# Translation file of Mandrake graphic install # Copyright (c) 2000 MandrakeSoft # Florin Grad , 1999-2000 # Dragos Marian Barbu , 2000 # Ovidiu Constantin , 2002, 2003 # Harald Ersch ,2003 # msgid "" msgstr "" "Project-Id-Version: DrakX 7.1\n" "POT-Creation-Date: 2003-05-16 14:13+0200\n" "PO-Revision-Date: 2003-03-15 22:22+0200\n" "Last-Translator: Ovidiu Constantin \n" "Language-Team: Romanian Translators for Free Software \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-2\n" "Content-Transfer-Encoding: 8bit\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "Port Imprimantă de rețea" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "Introduceți discheta :" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Tabelul de partiții salvat nu are aceeași mărime\n" "Să continui totuși ?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "Numele utilizatorului" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Ce tip de intrări doriți să adăugați ?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "Restaurează tabelul de partiții" #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Configurație post-install" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Folosește ``%s'' în loc" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Tip" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Imprimantele\n" "\n" "%s%s\n" "sunt conectate direct la sistemul dvs." #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Republica centr-africană" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Periferic gateway" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "Plăci Ethernet" #: ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Parametri" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "Auto-detecție" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Interfață:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Alegeți tipul de instalare" #: ../../standalone/drakbackup:1 #, c-format msgid "on CDROM" msgstr "pe CDROM" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Sistemul dvs. nu pare a fi conectat la Internet.\n" "Încercați să reconfigurați conexiunea." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Belarus" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Eroare la scrierea în fișierul %s" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd e folosit pentru a monitoriza bateria și login-ul via syslog.\n" "Poate de asemenea fi folosit pentru oprirea calculatorului dacă bateria e\n" "slabă." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Următoarele pachetele vor instalate" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "Configurare CUPS" #: ../../lang.pm:1 #, c-format msgid "Hong Kong" msgstr "Hong Kong" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Spațiu pe disc insuficient pentru alocarea de noi partiții" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "În mutare" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Liban" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "Oprește" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "Editare gazdă selectată" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "Bulgară (fonetic)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "IP de inceput pt. DHCP" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 kB" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Opțiunile principale ale gestionarului de demaraj" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "Unități de bandă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "Scanare rețea..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Malaezia" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Elvețian (dispunere francezâ)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid a eșuat (poate vă lipsesc raidtools?)" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "Webcam-uri" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "size of the (second level) cpu cache" msgstr "Dimensiune cache procesor (nivel doi)" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "Plăci de sunet" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Nivel %s\n" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Luxemburg" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "Iran" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Magistrală" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Irak" #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Configurez..." #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, and it's currently enabled." msgstr "Configurarea a fost făcută deja, acum este activată." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Parola (din nou)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "Caută fonturi instalate" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Venezuela" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "Adresă IP" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Alegeți mărimile" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Alegeți o altă partiție" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "Utilizator curent" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "Nume utilizator" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "Tasta \"Windows\" stânga" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "Configurare server DHCPd" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Guyana" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Elimină un modul" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Parola" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (max, inactive=-1)\n" "\n" "Set password aging to \\fImax\\fP days and delay to change to \\fIinactive" "\\fP." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "Configurare avansată" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Root" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Alegeți un RAID existent la care să adăugați" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Turcă (model \"Q\" modern)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "nu găsesc mesajul LILO" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Regenerarea automata a antetelor nucleu în /boot pentru\n" "/usr/include/linux/{autoconf, versiune}.h" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "Dacă este necesar" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "Restaurare eșuată..." #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jazz drives" msgstr "/Auto-detecție unități _JAZZ" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backups will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbackup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "Configurație interfață curentă" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "Forțează nefolosirea APIC" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Această parolă e prea simplă (ar trebui să fie de cel puțin %d caractere)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "[Tastatură]" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "Listă instalare" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "Schimbă calea\n" "de restaurare" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "Afișează numai pentru ziua selectată" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t#type fat;\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 kB" #: ../../standalone/net_monitor:1 #, c-format msgid "Logs" msgstr "Jurnale" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Notă: Porturile paralele nu au putut fi auto-detectate)" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Ce fel de placă aveți?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Securitate" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "Necunoscut" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Configurația rețelei" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "Notificare" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Activate/Disable daily security check." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable crontab and at for users. Put allowed users in /etc/cron." "allow and /etc/at.allow\n" "(see man at(1) and crontab(1))." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Ce tip de partiționare?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "Interfață" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Options Description:\n" "\n" " - Backup System Files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User Files: \n" "\n" "\tThis option allows you select all users that you want to \n" "\tbackup. To preserve disk space, it is recommended that\n" "\tyou do not include the web browser's cache.\n" "\n" " - Backup Other Files: \n" "\n" "\tThis option allows you to include additional data to save.\n" "\tIf you want to add individual files, select them from the\n" "\trighthand 'Files' list pane. To add directories, enter the \n" "\tdirectory by clicking on it in the lefthand 'Folders' pane, \n" "\tand at that point click 'OK' without selecting any files.\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful option for \n" "\tbackup. This option allows you to backup all your data \n" "\tthe first time, and only the changed data afterward.\n" "\tThen you will be able, during the restore step, to restore \n" "\tyour data from a specified date. If you have not selected \n" "\tthis option all old backups are deleted before each backup. \n" "\n" " - Differential Backups:\n" " \n" "\tThe differential backup, rather than comparing changes in the\n" "\tdata to the previous incremental backup, always compares the\n" "\tdata to the initial base backup. This method allows one to\n" "\trestore the base and then the differential from a certain date.\n" "\n" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, expr='*.*', dev='tty12')\n" "\n" "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n" "expression describing what to log (see syslog.conf(5) for more details) and\n" "dev the device to report the log." msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "șiruri separate prin virgulă" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Acestea sunt mașinile de pe care vor fi folosite scannerele:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "Mesaje" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "Server POPși IMAP" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Mexic" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "Pasul modelului" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Ruanda" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Aveți vreo interfață %s ?" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Elveția" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Opțiuni pentru imprimanta lpd la distanță" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Configurează acessul la Internet..." #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Norvegia" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Daneză" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Vă rog să introduceți configurația IP pentru acest calculator.\n" "Fiecare rubrică va trebui să fie completată ca o adresă IP în format\n" "zecimal-punctat (de exemplu 192.168.1.55)." #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "Procesoare" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Bulgaria" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "Nu e selectată nici o interfață de rețea!" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Insulele Svalbard și Jan Mayen" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "partiția %s este cunoscută acum ca %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "Backup fișiere diverse..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "Adresa IP a serverului SMB" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Tabelul de partiții al perifericului %s va fi scris pe disc!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "Instalare pachete HPOJ..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "O dischetă personalizată de demaraj permite un mod de a accede la sistemul\n" "vostru Linux fără a depinde de gestionarul de demaraj normal. Acesta este \n" "util dacă nu doriți să instalați LILO (sau grub) în sistem sau dacâ alte \n" "sisteme șterg LILO sau dacă LILO nu funcționează în sistemul dumneavoastră.\n" "O dischetă personalizată poate fi de asemena folosită ca o imagine de\n" "depanaj, ceea ce permite recuperări mult mai ușoare în urmă unor pane " "severe.\n" "Doriți să creați o dischetă de demaraj pentru sistemul dumneavoastră ?\n" "%s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer \\#%s" msgstr ", imprimantă USB \\#%s" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Letonă" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "lunar" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Nume modul" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "Pornire la demaraj" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Primul sector al discului (MBR)" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "Joystick-uri" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "El Salvador" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "Folosește implicit Unicode " #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "modulul nucleului GNU/Linux ce va controla dispozitivul" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Încerc să refac tabelul de partiții" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Nu pot porni actualizarea în direct!!!\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Nume: " #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 milioane de culori (24 biți)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "Permite tuturor utilizatorilor" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "Magazinul oficial MandrakeSoft" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Redimensionare" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Conexiune pe cablu" #: ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "Utilizator" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Nu pot citi tabela de partiții a dispozitivului %s, este prea stricată " "pentru mine:(\n" "Pot încerca să continui, ștergând toate partițiile greșite (TOATE DATELE se " "vor pierde!).\n" "Cealată soluție ar fi să nu permit modificarea tabelei de partiții.\n" "(eroarea este %s)\n" "\n" "Sunteți de acord să pierdeți toate partițiile?\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port \\#%s" msgstr "Imprimantă pe portul paralel \\#%s" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "Nume" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid a eșuat" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Emulare buton 3" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "Trimit fișierele..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Izraeliană (fonetic)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "acces la uneltele rpm" #: ../../standalone/drakperm:1 #, c-format msgid "edit" msgstr "editare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Număr de telefon " #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Eroare: Pilotul \"%s\" pentru placa dvs. de sunet nu este în listă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "Statele unite (eter)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose the\n" "media for backup." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Folosește extensia Xinerama" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk: \n" " %s \n" " %s" msgstr "" "Nu pot termina corespunzător mkbootdisk: %s\n" " %s" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "Europa de vest" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "HardDrake 2 versiunea %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "Copiez %s" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "Alegeți culoarea" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Republica Dominicană" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Swaziland" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "Set-UID" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you are using CDRW media" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "Alegeți discul fix pe care doriți să îl ștergeți complet pentru a instala " "noua\n" "partiție Makdrake Linux. Aveți grijă, toate datele existente pe el se vor " "pierde\n" "și nu vor putea fi recuperate!" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port \\#%s" msgstr " pe portul paralel \\#%s" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Folositi tastele %c si %c pentru selectarea intrarii puse in evidenta." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Maus comun cu 2 butoane" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Șterge întâi volumele logice\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Intrarea selectata va demara automat dupa %d secunde" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "Nu pot scrie /etc/sysconfig/bootsplash\n" "Nu găsesc fișierul." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Acces la Internet" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Activez serverele..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Imprimarea pagin(ei/lor) de test" #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Există deja o partiție cu punctul de montare %s!\n" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Ucraina" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "Aplicație:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Modem ISDN extern" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Ce alegeți? (din oficiu %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "Depanare" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid " / Region" msgstr "Reunion" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Pagin(a/ile) de test a/au fost trimisă la imprimantă.\n" "Aceasta va dura puțin timp înaintea pornirii imprimării\n" "Starea tipăririi:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "zilnic" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "și o imprimantă necunoscută" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "Irlanda" #: ../../standalone/drakfloppy:1 #, c-format msgid "kernel version" msgstr "Versiune nucleu" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " Restaurează configurația " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "Configurația este corectă?" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "Configurare asistent" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Autosondare" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Nu pot să folosesc difuziunea fără nici un domeniu NIS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "Șterg imprimanta \"%s\"..." #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Peru" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Șterge Windows(TM)" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "Pornește serverul de fonturi X (obligatoriu pentru rularea XFree)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Majoritatea valorilor au fost extrase din\n" "sistemul dvs. funcțional. Le puteți schimba corespunzător." #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Madagascar" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "Sistem" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "Vreți să folosiți această facilitate?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "Parolă necesară" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d minute" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Placă grafică: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Configurare XFree" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Alegeți acțiunea" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Polinezia franceză" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Lansează sistemul de sunet ALSA (Advanced Linux Sound Architecture)" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Instalarea driverului pentru placa %s - %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "Activare Server" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Ucrainiană" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Introduceți discheta de pornire (de Boot) folosită în perifericul %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "Rețele locale" #: ../../help.pm:1 #, fuzzy, c-format msgid "Remove Windows" msgstr "Șterge Windows(TM)" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "Scannerul dvs. %s a fost configurat.\n" "Acum puteți scana documente folosind \"XSane\" din meniul de aplicații " "Multimedia/Grafică." #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "După ce ați configurat parametrii generali pt. gestionarul de demarare, va " "fi afișată \n" "lista opțiunilor de demaraj ce va fi disponibilă la momentul demarării\n" "\n" "Dacă există alte sisteme de operare instalate deja,\n" "ele vor fi adăugate automat la meniul de demarare.\n" "Puteți ajusta opțiunile existente selectând o intrare și clic pe \n" "\"Modificare\" sau \"Ștergere\". \"OK\" validează schimbările.\n" "\n" "\n" "Puteți de asemenea să interziceți accesul la aceste sisteme a utilizatorilor " "neautorizați,\n" "caz în care ar trebui să ștergeți intrările acestor sisteme din meniul de " "demarare.\n" "În acest ultim caz însă, veți avea nevoie de un floppy de demarare pentru\n" "a putea le demara!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Mod sistem" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Pentru a tipări pe o imprimantă NetWare, trebuie să furnizați\n" "numele serverului NetWare (nu e întotdeauna același cu cel TCP/IP)\n" "cît și numele listei de așteptare și eventual utilizatorii care vor avea\n" "access și parolele." #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Mască de rețea:" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Adaugă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "Vă rog să alegeți dispunerea tastaturii." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Bazat-pe-un-terminal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "Numele de utilizator este prea lung" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Alt SO (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Citesc baza de date a imprimantelor..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Generare dischetă de autoinstalare" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Somalia" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "Nu există pilot open-source" #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Avem funcționalitățile nivelului anterior de securitate, dar acum sistemul e " "complet închis și securitatea e la maximum." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Nicaragua" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Noua Caledonie" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "Protocol European (EDSS1)" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Mod video" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "Vă rog să introduceți mai jos adresa dvs. de email " #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Oman" #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "Monitorizare rețea" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Noua mărime în MB: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Tip tabelă de partiții: %s\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "Autentificare în domeniu Windows" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "Tastatura US" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Emulare butoane" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "Viteză transmisie:" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Eroare tip halt" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "Configurare alertare prin email" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Tokelau" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "Ediția:" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Viteză conexiune" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Namibia" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "Server de baze de date" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Nu pot adăuga partiția la md%d _formatat_RAID" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Placa dvs. poate avea accelerare 3D hardware, dar numai cu XFree %s,\n" "ACEST SUPORT ESTE EXPERIMENTAL ȘI POATE BLOCA SISTEMUL DVS!Placa dvs. este " "utilizabilă cu XFree %s ce are un suport mai bun în 2D." #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "Vă rog să așteptați, configurez opțiunile de securitate..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Lansează mediul grafic la pornirea sistemului dvs." #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "orar" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua și Barbuda" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Spaniol" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "Pornește" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "Configurez aplicațiile..." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Conexiune prin modem normal" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "Selectare fișiere" #: ../../network/isdn.pm:1 #, c-format msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "Execută unealta de configurare" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Instalarea gestionarului de demarare" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Mărimea partiției root în MB:" #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Acesta este un pachet indispensabil și nu poate fi deselectat" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "Imaginea ISO pt. EtherBoot este %s" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) este un server de nume de domeniu (DNS) folosit la rezolvarea " "asocierii numelor cu adresele IP." #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Deconectare..." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Saint Lucia" #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "Raport" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Palau" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "nivel" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Selectarea grupurilor de pachete" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Restaurează prin protocolul de rețea: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "Aici puteți configura fiecare parametru al modulului." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Alegeți rezoluția și adâncimea de culoare" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "Emulare 3 Butoane?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Nu se poate creea o nouă partiție\n" "(de vreme ce s-a atins numărul maxim de partiții primare).\n" "Întâi ștergeți o partiție primară și creeați o partiție extinsă." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Montare" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "Creare dischetă de autoinstalare" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "Instalare actualizări pt. sistem" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Stare" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Asigurați-vă că există mediu (disketă) în dispozitivul: %s" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Activează profilurile multiple" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Imprimantă locală" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "Fișiere restaurate..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Selectare pachete" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Mauritania" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Toate partițiile principale sunt alocate" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Detecția și configurarea automată a echipamentelor la demaraj." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "Configurare server de instalare" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "Configurația IDE" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "Funcționalitatea rețelei nu este configurată" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "Configurare module" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Insulele Cocos (Keeling)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from the Internet " msgstr "Deconectare de la Internet" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" "Va trebui să redemarați pentru ca schimbările sa fie luate în considerare" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Număr de telefon pt. furnizor" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "Nume gazdă %s" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Armenia" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Fiji" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (length, ndigits=0, nupper=0)\n" "\n" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Al doilea periferic de dischetă" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "Despre HardDrake" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "Capacitate unitate" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Introduceți o dischetă în unitate\n" "Toate datele de pe această dischetă se vor pierde" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Mărimea: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Tastele Ctrl și Shift simultan" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "secundar" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Nici o parolă" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Nigeria" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Nu există partiții utilizabile" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Următoarele scannere\n" "\n" "%s\n" "sunt disponibile pe sistemul dvs.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "Informații despre discurile fixe" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Rus" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "Iordania" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "Ascunde fișiere" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Autodetectare imprimante conectate direct la această mașină" #: ../../standalone/drakxtv:1 #, c-format msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Îmi pare rău dar nu găsesc nici un periferic de dischetă disponibil." #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Bolivia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Pachet defectuos" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "Transformați masina dumneavoastră într-un server Linux puternic: Server Web, " "poștă, firewall, router, servicii de fișiere și imprimare (etc.) sunt doar " "la câteva clicuri depărtare!" #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "Opțiuni de bază DrakSec" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Notă: dacă aveți o placă de sunet ISA PnP, trebuie să folosiți programul " "sndconfig. Tastați \"sndconfig\" într-o consolă. " #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "România :-)" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "Alegeți dispozitivul" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Canada" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Șterge din LVM" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Zona de timp" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "German" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "Next ->" msgstr "Următorul ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Sunt șanse ca această partiție\n" "să fie una cu drivere, probabil\n" "ar trebui lăsată în pace.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Guineea-Bissau" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Rata de actualizare orizontală" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Nu pot să desființez acest punct de montare pentru că partiția e folosită " "pentru loopback.\n" "Ștergeți loopback-ul mai întâi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "Controllere USB" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "Ce normă folosește TV-ul dumneavoastră?" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Tip: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Numele de access" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "Activează" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Contactez situl Mandrake Linux pentru obținerea listei oglinzilor " "disponibile..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "O problemă a avut loc la restartarea rețelei: \n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Doriți ștergerea fișierului loopback?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "Vă rog să alegeți țara" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Samoa" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Protocolul rstat permite utilizatorilor unei rețele să recupereze\n" "performanțele măsurate de la orice calculator de pe rețea." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Re-generez lista de scannere configurate ..." #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "Scannere" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Atenție: testul plăcii grafice poate bloca sistemul dvs." #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Numele utilizatorului trebuie sa conțină numai caractere minuscule, numere, " "`-' și `_'" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Bun venit Piraților" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Opțiuni pentru module:" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "Asigurați-vă rețeaua cu Firewall-ul Multi Rețea" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "Continuă cu configurarea rețelei" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Abandonează" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you want to use the non-rewinding device." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "Folosirea scannerelor de la distanță" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CDROM.\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norvegiană)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Nu pot executa fork: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Tip: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- Editare client" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "Nu am găsit nici un font" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Maus" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "nu e destul spațiu în /boot" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitratry driver" msgstr "Alegere arbitrară pilot" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Nume gazdă" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Adaugă la RAID" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "Nici o unitate de dischetă nu este disponibilă!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Continuați totuși?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Imprimantă" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Arabia saudită" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "Internet" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "Au fost adăugate câteva dispozitive:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "Restaurează de pe bandă" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Alegeți profilul ce va fi configurat" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Punctele de montare au trebui să conțină doar caractere alfanumerice" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (name)\n" "\n" "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Vezi info hardware" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Primul sector al partiției de demaraj" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "Mască subrețea:" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successfull" msgstr "Instalare cu succes a temelor lilo și Imagine de la demaraj" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Cei doi parametri critici sunt rata de actualizare verticală, care este " "rata\n" "la care întregul ecran e actualizat și mai important rata de sincronizare\n" "orizontală, care este rata la care liniile de scan sunt afișate.\n" "Este FOARTE IMPORTANT să nu specificați un tip de monitor cu interval de\n" "sincronizare care depășește capabilitățile monitorului vostru: puteți\n" "distruge monitorul în acest fel.\n" "Dacă nu sunteți sigur, alegeți parametri conservativi." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Modifică" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "nou" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "Doriți să încercați din nou?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Asistent" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "Editare server selectat" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Trebuie să redemarați pentru a înregistra modificările tabelei de partiții" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Vă rog să alegeți dispunerea tastaturii." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Standard" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Vă rog să alegeți tipul de mouse." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "Conectare..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Nu am putut configura imprimanta \"%s\"!" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "neconfigurat" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "Despre" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Configurare Proxy-uri" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Start: sector %s\n" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "Interfața de rețea este deja configurată" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "Nu pot accesa discheta!" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "Server mail" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Vă rog faceți clic pe o partiție" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "Vă urez o zi bună!" #: ../../standalone/drakbackup:1 #, c-format msgid "across Network" msgstr "peste rețea" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "Actualizare %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Selectați Conexiunea de imprimantă" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Scanarea canalelor TV este în progres..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Super-procesul Internet (numit în mod normal inetd) demarează o sumedenie\n" "de servicii, incluzînd telnet, ftp, rsh și rlogin. Dezactivarea lui telnet\n" "dezactivează toate serviciile de care e responsabil." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Argentina" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "Server nume de domeniu" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "Nivel de securitate:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Punctele de montare trebuie sa înceapă cu un /" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "Server de mail Postfix" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Ieșire fără a înregistra" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Yemen" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "Acest produs este disponibil pe situl Web MandrakeStore." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Detecția discului fix" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Vă rog să introduceți URL-ul pentru serverul WebDAV" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Tadjikistan" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Acceptă" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Description" msgstr "Descriere" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Eroare la citirea %s pentru a scrie: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Tip de mouse: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Placa dvs. poate avea suport pentru accelerarea 3D hardware cu XFree %s." #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose your CD/DVD media size (Mb)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Expert Area" msgstr "Zonă expert" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Alegeți un monitor" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Eticheta goală nu e permisă" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Imposibil de adăugat o alta partiție" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Mărimea în MB: " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Imprimantă la distanță" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "Vă rog să alegeți limba folosită." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Pot să configurez calculatorul să facă logare automată pt. un utilizator." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "Formatează discheta" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register enforce write proctection at the memory page " "level, thus enabling the processor to prevent kernel accesses)" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "Imprimante generice" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Scanerele de pe această mașină sunt disponibile altor calculatoare" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "Primul sector al partiției root" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "Drivere alternative" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Cape Verde" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "Dacă acest procesor are eroare tip Cyrix 6x86 Coma" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "Primele Pentium-uri aveau erori și se blocau la decodarea secvenței F0 0F" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Guam" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Opțiuni/Testează" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Va trebui să folosiți acest nivel cu grijă. Aceasta face ca sistemul să fie\n" "mai ușor de folosit, dar foarte sensibil: nu trebuie să fie folosit pentru " "un\n" "calculator conectat cu altele de pe Internet. Nu există nici o parolă de " "acces." #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "Montez partiția %s" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Numele utilizatorului" #: ../../network/isdn.pm:1 #, c-format msgid "New configuration (isdn-light)" msgstr "Configurație nouă (isdn-light)" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Ce partiție doriți să folosiți pentru a instala Linux4Win?" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Pagini de test" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "Verific %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Memorie placă (DMA)" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Franța" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "navighează" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Turcia" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "Număr butoane" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Module" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "Echipamente" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Tastele Ctrl și Alt simultan" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Statele Unite" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Sistem de operare implicit?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Elvețian (dispunere germanâ)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Configurează toate capetele (ieșirile) independent" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "Server NTP" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "Încarcă/Înregistrează (de) pe dischetă" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "simpatic: " #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "terminare în %d secunde" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Pe ce port serial este conectat modemul dumneavoastră?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country" msgstr "Țara" #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "Proprietate" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "Configurare LAN" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Ghana" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "Cale sau modul necesar" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "Opțiuni avansate" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "Eroare tip Coma" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "A fost o eroare la instalarea pachetelor:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Anulează" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Scrie tabelul de partiții" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Finlandez" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Macedonia" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Partajarea per-utilizator folosește grupul \"fileshare\".\n" "Puteți folosi userdrake pentru adăuga un utilizator la acest grup." #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Slovenă" #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "Libia" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Configurare script-uri, instalare programe, pornire servere..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Tabel" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Nu știu cum să formatez %s în tipul %s" #: ../../standalone/harddrake2:1 #, c-format msgid "Model" msgstr "Model" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "Oprire Server" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" "\n" "Selectați tema pt.\n" "lilo și imaginea,\n" "le puteți alege\n" "separat." #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "Modem-uri" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, listen_tcp=None)\n" "\n" "Allow/Forbid X connections. First arg specifies what is done\n" "on the client side: ALL (all connections are allowed), LOCAL (only\n" "local connection) and NONE (no connection)." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Folosește autodetecția" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM adaugă suport mouse la aplicații text Linux ca Midnight Commander.\n" "El permite de asemenea operații cu mouse-ul de copiere/lipire și include\n" "suportul meniurilor contextuale în consolă." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Pornit la demaraj" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "Următoarele opțiuni pot fi alese pentru particularizarea\n" "sistemului dvs. de securitate. Pentru explicații, clic pe Ajutor.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Căutare automată imprimante disponibile pe mașinile la distanță" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Timorul de est" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "Șterge profile..." #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Vă rog delogați-vă și folosiți Ctrl-Alt-BackSpace" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "detectat" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Rețeaua trebuie repornită. Doriți să o repornesc?" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "Pachet:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "Nu pot scrie fișierul /etc/sysconfig/bootsplash." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "AVERTIZARE DE SECURITATE!" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Nu, nu vreau autologare" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "Unealta de migrare Windows" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "Toate limbile" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "Șterg %s" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Testez conexiunea dvs..." #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "Mărime cache " #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Parolele sunt acum activate, dar utilizarea lui ca un calculator într-o " "rețea tot nu recomandată." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Sector de început: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pachetul %s trebuie instalat. Doriți să îl instalez?" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Seychelles" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "Parola eronată la %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Zambia" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "Administrator de securitate (logare sau email)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "Regret, suportul este numai pt. nucleu-e 2.4" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "Românească (qwerty)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Republica Cehă" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Egipt" #: ../../network/isdn.pm:1 #, c-format msgid "Old configuration (isdn4net)" msgstr "Configurație veche (isdn4net)" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Placă de sunet" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "Import fonturi" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Aveți o singură partiție mare Microsoft Dos/Windows).\n" "Va sugerez să redimensionați mai întîi acea partiție\n" "faceți clic pe ea și apoi pe \"Redimensionează\")" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "Elimină fișierele temporare" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Schimbă tipul partiției" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "Opțiuni rețea" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Afișează tema\n" "sub consolă" #: ../../standalone/net_monitor:1 #, c-format msgid "Statistics" msgstr "Statistici" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(pe %s)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM Series" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "O bibliotecă ce protejează contra atacurilor tip buffer overflow și format " "string." #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "medie" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "Nume imprimantă nouă" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Guineea ecuatorială" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid autologin." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "Românească (qwertz)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "Scrie configurație" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Serviciul de rutare permite actualizarea automată a tabelei IP de rutare\n" "via\n" " protocolul RIP. În timp de RIP este folosit pentru rețele mici,\n" "alte protocoale mai complexe sunt folosite pentru rețele mai complexe." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Kiribati" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid remote root login." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "Navighează" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "Unități CDROM" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Doriți să încerc conectarea la Internet acum?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Belgian" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "Aveți o placă de sunet ISA?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Nu a fost detectat nici un adaptor de rețea ethernet pe sistemul " "dumneavoastră.\n" "Nu pot configura acest tip de conexiune." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "Window$" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Nu pot captura ecranul înainte de partiționare" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "Nume gazdă" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Fișier/S_alvează ca..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s nu este în baza de date de scannere, configurați manual?" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Timp de așteptare înaintea demarării imaginii standard" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Limitează opțiunile liniei de comandă" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "Europa de est" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Folosește spațiul liber" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "Folosește DHCP" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "Alertare prin email" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Configurație Internet" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Uzbekistan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "Am detectat %s" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "/Auto-detecție im_primante" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Finalizare" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "Indicatorii procesorului raportați de nucleu" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Togo" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 MB" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Încercați din nou" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "Modelul este corect" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Redimensionarea FAT a eșuat: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Selectare individuală a pachetelor" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "Dimensiunea acestei partiții nu poate fi modificată" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Location" msgstr "Locație" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "Statele unite (cablu-hrc)" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Sistem de fișiere jurnalizat" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Guatemala" #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "(pe această mașină)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Litera perifericului DOS: %s (doar o presupunere)\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Bahrain" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "Omite modulele scsi" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "Familia procesorului (ex. 6 pt. clasa i686)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Pentru că faceți o instalare prin rețea, rețeaua dumneavoastră este deja " "configurată.\n" "Apăsați Ok pentru a păstra configurația, sau Anulare pentru a reconfigura " "conexiune la Internet și rețeaua.\n" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tastatura: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Montează și demontează toate punctele de montare a Fișierelor sistem de " "Rețea\n" "(NFS), SMB (LanManager/Windows și NCP (NetWare)." #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "Plăci TV" #: ../../help.pm:1 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "Trece în mod normal" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Dimensiune" #: ../../help.pm:1 #, fuzzy, c-format msgid "GRUB" msgstr "GB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Groenlanda" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "Șterge toate NBI-urile" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Ce tip de configurare doriți să aveți pt. XFree?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Mai multe" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Cu acest nivel de securitate, utilizarea acestui calculator ca server\n" "devine posibilă. Securitatea este destul de ridicată pentru a folosi acest\n" "sistem ca server care acceptă conexiuni de la mulți clienți. Notă: dacă " "mașina este numai un client simplu la Internet, folosiți un nivel mai scăzut." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Parola pt. cont" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Ați decis să instalați gestionarul de demarare într-o partiție.\n" "Aceasta înseamă că aveți instalat deja un gestionar de demarare pe unitatea " "de disc de pe care demarați (ex. System Commander).\n" "\n" "De pe ce unitate de disc demarați?" #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "Tastatură Tadjică" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "Listă fonturi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Selectează fișierul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Japonia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "Listă opțiuni tipărire" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "Modificarea a fost făcută, dar pentru a intra în vigoare trebuie să vă " "delogați" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "Caută servere" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom etichetat \"%s\"" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Salvează și restaurează entropia sistemului pentru o mai mare calitate\n" "a generării de numere aleatoare." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../share/advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "Transformați calculatorul într-un server fiabil." #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (driver %s)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Fișier(e) loopback: \n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Nu știu" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", gazda TCP/IP \"%s\", port %s" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "Post-dezinstalare" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr " (" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "Nivel CPUid" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Adaugă un modul" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "Profile de șters:" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "Măsuri locale" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "Busmouse" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Cont: (nume utilizator)" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "Eroare tip FDIV" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Benin" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Uruguay" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "Selectare cale" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "Nume/adresă IP a gazdei:" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "Scanner-ul %s trebuie configurat de către PrinterDrake.\n" "Puteți lansa PrinterDrake în secțiunea Echipamente a Centrului de control " "Mandrake." #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "Japonia (cablu)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and your Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "Teste inițiale" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Continuă" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "Restaurare personalizată" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "Bazat-pe-un-script" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "hEroare la citirea fișierului %s" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "Configurare PLL :" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Trebuie să aveți o partiție FAT montată în /boot/efi" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL-ul trebuie să înceapă cu http:// sau https://" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Alt SO (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "Instalare/Actualizare" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d pachete" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "Se cere autentificare în domeniu" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Costa Rica" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "Folosește libsafe pentru servere" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "Islandeză" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Vă rog reconectați-vă ca %s pentru a activa schimbările" #: ../../my_gtk.pm:1 #, c-format msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "Mod LILO/Grub" #: ../../standalone/drakfloppy:1 #, c-format msgid "Output" msgstr "Ieșire" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Montări circulare %s\n" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Martinica" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "un număr" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Suedez" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Care driver %s să încerc?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Veți fi anunțați dacă unul din serviciile selectate nu mai rulează" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Tipul de fișiere sistem: " #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Insulele Mariane de nord" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "nici unul" #: ../../standalone/drakperm:1 #, c-format msgid "user :" msgstr "Utilizator :" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter your password" msgstr "Vă rog să introduceți parola" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "Unități de dischete" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you want to erase your RW media (1st Session)" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "Referință Ghostscript" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "Gestionar de demarare" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Mută" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "Gestionarul de demarare folosit" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "Numele serverului SMB" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "Servere de nume:" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 miliarde de culori (32 biți)" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Micronezia" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "A apărut o eroare - nu am găsit nici un periferic bun pentru a instala " "sisteme de fișiere noi. Verificați echipamentele pentru a detecta cauza " "acestei probleme." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Doriți să pornesc conectarea la demaraj?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "ID Procesor" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "Depanare sunet" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Poloneză (dispunere qwerty)" #: ../../standalone/drakconnect:1 #, c-format msgid "activate now" msgstr "Activează acum" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Această partiție nu poate fi folosită pentru loopback" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Fișierul există deja. Să-l folosesc ?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "recepționat: " #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "Tasta Alt dreapta" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "lista driverelor alternative pentru această placa de sunet" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Pasarelă" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "Partajare scannere" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Tonga" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Tunisia" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "Profil:" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Clic pe un dispozitiv din arborele din stânga pentru a-i afișa informațiile " "aici." #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV nu este instalat!" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "nume dispozitiv static vechi folosit în pachetul dev" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Această etichetă nu e permisă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "După formatarea partiției %s toate datele de pe aceasta partiție vor fi " "pierdute" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "Timp conectare:" #: ../../standalone/drakperm:1 #, c-format msgid "select perm file to see/edit" msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Introduceți CDROM-ul de instalare în unitate și apăsați OK când sunteți " "gata.\n" "Dacă nu îl aveți, apăsați Renunță pentru a evita actualizarea în direct." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Alegeți utilizatorul implicit:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Gabon" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrake Linux permite folosirea mai multor limbi.\n" "Selectați limbile pe care doriți să le instalați. Ele vor fi disponibile\n" "după terminarea instalării și repornirea sistemului." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "Domeniu" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Precizează cantintatea de RAM dacă e necesar (am găsit %d MB)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "DNS 2 furnizor (opțional)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Periferic de demaraj" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Care partiție doriți să o redimensionați?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Insulele minore de pe lângă SUA" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "Utilitar pentru monitorizarea jurnalelor" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Djibuti" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "detectat la portul %s" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Placă grafică: %s\n" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you are using a DVDRAM device" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "Selectare imagine de pornire" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Partițiile extended nu sunt suportate pe această platformă " #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "Configurare ISDN" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "Înaltă" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "Partajare conexiune la Internet" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Selectare fișier" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Avertisment! A fost detectată o configurație firewall existentă. Ar putea fi " "nevoie de unele ajustări manuale după instalare." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "Opțiuni implicite imprimantă" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Maus PS/2 comun cu rotiță" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Șterg imprimanta veche \"%s\"..." #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "Alegeți un dispozitiv!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "Șterge serverul selectat" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Teritoriile franceze de sud" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "nume dat de vânzător pt. procesor" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Toate datele de pe aceasta partiție ar trebui salvate mai întîi" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Instalarea pachetului %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Pentru a avea mai multe partiții, ștergeți una pentru a putea crea una de " "tip Extended " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Alegeți pachetele de instalat" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "TOATE partițiile existente și datele lor se vor pierde pe unitatea %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Sistemul dumneavoastră nu are destul spațiu disponibil pentru instalare\n" "sau actualizare (%d > %d)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Bhutan" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Interfața de rețea" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "Citesc datele despre imprimante..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Deconectat" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Grec" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg" "\\fP = NONE no issues are\n" "allowed else only /etc/issue is allowed." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts și Nevis" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "Demarare OF activă?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Nu puteți folosi JFS pentru partiții mai mici de 16MB" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Frecvența verticală pentru monitor: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "path" msgstr "cale" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Punct de montare" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "A apărut o eroare:\n" "%s\n" "Încercați să schimbați câțiva parametri" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "Restaurare sistem" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "IP de final pt. DHCP" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "Încă una" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Columbia" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Configurația curentă pt. `%s':\n" "\n" "Rețea: %s\n" "Adresa IP: %s\n" "Atribuire IP: %s\n" "Driver: %s" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Reunion" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Detalii" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Din motive de securitate va fi deconectat acum." #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "Unealtă de sincronizare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "Verific sistemul dvs..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "Tipărește" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Mongolia" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Montat\n" #: ../../help.pm:1 #, fuzzy, c-format msgid "Graphical Interface" msgstr "Interfața grafică" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "Restaurare utilizatori" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "Cheia de criptare pentru %s" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper-ul gestionează conexiunile RPC, care sunt folosite de " "protocoluri\n" "ca NFS și NIS. Server-ul portmap trebuie demarat pe calculatoare care \n" "funcționează ca servere pentru protocoluri care folosesc mecanismul RPC." #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "Echipamente detectate" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Mauritius" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "Activez partiția swap %s" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Armeană (vechi)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Monaco" #: ../../fs.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s Formatarea %s eșuată" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Partiționarea a eșuat: %s" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "Canada (cablu)" #: ../../help.pm:1 #, fuzzy, c-format msgid "Upgrade" msgstr "Actualizare %s" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "Stație de lucru" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "instalarea pachetului %s\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Kyrgyzstan" #: ../../help.pm:1 #, fuzzy, c-format msgid "With basic documentation" msgstr "Documentație" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron un orar de comandă periodică" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Trebuie să aveți o partiție root.\n" "Pentru aceasta, creați o partiție (sau faceți clic pe un existentă).\n" "Alegeți apoi acțiunea ``Punct de montare'' și fixați-o la '/'" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Proxy-ul ar trebui să fie http://..." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Africa de sud" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Sahara de vest" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Alegeți o partiție" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "Editare regulă curentă" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Vă rog să testați mausul" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Sector" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Qatar" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Nu aveți destul spațiu pentru a instala acest pachet" #: ../../help.pm:1 #, fuzzy, c-format msgid "generate auto-install floppy" msgstr "Generare dischetă de autoinstalare" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Mod de formare număr" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "Partajare fișiere" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Curăță /tmp la fiecare demaraj" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Malawi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "Vă rog să alegeți tipul de mouse folosit." #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "clasă dispozitiv" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Marea Britanie" #: ../../services.pm:1 #, c-format msgid "running" msgstr "rulează" #: ../../standalone/drakfloppy:1 #, c-format msgid "default" msgstr "Implicit" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "Indonezia" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "Franța [SECAM]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "limitează" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "trebuie avut" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Senegal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "Linia de comandă" #: ../../share/advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "acces la fișierele administrative" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port \\#%s" msgstr ", dispozitiv multifuncțional pe portul paralel \\#%s" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (val)\n" "\n" "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Montserrat" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to the Internet " msgstr "Conectare la Internet " #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "Restaurare diverse" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "Placă TV" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Imprimantă conectată la server SMB/Windows 95/98/NT" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the root umask." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "Șterge gazda/rețeaua selectată" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix est un Agent de Transport de Mail (MTA), care e programul care\n" "permite deplasarea mail-ului de la un calculator la altul." #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet failed." msgstr "Deconectare de la Internet eșuată." #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Aici puteți alege tasta sau combinația de taste ce va\n" "permite comutarea între diferitele dispuneri ale tastaturii\n" "(de ex. latină și non-latină)" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "Reconfigurarea \"la cald\" a rețelei" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "Restaurează de pe CD" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Vă rog alegeți ce adaptor de rețea doriți să folosiți pentru a vă conecta la " "Internet." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Partajarea conexiunii la Internet este acum dezactivată." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Latin American" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "Mod de tipărire text japonez" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "Fișier dispozitiv vechi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Info: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Buton `%s': %s" #: ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Vă rog să așteptați" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "Nimic" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "Adresa IP introdusă nu este corectă.\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Placă Ethernet" #: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Info" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Instalare" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Clic pe \"Următor-->\" dacă doriți ștergerea tuturor datelor și partițiilor " "existente\n" "pe acest disc fix. ATENȚIE! dupa acel clic nu veți putea recupera nici un " "fel de date\n" "sau partiții de pe discul fix, inclusiv date Windows.\n" "\n" "\n" "Clic pe \"<--Anterior\" pentru a opri această operație fără a pierde date\n" "și partiții prezente pe discul fix." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Ieșire din instalare" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "Coadă imprimare CUPS la distanță" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Maus - Sun" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "Instalare minimă" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Etiopia" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Mărime totală: %d / %d MB " #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "dezactivat" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "Căutare de noi scannere ..." #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "Dezactivez serverele..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose the time \n" "interval between each backup" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Instalarea lui %s a eșuat. Următoarea eroare a apărut:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Nu pot lansa mkinitrd -f /boot/initrd-%s.img %s. " #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Imprimantă de rețea (TCP/Socket)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "Backup fișiere utilizator..." #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Instalare sistem" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Primul server DNS (opțional)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "Configurare DHCPD" #: ../../standalone/drakgw:1 #, c-format msgid "The setup has already been done, but it's currently disabled." msgstr "Configurarea a fost făcută deja, dar acum este dezactivată." #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Instalare LILO/grub" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "Izraeliană" #: ../../standalone/logdrake:1 #, c-format msgid "load setting" msgstr "Configurare încărcare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Imprimanta \"%s\" pe serverul \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "Acum discheta poate fi scoasă" #: ../../help.pm:1 #, fuzzy, c-format msgid "Truly minimal install" msgstr "Instalare minimă" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Danemarca" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Mut partiția..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "Adresa IP pt. (acest) server DHCP" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Test de configurație" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "Instalez %s..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "Selectați cheia de criptare pt. sistemul de fișiere" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Andorra" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Botswana" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(valoare implicită: %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "Pagină de test alternativă (Letter)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "Configurare server DHCP.\n" "\n" "Acici puteți selecta diversele opțiuni pentru configurarea serverului DHCP.\n" "Dacă nu cunoașteți semnificația unei opțiuni, lăsați-o nemodificată.\n" "\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "Alegeți un server X" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Mărimea partiției swap în MB: " #: ../../standalone/drakbackup:1 #, c-format msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Formatat\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "Tip instalare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "%d numere separate prin virgulă" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Protocolul rusers permite utilizatorilor unei rețele să identifice\n" "cine e conectat la calculatoarele care răspund." #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "Configurare automată pași" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" "Vreți să știți mai multe despre comunitatea Open Source? Implicați-vă în " "lumea programelor libere!" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Barbados" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "Conectare eșuată.\n" "Verificați configurarea în Centrul de control Mandrake." #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "recepționat" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Fișier/_Nou" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "Adresa IP a serverulul DNS" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Ridicată" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "Fără imagine video" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "this field describes the device" msgstr "Acest câmp descrie dispozitivul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "Imprimante locale" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "Directorul de instalare a imaginilor" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Server" msgstr "Server NIS" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "Port: %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Spania" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Acest nume de utilizator e deja adăugat" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "Selectați un fișier" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Aplică" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "Auto-detecție porturi disponibile" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Partajarea conexiunii la Internet este dezactivată." #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "San Marino" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Belgia" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Kuweit" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Alegeți managerul de ferestre:" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "Asistent inițial" #: ../../install_steps.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "A apărut o eroare pe care nu știu să o interpretez în mod corect.\n" "Continuați pe riscul dumneavoastră." #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "Asteptați, parcurg fișierul: %s" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "Taiwan" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Pakistan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "Drepturi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Nume furnizor (ex. furnizor.ro)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: %s\n" msgstr "Versiune: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Folosește partiția Windows pentru loopback" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Armeană (mașină de scris)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Tip conexiune:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "Interfața grafică" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s cu accelerare 3D hardware" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "India" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Ciad" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Slovacia" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Singapore" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Cambogia" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Frecvența orizontală pentru monitor: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "Cale" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "Adăugare gazdă" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Doriți să permiteți utilizatorilor să partajeze directoare din directorul " "lor acasă?\n" "Aceasta va permite utilizatorilor sa facă un click pe \"Share\" în konqueror " "și nautilus.\n" "\n" "\"Personalizat\" permite configurarea per utilizator.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "China (eter)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Configurez imprimanta \"%s\"..." #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "Conexiune la Internet" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Încăcarea modulului %s a eșuat.\n" "Doriți să încercați cu alți parametri ?" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "Bine ați venit în lumea Open Source (surse deschise)" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnia și Herțegovina" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Aveți nevoie de un sistem de fișiere serios (ext2/ext3, reiserfs, xfs sau " "jfs) pentru acest punct de montare.\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Trebuie să introduceți un nume de gazdă sau o adresă IP.\n" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Olanda" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "Trimit fișierele..." #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Modem ISDN intern" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "Titlu" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "AVERTISMENT" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "Instalare gestionar de demaraj" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "reluare" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "Am detectat %s" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Insulele Virgine (SUA)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Backup defectuos" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Configurarea partajării conexiunii la Internet a fost făcută deja.\n" "Acum este dezactivată.\n" "\n" "Ce doriți să facem?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Introduceți adresa IP și portul gazdei a cărui imprimante doriți să le " "utilizați." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "Pipe în comanda" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Detecția perifericelor..." #: ../../standalone/drakconnect:1 #, c-format msgid "Click here to launch the wizard ->" msgstr "Click aici pentru a lansa asistentul ->" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Haiti" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Descrierea câmpurilor:\n" "\n" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "numele procesorului" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "Trebuie de asemenea formatat(ă) %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Atenție: aceasta operație e periculoasă." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "Introduceți o dischetă ce conține selecția pachetelor" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "Server:" #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "Alertări de securitate:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Suedia" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Polonia" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: %s\n" msgstr "Importanță: %s\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you want to eject your tape after the backup." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "Alte porturi" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "Număr buffere de captură pt. captura mmap" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "Controllere SMBus" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "Timp expirare conexiune (în sec.)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Croată" #: ../../help.pm:1 #, fuzzy, c-format msgid "Use existing partition" msgstr "Folosește partiționarea existentă" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "Nu pot executa serverul de oglindire %s" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Ajutor/_Despre..." #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "Configurare imprimante CUPS" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "nu am găsit nici un font în partițiile montate." #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "Eroare tip F00F" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client." msgstr "" "Ce client dhcp doriți să folosiți?\n" "Implicit este dhcp-client." #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "Nume domeniu:" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "Pe dischetă" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "Restaurează" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Căutarea pachetelor disponibile" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "Mesaj de inițializare" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Salvează tabelul de partiții" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "Conectare reușită." #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Cipru" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Șterge din RAID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Această cheie e prea simplă (ar trebui să fie de cel puțin %d caractere)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "Asistenți de configurare" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "Conexiune ISDN" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "principal" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Sari peste" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Niue" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Activează/Dezactivează toate interfețele de rețea configurate pentru fi\n" "inițializate la demaraj." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "important" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "Utilizatori" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Aruba" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Pegătirea gestionalului de demaraj..." #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (ex. %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Parolele nu sunt identice" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "Frecvență (MHz)" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "numărul de serie al procesorului" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "Ceas hardware fixat la GMT" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Dați un nume de fișier" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "" "Vă rog să specificați la ce port este conectată imprimanta dumneavoastră." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Schimbă CD-ROM-ul" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Paraguay" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Nu există un pilot cunoscut pentru placa dvs. de sunet (%s)" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "Forțează" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Ieșire" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Nu aveți configurată nici o interfață.\n" "Configurați-le prin click pe butonul 'Configurare'" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Estonian" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache e un server World Wide Web. E folosit pentru a servi fișiere HTML\n" "și CGI." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "Adăugare/ștergere clienți" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Alegeți interfața de rețea" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "Model necunoscut" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "Inscriptoare CD/DVD" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partiția demarată din oficiu\n" " (pentru demaraj MS-DOS, nu pentru lilo)\n" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "Selectați o imagine" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Am detectat o configurație de Firewall!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Nume de conexiune" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "Actualizare pachete selectate" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Unde doriți să montați fișierul loopback %s?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "numărul de butoane pe care le are mausul" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Nici o unitate de dischetă nu este disponibilă" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "Norma TV :" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "Familie CPUid" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 MB" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Lituanian AZERTY (nou)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "da, coprocesorul matematic are atașat un vector de excepții" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Ați selectat o partiție RAID software pentru root (/).\n" "Nici un gestionar de demaraj nu e capabil să folosească aceasta fără\n" "o partiție /boot. Adăugați deci o partiție /boot" #: ../../standalone/drakbackup:1 #, c-format msgid "Previous" msgstr "Precedentul" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Alt SO (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Pentru a activa mausul," #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Pornire rețea" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Capturile ecran vor fi disponibile după instalare în %s" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Calculez limitele sistemului de fișiere FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Conținut fișier" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication LDAP" msgstr "Autentificare prin LDAP" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "Permite alegerea oricărui pilot" #: ../../standalone/net_monitor:1 #, c-format msgid "Profile " msgstr "Profiluri" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "transmis" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "Palestina" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "%d șiruri separate prin virgulă" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "Aici este lista tuturor tastaturilor disponibile" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "Nume temă" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Help" msgstr "/_Ajutor" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Insulele Cook" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Formatez partiția %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "Nume gazdă necesar" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "Deselectează fonturile instalate" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakgw:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Renunță" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "Caut scannere configurate ..." #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Rotiță" #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "Plăci video" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "Șterge cele selectate" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "/Auto-detecție _MODEM-uri" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "Șterge imprimanta" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "AVERTISMENT!\n" "\n" "DrakX va redimensiona acum partiția Windows. Aveți grijă: această operație\n" "este periculoasă. Dacă nu ați făcut-o deja, ar trebui mai întâi să părăsiți\n" "instalarea și să executați scandisk în Windows (și defrag opțional), apoi\n" "reîncepeți instalarea. Ar trebui de asemenea să faceți o copie a datelor\n" "dumneavoastră. Dacă sunteți sigur, apăsați Ok." #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Bine ați venit la utilitarul de configurare email.\n" "\n" "Aici puteți configura sistemul dvs. de alertare.\n" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Other" msgstr "Alt tip" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Default" msgstr "Standard" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "Emulare buton 2" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "Abiword" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "Selectați un fișier imagine" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "Server X" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "A fost detectată o eroare la căutarea canalelor TV" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "Tastatură US (internațional)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "Nu este instalat" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "Conexiune LAN" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Fișier/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "Italiană" #: ../../interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "Basic" msgstr "De bază" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Honduras" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "IO Placă" #: ../../standalone/drakperm:1 #, c-format msgid "when checked, owner and group won't be changed" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Această partiție specială\n" "Bootstrap este pentru\n" "demararea duală a sistemului.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Yawerty)" msgstr "Rusească (Yawerty)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Quit" msgstr "/_Termină" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Memorie grafică: %s KB\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "acces la uneltele de compilare" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Dacă doriți să folosiți aboot, asigurați-vă să lăsați un spațiu liber\n" "(2048 de sectoare sunt de ajuns) la începutul discului" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "Pagină de test standard" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Creează" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "Ce" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "O eroare a apărut la ordonarea pachetelor:" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "Bulgară (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "Dezactivare Server" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "Cheie criptare pt. sistemul de fișiere" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "Înregistrează tema" #: ../../standalone/drakperm:1 #, c-format msgid "group" msgstr "grup" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Brazilia" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "Auto-instalare" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Asistent configurare rețea" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "Automontare mediu detașabil" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "Imprimare" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unkown driver" msgstr "Pilot necunoscut" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Creează o nouă partiție" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "Pilot:" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "Necunoscut" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Folosește fdisk" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "MIȘCAȚI ROTIȚA!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "trimis: " #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "IP automat" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Moldova" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you want to erase your tape before the backup." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL-ul trebuie să înceapă cu 'http:' sau 'ftp:'" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "Adaugă o regulă nouă la sfârșit" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Puteți furniza acum opțiunile modulului %s.\n" "Opțiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n" "de exemplu, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Ieșire din program fără a scrie în tabela de partiții ?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "Instalare pachete..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Olandeză" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "Este necesară instalarea următoarelor pachetele: \n" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Angola" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "Configurare servicii" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Personalizat" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Fișierul este deja folosit de un alt loopback, alegeți un altul" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "Numai citire" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Letonia" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "Nu există pilot cunoscut" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 MB" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Configurare rețea locală (Local Area Network)" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Lansează sisemul de sunet pe mașina dvs." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "Informații" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "Fără placă de rețea" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Ce sistem de fișiere doriți?" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 butoane" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Informații detaliate" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Malta" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "Acestă dischetă nu este formatată FAT" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Configurare rețea" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "Placă grafică" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Redimensionez partiția Windows" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "DNS 1 furnizor (opțional)" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Camerun" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Puteți partiționa acum discul %s \n" "Cînd ați terminat, nu uitați să înregistrați folosind `w'" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #, c-format msgid "Close" msgstr "Închide" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Calendar" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Pentru a folosi a coadă de imprimare lpd la distanță, trebuie să furnizați\n" "numele calculatorului serverului de imprimantă și numele imprimantei de pe " "server." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Islanda" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "lipsește ajutorul de consolă" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "oprit" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Dacă FPU are un vector IRQ" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Expandare arbore" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Expert Mode" msgstr "Mod expert" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Opțiuni imprimantă" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "Adresa rețea locală" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "Server SAMBA" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable IP spoofing protection." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / între elemente | selectează | următorul ecran" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "Subrețea:" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the host name or IP." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "Când" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "Al doilea server DNS (opțional)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Finlanda" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if " "\\fIarg\\fP = ALL. Only local ones\n" "if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the " "services you need, use /etc/hosts.allow\n" "(see hosts.allow(5))." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Adâncime de culoare: %s:\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Nu puteți deselecta acest pachet. Trebuie acualizat." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "Încarc de pe dischetă" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../ugtk.pm:1 #, c-format msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Slovenia" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Introduceți un utilizator\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "Selectare culoare bară de evoluție (ProgressBar)" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Acestea sunt diferitele intrările.\n" "Puteți să mai adăugați și altele sau să schimbați cele existente." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Execută comenzi programate de comanda at la timpul specificat la\n" "demararea lui at și lansează comenzi batch atunci cînd media de încărcare\n" "e suficient de scăzută." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "Sprijin radio:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "Instalare pachete SANE..." #: ../../standalone/drakfloppy:1 #, c-format msgid "boot disk creation" msgstr "Creare disc boot (demaraj)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Schimbă tipul" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Instalare SILO" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD/DVDROM to backup" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Felicitări, instalarea e completă.\n" "Scoateți media de demaraj și apăsați Enter pentru redemaraj.\n" "\n" "\n" "Pentru informații asupra corecțiilor disponibile pentru aceasta versiune\n" "Mandrake Linux, consultați Erata disponibilă la \n" "\n" "\n" "%s\n" "\n" "\n" "Informațiile asupra configurării sistemului sunt disponibile în \n" "capitolul referitor la post instalare din \n" "Official Mandrake Linux User's Guide." #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "Paranoică" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Rezoluție" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Pentru a imprima pe o imprimantă SMB, trebuie să furnizați\n" "numele calculatorului SMB (acesta nu este întotdeauna numele mașinii\n" "TCP/IP) si probabil adresa IP a serverului de imprimantă, cît și \n" "numele de access și numele de utilizator, parola și informația grupului de " "lucru." #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Accept/Refuse icmp echo." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "Reconfigurează" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Placa dvs. poate avea suport pentru accelerarea 3D hardware cu XFree %s, \n" "ACEST SUPORT ESTE EXPERIMENTAL ȘI POATE BLOCA SISTEMUL DVS." #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Serviciul xinetd" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "acces la uneltele de rețea" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" "Și, desigur, atingeți limitele multimedia cu ultimele programe pentru redare " "video, a fișierelor audio și pentru a manipula imaginile și fotografiile." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Eroare la instalrea lui aboot,\n" "să încerc să forțați instalarea chiar dacă aceasta distruge prima partiție ?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Options Description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %%).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000%% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " #> cat .backupignore\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Restaurează fișierele\n" "selectate" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Vă rog să completați câmpul de mai jos" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Doriți să salvați modificările în /etc/fstab?" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "Protocol demaraj" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "Discuri-LVM %s\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "Pachetul %s este necesar. Doriți instalarea lui?" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "La demaraj" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "Identificare magistrală" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Vă rog faceți mai întâi o copie a datelor dumneavoastră" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "Vatican" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Aveți mai multe discuri fixe, pe care din ele doriți să instalați Linux?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "CD de demaraj" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Eritreea" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "Șterge listă" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "Un mediu personalizabil" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Maroc" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "Ce model de imprimanta aveți?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "Adaugă o imprimantă nouă" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- Șterge" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Nepal" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "CPU #" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "mărimea porțiunii " # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "comenzile inainte de a demara, sau 'c' pentru linia de comanda." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Probleme la instalarea pachetului %s" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Veți fi notificați dacă încărcarea este mai mare decăt această valoare" #: ../../standalone/drakbug:1 #, c-format msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "Adaugă manula un scanner" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Reîncarcă tabelul de partiții" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Da, vreau autologare cu acest (utilizator, desktop)" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "Caută fonturi în lista instalată" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "Demarare" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "Tip tuner: " #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "Tasta \"Menu\"" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "Administrator de securitate:" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter your login" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Nu aveți nici o conexiune la Internet.\n" "Creeați una prin click pe butonul 'Configurare'" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "Copiere fonturi" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Automatizat" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Doriți să testați configurația ?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" " should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" " email)" msgstr "" "Standard: Acesta este nivelul de securitate recomandat pentru calculatoarele " "ce vor fi folosite\n" "pentru conectarea la Internet ca și client.\n" "\n" "Înaltă: Niște verificări rulează automat în fiecare noapte în plus față de " "restricțiile standard. \n" "\n" "Ridicată: Securitatea este suficient de înaltă pentru utilizarea " "calculatorului ca server ce \n" "poate accepta conexiuni de la mai mulți clienți. Dacă folosiți calculatorul " "numai ca și client la \n" "Internet, ar trebui să alegeți un nivel de securitate mai scăzut.\n" "\n" "Paranoică: Similar cu nivelul anterior, dar sistemul este complet închis și " "caracteristicile de \n" "securitate sunt la valorile lor maxime.\n" "\n" "Administrator de securitate:\n" "Dacă ați ales opțiunea 'Alerte de securitate', vor fi trimise alerte de " "securitate către acest\n" "utilizator (nume utilizator sau email)" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Înregistrare selecție pachete" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "Elimină ultimul element" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "Nu a fost creată nici o imagine de demaraj prin rețea!" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Alegeți ce servicii doriți să fie lansate automat la demaraj" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "Configurează rețeaua acum " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Alegeți o oglindă de la care să descărcați pachetele" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "La ce sector doriți să mutați?" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Vreți să apăsați acest buton?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Bahamas" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "Configurare manuală" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "Căutare" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Acest pachet încarcă harta de tastatură selectată ca în\n" "/etc/sysconfig/keyboard. Aceasta poate fi selectată folosind kbdconfig.\n" "Ar trebuie să-l lăsați activat pentru majoritatea calculatoarelor." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (driver de instalare ecran)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Numele gazdei Zeroconf nu trebuie să conțină un ." #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n" "mesaje de log în numeroaselor fișiere de log ale sistemului. E o idee\n" "bună să demarați întotdeauna syslog." #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "Necunoscut/Altele" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "Nu am detectat nici o placă TV!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Options" msgstr "Opțiuni" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "Generație procesor (ex. 8 pt. Pentium III,...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "Auto-detectat" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Refuză" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../printer/cups.pm:1 ../../printer/main.pm:1 #, c-format msgid "Remote Printers" msgstr "Imprimante la distanță" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "Crearea și formatarea fișierului %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Alegeți un LVM existent la care să adăugați" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "repornire XFS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No partition available" msgstr "nici o partiție disponibilă" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "Folosiți scannerele de pe gazdele: " #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "Toate cele deselectate" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "Rezolvitor nume de domeniu" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "Cheia de criptare (din nou)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "Lipsește numele obiectului partajat Samba" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "Instalare True Type terminată" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "Detecția este în progres..." #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "Construiește tot nucleul -->" #: ../../install_steps.pm:1 #, c-format msgid "Welcome to %s" msgstr "Bine ați venit la %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Introduceți discheta cu module actualizate în perifericul %s" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "Imagine la demaraj" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Imprimanta\n" "\n" "%s%s\n" "este conectată direct la sistemul dvs." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Partajare imprimante pe gazde/rețele: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "În anumite cazuri, driverul %s necesită informații suplimentare pentru a\n" "funcționa corect, dar funcționează bine și fără. Doriți să specificați\n" "opțiuni suplimentare sau îi permiteți să interogheze calculatorul pentru\n" "informațiile necesare? Ocazional, interogarea poate bloca calculatorul,\n" "dar n-ar trebui să producă nici o deteriorare." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Bine ați venit la utilitarul de partajare a conexiunii la Internet!\n" "\n" "%s\n" "Click pe Configurare pentru a lansa asistentul de configurare." #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Cuba" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "Caut noi imprimante..." #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Belize" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Timp expirat demarare nucleu" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Placa dvs. poate avea accelerare 3D hardware, dar numai cu XFree %s.\n" "Placa dvs. este utilizabilă cu XFree %s ce are un suport mai bun în 2D." #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Asistentul de partiționare DrakX a găsit următoarele soluții:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Ungar" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Sincronizare automată de timp (folosind NTP)" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 MB" #: ../../install_steps_interactive.pm:1 #, c-format msgid "LDAP Server" msgstr "Server LDAP" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "Suportul PCMCIA e destinat pentru a suporta cartele ethernet și modem-uri\n" "laptop-uri. Nu va demara decît dacă e configurat deci nu e nici o problemă\n" "dacă e instalat pe calculatoare care nu au nevoie de acesta." #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "Alegeți țara" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "Unelte de sine stătătoare" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "Unde" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "dar nu conține" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Configurație cartele PCMCIA..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "lipsește kdesu" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "Cheia de criptare" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Insulele Christmas" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" "Instalarea gestionarului de demaraj a eșuat. A apărut următoarea eroare :" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "Canal EIDE/SCSI" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "partiția %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Paranoică" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "<-- Șterge utilizator" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "Poziționarea pe magistrală" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "Nu am găsit nici o imprimantă!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "nume dat de vânzător pt. dispozitiv" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Șterge tot discul" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Implicit)" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: ()\n" "\n" "If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n" "in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/" "server\n" "to point to /etc/security/msec/server.. The /etc/security/msec/" "server\n" "is used by chkconfig --add to decide to add a service if it is present in " "the file\n" "during the installation of packages." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "Reconfigurare automată" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "Viteză recepție:" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Insulele Turks și Caico" #: ../../standalone/drakperm:1 #, c-format msgid "permissions" msgstr "drepturi" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 #, c-format msgid "<- Previous" msgstr "<- Precedentul" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing configuration" msgstr "Configurare partajare conexiune la Internet" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Basculare între plat și triere în funcție de grup" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Teme" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Opțiuni: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "În prezent folosiți %s ca manager de pornire.\n" "Clic pe Configurează pentru a lansa Asistentul de configurare." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Saint Helena" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "Nivel de securitate" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Câteva etape nu au fost terminate.\n" "\n" "Chiar vreți să abandonați acum?" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Sudan" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Poloneză (dispunere qwertz)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "Siria" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Bun venit la gestionarul de sisteme de operare %s!\n" "\n" "Alegeti un sistem de operare din lista de mai sus sau\n" "asteptati %d secunde pentru demararea din oficiu.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Portugheză" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Numele fișierului loopback" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Adresa serverului DNS ar trebui să fie în formatul 1.2.3.4" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "Sârbia" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "Noua Zeelandă" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Acest director ar trebui să rămână în sistemul de fișiere al rădăcinii" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "Tasta CapsLock" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Instalare gestionar de demaraj" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Alegeți memoria pentru placa grafică" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "Nume LVM?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Unele dispozitive din clasa de echipamente \"%s\" au fost șterse:\n" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Am găsit interfațele %s %s" #: ../../standalone/drakperm:1 #, c-format msgid "sticky-bit" msgstr "sticky-bit" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "Post-instalare" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "Nume domeniu intern" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "IRQ placă" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (umask)\n" "\n" "Set the user umask." msgstr "" #: ../../ugtk.pm:1 ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Alegeți perifericul pe care-l doriți pentru a realiza un disc de demarare." #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LILO cu meniu text" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "Trebuie să specificați o imagine nucleu" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "Execută" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Contactez serverul oglindă pentru preluarea listei pachetelor disponibile..." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Lituanian AZERTY (vechi)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Brazilian (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "Adresa IP a gazdei/rețelei:" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "Instalare sistem" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Saint Vincent și Grenadinele" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Fișier/_Deschide" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "The argument specifies if clients are authorized to connect\n" "to the X server on the tcp port 6000 or not." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "Poziția fișierului auto_install.cfg" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Întârziere Open Firmware" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Ungaria" #: ../../standalone/drakbackup:1 #, c-format msgid "Total progess" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "Configurare culori" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Noua Zeelandă" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Deja există unele restricții și în fiecare noapte sunt executate mai multe " "verificări automate" #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Trec de la ext2 la ext3" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Antilele olandeze" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Bun venit la asistentul de configurare a imprimantelor\n" "\n" "Acest asistent permite instalarea imprimantelor locale sau la distanță " "pentru a putea fi folosite de pe acest calculator sau de alte calculatoare " "din rețea.\n" "\n" "Veți putea introduce toate informațiile necesare pentru configurarea " "imprimantelor și veți avea acces la driverele de imprimantă, opțiunile de " "imprimare și tipurile de conexiune." #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "și %d imprimante necunoscute" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "GB" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Va rog înscrieți numele utilizatorului" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "Demarare de pe CD activă?" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "on Hard Drive" msgstr "pe disc fix" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "Conexiune cu Winmodem" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Set the password history length to prevent password reuse." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Acum, puteți rula xawtv (sub X Window!) !\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Swap insuficient pentru a termina instalarea, mai adăugați ceva" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "%s pe %s" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Which is your timezone?" msgstr "Care este zona dvs. de timp?" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Guineea" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "Sistemul este acum conectat la Internet." #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Insulele South Georgia și South Sandwich" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "Japonia (eter)" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Mozambic" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Icon" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 de culori (8 biți)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Citește-Scrie" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Mărime: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "Nume gazdă:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Mărimea porțiunii %s\n" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "Clădiți viitorul Linux!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "Imprimantă locală" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "Conexiune ADSL" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Eroare!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "Am detectat o conexiune pe cablu" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Report Bug" msgstr "/_Raportare eroare" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Redimensionează" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Dominica" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the device name to use for backup" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Rezoluție: %s\n" #: ../../standalone/logdrake:1 #, c-format msgid "matching" msgstr "conține" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Nu pot accesa modulele corespunzătoare nucleului dvs. (fișierul %s " "lipsește), în general aceasta înseamnă că discheta de demaraj nu este " "sincronizată cu mediul de instalare (vă rog creeați o nouă dischetă de " "demaraj)" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Vă rog selectați portul corect. De exemplu, portul \"COM1\" din Windows e\n" "numit \"ttyS0\" în GNU/Linux." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Următoarele pachete vor fi șterse" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "Conectare la Internet" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Folosește partiționarea existentă" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Canadiană (Quebec)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Dispozitiv mouse: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "Reselectați fonturile corecte" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Options Description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "We are now going to configure the %s connection." msgstr "" #: ../../share/advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "Corporația MandrakeExpert" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Write protection" msgstr "Auto-detecție imprimantă" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "You've not selected any font" msgstr "nu am găsit nici un font.\n" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Alegeți limba" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "Selectare model imprimantă" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "După schimbarea tipului de partiție %s, toate datele de pe această partiție " "se vor pierde" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d secunde" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Introduceți o dischetă goală în perifericul %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "Configurare sunet" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "Pagină de test Fotografie" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Partiționare disc personalizată" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Imprimantele\n" "\n" "%s%s\n" "sunt conectate direct la sistemul dvs." #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "Tip: %s " #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Slovacă (QWERTY)" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "Nu am detectat nici o placă de sunet!" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Port Mouse" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "Server FTP" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Enable/Disable msec hourly security check." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "%s fonts conversion" msgstr "Conversie fonturi pfm" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "Tip magistrală pe care este conectat mausul" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Uganda" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (size)\n" "\n" "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Comore" #: ../../network/netconnect.pm:1 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Mod Yaboot" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "Statele unite (cablu)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "Nu pot relansa LiLo!\n" "Lansați \"lilo\" ca root în linia de comandă pentru a termina instalarea " "temei LiLo." #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Maus comun cu 3 butoane" #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "Manager de programe (Software Manager)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful option for \n" "\tbackup. This option allows you to backup all your data \n" "\tthe first time, and only the changed data afterward.\n" "\tThen you will be able, during the restore step, to restore \n" "\tyour data from a specified date. If you have not selected \n" "\tthis option all old backups are deleted before each backup. \n" "\n" " - Differential Backups:\n" " \n" "\tThe differential backup, rather than comparing changes in the\n" "\tdata to the previous incremental backup, always compares the\n" "\tdata to the initial base backup. This method allows one to\n" "\trestore the base and then the differential from a certain date.\n" "\n" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "Re-trimite" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "KB" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "Rețea și Internet" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Lithuanian \"fonetic\" QWERTY" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "Imagini demaraj prin rețea" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "Partajarea scannerelor locale" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Sondarea Plug'n'Play a eșuat. Vă rog să precizați un monitor" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "Servicii și daemoni" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "cu /usr" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "Rețea" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Autodetectare imprimante conectate la mașini ce rulează Microsoft Windows" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Aceasta parolă e prea simplă" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Slovacă (QWERTZ)" #: ../../share/advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Instalare cu adevărat minimă (în mod expres fără urpmi)" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Transfer \n" "Now" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "Utilizează daemonul" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakconnect:1 ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Autentificare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "Servere CUPS adiționale:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "Unde doriți să montați %s?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "Restaurează prin rețea" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Algeria" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Dimensiune Initrd" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 MB" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "Setez imprimanta implicită..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "Interfață %s (folosind modulul %s)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Name: %s\n" msgstr "Nume: %s\n" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "Generez previzualizarea..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "serial" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "Unități DVD-ROM" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Georgian (dispunere \"Latină\")" #: ../../share/advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Acum puteți furniza opțiunile pentru modulul %s.\n" "Rețineți că orice adresă trebuie introdusă cu prefixul 0x ca în '0x123'" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Kenya" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Folosește ``Demontare' mai întîi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "Instalare pachete mtools..." #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "Trebuie să specificați o partiție rădăcină (root)" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "Creare primul pas" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "Ambele taste Shift simultan" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "Alegeți un model de scanner" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "Configurare DrakBackup" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Salvează ca..." #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Această interfață nu a fost configurată încă.\n" "Lansați asistentul de configurare în fereastra principală" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "Coreea de nord" #: ../../any.pm:1 #, c-format msgid "Autologin" msgstr "Autologare" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "Configurare sistem" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../../share/advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" "Adaptați-vă perfect computerul nevoilor dumneavoastră mulțumită celor 11 " "interfețe cu utilizatorul Mandrake Linux ce pot fi complet modificate: KDE " "3.1, GNOME 2.2, WindowMaker, ..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "Configurez imprimanta ..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Insulele Virgine (Brit.)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Bermude" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "Click aici dacă sunteți sigur(ă)." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "Șterge" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Lesotho" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "nume dispozitiv dinamic nou generat de devfs din nucleu" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakgw:1 ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Da" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Coasta de fildeș" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Ce protocol doriți să folosesc?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "Evoluție restaurare" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Estonia" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Aveți o gaură în tabela de partiții dar nu pot să o folosesc.\n" "Singura soluție e să deplasați partiția principală pentru a avea gaura lîngă " "partiția extinsă" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "Canal" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Adaugă" #: ../../standalone/drakgw:1 #, c-format msgid "No Internet Connection Sharing has ever been configured." msgstr "Partajarea conexiunii la Internet nu a fost configurată niciodată." #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr " Eroare la trimitere mail.\n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Tastatură" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "Alegeți conexiunea pe care doriți să o configurați" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "Vă rog să așteptați, configurez nivelul de securitate..." #: ../../share/advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.1: the ultimate development platform" msgstr "Mandrake Linux 9.1 este cea mai puternică platformă de dezvoltare" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Configurez placa de rețea %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "activat" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Vă rog să alegeți ce interfață de rețea va fi utilizată de către serverul " "DHCP." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Cautarea pachetelor de actualizat" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Punct de montare: " #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "parsează toate fonturile" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "Cu X" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Configurare multi-head (ieșiri multiple)" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Păstrez modificările?\n" "Configurația curentă este:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Nu puteți folosi ReiserFS pentru partiții mai mici de 32MB" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Protocolul rwho permite utilizatorului să recupereze lista tuturor\n" "utilizatorului conectați la un calculator care folosește procesul rwho\n" "(similar cu finger)." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Nume domeniu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "Partajare imprimante locale" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/91errata.php3" msgstr "http://www.mandrakelinux.com/en/91errata.php3" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "Imprimante disponibile" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Gol" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is correct, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Unde doriți să montați perifericul %s?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "Interfață \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 buton" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Test" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid direct root login." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "Coreea" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ce alegeți? (din oficiu `%s'%s) " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "official vendor name of the cpu" msgstr "Nume oficial dat de vânzător pt. procesor" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "Vânzător" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "Interfață %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Configurare mouse" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Alegeți punctele de montare" #: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 #: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakboot:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/net_monitor:1 #, c-format msgid "OK" msgstr "OK" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "Iugoslavă (latină)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "În curs de instalare" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "Lansează userdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "Este vorba de o instalare sau de o actualizare ?" #: ../../help.pm:1 #, fuzzy, c-format msgid "ISDN card" msgstr "Modem ISDN intern" #: ../../share/advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" "Pentru a împărtăși cunoștințele dumneavoastră și pentru a ajuta la " "dezvoltarea uneletelor Linux, participați la forumurile de discuții de pe " "paginile noastre \"Comunitate\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "Felicitări, configurația rețelei si a conexiunii la Internet s-a terminată.\n" "Configurația va fi acum aplicată sistemului dumneavoastră.\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "Imprimantă conectată la server CUPS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "delete" msgstr "Șterge" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "aici dacă nu." #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "Nume gazdă DHCP" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Pe ce port serie este conectat mouse-ul?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "A funcționat corect?" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Redusă" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Grenada" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Nesigur" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s sectori" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Nu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP " "PhotoSmart or an HP LaserJet 2200?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Guadeloupe" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "nu am găsit nici un font.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Vreți ca BackSpace să întoarcă Delete în consolă?" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Rata de actualizare verticală" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Începe etapa `%s'\n" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "Șterg %s..." #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Niger" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Fără imprimantă" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "Configurare alertare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "Opțiunei imprimantă NetWare" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "General" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing system: " msgstr "Sistem de tipărire:" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Adaugă un utilizator" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Configurația rețelei (%d adaptoare)" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "Pachetul obligatoriu %s lipsește" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Filipine" #: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1 #: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/draksec:1 #, c-format msgid "Ok" msgstr "OK" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Nume coadă de imprimare" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "Vreți să folosiți aboot?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Bielorus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "Mută fișierele pe partiția nouă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "Restaurează din catalog" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../standalone/drakperm:1 #, c-format msgid "group :" msgstr "Grup :" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "montarea partiției %s în directorul %s a eșuat" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "Ecran LILO" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LILO cu meniu grafic" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Estimare" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Nu puteți deselecta acest pachet. E deja instalat" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Să continui totuși?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Căutare pachete disponibile și reconstrucție bază de date RPM..." #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Specificați opțiunile" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "O dischetă personalizată de demaraj permite un mod de a accede la sistemul\n" "vostru Linux fără a depinde de gestionarul de demaraj normal. Acesta este \n" "util dacă nu doriți să instalați LILO (sau grub) în sistem sau dacă alte \n" "sisteme șterg LILO sau dacă LILO nu funcționează în sistemul dumneavoastră.\n" "O dischetă personalizată poate fi de asemenea folosită ca o imagine de\n" "depanaj, ceea ce permite recuperări mult mai ușoare în urma unor pane " "severe.\n" "Doriți să creați o dischetă de demaraj pentru sistemul dumneavoastră ?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Nu puteți monta un sistem de fișiere criptat pentru punctul de montare %s" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Insulele Norfolk" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "Instalare teme eșuată!" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "Nimic de făcut" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Folosește pentru loopback" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "Mut fișierele pe partiția nouă" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s cu accelerare 3D hardware EXPERIMENTALĂ" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Avansat(e)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "Transferă" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "Mai multe opțiuni" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Afganistan" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron e un program UNIX standard care execută programe-utilizator\n" "specificate la intervale periodice. vixie cron adaugă o serie de " "funcționalități la bazicul cron UNIX, printre care o mai bună securitate și\n" "opțiuni de configurare mai avansate." #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Burundi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "Adaugă client -->" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Citiți cu atenție!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Vă rog\n" "Introduceți țara și norma TV" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Port" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "Nu (mod expert)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "Nu e selectat nici un nucleu!" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Apasati enter pentru a demara OS-ul selectat, 'e' pentru a edita" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "Set-GID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "Cheile de criptare nu corespund" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "Tasta \"Windows\" dreapta" #: ../../standalone/drakbackup:1 #, c-format msgid "CDROM / DVDROM" msgstr "CDROM / DVDROM" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Rezoluții" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Vă rog să introduceți numele utilizator, parola și numele de domeniu pentru " "accesa această gazdă." #: ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "Șterge gazda selectată" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Configurarea rețelei" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "Fără partajare" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "Mută regula selectată un nivel în jos" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "TB" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check if you are using a DVDR device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "FATAL" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "Serverul DHCP va permite altor calculatoare să demareze folosind PXE în gama " "de adrese dată.\n" "\n" "Adresa rețelei este %s folosind masca de rețea %s.\n" "\n" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Delete" msgstr "Șterge" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Allow/Forbid reboot by the console user." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Pot să configurez calculatorul sa demareze automat X la demaraj.\n" "Doriți sa demarați X cînd redemarați ?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Construiește discul" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "Deconectează %s" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Stare:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "Server SSH" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "Protocol European" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", imprimanta \"%s\" pe serverul \"%s\"" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/drakfont:1 ../../standalone/draksplash:1 #, c-format msgid "Error" msgstr "Eroare" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "permite \"su\"" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Australia" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "Vă rog să așteptați în timp ce execut ttmkfdir..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Configurează numai placa \"%s\"%s" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "Nivel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "Schimbă sistemul de tipărire" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Sistemul dvs. permite configurarea mai multor ieșiri de afișare.\n" "Ce doriți să faceți?" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Configurare servicii" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "montare eșuată: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Imagine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "Administrare de la distanță" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "Toate cele selectate" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "Serviciul Webmin" #: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "device" msgstr "dispozitiv" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Toate" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "Grecia" #: ../../install_steps_interactive.pm:1 #, c-format msgid "An error occurred" msgstr "A apărut o eroare" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Acest pachet trebuie actualizat\n" "Sunteți sigur că doriți să-l deselectați ?" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Tamil (mașină de scris)" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Nu există mediu (disketă) în dispozitivul %s sau mediul este protejat la " "scriere .\n" "Introduceți una!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Directorul %s conține deja date\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "Imprimantă conectată la server Netware" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Introduceți cantintatea de RAM în MB" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Nume real" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "Gata" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "Foarte ridicată" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Alegeți partițiile pe care doriți sa le formataăi" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Nu a fost detectată nici o placă TV în calculatorul dvs. Vă rog să " "verificați dacă placa TV cu susținere în Linux este introdusă corect.\n" "\n" "\n" "Puteți vizita baza de date de echipamente la:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "Nu găsesc %s pe %s" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "Va dura câteva minute." #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "Folosiți scannere de pe alte calculatoare" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "Șterge regula selectată" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Acesez imprimantele conectate la serverele CUPS" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "Introduceți o dischetă în perifericul %s" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Maldive" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "compact" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 minut" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "pe canalul %d id %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "Sus" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "Firewall" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "Zona :" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "Controllere (E)IDE/ATA" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Server de imprimantă" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from the Internet complete." msgstr "Deconectare de la Internet reușită." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "Configurare personalizată" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Vă rog să indicați unde va fi disponibilă imaginea instalării.\n" "\n" "Dacă nu aveți un director existent, copiați conținutul\n" "de pe CD sau DVD\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre și Miquelon" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Portugalia" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Aveți o altă interfața?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", tipărire la %s" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Trece în mod normal" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Comun" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "De la cilindrul %d la cilindrul %d\n" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "Profil nou..." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Pe ce disc doriți să mutați ?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "Afișează logo pe consolă" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Windows Domain" msgstr "Domeniu Windows" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "Interfață %s (în rețeaua %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "Insulele Wallis și Futuna" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "Există FPU?" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Nu am gărit nici un scanner disponibil pe sistemul dvs.\n" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "Construiește Interfață de rețea unică" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "E corect ?" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Insulele Marshall" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Parola de root" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "Construiește toate nucleele -->" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Nu aveți nici o partiție swap\n" "\n" "Să continui totuși?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "Lipsește IP-ul serverului" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Surinam" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "Activează ACPI" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "Mediu Grafic" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: ../../standalone/drakbackup:1 #, c-format msgid "on Tape Device" msgstr "pe bandă" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "Nu fă nimic" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "Șterge client" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Tip sistem de fișiere: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "Pornire rețea..." #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "Viet Nam" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "/Descriere câmpuri" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "Optimizați securitatea" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 #, c-format msgid "Help" msgstr "Ajutor" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Numarul dvs. personal de telefon" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Cât spațiu doriți să păstrați alocat pentru Windows pe" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "Nume utilizator necesar" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opțiuni pentru imprimanta SMB/Windows 95/NT" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "Argumente opționale mkinitrd" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "Tipărire pagini de test" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 MB sau mai mult" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "Vă rog să selectați dispozitivul la care este conectat %s." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Neformatat\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "Verificări periodice" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "Configurare server PXE" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Acesta este nivelul de securitate standard recomandat pentru un calculator " "care va fi conectat ca un client la Internet." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Primul periferic de dischetă" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Fișier/_Termină" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Alegeți noua mărime" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "Clasă de mediu" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "%s nu este cunoscut în această versiune a programului Scannerdrake." #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Insulele Faroe" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "Repornește XFS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "Adaugă gazdă/rețea" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for empty passwords, for no password in /etc/shadow and " "for users with the 0 id other than root." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory to save to:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "Nume model" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Albania" #: ../../standalone/drakbackup:1 #, c-format msgid "No CDR/DVDR in drive!" msgstr "" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Teritoriul britanic din oceanul Indian" #: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Normal Mode" msgstr "Mod normal" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "Rețea %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "Conectează %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "Repornesc CUPS..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Punct de montare duplicat %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Configurare conexiuni" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "Necunoscut|Generic" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakperm:1 ../../standalone/draksplash:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Terminare" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Myanmar" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Auto alocare" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Să verific blocurile defectuoase?" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "Alte dispozitive multimedia" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "Nu există mașini la distanță" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Authentication NIS" msgstr "Autentificare NIS" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Opțiunea ``Limitează opțiunile liniei de comandă'' e inutilă fără parolă" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "IO_0 Placă" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Emiratele arabe unite" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "IO_1 Placă" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Tailanda" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "Routere:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Kazakstan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Instalare Mandrake Linux %s" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Tastatură Thai" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "Opțiuni de telefonie" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Bouvet Island" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Schimbați Cd-Rom-ul!\n" "\n" "Vă rog introduceți Cd-Rom-ul etichetat \"%s\" și apoi apăsați Ok.\n" "Dacă nu-l aveți, apăsați Renunță pentru a evita instalarea de pe acest Cd-" "Rom." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Polonez" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Mască de rețea:" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "Nu am găsit nici un disc fix" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 butoane" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Etichetă" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Înregistrează pe dischetă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "Auto-detecție imprimantă" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS e un protocol popular pentru a împărți fișiere de-a lungul rețelelor\n" "TCP/IP. Acest serviciu furnizează funcționalitatea server-ului NFS, care e\n" "configurată via fișierului /etc/exports." #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "Msec" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "Număr buffere de captură:" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ce alegeți? (0/1, din oficiu `%s') " #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Francez" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Ceh (QWERTY)" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "Detecția echipamentelor este în progres..." #: ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "Dispozitiv rețea" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Sumar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Next" msgstr "Următorul" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Nu puteți instala Gestionarul de demarare într-o partiție %s\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp/zeroconf)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Puerto Rico" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Lituanian QWERTY" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Următoarele pachete vor fi șterse pentru a permite actualizarea sistemului " "dvs: %s\n" "\n" "\n" "Chiar doriți ștergerea acestor pachete?\n" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Anguilla" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NIS Domain" msgstr "Domeniu NIS" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Antarctica" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Opțiuni pentru montare:" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Jamaica" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg, alert=1)\n" "\n" "Enable/Disable name resolution spoofing protection. If\n" "\\fIalert\\fP is true, also reports to syslog." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Vă rog să așteptați, pregătesc instalarea..." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Ceh (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Urmărește id-ul plăcii de rețea (util pt. laptopuri)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "Trebuie ca mai întâi să alegeți o imagine!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "Restaurează de pe Hard Disk" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Adaugă la LVM" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "Server DNS" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad și Tobago" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "simplu" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Șterge tot" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "Fără pagini de test" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "Adaptor %s: %s" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Insulele Falkland (Malvine)" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "Model necunoscut" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "authentication" msgstr "Autentificare" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_File" msgstr "/_Fișier" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Tamilă (TSCII)" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Mayotte" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Creez discheta de autoinstalare..." #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "Căutare scannere ..." #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "Partiționare" #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "Rusia" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "Plăci Ethernet detectate" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "Jurnal de sistem" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "Nu se poate creea catalogul!" #: ../../share/advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Spațiu pe disc insuficient pentru auto-alocare" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Alegeți parola pentru root" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Nu există un pilot liber pentru placa dvs. de sunet (%s), dar exista unul " "proprietar la \"%s\"." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "După redimensionarea partiției %s toate datele de pe aceasta partiție vor fi " "pierdute" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "Configurare conexiune la Internet" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "Scanez canalele TV" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "nucleu:" #: ../../standalone/harddrake2:1 #, c-format msgid "/_About..." msgstr "/Despre..." #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Preferință: " #: ../../standalone/drakconnect:1 #, c-format msgid "Wizard..." msgstr "Asistent" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "Servicii: %d activate pentru %d înregistrate" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Creare floppy de demaraj" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Insulele Solomon" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Numele de grup" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "Afișează configurație interfață curentă" #: ../../help.pm:1 #, c-format msgid "Development" msgstr "Dezvoltare" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Gata" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "Server Web" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Chile" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(deja adăugat %s)" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr ", folosind comanda %s" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Tastele Alt și Shift simultan" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "Indicatori" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "Adăugare/ștergere utilizatori" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "săptămânal" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Configurare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "Aici este lista tuturor țărilor disponibile" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "Pagină de test alternativă (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Dacă aveți toate CD-urile din lista de mai jos, apăsați Ok.\n" "Dacă nu aveți nici unul din aceste CD-uri, apăsați Renunță.\n" "Dacă nu vă lispsesc decît cîteva CD-uri, deselectați-le și faceți click pe " "Ok." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "Vă rog să așteptați" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Nou" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "Încarcă de pe dischetă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "A fost detectată următoarea imprimantă" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "Dischetă de demaraj" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Norvegian" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "Caut noi scannere disponibile..." #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "Server Apache-World Wide Web " #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "Pasul pt. procesor (număr sub-model (generația))" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "Configurare imagine de la demaraj" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "China" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Georgia" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "Citesc date despre imprimantele instalate..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " Șterge acum " #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "server" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Introduceți o dischetă formatată FAT în unitatea %s" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "da, procesorul are un coprocesor matematic" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Vă rog să așteptați... Aplic configurația" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Bun venit la gestionarul de sisteme de operare GRUB!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "Controllere SCSI" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "Nume gazdă Zeroconf" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "Adresa IP ar trebui să fie în formatul 1.2.3.4" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Ecuador" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "Adăugă un element" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Nu am detectat nici o placă de sunet. Încercați \"harddrake\" după instalare" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Interpretor" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome și Principe" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "Nu pot face login folosind numele utilizator %s (parolă incorectă?)" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "Pachet neinstalat" #: ../../share/advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "Deveniți un MandrakeExpert" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Samoa americană" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Protocol" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "Ajutor HardDrake" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "Bogomips" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Configurare Mandrake Terminal Server" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Nu puteți selecta/deselecta acest pachet" #: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../network/modem.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Avertisment" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "Nume gazdă la distanță" #: ../../standalone/drakconnect:1 #, c-format msgid "deactivate now" msgstr "Dezactivează acum" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "acces la programele X" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "Calculez dimensiunea partiției Windows" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "Italia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Nume imprimantă" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "Dezactivează" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "eroare la demontarea %s: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "Fă-o" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Insulele Cayman" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "%s nu răspunde" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "Selectare manuală model" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Formatează" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Diverse" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "Unități ZIP" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "Albaneză" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Lituania" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Compact" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "Model detectat: %s %s" #: ../../share/advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "MandrakeSoft a selectatat cel mai bun software pentru dumneavoastră" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud \n" "\n" msgstr "" "Acesta este HardDrake, unealta Mandrake de configurare a echipamentelor.\n" "Versiunea:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Local files" msgstr "Fișiere locale" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "poate" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Panama" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Placa dvs. grafică pare a avea un conector TV-OUT.\n" "Acesta poate fi configurat folosind frame-buffer-ul.\n" "\n" "Pentru aceasta trebuie să conectați placa grafică la un TV înainte de a " "demara calculatorul dvs.\n" "Atunci alegeți intrarea \"TVout\" în gestionarul de demarare\n" "\n" "Cartela grafică are facilitatea TV-OUT?" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Monitor" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 mii de culori (16 biți)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: %d KB\n" msgstr "Mărime: %d KB\n" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "Șterge fonturi din sistemul dvs." #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "Interfața grafică la demaraj" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory to save:" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "format of floppies supported by the drive" msgstr "Formatele de dischete suportate de unitate" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Nu aveți destule partiții pentru nivelul RAID %d\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "Conectat" #: ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer \\#%s" msgstr "imprimantă USB \\#%s" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Macedoneană" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "Punți și controllere de sistem" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Fișier/_Salvează" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Mali" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "Fără detalii" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "foarte simpatic" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "Previzualizare" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "Telecomandă" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "Server XFree86: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "Permite clienți Thin" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Georgian (dispunere \"Rusă\")" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #, c-format msgid "/_Options" msgstr "/_Opțiuni" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "Modelul dvs. de imprimantă" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(AVERTISMENT! Folosiți XFS pentru partiția root,\n" "crearea unei dischete de demaraj de 1,44Mb probabil va eșua,\n" "pt. că XFS necesită spațiu mare)." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../../share/advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Unealta de configurare multiplă Mandrake" #: ../../standalone/drakbackup:1 ../../standalone/drakperm:1 #: ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "Salvează" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "Scanner-ul %s nu este susținut " #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "Încarcă driverele pentru dispozitivele USB." #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "Unități de disc" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "Introduceți un URI de dispozitiv de imprimare" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" "Succesul MandrakeSoft se bazează pe principiul Programe Libere. Noul " "dumneavoastră sistem de operare este rezultatul muncii colaborative a " "comunității Linux mondiale." #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Israel" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Guyana franceză" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../standalone/drakperm:1 #, c-format msgid "add a rule" msgstr "Adaugă o regulă" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "%s (Port %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" " Enable/Disable sulogin(8) in single user level." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Acceptare utilizator" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Server" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Alegere greșită, încercați din nou\n" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "Insulele Heard și McDonald" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "Nu există driver alternativ" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Trece în mod expert" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(pe această mașină)" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Adresa gateway-ului ar trebui să fie în formatul 1.2.3.4" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "Căutare pachetele instalate deja ..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Driver" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "Imprimantă conectată la server lpd:" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Fără maus" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Germania" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Austria" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Restrângere arbore" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "Configurator auto-instalare" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Configurare rețea" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Unde doriți să instalați Gestionarul de demaraj ?" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "%s nu are susținere în această versiune a Mandrake Linux." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "Client DHCP" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Restaurarea din fișierul %s a eșuat: %s" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serie, tip vechi C7)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "Dispozitiv nou devfs" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Configurare stil demarare" #: ../../help.pm:1 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "Sincronizare automată de timp (folosind NTP)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../share/advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.1" msgstr "Mulțumim că ați ales Mandrake Linux 9.1" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Armeană (fonetic)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "Model placă:" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "Client Thin" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "Pornire Server" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Turkmenistan" #: ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "Toate mașinile de la distanță" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "Instalare teme" #: ../../standalone/drakbackup:1 #, c-format msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Pregătesc instalarea" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "Editează gazda/rețeaua selectată" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "Adăugă utilizator -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Nauru" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "Instalare fonturi True Type" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Autodetectare imprimante conectate direct la rețeaua locală" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "Configurație LAN" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "Model disc fix" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Nu puteți folosi volumul logic LVM pentru punctul de montare %s" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "Preia fonturi Windows" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Iraniană" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Croația" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Pasarelă:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "Adăugare server" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "Nume imprimantă la distanță" #: ../../share/advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Periferic: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Termeni de licențiere" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "Opțiuni sistem" #: ../../standalone/drakbackup:1 #, c-format msgid "Please enter the directory where backups are stored" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "Vă rog să alegeți nivelul de securitate dorit" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "Această gazdă este deja în listă, nu poate fi adăugată din nou.\n" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr ", imprimantă USB " #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Alegeți aplicațiile ce vor suporta fonturile:" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "Configurare X" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Turcă (model tradițional \"F\")" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Felicitări!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "Jos" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "Instalare rpm" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Timp rămas " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "Tastatura UK" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Demontare" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "Dezinstalează fonturi" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "German (făra taste moarte)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "Transfer %s..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 mii de culori (15 biți)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "Puteți exporta fișiere folosind sistemul NFS sau Samba. Pe care îl alegeți?" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Reboot" msgstr "Repornire sistem" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Gambia" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "Centrul de control Mandrake" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is correct, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "Memorează parola" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Partajarea conexiunii la Internet este acum activată." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Folosește spațiul liber din partiția Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "Am găsit %s la %s, doriți să configurare automată?" #: ../../security/help.pm:1 #, c-format msgid "" "Arguments: (arg)\n" "\n" "Use password to authenticate users." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "Driver XFree86: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Alegeți pachetele pe care doriți să le instalați" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Papua Noua Guinee" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "Sârbă (dispunere chirilică)" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Crearea dischetei de demaraj..." #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "Vă rog să așteptați, testez conexiunea dvs..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Oprire rețea" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "ID de login" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS e un protocol popular pentru a împărți fișiere de-a lungul rețelelor\n" "TCP/IP. Acest serviciu furnizează funcționalitatea blocării fișierelor NFS." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "Client DHCP" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "Omite modulele raid" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd este procesul de imprimare necesar pentru ca lpr să funcționeze corect.\n" "E un server care arbitrează activitatea imprimantei(lor)." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "Configurare conexiune la Internet" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "numere separate prin virgulă" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "Mută regula selectată un nivel în sus" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Următorul scanner\n" "\n" "%s\n" "este disponibil pe sistemul dvs.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Chiar doriți să ștergeți imprimanta \"%s\"?" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "Nu am spațiu suficient pentru instalare" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "Imprimanta implicită" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Ați configurat căi multiple de conectare la Internet.\n" "Alegeți-o pe cea pe care doriți să o folosiți.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Modifică RAID" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Adăugați un utilizator" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "Discuri-RAID %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Liberia" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Alegeți tastatura" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Formatare partiții" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Corectare automată a configurației CUPS" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "Rulează \"%s\" ..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "activare sprijin radio" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "Partajare scannere către gazdele:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Numele fișierului loopback: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Vă rog să specificați la ce imprimantă vor fi trimise lucrările." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Delay before booting the default image" msgstr "Timp de așteptare înaintea demarării imaginii standard" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check for multisession CD" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "user" msgstr "utilizator" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakgw:1 #, c-format msgid "Configure" msgstr "Configurează" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Vă rog introduceți numele calculatorului.\n" "Numele calculatorului ar trebui să fie un nume întreg-calificat,\n" "ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n" "Puteți de asemenea introduce adresa IP a pasarelei, dacă aveți una" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "Creează o temă nouă " #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "Explicații utilitare Mandrake" #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "Nu am găsit nici o imagine" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Cîteva pachete importante nu s-au instalat corect.\n" "Sau aveți o problemă cu perifericul de cdrom sau cu \n" "cdrom-ul propriu-zis. Folosiți comanda \"rpm -qpl \n" "Mandrake/RPMS/*.rpm\" pentru a verifica cdrom-ul pe un\n" "sistem instalat.\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "Model detectat: %s" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Azerbaijan" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "aceasta este magistrala fizică la care este conectat dispozitivul (ex. PCI, " "USB, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Cum e conectată imprimanta ?" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "Nivel de securitate" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "Rezoluție finală" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "Servicii" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 MB" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Stație de lucru de birou" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Programe gen Office: procesoare de text (kword, abiword), calcul tabelar " "(kspread, gnumeric), vizualizatoare de fișiere pdf etc." #: ../../share/compssUsers:999 msgid "Game station" msgstr "Stație de lucru pt. jocuri" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Programe de amuzament: arcade, boards, strategie etc." #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Stație de lucru multimedia" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Programe de editare/redare pt. sunet și video" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Stație de lucru în Internet" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Set de unelte pt. citire/trimitere poștă și știri (pine, mutt, tin...) și " "navigare pe Web" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Calculator în rețea (client)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Clienți pt. diverse protocoale, inclusiv ssh" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Configurație" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Unelete pentru ușurarea configurării calculatorului dvs." #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Stație de lucru științifică" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "Aplicții științifice precum gnuplot" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Unelte consolă" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Editoare, interpretoare, terminale, unelte fișiere" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "Stație de lucru KDE" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "Mediul de birou K, mediul grafic de bază cu o colecție de unelte asociate" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Stație de lucru Gnome" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "Un mediu grafic cu un set de aplicații prietenoase și unelte de birou" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Alte desktopuri grafice" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Biblioteci de dezvoltare C și C++, programe și fișiere include" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Documentație" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Cărți și HowTo despre Linux și programele libere" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Baza standard Linux. Sprijin pentru aplicații ale altora." #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Web/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "Poștă" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "Server de poștă Postfix" #: ../../share/compssUsers:999 msgid "Database" msgstr "Baze de date" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "Server de baze de date MySQL sau PostgreSQL" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Firewall/Router" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Gateway Internet" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Server nume de domeniu (DNS) și NIS" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Server în rețea" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Server NFS, SMB, Proxy, SSH" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Set de unelte pentru citire și trimitere poștă și știri și pentru navigare " "pe Web" #~ msgid "Internet connection & configuration" #~ msgstr "Configurare și conectare la Internet" #~ msgid "Configure the connection" #~ msgstr "Configurare conexiune" #~ msgid "Disconnect" #~ msgstr "Deconectează" #~ msgid "Connect" #~ msgstr "Conectează" #~ msgid "" #~ "\n" #~ "You can reconfigure your connection." #~ msgstr "" #~ "\n" #~ "Puteți să reconfigurați conexiunea" #~ msgid "" #~ "\n" #~ "You can connect to the Internet or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "Puteți să vă conectați la Internet sau să reconfigurați conexiunea" #~ msgid "You are not currently connected to the Internet." #~ msgstr "Acum NU sunteți conectat(ă) la Internet." #~ msgid "" #~ "\n" #~ "You can disconnect or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "Puteți să vă deconectați sau să reconfigurați conexiunea" #~ msgid "You are currently connected to the Internet." #~ msgstr "Acum sunteți conectat(ă) la Internet." #~ msgid "Relaunch 'lilo'" #~ msgstr "Relansează 'lilo'" #~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." #~ msgstr "Fă initrd 'mkinitrd -f /boot/initrd-%s.img %s'." #~ msgid "Write %s" #~ msgstr "Scrie %s" #~ msgid "Copy %s to %s" #~ msgstr "Copiez %s în %s" #~ msgid "Backup %s to %s.old" #~ msgstr "Copie de siguranță %s în %s.old" #~ msgid "ttf fonts conversion" #~ msgstr "Conversie fonturi ttf" #~ msgid "Fonts conversion" #~ msgstr "Conversie fonturi" #~ msgid "Author:" #~ msgstr "Autor: " #~ msgid "Audio station" #~ msgstr "Stație audio" #~ msgid "Sound playing/editing programs" #~ msgstr "Programe de redare/editare sunet" #~ msgid "Video station" #~ msgstr "Stație video" #~ msgid "Video playing programs" #~ msgstr "Programe de redare video" #~ msgid "Graphic station" #~ msgstr "Stație grafică" #~ msgid "Graphics programs" #~ msgstr "Programe de grafică"