# Dutch translation of DrakX. # Copyright (C) 2000 Free Software Foundation, Inc. # Copyright (c) 2000 MandrakeSoft # Niels Gras , 2000 # Jeroen ten Berge , 2002 # Reinout van Schouwen , 2002-2003 # Peter Bosch , 2002 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2004-03-19 14:32+0100\n" "PO-Revision-Date: 2004-03-25 15:07+0100\n" "Last-Translator: Reinout van Schouwen \n" "Language-Team: Dutch \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../move/move.pm:359 #, c-format msgid "" "Your USB key doesn't have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "Uw USB-key beschikt niet over geldige Windows (FAT) partities.\n" "Die is nodig om verder te kunnen gaan (daarnaast is het meer \n" "algemeen zodat u in staat bent om uw bestanden te benaderen\n" "vanaf andere computers met Windows). Sluit u alstublieft een\n" "USB-key aan waar een Windows-partitie op staat.\n" "\n" "\n" "U kunt ook zonder een USB-key doorgaan - u kunt dan nog steeds\n" "Mandrake Move gebruiken als een normaal Mandrake besturingssysteem." #: ../move/move.pm:369 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "Er is geen USB-key aan uw systeem gevonden. Als u nu\n" "een USB-key inplugt, heeft Mandrake Move de mogelijkheid om de\n" "gegevens op transparante wijze in uw persoonlijke map en\n" "systeemconfiguratie op te slaan, voor de volgende keer dat u \n" "deze computer of een andere opstart. Opmerking: als u nu een \n" "key inplugt, wacht dan enkele seconden voordat u deze weer\n" "probeert te vinden.\n" "\n" "\n" "U kunt ook zonder een USB-key doorgaan - u kunt dan nog steeds\n" "Mandrake Move gebruiken als een normaal Mandrake besturingssysteem." #: ../move/move.pm:380 #, c-format msgid "Need a key to save your data" msgstr "Een key is vereist om uw gegevens op te slaan" #: ../move/move.pm:382 #, c-format msgid "Detect USB key again" msgstr "USB-key opnieuw bespeuren" #: ../move/move.pm:383 ../move/move.pm:413 #, c-format msgid "Continue without USB key" msgstr "Doorgaan zonder USB-key" #: ../move/move.pm:394 ../move/move.pm:408 #, c-format msgid "Key isn't writable" msgstr "Key is niet beschrijfbaar" #: ../move/move.pm:396 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "De USB-key lijkt schrijfbeschermd te zijn, maar hij kan op dit moment niet\n" "veilig ontkoppeld worden.\n" "\n" "\n" "Klik op de knop om de computer opnieuw op te starten, ontkoppel de USB-key,\n" "maak de schrijfbescherming ongedaan, plug hem opnieuw in, en start\n" "Mandrake Move opnieuw." #: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1319 #, c-format msgid "Reboot" msgstr "Herstarten" #: ../move/move.pm:410 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "De USB-key is waarschijnlijk schrijfbeschermd. Ontkoppel hem,\n" "maak de schrijfbescherming ongedaan en plug hem opnieuw in." #: ../move/move.pm:412 #, c-format msgid "Retry" msgstr "Opnieuw" #: ../move/move.pm:423 #, c-format msgid "Setting up USB key" msgstr "Bezig met instellen van USB-key" #: ../move/move.pm:423 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Even geduld, bezig met instellen van systeemconfiguratie op USB-key..." #: ../move/move.pm:445 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" "Voer uw gebruikersinformatie in, het wachtwoord is nodig voor de " "schermbeveiliging" #: ../move/move.pm:455 #, c-format msgid "Auto configuration" msgstr "Automatische configuratie" #: ../move/move.pm:455 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Even geduld, bezig met bespeuren en configureren van apparaten..." #: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563 #: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117 #: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228 #: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384 #: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510 #: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82 #: install_steps_interactive.pm:40 interactive/http.pm:118 #: interactive/http.pm:119 network/netconnect.pm:929 network/netconnect.pm:932 #: network/netconnect.pm:977 network/netconnect.pm:981 #: network/netconnect.pm:1048 network/netconnect.pm:1098 #: network/netconnect.pm:1103 network/netconnect.pm:1118 #: network/netconnect.pm:1327 printer/printerdrake.pm:213 #: printer/printerdrake.pm:220 printer/printerdrake.pm:245 #: printer/printerdrake.pm:393 printer/printerdrake.pm:398 #: printer/printerdrake.pm:411 printer/printerdrake.pm:421 #: printer/printerdrake.pm:1067 printer/printerdrake.pm:1114 #: printer/printerdrake.pm:1151 printer/printerdrake.pm:1195 #: printer/printerdrake.pm:1199 printer/printerdrake.pm:1213 #: printer/printerdrake.pm:1303 printer/printerdrake.pm:1383 #: printer/printerdrake.pm:1387 printer/printerdrake.pm:1391 #: printer/printerdrake.pm:1440 printer/printerdrake.pm:1497 #: printer/printerdrake.pm:1501 printer/printerdrake.pm:1515 #: printer/printerdrake.pm:1625 printer/printerdrake.pm:1629 #: printer/printerdrake.pm:1666 printer/printerdrake.pm:1731 #: printer/printerdrake.pm:1749 printer/printerdrake.pm:1758 #: printer/printerdrake.pm:1767 printer/printerdrake.pm:1778 #: printer/printerdrake.pm:1840 printer/printerdrake.pm:2285 #: printer/printerdrake.pm:2551 printer/printerdrake.pm:2557 #: printer/printerdrake.pm:3010 printer/printerdrake.pm:3014 #: printer/printerdrake.pm:3018 printer/printerdrake.pm:3421 #: printer/printerdrake.pm:3664 printer/printerdrake.pm:3677 #: printer/printerdrake.pm:3817 printer/printerdrake.pm:3909 #: standalone/drakTermServ:415 standalone/drakTermServ:768 #: standalone/drakTermServ:775 standalone/drakTermServ:970 #: standalone/drakTermServ:1415 standalone/drakTermServ:1420 #: standalone/drakTermServ:1427 standalone/drakTermServ:1438 #: standalone/drakTermServ:1458 standalone/drakauth:36 #: standalone/drakbackup:581 standalone/drakbackup:694 #: standalone/drakbackup:1187 standalone/drakbackup:1220 #: standalone/drakbackup:1735 standalone/drakbackup:1898 #: standalone/drakbackup:2513 standalone/drakbackup:4286 #: standalone/drakbackup:4509 standalone/drakboot:237 standalone/drakbug:267 #: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:608 #: standalone/drakconnect:611 standalone/drakconnect:632 #: standalone/drakfloppy:301 standalone/drakfloppy:305 #: standalone/drakfloppy:311 standalone/drakfont:210 standalone/drakfont:223 #: standalone/drakfont:259 standalone/drakfont:600 standalone/draksplash:21 #: standalone/logdrake:170 standalone/logdrake:467 standalone/logdrake:472 #: standalone/scannerdrake:58 standalone/scannerdrake:200 #: standalone/scannerdrake:259 standalone/scannerdrake:683 #: standalone/scannerdrake:694 standalone/scannerdrake:833 #: standalone/scannerdrake:844 standalone/scannerdrake:914 wizards.pm:95 #: wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Fout" #: ../move/move.pm:503 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Er is een fout opgetreden waarvoor de juiste afhandeling onbekend is.\n" "Als u verdergaat, is dit op eigen risico." #: ../move/move.pm:559 install_steps_interactive.pm:40 #, c-format msgid "An error occurred" msgstr "Er is een fout opgetreden" #: ../move/move.pm:565 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "Er is een fout opgetreden:\n" "\n" "\n" "%s\n" "\n" "Dit zou veroorzaakt kunnen worden door gecorrumpeerde \n" "systeemconfiguratiebestanden op de USB-key. In dit \n" "geval kan het probleem opgelost worden door ze te \n" "verwijderen en Mandrake Move te herstarten. Klik op de\n" "overeenkomstige knop als u dit wilt doen.\n" "\n" "\n" "Wellicht wilt u ook herstarten en de USB-key verwijderen,\n" "of de inhoud ervan onder een ander besturingssysteem\n" "bekijken. U zou zelfs de logbestanden kunnen inspecteren\n" "in console #3 en #4 om te pogen erachter te komen wat er\n" "aan de hand is." #: ../move/move.pm:580 #, c-format msgid "Remove system config files" msgstr "Systeemconfiguratiebestanden verwijderen" #: ../move/move.pm:581 #, c-format msgid "Simply reboot" msgstr "Gewoon herstarten" #: ../move/tree/mdk_totem:60 #, c-format msgid "You can only run with no CDROM support" msgstr "U kunt alleen multimedia afspelen zonder CD-ROM-ondersteuning" #: ../move/tree/mdk_totem:81 #, c-format msgid "Kill those programs" msgstr "Die programma's vernietigen" #: ../move/tree/mdk_totem:82 #, c-format msgid "No CDROM support" msgstr "Geen CD-ROM-ondersteuning" #: ../move/tree/mdk_totem:87 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" "U kunt geen andere CD-ROM gebruiken wanneer de volgende programma's \n" "actief zijn:\n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "Kopiëren naar geheugen om verwijderen CD-ROM mogelijk te maken" #: Xconfig/card.pm:16 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:17 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:18 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:19 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:20 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:21 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:22 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:23 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:24 #, c-format msgid "64 MB or more" msgstr "64 MB of meer" #: Xconfig/card.pm:211 #, c-format msgid "X server" msgstr "X-server" #: Xconfig/card.pm:212 #, c-format msgid "Choose an X server" msgstr "Kies een X-server" #: Xconfig/card.pm:244 #, c-format msgid "Multi-head configuration" msgstr "Multi-koppen instelling" #: Xconfig/card.pm:245 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Uw computer ondersteunt een instelling met meerdere koppen.\n" "Want wenst u te doen?" #: Xconfig/card.pm:312 #, c-format msgid "Can't install XFree package: %s" msgstr "Kan XFree-pakket niet installeren: %s" #: Xconfig/card.pm:322 #, c-format msgid "Select the memory size of your graphics card" msgstr "Selecteer de geheugengrootte van uw grafische kaart" #: Xconfig/card.pm:398 #, c-format msgid "XFree configuration" msgstr "XFree instellingen" #: Xconfig/card.pm:400 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Welke instellingen van XFree wilt u hebben?" #: Xconfig/card.pm:434 #, c-format msgid "Configure all heads independently" msgstr "Alle koppen afzonderlijk configureren" #: Xconfig/card.pm:435 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama-uitbreiding gebruiken" #: Xconfig/card.pm:440 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Alleen kaart \"%s\"%s configureren" #: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s met 3D hardware acceleratie" #: Xconfig/card.pm:470 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Uw kaart kan 3D acceleratie ondersteuning krijgen, maar alleen met XFree %" "s.\n" "Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n" "kunnen hebben in 2D." #: Xconfig/card.pm:472 Xconfig/card.pm:495 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s." #: Xconfig/card.pm:480 Xconfig/card.pm:501 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s met EXPERIMENTELE 3D hardware acceleratie" #: Xconfig/card.pm:483 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Uw kaart kan ondersteuning voor 3D hardwareversnelling hebben, maar alleen \n" "met XFree %s, LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW\n" "COMPUTER KAN LATEN VASTLOPEN.\n" "Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n" "kunnen hebben in 2D." #: Xconfig/card.pm:486 Xconfig/card.pm:503 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s.\n" "LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW COMPUTER KAN LATEN " "VASTLOPEN." #: Xconfig/card.pm:509 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (installatie beeldscherm-stuurprogramma)" #: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:823 #, c-format msgid "Custom" msgstr "Aangepast" #: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14 #: install_steps_interactive.pm:83 printer/printerdrake.pm:608 #: printer/printerdrake.pm:4076 standalone/draksplash:120 #: standalone/harddrake2:188 standalone/logdrake:175 #: standalone/scannerdrake:445 #, c-format msgid "Quit" msgstr "Afsluiten" #: Xconfig/main.pm:115 #, c-format msgid "Graphic Card" msgstr "Grafische kaart" #: Xconfig/main.pm:118 Xconfig/monitor.pm:100 #, c-format msgid "Monitor" msgstr "Beeldscherm" #: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228 #, c-format msgid "Resolution" msgstr "Resolutie" #: Xconfig/main.pm:126 #, c-format msgid "Test" msgstr "Test" #: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410 #: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakconnect:263 standalone/drakconnect:272 #: standalone/drakconnect:292 standalone/drakconnect:298 #: standalone/drakconnect:404 standalone/drakconnect:405 #: standalone/drakconnect:576 standalone/drakfont:494 standalone/drakfont:554 #: standalone/harddrake2:185 #, c-format msgid "Options" msgstr "Opties" #: Xconfig/main.pm:180 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Veranderingen bewaren?\n" "De huidige instelling is:\n" "\n" "%s" #: Xconfig/monitor.pm:101 #, c-format msgid "Choose a monitor" msgstr "Selecteer een monitor" #: Xconfig/monitor.pm:107 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:108 mouse.pm:49 #, c-format msgid "Generic" msgstr "Algemeen" #: Xconfig/monitor.pm:109 standalone/drakconnect:556 standalone/harddrake2:68 #: standalone/harddrake2:69 #, c-format msgid "Vendor" msgstr "Fabrikant" #: Xconfig/monitor.pm:119 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Plug'n'Play-bespeuring mislukt. Kiest u alstublieft de juiste monitor." #: Xconfig/monitor.pm:124 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "De twee cruciale parameters zijn de verticale verversingsratio, d.w.z.\n" "de snelheid waarmee het volledige scherm wordt ververst en nog " "belangrijker \n" "de horizontale sync ratio, dit is de snelheid waaraan de scanlijnen worden " "geschreven\n" "\n" "Het is UITERMATE BELANGRIJK dat u geen monitor type opgeeft die een sync " "bereik\n" "heeft die de mogelijkheden van uw monitor overschrijdt: u kan uw monitor " "beschadigen.\n" "Bij twijfel maak een voorzichtige keuze." #: Xconfig/monitor.pm:131 #, c-format msgid "Horizontal refresh rate" msgstr "Horizontale verversingsratio" #: Xconfig/monitor.pm:132 #, c-format msgid "Vertical refresh rate" msgstr "Verticale verversingsratio" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 kleuren (8 bits)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32.000 kleuren (15 bits)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65.000 kleuren (16 bits)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 miljoen kleuren (24 bits)" #: Xconfig/resolution_and_depth.pm:16 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 miljard kleuren (32 bits)" #: Xconfig/resolution_and_depth.pm:141 #, c-format msgid "Resolutions" msgstr "Resoluties" #: Xconfig/resolution_and_depth.pm:275 #, c-format msgid "Choose the resolution and the color depth" msgstr "Kies resolutie en kleurdiepte" #: Xconfig/resolution_and_depth.pm:276 #, c-format msgid "Graphics card: %s" msgstr "Grafische kaart: %s" #: Xconfig/resolution_and_depth.pm:289 interactive.pm:403 #: interactive/gtk.pm:759 interactive/http.pm:103 interactive/http.pm:157 #: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakbackup:4045 standalone/drakbackup:4075 #: standalone/drakbackup:4162 standalone/drakbackup:4175 #: standalone/drakbackup:4247 standalone/drakconnect:165 #: standalone/drakconnect:776 standalone/drakconnect:863 #: standalone/drakconnect:962 standalone/drakups:194 #: standalone/net_monitor:303 ugtk2.pm:413 ugtk2.pm:510 ugtk2.pm:1075 #: ugtk2.pm:1098 #, c-format msgid "Ok" msgstr "Ok" #: Xconfig/resolution_and_depth.pm:289 any.pm:863 diskdrake/smbnfs_gtk.pm:81 #: help.pm:197 help.pm:457 install_steps_gtk.pm:488 #: install_steps_interactive.pm:788 interactive.pm:404 interactive/gtk.pm:763 #: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307 #: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3088 #: standalone/drakautoinst:217 standalone/drakbackup:4009 #: standalone/drakbackup:4035 standalone/drakbackup:4058 #: standalone/drakbackup:4089 standalone/drakbackup:4113 #: standalone/drakbackup:4137 standalone/drakbackup:4189 #: standalone/drakbackup:4216 standalone/drakbackup:4241 #: standalone/drakconnect:164 standalone/drakconnect:861 #: standalone/drakconnect:961 standalone/drakfont:663 standalone/drakfont:740 #: standalone/drakups:201 standalone/logdrake:175 standalone/net_monitor:299 #: ugtk2.pm:407 ugtk2.pm:508 ugtk2.pm:517 ugtk2.pm:1075 #, c-format msgid "Cancel" msgstr "Annuleren" #: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154 #: install_steps_gtk.pm:267 install_steps_gtk.pm:668 interactive.pm:498 #: interactive/gtk.pm:623 interactive/gtk.pm:625 standalone/drakTermServ:316 #: standalone/drakbackup:4010 standalone/drakbackup:4039 #: standalone/drakbackup:4062 standalone/drakbackup:4093 #: standalone/drakbackup:4117 standalone/drakbackup:4141 #: standalone/drakbackup:4174 standalone/drakbackup:4193 #: standalone/drakbackup:4220 standalone/drakbackup:4245 #: standalone/drakbackup:4264 standalone/drakbug:157 #: standalone/drakconnect:160 standalone/drakconnect:236 #: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:296 #: standalone/harddrake2:184 ugtk2.pm:1188 ugtk2.pm:1189 #, c-format msgid "Help" msgstr "Hulp" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Instelling Testen" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Wenst u de instellingen te testen?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Waarschuwing: het testen van deze grafische kaart zou uw computer kunnen " "laten vastlopen" #: Xconfig/test.pm:71 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Er is een fout opgetreden:\n" "%s\n" "U kunt proberen om sommige parameters te veranderen" #: Xconfig/test.pm:149 #, c-format msgid "Leaving in %d seconds" msgstr "Springt terug over %d seconden" #: Xconfig/test.pm:149 #, c-format msgid "Is this the correct setting?" msgstr "Is dit de correcte instelling?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Toetsenbord instelling: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Muistype: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Muis apparaat: %s\n" #: Xconfig/various.pm:32 #, c-format msgid "Monitor: %s\n" msgstr "Beeldscherm: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Horizontale sync beeldscherm: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Verticale verversing beeldscherm: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Graphics card: %s\n" msgstr "Grafische kaart: %s\n" #: Xconfig/various.pm:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Videogeheugen: %s kB\n" #: Xconfig/various.pm:38 #, c-format msgid "Color depth: %s\n" msgstr "Kleurdiepte: %s\n" #: Xconfig/various.pm:39 #, c-format msgid "Resolution: %s\n" msgstr "Resolutie: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86-server: %s\n" #: Xconfig/various.pm:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 stuurprogramma: %s\n" #: Xconfig/various.pm:71 #, c-format msgid "Graphical interface at startup" msgstr "X bij opstarten" #: Xconfig/various.pm:73 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Ik kan uw computer instellen om automatisch X te starten bij het opstarten.\n" "Wenst u X te starten bij het opstarten?" #: Xconfig/various.pm:86 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Uw grafische kaart lijkt een TV-OUT-contact te hebben.\n" "Deze kan worden geconfigureerd om met een 'frame-buffer' te werken.\n" "\n" "Hiervoor dient u uw grafische kaart met uw TV te verbinden voordat u uw " "computer start.\n" "Vervolgens kiest u het \"TVout\"-item in de opstartlader\n" "\n" "Heeft u deze mogelijkheid?" #: Xconfig/various.pm:98 #, c-format msgid "What norm is your TV using?" msgstr "Welke norm gebruikt uw TV?" #: any.pm:103 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259 #: standalone/drakconnect:167 standalone/draksec:56 standalone/drakups:90 #: standalone/drakxtv:90 standalone/harddrake2:134 #: standalone/service_harddrake:98 #, c-format msgid "Please wait" msgstr "Even geduld" #: any.pm:103 #, c-format msgid "Bootloader installation in progress" msgstr "Installatie opstartlader is bezig" #: any.pm:142 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "U heeft besloten om de bootloader op een partitie te installeren.\n" "Dit betekent dat U al een bootloader op de opstart schijf hebt.\n" "(Bijv. System Commander)\n" "\n" "Van welke schijf start U op ?" #: any.pm:165 any.pm:197 help.pm:800 #, c-format msgid "First sector of drive (MBR)" msgstr "Eerste sector van schijf (MBR)" #: any.pm:166 #, c-format msgid "First sector of the root partition" msgstr "Eerste sector van root-partitie" #: any.pm:168 #, c-format msgid "On Floppy" msgstr "Op diskette" #: any.pm:170 help.pm:768 help.pm:800 printer/printerdrake.pm:3418 #, c-format msgid "Skip" msgstr "Overslaan" #: any.pm:175 #, c-format msgid "SILO Installation" msgstr "SILO Installatie" #: any.pm:175 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub-installatie" #: any.pm:176 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Waar wenst u de opstartlader te installeren?" #: any.pm:197 #, c-format msgid "First sector of boot partition" msgstr "Eerste sector van boot-partitie" #: any.pm:208 #, c-format msgid "Boot Style Configuration" msgstr "Configuratie van opstartstijl" #: any.pm:210 any.pm:244 #, c-format msgid "Bootloader main options" msgstr "Opstartlader algemene opties" #: any.pm:214 #, c-format msgid "Give the ram size in MB" msgstr "Geef de RAM-grootte in MB" #: any.pm:216 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "De optie ``Opdrachtregel-opties beperken'' heeft geen nut zonder wachtwoord" #: any.pm:217 any.pm:524 install_steps_interactive.pm:1163 #, c-format msgid "The passwords do not match" msgstr "De wachtwoorden komen niet overeen" #: any.pm:217 any.pm:524 diskdrake/interactive.pm:1255 #: install_steps_interactive.pm:1163 #, c-format msgid "Please try again" msgstr "Probeert u het opnieuw" #: any.pm:222 any.pm:247 help.pm:768 #, c-format msgid "Bootloader to use" msgstr "Welke opstartlader te gebruiken" #: any.pm:224 #, c-format msgid "Bootloader installation" msgstr "Installatie opstartlader" #: any.pm:226 any.pm:249 help.pm:768 #, c-format msgid "Boot device" msgstr "Opstartapparaat" #: any.pm:228 #, c-format msgid "Delay before booting default image" msgstr "Wachttijd voor het opstarten van standaard beeldbestand" #: any.pm:229 help.pm:768 #, c-format msgid "Enable ACPI" msgstr "ACPI inschakelen" #: any.pm:230 #, c-format msgid "Force No APIC" msgstr "Geen APIC forceren" #: any.pm:232 any.pm:551 diskdrake/smbnfs_gtk.pm:180 #: install_steps_interactive.pm:1168 network/netconnect.pm:562 #: printer/printerdrake.pm:1374 printer/printerdrake.pm:1494 #: standalone/drakbackup:1717 standalone/drakbackup:3592 #: standalone/drakups:278 #, c-format msgid "Password" msgstr "Wachtwoord" #: any.pm:233 any.pm:552 install_steps_interactive.pm:1169 #, c-format msgid "Password (again)" msgstr "Wachtwoord (nogmaals)" #: any.pm:234 #, c-format msgid "Restrict command line options" msgstr "Opdrachtregel-opties beperken" #: any.pm:234 #, c-format msgid "restrict" msgstr "beperken" #: any.pm:236 #, c-format msgid "Clean /tmp at each boot" msgstr "Elke keer bij opstarten /tmp legen" #: any.pm:237 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Juiste RAM-grootte (indien nodig) (%d MB gevonden)" #: any.pm:239 #, c-format msgid "Enable multiple profiles" msgstr "Meerdere profielen inschakelen" #: any.pm:248 #, c-format msgid "Init Message" msgstr "Initialisatie-bericht" #: any.pm:250 #, c-format msgid "Open Firmware Delay" msgstr "Open Firmware-vertraging" #: any.pm:251 #, c-format msgid "Kernel Boot Timeout" msgstr "Kernel opstart-wachttijd" #: any.pm:252 #, c-format msgid "Enable CD Boot?" msgstr "CD-opstart inschakelen?" #: any.pm:253 #, c-format msgid "Enable OF Boot?" msgstr "OF-opstart inschakelen?" #: any.pm:254 #, c-format msgid "Default OS?" msgstr "Standaard besturingssysteem?" #: any.pm:295 #, c-format msgid "Image" msgstr "Beeldbestand" #: any.pm:296 any.pm:305 #, c-format msgid "Root" msgstr "Root" #: any.pm:297 any.pm:318 #, c-format msgid "Append" msgstr "Toevoegen" #: any.pm:299 #, c-format msgid "Video mode" msgstr "Video-modus" #: any.pm:301 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:310 any.pm:315 any.pm:317 #, c-format msgid "Label" msgstr "Naam" #: any.pm:312 any.pm:322 harddrake/v4l.pm:236 standalone/drakfloppy:88 #: standalone/drakfloppy:94 #, c-format msgid "Default" msgstr "Standaard" #: any.pm:319 #, c-format msgid "Initrd-size" msgstr "Initrd-grootte" #: any.pm:321 #, c-format msgid "NoVideo" msgstr "Geen video" #: any.pm:332 #, c-format msgid "Empty label not allowed" msgstr "Lege naam is niet toegelaten" #: any.pm:333 #, c-format msgid "You must specify a kernel image" msgstr "U dient een kernel-bestand aan te geven" #: any.pm:333 #, c-format msgid "You must specify a root partition" msgstr "U dient een root-partitie aan te geven" #: any.pm:334 #, c-format msgid "This label is already used" msgstr "Dit label is al in gebruik" #: any.pm:347 #, c-format msgid "Which type of entry do you want to add?" msgstr "Welk type waarde wenst u toe te voegen?" #: any.pm:348 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:348 #, c-format msgid "Other OS (SunOS...)" msgstr "Ander OS (SunOS...)" #: any.pm:349 #, c-format msgid "Other OS (MacOS...)" msgstr "Ander OS (MacOS...)" #: any.pm:349 #, c-format msgid "Other OS (windows...)" msgstr "Ander OS (Windows...)" #: any.pm:377 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Hier zijn de waardes voor uw opstartmenu tot dusver.\n" "U kunt er enkele toevoegen of de bestaande wijzigen." #: any.pm:509 #, c-format msgid "access to X programs" msgstr "toegang tot X-programma's" #: any.pm:510 #, c-format msgid "access to rpm tools" msgstr "toegang tot rpm-programmatuur" #: any.pm:511 #, c-format msgid "allow \"su\"" msgstr "\"su\" toestaan" #: any.pm:512 #, c-format msgid "access to administrative files" msgstr "toegang tot administratieve bestanden" #: any.pm:513 #, c-format msgid "access to network tools" msgstr "toegang tot netwerkprogrammatuur" #: any.pm:514 #, c-format msgid "access to compilation tools" msgstr "toegang tot compileerprogrammatuur" #: any.pm:520 #, c-format msgid "(already added %s)" msgstr "(%s reeds toegevoegd)" #: any.pm:525 #, c-format msgid "This password is too simple" msgstr "Dit wachtwoord is te eenvoudig" #: any.pm:526 #, c-format msgid "Please give a user name" msgstr "Geef een gebruikersnaam" #: any.pm:527 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "De gebruikersnaam mag slechts kleine letters, cijfers, `-' en`_' bevatten" #: any.pm:528 #, c-format msgid "The user name is too long" msgstr "Deze gebruikersnaam is te lang" #: any.pm:529 #, c-format msgid "This user name has already been added" msgstr "Deze gebruikersnaam is al toegevoegd" #: any.pm:533 #, c-format msgid "Add user" msgstr "Gebruiker toevoegen" #: any.pm:534 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Voer gebruiker in\n" "%s" #: any.pm:537 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158 #: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544 #: interactive/http.pm:152 printer/printerdrake.pm:165 #: printer/printerdrake.pm:352 printer/printerdrake.pm:4076 #: standalone/drakbackup:2802 standalone/scannerdrake:636 #: standalone/scannerdrake:786 #, c-format msgid "Done" msgstr "Klaar" #: any.pm:538 help.pm:52 #, c-format msgid "Accept user" msgstr "Gebruiker OK" #: any.pm:549 #, c-format msgid "Real name" msgstr "Echte naam" #: any.pm:550 help.pm:52 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1493 #, c-format msgid "User name" msgstr "Gebruikersnaam" #: any.pm:553 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:555 #, c-format msgid "Icon" msgstr "Pictogram" #: any.pm:596 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Auto-aanmelden" #: any.pm:597 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "Automatische aanmelding van één gebruiker is instelbaar." #: any.pm:598 help.pm:52 #, c-format msgid "Do you want to use this feature?" msgstr "Wilt u van deze mogelijkheid gebruik maken?" #: any.pm:599 #, c-format msgid "Choose the default user:" msgstr "Kies de standaard gebruiker:" #: any.pm:600 #, c-format msgid "Choose the window manager to run:" msgstr "Kies de te gebruiken werkomgeving:" #: any.pm:612 #, c-format msgid "Please choose a language to use." msgstr "Kies de taal die u wenst te gebruiken." #: any.pm:633 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrakelinux kan meerdere talen aan. Selecteer de talen\n" "die u wenst te installeren. Ze zullen beschikbaar zijn wanneer\n" "de installatie afgerond is en u uw computer opnieuw start." #: any.pm:651 help.pm:660 #, c-format msgid "Use Unicode by default" msgstr "Overal Unicode gebruiken" #: any.pm:652 help.pm:660 #, c-format msgid "All languages" msgstr "Alle talen" #: any.pm:688 help.pm:581 help.pm:991 install_steps_interactive.pm:908 #, c-format msgid "Country / Region" msgstr "Land" #: any.pm:689 #, c-format msgid "Please choose your country." msgstr "Kies uw land alstublieft." #: any.pm:691 #, c-format msgid "Here is the full list of available countries" msgstr "Dit is de volledige lijst van beschikbare landen" #: any.pm:692 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621 #: help.pm:991 install_steps_interactive.pm:114 #, c-format msgid "More" msgstr "Meer" #: any.pm:823 #, c-format msgid "No sharing" msgstr "Niet delen" #: any.pm:823 #, c-format msgid "Allow all users" msgstr "Alle gebruikers toestaan" #: any.pm:827 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Wilt U gebruikers toestaan om enkele eigen mappen te delen?\n" "Door dit toe te staan kunnen gebruikers in Konquerer en nautilus\n" "eenvoudig met een klik op \"Delen\" hun mappen delen.\n" "\n" "\"Aangepast\": per-gebruiker instellingen toestaan.\n" #: any.pm:843 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "U kunt bestandssystemen delen met behulp van NFS of Samba. Welke daarvan " "wilt u gebruiken?" #: any.pm:851 #, c-format msgid "The package %s is going to be removed." msgstr "Het pakket %s zal worden gedeïnstalleerd." #: any.pm:863 #, c-format msgid "Launch userdrake" msgstr "Userdrake opstarten" #: any.pm:865 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "De 'per gebruiker delen'-functie gebruikt de groep\n" "\"fileshare\". U kunt met userdrake een gebruiker\n" "aan deze groep toevoegen." #: authentication.pm:12 #, c-format msgid "Local files" msgstr "Bestanden op deze computer" #: authentication.pm:12 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:12 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:12 authentication.pm:50 #, c-format msgid "Windows Domain" msgstr "Windows-domein" #: authentication.pm:33 #, c-format msgid "Authentication LDAP" msgstr "LDAP-aanmeldingscontrole" #: authentication.pm:34 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: authentication.pm:35 #, c-format msgid "LDAP Server" msgstr "LDAP-server" #: authentication.pm:40 #, c-format msgid "Authentication NIS" msgstr "NIS-aanmeldingscontrole" #: authentication.pm:41 #, c-format msgid "NIS Domain" msgstr "NIS-domein" #: authentication.pm:42 #, c-format msgid "NIS Server" msgstr "NIS-server" #: authentication.pm:47 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Om dit te laten werken met een W2K PDC, zal de beheerder de volgende " "opdracht moeten uitvoeren en de server opnieuw opstarten: 'C:\\>net " "localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add'\n" "U zult tevens de gebruikersnaam/wachtwoord van de domeinbeheerder nodig " "hebben om de computer deel te laten nemen aan het Windows(TM)-domein.\n" "Indien de netwerkfunctionaliteit nog niet is ingeschakeld, zal DrakX " "trachten zich bij het domein te voegen na afloop van de stap netwerk-" "instellingen.\n" "Mocht deze instelling om wat voor reden dan ook mislukken en de " "domeinaanmeldingscontrole werkt niet, herstart dan het systeem en voer " "'smbpasswd -j DOMEIN -U GEBRUIKER%%WACHTWOORD' uit waarbij u uw Windows(TM)-" "domein en beheerdersgebruikersnaam en -wachtwoord invult.\n" "De opdracht 'wbinfo -t' gaat na of uw aanmeldingscontrole-geheimen kloppen." #: authentication.pm:49 #, c-format msgid "Authentication Windows Domain" msgstr "Aanmeldingscontrole Windows-domein" #: authentication.pm:51 #, c-format msgid "Domain Admin User Name" msgstr "Gebruikersnaam van domeinbeheerder" #: authentication.pm:52 #, c-format msgid "Domain Admin Password" msgstr "Wachtwoord domeinbeheerder" #: authentication.pm:83 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Kan niet uitzenden zonder NIS-domein" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:533 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Welkom bij de besturingssysteemkiezer!\n" "\n" "Kies een besturingssysteem uit de bovenstaande lijst\n" "of wacht even op de standaard-opstartprocedure.\n" #: bootloader.pm:665 #, c-format msgid "SILO" msgstr "SILO" #: bootloader.pm:668 help.pm:768 #, c-format msgid "LILO with graphical menu" msgstr "LILO met grafisch menu" #: bootloader.pm:670 help.pm:768 #, c-format msgid "LILO with text menu" msgstr "LILO met tekst-menu" #: bootloader.pm:672 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:674 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:1147 #, c-format msgid "not enough room in /boot" msgstr "niet genoeg ruimte in /boot" #: bootloader.pm:1175 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "U kunt de opstartlader niet installeren op een %s-partitie\n" #: bootloader.pm:1219 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "De configuratie van uw opstartlader moet bijgewerkt worden omdat de partitie " "is omgenummerd" #: bootloader.pm:1226 #, c-format msgid "" "The bootloader can't be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "Kan de opstartlader niet correct installeren. U dient in rescue-modus op te " "starten en \"%s\" te kiezen" #: bootloader.pm:1227 #, c-format msgid "Re-install Boot Loader" msgstr "Opstartlader herinstalleren" #: common.pm:125 #, c-format msgid "KB" msgstr "KB" #: common.pm:125 #, c-format msgid "MB" msgstr "MB" #: common.pm:125 #, c-format msgid "GB" msgstr "GB" #: common.pm:133 #, c-format msgid "TB" msgstr "TB" #: common.pm:141 #, c-format msgid "%d minutes" msgstr "%d minuten" #: common.pm:143 #, c-format msgid "1 minute" msgstr "1 minuut" #: common.pm:145 #, c-format msgid "%d seconds" msgstr "%d seconden" #: common.pm:197 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Kan geen schermafdruk maken voor het partitioneren" #: common.pm:204 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Schermafdrukken zullen beschikbaar zijn na installatie in %s" #: common.pm:269 #, c-format msgid "kdesu missing" msgstr "kdesu is afwezig!" #: common.pm:272 #, c-format msgid "consolehelper missing" msgstr "ontbrekende console-hulp" #: crypto.pm:14 crypto.pm:28 lang.pm:236 network/adsl_consts.pm:44 #: network/adsl_consts.pm:55 network/adsl_consts.pm:65 #: network/adsl_consts.pm:75 network/adsl_consts.pm:86 #: network/adsl_consts.pm:97 network/adsl_consts.pm:107 #: network/adsl_consts.pm:117 network/adsl_consts.pm:264 #: network/netconnect.pm:46 #, c-format msgid "France" msgstr "Frankrijk" #: crypto.pm:15 lang.pm:212 #, c-format msgid "Costa Rica" msgstr "Costa Rica" #: crypto.pm:16 crypto.pm:29 lang.pm:184 network/adsl_consts.pm:26 #: network/adsl_consts.pm:36 network/netconnect.pm:49 #, c-format msgid "Belgium" msgstr "België" #: crypto.pm:17 crypto.pm:30 lang.pm:217 #, c-format msgid "Czech Republic" msgstr "Tsjechische Republiek" #: crypto.pm:18 crypto.pm:31 lang.pm:218 network/adsl_consts.pm:134 #: network/adsl_consts.pm:142 #, c-format msgid "Germany" msgstr "Duitsland" #: crypto.pm:19 crypto.pm:32 lang.pm:249 #, c-format msgid "Greece" msgstr "Griekenland" #: crypto.pm:20 crypto.pm:33 lang.pm:322 #, c-format msgid "Norway" msgstr "Noorwegen" #: crypto.pm:21 crypto.pm:34 lang.pm:351 network/adsl_consts.pm:240 #, c-format msgid "Sweden" msgstr "Zweden" #: crypto.pm:22 crypto.pm:36 lang.pm:321 network/adsl_consts.pm:178 #: network/netconnect.pm:47 #, c-format msgid "Netherlands" msgstr "Nederland" #: crypto.pm:23 crypto.pm:37 lang.pm:269 network/adsl_consts.pm:158 #: network/adsl_consts.pm:168 network/netconnect.pm:48 standalone/drakxtv:48 #, c-format msgid "Italy" msgstr "Italië" #: crypto.pm:24 crypto.pm:38 lang.pm:177 #, c-format msgid "Austria" msgstr "Oostenrijk" #: crypto.pm:35 crypto.pm:65 lang.pm:385 network/netconnect.pm:50 #, c-format msgid "United States" msgstr "Verenigde Staten" #: diskdrake/dav.pm:19 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV is een protocol dat u in staat stelt een map op een web server\n" "lokaal te koppelen, en deze te behandelen alsof het een lokaal bestands-\n" "systeem is (vooropgesteld dat de web server geconfigureerd is als een\n" "WebDAV-server). Indien u WebDAV-koppelpunten wenst toe te voegen,selecteer " "dan \"Nieuw\"." #: diskdrake/dav.pm:27 #, c-format msgid "New" msgstr "Nieuw" #: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Ontkoppelen" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Koppelen" #: diskdrake/dav.pm:65 help.pm:137 #, c-format msgid "Server" msgstr "Server" #: diskdrake/dav.pm:66 diskdrake/interactive.pm:408 #: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Koppelpunt" #: diskdrake/dav.pm:85 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Geef de URL van de WebDAV-server in" #: diskdrake/dav.pm:89 #, c-format msgid "The URL must begin with http:// or https://" msgstr "De URL moet beginnen met http:// of https://" #: diskdrake/dav.pm:111 #, c-format msgid "Server: " msgstr "Server:" #: diskdrake/dav.pm:112 diskdrake/interactive.pm:469 #: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225 #, c-format msgid "Mount point: " msgstr "Koppelpunt: " #: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233 #, c-format msgid "Options: %s" msgstr "Opties: %s" #: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995 #: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065 #, c-format msgid "Read carefully!" msgstr "Lees aandachtig!" #: diskdrake/hd_gtk.pm:96 #, c-format msgid "Please make a backup of your data first" msgstr "Maak eerst een veiligheidskopie van uw gegevens" #: diskdrake/hd_gtk.pm:99 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Als u aboot wenst te gebruiken, wees dan voorzichtig en laat vrije ruimte " "over (2048 sectoren is genoeg)\n" "aan het begin van de schijf" #: diskdrake/hd_gtk.pm:156 help.pm:544 #, c-format msgid "Wizard" msgstr "Wizard" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "Choose action" msgstr "Kies een actie" #: diskdrake/hd_gtk.pm:193 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "U heeft één grote Microsoft Windows-partitie.\n" "Het is aanbevolen dat u eerst de grootte van die partitie aanpast\n" "(klik erop, en klik daarna op \"Grootte aanpassen\")" #: diskdrake/hd_gtk.pm:195 #, c-format msgid "Please click on a partition" msgstr "Klik op een partitie" #: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:475 #: standalone/drakbackup:3040 standalone/drakbackup:3102 #, c-format msgid "Details" msgstr "Details" #: diskdrake/hd_gtk.pm:255 #, c-format msgid "No hard drives found" msgstr "Geen harde schijven gevonden" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Journalised FS" msgstr "Gejournaliseerd bestandssysteem" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Swap" msgstr "Virtueel" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:327 mouse.pm:167 #: services.pm:164 standalone/drakbackup:1673 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Overig" #: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165 #, c-format msgid "Empty" msgstr "Leeg" #: diskdrake/hd_gtk.pm:331 #, c-format msgid "Filesystem types:" msgstr "Bestandssysteemtypes:" #: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353 #, c-format msgid "Use ``%s'' instead" msgstr "``%s'' in plaats gebruiken" #: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353 #: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569 #: diskdrake/removable.pm:26 diskdrake/removable.pm:49 #: standalone/harddrake2:67 #, c-format msgid "Type" msgstr "Type" #: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431 #, c-format msgid "Create" msgstr "Aanmaken" #: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418 #: standalone/drakperm:124 standalone/printerdrake:231 #, c-format msgid "Delete" msgstr "Verwijderen" #: diskdrake/hd_gtk.pm:353 #, c-format msgid "Use ``Unmount'' first" msgstr "Gebruik eerst ``Ontkoppelen''" #: diskdrake/interactive.pm:179 #, c-format msgid "Choose another partition" msgstr "Kies een andere partitie" #: diskdrake/interactive.pm:179 #, c-format msgid "Choose a partition" msgstr "Kies een partitie" #: diskdrake/interactive.pm:208 #, c-format msgid "Exit" msgstr "Afsluiten" #: diskdrake/interactive.pm:241 help.pm:544 #, c-format msgid "Undo" msgstr "Ongedaan maken" #: diskdrake/interactive.pm:241 #, c-format msgid "Toggle to normal mode" msgstr "Naar normale modus" #: diskdrake/interactive.pm:241 #, c-format msgid "Toggle to expert mode" msgstr "Naar expert-modus" #: diskdrake/interactive.pm:260 #, c-format msgid "Continue anyway?" msgstr "Toch doorgaan?" #: diskdrake/interactive.pm:265 #, c-format msgid "Quit without saving" msgstr "Afsluiten zonder opslaan" #: diskdrake/interactive.pm:265 #, c-format msgid "Quit without writing the partition table?" msgstr "Afsluiten zonder de partitietabel weg te schrijven?" #: diskdrake/interactive.pm:270 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Wilt u de /etc/fstab aanpassingen bewaren" #: diskdrake/interactive.pm:277 install_steps_interactive.pm:301 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "U dient te herstarten om de wijzigingen in de partitietabel te activeren." #: diskdrake/interactive.pm:290 help.pm:544 #, c-format msgid "Clear all" msgstr "Alles wissen" #: diskdrake/interactive.pm:291 help.pm:544 #, c-format msgid "Auto allocate" msgstr "Automatisch toewijzen" #: diskdrake/interactive.pm:297 #, c-format msgid "Hard drive information" msgstr "Informatie over harde schijf" #: diskdrake/interactive.pm:329 #, c-format msgid "All primary partitions are used" msgstr "Alle primaire partities zijn al toegewezen" #: diskdrake/interactive.pm:330 #, c-format msgid "I can't add any more partitions" msgstr "U kunt geen partitie meer toevoegen" #: diskdrake/interactive.pm:331 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Om meer partities te kunnen maken, zal u er een moeten verwijderen. Dan kan\n" "er een uitgebreide (extended) partitie worden bijgemaakt" #: diskdrake/interactive.pm:342 help.pm:544 #, c-format msgid "Save partition table" msgstr "Partitietabel schrijven" #: diskdrake/interactive.pm:343 help.pm:544 #, c-format msgid "Restore partition table" msgstr "Partitietabel terughalen" #: diskdrake/interactive.pm:344 help.pm:544 #, c-format msgid "Rescue partition table" msgstr "Partitietabel redden" #: diskdrake/interactive.pm:346 help.pm:544 #, c-format msgid "Reload partition table" msgstr "Partitietabel opnieuw laden" #: diskdrake/interactive.pm:348 #, c-format msgid "Removable media automounting" msgstr "Automatische koppeling van verwisselbare media" #: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377 #, c-format msgid "Select file" msgstr "Selecteer bestand" #: diskdrake/interactive.pm:364 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "De backup partitietabel heeft niet dezelfde grootte\n" "Toch verdergaan?" #: diskdrake/interactive.pm:378 harddrake/sound.pm:226 keyboard.pm:314 #: network/netconnect.pm:438 network/netconnect.pm:457 #: network/netconnect.pm:641 printer/printerdrake.pm:936 #: printer/printerdrake.pm:1891 printer/printerdrake.pm:1953 #: printer/printerdrake.pm:1987 printer/printerdrake.pm:2291 #: printer/printerdrake.pm:3149 printer/printerdrake.pm:3426 #: printer/printerdrake.pm:3545 printer/printerdrake.pm:4543 #: standalone/drakTermServ:351 standalone/drakTermServ:1082 #: standalone/drakTermServ:1138 standalone/drakTermServ:1801 #: standalone/drakbackup:580 standalone/drakbackup:678 standalone/drakboot:138 #: standalone/drakclock:204 standalone/drakconnect:898 #: standalone/drakfloppy:295 standalone/drakups:27 standalone/scannerdrake:50 #: standalone/scannerdrake:908 #, c-format msgid "Warning" msgstr "Waarschuwing" #: diskdrake/interactive.pm:379 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Plaats een diskette in station\n" "Alle gegevens op deze diskette zullen verloren gaan" #: diskdrake/interactive.pm:390 #, c-format msgid "Trying to rescue partition table" msgstr "Proberen om partitietabel te redden" #: diskdrake/interactive.pm:396 #, c-format msgid "Detailed information" msgstr "Gedetailleerde informatie" #: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706 #, c-format msgid "Resize" msgstr "Grootte aanpassen" #: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774 #, c-format msgid "Move" msgstr "Verplaatsen" #: diskdrake/interactive.pm:413 #, c-format msgid "Format" msgstr "Formatteren" #: diskdrake/interactive.pm:415 #, c-format msgid "Add to RAID" msgstr "Toevoegen aan RAID" #: diskdrake/interactive.pm:416 #, c-format msgid "Add to LVM" msgstr "Toevoegen aan LVM" #: diskdrake/interactive.pm:419 #, c-format msgid "Remove from RAID" msgstr "Verwijderen uit RAID" #: diskdrake/interactive.pm:420 #, c-format msgid "Remove from LVM" msgstr "Verwijderen uit LVM" #: diskdrake/interactive.pm:421 #, c-format msgid "Modify RAID" msgstr "RAID aanpassen" #: diskdrake/interactive.pm:422 #, c-format msgid "Use for loopback" msgstr "Voor Loopback gebruiken" #: diskdrake/interactive.pm:462 #, c-format msgid "Create a new partition" msgstr "Nieuwe partitie creëren" #: diskdrake/interactive.pm:465 #, c-format msgid "Start sector: " msgstr "Start-sector: " #: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876 #, c-format msgid "Size in MB: " msgstr "Grootte in MB: " #: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877 #, c-format msgid "Filesystem type: " msgstr "Bestandssysteem-type: " #: diskdrake/interactive.pm:473 #, c-format msgid "Preference: " msgstr "Voorkeur: " #: diskdrake/interactive.pm:476 #, c-format msgid "Logical volume name " msgstr "Logische volumenaam " #: diskdrake/interactive.pm:505 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "U kunt geen nieuwe partitie aanmaken, omdat u\n" "het maximale aantal primaire partities bereikt hebt.\n" "Verwijder eerst een primaire partitie en creëer een uitgebreide partitie." #: diskdrake/interactive.pm:535 #, c-format msgid "Remove the loopback file?" msgstr "Het loopback-bestand verwijderen?" #: diskdrake/interactive.pm:554 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Na het veranderen van het type van partitie %s, zullen alle gegevens op deze " "partitie verloren gaan" #: diskdrake/interactive.pm:565 #, c-format msgid "Change partition type" msgstr "Partitietype veranderen" #: diskdrake/interactive.pm:566 diskdrake/removable.pm:48 #, c-format msgid "Which filesystem do you want?" msgstr "Welk bestandssysteem wilt u?" #: diskdrake/interactive.pm:574 #, c-format msgid "Switching from ext2 to ext3" msgstr "Omschakelen van ext2 naar ext3" #: diskdrake/interactive.pm:603 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Waar wenst u het loopback-bestand %s aan te koppelen?" #: diskdrake/interactive.pm:604 #, c-format msgid "Where do you want to mount device %s?" msgstr "Waar wilt u apparaat %s koppelen?" #: diskdrake/interactive.pm:609 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Kan een koppelpunt niet verzetten omdat deze partitie gebruikt wordt als\n" "loopback. Verwijder de loopback eerst." #: diskdrake/interactive.pm:634 #, c-format msgid "Where do you want to mount %s?" msgstr "Waar wilt u %s koppelen?" #: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738 #: install_interactive.pm:156 install_interactive.pm:186 #, c-format msgid "Resizing" msgstr "Grootte aanpassen" #: diskdrake/interactive.pm:658 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Bezig met berekenen van FAT bestandssysteemgrenzen" #: diskdrake/interactive.pm:694 #, c-format msgid "This partition is not resizeable" msgstr "Deze partitie is niet in grootte aanpasbaar" #: diskdrake/interactive.pm:699 #, c-format msgid "All data on this partition should be backed-up" msgstr "" "Er zou een reservekopie gemaakt moeten worden van alle gegevens op deze " "partitie." #: diskdrake/interactive.pm:701 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Na het veranderen van de grootte van partitie %s, zullen alle gegevens op " "deze partitie verloren gaan" #: diskdrake/interactive.pm:706 #, c-format msgid "Choose the new size" msgstr "Kies de nieuwe grootte" #: diskdrake/interactive.pm:707 #, c-format msgid "New size in MB: " msgstr "Nieuwe grootte in MB: " #: diskdrake/interactive.pm:751 install_interactive.pm:194 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Om de data-integriteit na het aanpassen van de partitiegrootte(s)\n" "te garanderen, zal het bestandssysteem worden gecontroleerd\n" "de volgende keer dat u Windows(TM) opstart" #: diskdrake/interactive.pm:775 #, c-format msgid "Which disk do you want to move it to?" msgstr "Naar welke schijf wenst u het te verplaatsen?" #: diskdrake/interactive.pm:776 #, c-format msgid "Sector" msgstr "Sector" #: diskdrake/interactive.pm:777 #, c-format msgid "Which sector do you want to move it to?" msgstr "Naar welke sector wenst u het te verplaatsen?" #: diskdrake/interactive.pm:780 #, c-format msgid "Moving" msgstr "Verplaatsen..." #: diskdrake/interactive.pm:780 #, c-format msgid "Moving partition..." msgstr "Bezig met verplaatsen van partitie..." #: diskdrake/interactive.pm:802 #, c-format msgid "Choose an existing RAID to add to" msgstr "Kies een bestaande RAID om aan toe te voegen" #: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820 #, c-format msgid "new" msgstr "nieuw" #: diskdrake/interactive.pm:818 #, c-format msgid "Choose an existing LVM to add to" msgstr "Kies een bestaande LVM om aan toe te voegen" #: diskdrake/interactive.pm:824 #, c-format msgid "LVM name?" msgstr "Naam van de LVM?" #: diskdrake/interactive.pm:861 #, c-format msgid "This partition can't be used for loopback" msgstr "Deze partitie kan niet gebruikt worden voor loopback" #: diskdrake/interactive.pm:874 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:875 #, c-format msgid "Loopback file name: " msgstr "Loopback-bestandsnaam: " #: diskdrake/interactive.pm:880 #, c-format msgid "Give a file name" msgstr "Voer een bestandsnaam in" #: diskdrake/interactive.pm:883 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Loopback-bestand is al in gebruik, gelieve een ander te kiezen" #: diskdrake/interactive.pm:884 #, c-format msgid "File already exists. Use it?" msgstr "Het bestand bestaat al. Wenst u het te gebruiken?" #: diskdrake/interactive.pm:907 #, c-format msgid "Mount options" msgstr "Koppel-opties:" #: diskdrake/interactive.pm:914 #, c-format msgid "Various" msgstr "Diversen" #: diskdrake/interactive.pm:978 #, c-format msgid "device" msgstr "apparaat" #: diskdrake/interactive.pm:979 #, c-format msgid "level" msgstr "niveau" #: diskdrake/interactive.pm:980 #, c-format msgid "chunk size" msgstr "blok grootte" #: diskdrake/interactive.pm:996 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Voorzichtig: deze operatie is gevaarlijk." #: diskdrake/interactive.pm:1011 #, c-format msgid "What type of partitioning?" msgstr "Welk type partitionering?" #: diskdrake/interactive.pm:1027 #, c-format msgid "The package %s is needed. Install it?" msgstr "Pakket %s dient geïnstalleerd te worden. Wilt u het installeren?" #: diskdrake/interactive.pm:1056 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "U zal moeten herstarten voordat de aanpassing van kracht wordt" #: diskdrake/interactive.pm:1065 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Partitietabel van schijf %s wordt weggeschreven!" #: diskdrake/interactive.pm:1078 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Na het formatteren van partitie %s, zullen alle gegevens op deze partitie " "verloren zijn" #: diskdrake/interactive.pm:1095 #, c-format msgid "Move files to the new partition" msgstr "Bestanden naar de nieuwe partitie verplaatsen" #: diskdrake/interactive.pm:1095 #, c-format msgid "Hide files" msgstr "Bestanden verbergen" #: diskdrake/interactive.pm:1096 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Map %s bevat reeds gegevens\n" "(%s)" #: diskdrake/interactive.pm:1107 #, c-format msgid "Moving files to the new partition" msgstr "Bezig met verplaatsen van bestanden naar de nieuwe partitie" #: diskdrake/interactive.pm:1111 #, c-format msgid "Copying %s" msgstr "Bezig met kopiëren van %s" #: diskdrake/interactive.pm:1115 #, c-format msgid "Removing %s" msgstr "Bezig met verwijderen van %s" #: diskdrake/interactive.pm:1129 #, c-format msgid "partition %s is now known as %s" msgstr "partitie %s heet vanaf nu %s" #: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210 #, c-format msgid "Device: " msgstr "Apparaat: " #: diskdrake/interactive.pm:1151 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS schijfletter: %s (slechts een gok)\n" #: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163 #: diskdrake/interactive.pm:1229 #, c-format msgid "Type: " msgstr "Type: " #: diskdrake/interactive.pm:1159 install_steps_gtk.pm:339 #, c-format msgid "Name: " msgstr "Naam: " #: diskdrake/interactive.pm:1167 #, c-format msgid "Start: sector %s\n" msgstr "Start: sector %s\n" #: diskdrake/interactive.pm:1168 #, c-format msgid "Size: %s" msgstr "Grootte: %s" #: diskdrake/interactive.pm:1170 #, c-format msgid ", %s sectors" msgstr ", %s sectoren" #: diskdrake/interactive.pm:1172 #, c-format msgid "Cylinder %d to %d\n" msgstr "Cylinder %d tot %d\n" # juiste vertaling 'extent'? #: diskdrake/interactive.pm:1173 #, c-format msgid "Number of logical extents: %d" msgstr "Aantal logische bereiken: %d" #: diskdrake/interactive.pm:1174 #, c-format msgid "Formatted\n" msgstr "Geformatteerd\n" #: diskdrake/interactive.pm:1175 #, c-format msgid "Not formatted\n" msgstr "Niet geformatteerd\n" #: diskdrake/interactive.pm:1176 #, c-format msgid "Mounted\n" msgstr "Gekoppeld\n" #: diskdrake/interactive.pm:1177 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: diskdrake/interactive.pm:1179 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback-bestand(en):\n" " %s\n" #: diskdrake/interactive.pm:1180 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Standaard te starten partitie\n" " (om MS-DOS te booten, niet voor lilo)\n" #: diskdrake/interactive.pm:1182 #, c-format msgid "Level %s\n" msgstr "Niveau %s\n" #: diskdrake/interactive.pm:1183 #, c-format msgid "Chunk size %s\n" msgstr "Blok-grootte %s\n" #: diskdrake/interactive.pm:1184 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-schijven %s\n" #: diskdrake/interactive.pm:1186 #, c-format msgid "Loopback file name: %s" msgstr "Loopback bestandsnaam: %s" #: diskdrake/interactive.pm:1189 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "De kans is aanwezig dat deze\n" "partitie een stuurprogramma-partitie is.\n" "U kunt hem waarschijnlijk beter met\n" "rust laten.\n" #: diskdrake/interactive.pm:1192 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Deze speciale Bootstrap\n" "partitie is voor het\n" "multi-opstarten van uw systeem.\n" #: diskdrake/interactive.pm:1211 #, c-format msgid "Read-only" msgstr "Alleen-lezen" #: diskdrake/interactive.pm:1212 #, c-format msgid "Size: %s\n" msgstr "Grootte: %s\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Indeling: %s cylinders, %s koppen, %s sectoren\n" #: diskdrake/interactive.pm:1214 #, c-format msgid "Info: " msgstr "Info: " #: diskdrake/interactive.pm:1215 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-schijven %s\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "Partition table type: %s\n" msgstr "Partitietabel-type: %s\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "on channel %d id %d\n" msgstr "op kanaal %d id %d\n" #: diskdrake/interactive.pm:1250 #, c-format msgid "Filesystem encryption key" msgstr "Sleutel voor bestandssysteem-versleuteling" #: diskdrake/interactive.pm:1251 #, c-format msgid "Choose your filesystem encryption key" msgstr "Kies uw sleutel voor bestandssysteem-versleuteling" #: diskdrake/interactive.pm:1254 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Deze versleutelings-sleutel is te makkelijk (moet tenminste %d tekens lang " "zijn)" #: diskdrake/interactive.pm:1255 #, c-format msgid "The encryption keys do not match" msgstr "De versleuteling-sleutels kloppen niet met elkaar" #: diskdrake/interactive.pm:1258 network/netconnect.pm:972 #: standalone/drakconnect:393 #, c-format msgid "Encryption key" msgstr "Vercijferingssleutel" #: diskdrake/interactive.pm:1259 #, c-format msgid "Encryption key (again)" msgstr "versleutelings sleutel (nogmaals)" #: diskdrake/removable.pm:47 #, c-format msgid "Change type" msgstr "Type veranderen" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "Kan niet aanmelden met gebruikersnaam %s (verkeerd wachtwoord?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Domein-aanmeldingscontrole vereist" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Welke gebruikersnaam" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Een andere" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Voer uw gebruikersnaam, wachtwoord en domeinnaam in om toegang te krijgen " "tot deze host." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3591 #, c-format msgid "Username" msgstr "Gebruikersnaam" #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Domein" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Servers zoeken" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Nieuwe servers zoeken" #: do_pkgs.pm:21 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pakket %s dient geïnstalleerd te worden. Wilt u het installeren?" #: do_pkgs.pm:26 #, c-format msgid "Mandatory package %s is missing" msgstr "Verplicht pakket %s ontbreekt" #: do_pkgs.pm:143 #, c-format msgid "Installing packages..." msgstr "Bezig met installeren van pakketten..." #: do_pkgs.pm:217 #, c-format msgid "Removing packages..." msgstr "Verwijderen van pakketten..." #: fs.pm:409 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "inode-toegangstijden op dit bestandssysteem niet verversen\n" "(bijv. voor snellere toegang op de newsspool om newsservers te versnellen)." #: fs.pm:412 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Kan alleen expliciet gekoppeld worden (bijvoorbeeld\n" "de optie -a zorgt er niet voor dat het bestandssysteem gekoppeld wordt)." #: fs.pm:415 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Speciale character- of block-apparaten op het bestandssysteem niet " "interpreteren." #: fs.pm:417 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Het uitvoeren van binaire bestanden op het gekoppelde \n" "bestandssysteem niet toestaan. Deze optie kan nuttig zijn voor een server\n" "die binaire bestanden bevat voor andere architecturen dan zijn eigen." #: fs.pm:421 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "De bits set-user-identifier en set-group-identifier niet toestaan\n" "om effect te hebben. (Dit lijkt veilig, maar is in feite nogal onveilig als\n" "u suidperl(1) geïnstalleerd heeft.)" #: fs.pm:425 #, c-format msgid "Mount the file system read-only." msgstr "Het bestandssysteem alleen voor lezen koppelen" #: fs.pm:427 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "Alle I/O naar het bestandssysteem zou synchroon moeten gebeuren." #: fs.pm:431 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "Een gewone gebruiker toestaan het bestandssysteem te koppelen. De \n" "naam van de koppelende gebruiker wordt naar mtab geschreven zodat hij\n" " het bestandssysteem weer kan ontkoppelen. Deze optie impliceert de\n" "opties noexec, nosuid, and nodev (tenzij anders bepaald door volgende\n" "opties in de optieregel zoals user,exec,dev,suid )." #: fs.pm:439 #, c-format msgid "Give write access to ordinary users" msgstr "Schrijftoegang geven aan gewone gebruikers" #: fs.pm:441 #, c-format msgid "Give read-only access to ordinary users" msgstr "Allen-lezen-toegang geven aan gewone gebruikers" #: fs.pm:580 fs.pm:590 fs.pm:594 fs.pm:598 fs.pm:602 fs.pm:606 swap.pm:12 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatteren van %s mislukt" #: fs.pm:647 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Methode voor formatteren van %s in type %s onbekend" #: fs.pm:654 fs.pm:661 #, c-format msgid "Formatting partition %s" msgstr "Bezig met formatteren van partitie %s" #: fs.pm:658 #, c-format msgid "Creating and formatting file %s" msgstr "Bezig met aanmaken en formatteren van bestand %s" #: fs.pm:718 fs.pm:771 #, c-format msgid "Mounting partition %s" msgstr "Bezig met koppelen van partitie %s" #: fs.pm:719 fs.pm:772 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "het koppelen van partitie %s in map %s is mislukt" #: fs.pm:739 fs.pm:747 #, c-format msgid "Checking %s" msgstr "Bezig met controleren van %s" #: fs.pm:788 partition_table.pm:638 #, c-format msgid "error unmounting %s: %s" msgstr "fout bij ontkoppelen %s: %s" #: fs.pm:820 #, c-format msgid "Enabling swap partition %s" msgstr "Bezig met inschakelen van virtueel geheugen-partitie %s" #: fsedit.pm:21 #, c-format msgid "simple" msgstr "eenvoudig" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "met /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "server" #: fsedit.pm:254 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Niet in staat de partitietabel van apparaat %s niet lezen, ze is te " "corrupt. :(\n" "Ik kan proberen door te gaan en de slechte partities verwijderen\n" "(ALLE GEGEVENS zullen worden gewist!).\n" "De andere mogelijkheid is om DrakX de de partitietabel niet te laten " "aanpassen.\n" "(de fout is %s)\n" "\n" "Gaat u ermee akkoord dat alle partities verloren gaan?\n" #: fsedit.pm:513 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "U kunt JFS niet gebruiken op een partitie kleiner dan 16MB" #: fsedit.pm:514 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "U kunt ReiserFS niet gebruiken op een partitie kleiner dan 32MB" #: fsedit.pm:533 #, c-format msgid "Mount points must begin with a leading /" msgstr "Koppelpunten moeten beginnen met een /" #: fsedit.pm:534 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Koppelpuntnamen kunnen slechts alfanumerieke tekens bevatten" #: fsedit.pm:535 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Er is al een partitie met als koppelpunt %s\n" #: fsedit.pm:537 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "U heeft een software RAID partitie als root (/) geselecteerd.\n" "Geen enkele opstartlader kan dit aan zonder een /boot partitie.\n" "Vergeet dus niet om ook een /boot-partitie toe te voegen." #: fsedit.pm:540 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "U kunt geen LVM schijf voor koppelpunt %s gebruiken" #: fsedit.pm:542 #, fuzzy, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "U heeft een software RAID partitie als root (/) geselecteerd.\n" "Geen enkele opstartlader kan dit aan zonder een /boot partitie.\n" "Vergeet dus niet om ook een /boot-partitie toe te voegen." #: fsedit.pm:545 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" "Het installeren van lilo is wellicht niet mogelijk (omdat lilo geen logisch " "volume op meerdere fysieke volumes aankan)" #: fsedit.pm:548 fsedit.pm:550 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Deze map zou binnen het root-bestandssysteem moeten blijven" #: fsedit.pm:552 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "U heeft een echt bestandssysteem (ext2/ext3, reiserfs, xfs of jfs) voor dit " "koppelpunt nodig\n" #: fsedit.pm:554 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "U kunt geen versleuteld bestandssysteem voor koppelpunt %s gebruiken" #: fsedit.pm:615 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Niet voldoende vrije ruimte voor automatische toewijzing" #: fsedit.pm:617 #, c-format msgid "Nothing to do" msgstr "Niets meer te doen" #: fsedit.pm:713 #, c-format msgid "Error opening %s for writing: %s" msgstr "" "Er is een fout opgetreden bij het openen van %s voor schrijfbewerking: %s" #: harddrake/data.pm:53 #, c-format msgid "Floppy" msgstr "Diskette" #: harddrake/data.pm:54 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:55 #, c-format msgid "Disk" msgstr "Schijf" #: harddrake/data.pm:56 #, c-format msgid "CDROM" msgstr "CD-ROM" #: harddrake/data.pm:57 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD-branders" #: harddrake/data.pm:58 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:59 standalone/drakbackup:2116 #, c-format msgid "Tape" msgstr "Band" #: harddrake/data.pm:60 #, c-format msgid "Videocard" msgstr "Videokaart" #: harddrake/data.pm:61 #, c-format msgid "Tvcard" msgstr "TV-kaart" #: harddrake/data.pm:62 #, c-format msgid "Other MultiMedia devices" msgstr "Andere multimedia-apparaten" #: harddrake/data.pm:63 #, c-format msgid "Soundcard" msgstr "Geluidskaart" #: harddrake/data.pm:64 #, c-format msgid "Webcam" msgstr "Webcam" #: harddrake/data.pm:68 #, c-format msgid "Processors" msgstr "Processoren" #: harddrake/data.pm:69 #, c-format msgid "ISDN adapters" msgstr "ISDN-adapters" #: harddrake/data.pm:70 #, c-format msgid "Ethernetcard" msgstr "Ethernetkaart" #: harddrake/data.pm:78 network/netconnect.pm:452 standalone/drakconnect:272 #: standalone/drakconnect:292 standalone/drakconnect:472 #: standalone/drakconnect:473 standalone/drakconnect:576 #, c-format msgid "Modem" msgstr "Modem" #: harddrake/data.pm:79 #, c-format msgid "ADSL adapters" msgstr "ADSL-adapters" #: harddrake/data.pm:81 #, fuzzy, c-format msgid "AGP controllers" msgstr "USB-controllers" #: harddrake/data.pm:82 #, c-format msgid "Bridges and system controllers" msgstr "Bridges en systeemcontrollers" #: harddrake/data.pm:83 help.pm:203 help.pm:991 #: install_steps_interactive.pm:940 printer/printerdrake.pm:687 #: printer/printerdrake.pm:4175 #, c-format msgid "Printer" msgstr "Printer" #: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:933 #, c-format msgid "Mouse" msgstr "Muis" #: harddrake/data.pm:90 #, c-format msgid "Joystick" msgstr "Pretpookje" #: harddrake/data.pm:92 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA-controllers" #: harddrake/data.pm:94 #, c-format msgid "Firewire controllers" msgstr "Firewire-controllers" #: harddrake/data.pm:95 #, c-format msgid "SCSI controllers" msgstr "SCSI-controllers" #: harddrake/data.pm:96 #, c-format msgid "USB controllers" msgstr "USB-controllers" #: harddrake/data.pm:97 #, c-format msgid "SMBus controllers" msgstr "SMBus-controllers" #: harddrake/data.pm:98 #, c-format msgid "Scanner" msgstr "Scanner" #: harddrake/data.pm:100 standalone/harddrake2:319 #, c-format msgid "Unknown/Others" msgstr "Onbekend/Overige" #: harddrake/data.pm:114 #, c-format msgid "cpu # " msgstr "CVE # " #: harddrake/sound.pm:150 standalone/drakconnect:169 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Even geduld... bezig met toepassen van de configuratie" #: harddrake/sound.pm:186 #, c-format msgid "No alternative driver" msgstr "Geen alternatief stuurprogramma" #: harddrake/sound.pm:187 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Er is geen alternatief OSS/ALSA-stuurprogramma bekend voor uw geluidskaart(%" "s) welke momenteel \"%s\" gebruikt" #: harddrake/sound.pm:193 #, c-format msgid "Sound configuration" msgstr "Geluidsconfiguratie" #: harddrake/sound.pm:195 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Hier kunt u een alternatief stuurprogramma selecteren (OSS of ALSA) voor uw " "geluidskaart (%s)." #: harddrake/sound.pm:197 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Uw kaart gebruikt momenteel het %s\"%s\"-stuurprogramma (standaard " "stuurprogramma voor uw kaart is \"%s\")" #: harddrake/sound.pm:199 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) was de eerste geluidsarchitectuur (API) voor Linux. " "Het is een besturingssysteem-onafhankelijke geluids-API (het is beschikbaar " "op de meeste UNIX-systemen) maar het is een erg simpele en beperkte API.\n" "Daarbij komt dat alle OSS-stuurprogramma's het wiel opnieuw uitvinden.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is een gemodulariseerde " "architectuur welke een behoorlijk groot scala aan ISA-, USB- en PCI-kaarten " "ondersteunt.\n" "\n" "Tevens biedt het een interface op veel hoger niveau dan OSS.\n" "\n" "Om van ALSA gebruik te maken, kan men twee dingen doen:\n" "- gebruik maken van de compatibiliteits-API voor het oude OSS\n" "- gebruik maken van de nieuwe ALSA-API welke veel verbeterde " "functionaliteit kent maar vereist dat u de ALSA-bibliotheek gebruikt.\n" #: harddrake/sound.pm:213 harddrake/sound.pm:293 standalone/drakups:134 #, c-format msgid "Driver:" msgstr "Stuurprogramma:" #: harddrake/sound.pm:218 #, c-format msgid "Trouble shooting" msgstr "Probleemaanpak" #: harddrake/sound.pm:226 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "Het oude \"%s\"-stuurprogramma staat op de zwarte lijst.\n" "\n" "Er is gerapporteerd dat het kernel-oopses veroorzaakt bij\n" "het uitladen.\n" "\n" "Het nieuwe \"%s\"-stuurprogramma zal slechts gebruikt worden\n" "bij de volgende \"bootstrap\"." #: harddrake/sound.pm:234 #, c-format msgid "No open source driver" msgstr "Geen stuurprogramma met vrije broncode" #: harddrake/sound.pm:235 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Er is geen vrij stuurprogramma beschikbaar voor uw geluidskaart (%s), maar " "er is een fabrikantsgebonden stuurprogramma op \"%s\"." #: harddrake/sound.pm:238 #, c-format msgid "No known driver" msgstr "Geen stuurprogramma bekend" #: harddrake/sound.pm:239 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Er is geen stuurprogramma bekend voor uw geluidskaart (%s)" #: harddrake/sound.pm:243 #, c-format msgid "Unknown driver" msgstr "Onbekend stuurprogramma" #: harddrake/sound.pm:244 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" "Er is een fout opgetreden: Het stuurprogramma \"%s\" voor uw geluidskaart " "staat niet in de lijst" #: harddrake/sound.pm:257 #, c-format msgid "Sound trouble shooting" msgstr "Geluidsproblemen aanpakken" #: harddrake/sound.pm:258 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "De klassieke test voor problemen met geluid is het uitvoeren van de\n" "volgende opdrachten:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" vertelt u welk stuurprogramma uw kaart\n" "normaal gesproken gebruikt\n" "\n" "- \"grep sound-slot /etc/modules.conf\" vertelt u welk stuurprogramma uw " "kaart\n" "momenteel gebruikt\n" "\n" "- \"/sbin/lsmod\" laat u nagaan of de betreffende module (stuurprogramma)\n" "is geladen of niet\n" "\n" "- \"/sbin/chkconfig --list sound\" en \"/sbin/chkconfig --list alsa\" " "vertelt\n" "u of de sound- en alsa-diensten zijn geconfigureerd om te starten op\n" "initniveau 3\n" "\n" "- \"aumix -q\" vertelt u of het geluid is gedempt of niet\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" vertelt u welk programma de geluidskaart " "gebruikt.\n" #: harddrake/sound.pm:284 #, c-format msgid "Let me pick any driver" msgstr "Laat de computer een stuurprogramma uitzoeken" #: harddrake/sound.pm:287 #, c-format msgid "Choosing an arbitrary driver" msgstr "Kiezen van willekeurig stuurprogramma" #: harddrake/sound.pm:288 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Indien u zeker denkt te weten welk stuurprogramma het juiste is voor uw " "kaart\n" "dan kunt u er één kiezen uit bovenstaande lijst.\n" "\n" "Het huidige stuurprogramma voor uw \"%s\" geluidskaart is \"%s\" " #: harddrake/v4l.pm:14 harddrake/v4l.pm:66 #, c-format msgid "Auto-detect" msgstr "Automatisch bespeuren" #: harddrake/v4l.pm:67 harddrake/v4l.pm:219 #, c-format msgid "Unknown|Generic" msgstr "Onbekend|Algemeen" #: harddrake/v4l.pm:100 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Onbekend|CPH05X (bt878) [vele uitvoeringen]" #: harddrake/v4l.pm:101 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Onbekend|CPH06X (bt878) [vele uitvoeringen]" #: harddrake/v4l.pm:245 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Voor de meeste modere TV-kaarten worden de juiste parameters automatisch " "door de bttv module van de GNU/Linux kernel gevonden.\n" "Indien uw kaart niet goed is herkend, kunt u de juiste tuner en kaart-type " "hier handmatig aangeven. Selecteer zonodig de vlaggen voor uw TV-kaart." #: harddrake/v4l.pm:248 #, c-format msgid "Card model:" msgstr "Kaartmodel:" #: harddrake/v4l.pm:249 #, c-format msgid "Tuner type:" msgstr "Tuner type :" #: harddrake/v4l.pm:250 #, c-format msgid "Number of capture buffers:" msgstr "Aantal opnamebuffers:" #: harddrake/v4l.pm:250 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "aantal opnamebuffers voor mmap-opname:" #: harddrake/v4l.pm:252 #, c-format msgid "PLL setting:" msgstr "PLL instelling:" #: harddrake/v4l.pm:253 #, c-format msgid "Radio support:" msgstr "Radio ondersteuning:" #: harddrake/v4l.pm:253 #, c-format msgid "enable radio support" msgstr "activeer radio ondersteuning" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n" "will reboot your computer." msgstr "" "Voordat u verdergaat dient u eerst de voorwaarden in de licentie\n" "aandachtig te lezen. Zij beslaan de gehele Mandrakelinux distributie.\n" "Indien u akkoord gaat met alle voorwaarden erin kruist u het\n" "\"%s\"-vakje aan. Zoniet, dan zal het klikken van de \"%s\"-knop\n" "uw computer herstarten." #: help.pm:14 install_steps_gtk.pm:596 install_steps_interactive.pm:88 #: install_steps_interactive.pm:697 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "Accepteren" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user who\n" "can automatically log into the system when the computer boots up. If you\n" "are interested in that feature (and do not care much about local security),\n" "choose the desired user and window manager, then click \"%s\". If you are\n" "not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux is een multi-gebruikerssysteem, dit betekent dat iedere " "gebruiker \n" "haar eigen voorkeuren, bestanden enzovoort kan hebben. U kunt de \n" "''Beginnershandleiding'' lezen om hierover meer te weten te komen. Maar \n" "in tegenstelling tot \"root\", de beheerder, zullen de gebruikers die\n" "u hier toevoegt geen recht hebben om iets te veranderen behalve hun eigen \n" "bestanden en hun eigen configuratie, waarmee het systeem beschermd wordt \n" "tegen onbedoelde danwel kwaadwillende veranderingen die het systeem als\n" "geheel beïnvloeden. U zult tenminste één algemene gebruiker voor \n" "uzelf aan moeten maken. Dit account behoort u voor de dagelijkse routine\n" "te gebruiken. Alhoewel het erg praktisch is om iedere dag als \"root\" \n" "aan te melden, om van alles en nog wat te doen, kan het ook erg gevaarlijk\n" "zijn! De kleinste vergissing kan ervoor zorgen dat uw hele systeem niet\n" "meer werkt. Wanneer u een grote vergissing maakt als een gewone\n" "gebruiker, zou u in het ergste geval sommige gegevens kunnen\n" "verliezen, maar niet het hele systeem beschadigen.\n" "\n" "Het eerste veld is voor uw echte naam in. Dit is uiteraard niet verplicht -\n" "u kunt alles invoeren wat u wilt. DrakX neemt dan het eerste woord dat u\n" "had ingevuld en brengt het over naar het veld \"%s\". Met deze\n" "naam kan de betreffende gebruiker zich aanmelden op het systeem. \n" "Desgewenst kunt u de voorgestelde gebruikersnaam veranderen.\n" "De volgende stap is het invoeren van een wachtwoord. Het \n" "wachtwoord van een (gewone) gebruiker zonder privileges is niet zo \n" "cruciaal als dat van de \"root\"-gebruiker vanuit veiligheidsperspectief, \n" "maar dat is geen reden om het te verwaarlozen door het leeg te laten of het\n" "te eenvoudig te maken: tenslotte staan uw bestanden op het spel.\n" "\n" "Wanneer u klikt op \"%s\", dan kunt u daarna andere \n" "gebruikers toevoegen. Voeg een gebruiker toe voor elk van uw \n" "bekenden, uw vader of uw zus bijvoorbeeld. Als u klaar bent met het \n" "toevoegen van gebruikers, klik dan op \"%s\".\n" "\n" "Klikken op de \"%s\"-knop stelt u in staat om de standaard\n" "\"shell\" voor een gebruiker te veranderen (standaard is dit bash).\n" "\n" "Wanneer u alle gebruikers hebt toegevoegd, dan wordt u gevraagd een \n" "gebruiker te kiezen die zich vanzelf aanmeldt wanneer de computer opstart.\n" "Indien u geïnteresseerd bent in deze functie (en lokale beveiliging niet\n" "zo belangrijk vindt), kies dan de gewenste gebruiker en werkomgeving en\n" "klik vervolgens op \"%s\". Wenst u deze functie niet, wis dan\n" "het kruisje bij het vakje \"%s\"." #: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005 #: install_steps_gtk.pm:275 interactive.pm:403 interactive/newt.pm:308 #: network/netconnect.pm:262 network/tools.pm:206 printer/printerdrake.pm:3090 #: standalone/drakTermServ:408 standalone/drakbackup:4199 #: standalone/drakbackup:4229 standalone/drakbackup:4251 ugtk2.pm:510 #, c-format msgid "Next" msgstr "Volgende" #: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768 #: interactive.pm:371 #, c-format msgid "Advanced" msgstr "Geavanceerd" #: help.pm:55 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Hier zijn de bestaande Linuxpartities afgebeeld die op uw harde\n" "schijf gevonden zijn. U kunt de keuzes die gemaakt zijn door de wizard\n" "behouden, ze zijn goed voor de meeste doorsnee installaties.\n" "Indien u veranderingen maakt, moet u in ieder geval een root partitie\n" "(\"/\") definiëren. Kies een partitie niet te klein, anders zult u niet in\n" "staat zijn genoeg software te installeren. Indien u uw gegevens op een\n" "aparte partitie wilt bewaren, dient u tevens een \"/home\" partitie te\n" "creëren (alleen mogelijk wanneer er meer dan één Linux partitie\n" "beschikbaar is).\n" "\n" "Elke partitie is als volgt afgebeeld: \"Naam\", \"Capaciteit\".\n" "\n" "\"Naam\" is als volgt opgebouwd: \"type harde schijf\",\n" "\"harde schijf-teken\", \"partitienummer\" (bijvoorbeeld \"hda1\").\n" "\n" "\"Type harde schijf\" is \"hd\" als uw harde schijf van het IDE-type is en\n" "\"sd\" wanneer deze van het SCSI-type is.\n" "\n" "\"Harde schijf-teken\" is altijd een letter na \"hd\" of \"sd\". Voor IDE\n" "harde schijven:\n" "\n" " * \"a\" betekent \"master harde schijf op de primaire IDE controller\",\n" "\n" " * \"b\" betekent \"slave harde schijf op de primaire IDE controller\",\n" "\n" " * \"c\" betekent \"master harde schijf op de secundaire IDE controller\",\n" "\n" " * \"d\" betekent \"slave harde schijf op de secundaire IDE controller\".\n" "\n" "Bij SCSI harde schijven betekent een \"a\" \"laagste SCSI ID\",\n" "een \"b\" \"het op één na laagste SCSI ID\", etc." #: help.pm:86 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the correct CD as required." msgstr "" "De Mandrakelinux-installatie is verdeeld over meerdere CD-ROMs. Als een \n" "geselecteerd pakket te vinden is op een andere CD-ROM, zal het \n" "installatieprogramma de huidige CD uitwerpen en u zonodig vragen om de\n" "correcte CD in te leggen." #: help.pm:91 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrakelinux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrakelinux sorts packages groups in four categories. You can\n" "mix and match applications from the various categories, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' category installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups that are in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Het is nu tijd om te bepalen welke programma's u op uw systeem\n" "wenst te installeren. Er zijn duizenden pakketten beschikbaar voor Mandrake\n" "Linux, en om het overzichtelijker te maken zijn de pakketten in groepen\n" "van vergelijkbare toepassingen geplaatst.\n" "\n" "Pakketten zijn samengebracht in groepen die corresponderen met een\n" "bepaald gebruik van uw computer. Mandrakelinux heeft vier voorgedefiniëerde\n" "installaties beschikbaar. U kunt deze installatieklasses zien als \n" "categorieën voor de diverse pakketten. U kunt de toepassingen uit de\n" "verschillende categorieën uitkiezen en samenvoegen naar eigen inzicht,\n" "zodat een ``Werkstation''-installatie nog steeds toepassingen geïnstalleerd\n" "kan hebben uit de ``Ontwikkeling''-categorie.\n" "* \"%s\": indien u van plan bent uw computer als werkstation te\n" "gaan gebruiken, selecteer dan één of meer van de groepen in de\n" "werkstation-categorie.\n" "\n" "* \"%s\": indien u van plan bent om uw computer voor programmeren\n" "te gebruiken, kiest u de gewenste groepen uit die categorie.\n" "\n" "* \"%s\": als de computer bestemd is voor server-doeleinden, dan\n" "kunt u aangeven welke van de meest voorkomende diensten u op uw\n" "computer wilt installeren.\n" "\n" "* \"%s omgeving\": dit is waar u uw voorkeur voor een grafische\n" "omgeving kunt aangeven. Tenminste één moet geselecteerd zijn als u een\n" "grafische werkomgeving wilt hebben.\n" "\n" "Bij het bewegen van de muispijl boven een groepnaam zal er een korte " "verklarende\n" "tekst over die groep getoond worden. Als u alle groepen deselecteert tijdens " "het\n" "uitvoeren van een reguliere installatie (in tegenstelling tot een " "opwaardering), dan\n" "zal een dialoogvenster verschijnen dat verscheidene opties voor een " "minimale\n" "installatie voorstelt:\n" " * \"%s\": installeert zo min mogelijk pakketten met behoud van een werkende " "grafische werkomgeving;\n" " \n" " * \"%s\" installeert het basissysteem plus algemene\n" "hulpprogramma's en hun documentatie. Deze installatie is geschikt om een\n" "server mee in te richten.\n" "\n" " * \"%s\" zal het absolute minimum installeren\n" "dat nodig is om een werkend Linux-systeem te verkrijgen. Met deze " "installatie\n" "zult u slechts een opdrachtregelinterface hebben.\n" "Deze installatie is ongeveer 65 MB groot.\n" "\n" "U kunt het \"%s\"-vakje selecteren, welke nuttig is als\n" "u bekend bent met de aangeboden pakketten of indien u totale controle wenst\n" "over wat er geïnstalleerd zal worden.\n" "\n" "In het geval dat u de installatie in \"%s\"-modus heeft gestart, kunt u\n" "alle groepen deselecteren om te voorkomen dat er nieuwe pakketten " "geïnstalleerd\n" "worden. Dit is nuttig bij het repareren of het vernieuwen van een bestaand " "systeem." #: help.pm:137 #, c-format msgid "Workstation" msgstr "Werkstation" #: help.pm:137 #, c-format msgid "Development" msgstr "Ontwikkeling" #: help.pm:137 #, c-format msgid "Graphical Environment" msgstr "Grafische omgeving" #: help.pm:137 install_steps_interactive.pm:559 #, c-format msgid "With X" msgstr "Met X" #: help.pm:137 #, c-format msgid "With basic documentation" msgstr "Met basis-documentatie" #: help.pm:137 #, c-format msgid "Truly minimal install" msgstr "Zeer minimale installatie" #: help.pm:137 install_steps_gtk.pm:270 install_steps_interactive.pm:605 #, c-format msgid "Individual package selection" msgstr "Individuele pakketselectie" #: help.pm:137 help.pm:602 #, c-format msgid "Upgrade" msgstr "Opwaardering" #: help.pm:140 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each them such\n" "that installation of one package requires that some other program is also\n" "required to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "Afhankelijk van uw keus om al dan niet individuele pakketten\n" "te selecteren, zal het installatieprogramma u een boom tonen die alle\n" "pakketten bevat, geclassificeerd in groepen en subgroepen. Terwijl u door\n" "de boom bladert, kunt u gehele groepen, subgroepen of individuele pakketten\n" "selecteren.\n" "\n" "Wanneer u een pakket in de boom selecteert, verschijnt een beschrijving\n" "aan de rechterkant om u te informeren over het doel van het pakket.\n" "\n" "!! Als een server-pakket geselecteerd is, ofwel omdat u dat pakket\n" "specifiek gekozen heeft ofwel omdat het onderdeel is van een hele groep\n" "pakketten, zal u gevraagd worden om te bevestigen dat u deze servers echt\n" "wilt installeren. Onder Mandrakelinux worden alle geïnstalleerde servers\n" "standaard ingeschakeld tijdens het opstarten. Zelfs wanneer zij veilig\n" "zijn en geen bekende beveiligingsgebreken hadden op het moment dat de\n" "distributie werd uitgebracht, kan het gebeuren dat beveiligingsfouten\n" "ontdekt worden nadat deze versie van Mandrakelinux afgemaakt werd.\n" "Indien u niet weet wat een bepaalde dienst geacht wordt te doen of waarom\n" "deze geïnstalleerd wordt, klikt u dan \"%s\". Klikken op \"%s\" zal\n" "de getoonde diensten installeren en ze zullen automatisch worden\n" "ingeschakeld tijdens het opstarten van de computer. !!\n" "\n" "De \"%s\"-optie schakelt het\n" "waarschuwingsvenster uit dat verschijnt wanneer het installatieprogramma\n" "automatisch een pakket selecteert om een afhankelijkheid te vervullen.\n" "Sommige pakketten hebben relaties met elkaar zodat de installatie van\n" "het ene pakket vereist dan een ander programma reeds is geïnstalleerd.Het " "installatieprogramma kan uitzoeken welke pakketten benodigd zijn\n" "om een afhankelijkheid te vervullen om de installatie succesvol te\n" "voltooien.\n" "\n" "Het kleine diskette-pictogram onderaan de lijst stelt u in staat de\n" "pakketten-lijst te laden die tijdens een eerdere installatie gekozen was.\n" "Als u klikt op dit pictogram zal u gevraagd worden een diskette in het\n" "diskettestation te plaatsen welke gecreëerd was aan het eind van een\n" "andere installatie. Zie de tweede tip van de laatste stap over hoe u een\n" "dergelijke diskette aanmaakt." #: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:420 #: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:219 #: ugtk2.pm:1074 wizards.pm:156 #, c-format msgid "No" msgstr "Nee" #: help.pm:172 help.pm:301 help.pm:457 install_any.pm:420 interactive.pm:149 #: modules/interactive.pm:71 printer/printerdrake.pm:607 standalone/drakgw:288 #: standalone/drakgw:289 standalone/drakgw:297 standalone/drakgw:307 #: standalone/harddrake2:218 ugtk2.pm:1074 wizards.pm:156 #, c-format msgid "Yes" msgstr "Ja" #: help.pm:172 #, c-format msgid "Automatic dependencies" msgstr "Automatische afhankelijkheden" #: help.pm:175 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrakelinux will attempt to auto-detect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "About Winmodem Connection. Winmodems are special integrated low-end modems\n" "that require additional software to work compared to Normal modems. Some of\n" "those modems actually work under Mandrakelinux, some others do not. You\n" "can consult the list of supported modems at LinModems.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Het is nu mogelijk om uw internet- of netwerkverbinding in te stellen.\n" "Indien u wenst uw computer aan het Internet of aan een lokaal netwerk te\n" "verbinden, klik dan op \"%s\". Mandrakelinux zal trachten om\n" "netwerkapparaten en modems automatisch te bespeuren. Als deze bespeuring\n" "mislukt, deselecteer dan het \"%s\"-vakje. \n" "U kunt ook besluiten het netwerk niet te configureren of het later pas\n" "te doen; in dat geval brengt de \"%s\"-knop u naar de volgende stap.\n" "\n" "Bij het configureren van uw netwerk zijn de volgende verbindingsopties\n" "beschikbaar: conventionele modem, ISDN-adapter, ADSL-verbinding, kabelmodem\n" "en tenslotte een eenvoudige LAN-verbinding (Ethernet).\n" "\n" "Wij zullen hier niet tot in detail ingaan op elke configuratie. Zorgt u er\n" "gewoon voor dat u alle instellingen van uw internetaanbieder of\n" "systeembeheerder, zoals het IP-adres, standaard gateway, DNS-servers etc.\n" "bij de hand heeft.\n" "\n" "Wat betreft Winmodem-verbindingen: Winmodems zijn speciale geïntegreerde \n" "eenvoudige modems die extra software vereisen om te kunnen werken, in \n" "vergelijking met normale modems. Sommige van deze modems kunnen " "functioneren\n" "onder Mandrakelinux, sommige andere niet. U kunt de lijst van ondersteunde\n" "modems raadplegen op de LinModems-webpagina.\n" "\n" "U kunt het hoofdstuk over internetverbindingen in het ``Beginnershandboek''\n" "raadplegen voor details over de instellingen, of gewoon wachten\n" "totdat uw systeem geïnstalleerd is en dan het daarin beschreven\n" "programma gebruiken om uw verbinding in te stellen." #: help.pm:197 #, c-format msgid "Use auto detection" msgstr "Automatische bespeuring" #: help.pm:200 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" "\"%s\": klikken op de \"%s\"-knop zal de printerconfiguratie-\n" "wizard openen. Raadpleeg het overeenkomstige hoofdstuk uit de ``Beginners-\n" "handleiding'' voor meer informatie over het instellen van een nieuwe " "printer.\n" "De daar getoonde interface lijkt op degene gebruikt tijdens de installatie." #: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:646 #: standalone/drakbackup:2406 standalone/drakbackup:2414 #: standalone/drakbackup:2422 standalone/drakbackup:2430 #, c-format msgid "Configure" msgstr "Configureren" #: help.pm:206 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "In dit dialoogvenster kunt u kiezen welke diensten u wenst te starten\n" "tijdens de opstartfase van uw computer.\n" "\n" "DrakX somt alle diensten op die beschikbaar zijn in de huidige\n" "installatie. Kijk ze aandachtig na en de-selecteer degenen die niet altijd\n" "nodig zijn bij het opstarten.\n" "\n" "Een korte verklarende tekst wordt gegeven over een dienst bij de selectie\n" "ervan. Wanneer u niet zeker bent of een dienst nuttig is of niet,\n" "dan is het veiliger om de standaardinstelling over te nemen.\n" "\n" "!! Wees vooral voorzichtig in deze stap als u uw machine als server \n" "wilt gebruiken: u zult waarschijnlijk de diensten die u niet nodig heeft " "niet\n" "willen starten. Onthoudt alstublieft dat een aantal diensten riskant kunnen\n" "zijn indien ze geactiveerd zijn op een server. In het algemeen geldt: kies\n" "alleen de diensten die u echt nodig heeft.\n" "!!" #: help.pm:224 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can be used by\n" "other machines on your local network as well." msgstr "" "GNU/Linux houdt de tijd bij in GMT (Greenwich Mean Time) en vertaalt\n" "het naar lokale tijd volgens de tijdzone die u geselecteerd heeft. Als\n" "de klok op uw moederbord op lokale tijd is ingesteld, dan kunt u dit\n" "deactiveren door \"%s\" te deselecteren,\n" "hetgeen GNU/Linux laat weten dat de systeemklok en hardwareklok op\n" "dezelfde tijdzone staan. Dit is nuttig wanneer er op de computer nog\n" "een ander besturingssysteem staat zoals Windows.\n" "\n" "De \"%s\"-optie zal de klok automatisch\n" "bijstellen door verbinding te maken met een tijdsserver op internet.\n" "U dient een werkende internetverbinding hebben voordat deze functie\n" "werkt. Het is het beste om een tijdserver te kiezen die dichtbij is.\n" "Deze optie zorgt er tevens voor dat er een tijdserver op uw computer\n" "wordt geïnstalleerd die gebruikt kan worden door andere computers\n" "op uw lokale netwerk." #: help.pm:235 install_steps_interactive.pm:835 #, c-format msgid "Hardware clock set to GMT" msgstr "Hardware-klok ingesteld op GMT" #: help.pm:235 #, c-format msgid "Automatic time synchronization" msgstr "Automatische tijdssynchronisatie" #: help.pm:238 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you are asked to choose the server that\n" "best suits your needs." msgstr "" "Grafische kaart\n" "\n" " Het installatieprogramma kan normaal gesproken de grafische kaart\n" "in uw computer automatisch bespeuren en configureren. Mocht dit niet\n" "het geval zijn, dan kunt u uit deze lijst de kaart kiezen die u\n" "daadwerkelijk heeft.\n" "\n" " In het geval dat er meerdere servers voor uw kaart beschikbaar zijn,\n" "met of zonder 3D-versnelling, dan wordt u voorgesteld de server te kiezen\n" "die het best bij uw omstandigheden past." #: help.pm:249 #, fuzzy, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you are asked to choose the server that\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "X (voor X Window System) is het hart van de grafische interface van GNU/" "Linux\n" "waarvan alle grafische omgevingen (KDE, GNOME, AfterStep, WindowMaker, " "etc.)\n" "die bij Mandrakelinux worden geleverd, afhankelijk zijn.\n" "\n" "U krijgt een lijst te zien van verschillende parameters die u kunt " "aanpassen\n" "om een optimale grafische weergave te verkrijgen:\n" "Grafische kaart\n" "\n" " Het installatieprogramma bespeurt normaal gesproken automatisch de \n" "grafische kaart in uw computer en configureert deze. Als dit niet het \n" "geval is, kunt u uit deze lijst de kaart kiezen die u daadwerkelijk heeft.\n" "\n" " In het geval dat er verschillende X-servers zijn voor uw kaart, met of\n" "zonder 3D-versnelling, dan wordt u voorgesteld om de server te kiezen die\n" "het beste bij uw omstandigheden past.\n" "\n" "\n" "\n" "Beeldscherm\n" "\n" " Het installatieprogramma kan normaal gesproken het aangesloten\n" "beeldscherm automatisch bespeuren en configureren. Als dit niet het\n" "geval is, dan kunt u uit deze lijst het beeldscherm kiezen dat u\n" "daadwerkelijk bezit.\n" "\n" "\n" "\n" "Resolutie\n" "\n" " U kunt hier de resolutie en kleurdiepte kiezen uit degenen die\n" "beschikbaar zijn voor uw apparatuur. Kies degene die het best bij uw\n" "omstandigheden past (u kunt dit na installatie evengoed wijzigen). Een\n" "voorbeeld van de gekozen configuratie wordt op het scherm getoond.\n" "\n" "\n" "\n" "Testen\n" "\n" " Het systeem zal trachten een grafisch scherm te openen in de gewenste\n" "resolutie. Wanneer u het bericht tijdens de test kunt zien en \"%s\"\n" "antwoordt, dan gaat DrakX door naar de volgende stap. Als u het bericht\n" "niet kunt zien, dan betekent dat dat een gedeelte van de gevonden\n" "configuratie niet klopt en zal de test automatisch na 12 seconden eindigen,\n" "waarmee u terugkomt in het menu. Pas de instellingen aan totdat u " "eencorrecte grafische weergave krijgt.\n" "\n" "\n" "\n" "Opties\n" "\n" " Hier kunt u kiezen of u uw computer automatisch wilt laten omschakelen\n" "naar een grafische interface bij het opstarten. Vanzelfsprekend zult u\n" "\"%s\" willen aankruisen als uw computer gaat functioneren als server, of\n" "als u het niet gedaan kreeg het beeldscherm goed te configureren." #: help.pm:304 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "Monitor\n" "\n" " Het installatieprogramma kan normaal gesproken de aangesloten monitor\n" "automatisch bespeuren en configureren. Als dit niet correct is, dan kunt u\n" "uit deze lijst de monitor kiezen die werkelijk aan uw computer verbonden is." #: help.pm:311 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Resolutie\n" "\n" " U kunt hier de resolutie en kleurdiepte kiezen uit degenen die\n" "beschikbaar zijn voor uw apparatuur. Kies degene die het best bij uw\n" "omstandigheden past (u kunt dit na installatie evengoed wijzigen). Een\n" "voorbeeld van de gekozen configuratie wordt op het scherm getoond." #: help.pm:319 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you are asked to choose the server that best\n" "suits your needs." msgstr "" "In het geval dat er verschillende servers beschikbaar zijn voor uw kaart,\n" "met of zonder 3D-versnelling, dan wordt u de keuze geboden voor de server\n" "die het beste bij uw omstandigheden past." #: help.pm:324 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "Opties\n" "\n" "Hier kunt u kiezen of u wilt dat uw computer automatisch naar een grafische\n" "interface omschakelt bij het opstarten. Vanzelfsprekend wilt\n" "u \"%s\" aankruisen als uw machine als server moet dienen, of\n" "als u er niet in slaagde het beeld te configureren." #: help.pm:332 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you have previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended.. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "Op dit punt diet u te kiezen waar op uw harde schijf u uw Mandrakelinux\n" "besturingssysteem wilt installeren. Als uw harde schijf leeg is of als een\n" "ander besturingssysteem alle beschikbare ruimte inneemt, dan zult u\n" "de harde schijf moeten partitioneren. Partitioneren houdt in dat u uw harde\n" "schijf in logische stukken onderverdeelt om ruimte te creëren voor uw\n" "nieuwe Mandrakelinux besturingssysteem.\n" "\n" "Omdat de effecten van het partitioneringsproces over het algemeen niet\n" "terug te draaien zijn en kan leiden tot gegevensverlies als er reeds een\n" "besturingssysteem op de schijf geïnstalleerd is, kan partitioneren\n" "intimiderend en spannend zijn voor een onervaren gebruiker. Gelukkig is\n" "er een wizard die dit proces vereenvoudigt. Leest u de rest van dit\n" "hoofdstukje voordat u verder gaat en neem vooral de tijd.\n" "\n" "Afhankelijk van de configuratie van uw harde schijf, zijn er\n" "verscheidene opties beschikbaar:\n" "\n" " * \"%s\": deze optie zal leiden tot het automatisch\n" "partitioneren van uw lege schijf/schijven. Er worden u verder geen vragen\n" "gesteld bij deze optie.\n" "\n" " * \"%s\": de wizard heeft één of meer bestaande Linux-partities op \n" "uw harde schijf gevonden. Indien u deze wilt gebruiken, kiest \n" "u deze optie. Vervolgens zal u gevraagd worden de koppelpunten te\n" "kiezen die met elk van de partities geassocieerd zijn. De bestaande\n" "koppelpunten zijn standaard al geselecteerd en meestal is het het beste\n" "als u deze behoudt.\n" "\n" " * \"%s\": indien Microsoft Windows\n" "op uw harde schijf is geïnstalleerd en alle beschikbare ruimte in beslag " "neemt,\n" "dient u vrije ruimte te creëren voor Linux-gegevens. Om dat te doen, kunt u\n" "uw Microsoft Windows-partitie en -gegevens wissen (zie het punt\n" "``Gehele schijf wissen'') of uw Microsoft Windows FAT-partitie\n" "verkleinen. Het aanpassen van de grootte kan bewerkstelligd worden zonder\n" "verlies van enige gegevens, vooropgesteld dat u eerst de Windows-partitie\n" "gedefragmenteerd heeft. Een reservekopie maken van uw gegevens kan\n" "bepaald geen kwaad. Deze optie is aanbevolen indien u zowel\n" "Mandrakelinux als Microsoft Windows op dezelfde computer wilt gebruiken.\n" "\n" " Laat het goed tot u doordringen, voordat u deze optie kiest, dat uw\n" "Microsoft Windows partitie na afloop van deze procedure minder groot\n" "zal zijn dan hij nu is. U zult minder vrije ruimte hebben onder\n" "Microsoft Windows om uw gegevens op te slaan of om nieuwe software te\n" "installeren.\n" "\n" " * \"%s\": indien u alle gegevens en alle partities op uw\n" "harde schijf wilt verwijderen en vervangen door uw nieuwe Mandrakelinux-\n" "systeem, kiest u deze optie. Weest u voorzichtig met deze oplossing omdat u\n" "na bevestiging deze keuze niet meer ongedaan kunt maken.\n" "\n" " !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren " "gaan. !!\n" "\n" " * \"%s\": dit wist simpelweg alles op de schijf en begint van\n" "voren af aan met partitioneren. Alle gegevens op uw schijf zullen verloren\n" "gaan.\n" "\n" " !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren " "gaan. !!\n" "\n" " * \"%s\": kies deze optie indien u handmatig\n" "uw harde schijf wenst te partitioneren. Weest u voorzichtig - het is een\n" "krachtige maar riskante keuze en u kunt erg gemakkelijk al uw gegevens\n" "kwijtraken. Derhalve is deze optie slechts aanbevolen indien u zoiets\n" "al eens eerder gedaan hebt en enige ervaring hebt. Voor meer instructies\n" "voor het gebruik van het DiskDrake-hulpprogramma zij u verwezen naar het\n" "hoofdstuk ``Uw partities beheren'' in de ``Beginnershandleiding''." #: help.pm:389 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Gebruik vrije ruimte" #: help.pm:389 #, c-format msgid "Use existing partition" msgstr "Een bestaande partitie gebruiken" #: help.pm:389 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Gebruik de vrije ruimte op de Windows partitie" #: help.pm:389 install_interactive.pm:211 #, c-format msgid "Erase entire disk" msgstr "Volledige harde schijf wissen" #: help.pm:389 #, c-format msgid "Remove Windows" msgstr "Windows verwijderen" #: help.pm:389 install_interactive.pm:226 #, c-format msgid "Custom disk partitioning" msgstr "Aangepaste schijfpartitionering" #: help.pm:392 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. Don't forget to\n" "remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\": saves a list of the packages selected in this installation. To\n" "use this selection with another installation, insert the floppy and start\n" "the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<." msgstr "" "Alstublieft. De installatieprocedure is voltooid en uw GNU/Linux-systeem\n" "is klaar voor gebruik. U hoeft slechts op \"%s\" te klikken om uw\n" "computer opnieuw te starten. Het eerste dat u te zien krijgt nadat uw\n" "computer the apparatuurtests heeft afgerond is het opstartladermenu,\n" "dat u de keus geeft welk besturingssysteem te starten.\n" "\n" "De \"%s\"-knop toont twee extra knoppen voor:\n" "\n" " * \"%s\": om een installatiediskette aan\n" "te maken welke de gehele installatie automatisch zal uitvoeren zonder een\n" "toezichthouder, gelijkend op de installatie die u zonet heeft\n" "geconfigureerd.\n" "\n" " Merk op dat er twee verschillende opties zijn na het aanklikken\n" " van deze knop:\n" "\n" " * \"%s\". Dit is een gedeeltelijk geautomatiseerde installatie.\n" "De partitioneringsstap is de enige interactieve procedure.\n" "\n" " * \"%s\". Volledig geautomatiseerde installatie: de harde\n" "schijf wordt volledig overschreven en alle gegevens erop raken verloren.\n" "\n" " Deze mogelijkheid is erg handig wanneer u een grote hoeveelheid\n" "soortgelijke computers installeert. Zie ook de Auto-installatie afdeling op\n" "onze webstek voor meer informatie.\n" "\n" " * \"%s\"(*) : slaat de pakketlijst op zoals geselecteerd\n" "in deze installatie. Om deze selectie bij een andere installatie\n" "te gebruiken, plaatst u de diskette in het diskettestation en start u het\n" "installatieprogramma. Bij het opstartscherm drukt u op de [F1]-toets en\n" "voert ''linux defcfg=\"floppy\" '' in.\n" "\n" "(*) U heeft een FAT-geformatteerde dskette nodig (om er één onder\n" "GNU/Linux te creëren, typt u \"mformat a:\")" #: help.pm:418 #, c-format msgid "Generate auto-install floppy" msgstr "Auto-installatiediskette aanmaken" #: help.pm:418 install_steps_interactive.pm:1329 #, c-format msgid "Replay" msgstr "Herhalen" #: help.pm:418 install_steps_interactive.pm:1329 #, c-format msgid "Automated" msgstr "Geautomatiseerd" #: help.pm:418 install_steps_interactive.pm:1332 #, c-format msgid "Save packages selection" msgstr "Pakket-selectie opslaan" #: help.pm:421 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "Iedere nieuw gedefinieerde partitie moet geformatteerd worden voor\n" "gebruik (formatteren betekent het creëren van een bestandssysteem).\n" "\n" "Op dit moment wilt u wellicht enkele reeds bestaande partities\n" "herformatteren om alle gegevens erop te wissen. Indien u dat wenst,\n" "selecteert u dan ook deze partities.\n" "\n" "Merk op dat het niet nodig is om alle reeds bestaande partities te\n" "herformatteren. U dient de partities waar het besturingssysteem op\n" "staat te herformatteren (zoals \"/\", \"/usr\" of \"/var\") maar u hoeft\n" "geen partities te herformatteren die gegevens bevatten die u wenst\n" "te bewaren (gewoonlijk \"/home\").\n" "\n" "Weest u alstublieft voorzichtig met het selecteren van partities. Na het\n" "formatteren zullen alle gegevens op de geselecteerde partities definitief\n" "verwijderd zijn.\n" "\n" "Klik op \"%s\" wanneer u klaar bent om de partities te formatteren.\n" "\n" "Klik op \"%s\" indien u een andere partitie voor uw nieuwe\n" "Mandrakelinux besturingssysteem wilt kiezen.\n" "\n" "Klik op \"%s\" indien u partities wenst te selecteren die op\n" "onleesbare blokken gecontroleerd moeten worden." #: help.pm:444 help.pm:1005 install_steps_gtk.pm:431 interactive.pm:404 #: interactive/newt.pm:307 printer/printerdrake.pm:3088 #: standalone/drakTermServ:387 standalone/drakbackup:4012 #: standalone/drakbackup:4041 standalone/drakbackup:4095 #: standalone/drakbackup:4119 standalone/drakbackup:4143 #: standalone/drakbackup:4195 standalone/drakbackup:4225 #: standalone/drakbackup:4247 ugtk2.pm:508 #, c-format msgid "Previous" msgstr "Vorige" #: help.pm:447 #, c-format msgid "" "At the time you are installing Mandrakelinux, it is likely that some\n" "packages will have been updated since the initial release. Bugs may have\n" "been fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one near to you. A package-selection tree will\n" "appear: review the selection, and press \"%s\" to retrieve and install the\n" "selected package(s), or \"%s\" to abort." msgstr "" "Op het moment dat u Mandrakelinux installeert, is het waarschijnlijk\n" "dat sommige pakketten vernieuwd zijn sinds het moment dat het werd\n" "uitgebracht. Sommige onvolkomenheden kunnen gerepareerd zijn en\n" "beveiligingsproblemen opgelost. Om u te kunnen laten profiteren van\n" "deze vernieuwingen kunt u ze nu ophalen van het Internet.\n" "Kruis \"%s\" aan als u een werkende internetverbinding heeft, of \"%s\"\n" "als u liever later herziene pakketten installeert.\n" "\n" "Wanneer u \"%s\" kiest, verschijnt er een lijst van plaatsen waar\n" "herzieningen van kunnen worden opgehaald. Kies degene waar\n" "u zich het dichtst bij in de buurt bevindt. Daarna verschijnt een\n" "pakketselectieboom: ga de selectie na en druk op \"%s\"\n" "om de geselecteerde pakket(ten) op te halen en te installeren, of\n" "op \"%s\" om af te breken." #: help.pm:457 help.pm:602 install_steps_gtk.pm:430 #: install_steps_interactive.pm:148 standalone/drakbackup:4279 #, c-format msgid "Install" msgstr "Installatie" #: help.pm:460 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option. You will\n" "be able to change that security level later with tool draksec from the\n" "Mandrake Control Center.\n" "\n" "The \"%s\" field can inform the system of the user on this computer who\n" "will be responsible for security. Security messages will be sent to that\n" "address." msgstr "" "Op dit punt bent u in de gelegenheid het gewenste beveiligingsniveau te\n" "kiezen voor deze computer. Als een vuistregel is aan te houden dat \n" "het beveiligingsniveau hoger ingesteld zou moeten zijn als de computer\n" "cruciale gegevens bevat, of als hij direct is blootgesteld aan het\n" "internet. Een hoger beveiligingsniveau gaat meestal echter ten koste\n" "van gebruiksgemak.\n" "\n" "Als u niet weet wat te kiezen, behoudt u de standaard optie." #: help.pm:472 #, c-format msgid "Security Administrator" msgstr "Beveiligingsbeheerder" #: help.pm:475 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Op dit punt dient u te kiezen welke partitie(s) gebruikt zullen worden voor\n" "de installatie van uw Mandrakelinux systeem. Indien er reeds partities\n" "gedefinieerd zijn, van een vorige GNU/Linux installatie of door een\n" "ander partitioneringsprogramma, kunt u bestaande partities gebruiken.\n" "In andere gevallen moeten er harde schijf-partities gedefinieerd worden.\n" "\n" "Om partities te creëren, dient u eerst een harde schijf te kiezen. U kunt " "de\n" "te partitioneren schijf selecteren door op \"hda\" te klikken voor de " "eerste\n" "IDE-schijf, \"hdb\" voor de tweede, \"sda\" voor de eerste SCSI-schijf\n" "enzovoort.\n" "\n" "Om de geselecteerde harde schijf te partitioneren, kunt u deze opties\n" "gebruiken:\n" "\n" " * \"%s\": deze optie verwijdert alle partities op de\n" "geselecteerde harde schijf.\n" "\n" " * \"%s\": deze optie creëert automatisch ext3- en swap-\n" "partities in de vrije ruimte op uw harde schijf.\n" "\n" " \"%s\": geeft toegang tot extra opties:\n" "\n" " * \"%s\": slaat de partitietabel op op een diskette. Nuttig om\n" "later zonodig de partitietabel te herstellen. Het is sterk aanbevolen deze " "stap uit\n" "te voeren.\n" "\n" " * \"%s\": deze optie stelt u in staat om een eerder opgeslagen\n" "partitietabel van diskette te herstellen.\n" "\n" " * \"%s\": indien uw partitietabel is beschadigd, kunt u hem\n" "trachten te herstellen met deze optie. Weest u voorzichtig en onthoudt dat\n" "dit niet altijd werkt.\n" "\n" " * \"%s\": gooit alle veranderingen weg en laadt de\n" "partitietabel die oorspronkelijk op de harde schijf stond.\n" "\n" " * \"%s\": het deselecteren van deze optie\n" "dwingt gebruikers om handmatig verwisselbare media zoals diskettes en\n" "CD-ROMs te koppelen en te ontkoppelen.\n" "\n" " * \"%s\": gebruik deze optie indien u een wizard wenst te gebruiken om\n" "uw harde schijf mee te partitioneren. Dit is aanbevolen als u geen brede " "kennis\n" "heeft over partitioneren.\n" "\n" " * \"%s\": gebruik deze optie om uw wijzigingen te annuleren.\n" "\n" " * \"%s\" laat extra handelingen toe op\n" "partities (type, opties, formaat) en geeft meer informatie over de schijf.\n" "\n" " * \"%s\": wanneer u klaar bent met het partitioneren van uw harde schijf, " "zal dit\n" "de wijzigingen wegschrijven naar schijf.\n" "\n" "Bij het definiëren van de partitiegrootte kunt u de grootte fijnafregelen\n" "met de pijltjestoetsen op uw toetsenbord.\n" "\n" "Merk op: u kunt iedere optie met behulp van het toetsenbord bereiken. " "Navigeer door\n" "de partities met behulp van [Tab] en [Omhoog/Omlaag] pijlen.\n" "\n" "Wanneer een partitie is geselecteerd, kunt u deze toetscombinaties " "gebruiken:\n" "\n" " * Ctrl+c om een nieuwe partitie te creëren (als een lege ruimte is " "geselecteerd)\n" "\n" " * Ctrl+d om een partitie te verwijderen\n" "\n" " * Ctrl+m om het koppelpunt in te stellen\n" "\n" "Voor meer informatie over de verschillende types bestandssystemen die er " "zijn,\n" "leest u het hoofdstuk 'ext2FS' van de ``Referentiehandleiding''.\n" "\n" "In het geval dat u op een PPC computer aan het installeren bent, zult u een " "kleine\n" "HFS \"bootstrap\"-partitie van tenminste 1MB willen creëren voor gebruik\n" " door de yaboot-opstartlader. Indien u liever de partitie wat groter maakt,\n" "zeg 50MB, dan vindt u het misschien een nuttige plek om een reserve kernel-\n" "en ramdisk beeldbestand in op te slaan voor opstart-noodgevallen." #: help.pm:544 #, c-format msgid "Removable media auto-mounting" msgstr "Automatische koppeling van verwisselbare media" #: help.pm:544 #, c-format msgid "Toggle between normal/expert mode" msgstr "Normale/expert-modus" #: help.pm:547 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Er is meer dan één Microsoft Windows partitie op uw harde schijf gevonden.\n" "Kiest u degene die u wilt verkleinen om uw nieuwe Mandrakelinux\n" "besturingssysteem te kunnen installeren.\n" "\n" "Elke partitie wordt getoond als volgt: \"Linux naam\", \"Windows naam\"\n" "\"Capaciteit\".\n" "\n" "\"Linux naam\" is gestructureerd: \"harde schijf-type\", \n" "\"harde schijf-teken\", \"partitienummer\" (bijvoorbeeld \"hda1\").\n" "\n" "\"Harde schijf-type\" is \"hd\" indien uw harde schijf een IDE-schijf is en\n" "\"sd\" indien het een SCSI-schijf is.\n" "\n" "\"Harde schijf-teken\" is altijd een letter na \"hd\" of \"sd\". Bij IDE-\n" "harde schijven:\n" "\n" " * \"a\" betekent \"master harde schijf op de primaire IDE controller\",\n" "\n" " * \"b\" betekent \"slave harde schijf op de primaire IDE controller\",\n" "\n" " * \"c\" betekent \"master harde schijf op de secundaire IDE controller\",\n" "\n" " * \"d\" betekent \"slave harde schijf op de secundaire IDE controller\".\n" "\n" "Bij SCSI harde schijven betekent een \"a\" \"laagste SCSI ID\", een\"b\" " "\"op één na laagste SCSI ID\", enzovoort.\n" "\n" "\"Windows naam\" is de letter van uw harde schijf onder Windows (de\n" "eerste schijf of partitie wordt \"C:\" genoemd)." #: help.pm:578 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" "\"%s\": de huidige landselectie nagaan. Indien u zich niet in dit land\n" "bevindt, klik dan op de \"%s\"-knop en kies een ander land.Als uw land niet " "in de eerste getoonde lijst staat, klik dan op de\n" "\"%s\"-knop om de complete landenlijst te zien." #: help.pm:584 #, fuzzy, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrakelinux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" "Deze stap activeert slechts wanneer een oude GNU/Linux-partitie gevonden is\n" "op uw computer.\n" "\n" "Nu is het noodzakelijk dat u het installatieprogramma informeert of u een \n" "nieuwe installatie of een opwaardering van een bestaand Mandrakelinux\n" "systeem wilt uitvoeren:\n" "\n" " * \"%s\": Dit verwijdert het oude systeem vrijwel volledig.\n" "Indien u de partitionering van uw harde schijven wilt wijzigen, of het\n" "bestandssysteem wenst te wijzigen, dan dient u deze optie te kiezen.\n" "Niettemin kunt u wellicht voorkomen dat al uw bestaande gegevens worden\n" "overschreven. Dit is afhankelijk van uw partitioneringsschema.\n" "\n" " * \"%s\": deze installatieklasse stelt u in staat de pakketten\n" "die momenteel op uw Mandrakelinux-systeem zijn geïnstalleerd te verversen.\n" "Uw huidige partitioneringsschema en gebruikersgegevens worden niet " "veranderd.\n" "De meeste andere configuratiestappen blijven beschikbaar, zoals bij een\n" "gewone installatie.\n" "\n" "Het gebruik van de ``Opwaardering''-optie zou prima moeten werken op\n" "Mandrakelinux versie \"8.1\" of recenter. Het uitvoeren van een\n" "opwaardering op versies eerder dan Mandrakelinux versie \"8.1\" is afgeraden." #: help.pm:605 #, fuzzy, c-format msgid "" "Depending on the language you chose in section , DrakX will automatically\n" "select a particular type of keyboard configuration. Check that the\n" "selection suits you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard that corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Afhankelijk van de taal die u heeft gekozen, selecteert DrakX automatisch\n" "een bepaalde toetsenbordindeling. Het is echter mogelijk dat u\n" "een toetsenbord bezit dat niet exact correspondeert met uw taal: \n" "bijvoorbeeld, als u een Engels sprekende Zwitser bent dan heeft u misschien\n" "een Zwitsers toetsenbord. Of als u Engels spreekt maar zich in\n" "Quebec bevindt, verkeert u misschien in dezelfde situatie waarbij\n" "uw eigen taal en toetsenbord niet overeenkomen. In beide gevallen zorgt\n" "deze installatiestap ervoor dat u het juiste toetsenbord uit een lijst\n" "kunt kiezen.\n" "\n" "Klik op de \"%s\"-knop om de complete lijst van ondersteunde\n" "toetsenbordindelingen te zien.\n" "\n" "Als u een toetsenbordindeling kiest welke gebaseerd is op een niet-Latijns\n" "alfabet, zal het volgende dialoogvenster u vragen om de toetscombinatie\n" "te kiezen die zal schakelen tussen de Latijn- en niet-Latijnse indelingen." #: help.pm:624 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. Though full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux will be using it\n" "or not depending on the user choices:\n" "\n" " * If you choose a languages with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for the system at user request by\n" "selecting option \"%s\" independently of which language(s) have been\n" "chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will also be installed.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "Uw keuze van taalvoorkeur beïnvloedt de taal van de documentatie, het\n" "installatieprogramma en het systeem in het algemeen. Selecteer eerst\n" "de regio waarin u zich bevindt, en daarna de taal die u spreekt.\n" "\n" "Door te klikken op de \"%s\"-knop kunt u andere talen selecteren\n" "die op uw werkstation geïnstalleerd moeten worden. Het selecteren van\n" "andere talen zal de taalspecifieke bestanden voor systeemdocumentatie\n" "en toepassingen installeren. Als u bijvoorbeeld gastheer bent voor Spaanse\n" "gebruikers op uw machine, selecteert u Nederlands als eerste taal in het\n" "boom-overzicht en in de Geavanceerd-afdeling selecteert u \"%s\".\n" "\n" "Merk op dat er geen beperking is in het aantal extra talen. U kunt er\n" "meerdere kiezen of ze zelfs allemaal installeren door het \"%s\"\n" "vakje aan te kruisen. Ondersteuning voor een taal selecteren betekent dat\n" "vertalingen, lettertypen, spellingscontrole etc. voor die taal zullen\n" "worden geïnstalleerd. Daarnaast kunt u met het vakje\n" "\"%s\" het systeem dwingen Unicode (UTF-8) te\n" "gebruiken. Merk echter op dat dit een experimentele functie is. Mocht u\n" "meerdere talen selecteren die verschillende coderingen vereisen dan zal\n" "Unicode-ondersteuning sowieso geïnstalleerd worden.\n" "\n" "Om te schakelen tussen de diverse talen die op uw computer zijn " "geïnstalleerd,\n" "kunt u de opdracht \"/usr/sbin/localedrake\" uitvoeren als \"root\" om de " "taal\n" "voor het gehele systeem te veranderen. Het uitvoeren van deze opdracht als\n" "een gewone gebruiker zal slechts de taalinstellingen voor die individuele\n" "gebruiker veranderen." #: help.pm:660 #, c-format msgid "Espanol" msgstr "Spaans" #: help.pm:663 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "In case you have a 3 buttons mouse without wheel, you can choose the mouse\n" "that says \"%s\". DrakX will then configure your mouse so that you can\n" "simulate the wheel with it: to do so, press the middle button and move your\n" "mouse up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "Normaal gesproken ziet DrakX vanzelf het aantal knoppen op uw muis.\n" "Zoniet, dan neemt het aan dat u een tweeknops-muis heeft en\n" "zal deze instellen voor het nadoen van een derde knop. De derde\n" "muisknop van een tweeknopsmuis kan worden ``ingedrukt'' door\n" "tegelijkertijd de linker- en rechterknop te klikken.\n" "DrakX zoekt zelf uit of dit een PS/2-, seriële- of USB-muis is.\n" "\n" "Indien u een ander type muis wenst te specificeren, selecteer dan het\n" "juiste type uit de getoonde lijst.\n" "\n" "Indien u een andere muis kiest dan de standaardmuis, zult u een muis-\n" "testscherm te zien krijgen. Gebruik de knoppen en het wieltje om te\n" "controleren dat de instellingen goed zijn en dat de muis goed werkt.\n" "Als de muis niet correct werkt, druk dan op de spatiebalk of de [Enter]-\n" "toets om de test te annuleren en terug te gaan naar de keuzelijst.\n" "\n" "Af en toe worden wielmuizen niet automatisch gevonden, dus dan dient u uw\n" "muis te selecteren uit de lijst. Zorg ervoor dat u degene kiest die\n" "correspondeert met de poort waaraan de muis verbonden is. Nadat u\n" "de muis geselecteerd heeft en op de \"%s\"-knop heeft geklikt,\n" "wordt een afbeelding van een muis op het scherm weergegeven. U dient dan\n" "het wieltje van uw muis te bewegen om uzelf ervan te verzekeren dat het\n" "correct geactiveerd is. Zodra u het scherm-wieltje ziet bewegen bij het\n" "bewegen van uw muiswieltje, test dan de knoppen en ga na dat de muispijl\n" "over het scherm beweegt wanneer u uw muis beweegt." #: help.pm:691 #, c-format msgid "with Wheel emulation" msgstr "met wiel-emulatie" #: help.pm:694 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Gelieve de juiste poort te kiezen. COM1 onder Windows wordt bijvoorbeeld\n" "\"ttyS0\" genoemd onder GNU/Linux." #: help.pm:698 #, fuzzy, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password you chose is too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the Internet and you absolutely trust everybody\n" "who uses your computer, you can choose to have \"%s\"." msgstr "" "Dit is de meest cruciale beslissing voor de beveiliging van uw GNU/Linux\n" "systeem: u dient het \"root\"-wachtwoord in te voeren. \"root\" is de\n" "systeembeheerder en is de enige die geautoriseerd is om vernieuwingen uit\n" "te voeren, gebruikers toe te voegen, de algehele systeemconfiguratie te\n" "wijzigen, enzovoort. Kortom, \"root\" kan alles doen! Daarom dient u een\n" "lastig te raden wachtwoord te kiezen - DrakX vertelt het u als het te \n" "makkelijk is. Zoals u kunt zien is het niet verplicht een wachtwoord in te\n" "vullen, maar dit raden wij sterk af. GNU/Linux is net zo gevoelig voor\n" "bedieningsfouten als andere besturingssystemen.\n" "Omdat \"root\" alle beperkingen kan overschrijden en onbedoeld alle\n" "gegevens op partities kan wissen door achteloos deze partities te\n" "benaderen, is het belangrijk dat het lastig is om \"root\" te worden.\n" "\n" "Het wachtwoord zou een mix van alfanumerieke karakters moeten zijn en\n" "tenminste 8 karakters lang. Schrijf nooit het \"root\"-wachtwoord op -\n" "dat maakt het te makkelijk om een systeem te compromitteren.\n" "\n" "Het addertje onder het gras -- maak ook het wachtwoord niet te lang of\n" "gecompliceerd omdat u het moet kunnen onthouden!\n" "\n" "Het wachtwoord zal niet op het scherm getoond worden wanneer u het\n" "intypt. Vandaar dat u het wachtwoord tweemaal moet intypen om de kans\n" "te verminderen dat u een typfout maakt. Indien u toevallig dezelfde typfout\n" "twee keer maakt, dan zal dit ``incorrecte'' wachtwoord gebruikt moeten\n" "worden bij de eerste keer dat u verbinding maakt.\n" "\n" "Indien u wenst dat de toegang tot deze computer gecontroleerd wordt door\n" "een aanmeldingscontrole-server, klik dan op de \"%s\"-knop.\n" "\n" "Indien uw netwerk LDAP, NIS, of PDC Windows domeinaanmeldingscontrole-\n" "diensten gebruikt, selecteer dan de overeenkomende optie\n" "als \"%s\". In het geval dat u niet weet, welke te kiezen,\n" "raadpleeg dan uw netwerkbeheerder.\n" "\n" "Mocht u het lastig vinden wachtwoorden te onthouden, als uw computer\n" "nooit verbonden zal zijn met het internet of als u absoluut iedereen\n" "vertrouwt die toegang heeft tot uw computer, kunt u kiezen voor \"%s\"." #: help.pm:733 #, c-format msgid "authentication" msgstr "aanmeldingscontrole" #. -PO: keep this short or else the buttons will not fit in the window #: help.pm:733 install_steps_interactive.pm:1159 #, c-format msgid "No password" msgstr "Geen wachtwoord" #: help.pm:736 #, fuzzy, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer GRUB (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" " * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n" "management, notably for laptops. If you know your hardware supports it and\n" "you need it, check this box.\n" "\n" " * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n" "instabilities, machine freeze, ...) you should try disabling APIC by\n" "checking this box.\n" "\n" "!! Be aware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrakelinux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" "Dit dialoogvenster laat u uw opstartlader fijn afregelen:\n" "\n" " * \"%s\": u heeft drie keuzes voor uw opstartlader:\n" "\n" " * \"%s\": indien u GRUB prefereert (tekstmenu).\n" "\n" " * \"%s\" indien u LILO met tekstmenu-interface\n" "prefereert.\n" "\n" " * \"%s\": indien u LILO met grafische menu-interface\n" "prefereert.\n" "\n" " * \"%s\": in de meeste gevallen zult u de standaardkeuze\n" "(\"%s\") niet veranderen, maar als u dat prefereert kan de\n" "opstartlader op de tweede harde schijf (\"%s\") geïnstalleerd\n" "worden, of zelfs op een diskette (\"%s\").\n" "\n" " * \"%s\":\n" "wanneer de computer (opnieuw) wordt opgestart, is dit de periode\n" "die de gebruiker heeft om een ander item te kiezen uit het opstartmenu\n" "dan de standaardoptie.\n" "\n" "!! Let op dat indien u geen opstartlader installeert (door hier \n" "\"%s\" te kiezen) u ervoor moet zorgen dat u een manier heeft om\n" "uw Mandrakelinux-systeem op te starten! Zorg ervoor dat u weet wat u doet\n" "voordat u één van de opties wijzigt. !!\n" "\n" "Klikken op de \"%s\"-knop in dit dialoogvenster toont \n" "geavanceerde opties, waar alleen een gevorderde gebruiker iets\n" "aan heeft." #: help.pm:768 #, c-format msgid "GRUB" msgstr "GRUB" #: help.pm:768 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: help.pm:768 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: help.pm:768 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: help.pm:768 #, c-format msgid "Delay before booting the default image" msgstr "Wachttijd voor het opstarten van standaard beeldbestand" #: help.pm:768 #, c-format msgid "Force no APIC" msgstr "Forceren van geen APIC" #: help.pm:771 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "Nadat u de algemene opstartlader-parameters heeft geconfigureerd, zal de\n" "lijst van opstartopties die beschikbaar zijn bij het opstarten worden " "weergegeven.\n" "\n" "Als er andere besturingssystemen op uw computer zijn geïnstalleerd, zullen\n" "deze automatisch worden toegevoegd aan het opstartmenu. U kunt de\n" "bestaande opties fijn afregelen. Met \"%s\" maakt u een nieuwe \n" "ingang aan; door een item te selecteren en op \"%s\" of \"%s\"\n" "te klikken kunt u het wijzigen of verwijderen. \"%s\" maakt uw wijzigingen\n" "permanent.\n" "\n" "U wilt verder misschien niet iedereen die naar de console gaat en de \n" "computer herstart, toegang geven tot die andere besturingssystemen.\n" "In dat geval kunt u de overeenkomstige items verwijderen uit het opstart-\n" "menu. Maar dan zult u echter wel een opstartdiskette nodig hebben om de\n" "andere besturingssystemen nog te kunnen opstarten!" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #: standalone/drakbackup:1604 standalone/drakfont:589 standalone/drakfont:655 #: standalone/drakups:280 standalone/drakups:329 standalone/drakups:349 #: standalone/drakvpn:331 standalone/drakvpn:692 #, c-format msgid "Add" msgstr "Toevoegen" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #, c-format msgid "Modify" msgstr "Aanpassen" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #: standalone/drakups:282 standalone/drakups:331 standalone/drakups:351 #: standalone/drakvpn:331 standalone/drakvpn:692 #, c-format msgid "Remove" msgstr "Verwijderen" #: help.pm:787 #, c-format msgid "" "LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or any\n" "other OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n" "won't install any bootloader. Use it only if you know what you are doing." msgstr "" "LILO en GRUB zijn opstartladers voor GNU/Linux. Normaal gesproken gaat\n" "deze stap volkomen automatisch. DrakX zal de bootsector van de schijf\n" "analyseren en handelen naar bevind van zaken:\n" "\n" " * als een Windows-bootsector is gevonden, dan zal het deze vervangen door " "een GRUB/LILO bootsector. Op deze manier zult u de mogelijkheid hebben om " "ofwel GNU/Linux te starten, ofwel een ander besturingssysteem.\n" "\n" " * als een GRUB- of LILO-bootsector is gevonden, dan zal het deze vervangen " "door een nieuwe.\n" "\n" "Wanneer dit niet bepaald kan worden dan zal DrakX u vragen waar de\n" "opstartlader geplaatst dient te worden. In het algemeen is \"%s\" de\n" " veilgste locatie. Met de keuze \"%s\" wordt er in het geheel geen \n" "opstartlader geïnstalleerd. Gebruik dit alleen als u weet wat u doet." #: help.pm:803 #, fuzzy, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrakelinux offers two. Each of the printing systems\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it is compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" "Het is nu tijd een afdruksysteem voor uw computer te selecteren. Andere\n" "besturingssystemen geven u er wellicht maar één, maar Mandrakelinux\n" "biedt er twee. Elk van deze afdruksystemen is het meest geschikt voor\n" "bepaalde typen configuraties.\n" "\n" " * \"%s\" - een afkorting van \"print, don't queue\", is de keuze indien\n" "u een directe verbinding tussen uw computer en uw printer heeft en u\n" "in staat wilt zijn om printtaken snel te stoppen in het geval van\n" "papierstoringen en u niet beschikt over netwerkprinters. (\"%s\" kan\n" "alleen omgaan met erg simpele netwerkprinttaken en is enigszins\n" "langzaam wanneer gebruikt in een netwerk.) \"pdq\" is de aanbevolen keuze\n" "als dit uw eerste kennismaking met GNU/Linux is.\n" "\n" " * \"%s\" - ``Common Unix Printing System'' is uitstekend geschikt\n" "om naar uw lokale printer af te drukken maar ook naar de andere kant\n" "van de planeet. Het is eenvoudig te configureren en kan dienstdoen als\n" "een server of een client voor het antieke \"lpd\" afdruksysteem, zodat het\n" "overweg kan met oudere besturingssystemen die wellicht afdrukdiensten\n" "vereisen. Alhoewel het behoorlijk krachtig is, is de\n" "basisinstallatie bijna net zo eenvoudig als \"pdq\". In het geval dat u \n" "een \"lpd\"-server-emulatie nodig heeft, dient u de \"cups-lpd\"-daemon\n" "in te schakelen. \"%s\" heeft grafische schillen voor het afdrukken en\n" "het beheren van de printer.\n" "\n" "Wanneer u nu een keuze maakt en er later achter komt dat uw afdruksysteem\n" "u niet bevalt dan kunt u het veraneren door PrinterDrake uit te voeren\n" "vanuit het Mandrake Configuratiecentrum en op de expert-knop te klikken." #: help.pm:826 #, c-format msgid "pdq" msgstr "pdq" #: help.pm:826 printer/cups.pm:115 printer/data.pm:83 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:829 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX zal om te beginnen zoeken naar IDE-apparaten die in uw\n" "computer aanwezig zijn. Het zal tevens zoeken naar één of meer PCI\n" "SCSI-kaart(en) in uw systeem. Als een SCSI-kaart gevonden is, zal\n" "DrakX automatisch het geschikte stuurprogramma installeren.\n" "\n" "Omdat hardware-bespeuring niet altijd gegarandeerd foutloos werkt,\n" "is het mogelijk dat DrakX uw harde schijven niet vindt. In dat geval\n" "zult u uw apparatuur handmatig moeten specificeren.\n" "\n" "In het geval dat u handmatig uw PCI SCSI-adapter heeft moeten specificeren,\n" "zal DrakX u vragen of u er opties aan wilt meegeven. Staat u DrakX toe om\n" "de apparatuur na te gaan voor kaartspecifieke opties die nodig zijn om de\n" "adapter te initialiseren. In de meeste gevallen zal DrakX deze stap\n" "probleemloos doorlopen.\n" "\n" "Als DrakX niet in staat is om automatisch te onderzoeken welke opties\n" "doorgegeven moeten worden aan de apparatuur, zult u handmatig het\n" "stuurprogramma moeten configureren." #: help.pm:847 #, fuzzy, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " \t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " \t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "U kunt nog meer ingangen aan yaboot toevoegen, voor andere\n" "besturingssystemen, alternatieve kernels of voor een nood-opstart\n" "beeldbestand.\n" "\n" "Voor andere besturingssystemen bestaat de ingang uit een\n" "naam (label) en de \"root\"-partitie.\n" "\n" "Voor Linux zijn er nog enkele extra opties:\n" "\n" " * Label: Dit is de naam die u dient in te voeren op de yaboot-\n" "aanwijzing om deze opstartoptie te selecteren.\n" "\n" " * Image: dit is de naam van de op te starten kernel. Gebruikelijk is\n" "vmlinux of een variatie van vmlinux-met-een-toevoeging.\n" "\n" " * Root: het \"root\"-apparaat of ``/'' voor uw Linux-installatie.\n" "\n" " * Append: op Apple apparaten wordt de kernel-append optie veel\n" "gebruikt om te assisteren bij het initialiseren van de\n" "video-apparatuur, of om de toetsenbord-muisimitatie te\n" "activeren in verband met de ontbrekende 2e en 3e muisknop op een\n" "standaard Apple muis. Hier volgen enkele voorbeelden:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode=12,cmode=24 adb_buttons=103,111\n" "\n" " * Initrd: deze optie kan voor twee doelen gebruikt worden, het kunnen\n" "laden van initiële modules voordat het opstartapparaat\n" "bereikbaar is, of om een geheugenschijf te laden voor een\n" "nood-opstartsituatie.\n" "\n" " * Initrd-size: de standaard geheugenschijf-grootte is 4096 Kbytes. Indien\n" "u een grotere geheugenschijf wilt toewijzen, kunt u met deze\n" "optie een grotere geheugenschijf specificeren dan de standaard.\n" "\n" " * Read-write: normaal gesproken wordt de \"root\"-partitie tijdens\n" "opstarten als alleen-lezen gekoppeld om een bestandssysteemcontrole te\n" "kunnen uitvoeren alvorens \"live\" te gaan.\n" "Met deze optie kunt u dit met de hand instellen.\n" "\n" " * NoVideo: indien het Apple video-apparaat uitzonderlijk veel\n" "problemen geeft, kunt u hiermee opstarten in een\n" "zogenaamde ``novideo'' modus met standaard framebuffer ondersteuning.\n" "\n" " * Default: selecteert dit item als de standaard Linuxselectie,\n" "deze selectie zal op de yaboot-aanwijzing dan standaard\n" "verkozen zijn wanneer u op ENTER drukt. Deze ingang\n" "zal ook aan een ``*'' herkenbaar zijn als U op de [Tab]\n" "toets drukt op de yaboot-aanwijzing om de opstartmogelijkheden\n" "te bekijken." #: help.pm:894 #, fuzzy, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Take care to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot is een opstartlader voor NewWorld Macintosh apparatuur.\n" "Het kan GNU/Linux, MacOS of MacOS X opstarten.\n" "Normaal gesproken worden MacOS en MacOS X correct bespeurd\n" "en geïnstalleerd in het opstartlader-menu. Als dit niet het\n" "geval is, dan kunt u in dit scherm handmatig een item toevoegen. Let op\n" "dat u de correcte parameters kiest.\n" "\n" "Yaboots' belangrijkste opties zijn:\n" "\n" " * Initialisatie-bericht: een eenvoudig tekstbericht getoond voor de " "opstartaanwijzing\n" "\n" " * Opstartapparaat: geeft aan waar u de benodigde informatie om GNU/Linux\n" " op te starten wilt plaatsen. Normaal gesproken stelt u\n" " eerder een bootstrap-partitie in die deze informatie bevat.\n" "\n" " * Open Firmware Delay: Anders dan LILO zijn er twee wachttijden\n" "beschikbaar met yaboot. De eerste wachttijd wordt in seconden gemeten en\n" "op dit punt kunt u kiezen uit CD, OF-opstart, MacOS of Linux;\n" "\n" " * Kernel opstart-wachttijd: deze wachttijd komt overeen met de " "opstartvertraging\n" "van LILO. Na het selecteren van Linux heeft u deze tijd met ophogingen van\n" "0,1 seconde voordat uw standaard kernel wordt geselecteerd;\n" "\n" " * CD-opstart inschakelen?: het instellen van deze optie staat u toe op te\n" "starten met \"C\" voor CD op de opstartaanwijzing.\n" "\n" " * OF-opstart inschakelen?: het instellen van deze optie staat u toe om \n" "\"N\" voor Open Firmware te kiezen op de eerste opstartaanwijzing.\n" "\n" " * Standaard besturingssysteem?: hier kunt U selecteren welk \n" "besturingssysteem automatisch wordt gestart na de Open Firmware vertraging." #: help.pm:926 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "\"%s\": als een geluidskaart op uw computer gevonden is, dan staat\n" "dat hier weergegeven. In het geval dat de weergegeven geluidskaart niet\n" "degene is die daadwerkelijk aanwezig is in uw computer, dan kunt u op de " "knop\n" "klikken en een ander stuurprogramma kiezen." #: help.pm:929 help.pm:991 install_steps_interactive.pm:967 #: install_steps_interactive.pm:984 #, c-format msgid "Sound card" msgstr "Geluidskaart" #: help.pm:932 #, fuzzy, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you wish to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "Bij wijze van overzicht zal het installatieprogramma een lijstje tonen\n" "van de informatie die het heeft over uw computer.\n" "Afhankelijk van welke apparatuur u heeft, krijgt u enkele of alle van de\n" "onderstaande punten te zien. Elk punt bestaat uit het te configureren item,\n" "gevolgd door een korte samenvatting van de huidige configuratie. Klik op\n" "de corresponderende \"%s\"-knop om die aan te passen.\n" "\n" " * \"%s\": de huidige toetsenbordindeling nagaan en zonodig\n" "aanpassen.\n" " * \"%s\": de huidige landselectie nagaan. Indien u zich niet in dit\n" "land bevindt, klik dan op de \"%s\"-knop om een ander land te\n" "kiezen. Als uw land niet in de eerste getoonde lijst staat, klik dan op\n" "de \"%s\"-knop om de complete landenlijst te zien.\n" "\n" " * \"%s\": Normaal gesproken leidt DrakX uw tijdzone af aan de hand\n" "van het land dat u gekozen heeft. U kunt op de \"%s\" knop\n" "drukken als dit incorrect is.\n" "\n" " * \"%s\": de huidige muisconfiguratie nagaan. Zonodig kunt u op de knop " "klikken om hem aan te passen.\n" "\n" " * \"%s\": klikken op de \"%s\"-knop zal de\n" "printerconfiguratie-wizard openen. Raadpleeg het corresponderende\n" "hoofdstuk van de ``Beginnershandleiding'' voor meer informatie over\n" "hoe u een nieuwe printer instelt. De daar getoonde interface\n" "lijkt op degene die tijdens de installatie gebruikt wordt.\n" "\n" " * \"%s\": indien een geluidskaart gevonden is op uw systeem,\n" "wordt dat hier weergegeven. In het geval dat de aangegeven geluidskaart\n" "niet degene is die daadwerkelijk aanwezig is in uw computer, dan kunt u\n" "op deze knop klikken en een ander stuurprogramma uitkiezen.\n" "\n" " * \"%s\": normaal gesproken configureert DrakX uw\n" " grafische interface in een resolutie van \"800x600\" of \"1024x768\".\n" "Indien daarmee niet tevreden bent, klik dan op de \"%s\"-knop\n" "om uw grafische interface te herconfigureren.\n" "\n" " * \"%s\": indien een TV-kaart gevonden is op uw systeem, wordt\n" "dat hier weergegeven. In het geval dat u een TV-kaart heeft die niet is\n" "gevonden, klik dan op \"%s\" om te trachten deze handmatig te\n" "configureren.\n" "\n" "* \"%s\": indien een ISDN-kaart gevonden is op uw systeem, wordt\n" "dat hier weergegeven. U kunt op \"%s\" klikken om de parameters\n" "die erbij horen aan te passen.\n" "\n" " * \"%s\": Indien u nu uw internettoegang of toegang tot het lokale\n" "netwerk wilt instellen.\n" "\n" " * \"%s\": dit item biedt u de mogelijkheid het \n" "beveiligingsniveau ingesteld in een eerdere stap, opnieuw te definiëren.\n" "\n" " * \"%s\": indien u van plan bent uw computer te verbinden met het\n" "Internet dan is het een goed idee om uzelf te beschermen tegen indringers\n" "door een firewall op te zetten. Raadpleeg het corresponderende hoofdstuk\n" "uit de ``Beginnershandleiding'' voor details over de firewall-instellingen.\n" "\n" " * \"%s\": indien u uw opstartlader-configuratie wenst te \n" "veranderen, klikt u op die knop. Alleen aankomen als u een gevorderde\n" "gebruiker bent.\n" "\n" " * \"%s\": U bent hier in staat om de diensten die op uw computer\n" "actief zullen zijn, fijn af te regelen. Indien u deze computer als server\n" "gaat inzetten dan is het een goed idee om deze instellingen na te lopen." #: help.pm:991 install_steps_interactive.pm:110 #: install_steps_interactive.pm:900 standalone/keyboarddrake:23 #, c-format msgid "Keyboard" msgstr "Toetsenbord" #: help.pm:991 install_steps_interactive.pm:926 #, c-format msgid "Timezone" msgstr "Tijdzone" #: help.pm:991 #, c-format msgid "Graphical Interface" msgstr "Grafische interface" #: help.pm:991 install_steps_interactive.pm:1000 #, c-format msgid "TV card" msgstr "TV-kaart" #: help.pm:991 #, c-format msgid "ISDN card" msgstr "Interne ISDN kaart" #: help.pm:991 install_steps_interactive.pm:1018 standalone/drakbackup:2101 #, c-format msgid "Network" msgstr "Netwerk" #: help.pm:991 install_steps_interactive.pm:1044 #, c-format msgid "Security Level" msgstr "Beveiligingsniveau" #: help.pm:991 install_steps_interactive.pm:1058 #, c-format msgid "Firewall" msgstr "Firewall" #: help.pm:991 install_steps_interactive.pm:1072 #, c-format msgid "Bootloader" msgstr "Opstartlader" #: help.pm:991 install_steps_interactive.pm:1082 services.pm:195 #, c-format msgid "Services" msgstr "Diensten" #: help.pm:994 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Kies de harde schijf die u wilt wissen om uw nieuwe\n" "Mandrakelinux partitie op te installeren. Wees voorzichtig, alle data die\n" "op deze schijf staat zal verloren gaan, en niet terug te halen zijn!" #: help.pm:999 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Klik op \"%s\" wanneer u alle gegevens en partities die zich \n" "op deze harde schijf bevinden, wilt wissen. Wees voorzichtig, want na het\n" "klikken op \"%s\" zult u niet in staat zijn om enige op de schijf\n" "aanwezige gegevens of partities terug te halen, met inbegrip van alle " "Windows-gegevens.\n" "\n" "Klik op \"%s\" om deze operatie te stoppen zonder daarbij \n" "gegevens of partities op de schijf te verliezen." #: install2.pm:119 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Kan kernelmodules behorend bij uw kernel niet benaderen (bestand %s " "ontbreekt), dit betekent normaal gesproken dat uw opstartdiskette niet " "hetzelfde is als die van het installatie medium. (Maak een nieuwe boot " "diskette)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "U dient tevens %s te formatteren" #: install_any.pm:411 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "U heeft de volgende server(s) geselecteerd: %s\n" "\n" "\n" "Deze servers worden standaard geactiveerd. Ze hebben geen bekende\n" "beveiligingsproblemen, maar het is mogelijk dat men nieuwe vindt.\n" "Zorg er in dat geval voor dat u zo spoedig mogelijk opwaardeert.\n" "\n" "\n" "Weet u zeker dat u deze servers wilt installeren?\n" #: install_any.pm:432 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "De volgende pakketten zullen verwijderd worden om uw systeem te kunnen " "opwaarderen: %s\n" "\n" "\n" "Weet u zeker dat u deze pakketten wilt verwijderen?\n" #: install_any.pm:827 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" "Plaats een met het FAT-bestandssysteem geformatteerde diskette in station %s" #: install_any.pm:831 #, c-format msgid "This floppy is not FAT formatted" msgstr "Deze diskette is niet FAT-geformatteerd" #: install_any.pm:843 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Om deze opgeslagen pakketselectie te gebruiken, start u de installatie \n" "met ''linux defcfg=floppy''" #: install_any.pm:871 partition_table.pm:847 #, c-format msgid "Error reading file %s" msgstr "Fout bij het lezen van bestand %s" #: install_any.pm:995 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Er is een fout opgetreden - er werden geen geldige apparaten gevonden " "waarop\n" "nieuwe bestandssystemen konden worden gecreëerd. Gelieve uw hardware na te\n" "kijken voor de oorzaak van dit probleem." #: install_gtk.pm:161 #, c-format msgid "System installation" msgstr "Systeeminstallatie" #: install_gtk.pm:164 #, c-format msgid "System configuration" msgstr "Systeemconfiguratie" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Sommige hardware op uw computer heeft ''fabrikantsgebonden'' drivers \n" "nodig om te kunnen functioneren. U kunt informatie hierover vinden op: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "U moet een root-partitie hebben.\n" "Hiervoor dient u een partitie aan te maken (of op een bestaande partitie " "teklikken). Daarna kiest u de actie ``Koppelpunt'' en stelt u dit i nop `/'" #: install_interactive.pm:67 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "U heeft geen swap-partitie!\n" "\n" "Toch verdergaan?" #: install_interactive.pm:70 install_steps.pm:206 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" "U moet een partitie met FAT-bestandssysteem gekoppeld hebben aan /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Niet genoeg vrije ruimte om nieuwe partities te maken" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Gebruik een bestaande partitie" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Er is geen bestaande partitie om te gebruiken" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Gebruik de Windows partitie voor loopback " #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Welke partitie wenst u te gebruiken voor Linux4Win?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Kies de grootte" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Root-partitie-grootte in MB:" #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Swap-partitie-grootte in MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Er is geen FAT-partitie om als loopback te gebruiken (of er is te weinig " "ruimte over)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Van welke partitie wilt u de grootte veranderen?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "De FAT grootte-aanpasser was niet instaat met uw partitie om te gaan, \n" "de volgende fout is opgetreden: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Bezig met berekenen grootte van Windows-partitie" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" "Uw Windows-partitie is te gefragmenteerd. Start uw computer opnieuw op onder " "Windows, gebruik het ``defrag''-hulpprogramma, en herstart vervolgens de " "installatie van Mandrakelinux." #: install_interactive.pm:164 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "WAARSCHUWING!\n" "\n" "DrakX zal nu de grootte van uw Windows-partitie aanpassen. Wees\n" "voorzichtig: deze operatie is gevaarlijk. Als u dit niet reeds\n" "gedaan heeft, dient u eerst de installatie af te breken, \n" "\"chkdsk c:\" uit te voeren vanuit een Opdrachtaanwijzing onder\n" "Windows (kijk uit, het draaien van het grafische programma \"scandisk\"\n" "is niet genoeg, zorg ervoor dat u \"chkdsk\" in een opdrachtaanwijzing\n" "gebruikt!), eventueel defrag uit te voeren, en daarna de\n" "installatie opnieuw te starten. Maakt u ook een reservekopie\n" "van uw gegevens.\n" "Wanneer u zeker van uw zaak bent, klik dan OK." #: install_interactive.pm:176 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Welke grootte wilt u behouden voor Windows op" #: install_interactive.pm:177 #, c-format msgid "partition %s" msgstr "partitie %s" #: install_interactive.pm:186 #, c-format msgid "Resizing Windows partition" msgstr "Bezig met grootte aanpassen van Windows-partitie" #: install_interactive.pm:191 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT grootte-aanpassing mislukt: %s" #: install_interactive.pm:206 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Er is geen FAT partitie om de grootte van aan te passen (of er is te weinig " "ruimte over)" #: install_interactive.pm:211 #, c-format msgid "Remove Windows(TM)" msgstr "Windows(TM) verwijderen" #: install_interactive.pm:213 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "U heeft meer dan één harde schijf, op welke wilt u Linux installeren?" #: install_interactive.pm:217 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "ALLE bestaande partities en de gegevens die ze bevatten, zullen verloren " "gaan op schijf %s" #: install_interactive.pm:230 #, c-format msgid "Use fdisk" msgstr "fdisk gebruiken" #: install_interactive.pm:233 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "U kunt nu uw schijf %s partitioneren.\n" "Vergeet niet op te slaan met `w' wanneer u klaar bent." #: install_interactive.pm:269 #, c-format msgid "I can't find any room for installing" msgstr "Er is geen ruimte meer voor installatie" #: install_interactive.pm:273 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "De partitionerings-wizard heeft de volgende oplossingen gevonden:" #: install_interactive.pm:279 #, c-format msgid "Partitioning failed: %s" msgstr "Partitionering mislukt: %s" #: install_interactive.pm:286 #, c-format msgid "Bringing up the network" msgstr "Bezig met opstarten van het netwerk" #: install_interactive.pm:291 #, c-format msgid "Bringing down the network" msgstr "Bezig met stoppen van het netwerk" #: install_messages.pm:9 #, fuzzy, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Introductie\n" "\n" "Het besturingssysteem en de verschillende componenten beschikbaar in de " "Mandrakelinux\n" "distributie zullen vanaf nu \" Software Produkten\" heten. De Software " "Produkten omvatten,\n" "maar zijn niet beperkt tot de programma's, methoden, regels en documentatie " "gerelateerd aan\n" "het besturingssysteem en de verschillende onderdelen van de Mandrakelinux " "distributie.\n" "\n" "\n" "1. Licentieovereenkomst\n" "\n" "Lees dit document zorgvuldig. Dit document is een licentieovereenkomst " "tussen U en\n" "MandrakeSoft S.A. welke van toepassing is op de Software Produkten.\n" "Door het installeren, dupliceren of gebruiken van de Software Produkten in " "welke vorm dan ook,\n" "gaat u expliciet akkoord en bent het volledig eens met de bewoording en " "voorwaarden van deze\n" "licentie. Indien U het met welk onderdeel van de Licentie dan ook niet eens " "bent, dan is het U\n" "niet toegestaan deze Software Produkten te installeren, dupliceren of " "gebruiken.\n" "Elke poging om de Software Produkten te installeren, dupliceren of gebruiken " "op een wijze die\n" "niet in overeenstemming is met de bewoording en voorwaarden van deze " "licentie is nietig\n" "en beëindigt uw rechten onder deze Licentie. Bij beëindiging van de Licentie " "dient u onmiddelijk\n" "alle kopieën van de Software Produkten te vernietigen.\n" "\n" "\n" "2. Beperkte garantie\n" "\n" "De Software Produkten en meegeleverde documentatie zijn geleverd zoals ze " "zijn zonder garantie,\n" "voorzover dat dat wettelijk is toegestaan.\n" "MandrakeSoft S.A. zal in geen enkele omstandigheid, en voorzover dat " "wettelijk is toegestaan,\n" "aansprakelijk zijn voor elke vorm van speciale, incidentele, directe of " "indirecte schade (inclusief\n" "zonder beperking schade door verlies van zaken, interruptie van zaken, " "financieel verlies, juridische\n" "kosten en boetes resulterend uit een rechterlijke uitspraak, of andere " "daaruit volgende verliezen)\n" "veroorzaakt door het gebruik of het niet kunnen gebruiken van de Software " "Produkten, zelfs als\n" "MandrakeSoft S.A. op de hoogte was van de mogelijkheid danwel voorkomen van " "dergelijke schades.\n" "\n" "BEPERKTE AANSPRAKELIJKHEID GEKOPPELD AAN HET BEZIT OF GEBRUIK VAN\n" "VERBODEN SOFTWARE IN SOMMIGE LANDEN\n" "\n" "MandrakeSoft S.A. of zijn distributeurs zullen, voorzover wettelijk " "toegestaan, in geen geval aansprakelijk\n" "zijn voor welke vorm van speciale, incidentele, directe of indirecte schade " "dan ook (inclusief\n" "zonder beperking schade door verlies van zaken, interruptie van zaken, " "financieel verlies, juridische\n" "kosten en boetes resulterend uit een rechterlijke uitspraak, of andere " "daaruit volgende verliezen)\n" "voortkomend uit het bezit of gebruik van softwarecomponenten of voortkomend " "uit het downloaden van\n" "softwarecomponenten van één van Mandrakelinux sites, welke verboden of " "beperkt zijn in sommige\n" "landen door lokale wetgeving.\n" "Deze beperkte aansprakelijkheid geldt voor, maar is niet beperkt tot de " "sterke versleutelingscomponenten\n" "meegeleverd met de Software Produkten.\n" "\n" "\n" "3. De GPL-licentie en gerelateerde licenties\n" "\n" "De Software Produkten bestaan uit componenten die ontwikkeld zijn door " "verschillende personen\n" "of entiteiten. De meeste componenten vallen onder de bewoording en " "voorwaarden van de GNU \n" "General Public License, hierna te noemen \"GPL\", of onder vergelijkbare " "licenties. De meeste van\n" "deze licenties staan u toe de desbetreffende componenten te gebruiken, " "dupliceren, aanpassen of\n" "verder te distribueren. Leest u aandachtig de bewoording en voorwaarden van " "deze licentieovereenkomsten\n" "alvorens enige component te gebruiken. Elke vraag over een componentlicentie " "kunt U richten aan de\n" "desbetreffende auteur en niet aan MandrakeSoft S.A.\n" "De programmatuur ontwikkeld door MandrakeSoft S.A. valt onder de GPL-" "licentie. Documentatie\n" "geschreven door MandrakeSoft S.A. valt onder een eigen licentie. Zie de " "documentatie voor verdere details.\n" "\n" "\n" "4. Intellectuele eigendomsrechten\n" "\n" "Alle rechten op de componenten van de Software Produkten behoren toe aan hun " "respectievelijke\n" "auteurs en zijn beschermd door intellectuele eigendoms- en copyright-wetten " "welke gelden voor\n" "computerprogrammatuur.\n" "MandrakeSoft S.A. behoudt zich het recht voor om de Software Produkten te " "veranderen in hun geheel\n" "of in onderdelen, op welke manier dan ook en voor welk doel dan ook.\n" "\"Mandrake\", \"Mandrakelinux\" en geassocieerde logo's zijn handelsmerken " "van MandrakeSoft S.A.\n" "\n" "\n" "5. Geldende wetten\n" "\n" "Als welk deel dan ook van deze overeenkomst niet geldig, illegaal of niet " "toepasselijk wordt\n" "bevonden door een rechterlijke uitspraak, dan wordt het betreffende deel " "uitgesloten van dit\n" "contract. U blijft verder wel gebonden aan de overige toepasselijke secties " "van de overeenkomst.\n" "De bewoording en voorwaarden van deze licentie vallen onder de wetten van " "Frankrijk.\n" "Alle meningsverschillen ten aanzien van deze licentie worden het liefst " "buiten een rechtszaak om\n" "geschikt. Als een laatste oplossing kan de zaak doorverwezen worden naar de " "geschikte\n" "gerechtshoven van Parijs - Frankrijk.\n" "Bij vragen over dit document, gelieve contact op te nemen met MandrakeSoft S." "A.\n" "\n" "Dit document is vanuit het Engels vertaald door een onbeëdigde vertaler. " "Voor het rechtsgeldig\n" "laten maken van dit document zult U dus een originele versie van dit " "document op moeten halen\n" "en deze laten vertalen door een beëdigd vertaler.\n" #: install_messages.pm:89 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Waarschuwing: Vrije Software is niet altijd vrij van patenten, en sommige\n" "van de meegeleverde software zou onder patenten kunnen vallen die gelden\n" "in uw land. Bijvoorbeeld de meegeleverde MP3-decoders zouden een licentie\n" "kunnen vereisen voordat ze gebruikt mogen worden (zie \n" "http://www.mp3licensing.com voor verdere details). Indien u onzeker bent\n" "of een patent op u toepasbaar is, raadpleeg dan uw lokale wetgeving." #: install_messages.pm:96 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Waarschuwing\n" "\n" "Leest u aandachtig de voorwaarden hieronder. Als u het niet eens bent \n" "met eender welk onderdeel, is het u niet toegestaan om de volgende \n" "CD-media te installeren. Klik op 'Weigeren' om de installatie voort te \n" "zetten zonder deze media te gebruiken.\n" "\n" "\n" "Sommige componenten die op de volgende CD-media staan staan niet \n" "onder de GPL-licentie of dergelijke overeenkomsten. Ieder van deze \n" "componenten valt onder de regels en voorwaarden van zijn eigen \n" "specifieke licentie. Leest u dergelijke licenties alstublieft aandachtig \n" "en ga ermee akkoord voordat u de genoemde componenten gebruikt \n" "of opnieuw distribueert. \n" "Dergelijke licenties zullen in het algemeen het overnemen, dupliceren \n" "(behalve voor reservekopie-doeleinden), herdistribueren, reverse \n" "engineering, de-assemblage, de-compilatie of aanpassing van het \n" "component voorkomen. Het doorbreken van deze overeenkomst zal \n" "onmiddelijk uw rechten onder de specifieke licentie opheffen. Tenzij \n" "de specifieke licentie u zulke rechten toekent, kunt u in het algemeen \n" "de programma's niet op meer dan één machine installeren, of hen \n" "aanpassen voor gebruik over een netwerk. Als u twijfelt, neem dan \n" "alstublieft rechtstreeks contact op met de distributeur van het \n" "component. \n" "Het doorgeven aan een derde partij of het kopiëren van dergelijke \n" "componenten is in het algemeen verboden.\n" "\n" "\n" "Alle rechten op de componenten van de volgende CD-media behoren \n" "aan hun respectievelijke auteurs en zijn beschermd door wetten met \n" "betrekking tot intellectueel eigendom en copyright van software- \n" "programma's. \n" #: install_messages.pm:128 #, fuzzy, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" "Gefeliciteerd, de installatie is voltooid. \n" "Verwijder de opstartmedia en druk op Enter om opnieuw op te starten.\n" "\n" "\n" "Voor informatie over verbeteringen die voor deze versie van Mandrakelinux\n" "beschikbaar zijn, raadpleegt u de Errata, beschikbaar van:\n" "\n" "\n" "%s\n" "\n" "Informatie over het configureren van uw systeem is beschikbaar in het\n" "\"post install\"-hoofdstuk van de Official Mandrakelinux User's Guide." #: install_messages.pm:141 #, fuzzy, c-format msgid "http://www.mandrakelinux.com/en/100errata.php3" msgstr "http://www.mandrakelinux.com/nl/90errata.php3" #: install_steps.pm:241 #, c-format msgid "Duplicate mount point %s" msgstr "Dubbel koppelpunt %s" #: install_steps.pm:406 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Sommige belangrijke pakketen werden niet juist\n" "geïnstalleerd. Of uw CD-ROM-speler of uw CD-ROM is defect.\n" "Controleer de cdrom op een geïnstalleerde computer met\n" "\"rpm -qpl Mandrake/RPMS/*.rpm\"\n" #: install_steps.pm:535 #, c-format msgid "No floppy drive available" msgstr "Geen diskettestation beschikbaar" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Overgang naar stap `%s'\n" #: install_steps_gtk.pm:178 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Uw systeem heeft weinig bronnen beschikbaar. U zou problemen kunnen\n" "ondervinden bij het installeren van Mandrakelinux. Als dit gebeurt,\n" "kunt u een tekstinstallatie proberen. Om dit te doen, drukt u op `F1'\n" "terwijl de CDROM opstart, en dan voert u `text' in." #: install_steps_gtk.pm:232 install_steps_interactive.pm:587 #, c-format msgid "Package Group Selection" msgstr "Pakketgroep-selectie" #: install_steps_gtk.pm:292 install_steps_interactive.pm:519 #, c-format msgid "Total size: %d / %d MB" msgstr "Totale grootte: %d / %d MB" #: install_steps_gtk.pm:338 #, c-format msgid "Bad package" msgstr "Onbruikbaar pakket" #: install_steps_gtk.pm:340 #, c-format msgid "Version: " msgstr "Versie: " #: install_steps_gtk.pm:341 #, c-format msgid "Size: " msgstr "Grootte: " #: install_steps_gtk.pm:341 #, c-format msgid "%d KB\n" msgstr "%d kB\n" #: install_steps_gtk.pm:342 #, c-format msgid "Importance: " msgstr "Belang: " #: install_steps_gtk.pm:375 #, c-format msgid "You can't select/unselect this package" msgstr "U kunt dit pakket niet (de)selecteren" #: install_steps_gtk.pm:379 #, c-format msgid "due to missing %s" msgstr "ten gevolge van ontbrekende %s" #: install_steps_gtk.pm:380 #, c-format msgid "due to unsatisfied %s" msgstr "ten gevolge van onvoldane %s" # Wat wordt hier precies bedoeld? #: install_steps_gtk.pm:381 #, c-format msgid "trying to promote %s" msgstr "proberen om %s te promoveren" #: install_steps_gtk.pm:382 #, c-format msgid "in order to keep %s" msgstr "om %s te kunnen behouden" #: install_steps_gtk.pm:387 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "U kunt dit pakket niet selecteren omdat er te weinig ruimte over is om het " "te installeren" #: install_steps_gtk.pm:390 #, c-format msgid "The following packages are going to be installed" msgstr "De volgende pakketten zullen geïnstalleerd worden" #: install_steps_gtk.pm:391 #, c-format msgid "The following packages are going to be removed" msgstr "De volgende pakketten zullen gedeïnstalleerd worden" #: install_steps_gtk.pm:415 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Dit is een verplicht pakket, het kan niet gedeselecteerd worden" #: install_steps_gtk.pm:417 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "U kunt dit pakket niet deselecteren. Het is al geïnstalleerd." #: install_steps_gtk.pm:420 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Dit pakket moet opgewaardeerd worden.\n" "Weet u zeker dat u het wilt deselecteren?" #: install_steps_gtk.pm:423 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "U kunt dit pakket niet deselecteren. Het moet opgewaardeerd worden." #: install_steps_gtk.pm:428 #, c-format msgid "Show automatically selected packages" msgstr "Automatisch geselecteerde pakketten tonen" #: install_steps_gtk.pm:433 #, c-format msgid "Load/Save on floppy" msgstr "Laden/opslaan op diskette" #: install_steps_gtk.pm:434 #, c-format msgid "Updating package selection" msgstr "Verversen van pakket-selectie" #: install_steps_gtk.pm:439 #, c-format msgid "Minimal install" msgstr "Minimale installatie" #: install_steps_gtk.pm:453 install_steps_interactive.pm:427 #, c-format msgid "Choose the packages you want to install" msgstr "Kies de pakketten die u wenst te installeren" #: install_steps_gtk.pm:469 install_steps_interactive.pm:673 #, c-format msgid "Installing" msgstr "Bezig met installeren" #: install_steps_gtk.pm:475 #, c-format msgid "No details" msgstr "Geen details" #: install_steps_gtk.pm:476 #, c-format msgid "Estimating" msgstr "Schatting is gaande" #: install_steps_gtk.pm:482 #, c-format msgid "Time remaining " msgstr "Tijd over " #: install_steps_gtk.pm:494 #, c-format msgid "Please wait, preparing installation..." msgstr "Bezig met voorbereiden van installatie, even geduld alstublieft" #: install_steps_gtk.pm:555 #, c-format msgid "%d packages" msgstr "%d pakketten" #: install_steps_gtk.pm:560 #, c-format msgid "Installing package %s" msgstr "Bezig met installeren van pakket %s" #: install_steps_gtk.pm:596 install_steps_interactive.pm:88 #: install_steps_interactive.pm:697 #, c-format msgid "Refuse" msgstr "Weigeren" #: install_steps_gtk.pm:597 install_steps_interactive.pm:698 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Verwissel uw CD-ROM!\n" "\n" "Gelieve de CD-ROM met de naam \"%s\" in uw station te plaatsen en Ok te " "kiezen wanneer u klaar bent.\n" "Als u deze CD niet heeft, klik dan Annuleren om verdere installatie vanaf " "deze CD te vermijden." #: install_steps_gtk.pm:612 install_steps_interactive.pm:710 #, c-format msgid "There was an error ordering packages:" msgstr "Er is een fout opgetreden bij het sorteren van de pakketten:" #: install_steps_gtk.pm:612 install_steps_gtk.pm:616 #: install_steps_interactive.pm:710 install_steps_interactive.pm:714 #, c-format msgid "Go on anyway?" msgstr "Toch verdergaan?" #: install_steps_gtk.pm:616 install_steps_interactive.pm:714 #, c-format msgid "There was an error installing packages:" msgstr "Er is een fout opgetreden bij het installeren van de pakketten:" #: install_steps_gtk.pm:656 install_steps_interactive.pm:882 #: install_steps_interactive.pm:1034 #, c-format msgid "not configured" msgstr "niet geconfigureerd" #: install_steps_interactive.pm:81 #, c-format msgid "Do you want to recover your system?" msgstr "Wenst u uw systeem te herstellen?" #: install_steps_interactive.pm:82 #, c-format msgid "License agreement" msgstr "Licentie overeenkomst" #: install_steps_interactive.pm:111 #, c-format msgid "Please choose your keyboard layout." msgstr "Gelieve uw toetsenbord-layout te kiezen." #: install_steps_interactive.pm:113 #, c-format msgid "Here is the full list of keyboards available" msgstr "Dit is de volledige lijst van beschikbare toetsenborden" #: install_steps_interactive.pm:143 #, c-format msgid "Install/Upgrade" msgstr "Installatie/Opwaardering" #: install_steps_interactive.pm:144 #, c-format msgid "Is this an install or an upgrade?" msgstr "Is dit een installatie of een opwaardering?" #: install_steps_interactive.pm:150 #, c-format msgid "Upgrade %s" msgstr "%s opwaarderen" #: install_steps_interactive.pm:160 #, c-format msgid "Encryption key for %s" msgstr "Vercijferingssleutel voor %s" #: install_steps_interactive.pm:177 #, c-format msgid "Please choose your type of mouse." msgstr "Kies uw type muis." #: install_steps_interactive.pm:186 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Muispoort" #: install_steps_interactive.pm:187 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Met welke seriële poort is uw muis verbonden?" #: install_steps_interactive.pm:197 #, c-format msgid "Buttons emulation" msgstr "Muisknoppen nadoen" #: install_steps_interactive.pm:199 #, c-format msgid "Button 2 Emulation" msgstr "Nadoen van knop 2" #: install_steps_interactive.pm:200 #, c-format msgid "Button 3 Emulation" msgstr "Nadoen van knop 3" #: install_steps_interactive.pm:221 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:221 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Bezig met configureren van PCMCIA-kaarten..." #: install_steps_interactive.pm:228 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:228 #, c-format msgid "Configuring IDE" msgstr "IDE-Configuratie" #: install_steps_interactive.pm:248 network/tools.pm:195 #, c-format msgid "No partition available" msgstr "Geen beschikbare partities" #: install_steps_interactive.pm:251 #, c-format msgid "Scanning partitions to find mount points" msgstr "Bezig met scannen van partities om koppelpunten te vinden" #: install_steps_interactive.pm:258 #, c-format msgid "Choose the mount points" msgstr "Selecteer de koppelpunten" #: install_steps_interactive.pm:288 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Er is geen vrije ruimte voor een \"bootstrap\" van 1MB! De installatie zal " "doorgaan, maar om uw systeem op te starten zult u de bootstrap partitie in " "DiskDrake moeten creëren." #: install_steps_interactive.pm:325 #, c-format msgid "Choose the partitions you want to format" msgstr "Kies de partities die u wenst te formatteren" #: install_steps_interactive.pm:327 #, c-format msgid "Check bad blocks?" msgstr "Slechte blocks checken?" #: install_steps_interactive.pm:359 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Het controleren van bestandssysteem %s is mislukt. Wilt u de fouten " "repareren? (Let op, gegevensverlies is mogelijk)" #: install_steps_interactive.pm:362 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Niet genoeg swap voor de installatie, voeg er wat toe" #: install_steps_interactive.pm:369 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" "Bezig met zoeken naar beschikbare pakketten en opnieuw aanmaken van de rpm " "database..." #: install_steps_interactive.pm:370 install_steps_interactive.pm:389 #, c-format msgid "Looking for available packages..." msgstr "Bezig met zoeken naar beschikbare pakketten" #: install_steps_interactive.pm:373 #, c-format msgid "Looking at packages already installed..." msgstr "Bezig met zoeken naar reeds geïnstalleerde pakketten..." #: install_steps_interactive.pm:377 #, c-format msgid "Finding packages to upgrade..." msgstr "Bezig met zoeken naar pakketten om op te waarderen" #: install_steps_interactive.pm:398 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Uw systeem heeft niet genoeg ruimte over voor installatie of opwaardering (%" "d > %d)" #: install_steps_interactive.pm:439 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Gelieve te kiezen of u de pakketselectie wilt laden of opslaan op diskette.\n" "Het formaat is dezelfde als de met auto_install gegenereerde diskettes." #: install_steps_interactive.pm:441 #, c-format msgid "Load from floppy" msgstr "Laden van diskette" #: install_steps_interactive.pm:441 #, c-format msgid "Save on floppy" msgstr "Schrijven naar floppy" #: install_steps_interactive.pm:445 #, c-format msgid "Package selection" msgstr "Pakket-selectie" #: install_steps_interactive.pm:445 #, c-format msgid "Loading from floppy" msgstr "Bezig met het laden van diskette" #: install_steps_interactive.pm:450 #, c-format msgid "Insert a floppy containing package selection" msgstr "Plaats een diskette met de pakket-selectie in diskettestation" #: install_steps_interactive.pm:533 #, c-format msgid "" "Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n" "tests, the 2.4 series kernel will be installed as the default to insure\n" "compliance under the \"LSB\" group selection." msgstr "" "Vanwege incompatibiliteiten van de kernel 2.6-serie met de LSB-runtime\n" "tests, zal een kernel uit de 2.4-serie geïnstalleerd worden als standaard\n" "om te verzekeren dat er voldaan wordt aan de \"LSB\" groepsselectie." #: install_steps_interactive.pm:540 #, c-format msgid "Selected size is larger than available space" msgstr "De geselecteerde grootte is meer dan de beschikbare ruimte" #: install_steps_interactive.pm:555 #, c-format msgid "Type of install" msgstr "Type installatie" #: install_steps_interactive.pm:556 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "U heeft geen enkele pakketgroep geselecteerd\n" "Gelieve de minimale installatie die u wenst te kiezen." #: install_steps_interactive.pm:560 #, c-format msgid "With basic documentation (recommended!)" msgstr "Met basis-documentatie (aanbevolen!)" #: install_steps_interactive.pm:561 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Werkelijk minimale installatie (in het bijzonder geen urpmi)" #: install_steps_interactive.pm:604 standalone/drakxtv:53 #, c-format msgid "All" msgstr "Alles" #: install_steps_interactive.pm:648 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Als u alle CDs in de lijst hierboven heeft, klik dan Ok.\n" "Als u geen enkele van die CDs heeft, klik dan Annuleren.\n" "Als maar enkele CDs zoek zijn, deselecteer ze dan, en klik Ok." #: install_steps_interactive.pm:653 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "CD-ROM genaamd \"%s\"" #: install_steps_interactive.pm:673 #, c-format msgid "Preparing installation" msgstr "Bezig met voorbereiden van installatie" #: install_steps_interactive.pm:682 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Bezig met installeren van pakket %s\n" "%d%%" #: install_steps_interactive.pm:728 #, c-format msgid "Post-install configuration" msgstr "Configuratie na installatiestap" #: install_steps_interactive.pm:734 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Plaats de gebruikte Opstartdiskette in station %s alstublieft" #: install_steps_interactive.pm:740 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Plaats de \"Modules Vernieuwen\"-diskette in station %s" #: install_steps_interactive.pm:761 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "U bent nu in de gelegenheid om bijgewerkte pakketten te downloaden.\n" "Deze pakketten zijn vernieuwd nadat de distributie werd uitgegeven.\n" "Ze kunnen beveiligings- of programmafoutreparaties bevatten.\n" "U heeft een werkende internetverbinding nodig om deze pakketten te \n" "downloaden.\n" "\n" "Wenst u de bijgewerkte pakketten te installeren?" #: install_steps_interactive.pm:782 #, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "" "Bezig te verbinden met de Mandrakelinux-website om de lijst met beschikbare " "mirrors op te halen..." #: install_steps_interactive.pm:787 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Kies een `mirror' om de pakketten van af te halen" #: install_steps_interactive.pm:801 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Bezig met verbinden met de mirror om de lijst met beschikbare pakketten op " "te halen..." #: install_steps_interactive.pm:805 #, c-format msgid "Unable to contact mirror %s" msgstr "Verbinden met mirror %s is onmogelijk" #: install_steps_interactive.pm:805 #, c-format msgid "Would you like to try again?" msgstr "Wilt u het opnieuw proberen?" #: install_steps_interactive.pm:831 standalone/drakclock:42 #, c-format msgid "Which is your timezone?" msgstr "Wat is uw tijdzone?" #: install_steps_interactive.pm:836 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Automatische tijdssynchronisatie (met gebruik van NTP)" #: install_steps_interactive.pm:844 #, c-format msgid "NTP Server" msgstr "NTP-server" #: install_steps_interactive.pm:886 steps.pm:30 #, c-format msgid "Summary" msgstr "Overzicht" #: install_steps_interactive.pm:899 install_steps_interactive.pm:907 #: install_steps_interactive.pm:925 install_steps_interactive.pm:932 #: install_steps_interactive.pm:1081 services.pm:135 #: standalone/drakbackup:1663 #, c-format msgid "System" msgstr "Systeem" #: install_steps_interactive.pm:939 install_steps_interactive.pm:966 #: install_steps_interactive.pm:983 install_steps_interactive.pm:999 #: install_steps_interactive.pm:1010 #, c-format msgid "Hardware" msgstr "Apparatuur" #: install_steps_interactive.pm:945 install_steps_interactive.pm:954 #, c-format msgid "Remote CUPS server" msgstr "Netwerk CUPS server" #: install_steps_interactive.pm:945 #, c-format msgid "No printer" msgstr "Geen printer" #: install_steps_interactive.pm:987 #, c-format msgid "Do you have an ISA sound card?" msgstr "Heeft u een ISA geluidskaart?" #: install_steps_interactive.pm:989 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "\"sndconfig\" na de installatie uitvoeren om uw geluidskaart te configureren" #: install_steps_interactive.pm:991 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "Geen geluidskaart bespeurd. Probeer \"harddrake\" na de installatie" #: install_steps_interactive.pm:1011 #, c-format msgid "Graphical interface" msgstr "Grafische interface" #: install_steps_interactive.pm:1017 install_steps_interactive.pm:1032 #, c-format msgid "Network & Internet" msgstr "Netwerk & Internet" #: install_steps_interactive.pm:1033 #, c-format msgid "Proxies" msgstr "Proxy's" #: install_steps_interactive.pm:1034 #, c-format msgid "configured" msgstr "geconfigureerd" #: install_steps_interactive.pm:1043 install_steps_interactive.pm:1057 #: steps.pm:20 #, c-format msgid "Security" msgstr "Veiligheid" #: install_steps_interactive.pm:1062 #, c-format msgid "activated" msgstr "geactiveerd" #: install_steps_interactive.pm:1062 #, c-format msgid "disabled" msgstr "uitgeschakeld" #: install_steps_interactive.pm:1071 #, c-format msgid "Boot" msgstr "Opstarten" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1075 #, c-format msgid "%s on %s" msgstr "%s op %s" #: install_steps_interactive.pm:1086 services.pm:177 #, c-format msgid "Services: %d activated for %d registered" msgstr "Diensten: %d geactiveerd van %d geregistreerd" #: install_steps_interactive.pm:1096 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "U heeft X niet geconfigureerd. Weet u zeker dat u dit wilt?" #: install_steps_interactive.pm:1154 #, c-format msgid "Set root password and network authentication methods" msgstr "Root-wachtwoord en methodes voor netwerk-aanmeldingscontrole instellen" #: install_steps_interactive.pm:1155 #, c-format msgid "Set root password" msgstr "Rootwachtwoord instellen" #: install_steps_interactive.pm:1165 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Dit wachtwoord is te makkelijk (moet tenminste %d tekens lang zijn)" #: install_steps_interactive.pm:1170 network/netconnect.pm:563 #: standalone/drakauth:26 standalone/drakconnect:451 #, c-format msgid "Authentication" msgstr "Aanmeldingscontrole" #: install_steps_interactive.pm:1201 #, c-format msgid "Preparing bootloader..." msgstr "Klaarmaken van opstartlader..." #: install_steps_interactive.pm:1211 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "Het heeft er alle schijn van dat u een OldWorld-\n" " of Onbekende machine heeft. De yaboot opstartlader \n" " zal voor u niet werken.\n" "De installatie zal doorgaan, maar u zult BootX of \n" "een andere methode nodig hebben om uw machine op te starten" #: install_steps_interactive.pm:1217 #, c-format msgid "Do you want to use aboot?" msgstr "Wenst u aboot te gebruiken?" #: install_steps_interactive.pm:1220 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Fout bij het installeren van aboot,\n" "toch proberen te installeren, zelfs als dat de eerste partitie vernietigt?" #: install_steps_interactive.pm:1231 #, c-format msgid "Installing bootloader" msgstr "Bezig met opstart-lader installeren" #: install_steps_interactive.pm:1238 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" "De installatie van de opstartlader is mislukt. De volgende fout werd " "gevonden:" #: install_steps_interactive.pm:1243 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Wellicht is het nodig om uw Open Firmware opstart-apparaat \n" " te veranderen om de opstartlader te activeren. Wanneer u geen \n" " opstartlader-prompt bij het opnieuw opstarten ziet, houdt dan \n" " Command-Option-O-F ingedrukt bij het opstarten en voer in: \n" " setenv boot-device %s,\\\\:tbxi\n" " Vervolgens voert u in: shut-down\n" "Bij de volgende keer opstarten zou u dan de opstartlader-prompt \n" "moeten zien." #: install_steps_interactive.pm:1256 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "In dit beveiligingsniveau wordt toegang tot de bestanden op de Windows-" "partitie voorbehouden aan de systeembeheerder." #: install_steps_interactive.pm:1288 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Plaats een lege floppy in station %s" #: install_steps_interactive.pm:1293 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Plaats een andere diskette voor de stuurprogramma's alstublieft" #: install_steps_interactive.pm:1295 #, c-format msgid "Creating auto install floppy..." msgstr "Aanmaken van auto-installatiediskette..." #: install_steps_interactive.pm:1307 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Sommige stappen zijn nog niet voltooid.\n" "\n" "Weet u zeker dat u op dit moment wilt afsluiten?" #: install_steps_interactive.pm:1322 #, c-format msgid "Generate auto install floppy" msgstr "Auto-installatiediskette aanmaken" #: install_steps_interactive.pm:1324 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Desgewenst kan de auto-installatie volledig geautomatiseerd worden,\n" "in dat geval zal het de harde schijf overnemen!\n" "(Deze functie is bedoeld voor het installeren op een andere machine.)\n" "\n" "Wellicht geeft u de voorkeur aan het herhalen van de installatie.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Mandrakelinux installatie %s" #: install_steps_newt.pm:33 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / tussen elementen | selecteert | volgend " "scherm " #: interactive.pm:170 #, c-format msgid "Choose a file" msgstr "Kies een bestand" #: interactive.pm:372 #, c-format msgid "Basic" msgstr "Basis" #: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:510 #, c-format msgid "Finish" msgstr "Klaar" #: interactive/newt.pm:83 #, c-format msgid "Do" msgstr "Doe het" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Ongeldige keuze, probeer nog eens\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Uw keuze? (standaard %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Waarden die u dient in te vullen:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Uw keuze? (0/1, standaard '%s')" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Knop '%s':%s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Wilt u op deze knop klikken?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Uw keuze? (standaard '%s'%s)" #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " voor `void' in voor void ingang" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Er zijn vele keuzes mogelijk (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Gelieve het eerste nummer van het 10-bereik dat u wilt bewerken,\n" "te kiezen, of geef eenvoudigweg Enter om verder te gaan.\n" "Uw keuze?" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Let op, een label is veranderd:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Opnieuw invoeren" #: keyboard.pm:137 keyboard.pm:169 #, c-format msgid "Czech (QWERTZ)" msgstr "Tsjechisch (QWERTZ)" #: keyboard.pm:138 keyboard.pm:171 #, c-format msgid "German" msgstr "Duits" #: keyboard.pm:139 #, c-format msgid "Dvorak" msgstr "Dvorak" #: keyboard.pm:140 keyboard.pm:179 #, c-format msgid "Spanish" msgstr "Spaans" #: keyboard.pm:141 keyboard.pm:180 #, c-format msgid "Finnish" msgstr "Fins" #: keyboard.pm:142 keyboard.pm:181 #, c-format msgid "French" msgstr "Frans" #: keyboard.pm:143 keyboard.pm:220 #, c-format msgid "Norwegian" msgstr "Noors" #: keyboard.pm:144 #, c-format msgid "Polish" msgstr "Pools" #: keyboard.pm:145 keyboard.pm:229 #, c-format msgid "Russian" msgstr "Russisch" #: keyboard.pm:147 keyboard.pm:233 #, c-format msgid "Swedish" msgstr "Zweeds" #: keyboard.pm:148 keyboard.pm:252 #, c-format msgid "UK keyboard" msgstr "UK toetsenbord" #: keyboard.pm:149 keyboard.pm:253 #, c-format msgid "US keyboard" msgstr "US toetsenbord" #: keyboard.pm:151 #, c-format msgid "Albanian" msgstr "Albanees" #: keyboard.pm:152 #, c-format msgid "Armenian (old)" msgstr "Armeens (oud)" #: keyboard.pm:153 #, c-format msgid "Armenian (typewriter)" msgstr "Armeens (typmachine)" #: keyboard.pm:154 #, c-format msgid "Armenian (phonetic)" msgstr "Armeens (fonetisch)" #: keyboard.pm:155 #, c-format msgid "Arabic" msgstr "Arabisch" #: keyboard.pm:156 #, c-format msgid "Azerbaidjani (latin)" msgstr "Azerbeidzjan (latin)" #: keyboard.pm:158 #, c-format msgid "Belgian" msgstr "Belgisch" #: keyboard.pm:159 #, c-format msgid "Bengali" msgstr "Bengali" #: keyboard.pm:160 #, c-format msgid "Bulgarian (phonetic)" msgstr "Bulgaars (fonetisch)" #: keyboard.pm:161 #, c-format msgid "Bulgarian (BDS)" msgstr "Bulgaars (BDS)" #: keyboard.pm:162 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Braziliaans (ABNT-2)" #: keyboard.pm:165 #, c-format msgid "Bosnian" msgstr "Bosnisch" #: keyboard.pm:166 #, c-format msgid "Belarusian" msgstr "Belarusiaans" #: keyboard.pm:167 #, c-format msgid "Swiss (German layout)" msgstr "Zwitsers (Duitse layout)" #: keyboard.pm:168 #, c-format msgid "Swiss (French layout)" msgstr "Zwitsers (Franse layout)" #: keyboard.pm:170 #, c-format msgid "Czech (QWERTY)" msgstr "Tsjechisch (QWERTY)" #: keyboard.pm:172 #, c-format msgid "German (no dead keys)" msgstr "Duits (geen dode toetsen)" #: keyboard.pm:173 #, c-format msgid "Devanagari" msgstr "Devanagari" #: keyboard.pm:174 #, c-format msgid "Danish" msgstr "Deens" #: keyboard.pm:175 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (US)" #: keyboard.pm:176 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Noorwegen)" #: keyboard.pm:177 #, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (Zweeds)" #: keyboard.pm:178 #, c-format msgid "Estonian" msgstr "Ests" #: keyboard.pm:182 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Georgisch (\"Russische\" layout)" #: keyboard.pm:183 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Georgisch (\"Latin\" layout)" #: keyboard.pm:184 #, c-format msgid "Greek" msgstr "Grieks" #: keyboard.pm:185 #, c-format msgid "Greek (polytonic)" msgstr "Grieks (polytoon)" #: keyboard.pm:186 #, c-format msgid "Gujarati" msgstr "Gujarati" #: keyboard.pm:187 #, c-format msgid "Gurmukhi" msgstr "Gurmukhi" #: keyboard.pm:188 #, c-format msgid "Hungarian" msgstr "Hongaars" #: keyboard.pm:189 #, c-format msgid "Croatian" msgstr "Kroatisch" #: keyboard.pm:190 #, c-format msgid "Irish" msgstr "Iers" #: keyboard.pm:191 #, c-format msgid "Israeli" msgstr "Israelisch" #: keyboard.pm:192 #, c-format msgid "Israeli (Phonetic)" msgstr "Israelisch (Fonetisch)" #: keyboard.pm:193 #, c-format msgid "Iranian" msgstr "Iraans" #: keyboard.pm:194 #, c-format msgid "Icelandic" msgstr "IJslands" #: keyboard.pm:195 #, c-format msgid "Italian" msgstr "Italiaans" #: keyboard.pm:196 #, c-format msgid "Inuktitut" msgstr "Inuktitut" #: keyboard.pm:200 #, c-format msgid "Japanese 106 keys" msgstr "Japans 106 toetsen" #: keyboard.pm:201 #, c-format msgid "Kannada" msgstr "Kannada" #: keyboard.pm:204 #, c-format msgid "Korean keyboard" msgstr "Koreaans toetsenbord" #: keyboard.pm:205 #, c-format msgid "Latin American" msgstr "Latijns-Amerikaans" #: keyboard.pm:206 #, c-format msgid "Laotian" msgstr "Laotiaans" #: keyboard.pm:207 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Lithuaans AZERTY (oud)" #: keyboard.pm:209 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Lithuaans AZERTY (nieuw)" #: keyboard.pm:210 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Lithuaans \"nummer-rij\" QWERTY" #: keyboard.pm:211 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Lithuaans \"fonetisch\" QWERTY" #: keyboard.pm:212 #, c-format msgid "Latvian" msgstr "Lets" #: keyboard.pm:213 #, c-format msgid "Malayalam" msgstr "Malayalam" #: keyboard.pm:214 #, c-format msgid "Macedonian" msgstr "Macedonisch" #: keyboard.pm:215 #, c-format msgid "Myanmar (Burmese)" msgstr "Myanmar (Birmees)" #: keyboard.pm:216 #, c-format msgid "Mongolian (cyrillic)" msgstr "Mongools (cyrillisch)" #: keyboard.pm:217 #, c-format msgid "Maltese (UK)" msgstr "Maltees (UK)" #: keyboard.pm:218 #, c-format msgid "Maltese (US)" msgstr "Maltees (US)" #: keyboard.pm:219 #, c-format msgid "Dutch" msgstr "Nederlands" #: keyboard.pm:221 #, c-format msgid "Oriya" msgstr "Oriya" #: keyboard.pm:222 #, c-format msgid "Polish (qwerty layout)" msgstr "Pools (qwerty layout)" #: keyboard.pm:223 #, c-format msgid "Polish (qwertz layout)" msgstr "Pools (qwertz layout)" #: keyboard.pm:224 #, c-format msgid "Portuguese" msgstr "Portugees" #: keyboard.pm:225 #, c-format msgid "Canadian (Quebec)" msgstr "Canadees (Quebec)" #: keyboard.pm:227 #, c-format msgid "Romanian (qwertz)" msgstr "Roemeens (qwertz)" #: keyboard.pm:228 #, c-format msgid "Romanian (qwerty)" msgstr "Roemeens (qwerty)" #: keyboard.pm:230 #, c-format msgid "Russian (Phonetic)" msgstr "Russisch (Phonetisch)" #: keyboard.pm:231 #, c-format msgid "Saami (norwegian)" msgstr "Saami (Noors)" #: keyboard.pm:232 #, c-format msgid "Saami (swedish/finnish)" msgstr "Saami (Zweeds/Fins)" #: keyboard.pm:234 #, c-format msgid "Slovenian" msgstr "Sloveens" #: keyboard.pm:235 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Slovaaks (QWERTZ)" #: keyboard.pm:236 #, c-format msgid "Slovakian (QWERTY)" msgstr "Slowaaks (QWERTY)" #: keyboard.pm:238 #, c-format msgid "Serbian (cyrillic)" msgstr "Servisch (cyrillisch)" #: keyboard.pm:239 #, c-format msgid "Syriac" msgstr "Syrisch" #: keyboard.pm:240 #, c-format msgid "Syriac (phonetic)" msgstr "Syrisch (fonetisch)" #: keyboard.pm:241 #, c-format msgid "Telugu" msgstr "Telugu" #: keyboard.pm:243 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Tamil (TSCII lay-out)" #: keyboard.pm:244 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Tamil (Typemachine lay-out)" #: keyboard.pm:245 #, c-format msgid "Thai keyboard" msgstr "Thai-toetsenbord" #: keyboard.pm:247 #, c-format msgid "Tajik keyboard" msgstr "Tadzjikisch toetsenbord" #: keyboard.pm:248 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Turks (traditioneel \"F\"-model)" #: keyboard.pm:249 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Turks (modern \"Q\"-model)" #: keyboard.pm:251 #, c-format msgid "Ukrainian" msgstr "Oekraïens" #: keyboard.pm:254 #, c-format msgid "US keyboard (international)" msgstr "US toetsenbord (internationaal)" #: keyboard.pm:255 #, c-format msgid "Uzbek (cyrillic)" msgstr "Oezbekisch (cyrillisch)" #: keyboard.pm:256 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamese \"nummer-rij\" QWERTY" #: keyboard.pm:257 #, c-format msgid "Yugoslavian (latin)" msgstr "Joegoslavisch (latin)" #: keyboard.pm:264 #, c-format msgid "Right Alt key" msgstr "Rechter Alt-knop" #: keyboard.pm:265 #, c-format msgid "Both Shift keys simultaneously" msgstr "Beide Shift-toetsen tegelijkertijd" #: keyboard.pm:266 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Control- en Shift-toetsen tegelijkertijd" #: keyboard.pm:267 #, c-format msgid "CapsLock key" msgstr "CapsLock-toets" #: keyboard.pm:268 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl- en Alt-toetsen tegelijkertijd" #: keyboard.pm:269 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt- en Shift-toetsen tegelijkertijd" #: keyboard.pm:270 #, c-format msgid "\"Menu\" key" msgstr "\"Menu\"-toets" #: keyboard.pm:271 #, c-format msgid "Left \"Windows\" key" msgstr "Linker \"Windows\"-toets" #: keyboard.pm:272 #, c-format msgid "Right \"Windows\" key" msgstr "Rechter \"Windows\"-toets" #: keyboard.pm:273 #, c-format msgid "Both Control keys simultaneously" msgstr "Beide Control-toetsen tegelijkertijd" #: keyboard.pm:274 #, c-format msgid "Both Alt keys simultaneously" msgstr "Beide Alt-toetsen tegelijkertijd" #: keyboard.pm:275 #, c-format msgid "Left Shift key" msgstr "Linker Shift-toets" #: keyboard.pm:276 #, c-format msgid "Right Shift key" msgstr "Rechter Shift-knop" #: keyboard.pm:277 #, c-format msgid "Left Alt key" msgstr "Linker Alt-knop" #: keyboard.pm:278 #, c-format msgid "Left Control key" msgstr "Linker Control-toets" #: keyboard.pm:279 #, c-format msgid "Right Control key" msgstr "Rechter Control-knop" #: keyboard.pm:310 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Hier kunt u de toets of toetscombinatie kiezen welke\n" "schakelen tussen verschillende toetsenbordlay-outs\n" "mogelijk maakt (bijv.: Latijn en niet-Latijn)" #: keyboard.pm:315 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Deze instelling wordt actief na de installatie.\n" "Tijdens de installatie heeft u de rechter Control-toets nodig\n" "om tussen de verschillende toetsenbord-layouts te schakelen." #: lang.pm:149 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:165 #, c-format msgid "Afghanistan" msgstr "Afghanistan" #: lang.pm:166 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:167 #, c-format msgid "United Arab Emirates" msgstr "Verenigde Arabische Emiraten" #: lang.pm:168 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua en Barbuda" #: lang.pm:169 #, c-format msgid "Anguilla" msgstr "Anguilla" #: lang.pm:170 #, c-format msgid "Albania" msgstr "Albanië" #: lang.pm:171 #, c-format msgid "Armenia" msgstr "Armenië" #: lang.pm:172 #, c-format msgid "Netherlands Antilles" msgstr "Nederlandse Antillen" #: lang.pm:173 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:174 #, c-format msgid "Antarctica" msgstr "Antarctica" #: lang.pm:175 standalone/drakxtv:51 #, c-format msgid "Argentina" msgstr "Argentinië" #: lang.pm:176 #, c-format msgid "American Samoa" msgstr "Amerikaans Samoa" #: lang.pm:178 network/adsl_consts.pm:20 standalone/drakxtv:49 #, c-format msgid "Australia" msgstr "Australië" #: lang.pm:179 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:180 #, c-format msgid "Azerbaijan" msgstr "Azerbeidjan" #: lang.pm:181 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnië-Herzegovina" #: lang.pm:182 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:183 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:185 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:186 #, c-format msgid "Bulgaria" msgstr "Bulgarije" #: lang.pm:187 #, c-format msgid "Bahrain" msgstr "Bahrein" #: lang.pm:188 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:189 #, c-format msgid "Benin" msgstr "Benin" #: lang.pm:190 #, c-format msgid "Bermuda" msgstr "Bermuda" #: lang.pm:191 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: lang.pm:192 #, c-format msgid "Bolivia" msgstr "Bolivië" #: lang.pm:193 #, c-format msgid "Brazil" msgstr "Brazilië" #: lang.pm:194 #, c-format msgid "Bahamas" msgstr "Bahama's" #: lang.pm:195 #, c-format msgid "Bhutan" msgstr "Bhutan" #: lang.pm:196 #, c-format msgid "Bouvet Island" msgstr "Bouvet-Eiland" #: lang.pm:197 #, c-format msgid "Botswana" msgstr "Botswana" #: lang.pm:198 #, c-format msgid "Belarus" msgstr "Wit-Rusland" #: lang.pm:199 #, c-format msgid "Belize" msgstr "Belize" #: lang.pm:200 #, c-format msgid "Canada" msgstr "Canada" #: lang.pm:201 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kokos (Keeling) Eiland" #: lang.pm:202 #, c-format msgid "Congo (Kinshasa)" msgstr "Congo (Kinshasa)" #: lang.pm:203 #, c-format msgid "Central African Republic" msgstr "Centraal-Afrikaanse Republiek" #: lang.pm:204 #, c-format msgid "Congo (Brazzaville)" msgstr "Congo (Brazzaville)" #: lang.pm:205 #, c-format msgid "Switzerland" msgstr "Zwitserland" #: lang.pm:206 #, c-format msgid "Cote d'Ivoire" msgstr "Ivoorkust" #: lang.pm:207 #, c-format msgid "Cook Islands" msgstr "Cookeilanden" #: lang.pm:208 #, c-format msgid "Chile" msgstr "Chili" #: lang.pm:209 #, c-format msgid "Cameroon" msgstr "Kameroen" #: lang.pm:210 #, c-format msgid "China" msgstr "China" #: lang.pm:211 #, c-format msgid "Colombia" msgstr "Colombia" #: lang.pm:213 #, c-format msgid "Cuba" msgstr "Cuba" #: lang.pm:214 #, c-format msgid "Cape Verde" msgstr "Kaapverdische Eilanden" #: lang.pm:215 #, c-format msgid "Christmas Island" msgstr "Kerstmis-eiland" #: lang.pm:216 #, c-format msgid "Cyprus" msgstr "Cyprus" #: lang.pm:219 #, c-format msgid "Djibouti" msgstr "Djibouti" #: lang.pm:220 #, c-format msgid "Denmark" msgstr "Denemarken" #: lang.pm:221 #, c-format msgid "Dominica" msgstr "Dominica" #: lang.pm:222 #, c-format msgid "Dominican Republic" msgstr "Dominicaanse Republiek" #: lang.pm:223 #, c-format msgid "Algeria" msgstr "Algerije" #: lang.pm:224 #, c-format msgid "Ecuador" msgstr "Ecuador" #: lang.pm:225 #, c-format msgid "Estonia" msgstr "Estland" #: lang.pm:226 #, c-format msgid "Egypt" msgstr "Egypte" #: lang.pm:227 #, c-format msgid "Western Sahara" msgstr "Westelijke Sahara" #: lang.pm:228 #, c-format msgid "Eritrea" msgstr "Eritrea" #: lang.pm:229 network/adsl_consts.pm:202 network/adsl_consts.pm:210 #: network/adsl_consts.pm:219 network/adsl_consts.pm:230 #, c-format msgid "Spain" msgstr "Spanje" #: lang.pm:230 #, c-format msgid "Ethiopia" msgstr "Ethiopië" #: lang.pm:231 network/adsl_consts.pm:127 #, c-format msgid "Finland" msgstr "Finland" #: lang.pm:232 #, c-format msgid "Fiji" msgstr "Fiji" #: lang.pm:233 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Falkland eilanden pond" #: lang.pm:234 #, c-format msgid "Micronesia" msgstr "Micronesië" #: lang.pm:235 #, c-format msgid "Faroe Islands" msgstr "Faroër Eilanden" #: lang.pm:237 #, c-format msgid "Gabon" msgstr "Gabon" #: lang.pm:238 network/adsl_consts.pm:247 network/adsl_consts.pm:255 #: network/netconnect.pm:51 #, c-format msgid "United Kingdom" msgstr "Verenigd Koninkrijk" #: lang.pm:239 #, c-format msgid "Grenada" msgstr "Grenada" #: lang.pm:240 #, c-format msgid "Georgia" msgstr "Georgië" #: lang.pm:241 #, c-format msgid "French Guiana" msgstr "Frans Guyana" #: lang.pm:242 #, c-format msgid "Ghana" msgstr "Ghana" #: lang.pm:243 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: lang.pm:244 #, c-format msgid "Greenland" msgstr "Groenland" #: lang.pm:245 #, c-format msgid "Gambia" msgstr "Gambia" #: lang.pm:246 #, c-format msgid "Guinea" msgstr "Guinee" #: lang.pm:247 #, c-format msgid "Guadeloupe" msgstr "Guadeloupe" #: lang.pm:248 #, c-format msgid "Equatorial Guinea" msgstr "Equatoriaal Guinee" #: lang.pm:250 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Zuid-Georgia en de zuidelijke Sandwich-eilanden" #: lang.pm:251 #, c-format msgid "Guatemala" msgstr "Guatemala" #: lang.pm:252 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:253 #, c-format msgid "Guinea-Bissau" msgstr "Guinee-Bissau" #: lang.pm:254 #, c-format msgid "Guyana" msgstr "Guyana" #: lang.pm:255 #, c-format msgid "China (Hong Kong)" msgstr "China (Hong Kong)" #: lang.pm:256 #, c-format msgid "Heard and McDonald Islands" msgstr "Heard en McDonald-eilanden" #: lang.pm:257 #, c-format msgid "Honduras" msgstr "Honduras" #: lang.pm:258 #, c-format msgid "Croatia" msgstr "Kroatië" #: lang.pm:259 #, c-format msgid "Haiti" msgstr "Haïti" #: lang.pm:260 network/adsl_consts.pm:152 #, c-format msgid "Hungary" msgstr "Hongarije" #: lang.pm:261 #, c-format msgid "Indonesia" msgstr "Indonesië" #: lang.pm:262 standalone/drakxtv:48 #, c-format msgid "Ireland" msgstr "Ierland" #: lang.pm:263 #, c-format msgid "Israel" msgstr "Israël" #: lang.pm:264 #, c-format msgid "India" msgstr "India" #: lang.pm:265 #, c-format msgid "British Indian Ocean Territory" msgstr "Brits Indische Oceaan Territorium" #: lang.pm:266 #, c-format msgid "Iraq" msgstr "Irak" #: lang.pm:267 #, c-format msgid "Iran" msgstr "Iran" #: lang.pm:268 #, c-format msgid "Iceland" msgstr "IJsland" #: lang.pm:270 #, c-format msgid "Jamaica" msgstr "Jamaica" #: lang.pm:271 #, c-format msgid "Jordan" msgstr "Jordanië" #: lang.pm:272 #, c-format msgid "Japan" msgstr "Japan" #: lang.pm:273 #, c-format msgid "Kenya" msgstr "Kenia" #: lang.pm:274 #, c-format msgid "Kyrgyzstan" msgstr "Kirgizië" #: lang.pm:275 #, c-format msgid "Cambodia" msgstr "Cambodja" #: lang.pm:276 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:277 #, c-format msgid "Comoros" msgstr "Komoren" #: lang.pm:278 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts en Nevis" #: lang.pm:279 #, c-format msgid "Korea (North)" msgstr "Noord-Korea" #: lang.pm:280 #, c-format msgid "Korea" msgstr "Korea" #: lang.pm:281 #, c-format msgid "Kuwait" msgstr "Koeweit" #: lang.pm:282 #, c-format msgid "Cayman Islands" msgstr "Kaaimaneilanden" #: lang.pm:283 #, c-format msgid "Kazakhstan" msgstr "Kazachstan" #: lang.pm:284 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:285 #, c-format msgid "Lebanon" msgstr "Libanon" #: lang.pm:286 #, c-format msgid "Saint Lucia" msgstr "Santa Lucia" #: lang.pm:287 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:288 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: lang.pm:289 #, c-format msgid "Liberia" msgstr "Liberia" #: lang.pm:290 #, c-format msgid "Lesotho" msgstr "Lesotho" #: lang.pm:291 #, c-format msgid "Lithuania" msgstr "Litouwen" #: lang.pm:292 #, c-format msgid "Luxembourg" msgstr "Luxemburg" #: lang.pm:293 #, c-format msgid "Latvia" msgstr "Letland" #: lang.pm:294 #, c-format msgid "Libya" msgstr "Libië" #: lang.pm:295 #, c-format msgid "Morocco" msgstr "Marokko" #: lang.pm:296 #, c-format msgid "Monaco" msgstr "Monaco" #: lang.pm:297 #, c-format msgid "Moldova" msgstr "Moldavië" #: lang.pm:298 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: lang.pm:299 #, c-format msgid "Marshall Islands" msgstr "Marshall Eilanden" #: lang.pm:300 #, c-format msgid "Macedonia" msgstr "Macedonië" #: lang.pm:301 #, c-format msgid "Mali" msgstr "Mali" #: lang.pm:302 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:303 #, c-format msgid "Mongolia" msgstr "Mongolië" #: lang.pm:304 #, c-format msgid "Northern Mariana Islands" msgstr "Noordelijke Mariana Eilanden" #: lang.pm:305 #, c-format msgid "Martinique" msgstr "Martinique" #: lang.pm:306 #, c-format msgid "Mauritania" msgstr "Mauritanië" #: lang.pm:307 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:308 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:309 #, c-format msgid "Mauritius" msgstr "Mauritius" #: lang.pm:310 #, c-format msgid "Maldives" msgstr "Malediven" #: lang.pm:311 #, c-format msgid "Malawi" msgstr "Malawi" #: lang.pm:312 #, c-format msgid "Mexico" msgstr "Mexico" #: lang.pm:313 #, c-format msgid "Malaysia" msgstr "Maleisië" #: lang.pm:314 #, c-format msgid "Mozambique" msgstr "Mozambique" #: lang.pm:315 #, c-format msgid "Namibia" msgstr "Namibië" #: lang.pm:316 #, c-format msgid "New Caledonia" msgstr "Nieuw Caledonië" #: lang.pm:317 #, c-format msgid "Niger" msgstr "Niger" #: lang.pm:318 #, c-format msgid "Norfolk Island" msgstr "Norfolk Eiland" #: lang.pm:319 #, c-format msgid "Nigeria" msgstr "Nigeria" #: lang.pm:320 #, c-format msgid "Nicaragua" msgstr "Nicaragua" #: lang.pm:323 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:324 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:325 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:326 #, c-format msgid "New Zealand" msgstr "Nieuw Zeeland" #: lang.pm:327 #, c-format msgid "Oman" msgstr "Oman" #: lang.pm:328 #, c-format msgid "Panama" msgstr "Panama" #: lang.pm:329 #, c-format msgid "Peru" msgstr "Peru" #: lang.pm:330 #, c-format msgid "French Polynesia" msgstr "Frans Polynesië" #: lang.pm:331 #, c-format msgid "Papua New Guinea" msgstr "Papoea Nieuw Guinea" #: lang.pm:332 #, c-format msgid "Philippines" msgstr "Filippijnen" #: lang.pm:333 #, c-format msgid "Pakistan" msgstr "Pakistan" #: lang.pm:334 network/adsl_consts.pm:186 #, c-format msgid "Poland" msgstr "Polen" #: lang.pm:335 #, c-format msgid "Saint Pierre and Miquelon" msgstr "St. Pierre en Miquelon" #: lang.pm:336 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:337 #, c-format msgid "Puerto Rico" msgstr "Puerto Rico" #: lang.pm:338 #, c-format msgid "Palestine" msgstr "Palestina" #: lang.pm:339 network/adsl_consts.pm:196 #, c-format msgid "Portugal" msgstr "Portugal" #: lang.pm:340 #, c-format msgid "Paraguay" msgstr "Paraguay" #: lang.pm:341 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:342 #, c-format msgid "Qatar" msgstr "Qatar" #: lang.pm:343 #, c-format msgid "Reunion" msgstr "Réunion" #: lang.pm:344 #, c-format msgid "Romania" msgstr "Roemenië" #: lang.pm:345 #, c-format msgid "Russia" msgstr "Rusland" #: lang.pm:346 #, c-format msgid "Rwanda" msgstr "Rwanda" #: lang.pm:347 #, c-format msgid "Saudi Arabia" msgstr "Saoedi-Arabië" #: lang.pm:348 #, c-format msgid "Solomon Islands" msgstr "Salomonseilanden" #: lang.pm:349 #, c-format msgid "Seychelles" msgstr "Seychellen" #: lang.pm:350 #, c-format msgid "Sudan" msgstr "Soedan" #: lang.pm:352 #, c-format msgid "Singapore" msgstr "Singapore" #: lang.pm:353 #, c-format msgid "Saint Helena" msgstr "St. Helena" #: lang.pm:354 #, c-format msgid "Slovenia" msgstr "Slovenië" #: lang.pm:355 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard en Jan Mayen Eilanden" #: lang.pm:356 #, c-format msgid "Slovakia" msgstr "Slowakije" #: lang.pm:357 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: lang.pm:358 #, c-format msgid "San Marino" msgstr "San Marino" #: lang.pm:359 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:360 #, c-format msgid "Somalia" msgstr "Somalië" #: lang.pm:361 #, c-format msgid "Suriname" msgstr "Suriname" #: lang.pm:362 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome en Principe" #: lang.pm:363 #, c-format msgid "El Salvador" msgstr "El Salvador" #: lang.pm:364 #, c-format msgid "Syria" msgstr "Syrië" #: lang.pm:365 #, c-format msgid "Swaziland" msgstr "Swaziland" #: lang.pm:366 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks en Caicos Eilanden" #: lang.pm:367 #, c-format msgid "Chad" msgstr "Tsjaad" #: lang.pm:368 #, c-format msgid "French Southern Territories" msgstr "Franse Zuidelijke Territoriën" #: lang.pm:369 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:370 #, c-format msgid "Thailand" msgstr "Thailand" #: lang.pm:371 #, c-format msgid "Tajikistan" msgstr "Tadjzikistan" #: lang.pm:372 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:373 #, c-format msgid "East Timor" msgstr "Oost-Timor" #: lang.pm:374 #, c-format msgid "Turkmenistan" msgstr "Turkmenistan" #: lang.pm:375 #, c-format msgid "Tunisia" msgstr "Tunesië" #: lang.pm:376 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:377 #, c-format msgid "Turkey" msgstr "Turkije" #: lang.pm:378 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad en Tobago" #: lang.pm:379 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:380 #, c-format msgid "Taiwan" msgstr "Taiwan" #: lang.pm:381 #, c-format msgid "Tanzania" msgstr "Tanzania" #: lang.pm:382 #, c-format msgid "Ukraine" msgstr "Oekraïene" #: lang.pm:383 #, c-format msgid "Uganda" msgstr "Oeganda" #: lang.pm:384 #, c-format msgid "United States Minor Outlying Islands" msgstr "Amerikaanse Kleine Eilanden" #: lang.pm:386 #, c-format msgid "Uruguay" msgstr "Uruguay" #: lang.pm:387 #, c-format msgid "Uzbekistan" msgstr "Oezbekistan" #: lang.pm:388 #, c-format msgid "Vatican" msgstr "Vaticaan" #: lang.pm:389 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Sint Vincent en de Grenadinen" #: lang.pm:390 #, c-format msgid "Venezuela" msgstr "Venezuela" #: lang.pm:391 #, c-format msgid "Virgin Islands (British)" msgstr "Britse Maagdeneilanden" #: lang.pm:392 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Amerikaanse Maagdeneilanden" #: lang.pm:393 #, c-format msgid "Vietnam" msgstr "Vietnam" #: lang.pm:394 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:395 #, c-format msgid "Wallis and Futuna" msgstr "Wallis en Futuna" #: lang.pm:396 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:397 #, c-format msgid "Yemen" msgstr "Jemen" #: lang.pm:398 #, c-format msgid "Mayotte" msgstr "Mayotte" #: lang.pm:399 #, c-format msgid "Serbia & Montenegro" msgstr "Servië & Montenegro" #: lang.pm:400 standalone/drakxtv:50 #, c-format msgid "South Africa" msgstr "Zuid-Afrika" #: lang.pm:401 #, c-format msgid "Zambia" msgstr "Zambia" #: lang.pm:402 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: lang.pm:983 #, c-format msgid "Welcome to %s" msgstr "Welkom bij %s" #: loopback.pm:32 #, c-format msgid "Circular mounts %s\n" msgstr "Circulaire mounts: %s\n" #: lvm.pm:115 #, c-format msgid "Remove the logical volumes first\n" msgstr "Verwijder eerst de logische delen\n" #: modules/interactive.pm:21 standalone/drakconnect:959 #, c-format msgid "Parameters" msgstr "Parameters" #: modules/interactive.pm:21 standalone/draksec:44 #, c-format msgid "NONE" msgstr "GEEN" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Moduleconfiguratie" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "U kunt elke vlag van de module hier configureren" #: modules/interactive.pm:63 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s interfaces gevonden" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Heeft u er nog één?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Heeft u een %s interface?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Hardware-info bekijken" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:87 #, c-format msgid "Installing driver for %s card %s" msgstr "Bezig met installeren van stuurprogramma voor %s kaart %s" #: modules/interactive.pm:87 #, c-format msgid "(module %s)" msgstr "(module %s)" #: modules/interactive.pm:98 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "U kunt nu de opties doorgeven aan module %s.\n" "Merk op dat een adres moet worden ingegeven met de prefix 0x zoals '0x123'" #: modules/interactive.pm:104 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "U mag nu de opties voor module %s ingeven.\n" "Opties staan in het formaat ``naam=waarde naam2=waarde2 ...''.\n" "Bijvoorbeeld, ``io=0x300 irq=7''" #: modules/interactive.pm:106 #, c-format msgid "Module options:" msgstr "Module-opties:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:118 #, c-format msgid "Which %s driver should I try?" msgstr "Welk %s-stuurprogramma te proberen?" #: modules/interactive.pm:127 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "In sommige gevallen heeft het stuurprogramma %s extra informatie nodig\n" "om juist te werken, alhoewel het meestal ook zonder goed werkt. Wilt u\n" "extra opties invoeren of laat u liever het stuurprogramma zijn informatie\n" "zelf zoeken? Soms zal de automatische detectie de computer laten hangen,\n" "maar het zou geen schade mogen veroorzaken." #: modules/interactive.pm:131 #, c-format msgid "Autoprobe" msgstr "Automatisch bespeuren" #: modules/interactive.pm:131 #, c-format msgid "Specify options" msgstr "Opties specificeren" #: modules/interactive.pm:143 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Het laden van module %s is niet gelukt.\n" "Wenst u opnieuw te proberen met andere parameters?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "een nummer" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d door komma's gescheiden nummers" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d kommagescheiden tekenreeksen" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "kommagescheiden getallen" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "door komma's gescheiden tekenreeksen" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - muis" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Standaard" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Algemene PS/2 wielmuis" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:42 network/modem.pm:43 network/modem.pm:44 #: network/modem.pm:58 network/modem.pm:72 network/modem.pm:77 #: network/modem.pm:108 network/netconnect.pm:574 network/netconnect.pm:579 #: network/netconnect.pm:591 network/netconnect.pm:596 #: network/netconnect.pm:612 network/netconnect.pm:614 #, c-format msgid "Automatic" msgstr "Automatisch" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 knop" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Algemene 2-knopsmuis" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Algemene drieknopsmuis met wiel-emulatie" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Wiel" #: mouse.pm:55 #, c-format msgid "serial" msgstr "seriëel" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Algemene 3-knopsmuis" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan met wiel-emultatie" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series met wiel-emulatie" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech-muis (seriëel, oud C7-type)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech-muis (seriëel, oud C7-type) met wiel-emulatie" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse met wiel-emulatie" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmuis" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 knoppen" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 knoppen" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "Drie knoppen met wiel-emulatie" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universeel" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Iedere PS/2 & USB-muis" #: mouse.pm:92 standalone/drakvpn:1138 #, c-format msgid "none" msgstr "geen" #: mouse.pm:94 #, c-format msgid "No mouse" msgstr "Geen muis" #: mouse.pm:515 #, c-format msgid "Please test the mouse" msgstr "Test uw muis a.u.b." #: mouse.pm:517 #, c-format msgid "To activate the mouse," msgstr "Om de muis te activeren," #: mouse.pm:518 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "BEWEEG UW WIELTJE!" #: network/adsl.pm:19 #, c-format msgid "use pppoe" msgstr "pppoe gebruiken" #: network/adsl.pm:20 #, c-format msgid "use pptp" msgstr "pptp gebruiken" #: network/adsl.pm:21 #, c-format msgid "use dhcp" msgstr "DHCP gebruiken" #: network/adsl.pm:22 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr "- gevonden" #: network/adsl.pm:23 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (met gebruik van pppoa) usb" #: network/adsl.pm:24 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (met gebruik van dhcp) usb" #: network/adsl.pm:35 network/netconnect.pm:754 #, c-format msgid "Connect to the Internet" msgstr "Verbinden met het Internet" #: network/adsl.pm:36 network/netconnect.pm:755 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "De meest gebruikte manier om te verbinden met adsl is met\n" "pppoe. Sommige verbindingen gebruiken pptp, enkele gebruiken\n" "dhcp. Als u het niet weet, kiest u 'gebruik pppoe'" #: network/adsl.pm:41 network/netconnect.pm:759 #, c-format msgid "ADSL connection type :" msgstr "ADSL-verbindingstype:" #: network/drakfirewall.pm:12 #, c-format msgid "Web Server" msgstr "Webserver" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Domeinnaam-server" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "SSH-server" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP-server" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "E-mailserver" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP- en IMAP-server" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Telnet-server" #: network/drakfirewall.pm:48 #, c-format msgid "Samba server" msgstr "Samba-server" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "CUPS-server" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "Echo-aanvraag (ping)" #: network/drakfirewall.pm:125 #, c-format msgid "No network card" msgstr "Geen netwerkkaart" #: network/drakfirewall.pm:146 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "Configuratie van drakfirewall\n" "\n" "Dit programma configureert een persoonlijke firewall voor deze \n" "Mandrakelinux machine. Voor een krachtige, specifieke\n" "firewall-oplossing, zie de gespecialiseerde MandrakeSecurity \n" "Firewall-distributie." #: network/drakfirewall.pm:152 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewall configuratieprogramma\n" "\n" "Controleer dat u uw netwerk/internettoegang hebt geconfigureerd met\n" "drakconnect voordat u verdergaat." #: network/drakfirewall.pm:169 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" "Welke diensten zoudt u het Internet willen toestaan om mee te verbinden?" #: network/drakfirewall.pm:170 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "U kunt diverse poorten opgeven. \n" "Geldige voorbeelden zijn: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Bekijk /etc/services eens voor informatie." #: network/drakfirewall.pm:176 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Ongeldige poort opgegeven: %s.\n" "Het juiste formaat is \"port/tcp\" of \"port/udp\", \n" "waar het poortnummer ligt tussen 1 en 65535.\n" "\n" "U kunt ook een poortbereik opgeven (bijv.: 24300:24350/udp)" #: network/drakfirewall.pm:186 #, c-format msgid "Everything (no firewall)" msgstr "Alles (geen firewall)" #: network/drakfirewall.pm:188 #, c-format msgid "Other ports" msgstr "Overige poorten" #: network/isdn.pm:113 network/netconnect.pm:424 #, c-format msgid "Unlisted - edit manually" msgstr "Niet opgenomen - handmatig bewerken" #: network/isdn.pm:156 network/netconnect.pm:376 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:156 network/netconnect.pm:376 #, c-format msgid "I don't know" msgstr "Ik weet het niet" #: network/isdn.pm:157 network/netconnect.pm:376 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:158 network/netconnect.pm:376 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:42 network/modem.pm:43 network/modem.pm:44 #: network/netconnect.pm:579 network/netconnect.pm:596 #: network/netconnect.pm:612 #, c-format msgid "Manual" msgstr "Handmatig" #: network/netconnect.pm:88 network/netconnect.pm:453 #: network/netconnect.pm:463 network/netconnect.pm:822 #: network/netconnect.pm:827 #, c-format msgid "Manual choice" msgstr "Handmatige keuze" #: network/netconnect.pm:88 #, c-format msgid "Internal ISDN card" msgstr "Interne ISDN kaart" # Wifi-termen #: network/netconnect.pm:97 #, c-format msgid "Ad-hoc" msgstr "Ad-hoc" # Wifi-termen #: network/netconnect.pm:98 #, c-format msgid "Managed" msgstr "Beheerd" # Wifi-termen #: network/netconnect.pm:99 #, c-format msgid "Master" msgstr "Master" # Wifi-termen #: network/netconnect.pm:100 #, c-format msgid "Repeater" msgstr "Repeater" #: network/netconnect.pm:101 #, c-format msgid "Secondary" msgstr "Secundaire" #: network/netconnect.pm:102 #, c-format msgid "Auto" msgstr "Automatisch" #: network/netconnect.pm:105 printer/printerdrake.pm:1133 #: standalone/drakups:64 #, c-format msgid "Manual configuration" msgstr "Handmatige configuratie" #: network/netconnect.pm:106 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "Automatisch IP (BOOTP/DHCP)" #: network/netconnect.pm:108 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "Automatisch IP (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:111 #, c-format msgid "Protocol for the rest of the world" msgstr "Protocol voor de rest van de wereld" #: network/netconnect.pm:113 standalone/drakconnect:528 #, c-format msgid "European protocol (EDSS1)" msgstr "Europees protocol (EDSS1)" #: network/netconnect.pm:114 standalone/drakconnect:529 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protocol voor de rest van de wereld \n" " geen D-Channel (geleasde lijnen)" #: network/netconnect.pm:146 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch USB-modem" #: network/netconnect.pm:147 #, c-format msgid "Sagem USB modem" msgstr "Sagem USB modem" #: network/netconnect.pm:148 #, c-format msgid "Bewan modem" msgstr "Bewan modem" #: network/netconnect.pm:149 #, c-format msgid "ECI Hi-Focus modem" msgstr "ECI Hi-Focus modem" #: network/netconnect.pm:153 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Dynamic Host Configuration Protocol (DHCP)" #: network/netconnect.pm:154 #, c-format msgid "Manual TCP/IP configuration" msgstr "Handmatige TCP/IP-configuratie" #: network/netconnect.pm:155 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "Point to Point Tunneling Protocol (PPTP)" #: network/netconnect.pm:156 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "PPP over Ethernet (PPPoE)" #: network/netconnect.pm:157 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "PPP over ATM (PPPoA)" #: network/netconnect.pm:161 #, c-format msgid "Bridged Ethernet LLC" msgstr "Bridged Ethernet LLC" #: network/netconnect.pm:162 #, c-format msgid "Bridged Ethernet VC" msgstr "Bridged Ethernet VC" #: network/netconnect.pm:163 #, c-format msgid "Routed IP LLC" msgstr "Gerouteerd IP LLC" #: network/netconnect.pm:164 #, c-format msgid "Routed IP VC" msgstr "Gerouteerd IP VC" #: network/netconnect.pm:165 #, c-format msgid "PPPOA LLC" msgstr "PPPOA LLC" #: network/netconnect.pm:166 #, c-format msgid "PPPOA VC" msgstr "PPPOA VC" #: network/netconnect.pm:170 standalone/drakconnect:466 #, c-format msgid "Script-based" msgstr "Script-gebaseerd" #: network/netconnect.pm:171 standalone/drakconnect:466 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:172 standalone/drakconnect:466 #, c-format msgid "Terminal-based" msgstr "Gebaseerd op een terminal" #: network/netconnect.pm:173 standalone/drakconnect:466 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:174 standalone/drakconnect:466 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:219 standalone/drakconnect:55 #, c-format msgid "Network & Internet Configuration" msgstr "Netwerk- & Internetconfiguratie" #: network/netconnect.pm:225 #, c-format msgid "(detected on port %s)" msgstr "(gevonden op poort %s)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:227 #, c-format msgid "(detected %s)" msgstr "(%s gevonden)" #: network/netconnect.pm:227 #, c-format msgid "(detected)" msgstr "(gevonden)" #: network/netconnect.pm:229 #, c-format msgid "Modem connection" msgstr "Modemverbinding" #: network/netconnect.pm:230 #, c-format msgid "ISDN connection" msgstr "ISDN-verbinding" #: network/netconnect.pm:231 #, c-format msgid "ADSL connection" msgstr "ADSL-verbinding" #: network/netconnect.pm:232 #, c-format msgid "Cable connection" msgstr "Kabelverbinding" #: network/netconnect.pm:233 #, c-format msgid "LAN connection" msgstr "LAN-verbinding" #: network/netconnect.pm:234 network/netconnect.pm:248 #, c-format msgid "Wireless connection" msgstr "Draadloze verbinding" #: network/netconnect.pm:244 #, c-format msgid "Choose the connection you want to configure" msgstr "Selecteer de verbinding die u wenst in te stellen" #: network/netconnect.pm:261 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "We gaan nu de %s -verbinding configureren.\n" "\n" "\n" "Klik op \"%s\" om door te gaan." #: network/netconnect.pm:269 network/netconnect.pm:781 #, c-format msgid "Connection Configuration" msgstr "Configuratie van verbinding" #: network/netconnect.pm:270 network/netconnect.pm:782 #, c-format msgid "Please fill or check the field below" msgstr "Controleer het onderstaande veld of vul het in" #: network/netconnect.pm:277 standalone/drakconnect:519 #, c-format msgid "Card IRQ" msgstr "IRQ van de kaart" #: network/netconnect.pm:278 standalone/drakconnect:520 #, c-format msgid "Card mem (DMA)" msgstr "Mem (DMA) van de kaart" #: network/netconnect.pm:279 standalone/drakconnect:521 #, c-format msgid "Card IO" msgstr "IO van de kaart" #: network/netconnect.pm:280 standalone/drakconnect:522 #, c-format msgid "Card IO_0" msgstr "IO_0 van de kaart" #: network/netconnect.pm:281 #, c-format msgid "Card IO_1" msgstr "IO_1 van de kaart" #: network/netconnect.pm:282 #, c-format msgid "Your personal phone number" msgstr "Uw persoonlijke telefoonnummer" #: network/netconnect.pm:283 network/netconnect.pm:785 #, c-format msgid "Provider name (ex provider.net)" msgstr "Naam van uw provider (bijv. provider.nl)" #: network/netconnect.pm:284 standalone/drakconnect:463 #, c-format msgid "Provider phone number" msgstr "Telefoonnummer van uw provider" #: network/netconnect.pm:285 #, c-format msgid "Provider DNS 1 (optional)" msgstr "DNS 1 van uw provider (optioneel)" #: network/netconnect.pm:286 #, c-format msgid "Provider DNS 2 (optional)" msgstr "DNS 2 van uw provider (optioneel)" #: network/netconnect.pm:287 standalone/drakconnect:419 #, c-format msgid "Dialing mode" msgstr "Inbelmodus" #: network/netconnect.pm:288 standalone/drakconnect:424 #: standalone/drakconnect:484 #, c-format msgid "Connection speed" msgstr "Verbindingssnelheid" #: network/netconnect.pm:289 standalone/drakconnect:429 #, c-format msgid "Connection timeout (in sec)" msgstr "Maximale wachttijd voor verbinding (in seconden)" #: network/netconnect.pm:292 network/netconnect.pm:788 #: standalone/drakconnect:461 #, c-format msgid "Account Login (user name)" msgstr "Account-aanmelding (gebruikersnaam)" #: network/netconnect.pm:293 network/netconnect.pm:789 #: standalone/drakconnect:462 #, c-format msgid "Account Password" msgstr "Wachtwoord" #: network/netconnect.pm:323 network/netconnect.pm:637 #: network/netconnect.pm:820 #, c-format msgid "Select the network interface to configure:" msgstr "Selecteer de in te stellen netwerkinterface:" #: network/netconnect.pm:323 network/netconnect.pm:457 #: network/netconnect.pm:641 standalone/drakgw:113 standalone/drakvpn:49 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Helaas, wij ondersteunen alleen 2.4 kernels en hoger." #: network/netconnect.pm:325 network/netconnect.pm:366 #: network/netconnect.pm:638 network/netconnect.pm:822 network/shorewall.pm:84 #: standalone/drakconnect:643 standalone/drakgw:225 standalone/drakvpn:219 #, c-format msgid "Net Device" msgstr "Netwerkapparaat" #: network/netconnect.pm:326 network/netconnect.pm:334 #, c-format msgid "External ISDN modem" msgstr "Extern ISDN modem" #: network/netconnect.pm:365 standalone/harddrake2:115 #, c-format msgid "Select a device !" msgstr "Selecteer een apparaat!" #: network/netconnect.pm:374 network/netconnect.pm:384 #: network/netconnect.pm:394 network/netconnect.pm:410 #: network/netconnect.pm:421 #, c-format msgid "ISDN Configuration" msgstr "ISDN Configuratie" #: network/netconnect.pm:375 #, c-format msgid "What kind of card do you have?" msgstr "Welk type kaart heeft u?" #: network/netconnect.pm:385 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Als u een ISA kaart bezit, zouden de waardes op het volgende scherm moeten " "kloppen.\n" "\n" "Als u een PCMCIA kaart bezit, moet u het irq en io van uw kaart weten.\n" #: network/netconnect.pm:389 #, c-format msgid "Continue" msgstr "Doorgaan" #: network/netconnect.pm:389 #, c-format msgid "Abort" msgstr "Afbreken" #: network/netconnect.pm:395 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Welke van de volgende is uw ISDN kaart?" #: network/netconnect.pm:410 #, c-format msgid "Which protocol do you want to use?" msgstr "Welk protocol wenst u te gebruiken?" #: network/netconnect.pm:412 standalone/drakconnect:116 #: standalone/drakconnect:527 standalone/drakvpn:1140 #, c-format msgid "Protocol" msgstr "Protocol" #: network/netconnect.pm:421 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Selecteer uw provider.\n" " Als uw provider niet in de lijst staat, kiest u Unlisted" #: network/netconnect.pm:423 network/netconnect.pm:529 #: network/netconnect.pm:675 #, c-format msgid "Provider:" msgstr "Provider:" #: network/netconnect.pm:438 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Het systeem ondersteunt uw modem niet.\n" "Neem eens een kijkje op http://www.linmodems.org" #: network/netconnect.pm:450 #, c-format msgid "Select the modem to configure:" msgstr "Kies de te configureren modem:" #: network/netconnect.pm:498 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Geef aan met welke seriële poort uw modem verbonden is." #: network/netconnect.pm:527 #, c-format msgid "Select your provider:" msgstr "Selecteer uw provider:" #: network/netconnect.pm:556 #, c-format msgid "Dialup: account options" msgstr "Inbellen: account-opties" #: network/netconnect.pm:559 #, c-format msgid "Connection name" msgstr "Verbindingsnaam" #: network/netconnect.pm:560 #, c-format msgid "Phone number" msgstr "Telefoonnummer" #: network/netconnect.pm:561 #, c-format msgid "Login ID" msgstr "Aanmeldingsnaam" #: network/netconnect.pm:576 network/netconnect.pm:609 #, c-format msgid "Dialup: IP parameters" msgstr "Inbellen: IP-parameters" #: network/netconnect.pm:579 #, c-format msgid "IP parameters" msgstr "IP-parameters" #: network/netconnect.pm:580 network/netconnect.pm:912 #: printer/printerdrake.pm:431 standalone/drakconnect:116 #: standalone/drakconnect:325 standalone/drakconnect:806 #: standalone/drakups:266 #, c-format msgid "IP address" msgstr "IP adres" #: network/netconnect.pm:581 #, c-format msgid "Subnet mask" msgstr "Subnetmasker" #: network/netconnect.pm:593 #, c-format msgid "Dialup: DNS parameters" msgstr "Inbellen: DNS-parameters" #: network/netconnect.pm:596 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:597 #, c-format msgid "Domain name" msgstr "Domeinnaam" #: network/netconnect.pm:598 network/netconnect.pm:786 #: standalone/drakconnect:924 #, c-format msgid "First DNS Server (optional)" msgstr "Eerste DNS-server (optioneel)" #: network/netconnect.pm:599 network/netconnect.pm:787 #: standalone/drakconnect:925 #, c-format msgid "Second DNS Server (optional)" msgstr "Tweede DNS-server (optioneel)" #: network/netconnect.pm:600 #, c-format msgid "Set hostname from IP" msgstr "Hostnaam bepalen a.d.h.v. IP-adres" #: network/netconnect.pm:612 standalone/drakconnect:336 #, c-format msgid "Gateway" msgstr "Gateway" #: network/netconnect.pm:613 #, c-format msgid "Gateway IP address" msgstr "IP-adres van gateway" #: network/netconnect.pm:637 #, c-format msgid "ADSL configuration" msgstr "ADSL-configuratie" #: network/netconnect.pm:673 #, c-format msgid "Please choose your ADSL provider" msgstr "Kies uw ADSL-provider alstublieft" #: network/netconnect.pm:691 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "U heeft de Alcatel-microcode nodig.\n" "U kunt deze nu invoeren via een diskette of uw Windows-partitie,\n" "of het overslaan en uitstellen." #: network/netconnect.pm:695 network/netconnect.pm:700 #, c-format msgid "Use a floppy" msgstr "Een floppy gebruiken" #: network/netconnect.pm:695 network/netconnect.pm:704 #, c-format msgid "Use my Windows partition" msgstr "Mijn Windows-partitie gebruiken" #: network/netconnect.pm:695 network/netconnect.pm:708 #, c-format msgid "Do it later" msgstr "Uitstellen" #: network/netconnect.pm:715 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Kopiëren van firmware mislukt, bestand %s niet gevonden" #: network/netconnect.pm:722 #, c-format msgid "Firmware copy succeeded" msgstr "Kopiëren van firmware geslaagd" #: network/netconnect.pm:737 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "U heeft de Alcatel microcode nodig.\n" "Deze kunt u downloaden van\n" "%s\n" "Vervolgens kopiëert u mgmt.o naar /usr/share/speedtouch" #: network/netconnect.pm:790 #, c-format msgid "Virtual Path ID (VPI):" msgstr "Virtueel pad-ID (VPI):" #: network/netconnect.pm:791 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "Virtueel circuit-ID (VCI):" # Waarschijnlijk incorrecte vertaling. Context? #: network/netconnect.pm:793 #, c-format msgid "Encapsulation :" msgstr "Inkapseling:" #: network/netconnect.pm:810 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" "Het ECI Hi-Focus modem is niet ondersteund vanwege het probleem dat het " "stuurprogramma binair gedistribueerd wordt.\n" "\n" "U kunt het stuurprogramma vinden op http://eciadsl.flashtux.org/" #: network/netconnect.pm:837 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "WAARSCHUWING: Dit apparaat is al geconfigureerd om verbinding te maken met " "Internet.\n" "Accepteer gewoon de instellingen om dit apparaat geconfigureerd te laten.\n" "Als u de onderstaande velden aanpast, wordt het apparaat opnieuw " "geconfigureerd" #: network/netconnect.pm:850 network/netconnect.pm:1222 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Gefeliciteerd, de netwerk- en internetconfiguratie is af.\n" "\n" #: network/netconnect.pm:864 #, c-format msgid "Zeroconf hostname resolution" msgstr "Hostnaam opzoeken met zeroconf" #: network/netconnect.pm:865 network/netconnect.pm:899 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "Bezig met configureren van netwerkapparaat %s (stuurprogramma %s)" #: network/netconnect.pm:866 #, c-format msgid "" "The following protocols can be used to configure an ethernet connection. " "Please choose the one you want to use" msgstr "" "Een ethernetverbinding kan met de volgende protocollen geconfigureerd " "worden. Kiest u degene die u wenst." #: network/netconnect.pm:900 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Gelieve de IP-configuratie voor deze machine in te geven.\n" "Elke ingang moet ingegeven worden als een IP adres in `dotted-decimal'-\n" "vorm (bijvoorbeeld 1.2.3.4)." #: network/netconnect.pm:907 #, c-format msgid "Assign host name from DHCP address" msgstr "Hostnaam toewijzen vanaf DHCP-adres" #: network/netconnect.pm:908 #, c-format msgid "DHCP host name" msgstr "DHCP-hostnaam" #: network/netconnect.pm:913 standalone/drakconnect:330 #: standalone/drakconnect:807 standalone/drakgw:321 #, c-format msgid "Netmask" msgstr "Netmasker" #: network/netconnect.pm:915 standalone/drakconnect:412 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Netwerkkaart id onthouden (nuttig voor laptops)" #: network/netconnect.pm:916 standalone/drakconnect:413 #, c-format msgid "Network Hotplugging" msgstr "\"Hot\"-aansluiten van netwerk" #: network/netconnect.pm:917 standalone/drakconnect:407 #, c-format msgid "Start at boot" msgstr "Bij opstarten starten" #: network/netconnect.pm:919 standalone/drakconnect:810 #, c-format msgid "DHCP client" msgstr "DHCP client" #: network/netconnect.pm:929 printer/printerdrake.pm:1383 #: standalone/drakconnect:608 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "Het IP-adres moet het formaat 1.2.3.4 hebben" #: network/netconnect.pm:932 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "Waarschuwing: IP-adres %s is normaal gesproken gereserveerd!" #: network/netconnect.pm:962 network/netconnect.pm:991 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Voert u de draadloos-parameters voor deze kaart in:" #: network/netconnect.pm:965 standalone/drakconnect:378 #, c-format msgid "Operating Mode" msgstr "Operatiemodus" #: network/netconnect.pm:967 standalone/drakconnect:379 #, c-format msgid "Network name (ESSID)" msgstr "Netwerknaam (ESSID)" #: network/netconnect.pm:968 standalone/drakconnect:380 #, c-format msgid "Network ID" msgstr "Netwerk-ID" #: network/netconnect.pm:969 standalone/drakconnect:381 #, c-format msgid "Operating frequency" msgstr "Operatiefrequentie" #: network/netconnect.pm:970 standalone/drakconnect:382 #, c-format msgid "Sensitivity threshold" msgstr "Drempelwaarde gevoeligheid" #: network/netconnect.pm:971 standalone/drakconnect:383 #, c-format msgid "Bitrate (in b/s)" msgstr "Bitsnelheid (in b/s)" #: network/netconnect.pm:977 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "'Freq' dient het achtervoegsel k, M of G te hebben (bijvoorbeeld \"2.46G" "\"voor een frequentie van 2.46 GHz, of genoeg '0' (nullen) aan het eind " "toegevoegd." #: network/netconnect.pm:981 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "'Rate' dient het achtervoegsel k, M of G te hebben (bijvoorbeeld \"11M\"voor " "11M), of genoeg '0' (nullen) aan het eind toegevoegd." #: network/netconnect.pm:994 standalone/drakconnect:394 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" #: network/netconnect.pm:995 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" # #: network/netconnect.pm:1002 standalone/drakconnect:395 #, c-format msgid "Fragmentation" msgstr "Fragmentatie" #: network/netconnect.pm:1003 standalone/drakconnect:396 #, c-format msgid "Iwconfig command extra arguments" msgstr "Extra argumenten voor iwconfig-opdracht" #: network/netconnect.pm:1004 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwpconfig(8) man page for further information." msgstr "" "Hier kunt u enkele extra draadloos-parameter instellen zoals:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is reeds " "ingesteld als de hostnaam.\n" "\n" "Zie de iwpconfig(8) manpagina voor meer informatie." #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1011 standalone/drakconnect:397 #, c-format msgid "Iwspy command extra arguments" msgstr "Extra argumenten voor iwspy-opdracht" #: network/netconnect.pm:1012 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1020 standalone/drakconnect:398 #, c-format msgid "Iwpriv command extra arguments" msgstr "Extra argumenten voor iwpriv-opdracht" #: network/netconnect.pm:1021 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" "Iwpriv maakt het mogelijk optionele (private) parameters van een draadloze\n" "netwerkinterface in te stellen.\n" "\n" "Iwpriv gaat over parameters en instellingen specifiek voor ieder\n" "stuurprogramma (in tegenstelling tot iwconfig, die over algemene\n" "stuurprogramma's gaat).\n" "\n" "In theorie zou de documentatie van elk stuurprogramma aan moeten geven hoe\n" "de interface-specifieke opdrachten te gebruiken en wat hun effecten zijn.\n" "\n" "Zie de manpagina van iwpriv(8) voor meer informatie." #: network/netconnect.pm:1048 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Er is geen ethernet netwerk adapter op uw systeem gevonden.\n" "Ik kan dit type connectie niet opzetten." #: network/netconnect.pm:1052 standalone/drakgw:261 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Kies de netwerkinterface" #: network/netconnect.pm:1053 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Kiest u welke netwerkkaart u wilt gebruiken om te verbinden met Internet" #: network/netconnect.pm:1074 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Gelieve uw computernaam in te voeren.\n" "Het moet een volledige computernaam zijn, zoals ``mybox.mylab.myco.com''.\n" "U mag ook het IP-adres van de gateway invoeren als u er een heeft." #: network/netconnect.pm:1078 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "Tenslotte kunt u ook de IP-adressen van uw DNS-server intypen." #: network/netconnect.pm:1080 standalone/drakconnect:923 #, c-format msgid "Host name (optional)" msgstr "Hostnaam (optioneel)" #: network/netconnect.pm:1080 #, c-format msgid "Host name" msgstr "Hostnaam" #: network/netconnect.pm:1082 #, c-format msgid "DNS server 1" msgstr "DNS server 1" #: network/netconnect.pm:1083 #, c-format msgid "DNS server 2" msgstr "DNS server 2" #: network/netconnect.pm:1084 #, c-format msgid "DNS server 3" msgstr "DNS server 3" #: network/netconnect.pm:1085 #, c-format msgid "Search domain" msgstr "Zoekdomein" #: network/netconnect.pm:1086 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" "Gewoonlijk wordt het zoekdomein ingesteld vanuit de volledig gekwalificeerde " "hostnaam" #: network/netconnect.pm:1087 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (bijvoorbeeld %s)" #: network/netconnect.pm:1089 #, c-format msgid "Gateway device" msgstr "Gateway apparaat" #: network/netconnect.pm:1098 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Het DNS-serveradres moet in het formaat 1.2.3.4 staan" #: network/netconnect.pm:1103 standalone/drakconnect:611 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Het gateway-adres moet in het formaat 1.2.3.4 staan" #: network/netconnect.pm:1114 #, c-format msgid "" "Enter a Zeroconf host name which will be the one that your machine will get " "back to other machines on the network:" msgstr "" "Voer een Zeroconf hostnaam in welke uw computer zal teruggeven aan andere " "computers op het netwerk:" #: network/netconnect.pm:1115 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf hostnaam" #: network/netconnect.pm:1118 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zeroconf-hostnaam mag geen . bevatten" #: network/netconnect.pm:1128 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "U heeft meerdere manieren om te verbinden met het Internet ingesteld.\n" "Kies degene die u wenst te gebruiken.\n" "\n" #: network/netconnect.pm:1130 #, c-format msgid "Internet connection" msgstr "Internetverbinding" #: network/netconnect.pm:1144 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Configuratie is voltooid, wilt u de instellingen toepassen?" #: network/netconnect.pm:1154 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Wenst u bij het opstarten uw connectie te starten?" #: network/netconnect.pm:1166 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Het netwerk dient herstart te worden. Wilt u het herstarten?" #: network/netconnect.pm:1173 network/netconnect.pm:1238 #, c-format msgid "Network Configuration" msgstr "Netwerk-instellingen" #: network/netconnect.pm:1174 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Een probleem deed zich voor bij het herstarten van het netwerk:\n" "\n" "%s" #: network/netconnect.pm:1182 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Wenst u nu te proberen een connectie te maken met Internet?" #: network/netconnect.pm:1190 standalone/drakconnect:955 #, c-format msgid "Testing your connection..." msgstr "Bezig met testen van uw connectie..." #: network/netconnect.pm:1206 #, c-format msgid "The system is now connected to the Internet." msgstr "Het systeem is op dit moment aangesloten op het Internet." #: network/netconnect.pm:1207 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Vanwege beveiligingsredenen wordt de verbinding nu verbroken." #: network/netconnect.pm:1208 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Het lijkt erop dat dit systeem niet aangesloten is op\n" "het internet. Probeer uw verbinding opnieuw in te stellen." #: network/netconnect.pm:1225 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "We raden u aan om nadat dit gebeurd is, uw X omgeving\n" "te herstarten om het hostnaam-veranderingprobleem\n" "te voorkomen." #: network/netconnect.pm:1226 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Er zijn problemen opgetreden tijdens de configuratie.\n" "Test uw verbinding via net_monitor of mcc. Indien uw verbinding niet werkt, " "kunt u proberen de configuratie opnieuw op te starten." #: network/netconnect.pm:1239 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Omdat u een netwerk-installatie uitvoert, is uw netwerk reeds ingesteld.\n" "Klik op OK om uw instellingen te behouden, of op Annuleren om uw Internet & " "Netwerkverbinding opnieuw in te stellen.\n" #: network/netconnect.pm:1327 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Een onverwachte fout is opgetreden:\n" "%s" #: network/network.pm:315 #, c-format msgid "Proxies configuration" msgstr "Configuratie van proxy('s)" #: network/network.pm:316 #, c-format msgid "HTTP proxy" msgstr "HTTP-proxy" #: network/network.pm:317 #, c-format msgid "FTP proxy" msgstr "FTP-proxy" #: network/network.pm:320 #, c-format msgid "Proxy should be http://..." msgstr "Proxy moet http://... zijn" #: network/network.pm:321 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL moet beginnen met 'ftp:' of 'http:'" #: network/shorewall.pm:28 #, c-format msgid "Firewalling configuration detected!" msgstr "Firewall configuratie bespeurd!" #: network/shorewall.pm:29 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Waarschuwing! Een bestaande firewall configuratie is gevonden. U kunt " "misschien na de installatie een handmatige aanpassing nodig hebben." #: network/shorewall.pm:77 standalone/drakgw:218 standalone/drakvpn:212 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Voer de naam in van het netwerkapparaat verbonden met het internet.\n" "\n" "Voorbeelden:\n" "\t\tppp+ voor modem- of DSL-verbindingen, \n" "\t\teth0, of eth1 voor een kabelverbinding, \n" "\t\tippp+ voor een ISDN-verbinding.\n" #: network/tools.pm:205 #, c-format msgid "Insert floppy" msgstr "Plaats een diskette" #: network/tools.pm:206 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Plaats een met het FAT-bestandssysteem geformatteerde diskette in station %s " "met %s in de hoofdmap en druk op %s" #: network/tools.pm:207 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "" "Probleem bij benaderen van diskette, niet in staat apparaat %s te koppelen" #: partition_table.pm:644 #, c-format msgid "mount failed: " msgstr "koppelen mislukt: " #: partition_table.pm:749 #, c-format msgid "Extended partition not supported on this platform" msgstr "Extended partitie niet ondersteund op dit platform" #: partition_table.pm:767 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Er zit een gat in uw partitietabel, maar ik kan het niet gebruiken.\n" "De enige oplossing is om uw primaire partitie te verplaatsen zodat het gat " "naast de extended partitie komt te liggen" #: partition_table.pm:854 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Het herstellen van bestand %s is niet gelukt: %s" #: partition_table.pm:856 #, c-format msgid "Bad backup file" msgstr "Slechte reservekopie" #: partition_table.pm:876 #, c-format msgid "Error writing to file %s" msgstr "Fout bij het schrijven naar bestand %s" #: partition_table/raw.pm:187 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Er is iets verdachts aan de gang op uw schijf. \n" "Een test om de integriteit van de gegevens de testen is mislukt.Dat betekent " "dat schrijven naar de schijf uiteindelijk\n" "tot willekeurige, beschadigde gegevens leidt." #: pkgs.pm:24 #, c-format msgid "must have" msgstr "must-have" #: pkgs.pm:25 #, c-format msgid "important" msgstr "belangrijk" #: pkgs.pm:26 #, c-format msgid "very nice" msgstr "heel leuk" #: pkgs.pm:27 #, c-format msgid "nice" msgstr "leuk" #: pkgs.pm:28 #, c-format msgid "maybe" msgstr "misschien" #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(aan %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(aan deze machine)" #: printer/cups.pm:115 standalone/printerdrake:197 #, c-format msgid "Configured on other machines" msgstr "Geconfigureerd op andere computers" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "Op CUPS-server \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:3989 #: printer/printerdrake.pm:3998 printer/printerdrake.pm:4139 #: printer/printerdrake.pm:4150 printer/printerdrake.pm:4362 #, c-format msgid " (Default)" msgstr " (Standaard)" #: printer/data.pm:22 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: printer/data.pm:23 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:34 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:35 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:56 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:57 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:82 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: printer/detect.pm:148 printer/detect.pm:226 printer/detect.pm:428 #: printer/detect.pm:465 printer/printerdrake.pm:686 #, c-format msgid "Unknown Model" msgstr "Onbekend model" #: printer/main.pm:28 #, c-format msgid "Local printer" msgstr "Lokale printer" #: printer/main.pm:29 #, c-format msgid "Remote printer" msgstr "Netwerk printer" #: printer/main.pm:30 #, c-format msgid "Printer on remote CUPS server" msgstr "Printer aan CUPS server op afstand" #: printer/main.pm:31 printer/printerdrake.pm:1406 #, c-format msgid "Printer on remote lpd server" msgstr "Printer aan lpd server op afstand" #: printer/main.pm:32 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Netwerkprinter (TCP/Socket)" #: printer/main.pm:33 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Printer aan SMB/Windows 95/98/NT server" #: printer/main.pm:34 #, c-format msgid "Printer on NetWare server" msgstr "Printer aan NetWare server" #: printer/main.pm:35 printer/printerdrake.pm:1410 #, c-format msgid "Enter a printer device URI" msgstr "Voer een apparaat-URI voor de printer in" #: printer/main.pm:36 #, c-format msgid "Pipe job into a command" msgstr "Taak doorsluizen naar een opdracht" #: printer/main.pm:306 printer/main.pm:574 printer/main.pm:1544 #: printer/main.pm:2228 printer/main.pm:2239 printer/printerdrake.pm:1866 #: printer/printerdrake.pm:4396 #, c-format msgid "Unknown model" msgstr "Onbekend model" #: printer/main.pm:331 standalone/printerdrake:196 #, c-format msgid "Configured on this machine" msgstr "Geconfigureerd op deze machine" #: printer/main.pm:337 printer/printerdrake.pm:963 #, c-format msgid " on parallel port #%s" msgstr " op parallelle poort #%s" #: printer/main.pm:340 printer/printerdrake.pm:965 #, c-format msgid ", USB printer #%s" msgstr ", USB printer #%s" #: printer/main.pm:342 #, c-format msgid ", USB printer" msgstr ", USB printer" #: printer/main.pm:347 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", multi-functioneel apparaat op parallelle poort #%s" #: printer/main.pm:350 #, c-format msgid ", multi-function device on a parallel port" msgstr ", multi-functioneel apparaat op parallelle poort" #: printer/main.pm:352 #, c-format msgid ", multi-function device on USB" msgstr ", multi-functioneel apparaat op USB" #: printer/main.pm:354 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ". multi-functioneel apparaat op HP JetDirect" #: printer/main.pm:356 #, c-format msgid ", multi-function device" msgstr ", multi-functioneel apparaat" #: printer/main.pm:359 #, c-format msgid ", printing to %s" msgstr ", bezig met printen naar %s" #: printer/main.pm:361 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " op LPD server \"%s\", printer \"%s\"" #: printer/main.pm:363 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP host \"%s\", poort %s" #: printer/main.pm:367 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " op SMB/Windows server \"%s\", share \"%s\"" #: printer/main.pm:371 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " op Novell server \"%s\", printer \"%s\"" #: printer/main.pm:373 #, c-format msgid ", using command %s" msgstr ", met gebruik van opdracht %s" #: printer/main.pm:388 #, c-format msgid "Parallel port #%s" msgstr "Parallelle poort #%s" #: printer/main.pm:391 printer/printerdrake.pm:979 #: printer/printerdrake.pm:1002 printer/printerdrake.pm:1020 #, c-format msgid "USB printer #%s" msgstr "USB printer #%s" #: printer/main.pm:393 #, c-format msgid "USB printer" msgstr "USB printer" #: printer/main.pm:398 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Multi-functioneel apparaat op parallelle poort #%s" #: printer/main.pm:401 #, c-format msgid "Multi-function device on a parallel port" msgstr "Multi-functioneel apparaat op parallelle poort" #: printer/main.pm:403 #, c-format msgid "Multi-function device on USB" msgstr "Multi-functioneel apparaat op USB" #: printer/main.pm:405 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Multi-functioneel apparaat op HP JetDirect" #: printer/main.pm:407 #, c-format msgid "Multi-function device" msgstr "Multi-functioneel apparaat" #: printer/main.pm:410 #, c-format msgid "Prints into %s" msgstr "Drukt af naar %s" #: printer/main.pm:412 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD server \"%s\", printer \"%s\"" #: printer/main.pm:414 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP host \"%s\", poort %s" #: printer/main.pm:418 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows server \"%s\", share \"%s\"" #: printer/main.pm:422 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novell server \"%s\", printer \"%s\"" #: printer/main.pm:424 #, c-format msgid "Uses command %s" msgstr "Gebruikt opdracht %s" #: printer/main.pm:426 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:571 printer/printerdrake.pm:732 #: printer/printerdrake.pm:2463 #, c-format msgid "Raw printer (No driver)" msgstr "Raw printer (geen stuurprogramma)" #: printer/main.pm:1085 printer/printerdrake.pm:179 #: printer/printerdrake.pm:191 #, c-format msgid "Local network(s)" msgstr "Lokale netwerk(en)" #: printer/main.pm:1087 printer/printerdrake.pm:195 #, c-format msgid "Interface \"%s\"" msgstr "Interface \"%s\"" #: printer/main.pm:1089 #, c-format msgid "Network %s" msgstr "Netwerk %s" #: printer/main.pm:1091 #, c-format msgid "Host %s" msgstr "Computer %s" #: printer/main.pm:1120 #, c-format msgid "%s (Port %s)" msgstr "%s (Poort %s)" #: printer/printerdrake.pm:22 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "De HP LaserJet 1000 moet, na te zijn aangezet, zijn firmware ge-upload " "krijgen. Download het Windows-stuurprogramma van de HP website (de firmware " "op de CD bij de printer werkt niet) en extraheer het firmware bestand eruit " "door het zelf-uitpakkende '.exe'-bestand te decomprimeren met het 'unzip' " "hulpprogramma en te zoeken naar het bestand 'sihp1000.img'. Kopiëer dit " "bestand naar de '/etc/printer' map. Daar zal het te vinden zijn voor het " "script dat automatisch de firmware uploadt elke keer wanneer de printer is " "aangesloten en aangezet.\n" #: printer/printerdrake.pm:62 #, c-format msgid "CUPS printer configuration" msgstr "CUPS printerconfiguratie" #: printer/printerdrake.pm:63 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Hier kunt u bepalen of de printers verbonden aan deze computer toegankelijk " "dienen te zijn voor computers op afstand, en voor welke." #: printer/printerdrake.pm:64 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Hier kunt u ook bepalen of printers op computers op afstand automatisch " "beschikbaar gemaakt dienen te worden op deze computer." #: printer/printerdrake.pm:67 #, c-format msgid "The printers on this machine are available to other computers" msgstr "De printers op deze computer zijn beschikbaar voor andere computers" #: printer/printerdrake.pm:69 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Beschikbare printers aan computers op afstand automatisch bespeuren" #: printer/printerdrake.pm:71 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Printers delen op hosts/netwerken: " #: printer/printerdrake.pm:73 #, c-format msgid "Custom configuration" msgstr "Aangepaste configuratie" #: printer/printerdrake.pm:78 standalone/scannerdrake:561 #: standalone/scannerdrake:578 #, c-format msgid "No remote machines" msgstr "Geen computers op afstand" #: printer/printerdrake.pm:88 #, c-format msgid "Additional CUPS servers: " msgstr "Meer CUPS-servers: " #: printer/printerdrake.pm:93 #, c-format msgid "None" msgstr "Geen" #: printer/printerdrake.pm:95 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "Om toegang te krijgen tot printers aan CUPS-servers op afstand in uw lokale " "netwerk hoeft u slechts de optie \"Beschikbare printers aan computers op " "afstand automatisch bespeuren\"aan te zetten; CUPS-servers informeren uw " "machine automatisch over hun printers. Alle printers die op dit moment " "bekend zijn bij uw computer zijn vermeld in het \"Printers op afstand\"-veld " "in het hoofdvenster van Printerdrake. Als uw CUPS-server zich niet bevindt " "in uw lokale netwerk, dan geeft u het IP-adres van de CUPS-server(s) in en " "optioneelhet poortnummer om de printerinformatie van de server(s) op te " "vragen." #: printer/printerdrake.pm:100 #, c-format msgid "Japanese text printing mode" msgstr "Japanse tekstafdrukmodus" #: printer/printerdrake.pm:101 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Dit aanzetten stelt u in staat platte tekstbestanden in het Japans af te " "drukken. Gebruik deze functie slechts als u echt tekst in het Japans wilt " "afdrukken; wanneer hij is geactiveerd dan kunt u geen geaccentueerde tekens " "meer afdrukken in Latijnse lettertypen en zult u de kantlijnen, " "tekengrootte, etc. niet meer kunnen aanpassen. Deze instelling heeft slechts " "effect op printers aangesloten op deze computer. Mocht u Japanse tekst " "willen afdrukken naar een printer aan een computer op afstand dan dient u " "deze functie te activeren op die andere computer." #: printer/printerdrake.pm:105 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Automatische correctie van CUPS-configuratie" #: printer/printerdrake.pm:107 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Wanneer deze optie is ingeschakeld, dan wordt bij iedere start van CUPS " "verzekerd dat\n" "\n" "- als LPD/LPRng geïnstalleerd is, wordt /etc/printcap niet overschreven door " "CUPS\n" "\n" "- als /etc/cups/cupsd.conf ontbreekt, dan wordt het aangemaakt\n" "\n" "- wanneer printerinformatie wordt bekendgemaakt, bevat het niet \"localhost" "\" als de servernaam.\n" "\n" "Als enkele van deze maatregelen tot problemen voor u leiden, zet deze optie " "dan uit, maar dan dient u zorg te dragen voor deze punten." #: printer/printerdrake.pm:129 printer/printerdrake.pm:205 #, c-format msgid "Sharing of local printers" msgstr "Lokale printers delen" #: printer/printerdrake.pm:130 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Dit zijn de computers en netwerken waarop de lokaal verbonden printer(s) " "beschikbaar dienen te zijn:" #: printer/printerdrake.pm:141 #, c-format msgid "Add host/network" msgstr "Host/netwerk toevoegen" #: printer/printerdrake.pm:147 #, c-format msgid "Edit selected host/network" msgstr "Geselecteerde host/netwerk bewerken" #: printer/printerdrake.pm:156 #, c-format msgid "Remove selected host/network" msgstr "Geselecteerde host/netwerk verwijderen" #: printer/printerdrake.pm:187 printer/printerdrake.pm:197 #: printer/printerdrake.pm:210 printer/printerdrake.pm:217 #: printer/printerdrake.pm:248 printer/printerdrake.pm:266 #, c-format msgid "IP address of host/network:" msgstr "IP-adres van host/netwerk:" #: printer/printerdrake.pm:206 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" "Kies het netwerk of de host waarop de lokale printers beschikbaar moeten " "worden gemaakt:" #: printer/printerdrake.pm:213 #, c-format msgid "Host/network IP address missing." msgstr "IP-adres van host/netwerk ontbreekt." #: printer/printerdrake.pm:221 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Het ingevoerde host/netwerk-IP is niet correct.\n" #: printer/printerdrake.pm:222 printer/printerdrake.pm:400 #, c-format msgid "Examples for correct IPs:\n" msgstr "Voorbeelden van correcte IP's:\n" #: printer/printerdrake.pm:246 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" "Deze host/netwerk staat reeds in de lijst, hij kan niet nogmaals worden " "toegevoegd.\n" #: printer/printerdrake.pm:316 printer/printerdrake.pm:387 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Benaderen van printers aan CUPS servers op afstand" #: printer/printerdrake.pm:317 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Voeg hier de CUPS-servers toe waarvan u de printers wilt gebruiken. U hoeft " "dit alleen te doen als deze servers hun printerinformatie niet bekendmaken " "aan het lokale netwerk." #: printer/printerdrake.pm:328 #, c-format msgid "Add server" msgstr "Server toevoegen" #: printer/printerdrake.pm:334 #, c-format msgid "Edit selected server" msgstr "Geselecteerde server bewerken" #: printer/printerdrake.pm:343 #, c-format msgid "Remove selected server" msgstr "Geselecteerde server verwijderen" #: printer/printerdrake.pm:388 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Geef het IP-adres en de poort van de computer waarvan u de printers wilt " "gebruiken." #: printer/printerdrake.pm:389 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "Als geen poort is gegeven dan wordt 631 als standaardwaarde genomen." #: printer/printerdrake.pm:393 #, c-format msgid "Server IP missing!" msgstr "IP van server ontbreekt!" #: printer/printerdrake.pm:399 #, c-format msgid "The entered IP is not correct.\n" msgstr "Het ingevoerde IP-nummer is niet correct.\n" #: printer/printerdrake.pm:411 printer/printerdrake.pm:1629 #, c-format msgid "The port number should be an integer!" msgstr "Het poortnummer moet een geheel getal zijn!" #: printer/printerdrake.pm:422 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" "Deze server staat reeds in de lijst, hij kan niet nogmaals worden " "toegevoegd.\n" #: printer/printerdrake.pm:433 printer/printerdrake.pm:1650 #: standalone/drakups:233 standalone/harddrake2:64 #, c-format msgid "Port" msgstr "Poort" #: printer/printerdrake.pm:478 printer/printerdrake.pm:545 #: printer/printerdrake.pm:610 printer/printerdrake.pm:628 #: printer/printerdrake.pm:711 printer/printerdrake.pm:768 #: printer/printerdrake.pm:794 printer/printerdrake.pm:1703 #: printer/printerdrake.pm:1886 printer/printerdrake.pm:1902 #: printer/printerdrake.pm:1945 printer/printerdrake.pm:1982 #: printer/printerdrake.pm:2024 printer/printerdrake.pm:2061 #: printer/printerdrake.pm:2071 printer/printerdrake.pm:2314 #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2458 #: printer/printerdrake.pm:2568 printer/printerdrake.pm:3069 #: printer/printerdrake.pm:3134 printer/printerdrake.pm:3177 #: printer/printerdrake.pm:3180 printer/printerdrake.pm:3299 #: printer/printerdrake.pm:3364 printer/printerdrake.pm:3436 #: printer/printerdrake.pm:3457 printer/printerdrake.pm:3466 #: printer/printerdrake.pm:3557 printer/printerdrake.pm:3655 #: printer/printerdrake.pm:3661 printer/printerdrake.pm:3674 #: printer/printerdrake.pm:3726 printer/printerdrake.pm:3766 #: printer/printerdrake.pm:3778 printer/printerdrake.pm:3789 #: printer/printerdrake.pm:3798 printer/printerdrake.pm:3811 #: printer/printerdrake.pm:3888 printer/printerdrake.pm:3945 #: printer/printerdrake.pm:4010 printer/printerdrake.pm:4270 #: printer/printerdrake.pm:4313 printer/printerdrake.pm:4459 #: printer/printerdrake.pm:4517 printer/printerdrake.pm:4546 #: standalone/printerdrake:65 standalone/printerdrake:85 #: standalone/printerdrake:515 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:479 #, c-format msgid "Restarting CUPS..." msgstr "Herstarten van CUPS..." #: printer/printerdrake.pm:502 #, c-format msgid "Select Printer Connection" msgstr "Selecteer Printer-verbinding" #: printer/printerdrake.pm:503 #, c-format msgid "How is the printer connected?" msgstr "Hoe is de printer aangesloten?" #: printer/printerdrake.pm:505 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Printers aan CUPS-servers op afstand hoeft u hier niet te configureren; deze " "printers zullen automatisch bespeurd worden." #: printer/printerdrake.pm:508 printer/printerdrake.pm:4012 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" "\n" "WAARSCHUWING: Geen lokale netwerkverbinding actief, kan printers op afstand " "niet bespeuren of testen!" #: printer/printerdrake.pm:515 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" "Automatische printerbespeuring (Lokaal, TCP/Socket, SMB-printers en apparaat-" "URI)" #: printer/printerdrake.pm:545 #, c-format msgid "Checking your system..." msgstr "Bezig met controleren van uw systeem..." #: printer/printerdrake.pm:561 #, c-format msgid "and one unknown printer" msgstr "en één onbekende printer" #: printer/printerdrake.pm:563 #, c-format msgid "and %d unknown printers" msgstr "en %d onbekende printers" #: printer/printerdrake.pm:567 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "De volgende printers\n" "\n" "%s%s\n" "zijn direct op uw systeem aangesloten" #: printer/printerdrake.pm:569 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "De volgende printers\n" "\n" "%s%s\n" "zijn direct op uw systeem aangesloten" #: printer/printerdrake.pm:570 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "De volgende printer\n" "\n" "%s%s\n" "is direct op uw systeem aangesloten" #: printer/printerdrake.pm:574 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Er is één onbekende printer direct aan uw systeem verbonden" #: printer/printerdrake.pm:575 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Er zijn %d onbekende printers direct aan uw systeem verbonden" #: printer/printerdrake.pm:578 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" "Er zijn geen printers gevonden die direct aan uw machine verbonden zijn" #: printer/printerdrake.pm:581 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Zorg ervoor dat al uw printers verbonden zijn en aangezet).\n" #: printer/printerdrake.pm:594 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Wilt u afdrukken mogelijk maken voor de bovengenoemde printers of op " "printers in het lokale netwerk?\n" #: printer/printerdrake.pm:595 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Wilt u afdrukken inschakelen voor printers op het lokale netwerk?\n" #: printer/printerdrake.pm:597 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Wilt u afdrukken inschakelen op de hierboven genoemde printers?\n" #: printer/printerdrake.pm:598 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Weet u zeker dat u afdrukken op deze computer wilt inschakelen?\n" #: printer/printerdrake.pm:599 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "OPMERKING: Afhankelijk van het printermodel en het afdruksysteem zal tot %d " "MB aan extra software worden geïnstalleerd." #: printer/printerdrake.pm:629 #, c-format msgid "Searching for new printers..." msgstr "Bezig met zoeken naar nieuwe printers..." #: printer/printerdrake.pm:713 #, c-format msgid "Configuring printer ..." msgstr "Configureren van printer..." #: printer/printerdrake.pm:714 printer/printerdrake.pm:769 #: printer/printerdrake.pm:3790 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Bezig met instellen van printer \"%s\" ..." #: printer/printerdrake.pm:734 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:735 #, c-format msgid " on " msgstr " aan" #: printer/printerdrake.pm:736 standalone/scannerdrake:136 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:741 printer/printerdrake.pm:2470 #, c-format msgid "Printer model selection" msgstr "Selectie van printer-model" #: printer/printerdrake.pm:742 printer/printerdrake.pm:2471 #, c-format msgid "Which printer model do you have?" msgstr "Welk model printer heeft u?" #: printer/printerdrake.pm:743 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake kan niet bepalen welk model uw printer %s is. Kiest u het " "juiste model uit de lijst." #: printer/printerdrake.pm:746 printer/printerdrake.pm:2476 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Indien uw printer niet getoond wordt, kies dan een compatibel model (zie uw " "printerhandleiding) of één die er op lijkt." #: printer/printerdrake.pm:795 printer/printerdrake.pm:3779 #: printer/printerdrake.pm:3946 printer/printerdrake.pm:4271 #: printer/printerdrake.pm:4314 printer/printerdrake.pm:4518 #, c-format msgid "Configuring applications..." msgstr "Bezig met instellen van toepassingen ..." #: printer/printerdrake.pm:831 printer/printerdrake.pm:843 #: printer/printerdrake.pm:901 printer/printerdrake.pm:1872 #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4211 #, c-format msgid "Add a new printer" msgstr "Printer toevoegen" #: printer/printerdrake.pm:832 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Welkom bij de Printerinstellingen-wizard\n" "\n" "Deze wizard laat u lokale- of afstand-printers installeren die vanaf deze of " "andere computers in het netwerk gebruikt gaan worden.\n" "\n" "Het zal u vragen naar alle benodigde informatie om de printer in te stellen " "en geeft u toegang tot alle beschikbare printer-stuurprogramma's, " "stuurprogramma-opties en printerverbindingtypes." #: printer/printerdrake.pm:845 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Welkom bij de Printerinstellingen-wizard.\n" "\n" "Deze wizard helpt u de printer(s) te installeren die aan uw computer, direct " "aan het netwerk of aan een Windows-computer op afstand verbonden zijn.\n" "\n" "Als u printer(s) verbonden heeft aan deze computer, zet deze dan aan zodat " "ze automatisch gevonden kunnen worden. Uw netwerkprinter(s) en Windows-" "computers moeten ook verbonden en aangezet zijn.\n" "\n" "Merk op dat het automatisch bespeuren van printers op het netwerk langer " "duurt dan de automatische bespeuring van printers verbonden aan deze " "computer. U kunt dus beter de automatische bespeuring van netwerk- en/of " "Windowsprinters uitzetten wanneer u deze niet nodig heeft.\n" "\n" " Klik op \"Volgende\" wanneer u gereed bent, en \"Annuleren\" indien u niet " "op dit moment uw printer(s) wilt instellen." #: printer/printerdrake.pm:854 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Welkom bij de Printerinstellingen-wizard.\n" "\n" "Deze wizard helpt u uw printer(s) te installeren die aan deze computer " "verbonden zijn.\n" "\n" "Als u printer(s) aangesloten hebt op deze computer, zet deze dan aan zodat " "ze automatisch gevonden kunnen worden.\n" "\n" " Klik op \"Volgende\" wanneer u gereed bent, en \"Annuleren\" indien u niet " "op dit moment uw printer(s) wilt instellen." #: printer/printerdrake.pm:862 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Welkom bij de Printerinstellingen-wizard.\n" "\n" "Deze wizard helpt u uw printer(s) te installeren die aan uw computer of " "direct aan het netwerk verbonden zijn.\n" "\n" "Als u printer(s) verbonden heeft aan deze computer, zet deze dan aan zodat " "ze automatisch gevonden kunnen worden. Uw netwerkprinter(s) moeten ook " "verbonden en aangezet zijn.\n" "\n" "Merk op dat het automatisch bespeuren van printers op het netwerk langer " "duurt dan de automatische bespeuring van printers verbonden aan deze " "computer. U kunt dus beter de automatische bespeuring van netwerkprinters " "uitzetten wanneer u deze niet nodig heeft.\n" "\n" " Klik op \"Volgende\" wanneer u gereed bent, en \"Annuleren\" indien u niet " "op dit moment uw printer(s) wilt instellen." #: printer/printerdrake.pm:871 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Welkom bij de Printerinstellingen-wizard.\n" "\n" "Deze wizard helpt u uw printer(s) te installeren die aan deze computer " "verbonden zijn.\n" "\n" "Als u printer(s) aangesloten hebt op deze computer, zet deze dan aan zodat " "ze automatisch gevonden kunnen worden.\n" "\n" " Klik op \"Volgende\" wanneer u gereed bent, en \"Annuleren\" indien u niet " "op dit moment uw printer(s) wilt instellen." #: printer/printerdrake.pm:880 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Automatisch bespeuren van printers verbonden aan deze computer" #: printer/printerdrake.pm:883 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Automatisch bespeuren van printers direct verbonden aan lokaal netwerk" #: printer/printerdrake.pm:886 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Automatisch bespeuren van printers verbonden aan computers die Microsoft " "Windows draaien" #: printer/printerdrake.pm:902 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "Gefeliciteerd, uw printer is nu geïnstalleerd en geconfigureerd!\n" "\n" "U kunt afdrukken met de \"Afdrukken\"-opdracht in uw toepassingen (normaal " "gesproken in het \"Bestand\"-menu).\n" "\n" "Indien u een printer wilt toevoegen, verwijderen of hernoemen, of indien u " "de standaard instellingen wilt wijzigen (papierinvoer-tray, " "afdrukkwaliteit, ...), selecteert u dan \"Printer\" in het \"Apparatuur\"-" "gedeelte van het %s Configuratiecentrum." #: printer/printerdrake.pm:937 printer/printerdrake.pm:1152 #: printer/printerdrake.pm:1214 printer/printerdrake.pm:1304 #: printer/printerdrake.pm:1441 printer/printerdrake.pm:1516 #: printer/printerdrake.pm:1667 printer/printerdrake.pm:1750 #: printer/printerdrake.pm:1759 printer/printerdrake.pm:1768 #: printer/printerdrake.pm:1779 printer/printerdrake.pm:1892 #: printer/printerdrake.pm:1954 printer/printerdrake.pm:1988 #, c-format msgid "Could not install the %s packages!" msgstr "Kan de %s-pakketten niet installeren!" #: printer/printerdrake.pm:939 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "Zoeken naar Windows/SMB-servers wordt overgeslagen" #: printer/printerdrake.pm:945 printer/printerdrake.pm:1075 #: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563 #, c-format msgid "Printer auto-detection" msgstr "Automatische printerbespeuring" #: printer/printerdrake.pm:945 #, c-format msgid "Detecting devices..." msgstr "Zoeken naar apparaten..." #: printer/printerdrake.pm:967 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", netwerkprinter \"%s\", poort %s" #: printer/printerdrake.pm:969 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", printer \"%s\" aan SMB/Windows server \"%s\"" #: printer/printerdrake.pm:973 #, c-format msgid "Detected %s" msgstr "%s bespeurd" #: printer/printerdrake.pm:977 printer/printerdrake.pm:1000 #: printer/printerdrake.pm:1017 #, c-format msgid "Printer on parallel port #%s" msgstr "Printer op parallelle poort #%s" #: printer/printerdrake.pm:981 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Netwerkprinter \"%s\", poort %s" #: printer/printerdrake.pm:983 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Printer \"%s\" aan SMB/Windows server \"%s\"" #: printer/printerdrake.pm:1062 #, c-format msgid "Local Printer" msgstr "Lokale printer" #: printer/printerdrake.pm:1063 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Geen lokale printer gevonden! Om met de hand een printer te installeren, " "voert u een apparaat- of bestandsnaam in op de invoerregel. (Parallelle " "poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:,LPT2:, ..., 1ste USB " "printer: /dev/usb/lp0, 2de USB printer: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1067 #, c-format msgid "You must enter a device or file name!" msgstr "U dient een apparaat of bestandsnaam in te voeren!" #: printer/printerdrake.pm:1076 #, c-format msgid "No printer found!" msgstr "Geen printer gevonden!" #: printer/printerdrake.pm:1084 #, c-format msgid "Local Printers" msgstr "Lokale printers" #: printer/printerdrake.pm:1085 #, c-format msgid "Available printers" msgstr "Beschikbare printers" #: printer/printerdrake.pm:1089 printer/printerdrake.pm:1098 #, c-format msgid "The following printer was auto-detected. " msgstr "De volgende printer is automatisch bespeurd. " #: printer/printerdrake.pm:1091 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Indien dit niet degene is die u wilt configureren, geef dan een apparaatnaam/" "bestandsnaam op de invoerregel" #: printer/printerdrake.pm:1092 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "U kunt ook een apparaatnaam/bestandsnaam specificeren op de invoerregel" #: printer/printerdrake.pm:1093 printer/printerdrake.pm:1102 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Hier volgt een lijst van alle automatisch bespeurde printers. " #: printer/printerdrake.pm:1095 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Kiest u de printer die u wenst in te stellen of geef een apparaatnaam/" "bestandsnaam op de invoerregel" #: printer/printerdrake.pm:1096 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Kiest u de printer waar de printopdrachten heen moeten of geef een " "apparaatnaam/bestandsnaam op de invoerregel" #: printer/printerdrake.pm:1100 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "De configuratie van de printer zal volledig automatisch gaan. Indien uw " "printer niet correct bespeurd is of indien u een aangepaste " "printerconfiguratie wenst, zet dan \"Handmatige configuratie\" aan." #: printer/printerdrake.pm:1101 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Op dit moment is er geen alternatief beschikbaar" #: printer/printerdrake.pm:1104 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "Kiest u de printer die u wenst in te stellen. De configuratie van de printer " "zal volledig automatisch gaan. Indien uw printer niet correct bespeurd is of " "indien u een aangepaste printerconfiguratie wenst, zet dan \"Handmatige " "configuratie\" aan." #: printer/printerdrake.pm:1105 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Kiest u de printer waar de afdruktaken heen moeten gaan." #: printer/printerdrake.pm:1107 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Kiest u de poort waaraan uw printer is verbonden of geef een apparaatnaam/" "bestandsnaam op de invoerregel" #: printer/printerdrake.pm:1108 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Kiest u de poort waaraan uw printer is verbonden." #: printer/printerdrake.pm:1110 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Parallelle poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:," "LPT2:, ..., 1ste USB printer: /dev/usb/lp0, 2de USB printer: /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1114 #, c-format msgid "You must choose/enter a printer/device!" msgstr "U dient een printer of apparaat te kiezen/in te voeren!" #: printer/printerdrake.pm:1154 printer/printerdrake.pm:1216 #: printer/printerdrake.pm:1306 printer/printerdrake.pm:1443 #: printer/printerdrake.pm:1518 printer/printerdrake.pm:1669 #: printer/printerdrake.pm:1752 printer/printerdrake.pm:1761 #: printer/printerdrake.pm:1770 printer/printerdrake.pm:1781 #, c-format msgid "Aborting" msgstr "Afbreken..." #: printer/printerdrake.pm:1189 #, c-format msgid "Remote lpd Printer Options" msgstr "lpd op afstand - Printer-opties" #: printer/printerdrake.pm:1190 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Om een lpd-printer op afstand te gebruiken, dient u de hostnaam van de " "printerserver en de printernaam op die server in te voeren." #: printer/printerdrake.pm:1191 #, c-format msgid "Remote host name" msgstr "Naam van host op afstand:" #: printer/printerdrake.pm:1192 #, c-format msgid "Remote printer name" msgstr "Naam van printer op afstand" #: printer/printerdrake.pm:1195 #, c-format msgid "Remote host name missing!" msgstr "De naam van de host op afstand ontbreekt!" #: printer/printerdrake.pm:1199 #, c-format msgid "Remote printer name missing!" msgstr "De naam van de printer op afstand ontbreekt!" #: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799 #: standalone/drakTermServ:465 standalone/drakTermServ:763 #: standalone/drakTermServ:779 standalone/drakTermServ:1417 #: standalone/drakTermServ:1425 standalone/drakTermServ:1436 #: standalone/drakbackup:582 standalone/drakbackup:687 #: standalone/drakbackup:722 standalone/drakbackup:840 #: standalone/drakconnect:263 standalone/drakconnect:298 #: standalone/drakconnect:542 standalone/drakconnect:552 #: standalone/drakconnect:576 standalone/harddrake2:160 #, c-format msgid "Information" msgstr "Informatie" #: printer/printerdrake.pm:1228 printer/printerdrake.pm:1799 #, c-format msgid "Detected model: %s %s" msgstr "Gevonden model: %s %s" #: printer/printerdrake.pm:1310 printer/printerdrake.pm:1563 #, c-format msgid "Scanning network..." msgstr "Bezig met afzoeken van het netwerk..." #: printer/printerdrake.pm:1321 printer/printerdrake.pm:1342 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", printer \"%s\" op server \"%s\"" #: printer/printerdrake.pm:1324 printer/printerdrake.pm:1345 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Printer \"%s\" op server \"%s\"" #: printer/printerdrake.pm:1366 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) Printer-opties" #: printer/printerdrake.pm:1367 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Om naar een SMB-printer af te drukken, dient u de SMB hostnaam (deze kan " "verschillen van de TCP/IP hostnaam) in te geven en mogelijk het IP-adres van " "de printserver, alsook de naam van de gedeelde printer waar u toegang tot " "wenst en, indien nodig, informatie over gebruikersnaam, wachtwoord en " "werkgroep." #: printer/printerdrake.pm:1368 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Als de gewenste printer automatisch gevonden is, kies hem dan eenvoudigweg " "uit de lijst en voeg zonodig de gebruikersnaam, wachtwoord en/of werkgroep " "toe." #: printer/printerdrake.pm:1370 #, c-format msgid "SMB server host" msgstr "SMB-server host" #: printer/printerdrake.pm:1371 #, c-format msgid "SMB server IP" msgstr "SMB-server IP" #: printer/printerdrake.pm:1372 #, c-format msgid "Share name" msgstr "Sharenaam" #: printer/printerdrake.pm:1375 #, c-format msgid "Workgroup" msgstr "Werkgroep" #: printer/printerdrake.pm:1377 #, c-format msgid "Auto-detected" msgstr "Automatisch gevonden" #: printer/printerdrake.pm:1387 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Ofwel de servernaam ofwel het IP van de server moet ingevoerd worden!" #: printer/printerdrake.pm:1391 #, c-format msgid "Samba share name missing!" msgstr "Naam van Samba-share ontbreekt!" #: printer/printerdrake.pm:1397 #, c-format msgid "SECURITY WARNING!" msgstr "VEILIGHEIDSWAARSCHUWING!" #: printer/printerdrake.pm:1398 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "U staat op het punt afdrukken via een Windows-account met wachtwoord in te " "stellen. Vanwege een fout in de architectuur van de samba clientsoftware " "wordt het wachtwoord als leesbare tekst op de opdrachtregel geplaatst van de " "Samba-client die de printtaak overzet naar de Windows-server. Dus het is " "mogelijk voor elke gebruiker op deze computer het wachtwoord te achterhalen " "door bijvoorbeeld opdrachten te geven als \"ps auxwww\".\n" "\n" "We raden daarom aan één van de volgende alternatieven te gebruiken (in alle " "gevallen raden we aan alleen lokale computers toegang te verschaffen tot de " "windows server, bijvoorbeeld door gebruik te maken van een firewall) :\n" "\n" "Gebruik een wachtwoordloze gebruikersnaam op de Windows-server, zoals de " "\"GUEST\" gebruiker of een speciale gebruiker alleen voor het afdrukken. " "Verwijder niet het wachtwoord van een gewone gebruikersnaam en zeker niet " "van de administrator-gebruiker.\n" "\n" "Stel de Windows-server in zodat deze de printer beschikbaar maakt onder het " "LPD-protocol. Stel vervolgens het afdrukken van deze computer in met het \"%s" "\" verbindingstype in Printerdrake.\n" "\n" #: printer/printerdrake.pm:1408 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Stel de windows server in om het IPP protocol beschikbaar te maken voor deze " "printer en stel het afdrukken voor deze computer in met de \"%s\" type in " "Printerdrake.\n" "\n" #: printer/printerdrake.pm:1411 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Verbind de printer met een Linux-server en laat de Windows computer(s) er " "als clients mee verbinden.\n" "\n" "Weet u zeker dat u het instellen van deze printer wilt vervolgen zoals u nu " "doet?" #: printer/printerdrake.pm:1489 #, c-format msgid "NetWare Printer Options" msgstr "NetWare Printer-Opties" #: printer/printerdrake.pm:1490 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Om naar een NetWare-printer af te drukken, dient u de NetWare Printer " "servernaam op te geven (deze kan verschillen met de TCP/IP computernaam!) " "alsook de naam van de printerwachtrij waar u toegang tot wilt en, indien " "nodig, een gebruikersnaam en wachtwoord." #: printer/printerdrake.pm:1491 #, c-format msgid "Printer Server" msgstr "Printer Server" #: printer/printerdrake.pm:1492 #, c-format msgid "Print Queue Name" msgstr "Naam van de printerwachtrij" #: printer/printerdrake.pm:1497 #, c-format msgid "NCP server name missing!" msgstr "NCP-servernaam is afwezig!" #: printer/printerdrake.pm:1501 #, c-format msgid "NCP queue name missing!" msgstr "NCP-wachtrijnaam is afwezig!" #: printer/printerdrake.pm:1574 printer/printerdrake.pm:1594 #, c-format msgid ", host \"%s\", port %s" msgstr ", host \"%s\", poort %s" #: printer/printerdrake.pm:1577 printer/printerdrake.pm:1597 #, c-format msgid "Host \"%s\", port %s" msgstr "Host \"%s\", poort %s" #: printer/printerdrake.pm:1618 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket Printer opties" #: printer/printerdrake.pm:1620 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Kies één van de automatisch bespeurde printers uit de lijst of vul de " "hostnaam / IP-adres en optioneel het poortnummer (standaard 9100) in op de " "invoervelden." #: printer/printerdrake.pm:1621 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Om naar een TCP- of socketprinter af te drukken, dient u de hostnaam of IP-" "adres van de printer en zonodig het poortnummer op te geven (standaardwaarde " "is 9100). Op HP JetDirect-servers is het poortnummer over het algemeen 9100, " "op andere servers kan het variëren. Kijk voor de zekerheid in het handboek " "van uw apparatuur." #: printer/printerdrake.pm:1625 #, c-format msgid "Printer host name or IP missing!" msgstr "Printer-hostnaam of IP-adres ontbreekt!" #: printer/printerdrake.pm:1648 #, c-format msgid "Printer host name or IP" msgstr "Printer-hostaam of IP-adres" #: printer/printerdrake.pm:1704 #, c-format msgid "Refreshing Device URI list..." msgstr "Verversen van apparaat-URI-lijst..." #: printer/printerdrake.pm:1707 printer/printerdrake.pm:1709 #, c-format msgid "Printer Device URI" msgstr "Printerapparaat URI" #: printer/printerdrake.pm:1708 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "U kunt de URI om de printer aan te spreken direct opgeven. De URI moet\n" "voldoen aan ofwel de CUPS-, ofwel de Foomatic specificaties. Let op dat\n" "niet alle URI-typen door alle \"spoolers\" ondersteund worden." #: printer/printerdrake.pm:1731 #, c-format msgid "A valid URI must be entered!" msgstr "Een geldige URI moet worden ingevoerd!" #: printer/printerdrake.pm:1834 #, c-format msgid "Pipe into command" msgstr "Doorsluizen naar een opdracht" #: printer/printerdrake.pm:1835 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Hier kunt u een arbitraire opdrachtregel specificeren waar de taak naartoe " "moet worden doorgesluisd in plaats van direct verzonden naar een printer." #: printer/printerdrake.pm:1836 #, c-format msgid "Command line" msgstr "Opdrachtregel" #: printer/printerdrake.pm:1840 #, c-format msgid "A command line must be entered!" msgstr "Een opdrachtregel dient te worden ingevoerd!" #: printer/printerdrake.pm:1873 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Is uw printer een multi-functioneel apparaat van HP of Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 met scanner, DeskJet 450, Sony IJP-V100), " "een HP PhotoSmart of een HP LaserJet 2200?" #: printer/printerdrake.pm:1887 #, c-format msgid "Installing HPOJ package..." msgstr "Bezig met installeren van HPOJ-pakket..." #: printer/printerdrake.pm:1894 #, c-format msgid "Only printing will be possible on the %s." msgstr "Op de %s kunt u alleen printen." #: printer/printerdrake.pm:1903 printer/printerdrake.pm:2025 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "Bezig met controleren en configureren van apparaat HPOJ..." #: printer/printerdrake.pm:1946 #, c-format msgid "Installing SANE packages..." msgstr "Bezig met installeren van SANE-pakketten..." #: printer/printerdrake.pm:1956 #, c-format msgid "Scanning on the %s will not be possible." msgstr "Scannen op de %s zal onmogelijk zijn." #: printer/printerdrake.pm:1983 #, c-format msgid "Installing mtools packages..." msgstr "Bezig met installeren van mtools-pakketten..." #: printer/printerdrake.pm:1990 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "Toegang tot foto-geheugenkaart op %s is onmogelijk." #: printer/printerdrake.pm:2005 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Scannen op uw HP multi-functioneel apparaat" #: printer/printerdrake.pm:2013 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "Toegang tot foto-geheugenkaart op uw HP multifunctioneel apparaat" #: printer/printerdrake.pm:2062 #, c-format msgid "Making printer port available for CUPS..." msgstr "Bezig met beschikbaar maken van printerpoort voor CUPS..." #: printer/printerdrake.pm:2071 printer/printerdrake.pm:2315 #: printer/printerdrake.pm:2459 #, c-format msgid "Reading printer database..." msgstr "Bezig met lezen van printer-database..." #: printer/printerdrake.pm:2281 #, c-format msgid "Enter Printer Name and Comments" msgstr "Voer de printernaam en opmerkingen in" #: printer/printerdrake.pm:2285 printer/printerdrake.pm:3421 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Een printernaam mag alleen letters, getallen en een laag liggend streepje " "bevatten" #: printer/printerdrake.pm:2291 printer/printerdrake.pm:3426 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "De printer \"%s\" bestaat reeds, \n" "weet u zeker dat u de configuratie ervan wilt overschrijven?" #: printer/printerdrake.pm:2300 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Elke printer heeft een naam nodig (bijvoorbeeld \"printer\"). De " "Beschrijving- en Locatie-velden behoeven niet te worden ingevuld. Dit zijn " "opmerkingen voor de gebruikers." #: printer/printerdrake.pm:2301 #, c-format msgid "Name of printer" msgstr "Naam van de printer" #: printer/printerdrake.pm:2302 standalone/drakconnect:557 #: standalone/harddrake2:40 standalone/printerdrake:212 #: standalone/printerdrake:219 #, c-format msgid "Description" msgstr "Beschrijving" #: printer/printerdrake.pm:2303 standalone/printerdrake:212 #: standalone/printerdrake:219 #, c-format msgid "Location" msgstr "Locatie" #: printer/printerdrake.pm:2320 #, c-format msgid "Preparing printer database..." msgstr "Bezig met voorbereiden van printer-database..." #: printer/printerdrake.pm:2438 #, c-format msgid "Your printer model" msgstr "Uw printermodel" #: printer/printerdrake.pm:2439 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake heeft de modelnaam die resulteerde uit de automatische " "bespeuring vergeleken met de modellen in de printer-database om de beste " "overeenkomst te vinden. Deze keuze kan onjuist zijn, in het bijzonder " "wanneer uw printer in het geheel niet in de database is opgenomen. Ga dus na " "of de keuze juist is en klik \"Het model is juist\" als dit het geval is en " "zoniet klikt u \"Handmatig model selecteren\" zodat u uw printermodel " "handmatig kunt kiezen op het volgende scherm.\n" "\n" "Voor uw printer heeft Printerdrake gevonden:\n" "\n" "%s" #: printer/printerdrake.pm:2444 printer/printerdrake.pm:2447 #, c-format msgid "The model is correct" msgstr "Het model is juist" #: printer/printerdrake.pm:2445 printer/printerdrake.pm:2446 #: printer/printerdrake.pm:2449 #, c-format msgid "Select model manually" msgstr "Handmatig model selecteren" #: printer/printerdrake.pm:2472 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "Gaat u na of Printerdrake het automatisch bespeuren van uw model printer " "correct heeft uitgevoerd. Zoek het juiste model in de lijst indien een " "onjuist model of \"Raw printer\" is opgelicht." #: printer/printerdrake.pm:2491 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "Door fabrikant geleverd PPD-bestand installeren" #: printer/printerdrake.pm:2522 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" "Elke PostScript-printer wordt geleverd met een PPD-bestand welke de opties " "en functies van de printer beschijft." #: printer/printerdrake.pm:2523 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" "Dit bestand bevindt zich normaal gesproken op de CD met Windows- en Mac-" "stuurprogramma's geleverd bij de printer." #: printer/printerdrake.pm:2524 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "U kunt de PPD-bestanden ook op de webstek van de fabrikant vinden." #: printer/printerdrake.pm:2525 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" "Als u Windows op uw computer geïnstalleerd heeft, dan kunt het PPD-bestand " "ook op uw Windows-partitie vinden." #: printer/printerdrake.pm:2526 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" "Het installeren van het PPD-bestand voor de printer en het gebruiken bij " "het instellen van de printer stelt alle printeropties beschikbaar die de " "printerapparatuur ondersteunt." #: printer/printerdrake.pm:2527 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" "Hier kunt u het PPD-bestand kiezen dat op uw computer geïnstalleerd moet " "worden, daarna is het bruikbaar voor het instellen van uw printer." #: printer/printerdrake.pm:2529 #, c-format msgid "Install PPD file from" msgstr "PPD-bestand installeren vanaf" #: printer/printerdrake.pm:2531 printer/printerdrake.pm:2538 #: standalone/scannerdrake:180 standalone/scannerdrake:188 #: standalone/scannerdrake:239 standalone/scannerdrake:246 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: printer/printerdrake.pm:2532 printer/printerdrake.pm:2540 #: standalone/scannerdrake:181 standalone/scannerdrake:190 #: standalone/scannerdrake:240 standalone/scannerdrake:248 #, c-format msgid "Floppy Disk" msgstr "Diskette" #: printer/printerdrake.pm:2533 printer/printerdrake.pm:2542 #: standalone/scannerdrake:182 standalone/scannerdrake:192 #: standalone/scannerdrake:241 standalone/scannerdrake:250 #, c-format msgid "Other place" msgstr "Andere lokatie" #: printer/printerdrake.pm:2548 #, c-format msgid "Select PPD file" msgstr "Selecteer PPD-bestand" #: printer/printerdrake.pm:2552 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "Het PPD-bestand %s bestaat niet of is onleesbaar!" #: printer/printerdrake.pm:2558 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "Het PPD-bestand %s voldoet niet aan de PPD-specificaties!" #: printer/printerdrake.pm:2569 #, c-format msgid "Installing PPD file..." msgstr "Installeren van PPD-bestand..." #: printer/printerdrake.pm:2682 #, c-format msgid "OKI winprinter configuration" msgstr "OKI winprinter-configuratie" #: printer/printerdrake.pm:2683 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "U configureert nu een OKI laser winprinter. Deze printers\n" "gebruiken een erg speciaal communicatieprotocol en daarom werken ze alleen " "indien verbonden met de eerste parallelle poort. Als uw printer verbonden is " "aan een andere poort of aan een printserver, verbindt u dan de printer aan " "de eerste parallelle poort voordat u een testpagina afdrukt, anders zal de " "printer niet werken. De instelling van het verbindingstype wordt door het " "stuurprogramma genegeerd." #: printer/printerdrake.pm:2707 printer/printerdrake.pm:2736 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark inkjet-configuratie" #: printer/printerdrake.pm:2708 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "De inkjet-printerstuurprogramma's die door Lexmark worden verstrekt " "ondersteunen alleen lokale printers, en geen printers-op-afstand of " "printservers. Gelieve uw printer aan een lokale poort te verbinden of hem te " "configureren op de machine waaraan hij is verbonden." #: printer/printerdrake.pm:2737 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Om met uw Lexmark inkjet en deze configuratie te kunnen afdrukken, heeft u " "de inkjet-printerstuurprogramma's nodig die door Lexmark (http://www.lexmark." "nl/) ter beschikking gesteld worden. Ga naar deze webpagina en klik op de " "\"Drivers\"-knop. Kies vervolgens \"Printer drivers\", uw model en daarna " "\"Linux\" als besturingssysteem. De stuurprogramma's komen in de vorm van " "RPM-pakketten of shell-scripts met interactieve grafische installatie. Het " "is niet nodig om deze configuratie met de grafische schillen te doen. " "Annuleer direct na de licentie-overeenkomst. Druk dan printkop-" "uitlijningpagina's af met \"lexmarkmaintain\" en pas de " "kopuitlijningsinstellingen aan met dit programma." #: printer/printerdrake.pm:2746 #, c-format msgid "Lexmark X125 configuration" msgstr "Lexmark X125-configuratie" #: printer/printerdrake.pm:2747 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "Het stuurprogramma voor deze printer ondersteunt alleen lokale printers " "verbonden via USB, en geen printers-op-afstand of printservers. Gelieve uw " "printer aan een lokale USB-poort te verbinden of hem te configureren op de " "machine waaraan hij is verbonden." #: printer/printerdrake.pm:2765 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Uploaden van firmware voor HP LaserJet 1000" #: printer/printerdrake.pm:2878 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Printer-standaardinstellingen\n" "\n" "Zorgt u ervoor dat de paginagrootte en de inktsoort/afdrukmodus (indien " "beschikbaar), alsmede de hardware-configuratie van laserprinters (geheugen, " "duplex-eenheid, extra trays) juist ingesteld zijn. Let op dat een zeer hoge " "printkwaliteit het afdrukken behoorlijk kan vertragen." #: printer/printerdrake.pm:3003 #, c-format msgid "Printer default settings" msgstr "Printer-standaardinstellingen" #: printer/printerdrake.pm:3010 #, c-format msgid "Option %s must be an integer number!" msgstr "Optie %s moet een geheel getal zijn!" #: printer/printerdrake.pm:3014 #, c-format msgid "Option %s must be a number!" msgstr "Optie %s moet een getal zijn!" #: printer/printerdrake.pm:3018 #, c-format msgid "Option %s out of range!" msgstr "Optie %s valt buiten het bereik!" #: printer/printerdrake.pm:3069 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Wenst u deze printer (\"%s\")\n" "als standaard printer in te stellen?" #: printer/printerdrake.pm:3084 #, c-format msgid "Test pages" msgstr "Test-pagina's" #: printer/printerdrake.pm:3085 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Selecteert u de test-pagina's die u af wenst te drukken.\n" "Let op: het kan een nogal lange tijd in beslag nemen voordat de foto-test-" "pagina is afgedrukt en op laserprinters met onvoldoende geheugen wordt deze " "wellicht helemaal niet afgedrukt. In de meeste gevallen is het voldoende om " "de standaard test-pagina af te drukken." #: printer/printerdrake.pm:3089 #, c-format msgid "No test pages" msgstr "Geen test-pagina's" #: printer/printerdrake.pm:3090 #, c-format msgid "Print" msgstr "Afdrukken" #: printer/printerdrake.pm:3115 #, c-format msgid "Standard test page" msgstr "Standaard testpagina" #: printer/printerdrake.pm:3118 #, c-format msgid "Alternative test page (Letter)" msgstr "Alternatieve test-pagina (Letter-formaat)" #: printer/printerdrake.pm:3121 #, c-format msgid "Alternative test page (A4)" msgstr "Alternatieve test-pagina (A4-formaat)" #: printer/printerdrake.pm:3123 #, c-format msgid "Photo test page" msgstr "Foto-testpagina" #: printer/printerdrake.pm:3127 #, c-format msgid "Do not print any test page" msgstr "Druk geen enkele testpagina af" #: printer/printerdrake.pm:3135 printer/printerdrake.pm:3300 #, c-format msgid "Printing test page(s)..." msgstr "Bezig met afdrukken van testpagina(s)..." #: printer/printerdrake.pm:3150 #, c-format msgid "Could not install the %s package!" msgstr "Kan het pakket %s niet installeren!" #: printer/printerdrake.pm:3152 #, c-format msgid "Skipping photo test page." msgstr "Foto-testpagina wordt overgeslagen." #: printer/printerdrake.pm:3169 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Testpagina('s) werd(en) naar de printer gestuurd.\n" "Het kan even duren voordat het eigenlijke afdrukken begint.\n" "Print-status:\n" "%s\n" "\n" #: printer/printerdrake.pm:3173 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Testpagina's) werd(en) naar de printer gestuurd.\n" "Het kan even duren voordat het eigenlijke afdrukken begint.\n" #: printer/printerdrake.pm:3180 #, c-format msgid "Did it work properly?" msgstr "Werkt het afdrukken naar behoren?" #: printer/printerdrake.pm:3201 printer/printerdrake.pm:4397 #, c-format msgid "Raw printer" msgstr "Kale ('raw') printer" #: printer/printerdrake.pm:3231 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Om een bestand vanaf de opdrachtregel (terminalvenster) af te drukken, " "gebruikt u ofwel de opdracht \"%s \", ofwel een grafisch " "printerhulpprogramma: \"xpp \" of \"kprinter \". Deze " "grafische hulpprogramma's stellen u in staat om de printer te kiezen en " "gemakkelijk de opties te wijzigen.\n" #: printer/printerdrake.pm:3233 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Deze opdrachten kunt u ook invullen in het \"Printopdracht\"-veld van " "afdrukdialogen van veel toepassingen. Maar vul daar dan geen bestandsnaam in " "omdat het af te drukken bestand wordt geleverd door de toepassing.\n" #: printer/printerdrake.pm:3236 printer/printerdrake.pm:3253 #: printer/printerdrake.pm:3263 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "De \"%s\"-opdracht geeft ook de mogelijkheid tot het wijzigen van de opties " "voor een specifieke printtaak. Voeg de gewenste instellingen eenvoudigweg " "toe aan de opdrachtregel, bijvoorbeeld \"%s \"." #: printer/printerdrake.pm:3239 printer/printerdrake.pm:3279 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Om de beschikbare opties voor de huidige printer te weten te komen, kunt u " "ofwel de lijst hieronder lezen, ofwel klikken op de knop \"Lijst van print-" "opties\".%s%s%s\n" "\n" #: printer/printerdrake.pm:3243 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Dit is een lijst van de beschikbare opties voor de huidige printer:\n" "\n" #: printer/printerdrake.pm:3248 printer/printerdrake.pm:3258 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Om een bestand vanaf de opdrachtregel (terminalvenster) af te drukken, \n" "gebruikt u de opdracht \"%s \".\n" #: printer/printerdrake.pm:3250 printer/printerdrake.pm:3260 #: printer/printerdrake.pm:3270 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Deze opdracht kunt u ook invullen in het \"Printopdracht\"-veld van " "printdialogen van veel toepassingen. Maar vul daar dan geen bestandsnaam in " "omdat het af te drukken bestand wordt geleverd door de toepassing. \n" #: printer/printerdrake.pm:3255 printer/printerdrake.pm:3265 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Om een lijst te verkrijgen van alle beschikbare opties voor de huidige " "printer, klikt u op de knop \"Lijst van print-opties\"." #: printer/printerdrake.pm:3268 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Om een bestand vanaf de opdrachtregel (terminalvenster) af te drukken, \n" "gebruikt u de opdracht \"%s \" of \"%s \".\n" #: printer/printerdrake.pm:3272 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Wanneer u KDE als werkomgeving gebruikt dan heeft u de beschikking over een " "\"paniek-knop\", een pictogram op het bureaublad, met daarop de tekst \"STOP " "Printer!\", welke onmiddelijk alle printtaken stopt wanneer u er op klikt. " "Dit is handig bijvoorbeeld in het geval van papierstoringen.\n" #: printer/printerdrake.pm:3276 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "De \"%s\"- en \"%s\"-opdrachten geven ook de mogelijkheid tot het wijzigen " "van de opties voor een specifieke afdruktaak. Voeg de gewenste instellingen " "eenvoudigweg toe aan de opdrachtregel, bijvoorbeeld \"%s \".\n" #: printer/printerdrake.pm:3286 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Bezig met afdrukken/scannen/fotokaarten op \"%s\"" #: printer/printerdrake.pm:3287 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Bezig met afdrukken/scannen op \"%s\"" #: printer/printerdrake.pm:3289 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Bezig met afdrukken/fotokaart-benadering op \"%s\"" #: printer/printerdrake.pm:3290 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Bezig met afdrukken op printer \"%s\"" #: printer/printerdrake.pm:3293 printer/printerdrake.pm:3296 #: printer/printerdrake.pm:3297 printer/printerdrake.pm:3298 #: printer/printerdrake.pm:4384 standalone/drakTermServ:324 #: standalone/drakbackup:4265 standalone/drakbug:177 standalone/drakfont:500 #: standalone/drakfont:591 standalone/net_monitor:106 #: standalone/printerdrake:508 #, c-format msgid "Close" msgstr "Sluiten" #: printer/printerdrake.pm:3296 #, c-format msgid "Print option list" msgstr "Lijst van printopties" #: printer/printerdrake.pm:3317 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Uw multifunctioneel apparaat is automatisch geconfigureerd om te kunnen " "scannen. U kunt nu scannen met \"scanimage\" (\"scanimage -d hp:%s\" om de " "scanner te specificeren als u er meer dan één heeft) vanaf de opdrachtregel " "of met behulp van de grafische interfaces \"xscanimage\" of \"xsane\". " "Indien u gebruik maakt van The GIMP, kunt u ook scannen door het juiste punt " "te kiezen in het \"Bestand\"/\"Importeren\"-menu. U kunt ook \"man scanimage" "\" aanroepen vanaf de opdrachtregel om meer informatie te krijgen.\n" "\n" "Gebruik voor dit apparaat geen \"scannerdrake\"!" #: printer/printerdrake.pm:3343 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Uw printer is automatisch geconfigureerd zodat u toegang krijgt tot de " "fotokaart-stations vanaf uw PC. Nu kunt u uw fotokaarten benaderen met de " "toepassing \"MtoolsFM\" (Menu: \"Toepassingen\" -> \"Bestandsgereedschappen" "\" -> \"MTools-bestandsbeheer\") of met de opdrachtregel-hulpprogramma's " "\"mtools\" (geef \"man mtools\" op de opdrachtregel voor meer info). U kunt " "het bestandssysteem van de kaart vinden onder stationsletter \"p:\", of " "opvolgende stationsletters indien u meer dan één HP-priner met fotokaart-" "stations heeft. In \"MtoolsFM\" kunt u schakelen tussen stationsletters met " "het veld rechtsbovenaan de bestandslijsten." #: printer/printerdrake.pm:3365 printer/printerdrake.pm:3767 #, c-format msgid "Reading printer data..." msgstr "Bezig met lezen van printer-informatie..." #: printer/printerdrake.pm:3385 printer/printerdrake.pm:3412 #: printer/printerdrake.pm:3447 #, c-format msgid "Transfer printer configuration" msgstr "Printer-configuratie overzetten" #: printer/printerdrake.pm:3386 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "U kunt de printerconfiguratie die u voor spooler %s uitgevoerd heeft, " "kopiëren naar %s, uw huidige spooler. Alle configuratiegegevens " "(printernaam, beschrijving, locatie, verbindingssoort, en standaard opties) " "worden dan overgenomen, maar printtaken zullen niet worden overgezet.\n" "Niet alle wachtrijen kunnen worden overgezet, vanwege de volgende redenen:\n" #: printer/printerdrake.pm:3389 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS ondersteunt geen printers op Novell-servers of printers die gegevens in " "een vrije vorm-opdracht versturen.\n" #: printer/printerdrake.pm:3391 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ ondersteunt alleen printers aan deze computer, LPD printers op afstand, " "en Socket/TCP printers.\n" #: printer/printerdrake.pm:3393 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD en LPRng ondersteunen geen IPP printers.\n" #: printer/printerdrake.pm:3395 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Daarbij komt dat wachtrijen die niet met dit programma of met \"foomatic-" "configure\" zijn aangemaakt, niet kunnen worden overgezet." #: printer/printerdrake.pm:3396 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Ook printers geconfigureerd met door hun fabrikant geleverde PPD-bestanden, " "of met eigen CUPS drivers, kunnen niet worden overgezet." #: printer/printerdrake.pm:3397 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Markeer de printers die u wilt overzetten en klik \n" "\"Overzetten\"." #: printer/printerdrake.pm:3400 #, c-format msgid "Do not transfer printers" msgstr "De printers niet overzetten" #: printer/printerdrake.pm:3401 printer/printerdrake.pm:3417 #, c-format msgid "Transfer" msgstr "Overzetten" #: printer/printerdrake.pm:3413 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Een printer met de naam \"%s\" bestaat al onder %s. \n" "Klik op \"Overzetten\" om deze te overschrijven.\n" "U kunt ook een nieuwe naam ingeven of deze printer overslaan." #: printer/printerdrake.pm:3434 #, c-format msgid "New printer name" msgstr "Nieuwe printernaam" #: printer/printerdrake.pm:3437 #, c-format msgid "Transferring %s..." msgstr "Bezig met overzetten van %s ..." #: printer/printerdrake.pm:3448 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "U heeft uw vorige standaardprinter (\"%s\") overgezet. Moet dit ook de " "standaardprinter worden in het nieuwe printsysteem %s?" #: printer/printerdrake.pm:3458 #, c-format msgid "Refreshing printer data..." msgstr "Bezig met verversen van printergegevens..." #: printer/printerdrake.pm:3467 #, c-format msgid "Starting network..." msgstr "Bezig met inschakelen van het netwerk..." #: printer/printerdrake.pm:3508 printer/printerdrake.pm:3512 #: printer/printerdrake.pm:3514 #, c-format msgid "Configure the network now" msgstr "Configureer het netwerk nu" #: printer/printerdrake.pm:3509 #, c-format msgid "Network functionality not configured" msgstr "Netwerk-functionaliteit niet geconfigureerd" #: printer/printerdrake.pm:3510 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "U staat op het punt een printer-op-afstand te configureren. Hiervoor is een " "werkende netwerktoegang vereist, maar uw netwerk is nog niet geconfigureerd. " "Als u verder wilt gaan zonder netwerkconfiguratie, zult u niet in staat zijn " "om de printer te gebruiken die u nu configureert. Hoe wenst u verder te gaan?" #: printer/printerdrake.pm:3513 #, c-format msgid "Go on without configuring the network" msgstr "Doorgaan zonder configureren van netwerk" #: printer/printerdrake.pm:3547 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "De netwerk-configuratie die uitgevoerd is tijdens de installatie kan op dit " "moment niet worden ingeschakeld. Gaat u na of het netwerk toegankelijk is na " "het opnieuw opstarten van uw systeem. De configuratie is te corrigeren met " "het %s Configuratiecentrum, onderdeel \"Netwerk & Internet\"/\"Verbinding\". " "Daarna kunt u de \n" "printer instellen, ook met het %s Configuratiecentrum, onderdeel \"Apparatuur" "\"/\"Printer\"" #: printer/printerdrake.pm:3548 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "De netwerktoegang was nog niet actief en kon ook niet worden ingeschakeld. " "Gelieve uw configuratie en uw hardware na te kijken. Probeert u daarna " "opnieuw uw printer-op-afstand te configureren." #: printer/printerdrake.pm:3558 #, c-format msgid "Restarting printing system..." msgstr "Bezig met herstarten van het printsysteem..." #: printer/printerdrake.pm:3597 #, c-format msgid "high" msgstr "hoog" #: printer/printerdrake.pm:3597 #, c-format msgid "paranoid" msgstr "paranoïde" #: printer/printerdrake.pm:3598 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" "Bezig met installeren van een printsysteem in het %s beveiligingsniveau" #: printer/printerdrake.pm:3599 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "U staat op het punt om printsysteem %s te installeren op een systeem dat op " "beveiligingsniveau %s draait.\n" "\n" "Dit printsysteem draait een daemon (achtergrondproces) welke wacht op een " "taak en deze afhandelt. Deze daemon is ook toegankelijk voor computers op " "afstand over het netwerk en dus is het een mogelijk doelwit voor aanvallen. " "Daarom worden er normaal gesproken slechts enkele geselecteerde daemons " "gestart op dit beveiligingsniveau.\n" "\n" "Weet u zeker dat u het afdrukken wilt configureren op deze computer?" #: printer/printerdrake.pm:3633 #, c-format msgid "Starting the printing system at boot time" msgstr "Het printsysteem zal bij het opstarten worden ingeschakeld" #: printer/printerdrake.pm:3634 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Het printsysteem (%s) zal niet automatisch worden ingeschakeld wanneer de " "computer wordt opgestart.\n" "\n" "Mogelijkerwijs is het automatisch inschakelen uitgezet door het omschakelen " "naar een hoger beveiligingsniveau, omdat het printsysteem een mogelijk " "doelwit is voor aanvallen.\n" "\n" "Wilt u dat het automatisch inschakelen van het printsysteem weer wordt " "aangezet?" #: printer/printerdrake.pm:3655 printer/printerdrake.pm:3889 #, c-format msgid "Checking installed software..." msgstr "Bezig met nagaan welke software geïnstalleerd is..." #: printer/printerdrake.pm:3661 #, c-format msgid "Removing %s ..." msgstr "Bezig met verwijderen van %s..." #: printer/printerdrake.pm:3665 #, c-format msgid "Could not remove the %s printing system!" msgstr "Kan het %s-printsysteem nieet verwijderen!" #: printer/printerdrake.pm:3674 #, c-format msgid "Installing %s ..." msgstr "Installeren van %s..." #: printer/printerdrake.pm:3678 #, c-format msgid "Could not install the %s printing system!" msgstr "Kan het %s-printsysteem niet installeren!" #: printer/printerdrake.pm:3727 #, c-format msgid "Setting Default Printer..." msgstr "Instellen standaard printer..." #: printer/printerdrake.pm:3747 #, c-format msgid "Select Printer Spooler" msgstr "Selecteer printer-spooler" #: printer/printerdrake.pm:3748 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Welk printsysteem (\"spooler\") wilt u gebruiken?" #: printer/printerdrake.pm:3799 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Configureren van printer \"%s\" mislukt!" #: printer/printerdrake.pm:3812 #, c-format msgid "Installing Foomatic..." msgstr "Bezig met installeren van Foomatic..." #: printer/printerdrake.pm:3818 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "Kan %s pakketten niet installeren, kan %s niet starten!" #: printer/printerdrake.pm:3910 #, c-format msgid "Could not install necessary packages, %s cannot be started!" msgstr "" "Kan de benodigde pakketten niet installeren, %s kan niet gestart worden!" #: printer/printerdrake.pm:4011 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "De volgende printers zijn geconfigureerd. Dubbelklik op één ervan om zijn " "instellingen te wijzigen; hem als standaardprinter in te stellen; of om " "informatie erover te bekijken." #: printer/printerdrake.pm:4039 #, c-format msgid "Display all available remote CUPS printers" msgstr "Alle beschikbare CUPS printers-op-afstand weergeven" #: printer/printerdrake.pm:4040 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Printerlijst verversen (om alle CUPS printers-op-afstand zichtbaar te maken)" #: printer/printerdrake.pm:4050 #, c-format msgid "CUPS configuration" msgstr "CUPS configuratie" #: printer/printerdrake.pm:4062 #, c-format msgid "Change the printing system" msgstr "Wijzig het printsysteem" #: printer/printerdrake.pm:4071 #, c-format msgid "Normal Mode" msgstr "Normale modus" #: printer/printerdrake.pm:4072 #, c-format msgid "Expert Mode" msgstr "Expert-modus" #: printer/printerdrake.pm:4343 printer/printerdrake.pm:4398 #: printer/printerdrake.pm:4479 printer/printerdrake.pm:4489 #, c-format msgid "Printer options" msgstr "Printer-opties" #: printer/printerdrake.pm:4379 #, c-format msgid "Modify printer configuration" msgstr "Printerconfiguratie aanpassen" #: printer/printerdrake.pm:4381 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Printer %s\n" "Wat wilt u aanpassen aan deze printer?" #: printer/printerdrake.pm:4385 #, c-format msgid "Do it!" msgstr "Doe het!" #: printer/printerdrake.pm:4390 printer/printerdrake.pm:4448 #, c-format msgid "Printer connection type" msgstr "Soort printerverbinding" #: printer/printerdrake.pm:4391 printer/printerdrake.pm:4452 #, c-format msgid "Printer name, description, location" msgstr "Printernaam, beschrijving, locatie" #: printer/printerdrake.pm:4393 printer/printerdrake.pm:4471 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Printerfabrikant, model, aansturingsprogramma" #: printer/printerdrake.pm:4394 printer/printerdrake.pm:4472 #, c-format msgid "Printer manufacturer, model" msgstr "Printerfabrikant, model" #: printer/printerdrake.pm:4400 printer/printerdrake.pm:4483 #, c-format msgid "Set this printer as the default" msgstr "Stel deze printer in als standaardprinter" #: printer/printerdrake.pm:4402 printer/printerdrake.pm:4490 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Deze printer aan Star Office/OpenOffice.org/GIMP toevoegen" #: printer/printerdrake.pm:4403 printer/printerdrake.pm:4495 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Deze printer verwijderen uit Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4404 printer/printerdrake.pm:4500 #, c-format msgid "Print test pages" msgstr "Testpagina('s) afdrukken" #: printer/printerdrake.pm:4405 printer/printerdrake.pm:4502 #, c-format msgid "Learn how to use this printer" msgstr "Leer hoe u deze printer kunt bedienen" #: printer/printerdrake.pm:4406 printer/printerdrake.pm:4504 #, c-format msgid "Remove printer" msgstr "Printer verwijderen" #: printer/printerdrake.pm:4460 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Bezig met verwijderen van oude printer \"%s\" ..." #: printer/printerdrake.pm:4491 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Bezig met toevoegen van printer aan Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4493 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "De printer \"%s\" is succesvol aan Star Office/OpenOffice.org/GIMP " "toegevoegd." #: printer/printerdrake.pm:4494 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "Het toevoegen van de printer \"%s\" aan Star Office/OpenOffice.org/GIMP is " "mislukt." #: printer/printerdrake.pm:4496 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "Bezig met verwijderen van printer uit Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4498 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" "De printer \"%s\" is succesvol uit Star Office/OpenOffice.org/GIMP " "verwijderd." #: printer/printerdrake.pm:4499 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "Het verwijderen van de printer \"%s\" uit Star Office/OpenOffice.org/GIMP is " "mislukt." #: printer/printerdrake.pm:4543 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Weet u zeker dat u de printer \"%s\" wilt verwijderen?" #: printer/printerdrake.pm:4547 #, c-format msgid "Removing printer \"%s\"..." msgstr "Bezig met verwijderen van printer \"%s\" ..." #: printer/printerdrake.pm:4571 #, c-format msgid "Default printer" msgstr "Standaard printer" #: printer/printerdrake.pm:4572 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "De \"%s\"-printer is nu ingesteld als de standaardprinter." #: raid.pm:37 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Kan geen partitie toevoegen aan een _geformatteerde_ RAID md%d" #: raid.pm:139 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid-fout! (misschien ontbreken de raidtools?)" #: raid.pm:139 #, c-format msgid "mkraid failed" msgstr "mkraid-fout!" #: raid.pm:155 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Niet genoeg partities voor RAID-niveau %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "Kan map /usr/share/sane/firmware niet aanmaken!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "Kan verwijzing /usr/share/sane/%s niet aanmaken!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "Kan firmwarebestand %s niet kopiëren naar /usr/share/sane/firmware!" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "Kan de rechten van firmwarebestand %s niet instellen!" #: scanner.pm:200 standalone/scannerdrake:65 standalone/scannerdrake:69 #: standalone/scannerdrake:77 standalone/scannerdrake:339 #: standalone/scannerdrake:414 standalone/scannerdrake:458 #: standalone/scannerdrake:462 standalone/scannerdrake:484 #: standalone/scannerdrake:549 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:915 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "Kan de benodigde pakketten om scanner(s) te delen niet installeren." #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" "Uw scanner(s) zullen niet beschikbaar zijn voor gebruikers die geen root " "zijn." #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "IPv4-onzinfoutmeldingen accepteren/weigeren." #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr " Uitgezonden icmp-echo accepteren/weigeren." #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr " icmp-echo accepteren/weigeren." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Automatisch aanmelden toestaan/verbieden." #: security/help.pm:19 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Als ingesteld op = \"ALL\", het bestaan van /etc/issue en /etc/issue.net\n" "toestaan. Als ingesteld op \"NONE\" dan zijn geen 'issues' toegestaan.\n" "\n" "Anders is alleen /etc/issue toegestaan." #: security/help.pm:25 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Herstarten door de console-gebruiker toestaan/verbieden" #: security/help.pm:27 #, c-format msgid "Allow/Forbid remote root login." msgstr "Op afstand aanmelden van root toestaan/verbieden." #: security/help.pm:29 #, c-format msgid "Allow/Forbid direct root login." msgstr "Directe aanmelding van root toestaan/verbieden." #: security/help.pm:31 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "De systeemgebruikerslijst toestaan/verbieden op displaybeheer (kdm en gdm)." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "X-verbindingen toestaan/verbieden:\n" "\n" "- ALL (alle verbindingen toegestaan),\n" "\n" "- LOCAL (alleen lokale verbinding),\n" "\n" "- NONE (geen.verbinding)." #: security/help.pm:41 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Het argument geeft aan of het clients is toegestaan te verbinden\n" "vanaf het netwerk met de X-server op de tcp-poort 6000 of niet." #: security/help.pm:44 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Goedkeuren:\n" "\n" "- Alle diensten gecontroleerd door tcp_wrappers (zie de man-pagina\n" "van hosts.deny(5)) als ingesteld op \"ALL\",\n" "\n" "- alleen lokale diensten als ingesteld op \"LOCAL\"\n" "\n" "- geen als ingesteld op \"NONE\".\n" "\n" "Om de diensten die u nodig heeft goed te keuren, gebruikt u\n" "/etc/hosts.allow (zie de man-pagina van hosts.allow(5))." #: security/help.pm:54 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Maakt de symbolische verwijzing /etc/security/msec/server naar\n" "/etc/security/msec/server., alsSERVER_LEVEL (of SECURE_LEVEL " "indien afwezig) groter is dan 3\n" "in /etc/security/msec/security.conf\n" "/etc/security/msec/server wordt door chkconfig --add gebruikt om te bepalen\n" "of een dienst wordt toegevoegd als het aanwezig is in het bestand gedurende\n" "de installatie van pakketten." #: security/help.pm:63 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "crontab en at in-/uitschakelen voor gebruikers.\n" "\n" "Zet toegestane gebruikers in /etc/cron.allow en /etc/at.allow\n" "(zie man at(1) en crontab(1))." #: security/help.pm:68 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Systeemlogboekrapportage naar console 12 in-/uitschakelen" #: security/help.pm:70 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" "Bescherming tegen naamopzoek-misleiding in-/uitschakelenAls \"alert\" waar " "is, ook naar syslogboek rapporteren." #: security/help.pm:73 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Bescherming tegen nep-IP's in-/uitschakelen." #: security/help.pm:75 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "libsafe in-/uitschakelen als libsafe op het systeem is gevonden." #: security/help.pm:77 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "In logboek bijhouden van vreemde IPv4-pakketten." #: security/help.pm:79 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Om het uur-msec beveilingscontrole in-/uitschakelen." #: security/help.pm:81 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" "su slechts inschakelen voor leden van de wheel-groep of toestaan voor elke\n" "gebruiker." #: security/help.pm:83 #, c-format msgid "Use password to authenticate users." msgstr "Wachtwoord gebruiken voor gebruikers-aanmeldingscontrole." #: security/help.pm:85 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "Controle op ethernetkaart-afluistermodus in-/uitschakelen." #: security/help.pm:87 #, c-format msgid " Activate/Disable daily security check." msgstr " Dagelijkse beveiligingscontrole (de-)activeren." #: security/help.pm:89 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr " sulogin(8) in-/uitschakelen op \"single user\"-niveau." #: security/help.pm:91 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" "Naam toevoegen als uitzondering op afhandeling wachtwoordveroudering van " "msec." #: security/help.pm:93 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Wachtwoordveroudering instellen op \"max\" dagen en tijd tot wijziging op\n" "\"inactive\"." #: security/help.pm:95 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "De lengte van de wachtwoordgeschiedenis instellen om wachtwoord-hergebruik\n" "te voorkomen." #: security/help.pm:97 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Instellen van minimumlengte van het wachtwoord en minimum aantal cijfers en " "hoofdletters." #: security/help.pm:99 #, c-format msgid "Set the root umask." msgstr "Het root-umask instellen." #: security/help.pm:100 #, c-format msgid "if set to yes, check open ports." msgstr "als ingesteld op ja, nagaan van open poorten. " #: security/help.pm:101 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "als ingesteld op ja, controleren op: \n" "\n" "- lege wachtwoorden,\n" "\n" "- geen wachtwoord in /etc/shadow\n" "\n" "- gebruikers met id 0 bezijden root." #: security/help.pm:108 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "als ingesteld op ja, permissies controleren van bestanden in persoonlijke " "map van gebruiker." #: security/help.pm:109 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "als ingesteld op ja, nagaan of netwerkapparaten in afluistermodus staan." #: security/help.pm:110 #, c-format msgid "if set to yes, run the daily security checks." msgstr "als ingesteld op ja, dagelijkse beveiligingscontroles uitvoeren." #: security/help.pm:111 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "als ingesteld op ja, nagaan van toegevoegde/verwijderde sgid-bestanden" #: security/help.pm:112 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "als ingesteld op ja, controleren op leeg wachtwoord in /etc/shadow." #: security/help.pm:113 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "als ingesteld op ja, controlesom verifiëren van suid/guid-bestanden." #: security/help.pm:114 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "als ingesteld op ja, toevoegingen/verdwijningen controleren van suid root-" "bestanden." #: security/help.pm:115 #, c-format msgid "if set to yes, report unowned files." msgstr "als ingesteld op ja, bestanden zonder eigenaar rapporteren." #: security/help.pm:116 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "als ingesteld op ja, controleren op voor iedereen schrijfbare bestanden/" "mappen" #: security/help.pm:117 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "als ingesteld op ja, chkrootkit-controles uitvoeren." #: security/help.pm:118 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "als ingesteld, de e-mailrapportage naar dit adres sturen, anders naar root." #: security/help.pm:119 #, c-format msgid "if set to yes, report check result by mail." msgstr "als op ja ingesteld, controleresultaat rapporteren over e-mail." #: security/help.pm:120 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "Geen e-mail versturen als er niets te waarschuwen valt" #: security/help.pm:121 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "als ingesteld op ja, enkele controles op de rpm-database uitvoeren." #: security/help.pm:122 #, c-format msgid "if set to yes, report check result to syslog." msgstr "als ingesteld op ja, controleresultaat rapporteren naar syslogboek." #: security/help.pm:123 #, c-format msgid "if set to yes, reports check result to tty." msgstr "als ingesteld op ja, dan gaan de rapportages naar tty." #: security/help.pm:125 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Grootte van opdrachtgeheugen van shell instellen. Een waarde van -1\n" "betekent ongelimiteerd." #: security/help.pm:127 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" "De shell-wachttijd instellen. Een waarde van nul betekent geen wachttijd." #: security/help.pm:127 #, c-format msgid "Timeout unit is second" msgstr "Timeout-eenheid is seconde" #: security/help.pm:129 #, c-format msgid "Set the user umask." msgstr "Het gebruikers-umask instellen." #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "IPv4-onzinfoutmeldingen accepteren" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Uitgezonden icmp-echo accepteren" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "icmp-echo accepteren" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* bestaat" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "Herstarten door de console-gebruiker" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Op afstand aanmelden van root toestaan" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "Direct aanmelden als root" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "Gebruikers opsommen op displaybeheer (kdm en gdm)." #: security/l10n.pm:20 #, c-format msgid "Allow X Window connections" msgstr "X Window-verbindingen toestaan" #: security/l10n.pm:21 #, c-format msgid "Authorize TCP connections to X Window" msgstr "TCP-verbindingen naar X goedkeuren" #: security/l10n.pm:22 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Alle diensten onder controle van tcp_wrappers goedkeuren" #: security/l10n.pm:23 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig gehoorzaamt aan msec-regels" #: security/l10n.pm:24 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "\"crontab\" en \"at\" voor gebruikers inschakelen" #: security/l10n.pm:25 #, c-format msgid "Syslog reports to console 12" msgstr "Systeemlogboekrapportage naar console 12" #: security/l10n.pm:26 #, c-format msgid "Name resolution spoofing protection" msgstr "Bescherming tegen nep-name resolution" #: security/l10n.pm:27 #, c-format msgid "Enable IP spoofing protection" msgstr "Bescherming tegen nep-IP's" #: security/l10n.pm:28 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "libsafe inschakelen als libsafe op het systeem is gevonden." #: security/l10n.pm:29 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "In logboek bijhouden van vreemde IPv4-pakketten" #: security/l10n.pm:30 #, c-format msgid "Enable msec hourly security check" msgstr "Om het uur-msec beveilingscontrole in-/uitschakelen" #: security/l10n.pm:31 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" "su slechts inschakelen voor leden van de wheel-groep of voor elke gebruiker." #: security/l10n.pm:32 #, c-format msgid "Use password to authenticate users" msgstr "Wachtwoord gebruiken voor aanmeldingscontrole." #: security/l10n.pm:33 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Controle op ethernetkaart-afluistermodus" #: security/l10n.pm:34 #, c-format msgid "Daily security check" msgstr "Dagelijkse beveiligingscontrole" #: security/l10n.pm:35 #, c-format msgid "Sulogin(8) in single user level" msgstr "sulogin(8) in-/uitschakelen op \"single user\"-niveau." #: security/l10n.pm:36 #, c-format msgid "No password aging for" msgstr "Geen wachtwoordverloop voor" #: security/l10n.pm:37 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Wachtwoordverloop en account-deactivatieperiodes" #: security/l10n.pm:38 #, c-format msgid "Password history length" msgstr "Lengte van wachtwoordgeschiedenis" #: security/l10n.pm:39 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Minimumlengte van wachtwoord en aantal cijfers en hoofdletters" #: security/l10n.pm:40 #, c-format msgid "Root umask" msgstr "Root-umask" #: security/l10n.pm:41 #, c-format msgid "Shell history size" msgstr "Grootte van shell-geschiedenis" #: security/l10n.pm:42 #, c-format msgid "Shell timeout" msgstr "Shell-wachttijd" #: security/l10n.pm:43 #, c-format msgid "User umask" msgstr "Gebruiker-umask" #: security/l10n.pm:44 #, c-format msgid "Check open ports" msgstr "Open poorten controleren" #: security/l10n.pm:45 #, c-format msgid "Check for unsecured accounts" msgstr "Controleren op onbeveiligde accounts" #: security/l10n.pm:46 #, c-format msgid "Check permissions of files in the users' home" msgstr "" "Permissies controleren van bestanden in persoonlijke map van gebruiker." #: security/l10n.pm:47 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Nagaan of netwerkapparaten in afluistermodus staan" #: security/l10n.pm:48 #, c-format msgid "Run the daily security checks" msgstr "Dagelijkse beveiligingscontroles uitvoeren." #: security/l10n.pm:49 #, c-format msgid "Check additions/removals of sgid files" msgstr "Nagaan van toegevoegde/verwijderde sgid-bestanden" #: security/l10n.pm:50 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Controleren op leeg wachtwoord in /etc/shadow" #: security/l10n.pm:51 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Controlesom verifiëren van suid/guid-bestanden." #: security/l10n.pm:52 #, c-format msgid "Check additions/removals of suid root files" msgstr "Toevoegingen/verdwijningen controleren van suid root-bestanden." #: security/l10n.pm:53 #, c-format msgid "Report unowned files" msgstr "Bestanden zonder eigenaar rapporteren" #: security/l10n.pm:54 #, c-format msgid "Check files/directories writable by everybody" msgstr "Controleren op voor iedereen schrijfbare bestanden/mappen" #: security/l10n.pm:55 #, c-format msgid "Run chkrootkit checks" msgstr "chkrootkit-controles uitvoeren" #: security/l10n.pm:56 #, c-format msgid "Do not send mails when unneeded" msgstr "Geen onnodige e-mails versturen" #: security/l10n.pm:57 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Als ingesteld, de e-mailrapportage naar dit e-mailadres sturen, anders naar " "root." #: security/l10n.pm:58 #, c-format msgid "Report check result by mail" msgstr "Controleresultaat rapporteren over e-mail." #: security/l10n.pm:59 #, c-format msgid "Run some checks against the rpm database" msgstr "Enkele controles op de rpm-database uitvoeren." #: security/l10n.pm:60 #, c-format msgid "Report check result to syslog" msgstr "Controleresultaat rapporteren naar syslogboek" #: security/l10n.pm:61 #, c-format msgid "Reports check result to tty" msgstr "Controlerapportages naar tty sturen" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Krakers zijn welkom" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Matig" #: security/level.pm:13 #, c-format msgid "High" msgstr "Hoog" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Hoger" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Paranoïde" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Dit niveau moet met voorzichtigheid gebruikt worden. Het maakt uw systeem\n" "makkelijker te gebruiken maar erg gevoelig: het moet niet gebruikt worden " "indien de\n" "machine met andere computers of het internet verbonden is. Er worden\n" "geen wachtwoorden gebruikt." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Wachtwoorden zijn nu ingeschakeld, maar het gebruik als genetwerkte computer " "is nog steeds niet aanbevolen." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Dit is de standaardbeveiliging, aangeraden voor een computer die als cliënt " "met het Internet verbonden zal worden." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Er zijn al enkele restricties en meer automatische nachtelijke controles." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Met dit veiligheidsniveau wordt het mogelijk dit systeem als server te " "gebruiken.\n" "De beveiliging is nu goed genoeg om de computer als server te gebruiken die\n" "verbindingen van vele clients accepteert. Merk op: als uw computer alleen " "een\n" "client op het Internet is, dan kunt u beter een lager niveau kiezen." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Gebaseerd op het lagere niveau, maar nu is het systeem volledig afgesloten.\n" "Beveiligingsfuncties staan op hun maximumwaarde." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec basisopties" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Kies het gewenste veiligheidsniveau" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Veiligheidsniveau" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Gebruik libsafe voor servers" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Een bibliotheek welke bescherming biedt tegen \"buffer-overflow\"- en " "\"format string\"-aanvallen." #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "Beveiligings-beheerder (gebruikersnaam of e-mail)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Start het ALSA (Advanced Linux Sound Architecture) geluidssysteem" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron, een periodieke opdracht-planner." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd wordt gebruikt voor het controleren van de batterijstatus en om dit te " "bij te houden via het systeemlogboek.\n" "Het kan ook gebruikt worden om de machine uit te schakelen als het\n" "spanningsniveau van de batterij laag is." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Voert opdrachten uit die door het at-programma gepland zijn op het moment " "dat\n" "werd opgegeven toen at werd aangeroepen, en draait batch-opdrachten's " "wanneer\n" "het belastingsgemiddelde laag genoeg is." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron is een standaard UNIX-programma dat door de gebruiker gespecificeerde " "programma's start\n" "op periodiek geplande tijden. vixie cron voegt een aantal extra's toe aan de " "basis UNIX-cron,\n" "waaronder betere veiligheid en krachtiger in te stellen opties." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "FAM is een voorziening die bestanden observeert. Het is bruikbaar om\n" "meldingen te krijgen wanneer bestanden veranderen.\n" "Het wordt door GNOME en KDE gebruikt" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM voegt muisondersteuning toe aan text-based Linux-toepassingen zoals de\n" "Midnight Commander. Het laat ook mouse-based console knippen-en-plakken " "toe,\n" "en biedt ook ondersteuning voor pop-up menu's op de console." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake draait als een hardware-sonde, en eventueel \n" "configureert het nieuwe of veranderde hardware." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache is een World Wide Web-server. Het wordt gebruikt om HTML-bestanden en " "CGI aan te bieden." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "De internet superserver daemon (meestal inetd genoemd) start een hele\n" "hoop andere internetdiensten wanneer nodig. Het is verantwoordelijk voor\n" "vele diensten, waaronder telnet, ftp, rsh en rlogin. Als u inetd " "uitschakelt,\n" "schakelt u alle diensten uit waar de daemon verantwoordelijk voor is." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Pakket-filtering inschakelen voor Linux kernel 2.2-serie, om \n" "een firewall op te zetten die uw machine beschermt tegen \n" "aanvallen vanuit het netwerk." #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Dit pakket laadt de geselecteerde toetsenbord-indeling als ingesteld in\n" "/etc/sysconfig/keyboard. Dit kan geselecteerd worden via de kbdconfig " "utility.\n" "U kunt dit het best aan laten voor de meeste machines." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Automatisch opnieuw aanmaken van kernel header in \n" "/boot voor /usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Automatisch vinden en instellen van hardware bij het opstarten" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf zal op sommige momenten regelen dat diverse \n" "taken worden uitgevoerd bij het opstarten, om de systeem-\n" "configuratie te behouden." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd is de afdrukvoorziening, die nodig is om de lpr-opdracht goed te laten\n" "werken. Het is een server die afdruktaken naar printers stuurt en regelt." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, gebruikt om een hoge-prestatie en hoge-\n" "beschikbaarheid server te bouwen." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) is een Domain Name Server (DNS) die wordt gebruikt om " "computernamen naar IP-adressen om te zetten." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "(Ont)koppelt alle Network File System (NFS), SMB (Lan Manager/Windows)\n" "en NCP (NetWare) koppelpunten." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Activeert/Deactiveert alle netwerk-interfaces die geconfigureerd zijn\n" "om bij het opstarten ingeschakeld te worden." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n" "Deze dienst geeft u NFS-serverfunctionaliteit, die dan wordt geregeld via " "het\n" "bestand /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n" "Deze dienst geeft u NFS-bestands'locking'-functionaliteit." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Automatisch aanzetten van de numlock-toets onder \n" "terminalvensters en XFree bij het opstarten." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Ondersteun de OKI 4w en compatibele winprinters" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA-ondersteuning dient meestal om ethernet en modems in laptops te " "onder-\n" "steunen. Het zal niet gestart worden tenzij het geconfigureerd is, dus het " "is\n" "veilig om het geïnstalleerd te hebben op machines die het niet nodig hebben." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "De portmapper beheert RPC-verbindingen, die gebruikt worden door protocols\n" "zoals NFS en NIS. De portmap-server moet draaien op machines die fungeren\n" "als servers voor protocols die het RPC-mechanisme gebruiken." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix is een Mail Transport Agent, een programma dat post verplaatst van " "de ene machine naar de andere." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Bewaart en herstelt de systeem-entropie pool voor betere generatie\n" "van willekeurige cijfers." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Blok-georiënteerde apparaten (zoals partities op een harde schijf)\n" "direct aanspreken voor het gebruik van toepassingen als Oracle of DVD-spelers" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "De routed daemon laat automatische IP-router-tabel updates toe via het RIP-\n" "protocol. RIP is vooral gebruikt op kleine netwerken, complexere routing-\n" "protocols zijn nodig voor complexere netwerken." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Het rstat-protocol laat gebruikers op een netwerk de prestatie-cijfers\n" "voor elke machine op dat netwerk op te vragen." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Het rusers-protocol laat gebruikers op een netwerk toe om de kijken wie er\n" "ingelogd is op de andere machines op dat netwerk." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Het rwho-protocol laat gebruikers op afstand een lijst opvragen van alle\n" "gebruikers die op een machine ingelogd zijn die de rwho daemon draait.\n" "(vergelijkbaar met finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Schakel het geluidssysteem van uw machine in" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog is de manier die vele daemons gebruiken om boodschappen te loggen " "naar\n" "verscheidene systeem-logbestanden. Het is een goed idee syslog altijd te " "draaien." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Laad de stuurprogramma's voor uw USB-apparaten" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Start de X Font Server (deze is noodzakelijk voor het draaien\n" "van XFree)." #: services.pm:117 services.pm:159 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" "Selecteer welke diensten automatisch gestart moeten worden bij het opstarten" #: services.pm:129 #, c-format msgid "Printing" msgstr "Afdrukken" #: services.pm:130 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:133 #, c-format msgid "File sharing" msgstr "Bestanden delen" #: services.pm:140 #, c-format msgid "Remote Administration" msgstr "Beheer op afstand" #: services.pm:148 #, c-format msgid "Database Server" msgstr "Database-server" #: services.pm:211 #, c-format msgid "running" msgstr "actief" #: services.pm:211 #, c-format msgid "stopped" msgstr "gestopt" #: services.pm:215 #, c-format msgid "Services and deamons" msgstr "Diensten en voorzieningen" #: services.pm:221 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Geen extra informatie over\n" "deze dienst beschikbaar, sorry." #: services.pm:226 ugtk2.pm:1167 #, c-format msgid "Info" msgstr "Info" #: services.pm:229 #, c-format msgid "Start when requested" msgstr "Starten op aanvraag" #: services.pm:229 #, c-format msgid "On boot" msgstr "Bij opstarten" #: services.pm:244 #, c-format msgid "Start" msgstr "Start" #: services.pm:244 #, c-format msgid "Stop" msgstr "Stop" #: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13 #: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13 #, c-format msgid "Congratulations for choosing Mandrakelinux!" msgstr "Gefeliciteerd met het kiezen van Mandrakelinux!" #: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15 #: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15 #, c-format msgid "Welcome to the Open Source world!" msgstr "Welkom in de Open Source-wereld!" #: share/advertising/dis-01.pl:17 #, c-format msgid "" "Your new Mandrakelinux operating system and its many applications is the " "result of collaborative efforts between MandrakeSoft developers and " "Mandrakelinux contributors throughout the world." msgstr "" "Uw nieuwe Mandrakelinux besturingssysteem en haar vele toepassingen zijn het " "resultaat van samenwerking en inspanningen van MandrakeSoft-ontwikkelaars en " "personen vanuit de hele wereld die hebben bijgedragen." #: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19 #: share/advertising/ppp-01.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development of this " "latest release." msgstr "" "We willen iedereen graag bedanken die deel heeft genomen aan de ontwikkeling " "van deze nieuwe uitgave." #: share/advertising/dis-02.pl:13 #, c-format msgid "Discovery" msgstr "Discovery" #: share/advertising/dis-02.pl:15 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux distribution. It " "includes a hand-picked selection of premium software for Office, Multimedia " "and Internet activities." msgstr "" "Discovery is de makkelijkste en gebruikersvriendelijkste Linuxdistributie. " "Het bevat een zorgvuldig uitgekozen softwareselectie voor kantoor, " "multimedia en internetactiviteiten." #: share/advertising/dis-02.pl:17 #, c-format msgid "The menu is task-oriented, with a single selected application per task." msgstr "" "Het menu is taak-geörienteerd, met een enkele uitgekozen toepassing per taak." #: share/advertising/dis-03.pl:13 #, c-format msgid "The KDE Choice" msgstr "De KDE-keuze" #: share/advertising/dis-03.pl:15 #, c-format msgid "" "The powerful Open Source graphical desktop environment KDE is the desktop of " "choice for the Discovery Pack." msgstr "" "De krachtige Open Source grafische werkomgeving KDE is de uitverkoren " "werkomgeving voor het Discovery Pack." #: share/advertising/dis-04.pl:13 #, c-format msgid "OpenOffice.org: The complete Linux office suite." msgstr "OpenOffice.org: Het complete Linux-kantoorpakket." #: share/advertising/dis-04.pl:15 #, c-format msgid "" "WRITER is a powerful word processor for creating all types of text " "documents. Documents may include images, diagrams and tables." msgstr "" "WRITER is een krachtige tekstverwerker voor het aanmaken van alle " "soorten tekstdocumenten. Documenten kunnen afbeeldingen, diagrammen en " "tabellen bevatten." #: share/advertising/dis-04.pl:16 #, c-format msgid "" "CALC is a feature-packed spreadsheet which enables you to compute, " "analyze and manage all of your data." msgstr "" "CALC is een rekenblad dat bol staat van de mogelijkheden en u in " "staat stelt te rekenen, te analyseren en al uw gegevens te beheren." #: share/advertising/dis-04.pl:17 #, c-format msgid "" "IMPRESS is the fastest, most powerful way to create effective " "multimedia presentations." msgstr "" "IMPRESS is de snelste en krachtigste manier om effectieve multimedia-" "presentaties te maken." #: share/advertising/dis-04.pl:18 #, c-format msgid "" "DRAW will produce everything from simple diagrams to dynamic 3D " "illustrations." msgstr "" "DRAW produceert alles van eenvoudige diagrammen tot dynamische 3D-" "illustraties." #: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13 #, c-format msgid "Surf The Internet" msgstr "Surfen over Internet" #: share/advertising/dis-05.pl:15 #, c-format msgid "Discover the new integrated personal information suite KDE Kontact." msgstr "Ontdek het nieuwe geïntegreerde persoonlijke gegevensbeheer Kontact." #: share/advertising/dis-05.pl:17 #, c-format msgid "" "More than just a full-featured email client, Kontact also includes an " "address book, a calendar and scheduling program, plus a tool for taking " "notes!" msgstr "" "Kontact is meer dan alleen een compleet e-mailprogramma, het bevat " "tevens een adresboek, kalender en een inroosterprogramma, plus een hulpje om " "notities mee te maken!" #: share/advertising/dis-06.pl:15 #, c-format msgid "You can also:" msgstr "U kunt ook:" #: share/advertising/dis-06.pl:16 #, c-format msgid "\t- browse the Web" msgstr "\t- het Web bekijken" #: share/advertising/dis-06.pl:17 #, c-format msgid "\t- chat" msgstr "\t- chatten" #: share/advertising/dis-06.pl:18 #, c-format msgid "\t- organize a video-conference" msgstr "\t- een videoconferentie organiseren" #: share/advertising/dis-06.pl:19 #, c-format msgid "\t- create your own Web site" msgstr "\t- uw eigen webpagina maken" #: share/advertising/dis-06.pl:20 #, c-format msgid "\t- ..." msgstr "\t- ..." #: share/advertising/dis-07.pl:13 #, c-format msgid "Multimedia: Software for every need!" msgstr "Multimedia: Voor elk wat wils!" #: share/advertising/dis-07.pl:15 #, c-format msgid "Listen to audio CDs with KsCD." msgstr "Luister naar audio-CD's met KsCD." #: share/advertising/dis-07.pl:17 #, c-format msgid "Listen to music files and watch videos with Totem." msgstr "Luister naar muziekbestanden en bekijk video's met Totem" #: share/advertising/dis-07.pl:19 #, c-format msgid "View and edit images and photos with GQview and The Gimp!" msgstr "" "Bekijk en bewerk afbeeldingen en foto's met GQview en The Gimp!" #: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13 #: share/advertising/pwp-07.pl:13 #, c-format msgid "Mandrake Control Center" msgstr "Mandrake Configuratiecentrum" #: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15 #: share/advertising/pwp-07.pl:15 #, c-format msgid "" "The Mandrake Control Center is an essential collection of Mandrake-specific " "utilities for simplifying the configuration of your computer." msgstr "" "Het Mandrake Configuratiecentrum is een essentiële verzameling Mandrake-" "specifieke hulpprogramma's die het configureren van uw computer " "vereenvoudigen." #: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17 #: share/advertising/pwp-07.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of handy utilities for " "easily configuring hardware devices, defining mount points, setting up " "Network and Internet, adjusting the security level of your computer, and " "just about everything related to the system." msgstr "" "U zult deze verzameling handige hulpprogramma's om apparaten makkelijk te " "configureren, koppelpunten te definiëren, netwerk en internet in te stellen, " "het beveiligingsniveau van uw computer aan te passen, en alles wat verder " "met uw systeem te maken heeft, onmiddelijk waarderen." #: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13 #: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13 #, c-format msgid "MandrakeStore" msgstr "MandrakeStore" #: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15 #: share/advertising/pwp-08.pl:15 #, c-format msgid "" "Find all MandrakeSoft products and services at MandrakeStore -- our " "full service e-commerce platform." msgstr "" "U kunt alle MandrakeSoft-produkten en diensten vinden op MandrakeStore -- ons uitgebreide service e-commerce-platform." #: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19 #: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17 #, c-format msgid "Stop by today at www.mandrakestore.com" msgstr "Kom vandaag nog langs op www.mandrakestore.com" #: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13 #: share/advertising/pwp-09.pl:13 #, c-format msgid "Become a MandrakeClub member!" msgstr "Wordt lid van MandrakeClub!" #: share/advertising/dis-10.pl:15 share/advertising/ppp-10.pl:15 #: share/advertising/pwp-09.pl:15 #, c-format msgid "" "Take advantage of valuable benefits, products and services by joining " "MandrakeClub, such as:" msgstr "" "Profiteer van waardevolle voordelen, produkten en diensten door u aan te " "sluiten bij MandrakeClub, zoals:" #: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16 #: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16 #, c-format msgid "\t- Full access to commercial applications" msgstr "\t- Volledige toegang tot commerciële toepassingen" #: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17 #: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17 #, c-format msgid "\t- Special download mirror list exclusively for MandrakeClub Members" msgstr "\t- Speciale downloadmirror-lijst exclusief voor MandrakeClub-leden" #: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18 #: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18 #, c-format msgid "\t- Voting for software to put in Mandrakelinux" msgstr "\t- Stemmen voor software om bij Mandrakelinux te bundelen" #: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19 #: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19 #, c-format msgid "\t- Special discounts for products and services at MandrakeStore" msgstr "\t- Speciale kortingen voor produkten en diensten bij MandrakeStore" #: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20 #: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19 #: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21 #: share/advertising/pwp-09.pl:20 #, c-format msgid "\t- Plus much more" msgstr "\t- Plus veel meer" #: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22 #: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22 #, c-format msgid "For more information, please visit www.mandrakeclub.com" msgstr "Voor meer informatie, bezoek www.mandrakeclub.com" #: share/advertising/dis-11.pl:13 #, c-format msgid "Do you require assistance?" msgstr "Kunt u assistentie gebruiken?" #: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16 #: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15 #, c-format msgid "MandrakeExpert is the primary source for technical support." msgstr "" "MandrakeExpert is de primaire bron voor technische ondersteuning." #: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18 #: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17 #, c-format msgid "" "If you have Linux questions, subscribe to MandrakeExpert at www." "mandrakeexpert.com" msgstr "" "Indien u Linuxvragen heeft, meldt u zich dan aan bij MandrakeExpert op " "www.mandrakeexpert.com" #: share/advertising/dwd-01.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the Open Source Model and fully respects the " "General Public License. This new release is the result of collaboration " "between MandrakeSoft's team of developers and the worldwide community of " "Mandrakelinux contributors." msgstr "" "Mandrakelinux legt zich toe op het Open Source-model en handelt geheel naar " "de General Public License. Deze nieuwe uitgave is het resultaat van " "samenwerking tussen MandrakeSofts' team van ontwikkelaars en de wereldwijde " "community van personen die bijdragen." #: share/advertising/dwd-02.pl:13 #, c-format msgid "Join the Mandrakelinux community!" msgstr "Kom bij de Mandrakelinux-community!" #: share/advertising/dwd-02.pl:15 #, c-format msgid "" "If you would like to get involved, please subscribe to the \"Cooker\" " "mailing list by visiting mandrake-linux.com/cooker" msgstr "" "Mocht u betrokken willen raken, abonneert u zich dan op de \"Cooker\" e-" "maillijst door een bezoek aan mandrake-linux.com/cooker" #: share/advertising/dwd-02.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www.mandrake-" "linux.com!" msgstr "" "Om meer te weten te komen over onze dynamische community, kom eens langs op " "www.mandrakelinux.com!" #: share/advertising/dwd-03.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "Wat is Mandrakelinux?" #: share/advertising/dwd-03.pl:15 #, c-format msgid "" "Mandrakelinux is an Open Source distribution created with thousands of the " "choicest applications from the Free Software world. Mandrakelinux is one of " "the most widely used Linux distributions worldwide!" msgstr "" "Mandrakelinux is een Open Source-distributie, gemaakt met duizenden " "uitgelezen programma's uit de wereld van de Vrije Software. Mandrakelinux is " "één van de meestgebruikte Linuxdistributies ter wereld!" #: share/advertising/dwd-03.pl:17 #, c-format msgid "" "Mandrakelinux includes the famous graphical desktops KDE and GNOME, plus the " "latest versions of the most popular Open Source applications." msgstr "" "Mandrakelinux bevat de beroemde grafische werkomgevingen KDE en GNOME, plus " "de laatste versies van de populairste Open Source-toepassingen." #: share/advertising/dwd-04.pl:13 #, c-format msgid "" "Mandrakelinux is widely known as the most user-friendly and the easiest to " "install and easy to use Linux distribution." msgstr "" "Mandrakelinux is algemeen bekend als de gebruikersvriendelijkste en " "makkelijkst te installeren Linuxdistributie." #: share/advertising/dwd-04.pl:15 #, c-format msgid "Find out about our Personal Solutions:" msgstr "Kom meer te weten over Personal Solutions:" #: share/advertising/dwd-04.pl:16 #, c-format msgid "\t- Find out Mandrakelinux on a bootable CD with MandrakeMove" msgstr "\t- Ontdek Mandrakelinux op een opstartbare CD met MandrakeMove" #: share/advertising/dwd-04.pl:17 #, c-format msgid "" "\t- If you use Linux mostly for Office, Internet and Multimedia tasks, " "Discovery perfectly meets your needs" msgstr "" "\t- Als u Linux meestal voor kantoor, internet en multimediataken gebruikt, " "dan komt Discovery perfect tegemoet aan uw wensen" #: share/advertising/dwd-04.pl:18 #, c-format msgid "" "\t- If you appreciate the largest selection of software including powerful " "development tools, PowerPack is for you" msgstr "" "\t - Waardeert u de grootste selectie aan software waaronder krachtige " "ontwikkelprogramma's, dan is PowerPack iets voor u" #: share/advertising/dwd-04.pl:19 #, c-format msgid "" "\t- If you require a full-featured Linux solution customized for small to " "medium-sized networks, choose PowerPack+" msgstr "" "\t- Vereist u een alleskunnende Linuxoplossing die toegesneden is op kleine " "tot middelgrote netwerken, kies dan PowerPack+" #: share/advertising/dwd-05.pl:13 #, c-format msgid "Find out also our Business Solutions!" msgstr "Kom meer te weten over onze Business Solutions!" #: share/advertising/dwd-05.pl:15 #, c-format msgid "" "Corporate Server: the ideal solution for entreprises. It is a " "complete \"all-in-one\" solution that includes everything needed to rapidly " "deploy world-class Linux server applications." msgstr "" "Corporate Server: de ideale oplossing voor ondernemingen. Het is een " "complete \"alles-in-één\"-oplossing die alles bevat dat nodig is om op korte " "termijn wereldklasse Linux-servertoepassingen uit te rollen." #: share/advertising/dwd-05.pl:17 #, c-format msgid "" "Multi Network Firewall: based on Linux 2.4 \"kernel secure\" to " "provide multi-VPN as well as multi-DMZ functionalities. It is the perfect " "high performance security solution." msgstr "" "Multi Network Firewall: gebaseerd op de \"secure\" Linux 2.4-kernelom " "multi-VPN te bieden, zowel als multi-DMZ-functionaliteit. Het is de perfecte " "beveiligingsoplossing met hoge prestaties." #: share/advertising/dwd-05.pl:19 #, c-format msgid "" "MandrakeClustering: the power and speed of a Linux cluster combined " "with the stability and easy-of-use of the world-famous Mandrakelinux " "distribution. A unique blend for incomparable HPC performance." msgstr "" "MandrakeClustering: de kracht en snelheid van een Linuxcluster " "gecombineerd met de stabiliteit en het gebruiksgemak van de wereldberoemde " "Mandrakelinux-distributie. Een unieke combinatie voor onvergelijkbare HPC-" "prestaties." #: share/advertising/dwd-06.pl:15 #, c-format msgid "" "Find all MandrakeSoft products at MandrakeStore -- our full service e-" "commerce platform." msgstr "" "Alle MandrakeSoft-produkten zijn te vinden op MandrakeStore -- ons " "uitgebreide service/e-commerce platform." #: share/advertising/dwd-06.pl:17 #, c-format msgid "" "Find out also support incidents if you have any problems, from standard to " "professional support, from 1 to 50 incidents, take the one which meets " "perfectly your needs!" msgstr "" "In geval van problemen bieden wij ondersteunings-\"incidents\" aan. Van " "standaard- tot professionele ondersteuning, van 1 to 50 incidenten, kies " "datgene dat bij uw wensen past!" #: share/advertising/dwd-07.pl:13 #, c-format msgid "Become a MandrakeClub member!" msgstr "Wordt MandrakeClub-lid!" #: share/advertising/dwd-07.pl:15 #, c-format msgid "" "Take advantage of valuable benefits, products and services by joining " "Mandrake Club, such as:" msgstr "" "Profiteer van waardevolle voordelen, produkten en diensten door u aan te " "sluiten bij MandrakeClub, zoals:" #: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13 #: share/advertising/pwp-10.pl:13 #, c-format msgid "Do you require assistance?" msgstr "Kunt u assistentie gebruiken?" #: share/advertising/dwd-09.pl:16 #, c-format msgid "Note" msgstr "Let op" #: share/advertising/dwd-09.pl:18 #, c-format msgid "This is the Mandrakelinux Download version." msgstr "Dit is de Mandrakelinux Downloadversie." #: share/advertising/dwd-09.pl:20 #, c-format msgid "" "The free download version does not include commercial software, and " "therefore may not work with certain modems (such as some ADSL and RTC) and " "video cards (such as ATI® and NVIDIA®)." msgstr "" "De gratis downloadversie bevat geen commerciële software, en daarom zal het " "wellicht niet kunnen werken met bepaalde modems (zoals sommige voor ADSL en " "RTC) en videokaarten (zoals ATI® en NVIDIA®)." #: share/advertising/ppp-01.pl:17 #, c-format msgid "" "Your new Mandrakelinux distribution and its many applications are the result " "of collaborative efforts between MandrakeSoft developers and Mandrakelinux " "contributors throughout the world." msgstr "" "Uw nieuwe Mandrakelinux besturingssysteem en haar vele toepassingen zijn het " "resultaat van samenwerking en inspanningen van MandrakeSoft-ontwikkelaars en " "personen vanuit de hele wereld die aan Mandrakelinux hebben bijgedragen." #: share/advertising/ppp-02.pl:13 #, c-format msgid "PowerPack+" msgstr "PowerPack+" #: share/advertising/ppp-02.pl:15 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-sized " "networks. PowerPack+ increases the value of the standard PowerPack by adding " "a comprehensive selection of world-class server applications." msgstr "" "PowerPack+ is een alleskunnende Linuxoplossing voor kleine tot middelgrote " "netwerken. PowerPack+ vergroot de waarde van het standaard PowerPack doordat " "er een veelomvattende selectie van wereldklasse servertoepassingen bij zit." #: share/advertising/ppp-02.pl:17 #, c-format msgid "" "It is the only Mandrakelinux product that includes the groupware solution." msgstr "" "Het is het enige Mandrakelinux-produkt dat ene groupware-oplossing bevat." #: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13 #, c-format msgid "Choose your graphical Desktop environment!" msgstr "Kies uw grafische werkomgeving!" #: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15 #, c-format msgid "" "When you log into your Mandrakelinux system for the first time, you can " "choose between several popular graphical desktops environments, including: " "KDE, GNOME, WindowMaker, IceWM, and others." msgstr "" "Wanneer u zich voor de eerste keer aanmeldt op uw Mandrakelinux-systeem, " "kunt u kiezen tussen diverse populaire werkomgevingen, waaronder: KDE, " "GNOME, WindowMaker, IceWM, en andere." #: share/advertising/ppp-04.pl:13 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for all " "tasks:" msgstr "" "In het Mandrakelinux-menu vindt u makkelijk te gebruiken toepassingen voor " "alle werkzaamheden:" #: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15 #, c-format msgid "\t- Create, edit and share office documents with OpenOffice.org" msgstr "" "\t- Kantoordocumenten maken, bewerken en delen met OpenOffice.org" #: share/advertising/ppp-04.pl:16 #, c-format msgid "" "\t- Take charge of your personal data with the integrated personal " "information suites: Kontact and Evolution" msgstr "" "\t- Wordt de baas over uw persoonlijke gegevens met de geïntegreerde " "personlijke informatiesuites: Kontact en Evolution" #: share/advertising/ppp-04.pl:17 #, c-format msgid "\t- Browse the Web with Mozilla and Konqueror" msgstr "\t- Blader door het Web met Mozilla en Konqueror" #: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18 #, c-format msgid "\t- Participate in online chat with Kopete" msgstr "\t - Neem deel in online chat met Kopete" #: share/advertising/ppp-04.pl:19 #, c-format msgid "" "\t- Listen to audio CDs and music files with KsCD and Totem" msgstr "" "\t- Luister naar audio-CD's en muziekbestanden met KsCD en Totem" #: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20 #, c-format msgid "\t- Edit images and photos with The Gimp" msgstr "\t- Bewerk afbeeldingen en foto's met The Gimp" #: share/advertising/ppp-05.pl:13 #, c-format msgid "" "PowerPack+ includes everything needed for developing and creating your own " "software, including:" msgstr "" "PowerPack+ bevat alles dat u nodig heeft om uw eigen software te ontwikkelen " "en te creëren, waaronder:" #: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16 #, c-format msgid "" "\t- Kdevelop: a full featured, easy to use Integrated Development " "Environment for C++ programming" msgstr "" "\t- Kdevelop: een makkelijk in het gebruik Integrated Development " "Environment voor programmeren in C++" #: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17 #, c-format msgid "\t- GCC: the GNU Compiler Collection" msgstr "\t- GCC: de GNU Compiler Collection" #: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18 #, c-format msgid "\t- GDB: the GNU Project debugger" msgstr "\t- GDB: de GNU Project debugger" #: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16 #, c-format msgid "\t- Emacs: a customizable and real time display editor" msgstr "\t- Emacs: een aanpasbare en real time display editor" #: share/advertising/ppp-05.pl:19 #, c-format msgid "" "\t- Xemacs: open source text editor and application development system" msgstr "" "\t- Xemacs: open source teksteditor en toepassingen-ontwikkelsysteem" #: share/advertising/ppp-05.pl:20 #, c-format msgid "" "\t- Vim: advanced text editor with more features than standard Vi" msgstr "" "\t- Vim: geavanceerde teksteditor met meer functies dan standaard-Vi" #: share/advertising/ppp-06.pl:13 #, c-format msgid "Discover the full-featured groupware solution!" msgstr "Ontdek de overcomplete groupware-oplossing!" #: share/advertising/ppp-06.pl:15 #, c-format msgid "It includes both server and client features for:" msgstr "Het bevat zowel server- als clientfunctionaliteit voor:" #: share/advertising/ppp-06.pl:16 #, c-format msgid "\t- Sending and receiving emails" msgstr "\t- Versturen en ontvangen van e-mail" #: share/advertising/ppp-06.pl:17 #, c-format msgid "" "\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and " "receiving), Task Requests (sending and receiving)" msgstr "" "\t- Kalender, Takenlijst, Memo's, Contactgegevens, Vergaderingsaanvraag " "(sturen en ontvangen) en Taakaanvraag (sturen en ontvangen)" #: share/advertising/ppp-06.pl:18 #, c-format msgid "\t- Address Book (server and client)" msgstr "\t- Adresboek (server en client)" #: share/advertising/ppp-07.pl:13 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" "Geef uw zakelijke netwerk meer kracht met premier server solutions " "waaronder:" #: share/advertising/ppp-07.pl:15 #, c-format msgid "\t- Samba: File and print services for MS-Windows clients" msgstr "\t- Samba: Bestands- en afdrukdiensten voor MS-Windows clients" #: share/advertising/ppp-07.pl:16 #, c-format msgid "\t- Apache: The most widely used Web server" msgstr "\t- Apache: De meestgebruikte Webservre" #: share/advertising/ppp-07.pl:17 #, c-format msgid "\t- MySQL: The world's most popular Open Source database" msgstr "\t- MySQL: 's Werelds populairste Open Source database" #: share/advertising/ppp-07.pl:18 #, c-format msgid "" "\t- CVS: Concurrent Versions System, the dominant open-source network-" "transparent version control system" msgstr "" "\t- CVS: Concurrent Versions System, het dominante open-source " "netwerk-transparante versiecontrolesysteem" #: share/advertising/ppp-07.pl:19 #, c-format msgid "" "\t- ProFTPD: the highly configurable GPL-licensed FTP server software" msgstr "" "\t- ProFTPD: de uiterst configureerbare FTP-server onder GPL-licentie" #: share/advertising/ppp-07.pl:20 #, c-format msgid "\t- And others" msgstr "\t- En andere" #: share/advertising/pwp-01.pl:17 #, c-format msgid "" "Your new Mandrakelinux distribution is the result of collaborative efforts " "between MandrakeSoft developers and Mandrakelinux contributors throughout " "the world." msgstr "" "Uw nieuwe Mandrakelinux besturingssysteem is het resultaat van samenwerking " "en inspanningen van MandrakeSoft-ontwikkelaars en personen vanuit de hele " "wereld die aan Mandrakelinux hebben bijgedragen." #: share/advertising/pwp-01.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development of our " "latest release." msgstr "" "Wij willen iedereen graag bedanken die deel heeft genomen aan de " "ontwikkeling van onze nieuwste uitgave." #: share/advertising/pwp-02.pl:13 #, c-format msgid "PowerPack" msgstr "PowerPack" #: share/advertising/pwp-02.pl:15 #, c-format msgid "" "PowerPack is MandrakeSoft's premier Linux desktop product. In addition to " "being the easiest and the most user-friendly Linux distribution, PowerPack " "includes thousands of applications - everything from the most popular to the " "most technical." msgstr "" "PowerPack is MandrakeSofts' werkplek-Linux paradepaartje. Behalve dat het de " "makkelijkste en gebruikersvriendelijkste Linuxdistributie is, bevat " "PowerPack duizenden toepassingen - alles van de populairste tot de meest " "technische." #: share/advertising/pwp-04.pl:13 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for all of " "your tasks:" msgstr "" "In het Mandrakelinux-menu vindt u makkelijk te gebruiken toepassingen voor " "alle werkzaamheden:" #: share/advertising/pwp-04.pl:16 #, c-format msgid "" "\t- Take charge of your personal data with the integrated personal " "information suites Kontact and Evolution" msgstr "" "\t- Wordt de baas over uw persoonlijke gegevens met de geïntegreerde " "personlijke informatiesuites: Kontact en Evolution" #: share/advertising/pwp-04.pl:17 #, c-format msgid "\t- Browse the Web with Mozilla and Konqueror" msgstr "\t- Blader door het Web met Mozilla en Konqueror" #: share/advertising/pwp-04.pl:19 #, c-format msgid "\t- Listen to audio CDs and music files with KsCD and Totem" msgstr "" "\t- Luister naar audio-CD's en muziekbestanden met KsCD en Totem" #: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13 #, c-format msgid "Development tools" msgstr "Ontwikkelprogramma's" #: share/advertising/pwp-05.pl:15 #, c-format msgid "" "PowerPack includes everything needed for developing and creating your own " "software, including:" msgstr "" "PowerPack bevat alles dat u nodig heeft om uw eigen software te ontwikkelen " "en te creëren, waaronder:" #: share/advertising/pwp-06.pl:15 #, c-format msgid "And of course the editors!" msgstr "En natuurlijk de editors!" #: share/advertising/pwp-06.pl:17 #, c-format msgid "" "\t- Xemacs: another open source text editor and application " "development system" msgstr "" "\t- Xemacs: nog een open source teksteditor en toepassings-" "ontwikkelsysteem" #: share/advertising/pwp-06.pl:18 #, c-format msgid "" "\t- Vim: an advanced text editor with more features than standard Vi" msgstr "" "\t- Vim: geavanceerde teksteditor met meer functies dan standaard-Vi" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Dit programma is vrije software; U mag het herdistribueren en/of\n" "wijzigen onder de voorwaarden van de GNU General Public License als\n" "geplubiceerd door the Free Software Foundation; ofwel versie 2, als\n" "ook (uw eigen optie) elke latere versie.\n" "\n" "Dit programma wordt gedistribueerd in de hoop dat het bruikbaar\n" "zal zijn, maar ZONDER ENIGE GARANTIE; zelfs zonder de impliciete \n" "garantie voor VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN\n" "SPECIFIEK DOEL. Zie de GNU General Public License voor meer\n" "details.\n" "\n" "U zou een kopie ontvangen moeten hebben van de GNU General\n" "Public License bij dit programma; indien dit niet het geval is,\n" "schrijf dan een brief naar de Free Software Foundation, Inc.,\n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Toepassing voor reservekopie en herstellen\n" "\n" "--default : standaardmappen opslaan.\n" "--debug : alle debugberichten tonen.\n" "--show-conf : lijst van bestanden of mappen om reservekopie van te " "maken.\n" "--config-info : opties in configuratiebestand uitleggen (voor niet-X " "gebruikers).\n" "--daemon : daemon-configuratie gebruiken. \n" "--help : deze melding tonen.\n" "--version : versienummer tonen.\n" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - de opstartlader configureren\n" " --splash - het opstartthema configureren\n" "standaardmodus: configureren van de automatische aameldingsfunctie" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" "[OPTIES] [PROGRAMMA_NAAM]\n" "\n" "OPTIES:\n" " --help - deze hulptekst tonen.\n" " --report - moet een mandrake-hulpprogramma zijn\n" " --incident - moet een mandrake-hulpprogramma zijn" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" "[--add]\n" " --add - \"netwerkinterface toevoegen\"-wizard\n" " --del - \"netwerkinterface verwijderen\"-wizard\n" " --skip-wizard - verbindingen beheren\n" " --internet - internet configureren\n" " --wizard - als --add" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "\n" "Importeren en bijhouden van lettertypen\n" "\n" "OPTIES:\n" "--windows_import : importeren vanaf alle beschikbare windows-partities.\n" "--xls_fonts : alle lettertypen die reeds in xls staan, tonen\n" "--install : accepteert ieder lettertype of map.\n" "--uninstall : een lettertype of map met lettertypen deïnstalleren.\n" "--replace : alle reeds bestaande lettertypen vervangen\n" "--application : 0 geen toepassing.\n" " : 1 alle beschikbare toepassingen ondersteund.\n" " : naam_van_toepassing zoals so voor staroffice \n" " : en gs voor ghostscript voor slechts deze." #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPTIES]...\n" "Mandrake Terminal Server Configuratieprogramma\n" "--enable : MTS inschakelen\n" "--disable : MTS uitschakelen\n" "--start : MTS starten\n" "--stop : MTS stoppen\n" "--adduser : bestaande gebruiker toevoegen aan MTS (gebruikersnaam " "vereist)\n" "--deluser : bestaande gebruiker uit MTS verwijderen (gebruikersnaam " "vereist)\n" "--addclient : client-computer toevoegen aan MTS (MAC-adres, IP, nbi " "imagenaam vereist)\n" "--delclient : client-computer verwijderen uit MTS (MAC-adres, IP, nbi " "imagenaam vereist)" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[toetsenbord]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=mijnbestand] [--word=mijnwoord] [--explain=regexp] [--alert]" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" "[OPTIES]\n" "Toepassing voor het volgen van netwerk & internetverbinding\n" "\n" "--defaultintf interface : deze interface standaard tonen\n" "--connect : met internet verbinden wanneer niet reeds verbonden\n" "--disconnect : internetverbinding verbreken wanneer reeds verbonden\n" "--force : met (dis)connect: verbinden/verbreken forceren.\n" "--status : geeft 1 als verbonden, anders 0 en sluit af\n" "--quiet : niet interactief. Te gebruiken met (dis)connect." #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPTION]...\n" " --no-confirmation eerste bevestigingsvraag niet stellen in " "MandrakeUpdate modus\n" " --no-verify-rpm pakket-handtekeningen niet verifiëren\n" " --changelog-first veranderingenlogboek voor bestandslijst weergeven " "in omschrijvingsvenster\n" " --merge-all-rpmnew voorstellen om alle gevonden .rpmnew/.rpmsave " "bestanden samen te voegen" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=app] [--update-sane=sane_bron_map] [--update-usbtable] " "[--dynamic=app]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [alles]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" #: standalone.pm:128 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Gebruik: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:87 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Gelieve uit te loggen en daarna Ctrl-Alt-Backspace te gebruiken" #: standalone/XFdrake:91 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" "U dient zich af te melden en weer aan te melden voordat de veranderingen " "effect hebben" #: standalone/drakTermServ:77 #, c-format msgid "Useless without Terminal Server" msgstr "Nutteloos zonder Terminal Server" #: standalone/drakTermServ:114 standalone/drakTermServ:121 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s vereist een gebruikersnaam...\n" #: standalone/drakTermServ:134 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s vereist hostnaam, MAC addres, IP, nbi-beeldbestand, 0/1 voor " "THIN_CLIENT, 0/1 voor lokale configuratie...\n" #: standalone/drakTermServ:141 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s vereist een hostnaam...\n" #: standalone/drakTermServ:153 #, c-format msgid "You must be root to read configuration file. \n" msgstr "U dient root te zijn om het configuratiebestand te lezen. \n" #: standalone/drakTermServ:238 standalone/drakTermServ:511 #: standalone/drakfont:575 #, c-format msgid "OK" msgstr "OK" #: standalone/drakTermServ:249 standalone/drakTermServ:252 #, c-format msgid "Terminal Server Configuration" msgstr "Terminalserver-configuratie" #: standalone/drakTermServ:267 #, c-format msgid "Enable Server" msgstr "Activeer Server" #: standalone/drakTermServ:273 #, c-format msgid "Disable Server" msgstr "Deactiveer Server" #: standalone/drakTermServ:281 #, c-format msgid "Start Server" msgstr "Start Server" #: standalone/drakTermServ:287 #, c-format msgid "Stop Server" msgstr "Stop Server" #: standalone/drakTermServ:295 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Etherboot Floppy/ISO" #: standalone/drakTermServ:299 #, c-format msgid "Net Boot Images" msgstr "Netwerk-beeldbestanden voor opstarten" #: standalone/drakTermServ:305 #, c-format msgid "Add/Del Users" msgstr "Gebruikers toevoegen/verwijderen" #: standalone/drakTermServ:309 #, c-format msgid "Add/Del Clients" msgstr "Clients toevoegen/verwijderen" #: standalone/drakTermServ:320 standalone/drakbug:54 #, c-format msgid "First Time Wizard" msgstr "Eerste keer-wizard" #: standalone/drakTermServ:351 standalone/drakTermServ:352 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:358 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup dhcp.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:403 #, c-format msgid "Cancel Wizard" msgstr "Wizard annuleren" #: standalone/drakTermServ:415 #, c-format msgid "Please save dhcpd config!" msgstr "Sla de dhcpd-configuratie op!" #: standalone/drakTermServ:443 #, c-format msgid "Use thin clients." msgstr "Thin clients gebruiken." #: standalone/drakTermServ:445 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:457 standalone/drakTermServ:1071 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:464 #, c-format msgid "Creating net boot images for all kernels" msgstr "Bezig met aanmaken van netwerk-opstartbeeldbestanden voor alle kernels" #: standalone/drakTermServ:465 standalone/drakTermServ:763 #: standalone/drakTermServ:779 #, c-format msgid "This will take a few minutes." msgstr "Dit kan enige minuten duren." #: standalone/drakTermServ:469 standalone/drakTermServ:489 #, c-format msgid "Done!" msgstr "Klaar!" #: standalone/drakTermServ:475 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" "Bezig met synchroniseren van server-gebruikerslijst met clientlijst, met " "root inbegrepen." #: standalone/drakTermServ:495 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" "Om de gemaakte wijzigingen voor thin clients te activeren, moet het " "displaybeheer opnieuw gestart worden. Nu herstarten?" #: standalone/drakTermServ:530 #, c-format msgid "Terminal Server Overview" msgstr "Terminalserver-overzicht" #: standalone/drakTermServ:531 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - Etherboot-ondersteunende opstartbeeldbestanden aanmaken:\n" " \tOm een kernel via etherboot op te starten, is een speciaal\n" " \tkernel/initrd beeldbestand benodigd.\n" " \tmkinitrd-net neemt het grootste gedeelte van dit werk voor zijn\n" " \trekening en drakTermServ is gewoon een grafische interface\n" " \tom het beheer van deze beeldbestanden te vereenvoudigen.\n" " \tOm het bestand /etc/dhcpd.conf.etherboot-pcimap.include aan\n" " \tte maken dat ingesloten wordt in dhcpd.conf, dient u eerst\n" " \tde etherboot-beeldbestanden aan te maken voor tenminste één\n" " \tvolledige kernel." #: standalone/drakTermServ:537 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" " - /etc/dhcpd.conf onderhouden:\n" " \t\tOm clients van het netwerk op te starten, heeft elke client een " "dhcpd.conf-ingang nodig, om een IP-adres toe te wijzen\n" " \t\ten opstartbeeldbestanden naar de computer te sturen. " "drakTermServ helpt deze ingangen te maken/verwijderen.\t\t\t\n" " \t\t(PCI-kaarten mogen het beeldbestand weglaten - etherboot zal het " "correcte beeldbestand opvragen. U dient\n" " \t\ttevens te overwegen dat wanneer etherboot naar de beeldbestanden " "zoekt, het namen verwacht zoals\n" " \t\tboot-3c59x.nbi, dus niet boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tEen typisch dhcpd.conf-blokje om een schijfloze client te " "ondersteunen, ziet er zo uit:" #: standalone/drakTermServ:555 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" "\t\t\tAlhoewel u een poule van IP-adressen kunt gebruiken, in plaats van een " "specifieke ingang maken voor een client-computer, vergemakkelijkt het\n" "\t\t\tgebruik van een vast adresschema het gebruik van de functionaliteit\n" "\t\t\ta van client-specifieke configuratiebestanden welke ClusterNFS biedt.\n" "\t\t\t\n" "\t\t\tMerk op: De \"#type\"-ingang wordt slechts door drakTermServ gebruikt. " "Clients kunnen ofwel \"thin\"*/\n" "\t\t\tzijn, of 'fat'. Thin clients voeren de meeste software uit op de " "server via xdmcp, terwijl fat clients de meeste\n" "\t\t\tsoftware op de client-computer uitvoeren. Een speciale inittab, \"%s\" " "wordt\n" "\t\t\tweggeschreven voor de thin clients. Systeemconfiguratiebestanden xdm-" "config, kdmrc, en gdm.conf worden aangepast\n" "\t\t\tals thin clients gebruikt worden, om xdmcp in te schakelen. Omdat er " "beveiligingsproblemen zijn met het gebruik van xdmcp,\n" "\t\t\tworden hosts.deny en hosts.allow gewijzigd om toegang te beperken tot " "het lokale subnet.\n" "\t\t\t\n" "\t\t\tMerk op: U dient de server te stoppen/starten na het toevoegen of " "wijzigen van clients." #: standalone/drakTermServ:575 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" " - /etc/exports onderhouden:\n" " \t\tClusternfs laat u het root-bestandssysteem exportern naar " "schijfloze clients. drakTermServ\n" " \t\tstelt de correcte ingang in om anonieme toegang tot het root-" "bestandssysteem vanaf schijfloze\n" " \t\tclients toe te staan.\n" "\n" " \t\tEen typisch exports-blok voor clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWaarbij SUBNET/MASK gedefinieerd is voor uw netwerk." #: standalone/drakTermServ:587 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - %s onderhouden:\n" " \t\tOm gebruikers zich te laten aanmelden op het systeem vanaf een " "schijfloze client, dient hun \n" " \t\tingang in /etc/shadow gedupliceerd te worden in\n" "%s. drakTermServ helpt\n" " \t\thierbij door systeemgebruikers toe te voegen of te verwijderen " "uit dit bestand." #: standalone/drakTermServ:591 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - Per-client %s:\n" " \t\tMet behulp van clusternfs kan elke schijfloze client zijn eigen " "unieke configuratiebestanden\n" " \t\thebben op het root-bestandssysteem van de server. In de toekomst " "zal drakTermServ deze\n" " \t\tbestanden helpen aanmaken." #: standalone/drakTermServ:596 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - Per-client systeemconfiguratiebestanden:\n" " \tMet behulp van clusternfs, kan elke schijfloze client zijn\n" " \teigen unieke configuratebestanden\n" " \thebben op het root-bestandssysteem van de server. Door het\n" " \ttoestaan van lokale client-apparatuurconfiguratie, kunnen\n" " \tclients bestanden aanpassen \n" " \tzoals /etc/modules.conf, /etc/sysconfig/mouse en \n" " \t/etc/sysconfig/keyboard.\n" "Merk op: Het inschakelen van lokale client-apparatuurconfiguratie maakt het\n" "aanmelden als root op de terminal niet mogelijk op iedere computer waar " "deze\n" "functionaliteit aanwezig is. De lokale configuratie kan weer uitgezet \n" "worden, met behoud van configuratiebestanden, zodra de clientcomputer \n" "geconfigureerd is." #: standalone/drakTermServ:605 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ zal dit bestand configureren zodat het samenwerkt " "met de beeldbestanden aangemaakt door\n" " \t\tmkinitrd-net, en de ingangen in /etc/dhcpd.conf, om het " "opstartbeeld te bedienen aan elke \n" " \t\tschijfloze client.\n" "\n" " \t\tEen typisch tftp-configuratiebestand ziet er zo uit:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tDe veranderingen ten opzichte van de standaardinstallatie zijn " "het veranderen van de disable-vlag naar\n" " \t\t'no' en het veranderen van het directory path naar /var/lib/" "tftpboot, waar mkinitrd-net\n" " \t\tzijn beeldbestanden plaatst." #: standalone/drakTermServ:626 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" " - Etherboot diskettes/CD's aanmaken:\n" " \tDe schijfloze client-computers benodigen ofwel ROM-\n" " \tbeeldbestanden op de NIC, of een opstartdiskette\n" " \tof -CD om de opstartprocedure te initiëren. drakTermServ helpt\n" " \tbij het genereren van deze beeldbestanden,\n" " \tgebaseerd op de NIC in de client-computer.\n" " \t\t\n" " \tEen simpel voorbeeld van het handmatig aanmaken van een\n" " \topstartdiskette voor een 3Com 3c509:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" #: standalone/drakTermServ:661 #, c-format msgid "Boot Floppy" msgstr "Opstartdiskette" #: standalone/drakTermServ:663 #, c-format msgid "Boot ISO" msgstr "Opstart-ISO" #: standalone/drakTermServ:665 #, c-format msgid "PXE Image" msgstr "PXE-beeldbestand" #: standalone/drakTermServ:734 #, c-format msgid "Default kernel version" msgstr "Standaard kernelversie" #: standalone/drakTermServ:761 #, c-format msgid "Build Whole Kernel -->" msgstr "Gehele kernel bouwen -->" #: standalone/drakTermServ:768 #, c-format msgid "No kernel selected!" msgstr "Geen kernel geselecteerd!" #: standalone/drakTermServ:771 #, c-format msgid "Build Single NIC -->" msgstr "Enkele NIC bouwen -->" #: standalone/drakTermServ:775 #, c-format msgid "No NIC selected!" msgstr "Geen NIC geselecteerd!" #: standalone/drakTermServ:778 #, c-format msgid "Build All Kernels -->" msgstr "Alle kernels bouwen -->" #: standalone/drakTermServ:786 #, c-format msgid "<-- Delete" msgstr "<-- Verwijderen" #: standalone/drakTermServ:793 #, c-format msgid "Delete All NBIs" msgstr "Alle NBI's verwijderen" #: standalone/drakTermServ:880 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Geeft aan dat het wachtwoord in de systeemdatabase verschilt van\n" " degene in de Terminal Server database.\n" "Verwijder de gebruiker en voeg hem opnieuw toe aan de Terminal Server om de " "loginnaam weer in te schakelen" #: standalone/drakTermServ:885 #, c-format msgid "Add User -->" msgstr "Gebruiker toevoegen -->" #: standalone/drakTermServ:891 #, c-format msgid "<-- Del User" msgstr "<-- Gebruiker verwijderen" #: standalone/drakTermServ:927 #, c-format msgid "type: %s" msgstr "type: %s" #: standalone/drakTermServ:931 #, c-format msgid "local config: %s" msgstr "lokale configuratie: %s" #: standalone/drakTermServ:961 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Lokale apparatuurconfiguratie\n" "toestaan." #: standalone/drakTermServ:970 #, c-format msgid "No net boot images created!" msgstr "Geen beeldbestanden voor opstarten vanaf netwerk gecreëerd!" #: standalone/drakTermServ:988 #, c-format msgid "Thin Client" msgstr "Thin client" #: standalone/drakTermServ:992 #, c-format msgid "Allow Thin Clients" msgstr "Lichte clients toestaan" #: standalone/drakTermServ:993 #, c-format msgid "Add Client -->" msgstr "Client Toevoegen -->" #: standalone/drakTermServ:1007 #, c-format msgid "type: fat" msgstr "type: fat" #: standalone/drakTermServ:1008 #, c-format msgid "type: thin" msgstr "type: thin" #: standalone/drakTermServ:1015 #, c-format msgid "local config: false" msgstr "Lokale configuratie: onwaar" #: standalone/drakTermServ:1016 #, c-format msgid "local config: true" msgstr "lokale configuratie: waar" #: standalone/drakTermServ:1024 #, c-format msgid "<-- Edit Client" msgstr "<-- Client bewerken" #: standalone/drakTermServ:1050 #, c-format msgid "Disable Local Config" msgstr "Lokale configuratie uitschakelen" #: standalone/drakTermServ:1057 #, c-format msgid "Delete Client" msgstr "<-- Client verwijderen" #: standalone/drakTermServ:1066 #, c-format msgid "dhcpd Config..." msgstr "dhcpd configureren..." #: standalone/drakTermServ:1082 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Het displaybeheer moet opnieuw worden gestart om alle wijzigingen in werking " "te laten treden. \n" " (service dm restart - op de opdrachtaanwijzing)" #: standalone/drakTermServ:1122 #, c-format msgid "Thin clients won't work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1138 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1168 #, c-format msgid "Subnet:" msgstr "Subnet:" #: standalone/drakTermServ:1175 #, c-format msgid "Netmask:" msgstr "Netmasker:" #: standalone/drakTermServ:1182 #, c-format msgid "Routers:" msgstr "Routers:" #: standalone/drakTermServ:1189 #, c-format msgid "Subnet Mask:" msgstr "Subnetmasker:" #: standalone/drakTermServ:1196 #, c-format msgid "Broadcast Address:" msgstr "Broadcast-adres:" #: standalone/drakTermServ:1203 #, c-format msgid "Domain Name:" msgstr "Domeinnaam:" #: standalone/drakTermServ:1211 #, c-format msgid "Name Servers:" msgstr "Name servers:" #: standalone/drakTermServ:1222 #, c-format msgid "IP Range Start:" msgstr "Begin IP-bereik:" #: standalone/drakTermServ:1223 #, c-format msgid "IP Range End:" msgstr "Eind IP-bereik:" #: standalone/drakTermServ:1275 #, c-format msgid "dhcpd Server Configuration" msgstr "Configuratie van dhcpd-server" #: standalone/drakTermServ:1276 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Het grootse deel van deze waarden zijn\n" "gehaald uit uw lopende systeem. \n" "U kunt ze zonodig aanpassen." #: standalone/drakTermServ:1279 #, c-format msgid "Dynamic IP Address Pool:" msgstr "Dynamisch IP-adrespool:" #: standalone/drakTermServ:1292 #, c-format msgid "Write Config" msgstr "Configuratie wegschrijven" #: standalone/drakTermServ:1411 #, c-format msgid "Please insert floppy disk:" msgstr "Plaats een diskette in het station:" #: standalone/drakTermServ:1415 #, c-format msgid "Couldn't access the floppy!" msgstr "Kon de diskette niet benaderen!" #: standalone/drakTermServ:1417 #, c-format msgid "Floppy can be removed now" msgstr "De diskette kan nu worden uitgenomen" #: standalone/drakTermServ:1420 #, c-format msgid "No floppy drive available!" msgstr "Geen diskettestation beschikbaar!" #: standalone/drakTermServ:1425 #, c-format msgid "PXE image is %s/%s" msgstr "PXE-beeldbestand is %s/%s" #: standalone/drakTermServ:1427 #, c-format msgid "Error writing %s/%s" msgstr "Fout bij het schrijven van %s/%s" #: standalone/drakTermServ:1436 #, c-format msgid "Etherboot ISO image is %s" msgstr "Etherboot ISO image is %s" #: standalone/drakTermServ:1438 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Er ging iets fout - Is mkisofs wel geïnstalleerd?" #: standalone/drakTermServ:1458 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Er moet eerst een /etc/dhcpd.conf worden aangemaakt!" #: standalone/drakTermServ:1619 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1637 #, c-format msgid "%s is not a user..\n" msgstr "%s is geen gebruiker...\n" #: standalone/drakTermServ:1638 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s is reeds een Terminalserver-gebruiker\n" #: standalone/drakTermServ:1640 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "Toevoegen van %s aan terminalserver mislukt!\n" #: standalone/drakTermServ:1642 #, c-format msgid "%s added to Terminal Server\n" msgstr "%s toegevoegd aan Terminalserver\n" #: standalone/drakTermServ:1694 #, c-format msgid "Deleted %s...\n" msgstr "%s verwijderd...\n" #: standalone/drakTermServ:1696 standalone/drakTermServ:1773 #, c-format msgid "%s not found...\n" msgstr "%s niet gevonden...\n" #: standalone/drakTermServ:1718 standalone/drakTermServ:1719 #: standalone/drakTermServ:1720 #, c-format msgid "%s already in use\n" msgstr "%s reeds in gebruik\n" #: standalone/drakTermServ:1744 #, c-format msgid "Can't open %s!" msgstr "Kan %s niet openen!" #: standalone/drakTermServ:1801 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow en /etc/hosts.deny reeds geconfigureerd - niet gewijzigd" #: standalone/drakTermServ:1958 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "Configuratie gewijzigd - clusternfs/dhcpd herstarten?" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "Fout!" #: standalone/drakautoinst:39 #, c-format msgid "I can't find needed image file `%s'." msgstr "Ik kan het benodigde beeld-bestand `%s' niet vinden." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Configuratieprogramma voor auto-installatie" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "U staat op het punt om een auto-installatiediskette te configureren. \n" "Deze functie is enigszins risicovol en moet met voorzorg gebruikt worden.\n" "\n" "Met deze functie zult u in staat zijn de installatie die u heeft uitgevoerd " "op deze computer te herhalen. Daarbij worden u bij enkele stappen vragen " "gesteld, om de bijbehorende waarden aan te passen.\n" "\n" "Voor een maximale graad van veiligheid, zal het partitioneren en formatteren " "nooit automatisch uitgevoerd worden, ongeacht wat u gekozen heeft gedurende " "de installatie van deze computer.\n" "\n" "Klik op Ok om door te gaan." #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "Opnieuw afspelen" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "handmatig" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Configuratie van automatische stappen" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Kiest u alstublieft voor elke stap of deze zich zal herhalen zoals bij uw " "installatie, of dat deze handmatig zal zijn" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Bezig met aanmaken van auto-installatiediskette" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Plaats nog een lege floppy in station %s (voor de stuurprogramma's)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Bezig met aanmaken van auto-installatiediskette (stuurprogramma's)" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Welkom.\n" "\n" "De parameters van de auto-installatie zijn aanwezig in de afdelingen aan de " "linkerkant" #: standalone/drakautoinst:252 standalone/drakgw:594 standalone/drakvpn:900 #: standalone/scannerdrake:374 #, c-format msgid "Congratulations!" msgstr "Gefeliciteerd!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "De diskette is met succes aangemaakt.\n" "U kunt nu uw installatie herhalen." #: standalone/drakautoinst:289 #, c-format msgid "Auto Install" msgstr "Auto-installatie" #: standalone/drakautoinst:358 #, c-format msgid "Add an item" msgstr "Item toevoegen" #: standalone/drakautoinst:365 #, c-format msgid "Remove the last item" msgstr "Het laatste item verwijderen" #: standalone/drakbackup:88 #, c-format msgid "hd" msgstr "hd" #: standalone/drakbackup:88 #, c-format msgid "tape" msgstr "tape" #: standalone/drakbackup:112 #, c-format msgid "No devices found" msgstr "Geen apparaten gevonden" #: standalone/drakbackup:154 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect is een uitbreiding voor de scripttaal Tcl die interactieve sessies " "zonder gebruikersinterventie mogelijk maakt." #: standalone/drakbackup:155 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Het wachtwoord voor dit systeem opslaan in de drakbackup-configuratie." #: standalone/drakbackup:156 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "Voor een multisessie-CD zal alleen de eerste sessie de CD-RW wissen. In " "andere gevallen wordt de CD-RW gewist voor elke reservekopie." #: standalone/drakbackup:157 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Deze optie slaat gewijzigde bestanden op. Het precieze gedrag hangt af van " "of incrementele of differentiële modus wordt gebruikt." #: standalone/drakbackup:158 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Incrementele reservekopieën slaan slechts bestanden op die gewijzigd of " "nieuw zijn sinds de laatste reservekopie." #: standalone/drakbackup:159 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Differentiële reservekopieën slaan enkel bestanden op die gewijzigd of nieuw " "zijn sinds de oorspronkelijke 'basis'-reservekopie." #: standalone/drakbackup:160 #, fuzzy, c-format msgid "" "This should be a local user or email addresse that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" "Dit dient een kommagescheiden lijst te zijn van lokale gebruikers of e-" "mailadressen waarnaartoe u de resultaten van de reservekopie wilt sturen. " "Een goed functionerende mail transfer agent op uw computer is benodigd." #: standalone/drakbackup:161 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Bestanden of jokers opgesomd in een .backupignore bestand bovenin een " "mappenboom worden niet gekopiëerd." #: standalone/drakbackup:162 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Voor reservekopieën naar andere media worden er nog steeds bestanden " "aangemaakt op de harde schijf, waarna ze verplaatst worden naar de andere " "media. Het inschakelen van deze optie zal de tar-bestanden op de harde " "schijf na de reservekopie verwijderen." #: standalone/drakbackup:163 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "Sommige protocollen, zoals rsync, kunnen aan de kant van de server worden " "geconfigureerd. In plaats van een map-pad, zou u de 'module'-naam gebruiken " "voor het service-pad." #: standalone/drakbackup:164 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "'Aangepast' laat u uw eigen dag en tijd aangeven. De andere opties gebruiken " "run-stukjes in /etc/crontab." #: standalone/drakbackup:396 #, c-format msgid "No media selected for cron operation." msgstr "Geen media geselecteerd voor cron-operatie." #: standalone/drakbackup:400 #, c-format msgid "No interval selected for cron operation." msgstr "Geen interval geselecteerd voor cron-operatie." #: standalone/drakbackup:447 #, c-format msgid "Interval cron not available as non-root" msgstr "Interval-cron niet beschikbaar als niet-root" #: standalone/drakbackup:532 standalone/logdrake:467 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "\"%s\" is noch een geldig e-mailadres, noch een bestaande gebruiker!" #: standalone/drakbackup:536 standalone/logdrake:472 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:545 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "Geldige gebruikerlijst veranderd, configuratiebestand wegschrijven..." #: standalone/drakbackup:547 #, c-format msgid "Old user list:\n" msgstr "Oude gebruikerslijst:\n" #: standalone/drakbackup:549 #, c-format msgid "New user list:\n" msgstr "Nieuwe gebruikerslijst:\n" #: standalone/drakbackup:594 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackup rapport \n" #: standalone/drakbackup:595 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Rapport van DrakBackup-voorziening\n" #: standalone/drakbackup:601 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup Rapport Details\n" "\n" "\n" #: standalone/drakbackup:625 standalone/drakbackup:696 #: standalone/drakbackup:752 #, c-format msgid "Total progress" msgstr "Totale voortgang" #: standalone/drakbackup:678 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s bestaat al, verwijderen?\n" "\n" "Indien u dit proces reeds doorlopen hebt is het\n" "waarschijnlijk nodig om de ingang uit authorized_keys\n" " op de server te verwijderen." #: standalone/drakbackup:687 #, c-format msgid "This may take a moment to generate the keys." msgstr "Het kan enige tijd duren om de sleutels te genereren." #: standalone/drakbackup:694 #, c-format msgid "Cannot spawn %s." msgstr "Kan %s niet starten." #: standalone/drakbackup:711 #, c-format msgid "No password prompt on %s at port %s" msgstr "Geen wachtwoord-aanvraag bij %s op poort %s" #: standalone/drakbackup:712 #, c-format msgid "Bad password on %s" msgstr "Onjuist wachtwoord op %s" #: standalone/drakbackup:713 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Toegang geweigerd bij het overdragen van %s naar %s" #: standalone/drakbackup:714 #, c-format msgid "Can't find %s on %s" msgstr "Kan %s op %s niet vinden" #: standalone/drakbackup:718 #, c-format msgid "%s not responding" msgstr "%s geeft geen antwoord" #: standalone/drakbackup:722 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Overdracht geslaagd\n" "U wilt wellicht nagaan of u zich op de server kunt aanmelden met:\n" "\n" "ssh -i %s %s@%s\n" "\n" "zonder om een wachtwoord gevraagd te worden." #: standalone/drakbackup:766 #, c-format msgid "WebDAV remote site already in sync!" msgstr "WebDAV-site op afstand loopt al synchroon!" #: standalone/drakbackup:770 #, c-format msgid "WebDAV transfer failed!" msgstr "WebDAV-overdracht mislukt!" #: standalone/drakbackup:791 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Geen CD-R/DVD-R in station!" #: standalone/drakbackup:795 #, c-format msgid "Does not appear to be recordable media!" msgstr "Dit lijkt geen opneembare media te zijn!" #: standalone/drakbackup:799 #, c-format msgid "Not erasable media!" msgstr "Geen wisbare media!" #: standalone/drakbackup:840 #, c-format msgid "This may take a moment to erase the media." msgstr "Het kan enige tijd duren voordat de media gewist is." #: standalone/drakbackup:898 #, c-format msgid "Permission problem accessing CD." msgstr "Rechten-probleem bij benaderen CD." #: standalone/drakbackup:925 #, c-format msgid "No tape in %s!" msgstr "Geen tape in %s!" #: standalone/drakbackup:1025 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" "Quota voor reserviekopie overschreden!\n" "%d MB gebruikt vs. %d MB gereserveerd." #: standalone/drakbackup:1044 standalone/drakbackup:1077 #, c-format msgid "Backup system files..." msgstr "Reservekopie maken van systeembestanden..." #: standalone/drakbackup:1078 standalone/drakbackup:1119 #, c-format msgid "Hard Disk Backup files..." msgstr "Harde schijf reservekopie..." #: standalone/drakbackup:1118 #, c-format msgid "Backup User files..." msgstr "Reservekopie gebruikersbestanden..." #: standalone/drakbackup:1153 #, c-format msgid "Backup Other files..." msgstr "Reservekopie andere bestanden..." #: standalone/drakbackup:1154 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Voortgang reservekopie harde schijf..." #: standalone/drakbackup:1159 #, c-format msgid "No changes to backup!" msgstr "Geen veranderingen om een reservekopie van te maken!" #: standalone/drakbackup:1177 standalone/drakbackup:1201 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Drakbackup-activiteiten via %s:\n" "\n" #: standalone/drakbackup:1186 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " FTP verbindingsprobleem: het was niet mogelijk uw reservekopie via FTP te " "versturen.\n" #: standalone/drakbackup:1187 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Er is een fout opgetreden tijdens de bestandsoverdracht via FTP. " "Corrigeert u alstublieft uw FTP-configuratie." #: standalone/drakbackup:1189 #, c-format msgid "file list sent by FTP: %s\n" msgstr "bestandslijst via FTP verzonden: %s\n" #: standalone/drakbackup:1206 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Drakbackup-activiteiten via CD:\n" "\n" #: standalone/drakbackup:1211 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Drakbackup-activiteiten via tape:\n" "\n" #: standalone/drakbackup:1220 #, fuzzy, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" "Er trad een fout op tijdens \"sendmail\"\n" " Uw melding is niet verstuurd.\n" " Gelieve sendmail te configureren." #: standalone/drakbackup:1221 #, c-format msgid " Error while sending mail. \n" msgstr "Fout tijdens versturen post.\n" #: standalone/drakbackup:1249 #, c-format msgid "Can't create catalog!" msgstr "Kan catalogus niet creëren!" #: standalone/drakbackup:1455 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Selecteer de bestanden of mappen en klik op 'OK'" #: standalone/drakbackup:1484 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Gelieve alle opties te selecteren die u nodig heeft.\n" #: standalone/drakbackup:1485 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Deze opties kunnen een reservekopie maken van alle bestanden in uw /etc " "map.\n" #: standalone/drakbackup:1486 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Reservekopie maken van uw systeembestanden. ( /etc map )" #: standalone/drakbackup:1487 standalone/drakbackup:1551 #: standalone/drakbackup:1617 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" "Incrementele/differentiële reservekopieën gebruiken (geen oude " "reservekopieën vervangen)" #: standalone/drakbackup:1489 standalone/drakbackup:1553 #: standalone/drakbackup:1619 #, c-format msgid "Use Incremental Backups" msgstr "Incrementele reservekopieën maken" #: standalone/drakbackup:1489 standalone/drakbackup:1553 #: standalone/drakbackup:1619 #, c-format msgid "Use Differential Backups" msgstr "Differentiële reservekopieën maken" #: standalone/drakbackup:1491 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Essentiële bestanden niet opnemen (passwd, group, fstab)" #: standalone/drakbackup:1492 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "Met deze optie kunt u iedere versie van uw /etc herstellen." #: standalone/drakbackup:1523 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" "Gelieve alle gebruikers te selecteren die u in uw reservekopie wilt opnemen." #: standalone/drakbackup:1550 #, c-format msgid "Do not include the browser cache" msgstr "Browser-cache niet opnemen" #: standalone/drakbackup:1605 standalone/drakfont:656 #, c-format msgid "Remove Selected" msgstr "Verwijder geselecteerden" #: standalone/drakbackup:1668 #, c-format msgid "Users" msgstr "Gebruikers" #: standalone/drakbackup:1688 #, c-format msgid "Use network connection to backup" msgstr "Netwerkverbinding gebruiken voor reservekopie" #: standalone/drakbackup:1690 #, c-format msgid "Net Method:" msgstr "Net-methode:" #: standalone/drakbackup:1694 #, c-format msgid "Use Expect for SSH" msgstr "Expect voor SSH gebruiken" #: standalone/drakbackup:1695 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "Reservesleutels voor SSH aanmaken/overzetten" #: standalone/drakbackup:1697 #, c-format msgid "Transfer Now" msgstr "Nu overzetten" #: standalone/drakbackup:1699 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "Andere (niet-drakbackup) sleutels zijn reeds aanwezig" #: standalone/drakbackup:1702 #, c-format msgid "Host name or IP." msgstr "Hostnaam of IP." #: standalone/drakbackup:1707 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "De map (of module) op deze computer om de reservekopie in op te slaan." #: standalone/drakbackup:1712 #, c-format msgid "Login name" msgstr "Aanmeldnaam" #: standalone/drakbackup:1719 #, c-format msgid "Remember this password" msgstr "Onthoud dit wachtwoord" #: standalone/drakbackup:1735 #, c-format msgid "Need hostname, username and password!" msgstr "Hostnaam, gebruikersnaam en wachtwoord benodigd!" #: standalone/drakbackup:1833 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Gebruik CD/DVD-ROM voor reservekopie" #: standalone/drakbackup:1836 #, c-format msgid "Choose your CD/DVD device" msgstr "Kies uw CD/DVD-apparaat" #: standalone/drakbackup:1841 #, c-format msgid "Choose your CD/DVD media size" msgstr "Kies uw CD/DVD-mediagrootte" #: standalone/drakbackup:1848 #, c-format msgid "Multisession CD" msgstr "Multisessie-CD" #: standalone/drakbackup:1850 #, c-format msgid "CDRW media" msgstr "CDRW-media" # Opdracht of knop? #: standalone/drakbackup:1856 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Wissen van uw RW-media (eerste sessie)" #: standalone/drakbackup:1857 #, c-format msgid " Erase Now " msgstr " Nu wissen" #: standalone/drakbackup:1863 #, c-format msgid "DVD+RW media" msgstr "DVD+RW-media" #: standalone/drakbackup:1865 #, c-format msgid "DVD-R media" msgstr "DVD-R-media" #: standalone/drakbackup:1867 #, c-format msgid "DVDRAM device" msgstr "DVDRAM apparaat" #: standalone/drakbackup:1898 #, c-format msgid "No CD device defined!" msgstr "Geen CD-apparaat gedefiniëerd!" #: standalone/drakbackup:1945 #, c-format msgid "Use tape to backup" msgstr "Tape gebruiken voor backup" #: standalone/drakbackup:1948 #, c-format msgid "Device name to use for backup" msgstr "Apparaatnaam om voor de reservekopie te gebruiken" #: standalone/drakbackup:1954 #, c-format msgid "Don't rewind tape after backup" msgstr "Tape niet terugspoelen na maken van reservekopie" #: standalone/drakbackup:1960 #, c-format msgid "Erase tape before backup" msgstr "Tape wissen voor reservekopie" #: standalone/drakbackup:1966 #, c-format msgid "Eject tape after the backup" msgstr "Tape na reservekopie uitwerpen" #: standalone/drakbackup:2033 #, c-format msgid "Enter the directory to save to:" msgstr "Voer de map voor opslaan in:" #: standalone/drakbackup:2037 #, c-format msgid "Directory to save to" msgstr "Map om naar op te slaan" #: standalone/drakbackup:2042 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Maximumruimte die\n" " Drakbackup mag gebruiken (MB)" #: standalone/drakbackup:2106 #, c-format msgid "CD-R / DVD-R" msgstr "CD-ROM / DVD-ROM" #: standalone/drakbackup:2111 #, c-format msgid "HardDrive / NFS" msgstr "Harde schijf / NFS" #: standalone/drakbackup:2127 standalone/drakbackup:2132 #: standalone/drakbackup:2137 #, c-format msgid "hourly" msgstr "ieder uur" #: standalone/drakbackup:2128 standalone/drakbackup:2133 #: standalone/drakbackup:2137 #, c-format msgid "daily" msgstr "dagelijks" #: standalone/drakbackup:2129 standalone/drakbackup:2134 #: standalone/drakbackup:2137 #, c-format msgid "weekly" msgstr "wekelijks" #: standalone/drakbackup:2130 standalone/drakbackup:2135 #: standalone/drakbackup:2137 #, c-format msgid "monthly" msgstr "maandelijks" #: standalone/drakbackup:2131 standalone/drakbackup:2136 #: standalone/drakbackup:2137 #, c-format msgid "custom" msgstr "aangepast" #: standalone/drakbackup:2142 #, c-format msgid "January" msgstr "Januari" #: standalone/drakbackup:2142 #, c-format msgid "February" msgstr "Februari" #: standalone/drakbackup:2142 #, c-format msgid "March" msgstr "Maart" #: standalone/drakbackup:2143 #, c-format msgid "April" msgstr "April" #: standalone/drakbackup:2143 #, c-format msgid "May" msgstr "Mei" #: standalone/drakbackup:2143 #, c-format msgid "June" msgstr "Juni" #: standalone/drakbackup:2143 #, c-format msgid "July" msgstr "Juli" #: standalone/drakbackup:2143 #, c-format msgid "August" msgstr "Augustus" #: standalone/drakbackup:2143 #, c-format msgid "September" msgstr "September" #: standalone/drakbackup:2144 #, c-format msgid "October" msgstr "Oktober" #: standalone/drakbackup:2144 #, c-format msgid "November" msgstr "November" #: standalone/drakbackup:2144 #, c-format msgid "December" msgstr "December" #: standalone/drakbackup:2149 #, c-format msgid "Sunday" msgstr "Zondag" #: standalone/drakbackup:2149 #, c-format msgid "Monday" msgstr "Maandag" #: standalone/drakbackup:2149 #, c-format msgid "Tuesday" msgstr "Dinsdag" #: standalone/drakbackup:2150 #, c-format msgid "Wednesday" msgstr "Woensdag" #: standalone/drakbackup:2150 #, c-format msgid "Thursday" msgstr "Donderdag" #: standalone/drakbackup:2150 #, c-format msgid "Friday" msgstr "Vrijdag" #: standalone/drakbackup:2150 #, c-format msgid "Saturday" msgstr "Zaterdag" #: standalone/drakbackup:2185 #, c-format msgid "Use daemon" msgstr "Gebruik daemon" #: standalone/drakbackup:2190 #, c-format msgid "Please choose the time interval between each backup" msgstr "Kies het gewenste tijdsinterval tussen elke reservekopie" #: standalone/drakbackup:2196 #, c-format msgid "Custom setup/crontab entry:" msgstr "Aangepaste instelling/crontab-regel:" #: standalone/drakbackup:2201 #, c-format msgid "Minute" msgstr "Minuut" #: standalone/drakbackup:2205 #, c-format msgid "Hour" msgstr "Uur" #: standalone/drakbackup:2209 #, c-format msgid "Day" msgstr "Dag" #: standalone/drakbackup:2213 #, c-format msgid "Month" msgstr "Maand" #: standalone/drakbackup:2217 #, c-format msgid "Weekday" msgstr "Weekdag" #: standalone/drakbackup:2223 #, c-format msgid "Please choose the media for backup." msgstr "Kies de media voor de reservekopie." #: standalone/drakbackup:2230 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Let u op dat de cron-daemon aanstaat in uw 'diensten'." #: standalone/drakbackup:2231 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "Merk op dat momenteel alle 'net'-media ook van de harde schijf gebruikmaken." #: standalone/drakbackup:2281 #, c-format msgid "Please choose the compression type" msgstr "Kies het type compressie" #: standalone/drakbackup:2285 #, c-format msgid "Use .backupignore files" msgstr ".backupignore bestanden gebruiken" #: standalone/drakbackup:2287 #, c-format msgid "Send mail report after each backup to:" msgstr "Verstuur e-mailrapport na elke reservekopie naar:" #: standalone/drakbackup:2293 #, c-format msgid "SMTP server for mail:" msgstr "SMTP-server voor mail:" #: standalone/drakbackup:2298 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "Tar-bestanden op harde schijf wissen na reservekopie naar andere media." #: standalone/drakbackup:2338 #, c-format msgid "What" msgstr "Wat" #: standalone/drakbackup:2343 #, c-format msgid "Where" msgstr "Waar" #: standalone/drakbackup:2348 #, c-format msgid "When" msgstr "Wanneer" #: standalone/drakbackup:2353 #, c-format msgid "More Options" msgstr "Meer opties" #: standalone/drakbackup:2366 #, c-format msgid "Backup destination not configured..." msgstr "Reservekopie-doel niet geconfigureerd..." #: standalone/drakbackup:2385 standalone/drakbackup:4413 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup configuratie" #: standalone/drakbackup:2402 #, c-format msgid "Please choose where you want to backup" msgstr "Bepaal waar u de reservekopie wilt maken" #: standalone/drakbackup:2404 #, fuzzy, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" "Tar-bestanden op harde schijf wissen na reservekopie naar andere media." #: standalone/drakbackup:2412 #, c-format msgid "Across Network" msgstr "over netwerk" #: standalone/drakbackup:2420 #, c-format msgid "On CD-R" msgstr "op CDROM" #: standalone/drakbackup:2428 #, c-format msgid "On Tape Device" msgstr "op Tape-apparaat" #: standalone/drakbackup:2468 #, c-format msgid "Backup Users" msgstr "Reservekopie Gebruikers" #: standalone/drakbackup:2469 #, c-format msgid " (Default is all users)" msgstr " (Standaard is alle gebruikers)" #: standalone/drakbackup:2481 #, c-format msgid "Please choose what you want to backup" msgstr "Kies waar u een reservekopie van wilt maken" #: standalone/drakbackup:2482 #, c-format msgid "Backup System" msgstr "Reservekopie-systeem" #: standalone/drakbackup:2484 #, c-format msgid "Select user manually" msgstr "Handmatig gebruiker selecteren" #: standalone/drakbackup:2513 #, c-format msgid "Please select data to backup..." msgstr "Selecteer de gegevens waarvan u een reservekopie wilt maken..." #: standalone/drakbackup:2585 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Reservekopie-bronnen: \n" #: standalone/drakbackup:2586 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Systeembestanden:\n" #: standalone/drakbackup:2588 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Gebruikersbestanden:\n" #: standalone/drakbackup:2590 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Overige bestanden:\n" #: standalone/drakbackup:2592 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Pad voor opslaan op harde schijf: %s\n" #: standalone/drakbackup:2593 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tSchijfgebruik begrenzen tot %s MB\n" #: standalone/drakbackup:2596 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Tar-bestanden op harde schijf wissen na reservekopie.\n" #: standalone/drakbackup:2600 #, c-format msgid "NO" msgstr "NEE" #: standalone/drakbackup:2601 #, c-format msgid "YES" msgstr "JA" #: standalone/drakbackup:2602 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Naar CD branden" #: standalone/drakbackup:2603 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2604 #, c-format msgid " on device: %s" msgstr " op apparaat: %s" #: standalone/drakbackup:2605 #, c-format msgid " (multi-session)" msgstr " (multi-sessie)" #: standalone/drakbackup:2606 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Naar tape opslaan op apparaat: %s" #: standalone/drakbackup:2607 #, c-format msgid "\t\tErase=%s" msgstr "\t\tWissen=%s" #: standalone/drakbackup:2610 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Opslaan via %s op host: %s\n" #: standalone/drakbackup:2611 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t gebruikersnaam: %s\n" "\t\t op pad: %s \n" #: standalone/drakbackup:2612 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Opties:\n" #: standalone/drakbackup:2613 #, c-format msgid "\tDo not include System Files\n" msgstr "\tSysteembestanden niet opnemen\n" #: standalone/drakbackup:2615 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tReservekopieën gebruiken tar en bzip2\n" #: standalone/drakbackup:2616 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tReservekopieën gebruiken tar en gzip\n" #: standalone/drakbackup:2617 #, c-format msgid "\tBackups use tar only\n" msgstr "\tReservekopieën gebruiken slechts tar\n" #: standalone/drakbackup:2619 #, c-format msgid "\tUse .backupignore files\n" msgstr "\t.backupignore-bestanden gebruiken\n" #: standalone/drakbackup:2620 #, c-format msgid "\tSend mail to %s\n" msgstr "\tE-mail versturen naar %s\n" #: standalone/drakbackup:2621 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\tMet gebruik van SMTP-server %s\n" # check if this is the right translation, unclear! -Reinout #: standalone/drakbackup:2623 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Voorziening, %s via: \n" #: standalone/drakbackup:2624 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Harde schijf.\n" #: standalone/drakbackup:2625 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: standalone/drakbackup:2626 #, c-format msgid "\t-Tape \n" msgstr "\t-Tape \n" #: standalone/drakbackup:2627 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Netwerk over FTP.\n" #: standalone/drakbackup:2628 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Netwerk over SSH.\n" #: standalone/drakbackup:2629 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Netwerk over rsync.\n" #: standalone/drakbackup:2630 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Netwerk over webdav.\n" #: standalone/drakbackup:2632 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Geen configuratie, klik alstublieft op Wizard of Geavanceerd\n" #: standalone/drakbackup:2637 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Lijst van te herstellen gegevens:\n" "\n" #: standalone/drakbackup:2639 #, c-format msgid "- Restore System Files.\n" msgstr "- Systeembestanden herstellen.\n" #: standalone/drakbackup:2641 standalone/drakbackup:2651 #, c-format msgid " - from date: %s %s\n" msgstr " - vanaf datum: %s %s\n" #: standalone/drakbackup:2644 #, c-format msgid "- Restore User Files: \n" msgstr "- Gebruikersbestanden herstellen:\n" #: standalone/drakbackup:2649 #, c-format msgid "- Restore Other Files: \n" msgstr "- Overige bestanden herstellen: \n" #: standalone/drakbackup:2830 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Lijst van beschadigde gegevens:\n" "\n" #: standalone/drakbackup:2832 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Gelieve het de volgende keer te deselecteren of te verwijderen" #: standalone/drakbackup:2842 #, c-format msgid "Backup files are corrupted" msgstr "Reservekopie bestanden zijn beschadigd" #: standalone/drakbackup:2863 #, c-format msgid " All of your selected data have been " msgstr " Al uw geselecteerde gegevens zijn " #: standalone/drakbackup:2864 #, c-format msgid " Successfuly Restored on %s " msgstr " Succesvol hersteld op %s " #: standalone/drakbackup:2987 #, c-format msgid " Restore Configuration " msgstr " Configuratie herstellen " #: standalone/drakbackup:3015 #, c-format msgid "OK to restore the other files." msgstr "OK om de overige bestanden te herstellen" #: standalone/drakbackup:3031 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Te herstellen gebruikerslijst (alleen de meest recente datum per gebruiker " "is van belang)" #: standalone/drakbackup:3098 #, c-format msgid "Please choose the date to restore:" msgstr "Kies de datum om te herstellen:" #: standalone/drakbackup:3135 #, c-format msgid "Restore from Hard Disk." msgstr "Herstellen van harde schijf" #: standalone/drakbackup:3137 #, c-format msgid "Enter the directory where backups are stored" msgstr "Voer de map in waar reservekopieën opgeslagen zijn" #: standalone/drakbackup:3141 #, c-format msgid "Directory with backups" msgstr "Map met reservekopieën" #: standalone/drakbackup:3194 #, c-format msgid "Select another media to restore from" msgstr "Selecteer andere media om vanaf te herstellen" #: standalone/drakbackup:3196 #, c-format msgid "Other Media" msgstr "Andere media" #: standalone/drakbackup:3201 #, c-format msgid "Restore system" msgstr "Systeem herstellen" #: standalone/drakbackup:3202 #, c-format msgid "Restore Users" msgstr "Gebruikers herstellen" #: standalone/drakbackup:3203 #, c-format msgid "Restore Other" msgstr "Overige herstellen" #: standalone/drakbackup:3205 #, c-format msgid "Select path to restore (instead of /)" msgstr "selecteer te herstellen pad (in plaats van / )" #: standalone/drakbackup:3209 standalone/drakbackup:3490 #, c-format msgid "Path To Restore To" msgstr "Pad om naartoe te herstellen" #: standalone/drakbackup:3212 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Voer nieuwe backup uit alvorens te herstellen (alleen voor incrementele " "reservekopieën)" #: standalone/drakbackup:3214 #, c-format msgid "Remove user directories before restore." msgstr "Verwijder gebruikersmappen alvorens te herstellen" #: standalone/drakbackup:3298 #, fuzzy, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "Te zoeken bestandsnaamtekst:" # Wellicht 'doorzoeken'? #: standalone/drakbackup:3301 #, c-format msgid "Search Backups" msgstr "Reservekopieën zoeken" #: standalone/drakbackup:3320 #, c-format msgid "No matches found..." msgstr "Geen overeenkomsten gevonden..." #: standalone/drakbackup:3324 #, c-format msgid "Restore Selected" msgstr "Geselecteerde bestanden herstellen" #: standalone/drakbackup:3458 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3464 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "Geselecteerd catalogus-item herstellen" #: standalone/drakbackup:3473 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Geselecteerde bestanden\n" "herstellen" #: standalone/drakbackup:3550 #, c-format msgid "Backup files not found at %s." msgstr "Reservekopie-bestanden niet op %s gevonden." #: standalone/drakbackup:3563 #, c-format msgid "Restore From CD" msgstr "Herstellen van CD" #: standalone/drakbackup:3563 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Plaats de CD met volume label %s\n" " in het CD-ROM-station onder koppelpunt /mnt/cdrom" #: standalone/drakbackup:3565 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "Incorrect CD-label. Het label van deze schijf is %s." #: standalone/drakbackup:3575 #, c-format msgid "Restore From Tape" msgstr "Herstellen van tape" #: standalone/drakbackup:3575 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Plaats de tape met volume label %s\n" " in tape-apparaat %s" #: standalone/drakbackup:3577 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Incorrect tape-label. Het label van deze tape is %s." #: standalone/drakbackup:3588 #, c-format msgid "Restore Via Network" msgstr "Herstellen via netwerk" #: standalone/drakbackup:3588 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Herstellen via netwerkprotocol: %s" #: standalone/drakbackup:3589 #, c-format msgid "Host Name" msgstr "Hostnaam" #: standalone/drakbackup:3590 #, c-format msgid "Host Path or Module" msgstr "Host-pad of module" #: standalone/drakbackup:3597 #, c-format msgid "Password required" msgstr "Wachtwoord vereist" #: standalone/drakbackup:3603 #, c-format msgid "Username required" msgstr "Gebruikersnaam vereist" #: standalone/drakbackup:3606 #, c-format msgid "Hostname required" msgstr "Hostnaam vereist" #: standalone/drakbackup:3611 #, c-format msgid "Path or Module required" msgstr "Pad of module vereist" #: standalone/drakbackup:3624 #, c-format msgid "Files Restored..." msgstr "Bestanden teruggezet..." #: standalone/drakbackup:3627 #, c-format msgid "Restore Failed..." msgstr "Herstellen mislukt..." #: standalone/drakbackup:3737 standalone/drakbackup:3754 #, c-format msgid "%s not retrieved..." msgstr "%s niet opgehaald..." #: standalone/drakbackup:3880 standalone/drakbackup:3953 #, c-format msgid "Search for files to restore" msgstr "Zoeken naar te herstellen bestanden" #: standalone/drakbackup:3885 #, c-format msgid "Restore all backups" msgstr "Alle reservekopieën herstellen" #: standalone/drakbackup:3894 #, c-format msgid "Custom Restore" msgstr "Aangepast herstellen" #: standalone/drakbackup:3899 standalone/drakbackup:3949 #, c-format msgid "Restore From Catalog" msgstr "Herstellen vanuit catalogus" #: standalone/drakbackup:3921 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Kan de te herstellen reservekopieën niet vinden...\n" #: standalone/drakbackup:3922 #, c-format msgid "Verify that %s is the correct path" msgstr "Ga na dat %s het correcte pad is" #: standalone/drakbackup:3923 #, c-format msgid " and the CD is in the drive" msgstr " en de CD bevindt zich niet in de speler" #: standalone/drakbackup:3925 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" "Reservekopieën op onkoppelbare media - gebruik Catalog om te herstellen" #: standalone/drakbackup:3941 #, c-format msgid "CD in place - continue." msgstr "CD geplaatst - doorgaan." #: standalone/drakbackup:3946 #, c-format msgid "Browse to new restore repository." msgstr "Bladeren naar nieuwe herstellocatie." #: standalone/drakbackup:3947 #, c-format msgid "Directory To Restore From" msgstr "Map om vandaan te herstellen" #: standalone/drakbackup:3986 #, c-format msgid "Restore Progress" msgstr "Herstelvoortgang" #: standalone/drakbackup:4016 standalone/drakbackup:4123 #: standalone/logdrake:174 #, c-format msgid "Save" msgstr "Opslaan" #: standalone/drakbackup:4099 #, c-format msgid "Build Backup" msgstr "Reservekopie maken" #: standalone/drakbackup:4147 standalone/drakbackup:4512 #, c-format msgid "Restore" msgstr "Herstellen" #: standalone/drakbackup:4277 #, c-format msgid "The following packages need to be installed:\n" msgstr "De volgende pakketten dienen geïnstalleerd te worden:\n" #: standalone/drakbackup:4304 #, c-format msgid "Please select data to restore..." msgstr "Selecteer de gegevens om te herstellen" #: standalone/drakbackup:4344 #, c-format msgid "Backup system files" msgstr "Reservekopie maken van systeembestanden" #: standalone/drakbackup:4347 #, c-format msgid "Backup user files" msgstr "Reservekopie maken van gebruikersbestanden" #: standalone/drakbackup:4350 #, c-format msgid "Backup other files" msgstr "Reservekopie maken van overige bestanden" #: standalone/drakbackup:4353 standalone/drakbackup:4389 #, c-format msgid "Total Progress" msgstr "Totale voortgang" #: standalone/drakbackup:4381 #, c-format msgid "Sending files by FTP" msgstr "Bezig met versturen van bestanden over FTP" #: standalone/drakbackup:4384 #, c-format msgid "Sending files..." msgstr "Bezig met versturen van bestanden..." #: standalone/drakbackup:4455 #, c-format msgid "Backup Now from configuration file" msgstr "Nu reservekopie maken vanaf configuratiebestand" #: standalone/drakbackup:4460 #, c-format msgid "View Backup Configuration." msgstr "Backup-configuratie bekijken" #: standalone/drakbackup:4486 #, c-format msgid "Wizard Configuration" msgstr "Configuratie met hulp" #: standalone/drakbackup:4491 #, c-format msgid "Advanced Configuration" msgstr "Geavanceerde configuratie" #: standalone/drakbackup:4496 #, c-format msgid "View Configuration" msgstr "Configuratie bekijken" #: standalone/drakbackup:4500 #, c-format msgid "View Last Log" msgstr "Laatste logboek bekijken" #: standalone/drakbackup:4505 #, c-format msgid "Backup Now" msgstr "Nu reservekopie maken" #: standalone/drakbackup:4509 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Kan geen instellingen-bestand vinden \n" "klikt u op Wizard of Geavanceerd." #: standalone/drakbackup:4530 standalone/drakbackup:4533 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:57 #, c-format msgid "Graphical boot theme selection" msgstr "Grafische selectie van opstartthema" #: standalone/drakboot:57 #, c-format msgid "System mode" msgstr "Systeemmodus" #: standalone/drakboot:67 standalone/drakfloppy:46 standalone/harddrake2:97 #: standalone/harddrake2:98 standalone/logdrake:71 standalone/printerdrake:150 #: standalone/printerdrake:151 standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "/_Bestand" #: standalone/drakboot:68 standalone/drakfloppy:47 standalone/logdrake:77 #, c-format msgid "/File/_Quit" msgstr "/Bestand/_Afsluiten" #: standalone/drakboot:68 standalone/drakfloppy:47 standalone/harddrake2:98 #: standalone/logdrake:77 standalone/printerdrake:152 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:119 #, c-format msgid "Install themes" msgstr "Thema's installeren" #: standalone/drakboot:120 #, c-format msgid "Create new theme" msgstr "Nieuw thema creëren" #: standalone/drakboot:134 #, c-format msgid "Use graphical boot" msgstr "Grafisch opstarten" #: standalone/drakboot:139 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" "Uw systeem-opstartlader staat niet in framebuffer-modus. Om grafisch " "opstarten te activeren, selecteert u een grafische videomodus vanuit " "het configuratieprogramma voor de opstartlader." #: standalone/drakboot:146 #, c-format msgid "Theme" msgstr "Thema" #: standalone/drakboot:149 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Thema weergeven\n" "onder keuzemenu" #: standalone/drakboot:158 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Open het X-Window systeem bij opstarten" #: standalone/drakboot:166 #, c-format msgid "No, I don't want autologin" msgstr "Nee, ik wil niet automatisch aanmelden" #: standalone/drakboot:167 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ja, ik wil automatisch aanmelden met deze (gebruiker, werkomgeving)" #: standalone/drakboot:173 #, c-format msgid "Default user" msgstr "Standaard gebruiker" #: standalone/drakboot:174 #, c-format msgid "Default desktop" msgstr "Standaard werkomgeving" #: standalone/drakboot:238 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "De installatie van %s is niet gelukt. De volgende fout werd gevonden:" #: standalone/drakbug:40 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" "Om een foutrapport te versturen, klikt u op de knop 'rapporteren'.\n" "Hierdoor wordt een browservenster geopend op '%s'\n" "waar u een formulier vindt om in te vullen. De bovenstaande informatie zal " "worden \n" "verstuurd naar die server." #: standalone/drakbug:48 #, c-format msgid "Mandrake Bug Report Tool" msgstr "Mandrake foutrapportage-programma" #: standalone/drakbug:53 #, c-format msgid "Mandrake Control Center" msgstr "Mandrake Configuratiecentrum" #: standalone/drakbug:55 #, c-format msgid "Synchronization tool" msgstr "Synchronisatie-hulpprogramma" #: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204 #: standalone/drakbug:206 standalone/drakbug:210 #, c-format msgid "Standalone Tools" msgstr "Zelfstandige hulpprogramma's" #: standalone/drakbug:57 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:58 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: standalone/drakbug:59 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:60 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:61 #, c-format msgid "Remote Control" msgstr "Beheer op afstand" #: standalone/drakbug:62 #, c-format msgid "Software Manager" msgstr "Softwarebeheer" #: standalone/drakbug:63 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:64 #, c-format msgid "Windows Migration tool" msgstr "Windows-migratiegereedschap" #: standalone/drakbug:65 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:66 #, c-format msgid "Configuration Wizards" msgstr "Configuratie-wizards" #: standalone/drakbug:84 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" "Om een foutrapport te versturen, klikt u op de knop 'rapporteren'.\n" "Hierdoor wordt een browservenster geopend op 'Anthill'\n" "waar u de bovenstaande informatie als foutrapport kunt versturen.\n" " " #: standalone/drakbug:102 #, c-format msgid "Application:" msgstr "Toepassing:" #: standalone/drakbug:103 standalone/drakbug:115 #, c-format msgid "Package: " msgstr "Pakket: " #: standalone/drakbug:104 #, c-format msgid "Kernel:" msgstr "Kernel:" #: standalone/drakbug:105 standalone/drakbug:116 #, c-format msgid "Release: " msgstr "Uitgave: " #: standalone/drakbug:110 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" "Naam van de toepassing\n" "of volledig pad:" #: standalone/drakbug:113 #, c-format msgid "Find Package" msgstr "Pakket zoeken" #: standalone/drakbug:117 #, c-format msgid "Summary: " msgstr "Overzicht: " #: standalone/drakbug:129 #, c-format msgid "YOUR TEXT HERE" msgstr "UW TEKST HIER" #: standalone/drakbug:132 #, c-format msgid "Bug Description/System Information" msgstr "Foutomschrijving/Systeeminformatie" #: standalone/drakbug:136 #, c-format msgid "Submit kernel version" msgstr "Kernelversie verzenden" #: standalone/drakbug:137 #, c-format msgid "Submit cpuinfo" msgstr "cpuinfo verzenden" #: standalone/drakbug:138 #, c-format msgid "Submit lspci" msgstr "lspci verzenden" #: standalone/drakbug:159 #, c-format msgid "Report" msgstr "Rapporteren" #: standalone/drakbug:219 #, c-format msgid "Not installed" msgstr "Niet geïnstalleerd" #: standalone/drakbug:231 #, c-format msgid "Package not installed" msgstr "Pakket niet geïnstalleerd" #: standalone/drakbug:248 #, c-format msgid "NOT FOUND" msgstr "NIET GEVONDEN" #: standalone/drakbug:259 #, c-format msgid "connecting to %s ..." msgstr "verbinden met %s..." #: standalone/drakbug:267 #, c-format msgid "No browser available! Please install one" msgstr "Geen bladerprogramma beschikbaar! Installeert u er alstublieft één." #: standalone/drakbug:286 #, c-format msgid "Please enter a package name." msgstr "Geef een pakketnaam" #: standalone/drakbug:292 #, c-format msgid "Please enter summary text." msgstr "Voer een samenvatting in." #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:36 #, c-format msgid "Change Time Zone" msgstr "Tijdzone wijzigen" #: standalone/drakclock:42 #, c-format msgid "Timezone - DrakClock" msgstr "Tijdzone - DrakClock" #: standalone/drakclock:44 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:44 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Is uw computerklok ingesteld op GMT?" #: standalone/drakclock:71 #, c-format msgid "Network Time Protocol" msgstr "Network Time Protocol" #: standalone/drakclock:73 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "Uw computer kan zijn klok synchroniseren\n" " met een tijdserver op afstand met behulp van NTP" #: standalone/drakclock:74 #, c-format msgid "Enable Network Time Protocol" msgstr "Network Time Protocol inschakelen" #: standalone/drakclock:82 #, c-format msgid "Server:" msgstr "Server:" #: standalone/drakclock:129 standalone/drakclock:141 #, c-format msgid "Reset" msgstr "Herinitialiseren" #: standalone/drakclock:204 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp ?" msgstr "" "Om het Network Time Protocol te\n" "kunnen inschakelen, is de installatie\n" "van het pakket 'ntp' nodig.\n" "\n" "Wilt u ntp installeren?" #: standalone/drakconnect:81 #, c-format msgid "Network configuration (%d adapters)" msgstr "Netwerk-configuratie (%d adapters)" #: standalone/drakconnect:92 standalone/drakconnect:728 #, c-format msgid "Gateway:" msgstr "Gateway:" #: standalone/drakconnect:92 standalone/drakconnect:728 #, c-format msgid "Interface:" msgstr "Interface:" #: standalone/drakconnect:96 standalone/net_monitor:105 #, c-format msgid "Wait please" msgstr "Even geduld" #: standalone/drakconnect:116 #, c-format msgid "Interface" msgstr "Interface" #: standalone/drakconnect:116 standalone/drakups:233 #, c-format msgid "Driver" msgstr "Stuurprogramma" #: standalone/drakconnect:116 #, c-format msgid "State" msgstr "Status" #: standalone/drakconnect:133 #, c-format msgid "Hostname: " msgstr "Computernaam:" #: standalone/drakconnect:135 #, c-format msgid "Configure hostname..." msgstr "Hostnaam configureren..." #: standalone/drakconnect:149 standalone/drakconnect:769 #, c-format msgid "LAN configuration" msgstr "LAN configuratie" #: standalone/drakconnect:154 #, c-format msgid "Configure Local Area Network..." msgstr "Local Area Network configureren..." #: standalone/drakconnect:162 standalone/drakconnect:237 #: standalone/drakconnect:241 #, c-format msgid "Apply" msgstr "Toepassen" #: standalone/drakconnect:197 #, c-format msgid "Manage connections" msgstr "Verbindingen beheren" #: standalone/drakconnect:263 standalone/drakconnect:272 #: standalone/drakconnect:292 standalone/drakconnect:298 #: standalone/drakconnect:308 standalone/drakconnect:309 #: standalone/drakconnect:576 #, c-format msgid "TCP/IP" msgstr "TCP/IP" #: standalone/drakconnect:263 standalone/drakconnect:272 #: standalone/drakconnect:292 standalone/drakconnect:444 #: standalone/drakconnect:448 standalone/drakconnect:576 #, c-format msgid "Account" msgstr "Account" #: standalone/drakconnect:298 standalone/drakconnect:370 #: standalone/drakconnect:371 standalone/drakconnect:576 #, c-format msgid "Wireless" msgstr "Draadloos" #: standalone/drakconnect:344 #, c-format msgid "DNS servers" msgstr "DNS-servers" #: standalone/drakconnect:351 #, c-format msgid "Search Domain" msgstr "Zoekdomein" #: standalone/drakconnect:359 #, c-format msgid "static" msgstr "statisch" #: standalone/drakconnect:359 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:482 #, fuzzy, c-format msgid "Flow control" msgstr "S" #: standalone/drakconnect:483 #, c-format msgid "Line termination" msgstr "Regeleinde" #: standalone/drakconnect:493 #, fuzzy, c-format msgid "Use lock file" msgstr "Selecteer bestand" #: standalone/drakconnect:496 #, c-format msgid "Modem timeout" msgstr "Modemwachttijd" #: standalone/drakconnect:500 #, c-format msgid "Wait for dialup tone before dialing" msgstr "Wachten op kiestoon voor inbellen" #: standalone/drakconnect:503 #, c-format msgid "Busy wait" msgstr "Wachten bij in gesprek" #: standalone/drakconnect:507 #, c-format msgid "Modem sound" msgstr "Modemgeluid" #: standalone/drakconnect:508 #, c-format msgid "Enable" msgstr "Inschakelen" #: standalone/drakconnect:508 #, c-format msgid "Disable" msgstr "Uitschakelen" #: standalone/drakconnect:558 standalone/harddrake2:58 #, c-format msgid "Media class" msgstr "Mediaklasse" #: standalone/drakconnect:559 standalone/drakfloppy:140 #, c-format msgid "Module name" msgstr "Modulenaam" #: standalone/drakconnect:560 #, c-format msgid "Mac Address" msgstr "Mac-adres" #: standalone/drakconnect:561 standalone/harddrake2:21 #, c-format msgid "Bus" msgstr "Bus" #: standalone/drakconnect:562 standalone/harddrake2:29 #, c-format msgid "Location on the bus" msgstr "Locatie op de bus" #: standalone/drakconnect:632 standalone/drakgw:248 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Er is geen ethernet netwerkadapter op uw systeem gevonden. Gelieve het " "hardware configuratieprogramma te draaien." #: standalone/drakconnect:638 #, c-format msgid "Remove a network interface" msgstr "Nnetwerkinterface verwijderen" #: standalone/drakconnect:642 #, c-format msgid "Select the network interface to remove:" msgstr "Kies de te verwijderen netwerkinterface:" #: standalone/drakconnect:656 #, fuzzy, c-format msgid "" "An error occured while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Een probleem deed zich voor bij het verwijderen van de netwerkinterface\n" "\"%s\":\n" "%s" #: standalone/drakconnect:658 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been succesfully deleted" msgstr "" "Gefeliciteerd, de netwerkinterface \"%s\" is succesvol verwijderd" #: standalone/drakconnect:675 #, c-format msgid "No Ip" msgstr "Geen IP" #: standalone/drakconnect:676 #, c-format msgid "No Mask" msgstr "Geen masker" # Neem aan dat hier 'in de lucht' wordt bedoeld, maar dat is te lang #: standalone/drakconnect:677 standalone/drakconnect:840 #, c-format msgid "up" msgstr "up" # 'Uit de lucht' #: standalone/drakconnect:677 standalone/drakconnect:840 #, c-format msgid "down" msgstr "down" #: standalone/drakconnect:718 standalone/net_monitor:415 #, c-format msgid "Connected" msgstr "Verbonden" #: standalone/drakconnect:718 standalone/net_monitor:415 #, c-format msgid "Not connected" msgstr "Niet verbonden" #: standalone/drakconnect:720 #, c-format msgid "Disconnect..." msgstr "Verbinding neerleggen..." #: standalone/drakconnect:720 #, c-format msgid "Connect..." msgstr "Verbinding maken..." #: standalone/drakconnect:749 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Waarschuwing: een andere internetverbinding is bespeurd, misschien gebruikt " "deze uw netwerk." #: standalone/drakconnect:765 #, c-format msgid "Deactivate now" msgstr "Nu deactiveren" #: standalone/drakconnect:765 #, c-format msgid "Activate now" msgstr "Nu activeren" #: standalone/drakconnect:773 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "U heeft helemaal geen geconfigureerde interface.\n" "Configureer deze eerst door op 'Configureer' te klikken" #: standalone/drakconnect:787 #, c-format msgid "LAN Configuration" msgstr "LAN Configuratie" #: standalone/drakconnect:799 #, c-format msgid "Adapter %s: %s" msgstr "Adapter %s: %s" #: standalone/drakconnect:808 #, c-format msgid "Boot Protocol" msgstr "Opstart-protocol" #: standalone/drakconnect:809 #, c-format msgid "Started on boot" msgstr "Aangezet bij het opstarten" #: standalone/drakconnect:845 #, fuzzy, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrake Control Center" msgstr "" "Deze interface is nog niet geconfigureerd.\n" "Start de configuratie-hulp in het hoofdscherm." #: standalone/drakconnect:900 #, fuzzy, c-format msgid "" "You don't have any configured Internet connection.\n" "Please run \"Internet access\" in control center." msgstr "" "U heeft helemaal geen internetverbinding.\n" "Creëer er eerst één door op 'Configureer' te klikken" #: standalone/drakconnect:908 #, c-format msgid "Internet connection configuration" msgstr "Internetverbinding configureren" #: standalone/drakconnect:926 #, fuzzy, c-format msgid "Third DNS server (optional)" msgstr "Eerste DNS-server (optioneel)" #: standalone/drakconnect:948 #, c-format msgid "Internet Connection Configuration" msgstr "Internetverbinding configureren" #: standalone/drakconnect:949 #, c-format msgid "Internet access" msgstr "Internet-toegang" #: standalone/drakconnect:951 standalone/net_monitor:87 #, c-format msgid "Connection type: " msgstr "Soort verbinding: " #: standalone/drakconnect:954 #, c-format msgid "Status:" msgstr "Status:" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "Kiezen van displaybeheer" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "X11 displaybeheer stelt u in staat zich grafisch aan te melden op uw\n" "computer waarop het X Window System actief is en ondersteunt het\n" "uitvoeren van verschillende gelijktijdige X-sessies op uw lokale computer." #: standalone/drakedm:77 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "De verandering is gemaakt, wilt u de dm-dienst herstarten?" #: standalone/drakfloppy:40 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:82 #, c-format msgid "Boot disk creation" msgstr "Creëren van opstartdiskette" #: standalone/drakfloppy:83 #, c-format msgid "General" msgstr "Algemeen" #: standalone/drakfloppy:86 #, c-format msgid "Device" msgstr "Apparaat" #: standalone/drakfloppy:92 #, c-format msgid "Kernel version" msgstr "Kernelversie" #: standalone/drakfloppy:107 #, c-format msgid "Preferences" msgstr "Voorkeuren" #: standalone/drakfloppy:121 #, c-format msgid "Advanced preferences" msgstr "Geavanceerde voorkeuren" #: standalone/drakfloppy:140 #, c-format msgid "Size" msgstr "Formaat" #: standalone/drakfloppy:143 #, fuzzy, c-format msgid "Mkinitrd optional arguments" msgstr "mkinitrd optionele argumenten" #: standalone/drakfloppy:145 #, c-format msgid "force" msgstr "forceren" #: standalone/drakfloppy:146 #, c-format msgid "omit raid modules" msgstr "laat raid modules weg" #: standalone/drakfloppy:147 #, c-format msgid "if needed" msgstr "als dit nodig is" #: standalone/drakfloppy:148 #, c-format msgid "omit scsi modules" msgstr "scsi modules weglaten" #: standalone/drakfloppy:151 #, c-format msgid "Add a module" msgstr "module toevoegen" #: standalone/drakfloppy:160 #, c-format msgid "Remove a module" msgstr "Een module verwijderen" #: standalone/drakfloppy:295 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Zorg ervoor dat er een schijf aanwezig is in apparaat %s" #: standalone/drakfloppy:301 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Er is geen opslagmedium aanwezig in apparaat %s of deze is niet te " "beschrijven.\n" "Graag een ander medium plaatsen." #: standalone/drakfloppy:305 #, c-format msgid "Unable to fork: %s" msgstr "Kan geen nieuw proces beginnen: %s" #: standalone/drakfloppy:308 #, c-format msgid "Floppy creation completed" msgstr "Aanmaken diskette voltooid" #: standalone/drakfloppy:308 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "Het aanmaken van de opstartdiskette is succesvol voltooid \n" #: standalone/drakfloppy:311 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Kan mkbootdisk niet netjes afsluiten: \n" "\n" "%s" #: standalone/drakfont:183 #, c-format msgid "Search installed fonts" msgstr "Zoek in geïnstalleerde lettertypen" #: standalone/drakfont:185 #, c-format msgid "Unselect fonts installed" msgstr "Geïnstalleerde lettertypen deselecteren" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "alle lettertypen ontleden" #: standalone/drakfont:210 #, fuzzy, c-format msgid "No fonts found" msgstr "geen lettertypen gevonden." #: standalone/drakfont:218 standalone/drakfont:258 standalone/drakfont:325 #: standalone/drakfont:358 standalone/drakfont:366 standalone/drakfont:392 #: standalone/drakfont:410 standalone/drakfont:424 #, c-format msgid "done" msgstr "klaar" #: standalone/drakfont:223 #, fuzzy, c-format msgid "Could not find any font in your mounted partitions" msgstr "kan geen lettertypen vinden in uw aangekoppelde partities" #: standalone/drakfont:256 #, c-format msgid "Reselect correct fonts" msgstr "Correcte lettertypen opnieuw selecteren" #: standalone/drakfont:259 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "kan geen enkel lettertpype vinden.\n" #: standalone/drakfont:269 #, c-format msgid "Search for fonts in installed list" msgstr "Zoek lettertypen in lijst 'geïnstalleerd'" #: standalone/drakfont:294 #, c-format msgid "%s fonts conversion" msgstr "%s-lettertypeconversie" #: standalone/drakfont:323 #, c-format msgid "Fonts copy" msgstr "Kopiëren van lettertypen" #: standalone/drakfont:326 #, c-format msgid "True Type fonts installation" msgstr "Installatie van True Type lettertypen" #: standalone/drakfont:333 #, c-format msgid "please wait during ttmkfdir..." msgstr "Even geduld terwijl 'ttmkfdir' wordt uitgevoerd..." #: standalone/drakfont:334 #, c-format msgid "True Type install done" msgstr "True Type installatie klaar" #: standalone/drakfont:340 standalone/drakfont:355 #, c-format msgid "type1inst building" msgstr "'type1inst' is bezig" # right translation? What is meant here? #: standalone/drakfont:349 #, c-format msgid "Ghostscript referencing" msgstr "Ghostscript verwijzingen" #: standalone/drakfont:359 #, c-format msgid "Suppress Temporary Files" msgstr "Tijdelijke bestanden onderdrukken" #: standalone/drakfont:362 #, c-format msgid "Restart XFS" msgstr "XFS herstarten" #: standalone/drakfont:408 standalone/drakfont:418 #, c-format msgid "Suppress Fonts Files" msgstr "Lettertype-bestanden onderdrukken" #: standalone/drakfont:420 #, c-format msgid "xfs restart" msgstr "xfs herstarten" #: standalone/drakfont:428 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Ga na dat u het recht heeft om lettertypen te installeren op uw systeem en " "ze te gebruiken, \n" "alvorens lettertypen te installeren.\n" "-U kunt de lettertypen op de gebruikelijke manier installeren. In zeldzame " "gevallen kunnen\n" "nep-lettertypen uw X Server laten hangen." #: standalone/drakfont:477 standalone/drakfont:486 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:487 #, c-format msgid "Font List" msgstr "Lettertypenlijst" #: standalone/drakfont:493 #, c-format msgid "About" msgstr "Info" #: standalone/drakfont:495 standalone/drakfont:687 standalone/drakfont:725 #, fuzzy, c-format msgid "Uninstall" msgstr "Post-deïnstallatie" #: standalone/drakfont:496 #, fuzzy, c-format msgid "Import" msgstr "poort" #: standalone/drakfont:512 #, c-format msgid "" "Copyright (C) 2001-2002 by MandrakeSoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:521 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" "Dit programma is vrije software; U mag het herdistribueren en/of\n" "wijzigen onder de voorwaarden van de GNU General Public License als\n" "geplubiceerd door the Free Software Foundation; ofwel versie 2, als\n" "ook (uw eigen optie) elke latere versie.\n" "\n" "Dit programma wordt gedistribueerd in de hoop dat het bruikbaar\n" "zal zijn, maar ZONDER ENIGE GARANTIE; zelfs zonder de impliciete \n" "garantie voor VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN\n" "SPECIFIEK DOEL. Zie de GNU General Public License voor meer\n" "details.\n" "\n" "U zou een kopie ontvangen moeten hebben van de GNU General\n" "Public License bij dit programma; indien dit niet het geval is,\n" "schrijf dan een brief naar de Free Software Foundation, Inc.,\n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: standalone/drakfont:537 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:556 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Kies de toepassingen waarin de lettertypen beschikbaar zullen zijn:" #: standalone/drakfont:557 #, fuzzy, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Ga na dat u het recht heeft om lettertypen te installeren op uw systeem en " "ze te gebruiken, \n" "alvorens lettertypen te installeren.\n" "-U kunt de lettertypen op de gebruikelijke manier installeren. In zeldzame " "gevallen kunnen\n" "nep-lettertypen uw X Server laten hangen." #: standalone/drakfont:567 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:568 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:569 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:570 #, c-format msgid "Generic Printers" msgstr "Generieke printers" #: standalone/drakfont:586 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Selecteer het lettertypebestand of map en klik op 'Toevoegen'" #: standalone/drakfont:587 #, c-format msgid "File Selection" msgstr "Bestandsselectie" #: standalone/drakfont:600 #, c-format msgid "You've not selected any font" msgstr "U heeft geen enkel lettertype geselecteerd" #: standalone/drakfont:652 #, fuzzy, c-format msgid "Import fonts" msgstr "Import van lettertypen" #: standalone/drakfont:657 #, fuzzy, c-format msgid "Install fonts" msgstr "Lettertypen deïnstalleren" #: standalone/drakfont:692 #, c-format msgid "click here if you are sure." msgstr "klik hier als u er zeker van bent." #: standalone/drakfont:694 #, c-format msgid "here if no." msgstr "hier zoniet." #: standalone/drakfont:733 #, c-format msgid "Unselected All" msgstr "Alle gedeselecteerd" #: standalone/drakfont:736 #, c-format msgid "Selected All" msgstr "Alles geselecteerd" #: standalone/drakfont:739 #, c-format msgid "Remove List" msgstr "Lijst verwijderen" #: standalone/drakfont:750 standalone/drakfont:769 #, fuzzy, c-format msgid "Importing fonts" msgstr "Import van lettertypen" #: standalone/drakfont:754 standalone/drakfont:774 #, c-format msgid "Initial tests" msgstr "Initialen-tests" #: standalone/drakfont:755 #, c-format msgid "Copy fonts on your system" msgstr "Lettertypen op uw systeem kopiëren" #: standalone/drakfont:756 #, c-format msgid "Install & convert Fonts" msgstr "Lettertypen installeren & converteren" #: standalone/drakfont:757 #, c-format msgid "Post Install" msgstr "Post-installatie" #: standalone/drakfont:775 #, c-format msgid "Remove fonts on your system" msgstr "Lettertypen op uw systeem verwijderen" #: standalone/drakfont:776 #, c-format msgid "Post Uninstall" msgstr "Post-deïnstallatie" #: standalone/drakgw:58 standalone/drakgw:193 #, c-format msgid "Internet Connection Sharing" msgstr "Internetverbinding delen" #: standalone/drakgw:124 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Internet Connectie Delen staat niet aan" #: standalone/drakgw:125 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Het instellen van Internetverbinding delen is al uitgevoerd.\n" "Het staat op dit moment uit.\n" "\n" "Wat wenst u te doen?" #: standalone/drakgw:129 standalone/drakvpn:125 #, c-format msgid "enable" msgstr "inschakelen" #: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:99 #: standalone/drakvpn:125 #, c-format msgid "reconfigure" msgstr "herconfigureren" #: standalone/drakgw:129 standalone/drakgw:156 standalone/drakvpn:99 #: standalone/drakvpn:125 standalone/drakvpn:374 standalone/drakvpn:733 #, c-format msgid "dismiss" msgstr "klaar" #: standalone/drakgw:136 #, c-format msgid "Enabling servers..." msgstr "Bezig met inschakelen van servers..." #: standalone/drakgw:148 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Internetverbinding delen staat op dit moment aan" #: standalone/drakgw:151 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Internetverbinding delen staat op dit moment aan" #: standalone/drakgw:152 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "De instellingen van Internetverbinding Delen zijn al gemaakt.\n" "Ze zijn op dit moment actief.\n" "\n" "Wat wilt u doen?" #: standalone/drakgw:156 standalone/drakvpn:99 #, c-format msgid "disable" msgstr "uitschakelen" #: standalone/drakgw:159 #, c-format msgid "Disabling servers..." msgstr "Bezig met servers uitzetten..." #: standalone/drakgw:174 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Internetverbinding delen staat op dit moment uit." #: standalone/drakgw:194 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "U staat op het punt om uw computer te configureren om zijn Internet-\n" "verbinding te delen. Met deze functie zullen andere computers op uw\n" "netwerk in staat zijn de internetverbinding van deze computer te gebruiken.\n" "\n" "Vergewis uzelf ervan dat u uw netwerk-/internetverbinding hebt " "geconfigureerd met gebruikmaking van drakconnect voordat u verder gaat.\n" "\n" "Opmerking: u heeft een specifiek hiervoor bestemde netwerk-adapter nodig\n" "om een Local Area Network (LAN) op te zetten." #: standalone/drakgw:237 #, c-format msgid "Interface %s (using module %s)" msgstr "Interface %s (gebruikt module %s)" #: standalone/drakgw:238 #, c-format msgid "Interface %s" msgstr "Interface %s" #: standalone/drakgw:247 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "Geen netwerk adapter op uw systeem!" #: standalone/drakgw:254 #, c-format msgid "Network interface" msgstr "Netwerk Interface" #: standalone/drakgw:255 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Er is maar één geconfigureerde netwerkadapter op uw systeem:\n" "\n" "%s \n" "\n" "Ik sta op het punt om uw Local Area Network te koppelen aan\n" "deze adapter." #: standalone/drakgw:262 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Kies alstublieft welke netwerkadapter verbinding zal maken met uw Local Area " "Network." #: standalone/drakgw:291 #, c-format msgid "Network interface already configured" msgstr "Netwerk-interface reeds geconfigureerd" #: standalone/drakgw:292 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Waarschuwing, de netwerk-adapter (%s) is reeds geconfigureerd.\n" "\n" "Wilt u een automatische herconfiguratie?\n" "\n" "U kunt het ook handmatig doen, maar u moet dan wel weten wat u doet." #: standalone/drakgw:297 #, c-format msgid "Automatic reconfiguration" msgstr "Automatisch opnieuw configureren" #: standalone/drakgw:297 #, c-format msgid "No (experts only)" msgstr "Nee (alleen experts)" #: standalone/drakgw:298 #, c-format msgid "Show current interface configuration" msgstr "Huidige interface-configuratie tonen" #: standalone/drakgw:299 #, c-format msgid "Current interface configuration" msgstr "Huidige interface-configuratie" #: standalone/drakgw:300 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Huidige configuratie van '%s':\n" "\n" "Netwerk: %s\n" "IP adres: %s\n" "IP attribution: %s\n" "Stuurprogramma: %s" #: standalone/drakgw:313 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Het is mogelijk uw huidige configuratie te behouden en aan te nemen dat u " "reeds een DHCP-server heeft ingesteld; controleert u in dat geval of het " "netwerk dat u gebruikt voor uw lokale netwerk correct is ingelezen; het " "wordt niet geherconfigureerd en uw DHCP-serverconfiguratie wordt niet " "aangeraakt.\n" "\n" "De standaard DNS-ingang is de bufferende nameserver die op de firewall is " "geconfigureerd. U kunt deze vervangen door bijvoorbeeld het IP-adres van de " "DNS van uw internetaanbieder.\n" "\t\t \n" "In andere gevallen kan het installatieprogramma uw interface herconfigureren " "en een DHCP-server (opnieuw) voor u instellen.\n" "\n" #: standalone/drakgw:320 #, c-format msgid "Local Network adress" msgstr "Lokaal netwerkadres" #: standalone/drakgw:324 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is." msgstr "" "DHCP serverconfiguratie.\n" "\n" "Hier kunt u verscheidene opties selecteren voor de DHCP-serverconfiguratie.\n" "Wanneer u de betekenis van een optie niet kent, laat deze dan onveranderd." #: standalone/drakgw:328 #, c-format msgid "(This) DHCP Server IP" msgstr "(Deze) DHCP-server IP" #: standalone/drakgw:329 #, c-format msgid "The DNS Server IP" msgstr "Het IP-adres van de DNS-server" #: standalone/drakgw:330 #, c-format msgid "The internal domain name" msgstr "De interne domeinnaam" #: standalone/drakgw:331 #, c-format msgid "The DHCP start range" msgstr "Het DHCP startbereik" #: standalone/drakgw:332 #, c-format msgid "The DHCP end range" msgstr "Het DHCP eindbereik" #: standalone/drakgw:333 #, c-format msgid "The default lease (in seconds)" msgstr "Standaardlease (in seconden)" #: standalone/drakgw:334 #, c-format msgid "The maximum lease (in seconds)" msgstr "Maximumlease in (seconden)" #: standalone/drakgw:335 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Interface en DHCP-server opnieuw configureren" #: standalone/drakgw:342 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "Het lokale netwerk eindigde niet op '.0', procedure gestaakt" #: standalone/drakgw:352 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "Potentieel LAN-adresconflict gevonden in de huidige configuratie \n" "van %s!\n" #: standalone/drakgw:362 #, c-format msgid "Configuring..." msgstr "Configureren..." #: standalone/drakgw:363 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" "Bezig met het configureren van scripts, installeren van software, starten " "vanservers..." #: standalone/drakgw:399 standalone/drakpxe:231 standalone/drakvpn:276 #, c-format msgid "Problems installing package %s" msgstr "Problemen met installeren van pakket %s" #: standalone/drakgw:595 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Alles is geconfigureerd. \n" "U kunt nu uw internetverbinding delen met andere computers op uw Local Area " "Network, met gebruikmaking van automatische netwerkconfiguratie (DHCP) en\n" "een Transparent Proxy Cache-server (SQUID)." #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Copyright © 2003-2004 MandrakeSoft.\n" "Dit is vrije software en mag verder gedistribueerd worden onder de " "voorwaarden van de GNU GPL.\n" "\n" "Gebruik: \n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - drukt deze hulpboodschap af.\n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" " --id - html-hulppagina laden die behoort bij id_label\n" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" " --doc - koppeling naar andere webpagina (voor WM " "welkomstboodschap-schil)\n" #: standalone/drakhelp:35 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "kan %s niet weergeven \n" ". Geen hulp-ingang van dit type\n" #: standalone/drakhelp:41 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "Er is op uw computer geen bladerprogramma geïnstalleerd. Indien u het " "hulpsysteem wilt doorbladeren, installeer er dan één." #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "Systeeminstellingen" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "Aangepaste instellingen" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "Aangepaste- en systeeminstellingen" #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "Bewerkbaar" #: standalone/drakperm:48 standalone/drakperm:314 #, c-format msgid "Path" msgstr "Pad" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "Gebruiker" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Groep" #: standalone/drakperm:48 standalone/drakperm:326 #, c-format msgid "Permissions" msgstr "Permissies" #: standalone/drakperm:107 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Hier kunt u zien welke bestanden u kunt gebruiken om\n" "permissies, eigenaars en groepen juist in te stellen via 'msec'.\n" "U kunt ook uw eigen regels maken die voorrang krijgen op de standaard regels." #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "Het huidige beveiligingsniveau is %s.\n" "Selecteer de permissies om te bekijken/bewerken" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Omhoog" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "Geselecteerde regel één niveau omhoog verplaatsen" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Omlaag" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "Geselecteerde regel één niveau omlaag verplaatsen" #: standalone/drakperm:123 #, c-format msgid "Add a rule" msgstr "Regel toevoegen" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "Nieuwe regel aan het eind toevoegen" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "Geselecteerde regel verwijderen" #: standalone/drakperm:125 standalone/drakups:281 standalone/drakups:330 #: standalone/drakups:350 standalone/drakvpn:331 standalone/drakvpn:692 #: standalone/printerdrake:229 #, c-format msgid "Edit" msgstr "Bewerken" #: standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "Huidige regel bewerken" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "bladeren" # Wat is hier de context? #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Lezen" #: standalone/drakperm:253 #, c-format msgid "Enable \"%s\" to read the file" msgstr "\"%s\" het bestand laten lezen" #: standalone/drakperm:256 #, c-format msgid "Write" msgstr "Schrijven" #: standalone/drakperm:257 #, c-format msgid "Enable \"%s\" to write the file" msgstr "\"%s\" naar het bestand laten schrijven" #: standalone/drakperm:260 #, c-format msgid "Execute" msgstr "Uitvoeren" #: standalone/drakperm:261 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Schakel \"%s\" in om het bestand uit te voeren" #: standalone/drakperm:263 #, c-format msgid "Sticky-bit" msgstr "Sticky-bit" #: standalone/drakperm:263 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Bedoeld voor mappen:\n" " slechts de eigenaar van een map of bestand in deze map kan deze verwijderen" #: standalone/drakperm:264 #, c-format msgid "Set-UID" msgstr "Set-UID" #: standalone/drakperm:264 #, c-format msgid "Use owner id for execution" msgstr "Eigenaar-ID gebruiken bij uitvoeren" #: standalone/drakperm:265 #, c-format msgid "Set-GID" msgstr "Set-GID" #: standalone/drakperm:265 #, c-format msgid "Use group id for execution" msgstr "Groeps-ID gebruiken voor uitvoeren" #: standalone/drakperm:283 #, c-format msgid "User :" msgstr "Gebruiker:" #: standalone/drakperm:285 #, c-format msgid "Group :" msgstr "Groep:" #: standalone/drakperm:289 #, c-format msgid "Current user" msgstr "Huidige gebruiker" #: standalone/drakperm:290 #, c-format msgid "When checked, owner and group won't be changed" msgstr "Wanneer aangevinkt, zullen de eigenaar en groep niet veranderen" #: standalone/drakperm:300 #, c-format msgid "Path selection" msgstr "Padselectie" #: standalone/drakperm:320 #, c-format msgid "Property" msgstr "Eigenschap" #: standalone/drakpxe:55 #, c-format msgid "PXE Server Configuration" msgstr "Configuratie van PXE-server" #: standalone/drakpxe:111 #, c-format msgid "Installation Server Configuration" msgstr "Configuratie van installatieserver" #: standalone/drakpxe:112 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "U staat op het punt om uw computer te configureren om een PXE-server als\n" "een DHCP-server en een TFTP-server te installeren om een installatie-\n" "server te bouwen.\n" "Met deze fuctionaliteit zullen andere computers op uw lokale netwerk\n" "installeerbaar zijn vanaf deze computer.\n" "\n" "Zorg ervoor dat u uw netwerk-/internettoegang heeft geconfigureerd met\n" "drakconnect voordat u verder gaat.\n" "Opmerking: u heeft een specifiek hiervoor bestemde netwerk-adapter nodig\n" "om een Local Area Network (LAN) op te zetten." #: standalone/drakpxe:143 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Kies met welke netwerkinterface dient voor gebruik met de DHCP-server." #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "Interface %s (op netwerk %s)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "De DHCP server laat een andere computer opstarten met PXE in het gegeven " "adresbereik.\n" "\n" "Het netwerkadres is %s, met een netmasker van %s.\n" "\n" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "Het DHCP start-IP" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "Het DHCP eind-IP" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Geef aan waar het installatie-beeldbestand beschikbaar zal zijn.\n" "\n" "Indien u geen bestaande map heeft, kopiëer dan de inhoud van de CD of DVD.\n" #: standalone/drakpxe:192 #, c-format msgid "Installation image directory" msgstr "Map van installatie-beeldbestand" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "Geen beeldbestand gevonden" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Geen CD- of DVD-beeldbestand gevonden, gelieve het installatieprogramma en " "de rpm-bestanden te kopiëren." #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Voer de locatie van het auto_install.cfg-bestand in.\n" "\n" "U kunt het leeg laten indien u de automatische installatiemodus niet wilt\n" "instellen.\n" "\n" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "Locatie van auto_install.cfg-bestand" #: standalone/draksec:44 #, c-format msgid "ALL" msgstr "ALLE" #: standalone/draksec:44 #, c-format msgid "LOCAL" msgstr "LOKAAL" #: standalone/draksec:44 standalone/drakvpn:1144 #, c-format msgid "default" msgstr "standaard" #: standalone/draksec:44 #, c-format msgid "ignore" msgstr "negeren" #: standalone/draksec:44 #, c-format msgid "no" msgstr "nee" #: standalone/draksec:44 #, c-format msgid "yes" msgstr "ja" #: standalone/draksec:81 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "Hier kunt u het beveiligingsniveau en de beheerder van uw computer \n" "instellen.\n" "\n" "\n" "De Beveiligingsbeheerder is degene die beveiligingswaarschuwingen ontvangt " "als\n" "de 'Beveiligingswaarschuwingen'-optie is aangezet. Het kan een " "gebruikersnaam\n" "of e-mailadres zijn.\n" "\n" "\n" "Het Beveiligingsniveau-menu stelt u in staat om één van de zes\n" "voorgeconfigureerde beveiligingsniveaus te kiezen die bij msec zijn\n" "geleverd. Deze niveaus variëren van matige beveiliging en gebruiksgemak, \n" "tot een paranoïde configuratie, geschikt voor zeer gevoelige\n" "servertoepassingen:\n" "\n" "Matig: Dit is een erg onveilig maar\n" "erg gemakkelijk beveiligingsniveau. Gebruik het alleen voor computers die\n" "niet aan een netwerk verbonden zijn en niet voor iedereen toegankelijk.\n" "\n" "\n" "Standaard: Dit is het standaard \n" "beveiligingsniveau voor een computer die gebruikt wordt voor internet-\n" "toegang als een client.\n" "\n" "\n" "Hoog: Er zijn al enkele beperkingen,\n" "en meer automatische controles worden 's nachts uitgevoerd.\n" "\n" "\n" "Hoger: De beveiliging is nu hoog " "genoeg om het systeem als server te gebruiken die verbindingen\n" "van vele clients kan accpeteren. Als uw computer alleen client is op het\n" "Internet, kunt u beter een lager niveau kiezen.\n" "\n" "Paranoïde:: Dit is vergelijkbaar met\n" "het vorige niveau, maar het systeem is volledig op slot en maximale\n" "beveiliginsmaatregelen zijn van kracht" #: standalone/draksec:129 #, c-format msgid "(default value: %s)" msgstr "(standaardwaarde: %s)" #: standalone/draksec:170 #, c-format msgid "Security Level:" msgstr "Beveiligingsniveau:" #: standalone/draksec:173 #, c-format msgid "Security Alerts:" msgstr "Beveiligingswaarschuwingen:" #: standalone/draksec:177 #, c-format msgid "Security Administrator:" msgstr "Beveiligingsbeheerder:" #: standalone/draksec:179 #, c-format msgid "Basic options" msgstr "Basisopties" #: standalone/draksec:192 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "De volgende opties kunnen worden ingesteld om uw systeembeveiliging\n" "aan te passen. Indien u uitleg nodig heeft, bekijk dan de zwevende tip.\n" #: standalone/draksec:194 #, c-format msgid "Network Options" msgstr "Netwerkopties" #: standalone/draksec:194 #, c-format msgid "System Options" msgstr "Systeemopties" #: standalone/draksec:240 #, c-format msgid "Periodic Checks" msgstr "Periodieke controles" #: standalone/draksec:258 #, c-format msgid "Please wait, setting security level..." msgstr "Even geduld, bezig met instellen van beveiligingsniveau..." #: standalone/draksec:264 #, c-format msgid "Please wait, setting security options..." msgstr "Even geduld, bezig met instellen van beveiligingsopties..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Geen geluidskaart gevonden!" #: standalone/draksound:48 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Er is geen geluidskaart gevonden op uw computer. Ga na dat een door Linux " "ondersteunde geluidskaart correct aangesloten is.\n" "\n" "\n" "U kunt onze randapparatuur-database bereiken op:\n" "\n" "\n" "http://www.linux-mandrake.com/nl/hardware.php3" #: standalone/draksound:55 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Opmerking: als u een ISA PnP geluidskaart heeft, zult u het alsaconf- of " "sndconfig-programma moeten gebruiken. Type hiervoor gewoon \"alsaconf\" of " "\"sndconfig\" in een terminalvenster." #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "pakket 'ImageMagick' is vereist voor correct functioneren.\n" "Klik op \"Ok\" om 'ImageMagick' te installeren of op \"Annuleren\" om af te " "sluiten" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "eerste stap creëren" #: standalone/draksplash:71 #, c-format msgid "final resolution" msgstr "uiteindelijke resolutie" #: standalone/draksplash:72 #, c-format msgid "choose image file" msgstr "afbeeldingsbestand kiezen" #: standalone/draksplash:73 #, c-format msgid "Theme name" msgstr "Themanaam" #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "Bladeren" #: standalone/draksplash:93 standalone/draksplash:158 #, c-format msgid "Configure bootsplash picture" msgstr "Opstartscherm-afbeelding configureren" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "X-coördinaat van tekstveld\n" "in aantal tekens" #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "Y-coördinaat van tekstveld\n" "in aantal tekens" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "tekstbreedte" #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "tekstveld-hoogte" #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "de X-coördinaat van de linkerbovenhoek\n" "van de voortgangsbalk" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "de Y-coördinaat van de linkerbovenhoek\n" "van de voortgangsbalk" #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr "de breedte van de voortgangsbalk" #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr "de hoogte van de voortgangsbalk" #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr "de kleur van de voortgangsbalk" #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "Voorbeeld" #: standalone/draksplash:121 #, c-format msgid "Save theme" msgstr "Thema opslaan" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "Kleur kiezen" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "Logo weergeven in tekstscherm (console)" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "Kernel-meldingen standaard onderdrukken" #: standalone/draksplash:161 standalone/draksplash:319 #: standalone/draksplash:462 #, c-format msgid "Notice" msgstr "Melding" #: standalone/draksplash:161 standalone/draksplash:319 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "Dit thema heeft nog geen opstartscherm in %s!" #: standalone/draksplash:167 #, c-format msgid "choose image" msgstr "afbeelding kiezen" #: standalone/draksplash:209 #, c-format msgid "saving Bootsplash theme..." msgstr "bezig met opslaan opstartscherm-thema..." #: standalone/draksplash:443 #, c-format msgid "ProgressBar color selection" msgstr "Voortgangsbalk-kleurselectie" #: standalone/draksplash:462 #, c-format msgid "You must choose an image file first!" msgstr "U dient eerst een beeldbestand te kiezen!" #: standalone/draksplash:467 #, c-format msgid "Generating preview ..." msgstr "Bezig met genereren voorbeeld..." #: standalone/draksplash:512 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s opstartscherm (%s)-voorbeeld" #: standalone/drakups:63 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:69 #, fuzzy, c-format msgid "Add an UPS device" msgstr "Item toevoegen" #: standalone/drakups:72 #, fuzzy, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll be add a new UPS to your system.\n" msgstr "" "Welkom bij het e-mail configuratieprogramma.\n" "\n" "Hier kunt u het waarschuwingssysteem instellen.\n" #: standalone/drakups:79 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you prefer autodetect UPS devices connected to this machine or ?" msgstr "" #: standalone/drakups:82 #, fuzzy, c-format msgid "Autodetection" msgstr "Automatisch bespeuren" #: standalone/drakups:90 standalone/harddrake2:134 #, c-format msgid "Detection in progress" msgstr "Bezig met zoeken" #: standalone/drakups:108 standalone/drakups:144 standalone/logdrake:479 #: standalone/logdrake:485 #, c-format msgid "Congratulations" msgstr "Gefeliciteerd" #: standalone/drakups:109 #, fuzzy, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "De wizard heeft de e-mailwaarschuwing met succes uitgeschakeld." #: standalone/drakups:111 #, fuzzy, c-format msgid "No new UPS devices was found" msgstr "Geen apparaten gevonden" #: standalone/drakups:116 standalone/drakups:128 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "CUPS printerconfiguratie" #: standalone/drakups:116 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "Test uw muis alstublieft:" #: standalone/drakups:117 #, fuzzy, c-format msgid "Manufacturer / Model:" msgstr "Printerfabrikant, model" #: standalone/drakups:128 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:133 #, c-format msgid "Name:" msgstr "Naam:" #: standalone/drakups:133 #, fuzzy, c-format msgid "The name of your ups" msgstr "de CVE-naam" #: standalone/drakups:134 #, c-format msgid "The driver that manage your ups" msgstr "" #: standalone/drakups:135 #, fuzzy, c-format msgid "Port:" msgstr "Poort" #: standalone/drakups:137 #, fuzzy, c-format msgid "The port on which is connected your ups" msgstr "het type bus waaraan uw muis is verbonden" #: standalone/drakups:144 #, fuzzy, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "De wizard heeft de e-mailwaarschuwing met succes geconfigureerd." #: standalone/drakups:232 #, fuzzy, c-format msgid "UPS devices" msgstr "Diensten" #: standalone/drakups:233 standalone/drakups:251 standalone/drakups:266 #: standalone/harddrake2:63 #, c-format msgid "Name" msgstr "Naam" #: standalone/drakups:250 #, fuzzy, c-format msgid "UPS users" msgstr "Gebruikers" #: standalone/drakups:265 #, fuzzy, c-format msgid "Access Control Lists" msgstr "toegang tot netwerkprogrammatuur" #: standalone/drakups:266 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:277 #, fuzzy, c-format msgid "Rules" msgstr "Routers:" #: standalone/drakups:278 #, fuzzy, c-format msgid "Action" msgstr "/_Acties" #: standalone/drakups:278 standalone/drakvpn:1144 standalone/harddrake2:57 #, c-format msgid "Level" msgstr "Niveau" #: standalone/drakups:278 #, fuzzy, c-format msgid "ACL name" msgstr "Naam van de LVM?" #: standalone/drakups:297 standalone/drakups:301 standalone/drakups:310 #, fuzzy, c-format msgid "DrakUPS" msgstr "DrakVPN" #: standalone/drakups:307 #, fuzzy, c-format msgid "Welcome to the UPS configuration tools" msgstr "Instelling Testen" #: standalone/drakvpn:71 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:93 #, c-format msgid "The VPN connection is enabled." msgstr "De VPN-verbinding is ingeschakeld." #: standalone/drakvpn:94 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do ?" msgstr "" "De instellingen van een VPN-verbinding zijn al gemaakt.\n" "\n" "Het is op dit moment actief.\n" "\n" "Wat wilt u doen?" #: standalone/drakvpn:103 #, c-format msgid "Disabling VPN..." msgstr "VPN uitschakelen..." #: standalone/drakvpn:112 #, c-format msgid "The VPN connection is now disabled." msgstr "De VPN-verbinding is nu uitgeschakeld." #: standalone/drakvpn:119 #, c-format msgid "VPN connection currently disabled" msgstr "De VPN-verbinding is momenteel uitgeschakeld." #: standalone/drakvpn:120 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do ?" msgstr "" "De instellingen van een VPN-verbinding zijn al gemaakt.\n" "\n" "Het is op dit moment niet actief.\n" "\n" "Wat wilt u doen?" #: standalone/drakvpn:133 #, c-format msgid "Enabling VPN..." msgstr "VPN inschakelen..." #: standalone/drakvpn:139 #, c-format msgid "The VPN connection is now enabled." msgstr "De VPN-verbinding is nu ingeschakeld." #: standalone/drakvpn:153 standalone/drakvpn:181 #, c-format msgid "Simple VPN setup." msgstr "Eenvoudige VPN-instellingen." #: standalone/drakvpn:154 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" "U staat op het punt uw computer te configureren om een VPN-verbinding te \n" "gebruiken.\n" "Met deze functie kunnen computers op uw privé-netwerk en computers op \n" "andere privé-netwerken op afstand bronnen delen, door hun respectievelijke\n" "firewalls, over het Internet, op een veilige wijze. \n" "\n" "De communicatie over het Internet is vercijferd. De lokale en afstands-\n" "computers zien eruit alsof ze op hetzelfde netwerk zitten.\n" "\n" "Zorg ervoor dat u uw netwerk-/internettoegang hebt geconfigureerd met \n" "drakconnect voordat u verder gaat." #: standalone/drakvpn:182 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" "VPN-verbinding.\n" "\n" "Dit programma is gebaseerd op de volgende projecten:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - de documentatie die bij het %s-pakket geleverd is\n" "\n" "Leest u TENMINSTE de ipsec-howto documentatie\n" "voordat u verder gaat." #: standalone/drakvpn:194 #, c-format msgid "Kernel module." msgstr "Kernel-module." #: standalone/drakvpn:195 #, c-format msgid "" "The kernel need to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:290 #, c-format msgid "Security Policies" msgstr "Beveiligingsbeleid" #: standalone/drakvpn:290 #, c-format msgid "IKE daemon racoon" msgstr "IKE-voorziening racoon" #: standalone/drakvpn:293 standalone/drakvpn:304 #, c-format msgid "Configuration file" msgstr "Configuratiebestand" #: standalone/drakvpn:294 #, c-format msgid "" "Configuration step !\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure ?\n" msgstr "" #: standalone/drakvpn:305 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:323 standalone/drakvpn:683 #, c-format msgid "%s entries" msgstr "%s items" #: standalone/drakvpn:324 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now :\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do ?\n" msgstr "" # noun or verb? #: standalone/drakvpn:331 standalone/drakvpn:692 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "Weergeven" #: standalone/drakvpn:331 standalone/drakvpn:692 #, c-format msgid "Commit" msgstr "Bevestigen" #: standalone/drakvpn:345 standalone/drakvpn:349 standalone/drakvpn:707 #: standalone/drakvpn:711 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Configuratie weergeven" #: standalone/drakvpn:350 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" "Het bestand %s bestaat niet.\n" "\n" "Dit zal wel een nieuwe configuratie zijn.\n" "\n" "U dient terug te gaan en 'Toevoegen' te kiezen.\n" #: standalone/drakvpn:366 #, c-format msgid "ipsec.conf entries" msgstr "ipsec.conf-regels" #: standalone/drakvpn:367 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton :\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:374 #, c-format msgid "config setup" msgstr "config-instellingen" #: standalone/drakvpn:374 #, c-format msgid "conn %default" msgstr "verbinding %default" #: standalone/drakvpn:374 #, c-format msgid "normal conn" msgstr "normale verbinding" #: standalone/drakvpn:380 standalone/drakvpn:421 standalone/drakvpn:508 #, c-format msgid "Exists !" msgstr "Bestaat!" #: standalone/drakvpn:381 standalone/drakvpn:422 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:398 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:403 #, c-format msgid "interfaces" msgstr "interfaces" #: standalone/drakvpn:404 #, c-format msgid "klipsdebug" msgstr "klipsdebug" #: standalone/drakvpn:405 #, c-format msgid "plutodebug" msgstr "plutodebug" #: standalone/drakvpn:406 #, c-format msgid "plutoload" msgstr "plutoload" #: standalone/drakvpn:407 #, c-format msgid "plutostart" msgstr "plutostart" #: standalone/drakvpn:408 #, c-format msgid "uniqueids" msgstr "uniqueids" #: standalone/drakvpn:442 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If don't define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" "Dit is het eerste gedeelte na de config-\n" "instellingen.\n" "\n" "Hier definiëert u de standaardinstellingen.\n" "Alle andere gedeeltes volgen deze.\n" "De instellingen links zijn optioneel. Indien u\n" "ze hier niet globaal definiëert, kunt u ze\n" "in elk gedeelte apart definiëren.\n" #: standalone/drakvpn:449 #, c-format msgid "PFS" msgstr "PFS" #: standalone/drakvpn:450 #, c-format msgid "keyingtries" msgstr "keyingtries" #: standalone/drakvpn:451 #, c-format msgid "compress" msgstr "compress" #: standalone/drakvpn:452 #, c-format msgid "disablearrivalcheck" msgstr "disablearrivalcheck" #: standalone/drakvpn:453 standalone/drakvpn:492 #, c-format msgid "left" msgstr "left" #: standalone/drakvpn:454 standalone/drakvpn:493 #, c-format msgid "leftcert" msgstr "leftcert" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "leftrsasigkey" msgstr "leftrsasigkey" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftsubnet" msgstr "leftsubnet" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftnexthop" msgstr "leftnexthop" #: standalone/drakvpn:486 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:489 #, c-format msgid "section name" msgstr "gedeeltenaam" #: standalone/drakvpn:490 #, c-format msgid "authby" msgstr "authby" #: standalone/drakvpn:491 #, c-format msgid "auto" msgstr "auto" #: standalone/drakvpn:497 #, c-format msgid "right" msgstr "right" #: standalone/drakvpn:498 #, c-format msgid "rightcert" msgstr "rightcert" #: standalone/drakvpn:499 #, c-format msgid "rightrsasigkey" msgstr "rightrsasigkey" #: standalone/drakvpn:500 #, c-format msgid "rightsubnet" msgstr "rightsubnet" #: standalone/drakvpn:501 #, c-format msgid "rightnexthop" msgstr "rightnexthop" #: standalone/drakvpn:509 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:541 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:574 standalone/drakvpn:824 #, c-format msgid "Edit section" msgstr "Gedeelte bewerken" #: standalone/drakvpn:575 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:578 standalone/drakvpn:658 standalone/drakvpn:829 #: standalone/drakvpn:875 #, c-format msgid "Section names" msgstr "Gedeeltenamen" #: standalone/drakvpn:588 #, c-format msgid "Can't edit !" msgstr "Kan niet bewerken!" #: standalone/drakvpn:589 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the oportunistic encryption.\n" msgstr "" #: standalone/drakvpn:598 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:609 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:622 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:643 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:654 standalone/drakvpn:871 #, c-format msgid "Remove section" msgstr "Gedeelte verwijderen" #: standalone/drakvpn:655 standalone/drakvpn:872 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:684 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now :\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:712 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:726 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:727 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton :\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:733 #, fuzzy, c-format msgid "path" msgstr "Pad" #: standalone/drakvpn:733 #, fuzzy, c-format msgid "remote" msgstr "Verwijderen" #: standalone/drakvpn:733 #, fuzzy, c-format msgid "sainfo" msgstr "Spaans" #: standalone/drakvpn:741 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:744 #, fuzzy, c-format msgid "path type" msgstr "Type veranderen" #: standalone/drakvpn:748 #, c-format msgid "" "path include path : specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file : specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path : racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion : include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File : Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:768 standalone/drakvpn:861 #, fuzzy, c-format msgid "real file" msgstr "Selecteer bestand" #: standalone/drakvpn:791 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:808 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:825 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:836 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:845 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:853 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:860 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:901 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:921 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:922 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:939 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Europees protocol" #: standalone/drakvpn:940 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:954 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:955 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:972 #, fuzzy, c-format msgid "Sainfo destination protocol" msgstr "Windows-migratiegereedschap" #: standalone/drakvpn:973 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:987 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:994 #, fuzzy, c-format msgid "Lifetime number" msgstr "een nummer" #: standalone/drakvpn:995 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will be not proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples : \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1011 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will be not proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples : \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour ;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1029 standalone/drakvpn:1114 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "aanmeldingscontrole" #: standalone/drakvpn:1031 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "aanmeldingscontrole" #: standalone/drakvpn:1033 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1034 #, fuzzy, c-format msgid "deflate" msgstr "standaard" #: standalone/drakvpn:1041 #, fuzzy, c-format msgid "Remote" msgstr "Verwijderen" #: standalone/drakvpn:1042 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples : \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1050 #, fuzzy, c-format msgid "Exchange mode" msgstr "Inbel mode" #: standalone/drakvpn:1052 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1058 #, fuzzy, c-format msgid "Generate policy" msgstr "Veiligheid" #: standalone/drakvpn:1059 standalone/drakvpn:1075 standalone/drakvpn:1088 #, c-format msgid "off" msgstr "" #: standalone/drakvpn:1059 standalone/drakvpn:1075 standalone/drakvpn:1088 #, fuzzy, c-format msgid "on" msgstr "Omlaag" #: standalone/drakvpn:1060 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1074 #, fuzzy, c-format msgid "Passive" msgstr "Palestina" #: standalone/drakvpn:1076 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1079 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1081 #, fuzzy, c-format msgid "My certfile" msgstr "Selecteer bestand" #: standalone/drakvpn:1082 #, fuzzy, c-format msgid "Name of the certificate" msgstr "Naam van de printer" #: standalone/drakvpn:1083 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1084 #, fuzzy, c-format msgid "Name of the private key" msgstr "Naam van de printer" #: standalone/drakvpn:1085 #, fuzzy, c-format msgid "Peers certfile" msgstr "Selecteer bestand" #: standalone/drakvpn:1086 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1087 #, fuzzy, c-format msgid "Verify cert" msgstr "heel leuk" #: standalone/drakvpn:1089 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1091 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1092 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, fqdn,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier fqdn string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples : \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1112 #, fuzzy, c-format msgid "Peers identifier" msgstr "Printer" #: standalone/drakvpn:1113 #, fuzzy, c-format msgid "Proposal" msgstr "Protocol" #: standalone/drakvpn:1115 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of following: \n" "\n" "des, 3des, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1122 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1123 #, fuzzy, c-format msgid "Authentication method" msgstr "aanmeldingscontrole" #: standalone/drakvpn:1124 #, fuzzy, c-format msgid "DH group" msgstr "Groep" #: standalone/drakvpn:1131 #, fuzzy, c-format msgid "Command" msgstr "Opdrachtregel" #: standalone/drakvpn:1132 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1133 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1134 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Europees protocol" #: standalone/drakvpn:1134 standalone/drakvpn:1141 #, fuzzy, c-format msgid "any" msgstr "Dag" #: standalone/drakvpn:1136 #, fuzzy, c-format msgid "Flag" msgstr "Vlaggen" #: standalone/drakvpn:1137 #, fuzzy, c-format msgid "Direction" msgstr "Beschrijving" #: standalone/drakvpn:1138 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1138 #, fuzzy, c-format msgid "ipsec" msgstr "Msec" #: standalone/drakvpn:1138 #, fuzzy, c-format msgid "discard" msgstr "uitgeschakeld" #: standalone/drakvpn:1141 #, fuzzy, c-format msgid "Mode" msgstr "Model" #: standalone/drakvpn:1141 #, fuzzy, c-format msgid "tunnel" msgstr "Kanaal" #: standalone/drakvpn:1141 #, fuzzy, c-format msgid "transport" msgstr "overgebracht" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "Source/destination" msgstr "Werkstation" #: standalone/drakvpn:1144 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1144 #, fuzzy, c-format msgid "use" msgstr "Muis" #: standalone/drakvpn:1144 #, fuzzy, c-format msgid "unique" msgstr "Martinique" #: standalone/drakxtv:46 #, c-format msgid "USA (broadcast)" msgstr "VS (uitzending)" #: standalone/drakxtv:46 #, c-format msgid "USA (cable)" msgstr "VS (kabel)" #: standalone/drakxtv:46 #, c-format msgid "USA (cable-hrc)" msgstr "VS (kabel-hrc)" #: standalone/drakxtv:46 #, c-format msgid "Canada (cable)" msgstr "Canada (kabel)" #: standalone/drakxtv:47 #, c-format msgid "Japan (broadcast)" msgstr "Japan (uitzending)" #: standalone/drakxtv:47 #, c-format msgid "Japan (cable)" msgstr "Japan (kabel)" #: standalone/drakxtv:47 #, c-format msgid "China (broadcast)" msgstr "China (uitzending)" #: standalone/drakxtv:48 #, c-format msgid "West Europe" msgstr "West-Europa" #: standalone/drakxtv:48 #, c-format msgid "East Europe" msgstr "Oost-Europa" #: standalone/drakxtv:48 #, c-format msgid "France [SECAM]" msgstr "Frankrijk [SECAM]" #: standalone/drakxtv:49 #, c-format msgid "Newzealand" msgstr "Nieuw-Zeeland" #: standalone/drakxtv:52 #, c-format msgid "Australian Optus cable TV" msgstr "Australische Optus kabel-TV" #: standalone/drakxtv:84 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Gelieve uw\n" "TV-norm en land in te geven" #: standalone/drakxtv:86 #, c-format msgid "TV norm:" msgstr "TV norm :" #: standalone/drakxtv:87 #, c-format msgid "Area:" msgstr "Gebied :" #: standalone/drakxtv:91 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Zoeken naar TV-kanalen is bezig..." #: standalone/drakxtv:101 #, c-format msgid "Scanning for TV channels" msgstr "Zoeken naar TV-kanalen" #: standalone/drakxtv:105 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Er is een fout opgetreden tijdens het zoeken naar TV-kanalen" #: standalone/drakxtv:106 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV is niet geïnstalleerd!" #: standalone/drakxtv:109 #, c-format msgid "Have a nice day!" msgstr "Een goedendag verder!" #: standalone/drakxtv:110 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Nu kunt U xawtv uitvoeren (vanuit X) !\n" #: standalone/drakxtv:131 #, c-format msgid "No TV Card detected!" msgstr "Geen TV-kaart gevonden!" #: standalone/drakxtv:132 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Er was geen TV kaart gevonden. Gaat u na dat er een Video/TV kaart met Linux-" "ondersteuning correct aangesloten is.\n" "\n" "\n" "U kunt onze randapparatuur-database bereiken op:\n" "\n" "\n" "http://www.linux-mandrake.com/nl/hardware.php3" #: standalone/harddrake2:18 #, c-format msgid "Alternative drivers" msgstr "Alternatieve stuurprogramma's" #: standalone/harddrake2:19 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "de lijst van alternatieve stuurprogramma's voor deze geluidskaart" #: standalone/harddrake2:22 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "de fysieke bus waarmee het apparaat verbonden is (bijv. PCI, USB, ...)" #: standalone/harddrake2:23 #, c-format msgid "Channel" msgstr "Kanaal" #: standalone/harddrake2:23 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI-kanaal" #: standalone/harddrake2:24 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:24 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "De GNU/Linux kernel draait een berekeningslus tijdens het opstarten om een " "tijdsteller te initialiseren. Het resultaat is opgeslagen als \"bogomips\" " "om de prestaties van de CVE te meten (\"benchmark\")." #: standalone/harddrake2:26 #, c-format msgid "Bus identification" msgstr "Bus-identificatie" #: standalone/harddrake2:27 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- PCI- en USB-apparaten: dit somt de PCI/USB id's van leverancier, apparaat, " "subleverancier en subapparaat op" #: standalone/harddrake2:30 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- pci-apparaten: dit geeft het PCI-slot, apparaat en functie van deze kaart\n" "- eide-apparaten: het apparaat is of een slave- of een master-apparaat\n" "- scsi-apparaten: de scsi-bus en de scsi-apparaat-ID's" #: standalone/harddrake2:33 #, c-format msgid "Cache size" msgstr "Cachegrootte" #: standalone/harddrake2:33 #, c-format msgid "size of the (second level) cpu cache" msgstr "grootte van de (secundair niveau) processorcache" #: standalone/harddrake2:34 #, c-format msgid "Drive capacity" msgstr "Schijfcapaciteit" #: standalone/harddrake2:34 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" "speciale stuurprogrammacapaciteiten (brandfunctie en/of DVD-ondersteuning)" #: standalone/harddrake2:36 #, c-format msgid "Coma bug" msgstr "Coma-bug" #: standalone/harddrake2:36 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "of deze processor de Cyrix 6x86 Coma bug heeft" #: standalone/harddrake2:37 #, c-format msgid "Cpuid family" msgstr "Cpuid-familie" #: standalone/harddrake2:37 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "familie van de processor (bijv. 6 voor i686-klasse)" #: standalone/harddrake2:38 #, c-format msgid "Cpuid level" msgstr "Cpuid-niveau" #: standalone/harddrake2:38 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "informatieniveau dat bereikt kan worden door de cpuid-instructie" #: standalone/harddrake2:39 #, c-format msgid "Frequency (MHz)" msgstr "Frequentie (MHz)" #: standalone/harddrake2:39 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "de CVE-frequentie in MHz (Megaherz welke in eerste benadering grofweg kan " "worden bepaald aan de hand van het aantal instructies welke de processor kan " "uitvoeren per seconde)" #: standalone/harddrake2:40 #, c-format msgid "this field describes the device" msgstr "Dit veld omschrijft het apparaat" #: standalone/harddrake2:41 #, c-format msgid "Old device file" msgstr "Ouderwets apparaatbestand" #: standalone/harddrake2:42 #, c-format msgid "old static device name used in dev package" msgstr "oude statische apparaatnaam gebruikt in dev-pakket" #: standalone/harddrake2:43 #, c-format msgid "New devfs device" msgstr "Nieuw devfs-apparaat" #: standalone/harddrake2:44 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "nieuwe dynamische naam gegenereerd door devfs in de kernel" #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "Module" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "de GNU/Linux-kernelmodule die dat apparaat aanstuurt" #: standalone/harddrake2:47 #, c-format msgid "Flags" msgstr "Vlaggen" #: standalone/harddrake2:47 #, c-format msgid "CPU flags reported by the kernel" msgstr "Processorvlaggen door kernel gerapporteerd" #: standalone/harddrake2:48 #, c-format msgid "Fdiv bug" msgstr "Fdiv-fout" #: standalone/harddrake2:49 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Vroege Intel Pentium chips hebben een fout in hun drijvende komma-processor " "die niet de vereiste precisie bereikte bij het uitvoeren van een drijvende " "komma-deling (FDIV)" #: standalone/harddrake2:50 #, c-format msgid "Is FPU present" msgstr "Is FPU aanwezig" #: standalone/harddrake2:50 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "ja betekent dat de processor een mathematische coprocessor heeft" #: standalone/harddrake2:51 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Of de FPU een irq-vector heeft" #: standalone/harddrake2:51 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" "ja betekent dat de mathematische coprocessor een uitzonderingsvector " "aangekoppeld heeft" #: standalone/harddrake2:52 #, c-format msgid "F00f bug" msgstr "F00f-fout" #: standalone/harddrake2:52 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "vroege Pentiums hadden fouten en liepen vast bij het decoderen van de F00F-" "bytecode" #: standalone/harddrake2:53 #, c-format msgid "Halt bug" msgstr "Halt-fout" #: standalone/harddrake2:54 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Sommige vroege i486DX-100 chips kunnen niet betrouwbaar terugkeren naar " "operationele modus nadat de \"halt\"-instructie gebruikt is" #: standalone/harddrake2:56 #, c-format msgid "Floppy format" msgstr "Disketteformaat" #: standalone/harddrake2:56 #, c-format msgid "format of floppies supported by the drive" msgstr "disketteformaten die het station ondersteunt" #: standalone/harddrake2:57 #, c-format msgid "sub generation of the cpu" msgstr "Subgeneratie van de processor" #: standalone/harddrake2:58 #, c-format msgid "class of hardware device" msgstr "apparaatklasse" #: standalone/harddrake2:59 standalone/harddrake2:60 #: standalone/printerdrake:212 #, c-format msgid "Model" msgstr "Model" #: standalone/harddrake2:59 #, c-format msgid "hard disk model" msgstr "model harde schijf" #: standalone/harddrake2:60 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "processorgeneratie (bijv: 8 voor Pentium III, ...)" #: standalone/harddrake2:61 #, c-format msgid "Model name" msgstr "Modelnaam" #: standalone/harddrake2:61 #, c-format msgid "official vendor name of the cpu" msgstr "officiële leveranciernaam van de processor" #: standalone/harddrake2:62 #, c-format msgid "Number of buttons" msgstr "Aantal knoppen" #: standalone/harddrake2:62 #, c-format msgid "the number of buttons the mouse has" msgstr "het aantal knoppen dat de muis heeft" #: standalone/harddrake2:63 #, c-format msgid "the name of the CPU" msgstr "de CVE-naam" #: standalone/harddrake2:64 #, c-format msgid "network printer port" msgstr "poort van de netwerkprinter" #: standalone/harddrake2:65 #, c-format msgid "Processor ID" msgstr "Processor-ID" #: standalone/harddrake2:65 #, c-format msgid "the number of the processor" msgstr "het nummer van de processor" #: standalone/harddrake2:66 #, c-format msgid "Model stepping" msgstr "Model-stepping" #: standalone/harddrake2:66 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "processorstepping (submodel (generatie-)nummer)" #: standalone/harddrake2:67 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "het type bus waaraan uw muis is verbonden" #: standalone/harddrake2:68 #, c-format msgid "the vendor name of the device" msgstr "de fabrikantnaam van dit apparaat" #: standalone/harddrake2:69 #, c-format msgid "the vendor name of the processor" msgstr "de leveranciernaam van de processor" #: standalone/harddrake2:70 #, c-format msgid "Write protection" msgstr "Schrijfbescherming" #: standalone/harddrake2:70 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "de WP-vlag in het CR0 register van de CVE dwingt schrijfbescherming af op " "memory page-niveau, en stelt de processor zo in staat ongecontroleerde " "kerneltoegang tot user-geheugen te voorkomen (oftewel dit helpt tegen bugs)" #: standalone/harddrake2:84 standalone/logdrake:78 standalone/printerdrake:146 #: standalone/printerdrake:159 #, c-format msgid "/_Options" msgstr "/_Opties" #: standalone/harddrake2:85 standalone/harddrake2:106 standalone/logdrake:80 #: standalone/printerdrake:171 standalone/printerdrake:172 #: standalone/printerdrake:173 standalone/printerdrake:174 #, c-format msgid "/_Help" msgstr "/_Hulp" #: standalone/harddrake2:89 #, c-format msgid "/Autodetect _printers" msgstr "/_Printers automatisch bespeuren" #: standalone/harddrake2:90 #, c-format msgid "/Autodetect _modems" msgstr "/_Modems automatisch bespeuren" #: standalone/harddrake2:91 #, c-format msgid "/Autodetect _jaz drives" msgstr "/_Jaz-stations automatisch bespeuren" #: standalone/harddrake2:98 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "/_Afsluiten" #: standalone/harddrake2:107 #, c-format msgid "/_Fields description" msgstr "/Omschrijving _velden" #: standalone/harddrake2:109 #, c-format msgid "Harddrake help" msgstr "Harddrake hulp" #: standalone/harddrake2:110 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Beschrijving van de velden:\n" "\n" #: standalone/harddrake2:115 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Wanneer u een apparaat heeft geselecteerd, kunt u de informatie erover zien " "in de velden in het rechterkader (\"Informatie\")" #: standalone/harddrake2:120 standalone/printerdrake:173 #, c-format msgid "/_Report Bug" msgstr "/_Rapporteer Bug" #: standalone/harddrake2:121 standalone/printerdrake:174 #, c-format msgid "/_About..." msgstr "/_Info over..." #: standalone/harddrake2:122 #, c-format msgid "About Harddrake" msgstr "Info over Harddrake" #: standalone/harddrake2:124 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Dit is HardDrake, een Mandrake hardware configuratie-tool.\n" "Versie: %s\n" "Auteur: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: standalone/harddrake2:141 #, c-format msgid "Harddrake2 version %s" msgstr "Harddrake2 versie %s" #: standalone/harddrake2:157 #, c-format msgid "Detected hardware" msgstr "Gevonden randapparatuur" #: standalone/harddrake2:162 #, c-format msgid "Configure module" msgstr "Module configureren" #: standalone/harddrake2:169 #, c-format msgid "Run config tool" msgstr "Config-programma starten" #: standalone/harddrake2:216 #, c-format msgid "unknown" msgstr "onbekend" #: standalone/harddrake2:217 #, c-format msgid "Unknown" msgstr "Onbekend" #: standalone/harddrake2:235 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Klik op een apparaat in de boomstructuur links om informatie erover hier " "weer te geven." #: standalone/harddrake2:286 #, c-format msgid "secondary" msgstr "secundaire" #: standalone/harddrake2:286 #, c-format msgid "primary" msgstr "primaire" #: standalone/harddrake2:294 #, c-format msgid "burner" msgstr "brander" #: standalone/harddrake2:294 #, c-format msgid "DVD" msgstr "DVD" #: standalone/keyboarddrake:24 #, c-format msgid "Please, choose your keyboard layout." msgstr "Wat is uw toetsenbord-layout?" #: standalone/keyboarddrake:33 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Wenst u dat de BackSpace toets Delete geeft in het terminalvenster?" #: standalone/localedrake:60 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "De wijziging is gemaakt, maar u moet zich afmelden voordat het effect heeft" #: standalone/logdrake:51 #, c-format msgid "Mandrake Tools Logs" msgstr "Logboek van Mandrake-hulpprogramma's" #: standalone/logdrake:52 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:65 #, c-format msgid "Show only for the selected day" msgstr "Alleen tonen voor de geselecteerde dag" #: standalone/logdrake:72 #, c-format msgid "/File/_New" msgstr "/Bestand/_Nieuw" #: standalone/logdrake:72 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:73 #, c-format msgid "/File/_Open" msgstr "/Bestand/_Openen" #: standalone/logdrake:73 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:74 #, c-format msgid "/File/_Save" msgstr "/Bestand/O_pslaan" #: standalone/logdrake:74 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:75 #, c-format msgid "/File/Save _As" msgstr "/Bestand/Ops_laan als..." #: standalone/logdrake:76 #, c-format msgid "/File/-" msgstr "/Bestand/-" #: standalone/logdrake:79 #, c-format msgid "/Options/Test" msgstr "/Opties/Test" #: standalone/logdrake:81 #, c-format msgid "/Help/_About..." msgstr "/Hulp/_Info..." #: standalone/logdrake:110 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:113 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:117 #, c-format msgid "search" msgstr "zoeken" #: standalone/logdrake:129 #, c-format msgid "A tool to monitor your logs" msgstr "Een hulpprogramma om uw logboeken te volgen" #: standalone/logdrake:130 standalone/net_monitor:85 #, c-format msgid "Settings" msgstr "Instellingen" #: standalone/logdrake:135 #, c-format msgid "Matching" msgstr "Overeenkomend" #: standalone/logdrake:136 #, c-format msgid "but not matching" msgstr "maar komt niet overeen met" #: standalone/logdrake:140 #, c-format msgid "Choose file" msgstr "Kies een bestand" #: standalone/logdrake:149 #, c-format msgid "Calendar" msgstr "Kalender" #: standalone/logdrake:159 #, c-format msgid "Content of the file" msgstr "Inhoud van het bestand" #: standalone/logdrake:163 standalone/logdrake:429 #, c-format msgid "Mail alert" msgstr "Waarschuwing via e-mail" #: standalone/logdrake:170 #, c-format msgid "The alert wizard had unexpectly failled:" msgstr "" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "even geduld, bezig met ontleden van bestand: %s" #: standalone/logdrake:406 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache World Wide Web Server" #: standalone/logdrake:407 #, c-format msgid "Domain Name Resolver" msgstr "Domeinnaam-opzoeker" #: standalone/logdrake:408 #, c-format msgid "Ftp Server" msgstr "FTP-server" #: standalone/logdrake:409 #, c-format msgid "Postfix Mail Server" msgstr "Postfix e-mailserver" #: standalone/logdrake:410 #, c-format msgid "Samba Server" msgstr "Samba-server" #: standalone/logdrake:411 #, c-format msgid "SSH Server" msgstr "SSH-server" #: standalone/logdrake:412 #, c-format msgid "Webmin Service" msgstr "Webmin-dienst" #: standalone/logdrake:413 #, c-format msgid "Xinetd Service" msgstr "Xinetd-dienst" #: standalone/logdrake:424 #, c-format msgid "Configure the mail alert system" msgstr "E-mail-waarschuwingssysteem configureren" #: standalone/logdrake:425 #, c-format msgid "Stop the mail alert system" msgstr "E-mail-waarschuwingssysteem stoppen" #: standalone/logdrake:432 #, c-format msgid "Mail alert configuration" msgstr "Configuratie van waarschuwing per e-mail" #: standalone/logdrake:433 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Welkom bij het e-mail configuratieprogramma.\n" "\n" "Hier kunt u het waarschuwingssysteem instellen.\n" #: standalone/logdrake:436 #, c-format msgid "What do you want to do?" msgstr "Wat wilt u doen?" #: standalone/logdrake:443 #, c-format msgid "Services settings" msgstr "Diensten-instellingen" #: standalone/logdrake:444 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" "U zult een waarschuwing ontvangen wanneer één van de geselecteerde diensten " "niet meer actief is" #: standalone/logdrake:451 #, c-format msgid "Load setting" msgstr "Belastinginstelling" #: standalone/logdrake:452 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" "U zult een waarschuwing ontvangen indien de processorbelasting hoger is dan " "deze waarde" #: standalone/logdrake:453 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Belasting" #: standalone/logdrake:458 #, c-format msgid "Alert configuration" msgstr "Waarschuwingsconfiguratie" #: standalone/logdrake:459 #, c-format msgid "Please enter your email address below " msgstr "Voert u alstublieft hieronder uw e-mailadres in" #: standalone/logdrake:460 #, c-format msgid "and enter the name (or the IP) of the SMTP server you whish to use" msgstr "en geef de naam (of het IP) van de te gebruiken SMTP-server" #: standalone/logdrake:479 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "De wizard heeft de e-mailwaarschuwing met succes geconfigureerd." #: standalone/logdrake:485 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "De wizard heeft de e-mailwaarschuwing met succes uitgeschakeld." #: standalone/logdrake:544 #, c-format msgid "Save as.." msgstr "Opslaan als..." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Welk type muis heeft u?" #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Derde knop nabootsen?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Muistest" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Test uw muis alstublieft:" #: standalone/net_monitor:51 standalone/net_monitor:56 #, c-format msgid "Network Monitoring" msgstr "Netwerk volgen" #: standalone/net_monitor:91 #, c-format msgid "Global statistics" msgstr "Globale statistieken" #: standalone/net_monitor:94 #, c-format msgid "Instantaneous" msgstr "Ogenblikkelijk" #: standalone/net_monitor:94 #, c-format msgid "Average" msgstr "Gemiddeld" #: standalone/net_monitor:95 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "Verzend\n" "snelheid:" #: standalone/net_monitor:96 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "Ontvangst\n" "snelheid:" #: standalone/net_monitor:99 #, c-format msgid "" "Connection\n" "time: " msgstr "" "Verbindings-\n" "tijd: " #: standalone/net_monitor:121 #, c-format msgid "Wait please, testing your connection..." msgstr "Even geduld, bezig met testen van uw verbinding..." #: standalone/net_monitor:149 standalone/net_monitor:162 #, c-format msgid "Disconnecting from Internet " msgstr "Bezig met internetverbinding verbreken " #: standalone/net_monitor:149 standalone/net_monitor:162 #, c-format msgid "Connecting to Internet " msgstr "Bezig met verbinden met het Internet " #: standalone/net_monitor:193 #, c-format msgid "Disconnection from Internet failed." msgstr "Internetverbinding verbreken mislukt." #: standalone/net_monitor:194 #, c-format msgid "Disconnection from Internet complete." msgstr "Internetverbinding verbreken voltooid." #: standalone/net_monitor:196 #, c-format msgid "Connection complete." msgstr "Verbinding voltooid." #: standalone/net_monitor:197 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "Verbinding mislukt.\n" "Controleer uw configuratie in het Mandrake Configuratiecentrum." #: standalone/net_monitor:295 #, c-format msgid "Color configuration" msgstr "Kleurenconfiguratie" #: standalone/net_monitor:343 standalone/net_monitor:363 #, c-format msgid "sent: " msgstr "verzonden: " #: standalone/net_monitor:350 standalone/net_monitor:367 #, c-format msgid "received: " msgstr "ontvangen: " #: standalone/net_monitor:357 #, c-format msgid "average" msgstr "gemiddelde" #: standalone/net_monitor:360 #, c-format msgid "Local measure" msgstr "Lokaal gemeten" #: standalone/net_monitor:392 #, c-format msgid "transmitted" msgstr "overgebracht" #: standalone/net_monitor:393 #, c-format msgid "received" msgstr "ontvangen" #: standalone/net_monitor:411 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Waarschuwing: een andere internetverbinding is bespeurd, misschien gebruikt " "deze uw netwerk." #: standalone/net_monitor:417 #, c-format msgid "Disconnect %s" msgstr "Verbinding %s verbreken" #: standalone/net_monitor:417 #, c-format msgid "Connect %s" msgstr "%s verbinden" #: standalone/net_monitor:422 #, c-format msgid "No internet connection configured" msgstr "Geen internetverbinding geconfigureerd" #: standalone/printerdrake:70 #, c-format msgid "Loading printer configuration... Please wait" msgstr "Laden van printerconfiguratie... Even geduld" #: standalone/printerdrake:86 #, c-format msgid "Reading data of installed printers..." msgstr "Bezig met lezen van gegevens van geïnstalleerde printers..." #: standalone/printerdrake:129 #, c-format msgid "%s Printer Management Tool" msgstr "%s Printerbeheer" #: standalone/printerdrake:143 standalone/printerdrake:144 #: standalone/printerdrake:145 standalone/printerdrake:153 #: standalone/printerdrake:154 standalone/printerdrake:158 #, c-format msgid "/_Actions" msgstr "/_Acties" #: standalone/printerdrake:143 #, c-format msgid "/Set as _Default" msgstr "/Als _standaard instellen" #: standalone/printerdrake:144 #, c-format msgid "/_Edit" msgstr "/Be_werken" #: standalone/printerdrake:145 #, c-format msgid "/_Delete" msgstr "/_Verwijderen" #: standalone/printerdrake:146 #, c-format msgid "/_Expert mode" msgstr "/_Expert-modus" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "/_Vernieuwen" #: standalone/printerdrake:154 #, c-format msgid "/_Add Printer" msgstr "/_Printer toevoegen" #: standalone/printerdrake:158 #, c-format msgid "/_Configure CUPS" msgstr "/_CUPS configureren" #: standalone/printerdrake:191 #, c-format msgid "Search:" msgstr "Zoeken:" #: standalone/printerdrake:194 #, c-format msgid "Apply filter" msgstr "Filter toepassen" #: standalone/printerdrake:212 standalone/printerdrake:219 #, c-format msgid "Def." msgstr "Std." #: standalone/printerdrake:212 standalone/printerdrake:219 #, c-format msgid "Printer Name" msgstr "Printernaam" #: standalone/printerdrake:212 #, c-format msgid "Connection Type" msgstr "Verbindingstype" #: standalone/printerdrake:219 #, c-format msgid "Server Name" msgstr "Servernaam" #: standalone/printerdrake:225 #, c-format msgid "Add Printer" msgstr "Printer toevoegen" #: standalone/printerdrake:225 #, c-format msgid "Add a new printer to the system" msgstr "Nieuwe printer toevoegen aan het systeem" #: standalone/printerdrake:227 #, c-format msgid "Set as default" msgstr "Als standaard instellen" #: standalone/printerdrake:227 #, c-format msgid "Set selected printer as the default printer" msgstr "Deze printer instellen als standaardprinter" #: standalone/printerdrake:229 #, c-format msgid "Edit selected printer" msgstr "Geselecteerde printer bewerken" #: standalone/printerdrake:231 #, c-format msgid "Delete selected printer" msgstr "Geselecteerde printer verwijderen" #: standalone/printerdrake:233 #, c-format msgid "Refresh" msgstr "Verversen" #: standalone/printerdrake:233 #, c-format msgid "Refresh the list" msgstr "De lijst verversen" #: standalone/printerdrake:235 #, c-format msgid "Configure CUPS" msgstr "CUPS configureren" #: standalone/printerdrake:235 #, c-format msgid "Configure CUPS printing system" msgstr "CUPS afdruksysteem configureren" #: standalone/printerdrake:521 #, c-format msgid "Authors: " msgstr "Auteurs: " #: standalone/printerdrake:527 #, c-format msgid "Printer Management \n" msgstr "Printerbeheer \n" #: standalone/scannerdrake:50 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "SANE-pakketten moet geïnstalleerd zijn om scanners te kunnen gebruiken.\n" "\n" "Wilt u de SANE-pakketten installeren?" #: standalone/scannerdrake:54 #, c-format msgid "Aborting Scannerdrake." msgstr "Scannerdrake afbreken..." #: standalone/scannerdrake:59 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Kan de benodigde pakketten om een scanner in te stellen niet installeren." #: standalone/scannerdrake:60 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdrake wordt nu niet gestart." #: standalone/scannerdrake:66 standalone/scannerdrake:459 #, c-format msgid "Searching for configured scanners ..." msgstr "Bezig met zoeken naar geconfigureerde scanners..." #: standalone/scannerdrake:70 standalone/scannerdrake:463 #, c-format msgid "Searching for new scanners ..." msgstr "Bezig met zoeken naar nieuwe scanners..." #: standalone/scannerdrake:78 standalone/scannerdrake:485 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Bezig met hergenereren van lijst geconfigureerde scanners..." #: standalone/scannerdrake:100 standalone/scannerdrake:141 #: standalone/scannerdrake:155 #, c-format msgid "The %s is not supported by this version of %s." msgstr "De %s wordt niet ondersteund in deze versie van %s." #: standalone/scannerdrake:103 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s gevonden op %s, deze automatisch configureren?" #: standalone/scannerdrake:115 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s is niet in de scanner-database, handmatig configureren?" #: standalone/scannerdrake:130 #, c-format msgid "Select a scanner model" msgstr "Selecteer een scannermodel" #: standalone/scannerdrake:131 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:132 #, c-format msgid "Detected model: %s" msgstr "Gevonden model: %s" #: standalone/scannerdrake:134 #, c-format msgid ", " msgstr ", " #: standalone/scannerdrake:135 #, c-format msgid "Port: %s" msgstr "Poort: %s" #: standalone/scannerdrake:161 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "De %s is niet bekend in deze versie van Scannerdrake." #: standalone/scannerdrake:169 standalone/scannerdrake:183 #, c-format msgid "Do not install firmware file" msgstr "Firmware-bestand niet installeren" #: standalone/scannerdrake:173 standalone/scannerdrake:225 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" "Het is mogelijk dat uw %s zijn firmware nodig heeft, iedere keer wanneer hij " "wordt aangezet." #: standalone/scannerdrake:174 standalone/scannerdrake:226 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "Als dit het geval is, kunt u dit automatisch laten doen." #: standalone/scannerdrake:175 standalone/scannerdrake:229 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" "Om dit te doen, dient u het firmware-bestand voor uw scanner op te geven " "zodat het geïnstalleerd kan worden." #: standalone/scannerdrake:176 standalone/scannerdrake:230 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "U kunt het bestand vinden op de CD of diskette die bij uw scanner zit, op de " "homepage van de fabrikant, of op uw Windows-partitie." #: standalone/scannerdrake:178 standalone/scannerdrake:237 #, c-format msgid "Install firmware file from" msgstr "Firmware-bestand installeren vanaf" #: standalone/scannerdrake:198 #, c-format msgid "Select firmware file" msgstr "Selecteer firmware-bestand" #: standalone/scannerdrake:201 standalone/scannerdrake:260 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "Het firmware-bestand %s bestaat niet of is onleesbaar!" #: standalone/scannerdrake:224 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" "Mogelijkerwijs is hebben uw scanners elke keer dat ze aangezet worden, hun " "firmware nodig." #: standalone/scannerdrake:228 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" "Om dit te doen, dient u de firmware-bestanden voor uw scanner op te geven " "zodat ze geïnstalleerd kunnen worden." #: standalone/scannerdrake:231 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" "Als u de firmware van uw scanner reeds geïnstalleerd heeft dat kunt u de " "firmware hier bijwerken door het nieuwe firmware-bestand op te geven." #: standalone/scannerdrake:233 #, c-format msgid "Install firmware for the" msgstr "Firmware installeren voor de" #: standalone/scannerdrake:256 #, c-format msgid "Select firmware file for the %s" msgstr "Selecteer firmware-bestand voor de %s" #: standalone/scannerdrake:282 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "Het firmware-bestand voor uw %s is succesvol geïnstalleerd." #: standalone/scannerdrake:292 #, c-format msgid "The %s is unsupported" msgstr "De %s is niet ondersteund" #: standalone/scannerdrake:297 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "De %s dient geconfigureerd te worden met printerdrake.\n" "U kunt printerdrake opstarten vanuit het %s Configuratiecentrum in het " "Apparatuur-onderdeel." #: standalone/scannerdrake:301 standalone/scannerdrake:308 #: standalone/scannerdrake:338 #, c-format msgid "Auto-detect available ports" msgstr "Beschikbare poorten automatisch bespeuren" #: standalone/scannerdrake:303 standalone/scannerdrake:349 #, c-format msgid "Please select the device where your %s is attached" msgstr "Selecteer het apparaat waar uw %s op aangesloten is." #: standalone/scannerdrake:304 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Merk op: Parallelle poorten kunnen niet automatisch bespeurd worden)" #: standalone/scannerdrake:306 standalone/scannerdrake:351 #, c-format msgid "choose device" msgstr "kies apparaat" #: standalone/scannerdrake:340 #, c-format msgid "Searching for scanners ..." msgstr "Bezig met zoeken naar scanners..." #: standalone/scannerdrake:375 #, fuzzy, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "Uw %s is geconfigureerd.\n" "U kunt nu documenten scannen met \"XSane\" via Multimedia/Grafisch in het " "toepassingenmenu." #: standalone/scannerdrake:399 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "De volgende scanners\n" "\n" "%s\n" "zijn beschikbaar op uw computer.\n" #: standalone/scannerdrake:400 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "De volgende scanner\n" "\n" "%s\n" "beschikbaar op uw computer.\n" #: standalone/scannerdrake:403 standalone/scannerdrake:406 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Er zijn geen scanners gevonden die beschikbaar zijn op uw computer.\n" #: standalone/scannerdrake:420 #, c-format msgid "Search for new scanners" msgstr "Zoeken naar nieuwe scanners" #: standalone/scannerdrake:426 #, c-format msgid "Add a scanner manually" msgstr "Handmatig een scanner toevoegen" #: standalone/scannerdrake:433 #, c-format msgid "Install/Update firmware files" msgstr "Firmware-bestanden installeren/verversen" #: standalone/scannerdrake:439 #, c-format msgid "Scanner sharing" msgstr "Scanners delen" #: standalone/scannerdrake:498 standalone/scannerdrake:663 #, c-format msgid "All remote machines" msgstr "Alle computers op afstand" #: standalone/scannerdrake:510 standalone/scannerdrake:813 #, c-format msgid "This machine" msgstr "Deze computer" #: standalone/scannerdrake:550 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Hier kunt u bepalen of de scanners verbonden aan deze computer toegankelijk " "dienen te zijn voor computers op afstand, en voor welke." #: standalone/scannerdrake:551 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Hier kunt u ook bepalen of scanners aan computers op afstand automatisch " "beschikbaar gemaakt dienen te worden op deze computer." #: standalone/scannerdrake:554 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "De scanners op deze computer zijn beschikbaar voor andere computers" #: standalone/scannerdrake:556 #, c-format msgid "Scanner sharing to hosts: " msgstr "Scanner delen met computers: " #: standalone/scannerdrake:570 #, c-format msgid "Use scanners on remote computers" msgstr "Scanners op afstandcomputers gebruiken" #: standalone/scannerdrake:573 #, c-format msgid "Use the scanners on hosts: " msgstr "Scanners op deze hosts gebruiken: " #: standalone/scannerdrake:600 standalone/scannerdrake:672 #: standalone/scannerdrake:822 #, c-format msgid "Sharing of local scanners" msgstr "Lokale scanners delen" #: standalone/scannerdrake:601 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Dit zijn de computers waarop de lokaal verbonden scanner(s) beschikbaar " "dienen te zijn:" #: standalone/scannerdrake:612 standalone/scannerdrake:762 #, c-format msgid "Add host" msgstr "Computer toevoegen" #: standalone/scannerdrake:618 standalone/scannerdrake:768 #, c-format msgid "Edit selected host" msgstr "Geselecteerde computer bewerken" #: standalone/scannerdrake:627 standalone/scannerdrake:777 #, c-format msgid "Remove selected host" msgstr "Geselecteerde computer verwijderen" #: standalone/scannerdrake:651 standalone/scannerdrake:659 #: standalone/scannerdrake:664 standalone/scannerdrake:710 #: standalone/scannerdrake:801 standalone/scannerdrake:809 #: standalone/scannerdrake:814 standalone/scannerdrake:860 #, c-format msgid "Name/IP address of host:" msgstr "Naam/IP-adres van computer:" #: standalone/scannerdrake:673 standalone/scannerdrake:823 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" "Kies de host waarop de lokale scanners beschikbaar moeten worden gemaakt:" #: standalone/scannerdrake:684 standalone/scannerdrake:834 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "U dient een hostnaam of een IP-adres in te voeren.\n" #: standalone/scannerdrake:695 standalone/scannerdrake:845 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" "Deze host staat reeds in de lijst, hij kan niet nogmaals worden toegevoegd.\n" #: standalone/scannerdrake:750 #, c-format msgid "Usage of remote scanners" msgstr "Gebruik van scanners op afstand" #: standalone/scannerdrake:751 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" "Dit zijn de computers waarvandaan de scanners gebruikt dienen te worden:" #: standalone/scannerdrake:908 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "saned moet geïnstalleerd zijn om de lokale scanner(s) te kunnen delen.\n" "\n" "Wilt u het `saned'-pakket installeren?" #: standalone/scannerdrake:912 standalone/scannerdrake:916 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Uw scanner(s) zullen niet beschikbaar zijn op het netwerk." #: standalone/service_harddrake:49 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Bepaalde apparaten in de apparatuurklasse \"%s\" zijn verwijderd:\n" #: standalone/service_harddrake:53 #, c-format msgid "Some devices were added: %s\n" msgstr "Enkele apparaten zijn toegevoegd: %s\n" #: standalone/service_harddrake:98 #, c-format msgid "Hardware probing in progress" msgstr "Afzoeken van apparatuur is gaande" #: steps.pm:14 #, c-format msgid "Language" msgstr "Taal" #: steps.pm:15 #, c-format msgid "License" msgstr "Licentie" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Muis configureren" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Harde schijf-detectie" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Installatieklasse selecteren" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Kies uw toetsenbord" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Partitionering" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Partities formatteren" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Te installeren pakketten kiezen" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Systeem installeren" #: steps.pm:25 #, c-format msgid "Root password" msgstr "Root-wachtwoord" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Gebruiker toevoegen" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Netwerkconfiguratie" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Opstartlader installeren" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "X configureren" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Diensten configureren" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Vernieuwingen ophalen" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Installatie afsluiten" #: ugtk2.pm:1075 #, c-format msgid "Is this correct?" msgstr "Is dit correct?" #: ugtk2.pm:1203 #, c-format msgid "Expand Tree" msgstr "Boom uitklappen" #: ugtk2.pm:1204 #, c-format msgid "Collapse Tree" msgstr "Boom inklappen" #: ugtk2.pm:1205 #, c-format msgid "Toggle between flat and group sorted" msgstr "Schakelen tussen gewoon en per-groep-gesorteerd" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s is niet geïnstalleerd\n" "Klik op \"Volgende\" om te installeren of \"Annuleren\" om af te sluiten" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Installatie mislukt" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Kantoorwerkstation" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Kantoorprogramma's: tekstverwerkers (kword, abiword), rekenbladen (kspread, " "gnumeric), PDF-lezers, etc" # #: ../../share/compssUsers:999 msgid "Game station" msgstr "Game-station" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Amusementsprogramma's: arcade, bordspellen, strategie etc" # #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimedia-station" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Geluids- en video-afspeel- en bewerkingsprogramma's" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Internet-station" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Verzameling programma's om e-mail en usenet nieuws mee te lezen en te " "schrijven, en om het Web mee door te bladeren" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Netwerk-computer (client)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Clients voor verschillende protcollen waaronder ssh" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Configuratie" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Programma's om de configuratie van uw computer te vergemakkelijken" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Hulpprogramma's voor de opdrachtregel" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Editors, shells, bestandsbeheer, terminals" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE werkstation" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "Het K Desktop Environment, de basis-grafische omgeving met een verzameling " "van bijbehorende programma's" #: ../../share/compssUsers:999 msgid "GNOME Workstation" msgstr "GNOME werkstation" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Een grafische omgeving met gebruikersvriendelijke verzameling toepassingen " "en bureaublad-programma's" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Andere grafische bureaubladen" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C and C++ ontwikkelingsbibliotheken, programma's en include-bestanden" # #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Documentatie" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Boeken en Howto's over Linux en Vrije Software" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standaard-Basis. Ondersteuning voor toepassingen van derden." #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Web/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "E-mail" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "Postfix e-mailserver" #: ../../share/compssUsers:999 msgid "Database" msgstr "Database" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL of MySQL database-server" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Firewall/Router" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internet gateway" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Netwerk-computer server" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS server, SMB server, Proxy server, ssh server" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Verzameling programma's om e-mail en usenet nieuws mee te lezen en te " "sturen, en om het Web mee door te bladeren" #~ msgid "Provider dns 1 (optional)" #~ msgstr "DNS 1 van uw provider (optioneel)" #~ msgid "Provider dns 2 (optional)" #~ msgstr "DNS 2 van uw provider (optioneel)" #~ msgid "Ethernet Card" #~ msgstr "Ethernet-kaart" #~ msgid "DHCP Client" #~ msgstr "DHCP Client" #~ msgid "Display" #~ msgstr "Weergeven" #~ msgid "Display configuration" #~ msgstr "Configuratie weergeven" #~ msgid "Use tar and bzip2 (rather than tar and gzip)" #~ msgstr "tar en bzip2 gebruiken (in plaats van tar en gzip)" #~ msgid "" #~ "Change\n" #~ "Restore Path" #~ msgstr "" #~ "Herstel-pad\n" #~ "veranderen" #~ msgid "European protocol" #~ msgstr "Europees protocol" #~ msgid "Found \"%s\" interface do you want to use it ?" #~ msgstr "\"%s\"-interface gevonden. Wilt u deze gebruiken? " #~ msgid "Bewan USB modem" #~ msgstr "Bewan USB modem" #~ msgid "What kind is your ISDN connection?" #~ msgstr "Wat voor een ISDN connectie heeft u?" #~ msgid "Do you want to start a new configuration ?" #~ msgstr "Wenst u met een nieuwe configuratie te beginnen?" #~ msgid "" #~ "I have detected an ISDN PCI card, but I don't know its type. Please " #~ "select a PCI card on the next screen." #~ msgstr "" #~ "Ik heb een ISDN PCI kaart gevonden, maar ik ken het merk niet. Selecteer " #~ "a.u.b. een PCI kaart op het volgende scherm." #~ msgid "No ISDN PCI card found. Please select one on the next screen." #~ msgstr "" #~ "Geen ISDN PCI kaart gevonden. Selecteer a.u.b. uw kaart op het volgende " #~ "scherm." #~ msgid "DrakTermServ" #~ msgstr "drakTermServ" #~ msgid "Under Devel ... please wait." #~ msgstr "In ontwikkeling ... nog even geduld." #~ msgid "Windows (FAT32)" #~ msgstr "Windows (FAT32) " #~ msgid "" #~ "Please enter the name of the interface connected to the " #~ "internet. \n" #~ " \n" #~ "Examples:\n" #~ " ppp+ for modem or DSL connections, \n" #~ " eth0, or eth1 for cable connection, \n" #~ " ippp+ for a isdn connection.\n" #~ msgstr "" #~ "Voer de naam in van het netwerkapparaat verbonden met\n" #~ "het internet.\n" #~ "\n" #~ "Voorbeelden:\n" #~ " ppp+ voor modem- of DSL-verbindingen, \n" #~ " eth0, of eth1 voor een kabelverbinding, \n" #~ " ippp+ voor een ISDN-verbinding.\n" #~ msgid "" #~ "This uses the same syntax as the command line program 'cdrecord'. " #~ "'cdrecord -scanbus' would also show you the device number." #~ msgstr "" #~ "Dit maakt gebruik van dezelfde syntax als het opdrachtregel-programma " #~ "'cdrecord'. 'cdrecord -scanbus' zou u ook het apparaatnummer tonen." #~ msgid "" #~ "Enter your CD Writer device name\n" #~ " ex: 0,1,0" #~ msgstr "" #~ "Voer de apparaatnaam van uw CD Writer in\n" #~ " Voorbeeld: 0,1,0" #~ msgid "Scientific Workstation" #~ msgstr "Wetenschappelijk werkstation" #~ msgid "Scientific applications such as gnuplot" #~ msgstr "Wetenschappelijke toepassingen zoals gnuplot" #~ msgid "DNS/NIS " #~ msgstr "DNS/NIS " #~ msgid "Domain Name and Network Information Server" #~ msgstr "Domeinnaam en Network Information Server" #, fuzzy #~ msgid "No wireless network adapter on your system!" #~ msgstr "Geen netwerk adapter op uw systeem!" #~ msgid "Can't create log file!" #~ msgstr "Kan logboekbestand niet creëren!" #, fuzzy #~ msgid "dhcp" #~ msgstr "DHCP gebruiken" #~ msgid "Please select media for backup..." #~ msgstr "Selecteer media voor de reservekopie" #, fuzzy #~ msgid "real_file" #~ msgstr "Selecteer bestand" #~ msgid "Configuration of a remote printer" #~ msgstr "Printer-op-afstand configureren" #~ msgid "Gnome Workstation" #~ msgstr "GNOME werkstation" #~ msgid "Running \"%s\" ..." #~ msgstr "\"%s\" is actief..." #~ msgid "utopia 25" #~ msgstr "utopia 25" #~ msgid "On Hard Drive" #~ msgstr "op harde schijf" #~ msgid "Messages" #~ msgstr "Meldingen" #~ msgid "Syslog" #~ msgstr "Syslog" #~ msgid "Compact" #~ msgstr "Compact"