# Korean translation of drakbootdisk. # Copyright (C) 2001 Free Software Foundation, Inc. # Jaegeum Choe , 2001. # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2002-12-05 19:52+0100\n" "PO-Revision-Date: 2002-09-09 09:08+0900\n" "Last-Translator: Jaegeum Cze \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=euc-kr\n" "Content-Transfer-Encoding: 8bit\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kB" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kB" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "16 MB 이상" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "X 서버 선택" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X 서버" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "다중 헤드 설정" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "님의 시스템은 다중 헤드 설정을 지원합니다.\n" "어떻게 하시겠습니까?" #: ../../Xconfig/card.pm_.c:288 msgid "Select the memory size of your graphics card" msgstr "그래픽 카드의 메모리 용량을 선택하세요" #: ../../Xconfig/card.pm_.c:349 msgid "XFree configuration" msgstr "XFree 설정" #: ../../Xconfig/card.pm_.c:351 msgid "Which configuration of XFree do you want to have?" msgstr "어느 XFree 설정을 선택하시겠습니까?" #: ../../Xconfig/card.pm_.c:383 msgid "Configure all heads independently" msgstr "모든 헤드를 독립적으로 설정" #: ../../Xconfig/card.pm_.c:384 msgid "Use Xinerama extension" msgstr "Xinerama 확장 사용" #: ../../Xconfig/card.pm_.c:389 #, c-format msgid "Configure only card \"%s\"%s" msgstr "「%s」%s 카드만 설정" #: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s를 사용한 3D 하드웨어 가속" #: ../../Xconfig/card.pm_.c:416 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "님의 카드는 어쩌면 보다 향상된 2D 성능을 보일 수 있는 XFree %s을 지원합니다." #: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "님의 카드는 XFree %s로 3D 하드웨어 가속기능을 지원합니다." #: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s를 사용한 실험적 3D 하드웨어 가속" #: ../../Xconfig/card.pm_.c:429 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "주의: 이것은 실험적인 지원이며 님의 컴퓨터를 멈추게 할 수 있습니다.\n" "님의 카드는 어쩌면 보다 향상된 2D 성능을 보일 수 있는 XFree %s을 지원합니다." #: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "님의 카드는 XFree %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n" "주의: 이것은 실험적인 지원이며 님의 컴퓨터를 멈추게 할 수 있습니다." #: ../../Xconfig/card.pm_.c:455 msgid "Xpmac (installation display driver)" msgstr "Xpmac (설치 표시 드라이버)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961 msgid "Custom" msgstr "사용자 정의" #: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "그래픽 카드" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "모니터" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210 msgid "Resolution" msgstr "해상도" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "테스트" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "옵션들" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269 #: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181 #: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015 #: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435 #: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949 msgid "Ok" msgstr "확인" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114 #: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204 msgid "Quit" msgstr "종료" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "변경사항을 저장할까요?\n" "현재 설정:\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "모니터를 선택하세요" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "플러그앤플레이" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "일반 마우스" #: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67 #: ../../standalone/harddrake2_.c:68 msgid "Vendor" msgstr "상표" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "" #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "수직 그리고 더욱 중요한 수평 주파수라는 두 개의 중요한 인자가 있습니다. 수직 " "주파수는 \n" "전체화면이 갱신되는 주기이며, 수평 주파수는 스캔라인들이 갱신되는 주기입니" "다.\n" "\n" "매우 중요: 님의 실제 모니터의 능력치를 넘어서는 모델을 선택하지 마세요: \n" "님의 모니터가 훼손될 수 있습니다.\n" "잘 모르겠다면, 안전하게 낮은 설정값을 선택하세요" #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "수평 주파수" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "수직 주파수" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 색상 (8 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "3만2천 색상 (15 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "6만5천 색상 (16 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "천6백만 색상 (24bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "40억 색상 (32 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:130 msgid "Resolutions" msgstr "해상도" #: ../../Xconfig/resolution_and_depth.pm_.c:255 msgid "Choose the resolution and the color depth" msgstr "해상도와 색상을 선택하세요" #: ../../Xconfig/resolution_and_depth.pm_.c:256 #, c-format msgid "Graphics card: %s" msgstr "그래픽 카드: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001 #: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055 #: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198 #: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907 #: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047 #: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104 #: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112 #: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286 #: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677 #: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918 #: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204 #: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295 #: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438 #: ../../ugtk2.pm_.c:926 msgid "Cancel" msgstr "취소" #: ../../Xconfig/test.pm_.c:29 msgid "Test of the configuration" msgstr "설정 테스트" #: ../../Xconfig/test.pm_.c:30 msgid "Do you want to test the configuration?" msgstr "이 설정을 테스트해 보시겠습니까?" #: ../../Xconfig/test.pm_.c:30 msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "키보드 형태: %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "마우스 종류: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "마우스 장치: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "모니터: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "모니터 수평주파수: %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "모니터 수직주파수: %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "그래픽 카드: %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "비디오 메모리: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "색상 심도: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "해상도: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 서버: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 드라이버: %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "시작시 바로 X 실행" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "부팅시에 자동으로 X윈도우가 시작되도록 할수 있습니다.\n" "다시 부팅했을때 자동으로 X윈도가 시작되길 원하세요?" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm_.c:85 msgid "What norm is your TV using?" msgstr "TV 카드가 어떤 놈을 사용합니까?" #: ../../any.pm_.c:107 ../../any.pm_.c:132 msgid "First sector of boot partition" msgstr "부트 파티션의 첫번째 섹터" #: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209 msgid "First sector of drive (MBR)" msgstr "드라이브의 첫번째 섹터(MBR)" #: ../../any.pm_.c:111 msgid "SILO Installation" msgstr "SILO 설치" #: ../../any.pm_.c:112 ../../any.pm_.c:125 msgid "Where do you want to install the bootloader?" msgstr "부트로더를 어디에 설치하고 싶으세요?" #: ../../any.pm_.c:124 msgid "LILO/grub Installation" msgstr "LILO/GRUB 설치" #: ../../any.pm_.c:136 ../../any.pm_.c:150 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:138 msgid "LILO with text menu" msgstr "텍스트 메뉴 LILO" #: ../../any.pm_.c:139 ../../any.pm_.c:150 msgid "LILO with graphical menu" msgstr "그래픽 메뉴 LILO" #: ../../any.pm_.c:142 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:146 msgid "Boot from DOS/Windows (loadlin)" msgstr "도스/윈도우즈에서 부팅(loadlin)" #: ../../any.pm_.c:148 ../../any.pm_.c:150 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:158 ../../any.pm_.c:189 msgid "Bootloader main options" msgstr "부트로더 주 옵션들" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader to use" msgstr "사용할 부트로더" #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "부트로더 설치" #: ../../any.pm_.c:163 ../../any.pm_.c:192 msgid "Boot device" msgstr "부트 장치" #: ../../any.pm_.c:164 msgid "Compact" msgstr "콤팩드 모드" #: ../../any.pm_.c:164 msgid "compact" msgstr "콤팩트 모드" #: ../../any.pm_.c:165 ../../any.pm_.c:289 msgid "Video mode" msgstr "비디오 모드" #: ../../any.pm_.c:167 msgid "Delay before booting default image" msgstr "기본 이미지로 부팅될 때까지 지연시간" #: ../../any.pm_.c:169 ../../any.pm_.c:772 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71 #: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916 #: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622 #: ../../standalone/drakconnect_.c:647 msgid "Password" msgstr "암호" #: ../../any.pm_.c:170 ../../any.pm_.c:773 #: ../../install_steps_interactive.pm_.c:1078 msgid "Password (again)" msgstr "암호 (확인)" #: ../../any.pm_.c:171 msgid "Restrict command line options" msgstr "명령행 옵션을 제한합니다." #: ../../any.pm_.c:171 msgid "restrict" msgstr "제한" #: ../../any.pm_.c:173 msgid "Clean /tmp at each boot" msgstr "부팅시 /tmp 디렉토리 자동 청소" #: ../../any.pm_.c:174 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "옵션: 정확한 메모리 용량 (%d MB 발견)" #: ../../any.pm_.c:176 msgid "Enable multi profiles" msgstr "다중 profiles 허용" #: ../../any.pm_.c:180 msgid "Give the ram size in MB" msgstr "메모리 용량를 MB로 입력하세요" #: ../../any.pm_.c:182 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "옵션: 「명령행 옵션제한」은 암호없이 사용될수 없습니다." #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../diskdrake/interactive.pm_.c:1204 #: ../../install_steps_interactive.pm_.c:1072 msgid "Please try again" msgstr "다시 시도하세요." #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../install_steps_interactive.pm_.c:1072 msgid "The passwords do not match" msgstr "암호가 일치하지 않습니다." #: ../../any.pm_.c:191 msgid "Init Message" msgstr "초기화 메시지" #: ../../any.pm_.c:193 msgid "Open Firmware Delay" msgstr "펌웨어 열기 지연" #: ../../any.pm_.c:194 msgid "Kernel Boot Timeout" msgstr "커널 부트 제한시간" #: ../../any.pm_.c:195 msgid "Enable CD Boot?" msgstr "CD 부팅 허용?" #: ../../any.pm_.c:196 msgid "Enable OF Boot?" msgstr "OF 부팅 허용?" #: ../../any.pm_.c:197 msgid "Default OS?" msgstr "기본 OS?" #: ../../any.pm_.c:231 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "몇 가지 항목이 여기에 표시되고 있습니다.\n" "더 추가하거나, 기존의 것들을 수정할수 있습니다." #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531 #: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953 #: ../../standalone/drakfont_.c:996 msgid "Add" msgstr "추가" #: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726 msgid "Done" msgstr "완료" #: ../../any.pm_.c:257 msgid "Modify" msgstr "변경" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "어떤 종류의 항목을 추가하시겠습니까?" #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674 msgid "Linux" msgstr "리눅스" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "기타 OS (SunOS...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "기타 OS (MacOS...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "기타 OS (windows...)" #: ../../any.pm_.c:285 msgid "Image" msgstr "이미지" #: ../../any.pm_.c:286 ../../any.pm_.c:297 msgid "Root" msgstr "루트" #: ../../any.pm_.c:287 ../../any.pm_.c:315 msgid "Append" msgstr "추가" #: ../../any.pm_.c:291 msgid "Initrd" msgstr "초기화 램디스크" #: ../../any.pm_.c:292 msgid "Read-write" msgstr "읽기-쓰기" #: ../../any.pm_.c:299 msgid "Table" msgstr "테이블" #: ../../any.pm_.c:300 msgid "Unsafe" msgstr "위험" #: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314 msgid "Label" msgstr "항목명" #: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215 msgid "Default" msgstr "기본값" #: ../../any.pm_.c:316 msgid "Initrd-size" msgstr "램디스크 용량" #: ../../any.pm_.c:318 msgid "NoVideo" msgstr "비디오 없음" #: ../../any.pm_.c:326 msgid "Remove entry" msgstr "항목 제거" #: ../../any.pm_.c:329 msgid "Empty label not allowed" msgstr "빈 항목명은 허용되지 않습니다." #: ../../any.pm_.c:330 msgid "You must specify a kernel image" msgstr "커널 이미지를 지정해 주세요." #: ../../any.pm_.c:330 msgid "You must specify a root partition" msgstr "루트 파티션은 반드시 지정되어야 합니다." #: ../../any.pm_.c:331 msgid "This label is already used" msgstr "이 항목명은 이미 사용되고 있습니다." #: ../../any.pm_.c:640 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s 인터페이스가 감지되었습니다." #: ../../any.pm_.c:641 msgid "Do you have another one?" msgstr "또 다른것이 설치되어 있습니까?" #: ../../any.pm_.c:642 #, c-format msgid "Do you have any %s interfaces?" msgstr "또 다른 %s 인터페이스가 설치되어 있습니까?" #: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925 msgid "No" msgstr "아니오" #: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258 #: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267 #: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925 msgid "Yes" msgstr "예" #: ../../any.pm_.c:645 msgid "See hardware info" msgstr "하드웨어 정보 보기" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:662 #, c-format msgid "Installing driver for %s card %s" msgstr "%s카드 드라이버 %s 설치중" #: ../../any.pm_.c:663 #, c-format msgid "(module %s)" msgstr "(%s 모듈 사용)" #: ../../any.pm_.c:674 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../any.pm_.c:680 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "이제 %s 드라이버에 옵션을 지정할 수 있습니다.\n" "옵션은 ``이름=값 이름2=값2 ...''형식으로 지정합니다..\n" "가령, ``io=0x300 irq=7''" #: ../../any.pm_.c:682 msgid "Module options:" msgstr "모듈 옵션들:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:694 #, c-format msgid "Which %s driver should I try?" msgstr "어떤 %s 드라이버를 시도해 봅니까?" #: ../../any.pm_.c:703 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "일반적으로 %s 드라이버는 추가 정보 없이도 잘 작동하지만, 어떤 경우에는 \n" "추가 정보를 필요로 하기도 합니다. 추가 옵션을 지정하시겠습니까, 아니면 \n" "필요한 정보를 자동검색하게 하겠습니까?\n" "자동검색은 어쩌다가 컴퓨터를 멈추게 할 수도 있습니다.하지만,\n" "장치를 훼손하지는 않습니다." #: ../../any.pm_.c:707 msgid "Autoprobe" msgstr "자동검색" #: ../../any.pm_.c:707 msgid "Specify options" msgstr "옵션 지정" #: ../../any.pm_.c:719 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s 모듈을 읽어들이는데 실패했습니다.\n" "다른 값으로 다시 시도해 보시겠습니까?" #: ../../any.pm_.c:734 msgid "access to X programs" msgstr "X 프로그램 액세스" #: ../../any.pm_.c:735 msgid "access to rpm tools" msgstr "RPM 도구 액세스" #: ../../any.pm_.c:736 msgid "allow \"su\"" msgstr "「su」허용" #: ../../any.pm_.c:737 msgid "access to administrative files" msgstr "시스템 관리파일 액세스" #: ../../any.pm_.c:738 msgid "access to network tools" msgstr "네트웍 도구 액세스" #: ../../any.pm_.c:739 msgid "access to compilation tools" msgstr "컴파일 도구 액세스" #: ../../any.pm_.c:744 #, c-format msgid "(already added %s)" msgstr "(이미 %s는(은) 추가되었습니다.)" #: ../../any.pm_.c:749 msgid "This password is too simple" msgstr "이 암호는 너무 단순합니다." #: ../../any.pm_.c:750 msgid "Please give a user name" msgstr "사용자명을 입력해 주세요" #: ../../any.pm_.c:751 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "사용자명은 영문 소문자나 숫자, '-' 그리고 '_' 만 포함될수 있습니다." #: ../../any.pm_.c:752 msgid "The user name is too long" msgstr "사용자 명이 너무 깁니다." #: ../../any.pm_.c:753 msgid "This user name is already added" msgstr "이 사용자명은 이미 추가되어 있습니다." #: ../../any.pm_.c:757 msgid "Add user" msgstr "사용자 추가" #: ../../any.pm_.c:758 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "사용자 입력\n" "%s" #: ../../any.pm_.c:759 msgid "Accept user" msgstr "사용자 허가" #: ../../any.pm_.c:770 msgid "Real name" msgstr "실제 이름" #: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802 #: ../../printer/printerdrake.pm_.c:915 msgid "User name" msgstr "사용자명" #: ../../any.pm_.c:774 msgid "Shell" msgstr "명령 해석기" #: ../../any.pm_.c:776 msgid "Icon" msgstr "아이콘" #: ../../any.pm_.c:803 msgid "Autologin" msgstr "자동로그인" #: ../../any.pm_.c:804 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "자동으로 특정 사용자로서 로그인되도록 할 수 있습니다.\n" "이런 특성을 원하세요?" #: ../../any.pm_.c:808 msgid "Choose the default user:" msgstr "기본 사용자를 선택하세요:" #: ../../any.pm_.c:809 msgid "Choose the window manager to run:" msgstr "사용할 윈도우 매니저를 선택하세요:" #: ../../any.pm_.c:824 msgid "Please choose a language to use." msgstr "사용할 언어를 선택해 주세요." #: ../../any.pm_.c:826 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "설치후 다른 다른 언어를 선택할수 있습니다." #: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697 #: ../../standalone/drakxtv_.c:70 msgid "All" msgstr "모두" #: ../../any.pm_.c:961 msgid "Allow all users" msgstr "모든 사용자 허용" #: ../../any.pm_.c:961 msgid "No sharing" msgstr "비공유" #: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../any.pm_.c:973 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "NFS와 삼바 중, 어느 것을 이용하시겠습니까?" #: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190 #, c-format msgid "Mandatory package %s is missing" msgstr "필수 팩키지 %s가 없습니다." #: ../../any.pm_.c:987 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm_.c:1001 msgid "Launch userdrake" msgstr "사용자드레이크 실행" #: ../../any.pm_.c:1003 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" #: ../../any.pm_.c:1053 ../../security/level.pm_.c:7 msgid "Welcome To Crackers" msgstr "보안에 신경안씀" #: ../../any.pm_.c:1054 ../../security/level.pm_.c:8 msgid "Poor" msgstr "최저" #: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9 msgid "Standard" msgstr "표준" #: ../../any.pm_.c:1056 ../../security/level.pm_.c:10 msgid "High" msgstr "높음" #: ../../any.pm_.c:1057 ../../security/level.pm_.c:11 msgid "Higher" msgstr "더 높음" #: ../../any.pm_.c:1058 ../../security/level.pm_.c:12 msgid "Paranoid" msgstr "최고" #: ../../any.pm_.c:1061 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "이 등급을 사용할려면 매우 주의하여야 합니다. 시스템을 사용하기에는 \n" "용이하겠지만 매우 민감하게 작동합니다: 인터넷이나 네트웍에 연결된 시스템용\n" "으로는 사용하지 마세요. 암호기능이 없습니다." #: ../../any.pm_.c:1064 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "암호기능이 적용되지만, 네트웍에 연결된 컴퓨터로 사용하기에는 아직 적절하지 않" "습니다." #: ../../any.pm_.c:1065 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "이 등급은 클라이언트로서 인터넷에 접속하는데 적당한 표준 보안등급입니다." #: ../../any.pm_.c:1066 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../any.pm_.c:1067 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "이 보안등급으로 이 시스템을 서버로 운용할 수 있게 됩니다.\n" "이 보안등급은 외부의 클라이언트들의 접속을 받아들이는데 있어서 \n" "충분히 높은 보안등급입니다. 주의: 인터넷 클라이언트로 컴퓨터를 사용한다면, " "더 낮은 등급을 선택하세요." #: ../../any.pm_.c:1070 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "이전 등급과 비슷하지만, 시스템이 완전히 외부접근에서 격리됩니다. 최고 보안 수" "준입니다." #: ../../any.pm_.c:1076 msgid "DrakSec Basic Options" msgstr "DrakSec 기본 옵션" #: ../../any.pm_.c:1077 msgid "Please choose the desired security level" msgstr "희망하는 보안 단계를 선택해 주세요." #: ../../any.pm_.c:1080 msgid "Security level" msgstr "보안 수준" #: ../../any.pm_.c:1082 msgid "Use libsafe for servers" msgstr "서버에 대해 libsafe 사용" #: ../../any.pm_.c:1083 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "버퍼 넘침이나 형식화 문자열 공격을 막는 라이브러리." #: ../../any.pm_.c:1084 msgid "Security Administrator (login or email)" msgstr "보안 관리자 (로그인 또는 이메일)" #: ../../any.pm_.c:1166 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:436 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:983 msgid "Welcome to GRUB the operating system chooser!" msgstr "반갑습니다. 운영체제 선택기, 그럽입니다." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:986 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 msgid "commands before booting, or 'c' for a command-line." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../bootloader.pm_.c:999 msgid "not enough room in /boot" msgstr "/boot에 공간이 부족합니다." #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1099 msgid "Desktop" msgstr "데스크탑" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1101 msgid "Start Menu" msgstr "시작 메뉴" #: ../../bootloader.pm_.c:1120 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "「%s」파티션에 부트로더를 설치할 수 없습니다.\n" #: ../../bootlook.pm_.c:53 msgid "Boot Style Configuration" msgstr "부팅 스타일 설정" #: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54 #: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82 #: ../../standalone/logdrake_.c:74 msgid "/_File" msgstr "/파일(_F)" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/logdrake_.c:80 msgid "/File/_Quit" msgstr "/파일(F)/종료(_Q)" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:82 msgid "NewStyle Categorizing Monitor" msgstr "새 스타일 범주화 모니터" #: ../../bootlook.pm_.c:83 msgid "NewStyle Monitor" msgstr "새 스타일 모니터" #: ../../bootlook.pm_.c:84 msgid "Traditional Monitor" msgstr "전통적 모니터" #: ../../bootlook.pm_.c:85 msgid "Traditional Gtk+ Monitor" msgstr "전통적 GTK+ 모니터" #: ../../bootlook.pm_.c:86 msgid "Launch Aurora at boot time" msgstr "부팅시 오로라 실행" #: ../../bootlook.pm_.c:89 msgid "Lilo/grub mode" msgstr "LILO/Grub 모드" #: ../../bootlook.pm_.c:89 msgid "Yaboot mode" msgstr "Yaboot 모드" #: ../../bootlook.pm_.c:138 msgid "Install themes" msgstr "테마 설치" #: ../../bootlook.pm_.c:139 msgid "" "Display theme\n" "under console" msgstr "" "콘솔하에서\n" "테마 보이기" #: ../../bootlook.pm_.c:140 msgid "Create new theme" msgstr "새 테마 만들기" #: ../../bootlook.pm_.c:184 #, c-format msgid "Backup %s to %s.old" msgstr "%s를 %s.old로 백업" #: ../../bootlook.pm_.c:187 #, c-format msgid "Copy %s to %s" msgstr "%s를 %s로 복사" #: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224 #: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119 #: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352 #: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481 #: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21 msgid "Error" msgstr "오류" #: ../../bootlook.pm_.c:192 msgid "Lilo message not found" msgstr "릴로 메시지를 찾을 수 없습니다." #: ../../bootlook.pm_.c:222 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../bootlook.pm_.c:222 #, c-format msgid "Write %s" msgstr "%s 기록" #: ../../bootlook.pm_.c:224 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../bootlook.pm_.c:235 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../bootlook.pm_.c:238 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "" #: ../../bootlook.pm_.c:244 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../bootlook.pm_.c:248 msgid "Relaunch 'lilo'" msgstr "릴로 재실행" #: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156 #: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449 msgid "Notice" msgstr "주의" #: ../../bootlook.pm_.c:251 msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../bootlook.pm_.c:251 msgid "Theme installation failed!" msgstr "테마 설치 실패!" #: ../../bootlook.pm_.c:259 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "현재 부트 관리자로 %s를 사용하고 있습니다.\n" "설정 마법사를 실행하려면 「설정」을 누르세요." #: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380 #: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400 #: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551 msgid "Configure" msgstr "설정" #: ../../bootlook.pm_.c:268 msgid "Splash selection" msgstr "스플래쉬 선택" #: ../../bootlook.pm_.c:271 msgid "Themes" msgstr "테마" #: ../../bootlook.pm_.c:273 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" #: ../../bootlook.pm_.c:276 msgid "Lilo screen" msgstr "릴로 스크린" #: ../../bootlook.pm_.c:281 msgid "Bootsplash" msgstr "부트스플레쉬" #: ../../bootlook.pm_.c:316 msgid "System mode" msgstr "시스템 모드" #: ../../bootlook.pm_.c:318 msgid "Launch the graphical environment when your system starts" msgstr "시작할 때 X-Window 실행" #: ../../bootlook.pm_.c:323 msgid "No, I don't want autologin" msgstr "아니오, 자동로그인을 사용하지 않습니다." #: ../../bootlook.pm_.c:325 msgid "Yes, I want autologin with this (user, desktop)" msgstr "예, 자동로그인을 사용합니다." #: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96 #: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355 #: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797 #: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137 #: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432 #: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561 #: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604 #: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911 #: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288 #: ../../ugtk2.pm_.c:355 msgid "OK" msgstr "확인" #: ../../common.pm_.c:107 msgid "GB" msgstr "GB" #: ../../common.pm_.c:107 msgid "KB" msgstr "KB" #: ../../common.pm_.c:107 msgid "MB" msgstr "MB" #: ../../common.pm_.c:115 msgid "TB" msgstr "TB" #: ../../common.pm_.c:123 #, c-format msgid "%d minutes" msgstr "%d 분" #: ../../common.pm_.c:125 msgid "1 minute" msgstr "1 분" #: ../../common.pm_.c:127 #, c-format msgid "%d seconds" msgstr "%d 초" #: ../../common.pm_.c:172 msgid "Can't make screenshots before partitioning" msgstr "파티션을 나누기 전에는 스크린샷을 만들 수 없습니다." #: ../../common.pm_.c:179 #, c-format msgid "Screenshots will be available after install in %s" msgstr "스크린샷은 설치후에 %s에 있습니다." #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:127 msgid "France" msgstr "프랑스" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "코스타리카" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:130 msgid "Belgium" msgstr "벨기에" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "체코 공화국" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "독일" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "그리스" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "노르웨이" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "스웨덴" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:128 msgid "Netherlands" msgstr "네덜란드" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65 msgid "Italy" msgstr "이탈리아" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "오스트리아" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:131 msgid "United States" msgstr "미국" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/dav.pm_.c:27 msgid "New" msgstr "새로 만들기" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "언마운트" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "마운트" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "서버" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391 #: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "마운트 위치" #: ../../diskdrake/dav.pm_.c:85 msgid "Please enter the WebDAV server URL" msgstr "WebDAV 서버 URL을 입력하세요." #: ../../diskdrake/dav.pm_.c:88 msgid "The URL must begin with http:// or https://" msgstr "" #: ../../diskdrake/dav.pm_.c:109 msgid "Server: " msgstr "서버:" #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452 #: ../../diskdrake/interactive.pm_.c:1102 #: ../../diskdrake/interactive.pm_.c:1177 msgid "Mount point: " msgstr "마운트 위치: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183 #, c-format msgid "Options: %s" msgstr "옵션들: %s" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "Please make a backup of your data first" msgstr "먼저 데이터를 백업하세요." #: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946 #: ../../diskdrake/interactive.pm_.c:956 #: ../../diskdrake/interactive.pm_.c:1022 msgid "Read carefully!" msgstr "주의깊게 읽으세요!" #: ../../diskdrake/hd_gtk.pm_.c:100 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "만약 aboot를 사용할 계획이라면, 디스크의 시작부분에 충분한 공간 (2048 섹터 " "면 충분함)\n" "을 남기도록 주의하세요." #: ../../diskdrake/hd_gtk.pm_.c:154 msgid "Wizard" msgstr "마법사" #: ../../diskdrake/hd_gtk.pm_.c:187 msgid "Choose action" msgstr "행동을 선택하세요" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "하나의 큰 도스 파티션을 가지고 있습니다.\n" "(일반적으로 마이크로소프트의 도스/윈도우즈에서 사용).\n" "먼저 그 파티션의 크기를 조정할 것을 권장합니다.\n" "(그것을 클릭한후, \"크기조정\"을 클릭하세요.)" #: ../../diskdrake/hd_gtk.pm_.c:194 msgid "Please click on a partition" msgstr "파티션을 클릭하세요" #: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:464 msgid "Details" msgstr "상세설명" #: ../../diskdrake/hd_gtk.pm_.c:254 msgid "No hard drives found" msgstr "하드 디스크를 찾을 수 없습니다." #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Journalised FS" msgstr "저널화 FS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Swap" msgstr "스왑" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118 msgid "Empty" msgstr "빈공간" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324 #: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165 #: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719 msgid "Other" msgstr "기타" #: ../../diskdrake/hd_gtk.pm_.c:330 msgid "Filesystem types:" msgstr "파일시스템 유형:" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414 msgid "Create" msgstr "생성" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66 msgid "Type" msgstr "유형" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349 #, c-format msgid "Use ``%s'' instead" msgstr "대신에 「%s」를 사용합니다" #: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401 msgid "Delete" msgstr "삭제" #: ../../diskdrake/hd_gtk.pm_.c:353 msgid "Use ``Unmount'' first" msgstr "「언마운트」를 먼저 사용하세요" #: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "%s의 파티션 유형을 변경후 이 파티션내의 모든 자료를 잃게 됩니다." #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose a partition" msgstr "파티션 선택" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose another partition" msgstr "추가 파티션 선택" #: ../../diskdrake/interactive.pm_.c:202 msgid "Exit" msgstr "종료" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to expert mode" msgstr "전문가 모드로 전환" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to normal mode" msgstr "일반 모드로 전환" #: ../../diskdrake/interactive.pm_.c:228 msgid "Undo" msgstr "되돌리기" #: ../../diskdrake/interactive.pm_.c:247 msgid "Continue anyway?" msgstr "계속하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without saving" msgstr "저장하지 않고 종료하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without writing the partition table?" msgstr "파티션을 기록하지 않고 종료하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:257 msgid "Do you want to save /etc/fstab modifications" msgstr "「/etc/fstab」의 변경사항을 저장하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:271 msgid "Clear all" msgstr "모두 삭제" #: ../../diskdrake/interactive.pm_.c:272 msgid "Auto allocate" msgstr "자동 할당" #: ../../diskdrake/interactive.pm_.c:273 #: ../../install_steps_interactive.pm_.c:220 msgid "More" msgstr "추가 옵션" #: ../../diskdrake/interactive.pm_.c:278 msgid "Hard drive information" msgstr "하드 디스크 정보" #: ../../diskdrake/interactive.pm_.c:310 msgid "All primary partitions are used" msgstr "모든 주파티션이 사용중입니다." #: ../../diskdrake/interactive.pm_.c:311 msgid "I can't add any more partition" msgstr "더이상 파티션을 추가할 수 없습니다." #: ../../diskdrake/interactive.pm_.c:312 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "더 많은 파티션을 만드실려면, 확장 파티션을 만들수 있도록 주파티션 하나를 지우" "세요." #: ../../diskdrake/interactive.pm_.c:322 msgid "Save partition table" msgstr "파티션 테이블 저장" #: ../../diskdrake/interactive.pm_.c:323 msgid "Restore partition table" msgstr "파티션 테이블 복구" #: ../../diskdrake/interactive.pm_.c:324 msgid "Rescue partition table" msgstr "파티션 테이블 응급처치" #: ../../diskdrake/interactive.pm_.c:326 msgid "Reload partition table" msgstr "파티션 테이블 다시 읽기" #: ../../diskdrake/interactive.pm_.c:331 msgid "Removable media automounting" msgstr "탈착식 미디어 자동 마운트" #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360 msgid "Select file" msgstr "파일을 선택하세요." #: ../../diskdrake/interactive.pm_.c:347 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "백업 파티션 테이블 크기가 같지 않습니다.\n" "계속 하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202 #: ../../network/modem.pm_.c:95 msgid "Warning" msgstr "경고" #: ../../diskdrake/interactive.pm_.c:362 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "플로피 디스크를 드라이브에 넣으세요\n" "플로피 디스크의 모든 자료를 잃게 됩니다." #: ../../diskdrake/interactive.pm_.c:373 msgid "Trying to rescue partition table" msgstr "파티션 테이블 복구 시도 중..." #: ../../diskdrake/interactive.pm_.c:379 msgid "Detailed information" msgstr "자세한 정보" #: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674 msgid "Resize" msgstr "크기조정" #: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727 msgid "Move" msgstr "이동" #: ../../diskdrake/interactive.pm_.c:396 msgid "Format" msgstr "포맷" #: ../../diskdrake/interactive.pm_.c:398 msgid "Add to RAID" msgstr "RAID에 추가" #: ../../diskdrake/interactive.pm_.c:399 msgid "Add to LVM" msgstr "LVM에 추가" #: ../../diskdrake/interactive.pm_.c:402 msgid "Remove from RAID" msgstr "RAID로부터 제거" #: ../../diskdrake/interactive.pm_.c:403 msgid "Remove from LVM" msgstr "LVM으로부터 제거" #: ../../diskdrake/interactive.pm_.c:404 msgid "Modify RAID" msgstr "RAID 수정" #: ../../diskdrake/interactive.pm_.c:405 msgid "Use for loopback" msgstr "루프백으로 사용" #: ../../diskdrake/interactive.pm_.c:445 msgid "Create a new partition" msgstr "새 파티션 만들기" #: ../../diskdrake/interactive.pm_.c:448 msgid "Start sector: " msgstr "시작 섹터: " #: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827 msgid "Size in MB: " msgstr "크기(MB) :" #: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828 msgid "Filesystem type: " msgstr "파일시스템 유형: " #: ../../diskdrake/interactive.pm_.c:456 msgid "Preference: " msgstr "사용자 정의" #: ../../diskdrake/interactive.pm_.c:481 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm_.c:511 msgid "Remove the loopback file?" msgstr "루프백 파일을 제거합니까?" #: ../../diskdrake/interactive.pm_.c:541 msgid "Change partition type" msgstr "파티션 유형 변경" #: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "어떤 파일 시스템을 원하세요?" #: ../../diskdrake/interactive.pm_.c:548 msgid "Switching from ext2 to ext3" msgstr "EXT2에서 EXT3로 변경" #: ../../diskdrake/interactive.pm_.c:578 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "%s파일을 어디에 루프백으로 마운트 하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:579 #, c-format msgid "Where do you want to mount device %s?" msgstr "장치 %s를 어디에 마운트 하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:585 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "이 파티션은 loopback으로 설정되어 있으므로 마운트 포인트를 변경할수 없습니" "다.\n" "loopback을 먼저 제거하세요." #: ../../diskdrake/interactive.pm_.c:606 #, c-format msgid "Where do you want to mount %s?" msgstr "%s를 어디에 마운트 하시겠습니까?" #: ../../diskdrake/interactive.pm_.c:630 msgid "Computing FAT filesystem bounds" msgstr "도스 파일시스템의 범위 계산중" #: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "크기변경" #: ../../diskdrake/interactive.pm_.c:662 msgid "This partition is not resizeable" msgstr "이 파티션은 크기변경이 허용되지 않습니다." #: ../../diskdrake/interactive.pm_.c:667 msgid "All data on this partition should be backed-up" msgstr "이 파티션의 모든 데이타를 백업하여야 합니다." #: ../../diskdrake/interactive.pm_.c:669 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s 파티션의 크기를 변경하면, 모든 데이타를 잃게됩니다." #: ../../diskdrake/interactive.pm_.c:674 msgid "Choose the new size" msgstr "새로운 크기를 선택해 주세요" #: ../../diskdrake/interactive.pm_.c:675 msgid "New size in MB: " msgstr "새로운 용량(MB):" #: ../../diskdrake/interactive.pm_.c:728 msgid "Which disk do you want to move it to?" msgstr "어떤 디스크를 이동하고 싶으십니까?" #: ../../diskdrake/interactive.pm_.c:729 msgid "Sector" msgstr "섹터" #: ../../diskdrake/interactive.pm_.c:730 msgid "Which sector do you want to move it to?" msgstr "어떤 섹터를 이동하고 싶으십니까?" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving" msgstr "이동 중" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving partition..." msgstr "파티션 이동 중..." #: ../../diskdrake/interactive.pm_.c:750 msgid "Choose an existing RAID to add to" msgstr "추가할 기존 RAID를 선택하세요." #: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768 msgid "new" msgstr "새로 만들기" #: ../../diskdrake/interactive.pm_.c:766 msgid "Choose an existing LVM to add to" msgstr "추가할 LVM를 선택하세요" #: ../../diskdrake/interactive.pm_.c:771 msgid "LVM name?" msgstr "LVM 이름?" #: ../../diskdrake/interactive.pm_.c:812 msgid "This partition can't be used for loopback" msgstr "이 파티션은 loopback으로 사용될 수 없습니다." #: ../../diskdrake/interactive.pm_.c:825 msgid "Loopback" msgstr "루프백" #: ../../diskdrake/interactive.pm_.c:826 msgid "Loopback file name: " msgstr "루프백 파일 이름: " #: ../../diskdrake/interactive.pm_.c:831 msgid "Give a file name" msgstr "파일 이름을 입력하세요." #: ../../diskdrake/interactive.pm_.c:834 msgid "File already used by another loopback, choose another one" msgstr "다른 루프백이 이 파일을 사용하고 있습니다, 다른 것을 선택해 주세요." #: ../../diskdrake/interactive.pm_.c:835 msgid "File already exists. Use it?" msgstr "파일이 이미 존재합니다. 그것을 사용합니까?" #: ../../diskdrake/interactive.pm_.c:858 msgid "Mount options" msgstr "마운트 옵션들:" #: ../../diskdrake/interactive.pm_.c:865 msgid "Various" msgstr "다양한" #: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76 msgid "device" msgstr "장치" #: ../../diskdrake/interactive.pm_.c:930 msgid "level" msgstr "레벨" #: ../../diskdrake/interactive.pm_.c:931 msgid "chunk size" msgstr "크기" #: ../../diskdrake/interactive.pm_.c:947 msgid "Be careful: this operation is dangerous." msgstr "주의 : 이 조작은 위험합니다." #: ../../diskdrake/interactive.pm_.c:962 msgid "What type of partitioning?" msgstr "어떤 유형의 파티션입니까?" #: ../../diskdrake/interactive.pm_.c:978 #, c-format msgid "The package %s is needed. Install it?" msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?" #: ../../diskdrake/interactive.pm_.c:992 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "죄송합니다. /boot 디렉토리가 드라이브상에서 허용범위를 넘어서 있어 생성할수 " "없습니다. ( 1024 실린더 이하에서만 가능합니다.\n" "LILO를 사용한다고 하더라도 동작하지 않고, LILO 자체를 사용할수도 없습니다." #: ../../diskdrake/interactive.pm_.c:996 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "선택한 root(/)가 물리적으로 1024실린더 뒤에 있습니다.\n" "따라서 /boot 파티션을 가질수 없습니다.\n" "LILO 부트 매니저를 사용하려 한다면, 주의해서 /boot 파티션을 추가하세요." #: ../../diskdrake/interactive.pm_.c:1002 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "소프트웨어 RAID 파티션을 루트(/)로 지정했습니다.\n" "어떠한 부트로더도 /boot 파티션 없이는 이것을 처리하지 못합니다.\n" "그러므로 /boot 파티션을 추가하는 것을 잊지 마세요." #: ../../diskdrake/interactive.pm_.c:1022 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s 드라이브의 파티션 테이블을 저장합니다." #: ../../diskdrake/interactive.pm_.c:1026 msgid "You'll need to reboot before the modification can take place" msgstr "변경된것을 적용하기 위해선 리부팅이 필요합니다." #: ../../diskdrake/interactive.pm_.c:1037 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "%s 파티션을 포맷하면, 모든 데이타를 잃게 됩니다." #: ../../diskdrake/interactive.pm_.c:1039 msgid "Formatting" msgstr "포맷 중" #: ../../diskdrake/interactive.pm_.c:1040 #, c-format msgid "Formatting loopback file %s" msgstr "loopback 파일 %s 포매중" #: ../../diskdrake/interactive.pm_.c:1041 #: ../../install_steps_interactive.pm_.c:466 #, c-format msgid "Formatting partition %s" msgstr "%s 파티션 포맷중" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Hide files" msgstr "파일 숨기기" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Move files to the new partition" msgstr "새 파티션으로 파일 옴기기" #: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "디렉토리 %s에는 이미 데이터가 있습니다.\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1064 msgid "Moving files to the new partition" msgstr "새 파티션으로 파일 옴기는 중" #: ../../diskdrake/interactive.pm_.c:1068 #, c-format msgid "Copying %s" msgstr "%s 복사 중" #: ../../diskdrake/interactive.pm_.c:1072 #, c-format msgid "Removing %s" msgstr "%s 제거 중" #: ../../diskdrake/interactive.pm_.c:1082 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1103 #: ../../diskdrake/interactive.pm_.c:1162 msgid "Device: " msgstr "장치: " #: ../../diskdrake/interactive.pm_.c:1104 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 드라이브 문자: %s (단지 추측일 뿐임)\n" #: ../../diskdrake/interactive.pm_.c:1108 #: ../../diskdrake/interactive.pm_.c:1116 #: ../../diskdrake/interactive.pm_.c:1181 msgid "Type: " msgstr "유형: " #: ../../diskdrake/interactive.pm_.c:1112 msgid "Name: " msgstr "이름:" #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "Start: sector %s\n" msgstr "시작: 섹터 %s\n" #: ../../diskdrake/interactive.pm_.c:1121 #, c-format msgid "Size: %s" msgstr "크기: %s" #: ../../diskdrake/interactive.pm_.c:1123 #, c-format msgid ", %s sectors" msgstr ", %s 섹터" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Cylinder %d to %d\n" msgstr "실린더 %d에서 %d까지\n" #: ../../diskdrake/interactive.pm_.c:1126 msgid "Formatted\n" msgstr "포맷되었음\n" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Not formatted\n" msgstr "포맷 안되었음\n" #: ../../diskdrake/interactive.pm_.c:1128 msgid "Mounted\n" msgstr "마운트 되었음\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "RAID md%s\n" msgstr "레이드 장치 %s\n" #: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "루프백 파일(들):\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "기본적으로 부팅되는 파티션\n" " (lilo를 위한것이 아니라 MS-DOS boot를 위한것임)\n" #: ../../diskdrake/interactive.pm_.c:1134 #, c-format msgid "Level %s\n" msgstr "%s 등급\n" #: ../../diskdrake/interactive.pm_.c:1135 #, c-format msgid "Chunk size %s\n" msgstr "크기 %s\n" #: ../../diskdrake/interactive.pm_.c:1136 #, c-format msgid "RAID-disks %s\n" msgstr "레이드-디스크 %s\n" #: ../../diskdrake/interactive.pm_.c:1138 #, c-format msgid "Loopback file name: %s" msgstr "루프백 파일 이름: %s" #: ../../diskdrake/interactive.pm_.c:1141 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "이 파티션은 드라이버 파티션입니다.\n" "그냥 두는 것이 좋습니다.\n" #: ../../diskdrake/interactive.pm_.c:1144 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "이 특별한 부트스트랩\n" "파티션은 시스템을 \n" "듀얼 부팅하기 위한 것입니다.\n" #: ../../diskdrake/interactive.pm_.c:1163 msgid "Read-only" msgstr "" #: ../../diskdrake/interactive.pm_.c:1164 #, c-format msgid "Size: %s\n" msgstr "크기: %s\n" #: ../../diskdrake/interactive.pm_.c:1165 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "위치: %s 실린터, %s 헤드, %s 섹터\n" #: ../../diskdrake/interactive.pm_.c:1166 msgid "Info: " msgstr "정보: " #: ../../diskdrake/interactive.pm_.c:1167 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-디스크 %s\n" #: ../../diskdrake/interactive.pm_.c:1168 #, c-format msgid "Partition table type: %s\n" msgstr "파티션 테이블 유형: %s\n" #: ../../diskdrake/interactive.pm_.c:1169 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "%d 버스상에서 ID %d\n" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Filesystem encryption key" msgstr "파일시스템 암호화 키" #: ../../diskdrake/interactive.pm_.c:1200 msgid "Choose your filesystem encryption key" msgstr "파일 시스템 암호화 키 선택" #: ../../diskdrake/interactive.pm_.c:1203 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "이 암호화 키는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)" #: ../../diskdrake/interactive.pm_.c:1204 msgid "The encryption keys do not match" msgstr "암호화 키가 일치하지 않습니다." #: ../../diskdrake/interactive.pm_.c:1207 msgid "Encryption key" msgstr "암호화 키" #: ../../diskdrake/interactive.pm_.c:1208 msgid "Encryption key (again)" msgstr "암호화 키 (확인)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "유형 변경" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "도메인 인증이 필요합니다." #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "또 다른 것" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "사용할 아이디" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477 msgid "Username" msgstr "사용자명" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "도메인" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "서버 검색" #: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565 #: ../../fs.pm_.c:569 ../../fs.pm_.c:573 #, c-format msgid "%s formatting of %s failed" msgstr "%s 포맷 실패(드라이브 %s)" #: ../../fs.pm_.c:610 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s는 %s 유형이므로 포맷할수 없습니다." #: ../../fs.pm_.c:684 ../../fs.pm_.c:727 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599 #, c-format msgid "error unmounting %s: %s" msgstr "%s를 언마운트중 오류발생: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "단순화" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "서버" #: ../../fsedit.pm_.c:240 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "하드 디스크의 파티션 테이블을 읽을수 없습니다. 너무 손상되어 있습니다:(\n" "문제있는 파티션을 비우기위한 시도를 할 수 있습니다.(모든 데이터가 손실됩니" "다!)\n" "다른 해결책은 DrakX가 파티션 테이블을 변경하지 못하게 하는 것입니다.\n" "(오류는 %s 입니다.)\n" "\n" "파티션들을 잃어도 좋습니까?\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "16MB 미만의 파티션에는 JFS 파일 시스템을 사용할 수 없습니다." #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "32MB 미만의 파티션에는 ReiserFS 파일 시스템을 사용할 수 없습니다." #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "마운트 위치는 반드시 「/」로 시작하여야 합니다." #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "마운트 위치 %s가 이미 존재합니다.\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr " %s 마운트 포인트로 LVM 논리볼륨을 사용할 수는 없습니다. " #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "이 디렉토리는 루트 파일시스템 안에 있어야 합니다." #: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "이 마운트 위치에는 트루 파일시스템 (ext2, reiserfs, xfs, jfs)이 필요합니다.\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr " %s 마운트 위치에는 암호화 파일시스템을 사용할 수 없습니다. " #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "자동할당하기에는 공간이 합니다." #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "할 일 없음." #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "%s를 쓰기위해 여는중 오류발생: %s" #: ../../harddrake/data.pm_.c:71 msgid "cpu /* " msgstr "" #: ../../harddrake/sound.pm_.c:170 msgid "No alternative driver" msgstr "" #: ../../harddrake/sound.pm_.c:171 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../harddrake/sound.pm_.c:173 msgid "Sound configuration" msgstr "사운드 설정" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../harddrake/sound.pm_.c:176 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm_.c:178 msgid "Driver:" msgstr "드라이버:" #: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303 #: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911 #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030 #: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078 #: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134 #: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690 msgid "Help" msgstr "도움말" #: ../../harddrake/sound.pm_.c:185 msgid "Switching between ALSA and OSS help" msgstr "" #: ../../harddrake/sound.pm_.c:186 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm_.c:202 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298 msgid "Please Wait... Applying the configuration" msgstr "기다려 주세요... 설정을 적용하고 있습니다." #: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382 #: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113 #: ../../standalone/service_harddrake_.c:64 msgid "Please wait" msgstr "기다려 주세요" #: ../../harddrake/sound.pm_.c:210 msgid "No known driver" msgstr "" #: ../../harddrake/sound.pm_.c:211 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../harddrake/sound.pm_.c:214 msgid "Unkown driver" msgstr "알 수 없는 드라이버" #: ../../harddrake/sound.pm_.c:215 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "\n" "with subject: unlisted sound driver \"%s\"" msgstr "" #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 msgid "Auto-detect" msgstr "자동 검색" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198 msgid "Unknown|Generic" msgstr "알 수 없음|일반" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:224 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:227 msgid "Card model:" msgstr "카드 모델:" #: ../../harddrake/v4l.pm_.c:228 msgid "Tuner type:" msgstr "튜너 유형:" #: ../../harddrake/v4l.pm_.c:229 msgid "Number of capture buffers:" msgstr "캡쳐 버퍼 수:" #: ../../harddrake/v4l.pm_.c:229 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:231 msgid "PLL setting:" msgstr "PLL 설정:" #: ../../harddrake/v4l.pm_.c:232 msgid "Radio support:" msgstr "라디오 지원:" #: ../../harddrake/v4l.pm_.c:232 msgid "enable radio support" msgstr "라디오 지원" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "선택된 하드디스크상의 기존 리눅스 파티션이 위에 열거되어 있습니다.\n" "마법사에 의해 이미 설정된 사항을 보존할 수도 있으며, 이는 대부분의 일반\n" "설치에 적절한 설정입니다. 만약 직접 변경하시겠다면, 최소한 루트 파티션" "(「/」)\n" "은 반드시 지정해야 합니다. 너무 작은 파티션을 선택하지는 마세요. 충분한 소프" "트웨어\n" "를 설치하지 못하는 수가 있습니다. 만약 개인 데이터가 별도의 파티션에 저장되도" "록\n" "하고 싶다면, 「/home」파티션을 별도로 만드세요.(오직 리눅스 파티션이 둘 이상" "일\n" "경우에만 가능합니다.)\n" "\n" "각 파티션은 다음과 같이 열거됩니다: 「이름」,「용량」.\n" "\n" "「이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n" "「파티션 번호」(가령, 「hda1」).\n" "\n" "「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n" "SCSI 디스크일 경우에는 「sd」입니다.\n" "\n" "「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n" "IDE 하드디스크의 경우:\n" "\n" " ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" " ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" "SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI " "ID」\n" "와 같은 식으로 의미를 가집니다." #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "맨드레이크 리눅스 설치 시스템은 여러 장의 CD로 구성되어 있습니다.\n" "드레이크X는 선택된 각각의 팩키지가 어느 CD에 들어 있는지 이미 알고 있습니" "다.\n" "필요시 현재 CD를 자동으로 꺼내고 다른 CD의 삽입을 요청할 것입니다." #: ../../help.pm_.c:84 #, fuzzy msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "이제 시스템상에 설치할 프로그램들을 지정할 차례입니다.\n" "맨드레이크 리눅스에는 설치할 수 있는 수천 개의 프로그램들이 있기 때문에\n" "사용자가 그것들을 모두 다 알지는 못할 것입니다.\n" "\n" "만약 표준 CD 설치를 수행하고 있는 중이라면, 현재 가지고 있는 CD들에 대해\n" "질문할 것입니다. 가지고 있는 CD들의 라벨을 확인하고 현재 님의 상황에 맞는\n" "선택 상자를 지정하세요. 계속할 준비가 되었으면, 「확인」을 누르세요.\n" "\n" "팩키지들은 용도에 따라 그룹으로 나열되어 있습니다.\n" "그룹들 자체는 또다시 네 개의 영역으로 나열되어 있습니다:\n" "\n" " ○ 「워크스테이션」: 시스템을 워크스테이션으로 사용할 계획이라면,\n" "하나 이상의 해당 그룹을 선택하세요.\n" "\n" " ○ 「개발」: 시스템을 프로그래밍의 용도로 사용하려 한다면, 원하는 그룹들을\n" "선택하세요.\n" "\n" " ○ 「서버」: 끝으로, 시스템이 서버되기를 원한다면, 여기서 대부분의 일반 서비" "스들이\n" "설치되도록 선택할 수 있습니다.\n" "\n" " ○ 「그래픽 환경」: 여기는 님이 선호하는 그래픽 환경을 선택하는 곳입니다.\n" "그래픽 환경 워크스테이션을 원한다면, 최소한 하나는 선택해야 합니다!\n" "\n" "마우스 포인터를 그룹 이름들 위로 올리면, 해당 그룹에 대한 작은 풍선 도움말" "을\n" "보여 줄 것입니다.\n" "\n" "「개별 팩키지 선택」옵션을 선택할 수도 있습니다.\n" "이 옵션은 님이 제공되어지는 팩키지들에 대해 잘 알고 있거나, 설치되는 팩키지들" "에 대한\n" "총체적인 제어를 원할 경우에 유용할 것입니다.\n" "\n" "만약 님이 「업데이트」모드로 설치를 시작했다면, 기존에 설치되지 않은 팩키지들" "이\n" "설치되는 것을 막기위해 모든 그룹을 선택해제할 수 있습니다. 이렇게 하는 것은\n" "기존 시스템을 업데이트하거나 고치기 위한 좋은 방법입니다." #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" #: ../../help.pm_.c:171 #, fuzzy msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "이 컴퓨터를 인터넷이나 지역 네트워에 연결하고 싶다면, 올바른 옵션을\n" "선택하세요. 옵션을 선택하기 전에 네트웍 장치의 전원이 들어와있는지\n" "확인해서 드레이크X가 자동감지할 수 있도록 하세요.\n" "\n" "맨드레이크 리눅스에서는 설치시에 인터넷 설정을 하는 것이 여러 모로 좋습니" "다.\n" "유효한 연결 유형: 전통적 모뎀, ISDN 모뎀, ADSL 연결, 케이블 모뎀, LAN 연결(이" "더넷)\n" "\n" "자세한 설정 사항은 여기서 설명되지 않을 것입니다. 모든 인자들에 대한 정보는\n" "인터넷 서비스 공급자나 네트웍 관리자에게 문의해서 알아 보세요.\n" "\n" "사용자 설명서를 보면, 인터넷 연결에 대한 자세한 정보를 얻을 수 있습니다.\n" "또는 시스템이 다 설치될 때까지 기다린 후에, 설명서에 나와 있는 프로그램을 사" "용하여\n" "연결을 설정할 수도 있습니다.\n" "\n" "네트웍 설정을 설치가 끝난후에 하고 싶거나, 네트웍 설정을 끝마친 상태라면,\n" "「취소」를 눌러서 계속 진행하세요." #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "이제 부팅시에 어떤 서비스를 자동으로 시작하게 할지를 선택해야 합니다.\n" "\n" "현재 설치된 모든 서비스들이 여기에서 보여지고 있습니다.\n" "신중하게 검토해서 부팅시에 항상 필요로하는 것이 아니라면 선택을 해제하세요.\n" "\n" "마우스를 서비스 이름들 위로 올리면, 각 서비스에 대한 간단한 설명을 보여 줄 것" "입니다.\n" "만약 어떤 서비스가 필요한 것인지 아닌지를 잘 모르겠다면,\n" "기본값으로 그냥 두는 것이 안전한 선택입니다.\n" "\n" "이 컴퓨터를 서버용으로 사용하려 한다면, 이 단계에서 매우 주의해야 합니다.\n" "필요하지 않은 서비스가 시작되는 것은 바람직하지 않습니다. 일부 서비스는 \n" "서버상에서 실핸된다면 위험할 수도 있다는 것을 명심하세요. 원칙적으로 \n" "꼭 필요한 서비스들만 선택하세요." #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" #: ../../help.pm_.c:224 #, fuzzy msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" "X(X 윈도우 시스템)은 GNU/리눅스 그래픽 인터페이스의 핵심입니다.\n" "이를 기반으로 맨드레이크 리눅스에 포함된 모든 그래픽환경(KDE, 그놈,\n" "에프터스텝, 윈도우메이커...)이 작동합니다. 이번 단계에서 드레이크X는\n" "X의 지동 설정을 시도할 것입니다.\n" "\n" "아주 오래된(또는 아주 최신의) 하드웨어가 아니라면, 설정에 실패할 일은\n" "거의 없을 것입니다. 설정에 성공하면, 해당 모니터의 크기에서 가능한\n" "최고 해상도로 자동 테스트를 시작할 것입니다.\n" "테스트에서 창을 하나 띄우고 님에게 보이는지 질문할 것입니다.\n" "\n" "만약 「전문가」모드로 설치 중이라면, 님은 X설정 마법사로\n" "안내될 것입니다. 이 마법사에 대한 더 자세한 정보를 보려면,\n" "사용자 설명서의 해당 부분을 참조하세요.\n" "\n" "만약 테스트 창의 글씨를 볼 수 있고 「예」를 누르면, 드레이크X는 다음 단계로\n" "진행할 것입니다. 만약 글씨를 알아볼 수 없다면, 설정이 잘 못되었다는 것을\n" "의미합니다. 테스트는 10초후에 화면을 복구하면서 자동으로\n" "종료합니다." #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "마지막으로, 부팅시에 자동으로 그래픽 환경을 사용할 것인지를 질문할 것입니" "다.\n" "주의: 이 질문은 설정을 테스트하지 않았을지라도 나타나게 될 것입니다.\n" "시스템을 확실히 서버용으로 사용할 것이거나, 화면 설정에 성공하지 못한 경우라" "면\n" "「아니오」를 누르세요." #: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" #: ../../help.pm_.c:277 #, fuzzy msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "이제 하드디스크의 어디에 리눅스 맨드레이크를 설치할지를\n" "선택해야 합니다. 만약 하드디스크가 완전히 비어 있거나 또는\n" "다른 운영체제가 하드디스크 전체를 점유하고 있다면, 파티션을\n" " 나누어야 합니다. 파티션을 나눈다함은 리눅스 맨드레이크가\n" "설치될 공간을 확보하기 위하여 디스크를 논리적으로 분할한다는 의미입니다.\n" "\n" "일반적으로 파티션 과정을 거쳐 버리면 기존 데이터의 복구가 불가능해지기\n" "때문에,초보자에게는 고민스럽고 걱정스러운 작업입니다. 하지만 마법사를\n" "사용하면 이 작업을 쉽게 할 수 있습니다. 시작하기 전에, 충분한 시간을 가지고\n" "사용자 설명서를 읽어 보세요.\n" "\n" "현재 전문가 모드로 설치를 진행 중이라면, 리눅스 맨드레이크의 파티션 분할 도구" "인\n" "디스크드레이크를 만나게 될 것입니다. 이 도구는 파티션드르이 세밀한 조정을 가" "능하게\n" "합니다. 설명서의 디스크드레이크 장을 보세요; 사용법이 동일합니다. 위에서 언급" "했듯이\n" "화면에 있는 「마법사」버튼을 눌러서, 파티션 분할 작업을 위한 마법사를\n" "실행할 수도 있습니다.\n" "\n" "만약 이전에 리눅스를 설치한 적이 있거나 다른 파티션 도구로 만들어 놓은 리눅스" "용\n" "파티션들이 이미 존재한다면, 리눅스 설치에 사용할 파티션들을\n" "선택만 하면 됩니다.\n" "\n" "만약 아직 리눅스용 파티션이 없다면, 새로 만들어야 합니다. 그러기 위해서는\n" "위에 있는 마법사를 사용하세요. 하드디스크의 설정에 따라 다음과 같은\n" "몇 가지의 방법이 있습니다:\n" "\n" " ○ 빈 공간 사용: 빈 디스크의 자동 파티션 분할 작업을 하게 됩니다.\n" "파티션 분할 작업에 대해 더 이상 신경쓸 필요가 없게 됩니다.\n" "\n" " ○ 기존 파티션 사용: 마법사가 기존의 리눅스 파티션을 발견한 경우입니다.\n" "기존의 파티션에다가 리눅스를 설치할려면, 이것을 선택하세요.\n" "\n" " ○ 윈도우즈 파티션의 빈 공간 사용: 만약 MS 윈도우즈가 설치되어 있고 모든 디스" "크 공간을 사용하고 있다면,\n" "리눅스용 공간을 새로 만들어야 합니다. 이렇게 하기위해서는, 윈도우즈 파티션을 " "지우거나(「전체 디스크 삭제」\n" "와 「전문가 모드」부분을 참조하세요.), 윈도우즈 파티션의 크기를 재조정하여 공" "간을 확보할 수 있습니다. 윈도우즈\n" "파티션의 재조정은 기존의 데이터를 파괴하지 않기 때문에, 윈도우즈와 리눅스 맨" "드레이크를 한 컴퓨터에서 함께\n" "사용하고자 한다면 이것이 권장되는 방법입니다.\n" "\n" "이 방법을 선택한다면, 윈도우즈 파티션의 크기가 현재보다 줄어들기 때문에 윈도" "우즈를\n" "사용할 때에는 소프트웨어를 설치하거나 데이터를 저장할 빈 공간이 그만큼 적어진" "다는\n" "것을 유념하세요.\n" "\n" " ○ 전체 디스크 삭제: 만약 디스크상의 모든 기존 파티션과 데이터를 삭제하고\n" "리눅스 맨드레이크를 위한 파티션으로 바꾸고 싶다면, 이것을 선택하세요.\n" "주의하세요: 일단 이렇게 하고나면 다시 되돌릴 수 없습니다.\n" "\n" " !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n" "\n" " ○ 윈도우즈 제거: 디스크상의 모든 파티션을 삭제하고, 초기화된 디스크 상태에" "서\n" "파티션 작업을 다시 합니다. 디스크상의 모든 데이터는 손실됩니다.\n" "\n" " !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n" "\n" " ○ 전문가 모드: 만약 수동으로 파티션 작업을 하고자 한다면, 이것을 선택하세" "요.\n" "이 방법은 대단히 강력하지만 또한 위험할 수 있다는 것을 명심하세요. 쉽게 데이" "터를\n" "잃어 버릴 수 있습니다. 전문적인 지식이 없다면, 이 방법은 절대 선택하지 마세" "요." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "설치를 완료하였습니다. 님의 GNU/리눅스 시스템은 이제 사용할 준비가\n" "되었습니다. 시스템을 다시 부팅하려면 「확인」을 누르세요.\n" "컴퓨터가 다시 부팅되면, (다중 부팅이 설정되었을 경우에) 님이 선호하는\n" "운영체제를 시작할 수 있습니다.\n" "\n" "「고급」버튼(점문가 모드에만 있음)을 누르면 두 개의 추가 버튼이 나타넙니다:\n" "\n" " ○ 「자동 설치 플로피 생성」: 님이 지금까지 설치한 내용을 관리자의 별다른\n" "도움없이 자동으로 전체 설치를 수행하게 하는\n" "자동 설치 플로피 디스크를 만듭니다.\n" "\n" " 주의: 버튼을 누르면 두 개의 개별적인 옵션이 나타납니다:\n" "\n" " ○ 「재생」: 파티션 나누기 작업만 제외하고, 나머지 과정은 자동설치로\n" "수행하는 자동설치 플로피를 만듭니다.\n" "\n" " ○ 「자동화」: 디스크상의 모든 데이터를 삭제하고 모든 파티션이 다시\n" "만들어지는 완벽한 자동 설치를 수행하는 플로피를 만듭니다.\n" "\n" " 이 기능을 사용하면, 많은 수의 비슷한 컴퓨터에 설치작업을 할 때 편리합니" "다.\n" " 자세한 정보는 저희 윕사이트의 자동설치관련 부분을 참조하세요.\n" "\n" " ○ 「팩키지 선택사항 저장」(*): 앞 단계에서 선택한 팩키지 목록을 저장합니" "다.\n" "또 다른 설치를 수행할 때, 플로피를 드라이브에 넣고, [F1]키를 눌러서\n" "설치 화면이 도움말 화면으로 들어가게 한후, 「linux defcfg=\"floppy\"」라고\n" "입력하세요.\n" "\n" "(*) 님은 FAT으로 포맷된 플로피 하나를 가지고 있어야 합니다.\n" " (리눅스에서 포맷하려면, 「mformat a:」명령을 사용하세요.)" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "새로 만들어진 파티션들은 포맷되어져야 합니다.\n" "(포맷이라 함은 파일 시스템을 만든다는 의미입니다.)\n" "\n" "지금 기존의 데이터를 삭제하기 위해서 기존 파티션들을\n" "다시 포맷할 수도 있습니다. 그렇게 하고 싶다면, 해당 파티션들도\n" "선택하세요.\n" "\n" "주의: 모든 기존 파티션들을 다시 포맷할 필요는 없습니다.\n" "(「/」,「/usr」,「/var」와 같은) 운영체제를 담고 있는 파티션들은\n" "다시 포맷하더라도, (「/home」과 같은) 데이터를 단고 있는 파티션들은\n" ", 기존 데이터를 보존하고 싶을 경우, 다시 포맷할 필요가 없습니다.\n" "\n" "파티션들을 선택할 때 주의하세요. 일단 포팩이 되고나면,\n" "선택됐던 파티션상에 존재했던 모든 데이터는 삭제되며,\n" "복구가 불가능해 집니다.\n" "\n" "포맷할 준비가 되었으면, 「확인」을 누르세요.\n" "\n" "맨드레이크 리눅스 설치용 파티션을 다시 선택하고 싶다면,\n" "「취소」를 누르세요.\n" "\n" "디스크상의 손상된 블럭을 체크하며 포맷하고 싶다면,\n" "「고급」을 누르세요." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "지금 새 리눅스 맨드레이크 운영체제를 설치하고 있습니다.\n" "이 작업을 끝내기 위해서는 시간이 좀 걸립니다.\n" "총소요 시간은 선택한 팩키지의 양과 컴퓨터 성능에 따라 크게 달라질 수 있습니" "다.\n" "\n" "인내심을 가지세요." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "더 진행하기 전에 사용자 계약서를 자세하게 읽어 보세요.\n" "사용자 계약서는 전체 맨드레이크 리눅스 배포본을 포괄하는 내용이며,\n" "만약 동의하지 않으신다면 「거부」버튼을 누르세요. 거부 버튼은 현재 설치를\n" "즉각 종료하게 합니다. 설치를 계속하고 싶다면 「동의」버튼을 누르세요." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "이제 컴퓨터의 보안 수준을 선택할 단계입니다.\n" "자유로운 사용을 위해서는 컴퓨터가 보다 더 많이 개방되어져야 하며,\n" "저장된 데이터의 중요성이 크면 클수록, 더 높은 보안 수준이 유지되어야 합니" "다.\n" "그러나 일반적으로 보다 높은 보안 수준은 보다 많은 사용상의 불편함을 감수해야" "만\n" "이루어질 수 있음을 유념하세요. 각 보안 수준이 의미하는 바에 대한 자세한 정보" "를\n" "알고 싶다면 「사용자 지침서」의 MSEC 장을 참조하세요.\n" "\n" "어느 것을 선택해야 할지 잘 모르겠다면, 기본값을 유지하세요." #: ../../help.pm_.c:442 #, fuzzy msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "이제 어느 파티션이 맨드레이크 리눅스의 설치용으로 사용되어야 할지를\n" "선택해야 합니다. 이전에 다른 GNU/리눅스를 설치한 적이 있거나, 다른 파티션\n" "도구를 사용하여 이미 파티션들이 정의되어 있다면, 기존 파티션을 그대로 사용\n" "할 수 있습니다. 그렇지 않다면 하드디스크의 파티션들을 지금 만들어야 합니다.\n" "\n" "파티션을 만들려면, 먼저 하드디스크를 선택하세요. 파티션을 만들여는 하드디스크" "가\n" "첫 번째 IDE 디스크라면 「hda」, 두 번째 IDE 디스크라면 「hdb」와 같은 식이" "며,\n" "첫 번째 SCSI 디스크라면 「sda」와 같은 식입니다.\n" "\n" "파티션을 나눌 때, 다음 옵션을 사용할 수 있습니다:\n" "\n" " ○ 「모두 삭제」: 선택된 디스크의 모든 기존 파티션을 삭제합니다.\n" "\n" " ○ 「자동 할당」: 선택된 디스크의 빈 공간에 자동으로 EXT2와 스왑 파티션을\n" "할당합니다.\n" "\n" " ○ 「파티션 테이블 복구」: 파티션 테이블이 손상되어 있을 경우, 이 옵션으로\n" "손산된 테이블을 복구합니다. !!주의!! 복구시도가 실패할 수도 있다는 것을\n" "명심하세요.\n" "\n" " ○ 「되돌리기」: 변경 사항을 취소합니다.\n" "\n" " ○ 「다시 읽기」: 모든 변경 사항을 취소하고, 초기 파티션 테이블을 다시 읽습" "니다.\n" "\n" " ○ 「마법사」: 마법사를 실행하여 파티션을 나눕니다. 파티션 나누기에 대한 지" "식이\n" "부족하다면, 이 옵션을 사용하세요.\n" "\n" " ○ 「플로피로부터 복구」: 이전에 플로피에 저장해둔 파티션 정보을 사용하여\n" "파티션 테이블을 복구합니다.\n" "\n" " ○ 「플로피에 저장」: 파티션 정보를 플로피에 저장합니다. 다음에 파티션 테이" "블을 복구할\n" "일이 생길 때 사용됩니다. 이 과정을 수행할 것을 권장하는 바입니다.\n" "\n" " ○ 「완료」: 파티션 나누기 작업을 끝마치면, 이 옵션으로 변경 사항을 저장합니" "다.\n" "\n" "정보: 키보드로 옵션을 선택할 수도 있습니다. 파티션들간의 이동은 [Tab]키와\n" "[Up/Down]키를 사용하세요.\n" "\n" "파티션을 선택하고 난 후에는 다음 키를 사용할 수 있습니다:\n" "\n" " ○ 「Ctrl + c」: (빈 파티션이 선택된 경우,) 새 파티션 만들기.\n" "\n" " ○ 「Ctrl + d」: 파티션 삭제하기.\n" "\n" " ○ 「Ctrl + m」: 마운트 위치 지정하기.\n" "\n" "만약 PPC 컴퓨터에서 설치하고 있는 중이라면, YABOOT 부트로더가 사용할 최소 " "1MB\n" "의 HFS 「부트스트랩」파티션을 만들 필요가 있습니다. 만약 그 파티션을 보다 크" "게\n" "(가령, 50MB) 만들면, 응급 상황시에 사용할 여분의 커널과 램디스크 이미지를\n" "저장할 수 있는 유용한 장소가 될 것입니다." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "둘 이상의 MS 윈도우즈 파티션이 디스크상에서 발견되었습니다.\n" "맨드레이크 리눅스 운영체제를 설치하기 위해 크기를 조정할\n" "파티션을 선택하세요.\n" "\n" "각 파티션은 다음과 같이 열거됩니다: 「리눅스 이름」,「윈도우즈 이름」,\n" "「용량」.\n" "\n" "「리눅스 이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n" "「파티션 번호」(가령, 「hda1」).\n" "\n" "「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n" "SCSI 디스크일 경우에는 「sd」입니다.\n" "\n" "「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n" "IDE 하드디스크의 경우:\n" "\n" " ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" " ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n" "\n" " ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n" "\n" "SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI " "ID」\n" "와 같은 식으로 의미를 가집니다.\n" "「윈도우즈 이름」은 MS 윈도우즈하에서의 이름입니다.\n" "(가령, 첫 번째 디스크 또는 파티션은 「C:」입니다.)" #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "기다려 주세요. 이 작업은 몇 분의 시간이 걸립니다." #: ../../help.pm_.c:547 #, fuzzy msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" "이제 님은 기본설치(「권장」) 방법과 보다 심도있는 선택을 할 수 있는\n" "「전문가」설치 방법 중 하나를 선택할지 결정해야야 합니다. 또한 새로운 설치" "와\n" "기존의 리눅스 맨드레이크 시스템의 업그레이드 중 하나를 선택할 수도 있습니" "다.\n" "현재 님의 상황에 적절한 것을 선택하세요.「설치」를 선택하게 되면\n" "기존의 시스템을 완전히 삭제하고 다시 설치하게 됩니다. 「업그레이드」를\n" "선택하게 되면 기존의 시스템을 최신 시스템으로 업그레이드 합니다.\n" "\n" "만약 이전 버전의 리눅스 맨드레이크가 설치되어 있지 않거나, \n" "여러 운영체제를 함께 사용하고 싶다면, 「설치」를 누르세요.\n" "\n" "만약 이미 설치된 이전 버전의 리눅스 맨드레이크를 업데이트하려면,\n" " 「업데이트」를 누르세요.\n" "\n" "님의 GNU/Linux에 대한 지식 수준에 따라, 님의 리눅스 맨드레이크를\n" "설치 또는 업데이트하는 다음과 같은 방법을 선택할 수 있습니다:\n" "\n" " ○ 권장: 만약 님이 GNU/Linux를 사용해 본 경험이 없다면, 이것을 선택하세요.\n" "설치과정은 아주 쉽고 님은 몇 개의 질문에만 답하면 됩니다.\n" "\n" " ○ 전문가: 만약 님이 GNU/Linux에 대한 대단한 지식을 가지고 있다면, 이것을 선" "택하세요.\n" "「사용자 정의」 설치처럼 주용도(워크스테이션, 서버, 개발)을 선택할 수 있습니" "다. \n" "이것을 선택하기에 앞서 매우 주의하세요. 님은 고도의 사용자 정의 설치를 수행하" "게 됩니다.\n" "GNU/Linux에 대해서 잘 모른다면, 질문에 답하기가 매우 어려울 수 있습니다.\n" "따라서 확신이 서지 않는다면 이 설치방법을 선택하지 마세요." #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" "일반적으로, 드레이크X는 (님이 선택한 언어에 기반하여) 올바른 키보드를\n" "자동으로 선택합니다. 그러나 님이 사용하는 언어에 정확히 일치하는 키보드를\n" "가지고 있지 않는 경우도 있을 수 있습니다: 가령, 영어를 사용하는 스위스인은\n" "여전히 스위스 키보드를 원할 수도 있습니다. 또한 영어를 사용하지만, 캐나다 퀘" "벡주에\n" "살고 있다면 또한 이러한 경우가 될 것입니다. 이런류의 경우라면, 이 단계에서\n" "적당한 키보드를 목록에서 선택해야 합니다.\n" "\n" "지원되는 모든 키보드 목록을 보려면, 「추가정보」를\n" "누르세요." #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" "설치시 그리고 시스템용으로 사용할 언어를 선택하세요.\n" "\n" "「고급」을 누르면, 다른 언어도 추가로 선택할 수 있습니다.\n" "다른 언어도 선택하게 되면, 그 언어와 관련된 시스템 문서 및 프로그램 파일들" "도\n" "설치하게 됩니다. 가령, 님의 시스템을 일본인도 사용할 수 있도록 하고 싶다면,\n" "목록에서 주 언어로 「한국어」를 선택하고, 「고급」에서 「일본어」에 해당하" "는\n" "회색 별표를 선택하세요.\n" "\n" "여러개의 추가 언어를 선택할 수도 있습니다. 언어 선택을 끝마쳤으면,\n" "「확인」을 눌러서 계속 진행하세요." #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" "기본적으로 드레이크X는 님이 2버튼 마우스를 사용한다고 가정할 것이며,\n" "세 번째 버튼은 에뮬레이션할 것입니다. 마우스가 PS/2, 시리얼, 혹은 USB용인지" "는\n" "드레이크X가 자동으로 알아낼 수 있습니다.\n" "\n" "만약 다른 마우스 유형을 지정하고 싶다면, 제공되는 목록에서 적당한 것을\n" "선택하세요.\n" "\n" "만약 다른 마우스를 선택하게 되면, 마우스 테스트 화면을 보게될 것입니다.\n" "그러면, 마우스 버튼과 휠을 조작하여 설정이 정확하게 되었는지 확인하세요.\n" "만약 제대로 작동하기 않으면,「취소」버튼 위에서 스페이스 키나 엔터 키를\n" "누르고 다시 선택하시기 바랍니다." #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "정확한 포트를 선택하세요. 예를 들어, MS 윈도우즈에서 COM1은\n" "리눅스에서는 ttyS0로 명명됩니다." #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "LILO(리눅스 로더)와 GRUB은 부트 로더입니다: 이것들은 시스템상의\n" "GBU/리눅스 또는 다른 운영체제를 부팅시키는데 사용됩니다.\n" "일반적으로, 리눅스가 아닌 다른 운영체제도 자동으로 감지되어\n" "설정됩니다. 그러나 만약 그렇지 못한 경우, 여기서 직접 항목을\n" "추가할 수 있습니다. 정확한 인자값을 선택하도록 주의하세요.\n" "\n" "또한 다른 사람이 특정 운영체제를 부팅하는 것을 막고 싶을 수도\n" "있을 것입니다. 그런 경우, 해당 항목을 지우세요. 그러나 그렇게하면,\n" "그 운영체제를 부팅하기 위해서는 부팅 디스크가 있어야 합니다!" #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "GNU/리눅스를 부팅하는데 필요한 정보를 어디에 위치시킬 것인지\n" "지정해 주세요.\n" "\n" "지금 무엇을 묻고 있는지 조차 모르겠다면,\n" "「디스크의 첫 섹터(MBR)」를 선택하세요." #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" #: ../../help.pm_.c:759 #, fuzzy msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" "드레이크X가 시스템상에 있는 모든 하드 디스크를 검색하고\n" "또한 PCI SCSI 어댑터 탐지를 시도할 것입니다.\n" "만약 드레이크X가 장치를 발견하게 되면 자동으로\n" "올바른 드라이버를 설치할 것입니다.\n" "\n" "드레이크X의 장치 검색이 실패하더라도, 님께 SCSI 장치의 유무를 질문하게 됩니" "다.\n" "목록에서 장치를 직접 선택하려면 「예」를, SCSI 장치가 없다면 「아니오」를 선" "택하세요.\n" "잘 모르겠다면, 「하드웨어 정보 보기」를 선택한 후 「확인」을 눌러서\n" "시스템상에 존재하는 하드웨어들을 살펴볼 수도 있습니다.\n" "하드웨어에 대한 검토가 끝나면 다시 「확인」버튼을 눌러서 SCSI 인터페이스 질" "문 화면\n" "으로 돌아 올 수 있습니다.\n" "\n" "직접 어댑터를 지정해야 할 때에는, 드레이크X가 옵션을 지정할 것인지를 물어\n" "볼 것입니다. 이 때는 드레이크X가 필요한 옵션을 탐지하도록 하는 것이 좋습니" "다.\n" "일반적으로 이 방법은 잘 작동합니다.\n" "\n" "\n" "만약 그렇지 않다면, 직접 드라이버 옵션을 지정해야 합니다. 사용자 설명서(3" "장, \n" "「하드웨어에 대한 종합정보」색션)를 참조하여, 하드웨어 설명서, \n" "(인터넷에 연결할 수 있다면) 제조업체 웹 사이트, \n" "또는 (윈도우즈가 설치되어 있다면) MS 윈도우즈에서 어떻게 여기에 필요한 \n" "정보를 알아 낼 수 있는지 찾아 보세요." #: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" #: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../help.pm_.c:860 #, fuzzy msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" "님의 시스템에 관한 다양한 인자들을 보이고 있습니다. 설치된 하드웨에 따라\n" "아래에 설명되는 항목들 중 일부는 보이지 않을 수 있습니다:\n" "\n" " ○ 「마우스」: 현재 마우스 설정을 확인하고, 필요하다면 클릭하여\n" "마우스를 변경하세요.\n" "\n" " ○ 「키보드」: 현재 키보드 맵을 확인하고, 필요하다면 클릭하여\n" "키보드를 변경하세요.\n" "\n" " ○ 「지역시간대」: 드레이크X는 님이 선택한 언어에 따라 자동으로\n" "지역시간대를 선택합니다. 그러나, 키보드도 그러하지만, 님은 현재 선택된\n" "언어와 일치하는 국가에 거주하고 있지 않을 수도 있습니다.\n" "그러하다면, 「지역시간대」를 클릭하여, 님이 현재 거주하고 있는\n" "지역의 시간대에 맞게 시간을 설정하세요.\n" "\n" " ○ 「프린터」: 「프린터 없음」을 누르면, 프린터 설정 마법사가\n" "시작될 것입니다.\n" "\n" " ○ 「사운드 카드」: 만약 사운드 카드가 감지되었다면, 여기에 나타날\n" "것입니다. 설치 중에 변경하는 것은 불가능합니다.\n" "\n" " ○ 「TV 카드」: 만약 TV 카드가 감지되었다면, 여기에 나타날 것입니다.\n" "설치 중에 변경하는 것은 불가능합니다.\n" "\n" " ○ 「ISDN 카드」: 만약 ISDN 카드가 감지되었다면, 여기에 나타날\n" "것입니다. 버튼을 클릭하여 관련 인자을 변경할 수도\n" "있습니다." #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "맨드레이크 리눅스 파티션을 만들기 위해서 삭제할 하드디스클르 선택하세요.\n" "주의:\n" "디스크상의 모든 데이터는 손실되며, 영원히 복구가 불가능해 집니다!" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "이 하드디스크상의 모든 데이터와 파티션을 삭제하려면, 「확인」을 누르세요.\n" "!!주의하세요!!일단 「확인」을 누르게 되면, MS 윈도우즈 데이털르 포함하여 이 " "디스트상의 모든\n" "데이터와 파티션은 복구가 불가능해 집니다.\n" "\n" "이 작업을 취소하려면, 지금 「취소」를 누르세요. 어떠한 데이터와 파티션도\n" "손상되지 않을 것입니다." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "다음과 같은 서버들이 선택되었습니다: %s\n" "\n" "\n" "이 서버들은 기본적으로 활성화됩니다. 비록 아직까지 알려진 보안 문제는 없지" "만,\n" "새로운 문제점이 발견될 수도 있습니다. 그럴 경우에는 가능한 한 신속하게\n" "업그레이드해야 합니다.\n" "\n" "\n" "정말로 이 서버들을 설치합니까?\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "NIS 도메인 없이는 브로드케스트를 사용할 수 없습니다." #: ../../install_any.pm_.c:879 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "플로피 디스크를 %s 드라이브에 넣으세요" #: ../../install_any.pm_.c:883 msgid "This floppy is not FAT formatted" msgstr "이 플로피 디스크는 FAT 포맷이 아닙니다." #: ../../install_any.pm_.c:895 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "이 저장된 팩키지 선택목록을 사용할려면, ``linux defcfg=floppy''라고 입력하여 " "설치을 시작하세요." #: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "%s 파일을 읽는중 오류가 발생했습니다." #: ../../install_any.pm_.c:1040 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "오류 발생 - 새로운 파일 시스템을 만들 어떤 올바른 장치도 찾을 수 없습니다.이 " "문제를 해결하시려면, 하드웨어를 점검해 보시기 바랍니다." #: ../../install_interactive.pm_.c:21 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "「상업용」드라이버를 필요로하는 일부 하드웨어가 시스템상에 있습니다.\n" "자세한 정보는 다음을 참조하세요: %s" #: ../../install_interactive.pm_.c:56 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "루트 파티션이 반드시 필요합니다.\n" "이를 위해서, 파티션을 생성하세요. (이미 있는 파티션을 클릭하거나).\n" "그리고 나서, ``마운트 위치''를 클릭한후 '/'으로 설정하세요." #: ../../install_interactive.pm_.c:61 msgid "You must have a swap partition" msgstr "스왑 파티션은 반드시 필요합니다." #: ../../install_interactive.pm_.c:62 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "스왑 파티션이 없습니다.\n" "\n" "계속 진행합니까?" #: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "「/boot/efi」에 마운트된 FAT 파티션이 있어야만 합니다." #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "빈 공간 사용" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "새로운 파티션을 만들 수 있는 공간이 부족합니다." #: ../../install_interactive.pm_.c:100 msgid "Use existing partitions" msgstr "기존의 파티션 사용" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "사용할 기존의 파티션이 없습니다." #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "윈도우즈 파티션을 루프백으로 사용" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "어느 파티션을 Linux4Win용으로 사용하겠습니까?" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "크기 선택" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "루트 파티션 크기(MB): " #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "스왑 파티션 크기(MB): " #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "윈도우즈 파티션의 빈 공간 사용하세요." #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "어떤 파티션의 크기를 조정하시겠습니까?" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "윈도우즈 파일 시스템의 범위 계산중" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT 크기 조정기가 님의 파티션을 처리할 수 없습니다.\n" "다음의 오류가 발생했습니다: %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "윈도우즈 파티션이 심하게 조각나 있습니다. 먼저 ``디스크 조각 모음''을 하세요." #: ../../install_interactive.pm_.c:138 #, fuzzy msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "경고!\n" "\n" "드레이크X가 이제 윈도우즈 파티션의 크기를 조정할 것입니다. 이 작동은 \n" "위험합니다. 아직 시작하지 않았다면, 설치를 중단하고 윈도우즈에서\n" "디스크검사」(가능하다면 또한 「디스크 조각모음」)를 실행한 후에,\n" "설치를 다시 시작하세요. 또한 데이터도 백업해 두세요.\n" "준비됐으면, 「확인」을 누르세요." #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "윈도우즈용으로 어느 용량을 유지하시겠습니까?" #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "파티션 %s" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT크기조정 실패: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "loopback로 사용하거나 크기를 조정할 FAT 파티션이 없습니다. (또는 디스크 공간" "이 부족합니다.)" #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "전체 디스크 삭제" #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "윈도우즈(TM) 제거" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "하드 드라이브가 하나 이상 있습니다. 어느 것에 리눅스를 설치하시겠습니까?" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s 드라이브 상의 모든 기존 파티션과 데이터가 손실될 것입니다." #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "사용자 정의 파티션 나누기" #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "fdisk 사용" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "이제 %s의 파티션 작업을 할 수 있습니다.\n" "마친 후, 'w'를 눌러 저장하는것을 잊지마세요." #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "윈도우즈 파티션에 충분한 공간이 없습니다." #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "설치에 필요한 공간을 찾을 수 없습니다." #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "드레이크X 파티션 마법사가 다음의 솔루션을 발견했습니다:" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "파티션 나누기 실패: %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "네트웍 활성화 중..." #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "네트웍 해제 중..." #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "오류가 발생했습니다. 그러나 적절히 처리할 수 없습니다.\n" "위헝을 감수할려면 계속하세요." #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "마운트 포인트 중복 %s" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "일부 중요한 팩키지들이 올바르게 설치되지 않았습니다.\n" "CDROM 드라이브 또는 미디어가 손상되었습니다.\n" "이미 설치가 완료된 컴퓨터에서 「rpm -qpl Mandrake/RPMS/*.rpm」명령으로 점검" "해 보세요.\n" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "%s에 오신것을 환영합니다." #: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769 msgid "No floppy drive available" msgstr "플로피 드라이브를 사용할 수 없습니다." #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "%s 단계로 넘어갑니다.\n" #: ../../install_steps_gtk.pm_.c:146 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "시스템의 자원이 부족합니다. 리눅스 맨드레이크를 설치하는데 일부 문제가 발생" "할\n" "수도 있습니다. 만약 문제가 발생하면, 택스트 모드로 설치를 시도해 보세요.\n" "텍스트 모드로 설치하려면, CDROM으로 부팅후 「F1」을 누르고 「text」라고 입력" "하세요." #: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237 msgid "Install Class" msgstr "설치 유형" #: ../../install_steps_gtk.pm_.c:160 #, fuzzy msgid "Please choose one of the following classes of installation:" msgstr "다음 설치 유형중 하나를 선택해 주세요." #: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683 msgid "Package Group Selection" msgstr "팩키지 그룹 선택" #: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698 msgid "Individual package selection" msgstr "개별 팩키지 선택" #: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621 #, c-format msgid "Total size: %d / %d MB" msgstr "전체 크기: %d / %d MB" #: ../../install_steps_gtk.pm_.c:334 msgid "Bad package" msgstr "잘못된 팩키지" #: ../../install_steps_gtk.pm_.c:335 #, c-format msgid "Name: %s\n" msgstr "이름: %s\n" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Version: %s\n" msgstr "버젼: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Size: %d KB\n" msgstr "크기: %d KB\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Importance: %s\n" msgstr "중요성: %s\n" #: ../../install_steps_gtk.pm_.c:360 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "디스크 공간이 부족하기 때문에 이 팩키지를 선택할 수 없습니다." #: ../../install_steps_gtk.pm_.c:365 msgid "The following packages are going to be installed" msgstr "다음 팩키지들이 설치될 것입니다." #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be removed" msgstr "다음 팩키지들이 제거될 것입니다." #: ../../install_steps_gtk.pm_.c:378 msgid "You can't select/unselect this package" msgstr "이 팩키지를 선택/버림 할수 없습니다." #: ../../install_steps_gtk.pm_.c:390 msgid "This is a mandatory package, it can't be unselected" msgstr "이것은 필수적인 팩키지입니다. 반드시 선택되어야 합니다." #: ../../install_steps_gtk.pm_.c:392 msgid "You can't unselect this package. It is already installed" msgstr "이 팩키지를 선택해제할 수 없습니다. 이미 설치 되었습니다." #: ../../install_steps_gtk.pm_.c:395 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "이 팩키지는 반드시 업그레이드되어야 합니다.\n" "정말로 선택을 해제하시겠습니까?" #: ../../install_steps_gtk.pm_.c:398 msgid "You can't unselect this package. It must be upgraded" msgstr "이 팩키지를 선택해제할수 없습니다. 반드시 업그레이드되어야 합니다." #: ../../install_steps_gtk.pm_.c:403 msgid "Show automatically selected packages" msgstr "자동으로 선택된 팩키지들 보이기" #: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 #: ../../standalone/drakbackup_.c:4211 msgid "Install" msgstr "설치" #: ../../install_steps_gtk.pm_.c:407 msgid "Load/Save on floppy" msgstr "플로피에 저장/적재" #: ../../install_steps_gtk.pm_.c:408 msgid "Updating package selection" msgstr "선택된 팩키지 목록 업데이트 중" #: ../../install_steps_gtk.pm_.c:413 msgid "Minimal install" msgstr "최소 설치" #: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529 msgid "Choose the packages you want to install" msgstr "설치하고자 하는 팩키지를 선택하세요." #: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767 msgid "Installing" msgstr "설치중" #: ../../install_steps_gtk.pm_.c:450 msgid "Estimating" msgstr "계산 중" #: ../../install_steps_gtk.pm_.c:457 msgid "Time remaining " msgstr "남은 시간 " #: ../../install_steps_gtk.pm_.c:469 msgid "Please wait, preparing installation..." msgstr "설치 준비중입니다. 잠시 기다리세요." #: ../../install_steps_gtk.pm_.c:551 #, c-format msgid "%d packages" msgstr "%d 팩키지" #: ../../install_steps_gtk.pm_.c:556 #, c-format msgid "Installing package %s" msgstr "%s 팩키지 설치중" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 #: ../../standalone/drakautoinst_.c:197 msgid "Accept" msgstr "동의" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 msgid "Refuse" msgstr "거부" #: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "CDROM을 바꿔 주세요!\n" "\n" "「%s」라고 쓰여진 CDROM을 드라이브에 넣은 후, 「확인」을 눌러 주세요.\n" "만약 CDROM을 가지고 있지 않다면, 「취소」를 눌러 추가 설치를 취소하세요." #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612 #: ../../install_steps_interactive.pm_.c:804 #: ../../install_steps_interactive.pm_.c:808 msgid "Go on anyway?" msgstr "계속 진행합니까?" #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804 msgid "There was an error ordering packages:" msgstr "팩키지를 정렬하는 중 오류발생:" #: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808 msgid "There was an error installing packages:" msgstr "다음 팩키지를 설치중 오류가 발생했습니다: " #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "오류 발생" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "정말로 설치를 그만 두겠습니까?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "사용 동의서" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_interactive.pm_.c:197 msgid "Are you sure you refuse the licence?" msgstr "" #: ../../install_steps_interactive.pm_.c:217 #: ../../install_steps_interactive.pm_.c:995 #: ../../standalone/keyboarddrake_.c:25 msgid "Keyboard" msgstr "키보드" #: ../../install_steps_interactive.pm_.c:218 msgid "Please choose your keyboard layout." msgstr "키보드 레이아웃 선택을 선택하세요." #: ../../install_steps_interactive.pm_.c:219 msgid "Here is the full list of keyboards available" msgstr "지원되는 키보드 목록이 여기에 있습니다." #: ../../install_steps_interactive.pm_.c:237 msgid "Which installation class do you want?" msgstr "설치 유형을 선택해 주세요." #: ../../install_steps_interactive.pm_.c:241 msgid "Install/Update" msgstr "설치/업데이트" #: ../../install_steps_interactive.pm_.c:241 msgid "Is this an install or an update?" msgstr "설치합니까 아니면 업데이트 합니까?" #: ../../install_steps_interactive.pm_.c:250 msgid "Recommended" msgstr "권장" #: ../../install_steps_interactive.pm_.c:253 #: ../../install_steps_interactive.pm_.c:256 msgid "Expert" msgstr "전문가" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade" msgstr "업그레이드" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade packages only" msgstr "팩키지만 업그레이드" #: ../../install_steps_interactive.pm_.c:282 msgid "Please choose the type of your mouse." msgstr "마우스 종류를 선택하세요." #: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52 msgid "Mouse Port" msgstr "마우스 포트" #: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53 msgid "Please choose on which serial port your mouse is connected to." msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../install_steps_interactive.pm_.c:297 msgid "Buttons emulation" msgstr "버튼 에뮬레이션" #: ../../install_steps_interactive.pm_.c:299 msgid "Button 2 Emulation" msgstr "버튼 2 에뮬레이션" #: ../../install_steps_interactive.pm_.c:300 msgid "Button 3 Emulation" msgstr "버튼 3 에뮬레이션" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring PCMCIA cards..." msgstr "PCMCIS 카드 환경설정중..." #: ../../install_steps_interactive.pm_.c:321 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:328 msgid "Configuring IDE" msgstr "IDE 설정중" #: ../../install_steps_interactive.pm_.c:328 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:345 msgid "No partition available" msgstr "사용가능한 파티션이 없습니다." #: ../../install_steps_interactive.pm_.c:348 msgid "Scanning partitions to find mount points" msgstr "마운트 위치를 찾기위해 파티션들을 검색 중" #: ../../install_steps_interactive.pm_.c:356 msgid "Choose the mount points" msgstr "마운트 위치를 선택해 주세요." #: ../../install_steps_interactive.pm_.c:386 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "1MB 부트스트랩 공간 부족! 설치는 계속할 수 있지만, 시스템을 부팅하기 위해서" "는 디스크드레이크에서 부트스트랩 파티션을 만들어야 합니다." #: ../../install_steps_interactive.pm_.c:395 msgid "No root partition found to perform an upgrade" msgstr "업그레이드할 루트 파티션을 찾을 수 없습니다." #: ../../install_steps_interactive.pm_.c:396 msgid "Root Partition" msgstr "루트 파티션" #: ../../install_steps_interactive.pm_.c:397 msgid "What is the root partition (/) of your system?" msgstr "시스템에서 루트 파티션(/)은 어떤것입니까?" #: ../../install_steps_interactive.pm_.c:411 msgid "You need to reboot for the partition table modifications to take place" msgstr "파티션 테이블 변경사항을 적용하려면 리부팅을 해야 합니다." #: ../../install_steps_interactive.pm_.c:435 msgid "Choose the partitions you want to format" msgstr "포맷할 파티션을 선택하세요" #: ../../install_steps_interactive.pm_.c:436 msgid "Check bad blocks?" msgstr "배드 블럭 검사를 합니까?" #: ../../install_steps_interactive.pm_.c:463 msgid "Formatting partitions" msgstr "파티션 포맷" #: ../../install_steps_interactive.pm_.c:465 #, c-format msgid "Creating and formatting file %s" msgstr "%s 파일를 생성하고 포맷" #: ../../install_steps_interactive.pm_.c:470 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm_.c:472 msgid "Not enough swap space to fulfill installation, please add some" msgstr "스왑 메모리가 부족합니다. 좀 더 추가하세요." #: ../../install_steps_interactive.pm_.c:479 msgid "Looking for available packages and rebuilding rpm database..." msgstr "유효한 팩키지 검색 및 RPM 데이터베이스 재조합 중..." #: ../../install_steps_interactive.pm_.c:480 msgid "Looking for available packages..." msgstr "유효한 팩키지를 찾고 있습니다." #: ../../install_steps_interactive.pm_.c:483 msgid "Looking at packages already installed..." msgstr "이미 설치된 팩키지 찾는 중..." #: ../../install_steps_interactive.pm_.c:487 msgid "Finding packages to upgrade..." msgstr "업그레이드할 팩키지를 검색중입니다." #: ../../install_steps_interactive.pm_.c:505 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "설치 또는 업그레이드를 위한 디스크 공간이 부족합니다. (%d > %d)" #: ../../install_steps_interactive.pm_.c:541 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "플로피에 팩키지 선택목록을 적재 또는 저장할지를 선택하세요.\n" "형식(포맷)은 자동설치 생성 플로피와 동일합니다." #: ../../install_steps_interactive.pm_.c:543 msgid "Load from floppy" msgstr "플로피에서 읽기" #: ../../install_steps_interactive.pm_.c:543 msgid "Save on floppy" msgstr "플로피에 저장" #: ../../install_steps_interactive.pm_.c:547 msgid "Loading from floppy" msgstr "플로피에서 읽는 중" #: ../../install_steps_interactive.pm_.c:547 msgid "Package selection" msgstr "팩키지 선택" #: ../../install_steps_interactive.pm_.c:552 msgid "Insert a floppy containing package selection" msgstr "팩키지 선택목록 플로피 디스크를 넣으세요." #: ../../install_steps_interactive.pm_.c:634 msgid "Selected size is larger than available space" msgstr "선택된 용량이 사용할 수 있는 공간보다 큽니다." #: ../../install_steps_interactive.pm_.c:649 msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm_.c:650 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm_.c:653 msgid "With X" msgstr "" #: ../../install_steps_interactive.pm_.c:655 msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm_.c:656 msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm_.c:741 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "만약 아래에 열거된 모든 CD를 가지고 있다면, 「확인」을, \n" "전혀 가지고 있지 않다면, 「취소」를, \n" "일부만 가지고 있다면, 없는 CD를 선택해제한 후에 「확인」을 누르세요." #: ../../install_steps_interactive.pm_.c:746 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "「%s」라고 표시된 CDROM" #: ../../install_steps_interactive.pm_.c:767 msgid "Preparing installation" msgstr "설치 준비중입니다" #: ../../install_steps_interactive.pm_.c:776 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" " %s 팩키지 설치 중... \n" "%d%%" #: ../../install_steps_interactive.pm_.c:822 msgid "Post-install configuration" msgstr "설치전 환경설정" #: ../../install_steps_interactive.pm_.c:828 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "부팅 플로피를 %s 드라이브에 넣으세요" #: ../../install_steps_interactive.pm_.c:834 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "업데이트 모듈 플로피를 %s 드라이브에 넣으세요" #: ../../install_steps_interactive.pm_.c:861 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm_.c:876 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "유효한 미러 목록을 받기 위해 맨드레이크 리눅스 웹사이트에 접속 중..." #: ../../install_steps_interactive.pm_.c:881 msgid "Choose a mirror from which to get the packages" msgstr "팩키지를 받을 미러 사이트를 선택해 주세요." #: ../../install_steps_interactive.pm_.c:890 msgid "Contacting the mirror to get the list of available packages..." msgstr "사용가능한 팩키지의 리스트를 미러 사이트에 접속해서 받습니다." #: ../../install_steps_interactive.pm_.c:918 msgid "Which is your timezone?" msgstr "님의 시간대는 어디입니까?" #: ../../install_steps_interactive.pm_.c:923 msgid "Hardware clock set to GMT" msgstr "하드웨어 시계 GMT 설정" #: ../../install_steps_interactive.pm_.c:924 msgid "Automatic time synchronization (using NTP)" msgstr "자동 시간 동기화 (NTP 사용)" #: ../../install_steps_interactive.pm_.c:931 msgid "NTP Server" msgstr "NTP 서버" #: ../../install_steps_interactive.pm_.c:965 #: ../../install_steps_interactive.pm_.c:972 msgid "Remote CUPS server" msgstr "원격 CUPS 서버" #: ../../install_steps_interactive.pm_.c:966 msgid "No printer" msgstr "프린터 없음" #: ../../install_steps_interactive.pm_.c:982 msgid "Do you have an ISA sound card?" msgstr "ISA 사운드 카드가 있습니까?" #: ../../install_steps_interactive.pm_.c:984 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:986 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27 msgid "Summary" msgstr "요약설명" #: ../../install_steps_interactive.pm_.c:994 msgid "Mouse" msgstr "마우스" #: ../../install_steps_interactive.pm_.c:996 msgid "Timezone" msgstr "시간대" #: ../../install_steps_interactive.pm_.c:997 #: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844 msgid "Printer" msgstr "프린터" #: ../../install_steps_interactive.pm_.c:999 msgid "ISDN card" msgstr "ISDN 카드" #: ../../install_steps_interactive.pm_.c:1003 #: ../../install_steps_interactive.pm_.c:1009 msgid "Sound card" msgstr "사운드 카드" #: ../../install_steps_interactive.pm_.c:1012 msgid "TV card" msgstr "TV 카드" #: ../../install_steps_interactive.pm_.c:1055 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1084 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1056 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1093 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1057 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1107 msgid "Windows Domain" msgstr "윈도우즈 도메인" #: ../../install_steps_interactive.pm_.c:1058 #: ../../install_steps_interactive.pm_.c:1080 msgid "Local files" msgstr "지역 파일들" #: ../../install_steps_interactive.pm_.c:1067 #: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24 msgid "Set root password" msgstr "root 암호 설정" #: ../../install_steps_interactive.pm_.c:1069 msgid "No password" msgstr "암호 없음" #: ../../install_steps_interactive.pm_.c:1074 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "이 암호는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)" #: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72 #: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144 msgid "Authentication" msgstr "사용자 인증" #: ../../install_steps_interactive.pm_.c:1088 msgid "Authentication LDAP" msgstr "인증 LDAP" #: ../../install_steps_interactive.pm_.c:1089 msgid "LDAP Base dn" msgstr "LDAP 기반 DN" #: ../../install_steps_interactive.pm_.c:1090 msgid "LDAP Server" msgstr "LDAP 서버" #: ../../install_steps_interactive.pm_.c:1096 msgid "Authentication NIS" msgstr "인증 NIS" #: ../../install_steps_interactive.pm_.c:1097 msgid "NIS Domain" msgstr "NIS 도메인" #: ../../install_steps_interactive.pm_.c:1098 msgid "NIS Server" msgstr "NIS 서버" #: ../../install_steps_interactive.pm_.c:1104 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm_.c:1106 msgid "Authentication Windows Domain" msgstr "인증 윈도우즈 도메인" #: ../../install_steps_interactive.pm_.c:1108 msgid "Domain Admin User Name" msgstr "도메인 관리자 사용자명" #: ../../install_steps_interactive.pm_.c:1109 msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm_.c:1144 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../install_steps_interactive.pm_.c:1160 msgid "First floppy drive" msgstr "첫번째 플로피 드라이브" #: ../../install_steps_interactive.pm_.c:1161 msgid "Second floppy drive" msgstr "두번째 플로피 드라이브" #: ../../install_steps_interactive.pm_.c:1162 #: ../../printer/printerdrake.pm_.c:2397 msgid "Skip" msgstr "건너뛰기" #: ../../install_steps_interactive.pm_.c:1167 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "부트 디스크는 일반적인 부트로더를 사용하지 않고, 리눅스 시스템으로 부팅하는\n" "방법을 제공합니다. 만약 LILO(또는 Grub)를 사용하지 않거나, 다른 운영체제가\n" "LILO를 제거하거나 또는 LILO가 하드웨어 설정과 맞지 않을 때, 유용합니다.\n" "부트 디스크는 또한 맨드레이크 복구 이미지와 함께 사용되어 심각한\n" "시스템 문제를 쉽게 복구할 수 있습니다. 님의 시스템을 위한 부트 디스크를\n" "만드시겠습니까?\n" "%s" #: ../../install_steps_interactive.pm_.c:1173 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../install_steps_interactive.pm_.c:1181 msgid "Sorry, no floppy drive available" msgstr "죄송합니다. 사용가능한 플로피 드라이브가 없습니다." #: ../../install_steps_interactive.pm_.c:1185 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "부트 디스크를 만들때 사용할 플로피 드라이브를 선택해 주세요" #: ../../install_steps_interactive.pm_.c:1189 #, c-format msgid "Insert a floppy in %s" msgstr "%s에 프로피를 넣으세요." #: ../../install_steps_interactive.pm_.c:1192 msgid "Creating bootdisk..." msgstr "부트 디스크 생성중" #: ../../install_steps_interactive.pm_.c:1199 msgid "Preparing bootloader..." msgstr "부트 로더 준비중" #: ../../install_steps_interactive.pm_.c:1210 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" #: ../../install_steps_interactive.pm_.c:1216 msgid "Do you want to use aboot?" msgstr "aboot를 사용하시겠습니까?" #: ../../install_steps_interactive.pm_.c:1219 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "aboot 설치 실패. \n" "첫번째 파티션을 훼손할지라도 강제 설치할까요?" #: ../../install_steps_interactive.pm_.c:1226 msgid "Installing bootloader" msgstr "부트로더 설치 중" #: ../../install_steps_interactive.pm_.c:1232 msgid "Installation of bootloader failed. The following error occured:" msgstr "부트로더 설치가 실패했습니다. 다음과 같은 오류가 발생했습니다:" #: ../../install_steps_interactive.pm_.c:1240 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "부트로더가 제대로 작동하기 위해서는 공개 펌웨어 부트 장치를 변경할 필요성이\n" "있을 수도 있습니다. 만약 재부팅후에 부트로더 프롬프트가 나타나지 않는다면,\n" "재부팅시에 명령-옵션-O-F를 계속 누르고 있다가 다음과 같이 입력하세요:\n" "setenv boot-device %s,\\\\:tbxi\n" "shut-down\n" "그러고나면 다음부터는 부트로더 프롬프트를 볼 수 있을 것입니다." #: ../../install_steps_interactive.pm_.c:1274 #: ../../standalone/drakautoinst_.c:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "%s 드라이브에 빈 플로피 디스크를 넣으세요" #: ../../install_steps_interactive.pm_.c:1278 msgid "Creating auto install floppy..." msgstr "자동 설치 플로피 디스크 생성 중" #: ../../install_steps_interactive.pm_.c:1289 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "몇몇 단계가 완전히 끝나지 않았습니다.\n" "\n" "정말 지금 종료 하시겠습니까?" #: ../../install_steps_interactive.pm_.c:1300 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "축하합니다. 설치가 성공적으로 끝났습니다.\n" "부트 미디어를 제거하고 리턴을 눌러서 리부팅 하세요.\n" "\n" "\n" "이 버전의 맨드레이크 리눅스의 버그수정 정보는\n" "%s\n" "에서 얻으실 수 있습니다.\n" "\n" "\n" "설치후 시스템 설정에 대한 정보는 공식 맨드레이크 리눅스 유저 가이드를\n" "참고하시기 바랍니다." #: ../../install_steps_interactive.pm_.c:1313 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../install_steps_interactive.pm_.c:1318 msgid "Generate auto install floppy" msgstr "자동 설치 플로피 디스크 생성" #: ../../install_steps_interactive.pm_.c:1320 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "자동 설치는 원한다면 완벽한 자동화가 가능합니다.\n" "이럴 경우, 하드 드라이브를 점유해 버립니다!\n" "(이것은 또 다른 컴퓨터에 동일하게 설치할 때를 위한 것입니다.)\n" "\n" "일반적으로 직접 설치하는 것이 좋습니다.\n" #: ../../install_steps_interactive.pm_.c:1325 msgid "Automated" msgstr "자동" #: ../../install_steps_interactive.pm_.c:1325 msgid "Replay" msgstr "재시도" #: ../../install_steps_interactive.pm_.c:1328 msgid "Save packages selection" msgstr "선택된 팩키지 목록 저장" #: ../../install_steps_newt.pm_.c:20 #, c-format msgid "Mandrake Linux Installation %s" msgstr "리눅스-맨드레이크 설치 %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" " / 항목간 이동 | 선택 | 다음 화면" #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "kdesu가 없음" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "파일 선택" #: ../../interactive.pm_.c:318 msgid "Advanced" msgstr "고급" #: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117 msgid "Basic" msgstr "" #: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158 #: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434 msgid "<- Previous" msgstr "<- 이전" #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087 #: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143 msgid "Next" msgstr "다음" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "잘못된 선택입니다, 다시 하세요\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "님의 선택은? (기본값 %s) " #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "님의 선택은? (0/1 기본값 「%s」) " #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" msgstr "버튼 「%s」: %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" msgstr "이 버튼을 누르시겠습니까?" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "님의 선택은? (기본값 「%s」%s) " #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "재전송" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188 msgid "Czech (QWERTZ)" msgstr "체코 (QWERTZ)" #: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190 msgid "German" msgstr "독일" #: ../../keyboard.pm_.c:155 msgid "Dvorak" msgstr "드보락" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Spanish" msgstr "스페인" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "Finnish" msgstr "핀란드" #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200 msgid "French" msgstr "프랑스" #: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233 msgid "Norwegian" msgstr "노르웨이" #: ../../keyboard.pm_.c:160 msgid "Polish" msgstr "폴란드" #: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241 msgid "Russian" msgstr "러시아" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243 msgid "Swedish" msgstr "스웨덴" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259 msgid "UK keyboard" msgstr "영국" #: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260 msgid "US keyboard" msgstr "미국" #: ../../keyboard.pm_.c:167 msgid "Albanian" msgstr "알바니아" #: ../../keyboard.pm_.c:168 msgid "Armenian (old)" msgstr "미국 (구버전)" #: ../../keyboard.pm_.c:169 msgid "Armenian (typewriter)" msgstr "미국 (타자기)" #: ../../keyboard.pm_.c:170 msgid "Armenian (phonetic)" msgstr "미국 (음성학)" #: ../../keyboard.pm_.c:175 msgid "Azerbaidjani (latin)" msgstr "Azerbaidjani (라틴)" #: ../../keyboard.pm_.c:177 msgid "Belgian" msgstr "벨기에" #: ../../keyboard.pm_.c:178 #, fuzzy msgid "Bengali" msgstr "허용" #: ../../keyboard.pm_.c:179 msgid "Bulgarian (phonetic)" msgstr "불가리아 (음성학)" #: ../../keyboard.pm_.c:180 msgid "Bulgarian (BDS)" msgstr "불가리아 (BDS)" #: ../../keyboard.pm_.c:181 msgid "Brazilian (ABNT-2)" msgstr "브라질 (ABNT-2)" #: ../../keyboard.pm_.c:184 #, fuzzy msgid "Bosnian" msgstr "에스토니아" #: ../../keyboard.pm_.c:185 msgid "Belarusian" msgstr "벨라루시아" #: ../../keyboard.pm_.c:186 msgid "Swiss (German layout)" msgstr "스위스 (독어)" #: ../../keyboard.pm_.c:187 msgid "Swiss (French layout)" msgstr "스위스 (불어)" #: ../../keyboard.pm_.c:189 msgid "Czech (QWERTY)" msgstr "체코 (QWERTY)" #: ../../keyboard.pm_.c:191 msgid "German (no dead keys)" msgstr "독일 (dead 키 없음)" #: ../../keyboard.pm_.c:192 msgid "Devanagari" msgstr "" #: ../../keyboard.pm_.c:193 msgid "Danish" msgstr "덴마크" #: ../../keyboard.pm_.c:194 msgid "Dvorak (US)" msgstr "드보락(US)" #: ../../keyboard.pm_.c:195 msgid "Dvorak (Norwegian)" msgstr "드보락(노르웨이)" #: ../../keyboard.pm_.c:196 msgid "Dvorak (Swedish)" msgstr "드보락(스웨덴)" #: ../../keyboard.pm_.c:197 msgid "Estonian" msgstr "에스토니아" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Russian\" layout)" msgstr "그루지아(러시아어)" #: ../../keyboard.pm_.c:202 msgid "Georgian (\"Latin\" layout)" msgstr "그루지아 (라틴)" #: ../../keyboard.pm_.c:203 msgid "Greek" msgstr "그리스" #: ../../keyboard.pm_.c:204 msgid "Gujarati" msgstr "" #: ../../keyboard.pm_.c:205 msgid "Gurmukhi" msgstr "" #: ../../keyboard.pm_.c:206 msgid "Hungarian" msgstr "헝가리" #: ../../keyboard.pm_.c:207 msgid "Croatian" msgstr "크로아티아" #: ../../keyboard.pm_.c:208 msgid "Israeli" msgstr "이스라엘" #: ../../keyboard.pm_.c:209 msgid "Israeli (Phonetic)" msgstr "이스라엘 (음성학)" #: ../../keyboard.pm_.c:210 msgid "Iranian" msgstr "이란" #: ../../keyboard.pm_.c:211 msgid "Icelandic" msgstr "아이슬랜드" #: ../../keyboard.pm_.c:212 msgid "Italian" msgstr "이탈리아" #: ../../keyboard.pm_.c:213 msgid "Inuktitut" msgstr "" #: ../../keyboard.pm_.c:214 msgid "Japanese 106 keys" msgstr "일본 106키" #: ../../keyboard.pm_.c:217 msgid "Korean keyboard" msgstr "한글 키보드" #: ../../keyboard.pm_.c:218 msgid "Latin American" msgstr "라틴 아메리카" #: ../../keyboard.pm_.c:219 #, fuzzy msgid "Laotian" msgstr "라트바아" #: ../../keyboard.pm_.c:220 msgid "Lithuanian AZERTY (old)" msgstr "리투아니아 AZERTY (구형)" #: ../../keyboard.pm_.c:222 msgid "Lithuanian AZERTY (new)" msgstr "리투아니아 AZERTY (신형)" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"number row\" QWERTY" msgstr "리투아니아 (숫자열 QWERTY)" #: ../../keyboard.pm_.c:224 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "리투아니아 (음성학 QWERTY)" #: ../../keyboard.pm_.c:225 msgid "Latvian" msgstr "라트바아" #: ../../keyboard.pm_.c:226 msgid "Malayalam" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Macedonian" msgstr "마케도니아" #: ../../keyboard.pm_.c:228 msgid "Myanmar (Burmese)" msgstr "" #: ../../keyboard.pm_.c:229 #, fuzzy msgid "Mongolian (cyrillic)" msgstr "세르비아 (시릴)" #: ../../keyboard.pm_.c:230 msgid "Maltese (UK)" msgstr "" #: ../../keyboard.pm_.c:231 msgid "Maltese (US)" msgstr "" #: ../../keyboard.pm_.c:232 msgid "Dutch" msgstr "네델란드" #: ../../keyboard.pm_.c:234 msgid "Polish (qwerty layout)" msgstr "폴란드 (QwertY)" #: ../../keyboard.pm_.c:235 msgid "Polish (qwertz layout)" msgstr "폴란드 (QwertZ)" #: ../../keyboard.pm_.c:236 msgid "Portuguese" msgstr "포루투칼" #: ../../keyboard.pm_.c:237 msgid "Canadian (Quebec)" msgstr "캐나다 (퀘벡)" #: ../../keyboard.pm_.c:239 msgid "Romanian (qwertz)" msgstr "로만 (QWERTZ)" #: ../../keyboard.pm_.c:240 msgid "Romanian (qwerty)" msgstr "로만 (QWERTY)" #: ../../keyboard.pm_.c:242 msgid "Russian (Yawerty)" msgstr "러시아 (Yawerty)" #: ../../keyboard.pm_.c:244 msgid "Slovenian" msgstr "슬로베니아" #: ../../keyboard.pm_.c:245 msgid "Slovakian (QWERTZ)" msgstr "슬로바키아 (QWERTZ)" #: ../../keyboard.pm_.c:246 msgid "Slovakian (QWERTY)" msgstr "슬로바키아 (QWERTY)" #: ../../keyboard.pm_.c:248 msgid "Serbian (cyrillic)" msgstr "세르비아 (시릴)" #: ../../keyboard.pm_.c:250 msgid "Tamil (Unicode)" msgstr "" #: ../../keyboard.pm_.c:251 msgid "Tamil (TSCII)" msgstr "" #: ../../keyboard.pm_.c:252 msgid "Thai keyboard" msgstr "태국" #: ../../keyboard.pm_.c:254 msgid "Tajik keyboard" msgstr "타지크 키보드" #: ../../keyboard.pm_.c:255 msgid "Turkish (traditional \"F\" model)" msgstr "터기 (전통 「F」모델" #: ../../keyboard.pm_.c:256 msgid "Turkish (modern \"Q\" model)" msgstr "터키 (현대 「Q」모델" #: ../../keyboard.pm_.c:258 msgid "Ukrainian" msgstr "우크라이나" #: ../../keyboard.pm_.c:261 msgid "US keyboard (international)" msgstr "US 키보드 (국제)" #: ../../keyboard.pm_.c:262 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "베트남 (숫자열 QWERTY)" #: ../../keyboard.pm_.c:263 msgid "Yugoslavian (latin)" msgstr "유고슬라비아 (라틴)" #: ../../keyboard.pm_.c:270 msgid "Right Alt key" msgstr "" #: ../../keyboard.pm_.c:271 msgid "Both Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:272 msgid "Control and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:273 msgid "CapsLock key" msgstr "" #: ../../keyboard.pm_.c:274 msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:275 msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../keyboard.pm_.c:276 msgid "\"Menu\" key" msgstr "" #: ../../keyboard.pm_.c:277 msgid "Left \"Windows\" key" msgstr "" #: ../../keyboard.pm_.c:278 msgid "Right \"Windows\" key" msgstr "" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "순환 마운트 %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "논리 볼륨을 먼저 제거해 주세요.\n" #: ../../modules.pm_.c:290 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../modules/interactive.pm_.c:16 msgid "You can configure each parameter of the module here." msgstr "" #: ../../modules/parameters.pm_.c:18 #, fuzzy msgid "modinfo is not available" msgstr "플로피 드라이브를 사용할 수 없습니다." #: ../../modules/parameters.pm_.c:50 msgid "a number" msgstr "번호" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../modules/parameters.pm_.c:54 msgid "comma separated numbers" msgstr "" #: ../../modules/parameters.pm_.c:54 msgid "comma separated strings" msgstr "쉼표 분리 문자열들" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - 마우스" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "로지텍 마우스맨/퍼스트마우스 (시리얼)" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "일반적인 PS2 휠 마우스" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "ALPS 글라이드포인트" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "켄싱턴 씽킹 마우스" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "지니어스 넷마우스" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "지니어스 넷스크롤" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 msgid "Microsoft Explorer" msgstr "마이크로소프트 익스플로러" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 버튼" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "일반적인 2버튼 마우스" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "휠 마우스" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "시리얼 마우스" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "일반적인 3버튼 마우스" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "마이크로소프트 인텔리마우스" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "로지텍 마우스맨" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "마우스 시스템" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "로지텍 CC 시리즈" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "로지텍 마우스맨+/퍼스트마우스+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM 시리즈" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM 히트타블렛" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "로지텍 마우스 (시리얼, 오래된 C7 형태)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "버스마우스" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 버튼" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 버튼" #: ../../mouse.pm_.c:75 msgid "none" msgstr "없음" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "마우스 없음" #: ../../mouse.pm_.c:490 msgid "Please test the mouse" msgstr "마우스를 테스트하세요." #: ../../mouse.pm_.c:491 msgid "To activate the mouse," msgstr "마우스를 활성화하려면" #: ../../mouse.pm_.c:492 msgid "MOVE YOUR WHEEL!" msgstr "마우스휠을 움직여 보세요." #: ../../my_gtk.pm_.c:65 msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-1,-*-gulim-bold-r-normal--" "25-*-*-*-c-*-ksc5601.1987-0,*-r-*" #: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435 msgid "Finish" msgstr "종료" #: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057 #: ../../ugtk2.pm_.c:435 msgid "Next ->" msgstr "다음 ->" #: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926 msgid "Is this correct?" msgstr "이것이 맞습니까?" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011 msgid "Info" msgstr "정보" #: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036 msgid "Expand Tree" msgstr "트리 확장" #: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037 msgid "Collapse Tree" msgstr "트리 접기" #: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038 msgid "Toggle between flat and group sorted" msgstr "그룹별/팩키지별 정렬 전환" #: ../../network/adsl.pm_.c:23 msgid "use pppoe" msgstr "PPPOE 사용" #: ../../network/adsl.pm_.c:24 msgid "use pptp" msgstr "PPTP 사용" #: ../../network/adsl.pm_.c:25 msgid "use dhcp" msgstr "DHCP 사용" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "알카텔 스피드터치 USB" #: ../../network/adsl.pm_.c:27 msgid "Sagem (using pppoe) usb" msgstr "" #: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "인터넷에 연결" #: ../../network/adsl.pm_.c:30 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "ADSL 연결은 대개 PPPOE를 사용합니다. \n" "하지만, 어떤 경우에는 PPTP나, 극히 드물게는 DHCP도 사용됩니다.\n" "잘 모르겠다면, 「PPPOE 사용」을 선택하세요." #: ../../network/adsl.pm_.c:166 msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/drakfirewall.pm_.c:12 msgid "Web Server" msgstr "웹 서버" #: ../../network/drakfirewall.pm_.c:17 msgid "Domain Name Server" msgstr "도메인 네임 서버" #: ../../network/drakfirewall.pm_.c:32 msgid "Mail Server" msgstr "메일 서버" #: ../../network/drakfirewall.pm_.c:37 msgid "POP and IMAP Server" msgstr "POP and IMAP 서버" #: ../../network/drakfirewall.pm_.c:111 msgid "No network card" msgstr "네트웍 카드 없음" #: ../../network/drakfirewall.pm_.c:129 msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "드레이크 방화벽 관리자\n" "\n" "이것은 맨드레이크 리눅스 시스템의 개인 방화벽을 설정합니다.\n" "강력한 전문 방화벽을 사용하고 싶다면, 맨드레이크 보안 방화벽\n" "배포판을 구하시기 바랍니다." #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "" #: ../../network/drakfirewall.pm_.c:169 msgid "Other ports" msgstr "기타 포트" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client" msgstr "" "어떤 dhcp 클라이언트를 사용하겠습니까?\n" "dhcp-client가 기본값입니다." #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "어떠한 네트웍 어댑터도 감지되지 않았습니다.\n" "연결 설정을 할 수 없습니다." #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234 msgid "Choose the network interface" msgstr "네트웍 인터페이스를 선택하세요." #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "어떤 어댑터로 인터넷에 연결할 것인지 선택하세요." #: ../../network/ethernet.pm_.c:176 msgid "no network card found" msgstr "네트웍 카드를 찾을수 없습니다" #: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349 msgid "Configuring network" msgstr "네트웍 설정" #: ../../network/ethernet.pm_.c:201 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "호스트명을 알고 있다면 입력하세요.\n" "일부 DHCP 서버는 호스트명을 요구할 수 있습니다.\n" "호스트명은 완벽한 정규형이어야 합니다.\n" "예)「mybox.mylab.myco.com」" #: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354 msgid "Host name" msgstr "호스트명:" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103 #: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171 #: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245 #: ../../network/netconnect.pm_.c:253 msgid "Network Configuration Wizard" msgstr "네트웍 설정 마법사" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "외장 ISDN 모뎀" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "내장 ISDN 카드" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "어떤 종류의 ISDN 연결을 사용합니까?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "어떤 ISDN 설정 방식을 선호하십니까?\n" "\n" "* 기존의 설정은 ISDN4NET을 사용합니다. 강력하지만 초보자에겐\n" " 어렵고 또한 표준이 아닙니다.\n" "\n" "* 새로운 설정은 쉽고 보다 표준적이지만, 강력한 도구는 디소\n" " 부족합니다.\n" "\n" "「ISDN-LIGHT」를 추천합니다.\n" "\n" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "새로운 설정 (ISDN-LIGHT)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "기존의 설정 (ISDN4NET)" #: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184 #: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202 #: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219 msgid "ISDN Configuration" msgstr "ISDN 설정" #: ../../network/isdn.pm_.c:166 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "공급자를 선택하세요.\n" "목록에 없으면, 「목록에 없음」을 선택하세요." #: ../../network/isdn.pm_.c:179 msgid "Europe protocol" msgstr "유럽 프로토콜" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol (EDSS1)" msgstr "유럽 프로토콜 (EDSS1)" #: ../../network/isdn.pm_.c:181 msgid "Protocol for the rest of the world" msgstr "다른 지역을 위한 프로토콜" #: ../../network/isdn.pm_.c:181 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "다른 지역을 위한 프로토콜\n" " D채널 (leased lines) 아님" #: ../../network/isdn.pm_.c:185 msgid "Which protocol do you want to use?" msgstr "어떤 프로토콜을 사용하시겠습니까?" #: ../../network/isdn.pm_.c:196 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm_.c:203 msgid "What kind of card do you have?" msgstr "어떤 종유의 카드를 가지고 있습니까?" #: ../../network/isdn.pm_.c:204 msgid "I don't know" msgstr "모르겠음" #: ../../network/isdn.pm_.c:204 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:204 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:210 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "만약 ISA 카드를 가지고 있다면, 다음 화면에서 설정값이 정확해야 합니다.\n" "\n" "만약 PCMCIA 카드를 가지고 있다면, IRQ와 IO 값을 알고 있어야 합니다.\n" #: ../../network/isdn.pm_.c:214 msgid "Abort" msgstr "중지" #: ../../network/isdn.pm_.c:214 msgid "Continue" msgstr "계속" #: ../../network/isdn.pm_.c:220 msgid "Which is your ISDN card?" msgstr "어느 것이 님의 ISDN 카드입니까?" #: ../../network/isdn.pm_.c:239 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "ISDN PCI 카드가 감지되었지만, 그 유형을 알 수 없습니다. 다음 화면에서 PCI 카" "드를 선택해 주세요." #: ../../network/isdn.pm_.c:248 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "ISDN PCI 카드 검색 실패. 다음 화면에서 직접 선택해 주세요." #: ../../network/modem.pm_.c:57 msgid "Please choose which serial port your modem is connected to." msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../network/modem.pm_.c:67 msgid "Dialup options" msgstr "다이얼업 옵션" #: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619 msgid "Connection name" msgstr "연결 이름" #: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620 msgid "Phone number" msgstr "전화 번호" #: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621 msgid "Login ID" msgstr "로그인 ID" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Script-based" msgstr "스크립트 기반" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Terminal-based" msgstr "터미날 기반" #: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624 msgid "Domain name" msgstr "도메인 이름" #: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625 msgid "First DNS Server (optional)" msgstr "첫번째 DNS 서버 (옵션)" #: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626 msgid "Second DNS Server (optional)" msgstr "두번째 DNS 서버 (옵션)" #: ../../network/modem.pm_.c:95 msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm_.c:97 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Do nothing" msgstr "제외할 문자열" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Install rpm" msgstr "설치" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Title" msgstr "테이블" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "연결을 해제하거나 다시 설정할 수 있습니다." #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "연결을 다시 설정할 수 있습니다." #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "현재 인터넷에 연결되어 있습니다." #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "인터넷에 연결하거나 연결을 재설정할 수 있습니다." #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "현재 인터넷에 연결되어 있지 않습니다." #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "연결" #: ../../network/netconnect.pm_.c:37 msgid "Disconnect" msgstr "연결 끊기" #: ../../network/netconnect.pm_.c:38 msgid "Configure the connection" msgstr "연결 설정" #: ../../network/netconnect.pm_.c:41 msgid "Internet connection & configuration" msgstr "인터넷 연결 & 설정" #: ../../network/netconnect.pm_.c:94 #, c-format msgid "We are now going to configure the %s connection." msgstr "이제 「%s」연결을 설정할 것입니다." #: ../../network/netconnect.pm_.c:103 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "이제 「%s」연결을 설정할 것입니다.\n" "\n" "\n" "시작하려면 「확인」을 누르세요." #: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272 #: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77 msgid "Network Configuration" msgstr "네트웍 환경 설정" #: ../../network/netconnect.pm_.c:133 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "지금 네트웍을 사용하여 설치하고 있는 중이므로, 네트웍 설정은 이미 되어 있습니" "다.\n" "「확인」을 눌러 현재 설정을 유지하거나, 「취소」를 눌러 인터넷/네트웍 연결을 " "다시 설정하세요.\n" #: ../../network/netconnect.pm_.c:157 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "네트웍 설정 마법사에 잘 오셨습니다.\n" "\n" "지금 인터넷/네트웍 연결을 설정하려 합니다.\n" "자동 검색을 사용하고 싶지 않다면, 체크박스를 해제하세요.\n" #: ../../network/netconnect.pm_.c:163 msgid "Choose the profile to configure" msgstr "설정할 프로파일을 선택하세요." #: ../../network/netconnect.pm_.c:164 msgid "Use auto detection" msgstr "자동검색 사용" #: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966 #: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274 #: ../../standalone/drakfloppy_.c:118 msgid "Expert Mode" msgstr "전문가 모드" #: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364 msgid "Detecting devices..." msgstr "장치를 검색하고 있습니다..." #: ../../network/netconnect.pm_.c:214 msgid "Normal modem connection" msgstr "일반 모뎀 연결" #: ../../network/netconnect.pm_.c:214 #, c-format msgid "detected on port %s" msgstr "%s 포트에서 발견" #: ../../network/netconnect.pm_.c:215 #, fuzzy msgid "Winmodem connection" msgstr "일반 모뎀 연결" #: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217 #, fuzzy msgid "detected" msgstr "%s 발견" #: ../../network/netconnect.pm_.c:216 msgid "ISDN connection" msgstr "ISDN 연결" #: ../../network/netconnect.pm_.c:216 #, c-format msgid "detected %s" msgstr "%s 발견" #: ../../network/netconnect.pm_.c:217 msgid "ADSL connection" msgstr "ADSL 연결" #: ../../network/netconnect.pm_.c:218 msgid "Cable connection" msgstr "캐이블 연결" #: ../../network/netconnect.pm_.c:218 msgid "cable connection detected" msgstr "캐이블 연결 발견" #: ../../network/netconnect.pm_.c:219 msgid "LAN connection" msgstr "LAN 연결" #: ../../network/netconnect.pm_.c:219 msgid "ethernet card(s) detected" msgstr "이더넷 카드 발견" #: ../../network/netconnect.pm_.c:222 msgid "Choose the connection you want to configure" msgstr "설정할 연결을 선택하세요." #: ../../network/netconnect.pm_.c:246 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "인터넷 접속방식을 여러개 설정했습니다.\n" "연결에 사용할 방식을 선택하세요.\n" "\n" #: ../../network/netconnect.pm_.c:247 msgid "Internet connection" msgstr "인터넷 연결" #: ../../network/netconnect.pm_.c:253 msgid "Do you want to start the connection at boot?" msgstr "부팅시에 연결하도록 하겠습니까?" #: ../../network/netconnect.pm_.c:267 msgid "Network configuration" msgstr "네트웍 설정" #: ../../network/netconnect.pm_.c:268 msgid "The network needs to be restarted" msgstr "네트웍을 다시 시작해야 합니다." #: ../../network/netconnect.pm_.c:272 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "네트웍을 다시 시작하는 도중에 문제가 발생했습니다:\n" "\n" "%s" #: ../../network/netconnect.pm_.c:282 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "축하합니다. 네트웍/인터넷 설정이 완료되었습니다.\n" "\n" "이제 설정이 시스템에 적용될 것입니다.\n" #: ../../network/netconnect.pm_.c:286 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "완료된 후에, X를 다시 시작하여 호스트명 변경에 따른\n" "문제 발생을 피하시기 바랍니다." #: ../../network/netconnect.pm_.c:287 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../network/network.pm_.c:278 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "경고: 이 장치는 이미 인터넷 연결용으로 설정되어 있습니다.\n" "그냥 현재 설정을 유지하세요.\n" "아래 입력란을 변경하면 현재 설정을 덮어쓰게 됩니다." #: ../../network/network.pm_.c:283 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "이 시스템을 위한 IP 설정을 입력해 주세요.\n" "각각의 항목은「.」으로 구분된 십진수 IP 주소로 입력해야 합니다.\n" "(예, 1.2.3.4)" #: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294 #, c-format msgid "Configuring network device %s" msgstr "%s 네트웍 카드 설정중" #: ../../network/network.pm_.c:294 #, c-format msgid " (driver %s)" msgstr " (%s 드라이버)" #: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228 #: ../../standalone/drakconnect_.c:464 msgid "IP address" msgstr "IP 주소" #: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465 #: ../../standalone/drakgw_.c:291 msgid "Netmask" msgstr "넷마스크" #: ../../network/network.pm_.c:298 msgid "(bootp/dhcp)" msgstr "(BOOTP/DHCP)" #: ../../network/network.pm_.c:298 msgid "Automatic IP" msgstr "IP 자동할당" #: ../../network/network.pm_.c:299 msgid "Start at boot" msgstr "부팅시 시작" #: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812 msgid "IP address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../network/network.pm_.c:326 msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0'." msgstr "" #: ../../network/network.pm_.c:330 msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0'." msgstr "" #: ../../network/network.pm_.c:350 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "호스트 이름을 입력해 주세요.\n" "호스트 이름은 ``mybox.mylab.myco.com''과 같이 완전한 호스트 \n" "이름이어야 합니다. \n" "게이트 웨이가 있다면 그 IP 주소도 입력해야 합니다." #: ../../network/network.pm_.c:355 msgid "DNS server" msgstr "DNS 서버" #: ../../network/network.pm_.c:356 #, c-format msgid "Gateway (e.g. %s)" msgstr "rpdlxmdnpdl (예. %s)" #: ../../network/network.pm_.c:358 msgid "Gateway device" msgstr "게이트웨이 장치" #: ../../network/network.pm_.c:363 #, fuzzy msgid "DNS server address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../network/network.pm_.c:367 #, fuzzy msgid "Gateway address should be in format 1.2.3.4" msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다." #: ../../network/network.pm_.c:381 msgid "Proxies configuration" msgstr "프락시 설정" #: ../../network/network.pm_.c:382 msgid "HTTP proxy" msgstr "웹 프락시" #: ../../network/network.pm_.c:383 msgid "FTP proxy" msgstr "FTP 프락시" #: ../../network/network.pm_.c:384 msgid "Track network card id (useful for laptops)" msgstr "네트웍카드 ID 추적 (랩탑에 유용함)" #: ../../network/network.pm_.c:387 msgid "Proxy should be http://..." msgstr "프락시 이름은 httP://... 이어야 합니다." #: ../../network/network.pm_.c:388 #, fuzzy msgid "Url should begin with 'ftp:' or 'http:'" msgstr "주소는 「http:」로 시작해야 합니다." #: ../../network/shorewall.pm_.c:26 msgid "Firewalling configuration detected!" msgstr "방화벽 설정이 감지되었습니다!" #: ../../network/shorewall.pm_.c:27 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "경고! 기존의 방화벽 설정이 감지되었습니다. 설치가 끝난 후에 직접 수정할 필요" "가 있습니다." #: ../../network/tools.pm_.c:57 msgid "Internet configuration" msgstr "인터넷 설정" #: ../../network/tools.pm_.c:58 msgid "Do you want to try to connect to the Internet now?" msgstr "지금 인터넷 연결을 시도해 보시겠습니까?" #: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193 msgid "Testing your connection..." msgstr "연결 테스트 중..." #: ../../network/tools.pm_.c:70 msgid "The system is now connected to Internet." msgstr "지금 시스템이 인터넷에 연결되었습니다." #: ../../network/tools.pm_.c:71 msgid "For security reason, it will be disconnected now." msgstr "보안상의 이유로 이제 연결을 끊을 것입니다." #: ../../network/tools.pm_.c:72 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "시스템이 인터넷에 연결되지 않은 듯합니다.\n" "연결 설정을 다시해 보세요." #: ../../network/tools.pm_.c:96 msgid "Connection Configuration" msgstr "연결 설정" #: ../../network/tools.pm_.c:97 msgid "Please fill or check the field below" msgstr "아래 양식을 채워 주세요." #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605 msgid "Card IRQ" msgstr "카드 IRQ" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606 msgid "Card mem (DMA)" msgstr "카드 메모리 (DMA)" #: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607 msgid "Card IO" msgstr "카드 IO" #: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608 msgid "Card IO_0" msgstr "카드 IO_0" #: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609 msgid "Card IO_1" msgstr "카드 IO_1" #: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610 msgid "Your personal phone number" msgstr "님의 개인 전화 번호" #: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611 msgid "Provider name (ex provider.net)" msgstr "공급자 이름 (예 provider.net)" #: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612 msgid "Provider phone number" msgstr "공급자 전화번호" #: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613 msgid "Provider dns 1 (optional)" msgstr "공급자 DNS 1 (옵션)" #: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614 msgid "Provider dns 2 (optional)" msgstr "공급자 DNS 2 (옵션)" #: ../../network/tools.pm_.c:109 msgid "Choose your country" msgstr "국가 선택" #: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617 msgid "Dialing mode" msgstr "다이얼링 모드" #: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629 msgid "Connection speed" msgstr "연결 속도" #: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630 msgid "Connection timeout (in sec)" msgstr "연결 시간초과 (초)" #: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615 msgid "Account Login (user name)" msgstr "로그인 계정(사용자명)" #: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616 #: ../../standalone/drakconnect_.c:647 msgid "Account Password" msgstr "계정 암호" #: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132 msgid "United Kingdom" msgstr "영국" #: ../../partition_table.pm_.c:603 msgid "mount failed: " msgstr "마운트 실패: " #: ../../partition_table.pm_.c:667 msgid "Extended partition not supported on this platform" msgstr "이 시스템에서는 확장파티션이 지원되지 않습니다." #: ../../partition_table.pm_.c:685 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "파티션 테이블에서 빈 공간이 있지만 사용할 수 없습니다.\n" "유일한 해결책은 주 파티션들이 확장 파티션들의 뒤에 있는 빈 공간을 차지하도록 " "옴기는 것입니다." #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s 파일로부터의 복구 실패: %s" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "잘못된 백업 파일" #: ../../partition_table.pm_.c:796 #, c-format msgid "Error writing to file %s" msgstr "%s 파일에 쓰기 오류" #: ../../partition_table/raw.pm_.c:192 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "하드드스크에 이상이 발생했습니다. \n" "데이터 무결성 검사가 실패했습니다. \n" "이것은 디스크에 기록되는 데이터를 잃어 버린다는 것을 의미합니다." #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "필수 팩키지" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "중요한 팩키지" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "훌륭한 팩키지" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "좋은 팩키지" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "괜찮은 팩키지" #: ../../printer/data.pm_.c:18 msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../printer/data.pm_.c:19 msgid "PDQ" msgstr "PDQ" #: ../../printer/data.pm_.c:30 msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../printer/data.pm_.c:31 msgid "LPD" msgstr "LPD" #: ../../printer/data.pm_.c:51 msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../printer/data.pm_.c:52 msgid "LPRng" msgstr "LPRng" #: ../../printer/data.pm_.c:75 msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677 msgid "CUPS" msgstr "CUPS" #: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213 #: ../../printer/detect.pm_.c:250 msgid "Unknown Model" msgstr "알 수 없는 모델" #: ../../printer/main.pm_.c:26 msgid "Local printer" msgstr "로컬 프린터" #: ../../printer/main.pm_.c:27 msgid "Remote printer" msgstr "원격 프린터" #: ../../printer/main.pm_.c:28 msgid "Printer on remote CUPS server" msgstr "원격 CUPS 서버의 프린터" #: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835 msgid "Printer on remote lpd server" msgstr "원격 LPD 서버의 프린터" #: ../../printer/main.pm_.c:30 msgid "Network printer (TCP/Socket)" msgstr "네트웍 프린터 (TCP/소켓)" #: ../../printer/main.pm_.c:31 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../printer/main.pm_.c:32 msgid "Printer on NetWare server" msgstr "네트웨어 서버상의 프린터" #: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839 msgid "Enter a printer device URI" msgstr "프린터 장치 URI을 입력하세요." #: ../../printer/main.pm_.c:34 msgid "Pipe job into a command" msgstr "작업을 명령으로 파이프 연결" #: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478 #: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228 msgid "Unknown model" msgstr "알 수없는 모델" #: ../../printer/main.pm_.c:317 msgid "Local Printers" msgstr "로컬 프린터" #: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678 msgid "Remote Printers" msgstr "원격 프린터" #: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381 #, c-format msgid " on parallel port \\/*%s" msgstr "" #: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383 #, c-format msgid ", USB printer \\/*%s" msgstr "" #: ../../printer/main.pm_.c:334 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr "" #: ../../printer/main.pm_.c:337 msgid ", multi-function device on USB" msgstr "" #: ../../printer/main.pm_.c:339 msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../printer/main.pm_.c:341 msgid ", multi-function device" msgstr "" #: ../../printer/main.pm_.c:344 #, c-format msgid ", printing to %s" msgstr ", %s에 인쇄" #: ../../printer/main.pm_.c:346 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm_.c:348 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../printer/main.pm_.c:352 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../printer/main.pm_.c:356 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../printer/main.pm_.c:358 #, c-format msgid ", using command %s" msgstr "" #: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603 msgid "Raw printer (No driver)" msgstr "날(RAW) 프린터 (드라이버 사용안함)" #: ../../printer/main.pm_.c:647 #, c-format msgid "(on %s)" msgstr "(%s에)" #: ../../printer/main.pm_.c:649 msgid "(on this machine)" msgstr "(이 서버상의)" #: ../../printer/main.pm_.c:674 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS 서버 IP" #: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888 #: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120 #: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197 #: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354 msgid " (Default)" msgstr " (기본값)" #: ../../printer/printerdrake.pm_.c:27 msgid "Select Printer Connection" msgstr "프린터 연결방법을 선택하세요." #: ../../printer/printerdrake.pm_.c:28 msgid "How is the printer connected?" msgstr "프린터가 어떻게 연결되어 있습니까?" #: ../../printer/printerdrake.pm_.c:30 #, fuzzy msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "\n" "원격 CUPS 서버의 프린터는 여기서 설정할 필요가 \n" "없습니다; 이런 프린터는 자동으로 감지되어 집니다. 이와 같은 경우\n" "「원격 CUPS 서버의 프린터」를 선택하세요." #: ../../printer/printerdrake.pm_.c:38 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950 msgid "CUPS configuration" msgstr "CUPS 설정" #: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951 msgid "Specify CUPS server" msgstr "CUPS 서버 지정" #: ../../printer/printerdrake.pm_.c:83 #, fuzzy msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" "원격 CUPS 서버에 대해서는 여기서 프린터를 설정할 필요가\n" "없습니다; CUPS 서버는 자동으로 프린터 정보를 알려줍니다.\n" "현재 알려진 모든 프린터는 「기본 프린터」영역에 나열됩니다.\n" "기본 프린터로 사용할 프린터를 선택하고 「적용/프린터 다시 읽기」\n" "버튼을 누르세요. 프린터 목록을 갱신하려 할때도 동일한 버튼을\n" "누르세요. (CUPS가 시작된 후, 모든 원격 프린터가 보여지기까지는\n" "30초 가량의 시간이 걸립니다.)\n" "CUPS 서버가 다른 네트웍에 있다면, CUPS 서버의 IP 주소와\n" "포트 번호(옵션)를 지정해야만 서버로부터 프린터 정보를 받아올 수\n" "있습니다. 이런 경우가 아니라면 이 영역들은 그냥 비워두세요." #: ../../printer/printerdrake.pm_.c:84 #, fuzzy msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" "\n" "일반적으로 CUPS는 네트웍환경에 따라 자동으로 설정되기\n" "때문에, 지역 네트웍에 있는 CUPS 서버의 프린터를 사용할\n" "수 있습니다. 그러나 만약에 이것이 올바르게 작동하지 않으면,\n" "「자동 CUPS 설정」을 해제하시고, 「/etc/cups/cupsd.conf」\n" "를 직접 수정해 주세요. 나중에 CUPS를 다시 실행하는 것을\n" "잊지마세요. (명령어: 「service cups restart」 )" #: ../../printer/printerdrake.pm_.c:88 msgid "The IP address should look like 192.168.1.20" msgstr "IP 주소는 「192.168.1.20」과 같은 형식이어야 합니다." #: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041 msgid "The port number should be an integer!" msgstr "포트 번호는 정수이어야 합니다!" #: ../../printer/printerdrake.pm_.c:99 msgid "CUPS server IP" msgstr "CUPS 서버 IP" #: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061 #: ../../standalone/harddrake2_.c:63 msgid "Port" msgstr "포트" #: ../../printer/printerdrake.pm_.c:102 msgid "Automatic CUPS configuration" msgstr "자동 CUPS 설정" #: ../../printer/printerdrake.pm_.c:159 msgid "Checking your system..." msgstr "시스템 검사 중..." #: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226 #: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481 #: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133 #: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343 #: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436 #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630 #: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701 #: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731 #: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809 #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911 #: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281 #: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369 #: ../../standalone/printerdrake_.c:47 msgid "Printerdrake" msgstr "프린터드레이크" #: ../../printer/printerdrake.pm_.c:167 msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../printer/printerdrake.pm_.c:179 #, fuzzy msgid "" "The following printers\n" "\n" msgstr "다음 팩키지들이 제거될 것입니다." #: ../../printer/printerdrake.pm_.c:180 #, fuzzy msgid "" "The following printer\n" "\n" msgstr "다음 팩키지들이 제거될 것입니다." #: ../../printer/printerdrake.pm_.c:182 msgid "" "\n" "and one unknown printer are " msgstr "" #: ../../printer/printerdrake.pm_.c:184 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "are " msgstr "" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "is " msgstr "" #: ../../printer/printerdrake.pm_.c:189 #, fuzzy msgid "directly connected to your system" msgstr "시스템 폰트 복사" #: ../../printer/printerdrake.pm_.c:192 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm_.c:194 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm_.c:200 #, fuzzy msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "프린터가 연결된 포트를 선택하세요." #: ../../printer/printerdrake.pm_.c:214 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm_.c:215 #, fuzzy msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "이 프린터(%s)를\n" "기본 프린터로 하시겠습니까?" #: ../../printer/printerdrake.pm_.c:217 #, fuzzy msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "부팅시에 연결하도록 하겠습니까?" #: ../../printer/printerdrake.pm_.c:218 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../printer/printerdrake.pm_.c:219 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270 #: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933 #: ../../printer/printerdrake.pm_.c:3060 msgid "Add a new printer" msgstr "새 프린터 추가" #: ../../printer/printerdrake.pm_.c:259 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm_.c:272 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:289 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" #: ../../printer/printerdrake.pm_.c:307 #, fuzzy msgid "Auto-detect printers connected to this machine" msgstr "프린터 자동검색" #: ../../printer/printerdrake.pm_.c:310 msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../printer/printerdrake.pm_.c:313 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../printer/printerdrake.pm_.c:329 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538 #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Printer auto-detection" msgstr "프린터 자동 검색" #: ../../printer/printerdrake.pm_.c:385 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm_.c:387 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../printer/printerdrake.pm_.c:391 #, c-format msgid "Detected %s" msgstr "%s 발견" #: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423 #: ../../printer/printerdrake.pm_.c:440 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "" #: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425 #: ../../printer/printerdrake.pm_.c:443 #, c-format msgid "USB printer \\/*%s" msgstr "" #: ../../printer/printerdrake.pm_.c:399 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "네트웍 프린터 (소켓)" #: ../../printer/printerdrake.pm_.c:401 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "삼바/윈도우즈 95/98/NT상의 프린터" #: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547 msgid "Local Printer" msgstr "지역 프린터" #: ../../printer/printerdrake.pm_.c:526 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm_.c:530 msgid "You must enter a device or file name!" msgstr "장치 또는 파일 이름을 입력해야 합니다!" #: ../../printer/printerdrake.pm_.c:539 msgid "No printer found!" msgstr "프린터를 찾을 수 없습니다!" #: ../../printer/printerdrake.pm_.c:548 msgid "Available printers" msgstr "유효한 프린터들" #: ../../printer/printerdrake.pm_.c:552 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm_.c:553 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm_.c:555 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" #: ../../printer/printerdrake.pm_.c:556 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../printer/printerdrake.pm_.c:558 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../printer/printerdrake.pm_.c:559 msgid "Please choose the port where your printer is connected to." msgstr "프린터가 연결된 포트를 선택하세요." #: ../../printer/printerdrake.pm_.c:561 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../printer/printerdrake.pm_.c:565 msgid "You must choose/enter a printer/device!" msgstr "프린터 또는 장치를 입력 또는 선택해야 합니다!" #: ../../printer/printerdrake.pm_.c:584 msgid "Manual configuration" msgstr "수동 설정" #: ../../printer/printerdrake.pm_.c:633 msgid "Remote lpd Printer Options" msgstr "원격 LPD 프린터 옵션" #: ../../printer/printerdrake.pm_.c:634 #, fuzzy msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "원격 LPD 프린터를 사용하기 위해서는\n" "그 프린터 서버의 호스트명과 그 서버상의 프린터 이름을\n" "입력해야 합니다." #: ../../printer/printerdrake.pm_.c:635 msgid "Remote host name" msgstr "원격 호스트명" #: ../../printer/printerdrake.pm_.c:636 msgid "Remote printer name" msgstr "원격 프린터명" #: ../../printer/printerdrake.pm_.c:639 msgid "Remote host name missing!" msgstr "원격 호스트명을 찾을 수 없음!" #: ../../printer/printerdrake.pm_.c:643 msgid "Remote printer name missing!" msgstr "원격 프린터명이 빠졌습니다!!" #: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170 #, c-format msgid "Detected model: %s %s" msgstr "검색된 모델: %s %s" #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Scanning network..." msgstr "네트웍 검색 중 ..." #: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../printer/printerdrake.pm_.c:795 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) 프린터 옵션" #: ../../printer/printerdrake.pm_.c:796 #, fuzzy msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "삼바 프린터로 인쇄하려면, 삼바 서버의 호스트명 \n" "(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과, \n" "가능하다면, 그 서버의 IP 주소 그리고 액세스하려는 프린터의 \n" "공유 이름, 정식 사용자명, 암호, 작업그룹명을 \n" "입력해야 합니다." #: ../../printer/printerdrake.pm_.c:797 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../printer/printerdrake.pm_.c:799 msgid "SMB server host" msgstr "SMB 서버 호스트" #: ../../printer/printerdrake.pm_.c:800 msgid "SMB server IP" msgstr "SMB 서버 IP" #: ../../printer/printerdrake.pm_.c:801 msgid "Share name" msgstr "공유 이름" #: ../../printer/printerdrake.pm_.c:804 msgid "Workgroup" msgstr "작업 그룹" #: ../../printer/printerdrake.pm_.c:806 msgid "Auto-detected" msgstr "자동 검색됨" #: ../../printer/printerdrake.pm_.c:816 msgid "Either the server name or the server's IP must be given!" msgstr "서버 이름 또는 서버 IP를 입력해야 합니다!" #: ../../printer/printerdrake.pm_.c:820 msgid "Samba share name missing!" msgstr "삼바 공유 이름을 찾을 수 없음!" #: ../../printer/printerdrake.pm_.c:826 msgid "SECURITY WARNING!" msgstr "" #: ../../printer/printerdrake.pm_.c:827 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:837 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:840 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../printer/printerdrake.pm_.c:911 msgid "NetWare Printer Options" msgstr "넷웨어 프린터 옵션" #: ../../printer/printerdrake.pm_.c:912 #, fuzzy msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "넷웨어 프린터로 인쇄하려면, 넷웨어 서버의 호스트명 \n" "(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과 \n" "액세스하려는 프린터의 큐 이름, 정식 사용자명, 암호를 \n" "입력해야 합니다." #: ../../printer/printerdrake.pm_.c:913 msgid "Printer Server" msgstr "프린터 서버" #: ../../printer/printerdrake.pm_.c:914 msgid "Print Queue Name" msgstr "프린트 큐 이름" #: ../../printer/printerdrake.pm_.c:919 msgid "NCP server name missing!" msgstr "NCP 서버 이름을 찾을 수 없음!" #: ../../printer/printerdrake.pm_.c:923 msgid "NCP queue name missing!" msgstr "NCP 큐 이름을 찾을 수 없음!" #: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../printer/printerdrake.pm_.c:1030 msgid "TCP/Socket Printer Options" msgstr "TCP/소켓 프린터 옵션" #: ../../printer/printerdrake.pm_.c:1032 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" #: ../../printer/printerdrake.pm_.c:1033 #, fuzzy msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "소켓 프린터로 인쇄하기 위해서는, 프린터의 호스트명과 \n" "포트 번호(옵션)를 지정해야 합니다. HP JetDirect 서버상에서는\n" "일반적으로 9100 포트를 사용하지만, 다른 서버상에서는 각기\n" "다를 수 있습니다. 하드웨어 설명서를 참조하세요." #: ../../printer/printerdrake.pm_.c:1037 msgid "Printer host name or IP missing!" msgstr "프린터 호스트명 또는 IP가 지정되지 않았습니다!" #: ../../printer/printerdrake.pm_.c:1059 msgid "Printer host name or IP" msgstr "프린터 호스트명 또는 IP" #: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109 msgid "Printer Device URI" msgstr "프린터 장치 URI" #: ../../printer/printerdrake.pm_.c:1108 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "프린터 액세스 주소를 직접 지정할 수 있습니다. 주소는 CUPS 또는 Foomatic 규정" "을 준수해야 합니다. 그렇지 않은 주소는 모든 스풀러가 지원하지 않습니다." #: ../../printer/printerdrake.pm_.c:1123 msgid "A valid URI must be entered!" msgstr "유효한 주소를 입력하세요!" #: ../../printer/printerdrake.pm_.c:1463 #, fuzzy msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "모든 프린터는 이름이 있어야 합니다.(예, lp)\n" "설명과 위치 부분을 입력할 필요는 없습니다.\n" "그것들은 단지 사용자들을 위한 부연설명일 뿐입니다." #: ../../printer/printerdrake.pm_.c:1464 msgid "Name of printer" msgstr "프린터 이름" #: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38 msgid "Description" msgstr "설명" #: ../../printer/printerdrake.pm_.c:1466 msgid "Location" msgstr "위치" #: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599 msgid "Reading printer database..." msgstr "프린터 데이터베이스 읽는 중 ..." #: ../../printer/printerdrake.pm_.c:1482 msgid "Preparing printer database..." msgstr "프린터 데이터베이스 준비 중 ..." #: ../../printer/printerdrake.pm_.c:1578 msgid "Your printer model" msgstr "프린터 모델" #: ../../printer/printerdrake.pm_.c:1579 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587 msgid "The model is correct" msgstr "모델이 정확합니다." #: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586 #: ../../printer/printerdrake.pm_.c:1589 msgid "Select model manually" msgstr "직접 모델 선택" #: ../../printer/printerdrake.pm_.c:1606 msgid "Printer model selection" msgstr "프린터 모델 선택" #: ../../printer/printerdrake.pm_.c:1607 msgid "Which printer model do you have?" msgstr "어떤 프린터를 가지고 있습니까?" #: ../../printer/printerdrake.pm_.c:1608 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" #: ../../printer/printerdrake.pm_.c:1611 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../printer/printerdrake.pm_.c:1697 msgid "OKI winprinter configuration" msgstr "OKI 윈프린터 설정" #: ../../printer/printerdrake.pm_.c:1698 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745 msgid "Lexmark inkjet configuration" msgstr "렉스마크 잉크젯 설정" #: ../../printer/printerdrake.pm_.c:1719 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm_.c:1746 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../printer/printerdrake.pm_.c:1749 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "" #: ../../printer/printerdrake.pm_.c:1750 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:1972 #, fuzzy msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "프린터 기본값 설정\n" "페이지 크기와 (만약 유효하다면) 잉크 유형이 올바른지\n" "잘 확인하세요. 고품질 인쇄물을 얻기위해서는 인쇄 속도가\n" "그 만큼 느려진다는 것을 알고 계세요." #: ../../printer/printerdrake.pm_.c:1981 #, c-format msgid "Option %s must be an integer number!" msgstr "%s 옵션은 정수 번호이어야 합니다!" #: ../../printer/printerdrake.pm_.c:1985 #, c-format msgid "Option %s must be a number!" msgstr "%s 옵션은 숫자이어야 합니다!" #: ../../printer/printerdrake.pm_.c:1989 #, c-format msgid "Option %s out of range!" msgstr "%s 옵션 범위 초과!" #: ../../printer/printerdrake.pm_.c:2028 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "이 프린터(%s)를\n" "기본 프린터로 하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2051 msgid "Test pages" msgstr "시험 페이지" #: ../../printer/printerdrake.pm_.c:2052 #, fuzzy msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "인쇄할 시험 페이지를 선택하세요.\n" "주의: 사진 시험 페이지를 인쇄하기 위해서는 다소 시간이 걸릴 수 있습니다.\n" "그리고 저용량의 메모리를 가진 레이저 프린터에서는\n" "페이지가 나오지 않을 수도 있습니다.\n" "표준 시험 페이지는 대개 잘 인쇄됩니다." #: ../../printer/printerdrake.pm_.c:2056 msgid "No test pages" msgstr "시험 페이지 없음" #: ../../printer/printerdrake.pm_.c:2057 msgid "Print" msgstr "인쇄" #: ../../printer/printerdrake.pm_.c:2114 msgid "Standard test page" msgstr "표준 시험 페이지" #: ../../printer/printerdrake.pm_.c:2117 msgid "Alternative test page (Letter)" msgstr "다른 시험 페이지 (Letter)" #: ../../printer/printerdrake.pm_.c:2120 msgid "Alternative test page (A4)" msgstr "시험 페이지 활성화 (A4)" #: ../../printer/printerdrake.pm_.c:2122 msgid "Photo test page" msgstr "사진 시험 페이지" #: ../../printer/printerdrake.pm_.c:2126 msgid "Do not print any test page" msgstr "시험 페이지 인쇄 안함" #: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285 msgid "Printing test page(s)..." msgstr "시험 페이지 인쇄 중..." #: ../../printer/printerdrake.pm_.c:2159 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "시험 인쇄 페이지를 프린터로 보냈습니다.\n" "인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n" "인쇄 상황: \n" "%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2163 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "시험 인쇄 페이지를 프린터로 보냈습니다.\n" "인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n" #: ../../printer/printerdrake.pm_.c:2170 msgid "Did it work properly?" msgstr "올바르게 작동했습니까?" #: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229 msgid "Raw printer" msgstr "날(RAW) 프린터" #: ../../printer/printerdrake.pm_.c:2216 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2218 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238 #: ../../printer/printerdrake.pm_.c:2248 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264 #, fuzzy, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" "현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세" "요.\n" "\n" #: ../../printer/printerdrake.pm_.c:2228 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」명령을 사용하세" "요.\n" #: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245 #: ../../printer/printerdrake.pm_.c:2255 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250 #, fuzzy msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세" "요.\n" "\n" #: ../../printer/printerdrake.pm_.c:2253 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」 또는 「%s <파일>」" "명령을 사용하세요.\n" #: ../../printer/printerdrake.pm_.c:2257 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../printer/printerdrake.pm_.c:2261 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "「%s」와「%s」명령은 또한 특정 인쇄 작업을 위한 옵션 설정을 수정할 수 있게 합" "니다. 명령행에 원하는 설정값을 추가하세요, 예: 「%s <파일>」.\n" #: ../../printer/printerdrake.pm_.c:2271 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../printer/printerdrake.pm_.c:2272 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../printer/printerdrake.pm_.c:2274 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../printer/printerdrake.pm_.c:2275 #, c-format msgid "Printing on the printer \"%s\"" msgstr "프린터「%s」상에서 인쇄 중" #: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281 #: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283 #: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307 #: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156 #: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695 #: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118 msgid "Close" msgstr "닫기" #: ../../printer/printerdrake.pm_.c:2281 msgid "Print option list" msgstr "프린터 옵션 목록" #: ../../printer/printerdrake.pm_.c:2301 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../printer/printerdrake.pm_.c:2322 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702 #: ../../printer/printerdrake.pm_.c:2990 msgid "Reading printer data..." msgstr "프린터 데이터 읽는 중 ..." #: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391 #: ../../printer/printerdrake.pm_.c:2426 msgid "Transfer printer configuration" msgstr "프린터 설정 전송" #: ../../printer/printerdrake.pm_.c:2365 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "스풀러 %s를 위해 사용한 프린터 설정을 현재 스풀러인 %s로 복사할 수 있습니다. " "모든 설정 데이터(프린터명, 설명, 위치, 연결 유형, 그리고 기본 옵션값들)가 넘" "겨질 것입니다. 그러나 작업들은 전송되지 않습니다.\n" "다음과 같은 이유로인하여 모든 큐가 전송될 수는 없습니다:\n" #: ../../printer/printerdrake.pm_.c:2368 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS는 노벨 서버상의 프린터나 자유형식 명령어로 데이터를 보내는 프린터는 지원" "하지 않습니다.\n" #: ../../printer/printerdrake.pm_.c:2370 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "LPQ는 단지 지역 프린터, 원격 LPD 프린터 그리고 소켓/TCP 프린터만을 지원합니" "다.\n" #: ../../printer/printerdrake.pm_.c:2372 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD와 LPRng는 IPP 프린터를 지원하지 않습니다.\n" #: ../../printer/printerdrake.pm_.c:2374 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "그리고 또한, 이 프로그램이나 「Foomatic 설정」으로 생성되지 않은 큐는 전송될 " "수 없습니다." #: ../../printer/printerdrake.pm_.c:2375 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "또한 제조업체가 제공한 PPD 파일이나 CUPS 포함 드라이버로 설정된 프린터도 전송" "될 수 없습니다." #: ../../printer/printerdrake.pm_.c:2376 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "전송하려는 프린터들을 선택한 후에 「전송」을 누르세요." #: ../../printer/printerdrake.pm_.c:2379 msgid "Do not transfer printers" msgstr "프린터 전송 하지않음" #: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396 msgid "Transfer" msgstr "전송" #: ../../printer/printerdrake.pm_.c:2392 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "프린터 「%s」가 이미 %s하에 존재함니다.\n" "덮어 쓸려면 「전송」을 누르세요.\n" "새 이름을 입력하거나 이 프린터를 지나칠 수도 있습니다." #: ../../printer/printerdrake.pm_.c:2400 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "프린터 이름에는 문자, 숫자 그리고 밑줄(Underscore)만 있어야 합니다." #: ../../printer/printerdrake.pm_.c:2405 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "프린터 「%s」가 이미 존재합니다.\n" "정말로 기존 설정을 덮어 쓸까요?" #: ../../printer/printerdrake.pm_.c:2413 msgid "New printer name" msgstr "새 프린터 이름" #: ../../printer/printerdrake.pm_.c:2416 #, c-format msgid "Transferring %s..." msgstr "%s 전송 중 ..." #: ../../printer/printerdrake.pm_.c:2427 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "이전 기본 프린터(「%s」)를 전송하였습니다. 새 프린팅 시스템 %s하에서 그것이 " "또한 기본 프린터가 되도록 하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2437 msgid "Refreshing printer data..." msgstr "프린터 데이터 갱신 중 ..." #: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516 #: ../../printer/printerdrake.pm_.c:2528 msgid "Configuration of a remote printer" msgstr "원격 프린터 설정" #: ../../printer/printerdrake.pm_.c:2446 msgid "Starting network..." msgstr "네트웍 연결 중..." #: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483 #: ../../printer/printerdrake.pm_.c:2485 msgid "Configure the network now" msgstr "지금 네트웍 설정" #: ../../printer/printerdrake.pm_.c:2480 msgid "Network functionality not configured" msgstr "네트웍 기능이 설정되지 않았습니다." #: ../../printer/printerdrake.pm_.c:2481 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "원격 프린터를 설정하려 합니다. 그러기 위해서는 네트웍이 동작하고 있어야 하는" "데, 아직 네트웍 설정이 되어 있지 않습니다. 네트웍 설정없이 계속 진행하면, 지" "금 설정하고 있는 프린터를 사용할 수 없습니다. 어떻게 하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2484 msgid "Go on without configuring the network" msgstr "네트웍 설정 없이 계속" #: ../../printer/printerdrake.pm_.c:2518 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "설치과정에서 설정한 네트웍을 시작할 수 없습니다. 시스템이 부팅될 때, 네트웍" "이 자동 실행되도록 되어 있는지 확인하고, 맨드레이크 제어 센터(「네트웍과 인터" "넷」/「연결」)를 이용하여 올바르게 설정하세요.그리고나서 다시 맨드레이크 제" "어 센터(「하드웨어」/「프린터」)를 이용하여, 프린터 설정을 다시 해 보세요." #: ../../printer/printerdrake.pm_.c:2519 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "네트웍 접근이 불가능했으며, 시작할 수도 없었습니다. 네트웍 설정과 하드웨어를 " "점검해 주세요. 그리고나서 원격 프린터 설정을 다시 시도해 보세요." #: ../../printer/printerdrake.pm_.c:2529 msgid "Restarting printing system..." msgstr "인쇄 시스템 재실행 중 ..." #: ../../printer/printerdrake.pm_.c:2568 msgid "high" msgstr "높음" #: ../../printer/printerdrake.pm_.c:2568 msgid "paranoid" msgstr "최고" #: ../../printer/printerdrake.pm_.c:2569 #, c-format msgid "Installing a printing system in the %s security level" msgstr "보안 수준 %s로 인쇄 시스템 설치 중" #: ../../printer/printerdrake.pm_.c:2570 #, fuzzy, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "지금 님은 보안수준 %2$s로 운용되는 시스템에\n" "인쇄 시스템 %1$s을 설치하려고 합니다.\n" "\n" "인쇄 시스템은 인쇄작업을 기다렸다가 처리하는\n" "대몬(백그라운드 프로세스)를 실행시킵니다.\n" "원격 시스템에서 네트웍으로 이 대몬에 접근할 수도\n" "있기 때문에, 크래커들의 사냥감이 되기도 합니다.\n" "따라서 현재 보안 수준에서는 단지 몇몇의 매몬들만\n" "실행되도록 선택되는 것이 기본입니다.\n" "\n" "정말로 이 컴퓨터상의 인쇄 설정을\n" "원하십니까? " #: ../../printer/printerdrake.pm_.c:2604 msgid "Starting the printing system at boot time" msgstr "부팅시 인쇄 시스템 자동실행" #: ../../printer/printerdrake.pm_.c:2605 #, fuzzy, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "인쇄 시스템(%s)는 컴퓨터가 부팅할 때 자동으로 실행되지\n" "않을 것입니다.\n" "\n" "인쇄 시스템은 크래커들의 잠재적인 공격목표이기 때문에,\n" "보안 수준을 높게 하였을 시에는 자동실행 기능이 해제될\n" "수도 있도록 되어 있습니다.\n" "\n" "다시 인쇄 시스템의 자동실행 기능이 활성화되도록\n" "하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765 msgid "Checking installed software..." msgstr "설치된 소프트웨어 확인 중 ..." #: ../../printer/printerdrake.pm_.c:2630 #, fuzzy, c-format msgid "Removing %s ..." msgstr "%s 제거 중" #: ../../printer/printerdrake.pm_.c:2636 #, fuzzy, c-format msgid "Installing %s ..." msgstr "팩키지 설치 중..." #: ../../printer/printerdrake.pm_.c:2685 msgid "Select Printer Spooler" msgstr "프린터 스풀러을 선택하세요." #: ../../printer/printerdrake.pm_.c:2686 msgid "Which printing system (spooler) do you want to use?" msgstr "어떤 인쇄 시스템(스풀러)을 사용하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2720 #, c-format msgid "Configuring printer \"%s\"..." msgstr "프린터 「%s」 설정 중 ..." #: ../../printer/printerdrake.pm_.c:2731 msgid "Installing Foomatic..." msgstr "Foomatic 설치 중..." #: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838 #: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300 msgid "Printer options" msgstr "프린터 옵션" #: ../../printer/printerdrake.pm_.c:2810 msgid "Preparing Printerdrake..." msgstr "프린터 드레이크 준비 중 ..." #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369 msgid "Configuring applications..." msgstr "프로그램 설정 중 ..." #: ../../printer/printerdrake.pm_.c:2845 msgid "Would you like to configure printing?" msgstr "인쇄 설정을 하시겠습니까?" #: ../../printer/printerdrake.pm_.c:2857 msgid "Printing system: " msgstr "인쇄 시스템:" #: ../../printer/printerdrake.pm_.c:2915 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" "다음 프린터들이 설정되었습니다.\n" "수정하고 싶거나,\n" "정보를 보고 싶다면 프린터를 클릭하세요.\n" "새 프린터를 추가하고 싶다면 「프린터 추가」를 누르세요." #: ../../printer/printerdrake.pm_.c:2916 #, fuzzy msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "다음 프린터들이 설정되었습니다.\n" "수정하고 싶거나,\n" "정보를 보고 싶다면 프린터를 클릭하세요.\n" "새 프린터를 추가하고 싶다면 「프린터 추가」를 누르세요." #: ../../printer/printerdrake.pm_.c:2942 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "프린터 목록 갱신" #: ../../printer/printerdrake.pm_.c:2960 msgid "Change the printing system" msgstr "인쇄시스템 변경" #: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274 msgid "Normal Mode" msgstr "일반 모드" #: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176 #: ../../printer/printerdrake.pm_.c:3363 msgid "Do you want to configure another printer?" msgstr "또다른 프린터를 설정하시겠습니까?" #: ../../printer/printerdrake.pm_.c:3211 msgid "Modify printer configuration" msgstr "인터넷 설정 변경" #: ../../printer/printerdrake.pm_.c:3213 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "프린터 %s: %s: %s\n" "이 프린터에 대해서 무엇을 수정하시겠습니까?" #: ../../printer/printerdrake.pm_.c:3217 msgid "Do it!" msgstr "실행" #: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271 msgid "Printer connection type" msgstr "인터넷 연결 유형" #: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275 msgid "Printer name, description, location" msgstr "프린터 이름, 설명, 위치" #: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293 msgid "Printer manufacturer, model, driver" msgstr "프린터 제조업체, 모델, 드라이버" #: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294 msgid "Printer manufacturer, model" msgstr "프린터 제조업체, 모델" #: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304 msgid "Set this printer as the default" msgstr "이 프린터를 기본으로 설정" #: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319 msgid "Print test pages" msgstr "시험 페이지 인쇄" #: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321 msgid "Know how to use this printer" msgstr "이 프린터의 사용법 알아보기" #: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323 msgid "Remove printer" msgstr "프린터 제거" #: ../../printer/printerdrake.pm_.c:3282 #, c-format msgid "Removing old printer \"%s\"..." msgstr "기존 프린터 「%s」 제거 중 ..." #: ../../printer/printerdrake.pm_.c:3307 msgid "Default printer" msgstr "기본 프린터" #: ../../printer/printerdrake.pm_.c:3308 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "「%s」프린터가 기본 프린터로 설정되었습니다." #: ../../printer/printerdrake.pm_.c:3310 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm_.c:3312 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3313 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3315 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm_.c:3317 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3318 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../printer/printerdrake.pm_.c:3325 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "정말로 「%s」프린터를 제거합니까?" #: ../../printer/printerdrake.pm_.c:3329 #, c-format msgid "Removing printer \"%s\"..." msgstr "프린터 「%s」 제거 중 ..." #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "포맷된 RAID md%d에 파티션을 추가할 수 없습니다." #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid 실패" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid 실패 (raidtool이 설치되어 있지 않을 수 있습니다.)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "RAID 레벨 %d를 위한 파티션들이 충분하지 않습니다.\n" #: ../../security/main.pm_.c:36 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" #: ../../security/main.pm_.c:66 #, fuzzy msgid "Security Level:" msgstr "보안 수준" #: ../../security/main.pm_.c:77 #, fuzzy, c-format msgid " (default value: %s)" msgstr " (기본값)" #: ../../security/main.pm_.c:113 #, fuzzy msgid "Security Alerts:" msgstr "보안 수준" #: ../../security/main.pm_.c:115 #, fuzzy msgid "Security Administrator:" msgstr "보안 관리자 (로그인 또는 이메일)" #: ../../security/main.pm_.c:128 #, fuzzy msgid "Network Options" msgstr "추가 옵션" #: ../../security/main.pm_.c:128 #, fuzzy msgid "System Options" msgstr "추가 옵션" #: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" #: ../../security/main.pm_.c:177 msgid "Periodic Checks" msgstr "" #: ../../security/main.pm_.c:191 #, fuzzy msgid "Please wait, setting security level..." msgstr "희망하는 보안 단계를 선택해 주세요." #: ../../security/main.pm_.c:197 #, fuzzy msgid "Please wait, setting security options..." msgstr "설치 준비중입니다. 잠시 기다리세요." #: ../../services.pm_.c:19 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "ALSA (진보된 리눅스 사운드 아키텍처) 사운드 시스템 실행" #: ../../services.pm_.c:20 msgid "Anacron a periodic command scheduler." msgstr "Anancron은 주기적인 명령 스케쥴러 입니다." #: ../../services.pm_.c:21 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd는 배터리 상태와 syslog를 거쳐서 로그 기록을 감시하는데 사용됩니다.\n" "또한 배터리량이 미약할때 자동으로 시스템을 셧다운 시켜주는 기능도 합니다." #: ../../services.pm_.c:23 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "정해준 시간에 한번에 하나씩 실행시킵니다. at는 batch 명령들을 시스템\n" "로드율이 낮을때 수행시킵니다." #: ../../services.pm_.c:25 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron은 사용자가 지정한 프로그램을 주기적으로 특정 시간에 실행시키는 \n" "표준 UNIX 프로그램입니다. vixie cron은 이 기본 UNIX Cron에 향상된 보안과 \n" "더 강력한 설정옵션 등의 많은 특징을 추가합니다." #: ../../services.pm_.c:28 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM은 텍스트 기반 프로그램들에게 마우스 기능을 지원합니다.\n" "또한 콘솔 화면에서 잘라서 붙이기와 팝업 메뉴 기능을 \n" "지원합니다." #: ../../services.pm_.c:31 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "하드드레이크는 하드웨어 검색을 수행하며, 필요하다면\n" "새/변경된 하드웨어를 설정합니다." #: ../../services.pm_.c:33 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "아파치(Apache)는 웹 서버입니다. 이것은 HTML이나 CGI 파일 서비스를\n" "하는데 사용됩니다." #: ../../services.pm_.c:34 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "(통상적으로 inetd라고 하는) 인터넷 수퍼 대몬은 다양한 인터넷 서버를\n" "필요한 때 실행 시킵니다. 텔넷, FTP, RSH, RLOGIN 등과 같은 많은 \n" "서비스를 관리합니다. 이것이 실행되어 있지 않으면, 또한 이것이 관리하는\n" "여러 서비스도 또한 불가능하게 됩니다." #: ../../services.pm_.c:38 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "2.2 커널 시리즈용 패킷 필터를 실행, 네트웍 공격으로부터\n" "컴퓨터를 보호하는 방화벽을 구축합니다." #: ../../services.pm_.c:40 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "이 팩키지는 「/etc/sysconfig/keyboard」에 설정되어 있는 \n" "키보드 맵을 적재합니다. 키보드는 「kbdconfig」명령으로 선택할 수 있습니다.\n" "대부분의 시스템에서 필요한 것입니다." #: ../../services.pm_.c:43 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "「/usr/include/linux/{autoconf,version}.h」에 대해\n" "「/boot」에 커널 헤더를 자동 생성." #: ../../services.pm_.c:45 msgid "Automatic detection and configuration of hardware at boot." msgstr "부팅시에 자동 하드웨어 검색 및 설정." #: ../../services.pm_.c:46 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "리눅스 설정(Linuxconf)은 시스템 설정을 유지하기 위하여\n" "부팅시에 다양한 작업 수행을 준비합니다." #: ../../services.pm_.c:48 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "LPD는 lpr 명령이 올바르게 작동하기 위해 필요한 인쇄 대몬입니다.\n" "근본적으로 인쇄 작업들을 프린터로 중재해 주는 서버입니다." #: ../../services.pm_.c:50 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "리눅스 가상 서버, 고성능 서버 구축에\n" "사용됩니다." #: ../../services.pm_.c:52 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "NAMED(BIND)는 호스트 이름으로 IP 주소를 찾아내는데 사용되는\n" "도메인 네임 서버입니다." #: ../../services.pm_.c:53 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "네트웍 파일 시스템(NFS), 삼바(SMB/랜 관리자/윈도우즈), 그리고\n" "NCP(넷웨어)를 마운트하고 언마운트합니다." #: ../../services.pm_.c:55 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "부팅시에 시작하도록 설정된 모든 네트웍 인테페이스를 \n" "활성화/비활성화 합니다." #: ../../services.pm_.c:57 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n" "이 서비스는 /etc/export 파일을 설정함으로써 NFS 서버의 기능을 가능하게\n" "합니다." #: ../../services.pm_.c:60 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n" "이 서비스는 NFS 파일 잠금 기능을 제공합니다." #: ../../services.pm_.c:62 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "부팅시에 자동으로 콘솔과 X 환경에서\n" "숫자키 잠금 모드 사용." #: ../../services.pm_.c:64 msgid "Support the OKI 4w and compatible winprinters." msgstr "OKI 4w 및 호환 프린터 지원." #: ../../services.pm_.c:65 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA는 보통 랩탑(노트북)에 있는 이더넷 카드와 모뎀같은 장치\n" "들을 지원하기 위한 것입니다. 추가 설정이 없으면 시작되지 않기 때문에,\n" "이러한 장치가 없는 컴퓨터에 설치되어 있어도 안전합니다." #: ../../services.pm_.c:68 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "포트맵퍼(portmapper)는 NFS와 NIS 같은 프로토콜에 의해 사용되는\n" "RPC 연결을 관리합니다. 포트맵 서버는 RPC 메커니즘을 이용하는 프로토콜용 서버" "로\n" "사용되고 있는 컴퓨터에는 반드시 실행되고 있어야 합니다." #: ../../services.pm_.c:71 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "포스트픽스(Postfix)는 컴퓨터들간에 메일을 주고받는 \n" "메일 전송 에이전트 프로그램입니다." #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "고품질의 난수 생성을 위해 시스템 엔트로피 풀을 저장하고 \n" "복구합니다." #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "오라클 같은 프로그램을 사용하기 위해 날(RAW) 장치를\n" "(하드디스크 파티션 같은) 블록 장치로 할당." #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Routed 데몬은 RIP 프로토콜을 통해 자동으로 IP 라우터 테이블이 갱신되도록 합니" "다.\n" "RIP는 소규모 네트웍을 위한 것이기 때문에, 대규모 네트웍을 위해서는 보다 복잡" "한\n" "라우팅 프로토콜이 필요합니다." #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat 프로토콜은 네트웍상의 사용자가 구 네트워상에 있는 \n" "모든 컴퓨터에 대하여 수행능력 메트릭스를 알아 볼 수 있게 합니다." #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers 프로토콜은 네트웍상의 사용자들이 다른 컴퓨터상에 로그인한 \n" "사용자들의 신원을 알 수 있게 합니다." #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho 프로토콜은 (finger와 비슷하게) rwho 대몬이 실행되고\n" "있는 컴퓨터에 로그인한 사용자 목록을 원격 사용자가 볼 수 있게 합니다." #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "이 컴퓨터에서 사운드 시스템 실행" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog는 여러 데몬들의 로그 메세지를 여러 종류의 시스템 로그 파일로\n" "남기는데 유용합니다. 항상 Syslog를 실행시키는것이 좋습니다." #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "USB 장치용 드라이버 적재." #: ../../services.pm_.c:89 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "X 폰트 서버 시작 (X 윈도우를 운영하기 위해서는 필수입니다)." #: ../../services.pm_.c:115 ../../services.pm_.c:157 msgid "Choose which services should be automatically started at boot time" msgstr "어떤 서비스가 부팅시에 자동 실행되어야 할지 선택하세요." #: ../../services.pm_.c:127 msgid "Printing" msgstr "인쇄" #: ../../services.pm_.c:128 msgid "Internet" msgstr "인터넷" #: ../../services.pm_.c:131 msgid "File sharing" msgstr "파일 공유" #: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709 msgid "System" msgstr "시스템" #: ../../services.pm_.c:138 msgid "Remote Administration" msgstr "원격 관리" #: ../../services.pm_.c:146 msgid "Database Server" msgstr "데이터베이스 서버" # #msgid "Services: %d activated for %d registered" # #msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨" #: ../../services.pm_.c:175 #, fuzzy, c-format msgid "Services: %d activated for %d registered" msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨" #: ../../services.pm_.c:191 msgid "Services" msgstr "서비스" #: ../../services.pm_.c:203 msgid "running" msgstr "실행중" #: ../../services.pm_.c:203 msgid "stopped" msgstr "정지됨" #: ../../services.pm_.c:217 msgid "Services and deamons" msgstr "서비스와 대몬" #: ../../services.pm_.c:222 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "죄송합니다.\n" "이 서비스에 대한 추가정보가 없습니다." #: ../../services.pm_.c:229 msgid "On boot" msgstr "자동실행" #: ../../services.pm_.c:241 msgid "Start" msgstr "시작" #: ../../services.pm_.c:241 msgid "Stop" msgstr "중지" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "맨드레이크 리눅스 9.0를 선택해 주셔서 감사합니다." #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "공개 소스 세계에 오신 것을 환영합니다." #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" #: ../../share/advertising/02-community.pl_.c:9 msgid "Get involved in the Free Software world" msgstr "자유 소프트웨어 세계에 참여하세요." #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" #: ../../share/advertising/03-internet.pl_.c:9 msgid "Get the most from the Internet" msgstr "인터넷에서 마음껏 구해 보세요." #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "게임" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "" #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49 msgid "Mandrake Control Center" msgstr "맨드레이크 제어 센터" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "" #: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "사용자 인터페이스" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" #: ../../share/advertising/08-development.pl_.c:9 msgid "Development simplified" msgstr "간편한 개발" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "보안 최적화" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:9 msgid "Become a MandrakeExpert" msgstr "맨드레이크 전문가가 되세요." #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 msgid "MandrakeExpert Corporate" msgstr "맨드레이크 전문가 법인" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" #: ../../standalone.pm_.c:21 msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../standalone.pm_.c:40 msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version name.\n" msgstr "" #: ../../standalone.pm_.c:51 msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm_.c:57 msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm_.c:68 msgid "" "[OPTIONS]...\n" "\t --debug print debugging information" msgstr "" #: ../../standalone.pm_.c:70 msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm_.c:82 #, fuzzy msgid "[keyboard]" msgstr "키보드" #: ../../standalone.pm_.c:83 msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm_.c:84 msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm_.c:93 msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm_.c:94 msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm_.c:99 msgid "" "[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] " "[--dynamic=dev]" msgstr "" #: ../../standalone.pm_.c:100 msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm_.c:114 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm_.c:168 msgid "Installing packages..." msgstr "팩키지 설치 중..." #: ../../standalone/XFdrake_.c:138 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "로그아웃하고 Crtl-Alt-BackSpace키를 누르세요." #: ../../standalone/XFdrake_.c:142 #, c-format msgid "Please relog into %s to activate the changes" msgstr "변경사항을 적용하려면 %s로 재로그인 하세요." #: ../../standalone/drakTermServ_.c:239 msgid "Mandrake Terminal Server Configuration" msgstr "맨드레이크 터미널 서버 설정" #: ../../standalone/drakTermServ_.c:253 msgid "Enable Server" msgstr "서버 사용" #: ../../standalone/drakTermServ_.c:260 msgid "Disable Server" msgstr "서버 사용 해제" #: ../../standalone/drakTermServ_.c:268 msgid "Start Server" msgstr "서버 시작" #: ../../standalone/drakTermServ_.c:275 msgid "Stop Server" msgstr "서버 중지" #: ../../standalone/drakTermServ_.c:283 msgid "Etherboot Floppy/ISO" msgstr "" #: ../../standalone/drakTermServ_.c:288 msgid "Net Boot Images" msgstr "" #: ../../standalone/drakTermServ_.c:294 msgid "Add/Del Users" msgstr "사용자 추가/제거" #: ../../standalone/drakTermServ_.c:299 msgid "Add/Del Clients" msgstr "클라이언트 추가/제거" #: ../../standalone/drakTermServ_.c:328 msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:332 msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:365 msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t/*type fat;*/\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"/*type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"*/\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/" "etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:488 msgid "Boot Floppy" msgstr "부트 플로피" #: ../../standalone/drakTermServ_.c:490 msgid "Boot ISO" msgstr "부트 ISO" #: ../../standalone/drakTermServ_.c:559 msgid "Build Whole Kernel -->" msgstr "" #: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591 msgid "This will take a few minutes." msgstr "" #: ../../standalone/drakTermServ_.c:573 msgid "No kernel selected!" msgstr "커널이 선택되지 않았습니다!" #: ../../standalone/drakTermServ_.c:576 msgid "Build Single NIC -->" msgstr "" #: ../../standalone/drakTermServ_.c:587 msgid "No nic selected!" msgstr "네트웍 카드가 선택 안됨!" #: ../../standalone/drakTermServ_.c:590 msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakTermServ_.c:604 msgid "<-- Delete" msgstr "<-- 삭제" #: ../../standalone/drakTermServ_.c:611 msgid "Delete All NBIs" msgstr "모든 NBI 삭제" #: ../../standalone/drakTermServ_.c:668 msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ_.c:673 msgid "Add User -->" msgstr "사용자 추가 -->" #: ../../standalone/drakTermServ_.c:681 msgid "<-- Del User" msgstr "" #: ../../standalone/drakTermServ_.c:720 #, fuzzy, c-format msgid "type: %s" msgstr "유형: " #: ../../standalone/drakTermServ_.c:753 msgid "No net boot images created!" msgstr "" #: ../../standalone/drakTermServ_.c:773 #, fuzzy msgid "Thin Client" msgstr "DHCP 클라이언트" #: ../../standalone/drakTermServ_.c:775 #, fuzzy msgid "Allow Thin Clients" msgstr "클라이언트 추가/제거" #: ../../standalone/drakTermServ_.c:778 msgid "Add Client -->" msgstr "" #: ../../standalone/drakTermServ_.c:821 #, fuzzy msgid "<-- Edit Client" msgstr "<-- 클라이언트 삭제" #: ../../standalone/drakTermServ_.c:837 #, fuzzy msgid "Delete Client" msgstr "<-- 클라이언트 삭제" #: ../../standalone/drakTermServ_.c:843 msgid "dhcpd Config..." msgstr "DHCPD 설정 중..." #: ../../standalone/drakTermServ_.c:876 msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ_.c:894 msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ_.c:901 #, fuzzy msgid "Netmask:" msgstr "넷마스크" #: ../../standalone/drakTermServ_.c:908 msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ_.c:915 msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ_.c:922 msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ_.c:929 #, fuzzy msgid "Domain Name:" msgstr "도메인 이름" #: ../../standalone/drakTermServ_.c:937 #, fuzzy msgid "Name Servers:" msgstr "삼바 서비스" #: ../../standalone/drakTermServ_.c:948 msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ_.c:949 msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ_.c:1001 #, fuzzy msgid "dhcpd Server Configuration" msgstr "고급 설정" #: ../../standalone/drakTermServ_.c:1002 msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ_.c:1005 msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ_.c:1018 msgid "Write Config" msgstr "설정 기록" #: ../../standalone/drakTermServ_.c:1120 msgid "Please insert floppy disk:" msgstr "플로피를 넣어 주세요:" #: ../../standalone/drakTermServ_.c:1124 msgid "Couldn't access the floppy!" msgstr "" #: ../../standalone/drakTermServ_.c:1126 msgid "Floppy can be removed now" msgstr "" #: ../../standalone/drakTermServ_.c:1129 msgid "No floppy drive available!" msgstr "유효한 프로피 드라이브를 찾을 수 없습니다!" #: ../../standalone/drakTermServ_.c:1138 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../standalone/drakTermServ_.c:1140 msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../standalone/drakTermServ_.c:1159 msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/drakTermServ_.c:1451 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakautoinst_.c:40 msgid "Error!" msgstr "오류!" #: ../../standalone/drakautoinst_.c:41 #, c-format msgid "I can't find needed image file `%s'." msgstr "필요한 이미지 파일 %s를 찾을 수 없습니다." #: ../../standalone/drakautoinst_.c:43 msgid "Auto Install Configurator" msgstr "자동 설치 설정기" #: ../../standalone/drakautoinst_.c:44 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "이제 자동 설치 플로피를 만들 것입니다. 이것은 다소 위험한 작업이 될 수 있으" "며, 신중하게 사용되어져야 합니다.\n" "\n" "이것의 특징은, 일부 값을 변경하기 위하여 일부 과정에서 대화모드가 나타나기는 " "하지만, 기본적으로 이 컴퓨터에서 수행한 설치작업을 자동반복하게 합니다.\n" "\n" "안전상의 이유로, 이 컴퓨터상에서의 설치과정과는 상관없이, 파티션 나누기와 포" "맷하기는 자동으로 이루어지지 않습니다.\n" "\n" "계속 진행합니까?" #: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71 msgid "manual" msgstr "" #: ../../standalone/drakautoinst_.c:62 #, fuzzy msgid "replay" msgstr "재시도" #: ../../standalone/drakautoinst_.c:66 msgid "Automatic Steps Configuration" msgstr "자동 과정 설정기" #: ../../standalone/drakautoinst_.c:67 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "각 과정에 대하여 수동설치와 자동반복설치를 선택하세요." #: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79 msgid "Creating auto install floppy" msgstr "자동 설치 플로피 생성" #: ../../standalone/drakautoinst_.c:139 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504 #: ../../standalone/scannerdrake_.c:117 msgid "Congratulations!" msgstr "축하합니다!" #: ../../standalone/drakautoinst_.c:235 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "플로피가 성공적으로 생성되었습니다.\n" "이젠 설치과정를 반복할 수 있습니다." #: ../../standalone/drakautoinst_.c:273 msgid "Auto Install" msgstr "자동 설치" #: ../../standalone/drakautoinst_.c:343 msgid "Add an item" msgstr "항목 추가" #: ../../standalone/drakautoinst_.c:350 msgid "Remove the last item" msgstr "마지막 항목 삭제" #: ../../standalone/drakbackup_.c:580 msgid "Cron not available yet as non-root" msgstr "" #: ../../standalone/drakbackup_.c:690 msgid "WARNING" msgstr "" #: ../../standalone/drakbackup_.c:691 #, fuzzy msgid "FATAL" msgstr "FAT" #: ../../standalone/drakbackup_.c:692 msgid "INFO" msgstr "" #: ../../standalone/drakbackup_.c:704 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:705 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:709 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803 #: ../../standalone/drakbackup_.c:859 msgid "Total progess" msgstr "전체 진행" #: ../../standalone/drakbackup_.c:785 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../standalone/drakbackup_.c:794 msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/drakbackup_.c:801 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakbackup_.c:818 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../standalone/drakbackup_.c:819 #, fuzzy, c-format msgid "Bad password on %s" msgstr "암호 없음" #: ../../standalone/drakbackup_.c:820 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/drakbackup_.c:821 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "%s를 열 수 없습니다: %s\n" #: ../../standalone/drakbackup_.c:824 #, c-format msgid "%s not responding" msgstr "" #: ../../standalone/drakbackup_.c:828 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../standalone/drakbackup_.c:873 msgid "WebDAV remote site already in sync!" msgstr "" #: ../../standalone/drakbackup_.c:877 msgid "WebDAV transfer failed!" msgstr "" #: ../../standalone/drakbackup_.c:898 msgid "No CDR/DVDR in drive!" msgstr "" #: ../../standalone/drakbackup_.c:902 msgid "Does not appear to be recordable media!" msgstr "" #: ../../standalone/drakbackup_.c:906 msgid "Not erasable media!" msgstr "" #: ../../standalone/drakbackup_.c:945 msgid "This may take a moment to erase the media." msgstr "" #: ../../standalone/drakbackup_.c:1033 msgid "Permission problem accessing CD." msgstr "" #: ../../standalone/drakbackup_.c:1060 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223 msgid "Backup system files..." msgstr "시스템 파일 백업..." #: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291 msgid "Hard Disk Backup files..." msgstr "하드 디스크 백업 파일들" #: ../../standalone/drakbackup_.c:1236 msgid "Backup User files..." msgstr "사요자 파일 백업..." #: ../../standalone/drakbackup_.c:1237 msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakbackup_.c:1290 msgid "Backup Other files..." msgstr "다른 파일 백업..." #: ../../standalone/drakbackup_.c:1296 msgid "No changes to backup!" msgstr "백업할 변경사항이 없습니다!" #: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1319 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakbackup_.c:1322 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:1340 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1345 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:1354 msgid " Error during mail sending. \n" msgstr "메일 전송 중 오류.\n" #: ../../standalone/drakbackup_.c:1380 msgid "Can't create catalog!" msgstr "" #: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501 #: ../../standalone/drakfont_.c:946 msgid "File Selection" msgstr "파일 선택" #: ../../standalone/drakbackup_.c:1529 msgid "Select the files or directories and click on 'Add'" msgstr "" #: ../../standalone/drakbackup_.c:1573 msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../standalone/drakbackup_.c:1574 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../standalone/drakbackup_.c:1575 #, fuzzy msgid "Backup your System files. (/etc directory)" msgstr "시스템 파일 먼저 백업:" #: ../../standalone/drakbackup_.c:1576 msgid "Use incremental backup (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1577 msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/drakbackup_.c:1578 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakbackup_.c:1595 msgid "Please check all users that you want to include in your backup." msgstr "백업에 포함할 모든 사용자를 확인하세요." #: ../../standalone/drakbackup_.c:1622 msgid "Do not include the browser cache" msgstr "" #: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647 msgid "Use Incremental Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000 msgid "Remove Selected" msgstr "선택 항목 제거" #: ../../standalone/drakbackup_.c:1679 msgid "Windows (FAT32)" msgstr "윈도우즈(FAT32)" #: ../../standalone/drakbackup_.c:1714 msgid "Users" msgstr "사용자들" #: ../../standalone/drakbackup_.c:1740 msgid "Use network connection to backup" msgstr "네트웍을 사용해 백업" #: ../../standalone/drakbackup_.c:1742 msgid "Net Method:" msgstr "" #: ../../standalone/drakbackup_.c:1746 msgid "Use Expect for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1747 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" #: ../../standalone/drakbackup_.c:1748 msgid "" " Transfer \n" "Now" msgstr "" " 지금 \n" "전송" #: ../../standalone/drakbackup_.c:1749 msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" #: ../../standalone/drakbackup_.c:1753 msgid "Please enter the host name or IP." msgstr "호스트 이름 또는 IP를 입력하세요." #: ../../standalone/drakbackup_.c:1758 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" #: ../../standalone/drakbackup_.c:1763 msgid "Please enter your login" msgstr "아이디를 입력하세요." #: ../../standalone/drakbackup_.c:1768 msgid "Please enter your password" msgstr "비밀번호를 입력하세요." #: ../../standalone/drakbackup_.c:1774 msgid "Remember this password" msgstr "비밀번호 기억" #: ../../standalone/drakbackup_.c:1785 msgid "Need hostname, username and password!" msgstr "" #: ../../standalone/drakbackup_.c:1879 msgid "Use CD/DVDROM to backup" msgstr "" #: ../../standalone/drakbackup_.c:1882 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" #: ../../standalone/drakbackup_.c:1887 msgid "Please choose your CD/DVD media size (Mb)" msgstr "CD/DVD 용량을 선택하세요." #: ../../standalone/drakbackup_.c:1893 #, fuzzy msgid "Please check for multisession CD" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../standalone/drakbackup_.c:1899 msgid "Please check if you are using CDRW media" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../standalone/drakbackup_.c:1905 #, fuzzy msgid "Please check if you want to erase your RW media (1st Session)" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../standalone/drakbackup_.c:1906 msgid " Erase Now " msgstr " 지금 삭제" #: ../../standalone/drakbackup_.c:1912 #, fuzzy msgid "Please check if you are using a DVDR device" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../standalone/drakbackup_.c:1918 #, fuzzy msgid "Please check if you are using a DVDRAM device" msgstr "CDRW 매체를 사용하고 있는지 확인하세요." #: ../../standalone/drakbackup_.c:1931 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/drakbackup_.c:1964 msgid "No CD device defined!" msgstr "CD 장치가 정의되지 않았습니다!" #: ../../standalone/drakbackup_.c:2012 msgid "Use tape to backup" msgstr "테입을 사용한 백업" #: ../../standalone/drakbackup_.c:2015 msgid "Please enter the device name to use for backup" msgstr "" #: ../../standalone/drakbackup_.c:2021 #, fuzzy msgid "Please check if you want to use the non-rewinding device." msgstr "백업하기 전에 테입을 지울지 확인하세요." #: ../../standalone/drakbackup_.c:2027 msgid "Please check if you want to erase your tape before the backup." msgstr "백업하기 전에 테입을 지울지 확인하세요." #: ../../standalone/drakbackup_.c:2033 #, fuzzy msgid "Please check if you want to eject your tape after the backup." msgstr "백업하기 전에 테입을 지울지 확인하세요." #: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112 #: ../../standalone/drakbackup_.c:3068 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" #: ../../standalone/drakbackup_.c:2103 msgid "Please enter the directory to save to:" msgstr "저장할 디렉토리를 선택하세요." #: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074 msgid "Use quota for backup files." msgstr "백업 파일에 쿼터 사용" #: ../../standalone/drakbackup_.c:2180 msgid "Network" msgstr "네트웍" #: ../../standalone/drakbackup_.c:2185 msgid "CDROM / DVDROM" msgstr "CDROM / DVDROM" #: ../../standalone/drakbackup_.c:2190 msgid "HardDrive / NFS" msgstr "하드 디스크 / NFS" #: ../../standalone/drakbackup_.c:2195 msgid "Tape" msgstr "테입" #: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212 #: ../../standalone/drakbackup_.c:2216 msgid "hourly" msgstr "매시" #: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213 #: ../../standalone/drakbackup_.c:2216 msgid "daily" msgstr "매일" #: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214 #: ../../standalone/drakbackup_.c:2216 msgid "weekly" msgstr "매주" #: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215 #: ../../standalone/drakbackup_.c:2216 msgid "monthly" msgstr "매월" #: ../../standalone/drakbackup_.c:2229 msgid "Use daemon" msgstr "대몬 사용" #: ../../standalone/drakbackup_.c:2234 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" "백업간 시간 간격을\n" "선택하세요." #: ../../standalone/drakbackup_.c:2240 msgid "" "Please choose the\n" "media for backup." msgstr "" "백업용 매체를\n" "선택하세요." #: ../../standalone/drakbackup_.c:2247 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" #: ../../standalone/drakbackup_.c:2283 msgid "Send mail report after each backup to:" msgstr "백업 후 보고 메일 보내기:" #: ../../standalone/drakbackup_.c:2289 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../standalone/drakbackup_.c:2324 msgid "What" msgstr "대상" #: ../../standalone/drakbackup_.c:2329 msgid "Where" msgstr "장소" #: ../../standalone/drakbackup_.c:2334 msgid "When" msgstr "시간" #: ../../standalone/drakbackup_.c:2339 msgid "More Options" msgstr "추가 옵션" #: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444 msgid "Drakbackup Configuration" msgstr "드레이크 백업 설정" #: ../../standalone/drakbackup_.c:2376 msgid "Please choose where you want to backup" msgstr "백업할 곳을 선택하세요." #: ../../standalone/drakbackup_.c:2378 msgid "on Hard Drive" msgstr "하드 드라이브" #: ../../standalone/drakbackup_.c:2388 msgid "across Network" msgstr "네트웍 경유" #: ../../standalone/drakbackup_.c:2398 msgid "on CDROM" msgstr "" #: ../../standalone/drakbackup_.c:2406 msgid "on Tape Device" msgstr "" #: ../../standalone/drakbackup_.c:2449 msgid "Please choose what you want to backup" msgstr "백업할 대상을 선택하세요." #: ../../standalone/drakbackup_.c:2450 msgid "Backup system" msgstr "백업 시스템" #: ../../standalone/drakbackup_.c:2451 msgid "Backup Users" msgstr "사용자 백업" #: ../../standalone/drakbackup_.c:2454 msgid "Select user manually" msgstr "수동으로 사용자 선택" #: ../../standalone/drakbackup_.c:2537 msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup_.c:2538 msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2540 msgid "" "\n" "- User Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2542 msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../standalone/drakbackup_.c:2544 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2547 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakbackup_.c:2553 msgid "" "\n" "- Burn to CD" msgstr "" #: ../../standalone/drakbackup_.c:2554 msgid "RW" msgstr "" #: ../../standalone/drakbackup_.c:2555 #, c-format msgid " on device: %s" msgstr "장치: %s" #: ../../standalone/drakbackup_.c:2556 msgid " (multi-session)" msgstr "" #: ../../standalone/drakbackup_.c:2557 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup_.c:2558 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup_.c:2561 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../standalone/drakbackup_.c:2562 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../standalone/drakbackup_.c:2563 #, fuzzy msgid "" "\n" "- Options:\n" msgstr "옵션들" #: ../../standalone/drakbackup_.c:2564 msgid "\tDo not include System Files\n" msgstr "" #: ../../standalone/drakbackup_.c:2567 msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup_.c:2569 msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/drakbackup_.c:2572 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" #: ../../standalone/drakbackup_.c:2573 msgid "\t-Hard drive.\n" msgstr "" #: ../../standalone/drakbackup_.c:2574 msgid "\t-CDROM.\n" msgstr "" #: ../../standalone/drakbackup_.c:2575 msgid "\t-Tape \n" msgstr "" #: ../../standalone/drakbackup_.c:2576 msgid "\t-Network by FTP.\n" msgstr "" #: ../../standalone/drakbackup_.c:2577 msgid "\t-Network by SSH.\n" msgstr "" #: ../../standalone/drakbackup_.c:2578 msgid "\t-Network by rsync.\n" msgstr "" #: ../../standalone/drakbackup_.c:2579 msgid "\t-Network by webdav.\n" msgstr "" #: ../../standalone/drakbackup_.c:2581 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakbackup_.c:2587 msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2754 msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:2756 msgid "Please uncheck or remove it on next time." msgstr "다음 번에는 그것을 선택 해제 또는 제거하세요." #: ../../standalone/drakbackup_.c:2766 msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakbackup_.c:2787 msgid " All of your selected data have been " msgstr "" #: ../../standalone/drakbackup_.c:2788 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../standalone/drakbackup_.c:2906 msgid " Restore Configuration " msgstr " 설정 복구 " #: ../../standalone/drakbackup_.c:2924 msgid "OK to restore the other files." msgstr "다른 파일들을 목구하려면, OK를 누르세요." #: ../../standalone/drakbackup_.c:2941 msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakbackup_.c:3019 msgid "Backup the system files before:" msgstr "시스템 파일 먼저 백업:" #: ../../standalone/drakbackup_.c:3021 msgid "please choose the date to restore" msgstr "복구할 날짜를 선택하세요." #: ../../standalone/drakbackup_.c:3057 msgid "Use Hard Disk to backup" msgstr "하드 디스크로 백업" #: ../../standalone/drakbackup_.c:3060 msgid "Please enter the directory to save:" msgstr "저장할 디렉토리를 선택하세요:" #: ../../standalone/drakbackup_.c:3103 msgid "FTP Connection" msgstr "FTP 연결" #: ../../standalone/drakbackup_.c:3110 msgid "Secure Connection" msgstr "보안 연결" #: ../../standalone/drakbackup_.c:3134 msgid "Restore from Hard Disk." msgstr "하드 디스크에서 복구" #: ../../standalone/drakbackup_.c:3136 msgid "Please enter the directory where backups are stored" msgstr "백업 파일들이 저장될 디렉토리를 입력하세요." #: ../../standalone/drakbackup_.c:3204 msgid "Select another media to restore from" msgstr "다른 복구 매체 선택" #: ../../standalone/drakbackup_.c:3206 msgid "Other Media" msgstr "다른 매체" #: ../../standalone/drakbackup_.c:3211 msgid "Restore system" msgstr "시스템 복구" #: ../../standalone/drakbackup_.c:3212 msgid "Restore Users" msgstr "사용자들 복구" #: ../../standalone/drakbackup_.c:3213 msgid "Restore Other" msgstr "다른 것들 복구" #: ../../standalone/drakbackup_.c:3215 msgid "select path to restore (instead of /)" msgstr "([/] 대신에) 복구 경로 선택" #: ../../standalone/drakbackup_.c:3219 msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../standalone/drakbackup_.c:3221 msgid "Remove user directories before restore." msgstr "복구하기 전에 사용자 디랙토리들을 제거" #: ../../standalone/drakbackup_.c:3334 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../standalone/drakbackup_.c:3344 msgid "" "Restore Selected\n" "Files" msgstr "" "선택된 파일\n" "복구" #: ../../standalone/drakbackup_.c:3361 msgid "" "Change\n" "Restore Path" msgstr "" "복구 경로\n" "수정" #: ../../standalone/drakbackup_.c:3427 #, c-format msgid "Backup files not found at %s." msgstr "%s에서 백업 파일을 찾을 수 없습니다." #: ../../standalone/drakbackup_.c:3440 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../standalone/drakbackup_.c:3440 msgid "Restore From CD" msgstr "CD로부터 복구" #: ../../standalone/drakbackup_.c:3442 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3452 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../standalone/drakbackup_.c:3452 msgid "Restore From Tape" msgstr "테입으로부터 복구" #: ../../standalone/drakbackup_.c:3454 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakbackup_.c:3474 msgid "Restore Via Network" msgstr "네트웍을 통한 복구" #: ../../standalone/drakbackup_.c:3474 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../standalone/drakbackup_.c:3475 msgid "Host Name" msgstr "호스트명" #: ../../standalone/drakbackup_.c:3476 msgid "Host Path or Module" msgstr "" #: ../../standalone/drakbackup_.c:3483 msgid "Password required" msgstr "암호가 필요합니다." #: ../../standalone/drakbackup_.c:3489 msgid "Username required" msgstr "사용자명이 필요합니다." #: ../../standalone/drakbackup_.c:3492 msgid "Hostname required" msgstr "호스트명이 필요합니다." #: ../../standalone/drakbackup_.c:3497 msgid "Path or Module required" msgstr "" #: ../../standalone/drakbackup_.c:3510 msgid "Files Restored..." msgstr "" #: ../../standalone/drakbackup_.c:3513 msgid "Restore Failed..." msgstr "복구 실패..." #: ../../standalone/drakbackup_.c:3751 msgid "Restore all backups" msgstr "모든 백업 복구" #: ../../standalone/drakbackup_.c:3760 msgid "Custom Restore" msgstr "사용자 정의 복구" #: ../../standalone/drakbackup_.c:3804 msgid "CD in place - continue." msgstr "" #: ../../standalone/drakbackup_.c:3810 msgid "Browse to new restore repository." msgstr "" #: ../../standalone/drakbackup_.c:3813 msgid "Restore From Catalog" msgstr "카탈로그로부터 복구" #: ../../standalone/drakbackup_.c:3841 msgid "Restore Progress" msgstr "복구 진행" #: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916 #: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056 #: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113 #: ../../standalone/drakbackup_.c:4139 msgid "Previous" msgstr "이전" #: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973 #: ../../standalone/logdrake_.c:203 msgid "Save" msgstr "저장" #: ../../standalone/drakbackup_.c:3946 msgid "Build Backup" msgstr "백업 빌드" #: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544 msgid "Restore" msgstr "복구" #: ../../standalone/drakbackup_.c:4189 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../standalone/drakbackup_.c:4195 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakbackup_.c:4209 msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "" "다음 팩키지들이 설치되어야 합니다.\n" " @list_of_rpm_to_install" #: ../../standalone/drakbackup_.c:4232 msgid "Please select data to restore..." msgstr "복구할 데이터를 선택하세요..." #: ../../standalone/drakbackup_.c:4267 msgid "Please select media for backup..." msgstr "백업용 매체를 선택하세요..." #: ../../standalone/drakbackup_.c:4275 msgid "Please select data to backup..." msgstr "백업할 데이터를 선택하세요..." #: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../standalone/drakbackup_.c:4308 msgid "Under Devel ... please wait." msgstr "" #: ../../standalone/drakbackup_.c:4382 msgid "Backup system files" msgstr "시스템 파일 백업" #: ../../standalone/drakbackup_.c:4384 msgid "Backup user files" msgstr "사용자 파일 백업" #: ../../standalone/drakbackup_.c:4386 msgid "Backup other files" msgstr "다른 파일 백업" #: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421 msgid "Total Progress" msgstr "전체 진행" #: ../../standalone/drakbackup_.c:4412 msgid "files sending by FTP" msgstr "FTP로 파일 전송" #: ../../standalone/drakbackup_.c:4416 msgid "Sending files..." msgstr "파일 전송 중 ..." #: ../../standalone/drakbackup_.c:4500 msgid "Backup Now from configuration file" msgstr "지금 설정 파일로부터 백업" #: ../../standalone/drakbackup_.c:4505 msgid "View Backup Configuration." msgstr "백업 설정 보기" #: ../../standalone/drakbackup_.c:4526 msgid "Wizard Configuration" msgstr "마법사 설정" #: ../../standalone/drakbackup_.c:4531 msgid "Advanced Configuration" msgstr "고급 설정" #: ../../standalone/drakbackup_.c:4536 msgid "Backup Now" msgstr "지금 백업" #: ../../standalone/drakbackup_.c:4576 msgid "Drakbackup" msgstr "드레이크 백업" #: ../../standalone/drakbackup_.c:4624 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4654 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4662 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4701 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4727 msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" #: ../../standalone/drakbackup_.c:4729 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" #: ../../standalone/drakbackup_.c:4732 msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4769 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" #: ../../standalone/drakbackup_.c:4778 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" #: ../../standalone/drakboot_.c:50 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s 설치 실패. 다음과 같은 오류가 발생했습니다:" #: ../../standalone/drakbug_.c:45 msgid "Mandrake Bug Report Tool" msgstr "맨드레이크 버그 보고 도구" #: ../../standalone/drakbug_.c:50 msgid "First Time Wizard" msgstr "첫 실행 마법사" #: ../../standalone/drakbug_.c:51 msgid "Synchronization tool" msgstr "동기화 도구" #: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66 #: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135 #: ../../standalone/drakbug_.c:139 msgid "Standalone Tools" msgstr "개별 도구" #: ../../standalone/drakbug_.c:53 msgid "HardDrake" msgstr "하드 드레이크" #: ../../standalone/drakbug_.c:54 msgid "Mandrake Online" msgstr "맨드레이크 온라인" #: ../../standalone/drakbug_.c:55 msgid "Menudrake" msgstr "메뉴 드레이크" #: ../../standalone/drakbug_.c:56 msgid "Msec" msgstr "기타" #: ../../standalone/drakbug_.c:57 msgid "Remote Control" msgstr "원격 제어" #: ../../standalone/drakbug_.c:58 msgid "Software Manager" msgstr "소프트웨어 관리자" #: ../../standalone/drakbug_.c:59 msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbug_.c:60 msgid "Windows Migration tool" msgstr "윈도우즈 이주 도구" #: ../../standalone/drakbug_.c:61 msgid "Userdrake" msgstr "사용자 드레이크" #: ../../standalone/drakbug_.c:62 msgid "Configuration Wizards" msgstr "설정 마법사" #: ../../standalone/drakbug_.c:75 msgid "Application:" msgstr "프로그램:" #: ../../standalone/drakbug_.c:76 msgid "Package: " msgstr "팩키지:" #: ../../standalone/drakbug_.c:77 msgid "Kernel:" msgstr "커널:" #: ../../standalone/drakbug_.c:78 msgid "Release: " msgstr "릴리즈:" #: ../../standalone/drakbug_.c:93 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" #: ../../standalone/drakbug_.c:112 msgid "Report" msgstr "보고" #: ../../standalone/drakbug_.c:148 msgid "Not installed" msgstr "설치되지 않았습니다." #: ../../standalone/drakbug_.c:160 #, fuzzy msgid "Package not installed" msgstr "설치되지 않았습니다." #: ../../standalone/drakbug_.c:173 msgid "connecting to Bugzilla wizard ..." msgstr "버질라 마법사에 연결 중 ..." #: ../../standalone/drakbug_.c:180 msgid "No browser available! Please install one" msgstr "브라우저를 찾을 수 없습니다! 설치해 주세요." #: ../../standalone/drakconnect_.c:75 #, c-format msgid "Network configuration (%d adapters)" msgstr "네트웍 설정 (%d 어뎁터)" #: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591 msgid "Profile: " msgstr "프로파일: " #: ../../standalone/drakconnect_.c:91 msgid "Del profile..." msgstr "프로파일 지우기" #: ../../standalone/drakconnect_.c:97 msgid "Profile to delete:" msgstr "지울 프로파일" #: ../../standalone/drakconnect_.c:125 msgid "New profile..." msgstr "새 프로파일..." #: ../../standalone/drakconnect_.c:131 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "만들 프로파일 이름 (새 프로파일은 현재 프로파일의 사본으로서 만들어 집니다.):" #: ../../standalone/drakconnect_.c:157 msgid "Hostname: " msgstr "호스트명:" #: ../../standalone/drakconnect_.c:164 msgid "Internet access" msgstr "인터넷 액세스" #: ../../standalone/drakconnect_.c:177 msgid "Type:" msgstr "유형: " #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Gateway:" msgstr "게이트웨이:" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Interface:" msgstr "인터페이스:" #: ../../standalone/drakconnect_.c:191 msgid "Status:" msgstr "상태:" #: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145 msgid "Wait please" msgstr "기다려 주세요." #: ../../standalone/drakconnect_.c:216 msgid "Configure Internet Access..." msgstr "인터넷 접근 설정..." #: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445 msgid "LAN configuration" msgstr "LAN 설정" #: ../../standalone/drakconnect_.c:228 msgid "Driver" msgstr "드라이버" #: ../../standalone/drakconnect_.c:228 msgid "Interface" msgstr "인터페이스" #: ../../standalone/drakconnect_.c:228 msgid "Protocol" msgstr "프로토콜" #: ../../standalone/drakconnect_.c:228 msgid "State" msgstr "상태:" #: ../../standalone/drakconnect_.c:240 msgid "Configure Local Area Network..." msgstr "지역 네트웍 설정..." #: ../../standalone/drakconnect_.c:252 msgid "Click here to launch the wizard ->" msgstr "마법사를 실행하려면 여기를 누르세요. ->" #: ../../standalone/drakconnect_.c:253 msgid "Wizard..." msgstr "마법사..." #: ../../standalone/drakconnect_.c:279 msgid "Apply" msgstr "적용" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Connected" msgstr "연결됨" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Not connected" msgstr "연결 안됨" #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Connect..." msgstr "연결..." #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Disconnect..." msgstr "연결 끊기..." #: ../../standalone/drakconnect_.c:400 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakconnect_.c:427 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "설정된 인터페이스가 없습니다.\n" "「설정」을 눌러 인터페이스를 먼저 설정하세요." #: ../../standalone/drakconnect_.c:449 msgid "LAN Configuration" msgstr "LAN 설정" #: ../../standalone/drakconnect_.c:460 #, c-format msgid "Adapter %s: %s" msgstr "어댑터 %s: %s" #: ../../standalone/drakconnect_.c:466 msgid "Boot Protocol" msgstr "부트 프로토콜" #: ../../standalone/drakconnect_.c:467 msgid "Started on boot" msgstr "부팅시 시작됨" #: ../../standalone/drakconnect_.c:468 msgid "DHCP client" msgstr "DHCP 클라이언트" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "activate now" msgstr "지금 활성화" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "deactivate now" msgstr "지금 비활성화" #: ../../standalone/drakconnect_.c:499 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../standalone/drakconnect_.c:556 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "인터넷 연결이 없습니다.\n" "「설정」을 눌러 먼저 연결을 설정하세요." #: ../../standalone/drakconnect_.c:580 msgid "Internet connection configuration" msgstr "인터넷 연결 설정" #: ../../standalone/drakconnect_.c:584 msgid "Internet Connection Configuration" msgstr "인터넷 연결 설정" #: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94 msgid "Connection type: " msgstr "연결 유형: " #: ../../standalone/drakconnect_.c:599 msgid "Parameters" msgstr "인자" #: ../../standalone/drakconnect_.c:618 msgid "Gateway" msgstr "게이트웨이" #: ../../standalone/drakconnect_.c:627 msgid "Ethernet Card" msgstr "이더넷 카드" #: ../../standalone/drakconnect_.c:628 msgid "DHCP Client" msgstr "DHCP 클라이언트" #: ../../standalone/drakfloppy_.c:39 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "" "-misc-fixed-medium-r-*-*-*-140-*-*-*-*-*-*,-*-gulim-medium-r-*-*-*-140-*-*-*-" "*-ksc5601.1987-0,*-r-*" #: ../../standalone/drakfloppy_.c:40 msgid "Module name" msgstr "모듈 이름" #: ../../standalone/drakfloppy_.c:40 msgid "Size" msgstr "크기" #: ../../standalone/drakfloppy_.c:45 msgid "drakfloppy" msgstr "드레이크플로피" #: ../../standalone/drakfloppy_.c:63 msgid "boot disk creation" msgstr "부트 디스크 생성" #: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84 msgid "default" msgstr "기본값" #: ../../standalone/drakfloppy_.c:87 #, c-format msgid "DrakFloppy Error: %s" msgstr "플로피드레이크 오류: %s" #: ../../standalone/drakfloppy_.c:98 msgid "kernel version" msgstr "커널 버전" #: ../../standalone/drakfloppy_.c:104 msgid "General" msgstr "일반 영역" #: ../../standalone/drakfloppy_.c:109 msgid "Expert Area" msgstr "전문가 영역" #: ../../standalone/drakfloppy_.c:112 msgid "mkinitrd optional arguments" msgstr "mkinitrd의 기타 인자" #: ../../standalone/drakfloppy_.c:113 msgid "Add a module" msgstr "모듈 추가" #: ../../standalone/drakfloppy_.c:133 msgid "force" msgstr "강제 추진" #: ../../standalone/drakfloppy_.c:134 msgid "if needed" msgstr "부팅시 적재 모듈이 있을 경우에만 이미지 생성" #: ../../standalone/drakfloppy_.c:135 msgid "omit scsi modules" msgstr "SCSI 모듈 생략" #: ../../standalone/drakfloppy_.c:136 msgid "omit raid modules" msgstr "RAID 모듈 생략" #: ../../standalone/drakfloppy_.c:172 msgid "Remove a module" msgstr "모듈 제거" #: ../../standalone/drakfloppy_.c:194 msgid "Output" msgstr "출력" #: ../../standalone/drakfloppy_.c:206 msgid "Build the disk" msgstr "디스크 생성" #: ../../standalone/drakfloppy_.c:336 #, c-format msgid "Be sure a media is present for the device %s" msgstr "%s 장치에 매체가 들어있는지 확인하세요." #: ../../standalone/drakfloppy_.c:341 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "%s 장치에 매체가 없거나, 쓰기금지되어 있습니다.\n" "매체를 넣어 주세요." #: ../../standalone/drakfloppy_.c:344 #, c-format msgid "Unable to fork: %s" msgstr "분기할 수 없습니다: %s" #: ../../standalone/drakfloppy_.c:349 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "mkbootdisk를 올바르게 종료할 수 없습니다: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:213 msgid "Search installed fonts" msgstr "설치된 폰트 검색" #: ../../standalone/drakfont_.c:215 msgid "Unselect fonts installed" msgstr "설치된 폰트 선택 해제" #: ../../standalone/drakfont_.c:239 msgid "parse all fonts" msgstr "모든 폰트 분석" #: ../../standalone/drakfont_.c:242 msgid "no fonts found" msgstr "폰트를 찾을 수 없습니다." #: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305 #: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454 #: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493 #: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532 msgid "done" msgstr "완료" #: ../../standalone/drakfont_.c:257 msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/drakfont_.c:303 msgid "Reselect correct fonts" msgstr "올바른 폰트 재선택" #: ../../standalone/drakfont_.c:307 msgid "could not find any font.\n" msgstr "폰트를 찾을 수 없었습니다.\n" #: ../../standalone/drakfont_.c:331 msgid "Search fonts in installed list" msgstr "설치된 목록에서 폰트 검색" #: ../../standalone/drakfont_.c:359 msgid "Fonts copy" msgstr "폰트 복사" #: ../../standalone/drakfont_.c:363 msgid "True Type fonts installation" msgstr "트루타입 폰트 설치" #: ../../standalone/drakfont_.c:371 msgid "please wait during ttmkfdir..." msgstr "기다려 주세요. ttmkfdir 실행 중..." #: ../../standalone/drakfont_.c:377 msgid "True Type install done" msgstr "트루타입 설치 완료" #: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413 msgid "Fonts conversion" msgstr "폰트 변환" #: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417 #: ../../standalone/drakfont_.c:450 msgid "type1inst building" msgstr "" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427 msgid "Ghostscript referencing" msgstr "고스트스크립트 참조" #: ../../standalone/drakfont_.c:437 msgid "ttf fonts conversion" msgstr "ttf 폰트 변환" #: ../../standalone/drakfont_.c:444 msgid "pfm fonts conversion" msgstr "pfm 폰트 변환" #: ../../standalone/drakfont_.c:456 msgid "Suppress temporary Files" msgstr "임시 파일 은폐" #: ../../standalone/drakfont_.c:459 msgid "Restart XFS" msgstr "XFS 재시작" #: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526 msgid "Suppress Fonts Files" msgstr "폰트 파일들 은폐" #: ../../standalone/drakfont_.c:528 msgid "xfs restart" msgstr "XFS 재시작" #: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" #: ../../standalone/drakfont_.c:621 msgid "Fonts Importation" msgstr "폰트 수입" #: ../../standalone/drakfont_.c:650 msgid "Get Windows Fonts" msgstr "윈도우즈 폰트 가져오기" #: ../../standalone/drakfont_.c:658 msgid "Uninstall Fonts" msgstr "폰트 제거" #: ../../standalone/drakfont_.c:669 msgid "Advanced Options" msgstr "고급 옵션" #: ../../standalone/drakfont_.c:677 msgid "Font List" msgstr "폰트 목록" #: ../../standalone/drakfont_.c:737 msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:793 msgid "" "drakfont Future Overview\n" " - Fonts import:\n" " pfb ( Adobe Type 1 binary )\n" " pfa ( Adobe Type 1 ASCII )\n" " ttf ( True-Type )\n" " pcf.gz\n" " Speedo\n" " and Bitmap (PCF, BDF, and SNF)\n" " - Features\n" " - Install fonts from any directory\n" " - Get windows fonts on any vfat partitions\n" " - Get fonts on any partitions.\n" " - UN-installation of any fonts (even if not installed " "through drakfont)\n" " - Support\n" " - Xfs\n" " - ghostscript & printer\n" " - Staroffice & printer\n" " - abiword\n" "\t - netscape\n" " - Koffice, Gnumeric, ... studying\n" " - all fonts supported by printer\n" " - anti-aliases by RENDER in Xfree86 .... \n" "\t\t\t\tsupported by KDE.\n" "\t\t\t\twill be supported by gnome 1.2.\n" "Visual Interface:\n" " Window interface:\n" " - Fontselectiondialog widget\n" " - Command buttons under Fontselectiondialog (like the actual " "frontend).\n" " Commands buttons:\n" " - import from windows partition.\n" " import from all fat32 partitions and look for winnt/windows/" "font\n" " and import all (delete doublon) but don't import if already " "exist.\n" " - import from directory\n" " look for if it exist before for each font and not delete the " "original.\n" " (replace all, no, none)\n" " expert options:\n" " ask the directory, and look for if it exist before\n" " if it exist ask: (replace all, no, none)\n" " - uninstall with list per font type\n" " Expert additional switch\n" " - option support: ghostscript, Staroffice, etc...\n" " check-button. (by default all check)\n" " - Printer Application Fonts Support...\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:862 msgid "Choose the applications that will support the fonts:" msgstr "이 폰트를 지원할 프로그램들을 선택하세요" #: ../../standalone/drakfont_.c:870 msgid "Ghostscript" msgstr "고스트스크립트" #: ../../standalone/drakfont_.c:877 msgid "StarOffice" msgstr "스타 오피스" #: ../../standalone/drakfont_.c:884 msgid "Abiword" msgstr "아비워드" #: ../../standalone/drakfont_.c:891 msgid "Generic Printers" msgstr "일반 프린터" #: ../../standalone/drakfont_.c:958 msgid "Select the font file or directory and click on 'Add'" msgstr "폰트 파일이나 디렉토리를 선택 후, '추가'를 누르세요." #: ../../standalone/drakfont_.c:1005 msgid "Install List" msgstr "설치 목록" #: ../../standalone/drakfont_.c:1048 msgid "click here if you are sure." msgstr "이상이 없으면 여기를 누르세요." #: ../../standalone/drakfont_.c:1055 msgid "here if no." msgstr "그렇지 않다면, 여기를 누르세요." #: ../../standalone/drakfont_.c:1112 msgid "Unselected All" msgstr "모든 선택 해제" #: ../../standalone/drakfont_.c:1116 msgid "Selected All" msgstr "모두 선택" #: ../../standalone/drakfont_.c:1120 msgid "Remove List" msgstr "제거 목록" #: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175 msgid "Initials tests" msgstr "초기화 테스트" #: ../../standalone/drakfont_.c:1145 msgid "Copy fonts on your system" msgstr "시스템 폰트 복사" #: ../../standalone/drakfont_.c:1149 msgid "Install & convert Fonts" msgstr "폰트 설치 및 변환" #: ../../standalone/drakfont_.c:1153 msgid "Post Install" msgstr "후반 설치" #: ../../standalone/drakfont_.c:1178 msgid "Remove fonts on your system" msgstr "시스템 폰트 제거" #: ../../standalone/drakfont_.c:1182 msgid "Post Uninstall" msgstr "후반 설치제거" #: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182 msgid "Internet Connection Sharing" msgstr "인터넷 연결 공유" #: ../../standalone/drakgw_.c:114 msgid "Sorry, we support only 2.4 kernels." msgstr "죄송합니다. 2.4 커널만 지원됩니다." #: ../../standalone/drakgw_.c:125 msgid "Internet Connection Sharing currently enabled" msgstr "현재 인터넷 연결 공유가 가능한 상태입니다." #: ../../standalone/drakgw_.c:126 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "인터넷 연결공유 설정은 이미 완료되었습니다.\n" "현재 가능한 상태입니다.\n" "\n" "무슨 작업을 하시겠습니까?" #: ../../standalone/drakgw_.c:130 msgid "disable" msgstr "해제" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "dismiss" msgstr "취소" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "reconfigure" msgstr "재설정" #: ../../standalone/drakgw_.c:133 msgid "Disabling servers..." msgstr "서버 중지 중..." #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "이제 인터넷 연결 공유가 금지되었습니다." #: ../../standalone/drakgw_.c:149 msgid "Internet Connection Sharing currently disabled" msgstr "현재 인터넷 연결 공유가 불가능한 상태입니다." #: ../../standalone/drakgw_.c:150 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "인터넷 연결공유 설정은 이미 완료되었습니다.\n" "현재 불가능한 상태입니다.\n" "\n" "무슨 작업을 하시겠습니까?" #: ../../standalone/drakgw_.c:154 msgid "enable" msgstr "허용" #: ../../standalone/drakgw_.c:161 msgid "Enabling servers..." msgstr "서버 허용 중" #: ../../standalone/drakgw_.c:166 msgid "Internet connection sharing is now enabled." msgstr "이제 인터넷 연결 공유가 허용되었습니다." #: ../../standalone/drakgw_.c:183 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "이제 인터넷 연결 공유를 위해서 님의 컴퓨터를 설정하려고 합니다.\n" "이로인해, 지역 네트웍의 다른 컴퓨터들도 이 컴퓨터의 인터넷 연결을 사용할 수 " "있게 됩니다.\n" "\n" "주의: 지역 네트웍(랜)을 목적으로 설치된 네트웍 어댑터가 있어야 합니다." #: ../../standalone/drakgw_.c:211 #, c-format msgid "Interface %s (using module %s)" msgstr "인터페이스 %s (%s 모듈 사용)" #: ../../standalone/drakgw_.c:212 #, c-format msgid "Interface %s" msgstr "인터페이스 %s" #: ../../standalone/drakgw_.c:220 msgid "No network adapter on your system!" msgstr "네트웍 어댑터를 찾을 수 없습니다!" #: ../../standalone/drakgw_.c:221 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "어떠한 네트웍 어댑터도 발견되지 않습니다. 하드웨어 설정 도구를 실행해 보세요." #: ../../standalone/drakgw_.c:227 msgid "Network interface" msgstr "네트웍 인터페이스" #: ../../standalone/drakgw_.c:228 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "시스템에 오직 하나의 설정된 네트웍 어댑터가 있습니다:\n" "\n" "%s\n" "\n" "그 어댑터로 지역 네트웍을 설정할 것입니다." #: ../../standalone/drakgw_.c:235 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "어느 네트웍 어댑터가 지역 네트웍으로 연결될 것인지 선택하세요." #: ../../standalone/drakgw_.c:261 msgid "Network interface already configured" msgstr "네트웍 인터페이스는 이미 설정되어 있습니다." #: ../../standalone/drakgw_.c:262 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../standalone/drakgw_.c:267 msgid "Automatic reconfiguration" msgstr "자동 재설정" #: ../../standalone/drakgw_.c:267 msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw_.c:268 msgid "Show current interface configuration" msgstr "현재 인터페이스 설정 보기" #: ../../standalone/drakgw_.c:269 #, fuzzy msgid "Current interface configuration" msgstr "현재 인터페이스 설정 보기" #: ../../standalone/drakgw_.c:270 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../standalone/drakgw_.c:283 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:290 #, fuzzy msgid "Local Network adress" msgstr "C 클래스 지역 네트웍" #: ../../standalone/drakgw_.c:294 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:300 msgid "(This) DHCP Server IP" msgstr "DHCP 서버 IP" #: ../../standalone/drakgw_.c:301 #, fuzzy msgid "The DNS Server IP" msgstr "DHCP 서버 IP" #: ../../standalone/drakgw_.c:302 #, fuzzy msgid "The internal domain name" msgstr "새 프린터 이름" #: ../../standalone/drakgw_.c:303 msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw_.c:304 msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw_.c:305 msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:306 msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:307 msgid "Re-configure interface and DHCP server" msgstr "인터페이스와 DHCP 서버 재설정" #: ../../standalone/drakgw_.c:314 msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../standalone/drakgw_.c:325 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "현재 설정 %s에서 잠재적인 랜 주소 충돌이 발견됩니다!\n" #: ../../standalone/drakgw_.c:335 msgid "Configuring..." msgstr "설정 중..." #: ../../standalone/drakgw_.c:336 msgid "Configuring scripts, installing software, starting servers..." msgstr "스크립트 설정 중, 소프트웨어 설치 중, 서버 시작 중..." #: ../../standalone/drakgw_.c:372 #, c-format msgid "Problems installing package %s" msgstr "팩키지 설치중 문제 발생 %s" #: ../../standalone/drakgw_.c:505 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "모든 것이 설정되었습니다.\n" "이제 자동 네트웍 설정기능(DHCP)으로 지역 네트워상의 다른 컴퓨터와 인터넷 연" "결 공유를 할 수 있습니다." #: ../../standalone/drakgw_.c:523 msgid "The setup has already been done, but it's currently disabled." msgstr "설정은 이미 완료되었지만, 현재 해제된 상태입니다." #: ../../standalone/drakgw_.c:524 msgid "The setup has already been done, and it's currently enabled." msgstr "설정이 이미 완료되었으며, 현재 허용된 상태입니다." #: ../../standalone/drakgw_.c:525 msgid "No Internet Connection Sharing has ever been configured." msgstr "어떠한 인터넷 연결 공유도 설정된 적이 없습니다." #: ../../standalone/drakgw_.c:531 msgid "Internet connection sharing configuration" msgstr "인터넷 연결공유 설정" #: ../../standalone/drakgw_.c:539 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "인터넷 연결공유 유틸리티에 잘 오셨습니다!\n" "\n" "%s\n" "\n" "마법사를 실행하려면 「설정」을 누르세요." #: ../../standalone/drakperm_.c:36 msgid "group" msgstr "그룹" #: ../../standalone/drakperm_.c:36 msgid "path" msgstr "경로" #: ../../standalone/drakperm_.c:36 msgid "permissions" msgstr "허가권" #: ../../standalone/drakperm_.c:36 msgid "user" msgstr "사용자" #: ../../standalone/drakperm_.c:43 msgid "Up" msgstr "위로" #: ../../standalone/drakperm_.c:44 msgid "delete" msgstr "삭제" #: ../../standalone/drakperm_.c:45 msgid "edit" msgstr "편집" #: ../../standalone/drakperm_.c:46 msgid "Down" msgstr "아래로" #: ../../standalone/drakperm_.c:47 msgid "add a rule" msgstr "규칙 추가" #: ../../standalone/drakperm_.c:48 msgid "select perm file to see/edit" msgstr "" #: ../../standalone/drakperm_.c:51 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../standalone/drakperm_.c:56 msgid "Add a new rule at the end" msgstr "새 규칙 끝에 추가" #: ../../standalone/drakperm_.c:57 msgid "Edit curent rule" msgstr "현재 규칙 편집" #: ../../standalone/drakperm_.c:58 msgid "Up selected rule one level" msgstr "선택된 규칙 한 단계 위로" #: ../../standalone/drakperm_.c:59 msgid "Down selected rule one level" msgstr "선택된 규칙 한 단계 아래로" #: ../../standalone/drakperm_.c:60 msgid "Delete selected rule" msgstr "선택된 규칙 삭제" #: ../../standalone/drakperm_.c:224 msgid "browse" msgstr "찾아보기" #: ../../standalone/drakperm_.c:231 msgid "Current user" msgstr "현재 사용자" #: ../../standalone/drakperm_.c:236 msgid "Permissions" msgstr "허가권" #: ../../standalone/drakperm_.c:237 msgid "Path" msgstr "경로" #: ../../standalone/drakperm_.c:238 msgid "Property" msgstr "속성" #: ../../standalone/drakperm_.c:240 msgid "sticky-bit" msgstr "스티키 비트" #: ../../standalone/drakperm_.c:241 msgid "Set-UID" msgstr "UID 설정" #: ../../standalone/drakperm_.c:242 msgid "Set-GID" msgstr "GID 설정" #: ../../standalone/drakperm_.c:296 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../standalone/drakperm_.c:297 msgid "Use owner id for execution" msgstr "실행시 소유자 아이디 사용" #: ../../standalone/drakperm_.c:298 msgid "Use group id for execution" msgstr "실행시 그룹 아이디 사용" #: ../../standalone/drakperm_.c:299 msgid "when checked, owner and group won't be changed" msgstr "" #: ../../standalone/drakperm_.c:304 msgid "Path selection" msgstr "경로 선택" #: ../../standalone/drakperm_.c:350 msgid "user :" msgstr "사용자:" #: ../../standalone/drakperm_.c:352 msgid "group :" msgstr "그룹:" #: ../../standalone/draksound_.c:46 msgid "No Sound Card detected!" msgstr "사운드카드를 찾을 수 없습니다!" #: ../../standalone/draksound_.c:47 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/draksound_.c:54 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksplash_.c:21 msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../standalone/draksplash_.c:67 msgid "first step creation" msgstr "첫 단계 생성" #: ../../standalone/draksplash_.c:70 msgid "final resolution" msgstr "최종 해상도" #: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163 msgid "choose image file" msgstr "이미지 파일 선택" #: ../../standalone/draksplash_.c:72 msgid "Theme name" msgstr "테마 이름" #: ../../standalone/draksplash_.c:77 msgid "Browse" msgstr "찾아보기" #: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153 msgid "Configure bootsplash picture" msgstr "부트스플래쉬 그림 설정" #: ../../standalone/draksplash_.c:90 msgid "" "x coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:91 msgid "" "y coordinate of text box\n" "in number of character" msgstr "" #: ../../standalone/draksplash_.c:92 msgid "text width" msgstr "" #: ../../standalone/draksplash_.c:93 msgid "text box height" msgstr "" #: ../../standalone/draksplash_.c:94 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:95 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/draksplash_.c:96 msgid "the width of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:97 msgid "the heigth of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:98 msgid "the color of the progress bar" msgstr "" #: ../../standalone/draksplash_.c:113 msgid "Preview" msgstr "미리보기" #: ../../standalone/draksplash_.c:115 msgid "Save theme" msgstr "테마 저장" #: ../../standalone/draksplash_.c:116 msgid "Choose color" msgstr "색상 선택" #: ../../standalone/draksplash_.c:119 msgid "Display logo on Console" msgstr "콘솔하상에 로고 보이기" #: ../../standalone/draksplash_.c:120 msgid "Make kernel message quiet by default" msgstr "" #: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "" #: ../../standalone/draksplash_.c:205 msgid "saving Bootsplash theme..." msgstr "" #: ../../standalone/draksplash_.c:428 msgid "ProgressBar color selection" msgstr "진행막대 색상 선택" #: ../../standalone/draksplash_.c:449 msgid "You must choose an image file first!" msgstr "먼저 이미지 파일을 선택해야 합니다!" #: ../../standalone/draksplash_.c:458 msgid "Generating preview ..." msgstr "미리보기 생성 중 ..." #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:506 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakxtv_.c:46 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" #: ../../standalone/drakxtv_.c:63 msgid "Canada (cable)" msgstr "캐나다 (케이블)" #: ../../standalone/drakxtv_.c:63 msgid "USA (broadcast)" msgstr "미국 (공중파)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable)" msgstr "미국 (케이블)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable-hrc)" msgstr "미국 (케이블-HRC)" #: ../../standalone/drakxtv_.c:64 msgid "China (broadcast)" msgstr "중국 (공중파)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (broadcast)" msgstr "일본 (공중파)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (cable)" msgstr "일본 (케이블)" #: ../../standalone/drakxtv_.c:65 msgid "East Europe" msgstr "동유럽" #: ../../standalone/drakxtv_.c:65 msgid "France [SECAM]" msgstr "프랑스 [SECAM]" #: ../../standalone/drakxtv_.c:65 msgid "Ireland" msgstr "아일랜드" #: ../../standalone/drakxtv_.c:65 msgid "West Europe" msgstr "서유럽" #: ../../standalone/drakxtv_.c:66 msgid "Australia" msgstr "오스트레일리아" #: ../../standalone/drakxtv_.c:66 msgid "Newzealand" msgstr "뉴질랜드" #: ../../standalone/drakxtv_.c:67 msgid "South Africa" msgstr "남아프리카" #: ../../standalone/drakxtv_.c:68 msgid "Argentina" msgstr "아르헨티나" #: ../../standalone/drakxtv_.c:69 msgid "Australian Optus cable TV" msgstr "" #: ../../standalone/drakxtv_.c:102 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "TV 노옴과 국가를\n" "입력하세요." #: ../../standalone/drakxtv_.c:104 msgid "TV norm:" msgstr "TV 놈 :" #: ../../standalone/drakxtv_.c:105 msgid "Area:" msgstr "지역 :" #: ../../standalone/drakxtv_.c:109 msgid "Scanning for TV channels in progress ..." msgstr "TV 채널 검색 진행 중..." #: ../../standalone/drakxtv_.c:116 msgid "Scanning for TV channels" msgstr "TV 채널 검색 중..." #: ../../standalone/drakxtv_.c:120 msgid "There was an error while scanning for TV channels" msgstr "TV 채널을 찾는 과정에서 오류가 있었습니다." #: ../../standalone/drakxtv_.c:121 msgid "XawTV isn't installed!" msgstr "XawTV가 설치되지 않았습니다!" #: ../../standalone/drakxtv_.c:124 msgid "Have a nice day!" msgstr "즐거운 하루를!" #: ../../standalone/drakxtv_.c:125 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "이제 [xawtv]를 (X윈도우 하에서) 사용할 수 있습니다!\n" #: ../../standalone/drakxtv_.c:147 msgid "No TV Card detected!" msgstr "TV 카드를 찾을 수 없습니다!" #: ../../standalone/drakxtv_.c:148 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/harddrake2_.c:17 msgid "Alternative drivers" msgstr "대체 드라이버들" #: ../../standalone/harddrake2_.c:18 msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/harddrake2_.c:20 msgid "Bus" msgstr "버스" #: ../../standalone/harddrake2_.c:21 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../standalone/harddrake2_.c:22 msgid "Channel" msgstr "채널" #: ../../standalone/harddrake2_.c:22 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI 채널" #: ../../standalone/harddrake2_.c:23 msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2_.c:23 msgid "" "The GNU/Linux kernel needs to do run a calculation loop at boot time\n" "\t to initialize a timer counter. Its result is stored as bogomips as a way " "to \"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2_.c:26 msgid "Bus identification" msgstr "버스 아이디" #: ../../standalone/harddrake2_.c:27 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "" #: ../../standalone/harddrake2_.c:29 msgid "Location on the bus" msgstr "버스상의 위치" #: ../../standalone/harddrake2_.c:30 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../standalone/harddrake2_.c:33 #, fuzzy msgid "Cache size" msgstr "크기" #: ../../standalone/harddrake2_.c:33 msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Coma bug:" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Does this cpu has Cyrix 6x86 Coma bug ?" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2_.c:36 #, fuzzy msgid "Cpuid level" msgstr "보안 수준" #: ../../standalone/harddrake2_.c:36 msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "" "The cpu frequency in Mhz (Mega herz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2_.c:38 #, fuzzy msgid "This field describes the device" msgstr "이 필드는 장치를 설명합니다." #: ../../standalone/harddrake2_.c:39 msgid "Old device file" msgstr "오래된 장치 파일" #: ../../standalone/harddrake2_.c:40 msgid "old static device name used in dev package" msgstr "" #: ../../standalone/harddrake2_.c:41 msgid "New devfs device" msgstr "새로운 devfs 장치" #: ../../standalone/harddrake2_.c:42 msgid "new dinamic device name generated by incore kernel devfs" msgstr "" #: ../../standalone/harddrake2_.c:43 msgid "Module" msgstr "모듈" #: ../../standalone/harddrake2_.c:43 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "" #: ../../standalone/harddrake2_.c:44 msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2_.c:44 msgid "Flags" msgstr "" #: ../../standalone/harddrake2_.c:45 msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2_.c:46 msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the attended precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "Does FPU have an irq vector" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "Early pentium were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2_.c:52 msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2_.c:53 msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2_.c:55 #, fuzzy msgid "Floppy format" msgstr "포맷" #: ../../standalone/harddrake2_.c:55 msgid "Format of floppies the drive accept" msgstr "" #: ../../standalone/harddrake2_.c:56 #, fuzzy msgid "Level" msgstr "레벨" #: ../../standalone/harddrake2_.c:56 msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2_.c:57 msgid "Media class" msgstr "매체 범주" #: ../../standalone/harddrake2_.c:57 msgid "class of hardware device" msgstr "하드웨어 장치 범주" #: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59 msgid "Model" msgstr "모델" #: ../../standalone/harddrake2_.c:58 msgid "hard disk model" msgstr "하드 디스크 모델" #: ../../standalone/harddrake2_.c:59 msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Model name" msgstr "모듈 이름" #: ../../standalone/harddrake2_.c:60 msgid "Official vendor name of the cpu" msgstr "" #: ../../standalone/harddrake2_.c:61 msgid "Number of buttons" msgstr "버튼 수" #: ../../standalone/harddrake2_.c:62 #, fuzzy msgid "Name" msgstr "이름:" #: ../../standalone/harddrake2_.c:63 #, fuzzy msgid "network printer port" msgstr "네트웍 프린터 (소켓)" #: ../../standalone/harddrake2_.c:64 msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2_.c:64 msgid "the number of the processor" msgstr "" #: ../../standalone/harddrake2_.c:65 #, fuzzy msgid "Model stepping" msgstr "설정 읽기" #: ../../standalone/harddrake2_.c:65 msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2_.c:66 #, fuzzy msgid "The type of bus on which the mouse is connected" msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?" #: ../../standalone/harddrake2_.c:67 msgid "the vendor name of the device" msgstr "" #: ../../standalone/harddrake2_.c:68 msgid "the vendor name of the processor" msgstr "" #: ../../standalone/harddrake2_.c:82 msgid "/_Quit" msgstr "/종료(_Q)" #: ../../standalone/harddrake2_.c:83 #, fuzzy msgid "/Autodetect _printers" msgstr "자동 검색됨" #: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85 #: ../../standalone/logdrake_.c:81 msgid "/_Options" msgstr "/옵션(_O)" #: ../../standalone/harddrake2_.c:85 #, fuzzy msgid "/Autodetect _modems" msgstr "자동 검색됨" #: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89 #: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102 #: ../../standalone/logdrake_.c:83 msgid "/_Help" msgstr "/도움말(_H)" #: ../../standalone/harddrake2_.c:89 msgid "/_Help..." msgstr "/도움말(_H)..." #: ../../standalone/harddrake2_.c:92 msgid "Harddrake help" msgstr "하드 드레이크 도움말" #: ../../standalone/harddrake2_.c:93 msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/harddrake2_.c:96 msgid "" "Once you've selected a device, you'll be able to see explanations on fields " "displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2_.c:96 #, fuzzy msgid "Select a device !" msgstr "스캐너 선택" #: ../../standalone/harddrake2_.c:100 msgid "/_Report Bug" msgstr "/버그 보고(_R)" #: ../../standalone/harddrake2_.c:102 msgid "/_About..." msgstr "/정보(_A)..." #: ../../standalone/harddrake2_.c:104 msgid "About Harddrake" msgstr "하드 드레이크 정보" #: ../../standalone/harddrake2_.c:105 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../standalone/harddrake2_.c:106 msgid "Author:" msgstr "제작자:" #: ../../standalone/harddrake2_.c:113 msgid "Detection in progress" msgstr "검색 진행 중" #: ../../standalone/harddrake2_.c:119 msgid "Harddrake2 version " msgstr "하드 드레이크 2 버전" #: ../../standalone/harddrake2_.c:126 msgid "Detected hardware" msgstr "검색된 하드웨어" #: ../../standalone/harddrake2_.c:129 msgid "Information" msgstr "정보" #: ../../standalone/harddrake2_.c:131 msgid "Configure module" msgstr "모듈 설정" #: ../../standalone/harddrake2_.c:137 msgid "Run config tool" msgstr "설정 도구 실행" #: ../../standalone/harddrake2_.c:143 #, c-format msgid "Running \"%s\" ..." msgstr "「%s」 실행 중..." #: ../../standalone/harddrake2_.c:159 msgid "" "Click on a device in the left tree in order to get its information displayed " "here." msgstr "" #: ../../standalone/harddrake2_.c:231 msgid "primary" msgstr "주" #: ../../standalone/harddrake2_.c:231 msgid "secondary" msgstr "두번째" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect modems" msgstr "자동 검색됨" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect printers" msgstr "자동 검색됨" #: ../../standalone/harddrake2_.c:261 #, fuzzy msgid "/Options" msgstr "/옵션(_O)" #: ../../standalone/keyboarddrake_.c:26 msgid "Please, choose your keyboard layout." msgstr "키보드 레이아웃 선택" #: ../../standalone/keyboarddrake_.c:35 msgid "Do you want the BackSpace to return Delete in console?" msgstr "콘솔에서 백스페이스 키가 지우기를 하도록 하시겠습니까?" #: ../../standalone/livedrake_.c:18 msgid "Change Cd-Rom" msgstr "CDROM 바꾸기" #: ../../standalone/livedrake_.c:19 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "설치 CD-ROM을 넣은 후에 「확인」을 누르세요.\n" "CD-ROM이 없다면, 「취소」를 라이브 업그레이드를 취소하세요." #: ../../standalone/livedrake_.c:29 msgid "Unable to start live upgrade !!!\n" msgstr "라이브 업그레이드를 시작할 수 없습니다!!! \n" #: ../../standalone/localedrake_.c:34 msgid "The change is done, but to be effective you must logout" msgstr "변경이 완료 되었지만, 적용되기 위해서는 재로그인해야 합니다." #: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350 msgid "logdrake" msgstr "로그드레이크" #: ../../standalone/logdrake_.c:68 msgid "Show only for the selected day" msgstr "선택된 날짜에 대해만 보이기" #: ../../standalone/logdrake_.c:75 msgid "/File/_New" msgstr "/파일(F)/새로 만들기(_N)" #: ../../standalone/logdrake_.c:75 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:76 msgid "/File/_Open" msgstr "/파일(F)/열기(_O)" #: ../../standalone/logdrake_.c:76 msgid "O" msgstr "O" #: ../../standalone/logdrake_.c:77 msgid "/File/_Save" msgstr "/파일(F)/저장(_S)" #: ../../standalone/logdrake_.c:77 msgid "S" msgstr "S" #: ../../standalone/logdrake_.c:78 msgid "/File/Save _As" msgstr "/파일(F)/다른 이름으로 저장(_A)" #: ../../standalone/logdrake_.c:79 msgid "/File/-" msgstr "/파일(F)/-" #: ../../standalone/logdrake_.c:82 msgid "/Options/Test" msgstr "옵션(O)/테스트" #: ../../standalone/logdrake_.c:84 msgid "/Help/_About..." msgstr "/도움말(H)/이 프로그램은(_A)..." #: ../../standalone/logdrake_.c:145 msgid "User" msgstr "사용자" #: ../../standalone/logdrake_.c:146 msgid "Messages" msgstr "메시지" #: ../../standalone/logdrake_.c:147 msgid "Syslog" msgstr "시스템 로그" #: ../../standalone/logdrake_.c:148 msgid "Mandrake Tools Explanations" msgstr "맨드레이크 도구 설명" #: ../../standalone/logdrake_.c:151 msgid "search" msgstr "검색" #: ../../standalone/logdrake_.c:161 msgid "A tool to monitor your logs" msgstr "로그 분석 도구" #: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91 msgid "Settings" msgstr "설정값" #: ../../standalone/logdrake_.c:167 msgid "matching" msgstr "찾을 문자열" #: ../../standalone/logdrake_.c:168 msgid "but not matching" msgstr "제외할 문자열" #: ../../standalone/logdrake_.c:172 msgid "Choose file" msgstr "파일 선택" #: ../../standalone/logdrake_.c:181 msgid "Calendar" msgstr "달력" #: ../../standalone/logdrake_.c:191 msgid "Content of the file" msgstr "파일 내용" #: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375 msgid "Mail alert" msgstr "메일 경고" #: ../../standalone/logdrake_.c:245 #, c-format msgid "please wait, parsing file: %s" msgstr "기다려 주세요. 파일 분석 중: %s" #: ../../standalone/logdrake_.c:392 msgid "Mail alert configuration" msgstr "메일 경고 설정" #: ../../standalone/logdrake_.c:393 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "메일 설정 도구에 잘 오셨습니다.\n" "\n" "여기서 경고 시스템을 설정할 수 있습니다.\n" #: ../../standalone/logdrake_.c:400 msgid "Apache World Wide Web Server" msgstr "아파치 월드와이드웹 서버" #: ../../standalone/logdrake_.c:401 msgid "Domain Name Resolver" msgstr "도메인 네임 해결사" #: ../../standalone/logdrake_.c:402 msgid "Ftp Server" msgstr "FTP 서버" #: ../../standalone/logdrake_.c:403 msgid "Postfix Mail Server" msgstr "포스트픽스 메일 서버" #: ../../standalone/logdrake_.c:404 msgid "Samba Server" msgstr "삼바 서비스" #: ../../standalone/logdrake_.c:405 msgid "SSH Server" msgstr "SSH 서비스" #: ../../standalone/logdrake_.c:406 msgid "Webmin Service" msgstr "웹민 서비스" #: ../../standalone/logdrake_.c:407 msgid "Xinetd Service" msgstr "Xinetd 서비스" #: ../../standalone/logdrake_.c:414 msgid "service setting" msgstr "서비스 설정" #: ../../standalone/logdrake_.c:415 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "" #: ../../standalone/logdrake_.c:428 msgid "load setting" msgstr "설정 읽기" #: ../../standalone/logdrake_.c:429 msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/logdrake_.c:444 msgid "alert configuration" msgstr "경고 설정" #: ../../standalone/logdrake_.c:445 msgid "Please enter your email address below " msgstr "아래에 이메일 주소를 입력하세요." #: ../../standalone/logdrake_.c:486 msgid "Save as.." msgstr "새 이름으로 저장" #: ../../standalone/mousedrake_.c:37 msgid "Please, choose the type of your mouse." msgstr "어떤 종류의 마우스를 사용하십니까?" #: ../../standalone/mousedrake_.c:50 msgid "Emulate third button?" msgstr "3버튼 에뮬레이트?" #: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87 #, fuzzy msgid "Network Monitoring" msgstr "네트웍 환경 설정" #: ../../standalone/net_monitor_.c:96 #, fuzzy msgid "Profile " msgstr "프로파일: " #: ../../standalone/net_monitor_.c:99 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:103 #, fuzzy msgid "Sending Speed:" msgstr "파일 전송 중 ..." #: ../../standalone/net_monitor_.c:104 msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor_.c:106 #, fuzzy msgid "Connection Time: " msgstr "연결 유형: " #: ../../standalone/net_monitor_.c:113 msgid "Logs" msgstr "" #: ../../standalone/net_monitor_.c:147 #, fuzzy msgid "Wait please, testing your connection..." msgstr "연결 테스트 중..." #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Connecting to Internet " msgstr "인터넷에 연결" #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Disconnecting from Internet " msgstr "인터넷에 연결" #: ../../standalone/net_monitor_.c:222 msgid "Disconnection from Internet failed." msgstr "" #: ../../standalone/net_monitor_.c:223 msgid "Disconnection from Internet complete." msgstr "" #: ../../standalone/net_monitor_.c:225 #, fuzzy msgid "Connection complete." msgstr "연결 속도" #: ../../standalone/net_monitor_.c:226 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:330 #, fuzzy msgid "Color configuration" msgstr "경고 설정" #: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:397 msgid "average" msgstr "" #: ../../standalone/net_monitor_.c:400 #, fuzzy msgid "Local measure" msgstr "지역 파일들" #: ../../standalone/net_monitor_.c:432 msgid "transmitted" msgstr "" #: ../../standalone/net_monitor_.c:433 msgid "received" msgstr "" #: ../../standalone/net_monitor_.c:453 msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Connect %s" msgstr "연결" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Disconnect %s" msgstr "연결 끊기" #: ../../standalone/printerdrake_.c:47 msgid "Reading printer data ..." msgstr "프린터 데이터 읽는 중 ..." #: ../../standalone/scannerdrake_.c:39 msgid "Detecting devices ..." msgstr "장치 검색 중 ..." #: ../../standalone/scannerdrake_.c:39 msgid "Test ports" msgstr "포트 검사" #: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66 #: ../../standalone/scannerdrake_.c:79 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/scannerdrake_.c:54 #, c-format msgid "%s found on %s, configure it?" msgstr "%s이 %s에서 발견되었습니다. 설정하시겠습니까?" #: ../../standalone/scannerdrake_.c:57 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../standalone/scannerdrake_.c:63 msgid "Select a scanner" msgstr "스캐너 선택" #: ../../standalone/scannerdrake_.c:91 #, c-format msgid "This %s scanner is unsupported" msgstr "이 스캐너 [%s]는 지원되지 않습니다." #: ../../standalone/scannerdrake_.c:105 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" #: ../../standalone/scannerdrake_.c:107 msgid "choose device" msgstr "장치 선택" #: ../../standalone/scannerdrake_.c:113 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../standalone/scannerdrake_.c:118 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../standalone/service_harddrake_.c:48 msgid "Some devices were added:\n" msgstr "" #: ../../standalone/service_harddrake_.c:64 #, fuzzy msgid "Hardware probing in progress" msgstr "검색 진행 중" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "언어 선택" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "설치 클래스 선택" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "하드 디스크 선택" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "마우스 설정" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "키보드 선택" #: ../../steps.pm_.c:19 msgid "Security" msgstr "보안" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "파일시스템 준비" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "파티션 포맷" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "설치 팩키지 선택" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "시스템 설치" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "사용자 추가" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "네트웍 설정" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "서비스 설정" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "부트로더 설치" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "부트디스크 제작" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "X 설정" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "시스템 업데이트 설치" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "설치 종료" #: ../../ugtk.pm_.c:636 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" "-adobe-helvetica-bold-r-normal--16-*-75-75-p-*-iso8859-1,-*-gulim-bold-r-" "normal--16-*-75-75-*-*-ksc5601.1987-0,*-r-*" #: ../../ugtk2.pm_.c:711 msgid "utopia 25" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "웹/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "네트웍 컴퓨터 (클라이언트)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS 서버, 삼바 서버, 프락시 서버, SSH 서버" #: ../../share/compssUsers:999 msgid "Office" msgstr "오피스" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "GNOME 워크스테이션" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Palm pilot 또는 Visor용 도구들" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "워크스테이션" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "방화벽/라우터" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "도메인 네임 및 네트웍 정보 서버" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "오피스 프로그램들: 워드프로세서 (kword, abiword), 스프레드쉬트 (kspread," "gnumeric), pdf 뷰어, 등등" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "오디오 관련 도구; mp3/midi 플레이어, 믹서, 등등" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "리눅스 표준 기반. 외부 애플리케이션 지원" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "리눅스 및 자유 소프트웨어에 대한 서적과 Howto문서" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE 워크스테이션" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, 윈도우 메이커, 인라이튼먼트, Fvwm, 등등" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "멀티미디어 - 비디오" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "메일, 뉴스, 웹, 파일전송, 채팅용 도구모음" #: ../../share/compssUsers:999 msgid "Database" msgstr "데이터베이스" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL 또는 MySQL 데이터베이스 서버" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "쉬운 컴퓨터 설정을 위한 도구" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "멀티미디어 - 사운드" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "문서" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "콘솔 도구" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "postfix 메일 서버, Inn 뉴스 서버" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "인터넷 스테이션" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "멀티미디어 스테이션" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "설정" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "추가 그래픽 데스크탑 (Gnome, IceWM)" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "K Desktop 환경, 여러가지 도구를 수반한 기본 그래픽 환경" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "그래픽 환경" #: ../../share/compssUsers:999 msgid "Development" msgstr "개발" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "아파치와 프로FTPD" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "CD 제작 및 굽기 도구" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "오피스 워크스테이션" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "그놈, Icewm, 윈도우 메이커, 인라이튼먼트, Fvwm, 등등" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "GIMP 같은 그래픽 프로그램" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C/C++ 개발 라이브러리, 프로그램 및 헤더파일" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "네트웍 컴퓨터 서버" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "메일/그룹웨어/뉴스" #: ../../share/compssUsers:999 msgid "Game station" msgstr "게임 스테이션" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "비디오 플레이어 및 에디터" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "멀티미디어 - 그래픽" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "장난감 프로그램: arcade, boards, strategy, 등등" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "메일/뉴스를 일고 보내며 웹검색을 위한 도구모음(pine, mutt, tin...)" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "개인 금융" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "사용자 친화적 프로그램과 데스크탑 도구를 가진 그래픽 환경" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "SSH 및 다른 프로토콜의 클라이언트" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "인터넷 게이트웨이" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "사운드 및 비디오 연주/편집 프로그램" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "기타 그래픽 데스크탑" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "에디터, 쉘, 파일도구, 터미널" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "gnucash 같은 자금관리 프로그램" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "개인 정보관리" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "멀티미디어 - CD 굽기" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "과학 워크스테이션" #~ msgid "can not open /etc/inittab for reading: %s" #~ msgstr "「/etc/inittab」파일을 읽을 수 없습니다: %s" #, fuzzy #~ msgid "cpu number " #~ msgstr "번호" #~ msgid "Proxy configuration" #~ msgstr "프락시 설정" #~ msgid "" #~ "Welcome to the proxy configuration utility.\n" #~ "\n" #~ "Here, you'll be able to set up your http and ftp proxies\n" #~ "with or without login and password\n" #~ msgstr "" #~ "프락시 설정 도구에 잘 오셨습니다.\n" #~ "\n" #~ "여기서 로그인과 비밀번호를 필요 또는 필요로하지 않는\n" #~ "HTTP와 FTP 프락시를 설정할 수 있습니다.\n" #~ msgid "" #~ "Please fill in the http proxy informations\n" #~ "Leave it blank if you don't want an http proxy" #~ msgstr "" #~ "HTTP 프락시 정보를 입력하세요.\n" #~ "HTTP 프락시가 필요 없다면, 공란으로 두세요." #~ msgid "URL" #~ msgstr "주소" #~ msgid "port" #~ msgstr "포트" #~ msgid "Url should begin with 'http:'" #~ msgstr "주소는 「http:」로 시작해야 합니다." #~ msgid "The port part should be numeric" #~ msgstr "포트 부분은 숫자이어야 합니다." #~ msgid "" #~ "Please fill in the ftp proxy informations\n" #~ "Leave it blank if you don't want an ftp proxy" #~ msgstr "" #~ "FTP 프락시 정보를 입력하세요.\n" #~ "FTP 프락시가 필요없다면, 공란으로 두세요." #~ msgid "" #~ "Please enter proxy login and password, if any.\n" #~ "Leave it blank if you don't want login/passwd" #~ msgstr "" #~ "프락시 로그인과 비밀번호를 입력하세요.\n" #~ "로그인과 비밀번호가 필요치 않다면, 공란으로 두세요." #~ msgid "login" #~ msgstr "로그인" #~ msgid "password" #~ msgstr "비밀번호" #~ msgid "re-type password" #~ msgstr "비밀번호 확인" #~ msgid "The passwords don't match. Try again!" #~ msgstr "비밀번호가 일치하지 않습니다. 다시 입력하세요!" #~ msgid "Can't write file %s" #~ msgstr "%s 파일에 쓸 수 없습니다." #~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "" #~ "-adobe-helvetica-medium-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-medium-r-" #~ "normal--*-120-75-75-*-*-ksc5601.1987-0,*-r-*" #~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "" #~ "-adobe-helvetica-bold-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-bold-r-" #~ "normal--*-120-75-75-*-*-ksc5601.1987-0,*-r-*" #~ msgid "no help implemented yet.\n" #~ msgstr "아직 도움말이 준비되지 않았습니다.\n" #~ msgid "Please click on a medium" #~ msgstr "매체를 클릭하세요." #~ msgid "Removing LPRng..." #~ msgstr "LPRng 제거 중 ..." #~ msgid "Removing LPD..." #~ msgstr "LPD 제거 중 ..." #~ msgid "usage: drakfloppy\n" #~ msgstr "사용법: drakfloppy\n" #~ msgid "" #~ "\n" #~ "Usage: harddrake [-h|--help] [--test]\n" #~ msgstr "" #~ "\n" #~ "사용법: harddrake [-h|--help] [--test]\n" #~ msgid "usage: keyboarddrake [--expert] [keyboard]\n" #~ msgstr "사용법: keyboarddrake [--expert] [키보드]\n" #~ msgid "detected on interface %s" #~ msgstr "인터페이스 %s상에서 발견" #~ msgid "unable to backup lilo message" #~ msgstr "릴로 메시지를 백업할 수 없습니다." #~ msgid "can't change lilo message" #~ msgstr "릴로 메시지를 변경할 수 없습니다."