdrake.pm_.c:2163 #: ../../printerdrake.pm_.c:2164 ../../printerdrake.pm_.c:2165 #: ../../printerdrake.pm_.c:3175 ../../standalone/drakTermServ_.c:248 #: ../../standalone/drakbackup_.c:1485 ../../standalone/drakbackup_.c:3530 #: ../../standalone/drakbug_.c:129 ../../standalone/drakfont_.c:705 #: ../../standalone/drakfont_.c:1014 msgid "Close" msgstr "ãÎ" #: ../../printerdrake.pm_.c:2163 #, fuzzy msgid "Print option list" msgstr "¿¢¸úò¾¡ý" #: ../../printerdrake.pm_.c:2182 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printerdrake.pm_.c:2202 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printerdrake.pm_.c:2223 ../../printerdrake.pm_.c:2673 #: ../../printerdrake.pm_.c:2945 #, fuzzy msgid "Reading printer data..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:2243 ../../printerdrake.pm_.c:2271 #: ../../printerdrake.pm_.c:2306 #, fuzzy msgid "Transfer printer configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../printerdrake.pm_.c:2244 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../printerdrake.pm_.c:2247 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../printerdrake.pm_.c:2249 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2251 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../printerdrake.pm_.c:2253 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2254 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../printerdrake.pm_.c:2255 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printerdrake.pm_.c:2258 #, fuzzy msgid "Do not transfer printers" msgstr "§¸¡ôÒô À¡¢Á¡üÈ §ÁÄ¡Ç÷" #: ../../printerdrake.pm_.c:2259 ../../printerdrake.pm_.c:2276 #, fuzzy msgid "Transfer" msgstr "ʧÃìÅ¢ýÁ¡üÈ¢" #: ../../printerdrake.pm_.c:2272 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../printerdrake.pm_.c:2280 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../printerdrake.pm_.c:2285 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../printerdrake.pm_.c:2293 #, fuzzy msgid "New printer name" msgstr "ŨĨÁôÒ «ð¨¼" #: ../../printerdrake.pm_.c:2296 #, c-format msgid "Transferring %s..." msgstr "" #: ../../printerdrake.pm_.c:2307 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printerdrake.pm_.c:2316 #, fuzzy msgid "Refreshing printer data..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:2324 ../../printerdrake.pm_.c:2395 #: ../../printerdrake.pm_.c:2407 #, fuzzy msgid "Configuration of a remote printer" msgstr "«ïºø¸ÕŢ¢ý ÅÊŨÁôÒ" #: ../../printerdrake.pm_.c:2325 msgid "Starting network..." msgstr "" #: ../../printerdrake.pm_.c:2359 ../../printerdrake.pm_.c:2363 #: ../../printerdrake.pm_.c:2365 #, fuzzy msgid "Configure the network now" msgstr "ŨĨÁôÀ¡ì¸í¸¨Ç ÅÊŨÁÔí¸û" #: ../../printerdrake.pm_.c:2360 #, fuzzy msgid "Network functionality not configured" msgstr "ŨĨÁôÒ «ð¨¼ ²ü¸É§Å ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð" #: ../../printerdrake.pm_.c:2361 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printerdrake.pm_.c:2364 msgid "Go on without configuring the network" msgstr "" #: ../../printerdrake.pm_.c:2397 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printerdrake.pm_.c:2398 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printerdrake.pm_.c:2408 #, fuzzy msgid "Restarting printing system..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:2446 #, fuzzy msgid "high" msgstr "¯Â÷Å¡É" #: ../../printerdrake.pm_.c:2446 #, fuzzy msgid "paranoid" msgstr "ºó§¾¸ô §Àö" #: ../../printerdrake.pm_.c:2447 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../printerdrake.pm_.c:2448 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printerdrake.pm_.c:2480 msgid "Starting the printing system at boot time" msgstr "" #: ../../printerdrake.pm_.c:2481 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printerdrake.pm_.c:2504 ../../printerdrake.pm_.c:2544 #: ../../printerdrake.pm_.c:2581 ../../printerdrake.pm_.c:2621 #: ../../printerdrake.pm_.c:2733 msgid "Checking installed software..." msgstr "" #: ../../printerdrake.pm_.c:2548 msgid "Removing LPRng..." msgstr "" #: ../../printerdrake.pm_.c:2585 msgid "Removing LPD..." msgstr "" #: ../../printerdrake.pm_.c:2657 msgid "Select Printer Spooler" msgstr "" #: ../../printerdrake.pm_.c:2658 #, fuzzy msgid "Which printing system (spooler) do you want to use?" msgstr "¿£í¸û ±ó¾ þÂì¸ «¨ÁôÒì¸¡É Ñ¨Æ¨Å §º÷ì¸ §À¡¸¢È£÷¸û?" #: ../../printerdrake.pm_.c:2691 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../printerdrake.pm_.c:2704 msgid "Installing Foomatic..." msgstr "" #: ../../printerdrake.pm_.c:2769 ../../printerdrake.pm_.c:2808 #: ../../printerdrake.pm_.c:3192 ../../printerdrake.pm_.c:3262 #, fuzzy msgid "Printer options" msgstr "¿¢¸úò¾¡ý" #: ../../printerdrake.pm_.c:2778 #, fuzzy msgid "Preparing PrinterDrake..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:2795 ../../printerdrake.pm_.c:3349 #, fuzzy msgid "Configuring applications..." msgstr "ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../printerdrake.pm_.c:2815 msgid "Would you like to configure printing?" msgstr "" #: ../../printerdrake.pm_.c:2827 #, fuzzy msgid "Printing system: " msgstr "«îÍ §ÁÄ¡Ç÷" #: ../../printerdrake.pm_.c:2875 #, fuzzy msgid "Printerdrake" msgstr "«îÍô¦À¡È¢" #: ../../printerdrake.pm_.c:2879 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org." msgstr "" #: ../../printerdrake.pm_.c:2880 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" #: ../../printerdrake.pm_.c:2906 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printerdrake.pm_.c:2924 msgid "Change the printing system" msgstr "" #: ../../printerdrake.pm_.c:2929 ../../standalone/drakconnect_.c:277 msgid "Normal Mode" msgstr "" #: ../../printerdrake.pm_.c:3085 ../../printerdrake.pm_.c:3135 #: ../../printerdrake.pm_.c:3343 #, fuzzy msgid "Do you want to configure another printer?" msgstr "¯í¸û ÅÊŨÁô¨À §º¡¾¢òÐ À¡÷ì¸ §ÅñÎÁ¡? [§º¡¾¢òÐ À¡÷ôÀÐ Ó츢Âõ]" #: ../../printerdrake.pm_.c:3170 #, fuzzy msgid "Modify printer configuration" msgstr "ÅÊŨÁôÒ §º¡¾¢òÐ À¡÷ì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:3172 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../printerdrake.pm_.c:3176 msgid "Do it!" msgstr "¦ºö¸" #: ../../printerdrake.pm_.c:3181 ../../printerdrake.pm_.c:3236 #, fuzzy msgid "Printer connection type" msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../printerdrake.pm_.c:3182 ../../printerdrake.pm_.c:3240 msgid "Printer name, description, location" msgstr "" #: ../../printerdrake.pm_.c:3184 ../../printerdrake.pm_.c:3255 msgid "Printer manufacturer, model, driver" msgstr "" #: ../../printerdrake.pm_.c:3185 ../../printerdrake.pm_.c:3256 msgid "Printer manufacturer, model" msgstr "" #: ../../printerdrake.pm_.c:3194 ../../printerdrake.pm_.c:3266 msgid "Set this printer as the default" msgstr "" #: ../../printerdrake.pm_.c:3196 ../../printerdrake.pm_.c:3271 msgid "Add this printer to Star Office/OpenOffice.org" msgstr "" #: ../../printerdrake.pm_.c:3197 ../../printerdrake.pm_.c:3280 msgid "Remove this printer from Star Office/OpenOffice.org" msgstr "" #: ../../printerdrake.pm_.c:3198 ../../printerdrake.pm_.c:3289 #, fuzzy msgid "Print test pages" msgstr "þ¨½Âò¾Çõ ¯ÕÅìÌí¸û" #: ../../printerdrake.pm_.c:3199 ../../printerdrake.pm_.c:3291 msgid "Know how to use this printer" msgstr "" #: ../../printerdrake.pm_.c:3201 ../../printerdrake.pm_.c:3293 #, fuzzy msgid "Remove printer" msgstr "ѨÆÅ¢¼ò¨¾ ¿£ìÌ" #: ../../printerdrake.pm_.c:3245 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../printerdrake.pm_.c:3269 #, fuzzy msgid "Default printer" msgstr "¦¸¡¼¡¿¢¨Ä" #: ../../printerdrake.pm_.c:3270 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printerdrake.pm_.c:3274 ../../printerdrake.pm_.c:3277 msgid "Adding printer to Star Office/OpenOffice.org" msgstr "" #: ../../printerdrake.pm_.c:3275 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org." msgstr "" #: ../../printerdrake.pm_.c:3278 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org." msgstr "" #: ../../printerdrake.pm_.c:3283 ../../printerdrake.pm_.c:3286 msgid "Removing printer from Star Office/OpenOffice.org" msgstr "" #: ../../printerdrake.pm_.c:3284 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org." msgstr "" #: ../../printerdrake.pm_.c:3287 #, c-format msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org." msgstr "" #: ../../printerdrake.pm_.c:3295 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../printerdrake.pm_.c:3297 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58 #: ../../proxy.pm_.c:78 #, fuzzy msgid "Proxy configuration" msgstr "ÅÊŨÁôÒ" #: ../../proxy.pm_.c:30 msgid "" "Welcome to the proxy configuration utility.\n" "\n" "Here, you'll be able to set up your http and ftp proxies\n" "with or without login and password\n" msgstr "" #: ../../proxy.pm_.c:38 msgid "" "Please fill in the http proxy informations\n" "Leave it blank if you don't want an http proxy" msgstr "" #: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60 #, fuzzy msgid "URL" msgstr "UML" #: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61 #, fuzzy msgid "port" msgstr "«È¢ì¨¸" #: ../../proxy.pm_.c:44 msgid "Url should begin with 'http:'" msgstr "" #: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69 msgid "The port part should be numeric" msgstr "" #: ../../proxy.pm_.c:59 msgid "" "Please fill in the ftp proxy informations\n" "Leave it blank if you don't want an ftp proxy" msgstr "" #: ../../proxy.pm_.c:65 msgid "Url should begin with 'ftp:' or 'http:'" msgstr "" #: ../../proxy.pm_.c:79 msgid "" "Please enter proxy login and password, if any.\n" "Leave it blank if you don't want login/passwd" msgstr "" #: ../../proxy.pm_.c:80 #, fuzzy msgid "login" msgstr "§¸þ­Äì¸Ó¨È ŨÃ× " #: ../../proxy.pm_.c:82 #, fuzzy msgid "password" msgstr "¸¼×¡ø" #: ../../proxy.pm_.c:84 #, fuzzy msgid "re-type password" msgstr "¯í¸û ¸¼×¡ø¨Ä Á¡üÈ×õ" #: ../../proxy.pm_.c:88 #, fuzzy msgid "The passwords don't match. Try again!" msgstr "¸¼×¡ü¸û þÃñÎõ ´ýÈ¡¸ þø¨Ä" #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../raid.pm_.c:108 #, c-format msgid "Can't write file %s" msgstr "" #: ../../raid.pm_.c:137 #, fuzzy msgid "mkraid failed" msgstr "§¸¡ôÒ¸¨Çì ¸ñÎÀ¢Ê " #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../services.pm_.c:14 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:26 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../services.pm_.c:28 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../services.pm_.c:29 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:33 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../services.pm_.c:35 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:38 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../services.pm_.c:40 msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../services.pm_.c:41 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../services.pm_.c:43 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:45 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../services.pm_.c:47 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" #: ../../services.pm_.c:48 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:50 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm_.c:52 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:55 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:57 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../services.pm_.c:59 msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm_.c:60 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:63 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:66 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" #: ../../services.pm_.c:67 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:69 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" #: ../../services.pm_.c:71 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:74 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:76 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:78 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:80 msgid "Launch the sound system on your machine" msgstr "" #: ../../services.pm_.c:81 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:83 msgid "Load the drivers for your usb devices." msgstr "" #: ../../services.pm_.c:84 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../services.pm_.c:110 ../../services.pm_.c:152 msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../services.pm_.c:122 msgid "Printing" msgstr "«îÍ §ÁÄ¡Ç÷" #: ../../services.pm_.c:123 msgid "Internet" msgstr "­¨½Âõ" #: ../../services.pm_.c:126 #, fuzzy msgid "File sharing" msgstr "À¸¢÷§ÅÐõ þø¨Ä" #: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1669 msgid "System" msgstr "¸½¢½¢ «¨ÁôÒ" #: ../../services.pm_.c:133 #, fuzzy msgid "Remote Administration" msgstr "ʧÃ즾¡¨ÄôÒÆí¸¢" #: ../../services.pm_.c:141 #, fuzzy msgid "Database Server" msgstr "¾Ã×ò¾Çí¸û" #: ../../services.pm_.c:170 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../services.pm_.c:186 msgid "Services" msgstr "ÐÅì¸î§º¨Å¸û" #: ../../services.pm_.c:198 #, fuzzy msgid "running" msgstr "±îºÃ¢ì¨¸" #: ../../services.pm_.c:198 #, fuzzy msgid "stopped" msgstr "À¢ý§º÷" #: ../../services.pm_.c:212 msgid "Services and deamons" msgstr "" #: ../../services.pm_.c:217 msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../services.pm_.c:224 msgid "On boot" msgstr "" #: ../../services.pm_.c:236 #, fuzzy msgid "Start" msgstr "¿¢¨Ä" #: ../../services.pm_.c:236 msgid "Stop" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 8.2" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "" #: ../../share/advertising/00-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/01-gnu.pl_.c:9 msgid "Join the Free Software world" msgstr "" #: ../../share/advertising/01-gnu.pl_.c:10 msgid "" "Get to know the Open Source community and become a member. Learn, teach, and " "help others by joining the many discussion forums that you will find in our " "\"Community\" webpages" msgstr "" #: ../../share/advertising/02-internet.pl_.c:9 #, fuzzy msgid "Internet and Messaging" msgstr "®à¾ý" #: ../../share/advertising/02-internet.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides the best software to access everything the " "Internet has to offer: Surf the web & view animations with Mozilla and " "Konqueror, exchange email & organize your personal information with " "Evolution and Kmail, and much more" msgstr "" #: ../../share/advertising/03-graphic.pl_.c:9 #, fuzzy msgid "Multimedia and Graphics" msgstr "Àø漸õ-ŨÃÅ¢Âø" #: ../../share/advertising/03-graphic.pl_.c:10 msgid "" "Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use " "the latest software to play music and audio files, edit and organize your " "images and photos, watch TV and videos, and much more" msgstr "" #: ../../share/advertising/04-develop.pl_.c:9 msgid "Development" msgstr "¯ÕÅ¡ì¸õ" #: ../../share/advertising/04-develop.pl_.c:10 msgid "" "Mandrake Linux 8.2 is the ultimate development platform. Discover the power " "of the GNU gcc compiler as well as the best Open Source development " "environments" msgstr "" #: ../../share/advertising/05-contcenter.pl_.c:9 #: ../../standalone/drakbug_.c:69 msgid "Mandrake Control Center" msgstr "Á¡ñʧÃì ¸ðÎôÀðÎ ¨ÁÂõ" #: ../../share/advertising/05-contcenter.pl_.c:10 msgid "" "The Mandrake Linux 8.2 Control Center is a one-stop location for fully " "customizing and configuring your Mandrake system" msgstr "" #: ../../share/advertising/06-user.pl_.c:9 #, fuzzy msgid "User interfaces" msgstr "Å¨Ä þ¨¼Ó¸ôÒ¸û" #: ../../share/advertising/06-user.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides 11 different graphical desktop environments and " "window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker " "0.8, and the rest" msgstr "" #: ../../share/advertising/07-server.pl_.c:9 msgid "Server Software" msgstr "" #: ../../share/advertising/07-server.pl_.c:10 msgid "" "Transform your machine into a powerful server with just a few clicks of the " "mouse: Web server, email, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/08-games.pl_.c:9 msgid "Games" msgstr "Å¢¨Ç¡ðÎì¸û" #: ../../share/advertising/08-games.pl_.c:10 msgid "" "Mandrake Linux 8.2 provides the best Open Source games - arcade, action, " "cards, sports, strategy, ..." msgstr "" #: ../../share/advertising/09-MDKcampus.pl_.c:9 #, fuzzy msgid "MandrakeCampus" msgstr "ʧÃìÀðÊ" #: ../../share/advertising/09-MDKcampus.pl_.c:10 msgid "" "Would you like to learn Linux simply, quickly, and for free? MandrakeSoft " "provides free Linux training, as well as a way to test your progress, at " "MandrakeCampus -- our online training center" msgstr "" #: ../../share/advertising/10-MDKexpert.pl_.c:9 #, fuzzy msgid "MandrakeExpert" msgstr "Á¡ñʧÃìþ¨½Â" #: ../../share/advertising/10-MDKexpert.pl_.c:10 msgid "" "Quality support from the Linux Community, and from MandrakeSoft, is just " "around the corner. And if you're already a Linux veteran, become an \"Expert" "\" and share your knowledge at our support website" msgstr "" #: ../../share/advertising/11-consul.pl_.c:9 #, fuzzy msgid "MandrakeConsulting" msgstr "Á¡ñʧÃìþ¨½Â" #: ../../share/advertising/11-consul.pl_.c:10 msgid "" "For all of your IT projects, our consultants are ready to analyze your " "requirements and offer a customized solution. Benefit from MandrakeSoft's " "vast experience as a Linux producer to provide a true IT alternative for " "your business organization" msgstr "" #: ../../share/advertising/12-MDKstore.pl_.c:9 #, fuzzy msgid "MandrakeStore" msgstr "Á¡ñʧÃìþ¨½Â" #: ../../share/advertising/12-MDKstore.pl_.c:10 msgid "" "A full range of Linux solutions, as well as special offers on products and " "'goodies', are available online at our e-store" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:9 msgid "" "For more information on MandrakeSoft's Professional Services and commercial " "offerings, please see the following web page:" msgstr "" #: ../../share/advertising/13-Nvert.pl_.c:11 msgid "http://www.mandrakesoft.com/sales/contact" msgstr "" #: ../../standalone.pm_.c:40 #, fuzzy msgid "Installing packages..." msgstr "%s ¦À¡¾¢¸¨Ç ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../standalone/XFdrake_.c:143 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../standalone/XFdrake_.c:147 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../../standalone/diskdrake_.c:81 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../../standalone/drakTermServ_.c:188 #, fuzzy msgid "Mandrake Terminal Server Configuration" msgstr "Ä¢ô ÀâÁ¡È¢ ÅÊŨÁôÒ" #: ../../standalone/drakTermServ_.c:203 #, fuzzy msgid "Enable Server" msgstr "ÀâÁ¡È¢¸¨Ç ¦ºÂøÀÎòÐ" #: ../../standalone/drakTermServ_.c:210 #, fuzzy msgid "Disable Server" msgstr "ÀâÁ¡È¢¸û Ó¼Á¡ì¸ôÀθ¢ýÈÉ..." #: ../../standalone/drakTermServ_.c:218 #, fuzzy msgid "Start Server" msgstr "Freeciv Å¢¨Ç¡¼×õ" #: ../../standalone/drakTermServ_.c:225 #, fuzzy msgid "Stop Server" msgstr "´Ä¢ô ÀâÁ¡È¢" #: ../../standalone/drakTermServ_.c:233 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:235 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:239 #, fuzzy msgid "Add/Del Users" msgstr "ÀÂɨÃî §º÷" #: ../../standalone/drakTermServ_.c:241 #, fuzzy msgid "Add/Del Clients" msgstr "DHCP §ÅñÊ" #: ../../standalone/drakTermServ_.c:246 ../../standalone/drakbackup_.c:3282 #: ../../standalone/drakbackup_.c:3315 ../../standalone/drakbackup_.c:3341 #: ../../standalone/drakbackup_.c:3368 ../../standalone/drakbackup_.c:3395 #: ../../standalone/drakbackup_.c:3434 ../../standalone/drakbackup_.c:3455 #: ../../standalone/drakbackup_.c:3482 ../../standalone/drakbackup_.c:3508 #: ../../standalone/drakbackup_.c:3533 ../../standalone/drakfont_.c:700 msgid "Help" msgstr "¯¾Å¢" #: ../../standalone/drakTermServ_.c:436 #, fuzzy msgid "Boot Floppy" msgstr "gþ¨½Âò¦¾¡¼÷Ò «¨ÆôÀ¡ý" #: ../../standalone/drakTermServ_.c:438 msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ_.c:507 msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ_.c:509 ../../standalone/drakTermServ_.c:539 msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ_.c:521 msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ_.c:524 msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ_.c:535 #, fuzzy msgid "No nic selected!" msgstr "þ¨½ì¸ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakTermServ_.c:538 msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ_.c:552 #, fuzzy msgid "<-- Delete" msgstr "¿£ìÌ" #: ../../standalone/drakTermServ_.c:559 msgid "Delete All NBIs" msgstr "" #: ../../standalone/drakTermServ_.c:621 #, fuzzy msgid "Add User -->" msgstr "ÀÂɨÃî §º÷" #: ../../standalone/drakTermServ_.c:629 msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ_.c:703 msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ_.c:735 #, fuzzy msgid "<-- Del Client" msgstr "DHCP §ÅñÊ" #: ../../standalone/drakTermServ_.c:741 #, fuzzy msgid "dhcpd Config..." msgstr "ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../standalone/drakTermServ_.c:888 #, fuzzy msgid "Write Config" msgstr "ÅÊŨÁôÒ" #: ../../standalone/drakTermServ_.c:946 msgid "Please insert floppy disk:" msgstr "" #: ../../standalone/drakTermServ_.c:950 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:952 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:955 msgid "No floppy drive available!" msgstr "" #: ../../standalone/drakTermServ_.c:964 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ_.c:966 msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ_.c:985 msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakautoinst_.c:43 #, fuzzy msgid "Error!" msgstr "À¢¨Æ" #: ../../standalone/drakautoinst_.c:44 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../standalone/drakautoinst_.c:46 #, fuzzy msgid "Auto Install Configurator" msgstr "k¸Õ ÅÊŨÁôÀ¡Ç÷" #: ../../standalone/drakautoinst_.c:47 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../standalone/drakautoinst_.c:69 #, fuzzy msgid "Automatic Steps Configuration" msgstr "¾¡É¢Âì¸ ÅÊŨÁôÒ" #: ../../standalone/drakautoinst_.c:70 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/drakautoinst_.c:81 ../../standalone/drakautoinst_.c:82 msgid "Creating auto install floppy" msgstr "" #: ../../standalone/drakautoinst_.c:144 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:548 #: ../../standalone/scannerdrake_.c:105 #, fuzzy msgid "Congratulations!" msgstr "ÅÊŨÁôÒ¸û" #: ../../standalone/drakautoinst_.c:240 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakautoinst_.c:278 msgid "Auto Install" msgstr "¾¡¿¢ÚÅø" #: ../../standalone/drakautoinst_.c:348 #, fuzzy msgid "Add an item" msgstr "ÀÂɨÃî §ºÕí¸û- þÐ Ó츢Âõ" #: ../../standalone/drakautoinst_.c:355 msgid "Remove the last item" msgstr "" #: ../../standalone/drakbackup_.c:625 msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakbackup_.c:731 msgid "WARNING" msgstr "" #: ../../standalone/drakbackup_.c:732 #, fuzzy msgid "FATAL" msgstr "FAT §¸¡ôÀ¨ÁôÒ" #: ../../standalone/drakbackup_.c:744 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:745 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:749 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:770 ../../standalone/drakbackup_.c:840 #: ../../standalone/drakbackup_.c:894 msgid "Total progess" msgstr "" #: ../../standalone/drakbackup_.c:822 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup_.c:831 msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup_.c:838 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup_.c:865 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup_.c:908 msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup_.c:912 msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup_.c:934 msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup_.c:938 msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup_.c:942 msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup_.c:981 msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup_.c:1045 msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup_.c:1144 ../../standalone/drakbackup_.c:1193 msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup_.c:1194 ../../standalone/drakbackup_.c:1261 msgid "Hard Disk Backup files..." msgstr "" #: ../../standalone/drakbackup_.c:1206 msgid "Backup User files..." msgstr "" #: ../../standalone/drakbackup_.c:1207 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:1260 msgid "Backup Other files..." msgstr "" #: ../../standalone/drakbackup_.c:1266 msgid "No changes to backup!" msgstr "" #: ../../standalone/drakbackup_.c:1282 ../../standalone/drakbackup_.c:1305 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1289 #, c-format msgid "" "file list sent by FTP : %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:1292 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1310 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1315 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1324 msgid " Error during mail sending. \n" msgstr "" #: ../../standalone/drakbackup_.c:1346 msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup_.c:1459 ../../standalone/drakbackup_.c:1470 #: ../../standalone/drakbackup_.c:1481 ../../standalone/drakfont_.c:1004 #, fuzzy msgid "File Selection" msgstr "§¾÷×" #: ../../standalone/drakbackup_.c:1486 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:1525 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:1526 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:1527 msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../standalone/drakbackup_.c:1528 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1529 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:1530 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:1547 msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/drakbackup_.c:1574 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:1575 ../../standalone/drakbackup_.c:1599 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1597 ../../standalone/drakfont_.c:1058 #, fuzzy msgid "Remove Selected" msgstr "ѨÆÅ¢¼ò¨¾ ¿£ìÌ" #: ../../standalone/drakbackup_.c:1635 msgid "Windows (FAT32)" msgstr "" #: ../../standalone/drakbackup_.c:1674 msgid "Users" msgstr "ÀÂÉ÷¸û" #: ../../standalone/drakbackup_.c:1700 msgid "Use network connection to backup" msgstr "" #: ../../standalone/drakbackup_.c:1706 msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1707 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1708 msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup_.c:1709 msgid "Keys in place already" msgstr "" #: ../../standalone/drakbackup_.c:1713 msgid "Please enter the host name or IP." msgstr "" #: ../../standalone/drakbackup_.c:1718 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:1723 #, fuzzy msgid "Please enter your login" msgstr "Á£ñÎõ ÓÂüº¢òÐ À¡÷ì¸×õ" #: ../../standalone/drakbackup_.c:1728 #, fuzzy msgid "Please enter your password" msgstr "¯í¸û ¸¼×¡ø¨Ä Á¡üÈ×õ" #: ../../standalone/drakbackup_.c:1734 msgid "Remember this password" msgstr "" #: ../../standalone/drakbackup_.c:1745 msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup_.c:1841 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1844 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup_.c:1849 #, fuzzy msgid "Please choose your CD/DVD media size" msgstr "¾ÂצºöÐ ¯í¸û Å¢¨ºôÀĨ¸ þ¼ «¨Á¨Åò §¾÷× ¦ºö¸" #: ../../standalone/drakbackup_.c:1855 msgid "Please check for multisession CD" msgstr "" #: ../../standalone/drakbackup_.c:1861 msgid "Please check if you are using CDRW media" msgstr "" #: ../../standalone/drakbackup_.c:1867 msgid "Please check if you want to erase your RW media (1st Session)" msgstr "" #: ../../standalone/drakbackup_.c:1868 msgid " Erase Now " msgstr "" #: ../../standalone/drakbackup_.c:1874 msgid "Please check if you are using a DVDR device" msgstr "" #: ../../standalone/drakbackup_.c:1880 msgid "Please check if you are using a DVDRAM device" msgstr "" #: ../../standalone/drakbackup_.c:1893 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:1926 msgid "No CD device defined!" msgstr "" #: ../../standalone/drakbackup_.c:1974 msgid "Use tape to backup" msgstr "" #: ../../standalone/drakbackup_.c:1977 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:1983 msgid "Please check if you want to use the non-rewinding device." msgstr "" #: ../../standalone/drakbackup_.c:1989 msgid "Please check if you want to erase your tape before the backup." msgstr "" #: ../../standalone/drakbackup_.c:1995 msgid "Please check if you want to eject your tape after the backup." msgstr "" #: ../../standalone/drakbackup_.c:2001 ../../standalone/drakbackup_.c:2074 #: ../../standalone/drakbackup_.c:3025 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:2066 msgid "Please enter the directory to save to:" msgstr "" #: ../../standalone/drakbackup_.c:2080 ../../standalone/drakbackup_.c:3031 msgid "Use quota for backup files." msgstr "" #: ../../standalone/drakbackup_.c:2146 msgid "Network" msgstr "ŨĨÁôÒ" #: ../../standalone/drakbackup_.c:2151 msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup_.c:2156 msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup_.c:2161 #, fuzzy msgid "Tape" msgstr "Ũ¸:" #: ../../standalone/drakbackup_.c:2175 ../../standalone/drakbackup_.c:2179 #: ../../standalone/drakbackup_.c:2183 msgid "hourly" msgstr "" #: ../../standalone/drakbackup_.c:2176 ../../standalone/drakbackup_.c:2180 #: ../../standalone/drakbackup_.c:2183 #, fuzzy msgid "daily" msgstr "Á¢ýÉïºø" #: ../../standalone/drakbackup_.c:2177 ../../standalone/drakbackup_.c:2181 #: ../../standalone/drakbackup_.c:2183 msgid "weekly" msgstr "" #: ../../standalone/drakbackup_.c:2178 ../../standalone/drakbackup_.c:2182 #: ../../standalone/drakbackup_.c:2183 msgid "monthly" msgstr "" #: ../../standalone/drakbackup_.c:2196 #, fuzzy msgid "Use daemon" msgstr "ʧÃìÀÂÉ÷" #: ../../standalone/drakbackup_.c:2201 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" #: ../../standalone/drakbackup_.c:2207 #, fuzzy msgid "" "Please choose the\n" "media for backup." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../standalone/drakbackup_.c:2214 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup_.c:2251 msgid "Send mail report after each backup to :" msgstr "" #: ../../standalone/drakbackup_.c:2257 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup_.c:2296 #, fuzzy msgid "What" msgstr "§¸¡Ð¨Á¿¢Èõ" #: ../../standalone/drakbackup_.c:2301 #, fuzzy msgid "Where" msgstr "þ¦¾¦Ãô" #: ../../standalone/drakbackup_.c:2306 #, fuzzy msgid "When" msgstr "§¸¡Ð¨Á¿¢Èõ" #: ../../standalone/drakbackup_.c:2311 #, fuzzy msgid "More Options" msgstr "Å¢ÕôÀò§¾÷׸û" #: ../../standalone/drakbackup_.c:2330 ../../standalone/drakbackup_.c:3873 #, fuzzy msgid "Drakbackup Configuration" msgstr "ºõÀ¡ ÅÊŨÁôÒ" #: ../../standalone/drakbackup_.c:2348 #, fuzzy msgid "Please choose where you want to backup" msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../standalone/drakbackup_.c:2350 #, fuzzy msgid "on Hard Drive" msgstr "ʧÃìÅý¦À¡Õû" #: ../../standalone/drakbackup_.c:2360 #, fuzzy msgid "across Network" msgstr "ŨĨÁôÒ" #: ../../standalone/drakbackup_.c:2370 #, fuzzy msgid "on CDROM" msgstr "º¢Ê²üÈõ/þÈì¸õ" #: ../../standalone/drakbackup_.c:2378 msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup_.c:2421 #, fuzzy msgid "Please choose what you want to backup" msgstr "¿£í¸û ÀÂýÀÎò¾ Å¢ÕõÒõ ¦Á¡Æ¢¨Âò §¾÷×î ¦ºöÂ×õ" #: ../../standalone/drakbackup_.c:2422 #, fuzzy msgid "Backup system" msgstr "¸¡ô¦ÀÎò¾ø" #: ../../standalone/drakbackup_.c:2423 #, fuzzy msgid "Backup Users" msgstr "¸¡ô¦ÀÎò¾ø" #: ../../standalone/drakbackup_.c:2426 #, fuzzy msgid "Select user manually" msgstr "¨¸áÄ¢ø §¾Î" #: ../../standalone/drakbackup_.c:2508 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:2509 #, fuzzy msgid "" "\n" "- System Files:\n" msgstr "º¡Çà À¡ó¾õ" #: ../../standalone/drakbackup_.c:2511 #, fuzzy msgid "" "\n" "- User Files:\n" msgstr "ÀÂÉ÷ À¡ó¾õ" #: ../../standalone/drakbackup_.c:2513 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2515 #, c-format msgid "" "\n" "- Save on Hard drive on path : %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2518 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup_.c:2524 msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup_.c:2525 #, fuzzy msgid "RW" msgstr "R" #: ../../standalone/drakbackup_.c:2526 #, fuzzy, c-format msgid " on device : %s" msgstr "±Ä¢Â¢ý Ũ¸: %s\n" #: ../../standalone/drakbackup_.c:2527 msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup_.c:2528 #, c-format msgid "" "\n" "- Save to Tape on device : %s" msgstr "" #: ../../standalone/drakbackup_.c:2529 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup_.c:2532 #, c-format msgid "" "\n" "- Save via %s on host : %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2533 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:2534 #, fuzzy msgid "" "\n" "- Options:\n" msgstr "Å¢ÕôÀò§¾÷׸û" #: ../../standalone/drakbackup_.c:2535 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:2538 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:2540 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:2543 #, c-format msgid "" "\n" "- Daemon (%s) include :\n" msgstr "" #: ../../standalone/drakbackup_.c:2544 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:2545 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:2546 msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup_.c:2547 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:2548 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:2549 msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup_.c:2550 msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup_.c:2552 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:2558 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2725 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2727 msgid "Please uncheck or remove it on next time." msgstr "" #: ../../standalone/drakbackup_.c:2737 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:2758 msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup_.c:2759 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:2877 msgid " Restore Configuration " msgstr "" #: ../../standalone/drakbackup_.c:2895 msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup_.c:2912 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:2975 msgid "Backup the system files before:" msgstr "" #: ../../standalone/drakbackup_.c:2977 #, fuzzy msgid "please choose the date to restore" msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../standalone/drakbackup_.c:3014 msgid "Use Hard Disk to backup" msgstr "" #: ../../standalone/drakbackup_.c:3017 #, fuzzy msgid "Please enter the directory to save:" msgstr "¯í¸ÙìÌ §¾¨ÅÂ¡É À¡Ð¸¡ôÒ ¿¢¨Ä¨Âò §¾÷×î ¦ºöÂ×õ" #: ../../standalone/drakbackup_.c:3060 #, fuzzy msgid "FTP Connection" msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../standalone/drakbackup_.c:3067 #, fuzzy msgid "Secure Connection" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢" #: ../../standalone/drakbackup_.c:3093 msgid "Restore from Hard Disk." msgstr "" #: ../../standalone/drakbackup_.c:3095 msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup_.c:3157 msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbackup_.c:3159 #, fuzzy msgid "Other Media" msgstr "±¾¢Ã¢Âø" #: ../../standalone/drakbackup_.c:3164 #, fuzzy msgid "Restore system" msgstr "þÂì¸ò¨¾ ¿¢Ú×í¸û" #: ../../standalone/drakbackup_.c:3165 msgid "Restore Users" msgstr "" #: ../../standalone/drakbackup_.c:3166 #, fuzzy msgid "Restore Other" msgstr "ÁÚ¦¾¡¼ì¸õ" #: ../../standalone/drakbackup_.c:3168 msgid "select path to restore (instead of /)" msgstr "" #: ../../standalone/drakbackup_.c:3172 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:3174 msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup_.c:3232 msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup_.c:3241 #, fuzzy msgid "Custom Restore" msgstr "¾É¢ôÀÂÉ¡ìÌ" #: ../../standalone/drakbackup_.c:3287 ../../standalone/drakbackup_.c:3320 #: ../../standalone/drakbackup_.c:3346 ../../standalone/drakbackup_.c:3373 #: ../../standalone/drakbackup_.c:3400 ../../standalone/drakbackup_.c:3460 #: ../../standalone/drakbackup_.c:3487 ../../standalone/drakbackup_.c:3513 msgid "Previous" msgstr "" #: ../../standalone/drakbackup_.c:3291 ../../standalone/drakbackup_.c:3377 #: ../../standalone/logdrake_.c:223 msgid "Save" msgstr "§ºÁ¢" #: ../../standalone/drakbackup_.c:3350 #, fuzzy msgid "Build Backup" msgstr "¸¡ô¦ÀÎò¾ø" #: ../../standalone/drakbackup_.c:3404 ../../standalone/drakbackup_.c:3974 #, fuzzy msgid "Restore" msgstr "ÁÚ¦¾¡¼ì¸õ" #: ../../standalone/drakbackup_.c:3553 msgid "" "Please Build backup before to restore it...\n" " or verify that your path to save is correct." msgstr "" #: ../../standalone/drakbackup_.c:3574 msgid "" "Error during sendmail\n" " your report mail was not sent\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:3598 #, fuzzy msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "%s ±ýÈ ¦À¡¾¢ ¿¢ÚÅôÀ¼§ÅñÎõ.µôÒ¾ø ¾Ã×õ?" #: ../../standalone/drakbackup_.c:3621 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:3644 msgid "Please select data to restore..." msgstr "" #: ../../standalone/drakbackup_.c:3665 msgid "Please select media for backup..." msgstr "" #: ../../standalone/drakbackup_.c:3687 msgid "Please select data to backup..." msgstr "" #: ../../standalone/drakbackup_.c:3709 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:3730 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:3811 msgid "Backup system files" msgstr "" #: ../../standalone/drakbackup_.c:3813 msgid "Backup user files" msgstr "" #: ../../standalone/drakbackup_.c:3815 msgid "Backup other files" msgstr "" #: ../../standalone/drakbackup_.c:3817 ../../standalone/drakbackup_.c:3850 msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup_.c:3841 msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup_.c:3845 #, fuzzy msgid "Sending files..." msgstr "§¸¡ôÒ¸¨Çì ¸ñÎÀ¢Ê " #: ../../standalone/drakbackup_.c:3931 #, fuzzy msgid "Backup Now from configuration file" msgstr "Å¢¨Ã× ¦ÅðÊ,¿¸¦ÄÎìÌï ¦ºÕ¸¢ ÅÊŨÁôÀ¡ý" #: ../../standalone/drakbackup_.c:3936 #, fuzzy msgid "View Backup Configuration." msgstr "k¦¾¡¼÷Ò ÅÊŨÁôÒ" #: ../../standalone/drakbackup_.c:3956 #, fuzzy msgid "Wizard Configuration" msgstr "Á¢Ê ÅÊŨÁôÒ" #: ../../standalone/drakbackup_.c:3961 #, fuzzy msgid "Advanced Configuration" msgstr "ŨĨÁôÀ¡ì¸ ÅÊŨÁôÒ" #: ../../standalone/drakbackup_.c:3966 #, fuzzy msgid "Backup Now" msgstr "¸¡ô¦ÀÎò¾ø" #: ../../standalone/drakbackup_.c:3996 #, fuzzy msgid "Drakbackup" msgstr "¸¡ô¦ÀÎò¾ø" #: ../../standalone/drakbackup_.c:4045 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4075 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4083 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4122 msgid "" "restore description:\n" " \n" "Only the most recent date will be used ,because with incremental \n" "backups it is necesarry to restore one by one each older backups.\n" "\n" "So if you don't like to restore a user please unselect all his\n" "check box.\n" "\n" "Otherwise, you are able to select only one of this\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use backup, this option allow you \n" "\tto backup all your data the first time, and \n" "\tonly the changed after.\n" "\tSo you will be able during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this options all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4148 ../../standalone/drakbackup_.c:4225 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup_.c:4150 ../../standalone/drakbackup_.c:4227 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup_.c:4152 ../../standalone/drakbackup_.c:4229 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: ../../standalone/drakbackup_.c:4166 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4204 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4213 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakbackup_.c:4243 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, Drakbackup will remove\n" " your original directory and verify that all\n" " backup files are not corrupted. It is recommended\n" " you do a last backup before restoring.\n" " \n" "\n" msgstr "" #: ../../standalone/drakboot_.c:57 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "" #: ../../standalone/drakbug_.c:40 #, c-format msgid "" "drakbug version %s\n" "Copyright (C) 2002 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "usage: drakbug [OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" msgstr "" #: ../../standalone/drakbug_.c:47 msgid " --help - print this help message.\n" msgstr "" #: ../../standalone/drakbug_.c:48 msgid " --report - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:49 msgid " --incident - program should be one of mandrake tools\n" msgstr "" #: ../../standalone/drakbug_.c:64 msgid "Mandrake Bug Report Tool" msgstr "ʧÃìÀ¢¨Æ «È¢Å¢ôÀ¡Çý ¸ÕÅ¢" #: ../../standalone/drakbug_.c:70 msgid "First Time Wizard" msgstr "ʧÃìÀ¾¢× " #: ../../standalone/drakbug_.c:71 msgid "Synchronization tool" msgstr "´ò¾¢Âì¸ ¸ÕÅ¢¸û" #: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:85 #: ../../standalone/drakbug_.c:150 ../../standalone/drakbug_.c:152 #: ../../standalone/drakbug_.c:156 msgid "Standalone Tools" msgstr "º¢Ä ¸ÕÅ¢¸û" #: ../../standalone/drakbug_.c:73 msgid "HardDrake" msgstr "ʧÃìÅý¦À¡Õû" #: ../../standalone/drakbug_.c:74 msgid "Mandrake Online" msgstr "Á¡ñʧÃìþ¨½Â" #: ../../standalone/drakbug_.c:75 msgid "Menudrake" msgstr "ʧÃìÀðÊ" #: ../../standalone/drakbug_.c:76 msgid "Msec" msgstr "ʧÃìÀ¡Ð¸¡ôÒ" #: ../../standalone/drakbug_.c:77 msgid "Remote Control" msgstr "ʧÃ즾¡¨ÄôÒÆí¸¢" #: ../../standalone/drakbug_.c:78 msgid "Software Manager" msgstr "ʧÃì¦À¡¾¢" #: ../../standalone/drakbug_.c:79 msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbug_.c:80 msgid "Windows Migration tool" msgstr "ʧÃìÅ¢ýÁ¡üÈ¢" #: ../../standalone/drakbug_.c:81 msgid "Userdrake" msgstr "ʧÃìÀÂÉ÷" #: ../../standalone/drakbug_.c:82 msgid "Configuration Wizards" msgstr "ʧÃìÁ¡Â¡Å¢¸û" #: ../../standalone/drakbug_.c:96 msgid "Application:" msgstr "¿¢Ãø: " #: ../../standalone/drakbug_.c:97 msgid "Package: " msgstr "¦À¡¾¢: " #: ../../standalone/drakbug_.c:98 msgid "Kernel:" msgstr "¸Õ: " #: ../../standalone/drakbug_.c:99 msgid "Release: " msgstr "¦ÅǢ£Î: " #: ../../standalone/drakbug_.c:114 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://www.bugzilla.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" "\n" "\n" "À¢¨Æ «È¢Å¢ôÀ¡Çý\n" #: ../../standalone/drakbug_.c:135 msgid "Report" msgstr "«È¢ì¨¸" #: ../../standalone/drakbug_.c:165 msgid "Not installed" msgstr "¿¢ÚÅôÀ¼Å¢ø¨Ä" #: ../../standalone/drakbug_.c:182 msgid "connecting to Bugzilla wizard ..." msgstr "À캢ġ§Å¡Î þ¨½¸¢ÈÐ" #: ../../standalone/drakbug_.c:189 msgid "No browser available! Please install one" msgstr "§Á§Ä¡Ê ²ÐÁ¢ø¨Ä.¾ÂצºöÐ ¿¢ÚÅ×õ" #: ../../standalone/drakconnect_.c:79 #, c-format msgid "Network configuration (%d adapters)" msgstr "ŨĨÁôÀ¡ì¸õ ÅÊŨÁôÒ (%d «ð¨¼¸û)" #: ../../standalone/drakconnect_.c:86 ../../standalone/drakconnect_.c:594 msgid "Profile: " msgstr "ÀÂÉ÷ÌÈ¢ôÒ: " #: ../../standalone/drakconnect_.c:94 msgid "Del profile..." msgstr "ÀÂÉ÷ÌÈ¢ô¨À ¿£ìÌ: " #: ../../standalone/drakconnect_.c:100 msgid "Profile to delete:" msgstr "¿£ì¸ §ÅñÊ ÀÂÉ÷ÌÈ¢ôÒ:" #: ../../standalone/drakconnect_.c:128 msgid "New profile..." msgstr "Ò¾¢Â ÀÂÉ÷ÌÈ¢ôÒ " #: ../../standalone/drakconnect_.c:134 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr ":Ò¾¢Â ÀÂÉ÷ÌÈ¢ôÀ¢ý ¦ÀÂ÷ (þô§À¡ÐûǨ¾ ´òÐ þÕìÌõ) " #: ../../standalone/drakconnect_.c:160 msgid "Hostname: " msgstr "¸½¢½¢Â¢ý¦ÀÂ÷: " #: ../../standalone/drakconnect_.c:167 msgid "Internet access" msgstr "þ¨½Âò¦¾¡¼÷Ò" #: ../../standalone/drakconnect_.c:180 msgid "Type:" msgstr "Ũ¸:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Gateway:" msgstr "ѨÆš¢ø:" #: ../../standalone/drakconnect_.c:183 ../../standalone/drakconnect_.c:375 msgid "Interface:" msgstr "«ð¨¼:" #: ../../standalone/drakconnect_.c:194 msgid "Status:" msgstr "¿¢¨Ä:" #: ../../standalone/drakconnect_.c:201 msgid "Wait please" msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ..." #: ../../standalone/drakconnect_.c:219 msgid "Configure Internet Access..." msgstr "þ¨½Âò¦¾¡¼÷¨À ÅÊŨÁì¸×õ..." #: ../../standalone/drakconnect_.c:226 ../../standalone/drakconnect_.c:448 msgid "LAN configuration" msgstr "LAN ÅÊŨÁôÒ.." #: ../../standalone/drakconnect_.c:231 msgid "Driver" msgstr "þÂ츿¢Ãø" #: ../../standalone/drakconnect_.c:231 msgid "Interface" msgstr "«ð¨¼" #: ../../standalone/drakconnect_.c:231 msgid "Protocol" msgstr "ŨÃÓ¨È" #: ../../standalone/drakconnect_.c:231 msgid "State" msgstr "¿¢¨Ä" #: ../../standalone/drakconnect_.c:243 msgid "Configure Local Area Network..." msgstr "LAN-³ ÅÊŨÁì¸×õ..." #: ../../standalone/drakconnect_.c:255 msgid "Click here to launch the wizard ->" msgstr "Á¡Â¡Å¢¨Âò ÐÅì¸ þíÌ ¸¢Ç¢ì ¦ºö¸ ->" #: ../../standalone/drakconnect_.c:256 msgid "Wizard..." msgstr "Á¡Â¡Å¢..." #: ../../standalone/drakconnect_.c:282 msgid "Apply" msgstr "¦ºÂøÀÎòÐ" #: ../../standalone/drakconnect_.c:301 msgid "Please Wait... Applying the configuration" msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ...¦ºÂøÀÎò¾ôÀθ¢ÈÐ" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Connected" msgstr "þ¨½ì¸ôÀð¼ûÇÐ" #: ../../standalone/drakconnect_.c:383 ../../standalone/drakconnect_.c:406 msgid "Not connected" msgstr "þ¨½ì¸ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Connect..." msgstr "þ¨½..." #: ../../standalone/drakconnect_.c:384 ../../standalone/drakconnect_.c:407 msgid "Disconnect..." msgstr "þ¨½ôÀ¢Ä¢ÕóРŢÎÀÎ" #: ../../standalone/drakconnect_.c:403 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "±îºÃ¢ì¨¸, ÁüÚ¦Á¡Ú þ¨½Âò¦¾¡¼÷Ò ¸ñÎÀ¢Êì¸ôÀðÎûÇÐ. þÐ «§¿¸Á¡¸ ¯í¸û " "ŨĨÁôÀ¡ì¸ò¨¾ ÀÂýÀÎò¾Ä¡õ" #: ../../standalone/drakconnect_.c:430 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "ŨĨÁôÒ «ð¨¼¸û ±Ð×õ ÅÊŨÁì¸ôÀ¼Å¢ø¨Ä.\n" "ÅÊŨÁì¸ ÅÊŨÁ ±ýÈ ¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºöÂ×õ" #: ../../standalone/drakconnect_.c:452 msgid "LAN Configuration" msgstr "ŨĨÁôÀ¡ì¸ ÅÊŨÁôÒ" #: ../../standalone/drakconnect_.c:463 #, c-format msgid "Adapter %s: %s" msgstr "ŨĨÁôÒ «ð¨¼ %s: %s" #: ../../standalone/drakconnect_.c:469 msgid "Boot Protocol" msgstr "¦¾¡¼íÌ Å¨ÃÓ¨È" #: ../../standalone/drakconnect_.c:470 msgid "Started on boot" msgstr "¦¾¡¼íÌõ§À¡§¾ ÐÅ츢ŢÎ" #: ../../standalone/drakconnect_.c:471 msgid "DHCP client" msgstr "DHCP §ÅñÊ" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 msgid "activate now" msgstr "þô§À¡Ð ÐÅìÌ" #: ../../standalone/drakconnect_.c:496 ../../standalone/drakconnect_.c:499 msgid "deactivate now" msgstr "þô§À¡Ð ¿¢ÚòÐ" #: ../../standalone/drakconnect_.c:502 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "þó¾ ŨĨÁôÒ «ð¨¼ þýÛõ ÅÊŨÁì¸ôÀ¼Å¢ø¨Ä\n" "þ¾üì¸¡É Á¡Â¡Å¢¨Âò ÐÅìÌ" #: ../../standalone/drakconnect_.c:559 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "¯í¸Ç¢¼õ ¾ü§À¡Ð þ¨½Âò¦¾¡¼÷Ò þø¨Ä..\n" "¦¾¡¼÷¨À ¯ÕÅ¡ì¸ ÅÊŨÁ ±ýÈ ¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºö" #: ../../standalone/drakconnect_.c:583 msgid "Internet connection configuration" msgstr "þ¨½Âò¦¾¡¼÷Ò ÅÊŨÁì¸ôÀ¡Çý" #: ../../standalone/drakconnect_.c:587 msgid "Internet Connection Configuration" msgstr "þ¨½Âò¦¾¡¼÷Ò ÅÊŨÁì¸ôÀ¡Çý" #: ../../standalone/drakconnect_.c:596 msgid "Connection type: " msgstr "¦¾¡¼÷Ò Å¨¸: " #: ../../standalone/drakconnect_.c:602 msgid "Parameters" msgstr "ŨÃÓ¨È" #: ../../standalone/drakconnect_.c:620 msgid "Gateway" msgstr "ѨÆš¢ø" #: ../../standalone/drakconnect_.c:629 msgid "Ethernet Card" msgstr "ŨĨÁôÒ «ð¨¼" #: ../../standalone/drakconnect_.c:630 msgid "DHCP Client" msgstr "DHCP §ÅñÊ" #: ../../standalone/drakfloppy_.c:63 msgid "usage: drakfloppy\n" msgstr "ÀÂýÀ¡Î: ʧÃ즿¸¢ú¾ðÎ\n" #: ../../standalone/drakfloppy_.c:67 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/drakfloppy_.c:68 msgid "Module name" msgstr "ÜüÈ¢ý ¦ÀÂ÷" #: ../../standalone/drakfloppy_.c:68 msgid "Size" msgstr "«Ç×" #: ../../standalone/drakfloppy_.c:73 ../../standalone/drakfloppy_.c:372 msgid "drakfloppy" msgstr "ʧÃ즿¸¢ú¾ðÎ" #: ../../standalone/drakfloppy_.c:90 msgid "boot disk creation" msgstr "¦¾¡¼íÌ ¾ð¼ ¯ÕÅ¡ì¸õ" #: ../../standalone/drakfloppy_.c:98 ../../standalone/drakfloppy_.c:111 msgid "default" msgstr "¦¸¡¼¡¿¢¨Ä" #: ../../standalone/drakfloppy_.c:114 #, c-format msgid "DrakFloppy Error: %s" msgstr "ʧÃ즿¸¢ú¾ðÎ À¢¨Æ : %s" #: ../../standalone/drakfloppy_.c:125 msgid "kernel version" msgstr "¸Õ ¦ÅǢ£Î" #: ../../standalone/drakfloppy_.c:131 msgid "General" msgstr "¦À¡Ð" #: ../../standalone/drakfloppy_.c:136 msgid "Expert Area" msgstr "¾É¢òÐÅÁ¢ì¸ ШÈ" #: ../../standalone/drakfloppy_.c:139 msgid "mkinitrd optional arguments" msgstr "" #: ../../standalone/drakfloppy_.c:140 msgid "Add a module" msgstr "Üü¨Èî §º÷" #: ../../standalone/drakfloppy_.c:160 msgid "force" msgstr "ÅÄ¢óÐ ¦ºö" #: ../../standalone/drakfloppy_.c:161 msgid "if needed" msgstr "§¾¨ÅôÀð¼¡ø" #: ../../standalone/drakfloppy_.c:162 msgid "omit scsi modules" msgstr "scsi ÜÚ¸¨Ç §º÷측§¾" #: ../../standalone/drakfloppy_.c:163 msgid "omit raid modules" msgstr " raid ÜÚ¸¨Ç §º÷측§¾" #: ../../standalone/drakfloppy_.c:199 msgid "Remove a module" msgstr "ÜÚ¸¨Ç ¿£ì¸¢Å¢Î" #: ../../standalone/drakfloppy_.c:221 msgid "Output" msgstr "¦ÅÇ¢ôÀ¡Î" #: ../../standalone/drakfloppy_.c:233 msgid "Build the disk" msgstr "¾ð¨¼ ¯ÕÅ¡ìÌ" #: ../../standalone/drakfloppy_.c:421 #, c-format msgid "Be sure a media is present for the device %s" msgstr " %s º¡¾Éò¾¢ø °¼¸õ ¯ûǾ¡ ±Éî ºÃ¢À¡÷" #: ../../standalone/drakfloppy_.c:426 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "%s º¡¾Éò¾¢ø °¼¸õ þø¨Ä «øÄÐ ±Ø¾ ÓÊ¡¾ ¿¢¨Ä¢ø þÕì¸Ä¡õ. ¾ÂצºöÐ °¼¸ò¨¾ ¯ûǣΠ" "¦ºö" #: ../../standalone/drakfloppy_.c:428 #, c-format msgid "Unable to fork: %s" msgstr "" #: ../../standalone/drakfloppy_.c:432 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "mkbootdisk ã¼ ÁÊÂÅ¢ø¨Ä: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:231 #, fuzzy msgid "Search installed fonts" msgstr "¦À¡¾¢ §ÁÄ¡Ç÷" #: ../../standalone/drakfont_.c:233 #, fuzzy msgid "Unselect fonts installed" msgstr "¿¢ÚÅôÀ¼Å¢ø¨Ä" #: ../../standalone/drakfont_.c:257 msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont_.c:260 msgid "no fonts found" msgstr "" #: ../../standalone/drakfont_.c:269 ../../standalone/drakfont_.c:323 #: ../../standalone/drakfont_.c:379 ../../standalone/drakfont_.c:468 #: ../../standalone/drakfont_.c:479 ../../standalone/drakfont_.c:506 #: ../../standalone/drakfont_.c:520 ../../standalone/drakfont_.c:537 #, fuzzy msgid "done" msgstr "ÓÊó¾Ð" #: ../../standalone/drakfont_.c:275 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:321 #, fuzzy msgid "Reselect correct fonts" msgstr "±ØòÐÕò §¾÷Å¡Ç÷" #: ../../standalone/drakfont_.c:325 msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont_.c:349 msgid "Search fonts in installed list" msgstr "" #: ../../standalone/drakfont_.c:377 #, fuzzy msgid "Fonts copy" msgstr "±ØòÐÕì¸û" #: ../../standalone/drakfont_.c:381 #, fuzzy msgid "True Type fonts installation" msgstr "¿¢ÚÅø Ũ¸¨Âò §¾÷×î ¦ºö¸" #: ../../standalone/drakfont_.c:389 msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont_.c:394 msgid "True Type install done" msgstr "" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:429 #, fuzzy msgid "Fonts conversion" msgstr "þ󧾡ɢº¢Â ±ôÀÊî ¦ºö¾ø" #: ../../standalone/drakfont_.c:409 ../../standalone/drakfont_.c:433 #: ../../standalone/drakfont_.c:464 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:419 ../../standalone/drakfont_.c:442 msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont_.c:452 msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:459 msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:470 msgid "Suppress temporary Files" msgstr "" #: ../../standalone/drakfont_.c:473 #, fuzzy msgid "Restart XFS" msgstr "ÁÚ¦¾¡¼ì¸õ" #: ../../standalone/drakfont_.c:518 ../../standalone/drakfont_.c:532 msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont_.c:534 #, fuzzy msgid "xfs restart" msgstr "ÁÚ¦¾¡¼ì¸õ" #: ../../standalone/drakfont_.c:542 ../../standalone/drakfont_.c:951 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:630 #, fuzzy msgid "Fonts Importation" msgstr "Ÿ¢÷¸¨Ç ÅÊçðÎí¸û" #: ../../standalone/drakfont_.c:660 msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont_.c:668 msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont_.c:679 #, fuzzy msgid "Advanced Options" msgstr "«Ä¡¾¢Â¡É ¸ðÎôÀ¡Î¸û" #: ../../standalone/drakfont_.c:687 #, fuzzy msgid "Font List" msgstr "±ØòÐÕì¸û" #: ../../standalone/drakfont_.c:909 #, fuzzy msgid "Choose the applications that will support the fonts :" msgstr "±ó¾ ¿¢Ãø¸û ÐÅì¸ §ÅñΦÁÉ §¾÷× §ºöÔí¸û" #: ../../standalone/drakfont_.c:918 #, fuzzy msgid "Ghostscript" msgstr "PDF¸¡ðÊ" #: ../../standalone/drakfont_.c:925 #, fuzzy msgid "StarOffice" msgstr "«ÖÅø ¸ÕÅ¢¸û" #: ../../standalone/drakfont_.c:932 #, fuzzy msgid "Abiword" msgstr "«À¢§Å¡÷ð" #: ../../standalone/drakfont_.c:939 #, fuzzy msgid "Generic Printers" msgstr "¦À¡Ð-þÉ ¾¢¨Ã¸õ" #: ../../standalone/drakfont_.c:1016 msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont_.c:1063 #, fuzzy msgid "Install List" msgstr "þÂì¸ò¨¾ ¿¢Ú×í¸û" #: ../../standalone/drakfont_.c:1106 msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont_.c:1113 msgid "here if no." msgstr "" #: ../../standalone/drakfont_.c:1174 msgid "Unselected All" msgstr "" #: ../../standalone/drakfont_.c:1178 msgid "Selected All" msgstr "" #: ../../standalone/drakfont_.c:1182 #, fuzzy msgid "Remove List" msgstr "ѨÆÅ¢¼ò¨¾ ¿£ìÌ" #: ../../standalone/drakfont_.c:1204 ../../standalone/drakfont_.c:1237 #, fuzzy msgid "Initials tests" msgstr "Ó¾ø ¦ºö¾¢" #: ../../standalone/drakfont_.c:1207 #, fuzzy msgid "Copy fonts on your system" msgstr "ŨĨÁôÒ «ð¨¼ ±Ð×õ ¸¡½ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakfont_.c:1211 #, fuzzy msgid "Install & convert Fonts" msgstr "±ØòÐÕ «¨ÁôÒ, Óý§É¡ð¼õ" #: ../../standalone/drakfont_.c:1215 #, fuzzy msgid "Post Install" msgstr "±ØòÐÕ ¿¢ÚÅ¢" #: ../../standalone/drakfont_.c:1240 #, fuzzy msgid "Remove fonts on your system" msgstr "ŨĨÁôÒ «ð¨¼ ±Ð×õ ¸¡½ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakfont_.c:1244 #, fuzzy msgid "Post Uninstall" msgstr "¿¢ÚÅôÀ¼Å¢ø¨Ä" #: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:195 msgid "Internet Connection Sharing" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢" #: ../../standalone/drakgw_.c:121 msgid "Sorry, we support only 2.4 kernels." msgstr "2.4 ¸Õì¸û ÁðΧÁ ºÃ¢Â¡¸ À½¢Â¡üÚõ" #: ../../standalone/drakgw_.c:133 msgid "Internet Connection Sharing currently enabled" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð" #: ../../standalone/drakgw_.c:134 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð. ¾ü§À¡Ð \n" "þÂì¸ò¾¢Öõ ¯ûÇÐ.\n" "\n" "±ýÉ ¦ºö §ÅñÎõ?" #: ../../standalone/drakgw_.c:138 msgid "disable" msgstr "Ó¼Á¡ìÌ" #: ../../standalone/drakgw_.c:138 ../../standalone/drakgw_.c:163 msgid "dismiss" msgstr "¿£ìÌ" #: ../../standalone/drakgw_.c:138 ../../standalone/drakgw_.c:163 msgid "reconfigure" msgstr "ÁÚÅÊŨÁ" #: ../../standalone/drakgw_.c:141 msgid "Disabling servers..." msgstr "ÀâÁ¡È¢¸û Ó¼Á¡ì¸ôÀθ¢ýÈÉ..." #: ../../standalone/drakgw_.c:149 msgid "Internet connection sharing is now disabled." msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ¾ü§À¡Ð Ó¼Á¡ì¸ôÀðÎûÇÐ." #: ../../standalone/drakgw_.c:158 msgid "Internet Connection Sharing currently disabled" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ¾ü§À¡Ð Ó¼Á¡ì¸ôÀðÎûÇÐ." #: ../../standalone/drakgw_.c:159 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð.¬É¡ø, ¾ü§À¡Ð \n" " Ó¼ì¸ôÀðÎûÇÐ.\n" "\n" "±ýÉ ¦ºö §ÅñÎõ?" #: ../../standalone/drakgw_.c:163 msgid "enable" msgstr "¦ºÂøÀÎòÐ" #: ../../standalone/drakgw_.c:170 msgid "Enabling servers..." msgstr "ÀâÁ¡È¢¸¨Ç ¦ºÂøÀÎòÐ" #: ../../standalone/drakgw_.c:175 msgid "Internet connection sharing is now enabled." msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ¦ºÂøÀ¡ðÊø ¯ûÇÐ" #: ../../standalone/drakgw_.c:196 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "¯í¸û ¸½¢½¢ þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢Â¡¸.\n" " ÅÊŨÁì¸ôÀ¼ ÓÊÔõ. ¯í¸ÙìÌ þÐ §ÅñÎÁ¡ ¦À¡ÐÅ¡¸ ¿£í¸û ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾ " "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×öÔí¸û\n" "þ¾üÌ ´Õ ¾É¢ôÀð¼ ŨĨÁôÒ «ð¨¼ §¾¨Å" #: ../../standalone/drakgw_.c:222 #, c-format msgid "Interface %s (using module %s)" msgstr " %s ±ýÈ Å¨Ä¨ÁôÒ «ð¨¼( %s ±ýÈ þÂì¸ ¿¢Ãø ÀÂýÀ¡ðÊø ¯ûÇÐ) " #: ../../standalone/drakgw_.c:223 #, c-format msgid "Interface %s" msgstr " %s ±ýÈ Å¨Ä¨ÁôÒ «ð¨¼" #: ../../standalone/drakgw_.c:231 msgid "No network adapter on your system!" msgstr "ŨĨÁôÒ «ð¨¼ ±Ð×õ ¸¡½ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakgw_.c:232 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "ŨĨÁôÒ «ð¨¼ ±Ð×õ ¸¡½ôÀ¼Å¢ø¨Ä. Á£ñÎõ Åý¦À¡Õû ÅÊŨÁôÒì ¸ÕÅ¢¨Â þÂì¸×õ" #: ../../standalone/drakgw_.c:238 msgid "Network interface" msgstr "ŨĨÁôÒ «ð¨¼" #: ../../standalone/drakgw_.c:239 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "µ§Ã ´Õ ŨĨÁôÒ «ð¨¼ ÁðΧÁ ¯ûÇÐ\n" "\n" "%s\n" "\n" "þ¨¾ ¨ÅòÐ ¯í¸û ŨĨÁôÀ¡ì¸ò¨¾ «¨Áì¸ðÎÁ¡" #: ../../standalone/drakgw_.c:248 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "±ó¾ ŨĨÁôÒ «ð¨¼ ¯í¸û ŨĨÁôÀ¡ì¸òмý þ¨½óÐûÇÐ" #: ../../standalone/drakgw_.c:266 msgid "Network interface already configured" msgstr "ŨĨÁôÒ «ð¨¼ ²ü¸É§Å ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð" #: ../../standalone/drakgw_.c:267 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "ŨĨÁôÒ «ð¨¼(%s) ²ü¸É§Å ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð\n" "\n" "¿£í¸û ÁÚÅÊŨÁì¸ Å¢ÕõÒ¸¢È£÷¸Ç¡\n" "\n" "Å¡úòÐì¸û" #: ../../standalone/drakgw_.c:272 msgid "Automatic reconfiguration" msgstr "¾¡É¢Âì¸ ÅÊŨÁôÒ" #: ../../standalone/drakgw_.c:273 msgid "Show current interface configuration" msgstr "¾ü§À¡¨¾Â ÅÊŨÁô¨Àì ¸¡ðÎ" #: ../../standalone/drakgw_.c:275 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "`%s' ¾ü§À¡¨¾Â ÅÊŨÁôÒ:\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" #: ../../standalone/drakgw_.c:287 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the C-Class Network that " "you use for your local network; I will not reconfigure it and I will not " "touch your DHCP server configuration.\n" "\n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:292 msgid "C-Class Local Network" msgstr "C-Class Local Network" #: ../../standalone/drakgw_.c:293 msgid "(This) DHCP Server IP" msgstr "DHCP ÀâÁ¡È¢Â¢ý IP" #: ../../standalone/drakgw_.c:294 msgid "Re-configure interface and DHCP server" msgstr "ŨĨÁôÒ «ð¨¼¨ÂÔõ DHCP ÀâÁ¡È¢¨ÂÔõ Á¡üȢ¨Á" #: ../../standalone/drakgw_.c:301 msgid "The Local Network did not finish with `.0', bailing out." msgstr "À¢¨Æ §¿÷óÐûÇÐ ÁýÉ¢ì¸×õ" #: ../../standalone/drakgw_.c:312 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "%s! À¢¨Æ §¿÷óÐûÇÐ ÁýÉ¢ì¸×õ \n" #: ../../standalone/drakgw_.c:320 msgid "Firewalling configuration detected!" msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÒ ¸¡½ôÀðÎûÇÐ" #: ../../standalone/drakgw_.c:321 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÀ¡ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../standalone/drakgw_.c:328 msgid "Configuring..." msgstr "ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../standalone/drakgw_.c:329 msgid "Configuring scripts, installing software, starting servers..." msgstr "¦À¡¾¢¸û ¿¢ÚÅôÀðÎ ÅÊŨÁì¸ôÀθ¢ÈÐ..." #: ../../standalone/drakgw_.c:365 #, c-format msgid "Problems installing package %s" msgstr "%s ¦À¡¾¢¸¨Ç ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ" #: ../../standalone/drakgw_.c:549 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð.\n" "¯í¸û ŨĨÁôÀ¸ò¾¢ø ¯ûÇ ¸½¢½¢¸û þô§À¡Ð ¯í¸û þ¨½Âò ¦¾¡¼÷¨À ÀÂýÀÎò¾Ä¡õ" #: ../../standalone/drakgw_.c:566 msgid "The setup has already been done, but it's currently disabled." msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð.¬É¡ø, ¾ü§À¡Ð Ó¼ì¸ôÀðÎûÇÐ" #: ../../standalone/drakgw_.c:567 msgid "The setup has already been done, and it's currently enabled." msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð" #: ../../standalone/drakgw_.c:568 msgid "No Internet Connection Sharing has ever been configured." msgstr "þÐŨà þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁì¸ôÀ¼Å¢ø¨Ä" #: ../../standalone/drakgw_.c:573 msgid "Internet connection sharing configuration" msgstr "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁôÒ" #: ../../standalone/drakgw_.c:580 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "þ¨½Âò ¦¾¡¼÷Ò ÀâÁ¡È¢ ÅÊŨÁôÒìÌ Å¡Õí¸û!\n" "\n" "%s\n" "\n" "ÅÊŨÁ ±ýÈ ¦À¡ò¾¡¨É «Øò¾¢É¡ø þ¾ü¸¡É Á¡Â¡Å¢¨Âò ÐÅìÌ" #: ../../standalone/drakxtv_.c:49 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "Canada (cable)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv_.c:66 msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:67 msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv_.c:68 msgid "East Europe" msgstr "" #: ../../standalone/drakxtv_.c:68 #, fuzzy msgid "France [SECAM]" msgstr "À¢ÃïÍ" #: ../../standalone/drakxtv_.c:68 msgid "Ireland" msgstr "«Â÷Ä¡óÐ" #: ../../standalone/drakxtv_.c:68 msgid "West Europe" msgstr "" #: ../../standalone/drakxtv_.c:69 msgid "Australia" msgstr "¬Š¾¢§ÃĢ¡" #: ../../standalone/drakxtv_.c:69 #, fuzzy msgid "Newzealand" msgstr "¦¿¾÷Ä¡óÐ" #: ../../standalone/drakxtv_.c:70 msgid "South Africa" msgstr "" #: ../../standalone/drakxtv_.c:71 msgid "Argentina" msgstr "«÷¦ƒýÊÉ¡" #: ../../standalone/drakxtv_.c:72 msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv_.c:107 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv_.c:109 msgid "TV norm :" msgstr "" #: ../../standalone/drakxtv_.c:110 msgid "Area :" msgstr "" #: ../../standalone/drakxtv_.c:114 msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv_.c:122 msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:125 msgid "There was an error while scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:126 #, fuzzy msgid "XawTV isn't installed!" msgstr "¿¢ÚÅôÀ¼Å¢ø¨Ä" #: ../../standalone/drakxtv_.c:129 msgid "Have a nice day!" msgstr "þɢ ¿øÅ¡úòÐì¸û" #: ../../standalone/drakxtv_.c:130 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv_.c:153 msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv_.c:154 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/keyboarddrake_.c:16 msgid "usage: keyboarddrake [--expert] [keyboard]\n" msgstr "ÀÂýÀ¡Î: ʧÃìÅ¢¨º[--expert] [keyboard]\n" #: ../../standalone/keyboarddrake_.c:32 msgid "Please, choose your keyboard layout." msgstr "¾ÂצºöÐ ¯í¸û Å¢¨ºôÀĨ¸ þ¼ «¨Á¨Åò §¾÷× ¦ºö¸" #: ../../standalone/keyboarddrake_.c:41 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:24 msgid "Change Cd-Rom" msgstr "º¢Ê¨Â Á¡üÚ" #: ../../standalone/livedrake_.c:25 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "¾ÂצºöÐ ¿¢ÚÅø º¢Ê¨Â º¢ÊáÁ¢ø ¨Åì¸×õ.¨Åò¾×¼ý ºÃ¢ ±ýÈ \n" "¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºöÂ×õ. ¿£ìÌ ±ýÈ ¦À¡ò¾¡¨É ¸¢Ç¢ì ¦ºö¾¡ø ¿¢ÚÅø ¿¢ýÚÅ¢Îõ" #: ../../standalone/livedrake_.c:35 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/localedrake_.c:32 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:517 #, fuzzy msgid "logdrake" msgstr "Àðʦ¾¡ÌôÀ¡Ç÷" #: ../../standalone/logdrake_.c:95 msgid "Show only for the selected day" msgstr "" #: ../../standalone/logdrake_.c:102 msgid "/File/_New" msgstr "/§¸¡ôÒ/_Ò¾¢ÂÐ" #: ../../standalone/logdrake_.c:102 #, fuzzy msgid "N" msgstr "Q" #: ../../standalone/logdrake_.c:103 msgid "/File/_Open" msgstr "/§¸¡ôÒ/_¾¢È" #: ../../standalone/logdrake_.c:103 #, fuzzy msgid "O" msgstr "Q" #: ../../standalone/logdrake_.c:104 msgid "/File/_Save" msgstr "/§¸¡ôÒ/_§ºÁ¢" #: ../../standalone/logdrake_.c:104 #, fuzzy msgid "S" msgstr "Q" #: ../../standalone/logdrake_.c:105 #, fuzzy msgid "/File/Save _As" msgstr "/§¸¡ôÒ/_§ºÁ¢" #: ../../standalone/logdrake_.c:106 msgid "/File/-" msgstr "/§¸¡ôÒ/-" #: ../../standalone/logdrake_.c:108 msgid "/_Options" msgstr "/_Å¢ÕôÀò§¾÷×" #: ../../standalone/logdrake_.c:109 #, fuzzy msgid "/Options/Test" msgstr "/_Å¢ÕôÀò§¾÷×" #: ../../standalone/logdrake_.c:111 msgid "/Help/_About..." msgstr "/¯¾Å¢/_ÀüÈ¢..." #: ../../standalone/logdrake_.c:118 #, fuzzy msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/logdrake_.c:119 #, fuzzy msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*" #: ../../standalone/logdrake_.c:173 msgid "User" msgstr "ÀÂÉ÷" #: ../../standalone/logdrake_.c:174 #, fuzzy msgid "Messages" msgstr "Mesa-Å¢¨Ç¡ðÎ" #: ../../standalone/logdrake_.c:175 msgid "Syslog" msgstr "" #: ../../standalone/logdrake_.c:176 #, fuzzy msgid "Mandrake Tools Explanations" msgstr "Á¡ñʧÃì ¸ðÎôÀ¡Î ¨ÁÂõ" #: ../../standalone/logdrake_.c:179 #, fuzzy msgid "search" msgstr "âÁ¢" #: ../../standalone/logdrake_.c:185 #, fuzzy msgid "A tool to monitor your logs" msgstr "¨¸ì¸½¢½¢ ¿¢Ãø " #: ../../standalone/logdrake_.c:186 msgid "Settings" msgstr "«¨ÁôÒ¸û" #: ../../standalone/logdrake_.c:191 msgid "matching" msgstr "" #: ../../standalone/logdrake_.c:192 msgid "but not matching" msgstr "" #: ../../standalone/logdrake_.c:196 #, fuzzy msgid "Choose file" msgstr "º¡¾Éò¨¾ §¾÷×î ¦ºöÔí¸û" #: ../../standalone/logdrake_.c:201 #, fuzzy msgid "Calendar" msgstr "¿¡ð¸¡ðÊ " #: ../../standalone/logdrake_.c:211 #, fuzzy msgid "Content of the file" msgstr "þ¨½Âò¨¾ ÀÂýÀÎò¾ ¦¾¡¼÷Ò ²üÀÎòÐ" #: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:391 #, fuzzy msgid "Mail alert" msgstr "Á¢ýÉïºø" #: ../../standalone/logdrake_.c:267 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../standalone/logdrake_.c:408 #, fuzzy msgid "Mail alert configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../standalone/logdrake_.c:409 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../standalone/logdrake_.c:416 msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake_.c:417 msgid "Domain Name Resolver" msgstr "" #: ../../standalone/logdrake_.c:418 #, fuzzy msgid "Ftp Server" msgstr "§º¨Å¸õ" #: ../../standalone/logdrake_.c:419 #, fuzzy msgid "Postfix Mail Server" msgstr "Á¢ýÉïºø ÀâÁ¡È¢" #: ../../standalone/logdrake_.c:420 #, fuzzy msgid "Samba Server" msgstr "´Ä¢ô ÀâÁ¡È¢" #: ../../standalone/logdrake_.c:421 #, fuzzy msgid "SSH Server" msgstr "§º¨Å¸õ" #: ../../standalone/logdrake_.c:422 #, fuzzy msgid "Webmin Service" msgstr "ÐÅì¸î§º¨Å¸û" #: ../../standalone/logdrake_.c:423 #, fuzzy msgid "Xinetd Service" msgstr "ÐÅì¸î§º¨Å¸û" #: ../../standalone/logdrake_.c:430 #, fuzzy msgid "service setting" msgstr "±Ä¢ «¨ÁôÒì¸û" #: ../../standalone/logdrake_.c:431 msgid "" "You will receive an alert if one of the selected service is no more running" msgstr "" #: ../../standalone/logdrake_.c:443 #, fuzzy msgid "load setting" msgstr "Åñ½ «¨ÁôÒ¸û" #: ../../standalone/logdrake_.c:444 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:457 msgid "alert configuration" msgstr "«È¢Å¢ôÀ¡Çâý ÅÊŨÁôÒ " #: ../../standalone/logdrake_.c:458 msgid "Please enter your email address below " msgstr "¯í¸û Á¢ýÉïºø Ó¸Åâ¨Âò ¾Õ¸" #: ../../standalone/logdrake_.c:499 msgid "Save as.." msgstr "±Éî §ºÁ¢.." #: ../../standalone/mousedrake_.c:43 msgid "Please, choose the type of your mouse." msgstr "¾ÂצºöÐ, ¯í¸û ±Ä¢Â¢ý Ũ¸¨Âò §¾÷×î ¦ºöÔí¸û" #: ../../standalone/mousedrake_.c:57 msgid "Emulate third button?" msgstr "ãýÈ¡ÅÐ ¦À¡ò¾¡ý þÕôÀ¾¡¸ ¸ÕÐí¸û?" #: ../../standalone/printerdrake_.c:48 msgid "Reading printer data ..." msgstr "«îͦÀ¡È¢Â¢ý ¾Ã× ÀÊì¸ôÀθ¢ÈÐ" #: ../../standalone/scannerdrake_.c:41 msgid "Detecting devices ..." msgstr "º¡¾Éí¸¨Ç ¸ñÎÀ¢Êò¾ø" #: ../../standalone/scannerdrake_.c:41 msgid "Test ports" msgstr "Шȸ¨Çî §º¡¾¢ò¾ø" #: ../../standalone/scannerdrake_.c:52 #, c-format msgid "%s found on %s, configure it ?" msgstr "%s ±ýÈ ¸ÕÅ¢ %s ¢ø þ¨½ì¸ôÀðÎûÇÐ.þ¨¾ ÅÊŨÁì¸ðÎÁ¡?" #: ../../standalone/scannerdrake_.c:59 msgid "Select a scanner" msgstr "ÅÕʨ §¾÷×î ¦ºöÔí¸û" #: ../../standalone/scannerdrake_.c:79 #, c-format msgid "This %s scanner is unsupported" msgstr "¯í¸û %s ÅÕÊ ¾ü§À¡Ð §Å¨Äî ¦ºö¡Ð" #: ../../standalone/scannerdrake_.c:93 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" "¯í¸û %s ÅÕÊ ÅÊŨÁì¸ôÀ¼Å¢ø¨Ä \n" "º¡¾Éò¨¾ ºÃ¢Â¡¸ò §¾÷×î ¦ºöÔí¸û" #: ../../standalone/scannerdrake_.c:95 msgid "choose device" msgstr "º¡¾Éò¨¾ §¾÷×î ¦ºöÔí¸û" #: ../../standalone/scannerdrake_.c:101 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "¯í¸û %s ÅÕÊ ÅÊŨÁì¸ôÀ¼ §ÅñÎõ\n" "«¾üÌ Ê§Ãì«îÍ ¿¢Ã¨Ä ÀÂýÀÎòÐí¸û" #: ../../standalone/scannerdrake_.c:106 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" "¯í¸û %s ÅÕÊ ÅÊŨÁì¸ôÀðÎÅ¢ð¼Ð\n" "¿£í¸û Àø漸õ-ŨÃÅ¢Âø-ÅÕÊ ±ýÈ ¿¢Ã¨Ä ÀÂýÀÎòÐí¸û" #: ../../standalone/service_harddrake_.c:57 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "\"%s\" Ũ¸ º¡¾Éõ ´ýÚ À¢Ã¢ì¸ôÀðÎûÇÐ:\n" #: ../../standalone/service_harddrake_.c:61 #, c-format msgid "" "\n" "Some devices in the %s class were added:\n" msgstr "" "\n" " %s Ũ¸ º¡¾Éõ ´ýÚ §º÷ì¸ôÀðÎûÇÐ:\n" #: ../../standalone/tinyfirewall_.c:30 msgid "Firewalling Configuration" msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÒ" #: ../../standalone/tinyfirewall_.c:43 msgid "Firewalling configuration" msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÒ" #: ../../standalone/tinyfirewall_.c:78 msgid "" "Firewalling\n" "\n" "You already have set up a firewall.\n" "Click on Configure to change or remove the firewall" msgstr "" "¦¿ÕôÒîÍÅ÷\n" "\n" "¿£`¹¸û ²ü¸É§Å ¦¿ÕôÒîÍŨà ¨ÅòÐ ¯ûÇ£÷¸û\n" "´Õ «ÊôÀ¨¼ ¦¿ÕôÒîÍŨà Á¡üÈ¢/Ò¾¢¾¡¸ «¨ÁÔí¸û" #: ../../standalone/tinyfirewall_.c:82 msgid "" "Firewalling\n" "\n" "Click on Configure to set up a standard firewall" msgstr "" "¦¿ÕôÒîÍÅ÷\n" "\n" "´Õ «ÊôÀ¨¼ ¦¿ÕôÒîÍŨà «¨ÁÔí¸û" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "¯í¸û ¦Á¡Æ¢¨Âò §¾÷×î ¦ºö¸" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "¿¢ÚÅø Ũ¸¨Âò §¾÷×î ¦ºö¸" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "Åý¾ðÎ ¸ñÎÀ¢Êò¾ø" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "±Ä¢¨Â ÅÊŨÁÔí¸û" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "¯í¸û Å¢¨ºôÀĨ¸ þ¼ «¨Á¨Å §¾÷×î ¦ºöÔí¸û" #: ../../steps.pm_.c:19 msgid "Security" msgstr "À¡Ð¸¡ôÒ" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "§¸¡ôÀ¨Áô¨À «¨ÁÔí¸û" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Ÿ¢÷¸¨Ç ÅÊçðÎí¸û" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "¿¢ÚÅ §ÅñÊ ¦À¡¾¢¸¨Ç §¾÷×î ¦ºöÔí¸û" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "þÂì¸ò¨¾ ¿¢Ú×í¸û" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "ÀÂɨÃî §ºÕí¸û- þÐ Ó츢Âõ" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "ŨĨÁôÀ¡ì¸í¸¨Ç ÅÊŨÁÔí¸û" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "§º¨Å¸¨Ç ÅÊŨÁÔí¸û" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "ÐÅíÌ¿¢Ã¨Ä ¿¢Ú×í¸û" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "ÐÅí̾𨼠¯ÕÅ¡ìÌí¸û" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "X-³ ÅÊŨÁì¸×õ" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "þÂì¸ò¾¢üÌ §¾¨ÅÂ¡É ¿¢¸ú¿¢¨ÄôÀÎò¾ôÀð¼ ¦À¡¾¢¸¨Ç ¿¢Ú×¾ø" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "¿¢ÚÅø ¿¢Ã¨Ä Å¢ðÎ ¦ÅǢø" #: ../../tinyfirewall.pm_.c:9 msgid "" "tinyfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "¦¿ÕôÒ ÌÚïÍÅ÷ ÅÊŨÁôÒ\n" "\n" "þíÌ «Ç¢ì¸ôÀÎõ À¾¢ø¸û ¯í¸û ¸½¢½¢Â¢ý\n" "À¡Ð¸¡ôÒ º¡÷ó¾Ð. ¸Å½õ §¾¨Å\n" "¿£í¸û þó¾ ¿¢Ã¨Ä ±ô§À¡Ð §ÅñÎÁ¡É¡Öõ þÂì¸Ä¡õ\n" "." #: ../../tinyfirewall.pm_.c:14 msgid "" "We'll now ask you questions about which services you'd like to allow\n" "the Internet to connect to. Please think carefully about these\n" "questions, as your computer's security is important.\n" "\n" "Please, if you're not currently using one of these services, firewall\n" "it off. You can change this configuration anytime you like by\n" "re-running this application!" msgstr "" "¾ü§À¡Ð §¸ð¸ôÀÎõ §¸ûÅ¢¸ÙìÌ ¿ýÈ¡¸ ÀÊòÐ\n" "À¾¢ø «Ç¢ì¸×õ. þíÌ «Ç¢ì¸ôÀÎõ À¾¢ø¸û ¯í¸û ¸½¢½¢Â¢ý\n" "À¡Ð¸¡ôÒ º¡÷ó¾Ð. ¸Å½õ §¾¨Å\n" "\n" "¿£í¸û þó¾ ¿¢Ã¨Ä ±ô§À¡Ð §ÅñÎÁ¡É¡Öõ þÂì¸Ä¡õ\n" "." #: ../../tinyfirewall.pm_.c:21 msgid "" "Are you running a web server on this machine that you need the whole\n" "Internet to see? If you are running a webserver that only needs to be\n" "accessed by this machine, you can safely answer NO here.\n" "\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û web-þ¨½Â¾Çô ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" #: ../../tinyfirewall.pm_.c:26 msgid "" "Are you running a name server on this machine? If you didn't set one\n" "up to give away IP and zone information to the whole Internet, please\n" "answer no.\n" "\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û DNS ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" "\n" #: ../../tinyfirewall.pm_.c:31 msgid "" "Do you want to allow incoming Secure Shell (ssh) connections? This\n" "is a telnet-replacement that you might use to login. If you're using\n" "telnet now, you should definitely switch to ssh. telnet is not\n" "encrypted -- so some attackers can steal your password if you use\n" "it. ssh is encrypted and doesn't allow for this eavesdropping." msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û ssh - À¡Ð¸¡ôÀ¡É ¦¾¡¨Ä¢¨½ôÒ ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾¢ø\n" "¾ÅÈ¢ø¨Ä. ¬É¡ø ¿øÄ ¸¼×¡ü¸¨Çò §¾÷×î ¦ºöÂ×õ\n" ". ¬¾Ä¡ø ¬õ ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û" #: ../../tinyfirewall.pm_.c:36 msgid "" "Do you want to allow incoming telnet connections?\n" "This is horribly unsafe, as we explained in the previous screen. We\n" "strongly recommend answering No here and using ssh in place of\n" "telnet.\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û telnet - ¦¾¡¨Ä¢¨½ôÒ ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" "\n" #: ../../tinyfirewall.pm_.c:41 msgid "" "Are you running an FTP server here that you need accessible to the\n" "Internet? If you are, we strongly recommend that you only use it for\n" "Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" "attackers, since FTP also uses no encryption for transferring passwords.\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û FTP ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" "\n" #: ../../tinyfirewall.pm_.c:46 msgid "" "Are you running a mail server here? If you're sending you \n" "messages through pine, mutt or any other text-based mail client,\n" "you probably are. Otherwise, you should firewall this off.\n" "\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û Á¢ýÉïºø ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" "\n" #: ../../tinyfirewall.pm_.c:51 msgid "" "Are you running a POP or IMAP server here? This would\n" "be used to host non-web-based mail accounts for people via \n" "this machine.\n" "\n" msgstr "" "¦À¡ÐÅ¡¸ ¿£í¸û Á¢ýÉïºø ÀâÁ¡È¢¨Â Å£ðÊø ÀÂýÀÎò¾\n" "§¾¨Å¢ø¨Ä.¬¾Ä¡ø þø¨Ä ±ýÈ À¾¢¨Ä §¾÷×î\n" "¦ºöÔí¸û\n" "\n" #: ../../tinyfirewall.pm_.c:56 msgid "" "You appear to be running a 2.2 kernel. If your network IP\n" "is automatically set by a computer in your home or office \n" "(dynamically assigned), we need to allow for this. Is\n" "this the case?\n" msgstr "" "þ¨¾ ¿£í¸û À¡÷ò¾¡ø ¿£í¸û Á¢¸ô ¾ÅÈ¡É \n" "§¾÷× ¦ºöÐ þÕ츢ȣ÷¸û ±É \n" "«÷ò¾õ. ¯¼ÉÊ¡¸ ¸½¢½¢Â¢ø ¿øÄ §¾÷ÔûÇÅ÷ \n" "¯¾Å¢Ô¼É Á¡ñʧÃì Ä¢É쨅 ¿¢Ú×í¸û. «øÄÐ ¬ÃõÀò¾Ä¢ÕóÐ\n" "¦À¡Ú¨Á¡¸ §¾÷×î ¦ºöÐ Å¡Õí¸û. Å¡úòÐì¸û\n" #: ../../tinyfirewall.pm_.c:61 msgid "" "Is your computer getting time syncronized to another computer?\n" "Mostly, this is used by medium-large Unix/Linux organizations\n" "to synchronize time for logging and such. If you're not part\n" "of a larger office and haven't heard of this, you probably \n" "aren't." msgstr "" "¿£í¸û áüÚì¸Éì¸¡É ¸½¢½¢¸¨Ç ¨Åò¾¢Õó¾¡ø \n" "«Åü¨È ´Øí¸¡¸ þÂì¸ §¿Ãì¸ðÎôÀ¡Î\n" "Ó츢Âõ. ¿£í¸û Å£ðÊø þ¨½Âò¨¾ ÀÂýÀÎò¾\n" "þÐ ´ýÚõ §¾¨Å \n" "þø¨Ä" #: ../../tinyfirewall.pm_.c:66 msgid "" "Configuration complete. May we write these changes to disk?\n" "\n" "\n" "\n" msgstr "" "ÅÊŨÁôÒ ÓÊó¾Ð. þó¾ Á¡üÈí¸û Åý¾ðÊø §ºÁ¢ì¸ôÀ¼Ä¡Á¡?\n" "\n" "\n" "\n" #: ../../tinyfirewall.pm_.c:82 #, c-format msgid "Can't open %s: %s\n" msgstr "þ¨¾ ¾¢Èì¸ ÓÊÂÅ¢ø¨Ä%s: %s\n" #: ../../tinyfirewall.pm_.c:84 #, c-format msgid "Can't open %s for writing: %s\n" msgstr " %s þ¨¾ ¾¢Èì¸ ÓÊÂÅ¢ø¨Ä,%s þ¨¾ ±ØОü¸¡¸ ¾¢Èì¸ §ÅñÎõ\n" #: ../../tinyfirewall.pm_.c:178 msgid "No I don't need DHCP" msgstr "þø¨Ä, ±ÉìÌ DHCP §Åñ¼¡õ" #: ../../tinyfirewall.pm_.c:178 msgid "Yes I need DHCP" msgstr "¬õ, ±ÉìÌ DHCP §ÅñÎõ" #: ../../tinyfirewall.pm_.c:179 msgid "No I don't need NTP" msgstr "þø¨Ä, ±ÉìÌ §¿Ãì¸ðÎôÀ¡ðÎ ÀâÁ¡È¢ §Åñ¼¡õ- NTP" #: ../../tinyfirewall.pm_.c:179 msgid "Yes I need NTP" msgstr "¬õ, ±ÉìÌ §¿Ãì¸ðÎôÀ¡ðÎ ÀâÁ¡È¢ §ÅñÎõ- NTP" #: ../../tinyfirewall.pm_.c:180 ../../tinyfirewall.pm_.c:184 msgid "Don't Save" msgstr "§ºÁ¢ì¸¡§¾" #: ../../tinyfirewall.pm_.c:180 ../../tinyfirewall.pm_.c:184 #: ../../tinyfirewall.pm_.c:204 msgid "Save & Quit" msgstr "§ºÁ¢òÐÅ¢ðÎ ¦ÅÇ¢§ÂÚ" #: ../../tinyfirewall.pm_.c:195 ../../tinyfirewall.pm_.c:199 msgid "Firewall Configuration Wizard" msgstr "¦¿ÕôÒîÍÅ÷ ÅÊŨÁôÒ Á¡Â¡Å¢" #: ../../tinyfirewall.pm_.c:197 msgid "No (firewall this off from the internet)" msgstr "þø¨Ä(þ¾¨É ¦¿ÕôÒîÍÅ÷ ÅƢ¡¸ «ÛÁ¾¢ì¸¡§¾)" #: ../../tinyfirewall.pm_.c:198 msgid "Yes (allow this through the firewall)" msgstr "¬õ(þ¾¨É ¦¿ÕôÒîÍÅ÷ ÅƢ¡¸ «ÛÁ¾¢ì¸×õ)" #: ../../tinyfirewall.pm_.c:230 msgid "Please Wait... Verifying installed packages" msgstr "¾ÂצºöÐ ¸¡ò¾¢Õì¸×õ..¿¢ÚÅôÀðÎûÇ ¦À¡¾¢¸û §º¡¾¢ì¸ôÀθ¢ýÈÉ" #: ../../tinyfirewall.pm_.c:236 #, c-format msgid "" "Failure installing the needed packages : %s and Bastille.\n" " Try to install them manually." msgstr "" "%s ÁüÚõ À¡ŠÊø §À¡ýÈ º¢Ä ¦À¡¾¢¸¨Ç ¿¢Úמ¢ø À¢¨Æ §¿÷óÐûÇÐ\n" "¿£í¸û À¢ÈÌ ¿¢ÚŢ즸¡ûÙí¸û" #: ../../ugtk.pm_.c:619 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" "-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*-r-*" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "þ¨½Â¾Ç/§¸¡ôÒô À¡¢Á¡üÈõ" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "ŨĨÁôÒì ¸½¢½¢(§ÅñÊ)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS /ºõÀ¡/À¢É¡Á¢/ssh ÀâÁ¡È¢¸û" #: ../../share/compssUsers:999 msgid "Office" msgstr "«ÖÅø ¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "gº¡Çà §ÁÄ¡Ç÷" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "¯í¸û À¡õ/¨Åº¡÷ ¬¸¢Â ¨¸Â¡ð¸¨Ç ÀÂýÀÎò¾ ¯¾×í¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "§Å¨Äì¸Çõ" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "¦¿ÕôÒîÍÅ÷/ÅÆ¢ôÀÎò¾¢" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "«ÖÅø ¸ÕÅ¢¸û(Å¢¡¢¾¡û, ¿¢¸úò¾¢,ŨÃÀ¼ì ¸ÕÅ¢¸û)" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "þ¨º º¡÷ó¾ ¸ÕÅ¢¸û- mp3, Á¢Ê þÂ츢¸û" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "LSB- Ä¢ÉìŠ ¾Ãì¸ðÎôÀ¡ðÎìÌ §¾¨ÅÂ¡É ¿¢Ãø¸û." #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Òò¾¸í¸û ÁüÚõ ±ôÀÊî ¦ºöÅÐ §À¡ýÈ ¯¾Å¢ áø" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "K ŨÃÅ¢ÂøÅÆ¢ º¡Çà §ÁÄ¡Ç÷¸û" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "g,i,e ¬¸¢Â ÀÂýÀÎòОüÌ ±Ç¢¾¡É ŨÃÅ¢ÂøÅÆ¢ §ÁÄ¡Ç÷¸û" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Àø漸õ-´Ç¢ò§¾¡üÈõ" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "Á¢ýÉïºø, ¦ºö¾¢Âïºø, §¸¡ôÒô À¡¢Á¡üÈõ ¬¸¢ÂÅüÚìÌ ¯¾×í¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Database" msgstr "¾Ã×ò¾Çí¸û" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL/MySQL ¾Ã×ò¾Ç ÀâÁ¡È¢¸û" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "¯í¸û ¸½¢½¢¨Â ±Ç¢¾¡¸ ÅÊŨÁì¸ ¯¾×í¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Àø漸õ-µÄ¢" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "¯¾Å¢áø" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Ó¨ÉÂì ¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Á¢ýÉïºø ÀâÁ¡È¢" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "þ¨½Âì ¸½¢½¢" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Àø漸 ¸½¢½¢" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "ÅÊŨÁôÒ¸û" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "§ÁÖõ ÀÄ Å¨ÃÅ¢ÂøÅÆ¢ ÝÆø¸û[i, g §À¡ýȨÅ]" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "Kº¡ÇçÁÄ¡Ç÷- µ÷ ÀÂýÀÎòОüÌ ±Ç¢¾¡É ŨÃÅ¢ÂøÅÆ¢ §ÁÄ¡Ç÷" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "ŨÃÅ¢ÂøÅÆ¢ ÝÆø¸û" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "«ôÀ¡îº¢, ftpd §À¡ýÈ ÀâÁ¡üÚ ¿¢Ãø¸û" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "º¢Ê ¯ÕÅ¡ì¸/±Ã¢ì¸ ¯¾×í¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "«ÖÅø ¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "g, e, i §À¡ýÈ º¡Çà §ÁÄ¡Ç÷¸û" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "gŨÃÅ¢Âø §À¡ýÈ ¿¢Ãø¸û" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C ÁüÚõ C++ áĸ ¿¢Ãø¸û" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "ŨĨÁôÀ¸ ÀâÁ¡È¢" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "Á¢ýÉïºø/¦ºö¾¢Âïºø" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Å¢¨Ç¡ðθû" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "´Ç¢ò§¾¡üÈ þÂ츢¸û/¦¾¡ÌôÀ¡ý¸û" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Àø漸õ-ŨÃÅ¢Âø" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Å¢¨Ç¡ðθû" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "¿£í¸û Á¢ýÉïºø, ÁüÚõ þ¨½Âò¨¾ §Á§Ä¡¼ ¯¾×í¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "¯í¸û ¦º¡ó¾¸Éì̸¨Ç ºÃ¢À¡÷ì¸" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "µ÷ ÀÂýÀÎòОüÌ ±Ç¢¾¡É ŨÃÅ¢ÂøÅÆ¢ §ÁÄ¡Ç÷" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "ssh ӾĢ ŨĨÁôÒì ¸ÕÅ¢¸û" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "þ¨½Â ѨÆš¢ø" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Àø漸 þÂ츢¸û/¯ÕÅ¡ì¸ ¿¢Ãø¸û" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "ÁüÈ Å¨ÃÅ¢ÂøÅÆ¢ §ÁÄ¡Ç÷¸û" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Ó¨ÉÂõ,¦¾¡ÌôÀ¡Ç÷¸û, §¸¡ôÒ §ÁÄ¡Ç÷¸û ÁüÚõ µÎ¸û" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "¯í¸û ÅÃצºÄ× Å¢ÅÃí¸¨Ç þó¾ ¿¢Ãø¸û ãÄõ §ÀÉÄ¡õ" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "¨¸Â¡û ¦ºÂø §ÁÄ¡Ç÷" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Àø漸-º¢Ê ±Ã¢ò¾ø" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "«È¢Å¢Âø À½¢¿¢¨ÄÂõ"