# KTranslator Generated File # Translation file of Mandrake graphic install # Copyright (C) 1999 Mandrakesoft # Terje Bjerkelia , 1999-2000 # Andreas Bergstrøm , 2000 # msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 2002-12-05 19:52+0100\n" "PO-Revision-Date: 2002-03-10 11:04GMT\n" "Last-Translator: Terje Bjerkelia \n" "Language-Team: Norsk\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-1\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.5\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kB" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kB" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB eller mer" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "Velg en X-tjener" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X-tjener" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "Multi-hode konfigurasjon" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "Systemet ditt støtter konfigurasjon for flere hoder.\n" "Hva ønsker du å gjøre?" #: ../../Xconfig/card.pm_.c:288 msgid "Select the memory size of your graphics card" msgstr "Velg minnestørrelsen til grafikk-kortet ditt" #: ../../Xconfig/card.pm_.c:349 msgid "XFree configuration" msgstr "XFree konfigurasjon" #: ../../Xconfig/card.pm_.c:351 msgid "Which configuration of XFree do you want to have?" msgstr "Hvilken konfigurasjon av XFree vil du ha?" #: ../../Xconfig/card.pm_.c:383 msgid "Configure all heads independently" msgstr "Konfigurere all hoder uavhengig" #: ../../Xconfig/card.pm_.c:384 msgid "Use Xinerama extension" msgstr "Bruk Xinerama utvidelse" #: ../../Xconfig/card.pm_.c:389 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Konfigurer bare kort \"%s\"%s" #: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s med maskinvare 3D akselerasjon" #: ../../Xconfig/card.pm_.c:416 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree " "%s.\n" "Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D." #: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s." #: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon" #: ../../Xconfig/card.pm_.c:429 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree " "%s,\n" "MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN.\n" "Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D." #: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s,\n" "MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN." #: ../../Xconfig/card.pm_.c:455 msgid "Xpmac (installation display driver)" msgstr "Xpmac (installasjons skjermdriver)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961 msgid "Custom" msgstr "Skreddersydd" #: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "Grafikk-kort" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "Monitor" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210 msgid "Resolution" msgstr "Oppløsning" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "Test" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Valg" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269 #: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181 #: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015 #: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435 #: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949 msgid "Ok" msgstr "Ok" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114 #: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204 msgid "Quit" msgstr "Avslutt" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Behold endringene?\n" "Nåværende konfigurasjon er:\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "Velg en monitor" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "Generisk" #: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67 #: ../../standalone/harddrake2_.c:68 msgid "Vendor" msgstr "Selger" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "Plug'n Play søking mislykket. Vennligst velg en monitor" #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "De to kritiske parametrene er den vertikale oppfrisknings-raten, som er " "raten\n" "som som oppfrisker hele skjermen, og mest viktig den horisontale \n" "sync-raten, som er raten som scanlinjer blir vist på.\n" "\n" "Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- " "område\n" "som er utenfor det monitoren din er i stand til å klare: Du kan skade " "skjermen din.\n" "Hvis du er usikker, velg en konservativ innstilling." #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "Horisontal oppfrisknings-rate" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "Vertikal oppfrisknings-rate" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 farger (8 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32 tusen farger (15 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65 tusen farger (16 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 millioner farger (24 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 milliarder farger (32 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:130 msgid "Resolutions" msgstr "Oppløsninger" #: ../../Xconfig/resolution_and_depth.pm_.c:255 msgid "Choose the resolution and the color depth" msgstr "Velg oppløsning og fargedybde" #: ../../Xconfig/resolution_and_depth.pm_.c:256 #, c-format msgid "Graphics card: %s" msgstr "Grafikk-kort: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001 #: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055 #: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198 #: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907 #: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047 #: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104 #: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112 #: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286 #: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677 #: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918 #: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204 #: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295 #: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438 #: ../../ugtk2.pm_.c:926 msgid "Cancel" msgstr "Avbryt" #: ../../Xconfig/test.pm_.c:29 msgid "Test of the configuration" msgstr "Test konfigurasjon" #: ../../Xconfig/test.pm_.c:30 msgid "Do you want to test the configuration?" msgstr "Vil du teste konfigurasjonen?" #: ../../Xconfig/test.pm_.c:30 msgid "Warning: testing this graphic card may freeze your computer" msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tastatur-oppsett: %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "Type mus: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "Enhet mus: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitor HorizSync: %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitor VertRefresh: %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "Grafikk-kort: %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Minne grafikk: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "Fargedybde: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "Oppløsning: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86-tjener: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 driver: %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "X ved oppstart" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Jeg kan sette opp maskinen din til å automatisk starte X ved oppstart.\n" "Vil du at X skal starte når du starter maskinen på nytt?" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Det ser ut til at grafikk-kortet ditt har en TV-UT kontakt.\n" "Det kan settes opp til å fungere ved hjelp av frame-buffer.\n" "\n" "For at dette skal virke må kortet være plugget til TV'en din før oppstart av " "maskinen din.\n" "Velg så \"TVout\" inngangen i oppstartslasteren\n" "\n" "Har du dette?" #: ../../Xconfig/various.pm_.c:85 msgid "What norm is your TV using?" msgstr "Hva slags norm bruker TV'en din?" #: ../../any.pm_.c:107 ../../any.pm_.c:132 msgid "First sector of boot partition" msgstr "Første sektor av oppstartspartisjon" #: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209 msgid "First sector of drive (MBR)" msgstr "Første sektor av disk (MBR)" #: ../../any.pm_.c:111 msgid "SILO Installation" msgstr "SILO-installasjon" #: ../../any.pm_.c:112 ../../any.pm_.c:125 msgid "Where do you want to install the bootloader?" msgstr "Hvor ønsker du installere oppstartslasteren?" #: ../../any.pm_.c:124 msgid "LILO/grub Installation" msgstr "LILO/grub-installasjon" #: ../../any.pm_.c:136 ../../any.pm_.c:150 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:138 msgid "LILO with text menu" msgstr "LILO med tekstmeny" #: ../../any.pm_.c:139 ../../any.pm_.c:150 msgid "LILO with graphical menu" msgstr "LILO med grafisk meny" #: ../../any.pm_.c:142 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:146 msgid "Boot from DOS/Windows (loadlin)" msgstr "Start fra DOS/Windows (loadlin)" #: ../../any.pm_.c:148 ../../any.pm_.c:150 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:158 ../../any.pm_.c:189 msgid "Bootloader main options" msgstr "Hovedopsjoner for oppstartslaster" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader to use" msgstr "Oppstartslaster som skal brukes" #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "Installasjon oppstartslaster" #: ../../any.pm_.c:163 ../../any.pm_.c:192 msgid "Boot device" msgstr "Oppstartsenhet" #: ../../any.pm_.c:164 msgid "Compact" msgstr "Kompakt" #: ../../any.pm_.c:164 msgid "compact" msgstr "kompakt" #: ../../any.pm_.c:165 ../../any.pm_.c:289 msgid "Video mode" msgstr "Skjermmodus" #: ../../any.pm_.c:167 msgid "Delay before booting default image" msgstr "Forsinkelse før oppstart av standard bilde" #: ../../any.pm_.c:169 ../../any.pm_.c:772 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71 #: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916 #: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622 #: ../../standalone/drakconnect_.c:647 msgid "Password" msgstr "Passord" #: ../../any.pm_.c:170 ../../any.pm_.c:773 #: ../../install_steps_interactive.pm_.c:1078 msgid "Password (again)" msgstr "Passord (igjen)" #: ../../any.pm_.c:171 msgid "Restrict command line options" msgstr "Begrense kommandolinje-opsjoner" #: ../../any.pm_.c:171 msgid "restrict" msgstr "begrense" #: ../../any.pm_.c:173 msgid "Clean /tmp at each boot" msgstr "Tøm /tmp ved hver oppstart" #: ../../any.pm_.c:174 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Presiser RAM-størrelse hvis det trengs (funnet %d MB)" #: ../../any.pm_.c:176 msgid "Enable multi profiles" msgstr "Slå på multiprofiler" #: ../../any.pm_.c:180 msgid "Give the ram size in MB" msgstr "Oppgi ram-størrelsen i MB" #: ../../any.pm_.c:182 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../diskdrake/interactive.pm_.c:1204 #: ../../install_steps_interactive.pm_.c:1072 msgid "Please try again" msgstr "Vennligst prøv igjen" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../install_steps_interactive.pm_.c:1072 msgid "The passwords do not match" msgstr "Passordene stemmer ikke overens" #: ../../any.pm_.c:191 msgid "Init Message" msgstr "Initmelding" #: ../../any.pm_.c:193 msgid "Open Firmware Delay" msgstr "Åpne firmwareforsinkelse" #: ../../any.pm_.c:194 msgid "Kernel Boot Timeout" msgstr "Kernel Boot Timeout" #: ../../any.pm_.c:195 msgid "Enable CD Boot?" msgstr "Skal det være mulig å boote fra CD?" #: ../../any.pm_.c:196 msgid "Enable OF Boot?" msgstr "Skal det være mulig å boote fra OF?" #: ../../any.pm_.c:197 msgid "Default OS?" msgstr "Standard operativsystem?" #: ../../any.pm_.c:231 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Du har bestemt deg for å installere oppstartslasteren på en partisjon.\n" "Dette innebærer at du allerede har en oppstartslaster på den disken du " "starter fra (eks: System Commander.)\n" "\n" "Hvilken disk starter du fra?" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "Her er de forskjellige oppføringene.\n" "Du kan legge til flere eller endre de eksisterende." #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531 #: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953 #: ../../standalone/drakfont_.c:996 msgid "Add" msgstr "Legg til" #: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726 msgid "Done" msgstr "Ferdig" #: ../../any.pm_.c:257 msgid "Modify" msgstr "Modifiser" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "Hvilken inngangstype vil du legge til" #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "Andre OS (SunOS...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "Andre OS (MacOS...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "Andre OS (windows...)" #: ../../any.pm_.c:285 msgid "Image" msgstr "Bilde" #: ../../any.pm_.c:286 ../../any.pm_.c:297 msgid "Root" msgstr "Root" #: ../../any.pm_.c:287 ../../any.pm_.c:315 msgid "Append" msgstr "Tilføye" #: ../../any.pm_.c:291 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:292 msgid "Read-write" msgstr "Les-skriv" #: ../../any.pm_.c:299 msgid "Table" msgstr "Tabell" #: ../../any.pm_.c:300 msgid "Unsafe" msgstr "Usikker" #: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314 msgid "Label" msgstr "Etikett" #: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215 msgid "Default" msgstr "Standard" #: ../../any.pm_.c:316 msgid "Initrd-size" msgstr "Initrdstørrelse" #: ../../any.pm_.c:318 msgid "NoVideo" msgstr "Ingen video" #: ../../any.pm_.c:326 msgid "Remove entry" msgstr "Fjern inngang" #: ../../any.pm_.c:329 msgid "Empty label not allowed" msgstr "Tom etikett er ikke tillatt" #: ../../any.pm_.c:330 msgid "You must specify a kernel image" msgstr "Du må velge ett kjernebilde" #: ../../any.pm_.c:330 msgid "You must specify a root partition" msgstr "Du må ha en rotpartisjon" #: ../../any.pm_.c:331 msgid "This label is already used" msgstr "Denne etiketten er allerede i bruk" #: ../../any.pm_.c:640 #, c-format msgid "Found %s %s interfaces" msgstr "Fant %s %s grensesnitt" #: ../../any.pm_.c:641 msgid "Do you have another one?" msgstr "Har du enda ett?" #: ../../any.pm_.c:642 #, c-format msgid "Do you have any %s interfaces?" msgstr "Har du noen %s grensesnitt?" #: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925 msgid "No" msgstr "Nei" #: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258 #: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267 #: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925 msgid "Yes" msgstr "Ja" #: ../../any.pm_.c:645 msgid "See hardware info" msgstr "Se maskinvareinfo" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:662 #, c-format msgid "Installing driver for %s card %s" msgstr "Installerer driver for %s kort %s" #: ../../any.pm_.c:663 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: ../../any.pm_.c:674 #, fuzzy, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Du kan nå gi modul %s de opsjoner du føler for.\n" "Merk at addresser bør gis med 0x prefikset som i '0x123'" #: ../../any.pm_.c:680 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Du kan nå oppgi dens opsjoner for modul %s.\n" "Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n" "F.eks., ``io=0x300 irq=7''" #: ../../any.pm_.c:682 msgid "Module options:" msgstr "Modulopsjoner:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:694 #, c-format msgid "Which %s driver should I try?" msgstr "Hvilken %s driver skal jeg prøve?" #: ../../any.pm_.c:703 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "I noen tilfeller trenger %s driveren å ha ekstra informasjon for å virke\n" "ordentlig, selv om den normalt virker fint foruten. Ønsker du å spesifisere " "ekstra\n" "opsjoner for den eller tillate driveren å sondere maskinen din for\n" "informasjonen den trenger? Av og til vil sondering stoppe maskinen, men " "burde\n" "ikke forårsake noen skader." #: ../../any.pm_.c:707 msgid "Autoprobe" msgstr "Automatisk sondering" #: ../../any.pm_.c:707 msgid "Specify options" msgstr "Spesifiser opsjoner" #: ../../any.pm_.c:719 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Lasting av modul %s feilet.\n" "Ønsker du å prøve igjen med andre parametere?" #: ../../any.pm_.c:734 msgid "access to X programs" msgstr "tilgang til X-programmer" #: ../../any.pm_.c:735 msgid "access to rpm tools" msgstr "tilgang til rpmverktøy" #: ../../any.pm_.c:736 msgid "allow \"su\"" msgstr "tilgang til \"su\"" #: ../../any.pm_.c:737 msgid "access to administrative files" msgstr "tilgang til administrative filer" #: ../../any.pm_.c:738 #, fuzzy msgid "access to network tools" msgstr "tilgang til rpmverktøy" #: ../../any.pm_.c:739 msgid "access to compilation tools" msgstr "tilgang til kompileringsverktøy" #: ../../any.pm_.c:744 #, c-format msgid "(already added %s)" msgstr "(allerede lagt til %s)" #: ../../any.pm_.c:749 msgid "This password is too simple" msgstr "Dette passordet er for enkelt" #: ../../any.pm_.c:750 msgid "Please give a user name" msgstr "Vennligst oppgi et brukernavn" #: ../../any.pm_.c:751 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Brukernavnet kan kun inneholde små bokstaver, tall, `-' og `_'" #: ../../any.pm_.c:752 msgid "The user name is too long" msgstr "Dette brukernavnet er for langt" #: ../../any.pm_.c:753 msgid "This user name is already added" msgstr "Denne brukeren er allerede lagt til" #: ../../any.pm_.c:757 msgid "Add user" msgstr "Legg til bruker" #: ../../any.pm_.c:758 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Entre en bruker\n" "%s" #: ../../any.pm_.c:759 msgid "Accept user" msgstr "Godta bruker" #: ../../any.pm_.c:770 msgid "Real name" msgstr "Virkelig navn" #: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802 #: ../../printer/printerdrake.pm_.c:915 msgid "User name" msgstr "Brukernavn" #: ../../any.pm_.c:774 msgid "Shell" msgstr "Skall" #: ../../any.pm_.c:776 msgid "Icon" msgstr "Ikon" #: ../../any.pm_.c:803 msgid "Autologin" msgstr "Autoinnlogging" #: ../../any.pm_.c:804 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "Jeg kan sette opp maskinen din til å automatisk logge på en bruker ved " "oppstart.\n" "Vil du bruke denne tjenesten?" #: ../../any.pm_.c:808 msgid "Choose the default user:" msgstr "Velg standard bruker:" #: ../../any.pm_.c:809 msgid "Choose the window manager to run:" msgstr "Velg vindushåndtereren som skal kjøres:" #: ../../any.pm_.c:824 msgid "Please choose a language to use." msgstr "Vennligst velg språk som skal brukes." #: ../../any.pm_.c:826 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "Du kan velge andre språk som vil være tilgjengelige etter installasjon" #: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697 #: ../../standalone/drakxtv_.c:70 msgid "All" msgstr "Alle" #: ../../any.pm_.c:961 msgid "Allow all users" msgstr "Tillat alle brukere" #: ../../any.pm_.c:961 msgid "No sharing" msgstr "Ingen deling" #: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pakken %s må installeres. Vil du installere den?" #: ../../any.pm_.c:973 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem ønsker du" #: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190 #, c-format msgid "Mandatory package %s is missing" msgstr "Obligatorisk pakke %s mangler" #: ../../any.pm_.c:987 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm_.c:1001 msgid "Launch userdrake" msgstr "Start userdrake" #: ../../any.pm_.c:1003 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "per-user deling bruker gruppen \"fileshare\". \n" "Du kan bruke userdrake til å legge til en bruker i denne gruppen." #: ../../any.pm_.c:1053 ../../security/level.pm_.c:7 msgid "Welcome To Crackers" msgstr "Velkommen til Crackers" #: ../../any.pm_.c:1054 ../../security/level.pm_.c:8 msgid "Poor" msgstr "Dårlig" #: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9 msgid "Standard" msgstr "Standard" #: ../../any.pm_.c:1056 ../../security/level.pm_.c:10 msgid "High" msgstr "Høy" #: ../../any.pm_.c:1057 ../../security/level.pm_.c:11 msgid "Higher" msgstr "Høyere" #: ../../any.pm_.c:1058 ../../security/level.pm_.c:12 msgid "Paranoid" msgstr "Paranoid" #: ../../any.pm_.c:1061 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Dette nivået bør brukes med forsiktighet. Det gjør systemet ditt lettere å\n" "bruke, men mer utsatt: det må ikke brukes på en maskin koblet til andre\n" "eller til Internett. Det er ingen adgang med passord." #: ../../any.pm_.c:1064 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Passord er nå aktivert, men bruk som nettverksmaskin er fortsatt ikke " "anbefalt." #: ../../any.pm_.c:1065 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til " "tilkobling mot Internett som klient." #: ../../any.pm_.c:1066 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Det er allerede noen restriksjoner, og flere automatiske kontroller kjøres " "hver natt." #: ../../any.pm_.c:1067 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Med dette sikkerhetsnivået kan systemet brukes som tjener.\n" "Sikkerheten er nå høy nok til å bruke systemet som en tjener som godtar\n" "oppkoblinger fra mange klienter. Merk: Hvis maskinen din kun er en klient på " "Internett burde du velge et lavere nivå." #: ../../any.pm_.c:1070 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Basert på forrige nivå, men nå er systemet fullstendig stengt.\n" "Sikkerhetsfunksjonene er nå på maksimum." #: ../../any.pm_.c:1076 msgid "DrakSec Basic Options" msgstr "Draksec standardvalg" #: ../../any.pm_.c:1077 msgid "Please choose the desired security level" msgstr "Vennligst velg ønsket sikkerhetsnivå" #: ../../any.pm_.c:1080 msgid "Security level" msgstr "Sikkerhetsnivå" #: ../../any.pm_.c:1082 msgid "Use libsafe for servers" msgstr "Bruk libsafe for tjenere" #: ../../any.pm_.c:1083 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Ett bibliotek som beskytter mot buffer overflow og strengformateringsangrep." #: ../../any.pm_.c:1084 msgid "Security Administrator (login or email)" msgstr "Sikkerhetsadministrator (login eller email)" #: ../../any.pm_.c:1166 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:436 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Velkommen til %s, operativsystem-velgeren!\n" "\n" "Velg et operativsystem fra listen over eller\n" "vent %d sekunder for standard oppstart.\n" "\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:983 msgid "Welcome to GRUB the operating system chooser!" msgstr "Velkommen til GRUB, operativsystem-velgeren!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:986 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Bruk %c og %c tastene for å velge hvilken inngang som er markert." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Trykk enter for † starte opp valgt OS, 'e' for † redigere" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 msgid "commands before booting, or 'c' for a command-line." msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder." #: ../../bootloader.pm_.c:999 msgid "not enough room in /boot" msgstr "ikke nok plass i /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1099 msgid "Desktop" msgstr "Skrivebord" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1101 msgid "Start Menu" msgstr "Startmeny" #: ../../bootloader.pm_.c:1120 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Du kan ikke installere oppstartslasteren på en %s partisjon\n" #: ../../bootlook.pm_.c:53 msgid "Boot Style Configuration" msgstr "Oppstartsstilkonfigurasjon" #: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54 #: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82 #: ../../standalone/logdrake_.c:74 msgid "/_File" msgstr "/_Fil" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/logdrake_.c:80 msgid "/File/_Quit" msgstr "/Fil/_Avslutt" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:82 msgid "NewStyle Categorizing Monitor" msgstr "NewStyle Categorizing Monitor" #: ../../bootlook.pm_.c:83 msgid "NewStyle Monitor" msgstr "NewStyle Monitor" #: ../../bootlook.pm_.c:84 msgid "Traditional Monitor" msgstr "Tradisjonell monitor" #: ../../bootlook.pm_.c:85 msgid "Traditional Gtk+ Monitor" msgstr "Tradisjonell Gtk+ monitor" #: ../../bootlook.pm_.c:86 msgid "Launch Aurora at boot time" msgstr "Start Aurora ved oppstart" #: ../../bootlook.pm_.c:89 msgid "Lilo/grub mode" msgstr "Lilo/grub modus" #: ../../bootlook.pm_.c:89 msgid "Yaboot mode" msgstr "Yaboot modus" #: ../../bootlook.pm_.c:138 msgid "Install themes" msgstr "Installer temaer" #: ../../bootlook.pm_.c:139 msgid "" "Display theme\n" "under console" msgstr "" "Vis tema\n" "under konsoll" #: ../../bootlook.pm_.c:140 msgid "Create new theme" msgstr "Opprett nytt tema" #: ../../bootlook.pm_.c:184 #, c-format msgid "Backup %s to %s.old" msgstr "Backup %s til %s.old" #: ../../bootlook.pm_.c:187 #, c-format msgid "Copy %s to %s" msgstr "Kopier %s til %s" #: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224 #: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119 #: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352 #: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481 #: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21 msgid "Error" msgstr "Feil" #: ../../bootlook.pm_.c:192 msgid "Lilo message not found" msgstr "Lilo beskjed ikke funnet" #: ../../bootlook.pm_.c:222 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "Kan ikke skrive /etc/sysconfig/bootsplash." #: ../../bootlook.pm_.c:222 #, c-format msgid "Write %s" msgstr "Skriv %s" #: ../../bootlook.pm_.c:224 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "Kan ikke skrive /etc/sysconfig/bootsplash\n" "Fil ikke funnet." #: ../../bootlook.pm_.c:235 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Kan ikke starte mkinitrd -f /boot/initrd-%s.img %s." #: ../../bootlook.pm_.c:238 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "Lag initrd 'mkinitrd -f /boot/initrd-%s.img %s'." #: ../../bootlook.pm_.c:244 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "Kan ikke starte LiLo på nytt!\n" "Start \"lilo\" som root i kommandolinjen for å fullføre LiLo tema " "installasjon." #: ../../bootlook.pm_.c:248 msgid "Relaunch 'lilo'" msgstr "Start 'lilo' på nytt" #: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156 #: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449 msgid "Notice" msgstr "Notis" #: ../../bootlook.pm_.c:251 msgid "LiLo and Bootsplash themes installation successfull" msgstr "LiLo og Bootsplash temaer installert suksessfullt" #: ../../bootlook.pm_.c:251 msgid "Theme installation failed!" msgstr "Tema installasjon mislykket!" #: ../../bootlook.pm_.c:259 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Du bruker for øyeblikket %s som oppstartshåndterer.\n" "Klikk på Konfigurer for å starte oppsett-hjelperen." #: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380 #: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400 #: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551 msgid "Configure" msgstr "Konfigurer" #: ../../bootlook.pm_.c:268 msgid "Splash selection" msgstr "Splash valg" #: ../../bootlook.pm_.c:271 msgid "Themes" msgstr "Teamer" #: ../../bootlook.pm_.c:273 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" "\n" "Velg tema for\n" "lilo og bootsplash,\n" "du kan velge\n" "de separat" #: ../../bootlook.pm_.c:276 msgid "Lilo screen" msgstr "Lilo skjerm" #: ../../bootlook.pm_.c:281 msgid "Bootsplash" msgstr "Bootsplash" #: ../../bootlook.pm_.c:316 msgid "System mode" msgstr "Systemmodus" #: ../../bootlook.pm_.c:318 msgid "Launch the graphical environment when your system starts" msgstr "Start W-Windowsystemet ved oppstart" #: ../../bootlook.pm_.c:323 msgid "No, I don't want autologin" msgstr "Nei, jeg vil ikke ha autologin" #: ../../bootlook.pm_.c:325 msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)" #: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96 #: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355 #: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797 #: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137 #: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432 #: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561 #: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604 #: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911 #: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288 #: ../../ugtk2.pm_.c:355 msgid "OK" msgstr "OK" #: ../../common.pm_.c:107 msgid "GB" msgstr "GB" #: ../../common.pm_.c:107 msgid "KB" msgstr "KB" #: ../../common.pm_.c:107 msgid "MB" msgstr "MB" #: ../../common.pm_.c:115 msgid "TB" msgstr "TB" #: ../../common.pm_.c:123 #, c-format msgid "%d minutes" msgstr "%d minutter" #: ../../common.pm_.c:125 msgid "1 minute" msgstr "1 minutt" #: ../../common.pm_.c:127 #, c-format msgid "%d seconds" msgstr "%d sekunder" #: ../../common.pm_.c:172 msgid "Can't make screenshots before partitioning" msgstr "Jeg kan ikke ta skjembilder før partisjonering." #: ../../common.pm_.c:179 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Skjermbilder vil være tilgjengelig etter installasjon i %s" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:127 msgid "France" msgstr "Frankrike" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "Costa Rica" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:130 msgid "Belgium" msgstr "Belgia" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "Tjekkia" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "Germany" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "Hellas" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "Norge" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "Sverige" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:128 msgid "Netherlands" msgstr "Netherlands" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65 msgid "Italy" msgstr "Italia" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "Østerrike" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:131 msgid "United States" msgstr "USA" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/dav.pm_.c:27 msgid "New" msgstr "Ny" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "Demonter" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "Monter" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "Tjener" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391 #: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "Monteringspunkt" #: ../../diskdrake/dav.pm_.c:85 msgid "Please enter the WebDAV server URL" msgstr "Vennligst entre WebDAV tjener URL'en." #: ../../diskdrake/dav.pm_.c:88 msgid "The URL must begin with http:// or https://" msgstr "URL'en må begynne med http:// eller https://" #: ../../diskdrake/dav.pm_.c:109 msgid "Server: " msgstr "Tjener: " #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452 #: ../../diskdrake/interactive.pm_.c:1102 #: ../../diskdrake/interactive.pm_.c:1177 msgid "Mount point: " msgstr "Monteringspunkt: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183 #, c-format msgid "Options: %s" msgstr "Valg: %s" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "Please make a backup of your data first" msgstr "Vennligst ta sikkerhetskopi av din data først" #: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946 #: ../../diskdrake/interactive.pm_.c:956 #: ../../diskdrake/interactive.pm_.c:1022 msgid "Read carefully!" msgstr "Les nøye!" #: ../../diskdrake/hd_gtk.pm_.c:100 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Hvis du skal bruke aboot, være nøye med å la det være ledig plass (2048 " "sektorer er nok)\n" "ved begynnelsen av disken" #: ../../diskdrake/hd_gtk.pm_.c:154 msgid "Wizard" msgstr "Wizard" #: ../../diskdrake/hd_gtk.pm_.c:187 msgid "Choose action" msgstr "Velg handling" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Du har en stor FAT partisjon\n" "(vanligvis brukt av Microsoft Dos/Windows).\n" "Jeg forslår at du først endrer størrelsen på denne partisjonen\n" "(klikk på den, klikk så på \"Endre størrelse\")" #: ../../diskdrake/hd_gtk.pm_.c:194 msgid "Please click on a partition" msgstr "Vennligst klikk på en partisjon" #: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:464 msgid "Details" msgstr "Detaljer" #: ../../diskdrake/hd_gtk.pm_.c:254 msgid "No hard drives found" msgstr "Ingen harddisker funnet" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Journalised FS" msgstr "Journal filsystem" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Swap" msgstr "Veksel" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118 msgid "Empty" msgstr "Tom" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324 #: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165 #: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719 msgid "Other" msgstr "Andre" #: ../../diskdrake/hd_gtk.pm_.c:330 msgid "Filesystem types:" msgstr "Filsystemtyper:" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414 msgid "Create" msgstr "Opprett" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66 msgid "Type" msgstr "Type" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349 #, c-format msgid "Use ``%s'' instead" msgstr "Bruk ``%s'' istedet" #: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401 msgid "Delete" msgstr "Slett" #: ../../diskdrake/hd_gtk.pm_.c:353 msgid "Use ``Unmount'' first" msgstr "Bruk ``Demonter'' først" #: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Etter endring av type på partisjon %s, vil alle data på denne partisjonen gå " "tapt" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose a partition" msgstr "Velg en partisjon" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose another partition" msgstr "Velg en annen partisjon" #: ../../diskdrake/interactive.pm_.c:202 msgid "Exit" msgstr "Avslutt" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to expert mode" msgstr "Skift til ekspertmodus" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to normal mode" msgstr "Skift til normalmodus" #: ../../diskdrake/interactive.pm_.c:228 msgid "Undo" msgstr "Angre" #: ../../diskdrake/interactive.pm_.c:247 msgid "Continue anyway?" msgstr "Fortsette likevel?" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without saving" msgstr "Avslutt uten å lagre" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without writing the partition table?" msgstr "Avslutt uten å skrive partisjonstabellen?" #: ../../diskdrake/interactive.pm_.c:257 msgid "Do you want to save /etc/fstab modifications" msgstr "Ønsker du å lagre modifiseringen av /etc/fstab" #: ../../diskdrake/interactive.pm_.c:271 msgid "Clear all" msgstr "Fjern alle" #: ../../diskdrake/interactive.pm_.c:272 msgid "Auto allocate" msgstr "Automatisk allokering" #: ../../diskdrake/interactive.pm_.c:273 #: ../../install_steps_interactive.pm_.c:220 msgid "More" msgstr "Mer" #: ../../diskdrake/interactive.pm_.c:278 msgid "Hard drive information" msgstr "Harddisk informasjon" #: ../../diskdrake/interactive.pm_.c:310 msgid "All primary partitions are used" msgstr "Alle primære partisjoner er i bruk" #: ../../diskdrake/interactive.pm_.c:311 msgid "I can't add any more partition" msgstr "Jeg kan ikke legge til flere partisjoner" #: ../../diskdrake/interactive.pm_.c:312 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "For å ha flere partisjoner vennligst slett en for å kunne opprette en " "utvidet partisjon" #: ../../diskdrake/interactive.pm_.c:322 msgid "Save partition table" msgstr "Lagre partisjonstabeller" #: ../../diskdrake/interactive.pm_.c:323 msgid "Restore partition table" msgstr "Redde partisjonstabell" #: ../../diskdrake/interactive.pm_.c:324 msgid "Rescue partition table" msgstr "Nødpartisjonstabell" #: ../../diskdrake/interactive.pm_.c:326 msgid "Reload partition table" msgstr "Last partisjonstabell på nytt" #: ../../diskdrake/interactive.pm_.c:331 msgid "Removable media automounting" msgstr "Fjernbart media automontering" #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360 msgid "Select file" msgstr "Velg fil" #: ../../diskdrake/interactive.pm_.c:347 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Kopien av partisjonstabellen har ikke samme størrelse\n" "Fortsette for det?" #: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202 #: ../../network/modem.pm_.c:95 msgid "Warning" msgstr "Advarsel" #: ../../diskdrake/interactive.pm_.c:362 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Sett inn en diskett i stasjonen\n" "Alle data på denne disketten vil gå tapt" #: ../../diskdrake/interactive.pm_.c:373 msgid "Trying to rescue partition table" msgstr "Prøver å redde partisjonstabell" #: ../../diskdrake/interactive.pm_.c:379 msgid "Detailed information" msgstr "Detaljert informasjon" #: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674 msgid "Resize" msgstr "Endre størrelse" #: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727 msgid "Move" msgstr "Flytt" #: ../../diskdrake/interactive.pm_.c:396 msgid "Format" msgstr "Formater" #: ../../diskdrake/interactive.pm_.c:398 msgid "Add to RAID" msgstr "Legg til RAID" #: ../../diskdrake/interactive.pm_.c:399 msgid "Add to LVM" msgstr "Legg til LVM" #: ../../diskdrake/interactive.pm_.c:402 msgid "Remove from RAID" msgstr "Fjern fra RAID" #: ../../diskdrake/interactive.pm_.c:403 msgid "Remove from LVM" msgstr "Fjern fra LVM" #: ../../diskdrake/interactive.pm_.c:404 msgid "Modify RAID" msgstr "Modifiser RAID" #: ../../diskdrake/interactive.pm_.c:405 msgid "Use for loopback" msgstr "Bruk for loopback" #: ../../diskdrake/interactive.pm_.c:445 msgid "Create a new partition" msgstr "Opprette en ny partisjon" #: ../../diskdrake/interactive.pm_.c:448 msgid "Start sector: " msgstr "Start sektor: " #: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827 msgid "Size in MB: " msgstr "Størrelse i MB: " #: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828 msgid "Filesystem type: " msgstr "Filsystemtype: " #: ../../diskdrake/interactive.pm_.c:456 msgid "Preference: " msgstr "Valg: " #: ../../diskdrake/interactive.pm_.c:481 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm_.c:511 msgid "Remove the loopback file?" msgstr "Fjern loopbackfilen?" #: ../../diskdrake/interactive.pm_.c:541 msgid "Change partition type" msgstr "Endre partisjonstype" #: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "Hvilket filsystem ønsker du?" #: ../../diskdrake/interactive.pm_.c:548 msgid "Switching from ext2 to ext3" msgstr "Bytter fra ext2 til ext3" #: ../../diskdrake/interactive.pm_.c:578 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Hvor vil du montere loopback-filen %s?" #: ../../diskdrake/interactive.pm_.c:579 #, c-format msgid "Where do you want to mount device %s?" msgstr "Hvor vil du montere %s enheten?" #: ../../diskdrake/interactive.pm_.c:585 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n" "loopback. Fjern loopback først" #: ../../diskdrake/interactive.pm_.c:606 #, c-format msgid "Where do you want to mount %s?" msgstr "Hvor vil du montere %s?" #: ../../diskdrake/interactive.pm_.c:630 msgid "Computing FAT filesystem bounds" msgstr "Beregner fat filsystemgrense" #: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "Endrer størrelse" #: ../../diskdrake/interactive.pm_.c:662 msgid "This partition is not resizeable" msgstr "Denne partisjonen kan ikke størrelsen forandres på" #: ../../diskdrake/interactive.pm_.c:667 msgid "All data on this partition should be backed-up" msgstr "Alle data på denne partisjonen burde sikkerhetskopieres" #: ../../diskdrake/interactive.pm_.c:669 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Etter endring av størrelse for partisjon %s, vil alle data på denne\n" "partisjonen vil gå tapt" #: ../../diskdrake/interactive.pm_.c:674 msgid "Choose the new size" msgstr "Velg den nye størrelsen" #: ../../diskdrake/interactive.pm_.c:675 msgid "New size in MB: " msgstr "Ny størrelse i MB: " #: ../../diskdrake/interactive.pm_.c:728 msgid "Which disk do you want to move it to?" msgstr "Hvilken disk vil du flytte til?" #: ../../diskdrake/interactive.pm_.c:729 msgid "Sector" msgstr "Sektor" #: ../../diskdrake/interactive.pm_.c:730 msgid "Which sector do you want to move it to?" msgstr "Hvilken sektor vil du flytte til?" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving" msgstr "Flytter" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving partition..." msgstr "Flytter partisjon..." #: ../../diskdrake/interactive.pm_.c:750 msgid "Choose an existing RAID to add to" msgstr "Velg en eksisterende RAID for å legge til" #: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768 msgid "new" msgstr "ny" #: ../../diskdrake/interactive.pm_.c:766 msgid "Choose an existing LVM to add to" msgstr "Velg en eksisterende LVM for å legge til" #: ../../diskdrake/interactive.pm_.c:771 msgid "LVM name?" msgstr "LVM navn?" #: ../../diskdrake/interactive.pm_.c:812 msgid "This partition can't be used for loopback" msgstr "Denne partisjonen kan ikke brukes for loopback" #: ../../diskdrake/interactive.pm_.c:825 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm_.c:826 msgid "Loopback file name: " msgstr "Loopback filnavn: " #: ../../diskdrake/interactive.pm_.c:831 msgid "Give a file name" msgstr "Gi ett filnavn" #: ../../diskdrake/interactive.pm_.c:834 msgid "File already used by another loopback, choose another one" msgstr "Filen blir allerede brukt av en annen loopback, velg en annen" #: ../../diskdrake/interactive.pm_.c:835 msgid "File already exists. Use it?" msgstr "Filen eksisterer allerede. Bruke denne?" #: ../../diskdrake/interactive.pm_.c:858 msgid "Mount options" msgstr "Monteringsvalg:" #: ../../diskdrake/interactive.pm_.c:865 msgid "Various" msgstr "Diverse" #: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76 msgid "device" msgstr "enhet" #: ../../diskdrake/interactive.pm_.c:930 msgid "level" msgstr "nivå" #: ../../diskdrake/interactive.pm_.c:931 msgid "chunk size" msgstr "skivestørrelse" #: ../../diskdrake/interactive.pm_.c:947 msgid "Be careful: this operation is dangerous." msgstr "Vær forsiktig: denne operasjonen er farlig." #: ../../diskdrake/interactive.pm_.c:962 msgid "What type of partitioning?" msgstr "Hva slags type partisjonering?" #: ../../diskdrake/interactive.pm_.c:978 #, c-format msgid "The package %s is needed. Install it?" msgstr "Pakken %s trengs. Installere den?" #: ../../diskdrake/interactive.pm_.c:992 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Beklager, jeg vil ikke tillate oppretting av /boot så lange inne på disken " "(på en sylinder > 1024).\n" "Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du " "trenger ikke /boot" #: ../../diskdrake/interactive.pm_.c:996 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Partisjonen du valgte å legge til som root (/) er lokalisert fysisk " "bortenfor\n" "den 1024'de sylinderen på hard-disken, og du har ingen /boot partisjon.\n" "Hvis du skal bruke oppstartshåndtereren LILO, vær nøye med å legge til en\n" "/boot partisjon" #: ../../diskdrake/interactive.pm_.c:1002 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Du har valgt en programvare RAID partisjon som root (/).\n" "Ingen oppstartslaster kan håndtere dette uten en /boot partisjon.\n" "Så vær nøye med å legge til en /boot partisjon" #: ../../diskdrake/interactive.pm_.c:1022 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!" #: ../../diskdrake/interactive.pm_.c:1026 msgid "You'll need to reboot before the modification can take place" msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft" #: ../../diskdrake/interactive.pm_.c:1037 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Etter formatering av partisjon %s vil alle data på denne partisjonen\n" "gå tapt" #: ../../diskdrake/interactive.pm_.c:1039 msgid "Formatting" msgstr "Formatering" #: ../../diskdrake/interactive.pm_.c:1040 #, c-format msgid "Formatting loopback file %s" msgstr "Formaterer loopback-fil %s" #: ../../diskdrake/interactive.pm_.c:1041 #: ../../install_steps_interactive.pm_.c:466 #, c-format msgid "Formatting partition %s" msgstr "Formaterer partisjon %s" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Hide files" msgstr "Gjem filer" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Move files to the new partition" msgstr "Flytt filer til en ny partisjon" #: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Katalogen %s inneholder allerede noe data\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1064 msgid "Moving files to the new partition" msgstr "Flytt filer til en ny partisjon" #: ../../diskdrake/interactive.pm_.c:1068 #, c-format msgid "Copying %s" msgstr "Kopierer %s" #: ../../diskdrake/interactive.pm_.c:1072 #, c-format msgid "Removing %s" msgstr "Fjerner %s" #: ../../diskdrake/interactive.pm_.c:1082 #, c-format msgid "partition %s is now known as %s" msgstr "partisjon %s er nå kjent som %s" #: ../../diskdrake/interactive.pm_.c:1103 #: ../../diskdrake/interactive.pm_.c:1162 msgid "Device: " msgstr "Enhet: " #: ../../diskdrake/interactive.pm_.c:1104 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS diskbokstav: %s (bare en gjetning)\n" #: ../../diskdrake/interactive.pm_.c:1108 #: ../../diskdrake/interactive.pm_.c:1116 #: ../../diskdrake/interactive.pm_.c:1181 msgid "Type: " msgstr "Type: " #: ../../diskdrake/interactive.pm_.c:1112 msgid "Name: " msgstr "Navn: " #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "Start: sector %s\n" msgstr "Start: sektor %s\n" #: ../../diskdrake/interactive.pm_.c:1121 #, c-format msgid "Size: %s" msgstr "Størrelse: %s" #: ../../diskdrake/interactive.pm_.c:1123 #, c-format msgid ", %s sectors" msgstr ", %s sektorer" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Cylinder %d to %d\n" msgstr "Sylinder %d til %d\n" #: ../../diskdrake/interactive.pm_.c:1126 msgid "Formatted\n" msgstr "Formatert\n" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Not formatted\n" msgstr "Ikke formatert\n" #: ../../diskdrake/interactive.pm_.c:1128 msgid "Mounted\n" msgstr "Montert\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback-fil(er): \n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partisjon startet opp som standard\n" " (for MS-DOS oppstart, ikke for lilo)\n" #: ../../diskdrake/interactive.pm_.c:1134 #, c-format msgid "Level %s\n" msgstr "Nivå %s\n" #: ../../diskdrake/interactive.pm_.c:1135 #, c-format msgid "Chunk size %s\n" msgstr "Skivestørrelse %s\n" #: ../../diskdrake/interactive.pm_.c:1136 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-disker %s\n" #: ../../diskdrake/interactive.pm_.c:1138 #, c-format msgid "Loopback file name: %s" msgstr "Loopback filnavn: %s" #: ../../diskdrake/interactive.pm_.c:1141 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "Det er store sjanser for at\n" "denne partisjonen er en\n" "driverpartisjon, du bør nok\n" "la den være i fred.\n" #: ../../diskdrake/interactive.pm_.c:1144 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Denne spesielle Bootstrap-\n" "partisjonen er for å\n" "dual-boote ditt system.\n" #: ../../diskdrake/interactive.pm_.c:1163 msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm_.c:1164 #, c-format msgid "Size: %s\n" msgstr "Størrelse: %s\n" #: ../../diskdrake/interactive.pm_.c:1165 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n" #: ../../diskdrake/interactive.pm_.c:1166 msgid "Info: " msgstr "Info: " #: ../../diskdrake/interactive.pm_.c:1167 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-disker %s\n" #: ../../diskdrake/interactive.pm_.c:1168 #, c-format msgid "Partition table type: %s\n" msgstr "Type partisjonstabell: %s\n" #: ../../diskdrake/interactive.pm_.c:1169 #, c-format msgid "on channel %d id %d\n" msgstr "på kanal %d id %d\n" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Filesystem encryption key" msgstr "Filsystemkrypteringsnøkkel" #: ../../diskdrake/interactive.pm_.c:1200 msgid "Choose your filesystem encryption key" msgstr "Velg din filsystemkrypteringsnøkkel" #: ../../diskdrake/interactive.pm_.c:1203 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Denne krypteringsnøkkelen er for enkel (må være minst %d tegn lang)" #: ../../diskdrake/interactive.pm_.c:1204 msgid "The encryption keys do not match" msgstr "Krypteringsnøkkelene stemmer ikke overens" #: ../../diskdrake/interactive.pm_.c:1207 msgid "Encryption key" msgstr "Krypteringsnøkkel" #: ../../diskdrake/interactive.pm_.c:1208 msgid "Encryption key (again)" msgstr "Krypteringsnøkkel (igjen)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "Endre type" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "Domene autentifisering nødvendig" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "Enda ett" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "Hvilket brukernavn" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Vennligst entre brukernavnet ditt, passordet og domenenavnet for å få " "tilgang til denne verten." #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477 msgid "Username" msgstr "Brukernavn" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "Domene" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "Søk tjenere" #: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565 #: ../../fs.pm_.c:569 ../../fs.pm_.c:573 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatering av %s mislykket" #: ../../fs.pm_.c:610 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Jeg vet ikke hvordan formatere %s i type %s" #: ../../fs.pm_.c:684 ../../fs.pm_.c:727 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "montere partisjon %s i katalog %s gikk ikke" #: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599 #, c-format msgid "error unmounting %s: %s" msgstr "feil ved demontering av %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "enkel" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "med /usr" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "server" #: ../../fsedit.pm_.c:240 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n" "Jeg kan forsøke å blanke ut dårlige partisjoner (ALLE DATA vil gå tapt!)\n" "Den andre løsningen er å ikke la DrakX modifisere partisjonstabellen.\n" "(feilen er %s)\n" "\n" "Vil du miste alle partisjonene?\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB" #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB" #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "Monteringspunkter må begynne med /" #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s" #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "Denne katalogen bør forbli i root filsystemet" #: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Du trenger et virkelig filsystem (ext2, reiserfs, xfs eller jfs) for dette " "monteringspunktet\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Du kan ikke bruke ett kryptert filsystem som monteringspunkt %s" #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "Ikke nok plass for auto-allokering" #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "Ingenting å gjøre" #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "Feil ved åpning av %s for skriving: %s" #: ../../harddrake/data.pm_.c:71 msgid "cpu /* " msgstr "" #: ../../harddrake/sound.pm_.c:170 msgid "No alternative driver" msgstr "Ingen alternativ driver" #: ../../harddrake/sound.pm_.c:171 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Det er ingen OSS/ALSA alternative drivere for lydkortet ditt (%s) som nå " "bruker \"%s\"" #: ../../harddrake/sound.pm_.c:173 msgid "Sound configuration" msgstr "Lydkonfigurasjon" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Her kan du velge en alternativ driver (enten OSS eller ALSA) for lydkortet " "ditt (%s)." #: ../../harddrake/sound.pm_.c:176 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Kortet ditt bruker nå %s\"%s\" driveren (standard driver for kortet ditt er " "\"%s\")" #: ../../harddrake/sound.pm_.c:178 msgid "Driver:" msgstr "Driver:" #: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303 #: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911 #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030 #: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078 #: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134 #: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690 msgid "Help" msgstr "Hjelp" #: ../../harddrake/sound.pm_.c:185 msgid "Switching between ALSA and OSS help" msgstr "Endrer mellom ALSA og OSS hjelp" #: ../../harddrake/sound.pm_.c:186 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm_.c:202 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "Den gamle \"%s\" driveren er svartelistet.\n" "\n" "Den har blitt rapportert at den oopser kjernen når den slåes av.\n" "\n" "Den nye \"%s\" driveren vil bare bli brukt på neste bootstrap." #: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298 msgid "Please Wait... Applying the configuration" msgstr "Vennligst vent . . . Setter konfigurasjonen på plass" #: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382 #: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113 #: ../../standalone/service_harddrake_.c:64 msgid "Please wait" msgstr "Vennligst vent" #: ../../harddrake/sound.pm_.c:210 msgid "No known driver" msgstr "Ingen kjent driver" #: ../../harddrake/sound.pm_.c:211 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Det er ingen kjent driver for lydkortet ditt (%s)" #: ../../harddrake/sound.pm_.c:214 msgid "Unkown driver" msgstr "Ukjent driver" #: ../../harddrake/sound.pm_.c:215 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "\n" "with subject: unlisted sound driver \"%s\"" msgstr "" "\"%s\" driveren for lydkortet ditt er ikke listet\n" "\n" "Vennligst send utskrift av \"lspcidrake -v\" kommandoen til\n" "\n" "med subject: unlisted sound driver \"%s\"" #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 msgid "Auto-detect" msgstr "Automatisk detektering" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198 msgid "Unknown|Generic" msgstr "Ukjent|Generisk" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Ukjent|CPH05X (bt878) [mange leverandører]" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Ukjent|CPH06X (bt878) [mange leverandører]" #: ../../harddrake/v4l.pm_.c:224 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:227 #, fuzzy msgid "Card model:" msgstr "Kort mem (DMA)" #: ../../harddrake/v4l.pm_.c:228 #, fuzzy msgid "Tuner type:" msgstr "Endre type" #: ../../harddrake/v4l.pm_.c:229 msgid "Number of capture buffers:" msgstr "" #: ../../harddrake/v4l.pm_.c:229 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:231 #, fuzzy msgid "PLL setting:" msgstr "Formatering" #: ../../harddrake/v4l.pm_.c:232 msgid "Radio support:" msgstr "" #: ../../harddrake/v4l.pm_.c:232 msgid "enable radio support" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" "GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha " "sine\n" "instillinger, sine egne filer osv. Du kan lese brukerguiden for å få vite " "mer.\n" "Men i motsetning til root, som er administratoren, så vil brukerene du " "legger til\n" "her ikke ha rett til å forandre noe annet enn deres egne filer " "ogkonfigurasjon.\n" "Du må lage minst en bruker for deg selv.\n" "Denne kontoen bør du bruke for all rutinebruk. Selv om det er praktisk å " "logge\n" "inn som root hver dag, kan deg også være veldig farlig! Den minste feil " "kunne\n" "bety at systemet ditt ikke lenger virker. Hvis du gjør en stor feil som en " "vanlig\n" "bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n" "\n" "Først må du skrive inn ditt virkelige navn. Dette er ikke nødvendig, da du " "kan\n" "skrive inn hva du vil. drakX vil ta det første ordet du legger inn og " "foreslå det som\n" "brukernavn. Dette er det brukernavnet den brukeren vil bruke for å logge seg " "på\n" "systemet. Du kan forandre det. Du må legge inn ett passord her. En " "ikkepriviligert\n" "brukers passord er ikke så viktig som root sitt sett i fra " "systemsikkerhetens side,\n" "men det er ingen grunn til ignorere det av den grunn, det er dine filer som " "er i \n" "faresonen.\n" "\n" "Hvis du klikker på aksepter bruker kan du da legge til så mange brukere som " "du\n" "vil. Når du har lagt til alle de brukerene du ønsker, klikk på ferdig.\n" "\n" "Ved å klikke på avansert kan du forandre hvilket shell brukeren har som " "standard.\n" "(Det vanlige er bash)" #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Ovenfor nevnes de eksisterende Linux partisjonene oppdaget på\n" "harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode " "for vanlig\n" "bruk. Du kan endre disse valgene, du må i hvertfall definere en root\n" "partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke kunne\n" "installere nok programvare. Hvis du ønsker å lagre dine data på en separat " "partisjon\n" "må du også velge en \"/home\" (bare mulig hvis du har mer enn en\n" "Linux partisjon tilgjengelig).\n" "\n" "\n" "For informasjon, hver partisjon er listet som følger: \"Navn\", \"Kapasitet" "\".\n" "\n" "\n" "\"Navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n" "\"partisjon nummer\" (f.eks., \"hda1\").\n" "\n" "\n" "\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd" "\"\n" "hvis den er en SCSI harddisk.\n" "\n" "\n" "\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med " "IDE harddisker:\n" "\n" " * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n" "\n" " * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n" "\n" " * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n" "\n" " * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n" "\n" "\n" "Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr " "\"sekundær harddisk\", etc..." #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n" "vet om en pakke er på en annen CDROM og vil spytte ut den våværende\n" "CD og be deg sette i en annen en ved behov." #: ../../help.pm_.c:84 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "Det er nå på tide å spesifisere hvilke programmer du ønsker å installere på\n" "systemet ditt. Det er tusenvis av pakker tilgjengelig for Mandrake Linux, og " "det er ikke meningen at du skal kunne navnet på samtlige.\n" "\n" "Hvis du utfører en standard installasjon fra CDROM, vil du først bli bedt " "om\n" "å spesifisere de CDene du har for øyeblikket (kun i ekspertmodus). Sjekk " "CDene\n" "og velg de bokser som tilsvarer de CDer som du har klare for installasjon.\n" "Klikk \"OK\" når du er klar til å fortsette.\n" "\n" "Pakkene er delt inn i grupper som korresponderer til typisk bruk av din " "maskin\n" "Gruppene er igjen delt inn i fire seksjoner:\n" "\n" " * \"Arbeidsstasjon\": hvis du planlagger å bruke din maskin som " "arbeidsstasjon, velg\n" "en eller flere av de tilhørende grupper.\n" "\n" " * \"Utvikling\": hvis maskinen skal brukes til programmering, velg ønskede " "grupper.\n" "\n" " * \"Server\": Hvis maskinen skal brukes som server, vil du kunne velge\n" "hvilke av de mest vanlige tjenester som du ønsker installert på\n" "maskinen.\n" "\n" " * \"Grafisk miljø\": til slutt, det er her du kan velge ditt ønskede\n" "grafiske miljø. Du må velge minst ett hvis du ønsker å ha en grafisk\n" "arbeidsstasjon!\n" "\n" "Ved å flytte musepekeren over et gruppenavn vil en kort forklarende tekst\n" "dukke opp over den gruppen. Hvis du ønsker å ikke velge noen grupper under\n" "installasjon (og du ikke oppgraderer), så vil en dialog spørre deg om hva\n" "slags minimal installasjon du ønsker:\n" "\n" "* \"Med X\" For en minste installasjon med X-tjener inkludert;\n" "\n" " * \"With basic documentation\" Installerer basesystemet pluss standard\n" "verktøy og dokumentasjon for disse. Denne installasjonen passer til å sette\n" "opp en server.\n" "\n" " * \"Truly minimal install\" vil installere minimum som er nødvendig for å\n" "Linux systemet opp og gå, kun kommandolinje. Denne installasjonen er på\n" "rundt 65Mb.\n" "\n" "Du kan merke av \"Individual package selection\" boksen, som er nyttig\n" "hvis du kjenner til pakkene som blir tilbydt eller hvis du ønsker å ha\n" "total kontroll over hva som vil bli installert.\n" "\n" "Hvis du startet installasjonen i \"Upgrade\" modus, kan du velge vekk alle\n" "grupper for å unngå å installere noen nye pakker. Dette er nyttig for\n" "reparasjon eller oppdatering av et eksisterende system." #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" "Til slutt, avhengig av ditt valg av om du vil velge enkeltpakker eller\n" "ikke, så vil du få se ett tre som inneholder alle pakkene sortert på " "grupper\n" "og undergrupper. Når du surfer gjennom treet, kan du velge grupper, \n" "undergrupper eller individuelle pakker.\n" "\n" "Når du velger en pakke i treet, vil en beskrivelse dukke opp til høyre. \n" "Når du er ferdig med å velge, klikk \"Installer\" knappen som da vil starte\n" "installasjonsprosessen. Avhengig av hastigheten på din maskin, og antall\n" "pakker som skal installeres, kan det ta en stund å gjøre ferdig " "installasjonen.\n" "Ett estimat på hvor lang tid det vil ta vises på skjermen for å hjelpe deg " "å\n" "avgjøre om du har tid til en kopp kaffe.\n" "\n" "!! Hvis en tjenerpakke har blitt valgt, vil du bli bedt om å bekrefte at du " "ønsker\n" "å installere denne. Under Mandrake Linux vil alle installerte tjenere bli \n" "startet ved oppstart. Selv om de er sikre og ikke har noen kjente " "sikkerhetshull\n" "når denne distribusjonen ble sluppet, så kan det være at sikkerhetshull " "ble \n" "oppdaget etter at denne versjonen av Mandrake Linux ble sluppet. Hvis du\n" "ikke vet hva en type tjene gjør, eller hvorfor den blir installert, klikk " "\"Nei\".\n" "\"Ja\" vil installere tjeneren(e) og de(n) vil bli started automatisk som " "standard.\n" "\n" "\"Automatiske avhengigheter\" valget bare fjerner advarselsdialogboksen som\n" "kommer når installasjonsprogrammet automatisk velger en pakke. Dette skjer " "fordi\n" "den har funnet ut at den må tilfredsstille en avhengighet med en annen pakke " "for\n" "å fullstendig gjennomføre installasjonen.\n" "\n" "Det lille diskettikonet på bunnen av listen lar deg laste pakkelisten som du " "valgte\n" "under en tidligere installasjon. Når du klikker på dette ikonet vil du bli " "bedt om å\n" "sette inn disketten som ble laget under avslutningen av en annen " "installasjon. Se\n" "det andre tipset for det siste skrittet for hvordan lage en slik diskett." #: ../../help.pm_.c:171 msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" #: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" #: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" #: ../../help.pm_.c:277 msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "Før du går videre bør du lese lisensen nøye.\n" "Den dekker hele Mandrake Linux distribusjonen og hvis du ikke er enig\n" "med alt den sier, klikk på \"Jeg nekter\" knappensom øyeblikkelig\n" "avslutter installasjonen. For å fortsette installasjonen, klikk på\n" "\"Jeg aksepterer\" knappen." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "På dette punktet er det tid for å velge sikkerhetsnivået som passer for\n" "maskinen. Som en tommelfingerregel, jo mere utsatt maskinen er, og jo mere\n" "viktig data som er lagret der, jo høyere bør sikkerhetsnivået være.\n" "Men, et høyere sikkerhetsnivå går gjerne på beskostning av " "brukvennligheten.\n" "Se i MSEC kapittelet i ``Reference Manual'' for å få mer informasjon om\n" "disse nivåene.\n" "\n" "Hvis du ikke vet hva du skal velge, behold standard valg." #: ../../help.pm_.c:442 #, fuzzy msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "På dette punktet må du velge hvilken\n" "partisjon(er) som skal brukes til å installere ditt nye Mandrake Linux " "system. Hvis partisjoner\n" "allerede har blitt definert (fra en tidligere installasjon av GNU/Linux " "eller fra\n" "et annet partisjoneringsverktøy), kan du bruke eksisterende partisjoner. I " "andre tilfeller\n" "må harddiskpartisjoner defineres.\n" "\n" "\n" "For å opprette partisjoner må du først velge en harddisk. Du kan velge disk\n" "for partisjonering ved å klikke på \"hda\" for den første IDE disken, \"hdb" "\" for\n" "den andre eller \"sda\" for den første SCSI disken osv.\n" "\n" "\n" "For å partisjonere den valgte harddisken kan du bruke disse valgene:\n" "\n" " * Fjern alle: dette valget sletter alle partisjoner tilgjengelig på den " "valgte harddisken.\n" "\n" "\n" " * Auto allokering:: dette valget lar deg automatisk opprette Ext2 og " "veksel partisjoner på den ledige plassen på\n" " harddisken din.\n" "\n" "\n" " * Redd partisjonstabell: hvis partisjonstabellen din er skadet kan du " "forsøke å redde den ved å bruke dette valget. Vær\n" " forsiktig og husk at det kan gå galt.\n" "\n" "\n" " * Angre: du kan bruke dette valget til kanselere endringene dine.\n" "\n" "\n" " * Last igjen: du kan bruke dette valget hvis du angrer alle endringer og " "vil laste partisjonstabellen du begynte med\n" "\n" "\n" " * Veiviser: Hvis du ønsker å bruke en hjelper til å partisjonere " "harddisken din kan du bruke dette valget. Anbefales hvis\n" " du ikke har god kunnskap om partisjonering.\n" "\n" "\n" " * Gjenopprett fra diskett: hvis du har lagret partisjonstabellen din på " "en diskett under en tidligere installasjon kan du\n" " gjenopprette denne ved å bruke dette valget.\n" "\n" "\n" " * Lagre på diskett: hvis du ønsker å lagre partisjonstabellen din på en " "diskett for å kunne gjenopprette denne kan du bruke dette\n" " valget. Det anbefales på det sterkeste å bruke dette valget.\n" "\n" "\n" " * Ferdig: når du er ferdig med å partisjonere harddisken din bruk dette " "valget til å lagre endringene dine.\n" "\n" "\n" "For informasjon kan du nå valgene ved å bruke tastaturet: naviger gjennom " "partisjonene ved å bruke Tab og Up/Down pilene.\n" "\n" "\n" "Når en partisjon er valgt kan du bruke:\n" "\n" " * Ctrl-c til å opprette en ny partisjon (når en tom partisjon er " "valgt)\n" "\n" " * Ctrl-d til å slette en partisjon\n" "\n" " * Ctrl-m til å sette monteringspunktet\n" ".............\n" "\n" ".............\n" "Hvis du installerer på en PPV maskin, så vil du nok lage en liten " "HFS'bootstrap-partisjon' på minst en megabyte for bruk\n" "av yaboot oppstartslasteren. Hvis du ønsker å lage partisjonen litt større, " "laoss si 50 MB, så kan du kanskje lagre en ekstra kjene og ramdiskbilde for " "nødsituasjoner." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Mer enn en Microsoft Windows partisjon har blitt\n" "oppdaget på harddisken din. Vennligst velg den du ønsker å endre størrelsen " "på for å\n" "installere ditt nye Mandrake Linux operativsystem.\n" "\n" "\n" "For informasjon, hver partisjon er listet som følger: \"Linux navn\", " "\"Windows\n" "navn\" \"Kapasitet\".\n" "\n" "\"Linux navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n" "\"partisjon nummer\" (f.eks., \"hda1\").\n" "\n" "\n" "\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd" "\"\n" "hvis den er en SCSI harddisk.\n" "\n" "\n" "\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med " "IDE harddisker:\n" "\n" " * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n" "\n" " * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n" "\n" " * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n" "\n" " * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n" "\n" "Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr " "\"sekundær harddisk\", etc.\n" "\n" "\"Windows navn\" er bokstaven på harddisken din under Windows (den første " "disken\n" "eller partisjonen er kalt \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "Vær tålmodig. Denne operasjonen kan ta flere minutter." #: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Vennligst velg den riktige porten. F.eks., \"COM1\" porten under\n" "Windows blir kalt \"ttyS0\" i GNU/Linux." #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "LILO (LInux LOader) og Grub er oppstartslastere: de kan starte opp enten\n" "GNU/Linux eller et annet operativsystem som du har på datamaskinen din.\n" "Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n" "Hvis dette ikke er tilfelle, kan du legge til disse for hånd i dette\n" "bildet. Vær nøye med å velge de korrekte parameterene.\n" "\n" "Hvis du ikke ønsker å gi tilgang til de andre operativsystemene til\n" "andre kan du fjerne linjene for disse. Men i så tilfelle trenger du\n" "en oppstartsdiskett for å starte disse!" #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "Du må indikere hvor du ønsker å\n" "plassere informasjonen som behøves for oppstart av GNU/Linux.\n" "\n" "Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n" "disken (MBR)\"." #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" #: ../../help.pm_.c:759 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" #: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n" "andre kjerner, eller for ett nødbootspeil.\n" "\n" "For andre OS består inngangen bare av et navn og rotpartisjonen\n" "\n" "For Linux er det et par mulige valg:\n" "\n" " * Label: Dette er navnet du vil skrive ved yaboot klartegnet for å velge\n" "dette oppstartsvalget.\n" "\n" " * Image: Dette er navnet på kjernen for oppstart. Typisk vmlinux\n" "eller en variasjon av vmlinux med en utvidelse.\n" "\n" " * Root: \"root\" enheten eller \"/\" for Linux installasjonen din.\n" "\n" " * Append: På Apple maskinvare er kjerneopsjonen append ofte brukt til\n" "å assistere i initialisering av video maskinvare, eller til å slå på " "tastatur\n" "museknapp emulering for de ofte manglende andre og tredje museknappene på " "en\n" "Apple mus. Her er noen eksempler:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: Dette valget kan brukes enten til å laste initiale moduler, før\n" "oppstartsenheten er tilgengelig, eller til å laste et ramdisk-bilde for en\n" "nødoppstart situasjon.\n" "\n" " * Initrd-size: Standard ramdisk størrelse er vanligvis 4,096 bytes. Hvis " "du\n" "trenger å allokere en stor ramdisk, kan dette valget brukes.\n" "\n" " * Read-write: Normalt kommer \"root\" partisjonen opp som read-only for å\n" "la et filsystem sjekke for systemet system blir \"live\".\n" "Her kan du overstyre dette valget.\n" "\n" " * NoVideo: Skulle Apple video maskinvaren vise seg å være veldig\n" "problematisk, kan du velge dette valget for å starte i \"novideo\" modus, " "med\n" "egen framebuffer støtte.\n" "\n" " * Default: Velger denne inngangen som standard Linux valg, og kan velges\n" "ved å trykke ENTER ved yaboot klartegnet. Denne inngangen vil også bli\n" "fremhevet med en \"*\", hvis du trykker [Tab] for å se oppstarts-\n" "valgene." #: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot er en oppstartslaster for NewWorld MacIntosh maskinvare. Den kan\n" "starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede på din\n" "datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget\n" "og installert. Hvis dette ikke skulle være tilfelle kan du legge til " "endringer\n" "her. Vær forsiktig når du velger de korrekte parametre.\n" "\n" "Yaboots hovedvalg er:\n" "\n" "\n" " * Init beskjed: En enkel melding som vises før oppstartsprosessen starter.\n" "\n" " * Oppstartsenhet: Indikerer hvor du ønsker å plassere informasjonen som " "trengs\n" "for å starte GNU/Linux. Du vil generelt ha satt opp en bootstrap-partisjon\n" "tidligere for å ta vare på denne informasjonen.\n" "\n" " * Åpne firmwareforsinkelse: Ulikt LILO så er det to forsinkelser\n" "som er tilgjengelig med yaboot. Den første forsinkelsen blir målt i\n" "sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n" "MacOS eller Linux.\n" "\n" " * Kjerneboot Timeout: Denne er lik LILO oppstartsforsinkelse.\n" "Etter å ha valgt Linux, vil du ha 0,1 sekunder før standard kjerne\n" "blir valgt.\n" "\n" " * Aktiver CD Boot?: Hvis du velger dette valget vil du kunne\n" "trykke \"C\" for CD ved det første oppstartsvalget.\n" "\n" " * Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n" "trykke\n" "\"N\" for Open Firmware ved det første oppstartsvalget.\n" "\n" " * Standard OS: Du kan velge hvilket OS som skal lastes når\n" "Open Firmwareforsinkelsen er utløpt." #: ../../help.pm_.c:860 #, fuzzy msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary.\n" "\n" " * \"Timezone\": DrakX gjetter tidssonen din ut i fra språket du\n" "har valgt. Men her, også for valget av tastatur, er du kanskje ikke\n" "i det landet som valgt språk skulle tilsi.\n" "Derfor må du kanskje klikke på \"Timezone\" knappen for å konfigurere\n" "klokken til tidssonen der du er.\n" "\n" " * \"Printer\": Klikke på \"No Printer\" knappen vil åpne skriver\n" "konfigureringshjelperen.\n" "\n" " * \"Sound card\": Hvis et lydkort blir oppdaget på systemet ditt, blir det\n" "vist her. Ingen modifisering mulig under installering.\n" "\n" " * \"TV card\": Hvis et TV-kort blir oppdaget på systemet ditt, blir det\n" "vist her. Ingen modifisering mulig under installering.\n" "\n" " * \"ISDN card\": Hvis et ISDN-kort blir oppdaget på systemet ditt, blir " "det\n" "vist her. Du kan klikke på knappen for å endre parameterene assosiert\n" "til dette." #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Velg den harddisken du ønsker å slette for å installere din nye Mandrake\n" "Linux partisjon. Vær forsiktig, alle data på denne vil gå tapt og vil ikke\n" "kunne gjenopprettes!" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Klikk på \"OK\" hvis du ønsker å slette alle data og partisjoner på denne\n" "harddisken. Vær forsiktig, etter at du har klikket på \"OK\" vil du ikke\n" "kunne gjenopprette data og partisjoner på denne harddisken inkludert " "Windows\n" "data.\n" "\n" "Klikk på \"Avbryt\" for å avbryte denne operasjonen uten å miste data og\n" "partisjoner på denne harddisken." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Kan ikke få tilgang til kjernemoduler ihht. kjernen din (fil %s mangler), " "dette betyr vanligvis at oppstartsdisketten din ikke er i synk med " "installasjonsmediet (vennligst opprett en nyere diskett)" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "Du må også formatere %s" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "D har valgt følgende tjener(e): %s\n" "\n" "\n" "Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n" "problemer, men noen nye kan bli funnet. I så tilfelle må du oppgradere\n" "så snart som mulig.\n" "\n" "\n" "Ønsker du virkelig å installere disse tjenerene?\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "Kan ikke bruke broadcast med intet NIS domene" #: ../../install_any.pm_.c:879 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Sett inn en FAT-formatert diskett i stasjon %s" #: ../../install_any.pm_.c:883 msgid "This floppy is not FAT formatted" msgstr "Denne disketten er ikke FAT-formatert" #: ../../install_any.pm_.c:895 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "For å bruke dette valget av pakker, start installasjonen med'linux " "defcfg=floppy'" #: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "Feil ved lesing av fil %s" #: ../../install_any.pm_.c:1040 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye " "filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet" #: ../../install_interactive.pm_.c:21 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Noe maskinvare i maskinen din trenger ``riktige'' drivere for å virke.\n" "Du kan finne noe informasjon om disse her: %s" #: ../../install_interactive.pm_.c:56 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Du må ha en root-partisjon.\n" "Opprett en partisjon for dette (eller klikk på en eksisterende).\n" "Velg så ``Monteringspunkt'' og sett dette til `/'" #: ../../install_interactive.pm_.c:61 msgid "You must have a swap partition" msgstr "Du må ha en vekslingspartisjon" #: ../../install_interactive.pm_.c:62 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Du har ingen vekselpartisjon\n" "\n" "Fortsette likevel?" #: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Du må ha en FAT-parisjonen montert under /boot/efi" #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "Bruk ledig plass" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "Ikke nok plass til å allokere en ny partisjon" #: ../../install_interactive.pm_.c:100 msgid "Use existing partitions" msgstr "Bruk eksisterende partisjon" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "Det finnes ingen eksisterende partisjon som kan brukes" #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "Bruk Windows partisjonen for loopback" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "Hvilken partisjon vil du bruke for Linux4Win?" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "Velg størrelsene" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "Root-partisjonsstørrelse i MB: " #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "Veksel-partisjonsstørrelse i MB: " #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "Bruk den ledige plassen på Windows partisjonen" #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "Hvilken partisjonstype ønsker du å forandre størrelse på?" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "Beregner Windows filsystemgrense" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Størrelsesendreren for FAT greide ikke å håndtere din partisjon, \n" "følgende feil oppsto: %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Windows-partisjonen din er for fragmentert, vennligst kjør ``defrag'' først" #: ../../install_interactive.pm_.c:138 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "ADVARSEL!\n" "\n" "DrakX vil nå endre størrelsen på Windows partisjonen din. Vær\n" "forsiktig: denne operasjonen er farlig. Hvis du ikke allerede har\n" "gjort det burde du først kjøre scandisk under Windows (og som en\n" "opsjon kjøre defrag) på denne partisjonen og ta sikkerhetskopi av dine " "data.\n" "Når du er sikker, trykk Ok." #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "Hvilken størrelse ønsker du å beholde vinduer på?" #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "partisjon %s" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "Krymping/forstørring av FAT feilet: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "Det finnes ingen FAT partisjon å forandre størrelsen på eller å bruke som " "loopback (ikke nok plass igjen)" #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "Slette hele disken" #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "Fjern Windows(TM)" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Du har mer enn en harddisk, hvilken ønsker du å installere linux på?" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "ALLE eksisterende partisjoner og deres data vil være tapt på disk %s" #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "Egendefinert diskpartisjonering" #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "Bruk fdisk" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Du kan nå partisjonere %s.\n" "Når du er ferdig ikke glem å lagre med `w'" #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "Du har ikke nok ledig plass på Windows partisjonen din" #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "Jeg kan ikke finne noe rom for installering" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX partisjonsveiviseren fant følgende løsninger:" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "Partisjonering feilet: %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "Henter opp nettverket" #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "Tar ned nettverket" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "En feil oppsto, men jeg vet ikke hvordan jeg skal håndtere dette på en\n" "pen måte.\n" "Fortsett på eget ansvar." #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "Dupliser monteringspunkt %s" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Noen viktige pakker ble ikke installert ordentlig.\n" "Det er noe galt enten med CD-rom'en eller CD-platen.\n" "Sjekk cd-platen på en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "Velkommen til %s" #: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769 msgid "No floppy drive available" msgstr "Ingen diskettstasjon tilgjengelig" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "Entrer trinn `%s'\n" #: ../../install_steps_gtk.pm_.c:146 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n" "ved installering av Mandrake Linux. Hvis dette skjer kan du prøve tekst- " "installering\n" "i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv så `text'." #: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237 msgid "Install Class" msgstr "Installeringsklasse" #: ../../install_steps_gtk.pm_.c:160 msgid "Please choose one of the following classes of installation:" msgstr "Vennligst velg en av følgende installasjonsklasser:" #: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683 msgid "Package Group Selection" msgstr "Valg pakkegruppe" #: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698 msgid "Individual package selection" msgstr "Individuelt pakkevalg" #: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621 #, c-format msgid "Total size: %d / %d MB" msgstr "Total størrelse: %d / %d MB" #: ../../install_steps_gtk.pm_.c:334 msgid "Bad package" msgstr "Dårlig pakke" #: ../../install_steps_gtk.pm_.c:335 #, c-format msgid "Name: %s\n" msgstr "Navn: %s\n" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Version: %s\n" msgstr "Versjon: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Size: %d KB\n" msgstr "Størrelse: %d KB\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Importance: %s\n" msgstr "Viktighet: %s\n" #: ../../install_steps_gtk.pm_.c:360 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Du kan ikke velge denne pakken da det ikke er igjen nok plass til å " "installere denne" #: ../../install_steps_gtk.pm_.c:365 msgid "The following packages are going to be installed" msgstr "Følgende pakker vil bli installert" #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be removed" msgstr "Følgende pakker vil bli fjernet" #: ../../install_steps_gtk.pm_.c:378 msgid "You can't select/unselect this package" msgstr "Du kan ikke velge/fjerne denne pakken" #: ../../install_steps_gtk.pm_.c:390 msgid "This is a mandatory package, it can't be unselected" msgstr "Dette er en bestemt pakke, den kan ikke fjernes" #: ../../install_steps_gtk.pm_.c:392 msgid "You can't unselect this package. It is already installed" msgstr "Du kan ikke fjerne denne pakken, den er allerede installert" #: ../../install_steps_gtk.pm_.c:395 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Denne pakken må oppgraderes\n" "Er du sikker på at du ikke vil velge denne?" #: ../../install_steps_gtk.pm_.c:398 msgid "You can't unselect this package. It must be upgraded" msgstr "Du kan ikke fjerne denne pakken. Den må oppgraderes" #: ../../install_steps_gtk.pm_.c:403 msgid "Show automatically selected packages" msgstr "Vis automatisk valgte pakker" #: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 #: ../../standalone/drakbackup_.c:4211 msgid "Install" msgstr "Installer" #: ../../install_steps_gtk.pm_.c:407 msgid "Load/Save on floppy" msgstr "Lagre på/hente fra diskett" #: ../../install_steps_gtk.pm_.c:408 msgid "Updating package selection" msgstr "Oppdaterer pakkevalg" #: ../../install_steps_gtk.pm_.c:413 msgid "Minimal install" msgstr "Minimal installasjon" #: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529 msgid "Choose the packages you want to install" msgstr "Velg pakkene du ønsker å installere" #: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767 msgid "Installing" msgstr "Installerer" #: ../../install_steps_gtk.pm_.c:450 msgid "Estimating" msgstr "Beregner" #: ../../install_steps_gtk.pm_.c:457 msgid "Time remaining " msgstr "Tid som gjenstår " #: ../../install_steps_gtk.pm_.c:469 msgid "Please wait, preparing installation..." msgstr "Vennligst vent, forbereder installasjon" #: ../../install_steps_gtk.pm_.c:551 #, c-format msgid "%d packages" msgstr "%d pakker" #: ../../install_steps_gtk.pm_.c:556 #, c-format msgid "Installing package %s" msgstr "Installerer pakke %s" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 #: ../../standalone/drakautoinst_.c:197 msgid "Accept" msgstr "Godta" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 msgid "Refuse" msgstr "Nekte" #: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Bytt CD!\n" "\n" "Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok når du er " "ferdig.\n" "Hvis du ikke har den trykk Avbryt for å unngå installasjon fra denne CD'en." #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612 #: ../../install_steps_interactive.pm_.c:804 #: ../../install_steps_interactive.pm_.c:808 msgid "Go on anyway?" msgstr "Fortsette uansett?" #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804 msgid "There was an error ordering packages:" msgstr "Det var en feil ved endring av pakkenes rekkefølge:" #: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808 msgid "There was an error installing packages:" msgstr "Det var en feil ved installering av pakkene:" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "En feil oppsto" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "Ønsker du virkelig å forlate installasjonen?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "License agreement" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:197 msgid "Are you sure you refuse the licence?" msgstr "" #: ../../install_steps_interactive.pm_.c:217 #: ../../install_steps_interactive.pm_.c:995 #: ../../standalone/keyboarddrake_.c:25 msgid "Keyboard" msgstr "Tastatur" #: ../../install_steps_interactive.pm_.c:218 msgid "Please choose your keyboard layout." msgstr "Vennligst velg tastatur-oppsettet ditt." #: ../../install_steps_interactive.pm_.c:219 msgid "Here is the full list of keyboards available" msgstr "Her er den komplette lista over tilgjengelige tastatur" #: ../../install_steps_interactive.pm_.c:237 msgid "Which installation class do you want?" msgstr "Hvilken installasjonsklasse ønsker du?" #: ../../install_steps_interactive.pm_.c:241 msgid "Install/Update" msgstr "Installer/Oppdater" #: ../../install_steps_interactive.pm_.c:241 msgid "Is this an install or an update?" msgstr "Er dette en installering eller en oppdatering?" #: ../../install_steps_interactive.pm_.c:250 msgid "Recommended" msgstr "Anbefalt" #: ../../install_steps_interactive.pm_.c:253 #: ../../install_steps_interactive.pm_.c:256 msgid "Expert" msgstr "Ekspert" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade" msgstr "Oppgrader" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade packages only" msgstr "Oppgrader kun pakker" #: ../../install_steps_interactive.pm_.c:282 msgid "Please choose the type of your mouse." msgstr "Vennligst velg din musetype." #: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52 msgid "Mouse Port" msgstr "Port mus" #: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53 msgid "Please choose on which serial port your mouse is connected to." msgstr "Vennligst velg hvilken serieport musen din koblet til." #: ../../install_steps_interactive.pm_.c:297 msgid "Buttons emulation" msgstr "Emulering knapper" #: ../../install_steps_interactive.pm_.c:299 msgid "Button 2 Emulation" msgstr "Emulering 2 knapper" #: ../../install_steps_interactive.pm_.c:300 msgid "Button 3 Emulation" msgstr "Emulering 3 knapper" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring PCMCIA cards..." msgstr "Konfigurerer PCMCIA kort..." #: ../../install_steps_interactive.pm_.c:321 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:328 msgid "Configuring IDE" msgstr "Konfigurerer IDE" #: ../../install_steps_interactive.pm_.c:328 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:345 msgid "No partition available" msgstr "ingen tilgjengelige partisjoner" #: ../../install_steps_interactive.pm_.c:348 msgid "Scanning partitions to find mount points" msgstr "Skanner partisjoner for å finne monteringspunkter" #: ../../install_steps_interactive.pm_.c:356 msgid "Choose the mount points" msgstr "Velg monteringspunktene" #: ../../install_steps_interactive.pm_.c:386 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for " "åboote systemet ditt, må du lage en bootstrap partisjon i DiskDrake" #: ../../install_steps_interactive.pm_.c:395 msgid "No root partition found to perform an upgrade" msgstr "Ingen rotpartisjon funnet for oppgradering" #: ../../install_steps_interactive.pm_.c:396 msgid "Root Partition" msgstr "Rotpartisjon" #: ../../install_steps_interactive.pm_.c:397 msgid "What is the root partition (/) of your system?" msgstr "Hva er rotpartisjonen (/) på ditt system?" #: ../../install_steps_interactive.pm_.c:411 msgid "You need to reboot for the partition table modifications to take place" msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft" #: ../../install_steps_interactive.pm_.c:435 msgid "Choose the partitions you want to format" msgstr "Velg partisjonene du ønsker å partisjonere" #: ../../install_steps_interactive.pm_.c:436 msgid "Check bad blocks?" msgstr "Sjekke fo rdårlige clustere?" #: ../../install_steps_interactive.pm_.c:463 msgid "Formatting partitions" msgstr "Formaterer partisjoner" #: ../../install_steps_interactive.pm_.c:465 #, c-format msgid "Creating and formatting file %s" msgstr "Lager of formaterer fila %s" #: ../../install_steps_interactive.pm_.c:470 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm_.c:472 msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Det er ikke nok SWAP til å fullføre installasjonen, vennligst legg til litt " "mer" #: ../../install_steps_interactive.pm_.c:479 #, fuzzy msgid "Looking for available packages and rebuilding rpm database..." msgstr "Søker etter tilgjengelige pakker" #: ../../install_steps_interactive.pm_.c:480 msgid "Looking for available packages..." msgstr "Søker etter tilgjengelige pakker" #: ../../install_steps_interactive.pm_.c:483 #, fuzzy msgid "Looking at packages already installed..." msgstr "Du kan ikke fjerne denne pakken, den er allerede installert" #: ../../install_steps_interactive.pm_.c:487 msgid "Finding packages to upgrade..." msgstr "Finner pakker som skal oppgraderes" #: ../../install_steps_interactive.pm_.c:505 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d " "> %d)" #: ../../install_steps_interactive.pm_.c:541 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Vennligst velg lagre eller hente pakkevalg på diskett.\n" "Formatet er det samme som for auto_install genererte disketter." #: ../../install_steps_interactive.pm_.c:543 msgid "Load from floppy" msgstr "Hent fra diskett" #: ../../install_steps_interactive.pm_.c:543 msgid "Save on floppy" msgstr "Lagre på diskett" #: ../../install_steps_interactive.pm_.c:547 msgid "Loading from floppy" msgstr "Henter fra disketten" #: ../../install_steps_interactive.pm_.c:547 msgid "Package selection" msgstr "Pakkevalg" #: ../../install_steps_interactive.pm_.c:552 msgid "Insert a floppy containing package selection" msgstr "Sett inn en diskett med pakkevalget" #: ../../install_steps_interactive.pm_.c:634 msgid "Selected size is larger than available space" msgstr "Valgt størrelse er større enn tilgjengelig plass" #: ../../install_steps_interactive.pm_.c:649 msgid "Type of install" msgstr "Type av installasjon" #: ../../install_steps_interactive.pm_.c:650 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Du har ikke valgt noen pakkegrupper.\n" "Vennligst velg den minimale installasjonen du ønsker:" #: ../../install_steps_interactive.pm_.c:653 msgid "With X" msgstr "Med X" #: ../../install_steps_interactive.pm_.c:655 msgid "With basic documentation (recommended!)" msgstr "Med grunnleggende dokumentasjon (anbefalt!)" #: ../../install_steps_interactive.pm_.c:656 msgid "Truly minimal install (especially no urpmi)" msgstr "Virkelig minimal installasjon (uten urpmi)" #: ../../install_steps_interactive.pm_.c:741 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Hvis du har alle CDene i listen nedenfor, klikk Ok.\n" "Hvis du ikke har noen av disse CDene, klikk Avbryt.\n" "Hvis bare noen av CDene mangler, fjern disse, klikk så Ok." #: ../../install_steps_interactive.pm_.c:746 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "CD-ROMen ved navnet \"%s\"" #: ../../install_steps_interactive.pm_.c:767 msgid "Preparing installation" msgstr "Forbereder installasjon" #: ../../install_steps_interactive.pm_.c:776 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Installerer pakke %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:822 msgid "Post-install configuration" msgstr "Konfigurasjon postinstallering" #: ../../install_steps_interactive.pm_.c:828 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Sett inn en oppstartsdiskett i stasjon %s" #: ../../install_steps_interactive.pm_.c:834 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Sett inn oppdater moduler disketten i stasjon %s" #: ../../install_steps_interactive.pm_.c:861 #, fuzzy msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Du har nå muligheten til å laste ned pakker som har blitt sluppet\n" "etter at distribusjonen ble sluppet.\n" "\n" "Du kan få sikkerhetsoppdateringer og bugfikser, men du trenger en\n" "internettoppkobling for å fortsette.\n" "\n" "Ønsker du å installere oppdateringene?" #: ../../install_steps_interactive.pm_.c:876 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Kontakter Mandrake Linux web-sted for å få en liste over tilgjengelige speil" #: ../../install_steps_interactive.pm_.c:881 msgid "Choose a mirror from which to get the packages" msgstr "Velg et speil som pakkene kan hentes fra" #: ../../install_steps_interactive.pm_.c:890 msgid "Contacting the mirror to get the list of available packages..." msgstr "Kontakter speilet for å få en liste over tilgjengelige pakker" #: ../../install_steps_interactive.pm_.c:918 msgid "Which is your timezone?" msgstr "Hva er din tidsone?" #: ../../install_steps_interactive.pm_.c:923 msgid "Hardware clock set to GMT" msgstr "Maskinvareklokken din satt til GMT" #: ../../install_steps_interactive.pm_.c:924 msgid "Automatic time synchronization (using NTP)" msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)" #: ../../install_steps_interactive.pm_.c:931 msgid "NTP Server" msgstr "NTP-tjener" #: ../../install_steps_interactive.pm_.c:965 #: ../../install_steps_interactive.pm_.c:972 msgid "Remote CUPS server" msgstr "Fjern-CUPS tjener" #: ../../install_steps_interactive.pm_.c:966 msgid "No printer" msgstr "Ingen skriver" #: ../../install_steps_interactive.pm_.c:982 msgid "Do you have an ISA sound card?" msgstr "Har du et ISA lydkort?" #: ../../install_steps_interactive.pm_.c:984 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "Kjør \"sndconfig\" etter installasjonen for å konfigurere lydkortet ditt" #: ../../install_steps_interactive.pm_.c:986 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "Lydkort ikke oppdaget. Prøv \"harddrake\" etter installasjonen" #: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27 msgid "Summary" msgstr "Oppsummering" #: ../../install_steps_interactive.pm_.c:994 msgid "Mouse" msgstr "Mus" #: ../../install_steps_interactive.pm_.c:996 msgid "Timezone" msgstr "Tidssone" #: ../../install_steps_interactive.pm_.c:997 #: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844 msgid "Printer" msgstr "Skriver" #: ../../install_steps_interactive.pm_.c:999 msgid "ISDN card" msgstr "ISDN-kort" #: ../../install_steps_interactive.pm_.c:1003 #: ../../install_steps_interactive.pm_.c:1009 msgid "Sound card" msgstr "Lydkort" #: ../../install_steps_interactive.pm_.c:1012 msgid "TV card" msgstr "TV-kort" #: ../../install_steps_interactive.pm_.c:1055 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1084 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1056 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1093 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1057 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1107 #, fuzzy msgid "Windows Domain" msgstr "NIS-domene" #: ../../install_steps_interactive.pm_.c:1058 #: ../../install_steps_interactive.pm_.c:1080 msgid "Local files" msgstr "Lokale filer" #: ../../install_steps_interactive.pm_.c:1067 #: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24 msgid "Set root password" msgstr "Sett root-passord" #: ../../install_steps_interactive.pm_.c:1069 msgid "No password" msgstr "Intet passord" #: ../../install_steps_interactive.pm_.c:1074 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Dette passordet er for enkelt (må være minst %d tegn langt)" #: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72 #: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144 msgid "Authentication" msgstr "Autentifikasjon" #: ../../install_steps_interactive.pm_.c:1088 msgid "Authentication LDAP" msgstr "Autentisering LDAP" #: ../../install_steps_interactive.pm_.c:1089 msgid "LDAP Base dn" msgstr "LDAP grunnleggende dn" #: ../../install_steps_interactive.pm_.c:1090 msgid "LDAP Server" msgstr "LDAP-tjener" #: ../../install_steps_interactive.pm_.c:1096 msgid "Authentication NIS" msgstr "Autentisering NIS" #: ../../install_steps_interactive.pm_.c:1097 msgid "NIS Domain" msgstr "NIS-domene" #: ../../install_steps_interactive.pm_.c:1098 msgid "NIS Server" msgstr "NIS-tjener" #: ../../install_steps_interactive.pm_.c:1104 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm_.c:1106 #, fuzzy msgid "Authentication Windows Domain" msgstr "Autentisering LDAP" #: ../../install_steps_interactive.pm_.c:1108 #, fuzzy msgid "Domain Admin User Name" msgstr "Domenenavn" #: ../../install_steps_interactive.pm_.c:1109 msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm_.c:1144 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n" "å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du " "ikke ønsker\n" "å installere SILO på systemet ditt, eller et annet operativsystem fjerner " "SILO,\n" "eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert " "oppstartsdiskett\n" "kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye " "lettere gjenopprette\n" "etter systemsvikt.\n" "Hvis du ønsker du å opprette en oppstartsdiskett for systemet ditt, sett inn " "en diskett\n" "i den første stasjonen og trykk \"Ok\"." #: ../../install_steps_interactive.pm_.c:1160 msgid "First floppy drive" msgstr "Første diskettstasjon" #: ../../install_steps_interactive.pm_.c:1161 msgid "Second floppy drive" msgstr "Andre diskettstasjon" #: ../../install_steps_interactive.pm_.c:1162 #: ../../printer/printerdrake.pm_.c:2397 msgid "Skip" msgstr "Dropp" #: ../../install_steps_interactive.pm_.c:1167 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n" "å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du " "ikke ønsker\n" "å installere LILO (eller grub) på systemet ditt, eller et annet " "operativsystem fjerner LILO,\n" "eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert " "oppstartsdiskett\n" "kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye " "lettere gjenopprette\n" "etter systemsvikt. Ønsker du å opprette en oppstartsdiskett for systemet " "ditt?\n" "%s" #: ../../install_steps_interactive.pm_.c:1173 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(ADVARSEL! Du bruker XFS på din rotpartisjon,\n" "det å lage en oppstartsdiskett på en 1,44 Mb diskett vil\n" "antageligvis ikke gå, dan XFS trenger en veldig stor driver)." #: ../../install_steps_interactive.pm_.c:1181 msgid "Sorry, no floppy drive available" msgstr "Beklager, ingen diskettstasjon tilgjengelig" #: ../../install_steps_interactive.pm_.c:1185 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Velg diskettstasjonen du ønsker å bruke for å lage oppstartsdisketten" #: ../../install_steps_interactive.pm_.c:1189 #, c-format msgid "Insert a floppy in %s" msgstr "Sett inn en diskett i %s" #: ../../install_steps_interactive.pm_.c:1192 msgid "Creating bootdisk..." msgstr "Oppretter oppstartdiskett" #: ../../install_steps_interactive.pm_.c:1199 msgid "Preparing bootloader..." msgstr "Klargjør oppstartslaster" #: ../../install_steps_interactive.pm_.c:1210 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" "Det virker som du har en OldWorld eller ukjent\n" "maskin, yaboot oppstartslasteren vil ikke virke for deg.\n" "Installasjonen vil fortsette, men du må\n" "bruke BootX for å starte din maskin." #: ../../install_steps_interactive.pm_.c:1216 msgid "Do you want to use aboot?" msgstr "Ønsker du å bruke aboot?" #: ../../install_steps_interactive.pm_.c:1219 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Feil ved installasjon av aboot, \n" "prøve å installere selv om det ødelegger den første partisjonen?" #: ../../install_steps_interactive.pm_.c:1226 msgid "Installing bootloader" msgstr "Installer oppstartslaster" #: ../../install_steps_interactive.pm_.c:1232 msgid "Installation of bootloader failed. The following error occured:" msgstr "Installasjon av oppstartslaster mislykket. Følgende feil oppsto:" #: ../../install_steps_interactive.pm_.c:1240 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Du må muligens endre din Open Firmware oppstartsenhet for å\n" " slå på oppstartslasteren. Hvis du ikke ser oppstartslasteren ved\n" " omstart, hold nede Command-Option-O-F ved omstart og skriv:\n" " setenv boot-device %s,\\\\:tbxi\n" " Skriv så: shut-down\n" "Ved din neste oppstart burde du se oppstartslasteren." #: ../../install_steps_interactive.pm_.c:1274 #: ../../standalone/drakautoinst_.c:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Sett inn en tom diskett i stasjon %s" #: ../../install_steps_interactive.pm_.c:1278 msgid "Creating auto install floppy..." msgstr "Oppretter diskett for autoinstallasjon" #: ../../install_steps_interactive.pm_.c:1289 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Noen trinn er ikke fullført.\n" "\n" "Ønsker du virkelig å avslutte nå?" #: ../../install_steps_interactive.pm_.c:1300 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Gratulerer, installasjonen er fullført.\n" "Fjern oppstartsmediet og trykk return for å starte på nytt.\n" "\n" "\n" "For informasjon om endringer som er tilgjengelige for denne utgaven av " "Mandrake Linux,\n" "sjekk errataen tilgjengelig fra:\n" "\n" "\n" "%s\n" "\n" "\n" "Informasjon om konfigurering av systemet ditt finnes i post\n" "install-kapittelet i Official Mandrake Linux User's Guide." #: ../../install_steps_interactive.pm_.c:1313 #, fuzzy msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakesoft.com/sales/contact" #: ../../install_steps_interactive.pm_.c:1318 msgid "Generate auto install floppy" msgstr "Oppretter diskett for autoinstallasjon" #: ../../install_steps_interactive.pm_.c:1320 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Autoinstallasjonen kan være fullstendig automatisk\n" "hvis du ønsker det. Den vil da ta over harddisken!!\n" "(dette er for å installere på en annen maskin)\n" "\n" "Du kanskje ønske å kjøre installasjonen omigjen.\n" #: ../../install_steps_interactive.pm_.c:1325 msgid "Automated" msgstr "Automatisert" #: ../../install_steps_interactive.pm_.c:1325 msgid "Replay" msgstr "Gjør igjen" #: ../../install_steps_interactive.pm_.c:1328 msgid "Save packages selection" msgstr "Lagre pakkevalg" #: ../../install_steps_newt.pm_.c:20 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux installasjon %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" " / mellom elementer | velger | neste skjerm " #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "kdesu mangler" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "Konsollhjelper mangler" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "Velg en fil" #: ../../interactive.pm_.c:318 msgid "Advanced" msgstr "Avansert" #: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117 msgid "Basic" msgstr "Grunnleggende" #: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158 #: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434 msgid "<- Previous" msgstr "<- Forrige" #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087 #: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143 msgid "Next" msgstr "Neste" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "Dårlig valg, prøv igjen\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "Ditt valg? (standard %s) " #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Innganger du må fylle:\n" "%s" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ditt valg? (0/1, standard `%s') " #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" msgstr "Valg: `%s': %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" msgstr "Ønsker du å klikke på denne knappen? " #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ditt valg? (standard `%s'%s) " #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Det er mange ting å velge fra (%s).\n" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Vennlig velg det første nummeret av 10-range du ønsker å redigere,\n" "eller bare trykk Enter for å fortsette.\n" "Ditt valg? " #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Merk, et merke endret:\n" "%s" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "Re-submit" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188 msgid "Czech (QWERTZ)" msgstr "Tsjekkisk (QWERTZ)" #: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190 msgid "German" msgstr "Tysk" #: ../../keyboard.pm_.c:155 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Spanish" msgstr "Spansk" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "Finnish" msgstr "Finsk" #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200 msgid "French" msgstr "Fransk" #: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233 msgid "Norwegian" msgstr "Norsk" #: ../../keyboard.pm_.c:160 msgid "Polish" msgstr "Polsk" #: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241 msgid "Russian" msgstr "Russisk" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243 msgid "Swedish" msgstr "Svensk" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259 msgid "UK keyboard" msgstr "UK-tastatur" #: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260 msgid "US keyboard" msgstr "US-tastatur" #: ../../keyboard.pm_.c:167 msgid "Albanian" msgstr "Albansk" #: ../../keyboard.pm_.c:168 msgid "Armenian (old)" msgstr "Armensk (gammel)" #: ../../keyboard.pm_.c:169 msgid "Armenian (typewriter)" msgstr "Armensk (skrivemaskin)" #: ../../keyboard.pm_.c:170 msgid "Armenian (phonetic)" msgstr "Armensk (phonétic)" #: ../../keyboard.pm_.c:175 msgid "Azerbaidjani (latin)" msgstr "Azerbaidjansk (latin)" #: ../../keyboard.pm_.c:177 msgid "Belgian" msgstr "Belgisk" #: ../../keyboard.pm_.c:178 #, fuzzy msgid "Bengali" msgstr "slå på" #: ../../keyboard.pm_.c:179 msgid "Bulgarian (phonetic)" msgstr "Bulgarsk (phonetic)" #: ../../keyboard.pm_.c:180 msgid "Bulgarian (BDS)" msgstr "Bulgarsk (BDS)" #: ../../keyboard.pm_.c:181 msgid "Brazilian (ABNT-2)" msgstr "Brasiliansk (ABNT-2)" #: ../../keyboard.pm_.c:184 #, fuzzy msgid "Bosnian" msgstr "Estlandsk" #: ../../keyboard.pm_.c:185 msgid "Belarusian" msgstr "Belarusian" #: ../../keyboard.pm_.c:186 msgid "Swiss (German layout)" msgstr "Sveisisk (tysk oppsett)" #: ../../keyboard.pm_.c:187 msgid "Swiss (French layout)" msgstr "Sveisisk (fransk oppsett)" #: ../../keyboard.pm_.c:189 msgid "Czech (QWERTY)" msgstr "Tsjekkisk (QWERTY)" #: ../../keyboard.pm_.c:191 msgid "German (no dead keys)" msgstr "Tysk (ingen døde taster)" #: ../../keyboard.pm_.c:192 msgid "Devanagari" msgstr "" #: ../../keyboard.pm_.c:193 msgid "Danish" msgstr "Dansk" #: ../../keyboard.pm_.c:194 msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../keyboard.pm_.c:195 msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norsk)" #: ../../keyboard.pm_.c:196 msgid "Dvorak (Swedish)" msgstr "Dvorak (Svensk)" #: ../../keyboard.pm_.c:197 msgid "Estonian" msgstr "Estlandsk" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Russian\" layout)" msgstr "Georgisk (\"Russisk\" oppsett)" #: ../../keyboard.pm_.c:202 msgid "Georgian (\"Latin\" layout)" msgstr "Georgisk (\"Latinsk\" oppsett)" #: ../../keyboard.pm_.c:203 msgid "Greek" msgstr "Gresk" #: ../../keyboard.pm_.c:204 msgid "Gujarati" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm_.c:206 msgid "Hungarian" msgstr "Ungarsk" #: ../../keyboard.pm_.c:207 msgid "Croatian" msgstr "Kroatisk" #: ../../keyboard.pm_.c:208 msgid "Israeli" msgstr "Israelsk" #: ../../keyboard.pm_.c:209 msgid "Israeli (Phonetic)" msgstr "Israelsk (Phonetic)" #: ../../keyboard.pm_.c:210 msgid "Iranian" msgstr "Iransk" #: ../../keyboard.pm_.c:211 msgid "Icelandic" msgstr "Islansk" #: ../../keyboard.pm_.c:212 msgid "Italian" msgstr "Italiensk" #: ../../keyboard.pm_.c:213 msgid "Inuktitut" msgstr "" #: ../../keyboard.pm_.c:214 msgid "Japanese 106 keys" msgstr "Japansk 106 taster" #: ../../keyboard.pm_.c:217 msgid "Korean keyboard" msgstr "Koreansk tastatur" #: ../../keyboard.pm_.c:218 msgid "Latin American" msgstr "Latinamerikansk" #: ../../keyboard.pm_.c:219 #, fuzzy msgid "Laotian" msgstr "Lotvisk" #: ../../keyboard.pm_.c:220 msgid "Lithuanian AZERTY (old)" msgstr "Liauisk AZERTY (gammel)" #: ../../keyboard.pm_.c:222 msgid "Lithuanian AZERTY (new)" msgstr "Liauisk AZERTY (ny)" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"number row\" QWERTY" msgstr "Litauisk \"nummer-rekke\" QWERTY" #: ../../keyboard.pm_.c:224 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Litauisk \"phonétic\" QWERTY" #: ../../keyboard.pm_.c:225 msgid "Latvian" msgstr "Lotvisk" #: ../../keyboard.pm_.c:226 msgid "Malayalam" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Macedonian" msgstr "Makedonsk" #: ../../keyboard.pm_.c:228 msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm_.c:229 #, fuzzy msgid "Mongolian (cyrillic)" msgstr "Serbisk (cyrillic)" #: ../../keyboard.pm_.c:230 msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm_.c:231 msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm_.c:232 msgid "Dutch" msgstr "Hollansk" #: ../../keyboard.pm_.c:234 msgid "Polish (qwerty layout)" msgstr "Polsk (qwerty oppsett)" #: ../../keyboard.pm_.c:235 msgid "Polish (qwertz layout)" msgstr "Polsk (qwertz oppsett)" #: ../../keyboard.pm_.c:236 msgid "Portuguese" msgstr "Portugisisk" #: ../../keyboard.pm_.c:237 msgid "Canadian (Quebec)" msgstr "Canadisk (Quebec)" #: ../../keyboard.pm_.c:239 msgid "Romanian (qwertz)" msgstr "Romansk (qwertz)" #: ../../keyboard.pm_.c:240 msgid "Romanian (qwerty)" msgstr "Romansk (qwerty)" #: ../../keyboard.pm_.c:242 msgid "Russian (Yawerty)" msgstr "Russisk (Yawerty)" #: ../../keyboard.pm_.c:244 msgid "Slovenian" msgstr "Slovensk" #: ../../keyboard.pm_.c:245 msgid "Slovakian (QWERTZ)" msgstr "Slovakisk (QWERTZ)" #: ../../keyboard.pm_.c:246 msgid "Slovakian (QWERTY)" msgstr "Slovakisk (QWERTY)" #: ../../keyboard.pm_.c:248 msgid "Serbian (cyrillic)" msgstr "Serbisk (cyrillic)" #: ../../keyboard.pm_.c:250 msgid "Tamil (Unicode)" msgstr "Tamilsk (Unicode)" #: ../../keyboard.pm_.c:251 msgid "Tamil (TSCII)" msgstr "Tamilsk (TSCII)" #: ../../keyboard.pm_.c:252 msgid "Thai keyboard" msgstr "Thai-tastatur" #: ../../keyboard.pm_.c:254 msgid "Tajik keyboard" msgstr "Tajik-tastatur" #: ../../keyboard.pm_.c:255 msgid "Turkish (traditional \"F\" model)" msgstr "Tyrkisk (tradisjonell \"F\" modell)" #: ../../keyboard.pm_.c:256 msgid "Turkish (modern \"Q\" model)" msgstr "Tyrkisk (moderne \"Q\" modell)" #: ../../keyboard.pm_.c:258 msgid "Ukrainian" msgstr "Ukrainsk" #: ../../keyboard.pm_.c:261 msgid "US keyboard (international)" msgstr "US-tastatur (internasjonal)" #: ../../keyboard.pm_.c:262 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamesisk \"nummer-rekke\" QWERTY" #: ../../keyboard.pm_.c:263 msgid "Yugoslavian (latin)" msgstr "Jugoslavisk (latin)" #: ../../keyboard.pm_.c:270 msgid "Right Alt key" msgstr "Høyre Alt tast" #: ../../keyboard.pm_.c:271 msgid "Both Shift keys simultaneously" msgstr "Begge Shift taster samtidig" #: ../../keyboard.pm_.c:272 msgid "Control and Shift keys simultaneously" msgstr "Control og Shift taster samtidig" #: ../../keyboard.pm_.c:273 msgid "CapsLock key" msgstr "CapsLock tast" #: ../../keyboard.pm_.c:274 msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl og Alt taster samtidig" #: ../../keyboard.pm_.c:275 msgid "Alt and Shift keys simultaneously" msgstr "Alt og Shift taster samtidig" #: ../../keyboard.pm_.c:276 msgid "\"Menu\" key" msgstr "\" Menu\" tast" #: ../../keyboard.pm_.c:277 msgid "Left \"Windows\" key" msgstr "Venstre \"Windows\" tast" #: ../../keyboard.pm_.c:278 msgid "Right \"Windows\" key" msgstr "Høyre \"Windows\" tast" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "Rund monterer %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "Fjern de logiske partisjoner først\n" #: ../../modules.pm_.c:290 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" "PCMCIA støtte eksisterer ikke lengre for 2.2 kjerner. Vennligst bruk en 2.4 " "kernel." #: ../../modules/interactive.pm_.c:16 msgid "You can configure each parameter of the module here." msgstr "Du kan konfigurere hvert parameter av modulen her." #: ../../modules/parameters.pm_.c:18 #, fuzzy msgid "modinfo is not available" msgstr "Ingen diskettstasjon tilgjengelig" #: ../../modules/parameters.pm_.c:50 #, fuzzy msgid "a number" msgstr "Telefonnummer" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modules/parameters.pm_.c:54 msgid "comma separated numbers" msgstr "" #: ../../modules/parameters.pm_.c:54 #, fuzzy msgid "comma separated strings" msgstr "Formater partisjoner" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - mus" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "Generisk PS2 hjulmus" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 #, fuzzy msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 knapp" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "Generisk 2-knappers mus" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "Hjul" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "seriell" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "Generisk 3-knappers mus" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "Logitech CC-seriene (seriell)" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM-seriene" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (seriell, gammel C7 type)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "bussmus" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 knapper" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 knapper" #: ../../mouse.pm_.c:75 msgid "none" msgstr "ingen" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "Ingen mus" #: ../../mouse.pm_.c:490 msgid "Please test the mouse" msgstr "Vennligst test musen." #: ../../mouse.pm_.c:491 msgid "To activate the mouse," msgstr "For å aktivere musen," #: ../../mouse.pm_.c:492 msgid "MOVE YOUR WHEEL!" msgstr "BEVEG HJULET DITT!" #: ../../my_gtk.pm_.c:65 #, fuzzy msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435 msgid "Finish" msgstr "Avslutt" #: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057 #: ../../ugtk2.pm_.c:435 msgid "Next ->" msgstr "Neste ->" #: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926 msgid "Is this correct?" msgstr "Er dette riktig?" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011 msgid "Info" msgstr "Info" #: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036 msgid "Expand Tree" msgstr "Utvid tre" #: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037 msgid "Collapse Tree" msgstr "Trekk sammen tre" #: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038 msgid "Toggle between flat and group sorted" msgstr "Skift mellom flat og gruppesortert" #: ../../network/adsl.pm_.c:23 msgid "use pppoe" msgstr "bruk pppoe" #: ../../network/adsl.pm_.c:24 msgid "use pptp" msgstr "bruk pptp" #: ../../network/adsl.pm_.c:25 msgid "use dhcp" msgstr "bruk dhcp" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../network/adsl.pm_.c:27 msgid "Sagem (using pppoe) usb" msgstr "" #: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "Koble opp mot Internett" #: ../../network/adsl.pm_.c:30 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Den mest vanlige måten å koble opp med adsl er pppoe.\n" "Noen oppkoblinger bruker pptp, noen få bruker dhcp.\n" "Hvis du ikke vet, velg 'bruk pppoe'" #: ../../network/adsl.pm_.c:166 msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/drakfirewall.pm_.c:12 #, fuzzy msgid "Web Server" msgstr "Tjener" #: ../../network/drakfirewall.pm_.c:17 #, fuzzy msgid "Domain Name Server" msgstr "Domenenavn" #: ../../network/drakfirewall.pm_.c:32 #, fuzzy msgid "Mail Server" msgstr "Databasetjener" #: ../../network/drakfirewall.pm_.c:37 #, fuzzy msgid "POP and IMAP Server" msgstr "LDAP-tjener" #: ../../network/drakfirewall.pm_.c:111 #, fuzzy msgid "No network card" msgstr "ingen nettverkskort funnet" #: ../../network/drakfirewall.pm_.c:129 #, fuzzy msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "tinyfirewall konfigurering\n" "\n" "Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n" "For en kraftig dedikert brannmurløsning ta en kikk på den\n" "spesialiserte MandrakeSecurity Firewall distribusjonen." #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm_.c:169 #, fuzzy msgid "Other ports" msgstr "Test porter" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client" msgstr "" "Hvilken dhcp klient ønsker du å bruke?\n" "Standard er dhcp-client" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n" "Jeg kan ikke sette opp denne tilkoblingstypen." #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234 msgid "Choose the network interface" msgstr "Velg nettverksgrensesnitt" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "Vennligst velg hvilket nettverksadapter du ønsker å bruke til å koble opp\n" "mot Internett" #: ../../network/ethernet.pm_.c:176 msgid "no network card found" msgstr "ingen nettverkskort funnet" #: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349 msgid "Configuring network" msgstr "Konfigurerer nettverk" #: ../../network/ethernet.pm_.c:201 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Vennligst entre vertsnavnet ditt hvis du vet det.\n" "Noen DHCP tjenere trenger vertsnavnet for å virke.\n" "Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n" "som ``minboks.mittlab.mittfirma.no''." #: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354 msgid "Host name" msgstr "Vertsnavn" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103 #: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171 #: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245 #: ../../network/netconnect.pm_.c:253 msgid "Network Configuration Wizard" msgstr "Nettverkskonfigurasjonveiviser" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "Eksternt ISDN modem" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "Internt ISDN-kort" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "Hva slags type er ISDN-tilknytningen din?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "Hvilken ISDN konfigurering foretrekker du?\n" "\n" "* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n" " verktøy, den det er vanskelig å konfigurere for en nybegynner,\n" " og er ikke standardbasert.\n" "\n" "' Det nye konfigurasjonsverktøyet er enklere å forstå,\n" " mer standardisert, men med færre verktøy.\n" "\n" "Vi anbefaler den nye konfigurasjonen.\n" "\n" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "Ny konfigurasjon (isdn-light)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "Gamle konfigurasjonen (isdn4net)" #: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184 #: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202 #: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219 msgid "ISDN Configuration" msgstr "ISDN-konfigurasjon" #: ../../network/isdn.pm_.c:166 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Velg din tilbyder.\n" " Hvis denne ikke er i listen, velg ikke i listen" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol" msgstr "Europaprotokollen" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol (EDSS1)" msgstr "Europaprotokollen (EDSS1)" #: ../../network/isdn.pm_.c:181 msgid "Protocol for the rest of the world" msgstr "Protokoll for resten av verden" #: ../../network/isdn.pm_.c:181 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Resten av verden \n" " ingen D-kanal (leid linje)" #: ../../network/isdn.pm_.c:185 msgid "Which protocol do you want to use?" msgstr "Hvilken protokoll ønsker du å bruke?" #: ../../network/isdn.pm_.c:196 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm_.c:203 msgid "What kind of card do you have?" msgstr "Hva slags kort har du?" #: ../../network/isdn.pm_.c:204 msgid "I don't know" msgstr "Jeg vet ikke" #: ../../network/isdn.pm_.c:204 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:204 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:210 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Hvis du har et ISA kort burde verdiene i neste bilde være riktige.\n" "\n" "Hvis du har et PCMCIA kort må du vite irq og io for kortet.\n" #: ../../network/isdn.pm_.c:214 msgid "Abort" msgstr "Avbryt" #: ../../network/isdn.pm_.c:214 msgid "Continue" msgstr "Fortsett" #: ../../network/isdn.pm_.c:220 msgid "Which is your ISDN card?" msgstr "Hvilket er ditt ISDN-kort?" #: ../../network/isdn.pm_.c:239 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst " "velg et PCI-kort i neste skjermbilde." #: ../../network/isdn.pm_.c:248 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde." #: ../../network/modem.pm_.c:57 msgid "Please choose which serial port your modem is connected to." msgstr "Vennligst velg hvilken serieport modemet ditt koblet til." #: ../../network/modem.pm_.c:67 msgid "Dialup options" msgstr "Opsjoner oppringt" #: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619 msgid "Connection name" msgstr "Navn tilknytning" #: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620 msgid "Phone number" msgstr "Telefonnummer" #: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621 msgid "Login ID" msgstr "Login ID" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Script-based" msgstr "Scriptbasert" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Terminal-based" msgstr "Terminalbasert" #: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624 msgid "Domain name" msgstr "Domenenavn" #: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625 msgid "First DNS Server (optional)" msgstr "Første DNS-tjener (valgfri)" #: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626 msgid "Second DNS Server (optional)" msgstr "Andre DNS-tjener (valgfri)" #: ../../network/modem.pm_.c:95 msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm_.c:97 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Do nothing" msgstr "men ikke lik" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Install rpm" msgstr "Installer" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Title" msgstr "Tabell" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Du kan koble ned eller rekonfigurere tilkoblingen din." #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "Du kan rekonfigurere tilkoblingen din." #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "Du er for øyeblikket koblet opp mot Internett" #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din." #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "Du er for øyeblikket ikke koblet opp mot Internett." #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "Koble til" #: ../../network/netconnect.pm_.c:37 msgid "Disconnect" msgstr "Koble fra" #: ../../network/netconnect.pm_.c:38 msgid "Configure the connection" msgstr "Konfigurer tilkoblingen" #: ../../network/netconnect.pm_.c:41 msgid "Internet connection & configuration" msgstr "Internett tilkobling & konfigurasjon" #: ../../network/netconnect.pm_.c:94 #, c-format msgid "We are now going to configure the %s connection." msgstr "Vi skal nå konfigurere din %s tilkobling." #: ../../network/netconnect.pm_.c:103 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "Vi skal nå konfigurere %s oppkoblingen.\n" "\n" "\n" "Trykk OK for å begynne." #: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272 #: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77 msgid "Network Configuration" msgstr "Nettverkskonfigurasjon" #: ../../network/netconnect.pm_.c:133 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Fordi du holder på med en nettverksinstallasjon er ditt " "nettverksoppsettallerede konfigurert.\n" "Trykk OK for å beholde din eksisterende konfigurasjon, eller avbryt for å " "rekonfigurere din internett og nettverkskonfigurasjon.\n" #: ../../network/netconnect.pm_.c:157 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Velkommen til nettverkskonfigurasjon hjelperen\n" "\n" "Vi skal nå konfigurere din internett/nettverksoppkobling.\n" "Hvis du ikke ønsker å bruke automatisk oppdagelse, fjern krysset\n" "i boksen.\n" #: ../../network/netconnect.pm_.c:163 msgid "Choose the profile to configure" msgstr "Velg profilen som skal konfigureres" #: ../../network/netconnect.pm_.c:164 msgid "Use auto detection" msgstr "Bruk automatisk detektering" #: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966 #: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274 #: ../../standalone/drakfloppy_.c:118 msgid "Expert Mode" msgstr "Ekspertmodus" #: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364 msgid "Detecting devices..." msgstr "Finner enheter..." #: ../../network/netconnect.pm_.c:214 msgid "Normal modem connection" msgstr "Normal modemtilkobling" #: ../../network/netconnect.pm_.c:214 #, c-format msgid "detected on port %s" msgstr "oppdaget på port %s" #: ../../network/netconnect.pm_.c:215 #, fuzzy msgid "Winmodem connection" msgstr "Normal modemtilkobling" #: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217 #, fuzzy msgid "detected" msgstr "oppdaget %s" #: ../../network/netconnect.pm_.c:216 msgid "ISDN connection" msgstr "ISDN-tilkobling" #: ../../network/netconnect.pm_.c:216 #, c-format msgid "detected %s" msgstr "oppdaget %s" #: ../../network/netconnect.pm_.c:217 msgid "ADSL connection" msgstr "ADSL oppkobling" #: ../../network/netconnect.pm_.c:218 msgid "Cable connection" msgstr "Kabeltilkobling" #: ../../network/netconnect.pm_.c:218 msgid "cable connection detected" msgstr "Kabeltilkobling detektert" #: ../../network/netconnect.pm_.c:219 msgid "LAN connection" msgstr "Lokalt nettverksoppkobling" #: ../../network/netconnect.pm_.c:219 msgid "ethernet card(s) detected" msgstr "oppdaget ethernettkort" #: ../../network/netconnect.pm_.c:222 msgid "Choose the connection you want to configure" msgstr "Velg oppkoblingen du ønsker å konfigurere" #: ../../network/netconnect.pm_.c:246 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Du har konfigureret flere måter å koble deg mot internett på.\n" "Venligst velg den du ønsker å bruker.\n" "\n" #: ../../network/netconnect.pm_.c:247 msgid "Internet connection" msgstr "Internett tilkobling" #: ../../network/netconnect.pm_.c:253 msgid "Do you want to start the connection at boot?" msgstr "Ønsker du å starte tilkoblingen din ved oppstart?" #: ../../network/netconnect.pm_.c:267 msgid "Network configuration" msgstr "Nettverkskonfigurasjon" #: ../../network/netconnect.pm_.c:268 msgid "The network needs to be restarted" msgstr "Nettverket må startes på nytt" #: ../../network/netconnect.pm_.c:272 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Et problem oppsto ved omstart av nettverket: \n" "\n" "%s" #: ../../network/netconnect.pm_.c:282 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "Gratulerer, internett og nettverkskonfigurasjonen er fullført.\n" "\n" "Konfigurasjonen vil nå bli aktivert.\n" #: ../../network/netconnect.pm_.c:286 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Etter at det er ferding, anbefaler vi at du restarter X\n" "slik at du unngår problemer med at vertsnavnet forandres." #: ../../network/netconnect.pm_.c:287 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Det oppsto problemer under konfigurasjon.\n" "Test tilkoblingen din via net_monitor eller mcc. Hvis tilkoblingen din ikke " "virker, ønsker du kanskje å kjøre konfigureringen på nytt" #: ../../network/network.pm_.c:278 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "ADVARSEL: Denne enheten har tidligere blitt konfigurert til å koble opp mot " "Internett.\n" "Trykk OK for å beholde enhetens konfigurasjon.\n" "Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen." #: ../../network/network.pm_.c:283 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Vennligst entre IP-konfigurasjonen for denne maskinen.\n" "Hvert element bør entres som en IP-adresse i punkt-desimal\n" "notasjon (f.eks, 1.2.3.4)." #: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294 #, c-format msgid "Configuring network device %s" msgstr "Konfigurerer nettverksenhet %s" #: ../../network/network.pm_.c:294 #, c-format msgid " (driver %s)" msgstr " (driver %s)" #: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228 #: ../../standalone/drakconnect_.c:464 msgid "IP address" msgstr "IP-adresse" #: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465 #: ../../standalone/drakgw_.c:291 msgid "Netmask" msgstr "Nettmaske" #: ../../network/network.pm_.c:298 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network/network.pm_.c:298 msgid "Automatic IP" msgstr "Automatisk IP" #: ../../network/network.pm_.c:299 #, fuzzy msgid "Start at boot" msgstr "Startet ved oppstart" #: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812 msgid "IP address should be in format 1.2.3.4" msgstr "IP-adresse bør være i format 1.2.3.4" #: ../../network/network.pm_.c:326 msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0'." msgstr "" #: ../../network/network.pm_.c:330 msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0'." msgstr "" #: ../../network/network.pm_.c:350 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Vennligst entre vertsnavnet ditt.\n" "Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n" "så som ``minboks.mittlab.mittfirma.no''.\n" "Du kan også entre IP-adressen til gateway'en hvis du har en" #: ../../network/network.pm_.c:355 msgid "DNS server" msgstr "DNS-tjener" #: ../../network/network.pm_.c:356 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (f.eks. %s)" #: ../../network/network.pm_.c:358 msgid "Gateway device" msgstr "Gateway-enhet" #: ../../network/network.pm_.c:363 #, fuzzy msgid "DNS server address should be in format 1.2.3.4" msgstr "IP-adresse bør være i format 1.2.3.4" #: ../../network/network.pm_.c:367 #, fuzzy msgid "Gateway address should be in format 1.2.3.4" msgstr "IP-adresse bør være i format 1.2.3.4" #: ../../network/network.pm_.c:381 msgid "Proxies configuration" msgstr "Konfigurasjon proxy" #: ../../network/network.pm_.c:382 msgid "HTTP proxy" msgstr "HTTP-proxy" #: ../../network/network.pm_.c:383 msgid "FTP proxy" msgstr "FTP-proxy" #: ../../network/network.pm_.c:384 msgid "Track network card id (useful for laptops)" msgstr "Spor id nettverkskort (nyttig for bærbare)" #: ../../network/network.pm_.c:387 msgid "Proxy should be http://..." msgstr "Proxy burde være http://..." #: ../../network/network.pm_.c:388 #, fuzzy msgid "Url should begin with 'ftp:' or 'http:'" msgstr "URLen bør begynne med \"http:\"" #: ../../network/shorewall.pm_.c:26 msgid "Firewalling configuration detected!" msgstr "Brannmurkonfigurasjon oppdaget!" #: ../../network/shorewall.pm_.c:27 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du " "trenger muligens å konfigurere noe manuelt etter installasjon." #: ../../network/tools.pm_.c:57 msgid "Internet configuration" msgstr "Internett-konfigurasjon" #: ../../network/tools.pm_.c:58 msgid "Do you want to try to connect to the Internet now?" msgstr "Vil du prøve å koble opp mot Internett nå?" #: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193 msgid "Testing your connection..." msgstr "Tester tilkoblingen din..." #: ../../network/tools.pm_.c:70 msgid "The system is now connected to Internet." msgstr "Systemet er nå koblet opp mot Internett." #: ../../network/tools.pm_.c:71 msgid "For security reason, it will be disconnected now." msgstr "Av sikkerhetsgrunner vil den bli frakoblet nå." #: ../../network/tools.pm_.c:72 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "Det ser ikke ut til at systemet er koblet til Internett.\n" "Prøv å rekonfigurere tilkoblingen din." #: ../../network/tools.pm_.c:96 msgid "Connection Configuration" msgstr "Konfigurasjon tilknytning." #: ../../network/tools.pm_.c:97 msgid "Please fill or check the field below" msgstr "Vennnligst fyll eller merk feltet under" #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605 msgid "Card IRQ" msgstr "Kort IRQ" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606 msgid "Card mem (DMA)" msgstr "Kort mem (DMA)" #: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607 msgid "Card IO" msgstr "Kort IO" #: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608 msgid "Card IO_0" msgstr "Kort IO_0" #: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609 msgid "Card IO_1" msgstr "Kort IO_1" #: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610 msgid "Your personal phone number" msgstr "Ditt telefonnummer" #: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611 msgid "Provider name (ex provider.net)" msgstr "Navn tilbyder (f.eks. tilbyder.net)" #: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612 msgid "Provider phone number" msgstr "Telefonnummer tilbyder" #: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613 msgid "Provider dns 1 (optional)" msgstr "Tilbyder dns 1 (valgfri)" #: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614 msgid "Provider dns 2 (optional)" msgstr "Tilbyder dns 2 (valgfri)" #: ../../network/tools.pm_.c:109 msgid "Choose your country" msgstr "Velg land" #: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617 msgid "Dialing mode" msgstr "Oppringningsmodus" #: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629 msgid "Connection speed" msgstr "Oppkoblingshastighet" #: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630 msgid "Connection timeout (in sec)" msgstr "Oppkoblingens timout (i sekunder)" #: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615 msgid "Account Login (user name)" msgstr "Logg inn (brukernavn)" #: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616 #: ../../standalone/drakconnect_.c:647 msgid "Account Password" msgstr "Passord" #: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132 msgid "United Kingdom" msgstr "" #: ../../partition_table.pm_.c:603 msgid "mount failed: " msgstr "montering mislykket: " #: ../../partition_table.pm_.c:667 msgid "Extended partition not supported on this platform" msgstr "Utvidet partisjon ikke støttet på denne plattformen" #: ../../partition_table.pm_.c:685 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n" "Den eneste løsningen er å flytte primærpartisjonene dine for å ha hullet ved " "siden av de utvidede partisjonene" #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Gjenoppretting fra fil %s mislykket: %s" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "Dårlig sikkerhetskopi-fil" #: ../../partition_table.pm_.c:796 #, c-format msgid "Error writing to file %s" msgstr "Feil ved skriving til fil %s" #: ../../partition_table/raw.pm_.c:192 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "Noe som ikke er bra skjer med disken din. \n" "En test for å sjekke dataintegritet var mislykket. \n" "Dette betyr at å skrive noe til disken vil av og til ende opp som ubrukelig" #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "må ha" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "viktig" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "veldig bra" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "bra" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "kanskje" #: ../../printer/data.pm_.c:18 msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../printer/data.pm_.c:19 msgid "PDQ" msgstr "PDQ" #: ../../printer/data.pm_.c:30 msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../printer/data.pm_.c:31 msgid "LPD" msgstr "LPD" #: ../../printer/data.pm_.c:51 msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../printer/data.pm_.c:52 msgid "LPRng" msgstr "LPRng" #: ../../printer/data.pm_.c:75 msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677 msgid "CUPS" msgstr "CUPS" #: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213 #: ../../printer/detect.pm_.c:250 #, fuzzy msgid "Unknown Model" msgstr "Ukjent modell" #: ../../printer/main.pm_.c:26 msgid "Local printer" msgstr "Lokal skriver" #: ../../printer/main.pm_.c:27 msgid "Remote printer" msgstr "Fjern-skriver" #: ../../printer/main.pm_.c:28 msgid "Printer on remote CUPS server" msgstr "Skriver på fjern-CUPS tjener" #: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835 msgid "Printer on remote lpd server" msgstr "Skriver på fjern-lpd tjener" #: ../../printer/main.pm_.c:30 msgid "Network printer (TCP/Socket)" msgstr "Nettverksskriver (TCP/Socket)" #: ../../printer/main.pm_.c:31 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Skriver på SMB/Windows 95/98/NT server" #: ../../printer/main.pm_.c:32 msgid "Printer on NetWare server" msgstr "Skriver på en NetWare tjener" #: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839 msgid "Enter a printer device URI" msgstr "Skriverenhetens URI" #: ../../printer/main.pm_.c:34 msgid "Pipe job into a command" msgstr "Pipe inn i kommando" #: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478 #: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228 msgid "Unknown model" msgstr "Ukjent modell" #: ../../printer/main.pm_.c:317 msgid "Local Printers" msgstr "Lokale skrivere" #: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678 msgid "Remote Printers" msgstr "Fjern-skrivere" #: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381 #, c-format msgid " on parallel port \\/*%s" msgstr " på parallelport \\/*%s" #: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB skriver \\/*%s" #: ../../printer/main.pm_.c:334 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", multifunksjonsenhet på parallelport \\/*%s" #: ../../printer/main.pm_.c:337 msgid ", multi-function device on USB" msgstr ", multifunksjonsenhet på USB" #: ../../printer/main.pm_.c:339 msgid ", multi-function device on HP JetDirect" msgstr ", multifunksjonsenhet på HP JetDirect" #: ../../printer/main.pm_.c:341 msgid ", multi-function device" msgstr ", multifunksjonsenhet" #: ../../printer/main.pm_.c:344 #, c-format msgid ", printing to %s" msgstr ", skriver til %s" #: ../../printer/main.pm_.c:346 #, fuzzy, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "på LPD tjener \"%s\", skriver \"%s\"" #: ../../printer/main.pm_.c:348 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP vert \"%s\", port %s" #: ../../printer/main.pm_.c:352 #, fuzzy, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "på Windows tjener \"%s\", del \"%s\"" #: ../../printer/main.pm_.c:356 #, fuzzy, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "på Novell tjener \"%s\", skriver \"%s\"" #: ../../printer/main.pm_.c:358 #, c-format msgid ", using command %s" msgstr ", bruker kommando %s" #: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603 msgid "Raw printer (No driver)" msgstr "Rå skriver (ingen driver)" #: ../../printer/main.pm_.c:647 #, c-format msgid "(on %s)" msgstr "(på %s)" #: ../../printer/main.pm_.c:649 msgid "(on this machine)" msgstr "(på denne maskin)" #: ../../printer/main.pm_.c:674 #, c-format msgid "On CUPS server \"%s\"" msgstr "På CUPS tjener \"%s\"" #: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888 #: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120 #: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197 #: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354 msgid " (Default)" msgstr " (Standard)" #: ../../printer/printerdrake.pm_.c:27 msgid "Select Printer Connection" msgstr "Velg skrivertilkobling" #: ../../printer/printerdrake.pm_.c:28 msgid "How is the printer connected?" msgstr "Hvordan er skriveren tilkoblet?" #: ../../printer/printerdrake.pm_.c:30 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "\n" "Skrivere på fjern CUPS tjenere trenger du ikke å konfigurere her; disse " "skriverene vil bli oppdaget automatisk." #: ../../printer/printerdrake.pm_.c:38 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950 msgid "CUPS configuration" msgstr "CUPS konfigurasjon" #: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951 msgid "Specify CUPS server" msgstr "Spesifiser CUPS tjener" #: ../../printer/printerdrake.pm_.c:83 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" "For å få tilgang til fjern CUPS-tjenere i ditt lokale nettverk trenger du " "ikke å konfigurere noen ting; CUPS-tjenerene informerer maskinen din " "automatisk om skriverene. Alle skriverene som før øyeblikket er kjent for " "maskinen din er listet i \"Remote printers\" seksjonen i hovedvinduet til " "Printerdrake. Når CUPS-tjeneren din ikke er i ditt lokale nettverk, må du " "entre CUPS-tjenerens IP-adresse og evnt. portnummeret for å få skriver- " "informasjon fra tjeneren, ellers la disse feltene være tomme." #: ../../printer/printerdrake.pm_.c:84 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" "\n" "Normalt er CUPS konfigurert automatisk ihht. til nettverksmiljøet ditt, så " "du kan ha tilgang til skrivere på CUPS-tjenerene i ditt lokale nettverk. " "Hvis dette ikke virker ordentlig, skru av \"Automatic CUPS configuration\" " "og rediger filen /etc/cups/cupsd.conf manuelt. Ikke glem å starte CUPS på " "nytt etterpå (kommando: \"service cups restart\")." #: ../../printer/printerdrake.pm_.c:88 msgid "The IP address should look like 192.168.1.20" msgstr "IP-adresse bør være i format 1.2.3.4" #: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041 msgid "The port number should be an integer!" msgstr "Portnummer burde være numerisk" #: ../../printer/printerdrake.pm_.c:99 msgid "CUPS server IP" msgstr "CUPS tjener IP" #: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061 #: ../../standalone/harddrake2_.c:63 msgid "Port" msgstr "Port" #: ../../printer/printerdrake.pm_.c:102 msgid "Automatic CUPS configuration" msgstr "Automatisk CUPS konfigurasjon" #: ../../printer/printerdrake.pm_.c:159 #, fuzzy msgid "Checking your system..." msgstr "Starter skriversystemet på nytt ..." #: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226 #: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481 #: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133 #: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343 #: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436 #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630 #: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701 #: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731 #: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809 #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911 #: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281 #: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369 #: ../../standalone/printerdrake_.c:47 msgid "Printerdrake" msgstr "Printerdrake" #: ../../printer/printerdrake.pm_.c:167 msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printer/printerdrake.pm_.c:179 #, fuzzy msgid "" "The following printers\n" "\n" msgstr "Følgende pakker vil bli fjernet" #: ../../printer/printerdrake.pm_.c:180 #, fuzzy msgid "" "The following printer\n" "\n" msgstr "Følgende pakker vil bli fjernet" #: ../../printer/printerdrake.pm_.c:182 msgid "" "\n" "and one unknown printer are " msgstr "" #: ../../printer/printerdrake.pm_.c:184 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "are " msgstr "" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "is " msgstr "" #: ../../printer/printerdrake.pm_.c:189 #, fuzzy msgid "directly connected to your system" msgstr "Ikke noe nettverksadapter i systemet ditt!" #: ../../printer/printerdrake.pm_.c:192 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm_.c:194 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm_.c:200 #, fuzzy msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Vennligst velg porten hvor skriveren din er koblet til." #: ../../printer/printerdrake.pm_.c:214 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm_.c:215 #, fuzzy msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "Ønsker du å sette denne skriveren (\"%s\")\n" "som standard skriver?" #: ../../printer/printerdrake.pm_.c:217 #, fuzzy msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Ønsker du å starte tilkoblingen din ved oppstart?" #: ../../printer/printerdrake.pm_.c:218 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printer/printerdrake.pm_.c:219 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270 #: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933 #: ../../printer/printerdrake.pm_.c:3060 msgid "Add a new printer" msgstr "Legg til en ny skriver" #: ../../printer/printerdrake.pm_.c:259 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Velkommen til Skriverveiviseren\n" "\n" "Denne veiviseren lar deg installere lokale eller fjernskrivere som kan bli " "brukt fra denne maskin, og også fra andre maskiner i nettverket.\n" "\n" "Den spør etter all nødvendig informasjon for å sette opp skriveren og gir " "deg tilgang til alle tilgjengelige skriverdrivere, drivervalg og skriver " "tilkoblinger." #: ../../printer/printerdrake.pm_.c:272 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:289 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:307 #, fuzzy msgid "Auto-detect printers connected to this machine" msgstr "Finn skrivere automatisk" #: ../../printer/printerdrake.pm_.c:310 msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printer/printerdrake.pm_.c:313 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printer/printerdrake.pm_.c:329 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "Gratulerer, din skriver er nå installert og konfigurert!\n" "\n" "Du kan skrive ut med \"Skriv ut\" kommandoen til ditt program (vanligvis i " "\"Fil\" menyen).\n" "\n" "Hvis du ønsker å legge til, fjerne, eller gi en skriver ett nytt navn, eller " "vis du ønsker å gjøre om standard valg (papir, utskriftkvalitet, .....), " "velg \"Skriver\" i \"Hardware\" delen av Mandrake Control Center." #: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538 #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 #, fuzzy msgid "Printer auto-detection" msgstr "Utfør automatisk detektering" #: ../../printer/printerdrake.pm_.c:385 #, fuzzy, c-format msgid ", network printer \"%s\", port %s" msgstr ", TCP/IP vert \"%s\", port %s" #: ../../printer/printerdrake.pm_.c:387 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Skriver på SMB/Windows 95/98/NT server" #: ../../printer/printerdrake.pm_.c:391 #, c-format msgid "Detected %s" msgstr "Oppdaget %s" #: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423 #: ../../printer/printerdrake.pm_.c:440 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "Skriver på parallelport \\/*%s" #: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425 #: ../../printer/printerdrake.pm_.c:443 #, c-format msgid "USB printer \\/*%s" msgstr "USB skriver \\/*%s" #: ../../printer/printerdrake.pm_.c:399 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Nettverksskriver (TCP/Socket)" #: ../../printer/printerdrake.pm_.c:401 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Skriver på SMB/Windows 95/98/NT server" #: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547 msgid "Local Printer" msgstr "Lokal skriver" #: ../../printer/printerdrake.pm_.c:526 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Ingen lokal skriver funnet! For manuelt å installere en skriver entre et " "enhets-navn/filnavn i input-linjen (Parallelporter: /dev/lp0, /dev/lp1, ..., " "lik LPT1:, LPT2:, ..., 1st USB skriver: /dev/usb/lp0, 2nd USB skriver: /dev/" "usb/lp1, ...)." #: ../../printer/printerdrake.pm_.c:530 msgid "You must enter a device or file name!" msgstr "Du må legge til en enhet eller et filnavn!" #: ../../printer/printerdrake.pm_.c:539 #, fuzzy msgid "No printer found!" msgstr "Ingen lokal skriver funnet!\n" #: ../../printer/printerdrake.pm_.c:548 #, fuzzy msgid "Available printers" msgstr "Lokal skriver" #: ../../printer/printerdrake.pm_.c:552 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm_.c:553 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm_.c:555 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printer/printerdrake.pm_.c:556 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm_.c:558 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Vennligst velg en port hvor skriveren din er tilkoblet eller entre en enhet " "navn/filnavn i input-linjen" #: ../../printer/printerdrake.pm_.c:559 msgid "Please choose the port where your printer is connected to." msgstr "Vennligst velg porten hvor skriveren din er koblet til." #: ../../printer/printerdrake.pm_.c:561 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Parallelporter: /dev/lp0, /dev/lp1, ..., lik LPT1:, LPT2:, ..., 1st USB " "skriver: /dev/usb/lp0, 2nd USB skriver: /dev/usb/lp1, ...)." #: ../../printer/printerdrake.pm_.c:565 msgid "You must choose/enter a printer/device!" msgstr "Du må velge/entre en skriver/enhet!" #: ../../printer/printerdrake.pm_.c:584 msgid "Manual configuration" msgstr "Manuell konfigurasjon" #: ../../printer/printerdrake.pm_.c:633 msgid "Remote lpd Printer Options" msgstr "Opsjoner for fjern-lpd skriver" #: ../../printer/printerdrake.pm_.c:634 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "For å bruke en fjern-lpd skriverkø, må du oppgi vertsnavnet til skriver- " "tjeneren og skrivernavnet på denne tjeneren." #: ../../printer/printerdrake.pm_.c:635 msgid "Remote host name" msgstr "Fjern-vertsnavn" #: ../../printer/printerdrake.pm_.c:636 msgid "Remote printer name" msgstr "Fjern-skrivers navn" #: ../../printer/printerdrake.pm_.c:639 msgid "Remote host name missing!" msgstr "Det eksterne vertsnavnet mangler!" #: ../../printer/printerdrake.pm_.c:643 msgid "Remote printer name missing!" msgstr "Det eksterne vertsnavnet mangler!" #: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "Oppdaget %s" #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 #, fuzzy msgid "Scanning network..." msgstr "Starter nettverk ..." #: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772 #, fuzzy, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "på Windows tjener \"%s\", del \"%s\"" #: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Skriver ut på skriver \"%s\"" #: ../../printer/printerdrake.pm_.c:795 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opsjoner for SMB (Windows 9x/NT) skriver" #: ../../printer/printerdrake.pm_.c:796 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "For å skrive til en SMB-skriver, må du oppgi SMB-vertsnavnet (Merk! Dette " "kan være forskjellig fra dens TCP/IP-vertsnavn!) og muligens IP-adressen til " "skrivertjeneren, så vel som det delte navnet til skriveren du ønsker tilgang " "til og anvendelige brukernavn, passord og arbeidsgruppeinformasjon." #: ../../printer/printerdrake.pm_.c:797 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printer/printerdrake.pm_.c:799 msgid "SMB server host" msgstr "SMB-tjener vert" #: ../../printer/printerdrake.pm_.c:800 msgid "SMB server IP" msgstr "SMB-tjener IP" #: ../../printer/printerdrake.pm_.c:801 msgid "Share name" msgstr "Navn deling" #: ../../printer/printerdrake.pm_.c:804 msgid "Workgroup" msgstr "Arbeidsgruppe" #: ../../printer/printerdrake.pm_.c:806 #, fuzzy msgid "Auto-detected" msgstr "Utfør automatisk detektering" #: ../../printer/printerdrake.pm_.c:816 msgid "Either the server name or the server's IP must be given!" msgstr "Servernavnet eller serverens IP må oppgis!" #: ../../printer/printerdrake.pm_.c:820 msgid "Samba share name missing!" msgstr "Samba delenavn mangler!" #: ../../printer/printerdrake.pm_.c:826 msgid "SECURITY WARNING!" msgstr "" #: ../../printer/printerdrake.pm_.c:827 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:837 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:840 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printer/printerdrake.pm_.c:911 msgid "NetWare Printer Options" msgstr "NetWare skriveropsjoner" #: ../../printer/printerdrake.pm_.c:912 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "For å skrive til en NetWare-skriver, må du oppgi navnet til NetWare-" "skrivertjeneren (Mer! Dette kan være forskjellig fra dens TCP/IP-vertsnavn!) " "så vel som navnet på skriverkøen til skriveren du ønsker adgang til og " "anvendelige brukernavn og passord." #: ../../printer/printerdrake.pm_.c:913 msgid "Printer Server" msgstr "Skrivertjener" #: ../../printer/printerdrake.pm_.c:914 msgid "Print Queue Name" msgstr "Skriverkø-navn" #: ../../printer/printerdrake.pm_.c:919 msgid "NCP server name missing!" msgstr "NCP servernavn mangler!" #: ../../printer/printerdrake.pm_.c:923 msgid "NCP queue name missing!" msgstr "NCP kønavn mangler!" #: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007 #, fuzzy, c-format msgid ", host \"%s\", port %s" msgstr ", TCP/IP vert \"%s\", port %s" #: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010 #, fuzzy, c-format msgid "Host \"%s\", port %s" msgstr ", TCP/IP vert \"%s\", port %s" #: ../../printer/printerdrake.pm_.c:1030 msgid "TCP/Socket Printer Options" msgstr "TCP/Socket skrivervalg" #: ../../printer/printerdrake.pm_.c:1032 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" #: ../../printer/printerdrake.pm_.c:1033 #, fuzzy msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "For å skrive til en TCP eller socket skriver, må du oppgi vertsnavnet til " "skriveren, og eventuelt portnummeret. På HP JetDirect tjenere er " "portnummeret vanligvis 9100, på andre tjenere kan dette variere. Sjekk " "manualen til maskinvaren din." #: ../../printer/printerdrake.pm_.c:1037 #, fuzzy msgid "Printer host name or IP missing!" msgstr "Skriverens vertsnavn mangler!" #: ../../printer/printerdrake.pm_.c:1059 #, fuzzy msgid "Printer host name or IP" msgstr "Skriverens vertsnavn" #: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109 msgid "Printer Device URI" msgstr "Skriverenhet URI" #: ../../printer/printerdrake.pm_.c:1108 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Du kan direkte oppgi URI til skriveren. URIen må være i henhold til enten " "CUPS eller Foomatic standarden. Ikke alle typer URIer støttes av " "købehandlerene." #: ../../printer/printerdrake.pm_.c:1123 msgid "A valid URI must be entered!" msgstr "En korrekt URI må oppgis!" #: ../../printer/printerdrake.pm_.c:1463 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Alle skrivere trenger ett navn (f.eks. \"skriver\"). Beskrivelsen og " "lokalisasjonsfeltene trenger ikke å fylles inn. De er brukerkommentarer." #: ../../printer/printerdrake.pm_.c:1464 msgid "Name of printer" msgstr "Navn på skriver" #: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38 msgid "Description" msgstr "Beskrivelse" #: ../../printer/printerdrake.pm_.c:1466 msgid "Location" msgstr "Lokasjon" #: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599 msgid "Reading printer database..." msgstr "Leser skriverdatabase ..." #: ../../printer/printerdrake.pm_.c:1482 msgid "Preparing printer database..." msgstr "Forbereder skriverdatabase ..." #: ../../printer/printerdrake.pm_.c:1578 msgid "Your printer model" msgstr "Din skrivermodell" #: ../../printer/printerdrake.pm_.c:1579 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake har sammenlignet modellnavnet fra autooppdaging av skriveremed " "modellene oppgitt i skriverdatabasen for å finne beste match. match. Dette " "valget kan være feil, spesielt hvis skriveren din ikke er oppgitt i det hele " "tatt i databasen. Sjekk om valget er riktig og klikk \"Modellen er riktig\" " "hvis den er det eller hvis ikke, klikk \"Velg modell manuellt\" så du kan " "velge skrivermodellen din manuellt i neste skjerm.\n" "\n" "Printerdrake har for skriveren din funnet:\n" "\n" "%s" #: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587 msgid "The model is correct" msgstr "Modellen er riktig" #: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586 #: ../../printer/printerdrake.pm_.c:1589 msgid "Select model manually" msgstr "Velg modell manuellt" #: ../../printer/printerdrake.pm_.c:1606 msgid "Printer model selection" msgstr "Skrivervalg" #: ../../printer/printerdrake.pm_.c:1607 msgid "Which printer model do you have?" msgstr "Hva slags type skriver har du?" #: ../../printer/printerdrake.pm_.c:1608 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" "\n" "\n" "Sjekk om Printerdrake gjorde autooppdagelsen av din skrivermodell riktig. " "Søk korrekt modell i listen når pekeren står over en feil modell eller på " "\"Rå skriver\"." #: ../../printer/printerdrake.pm_.c:1611 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Hvis din skriver ikke finnes i listen velg en kompatibel (se i " "skrivermanualen) eller en lignende." #: ../../printer/printerdrake.pm_.c:1697 msgid "OKI winprinter configuration" msgstr "OKI winprinter konfigurasjon" #: ../../printer/printerdrake.pm_.c:1698 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Du konfigurerer en OKI laser winprinter. Disse skriverene bruker en veldig\n" "spesiell kommunikasjonsprotokoll og virker derfor bare når de er koblet " "tilden første parallelporten. Når skriveren er koblet til en annen port " "eller til en skrivertjenerboks koble skriveren til den første parallelporten " "før du skriver en testside. Ellers vil ikke skriveren virke. Innstillinger " "for oppkoblingstype vil bli ignorert av driveren." #: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745 msgid "Lexmark inkjet configuration" msgstr "Lexmark inkjet konfigurasjon" #: ../../printer/printerdrake.pm_.c:1719 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Inkjet skriverdrivere fra Lexmark støtter bare lokale skrivere, ingen " "skrivere på fjernmaskiner eller skrivertjenerbokser. Koble skriveren til en " "lokal port eller konfigurer den på maskinen hvor det er koblet til." #: ../../printer/printerdrake.pm_.c:1746 #, fuzzy msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "For å kunne skrive med din Lexmark inkjet og denne konfigurasjonen, trenger " "du inkjet skriverdriverene fra Lexmark (http://www.lexmark.com/). Gå til US " "web-stedet og klikk på \"Drivers\" knappen. Velg så din modell og etterpå " "\"Linux\" som operativsystem. Driveren kommer som RPM-pakker eller skall- " "skript med interaktiv grafisk installasjon. Du trenger ikke å gjøre denne " "konfigurasjonen fra det grafiske grensesnittet. Abryt direkte etter license " "agreement. Skriv så skriverhode alignment sider med \"lexmarkmaintain\" og " "juster hode alignment innstillinger med dette programmet." #: ../../printer/printerdrake.pm_.c:1749 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printer/printerdrake.pm_.c:1750 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:1972 #, fuzzy msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Standardskriverens instillinger\n" "Du bør sjekke at sidestørrelsen og blekktypen\n" "er satt riktig. Merk deg at veldig god utskriftskvalitet\n" "kan gjøre utskriften treg." #: ../../printer/printerdrake.pm_.c:1981 #, c-format msgid "Option %s must be an integer number!" msgstr "Valg %s må være ett helt tall!" #: ../../printer/printerdrake.pm_.c:1985 #, c-format msgid "Option %s must be a number!" msgstr "Valg %s må være ett tall!" #: ../../printer/printerdrake.pm_.c:1989 #, c-format msgid "Option %s out of range!" msgstr "Valg %s er utenfor rekkevidden!" #: ../../printer/printerdrake.pm_.c:2028 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Ønsker du å sette denne skriveren (\"%s\")\n" "som standard skriver?" #: ../../printer/printerdrake.pm_.c:2051 msgid "Test pages" msgstr "Testsider" #: ../../printer/printerdrake.pm_.c:2052 #, fuzzy msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Vennligst velg testsidene du ønsker å skrive ut.\n" "Merk deg, fototestsiden kan ta lang tid å skrive ut,\n" "og på laserskrivere med for lite minne vil den ikke\n" "skrives ut i det hele tatt. Som regel vil det holde å\n" "skrive ut standard testside." #: ../../printer/printerdrake.pm_.c:2056 msgid "No test pages" msgstr "Ingen testsider" #: ../../printer/printerdrake.pm_.c:2057 msgid "Print" msgstr "Skriv ut" #: ../../printer/printerdrake.pm_.c:2114 msgid "Standard test page" msgstr "Standard testside" #: ../../printer/printerdrake.pm_.c:2117 msgid "Alternative test page (Letter)" msgstr "Alternativ testside (letter)" #: ../../printer/printerdrake.pm_.c:2120 msgid "Alternative test page (A4)" msgstr "Alternativ testside (A4)" #: ../../printer/printerdrake.pm_.c:2122 msgid "Photo test page" msgstr "Fototestside" #: ../../printer/printerdrake.pm_.c:2126 msgid "Do not print any test page" msgstr "Ikke skriv ut noen testside" #: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285 msgid "Printing test page(s)..." msgstr "Skriver ut testside(r)..." #: ../../printer/printerdrake.pm_.c:2159 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Testsiden(e) har blitt sendt til skriver-daemonen.\n" "Det kan ta litt tid før skriveren starter.\n" "Utskriftstatus:\n" "%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2163 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Testsiden(e) har blitt sendt til skriver-daemonen.\n" "Det kan ta litt tid før skriveren starter.\n" #: ../../printer/printerdrake.pm_.c:2170 msgid "Did it work properly?" msgstr "Virker det som det skal?" #: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229 msgid "Raw printer" msgstr "Rå skriver" #: ../../printer/printerdrake.pm_.c:2216 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2218 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238 #: ../../printer/printerdrake.pm_.c:2248 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264 #, fuzzy, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" "Får å få en liste over tilgjengelige valg for nåværende skriver klikk på " "\"Print option list\" knappen." #: ../../printer/printerdrake.pm_.c:2228 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245 #: ../../printer/printerdrake.pm_.c:2255 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Får å få en liste over tilgjengelige valg for nåværende skriver klikk på " "\"Print option list\" knappen." #: ../../printer/printerdrake.pm_.c:2253 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Får å skrive ut en fil fra kommandolinjen (terminalvindu) bruk kommandoen \"%" "s \" eller \"%s \".\n" #: ../../printer/printerdrake.pm_.c:2257 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2261 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2271 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Skriver ut/Skanner på \"%s\"" #: ../../printer/printerdrake.pm_.c:2272 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Skriver ut/Skanner på \"%s\"" #: ../../printer/printerdrake.pm_.c:2274 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Skriver ut/Skanner på \"%s\"" #: ../../printer/printerdrake.pm_.c:2275 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Skriver ut på skriver \"%s\"" #: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281 #: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283 #: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307 #: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156 #: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695 #: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118 msgid "Close" msgstr "Lukk" #: ../../printer/printerdrake.pm_.c:2281 msgid "Print option list" msgstr "Skriv ut liste over valg" #: ../../printer/printerdrake.pm_.c:2301 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printer/printerdrake.pm_.c:2322 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702 #: ../../printer/printerdrake.pm_.c:2990 msgid "Reading printer data..." msgstr "Leser skriverdata: ..." #: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391 #: ../../printer/printerdrake.pm_.c:2426 msgid "Transfer printer configuration" msgstr "Overfør skriverkonfigurasjon" #: ../../printer/printerdrake.pm_.c:2365 #, fuzzy, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Du kan kopiere skriverkonfigurasjonen du har satt opp for køtjeneren\n" "%s til %s, din nåværende køtjener. All konfigurasjonsdata (skrivernavn,\n" "beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n" "ikke jobber.\n" "Ikke alle køer kan overføres grunnet:\n" #: ../../printer/printerdrake.pm_.c:2368 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS støtter ikke skrivere på Novelltjenere eller skrivere som sender " "dataene inn i en fritt formet kommando.\n" #: ../../printer/printerdrake.pm_.c:2370 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ støtter bare lokale skrivere, fjern-LPD skrivere, og Socket/TCP " "skrivere.\n" #: ../../printer/printerdrake.pm_.c:2372 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD og LPRng støtter ikke IPP skrivere.\n" #: ../../printer/printerdrake.pm_.c:2374 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "I tillegg, køer laget med dette programmet eller \"foomatic -configure\" kan " "ikke overflyttes." #: ../../printer/printerdrake.pm_.c:2375 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Skrivere konfigurert med PPD filene som produsenten har laget eller med CUPS " "drivere ikke ikke overflyttes." #: ../../printer/printerdrake.pm_.c:2376 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Velg skriverene som du vil overflytte og klikk\n" "\"Overfør\"." #: ../../printer/printerdrake.pm_.c:2379 msgid "Do not transfer printers" msgstr "Ikke overfør skrivere" #: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396 msgid "Transfer" msgstr "Overfør" #: ../../printer/printerdrake.pm_.c:2392 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "En skriver med navnet \"%s\" eksisterer allerede på %s. \n" "Klikk \"Overfør\" for å overskrive.\n" "Du kan også gi ett nytt skrivernavn, eller hoppe over denne skriveren." #: ../../printer/printerdrake.pm_.c:2400 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Skrivernavn bør inneholde kun bokstaver, tall og understrek" #: ../../printer/printerdrake.pm_.c:2405 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Skriveren \"%s\" eksisterer allerede,\n" "ønsker du å overskrive dens konfigurasjon?" #: ../../printer/printerdrake.pm_.c:2413 msgid "New printer name" msgstr "Nytt skrivernavn" #: ../../printer/printerdrake.pm_.c:2416 #, c-format msgid "Transferring %s..." msgstr "Overfører %s ..." #: ../../printer/printerdrake.pm_.c:2427 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../printer/printerdrake.pm_.c:2437 msgid "Refreshing printer data..." msgstr "Frisker opp skriverdata ..." #: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516 #: ../../printer/printerdrake.pm_.c:2528 msgid "Configuration of a remote printer" msgstr "Konfigurasjon av en fjernskriver" #: ../../printer/printerdrake.pm_.c:2446 msgid "Starting network..." msgstr "Starter nettverk ..." #: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483 #: ../../printer/printerdrake.pm_.c:2485 msgid "Configure the network now" msgstr "Konfigurer nettverket nå" #: ../../printer/printerdrake.pm_.c:2480 msgid "Network functionality not configured" msgstr "Nettverksfunksjonalitet ikke konfigurert" #: ../../printer/printerdrake.pm_.c:2481 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm_.c:2484 msgid "Go on without configuring the network" msgstr "Fortsett uten å konfigurere nettverket" #: ../../printer/printerdrake.pm_.c:2518 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../printer/printerdrake.pm_.c:2519 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../printer/printerdrake.pm_.c:2529 msgid "Restarting printing system..." msgstr "Starter skriversystemet på nytt ..." #: ../../printer/printerdrake.pm_.c:2568 msgid "high" msgstr "høy" #: ../../printer/printerdrake.pm_.c:2568 msgid "paranoid" msgstr "paranoid" #: ../../printer/printerdrake.pm_.c:2569 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Installerer et utskriftsystem på %s sikkerhetsnivået" #: ../../printer/printerdrake.pm_.c:2570 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm_.c:2604 msgid "Starting the printing system at boot time" msgstr "Starter utskriftsystemet ved oppstart" #: ../../printer/printerdrake.pm_.c:2605 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765 msgid "Checking installed software..." msgstr "Sjekker installert programvare..." #: ../../printer/printerdrake.pm_.c:2630 #, fuzzy, c-format msgid "Removing %s ..." msgstr "Fjerner %s" #: ../../printer/printerdrake.pm_.c:2636 #, fuzzy, c-format msgid "Installing %s ..." msgstr "Installerer pakke..." #: ../../printer/printerdrake.pm_.c:2685 msgid "Select Printer Spooler" msgstr "Velg skrivertkøbehandler" #: ../../printer/printerdrake.pm_.c:2686 msgid "Which printing system (spooler) do you want to use?" msgstr "Hvilket utskriftsystem (spooler) ønsker du å bruke?" #: ../../printer/printerdrake.pm_.c:2720 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Konfigurerer skriver \"%s\" ..." #: ../../printer/printerdrake.pm_.c:2731 msgid "Installing Foomatic..." msgstr "Installerer Foomatic ..." #: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838 #: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300 msgid "Printer options" msgstr "Opsjoner for skriver" #: ../../printer/printerdrake.pm_.c:2810 #, fuzzy msgid "Preparing Printerdrake..." msgstr "Klargjører PrinterDrake ..." #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369 msgid "Configuring applications..." msgstr "Konfigurerer applikasjoner..." #: ../../printer/printerdrake.pm_.c:2845 msgid "Would you like to configure printing?" msgstr "Ønsker du å konfigurere en skriver?" #: ../../printer/printerdrake.pm_.c:2857 msgid "Printing system: " msgstr "Utskriftssystem: " #: ../../printer/printerdrake.pm_.c:2915 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" "Her er følgende skriverkø.\n" "Du kan legge til flere eller endre de eksisterende." #: ../../printer/printerdrake.pm_.c:2916 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Her er følgende skriverkø.\n" "Du kan legge til flere eller endre de eksisterende." #: ../../printer/printerdrake.pm_.c:2942 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "Frisker opp skriverliste (for å vise alle tilgjengelige CUPS skrivere)" #: ../../printer/printerdrake.pm_.c:2960 msgid "Change the printing system" msgstr "Endrer utskriftssystemet" #: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274 msgid "Normal Mode" msgstr "Normalt modus" #: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176 #: ../../printer/printerdrake.pm_.c:3363 msgid "Do you want to configure another printer?" msgstr "Ønsker du å konfigurere enda en skriver?" #: ../../printer/printerdrake.pm_.c:3211 msgid "Modify printer configuration" msgstr "Modifiser skriverkonfigurasjon" #: ../../printer/printerdrake.pm_.c:3213 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Skriver %s\n" "Hva ønsker du å forandre på denne skriveren?" #: ../../printer/printerdrake.pm_.c:3217 msgid "Do it!" msgstr "Gjør det!" #: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271 msgid "Printer connection type" msgstr "Skrivertilkoblingstype" #: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275 msgid "Printer name, description, location" msgstr "Skrivernavn, beskrivelse, sted" #: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293 msgid "Printer manufacturer, model, driver" msgstr "Skriverprodusent, modell, driver" #: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294 msgid "Printer manufacturer, model" msgstr "Skriverprodusent, modell" #: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304 msgid "Set this printer as the default" msgstr "Sett denne skriveren som standard" #: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Legg denne skriveren til Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Fjern denne skriveren fra Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319 msgid "Print test pages" msgstr "Skriver ut testsider" #: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321 msgid "Know how to use this printer" msgstr "Vet hvordan man skal bruke denne skriveren" #: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323 msgid "Remove printer" msgstr "Fjern skriver" #: ../../printer/printerdrake.pm_.c:3282 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Fjerner gammel skriver \"%s\" ..." #: ../../printer/printerdrake.pm_.c:3307 msgid "Default printer" msgstr "Standardskriver" #: ../../printer/printerdrake.pm_.c:3308 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Skriveren \"%s\" er nå satt til standard skriver." #: ../../printer/printerdrake.pm_.c:3310 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Legger skriver til Star Office/OpenOffice.org/GIMP" #: ../../printer/printerdrake.pm_.c:3312 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "Skriveren \"%s\" ble vellykket lagt til Star Office/OpenOffice.org/GIMP." #: ../../printer/printerdrake.pm_.c:3313 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3315 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm_.c:3317 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3318 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3325 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Ønsker du virkelig å fjerne skriveren \"%s\"?" #: ../../printer/printerdrake.pm_.c:3329 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Fjerner skriver \"%s\" ..." #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid mislykket" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid mislykket (kanskje raidtool mangler?)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Ikke nok partisjoner for RAID nivå %d\n" #: ../../security/main.pm_.c:36 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" #: ../../security/main.pm_.c:66 #, fuzzy msgid "Security Level:" msgstr "Sikkerhetsnivå" #: ../../security/main.pm_.c:77 #, fuzzy, c-format msgid " (default value: %s)" msgstr " (Standard)" #: ../../security/main.pm_.c:113 #, fuzzy msgid "Security Alerts:" msgstr "Sikkerhetsnivå" #: ../../security/main.pm_.c:115 #, fuzzy msgid "Security Administrator:" msgstr "Fjernadministrasjon" #: ../../security/main.pm_.c:128 #, fuzzy msgid "Network Options" msgstr "Modulopsjoner:" #: ../../security/main.pm_.c:128 #, fuzzy msgid "System Options" msgstr "Modulopsjoner:" #: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" #: ../../security/main.pm_.c:177 msgid "Periodic Checks" msgstr "" #: ../../security/main.pm_.c:191 #, fuzzy msgid "Please wait, setting security level..." msgstr "Setter sikkerhetsnivå" #: ../../security/main.pm_.c:197 #, fuzzy msgid "Please wait, setting security options..." msgstr "Vennligst vent, forbereder installasjon" #: ../../services.pm_.c:19 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem" #: ../../services.pm_.c:20 msgid "Anacron a periodic command scheduler." msgstr "Anacron en periodisk kommandoplanlegger." #: ../../services.pm_.c:21 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd blir brukt til overvåkning av batteristatus og logging av dette via " "syslog.\n" "Kan også brukes til å slå av maskinen når batteriet er dårlig." #: ../../services.pm_.c:23 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Kjører kommandoer planlagt av at kommandoen ved tidspunkt spesifisert når\n" "at ble kjørt, og kjører batch kommandoer når lastingsmengden er lav nok." #: ../../services.pm_.c:25 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron er et standard UNIX-program som kjører brukerspesifiserte programmer\n" "ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig " "UNIX cron,\n" "inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner." #: ../../services.pm_.c:28 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM gir musestøtte til tekstbaserte Linux applikasjoner som\n" "Midnight Commander. Den lar også musebaserte konsoller foreta klipp-og-lim " "operasjoner,\n" "og inkluderer støtte for pop-up menyer i konsollen." #: ../../services.pm_.c:31 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake kjører et maskinvaresøk, og kan konfigurere ny/endret\n" "maskinvare." #: ../../services.pm_.c:33 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache er en World Wide Web tjener. Den blir brukt til å tjene HTML-filer\n" "og CGI." #: ../../services.pm_.c:34 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n" "varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for å " "starte\n" "mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd " "stopper\n" "alle tjenestene den er ansvarlig for." #: ../../services.pm_.c:38 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Start pakkefiltrering for Linux kjerne 2.2 serien for å sette\n" "opp en brannmur for å beskytte maskinen din fra nettverksangrep." #: ../../services.pm_.c:40 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Denne pakken laster det valgte tastaturkartet som er satt i\n" "/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig " "verktøyet.\n" "For de fleste maskiner bør dette være aktivert." #: ../../services.pm_.c:43 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Automatisk regenerering av kjernehode i /boot for\n" "/usr/include/linux/{autoconf,version}.h" #: ../../services.pm_.c:45 msgid "Automatic detection and configuration of hardware at boot." msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart." #: ../../services.pm_.c:46 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf vil noen ganger arrangere utførelse av forskjellige\n" "oppgaver ved oppstart for å vedlikeholde systemkonfigurasjon." #: ../../services.pm_.c:48 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd er skriverdaemonen som behøves for at lpr skal virke ordentlig. Den er\n" "i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)." #: ../../services.pm_.c:50 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, brukt for å bygge en tjener med høy ytelse og\n" "tilgjengelighet." #: ../../services.pm_.c:52 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) er en Domain Name Server (DNS) som brukes til å bestemme " "vertsnavn til IP-adresser." #: ../../services.pm_.c:53 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Monterer og demonterer alle Network File System (NFS), SMB (Lan\n" "Manager/Windows), og NCP (NetWare) monteringspunkter." #: ../../services.pm_.c:55 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til å starte\n" "ved oppstart." #: ../../services.pm_.c:57 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n" "Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n" "/etc/exports filen." #: ../../services.pm_.c:60 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n" "Denne tjenesten tilbyr NFS fillåsing funksjonalitet." #: ../../services.pm_.c:62 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Slår automatisk på numlock-tast i konsoll og XFree ved\n" "oppstart." #: ../../services.pm_.c:64 msgid "Support the OKI 4w and compatible winprinters." msgstr "Støtter OKI 4w og kompatible winskrivere." #: ../../services.pm_.c:65 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA støtte er vanligvis støtte for ting som ethernet og\n" "modem i bærbare PC'er. Den vil ikke starte uten konfigurasjon så det er " "trygt\n" "å ha denne installert på maskiner som ikke trenger det." #: ../../services.pm_.c:68 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper håndterer RPC-tilknytninger, som brukes av protokoller\n" "som NFS og NIS. Portmap-tjeneren må kjøres på maskiner som brukes som\n" "tjenere for protokoller som bruker RPC-mekanismen." #: ../../services.pm_.c:71 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix er en posttransporteringsagent, som er et program som flytter post " "fra en maskin til en annen." #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Lagrer og gjenoppretter system entropy pool for høyere kvalitet på\n" "tilfeldig nummergenerering." #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "Tilordne rå enheter til blokkenheter (som harddisk-\n" "partisjoner) for bruk av applikasjoner som Oracle" #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n" "RIP-protokollen. Mens RIP er mye brukt på små nettverk, trengs mere " "komplekse\n" "rutingprotokoller for komplekse nettverk." #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat protokollen lar brukere på et nettverk finne ytelses-\n" "metrikser for alle maskinene på nettverket." #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers protokollen lar brukere på et nettverk identifisere hvem som\n" "er logget inn på andre maskiner." #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n" "som er logget på en maskin som kjører rwho-daemonen (lik finger)." #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "Start lydsystemet på maskinen din" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog er en fasilitet som mange daemoner bruker til å logge beskjeder\n" "til forskjellige systemloggfiler. Det er en god ide å alltid kjøre syslog." #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "Last driverene for dine usb enheter." #: ../../services.pm_.c:89 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Starter X-font tjeneren (dette er obligatorisk for at XFree skal kjøre)." #: ../../services.pm_.c:115 ../../services.pm_.c:157 msgid "Choose which services should be automatically started at boot time" msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart" #: ../../services.pm_.c:127 msgid "Printing" msgstr "Skriver ut" #: ../../services.pm_.c:128 msgid "Internet" msgstr "Internett" #: ../../services.pm_.c:131 msgid "File sharing" msgstr "Fildeling" #: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709 msgid "System" msgstr "System" #: ../../services.pm_.c:138 msgid "Remote Administration" msgstr "Fjernadministrasjon" #: ../../services.pm_.c:146 msgid "Database Server" msgstr "Databasetjener" #: ../../services.pm_.c:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Tjenester: %d aktivert for %d registrert" #: ../../services.pm_.c:191 msgid "Services" msgstr "Tjenester" #: ../../services.pm_.c:203 msgid "running" msgstr "kjører" #: ../../services.pm_.c:203 msgid "stopped" msgstr "stoppet" #: ../../services.pm_.c:217 msgid "Services and deamons" msgstr "Tjenester og daemoner" #: ../../services.pm_.c:222 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Ingen tilleggsinformasjon\n" "om denne tjenesten, begklager." #: ../../services.pm_.c:229 msgid "On boot" msgstr "Ved oppstart" #: ../../services.pm_.c:241 msgid "Start" msgstr "Start" #: ../../services.pm_.c:241 msgid "Stop" msgstr "Stopp" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "Takk for at du valgte Mandrake Linux 9.0" #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "Velkommen til åpen kilde verdenen" #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/02-community.pl_.c:9 #, fuzzy msgid "Get involved in the Free Software world" msgstr "Protokoll for resten av verden" #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" #: ../../share/advertising/03-internet.pl_.c:9 #, fuzzy msgid "Get the most from the Internet" msgstr "Koble opp mot Internett" #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "Spill" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "" #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49 msgid "Mandrake Control Center" msgstr "Mandrake kontrollpanel" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "" #: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "Brukergrensesnitt" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" #: ../../share/advertising/08-development.pl_.c:9 #, fuzzy msgid "Development simplified" msgstr "Utvikling" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:9 #, fuzzy msgid "Become a MandrakeExpert" msgstr "MandrakeExpert" #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 #, fuzzy msgid "MandrakeExpert Corporate" msgstr "MandrakeExpert" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" #: ../../standalone.pm_.c:21 msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../standalone.pm_.c:40 msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version name.\n" msgstr "" #: ../../standalone.pm_.c:51 msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm_.c:57 msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm_.c:68 msgid "" "[OPTIONS]...\n" "\t --debug print debugging information" msgstr "" #: ../../standalone.pm_.c:70 msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm_.c:82 #, fuzzy msgid "[keyboard]" msgstr "Tastatur" #: ../../standalone.pm_.c:83 msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm_.c:84 msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm_.c:93 msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm_.c:94 msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm_.c:99 msgid "" "[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] " "[--dynamic=dev]" msgstr "" #: ../../standalone.pm_.c:100 msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm_.c:114 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm_.c:168 msgid "Installing packages..." msgstr "Installerer pakke..." #: ../../standalone/XFdrake_.c:138 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Vennligst logg ut og bruk så Ctrl-Alt-BackSpace" #: ../../standalone/XFdrake_.c:142 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Vennligst logg inn i %s på nytt for å aktivere endringene" #: ../../standalone/drakTermServ_.c:239 #, fuzzy msgid "Mandrake Terminal Server Configuration" msgstr "Overfør skriverkonfigurasjon" #: ../../standalone/drakTermServ_.c:253 #, fuzzy msgid "Enable Server" msgstr "Databasetjener" #: ../../standalone/drakTermServ_.c:260 #, fuzzy msgid "Disable Server" msgstr "Databasetjener" #: ../../standalone/drakTermServ_.c:268 #, fuzzy msgid "Start Server" msgstr "NIS-tjener" #: ../../standalone/drakTermServ_.c:275 #, fuzzy msgid "Stop Server" msgstr "NIS-tjener" #: ../../standalone/drakTermServ_.c:283 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:288 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:294 #, fuzzy msgid "Add/Del Users" msgstr "Legg til bruker" #: ../../standalone/drakTermServ_.c:299 #, fuzzy msgid "Add/Del Clients" msgstr "DHCP-klient" #: ../../standalone/drakTermServ_.c:328 msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:332 msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:365 msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t/*type fat;*/\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"/*type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"*/\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/" "etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:488 msgid "Boot Floppy" msgstr "" #: ../../standalone/drakTermServ_.c:490 msgid "Boot ISO" msgstr "" #: ../../standalone/drakTermServ_.c:559 msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591 msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ_.c:573 msgid "No kernel selected!" msgstr "" #: ../../standalone/drakTermServ_.c:576 msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ_.c:587 #, fuzzy msgid "No nic selected!" msgstr "Ikke tilkoblet" #: ../../standalone/drakTermServ_.c:590 msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ_.c:604 #, fuzzy msgid "<-- Delete" msgstr "Slett" #: ../../standalone/drakTermServ_.c:611 #, fuzzy msgid "Delete All NBIs" msgstr "Velg fil" #: ../../standalone/drakTermServ_.c:668 msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ_.c:673 #, fuzzy msgid "Add User -->" msgstr "Legg til bruker" #: ../../standalone/drakTermServ_.c:681 msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ_.c:720 #, fuzzy, c-format msgid "type: %s" msgstr "Type: " #: ../../standalone/drakTermServ_.c:753 msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ_.c:773 #, fuzzy msgid "Thin Client" msgstr "DHCP-klient" #: ../../standalone/drakTermServ_.c:775 #, fuzzy msgid "Allow Thin Clients" msgstr "DHCP-klient" #: ../../standalone/drakTermServ_.c:778 msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ_.c:821 #, fuzzy msgid "<-- Edit Client" msgstr "DHCP-klient" #: ../../standalone/drakTermServ_.c:837 #, fuzzy msgid "Delete Client" msgstr "DHCP-klient" #: ../../standalone/drakTermServ_.c:843 #, fuzzy msgid "dhcpd Config..." msgstr "Konfigurerer..." #: ../../standalone/drakTermServ_.c:876 msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ_.c:894 msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ_.c:901 #, fuzzy msgid "Netmask:" msgstr "Nettmaske" #: ../../standalone/drakTermServ_.c:908 msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ_.c:915 msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ_.c:922 msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ_.c:929 #, fuzzy msgid "Domain Name:" msgstr "Domenenavn" #: ../../standalone/drakTermServ_.c:937 #, fuzzy msgid "Name Servers:" msgstr "NIS-tjener" #: ../../standalone/drakTermServ_.c:948 msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ_.c:949 msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ_.c:1001 #, fuzzy msgid "dhcpd Server Configuration" msgstr "LAN-konfigurasjon" #: ../../standalone/drakTermServ_.c:1002 msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ_.c:1005 msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ_.c:1018 #, fuzzy msgid "Write Config" msgstr "Konfigurer på nytt" #: ../../standalone/drakTermServ_.c:1120 #, fuzzy msgid "Please insert floppy disk:" msgstr "Sett inn en oppstartsdiskett i stasjon %s" #: ../../standalone/drakTermServ_.c:1124 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:1126 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:1129 #, fuzzy msgid "No floppy drive available!" msgstr "Ingen diskettstasjon tilgjengelig" #: ../../standalone/drakTermServ_.c:1138 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ_.c:1140 msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ_.c:1159 msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakTermServ_.c:1451 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakautoinst_.c:40 msgid "Error!" msgstr "Feil!" #: ../../standalone/drakautoinst_.c:41 #, c-format msgid "I can't find needed image file `%s'." msgstr "Jeg kan ikke finne filen '%s' som jeg trenger." #: ../../standalone/drakautoinst_.c:43 msgid "Auto Install Configurator" msgstr "Autoinstallasjonskonfigurering" #: ../../standalone/drakautoinst_.c:44 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Du holder på med å konfigurere en automatisk installasjonsdiskett. Denne " "muligheten erlitt farlig, og må brukes forsiktig.\n" "\n" "Med denne muligeten vil du kunne kjøre installasjonen du gjennomførte på " "denne maskinenpå nytt, med muligheten for å selv kunne forandre på noen av " "instillingene.\n" "\n" "For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli " "gjennomført automatisk, uansett hva du valgte under installasjonen.\n" "\n" "Ønsker du å fortsette?" #: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71 msgid "manual" msgstr "" #: ../../standalone/drakautoinst_.c:62 #, fuzzy msgid "replay" msgstr "Gjør igjen" #: ../../standalone/drakautoinst_.c:66 msgid "Automatic Steps Configuration" msgstr "Konfigurasjon av automatiske skritt" #: ../../standalone/drakautoinst_.c:67 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Vennligst velg for hvert steg om det skal være som under installasjonen, " "eller manuelt" #: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79 #, fuzzy msgid "Creating auto install floppy" msgstr "Oppretter diskett for autoinstallasjon" #: ../../standalone/drakautoinst_.c:139 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504 #: ../../standalone/scannerdrake_.c:117 msgid "Congratulations!" msgstr "Gratulerer!" #: ../../standalone/drakautoinst_.c:235 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Disketten har blitt generert.\n" "Du kan nå gjennomføre installasjonen på nytt." #: ../../standalone/drakautoinst_.c:273 msgid "Auto Install" msgstr "Autoinstallering" #: ../../standalone/drakautoinst_.c:343 msgid "Add an item" msgstr "Legg til en enhet" #: ../../standalone/drakautoinst_.c:350 msgid "Remove the last item" msgstr "Fjern siste enhet" #: ../../standalone/drakbackup_.c:580 msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakbackup_.c:690 msgid "WARNING" msgstr "" #: ../../standalone/drakbackup_.c:691 #, fuzzy msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup_.c:692 msgid "INFO" msgstr "" #: ../../standalone/drakbackup_.c:704 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:705 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:709 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803 #: ../../standalone/drakbackup_.c:859 #, fuzzy msgid "Total progess" msgstr "Testsider" #: ../../standalone/drakbackup_.c:785 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup_.c:794 msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup_.c:801 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup_.c:818 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup_.c:819 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Intet passord" #: ../../standalone/drakbackup_.c:820 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup_.c:821 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "Kan ikke åpne %s: %s\n" #: ../../standalone/drakbackup_.c:824 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup_.c:828 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup_.c:873 msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup_.c:877 msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup_.c:898 msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup_.c:902 msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup_.c:906 msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup_.c:945 msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup_.c:1033 msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup_.c:1060 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223 msgid "Backup system files..." msgstr "" #: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291 #, fuzzy msgid "Hard Disk Backup files..." msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1236 #, fuzzy msgid "Backup User files..." msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1237 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:1290 #, fuzzy msgid "Backup Other files..." msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1296 #, fuzzy msgid "No changes to backup!" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1319 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:1322 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1340 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1345 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1354 #, fuzzy msgid " Error during mail sending. \n" msgstr "Feil ved lesing av fil %s" #: ../../standalone/drakbackup_.c:1380 msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501 #: ../../standalone/drakfont_.c:946 #, fuzzy msgid "File Selection" msgstr "Pakkevalg" #: ../../standalone/drakbackup_.c:1529 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:1573 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:1574 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:1575 #, fuzzy msgid "Backup your System files. (/etc directory)" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1576 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1577 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:1578 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:1595 #, fuzzy msgid "Please check all users that you want to include in your backup." msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:1622 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000 #, fuzzy msgid "Remove Selected" msgstr "Fjern inngang" #: ../../standalone/drakbackup_.c:1679 #, fuzzy msgid "Windows (FAT32)" msgstr "Fjern Windows(TM)" #: ../../standalone/drakbackup_.c:1714 #, fuzzy msgid "Users" msgstr "Brukernavn" #: ../../standalone/drakbackup_.c:1740 #, fuzzy msgid "Use network connection to backup" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:1742 msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup_.c:1746 msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1747 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1748 #, fuzzy msgid "" " Transfer \n" "Now" msgstr "Overfør" #: ../../standalone/drakbackup_.c:1749 msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup_.c:1753 #, fuzzy msgid "Please enter the host name or IP." msgstr "Vennligst test musen." #: ../../standalone/drakbackup_.c:1758 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:1763 #, fuzzy msgid "Please enter your login" msgstr "Vennligst prøv igjen" #: ../../standalone/drakbackup_.c:1768 #, fuzzy msgid "Please enter your password" msgstr "Vennligst prøv igjen" #: ../../standalone/drakbackup_.c:1774 #, fuzzy msgid "Remember this password" msgstr "skriv inn passord på nytt" #: ../../standalone/drakbackup_.c:1785 msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup_.c:1879 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1882 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup_.c:1887 #, fuzzy msgid "Please choose your CD/DVD media size (Mb)" msgstr "Vennligst velg tastatur-oppsettet ditt." #: ../../standalone/drakbackup_.c:1893 #, fuzzy msgid "Please check for multisession CD" msgstr "Vennligst klikk på en partisjon" #: ../../standalone/drakbackup_.c:1899 #, fuzzy msgid "Please check if you are using CDRW media" msgstr "Vennligst klikk på en partisjon" #: ../../standalone/drakbackup_.c:1905 #, fuzzy msgid "Please check if you want to erase your RW media (1st Session)" msgstr "Vennligst klikk på en partisjon" #: ../../standalone/drakbackup_.c:1906 #, fuzzy msgid " Erase Now " msgstr "Overfør" #: ../../standalone/drakbackup_.c:1912 #, fuzzy msgid "Please check if you are using a DVDR device" msgstr "Vennligst klikk på en partisjon" #: ../../standalone/drakbackup_.c:1918 #, fuzzy msgid "Please check if you are using a DVDRAM device" msgstr "Vennligst klikk på en partisjon" #: ../../standalone/drakbackup_.c:1931 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:1964 #, fuzzy msgid "No CD device defined!" msgstr "Velg fil" #: ../../standalone/drakbackup_.c:2012 #, fuzzy msgid "Use tape to backup" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:2015 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:2021 #, fuzzy msgid "Please check if you want to use the non-rewinding device." msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2027 #, fuzzy msgid "Please check if you want to erase your tape before the backup." msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2033 #, fuzzy msgid "Please check if you want to eject your tape after the backup." msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112 #: ../../standalone/drakbackup_.c:3068 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:2103 #, fuzzy msgid "Please enter the directory to save to:" msgstr "Vennligst test musen." #: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074 #, fuzzy msgid "Use quota for backup files." msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:2180 #, fuzzy msgid "Network" msgstr "Nettverksgrensesnitt" #: ../../standalone/drakbackup_.c:2185 msgid "CDROM / DVDROM" msgstr "" #: ../../standalone/drakbackup_.c:2190 msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup_.c:2195 #, fuzzy msgid "Tape" msgstr "Type" #: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212 #: ../../standalone/drakbackup_.c:2216 msgid "hourly" msgstr "" #: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213 #: ../../standalone/drakbackup_.c:2216 msgid "daily" msgstr "" #: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214 #: ../../standalone/drakbackup_.c:2216 msgid "weekly" msgstr "" #: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215 #: ../../standalone/drakbackup_.c:2216 msgid "monthly" msgstr "" #: ../../standalone/drakbackup_.c:2229 #, fuzzy msgid "Use daemon" msgstr "Brukernavn" #: ../../standalone/drakbackup_.c:2234 #, fuzzy msgid "" "Please choose the time \n" "interval between each backup" msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2240 #, fuzzy msgid "" "Please choose the\n" "media for backup." msgstr "Vennligst velg språk som skal brukes." #: ../../standalone/drakbackup_.c:2247 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup_.c:2283 msgid "Send mail report after each backup to:" msgstr "" #: ../../standalone/drakbackup_.c:2289 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup_.c:2324 msgid "What" msgstr "" #: ../../standalone/drakbackup_.c:2329 #, fuzzy msgid "Where" msgstr "Hjul" #: ../../standalone/drakbackup_.c:2334 #, fuzzy msgid "When" msgstr "Hjul" #: ../../standalone/drakbackup_.c:2339 #, fuzzy msgid "More Options" msgstr "Modulopsjoner:" #: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444 #, fuzzy msgid "Drakbackup Configuration" msgstr "Nettverkskonfigurasjon" #: ../../standalone/drakbackup_.c:2376 #, fuzzy msgid "Please choose where you want to backup" msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2378 msgid "on Hard Drive" msgstr "" #: ../../standalone/drakbackup_.c:2388 msgid "across Network" msgstr "" #: ../../standalone/drakbackup_.c:2398 msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup_.c:2406 msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup_.c:2449 #, fuzzy msgid "Please choose what you want to backup" msgstr "Vennligst velg pakkene du ønsker å installere." #: ../../standalone/drakbackup_.c:2450 #, fuzzy msgid "Backup system" msgstr "Oppsett filsystemer" #: ../../standalone/drakbackup_.c:2451 msgid "Backup Users" msgstr "" #: ../../standalone/drakbackup_.c:2454 msgid "Select user manually" msgstr "" #: ../../standalone/drakbackup_.c:2537 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:2538 msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2540 msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2542 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2544 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2547 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup_.c:2553 msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup_.c:2554 msgid "RW" msgstr "" #: ../../standalone/drakbackup_.c:2555 #, fuzzy, c-format msgid " on device: %s" msgstr "Enhet mus: %s\n" #: ../../standalone/drakbackup_.c:2556 msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup_.c:2557 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup_.c:2558 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup_.c:2561 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2562 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:2563 #, fuzzy msgid "" "\n" "- Options:\n" msgstr "Valg" #: ../../standalone/drakbackup_.c:2564 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:2567 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:2569 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:2572 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup_.c:2573 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:2574 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:2575 msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup_.c:2576 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:2577 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:2578 msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup_.c:2579 msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup_.c:2581 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:2587 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2754 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2756 #, fuzzy msgid "Please uncheck or remove it on next time." msgstr "Vennligst velg hvilken serieport modemet ditt koblet til." #: ../../standalone/drakbackup_.c:2766 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:2787 msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup_.c:2788 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:2906 #, fuzzy msgid " Restore Configuration " msgstr "Nettverkskonfigurasjon" #: ../../standalone/drakbackup_.c:2924 msgid "OK to restore the other files." msgstr "" #: ../../standalone/drakbackup_.c:2941 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:3019 #, fuzzy msgid "Backup the system files before:" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:3021 #, fuzzy msgid "please choose the date to restore" msgstr "Vennligst velg din musetype." #: ../../standalone/drakbackup_.c:3057 #, fuzzy msgid "Use Hard Disk to backup" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:3060 #, fuzzy msgid "Please enter the directory to save:" msgstr "Vennligst test musen." #: ../../standalone/drakbackup_.c:3103 #, fuzzy msgid "FTP Connection" msgstr "Lokalt nettverksoppkobling" #: ../../standalone/drakbackup_.c:3110 #, fuzzy msgid "Secure Connection" msgstr "Velg skrivertilkobling" #: ../../standalone/drakbackup_.c:3134 msgid "Restore from Hard Disk." msgstr "" #: ../../standalone/drakbackup_.c:3136 msgid "Please enter the directory where backups are stored" msgstr "" #: ../../standalone/drakbackup_.c:3204 #, fuzzy msgid "Select another media to restore from" msgstr "Vennligst velg din musetype." #: ../../standalone/drakbackup_.c:3206 #, fuzzy msgid "Other Media" msgstr "Andre" #: ../../standalone/drakbackup_.c:3211 #, fuzzy msgid "Restore system" msgstr "Installer systemet" #: ../../standalone/drakbackup_.c:3212 msgid "Restore Users" msgstr "" #: ../../standalone/drakbackup_.c:3213 msgid "Restore Other" msgstr "" #: ../../standalone/drakbackup_.c:3215 #, fuzzy msgid "select path to restore (instead of /)" msgstr "Vennligst velg din musetype." #: ../../standalone/drakbackup_.c:3219 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:3221 msgid "Remove user directories before restore." msgstr "" #: ../../standalone/drakbackup_.c:3334 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup_.c:3344 #, fuzzy msgid "" "Restore Selected\n" "Files" msgstr "Fjern inngang" #: ../../standalone/drakbackup_.c:3361 #, fuzzy msgid "" "Change\n" "Restore Path" msgstr "Endre oppløsning" #: ../../standalone/drakbackup_.c:3427 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../standalone/drakbackup_.c:3440 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup_.c:3440 #, fuzzy msgid "Restore From CD" msgstr "Fjern fra RAID" #: ../../standalone/drakbackup_.c:3442 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3452 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup_.c:3452 #, fuzzy msgid "Restore From Tape" msgstr "Redde partisjonstabell" #: ../../standalone/drakbackup_.c:3454 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3474 msgid "Restore Via Network" msgstr "" #: ../../standalone/drakbackup_.c:3474 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup_.c:3475 #, fuzzy msgid "Host Name" msgstr "Vertsnavn" #: ../../standalone/drakbackup_.c:3476 msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup_.c:3483 #, fuzzy msgid "Password required" msgstr "Passord" #: ../../standalone/drakbackup_.c:3489 #, fuzzy msgid "Username required" msgstr "Brukernavn" #: ../../standalone/drakbackup_.c:3492 #, fuzzy msgid "Hostname required" msgstr "Vertsnavn: " #: ../../standalone/drakbackup_.c:3497 msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup_.c:3510 msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup_.c:3513 #, fuzzy msgid "Restore Failed..." msgstr "Redde partisjonstabell" #: ../../standalone/drakbackup_.c:3751 msgid "Restore all backups" msgstr "" #: ../../standalone/drakbackup_.c:3760 #, fuzzy msgid "Custom Restore" msgstr "Skreddersydd" #: ../../standalone/drakbackup_.c:3804 msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup_.c:3810 msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup_.c:3813 #, fuzzy msgid "Restore From Catalog" msgstr "Redde partisjonstabell" #: ../../standalone/drakbackup_.c:3841 #, fuzzy msgid "Restore Progress" msgstr "Redde partisjonstabell" #: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916 #: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056 #: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113 #: ../../standalone/drakbackup_.c:4139 msgid "Previous" msgstr "Forrige" #: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973 #: ../../standalone/logdrake_.c:203 #, fuzzy msgid "Save" msgstr "Status" #: ../../standalone/drakbackup_.c:3946 #, fuzzy msgid "Build Backup" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544 #, fuzzy msgid "Restore" msgstr "Skreddersydd" #: ../../standalone/drakbackup_.c:4189 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:4195 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:4209 #, fuzzy msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "Følgende pakker vil bli installert" #: ../../standalone/drakbackup_.c:4232 #, fuzzy msgid "Please select data to restore..." msgstr "Vennligst velg språk som skal brukes." #: ../../standalone/drakbackup_.c:4267 #, fuzzy msgid "Please select media for backup..." msgstr "Vennligst velg språk som skal brukes." #: ../../standalone/drakbackup_.c:4275 #, fuzzy msgid "Please select data to backup..." msgstr "Vennligst velg språk som skal brukes." #: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:4308 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:4382 #, fuzzy msgid "Backup system files" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:4384 #, fuzzy msgid "Backup user files" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:4386 #, fuzzy msgid "Backup other files" msgstr "Dårlig sikkerhetskopi-fil" #: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421 msgid "Total Progress" msgstr "" #: ../../standalone/drakbackup_.c:4412 msgid "files sending by FTP" msgstr "" #: ../../standalone/drakbackup_.c:4416 #, fuzzy msgid "Sending files..." msgstr "Finner enheter..." #: ../../standalone/drakbackup_.c:4500 #, fuzzy msgid "Backup Now from configuration file" msgstr "Nettverkskonfigurasjon" #: ../../standalone/drakbackup_.c:4505 #, fuzzy msgid "View Backup Configuration." msgstr "Nettverkskonfigurasjon" #: ../../standalone/drakbackup_.c:4526 #, fuzzy msgid "Wizard Configuration" msgstr "LAN-konfigurasjon" #: ../../standalone/drakbackup_.c:4531 #, fuzzy msgid "Advanced Configuration" msgstr "LAN-konfigurasjon" #: ../../standalone/drakbackup_.c:4536 #, fuzzy msgid "Backup Now" msgstr "Oppsett filsystemer" #: ../../standalone/drakbackup_.c:4576 msgid "Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:4624 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4654 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4662 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4701 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4727 msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup_.c:4729 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup_.c:4732 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4769 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4778 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakboot_.c:50 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Installasjon av %s mislykket. Følgende feil oppsto:" #: ../../standalone/drakbug_.c:45 msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/drakbug_.c:50 msgid "First Time Wizard" msgstr "" #: ../../standalone/drakbug_.c:51 msgid "Synchronization tool" msgstr "" #: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66 #: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135 #: ../../standalone/drakbug_.c:139 #, fuzzy msgid "Standalone Tools" msgstr "Konsollverktøy" #: ../../standalone/drakbug_.c:53 msgid "HardDrake" msgstr "" #: ../../standalone/drakbug_.c:54 #, fuzzy msgid "Mandrake Online" msgstr "MandrakeConsulting" #: ../../standalone/drakbug_.c:55 #, fuzzy msgid "Menudrake" msgstr "MandrakeStore" #: ../../standalone/drakbug_.c:56 #, fuzzy msgid "Msec" msgstr "Mus" #: ../../standalone/drakbug_.c:57 #, fuzzy msgid "Remote Control" msgstr "Fjern-skriver" #: ../../standalone/drakbug_.c:58 #, fuzzy msgid "Software Manager" msgstr "Navn deling" #: ../../standalone/drakbug_.c:59 msgid "Urpmi" msgstr "" #: ../../standalone/drakbug_.c:60 msgid "Windows Migration tool" msgstr "" #: ../../standalone/drakbug_.c:61 #, fuzzy msgid "Userdrake" msgstr "Printerdrake" #: ../../standalone/drakbug_.c:62 #, fuzzy msgid "Configuration Wizards" msgstr "Nettverkskonfigurasjonveiviser" #: ../../standalone/drakbug_.c:75 #, fuzzy msgid "Application:" msgstr "Autentifikasjon" #: ../../standalone/drakbug_.c:76 #, fuzzy msgid "Package: " msgstr "Pakkevalg" #: ../../standalone/drakbug_.c:77 msgid "Kernel:" msgstr "" #: ../../standalone/drakbug_.c:78 #, fuzzy msgid "Release: " msgstr "Vennligst vent" #: ../../standalone/drakbug_.c:93 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug_.c:112 #, fuzzy msgid "Report" msgstr "port" #: ../../standalone/drakbug_.c:148 #, fuzzy msgid "Not installed" msgstr "Avslutt installering" #: ../../standalone/drakbug_.c:160 #, fuzzy msgid "Package not installed" msgstr "Avslutt installering" #: ../../standalone/drakbug_.c:173 msgid "connecting to Bugzilla wizard ..." msgstr "" #: ../../standalone/drakbug_.c:180 #, fuzzy msgid "No browser available! Please install one" msgstr "Skjermbilder vil være tilgjengelig etter installasjon i %s" #: ../../standalone/drakconnect_.c:75 #, c-format msgid "Network configuration (%d adapters)" msgstr "Nettverkskonfigurasjon (%d adaptere" #: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591 msgid "Profile: " msgstr "Profil: " #: ../../standalone/drakconnect_.c:91 msgid "Del profile..." msgstr "Slett profil..." #: ../../standalone/drakconnect_.c:97 msgid "Profile to delete:" msgstr "Profil som skal slettes:" #: ../../standalone/drakconnect_.c:125 msgid "New profile..." msgstr "Ny profil...." #: ../../standalone/drakconnect_.c:131 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../standalone/drakconnect_.c:157 msgid "Hostname: " msgstr "Vertsnavn: " #: ../../standalone/drakconnect_.c:164 msgid "Internet access" msgstr "Internett-tilgang" #: ../../standalone/drakconnect_.c:177 msgid "Type:" msgstr "Type:" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Gateway:" msgstr "Gateway:" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Interface:" msgstr "Grensesnitt:" #: ../../standalone/drakconnect_.c:191 msgid "Status:" msgstr "Status:" #: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145 msgid "Wait please" msgstr "" #: ../../standalone/drakconnect_.c:216 msgid "Configure Internet Access..." msgstr "Konfigurer internetttilgang...." #: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445 msgid "LAN configuration" msgstr "LAN-konfigurasjon" #: ../../standalone/drakconnect_.c:228 msgid "Driver" msgstr "Driver" #: ../../standalone/drakconnect_.c:228 msgid "Interface" msgstr "rensesnitt" #: ../../standalone/drakconnect_.c:228 msgid "Protocol" msgstr "Protokoll" #: ../../standalone/drakconnect_.c:228 msgid "State" msgstr "Status" #: ../../standalone/drakconnect_.c:240 msgid "Configure Local Area Network..." msgstr "Konfigurer lokalt nettverk" #: ../../standalone/drakconnect_.c:252 msgid "Click here to launch the wizard ->" msgstr "" #: ../../standalone/drakconnect_.c:253 msgid "Wizard..." msgstr "Wizard..." #: ../../standalone/drakconnect_.c:279 msgid "Apply" msgstr "Bruk" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Connected" msgstr "Tilkoblet" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Not connected" msgstr "Ikke tilkoblet" #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Connect..." msgstr "Koble til..." #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Disconnect..." msgstr "Koble fra..." #: ../../standalone/drakconnect_.c:400 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect_.c:427 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Du har ingen konfigurerte grensesnitt.\n" "Konfigurer disse først ved å klikke på 'Konfigurer'" #: ../../standalone/drakconnect_.c:449 msgid "LAN Configuration" msgstr "LAN-konfigurasjon" #: ../../standalone/drakconnect_.c:460 #, c-format msgid "Adapter %s: %s" msgstr "Adapter %s: %s" #: ../../standalone/drakconnect_.c:466 msgid "Boot Protocol" msgstr "Oppstartsprotokoll" #: ../../standalone/drakconnect_.c:467 msgid "Started on boot" msgstr "Startet ved oppstart" #: ../../standalone/drakconnect_.c:468 msgid "DHCP client" msgstr "DHCP-klient" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "activate now" msgstr "aktiver nå" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "deactivate now" msgstr "deaktiver nå" #: ../../standalone/drakconnect_.c:499 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect_.c:556 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Du har ingen internett-tilkobling.\n" "Opprett en først ved å klikke på 'Konfigurer'" #: ../../standalone/drakconnect_.c:580 msgid "Internet connection configuration" msgstr "Internett tilkobling konfigurasjon" #: ../../standalone/drakconnect_.c:584 msgid "Internet Connection Configuration" msgstr "Internett tilkobling konfigurasjon" #: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94 msgid "Connection type: " msgstr "Oppkoblingstype:" #: ../../standalone/drakconnect_.c:599 msgid "Parameters" msgstr "Parametere" #: ../../standalone/drakconnect_.c:618 msgid "Gateway" msgstr "Gateway" #: ../../standalone/drakconnect_.c:627 msgid "Ethernet Card" msgstr "Ethernettkort" #: ../../standalone/drakconnect_.c:628 msgid "DHCP Client" msgstr "DHCP-klient" #: ../../standalone/drakfloppy_.c:39 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" #: ../../standalone/drakfloppy_.c:40 msgid "Module name" msgstr "Modulnavn" #: ../../standalone/drakfloppy_.c:40 msgid "Size" msgstr "Størrelse" #: ../../standalone/drakfloppy_.c:45 msgid "drakfloppy" msgstr "drakoppstartsdiskett" #: ../../standalone/drakfloppy_.c:63 msgid "boot disk creation" msgstr "Lage oppstartsdiskett(er)" #: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84 msgid "default" msgstr "standard" #: ../../standalone/drakfloppy_.c:87 #, c-format msgid "DrakFloppy Error: %s" msgstr "Feil: DrakFloppy: %s" #: ../../standalone/drakfloppy_.c:98 msgid "kernel version" msgstr "kernel versjon" #: ../../standalone/drakfloppy_.c:104 msgid "General" msgstr "Generelt" #: ../../standalone/drakfloppy_.c:109 msgid "Expert Area" msgstr "Ekspert område" #: ../../standalone/drakfloppy_.c:112 msgid "mkinitrd optional arguments" msgstr "mkinitrd valgfrie argumenter" #: ../../standalone/drakfloppy_.c:113 msgid "Add a module" msgstr "Legg til en modul" #: ../../standalone/drakfloppy_.c:133 msgid "force" msgstr "tving" #: ../../standalone/drakfloppy_.c:134 msgid "if needed" msgstr "hvis det behøves" #: ../../standalone/drakfloppy_.c:135 msgid "omit scsi modules" msgstr "utelat scsi moduler" #: ../../standalone/drakfloppy_.c:136 msgid "omit raid modules" msgstr "utelat raid moduler" #: ../../standalone/drakfloppy_.c:172 msgid "Remove a module" msgstr "Fjern en modul" #: ../../standalone/drakfloppy_.c:194 msgid "Output" msgstr "Utdata" #: ../../standalone/drakfloppy_.c:206 msgid "Build the disk" msgstr "Opprett disken" #: ../../standalone/drakfloppy_.c:336 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Vær sikker på at det er media i %s" #: ../../standalone/drakfloppy_.c:341 #, fuzzy, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Det er ikke noe media i %s\n" "Vennligst sett inn ett." #: ../../standalone/drakfloppy_.c:344 #, c-format msgid "Unable to fork: %s" msgstr "Kan ikke dele %s" #: ../../standalone/drakfloppy_.c:349 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "Kan ikke stenge mkbootdisk skikkelig:\n" "%s \n" "%s" #: ../../standalone/drakfont_.c:213 msgid "Search installed fonts" msgstr "" #: ../../standalone/drakfont_.c:215 msgid "Unselect fonts installed" msgstr "" #: ../../standalone/drakfont_.c:239 msgid "parse all fonts" msgstr "" #: ../../standalone/drakfont_.c:242 #, fuzzy msgid "no fonts found" msgstr "ingen nettverkskort funnet" #: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305 #: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454 #: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493 #: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532 #, fuzzy msgid "done" msgstr "Ferdig" #: ../../standalone/drakfont_.c:257 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:303 msgid "Reselect correct fonts" msgstr "" #: ../../standalone/drakfont_.c:307 msgid "could not find any font.\n" msgstr "" #: ../../standalone/drakfont_.c:331 msgid "Search fonts in installed list" msgstr "" #: ../../standalone/drakfont_.c:359 #, fuzzy msgid "Fonts copy" msgstr "Formater diskett" #: ../../standalone/drakfont_.c:363 #, fuzzy msgid "True Type fonts installation" msgstr "Forbereder installasjon" #: ../../standalone/drakfont_.c:371 msgid "please wait during ttmkfdir..." msgstr "" #: ../../standalone/drakfont_.c:377 msgid "True Type install done" msgstr "" #: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413 msgid "Fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417 #: ../../standalone/drakfont_.c:450 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427 msgid "Ghostscript referencing" msgstr "" #: ../../standalone/drakfont_.c:437 msgid "ttf fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:444 msgid "pfm fonts conversion" msgstr "" #: ../../standalone/drakfont_.c:456 msgid "Suppress temporary Files" msgstr "" #: ../../standalone/drakfont_.c:459 msgid "Restart XFS" msgstr "" #: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526 msgid "Suppress Fonts Files" msgstr "" #: ../../standalone/drakfont_.c:528 #, fuzzy msgid "xfs restart" msgstr "begrense" #: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:621 #, fuzzy msgid "Fonts Importation" msgstr "Formater partisjoner" #: ../../standalone/drakfont_.c:650 msgid "Get Windows Fonts" msgstr "" #: ../../standalone/drakfont_.c:658 msgid "Uninstall Fonts" msgstr "" #: ../../standalone/drakfont_.c:669 #, fuzzy msgid "Advanced Options" msgstr "LAN-konfigurasjon" #: ../../standalone/drakfont_.c:677 #, fuzzy msgid "Font List" msgstr "Monteringspunkt" #: ../../standalone/drakfont_.c:737 msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:793 msgid "" "drakfont Future Overview\n" " - Fonts import:\n" " pfb ( Adobe Type 1 binary )\n" " pfa ( Adobe Type 1 ASCII )\n" " ttf ( True-Type )\n" " pcf.gz\n" " Speedo\n" " and Bitmap (PCF, BDF, and SNF)\n" " - Features\n" " - Install fonts from any directory\n" " - Get windows fonts on any vfat partitions\n" " - Get fonts on any partitions.\n" " - UN-installation of any fonts (even if not installed " "through drakfont)\n" " - Support\n" " - Xfs\n" " - ghostscript & printer\n" " - Staroffice & printer\n" " - abiword\n" "\t - netscape\n" " - Koffice, Gnumeric, ... studying\n" " - all fonts supported by printer\n" " - anti-aliases by RENDER in Xfree86 .... \n" "\t\t\t\tsupported by KDE.\n" "\t\t\t\twill be supported by gnome 1.2.\n" "Visual Interface:\n" " Window interface:\n" " - Fontselectiondialog widget\n" " - Command buttons under Fontselectiondialog (like the actual " "frontend).\n" " Commands buttons:\n" " - import from windows partition.\n" " import from all fat32 partitions and look for winnt/windows/" "font\n" " and import all (delete doublon) but don't import if already " "exist.\n" " - import from directory\n" " look for if it exist before for each font and not delete the " "original.\n" " (replace all, no, none)\n" " expert options:\n" " ask the directory, and look for if it exist before\n" " if it exist ask: (replace all, no, none)\n" " - uninstall with list per font type\n" " Expert additional switch\n" " - option support: ghostscript, Staroffice, etc...\n" " check-button. (by default all check)\n" " - Printer Application Fonts Support...\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:862 #, fuzzy msgid "Choose the applications that will support the fonts:" msgstr "Velg partisjonene du ønsker å partisjonere" #: ../../standalone/drakfont_.c:870 msgid "Ghostscript" msgstr "" #: ../../standalone/drakfont_.c:877 #, fuzzy msgid "StarOffice" msgstr "Office" #: ../../standalone/drakfont_.c:884 #, fuzzy msgid "Abiword" msgstr "Avbryt" #: ../../standalone/drakfont_.c:891 #, fuzzy msgid "Generic Printers" msgstr "Skriver" #: ../../standalone/drakfont_.c:958 msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../standalone/drakfont_.c:1005 #, fuzzy msgid "Install List" msgstr "Installer systemet" #: ../../standalone/drakfont_.c:1048 msgid "click here if you are sure." msgstr "" #: ../../standalone/drakfont_.c:1055 msgid "here if no." msgstr "" #: ../../standalone/drakfont_.c:1112 msgid "Unselected All" msgstr "" #: ../../standalone/drakfont_.c:1116 #, fuzzy msgid "Selected All" msgstr "Velg fil" #: ../../standalone/drakfont_.c:1120 #, fuzzy msgid "Remove List" msgstr "Fjern skriver" #: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175 #, fuzzy msgid "Initials tests" msgstr "Initmelding" #: ../../standalone/drakfont_.c:1145 #, fuzzy msgid "Copy fonts on your system" msgstr "Ikke noe nettverksadapter i systemet ditt!" #: ../../standalone/drakfont_.c:1149 msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakfont_.c:1153 #, fuzzy msgid "Post Install" msgstr "Installer" #: ../../standalone/drakfont_.c:1178 #, fuzzy msgid "Remove fonts on your system" msgstr "Ikke noe nettverksadapter i systemet ditt!" #: ../../standalone/drakfont_.c:1182 #, fuzzy msgid "Post Uninstall" msgstr "Avslutt installering" #: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182 msgid "Internet Connection Sharing" msgstr "Deling av Internett tilkobling" #: ../../standalone/drakgw_.c:114 msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../standalone/drakgw_.c:125 msgid "Internet Connection Sharing currently enabled" msgstr "Deling av Internett tilkobling er slått på" #: ../../standalone/drakgw_.c:126 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n" "Dette er for øyeblikket slått på.\n" "\n" "Hva vil du gjøre?" #: ../../standalone/drakgw_.c:130 msgid "disable" msgstr "slå av" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "dismiss" msgstr "avvis" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "reconfigure" msgstr "Konfigurer på nytt" #: ../../standalone/drakgw_.c:133 msgid "Disabling servers..." msgstr "Slår av tjenere..." #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "Deling av Internett tilkobling er slått av" #: ../../standalone/drakgw_.c:149 msgid "Internet Connection Sharing currently disabled" msgstr "Deling av Internett tilkobling er slått av" #: ../../standalone/drakgw_.c:150 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n" "Dette er for øyeblikket slått av.\n" "\n" "Hva vil du gjøre?" #: ../../standalone/drakgw_.c:154 msgid "enable" msgstr "slå på" #: ../../standalone/drakgw_.c:161 msgid "Enabling servers..." msgstr "Slår på tjenere..." #: ../../standalone/drakgw_.c:166 msgid "Internet connection sharing is now enabled." msgstr "Deling av Internett tilkobling er nå slått på." #: ../../standalone/drakgw_.c:183 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Du er i ferd med å konfigurere maskinen din til å dele Internett-" "tilkobling.\n" "Andre maskiner i nettverket ditt vil da kunne bruke denne maskinens " "Internett tilkobling.\n" "\n" "Merk: du trenger et dedikert nettverksadapter for å sette opp et lokalt " "nettverk (LAN)." #: ../../standalone/drakgw_.c:211 #, c-format msgid "Interface %s (using module %s)" msgstr "Grensesnitt %s (bruker modul %s)" #: ../../standalone/drakgw_.c:212 #, c-format msgid "Interface %s" msgstr "Grensesnitt %s" #: ../../standalone/drakgw_.c:220 msgid "No network adapter on your system!" msgstr "Ikke noe nettverksadapter i systemet ditt!" #: ../../standalone/drakgw_.c:221 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. " "Vennligst kjør verktøyet for maskinvarekonfigurasjon." #: ../../standalone/drakgw_.c:227 msgid "Network interface" msgstr "Nettverksgrensesnitt" #: ../../standalone/drakgw_.c:228 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Det er bare ett konfigurert nettverksadapter i systemet ditt:\n" "\n" "%s\n" "\n" "Jeg er i ferd med å sette opp ditt lokale nettverk (LAN) med dette adapteret." #: ../../standalone/drakgw_.c:235 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale " "nettverk (LAN)." #: ../../standalone/drakgw_.c:261 #, fuzzy msgid "Network interface already configured" msgstr "Monitor er ikke konfigurert" #: ../../standalone/drakgw_.c:262 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw_.c:267 #, fuzzy msgid "Automatic reconfiguration" msgstr "Konfigurasjon av automatiske skritt" #: ../../standalone/drakgw_.c:267 msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw_.c:268 #, fuzzy msgid "Show current interface configuration" msgstr "Modifiser skriverkonfigurasjon" #: ../../standalone/drakgw_.c:269 #, fuzzy msgid "Current interface configuration" msgstr "Modifiser skriverkonfigurasjon" #: ../../standalone/drakgw_.c:270 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw_.c:283 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:290 #, fuzzy msgid "Local Network adress" msgstr "ingen nettverkskort funnet" #: ../../standalone/drakgw_.c:294 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:300 #, fuzzy msgid "(This) DHCP Server IP" msgstr "CUPS tjener IP" #: ../../standalone/drakgw_.c:301 #, fuzzy msgid "The DNS Server IP" msgstr "CUPS tjener IP" #: ../../standalone/drakgw_.c:302 #, fuzzy msgid "The internal domain name" msgstr "Nytt skrivernavn" #: ../../standalone/drakgw_.c:303 msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw_.c:304 msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw_.c:305 msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:306 msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:307 msgid "Re-configure interface and DHCP server" msgstr "" #: ../../standalone/drakgw_.c:314 msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw_.c:325 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n" #: ../../standalone/drakgw_.c:335 msgid "Configuring..." msgstr "Konfigurerer..." #: ../../standalone/drakgw_.c:336 msgid "Configuring scripts, installing software, starting servers..." msgstr "Konfigurerer script, installerer programvare, starter tjenere..." #: ../../standalone/drakgw_.c:372 #, c-format msgid "Problems installing package %s" msgstr "Problemer ved installering av pakke %s" #: ../../standalone/drakgw_.c:505 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Alt har blitt konfigurert.\n" "Du kan nå dele Internett-tilkobling med andre maskiner på ditt lokale " "nettverk ved å bruke automatisk nettverkskonfigurasjon (DHCP)." #: ../../standalone/drakgw_.c:523 msgid "The setup has already been done, but it's currently disabled." msgstr "Oppsett har allerede blitt gjort, men er for øyeblikket slått av." #: ../../standalone/drakgw_.c:524 msgid "The setup has already been done, and it's currently enabled." msgstr "Oppsett har allerede blitt gjort, og er for øyeblikket slått på." #: ../../standalone/drakgw_.c:525 msgid "No Internet Connection Sharing has ever been configured." msgstr "Deling av Internett tilkobling har aldri blitt konfigurert." #: ../../standalone/drakgw_.c:531 msgid "Internet connection sharing configuration" msgstr "Internett deling av tilkobling konfigurasjon" #: ../../standalone/drakgw_.c:539 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Velkommen til verktøyet for deling av Internett tilkobling!\n" "\n" "%s\n" "\n" "Klikk på Konfigurer for å starte oppsett-hjelperen." #: ../../standalone/drakperm_.c:36 #, fuzzy msgid "group" msgstr "Arbeidsgruppe" #: ../../standalone/drakperm_.c:36 msgid "path" msgstr "" #: ../../standalone/drakperm_.c:36 #, fuzzy msgid "permissions" msgstr "partisjon %s" #: ../../standalone/drakperm_.c:36 #, fuzzy msgid "user" msgstr "Brukernavn" #: ../../standalone/drakperm_.c:43 msgid "Up" msgstr "" #: ../../standalone/drakperm_.c:44 #, fuzzy msgid "delete" msgstr "Slett" #: ../../standalone/drakperm_.c:45 msgid "edit" msgstr "" #: ../../standalone/drakperm_.c:46 #, fuzzy msgid "Down" msgstr "Ferdig" #: ../../standalone/drakperm_.c:47 #, fuzzy msgid "add a rule" msgstr "Legg til en modul" #: ../../standalone/drakperm_.c:48 msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm_.c:51 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm_.c:56 #, fuzzy msgid "Add a new rule at the end" msgstr "Legg til en ny skriver" #: ../../standalone/drakperm_.c:57 msgid "Edit curent rule" msgstr "" #: ../../standalone/drakperm_.c:58 msgid "Up selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:59 msgid "Down selected rule one level" msgstr "" #: ../../standalone/drakperm_.c:60 #, fuzzy msgid "Delete selected rule" msgstr "Fjern inngang" #: ../../standalone/drakperm_.c:224 msgid "browse" msgstr "" #: ../../standalone/drakperm_.c:231 #, fuzzy msgid "Current user" msgstr "Godta bruker" #: ../../standalone/drakperm_.c:236 #, fuzzy msgid "Permissions" msgstr "Versjon: %s\n" #: ../../standalone/drakperm_.c:237 msgid "Path" msgstr "" #: ../../standalone/drakperm_.c:238 #, fuzzy msgid "Property" msgstr "Port" #: ../../standalone/drakperm_.c:240 msgid "sticky-bit" msgstr "" #: ../../standalone/drakperm_.c:241 msgid "Set-UID" msgstr "" #: ../../standalone/drakperm_.c:242 msgid "Set-GID" msgstr "" #: ../../standalone/drakperm_.c:296 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm_.c:297 #, fuzzy msgid "Use owner id for execution" msgstr "Bruk automatisk detektering" #: ../../standalone/drakperm_.c:298 #, fuzzy msgid "Use group id for execution" msgstr "Bruk automatisk detektering" #: ../../standalone/drakperm_.c:299 msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm_.c:304 #, fuzzy msgid "Path selection" msgstr "Lagre pakkevalg" #: ../../standalone/drakperm_.c:350 #, fuzzy msgid "user :" msgstr "Brukernavn" #: ../../standalone/drakperm_.c:352 #, fuzzy msgid "group :" msgstr "Arbeidsgruppe" #: ../../standalone/draksound_.c:46 #, fuzzy msgid "No Sound Card detected!" msgstr "Ikke tilkoblet" #: ../../standalone/draksound_.c:47 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound_.c:54 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksplash_.c:21 msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/draksplash_.c:67 #, fuzzy msgid "first step creation" msgstr "Lage oppstartsdiskett(er)" #: ../../standalone/draksplash_.c:70 #, fuzzy msgid "final resolution" msgstr "Oppløsning" #: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163 #, fuzzy msgid "choose image file" msgstr "Velg en fil" #: ../../standalone/draksplash_.c:72 #, fuzzy msgid "Theme name" msgstr "Navn deling" #: ../../standalone/draksplash_.c:77 msgid "Browse" msgstr "" #: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153 #, fuzzy msgid "Configure bootsplash picture" msgstr "Konfigurer tjenester" #: ../../standalone/draksplash_.c:90 msgid "" "x coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:91 msgid "" "y coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:92 msgid "text width" msgstr "" #: ../../standalone/draksplash_.c:93 msgid "text box height" msgstr "" #: ../../standalone/draksplash_.c:94 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:95 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:96 msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:97 msgid "the heigth of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:98 msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:113 #, fuzzy msgid "Preview" msgstr "enhet" #: ../../standalone/draksplash_.c:115 #, fuzzy msgid "Save theme" msgstr "Installer systemet" #: ../../standalone/draksplash_.c:116 #, fuzzy msgid "Choose color" msgstr "Velg en monitor" #: ../../standalone/draksplash_.c:119 msgid "Display logo on Console" msgstr "" #: ../../standalone/draksplash_.c:120 msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "" #: ../../standalone/draksplash_.c:205 msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash_.c:428 #, fuzzy msgid "ProgressBar color selection" msgstr "Skrivervalg" #: ../../standalone/draksplash_.c:449 #, fuzzy msgid "You must choose an image file first!" msgstr "Du må velge/entre en skriver/enhet!" #: ../../standalone/draksplash_.c:458 #, fuzzy msgid "Generating preview ..." msgstr "Finner enheter ..." #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:506 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakxtv_.c:46 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:63 #, fuzzy msgid "Canada (cable)" msgstr "Canadisk (Quebec)" #: ../../standalone/drakxtv_.c:63 msgid "USA (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable)" msgstr "" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable-hrc)" msgstr "" #: ../../standalone/drakxtv_.c:64 msgid "China (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:64 msgid "Japan (broadcast)" msgstr "" #: ../../standalone/drakxtv_.c:64 msgid "Japan (cable)" msgstr "" #: ../../standalone/drakxtv_.c:65 msgid "East Europe" msgstr "" #: ../../standalone/drakxtv_.c:65 #, fuzzy msgid "France [SECAM]" msgstr "Frankrike" #: ../../standalone/drakxtv_.c:65 #, fuzzy msgid "Ireland" msgstr "Islansk" #: ../../standalone/drakxtv_.c:65 msgid "West Europe" msgstr "" #: ../../standalone/drakxtv_.c:66 #, fuzzy msgid "Australia" msgstr "Østerrike" #: ../../standalone/drakxtv_.c:66 #, fuzzy msgid "Newzealand" msgstr "Netherlands" #: ../../standalone/drakxtv_.c:67 msgid "South Africa" msgstr "" #: ../../standalone/drakxtv_.c:68 msgid "Argentina" msgstr "" #: ../../standalone/drakxtv_.c:69 msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv_.c:102 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../standalone/drakxtv_.c:104 msgid "TV norm:" msgstr "" #: ../../standalone/drakxtv_.c:105 msgid "Area:" msgstr "" #: ../../standalone/drakxtv_.c:109 msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakxtv_.c:116 msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakxtv_.c:120 #, fuzzy msgid "There was an error while scanning for TV channels" msgstr "Det var en feil ved installering av pakkene:" #: ../../standalone/drakxtv_.c:121 msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakxtv_.c:124 msgid "Have a nice day!" msgstr "" #: ../../standalone/drakxtv_.c:125 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../standalone/drakxtv_.c:147 msgid "No TV Card detected!" msgstr "" #: ../../standalone/drakxtv_.c:148 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/harddrake2_.c:17 msgid "Alternative drivers" msgstr "Alternative drivere" #: ../../standalone/harddrake2_.c:18 msgid "the list of alternative drivers for this sound card" msgstr "listen over alternative drivere for dette lydkortet" #: ../../standalone/harddrake2_.c:20 msgid "Bus" msgstr "Buss" #: ../../standalone/harddrake2_.c:21 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "dette er den fysiske bussen som enheten er plugget til (f.eks. PCI, USB, ...)" #: ../../standalone/harddrake2_.c:22 msgid "Channel" msgstr "Kanal" #: ../../standalone/harddrake2_.c:22 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI kanal" #: ../../standalone/harddrake2_.c:23 msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2_.c:23 msgid "" "The GNU/Linux kernel needs to do run a calculation loop at boot time\n" "\t to initialize a timer counter. Its result is stored as bogomips as a way " "to \"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2_.c:26 msgid "Bus identification" msgstr "Buss identifikasjon" #: ../../standalone/harddrake2_.c:27 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "" "- PCI og USB enheter: dette oppgir leverandør, enhet, underleverandør og " "underenhet PCI/USB ids" #: ../../standalone/harddrake2_.c:29 msgid "Location on the bus" msgstr "Lokasjon på bussen" #: ../../standalone/harddrake2_.c:30 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- pci enheter: dette gir PCI spor, enhet og funksjon til dette kortet\n" "- eide enheter: enheten er enten en slave eller en master enhet\n" "- scsi enheter: scsi buss og scsi enhet ids" #: ../../standalone/harddrake2_.c:33 #, fuzzy msgid "Cache size" msgstr "skivestørrelse" #: ../../standalone/harddrake2_.c:33 msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Coma bug:" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Does this cpu has Cyrix 6x86 Coma bug ?" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2_.c:36 #, fuzzy msgid "Cpuid level" msgstr "Sikkerhetsnivå" #: ../../standalone/harddrake2_.c:36 msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "" "The cpu frequency in Mhz (Mega herz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2_.c:38 #, fuzzy msgid "This field describes the device" msgstr "dette feltet beskriver enheten" #: ../../standalone/harddrake2_.c:39 msgid "Old device file" msgstr "Gammel enhetfil" #: ../../standalone/harddrake2_.c:40 msgid "old static device name used in dev package" msgstr "gammelt statisk enhetsnavn brukt i dev pakke" #: ../../standalone/harddrake2_.c:41 msgid "New devfs device" msgstr "Ny devfs enhet" #: ../../standalone/harddrake2_.c:42 msgid "new dinamic device name generated by incore kernel devfs" msgstr "nytt dynamisk enhetsnavn generert av incore kjerne devfs" #: ../../standalone/harddrake2_.c:43 msgid "Module" msgstr "Modul" #: ../../standalone/harddrake2_.c:43 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "modulen til GNU/Linux kjernen som håndterer den enheten" #: ../../standalone/harddrake2_.c:44 msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2_.c:44 msgid "Flags" msgstr "" #: ../../standalone/harddrake2_.c:45 msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2_.c:46 msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the attended precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "Does FPU have an irq vector" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "Early pentium were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2_.c:52 msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2_.c:53 msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2_.c:55 #, fuzzy msgid "Floppy format" msgstr "Formater" #: ../../standalone/harddrake2_.c:55 msgid "Format of floppies the drive accept" msgstr "" #: ../../standalone/harddrake2_.c:56 #, fuzzy msgid "Level" msgstr "nivå" #: ../../standalone/harddrake2_.c:56 msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2_.c:57 msgid "Media class" msgstr "Mediaklasse" #: ../../standalone/harddrake2_.c:57 msgid "class of hardware device" msgstr "klasse av maskinvareenhet" #: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59 msgid "Model" msgstr "Modell" #: ../../standalone/harddrake2_.c:58 msgid "hard disk model" msgstr "harddisk modell" #: ../../standalone/harddrake2_.c:59 msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Model name" msgstr "Modulnavn" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Official vendor name of the cpu" msgstr "leverandørnavnet til enheten" #: ../../standalone/harddrake2_.c:61 msgid "Number of buttons" msgstr "Antall knapper" #: ../../standalone/harddrake2_.c:62 #, fuzzy msgid "Name" msgstr "Navn: " #: ../../standalone/harddrake2_.c:63 #, fuzzy msgid "network printer port" msgstr ", TCP/IP vert \"%s\", port %s" #: ../../standalone/harddrake2_.c:64 msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2_.c:64 #, fuzzy msgid "the number of the processor" msgstr "leverandørnavnet til enheten" #: ../../standalone/harddrake2_.c:65 #, fuzzy msgid "Model stepping" msgstr "Formatering" #: ../../standalone/harddrake2_.c:65 msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2_.c:66 #, fuzzy msgid "The type of bus on which the mouse is connected" msgstr "Vennligst velg hvilken serieport musen din koblet til." #: ../../standalone/harddrake2_.c:67 msgid "the vendor name of the device" msgstr "leverandørnavnet til enheten" #: ../../standalone/harddrake2_.c:68 #, fuzzy msgid "the vendor name of the processor" msgstr "leverandørnavnet til enheten" #: ../../standalone/harddrake2_.c:82 msgid "/_Quit" msgstr "/_Avslutt" #: ../../standalone/harddrake2_.c:83 #, fuzzy msgid "/Autodetect _printers" msgstr "Utfør automatisk detektering" #: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85 #: ../../standalone/logdrake_.c:81 msgid "/_Options" msgstr "/_Valg" #: ../../standalone/harddrake2_.c:85 #, fuzzy msgid "/Autodetect _modems" msgstr "Utfør automatisk detektering" #: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89 #: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102 #: ../../standalone/logdrake_.c:83 msgid "/_Help" msgstr "/_Hjelp" #: ../../standalone/harddrake2_.c:89 msgid "/_Help..." msgstr "/_Hjelp..." #: ../../standalone/harddrake2_.c:92 msgid "Harddrake help" msgstr "Harddrake hjelp" #: ../../standalone/harddrake2_.c:93 msgid "" "Description of the fields:\n" "\n" msgstr "" "Beskrivelse av feltene:\n" "\n" #: ../../standalone/harddrake2_.c:96 msgid "" "Once you've selected a device, you'll be able to see explanations on fields " "displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2_.c:96 #, fuzzy msgid "Select a device !" msgstr "Velg et grafikk-kort" #: ../../standalone/harddrake2_.c:100 msgid "/_Report Bug" msgstr "/_Rapporter feil" #: ../../standalone/harddrake2_.c:102 msgid "/_About..." msgstr "/_Om..." #: ../../standalone/harddrake2_.c:104 msgid "About Harddrake" msgstr "Om Harddrake" #: ../../standalone/harddrake2_.c:105 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" "Dette er HardDrake, et Mandrake maskinvare konfigureringsverktøy.\n" "Versjon:" #: ../../standalone/harddrake2_.c:106 msgid "Author:" msgstr "Utgiver:" #: ../../standalone/harddrake2_.c:113 msgid "Detection in progress" msgstr "oppdagelse pågår" #: ../../standalone/harddrake2_.c:119 msgid "Harddrake2 version " msgstr "Harddrake2 versjon " #: ../../standalone/harddrake2_.c:126 msgid "Detected hardware" msgstr "Oppdaget maskinvare" #: ../../standalone/harddrake2_.c:129 msgid "Information" msgstr "Informasjon" #: ../../standalone/harddrake2_.c:131 msgid "Configure module" msgstr "Konfigurer modul" #: ../../standalone/harddrake2_.c:137 msgid "Run config tool" msgstr "Kjør konfig verktøy" #: ../../standalone/harddrake2_.c:143 #, c-format msgid "Running \"%s\" ..." msgstr "Kjører \"%s\" ..." #: ../../standalone/harddrake2_.c:159 msgid "" "Click on a device in the left tree in order to get its information displayed " "here." msgstr "" #: ../../standalone/harddrake2_.c:231 msgid "primary" msgstr "primær" #: ../../standalone/harddrake2_.c:231 msgid "secondary" msgstr "sekundær" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect modems" msgstr "Utfør automatisk detektering" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect printers" msgstr "Utfør automatisk detektering" #: ../../standalone/harddrake2_.c:261 #, fuzzy msgid "/Options" msgstr "/_Valg" #: ../../standalone/keyboarddrake_.c:26 msgid "Please, choose your keyboard layout." msgstr "Vennligst velg tastatur-oppsettet ditt." #: ../../standalone/keyboarddrake_.c:35 msgid "Do you want the BackSpace to return Delete in console?" msgstr "Ønsker du at BackSpace skal returnere Delete i konsoll?" #: ../../standalone/livedrake_.c:18 msgid "Change Cd-Rom" msgstr "Bytt CD" #: ../../standalone/livedrake_.c:19 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok når du er\n" "ferdig. Hvis du ikke har denne, trykk Avbryt for å unngå oppgradering." #: ../../standalone/livedrake_.c:29 msgid "Unable to start live upgrade !!!\n" msgstr "Kan ikke starte oppgradering !!!\n" #: ../../standalone/localedrake_.c:34 msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350 msgid "logdrake" msgstr "logdrake" #: ../../standalone/logdrake_.c:68 #, fuzzy msgid "Show only for the selected day" msgstr "Vis kun for denne dag" #: ../../standalone/logdrake_.c:75 msgid "/File/_New" msgstr "/Fil/_Ny" #: ../../standalone/logdrake_.c:75 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:76 msgid "/File/_Open" msgstr "/Fil/_Åpne" #: ../../standalone/logdrake_.c:76 msgid "O" msgstr "Å" #: ../../standalone/logdrake_.c:77 msgid "/File/_Save" msgstr "/Fil/_Lagre" #: ../../standalone/logdrake_.c:77 msgid "S" msgstr "L" #: ../../standalone/logdrake_.c:78 msgid "/File/Save _As" msgstr "/Fil/Lagre _Som" #: ../../standalone/logdrake_.c:79 msgid "/File/-" msgstr "/Fil/-" #: ../../standalone/logdrake_.c:82 msgid "/Options/Test" msgstr "/Valg/Test" #: ../../standalone/logdrake_.c:84 msgid "/Help/_About..." msgstr "/Hjelp/_Om..." #: ../../standalone/logdrake_.c:145 #, fuzzy msgid "User" msgstr "Brukernavn" #: ../../standalone/logdrake_.c:146 #, fuzzy msgid "Messages" msgstr "meldinger" #: ../../standalone/logdrake_.c:147 #, fuzzy msgid "Syslog" msgstr "syslog" #: ../../standalone/logdrake_.c:148 msgid "Mandrake Tools Explanations" msgstr "" #: ../../standalone/logdrake_.c:151 msgid "search" msgstr "søk" #: ../../standalone/logdrake_.c:161 msgid "A tool to monitor your logs" msgstr "Ett verktøy for å sjekke loggene dine" #: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91 msgid "Settings" msgstr "Instillinger" #: ../../standalone/logdrake_.c:167 msgid "matching" msgstr "lik" #: ../../standalone/logdrake_.c:168 msgid "but not matching" msgstr "men ikke lik" #: ../../standalone/logdrake_.c:172 msgid "Choose file" msgstr "Velg fil" #: ../../standalone/logdrake_.c:181 msgid "Calendar" msgstr "Kalender" #: ../../standalone/logdrake_.c:191 msgid "Content of the file" msgstr "Innholdet i filen" #: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375 msgid "Mail alert" msgstr "" #: ../../standalone/logdrake_.c:245 #, c-format msgid "please wait, parsing file: %s" msgstr "vennligst vent, gjennomgår %s" #: ../../standalone/logdrake_.c:392 #, fuzzy msgid "Mail alert configuration" msgstr "Lilo/Grub konfigurasjon" #: ../../standalone/logdrake_.c:393 #, fuzzy msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Velkommen til proxy-konfigurasjonsverktøyet.\n" "\n" "Her kan du sette opp dine http og ftp proxier\n" "med eller uten brukernavn og passord\n" #: ../../standalone/logdrake_.c:400 msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/logdrake_.c:401 #, fuzzy msgid "Domain Name Resolver" msgstr "Domenenavn" #: ../../standalone/logdrake_.c:402 #, fuzzy msgid "Ftp Server" msgstr "NIS-tjener" #: ../../standalone/logdrake_.c:403 #, fuzzy msgid "Postfix Mail Server" msgstr "Postfix posttjener, Inn nyhetstjener" #: ../../standalone/logdrake_.c:404 #, fuzzy msgid "Samba Server" msgstr "NIS-tjener" #: ../../standalone/logdrake_.c:405 #, fuzzy msgid "SSH Server" msgstr "NIS-tjener" #: ../../standalone/logdrake_.c:406 #, fuzzy msgid "Webmin Service" msgstr "Tjenester" #: ../../standalone/logdrake_.c:407 #, fuzzy msgid "Xinetd Service" msgstr "Skrivertjener" #: ../../standalone/logdrake_.c:414 #, fuzzy msgid "service setting" msgstr "Tjener" #: ../../standalone/logdrake_.c:415 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "" #: ../../standalone/logdrake_.c:428 #, fuzzy msgid "load setting" msgstr "Formatering" #: ../../standalone/logdrake_.c:429 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:444 #, fuzzy msgid "alert configuration" msgstr "Internett-konfigurasjon" #: ../../standalone/logdrake_.c:445 #, fuzzy msgid "Please enter your email address below " msgstr "Vennligst prøv igjen" #: ../../standalone/logdrake_.c:486 msgid "Save as.." msgstr "Lagre Som..." #: ../../standalone/mousedrake_.c:37 msgid "Please, choose the type of your mouse." msgstr "Vennligst velg din musetype." #: ../../standalone/mousedrake_.c:50 msgid "Emulate third button?" msgstr "Emulere tredje knapp?" #: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87 #, fuzzy msgid "Network Monitoring" msgstr "Nettverkskonfigurasjon" #: ../../standalone/net_monitor_.c:96 #, fuzzy msgid "Profile " msgstr "Profil: " #: ../../standalone/net_monitor_.c:99 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:103 #, fuzzy msgid "Sending Speed:" msgstr "Finner enheter..." #: ../../standalone/net_monitor_.c:104 msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor_.c:106 #, fuzzy msgid "Connection Time: " msgstr "Oppkoblingstype:" #: ../../standalone/net_monitor_.c:113 msgid "Logs" msgstr "" #: ../../standalone/net_monitor_.c:147 #, fuzzy msgid "Wait please, testing your connection..." msgstr "Tester tilkoblingen din..." #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Connecting to Internet " msgstr "Koble opp mot Internett" #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Disconnecting from Internet " msgstr "Koble opp mot Internett" #: ../../standalone/net_monitor_.c:222 msgid "Disconnection from Internet failed." msgstr "" #: ../../standalone/net_monitor_.c:223 msgid "Disconnection from Internet complete." msgstr "" #: ../../standalone/net_monitor_.c:225 #, fuzzy msgid "Connection complete." msgstr "Oppkoblingshastighet" #: ../../standalone/net_monitor_.c:226 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:330 #, fuzzy msgid "Color configuration" msgstr "Internett-konfigurasjon" #: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:397 msgid "average" msgstr "" #: ../../standalone/net_monitor_.c:400 #, fuzzy msgid "Local measure" msgstr "Lokale filer" #: ../../standalone/net_monitor_.c:432 msgid "transmitted" msgstr "" #: ../../standalone/net_monitor_.c:433 msgid "received" msgstr "" #: ../../standalone/net_monitor_.c:453 msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Connect %s" msgstr "Koble til" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Disconnect %s" msgstr "Koble fra" #: ../../standalone/printerdrake_.c:47 #, fuzzy msgid "Reading printer data ..." msgstr "Leser skriverdata: ..." #: ../../standalone/scannerdrake_.c:39 msgid "Detecting devices ..." msgstr "Finner enheter ..." #: ../../standalone/scannerdrake_.c:39 msgid "Test ports" msgstr "Test porter" #: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66 #: ../../standalone/scannerdrake_.c:79 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake_.c:54 #, fuzzy, c-format msgid "%s found on %s, configure it?" msgstr "Ønsker du å konfigurere en skriver?" #: ../../standalone/scannerdrake_.c:57 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake_.c:63 #, fuzzy msgid "Select a scanner" msgstr "Velg et grafikk-kort" #: ../../standalone/scannerdrake_.c:91 #, c-format msgid "This %s scanner is unsupported" msgstr "" #: ../../standalone/scannerdrake_.c:105 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" #: ../../standalone/scannerdrake_.c:107 #, fuzzy msgid "choose device" msgstr "Oppstartsenhet" #: ../../standalone/scannerdrake_.c:113 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake_.c:118 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../standalone/service_harddrake_.c:48 msgid "Some devices were added:\n" msgstr "" #: ../../standalone/service_harddrake_.c:64 #, fuzzy msgid "Hardware probing in progress" msgstr "oppdagelse pågår" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "Velg språk" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "Velg installasjonsklasse" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "Oppdaging av harddisk" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "Konfigurer mus" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "Velg tastatur" #: ../../steps.pm_.c:19 msgid "Security" msgstr "Sikkerhet" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "Oppsett filsystemer" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Formater partisjoner" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "Velg pakker for installering" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "Installer systemet" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "Legg til en bruker" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "Konfigurer nettverk" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "Konfigurer tjenester" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "Installer oppstartslaster" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "Opprett en oppstartdiskett" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "Konfigurer X" #: ../../steps.pm_.c:34 #, fuzzy msgid "Install system updates" msgstr "Installer systemet" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "Avslutt installering" #: ../../ugtk.pm_.c:636 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../ugtk2.pm_.c:711 msgid "utopia 25" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Web/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Nettverksmaskin (klient)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener" #: ../../share/compssUsers:999 msgid "Office" msgstr "Office" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome arbeidstasjon" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Verktøy for din Palm Pilot eller din Visor" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Arbeidstasjon" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Server, Brannmur/ruter" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Tjener for domenenavn og nettverksinformasjon" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Kontorprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, " "gnumeric), pdf fremvisere etc" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "Lydrelaterte verktøy: mp3 eller midi-spillere, miksere etc." #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Bøker og howto's om Linux og fri programvare" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE arbeidstasjon" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Multimedia - Video" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "Sett med verktøy for e-post, nyheter, web, filoverføring og chat" #: ../../share/compssUsers:999 msgid "Database" msgstr "Database" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL eller MySQL database tjener" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Verktøy for å forenkle konfigurasjonen på maskinen din" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Multimedia - Lyd" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Dokumentasjon" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Konsollverktøy" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Postfix posttjener, Inn nyhetstjener" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Internettstasjon" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimediastasjon" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Konfigurasjon" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "Mere grafiske skrivebord (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "K Desktop Environment, basis grafikkmiljø med en samling av passende verktøy" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Grafisk miljø" #: ../../share/compssUsers:999 msgid "Development" msgstr "Utvikling" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache og Pro-ftpd" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "Verktøy for å opprette og brenne CD'er" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Kontor og arbeidsmaskin" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Grafiske programmer så som Gimp" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C og C++ utviklingsbibliotek, programmer og include filer" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Nettverk datamaskintjener" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "Server, Mail/Gruppevare/News" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Spillstasjon" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Videospillere og redigerere" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Multimedia - Grafikk" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Sett med verktøy for å lese og sende e-post og nyheter (pine, mutt, tin...) " "og for se på webben" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Personlig finans" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Et grafisk miljø med et brukervennlig sett med applikasjoner og skrivebords- " "verktøy" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Klienter for forskjellige protokoller inkludert ssh" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internett-gateway" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Lyd og bilde avspilling/redigeringsprogrammer" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Andre grafiske skrivebord" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Redigerere, skall, filverktøy, terminaler" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "Programmer for å håndtere dine finanser, så som gnucash" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Personling informasjonshåndtering" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Multimedia - CD-brenning" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Vitenskaplig arbeidsstasjon" #~ msgid "can not open /etc/inittab for reading: %s" #~ msgstr "kan ikke åpne /etc/inittab for lesing: %s" #, fuzzy #~ msgid "cpu number " #~ msgstr "Telefonnummer" #~ msgid "" #~ "You now have the opportunity to download encryption software.\n" #~ "\n" #~ "WARNING:\n" #~ "\n" #~ "Due to different general requirements applicable to these software and " #~ "imposed\n" #~ "by various jurisdictions, customer and/or end user of theses software " #~ "should\n" #~ "ensure that the laws of his/their jurisdiction allow him/them to " #~ "download, stock\n" #~ "and/or use these software.\n" #~ "\n" #~ "In addition customer and/or end user shall particularly be aware to not " #~ "infringe\n" #~ "the laws of his/their jurisdiction. Should customer and/or end user not\n" #~ "respect the provision of these applicable laws, he/they will incure " #~ "serious\n" #~ "sanctions.\n" #~ "\n" #~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " #~ "liable\n" #~ "for special, indirect or incidental damages whatsoever (including, but " #~ "not\n" #~ "limited to loss of profits, business interruption, loss of commercial " #~ "data and\n" #~ "other pecuniary losses, and eventual liabilities and indemnification to " #~ "be paid\n" #~ "pursuant to a court decision) arising out of use, possession, or the " #~ "sole\n" #~ "downloading of these software, to which customer and/or end user could\n" #~ "eventually have access after having sign up the present agreement.\n" #~ "\n" #~ "\n" #~ "For any queries relating to these agreement, please contact \n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgstr "" #~ "Du har nå mulighet til å laste ned programvare for kryptering.\n" #~ "\n" #~ "ADVARSEL:\n" #~ "\n" #~ "Pga. forskjellige krav som er tillagt denne programvaren og pålagt av " #~ "forskjellige\n" #~ "myndigheter, bør kunde og/eller sluttbruker av denne programvaren " #~ "forsikre seg\n" #~ "om at lovene i sin/deres jurisdiksjon tillater han/dem å laste ned, ha i " #~ "besittelse\n" #~ "og/eller bruke denne programvaren.\n" #~ "\n" #~ "I tillegg skal kunde og/eller sluttbruker spesielt være oppmerksom på å " #~ "ikke bryte\n" #~ "lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n" #~ "respektere bestemmelsene av disse lovene, vil han/de pådra seg alvorlige\n" #~ "sanksjoner.\n" #~ "\n" #~ "Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter " #~ "og/eller\n" #~ "leverandører bli holdt ansvarlige for særskilte, indirekte eller " #~ "tilfeldige\n" #~ "skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap " #~ "av fortjeneste,\n" #~ "forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og " #~ "endelige\n" #~ "ansvarsforhold og erstatninger som skal betales ifølge en rettslig\n" #~ "avgjørelse) oppstå ut av bruk, besittelse, eller ene og alene " #~ "nedlastingen\n" #~ "av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n" #~ "tilgang til etter å ha sagt seg enig i og undertegnet fremviste avtale.\n" #~ "\n" #~ "For spørsmål angående denne avtalen, vennligst kontakt \n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgid "Proxy configuration" #~ msgstr "Proxy-konfigurasjon" #~ msgid "" #~ "Welcome to the proxy configuration utility.\n" #~ "\n" #~ "Here, you'll be able to set up your http and ftp proxies\n" #~ "with or without login and password\n" #~ msgstr "" #~ "Velkommen til proxy-konfigurasjonsverktøyet.\n" #~ "\n" #~ "Her kan du sette opp dine http og ftp proxier\n" #~ "med eller uten brukernavn og passord\n" #~ msgid "" #~ "Please fill in the http proxy informations\n" #~ "Leave it blank if you don't want an http proxy" #~ msgstr "" #~ "Vennligst fill ut med http proxy informasjon\n" #~ "La feltet være hvis du ikke ønsker en http proxy" #~ msgid "URL" #~ msgstr "URL" #~ msgid "port" #~ msgstr "port" #~ msgid "Url should begin with 'http:'" #~ msgstr "URLen bør begynne med \"http:\"" #~ msgid "The port part should be numeric" #~ msgstr "Portnummer burde være numerisk" #~ msgid "" #~ "Please fill in the ftp proxy informations\n" #~ "Leave it blank if you don't want an ftp proxy" #~ msgstr "" #~ "Vennligst fyll ut ftp-proxy informasjonen-nLa feltet være hvis du ikke " #~ "ønsker en ftp-proxy" #~ msgid "" #~ "Please enter proxy login and password, if any.\n" #~ "Leave it blank if you don't want login/passwd" #~ msgstr "" #~ "Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n" #~ "La det være hvis du ikke ønsker brukernavn/passord" #~ msgid "login" #~ msgstr "brukernavn" #~ msgid "password" #~ msgstr "passord" #~ msgid "re-type password" #~ msgstr "skriv inn passord på nytt" #~ msgid "The passwords don't match. Try again!" #~ msgstr "Passordene stemmer ikke overens. Prøv igjen!" #~ msgid "Can't write file %s" #~ msgstr "Kan ikke skrive fil %s" #~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgid "no help implemented yet.\n" #~ msgstr "ingen hjelp implementert ennå.\n" #~ msgid "Please click on a medium" #~ msgstr "Vennligst klikk på ett media" #~ msgid "Removing LPRng..." #~ msgstr "Fjerner LPRng..." #~ msgid "Removing LPD..." #~ msgstr "Fjerner LPD..." #~ msgid "usage: drakfloppy\n" #~ msgstr "bruk: drakfloppy\n" #, fuzzy #~ msgid "" #~ "\n" #~ "Usage: harddrake [-h|--help] [--test]\n" #~ msgstr "bruk: keyboarddrake [--expert] [tastatur]\n" #~ msgid "usage: keyboarddrake [--expert] [keyboard]\n" #~ msgstr "bruk: keyboarddrake [--expert] [tastatur]\n" #~ msgid "Probing %s class\n" #~ msgstr "Søker %s klasse\n" #~ msgid "detected on interface %s" #~ msgstr "oppdaget på grensesnitt %s" #~ msgid "unable to backup lilo message" #~ msgstr "kan ikke ta backup av lilo beskjed" #~ msgid "can't change lilo message" #~ msgstr "kan ikke endre lilo beskjed"