# translation of DrakX-pt.po to Português # translation of pt.po to # # Latest versions of po files are at http://www.mandrivalinux.com/l10n/pt.php3 # # Copyright (C) 2000 Mandriva # # Fernando Moreira , 1999. # Jorge Costa , 2001. # José JORGE , 2002,2003. # Jose Jorge , 2003, 2004, 2005. # Jose Carlos D. S. Saraiva , 2004. # Zé , 2004, 2005. # Américo José Melo , 2004, 2005. # Ze , 2004. # José Melo , 2005. # José Melo , 2005. # Jose JORGE , 2005. msgid "" msgstr "" "Project-Id-Version: DrakX-pt\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-12-08 21:52+0800\n" "PO-Revision-Date: 2005-12-05 03:48+0000\n" "Last-Translator: José Melo \n" "Language-Team: Português \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "Que dispositivo USB deseja formatar?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "Está prestes a formatar um dispositivo USB \"%s\". Isto irá apagar todos os " "dados existentes.\n" "Certifique-se que o dispositivo seleccionado é o dispositivo USB que deseja " "formatar.\n" "É aconselhável desligar todos os outros dispositivos de armazenamento USB " "enquanto executa esta operação." #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "A chave USB não é gravável" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "A chave USB parece ter a protecção de escrita activada.\n" "Por favor desligue-a, retire a protecção, e volte-a a ligar." #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Tentar novamente" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "Continuar sem chave USB" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" "A chave USB parece ter a protecção de escrita activada, mas é possível\n" "desliga-la agora em segurança.\n" "\n" "\n" "Clique no botão para reiniciar o computador, remova-a, retire a protecção\n" "de escrita, volte-a a ligar, e execute o Mandriva Move novamente." #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Reboot" msgstr "Reiniciar" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" "A sua chave USB não tem nenhuma partição Windows (FAT)\n" "válida. É preciso uma para continuar (além disso, é melhor\n" "para que tenha a possibilidade de mover e aceder os seus\n" "ficheiros nas máquinas que correm Windows). Por favor\n" "ligue uma chave USB que tenha uma partição Windows.\n" "\n" "\n" "Pode também proceder sem uma chave USB - continuará na\n" "mesma a poder usar o Mandriva Move como um sistema\n" "operativo Mandriva normal." #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" "Não foi detectada nenhuma chave USB no seu sistema. Se ligar\n" "uma chave USB agora, o Mandriva Move irá ter a capacidade de\n" "gravar transparentemente os dados na seu directório pessoal\n" "e na configuração global do sistema, para o próximo arranque\n" "neste computador ou num outro. Nota: se ligar agora uma chave,\n" "espere alguns segundos antes de ser detectada novamente.\n" "\n" "\n" "Pode também proceder sem uma chave USB - continuará a poder\n" "usar na mesma o Mandriva Move como um sistema operativo\n" "Mandriva normal." #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "Precisa de uma chave para gravar os seus dados" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "Detectar chave USB novamente" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "Configurar chave USB" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Por favor aguarde, a configurar o sistema de ficheiros da chave USB..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" "Introduza a sua informação de utilizador, a senha será usada para protecção " "de ecrã" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "Auto configuração" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Por favor aguarde, a detectar e a configurar dispositivos..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559 #: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19 #: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775 #: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19 #: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 #: network/netconnect.pm:838 network/netconnect.pm:867 #: network/netconnect.pm:966 network/netconnect.pm:970 #: network/netconnect.pm:974 network/netconnect.pm:979 #: network/netconnect.pm:1124 network/netconnect.pm:1128 #: network/netconnect.pm:1247 network/netconnect.pm:1252 #: network/netconnect.pm:1272 network/netconnect.pm:1431 #: network/thirdparty.pm:321 network/thirdparty.pm:328 #: network/thirdparty.pm:372 network/thirdparty.pm:374 #: network/thirdparty.pm:395 network/thirdparty.pm:419 #: printer/printerdrake.pm:244 printer/printerdrake.pm:251 #: printer/printerdrake.pm:276 printer/printerdrake.pm:422 #: printer/printerdrake.pm:427 printer/printerdrake.pm:440 #: printer/printerdrake.pm:450 printer/printerdrake.pm:514 #: printer/printerdrake.pm:686 printer/printerdrake.pm:690 #: printer/printerdrake.pm:772 printer/printerdrake.pm:1555 #: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640 #: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689 #: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795 #: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880 #: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933 #: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995 #: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129 #: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176 #: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267 #: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285 #: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360 #: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924 #: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214 #: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783 #: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183 #: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451 #: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594 #: printer/printerdrake.pm:4714 standalone/drakTermServ:394 #: standalone/drakTermServ:464 standalone/drakTermServ:473 #: standalone/drakTermServ:774 standalone/drakTermServ:781 #: standalone/drakTermServ:802 standalone/drakTermServ:849 #: standalone/drakTermServ:1095 standalone/drakTermServ:1572 #: standalone/drakTermServ:1581 standalone/drakTermServ:1589 #: standalone/drakTermServ:1594 standalone/drakTermServ:1602 #: standalone/drakTermServ:1618 standalone/drakTermServ:1638 #: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1105 standalone/drakbackup:1136 #: standalone/drakbackup:1321 standalone/drakbackup:1653 #: standalone/drakbackup:1809 standalone/drakbackup:2525 #: standalone/drakbackup:4435 standalone/drakclock:124 #: standalone/drakconnect:676 standalone/drakconnect:680 #: standalone/drakconnect:685 standalone/drakconnect:700 #: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616 #: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385 #: standalone/draksambashare:389 standalone/draksambashare:392 #: standalone/draksambashare:395 standalone/draksambashare:455 #: standalone/draksambashare:479 standalone/draksambashare:553 #: standalone/draksambashare:635 standalone/draksambashare:702 #: standalone/draksambashare:802 standalone/draksambashare:809 #: standalone/draksambashare:944 standalone/draksambashare:1135 #: standalone/draksambashare:1144 standalone/draksambashare:1153 #: standalone/draksambashare:1174 standalone/draksambashare:1183 #: standalone/draksambashare:1192 standalone/draksambashare:1212 #: standalone/draksambashare:1220 standalone/draksambashare:1232 #: standalone/draksplash:162 standalone/drakxtv:107 #: standalone/finish-install:66 standalone/logdrake:171 #: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Erro" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Ocorreu um erro, mas não se sabe bem como o resolver.\n" "Continue a seu próprio risco." #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "Ocorreu um erro" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "Ocorreu um erro:\n" "\n" "\n" "%s\n" "\n" "Isto pode vir de uma configuração corrompida no sistema\n" "de ficheiros da chave USB, nesse caso se a remover e\n" "reiniciar o Mandriva Move o problema pode ficar resolvido.\n" "Para o fazer, clique no botão correspondente.\n" "\n" "\n" "Pode também querer reiniciar e remover a chave USB, ou\n" "examinar o seu conteúdo noutro OS, ou até mesmo ver\n" "os ficheiros de registo na consola #3 e #4 para tentar\n" "adivinhar o que se passa." #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "Remover os ficheiros de configuração do sistema" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "Simplesmente reiniciar" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "Apenas pode correr sem suporte CD-ROM" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "Terminar esses programas" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "Sem suporte CD-ROM" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 #: diskdrake/interactive.pm:1061 diskdrake/interactive.pm:1071 #: diskdrake/interactive.pm:1124 #, c-format msgid "Read carefully!" msgstr "Leia com atenção!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "Não pode usar outro CD-ROM enquanto os seguintes programas estão a correr: \n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "A copiar para a memória para permitir a remoção do CD-ROM" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB ou mais" #: Xconfig/card.pm:162 #, c-format msgid "X server" msgstr "Servidor X" #: Xconfig/card.pm:163 #, c-format msgid "Choose an X server" msgstr "Escolha um servidor X" #: Xconfig/card.pm:195 #, c-format msgid "Multi-head configuration" msgstr "Configuração Multi-cabeça" #: Xconfig/card.pm:196 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "O seu sistema suporta configuração multi-cabeça.\n" "O que deseja fazer?" #: Xconfig/card.pm:265 #, c-format msgid "Can not install Xorg package: %s" msgstr "Não pode instalar o o pacote Xorg: %s" #: Xconfig/card.pm:275 #, c-format msgid "Select the memory size of your graphics card" msgstr "Seleccione o tamanho da memória da sua placa gráfica" #: Xconfig/card.pm:372 #, c-format msgid "Xorg configuration" msgstr "Configuração Xorg" #: Xconfig/card.pm:374 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Que configuração do Xorg deseja ter?" #: Xconfig/card.pm:407 #, c-format msgid "Configure all heads independently" msgstr "Configurar todas as cabeças independentemente" #: Xconfig/card.pm:408 #, c-format msgid "Use Xinerama extension" msgstr "Usar extensão Xinerama" #: Xconfig/card.pm:413 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Configurar apenas a placa \"%s\"%s" #: Xconfig/card.pm:425 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:432 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s com aceleração hardware 3D" #: Xconfig/card.pm:434 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "" "A sua placa pode ter suporte para aceleração hardware 3D com o Xorg %s." #: Xconfig/card.pm:440 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s com aceleração hardware 3D EXPERIMENTAL" #: Xconfig/card.pm:442 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "A sua placa pode ter suporte para aceleração hardware 3D com o Xorg%s,\n" "ATENÇÃO ESTE SUPORTE É EXPERIMENTAL E PODE BLOQUEAR O COMPUTADOR." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975 #, c-format msgid "Custom" msgstr "Personalizado" #: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 install_steps_interactive.pm:1328 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899 #: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987 #: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93 #: standalone/logdrake:176 standalone/net_applet:103 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Sair" #: Xconfig/main.pm:129 #, c-format msgid "Graphic Card" msgstr "Placa Gráfica" #: Xconfig/main.pm:132 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "Monitor" #: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287 #, c-format msgid "Resolution" msgstr "Resolução" #: Xconfig/main.pm:138 #, c-format msgid "Test" msgstr "Teste" #: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #: printer/printerdrake.pm:1112 standalone/drakfont:493 #: standalone/drakfont:555 #, c-format msgid "Options" msgstr "Opções" #: Xconfig/main.pm:178 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "O seu ficheiro de configuração Xorg está danificado, irá ser ignorado." #: Xconfig/main.pm:196 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Manter as alterações?\n" "A configuração actual é:\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor for head #%d" msgstr "Escolha um monitor para a cabeça #%d" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "Escolha um monitor" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "Genérico" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 #: standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "Marca" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Verificação Plug'n Play falhada. Por favor escolha o monitor correcto" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Os dois parâmetros críticos são a taxa de refrescamento vertical, que é a " "taxa\n" "em que todo o ecrã é refrescado, e principalmente a taxa de sincronização\n" "horizontal, que é a taxa em que linhas são mostradas.\n" "\n" "É MUITO IMPORTANTE que não especifique um tipo de monitor com taxa de " "sincronização\n" "que esteja além das capacidades do seu monitor: pode danificar seu monitor.\n" " Se tiver dúvidas, escolha definições conservadoras." #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "Taxa de refrescamento horizontal" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "Taxa de refrescamento vertical" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "256 cores (8 bits)" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 mil cores (15 bits)" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 mil cores (16 bits)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "16 milhões de cores (24 bits)" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "Resoluções" #: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1595 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Outros" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Choose the resolution and the color depth" msgstr "Escolha a resolução e a profundidade da cor" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Graphics card: %s" msgstr "Placa Gráfica: %s" #: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436 #: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321 #: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143 #: standalone/drakTermServ:195 standalone/drakTermServ:515 #: standalone/drakbackup:1361 standalone/drakbackup:4095 #: standalone/drakbackup:4155 standalone/drakbackup:4199 #: standalone/drakbackup:4453 standalone/drakconnect:158 #: standalone/drakconnect:852 standalone/drakconnect:939 #: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586 #: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339 #: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922 #, c-format msgid "Ok" msgstr "Ok" #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89 #: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431 #: install_steps_interactive.pm:836 interactive.pm:120 interactive.pm:437 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/stdio.pm:39 interactive/stdio.pm:142 #: printer/printerdrake.pm:3859 standalone/drakautoinst:215 #: standalone/drakbackup:1361 standalone/drakbackup:4024 #: standalone/drakbackup:4028 standalone/drakbackup:4083 #: standalone/drakbackup:4453 standalone/drakconnect:157 #: standalone/drakconnect:937 standalone/drakconnect:1029 #: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739 #: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176 #: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497 #: ugtk2.pm:899 #, c-format msgid "Cancel" msgstr "Cancelar" #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150 #: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567 #: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284 #: standalone/drakbackup:4020 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 #: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133 #: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346 #: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "Ajuda" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Teste da configuração" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Deseja testar a configuração?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Aviso: o teste desta placa gráfica pode bloquear o seu computador" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Ocorreu um erro:\n" "%s\n" "Tente mudar alguns parâmetros" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "A sair em %d segundos" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "É esta a configuração correcta?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Disposição do teclado: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Tipo de rato: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Dispositivo do rato: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitor Actualização Horizontal: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitor Actualização Vertical: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Placa Gráfica: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Memória gráfica: %s kB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Profundidade da cor: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Resolução: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Controlador Xorg: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Interface gráfico no arranque" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "O computador pode ser configurado para iniciar automaticamente o interface " "gráfico (Xorg) após arrancar.\n" "Deseja que o Xorg seja iniciado quando reiniciar?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "A sua placa gráfica parece ter uma saída TV-OUT.\n" "Pode ser configurada para funcionar usando o frame-buffer.\n" "\n" "Para isso tem que ligar a sua placa à TV antes de arrancar o seu " "computador.\n" "Então escolha a entrada \"TVout\" no carregador de arranque\n" "\n" "Tem esta característica?" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "Que norma usa a sua TV?" #: Xconfig/xfree.pm:648 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" "_:proporção de aspecto estranho\n" "outro" #: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376 #: standalone/service_harddrake:208 #, c-format msgid "Please wait" msgstr "Por favor aguarde" #: any.pm:142 #, c-format msgid "Bootloader installation in progress" msgstr "Instalação do carregador de arranque em progresso" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "O LILO quer atribuir um novo ID de Volume ao dispositivo %s. No entanto,\n" "se mudar o ID de Volume do Windows NT, 2000, ou do disco de arranque XP,\n" "pode causar um erro fatal no Windows. Esta precaução não se aplica ao\n" "Windows 95 ou 98. ou aos discos NT.\n" "\n" "Atribuir um novo ID de Volume?" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "" "Instalação do carregador de arranque falhada. Ocorreram os seguintes erros:" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Pode precisar mudar o seu dispositivo de arranque Open\n" " Firmware para activar o carregador de arranque. Se não vê\n" " a prompt do carregador de arranque ao reiniciar, mantenha\n" " carregado o Comando-Opção-O-F ao reiniciar e digite:\n" " setenv boot-device %s,\\\\:tbxi\n" " Depois digite: shut-down\n" " No próximo arranque deve ver a prompt do carregador de arranque." #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Decidiu instalar o carregador de arranque numa partição.\n" "Isto implica que já tem um carregador de arranque no disco que arranca\n" "(ex: System Commander).\n" "\n" "Em que dispositivo está a arrancar?" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Primeiro sector do disco (MBR)" #: any.pm:232 #, c-format msgid "First sector of the root partition" msgstr "Primeiro sector da partição de raiz" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "Na Disquete" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4180 #, c-format msgid "Skip" msgstr "Saltar" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "Instalação LILO/grub" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Onde deseja instalar o carregador de arranque?" #: any.pm:267 standalone/drakboot:269 #, c-format msgid "Boot Style Configuration" msgstr "Configuração do Estilo de Arranque" #: any.pm:269 any.pm:270 any.pm:303 any.pm:304 #, c-format msgid "Bootloader main options" msgstr "Principais opções do carregador de arranque" #: any.pm:275 #, c-format msgid "Give the ram size in MB" msgstr "Indicar o tamanho da RAM em MB" #: any.pm:277 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha" #: any.pm:278 any.pm:615 authentication.pm:192 #, c-format msgid "The passwords do not match" msgstr "As senhas não correspondem" #: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1335 #, c-format msgid "Please try again" msgstr "Por favor tente novamente" #: any.pm:283 any.pm:308 #, c-format msgid "Bootloader to use" msgstr "Carregador de arranque a usar" #: any.pm:285 any.pm:310 #, c-format msgid "Boot device" msgstr "Dispositivo de arranque" #: any.pm:287 #, c-format msgid "Delay before booting default image" msgstr "Atraso antes de arrancar a imagem predefinida" #: any.pm:288 #, c-format msgid "Enable ACPI" msgstr "Activar ACPI" #: any.pm:290 #, c-format msgid "Force no APIC" msgstr "Forçar sem APIC" #: any.pm:292 #, c-format msgid "Force No Local APIC" msgstr "Forçar Sem APIC Local" #: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:585 printer/printerdrake.pm:1867 #: printer/printerdrake.pm:1988 standalone/drakbackup:1639 #: standalone/drakbackup:3615 standalone/drakups:299 #, c-format msgid "Password" msgstr "Senha" #: any.pm:295 any.pm:651 authentication.pm:198 #, c-format msgid "Password (again)" msgstr "Senha (novamente)" #: any.pm:296 #, c-format msgid "Restrict command line options" msgstr "Restringir opções da linha de comando" #: any.pm:296 #, c-format msgid "restrict" msgstr "restringir" #: any.pm:298 #, c-format msgid "Clean /tmp at each boot" msgstr "Limpar /tmp a cada arranque" #: any.pm:299 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Tamanho da RAM exacto se necessário (%d MB encontrados)" #: any.pm:309 #, c-format msgid "Init Message" msgstr "Mensagem Init" #: any.pm:311 #, c-format msgid "Open Firmware Delay" msgstr "Atraso Open Firmware" #: any.pm:312 #, c-format msgid "Kernel Boot Timeout" msgstr "Intervalo de Arranque do Kernel" #: any.pm:313 #, c-format msgid "Enable CD Boot?" msgstr "Activar Arranque de CD?" #: any.pm:314 #, c-format msgid "Enable OF Boot?" msgstr "Activar Arranque OF?" #: any.pm:315 #, c-format msgid "Default OS?" msgstr "OS predefinido?" #: any.pm:369 #, c-format msgid "Image" msgstr "Imagem" #: any.pm:370 any.pm:380 #, c-format msgid "Root" msgstr "Root" #: any.pm:371 any.pm:393 #, c-format msgid "Append" msgstr "Adicionar" #: any.pm:373 standalone/drakboot:271 standalone/drakboot:275 #, c-format msgid "Video mode" msgstr "Modo Vídeo" #: any.pm:375 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:376 #, c-format msgid "Network profile" msgstr "Perfil de rede" #: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:449 #, c-format msgid "Label" msgstr "Rótulo" #: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093 #: standalone/draksec:52 #, c-format msgid "Default" msgstr "Predefinido" #: any.pm:394 #, c-format msgid "Initrd-size" msgstr "Tamanho Initrd" #: any.pm:396 #, c-format msgid "NoVideo" msgstr "Sem Vídeo" #: any.pm:407 #, c-format msgid "Empty label not allowed" msgstr "Não é permitido um rótulo vazio" #: any.pm:408 #, c-format msgid "You must specify a kernel image" msgstr "Deve especificar uma imagem Kernel" #: any.pm:408 #, c-format msgid "You must specify a root partition" msgstr "Deve especificar uma partição de raiz" #: any.pm:409 #, c-format msgid "This label is already used" msgstr "Este rótulo já está a ser usado" #: any.pm:423 #, c-format msgid "Which type of entry do you want to add?" msgstr "Que tipo de entrada deseja adicionar?" #: any.pm:424 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:424 #, c-format msgid "Other OS (SunOS...)" msgstr "Outro OS (SunOS...)" #: any.pm:425 #, c-format msgid "Other OS (MacOS...)" msgstr "Outro OS (MacOS...)" #: any.pm:425 #, c-format msgid "Other OS (Windows...)" msgstr "Outro OS (Windows...)" #: any.pm:453 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Aqui estão as entradas do menu de arranque até agora.\n" "Pode criar entradas adicionais ou mudar as existentes." #: any.pm:601 #, c-format msgid "access to X programs" msgstr "acesso aos programas X" #: any.pm:602 #, c-format msgid "access to rpm tools" msgstr "acesso às ferramentas rpm" #: any.pm:603 #, c-format msgid "allow \"su\"" msgstr "permitir \"su\"" #: any.pm:604 #, c-format msgid "access to administrative files" msgstr "acesso aos ficheiros administrativos" #: any.pm:605 #, c-format msgid "access to network tools" msgstr "acesso às ferramentas de rede" #: any.pm:606 #, c-format msgid "access to compilation tools" msgstr "acesso às ferramentas de compilação" #: any.pm:611 #, c-format msgid "(already added %s)" msgstr "(já adicionado %s)" #: any.pm:616 #, c-format msgid "This password is too simple" msgstr "Essa senha é demasiado simples" #: any.pm:617 #, c-format msgid "Please give a user name" msgstr "Por favor indique um nome de utilizador" #: any.pm:618 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "O nome de utilizador deve conter apenas letras minúsculas, números, `-' e `_'" #: any.pm:619 #, c-format msgid "The user name is too long" msgstr "O nome de utilizador é demasiado longo" #: any.pm:620 #, c-format msgid "This user name has already been added" msgstr "Este nome de utilizador já foi adicionado" #: any.pm:621 any.pm:653 #, c-format msgid "User ID" msgstr "ID Utilizador" #: any.pm:622 any.pm:654 #, c-format msgid "Group ID" msgstr "ID Grupo" #: any.pm:625 #, c-format msgid "%s must be a number" msgstr "%s deve ser um número" #: any.pm:626 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "%s devia ser acima dos 500. Aceitar na mesma?" #: any.pm:631 standalone/draksambashare:1216 #, c-format msgid "Add user" msgstr "Adicionar utilizador" #: any.pm:633 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Introduza um utilizador\n" "%s" #: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:4987 #: standalone/drakbackup:2813 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Pronto" #: any.pm:637 help.pm:51 #, c-format msgid "Accept user" msgstr "Aceitar utilizador" #: any.pm:648 #, c-format msgid "Real name" msgstr "Nome real" #: any.pm:649 standalone/drakbackup:1634 #, c-format msgid "Login name" msgstr "Nome de autenticação" #: any.pm:652 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:656 #, c-format msgid "Icon" msgstr "Ícone" #: any.pm:703 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Auto-autenticar" #: any.pm:704 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Pode configurar o computador para autenticar automaticamente num utilizador." #: any.pm:705 #, c-format msgid "Use this feature" msgstr "Usar esta opção" #: any.pm:706 #, c-format msgid "Choose the default user:" msgstr "Escolha o utilizador predefinido:" #: any.pm:707 #, c-format msgid "Choose the window manager to run:" msgstr "Escolha o gestor de janelas a executar:" #: any.pm:719 any.pm:787 #, c-format msgid "Please choose a language to use." msgstr "Por favor escolha a linguagem a usar." #: any.pm:720 any.pm:788 #, c-format msgid "Language choice" msgstr "Escolha da linguagem" #: any.pm:748 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "O Mandriva Linux pode suportar várias linguagens. Seleccione\n" "as linguagens que deseja instalar. Irão estar disponíveis quando\n" "terminar a instalação e reiniciar o seu sistema." #: any.pm:751 #, c-format msgid "Multi languages" msgstr "Múltiplas linguagens" #: any.pm:767 any.pm:796 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Usar Unicode por omissão" #: any.pm:768 help.pm:647 #, c-format msgid "All languages" msgstr "Todas as linguagens" #: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:957 #, c-format msgid "Country / Region" msgstr "País / Região" #: any.pm:844 #, c-format msgid "Please choose your country." msgstr "Por favor escolha o seu país." #: any.pm:846 #, c-format msgid "Here is the full list of available countries" msgstr "Aqui está a lista completa dos países disponíveis" #: any.pm:847 #, c-format msgid "Other Countries" msgstr "Outros Países" #: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:397 #, c-format msgid "Advanced" msgstr "Avançado" #: any.pm:855 #, c-format msgid "Input method:" msgstr "Método de entrada:" #: any.pm:858 install_any.pm:422 network/netconnect.pm:318 #: network/netconnect.pm:323 network/netconnect.pm:1238 network/wireless.pm:7 #: printer/printerdrake.pm:105 #, c-format msgid "None" msgstr "Nenhum" #: any.pm:975 #, c-format msgid "No sharing" msgstr "Não partilhar" #: any.pm:975 #, c-format msgid "Allow all users" msgstr "Permitir todos os utilizadores" #: any.pm:979 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Deseja permitir aos utilizadores partilhar algumas dos seus directórios?\n" "Ao permitir isto, os utilizadores só têm que clicar em \"Partilhar\" no " "konqueror e nautilus.\n" "\n" "\"Personalizado\" permite escolher a cada utilizador.\n" #: any.pm:991 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: o sistema de partilha de ficheiros tradicional do Unix, com menos " "suporte em Mac e Windows." #: any.pm:994 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: um sistema de partilha de ficheiros usado pelo Windows, Mac OS X e " "muitos sistemas Linux modernos." #: any.pm:1002 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "Pode exportar com NFS ou SMB. Por favor escolha qual deseja usar." #: any.pm:1027 #, c-format msgid "Launch userdrake" msgstr "Executar userdrake" #: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065 #: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067 #: printer/printerdrake.pm:5305 standalone/drakTermServ:294 #: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499 #: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85 #: standalone/draknfs:210 standalone/net_monitor:117 #: standalone/printerdrake:583 #, c-format msgid "Close" msgstr "Fechar" #: any.pm:1029 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "A partilha do utilizador normal usa o grupo \"fileshare\". \n" "Pode usar o userdrake para adicionar um utilizador a este grupo." #: authentication.pm:23 #, c-format msgid "Local file" msgstr "Ficheiro local" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:26 #, c-format msgid "Smart Card" msgstr "Cartão Smart" #: authentication.pm:27 authentication.pm:163 #, c-format msgid "Windows Domain" msgstr "Domínio Windows" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "Directório Activo com SFU" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "Directório Activo com Winbind" #: authentication.pm:66 #, c-format msgid "Local file:" msgstr "Ficheiro local:" #: authentication.pm:66 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" "Usar local para todas as autenticações e informações dadas pelo utilizador " "no ficheiro local" #: authentication.pm:67 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:67 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" "Indica ao seu computador para usar LDAP para algumas ou todas as " "autenticações. O LDAP consolida certos tipos de informação na sua " "organização." #: authentication.pm:68 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:68 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" "Permite-lhe correr um grupo de computadores no mesmo domínio de Serviços de " "Informação de Rede com uma senha comum e um ficheiro de grupo." #: authentication.pm:69 #, c-format msgid "Windows Domain:" msgstr "Domínio Windows:" #: authentication.pm:69 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "O Winbind permite ao sistema obter informação e autenticar utilizadores num " "domínio Windows." #: authentication.pm:70 #, c-format msgid "Active Directory with SFU:" msgstr "Directório Activo com SFU:" #: authentication.pm:70 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "" "Com o Kerberos e o Ldap para autenticar no Servidor Activo do Directório " #: authentication.pm:71 #, c-format msgid "Active Directory with Winbind:" msgstr "Directório Activo com Winbind:" #: authentication.pm:71 #, c-format msgid "" "Winbind allows the system to authenticate users in a Windows Active " "Directory Server." msgstr "" "O Winbind permite ao sistema autenticar utilizadores no Servidor Activo de " "Directório windows." #: authentication.pm:96 #, c-format msgid "Authentication LDAP" msgstr "Autenticação LDAP" #: authentication.pm:97 #, c-format msgid "LDAP Base dn" msgstr "dn de base LDAP" #: authentication.pm:98 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "Servidor LDAP" #: authentication.pm:111 fsedit.pm:23 #, c-format msgid "simple" msgstr "simples" #: authentication.pm:112 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:113 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:114 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "disposição de segurança (SASL/Kerberos)" #: authentication.pm:121 authentication.pm:159 #, c-format msgid "Authentication Active Directory" msgstr "Autenticação do Directório Activo" #: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Domínio" #: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:82 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Servidor" #: authentication.pm:125 #, c-format msgid "LDAP users database" msgstr "Base de Dados dos utilizadores LDAP" #: authentication.pm:126 #, c-format msgid "Use Anonymous BIND " msgstr "Usar BIND Anónimo" #: authentication.pm:127 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "Utilizador LDAP autorizado a navegar no Directório Activo" #: authentication.pm:128 #, c-format msgid "Password for user" msgstr "Senha para utilizador" #: authentication.pm:140 #, c-format msgid "Authentication NIS" msgstr "Autenticação NIS" #: authentication.pm:141 #, c-format msgid "NIS Domain" msgstr "Domínio NIS" #: authentication.pm:142 #, c-format msgid "NIS Server" msgstr "Servidor NIS" #: authentication.pm:147 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Para que isto funcione para um W2K PDC, irá provavelmente precisar de ter o " "administrador a executar: C:\\>net grupolocal \"Pre-Windows 2000 Acesso " "Compatível\" todos /add e reinicie o servidor.\n" "Irá também precisar do nome/senha de um Administrador de Domínio para juntar " "a máquina ao domínio Windows(TM).\n" "Se a rede ainda não está activada, o DrakX irá tentar juntar-se ao domínio a " "seguir ao passo da configuração da rede.\n" "Se este passo falhar por alguma razão e a autenticação no domínio não " "funcionar, execute 'smbpasswd -j DOMÍNIO -U UTILIZADOR%%SENHA' usando o seu " "Domínio Windows (TM), e o Nome/Senha do Admin, depois do arranque do " "sistema.\n" "O comando 'wbinfo -t' irá testar se os segredos da sua autenticação estão " "bem." #: authentication.pm:159 #, c-format msgid "Authentication Windows Domain" msgstr "Autenticação do Domínio Windows" #: authentication.pm:161 #, c-format msgid "Active Directory Realm " msgstr "Directório Activo Realm " #: authentication.pm:164 #, c-format msgid "Domain Admin User Name" msgstr "Nome do Utilizador/Administrador do Domínio" #: authentication.pm:165 #, c-format msgid "Domain Admin Password" msgstr "Senha de Admin do Domínio" #: authentication.pm:181 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" "Define a senha de administrador (root) e os métodos de autenticação da rede" #: authentication.pm:182 #, c-format msgid "Set administrator (root) password" msgstr "Definir a senha do administrador (root)" #: authentication.pm:183 standalone/drakvpn:1111 #, c-format msgid "Authentication method" msgstr "Método de autenticação" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:188 help.pm:722 #, c-format msgid "No password" msgstr "Nenhuma senha" #: authentication.pm:194 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Essa senha é demasiado simples (pelo menos deve ter %d caracteres)" #: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "Autenticação" #: authentication.pm:331 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Não foi possível usar 'broadcast' sem um domínio NIS" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:765 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Bem-vindo ao menu de escolha do sistema operativo!\n" "\n" "Escolha um sistema operativo da lista em cima ou\n" "espere pelo arranque predefinido.\n" "\n" #: bootloader.pm:906 #, c-format msgid "LILO with graphical menu" msgstr "LILO com lista gráfica" #: bootloader.pm:907 #, c-format msgid "LILO with text menu" msgstr "LILO com menu texto" #: bootloader.pm:908 #, c-format msgid "GRUB with graphical menu" msgstr "GRUB com menu gráfico" #: bootloader.pm:909 #, c-format msgid "GRUB with text menu" msgstr "GRUB com menu texto" #: bootloader.pm:910 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:987 #, c-format msgid "not enough room in /boot" msgstr "não há espaço suficiente em /boot" #: bootloader.pm:1480 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Não pode instalar o carregador de arranque numa partição %s\n" #: bootloader.pm:1520 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "A configuração do seu carregador de arranque deve ser actualizada pois a " "partição foi renumerada" #: bootloader.pm:1533 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "O carregador de arranque não pode ser instalado correctamente. Tem de " "arrancar usar em modo de emergência e escolher \"%s\"" #: bootloader.pm:1534 #, c-format msgid "Re-install Boot Loader" msgstr "Reinstalar o carregador de arranque" #: common.pm:131 #, c-format msgid "KB" msgstr "KB" #: common.pm:131 #, c-format msgid "MB" msgstr "MB" #: common.pm:131 #, c-format msgid "GB" msgstr "GB" #: common.pm:139 #, c-format msgid "TB" msgstr "TB" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "%d minutos" #: common.pm:149 #, c-format msgid "1 minute" msgstr "1 minuto" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "%d segundos" #: common.pm:257 #, c-format msgid "kdesu missing" msgstr "kdesu em falta" #: common.pm:260 #, c-format msgid "consolehelper missing" msgstr "ajuda da consola em falta" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "Áustria" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Austrália" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "Bélgica" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "Brasil" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "Canadá" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 #: network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "Suíça" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "Costa Rica" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "República Checa" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "Alemanha" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "Dinamarca" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "Estónia" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 #: network/adsl_consts.pm:770 network/adsl_consts.pm:781 #: network/adsl_consts.pm:792 network/adsl_consts.pm:801 #: network/adsl_consts.pm:810 network/adsl_consts.pm:819 #: network/adsl_consts.pm:828 network/adsl_consts.pm:837 #: network/adsl_consts.pm:846 network/adsl_consts.pm:855 #: network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "Espanha" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "Finlândia" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:41 #, c-format msgid "France" msgstr "França" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "Grécia" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "Hungria" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Irlanda" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "Israel" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Itália" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "Japão" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "Holanda" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "Noruega" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "Nova Zelândia" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "Polónia" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "Portugal" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "Rússia" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "Suécia" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "Eslovaquia" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "Tailândia" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "Taiwan" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "África do Sul" #: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "Estados Unidos" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "O WebDAV é um protocolo que lhe permite montar um directório de um\n" "servidor web localmente, e trata-lo como um sistema de ficheiros local\n" "(desde que o servidor web esteja configurado como um servidor WebDAV).\n" "Se deseja adicionar pontos de montagem WebDAV, seleccione \"Novo\"." #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Novo" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:455 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "Desmontar" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:452 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "Montar" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 #: diskdrake/interactive.pm:678 diskdrake/interactive.pm:697 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "Ponto de Montagem" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Por favor escolha o URL do servidor WebDAV" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "O Url deve começar com http:// ou https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Servidor: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:522 #: diskdrake/interactive.pm:1217 diskdrake/interactive.pm:1295 #, c-format msgid "Mount point: " msgstr "Ponto de montagem: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1302 #, c-format msgid "Options: %s" msgstr "Opções: %s" #: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292 #: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62 #: install_interactive.pm:216 install_interactive.pm:222 #: install_interactive.pm:275 install_interactive.pm:280 #: install_steps_interactive.pm:278 install_steps_interactive.pm:342 #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Particionar" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "Por favor faça primeiro um backup dos seus dados" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Se planear usar o aboot, lembre-se de deixar espaço livre (2048 sectores é " "suficiente)\n" "no início do disco" #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "Assistente" #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "Escolher acção" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Tem uma partição Microsoft Windows grande.\n" "Sugiro que redimensione primeiro esta partição\n" "(clique nela, depois clique em \"Redimensionar\")" #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "Por favor clique numa partição" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457 #: standalone/drakbackup:3065 standalone/drakbackup:3125 #, c-format msgid "Details" msgstr "Detalhes" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "Nenhum disco rígido encontrado" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "Journalised FS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "Janelas" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1232 #, c-format msgid "Empty" msgstr "Vazio" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "Tipos de sistemas de ficheiros:" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "Use ``%s'' em vez de" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:471 #, c-format msgid "Create" msgstr "Criar" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:624 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "Tipo" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:456 #: standalone/drakperm:123 standalone/printerdrake:248 #, c-format msgid "Delete" msgstr "Apagar" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "Use ``Desmontar'' primeiro" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "Escolha outra partição" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "Escolha uma partição" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "Sair" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "Anular" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "Alternar para modo normal" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "Alternar para modo perito" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "Continuar mesmo assim?" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "Sair sem gravar" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "Sair sem escrever a tabela de partições?" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Quer gravar as modificações de /etc/fstab?" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:342 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Precisa reiniciar para que as modificações na tabela de partições tenham " "efeito" #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "Deve formatar a partição %s!\n" "Senão nenhuma entrada para o ponto de montagem %s será escrita no fstab.\n" "Desistir na mesma?" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "Limpar tudo" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Auto alocar" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:123 #, c-format msgid "More" msgstr "Mais" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "Informação dos discos rígidos" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "Todas as partições primárias estão usadas" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "Não posso adicionar mais partições" #: diskdrake/interactive.pm:351 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Para ter mais partições, por favor elimine uma para poder criar uma partição " "extendida" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "Sem supermount" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "Supermount" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "Supermount exceptado para CDROM" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "Gravar a tabela de partições" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Restaurar tabela de partições" #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Reparar a tabela de partições" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Recarregar a tabela de partições" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "Automontagem das médias amovíveis" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "Seleccione ficheiro" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "O backup da tabela de partições não tem o mesmo tamanho.\n" "Continuar mesmo assim?" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "A tentar salvar a tabela de partições" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "Informação detalhada" #: diskdrake/interactive.pm:450 diskdrake/interactive.pm:768 #, c-format msgid "Resize" msgstr "Redimensionar" #: diskdrake/interactive.pm:451 #, c-format msgid "Format" msgstr "Formatar" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to RAID" msgstr "Adicionar ao RAID" #: diskdrake/interactive.pm:454 #, c-format msgid "Add to LVM" msgstr "Adicionar ao LVM" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from RAID" msgstr "Remover do RAID" #: diskdrake/interactive.pm:458 #, c-format msgid "Remove from LVM" msgstr "Remover do LVM" #: diskdrake/interactive.pm:459 #, c-format msgid "Modify RAID" msgstr "Modificar RAID" #: diskdrake/interactive.pm:460 #, c-format msgid "Use for loopback" msgstr "Usar para loopback" #: diskdrake/interactive.pm:515 #, c-format msgid "Create a new partition" msgstr "Criar uma nova partição" #: diskdrake/interactive.pm:518 #, c-format msgid "Start sector: " msgstr "Sector inicial: " #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:937 #, c-format msgid "Size in MB: " msgstr "Tamanho em MB: " #: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938 #, c-format msgid "Filesystem type: " msgstr "Tipo do Sistema de Ficheiros: " #: diskdrake/interactive.pm:526 #, c-format msgid "Preference: " msgstr "Preferência: " #: diskdrake/interactive.pm:529 #, c-format msgid "Logical volume name " msgstr "Nome do Volume Lógico " #: diskdrake/interactive.pm:559 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Não pode criar uma nova partição\n" "(porque atingiu o numero máximo de partições primárias).\n" "Primeiro remova uma partição primária e crie uma partição extendida." #: diskdrake/interactive.pm:589 #, c-format msgid "Remove the loopback file?" msgstr "Remover o ficheiro loopback?" #: diskdrake/interactive.pm:608 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Após alterar o tipo de partição %s, todos os dados desta partição serão " "perdidos" #: diskdrake/interactive.pm:620 #, c-format msgid "Change partition type" msgstr "Alterar tipo de partição" #: diskdrake/interactive.pm:621 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Que sistema de ficheiros deseja?" #: diskdrake/interactive.pm:629 #, c-format msgid "Switching from ext2 to ext3" msgstr "Mudar de ext2 para ext3" #: diskdrake/interactive.pm:649 #, c-format msgid "Which volume label?" msgstr "Que nome do volume?" #: diskdrake/interactive.pm:665 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Onde deseja montar o ficheiro loopback %s?" #: diskdrake/interactive.pm:666 #, c-format msgid "Where do you want to mount device %s?" msgstr "Onde deseja montar o dispositivo %s?" #: diskdrake/interactive.pm:671 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Não posso desconfigurar o ponto de montagem enquanto a\n" "partição for usada para loopback. Remova o loopback primeiro" #: diskdrake/interactive.pm:696 #, c-format msgid "Where do you want to mount %s?" msgstr "Onde deseja montar %s?" #: diskdrake/interactive.pm:720 diskdrake/interactive.pm:799 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "A redimensionar" #: diskdrake/interactive.pm:720 #, c-format msgid "Computing FAT filesystem bounds" msgstr "A computar os limites do sistema de ficheiros FAT" #: diskdrake/interactive.pm:756 #, c-format msgid "This partition is not resizeable" msgstr "Esta partição não é redimensionável" #: diskdrake/interactive.pm:761 #, c-format msgid "All data on this partition should be backed-up" msgstr "Todos os dados desta partição devem ser arquivados (backup)" #: diskdrake/interactive.pm:763 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Após redimensionar a partição %s, todos os dados da partição serão perdidos" #: diskdrake/interactive.pm:768 #, c-format msgid "Choose the new size" msgstr "Escolha o novo tamanho" #: diskdrake/interactive.pm:769 #, c-format msgid "New size in MB: " msgstr "Novo tamanho em MB: " #: diskdrake/interactive.pm:810 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Microsoft Windows®" msgstr "" "Para assegurar a integridade dos dados depois de redimensionar\n" "a(s) partiçõe(s), a verificação do sistema de ficheiros irá ser\n" "executada no próximo arranque no Windows(TM)" #: diskdrake/interactive.pm:851 #, c-format msgid "Choose an existing RAID to add to" msgstr "Escolha um RAID existente para adicionar" #: diskdrake/interactive.pm:853 diskdrake/interactive.pm:870 #, c-format msgid "new" msgstr "novo" #: diskdrake/interactive.pm:868 #, c-format msgid "Choose an existing LVM to add to" msgstr "Escolha um LVM existente para adicionar" #: diskdrake/interactive.pm:874 #, c-format msgid "LVM name?" msgstr "Nome do LVM?" #: diskdrake/interactive.pm:902 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" "O volume físico %s ainda está em uso.\n" "Deseja remover as extensões físicas usadas neste volume para outros volumes?" #: diskdrake/interactive.pm:904 #, c-format msgid "Moving physical extents" msgstr "A mover extensões físicas" #: diskdrake/interactive.pm:922 #, c-format msgid "This partition can not be used for loopback" msgstr "Esta partição não pode ser usada para loopback" #: diskdrake/interactive.pm:935 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:936 #, c-format msgid "Loopback file name: " msgstr "Nome do ficheiro loopback: " #: diskdrake/interactive.pm:941 #, c-format msgid "Give a file name" msgstr "Indique um nome de ficheiro" #: diskdrake/interactive.pm:944 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "O ficheiro já está usado por outro loopback, escolha outro" #: diskdrake/interactive.pm:945 #, c-format msgid "File already exists. Use it?" msgstr "O ficheiro já existe. Deseja usá-lo?" #: diskdrake/interactive.pm:968 #, c-format msgid "Mount options" msgstr "Opções de montagem" #: diskdrake/interactive.pm:975 #, c-format msgid "Various" msgstr "Diversos" #: diskdrake/interactive.pm:1043 #, c-format msgid "device" msgstr "dispositivo" #: diskdrake/interactive.pm:1044 #, c-format msgid "level" msgstr "nível" #: diskdrake/interactive.pm:1045 #, c-format msgid "chunk size in KiB" msgstr "tamanho do bloco em KiB" #: diskdrake/interactive.pm:1062 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Cuidado: esta operação é perigosa." #: diskdrake/interactive.pm:1077 #, c-format msgid "What type of partitioning?" msgstr "Que tipo de particionamento?" #: diskdrake/interactive.pm:1115 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Precisa reiniciar antes que as modificações tenham efeito" #: diskdrake/interactive.pm:1124 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "A tabela de partições do controlador %s irá ser escrita no disco!" #: diskdrake/interactive.pm:1147 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Após formatar a partição %s, todos os dados serão perdidos" #: diskdrake/interactive.pm:1163 #, c-format msgid "Move files to the new partition" msgstr "Mover ficheiros para a nova partição" #: diskdrake/interactive.pm:1163 standalone/draksambashare:81 #: standalone/draksambashare:144 #, c-format msgid "Hide files" msgstr "Esconder ficheiros" #: diskdrake/interactive.pm:1164 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "O directório %s já contém dados\n" "(%s)" #: diskdrake/interactive.pm:1175 #, c-format msgid "Moving files to the new partition" msgstr "A mover os ficheiros para a nova partição" #: diskdrake/interactive.pm:1179 #, c-format msgid "Copying %s" msgstr "A copiar %s" #: diskdrake/interactive.pm:1183 #, c-format msgid "Removing %s" msgstr "A remover %s" #: diskdrake/interactive.pm:1197 #, c-format msgid "partition %s is now known as %s" msgstr "a partição %s é agora conhecida como %s" #: diskdrake/interactive.pm:1198 #, c-format msgid "Partitions have been renumbered: " msgstr "As partições foram renúmeradas: " #: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1280 #, c-format msgid "Device: " msgstr "Dispositivo: " #: diskdrake/interactive.pm:1219 #, c-format msgid "Devfs name: " msgstr "Nome devfs: " #: diskdrake/interactive.pm:1220 #, c-format msgid "Volume label: " msgstr "Etiqueta do Volume:" #: diskdrake/interactive.pm:1221 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Letra do controlador DOS: %s (apenas um palpite)\n" #: diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1234 #: diskdrake/interactive.pm:1298 #, c-format msgid "Type: " msgstr "Tipo: " #: diskdrake/interactive.pm:1229 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "Nome: " #: diskdrake/interactive.pm:1236 #, c-format msgid "Start: sector %s\n" msgstr "Inicio: sector: %s\n" #: diskdrake/interactive.pm:1237 #, c-format msgid "Size: %s" msgstr "Tamanho: %s" #: diskdrake/interactive.pm:1239 #, c-format msgid ", %s sectors" msgstr ", %s sectores" #: diskdrake/interactive.pm:1241 #, c-format msgid "Cylinder %d to %d\n" msgstr "Cilindro %d para %d\n" #: diskdrake/interactive.pm:1242 #, c-format msgid "Number of logical extents: %d\n" msgstr "Número de extensões lógicas: %d\n" #: diskdrake/interactive.pm:1243 #, c-format msgid "Formatted\n" msgstr "Formatado\n" #: diskdrake/interactive.pm:1244 #, c-format msgid "Not formatted\n" msgstr "Não formatado\n" #: diskdrake/interactive.pm:1245 #, c-format msgid "Mounted\n" msgstr "Montado\n" #: diskdrake/interactive.pm:1246 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1251 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Ficheiro(s) loopback:\n" " %s\n" #: diskdrake/interactive.pm:1252 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partição de arranque por omissão\n" " (para arranque MS-DOS, não para lilo)\n" #: diskdrake/interactive.pm:1254 #, c-format msgid "Level %s\n" msgstr "Nível %s\n" #: diskdrake/interactive.pm:1255 #, c-format msgid "Chunk size %d KiB\n" msgstr "Tamanho do bloco %d KiB\n" #: diskdrake/interactive.pm:1256 #, c-format msgid "RAID-disks %s\n" msgstr "Discos RAID %s\n" #: diskdrake/interactive.pm:1258 #, c-format msgid "Loopback file name: %s" msgstr "Nome do ficheiro loopback: %s" #: diskdrake/interactive.pm:1261 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "A possibilidade é, esta partição\n" "ser uma partição Controladora.\n" "Recomenda-se que não se mexa.\n" #: diskdrake/interactive.pm:1264 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Esta partição especial\n" "Bootstrap é para\n" "arranque dual do sistema.\n" #: diskdrake/interactive.pm:1281 #, c-format msgid "Read-only" msgstr "Apenas Leitura" #: diskdrake/interactive.pm:1282 #, c-format msgid "Size: %s\n" msgstr "Tamanho: %s\n" #: diskdrake/interactive.pm:1283 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometria: %s cilindros, %s cabeças, %s sectores\n" #: diskdrake/interactive.pm:1284 network/thirdparty.pm:331 #, c-format msgid "Info: " msgstr "Info: " #: diskdrake/interactive.pm:1285 #, c-format msgid "LVM-disks %s\n" msgstr "Discos LVM %s\n" #: diskdrake/interactive.pm:1286 #, c-format msgid "Partition table type: %s\n" msgstr "Tipo da tabela de partições: %s\n" #: diskdrake/interactive.pm:1287 #, c-format msgid "on channel %d id %d\n" msgstr "no canal %d id %d\n" #: diskdrake/interactive.pm:1330 #, c-format msgid "Filesystem encryption key" msgstr "Senha de encriptação do sistema de ficheiros" #: diskdrake/interactive.pm:1331 #, c-format msgid "Choose your filesystem encryption key" msgstr "Escolha a sua senha de encriptação do sistema de ficheiros" #: diskdrake/interactive.pm:1334 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Esta senha de encriptação é demasiado simples (pelo menos deve ter %d " "caracteres de comprimento)" #: diskdrake/interactive.pm:1335 #, c-format msgid "The encryption keys do not match" msgstr "As senhas de encriptação não correspondem" #: diskdrake/interactive.pm:1338 network/netconnect.pm:1074 #: standalone/drakconnect:419 standalone/drakroam:120 #, c-format msgid "Encryption key" msgstr "Senha de encriptação" #: diskdrake/interactive.pm:1339 #, c-format msgid "Encryption key (again)" msgstr "Senha de encriptação (novamente)" #: diskdrake/interactive.pm:1341 standalone/drakvpn:1017 #: standalone/drakvpn:1102 #, c-format msgid "Encryption algorithm" msgstr "Algoritmo de encriptação" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Alterar tipo" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "Não é possível autenticar com o nome de utilizador %s (senha errada?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Autenticação do Domínio Requerida" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Que nome de utilizador" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Mais outro" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Por favor indique o seu nome de utilizador, senha e nome de domínio para " "aceder a este servidor." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614 #, c-format msgid "Username" msgstr "Nome de utilizador" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Procurar servidores" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Procurar novos servidores" #: do_pkgs.pm:16 do_pkgs.pm:49 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "O pacote %s precisa ser instalado. Deseja-o instalar?" #: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925 #, c-format msgid "Could not install the %s package!" msgstr "Não foi possível instalar o pacote %s !" #: do_pkgs.pm:24 do_pkgs.pm:57 #, c-format msgid "Mandatory package %s is missing" msgstr "O pacote imperativo %s está em falta" #: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1313 #: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472 #: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494 #: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930 #: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924 #: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307 #: printer/printerdrake.pm:5464 standalone/drakTermServ:326 #: standalone/drakTermServ:1205 standalone/drakTermServ:1266 #: standalone/drakTermServ:1935 standalone/drakbackup:510 #: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224 #: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390 #: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527 #: standalone/localedrake:43 standalone/scannerdrake:51 #: standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Aviso" #: do_pkgs.pm:35 standalone/harddrake2:527 #, c-format msgid "The following packages need to be installed:\n" msgstr "Os seguintes pacotes precisam ser instalados:\n" #: do_pkgs.pm:205 #, c-format msgid "Installing packages..." msgstr "A instalar pacotes..." #: do_pkgs.pm:252 #, c-format msgid "Removing packages..." msgstr "A remover pacotes..." #: fs/format.pm:58 fs/format.pm:65 #, c-format msgid "Formatting partition %s" msgstr "A formatar a partição %s" #: fs/format.pm:62 #, c-format msgid "Creating and formatting file %s" msgstr "A criar e formatar ficheiro %s" #: fs/format.pm:115 #, c-format msgid "I do not know how to format %s in type %s" msgstr "Não sei como formatar %s no tipo %s" #: fs/format.pm:120 fs/format.pm:122 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatação de %s falhada" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "Montagens circulares %s\n" #: fs/mount.pm:74 #, c-format msgid "Mounting partition %s" msgstr "A montar partição %s" #: fs/mount.pm:75 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "montagem da partição %s no directório %s falhada" #: fs/mount.pm:80 fs/mount.pm:97 #, c-format msgid "Checking %s" msgstr "A verificar %s" #: fs/mount.pm:113 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "erro ao desmontar %s: %s" #: fs/mount.pm:142 #, c-format msgid "Enabling swap partition %s" msgstr "A activar a partição swap %s" #: fs/mount_options.pm:113 #, c-format msgid "Use an encrypted file system" msgstr "Usar um sistema de ficheiros encriptado" #: fs/mount_options.pm:115 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" "Activar registo da quota do grupo no disco e opcionalmente reforçar os " "limites" #: fs/mount_options.pm:117 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Não actualiza os tempos de acesso no inode neste sistema de ficheiros\n" "(ex. para um acesso mais rápido à fila de notícias para acelerar os " "servidores de noticias)." #: fs/mount_options.pm:120 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Pode apenas ser montado explicitamente (ou seja, a opção -a\n" "não faz com que o sistema de ficheiros seja montado)." #: fs/mount_options.pm:123 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Não interprete os caracteres ou blocos dos dispositivos especiais no sistema " "de ficheiros." #: fs/mount_options.pm:125 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Não permite a execução de binários no sistema de ficheiros montado.\n" "Esta opção pode ser útil para um servidor que tem um sistema de ficheiros\n" "que contém binários para outras arquitecturas que não a própria." #: fs/mount_options.pm:129 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Não permite aos bits set-user-identifier ou set-group-identifier\n" "terem efeito. (Isto parece seguro, mas de facto é pouco seguro\n" "se tem o suidperl(1) instalado.)" #: fs/mount_options.pm:133 #, c-format msgid "Mount the file system read-only." msgstr "Montar o sistema de ficheiros em apenas leitura." #: fs/mount_options.pm:135 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" "Todos as E/S do sistema de ficheiros devem ser feitas sincronizadamente." #: fs/mount_options.pm:139 #, c-format msgid "Allow an ordinary user to mount the file system." msgstr "Permitir a um utilizador normal montar o sistema de ficheiros." #: fs/mount_options.pm:141 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" "Activar contagem da quota do disco do utilizador, e opcionalmente reforçar " "os limites" #: fs/mount_options.pm:143 #, c-format msgid "Support user. extended attributes" msgstr "Suportar atributos utilizador. extendidos" #: fs/mount_options.pm:145 #, c-format msgid "Give write access to ordinary users" msgstr "Dar acesso de escrita a utilizadores normais" #: fs/mount_options.pm:147 #, c-format msgid "Give read-only access to ordinary users" msgstr "Dar acesso de apenas-leitura a utilizadores normais" #: fs/type.pm:363 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Não pode usar JFS em partições menores que 16MB" #: fs/type.pm:364 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Não pode usar ReiserFS em partições menores que 32MB" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "com /usr" #: fsedit.pm:32 #, c-format msgid "server" msgstr "servidor" #: fsedit.pm:218 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Não foi possível ler a tabela de partição de %s, está demasiado corrompida:\n" "Pode-se tentar continuar, a apagar as partições corrompidas (TODOS OS\n" "DADOS serão perdidos!). A outra solução é não deixar o DrakX modificar\n" "a tabela de partições. (o erro é %s)\n" "\n" "Concorda em perder todas as partições?\n" #: fsedit.pm:382 #, c-format msgid "Mount points must begin with a leading /" msgstr "Os pontos de montagem devem começar com uma /" #: fsedit.pm:383 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Os pontos de montagem devem apenas conter caracteres alfanuméricos" #: fsedit.pm:384 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Já existe uma partição no ponto de montagem %s\n" #: fsedit.pm:388 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Seleccionou uma partição RAID como root (/).\n" "Nenhum carregador de arranque a consegue aceder sem uma\n" "partição /boot. Certifique-se que adiciona uma partição /boot" #: fsedit.pm:394 #, c-format msgid "" "You can not use the LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" "Não pode usar Volumes Lógicos LVM para pontos de montagem %s já que atrasa " "os volumes físicos" #: fsedit.pm:396 #, c-format msgid "" "You've selected the LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" "Seleccionou um Volume Lógico LVM como raiz (/).\n" "O carregador de arranque não o consegue gerir quando o volume atrasa volumes " "físicos.\n" "Deve criar primeiro uma partição de arranque /boot" #: fsedit.pm:400 fsedit.pm:402 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Esta directoria deve permanecer dentro do sistema de ficheiros root" #: fsedit.pm:404 fsedit.pm:406 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Precisa de um verdadeiro sistema de ficheiros (ext2/ext3, ReiserFS, xfs ou " "JFS) para este ponto de montagem\n" #: fsedit.pm:408 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" "Não pode usar um sistema de ficheiros encriptado para ponto de montagem %s" #: fsedit.pm:469 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Sem espaço livre suficiente para auto-alocação" #: fsedit.pm:471 #, c-format msgid "Nothing to do" msgstr "Nada a fazer" #: harddrake/data.pm:62 install_any.pm:1710 #, c-format msgid "Floppy" msgstr "Disquete" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:88 install_any.pm:1711 #, c-format msgid "Hard Disk" msgstr "Disco" #: harddrake/data.pm:97 install_any.pm:1712 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "Gravadores CD/DVD" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:127 standalone/drakbackup:2055 #, c-format msgid "Tape" msgstr "Cassete" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "Placa de Vídeo" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "Placa DVB" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "Placa de TV" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "Outros dispositivos Multimédia" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "Placa de Som" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "Webcam" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "Processadores" #: harddrake/data.pm:209 #, c-format msgid "ISDN adapters" msgstr "Adaptadores ISDN" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "Dispositivos de som USB" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "Placa de rádio" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "Placas de rede ATM" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "Placas de rede WAN" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "Dispositivos bluetooth" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "Placa Ethernet" #: harddrake/data.pm:282 network/netconnect.pm:493 #, c-format msgid "Modem" msgstr "Modem" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "Adaptadores ADSL" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "Memória" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "Controladores AGP" #: harddrake/data.pm:324 help.pm:186 help.pm:855 #: install_steps_interactive.pm:989 #, c-format msgid "Printer" msgstr "Impressora" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "Controladores de portas de jogos" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "Joystick" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "Controladores SATA" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "Controladores RAID" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "Controladores (E)IDE/ATA" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "Controladores Firewire" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "Controladores PCMCIA" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "Controladores SCSI" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "Controladores USB" #: harddrake/data.pm:420 #, c-format msgid "USB ports" msgstr "Portas USB" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "Controladores SMBus" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "Pontes e controladores do sistema" #: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119 #: install_steps_interactive.pm:949 standalone/finish-install:37 #: standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "Teclado" #: harddrake/data.pm:462 #, c-format msgid "Tablet and touchscreen" msgstr "Tabuleiro e touchscreen" #: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:982 #, c-format msgid "Mouse" msgstr "Rato" #: harddrake/data.pm:485 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:494 #, c-format msgid "Scanner" msgstr "Digitalizador" #: harddrake/data.pm:504 standalone/harddrake2:476 #, c-format msgid "Unknown/Others" msgstr "Desconhecido/Outros" #: harddrake/data.pm:532 #, c-format msgid "cpu # " msgstr "processador # " #: harddrake/sound.pm:192 standalone/drakconnect:162 #: standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Por favor aguarde... A aplicar a configuração" #: harddrake/sound.pm:229 #, c-format msgid "No alternative driver" msgstr "Nenhum controlador alternativo" #: harddrake/sound.pm:230 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Não há nenhum controlador alternativo OSS/ALSA conhecido para a sua placa de " "som (%s) que actualmente usa \"%s\"" #: harddrake/sound.pm:236 #, c-format msgid "Sound configuration" msgstr "Configuração do Som" #: harddrake/sound.pm:238 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Aqui pode seleccionar um controlador alternativo (seja OSS ou ALSA) para a " "sua placa de som (%s)" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:243 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "A sua placa actualmente usa o controlador %s\"%s\" (o controlador " "predefinido para a sua placa é o \"%s\")" #: harddrake/sound.pm:245 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) era o primeiro som API. É um som API de um OS " "independente (está disponivel na maior parte dos sistemas Unix) mas é um API " "muito básico\n" "e limitado. Ainda mais, todos os controladores OSS reinventaram a roda.\n" "\n" "ALSA (Advanced Linux Sound Architecture) é uma arquitectura modularizada\n" "que suporta um grande numero de placas ISA, USB e PCI.\n" "\n" "Também fornece um API mais elevado que um OSS.\n" "\n" "Para usar alsa, um pode também usar:\n" "- o antigo API de compatibilidade OSS\n" "- o novo API ALSA que fornece muitas funções melhoradas mas requer o uso da " "livraria ALSA.\n" #: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Controlador:" #: harddrake/sound.pm:267 #, c-format msgid "Trouble shooting" msgstr "Correcção de problemas" #: harddrake/sound.pm:275 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "O antigo controlador \"%s\" está na lista negra.\n" "\n" "Foi indicado que provoca erros no kernel ao descarregar.\n" "\n" "O novo controlador \"%s\" irá apenas ser usado no próximo arranque." #: harddrake/sound.pm:283 #, c-format msgid "No open source driver" msgstr "Nenhum controlador open source" #: harddrake/sound.pm:284 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Não há nenhum controlador grátis para a sua placa de som (%s), mas existe um " "controlador apropriado em \"%s\"." #: harddrake/sound.pm:287 #, c-format msgid "No known driver" msgstr "Nenhum controlador conhecido" #: harddrake/sound.pm:288 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Não há nenhum controlador conhecido para a sua placa de som (%s)" #: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838 #, c-format msgid "Unknown driver" msgstr "Controlador desconhecido" #: harddrake/sound.pm:293 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Erro: o controlador \"%s\" para a sua placa de som não está listado" #: harddrake/sound.pm:307 #, c-format msgid "Sound trouble shooting" msgstr "Correcção de problemas de som" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:310 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "O teste clássico a fazer em caso de problemas de som é:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" diz-lhe que controlador a sua placa usa\n" "por omissão\n" "\n" "- \"grep sound-slot /etc/modules.conf\" diz-lhe que controlador\n" "actualmente usa\n" "\n" "- \"/sbin/lsmod\" permite-lhe verificar se o seu módulo controlador)\n" "está carregado ou não\n" "\n" "- \"/sbin/chkconfig --list sound\" e \"/sbin/chkconfig --list alsa\" diz-" "lhe\n" "se os serviços sound e alsa estão configurados para ser lançados no\n" "initlevel 3\n" "\n" "- \"aumix -q\" diz-lhe se o volume de som está 'mudo' ou não\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" diz-lhe que programa a placa de som usa.\n" #: harddrake/sound.pm:336 #, c-format msgid "Let me pick any driver" msgstr "Deixa escolher qualquer controlador" #: harddrake/sound.pm:339 #, c-format msgid "Choosing an arbitrary driver" msgstr "A escolher arbitrariamente um controlador" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:342 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Se realmente acha que sabe que controlador é o apropriado para a sua placa\n" "pode escolher um da lista seguinte.\n" "\n" "O controlador actual para a sua placa de som \"%s\" é \"%s\" " #: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65 #: standalone/net_applet:67 #, c-format msgid "Auto-detect" msgstr "Auto-detectar" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "Desconhecido|Genérico" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Desconhecido|CPH05X (bt878) [muitos fabricantes]" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Desconhecido|CPH06X (bt878) [muitos fabricantes]" #: harddrake/v4l.pm:404 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Para a maioria das placas TV modernas, o modulo bttv do kernel GNU/Linux " "auto detecta os parametros certos.\n" "Se a sua placa não é detectada, aqui pode forçar os correctos sintonizadores " "e tipos de de placa. Escolha os seus parâmetros de placa de tv se necessário." #: harddrake/v4l.pm:407 #, c-format msgid "Card model:" msgstr "Modelo da Placa:" #: harddrake/v4l.pm:408 #, c-format msgid "Tuner type:" msgstr "Tipo de Sintonisador:" #: harddrake/v4l.pm:409 #, c-format msgid "Number of capture buffers:" msgstr "Número de buffers de captura :" #: harddrake/v4l.pm:409 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "Número de buffers de captura para captura mmapeada" #: harddrake/v4l.pm:411 #, c-format msgid "PLL setting:" msgstr "Configuração PLL :" #: harddrake/v4l.pm:412 #, c-format msgid "Radio support:" msgstr "Suporte de rádio :" #: harddrake/v4l.pm:412 #, c-format msgid "enable radio support" msgstr "activar o suporte de rádio" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Antes de continuar, deve ler atentamente os termos da licença. A licença\n" "cobre toda a distribuição Mandriva Linux. Se concorda com todos os termos\n" "presentes, active a caixa \"%s\". Se não, pode clicar no botão \"%s\"\n" "para reiniciar o seu computador." #: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:740 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "Aceitar" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux é um sistema multi-utilizador, o que significa que cada " "utilizador\n" "tem as suas próprias preferências, ficheiros e por aí a fora. Mas ao invés\n" "do root, que é o administrador do sistema, os utilizadores que adiciona\n" "neste ponto não serão autorizador a fazer qualquer mudança, excepto os\n" "seus próprios ficheiros e configurações, protegendo o sistema de mudanças\n" "desintencionais ou maliciosas que poderiam ter impacto. Vai ter que criar\n" "pelo menos um utilizador regular para si próprio -- esta é a conta que pode\n" "usar por rotina, no dia-à-dia. Contudo é muito fácil entrar como root,\n" "para fazer o que quer que seja, pode também ser muito perigoso! Um\n" "simples erro pode significar que o seu sistema não volte a trabalhar.\n" "Se cometer um erro sério como utilizador regular, o pior que pode\n" "acontecer, é que possa perder alguma informação, mas não afectará\n" "todo o sistema.\n" "\n" "O primeiro campo pergunta por um nome real. Claro que não é imperativo\n" "-- realmente até pode digitar o que quiser. O DrakX irá usar a primeira\n" "palavra que digitar neste campo e copiá-la para este campo \"%s\",\n" "que é o nome que este utilizador irá digitar para fazer se autenticar no\n" "sistema. O próximo passo é para digitar uma senha. De um posto de vista\n" "seguro, uma senha de um utilizador não privilegiado (regular) não é crucial\n" "como uma senha \"root\", mas não há razão para negligenciar a senha\n" "fazendo-a demasiado simples, ou simplesmente deixar em branco: claro\n" "que seriam os seus ficheiros que ficariam em risco.\n" "\n" "Assim que clicar em \"%s\",pode adicionar outros utilizadores. Adicionar\n" "um utilizador para cada um dos seus amigos, o seu pai, a sua irmã, etc.\n" "Clique em \"%s\" sempre que acabar de adicionar um utilizador.\n" "Ao clicar em \"%s\" permite-lhe mudar a \"shell\" predefinida para esse\n" "utilizador (bash por omissão).\n" "\n" "Quando terminar de adicionar utilizadores, será-lhe dado a escolher um\n" "utilizador que entrará automáticamente no sistema quando o computador\n" "arrancar. Se está interessado nessa opção (e não se importa com a\n" "segurança local), escolha o utilizador desejado e o gestor de janelas,\n" "depois clique em \"%s\".\n" "Se não está interessado nesta opção, desmarque a caixa \"%s\"." #: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987 #: standalone/draksambashare:60 #, c-format msgid "User name" msgstr "Nome de utilizador" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 #: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321 #: network/thirdparty.pm:385 printer/printerdrake.pm:3861 #: standalone/drakTermServ:384 standalone/drakbackup:4074 #: standalone/drakbackup:4168 standalone/drakbackup:4185 #: standalone/drakbackup:4203 ugtk2.pm:490 #, c-format msgid "Next" msgstr "Próximo" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Deseja usar esta opção?" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Aqui estão listadas partições Linux existentes detectadas no seu disco.\n" "Pode manter as escolhas feitas pelo assistente, desde que sejam boas\n" "para a maioria das instalações comuns. Se fizer alguma alteração, tem\n" "que pelo menos definir uma partição root (\"/\"). Não escolha uma partição\n" "demasiado pequena ou não será capaz de instalar todo o software.\n" "Se quiser guardar os seus dados numa partição separada, irá também\n" "precisar de criar uma partição \"/home\" (apenas possível se tiver mais\n" "do que uma parição Linux disponível).\n" "\n" "Cada partição é listada como se segue: \"Nome\", \"Capacidade\".\n" "\n" "O \"Nome\" está estruturado: \"tipo do dispositivo do disco\", \"número do\n" "dispositivo\", \"número da partição\" (por exemplo, \"hda1\").\n" "\n" "\"O tipo do dispositivo do disco\" é \"hd\" se o controlador do disco for\n" "um dispositivo IDE e \"sd\" se for um dispositivo SCSI.\n" "\n" "\"O número do dispositivo do disco\" é sempre uma letra a seguir a \"hd\"\n" "ou \"sd\". Para os dispositivos IDE:\n" "\n" " * \"a\" significa \"dispositivo principal (master) do disco no primeiro\n" "controlador IDE\";\n" "\n" " * \"b\" significa \"dispositivo secundário (slave) do disco no primeiro\n" "controlador IDE\";\n" "\n" " * \"c\" significa \"dispositivo principal (master) do disco no segundo\n" "controlador IDE\";\n" "\n" " * \"d\" significa \"dispositivo secundário (slave) do disco no segundo\n" "controlador IDE\".\n" "\n" "Com os dispositivos SCSI, um \"a\" significa \"ID SCSI mais baixo\", um\n" "\"b\" significa \"ID SCSI segundo mais baixo\", etc." #: help.pm:85 #, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "A instalação Mandriva Linux é distribuída em vários CD-ROMs. Se um pacote\n" "seleccionado estiver localizado noutro CD-ROM, o DrakX irá ejectar o actual\n" "CD e pedir para inserir o CD pedido. Se não tiver o CD em questão à mão,\n" "clique apenas em \"%s\", os pacote correspondentes não será instalados." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make " "it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "É agora tempo de especificar que programas deseja instalar no seu\n" "sistema. Há centenas de pacotes disponíveis para o Mandriva Linux, e para\n" " simplificar a gestão, foram colocados em grupos de aplicações similares.\n" "\n" "O Mandriva Linux classifica os grupos de pacotes em quatro categorias.\n" "Pode misturar e combinar aplicações de várias categorias, para que a\n" "instalação de uma ``Estação de trabalho'' possa ainda ter aplicações da\n" "categoria ``Servidor'' instaladas.\n" "\n" " * \"%s\": se planeia usar a sua máquina como uma estação de trabalho,\n" "escolha um ou mais dos grupos dessa mesma categoria.\n" "\n" " * \"%s\": se planeia usar a sua máquina para programar, seleccione os\n" "grupos apropriados dentro dessa categoria. O grupo especial \"LSB\" irá\n" "configurar o seu sistema para que cumpra o mais possível com as \n" "especificações Linux Standard Base.\n" "\n" " Ao seleccionar o grupo \"LSB\" irá também instalar as séries kernel \"2.4" "\",\n" "em vez do \"2.6\" predefinido. Isto é para garantir concordância 100%%- LSB\n" "do sistema. No entanto, se não seleccionar o grupo \"LSB\", terá na mesma\n" "um sistema que é 100%% LSB-concordante.\n" "\n" " * \"%s\": se pretende que a sua máquina seja um servidor, seleccione\n" "qual dos serviços comuns deseja instalar.\n" "\n" " * \"%s\": aqui é onde irá escolher o seu ambiente gráfico preferido. Pelo\n" " menos deve ser seleccionado se deseja ter um interface gráfico disponível.\n" "\n" "Movendo o cursor do rato sobre o nome de um grupo, irá mostrar um breve\n" "texto explanatório acerca desse grupo.\n" "\n" "Pode seleccionar a caixa \"%s\", que é útil se está familiarizado com os\n" "pacotes oferecidos ou se quer ter controle total sobre o que é instalado.\n" "\n" "Se iniciar a instalação em modo \"%s\", pode desseleccionar todos os\n" "grupos e prevenir a instalação de novos pacotes. Isto é útil para reparar\n" "ou actualizar um sistema existente.\n" "\n" "Se desseleccionar todos os grupos quando executa uma instalação regular\n" "(em oposição a uma actualização), um diálogo irá aparecer a sugestionar\n" "opções diferentes para uma instalação mínima:\n" "\n" " * \"%s\": instala o número mínimo de pacotes possíveis para ter um\n" "ambiente gráfico instalado.\n" "\n" " * \"%s\": instala o sistema base mais utilidades básicas e a sua\n" "documentação. Esta instalação é apropriada para configurar um servidor.\n" "\n" " * \"%s\": irá instalar o número mínimo absoluto de pacotes necessários\n" "para ter um sistema Linux funcional. Com esta instalação irá apenas ter um\n" "interface de linha de comandos. O tamanho total desta instalação é cerca\n" "de 65 megabytes." #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "Estação de Trabalho" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 #: share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "Desenvolvimento" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "Ambiente Gráfico" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648 #, c-format msgid "Individual package selection" msgstr "Selecção individual de pacotes" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Actualizar" #: help.pm:146 install_steps_interactive.pm:606 #, c-format msgid "With X" msgstr "Com X" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "Com documentação básica" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Verdadeira instalação mínima" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "Se escolheu instalar pacotes individualmente, o instalador irá apresentar\n" "uma árvore contendo todos os pacotes classificados por grupos e subgrupos.\n" "Enquanto pesquisa na árvore, pode seleccionar grupos inteiros, subgrupos,\n" "ou pacotes individuais.\n" "\n" "Sempre que seleccionar um pacote na árvore, uma descrição irá aparecer\n" "à sua direita para o informar acerca do propósito desse pacote.\n" "\n" "!! Se um pacote servidor foi seleccionado, ou porque escolheu\n" "especificamente o pacote individual ou porque fazia parte de um grupo de\n" "pacotes, será-lhe pedido para confirmar que realmente quer que esses\n" "servidores sejam instalados. Por omissão o Mandriva Linux irá\n" "automaticamente iniciar qualquer serviço instalado no arranque. Mesmo\n" "que sejam seguros e não tenham qualquer problema conhecido na altura\n" "da saída da distribuição, é bem possível que sejam descobertos 'buracos'\n" "na segurança a seguir à finalização desta versão Mandriva Linux. Se não\n" "souber que serviço particular é suposto fazer ou porque é instalado, então\n" "clique em \"%s\". Ao clicar em \"%s\" irá instalar os serviços listados e\n" "serºao iniciados automaticamente no arranque. !!\n" "\n" "A opção \"%s\" é usada para desactivar o dialogo de aviso que\n" "aparece sempre que o instalador escolhe automaticamente um pacote\n" "para resolver problemas de dependências. alguns pacotes dependem de\n" "outros e a instalação de um determinado pacote pode requerer a instalação\n" "de outro pacote. O instalador pode determinar que pacotes são necessários\n" "para satisfazer uma dependência para terminar com sucesso a instalação.\n" "\n" "O pequeno ícone de disquete no fundo desta lista permite-lhe carregar uma\n" "lista de pacotes escolhida durante uma instalação anterior. Isto é útil se\n" "tiver um número de máquinas que deseja configurar identicamente. Ao\n" "clicar neste ícone irá-lhe pedir para inserir uma disquete criada no fim\n" "de outra instalação. Veja a segunda dica do último passo sobre como criar\n" "essa disquete." #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613 #: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "No" msgstr "Não" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161 #: modules/interactive.pm:71 printer/printerdrake.pm:883 #: printer/printerdrake.pm:898 standalone/drakbackup:2613 #: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156 #, c-format msgid "Yes" msgstr "Sim" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "Dependências automáticas" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": ao clicar no botão \"%s\"irá iniciar o assistente de configuração " "de\n" "impressoras. Consulte o capítulo correspondente no ''Guia do Utilizador''\n" "para obter mais informações sobre como configurar uma nova impressora.\n" "O interface apresentado no nosso manual é semelhante ao usado durante\n" "a instalação." #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595 #: standalone/drakbackup:2437 standalone/drakbackup:2441 #: standalone/drakbackup:2445 standalone/drakbackup:2449 #: standalone/drakroam:227 #, c-format msgid "Configure" msgstr "Configurar" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Este diálogo é usado para escolher que serviços deseja iniciar no arranque.\n" "\n" "O DrakX irá listar todos os serviços disponíveis na actual instalação\n" "Reveja cada um deles cuidadosamente e desmarque aqueles que não são\n" "necessários no arranque.\n" "\n" "Um breve texto de introdução será mostrado acerca do serviço quando\n" "este é seleccionado. No entanto, se não tem certeza se o serviço é útil\n" "ou não, é mais seguro deixa-lo como estava.\n" "\n" "!! Nesta altura, tenha muito cuidado se deseja usar a sua máquina como\n" "um servidor: provavelmente não quererá iniciar qualquer serviço que\n" "não conheça. Por favor lembre-se que alguns serviços podem ser\n" "perigosos se forem activados num servidor. Em geral, seleccione\n" "apenas aqueles servque realmente precisa. !!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" "O GNU/Linux gere o tempo em GMT (Greenwich Mean Time) e traduz em\n" "hora local conforme a zona que escolheu. Se o relógio da sua motherboard\n" "estiver definido para hora local, pode desactivar isto ao desseleccionar \n" "\"%s\", que dará indicação ao GNU/Linux que o relógio do sistema e o de\n" "hardware estão no mesmo fuso horário. Isto revela-se útil quando a\n" "máquina 'opera' outro sistema operativo.\n" "\n" "A opção \"%s\" irá regular automaticamente o relógio do sistema ao\n" "ligar-se a um servidor horário remoto na Internet. Para esta opção\n" "funcionar, tem de ter uma ligação à internet activa. Recomendamos que\n" "escolha um servidor horário localizado perto de si. Na realidade, esta\n" "opção instala um servidor horário que poderá ser usado por outras\n" "máquinas na sua rede local." #: help.pm:217 install_steps_interactive.pm:884 #, c-format msgid "Hardware clock set to GMT" msgstr "Relógio do hardware definido na hora GMT" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "Sincronização automática da hora" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Placa Gráfica\n" "\n" " Normalmente o instalador detecta e configura automáticamente \n" "a placa gráfica instalada na sua máquina. Se isto não é correcto,\n" "pode escolher da lista a placa que tem instalada.\n" "\n" " Na caso caso de existirem vários servidores disponíveis para a sua " "placa,\n" "com ou sem aceleração 3D, ser-lhe-á pedido que escolha o servidor\n" "que melhor sirva as suas necessidades." #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "X (para Sistema X Window) é o coração do interface gráfico GNU/Linux no\n" "qual todos os ambientes gráficos (KDE, GNOME, AfterStep, WindowMaker,\n" "etc.) fornecidos com o Mandriva Linux, funcionam.\n" "\n" "Irá ver uma lista de parâmetros diferentes para mudar, para poder\n" "ter uma boa apresentação gráfica\n" "\n" "Placa Gráfica\n" "\n" " O instalador irá normalmente detectar e configurar automaticamente\n" "a placa gráfica da sua máquina. Se isto não estiver correcto, pode\n" "escolher da lista a placa gráfica que tem instalada.\n" "\n" " Se na situação de haver diferentes servidores disponíveis para a sua\n" "placa, com ou sem aceleração 3D, será-lhe dado a escolher o servidor\n" "que melhor sirva as suas necessidades\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normalmente o instalador irá automáticamente detectar e configurar o\n" "ecrã/monitor ligado á sua máquina. Se não estiver correcto, pode escolher\n" "da lista o monitor que está ligado ao seu computador.\n" "\n" "\n" "\n" "Resolução\n" "\n" " Aqui pode escolher as resoluções e cores disponíveis para o seu\n" "hardware gráfico. Escolha o que melhor sirva as suas necessidades\n" "(poderá fazer alterações a seguir à instalação)\n" "Um exemplo da configuração escolhida é mostrada no ecrã.\n" "\n" "\n" "\n" "Teste\n" "\n" " Dependendo do seu hardware, esta entrada poderá não apareder.\n" "\n" " S sistema irá tentar abrir um ecrã gráfico na resolução escolhida.\n" "Se conseguir ver a mensagem teste durante o teste e responder \"%s\",\n" "então o DrakX irá proceder á etapa seguinte. Se não o vir, então\n" "significa que alguma parte da configuração auto detectada está\n" "incorrecta e o teste irá acabar automáticamente ao fim de 12 segundos,\n" "e retornará ao menu. Mude as configurações até obtenha a correcta\n" "disposição gráfica.\n" "\n" "\n" "\n" "Opções\n" "\n" " Aqui pode escolher se deseja que o computador arranque\n" "automáticamente em modo gráfico. De facto, pode querer verificar\n" "\"%s\" se a sua máquina é um servidor, ou se não consegui obter\n" "uma boa configuração do ecrã." #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Monitor\n" "\n" " Normalmente o instalador detectar e configurar automaticamente o\n" "monitor ligado à sua máquina. Se não estiver correcto, pode escolher desta\n" "lista o monitor que está ligado ao computador." #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Resolução\n" "\n" " Aqui pode escolher uma resolução e uma profundidade de cor entre as\n" "disponíveis para o seu hardware. Escolha a que melhor se adapta às\n" "suas necessidades (poderá, no entanto, alterar após a instalação). Uma\n" "amostra da configuração escolhida será apresentada no monitor." #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "Na situação, onde há diferentes servidores disponíveis para a sua placa,\n" "com ou sem aceleração 3D, é-lhe pedido que escolha o servidor que\n" "melhor sirva as suas necessidades." #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "Opções\n" "\n" " Este passo permite-lhe escolher se quer que a sua máquina " "automáticamente\n" "mude para um interface gráfico ao arrancar. Obviamente, pode querer " "seleccionar\n" "\"%s\" se a sua máquina está para agir como um servidor, ou se não foi bem\n" "sucedido a configurar o monitor." #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, " "choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "Agora precisa decidir onde deseja instalar o sistema operativo\n" "Mandriva Linux no seu disco rígido. Se o seu disco rígido estiver vazio\n" "ou, se um sistema operativo existente usa todo o espaço disponível,\n" "irá ser preciso particionar o disco. Básicamente, particionar um disco\n" "rígido significa dividi-lo de maneira lógica para criar o espaço\n" "necessário para instalar o seu novo sistema Mandriva Linux.\n" "\n" "Como os efeitos da operação de particionamento são geralmente\n" "irreversíveis, e pode levar a perda de dados, particionar pode ser\n" "intimidante para um utilizador inexperiente. Felizmente, o DrakX tem\n" "um assistente que simplifica o processo.Antes de avançar para o\n" "próximo passo lê pelo resto da secção e todo o resto, leve o tempo\n" "que achar necessário.\n" "\n" "Dependendo da configuração do disco rígido, várias opções\n" "estão disponíveis.\n" "\n" " * \"%s\". Esta opção irá automaticamente particionar o(s) disco(s)\n" "vazio(s). Se usar esta opção, não irão haver mais perguntas.\n" "\n" " * \"%s\". O assistente detectou uma ou mais partições Linux no disco\n" "rígido. Se as deseja usar, escolha esta opção. Será-lhe então pedido\n" "para escolher o ponto de montagem associado a cada partição. Os\n" "pontos habituais de montagem são seleccionados por omissão, e para\n" " a maioria é uma boa ideia mantê-los assim.\n" "\n" " * \"%s\". Se a Microsoft Windows é instalada no seu disco rígido e \n" "utiliza todo o espaço disponível, irá ter que criar espaço livre para o\n" "GNU/Linux. Para o fazer, pode apagar a sua partição Microsoft Windows\n" "e dados (ver a solução ``Apagar o disco todo'') ou redimensionar a partição\n" "FAT ou NTFS do Microsoft Windows. O redimensionamento pode ser feito\n" "sem a perda de qualquer dado, desde que préviamente tenha desfragmentado\n" "a partição Windows. Recomenda-se que faça cópias de segurança.\n" "Recomenda-se que use esta opção, se quer usar os dois sistemas\n" "operativos, Mandriva Linux e Microsoft Windows no mesmo computador.\n" "\n" " Antes de escolher esta opção, por favor compreenda que a seguir a este\n" "procedimento, o tamanho da partição do seu Microsoft Windows será mais\n" "pequeno. Terá menos espaço livre no Microsoft windows para gravar os\n" "seus dados ou instalar novo software.\n" "\n" " * \"%s\". Se deseja apagar todos os dados e todas as partições presentes\n" "no disco rígido e substituí-los pelo seu novo sistema Mandriva Linux,\n" "escolha esta opção. Seja cuidadoso, porque não será mais capaz de\n" "desfazer esta operação após ter confirmado.\n" "\n" " !! Se escolher esta opção, todos os dados no disco serão apagados!!\n" "\n" " * \"%s\": Esta opção aparece quando o disco rígido é inteiramente do\n" "sistema Microsoft Windows. Escolher esta opção irá simplesmente apagar\n" "tudo no disco e começar de novo a particionar tudo do princípio.\n" "\n" " !! Se escolher esta opção, todos os dados no disco vai ser perdidos. !!\n" "\n" " * \"%s\". Escolha esta opção se deseja particionar manualmente o seu\n" "disco rígido. Tenha cuidado -- é uma opção potente mas perigosa e pode\n" "muito facilmente perder todos os seus dados. É por isso que esta opção\n" "é apenas recomendada a alguém que já tenha feito alguma coisa parecida\n" "anteriormente e tenha alguma experiência. Para mais instruções em como\n" "usar a utilidade DiskDrake, refira-se à secção ``Gerir as suas partições''\n" "no ``Guia de Instalação''." #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Usar espaço livre" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Usar partição existente" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Microsoft Windows® partition" msgstr "Usar o espaço livre na partição Windows" #: help.pm:374 #, c-format msgid "Erase entire disk" msgstr "Apagar disco inteiro" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Remover Windows" #: help.pm:374 install_interactive.pm:232 #, c-format msgid "Custom disk partitioning" msgstr "Particionamento de disco personalizado" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "Parabéns, a instalação está agora completa e o seu sistema GNU/Linux\n" "está pronto a ser usado. Clique em \"%s\" para reiniciar o sistema.\n" "Não se esqueça de remover a media de instalação (CD-ROM ou disquete).\n" "A primeira coisa que deve ver a seguir ao computador acabar os testes\n" "de hardware, é o menu do carregador de arranque, dando-lhe a opção\n" "de escolher qual o sistema operativo a iniciar.\n" "\n" "O botão \"%s\" mostra mais dois botões para:\n" "\n" " * \"%s\": permite-lhe criar uma disquete de instalação que irá\n" "automáticamente executar uma instalação completa sem a ajuda de\n" "um operador similar ao da instalação que ainda agora configurou.\n" "\n" " Note que duas opções diferentes são disponíveis depois de clicar\n" "naquele botão:\n" "\n" " * \"%s\". Isto é uma instalação parcial automática. O passo de\n" "particionar é o único procedimento interactivo.\n" "\n" " * \"%s\". Instalação completamente automática: o disco rígido\n" "é completamente reescrito, todos os dados serão perdidos.\n" "\n" " Esta opção é muito prática para instalar várias máquinas similares.\n" "Veja a secção Auto Instalação no nosso sítio web para mais\n" "informações.\n" "\n" " * \"%s\"(*): grava uma lista de pacotes seleccionados na instalação.\n" "Para usar esta selecção com outra instalação, insira uma disquete\n" "e inicie a instalação. Na linha de comandos, prima a tecla [F1],\n" "digite >>linux defcfg=\"floppy\"<< e prima a tecla [Enter].\n" "\n" "(*) Precisa de uma disquete formatada FAT. Para criar uma em GNU/Linux,\n" "digite \"mformat a:\", ou \"fdformat /dev/fd0\" seguido de \"mkfs.vfat\n" "/dev/fd0\"." #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "Gerar disquete auto-instal" #: help.pm:409 install_steps_interactive.pm:1339 #, c-format msgid "Replay" msgstr "Repetir" #: help.pm:409 install_steps_interactive.pm:1339 #, c-format msgid "Automated" msgstr "Automática" #: help.pm:409 install_steps_interactive.pm:1342 #, c-format msgid "Save packages selection" msgstr "Gravar selecção de pacotes" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "Se escolher usar algumas partições GNU/Linux, pode querer formatar\n" "algumas delas e apagar os dados nelas contidos. Para o fazer, por favor\n" "escolha essas partições.\n" "\n" "Por favor note que não é necessário formatar todas a partições já\n" "existentes. Tem que formatar as partições que tenham sistemas\n" "operativos (tais como \"/\", \"/usr\" ou \"/var\") mas não tem que\n" "formatar partições que contenham dados que deseja manter\n" "(tipicamente \"/home\").\n" "\n" "Por favor tenha atenção quando seleccionar as partições. A seguir à\n" "formatação estar completa, todos os dados nas partições seleccionadas\n" "serão perdidos e não será capaz de os recuperar.\n" "\n" "Clique em \"%s\" quando estiver pronto para formatar as partições.\n" "\n" "Clique em \"%s\" se deseja escolher outra partição para o seu novo\n" "sistema operativo Mandriva Linux.\n" "\n" "Clique em \"%s\" se deseja escolher partições para verificar se\n" "fisicamente há blocos defeituosos (\"bad blocks\") no disco." #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437 #: interactive/newt.pm:318 printer/printerdrake.pm:3859 #: standalone/drakTermServ:363 standalone/drakbackup:4037 #: standalone/drakbackup:4073 standalone/drakbackup:4184 #: standalone/drakbackup:4199 ugtk2.pm:488 #, c-format msgid "Previous" msgstr "Anterior" #: help.pm:434 #, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "No momento que instala o Mandriva Linux, é quase certo que alguns\n" "pacotes terão sido actualizados desde a distribuição inicial. Alguns\n" "erros podem ter sido corrigidos, e problemas de segurança resolvidos.\n" "Para lhe permitir beneficiar destas actualizações, está agora apto a fazer\n" "a transferi-las da Internet. Escolha \"%s\" se tem uma ligação Internet\n" "activa, ou \"%s\" se preferir instalar os pacotes actualizados mais tarde.\n" "\n" "Escolhendo \"%s\" mostra uma lista das localizações web de onde as\n" "actualizações podem ser transferidas. Deve escolher a que estiver\n" "mais perto de si. Irá aparecer uma selecção de pacotes em árvore:\n" "reveja a selecção, e clique em \"%s\" para transferir e instalar os\n" "pacotes seleccionados, ou clique em \"%s\" para abortar." #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 #: install_steps_interactive.pm:157 #, c-format msgid "Install" msgstr "Instalar" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "Nesta fase, o DrakX irá permitir-lhe escolher o nível de segurança desejado\n" "para a sua máquina. Como regra de ouro, o nível de segurança deve ser maior\n" "quando a máquina contém informação crucial, ou quando está directamente\n" "exposta à internet. Porém, um nível de segurança superior, geralmente é\n" "obtido á custa de menos facilidade de uso/manuseamento.\n" "\n" "Se não sabe o que escolher, deixe o valor predefinido. Poderá alterá-lo\n" "mais tarde com a ferramenta draksec, que faz parte do Centro de Controlo\n" "Mandriva Linux.\n" "\n" "Preencha o campo \"%s\" com o e-mail da pessoa responsável pela\n" "segurança. As mensagens de segurança serão enviadas para esse e-mail." #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "Administrador de Segurança" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Neste fase, precisa escolher que partições vão ser utilizadas para a\n" "instalação do seu sistema Mandriva Linux. Se já foram definidas partições,\n" "seja por uma instalação anterior do GNU/Linux seja por outra ferramenta de\n" "particionamento, pode utilizar-las . Senão, precisa definir partições no\n" "disco rígido.\n" "\n" "Para criar partições, tem primeiro que escolher um disco rígido. Pode\n" "escolher o disco que quer particionar clicando em ``hda'' para o primeiro\n" "disco IDE, ``hdb'' para o segundo, ``sda'' para o primeiro disco SCSI e\n" "por aí adiante.\n" "\n" "Para particionar o disco selecionado, pode usar estas opções:\n" "\n" " * \"%s\": esta opção apaga todas as partições do disco seleccionado\n" "\n" " * \"%s\": esta opção permite criar automaticamente partições\n" "ext3 e partições swap no espaço livre do seu disco\n" "\n" "\"%s\": dá acesso para opções adicionais:\n" "\n" " * \"%s\": grava a tabela das partições para uma disquete. Útil para\n" "mais tarde recuperar a tabela das partições, se necessário. É fortemente\n" "recomendado que execute este passo.\n" "\n" " * \"%s\": permite restaurar uma tabela de partições anteriormente\n" "gravada numa disquete;\n" "\n" " * \"%s\": se a sua tabela das partições está danificada, pode-a tentar\n" "recuperar com esta opção. Por favor esteja atento e lembre-se que isto\n" "nem sempre resulta.\n" "\n" " * \"%s\": apaga todas as alterações e recarrega a tabela de partições\n" "que estava originalmente no disco.\n" "\n" " * \"%s\": desmarque esta opção para forçar os utilizadores a montar\n" "e desmontar manualmente as médias amoviveis como disquetes e CD-ROMs.\n" "\n" " * \"%s\": use esta opção se deseja usar um assistente para particionar o\n" "disco rígido. Isto é recomendado se não tem um bom conhecimento de \n" "como se faz um bom particionamento do disco.\n" "\n" " * \"%s\": use esta opção para cancelar as alterações.\n" "\n" " * \"%s\": permite acções suplementares nas partições (tipo, opções,\n" "formatar) e dá mais informações sobre o disco rígido.\n" "\n" " * \"%s\": quando tiver acabado de particionar o seu disco rígido, isto irá\n" "gravar as suas alterações no disco.\n" "\n" "Quando a definir o tamanho de uma partição, pode finalmente configurar\n" "o tamanho usando as teclas de setas do seu teclado.\n" "\n" "Nota: pode chegar a qualquer opção usando o teclado. Navegue através\n" "das partições usando as teclas [Tab] e as setas [Subir/Descer].\n" "\n" "Quando uma partição é selecionada, pode usar:\n" "\n" " * Ctrl-c para criar uma nova partição (quando escolhe uma partição vazia)\n" "\n" " * Ctrl-d para apagar uma partição\n" "\n" " * Ctrl-m para definir o ponto de montagem\n" "\n" "Para obter mais informações acerca dos diferentes tipos de sistemas de\n" "ficheiros disponíveis, por favor leia o capítulo ext2FS do ``Manual de\n" "Referência''.\n" "\n" "Se está a instalar numa máquina PPC, irá querer criar umas pequena partição\n" "de arranque HFS com pelo menos 1MB, que será usada pelo carregador de\n" "arranque yaboot. Se optar por criar uma partição maior, tipo 50MB, pode-lhe\n" "ser útil para gravar um kernel e a uma imagem ramdisk para situações de\n" "de emergência." #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "Automontagem dos dispositivos amovíveis" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Alterna entre os modos normal/perito" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Mais do que uma partição Microsoft foi detectada no seu disco rígido.\n" "Por favor escolha qual deseja redimencionar para poder instalar o seu\n" "novo sistema operativo Mandriva Linux.\n" "\n" "Cada partição é listada da seguinte maneira: \"Nome Linux\",\n" "\"Nome Windows\", \"Capacidade\".\n" "\n" "O \"Nome Linux\" é estruturado: \"tipo de disco rígido\",\n" " \"numero de disco\", \"numero da partição\" (por exemplo, \"hda1\").\n" "\n" "O \"Tipo de Disco\" é \"hd\" se o disco rígido é IDE e \"sd\" se é um\n" "disco rígido SCSI.\n" "\n" "O \"Numero de disco\" é sempre uma letra depois de \"hd\" ou \"sd\".\n" "Com os discos rígidos IDE:\n" "\n" " * \"a\" significa \"disco rígido master no controlador IDE principal\";\n" "\n" " * \"b\" significa \"disco rígido slave no controlador IDE principal\";\n" "\n" " * \"c\" significa \"disco rígido master no controlador IDE segundario\";\n" "\n" " * \"d\" significa \"disco rígido slave no controlador IDE segundario\";\n" "\n" "Com os discos rígidos SCSI, um \"a\" significa \"SCSI ID mais baixo\",\n" "um \"b\" significa \"segundo SCSI ID mais baixo\", etc.\n" "\n" "O \"nome Windows\" é a letra do seu disco rígido sob Windows\n" "(o primeiro disco ou partição é chamado \"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" "\"%s\": verifique o país seleccionado. Se não está neste país, clique no\n" "botão \"%s\" e escolha outro. Se o seu país não estiver na lista dada,\n" "clique no botão \"%s\" para obter a lista completa dos países." #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current " "partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" "Este passo só fica disponível se uma partição GNU/Linux existente for\n" "encontrada na sua máquina.\n" "\n" "O DrakX agora precisa saber se deseja fazer uma nova instalação ou uma\n" "actualização num sistema Mandriva Linux existente:\n" "\n" " * \"%s\": Para a maior parte, isto apaga completamente o sistema antigo.\n" "No entanto, dependendo no seu esquema de particionamento, pode prevenir\n" "que parte dos seus dados existentes (principalmente os directórios \"home" "\")\n" "sejam substituídos. Se desejar alterar como o particionamento dos seus\n" "discos rígidos é feito, ou mudar o seu sistema de ficheiros, deve usar esta " "opção.\n" "\n" " * \"%s\": Este tipo de instalação permite actualizar os pacotes " "actualmente\n" "instalados no seu sistema Mandriva Linux. O seu actual esquema de\n" "particionamento, assim como os dados dos utilizadores não serão alterados.\n" "A maior parte dos outros passos da configuração permanece disponível e " "similar a uma instalação standard.\n" "\n" "A opção ``Actualizar'' deverá funcionar correctamente nos sistemas\n" "Mandriva Linux versão \"8.1\" ou superior. É desaconselhável actualizar\n" "versões anteriores à versão \"8.1\" do Mandriva Linux." #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Dependendo da linguagem que escolhe (), o DrakX irá automáticamente\n" "escolher um determinado tipo de configuração do teclado. Seleccione a opção\n" "que melhor lhe sirva ou escolha outra disposição de teclado.\n" "\n" "Também, pode não ter um teclado que corresponde exactamente à sua\n" "linguagem: por exemplo, se é Francês mas fala Português, pode desejar,\n" "mesmo assim um teclado Francês. Ou se fala Português mas vive em\n" "Inglaterra, irá encontrar-se na mesma situação. Nos dois casos, pode\n" "escolher o teclado apropriado da lista.\n" "\n" "Clique no botão \"%s\" para obter a lista de todos os teclados suportados.\n" "\n" "Se escolheu a disposição de um teclado baseado num alfabeto diferente de\n" "latim, o próximo diálogo irá-lhe permitir escolher a mapeação de teclas que\n" "lhe permita mudar o teclado entre uma disposição Latim uma não Latim." #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 " "will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "O primeiro passo, é escolher a sua linguagem preferida.\n" "\n" "A sua escolha da linguagem preferida irá afectar o instalador, a\n" "documentação, e o sistema em geral. Primeiro seleccione a região\n" "onde está localizado, depois a linguagem que fala.\n" "\n" "Ao clicar no botão \"%s\" irá permitir-lhe escolher outras linguagens\n" "para instalar na sua área de trabalho, consequentemente instalará os\n" "ficheiros para a documentação do sistema e aplicações referentes à\n" "linguagem especificada . Porexemplo, se utilizadores espanhóis estão\n" "para usar a sua máquina, escolha Inglês como linguagem predefinida\n" "na vista em árvore e \"%s\" na secção Avançada.\n" "\n" "Sobre o suporte UTF-8 (unicode): Unicode é uma codificação de caracter\n" "feito para cobrir todas as linguagens existentes. No entanto o seu suporte\n" "completo em GNU/Linux ainda está a ser desenvolvido. Por essa razão,\n" "o uso de UTF-8 em Mandriva Linux depende das escolhas do utilizador:\n" "\n" " * Se escolher uma linguagem com um forte legado de codificação\n" "(linguagens latin1, Russo, Japonês, ChinêsCoreano, Tailandês, grego, turco,\n" "maior parte de linguagens iso-8859-2), o legado da codificação será usado\n" "por omissão\n" "\n" " * Outras linguagens irão usar unicode por omissão;\n" "\n" " * Finalmente, o unicode pode também ser forçado para uso através do\n" "por um pedido do utilizador ao selecionar a opção \"%s\",\n" "independentemente como as linguagens tenham sido escolhidas.\n" "\n" "Notar que não está limitado a escolher uma única linguagem adicional.\n" "Pode escolher várias, ou até instala-las ao seleccionar a caixa\"%s\".\n" "Seleccionar suporte para uma linguagem, quer dizer traduções, fontes,\n" "verificadores de ortografia, etc., que será também instalados para essa\n" "linguagem.\n" "\n" "Para trocar entre as várias linguagens instaladas no seu sistema, pode\n" "correr o comando \"/usr/sbin/localedrake\" como \"root\" para mudar a\n" "linguagem usada por todo o sistema. Correndo o comando como utilizador\n" "normal , irá apenas mudar as configurações da linguagem para esse\n" "utilizador em particular." #: help.pm:647 #, c-format msgid "Espanol" msgstr "Espanhol" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "Usualmente, o DrakX não tem problemas em detectar o numero de botões\n" "no seu rato. Se tiver, assume que tem um rato de dois botões e irá\n" "configurá-lo para a emulação do terceiro botão. O terceiro botão de um rato\n" "de dois botões, pode ser obtido por simultâneamente clicar nos botões\n" "esquerdo e direito. O DrakX irá automáticamente saber se o seu rato usa\n" "um interface PS/2 ou USB.\n" "\n" "Se tem um rato de 3 botões sem roda, pode escolher um rato \"%s\".\n" "O DrakX irá então configurar o seu rato para que possa simular a roda: para\n" "o fazer, prima o botão do meio e mova o apontador do seu rato para cima\n" "e para baixo.\n" "\n" "Se por alguma razão deseja especificar um tipo diferente de rato, " "seleccione\n" "o tipo desejado a partir da lista fornecida.\n" "\n" "Pode escolher a entrada \"%s\" para escolher um rato ``generico'' que\n" "trabalhe práticamente com todos os ratos.\n" "\n" "Se escolher outro rato diferente do predefinido, um teste no ecrã será\n" "mostrado. Use os botões e a roda para verificar se as configurações estão\n" "correctas e o rato está a trabalhar correctamente. Se o rato não estiver\n" "a funcionar bem, prima a tecla espaço ou [Return] para cancelar o teste\n" "e retornar à lista de ratos.\n" "\n" "Ocasionalmente a roda do rato não é detectada automáticamente, então é\n" "necessário seleccionar o rato da lista. Certifique-se que selecciona o\n" "correspondente à porta a que o seu rato está ligado. Depois de seleccionar\n" "o rato e premir o botão \"%s\", uma imagem será mostrada no ecrã a mover\n" "a roda. Teste os botões e verifique se o apontador do rato se move no ecrã \n" "assim como move o rato." #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "com emulação de Roda" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "Universal | Qualquer rato PS/2 & USB" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Por favor escolha a porta correcta. Por exemplo, em Windows é \"COM1\",\n" "em GNU/Linux já é \"ttyS0\"." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Este é o ponto mais crucial de decisão para a segurança do seu sistema\n" "GNU/Linux: deve escolher a senha do \"root\". O \"root\" é o administrador\n" "do sistema e é o único utilizador autorizado para fazer actualizações,\n" "adicionar utilizadores, mudar a configuração global do sistema, e por aí a\n" " fora. Em poucas palavras, o \"root\" pode fazer tudo! É por isso que deve\n" "escolher uma senha que seja difícil de adivinhar: o DrakX irá-lhe dizer se\n" "a senha que escolheu é muito simples. Como pode ver, não é obrigado a\n" "digitar uma senha, mas aconselhamos vivamente a não o fazer.O GNU/Linux\n" "é tão propenso ao erro do operador como qualquer outro sistema operativo.\n" "Já que o \"root\" pode ultrapassar todas as limitações e involuntáriamente\n" "apagar todos os dados nas partições ao aceder descuidadamente a estas,\n" "é muito importante que haja dificuldades em aceder/tornar-se \"root\".\n" "\n" "A senha deve ser uma mistura de caracteres alfa numéricos e com pelos\n" "menos 8 caracteres de comprimento.Nunca aponte a senha do \"root\" --\n" "torna demasiado fácil comprometer o seu sistema.\n" "\n" "Uma advertência: não faça a senha demasiado longa ou muito complicada\n" "para que seja capaz de se lembrar dela.\n" "\n" "A senha não vai ser mostrada no ecrã à medida que a escreve. Para reduzir\n" "a hipótese de ser mal digitado, é necessário que a senha seja digitada duas\n" "vezes. Se lhe acontecer o mesmo erro duas vezes, aí terá que usar essa\n" "senha ``incorrecta'' na primeira vez que tentar ligar-se como \"root\".\n" "\n" "Se deseja um servidor de autenticação para controlar o acesso ao seu\n" "computador, clique em \"%s\".\n" "\n" "Se a sua rede usa seja LDAP, NIS ou a autenticação de serviços para um\n" "domínio PDC Windows, seleccione o apropriado para \"%s\".\n" "Se não sabe qual usar, deve perguntar ao administrador da sua rede.\n" "\n" "Se lhe acontecer ter problemas em relembrar senhas, ou se o seu\n" "computador nunca for conectado à internet, se confia em toda a gente que\n" "usa o seu computador, aí pode escolher em ter \"%s\"." #: help.pm:722 #, c-format msgid "authentication" msgstr "Autenticação" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" "O carregador de arranque é um pequeno programa que é iniciado pelo\n" "computador no seu arranque. É responsável pela inicialização de todo o\n" "sistema. Normalmente, a fase de instalação do gestor de arranque é\n" "completamente automática. O DrakX irá analisar o sector de arranque do\n" "disco e agir de acordo com o que lá encontrar:\n" "\n" " * se encontrar um sector de arranque Windows, irá trocá-lo por um sector\n" "de arranque GRUB/LILO. Desta maneira será capaz de escolher entre carregar\n" "o GNU/Linux ou qualquer outro Sistema Operativo instalado na sua máquina.\n" "\n" " * se encontrar um sector de arranque GRUB ou LILO, irá trocá-lo por um " "novo.\n" "\n" "Se o DrakX não conseuir determinar onde deve colocar o sector de arranque,\n" "irá-lhe perguntar onde o quer colocar. Geralmente, o \"%s\" é o local mais\n" "seguro. Ao escolher \"%s\" nenhum gestor de arranque será instalado. Use\n" "esta opção apenas se souber o que está a fazer." #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "Agora, é tempo de escolher o sistema de impressão para o seu computador.\n" "Outros sistemas operativos podem oferecer um, mas o Mandriva Linux\n" "oferece dois. Cada um dos sistemas de impressão é bem servido para tipos\n" "particulares de configuração.\n" "\n" ".*.\"%s\" -- que é um anacronismo para ``imprimir, não meter em fila'',\n" "é a escolha se tem uma ligação directa à sua impressora e deseja poder\n" "parar tudo nos erros de impressão, e não tem impressoras em rede.\n" "(\"%s\" só irá gerir os casos mais simples de rede e é algo lento quando\n" "usado em redes). É recomendado que use \"lpd\" se é a sua primeira\n" "experiência com GNU/Linux.\n" "\n" ".*.\"%s\" -- O `` Sistema de Impressão Comum Unix'', é excelente para\n" "imprimir para a sua impressora local e também para o outro lado do\n" "mundo. É simples e pode agir como servidor ou cliente para o antigo\n" "sistema de impressão \"lpd\". Portanto, é compatível com os sistemas\n" "anteriores. Pode fazer muitas coisas, mas a configuração de base é\n" "quase tão simples como \"lpd\". Se precisa dele para emular um\n" "servidor \"lpd\", tem que activar o servidor \"cups-lpd\". \"%s\" tem\n" "interfaces gráficos para imprimir ou escolher as opções de impressão.\n" "\n" "Poderá mudar a sua escolha de sistema após a instalação correndo o\n" "PrinterDrake a partir do Centro de Controlo Mandriva Linux e clicando\n" "no botão \"%s\"." #: help.pm:765 #, c-format msgid "pdq" msgstr "pdq" #: help.pm:765 printer/cups.pm:117 printer/data.pm:129 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Perito" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "O DrakX irá primeiro detectar os dispositivos IDE presentes no seu\n" "computador. Irá também procurar por um ou mais adaptadores PCI SCSI\n" "no seu sistema. Se um adaptador SCSI for encontrado, o DrakX irá\n" "automáticamente instalar o controlador apropriado.\n" "\n" "Porque a detecção de hardware não é a toda a prova, o DrakX pode falhar\n" "a detectar os discos rígidos. Se isso acontecer, terá de específicar o seu\n" "hardware á mão..\n" "\n" "Se tiver que o especificar manualmente o seu adaptador PCI SCSI, o DrakX\n" "irá-lhe perguntar se quer configurar as opções deste. Deve permitir que o\n" "DrakX verifique o hardware para as opçºoes específicas das placas que são\n" "necessárias para inicializar o adaptador. Na maior parte do tempo, o DrakX\n" "irá executar este passo sem qualquer problema.\n" "\n" "Se o DrakX não conseguir verificar quais são as opções que automáticamente\n" "determinem que parâmetros são necessários para o hardware em questão, irá\n" "precisar de configurar o controlador manualmente." #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": se foi detectada uma placa de som no seu sistema, será\n" "listada aqui. Se verificar que a placa de som listada não é a placa que " "está\n" "presente no seu sistema, pode clicar no botão e escolher outro controaldor." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1016 #: install_steps_interactive.pm:1033 #, c-format msgid "Sound card" msgstr "Placa de Som" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to " "benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "Em revisão, o DrakX irá apresentar um sumário que junta a informação\n" "recolhida sobre o seu sistema. Dependendo do hardware instalado na sua\n" " máquina, poderá ter uma ou todas das seguintes entradas.\n" "Cada entrada é feita sobre o item de hardware para ser configurado,\n" "seguido de um rápido sumário da corrente configuração.\n" "Clica no botão correspondente \"%s\" para fazer as alterações.\n" "\n" " * \"%s\": verifique a configuração actual do mapa do teclado corrente\n" "e mude-a se necessário.\n" "\n" " * \"%s\": verifique a selecção de país actual. Se não estiver neste país,\n" "clique no botão \"%s\" e escolha outro. Se o seu país não aparecer na lista\n" "mostrada, clica no botão \"%s\" para obter a lista completa de países.\n" "\n" " * \"%s\": por omissão, o DrakX escolhe o fuso horario do país\n" "escolhido. Pode clicar no botão \"%s\" se esta não é a opção correcta.\n" "\n" " * \"%s\": verifique a actual configuração do rato e clique no botão para\n" "mudar se necessário.\n" "\n" " * \"%s\": clique no botão \"%s\" para abrir o assistente de configuração\n" "de impressoras. Consulte o capítulo correspondente do ``Guia do " "Utilizador'',\n" "para mais informação sobre como configurar uma nova impressora.\n" "O interface apresentado no nosso manual, é similar ao usado na instalação.\n" "\n" " * \"%s\": se uma placa de som for detectada no seu sistema,será mostrada\n" "aqui. SE notar que a placa de som não é actualmente presente no seu\n" "sistema, pode clicar no botão para escolher um controlador diferente.\n" "\n" " * \"%s\": se tem uma placa de TV, é aqui que a informação acerca da\n" "configuração é mostrada, Se tem uma placa de TV e não é detectada,\n" "clique em \"%s\" para a tentar configurar manualmente.\n" "\n" " * \"%s\": pode clicar em \"%s\" para mudar os parâmetros associados\n" "com a placa se acha que a configuração está errada.\n" "\n" " * \"%s\": por omissão, o DrakX configura o seu interface gráfico nas\n" "resoluções \"800x600\" ou \"1024x768\". Se isso não lhe serve, pode\n" "clicar em \"%s\" para configurar o seu interface gráfico.\n" "\n" " * \"%s\": se deseja configurar a sua internet ou acesso de rede local\n" "pode fazê-lo. Refira-se a documentação impressa ou use o Centro de\n" "Controlo do Mandriva Linux a seguir a instalação ter terminado de\n" "beneficiar da ajuda incluída.\n" "\n" " * \"%s\": permite-lhe configurar endereços HTTP e FTP proxy se a máquina\n" "onde está a instalar é para ser localizada atrás de um servidor proxy.\n" "\n" " * \"%s\": esta entrada permite-lhe redefinir o nível de segurança como\n" "configurado num passo anterior.\n" "\n" " * \"%s\": se planeia ligar a sua máquina à internet, é uma boa ideia\n" "proteger-se de intrusões ao configurar uma firewall. Consultar secção\n" "correspondente do ``Guia de Utilizador'' para detalhes acerca de como\n" "configurar uma firewall.\n" "\n" " * \"%s\": se deseja mudar a configuração do carregador de arranque,\n" "clique nesse botão. Isto deveria ser reservado aos utilizadores\n" "avançados.Referira-se à documentação impressa, ou à linha de ajuda\n" "sobre a configuração de carregador de arranque (bootloader) no\n" "Centro de Controlo Mandriva Linux.\n" "\n" " * \"%s\": através desta entrada pode ajustar quais os serviços que serão\n" "executados na sua máquina. Se planeia configurar esta máquina como\n" "um servidor, é uma boa ideia rever a configuração." #: help.pm:855 install_steps_interactive.pm:880 #: install_steps_interactive.pm:975 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Fuso horário" #: help.pm:855 install_steps_interactive.pm:1049 #, c-format msgid "TV card" msgstr "Placa TV" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "Placa ISDN" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Interface gráfico" #: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1067 #: standalone/drakbackup:2040 #, c-format msgid "Network" msgstr "Rede" #: help.pm:855 install_steps_interactive.pm:1079 #, c-format msgid "Proxies" msgstr "Proxies" #: help.pm:855 install_steps_interactive.pm:1090 #, c-format msgid "Security Level" msgstr "Nível de Segurança" #: help.pm:855 install_steps_interactive.pm:1104 network/drakfirewall.pm:189 #, c-format msgid "Firewall" msgstr "Firewall" #: help.pm:855 install_steps_interactive.pm:1120 #, c-format msgid "Bootloader" msgstr "Carregador de arranque" #: help.pm:855 install_steps_interactive.pm:1133 services.pm:114 #: services.pm:157 services.pm:193 #, c-format msgid "Services" msgstr "Serviços" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Escolha o disco que deseja apagar para instalar a sua nova partição\n" "Mandriva Linux. Tenha cuidado, todos os ficheiros no disco serão\n" "perdidos de forma irrecuperável!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Clique em \"%s\" se deseja apagar todos os dados e partições\n" "presentes neste disco rígido.Tenha cuidado, depois de clicar em \"%s\",\n" "não será capaz de recuperar qualquer dado e partição presente neste\n" "disco rígido, incluindo qualquer dado do Windows.\n" "\n" "Clique em \"%s\" para anular esta operação sem perder dados\n" "e partições presentes neste disco." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Próximo ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Anterior" #: install2.pm:115 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Não foi possível aceder aos módulos que correspondem ao seu kernel (falta o " "ficheiro %s), isto geralmente significa que a sua disquete de arranque não " "está em sintonia com a média de instalação (por favor crie uma nova disquete " "de arranque)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "Também deve formatar %s" #: install_any.pm:406 #, c-format msgid "Do you have further supplementary media?" msgstr "Tem mais medias suplementares?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:409 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "A seguinte media foi encontrada e será usada durante a instalação: %s.\n" "\n" "\n" "Tem alguma media de instalação suplementar para configurar?" #: install_any.pm:422 printer/printerdrake.pm:3188 #: printer/printerdrake.pm:3195 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:422 #, c-format msgid "Network (HTTP)" msgstr "Rede (HTTP)" #: install_any.pm:422 #, c-format msgid "Network (FTP)" msgstr "Rede (FTP)" #: install_any.pm:422 #, c-format msgid "Network (NFS)" msgstr "Rede (NFS)" #: install_any.pm:452 #, c-format msgid "Insert the CD 1 again" msgstr "Insira o CD 1 novamente" #: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114 #, c-format msgid "No device found" msgstr "Nenhum dispositivo encontrado" #: install_any.pm:483 #, c-format msgid "Insert the CD" msgstr "Insira o CD" #: install_any.pm:488 #, c-format msgid "Unable to mount CD-ROM" msgstr "Não é possível montar o CD-ROM" #: install_any.pm:521 install_any.pm:542 #, c-format msgid "URL of the mirror?" msgstr "URL do mirror?" #: install_any.pm:526 #, c-format msgid "NFS setup" msgstr "Configuração NFS" #: install_any.pm:526 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "Por favor indique o endereço e o directório da sua média NFS" #: install_any.pm:527 #, c-format msgid "Hostname of the NFS mount ?" msgstr "Endereço da montagem NFS?" #: install_any.pm:527 standalone/draknfs:288 #, c-format msgid "Directory" msgstr "Directório" #: install_any.pm:580 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "" "Não é possível encontrar o ficheiro hdlist neste mirror. Certifique-se que a " "localização está correcta." #: install_any.pm:657 #, c-format msgid "Removing packages prior to upgrade..." msgstr "A remover pacotes antes de actualizar..." #: install_any.pm:699 #, c-format msgid "Looking at packages already installed..." msgstr "A ver os pacotes já instalados..." #: install_any.pm:703 #, c-format msgid "Finding packages to upgrade..." msgstr "A procurar pacotes para actualizar..." #: install_any.pm:781 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Mude o seu Cd-Rom!\n" "Por favor insira o Cd-Rom chamado \"%s\" no seu dispositivo e prima Ok " "quando pronto." #: install_any.pm:793 #, c-format msgid "Copying in progress" msgstr "Cópia em progresso" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:935 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Seleccionou o(s) seguinte(s) servidor(es): %s\n" "\n" "\n" "Estes servidores são activados por omissão. Não possuem nenhum problema\n" "de segurança conhecido, mas algum novo pode ser encontrado. Neste caso,\n" "certifique-se da sua actualização logo que possível.\n" "\n" "\n" "Deseja mesmo instalar estes servidores?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:958 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Os seguintes pacotes serão removidos para poder actualizar o seu sistema: %" "s\n" "\n" "\n" "Deseja realmente remover estes pacotes ?\n" #: install_any.pm:1394 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "Erro ao ler o ficheiro %s" #: install_any.pm:1628 #, c-format msgid "The following disk(s) were renamed:" msgstr "Os seguintes discos foram renomeados:" #: install_any.pm:1630 #, c-format msgid "%s (previously named as %s)" msgstr "%s (anteriormente conhecido por %s)" #: install_any.pm:1670 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos " "sistemas de ficheiros. Por favor verifique no hardware a causa deste problema" #: install_any.pm:1714 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1714 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1714 #, c-format msgid "NFS" msgstr "NFS" #: install_any.pm:1737 #, c-format msgid "Please choose a media" msgstr "Por favor escolha uma média" #: install_any.pm:1753 #, c-format msgid "File already exists. Overwrite it?" msgstr "O ficheiro já existe. Deseja sobrepôr o ficheiro?" #: install_any.pm:1757 #, c-format msgid "Permission denied" msgstr "Permissão negada" #: install_any.pm:1806 #, c-format msgid "Bad NFS name" msgstr "Nome NFS inválido" #: install_any.pm:1827 #, c-format msgid "Bad media %s" msgstr "Média danificada %s" #: install_any.pm:1877 #, c-format msgid "Can not make screenshots before partitioning" msgstr "Não se podem cópias do ecrã antes de particionar" #: install_any.pm:1884 #, c-format msgid "Screenshots will be available after install in %s" msgstr "As cópias de ecrã estarão disponíveis após a instalação em %s" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Instalação do sistema" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Configuração do sistema" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Algum hardware no seu computador precisa de controladores ``proprietários''\n" "para funcionar. Pode encontrar mais informações em: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Tem que ter uma partição root.\n" "Para isso, crie uma partição (ou clique numa existente).\n" "Então escolha a acção ``Ponto de montagem'' e defina-a como `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Não tem uma partição swap.\n" "\n" "Continuar mesmo assim?" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Tem que ter uma partição FAT montada em /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Sem espaço livre suficiente para alocar as novas partições" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Usar as partições existentes" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Não existe nenhuma partição para usar" #: install_interactive.pm:114 #, c-format msgid "Use the Microsoft Windows® partition for loopback" msgstr "Usar a partição Microsoft Windows® para loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Que partição deseja usar para o Linux4Win?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Escolha os tamanhos" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Tamanho da partição root em MB: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Tamanho da partição swap em MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Não há partições FAT para usar como loopback (ou não têm espaço suficiente)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Qual partição quer redimensionar?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "O redimensionador FAT é incapaz de mexer na sua partição, \n" "ocorreu o seguinte erro: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Microsoft Windows® partition" msgstr "A calcular o tamanho da partição Microsoft Windows®" #: install_interactive.pm:163 #, c-format msgid "" "Your Microsoft Windows® partition is too fragmented. Please reboot your " "computer under Microsoft Windows®, run the ``defrag'' utility, then restart " "the Mandriva Linux installation." msgstr "" "A sua partição Microsoft Windows® está demasiado fragmentada. Por favor " "reinicie o seu computador em Microsoft Windows®, execute a utilidade " "``defrag'', depois recomece a instalação Mandriva Linux." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "\n" "Your Microsoft Windows® partition will be now resized.\n" "\n" "\n" "Be careful: this operation is dangerous. If you have not already done so, " "you first need to exit the installation, run \"chkdsk c:\" from a Command " "Prompt under Microsoft Windows® (beware, running graphical program \"scandisk" "\" is not enough, be sure to use \"chkdsk\" in a Command Prompt!), " "optionally run defrag, then restart the installation. You should also backup " "your data.\n" "\n" "\n" "When sure, press %s." msgstr "" "AVISO!\n" "\n" "\n" "O DrakX irá agora redimensionar a sua partição Windows.\n" "\n" "\n" "Tenha cuidado: esta operação é perigosa. Se ainda não o tiver feito, deve " "primeiro sair da instalação, correr \"chkdsk c:\" a partir de uma Linha de " "Comandos sob Windows (cuidado, correr o programa gráfico \"scandisk\"não " "chega, assegure-se em usar \"chkdsk\" numa Linha de Comandos!), e " "opcionalmente correr o defrag) nesta partição, e então reiniciar a " "instalação. Também deve fazer um backup dos seus dados.\n" "\n" "\n" "Quando tiver certeza, pressione %s." #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Microsoft Windows® on" msgstr "Que tamanho quer deixar para o Microsoft Windows® em" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "partição %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Microsoft Windows® partition" msgstr "Redimensionar partição Microsoft Windows®" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Falha no redimensionamento FAT: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "Não há partições FAT para redimensionar (ou espaço livre insuficiente)" #: install_interactive.pm:213 #, c-format msgid "Remove Microsoft Windows®" msgstr "Remover Microsoft Windows®" #: install_interactive.pm:213 #, c-format msgid "Erase and use entire disk" msgstr "Apagar e usar todo o disco" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Tem mais que um disco rígido, em qual deles quer instalar o linux?" #: install_interactive.pm:221 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "TODAS as partições existentes e os seus dados serão perdidos no dispositivo %" "s" #: install_interactive.pm:236 #, c-format msgid "Use fdisk" msgstr "Usar fdisk" #: install_interactive.pm:239 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Pode agora particionar %s.\n" "Quando terminar, não se esqueça de gravar usando `w'" #: install_interactive.pm:275 #, c-format msgid "I can not find any room for installing" msgstr "Não consigo encontrar espaço para instalar" #: install_interactive.pm:279 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "O assistente de particionamento DrakX encontrou as seguintes soluções:" #: install_interactive.pm:287 #, c-format msgid "Partitioning failed: %s" msgstr "Particionamento falhado: %s" #: install_interactive.pm:294 #, c-format msgid "Bringing up the network" msgstr "A ligar a rede" #: install_interactive.pm:299 #, c-format msgid "Bringing down the network" msgstr "A desligar a rede" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" "Introdução\n" "\n" "O sistema operativo e os diferentes elementos disponíveis na distribuição " "Mandriva Linux \n" "irão ser chamados de \"Produtos de Software\" a partir daqui. Os Produtos de " "Software \n" "incluidos, mas não restringidos a, o grupo de programas, metodos, regras e " "documentação \n" "relativa ao sistema operativo e as diferentes componentes da distribuição " "Mandriva Linux.\n" "\n" "\n" "1. Acordo de licença\n" "\n" "Por favor leia com atenção este documento. Este documento é o termo de " "licença entre você e \n" "a Mandriva S.A. que se aplica aos Produtos de Software.\n" "Ao instalar, duplicar ou usar os Produtos de Software de qualquer maneira, " "aceita explicitamente \n" "e completamente os termos e condições desta Licença. \n" "Se não aceita qualquer parte da Licença, não lhe é permitido de instalar, " "duplicar ou \n" "usar os Produtos de Software. \n" "Qualquer tentativa de instalar, duplicar ou usar os Produtos de Software " "duma maneira que não \n" "corresponde com os termos e condições desta Licença é proibido e vai tirar-" "lhe os seus direitos \n" "sob esta Licença. Sem direitos sob esta Licença, deve imediatamente destruir " "todas as copias dos \n" "Produtos de Software.\n" "\n" "\n" "2. Garantia Limitada\n" "\n" "Os Produtos de Software e a documentação são fornecidos \"como estão\", sem " "nenhuma garantia, \n" "quanto permitido pela lei.\n" "Mandriva S.A. não vai ser, em nenhuma circunstância e quanto permitido pela " "lei, responsável de qualquer\n" "acidente particular, dos danos directos ou indirectos (inclusive os " "resultantes de perda de lucros, interrupção\n" "de negócios, perda de informações e dividas legais resultando dum julgamento," "ou qualquer ou perca consequente) \n" "decorrentes do uso ou da impossibilidade de usar os Produtos de Software, " "mesmo se a Mandriva S.A. foi \n" "avisada da possibilidade de ocorrer tais danos.\n" "\n" "LIMITAÇÃO DE RESPONSABILIDADE LIGADA À POSSESSÃO OU USO DE PROGRAMAS " "PROIBIDOS EM CERTOS PAÍSES\n" "\n" "É permitido por lei, que a Mandriva S.A. ou os seus distribuidores em " "circunstância alguma\n" "sejam responsável por quaisquer danos directos ou indirectos (inclusive os " "resultantes\n" "de perda de lucros, interrupção de negócios, perda de informações e dívidas " "legais, resultado de\n" "um julgamento, ou qualquer perca consequente) decorrentes da possessão, do " "uso ou transferência\n" "de Produtos de Software a partir de um dos servidores Mandriva Linux que " "sejam proibidos\n" "ou limitados em certos países pelas leis locais.\n" "Este limite de responsabilidade aplica-se, mas não se limita aos elementos " "de codificação contidos\n" "nos Produtos de Software.\n" "\n" "\n" "3. A licença GPL e as Licenças Relacionadas\n" "\n" "Os Produtos de Software consistem em elementos criados por pessoas ou " "identidades. A \n" "maior parte destes componentes são publicados sob os termos e condições da " "licença GNU\n" "General Public License, também denominada \"GPL\", ou de licenças similares. " "A maioria destas\n" "licenças permite usar, duplicar, adaptar ou redistribuir os elementos que " "elas cobrem. Por favor\n" "leia com atenção os termos e condições de licença de cada elemento antes de " "usar qualquer\n" "componente. Qualquer pergunta sobre uma da licença deve ser endereçada ao " "autor do componente\n" "e não à Mandriva. O programas desenvolvidos pela Mandriva S.A. são " "publicados sob os\n" "termos da licença GPL. A documentação escrita por Mandriva S.A. é publicada " "sob uma licença\n" "especifica. Por favor veja a documentação para mais detalhes.\n" "\n" "\n" "4. Direitos de Propriedade Intelectual\n" "\n" "Todos os direitos dos elementos dos Produtos de Software pertencem aos seus " "autores respectivos \n" "e são protegidos pela propriedade intelectual e pelas leis de Copyright " "aplicáveis a produtos de software.\n" "Mandriva S.A. reserva os seus direitos de modificar ou adaptar os Produtos " "de Software, como um \n" "todo ou parcialmente, em qualquer sentido e para todos os fins.\n" "\"Mandriva\", \"Mandriva Linux\" e os logotipos associados são marcas " "registradas da Mandriva S.A. \n" "\n" "\n" "5. Legislação em Vigor \n" "\n" "Se alguma parte deste contrato é considerada nula, ilegal ou não aplicável " "por um tribunal,\n" "a parte é excluída deste contrato. Permanece ligado às outras secções " "aplicáveis do \n" "contrato.\n" "Os termos e condições desta Licença são governados pelas Leis de França.\n" "Todos os desacordos sobre os termos desta licença serão de preferência " "resolvidos sem tribunal. \n" "Como ultima solução, o desacordo será referido ao Tribunal de Paris - " "França.\n" "Para qualquer pergunta sobre este documento, contacte por favor Mandriva S." "A. \n" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Aviso: O Software livre pode não ser necessáriamente livre de patentes,\n" "e algum Software incuido pode ser coberto por patentes no seu país. Por\n" "exemplo os\n" "MP3 decoders incluidos podem requerer uma licença para uso futuro (ver\n" "http://www.mp3licensing.com para mais detalhes). Se não tem a certeza\n" "que uma patente possa ser aplicada a si, veja as suas leis locais." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Aviso\n" "\n" "Por favor leia atentamente os termos em baixoSe não concorda com,\n" "alguma porção, não lhe é premitido instalar a próxima media CD.\n" "Clique em 'Recusar' para continuara instalação sem usar esta media.\n" "\n" "\n" "Algumas componentes da próxima media CD não são governados por\n" "licença GPL ou acordos similares. Cada componente é então governado\n" "pelos termos e condições da sua própria licensa.\n" "Por favor leia atentamente e cumpra com estas licenças especificas\n" "antes que use ou redistribua os ditos componentes.\n" "Tais licenças irão no geral prevenir transferência, duplicação\n" "(excepto para porpósitos de bachup), redistribuição, engenharia reversa,\n" "de-assemblar, de-compilar ou modificação do componente.\n" "Qualquer brecha no acordo irá imediatamente terminar os seus direitos\n" "sob a licensa especifica. A não ser que os termos da especifica licensa\n" "lhe garantam tais direitos, normalmente não pode instalar os programas\n" "ou mais que um sistema, ou adapte-a para ser usada numa rede. Em\n" "dúvida, por favor contacte directamente o distribuidor ou o editor do\n" "componente. A transferência para terceiros ou a cópia de tais componentes " "incluindo\n" "a documentação, é usualmente proibido.\n" "\n" "\n" "Todos os direitos para os componentes da próxima media CD pertencem\n" "aos seus respectivos autores e são protegidos pela propriedade intelectual\n" "e leis de copyright aplicavel aos programas software.\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press Enter to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "Parabéns, a instalação está completa.\n" "Retire a media de arranque e clique em Enter para reiniciar.\n" "\n" "\n" "Para informação das correcções disponíveis para esta versão do Mandriva " "Linux,\n" "consulte a Errata disponível em: \n" "\n" "\n" "%s\n" "\n" "\n" "Informação em configurar o seu sistema está disponível no\n" "capítulo pós-instalação do Guia Oficial do Utilizador do Mandriva Linux." #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "Duplicar ponto de montagem %s" #: install_steps.pm:481 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Alguns pacotes importantes não foram devidamente instalados.\n" "O seu controlador de cdrom ou o seu cdrom está defeituoso.\n" "Verifique o cdrom num computador instalado usando \"rpm -qpl media/main/*.rpm" "\"\n" #: install_steps_auto_install.pm:68 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "A entrar no passo `%s'\n" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "O seu sistema é baixo em recursos. Pode ter algum problema ao instalar\n" "o Mandriva Linux. Se isso ocorrer, pode tentar uma instalação em modo " "texto.\n" "Para isso, prima `F1' quando arrancar do CDROM, e depois digite `text'." #: install_steps_gtk.pm:211 install_steps_interactive.pm:630 #, c-format msgid "Package Group Selection" msgstr "Selecção do Grupo de Pacotes" #: install_steps_gtk.pm:254 install_steps_interactive.pm:573 #, c-format msgid "Total size: %d / %d MB" msgstr "Tamanho total: %d / %d MB" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "Pacote defeituoso" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "Versão: " #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "Tamanho: " #: install_steps_gtk.pm:302 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "Importância: " #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "Não pode seleccionar/de-seleccionar esse pacote" #: install_steps_gtk.pm:340 network/thirdparty.pm:331 #, c-format msgid "due to missing %s" msgstr "devido a faltar %s" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "devido a %s insatisfeitas" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "a tentar promover %s" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "para manter %s" #: install_steps_gtk.pm:348 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Não pode seleccionar esse pacote pois não existe espaço livre para o instalar" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "Os seguintes pacotes serão instalados" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "Os seguintes pacotes serão removidos" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Este é um pacote obrigatório, tem que ser seleccionado" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Não pode deixar de seleccionar este pacote. Ele já está instalado" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Este pacote tem que ser actualizado\n" "Tem certeza que não o quer seleccionar?" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Não pode deixar de seleccionar este pacote. Tem que ser actualizado" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "Mostrar pacotes seleccionados automaticamente" #: install_steps_gtk.pm:394 #, c-format msgid "Load/Save selection" msgstr "Carregar/Gravar a selecção" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "A actualizar a selecção de pacotes" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "Instalação mínima" #: install_steps_gtk.pm:414 install_steps_interactive.pm:492 #, c-format msgid "Choose the packages you want to install" msgstr "Escolha os pacotes que deseja instalar" #: install_steps_gtk.pm:431 install_steps_interactive.pm:716 #, c-format msgid "Installing" msgstr "A instalar" #: install_steps_gtk.pm:457 #, c-format msgid "No details" msgstr "Sem detalhes" #: install_steps_gtk.pm:472 #, c-format msgid "Time remaining " msgstr "Tempo restante " #: install_steps_gtk.pm:473 #, c-format msgid "Estimating" msgstr "A estimar" #: install_steps_gtk.pm:500 #, c-format msgid "%d packages" msgstr "%d pacotes" #: install_steps_gtk.pm:539 install_steps_interactive.pm:92 #: install_steps_interactive.pm:740 #, c-format msgid "Refuse" msgstr "Recusar" #: install_steps_gtk.pm:543 install_steps_interactive.pm:744 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Mude o seu Cd-Rom!\n" "Por favor insira o Cd-Rom chamado \"%s\" no seu dispositivo e prima Ok " "quando pronto.\n" "Se não o tiver, prima Cancelar para evitar a instalação deste Cd-Rom." #: install_steps_gtk.pm:556 install_steps_interactive.pm:755 #, c-format msgid "There was an error ordering packages:" msgstr "Houve um erro ao ordenar os pacotes:" #: install_steps_gtk.pm:558 install_steps_interactive.pm:759 #, c-format msgid "There was an error installing packages:" msgstr "Houve um erro a instalar os pacotes:" #: install_steps_gtk.pm:560 install_steps_interactive.pm:755 #: install_steps_interactive.pm:759 #, c-format msgid "Go on anyway?" msgstr "Continuar mesmo assim?" #: install_steps_gtk.pm:582 install_steps_interactive.pm:935 steps.pm:30 #, c-format msgid "Summary" msgstr "Sumário" #: install_steps_gtk.pm:605 install_steps_interactive.pm:931 #: install_steps_interactive.pm:1080 #, c-format msgid "not configured" msgstr "não configurado" #: install_steps_gtk.pm:668 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "A segiuinte media de instalação foi encontrada.\n" "Se quer evitar alguns deles, pode desmarcá-los agora." #: install_steps_gtk.pm:677 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "Tem a opção de copiar o conteúdo dos CDs para o disco rígido antes da " "instalação.\n" "Irá continuar a partir do disco rígido e os pacotes irão permanecer " "disponíveis assim que o sistema estiver instalado." #: install_steps_gtk.pm:679 #, c-format msgid "Copy whole CDs" msgstr "Copiar todos os CDs" #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "Acordo de licença" #: install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "Notas de Lançamento" #: install_steps_interactive.pm:120 #, c-format msgid "Please choose your keyboard layout." msgstr "Por favor escolha o tipo de teclado." #: install_steps_interactive.pm:122 #, c-format msgid "Here is the full list of available keyboards" msgstr "Aqui está a lista completa dos teclados disponíveis" #: install_steps_interactive.pm:152 #, c-format msgid "Install/Upgrade" msgstr "Instalar/Actualizar" #: install_steps_interactive.pm:153 #, c-format msgid "Is this an install or an upgrade?" msgstr "Isto é uma instalação ou uma actualização?" #: install_steps_interactive.pm:159 #, c-format msgid "Upgrade %s" msgstr "Actualizar %s" #: install_steps_interactive.pm:172 #, c-format msgid "Encryption key for %s" msgstr "Senha de encriptação para %s" #: install_steps_interactive.pm:195 #, c-format msgid "Please choose your type of mouse." msgstr "Por favor escolha o tipo de rato." #: install_steps_interactive.pm:196 #, c-format msgid "Mouse choice" msgstr "Escolha do rato" #: install_steps_interactive.pm:205 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Porta do Rato" #: install_steps_interactive.pm:206 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Por favor escolha a que porta série o rato está ligado." #: install_steps_interactive.pm:216 #, c-format msgid "Buttons emulation" msgstr "Emulação de botões" #: install_steps_interactive.pm:218 #, c-format msgid "Button 2 Emulation" msgstr "Emulação Botão 2" #: install_steps_interactive.pm:219 #, c-format msgid "Button 3 Emulation" msgstr "Emulação Botão 3" #: install_steps_interactive.pm:240 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:240 #, c-format msgid "Configuring PCMCIA cards..." msgstr "A configurar cartões PCMCIA..." #: install_steps_interactive.pm:247 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:247 #, c-format msgid "Configuring IDE" msgstr "A configurar IDE" #: install_steps_interactive.pm:267 #, c-format msgid "No partition available" msgstr "Sem partições disponíveis" #: install_steps_interactive.pm:270 #, c-format msgid "Scanning partitions to find mount points" msgstr "Examinar partições para procurar pontos de montagem" #: install_steps_interactive.pm:277 #, c-format msgid "Choose the mount points" msgstr "Escolha os pontos de montagem" #: install_steps_interactive.pm:325 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Sem espaço livre 1MB de arranque (bootstrap)! A instalação irá continuar, " "mas para arrancar o seu sistema, irá precisar de criar a partição de " "arranque (bootstrap) no DiskDrake" #: install_steps_interactive.pm:330 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "Irá precisar de criar uma partição de arranque (bootstrap) PPC PReP! A " "instalação irá continuar, mas para arrancar o seu sistema, irá precisar de " "criar a partição de arranque (bootstrap) no DiskDrake" #: install_steps_interactive.pm:366 #, c-format msgid "Choose the partitions you want to format" msgstr "Escolha as partições que quer formatar" #: install_steps_interactive.pm:368 #, c-format msgid "Check bad blocks?" msgstr "Verificar blocos defeituosos?" #: install_steps_interactive.pm:396 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Falha na verificação do sistema de ficheiros %s. Deseja corrigir os erros? " "(cuidado, pode perder dados)" #: install_steps_interactive.pm:399 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Sem espaço swap para concluir a instalação, por favor adicione mais" #: install_steps_interactive.pm:408 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "A procurar pacotes disponíveis e a recompilar base de dados rpm..." #: install_steps_interactive.pm:409 install_steps_interactive.pm:461 #, c-format msgid "Looking for available packages..." msgstr "A procurar pacotes disponíveis..." #: install_steps_interactive.pm:430 install_steps_interactive.pm:835 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Escolha um mirror para transferir os pacotes" #: install_steps_interactive.pm:470 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "O seu sistema não tem espaço suficiente para instalação ou actualização (%d " "> %d)" #: install_steps_interactive.pm:504 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "Por favor escolha carregar ou gravar uma selecção de pacotes.\n" "O formato é o mesmo como o dos ficheiros gerados por auto_install." #: install_steps_interactive.pm:506 #, c-format msgid "Load" msgstr "Ler" #: install_steps_interactive.pm:506 standalone/drakbackup:4055 #: standalone/drakbackup:4125 standalone/logdrake:175 #, c-format msgid "Save" msgstr "Gravar" #: install_steps_interactive.pm:514 #, c-format msgid "Bad file" msgstr "Ficheiro danificado" #: install_steps_interactive.pm:587 #, c-format msgid "Selected size is larger than available space" msgstr "O tamanho seleccionado é maior que o espaço disponível" #: install_steps_interactive.pm:602 #, c-format msgid "Type of install" msgstr "Tipo de instalação" #: install_steps_interactive.pm:603 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Não escolheu qualquer grupo de pacotes.\n" "Por favor escolha o tipo de instalação mínima que deseja:" #: install_steps_interactive.pm:607 #, c-format msgid "With basic documentation (recommended!)" msgstr "Com documentação dbásica (recomendado!)" #: install_steps_interactive.pm:608 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Verdadeira instalação mínima (especialmente sem urpmi)" #: install_steps_interactive.pm:647 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Tudo" #: install_steps_interactive.pm:686 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Se tem todos os CDs da lista abaixo, clique Ok.\n" "Se não tem nenhum desses CDs, clique Cancelar.\n" "Se apenas faltarem alguns CDs, desmarque-os e então clique Ok." #: install_steps_interactive.pm:691 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom chamado \"%s\"" #: install_steps_interactive.pm:716 #, c-format msgid "Preparing installation" msgstr "A preparar instalação" #: install_steps_interactive.pm:724 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "A instalar o pacote %s\n" "%d%%" #: install_steps_interactive.pm:773 #, c-format msgid "Post-install configuration" msgstr "Configuração pós-instalação" #: install_steps_interactive.pm:780 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" "Por favor certifique-se que a média Módulos de Actualização está no " "dispositivo %s" #: install_steps_interactive.pm:808 #, c-format msgid "Updates" msgstr "Actualizações" #: install_steps_interactive.pm:809 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "Tem agora a possibilidade de transferir os pacotes de actualização.\n" "Estes pacotes foram actualizados depois da distribuição ter saído.\n" "Podem ter correcções de segurança ou de erros.\n" "\n" "Para transferir estes pacotes, irá precisar de uma ligação Internet activa.\n" "\n" "Deseja instalar as actualizações ?" #: install_steps_interactive.pm:830 #, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "" "A contactar o sítio web Mandriva Linux para obter a lista de mirrors " "disponíveis..." #: install_steps_interactive.pm:849 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "A contactar o mirror para transferir a lista de pacotes disponíveis..." #: install_steps_interactive.pm:853 #, c-format msgid "Unable to contact mirror %s" msgstr "Não é possível contactar o mirror %s" #: install_steps_interactive.pm:853 #, c-format msgid "Would you like to try again?" msgstr "Deseja tentar novamente?" #: install_steps_interactive.pm:880 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Qual é o seu fuso horário?" #: install_steps_interactive.pm:885 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Sincronização automática da hora (com NTP)" #: install_steps_interactive.pm:893 #, c-format msgid "NTP Server" msgstr "Servidor NTP" #: install_steps_interactive.pm:948 install_steps_interactive.pm:956 #: install_steps_interactive.pm:974 install_steps_interactive.pm:981 #: install_steps_interactive.pm:1132 services.pm:133 #: standalone/drakbackup:1585 #, c-format msgid "System" msgstr "Sistema" #: install_steps_interactive.pm:988 install_steps_interactive.pm:1015 #: install_steps_interactive.pm:1032 install_steps_interactive.pm:1048 #: install_steps_interactive.pm:1059 #, c-format msgid "Hardware" msgstr "Hardware" #: install_steps_interactive.pm:994 install_steps_interactive.pm:1003 #, c-format msgid "Remote CUPS server" msgstr "Servidor CUPS remoto" #: install_steps_interactive.pm:994 #, c-format msgid "No printer" msgstr "Nenhuma impressora" #: install_steps_interactive.pm:1036 #, c-format msgid "Do you have an ISA sound card?" msgstr "Tem alguma placa de som ISA?" #: install_steps_interactive.pm:1038 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "Execute \"alsaconf\" ou \"sndconfig\" depois da instalação para configurar a " "sua placa de som" #: install_steps_interactive.pm:1040 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Nenhuma placa de som detectada. Tente \"harddrake\" depois da instalação" #: install_steps_interactive.pm:1060 #, c-format msgid "Graphical interface" msgstr "Interface gráfico" #: install_steps_interactive.pm:1066 install_steps_interactive.pm:1078 #, c-format msgid "Network & Internet" msgstr "Rede & Internet" #: install_steps_interactive.pm:1080 #, c-format msgid "configured" msgstr "configurado" #: install_steps_interactive.pm:1089 install_steps_interactive.pm:1103 #: security/level.pm:55 steps.pm:20 #, c-format msgid "Security" msgstr "Segurança" #: install_steps_interactive.pm:1108 #, c-format msgid "activated" msgstr "activado" #: install_steps_interactive.pm:1108 #, c-format msgid "disabled" msgstr "desactivado" #: install_steps_interactive.pm:1119 #, c-format msgid "Boot" msgstr "Arranque" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1123 printer/printerdrake.pm:961 #, c-format msgid "%s on %s" msgstr "%s em %s" #: install_steps_interactive.pm:1137 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Serviços: %d activados para %d registados" #: install_steps_interactive.pm:1149 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Não configurou o X. Tem a certeza que realmente quer isto?" #: install_steps_interactive.pm:1230 #, c-format msgid "Preparing bootloader..." msgstr "A preparar o carregador de arranque..." #: install_steps_interactive.pm:1240 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" "Parece ter uma máquina do Século Passado ou Desconhecida, o carregador de " "arranque yaboot não irá funcionar para si. A instalação irá continuar, mas " "irá precisar de usar o BootX ou algum outro meio para arrancar a sua " "máquina. O argumento do kernel para root fs é: root=%s" #: install_steps_interactive.pm:1246 #, c-format msgid "Do you want to use aboot?" msgstr "Quer usar o aboot?" #: install_steps_interactive.pm:1249 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Erro ao instalar o aboot, \n" "tentar forçar a instalação mesmo que isso destrua a primeira partição?" #: install_steps_interactive.pm:1266 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "Neste nível de segurança, o acesso aos ficheiros na partição do Windows é " "limitado ao administrador." #: install_steps_interactive.pm:1295 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Insira uma disquete vazia no dispositivo %s" #: install_steps_interactive.pm:1300 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Por favor Insira outra disquete para o disco de controladores" #: install_steps_interactive.pm:1302 #, c-format msgid "Creating auto install floppy..." msgstr "A criar disquete de auto-instalação..." #: install_steps_interactive.pm:1314 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Alguns passos não estão completos.\n" "\n" "Quer realmente sair agora?" #: install_steps_interactive.pm:1324 standalone/draksambashare:422 #: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159 #: standalone/logdrake:452 standalone/logdrake:458 #, c-format msgid "Congratulations" msgstr "Parabéns" #: install_steps_interactive.pm:1332 install_steps_interactive.pm:1333 #, c-format msgid "Generate auto install floppy" msgstr "Gerar disquete de auto instalação" #: install_steps_interactive.pm:1334 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "A auto instalação pode ser totalmente automatizada se\n" "quiser, nesse caso ela tomará conta do disco rígido!!\n" "(isto é feito para instalar outra máquina).\n" "\n" "Pode preferir repetir a instalação.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "Instalação Mandriva Linux %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / entre opções | seleccione | próximo ecrâ" #: interactive.pm:196 #, c-format msgid "Choose a file" msgstr "Escolha um ficheiro" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526 #: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605 #: standalone/draksambashare:1129 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319 #: standalone/drakvpn:680 #, c-format msgid "Add" msgstr "Adicionar" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249 #: standalone/draknfs:612 standalone/draksambashare:1086 #: standalone/draksambashare:1139 standalone/draksambashare:1178 #, c-format msgid "Modify" msgstr "Modificar" #: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256 #: standalone/draknfs:619 standalone/draksambashare:1087 #: standalone/draksambashare:1147 standalone/draksambashare:1186 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "Remover" #: interactive.pm:398 #, c-format msgid "Basic" msgstr "Básico" #: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490 #, c-format msgid "Finish" msgstr "Terminar" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "Fazer" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Má escolha, tente novamente\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "A sua escolha? (predefinido %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Entradas que irá ter que preencher:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "A sua escolha? (0/1, predefinido '%s') " #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Botão '%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Quer clicar neste botão?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "A sua escolha? (predefinido '%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " digite `void' para uma entrada vazia" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Há muitas coisas a escolher de (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Por favor escolha o primeiro numero dos 10 que deseja editar,\n" "ou apenas clique em Enter para proceder.\n" "A sua escolha ? " #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Note, uma etiqueta mudou :\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Re-submeter" #: keyboard.pm:171 keyboard.pm:203 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Checo (QWERTZ)" #: keyboard.pm:172 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Alemão" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:174 keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Espanhol" #: keyboard.pm:175 keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Finlandês" #: keyboard.pm:176 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Francês" #: keyboard.pm:177 keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Norueguês" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Polaco" #: keyboard.pm:179 keyboard.pm:281 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Russo" #: keyboard.pm:181 keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Sueco" #: keyboard.pm:182 keyboard.pm:317 #, c-format msgid "UK keyboard" msgstr "Teclado Inglês" #: keyboard.pm:183 keyboard.pm:320 #, c-format msgid "US keyboard" msgstr "Teclado Americano" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Albanêz" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Arménio (antigo)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Arménio (máquina de escrever)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Arménio (Fonético)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Árabe" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Azerbaijão (latino)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Belga" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Bengali (disposição-Inscript)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Bengali (Probhat)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Búlgaro (fonético)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Búlgaro (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Brasileiro (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Bósnio" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Bielorrusso" #: keyboard.pm:199 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Suíço (mapa Alemão)" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Suíço (mapa Francês)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Cherokee silábico" #: keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Checo (QWERTY)" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Alemão (sem teclas mortas)" #: keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Devanagari" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Dinamarquês" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (US)" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (Esperanto)" #: keyboard.pm:213 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (Francês)" #: keyboard.pm:215 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (UK)" #: keyboard.pm:216 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (Norueguês)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (Polaco)" #: keyboard.pm:219 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (Sueco)" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Dzongkha/Tibetano" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Estoniano" #: keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Faroese" #: keyboard.pm:226 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Georgiano (mapa \"Russo\")" #: keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Georgiano (mapa \"Latim\")" #: keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Grego" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "Grego (politónico)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "Gujarati" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "Gurmukhi" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Croata" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Húngaro" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "Irlandês" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Israelita" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Israelita (Fonético)" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Iraniano" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Islandês" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Italiano" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "Inuktitut" #: keyboard.pm:244 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Japonês 106 teclas" #: keyboard.pm:245 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Canada" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "Teclado coreano" #: keyboard.pm:250 #, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Kurdo (script árabe)" #: keyboard.pm:251 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "Teclado Kyrgyz" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Latino Americano" #: keyboard.pm:254 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Laociano" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "Lituano AZERTY (velho)" #: keyboard.pm:257 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Lituano AZERTY (novo)" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Lituano \"número de colunas\" QWERTY" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "Lituano \"fonético\" QWERTY" #: keyboard.pm:260 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Latuniano" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Malayalam" #: keyboard.pm:263 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Macedónio" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "Myanmar (Burmese)" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "Mongoliano (cirílico)" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "Maltês (UK)" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "Maltês (US)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Holandês" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Oriya" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Polaco (mapa QWERTY)" #: keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Polaco (mapa QWERTZ)" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Pashto" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Português" #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Canadiano (Quebeco)" #: keyboard.pm:279 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Romeno (QWERTZ)" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Romeno (QWERTY)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Russo (Fonético)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Saami (Norueguês)" #: keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "Saami (sueco/finlandês)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Sindhi" #: keyboard.pm:288 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Eslovaco" #: keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "Sinhala" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Eslovaco (QWERTZ)" #: keyboard.pm:292 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Eslovaco (QWERTY)" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "Serbo (cirílico)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Syriac" #: keyboard.pm:296 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Syriac (Fonético)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Telugu" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "Tamil (ISCII)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Tamil (máquina de escrever)" #: keyboard.pm:301 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Tailandês (Kedmanee)" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Tailandês (TIS-820)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Tailandês (Pattachote)" #: keyboard.pm:307 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "Tifinagh (disposição moroccan) (+latin/arábico)" #: keyboard.pm:308 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "Tifinagh (fonética) (+latin/arábico)" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Teclado Tajik" #: keyboard.pm:312 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Turkmen" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Turco (modelo \"F\" tradicional)" #: keyboard.pm:314 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Turco (modelo moderno \"Q\")" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Ucraniano" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Teclado Urdu" #: keyboard.pm:321 #, c-format msgid "US keyboard (international)" msgstr "Teclado Americano (Internacional)" #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "Uzbeco (cirílico)" #: keyboard.pm:324 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamita \"número de colunas\" QWERTY" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Jugoslavo (latim)" #: keyboard.pm:332 #, c-format msgid "Right Alt key" msgstr "A tecla Alt Direita" #: keyboard.pm:333 #, c-format msgid "Both Shift keys simultaneously" msgstr "As duas teclas Shift simultaneamente" #: keyboard.pm:334 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Control e teclas Shift simultaneamente" #: keyboard.pm:335 #, c-format msgid "CapsLock key" msgstr "Tecla CapsLock" #: keyboard.pm:336 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Premir as teclas Shift e CapsLock simultâneamente" #: keyboard.pm:337 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl e teclas Alt simultâneamente" #: keyboard.pm:338 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt e teclas Shift simultâneamente" #: keyboard.pm:339 #, c-format msgid "\"Menu\" key" msgstr "Tecla \"Menu\"" #: keyboard.pm:340 #, c-format msgid "Left \"Windows\" key" msgstr "Tecla esquerda \"Windows\"" #: keyboard.pm:341 #, c-format msgid "Right \"Windows\" key" msgstr "Tecla direita \"Windows\"" #: keyboard.pm:342 #, c-format msgid "Both Control keys simultaneously" msgstr "As duas teclas Control simultâneamente" #: keyboard.pm:343 #, c-format msgid "Both Alt keys simultaneously" msgstr "As duas teclas Alt simultâneamente" #: keyboard.pm:344 #, c-format msgid "Left Shift key" msgstr "Tecla Shift esquerda" #: keyboard.pm:345 #, c-format msgid "Right Shift key" msgstr "Tecla Shift Direita" #: keyboard.pm:346 #, c-format msgid "Left Alt key" msgstr "Tecla Alt Esquerda" #: keyboard.pm:347 #, c-format msgid "Left Control key" msgstr "Tecla Control Esquerda" #: keyboard.pm:348 #, c-format msgid "Right Control key" msgstr "Tecla Control Direita" #: keyboard.pm:384 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Aqui pode escolher a tecla ou a combinação de teclas que\n" "irão permitir mudar entre as diferentes disposições de teclado\n" "(ex: latim e não latim)" #: keyboard.pm:389 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Esta opção irá ser activada depois da instalação.\n" "Durante a instalação, irá ter de usar a tecla Control Direita\n" "para mudar a disposição de teclado." #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "Emiratos Árabes Unidos" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "Afeganistão" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua e Barbuda" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "Anguilla" #: lang.pm:200 #, c-format msgid "Albania" msgstr "Albânia" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "Arménia" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "Antilhas Holandesas" #: lang.pm:203 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "Antárctica" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Argentina" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "Samoa Americana" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "Azerbeijão" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bósnia e Herzegovina" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "Bulgária" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "Bahrain" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:219 #, c-format msgid "Benin" msgstr "Benin" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "Bermuda" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "Bolívia" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "Bahamas" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "Butão" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "Ilha Bouvet" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "Botswana" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "Bielorrússia" #: lang.pm:229 #, c-format msgid "Belize" msgstr "Belize" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Ilhas Cocos (Keeling)" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "Congo (Kinshasa)" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "República Centro-Africana" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "Congo (Brazzaville)" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "Costa do Marfim" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "Ilhas Cook" #: lang.pm:238 #, c-format msgid "Chile" msgstr "Chile" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "Camarões" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "China" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "Colômbia" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "Servia & Montenegro" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "Cuba" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "Cabo Verde" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "Ilhas Natal" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "Chipre" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "Djibouti" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "Dominica" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "República Dominicana" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "Algéria" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "Equador" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "Egipto" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "Sahara Ocidental" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "Eritreia" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "Etiópia" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "Fiji" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Ilhas Falkland (Malvinas)" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "Micronésia" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "Ilhas Faroé" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "Gabão" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 #: network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "Reino Unido" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "Granada" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "Geórgia" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "Guiana Francesa" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "Gana" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "Gronelândia" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "Gâmbia" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "Guiné" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "Guadalupe" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "Guiné Equatorial" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Sul da Geórgia e a Ilha Sandwich Sul" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "Guatemala" #: lang.pm:283 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "Guiné-Bissau" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "Guiana" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "Hong Kong SAR (China)" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "Ilha Heard e Ilhas McDonald" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "Honduras" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "Croácia" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "Haiti" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "Indonésia" #: lang.pm:295 #, c-format msgid "India" msgstr "Índia" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "Territorio Inglês no Oceano Índio" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "Iraque" #: lang.pm:298 #, c-format msgid "Iran" msgstr "Irão" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "Islândia" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "Jamaica" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "Jordão" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "Quénia" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "Kyrgyzstan" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "Cambodja" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "Comoros" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "Santo Kitts e Nevis" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "Coreia do Norte" #: lang.pm:311 #, c-format msgid "Korea" msgstr "Coreia" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "Koweit" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "Ilhas Caimão" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "Kazaquistão" #: lang.pm:315 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "Líbano" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "Santa Lúcia" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "Libéria" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "Lesoto" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "Lituânia" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "Luxemburgo" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "Latvia" #: lang.pm:325 #, c-format msgid "Libya" msgstr "Líbia" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "Marrocos" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "Mónaco" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "Moldovia" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "Madagáscar" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "Ilhas Marshall" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "Macedónia" #: lang.pm:332 #, c-format msgid "Mali" msgstr "Mali" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "Mongólia" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "Ilhas Mariana do Norte" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "Martinica" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "Mauritania" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:339 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "Maurícias" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "Maldivas" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "Malawi" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "México" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "Malásia" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "Moçambique" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "Namíbia" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "Nova Caledónia" #: lang.pm:348 #, c-format msgid "Niger" msgstr "Níger" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "Ilha Norfolk" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "Nigéria" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "Nicarágua" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:356 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:358 #, c-format msgid "Oman" msgstr "Oman" #: lang.pm:359 #, c-format msgid "Panama" msgstr "Panamá" #: lang.pm:360 #, c-format msgid "Peru" msgstr "Peru" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "Polinésia Francesa" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "Papua Nova Guiné" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "Filipinas" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "Pakistão" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "São Pedro e Miquelon" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "Porto Rico" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "Palestina" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "Paraguai" #: lang.pm:372 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "Quatar" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "Reunião" #: lang.pm:375 #, c-format msgid "Romania" msgstr "Roménia" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "Ruanda" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "Arábia Saudita" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "Ilhas Salomão" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "Seichelas" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "Sudão" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "Singapura" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "Santa Helena" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "Eslovénia" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Ilhas Svalbard e Jan Mayen" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "Serra Leoa" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "São Marino" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "Somália" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "Suriname" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "São Tomé e Príncipe" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "El Salvador" #: lang.pm:395 #, c-format msgid "Syria" msgstr "Síria" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "Suazilandia" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "Ilhas Turks e Caicos" #: lang.pm:398 #, c-format msgid "Chad" msgstr "Chade" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "Territorios Franceses do Sul" #: lang.pm:400 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "Tajikistão" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "Timor Leste" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "Turkmenistão" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "Tunísia" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "Tanga" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "Turquia" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad e Tobago" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "Tanzânia" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "Ucrânia" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "Uganda" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "Estados Unidos - Ilhas Costeiras Menores" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "Uruguai" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "Uzbekistão" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "Vaticano" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "São Vicente e as Grenadinas" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "Venezuela" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "Ilhas Virgens (Inglesas)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Ilhas Virgens (U.S.)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "Vietname" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "Wallis e Futuna" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "Yemen" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "Mayotte" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "Zâmbia" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: lang.pm:1141 #, c-format msgid "Welcome to %s" msgstr "Bem-vindo ao %s" #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" "Falha ao mover as extensões físicas usadas para outros volumes físicos." #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "O volume físico %s ainda está em uso" #: lvm.pm:145 #, c-format msgid "Remove the logical volumes first\n" msgstr "Remove os volumes lógicos primeiro\n" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physical volumes" msgstr "" "O carregador de arranque não pode gerir /boot em vários volumes físicos" #: modules/interactive.pm:19 #, c-format msgid "This driver has no configuration parameter!" msgstr "Este dispositivo não tem parâmetros de configuração!" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Configuração dos módulos" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Pode configurar cada parâmetro do módulo aqui." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Encontrados %s interfaces" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Tem algum outro?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Tem algum interface %s?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Ver informação do hardware" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "A instalar o controlador para o dispositivo USB" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "A instalar o controlador para o dispositivo firewire %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "A instalar o controlador dispositivo do disco %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "A instalar o controlador para o dispositivo ethernet %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "A instalar o controlador para %s placa %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(módulo %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Pode agora providênciar as opções para o modulo %s.\n" "Note que qualquer endereço deve ser escrito com o prefixo 0x como '0x12'" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Pode agora definir as opções para o módulo %s.\n" "As opções estão no formato ``nome=valor nome2=valor2 ...''\n" "Para exemplo, ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Opções do módulo:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Que controlador %s devo tentar?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Em alguns casos, o controlador %s precisa ter informações extra para\n" "funcionar correctamente, contudo irá funcionar correctamente sem estas.\n" "Deseja\n" "especificar opções extras ou permitir que sonde a sua máquina\n" "pela informação que precisa? Ocasionalmente, a verificação pode bloquear\n" "o computador, mas não deve causar qualquer dano." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Auto-sondar" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Especificar opções" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "O carregamento do módulo %s falhou.\n" "Quer tentar novamente com outros parâmetros?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "um número" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d números separados por vírgulas" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d cadeias separadas por virgulas" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "números separados por virgulas" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "cadeias separadas por vírgulas" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Rato - Sun" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Padrão" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Rato Genérico PS2 com roda" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86 #: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602 #: network/netconnect.pm:614 network/netconnect.pm:619 #: network/netconnect.pm:635 network/netconnect.pm:637 #, c-format msgid "Automatic" msgstr "Automático" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Rato Kensington Thinking" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Rato Rede Genius" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 botão" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Rato Genérico com 2 Botões" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Rato Genérico com 3 Botões e emulação da Roda" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Roda" #: mouse.pm:55 #, c-format msgid "serial" msgstr "série" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Rato Genérico com 3 Botões" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan com emulação da Roda" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Sistemas do Rato" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Séries Logitech CC" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Séries Logitech CC com emulação da roda" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "Séries MM" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Rato Logitech (série, tipo C7 antigo)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Rato Logitech (série, tipo C7 antigo) com emulação da Roda" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Rato Kensington Thinking com emulação da roda" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "Rato Bus" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 botões" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 botões" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 botões com emulação de Roda" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Qualquer rato PS/2 & USB" #: mouse.pm:89 #, c-format msgid "Microsoft Xbox Controller S" msgstr "Controlador Microsoft Xbox S" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "nenhum" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Nenhum Rato" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "Touchpad Synaptics" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "Por favor teste o rato" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "Para activar o rato," #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "MOVA A SUA RODA!" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "Servidor Web" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Servidor de Nomes do Domínio" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "Servidor SSH" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "Servidor FTP" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Servidor de Correio Electrónico" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "Servidor POP e IMAP" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Servidor Telnet" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "Partilha de Ficheiros Windows (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "Servidor CUPS" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "Pedido de eco (ping)" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:74 #, c-format msgid "Port scan detection" msgstr "Detecção de verificação de portas" #: network/drakfirewall.pm:165 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" "configurador drakfirewall\n" "\n" "Isto configura uma firewall pessoal para esta máquina Mandriva Linux.\n" "Para uma boa e dedicada solução firewall, por favor veja a distribuição\n" "especializada Mandriva Security Firewall." #: network/drakfirewall.pm:171 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "Configurador drakfirewall\n" "\n" "Verifique se configurou o seu acesso à Rede/Internet com o\n" "drakconnect antes de avançar mais." #: network/drakfirewall.pm:188 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Que serviços deseja permitir a que a Internet se ligue?" #: network/drakfirewall.pm:191 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Pode digitar portas variadas. \n" "Exemplos validos são: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Veja em /etc/services para informações." #: network/drakfirewall.pm:197 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Porta dada inválida: %s.\n" "O formato adequado é \"porta/tcp\" ou \"porta/udp\", \n" "onde porta é entre 1 e 65535.\n" "\n" "Pode também dar um intervalo de portas (ex: 24300:24350/udp)" #: network/drakfirewall.pm:207 #, c-format msgid "Everything (no firewall)" msgstr "Tudo (sem firewall)" #: network/drakfirewall.pm:209 #, c-format msgid "Other ports" msgstr "Outras portas" #: network/drakfirewall.pm:251 network/drakfirewall.pm:254 #: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145 #: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189 #: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202 #: standalone/net_applet:385 standalone/net_applet:422 #, c-format msgid "Interactive Firewall" msgstr "Firewall Interactiva" #: network/drakfirewall.pm:252 #, c-format msgid "" "You can be warned when someone accesses to a service or tries to intrude " "into your computer.\n" "Please select which network activity should be watched." msgstr "" "Pode ser avisado quando alguém acede este serviço ou tenta entrar no seu " "computador.\n" "Por favor escolha que actividade de rede deve ser vigiada." #: network/drakfirewall.pm:257 #, c-format msgid "Use Interactive Firewall" msgstr "Usar Firewall Interactiva" #: network/ifw.pm:129 #, c-format msgid "Port scanning" msgstr "Exame de portas" #: network/ifw.pm:130 #, c-format msgid "Service attack" msgstr "Serviço atacado" #: network/ifw.pm:131 #, c-format msgid "Password cracking" msgstr "Ataque á senha" #: network/ifw.pm:132 #, c-format msgid "\"%s\" attack" msgstr "\"%s\" ataque" #: network/ifw.pm:134 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "Um ataque de pesquisa à porta foi tentado por %s." #: network/ifw.pm:135 #, c-format msgid "The %s service has been attacked by %s." msgstr "O serviço %s foi atacado por %s." #: network/ifw.pm:136 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "Um ataque para crackar a senha foi tentado por %s." #: network/ifw.pm:137 #, c-format msgid "A \"%s\" attack has been attempted by %s" msgstr "Um ataque \"%s\" foi tentado por %s." #: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558 #: network/netconnect.pm:561 network/netconnect.pm:709 #: network/netconnect.pm:713 #, c-format msgid "Unlisted - edit manually" msgstr "Não listado - editar manualmente" #: network/isdn.pm:160 network/netconnect.pm:396 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:160 network/netconnect.pm:396 #, c-format msgid "I do not know" msgstr "Eu não sei" #: network/isdn.pm:161 network/netconnect.pm:396 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:162 network/netconnect.pm:396 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/netconnect.pm:602 network/netconnect.pm:619 #: network/netconnect.pm:635 #, c-format msgid "Manual" msgstr "Manual" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" "Nenhum dispositivo a suportar o controlador %s, o ndiswrapper está presente!" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "Por favor seleccione o controlador Windows (ficheiro .inf)" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "Não é possível instalar o controlador %s ndiswrapper!" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "Não é possível carregar o módulo ndiswrapper" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" "O dispositivo seleccionado já foi configurado com o controlador %s.\n" "Deseja realmente usar um controlador ndiswrapper?" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "Não é possível encontrar o interface ndiswrapper!" #: network/netconnect.pm:69 network/netconnect.pm:494 #: network/netconnect.pm:506 #, c-format msgid "Manual choice" msgstr "Escolha manual" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "Placa ISDN interna" #: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Configuração manual" #: network/netconnect.pm:81 standalone/drakroam:121 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "IP Automático (BOOTP/DHCP)" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "IP Automático (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "Protocolo para o resto do mundo" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "Protocolo Europeu (EDSS1)" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protocolo para o resto do mundo\n" "Sem Canal-D (linhas alugadas)" #: network/netconnect.pm:103 standalone/harddrake2:329 #: standalone/net_monitor:102 standalone/net_monitor:103 #: standalone/net_monitor:108 #, c-format msgid "unknown" msgstr "desconhecido" #: network/netconnect.pm:120 network/thirdparty.pm:220 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Modem Alcatel speedtouch USB" #: network/netconnect.pm:121 #, c-format msgid "Sagem USB modem" msgstr "Modem USB Sagem" #: network/netconnect.pm:122 #, c-format msgid "Bewan modem" msgstr "Modem Bewan" #: network/netconnect.pm:123 #, c-format msgid "ECI Hi-Focus modem" msgstr "Modem ECI Hi-Focus" #: network/netconnect.pm:127 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Dynamic Host Configuration Protocol (DHCP)" #: network/netconnect.pm:128 #, c-format msgid "Manual TCP/IP configuration" msgstr "Configuração manual do TCP/IP" #: network/netconnect.pm:129 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "Protocolo de Tunelamento Ponto a Ponto (PPTP)" #: network/netconnect.pm:130 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "PPP através de Ethernet (PPPoE)" #: network/netconnect.pm:131 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "PPP através de ATM (PPPoA)" #: network/netconnect.pm:132 #, c-format msgid "DSL over CAPI" msgstr "DSL sobre CAPI" #: network/netconnect.pm:136 #, c-format msgid "Bridged Ethernet LLC" msgstr "Bridge em Ethernet LLC" #: network/netconnect.pm:137 #, c-format msgid "Bridged Ethernet VC" msgstr "Bridge em Ethernet VC" #: network/netconnect.pm:138 #, c-format msgid "Routed IP LLC" msgstr "IP Routeado LLC" #: network/netconnect.pm:139 #, c-format msgid "Routed IP VC" msgstr "IP Routeado VC" #: network/netconnect.pm:140 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:141 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:145 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "Baseado em Script" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "Baseado em terminal" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:251 standalone/drakconnect:56 #, c-format msgid "Network & Internet Configuration" msgstr "Configuração de Rede & Internet" #: network/netconnect.pm:257 #, c-format msgid "LAN connection" msgstr "Conexão LAN" #: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182 #: standalone/drakroam:220 standalone/drakroam:223 #, c-format msgid "Wireless connection" msgstr "Conexão Wireless" #: network/netconnect.pm:259 #, c-format msgid "ADSL connection" msgstr "Conexão ADSL" #: network/netconnect.pm:260 #, c-format msgid "Cable connection" msgstr "Conexão por Cabo" #: network/netconnect.pm:261 #, c-format msgid "ISDN connection" msgstr "Conexão ISDN" #: network/netconnect.pm:262 #, c-format msgid "Modem connection" msgstr "Conexão modem" #: network/netconnect.pm:263 #, c-format msgid "DVB connection" msgstr "Conexão DVB" #: network/netconnect.pm:273 #, c-format msgid "Choose the connection you want to configure" msgstr "Escolha a conexão que deseja configurar" #: network/netconnect.pm:288 network/netconnect.pm:787 #, c-format msgid "Connection Configuration" msgstr "Configuração da Conexão" #: network/netconnect.pm:288 network/netconnect.pm:788 #, c-format msgid "Please fill or check the field below" msgstr "Por favor preencha ou verifique os campos abaixo" #: network/netconnect.pm:291 #, c-format msgid "Your personal phone number" msgstr "O seu número de telefone pessoal" #: network/netconnect.pm:292 network/netconnect.pm:791 #, c-format msgid "Provider name (ex provider.net)" msgstr "Nome do provedor (ex: provedor.net)" #: network/netconnect.pm:293 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "Número do telefone do provedor" #: network/netconnect.pm:294 #, c-format msgid "Provider DNS 1 (optional)" msgstr "Provedor DNS 1 (opcional)" #: network/netconnect.pm:295 #, c-format msgid "Provider DNS 2 (optional)" msgstr "Provedor DNS 2 (opcional)" #: network/netconnect.pm:296 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "Modo de marcação" #: network/netconnect.pm:297 standalone/drakconnect:449 #: standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "Velocidade de conexão" #: network/netconnect.pm:298 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "Tempo de espera da conexão (em segundos)" #: network/netconnect.pm:299 network/netconnect.pm:324 #: network/netconnect.pm:794 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "Nome do utilizador da conta" #: network/netconnect.pm:300 network/netconnect.pm:325 #: network/netconnect.pm:795 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "Senha da conta" #: network/netconnect.pm:301 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "IRQ da Placa" #: network/netconnect.pm:302 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "Memória da Placa (DMA)" #: network/netconnect.pm:303 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "IO da Placa" #: network/netconnect.pm:304 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "IO_O da Placa" #: network/netconnect.pm:305 #, c-format msgid "Card IO_1" msgstr "IO_1 da Placa" #: network/netconnect.pm:320 #, c-format msgid "Cable: account options" msgstr "Cabo: opções da conta" #: network/netconnect.pm:323 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "Usar BPALogin (necessário para o Telstra)" #: network/netconnect.pm:349 network/netconnect.pm:671 #: network/netconnect.pm:827 network/netconnect.pm:1171 #, c-format msgid "Select the network interface to configure:" msgstr "Seleccione o interface de rede a configurar:" #: network/netconnect.pm:351 network/netconnect.pm:386 #: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70 #: standalone/drakconnect:713 #, c-format msgid "Net Device" msgstr "Dispositivo de Rede" #: network/netconnect.pm:352 network/netconnect.pm:357 #, c-format msgid "External ISDN modem" msgstr "Modem ISDN externo" #: network/netconnect.pm:385 standalone/harddrake2:216 #, c-format msgid "Select a device!" msgstr "Seleccione um dispositivo !" #: network/netconnect.pm:394 network/netconnect.pm:404 #: network/netconnect.pm:414 network/netconnect.pm:447 #: network/netconnect.pm:461 #, c-format msgid "ISDN Configuration" msgstr "Configuração ISDN" #: network/netconnect.pm:395 #, c-format msgid "What kind of card do you have?" msgstr "Que tipo de placa tem?" #: network/netconnect.pm:405 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Se tiver uma placa ISA, os valores do próximo quadro devem estar correctos.\n" "\n" "Se tiver uma placa PCMCIA, tem que saber o \"irq\" e \"io\" da sua placa.\n" #: network/netconnect.pm:409 #, c-format msgid "Continue" msgstr "Continuar" #: network/netconnect.pm:409 #, c-format msgid "Abort" msgstr "Abortar" #: network/netconnect.pm:415 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Qual destas é a sua placa ISDN?" #: network/netconnect.pm:433 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" "Um controlador CAPI está disponível para este modem. Este controlador CAPI " "pode propor mais funcionalidades do que o controlador livre (como o envio de " "telecopias). Que controlador deseja usar?" #: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251 #: standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "Controlador" #: network/netconnect.pm:447 #, c-format msgid "Which protocol do you want to use?" msgstr "Que protocolo quer usar?" #: network/netconnect.pm:449 standalone/drakconnect:109 #: standalone/drakconnect:300 standalone/drakconnect:562 #: standalone/drakids:207 standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "Protocolo" #: network/netconnect.pm:461 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Seleccione o seu provedor.\n" "Se não estiver listado, escolha Não Listado" #: network/netconnect.pm:463 network/netconnect.pm:557 #: network/netconnect.pm:708 #, c-format msgid "Provider:" msgstr "Provedor:" #: network/netconnect.pm:472 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "O seu modem não é suportado pelo sistema.\n" "Veja em http://www.linmodems.org" #: network/netconnect.pm:491 #, c-format msgid "Select the modem to configure:" msgstr "Seleccione o modem a configurar:" #: network/netconnect.pm:526 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Por favor escolha a que porta série o seu modem está ligado." #: network/netconnect.pm:555 #, c-format msgid "Select your provider:" msgstr "Seleccione o seu provedor:" #: network/netconnect.pm:579 #, c-format msgid "Dialup: account options" msgstr "Dialup: opções da conta" #: network/netconnect.pm:582 #, c-format msgid "Connection name" msgstr "Nome da conexão" #: network/netconnect.pm:583 #, c-format msgid "Phone number" msgstr "Número do telefone" #: network/netconnect.pm:584 #, c-format msgid "Login ID" msgstr "ID da Autenticação" #: network/netconnect.pm:599 network/netconnect.pm:632 #, c-format msgid "Dialup: IP parameters" msgstr "Dialup: parâmetros IP" #: network/netconnect.pm:602 #, c-format msgid "IP parameters" msgstr "Parâmetros IP" #: network/netconnect.pm:603 network/netconnect.pm:942 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:882 #: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286 #, c-format msgid "IP address" msgstr "Endereço IP" #: network/netconnect.pm:604 #, c-format msgid "Subnet mask" msgstr "Máscara subnet" #: network/netconnect.pm:616 #, c-format msgid "Dialup: DNS parameters" msgstr "Conexão Dialup: parâmetros DNS" #: network/netconnect.pm:619 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:620 #, c-format msgid "Domain name" msgstr "Nome do domínio" #: network/netconnect.pm:621 network/netconnect.pm:792 #: standalone/drakconnect:992 #, c-format msgid "First DNS Server (optional)" msgstr "Primeiro Servidor DNS (opcional)" #: network/netconnect.pm:622 network/netconnect.pm:793 #: standalone/drakconnect:993 #, c-format msgid "Second DNS Server (optional)" msgstr "Segundo Servidor DNS (opcional)" #: network/netconnect.pm:623 #, c-format msgid "Set hostname from IP" msgstr "Definir nome de endereço a partir do IP" #: network/netconnect.pm:635 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "Gateway" #: network/netconnect.pm:636 standalone/drakroam:124 #, c-format msgid "Gateway IP address" msgstr "Endereço IP do Gateway" #: network/netconnect.pm:671 #, c-format msgid "ADSL configuration" msgstr "Configuração ADSL" #: network/netconnect.pm:706 #, c-format msgid "Please choose your ADSL provider" msgstr "Por favor escolha o seu provedor ADSL" #: network/netconnect.pm:736 #, c-format msgid "" "Please choose your DSL connection type.\n" "If you do not know it, keep the preselected type." msgstr "" "Por favor escolha o seu tipo de ligação DSL.\n" "Se não sabe, mantenha o tipo pré-seleccionado." #: network/netconnect.pm:739 #, c-format msgid "ADSL connection type:" msgstr "Tipo de conexão ADSL:" #: network/netconnect.pm:797 #, c-format msgid "Virtual Path ID (VPI):" msgstr "ID do Caminho Virtual (VPI):" #: network/netconnect.pm:798 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "ID do Circuito Virtual (VCI):" #: network/netconnect.pm:801 #, c-format msgid "Encapsulation:" msgstr "Encapsulamento:" #: network/netconnect.pm:831 #, c-format msgid "Manually load a driver" msgstr "Carregar um controlador manualmente" #: network/netconnect.pm:832 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "Usar um controlador Windows (com o ndiswrapper)" #: network/netconnect.pm:897 #, c-format msgid "Zeroconf hostname resolution" msgstr "Resolução do nome de endereço Zeroconf" #: network/netconnect.pm:898 network/netconnect.pm:929 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "A configurar o dispositivo de rede %s (controlador %s)" #: network/netconnect.pm:899 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" "Os seguintes protocolos podem ser usados para configurar uma conexão LAN. " "Por favor escolha o que deseja usar" #: network/netconnect.pm:930 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Por favor introduza a configuração IP para esta máquina.\n" "Cada item deve ser introduzido como endereço IP em notação\n" "ponto-decimal (por exemplo, 1.2.3.4)." #: network/netconnect.pm:937 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "Atribuir nome de endereço a partir do endereço DHCP" #: network/netconnect.pm:938 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "Nome do servidor DHCP" #: network/netconnect.pm:943 standalone/drakconnect:321 #: standalone/drakconnect:883 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "Netmask" #: network/netconnect.pm:945 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Procurar o id da placa rede (útil para os portáteis)" #: network/netconnect.pm:946 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "Ligação à Rede \"Hotplugging\"" #: network/netconnect.pm:948 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "Iniciar no arranque" #: network/netconnect.pm:950 standalone/drakconnect:460 #, c-format msgid "Metric" msgstr "Metrico" #: network/netconnect.pm:951 #, c-format msgid "Enable IPv6 to IPv4 tunnel" msgstr "Activar passagem IPv6 para IPv4" #: network/netconnect.pm:953 standalone/drakconnect:369 #: standalone/drakconnect:886 #, c-format msgid "DHCP client" msgstr "Cliente DHCP" #: network/netconnect.pm:955 standalone/drakconnect:379 #, c-format msgid "DHCP timeout (in seconds)" msgstr "Tempo de espera DHCP (em segundos)" #: network/netconnect.pm:956 standalone/drakconnect:382 #, c-format msgid "Get DNS servers from DHCP" msgstr "Obter servidores DNS por DHCP" #: network/netconnect.pm:957 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "Obter servidores YP por DHCP" #: network/netconnect.pm:958 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "Obter servidores NTPD por DHCP" #: network/netconnect.pm:966 printer/printerdrake.pm:1876 #: standalone/drakconnect:676 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "O endereço IP deve estar no formato 1.2.3.4" #: network/netconnect.pm:970 standalone/drakconnect:680 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "O netmask deve estar no formato 255.255.224.0" #: network/netconnect.pm:974 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "Aviso: o endereço IP %s é normalmente reservado!" #: network/netconnect.pm:979 standalone/drakTermServ:1856 #: standalone/drakTermServ:1857 standalone/drakTermServ:1858 #, c-format msgid "%s already in use\n" msgstr "%s já está em uso\n" #: network/netconnect.pm:1019 #, c-format msgid "Choose an ndiswrapper driver" msgstr "Escolha um controlador ndiswrapper" #: network/netconnect.pm:1021 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "Use o controlador ndiswrapper %s" #: network/netconnect.pm:1021 #, c-format msgid "Install a new driver" msgstr "Instalar um novo controlador" #: network/netconnect.pm:1033 #, c-format msgid "Select a device:" msgstr "Seleccione um dispositivo:" #: network/netconnect.pm:1062 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Por favor indique os parâmetros wireless para esta placa:" #: network/netconnect.pm:1065 standalone/drakconnect:404 #: standalone/drakroam:52 #, c-format msgid "Operating Mode" msgstr "Modo de Operação" #: network/netconnect.pm:1066 #, c-format msgid "Ad-hoc" msgstr "Ad-hoc" #: network/netconnect.pm:1066 #, c-format msgid "Managed" msgstr "Controlado" #: network/netconnect.pm:1066 #, c-format msgid "Master" msgstr "Master" #: network/netconnect.pm:1066 #, c-format msgid "Repeater" msgstr "Repetidor" #: network/netconnect.pm:1066 #, c-format msgid "Secondary" msgstr "Secundário" #: network/netconnect.pm:1066 #, c-format msgid "Auto" msgstr "Auto" #: network/netconnect.pm:1069 standalone/drakconnect:405 #: standalone/drakroam:115 #, c-format msgid "Network name (ESSID)" msgstr "Nome da Rede (ESSID)" #: network/netconnect.pm:1070 standalone/drakroam:116 #, c-format msgid "Encryption mode" msgstr "Modo de encriptação" #: network/netconnect.pm:1075 #, c-format msgid "Allow access point roaming" msgstr "Permitir ponto de acesso roaming" #: network/netconnect.pm:1077 standalone/drakconnect:406 #, c-format msgid "Network ID" msgstr "ID de Rede" #: network/netconnect.pm:1078 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "Frequência de operação" #: network/netconnect.pm:1079 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "Sensibilidade do ponto inicial" #: network/netconnect.pm:1080 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "Bitrate (em b/s)" #: network/netconnect.pm:1081 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" #: network/netconnect.pm:1082 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" "O RTS/CTS adiciona um handshake antes da transmissão de cada pacote para " "certificar\n" "que o canal está livre. Isto adiciona overhead, mas aumenta a performance no " "caso de\n" "nós escondidos ou um número grande de nós activos. Este pârametro define o " "tamanho do\n" "pacote mais pequeno para o qual o nó envia RTS, um valor igual ao tamanho " "máximo\n" "do pacote desactiva o esquema. Pode também definir este pârametro para " "auto, fixo ou\n" "desligado." #: network/netconnect.pm:1089 standalone/drakconnect:421 #, c-format msgid "Fragmentation" msgstr "Fragmentação" #: network/netconnect.pm:1090 standalone/drakconnect:422 #, c-format msgid "iwconfig command extra arguments" msgstr "Argumentos extra do comando iwconfig" #: network/netconnect.pm:1091 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" "Aqui, pode configurar alguns parâmetros wireless extra tais como:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick já está definido " "como nome do endereço).\n" "\n" "Veja a página do manual iwconfig(8) para mais informações." # -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1098 standalone/drakconnect:423 #, c-format msgid "iwspy command extra arguments" msgstr "Argumentos extra do comando lwspy" #: network/netconnect.pm:1099 #, c-format msgid "" "iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" "O iwspy é usado para definir uma lista de endereços na interface\n" "de rede wireless e para monitorizar a informação da ligação para cada um\n" "\n" "Esta informação é a mesma que a disponível em /proc/net/wireless:\n" "qualidade da ligação, força do sinal e nível do ruído.\n" "\n" "Consulte a página do manual iwpspy(8) para mais informações." #: network/netconnect.pm:1108 standalone/drakconnect:424 #, c-format msgid "iwpriv command extra arguments" msgstr "Argumentos extra do comando lwpriv" #: network/netconnect.pm:1109 #, c-format msgid "" "iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" "O iwpriv permite configurar parâmetros opcionais (privados) de um\n" "interface de rede.\n" "\n" "O iwpriv lida com parâmetros e definições específicas para cada controlador\n" "(em oposição ao iwconfig que lida com os genéricos).\n" "\n" "Em teoria, a documentação de cada dispositivo deve indicar como usar\n" "esses comandos de interface específicos e os seus efeitos.\n" "\n" "Veja a página do manual iwpriv(8) para mais informações." #: network/netconnect.pm:1124 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Freq deve ter o sufixo k, M ou G (por exemplo, \"2.46G\" para uma frequência " "de 2.46 GHz), ou então insira suficientes '0' (zeros)." #: network/netconnect.pm:1128 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "A taxa de transferência deve ter o sufixo k, M ou G (por exemplo, \"11M\" " "para 11M), ou insira suficientes '0' (zeros)." #: network/netconnect.pm:1171 #, c-format msgid "DVB configuration" msgstr "Configuração DVB" #: network/netconnect.pm:1172 #, c-format msgid "DVB Adapter" msgstr "Adaptador DVB" #: network/netconnect.pm:1189 #, c-format msgid "DVB adapter settings" msgstr "Definições do adaptador DVB" #: network/netconnect.pm:1192 #, c-format msgid "Adapter card" msgstr "Placa de adaptador" #: network/netconnect.pm:1193 #, c-format msgid "Net demux" msgstr "Net demux" #: network/netconnect.pm:1194 #, c-format msgid "PID" msgstr "PID" #: network/netconnect.pm:1222 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Por favor introduza o nome da sua máquina.\n" "O nome da sua máquina deve ser um nome totalmente qualificado,\n" "tal como ``mybox.mylab.myco.com''.\n" "Pode também introduzir o endereço IP do gateway se tiver algum." #: network/netconnect.pm:1227 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "Por último pode também escrever nos seus endereços IP do servidor DNS." #: network/netconnect.pm:1229 standalone/drakconnect:991 #, c-format msgid "Host name (optional)" msgstr "Nome da máquina (opcional)" #: network/netconnect.pm:1229 standalone/drakhosts:197 #, c-format msgid "Host name" msgstr "Nome da máquina" #: network/netconnect.pm:1231 #, c-format msgid "DNS server 1" msgstr "Servidor DNS 1" #: network/netconnect.pm:1232 #, c-format msgid "DNS server 2" msgstr "Servidor DNS 2" #: network/netconnect.pm:1233 #, c-format msgid "DNS server 3" msgstr "Servidor DNS 3" #: network/netconnect.pm:1234 #, c-format msgid "Search domain" msgstr "Domínio de procura" #: network/netconnect.pm:1235 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" "Por defeito o domínio de procura será definido a partir do nome da máquina " "devidamente qualificado" #: network/netconnect.pm:1236 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (ex. %s)" #: network/netconnect.pm:1238 #, c-format msgid "Gateway device" msgstr "Dispositivo Gateway" #: network/netconnect.pm:1247 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "O endereço do servidor DNS deve ser no formato 1.2.3.4" #: network/netconnect.pm:1252 standalone/drakconnect:685 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "O endereço Gateway deve ser no formato 1.2.3.4" #: network/netconnect.pm:1265 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" "Se desejado, introduza um nome de máquina Zeroconf.\n" "Este é o nome que a sua máquina irá usar para advertir qualquer\n" "dos seus recursos partilhados que não são geridos pela rede.\n" "Não é necessário na maioria das redes." #: network/netconnect.pm:1269 #, c-format msgid "Zeroconf Host name" msgstr "Nome de Máquina Zeroconf" #: network/netconnect.pm:1272 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "O nome de máquina Zeroconf não deve conter um ." #: network/netconnect.pm:1282 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "Deseja permitir aos utilizadores iniciar a conexão?" #: network/netconnect.pm:1295 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Quer iniciar a sua conexão no arranque?" #: network/netconnect.pm:1311 #, c-format msgid "Automatically at boot" msgstr "Automáticamente no arranque" #: network/netconnect.pm:1313 #, c-format msgid "By using Net Applet in the system tray" msgstr "Ao usar a Net Applet na bandeja do painel" #: network/netconnect.pm:1315 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "Manualmente (o interface continuará a ser activado no arranque)" #: network/netconnect.pm:1324 #, c-format msgid "How do you want to dial this connection?" msgstr "Como quer ligar esta conexão ?" #: network/netconnect.pm:1337 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Quer tentar ligar-se à Internet agora?" #: network/netconnect.pm:1345 standalone/drakconnect:1023 #, c-format msgid "Testing your connection..." msgstr "A testar a sua conexão..." #: network/netconnect.pm:1370 #, c-format msgid "The system is now connected to the Internet." msgstr "O sistema está agora ligado à Internet." #: network/netconnect.pm:1371 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Por razões de segurança, será desligada agora." #: network/netconnect.pm:1372 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "O sistema não parece estar conectado à Internet.\n" "Tente reconfigurar a sua conexão." #: network/netconnect.pm:1387 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Parabéns, a configuração da rede e da Internet acabou.\n" "\n" #: network/netconnect.pm:1390 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Após estar pronto, recomendamos que reinicie o seu ambiente X para evitar " "qualquer problema relacionado com o nome da máquina." #: network/netconnect.pm:1391 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "Ocorreram problemas durante a configuração.\n" "Teste a sua conexão via net_monitor ou mcc. Se a sua conexão não funcionar, " "pode querer relançar a configuração." #: network/netconnect.pm:1402 #, c-format msgid "(detected on port %s)" msgstr "(detectado na porta %s)" # -PO: here, "(detected)" string will be appended to eg "ADSL connection" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1404 #, c-format msgid "(detected %s)" msgstr "(detectado %s)" #: network/netconnect.pm:1404 #, c-format msgid "(detected)" msgstr "(detectado)" #: network/netconnect.pm:1405 #, c-format msgid "Network Configuration" msgstr "Configuração da Rede" #: network/netconnect.pm:1406 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Por que está a fazer uma instalação de rede, a sua rede já está " "configurada.\n" "Clique em OK para manter a configuração, ou Cancelar para reconfigurar as " "suas conexões Internet & Rede.\n" #: network/netconnect.pm:1409 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "A rede precisa ser reiniciada. Deseja reiniciá-la?" #: network/netconnect.pm:1410 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Ocorreu um problema ao reiniciar a rede: \n" "\n" "%s" #: network/netconnect.pm:1411 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Vamos agora configurar a conexão %s.\n" "\n" "\n" "Clique em \"%s\" para continuar." #: network/netconnect.pm:1412 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "A configuração está completa, deseja aplicar as definições?" #: network/netconnect.pm:1413 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Deve ter configurado múltiplas maneiras de se ligar à Internet.\n" "Escolha aquela que deseja usar.\n" "\n" #: network/netconnect.pm:1414 #, c-format msgid "Internet connection" msgstr "Conexão Internet" #: network/netconnect.pm:1431 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Ocorreu um erro inesperado:\n" "%s" #: network/network.pm:411 #, c-format msgid "Proxies configuration" msgstr "Configuração de proxies" #: network/network.pm:412 #, c-format msgid "" "Here you can set up your proxies configuration (eg: http://" "my_caching_server:8080)" msgstr "" "Aqui pode definir as configurações dos seus proxies (p.ex. http://" "meu_servidor_de_cache:8080)" #: network/network.pm:413 #, c-format msgid "HTTP proxy" msgstr "Proxy HTTP" #: network/network.pm:414 #, c-format msgid "Use HTTP proxy for HTTPS connections" msgstr "" #: network/network.pm:415 #, c-format msgid "HTTPS proxy" msgstr "" #: network/network.pm:416 #, c-format msgid "FTP proxy" msgstr "Proxy FTP" #: network/network.pm:420 #, c-format msgid "Proxy should be http://..." msgstr "O Proxy deve ser http://..." #: network/network.pm:421 #, c-format msgid "Proxy should be https?://..." msgstr "" #: network/network.pm:422 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "O Url deve começar com 'ftp:' ou 'http:'" #: network/shorewall.pm:55 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Por favor escolha o nome do interface conectado à internet.\n" "\n" "Exemplos:\n" "\t\tppp+ para um modem ou uma conexão DSL, \n" "\t\teth0, ou eth1 para uma conexão por cabo, \n" "\t\tippp+ para uma conexão isdn.\n" #: network/thirdparty.pm:232 #, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "Copie o microcódigo Alcatel como mgmt.o em /usr/share/speedtouch/" #: network/thirdparty.pm:241 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" "O modem ECI Hi-Focus não pode ser suportado devido a um problema na " "distribuição dos controladores binários.\n" "\n" "Pode encontrar um controlador em http://eciadsl.flashtux.org/" #: network/thirdparty.pm:321 #, c-format msgid "Could not install the packages (%s)!" msgstr "Não foi possível instalar os pacotes (%s) !" #: network/thirdparty.pm:329 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "Alguns pacotes (%s) são pedidos mas não estão disponíveis." #: network/thirdparty.pm:330 #, c-format msgid "" "These packages can be found in Mandriva Club or in Mandriva commercial " "releases." msgstr "" "Estes pacotes podem ser encontrados no Clube Mandriva ou nas versões " "comerciais Mandriva." #: network/thirdparty.pm:332 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" "Os ficheiros pedidos podem também ser instalados a partir deste URL:\n" "%s" #: network/thirdparty.pm:372 #, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "Não é possível encontrar \"%s\" no seu sistema Windows!" #: network/thirdparty.pm:374 #, c-format msgid "No Windows system has been detected!" msgstr "Nenhum sistema Windows detectado!" #: network/thirdparty.pm:384 #, c-format msgid "Insert floppy" msgstr "Insira uma disquete" #: network/thirdparty.pm:385 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Insira uma disquete formatada FAT no leitor %s com %s no directório raíz e " "prima %s" #: network/thirdparty.pm:395 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Erro de acesso à disquete, não é possível montar o dispositivo %s" #: network/thirdparty.pm:405 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Precisa do microcode Alcatel.\n" "Pode fornecê-lo agora via disquete ou pela sua partição windows,\n" "ou saltar e fazê-lo mais tarde." #: network/thirdparty.pm:409 network/thirdparty.pm:411 #, c-format msgid "Use a floppy" msgstr "Usar uma disquete" #: network/thirdparty.pm:409 #, c-format msgid "Use my Windows partition" msgstr "Usar a minha partição Windows" #: network/thirdparty.pm:419 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Cópia do firmware falhada, o ficheiro %s não foi encontrado" #: network/thirdparty.pm:424 standalone/drakautoinst:250 #: standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Parabéns!" #: network/thirdparty.pm:424 #, c-format msgid "Firmware copy succeeded" msgstr "Cópia do firmware bem succedida" #: network/thirdparty.pm:493 #, c-format msgid "Looking for required software and drivers..." msgstr "A procurar software e controladores pedidos..." #: network/thirdparty.pm:498 #, c-format msgid "Please wait, running device configuration commands..." msgstr "" "Por favor aguarde, a executar os comandos de configuração dos dispositivos..." #: network/wireless.pm:8 #, c-format msgid "Open WEP" msgstr "Abrir WEP" #: network/wireless.pm:9 #, c-format msgid "Restricted WEP" msgstr "WEP Restricto" #: network/wireless.pm:10 #, c-format msgid "WPA Pre-Shared Key" msgstr "Chave Pré-Partilhada WPA" #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "falha ao montar: " #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "Partição extendida não é suportada nesta plataforma" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Tem um buraco na sua tabela de partições mas não a posso usar.\n" "A única solução é mover as suas partições primárias para ter o buraco " "próximo das partições extendidas" #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "A restauração pelo ficheiro %s falhou: %s" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "Ficheiro de cópia de segurança danificado" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "Erro ao escrever no ficheiro %s" #: partition_table/raw.pm:253 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Alguma coisa maá está acontecer no seu disco. \n" "O teste para verificar a integridade dos dados falhou. \n" "Significa que escrever algo no disco resultará em dados danificados " "aleatóriamente." #: pkgs.pm:21 #, c-format msgid "must have" msgstr "obrigatório" #: pkgs.pm:22 #, c-format msgid "important" msgstr "importante" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "muito bom" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "bom" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "talvez" #: pkgs.pm:474 #, c-format msgid "Downloading file %s..." msgstr "A transferir o ficheiro %s..." #: printer/cups.pm:105 #, c-format msgid "(on %s)" msgstr "(em %s)" #: printer/cups.pm:105 #, c-format msgid "(on this machine)" msgstr "(nesta máquina)" #: printer/cups.pm:117 standalone/printerdrake:200 #, c-format msgid "Configured on other machines" msgstr "Configurado noutras máquinas" #: printer/cups.pm:119 #, c-format msgid "On CUPS server \"%s\"" msgstr "No servidor CUPS \"%s\"" #: printer/cups.pm:119 printer/printerdrake.pm:4886 #: printer/printerdrake.pm:4896 printer/printerdrake.pm:5055 #: printer/printerdrake.pm:5066 printer/printerdrake.pm:5280 #, c-format msgid " (Default)" msgstr " (Predefinido)" #: printer/data.pm:67 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Imprimir, não meter em fila." #: printer/data.pm:68 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:80 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Servidor de Impressão em Linha" #: printer/data.pm:81 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:102 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR Nova Geração" #: printer/data.pm:103 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:128 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Sistema Unix Comum de Impressão" #: printer/data.pm:158 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Sistema Unix Comum de Impressão (servidor remoto)" #: printer/data.pm:159 #, c-format msgid "Remote CUPS" msgstr "CUPS remoto" #: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498 #: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692 #: printer/main.pm:1810 printer/printerdrake.pm:960 #: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447 #: printer/printerdrake.pm:3981 #, c-format msgid "Unknown model" msgstr "Modelo desconhecido" #: printer/main.pm:24 #, c-format msgid "Local printer" msgstr "Impressora local" #: printer/main.pm:25 #, c-format msgid "Remote printer" msgstr "Impressora remota" #: printer/main.pm:26 #, c-format msgid "Printer on remote CUPS server" msgstr "Impressora num Servidor CUPS remoto" #: printer/main.pm:27 printer/printerdrake.pm:1360 #: printer/printerdrake.pm:1899 #, c-format msgid "Printer on remote lpd server" msgstr "Impressora num servidor lpd remoto" #: printer/main.pm:28 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Impressora da rede (TCP/Socket)" #: printer/main.pm:29 #, c-format msgid "Printer on SMB/Windows server" msgstr "Impressora num servidor SMB/Windows" #: printer/main.pm:30 #, c-format msgid "Printer on NetWare server" msgstr "Impressora num servidor NetWare" #: printer/main.pm:31 printer/printerdrake.pm:1903 #, c-format msgid "Enter a printer device URI" msgstr "Introduza uma impressora URI" #: printer/main.pm:32 #, c-format msgid "Pipe job into a command" msgstr "Envia o trabalho para um comando" #: printer/main.pm:43 #, c-format msgid "recommended" msgstr "recomendado" #: printer/main.pm:355 standalone/printerdrake:199 #, c-format msgid "Configured on this machine" msgstr "Configurado nesta máquina" #: printer/main.pm:361 printer/printerdrake.pm:1445 #, c-format msgid " on parallel port #%s" msgstr " na porta paralela #%s" #: printer/main.pm:364 printer/printerdrake.pm:1448 #, c-format msgid ", USB printer #%s" msgstr ", impressora USB #%s" #: printer/main.pm:366 #, c-format msgid ", USB printer" msgstr ", impressora USB" #: printer/main.pm:370 #, c-format msgid ", HP printer on a parallel port" msgstr ", impressora HP numa porta paralela" #: printer/main.pm:372 #, c-format msgid ", HP printer on USB" msgstr ", impressora HP em USB" #: printer/main.pm:374 #, c-format msgid ", HP printer on HP JetDirect" msgstr ", impressora HP na HP JetDirect" #: printer/main.pm:376 #, c-format msgid ", HP printer" msgstr ", impressora HP" #: printer/main.pm:382 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", dispositivo multi-funções no porta paralela #%s" #: printer/main.pm:385 #, c-format msgid ", multi-function device on a parallel port" msgstr ", dispositivo multi-funções na porta paralela" #: printer/main.pm:387 #, c-format msgid ", multi-function device on USB" msgstr ", dispositivo multi-funções em USB" #: printer/main.pm:389 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", dispositivo multi-funções em HP JetDirect" #: printer/main.pm:391 #, c-format msgid ", multi-function device" msgstr ", dispositivo multi-funções" #: printer/main.pm:395 #, c-format msgid ", printing to %s" msgstr ", a imprimir para %s" #: printer/main.pm:398 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " no servidor LPD \"%s\", impressora \"%s\"" #: printer/main.pm:401 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", endereço TCP/IP \"%s\", porta %s" #: printer/main.pm:406 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " no servidor SMB/Windows \"%s\", partilha \"%s\"" #: printer/main.pm:411 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " no servidor Novell \"%s\", impressora \"%s\"" #: printer/main.pm:414 #, c-format msgid ", using command %s" msgstr ", a usar o comando %s" #: printer/main.pm:429 #, c-format msgid "Parallel port #%s" msgstr "Porta paralela #%s" #: printer/main.pm:432 printer/printerdrake.pm:1466 #: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508 #, c-format msgid "USB printer #%s" msgstr "Impressora USB #%s" #: printer/main.pm:434 #, c-format msgid "USB printer" msgstr "Impressora USB" #: printer/main.pm:438 #, c-format msgid "HP printer on a parallel port" msgstr "Impressora HP em porta paralela" #: printer/main.pm:440 #, c-format msgid "HP printer on USB" msgstr "Impressora HP em USB" #: printer/main.pm:442 #, c-format msgid "HP printer on HP JetDirect" msgstr "Impressora HP em HP JetDirect" #: printer/main.pm:444 #, c-format msgid "HP printer" msgstr "Impressora HP" #: printer/main.pm:450 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Dispositivo multi-funções na porta paralela #%s" #: printer/main.pm:453 #, c-format msgid "Multi-function device on a parallel port" msgstr "Dispositivo multi-funções numa porta paralela" #: printer/main.pm:455 #, c-format msgid "Multi-function device on USB" msgstr "Dispositivo multi-funções em USB" #: printer/main.pm:457 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Dispositivo multi-funções em HP JetDirect" #: printer/main.pm:459 #, c-format msgid "Multi-function device" msgstr "Dispositivo multi-funções" #: printer/main.pm:463 #, c-format msgid "Prints into %s" msgstr "A imprimir para %s" #: printer/main.pm:466 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "servidor LPD \"%s\", impressora \"%s\"" #: printer/main.pm:469 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "Endereço TCP/IP \"%s\", porta %s" #: printer/main.pm:474 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "Servidor SMB/Windows \"%s\", partilha \"%s\"" #: printer/main.pm:479 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Servidor Novell \"%s\", impressora \"%s\"" #: printer/main.pm:482 #, c-format msgid "Uses command %s" msgstr "Usa o comando %s" #: printer/main.pm:484 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:689 printer/printerdrake.pm:1047 #: printer/printerdrake.pm:3119 #, c-format msgid "Raw printer (No driver)" msgstr "Impressora directa (sem controlador)" #: printer/main.pm:1309 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "Rede(s) local(is)" #: printer/main.pm:1311 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "Interface \"%s\"" #: printer/main.pm:1313 #, c-format msgid "Network %s" msgstr "Rede %s" #: printer/main.pm:1315 #, c-format msgid "Host %s" msgstr "Endereço %s" #: printer/main.pm:1344 #, c-format msgid "%s (Port %s)" msgstr "%s (Porta %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "A HP LaserJet 1000 precisa que o seu firmware seja carregado depois de ser " "ligada. Transfira o controlador Windows a partir do sítio Web HP (o firmware " "do CD da impressora não funciona) e extraia o ficheiro do firmware " "descomprimindo o ficheiro exe com o utilitário 'unzip' e procure o ficheiro " "'sihp1000.img'. Copie o ficheiro para o directório '/etc/printer'. É depois " "encontrado pelo script de envío automático e será então carregado sempre que " "a impressora for ligada.\n" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "Configuração de impressoras CUPS" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Aqui pode escolher se as impressoras ligadas a esta máquina devem ser " "acessadas por máquinas remotas e por quais máquinas remotas." #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Pode também decidir aqui se as impressoras nas máquinas remotas devem ser " "disponibilizadas automaticamente nesta máquina." #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" "As impressoras nesta máquina estão disponíveis para outros computadores" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" "Encontrar automaticamente as impressoras disponíveis em máquinas remotas" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Partilha de impressoras nos hosts/redes: " #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "Configuração personalizada" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Sem máquinas remota" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "Servidores CUPS adicionais: " #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "Para ter acesso a impressoras em servidores remotos CUPS na sua rede local " "só precisa activar a opção \"Encontrar automaticamente as impressoras " "disponíveis em máquinas remotas\"; os servidores CUPS informam a suamáquina " "automaticamente acerca das suas impressoras. Todas as impressoras conhecidas " "pela sua máquina são listadas na secção \"Impressoras remotas\" na janela " "principal do Printerdrake. Se os seus servidores CUPS não estão na sua rede " "local, deve indicar os endereços IP e opionalmenteção os números das portas " "para obter a informação das impressoras dos servidores." #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "Modo de impressão de texto japonês" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Activar isto permite de imprimir ficheiros em texto puro escritos em " "japonês. Use apenas isto se deseja mesmo imprimir texto japonês, pois se for " "activado não vai poder mais imprimir letras acentuadas com tipos de letra " "latinos e não vai poder regular as margens, o tamanho das letras, etc. Esta " "configuração só afecta as impressoras ligadas a esta máquina. Se quer " "imprimir texto japonês numa impressora configurada numa máquina remota, " "deverá activar isto na máquina remota." #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Correcção automática da Configuração do CUPS" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Quando esta opção é activada, em cada arranque do CUPS verifica-se " "automaticamente que\n" "\n" "- se LPD/LPRng está instalado, /etc/printcap não é sobreposto pelo CUPS\n" "\n" "- se /etc/cups/cupsd.conf falta, ele irá ser criado\n" "\n" "- quando as informações das impressoras são publicadas, não contém " "\"localhost\" como nome do servidor.\n" "\n" "Se alguma destas medidas levar a problemas, desligue esta opção, mas então " "irá ter que tratar desses pontos." #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4519 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "Servidor CUPS remoto e nenhum servidor CUPS local" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "Ligado" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "Desligado" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" "Neste modo o servidor CUPS local será parado e todos os pedidos de impressão " "irão directamente para o servidor especificado em baixo. Note que não é " "possível definir filas locais de impressão e se o servidor especificado " "estiver em baixo não pode ser imprimido nada desta máquina." #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "Partilha das impressoras locais" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Estas são as máquinas e redes nos quais a impressoras locais deveriam estar " "disponíveis:" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "Adicionar um endereço/rede" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "Editar endereço/rede seleccionado" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "Remover endereço/rede seleccionado" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "Endereço IP do endereço/rede:" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" "Escolha a rede ou endereço onde a impressoras locais devem estar disponíveis:" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "IP do endereço/rede em falta." #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "O IP do endereço/rede introduzido não está correcto.\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "Exemplos para IPs correctos:\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" "Este endereço/rede já está na lista, não pode ser adicionado novamente.\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "A aceder às impressoras num servidor CUPS remoto" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Adicione aqui os servidores CUPS cujas impressoras deseja usar. Só precisa " "de fazer isto se os servidores não enviam as informações de impressão para a " "rede local." #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "Adicionar servidor" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "Editar o servidor seleccionado" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "Remover o servidor seleccionado" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Insira o endereço IP e a porta do endereço cujas impressoras deseja usar." #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" "Se nenhuma porta for indicada, a 631 irá ser escolhida como predefinida." #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "Falta o IP do servidor!" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "O IP inserido não está correcto.\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:2133 #, c-format msgid "The port number should be an integer!" msgstr "O número da porta deve ser um inteiro!" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Este servidor já existe na lista, não pode ser adicionado novamente.\n" #: printer/printerdrake.pm:462 printer/printerdrake.pm:2160 #: standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "Porta" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, c-format msgid "On, Name or IP of remote server:" msgstr "Ligado, Nome ou IP do servidor remoto:" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4528 #: printer/printerdrake.pm:4594 #, c-format msgid "CUPS server name or IP address missing." msgstr "Nome do servidor CUPS ou endereço IP em falta." #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:811 printer/printerdrake.pm:880 #: printer/printerdrake.pm:901 printer/printerdrake.pm:927 #: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065 #: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110 #: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489 #: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598 #: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677 #: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961 #: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114 #: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839 #: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955 #: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068 #: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198 #: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229 #: printer/printerdrake.pm:4319 printer/printerdrake.pm:4414 #: printer/printerdrake.pm:4420 printer/printerdrake.pm:4448 #: printer/printerdrake.pm:4555 printer/printerdrake.pm:4664 #: printer/printerdrake.pm:4684 printer/printerdrake.pm:4693 #: printer/printerdrake.pm:4708 printer/printerdrake.pm:4909 #: printer/printerdrake.pm:5384 printer/printerdrake.pm:5467 #: standalone/printerdrake:75 standalone/printerdrake:590 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4127 #: printer/printerdrake.pm:4665 #, c-format msgid "Reading printer data..." msgstr "A ler os dados da impressora..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "A relançar o CUPS..." #: printer/printerdrake.pm:614 #, c-format msgid "" "Allow pop-up windows, printer setup and package installation may be canceled" msgstr "" "Permitir aparecimento de janelas, a configuração de impressoras e instalação " "de pacotes podem ser cancelados" #: printer/printerdrake.pm:616 #, c-format msgid "" "No pop-up windows, printer setup and package installation cannot be canceled" msgstr "" "Não permitir aparecimento de janelas, a configuração de impressoras e " "instalação de pacotes não podem ser cancelados" #: printer/printerdrake.pm:622 #, c-format msgid "Printer auto administration" msgstr "Auto administração de impressoras" #: printer/printerdrake.pm:623 #, c-format msgid "" "Here you can configure printer administration tasks which should be done " "automatically." msgstr "" "Aqui pode configurar as tarefas de administração de impressoras que devem " "ser feitas automáticamente." #: printer/printerdrake.pm:626 #, c-format msgid "Do automatic configuration of new printers" msgstr "Fazer configuração automática nas novas impressoras" #: printer/printerdrake.pm:627 printer/printerdrake.pm:641 #, c-format msgid "when a USB printer is connected and turned on" msgstr "quando uma impressora USB está conectada e ligada" #: printer/printerdrake.pm:630 #, c-format msgid "when Printerdrake is started" msgstr "quando o Printerdrake é iniciado" #: printer/printerdrake.pm:634 #, c-format msgid "Mode for automatic printer setup:" msgstr "Modo para configuração automática de impressoras:" #: printer/printerdrake.pm:640 #, c-format msgid "Re-enable disabled printers" msgstr "Re-activar impressoras desactivadas" #: printer/printerdrake.pm:644 #, c-format msgid "when the printing system is started" msgstr "quando o sistema de impressão é iniciado" #: printer/printerdrake.pm:680 #, c-format msgid "Communication error handling for the printer \"%s\"" msgstr "Erro de comunicação com a impressora \"%s\"" #: printer/printerdrake.pm:682 #, c-format msgid "" "Here you can configure how errors during the communication between your " "computer and the printer \"%s\" should be handled (for example if the " "printer is not turned on)." msgstr "" "Aqui pode configurar como os erros de comunicação entre o seu computador e a " "impressora \"%s\" devem ser tratados (por exemplo se a impressora não " "estiver ligada)." #: printer/printerdrake.pm:686 #, c-format msgid "The number of retries should be an integer number of at least 1!" msgstr "O número de tentativas deve ser um número inteiro de pelo menos 1!" #: printer/printerdrake.pm:690 #, c-format msgid "The delay between retries should be a positive integer number!" msgstr "O atraso entre as tentativas deve ser um número inteiro positivo!" #: printer/printerdrake.pm:701 #, c-format msgid "Do not disable the printer" msgstr "Não desactivar a impressora" #: printer/printerdrake.pm:704 #, c-format msgid "Retry infinitely often" msgstr "Tentar infinitamente" #: printer/printerdrake.pm:707 #, c-format msgid "Number of retries" msgstr "Número de tentativas" #: printer/printerdrake.pm:712 #, c-format msgid "Delay between retries (in sec)" msgstr "Atraso entre tentativas (em segundos)" #: printer/printerdrake.pm:745 printer/printerdrake.pm:765 #, c-format msgid "Select Printer Connection" msgstr "Seleccionar Conexão da Impressora" #: printer/printerdrake.pm:746 #, c-format msgid "How is the printer connected?" msgstr "Como está a impressora ligada?" #: printer/printerdrake.pm:748 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "As impressoras nos servidores CUPS remotos não precisam de ser configuradas " "aqui; elas serão detectadas automaticamente." #: printer/printerdrake.pm:751 printer/printerdrake.pm:4911 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" "\n" "AVISO: Nenhuma conexão à rede local está activa, as impressoras remotas não " "podem ser detectadas nem testadas!" #: printer/printerdrake.pm:758 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" "Auto-detecção de impressora (Local, TCP/Socket, impressoras SMB, e " "dispositivo URI)" #: printer/printerdrake.pm:760 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" "Modificar o Intervalo de tempo para auto-detecção de impressora em rede" #: printer/printerdrake.pm:766 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" "Indique o intervalo de tempo para auto-detecção de impressora em rede (em " "mseg) aqui. " #: printer/printerdrake.pm:768 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" "Quanto maior for o intervalo de tempo, melhor serão as detecções de " "impressoras em rede, mas a pesquisa pode demorar mais, especialmente se " "houver muitas máquinas com firewalls locais na rede. " #: printer/printerdrake.pm:772 #, c-format msgid "The timeout must be a positive integer number!" msgstr "O intervalo de tempo deve ser um número inteiro positivo!" #: printer/printerdrake.pm:811 #, c-format msgid "Checking your system..." msgstr "A verificar o seu sistema..." #: printer/printerdrake.pm:829 #, c-format msgid "and one unknown printer" msgstr "e uma impressora desconhecida" #: printer/printerdrake.pm:831 #, c-format msgid "and %d unknown printers" msgstr "e %d impressoras desconhecidas" #: printer/printerdrake.pm:835 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "As seguintes impressoras\n" "\n" "%s%s\n" "estão directamente ligadas ao seu sistema" #: printer/printerdrake.pm:837 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "A seguinte impressora\n" "\n" "%s%s\n" "está directamente ligada ao seu sistema" #: printer/printerdrake.pm:838 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "A seguinte impressora\n" "\n" "%s%s\n" "está directamente ligada ao seu sistema" #: printer/printerdrake.pm:842 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Há uma impressora desconhecida ligada directamente ao seu sistema" #: printer/printerdrake.pm:843 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Há %d impressoras desconhecidas ligadas directamente ao seu sistema" #: printer/printerdrake.pm:846 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" "Não foi encontrada nenhuma impressora ligada directamente à sua máquina" #: printer/printerdrake.pm:849 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "(Por favor verifique se a sua impressora está conectada e ligada).\n" #: printer/printerdrake.pm:862 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Quer autorizar a impressão nas impressoras indicadas acima ou nas " "impressoras da rede local ?\n" #: printer/printerdrake.pm:863 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Quer autorizar a impressão nas impressoras da rede local ?\n" #: printer/printerdrake.pm:865 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Quer autorizar a impressão nas impressoras indicadas acima ?\n" #: printer/printerdrake.pm:866 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Tem a certeza que deseja configurar a impressão nesta máquina ?\n" #: printer/printerdrake.pm:867 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "NOTA: Dependendo do modelo da impressora e o sistema de impressão, vão ser " "instalados até %d MB de programas adicionais." #: printer/printerdrake.pm:884 #, c-format msgid "Do not setup printer automatically now, and never do it again" msgstr "Não configurar agora automaticamente, e não o fazer novamente" #: printer/printerdrake.pm:928 #, c-format msgid "Searching for new printers..." msgstr "A procurar novas impressoras..." #: printer/printerdrake.pm:976 #, c-format msgid "Do not setup printer automatically again" msgstr "Não configurar impressoras automaticamente novamente" #: printer/printerdrake.pm:983 #, c-format msgid "New printers found" msgstr "Novas impressoras encontradas" #: printer/printerdrake.pm:984 #, c-format msgid "New printer found" msgstr "Nova impressora encontrada" #: printer/printerdrake.pm:986 #, c-format msgid "" "The following new printers were found and Printerdrake can automatically set " "them up for you. If you do not want to have all of them set up, unselect the " "ones which should be skipped, or click \"Cancel\" to set up none of them.\n" msgstr "" "A seguinte nova impressora foi encontrada e o Printerdrake pode-a configurar " "automáticamente para si. Se não as quiser ter todas configuradas, desmarque " "as que devem ser ignoradas, ou clique \"Cancelar\".\n" #: printer/printerdrake.pm:987 #, c-format msgid "" "The following new printer was found and printerdrake can automatically set " "it up for you. If you do not want to have it set up, unselect it, or click " "\"Cancel\".\n" msgstr "" "A seguinte nova impressora foi encontrada e o printerdrake pode configurá-la " "automáticamente para si. Se não a quiser ter configurada, desmarque-a, ou " "clique \"Cancelar\".\n" #: printer/printerdrake.pm:988 #, c-format msgid "" "Note that for certain printer models additional packages need to be " "installed. So keep your installation media handy.\n" msgstr "" "Note que para certos modelos de impressoras certos pacotes adicionais " "precisam estar instalados. Então mantenha a sua média de instalação à mão.\n" #: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066 #, c-format msgid "Configuring printer on %s..." msgstr "Configurar Impressora em \"%s\"..." #: printer/printerdrake.pm:1049 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:1050 #, c-format msgid " on " msgstr " em " #: printer/printerdrake.pm:1051 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126 #, c-format msgid "Printer model selection" msgstr "Selecção do modelo da impressora" #: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127 #, c-format msgid "Which printer model do you have?" msgstr "Que modelo de impressora tem?" #: printer/printerdrake.pm:1058 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "O Printerdrake não consegue determinar o modelo da sua impressora %s. Por " "favor escolha o modelo correcto da lista." #: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Se a sua impressora não está na lista, escolha uma compatível (veja o manual " "da impressora) ou uma similar." #: printer/printerdrake.pm:1076 printer/printerdrake.pm:4685 #, c-format msgid "Configuring printer \"%s\"..." msgstr "A configurar Impressora \"%s\"..." #: printer/printerdrake.pm:1111 #, c-format msgid "" "Now you have turned off automatic printer setup.\n" "\n" msgstr "" "Agora desligou a configuração de impressora automática.\n" "\n" #: printer/printerdrake.pm:1112 #, c-format msgid "" "You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's " "main menu. " msgstr "" "Pode ligá-la novamente ao escolher \"%s\" -> \"%s\" no menu principal do " "Printerdrake." #: printer/printerdrake.pm:1112 printer/printerdrake.pm:4961 #, c-format msgid "Configure Auto Administration" msgstr "Configurar Auto Administração" #: printer/printerdrake.pm:1113 #, c-format msgid "" "There you can also choose in which situation automatic printer setup is done " "(On Printerdrake startup, on printing system startup, when connecting a new " "USB printer)." msgstr "" "Aqui pode também escolher em que situação a configuração automática de " "impressoras é feita (No inicio do Printerdrake, no inicio do sistema de " "impressão, quando a ligar uma nova impressora USB)." #: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273 #: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401 #: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543 #: printer/printerdrake.pm:4928 printer/printerdrake.pm:5115 #, c-format msgid "Add a new printer" msgstr "Adicionar uma nova impressora" #: printer/printerdrake.pm:1262 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Bemvindo ao Assistente de Configuração de Impressoras\n" "\n" "Este assistente permite-lhe instalar impressoras locais ou remotas para " "seremusadas a partir desta máquina e também a partir doutras maquinas na " "rede.\n" "\n" "Pergunta-lhe por todas as informações necessárias para configurar a " "impressora e dá-lhe acesso a todos os controladores de impressoras " "disponíveis, opções dos controlador, e tipos de ligação das impressoras." #: printer/printerdrake.pm:1275 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Bemvindo ao Assistente de Configuração da Impressão\n" "\n" "Este assistente irá ajuda-lo a instalar a(s) impressora(s) ligada(s) a este " "computador, ligadas directamente à rede ou a uma máquina Windows remota.\n" "\n" "Por favor ligue todas as impressoras conectadas a esta máquina para que " "possam ser auto detectadas. Também a sua rede de impressoras e as suas " "máquinas Windows têm de estar conectadas e ligadas.\n" "\n" "Note que auto-detectar impressoras em redes demora mais que uma auto " "detecção de impressoras apenas conectadas a esta máquina. Então desligue a " "auto-detecçãp da rede e/ou de impressoras Windows quando não precisa delas.\n" "\n" " Clique em \"Seguinte\" quando estiver pronto, ou em \"Cancelar\" se não " "quiser configurar agora a(s) sua(s) impressora(s)." #: printer/printerdrake.pm:1284 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Bemvindo ao Assistente de Configuração da Impressão\n" "\n" "Este assistente irá ajudá-lo a instalar a(s) impressora(s) conectada(s) a " "este computador.\n" "\n" "Por favor conecte e ligue todas as impressoras que tenham haver com esta " "máquina para que possam ser auto detectadas.\n" "\n" " Clique em \"Seguinte\" quando estiver pronto, ou em \"Cancelar\" se não " "quiser configurar agora a(s) sua(s) impressora(s)." #: printer/printerdrake.pm:1292 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Bemvindo ao Assistente de Configuração da Impressão\n" "\n" "Esta assistente vai ajudar-lo a instalar a(s) impressora(s) ligada(s) a este " "computador ou directamente à rede.\n" "\n" "Se tem impressora(s) ligada(s) a esta máquina, por favor conecte-a(s) a este " "computadore ligue-a(s) para que possam ser auto detectadas. Também a sua " "rede de impressoras tem de ser conectada e ligada.\n" "Note que auto detectar impressoras na rede leva mais tempo que a auto " "detecção de apenas impressoras conectadas nesta máquina. Então desligue a " "auto detecção da rede de impressoras se não precisa.\n" " Clique em \"Seguinte\" quando estiver pronto, ou em \"Cancelar\" se não " "quiser configurar agora a(s) sua(s) impressora(s)." #: printer/printerdrake.pm:1301 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Bemvindo ao Assistente de Configuração da Impressão\n" "\n" "Este assistente irá ajudá-lo a instalar a(s) impressora(s) ligada(s) a este " "computador.\n" "\n" "Se tem alguma impressora conectada a esta máquina, por favor ligue-a a este " "computador de maneira a que possa ser auto detectada.\n" "\n" " Clique em \"Seguinte\" quando estiver pronto, ou em \"Cancelar\" se não " "quiser configurar agora a(s) sua(s) impressora(s)." #: printer/printerdrake.pm:1352 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Auto-detectar as impressoras ligadas a esta máquina" #: printer/printerdrake.pm:1355 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Auto-detectar as impressoras ligadas directamente à rede local" #: printer/printerdrake.pm:1358 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Auto-detectar impressoras ligadas a uma máquina a correr Microsoft Windows" #: printer/printerdrake.pm:1361 #, c-format msgid "No auto-detection" msgstr "Sem autodetecção" #: printer/printerdrake.pm:1381 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "Parabéns, a sua impressora encontra-se instalada e configurada!\n" "\n" "Pode imprimir usando o comando \"Imprimir\" da sua aplicação (geralmente no " "menu \"Ficheiro\").\n" "\n" "Se deseja adicionar, remover, ou mudar o nome de uma impressora, ou se " "deseja mudar a opção da configuração predefinida (fonte de papel, qualidade " "de impressão, ...), escolha \"Impressora\" na secção \"Hardware\" do Centro " "de Controlo %s." #: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641 #: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796 #: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010 #: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268 #: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286 #: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495 #: printer/printerdrake.pm:2610 #, c-format msgid "Could not install the %s packages!" msgstr "Não não foi possível instalar os pacotes %s !" #: printer/printerdrake.pm:1419 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "Saltar a auto-detecção do servidor Windows/SMB" #: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564 #: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064 #, c-format msgid "Printer auto-detection" msgstr "Auto-detecção de impressoras" #: printer/printerdrake.pm:1425 #, c-format msgid "Detecting devices..." msgstr "A detectar dispositivos..." #: printer/printerdrake.pm:1451 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", impressora de rede \"%s\", porta %s" #: printer/printerdrake.pm:1454 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", impressora \"%s\" num servidor SMB/Windows \"%s\"" #: printer/printerdrake.pm:1458 #, c-format msgid "Detected %s" msgstr "Detectou %s" #: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490 #: printer/printerdrake.pm:1505 #, c-format msgid "Printer on parallel port #%s" msgstr "Impressora no cabo paralelo #%s" #: printer/printerdrake.pm:1469 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Impressora na rede \"%s\", porta %s" #: printer/printerdrake.pm:1472 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Impressora \"%s\" num servidor SMB/Windows \"%s\"" #: printer/printerdrake.pm:1550 #, c-format msgid "Local Printer" msgstr "Impressora local" #: printer/printerdrake.pm:1551 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Nenhuma impressora local encontrada ! Para instalar manualmente uma " "impressora escreva um nome de dispositivo/ficheiro na linha de entrada (Cabo " "Paralelo : /dev/lp0, /dev/lp1, ..., equivalente a LPT1:, LPT2:, ..., " "Primeira impressora USB : /dev/usb/lp0, segunda impressora USB : /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1555 #, c-format msgid "You must enter a device or file name!" msgstr "Deve digitar um nome de periférico ou nome de ficheiro!" #: printer/printerdrake.pm:1565 #, c-format msgid "No printer found!" msgstr "Nenhuma impressora encontrada!" #: printer/printerdrake.pm:1573 #, c-format msgid "Local Printers" msgstr "Impressoras locais" #: printer/printerdrake.pm:1574 #, c-format msgid "Available printers" msgstr "Impressoras disponíveis" #: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587 #, c-format msgid "The following printer was auto-detected. " msgstr "A impressora seguinte foi detectada automaticamente. " #: printer/printerdrake.pm:1580 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Se não é a que deseja configurar, escreva um nome de dispositivo/ficheiro na " "linha de entrada" #: printer/printerdrake.pm:1581 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "Alternativamente, pode especificar um nome de dispositivo/ficheiro na linha " "de entrada" #: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Aqui está a lista de todas as impressoras detectadas automaticamente. " #: printer/printerdrake.pm:1584 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Por favor escolha a impressora que deseja configurar ou escreva um nome de " "dispositivo/ficheiro na linha de entrada" #: printer/printerdrake.pm:1585 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Por favor escolha a impressora para a qual os trabalhos de impressão " "deveriam ser enviados.ou escreva um nome de dispositivo/ficheiro na linha de " "entrada" #: printer/printerdrake.pm:1589 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "A configuração da impressora vai ser inteiramente automática. Se a sua " "impressora não foi correctamente detectada ou se prefere personalizar a " "configuração, carregue em \"Configuração Manual\"." #: printer/printerdrake.pm:1590 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Actualmente, não há nenhuma alternativa disponivel possível" #: printer/printerdrake.pm:1593 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "Por favor escolha a impressora que deseja configurar. A configuração da " "impressora vai ser inteiramente automática. Se a sua impressora não foi " "correctamente detectada ou se prefere personalizar a configuração, ligue a " "\"Configuração Manual\"." #: printer/printerdrake.pm:1594 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "" "Por favor escolha a impressora para a qual os trabalhos de impressão devem " "ir." #: printer/printerdrake.pm:1596 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Por favor escolha a ficha em que a sua impressora está ligada ou escreva um " "nome de dispositivo/ficheiro na linha de entrada" #: printer/printerdrake.pm:1597 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Por favor escolha a ficha em que a sua impressora está ligada." #: printer/printerdrake.pm:1599 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Cabo Paralelo : /dev/lp0, /dev/lp1, ..., equivalente a LPT1:, LPT2:, ..., " "Primeira impressora USB : /dev/usb/lp0, segunda impressora USB : /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1603 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Deve escolher/entrar um dispositivo/impressora!" #: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706 #: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936 #: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179 #: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279 #: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299 #, c-format msgid "Aborting" msgstr "Abortar" #: printer/printerdrake.pm:1679 #, c-format msgid "Remote lpd Printer Options" msgstr "Opções da impressora lpd Remota" #: printer/printerdrake.pm:1680 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Para usar uma fila de impressão lpd remota, precisa indicar o nome do " "servidor de impressão e o nome da impressora naquele servidor." #: printer/printerdrake.pm:1681 #, c-format msgid "Remote host name" msgstr "Nome do endereço remoto" #: printer/printerdrake.pm:1682 #, c-format msgid "Remote printer name" msgstr "Nome da impressora remota" #: printer/printerdrake.pm:1685 #, c-format msgid "Remote host name missing!" msgstr "Nome de endereço remoto em falta!" #: printer/printerdrake.pm:1689 #, c-format msgid "Remote printer name missing!" msgstr "Falta o nome da impressora remota!" #: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195 #: printer/printerdrake.pm:2318 standalone/drakTermServ:447 #: standalone/drakTermServ:769 standalone/drakTermServ:785 #: standalone/drakTermServ:1591 standalone/drakTermServ:1600 #: standalone/drakTermServ:1614 standalone/drakbackup:512 #: standalone/drakbackup:618 standalone/drakbackup:653 #: standalone/drakbackup:754 standalone/draknfs:203 #: standalone/draksambashare:629 standalone/draksambashare:796 #: standalone/harddrake2:276 #, c-format msgid "Information" msgstr "Informação" #: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195 #: printer/printerdrake.pm:2318 #, c-format msgid "Detected model: %s %s" msgstr "Modelo detectado : %s %s" #: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064 #, c-format msgid "Scanning network..." msgstr "A procurar na rede..." #: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", impressora \"%s\" no servidor \"%s\"" #: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Impressora \"%s\" no servidor \"%s\"" #: printer/printerdrake.pm:1859 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opções de Impressão SMB (Windows 9x/NT)" #: printer/printerdrake.pm:1860 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Para imprimir numa impressora SMB, precisa indicar o nome do endereço SMB " "(Nota! Pode ser diferente do endereço TCP/IP!) e possivelmente o endereço IP " "do servidor de impressão, assim como nome de partilha para a impressora que " "deseja aceder e qualquer informação aplicável sobre nome de utilizador, " "senha e grupo de trabalho." #: printer/printerdrake.pm:1861 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Se a impressora desejada foi auto-detectada, pegue-a simplesmente na lista " "e então adicione um nome de utilizador, uma senha e um grupo de trabalho se " "necessário." #: printer/printerdrake.pm:1863 #, c-format msgid "SMB server host" msgstr "Endereço do servidor SMB" #: printer/printerdrake.pm:1864 #, c-format msgid "SMB server IP" msgstr "IP do servidor SMB" #: printer/printerdrake.pm:1865 standalone/draksambashare:67 #, c-format msgid "Share name" msgstr "Nome de partilha" #: printer/printerdrake.pm:1868 #, c-format msgid "Workgroup" msgstr "Grupo de trabalho" #: printer/printerdrake.pm:1870 #, c-format msgid "Auto-detected" msgstr "Auto-detectado" #: printer/printerdrake.pm:1880 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Deve ser dado ou o nome de servidor ou o seu endereço IP!" #: printer/printerdrake.pm:1884 #, c-format msgid "Samba share name missing!" msgstr "Falta o nome da partilha Samba!" #: printer/printerdrake.pm:1890 #, c-format msgid "SECURITY WARNING!" msgstr "ALERTA DE SEGURANÇA!" #: printer/printerdrake.pm:1891 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Está prestes a configurar a impressão para uma conta Windows com senha. " "Devido a uma falha na arquitectura do programa cliente Samba a senha é " "indicada em texto claro na linha de comandos do cliente Samba usado para " "transmitir o trabalho de impressão para ao servidor Windows. Então é " "possível para cada utilizador nesta máquina ver a senha com um comando do " "tipo \"ps auxwww\".\n" "\n" "Recomendamos uma das seguintes alternativas (em todos os casos tem de ter a " "certeza que só as maquinas da sua rede local se podem ligar ao servidor " "Windows, por exemplo por meio de uma firewall):\n" "\n" "Use uma conta sem senha no servidor Windows, como a conta \"GUEST\"ou uma " "conta especial só para impressão. Não retire a protecção da senha de uma " "conta pessoal ou da conta de administrador.\n" "\n" "Configure o servidor Windows para colocar a impressora disponível sob o " "protocolo LPD. A seguir configure a impressão nesta maquina com a ligação " "tipo \"%s\" no Printerdrake.\n" "\n" #: printer/printerdrake.pm:1901 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Configure o servidor Windows para colocar a impressora disponível sob o " "protocolo IPP e configure a impressão a partir desta máquina com a ligação " "do tipo \"%s\" no Printerdrake.\n" #: printer/printerdrake.pm:1904 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Ligue a sua impressora a um servidor Linux e deixe as suas maquinas Windows " "ligarem-se a este como clientes.\n" "\n" "Deseja mesmo continuar a configurar esta impressora como está a fazer agora?" #: printer/printerdrake.pm:1983 #, c-format msgid "NetWare Printer Options" msgstr "Opções de Impressão NetWare" #: printer/printerdrake.pm:1984 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Para imprimir numa impressora NetWare, precisa indicar o nome do servidor de " "impressão NetWare (Nota: ele pode ser diferente do servidor TCP/IP!) como " "também o nome da fila de impressão para a impressora que deseja aceder e " "qualquer nome de utilizador e senha aplicável." #: printer/printerdrake.pm:1985 #, c-format msgid "Printer Server" msgstr "Servidor de Impressão" #: printer/printerdrake.pm:1986 #, c-format msgid "Print Queue Name" msgstr "Nome da Fila de Impressão" #: printer/printerdrake.pm:1991 #, c-format msgid "NCP server name missing!" msgstr "Falta o nome do servidor NCP!" #: printer/printerdrake.pm:1995 #, c-format msgid "NCP queue name missing!" msgstr "Falta o nome da fila NCP!" #: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097 #, c-format msgid ", host \"%s\", port %s" msgstr ", endereço \"%s\", porta %s" #: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100 #, c-format msgid "Host \"%s\", port %s" msgstr "Endereço \"%s\", porta %s" #: printer/printerdrake.pm:2122 #, c-format msgid "TCP/Socket Printer Options" msgstr "Opções do TCP/Socket da Impressora" #: printer/printerdrake.pm:2124 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Escolha uma das impressoras auto-detectadas na lista ou escreva o nome de " "máquina ou o IP e o número da porta opcional (9100 é a predefinida) nos " "campos de entrada." #: printer/printerdrake.pm:2125 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Para imprimir numa impressora TCP ou 'socket', precisa indicar o nome do " "servidor ou o IP da impressora e o número da porta (opcional). Nos " "servidores HP JetDirect a porta é normalemente 9100, nos outros servidores " "pode ser diferente. Leia o manual do seu hardware." #: printer/printerdrake.pm:2129 #, c-format msgid "Printer host name or IP missing!" msgstr "Nome do endereço ou IP da impressora em falta!" #: printer/printerdrake.pm:2158 #, c-format msgid "Printer host name or IP" msgstr "Nome do Servidor da impressora ou IP" #: printer/printerdrake.pm:2221 #, c-format msgid "Refreshing Device URI list..." msgstr "A refrescar a lista do Dispositivo URI..." #: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226 #, c-format msgid "Printer Device URI" msgstr "Dispositivo de Impressão URI" #: printer/printerdrake.pm:2225 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Pode indicar directamente a URI para aceder à impressora. A URI deve ser " "conforme às especificações CUPS ou Foomatic. Note que todos os tipos de URI " "são suportados por todos as filas de impressão." #: printer/printerdrake.pm:2249 #, c-format msgid "A valid URI must be entered!" msgstr "Uma URI válida deve ser entrada!" #: printer/printerdrake.pm:2354 #, c-format msgid "Pipe into command" msgstr "Envia o trabalho para o comando" #: printer/printerdrake.pm:2355 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Aqui pode especificar qualquer linha de comando arbitrária na qual o " "trabalho deve ser canalizado em vez de enviar directamente para uma " "impressora." #: printer/printerdrake.pm:2356 #, c-format msgid "Command line" msgstr "Linha de comando" #: printer/printerdrake.pm:2360 #, c-format msgid "A command line must be entered!" msgstr "Uma linha de comando deve ser digitada!" #: printer/printerdrake.pm:2402 #, c-format msgid "Your printer %s is currently connected %s." msgstr "A sua impressora %s está actualmente conectada %s." #: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411 #, c-format msgid "to a parallel port" msgstr " numa porta paralela" #: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412 #, c-format msgid "to the USB" msgstr "a uma porta USB" #: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413 #, c-format msgid "via the network" msgstr "através da rede" #: printer/printerdrake.pm:2407 #, c-format msgid "This type of connection is currently not fully supported by HPLIP." msgstr "" "Este tipo de conexão actualmente não é totalmente suportado pelo HPLIP." #: printer/printerdrake.pm:2409 #, c-format msgid "You get full HPLIP support for your device if you connect it " msgstr "Pode ter um suporte completo para o seu dispositivo se o ligar " #: printer/printerdrake.pm:2415 #, c-format msgid "" "You can now set up your device with HPLIP anyway (works in many cases), " msgstr "" "Pode agora configurar o seu dispositivo com o HPLIP (funciona na maioria dos " "casos), " #: printer/printerdrake.pm:2416 #, c-format msgid "set it up without HPLIP (print-only), " msgstr "configurar sem HPLIP (imprimir-apenas), " #: printer/printerdrake.pm:2416 #, c-format msgid "or" msgstr "ou" #: printer/printerdrake.pm:2417 #, c-format msgid "cancel the setup (for example to reconnect your device)." msgstr "" "cancelar a configuração (p. ex. para voltar a ligar o seu dispositivo)." #: printer/printerdrake.pm:2419 #, c-format msgid "" "You can always revise your choice by clicking your printer's entry in the " "main window, " msgstr "" "Pode sempre mudar a sua escolha carregando na linha da impressora na janela " "principal, " #: printer/printerdrake.pm:2420 #, c-format msgid "clicking the \"%s\" button, " msgstr "carregando no botão \"%s\", " #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302 #: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319 #: standalone/drakvpn:680 standalone/printerdrake:245 #, c-format msgid "Edit" msgstr "Editar" #: printer/printerdrake.pm:2421 #, c-format msgid "and choosing \"%s\"." msgstr "e escolhendo \"%s\"." #: printer/printerdrake.pm:2421 printer/printerdrake.pm:5311 #: printer/printerdrake.pm:5371 #, c-format msgid "Printer connection type" msgstr "Tipo de conexão da impressora" #: printer/printerdrake.pm:2423 standalone/logdrake:409 #, c-format msgid "What do you want to do?" msgstr "O que deseja fazer?" #: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427 #, c-format msgid "Set up with HPLIP" msgstr "Configurar com HPLIP" #: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429 #, c-format msgid "Set up without HPLIP" msgstr "Configurar sem HPLIP" #: printer/printerdrake.pm:2426 #, c-format msgid "Cancel setup" msgstr "Cancelar a configuração" #: printer/printerdrake.pm:2460 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" "Em muitas impressoras HP há algumas funções especiais disponíveis, a " "manutenção (nível de tinta, limpeza, alinhamento da cabeça, ...) em todos os " "inkjets não muito antigos, pesquisa em dispositivos multi-funções, e cartões " "de memória em impressoras com leitores de cartões." #: printer/printerdrake.pm:2462 #, c-format msgid "" "To access these extra functions on HP printers they must be set up with " "HPLIP (HP Linux Imaging and Printing). " msgstr "" "Para aceder a estas funções extra na sua impressora HP, deve ser configurada " "com HPLIP (HP Linux Imaging and Printing)." #: printer/printerdrake.pm:2464 #, c-format msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? " msgstr "Deseja utilizar HPLIP (escolha \"Nenhum\" para impressoras não-HP)? " #: printer/printerdrake.pm:2490 #, c-format msgid "Installing %s package..." msgstr "A instalar o pacote %s..." #: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496 #: printer/printerdrake.pm:2524 #, c-format msgid "HPLIP" msgstr "HPLIP" #: printer/printerdrake.pm:2497 #, c-format msgid "Only printing will be possible on the %s." msgstr "Impressão apenas será possível em %s." #: printer/printerdrake.pm:2512 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" "Não foi possível remover o seu antigo ficheiro de configuração HPOJ %s para " "a sua %s! " #: printer/printerdrake.pm:2514 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "Por favor remova o ficheiro manualmente e reinicie o HPOJ." #: printer/printerdrake.pm:2524 #, c-format msgid "Checking device and configuring %s..." msgstr "Verificar o dispositivo e configurar %s..." #: printer/printerdrake.pm:2544 #, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "Que impressora deseja configurar com o HPLIP?" #: printer/printerdrake.pm:2599 #, c-format msgid "Installing SANE packages..." msgstr "A instalar os pacotes SANE..." #: printer/printerdrake.pm:2612 #, c-format msgid "Scanning on the %s will not be possible." msgstr "Não será possivel digitalizar em %s." #: printer/printerdrake.pm:2627 #, c-format msgid "Using and Maintaining your %s" msgstr "A Usar e a Gerir a sua %s" #: printer/printerdrake.pm:2641 #, c-format msgid "Configuring device..." msgstr "Dispositivo de configuração..." #: printer/printerdrake.pm:2678 #, c-format msgid "Making printer port available for CUPS..." msgstr "A tornar disponivel a porta de impressão para CUPS..." #: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962 #: printer/printerdrake.pm:3115 #, c-format msgid "Reading printer database..." msgstr "A ler base de dados das impressoras..." #: printer/printerdrake.pm:2920 #, c-format msgid "Enter Printer Name and Comments" msgstr "Escreva o Nome da Impressora e os Comentarios" #: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "O nome da impressora deve apenas conter letras, números e traços baixos" #: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "A impressora \"%s\" já existe,\n" "deseja realmente sobrepor a sua configuração?" #: printer/printerdrake.pm:2937 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" "A impressora chamada \"%s! tem mais de 12 caracteres o que pode pôr a " "impressora inacessível para clientes Windows. Quer realmente usar este nome?" #: printer/printerdrake.pm:2946 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Toda a impressora precisa de um nome (por exemplo \"impressora\"). Os campos " "de Descrição e Localização não são obrigatórios. São só comentarios para os " "utilizadores." #: printer/printerdrake.pm:2947 #, c-format msgid "Name of printer" msgstr "Nome da impressora" #: printer/printerdrake.pm:2948 standalone/drakconnect:592 #: standalone/harddrake2:39 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Description" msgstr "Descrição" #: printer/printerdrake.pm:2949 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "Location" msgstr "Localização" #: printer/printerdrake.pm:2967 #, c-format msgid "Preparing printer database..." msgstr "A preparar a base de dados das impressoras..." #: printer/printerdrake.pm:3093 #, c-format msgid "Your printer model" msgstr "O seu modelo de impressora" #: printer/printerdrake.pm:3094 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "O Printerdrake comparou o nome do modelo auto-detectado com os modelos na " "sua base de dados para encontrar a melhor escolha. O resultado pode ser " "errado, sobretudo se a sua impressora não existe na base de dados. Portanto " "verifique se a escolha foi correcta e clique em\"O modelo está correcto\" se " "sim, se não, clique em \"Escolher o modelo manualmente\" para que possa " "escolher o modelo desejado manualmente no próximo ecrã.\n" "\n" "Para a sua impressora o Printerdrake encontrou:\n" "\n" "%s" #: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102 #, c-format msgid "The model is correct" msgstr "O modelo está correcto" #: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101 #: printer/printerdrake.pm:3104 #, c-format msgid "Select model manually" msgstr "Escolha o modelo manualmente" #: printer/printerdrake.pm:3128 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "Por favor verifique se o Printerdrake fez a auto detecção do modelo da sua " "impressora correctamente. Procure o modelo correcto na lista quando um " "modelo errado ou a \"Impressão directa\" é indicado." #: printer/printerdrake.pm:3147 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "Instalar um ficheiro PPD fornecido pelo fabricante" #: printer/printerdrake.pm:3179 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" "Todas as impressoras PostScript são entregues com um ficheiro PPD que " "descreve as características e as opções da impressora." #: printer/printerdrake.pm:3180 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" "Este ficheiro usualmente encontra-se no CD que contém os controladores para " "Windows e Mac que acompanha a impressora." #: printer/printerdrake.pm:3181 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "Pode encontrar os ficheiros PPD nos sítios web dos fabricantes." #: printer/printerdrake.pm:3182 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" "Se tem o Windows instalado na sua máquina, pode igualmente encontrar o " "ficheiro PPD na sua partição Windows." #: printer/printerdrake.pm:3183 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" "Ao instalar o ficheiro PPD da impressora e usando-o quando configurar a " "impressora torna todas as opções da impressora disponiveis que são " "providenciads pelo hardware da impressora" #: printer/printerdrake.pm:3184 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" "Aqui pode escolher o ficheiro PPD a ser instalado na sua máquina, será então " "usado para configurar a sua impressora." #: printer/printerdrake.pm:3186 #, c-format msgid "Install PPD file from" msgstr "Instalar ficheiro PPD a partir de" #: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "Disquete" #: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "Outro local" #: printer/printerdrake.pm:3205 #, c-format msgid "Select PPD file" msgstr "Seleccione ficheiro PPD" #: printer/printerdrake.pm:3209 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "O ficheiro PPD %s não existe ou está ilegível!" #: printer/printerdrake.pm:3215 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "O ficheiro PPD %s não está de acordo com as especificações PPD!" #: printer/printerdrake.pm:3226 #, c-format msgid "Installing PPD file..." msgstr "A instalar o ficheiro PPD..." #: printer/printerdrake.pm:3345 #, c-format msgid "OKI winprinter configuration" msgstr "Configuração da OKI winprinter" #: printer/printerdrake.pm:3346 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Está a configurar uma impressora OKI laser winimpressora. Estas impressoras\n" "usam um protocolo de impressão muito especial e só podem funcionar ligadas à " "primeira porta paralela. Quando a sua impressora está ligada a outra porta " "ou a um servidor de impressão, por favor conecte a impressora à primeira " "porta paralela antes do imprimir uma página teste.Senão a impressora não irá " "funcionar. A sua definição do tipo de conexão será ignorado pelo controlador." #: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401 #, c-format msgid "Lexmark inkjet configuration" msgstr "Configuração das Lexmark a jacto de tinta" #: printer/printerdrake.pm:3372 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Os controladores das impressoras a jacto de tinta fornecidos pela Lexmark " "apenas suportam impressoras locais, não impressoras em máquinas remotas ou " "num servidor de impressão. Por favor ligue a sua impressora localmente ou " "configure-a na máquina à qual se encontra ligada." #: printer/printerdrake.pm:3402 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Para poder imprimir com a sua Lexmark a jacto de tinta e esta configuração, " "precisa dos controladores fornecidos pela Lexmark (http://www.lexmark.com/). " "Clique na hiper-ligação \"Controladores\". A seguir escolha o seu modelo e " "depois \"Linux\" como sistema operativo. Os controladores vêm como pacotes " "RPM ou scripts Shell com instalação gráfica interactiva. Não precisa fazer " "esta configuração pelos interfaces gráficos. Após o acordo de licença, " "cancele directamente. A seguir imprima os alinhamentos dos cabeçalhos das " "páginas de controlo com o \"lexmarkmaintain\" e configure as definições de " "alinhamento do cabeçalho da página com este programa." #: printer/printerdrake.pm:3412 #, c-format msgid "Lexmark X125 configuration" msgstr "Configuração da Lexmark X125" #: printer/printerdrake.pm:3413 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "O controlador desta impressora apenas suporta impressoras locais conectadas " "via USB, não suporta impressoras em máquina remotas nem servidores de " "impressão. Por favor ligue a sua impressora a uma porta USB local ou " "configure-a na máquina à qual está ligada." #: printer/printerdrake.pm:3435 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Configuração do Samsung ML/QL-85G" #: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" "O controlador para esta impressora apenas suporta impressoras conectadas " "localmente na primeira porta paralela, nenhumas impressores em máquinas " "remotas ou caixas de servidores de impressão ou em qualquer outra porta " "paralela. Por favor conecte a sua impressora na primeira porta paralela ou " "configure-a na máquina onde está ligada." #: printer/printerdrake.pm:3462 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "Configuração da Canon LBP-460/660" #: printer/printerdrake.pm:3489 #, c-format msgid "Canon LBP-810/1120 (CAPT) configuration" msgstr "Configuração da Canon LBP-810/1120 (CAPT)" #: printer/printerdrake.pm:3490 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes or on the parallel " "port. Please connect your printer to the USB or configure it on the machine " "where it is directly connected to." msgstr "" "O controlador desta impressora apenas suporta impressoras locais ligadas via " "USB, sem impressoras em máquinas remotas ou sem servidores de impressão ou " "na porta paralela. Por favor ligue a sua impressora a uma porta USB ou " "configure-a na máquina onde está directamente ligada." #: printer/printerdrake.pm:3497 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Transferência do firmware para HP LaserJet 1000" #: printer/printerdrake.pm:3647 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Configuração predefinida da Impressora\n" "\n" "Deve assegurar-se que o tamanho do papel e o tipo de tinta/impressão (se " "disponíveis) e também a configuração do hardware das impressoras laser " "(memória, opções) estão configurados correctamente. Note que com uma " "impressão muito alta de qualidade/resolução, imprimir pode tornar-se " "bastante lento." #: printer/printerdrake.pm:3772 #, c-format msgid "Printer default settings" msgstr "Parâmetros predefinidos da impressora" #: printer/printerdrake.pm:3779 #, c-format msgid "Option %s must be an integer number!" msgstr "A opção %s deve ser um numero inteiro!" #: printer/printerdrake.pm:3783 #, c-format msgid "Option %s must be a number!" msgstr "A opção %s deve ser um número!" #: printer/printerdrake.pm:3787 #, c-format msgid "Option %s out of range!" msgstr "A opção %s está fora de alcance!" #: printer/printerdrake.pm:3839 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Deseja definir esta impressora (\"%s\")\n" "como impressora padrão?" #: printer/printerdrake.pm:3855 #, c-format msgid "Test pages" msgstr "Páginas de teste" #: printer/printerdrake.pm:3856 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Por favor escolha as paginas de teste que deseja imprimir.\n" "Nota : a pagina de fotos pode tomar bastante tempo a imprimir e as " "impressoras laser com pouca memória podem até nem conseguir imprimir. Na " "maioria dos casos é suficiente imprimir a página de teste padrão." #: printer/printerdrake.pm:3860 #, c-format msgid "No test pages" msgstr "Sem páginas teste" #: printer/printerdrake.pm:3861 #, c-format msgid "Print" msgstr "Imprimir" #: printer/printerdrake.pm:3886 #, c-format msgid "Standard test page" msgstr "Página de teste padrão" #: printer/printerdrake.pm:3889 #, c-format msgid "Alternative test page (Letter)" msgstr "Página de teste alternativa (Letter)" #: printer/printerdrake.pm:3892 #, c-format msgid "Alternative test page (A4)" msgstr "Página de teste alternativa (A4)" #: printer/printerdrake.pm:3894 #, c-format msgid "Photo test page" msgstr "Página de teste com fotos" #: printer/printerdrake.pm:3907 #, c-format msgid "Printing test page(s)..." msgstr "A imprimir página(s) teste..." #: printer/printerdrake.pm:3927 #, c-format msgid "Skipping photo test page." msgstr "Saltar a página de teste com fotos" #: printer/printerdrake.pm:3944 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "A(s) página(s) foram enviada(s) para a impressora.\n" "Pode demorar algum tempo antes da impressão começar.\n" "Estado da impressão:\n" "%s\n" "\n" #: printer/printerdrake.pm:3948 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "A(s) página(s) foram enviada(s) para a impressora.\n" "Pode demorar algum tempo antes da impressão começar.\n" #: printer/printerdrake.pm:3958 #, c-format msgid "Did it work properly?" msgstr "Funcionou correctamente?" #: printer/printerdrake.pm:3982 #, c-format msgid "Raw printer" msgstr "Impressora directa" #: printer/printerdrake.pm:4004 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Para imprimir um ficheiro a partir da linha de comando (janela de sessão) " "pode usar o comando \"%s ou uma ferramenta de impressão gráfica: " "\"xpp \". A ferramenta gráfica permite-lhe escolher mais " "facilmente a impressora a usar e as opções de configuração.\n" #: printer/printerdrake.pm:4006 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Estes comandos também pode usar no campo \"Comando de impressão\" " "dosdiálogos de impressão de muitas aplicações, mas não ponha aqui o nome do " "ficheiro porque o ficheiro a imprimir é providenciado pela aplicação.\n" #: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026 #: printer/printerdrake.pm:4036 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "O comando \"%s\" também permite modificar a opção de para uma tarefa de " "impressão particular. Basta adicionar os parâmetros desejados na linha de " "comando, ex. \"%s \". " #: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Para saber acerca das opções disponíveis para a impressora actual, leia a " "lista abaixo ou clique no botão \"Imprimir a lista das opções\".%s%s%s\n" #: printer/printerdrake.pm:4016 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Aqui tem uma lista das opções disponíveis para a impressora actual :\n" "\n" #: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Para imprimir um ficheiro a partir da linha de comando (janela de sessão) " "use o comando \"%s \".\n" #: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033 #: printer/printerdrake.pm:4043 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Este comando também pode usar no campo \"Comando de impressão\" dos dialogos " "de impressão de muitas aplicações. Mas aqui não forneça o nome ficheiro " "porque o ficheiro a imprimir é provienciado pela aplicação.\n" #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Para obter uma lista das opções disponíveis para a impressora actual clique " "no botão \"Imprimir a lista das opções\"." #: printer/printerdrake.pm:4041 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Para imprimir um ficheiro a partir da linha de comando (janela de terminal) " "use o comando \"%s \" ou \"%s \".\n" #: printer/printerdrake.pm:4045 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Pode também usar o interface gráfico \"xpdq\" para definir as opções e gerir " "as tarefas de impressão.\n" "Se estiver a usar o KDE como ambiente de trabalho, tem um \"botão de pânico" "\", um ícone no ecrâ, chamado \"PARAR Impressora\", que pára todas as " "tarefas de impressão imediatamente quando clica nele. Isto é por exemplo " "útil no caso de faltar o papel.\n" #: printer/printerdrake.pm:4049 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Os comandos \"%s\" e \"%s\" também permitem mudar a configuração de uma " "tarefa de impressão particular. Basta adicionar os parâmetros desejados na " "linha de comando, ex. \"%s \".\n" #: printer/printerdrake.pm:4058 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Usar/Gerir a impressora \"%s\"" #: printer/printerdrake.pm:4059 #, c-format msgid "Printing on the printer \"%s\"" msgstr "A imprimir na impressora \"%s\"" #: printer/printerdrake.pm:4065 #, c-format msgid "Print option list" msgstr "Lista das opções da impressora" #: printer/printerdrake.pm:4069 #, c-format msgid "Printing option list..." msgstr "Lista das opções da impressora..." #: printer/printerdrake.pm:4087 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" "A sua %s está configurada com o controlador de software HPLIP da HP. Assim " "muitas opções especiais da sua impressora são suportadas.\n" "\n" #: printer/printerdrake.pm:4090 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" "O scanner na sua impressora pode ser usado com o usual software SANE, por " "exemplo o Kooka ou o XSane (Ambos no menu Multimédia/Gráficos)" #: printer/printerdrake.pm:4091 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to " "share your scanner on the network.\n" "\n" msgstr "" "Execute o Scannerdrake (no Mandriva Linux Control em Hardware/Scanner) para " "partilhar o seu scanner na rede.\n" "\n" #: printer/printerdrake.pm:4095 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" "Os leitores de cartões de memória da sua impressora podem ser acedidos como " "um normal dispositivo de armazenamento USB. " #: printer/printerdrake.pm:4096 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" "A seguir a ter inserido um cartão, um ícone do disco rígido para aceder o " "cartão deverá aparecer nos seu ecrâ.\n" "\n" #: printer/printerdrake.pm:4098 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" "Os leitores de cartões de memória da sua impressora podem ser acedidos " "usando a Ferramenta de Impressão HP (Menu: Sistema/Monitorização/ Ferramenta " "de Impressão HP) ao clicar no botão \"Aceder Cartões de Fotografia...\" na " "parte das \"Funções\". " #: printer/printerdrake.pm:4099 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" "Note que isto é muito lento, a leitura das imagens a partir da câmara ou um " "leitor de cartões USB é normalmente mais rápido.\n" "\n" #: printer/printerdrake.pm:4102 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" "A Ferramenta de Impressão HP (Menu: Sistema/Monitorização/Ferramenta de " "Impressão HP) oferece muitos estados de monitorização e funções de " "manutenção para a sua %s:\n" "\n" #: printer/printerdrake.pm:4103 #, c-format msgid " - Ink level/status info\n" msgstr " - nível de tinta/informação do estado\n" #: printer/printerdrake.pm:4104 #, c-format msgid " - Ink nozzle cleaning\n" msgstr " - limpeza do bocal de tinta\n" #: printer/printerdrake.pm:4105 #, c-format msgid " - Print head alignment\n" msgstr " - Alinhamento da cabeça de impressão\n" #: printer/printerdrake.pm:4106 #, c-format msgid " - Color calibration\n" msgstr " - Calibração da cor\n" #: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174 #: printer/printerdrake.pm:4209 #, c-format msgid "Transfer printer configuration" msgstr "Transferir a configuração da impressora" #: printer/printerdrake.pm:4148 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Pode copiar a configuração de impressora que fez para a fila %s para %s, a " "sua fila actual. Todos os dados de configuração (nome da impressora, " "descrição, localização, tipo de ligação, e configuração predefinida) são " "tomados, mas a tarefas em fila não serão transferidas.\n" "Nem todas as tarefas podem ser transferidas pelas seguintes razões:\n" #: printer/printerdrake.pm:4151 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS não suporta as impressoras em servidores Novell ou impressoras a enviar " "os dados para um comando livremente-escrito.\n" #: printer/printerdrake.pm:4153 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ só suporta impressoras locais, impressoras LPD remotas, e impressoras " "TCP/Socket.\n" #: printer/printerdrake.pm:4155 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD e LPRng não suportam impressoras IPP.\n" #: printer/printerdrake.pm:4157 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Em adição, filas não criadas com este programa ou com definições \"foomatic-" "configure\" não podem ser transferidas." #: printer/printerdrake.pm:4158 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Também as impressoras configuradas com ficheiros PPD fornecidos pelos " "fabricantes ou com controladores CUPS nativos não podem ser transferidas." #: printer/printerdrake.pm:4159 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Marque as impressoras que deseja transferir e clique em \n" "\"Transferir\"." #: printer/printerdrake.pm:4162 #, c-format msgid "Do not transfer printers" msgstr "Não transferir impressoras" #: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179 #, c-format msgid "Transfer" msgstr "Transferir" #: printer/printerdrake.pm:4175 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Uma impressora chamada \"%s\" já existe em %s. \n" "Clique \"Transferir\" para a sobrescrever.\n" "Também pode escrever um novo nome ou saltar esta impressora." #: printer/printerdrake.pm:4196 #, c-format msgid "New printer name" msgstr "Novo nome de impressora" #: printer/printerdrake.pm:4199 #, c-format msgid "Transferring %s..." msgstr "A transferir %s ..." #: printer/printerdrake.pm:4210 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Acabou de transferir a sua anterior impressora padrão (\"%s\"). Deve ser " "esta também a impressora padrão no novo sistema de impressão %s?" #: printer/printerdrake.pm:4220 #, c-format msgid "Refreshing printer data..." msgstr "A refrescar os dados da impressora..." #: printer/printerdrake.pm:4230 #, c-format msgid "Starting network..." msgstr "A iniciar a rede..." #: printer/printerdrake.pm:4273 printer/printerdrake.pm:4277 #: printer/printerdrake.pm:4279 #, c-format msgid "Configure the network now" msgstr "Configurar a rede agora" #: printer/printerdrake.pm:4274 #, c-format msgid "Network functionality not configured" msgstr "Funcionalidade da rede não configurada" #: printer/printerdrake.pm:4275 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Vai configurar uma impressora remota. Isto precisa de um acesso à rede " "funcional, mas a sua rede ainda não está configurada. Se vai continuar sem a " "configuração da rede, não irá ser capaz de usar a impressora que está agora " "a configurar. Como quer proceder?" #: printer/printerdrake.pm:4278 #, c-format msgid "Go on without configuring the network" msgstr "Continuar sem configurar a rede" #: printer/printerdrake.pm:4309 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "A configuração de rede efectuada durante a instalação não pode ser iniciada " "agora. Por favor verifique se a rede está acessível depois de arrancar o " "sistema e corriga a configuração através do Centro de Controlo %s, na secção " "\"Rede e Internet\"/\"Conexão\", e depois configure a impressora, também com " "o Centro de Controlo %s, na secção \"Hardware\"/\"Impressora\"" #: printer/printerdrake.pm:4310 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "O acesso à rede não estava a correr e não pôde ser iniciado. Por favor " "verifique a sua configuração e o seu hardware. Tente então configurar a sua " "impressora remota novamente." #: printer/printerdrake.pm:4320 #, c-format msgid "Restarting printing system..." msgstr "A reiniciar o sistema de impressão..." #: printer/printerdrake.pm:4351 #, c-format msgid "high" msgstr "alto" #: printer/printerdrake.pm:4351 #, c-format msgid "paranoid" msgstr "paranóico" #: printer/printerdrake.pm:4353 #, c-format msgid "Installing a printing system in the %s security level" msgstr "A instalar um sistema de impressão no nível de segurança %s" #: printer/printerdrake.pm:4354 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Esta prestes a instalar o sistema de impressão %s num sistema a correr no " "nível de segurança %s.\n" "Este sistema de impressão corre um servidor (processo em 2º plano) que " "espera tarefas de impressão e trata destas. Este servidor é também acessível " "por máquinas remotas através da rede e então é um possível ponto para " "ataques. Então apenas uns quantos servidores seleccionados são iniciados por " "omissão neste nível de segurança.\n" "\n" "Deseja realmente configurar a impressão nesta máquina?" #: printer/printerdrake.pm:4390 #, c-format msgid "Starting the printing system at boot time" msgstr "A iniciar o sistema de impressão no arranque" #: printer/printerdrake.pm:4391 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "O sistema de impressão (%s) não vai ser iniciado automáticamente quando a " "máquina arranca.\n" "\n" "É possível que o arranque automático tenha sido desactivado ao mudar para um " "nível de segurança superior, pois o sistema de impressão é uma ponto " "potencial para ataques.\n" "\n" "Deseja ter um arranque automático do sistema de impressão activado novamente?" #: printer/printerdrake.pm:4414 #, c-format msgid "Checking installed software..." msgstr "A verificar o software instalado..." #: printer/printerdrake.pm:4420 #, c-format msgid "Removing %s..." msgstr "A remover %s ..." #: printer/printerdrake.pm:4424 #, c-format msgid "Could not remove the %s printing system!" msgstr "Não foi possível remover o sistema de impressão %s !" #: printer/printerdrake.pm:4448 #, c-format msgid "Installing %s..." msgstr "A instalar %s ..." #: printer/printerdrake.pm:4452 #, c-format msgid "Could not install the %s printing system!" msgstr "Não conseguiiu instalar o sistema de impressão %s !" #: printer/printerdrake.pm:4520 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" "Neste modo não há um sistema local de impressão, todos os pedidos de " "impressão vão directamente para o servidor especificado em baixo. Note que " "não é possível definir filas de impressão locais, então se o servidor " "especificado estiver em baixo não pode nada impresso a partir desta máquina." #: printer/printerdrake.pm:4522 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" "Se quiser usar este modulo indique o nome do endereço ou IP do seu servidor " "CUPS e clique em OK, senão clique em \"Sair\"." #: printer/printerdrake.pm:4536 #, c-format msgid "Name or IP of remote server:" msgstr "Nome ou IP do servidor remoto:" #: printer/printerdrake.pm:4556 #, c-format msgid "Setting Default Printer..." msgstr "A definir a impressora padrão..." #: printer/printerdrake.pm:4576 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Sistema de impressão local CUPS ou servidor remoto CUPS?" #: printer/printerdrake.pm:4577 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "O sistema de impressão CUPS pode ser usado de duas maneiras:" #: printer/printerdrake.pm:4579 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "1. O sistema de impressão CUPS pode ser executado localmente. " #: printer/printerdrake.pm:4580 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" "Então as impressoras conectadas localmente podem ser usadas e as impressoras " "remotas noutros servidores CUPS na mesma rede são automáticamente " "descobertas. " #: printer/printerdrake.pm:4581 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" "A desvantagem desta abordagem +e, que mais recursos na máquina local são " "precisos: É necessário que seja instalado pacotes adicionais de software, o " "servidor CUPS tem que ser executado em 2º plano e é necessária mais memória, " "e a porta IPP (porta 631) é aberta. " #: printer/printerdrake.pm:4583 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" "2. Todos os pedidos de impressão são imediatamente enviados para um servidor " "CUPS remoto. " #: printer/printerdrake.pm:4584 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" "Aqui a ocupação dos recursos locais é reduzida ao m+inimo, Nenhum servidor " "CUPS é iniciado ou porta aberta, nenhuma infraestrutura de software para " "definir as filas de impressão local é necessária, então menos memória e " "espaço em disco é usado. " #: printer/printerdrake.pm:4585 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" "A desvantagem é que não é possível definir impressoras locais, então e se o " "servidor especificado estiver em baixo não pode ser nada imprimido a partir " "desta máquina." #: printer/printerdrake.pm:4587 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "Como deve o CUPS ser definido na sua máquina?" #: printer/printerdrake.pm:4591 printer/printerdrake.pm:4606 #: printer/printerdrake.pm:4610 printer/printerdrake.pm:4616 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "Servidor remoto, especifique aqui o Nome ou o IP:" #: printer/printerdrake.pm:4605 #, c-format msgid "Local CUPS printing system" msgstr "Sistema de impressão local CUPS" #: printer/printerdrake.pm:4644 #, c-format msgid "Select Printer Spooler" msgstr "Seleccionar Fila da Impressora" #: printer/printerdrake.pm:4645 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Que sistema de impressão (spooler) deseja usar?" #: printer/printerdrake.pm:4694 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Falha ao configurar a impressora \"%s\"!" #: printer/printerdrake.pm:4709 #, c-format msgid "Installing Foomatic..." msgstr "A instalar Foomatic..." #: printer/printerdrake.pm:4715 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "Não foi possível instalar %s pacotes, %s não pode ser iniciado!" #: printer/printerdrake.pm:4910 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "As seguintes impressoras encontram-se configuradas. Faça duplo clique numa " "impressora para alterar a sua configuração; para a definir como impressora " "padrão; ou para ver informações sobre esta." #: printer/printerdrake.pm:4940 #, c-format msgid "Display all available remote CUPS printers" msgstr "Mostrar todas as impressoras CUPS remotas disponíveis" #: printer/printerdrake.pm:4941 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Refrescar a lista das impressoras (para mostrar todas as impressoras CUPS " "remotas disponíveis)" #: printer/printerdrake.pm:4952 #, c-format msgid "CUPS configuration" msgstr "Configuração CUPS" #: printer/printerdrake.pm:4973 #, c-format msgid "Change the printing system" msgstr "Mudar de sistema de impressão" #: printer/printerdrake.pm:4982 #, c-format msgid "Normal Mode" msgstr "Modo Normal" #: printer/printerdrake.pm:4983 #, c-format msgid "Expert Mode" msgstr "Modo de Perito" #: printer/printerdrake.pm:5261 printer/printerdrake.pm:5317 #: printer/printerdrake.pm:5403 printer/printerdrake.pm:5412 #, c-format msgid "Printer options" msgstr "Opções da impressora" #: printer/printerdrake.pm:5297 #, c-format msgid "Modify printer configuration" msgstr "Mudar a configuração da impressora" #: printer/printerdrake.pm:5299 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Impressora %s%s\n" "O que deseja modificar nesta impressora?" #: printer/printerdrake.pm:5304 #, c-format msgid "This printer is disabled" msgstr "Esta impressora está desactivada" #: printer/printerdrake.pm:5306 #, c-format msgid "Do it!" msgstr "Fazer!" #: printer/printerdrake.pm:5312 printer/printerdrake.pm:5377 #, c-format msgid "Printer name, description, location" msgstr "Nome da Impressora, descrição, localização" #: printer/printerdrake.pm:5314 printer/printerdrake.pm:5396 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Fabricante da impressora, modelo, controlador" #: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397 #, c-format msgid "Printer manufacturer, model" msgstr "Fabricante da impressora, modelo" #: printer/printerdrake.pm:5319 printer/printerdrake.pm:5407 #, c-format msgid "Set this printer as the default" msgstr "Definir esta impressora como predefinida" #: printer/printerdrake.pm:5324 printer/printerdrake.pm:5413 #: printer/printerdrake.pm:5415 printer/printerdrake.pm:5424 #, c-format msgid "Enable Printer" msgstr "Activar Impressora" #: printer/printerdrake.pm:5327 printer/printerdrake.pm:5418 #: printer/printerdrake.pm:5419 printer/printerdrake.pm:5421 #, c-format msgid "Disable Printer" msgstr "Desactivar Impressora" #: printer/printerdrake.pm:5331 printer/printerdrake.pm:5425 #, c-format msgid "Printer communication error handling" msgstr "Gestão de erros de comunicação de impressoras" #: printer/printerdrake.pm:5332 printer/printerdrake.pm:5429 #, c-format msgid "Print test pages" msgstr "Imprimir páginas teste" #: printer/printerdrake.pm:5333 printer/printerdrake.pm:5431 #, c-format msgid "Learn how to use this printer" msgstr "Aprenda como usar esta impressora" #: printer/printerdrake.pm:5334 printer/printerdrake.pm:5433 #, c-format msgid "Remove printer" msgstr "Remover impressora" #: printer/printerdrake.pm:5385 #, c-format msgid "Removing old printer \"%s\"..." msgstr "A remover a impressora antiga \"%s\"..." #: printer/printerdrake.pm:5416 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "A impressora \"%s\" está agora activada." #: printer/printerdrake.pm:5422 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "A impressora \"%s\" está agora desactivada." #: printer/printerdrake.pm:5464 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Deseja realmente remover a impressora \"%s\"?" #: printer/printerdrake.pm:5468 #, c-format msgid "Removing printer \"%s\"..." msgstr "A remover a impressora \"%s\"..." #: printer/printerdrake.pm:5492 #, c-format msgid "Default printer" msgstr "Impressora predefinida" #: printer/printerdrake.pm:5493 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "A impressora \"%s\" está agora como a impressora predefinida." #: raid.pm:41 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Não foi possível adicionar uma partição ao RAID _formatado_ %s" #: raid.pm:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Sem partições suficientes para o nível RAID %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "Não foi possível criar o directório /usr/share/sane/firmware!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "Não foi possível criar a ligação /usr/share/sane/%s!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" "Não foi possível copiar o ficheiro firmware %s para /usr/share/sane/firmware!" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "Não é possível definir as permissões do ficheiro firmware %s!" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" "Não foi possível instalar os pacotes precisos para partilhar o seu scanner." #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" "O(s) seu(s) scanner(s) não irão estar disponíveis para utilizadores não-root." #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "Aceitar/Recusar mensagens de erro IPv4 adulteradas" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr " Aceitar/Recusar transmissão de icmp echo." #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "Aceitar/Recusar icmp echo." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Permitir/Proíbir auto-autenticação." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Se definido para \"TODOS\" e /etc/issue e /etc/issue.net podem existir.\n" "\n" "Se definido para NENHUM, nenhuma edição é permitida\n" "\n" "Senão só /etc/issue é permitido." #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Permitir/Proíbir reiniciar pelo utilizador da consola." #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "Permitir/Proíbir autenticação root remota." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Permitir/Proíbir autenticação root directa." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Permitir/Proíbir a lista dos utilizadores do sistema nos gestores de ecrã " "(kdm e gdm)." #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" "Permitir/Proibir exportar o ecrã quando\n" "passar da conta root para outros utilizadores.\n" "\n" "Ver pam_xauth(8) para mais detalhes.'" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Permitir/Proíbir ligações X:\n" "\n" "- TODOS (todas as ligações são permitidas),\n" "\n" "- LOCAL (só as ligações a partir da máquina local),\n" "\n" "- NENHUM (nenhuma ligação)." #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "O argumento especifica se os clientes são autorizados a conectar\n" "ao servidor X a partir da rede na porta tcp 6000, ou não." #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Autoriza:\n" "\n" "- todos os serviços controlados por tcp_wrappers (veja a página do manual " "hosts.deny(5)) se definido para \"TODOS\",\n" "\n" "- só os locais se definido para \"LOCAL\"\n" "\n" "- nenhum se definido para \"NENHUM\".\n" "\n" "Para autorizar os serviços que precisa, use /etc/hosts.allow (veja hosts." "allow(5))." #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Se SERVER_LEVEL (ou SECURE_LEVEL ausente)\n" "é superior a 3 em /etc/security/msec/security.conf, cria a\n" "ligação simbólica /etc/security/msec/server para\n" "/etc/security/msec/server..\n" "\n" "O /etc/security/msec/server é usado por chkconfig --add para decidir\n" "adicionar um serviço se este está presente no ficheiro durante\n" "a instalação dos pacotes." #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Activar/Desactivar crontab e at para os utilizadores.\n" "\n" "Meta os utilizadores autorizados em /etc/cron.allow e /etc/at.allow\n" "(veja man em (1) e crontab(1))." #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Activar/Desactivar registos Syslog para a consola 12" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" "Activar/Desactivar protecção da resolução dos nomes.\n" "Se \"%s\" é verdadeiro, também regista no syslog." #: security/help.pm:80 standalone/draksec:215 #, c-format msgid "Security Alerts:" msgstr "Alertas de Segurança:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Activar/Desactivar protecção IP 'spoofing'" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "ActivarDesactivar libsafe se libsafe for encontrado no sistema." #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "Activar/Desactivar o registo dos pacotes IPv4 extranhos." #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Activar/Desactivar verificação msec horária." #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" "Activar su apenas para membros do grupo wheel ou permitir su a partir de " "qualquerutilizador." #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "Usar senha para autenticar utilizadores" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "Activar/Desactivar teste de promiscuidade das placas ethernet." #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "Activar/Desactivar verificação diária de segurança." #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "Activar/Desactivar sulogin(8) em nível único de utilizador." #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" "Adiciona o nome como uma excepção na gestão da idade da senha por msec." #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Define a expiração da senha para \"max\" dias e retarda a mudança para " "\"inactive\"." #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Define o tamanho do histórico da senha para evitar a reutilização das senhas." #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Define o comprimento mínimo da senha assim como o número mínimo de dígitos e " "de letras Maiúsculas." #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "Defina a umask do root." #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "se definido para sim, verifica as portas abertas." #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "se definido para sim, procura:\n" "\n" "- senhas vazias, \n" "\n" "- sem senha em /etc/shadow\n" "\n" "- para utilizadores com id 0 outros que não root." #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "se definido para sim, verifica as permissões dos ficheiros da pasta home do " "utilizador." #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "se definido para sim, verifica se os dispositivos de rede estão em modo " "promíscuo." #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" "se definido para sim, executa diáriamente as verificações de segurança." #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "se definido para sim, verifica as adições/remoções dos ficheiros sgid." #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "se definido para sim, verifica a ausência de senha em /etc/shadow." #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "se definido para sim, verifica o checksum dos ficheiros suid/sgid." #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "se definido para sim, verifica as adições/remoções dos ficheiros suid root." #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "se definido para sim, relporta ficheiros sem proprietário." #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "se definido para sim, verifica os ficheiros/directórios graváveis para todos." #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "se definido para sim, executa os testes chkrootkit." #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "se definido, envia o relatório para este endereço de correio, caso contrário " "envia para root." #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" "se definido para sim, reporta por e-mail os resultados das verificações." #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "Não envie e-mails se não existir nada a avisar" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "se definido para sim, executa alguns testes à base de dados rpm." #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" "se definido para sim, reporta para syslog os resultados das verificações." #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "se definido para sim, reporta para tty os resultados das verificações." #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Define o tamanho do histórico da Linha de Comandos (shell). Um valor de -1 " "significa ilimitado." #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" "Define o tempo de espera da Linha de Comandos (shell). Um valor de zero " "significa sem tempo de espera.." #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "A unidade do intervalo de tempo é o segundo" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "Defina a umask do utilizador" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "Aceitar mensagens de erro IPv4 adulteradas" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Aceitar echo icmp transmitidos" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "Aceitar icmp echo" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "existe /etc/issue*" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "Reinicio pelo utilizador da consola" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Permitir autenticação remota root" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "Autenticação directa root" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "Listar utilizadores nos gestores de ecrã (kdm e gdm)" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "Exportar o ecrâ ao passar de root para os outros utilizadores" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "Permitir conexões à janela X" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Autorizar conexões TCP à janela X" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Autorizar todos os serviços controlados por tcp_wrappers" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig obedece às regras msec" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "Activar \"crontab\" e \"at\" para utilizadores" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "Syslog reporta para a consola 12" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "Protecção 'spoofing' da resolução de nomes" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "Activar protecção IP spoofing" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Activar libsafe se libsafe for encontrado no sistema" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "Activar o registo de pacotes IPv4 extranhos" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "Activar verificação horaria da segurança msec" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "Activar su só para membros do grupo wheel ou para qualquer utilizador" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Usar senha para autentificar utilizadores" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Teste de promiscuidade das placas ethernet" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "Verificação diária da segurança" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) no nível utilizador único" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "Sem expiração de senha para" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Definir expiração da senha e atraso de inactivação da conta" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Comprimento do histórico da senha" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Comprimento mínimo de senha e número de digitos e letras maiúsculas" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Umask Root" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Tamanho do histórico da linha de comandos" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Intervalo de tempo da Linha de Comandos" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "Umask do utilizador" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Verifica as portas abertas" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "Verifica por contas inseguras" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "Verifica permissões dos ficheiros na pasta home do utilizador" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Verifica se os dispositivos de rede estão em modo promíscuo" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Executa diáriamente as verificações de segurança" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "Verificar as adições/remoções dos ficheiros sgid" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Verificar a senha vazia em /etc/shadow." #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Verificar o checksum dos ficheiros suid/sgid" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "Verificar as adições/remoções dos ficheiros suid root" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "Comunicar ficheiros sem dono" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "Verificar os ficheiros/directórios graváveis para todos" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "Executar as verificações chkrootkit" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "Não enviar e-mails quando não é necessário" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Se definido, envia o relatório para este endereço de correio senão envia-o " "para o root" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "Comunicar os resultados das verificações por correio" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "Executar algumas verificações na base de dados rpm" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Comunicar o resultado das verificações para syslog" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "Comunicar o resultado das verificações para tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Bem-vindo ao Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Pobre" #: security/level.pm:13 #, c-format msgid "High" msgstr "Elevado" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Superior" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Paranoico" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Este nível é para ser usado com cuidado. Torna seu sistema mais fácil \n" "de usar, mas muito sensível Não deve ser usado para uma máquina \n" "conectada a outras ou à Internet. Não existe acesso por senha." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "As senhas agora estão activas, mas o uso como computador de rede ainda não é " "recomendado." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Esta é a segurança padrão recomendada para um computador que será usado para " "se conectar à Internet como cliente." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Já há algumas restrições, e mais controlos automáticos são executados todas " "as noites." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Com este nível de segurança, o uso deste sistema como servidor tornou-se " "possível. A segurança é agora suficientemente alta para usar o sistema como " "um servidor\n" "que pode aceitar conexões de muitos clientes. Nota: se a sua máquina é " "apenas um cliente na Internet, deve escolher um nível mais baixo." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Este é similar ao nível anterior, mas o sistema está completamente fechado e " "as características de segurança estão no máximo." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "Draksec Opções Básicas" #: security/level.pm:57 #, c-format msgid "Please choose the desired security level" msgstr "Por favor, escolha o nível de segurança desejado" #: security/level.pm:61 #, c-format msgid "Security level" msgstr "Nível de segurança" #: security/level.pm:63 #, c-format msgid "Use libsafe for servers" msgstr "Use libsafe para servidores" #: security/level.pm:64 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Uma livraria que protege contra ataques tipo 'buffer overflow' e 'format " "string'" #: security/level.pm:65 #, c-format msgid "Security Administrator (login or email)" msgstr "Administrador de Segurança (autenticação ou email)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Inicie o sistema de som ALSA (Arquitectura de Som Linux Avançada) " #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron é um programador de comandos periódicos." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "O apmd é usado para monitorizar o estado da bateria e registá-lo via " "syslog.\n" "Também pode ser usado para desligar a máquina quando a bateria está fraca." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Executa comandos programados pelo comando at na hora especificada quando\n" "o at foi executado, e executa comandos batch quando a média de carregamento\n" "da memória estiver suficientemente baixo." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron é um programa UNIX padrão que executa programas especificados pelo\n" "utilizador em horas marcadas. vixie cron adiciona várias características ao\n" "UNIX cron básico, incluindo melhor segurança e melhores opções de " "configuração." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "O FAM é um servidor de monitorização de ficheiros. É usado para obter\n" "relatórios quando os ficheiros são alterados.\n" "É usado pelo GNOME e pelo KDE" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "O GPM adiciona suporte do rato a aplicações Linux em modo de texto tais\n" "como o Midnight Commander. Permite também operações de cortar-e-colar\n" "com o rato e inclui suporte para menus pop-up na consola." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "O harddrake executa uma verificação ao hardware, e opcionalmente\n" "configura hardware novo/alterado." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "O apache é um servidor Web mundial. É usado para servir ficheiros HTML e CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "O servidor Internet superserver (normalmente chamado inetd) inicia\n" "uma variedade de outros serviços Internet conforme necessário. É\n" "responsável pela inicialização de vários serviços, incluindo telnet, ftp,\n" "rsh e rlogin. Desactivando o inetd, desactiva todos os serviços pelos\n" "quais é responsável." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Execute o filtro de pacotes para o Linux kernel 2.2, para definir\n" "uma firewall para proteger a sua máquina de ataques da rede." #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Este pacote carrega o mapa de teclado seleccionado como definido\n" "em /etc/sysconfig/keyboard. Isto pode ser seleccionado usando o\n" "utilitário kbdconfig. Deve deixar isto activado para a maioria da máquinas." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Regeneração automática do cabeçalho do kernel em /boot\n" "para /usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Detecção e configuração automática de hardware no arranque." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "O Linuxconf irá por vezes executar várias tarefas no\n" "arranque para manter a configuração do sistema." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd é o servidor de impressão requerido para que o lpr funcione\n" "correctamente.\n" "É basicamente um servidor que controla os trabalhos\n" "de impressão para a(s) impressora(s)." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "O Linux Virtual Server, é usado para criar um servidor de alta performance\n" "e de grande disponibilidade." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "O conhecido (BIND) é um Domain Name Server (DNS) que é usado para resolver " "nomes de endereços para endereços IP." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Monta e desmonta todos os pontos de montagem Network File\n" "System (NFS), SMB (Gestor Lan/Windows), e NCP (NetWare)." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Activa/Desactiva todos os interfaces de rede configurados para iniciar\n" "no arranque." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "O NFS é um protocolo popular para partilha de ficheiros através de\n" "redes TCP/IP. Este serviço oferece a funcionalidade do servidor NFS,\n" "que é configurado através do ficheiro /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "O NFS é um protocolo popular para partilha de ficheiros através de redes\n" "TCP/IP. Este serviço oferece a funcionalidade de bloquear ficheiros NFS." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "Automaticamente alterna o estado da tecla numlock na consola\n" "e o Xorg no arranque." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Suporta o OKI 4w e winprinters compatíveis." #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "O suporte PCMCIA é normalmente usado para suportar coisas como\n" "ethernet ou modems nos portáteis. Não será iniciado a não ser que seja\n" "configurado de modo que seja seguro tê-lo instalado em máquinas que\n" "não precisem dele." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "O portmapper gere conexões RPC, que são usadas por protocolos tais como\n" "NFS ou NIS. O servidor portmap tem que estar a correr nas máquinas que\n" "actuam como servidores para protocolos que façam uso do mecanismo RPC." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "O postfix é um Agente de Transporte de Correio Electrónico, que é o programa " "que move o correio de uma máquina para outra." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Grava e restaura o 'entropy pool' do sistema para melhor qualidade\n" "na geração de números aleatórios." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Atribui dispositivos 'raw' para bloquear dispositivos (tais como as " "partições\n" "do disco rígido), para o uso de aplicações como o Oracle ou leitores DVD" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "O servidor encaminhado (routed) permite a actualização automática da\n" "tabela IP Router através do protocolo RIP. Enquanto o RIP é largamente\n" "usado em pequenas redes, os protocolos routing mais complexos são\n" "necessários para redes mais complexas." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "O protocolo rstat permite que os utilizadores de uma rede recebam\n" "informações sobre velocidade para qualquer máquina nessa rede." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "O protocolo rusers permite que os utilizadores de uma rede identifiquem\n" "quem está registado (ligado) noutras máquinas que respondam." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "O protocolo rwho permite que utilizadores remotos obtenham uma\n" "lista de todos os utilizadores conectados numa máquina a correr o\n" "servidor rwho (similar ao finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Iniciar o sistema de som na sua máquina" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog é a capacidade que muitos servidores usam para registar mensagens\n" "para vários ficheiros de registo do sistema. É boa ideia correr sempre o " "syslog." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Carrega os controladores para os seus dispositivos usb." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "Inicia o Servidor X Font (essencial para o Xorg funcionar)" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" "Escolha que serviços devem ser inicializados automaticamente na altura do " "arranque" #: services.pm:127 standalone/draksambashare:111 #, c-format msgid "Printing" msgstr "Impressão" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Partilhar ficheiros" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Administração remota" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Servidor de Bases de Dados" #: services.pm:209 #, c-format msgid "running" msgstr "a correr" #: services.pm:209 #, c-format msgid "stopped" msgstr "parado" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Serviços e servidores" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Não há informação adicional\n" "sobre este serviço, lamento." #: services.pm:224 ugtk2.pm:1009 #, c-format msgid "Info" msgstr "Info" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "Inicia quando pedido" #: services.pm:227 #, c-format msgid "On boot" msgstr "Ao arrancar" #: services.pm:244 #, c-format msgid "Start" msgstr "Iniciar" #: services.pm:244 #, c-format msgid "Stop" msgstr "Parar" #: share/advertising/01.pl:3 #, c-format msgid "Mandriva Linux 2006: Packs" msgstr "Mandriva Linux 2006: Pacotes" #: share/advertising/02.pl:3 #, c-format msgid "Mandriva Linux 2006: More features" msgstr "Mandriva Linux 2006: Mais opções" #: share/advertising/03.pl:3 #, c-format msgid "Interactive firewall" msgstr "Firewall interactiva" #: share/advertising/04.pl:3 #, c-format msgid "Desktop search" msgstr "Porcura no ecrã" #: share/advertising/05.pl:3 #, c-format msgid "New package manager" msgstr "Nova gestão de pacotes" #: share/advertising/06.pl:3 #, c-format msgid "Mandriva Linux 2006: More performances" msgstr "Mandriva Linux 2006: Mais caracteristicas" #: share/advertising/07.pl:3 #, c-format msgid "Latest kernel and GCC" msgstr "Último kernel e GCC" #: share/advertising/08.pl:3 #, c-format msgid "High Availibility" msgstr "Alta Disponibilidade" #: share/advertising/09.pl:3 #, c-format msgid "Delta RPM" msgstr "RPM Delta" #: share/advertising/10.pl:3 #, c-format msgid "Low resources setup" msgstr "Configuração de recursos fracos" #: share/advertising/11.pl:3 #, c-format msgid "Boot time reduction" msgstr "Redução do tempo de arranque" #: share/advertising/12.pl:3 #, c-format msgid "Mandriva Linux 2006: Easier to use" msgstr "Mandriva Linux 2006: Fácil de usar" #: share/advertising/13.pl:3 #, c-format msgid "Latest graphical interfaces: KDE and GNOME" msgstr "Últimos interfaces gráficos: KDE e GNOME" #: share/advertising/14.pl:3 #, c-format msgid "auto-installation servers" msgstr "auto-instalação de servidores" #: share/advertising/15.pl:3 #, c-format msgid "Easy and quick installation" msgstr "Instalação fácil e rápida" #: share/advertising/16.pl:3 #, c-format msgid "Easy configuration thanks to 60 wizards" msgstr "Agradecimentos de fácil configuração a 60 assistentes" #: share/advertising/17.pl:3 #, c-format msgid "Look and feel improved" msgstr "Aparência e modo melhorados" #: share/advertising/18.pl:3 #, c-format msgid "New webmin theme" msgstr "Novo tema webmin" #: share/advertising/19.pl:3 #, c-format msgid "Mandriva Linux 2006: More support" msgstr "Mandriva Linux 2006: Mais suporte" #: share/advertising/20.pl:3 #, c-format msgid "Better Hardware support" msgstr "Melhor suporte de hardware" #: share/advertising/21.pl:3 #, c-format msgid "Xen support" msgstr "Suporte xen" #: share/advertising/22.pl:3 #, c-format msgid "Mandriva Linux 2006: More information" msgstr "Mandriva Linux 2006: Mais informação" #: share/advertising/23.pl:3 #, c-format msgid "Mandriva Linux 2006: Where to buy?" msgstr "Mandriva Linux 2006: Onde comprar?" #: share/advertising/24.pl:3 #, c-format msgid "Where to find technical assistance?" msgstr "Onde encontrar assistência técnica?" #: share/advertising/25.pl:3 #, c-format msgid "How to join the Mandriva Linux community?" msgstr "Como entrar na comunidade Mandriva Linux?" #: share/advertising/26.pl:3 #, c-format msgid "How to keep your system up-to-date?" msgstr "Como manter o seu sistema actualizado?" #: share/advertising/intel.pl:3 #, c-format msgid "Intel Software" msgstr "Software Intel" #: share/advertising/skype.pl:3 #, c-format msgid "Skype lets you make calls through the Internet for free." msgstr "Skype permite-lhe de telefonar por Internet gratuitamente." #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "Estação de Trabalho Office" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Programas Office: processadores de texto (OpenOffice.org Writer, Kword), " "folhas de cálculo (OpenOffice.org Calc, Kspread), visualizadores PDF, etc" #: share/compssUsers.pl:29 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Programas office: processadores de texto (kword, abiword), folhas de cálculo " "(kspread, gnumeric), visualizadores pdf, etc" #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "Estação de Jogo" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Programas de divertimento: arcada, tabuleiros, estratégia, etc" #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "Estação Multimédia" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "Aplicações de som e vídeo reprodução/edição" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "Estação de Internet" #: share/compssUsers.pl:45 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Conjunto de ferramentas para ler e enviar correio electrónico e news (pine, " "mutt, tin...) e para navegar na Web" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "Computador de Rede (cliente)" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "Clientes para diferentes protocolos incluindo ssh" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "Configuração" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Ferramentas para facilitar a configuração do seu computador" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "Ferramentas de Consola" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "" "Editores, Linha de Comandos (shell), ferramentas de ficheiros, terminais" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "C e C++ bibliotecas de programação, programas e ficheiros 'include'" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "Documentação" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Livros e Howto's sobre o Linux e Software Livre" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "Base Padrão do Linux (LSB). Suporte de aplicações terceiras." #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:89 #, c-format msgid "Groupware" msgstr "Groupware" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "Servidor Kolab" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "Firewall/Router" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "Internet gateway" #: share/compssUsers.pl:97 #, c-format msgid "Mail/News" msgstr "Correio/Noticias" #: share/compssUsers.pl:98 #, c-format msgid "Postfix mail server, Inn news server" msgstr "Servidor de correio electrónico Postfix , servidor de noticias In" #: share/compssUsers.pl:101 #, c-format msgid "Directory Server" msgstr "Servidor de Directório" #: share/compssUsers.pl:105 #, c-format msgid "FTP Server" msgstr "Servidor FTP" #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "ProFTPd" #: share/compssUsers.pl:109 #, c-format msgid "DNS/NIS" msgstr "DNS/NIS" #: share/compssUsers.pl:110 #, c-format msgid "Domain Name and Network Information Server" msgstr "Nome do Domínio e Servidor de Informação da Rede" #: share/compssUsers.pl:113 #, c-format msgid "File and Printer Sharing Server" msgstr "Servidor de Partilhas de Ficheiros e Impressão" #: share/compssUsers.pl:114 #, c-format msgid "NFS Server, Samba server" msgstr "Servidor NFS, Servidor Samba" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "Base de Dados" #: share/compssUsers.pl:118 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "Servidor de Base de Dados PostgreSQL e MySQL" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "Web/FTP" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "Correio Electrónico" #: share/compssUsers.pl:127 #, c-format msgid "Postfix mail server" msgstr "Servidor de correio electrónico Postfix" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "Servidor de Base de Dados PostgreSQL ou MySQL" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "Computador/Servidor de Rede" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor SSH" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "Estação de Trabalho KDE" #: share/compssUsers.pl:148 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "O Ecrâ de Trabalho K (KDE), o ambiente gráfico básico com uma colecção de " "ferramentas" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "Estação de Trabalho Gnome" #: share/compssUsers.pl:153 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Um ambiente gráfico com um conjunto de aplicações amigáveis e ferramentas de " "ecrâ" #: share/compssUsers.pl:156 #, c-format msgid "IceWm Desktop" msgstr "Ecrâ IceWm" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "Outros Ambientes Gráficos" #: share/compssUsers.pl:161 #, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "Window Maker, Enlightenment, Fvwm, etc" #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "Utilidades" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384 #, c-format msgid "SSH Server" msgstr "Servidor SSH" #: share/compssUsers.pl:191 #, c-format msgid "Webmin" msgstr "Webmin" #: share/compssUsers.pl:192 #, c-format msgid "Webmin Remote Configuration Server" msgstr "Servidor de Configuração Remota Webmin" #: share/compssUsers.pl:196 #, c-format msgid "Network Utilities/Monitoring" msgstr "Utilidades da Rede/Monitarização" #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" "Ferramentas de monitorização, contagem de processos, tcpdump, nmap, ..." #: share/compssUsers.pl:201 #, c-format msgid "Mandriva Wizards" msgstr "Assistentes Mandriva" #: share/compssUsers.pl:202 #, c-format msgid "Wizards to configure server" msgstr "Assistentes para configurar o servidor" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Este programa é de software livre; pode redistribuir-lo e/ou modifica-lo\n" "nos termos da licença GNU GPL como publicado pela Fundação de\n" "Software Livre, seja na versão 2, ou (à sua escolha) em qualquer\n" "versão anterior.\n" "\n" "Este programa é distribuído na esperança de que seja útil, mas SEM\n" "QUALQUER GARANTIA; mesmo sem a garantia implícita de VENDA ou de\n" "ADEQUAÇÃO A QUALQUER PORPÓSITO. Veja a licença GNU Licença Publica\n" "Geral para mais detalhes.\n" "\n" "Devia ter recebido uma cópia da licença GNU GPL com este\n" "programa; senão escreva para Fundação Free Software, Inc.,\n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Aplicação para Backup e Restauro\n" "\n" "--default : grava os directórios predefinidos.\n" "--debug : mostra todas as mensagens erro.\n" "--show-conf : lista de ficheiros ou directórios para bachup.\n" "--config-info : explica as opções dos ficheiros de configuração " "(para utilizadores sem X).\n" "--daemon : usa a configuração do servidor.\n" "--help : mostra esta mensagem.\n" "--version : mostra o numero da versão.\n" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" "[--boot] [--splash]\n" "OPÇÕES:\n" " --boot - permite configurar o carregador de arranque\n" " --splash - permite configurar o modo predefinido do tema\n" " de arranque: oferece para configurar a opção auto-autenticar" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" "[OPÇOES] [NOME_DO_PROGRAMA]\n" "\n" "OPÇOES:\n" " --help - mostra esta mensagem de ajuda.\n" " --report - o programa deve ser um das ferramentas Mandriva Linux\n" " --incident - o programa deve ser um das ferramentas Mandriva Linux" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" "[--add]\n" " --add - assistente \"adiciona um interface de rede\"\n" " --del - assistente \"apaga um interface de rede\"\n" " --skip-wizard - gere as conexões\n" " --internet - configura a internet\n" " --wizard - o mesmo que --add" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "\n" "Aplicação para importar e monitorizar tipos de letra\n" "\n" "OPÇÕES:\n" "--windows_import : importa a partir de todas as partições windows " "disponiveis.\n" "--xls_fonts : mostra todas os tipos de letra que já existem a partir do xls\n" "--install : aceita qualquer ficheiro de tipo de letra ou directoria.\n" "--uninstall : desinstala qualquer tipo de letra ou directoria.\n" "--replace : substitui todos os tipos de letra que já existam.\n" "--application : 0 nenhuma aplicação.\n" " : 1 todas as aplicações disponíveis suportadas.\n" " : nome_da_aplicação como so para staroffice \n" " : e gs para ghostscript apenas para esta." #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPÇÕES]...\n" "Configurador do Servidor de Terminais Mandriva Linux\n" "--enable : activa o MTS\n" "--disable : desactiva o MTS\n" "--start : inicia o MTS\n" "--stop : pára o MTS\n" "--adduser : adiciona um utilizador do sistema ao MTS (requer nome do " "utilizador)\n" "--deluser : apaga um utilizador do sistema do MTS (requer nome do " "utilizador)\n" "--addclient : adiciona uma máquina cliente ao MTS (requer endereços " "MAC, IP, e o nome de imagem nbi)\n" "--delclient : apaga uma máquina cliente do MTS (requer endereços MAC, " "IP, e o nome de imagem nbi)" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[teclado]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" "[--file=meuficheiro] [--word=minhapalavra] [--explain=regexp] [--alert]" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" "[OPÇÕES]\n" "Aplicação de conexão e monitorização de uma Rede & Internet\n" "\n" "--defaultintf interface : mostra este interface por omissão\n" "--connect : conecta à internet se ainda não estiver conectado\n" "--disconnect : desliga da internet se já estiver ligado\n" "--force : usado com (dis)connect : força a (des)conexão.\n" "--status : mostra 1 se está ligado, 0 caso contrário, e sai.\n" "--quiet : não é interactivo. Para ser usado com (dis)connect." #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPÇÃO]...\n" " --no-confirmation não pede a primeira confirmação em modo Mandriva " "Update\n" " --no-verify-rpm não verifica as assinaturas dos pacotes\n" " --changelog-first mostra o registo de mudanças antes da lista dos " "ficheiros na janela de descrições\n" " --merge-all-rpmnew propõe fundir todos os ficheiros .rpmnew/.rpmsave " "encontrados" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [tudo]\n" " XFdrake [--noauto] ecrã \n" " XFdrake resolução" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] " "[-v|--version] " #: standalone/XFdrake:59 #, c-format msgid "You need to reboot for changes to take effect" msgstr "Precisa reiniciar para que as alterações tenham efeito" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Por favor saía (log out) e depois utilize Ctrl-Alt-BackSpace" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "Precisa de sair e voltar para que as mudanças tenham efeito" #: standalone/drakTermServ:102 standalone/drakTermServ:108 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s requer um nome de utilizador...\n" #: standalone/drakTermServ:119 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s requer nome de endereço, endereço MAC, IP, nbi-image, 0/1 para " "THIN_CLIENT, 0/1 para a Configuração Local...\n" #: standalone/drakTermServ:125 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s requer nome de endereço...\n" #: standalone/drakTermServ:207 standalone/drakTermServ:210 #, c-format msgid "Terminal Server Configuration" msgstr "Configuração do Servidor de Terminal" #: standalone/drakTermServ:216 #, c-format msgid "dhcpd Config" msgstr "Configuração dhcpd" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "Activar Servidor" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "Desactivar Servidor" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "Iniciar Servidor" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "Parar Servidor" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Disquete/ISO Etherboot" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "Imagens de Arranque na Rede" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "Adicionar/Apagar Utilizadores" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "Adicionar/Apagar Clientes" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Imagens" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "Clientes/Utilizadores" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Assistente para Primeira Vez" #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" "o %s está definido como dm, adicionando utilizador gdm a /etc/passwd$$CLIENT$" "$" #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" "\n" " Esta rotina do assistente irá:\n" " \t1) Pedir-lhe que escolha clientes 'magros' ou 'gordos'.\n" "\t2) Configurar DHCP.\n" "\t\n" "Depois de executar estes passos, o assistente irá:\n" "\t\n" " a) Compilar todos os " "nbis. \n" " b) Activar o " "servidor. \n" " c) Iniciar o " "servidor. \n" " d) Sincronizar os ficheiros shadow para que todos os utilizadores, " "incluindo o root, \n" " sejam adicionados ao ficheiro shadow$$CLIENT$" "$. \n" " e) Pedir-lhe que faça uma disquete de arranque.\n" " f) Se forem clientes 'magros', pergunta-lhe se quer reiniciar o KDM.\n" #: standalone/drakTermServ:379 #, c-format msgid "Cancel Wizard" msgstr "Cancelar Assistente" #: standalone/drakTermServ:394 #, c-format msgid "Please save dhcpd config!" msgstr "Pff guarde a configuração do dhcpd!" #: standalone/drakTermServ:422 #, c-format msgid "Use thin clients." msgstr "Use Clientes 'Magros'" #: standalone/drakTermServ:424 #, c-format msgid "Sync client X keyboard settings with server." msgstr "Sincronizar as preferências do teclado do cliente X com o servidor." #: standalone/drakTermServ:426 #, c-format msgid "" "Please select default client type (Fat is the default type if 'Use thin' is " "unchecked).\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" "Por favor seleccione o tipo de cliente predefinido (Gordo é o tipo " "prédefinido se\n" "'Usar magro' estiver desmarcado).\n" " Clientes 'magros' correm tudo a partir do CPU/RAM do servidor, usando o " "display do cliente.\n" " Clientes 'gordos' usam o seu próprio CPU/RAM mas o sistema de ficheiros " "do servidor." #: standalone/drakTermServ:446 #, c-format msgid "Creating net boot images for all kernels" msgstr "A criar novas imagens de arranque para todos os kernels" #: standalone/drakTermServ:447 standalone/drakTermServ:769 #: standalone/drakTermServ:785 #, c-format msgid "This will take a few minutes." msgstr "Isto irá levar alguns minutos." #: standalone/drakTermServ:453 standalone/drakTermServ:493 #, c-format msgid "Done!" msgstr "Pronto!" #: standalone/drakTermServ:464 standalone/drakTermServ:849 #, c-format msgid "%s failed" msgstr "%s falhado" #: standalone/drakTermServ:473 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" "Sem espaço suficiente para criar\n" "NBIs em %s.\n" "Necessário: %d MB, Livre: %d MB" #: standalone/drakTermServ:479 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" "A sincronizar a lista de utilizadores do servidor com a do cliente, " "incluindo o root." #: standalone/drakTermServ:499 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" "Para activar as alterações feitas para os clientes magros, o gestor de " "ecrâtem que ser reiniciado. Reiniciar agora?" #: standalone/drakTermServ:534 #, c-format msgid "Terminal Server Overview" msgstr "Apresentação do Servidor de Terminal" #: standalone/drakTermServ:535 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - Criar Imagens de Arranque Etherboot:\n" " \tPara arrancar um kernel via etherboot, uma imagem kernel/initrd " "especial deve ser criada.\n" " \tmkinitrd-net faz a maior parte do trabalho e o drakTermServ é só o " "interface \n" " \tgráfico para ajudar a gerir/personalizar essas imagens. Para criar " "o ficheiro \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include que é metido como um " "include em \n" " \tdhcpd.conf, deve criar as imagens de arranque Etherboot para pelo " "menos \n" " \tum kernel completo." #: standalone/drakTermServ:541 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" " - Gestão de /etc/dhcpd.conf:\n" " \t\tPara os clientes que arrancam na rede, cada um precisa duma " "entrada em dhcpd.conf, \n" " \t\ta atribuir o endereço IP e a imagem de arranque rede da " "máquina.\n" " \t\tO drakTermServ ajuda a criar/apagar estas entradas.\n" "\t\t\t\n" " \t\t(as placas PCI podem omitir a imagem - o Etherboot irá pedir a " "imagem correcta.\n" " \t\tDeve também lembrar-se que quando o Etherboot procura imagens, " "espera\n" " \t\tpor nomes como boot-3c59x.nbi, em vez de boot-3c59x.2.4.19-16mdk." "nbi).\n" "\t\t\t \n" " \t\tUma entrada típica no dhcpd.conf para aceitar um cliente sem " "disco, parece-se com:" #: standalone/drakTermServ:559 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" "\t\t\tMesmo que possa usar uma zona de endereços IP, em vez de configurar " "uma entrada\n" "\t\t\tespecifica para uma maquina cliente, usando esquena de endereço fixo " "facilita usando\n" "\t\t\tfuncionalidade de configuração específica por cliente que o ClusterNFS " "fornece.\n" "\t\t\t\n" "\t\t\tNota: A entrada \"#type\" é apenas usada por drakTermServ. Os clientes " "podem ser 'thin'\n" "\t\t\tou 'fat'. Os clientes 'thin' correm a maioria do software no servidor " "por XDMCP, enquanto os\n" "\t\t\tclientes Fat correm a maior parte do software na maquina cliente. Um " "inittab especial,\n" "\t\t\t%s é\n" "\t\t\tcriado para os clientes 'thin'. Os ficheiros de configuração do " "sistema xdm-config, kdmrc, e gdm.conf\n" "\t\t\tsão modificados se são usados clientes magros, para activar o XDMCP. " "Como há problemas de\n" "\t\t\tsegurança no uso de XDMCP, hosts.deny e hosts.allow são modificados " "para limitar\n" "\t\t\to acesso à subrede local.\n" "\t\t\t\n" "\t\t\tNota: É preciso reiniciar o servidor depois de adicionar ou mudar os " "clientes." #: standalone/drakTermServ:579 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" " - Gestão de /etc/exports:\n" " \t\tClusternfs permite exportar o sistema de ficheiros root para " "clientes sem disco.\n" " \t\tO drakTermServ configura a entrada correcta para permitir um " "acesso anonimo ao \n" " \t\tsistema de ficheiros root dos clientes sem disco.\n" "\n" " \t\tUma entrada de exportação típica para ClusterNFS é:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tCom SUBNET/MASK definidos a partir da sua rede." #: standalone/drakTermServ:591 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - Gestão de %s:\n" " \t\tPara que os utilizadores se possam ligar ao sistema a partir dum " "cliente sem disco, a sua \n" " \t\tentrada em /etc/shadow precisa ser duplicada em %s. " "drakTermServ\n" " \t\tajuda nisto ao adicionar ou remover utilizadores do sistema a " "partir deste ficheiro." #: standalone/drakTermServ:595 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - Ficheiro %s por cliente:\n" " \t\tPelos ClusterNFS, cada cliente sem disco pode ter o seu único " "ficheiro de configuração do X \n" " \t\tno sistema de ficheiros root do servidor. Ao permitir a " "configuração do hardware do cliente local,\n" "drakTermServ irá ajudar a criar \n" " \t\to drakTermServ irá ajudar a cria estes ficheiros." #: standalone/drakTermServ:600 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - Ficheiros de configuração sistema por cliente:\n" " \tPelos clusternfs, cada cliente sem disco pode ter o seu único " "ficheiros de configuração \n" " \tno sistema de ficheiros root do servidor. Ao permitir a " "configuração do hardware,\n" " \tdo cliente local, os clientes podem personalizar ficheiros tais " "como /etc/modules.conf, /etc/sysconfig/mouse, \n" " \t/etc/sysconfig/mouse, /etc/sysconfig/keyboard numa base por " "cliente.\n" "\n" " Nota: Permitir a configuração local do hardware, activa a " "autenticação root no servidor de terminal\n" " em cada máquina cliente que tem esta opção activada. A configuração " "local pode ser,\n" " desactivada, retendo os ficheiros de configuração, assim que o " "cliente esteja configurado." #: standalone/drakTermServ:609 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\to drakTermServ irá configurar este ficheiro para trabalhar em " "conjunto com\n" " \t\tas imagens criadas por mkinitrd-net, e entradas em /etc/dhcpd." "conf, para servir\n" " \t\tacima da imagem de arranque para cada cliente sem disco.\n" "\n" " \t\tUm ficheiro típico de configuração TFTP:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tAs mudanças feitas aqui para com a instalação inicial são a " "activação do serviço \n" " \t\te o caminho para /var/lib/tftpboot, onde mkinitrd-net mete as " "imagens." #: standalone/drakTermServ:630 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" " - Criar CDs/disquetes etherboot:\n" " \tAs máquinas cliente sem disco precisam de imagens ROM no NIC, uma " "disquete\n" " \tde arranque, ou um CD para inicializar a sequência de arranque. O " "drakTermServ\n" " \tirá ajudar a gerar estas imagens, baseado no NIC da máquina " "cliente.\n" " \t\t\n" " \tUm exemplo de criação de disquete de arranque para um 3Com 3c509\n" "manualmente:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" #: standalone/drakTermServ:663 #, c-format msgid "Boot Floppy" msgstr "Disquete de Arranque" #: standalone/drakTermServ:665 #, c-format msgid "Boot ISO" msgstr "ISO de Arranque" #: standalone/drakTermServ:667 #, c-format msgid "PXE Image" msgstr "Imagem PXE" #: standalone/drakTermServ:728 #, c-format msgid "Default kernel version" msgstr "Versão predefinida do kernel" #: standalone/drakTermServ:731 #, c-format msgid "Create PXE images." msgstr "Criar imagens PXE." #: standalone/drakTermServ:757 #, c-format msgid "Install i586 kernel for older clients" msgstr "Instalar kernel i586 para clientes antigos" #: standalone/drakTermServ:767 #, c-format msgid "Build Whole Kernel -->" msgstr "Compilar todo o kernel -->" #: standalone/drakTermServ:774 #, c-format msgid "No kernel selected!" msgstr "Nenhum kernel seleccionado !" #: standalone/drakTermServ:777 #, c-format msgid "Build Single NIC -->" msgstr "Compilar um só NIC -->" #: standalone/drakTermServ:781 standalone/drakTermServ:1581 #, c-format msgid "No NIC selected!" msgstr "Nenhum NIC seleccionado!" #: standalone/drakTermServ:784 #, c-format msgid "Build All Kernels -->" msgstr "Compilar Todos os Kernels -->" #: standalone/drakTermServ:797 #, c-format msgid "<-- Delete" msgstr "<-- Apagar" #: standalone/drakTermServ:802 #, c-format msgid "No image selected!" msgstr "Nenhuma imagem seleccionada!" #: standalone/drakTermServ:805 #, c-format msgid "Delete All NBIs" msgstr "Apagar todos os NBIs" #: standalone/drakTermServ:880 #, c-format msgid "Building images for kernel:" msgstr "A compilar imagens para o kernel:" #: standalone/drakTermServ:1004 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Indica que a senha no sistema de base de dados é diferente do\n" "que a senha da base de dados do Servidor de Terminal.\n" "Apague/re-adicione o utilizador para o Servidor de Terminais\n" "para permitir a autenticação." #: standalone/drakTermServ:1009 #, c-format msgid "Add User -->" msgstr "Adicionar utilizador -->" #: standalone/drakTermServ:1015 #, c-format msgid "<-- Del User" msgstr "<-- Apagar Utilizador" #: standalone/drakTermServ:1051 #, c-format msgid "type: %s" msgstr "tipo: %s" #: standalone/drakTermServ:1055 #, c-format msgid "local config: %s" msgstr "configuração local: %s" #: standalone/drakTermServ:1086 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Permitir a configuração\n" "local do hardware." #: standalone/drakTermServ:1095 #, c-format msgid "No net boot images created!" msgstr "Nenhuma imagem de arranque na rede criada!" #: standalone/drakTermServ:1114 #, c-format msgid "Thin Client" msgstr "Cliente 'Thin'" #: standalone/drakTermServ:1118 #, c-format msgid "Allow Thin Clients" msgstr "Permitir Clientes 'Thin'" #: standalone/drakTermServ:1119 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" "Sincronizar as definições\n" " do teclado do cliente X com o servidor." #: standalone/drakTermServ:1120 #, c-format msgid "Add Client -->" msgstr "Adicionar Cliente -->" #: standalone/drakTermServ:1134 #, c-format msgid "type: fat" msgstr "tipo: fat" #: standalone/drakTermServ:1135 #, c-format msgid "type: thin" msgstr "tipo: 'thin'" #: standalone/drakTermServ:1142 #, c-format msgid "local config: false" msgstr "configuração local: falso" #: standalone/drakTermServ:1143 #, c-format msgid "local config: true" msgstr "configuração local: verdadeiro" #: standalone/drakTermServ:1151 #, c-format msgid "<-- Edit Client" msgstr "<-- Editar Cliente" #: standalone/drakTermServ:1176 #, c-format msgid "Disable Local Config" msgstr "Desactivar Configuração Local" #: standalone/drakTermServ:1183 #, c-format msgid "Delete Client" msgstr "Apagar Cliente" #: standalone/drakTermServ:1205 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "É preciso reiniciar o Gestor de Sessões para tomar em conta as mudanças. \n" "(service dm restart - na linha de comando)" #: standalone/drakTermServ:1250 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" "Os clientes 'thin' não irão funcionar com a auto-autenticação. Desactivar a " "auto-autenticação?" #: standalone/drakTermServ:1266 #, c-format msgid "All clients will use %s" msgstr "Todos os clientes irão usar %s" #: standalone/drakTermServ:1300 #, c-format msgid "Subnet:" msgstr "Subnet:" #: standalone/drakTermServ:1307 #, c-format msgid "Netmask:" msgstr "Netmask:" #: standalone/drakTermServ:1314 #, c-format msgid "Routers:" msgstr "Routers:" #: standalone/drakTermServ:1321 #, c-format msgid "Subnet Mask:" msgstr "Máscara de Subnet" #: standalone/drakTermServ:1328 #, c-format msgid "Broadcast Address:" msgstr "Endereço de Transmissão:" #: standalone/drakTermServ:1335 #, c-format msgid "Domain Name:" msgstr "Nome do domínio:" #: standalone/drakTermServ:1343 #, c-format msgid "Name Servers:" msgstr "Servidores de Nomes:" #: standalone/drakTermServ:1354 #, c-format msgid "IP Range Start:" msgstr "Inicio da extensão IP:" #: standalone/drakTermServ:1355 #, c-format msgid "IP Range End:" msgstr "Fim da extensão IP:" #: standalone/drakTermServ:1397 #, c-format msgid "Append TS Includes To Existing Config" msgstr "Anexar TS Includes à Configuração Existente" #: standalone/drakTermServ:1399 #, c-format msgid "Write Config" msgstr "Escrever Configuração" #: standalone/drakTermServ:1415 #, c-format msgid "dhcpd Server Configuration" msgstr "Configuração do Servidor dhcpd" #: standalone/drakTermServ:1416 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "A maior parte destes valores foram extraidos\n" "do seu sistema actual.\n" "Pode modifica-los conforme necessário." #: standalone/drakTermServ:1419 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" "Grupo de Endereços IP Dinâmicos\n" "(necessário para clientes PXE):" #: standalone/drakTermServ:1572 #, c-format msgid "Write to %s failed!" msgstr "Não é possível escrever em %s!" #: standalone/drakTermServ:1585 #, c-format msgid "Please insert floppy disk:" msgstr "Por favor insira uma disquete:" #: standalone/drakTermServ:1589 #, c-format msgid "Could not access the floppy!" msgstr "Não consegui aceder à disquete !" #: standalone/drakTermServ:1591 #, c-format msgid "Floppy can be removed now" msgstr "A disquete pode ser removida agora" #: standalone/drakTermServ:1594 #, c-format msgid "No floppy drive available!" msgstr "Nenhum controlador de disquete disponível!" #: standalone/drakTermServ:1600 #, c-format msgid "PXE image is %s/%s" msgstr "A imagem PXE é %s/%s" #: standalone/drakTermServ:1602 #, c-format msgid "Error writing %s/%s" msgstr "Erro ao escrever %s/%s" #: standalone/drakTermServ:1614 #, c-format msgid "Etherboot ISO image is %s" msgstr "A imagem ISO Etherboot é %s" #: standalone/drakTermServ:1618 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Algo correu mal! - Os mkisofs estão instalados?" #: standalone/drakTermServ:1638 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "É preciso criar primeiro /etc/dhcpd.conf" #: standalone/drakTermServ:1797 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "má passwd %s no Servidor de Terminal - reescrever...\n" #: standalone/drakTermServ:1810 #, c-format msgid "%s is not a user..\n" msgstr "%s não é um utilizador..\n" #: standalone/drakTermServ:1811 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s é já um utilizador do Servidor de Terminal\n" #: standalone/drakTermServ:1813 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "A adição de %s ao Servidor de Terminal falhou!\n" #: standalone/drakTermServ:1815 #, c-format msgid "%s added to Terminal Server\n" msgstr "%s foi adicionado ao Servidor de Terminal\n" #: standalone/drakTermServ:1832 #, c-format msgid "Deleted %s...\n" msgstr "%s apagado...\n" #: standalone/drakTermServ:1834 standalone/drakTermServ:1907 #, c-format msgid "%s not found...\n" msgstr "%s não encontrado...\n" #: standalone/drakTermServ:1935 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow e /etc/hosts.deny já estão configurados - não alterados" #: standalone/drakTermServ:2075 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "A configuração mudou - reiniciar clusternfs/dhcpd?" #: standalone/drakautoinst:38 standalone/drakhosts:123 #: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105 #: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539 #: standalone/draknfs:546 standalone/draksambashare:187 #: standalone/draksambashare:208 standalone/draksambashare:631 #: standalone/draksambashare:798 #, c-format msgid "Error!" msgstr "Erro!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "Não consigo encontrar o ficheiro imagem '%s'." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Auto Instalar Configurador" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "Está prestes a configurar uma disquete de Auto instalação. Esta " "caracteristica é de alguma maneira perigosa e deve ser usada " "circunspectamente.\n" "\n" "Com esta caracteristica, irá poder repetir a instalação que fez neste " "computador, sendo-lhe perguntado por alguns passos, para que possa mudar os " "seus valores.\n" "\n" "Para uma segurança máxima, o particionamento e a formatação nunca serão " "executadas automáticamente, seja qualfor a escolha durante a instalaçao " "neste computador.\n" "\n" "Prima ok para continuar." #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "repetir" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "manual" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Passos de Configuração Automáticos" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Por favor escolha para cada passo se irá repetir como na instalação, ou se " "será manual" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "A criar disquete de auto-instalação" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "" "Insira outra disquete vazia no dispositivo %s (para os controladores do " "disco)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "A criar disquete de auto-instalação (disco de controladores)" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Bemvindo.\n" "\n" "Os parametros da auto-instalação estão disponíveis nas secções à esquerda" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "A disquete foi criada com sucesso.\n" "Pode agora repetir a sua instalação." #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "Auto Instalar" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "Adicionar um item" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "Remover o ultimo item" #: standalone/drakbackup:156 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect é uma extensão par a linguagem de scripts TCL que permite sessões " "interactivas sem intervenção do utilizador." #: standalone/drakbackup:157 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Grava a senha para este sistema na configuração do drakbackup." #: standalone/drakbackup:158 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "Para um CD multisessão, apenas a primeira sessão irá apagar o cdrw. Em " "contrário o cdrw é apagado antes de cada backup." #: standalone/drakbackup:159 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Esta opção irá gravar ficheiros que foram alterados. O comportamento exacto " "depende se é usado o modo incremental ou diferencial." #: standalone/drakbackup:160 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Os backups por incrementação só gravam ficheiros que mudaram ou são novos " "desde o último backup." #: standalone/drakbackup:161 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Backups diferenciais apenas gravam ficheiros que tenham sido modificados ou " "são novos desde o original backup 'base'." #: standalone/drakbackup:162 #, c-format msgid "" "Star should be selected if you want to backup EA or ACLs, otherwise choose " "tar" msgstr "" "Star deveria ser escolhido se deseja arquivar EA ou ACLs, senão escolha tar" #: standalone/drakbackup:163 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server. Multiple " "users can be in a comma seperated list" msgstr "" "Isto devia ser um utilizador local ou um endereço de correio para onde quer " "que os resultados do backup sejam enviados. Irá precisar de definir um " "servidor de correio electrónico funcional. Vários utilizadores podem estar " "separados por virgulas." #: standalone/drakbackup:164 #, c-format msgid "" "This should be the return address that you want the backup results sent " "from. Default is drakbackup." msgstr "" "Isto deve ser o endereço de retorno de onde quer que os resultados de backup " "sejam enviados. Por omissão é drakbackup." #: standalone/drakbackup:165 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Ficheiros ou asteriscos listados num ficheiro .backupignore no topo de uma " "árvore de directórios não será salvo para bakup." #: standalone/drakbackup:166 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Para backups para outra media, os ficheiros serão na mesma criados no disco, " "e então serão movidos para essa outra media. Ao activar esta opção não irá " "remover os ficheiros tar do disco a seguir ao backup." #: standalone/drakbackup:167 #, c-format msgid "" "Selecting this option allows you to view the raw output from the restore " "process, after a file restore." msgstr "" "Escolhendo esta opção vai poder ver as mensagens completas do processo de " "restauração, depois de restaurar um ficheiro." #: standalone/drakbackup:168 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "Alguns protocolos, como rsync, podem ser configurados no fim do servidor. do " "lado do servidor. É preferivel a usar o path da directoria, deveria usar o " "'módulo' nome para o path do serviço." #: standalone/drakbackup:169 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "Personalizado permite-lhe especificar o seu prõprio dia e hora. As outras " "opções usam partes executáveis em /etc/crontab." #: standalone/drakbackup:343 #, c-format msgid "No media selected for cron operation." msgstr "Nenhuma media seleccionada para a operação cron" #: standalone/drakbackup:347 #, c-format msgid "No interval selected for cron operation." msgstr "Nenhum intervalo seleccionado para a operação cron" #: standalone/drakbackup:393 #, c-format msgid "Interval cron not available as non-root" msgstr "O Intervalo Cron não está disponível para utilizadores não-root" #: standalone/drakbackup:477 standalone/logdrake:440 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "\"%s\" não é um e-mail válido nem um utilizador local existente!" #: standalone/drakbackup:481 standalone/logdrake:445 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" "o \"%s\" é um utilizador local, mas não selecionou um smtp local, então deve " "usar um endereço de correio completo!" #: standalone/drakbackup:491 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" "A lista dos utilizadores válidos mudou, reescreva o ficheiro de configuração." #: standalone/drakbackup:493 #, c-format msgid "Old user list:\n" msgstr "Antiga lista de utilizadores :\n" #: standalone/drakbackup:495 #, c-format msgid "New user list:\n" msgstr "Nova lista de utilizadores :\n" #: standalone/drakbackup:524 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " Relatório do DrakBackup \n" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Relatório do Servidor DrakBackup\n" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " Detalhes do Relatório do DrakBackup\n" "\n" "\n" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, c-format msgid "Total progress" msgstr "Progressão total" #: standalone/drakbackup:609 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s existe, apagar?\n" "\n" "Se já alguma vez fez este processo irá provavelmente ter que limpar\n" "a entrada das chaves autorizadas no servidor." #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "Isto pode levar algum tempo a gerar as chaves." #: standalone/drakbackup:625 #, c-format msgid "Cannot spawn %s." msgstr "Não foi possível criar %s." #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "Nenhum pedido de senha em %s na porta %s" #: standalone/drakbackup:643 #, c-format msgid "Bad password on %s" msgstr "Senha errada em %s" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Permissão recusada ao transferir %s para %s" #: standalone/drakbackup:645 #, c-format msgid "Can not find %s on %s" msgstr "Não consigo encontrar %s em %s" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "%s não responde" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Transferência com sucesso\n" "Pode querer verificar se pode entrar/autenticar no servidor com :\n" "\n" "ssh -i %s %s@%s\n" "\n" "sem que lhe seja pedido uma senha." #: standalone/drakbackup:703 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Nenhum CDR/DVDR no dispositivo!" #: standalone/drakbackup:707 #, c-format msgid "Does not appear to be recordable media!" msgstr "Não parece ser uma media gravável!" #: standalone/drakbackup:712 #, c-format msgid "Not erasable media!" msgstr "Impossivel apagar media!" #: standalone/drakbackup:754 #, c-format msgid "This may take a moment to erase the media." msgstr "Isto pode levar algum tempo a apagar a media." #: standalone/drakbackup:812 #, c-format msgid "Permission problem accessing CD." msgstr "Problema de permissões ao aceder o CD." #: standalone/drakbackup:839 #, c-format msgid "No tape in %s!" msgstr "Nenhuma cassete em %s!" #: standalone/drakbackup:948 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" "Quota de destino do backup excedida!\n" "%d MB usado vs %d MB alocado." #: standalone/drakbackup:968 standalone/drakbackup:1000 #, c-format msgid "Backup system files..." msgstr "Cópia de segurança dos ficheiros do sistema..." #: standalone/drakbackup:1001 standalone/drakbackup:1040 #, c-format msgid "Hard Disk Backup files..." msgstr "Cópia de segurança dos ficheiros do disco rígido..." #: standalone/drakbackup:1039 #, c-format msgid "Backup User files..." msgstr "Cópia de segurança dos ficheiros do utilizador..." #: standalone/drakbackup:1073 #, c-format msgid "Backup Other files..." msgstr "Cópia de segurança de outros ficheiros..." #: standalone/drakbackup:1074 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Cópia de segunrança do disco em progresso..." #: standalone/drakbackup:1079 #, c-format msgid "No changes to backup!" msgstr "Nenhuma alteração para backup!" #: standalone/drakbackup:1095 standalone/drakbackup:1117 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Actividades do Drakbackup via %s:\n" "\n" #: standalone/drakbackup:1104 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Problema na conexão FTP : Não foi possível enviar o seus ficheiros backup " "por FTP.\n" #: standalone/drakbackup:1105 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Erro ao enviar os ficheiros por FTP. Por favor corrija a sua configuração " "FTP." #: standalone/drakbackup:1107 #, c-format msgid "file list sent by FTP: %s\n" msgstr "lista dos ficheiros enviada por FTP: %s\n" #: standalone/drakbackup:1122 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Actividades Drakbackup via CD:\n" "\n" #: standalone/drakbackup:1127 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Actividades Drakbackup via cassete:\n" "\n" #: standalone/drakbackup:1136 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "Erro ao enviar o correio. O e-mail do seu relatório não foi enviado." #: standalone/drakbackup:1137 #, c-format msgid " Error while sending mail. \n" msgstr " Erro ao enviar correio electrónico.\n" #: standalone/drakbackup:1167 #, c-format msgid "Can not create catalog!" msgstr "Não consigo criar o catalogo!" #: standalone/drakbackup:1321 #, c-format msgid "Problem installing %s" msgstr "Problemas ao instalar %s" #: standalone/drakbackup:1409 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Arquive (backup) os ficheiros do sistema. (directoria /etc)" #: standalone/drakbackup:1410 standalone/drakbackup:1473 #: standalone/drakbackup:1539 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "Usar backups com Diferencial (não substitui os backups antigos)" #: standalone/drakbackup:1412 standalone/drakbackup:1475 #: standalone/drakbackup:1541 #, c-format msgid "Use Incremental Backups" msgstr "Usar Backups com Incrementação" #: standalone/drakbackup:1412 standalone/drakbackup:1475 #: standalone/drakbackup:1541 #, c-format msgid "Use Differential Backups" msgstr "Usar backups com Diferencial" #: standalone/drakbackup:1414 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Não incluir ficheiros criticos (senhas, grupos, fstab)" #: standalone/drakbackup:1445 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" "Por favor marque todos os utilizadores que quer incluir na sua cópia de " "segurança(backup)." #: standalone/drakbackup:1472 #, c-format msgid "Do not include the browser cache" msgstr "Não inclua a cache do navegador" #: standalone/drakbackup:1526 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Escolha os ficheiros ou directórios e clique em 'OK'" #: standalone/drakbackup:1527 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "Remover Seleccionados" #: standalone/drakbackup:1590 #, c-format msgid "Users" msgstr "Utilizadores" #: standalone/drakbackup:1610 #, c-format msgid "Use network connection to backup" msgstr "Usar uma conexão à rede para arquivar(backup)" #: standalone/drakbackup:1612 #, c-format msgid "Net Method:" msgstr "Método Rede:" #: standalone/drakbackup:1616 #, c-format msgid "Use Expect for SSH" msgstr "Usar Expect para SSH" #: standalone/drakbackup:1617 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "Criar/Transferir senhas de backup para SSH" #: standalone/drakbackup:1619 #, c-format msgid "Transfer Now" msgstr "Transferir Agora" #: standalone/drakbackup:1621 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "Outras chaves (não drakbackup) já estão no sítio" #: standalone/drakbackup:1624 #, c-format msgid "Host name or IP." msgstr "Nome de endereço ou IP" #: standalone/drakbackup:1629 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "Directório (ou modulo) para colocar backup neste endereço." #: standalone/drakbackup:1641 #, c-format msgid "Remember this password" msgstr "Lembrar esta senha" #: standalone/drakbackup:1653 #, c-format msgid "Need hostname, username and password!" msgstr "É necessário o nome de endereço, do nome do utilizador e senha!" #: standalone/drakbackup:1744 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Usar CD/DVDROM para arquivar(backup)" #: standalone/drakbackup:1747 #, c-format msgid "Choose your CD/DVD device" msgstr "Escolha o dispositivo CD/DVD" #: standalone/drakbackup:1752 #, c-format msgid "Choose your CD/DVD media size" msgstr "Escolha o tamanho da media do CD/DVD" #: standalone/drakbackup:1759 #, c-format msgid "Multisession CD" msgstr "CD multi-sessão" #: standalone/drakbackup:1761 #, c-format msgid "CDRW media" msgstr "média CDRW" #: standalone/drakbackup:1767 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Apagar o média RW (1ª Sessão)" #: standalone/drakbackup:1768 #, c-format msgid " Erase Now " msgstr " Apagar Agora " #: standalone/drakbackup:1774 #, c-format msgid "DVD+RW media" msgstr "media DVD+RW" #: standalone/drakbackup:1776 #, c-format msgid "DVD-R media" msgstr "media DVD-R" #: standalone/drakbackup:1778 #, c-format msgid "DVDRAM device" msgstr "Dispositivo DVDRAM" #: standalone/drakbackup:1809 #, c-format msgid "No CD device defined!" msgstr "Nenhum dispositivo CD definido !" #: standalone/drakbackup:1851 #, c-format msgid "Use tape to backup" msgstr "Usar um leitor de cassetes para arquivar(backup)" #: standalone/drakbackup:1854 #, c-format msgid "Device name to use for backup" msgstr "Nome do dispositivo a usar para arquivar(backup)" #: standalone/drakbackup:1860 #, c-format msgid "Backup directly to tape" msgstr "Efectuar o backup directamente para a fita" #: standalone/drakbackup:1866 #, c-format msgid "Use tape hardware compression (EXPERIMENTAL)" msgstr "Usar hardware de compressão de fitas (EXPERIMENTAL)" #: standalone/drakbackup:1872 #, c-format msgid "Do not rewind tape after backup" msgstr "Não rebobinar a cassete depois do backup" #: standalone/drakbackup:1878 #, c-format msgid "Erase tape before backup" msgstr "Apagar cassete antes de arquivar(backup)" #: standalone/drakbackup:1884 #, c-format msgid "Eject tape after the backup" msgstr "Ejectar cassete depois de arquivar(backup)" #: standalone/drakbackup:1965 #, c-format msgid "Enter the directory to save to:" msgstr "Indique o directório para onde gravar:" #: standalone/drakbackup:1969 #, c-format msgid "Directory to save to" msgstr "Directoria onde gravar" #: standalone/drakbackup:1974 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" "Maximo espaço em disco\n" " alocados para backups (MB)" #: standalone/drakbackup:1978 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" "Apagar o incremento ou diferencial dos\n" " backups mais antigos que N dias\n" " (0 é manter todos os backups) para guardar espaço" #: standalone/drakbackup:2045 #, c-format msgid "CD-R / DVD-R" msgstr "CD-R / DVD-R" #: standalone/drakbackup:2050 #, c-format msgid "HardDrive / NFS" msgstr "Disco Rígido / NFS" #: standalone/drakbackup:2065 standalone/drakbackup:2066 #: standalone/drakbackup:2071 #, c-format msgid "hourly" msgstr "horáriamente" #: standalone/drakbackup:2065 standalone/drakbackup:2067 #: standalone/drakbackup:2072 #, c-format msgid "daily" msgstr "diáriamente" #: standalone/drakbackup:2065 standalone/drakbackup:2068 #: standalone/drakbackup:2073 #, c-format msgid "weekly" msgstr "semanalmente" #: standalone/drakbackup:2065 standalone/drakbackup:2069 #: standalone/drakbackup:2074 #, c-format msgid "monthly" msgstr "mensalmente" #: standalone/drakbackup:2065 standalone/drakbackup:2070 #: standalone/drakbackup:2075 #, c-format msgid "custom" msgstr "personalizado" #: standalone/drakbackup:2079 #, c-format msgid "January" msgstr "Janeiro" #: standalone/drakbackup:2079 #, c-format msgid "February" msgstr "Fevereiro" #: standalone/drakbackup:2079 #, c-format msgid "March" msgstr "Março" #: standalone/drakbackup:2080 #, c-format msgid "April" msgstr "Abril" #: standalone/drakbackup:2080 #, c-format msgid "May" msgstr "Maio" #: standalone/drakbackup:2080 #, c-format msgid "June" msgstr "Junho" #: standalone/drakbackup:2080 #, c-format msgid "July" msgstr "Julho" #: standalone/drakbackup:2080 #, c-format msgid "August" msgstr "Agosto" #: standalone/drakbackup:2080 #, c-format msgid "September" msgstr "Setembro" #: standalone/drakbackup:2081 #, c-format msgid "October" msgstr "Outubro" #: standalone/drakbackup:2081 #, c-format msgid "November" msgstr "Novembro" #: standalone/drakbackup:2081 #, c-format msgid "December" msgstr "Dezembro" #: standalone/drakbackup:2084 #, c-format msgid "Sunday" msgstr "Domingo" #: standalone/drakbackup:2084 #, c-format msgid "Monday" msgstr "Segunda" #: standalone/drakbackup:2084 #, c-format msgid "Tuesday" msgstr "Terça" #: standalone/drakbackup:2085 #, c-format msgid "Wednesday" msgstr "Quarta" #: standalone/drakbackup:2085 #, c-format msgid "Thursday" msgstr "Quinta" #: standalone/drakbackup:2085 #, c-format msgid "Friday" msgstr "Sexta" #: standalone/drakbackup:2085 #, c-format msgid "Saturday" msgstr "Sábado" #: standalone/drakbackup:2115 #, c-format msgid "Delete cron entry" msgstr "Apagar a linha cron" #: standalone/drakbackup:2116 #, c-format msgid "Add cron entry" msgstr "Adicionar a linha cron" #: standalone/drakbackup:2174 #, c-format msgid "Use daemon" msgstr "Usar servidor" #: standalone/drakbackup:2178 #, c-format msgid "Please choose the time interval between each backup" msgstr "Por favor escolha o intervalo de tempo entre cada cópia de segurança" #: standalone/drakbackup:2186 #, c-format msgid "Minute" msgstr "Minuto" #: standalone/drakbackup:2190 #, c-format msgid "Hour" msgstr "Hora" #: standalone/drakbackup:2194 #, c-format msgid "Day" msgstr "Dia" #: standalone/drakbackup:2198 #, c-format msgid "Month" msgstr "Mês" #: standalone/drakbackup:2202 #, c-format msgid "Weekday (start)" msgstr "Dia da Semana (inicio)" #: standalone/drakbackup:2206 #, c-format msgid "Weekday (end)" msgstr "Dia da Semana (fim)" #: standalone/drakbackup:2210 #, c-format msgid "Profile" msgstr "Perfil" #: standalone/drakbackup:2216 #, c-format msgid "Current crontab:" msgstr "Crontab actual:" #: standalone/drakbackup:2224 #, c-format msgid "Please choose the media for backup." msgstr "Por favor escolha a media a usar para arquivar(backup)." #: standalone/drakbackup:2228 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Assegure-se que o servidor cron está incluído nos seus serviços." #: standalone/drakbackup:2229 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" "Se a sua máquina não está sempre ligada, pode querer instalar o anacron." #: standalone/drakbackup:2293 #, c-format msgid "Please choose the archive program" msgstr "Por favor escolha o programa arquivador" #: standalone/drakbackup:2298 #, c-format msgid "Please choose the compression type" msgstr "Por favor escolha o tipo de compressão" #: standalone/drakbackup:2302 #, c-format msgid "Use .backupignore files" msgstr "Usar os ficheiros .backupignore" #: standalone/drakbackup:2304 #, c-format msgid "Send mail report after each backup to:" msgstr "Enviar por correio electrónico o relatório após cada backup para:" #: standalone/drakbackup:2310 #, c-format msgid "Return address for sent mail:" msgstr "Endereço de retorno para o correio enviado:" #: standalone/drakbackup:2316 #, c-format msgid "SMTP server for mail:" msgstr "Servidor SMTP para correio electrónico:" #: standalone/drakbackup:2320 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "Apagar os ficheiros tar no disco rígido depois de arquivar(backup) a outra " "media." #: standalone/drakbackup:2321 #, c-format msgid "View restore log after file restore." msgstr "Ver o registo depois de restaurar os ficheiros." #: standalone/drakbackup:2366 #, c-format msgid "What" msgstr "O quê" #: standalone/drakbackup:2371 #, c-format msgid "Where" msgstr "Onde" #: standalone/drakbackup:2376 #, c-format msgid "When" msgstr "Quando" #: standalone/drakbackup:2381 #, c-format msgid "More Options" msgstr "Mais Opções" #: standalone/drakbackup:2394 #, c-format msgid "Backup destination not configured..." msgstr "Destino do backup não configurado..." #: standalone/drakbackup:2414 standalone/drakbackup:4339 #, c-format msgid "Drakbackup Configuration" msgstr "Configuração de Drakbackup" #: standalone/drakbackup:2430 #, c-format msgid "Please choose where you want to backup" msgstr "Por favor escolha onde quer fazer a cópia de segurança (backup)" #: standalone/drakbackup:2433 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "Disco Rígido usado para preparar backups para todas as medias." #: standalone/drakbackup:2433 #, c-format msgid "Across Network" msgstr "Através da Rede" #: standalone/drakbackup:2433 #, c-format msgid "On CD-R" msgstr "No CD-R" #: standalone/drakbackup:2433 #, c-format msgid "On Tape Device" msgstr "No Dispositivo de Cassetes" #: standalone/drakbackup:2479 #, c-format msgid "Backup Users" msgstr "Backup dos Utilizadores" #: standalone/drakbackup:2480 #, c-format msgid " (Default is all users)" msgstr " (O predefinido é todos os utilizadores)" #: standalone/drakbackup:2493 #, c-format msgid "Please choose what you want to backup" msgstr "Por favor escolha o que quer arquivar(backup)" #: standalone/drakbackup:2494 #, c-format msgid "Backup System" msgstr "Backup do sistema" #: standalone/drakbackup:2496 #, c-format msgid "Select user manually" msgstr "Escolher o utilizador manualmente" #: standalone/drakbackup:2525 #, c-format msgid "Please select data to backup..." msgstr "Por favor escolha que dados quer arquivar(backup)..." #: standalone/drakbackup:2597 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Backup das Fontes (Sources): \n" #: standalone/drakbackup:2598 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Ficheiros do Sistema :\n" #: standalone/drakbackup:2600 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Ficheiros dos Utilizadores :\n" #: standalone/drakbackup:2602 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Outros Ficheiros:\n" #: standalone/drakbackup:2604 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Grava no Disco Rígido no caminho : %s\n" #: standalone/drakbackup:2605 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tLimitar a utilização do disco em %s MB\n" #: standalone/drakbackup:2606 #, c-format msgid "\tDelete backups older than %s day(s)\n" msgstr "\tApagar os backups mais antigos que %s dia(s)\n" #: standalone/drakbackup:2609 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Apagar os ficheiros tar no disco rígido depois de arquivar(backup).\n" #: standalone/drakbackup:2614 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Gravar no CD" #: standalone/drakbackup:2615 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2616 #, c-format msgid " on device: %s" msgstr " no dispositivo: %s" #: standalone/drakbackup:2617 #, c-format msgid " (multi-session)" msgstr " (multi-sessão)" #: standalone/drakbackup:2618 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Grava para a cassete no dispositivo : %s" #: standalone/drakbackup:2619 #, c-format msgid "\t\tErase=%s" msgstr "\t\tApaga=%s" #: standalone/drakbackup:2621 #, c-format msgid "\tBackup directly to Tape\n" msgstr "\t Arquivar/Backup directamente para a fita\n" #: standalone/drakbackup:2623 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Grava por %s no endereço: %s\n" #: standalone/drakbackup:2624 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t nome do utilizador : %s\n" "\t\t no caminho : %s \n" #: standalone/drakbackup:2625 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Opções:\n" #: standalone/drakbackup:2626 #, c-format msgid "\tDo not include System Files\n" msgstr "\tNão incluir os ficheiros do sistema\n" #: standalone/drakbackup:2628 #, c-format msgid "\tBackups use %s and bzip2\n" msgstr "\tOs arquivos/backups usam %s e bzip2\n" #: standalone/drakbackup:2629 #, c-format msgid "\tBackups use %s and gzip\n" msgstr "\tOs arquivos/backup usam %s e gzip\n" #: standalone/drakbackup:2630 #, c-format msgid "\tBackups use %s only\n" msgstr "\tOs arquivos/backups apenas usam %s\n" #: standalone/drakbackup:2632 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tUsar os ficheiros .backupignore\n" #: standalone/drakbackup:2633 #, c-format msgid "\tSend mail to %s\n" msgstr "\tEnviar correio electrónico para %s\n" #: standalone/drakbackup:2634 #, c-format msgid "\tSend mail from %s\n" msgstr "\tCorreio enviado de %s\n" #: standalone/drakbackup:2635 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\tUsando servidor SMTP %s\n" #: standalone/drakbackup:2637 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Servidor, %s via :\n" #: standalone/drakbackup:2638 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Disco Rígido.\n" #: standalone/drakbackup:2639 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: standalone/drakbackup:2640 #, c-format msgid "\t-Tape \n" msgstr "\t-Cassete \n" #: standalone/drakbackup:2641 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Rede por FTP.\n" #: standalone/drakbackup:2642 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Rede por SSH.\n" #: standalone/drakbackup:2643 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Rede por rsync.\n" #: standalone/drakbackup:2645 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Nenhuma configuração, por favor clique em Assistente ou Avançado.\n" #: standalone/drakbackup:2650 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Lista dos dados a restaurar :\n" "\n" #: standalone/drakbackup:2652 #, c-format msgid "- Restore System Files.\n" msgstr "- Restaurar Ficheiros do Sistema.\n" #: standalone/drakbackup:2654 standalone/drakbackup:2664 #, c-format msgid " - from date: %s %s\n" msgstr " - da data: %s %s\n" #: standalone/drakbackup:2657 #, c-format msgid "- Restore User Files: \n" msgstr "- Restaurar Ficheiros dos Utilizadores: \n" #: standalone/drakbackup:2662 #, c-format msgid "- Restore Other Files: \n" msgstr "- Restaurar Outros Ficheiros: \n" #: standalone/drakbackup:2841 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Lista dos dados danificados:\n" "\n" #: standalone/drakbackup:2843 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Por favor desmarque ou remova-o na próxima vez." #: standalone/drakbackup:2853 #, c-format msgid "Backup files are corrupted" msgstr "Os ficheiros arquivados/backup estão danificados" #: standalone/drakbackup:2874 #, c-format msgid " All of your selected data have been " msgstr " Todos os dados seleccionados foram " #: standalone/drakbackup:2875 #, c-format msgid " Successfully Restored on %s " msgstr " Restaurado com Sucesso em %s " #: standalone/drakbackup:2976 #, c-format msgid "/usr/bin/star not found, using tar..." msgstr "/usr/bin/star não encontrado, utilizo tar..." #: standalone/drakbackup:3012 #, c-format msgid " Restore Configuration " msgstr " Restaurar Configuração " #: standalone/drakbackup:3040 #, c-format msgid "OK to restore the other files." msgstr "OK para restaurar os outros ficheiros." #: standalone/drakbackup:3056 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Lista dos utilizadores a restaurar (só os dados mais recentes por utilizador " "são importantes)" #: standalone/drakbackup:3121 #, c-format msgid "Please choose the date to restore:" msgstr "Por favor escolha os dados a restaurar:" #: standalone/drakbackup:3158 #, c-format msgid "Restore from Hard Disk." msgstr "Restaurar do Disco Rígido." #: standalone/drakbackup:3160 #, c-format msgid "Enter the directory where backups are stored" msgstr "Indique o directório onde os arquivos/backups são guardados" #: standalone/drakbackup:3164 #, c-format msgid "Directory with backups" msgstr "Pasta com backups" #: standalone/drakbackup:3218 #, c-format msgid "Select another media to restore from" msgstr "Escolha outra media para onde restaurar" #: standalone/drakbackup:3220 #, c-format msgid "Other Media" msgstr "Outra Media" #: standalone/drakbackup:3225 #, c-format msgid "Restore system" msgstr "Restaurar Sistema" #: standalone/drakbackup:3226 #, c-format msgid "Restore Users" msgstr "Restaurar Utilizadores" #: standalone/drakbackup:3227 #, c-format msgid "Restore Other" msgstr "Restaurar Outros" #: standalone/drakbackup:3229 #, c-format msgid "Select path to restore (instead of /)" msgstr "Escolha o caminho onde restaurar (em vez de /)" #: standalone/drakbackup:3233 standalone/drakbackup:3514 #, c-format msgid "Path To Restore To" msgstr "Localização Para Onde Restaurar" #: standalone/drakbackup:3236 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Faça novo arquiv/backup antes de restaurar (apenas para os arquivos por " "incrementação)" #: standalone/drakbackup:3238 #, c-format msgid "Remove user directories before restore." msgstr "Remover directórios do utilizador antes de restaurar." #: standalone/drakbackup:3322 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" "String do texto do nome do ficheiro a procurar por (string vazia combina com " "tudo):" #: standalone/drakbackup:3325 #, c-format msgid "Search Backups" msgstr "Procurar Arquivos/Backups" #: standalone/drakbackup:3343 #, c-format msgid "No matches found..." msgstr "Nenhum resultado encontrado..." #: standalone/drakbackup:3347 #, c-format msgid "Restore Selected" msgstr "Restaurar Seleccionados" #: standalone/drakbackup:3482 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" "Clique em data/hora para ver os ficheiros backup.\n" "Ctrl-Clique nos ficheiros para seleccionar vários ficheiros." #: standalone/drakbackup:3488 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "Restaurar Entrada de\n" "Catalogo Seleccionada" #: standalone/drakbackup:3497 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Restaurar Ficheiros\n" "Seleccionados" #: standalone/drakbackup:3573 #, c-format msgid "Backup files not found at %s." msgstr "Backup de ficheiros não encontrado em %s" #: standalone/drakbackup:3586 #, c-format msgid "Restore From CD" msgstr "Restaurar Do CD" #: standalone/drakbackup:3586 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Insira o CD com o nome de volume %s\n" "no dispositivo de CD no ponto de montagem /mnt/cdrom" #: standalone/drakbackup:3588 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "Não é a etiqueta de CD correcta. O disco chama-se %s." #: standalone/drakbackup:3598 #, c-format msgid "Restore From Tape" msgstr "Restaurar Da Fita" #: standalone/drakbackup:3598 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Insira a cassete com o nome de volume %s\n" " no dispositivo de leitor de cassetes %s" #: standalone/drakbackup:3600 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Não é a etiqueta/cassete correcta. A cassete chama-se %s." #: standalone/drakbackup:3611 #, c-format msgid "Restore Via Network" msgstr "Restaurar Via Rede" #: standalone/drakbackup:3611 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Restaurar Via Protocolo de Rede: %s" #: standalone/drakbackup:3612 #, c-format msgid "Host Name" msgstr "Nome de Endereço" #: standalone/drakbackup:3613 #, c-format msgid "Host Path or Module" msgstr "Localização do Endereço ou Modulo" #: standalone/drakbackup:3620 #, c-format msgid "Password required" msgstr "Requer Senha" #: standalone/drakbackup:3626 #, c-format msgid "Username required" msgstr "Requer Nome de utilizador" #: standalone/drakbackup:3629 #, c-format msgid "Hostname required" msgstr "Requer Nome de Endereço" #: standalone/drakbackup:3634 #, c-format msgid "Path or Module required" msgstr "Requer Caminho ou Modulo" #: standalone/drakbackup:3646 #, c-format msgid "Files Restored..." msgstr "Ficheiros Restaurados..." #: standalone/drakbackup:3649 #, c-format msgid "Restore Failed..." msgstr "Restauração Falhada" #: standalone/drakbackup:3677 #, c-format msgid "%s not retrieved..." msgstr "%s não encontrado..." #: standalone/drakbackup:3901 standalone/drakbackup:3970 #, c-format msgid "Search for files to restore" msgstr "Procurar os ficheiros para restaurar" #: standalone/drakbackup:3905 #, c-format msgid "Restore all backups" msgstr "Restaurar todos os backups" #: standalone/drakbackup:3913 #, c-format msgid "Custom Restore" msgstr "Restauração Personalizada" #: standalone/drakbackup:3917 standalone/drakbackup:3966 #, c-format msgid "Restore From Catalog" msgstr "Restaurar Do Catálogo" #: standalone/drakbackup:3938 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Não consegue encontrar os backups para restaurar...\n" #: standalone/drakbackup:3939 #, c-format msgid "Verify that %s is the correct path" msgstr "Verifique que %s é o caminho correcto" #: standalone/drakbackup:3940 #, c-format msgid " and the CD is in the drive" msgstr " e o CD está no dispositivo" #: standalone/drakbackup:3942 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "Backups em média não montável. - Use o catálogo para restaurar" #: standalone/drakbackup:3958 #, c-format msgid "CD in place - continue." msgstr "CD no sitio - continue." #: standalone/drakbackup:3963 #, c-format msgid "Browse to new restore repository." msgstr "Procure um novo repositório de restauração." #: standalone/drakbackup:3964 #, c-format msgid "Directory To Restore From" msgstr "Directório De Onde Restaurar" #: standalone/drakbackup:4000 #, c-format msgid "Restore Progress" msgstr "Progressão da Restauração" #: standalone/drakbackup:4108 #, c-format msgid "Build Backup" msgstr "Criar Backup" #: standalone/drakbackup:4141 standalone/drakbackup:4438 #, c-format msgid "Restore" msgstr "Restaurar" #: standalone/drakbackup:4233 #, c-format msgid "Please select data to restore..." msgstr "Por favor escolha os dados a restaurar..." #: standalone/drakbackup:4273 #, c-format msgid "Backup system files" msgstr "Arquivar/Backup os ficheiros do sistema" #: standalone/drakbackup:4276 #, c-format msgid "Backup user files" msgstr "Arquivo/Backup dos ficheiros dos utilizadores" #: standalone/drakbackup:4279 #, c-format msgid "Backup other files" msgstr "Arquivo/Backup dos outros ficheiros" #: standalone/drakbackup:4282 standalone/drakbackup:4316 #, c-format msgid "Total Progress" msgstr "Progressão Total" #: standalone/drakbackup:4308 #, c-format msgid "Sending files by FTP" msgstr "A enviar ficheiros por FTP" #: standalone/drakbackup:4311 #, c-format msgid "Sending files..." msgstr "A enviar ficheiros..." #: standalone/drakbackup:4381 #, c-format msgid "Backup Now from configuration file" msgstr "Arquivar/Backup agora a partir do ficheiro de configuração" #: standalone/drakbackup:4386 #, c-format msgid "View Backup Configuration." msgstr "Ver Configuração do Arquivo/Backup" #: standalone/drakbackup:4412 #, c-format msgid "Wizard Configuration" msgstr "Assistente de Configuração" #: standalone/drakbackup:4417 #, c-format msgid "Advanced Configuration" msgstr "Configuração Avançada" #: standalone/drakbackup:4422 #, c-format msgid "View Configuration" msgstr "Ver Configuração" #: standalone/drakbackup:4426 #, c-format msgid "View Last Log" msgstr "Ver Último Registo" #: standalone/drakbackup:4431 #, c-format msgid "Backup Now" msgstr "Arquivar agora" #: standalone/drakbackup:4435 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Nenhum ficheiro de configuração encontrado \n" "Por favor clique em Assistente ou Avançado." #: standalone/drakbackup:4473 #, c-format msgid "Load profile" msgstr "Carregar perfil" #: standalone/drakbackup:4482 #, c-format msgid "Save profile as..." msgstr "Gravar o perfil como..." #: standalone/drakbackup:4504 standalone/drakbackup:4507 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:49 #, c-format msgid "No bootloader found, creating a new configuration" msgstr "Nenhum carregador de arranque encontrado, a criar nova configuração" #: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191 #: standalone/harddrake2:192 standalone/logdrake:69 #: standalone/printerdrake:150 standalone/printerdrake:151 #: standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "/_Ficheiro" #: standalone/drakboot:85 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "/Ficheiro/_Sair" #: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75 #: standalone/printerdrake:152 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:125 #, c-format msgid "Text only" msgstr "Apenas texto" #: standalone/drakboot:126 #, c-format msgid "Verbose" msgstr "Verboso" #: standalone/drakboot:127 #, c-format msgid "Silent" msgstr "Silencioso" #: standalone/drakboot:134 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" "O seu gestor de arranque não se encontra no modo framebuffer. Para activar o " "arranque gráfico, selecione o modo de vídeo gráfico a partir do utilitário " "de configuração do gestor de arranque." #: standalone/drakboot:135 #, c-format msgid "Do you want to configure it now?" msgstr "Deseja-o configurar agora ?" #: standalone/drakboot:144 #, c-format msgid "Install themes" msgstr "Instalar temas" #: standalone/drakboot:146 #, c-format msgid "Graphical boot theme selection" msgstr "Selecção do tema de arranque gráfico" #: standalone/drakboot:149 #, c-format msgid "Graphical boot mode:" msgstr "Modo de arranque gráfico:" #: standalone/drakboot:151 #, c-format msgid "Theme" msgstr "Tema" #: standalone/drakboot:154 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Mostrar tema\n" "na consola" #: standalone/drakboot:159 #, c-format msgid "Create new theme" msgstr "Criar um novo tema" #: standalone/drakboot:191 #, c-format msgid "Default user" msgstr "Utilizador predefinido" #: standalone/drakboot:192 #, c-format msgid "Default desktop" msgstr "Ecrâ predefinido" #: standalone/drakboot:195 #, c-format msgid "No, I do not want autologin" msgstr "Não, não quero auto-autenticação" #: standalone/drakboot:196 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Sim, quero auto-autenticação com este (utilizador, ecrâ)" #: standalone/drakboot:203 #, c-format msgid "System mode" msgstr "Modo do sistema" #: standalone/drakboot:206 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Execute o Ambiente Gráfico quando o seu sistema iniciar" #: standalone/drakboot:272 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" "Por favor escolha o modo vídeo, será aplicado para cada uma das entradas de " "arranque,\n" "escolhidas em baixo.\n" "Certifique-se que a sua placa de vídeo suporta o modo escolhido." #: standalone/drakbug:41 #, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "Ferramenta Mandriva Linux para Comunicar Erros" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "Centro de Controlo Mandriva Linux" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "Ferramenta de sincronização" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "Ferramentas Autónomas" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "Mandriva Online" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Controlo Remoto" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Gestor de Software" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "Ferramenta de Migração Windows" #: standalone/drakbug:58 standalone/draksambashare:1236 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Assistentes de Configuração" #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "Seleccione a Ferramenta Mandriva:" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" "ou Nome da Aplicação\n" "(ou Caminho Completo):" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Procurar Pacote" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Pacote: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Kernel:" #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" "Para enviar o relatorio de um erro, clique no botão comunicar.\n" "Isto irá abrir uma janela do navegador web em %s onde irá encontrar um " "formulario para preencher. A informação mostrada em cima irá\n" "ser transferida para esse servidor. Convém ter no seu relatório coisascomo " "os resultador do lspci, a versão do kernel, e o /proc/cpuinfo." #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "Relato" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "Não instalado" #: standalone/drakbug:174 #, c-format msgid "Package not installed" msgstr "Pacote não instalado" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "não definido" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "Alterar Fuso Horário" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Fuso Horário - DrakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "O relógio do hardware está definido com hora GMT?" #: standalone/drakclock:75 #, c-format msgid "Network Time Protocol" msgstr "Protocolo Horário de Rede (NTP)" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "O seu computador pode sincronizar o relógio\n" "com um servidor horário remoto usando NTP" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "Activar Protocolo Horário de Rede" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Servidor: " #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "Não pode sincronizar com %s." #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Restaurar" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "Precisamos instalar o pacote ntp \n" "para activar o Protocolo Horário de Rede\n" "\n" "Deseja instalar o pacote ntp ?" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "Configuração de Rede (%d adaptadores)" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Gateway:" msgstr "Gateway:" #: standalone/drakconnect:89 standalone/drakconnect:807 #, c-format msgid "Interface:" msgstr "Interface:" #: standalone/drakconnect:93 standalone/net_monitor:116 #, c-format msgid "Wait please" msgstr "Espere por favor" #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "Interface" #: standalone/drakconnect:109 standalone/printerdrake:224 #: standalone/printerdrake:231 #, c-format msgid "State" msgstr "Estado" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "Nome de endereço: " #: standalone/drakconnect:128 #, c-format msgid "Configure hostname..." msgstr "Configurar nome de endereço.." #: standalone/drakconnect:142 standalone/drakconnect:845 #, c-format msgid "LAN configuration" msgstr "Configuração LAN" #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "Configurar Rede de Área Local..." #: standalone/drakconnect:155 standalone/drakconnect:237 #: standalone/drakconnect:241 #, c-format msgid "Apply" msgstr "Aplicar" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "Gerir conexões" #: standalone/drakconnect:215 #, c-format msgid "Device selected" msgstr "Dispositivo seleccionado" #: standalone/drakconnect:296 #, c-format msgid "IP configuration" msgstr "Configuração do IP" #: standalone/drakconnect:335 #, c-format msgid "DNS servers" msgstr "Servidores DNS" #: standalone/drakconnect:343 #, c-format msgid "Search Domain" msgstr "Procurar Domínio" #: standalone/drakconnect:351 #, c-format msgid "static" msgstr "estático" #: standalone/drakconnect:351 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:515 #, c-format msgid "Flow control" msgstr "Controle do fluxo" #: standalone/drakconnect:516 #, c-format msgid "Line termination" msgstr "Términação da linha" #: standalone/drakconnect:527 #, c-format msgid "Modem timeout" msgstr "Intervalo de tempo do modem" #: standalone/drakconnect:531 #, c-format msgid "Use lock file" msgstr "Usar ficheiro lock" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "Aguardar pelo tom de chamada antes de marcar" #: standalone/drakconnect:536 #, c-format msgid "Busy wait" msgstr "Espera ocupada" #: standalone/drakconnect:541 #, c-format msgid "Modem sound" msgstr "Som do modem" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "Activar" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "Desactivar" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "Classe Média" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "Nome do Módulo" #: standalone/drakconnect:595 #, c-format msgid "Mac Address" msgstr "Endereço MAC" #: standalone/drakconnect:596 standalone/harddrake2:28 #: standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "Bus" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "Posição no bus" #: standalone/drakconnect:700 standalone/drakgw:311 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Nenhum adaptador de rede ethernet foi detectado no seu sistema. Por favor " "execute a ferramenta de configuração de hardware." #: standalone/drakconnect:708 #, c-format msgid "Remove a network interface" msgstr "Remova um interface de rede" #: standalone/drakconnect:712 #, c-format msgid "Select the network interface to remove:" msgstr "Escolha o interface de rede a remover:" #: standalone/drakconnect:744 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Ocorreu um erro ao apagar o interface de rede \"%s\":\n" "\n" "%s" #: standalone/drakconnect:745 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "Parabéns, o interface de rede \"%s\" foi apagado com sucesso" #: standalone/drakconnect:761 #, c-format msgid "No IP" msgstr "Nenhum IP" #: standalone/drakconnect:762 #, c-format msgid "No Mask" msgstr "Nenhuma máscara" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "up" msgstr "cima" #: standalone/drakconnect:763 standalone/drakconnect:916 #, c-format msgid "down" msgstr "baixo" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Connected" msgstr "Conectado" #: standalone/drakconnect:798 standalone/net_monitor:465 #, c-format msgid "Not connected" msgstr "Não conectado" #: standalone/drakconnect:800 #, c-format msgid "Disconnect..." msgstr "Desconectar..." #: standalone/drakconnect:800 #, c-format msgid "Connect..." msgstr "Conectar..." #: standalone/drakconnect:841 #, c-format msgid "Deactivate now" msgstr "Desactivar agora" #: standalone/drakconnect:841 #, c-format msgid "Activate now" msgstr "Activar agora" #: standalone/drakconnect:849 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Não tem nenhum interface configurado.\n" "Configure-os primeiro ao clicar em 'Configurar'" #: standalone/drakconnect:863 #, c-format msgid "LAN Configuration" msgstr "Configuração LAN" #: standalone/drakconnect:875 #, c-format msgid "Adapter %s: %s" msgstr "Adaptador %s: %s" #: standalone/drakconnect:884 #, c-format msgid "Boot Protocol" msgstr "Protocolo de Arranque" #: standalone/drakconnect:885 #, c-format msgid "Started on boot" msgstr "Iniciado no arranque" #: standalone/drakconnect:921 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" "Este interface ainda não foi configurado.\n" "Execute o assistente \"Adicionar um interface\" do Centro de Controlo " "Mandriva Linux" #: standalone/drakconnect:975 standalone/net_applet:51 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "Não tem qualquer conexão Internet configurada.\n" "Execute o assistente \"%s\" do Centro de Controlo Mandriva Linux" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Configurar um novo interface de rede (LAN, ISDN, ADSL, ...)" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "Configuração da conexão internet" #: standalone/drakconnect:994 #, c-format msgid "Third DNS server (optional)" msgstr "Terceiro Servidor DNS (opcional)" #: standalone/drakconnect:1016 #, c-format msgid "Internet Connection Configuration" msgstr "Configuração da Conexão Internet" #: standalone/drakconnect:1017 #, c-format msgid "Internet access" msgstr "Acesso Internet" #: standalone/drakconnect:1019 standalone/net_monitor:95 #, c-format msgid "Connection type: " msgstr "Tipo de conexão:" #: standalone/drakconnect:1022 #, c-format msgid "Status:" msgstr "Estado:" #: standalone/drakconnect:1027 #, c-format msgid "Parameters" msgstr "Parâmetros" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "GDM (GNOME Display Manager)" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "KDM (KDE Display Manager)" #: standalone/drakedm:42 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X Display Manager)" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "A escolher um gestor de ecrã" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "O Gestor de Ecrã X11 permite-lhe ligar-se graficamente\n" "ao seu sistema com o sistema X Window lançado e suporta executar várias\n" "sessoes X diferentes na sua máquina local ao mesmo tempo." #: standalone/drakedm:72 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "A alteração foi feita, deseja reiniciar o serviço dm ?" #: standalone/drakedm:73 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" "Irá fechar todos os programas activos e perder a sua sessão actual. Tem " "certeza que quer reiniciar o serviço dm ?" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "Procurar os tipos de letra instalados" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "Desmarque os tipos de letra instalados" #: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "analisar todos os tipos de letra" #: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "Nenhum tipo de letra encontrado" #: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326 #: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393 #: standalone/drakfont:411 standalone/drakfont:425 #, c-format msgid "done" msgstr "pronto" #: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "" "Não foi possível encontrar nenhum tipo de letra nas suas partições montadas" #: standalone/drakfont:257 #, c-format msgid "Reselect correct fonts" msgstr "Re-seleccionar os correctos tipos de letra" #: standalone/drakfont:260 #, c-format msgid "Could not find any font.\n" msgstr "Não foi possível encontrar nenhum tipo de letra.\n" #: standalone/drakfont:270 #, c-format msgid "Search for fonts in installed list" msgstr "Procura tipos de letra na lista instalada" #: standalone/drakfont:295 #, c-format msgid "%s fonts conversion" msgstr "conversão dos tipos de letra %s" #: standalone/drakfont:324 #, c-format msgid "Fonts copy" msgstr "Cópia dos tipos de letra" #: standalone/drakfont:327 #, c-format msgid "True Type fonts installation" msgstr "Instalação de tipos de letra True Type" #: standalone/drakfont:334 #, c-format msgid "please wait during ttmkfdir..." msgstr "por favor aguarde enquanto ttmkfdir..." #: standalone/drakfont:335 #, c-format msgid "True Type install done" msgstr "Instalação do tipo de letra True Type feita" #: standalone/drakfont:341 standalone/drakfont:356 #, c-format msgid "type1inst building" msgstr "compilar de type1inst" #: standalone/drakfont:350 #, c-format msgid "Ghostscript referencing" msgstr "Referencia Ghostscript" #: standalone/drakfont:360 #, c-format msgid "Suppress Temporary Files" msgstr "Suprimir Ficheiros Temporários" #: standalone/drakfont:363 #, c-format msgid "Restart XFS" msgstr "Reiniciar XFS" #: standalone/drakfont:409 standalone/drakfont:419 #, c-format msgid "Suppress Fonts Files" msgstr "Suprimir os Ficheiros dos Tipos de Letra" #: standalone/drakfont:421 #, c-format msgid "xfs restart" msgstr "reiniciar xfs" #: standalone/drakfont:429 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Antes de instalar qualquer tipo de letra, certifique-se que tem o direito de " "uso e instalar estes tipos de letra no seu sistema.\n" "\n" "Pode instalar os tipos de letra de uma maneira normal. Em raros casos tipos " "de letra falsos podem bloquear o servidor do X." #: standalone/drakfont:473 standalone/drakfont:482 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:483 #, c-format msgid "Font List" msgstr "Lista dos Tipos de Letra" #: standalone/drakfont:486 #, c-format msgid "Get Windows Fonts" msgstr "Obter Tipos de Letra Windows" #: standalone/drakfont:492 #, c-format msgid "About" msgstr "Acerca de" #: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724 #, c-format msgid "Uninstall" msgstr "Desinstalar" #: standalone/drakfont:495 #, c-format msgid "Import" msgstr "Importar" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:513 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" "Copyright © 2001-2002 por Mandriva \n" "\n" "\n" " DUPONT Sebastien (versão original)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " #: standalone/drakfont:522 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" " Este programa é software livre; pode redistribui-lo e/ou modificá-lo sob " "os\n" " termos da licença GNU GPL como publicada pela Fundação Free Sofware;\n" " seja na versão 2 ou (como optar) qualquer versão posterior.\n" "\n" "\n" " Este programa é distribuído na esperança que irá ser útil, mas SEM\n" " QUALQUER GARANTIA; mesmo sem a garantia implícita de VENDA ou de\n" " ADEQUAÇÃO A QUALQUER PORPÓSITO. Veja a licença GNU General Public\n" "License para mais detalhes.\n" "\n" "\n" " Deve ter recebido uma cópia da licença GNU GPL com este programa;\n" " se não, escreva para Free Software Foundation, Inc.,\n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." #: standalone/drakfont:538 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "Agradecimentos:\n" "\n" " - pfm2afm: \n" "\t por Ken Borgendale:\n" "\t Converte um ficheiro .pfm Windows para um ficheiro .afm (Adobe Font " "Metrics)\n" "\n" " - type1inst:\n" "\t por James Macnicol: \n" "\t o type1inst gera ficheiros fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t por Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Converte ficheiros de tipos de letra ttf para afm e pfb\n" #: standalone/drakfont:557 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Escolha as aplicações que irão suportar os tipos de letra:" #: standalone/drakfont:568 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:569 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:570 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:571 #, c-format msgid "Generic Printers" msgstr "Impressoras Genéricas" #: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Escolha o ficheiro dos tipos de letra e clique em 'Adicionar'" #: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "Selecção de Ficheiros" #: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "Tipos de Letra" #: standalone/drakfont:653 #, c-format msgid "Import fonts" msgstr "Importar tipos de letra" #: standalone/drakfont:658 #, c-format msgid "Install fonts" msgstr "Instalar tipos de letra" #: standalone/drakfont:691 #, c-format msgid "click here if you are sure." msgstr "clique aqui se tem certeza." #: standalone/drakfont:693 #, c-format msgid "here if no." msgstr "aqui se não." #: standalone/drakfont:732 #, c-format msgid "Unselected All" msgstr "Desmarcar Tudo" #: standalone/drakfont:735 #, c-format msgid "Selected All" msgstr "Seleccionar Tudo" #: standalone/drakfont:738 #, c-format msgid "Remove List" msgstr "Remover Lista" #: standalone/drakfont:749 standalone/drakfont:768 #, c-format msgid "Importing fonts" msgstr "Importar tipos de letra" #: standalone/drakfont:753 standalone/drakfont:773 #, c-format msgid "Initial tests" msgstr "Testes iniciais" #: standalone/drakfont:754 #, c-format msgid "Copy fonts on your system" msgstr "Copiar tipos de letra no seu sistema" #: standalone/drakfont:755 #, c-format msgid "Install & convert Fonts" msgstr "Instalar & converter tipos de letra" #: standalone/drakfont:756 #, c-format msgid "Post Install" msgstr "Pós-instalação" #: standalone/drakfont:774 #, c-format msgid "Remove fonts on your system" msgstr "Remover tipos de letra no seu sistema" #: standalone/drakfont:775 #, c-format msgid "Post Uninstall" msgstr "Pós Desinstalação" #: standalone/drakgw:50 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Desculpe, apenas é suportado o kernel 2.4 e superiores." #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "Partilha da Conexão Internet" #: standalone/drakgw:79 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Está prestes a configurar o seu computador para partilhar a Conexão " "Internet.\n" "Com esta característica, outros computadores na sua rede local poderão usar " "a conexão internet deste computador.\n" "\n" "Certifique-se que já configurou o seu acesso Rede/Internet com drakconnect " "antes de proseguir. \n" "Nota: precisa de um Adaptador de Rede dedicado para configurar uma Rede de " "Área Local (LAN)." #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração da Partilha da Conexão Internet já foi feita.\n" "Está actualmente activa.\n" "\n" "O que deseja fazer?" #: standalone/drakgw:99 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração da partilha da conexão Internet já foi feita.\n" "Está actualmente desactivada.\n" "\n" "O que deseja fazer?" #: standalone/drakgw:105 #, c-format msgid "Reconfigure" msgstr "Reconfigurar" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Existe apenas um adaptador de rede configurado no seu sistema:\n" "\n" "%s\n" "\n" "Está-se prestes a configurar a sua Rede de Área Local com esse adaptador." #: standalone/drakgw:156 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Por favor escolha que adaptador de rede estará ligado a sua Rede de Área " "Local." #: standalone/drakgw:177 #, c-format msgid "Local Area Network settings" msgstr "Configuração da Rede Local" #: standalone/drakgw:180 #, c-format msgid "Local IP address" msgstr "Endereço IP local" #: standalone/drakgw:182 #, c-format msgid "The internal domain name" msgstr "O nome interno do domínio" #: standalone/drakgw:188 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "Potencial conflito de endereços LAN encontrado na configuração actual de %" "s!\n" #: standalone/drakgw:204 #, c-format msgid "Domain Name Server (DNS) configuration" msgstr "Configuração do Domain Name Server (DNS)" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "Use este gateway como servidor de nome de domínio" #: standalone/drakgw:209 #, c-format msgid "The DNS Server IP" msgstr "O IP do Servidor DNS" #: standalone/drakgw:236 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "Configuração do Servidor DHCP.\n" "\n" "Aqui pode escolher as diferentes opções para a configuração do servidor\n" "DHCP. Se desconhecer o significado de uma opção, deixe-a como está." #: standalone/drakgw:243 #, c-format msgid "Use automatic configuration (DHCP)" msgstr "Use configuração automática (DHCP)" #: standalone/drakgw:244 #, c-format msgid "The DHCP start range" msgstr "O inicio da extensão DHCP" #: standalone/drakgw:245 #, c-format msgid "The DHCP end range" msgstr "O fim da extensão DHCP" #: standalone/drakgw:246 #, c-format msgid "The default lease (in seconds)" msgstr "A duração predefinida (em segundos)" #: standalone/drakgw:247 #, c-format msgid "The maximum lease (in seconds)" msgstr "A duração máxima (em segundos)" #: standalone/drakgw:270 #, c-format msgid "Proxy caching server (SQUID)" msgstr "Servidor Proxy com cache (SQUID)" #: standalone/drakgw:274 #, c-format msgid "Use this gateway as proxy caching server" msgstr "Use este gateway como servidor proxy com cache" #: standalone/drakgw:275 #, c-format msgid "Admin mail" msgstr "Admin correio" #: standalone/drakgw:276 #, c-format msgid "Visible hostname" msgstr "Nome de endereço vísivel" #: standalone/drakgw:277 #, c-format msgid "Proxy port" msgstr "Porta do proxy" #: standalone/drakgw:278 #, c-format msgid "Cache size (MB)" msgstr "Tamanho da cache (MB)" #: standalone/drakgw:300 #, c-format msgid "Broadcast printer information" msgstr "Informação de transmissão da impressora" #: standalone/drakgw:317 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "A Partilha da Conexão Internet está agora activada." #: standalone/drakgw:323 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "A Partilha da Conexão Internet está agora desactivada." #: standalone/drakgw:329 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Foi tudo configurado.\n" "Pode agora partilhar a sua Conexão Internet com outros computadores na sua " "Rede Local, usando a configuração de rede automática (DHCP).e um servidor " "Transparente Proxy Cache (SQUID)." #: standalone/drakgw:364 #, c-format msgid "Disabling servers..." msgstr "A desactivar servidores..." #: standalone/drakgw:378 #, c-format msgid "Firewalling configuration detected!" msgstr "Configuração firewall detectada!" #: standalone/drakgw:379 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Aviso! Uma configuração firewall existente foi detectada. Pode precisar de " "algumas correcções manuais a seguir à instalação." #: standalone/drakgw:384 #, c-format msgid "Configuring..." msgstr "A configurar..." #: standalone/drakgw:385 #, c-format msgid "Configuring firewall..." msgstr "A configurar firewall..." #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "É software livre e pode ser redistribuído nos termos GNU GPL.\n" "\n" "Uso: \n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - mostra esta ajuda \n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" " --id - carrega a página html de ajuda que se refere a " "id_label\n" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" " --doc - liga a outra página web (para o interface WM bem-" "vindo )\n" #: standalone/drakhelp:51 #, c-format msgid "Mandriva Linux Help Center" msgstr "Centro de Ajuda Mandriva Linux" #: standalone/drakhelp:51 #, c-format msgid "No Help entry for %s\n" msgstr "Nenhuma ajuda para %s\n" #: standalone/drakhosts:98 #, c-format msgid "Please add an host to be able to modify it." msgstr "Por favor adicione um endereço para o poder modificar." #: standalone/drakhosts:108 #, c-format msgid "Please modify information" msgstr "Por favor modifique a informação" #: standalone/drakhosts:109 #, c-format msgid "Please delete information" msgstr "Por favor apague a informação" #: standalone/drakhosts:110 #, c-format msgid "Please add information" msgstr "Por favor adicione a informação" #: standalone/drakhosts:115 #, c-format msgid "IP address:" msgstr "Endereço IP:" #: standalone/drakhosts:116 #, c-format msgid "Host name:" msgstr "Nome do endereço:" #: standalone/drakhosts:117 #, c-format msgid "Host Aliases:" msgstr "Apelidos do endereço:" #: standalone/drakhosts:123 #, c-format msgid "Please enter a valid IP address." msgstr "Por favor indique um endereço IP válido." #: standalone/drakhosts:129 #, c-format msgid "Same IP is already in %s file." msgstr "O mesmo IP já se encontra no ficheiro %s." #: standalone/drakhosts:197 #, c-format msgid "Host Aliases" msgstr "Apelidos do Endereço" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "O DrakHOSTS gere definições dos endereços" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "Falha ao adicionar endereço." #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "Falha ao modificar o endereço." #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "Falha ao remover o endereço." #: standalone/drakids:26 #, c-format msgid "Allowed addresses" msgstr "Endereços permitidos" #: standalone/drakids:57 #, c-format msgid "Log" msgstr "Registar" #: standalone/drakids:61 #, c-format msgid "Clear logs" msgstr "Limpar registos" #: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470 #, c-format msgid "Blacklist" msgstr "Lista negra" #: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475 #, c-format msgid "Whitelist" msgstr "Lista branca" #: standalone/drakids:71 #, c-format msgid "Remove from blacklist" msgstr "Remover da lista negra" #: standalone/drakids:72 #, c-format msgid "Move to whitelist" msgstr "Mover para a lista branca" #: standalone/drakids:84 #, c-format msgid "Remove from whitelist" msgstr "Remover da lista branca" #: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170 #: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265 #: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385 #, c-format msgid "Unable to contact daemon" msgstr "Não foi possível contactar o servidor" #: standalone/drakids:202 #, c-format msgid "Date" msgstr "Data" #: standalone/drakids:203 #, c-format msgid "Attacker" msgstr "Atacante" #: standalone/drakids:204 #, c-format msgid "Attack type" msgstr "Tipo de ataque" #: standalone/drakids:205 #, c-format msgid "Service" msgstr "Serviço" #: standalone/drakids:206 standalone/net_applet:72 #, c-format msgid "Network interface" msgstr "Interface de rede" #: standalone/draknfs:41 #, c-format msgid "map root user as anonymous" msgstr "traçar utilizador root como anónimo" #: standalone/draknfs:42 #, c-format msgid "map all users to anonymous user" msgstr "traçar todos os utilizadores como anónimos" #: standalone/draknfs:43 #, c-format msgid "No user UID mapping" msgstr "Traçamento do UID Utilizador" #: standalone/draknfs:44 #, c-format msgid "allow real remote root access" msgstr "permitir acesso root remoto real" #: standalone/draknfs:83 #, c-format msgid "NFS server" msgstr "Servidor NFS" #: standalone/draknfs:83 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "Restaurar/Recarregar servidor NFS..." #: standalone/draknfs:84 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "Erro ao Restaurar/Recarregar servidor NFS" #: standalone/draknfs:100 standalone/draksambashare:203 #, c-format msgid "Directory Selection" msgstr "Selecção de Directório" #: standalone/draknfs:105 standalone/draksambashare:208 #, c-format msgid "Should be a directory." msgstr "Deve ser um directório." #: standalone/draknfs:136 #, c-format msgid "" "NFS clients may be specified in a number of " "ways:\n" "\n" "\n" "single host: a host either by an " "abbreviated name recognized be the resolver, fully qualified domain name, or " "an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given " "as @group.\n" "\n" "\n" "wildcards: machine names may contain " "the wildcard characters * and ?. For instance: *.cs.foo.edu matches all " "hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export " "directories to all hosts on an IP (sub-)network simultaneously. for example, " "either `/255.255.252.0' or `/22' appended to the network base address " "result.\n" msgstr "" "Clientes NFS podem ser indicados através de " "várias maneiras:\n" "\n" "\n" "endereço único: um endereço por um " "nome abreviado reconhecido pelo protocolo que faz a resolução, um nome de " "domínio totalmente qualificado, ou um endereço IP\n" "\n" "\n" "grupos de rede: os grupos de rede NIS " "podem ser dados como @grupo.\n" "\n" "\n" "asteriscos: os nomes de máquinas " "podem conter os caracteres * e ?. Por exemplo: *.cs.foo.edu corresponde a " "todos os endereços do domínio cs.foo.edu.\n" "\n" "\n" "redes IP: pode também exportar " "directórios para todos os endereços simultâneamente num IP de (sub-)rede. " "Por exemplo, `/255.255.252.0' ou `/22' junto ao resultado do endereço base " "da rede.\n" #: standalone/draknfs:151 #, c-format msgid "" "User ID options\n" "\n" "\n" "map root user as anonymous: map " "requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n" "\n" "\n" "allow real remote root access: turn " "off root squashing. This option is mainly useful for diskless clients " "(no_root_squash).\n" "\n" "\n" "map all users to anonymous user: map " "all uids and gids to the anonymous user (all_squash). Useful for NFS-" "exported public FTP directories, news spool directories, etc. The opposite " "option is no user UID mapping (no_all_squash), which is the default " "setting.\n" "\n" "\n" "anonuid and anongid: explicitly set " "the uid and gid of the anonymous account.\n" msgstr "" "Opções ID Utilizador\n" "\n" "\n" "traçar utilizador root como anónimo: " "pedidos de traçamento do uid/gid 0 para o uid/gid anónimo (root_squash).\n" "\n" "\n" "permitir acesso root remoto real: " "desligar o esmagamento root. Esta opção é muito útil para clientes sem disco " "(no_root_squash).\n" "\n" "\n" "traçar todos os utilizadoresspara utilizador " "anónimo: traçar todos os uids e gids para utilizador anónimo " "(all_squash). Útil para directórios FTP públicos exportados-NFS, directórios " "de notícias em fila, etc. A opção oposta é nenhum traçamento UID de " "utilizador (no_all_squash), que é a opção predefinida.\n" "\n" "\n" "anonuid e anongid: definir " "explicitamente o uid e o gid da conta anónima.\n" #: standalone/draknfs:167 #, c-format msgid "Synchronous access:" msgstr "Acesso síncrono:" #: standalone/draknfs:168 #, c-format msgid "Secured Connection:" msgstr "Ligação Segurada:" #: standalone/draknfs:169 #, c-format msgid "Read-Only share:" msgstr "Partilha de Apenas-Leitura:" #: standalone/draknfs:171 #, c-format msgid "Advanced Options" msgstr "Opções Avançadas" #: standalone/draknfs:172 #, c-format msgid "" "%s: this option requires that " "requests originate on an internet port less than IPPORT_RESERVED (1024). " "This option is on by default." msgstr "" "%s: esta opção pede os pedidos " "originados numa porta internet menor que uma IPPORT_RESERVED (1024). Esta " "opção está activada por omissão." #: standalone/draknfs:173 #, c-format msgid "" "%s: allow either only read or both " "read and write requests on this NFS volume. The default is to disallow any " "request which changes the filesystem. This can also be made explicit by " "using this option." msgstr "" "%s: permite pedidos de apenas-leitura " "ou leitura e escrita neste volume NFS. O valor predefinido é para não " "permitir qualquer pedido que mude o sistema de ficheiros. Isto pode também " "ser feito explicitamente ao usar esta opção." #: standalone/draknfs:174 #, c-format msgid "" "%s: disallows the NFS server to " "violate the NFS protocol and to reply to requests before any changes made by " "these requests have been committed to stable storage (e.g. disc drive)." msgstr "" "%s: não permite ao servidor NFS " "violar o protocolo NFS e responder aos pedidos antes que qualquer alteração " "tenha sido feita por estes pedidos para estabelecer o armazenamento (p.ex. " "disco)" #: standalone/draknfs:306 #, c-format msgid "Please add an NFS share to be able to modify it." msgstr "Por favor adicione uma partilha NFS para a poder modificar." #: standalone/draknfs:378 #, c-format msgid "Advanced Options Help" msgstr "Ajuda das Opções Avançadas" #: standalone/draknfs:389 #, c-format msgid "NFS directory" msgstr "Directório NFS" #: standalone/draknfs:391 standalone/draksambashare:594 #: standalone/draksambashare:773 #, c-format msgid "Directory:" msgstr "Directório:" #: standalone/draknfs:394 #, c-format msgid "Host access" msgstr "Acesso do endereço" #: standalone/draknfs:396 #, c-format msgid "Access:" msgstr "Acesso:" #: standalone/draknfs:396 #, c-format msgid "Hosts Access" msgstr "Acesso dos Endereços" #: standalone/draknfs:399 #, c-format msgid "User ID Mapping" msgstr "Traçamento do ID Utilizador" #: standalone/draknfs:401 #, c-format msgid "User ID:" msgstr "ID Utilizador:" #: standalone/draknfs:401 #, c-format msgid "Help User ID" msgstr "Ajudar ID Utilizador" #: standalone/draknfs:402 #, c-format msgid "Anonymous user ID:" msgstr "ID utilizador anónimo:" #: standalone/draknfs:403 #, c-format msgid "Anonymous Group ID:" msgstr "ID grupo anónimo:" #: standalone/draknfs:444 #, c-format msgid "Can't create this directory." msgstr "Não é possível criar este directório." #: standalone/draknfs:447 #, c-format msgid "You must specify hosts access." msgstr "Deve indicar o acesso dos endereços." #: standalone/draknfs:527 #, c-format msgid "Share Directory" msgstr "Partilhar Directório" #: standalone/draknfs:527 #, c-format msgid "Hosts Wildcard" msgstr "Strings de Caracteres dos Endereços" #: standalone/draknfs:527 #, c-format msgid "General Options" msgstr "Opções Gerais" #: standalone/draknfs:527 #, c-format msgid "Custom Options" msgstr "Opções Personalizadas" #: standalone/draknfs:539 standalone/draksambashare:631 #: standalone/draksambashare:798 #, c-format msgid "Please enter a directory to share." msgstr "Por favor indique um directório para partilhar." #: standalone/draknfs:546 #, c-format msgid "Please use the modify button to set right access." msgstr "" "Por favor indique o botão de modificação para definir o acesso correcto." #: standalone/draknfs:600 #, c-format msgid "DrakNFS manage NFS shares" msgstr "O DrakNFS gere as patilhas NFS" #: standalone/draknfs:609 #, c-format msgid "Failed to add NFS share." msgstr "Falha ao adicionar a partilha NFS." #: standalone/draknfs:616 #, c-format msgid "Failed to Modify NFS share." msgstr "Falha ai modificar a partilha NFS." #: standalone/draknfs:623 #, c-format msgid "Failed to remove an NFS share." msgstr "Falha ao remover a partilha NFS." #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "Definições do sistema" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "Definições personalizadas" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "Definições do sistema & personalizadas" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "Editável" #: standalone/drakperm:48 standalone/drakperm:323 #: standalone/draksambashare:101 #, c-format msgid "Path" msgstr "Localização" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "Utilizador" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Grupo" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "Permissões" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "Adicionar nova regra" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "Editar regra actual" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Aqui pode ver ficheiros para usar para corrigir as permissões, donos, e " "grupos via msec.\n" "Pode também editar as suas próprias regras que irão sobrepor as regras " "predefinidas." #: standalone/drakperm:109 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "O nível de segurança actual é %s.\n" "Seleccione permissões para ver/editar" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "Subir" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "Mover regra seleccionada um nível acima" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "Descer" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "Mover regra seleccionada um nível abaixo" #: standalone/drakperm:122 #, c-format msgid "Add a rule" msgstr "Adicionar regra" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "Adicionar nova regra no fim" #: standalone/drakperm:123 #, c-format msgid "Delete selected rule" msgstr "Apagar regra selecionada" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "procurar" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "utilizador" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "grupo" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "outro" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Ler" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Permitir ao \"%s\" ler o ficheiro" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Escrever" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Permite ao \"%s\" escrever no ficheiro" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Executar" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Permite ao \"%s\" executar o ficheiro" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "Sticky-bit" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Usado para directório:\n" " apenas o dono do directório ou do ficheiro neste directório pode apagar" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "Definir UID" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "Usar id do dono para execução" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "Definir GID" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "Usar id do grupo para execução" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Utilizador:" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "Grupo:" #: standalone/drakperm:298 #, c-format msgid "Current user" msgstr "Utilizador actual" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "Quando marcado, o dono e o grupo não serão mudados" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "Selecção da localização" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "Propriedades" #: standalone/drakperm:380 #, c-format msgid "" "The first character of the path must be a slash (\"/\"):\n" "\"%s\"" msgstr "" "A primeira letra do caminho deve ser um slash (\"/\"):\n" "\"%s\"" #: standalone/drakperm:390 #, c-format msgid "Both the username and the group must valid!" msgstr "Ambos o utilizador e o grupo devem ser válidos!" #: standalone/drakperm:391 #, c-format msgid "User: %s" msgstr "Utilizador: %s" #: standalone/drakperm:392 #, c-format msgid "Group: %s" msgstr "Grupo: %s" #: standalone/drakroam:33 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "Não tem qualquer interface wireless.\n" "Execute o assistente \"%s\" do Centro de Controlo Mandriva Linux" #: standalone/drakroam:48 #, c-format msgid "SSID" msgstr "SSID" #: standalone/drakroam:49 #, c-format msgid "Signal strength" msgstr "Força do sinal" #: standalone/drakroam:51 #, c-format msgid "Encryption" msgstr "Encriptação" #: standalone/drakroam:112 #, c-format msgid "Please enter settings for wireless network \"%s\"" msgstr "Por favor indique as definições para a rede wireless \"%s\"" #: standalone/drakroam:123 #, c-format msgid "DNS server" msgstr "Servidor DNS" #: standalone/drakroam:228 #, c-format msgid "Connect" msgstr "Conectar" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:229 standalone/printerdrake:251 #, c-format msgid "Refresh" msgstr "Refrescar" #: standalone/draksambashare:68 #, c-format msgid "Share directory" msgstr "Partilhar directório" #: standalone/draksambashare:69 standalone/draksambashare:102 #, c-format msgid "Comment" msgstr "Comentar" #: standalone/draksambashare:70 standalone/draksambashare:103 #, c-format msgid "Browseable" msgstr "Pesquisável" #: standalone/draksambashare:71 #, c-format msgid "Public" msgstr "Público" #: standalone/draksambashare:72 standalone/draksambashare:108 #, c-format msgid "Writable" msgstr "Gravável" #: standalone/draksambashare:73 standalone/draksambashare:149 #, c-format msgid "Create mask" msgstr "Criar máscara" #: standalone/draksambashare:74 standalone/draksambashare:150 #, c-format msgid "Directory mask" msgstr "Directório da máscara" #: standalone/draksambashare:75 #, c-format msgid "Read list" msgstr "Ler lista" #: standalone/draksambashare:76 standalone/draksambashare:109 #: standalone/draksambashare:608 #, c-format msgid "Write list" msgstr "Escrever lista" #: standalone/draksambashare:77 standalone/draksambashare:141 #, c-format msgid "Admin users" msgstr "Administrar utilizadores" #: standalone/draksambashare:78 standalone/draksambashare:142 #, c-format msgid "Valid users" msgstr "Utilizadores válidos" #: standalone/draksambashare:79 #, c-format msgid "Inherit Permissions" msgstr "Permissões Inherit" #: standalone/draksambashare:80 standalone/draksambashare:143 #, c-format msgid "Hide dot files" msgstr "Esconder ficheiros com ponto" #: standalone/draksambashare:82 standalone/draksambashare:148 #, c-format msgid "Preserve case" msgstr "Preservar caso" #: standalone/draksambashare:83 #, c-format msgid "Force create mode" msgstr "Forçar modo criar" #: standalone/draksambashare:84 #, c-format msgid "Force group" msgstr "Forçar grupo" #: standalone/draksambashare:85 standalone/draksambashare:147 #, c-format msgid "Default case" msgstr "Caso predefinido" #: standalone/draksambashare:100 #, c-format msgid "Printer name" msgstr "Nome da impressora" #: standalone/draksambashare:104 standalone/draksambashare:600 #, c-format msgid "Printable" msgstr "Imprimivel" #: standalone/draksambashare:105 #, c-format msgid "Print Command" msgstr "Comando de Impressão" #: standalone/draksambashare:106 #, c-format msgid "LPQ command" msgstr "Comando LPQ" #: standalone/draksambashare:107 #, c-format msgid "Guest ok" msgstr "Convidado ok" #: standalone/draksambashare:110 standalone/draksambashare:151 #: standalone/draksambashare:609 #, c-format msgid "Inherit permissions" msgstr "Permissões inherit" #: standalone/draksambashare:112 #, c-format msgid "Create mode" msgstr "Modo criar" #: standalone/draksambashare:113 #, c-format msgid "Use client driver" msgstr "Usar controlador do cliente" #: standalone/draksambashare:139 #, c-format msgid "Read List" msgstr "Ler Lista" #: standalone/draksambashare:140 #, c-format msgid "Write List" msgstr "Escrever Lista" #: standalone/draksambashare:145 #, c-format msgid "Force Group" msgstr "Forçar Grupo" #: standalone/draksambashare:146 #, c-format msgid "Force create group" msgstr "Forçar criação de grupo" #: standalone/draksambashare:166 #, c-format msgid "About Draksambashare" msgstr "Acerca do Draksambashare" #: standalone/draksambashare:166 #, c-format msgid "" "Mandriva Linux \n" "Release: %s\n" "Author: Antoine Ginies\n" "\n" "This is a simple tool to easily manage Samba configuration." msgstr "" "Mandriva Linux \n" "Lançamento: %s\n" "Autor: Antoine Ginies\n" "\n" "Esta é uma simples ferramenta para fácilmente gerir a configuração Samba." #: standalone/draksambashare:186 #, c-format msgid "Samba server" msgstr "Servidor Samba" #: standalone/draksambashare:186 #, c-format msgid "Restarting/Reloading Samba server..." msgstr "Reiniciar/Recarregar servidor Samba..." #: standalone/draksambashare:187 #, c-format msgid "Error Restarting/Reloading Samba server" msgstr "Erro ao Reiniciar/Recarregar servidor Samba" #: standalone/draksambashare:373 #, c-format msgid "Add a Samba share" msgstr "Adicionar partilha Samba" #: standalone/draksambashare:376 #, c-format msgid "Goal of this wizard is to easily create a new Samba share." msgstr "" "O objectivo deste assistente é fácilmente criar uma nova partilha Samba." #: standalone/draksambashare:378 #, c-format msgid "Name of the share:" msgstr "Nome da partilha:" #: standalone/draksambashare:379 standalone/draksambashare:593 #: standalone/draksambashare:774 #, c-format msgid "Comment:" msgstr "Comentário:" #: standalone/draksambashare:380 #, c-format msgid "Path:" msgstr "Localização:" #: standalone/draksambashare:385 #, c-format msgid "" "Share with the same name already exist or share name empty, please choose " "another name." msgstr "" "Partilha com o mesmo nome já existente ou nome de partilha vazio, por favor " "escolhe outro nome." #: standalone/draksambashare:389 standalone/draksambashare:395 #, c-format msgid "Can't create the directory, please enter a correct path." msgstr "" "Não é possível criar o directório, por favor indique a localização correcta." #: standalone/draksambashare:392 standalone/draksambashare:629 #: standalone/draksambashare:796 #, c-format msgid "Please enter a Comment for this share." msgstr "Por favor indique um Comentário para esta partilha." #: standalone/draksambashare:423 #, c-format msgid "" "The wizard successfully added the Samba share. Now just double click on it " "in treeview to modify it" msgstr "" "O assistente adicionou com sucesso a partilha Samba. Agora apenas faça duplo " "clique na partilha na vista em árvore para a modificar" #: standalone/draksambashare:439 #, c-format msgid "pdf-gen - a PDF generator" msgstr "pdf-gen - um gerador de PDF" #: standalone/draksambashare:440 #, c-format msgid "printers - all printers available" msgstr "impressoras - todas as impressoras disponíveis" #: standalone/draksambashare:444 #, c-format msgid "Add Special Printer share" msgstr "Adicionar Partilha de Impressora Especial" #: standalone/draksambashare:447 #, c-format msgid "" "Goal of this wizard is to easily create a new special printer Samba share." msgstr "" "O objectivo deste assistente é fácilmente criar uma nova partilha Samba de " "impressoras." #: standalone/draksambashare:455 #, c-format msgid "A PDF generator already exists." msgstr "Já existe um gerador de PDF." #: standalone/draksambashare:479 #, c-format msgid "Printers and print$ already exist." msgstr "Impressoras e impressora já existentes." #: standalone/draksambashare:530 #, c-format msgid "The wizard successfully added the printer Samba share" msgstr "O assistente adicionou com sucesso a partilha de impressora Samba" #: standalone/draksambashare:553 #, c-format msgid "Please add or select a Samba printer share to be able to modify it." msgstr "" "Por favor adicione ou seleccione uma partilha Samba de impressoras para a " "poder modificar." #: standalone/draksambashare:589 #, c-format msgid "Printer share" msgstr "Partilha da impressora" #: standalone/draksambashare:592 #, c-format msgid "Printer name:" msgstr "Nome da impressora:" #: standalone/draksambashare:598 standalone/draksambashare:779 #, c-format msgid "Writable:" msgstr "Gravável:" #: standalone/draksambashare:599 standalone/draksambashare:780 #, c-format msgid "Browseable:" msgstr "Pesquisável:" #: standalone/draksambashare:604 #, c-format msgid "Advanced options" msgstr "Opções avançadas" #: standalone/draksambashare:606 #, c-format msgid "Printer access" msgstr "Acesso da impressora" #: standalone/draksambashare:610 #, c-format msgid "Guest ok:" msgstr "Convidado ok:" #: standalone/draksambashare:611 #, c-format msgid "Create mode:" msgstr "Modo criar:" #: standalone/draksambashare:615 #, c-format msgid "Printer command" msgstr "Comando da impressora" #: standalone/draksambashare:617 #, c-format msgid "Print command:" msgstr "Comando da impressora:" #: standalone/draksambashare:618 #, c-format msgid "LPQ command:" msgstr "Comando LPQ:" #: standalone/draksambashare:619 #, c-format msgid "Printing:" msgstr "Imprimir:" #: standalone/draksambashare:635 #, c-format msgid "create mode should be numeric. ie: 0755." msgstr "o modo criar deve ser numérico. ie: 0755." #: standalone/draksambashare:697 #, c-format msgid "DrakSamba entry" msgstr "Entrada DrakSamba" #: standalone/draksambashare:702 #, c-format msgid "Please add or select a Samba share to be able to modify it." msgstr "" "Por favor adicione ou seleccione uma partilha Samba para a poder modificar." #: standalone/draksambashare:725 #, c-format msgid "Samba user access" msgstr "Acesso de utilizador Samba" #: standalone/draksambashare:733 #, c-format msgid "Mask options" msgstr "Opções de máscara" #: standalone/draksambashare:747 #, c-format msgid "Display options" msgstr "Opções do ecrã" #: standalone/draksambashare:769 #, c-format msgid "Samba share directory" msgstr "Directório de partilha Samba" #: standalone/draksambashare:772 #, c-format msgid "Share name:" msgstr "Nome da partilha:" #: standalone/draksambashare:778 #, c-format msgid "Public:" msgstr "Público:" #: standalone/draksambashare:802 #, c-format msgid "" "Create mask, create mode and directory mask should be numeric. ie: 0755." msgstr "" "A máscara, o modo criar e a máscara do directório deve ser numérica. ie: " "0755." #: standalone/draksambashare:809 #, c-format msgid "Please create this Samba user: %s" msgstr "Por favor crie este utilizador Samba: %s" #: standalone/draksambashare:932 #, c-format msgid "User information" msgstr "Informação do utilizador" #: standalone/draksambashare:934 #, c-format msgid "User name:" msgstr "Nome do utilizador:" #: standalone/draksambashare:935 standalone/harddrake2:601 #, c-format msgid "Password:" msgstr "Senha:" #: standalone/draksambashare:1135 #, c-format msgid "Failed to add Samba share." msgstr "Falha ao adicionar a partilha Samba." #: standalone/draksambashare:1144 #, c-format msgid "Failed to Modify Samba share." msgstr "Falha ao modificar a partilha Samba." #: standalone/draksambashare:1153 #, c-format msgid "Failed to remove a Samba share." msgstr "Falha ao remover a partilha Samba." #: standalone/draksambashare:1160 #, c-format msgid "File share" msgstr "Patilha de ficheiros" #: standalone/draksambashare:1168 #, c-format msgid "Add printers" msgstr "Adicionar impressoras" #: standalone/draksambashare:1174 #, c-format msgid "Failed to add printers." msgstr "Falha ao adicionar impressoras." #: standalone/draksambashare:1183 #, c-format msgid "Failed to Modify." msgstr "Falha ao modificar." #: standalone/draksambashare:1192 #, c-format msgid "Failed to remove." msgstr "Falha ao remover." #: standalone/draksambashare:1199 #, c-format msgid "Printers" msgstr "Impressoras" #: standalone/draksambashare:1207 #, c-format msgid "Change password" msgstr "Mudar senha" #: standalone/draksambashare:1212 #, c-format msgid "Failed to change user password." msgstr "Falha ao mudar senha do utilizador." #: standalone/draksambashare:1220 #, c-format msgid "Failed to add user." msgstr "Falha ao adicionar utilizador." #: standalone/draksambashare:1223 #, c-format msgid "Delete user" msgstr "Apagar utilizador" #: standalone/draksambashare:1232 #, c-format msgid "Failed to delete user." msgstr "Falha ao apagar utilizador." #: standalone/draksambashare:1244 #, c-format msgid "Samba Users" msgstr "Utilizadores Samba" #: standalone/draksambashare:1253 #, c-format msgid "DrakSamba manage Samba shares" msgstr "O DraSamba gere as partilhas Samba" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "TODOS" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "LOCAL" #: standalone/draksec:51 #, c-format msgid "NONE" msgstr "NENHUM" #: standalone/draksec:53 standalone/net_applet:480 #, c-format msgid "Ignore" msgstr "Ignorar" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:103 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "Aqui, pode configurar o nível de segurança e o administrador da sua " "máquina.\n" "\n" "\n" "O Administrador de Segurança é aquele que irá " "receber os alertas de segurança\n" "se a opção 'Alerta de Segurança' é definida. " "Pode ser um nome\n" "de utilizador ou um endereço de correio electrónico.\n" "\n" "\n" "O menu 'Nível de Segurança' permite-lhe " "escolher um dos seis níveis de segurança\n" "pré-configurados fornecidos com o msec. Esta extensão de níveis vão desde\n" "segurança 'pobre' e de fácil uso, até à " "configuração 'paranoica'\n" "apropriada a aplicações se servidor de grande sensibilidade:\n" "\n" "\n" "Pobre: Este é um nível de segurança " "completamente inseguro\n" "mas de fácil uso. Deve ser apenas usado por máquinas não conectadas a\n" "qualquer rede e que não estejam acessíveis a toda a gente.\n" "\n" "\n" "Padrão: Este é o nível de segurança " "padrão recomendado\n" "para um computador que seja usado para conectar à internet como cliente\n" "\n" "Alta: Há já algumas restrições,\n" "e mais verificações automáticas são executadas todas as noites.\n" "\n" "\n" "Superior: A segurança é agora\n" "suficiente para o uso\n" "do sistema como um servidor que pode aceitar conexões de vários clientes.\n" "Se a sua máquina é apenas um cliente na Internet, deve escolher um nível\n" "mais baixo.\n" "\n" "\n" "Paranoica: Este é similar ao nível " "anterior, mas o sistema\n" "é inteiramente fechado e as opções de segurança estão ao seu máximo." #: standalone/draksec:156 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Descrição dos campos:\n" "\n" #: standalone/draksec:170 #, c-format msgid "(default value: %s)" msgstr "(valor predefinido: %s)" #: standalone/draksec:212 #, c-format msgid "Security Level:" msgstr "Nível de Segurança:" #: standalone/draksec:219 #, c-format msgid "Security Administrator:" msgstr "Administrador de Segurança:" #: standalone/draksec:221 #, c-format msgid "Basic options" msgstr "Opções básicas" #: standalone/draksec:235 #, c-format msgid "Network Options" msgstr "Opções de Rede" #: standalone/draksec:235 #, c-format msgid "System Options" msgstr "Opções do Sistema" #: standalone/draksec:270 #, c-format msgid "Periodic Checks" msgstr "Verificações Periódicas" #: standalone/draksec:300 #, c-format msgid "Please wait, setting security level..." msgstr "Por favor aguarde, a definir o nível de segurança..." #: standalone/draksec:306 #, c-format msgid "Please wait, setting security options..." msgstr "Por favor aguarde, a definir as opções de segurança..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Nenhuma Placa de Som detectada!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" "Nenhuma placa de som foi detectada na sua máquina. Por favor verifique se a " "placa de som suportada pelo Linux está bem ligada.\n" "\n" "\n" "Pode visitar a nossa base de dados de hardware em:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Nota: se tem uma placa som ISA PnP, irá ter de usar o programa alsaconf ou " "sndconfig. Basta digitar \"alsaconf\" ou \"sndconfig\" numa consola." #: standalone/draksplash:30 #, c-format msgid "x coordinate of text box" msgstr "coordenação x da caixa de texto" #: standalone/draksplash:31 #, c-format msgid "y coordinate of text box" msgstr "coordenação y da caixa de texto" #: standalone/draksplash:32 #, c-format msgid "text box width" msgstr "comprimento da caixa de texto" #: standalone/draksplash:33 #, c-format msgid "text box height" msgstr "altura da caixa de texto" #: standalone/draksplash:34 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "a coordenada x da barra de progresso\n" "do seu canto superior esquerdo" #: standalone/draksplash:35 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "a coordenada y da barra de progresso\n" "do seu canto superior esquerdo" #: standalone/draksplash:36 #, c-format msgid "the width of the progress bar" msgstr "a largura da barra de progresso" #: standalone/draksplash:37 #, c-format msgid "the height of the progress bar" msgstr "a altura da barra de progresso" #: standalone/draksplash:38 #, c-format msgid "x coordinate of the text" msgstr "coordenada x do texto" #: standalone/draksplash:39 #, c-format msgid "y coordinate of the text" msgstr "coordenada y do texto" #: standalone/draksplash:40 #, c-format msgid "text box transparency" msgstr "transparência da caixa de texto" #: standalone/draksplash:41 #, c-format msgid "progress box transparency" msgstr "transparência da caixa de progresso" #: standalone/draksplash:42 #, c-format msgid "text size" msgstr "tamanho do texto" #: standalone/draksplash:59 #, c-format msgid "Choose progress bar color 1" msgstr "Escolha a cor 1 da barra de progresso" #: standalone/draksplash:60 #, c-format msgid "Choose progress bar color 2" msgstr "Escolha a cor 2 da barra de progresso" #: standalone/draksplash:61 #, c-format msgid "Choose progress bar background" msgstr "Escolha o fundo da barra de progresso" #: standalone/draksplash:62 #, c-format msgid "Gradient type" msgstr "Tipo de gradiente" #: standalone/draksplash:63 #, c-format msgid "Choose text color" msgstr "Escolha a cor do texto" #: standalone/draksplash:65 standalone/draksplash:72 #, c-format msgid "Choose picture" msgstr "Escolha a imagem" #: standalone/draksplash:66 #, c-format msgid "Silent bootsplash" msgstr "Ecrã de arranque silencioso" #: standalone/draksplash:69 #, c-format msgid "Choose text zone color" msgstr "Escolha a cor da zona do texto" #: standalone/draksplash:70 #, c-format msgid "Text color" msgstr "Cor do texto" #: standalone/draksplash:71 #, c-format msgid "Background color" msgstr "Cor de fundo" #: standalone/draksplash:73 #, c-format msgid "Verbose bootsplash" msgstr "Ecrã de arranque verboso" #: standalone/draksplash:75 #, c-format msgid "Display logo on Console" msgstr "Mostrar logo na consola" #: standalone/draksplash:78 #, c-format msgid "Console bootsplash" msgstr "Consola do ecrã de arranque" #: standalone/draksplash:84 #, c-format msgid "Theme name" msgstr "Nome do tema" #: standalone/draksplash:87 #, c-format msgid "final resolution" msgstr "resolução final" #: standalone/draksplash:92 #, c-format msgid "Save theme" msgstr "Gravar tema" #: standalone/draksplash:153 #, c-format msgid "saving Bootsplash theme..." msgstr "a gravar o tema Bootsplash..." #: standalone/draksplash:162 #, c-format msgid "Unable to load image file %s" msgstr "Não é possível carregar a imagem %s" #: standalone/draksplash:173 #, c-format msgid "choose image" msgstr "escolher imagem" #: standalone/draksplash:188 #, c-format msgid "Color selection" msgstr "Selecção da cor" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "Conectado através de uma porta série ou de um cabo usb" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "Adicionar um dispositivo UPS" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "Bem-vindo ao utilitário de configuração UPS.\n" "\n" "Aqui, irá pode adicionar um novo UPS ao seu sistema.\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" "Vamos adicionar um dispositivo UPS.\n" "\n" "Deseja que os dispositivos UPS conectados a esta máquina sejam auto " "detectados ou sejam manualmente seleccionados ?" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "Autodetecção" #: standalone/drakups:101 standalone/harddrake2:376 #, c-format msgid "Detection in progress" msgstr "Detecção em progresso" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "O assistente adicionou com sucesso os seguintes dispositivos UPS:" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "Nenhum dispositivo UPS novo encontrado" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "Configuração do controlador UPS" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "Por favor escolha o seu modelo UPS" #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "Fabricante / Modelo:" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" "Estamos a configurar o UPS \"%s\" a partir de \"%s\".\n" "Por favor preencha o seu nome, controlador e porta." #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Nome:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "O nome do seu ups" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "O controlador que gere o seu UPS" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Porta:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "A porta onde está conectado o seu ups" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "O assistente configurou com sucesso o novo dispositivo UPS \"%s\"." #: standalone/drakups:250 #, c-format msgid "UPS devices" msgstr "Dispositivos UPS" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:85 standalone/harddrake2:111 #: standalone/harddrake2:118 #, c-format msgid "Name" msgstr "Nome" #: standalone/drakups:269 #, c-format msgid "UPS users" msgstr "Utilizadores UPS" #: standalone/drakups:285 #, c-format msgid "Access Control Lists" msgstr "Listas de Controlo de Acesso" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "Mascara IP" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "Regras" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "Acção" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "Nível" #: standalone/drakups:299 #, c-format msgid "ACL name" msgstr "Nome ACL" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "Bem-vindo às ferramentas de configuração UPS" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "A conexão VPN está agora activada." #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração da conexão VPN já foi feita.\n" "\n" "Está actualmente activa.\n" "\n" "O que deseja fazer?" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "desactivar" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "reconfigurar" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 #: standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "demitir" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "A desactivar VPN..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "A conexão VPN está agora desactivada." #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "Conexão VPN actualmente desactivada" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "A configuração da conexão VPN já foi feita.\n" "\n" "Está actualmente desactivada.\n" "\n" "O que deseja fazer?" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "activar" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "A activar VPN..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "A conexão VPN está agora activada." #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "Simples configuração VPN" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" "Está prestes a configurar o seu computador para usar uma conexão VPN.\n" "\n" "Com esta opção, computadores na sua rede privada local e computadores\n" "em algumas redes privadas remotas, podem partilhar recursos, através das\n" "suas respectivas firewalls, através da Internet, de uma maneira segura. \n" "\n" "A comunicação através da Internet é encriptada. Os computadores locais\n" "e remotos aparecem como se estivessem na mesma rede.\n" "\n" "Certifique-se que configurou o seu acesso à Rede/Internet usando o\n" "drakconnect antes de prosseguir." #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" "Conexão VPN.\n" "\n" "Este programa é baseado nos seguintes projectos:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - os docs e as man pages que acompanham o pacote %s\n" "\n" "Por favor leia, PELO MENOS, os documentos ipsec-howto\n" "antes de prosseguir." #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "Módulo kernel." #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" "O kernel necessita ter suporte ipsec.\n" "\n" "Está a correr uma versão %s do kernel.\n" "\n" "Este kernel tem suporte '%s'." #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "Problemas ao instalar o pacote %s" #: standalone/drakvpn:278 #, c-format msgid "Security Policies" msgstr "Políticas de Segurança" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "Servidor IKE racoon" #: standalone/drakvpn:281 standalone/drakvpn:292 #, c-format msgid "Configuration file" msgstr "Ficheiro de configuração" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" "Passo de configuração !\n" "\n" "Precisa definir as Políticas de Segurança e depois\n" "configurar o servidor (IKE) de troca de chave automática.\n" "O servidor KAME IKE que estamos a usar chama-se 'racoon'.\n" "\n" "O que deseja configurar ?\n" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" "Próximo, iremos configurar o ficheiro %s.\n" "\n" "\n" "Simplesmente clique em Seguinte.\n" #: standalone/drakvpn:311 standalone/drakvpn:671 #, c-format msgid "%s entries" msgstr "%s entradas" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" "O conteúdo do ficheiro %s\n" "está dividido em secções.\n" "\n" "Agora pode:\n" "\n" " - ver, adicionar, editar, ou remover secções, e depois\n" " - submeter as alterações\n" "\n" "O que deseja fazer?\n" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "Mostrar" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Commit" msgstr "Submeter" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 #: standalone/drakvpn:699 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Mostrar configuração" #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" "O ficheiro %s não existe.\n" "\n" "Esta deve ser uma configuração nova.\n" "\n" "Terá de retroceder e escolher 'adicionar'.\n" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "entradas ipsec.conf" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" "O ficheiro %s contém secções diferentes.\n" "\n" "Aqui está o seu esqueleto:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "Agora pode adicionar uma destas secções.\n" "\n" "Escolha a secção que deseja adicionar.\n" #: standalone/drakvpn:362 #, c-format msgid "config setup" msgstr "config setup" #: standalone/drakvpn:362 #, c-format msgid "conn %default" msgstr "conn %default" #: standalone/drakvpn:362 #, c-format msgid "normal conn" msgstr "normal conn" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, c-format msgid "Exists!" msgstr "Existe!" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" "Uma secção com este nome já existe.\n" "Os nomes de secção têm que ser únicos.\n" "\n" "Terá de retroceder e adicionar outra secção\n" "ou mudar o seu nome.\n" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" "Esta secção tem de estar no topo do\n" "ficheiro %s.\n" "\n" "Certifique-se que todas as outras secções seguem esta\n" "secção 'config setup'.\n" "\n" "Escolha continuar ou retroceder quando estiver pronto.\n" #: standalone/drakvpn:391 #, c-format msgid "interfaces" msgstr "interfaces" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "klipsdebug" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "plutodebug" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "plutoload" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "plutostart" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "uniqueids" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" "Esta é a primeira secção após a 'config\n" "setup'.\n" "\n" "Aqui pode definir as preferências padrão. \n" "Todas as outras secções irão seguir esta.\n" "As definições à esquerda são opcionais. Se não as\n" "definir aqui, globalmente, poderá defini-las em cada\n" "secção.\n" #: standalone/drakvpn:437 #, c-format msgid "PFS" msgstr "PFS" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "keyingtries" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "compress" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "disablearrivalcheck" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "esquerda" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "leftcert" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "leftrsasigkey" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "leftsubnet" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "leftnexthop" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" "O ficheiro %s tem varias secções, ou conexões.\n" "\n" "Pode agora adicionar uma nova secção.\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:477 #, c-format msgid "section name" msgstr "nome da secção" #: standalone/drakvpn:478 #, c-format msgid "authby" msgstr "authby" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "auto" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "direita" #: standalone/drakvpn:486 #, c-format msgid "rightcert" msgstr "rightcert" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "rightrsasigkey" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "rightsubnet" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "rightnexthop" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" "Uma secção com este nome já existe.\n" "Os nomes das secções têm de ser únicos.\n" "\n" "Terá de retroceder e adicionar outra secção\n" "ou mudar o nome da secção.\n" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Adicionar uma Política de Segurança.\n" "\n" "Pode agora adicionar uma Política de Segurança.\n" "\n" "Escolha continuar quanto estiver pronto para escrever os dados.\n" #: standalone/drakvpn:562 standalone/drakvpn:812 #, c-format msgid "Edit section" msgstr "Editar secção" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" "O seu ficheiro %s tem várias secções ou conexões.\n" "\n" "Pode escolher aqui abaixo a que quer editar\n" "e depois clique em seguinte.\n" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 #: standalone/drakvpn:863 #, c-format msgid "Section names" msgstr "Nomes das secções" #: standalone/drakvpn:576 #, c-format msgid "Can not edit!" msgstr "Não consegue editar !" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" "Não pode editar esta secção.\n" "\n" "Esta secção é obrigatória para Freswan 2.X.\n" "Uma tem que especificar a versão 2.0 no topo\n" "do ficheiro %s, e eventualmente, desactivar ou\n" "activar a encriptação adequada.\n" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "O seu ficheiro %s tem várias secções.\n" "\n" "Pode agora editar as entradas da secção config setup.\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "O seu ficheiro %s tem várias secções.\n" "\n" "Pode agora editar as entradas da secção config setup.\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "O ficheiro %s tem várias secções ou conexões.\n" "\n" "Pode agora editar as entradas normais da secção.\n" "\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Editar uma Política de Segurança.\n" "\n" "Pode agora adicionar uma Política de Segurança.\n" "\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:642 standalone/drakvpn:859 #, c-format msgid "Remove section" msgstr "Remover secção" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" "O seu ficheiro %s tem varias secções ou conexões.\n" "\n" "Pode agora escolher em baixo aquela que quer remover\n" "e depois clique em seguinte.\n" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" "O ficheiro de configuração racoon.conf.\n" "\n" "O conteúdo deste ficheiro está dividido em secções.\n" "Pode agora:\n" " - exibir \t\t (exibir o conteúdo do ficheiro)\n" " - adicionar\t\t\t (adicionar uma secção)\n" " - editar \t\t\t (modificar os parâmetros de uma secção)\n" " - remover \t\t (remover uma secção existente)\n" " - submeter \t\t (escrever as alterações o ficheiro real)" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" "O ficheiro %s não existe\n" "\n" "Esta deve ser uma nova configuração.\n" "\n" "Terá de retroceder e escolher configurar.\n" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "entradas racoonf.conf" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" "O passo 'adicionar' secções.\n" "\n" "Aqui em baixo está o esqueleto do ficheiro racoon.conf:\n" "\t'endereço'\n" "\t'remoto'\n" "\t'sainfo' \n" "\n" "Escolha a secção que deseja adicionar.\n" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "path" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "remoto" #: standalone/drakvpn:721 #, c-format msgid "sainfo" msgstr "sainfo" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" "O passo 'adicionar secção de endereço'.\n" "\n" "As secções path têm que estar no topo do seu ficheiro racoon.conf.\n" "\n" "Ponha o seu rato sobre a entrada do certificado para obter ajuda online." #: standalone/drakvpn:732 #, c-format msgid "path type" msgstr "tipo de path" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" "path include path: especifica um caminho para incluir\n" "um ficheiro. Ver File Inclusion.\n" "\tExemplo: path include '/etc/racoon'\n" "\n" "path pre_shared_key file : especifica um ficheiro contendo\n" "uma chave(s) pré-partilhada(s) para vários ID(s). Ver Pre-shared key File.\n" "\tExemplo: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: o racoon(8) irá procurar este directório\n" "se um certificado ou um pedido de certificado for recebido.\n" "\tExemplo: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: incluir ficheiro \n" "outros ficheiros de configuração podem ser incluidos.\n" "\tExemplo: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: O ficheiro de chave pré-partilhada define um par\n" "do identificador e da chave secreta partilhada que são usados no\n" "método de autenticação da chave pré-partilhada na fase 1." #: standalone/drakvpn:756 standalone/drakvpn:849 #, c-format msgid "real file" msgstr "ficheiro real" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "Certifique-se que já possui as secções path\n" "no topo de seu ficheiro racoon.conf.\n" "\n" "Pode escolher agora as definições remotas.\n" "Escolha continuar ou retroceder quando estiver pronto.\n" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "Certifique-se de que já possui as secções path\n" "no topo de seu ficheiro %s.\n" "\n" "Pode escolher agora as definições sainfo.\n" "Escolha continuar ou retroceder quando estiver pronto.\n" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" "O seu ficheiro %s tem varias secções ou conexões.\n" "\n" "Pode escolher aqui da lista abaixo aquela que quer\n" "editar e clique em seguinte.\n" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "O seu ficheiro %s contém várias secções.\n" "\n" "\n" "Pode agora editar as entradas da secção remota.\n" "\n" "Escolha continuar quando estiver pronto para escrever os dados.\n" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" "O ficheiro %s contém várias secções.\n" "\n" "\n" "Pode agora editar as entradas da secção sainfo.\n" "\n" "Escolha continuar quando estiver pronto para escrever os dados." #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" "Esta secção tem de estar no topo do seu\n" "ficheiro %s.\n" "\n" "Certifique-se que todas as outras secções\n" "seguem estas secções path.\n" "\n" "Pode agora editar as entradas de endereço.\n" "\n" "Escolha continuar ou retroceder quando acabar.\n" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "path_type" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" "Foi tudo configurado.\n" "\n" "Pode agora partilhar recursos através da Internet,\n" "de uma maneira segura, utilizando uma conexão VPN.\n" "\n" "Deve certificar-se que a secção tunnels shorewall\n" "está configurada." #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "Sainfo endereço de origem" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" "sainfo (id_origem id_destino | anonymous) { declarações }\n" "define os parâmetros da fase2 do IKE\n" "(estabelecimento IPsec-SA).\n" "\n" "source_id e id_destino são construídos como:\n" "\n" "\taddress address [/ prefixo] [[porta]] ul_proto\n" "\n" "Exemplos: \n" "\n" "sainfo anonymous (aceita todas as conexões)\n" "\tdeixe esta entrada em branco se desejar anónimo\n" "\n" "sainfo address 203.178.141.209 qualquer endereço 203.178.141.218\n" "\tqualquer 203.178.141.209 é o endereço de origem\n" "\n" "sainfo address 172.16.1.0/24 qualquer endereço 172.16.2.0/24\n" "\tqualquer 172.16.1.0/24 é o endereço de origem" #: standalone/drakvpn:927 #, c-format msgid "Sainfo source protocol" msgstr "Sainfo protocolo de origem" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" "sainfo (id_origem id_destino | anonymous) { declarações }\n" "define os parâmetros da fase2 do IKE\n" "(estabelecimento IPsec-SA).\n" "\n" "id_origem e id_destino são construídos como:\n" "\n" "\taddress address [/ prefixo] [[porta]] ul_proto\n" "\n" "Exemplos: \n" "\n" "sainfo anonymous (aceita todas as conexões de qualquer lado)\n" "\tdeixe esta entrada em branco se desejar anónimo\n" "\n" "sainfo address 203.178.141.209 qualquer endereço 203.178.141.218\n" "\tqualquer primeiro 'any' permite qualquer protocolo para a origem" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "Sainfo Endereço de destino" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" "sainfo (id_origem id_destino | anonymous) { declarações }\n" "define os parâmetros da fase2 do IKE\n" "(estabelecimento IPsec-SA).\n" "\n" "id_origem e id_destino são construidos assim:\n" "\n" "\taddress address [/ prefixo] [[porta]] ul_proto\n" "\n" "Exemplos: \n" "\n" "sainfo anonymous (aceita todas as conexões)\n" "\tdeixe esta entrada em branco se desejar anonimo\n" "\n" "sainfo address 203.178.141.209 qualquer endereço 203.178.141.218\n" "\tqualquer 203.178.141.218 é o endereço de destino\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24\n" "\tqualquer 172.16.2.0/24 é o endereço de destino" #: standalone/drakvpn:960 #, c-format msgid "Sainfo destination protocol" msgstr "Sainfo protocolo de destino" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" "sainfo (id_origem id_destino | anonymous) { declarações }\n" "define os parâmetros da fase2 do IKE\n" "(estabelecimento IPsec-SA).\n" "\n" "id_origem e id_destino são construídos assim:\n" "\n" "\taddress address [/ prefixo] [[porta]] ul_proto\n" "\n" "Exemplos: \n" "\n" "sainfo anonymous (aceita todas as conexões)\n" "\tdeixe esta entrada em branco se desejar anónimo\n" "\n" "sainfo address 203.178.141.209 qualquer endereço 203.178.141.218\n" "\tqualquer último 'any' permite qualquer protocolo para o destino" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "Grupo PFS" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" "define o grupo de exponenciações Diffie-Hellman.\n" "Se não requerer PFS, então pode omitir esta directiva.\n" "Qualquer proposta será aceite se não especificar uma.\n" "O grupo é um dos seguintes: modp768, modp1024, modp1536.\n" "Ou pode definir 1, 2, ou 5 como o número de grupo DH." #: standalone/drakvpn:982 #, c-format msgid "Lifetime number" msgstr "Número de tempo-de-vida" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" "define um tempo de vida de um certa tempo que será\n" "proposto nas negociações da fase 1. Qualquer proposta\n" "será aceite, e o(s) atributo(s) não serão propostos ao peer\n" "se não os especificar. Os atributos podem ser especificados\n" "individualmente em cada proposta.\n" "\n" "Exemplos: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "Então, aqui, os números do tempo de vida são 1, 1, 30, 30, 60 e 12.\n" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "Unidade de tempo de vida" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" "define um tempo-de-vida de um certo tempo que será proposto\n" "na fase 1 das negociações. Qualquer proposta será aceite, e\n" "o(s) atributo(s) não serão propostos ao peer se não os especificar.\n" "Os atributos podem ser especificados individualmente\n" "em cada proposta.\n" "\n" "Exemplos: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "Então, aqui, as unidades do tempo de vida são 'min', 'min', 'seg', 'seg', " "'seg' e 'hora'.\n" #: standalone/drakvpn:1019 #, c-format msgid "Authentication algorithm" msgstr "Algoritmo de autenticação" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "Algorítmo de compressão" #: standalone/drakvpn:1022 #, c-format msgid "deflate" msgstr "deflate" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "Remoto" #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" "remoto (endereço | anonimo) [[porta]] { declarações }\n" "específica os parâmetros para a fase 1 do IKE para cada nó remoto.\n" "A porta predefinida é a 500. Se especificado anonimo, as declarações\n" "aplicam-se a todos os 'peers' que não correspondam a qualquer\n" "outra directiva remota.\n" "\n" "Exemplos: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" #: standalone/drakvpn:1038 #, c-format msgid "Exchange mode" msgstr "Modo de troca" #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" "define o modo de troca para a fase 1 quando o racoon é o iniciador.\n" "Também define o modo de troca aceite quando o racoon é o que\n" "responde. Mais do que um modo pode ser especificado ao separá-\n" "-los com uma vírgula. Todos os modos são aceitáveis. O primeiro\n" "modo de troca é o que o racoon usa quando é o iniciador.\n" #: standalone/drakvpn:1046 #, c-format msgid "Generate policy" msgstr "Gerar política" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "desligado" #: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "on" msgstr "ligado" #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" "Esta directiva é para o que responde. Então deve definir o\n" "modo passivo de modo que o racoon(8) se torne no que\n" "responde. Se o que responde não tem qualquer política em\n" "SPD durante negociação da fase 2, e a directiva está definida\n" "para activa, então o racoon(8) irá escolher a primeira proposta\n" "ta no payload SA do iniciador, e gerar entradas de politica da\n" "proposta. É útil negociar com o cliente que está dinamicamente\n" "te alocado com um endereço IP. Note-se que as politicas\n" "inapropriadas podem ser instaladas no que envia respostas SPD\n" "pelo iniciador. Para que outra comunicação possa falhar se tais\n" "politicas instaladas devido a algum desencontro de politicas\n" "do iniciador e do que responde. Esta directiva é ignorada no\n" "caso do iniciador. O valor predefinido está desligado." #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "Passivo" #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" "Se não quiser iniciar a negociação, defina isto\n" "para ligado. O valor padrã é desligado. É útil\n" "para um servidor." #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "Tipo de certificado" #: standalone/drakvpn:1069 #, c-format msgid "My certfile" msgstr "O meu ficheiro de certificação" #: standalone/drakvpn:1070 #, c-format msgid "Name of the certificate" msgstr "Nome do certificado" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "A minha chave privada" #: standalone/drakvpn:1072 #, c-format msgid "Name of the private key" msgstr "Nome da chave privada" #: standalone/drakvpn:1073 #, c-format msgid "Peers certfile" msgstr "Ficheiro de certificação dos peers" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "Nome do certificado dos peers" #: standalone/drakvpn:1075 #, c-format msgid "Verify cert" msgstr "Verificar certificado" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" "Se não quiser verificar o certificado dos 'peers' por alguma\n" "razão, defina isto para desligado. O predefinido está ligado." #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "O meu identificador" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" "especifica o identificador enviado para o endereço remoto e\n" "o tipo a usar na fase 1 da negociação. endereço, FQDN,\n" "user_fqdn, keyid e asn1dn podem ser usados como um idtype.\n" "eles são usados como:\n" "\tmy_identifier address [address];\n" "\t\to tipo é o endereço IP. Este é o tipo\n" "\t\tpredefinido se não quiser especificar um identificador para usar.\n" "\tmy_identifier user_fqdn string;\n" "\t\to tipo é um USER_FQDN (nome do domínio de um utilizador\n" "\t\tcompletamente qualificado).\n" "\tmy_identifier FQDN string;\n" "\t\to tipo é um FQDN (nome de domínio qualificado)\n" "\tmy_identifier keyid file;\n" "\t\to tipo é um KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\to tipo é um ASN.1 nome distinguido. Se a\n" "\t\tstring é omitida, o racoon(8) irá obter o DN do\n" "\t\tcampo do Assunto no certificado.\n" "\n" "Exemplos: \n" "\n" "my_identifier user_fqdn \"meuemail@meudominio.com\"" #: standalone/drakvpn:1100 #, c-format msgid "Peers identifier" msgstr "Identificador dos peers" #: standalone/drakvpn:1101 #, c-format msgid "Proposal" msgstr "Proposta" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" "especifique o algorítmo de encriptação usado para a\n" "fase 1 da negociação. Esta directiva tem de ser definida.\n" "o algorítmo é um dos seguintes: \n" "\n" "DES, 3DES, blowfish, cast128 para oakley.\n" "\n" "Para outras transformações, esta declaração não deve\n" "ser usada." #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "Algorítmo hash" #: standalone/drakvpn:1112 #, c-format msgid "DH group" msgstr "Grupo DH" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "Comando" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "Extensão do IP de origem" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "Exntensão do IP de destino" #: standalone/drakvpn:1122 #, c-format msgid "Upper-layer protocol" msgstr "Protocolo da camada superior (Upper-layer)" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, c-format msgid "any" msgstr "qualquer" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "Flag" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "Direcção" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "Política do IPsec" #: standalone/drakvpn:1126 #, c-format msgid "ipsec" msgstr "ipsec" #: standalone/drakvpn:1126 #, c-format msgid "discard" msgstr "descartar" #: standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "Modo" #: standalone/drakvpn:1129 #, c-format msgid "tunnel" msgstr "túnel" #: standalone/drakvpn:1129 #, c-format msgid "transport" msgstr "transporte" #: standalone/drakvpn:1131 #, c-format msgid "Source/destination" msgstr "Origem/destino" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "requer" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "predefinido" #: standalone/drakvpn:1132 #, c-format msgid "use" msgstr "uso" #: standalone/drakvpn:1132 #, c-format msgid "unique" msgstr "único" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "USA (transmissão)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "USA (cabo)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "USA (cabo-hrc)" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Canada (cabo)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "Japão (transmissão)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "Japão (cabo)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "China (transmissão)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "Europa Oeste" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Europa do Leste" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "França [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "Nova-Zelândia" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "Cabo de TV Optus Australiano" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Por favor,\n" "digite a norma da sua tv e país" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "Norma TV :" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "Área :" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "Detecção de canais de TV em progresso..." #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "A detectar canais de TV" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Houve um erro enquanto a detectar por canais de TV" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "Tenha um bom dia!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Agora, pode usar xawtv (sob X Window!) !\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "Nenhuma placa TV detectada!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" "Nenhuma placa TV foi detectada na sua máquina. Por favor verifique que a " "placa de Video/TV suportada pelo Linux está bem conectada.\n" "\n" "\n" "Pode visitar a nossa base de dados de hardware em :\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" #: standalone/finish-install:38 standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "Por favor, escolha a disposição do seu teclado." #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "Controladores alternativos" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "a lista dos controladores alternativos para esta placa de som" #: standalone/harddrake2:29 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "este é o bus físico no qual o disposito está conectado (ex: PCI, USB, ...)" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr "Identificação do Bus" #: standalone/harddrake2:32 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- dispositivos PCI e USB : isto lista o vendedor, o dispositivo, subvendedor " "e os subdispositivos ids PCI/USB" #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- dispositivos pci : isto dá o slot PCI, dispositivo e função desta placa\n" "- dispositivos eide : o dispositivo ou é slave ou master\n" "- dispositivos scsi : o bus scsi o os ids do dispositivo scsi" #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "Capacidade do disco" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" "capacidades especiais do controlador (capacidade de gravar e/ou suporte DVD)" #: standalone/harddrake2:39 #, c-format msgid "this field describes the device" msgstr "este campo descreve o dispositivo" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "Antigo ficheiro do dispositivo" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "nome de dispositivo estático antigo usado no pacote dev" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "Novo dispositivo devfs" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "novo nome dinâmico do dispositivo gerado pelo kernel devfs" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "Módulo" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "o módulo do kernel GNU/Linux que gere o dispositivo" #: standalone/harddrake2:47 #, c-format msgid "Extended partitions" msgstr "Partições extendidas" #: standalone/harddrake2:47 #, c-format msgid "the number of extended partitions" msgstr "o número de partições extendidas" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "Geometria" #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "Cilindros/cabeças/sectores da geometria do disco" #: standalone/harddrake2:49 #, c-format msgid "Disk controller" msgstr "Controlador do Disco" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "o controlador do disco na parte do endereço" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "classe do dispositivo hardware" #: standalone/harddrake2:51 standalone/harddrake2:83 #: standalone/printerdrake:224 #, c-format msgid "Model" msgstr "Modelo" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "modelo do disco rígido" #: standalone/harddrake2:52 #, c-format msgid "network printer port" msgstr "porta da impressora na rede" #: standalone/harddrake2:53 #, c-format msgid "Primary partitions" msgstr "Partições primárias" #: standalone/harddrake2:53 #, c-format msgid "the number of the primary partitions" msgstr "o número de partições primárias" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "o nome do vendedor do dispositivo" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "Bus PCI #" #: standalone/harddrake2:55 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "o bus PCI onde o dispositivo está ligado" #: standalone/harddrake2:56 #, c-format msgid "PCI device #" msgstr "Dispositivo PCI #" #: standalone/harddrake2:56 #, c-format msgid "PCI device number" msgstr "Número do dispositivo PCI" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "Função PCI #" #: standalone/harddrake2:57 #, c-format msgid "PCI function number" msgstr "Número da função PCI" #: standalone/harddrake2:58 #, c-format msgid "Vendor ID" msgstr "ID do vendedor" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "este é o identificador numerico padrão do vendedor" #: standalone/harddrake2:59 #, c-format msgid "Device ID" msgstr "ID do dispositivo" #: standalone/harddrake2:59 #, c-format msgid "this is the numerical identifier of the device" msgstr "este é o identificador numerico do dispositivo" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "ID do sub-vendedor" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "este é o menor identificador numerico do vendedor" #: standalone/harddrake2:61 #, c-format msgid "Sub device ID" msgstr "ID do sub dispositivo" #: standalone/harddrake2:61 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "este é o menor identificador numerico do dispositivo" #: standalone/harddrake2:62 #, c-format msgid "Device USB ID" msgstr "ID do dispositivo USB" #: standalone/harddrake2:62 #, c-format msgid ".." msgstr ".." #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:66 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "O kernel GNU/Linux precisa de executar um ciclo de cálculos na altura do " "arranque para inicializar o contador de tempo. Os seus resultados são " "gravados como bogomips como uma maneira de \"benchmark\" (referência " "comparativa) do processador (cpu)." #: standalone/harddrake2:67 #, c-format msgid "Cache size" msgstr "Tamanho da cache" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "tamanho da (segundo nível) cache do cpu" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "Erro do coma" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "se este cpu tem o erro Coma dos Cyrix 6x86" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "Família cpuid" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "Família do cpu (ex: 6 para a classe i686)" #: standalone/harddrake2:72 #, c-format msgid "Cpuid level" msgstr "Nível do cpuid" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "o nível de informação que pode ser obtido através da instrução cpuid" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "Frequência (MHz)" #: standalone/harddrake2:73 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "a frequência do cpu em MHz (Megahertz que na primeira aproximação pode ser " "assimilada grosseiramente para o número de instruções que o cpu é capaz de " "executar por segundo)" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "Flags" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "flags do processador comunicadas pelo kernel" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "Erro Fdiv" #: standalone/harddrake2:76 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Os primeiros chips Intel Pentium fabricados têm um erro no seu processador " "'floating point' que não permite a precisão esperada quando a executar uma " "'Floating point DIVision (FDIV)'" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "FPU está presente" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "sim significa que o processador tem um coprocessador aritmético" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Se o FPU tem um vector irq" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" "sim significa que o coprocessador aritmético tem um vector de excepção " "anexado" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "Erro F00f" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "os primeiros Pentium não eram fiáveis e bloqueavam quando descodificavam o " "bytecode F00F" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "Erro halt" #: standalone/harddrake2:81 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Alguns dos primeiros chips i486DX-100 não podem voltar ao modo operacional " "de maneira segura depois de ter usado a instrução \"halt\"." #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "sub geração do cpu" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "geração do processador (ex: 8 para os Pentium III, ...)" #: standalone/harddrake2:84 #, c-format msgid "Model name" msgstr "Nome do modelo" #: standalone/harddrake2:84 #, c-format msgid "official vendor name of the cpu" msgstr "nome oficial do vendedor do processador" #: standalone/harddrake2:85 #, c-format msgid "the name of the CPU" msgstr "o nome do processador" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "ID Processador" #: standalone/harddrake2:86 #, c-format msgid "the number of the processor" msgstr "o numero do processador" #: standalone/harddrake2:87 #, c-format msgid "Model stepping" msgstr "Passo do modelo" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "passo do processador (numero de sub-modelo (geração))" #: standalone/harddrake2:88 #, c-format msgid "the vendor name of the processor" msgstr "o nome do vendedor do processador" #: standalone/harddrake2:89 #, c-format msgid "Write protection" msgstr "Protecção de escrita" #: standalone/harddrake2:89 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "a bandeira WP no registo CR0 do processador força a protecção de escrita ao " "nível da página da memória, permitindo assim o processador de evitar acessos " "desmarcados no kernel à memória do utilizador (é uma protecção contra erros)" #: standalone/harddrake2:93 #, c-format msgid "Floppy format" msgstr "Formatos de disquete" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "formatos de disquetes suportados pelo dispositivo" #: standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "Canal" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "Canal EIDE/SCSI" #: standalone/harddrake2:98 #, c-format msgid "Disk identifier" msgstr "Identificador do disco" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "normalmente o número série do disco" #: standalone/harddrake2:99 #, c-format msgid "Logical unit number" msgstr "Número da unidade lógica" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" "o número SCSI (LUN). Os dispositivos SCSI conectados a um endereço são " "únicamente\n" "identificados por um número de canal, um id e um número de unidade lógica" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, c-format msgid "Installed size" msgstr "Tamanho instalado" #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "Tamanho instalado da memória bank" #: standalone/harddrake2:107 #, c-format msgid "Enabled Size" msgstr "Tamanho activado" #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "Tamanho activado da memória bank" #: standalone/harddrake2:108 #, c-format msgid "type of the memory device" msgstr "tipo de memória do dispositivo" #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "Velocidade" #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "Velocidade da memória bank" #: standalone/harddrake2:110 #, c-format msgid "Bank connections" msgstr "Conexões Bank" #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "Designação do socket da memória bank" #: standalone/harddrake2:115 #, c-format msgid "Device file" msgstr "Ficheiro de dispositivo" #: standalone/harddrake2:115 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" "o ficheiro do dispositivo usado para comunicar com o controlador do kernel " "para o rato" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "Roda emulada" #: standalone/harddrake2:116 #, c-format msgid "whether the wheel is emulated or not" msgstr "se a roda está emulada ou não" #: standalone/harddrake2:117 #, c-format msgid "the type of the mouse" msgstr "o tipo do rato" #: standalone/harddrake2:118 #, c-format msgid "the name of the mouse" msgstr "o nome do rato" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "Número de botões" #: standalone/harddrake2:119 #, c-format msgid "the number of buttons the mouse has" msgstr "o número de botões que o rato tem" #: standalone/harddrake2:120 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "o tipo de bus no qual o rato está conectado" #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "Protocolo de rato usado pelo X11" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "o protocolo que o ambiente gráfico usa com o rato" #: standalone/harddrake2:128 standalone/harddrake2:137 #: standalone/harddrake2:144 standalone/harddrake2:152 #: standalone/harddrake2:342 #, c-format msgid "Identification" msgstr "Identificação" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "Conexão" #: standalone/harddrake2:138 #, c-format msgid "Performances" msgstr "Performances" #: standalone/harddrake2:139 #, c-format msgid "Bugs" msgstr "Erros" #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "FPU" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "Dispositivo" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "Partições" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "Características" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 #: standalone/printerdrake:146 standalone/printerdrake:159 #: standalone/printerdrake:171 #, c-format msgid "/_Options" msgstr "/_Opções" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 #: standalone/printerdrake:172 standalone/printerdrake:174 #: standalone/printerdrake:177 standalone/printerdrake:179 #, c-format msgid "/_Help" msgstr "/_Ajuda" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _printers" msgstr "/Auto-detectar _impressoras" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _modems" msgstr "/Auto-detectar _modems" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Auto-detectar controladores _jaz" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "/Auto-detectar controladores _zip parallelos" #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "/_Enviar lista do hardware" #: standalone/harddrake2:192 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "/_Sair" #: standalone/harddrake2:205 #, c-format msgid "/_Fields description" msgstr "/_Descrição dos campos" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "Ajuda Harddrake" #: standalone/harddrake2:216 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Assim que tiver escolhido um dispositivo, irá ser capaz de ver a informação " "do dispositivo em campos exibidos no frame correcto (\"Informação\")" #: standalone/harddrake2:222 standalone/printerdrake:177 #, c-format msgid "/_Report Bug" msgstr "/_Comunicar Erro" #: standalone/harddrake2:224 standalone/printerdrake:179 #, c-format msgid "/_About..." msgstr "/_Acerca..." #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "Acerca do Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" msgstr "" "Isto é o Harddrake, uma ferramenta %s para configurar o hardware.\n" "Versão: %s\n" "Autor: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" #: standalone/harddrake2:243 #, c-format msgid "Harddrake2" msgstr "Harddrake2" #: standalone/harddrake2:273 #, c-format msgid "Detected hardware" msgstr "Hardware detectado" #: standalone/harddrake2:278 #, c-format msgid "Configure module" msgstr "Configurar modulo" #: standalone/harddrake2:285 #, c-format msgid "Run config tool" msgstr "Executar ferramenta de configuração" #: standalone/harddrake2:309 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Clique num dispositivo na árvore esquerda para mostrar a sua informação aqui." #: standalone/harddrake2:330 standalone/printerdrake:306 #: standalone/printerdrake:320 #, c-format msgid "Unknown" msgstr "Desconhecido" #: standalone/harddrake2:350 #, c-format msgid "Misc" msgstr "Misc" #: standalone/harddrake2:428 #, c-format msgid "secondary" msgstr "secundario" #: standalone/harddrake2:428 #, c-format msgid "primary" msgstr "primário" #: standalone/harddrake2:432 #, c-format msgid "burner" msgstr "gravador" #: standalone/harddrake2:432 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:512 #, c-format msgid "" "The following devices needs proprietary drivers or firmwares in order to " "operate smoothly. The appropriate packages can be retrieved from the " "Mandriva Club. Do you want to subscribe to the Mandriva Club?" msgstr "" "Os seguintes dispositivos precisam controladores apropriados ou firmwares " "para um bom desempenho. Os pacotes apropriados podem ser transferidos do " "Clube Mandriva. Deseja subscrever-se no Clube Mandriva?" #: standalone/harddrake2:595 standalone/harddrake2:598 #, c-format msgid "Upload the hardware list" msgstr "Enviar lista do hardware" #: standalone/harddrake2:600 #, c-format msgid "Account:" msgstr "Conta:" #: standalone/harddrake2:602 #, c-format msgid "Hostname:" msgstr "Nome do endereço:" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Deseja que a tecla BackSpace devolva Delete na consola?" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:44 #, c-format msgid "You should install the following packages: %s" msgstr "Deve instalar os seguintes pacotes: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: standalone/localedrake:47 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: standalone/localedrake:55 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "A mudança está feita, mas para ser efectiva é preciso sair da sessão" #: standalone/logdrake:49 #, c-format msgid "Mandriva Linux Tools Logs" msgstr "Registos das Ferramentas Mandriva Linux" #: standalone/logdrake:50 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "Mostrar apenas para o dia seleccionado" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "/Ficheiro/_Novo" #: standalone/logdrake:70 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "/Ficheiro/_Abrir" #: standalone/logdrake:71 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "/Ficheiro/_Gravar" #: standalone/logdrake:72 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:73 #, c-format msgid "/File/Save _As" msgstr "/Ficheiro/Gravar _Como" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "/Ficheiro/-" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "/Opções/Teste" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "/Ajuda/_Acerca..." #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "Autenticação" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "Utilizador" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "Mensagens" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "Syslog" #: standalone/logdrake:115 #, c-format msgid "search" msgstr "pesquisa" #: standalone/logdrake:127 #, c-format msgid "A tool to monitor your logs" msgstr "Uma ferramenta para monitorizar os seus registos" #: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93 #, c-format msgid "Settings" msgstr "Configurações" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "Correspondente" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "mas não corresponde" #: standalone/logdrake:138 #, c-format msgid "Choose file" msgstr "Escolher ficheiro" #: standalone/logdrake:150 #, c-format msgid "Calendar" msgstr "Calendário" #: standalone/logdrake:160 #, c-format msgid "Content of the file" msgstr "Conteúdo do ficheiro" #: standalone/logdrake:164 standalone/logdrake:402 #, c-format msgid "Mail alert" msgstr "Alerta de correio" #: standalone/logdrake:171 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "O assistente de alerta falhou inesperadamente:" #: standalone/logdrake:224 #, c-format msgid "please wait, parsing file: %s" msgstr "por favor aguarde, a analisar o ficheiro: %s" #: standalone/logdrake:379 #, c-format msgid "Apache World Wide Web Server" msgstr "Servidor Apache WWW" #: standalone/logdrake:380 #, c-format msgid "Domain Name Resolver" msgstr "Resolução do Nome de Domínio" #: standalone/logdrake:381 #, c-format msgid "Ftp Server" msgstr "Servidor Ftp" #: standalone/logdrake:382 #, c-format msgid "Postfix Mail Server" msgstr "Servidor de Correio Postfix" #: standalone/logdrake:383 #, c-format msgid "Samba Server" msgstr "Servidor Samba" #: standalone/logdrake:385 #, c-format msgid "Webmin Service" msgstr "Serviço Webmin" #: standalone/logdrake:386 #, c-format msgid "Xinetd Service" msgstr "Serviço Xinetd" #: standalone/logdrake:397 #, c-format msgid "Configure the mail alert system" msgstr "Configurar o sistema de alerta do correio" #: standalone/logdrake:398 #, c-format msgid "Stop the mail alert system" msgstr "Parar o sistema de alerta do correio" #: standalone/logdrake:405 #, c-format msgid "Mail alert configuration" msgstr "Configuração de alerta do correio" #: standalone/logdrake:406 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Bem-vindo ao utilitário de configuração do correio.\n" "\n" "Aqui, pode configurar o sistema de alertas.\n" #: standalone/logdrake:416 #, c-format msgid "Services settings" msgstr "Configuração dos serviços" #: standalone/logdrake:417 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" "Irá receber um alerta se um dos serviços seleccionados já não estiver a " "correr" #: standalone/logdrake:424 #, c-format msgid "Load setting" msgstr "Carregar configuração" #: standalone/logdrake:425 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Irá receber um alerta se a carga for superior a este valor" #: standalone/logdrake:426 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Carregar" #: standalone/logdrake:431 #, c-format msgid "Alert configuration" msgstr "Configuração de alertas" #: standalone/logdrake:432 #, c-format msgid "Please enter your email address below " msgstr "Por favor indique o seu endereço de correio em baixo " #: standalone/logdrake:433 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "e indique o nome (ou o IP) do servidor SMTP que deseja usar" #: standalone/logdrake:452 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "O assistente configurou com sucesso o alerta de correio." #: standalone/logdrake:458 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "O assistente desactivou com sucesso o alerta de correio." #: standalone/logdrake:517 #, c-format msgid "Save as.." msgstr "Gravar como..." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Por favor escolha o seu tipo de rato." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Emular o terceiro botão?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Teste do Rato" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Por favor teste o seu rato:" #: standalone/net_applet:47 #, c-format msgid "Network is up on interface %s" msgstr "A rede está activa no interface %s" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:50 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "A rede está desactiva no interface %s. Clique em \"Configurar Rede\"" #: standalone/net_applet:56 standalone/net_applet:76 #: standalone/net_monitor:468 #, c-format msgid "Connect %s" msgstr "Conectar %s" #: standalone/net_applet:57 standalone/net_applet:76 #: standalone/net_monitor:468 #, c-format msgid "Disconnect %s" msgstr "Desconectar %s" #: standalone/net_applet:58 #, c-format msgid "Monitor Network" msgstr "Monitorizar Rede" #: standalone/net_applet:60 #, c-format msgid "Manage wireless networks" msgstr "Gerir redes wireless" #: standalone/net_applet:61 #, c-format msgid "Configure Network" msgstr "Configurar Rede" #: standalone/net_applet:63 #, c-format msgid "Watched interface" msgstr "Interface vigiado" #: standalone/net_applet:93 #, c-format msgid "Profiles" msgstr "Perfis" #: standalone/net_applet:102 #, c-format msgid "Get Online Help" msgstr "Ajuda Online" #: standalone/net_applet:335 #, c-format msgid "Interactive Firewall automatic mode" msgstr "Modo automático da Firewall interactiva" #: standalone/net_applet:340 #, c-format msgid "Always launch on startup" msgstr "Executar sempre no arranque" #: standalone/net_applet:344 #, c-format msgid "Wireless networks" msgstr "Redes wireless" #: standalone/net_applet:429 #, c-format msgid "Interactive Firewall: intrusion detected" msgstr "Firewall Interactiva: intrusão detectada" #: standalone/net_applet:442 #, c-format msgid "What do you want to do with this attacker?" msgstr "O que deseja fazer com este atacante?" #: standalone/net_applet:445 #, c-format msgid "Attack details" msgstr "Detalhes do ataque" #: standalone/net_applet:449 #, c-format msgid "Attack time: %s" msgstr "Hora do ataque: %s" #: standalone/net_applet:450 #, c-format msgid "Network interface: %s" msgstr "Interface de rede: %s" #: standalone/net_applet:451 #, c-format msgid "Attack type: %s" msgstr "Tipo de ataque: %s" #: standalone/net_applet:452 #, c-format msgid "Protocol: %s" msgstr "Protocolo: %s" #: standalone/net_applet:453 #, c-format msgid "Attacker IP address: %s" msgstr "Endereço IP do atacante: %s" #: standalone/net_applet:454 #, c-format msgid "Attacker hostname: %s" msgstr "Nome do endereço do atacante: %s" #: standalone/net_applet:457 #, c-format msgid "Service attacked: %s" msgstr "Serviço atacado: %s" #: standalone/net_applet:458 #, c-format msgid "Port attacked: %s" msgstr "Porta atacada: %s" #: standalone/net_applet:460 #, c-format msgid "Type of ICMP attack: %s" msgstr "Tipo de ataque ICMP: %s" #: standalone/net_applet:465 #, c-format msgid "Always blacklist (do not ask again)" msgstr "Colocar sempre na lista negra (não perguntar novamente)" #: standalone/net_monitor:57 standalone/net_monitor:62 #, c-format msgid "Network Monitoring" msgstr "Monitarização da Rede" #: standalone/net_monitor:98 #, c-format msgid "Global statistics" msgstr "Estatísticas Globais" #: standalone/net_monitor:101 #, c-format msgid "Instantaneous" msgstr "Instantâneo" #: standalone/net_monitor:101 #, c-format msgid "Average" msgstr "Média" #: standalone/net_monitor:102 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "Envio\n" "velocidade:" #: standalone/net_monitor:103 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "Recepção\n" "velocidade:" #: standalone/net_monitor:107 #, c-format msgid "" "Connection\n" "time: " msgstr "" "Conexão\n" "tempo: " #: standalone/net_monitor:114 #, c-format msgid "Use same scale for received and transmitted" msgstr "Use a mesma escala para recepção e transmissão" #: standalone/net_monitor:133 #, c-format msgid "Wait please, testing your connection..." msgstr "Por favor espere, a testar a sua conexão..." #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Disconnecting from Internet " msgstr "A desconectar da internet" #: standalone/net_monitor:182 standalone/net_monitor:195 #, c-format msgid "Connecting to Internet " msgstr "A conectar à internet" #: standalone/net_monitor:226 #, c-format msgid "Disconnection from Internet failed." msgstr "Desconexão da internet falhada." #: standalone/net_monitor:227 #, c-format msgid "Disconnection from Internet complete." msgstr "Desconexão da internet completa." #: standalone/net_monitor:229 #, c-format msgid "Connection complete." msgstr "Conexão completa." #: standalone/net_monitor:230 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" "Conexão falhada.\n" "Verifique a sua configuração no Centro de Controlo Mandriva Linux." #: standalone/net_monitor:335 #, c-format msgid "Color configuration" msgstr "Configuração de cores" #: standalone/net_monitor:383 standalone/net_monitor:403 #, c-format msgid "sent: " msgstr "enviado: " #: standalone/net_monitor:390 standalone/net_monitor:407 #, c-format msgid "received: " msgstr "recebido: " #: standalone/net_monitor:397 #, c-format msgid "average" msgstr "média" #: standalone/net_monitor:400 #, c-format msgid "Local measure" msgstr "Medidas locais" #: standalone/net_monitor:461 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "Aviso, outra conexão Internet foi detectada, talvez a usar a sua rede" #: standalone/net_monitor:472 #, c-format msgid "No internet connection configured" msgstr "Não foi configurada nenhuma conexão internet" #: standalone/printerdrake:76 #, c-format msgid "Reading data of installed printers..." msgstr "A ler dados das impressoras instaladas..." #: standalone/printerdrake:128 #, c-format msgid "%s Printer Management Tool" msgstr "%s Ferramenta de Manutenção de Impressoras" #: standalone/printerdrake:142 standalone/printerdrake:143 #: standalone/printerdrake:144 standalone/printerdrake:145 #: standalone/printerdrake:153 standalone/printerdrake:154 #: standalone/printerdrake:158 #, c-format msgid "/_Actions" msgstr "/_Acções" #: standalone/printerdrake:142 standalone/printerdrake:154 #, c-format msgid "/_Add Printer" msgstr "/_Adicionar Impressora" #: standalone/printerdrake:143 #, c-format msgid "/Set as _Default" msgstr "/Definir como _Predefinido" #: standalone/printerdrake:144 #, c-format msgid "/_Edit" msgstr "/_Editar" #: standalone/printerdrake:145 #, c-format msgid "/_Delete" msgstr "/_Apagar" #: standalone/printerdrake:146 #, c-format msgid "/_Expert mode" msgstr "/_Modo Perito" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "/_Refrescar" #: standalone/printerdrake:158 #, c-format msgid "/_Configure CUPS" msgstr "/_Configurar CUPS" #: standalone/printerdrake:171 #, c-format msgid "/Configure _Auto Administration" msgstr "/Configurar _Auto Administração" #: standalone/printerdrake:194 #, c-format msgid "Search:" msgstr "Procurar:" #: standalone/printerdrake:197 #, c-format msgid "Apply filter" msgstr "Aplicar filtro" #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Def." msgstr "Def." #: standalone/printerdrake:224 standalone/printerdrake:231 #, c-format msgid "Printer Name" msgstr "Nome da Impressora" #: standalone/printerdrake:224 #, c-format msgid "Connection Type" msgstr "Tipo de Conexão" #: standalone/printerdrake:231 #, c-format msgid "Server Name" msgstr "Nome do Servidor" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:239 #, c-format msgid "Add Printer" msgstr "Adicionar Impressora" #: standalone/printerdrake:239 #, c-format msgid "Add a new printer to the system" msgstr "Adiciona uma nova impressora ao sistema" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:242 #, c-format msgid "Set as default" msgstr "Definir como predefinido" #: standalone/printerdrake:242 #, c-format msgid "Set selected printer as the default printer" msgstr "Definir impressora como a impressora predefinida" #: standalone/printerdrake:245 #, c-format msgid "Edit selected printer" msgstr "Editar impressora seleccionada" #: standalone/printerdrake:248 #, c-format msgid "Delete selected printer" msgstr "Apagar impressora selecionada" #: standalone/printerdrake:251 #, c-format msgid "Refresh the list" msgstr "Refrescar a lista" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:254 #, c-format msgid "Configure CUPS" msgstr "Configurar CUPS" #: standalone/printerdrake:254 #, c-format msgid "Configure CUPS printing system" msgstr "Configurar o sistema de impressão CUPS" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Enabled" msgstr "Activado" #: standalone/printerdrake:310 standalone/printerdrake:324 #: standalone/printerdrake:348 standalone/printerdrake:360 #, c-format msgid "Disabled" msgstr "Desactivado" #: standalone/printerdrake:596 #, c-format msgid "Authors: " msgstr "Autores: " #. -PO: here %s is the version number #: standalone/printerdrake:606 #, c-format msgid "Printer Management %s" msgstr "Manutenção de Impressoras %s" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "Os pacotes SANE precisam ser instalados para usar scanners.\n" "\n" "Deseja instalar os pacotes SANE?" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "A abortar o Scannerdrake." #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Não foi possível instalar os pacotes necessários para configurar um scanner " "com o Scannerdrake." #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "O scannerdrake não irá ser iniciado agora." #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "A procurar scanners configurados..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "A procurar novos novos scanners..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "A regerar a lista de scanners configurados..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "O %s não é suportado por esta versão do %s." #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s encontrado em %s, configurar automaticamente?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" "%s não está na lista na base de dados do scanner, configurar manualmente?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Seleccione um modelo de scanner" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Modelo detectado: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Porta: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr " (NÃO SUPORTADO)" #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "O %s não é suportado em Linux." #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "Não instalar o ficheiro firmware" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" "É possível que o seu %s precise que o seu firmware seja carregado cada vez " "que é ligado." #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "Se este é o caso, pode fazer com que isto seja feito automáticamente." #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" "Para tal, precisa fornecer o ficheiro firmware do seu scanner para que possa " "ser instalado." #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "Encontre o ficheiro no CD ou disquete que vem com o scanner, na página web " "do fabricante, ou na sua partição Windows." #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "Instalar o ficheiro firmware a partir de" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "Seleccione o ficheiro firmware" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "O ficheiro de firmware %s não existe ou está ilegível!" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" "É possível que os seus scanners precisem que o seu firmware seja carregado " "quando estiverem ligados." #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" "Para tal, precisar fornecer os ficheiros de firmware para os seus scanners " "para que possam ser instalados." #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" "Se já instalou o firmware do seu scanner pode actualizar o firmware aqui ao " "fornecer o novo ficheiro de firmware." #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "Instalar firmware para" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "Seleccione o ficheiro firmware para %s" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "Não foi possível instalar o ficheiro firmware para %s!" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "O ficheiro firmware para o seu %s foi instalado com sucesso." #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "O %s não é suportado" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "A %s deve ser configurada pelo printerdrake.\n" "Pode executar o printerdrake a partir do %s Centro de Controlo na secção " "Hardware." #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Auto-detectar portas disponíveis" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "Por favor escolha o dispositivo onde o seu %s está ligado" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Nota: as portas paralelas não podem ser auto-detectadas)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "escolher dispositivo" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "A procurar scanners..." #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "A definir os módulos kernel..." #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "Atenção!" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" "O seu %s não pode ser configurado automáticamente totalmente.\n" "\n" "Ajustes manuais são necessários. Por favor edite o ficheiro de configuração /" "etc/sane.d/%s.conf. " #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" "Mais informação na página do manual do controlador. Execute o comando \"man " "sane-%s\" para o lêr." #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "A seguir pode digitalizar documentos usando o \"XSane\" ou o \"Kooka\" a " "partir do menu de aplicações Multimédia/Gráficos." #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" "A sua %s foi configurada, mas é possível que sejam necessários ajustes " "manuais para a pôr a funcionar. " #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" "Se não aparecer na lista de scanners configurados da janela principal do " "Scannerdrake ou se não trabaçhar correctamente, " #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "edite o ficheiro de configuração /etc/sane.d/%s.conf. " #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "O seu %s foi configurado.\n" "Pode agora digitalizar documentos usando o \"XSane\" ou o \"Kooka\" a partir " "do menu de aplicações Multimédia/Gráficos." #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Os seguintes scanners\n" "\n" "%s\n" "estão disponíveis no seu sistema.\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "O seguinte scanner\n" "\n" "%s\n" "está disponível no seu sistema.\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Não há scanners disponiveis no seu sistema.\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Procurar por novos scanners" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "Adicionar um scanner manualmente" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "Instalar/Actualizar ficheiros firmware" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "Partilha do Scanner" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Todas as máquinas remotas" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Esta máquina" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Aqui pode escolher se os scanners conectados a esta máquina devem ser " "disponibilizados para máquinas remotas e para que máquinas." #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Também pode decidir aqui se os scanners em máquinas remotas devem ser " "disponibilizados nesta máquina." #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Os scanners nesta máquina estão disponíveis para outros computadores" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "O scanner partilha dois anfitriões: " #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "Use os scanners nos computadores remotos" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "Use os scanners nos anfitriões: " #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "Partilhar scanners locais" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Estas são as máquinas nas quais o(s) scanner(s) locais devem estar " "disponiveis:" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Adicionar um endereço" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Editar o endereço seleccionado" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Remover o endereço seleccionado" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "Nome/Endereço IP do endereço:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" "Escolha o endereço onde os digitalizadores locais devem estar disponíveis:" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Deve indicar o nome de endereço ou um endereço IP.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "Este endereço já está na lista, não pode ser adicionado novamente.\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Uso de scanners remotos" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Estas são as máquinas nas quais os scanners devem ser usados:" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "saned precisa ser instalado para partilhar o(o) scanner(s) locai(s).\n" "\n" "Deseja instalar o pacote saned?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "O seu scanner não vai estar disponível na rede." #: standalone/service_harddrake:105 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Alguns dispositivos na classe de hardware \"%s\" foram removidos:\n" #: standalone/service_harddrake:106 #, c-format msgid "- %s was removed\n" msgstr "- %s foi removido\n" #: standalone/service_harddrake:109 #, c-format msgid "Some devices were added: %s\n" msgstr "Foram adicionados alguns dispositivos: %s\n" #: standalone/service_harddrake:110 #, c-format msgid "- %s was added\n" msgstr "- %s foi adicionado\n" #: standalone/service_harddrake:208 #, c-format msgid "Hardware probing in progress" msgstr "Detecção do hardware em progresso" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "Alterações do hardware na classe \"%s\" (%s segundos para responder)" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Deseja executar a ferramenta de configuração adequada?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Linguagem" #: steps.pm:15 #, c-format msgid "License" msgstr "Licença" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Configurar rato" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Detecção de discos rígidos" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Seleccione a classe de instalação" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Escolha o seu teclado" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Formatar partições" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Escolha os pacotes a instalar" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Instalar sistema" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "Senha do administrador" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Adicionar um utilizador" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Configurar rede" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Carregador de arranque" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Configurar X" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Configurar serviços" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Instalar actualizações" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Sair da instalação" #: ugtk2.pm:899 #, c-format msgid "Is this correct?" msgstr "Isto está correcto?" #: ugtk2.pm:959 #, c-format msgid "No file chosen" msgstr "Nenhum ficheiro escolhido" #: ugtk2.pm:961 #, c-format msgid "You have chosen a file, not a directory" msgstr "Escolheu um ficheiro, não um directório" #: ugtk2.pm:963 #, c-format msgid "You have chosen a directory, not a file" msgstr "Escolheu um directório, não um ficheiro" #: ugtk2.pm:965 #, c-format msgid "No such directory" msgstr "Nenhum directório encontrado" #: ugtk2.pm:965 #, c-format msgid "No such file" msgstr "Nenhum ficheiro encontrado" #: ugtk2.pm:1046 #, c-format msgid "Expand Tree" msgstr "Expandir Árvore" #: ugtk2.pm:1047 #, c-format msgid "Collapse Tree" msgstr "Encolher Árvore" #: ugtk2.pm:1048 #, c-format msgid "Toggle between flat and group sorted" msgstr "Alternar entre ordenação por grupo e directa" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s não está instalado\n" "Clique em \"Seguinte\"para instalar ou em \"Cancelar\" para sair" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Instalação falhada"