# translation of DrakX.po to Icelandic # translation of DrakX-is.po to Icelandic # Translation file for Mandrake graphic install, DrakX # Copyright (C) 1999,2003, 2005 Free Software Foundation, Inc. # Copyright (C) 1999 Mandrakesoft # Jóhann Þorvarðarson , 1999-2000. # Þórarinn (Tony) R. Einarsson , 1999-2000. # Pjetur G. Hjaltason , 2003, 2005. # # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2005-02-24 14:10+0100\n" "PO-Revision-Date: 2005-03-01 00:03+0000\n" "Last-Translator: Pjetur G. Hjaltason \n" "Language-Team: Icelandic \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.3\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "Hvaða USB lykil vilt þú forsníða?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "Þú ert að fara að forsníða USB tæki \"%s\". Öllum gögnum á tækinu verður " "eytt.\n" "Vertu viss um að valið tæki sé sá USB lykill sem þú vilt forsníða.\n" "Við ráðleggjum þér að taka alla aðra USB geymslumiðla úr sambandi á meðanþú " "keyrir þessa aðgerð." #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "Ekki hægt að skrifa á lykil" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "USB lykillinn virðist vera með virka ritvörn. Vinsamlega taktu hann úr\n" "sambandi, fjarlægðu ritvörnina og tengdu lykilinn aftur." #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Reyna aftur" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "Halda áfram á USB lykils" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "USB lykillinn virðist vera með virka ritvörn, en við getum ekki aftengt\n" "hann með öryggi núna.\n" "\n" "\n" "Smelltu á hnappinn til að endurræsa vélina, aftengdu lykilinn, fjarlægðu\n" "ritvörnina, tengdu lykilin aftur og ræstu Mandrake Move aftur." #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317 #, c-format msgid "Reboot" msgstr "Endurræsa" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "USB lykillinn þinn inniheldur ekki neinar gildar Windows (FAT) disksneiðar.\n" "Þú þarft eina til að halda áfram (auk þess er það algengara svo þú munt " "geta\n" "flutt og nálgast skrár þínar frá öðrum vélum sem keyra Windows).\n" "Vinsamlega tengdu USB lykil sem inniheldur Windows disksneið í staðin.\n" "\n" "\n" "Þú getur einnig haldið áfram án USB lykils - þú getur samt notað\n" "Mandrake Move eins og venjulegt Mandrake stýrikerfi." #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "Við fundum engan USB lykil á kerfinu þínu. Ef þú tengir USB\n" "lykil núna, þá mun Mandrake Move vista gögnin þín á þínu\n" "heimasvæði auk kerfisuppsetninga, þær varðveitast þá þegar\n" "þú ræsir aftur á þessari tölvu, eða annari. Athugið: ef þú stingur\n" "inn lykli núna, bíddu þá í nokkrar sekúndur áður en þú reynir aftur.\n" "\n" "\n" "Þú getur einnig haldið áfram án USB lykils - þú getur samt notað\n" "Mandrake Move eins og venjulegt Mandrake stýrikerfi." #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "Þarf að hafa lykil til að geta vistað gögnin þín" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "Leita aftur að USB lykli" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "Setja upp USB lykil" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Augnablik, set upp kerfisstillingaskrár á USB lykilinn..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "Sláðu inn notandaupplýsingar, lykilorð verður notað fyrir skjásvæfu" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "Sjálfvirk uppsetning" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Augnablik, leita að og stilli tæki..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 #: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393 #: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541 #: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183 #: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82 #: install_steps_interactive.pm:38 interactive/http.pm:117 #: interactive/http.pm:118 network/netconnect.pm:1037 #: network/netconnect.pm:1041 network/netconnect.pm:1046 #: network/netconnect.pm:1072 network/netconnect.pm:1141 #: network/netconnect.pm:1145 network/netconnect.pm:1283 #: network/netconnect.pm:1288 network/netconnect.pm:1306 #: network/netconnect.pm:1491 printer/printerdrake.pm:238 #: printer/printerdrake.pm:245 printer/printerdrake.pm:270 #: printer/printerdrake.pm:416 printer/printerdrake.pm:421 #: printer/printerdrake.pm:434 printer/printerdrake.pm:444 #: printer/printerdrake.pm:508 printer/printerdrake.pm:635 #: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335 #: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416 #: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434 #: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605 #: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613 #: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719 #: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737 #: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852 #: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957 #: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984 #: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004 #: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159 #: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949 #: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501 #: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509 #: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205 #: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483 #: standalone/drakTermServ:392 standalone/drakTermServ:753 #: standalone/drakTermServ:760 standalone/drakTermServ:779 #: standalone/drakTermServ:998 standalone/drakTermServ:1478 #: standalone/drakTermServ:1483 standalone/drakTermServ:1490 #: standalone/drakTermServ:1502 standalone/drakTermServ:1523 #: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1127 standalone/drakbackup:1160 #: standalone/drakbackup:1671 standalone/drakbackup:1827 #: standalone/drakbackup:2421 standalone/drakbackup:4110 #: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124 #: standalone/drakconnect:649 standalone/drakconnect:652 #: standalone/drakconnect:671 standalone/drakfloppy:297 #: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209 #: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604 #: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107 #: standalone/finish-install:39 standalone/logdrake:169 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Villa" #: ../move/move.pm:605 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n" "Haltu áfram á eigin ábyrgð." #: ../move/move.pm:660 install_steps_interactive.pm:38 #, c-format msgid "An error occurred" msgstr "Villa kom upp" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "Villa kon upp:\n" "\n" "\n" "%s\n" "\n" "Þetta getur verið vegna gallaðra kerfisuppsetningarskráa\n" "á USB lyklinum, ef sú er raunin, reynið þá að fjarlægja þær og\n" "enduræsing Mandrake Move mun leysa málið. Til að gera\n" "það, smelltu á viðeigandi hnapp.\n" "\n" "\n" "Þú getur einnig enduræst og fjarlægt USB lykilinn, eða\n" "rannsakað innihald hans undir öðru stýrikerfi, eða litið\n" "fyrst á kerfisannála á sýndarskjám #3 og #4 til að reyna\n" "að sjá hvað er að gerast." #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "Fjarlægja kerfisstillingarskrár" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "Einfaldlega Endurræsa" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "Þú getur aðeins keyrt án stuðnings við geisladisk" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "Stöðva þessi forrit" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "Enginn CDROM stuðningur" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 #: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030 #: diskdrake/interactive.pm:1083 #, c-format msgid "Read carefully!" msgstr "Lestu vandlega!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "Þú getur ekki notað annann geisladisk þegar eftirfarandi forrit eru " "keyrandi: \n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "Afrita í minni til að leyfa að geisladiskur sé fjarlægður" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB eða meira" #: Xconfig/card.pm:159 #, c-format msgid "X server" msgstr "X miðlari" #: Xconfig/card.pm:160 #, c-format msgid "Choose an X server" msgstr "Veldu X miðlara" #: Xconfig/card.pm:192 #, c-format msgid "Multi-head configuration" msgstr "Fjölskjáa-uppsetning" #: Xconfig/card.pm:193 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Kerfið styður við marga skjái samtímis.\n" "Hvað viltu gera?" #: Xconfig/card.pm:262 #, c-format msgid "Can not install Xorg package: %s" msgstr "Get ekki sett inn Xorg pakkann: %s" #: Xconfig/card.pm:272 #, c-format msgid "Select the memory size of your graphics card" msgstr "Veldu minnisstærð skjákortsins" #: Xconfig/card.pm:349 #, c-format msgid "Xorg configuration" msgstr "Xorg uppsetning" #: Xconfig/card.pm:351 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Hvaða uppsetningu af Xorg viltu nota?" #: Xconfig/card.pm:384 #, c-format msgid "Configure all heads independently" msgstr "Stilla öll úttök sjálfstætt" #: Xconfig/card.pm:385 #, c-format msgid "Use Xinerama extension" msgstr "Nota Xinerama viðbætur" #: Xconfig/card.pm:390 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Stilla aðeins kort \"%s\"%s" #: Xconfig/card.pm:402 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:409 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s með þrívíddarhraðli" #: Xconfig/card.pm:411 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "Kortið þitt styður þrívíddarhröðun með Xorg %s." #: Xconfig/card.pm:417 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s með TILRAUNAÚTGÁFU af þrívíddarhröðun" #: Xconfig/card.pm:419 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Kortið þitt getur notað þrívíddarhröðun með Xorg %s,\n" "ATHUGIÐ AÐ ÞETTA ER TILRAUNAÚTGÁFA OG GETUR FRYST TÖLVUNA ÞÍNA." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914 #, c-format msgid "Custom" msgstr "Sérsniðið" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 printer/printerdrake.pm:737 #: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742 #: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Hætta" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "Skjákort" #: Xconfig/main.pm:120 Xconfig/monitor.pm:111 #, c-format msgid "Monitor" msgstr "Skjár" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221 #, c-format msgid "Resolution" msgstr "Upplausn" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "Prófa" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakfont:493 standalone/drakfont:555 #, c-format msgid "Options" msgstr "Valkostir" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "Xorg uppsetningarskráin þín er röng, hún verður hunsuð." #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Vista stillingar?\n" "núverandi stilling er:\n" "\n" "%s" #: Xconfig/monitor.pm:112 #, c-format msgid "Choose a monitor for head #%d" msgstr "Veldu skjá fyrir úttak #%d" #: Xconfig/monitor.pm:112 #, c-format msgid "Choose a monitor" msgstr "Veldu skjá" #: Xconfig/monitor.pm:118 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:119 mouse.pm:49 #, c-format msgid "Generic" msgstr "Almenn" #: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52 #: standalone/harddrake2:86 #, c-format msgid "Vendor" msgstr "Framleiðandi" #: Xconfig/monitor.pm:130 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Plug'n Play skönnun mistókst, vinsamlega veldu réttan skjá" #: Xconfig/monitor.pm:135 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n" "valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n" "eitthvað annað.\n" "\n" "það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n" "þú einhverjar efasemdir, veldu þá lægri stillingar." #: Xconfig/monitor.pm:142 #, c-format msgid "Horizontal refresh rate" msgstr "Lárétt tíðni" #: Xconfig/monitor.pm:143 #, c-format msgid "Vertical refresh rate" msgstr "Lóðrétt tíðni" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 litir (8 bits)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 þúsund litir (15 bits)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 þúsund litir (16 bits)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 miljón litir (24 bits)" #: Xconfig/resolution_and_depth.pm:133 #, c-format msgid "Resolutions" msgstr "Upplausnir" #: Xconfig/resolution_and_depth.pm:270 #, c-format msgid "Choose the resolution and the color depth" msgstr "Veldu upplausn og fjölda lita" #: Xconfig/resolution_and_depth.pm:271 #, c-format msgid "Graphics card: %s" msgstr "Skjákort: %s" #: Xconfig/resolution_and_depth.pm:285 interactive.pm:424 #: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:199 standalone/drakTermServ:490 #: standalone/drakbackup:3967 standalone/drakbackup:4027 #: standalone/drakbackup:4071 standalone/drakconnect:165 #: standalone/drakconnect:849 standalone/drakconnect:936 #: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388 #: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506 #: ugtk2.pm:900 ugtk2.pm:923 #, c-format msgid "Ok" msgstr "Í lagi" #: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422 #: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316 #: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3579 #: standalone/drakautoinst:217 standalone/drakbackup:3893 #: standalone/drakbackup:3897 standalone/drakbackup:3955 #: standalone/drakconnect:164 standalone/drakconnect:934 #: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745 #: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343 #: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900 #, c-format msgid "Cancel" msgstr "Hætta við" #: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153 #: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519 #: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284 #: standalone/drakbackup:3889 standalone/drakbug:104 #: standalone/drakconnect:160 standalone/drakconnect:245 #: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 #: ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "Hjálp" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Prófun á stillingum" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Viltu prófa stillingarnar?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Viðvörun: Prófun á þessu skjákorti gæti fryst tölvuna þína" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Villa kom upp:\n" "%s\n" "Reyndu að breyta einhverjum stillingum" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "Hætti eftir %d sekúndur" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "Er þetta rétt stilling?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Tegund lyklaborðs: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Tegund músar: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Mús: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Skjár: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Lárétt tíðni skjás: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Lóðrétt tíðni skjás: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Skjákort: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Skjákortsminni: %s kB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Litadýpt: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Upplausnir: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Xorg rekill: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Grafískt viðmót í ræsingu" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n" "Vilt þú kveikja á X við endurræsingu?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Skjákortið þitt virðist hafa sjónvarpstengi.\n" "Það er hægt stilla það til að nota skjáminni.\n" "\n" "Til að þetta sé hægt ættir þú að tengja skjákortið þitt við sjónvarp áðuren " "tölvan er ræst.\n" "Veldu síðan \"TVout\" færsluna í ræsistjóranum\n" "\n" "Viltu nota þennan möguleika?" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "Hvaða staðal notar sjónvarpið þitt?" #: Xconfig/xfree.pm:571 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462 #: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231 #: standalone/service_harddrake:204 #, c-format msgid "Please wait" msgstr "Augnablik..." #: any.pm:140 #, c-format msgid "Bootloader installation in progress" msgstr "Er að setja upp ræsistjóra" #: any.pm:151 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO vill setja nýtt diskauðkenni á disk %s. ATHUGIÐ að ef þú breytir\n" "diskauðkenni á Windows NT, 2000, eða XP \"ræsidisk\" þá veldur það\n" "alvarlegri Windows villu.\n" "Þetta á ekki við Windows 95 eða 98, eða NT gagnadiska.\n" "\n" "Breyta diskauðkenni?" #: any.pm:162 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Innsetning ræsiforrits brást sökum eftirfarandi villu:" #: any.pm:168 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: any.pm:206 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Þú ákvaðst að setja ræsiforritið á disksneið.\n" "Þetta gefur til kynna að þú hafir nú þegar ræsiforrit á harða disknum sem þú " "ræsir af (t.d. System Commander).\n" "\n" "Af hvaða disk ræsir þú?" #: any.pm:229 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Í ræsifærsluna (MBR)" #: any.pm:230 #, c-format msgid "First sector of the root partition" msgstr "Á fyrsta geira ræsidisksneiðar" #: any.pm:232 #, c-format msgid "On Floppy" msgstr "Á diskling" #: any.pm:234 help.pm:739 printer/printerdrake.pm:3962 #, c-format msgid "Skip" msgstr "Sleppa" #: any.pm:238 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub uppsetning" #: any.pm:239 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Hvert viltu setja ræsistjórann?" #: any.pm:264 standalone/drakboot:307 #, c-format msgid "Boot Style Configuration" msgstr "Uppsetning ræsistíls" #: any.pm:266 any.pm:298 #, c-format msgid "Bootloader main options" msgstr "Aðalvalmöguleikar ræsiforrits" #: any.pm:270 #, c-format msgid "Give the ram size in MB" msgstr "Sláðu inn vinnsluminni í MB" #: any.pm:272 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs" #: any.pm:273 any.pm:606 authentication.pm:176 #, c-format msgid "The passwords do not match" msgstr "Mismunandi lykilorð" #: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270 #, c-format msgid "Please try again" msgstr "Reyndu aftur" #: any.pm:278 any.pm:301 #, c-format msgid "Bootloader to use" msgstr "Ræsiforrit sem á að nota" #: any.pm:280 any.pm:303 #, c-format msgid "Boot device" msgstr "Ræsitæki" #: any.pm:282 #, c-format msgid "Delay before booting default image" msgstr "Töf áður en sjálfgefin ræsing byrjar" #: any.pm:283 #, c-format msgid "Enable ACPI" msgstr "Virkja ACPI" #: any.pm:285 #, c-format msgid "Force no APIC" msgstr "Þvinga ekki notkun á APIC" #: any.pm:287 #, c-format msgid "Force No Local APIC" msgstr "Þvinga engan staðbundinn APIC" #: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:633 printer/printerdrake.pm:1596 #: printer/printerdrake.pm:1716 standalone/drakbackup:1653 #: standalone/drakbackup:3495 standalone/drakups:295 #, c-format msgid "Password" msgstr "Lykilorð" #: any.pm:290 any.pm:634 authentication.pm:182 #, c-format msgid "Password (again)" msgstr "Lykilorð (aftur)" #: any.pm:291 #, c-format msgid "Restrict command line options" msgstr "Takmarka alla rofa á skipanlínu" #: any.pm:291 #, c-format msgid "restrict" msgstr "takmarka" #: any.pm:293 #, c-format msgid "Clean /tmp at each boot" msgstr "Hreinsa /tmp við hverja ræsingu" #: any.pm:294 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)" #: any.pm:302 #, c-format msgid "Init Message" msgstr "Init skilaboð" #: any.pm:304 #, c-format msgid "Open Firmware Delay" msgstr "" #: any.pm:305 #, c-format msgid "Kernel Boot Timeout" msgstr "Kjarni féll á tíma" #: any.pm:306 #, c-format msgid "Enable CD Boot?" msgstr "Virkja CD ræsingu?" #: any.pm:307 #, c-format msgid "Enable OF Boot?" msgstr "Virkja OF ræsingu?" #: any.pm:308 #, c-format msgid "Default OS?" msgstr "Sjálfgefið stýrikerfi?" #: any.pm:361 #, c-format msgid "Image" msgstr "Ræsikjarni" #: any.pm:362 any.pm:372 #, c-format msgid "Root" msgstr "Rót" #: any.pm:363 any.pm:385 #, c-format msgid "Append" msgstr "Bæta við" #: any.pm:365 standalone/drakboot:309 standalone/drakboot:313 #, c-format msgid "Video mode" msgstr "Skjáhamur" #: any.pm:367 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:368 #, c-format msgid "Network profile" msgstr "Net snið" #: any.pm:377 any.pm:382 any.pm:384 #, c-format msgid "Label" msgstr "Nafn" #: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84 #: standalone/drakfloppy:90 standalone/draksec:52 #, c-format msgid "Default" msgstr "Sjálfgefið" #: any.pm:386 #, c-format msgid "Initrd-size" msgstr "Initrd-stærð" #: any.pm:388 #, c-format msgid "NoVideo" msgstr "NoVideo" #: any.pm:399 #, c-format msgid "Empty label not allowed" msgstr "Autt er ekki leyft" #: any.pm:400 #, c-format msgid "You must specify a kernel image" msgstr "Þú verður að skilgreina ræsikjarna" #: any.pm:400 #, c-format msgid "You must specify a root partition" msgstr "Þú verður að hafa disksneið fyrir rótina" #: any.pm:401 #, c-format msgid "This label is already used" msgstr "Þetta nafn er nú þegar í notkun" #: any.pm:415 #, c-format msgid "Which type of entry do you want to add?" msgstr "Hverju viltu bæta við?" #: any.pm:416 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:416 #, c-format msgid "Other OS (SunOS...)" msgstr "Öðru stýrikerfi (SunOS...)" #: any.pm:417 #, c-format msgid "Other OS (MacOS...)" msgstr "Öðru stýrikerfi (MacOS...)" #: any.pm:417 #, c-format msgid "Other OS (Windows...)" msgstr "Öðru stýrikerfi (Windows...)" #: any.pm:445 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Hérna eru núverandi stillingar á ræsivalmynd .\n" "Þú getur bætt við fleirum eða breytt þessum." #: any.pm:592 #, c-format msgid "access to X programs" msgstr "aðgengi að X forritum" #: any.pm:593 #, c-format msgid "access to rpm tools" msgstr "aðgengi að rpm tólum" #: any.pm:594 #, c-format msgid "allow \"su\"" msgstr "leyfa \"su\"" #: any.pm:595 #, c-format msgid "access to administrative files" msgstr "aðgengi að stýrikerfisskrám" #: any.pm:596 #, c-format msgid "access to network tools" msgstr "aðgengi að nettólum" #: any.pm:597 #, c-format msgid "access to compilation tools" msgstr "aðgengi að þróunartólum" #: any.pm:602 #, c-format msgid "(already added %s)" msgstr "(%s er nú þegar til)" #: any.pm:607 #, c-format msgid "This password is too simple" msgstr "Þetta lykilorð er of einfalt" #: any.pm:608 #, c-format msgid "Please give a user name" msgstr "Vinsamlega sláðu inn notandanafn" #: any.pm:609 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'" #: any.pm:610 #, c-format msgid "The user name is too long" msgstr "Þetta notandanafn er of langt" #: any.pm:611 #, c-format msgid "This user name has already been added" msgstr "Þetta notandanafn er nú þegar til" #: any.pm:615 #, c-format msgid "Add user" msgstr "Bæta við notanda" #: any.pm:616 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Skrá notanda\n" "%s" #: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:191 #: printer/printerdrake.pm:376 printer/printerdrake.pm:4742 #: standalone/drakbackup:2708 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Lokið" #: any.pm:620 help.pm:51 #, c-format msgid "Accept user" msgstr "Samþykkja notanda" #: any.pm:631 #, c-format msgid "Real name" msgstr "Nafn notanda" #: any.pm:632 standalone/drakbackup:1648 #, c-format msgid "Login name" msgstr "Notandanafn" #: any.pm:635 #, c-format msgid "Shell" msgstr "Skel" #: any.pm:637 #, c-format msgid "Icon" msgstr "Táknmynd" #: any.pm:684 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Innskrá notanda sjálfkrafa" #: any.pm:685 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "Ég get stillt tölvuna þína til að stimpla sjálfkrafa inn einn notanda." #: any.pm:686 help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Viltu nota þennan eiginleika?" #: any.pm:687 #, c-format msgid "Choose the default user:" msgstr "Veldu sjálfgefinn notanda:" #: any.pm:688 #, c-format msgid "Choose the window manager to run:" msgstr "Veldu gluggastjórann sem þú vilt nota:" #: any.pm:700 #, c-format msgid "Please choose a language to use." msgstr "Vinsamlega veldu tungumál sem á að nota." #: any.pm:701 #, c-format msgid "Language choice" msgstr "Tungumálaval" #: any.pm:727 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrakelinux getur stutt mörg tungumál. Veldu tungumál\n" "sem þú vilt setja upp stuðning fyrir. Þau verða tiltæk þegar\n" "uppsetningu er lokið. og þú endurræsir kerfið." #: any.pm:746 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Sjálfgefið að nota Unicode" #: any.pm:747 help.pm:647 #, c-format msgid "All languages" msgstr "Öll tungumál" #: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946 #, c-format msgid "Country / Region" msgstr "Land / Svæði" #: any.pm:787 #, c-format msgid "Please choose your country." msgstr "Veldu þér land." #: any.pm:789 #, c-format msgid "Here is the full list of available countries" msgstr "Hér er listi af tiltækum löndum" #: any.pm:790 #, c-format msgid "Other Countries" msgstr "Önnur lönd" #: any.pm:798 #, c-format msgid "Input method:" msgstr "Innsláttaraðferð:" #: any.pm:799 install_any.pm:388 network/netconnect.pm:323 #: network/netconnect.pm:328 printer/printerdrake.pm:99 #: printer/printerdrake.pm:2111 #, c-format msgid "None" msgstr "Enginn" #: any.pm:914 #, c-format msgid "No sharing" msgstr "Engin miðlun" #: any.pm:914 #, c-format msgid "Allow all users" msgstr "Leyfa öllum notendum" #: any.pm:918 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "viltu leyfa notendum að miðla sínum möppum?\n" "Ef þú leyfir þetta þá geta notendur einfaldlega smellt á \"Sameign\" í " "Konqueror og Nautilus.\n" "\n" "\"Sérsniðið\" leyfir að stilla fyrir hvern notanda.\n" #: any.pm:930 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: algengt Unix net-skráarmiðlunarkerfi, með minni stuðning á Mac og " "Windows." #: any.pm:933 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: skráarkerfi notað af Windows, Mac OSX og mörgum nýlegum Linux kerfum." #: any.pm:941 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "Þú getur miðlað með NFS eða SMB. Veldu hvort þú vilt nota." #: any.pm:966 #, c-format msgid "Launch userdrake" msgstr "Ræsa userdrake" #: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805 #: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807 #: printer/printerdrake.pm:5036 standalone/drakTermServ:294 #: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499 #: standalone/drakfont:595 standalone/net_monitor:123 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "Loka" #: any.pm:968 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Netmiðlun einstakra notanda notar hópinn \"fileshare\". \n" "Þú getur notað userdrake til að bæta notendum í þennan hóp." #: authentication.pm:16 #, c-format msgid "Local file" msgstr "Staðbundin skrá" #: authentication.pm:17 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:18 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:19 #, c-format msgid "Smart Card" msgstr "Snjallkort" #: authentication.pm:20 authentication.pm:148 #, c-format msgid "Windows Domain" msgstr "Windows Lén" #: authentication.pm:21 #, c-format msgid "Active Directory with SFU" msgstr "" #: authentication.pm:22 #, c-format msgid "Active Directory with Winbind" msgstr "" #: authentication.pm:51 #, c-format msgid "Local file:" msgstr "Staðbundin skrá:" #: authentication.pm:51 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "Nota staðbundna skrá fyrir alla auðkenningu og upplýsingar um notanda" #: authentication.pm:52 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:52 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" "Nota LDAP fyrir alla (eða hluta) auðkenningu. LDAP safnar og varðveitir " "ýmsar tegundir upplýsinga innan þíns nethverfis." #: authentication.pm:53 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:53 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" "Leyfir þér að keyra hóp af tölvum í sama netupplýsingakerfi, meðsameiginleg " "lykilorð og hópaskrár." #: authentication.pm:54 #, c-format msgid "Windows Domain:" msgstr "Windows Lén:" #: authentication.pm:54 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "Winbind leyfir kerfinu að sækja upplýsingar og auðkenna notendur í Windows " "léni." #: authentication.pm:55 #, c-format msgid "Active Directory with SFU:" msgstr "" #: authentication.pm:55 authentication.pm:56 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "Kerberos er öruggt kerfi til auðkenninga-þjónustu yfir net." #: authentication.pm:56 #, c-format msgid "Active Directory with Winbind:" msgstr "" #: authentication.pm:81 #, c-format msgid "Authentication LDAP" msgstr "Auðkenning LDAP" #: authentication.pm:82 #, c-format msgid "LDAP Base dn" msgstr "LDAP Grunn DN" #: authentication.pm:83 share/compssUsers.pl:101 #, c-format msgid "LDAP Server" msgstr "LDAP þjónn" #: authentication.pm:96 fsedit.pm:21 #, c-format msgid "simple" msgstr "einfalt" #: authentication.pm:97 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:98 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:99 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:106 authentication.pm:144 #, c-format msgid "Authentication Active Directory" msgstr "Auðkenning á AD###" #: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Lén" #: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:135 share/compssUsers.pl:81 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Þjónn" #: authentication.pm:110 #, c-format msgid "LDAP users database" msgstr "LDAP notenda gagnagrunnur" #: authentication.pm:111 #, c-format msgid "Use Anonymous BIND " msgstr "" #: authentication.pm:112 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "LDAP notanda leyft að flakka í AD###" #: authentication.pm:113 #, c-format msgid "Password for user" msgstr "Lykilorðs fyrir notanda" #: authentication.pm:114 #, c-format msgid "Encryption" msgstr "Dulritun" #: authentication.pm:125 #, c-format msgid "Authentication NIS" msgstr "Auðkenning NIS" #: authentication.pm:126 #, c-format msgid "NIS Domain" msgstr "NIS lén" #: authentication.pm:127 #, c-format msgid "NIS Server" msgstr "NIS þjónn" #: authentication.pm:132 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Til að þetta gangi á W2K PDC, þá verður þú sennilega að láta " "kerfisstjórannkeyra: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access" "\" everyone /og endurræsa miðlarann.\n" "Þú þarft einnig notendanafn/lykilorð kerfisstjóra (Domain Admin) til þess að " "getatengt vélina við Windows(tm) lénið.\n" "Ef netið er ekki sett upp, þá mun Drakx reyna að tengjast netinu eftir " "aðnetið hefur verið sett upp.\n" "Ef að þetta mistekst af einhverri ástæðu og lénsauðkenni virkar ekki, " "keyrðuþá run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' og notaðu uppgefið " "Windows(tm) lén og lykilorð kerfisstjóra (Domain Admin) eftir " "kerfisræsingu.\n" "Skipunin 'wbinfo -t' mun prófa hvort leyniauðkenni þitt eru í lagi." #: authentication.pm:144 #, c-format msgid "Authentication Windows Domain" msgstr "Auðkenning Windows Léns" #: authentication.pm:149 #, c-format msgid "Domain Admin User Name" msgstr "Notandanafn kerfisstjóra léns" #: authentication.pm:150 #, c-format msgid "Domain Admin Password" msgstr "Lykilorð kerfisstjóra léns" #: authentication.pm:151 #, c-format msgid "Use Idmap for store UID/SID " msgstr "Nota Idmap til að geyma UID/SID " #: authentication.pm:152 #, c-format msgid "Default Idmap " msgstr "Sjálfgefið ldmap " #: authentication.pm:165 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "Setja lykilorð kerfisstjóra (root) og netauðkennisaðferðir" #: authentication.pm:166 #, c-format msgid "Set administrator (root) password" msgstr "Ákveða kerfislykilorð (root)" #: authentication.pm:167 standalone/drakvpn:1125 #, c-format msgid "Authentication method" msgstr "Auðkenningarregla" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:172 help.pm:722 #, c-format msgid "No password" msgstr "Ekkert lykilorð" #: authentication.pm:178 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)" #: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634 #: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459 #, c-format msgid "Authentication" msgstr "Auðkenning" #: authentication.pm:296 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Get ekki notað útsendingu án NIS léns" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:728 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Velkomin(n) i styrikerfis-raesistjorann!\n" "\n" "Veldu kerfi ur listanum her að ofan eda\n" "biddu eftir sjalfgefinni raesingu.\n" "\n" #: bootloader.pm:815 #, c-format msgid "LILO with graphical menu" msgstr "LILO með grafískri valmynd" #: bootloader.pm:816 #, c-format msgid "LILO with text menu" msgstr "LILO með textavalmynd" #: bootloader.pm:817 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:818 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:881 #, c-format msgid "not enough room in /boot" msgstr "ekki nægilegt pláss í /boot" #: bootloader.pm:1295 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Þú getur ekki sett ræsistjórann á %s disksneiðina\n" #: bootloader.pm:1340 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "Þú verður að uppfæra stillingar ræsistjórans því disksneiðar hafa verið " "endurnúmeraðar" #: bootloader.pm:1355 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "Ekki er hægt að setja ræsistjórann rétt upp. þú verður að ræsa með " "björgunardisk og velja\"%s\"" #: bootloader.pm:1356 #, c-format msgid "Re-install Boot Loader" msgstr "Endursetja inn ræsistjóra" #: common.pm:125 #, c-format msgid "KB" msgstr "KB" #: common.pm:125 #, c-format msgid "MB" msgstr "MB" #: common.pm:125 #, c-format msgid "GB" msgstr "GB" #: common.pm:133 #, c-format msgid "TB" msgstr "TB" #: common.pm:141 #, c-format msgid "%d minutes" msgstr "%d mínútur" #: common.pm:143 #, c-format msgid "1 minute" msgstr "1 mínútu" #: common.pm:145 #, c-format msgid "%d seconds" msgstr "%d sekúndur" #: common.pm:240 #, c-format msgid "kdesu missing" msgstr "kdesu vantar" #: common.pm:243 #, c-format msgid "consolehelper missing" msgstr "consolehelper vantar" #: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50 #: network/adsl_consts.pm:58 network/adsl_consts.pm:66 #, c-format msgid "Austria" msgstr "Austurríki" #: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74 #: network/adsl_consts.pm:82 network/adsl_consts.pm:93 #: network/adsl_consts.pm:101 network/netconnect.pm:50 #, c-format msgid "Belgium" msgstr "Belgía" #: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780 #: network/adsl_consts.pm:788 network/adsl_consts.pm:798 #, c-format msgid "Switzerland" msgstr "Sviss" #: crypto.pm:17 lang.pm:237 #, c-format msgid "Costa Rica" msgstr "Kosta Ríka" #: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319 #, c-format msgid "Czech Republic" msgstr "Tékkland" #: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437 #: network/adsl_consts.pm:445 #, c-format msgid "Germany" msgstr "Þýskaland" #: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343 #: network/adsl_consts.pm:354 network/adsl_consts.pm:365 #: network/adsl_consts.pm:375 network/adsl_consts.pm:385 #: network/adsl_consts.pm:396 network/adsl_consts.pm:407 #: network/adsl_consts.pm:417 network/adsl_consts.pm:427 #: network/netconnect.pm:47 #, c-format msgid "France" msgstr "Frakkland" #: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455 #, c-format msgid "Greece" msgstr "Grikkland" #: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463 #, c-format msgid "Hungary" msgstr "Ungverjaland" #: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489 #: network/adsl_consts.pm:499 network/adsl_consts.pm:509 #: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Ítalía" #: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545 #: network/adsl_consts.pm:553 network/adsl_consts.pm:561 #: network/adsl_consts.pm:569 network/netconnect.pm:48 #, c-format msgid "Netherlands" msgstr "Holland" #: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577 #: network/adsl_consts.pm:582 network/adsl_consts.pm:587 #: network/adsl_consts.pm:592 network/adsl_consts.pm:597 #: network/adsl_consts.pm:602 network/adsl_consts.pm:607 #, c-format msgid "Norway" msgstr "Noregur" #: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614 #: network/adsl_consts.pm:624 #, c-format msgid "Poland" msgstr "Pólland" #: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772 #, c-format msgid "Sweden" msgstr "Svíþjóð" #: crypto.pm:28 lang.pm:382 #, c-format msgid "Slovakia" msgstr "Slóvakía" #: crypto.pm:29 lang.pm:406 #, c-format msgid "Taiwan" msgstr "Tævan" #: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51 #, c-format msgid "United States" msgstr "Bandaríkin" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDav er samskiptaregla sem leyfir þér að tengja möppu vefmiðlara\n" "og nota það sem staðbundið skráarkerfi (vefmiðlarinn verður að vera\n" "uppsettur sem WebDAV skáarmiðlari). Ef þú vilt bæta við WebDAV\n" "tengipunktum, veldu \"Nýtt\"." #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Ný" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Aftengja" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Tengipunktur" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:435 #: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Tengipunktur" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Vinsamlega gefið upp WebDAV slóð miðlara" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "Slóðin verður að byrja á http:// eða https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Þjónn: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:504 #: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241 #, c-format msgid "Mount point: " msgstr "Tengipunktur: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248 #, c-format msgid "Options: %s" msgstr "Valkostir: %s" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "Please make a backup of your data first" msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum" #: diskdrake/hd_gtk.pm:98 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Ef þú ætlar að nota aboot, þá verður þú að skilja eftir pláss (2048 sneiðar " "er nóg)\n" "fremst á disknum" #: diskdrake/hd_gtk.pm:155 help.pm:530 #, c-format msgid "Wizard" msgstr "Álfur" #: diskdrake/hd_gtk.pm:188 #, c-format msgid "Choose action" msgstr "Veldu aðgerð" #: diskdrake/hd_gtk.pm:192 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Þú hefur eina stóra FAT disksneið.\n" "(venjulega notuð af Microsoft DOS/Windows).\n" "Ég legg til að þú endursníðir hana\n" "(smelltu á hana, síðan á \"Endursníða\")" #: diskdrake/hd_gtk.pm:194 #, c-format msgid "Please click on a partition" msgstr "Smelltu á disksneið" #: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482 #: standalone/drakbackup:2943 standalone/drakbackup:3003 #, c-format msgid "Details" msgstr "Ítarlegar" #: diskdrake/hd_gtk.pm:254 #, c-format msgid "No hard drives found" msgstr "Engir harðir diskar fundust" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Journalised FS" msgstr "Journalised FS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Swap" msgstr "Diskminni" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168 #: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Annað" #: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181 #, c-format msgid "Empty" msgstr "Tóm" #: diskdrake/hd_gtk.pm:343 #, c-format msgid "Filesystem types:" msgstr "Tegundir skráakerfa:" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``%s'' instead" msgstr "Nota ``%s'' í staðinn" #: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459 #, c-format msgid "Create" msgstr "Búa til" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 #: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:106 standalone/harddrake2:115 #, c-format msgid "Type" msgstr "Tegund" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444 #: standalone/drakperm:124 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "Eyða" #: diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``Unmount'' first" msgstr "Nota ``Aftengja'' fyrst" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose another partition" msgstr "Veldu aðra disksneið" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose a partition" msgstr "Veldu disksneið" #: diskdrake/interactive.pm:220 #, c-format msgid "Exit" msgstr "Hætta" #: diskdrake/interactive.pm:253 help.pm:530 #, c-format msgid "Undo" msgstr "Afturkalla" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to normal mode" msgstr "Fara í venjulegan ham" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to expert mode" msgstr "Færa í snillingsham" #: diskdrake/interactive.pm:272 #, c-format msgid "Continue anyway?" msgstr "Halda samt áfram?" #: diskdrake/interactive.pm:275 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "Þú ættir a forsníða disksneiðina %s.\n" "Annars verður engin færsla fyrir tengipunkt %s skráð í fstab.\n" "Hætta samt?" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without saving" msgstr "Hætta án þess að vista" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without writing the partition table?" msgstr "Hætta án þess að skrifa sneiðatöfluna?" #: diskdrake/interactive.pm:287 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Viltu vista /etc/fstab breytingar" #: diskdrake/interactive.pm:294 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi" #: diskdrake/interactive.pm:307 help.pm:530 #, c-format msgid "Clear all" msgstr "Hreinsa allt" #: diskdrake/interactive.pm:308 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Ráðstafa skjálfkrafa" #: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:122 #, c-format msgid "More" msgstr "Meira" #: diskdrake/interactive.pm:314 #, c-format msgid "Hard drive information" msgstr "Sýna upplýsingar um harðan disk" #: diskdrake/interactive.pm:346 #, c-format msgid "All primary partitions are used" msgstr "Allar aðal-skráarsneiðar eru í notkun" #: diskdrake/interactive.pm:347 #, c-format msgid "I can not add any more partitions" msgstr "Get ekki bætt við disksneiðum" #: diskdrake/interactive.pm:348 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til " "viðbótarsneið" #: diskdrake/interactive.pm:359 help.pm:530 #, c-format msgid "Save partition table" msgstr "Vista sneiðatöflu" #: diskdrake/interactive.pm:360 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Endurheimta sneiðatöflunna" #: diskdrake/interactive.pm:361 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Bjarga sneiðatöflunni" #: diskdrake/interactive.pm:363 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Endurhlaða sneiðatöflunna" # ## skrytid #: diskdrake/interactive.pm:365 #, c-format msgid "Removable media automounting" msgstr "Sjálfvirk tenging aukatækja" #: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402 #, c-format msgid "Select file" msgstr "Veljið skrá" #: diskdrake/interactive.pm:388 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n" "Halda áfram?" #: diskdrake/interactive.pm:417 #, c-format msgid "Trying to rescue partition table" msgstr "Reyni að endurheimta disksneiðatöfluna" #: diskdrake/interactive.pm:423 #, c-format msgid "Detailed information" msgstr "Ítarlegri upplýsingar" #: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743 #, c-format msgid "Resize" msgstr "Breyta stærð" #: diskdrake/interactive.pm:439 #, c-format msgid "Format" msgstr "Forsníða" #: diskdrake/interactive.pm:441 #, c-format msgid "Add to RAID" msgstr "Bæta við RAID" #: diskdrake/interactive.pm:442 #, c-format msgid "Add to LVM" msgstr "Bæta við LVM" #: diskdrake/interactive.pm:445 #, c-format msgid "Remove from RAID" msgstr "Taka úr RAID" #: diskdrake/interactive.pm:446 #, c-format msgid "Remove from LVM" msgstr "Taka úr LVM" #: diskdrake/interactive.pm:447 #, c-format msgid "Modify RAID" msgstr "Breyta RAID" #: diskdrake/interactive.pm:448 #, c-format msgid "Use for loopback" msgstr "Nota fyrir sýndardisk" #: diskdrake/interactive.pm:497 #, c-format msgid "Create a new partition" msgstr "Búa til nýja disksneið" #: diskdrake/interactive.pm:500 #, c-format msgid "Start sector: " msgstr "Byrjunar geiri" #: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899 #, c-format msgid "Size in MB: " msgstr "Stærð í MB: " #: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900 #, c-format msgid "Filesystem type: " msgstr "Tegund skráakerfis: " #: diskdrake/interactive.pm:508 #, c-format msgid "Preference: " msgstr "Valkostur: " #: diskdrake/interactive.pm:511 #, c-format msgid "Logical volume name " msgstr "Nafn lógiskrar disksneiðar" #: diskdrake/interactive.pm:541 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Þú getur ekki búið til nýja disksneið\n" "(því að þú hefur búið til hámarksfjölda aðalsneiða).\n" "Fjarlægðu fyrst aðalsneiðina og búðu til aukadisksneið." #: diskdrake/interactive.pm:571 #, c-format msgid "Remove the loopback file?" msgstr "Fjarlægja sýndardisk-skrá?" #: diskdrake/interactive.pm:590 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Eftir breytingu á sneið %s, hafa öll gögn á þessari disksneið tapast" #: diskdrake/interactive.pm:602 #, c-format msgid "Change partition type" msgstr "Breyta tegund sneiðar" #: diskdrake/interactive.pm:603 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Hvaða skráarkerfi viltu?" #: diskdrake/interactive.pm:611 #, c-format msgid "Switching from ext2 to ext3" msgstr "Breyti frá ext2 í ext3" #: diskdrake/interactive.pm:640 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Hvar viltu tengja sýndardisk-skrá %s?" #: diskdrake/interactive.pm:641 #, c-format msgid "Where do you want to mount device %s?" msgstr "Hvar viltu tengja tæki %s?" #: diskdrake/interactive.pm:646 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Get ekki aftengt tengipunkt þar sem þessi disksneið inniheldur\n" "sýndardisk-skrá. Fjarlægðu sýndardiskinn fyrst (aftengdu)" #: diskdrake/interactive.pm:671 #, c-format msgid "Where do you want to mount %s?" msgstr "Hvar viltu tengja tæki %s?" #: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Breyta stærð" #: diskdrake/interactive.pm:695 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Reikna mörk FAT skráarkerfis" #: diskdrake/interactive.pm:731 #, c-format msgid "This partition is not resizeable" msgstr "Ekki er hægt að breyta stærð á þessari disksneið" #: diskdrake/interactive.pm:736 #, c-format msgid "All data on this partition should be backed-up" msgstr "Öll gögn á þessari disksneið ætti að afrita" #: diskdrake/interactive.pm:738 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Eftir stærðarbreytingu á sneið %s, hafa öll gögn á þessari disksneið tapast" #: diskdrake/interactive.pm:743 #, c-format msgid "Choose the new size" msgstr "Veldu nýja stærð" #: diskdrake/interactive.pm:744 #, c-format msgid "New size in MB: " msgstr "Stærð í MB: " #: diskdrake/interactive.pm:787 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Til að staðfesta að gögn séu í lagi eftir að disksneiðum hefur verið \n" "breytt verður að keyra diskaprófun þegar þú ræsir Windows(tm) næst" #: diskdrake/interactive.pm:825 #, c-format msgid "Choose an existing RAID to add to" msgstr "Veldu RAID sem til er fyrir til að bæta við" #: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844 #, c-format msgid "new" msgstr "ný" #: diskdrake/interactive.pm:842 #, c-format msgid "Choose an existing LVM to add to" msgstr "Veldu LVM sem til er fyrir til að bæta við" #: diskdrake/interactive.pm:848 #, c-format msgid "LVM name?" msgstr "LVM nafn?" #: diskdrake/interactive.pm:884 #, c-format msgid "This partition can not be used for loopback" msgstr "Það er ekki hægt að nota þessa sneið fyrir sýndardisk" #: diskdrake/interactive.pm:897 #, c-format msgid "Loopback" msgstr "Sýndardiskur" #: diskdrake/interactive.pm:898 #, c-format msgid "Loopback file name: " msgstr "Skráarnafn sýndardisks: " #: diskdrake/interactive.pm:903 #, c-format msgid "Give a file name" msgstr "Gefðu upp skráarnafn" #: diskdrake/interactive.pm:906 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Skrá er þegar notuð sem annar sýndardiskur, veldu annan" #: diskdrake/interactive.pm:907 #, c-format msgid "File already exists. Use it?" msgstr "Skráin er þegar til, nota hana?" #: diskdrake/interactive.pm:930 #, c-format msgid "Mount options" msgstr "Tengistillingar" #: diskdrake/interactive.pm:937 #, c-format msgid "Various" msgstr "Ýmislegt" #: diskdrake/interactive.pm:1002 #, c-format msgid "device" msgstr "tæki" #: diskdrake/interactive.pm:1003 #, c-format msgid "level" msgstr "stig" #: diskdrake/interactive.pm:1004 #, c-format msgid "chunk size in KiB" msgstr "blokkarstærð í KiB" #: diskdrake/interactive.pm:1021 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Varaðu þig: þessi aðgerð er hættuleg." #: diskdrake/interactive.pm:1036 #, c-format msgid "What type of partitioning?" msgstr "Hvaða tegund af disksneiðingu?" #: diskdrake/interactive.pm:1074 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Þú þarft að endurræsa áður en breytingar taka gildi" #: diskdrake/interactive.pm:1083 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!" #: diskdrake/interactive.pm:1096 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Eftir að diskssneið %s hefur verið forsniðin, hafa öll gögn á þessari " "disksneið tapast" #: diskdrake/interactive.pm:1112 #, c-format msgid "Move files to the new partition" msgstr "Flytja skrár á nýju disksneiðina" #: diskdrake/interactive.pm:1112 #, c-format msgid "Hide files" msgstr "Fela skrár" #: diskdrake/interactive.pm:1113 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Mappa %s inniheldur nú þegar gögn\n" "(%s)" #: diskdrake/interactive.pm:1124 #, c-format msgid "Moving files to the new partition" msgstr "Færi skrár á nýju disksneiðina" #: diskdrake/interactive.pm:1128 #, c-format msgid "Copying %s" msgstr "Afrita %s" #: diskdrake/interactive.pm:1132 #, c-format msgid "Removing %s" msgstr "Fjarlægi %s" #: diskdrake/interactive.pm:1146 #, c-format msgid "partition %s is now known as %s" msgstr "disksneið %s er þekkt sem %s" #: diskdrake/interactive.pm:1147 #, c-format msgid "Partitions have been renumbered: " msgstr "Disksneiðar hafa verið endurnúmeraðar: " #: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226 #, c-format msgid "Device: " msgstr "Tæki: " #: diskdrake/interactive.pm:1168 #, c-format msgid "Devfs name: " msgstr "Devfs nafn: " #: diskdrake/interactive.pm:1169 #, c-format msgid "Volume label: " msgstr "Diskauðkenni: " #: diskdrake/interactive.pm:1170 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS drifstafur: %s (bara ágiskun)\n" #: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183 #: diskdrake/interactive.pm:1244 #, c-format msgid "Type: " msgstr "Tegund: " #: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296 #, c-format msgid "Name: " msgstr "Nafn: " #: diskdrake/interactive.pm:1185 #, c-format msgid "Start: sector %s\n" msgstr "Byrja: geiri %s\n" #: diskdrake/interactive.pm:1186 #, c-format msgid "Size: %s" msgstr "Stærð: %s" #: diskdrake/interactive.pm:1188 #, c-format msgid ", %s sectors" msgstr ", %s geirar" #: diskdrake/interactive.pm:1190 #, c-format msgid "Cylinder %d to %d\n" msgstr "Sívalningur %d til %d\n" #: diskdrake/interactive.pm:1191 #, c-format msgid "Number of logical extents: %d" msgstr "Fjöldi auka sýndarsneiða: %d" #: diskdrake/interactive.pm:1192 #, c-format msgid "Formatted\n" msgstr "Forsniðinn\n" #: diskdrake/interactive.pm:1193 #, c-format msgid "Not formatted\n" msgstr "Ekki forsniðinn\n" #: diskdrake/interactive.pm:1194 #, c-format msgid "Mounted\n" msgstr "Tengdur\n" #: diskdrake/interactive.pm:1195 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1197 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Sýndartengdar skrár:\n" " %s\n" #: diskdrake/interactive.pm:1198 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Sjálfgefin disksneið ræst\n" " (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n" #: diskdrake/interactive.pm:1200 #, c-format msgid "Level %s\n" msgstr "Stig %s\n" #: diskdrake/interactive.pm:1201 #, c-format msgid "Chunk size %d KiB\n" msgstr "Blokkarstærð %d KiB\n" #: diskdrake/interactive.pm:1202 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diskar %s\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Loopback file name: %s" msgstr "Sýndardisksskráarnafn: %s" #: diskdrake/interactive.pm:1207 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Líklega er þessi disksneið\n" "Reklasneið. Þú ættir sennilega\n" "að láta hana í eiga sig.\n" #: diskdrake/interactive.pm:1210 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Þessi sérstaka ræsidisksneið\n" "er til að geta ræst tvö\n" "mismunandi kerfi á vélinni þinni.\n" #: diskdrake/interactive.pm:1227 #, c-format msgid "Read-only" msgstr "Ritvarið" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s\n" msgstr "Stærð: %s\n" #: diskdrake/interactive.pm:1229 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n" #: diskdrake/interactive.pm:1230 #, c-format msgid "Info: " msgstr "Upplýsingar: " #: diskdrake/interactive.pm:1231 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-diskar %s\n" #: diskdrake/interactive.pm:1232 #, c-format msgid "Partition table type: %s\n" msgstr "Disksneiðartöflu tegund: %s\n" #: diskdrake/interactive.pm:1233 #, c-format msgid "on channel %d id %d\n" msgstr "á gagnabraut %d id %d\n" #: diskdrake/interactive.pm:1265 #, c-format msgid "Filesystem encryption key" msgstr "Dulritunarlykill skráakerfis" #: diskdrake/interactive.pm:1266 #, c-format msgid "Choose your filesystem encryption key" msgstr "Veldu dulritunarlykil fyrir skráarkerfið" #: diskdrake/interactive.pm:1269 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)" #: diskdrake/interactive.pm:1270 #, c-format msgid "The encryption keys do not match" msgstr "Dulritunarlyklarnir eru mismunandi" #: diskdrake/interactive.pm:1273 network/netconnect.pm:1136 #: standalone/drakconnect:397 #, c-format msgid "Encryption key" msgstr "Dulritunarlykill" #: diskdrake/interactive.pm:1274 #, c-format msgid "Encryption key (again)" msgstr "Dulritunarlykill (aftur)" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Breyta tegund" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "Get ekki tengst sem notandi %s (vitlaust lykilorð?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Lénsauðkenningar er þörf" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "hvaða notandanafn" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Önnur" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Vinsamlega gefðu upp notandanafn, lykilorð og nafn léns til að fá aðgang að " "þessum miðlara." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494 #, c-format msgid "Username" msgstr "Notandanafn" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Leita að þjónum" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Leita að nýjum þjónum" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pakkinn %s þarfnast innsetningar, viltu setja hann inn?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "Vantar nauðsynlegan pakka %s" #: do_pkgs.pm:172 #, c-format msgid "Installing packages..." msgstr "Set inn pakka..." #: do_pkgs.pm:217 #, c-format msgid "Removing packages..." msgstr "Fjarlægi pakka..." #: fs.pm:487 fs.pm:536 #, c-format msgid "Mounting partition %s" msgstr "Tengi disksneið %s" #: fs.pm:488 fs.pm:537 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "tenging disksneiðar %s í möppu %s mistókst" #: fs.pm:508 fs.pm:515 #, c-format msgid "Checking %s" msgstr "Athuga %s" #: fs.pm:553 partition_table.pm:391 #, c-format msgid "error unmounting %s: %s" msgstr "villa við að aftengja %s: %s" #: fs.pm:585 #, c-format msgid "Enabling swap partition %s" msgstr "Virkja diskminni á disksneið %s" #: fs/format.pm:44 fs/format.pm:51 #, c-format msgid "Formatting partition %s" msgstr "Forsníð disksneið %s" #: fs/format.pm:48 #, c-format msgid "Creating and formatting file %s" msgstr "bý til og forsníð skrá %s" #: fs/format.pm:83 #, c-format msgid "I do not know how to format %s in type %s" msgstr "kann ekki að forsníða %s af tegundinni %s" #: fs/format.pm:88 fs/format.pm:90 #, c-format msgid "%s formatting of %s failed" msgstr "%s forsniðið á %s mistókst" #: fs/mount_options.pm:112 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Ekki uppfæra aðgengistíma á þessu skráarkerfi\n" "(t.d. fyrir hraðari aðgengi í féttaskrár til að herða upp á fréttaþjónum)." #: fs/mount_options.pm:115 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Er aðeins hægt að tengja nema með ákveðinni beiðni\n" "(þ.e. mount -a skipunin tengir ekki skráarkerfið)." #: fs/mount_options.pm:118 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "Ekki túlka staf eða blokk-tæki á þessu skáarkerfi." #: fs/mount_options.pm:120 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Ekki leyfa keyrslu af neinum forritum frá þessu tengda skráarkerfi.\n" "Þetta gæti verið gagnlegt fyrir miðlara sem hefur tengd skráarkerfi\n" "sem innihalda forrit fyrir aðrar vélargerðir." #: fs/mount_options.pm:124 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Ekki leyfa forritum að setja notanda eða hóp auðkenni\n" "(Þetta lítur út fyrir að vera öruggt, en er í raun frekar óöruggt\n" "ef þú hefur suidperl(1) uppsett)" #: fs/mount_options.pm:128 #, c-format msgid "Mount the file system read-only." msgstr "Tengja skráarkerfi aðeins til lestrar." #: fs/mount_options.pm:130 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "Allar aðgerðir á skráarkerfinu ættu að vera gerðar í réttri röð." #: fs/mount_options.pm:134 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "Leyfir venjulegum notanda að tengja skráarkerfið. Nafn notandans sem tengir\n" "skráarkerfið er skráð í mtab skrána þannig að hann geti aftengt " "skráarkerfið\n" "aftur. Þessi aðgerð innifelur aðgerðirnar noexec, nosuid og nodev\n" "(nema þær séu sérstaklega teknar fram í aukaval línunni sem user,exec,dev," "suid)." #: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "Veita skrifleyfi til venjulegra notenda" #: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "Veita aðeins lestrarleyfi til venjulegra notenda" #: fs/type.pm:370 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Þú getur ekki notað JFS á disksneiðar minni en 16MB" #: fs/type.pm:371 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Þú getur ekki notað ReiserFs á disksneiðar minni en 32MB" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "með /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "netþjónn" #: fsedit.pm:184 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Ég get ekki lesið disksneiðatöflu þína á tæki %s, hún er of skemmd fyrir " "mig :(\n" "Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar \n" "(Öll gögn tapast!). Önnur lausn er að láta DrakX ekki breyta " "disksneiðatöflunni\n" "(villan er %s)\n" "\n" "Viltu eyða öllum þessum disksneiðum?\n" #: fsedit.pm:401 #, c-format msgid "Mount points must begin with a leading /" msgstr "Heiti tengipunkta verða að byrja á /" #: fsedit.pm:402 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Heiti tengipunkta eiga aðeins að innihalda bókstafi og tölur" #: fsedit.pm:403 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Það er þegar disksneið með tengipunktinn %s\n" #: fsedit.pm:405 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Þú hefur valið að nota RAID hugbúnað til að stjórna rótarsneið (/).\\ Enginn " "ræsistjóri ræður við þetta án sérstakrar /boot sneiðar.\n" "Vinsamlega passaðu uppá að bæta við sneið fyrir /boot" #: fsedit.pm:408 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s" msgstr "Þú gtur ekki notað LVM sýndardisk fyrir tengipunkt %s" #: fsedit.pm:410 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Þú hefur valið að nota LVM uppsettan disk sem kerfisrót (/).\\ Enginn " "ræsistjóri ræður við þetta án sérstakrar /boot sneiðar.\n" "Vinsamlega passaðu uppá að bæta við sneið fyrir /boot" #: fsedit.pm:413 #, c-format msgid "" "You may not be able to install lilo (since lilo does not handle a LV on " "multiple PVs)" msgstr "" #: fsedit.pm:416 fsedit.pm:418 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Þessi mappa ætti að vera í rótarskráarkerfinu" #: fsedit.pm:420 fsedit.pm:422 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Þú þarft raunverulegt skráarkerfi (ext2/ext3, reiserfs, xfs, eða jfs) fyrir " "þennan tengipunkt\n" #: fsedit.pm:424 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "Þú getur ekki notað dulritað skráarkerfi á tengipunkt %s" #: fsedit.pm:485 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Ekki nægilegt pláss til sjálfvirkrar úthlutunar" #: fsedit.pm:487 #, c-format msgid "Nothing to do" msgstr "Ekkert að gera" #: harddrake/data.pm:61 install_any.pm:1505 #, c-format msgid "Floppy" msgstr "Disklingadrif" #: harddrake/data.pm:71 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:81 install_any.pm:1506 #, c-format msgid "Hard Disk" msgstr "Diskur" #: harddrake/data.pm:90 install_any.pm:1507 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:100 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD skrifarar" #: harddrake/data.pm:110 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:120 standalone/drakbackup:2051 #, c-format msgid "Tape" msgstr "Segulband" #: harddrake/data.pm:129 #, c-format msgid "Videocard" msgstr "Skjákort" #: harddrake/data.pm:139 #, c-format msgid "Tvcard" msgstr "Sjónvarpskort" #: harddrake/data.pm:148 #, c-format msgid "Other MultiMedia devices" msgstr "Önnur margmiðlunartæki" #: harddrake/data.pm:157 #, c-format msgid "Soundcard" msgstr "Hljóðkort" #: harddrake/data.pm:166 #, c-format msgid "Webcam" msgstr "Vefmyndavél" #: harddrake/data.pm:180 #, c-format msgid "Processors" msgstr "Örgjörvar" #: harddrake/data.pm:190 #, c-format msgid "ISDN adapters" msgstr "ISDN spjöld" #: harddrake/data.pm:200 #, c-format msgid "Ethernetcard" msgstr "Netkort" #: harddrake/data.pm:218 network/netconnect.pm:518 #, c-format msgid "Modem" msgstr "Módald" #: harddrake/data.pm:228 #, c-format msgid "ADSL adapters" msgstr "ADSL spjöld" #: harddrake/data.pm:242 #, c-format msgid "Memory" msgstr "Minni" #: harddrake/data.pm:251 #, c-format msgid "AGP controllers" msgstr "AGP stýringar" #: harddrake/data.pm:260 help.pm:186 help.pm:855 #: install_steps_interactive.pm:978 #, c-format msgid "Printer" msgstr "Prentari" #: harddrake/data.pm:270 #, c-format msgid "Joystick" msgstr "Gleðigandur" #: harddrake/data.pm:280 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA stýringar" #: harddrake/data.pm:289 #, c-format msgid "SATA controllers" msgstr "SATA stýringar" #: harddrake/data.pm:298 #, c-format msgid "Firewire controllers" msgstr "Firewire stýringar" #: harddrake/data.pm:307 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA stýringar" #: harddrake/data.pm:316 #, c-format msgid "SCSI controllers" msgstr "SCSI stýringar" #: harddrake/data.pm:325 #, c-format msgid "USB controllers" msgstr "USB stýringar" #: harddrake/data.pm:334 #, c-format msgid "USB ports" msgstr "USB port" #: harddrake/data.pm:343 #, c-format msgid "SMBus controllers" msgstr "SMBus stýringar" #: harddrake/data.pm:352 #, c-format msgid "Bridges and system controllers" msgstr "Brýr og kerfisstýringar" #: harddrake/data.pm:361 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118 #: install_steps_interactive.pm:938 standalone/keyboarddrake:28 #, c-format msgid "Keyboard" msgstr "Lyklaborð" #: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971 #, c-format msgid "Mouse" msgstr "Mús" #: harddrake/data.pm:397 #, c-format msgid "Scanner" msgstr "Myndskanni" #: harddrake/data.pm:407 standalone/harddrake2:439 #, c-format msgid "Unknown/Others" msgstr "Óþekkt/annað" #: harddrake/data.pm:435 #, c-format msgid "cpu # " msgstr "cpu # " #: harddrake/sound.pm:191 standalone/drakconnect:169 #: standalone/drakconnect:615 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Augnablik... Framkvæmi stillingar" #: harddrake/sound.pm:227 #, c-format msgid "No alternative driver" msgstr "Enginn aukarekill" #: harddrake/sound.pm:228 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Það er enginn þekktur OSS/ALSA aukarekill fyrir hljóðkortið þitt (%s) sem nú " "notar \"%s\"" #: harddrake/sound.pm:234 #, c-format msgid "Sound configuration" msgstr "Hljóðuppsetning" #: harddrake/sound.pm:236 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Hér getur þú valið annan rekil (annað hvort OSS eða ALSA) fyrir hljóðkortið " "þitt (%s)." #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:241 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Kortið þitt notar rekilinn %s\"%s\" (sjálfgefið fyrir kortið þitt er \"%s\")" #: harddrake/sound.pm:243 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) var fyrsta hljóðkerfis-forritunar-viðmótið. Það er " "óháð stýrikerfum (og til á flestum UNIX(tm) kerfum) en hefur mjög einfalt og " "takmarkað viðmót.\n" "Þess utan verða allir OSS reklar að finna upp hjólið.\n" "\n" "ALSA (Advanced Linux Sound Architecture) er hljóðkerfi byggt á einingum sem " "styður mjög mörg ISA, USB og PCI kort.\n" "\n" "Það býður einnig upp á miklu þróaðra forritunarumhverfi en OSS.\n" "\n" "Til að nota ALSA, þá getur þú annað hvort notað:\n" "- gamla OSS viðmótshermirinn\n" "- nýja ALSA forritunarviðmótið sem býður upp á aukna möguleika en krefst " "notkunar á ALSA forritunarsafninu.\n" #: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Rekill:" #: harddrake/sound.pm:262 #, c-format msgid "Trouble shooting" msgstr "Vandamálaleit" #: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039 #: network/netconnect.pm:504 printer/printerdrake.pm:1142 #: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228 #: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341 #: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684 #: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643 #: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092 #: printer/printerdrake.pm:5183 standalone/drakTermServ:325 #: standalone/drakTermServ:1111 standalone/drakTermServ:1172 #: standalone/drakTermServ:1821 standalone/drakbackup:510 #: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224 #: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27 #: standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Aðvörun" #: harddrake/sound.pm:270 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "Gamli \"%s\" rekillinn er á svörtum lista.\n" "\n" "Hann hefur verið skráður valdur að kerfisvillum þegar honum er afhlaðið.\n" "\n" "Nýji \"%s\" rekillinn verður aðeins notaður við næstu ræsingu." #: harddrake/sound.pm:278 #, c-format msgid "No open source driver" msgstr "Enginn \"frjáls hugbúnaðar\" rekill" #: harddrake/sound.pm:279 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Það er enginn \"frjáls\" rekill fyrir hljóðkortið þitt (%s) en það er til " "rekill framleiðanda á \"%s\"." #: harddrake/sound.pm:282 #, c-format msgid "No known driver" msgstr "Enginn þekktur rekill" #: harddrake/sound.pm:283 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Það er enginn þekktur rekill fyrir hljóðkortið þitt (%s)" #: harddrake/sound.pm:287 #, c-format msgid "Unknown driver" msgstr "Óþekktur rekill" #: harddrake/sound.pm:288 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Villa: rekillinn \"%s\" er ekki á listanum" #: harddrake/sound.pm:302 #, c-format msgid "Sound trouble shooting" msgstr "Vandamálaleit hljóðkorta" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:305 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Klassísk hljóðvilluprófun er að keyra eftirfarandi skipanir:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" segir þér hvaða rekill hljóðkortið\n" "notar sjálfgefið\n" "\n" "- \"grep sound-slot /etc/modules.conf\" segir þér hvaða rekill er nú í\n" "notkun af hljóðkerfinu\n" "\n" "- \"/sbin/lsmod\" sýnir þér hvor þessum rekli hefur þegar verið hlaðið\n" "inn eða ekki\n" "\n" "- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" segir\n" "þér hvort hljóð og alsa þjónustur séu stilltar til að ræsa á vinnslustigi 3\n" "\n" "- \"aumix -q\" segir þér hvort slökkt sé hljóði í hljóðblandara\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" segir þér hvaða forrit er að nota " "hljóðkortið.\n" #: harddrake/sound.pm:331 #, c-format msgid "Let me pick any driver" msgstr "Lyfðu mér að velja rekil" #: harddrake/sound.pm:334 #, c-format msgid "Choosing an arbitrary driver" msgstr "Velja einhvern rekil" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:337 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Ef þú heldur að þú vitir hvaða rekill sé réttur fyrir kortið þitt\n" "þá getur þú valið einn í listanum hér að ofan\n" "\n" "Núverandi rekill fyrir \"%s\" hljóðkortið er \"%s\"" #: harddrake/v4l.pm:14 #, c-format msgid "Auto-detect" msgstr "Finna sjálfkrafa" #: harddrake/v4l.pm:72 harddrake/v4l.pm:235 #, c-format msgid "Unknown|Generic" msgstr "Óþekkt|almennt" #: harddrake/v4l.pm:105 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]" #: harddrake/v4l.pm:106 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]" #: harddrake/v4l.pm:309 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "GNU/Linux 'bttv' einingin finnur sjálfkrafa uppsetningu á flestum nútíma " "sjónvarpskortum.\n" "Ef kortið þitt er ekki sett rétt upp þá getur þú stillt móttakarann og " "korttegundir hér. Veldu viðföng fyrir kortið þitt ef þess er þörf." #: harddrake/v4l.pm:312 #, c-format msgid "Card model:" msgstr "Kort tegund:" #: harddrake/v4l.pm:313 #, c-format msgid "Tuner type:" msgstr "Útvarpstegund:" #: harddrake/v4l.pm:314 #, c-format msgid "Number of capture buffers:" msgstr "Fjöldi móttöku biðminna:" #: harddrake/v4l.pm:314 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "fjöldi biðminniseininga sem eru viðbúnir til móttöku á hljóði" #: harddrake/v4l.pm:316 #, c-format msgid "PLL setting:" msgstr "PLL stilling:" #: harddrake/v4l.pm:317 #, c-format msgid "Radio support:" msgstr "Útvarpsstuðningur:" #: harddrake/v4l.pm:317 #, c-format msgid "enable radio support" msgstr "virkja útvarps stuðning" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Áður en þú heldur áfram, ættir þú að lesa vandlega leyfisskilmálana. Þeir\n" "taka yfir alla Mandrakelinux dreifinguna. Ef þú er samþykk(ur) öllum þeim\n" "skilmáum sem þar standa, krossaðu þá við í \"%s\" reitinn, ef ekki\n" "smelltu þá á \"%s\" hnappinn sem mun endurræsa tölvuna þína." #: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "Samþykkja" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux er fjölnotanda uhverfi sem þýðir að hver notandi getur skilgreint\n" "sitt eigið umhverfi og stillingar, eigin skrár o.s.frv. En ólíkt \"root\" " "sem\n" "er kerfisstjóri, þá munu þeir notendur sem þú skilgreinir hér ekki hafa\n" "leyfi til að breyta neinu nema sínum eigin skrám og stillingum. Þetta\n" "verndar kerfið frá óhöppum eða illvígum forritum sem gætu haft áhrif\n" "á heildarverkun kerfisins. Þú verður að búa til a.m.k. einn venjulegan\n" "notanda fyrir þig sjálfan. -- þetta er það auðkenni sem þú ættir að til\n" "daglegrar notkunar. Þó að það sé mjög auðvelt aðskrá sig inn sem \"root\"\n" "til allrar vinnu, þá getur það einnig verið mjög hættulegt!\n" "Ein mkög einföld mistök gætu valdið því að kerfið virki ekki lengur. Ef þú\n" "gerir alvarleg mistök sem venjulegur notandi, þá hefur þú í versta falli\n" "tapað gögnum, en þú hefur ekki haft áhrif á heildarvirkni kerfisins.\n" "\n" "Kerfið spyr þig fyrst um reunverulegt nafn. Auðvitað er ekki skylda að\n" "fylla þetta rétt út -- þú getur skrifað hvað sem þú vilt. DrakX mun nota\n" "fyrsta orðið í þessu svæði og afrita það í \"%s\", sem er notandanafn\n" "sem á að nota til að auðkenna sig gagnvart kefinu. Ef þú vilt, getur þú\n" "breytt því sjálfgefna og gefið upp annað notandanafn. Næsta skref er að\n" "skrá lykilorð. Frá öryggissjónamiði séð er lykilorð venjulegs notanda ekki\n" "jafn mikilvægt og lykilorð kerfisstjóra \"root\", en það er engin ástæða\n" "til að hafa það autt eða of einfalt: athugið að þetta gefur fullan aðgang\n" "að þínum skrám og gögnum, sem eru þá í húfi.\n" "\n" "Þegar þú smellir á \"%s\" þá getur þú bætt við öðrum notendum. Bættu\n" "við notanda fyrir vini, föður, móður og systkini o.s.frv. Smelltu á \"%s\"\n" "þegar þú hefur lokið að bæta við notendum.\n" "\n" "Með því að smella á \"%s\" getur þú breytt sjálfgefinni \"skel\" fyrir " "hvern\n" "notanda (sjálfgefið er bash).\n" "\n" "Þegar þú hefur lokið við að bæta við notendum, þá verður þú beðinn\n" "um að velja notanda sem verður sjálfkrafa skráður inn þegar tölvan ræsir.\n" "Ef þú vilt nota þér þann möguleika (og hefur ekki miklar áhyggjur af " "öryggi),\n" "veldu æskilegan notanda og gluggastjóra, smelltu síðan á \"%s\". Ef þú\n" "vilt ekki nota þér þennan möguleika, fjarlægðu þá merkinguna við \"%s\"\n" "reitinn." #: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715 #, c-format msgid "User name" msgstr "Notandanafn" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233 #: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317 #: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581 #: standalone/drakTermServ:382 standalone/drakbackup:3946 #: standalone/drakbackup:4040 standalone/drakbackup:4057 #: standalone/drakbackup:4075 ugtk2.pm:506 #, c-format msgid "Next" msgstr "Næsta" #: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:385 #, c-format msgid "Advanced" msgstr "Ítarlegra" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Hér er listi af núverandi Linux disksneiðum sem fundust á harða disknum.\n" "Þú getur haldið þeim stillingum sem stungið er upp á, því þau eru nokkuð\n" "skynsamleg fyrir flestar uppsetningar. Ef þú gerir einhverjar breytingar, " "þá\n" "verður þú að minnsta kosti að skilgreina rótarsneið (\"/\"). Ekki velja of " "litla\n" "disksneið þi þá munt þú ekki geta sett up nægan hugbúnað. Ef þú vilt geyma\n" "gögnin þín á annari disksneið, þá verður þú einnig að búa til \"/home\"\n" "disksneið (aðeins mögulegt ef þú hefur fleiri en eina sneið tiltæka).\n" "\n" "Hver sneið á listanum inniheldur \"Nafn\", \"Diskrýmd\".\n" "\n" "\"Nafn\" er byggt upp af: \"harðdisktegund\", \"harðdisknúmer\",\n" "\"disksneið\" (t.d., \"hda1\").\n" "\n" "\"Harðdisktegund\" er \"hd\" ef harði diskurinn er stýrt með IDE stýringu " "og\n" "\"sd\" ef það er SCSI harður diskur.\n" "\n" "\"Harðdisknúmer\" er alltaf bókstafur eftir \"hd\" eða \"sd\". Fyrir IDE\n" "harða diska:\n" "\n" " * \"a\" þýðir \"aðal (master) diskur á fyrstu IDE stýringu\";\n" "\n" " * \"b\" þýðir \"auka (slave) diskur fyrstu IDE stýringu\";\n" "\n" " * \"c\" þýðir \"aðal (master) diskur á annari IDE stýringu\";\n" "\n" " * \"d\" þýðir \"auka (slave) diskur annari IDE stýringu\";\n" "\n" "Á SCSI hörðum diskum, þýðir \"a\" \"lægsta SCSI ID\", \"b\" þýðir\n" "\"næst-lægsta SCSI ID\", o.s.frv." #: help.pm:85 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "Mandrakelinux uppsetningunni er dreift á nokkra geisladiska. Ef valinn\n" "pakki er á öðrum geisladiski, þá mun DrakX spýta út núverandi diski\n" "og biðja þig um að setja inn rétta diskinn. Ef þú hefur ekki rétta diskinn " "við\n" "hendina, smelltu þá á \"%s\", viðkomandi pakkar verða þá ekki\n" "settir upp." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "Nú er tími til að skilgreina hvaða forrit þú vilt að séu sett upp á kerfinu " "þínu.\n" "Það eru þúsundir pakka til fyrir Mandrakelinux, og til að einfalda\n" "umsjón pakkanna hafa þeir verið flokkaðir í hópa af svipuðum forritum.\n" "\n" "Mandrakelinux skiptir pökkunum í fjóra flokka. Þú getur blandað saman\n" "pökkum úr mismunandi flokkkum svo að ``Vinnustöðvar'' uppsetning\n" "getur innihaldið forrit úr ``Miðlara'' flokknum.\n" "\n" " * \"%s\": ef þú hefur í hyggju að nota vélina þína sem vinnustöð veldu\n" "einn eða fleiri flokka úr vinnustöðvahópunum.\n" "\n" " * \"%s\": ef þú hefur í hyggju að nota vélina þína fyrir forritun veljið " "viðeigandi\n" "hópa úr þeim flokki. Hinn sérstaki \"LSB\" hópur mun setja vélina þína upp\n" "þannig að hún sé eins samhæfð og mögulegt er við \"Linux Standard Base" "\"skilgreiningarnar.\n" "\n" " Sé \"LSB\" hópurinn valinn, verður \"2.4\" kjarninn einnig settur inn í " "stað\n" "hins sjálfgefna kjarna \"2.6\". Þetta er til að tryggja 100%%-LSB samhæfni\n" "kerfisins. En þó að þú veljir ekki hinn sérstaka \"LSB\" hóp, þá munt þú\n" "samt vera með kerfi sem er næstum því 100%% LSB-samhæft.\n" "\n" " * \"%s\": ef vélin þín á að vera miðlari veldu þær þjónustur sem þú\n" "vilt að settar séu settar upp á tölvunni þinni.\n" "\n" " * \"%s\": Hér getur þú valið hvaða grafíska gluggaumhverfi þú vilt hafa " "uppsett.\n" "Að minnsta kosti eitt umhverfi verður að vera valið ef þú vilt hafa " "grafískt\n" "gluggaumhverfi uppsett.\n" "\n" "Ef þú færir músabendilinn yfir hópnafn þá kemur stutt skýring á þeim hóp.\n" "\n" "Þú getur krossað við \"%s\" reitinn, ef þú ert kunnugur pökkunum sem eru\n" "í boði, eða þú vilt hafa heildarstjórn á pökkum sem verða settir inn.\n" "\n" "Ef þú byrjar uppsetninguna í \"%s\" ham, þá getur þú afvalið alla hópa\n" "og varnað innsetningu nýrra pakka. Þetta er nytsamlegt í því tilfelli\n" "ef þörf er á að gera við eða uppfæra núverandi kerfi.\n" "\n" "Ef þú afvelur alla hópa þegar þú setur upp venjulega uppsetningu (en ekki\n" "uppfærslu), þá birtist gluggi sem býður aukavalkosti fyrir " "lágmarksuppsetningu:\n" "\n" " * \"%s\": setur upp lágmarksumhverfi til að geta keyrt grafískt " "gluggakerfi.\n" "\n" " * \"%s\": setur up lágmarksumhverfi og nauðsynlegustu tól og handbækur\n" "þeirra. Þessi uppsetning er góð grunn uppsetning fyrir miðlara.\n" "\n" " * \"%s\": setur upp lágmarksumhverfi sem nauðsynlegt er til að fá\n" "keyrandi Linux kerfi með þessari uppsetningu er ekkert gluggaumhverfi.\n" "Heildarstærð uppsetningarinnar er um 65 megabæti." #: help.pm:146 share/compssUsers.pl:23 #, c-format msgid "Workstation" msgstr "Vinnustöð" #: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 #: share/compssUsers.pl:164 #, c-format msgid "Development" msgstr "Forritun" #: help.pm:146 share/compssUsers.pl:144 #, c-format msgid "Graphical Environment" msgstr "Grafískt umhverfi" #: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "Val á einstökum pökkum" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Uppfæra" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "Með X" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "Með grunn handbókum" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Alger lágmarksuppsetning" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "Ef þú velur að setja pakkana inn handvirkt, þá mun uppsetningarforritið\n" "birta tré sem inniheldur alla pakkana flokkaða í hópa og undirhópa. Meðan\n" "þú flakkar um tréð getur þú valið heila hópa, undirhópa eða einstaka pakka.\n" "\n" "Í hvert sinn er þú velur pakka í trénu mun lýsing birtast til hægri til að " "sýna\n" "þér hlutverk þess forritapakka.\n" "\n" "!! Ef miðlara-pakki hefur verið valinn, annað hvort af því að þú valdir " "stakan\n" "pakka eða hann var hluti af hóp, verður þú beðinn um að staðfesta að\n" "þú viljir fá þessa miðlara uppsetta. Sjálfgefið mun Mandrakelinux ræsa " "allar\n" "uppsettar þjónustur og miðlara við kerfisræsingu. Jafnvel þó að þeir séu\n" "öruggir og engar þekktar villur þegar kerfinu var dreift þá er möguleiki að\n" "öryggisholur hafi uppgötvast eftir að gengið var frá þessari útgáfu af\n" "Ef þú veist ekki hvað tiltekin þónusta á að gera eða afhverju hún er sett " "inn,\n" "smelltu þá á \"%s\". Ef þú smellir á \"%s\" verða þjónusturnar settar inn\n" "og þær verða ræstar sjálfkrafa þegar tölvan ræsir !!\n" "\n" "\"%s\" valkosturinn er notaður til að aftengja \n" "viðvörunarglugga sem birtist í hvert sinn er uppsetningarforritið finnur út\n" "að það þurfi að aukalega að setja inn pakka sem eru forsenda " "uppsetningarinnar.\n" "Sumir pakkar eru tengdir öðrum og uppsetning eins pakka getur krafist að\n" "annar pakki sé settur inn fyrst. Uppsetningarforritið getur ákvarðað hvaða\n" "pakkar eru tengdir og séð um að uppsetningin verði rétt.\n" "\n" "Litla disklingatáknmyndin á enda listans leyfir þér að hlaða inn pakkalista\n" "frá fyrri uppsetningu. Þetta er hagkvæmt ef þú þarft að setja upp nokkrar\n" "vélar eins. Ef þú smellir á þessa táknmynd verður þú beðinn um að setja\n" "inn diskling sem búinn var til í lok fyrri uppsetningar. Sjá síðar við lok\n" "uppsetningar um hvernig á a' búa til slíkan diskling." #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792 #: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508 #: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255 #: ugtk2.pm:899 wizards.pm:156 #, c-format msgid "No" msgstr "Nei" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149 #: modules/interactive.pm:71 printer/printerdrake.pm:736 #: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288 #: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 #: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899 #: wizards.pm:156 #, c-format msgid "Yes" msgstr "Já" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "Uppfylla forkröfur sjálfvirkt" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": smellir þú á \"%s\" hnappinn mun það ræsa prentara-" "uppsetningarálfinn\n" "Skoðið viðeigandi kafla í ``Starter Guide'' varðandi meiri upplýsingar um " "hvernig\n" "á að setja upp nýjan prentara. Viðmótið sem sýnt er í handbókinni okkar er\n" "svipað því sem er notað í uppsetningarforritinu." #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607 #: standalone/drakbackup:2333 standalone/drakbackup:2337 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #, c-format msgid "Configure" msgstr "Stilla" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Þessi gluggi er notaður til að velja hvaða þjónustur eru ræstar við ræsingu " "tölvu.\n" "\n" "DrakX mun sýna lista yfir allar tiltækar þjónustur í núverandi uppsetningu.\n" "Skoðið hverja þeirra vandlega og afveljið þær sem ekki er þörf á við " "ræsingu.\n" "\n" "Stutt lýsing verður birt um hverja þjónustu þegar hún er valin. Ef þú ert " "ekki viss\n" "um hvort þjónusta er nauðsynleg eða ekki þá er öruggara að nota sjálfgefið " "val.\n" "\n" "!! Farðu mjög varlega á þessu stigi ef þú ætlar að nota tölvuna þína sem " "miðlara.\n" "Þú vilt seennilega ekki ræsa neinar þjónustur sem ekki er þörf á.\n" "Vinsamlega mundu ap sumar þjónustur geta verið hættulegar ef þær eru virkar\n" "á miðlara. Almennt talað, ræstu aðeins þær sem þú raunverulega þarft. !!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" "GNU/Linux notar GMT (Greenwich Mean Time) sem innri tíma og breytir honum\n" "í staðartíma eftir völdu tímabelti. Ef klukkan á móðurborðinu er stillt á " "staðartíma,\n" "þá gætir þú þurft að aftengja þetta með því að afvelja reitinn\n" "\"%s\", sem segir GNU/Linux kerfinu að vélarklukkan og kerfisklukkan séu\n" "á sama tímabelti. þetta er gagnlegt ef vélin hýsir annað stýrikerfi.\n" "\n" "\"%s\" valreiturinn mun stilla klukkuna sjálfkrafa með því að tengjast " "tímamiðlara\n" "um internetið. Til að þetta sé virkt þá verður þú að hafa uppsetta " "internettengingu.\n" "Við mælum með að þú veljir tímamiðlara sem er nálægt þér. Þessi valkostur\n" "mun í raun setja upp tímamiðlara á vélinni sem þú getur notað af öðrum " "vélum\n" "á staðarnetinu." #: help.pm:217 install_steps_interactive.pm:873 #, c-format msgid "Hardware clock set to GMT" msgstr "Tölvuklukkan stillt á GMT" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "Sjálfvirk tímastilling" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Grafískt kort\n" "\n" " Uppsetningarforritið mun venjulega sjálfkrafa finna og stilla grafísk " "skjákort\n" "sem eru á vélinni þinni. Ef þetta er ekki rétt þá getur þú valið af þessum " "lista\n" "það kort sem þú vilt láta setja upp.\n" "\n" " Í því tilviki að mismunandi miðlarar eru til fyrir kortið þitt, með eða " "án\n" "þrívíddarhraðals, þá verður þú beðinn um að velja þann miðlara sem best\n" "hentar þínum þörfum." #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Skjár\n" "\n" " Venjulega mun uppsetningarforritið finna tengda skjái sjálfkrafa og " "setja\n" "upp viðeigandi stillingar. Ef valið er ekki rétt getur þú valið skjá af " "þessum\n" "lista skjáinn sem er tengdur þinni tölvu." #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Upplausn\n" "\n" " Hér getur þú valið upplausn og litadýpt sem eru mögulegir fyrir þinn " "vélbúnað.\n" "Veldu þann sem best hæfir þínum þörfum (þú getur breytt þessum stillingum\n" "eftur uppsetningu). Dæmi um valda uppsetningu er sýnt á skjámyndinni." #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "Í því tilviki að mismunandi miðlarar eru til fyrir kortið þitt, með eða án\n" "þrívíddarhraðals, þá verður þú beðinn um að velja þann miðlara sem best\n" "hentar þínum þörfum." #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Nota laust pláss" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Nota núverandi disksneið" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Nota laust pláss á Windows disksneiðinni" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Eyða öllu á disknum" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Fjarlægja Windows" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "Sérsniðin disksneiðing" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "Búa til diskling fyrir sjálfvirka uppsetningu" #: help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Replay" msgstr "Spila aftur" #: help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Automated" msgstr "Sjálfvirkt" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Save packages selection" msgstr "Vista val á pakkahóp" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" #: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425 #: interactive/newt.pm:316 printer/printerdrake.pm:3579 #: standalone/drakTermServ:361 standalone/drakbackup:3906 #: standalone/drakbackup:3945 standalone/drakbackup:4056 #: standalone/drakbackup:4071 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "Fyrra" #: help.pm:434 #, c-format msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:387 #: install_steps_interactive.pm:156 standalone/drakbackup:4103 #, c-format msgid "Install" msgstr "Innsetning" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "Öryggisfulltrúi" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" # ## skrytid #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "Sjálfvirk tenging aukatækja" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Víxla milli venjulegs/sérfræðings-hams" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Fleiri en ein Microsoft disksneið hefur fundist á harða disknum.\n" "Vinsamlega veldu hverja þeirra þú vilt breyta stærðinni á til að geta sett " "upp\n" "nýja Mandrakelinux stýrikerfið.\n" "\n" "Hver sneið á listanum inniheldur \"Linux nafn\", \"Windows nafn\" \"Diskrýmd" "\".\n" "\n" "\"Nafn\" er byggt upp af: \"harðdisktegund\", \"harðdisknúmer\",\n" "\"disksneið\" (t.d., \"hda1\").\n" "\n" "\"Harðdisktegund\" er \"hd\" ef harði diskurinn er stýrt með IDE stýringu " "og\n" "\"sd\" ef það er SCSI harður diskur.\n" "\n" "\"Harðdisknúmer\" er alltaf bókstafur eftir \"hd\" eða \"sd\". Fyrir IDE\n" "harða diska:\n" "\n" " * \"a\" þýðir \"aðal (master) diskur á fyrstu IDE stýringu\";\n" "\n" " * \"b\" þýðir \"auka (slave) diskur fyrstu IDE stýringu\";\n" "\n" " * \"c\" þýðir \"aðal (master) diskur á annari IDE stýringu\";\n" "\n" " * \"d\" þýðir \"auka (slave) diskur annari IDE stýringu\";\n" "\n" "Á SCSI hörðum diskum, þýðir \"a\" \"lægsta SCSI ID\", \"b\" þýðir\n" "\"næst-lægsta SCSI ID\", o.s.frv.\n" "\n" "\"Windows nafn\" er bókstafurinn á harða disknum eins og það sést undir " "Windows (fyrsti\n" "diskurinn eða sneiðin er kölluð \"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, c-format msgid "Espanol" msgstr "" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "Með skrunhermi" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Veldu tengið sem þú vilt nota. Tengið COM1 í MS Windows er kallað\n" "ttyS0 í GNU/Linux, COM2 er ttyS1, o.s.frv." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "auðkenning" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 #, c-format msgid "pdq" msgstr "" #: help.pm:765 printer/cups.pm:115 printer/data.pm:118 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Þungt" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX mun fyrst leita að öllum IDE tækjum í tölvunni. Síðan er einnig\n" "leitað að einu eða fleiri SCSI kortum í tölvunni. Ef SCSI kort finnst þá " "mun\n" "DrakX mun sjálfkrafa setja inn rekil fyrir kortið.\n" "\n" "Af því að sjálfvirk vélbúnaðarleit er ekki gallalaus, þá finnur DrakX " "kannski\n" "ekki diskana í tölvunni. Ef svo er þá verður þú að skilgreina vélbúnaðinn " "handvirkt.\n" "\n" "Ef þú þarft að skilgreina handvirkt PCI SCSI stýringu, þá mun DrakX spyrja\n" "hvort þú viljir tilgreina viðföng fyrir kortið. Þú ættir að leyfa DrakX að " "kanna\n" "vélbúnaðinn til að stilla kortið sjálfkrafa. Oftast kemst DrakX áfram án " "aukalegra\n" "viðfanga.\n" "\n" "Ef DrakX finnur ekki hvaða breytur á að senda til kortsins þá verður þú að\n" "stilla kortið og viðföng þess handvirkt." #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": ef hljóðkort finnst í tölvunni. þá verða upplýsingar um það sýndar " "hér\n" "Ef þú sérð að hljóðkortið er ekki það sem er raunverulega í tölvunni, þá\n" "getur þú smellt á hnappinn hér og bent á annan rekil." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1005 #: install_steps_interactive.pm:1022 #, c-format msgid "Sound card" msgstr "Hljóðkort" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "As a review, DrakX will present a summary of various information it has\n" "about your system. Depending on your installed hardware, you may have some\n" "or all of the following entries. Each entry is made up of the configuration\n" "item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to change\n" "that.\n" "\n" " * \"%s\": Athuga lyklaborðvörpun og breyta henni ef þörf krefur.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your\n" "country is not in the first list shown, click the \"%s\" button to get\n" "the complete country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the\n" "country you have chosen. You can click on the \"%s\" button here if\n" "this is not correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is\n" "displayed here. If you notice the sound card displayed is not the one that\n" "is actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed\n" "here. If you have a TV card and it is not detected, click on \"%s\"\n" "to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical\n" "interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n" "you, click on \"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": Ef þú vilt stilla Internet eða aðrar nettengingar núna.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": hér getur þú endurstillt öryggisþrep sem þú settir áður\n" "í fyrra þrepi ().\n" "\n" " * \"%s\": ef þú ætlar að tengja vélina þína Internetinu, þá er\n" "góð hugmynd að vernda vélina þína með því að setja upp eldvvegg.\n" "Lestu viðeigandi kafla í um uppsetningu eldveggs í ``Starter Guide''.\n" "\n" " * \"%s\": ef þú villt breyta stillingum ræsistjóra, smelltu á\n" "þennan hnapp. Þetta ætti þó ekki að gera nema af kunnugum.\n" "\n" " * \"%s\": hér getur þú fínstillt hvaða þjónustur verða ræstar á\n" "tölvunni þinni. Ef þú ætlar að nota þessa vél sem miðlara þá er góð\n" "hugmynd að fara vel yfir þessa uppsetningu." #: help.pm:855 install_steps_interactive.pm:964 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Tímabelti" #: help.pm:855 install_steps_interactive.pm:1038 #, c-format msgid "TV card" msgstr "Sjónvarpskort" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN spjald" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Grafískt viðmót" #: help.pm:855 install_any.pm:1528 install_steps_interactive.pm:1056 #: standalone/drakbackup:2036 #, c-format msgid "Network" msgstr "Net" #: help.pm:855 install_steps_interactive.pm:1071 #, c-format msgid "Proxies" msgstr "Sel" #: help.pm:855 install_steps_interactive.pm:1082 #, c-format msgid "Security Level" msgstr "Öryggisþrep" #: help.pm:855 install_steps_interactive.pm:1096 #, c-format msgid "Firewall" msgstr "Eldveggur" #: help.pm:855 install_steps_interactive.pm:1110 #, c-format msgid "Bootloader" msgstr "Ræsistjóri" #: help.pm:855 install_steps_interactive.pm:1123 services.pm:193 #, c-format msgid "Services" msgstr "Þjónustur" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Veldu harða diskinn sem þú vilt hreinsa allt af til að setja upp nýja\n" "Mandrakelinux disksneið. Varúð, öllum gögnum á disknum verður\n" "eytt, og það er ekki hægt að sækja þau aftur!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Smelltu á \"%s\" ef þú vilt eyða öllum gögnum og disksneiðum\n" "á þesum harða disk. Varúð! Eftir að þú hefur smellt á \"%s\", getur\n" "þú ekki endurheimt nein gögn eða disksneiðar sem eru nú á þessum diski,\n" "Þar með talin Windows gögn.\n" "\n" "Smelltu á \"%s\" til að stöðva þessa aðgerð án þess að tapa gögnum\n" "og disksneiðum sem nú eru á þessum harða diski." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Næsta ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Fyrra" #: install2.pm:117 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: install2.pm:167 #, c-format msgid "You must also format %s" msgstr "Þú verður einnig að forsníða %s" #: install_any.pm:376 #, c-format msgid "Do you have further supplementary media?" msgstr "Hefur þú einhverja aðra aukamiðla?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:379 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "Eftirfarandi miðlar hafa fundist og verða notaðir við uppsetningu: %s.\n" "\n" "\n" "Eru einhverjir aðrir miðlar sem þarf að stilla?" #: install_any.pm:388 printer/printerdrake.pm:2929 #: printer/printerdrake.pm:2936 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "Geisladrif" #: install_any.pm:388 #, c-format msgid "Network (http)" msgstr "Net (http)" #: install_any.pm:388 #, c-format msgid "Network (ftp)" msgstr "Net (ftp)" #: install_any.pm:436 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "Fann enginn tæki" #: install_any.pm:440 #, c-format msgid "Insert the CD" msgstr "" #: install_any.pm:445 #, c-format msgid "Unable to mount CD-ROM" msgstr "Get ekki tengt geisladrif" #: install_any.pm:468 #, c-format msgid "Insert the CD 1 again" msgstr "" #: install_any.pm:478 install_any.pm:482 #, c-format msgid "URL of the mirror?" msgstr "" #: install_any.pm:515 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "" "Finn ekki pakkalistaskrá á þessum spegli. Athugaðu hvort staðsetningin sé " "rétt." #: install_any.pm:633 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" #: install_any.pm:652 #, c-format msgid "Copying in progress" msgstr "Afrritun í gangi" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:783 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Þú hefur valið eftirfarandi miðlara: %s\n" "\n" "\n" "Þessir miðlarar eru ræstir sjálfkrafa við ræsingu kerfis. Þeir hafa ekki " "neina þekkta\n" "öryggisaðvaranir, en nýir kunna aðð hafa fundist. Í því tilviki verður þú að " "uppfæra\n" "eins fljótt og hægt er.\n" "\n" "\n" "Vilt þú raunverulega setja upp þessa miðlara?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:806 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Eftrfarandi pakkar verða fjarlægðir til að uppfærsla takist eðlilega: %s\n" "\n" "\n" "Viltu í alvöru fjarlægja þessa pakka?\n" #: install_any.pm:1214 partition_table.pm:603 #, c-format msgid "Error reading file %s" msgstr "Villa við lestur úr skránni %s" #: install_any.pm:1425 #, c-format msgid "The following disk(s) were renamed:" msgstr "Eftirfarandi diskar voru endurnefndir:" #: install_any.pm:1427 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1465 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi " "á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins" #: install_any.pm:1509 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1509 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1509 #, c-format msgid "NFS" msgstr "NFS" #: install_any.pm:1532 #, c-format msgid "Please choose a media" msgstr "Vinsamlega veldu miðil" #: install_any.pm:1564 #, c-format msgid "Bad media %s" msgstr "Gallaður miðill %s" #: install_any.pm:1576 #, c-format msgid "File already exists. Overwrite it?" msgstr "Skráin er þegar til. Skrifa yfir hana?" #: install_any.pm:1627 #, c-format msgid "Can not make screenshots before partitioning" msgstr "Get ekki tekið skjámyndir fyrr en disksneiðar hafa verið skilgreindar" #: install_any.pm:1634 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Skjámyndir verða tiltækar eftir uppsetningu í %s" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Kerfisuppsetning" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Kerfisstillingar" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Þú verður að hafa rótarsneið fyrir Linux. Búðu því annaðhvort\n" "til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n" "Veldu síðan ``Tengipunktur'' og sláðu inn `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Þú hefur enga diskminnis-sneið\n" "\n" "Halda samt áfram?" #: install_interactive.pm:70 install_steps.pm:211 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Þú verður að hafa FAT disksneið tengda í /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Ekki nóg laust pláss til að búa til nýjar disksneiðar" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Nota núverandi disksneiðar" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "það eru engar núverandi disksneiðar til að nota" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Hvaða disksneið vilt þú nota fyrir Linux4Win?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Veldu stærðir" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Stærð rótardisksneiðar í MB: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Stærð diskminnis í MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Hvaða disksneið viltu breyta stærð á?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Reikna stærð Windows disksneiðar" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "AÐVÖRUN\n" "\n" "DrakX ætlar nú að breyta stærð Windows sneiðarinnar. Athugið:\n" "Þetta getur verið hættulegt. Ef þú ert ekki búin(n) að því, þá ættir þú " "fyrst að\n" "hætta við uppsetninguna, keyra \"chkdsk c:\" frá skipanalínunni (DOS)\n" "(Varúð: það er ekki nóg að keyra grafíska forritið \"scandisk\", verið \n" "viss um að nota \"chkdisk\" úr skipanalínunni!),\n" "Þið gætuð einnig keyrt defrag. Endurræsið síðan uppsetninguna\n" "Þú ættir einnig að taka afrit af gögnunum þínum.\n" "Þegar þú ert viss, sláðu á \"Í lagi\" til að halda áfram." #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Hvaða stærð viltu skilja eftir fyrir Windows á" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "disksneið %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Breyta stærð Windows skráarkerfis" # ****************************************** # ***** Byrjaði hérna 4. jan 2000 ******* # *** ATH: Það er sumt eftir fyrir ofan *** # ****************************************** #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Breyting á FAT mistókst: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Fjarlægja Windows(TM)" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Þú hefur meir en einn harðan disk. Hvar viltu setja upp Linux?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "Allar disksneiðar og öll gögn á diski %s tapast" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Nota fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "Get ekki fundið meira pláss fyrir uppsetningu" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "Skipting disks í sneiðar mistókst: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Keyri upp netið" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Keyri niður netið" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" "Til hamingju! Innsetningu er lokið.\n" "Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n" "\n" "\n" "viðbætur og/eða lagfæringar á göllum sem gætu verið til\n" "staðar í þessari útgáfu af Mandrakelinux má finna á \n" "\n" "\n" "%s\n" "\n" "\n" "Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n" "finna í viðeigandi kafla í Official Mandrakelinux User's Guide bókinni." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrakelinux.com/en/101errata.php3" msgstr "http://www.mandrakelinux.com/en/101errata.php3" #: install_steps.pm:246 #, c-format msgid "Duplicate mount point %s" msgstr "%s tengipunktur er nú þegar til" #: install_steps.pm:479 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Sumir mikilvægir pakkar voru ekki uppsettir eðlilega.\n" "Annaðhvort er geisladiskurinn eða drifið skemmt.\n" "Athugaðu geisladiskinn á uppsettri vél með skipuninni\n" "\"rpm -qpl media/main/*.rpm\"\n" #: install_steps.pm:599 #, c-format msgid "No floppy drive available" msgstr "Ekkert disklingadrif aðgengilegt" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Hef skref `%s'\n" #: install_steps_gtk.pm:177 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: install_steps_gtk.pm:224 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "Val á pakkahóp" #: install_steps_gtk.pm:250 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "Heildarstærð: %d / %d MB" #: install_steps_gtk.pm:295 #, c-format msgid "Bad package" msgstr "Skemmdur pakki" #: install_steps_gtk.pm:297 #, c-format msgid "Version: " msgstr "Útgáfa: " #: install_steps_gtk.pm:298 #, c-format msgid "Size: " msgstr "Stærð: " #: install_steps_gtk.pm:298 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:299 #, c-format msgid "Importance: " msgstr "Mikilvægi: " #: install_steps_gtk.pm:332 #, c-format msgid "You can not select/unselect this package" msgstr "Þú getur ekki vali/afvalið þennan pakka" #: install_steps_gtk.pm:336 #, c-format msgid "due to missing %s" msgstr "vegna þess að %s vantar" #: install_steps_gtk.pm:337 #, c-format msgid "due to unsatisfied %s" msgstr "vegna þess að %s vantar" #: install_steps_gtk.pm:338 #, c-format msgid "trying to promote %s" msgstr "reyni að hækka %s" #: install_steps_gtk.pm:339 #, c-format msgid "in order to keep %s" msgstr "til þess að halda %s" #: install_steps_gtk.pm:344 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "Þú getur ekki valið þennan pakka því það er ekki nægilegt pláss" #: install_steps_gtk.pm:347 #, c-format msgid "The following packages are going to be installed" msgstr "Eftirfarandi pakkar verða settir inn" #: install_steps_gtk.pm:348 #, c-format msgid "The following packages are going to be removed" msgstr "Eftirfarandi pakkar verða fjarlægðir" #: install_steps_gtk.pm:372 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Þessi pakki verður að vera uppsettur, þú getur ekki afvalið hann" #: install_steps_gtk.pm:374 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Þú getur ekki afvalið þennan pakka hann er þegar uppsettur" #: install_steps_gtk.pm:377 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "það verður að uppfæra þennan pakka\n" "Ertu viss um að þú viljir afvelja hann?" #: install_steps_gtk.pm:380 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Þú getur ekki afvalið þennan pakka, það verður að uppfæra hann" #: install_steps_gtk.pm:385 #, c-format msgid "Show automatically selected packages" msgstr "Sýna sjálfvirkt valda pakka" #: install_steps_gtk.pm:390 #, c-format msgid "Load/Save selection" msgstr "Sækja/Vista val" #: install_steps_gtk.pm:391 #, c-format msgid "Updating package selection" msgstr "Uppfæri val á pökkum" #: install_steps_gtk.pm:396 #, c-format msgid "Minimal install" msgstr "Minimal uppsetning" #: install_steps_gtk.pm:410 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "Veldu pakkana sem þú vilt setja inn" #: install_steps_gtk.pm:426 install_steps_interactive.pm:706 #, c-format msgid "Installing" msgstr "Set inn" #: install_steps_gtk.pm:433 #, c-format msgid "Estimating" msgstr "Áætla" #: install_steps_gtk.pm:482 #, c-format msgid "No details" msgstr "Engar upplýsingar" #: install_steps_gtk.pm:490 #, c-format msgid "Time remaining " msgstr "Tími eftir " #: install_steps_gtk.pm:497 #, c-format msgid "Please wait, preparing installation..." msgstr "Augnablik, undirbý innsetningu..." #: install_steps_gtk.pm:512 #, c-format msgid "%d packages" msgstr "%d pakkar" #: install_steps_gtk.pm:517 #, c-format msgid "Installing package %s" msgstr "Set inn pakka %s" #: install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 #, c-format msgid "Refuse" msgstr "Neita" #: install_steps_gtk.pm:556 install_steps_interactive.pm:735 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Skiftu um geisladisk!\n" "Vinsamlega settu inn geisladisk merktan \"%s\" í diskdrifið og ýttu á 'Í " "lagi' þegar þú ert búinn.\n" "Ef þú hefur ekki diskinn, ýttu þá að 'Hætta við' til að sleppa uppsetningu " "frá þessum diski." #: install_steps_gtk.pm:571 install_steps_interactive.pm:746 #, c-format msgid "There was an error ordering packages:" msgstr "Það kom upp villa við að raða pökkum:" #: install_steps_gtk.pm:571 install_steps_gtk.pm:575 #: install_steps_interactive.pm:746 install_steps_interactive.pm:750 #, c-format msgid "Go on anyway?" msgstr "Viltu samt halda áfram?" #: install_steps_gtk.pm:575 install_steps_interactive.pm:750 #, c-format msgid "There was an error installing packages:" msgstr "Það kom upp villa við innsetningu pakka:" #: install_steps_gtk.pm:617 install_steps_interactive.pm:920 #: install_steps_interactive.pm:1072 #, c-format msgid "not configured" msgstr "Ekki stillt" #: install_steps_gtk.pm:680 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "Efturfarandi uppsetningarmiðlar hafa fundist.\n" "Ef þú vilt sleppa einhverjum af þeim, þá getur þú afvalið þá núna." #: install_steps_gtk.pm:684 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "Þú hefur val um að afrita innihald geisladiskanna á harða diskinn fyrir " "uppsetningu.\n" "Síðan mun uppsetning halda áfram frá harða disknum og pakkarnir verða " "tilstaðar þegar kerfið er að fullu uppsett." #: install_steps_gtk.pm:686 #, c-format msgid "Copy whole CDs" msgstr "Afrita alla geisladiska" #: install_steps_interactive.pm:85 #, c-format msgid "License agreement" msgstr "Notkunarskilmálar" #: install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "Athugasemdir við útgáfu" #: install_steps_interactive.pm:119 #, c-format msgid "Please choose your keyboard layout." msgstr "Veldu lyklaborðsuppsetningu." #: install_steps_interactive.pm:121 #, c-format msgid "Here is the full list of available keyboards" msgstr "Hér er tæmandi listi af tiltækum lyklaborðum" #: install_steps_interactive.pm:151 #, c-format msgid "Install/Upgrade" msgstr "Innsetning/Uppfærsla" #: install_steps_interactive.pm:152 #, c-format msgid "Is this an install or an upgrade?" msgstr "Er þetta innsetning eða uppfærsla?" #: install_steps_interactive.pm:158 #, c-format msgid "Upgrade %s" msgstr "Uppfæra %s" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "Dulritunarlykill fyrir %s" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "Veldu músartegund." #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Músartengi" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Veldu við hvaða raðtengi músin þín er tengd." #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "Hnappahermir" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "Tveggja hnappa hermir" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "Herma eftir miðhnappi" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Stilli PCMCIA kort..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "Uppsetning IDE" #: install_steps_interactive.pm:256 network/tools.pm:172 #, c-format msgid "No partition available" msgstr "Engin tiltæk disksneið" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "Leita á disksneiðum að tengipunktum" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "Veldu tengipunktana" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Ekki pláss fyrir 1MB ræsigeira! Uppsetning mun halda áfram, en tilað ræsa " "kefið þitt verður þú að búa til ræsidisksneið með DiskDrake" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "Þú þarft að búa til PPC PReP for-ræsingu! Uppsetningin mun halda áfram,en " "til að ræsa kerfið, þarft þú að búa til ræsidisksneið með DiskDrake" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "Veldu þær disksneiðar sem á að forsníða" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "Athuga skemmdar blokkir?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Tókst ekki að athuga skráarkerfi %s. Viltu gera við villurnar? (varúð, þú " "getur tapað gögnum)" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Ekki nægjanlegt diskminni fyrir innsetningu. Bættu við það" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Leita að fáanlegum pökkum og endurbyggi rpm gagnagrunn..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "Leita að fáanlegum pökkum..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "Leita að þegar uppsettum pökkum..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "Leita að pökkum til að uppfæra..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:825 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Það er ekki nægilegt pláss á kerfinu þínu fyrir uppsetningu eða uppfærslu (%" "d > %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "Álag" #: install_steps_interactive.pm:497 standalone/drakbackup:3924 #: standalone/drakbackup:3997 standalone/logdrake:173 #, c-format msgid "Save" msgstr "Vista" #: install_steps_interactive.pm:505 #, c-format msgid "Bad file" msgstr "Gölluð skrá" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "Valin stærð er stærri en tiltækt pláss" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "Tegund uppsetningar" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Þú hefur ekki valið neina pakkahópa.\n" "Veldu lágmarksuppsetningu sem þú vilt:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "Með grunn handbókum (mælt með!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Alger lágmarksuppsetning (ekkert urpmi)" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Allt" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Ef þú hefur alla geisladiskana í listanum hér að neðan smelltu þá á 'Í " "lagi'\n" "Ef þú hefur engan þessara geisladiska smelltu þá á 'Hætta'\n" "Ef einhverja diska vantar, afveldu þá og smelltu síðan á 'Í lagi'." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-ROM merkt \"%s\"" #: install_steps_interactive.pm:706 #, c-format msgid "Preparing installation" msgstr "Undirbý innsetningu" #: install_steps_interactive.pm:715 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Set inn pakka %s\n" "%d%%" #: install_steps_interactive.pm:764 #, c-format msgid "Post-install configuration" msgstr "Lokauppsetning" #: install_steps_interactive.pm:770 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Settu uppfærslu-diskling í drif %s" #: install_steps_interactive.pm:799 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "Þú hefur nú möguleika á að sækja uppfærða pakka. Þessir pakkar\n" "hafa verið uppfærðir eftir að dreifingin ver send úr húsi. Þeir kunna\n" "að innihalda villuleiðréttingar eða öryggisuppfærslur.\n" "\n" "Til að sækja þessa pakka þá verður þú að vera tengdur Internetinu.\n" "\n" "Viltu sækja uppfærslurnar?" #: install_steps_interactive.pm:820 #, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "" "Hef samband við Mandrakelinux vefinn til að sækja lista yfir fáanlega " "spegla..." #: install_steps_interactive.pm:839 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka..." #: install_steps_interactive.pm:843 #, c-format msgid "Unable to contact mirror %s" msgstr "Get ekki tengst spegilvél %s" #: install_steps_interactive.pm:843 #, c-format msgid "Would you like to try again?" msgstr "Viltu reyna aftur?" #: install_steps_interactive.pm:869 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Hvert er þitt tímabelti?" #: install_steps_interactive.pm:874 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Sjálfvirk tímastilling (með NTP)" #: install_steps_interactive.pm:882 #, c-format msgid "NTP Server" msgstr "NTP þjónn" #: install_steps_interactive.pm:924 steps.pm:30 #, c-format msgid "Summary" msgstr "Yfirlit" #: install_steps_interactive.pm:937 install_steps_interactive.pm:945 #: install_steps_interactive.pm:963 install_steps_interactive.pm:970 #: install_steps_interactive.pm:1122 services.pm:133 #: standalone/drakbackup:1599 #, c-format msgid "System" msgstr "Kerfi" #: install_steps_interactive.pm:977 install_steps_interactive.pm:1004 #: install_steps_interactive.pm:1021 install_steps_interactive.pm:1037 #: install_steps_interactive.pm:1048 #, c-format msgid "Hardware" msgstr "Vélbúnaður" #: install_steps_interactive.pm:983 install_steps_interactive.pm:992 #, c-format msgid "Remote CUPS server" msgstr "Fjarlægur CUPS þjónn" #: install_steps_interactive.pm:983 #, c-format msgid "No printer" msgstr "Enginn prentari" #: install_steps_interactive.pm:1025 #, c-format msgid "Do you have an ISA sound card?" msgstr "Er kannski ISA hhljóðkort í vélinni?" #: install_steps_interactive.pm:1027 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "Keyrðu \"alsaconf\" eða \"sndconfig\" eftir uppsetningu til að stilla " "hljóðkortið þitt" #: install_steps_interactive.pm:1029 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Ekkert hljóðkort fannst reyndu að keyra \"harddrake\" eftir uppsetningu" #: install_steps_interactive.pm:1049 #, c-format msgid "Graphical interface" msgstr "Grafískt viðmót" #: install_steps_interactive.pm:1055 install_steps_interactive.pm:1070 #, c-format msgid "Network & Internet" msgstr "Staðarnet og Internet" #: install_steps_interactive.pm:1072 #, c-format msgid "configured" msgstr "Uppsett" #: install_steps_interactive.pm:1081 install_steps_interactive.pm:1095 #: steps.pm:20 #, c-format msgid "Security" msgstr "Öryggi" #: install_steps_interactive.pm:1100 #, c-format msgid "activated" msgstr "Virk" #: install_steps_interactive.pm:1100 #, c-format msgid "disabled" msgstr "óvirkt" #: install_steps_interactive.pm:1109 #, c-format msgid "Boot" msgstr "Ræsing" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1113 #, c-format msgid "%s on %s" msgstr "%s á %s" #: install_steps_interactive.pm:1127 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Þjónustur: %d ræstar af %d skráðum" #: install_steps_interactive.pm:1137 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Þú hefur ekki sett upp X, ertu viss um að þú viljir þetta?" #: install_steps_interactive.pm:1217 #, c-format msgid "Preparing bootloader..." msgstr "Set upp ræsistjórann..." #: install_steps_interactive.pm:1227 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" #: install_steps_interactive.pm:1233 #, c-format msgid "Do you want to use aboot?" msgstr "Viltu nota aboot?" #: install_steps_interactive.pm:1236 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Villa við uppsetningu á aboot, \n" "reyna að þvinga uppsetningu, þó það eyðileggi fyrstu fyrstu disksneiðina?" #: install_steps_interactive.pm:1257 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "Í þessu öryggisþrepi er aðgangur að windows disksneiðum takmarkað við " "kerfisstjóra." #: install_steps_interactive.pm:1286 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Settu tóman diskling í drif %s" #: install_steps_interactive.pm:1291 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Vinsamlega settu inn annan diskling fyrir rekla" #: install_steps_interactive.pm:1293 #, c-format msgid "Creating auto install floppy..." msgstr "Bý til diskling fyrir sjálfvirka uppsetningu..." #: install_steps_interactive.pm:1305 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Sum skref eru ennþá eftir.\n" "\n" "Viltu virkilega hætta núna?" #: install_steps_interactive.pm:1321 #, c-format msgid "Generate auto install floppy" msgstr "Búa til diskling fyrir sjálfvirka uppsetningu" #: install_steps_interactive.pm:1323 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Uppsetningu er hægt að hafa algerlega sjálfvirka,\n" "í því tilfelli tekur uppsetningin yfir harða diskinn!!\n" "(þetta er ætlað til uppsentingar á annari tölvu).\n" "\n" "Þú vilt kannski endurspila uppsetninguna\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Mandrakelinux innsetning %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / milli hluta | velur | næsti skjár " #: interactive.pm:184 #, c-format msgid "Choose a file" msgstr "Veldu skrá" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakbackup:1540 #: standalone/drakfont:593 standalone/drakfont:660 standalone/drakups:297 #: standalone/drakups:357 standalone/drakups:377 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Add" msgstr "Bæta við" #: interactive.pm:309 interactive/gtk.pm:489 #, c-format msgid "Modify" msgstr "Breyta" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakups:299 #: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Remove" msgstr "Fjarlægja" #: interactive.pm:386 #, c-format msgid "Basic" msgstr "Einfalt" #: interactive.pm:424 interactive/newt.pm:317 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "Ljúka" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "Áfram" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Rangt val, reyndu aftur\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Þitt val? (sjálfgefið %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Svæði sem þú verður að fylla:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Þitt val? (0/1, sjálfgefið %s') " #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Hnappur %s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Viltu smella á þennan hnapp?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Þitt val? (sjálfgefið %s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " sláið inn 'void' fyrir autt val" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Það er úr mörgu að velja (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Athugið, merki breyttist:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Endursenda" #: keyboard.pm:170 keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Tékkneskt (QWERTZ)" #: keyboard.pm:171 keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Þýskt" #: keyboard.pm:172 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:173 keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Spænskt" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Finnskt" #: keyboard.pm:175 keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Franskt" #: keyboard.pm:176 keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Norskt" #: keyboard.pm:177 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Pólskt" #: keyboard.pm:178 keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Rússneskt" #: keyboard.pm:180 keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Sænskt" #: keyboard.pm:181 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "Breskt lyklaborð" #: keyboard.pm:182 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "Bandarískt lyklaborð" #: keyboard.pm:184 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Albanskt" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Armenskt (gamalt)" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Armenskt (hljóðfræðilegt)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Armenskt (hljóðfræðilegt)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Arabískt" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Adzerbadjanskt (latneskt)" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Belgískt" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Bengalskt (Inscript uppsetn.)" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Bengalskt (Probhat uppsetn.)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Búlgarskt (hljóðfræðilegt)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Búlgarskt (BDS)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Brasilískt (ABNT 2)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Bosnískt" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Hvít-Rússneskt" #: keyboard.pm:199 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Svissneskt (þýsk uppsetn.)" #: keyboard.pm:201 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Svissneskt (frönsk uppsetn.)" #: keyboard.pm:203 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Cherokee syllabics" #: keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Tékkneskt (QWERTY)" #: keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Þýskt (engir dauðir lyklar)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Devanagari" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Danskt" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (US)" #: keyboard.pm:212 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (Esperanto)" #: keyboard.pm:214 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (Franskt)" #: keyboard.pm:216 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (UK)" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (Norskt)" #: keyboard.pm:219 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (Pólskt)" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (Sænskt)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Dzongkha/Tíbetskt" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Eistlenskt" #: keyboard.pm:226 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Færeyskt" #: keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Georgískt (\"Rússneskt\")" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Georgískt (\"Latínu\")" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Grískt" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "Grískt (Hljóð)" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "Gujarati" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "Gurmukhi" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Ungverskt" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Króatískt" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "Írskt" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Ísraelskt" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Ísraelískt (hljóðfr.)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Íranskt" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Íslenskt" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Ítalskt" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "Inuktitut" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Japanskt 106 lykla" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Kanada" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "Kóreskt lyklaborð" #: keyboard.pm:254 #, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Kúrdískt (arabískt letur)" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "Kírgískt" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Suður amerískt" #: keyboard.pm:257 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Laotian" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "Litháenískt AZERTY (gamalt)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Litháenískt AZERTY (nýtt)" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Litháenískt \"töluröð\" QWERTY" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Lettneska" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Malayalam" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Makedónískt" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "Myanmar (Búrmenskt)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "Mongólskt (kýrílskt)" #: keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "Maltneskt (UK)" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "Maltneskt (US)" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Hollenskt" #: keyboard.pm:276 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Oriya" #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Pólskt (qwerty)" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Pólskt (qwertz)" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Pashto" #: keyboard.pm:281 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Portúgalskt" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Kanadískt (Quebec)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Rúmenskt (qwertz)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Rúmenskt (qwerty)" #: keyboard.pm:288 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Rússneskt (hljóðfræðilegt)" #: keyboard.pm:289 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Saami (Norskt)" #: keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "Samískt (sænsk/finnskt)" #: keyboard.pm:292 #, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Sindhi" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Slóvenskt" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Slóvakískt (QWERTZ)" #: keyboard.pm:296 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Slóvakískt (QWERTY)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "Serbneskt (kýrílskt)" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Sýrland" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Sýrlenskt (hljóðfræðilegt)" #: keyboard.pm:301 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Telugu" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "Tamílskt (ISCII uppsetning)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Tamílskt (ritvélaruppsetning)" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Tælenskt (Kedmanee)" #: keyboard.pm:306 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Tælenskt (TIS-820)" #: keyboard.pm:308 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Tælenskt (Pattachote)" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (+latin/arabic)" msgstr "Tifinagh (+latneskt/arabískt)" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Tajik lyklaborð" #: keyboard.pm:315 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Túrkmenískt" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Tyrkneskt (hefðbundið \"F\" módel)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Tyrkneskt (nútíma \"Q\" módel)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Úkraínskt" #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Urdu lyklaborð" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "Bandarískt (alþjóðlegt)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "Úsbeskt (kýrílskt)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Víetnamskt \"töluröð\" QWERTY" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Júgoslavneskt (Latínu upps.)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "Hægri Alt lykill" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "Báðir Shift lyklar samtímis" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Ctrl og Shift lyklar samtímis" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock lykill" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Shift og CapsLock lyklar samtímis" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl og Alt lyklar samtímis" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt og Shift lyklar samtímis" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"Menu\" lykill" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "Vinstri \"Windows\" lykill" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "Hægri \"Windows\" lykill" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "Báðir Ctrl lyklar samtímis" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "Báðir Alt lyklar samtímis" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "Vinstri Shift lykill" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "Hægri Shift lykill" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "Vinstri Alt lykill" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "Vinstri Ctrl lykill" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "Hægri Ctrl lykill" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Hér getur þú valið lykla eða lyklasamsetningar sem skipta \n" "milli mismunandi lykilboðsuppsetninga (t.d íslenskt/enskt)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Þessar uppsetningar verða virkar eftir uppsetningu.\n" "Á meðan uppsetningu stendur, verður þú að nota Hægri Ctrl\n" "lykilinn til að víxla milli mismunandi lyklaborðs-útlits." #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:173 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:190 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:191 network/adsl_consts.pm:826 #, c-format msgid "United Arab Emirates" msgstr "Sameinuðu Arabísku Furstadæmin" #: lang.pm:192 #, c-format msgid "Afghanistan" msgstr "Afganistan" #: lang.pm:193 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua og Barbuda" #: lang.pm:194 #, c-format msgid "Anguilla" msgstr "Anguilla" #: lang.pm:195 #, c-format msgid "Albania" msgstr "Albanía" #: lang.pm:196 #, c-format msgid "Armenia" msgstr "Armenía" #: lang.pm:197 #, c-format msgid "Netherlands Antilles" msgstr "Holland, Antilleyjar" #: lang.pm:198 #, c-format msgid "Angola" msgstr "Angóla" #: lang.pm:199 #, c-format msgid "Antarctica" msgstr "Suðurskautslandið" #: lang.pm:200 network/adsl_consts.pm:40 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Argentína" #: lang.pm:201 #, c-format msgid "American Samoa" msgstr "Ameríku Samóeyjar" #: lang.pm:203 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Ástralía" #: lang.pm:204 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:205 #, c-format msgid "Azerbaijan" msgstr "Asjerbæjan" #: lang.pm:206 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnía og Herzegónía" #: lang.pm:207 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:208 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:210 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:211 network/adsl_consts.pm:143 network/adsl_consts.pm:151 #, c-format msgid "Bulgaria" msgstr "Búlgaría" #: lang.pm:212 #, c-format msgid "Bahrain" msgstr "Bahrain" #: lang.pm:213 #, c-format msgid "Burundi" msgstr "Búrúndi" #: lang.pm:214 #, c-format msgid "Benin" msgstr "Benín" #: lang.pm:215 #, c-format msgid "Bermuda" msgstr "Bermúda" #: lang.pm:216 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: lang.pm:217 #, c-format msgid "Bolivia" msgstr "Bólivía" #: lang.pm:218 network/adsl_consts.pm:109 network/adsl_consts.pm:119 #: network/adsl_consts.pm:127 network/adsl_consts.pm:135 #, c-format msgid "Brazil" msgstr "Brasilía" #: lang.pm:219 #, c-format msgid "Bahamas" msgstr "Bahamaeyjar" #: lang.pm:220 #, c-format msgid "Bhutan" msgstr "Bútan" #: lang.pm:221 #, c-format msgid "Bouvet Island" msgstr "Bouvet eyja" #: lang.pm:222 #, c-format msgid "Botswana" msgstr "Botswana" #: lang.pm:223 #, c-format msgid "Belarus" msgstr "Hvítarússland" #: lang.pm:224 #, c-format msgid "Belize" msgstr "Belís" #: lang.pm:225 #, c-format msgid "Canada" msgstr "Kanada" #: lang.pm:226 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kókos (Keeling) eyjar" #: lang.pm:227 #, c-format msgid "Congo (Kinshasa)" msgstr "Kongó (Kinshasa)" #: lang.pm:228 #, c-format msgid "Central African Republic" msgstr "Miðafríkulýðveldið" #: lang.pm:229 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongó (brassaville)" #: lang.pm:231 #, c-format msgid "Cote d'Ivoire" msgstr "Cote d'Ivoire" #: lang.pm:232 #, c-format msgid "Cook Islands" msgstr "Cook eyjar" #: lang.pm:233 #, c-format msgid "Chile" msgstr "Chíle" #: lang.pm:234 #, c-format msgid "Cameroon" msgstr "Kamerún" #: lang.pm:235 network/adsl_consts.pm:159 network/adsl_consts.pm:167 #: network/adsl_consts.pm:175 network/adsl_consts.pm:183 #: network/adsl_consts.pm:191 network/adsl_consts.pm:199 #: network/adsl_consts.pm:207 network/adsl_consts.pm:215 #: network/adsl_consts.pm:223 network/adsl_consts.pm:231 #: network/adsl_consts.pm:239 network/adsl_consts.pm:247 #: network/adsl_consts.pm:255 network/adsl_consts.pm:263 #: network/adsl_consts.pm:271 network/adsl_consts.pm:279 #: network/adsl_consts.pm:287 network/adsl_consts.pm:295 #: network/adsl_consts.pm:303 network/adsl_consts.pm:311 #, c-format msgid "China" msgstr "Kína" #: lang.pm:236 #, c-format msgid "Colombia" msgstr "Kólumbía" #: lang.pm:238 #, c-format msgid "Serbia & Montenegro" msgstr "Serbía og Svartfjallaland" #: lang.pm:239 #, c-format msgid "Cuba" msgstr "Kúba" #: lang.pm:240 #, c-format msgid "Cape Verde" msgstr "Grænhöfðaeyjar" #: lang.pm:241 #, c-format msgid "Christmas Island" msgstr "Jólaeyjar" #: lang.pm:242 #, c-format msgid "Cyprus" msgstr "Kýpur" #: lang.pm:245 #, c-format msgid "Djibouti" msgstr "Djibútí" #: lang.pm:246 network/adsl_consts.pm:327 #, c-format msgid "Denmark" msgstr "Danmörk" #: lang.pm:247 #, c-format msgid "Dominica" msgstr "Dominiká" #: lang.pm:248 #, c-format msgid "Dominican Republic" msgstr "Dóminíska lýðveldið" #: lang.pm:249 network/adsl_consts.pm:30 #, c-format msgid "Algeria" msgstr "Algería" #: lang.pm:250 #, c-format msgid "Ecuador" msgstr "Ekvador" #: lang.pm:251 #, c-format msgid "Estonia" msgstr "Eistland" #: lang.pm:252 #, c-format msgid "Egypt" msgstr "Egyptaland" #: lang.pm:253 #, c-format msgid "Western Sahara" msgstr "Vestur Sahara" #: lang.pm:254 #, c-format msgid "Eritrea" msgstr "Erítrea" #: lang.pm:255 network/adsl_consts.pm:663 network/adsl_consts.pm:672 #: network/adsl_consts.pm:682 network/adsl_consts.pm:692 #: network/adsl_consts.pm:700 network/adsl_consts.pm:708 #: network/adsl_consts.pm:716 network/adsl_consts.pm:724 #: network/adsl_consts.pm:732 network/adsl_consts.pm:740 #: network/adsl_consts.pm:748 network/adsl_consts.pm:756 #: network/adsl_consts.pm:764 #, c-format msgid "Spain" msgstr "Spánn" #: lang.pm:256 #, c-format msgid "Ethiopia" msgstr "Eþíópía" #: lang.pm:257 network/adsl_consts.pm:335 #, c-format msgid "Finland" msgstr "Finnland" #: lang.pm:258 #, c-format msgid "Fiji" msgstr "Fíjí" #: lang.pm:259 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Falklandseyjar (Malvinas)" #: lang.pm:260 #, c-format msgid "Micronesia" msgstr "Míkrónesía" #: lang.pm:261 #, c-format msgid "Faroe Islands" msgstr "Færeyjar" #: lang.pm:263 #, c-format msgid "Gabon" msgstr "Gabon" #: lang.pm:264 network/adsl_consts.pm:836 network/adsl_consts.pm:846 #: network/netconnect.pm:52 #, c-format msgid "United Kingdom" msgstr "Stóra Bretland" #: lang.pm:265 #, c-format msgid "Grenada" msgstr "Grenada" #: lang.pm:266 #, c-format msgid "Georgia" msgstr "Georgía" #: lang.pm:267 #, c-format msgid "French Guiana" msgstr "Franska Gínea" #: lang.pm:268 #, c-format msgid "Ghana" msgstr "Gana" #: lang.pm:269 #, c-format msgid "Gibraltar" msgstr "Gíbraltar" #: lang.pm:270 #, c-format msgid "Greenland" msgstr "Grænland" #: lang.pm:271 #, c-format msgid "Gambia" msgstr "Gambía" #: lang.pm:272 #, c-format msgid "Guinea" msgstr "Gínea" #: lang.pm:273 #, c-format msgid "Guadeloupe" msgstr "Gvadalúp" #: lang.pm:274 #, c-format msgid "Equatorial Guinea" msgstr "Miðbaugs Gínea" #: lang.pm:276 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Suður Georgía og suður samlokueyjar" #: lang.pm:277 #, c-format msgid "Guatemala" msgstr "Gvatemala" #: lang.pm:278 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:279 #, c-format msgid "Guinea-Bissau" msgstr "Gínea-Bissáu" #: lang.pm:280 #, c-format msgid "Guyana" msgstr "Gvíana" #: lang.pm:281 #, c-format msgid "Hong Kong SAR (China)" msgstr "Hong Kong SAR (Kína)" #: lang.pm:282 #, c-format msgid "Heard and McDonald Islands" msgstr "Heard og McDonald eyjar" #: lang.pm:283 #, c-format msgid "Honduras" msgstr "Hondúras" #: lang.pm:284 #, c-format msgid "Croatia" msgstr "Króvatía" #: lang.pm:285 #, c-format msgid "Haiti" msgstr "Haíti" #: lang.pm:287 #, c-format msgid "Indonesia" msgstr "Indónesía" #: lang.pm:288 network/adsl_consts.pm:471 standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Írland" #: lang.pm:289 network/adsl_consts.pm:479 #, c-format msgid "Israel" msgstr "Ísrael" #: lang.pm:290 #, c-format msgid "India" msgstr "Indland" #: lang.pm:291 #, c-format msgid "British Indian Ocean Territory" msgstr "Bresku indíueyjar" #: lang.pm:292 #, c-format msgid "Iraq" msgstr "Írak" #: lang.pm:293 #, c-format msgid "Iran" msgstr "Íran" #: lang.pm:294 #, c-format msgid "Iceland" msgstr "Ísland" #: lang.pm:296 #, c-format msgid "Jamaica" msgstr "Jamaíka" #: lang.pm:297 #, c-format msgid "Jordan" msgstr "Jórdanía" #: lang.pm:298 #, c-format msgid "Japan" msgstr "Japan" #: lang.pm:299 #, c-format msgid "Kenya" msgstr "Kenía" #: lang.pm:300 #, c-format msgid "Kyrgyzstan" msgstr "Kirgistan" #: lang.pm:301 #, c-format msgid "Cambodia" msgstr "Kambódía" #: lang.pm:302 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:303 #, c-format msgid "Comoros" msgstr "Kómoros" #: lang.pm:304 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts og Nevis" #: lang.pm:305 #, c-format msgid "Korea (North)" msgstr "Kórea (norður)" #: lang.pm:306 #, c-format msgid "Korea" msgstr "Kórea" #: lang.pm:307 #, c-format msgid "Kuwait" msgstr "Kúvæt" #: lang.pm:308 #, c-format msgid "Cayman Islands" msgstr "Keyman eyjar" #: lang.pm:309 #, c-format msgid "Kazakhstan" msgstr "Kasakstan" #: lang.pm:310 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:311 #, c-format msgid "Lebanon" msgstr "Líbanon" #: lang.pm:312 #, c-format msgid "Saint Lucia" msgstr "Sankti Lúsía" #: lang.pm:313 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:314 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: lang.pm:315 #, c-format msgid "Liberia" msgstr "Líbería" #: lang.pm:316 #, c-format msgid "Lesotho" msgstr "Lesótó" #: lang.pm:317 network/adsl_consts.pm:527 #, c-format msgid "Lithuania" msgstr "Litháen" #: lang.pm:318 #, c-format msgid "Luxembourg" msgstr "Lúxemborg" #: lang.pm:319 #, c-format msgid "Latvia" msgstr "Lettland" #: lang.pm:320 #, c-format msgid "Libya" msgstr "Líbía" #: lang.pm:321 network/adsl_consts.pm:535 #, c-format msgid "Morocco" msgstr "Marokkó" #: lang.pm:322 #, c-format msgid "Monaco" msgstr "Mónakó" #: lang.pm:323 #, c-format msgid "Moldova" msgstr "Moldóvía" #: lang.pm:324 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: lang.pm:325 #, c-format msgid "Marshall Islands" msgstr "Marshall eyjar" #: lang.pm:326 #, c-format msgid "Macedonia" msgstr "Makedónía" #: lang.pm:327 #, c-format msgid "Mali" msgstr "Malí" #: lang.pm:328 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:329 #, c-format msgid "Mongolia" msgstr "Mongólía" #: lang.pm:330 #, c-format msgid "Northern Mariana Islands" msgstr "Norður Maríanaeyjar" #: lang.pm:331 #, c-format msgid "Martinique" msgstr "Martiník" #: lang.pm:332 #, c-format msgid "Mauritania" msgstr "Máritanía" #: lang.pm:333 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:334 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:335 #, c-format msgid "Mauritius" msgstr "Máritus" #: lang.pm:336 #, c-format msgid "Maldives" msgstr "Maldíví" #: lang.pm:337 #, c-format msgid "Malawi" msgstr "Malaví" #: lang.pm:338 #, c-format msgid "Mexico" msgstr "Mexíkó" #: lang.pm:339 #, c-format msgid "Malaysia" msgstr "Malasía" #: lang.pm:340 #, c-format msgid "Mozambique" msgstr "Mósabmbík" #: lang.pm:341 #, c-format msgid "Namibia" msgstr "Namibía" #: lang.pm:342 #, c-format msgid "New Caledonia" msgstr "Nýja Kaledónía" #: lang.pm:343 #, c-format msgid "Niger" msgstr "Níger" #: lang.pm:344 #, c-format msgid "Norfolk Island" msgstr "Norfolk eyjar" #: lang.pm:345 #, c-format msgid "Nigeria" msgstr "Nígería" #: lang.pm:346 #, c-format msgid "Nicaragua" msgstr "Nígarakúa" #: lang.pm:349 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:350 #, c-format msgid "Nauru" msgstr "Nárú" #: lang.pm:351 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:352 #, c-format msgid "New Zealand" msgstr "Nýja Sjáland" #: lang.pm:353 #, c-format msgid "Oman" msgstr "Óman" #: lang.pm:354 #, c-format msgid "Panama" msgstr "Panama" #: lang.pm:355 #, c-format msgid "Peru" msgstr "Perú" #: lang.pm:356 #, c-format msgid "French Polynesia" msgstr "Franska Pólínesía" #: lang.pm:357 #, c-format msgid "Papua New Guinea" msgstr "Papúa Nýja-Gínea" #: lang.pm:358 #, c-format msgid "Philippines" msgstr "Filippseyjar" #: lang.pm:359 #, c-format msgid "Pakistan" msgstr "Pakistan" #: lang.pm:361 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre og Miquelon" #: lang.pm:362 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:363 #, c-format msgid "Puerto Rico" msgstr "Puerto Ríko" #: lang.pm:364 #, c-format msgid "Palestine" msgstr "Palestína" #: lang.pm:365 network/adsl_consts.pm:634 #, c-format msgid "Portugal" msgstr "Portúgal" #: lang.pm:366 #, c-format msgid "Paraguay" msgstr "Paragvæ" #: lang.pm:367 #, c-format msgid "Palau" msgstr "Palá" #: lang.pm:368 #, c-format msgid "Qatar" msgstr "Kvatar" #: lang.pm:369 #, c-format msgid "Reunion" msgstr "Reunion" #: lang.pm:370 #, c-format msgid "Romania" msgstr "Rúmenía" #: lang.pm:371 network/adsl_consts.pm:642 #, c-format msgid "Russia" msgstr "Rússland" #: lang.pm:372 #, c-format msgid "Rwanda" msgstr "Rúanda" #: lang.pm:373 #, c-format msgid "Saudi Arabia" msgstr "Sádiarabía" #: lang.pm:374 #, c-format msgid "Solomon Islands" msgstr "Salómon eyjar" #: lang.pm:375 #, c-format msgid "Seychelles" msgstr "Seychelles" #: lang.pm:376 #, c-format msgid "Sudan" msgstr "Súdan" #: lang.pm:378 #, c-format msgid "Singapore" msgstr "Singapúr" #: lang.pm:379 #, c-format msgid "Saint Helena" msgstr "Saint Helena" #: lang.pm:380 network/adsl_consts.pm:652 #, c-format msgid "Slovenia" msgstr "Slóvenía" #: lang.pm:381 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbarði og Jan Mayen" #: lang.pm:383 #, c-format msgid "Sierra Leone" msgstr "Síera Leóne" #: lang.pm:384 #, c-format msgid "San Marino" msgstr "San Marínó" #: lang.pm:385 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:386 #, c-format msgid "Somalia" msgstr "Sómalía" #: lang.pm:387 #, c-format msgid "Suriname" msgstr "Súrinam" #: lang.pm:388 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome og Prinsípe" #: lang.pm:389 #, c-format msgid "El Salvador" msgstr "El Salvador" #: lang.pm:390 #, c-format msgid "Syria" msgstr "Sýrland" #: lang.pm:391 #, c-format msgid "Swaziland" msgstr "Svasiland" #: lang.pm:392 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks og Kaikós eyjar" #: lang.pm:393 #, c-format msgid "Chad" msgstr "Chad" #: lang.pm:394 #, c-format msgid "French Southern Territories" msgstr "Frönsku suðureyjar" #: lang.pm:395 #, c-format msgid "Togo" msgstr "Tógó" #: lang.pm:396 network/adsl_consts.pm:806 #, c-format msgid "Thailand" msgstr "Taíland" #: lang.pm:397 #, c-format msgid "Tajikistan" msgstr "Tajikistan" #: lang.pm:398 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:399 #, c-format msgid "East Timor" msgstr "Austur Tímor" #: lang.pm:400 #, c-format msgid "Turkmenistan" msgstr "Túrkmenistan" #: lang.pm:401 network/adsl_consts.pm:816 #, c-format msgid "Tunisia" msgstr "Túnis" #: lang.pm:402 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:403 #, c-format msgid "Turkey" msgstr "Tyrkland" #: lang.pm:404 #, c-format msgid "Trinidad and Tobago" msgstr "Trínidad og Tóbagó" #: lang.pm:405 #, c-format msgid "Tuvalu" msgstr "Túvaú" #: lang.pm:407 #, c-format msgid "Tanzania" msgstr "Tansanía" #: lang.pm:408 #, c-format msgid "Ukraine" msgstr "Úkraína" #: lang.pm:409 #, c-format msgid "Uganda" msgstr "Úganda" #: lang.pm:410 #, c-format msgid "United States Minor Outlying Islands" msgstr "Bandaríkin, smærri eyjar" #: lang.pm:412 #, c-format msgid "Uruguay" msgstr "Úrúgvæ" #: lang.pm:413 #, c-format msgid "Uzbekistan" msgstr "Úsbekistan" #: lang.pm:414 #, c-format msgid "Vatican" msgstr "Vatikanið" #: lang.pm:415 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Saint Vincent og Grenadín" #: lang.pm:416 #, c-format msgid "Venezuela" msgstr "Venesúela" #: lang.pm:417 #, c-format msgid "Virgin Islands (British)" msgstr "Jómfrúreyjar (Breskt)" #: lang.pm:418 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Jómfrúreyjar (US)" #: lang.pm:419 #, c-format msgid "Vietnam" msgstr "Víetnam" #: lang.pm:420 #, c-format msgid "Vanuatu" msgstr "Vanuatú" #: lang.pm:421 #, c-format msgid "Wallis and Futuna" msgstr "Wallis og Futuna" #: lang.pm:422 #, c-format msgid "Samoa" msgstr "Samóa" #: lang.pm:423 #, c-format msgid "Yemen" msgstr "Jemen" #: lang.pm:424 #, c-format msgid "Mayotte" msgstr "Mayotte" #: lang.pm:425 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Suður Afríka" #: lang.pm:426 #, c-format msgid "Zambia" msgstr "Sambía" #: lang.pm:427 #, c-format msgid "Zimbabwe" msgstr "Simbave" #: lang.pm:1040 #, c-format msgid "You should install the following packages: %s" msgstr "Þú ættir að setja inn eftirfarandi pakka: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1043 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1094 #, c-format msgid "Welcome to %s" msgstr "Velkomin(n) að %s" #: loopback.pm:31 #, c-format msgid "Circular mounts %s\n" msgstr "Hringtenging %s\n" #: lvm.pm:111 #, c-format msgid "Remove the logical volumes first\n" msgstr "Fjarlægðu sýndardrifin fyrst\n" #: modules/interactive.pm:21 standalone/drakconnect:1032 #, c-format msgid "Parameters" msgstr "Viðföng" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "ENGINN" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Uppsetning eininga" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Þú getur stillt öll viðföng einingarinnar hér." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Fann %s tengi" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Er kannski eitt enn í vélinni?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Eru einhver %s tengi í tölvunni?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Skoðaðu vélbúnaðarupplýsingar" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "Set inn rekil fyrir USB stýringu" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "Set inn rekil fyrir firewire stýringu %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "Set inn rekil fyrir diskstýringu %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "Set inn rekil fyrir ethernetkortið %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Set inn rekil fyrir %s kortið %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(eining %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Þú getur núna gefið upp viðföng fyrir eininguna %s.\n" "Athugið að vistföng eru gefin upp með formerki 0x eins og '0x123'" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Þú getur núna gefið upp viðföng fyrir eininguna %s.\n" "Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n" "Til dæmis: ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Stillingar kjarnaeininga:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Hvaða %s rekil viltu prófa?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n" " þó hann virki vel í flestum tilfellum án þeirra. Viltu setja inn auka\n" " viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n" " hann þarf? Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n" "að skemma neitt." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Stilla sjálfvirkt" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Stilla handvirkt" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Innsetning á einingu %s mistókst.\n" "Viltu prófa aftur með ólík viðföng?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "tala" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d tölur aðskildar með kommu" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d strengir aðskildir með kommu" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "tölur aðskildar með kommu" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "strengir aðskildir með kommu" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - mús" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Venjuleg" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Almenn PS2 hjól-mús" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 #: network/modem.pm:137 network/netconnect.pm:645 network/netconnect.pm:650 #: network/netconnect.pm:662 network/netconnect.pm:667 #: network/netconnect.pm:683 network/netconnect.pm:685 #, c-format msgid "Automatic" msgstr "Sjálfvirk" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 hnappur" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Almenn 2 hnappa mús" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Almenn þriggja hnappa mús með skrunhermi" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Hjól" #: mouse.pm:55 #, c-format msgid "serial" msgstr "raðtengd" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Almenn þriggja hnappa mús" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan með skrunhermi" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series með skrunhermi" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech mús (raðtengd, gömul C7 tegund)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech mús (raðtengd, gömul C7 tegund) með skrunhermi" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse með skrunhermi" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmús" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 hnappar" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 hnappar" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 hnappar með skrunhermi" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Einhverjar PS/2 & USB mýs" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft Explorer" #: mouse.pm:89 mouse.pm:359 mouse.pm:368 mouse.pm:420 #, c-format msgid "Synaptics Touchpad" msgstr "Synaptics snertiborð" #: mouse.pm:93 standalone/drakconnect:360 standalone/drakvpn:1140 #, c-format msgid "none" msgstr "ekkert" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Engin mús" #: mouse.pm:546 #, c-format msgid "Please test the mouse" msgstr "Vinsamlega prófaðu músina" #: mouse.pm:548 #, c-format msgid "To activate the mouse," msgstr "Til að virkja músina," #: mouse.pm:549 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "Hreyfðu hjólið!" #: network/adsl.pm:19 #, c-format msgid "use PPPoE" msgstr "nota PPPoE" #: network/adsl.pm:20 #, c-format msgid "use PPTP" msgstr "nota PPTP" #: network/adsl.pm:21 #, c-format msgid "use DHCP" msgstr "nota DHCP" #: network/adsl.pm:22 #, c-format msgid "Alcatel Speedtouch USB" msgstr "Alcatel Speedtouch USB" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr " - skynjað" #: network/adsl.pm:23 #, c-format msgid "Sagem (using PPPoA) USB" msgstr "Sagem (notar PPPoA) USB" #: network/adsl.pm:24 #, c-format msgid "Sagem (using DHCP) USB" msgstr "Sagem (notar DHCP) USB" #: network/adsl.pm:35 network/netconnect.pm:839 #, c-format msgid "Connect to the Internet" msgstr "Tengast Internetinu" #: network/adsl.pm:36 network/netconnect.pm:840 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" "Algengast er að tengjast við ADSL með PPPoE\n" "sumir nota pptp (Ísland), nokkrir nota DHCP.\n" "Ef þú veist ekki, veldu þá 'nota PPTP' (Ísland)" #: network/adsl.pm:41 network/netconnect.pm:844 #, c-format msgid "ADSL connection type:" msgstr "ADSL tengitegund:" #: network/drakfirewall.pm:12 share/compssUsers.pl:84 #, c-format msgid "Web Server" msgstr "Vefmiðlari" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Nafnaþjónn léns (DNS)" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "SSH miðlari" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "Ftp miðlari" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Póstþjónn" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP og IMAP þjónn" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Telnet miðlari" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "Windows diskmiðlun (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "CUPS þjónn" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "Endurvarp-svörun (ping)" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:131 #, c-format msgid "No network card" msgstr "Ekkert netkort fannst" #: network/drakfirewall.pm:152 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "drakfirewall stillingar\n" "\n" "Þessi eining stillir prívat eldvegg fyrir þessa Mandrakelinux vél\n" "Fyrir öruggan og aflmikinn eldvegg líttu á hina sértæku\n" "Mandrake eldveggs útgáfu." #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewall uppsetning\n" "\n" "Vertu viss um að hafa sett upp Staðarnet/Internet aðgangur með drakconnect " "áður en lengra er haldið." #: network/drakfirewall.pm:175 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Að hvaða þjónustum viltu leyfa Internetaðgang?" #: network/drakfirewall.pm:176 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Þú getur gefið upp ýmsar gáttir. \n" "gild dæmi eru 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Nánari upplýsingar eru t.d. í /etc/services ." #: network/drakfirewall.pm:182 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Ógild gátt gefin: %s.\n" "Rétt form er \"gátt/tcp\" eða \"gátt/udp\". \n" "þar sem gátt er á bilinu 1 til 65535\n" "\n" "Þú getur einnig gefið upp bil (t.d. 24300:24350/udp)" #: network/drakfirewall.pm:192 #, c-format msgid "Everything (no firewall)" msgstr "Allt (enginn eldveggur)" #: network/drakfirewall.pm:194 #, c-format msgid "Other ports" msgstr "aðrar gáttir" #: network/isdn.pm:125 network/netconnect.pm:490 network/netconnect.pm:602 #: network/netconnect.pm:605 #, c-format msgid "Unlisted - edit manually" msgstr "Óskráð - breyta handvirkt" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "I do not know" msgstr "Ég veit ekki" #: network/isdn.pm:169 network/netconnect.pm:422 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:170 network/netconnect.pm:422 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/netconnect.pm:650 network/netconnect.pm:667 #: network/netconnect.pm:683 #, c-format msgid "Manual" msgstr "Handvirkt" #: network/netconnect.pm:90 network/netconnect.pm:519 #: network/netconnect.pm:523 #, c-format msgid "Manual choice" msgstr "Handvirkt val" #: network/netconnect.pm:90 #, c-format msgid "Internal ISDN card" msgstr "Innvært ISDN mótald" #: network/netconnect.pm:100 #, c-format msgid "Ad-hoc" msgstr "Beintengt" #: network/netconnect.pm:101 #, c-format msgid "Managed" msgstr "Managed" #: network/netconnect.pm:102 #, c-format msgid "Master" msgstr "Stjórnandi" #: network/netconnect.pm:103 #, c-format msgid "Repeater" msgstr "Endurvaki" #: network/netconnect.pm:104 #, c-format msgid "Secondary" msgstr "Aukalegur" #: network/netconnect.pm:105 #, c-format msgid "Auto" msgstr "Sjálfvirkt" #: network/netconnect.pm:108 printer/printerdrake.pm:1354 #: standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Handvirk uppsetning" #: network/netconnect.pm:109 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "Sjálfvirkt IP (BOOT/DHCP)" #: network/netconnect.pm:111 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "Sjálfvirk IP (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:114 #, c-format msgid "Protocol for the rest of the world" msgstr "Samskiptaregla til tengingar við umheiminn" #: network/netconnect.pm:116 standalone/drakconnect:541 #, c-format msgid "European protocol (EDSS1)" msgstr "Evrópskan samskiptastaðal (EDSSI)" #: network/netconnect.pm:117 standalone/drakconnect:542 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Samskiptaregla til tengingar við umheiminn\n" "Ekki D-rás (leigðar línur)" #: network/netconnect.pm:153 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch USB mótald" #: network/netconnect.pm:154 #, c-format msgid "Sagem USB modem" msgstr "Sagem USB mótald" #: network/netconnect.pm:155 #, c-format msgid "Bewan modem" msgstr "Bewan mótald" #: network/netconnect.pm:156 #, c-format msgid "ECI Hi-Focus modem" msgstr "ECI Hi-Focus mótald" #: network/netconnect.pm:160 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Dynamic Host Configuration Protocol (DHCP)" #: network/netconnect.pm:161 #, c-format msgid "Manual TCP/IP configuration" msgstr "Handvirk TCP/IP uppsetning" #: network/netconnect.pm:162 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "Point to Point Tunneling Protocol (PPTP)" #: network/netconnect.pm:163 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "PPP yfir Ethernet (PPPoE)" #: network/netconnect.pm:164 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "PPP yfir ATM (PPPoA)" #: network/netconnect.pm:165 #, c-format msgid "DSL over CAPI" msgstr "DSL yfir CAPI" #: network/netconnect.pm:169 #, c-format msgid "Bridged Ethernet LLC" msgstr "Brúað Ethernet LLC" #: network/netconnect.pm:170 #, c-format msgid "Bridged Ethernet VC" msgstr "Brúað Ethernet VC" #: network/netconnect.pm:171 #, c-format msgid "Routed IP LLC" msgstr "Rútuð IP LLC" #: network/netconnect.pm:172 #, c-format msgid "Routed IP VC" msgstr "Rútuð IP VC" #: network/netconnect.pm:173 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:174 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:178 standalone/drakconnect:476 #, c-format msgid "Script-based" msgstr "Með skriftu" #: network/netconnect.pm:179 standalone/drakconnect:476 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:180 standalone/drakconnect:476 #, c-format msgid "Terminal-based" msgstr "Með skjáhermi" #: network/netconnect.pm:181 standalone/drakconnect:476 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:182 standalone/drakconnect:476 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:238 standalone/drakconnect:59 #, c-format msgid "Network & Internet Configuration" msgstr "Staðarnets og Internet stillingar" #: network/netconnect.pm:244 #, c-format msgid "(detected on port %s)" msgstr "(fundið á porti %s)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:246 #, c-format msgid "(detected %s)" msgstr "(skynjað %s)" #: network/netconnect.pm:246 #, c-format msgid "(detected)" msgstr "(skynjað)" #: network/netconnect.pm:248 #, c-format msgid "Modem connection" msgstr "Mótaldstenging" #: network/netconnect.pm:249 #, c-format msgid "ISDN connection" msgstr "ISDN tenging" #: network/netconnect.pm:250 #, c-format msgid "ADSL connection" msgstr "ADSL tenging" #: network/netconnect.pm:251 #, c-format msgid "Cable connection" msgstr "Breiðbandstenging" #: network/netconnect.pm:252 #, c-format msgid "LAN connection" msgstr "Staðarnetstenging" #: network/netconnect.pm:253 network/netconnect.pm:267 #, c-format msgid "Wireless connection" msgstr "Þráðlaus tenging" #: network/netconnect.pm:263 #, c-format msgid "Choose the connection you want to configure" msgstr "Veldu tenginguna sem þú vilt stilla" #: network/netconnect.pm:277 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Við ætlum nú að fara að stilla tenginguna %s.\n" "\n" "\n" "Ýttu á \"%s\" til að halda áfram." #: network/netconnect.pm:285 network/netconnect.pm:879 #, c-format msgid "Connection Configuration" msgstr "Tengi-stillingar" #: network/netconnect.pm:286 network/netconnect.pm:880 #, c-format msgid "Please fill or check the field below" msgstr "Vinsamlega fylltu inn eða hakaðu við svæðin að neðan" #: network/netconnect.pm:293 standalone/drakconnect:532 #, c-format msgid "Card IRQ" msgstr "Kort IRQ" #: network/netconnect.pm:294 standalone/drakconnect:533 #, c-format msgid "Card mem (DMA)" msgstr "Kortminni (DMA)" #: network/netconnect.pm:295 standalone/drakconnect:534 #, c-format msgid "Card IO" msgstr "Kort IO" #: network/netconnect.pm:296 standalone/drakconnect:535 #, c-format msgid "Card IO_0" msgstr "Kort IO_0" #: network/netconnect.pm:297 #, c-format msgid "Card IO_1" msgstr "Kort IO_1" #: network/netconnect.pm:298 #, c-format msgid "Your personal phone number" msgstr "Þitt símanúmer" #: network/netconnect.pm:299 network/netconnect.pm:883 #, c-format msgid "Provider name (ex provider.net)" msgstr "Nafn þjónustuaðila (t.d. simnet.is)" #: network/netconnect.pm:300 standalone/drakconnect:471 #, c-format msgid "Provider phone number" msgstr "Símanúmer netþjónustu" #: network/netconnect.pm:301 #, c-format msgid "Provider DNS 1 (optional)" msgstr "Nafnamiðlari DNS 1 (ekki krafist)" #: network/netconnect.pm:302 #, c-format msgid "Provider DNS 2 (optional)" msgstr "Nafnamiðlari DNS 2 (ekki krafist)" #: network/netconnect.pm:303 standalone/drakconnect:422 #, c-format msgid "Dialing mode" msgstr "Hringihamur" #: network/netconnect.pm:304 standalone/drakconnect:427 #: standalone/drakconnect:495 #, c-format msgid "Connection speed" msgstr "Tengihraði" #: network/netconnect.pm:305 standalone/drakconnect:432 #, c-format msgid "Connection timeout (in sec)" msgstr "Tenging fellur á tíma eftir (í sek)" #: network/netconnect.pm:308 network/netconnect.pm:329 #: network/netconnect.pm:886 standalone/drakconnect:469 #, c-format msgid "Account Login (user name)" msgstr "Netþjónustu-notandanafn" #: network/netconnect.pm:309 network/netconnect.pm:330 #: network/netconnect.pm:887 standalone/drakconnect:470 #, c-format msgid "Account Password" msgstr "Netþjónustu-lykilorð" #: network/netconnect.pm:325 #, c-format msgid "Cable: account options" msgstr "Breiðbandstengi: auðkenni notanda" #: network/netconnect.pm:328 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "Nota BPALogin (þarf fyrir Telstra)" #: network/netconnect.pm:362 network/netconnect.pm:715 #: network/netconnect.pm:920 #, c-format msgid "Select the network interface to configure:" msgstr "Veldu netkort sem á að stilla:" #: network/netconnect.pm:364 network/netconnect.pm:412 #: network/netconnect.pm:716 network/netconnect.pm:922 #: network/netconnect.pm:1091 network/shorewall.pm:98 #: standalone/drakconnect:684 standalone/drakgw:224 standalone/drakvpn:221 #, c-format msgid "Net Device" msgstr "Nettæki" #: network/netconnect.pm:365 network/netconnect.pm:373 #, c-format msgid "External ISDN modem" msgstr "Útvært ISDN mótald" #: network/netconnect.pm:411 standalone/harddrake2:210 #, c-format msgid "Select a device!" msgstr "Veldu tæki !" #: network/netconnect.pm:420 network/netconnect.pm:430 #: network/netconnect.pm:440 network/netconnect.pm:473 #: network/netconnect.pm:487 #, c-format msgid "ISDN Configuration" msgstr "ISDN uppsetning" #: network/netconnect.pm:421 #, c-format msgid "What kind of card do you have?" msgstr "Hvernig kort ertu með?" #: network/netconnect.pm:431 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Ef þú ert með ISA kort þá ættu gildin á næsta skjá að vera rétt.\n" "\n" "Ef þú hefur PCMCIA kort, þá þarft þú að vita \"irq\" og \"io\" kortsins.\n" #: network/netconnect.pm:435 #, c-format msgid "Continue" msgstr "Áfram" #: network/netconnect.pm:435 #, c-format msgid "Abort" msgstr "Hætta við" #: network/netconnect.pm:441 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Hvert af eftirfarandi er þitt ISDN kort?" #: network/netconnect.pm:459 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" "CAPI rekill er til fyrir þetta mótald. Þessi CAPI rekill býður upp á fleiri " "möguleika en frjálsi rekillinn (svo sem að senda föx). Hvorn rekilinviltu " "nota?" #: network/netconnect.pm:461 standalone/drakconnect:116 standalone/drakups:247 #: standalone/harddrake2:131 #, c-format msgid "Driver" msgstr "Rekill" #: network/netconnect.pm:473 #, c-format msgid "Which protocol do you want to use?" msgstr "Hvaða samskiptareglu viltu nota?" #: network/netconnect.pm:475 standalone/drakconnect:116 #: standalone/drakconnect:309 standalone/drakconnect:540 #: standalone/drakvpn:1142 #, c-format msgid "Protocol" msgstr "Samskiptaregla" #: network/netconnect.pm:487 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Veldu netþjónustuaðila.\n" "Ef hann er ekki á lista, veldu 'Ekki á lista'." #: network/netconnect.pm:489 network/netconnect.pm:601 #: network/netconnect.pm:757 #, c-format msgid "Provider:" msgstr "Þjónustuaðili:" #: network/netconnect.pm:504 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Mótaldið þitt er ekki stutt af kerfinu.\n" "Líttu á http://www.linmodems.org" #: network/netconnect.pm:516 #, c-format msgid "Select the modem to configure:" msgstr "Veldu mótald sem á að stilla:" #: network/netconnect.pm:568 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Veldu við hvaða raðtengi mótaldið er tengt." #: network/netconnect.pm:599 #, c-format msgid "Select your provider:" msgstr "Veldu þjónustuaðila:" #: network/netconnect.pm:627 #, c-format msgid "Dialup: account options" msgstr "Upphringi: auðkenni" #: network/netconnect.pm:630 #, c-format msgid "Connection name" msgstr "Nafn tengingar" #: network/netconnect.pm:631 #, c-format msgid "Phone number" msgstr "Símanúmer" #: network/netconnect.pm:632 #, c-format msgid "Login ID" msgstr "Notendanafn" #: network/netconnect.pm:647 network/netconnect.pm:680 #, c-format msgid "Dialup: IP parameters" msgstr "Upphringi: IP Viðföng" #: network/netconnect.pm:650 #, c-format msgid "IP parameters" msgstr "IP viðföng" #: network/netconnect.pm:651 network/netconnect.pm:1018 #: printer/printerdrake.pm:454 standalone/drakconnect:116 #: standalone/drakconnect:325 standalone/drakconnect:879 #: standalone/drakups:282 #, c-format msgid "IP address" msgstr "IP vistfang" #: network/netconnect.pm:652 #, c-format msgid "Subnet mask" msgstr "Staðarnetsía" #: network/netconnect.pm:664 #, c-format msgid "Dialup: DNS parameters" msgstr "Upphringi: DNS viðföng" #: network/netconnect.pm:667 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:668 #, c-format msgid "Domain name" msgstr "Nafn léns" #: network/netconnect.pm:669 network/netconnect.pm:884 #: standalone/drakconnect:997 #, c-format msgid "First DNS Server (optional)" msgstr "Aðal nafnamiðlari (ekki krafist)" #: network/netconnect.pm:670 network/netconnect.pm:885 #: standalone/drakconnect:998 #, c-format msgid "Second DNS Server (optional)" msgstr "Vara nafnamiðlari (ekki krafist)" #: network/netconnect.pm:671 #, c-format msgid "Set hostname from IP" msgstr "Setja vélarnafn frá IP" #: network/netconnect.pm:683 standalone/drakconnect:336 #, c-format msgid "Gateway" msgstr "Gátt" #: network/netconnect.pm:684 #, c-format msgid "Gateway IP address" msgstr "IP vistfang gáttar" #: network/netconnect.pm:715 #, c-format msgid "ADSL configuration" msgstr "ADSL uppsetning" #: network/netconnect.pm:755 #, c-format msgid "Please choose your ADSL provider" msgstr "Veldu ADSL þjónustuaðila þinn" #: network/netconnect.pm:773 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Þú þarft Alcatel míkrókóða frumrekla.\n" "Þú getur sett hann inn núna af disklingi eða frá Windows disksneið,\n" "eða sleppt því og gert það seinna." #: network/netconnect.pm:777 network/netconnect.pm:782 #, c-format msgid "Use a floppy" msgstr "Nota diskling" #: network/netconnect.pm:777 network/netconnect.pm:786 #, c-format msgid "Use my Windows partition" msgstr "Nota Windows disksneið" #: network/netconnect.pm:777 network/netconnect.pm:789 #, c-format msgid "Do it later" msgstr "Gera það seinna" #: network/netconnect.pm:796 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Tókst ekki að afrita frumrekla, skrá %s fannst ekki" #: network/netconnect.pm:803 #, c-format msgid "Firmware copy succeeded" msgstr "Afritun frumrekla tókst" #: network/netconnect.pm:818 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "Þú þarft Alcatel míkrókóða uppfærslu.\n" "sæktu hana á:\n" "%s\n" "og afritaðu mgmt.o á /usr/share/speedtouch" #: network/netconnect.pm:889 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:890 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:893 #, c-format msgid "Encapsulation:" msgstr "Umlukinn:" #: network/netconnect.pm:910 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/netconnect.pm:922 #, c-format msgid "Manually load a driver" msgstr "" #: network/netconnect.pm:922 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "" #: network/netconnect.pm:940 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Modifying the fields below will override this configuration.\n" "Do you really want to reconfigure this device?" msgstr "" #: network/netconnect.pm:954 network/netconnect.pm:1436 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Til hamingju, staðarnets og Internets uppsetningu er lokið.\n" "\n" #: network/netconnect.pm:971 #, c-format msgid "Zeroconf hostname resolution" msgstr "Zeroconf nafnleit vélar" #: network/netconnect.pm:972 network/netconnect.pm:1005 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "Stilli nettæki %s (rekill %s)" #: network/netconnect.pm:973 #, c-format msgid "" "The following protocols can be used to configure an ethernet connection. " "Please choose the one you want to use" msgstr "" #: network/netconnect.pm:1006 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n" "á að vera IP tala rituð með punkt á milli.\n" "(dæmi 1.2.3.4)." #: network/netconnect.pm:1013 #, c-format msgid "Assign host name from DHCP address" msgstr "Skilgreina nafn vélar frá DHCP vistfangi" #: network/netconnect.pm:1014 #, c-format msgid "DHCP host name" msgstr "DHCP vélarheiti" #: network/netconnect.pm:1019 standalone/drakconnect:330 #: standalone/drakconnect:880 standalone/drakgw:320 #, c-format msgid "Netmask" msgstr "Netsía" #: network/netconnect.pm:1021 standalone/drakconnect:415 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:1022 standalone/drakconnect:416 #, c-format msgid "Network Hotplugging" msgstr "Netstillingar útskifanlegra tækja" #: network/netconnect.pm:1024 standalone/drakconnect:410 #, c-format msgid "Start at boot" msgstr "Ræsa við kerfisræsingu" #: network/netconnect.pm:1027 standalone/drakconnect:883 #, c-format msgid "DHCP client" msgstr "DHCP biðlari" #: network/netconnect.pm:1041 standalone/drakconnect:389 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "Tenging fellur á tíma eftir (í sek)" #: network/netconnect.pm:1042 standalone/drakconnect:392 #, fuzzy, c-format msgid "Get DNS servers from DHCP" msgstr "Vistfang DNS þjóns" #: network/netconnect.pm:1043 #, c-format msgid "Get YP servers from DHCP" msgstr "" #: network/netconnect.pm:1044 #, c-format msgid "Get NTPD servers from DHCP" msgstr "" #: network/netconnect.pm:1037 printer/printerdrake.pm:1605 #: standalone/drakconnect:649 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP vistfang á að vera á sniðinu 1.2.3.4" #: network/netconnect.pm:1057 standalone/drakconnect:686 #, fuzzy, c-format msgid "Netmask address should be in format 255.255.224.0" msgstr "Vistfang Gáttar á að vera á sniðinu 1.2.3.4" #: network/netconnect.pm:1041 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "" #: network/netconnect.pm:1046 standalone/drakTermServ:1742 #: standalone/drakTermServ:1743 standalone/drakTermServ:1744 #, c-format msgid "%s already in use\n" msgstr "" #: network/netconnect.pm:1067 #, c-format msgid "Choose an ndiswrapper driver" msgstr "Veldu ndiswrapper rekil" #: network/netconnect.pm:1068 network/netconnect.pm:1075 #, c-format msgid "Install a new driver" msgstr "Setja inn nýjan rekil" #: network/netconnect.pm:1068 #, c-format msgid "Use already installed driver (%s)" msgstr "Nota þegar uppsettan rekil (%s)" #: network/netconnect.pm:1072 printer/printerdrake.pm:3644 #, c-format msgid "Could not install the %s package!" msgstr "Gat ekki sett inn pakkann %s!" #: network/netconnect.pm:1076 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "" #: network/netconnect.pm:1126 network/netconnect.pm:1155 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Sláðu inn visföng fyrir þetta þráðlausa netkort:" #: network/netconnect.pm:1129 standalone/drakconnect:382 #, c-format msgid "Operating Mode" msgstr "Vinnsluhamur" #: network/netconnect.pm:1131 standalone/drakconnect:383 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:1132 standalone/drakconnect:384 #, c-format msgid "Network ID" msgstr "Netauðkenni" #: network/netconnect.pm:1133 standalone/drakconnect:385 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:1134 standalone/drakconnect:386 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1135 standalone/drakconnect:387 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1141 #, c-format msgid "Use Wi-Fi Protected Access (WPA)" msgstr "" #: network/netconnect.pm:1168 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1145 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1158 standalone/drakconnect:398 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:1159 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1166 standalone/drakconnect:399 #, c-format msgid "Fragmentation" msgstr "Slitnir-pakkar" #: network/netconnect.pm:1167 standalone/drakconnect:400 #, c-format msgid "Iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:1168 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1175 standalone/drakconnect:401 #, c-format msgid "Iwspy command extra arguments" msgstr "Auka viðföng fyrir Iwspy" #: network/netconnect.pm:1176 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" "Iwspy er notað til að setja lista af addressum á þráðlausri nettengingu\n" "og lesa síðan til baka gæði tengingar við hvern og einn.\n" "\n" "Þetta eru sömu upplýsingarnar og eru í /proc/net/wireless :\n" "Gæði tengingar, styrkur merkis og truflanastyrkur.\n" "\n" "Sjá nánari upplýsingar á iwpspy(8) man síðu." #: network/netconnect.pm:1184 standalone/drakconnect:402 #, c-format msgid "Iwpriv command extra arguments" msgstr "Auka viðföng fyrir Iwpriv" #: network/netconnect.pm:1185 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1259 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Sláðu inn heiti vélarinnar. Vélarheitið þarf að vera fullt \n" "heiti, t.d. odinn.grimsey.is Þú mátt líka slá inn IP \n" "vistfang gáttarinnar ef þú veist hvað það vistfang er.\n" "Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)." #: network/netconnect.pm:1263 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" "Síðast enn ekki síst getur þú einnig slegið inn IP-tölu DNS nafnamiðlara." #: network/netconnect.pm:1265 standalone/drakconnect:996 #, c-format msgid "Host name (optional)" msgstr "Vélarnafn (þarf ekki)" #: network/netconnect.pm:1265 #, c-format msgid "Host name" msgstr "Heiti vélar" #: network/netconnect.pm:1267 #, c-format msgid "DNS server 1" msgstr "Nafnamiðlari 1 (DNS)" #: network/netconnect.pm:1268 #, c-format msgid "DNS server 2" msgstr "Nafnamiðlari 2 (DNS)" #: network/netconnect.pm:1269 #, c-format msgid "DNS server 3" msgstr "Nafnamiðlari 3 (DNS)" #: network/netconnect.pm:1270 #, c-format msgid "Search domain" msgstr "Leita í léni" #: network/netconnect.pm:1271 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "Sjálfgefið verður leitar-lén sett frá fullu vélarnafni." #: network/netconnect.pm:1272 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gátt (þ.e. %s)" #: network/netconnect.pm:1274 #, c-format msgid "Gateway device" msgstr "Gátt (tækið)" #: network/netconnect.pm:1283 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Vistfang DNS-þjóns á að vera á sniðinu 1.2.3.4" #: network/netconnect.pm:1288 standalone/drakconnect:652 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Vistfang Gáttar á að vera á sniðinu 1.2.3.4" #: network/netconnect.pm:1299 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" "Ef þú óskar, sláðu inn ZeroConf vélarnafn.\n" "Þetta er nafnið sem vélin þín notar til að auglýsa framboðnar\n" "þjónustur sem er ekki stjórnað af netinu.\n" "þess er ekki þörf á flestum netum." #: network/netconnect.pm:1303 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf Heiti vélar" #: network/netconnect.pm:1306 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zerocont vélarheiti má ekki innihalda ." #: network/netconnect.pm:1316 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Þú hefur skilgreint nokkrar leiðir til að tengjast Internetinu.\n" "Veldi þá sem þú vilt nota.\n" "\n" #: network/netconnect.pm:1318 #, c-format msgid "Internet connection" msgstr "Internettenging" #: network/netconnect.pm:1326 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "Uppsetningu lokið, viltu virkja stillingar?" #: network/netconnect.pm:1336 #, fuzzy, c-format msgid "Do you want to allow users to start the connection?" msgstr "Viltu ræsa nettengingarnar þegar kerfi ræsir?" #: network/netconnect.pm:1345 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Viltu ræsa nettengingarnar þegar kerfi ræsir?" #: network/netconnect.pm:1354 #, c-format msgid "Automatically at boot" msgstr "Sjálfvirkt við kerfisræsingu" #: network/netconnect.pm:1356 #, c-format msgid "By using Net Applet in the system tray" msgstr "Með því að nota Netforritið í kerfisbakkanum" #: network/netconnect.pm:1358 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "Handvirkt (tækið verður samt frumstillt þegar kerfið ræsir)" #: network/netconnect.pm:1367 #, c-format msgid "How do you want to dial this connection?" msgstr "Hvernig viltu hringja í þessa nettengingu?" #: network/netconnect.pm:1380 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "Það þarf að endurræsa netið, viltu endurræsa það núna?" #: network/netconnect.pm:1387 network/netconnect.pm:1452 #, c-format msgid "Network Configuration" msgstr "Netstillingar" #: network/netconnect.pm:1388 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Vandamál kom upp við enduræsingu nets: \n" "\n" "%s" #: network/netconnect.pm:1396 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Viltu reyna að tengjast Internetinu núna?" #: network/netconnect.pm:1404 standalone/drakconnect:1028 #, c-format msgid "Testing your connection..." msgstr "Prófa tenginguna þína..." #: network/netconnect.pm:1420 #, c-format msgid "The system is now connected to the Internet." msgstr "Kerfið er nú tengt Internetinu." #: network/netconnect.pm:1421 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Af öryggisástæðum verður aftengt núna." #: network/netconnect.pm:1422 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Kerfið virðist ekki vera tengt við Internetið.\n" "reyndu að endurstilla tenginguna." #: network/netconnect.pm:1439 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Eftir að þessu er lokið mælum við með að þú endurræsir X umhverfið til að " "koma í veg fyrir nafna-tengd vandamál." #: network/netconnect.pm:1440 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "Vandamál við uppsetningu.\n" "Prófaðu tenginguna með net_monitor eða mcc. ef tengingin virkar ekki,þá " "gætir þú reynt að endurtaka uppsetninguna." #: network/netconnect.pm:1453 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Af því að þú ert að setja upp netuppsetningu, þá er netið þitt þegar " "stillt.\n" "Smelltu á 'Í lagi' til að halda þessari uppsetningu, eða 'Hætta við' til að " "endurstilla Internet og nettengingar.\n" #: network/netconnect.pm:1491 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Óvænt villa hefur komið upp:\n" "%s" #: network/network.pm:319 #, c-format msgid "Proxies configuration" msgstr "Seluppsetning" #: network/network.pm:320 #, c-format msgid "HTTP proxy" msgstr "HTTP sel" #: network/network.pm:321 #, c-format msgid "FTP proxy" msgstr "FTP Sel" #: network/network.pm:324 #, c-format msgid "Proxy should be http://..." msgstr "Sel ætti að vera http://..." #: network/network.pm:325 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Slóð ætti að byrja á 'ftp' eða 'http'" #: network/shorewall.pm:25 #, c-format msgid "Firewalling configuration detected!" msgstr "Fann eldveggsuppsetningu!" #: network/shorewall.pm:26 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Aðvörun! Eldveggsuppsetning hefur fundist. Þú þarft kannski að breyta henni " "handvirkt eftir uppsetninguna." #: network/shorewall.pm:91 standalone/drakgw:217 standalone/drakvpn:214 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Vinsamlega sláðu inn nafn nettækis tengd internetinu.\n" "\n" "Dæmi:\n" "\t\tppp+ fyrir mótalds eða DSL tengingar, \n" "\t\teth0, eða eth1 fyrir breiðbandstengi, \n" "\t\tippp+ fyrir isdn tengi.\n" #: network/tools.pm:181 #, c-format msgid "Insert floppy" msgstr "Settu diskling í drif" #: network/tools.pm:182 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Settu FAT forsniðinn diskling í drif %s með %s í rótarmöppu og ýttu á %s" #: network/tools.pm:187 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Diskettuvilla, get ekki tengt %s" #: partition_table.pm:397 #, c-format msgid "mount failed: " msgstr "tókst ekki að tengja: " #: partition_table.pm:502 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: partition_table.pm:520 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n" "Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á " "viðbótasneið." #: partition_table.pm:611 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Villa við lestur úr skránni %s: %s" #: partition_table.pm:613 #, c-format msgid "Bad backup file" msgstr "Skemmd afritsskrá" #: partition_table.pm:633 #, c-format msgid "Error writing to file %s" msgstr "Villa við að skrifa í skrána %s" #: partition_table/raw.pm:240 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Eitthvað slæmt er að gerast á disknum þínum.\n" "Féll á prófi þar sem athugað var samræmi á \n" "gögnum á disknum\n" "Það þýðir að allt sem þú skrifar á diskinn verður\n" "líklega rangt þegar það er lesið aftur." #: pkgs.pm:23 #, c-format msgid "must have" msgstr "verð að fá" #: pkgs.pm:24 #, c-format msgid "important" msgstr "áríðandi" #: pkgs.pm:25 #, c-format msgid "very nice" msgstr "mjög þægilegt" #: pkgs.pm:26 #, c-format msgid "nice" msgstr "þægilegt" #: pkgs.pm:27 #, c-format msgid "maybe" msgstr "kannski" #: pkgs.pm:474 #, fuzzy, c-format msgid "Downloading file %s..." msgstr "Sendi skrár..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(á %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(á þessari vél)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "Stillt á öðrum vélum" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "Á CUPS þjóni \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4650 #: printer/printerdrake.pm:4660 printer/printerdrake.pm:4805 #: printer/printerdrake.pm:4816 printer/printerdrake.pm:5011 #, c-format msgid " (Default)" msgstr " (Sjálfgefið)" #: printer/data.pm:56 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Print, Do not Queue" #: printer/data.pm:57 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:69 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:70 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:91 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:92 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:117 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: printer/data.pm:147 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Common Unix Printing System (fjarlægur þjónn)" #: printer/data.pm:148 #, c-format msgid "Remote CUPS" msgstr "Fjarlægur CUPS þjónn" #: printer/detect.pm:153 printer/detect.pm:236 printer/detect.pm:438 #: printer/detect.pm:475 #, c-format msgid "Unknown Model" msgstr "Óþekkt tegund" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Staðbundinn prentari" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "Fjartengdur prentari" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "Prentari fjartengdur á CUPS þjóni" #: printer/main.pm:30 printer/printerdrake.pm:1628 #, c-format msgid "Printer on remote lpd server" msgstr "Prentari fjartengdur á lpd þjóni" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Net prentari (TCP/Sökkull)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Prentari á SMB/Windows 95/98/NT miðlara" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "Prentari á NetWare miðlara" #: printer/main.pm:34 printer/printerdrake.pm:1632 #, c-format msgid "Enter a printer device URI" msgstr "Gefðu upp slóð að prentara (URI)" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "Senda prentverk á skipun" #. Translation of the "(recommended)" in printer driver entries #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "mælt með" #: printer/main.pm:324 printer/main.pm:629 printer/main.pm:1664 #: printer/main.pm:2699 printer/main.pm:2708 printer/printerdrake.pm:903 #: printer/printerdrake.pm:2094 printer/printerdrake.pm:5048 #, c-format msgid "Unknown model" msgstr "Óþekkt tegund" #: printer/main.pm:349 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "Uppsettur á þessari vél" #: printer/main.pm:355 printer/printerdrake.pm:1175 #, c-format msgid " on parallel port #%s" msgstr " á raðtengi - port #%s" #: printer/main.pm:358 printer/printerdrake.pm:1178 #, c-format msgid ", USB printer #%s" msgstr ", USB prentari #%s" #: printer/main.pm:360 #, c-format msgid ", USB printer" msgstr ", USB prentari" #: printer/main.pm:364 #, c-format msgid ", HP printer on a parallel port" msgstr ", HP prentari á raðtengi" #: printer/main.pm:366 #, c-format msgid ", HP printer on USB" msgstr ", HP prentari á USB" #: printer/main.pm:368 #, c-format msgid ", HP printer on HP JetDirect" msgstr "" #: printer/main.pm:370 #, c-format msgid ", HP printer" msgstr ", HP prentari" #: printer/main.pm:376 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", margþætt tæki á á raðtengi - port \\#%s" #: printer/main.pm:379 #, c-format msgid ", multi-function device on a parallel port" msgstr ", margþætt tæki á raðtengi" #: printer/main.pm:381 #, c-format msgid ", multi-function device on USB" msgstr "" #: printer/main.pm:383 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:385 #, c-format msgid ", multi-function device" msgstr "" #: printer/main.pm:389 #, c-format msgid ", printing to %s" msgstr ", prenta á %s" #: printer/main.pm:392 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " á LPD þjóni \"%s\", prentari \"%s\"" #: printer/main.pm:395 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP vél \"%s\", gátt %s" #: printer/main.pm:400 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " á SMB/Windows miðlara \"%s\", sameign \"%s\"" #: printer/main.pm:405 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " á Novell miðlara \"%s\", prentari \"%s\"" #: printer/main.pm:408 #, c-format msgid ", using command %s" msgstr ", nota skipun %s" #: printer/main.pm:423 #, c-format msgid "Parallel port #%s" msgstr "Raðtengi - port #%s" #: printer/main.pm:426 printer/printerdrake.pm:1196 #: printer/printerdrake.pm:1223 printer/printerdrake.pm:1241 #, c-format msgid "USB printer #%s" msgstr "USB prentari #%s" #: printer/main.pm:428 #, c-format msgid "USB printer" msgstr "USB prentari" #: printer/main.pm:432 #, c-format msgid "HP printer on a parallel port" msgstr "HP prentari á raðtengi" #: printer/main.pm:434 #, c-format msgid "HP printer on USB" msgstr "HP prentari á USB" #: printer/main.pm:436 #, c-format msgid "HP printer on HP JetDirect" msgstr "" #: printer/main.pm:438 #, c-format msgid "HP printer" msgstr "HP Prentari" #: printer/main.pm:444 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Margþætt tæki á á raðtengi - port \\#%s" #: printer/main.pm:447 #, c-format msgid "Multi-function device on a parallel port" msgstr "Margþætt tæki á raðtengi" #: printer/main.pm:449 #, c-format msgid "Multi-function device on USB" msgstr "" #: printer/main.pm:451 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: printer/main.pm:453 #, c-format msgid "Multi-function device" msgstr "" #: printer/main.pm:457 #, c-format msgid "Prints into %s" msgstr "Prenta á %s" #: printer/main.pm:460 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD þjónn \"%s\", prentari \"%s\"" #: printer/main.pm:463 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP vél \"%s\", gátt %s" #: printer/main.pm:468 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows miðlari \"%s\", sameign \"%s\"" #: printer/main.pm:473 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novell miðlari \"%s\", prentari \"%s\"" #: printer/main.pm:476 #, c-format msgid "Uses command %s" msgstr "Notar skipun %s" #: printer/main.pm:478 #, c-format msgid "URI: %s" msgstr "" #: printer/main.pm:626 printer/printerdrake.pm:849 #: printer/printerdrake.pm:2861 #, c-format msgid "Raw printer (No driver)" msgstr "Hrár prentari (enginn rekill)" #: printer/main.pm:1176 printer/printerdrake.pm:205 #: printer/printerdrake.pm:217 #, c-format msgid "Local network(s)" msgstr "Staðbundið(n) net" #: printer/main.pm:1178 printer/printerdrake.pm:221 #, c-format msgid "Interface \"%s\"" msgstr "Tengi \"%s\"" #: printer/main.pm:1180 #, c-format msgid "Network %s" msgstr "Net %s" #: printer/main.pm:1182 #, c-format msgid "Host %s" msgstr "Vél %s" #: printer/main.pm:1211 #, c-format msgid "%s (Port %s)" msgstr "%s (Gátt %s)" #: printer/printerdrake.pm:19 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:61 #, c-format msgid "CUPS printer configuration" msgstr "CUPS prentarastillingar" #: printer/printerdrake.pm:62 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" #: printer/printerdrake.pm:63 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: printer/printerdrake.pm:66 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: printer/printerdrake.pm:71 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: printer/printerdrake.pm:76 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Samnýting prentara á vél/neti: " #: printer/printerdrake.pm:78 #, c-format msgid "Custom configuration" msgstr "Sérsniðin uppsetning" #: printer/printerdrake.pm:83 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Engar fjarlægar vélar" #: printer/printerdrake.pm:94 #, c-format msgid "Additional CUPS servers: " msgstr "Aðrir CUPS þjónar: " #: printer/printerdrake.pm:101 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:109 #, c-format msgid "Japanese text printing mode" msgstr "Japanskur prenthamur" #: printer/printerdrake.pm:110 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:117 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Sjáfvirk leiðrétting á CUPS uppsetningu" #: printer/printerdrake.pm:119 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:132 printer/printerdrake.pm:500 #: printer/printerdrake.pm:4292 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:135 #, c-format msgid "On" msgstr "Á" #: printer/printerdrake.pm:137 printer/printerdrake.pm:492 #: printer/printerdrake.pm:519 #, c-format msgid "Off" msgstr "Af" #: printer/printerdrake.pm:138 printer/printerdrake.pm:501 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:155 printer/printerdrake.pm:230 #, c-format msgid "Sharing of local printers" msgstr "Deila staðbundnum prenturum" #: printer/printerdrake.pm:156 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: printer/printerdrake.pm:167 #, c-format msgid "Add host/network" msgstr "Bæta við vél/neti" #: printer/printerdrake.pm:173 #, c-format msgid "Edit selected host/network" msgstr "Breyta valinni vél/neti" #: printer/printerdrake.pm:182 #, c-format msgid "Remove selected host/network" msgstr "Fjarlægja valda vél/net" #: printer/printerdrake.pm:213 printer/printerdrake.pm:223 #: printer/printerdrake.pm:235 printer/printerdrake.pm:242 #: printer/printerdrake.pm:273 printer/printerdrake.pm:291 #, c-format msgid "IP address of host/network:" msgstr "" #: printer/printerdrake.pm:231 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:238 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:246 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: printer/printerdrake.pm:247 printer/printerdrake.pm:423 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: printer/printerdrake.pm:271 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:340 printer/printerdrake.pm:410 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Tengjast fjartengdum prenturum á CUPS þjónum" #: printer/printerdrake.pm:341 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: printer/printerdrake.pm:352 #, c-format msgid "Add server" msgstr "Bæta við miðlara" #: printer/printerdrake.pm:358 #, c-format msgid "Edit selected server" msgstr "Breyta völdum prentara" #: printer/printerdrake.pm:367 #, c-format msgid "Remove selected server" msgstr "Fjarrlægja valinn prentara" #: printer/printerdrake.pm:411 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:412 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:416 #, c-format msgid "Server IP missing!" msgstr "IP-vistfang miðlara vantar!" #: printer/printerdrake.pm:422 #, c-format msgid "The entered IP is not correct.\n" msgstr "Uppgefið IP-vistfang er ekki rétt.\n" #: printer/printerdrake.pm:434 printer/printerdrake.pm:1852 #, c-format msgid "The port number should be an integer!" msgstr "" #: printer/printerdrake.pm:445 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: printer/printerdrake.pm:456 printer/printerdrake.pm:1873 #: standalone/drakups:247 standalone/harddrake2:50 #, c-format msgid "Port" msgstr "Port" #: printer/printerdrake.pm:489 printer/printerdrake.pm:505 #: printer/printerdrake.pm:520 printer/printerdrake.pm:524 #: printer/printerdrake.pm:530 #, c-format msgid "On, Name or IP of remote server:" msgstr "Á, Nafn eða IP-tala á fjartengdum þjóni:" #: printer/printerdrake.pm:508 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 #, c-format msgid "CUPS server name or IP address missing." msgstr "CUPS vélarnafn eða IP-tölu vantar." #: printer/printerdrake.pm:560 printer/printerdrake.pm:580 #: printer/printerdrake.pm:673 printer/printerdrake.pm:739 #: printer/printerdrake.pm:766 printer/printerdrake.pm:825 #: printer/printerdrake.pm:867 printer/printerdrake.pm:877 #: printer/printerdrake.pm:1926 printer/printerdrake.pm:2137 #: printer/printerdrake.pm:2169 printer/printerdrake.pm:2217 #: printer/printerdrake.pm:2269 printer/printerdrake.pm:2286 #: printer/printerdrake.pm:2330 printer/printerdrake.pm:2370 #: printer/printerdrake.pm:2420 printer/printerdrake.pm:2454 #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2714 #: printer/printerdrake.pm:2719 printer/printerdrake.pm:2856 #: printer/printerdrake.pm:2966 printer/printerdrake.pm:3560 #: printer/printerdrake.pm:3625 printer/printerdrake.pm:3674 #: printer/printerdrake.pm:3677 printer/printerdrake.pm:3808 #: printer/printerdrake.pm:3908 printer/printerdrake.pm:3980 #: printer/printerdrake.pm:4001 printer/printerdrake.pm:4010 #: printer/printerdrake.pm:4104 printer/printerdrake.pm:4196 #: printer/printerdrake.pm:4202 printer/printerdrake.pm:4222 #: printer/printerdrake.pm:4328 printer/printerdrake.pm:4435 #: printer/printerdrake.pm:4454 printer/printerdrake.pm:4463 #: printer/printerdrake.pm:4477 printer/printerdrake.pm:4673 #: printer/printerdrake.pm:5109 printer/printerdrake.pm:5186 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:561 printer/printerdrake.pm:3909 #: printer/printerdrake.pm:4436 #, c-format msgid "Reading printer data..." msgstr "Les prentara-upplýsingar..." #: printer/printerdrake.pm:581 #, c-format msgid "Restarting CUPS..." msgstr "" #: printer/printerdrake.pm:608 printer/printerdrake.pm:628 #, c-format msgid "Select Printer Connection" msgstr "Veldu prenttengingu" #: printer/printerdrake.pm:609 #, c-format msgid "How is the printer connected?" msgstr "Hvernig er þessi prentari tengdur?" #: printer/printerdrake.pm:611 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" #: printer/printerdrake.pm:614 printer/printerdrake.pm:4675 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:621 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" #: printer/printerdrake.pm:623 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:629 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:631 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:635 #, c-format msgid "The timeout must be a positive integer number!" msgstr "Tími verður að vera heiltala stærri en núll!" #: printer/printerdrake.pm:673 #, c-format msgid "Checking your system..." msgstr "Athuga tölvuna þína..." #: printer/printerdrake.pm:690 #, c-format msgid "and one unknown printer" msgstr "og einn óþekktur prentari" #: printer/printerdrake.pm:692 #, c-format msgid "and %d unknown printers" msgstr "og %d óþekktir prentarar" #: printer/printerdrake.pm:696 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Eftirfarandi prentarar\n" "\n" "%s%s\n" "eru tengdir beint við tölvuna þína" #: printer/printerdrake.pm:698 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Eftirfarandi prentarar\n" "\n" "%s%s\n" "eru tengdir beint við tölvuna þína" #: printer/printerdrake.pm:699 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Eftirfarandi prentari\n" "\n" "%s%s\n" "er tengdur beint við tölvuna þína" #: printer/printerdrake.pm:703 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: printer/printerdrake.pm:704 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: printer/printerdrake.pm:707 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: printer/printerdrake.pm:710 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" " (vertu viss um að allir þínir prentarar séu tengdir og kveikt á þeim).\n" #: printer/printerdrake.pm:723 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: printer/printerdrake.pm:724 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Viltu virkja prentun á prenturum á staðarnetinu?\n" #: printer/printerdrake.pm:726 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Viltu virkja prentun á ofangreindum prenturum?\n" #: printer/printerdrake.pm:727 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: printer/printerdrake.pm:728 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: printer/printerdrake.pm:767 #, c-format msgid "Searching for new printers..." msgstr "Leita að nýjum prenturum..." #: printer/printerdrake.pm:826 #, c-format msgid "Found printer on %s..." msgstr "Fann prentara á %s..." #: printer/printerdrake.pm:851 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:852 #, c-format msgid " on " msgstr " á " #: printer/printerdrake.pm:853 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:858 printer/printerdrake.pm:2868 #, c-format msgid "Printer model selection" msgstr "Veldu prentarategund" #: printer/printerdrake.pm:859 printer/printerdrake.pm:2869 #, c-format msgid "Which printer model do you have?" msgstr "Hvaða prentarategund ertu með?" #: printer/printerdrake.pm:860 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake gat ekki ákveðið hvaða tegund prentarinn þinn %s er. Vinsamlega " "veldu rétta tegund af listanum." #: printer/printerdrake.pm:863 printer/printerdrake.pm:2874 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: printer/printerdrake.pm:868 #, c-format msgid "Configuring printer on %s..." msgstr "Stilla prentara á %s..." #: printer/printerdrake.pm:878 printer/printerdrake.pm:4455 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Stilla prentara \"%s\"..." #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1048 #: printer/printerdrake.pm:1107 printer/printerdrake.pm:2103 #: printer/printerdrake.pm:2118 printer/printerdrake.pm:2188 #: printer/printerdrake.pm:4692 printer/printerdrake.pm:4861 #, c-format msgid "Add a new printer" msgstr "Bæta við prentara" #: printer/printerdrake.pm:1037 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: printer/printerdrake.pm:1050 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1059 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1067 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1076 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: printer/printerdrake.pm:1085 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Finna sjálfkrafa staðværa prentara" #: printer/printerdrake.pm:1088 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: printer/printerdrake.pm:1091 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: printer/printerdrake.pm:1108 #, fuzzy, c-format msgid "No auto-detection" msgstr "Finna sjálfkrafa" #: printer/printerdrake.pm:1173 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1143 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1435 printer/printerdrake.pm:1525 #: printer/printerdrake.pm:1663 printer/printerdrake.pm:1738 #: printer/printerdrake.pm:1890 printer/printerdrake.pm:1976 #: printer/printerdrake.pm:1985 printer/printerdrake.pm:1994 #: printer/printerdrake.pm:2005 printer/printerdrake.pm:2143 #: printer/printerdrake.pm:2229 printer/printerdrake.pm:2275 #: printer/printerdrake.pm:2342 printer/printerdrake.pm:2377 #, c-format msgid "Could not install the %s packages!" msgstr "Gat ekki sett inn pakkana %s!" #: printer/printerdrake.pm:1145 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1151 printer/printerdrake.pm:1296 #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, c-format msgid "Printer auto-detection" msgstr "Finna prentara sjálfkrafa" #: printer/printerdrake.pm:1151 #, c-format msgid "Detecting devices..." msgstr "Leita að tækjum..." #: printer/printerdrake.pm:1181 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", netprentari \"%s\", gátt %s" #: printer/printerdrake.pm:1184 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", prentari á \"%s\" SMB/Windows 95/98/NT \"%s\"" #: printer/printerdrake.pm:1188 #, c-format msgid "Detected %s" msgstr "Skyjnaði %s" #: printer/printerdrake.pm:1193 printer/printerdrake.pm:1220 #: printer/printerdrake.pm:1238 #, c-format msgid "Printer on parallel port #%s" msgstr "Prentari á raðtengi - port \\#%s" #: printer/printerdrake.pm:1199 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Netprentari \"%s\", gátt %s" #: printer/printerdrake.pm:1202 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Prentari á \"%s\" SMB/Windows 95/98/NT \"%s\"" #: printer/printerdrake.pm:1283 #, c-format msgid "Local Printer" msgstr "Staðbundinn prentari" #: printer/printerdrake.pm:1284 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: printer/printerdrake.pm:1288 #, c-format msgid "You must enter a device or file name!" msgstr "" #: printer/printerdrake.pm:1297 #, c-format msgid "No printer found!" msgstr "Enginn prentari fannst!" #: printer/printerdrake.pm:1305 #, c-format msgid "Local Printers" msgstr "Staðbundnir prentarar" #: printer/printerdrake.pm:1306 #, c-format msgid "Available printers" msgstr "Tiltækir prentarar" #: printer/printerdrake.pm:1310 printer/printerdrake.pm:1319 #, c-format msgid "The following printer was auto-detected. " msgstr "Eftirfarandi prentari fannst. " #: printer/printerdrake.pm:1312 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: printer/printerdrake.pm:1313 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1314 printer/printerdrake.pm:1323 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: printer/printerdrake.pm:1316 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: printer/printerdrake.pm:1317 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1321 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1322 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: printer/printerdrake.pm:1325 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1326 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Veldu prentara sem á að fá send prentverkin." #: printer/printerdrake.pm:1328 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: printer/printerdrake.pm:1329 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Veldu hvaða port er prentarinn er tengdur við." #: printer/printerdrake.pm:1331 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (hliðtengd port: /dev/lp0, /dev/lp1, ..., samsvarar LPT1:, LPT2:, ..., 1. " "USB prentari: /dev/usb/lp0, 2.USB prentari: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1335 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Þú verður að velja/gefa upp prentara/prenttæki!" #: printer/printerdrake.pm:1375 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1527 printer/printerdrake.pm:1665 #: printer/printerdrake.pm:1740 printer/printerdrake.pm:1892 #: printer/printerdrake.pm:1978 printer/printerdrake.pm:1987 #: printer/printerdrake.pm:1996 printer/printerdrake.pm:2007 #, c-format msgid "Aborting" msgstr "Hætti við" #: printer/printerdrake.pm:1410 #, c-format msgid "Remote lpd Printer Options" msgstr "Viðföng fyrir fjartengda lpd prentara" #: printer/printerdrake.pm:1411 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Til þess að nota fjartengda lpd prentröð þarftu að gefa\n" "upp vélarheiti prentþjónsins og prentröðina á þeim sem\n" "þú vilt senda prentverkin í." #: printer/printerdrake.pm:1412 #, c-format msgid "Remote host name" msgstr "Vélarnafn þjóns" #: printer/printerdrake.pm:1413 #, c-format msgid "Remote printer name" msgstr "Vélarnafn fjartengds prentara" #: printer/printerdrake.pm:1416 #, c-format msgid "Remote host name missing!" msgstr "Vélarnafn vantar á prentþjón!" #: printer/printerdrake.pm:1420 #, c-format msgid "Remote printer name missing!" msgstr "Nafn vantar á fjartengdan prentara!" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 standalone/drakTermServ:1480 #: standalone/drakTermServ:1488 standalone/drakTermServ:1500 #: standalone/drakbackup:512 standalone/drakbackup:618 #: standalone/drakbackup:653 standalone/drakbackup:773 #: standalone/harddrake2:256 #, c-format msgid "Information" msgstr "Upplýsingar" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #, c-format msgid "Detected model: %s %s" msgstr "Fann tegund: %s %s" #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, c-format msgid "Scanning network..." msgstr "Leita á neti..." #: printer/printerdrake.pm:1543 printer/printerdrake.pm:1564 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", prentari \"%s\" á miðlara \"%s\"" #: printer/printerdrake.pm:1546 printer/printerdrake.pm:1567 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Prentari \"%s\" á miðlara \"%s\"" #: printer/printerdrake.pm:1588 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) prentviðföng" #: printer/printerdrake.pm:1589 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Til þess að geta prentað á SMB prentara þarftu að gefa upp SMB vélarheiti " "þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið en oftast) og " "jafnvel IP vistfang prentþjónsins ásamt samnýtingarheiti prentarans, " "notandaheiti, lykilorði og Nethóps-upplýsingum fyrir prentarann." #: printer/printerdrake.pm:1590 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Ef prentarinn sem þú vilt nota fannst sjálfkrafa, veldu hann einfaldlega úr " "listanum og bættu við notandanafni, lykilorði og Nethóp ef þörf er." #: printer/printerdrake.pm:1592 #, c-format msgid "SMB server host" msgstr "Heiti SMB þjóns" #: printer/printerdrake.pm:1593 #, c-format msgid "SMB server IP" msgstr "Vistfang SMB þjóns" #: printer/printerdrake.pm:1594 #, c-format msgid "Share name" msgstr "Sameignarheiti" #: printer/printerdrake.pm:1597 #, c-format msgid "Workgroup" msgstr "Vinnuhópur" #: printer/printerdrake.pm:1599 #, c-format msgid "Auto-detected" msgstr "Fundinn sjálfkrafa" #: printer/printerdrake.pm:1609 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Annað hvort verður að gefa upp nafn miðlara eða IP-tölu!" #: printer/printerdrake.pm:1613 #, c-format msgid "Samba share name missing!" msgstr "Vantar samnýtingarheiti Samba!" #: printer/printerdrake.pm:1619 #, c-format msgid "SECURITY WARNING!" msgstr "ÖRYGGISAÐVÖRUN!" #: printer/printerdrake.pm:1620 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1630 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1633 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Tendgdu prentarann þinn við Linux miðlarann og láttu Windows vél(arnar) " "tengjast honum sem biðlarar.\n" "\n" "Viltu í alvöru halda áfram að setja upp þennan prentara eins og þú ert að " "gera núna?" #: printer/printerdrake.pm:1711 #, c-format msgid "NetWare Printer Options" msgstr "Viðföng NetWare prentara" #: printer/printerdrake.pm:1712 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Til þess að geta prentað á NetWare prentara þarftu að gefa upp NetWare\n" "vélarheiti þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið)\n" "ásamt heiti prentaraðar, notandaheiti og lykilorði fyrir\n" "prentarann." #: printer/printerdrake.pm:1713 #, c-format msgid "Printer Server" msgstr "Prentþjónn" #: printer/printerdrake.pm:1714 #, c-format msgid "Print Queue Name" msgstr "Heiti prentraðar" #: printer/printerdrake.pm:1719 #, c-format msgid "NCP server name missing!" msgstr "" #: printer/printerdrake.pm:1723 #, c-format msgid "NCP queue name missing!" msgstr "" #: printer/printerdrake.pm:1797 printer/printerdrake.pm:1817 #, c-format msgid ", host \"%s\", port %s" msgstr ", vél \"%s\", gátt %s" #: printer/printerdrake.pm:1800 printer/printerdrake.pm:1820 #, c-format msgid "Host \"%s\", port %s" msgstr "Vél \"%s\", gátt %s" #: printer/printerdrake.pm:1841 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Sökkul prentara-valkostir" #: printer/printerdrake.pm:1843 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: printer/printerdrake.pm:1844 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" #: printer/printerdrake.pm:1848 #, c-format msgid "Printer host name or IP missing!" msgstr "vélarnafn prentara-vélar eða IP vantar!" #: printer/printerdrake.pm:1871 #, c-format msgid "Printer host name or IP" msgstr "Nafn á prentara-vél eða IP" #: printer/printerdrake.pm:1927 #, c-format msgid "Refreshing Device URI list..." msgstr "Endurles tækja URI lista..." #: printer/printerdrake.pm:1930 printer/printerdrake.pm:1932 #, c-format msgid "Printer Device URI" msgstr "Slóð að prentara (URI)" #: printer/printerdrake.pm:1931 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:1957 #, c-format msgid "A valid URI must be entered!" msgstr "" #: printer/printerdrake.pm:2060 #, c-format msgid "Pipe into command" msgstr "Pípaa inn í skipun" #: printer/printerdrake.pm:2061 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2062 #, c-format msgid "Command line" msgstr "Skipanalína" #: printer/printerdrake.pm:2066 #, c-format msgid "A command line must be entered!" msgstr "Skipanalína verður að vera!" #: printer/printerdrake.pm:2104 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2106 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2107 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2108 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2110 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2112 #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2144 #: printer/printerdrake.pm:2170 #, c-format msgid "HPLIP" msgstr "" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2114 #: printer/printerdrake.pm:2270 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:2287 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2119 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2270 #, c-format msgid "Installing %s package..." msgstr "Set inn %s pakka..." #: printer/printerdrake.pm:2145 printer/printerdrake.pm:2277 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2160 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "Gat ekki fjarlægt gömlu HPOJ stillingarskrána %s fyrir %s! " #: printer/printerdrake.pm:2162 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2170 printer/printerdrake.pm:2287 #, c-format msgid "Checking device and configuring %s..." msgstr "" #: printer/printerdrake.pm:2189 #, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "Hvaða prentara vilt þú setja upp með HPLIP?" #: printer/printerdrake.pm:2218 printer/printerdrake.pm:2331 #, c-format msgid "Installing SANE packages..." msgstr "Set inn SANE pakka..." #: printer/printerdrake.pm:2231 printer/printerdrake.pm:2344 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2246 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2371 #, c-format msgid "Installing mtools packages..." msgstr "Set inn mtools pakka..." #: printer/printerdrake.pm:2379 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2395 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2404 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2421 #, c-format msgid "Configuring device..." msgstr "Set upp tæki..." #: printer/printerdrake.pm:2455 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2715 #: printer/printerdrake.pm:2857 #, c-format msgid "Reading printer database..." msgstr "Les prentara-gagnagrunn..." #: printer/printerdrake.pm:2674 #, c-format msgid "Enter Printer Name and Comments" msgstr "Gefðu upp nafn prentara og lýsingu" #: printer/printerdrake.pm:2678 printer/printerdrake.pm:3965 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: printer/printerdrake.pm:2684 printer/printerdrake.pm:3970 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: printer/printerdrake.pm:2691 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:2700 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: printer/printerdrake.pm:2701 #, c-format msgid "Name of printer" msgstr "Nafn prentara" #: printer/printerdrake.pm:2702 standalone/drakconnect:570 #: standalone/harddrake2:37 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "Lýsing" #: printer/printerdrake.pm:2703 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "Staðsetning" #: printer/printerdrake.pm:2720 #, c-format msgid "Preparing printer database..." msgstr "Undirbý prentara-gagnagrunn..." #: printer/printerdrake.pm:2836 #, c-format msgid "Your printer model" msgstr "Þín tegund prentara" #: printer/printerdrake.pm:2837 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:2842 printer/printerdrake.pm:2845 #, c-format msgid "The model is correct" msgstr "Tegundin er rétt" #: printer/printerdrake.pm:2843 printer/printerdrake.pm:2844 #: printer/printerdrake.pm:2847 #, c-format msgid "Select model manually" msgstr "Velja tegund handvirkt" #: printer/printerdrake.pm:2870 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:2889 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:2920 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:2921 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:2922 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:2923 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:2924 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:2925 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:2927 #, c-format msgid "Install PPD file from" msgstr "Setja inn PPD frá" #: printer/printerdrake.pm:2930 printer/printerdrake.pm:2938 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "Disklingadrif" #: printer/printerdrake.pm:2931 printer/printerdrake.pm:2940 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "Annar staður" #: printer/printerdrake.pm:2946 #, c-format msgid "Select PPD file" msgstr "Veljið PPD skrá" #: printer/printerdrake.pm:2950 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:2956 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:2967 #, c-format msgid "Installing PPD file..." msgstr "Set inn PPD file..." #: printer/printerdrake.pm:3084 #, c-format msgid "OKI winprinter configuration" msgstr "OKI winprinter stillingar" #: printer/printerdrake.pm:3085 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3110 printer/printerdrake.pm:3140 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark bleksprautu stillingar" #: printer/printerdrake.pm:3111 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: printer/printerdrake.pm:3141 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3151 #, c-format msgid "Lexmark X125 configuration" msgstr "Lexmark X125 stillingar" #: printer/printerdrake.pm:3152 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" #: printer/printerdrake.pm:3174 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Samsung ML/QL-85G stillingar" #: printer/printerdrake.pm:3175 printer/printerdrake.pm:3202 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3201 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "Canon LBP-460/660 stillingar" #: printer/printerdrake.pm:3220 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Vélbúnaðar-Uppfærsla fyrir HP LaserJet 1000" #: printer/printerdrake.pm:3369 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3494 #, c-format msgid "Printer default settings" msgstr "Sjálfgefin stilling prentara" #: printer/printerdrake.pm:3501 #, c-format msgid "Option %s must be an integer number!" msgstr "Valkostur %s verður að vera heiltala!" #: printer/printerdrake.pm:3505 #, c-format msgid "Option %s must be a number!" msgstr "Valkostur %s verður að vera tala!" #: printer/printerdrake.pm:3509 #, c-format msgid "Option %s out of range!" msgstr "" #: printer/printerdrake.pm:3560 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Viltu setja þennan prentara (\"%s\")\n" "sem sjálfgefinn prentara?" #: printer/printerdrake.pm:3575 #, c-format msgid "Test pages" msgstr "Prufusíður" #: printer/printerdrake.pm:3576 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: printer/printerdrake.pm:3580 #, c-format msgid "No test pages" msgstr "Engar prufusíður" #: printer/printerdrake.pm:3581 #, c-format msgid "Print" msgstr "Prenta" #: printer/printerdrake.pm:3606 #, c-format msgid "Standard test page" msgstr "Stöðluð prufusíða" #: printer/printerdrake.pm:3609 #, c-format msgid "Alternative test page (Letter)" msgstr "Önnur prufublaðsíða (Letter)" #: printer/printerdrake.pm:3612 #, c-format msgid "Alternative test page (A4)" msgstr "Önnur prufublaðsíða (A4)" #: printer/printerdrake.pm:3614 #, c-format msgid "Photo test page" msgstr "Myndprófunarsíðu(r)" #: printer/printerdrake.pm:3618 #, c-format msgid "Do not print any test page" msgstr "Prenta ekki út prufublaðsíðu(r)" #: printer/printerdrake.pm:3626 printer/printerdrake.pm:3809 #, c-format msgid "Printing test page(s)..." msgstr "Prenta út prufublaðsíðu(r)..." #: printer/printerdrake.pm:3646 #, c-format msgid "Skipping photo test page." msgstr "Sleppi myndprófunarsíðu." #: printer/printerdrake.pm:3663 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" #: printer/printerdrake.pm:3667 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" #: printer/printerdrake.pm:3677 #, c-format msgid "Did it work properly?" msgstr "" #: printer/printerdrake.pm:3700 printer/printerdrake.pm:5049 #, c-format msgid "Raw printer" msgstr "Hrár prentari" #: printer/printerdrake.pm:3738 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: printer/printerdrake.pm:3740 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3743 printer/printerdrake.pm:3760 #: printer/printerdrake.pm:3770 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: printer/printerdrake.pm:3746 printer/printerdrake.pm:3786 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: printer/printerdrake.pm:3750 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: printer/printerdrake.pm:3755 printer/printerdrake.pm:3765 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Til að prenta skrá frá skipanalínunni (skjáglugga) notaðu skipunina \"%s " "\".\n" #: printer/printerdrake.pm:3757 printer/printerdrake.pm:3767 #: printer/printerdrake.pm:3777 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3762 printer/printerdrake.pm:3772 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: printer/printerdrake.pm:3775 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3779 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:3783 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: printer/printerdrake.pm:3793 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Prenta/skanna/Mynd á \"%s\"" #: printer/printerdrake.pm:3794 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Prenta/skanna á \"%s\"" #: printer/printerdrake.pm:3796 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Prentun/Mynda-korts aðgangur á \"%s\"" #: printer/printerdrake.pm:3798 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Notkun/viðhald á prentara \"%s\"" #: printer/printerdrake.pm:3799 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Prenta á prentara \"%s\"" #: printer/printerdrake.pm:3805 #, c-format msgid "Print option list" msgstr "Valkostir á prentara" #: printer/printerdrake.pm:3827 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3830 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:3831 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share " "your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:3835 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:3836 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:3838 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3839 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:3842 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3843 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3844 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3845 #, c-format msgid " - Print head alignment\n" msgstr " - Samstilling prenthausa\n" #: printer/printerdrake.pm:3846 #, c-format msgid " - Color calibration\n" msgstr " - Litastilling\n" #: printer/printerdrake.pm:3861 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:3887 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:3929 printer/printerdrake.pm:3956 #: printer/printerdrake.pm:3991 #, c-format msgid "Transfer printer configuration" msgstr "Flytja prentarastillingar" #: printer/printerdrake.pm:3930 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: printer/printerdrake.pm:3933 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:3935 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: printer/printerdrake.pm:3937 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: printer/printerdrake.pm:3939 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: printer/printerdrake.pm:3940 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Einnig er ekki hægt að flytja prentara sem eru skilgreindir með PPD skrám " "frá framleiðanda eða prentara með eigin CUPS reklum." #: printer/printerdrake.pm:3941 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: printer/printerdrake.pm:3944 #, c-format msgid "Do not transfer printers" msgstr "Ekki flytja prentara" #: printer/printerdrake.pm:3945 printer/printerdrake.pm:3961 #, c-format msgid "Transfer" msgstr "Flutningur" #: printer/printerdrake.pm:3957 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: printer/printerdrake.pm:3978 #, c-format msgid "New printer name" msgstr "Nýtt prentaranafn" #: printer/printerdrake.pm:3981 #, c-format msgid "Transferring %s..." msgstr "Flyt %s..." #: printer/printerdrake.pm:3992 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4002 #, c-format msgid "Refreshing printer data..." msgstr "Endurles prentara upplýsingar..." #: printer/printerdrake.pm:4011 #, c-format msgid "Starting network..." msgstr "Ræsi net..." #: printer/printerdrake.pm:4054 printer/printerdrake.pm:4058 #: printer/printerdrake.pm:4060 #, c-format msgid "Configure the network now" msgstr "Stilla nettengingu núna" #: printer/printerdrake.pm:4055 #, c-format msgid "Network functionality not configured" msgstr "Netmöguleikar ekki skilreindir" #: printer/printerdrake.pm:4056 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: printer/printerdrake.pm:4059 #, c-format msgid "Go on without configuring the network" msgstr "Halda áfram án þess að stilla nettengingu" #: printer/printerdrake.pm:4094 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: printer/printerdrake.pm:4095 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: printer/printerdrake.pm:4105 #, c-format msgid "Restarting printing system..." msgstr "Endurræsi prentkerfi..." #: printer/printerdrake.pm:4135 #, c-format msgid "high" msgstr "Hátt" #: printer/printerdrake.pm:4135 #, c-format msgid "paranoid" msgstr "Taugaveiklað" #: printer/printerdrake.pm:4137 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: printer/printerdrake.pm:4138 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4173 #, c-format msgid "Starting the printing system at boot time" msgstr "Ræsa prentkerfi við kerfisræsingu" #: printer/printerdrake.pm:4174 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4196 #, c-format msgid "Checking installed software..." msgstr "Athuga uppsettann hugbúnað..." #: printer/printerdrake.pm:4202 #, c-format msgid "Removing %s..." msgstr "Fjarlægi %s..." #: printer/printerdrake.pm:4206 #, c-format msgid "Could not remove the %s printing system!" msgstr "Gat ekki fjarlægt %s prentkerfið!" #: printer/printerdrake.pm:4222 #, c-format msgid "Installing %s..." msgstr "Set inn %s..." #: printer/printerdrake.pm:4226 #, c-format msgid "Could not install the %s printing system!" msgstr "Gat ekki sett inn %s prentkerfið!" #: printer/printerdrake.pm:4293 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4295 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4309 #, c-format msgid "Name or IP of remote server:" msgstr "Nafn eða IP-tala á fjarlægum þjóni:" #: printer/printerdrake.pm:4329 #, c-format msgid "Setting Default Printer..." msgstr "Set sjálfgefinn prentara..." #: printer/printerdrake.pm:4348 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Staðbundið CUPS prentkerfi eða fjartengdur CUPS þjónn?" #: printer/printerdrake.pm:4349 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4351 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4352 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4353 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4355 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4356 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4357 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4359 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4363 printer/printerdrake.pm:4378 #: printer/printerdrake.pm:4382 printer/printerdrake.pm:4388 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4377 #, c-format msgid "Local CUPS printing system" msgstr "Staðbundið CUPS prentkerfi" #: printer/printerdrake.pm:4415 #, c-format msgid "Select Printer Spooler" msgstr "Veldu biðraðastjóra" #: printer/printerdrake.pm:4416 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Hvaða prentkerfi (biðraðastjóra) viltu nota?" #: printer/printerdrake.pm:4464 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Gat ekki stillt prentara \"%s\"!" #: printer/printerdrake.pm:4478 #, c-format msgid "Installing Foomatic..." msgstr "Set inn Foomatic..." #: printer/printerdrake.pm:4484 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:4674 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" #: printer/printerdrake.pm:4704 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: printer/printerdrake.pm:4705 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: printer/printerdrake.pm:4716 #, c-format msgid "CUPS configuration" msgstr "CUPS uppsetning" #: printer/printerdrake.pm:4728 #, c-format msgid "Change the printing system" msgstr "Breyta prentkerfinu" #: printer/printerdrake.pm:4737 #, c-format msgid "Normal Mode" msgstr "Venjulegur hamur" #: printer/printerdrake.pm:4738 #, c-format msgid "Expert Mode" msgstr "F. sérfræðinga" #: printer/printerdrake.pm:4992 printer/printerdrake.pm:5050 #: printer/printerdrake.pm:5128 printer/printerdrake.pm:5137 #, c-format msgid "Printer options" msgstr "Stillingar á prentara" #: printer/printerdrake.pm:5028 #, c-format msgid "Modify printer configuration" msgstr "Breyta prentarastillingum" #: printer/printerdrake.pm:5030 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Prentari %s%s\n" "Hverju viltu breyta á þessum prentara?" #: printer/printerdrake.pm:5035 #, c-format msgid "This printer is disabled" msgstr "Þessi printari er óvirkur" #: printer/printerdrake.pm:5037 #, c-format msgid "Do it!" msgstr "Áfram!" #: printer/printerdrake.pm:5042 printer/printerdrake.pm:5097 #, c-format msgid "Printer connection type" msgstr "Tegund prenttengingar" #: printer/printerdrake.pm:5043 printer/printerdrake.pm:5103 #, c-format msgid "Printer name, description, location" msgstr "Prentaranafn, lýsing, staðsetning" #: printer/printerdrake.pm:5045 printer/printerdrake.pm:5121 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: printer/printerdrake.pm:5046 printer/printerdrake.pm:5122 #, c-format msgid "Printer manufacturer, model" msgstr "" #: printer/printerdrake.pm:5052 printer/printerdrake.pm:5132 #, c-format msgid "Set this printer as the default" msgstr "Setja þennan prentara sjálfgefinn" #: printer/printerdrake.pm:5057 printer/printerdrake.pm:5138 #: printer/printerdrake.pm:5140 #, c-format msgid "Enable Printer" msgstr "Virkja prentara" #: printer/printerdrake.pm:5060 printer/printerdrake.pm:5143 #: printer/printerdrake.pm:5145 #, c-format msgid "Disable Printer" msgstr "Aftengja prentara" #: printer/printerdrake.pm:5061 printer/printerdrake.pm:5148 #, c-format msgid "Print test pages" msgstr "Prenta út prufublaðsíðu(r)" #: printer/printerdrake.pm:5062 printer/printerdrake.pm:5150 #, c-format msgid "Learn how to use this printer" msgstr "Læra hvernig á að nota þennann prentara" #: printer/printerdrake.pm:5063 printer/printerdrake.pm:5152 #, c-format msgid "Remove printer" msgstr "Fjarlægja prentara" #: printer/printerdrake.pm:5110 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Fjarlægi gamlan prentara \"%s\"..." #: printer/printerdrake.pm:5141 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "Prentari \"%s\" er nú virkur." #: printer/printerdrake.pm:5146 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "Prentari \"%s\" er nú óvirkur." #: printer/printerdrake.pm:5183 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Vitlu í alvöru fjarlægja prentarann \"%s\"?" #: printer/printerdrake.pm:5187 #, c-format msgid "Removing printer \"%s\"..." msgstr "Fjarlægi prentara \"%s\"..." #: printer/printerdrake.pm:5211 #, c-format msgid "Default printer" msgstr "Sjálfgefinn prentari" #: printer/printerdrake.pm:5212 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: raid.pm:42 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Get ekki bætt við sneið á _forsniðinn_ RAID %s" #: raid.pm:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Ekki nógu margar disksneiðar fyrir RAID %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "Gat ekki búið til skrána /usr/share/sane/firmware!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "Gat ekki búið til tengingu /usr/share/sane/%s!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "Gat ekki afritað vélbúnaðarskrá %s til /usr/share/sane/firmware!" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "Gat ekki sett heimildir á vélbúnaðarskrá %s!" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "Gat ekki sett inn pakka sem þarf til að miðla skannanum þínum." #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "Skanninn þinn verður ekki aðgengilegur nema fyrir kerfisstjóra." #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "Leyfa/Hafna gölluðum IPv4 villuskeytum." #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr " Leyfa/hafna útvörpun á 'icmp echo'." #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr " Leyfa/Hafna icmp endurvörpun." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Leyfa/Hafna sjálfvirka innskráningu." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Ef skilgreint sem \"ALL\", /etc/issue og /etc/issue.net mega vera til.\n" "\n" "Ef skilgreint sem \"NONE\", engar issue skrár eru leyfðar.\n" "\n" "Annars er /etc/issue leyft." #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Leyfa/Banna enduræsingu af notanda stjórnskjá." #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "Leyfa/banna neti-nnskráningu á kerfisstjóra." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Leyfa/banna beina instimplun kerfisstjóra." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Leyfa/Banna lista af notendum kerfisins í innskráningarglugga (kdm og gdm)." #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" "Leyfa/Banna útflutning skjás þegar\n" "flutt er frá kerfisstjóra til annara notanda.\n" "\n" "Sjá meiri upplýsingar í pam_xauth(8).'" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Leyfa/Banna X tengingar:\n" "\n" "- ALL (allar tengingar leyfðar),\n" "\n" "- LOCAL (aðeins staðbundnar tengingar leyfðar),\n" "\n" "- NONE (engar tengingar leyfðar)." #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Þessi breyta skilgreinir hvort biðlar hafi leyfir til að tengjast X-miðlara " "frá netinu\n" "yfir tcp-gátt 6000." #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Virkja/Aftengja crontab og at fyrir notendur.\n" "\n" "Setja leyfða notendur í /etc/cron.allow og /etc/at.allow (sjá man at(1)\n" "og crontab(1))." #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Virkja/Aftengja syslog færslur á skjá 12" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "Öryggisviðvaranir:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "Virkja/Aftengja libsafe ef libsafe finnst á kerfinu." #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "Setja 'umask' rótar." #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "" #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "ef hakað er við, þá er fylgst með breytingum á forritum sem keyra sem rót." #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "ef sett já, þá tilkynna skrár án eiganda." #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "Setja umask notanda." #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Leyfa root innstimplun yfir net" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "Leyfa X Window tengingar" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig fylgi msec reglum" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "Kerfisannáll er skráður á skjá 12" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "Enginn öldrun á lykilorði fyrir" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Lengd lykilorðssögu" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Rótar-umask" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Tímamörk skeljar" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "Umask notenda" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Athuga opin port" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "Tilkynna skrár án eiganda" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "ef sett, senda skýrslu með pósti til þessa vistfangs - annars til root" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Skrifa athuganir í kerfisannál" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Velkomin(n) í tölvuþrjótinn" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Lélegt" #: security/level.pm:13 #, c-format msgid "High" msgstr "Hátt" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Hærra" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Taugaveiklað" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Þetta þrep verður að nota með varúð. Það gerir einfalt að nota tölvuna\n" "þína, en hún verður mjög viðkvæm. Hún ætti ekki að vera tengd öðrum\n" "tölvum á netinu. Engra lykilorða er krafist." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Lykilorð eru nú virk, en ekki er mælt með notkun að tölvan sé nettengd." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Þetta er hið hefðbundna öryggi sem mælt er með fyrir tölvu sem verður notuð\n" "til að tengja við netið sem biðill." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Það eru nú þegar nokkrar takmarkanir og sjálfvirkar prófanir eru keyrðar á " "hverri nóttu." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Á þessu öryggisstigi er orðið mögulegt að nota tölvuna sem miðlara.\n" "Öryggið er nógu nógu mikið til að taka við fyrirspurnum frá\n" "mörgum biðlum. Athugið: ef vélin þín er biðlari á Internetinu\n" "þá ættir þú að velja lægra öryggisþrep." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Líkt fyrra þrepi, en kerfið er nú alveg lokað og öryggið er á hæsta stigi." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec grunnvalkostir" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Vinsamlega veldu öryggisþrep" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Öryggisþrep" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Nota libsafe fyrir þjóna" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd er notaður til að fylgjast með stöðu rafhlöðu og skrá í kerfisannál.\n" "Einnig er hægt að nota hann til að slökkva á tölvu þegar rafhlaða er að " "tæmast." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM veitir músarstuðning til forrita sem keyra í textaham Linux\n" "s.s. Midnight Commander. Það veitir líka möguleika á að klippa\n" "og líma og valseðlaþjónustu í textaham." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "HardDrake athugar vélbúnað og stillir ný og breytt jaðartæki." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "Apache er vefmiðlari, sem veitir aðgang að HTML skjölum og CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd er prentþjónn sem lpr þarfnast til að geta unnið sín verk.\n" "Þetta er í grunni þjónn sem deilir prentverkum á prentara." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, notað til að byggja öflugan skráarmiðlara\n" "með háan uppitíma." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) er nafnaþjónusta fyrir net (DNS) sem varpar netnafni yfir í IP-" "vistföng." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Tengir og aftengir allar NFS nettengingar, SMB (Lan Manager\n" "/Windows) og NCP (NetWare) tengingar." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Virkjar eða aftengir öll nettengi skilgreind til að ræsast\n" "þegar kerfi er ræst." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n" "Þessi þjónusta veitir NFS skráamiðlun, sem er stillt í\n" "/etc/exports skránni." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS er vinsæl aðferð til skráarmiðlunar yfir TCP/IP net.\n" "Þessi þjónusta bætir skráarlæsingum við NFS." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "Setja sjálfkrafa á numlock lykil í skjáhermi og við ræsingu." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Stuðningur fyrir OKI 4w og sambærilega Windows prentara." #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA þjónusta er venjulega til að styðja við hluti eins og netkort\n" "og mótöld á ferðavélum. Þessi þjónusta fer ekki af stað nema hún sé\n" "stillt svo það er í lagi að hafa þetta á vélum sem þarfnast þess ekki." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper sér um RPC tengingar sem eru notaðar af NIS og NFS\n" "portmap þjónustan verður að vera keyrandi fyrir vélar sem á eru\n" "þjónustur sem byggja á RPC samskiptum." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix er póstflutningskerfi, sem flytur tölvupóst frá einni vél til " "annarrar." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Geymir og sækir slembitölugrunn kerfis til að bæta gæði\n" "slembitalna." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat samskiptareglan leyfir notendum á neti að sækja\n" "upplýsingar um afköst annarra véla á netinu." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers leyfir notendum á neti að athuga hverjir hafa stimplað sig\n" "inn á viðkomandi vélar." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "rwho gefur fjarstöddum notendum lista af notendum sem eru\n" "stimplaðir inn á vélina (svipað finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Ræsa hljóðkerfi fyrir vélina þína" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog er kerfisþjónusta sem mörg forrit nota til að skrá skilaboð\n" "í ýmsa kerfisannála.. Það er góð hugmynd að hafa syslog alltaf keyrandi." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Hlaða inn reklum fyrir USB tæki." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "Ræsa X leturþjón (þetta verður að vera til að Xorg keyri)." #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Veldu þær þjónustur sem skal sjálfkrafa keyra við ræsingu" #: services.pm:127 #, c-format msgid "Printing" msgstr "Prentun" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Skráarmiðlun" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Fjarvinnsla" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Gagnagrunnsmiðlari" #: services.pm:209 #, c-format msgid "running" msgstr "keyrandi" #: services.pm:209 #, c-format msgid "stopped" msgstr "stöðvað" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Þjónustur og púkar" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Engar aukalegar upplýsingar\n" "um þetta tæki, því miður." #: services.pm:224 ugtk2.pm:1010 #, c-format msgid "Info" msgstr "Upplýsingar" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "" #: services.pm:227 #, c-format msgid "On boot" msgstr "Við ræsingu" #: services.pm:244 #, c-format msgid "Start" msgstr "Ræsa" #: services.pm:244 #, c-format msgid "Stop" msgstr "Stöðva" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandrakelinux!" msgstr "Velkomin(n) í Mandrakelinux!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandrakelinux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" #: share/advertising/01.pl:19 #, c-format msgid "" "Mandrakelinux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "Opinn frumkóði" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "Velkomin í heim opins hugbúnaðar!" #: share/advertising/02.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandrakesoft's " "team of developers and the worldwide community of Mandrakelinux " "contributors." msgstr "" #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the " "Mandrakelinux tools are licensed under the General Public License." msgstr "" #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandrakelinux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandrakelinux world." msgstr "" #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrakelinux.com or directly www.mandrakelinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" #: share/advertising/05.pl:13 #, c-format msgid "Download Version" msgstr "" #: share/advertising/05.pl:15 #, c-format msgid "" "You are now installing Mandrakelinux Download. This is the free " "version that Mandrakesoft wants to keep available to everyone." msgstr "" #: share/advertising/05.pl:17 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" #: share/advertising/05.pl:18 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" #: share/advertising/05.pl:19 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" #: share/advertising/05.pl:21 #, c-format msgid "" "You will not have access to the services included in the other " "Mandrakesoft products either." msgstr "" #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandrakelinux Discovery." msgstr "" #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack." msgstr "" #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandrakesoft's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack+." msgstr "" #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" #: share/advertising/09.pl:13 #, c-format msgid "Mandrakesoft Products" msgstr "Mandrakesoft vörur" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandrakesoft has developed a wide range of Mandrakelinux " "products." msgstr "" #: share/advertising/09.pl:17 #, c-format msgid "The Mandrakelinux 10.1 products are:" msgstr "" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "" #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "" #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandrakelinux 10.1 for x86-64, The Mandrakelinux solution for " "making the most of your 64-bit processor." msgstr "" #: share/advertising/10.pl:13 #, c-format msgid "Mandrakesoft Products (Nomad Products)" msgstr "" #: share/advertising/10.pl:15 #, c-format msgid "" "Mandrakesoft has developed two products that allow you to use Mandrakelinux " "on any computer and without any need to actually install it:" msgstr "" #: share/advertising/10.pl:16 #, c-format msgid "" "\t* Move, a Mandrakelinux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" #: share/advertising/10.pl:17 #, c-format msgid "" "\t* GlobeTrotter, a Mandrakelinux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" #: share/advertising/11.pl:13 #, c-format msgid "Mandrakesoft Products (Professional Solutions)" msgstr "" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandrakesoft products designed to meet the professional " "needs:" msgstr "" #: share/advertising/11.pl:16 #, c-format msgid "\t* Corporate Desktop, The Mandrakelinux Desktop for Businesses." msgstr "" #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandrakelinux Server Solution." msgstr "" #: share/advertising/11.pl:18 #, c-format msgid "\t* Multi-Network Firewall, The Mandrakelinux Security Solution." msgstr "" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "Veldu uppáhalds gluggaumhverfið þitt" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/14.pl:13 #, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org" #: share/advertising/14.pl:15 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "" #: share/advertising/14.pl:17 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" #: share/advertising/14.pl:19 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Kontact" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "Flakka umInternetið" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "" #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "" #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "\t* Flytja skrár með KBear." #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "" #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "" #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "" #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "" #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "Þróunarumhverfi" #: share/advertising/19.pl:15 share/advertising/22.pl:15 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" #: share/advertising/20.pl:13 #, c-format msgid "Development Editors" msgstr "Þróunarumhverfi" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "" #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" #: share/advertising/21.pl:13 #, c-format msgid "Development Languages" msgstr "Þróunarforritunarmál" #: share/advertising/21.pl:15 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" #: share/advertising/21.pl:16 #, c-format msgid "\t* The famous C language." msgstr "" #: share/advertising/21.pl:17 #, c-format msgid "\t* Object oriented languages:" msgstr "" #: share/advertising/21.pl:18 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:19 #, c-format msgid "\t\t* Java™" msgstr "\t\t* Java™" #: share/advertising/21.pl:20 #, c-format msgid "\t* Scripting languages:" msgstr "\t* Skriftuforritunarmál:" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:22 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:23 share/advertising/28.pl:22 #, c-format msgid "\t* And many more." msgstr "" #: share/advertising/22.pl:13 #, c-format msgid "Development Tools" msgstr "Þróunartæki" #: share/advertising/22.pl:17 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" #: share/advertising/23.pl:13 #, c-format msgid "Groupware Server" msgstr "Hóp miðlarar" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "\t* Senda og taka á móti pósti." #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "" #: share/advertising/24.pl:13 #, c-format msgid "Servers" msgstr "Þjónar" #: share/advertising/24.pl:15 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/24.pl:16 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" #: share/advertising/24.pl:17 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "\t* Apache: Mest notaði vefmiðlarinn." #: share/advertising/24.pl:18 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" #: share/advertising/24.pl:19 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" #: share/advertising/24.pl:21 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" #: share/advertising/25.pl:13 #, c-format msgid "Mandrakelinux Control Center" msgstr "Mandrakelinux Stjórnborð" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandrakelinux Control Center is an essential collection of " "Mandrakelinux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandrakesoft sells added value products and services to keep improving " "Mandrakelinux. If you want to support the open source philosophy " "and the development of Mandrakelinux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, c-format msgid "Online Store" msgstr "Vefverslun" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandrakesoft products and services, you can visit our " "e-commerce platform." msgstr "" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandrakesoft.com!" msgstr "" #: share/advertising/28.pl:13 #, c-format msgid "Mandrakeclub" msgstr "Mandrakeclub" #: share/advertising/28.pl:15 #, c-format msgid "" "Mandrakeclub is the perfect companion to your Mandrakelinux " "product.." msgstr "" #: share/advertising/28.pl:17 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandrakeclub, such as:" msgstr "" #: share/advertising/28.pl:18 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandrakesoft.com." msgstr "" #: share/advertising/28.pl:19 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" #: share/advertising/28.pl:20 #, c-format msgid "\t* Participation in Mandrakelinux user forums." msgstr "" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Early and privileged access, before public release, to " "Mandrakelinux ISO images." msgstr "" #: share/advertising/29.pl:13 #, c-format msgid "Mandrakeonline" msgstr "Mandrake beint" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandrakeonline is a new premium service that Mandrakesoft is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandrakeonline provides a wide range of valuable services for easily " "updating your Mandrakelinux systems:" msgstr "" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandrakelinux systems with one account." msgstr "" #: share/advertising/30.pl:13 #, c-format msgid "Mandrakeexpert" msgstr "Mandrakeexpert" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandrakesoft's technical experts on " "our technical support platform www.mandrakeexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandrakelinux experts, you will save " "a lot of time." msgstr "" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandrakelinux, you have the possibility to " "purchase support incidents at store.mandrakesoft.com." msgstr "" #: share/compssUsers.pl:25 #, c-format msgid "Office Workstation" msgstr "Skrifstofu-vinnustöð" #: share/compssUsers.pl:27 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Skrifstofu forrit: ritvinnsla (OpenOffice.org Writer, Kword), töflureiknar " "(OpenOffice.org Calc, Kspread) pdf skoðarar, o.s.frv" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Skrifstofu forrit: ritvinnsla (kword, abiword), töflureiknar (kspread, " "gnumeric) pdf skoðarar, o.s.frv" #: share/compssUsers.pl:33 #, c-format msgid "Game station" msgstr "Leikja-(vinnu)stöð" #: share/compssUsers.pl:34 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Leikjaforrit, skotleikir, borðleikir, herkænskuleikir og fleira" #: share/compssUsers.pl:37 #, c-format msgid "Multimedia station" msgstr "Margmiðlunar-vinnustöð" #: share/compssUsers.pl:38 #, c-format msgid "Sound and video playing/editing programs" msgstr "Spila og breyta hljóðskrám og kvikmyndum" #: share/compssUsers.pl:43 #, c-format msgid "Internet station" msgstr "Internet-vinnustöð" #: share/compssUsers.pl:44 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Tól og tæki til að lesa og senda póst og fréttir (mutt,tin...) og til að " "flakka á vefnum" #: share/compssUsers.pl:49 #, c-format msgid "Network Computer (client)" msgstr "Netbiðlarar" #: share/compssUsers.pl:50 #, c-format msgid "Clients for different protocols including ssh" msgstr "Biðlarar fyrir ýmsar samskiptareglur þ.m.t ssh" #: share/compssUsers.pl:54 #, c-format msgid "Configuration" msgstr "Stillingar" #: share/compssUsers.pl:55 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Tæki til að auðvelda uppsetningu tölvunnar" #: share/compssUsers.pl:59 #, c-format msgid "Console Tools" msgstr "Skjától" #: share/compssUsers.pl:60 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Ritlar, skeljar, skráartól, skjáhermar" #: share/compssUsers.pl:65 share/compssUsers.pl:165 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "C og C++ undirforritasöfn, forrit og lýsingaskrár" #: share/compssUsers.pl:69 share/compssUsers.pl:169 #, c-format msgid "Documentation" msgstr "Handbækur" #: share/compssUsers.pl:70 share/compssUsers.pl:170 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Bækur og leiðbeinngar um Linux og frjálsan hugbúnað" #: share/compssUsers.pl:74 share/compssUsers.pl:173 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:75 share/compssUsers.pl:174 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "" #: share/compssUsers.pl:85 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:88 #, c-format msgid "Groupware" msgstr "Hópvinnuforrit" #: share/compssUsers.pl:89 #, c-format msgid "Kolab Server" msgstr "Kolab Miðlari" #: share/compssUsers.pl:92 share/compssUsers.pl:133 #, c-format msgid "Firewall/Router" msgstr "Eldveggur/beinir" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Internet gateway" msgstr "Internet gátt" #: share/compssUsers.pl:96 #, c-format msgid "Mail/News" msgstr "Póstur/Fréttir" #: share/compssUsers.pl:97 #, c-format msgid "Postfix mail server, Inn news server" msgstr "Postfix póstþjónn, Inn fréttaþjónn" #: share/compssUsers.pl:100 #, c-format msgid "Directory Server" msgstr "" #: share/compssUsers.pl:104 #, c-format msgid "FTP Server" msgstr "FTP Miðlari" #: share/compssUsers.pl:105 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:108 #, c-format msgid "DNS/NIS" msgstr "DNS/NIS" #: share/compssUsers.pl:109 #, c-format msgid "Domain Name and Network Information Server" msgstr "Nafnaþjónar og upplýsingaveitur" #: share/compssUsers.pl:112 #, c-format msgid "File and Printer Sharing Server" msgstr "Skráar og prentmiðlari" #: share/compssUsers.pl:113 #, c-format msgid "NFS Server, Samba server" msgstr "NFS miðlari, Samba miðlari" #: share/compssUsers.pl:116 share/compssUsers.pl:129 #, c-format msgid "Database" msgstr "Gagnagrunnar" #: share/compssUsers.pl:117 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL og MySQL gagnagrunnsmiðlarar" #: share/compssUsers.pl:121 #, c-format msgid "Web/FTP" msgstr "Vefur/FTP" #: share/compssUsers.pl:122 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: share/compssUsers.pl:125 #, c-format msgid "Mail" msgstr "Póstur" #: share/compssUsers.pl:126 #, c-format msgid "Postfix mail server" msgstr "Postfix póstþjónn" #: share/compssUsers.pl:130 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL eða MySQL gagnagrunnsmiðlarar" #: share/compssUsers.pl:137 #, c-format msgid "Network Computer server" msgstr "Netþjónar" #: share/compssUsers.pl:138 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS-þjónn, SMB-þjónn, Proxy-þjónn ssh-þjónn" #: share/compssUsers.pl:146 #, c-format msgid "KDE Workstation" msgstr "KDE Vinnustöð" #: share/compssUsers.pl:147 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "KDE (K Desktop Environment). Gluggastjóri með safni hjálparforrita" #: share/compssUsers.pl:151 #, c-format msgid "GNOME Workstation" msgstr "Gnome vinnustöð" #: share/compssUsers.pl:152 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "Gluggastjóri með notendavænum forritum og skjáborðstólum" #: share/compssUsers.pl:155 #, c-format msgid "Other Graphical Desktops" msgstr "Aðrir gluggastjórar" #: share/compssUsers.pl:156 #, c-format msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, o.s.frv" #: share/compssUsers.pl:179 #, c-format msgid "Utilities" msgstr "Tól" #: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "SSH Þjónn" #: share/compssUsers.pl:186 #, c-format msgid "Webmin" msgstr "Webmin" #: share/compssUsers.pl:187 #, c-format msgid "Webmin Remote Configuration Server" msgstr "Webmin Vefstillingar á fjarlægri tölvu" #: share/compssUsers.pl:191 #, c-format msgid "Network Utilities/Monitoring" msgstr "Net forrit/Neteftirlit" #: share/compssUsers.pl:192 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:196 #, c-format msgid "Mandrakesoft Wizards" msgstr "Mandrakesoft Álfar" #: share/compssUsers.pl:197 #, c-format msgid "Wizards to configure server" msgstr "Álfar til að stilla miðlara" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrakelinux tools\n" " --incident - program should be one of mandrakelinux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandrakelinux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[Lyklaborð]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPTION]...\n" " --no-confirmation Ekki biðja um staðfestingu í upphafi " "MandrakeUpdate\n" " --no-verify-rpm Ekki staðfesta undiskriftir pakka\n" " --changelog-first Birta breytingalista á undan skráarlista í " "lýsingaglugga\n" " --merge-all-rpmnew Bjóðast til að bræða saman allar .rpmnew/.rpmsave " "skrár" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [allt]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" #: standalone.pm:133 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Notkun: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:61 #, c-format msgid "You need to reboot for changes to take effect" msgstr "Þú þarft að endurræsa áður en breytingar taka gildi" #: standalone/XFdrake:92 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Stimplaðu þig út og sláðu á Ctrl-Alt-Backspace" #: standalone/XFdrake:96 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:74 #, c-format msgid "Useless without Terminal Server" msgstr "" #: standalone/drakTermServ:106 standalone/drakTermServ:112 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:123 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s þarfnast vélarnafns, MAC addressu, IP, nbi-image, 0/1 fyrir " "THIN_CLIENT, 0/1 fyirr Local Config...\n" #: standalone/drakTermServ:129 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:211 standalone/drakTermServ:214 #, c-format msgid "Terminal Server Configuration" msgstr "Uppsetning skjámiðlara" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "Virkja þjón" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "Aftengja þjón" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "Ræsa þjón" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "Stöðva þjón" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Netræsi- disklingur/ISO" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "Bæta við/eyða notanda" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Myndir" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Fyrsti leiðarvísir" #: standalone/drakTermServ:325 standalone/drakTermServ:326 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:332 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:377 #, c-format msgid "Cancel Wizard" msgstr "Stöðva álfinn" #: standalone/drakTermServ:392 #, c-format msgid "Please save dhcpd config!" msgstr "Vinsamlega vista dhcpd uppsetningu!" #: standalone/drakTermServ:420 #, c-format msgid "Use thin clients." msgstr "" #: standalone/drakTermServ:422 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:444 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 #, c-format msgid "This will take a few minutes." msgstr "Þetta tekur nokkrar mínútur." #: standalone/drakTermServ:449 standalone/drakTermServ:468 #, c-format msgid "Done!" msgstr "Lokið!" #: standalone/drakTermServ:454 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:474 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:509 #, c-format msgid "Terminal Server Overview" msgstr "Yfirlit skjámiðlara" #: standalone/drakTermServ:510 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:516 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:534 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:554 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:566 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:570 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:575 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:584 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:605 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" #: standalone/drakTermServ:640 #, c-format msgid "Boot Floppy" msgstr "Ræsidisklingur" #: standalone/drakTermServ:642 #, c-format msgid "Boot ISO" msgstr "" #: standalone/drakTermServ:644 #, c-format msgid "PXE Image" msgstr "PXE ímynd" #: standalone/drakTermServ:712 #, c-format msgid "Default kernel version" msgstr "Sjálfgefin kjarnaútgáfa" #: standalone/drakTermServ:715 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:745 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: standalone/drakTermServ:753 #, c-format msgid "No kernel selected!" msgstr "" #: standalone/drakTermServ:756 #, c-format msgid "Build Single NIC -->" msgstr "" #: standalone/drakTermServ:760 #, c-format msgid "No NIC selected!" msgstr "Ekkert NIC valið!" #: standalone/drakTermServ:763 #, c-format msgid "Build All Kernels -->" msgstr "Byggja alla kjarna -->" #: standalone/drakTermServ:774 #, c-format msgid "<-- Delete" msgstr "<-- Eyða" #: standalone/drakTermServ:779 #, c-format msgid "No image selected!" msgstr "Engin ímynd valin!" #: standalone/drakTermServ:782 #, c-format msgid "Delete All NBIs" msgstr "Eyða öllum NBI" #: standalone/drakTermServ:908 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:913 #, c-format msgid "Add User -->" msgstr "Bæta við notanda -->" #: standalone/drakTermServ:919 #, c-format msgid "<-- Del User" msgstr "" #: standalone/drakTermServ:955 #, c-format msgid "type: %s" msgstr "tegund: %s" #: standalone/drakTermServ:959 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:989 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Leyfa staðbundna\n" "vélbúnaðarstillingar." #: standalone/drakTermServ:998 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1017 #, c-format msgid "Thin Client" msgstr "" #: standalone/drakTermServ:1021 #, c-format msgid "Allow Thin Clients" msgstr "" #: standalone/drakTermServ:1022 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1023 #, c-format msgid "Add Client -->" msgstr "Bæta við biðlara -->" #: standalone/drakTermServ:1037 #, c-format msgid "type: fat" msgstr "tegund: fat" #: standalone/drakTermServ:1038 #, c-format msgid "type: thin" msgstr "tegund: þunn" #: standalone/drakTermServ:1045 #, c-format msgid "local config: false" msgstr "Staðbundin uppsetning: nei" #: standalone/drakTermServ:1046 #, c-format msgid "local config: true" msgstr "Staðbundin uppsetning: já" #: standalone/drakTermServ:1054 #, c-format msgid "<-- Edit Client" msgstr "<-- Breyta biðlara" #: standalone/drakTermServ:1080 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1087 #, c-format msgid "Delete Client" msgstr "Eyða biðlara" #: standalone/drakTermServ:1096 #, c-format msgid "dhcpd Config..." msgstr "dhcpd uppsetning..." #: standalone/drakTermServ:1111 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1156 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1172 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1204 #, c-format msgid "Subnet:" msgstr "Staðarnet:" #: standalone/drakTermServ:1211 #, c-format msgid "Netmask:" msgstr "Netsía:" #: standalone/drakTermServ:1218 #, c-format msgid "Routers:" msgstr "Beinar:" #: standalone/drakTermServ:1225 #, c-format msgid "Subnet Mask:" msgstr "Staðarnetsía:" #: standalone/drakTermServ:1232 #, c-format msgid "Broadcast Address:" msgstr "Útvörpunarvistfang:" #: standalone/drakTermServ:1239 #, c-format msgid "Domain Name:" msgstr "Nafn léns:" #: standalone/drakTermServ:1247 #, c-format msgid "Name Servers:" msgstr "Nafnaþjónar:" #: standalone/drakTermServ:1258 #, c-format msgid "IP Range Start:" msgstr "" #: standalone/drakTermServ:1259 #, c-format msgid "IP Range End:" msgstr "" #: standalone/drakTermServ:1301 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1303 #, c-format msgid "Write Config" msgstr "Skrifa stillingar" #: standalone/drakTermServ:1319 #, c-format msgid "dhcpd Server Configuration" msgstr "dhcpd miðlara uppsetning" #: standalone/drakTermServ:1320 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: standalone/drakTermServ:1323 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: standalone/drakTermServ:1474 #, c-format msgid "Please insert floppy disk:" msgstr "Settu diskling í drif:" #: standalone/drakTermServ:1478 #, c-format msgid "Could not access the floppy!" msgstr "Enginn aðgangur að disklingadrifi!" #: standalone/drakTermServ:1480 #, c-format msgid "Floppy can be removed now" msgstr "Það má fjarlægja diskling núna" #: standalone/drakTermServ:1483 #, c-format msgid "No floppy drive available!" msgstr "Ekkert disklingadrif aðgengilegt!" #: standalone/drakTermServ:1488 #, c-format msgid "PXE image is %s/%s" msgstr "" #: standalone/drakTermServ:1490 #, c-format msgid "Error writing %s/%s" msgstr "Villa við að skrifa %s/%s" #: standalone/drakTermServ:1500 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1502 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1523 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: standalone/drakTermServ:1683 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1696 #, c-format msgid "%s is not a user..\n" msgstr "%s er ekki notandi..\n" #: standalone/drakTermServ:1697 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1699 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1701 #, c-format msgid "%s added to Terminal Server\n" msgstr "" #: standalone/drakTermServ:1718 #, c-format msgid "Deleted %s...\n" msgstr "Eyddi %s...\n" #: standalone/drakTermServ:1720 standalone/drakTermServ:1793 #, c-format msgid "%s not found...\n" msgstr "%s fannst ekki...\n" #: standalone/drakTermServ:1821 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: standalone/drakTermServ:1961 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "Stillingum breytt - endurræsa clusternfs/dhcpd?" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "Villa!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "" #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Uppsetning sjáfvirkrar innsetningar" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "endurspila" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "handvirkt" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Stillingar sjálfvirkra þrepa" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Bý til sjálfvirkan uppsetningar-diskling" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Settu annann tóman diskling í drif %s (fyrir rekladiskling)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Bý til sjálfvirkan uppsetningar-diskling (rekladiskur)" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 #: standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Til hamingju!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: standalone/drakautoinst:289 #, c-format msgid "Auto Install" msgstr "Sjáfvirk innsetning" #: standalone/drakautoinst:358 #, c-format msgid "Add an item" msgstr "Bæta við hlut" #: standalone/drakautoinst:365 #, c-format msgid "Remove the last item" msgstr "Fjarlægja síðasta hlut" #: standalone/drakbackup:88 #, c-format msgid "hd" msgstr "hd" #: standalone/drakbackup:88 #, c-format msgid "tape" msgstr "segulband" #: standalone/drakbackup:152 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:153 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:154 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:156 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:157 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Mismuna-afrit geymir aðeins skrár sem hafa breytst eða eru nýjar frá " "upprunalegu 'grunn' afriti." #: standalone/drakbackup:158 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:159 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:161 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:326 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:330 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:377 #, c-format msgid "Interval cron not available as non-root" msgstr "" #: standalone/drakbackup:462 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:466 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:475 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:477 #, c-format msgid "Old user list:\n" msgstr "" #: standalone/drakbackup:479 #, c-format msgid "New user list:\n" msgstr "" #: standalone/drakbackup:524 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, c-format msgid "Total progress" msgstr "Heildarframvinda" #: standalone/drakbackup:609 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:625 #, c-format msgid "Cannot spawn %s." msgstr "Get ekki ræst %s." #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:643 #, c-format msgid "Bad password on %s" msgstr "Rangt lykilorð á %s" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: standalone/drakbackup:645 #, c-format msgid "Can not find %s on %s" msgstr "Finn ekki %s á %s" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:697 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: standalone/drakbackup:701 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: standalone/drakbackup:722 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: standalone/drakbackup:726 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: standalone/drakbackup:731 #, c-format msgid "Not erasable media!" msgstr "" #: standalone/drakbackup:773 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: standalone/drakbackup:831 #, c-format msgid "Permission problem accessing CD." msgstr "" #: standalone/drakbackup:858 #, c-format msgid "No tape in %s!" msgstr "Ekkert segulband í %s!" #: standalone/drakbackup:965 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:984 standalone/drakbackup:1017 #, c-format msgid "Backup system files..." msgstr "Afrita kerfisskrár..." #: standalone/drakbackup:1018 standalone/drakbackup:1059 #, c-format msgid "Hard Disk Backup files..." msgstr "Afritaskrár á hörðum diski..." #: standalone/drakbackup:1058 #, c-format msgid "Backup User files..." msgstr "Afrita skrár notanda..." #: standalone/drakbackup:1093 #, c-format msgid "Backup Other files..." msgstr "Afrita aðrar skrár..." #: standalone/drakbackup:1094 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: standalone/drakbackup:1099 #, c-format msgid "No changes to backup!" msgstr "" #: standalone/drakbackup:1117 standalone/drakbackup:1141 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Drakbackup aðgerðir um %s:\n" "\n" #: standalone/drakbackup:1126 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: standalone/drakbackup:1127 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" #: standalone/drakbackup:1129 #, c-format msgid "file list sent by FTP: %s\n" msgstr "" #: standalone/drakbackup:1146 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1151 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1160 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" #: standalone/drakbackup:1161 #, c-format msgid " Error while sending mail. \n" msgstr " Villa við sendingu pósts. \n" #: standalone/drakbackup:1191 #, c-format msgid "Can not create catalog!" msgstr "" #: standalone/drakbackup:1420 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: standalone/drakbackup:1421 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: standalone/drakbackup:1422 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: standalone/drakbackup:1423 standalone/drakbackup:1487 #: standalone/drakbackup:1553 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, c-format msgid "Use Incremental Backups" msgstr "" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1427 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: standalone/drakbackup:1428 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Með þessum valkosti munt þú geta endurheimt allar útgáfur\n" " af /etc möppunni þinni." #: standalone/drakbackup:1459 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: standalone/drakbackup:1486 #, c-format msgid "Do not include the browser cache" msgstr "" #: standalone/drakbackup:1540 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: standalone/drakbackup:1541 standalone/drakfont:661 #, c-format msgid "Remove Selected" msgstr "Fjarlægja valið" #: standalone/drakbackup:1604 #, c-format msgid "Users" msgstr "Notendur" #: standalone/drakbackup:1624 #, c-format msgid "Use network connection to backup" msgstr "Nota nettengingu til afritunar" #: standalone/drakbackup:1626 #, c-format msgid "Net Method:" msgstr "Net aðferð:" #: standalone/drakbackup:1630 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1631 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1633 #, c-format msgid "Transfer Now" msgstr "Flytja núna" #: standalone/drakbackup:1635 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1638 #, c-format msgid "Host name or IP." msgstr "Heiti vélar eða IP." #: standalone/drakbackup:1643 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1655 #, c-format msgid "Remember this password" msgstr "Muna þetta lykilorð" #: standalone/drakbackup:1671 #, c-format msgid "Need hostname, username and password!" msgstr "" #: standalone/drakbackup:1762 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Nota CD-R/DVD-R til afritatöku" #: standalone/drakbackup:1765 #, c-format msgid "Choose your CD/DVD device" msgstr "Veldu CD/DVD tæki" #: standalone/drakbackup:1770 #, c-format msgid "Choose your CD/DVD media size" msgstr "Gefðu upp stærð CD/DVD diska" #: standalone/drakbackup:1777 #, c-format msgid "Multisession CD" msgstr "Viðbætanleg CD-lota" #: standalone/drakbackup:1779 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:1785 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Eyða gögnum á RW miðli (1. sinn)" #: standalone/drakbackup:1786 #, c-format msgid " Erase Now " msgstr " Eyða núna " #: standalone/drakbackup:1792 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:1794 #, c-format msgid "DVD-R media" msgstr "DVD-R miðill" #: standalone/drakbackup:1796 #, c-format msgid "DVDRAM device" msgstr "DVDRAM tæki" #: standalone/drakbackup:1827 #, c-format msgid "No CD device defined!" msgstr "Ekkert CD tæki valið!" #: standalone/drakbackup:1869 #, c-format msgid "Use tape to backup" msgstr "Nota segulband til afritatöku" #: standalone/drakbackup:1872 #, c-format msgid "Device name to use for backup" msgstr "" #: standalone/drakbackup:1878 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1884 #, c-format msgid "Do not rewind tape after backup" msgstr "Ekki spóla segulband til baka eftir afritun" #: standalone/drakbackup:1890 #, c-format msgid "Erase tape before backup" msgstr "Þurka út af segulbandi fyrir afritun" #: standalone/drakbackup:1896 #, c-format msgid "Eject tape after the backup" msgstr "" #: standalone/drakbackup:1968 #, c-format msgid "Enter the directory to save to:" msgstr "Gefðu upp möppu til vistunar:" #: standalone/drakbackup:1972 #, c-format msgid "Directory to save to" msgstr "Gefðu upp möppu til vistunar" #: standalone/drakbackup:1977 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: standalone/drakbackup:2041 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: standalone/drakbackup:2046 #, c-format msgid "HardDrive / NFS" msgstr "" #: standalone/drakbackup:2061 standalone/drakbackup:2062 #: standalone/drakbackup:2067 #, c-format msgid "hourly" msgstr "hverri klst" #: standalone/drakbackup:2061 standalone/drakbackup:2063 #: standalone/drakbackup:2068 #, c-format msgid "daily" msgstr "daglega" #: standalone/drakbackup:2061 standalone/drakbackup:2064 #: standalone/drakbackup:2069 #, c-format msgid "weekly" msgstr "vikulega" #: standalone/drakbackup:2061 standalone/drakbackup:2065 #: standalone/drakbackup:2070 #, c-format msgid "monthly" msgstr "mánaðarlega" #: standalone/drakbackup:2061 standalone/drakbackup:2066 #: standalone/drakbackup:2071 #, c-format msgid "custom" msgstr "sérsniðið" #: standalone/drakbackup:2075 #, c-format msgid "January" msgstr "janúar" #: standalone/drakbackup:2075 #, c-format msgid "February" msgstr "Febrúar" #: standalone/drakbackup:2075 #, c-format msgid "March" msgstr "Mars" #: standalone/drakbackup:2076 #, c-format msgid "April" msgstr "Apríl" #: standalone/drakbackup:2076 #, c-format msgid "May" msgstr "maí" #: standalone/drakbackup:2076 #, c-format msgid "June" msgstr "Júní" #: standalone/drakbackup:2076 #, c-format msgid "July" msgstr "Júlí" #: standalone/drakbackup:2076 #, c-format msgid "August" msgstr "Ágúst" #: standalone/drakbackup:2076 #, c-format msgid "September" msgstr "September" #: standalone/drakbackup:2077 #, c-format msgid "October" msgstr "Október" #: standalone/drakbackup:2077 #, c-format msgid "November" msgstr "Nóvember" #: standalone/drakbackup:2077 #, c-format msgid "December" msgstr "Desember" #: standalone/drakbackup:2080 #, c-format msgid "Sunday" msgstr "sunnudagur" #: standalone/drakbackup:2080 #, c-format msgid "Monday" msgstr "mánudagur" #: standalone/drakbackup:2080 #, c-format msgid "Tuesday" msgstr "þriðjudagur" #: standalone/drakbackup:2081 #, c-format msgid "Wednesday" msgstr "Miðvikudagur" #: standalone/drakbackup:2081 #, c-format msgid "Thursday" msgstr "Fimmtudagur" #: standalone/drakbackup:2081 #, c-format msgid "Friday" msgstr "föstudagur" #: standalone/drakbackup:2081 #, c-format msgid "Saturday" msgstr "laugardagur" #: standalone/drakbackup:2113 #, c-format msgid "Use daemon" msgstr "Nota þjón" #: standalone/drakbackup:2117 #, c-format msgid "Please choose the time interval between each backup" msgstr "Vinsamlega veldu tímabil milli afrita" #: standalone/drakbackup:2123 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2128 #, c-format msgid "Minute" msgstr "Mínúta" #: standalone/drakbackup:2132 #, c-format msgid "Hour" msgstr "Klukkustund" #: standalone/drakbackup:2136 #, c-format msgid "Day" msgstr "Dagur" #: standalone/drakbackup:2140 #, c-format msgid "Month" msgstr "Mánuður" #: standalone/drakbackup:2144 #, c-format msgid "Weekday" msgstr "Vikudag" #: standalone/drakbackup:2150 #, c-format msgid "Please choose the media for backup." msgstr "Veldu miðil fyrir afrit." #: standalone/drakbackup:2156 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: standalone/drakbackup:2157 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2158 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2205 #, c-format msgid "Please choose the compression type" msgstr "Vinsamlega veldu þjöppunartegund" #: standalone/drakbackup:2209 #, c-format msgid "Use .backupignore files" msgstr "Nota .backupignore skrár" #: standalone/drakbackup:2211 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: standalone/drakbackup:2217 #, c-format msgid "SMTP server for mail:" msgstr "SMTP miðlari fyrir póst:" #: standalone/drakbackup:2222 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: standalone/drakbackup:2262 #, c-format msgid "What" msgstr "Hvað" #: standalone/drakbackup:2267 #, c-format msgid "Where" msgstr "Hvar" #: standalone/drakbackup:2272 #, c-format msgid "When" msgstr "Hvenær" #: standalone/drakbackup:2277 #, c-format msgid "More Options" msgstr "Fleiri valkostir" #: standalone/drakbackup:2290 #, c-format msgid "Backup destination not configured..." msgstr "Áfangastaður afrits ekki skilreindur..." #: standalone/drakbackup:2310 standalone/drakbackup:4234 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackup uppsetning" #: standalone/drakbackup:2326 #, c-format msgid "Please choose where you want to backup" msgstr "Veldu hvert þú vilt taka afrit" #: standalone/drakbackup:2329 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" #: standalone/drakbackup:2329 #, c-format msgid "Across Network" msgstr "yfir net" #: standalone/drakbackup:2329 #, c-format msgid "On CD-R" msgstr "Á geisladisk" #: standalone/drakbackup:2329 #, c-format msgid "On Tape Device" msgstr "Áá segulband" #: standalone/drakbackup:2375 #, c-format msgid "Backup Users" msgstr "" #: standalone/drakbackup:2376 #, c-format msgid " (Default is all users)" msgstr " (Sjálfgefið er allir notendur)" #: standalone/drakbackup:2389 #, c-format msgid "Please choose what you want to backup" msgstr "Veldu hvað þú vilt afrita" #: standalone/drakbackup:2390 #, c-format msgid "Backup System" msgstr "Afrita kerfi" #: standalone/drakbackup:2392 #, c-format msgid "Select user manually" msgstr "" #: standalone/drakbackup:2421 #, c-format msgid "Please select data to backup..." msgstr "Veldu gögn sem skal afrita..." #: standalone/drakbackup:2493 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: standalone/drakbackup:2494 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: standalone/drakbackup:2496 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: standalone/drakbackup:2498 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: standalone/drakbackup:2500 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: standalone/drakbackup:2501 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: standalone/drakbackup:2509 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: standalone/drakbackup:2510 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2511 #, c-format msgid " on device: %s" msgstr " á tæki: %s" #: standalone/drakbackup:2512 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: standalone/drakbackup:2514 #, c-format msgid "\t\tErase=%s" msgstr "\t\tEyða=%s" #: standalone/drakbackup:2516 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2518 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: standalone/drakbackup:2519 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: standalone/drakbackup:2520 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Valkostir:\n" #: standalone/drakbackup:2521 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: standalone/drakbackup:2523 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: standalone/drakbackup:2524 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "\tBackups use tar only\n" msgstr "\tAfrit nota aðeins tar\n" #: standalone/drakbackup:2527 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tNota .backupignore skrár\n" #: standalone/drakbackup:2528 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: standalone/drakbackup:2529 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\tNota SMTP þjón %s\n" #: standalone/drakbackup:2531 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2532 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: standalone/drakbackup:2533 #, c-format msgid "\t-CD-R.\n" msgstr "" #: standalone/drakbackup:2534 #, c-format msgid "\t-Tape \n" msgstr "" #: standalone/drakbackup:2535 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: standalone/drakbackup:2536 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: standalone/drakbackup:2537 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: standalone/drakbackup:2538 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: standalone/drakbackup:2540 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: standalone/drakbackup:2545 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: standalone/drakbackup:2547 #, c-format msgid "- Restore System Files.\n" msgstr "- Endurheimta kerfisskrár.\n" #: standalone/drakbackup:2549 standalone/drakbackup:2559 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2552 #, c-format msgid "- Restore User Files: \n" msgstr "- Endurheimta notendaskrár: \n" #: standalone/drakbackup:2557 #, c-format msgid "- Restore Other Files: \n" msgstr "- Endurheimta aðrar skrár: \n" #: standalone/drakbackup:2736 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Listi af skemmdum gögnum:\n" "\n" #: standalone/drakbackup:2738 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Vinsamlega afveldu eða fjarlægðu næst." #: standalone/drakbackup:2748 #, c-format msgid "Backup files are corrupted" msgstr "" #: standalone/drakbackup:2769 #, c-format msgid " All of your selected data have been " msgstr "" #: standalone/drakbackup:2770 #, c-format msgid " Successfully Restored on %s " msgstr "" #: standalone/drakbackup:2890 #, c-format msgid " Restore Configuration " msgstr " Endurheimta uppsetningu " #: standalone/drakbackup:2918 #, c-format msgid "OK to restore the other files." msgstr "" #: standalone/drakbackup:2934 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: standalone/drakbackup:2999 #, c-format msgid "Please choose the date to restore:" msgstr "Gefðu upp dagsetningu sem á að endurheimta:" #: standalone/drakbackup:3036 #, c-format msgid "Restore from Hard Disk." msgstr "Endurheimta frá hörðum disk." #: standalone/drakbackup:3038 #, c-format msgid "Enter the directory where backups are stored" msgstr "Gefðu upp möppu þar sem afrit eru vistuð" #: standalone/drakbackup:3042 #, c-format msgid "Directory with backups" msgstr "Mappa með afritum" #: standalone/drakbackup:3096 #, c-format msgid "Select another media to restore from" msgstr "" #: standalone/drakbackup:3098 #, c-format msgid "Other Media" msgstr "Annar miðill" #: standalone/drakbackup:3103 #, c-format msgid "Restore system" msgstr "Endurheimta kerfið" #: standalone/drakbackup:3104 #, c-format msgid "Restore Users" msgstr "Endurheimta notendur" #: standalone/drakbackup:3105 #, c-format msgid "Restore Other" msgstr "Endurheimta annað" #: standalone/drakbackup:3107 #, c-format msgid "Select path to restore (instead of /)" msgstr "" #: standalone/drakbackup:3111 standalone/drakbackup:3393 #, c-format msgid "Path To Restore To" msgstr "Endurheimta í möppu" #: standalone/drakbackup:3114 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: standalone/drakbackup:3116 #, c-format msgid "Remove user directories before restore." msgstr "Fjarlægja heimsvæði notanda áður en endurheimt hefst." #: standalone/drakbackup:3201 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3204 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3222 #, c-format msgid "No matches found..." msgstr "Fann enga samsvörun..." #: standalone/drakbackup:3226 #, c-format msgid "Restore Selected" msgstr "Endurheimta val" #: standalone/drakbackup:3361 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3367 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: standalone/drakbackup:3376 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Endurheimta valdar\n" "Skrár" #: standalone/drakbackup:3453 #, c-format msgid "Backup files not found at %s." msgstr "Afrita skrár fundust ekki á %s." #: standalone/drakbackup:3466 #, c-format msgid "Restore From CD" msgstr "Endurheimta frá CD" #: standalone/drakbackup:3466 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3468 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3478 #, c-format msgid "Restore From Tape" msgstr "Endurheimta frá segulbandi" #: standalone/drakbackup:3478 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: standalone/drakbackup:3480 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network" msgstr "Endurheimta um net" #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: standalone/drakbackup:3492 #, c-format msgid "Host Name" msgstr "Vélarheiti" #: standalone/drakbackup:3493 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3500 #, c-format msgid "Password required" msgstr "Lykilorðs er þörf" #: standalone/drakbackup:3506 #, c-format msgid "Username required" msgstr "Notandanafns er þörf" #: standalone/drakbackup:3509 #, c-format msgid "Hostname required" msgstr "Þörf er á vélarheiti" #: standalone/drakbackup:3514 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3527 #, c-format msgid "Files Restored..." msgstr "Skrár endurheimtar..." #: standalone/drakbackup:3530 #, c-format msgid "Restore Failed..." msgstr "Endurheimting mistókst..." #: standalone/drakbackup:3548 #, c-format msgid "%s not retrieved..." msgstr "%s ekki sótt..." #: standalone/drakbackup:3770 standalone/drakbackup:3839 #, c-format msgid "Search for files to restore" msgstr "Leita að skrám til að endurheimta" #: standalone/drakbackup:3774 #, c-format msgid "Restore all backups" msgstr "Endurheimta öll afrit" #: standalone/drakbackup:3782 #, c-format msgid "Custom Restore" msgstr "Sérsniðin endurheimt" #: standalone/drakbackup:3786 standalone/drakbackup:3835 #, c-format msgid "Restore From Catalog" msgstr "Endurheimta frá lista" #: standalone/drakbackup:3807 #, c-format msgid "Unable to find backups to restore...\n" msgstr "" #: standalone/drakbackup:3808 #, c-format msgid "Verify that %s is the correct path" msgstr "Staðfestið að %s sé rétt slóð" #: standalone/drakbackup:3809 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3811 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3827 #, c-format msgid "CD in place - continue." msgstr "CD á réttum stað - áfram." #: standalone/drakbackup:3832 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3833 #, c-format msgid "Directory To Restore From" msgstr "Endurheimta frá möppu" #: standalone/drakbackup:3869 #, c-format msgid "Restore Progress" msgstr "Framvinda endurheimtu" #: standalone/drakbackup:3980 #, c-format msgid "Build Backup" msgstr "Byggja afrit" #: standalone/drakbackup:4013 standalone/drakbackup:4333 #, c-format msgid "Restore" msgstr "Endurheimta" #: standalone/drakbackup:4101 #, c-format msgid "The following packages need to be installed:\n" msgstr "Eftirfarandi pakka þarf að setja inn:\n" #: standalone/drakbackup:4128 #, c-format msgid "Please select data to restore..." msgstr "" #: standalone/drakbackup:4168 #, c-format msgid "Backup system files" msgstr "Afrita kerfisskrár" #: standalone/drakbackup:4171 #, c-format msgid "Backup user files" msgstr "Afrita skrár notanda" #: standalone/drakbackup:4174 #, c-format msgid "Backup other files" msgstr "Afrita aðrar skrár" #: standalone/drakbackup:4177 standalone/drakbackup:4211 #, c-format msgid "Total Progress" msgstr "Heildarframvinda" #: standalone/drakbackup:4203 #, c-format msgid "Sending files by FTP" msgstr "Sendi skrár með FTP" #: standalone/drakbackup:4206 #, c-format msgid "Sending files..." msgstr "Sendi skrár..." #: standalone/drakbackup:4276 #, c-format msgid "Backup Now from configuration file" msgstr "Afrita nú frá stillingaskrá" #: standalone/drakbackup:4281 #, c-format msgid "View Backup Configuration." msgstr "Skoða afritsstillingar." #: standalone/drakbackup:4307 #, c-format msgid "Wizard Configuration" msgstr "Álfa- uppsetning" #: standalone/drakbackup:4312 #, c-format msgid "Advanced Configuration" msgstr "Ítarlegri uppsetning" #: standalone/drakbackup:4317 #, c-format msgid "View Configuration" msgstr "Skoða stillingar" #: standalone/drakbackup:4321 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4326 #, c-format msgid "Backup Now" msgstr "" #: standalone/drakbackup:4330 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: standalone/drakbackup:4350 standalone/drakbackup:4353 #, c-format msgid "Drakbackup" msgstr "" #: standalone/drakboot:64 #, c-format msgid "Graphical boot theme selection" msgstr "Grafískt ræsiþema" #: standalone/drakboot:64 #, c-format msgid "System mode" msgstr "" #: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:187 #: standalone/harddrake2:188 standalone/logdrake:70 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/_Skrá" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/Skrá/_Hætta" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:188 #: standalone/logdrake:76 standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:148 #, c-format msgid "Install themes" msgstr "Setja inn þema" #: standalone/drakboot:149 #, c-format msgid "Create new theme" msgstr "Búa til nýtt þema" #: standalone/drakboot:161 #, c-format msgid "Use graphical boot" msgstr "" #: standalone/drakboot:166 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:167 #, c-format msgid "Do you want to configure it now?" msgstr "Viltu stilla það núna?" #: standalone/drakboot:177 #, c-format msgid "Theme" msgstr "Þema" #: standalone/drakboot:180 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: standalone/drakboot:189 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: standalone/drakboot:197 #, c-format msgid "No, I do not want autologin" msgstr "" #: standalone/drakboot:198 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: standalone/drakboot:201 #, c-format msgid "Default user" msgstr "Sjálfgefinn notandi" #: standalone/drakboot:202 #, c-format msgid "Default desktop" msgstr "Sjálfgefið skjáborð" #: standalone/drakboot:310 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, c-format msgid "Mandrakelinux Bug Report Tool" msgstr "Mandrakelinux villutilkynningar-tól" #: standalone/drakbug:46 #, c-format msgid "Mandrakelinux Control Center" msgstr "Mandrakelinux Stjórnborð" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "" #: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 #: standalone/drakbug:150 standalone/drakbug:154 #, c-format msgid "Standalone Tools" msgstr "Sjálfstæð tæki" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:51 #, c-format msgid "Mandrakeonline" msgstr "Mandrake beint" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msek" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Fjarstýring" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Hugbúnaðarstjóri" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "Windows flutningstól" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Stilli-álfar" #: standalone/drakbug:81 #, c-format msgid "Select Mandrakesoft Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Finna pakka" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Pakki: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Kjarni:" #: standalone/drakbug:100 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" #: standalone/drakbug:106 #, c-format msgid "Report" msgstr "Skýrsla" #: standalone/drakbug:163 #, c-format msgid "Not installed" msgstr "Ekki settur inn" #: standalone/drakbug:175 #, c-format msgid "Package not installed" msgstr "Pakki ekki settur inn" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "ekki skilgreint" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "Breyta tímabelti" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Tímabelti - DrakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Er klukkan í tölvunni stillt á GMT?" #: standalone/drakclock:75 #, c-format msgid "Network Time Protocol" msgstr "Net-tímamiðlari (NTP)" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "Tölvan getur samstillt klukkuna\n" " við net-tímamiðlara með NTP" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "Virkja net-tímamiðlara" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Miðlari:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "Gat ekki samstillt við %s." #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Frumstilla" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "Við þurfum að setja inn ntp pakkann\n" " til að virkja tímamiðlara\n" "\n" "Vilt þú setja upp ntp?" #: standalone/drakconnect:85 #, c-format msgid "Network configuration (%d adapters)" msgstr "Netstillingar (%d tengi)" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Gateway:" msgstr "Gátt:" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Interface:" msgstr "Tengi:" #: standalone/drakconnect:100 standalone/net_monitor:122 #, c-format msgid "Wait please" msgstr "Augnablik" #: standalone/drakconnect:116 #, c-format msgid "Interface" msgstr "Tengi" #: standalone/drakconnect:116 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "Staða" #: standalone/drakconnect:133 #, c-format msgid "Hostname: " msgstr "Vélarnafn: " #: standalone/drakconnect:135 #, c-format msgid "Configure hostname..." msgstr "Stilla vélarnafn..." #: standalone/drakconnect:149 standalone/drakconnect:842 #, c-format msgid "LAN configuration" msgstr "Staðarnets-uppsetning" #: standalone/drakconnect:154 #, c-format msgid "Configure Local Area Network..." msgstr "Stilla staðarnetstengingu..." #: standalone/drakconnect:162 standalone/drakconnect:246 #: standalone/drakconnect:250 #, c-format msgid "Apply" msgstr "Virkja" #: standalone/drakconnect:197 #, c-format msgid "Manage connections" msgstr "Sýsla með tengingar" #: standalone/drakconnect:224 #, c-format msgid "Device selected" msgstr "Tæki valið" #: standalone/drakconnect:305 #, c-format msgid "IP configuration" msgstr "IP uppsetning" #: standalone/drakconnect:344 #, c-format msgid "DNS servers" msgstr "Nafnamiðlarar (DNS)" #: standalone/drakconnect:352 #, c-format msgid "Search Domain" msgstr "Leita í léni" #: standalone/drakconnect:360 #, c-format msgid "static" msgstr "föst" #: standalone/drakconnect:360 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:470 #, c-format msgid "Metric" msgstr "" #: standalone/drakconnect:493 #, c-format msgid "Flow control" msgstr "Flæðistýring" #: standalone/drakconnect:494 #, c-format msgid "Line termination" msgstr "Endir á línu" #: standalone/drakconnect:505 #, c-format msgid "Modem timeout" msgstr "Mótaldstími rennur út" #: standalone/drakconnect:509 #, c-format msgid "Use lock file" msgstr "Nota læsiskrá" #: standalone/drakconnect:511 #, c-format msgid "Wait for dialup tone before dialing" msgstr "Bíða eftir sóni áður en hringt er" #: standalone/drakconnect:514 #, c-format msgid "Busy wait" msgstr "Upptekið-beðið í" #: standalone/drakconnect:519 #, c-format msgid "Modem sound" msgstr "Módaldshljóð" #: standalone/drakconnect:520 #, c-format msgid "Enable" msgstr "Virkja" #: standalone/drakconnect:520 #, c-format msgid "Disable" msgstr "Slökkva" #: standalone/drakconnect:571 standalone/harddrake2:48 #, c-format msgid "Media class" msgstr "" #: standalone/drakconnect:572 standalone/drakfloppy:136 #, c-format msgid "Module name" msgstr "Nafn einingar" #: standalone/drakconnect:573 #, c-format msgid "Mac Address" msgstr "Mac Adressa" #: standalone/drakconnect:574 standalone/harddrake2:26 #: standalone/harddrake2:118 #, c-format msgid "Bus" msgstr "Braut" #: standalone/drakconnect:575 standalone/harddrake2:32 #, c-format msgid "Location on the bus" msgstr "Staðsetning á braut" #: standalone/drakconnect:671 standalone/drakgw:247 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Ekkert netkort hefur fundist á kerfinu þínu. Vinsamlega keyrðu vélbúnaðar-" "uppsetningartólið." #: standalone/drakconnect:679 #, c-format msgid "Remove a network interface" msgstr "Fjarlægja nettengingu" #: standalone/drakconnect:683 #, c-format msgid "Select the network interface to remove:" msgstr "Veldu nettengi sem á að fjarlægja:" #: standalone/drakconnect:715 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Villa kom upp þegar reynt var að eyða nettenginu \"%s\":\n" "\n" "%s" #: standalone/drakconnect:716 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "Til hamingju, tekist hefur að fjarlægja nettengið \"%s\"" #: standalone/drakconnect:732 #, c-format msgid "No IP" msgstr "Engin IP" #: standalone/drakconnect:733 #, c-format msgid "No Mask" msgstr "Engin netsía" #: standalone/drakconnect:734 standalone/drakconnect:913 #, c-format msgid "up" msgstr "upp" #: standalone/drakconnect:734 standalone/drakconnect:913 #, c-format msgid "down" msgstr "niður" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Connected" msgstr "Tengdur" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Not connected" msgstr "Ótengdur" #: standalone/drakconnect:778 #, c-format msgid "Disconnect..." msgstr "Aftengja..." #: standalone/drakconnect:778 #, c-format msgid "Connect..." msgstr "Tengjast..." #: standalone/drakconnect:807 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "Aðvörun, önnur internettenging hefur fundist, kannski um staðarnetið" #: standalone/drakconnect:838 #, c-format msgid "Deactivate now" msgstr "Aftengja núna" #: standalone/drakconnect:838 #, c-format msgid "Activate now" msgstr "Virkja núna" #: standalone/drakconnect:846 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Þú hefur ekki neitt uppsett nettengi.\n" "Stilltu þau fyrst með því að smella á 'Stilla'" #: standalone/drakconnect:860 #, c-format msgid "LAN Configuration" msgstr "Staðarnets-uppsetning" #: standalone/drakconnect:872 #, c-format msgid "Adapter %s: %s" msgstr "Kort %s: %s" #: standalone/drakconnect:881 #, c-format msgid "Boot Protocol" msgstr "Ræsisamskiptaregla" #: standalone/drakconnect:882 #, c-format msgid "Started on boot" msgstr "Virkjað við ræsingu" #: standalone/drakconnect:918 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrakelinux Control Center" msgstr "" "Þetta nettengi hefur ekki verið stillt enn.\n" "Keyrið \"Bæta við tengingu\" aðstoðarálfinn frá Mandrakelinux stjórnborðinu" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:973 standalone/net_applet:50 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandrakelinux Control Center" msgstr "" "Þú hefur ekki skilgreint neina internettengingu.\n" "Keyrið \"%s\" aðstoðarálfinn frá Mandrakelinux stjórnborðinu" #: standalone/drakconnect:974 standalone/net_applet:51 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Setja upp nýja nettengingu (LAN, ISDN, ADSL, ...)" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "Internet uppsetning" #: standalone/drakconnect:999 #, c-format msgid "Third DNS server (optional)" msgstr "Þriðji nafnamiðlari (ekki krafist)" #: standalone/drakconnect:1021 #, c-format msgid "Internet Connection Configuration" msgstr "Internet uppsetning" #: standalone/drakconnect:1022 #, c-format msgid "Internet access" msgstr "Internet aðgengi" #: standalone/drakconnect:1024 standalone/net_monitor:101 #, c-format msgid "Connection type: " msgstr "Tegund tengingar: " #: standalone/drakconnect:1027 #, c-format msgid "Status:" msgstr "Staða:" #: standalone/drakedm:34 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "GDM (GNOME gluggastjóri)" #: standalone/drakedm:35 #, c-format msgid "KDM (KDE Display Manager)" msgstr "KDM (KDE gluggastjóri)" #: standalone/drakedm:36 #, c-format msgid "MdkKDM (Mandrakelinux Display Manager)" msgstr "MdkKDM (Mandrakelinux gluggastjóri)" #: standalone/drakedm:37 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X gluggastjóri)" #: standalone/drakedm:55 #, c-format msgid "Choosing a display manager" msgstr "Velja gluggastjóra" #: standalone/drakedm:56 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "X11 gluggastjóri leyfir þér að skrá þig inn á gluggakerfið um grafíska " "skjámynd\n" "ef X gluggakerfið er keyrandi og leyfir margar mismunandi X lotur í einu á " "þinni vél." #: standalone/drakedm:79 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "Breytingum er lokið, viltu endurræsa dm þjónustuna núna?" #: standalone/drakedm:80 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" "Öll keyrandi gluggaforrit verður lokað og núverandi lota mun tapast. Ert þú " "viss um að þú viljir rendurræsa dm þjónustuna?" #: standalone/drakfloppy:41 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:78 #, c-format msgid "Boot disk creation" msgstr "Búa til ræsidisk" #: standalone/drakfloppy:79 #, c-format msgid "General" msgstr "Almennt" #: standalone/drakfloppy:82 standalone/harddrake2:145 #, c-format msgid "Device" msgstr "Tæki" #: standalone/drakfloppy:88 #, c-format msgid "Kernel version" msgstr "Kjarna útgáfa" #: standalone/drakfloppy:103 #, c-format msgid "Preferences" msgstr "Valkostir" #: standalone/drakfloppy:117 #, c-format msgid "Advanced preferences" msgstr "Ítarlegri valkostir" #: standalone/drakfloppy:136 #, c-format msgid "Size" msgstr "Stærð" #: standalone/drakfloppy:139 #, c-format msgid "Mkinitrd optional arguments" msgstr "Mkinitrd auka-viðföng" #: standalone/drakfloppy:141 #, c-format msgid "force" msgstr "Þvinga" #: standalone/drakfloppy:142 #, c-format msgid "omit raid modules" msgstr "sleppa raid einingum" #: standalone/drakfloppy:143 #, c-format msgid "if needed" msgstr "ef þörf" #: standalone/drakfloppy:144 #, c-format msgid "omit scsi modules" msgstr "sleppa scsi einingum" #: standalone/drakfloppy:147 #, c-format msgid "Add a module" msgstr "Bæta við einingu" # ## skrytid #: standalone/drakfloppy:156 #, c-format msgid "Remove a module" msgstr "Fjarlægja einingu" #: standalone/drakfloppy:291 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Vertu viss um að miðill sé til staðar fyrir tæki %s" #: standalone/drakfloppy:297 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Það er enginn miðill eða hann er ritvarinn fyrir tæki %s.\n" "Vinsamlega settu inn miðil." #: standalone/drakfloppy:300 #, c-format msgid "Unable to fork: %s" msgstr "Get ekki kvíslað: %s" #: standalone/drakfloppy:303 #, c-format msgid "Floppy creation completed" msgstr "Disklingur tilbúinn" #: standalone/drakfloppy:303 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "Lokið hefur verið við að búa til ræsi-diskling \n" #. -PO: Do not alter the and tags #: standalone/drakfloppy:308 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Get ekki örugglega lokað mkbootdisk:\n" "\n" "%s" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "Leita að uppsettu letri" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "Afveljið uppsett letur" #: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "" #: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "Engin letur fundust" #: standalone/drakfont:217 standalone/drakfont:257 standalone/drakfont:324 #: standalone/drakfont:357 standalone/drakfont:365 standalone/drakfont:391 #: standalone/drakfont:409 standalone/drakfont:423 #, c-format msgid "done" msgstr "lokið" #: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "Gat ekki fundið nein letur á tengdum disksneiðum" #: standalone/drakfont:255 #, c-format msgid "Reselect correct fonts" msgstr "Endurvelja rétt letur" #: standalone/drakfont:258 #, c-format msgid "Could not find any font.\n" msgstr "Gat ekki fundið nein letur.\n" #: standalone/drakfont:268 #, c-format msgid "Search for fonts in installed list" msgstr "Leita að letri í uppsettum lista" #: standalone/drakfont:293 #, c-format msgid "%s fonts conversion" msgstr "%s leturbreytingar" #: standalone/drakfont:322 #, c-format msgid "Fonts copy" msgstr "Afrita letur" #: standalone/drakfont:325 #, c-format msgid "True Type fonts installation" msgstr "Innsetning True Type leturs" #: standalone/drakfont:332 #, c-format msgid "please wait during ttmkfdir..." msgstr "Vinsamega bíðið meðan ttmkfdir..." #: standalone/drakfont:333 #, c-format msgid "True Type install done" msgstr "True Type uppsetningu lokið" #: standalone/drakfont:339 standalone/drakfont:354 #, c-format msgid "type1inst building" msgstr "type1inst keyrir" #: standalone/drakfont:348 #, c-format msgid "Ghostscript referencing" msgstr "Ghostscript tilvitnanir" #: standalone/drakfont:358 #, c-format msgid "Suppress Temporary Files" msgstr "Fjarlægi tímabundnar skrár" #: standalone/drakfont:361 #, c-format msgid "Restart XFS" msgstr "Endurræsa XFS" #: standalone/drakfont:407 standalone/drakfont:417 #, c-format msgid "Suppress Fonts Files" msgstr "Stöðva notkun leturskráa" #: standalone/drakfont:419 #, c-format msgid "xfs restart" msgstr "enduræsi xfs" #: standalone/drakfont:427 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Áður en þú setur inn letur, staðfestu að þú hafir rétt til að nota og setja " "þá upp á þínu kerfi.\n" "\n" " Þú getur sett letur upp á venjulegan hátt. Í undantekningartilfellum hafa " "gallaðar leturskrár stöðvað X miðlarann." #: standalone/drakfont:476 standalone/drakfont:485 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:486 #, c-format msgid "Font List" msgstr "Leturlisti" #: standalone/drakfont:492 #, c-format msgid "About" msgstr "Um forrit" #: standalone/drakfont:494 standalone/drakfont:692 standalone/drakfont:730 #, c-format msgid "Uninstall" msgstr "Fjarlægja" #: standalone/drakfont:495 #, c-format msgid "Import" msgstr "Flytja inn" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:513 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" "Höfundaréttur (C) 2001-2002 hjá Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (upprunaleg útgáfa)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " #: standalone/drakfont:522 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:538 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "Þakkir:\n" "\n" " - pfm2afm: \n" "\t eftir Ken Borgendale:\n" "\t Breytir Windows .pfm skrá í .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t eftir James Macnicol: \n" "\t type1inst býr til skrárnar fonts.dir fonts.scale og Fontmap.\n" "\n" " - ttf2pt1: \n" "\t eftir Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Breytir ttf leturskrám í afm og pfb letur\n" #: standalone/drakfont:557 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Veldu þau forrit sem eiga að styðja við letrin:" #: standalone/drakfont:558 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Áður en þú setur inn letur, staðfestu að þú hafir rétt til að nota og setja " "þá upp á þínu kerfi.\n" "\n" " Þú getur sett letur upp á venjulegan hátt. Í undantekningartilfellum hafa " "gallaðar leturskrár stöðvað X miðlarann." #: standalone/drakfont:568 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:569 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:570 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:571 #, c-format msgid "Generic Printers" msgstr "Almennir prentarar" #: standalone/drakfont:587 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Veldu leturskrá eða möppu og smelltu á 'Bæta við'" #: standalone/drakfont:588 #, c-format msgid "File Selection" msgstr "Skráaval" #: standalone/drakfont:604 #, c-format msgid "You've not selected any font" msgstr "Þú hefur ekki valið neitt letur" #: standalone/drakfont:657 #, c-format msgid "Import fonts" msgstr "Flytja inn letur" #: standalone/drakfont:662 #, c-format msgid "Install fonts" msgstr "Setja inn letur" #: standalone/drakfont:697 #, c-format msgid "click here if you are sure." msgstr "smelltu hér ef þú ert viss." #: standalone/drakfont:699 #, c-format msgid "here if no." msgstr "hér ef þú ert það ekki." #: standalone/drakfont:738 #, c-format msgid "Unselected All" msgstr "Afvelja allt" #: standalone/drakfont:741 #, c-format msgid "Selected All" msgstr "Allt valið" #: standalone/drakfont:744 #, c-format msgid "Remove List" msgstr "Fjarlægja lista" #: standalone/drakfont:755 standalone/drakfont:774 #, c-format msgid "Importing fonts" msgstr "Flytja inn letur" #: standalone/drakfont:759 standalone/drakfont:779 #, c-format msgid "Initial tests" msgstr "Upprunalegar prófanir" #: standalone/drakfont:760 #, c-format msgid "Copy fonts on your system" msgstr "Afrita letur á kerfi þínu" #: standalone/drakfont:761 #, c-format msgid "Install & convert Fonts" msgstr "Setja upp og breyta letri" #: standalone/drakfont:762 #, c-format msgid "Post Install" msgstr "Eftir innsetningu" #: standalone/drakfont:780 #, c-format msgid "Remove fonts on your system" msgstr "Fjarlægja letur á þínu kerfi" #: standalone/drakfont:781 #, c-format msgid "Post Uninstall" msgstr "Eftirvinnsla" #: standalone/drakgw:58 standalone/drakgw:191 #, c-format msgid "Internet Connection Sharing" msgstr "Samnýting Internets tengingar" #: standalone/drakgw:111 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Því miður, við styðjum aðeins kjarna 2.4 eða nýrri." #: standalone/drakgw:122 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Internet samnýting er nú aftengd" #: standalone/drakgw:123 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Uppsetning internet samnýtingar hefur þegar verið framkvæmd.\n" "Hún er nú aftengd.\n" "\n" "Hvað vilt þú gera?" #: standalone/drakgw:127 standalone/drakvpn:127 #, c-format msgid "enable" msgstr "virkja" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "endurstilla" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735 #, c-format msgid "dismiss" msgstr "hætta við" #: standalone/drakgw:134 #, c-format msgid "Enabling servers..." msgstr "Virkja miðlara..." #: standalone/drakgw:146 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Samnýting Internetstengingar er nú virk." #: standalone/drakgw:149 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Internet samnýting er nú virk" #: standalone/drakgw:150 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Uppsetning internet samnýtingar hefur þegar verið framkvæmd.\n" "Hún er nú virk.\n" "\n" "Hvað vilt þú gera?" #: standalone/drakgw:154 standalone/drakvpn:101 #, c-format msgid "disable" msgstr "aftengja" #: standalone/drakgw:157 #, c-format msgid "Disabling servers..." msgstr "Aftengi miðlara..." #: standalone/drakgw:172 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Samnýting Internets tengingar er nú aftengd." #: standalone/drakgw:192 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" #: standalone/drakgw:236 #, c-format msgid "Interface %s (using module %s)" msgstr "Tengi %s (nota einingu %s)" #: standalone/drakgw:237 #, c-format msgid "Interface %s" msgstr "Tengi %s" #: standalone/drakgw:246 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "Ekkert nettengi á vélinni þinni!" #: standalone/drakgw:253 #, c-format msgid "Network interface" msgstr "Nettengi" #: standalone/drakgw:254 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Það er aðeins eitt netkort uppsett á vélinni þinni:\n" "\n" "%s\n" "\n" "Ég er að fara að setja upp staðarnet um það nettengi." #: standalone/drakgw:260 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Veldu netkort" #: standalone/drakgw:261 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Vinsamlega veldu hvaða nettengi verður tengt við staðarnetið þitt." #: standalone/drakgw:290 #, c-format msgid "Network interface already configured" msgstr "Nettenging þegar uppsett" #: standalone/drakgw:291 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Aðvörun, nettengið (%s) er þegar uppsett.\n" "\n" "Vilt þú framkvæma sjálfvirka endur-uppsetningu?\n" "\n" "Þú getur gert þetta handvirkt en þú verður að vita hvað þú ert að gera." #: standalone/drakgw:296 #, c-format msgid "Automatic reconfiguration" msgstr "Sjálfvirk enduruppsetning" #: standalone/drakgw:296 #, c-format msgid "No (experts only)" msgstr "Nei (aðeins f. sérfræðinga)" #: standalone/drakgw:297 #, c-format msgid "Show current interface configuration" msgstr "Sýna núverandi uppsetningar tengis" #: standalone/drakgw:298 #, c-format msgid "Current interface configuration" msgstr "Núverandi uppsetningar tengis" #: standalone/drakgw:299 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Núverandi uppsetning á `%s':\n" "\n" "Net: %s\n" "IP tala: %s\n" "IP breytur: %s\n" "Rekill: %s" #: standalone/drakgw:312 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: standalone/drakgw:319 #, c-format msgid "Local Network adress" msgstr "Staðbundið IP-vistfang" #: standalone/drakgw:323 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "DHCP Miðlarauppsetning.\n" "\n" "Hér getur þú valið mismunandi valkosti fyrir DHCP miðlara uppsetningu.\n" "Ef þú veist ekki hvað þessar breytur þýða, láttu þær þá bara eiga sig." #: standalone/drakgw:327 #, c-format msgid "(This) DHCP Server IP" msgstr "Vistfang (þessa) DHCP miðlara" #: standalone/drakgw:328 #, c-format msgid "The DNS Server IP" msgstr "Vistfang DNS þjóns" #: standalone/drakgw:329 #, c-format msgid "The internal domain name" msgstr "Nafn staðbundins léns" #: standalone/drakgw:330 #, c-format msgid "The DHCP start range" msgstr "Fyrsta IP-tala DHCP" #: standalone/drakgw:331 #, c-format msgid "The DHCP end range" msgstr "Loka IP-tala DHCP" #: standalone/drakgw:332 #, c-format msgid "The default lease (in seconds)" msgstr "Sjálfgefinn leigutími (í sekúndum)" #: standalone/drakgw:333 #, c-format msgid "The maximum lease (in seconds)" msgstr "Hámarksleigutími (í sekúndum)" #: standalone/drakgw:334 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Endurstilla nettengið og DHCP miðlarann" #: standalone/drakgw:341 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: standalone/drakgw:351 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" #: standalone/drakgw:361 #, c-format msgid "Configuring..." msgstr "Uppsetning..." #: standalone/drakgw:362 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278 #, c-format msgid "Problems installing package %s" msgstr "Vandræði við að setja inn pakka %s" #: standalone/drakgw:598 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 Mandrakesoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Höfundaréttur (C) 2003-2004 Mandrakesoft.\n" "þetta er frjáls hugbúnaður og má dreifa samakvæmt skilmálum GNU GPL.\n" "\n" "Notkun: \n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - Sýnir þessa hjálp \n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, c-format msgid "Mandrakelinux Help Center" msgstr "Mandrakelinux hjálp" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "Ekki hægt að sýna %s \n" ". Engin hjálparfærsla af þessari tegund\n" #: standalone/drakperm:22 #, c-format msgid "System settings" msgstr "Kerfisvalkostir" #: standalone/drakperm:23 #, c-format msgid "Custom settings" msgstr "Sérsniðnar stillingar" #: standalone/drakperm:24 #, c-format msgid "Custom & system settings" msgstr "Sérsniðin kerfisuppsetning" #: standalone/drakperm:44 #, c-format msgid "Editable" msgstr "Breytanlegt" #: standalone/drakperm:49 standalone/drakperm:321 #, c-format msgid "Path" msgstr "Slóð" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "User" msgstr "Notandi" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Hópur" #: standalone/drakperm:49 standalone/drakperm:333 #, c-format msgid "Permissions" msgstr "Aðgangsheimildir" #: standalone/drakperm:107 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Hér getur þú skoðað skrár til að breyta aðgangi, eigendum og hópum með " "msec.\n" "Þú getur einnig breytt þínum eigin reglum sem eru æðri þeim sjálfgefnu." #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "Núverandi öryggisþrep er %s.\n" "veldu heimildir til að skoða/breyta" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Upp" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "Færa valda reglu upp um eitt þrep" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Niður" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "Færa valda reglu niður um eitt þrep" #: standalone/drakperm:123 #, c-format msgid "Add a rule" msgstr "Bæta við reglu" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "Bæta við reglu aftast" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "Eyða valinni reglu" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:125 standalone/drakups:298 standalone/drakups:358 #: standalone/drakups:378 standalone/drakvpn:333 standalone/drakvpn:694 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "Sýsl" #: standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "Breyta núverandi reglu" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "flakka" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "eigandi" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "hópur" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "aðrir" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Lesa" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Leyfa \"%s\" að lesa skrána" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Skrifa" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Leyfa \"%s\" að skrifa í skrána" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Keyra" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Leyfa \"%s\" að keyra skrána" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "Lím-biti" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Notað fyrir möppur:\n" " aðeins eigandi möppunar eða skrár í þessari möppu má eyða henni" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "Setja-UID" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "Nota auðkenni eiganda í keyrslu" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "Setja-GID" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "Nota auðkenni hóps í keyrslu" #: standalone/drakperm:290 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Notandi:" #: standalone/drakperm:292 #, c-format msgid "Group:" msgstr "Hópur :" #: standalone/drakperm:296 #, c-format msgid "Current user" msgstr "Núverandi notandi" #: standalone/drakperm:297 #, c-format msgid "When checked, owner and group will not be changed" msgstr "Þegar merkt, þá verður eiganda og hóp ekki breytt" #: standalone/drakperm:307 #, c-format msgid "Path selection" msgstr "Val á slóð" #: standalone/drakperm:327 #, c-format msgid "Property" msgstr "Eiginleiki" #: standalone/drakpxe:55 #, c-format msgid "PXE Server Configuration" msgstr "PXE þjónsuppsetning" #: standalone/drakpxe:111 #, c-format msgid "Installation Server Configuration" msgstr "Stillingar uppsetningarmiðlara" #: standalone/drakpxe:112 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Þú ert um það bil að fara að setja tölvuna þína sem PXE miðlara sem DHCP " "miðlara\n" "og TFTP miðlara til að verða uppsetningarmiðlari.\n" "Með þessari uppsetningu, er hægt að setja upp aðrar tölvur á netinu með " "þessasem uppsetningarmiðil.\n" "Vertu viss um að þú hafir sett upp Net/Internet aðgang með drakconnect áður " "enlengra er haldið.\n" "Athugið: Þú verður að skilgreina net-kort til þess að geta sett upp " "staðarnet (LAN)." #: standalone/drakpxe:143 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Vinsamlega veldu hvaða nettengi verða notuð fyrir dhcp miðlarann." #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "Tengi %s (á neti %s)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "DHCP mðlarinn leyfir öðrum tölum að ræsa með því að nota PXE á eftirfarandi " "Adressu-bilum.\n" "\n" "Net IP-talan er %s með netsíu %s.\n" "\n" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "Fyrsta IP-tala DHCP" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "Loka IP-tala DHCP" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Vinsamlega gefðu upp staðsetningu uppsetningarímyndar.\n" "\n" "Ef þú hefur ekki núverandi möppu, vindamlega afritaðu innihald (DVD) " "geisladisksins.\n" "\n" #: standalone/drakpxe:192 #, c-format msgid "Installation image directory" msgstr "Uppsetningarmappa kjarna" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "fann engan ræsikjarna" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Engin Geisladiskur eða DVD fannst, vinsamlega afritaðu uppsetningarforritið " "og rpm skrár." #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Vinsamlega gefið upp hvar auto_install.cfg skráin er staðsett.\n" "\n" "Skildu þetta eftir autt ef þú vilt ekki fara í sjálfvirka uppsetningarham.\n" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "Staðsetning auto_install.cfg skrár" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "ALLT" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "STAÐBUNDIÐ" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "Hunsa" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:202 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Lýsing á svæðum:\n" "\n" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "(sjálfgefið gildi: %s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "Öryggisþrep:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "Öryggisfulltrúi:" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "Grunnvalkostir" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "Netvalkostir" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "Kerfisvalkostir" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "Reglulegar athuganir" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "Augnablik, stilli öryggisþrep..." #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "Augnablik stilli öryggisvalkosti..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Ekkert hljóðkort fannst!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Ekkert hljóðkort hefur fundist á tölvunni þinni. Vinssamlega athugaðu hvort " "hljóðkort sem stutt er af Linux sé rétt sett tengt. \n" "\n" "Þú getur leitað í vélbúnaðargagnagrunni á:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Athugið ef þú hefur ISA PnP hljóðkort þá verður þú að nota alsaconf eða " "sndconfig forritið. Sláðu bara inn skipunina \"alsaconf\" eða \"sndconfig\" " "á stjórnskjá." #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "pakkinn 'ImageMagick' verður að vera uppsettur til að ljúka uppsetningunni.\n" "smelltu á \"Í lagi\" til að setja inn 'ImageMagick' eða 'Hætta' til að stöðva" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "fyrsta skref" #: standalone/draksplash:71 #, c-format msgid "final resolution" msgstr "endanleg upplausn" #: standalone/draksplash:72 #, c-format msgid "choose image file" msgstr "Veldu myndskrá" #: standalone/draksplash:73 #, c-format msgid "Theme name" msgstr "Þema nafn" #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "Flakka" #: standalone/draksplash:93 standalone/draksplash:158 #, c-format msgid "Configure bootsplash picture" msgstr "Stilla upphafs-smellimynd" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "x hnit textaglugga\n" "í fjölda stafa" #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "y hnit textaglugga\n" "í fjölda stafa" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "Textabreidd" #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "hæð textaglugga" #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "x hnit framvindusúlu\n" "á efra vinstra horni" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "y hnit framvindusúlu\n" "á efra vinstra horni" #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr "breidd framvindusúlu" #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr "hæð framvindusúlu" #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr "litur framvindusúlu" #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "Forsýn" #: standalone/draksplash:121 #, c-format msgid "Save theme" msgstr "Vista þema" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "Veldu lit" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "Birta merki á stjórnskjá" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "Skilaboð frá kjarna eru sjálfgefið ekki sýnileg" #: standalone/draksplash:161 standalone/draksplash:309 #: standalone/draksplash:454 #, c-format msgid "Notice" msgstr "Tilkynning" #: standalone/draksplash:161 standalone/draksplash:309 #, c-format msgid "This theme does not yet have a bootsplash in %s!" msgstr "Þemað hefur ekki enn smellimynd í %s !" #: standalone/draksplash:167 #, c-format msgid "choose image" msgstr "Veldu myndskrá" #: standalone/draksplash:209 #, c-format msgid "saving Bootsplash theme..." msgstr "vista smellimynda-þema..." #: standalone/draksplash:435 #, c-format msgid "ProgressBar color selection" msgstr "Litaval framvindusúlu" #: standalone/draksplash:454 #, c-format msgid "You must choose an image file first!" msgstr "Þú verður að velja mynd fyrst!" #: standalone/draksplash:459 #, c-format msgid "Generating preview..." msgstr "Bý til forsýn..." #. -PO: First %s is theme name, second %s (in parenthesis) is resolution #: standalone/draksplash:497 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s Ræsiskjár (%s) forsýn" #. -PO: Do not alter the and tags #: standalone/draksplash:503 #, c-format msgid "" "The image \"%s\" cannot be load due to the following issue:\n" "\n" "%s" msgstr "" "Ekki er hægt að lesa myndina \"%s\" vegna eftirfarandi villu:\n" "\n" "%s" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "Tengdur um raðtengi eða USB kapal" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "Bæta við UPS tæki" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "Velkomin að UPS uppsetningarforritnu.\n" "\n" "Hér getur þú bætt nýjum varaaflgjafa við kerfið.\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" "Við munum nú bæta við UPS tæki.\n" "\n" "Viltu reyna að finna sjálfkrafa UPS tæki tengd þessari vél eða stilla það " "handvirkt?" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "Finna sjálfkrafa" #: standalone/drakups:101 standalone/harddrake2:231 #, c-format msgid "Detection in progress" msgstr "Leitun í gangi" #: standalone/drakups:120 standalone/drakups:156 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "Til hamingju" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "Álfurinn hefur bætt við eftirfarandi UPS tækjum:" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "Engin ný UPS tæki fundust" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "UPS rekil-stillingar" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "Vinsamlega veldu UPS tegund." #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "Framleiðandi / Tegund:" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" "Við erum að stilla \"%s\" UPS frá \"%s\".\n" "Vinsamlega fylltu út nafn, rekil og gátt." #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Nafn:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "Nafn varaaflgjafans" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "Rekillinn sem stýrir aflgjafanum" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Gátt:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "Gátt sem er tengd varaaflgjafanum" #: standalone/drakups:156 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "Álfurinn hefur nú sett upp nýjan \"%s\" varaaflgjafa." #: standalone/drakups:246 #, c-format msgid "UPS devices" msgstr "UPS tæki" #: standalone/drakups:247 standalone/drakups:266 standalone/drakups:282 #: standalone/harddrake2:83 standalone/harddrake2:109 #: standalone/harddrake2:116 #, c-format msgid "Name" msgstr "Nafn" #: standalone/drakups:265 #, c-format msgid "UPS users" msgstr "UPS notendur" #: standalone/drakups:281 #, c-format msgid "Access Control Lists" msgstr "Aðgangslistar" #: standalone/drakups:282 #, c-format msgid "IP mask" msgstr "IP sía" #: standalone/drakups:294 #, c-format msgid "Rules" msgstr "Reglur" #: standalone/drakups:295 #, c-format msgid "Action" msgstr "Aðgerð" #: standalone/drakups:295 standalone/drakvpn:1146 standalone/harddrake2:80 #, c-format msgid "Level" msgstr "Þrep" #: standalone/drakups:295 #, c-format msgid "ACL name" msgstr "ACL nafn" #: standalone/drakups:325 standalone/drakups:329 standalone/drakups:338 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:335 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "Velkomin að UPS uppsetningartólum" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "VPN tengingin er virk." #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "VPN tengingin hefur þegar verið sett upp.\n" "\n" "Hún er þegar virk.\n" "\n" "Hvað viltu gera?" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "Aftengi VPN..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "VPN tenging er nú óvirk." #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "VPN tengingin er nú óvirk" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "VPN tengingin hefur þegar verið sett upp.\n" "\n" "Hún er þegar óvirk.\n" "\n" "Hvað viltu gera?" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "Virkja VPN..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "VPN tenging er nú virk." #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "Einföld VPN upsetning." #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" "VPN tenging.\n" "\n" "Þetta forrit er byggt á eftirfarandi verkefnum:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - Handbækur og man síður koma með %s pakkunum\n" "\n" "Vinsamlega lestu AÐ MINNSTA KOSTI ipsec \"hverni-á-að\" leiðbeiningar\n" "áður en lengra er haldið." # ## skrytid #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "Kjarnaeining." #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" "Kjarninn þarf að styðja við ipsec.\n" "\n" "Þú ert að keyra kjarnaútgáfu %s.\n" "\n" "Kjarninn styður '%s'." #: standalone/drakvpn:292 #, c-format msgid "Security Policies" msgstr "Öryggisstefnur" #: standalone/drakvpn:292 #, c-format msgid "IKE daemon racoon" msgstr "IKE daemon racoon" #: standalone/drakvpn:295 standalone/drakvpn:306 #, c-format msgid "Configuration file" msgstr "Stillingarskrá" #: standalone/drakvpn:296 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" "Stillingaþrep!\n" "\n" "Þú þarft að skilgreina öryggisstefnu og síðan \n" "stilla sjálfvirka lyklamiðlaran - (IKE) þjóninn.\n" "KAME IKE þjónninn sem við notum heitir 'racoon'.\n" "\n" "Hvað vilt þú stilla?\n" #: standalone/drakvpn:307 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" "Næst, stillum við skrána %s.\n" "\n" "\n" "Smelltu einfaldlega á Næsta.\n" #: standalone/drakvpn:325 standalone/drakvpn:685 #, c-format msgid "%s entries" msgstr ", %s færslur" #: standalone/drakvpn:326 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" "Innihald skráarinnar %s\n" "er skipt í nokkra hluta.\n" "\n" "Þú getur nú:\n" "\n" " - sýna, bæta við, sýsla, eða fjarlægja hluta, síðan\n" " - setja inn breytingarnar\n" "\n" "Hvað vilt þú gera?\n" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "Sýna" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Commit" msgstr "Setja inn" #: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 #: standalone/drakvpn:713 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Sýna uppsetningu" #: standalone/drakvpn:352 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" "Skráin %s er ekki til.\n" "\n" "Þetta hlýtur að vera ný uppsetning.\n" "\n" "Þú verður að fara til baka og velja 'Bæta við'.\n" #: standalone/drakvpn:368 #, c-format msgid "ipsec.conf entries" msgstr "ipsec.conf færslur" #: standalone/drakvpn:369 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" "Skráin %s inniheldur mismunandi skráareiningar.\n" "\n" "Hér er beinagrind af henni:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "Þú getur nú bætt við einhverja af þessum skráareiningum.\n" "\n" "Veldu nú þá skráareiningu sem þú vilt bæta við.\n" #: standalone/drakvpn:376 #, c-format msgid "config setup" msgstr "config setup" #: standalone/drakvpn:376 #, c-format msgid "conn %default" msgstr "conn %default" #: standalone/drakvpn:376 #, c-format msgid "normal conn" msgstr "normal conn" #: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510 #, c-format msgid "Exists!" msgstr "Er til!" #: standalone/drakvpn:383 standalone/drakvpn:424 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" "Skráareining með þessu nafni er þegar til.\n" "Nöfn skráareiningarinnar verða að vera einkvæm.\n" "\n" "Þú verður að fara til baka og bæta við annari einingu\n" "eða breyta nafninu.\n" #: standalone/drakvpn:400 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" "Þessi skráareining verður að vera efst í\n" "%s skránni.\n" "\n" "Vertu viss um að allar aðrar skráaeiningar fylgi\n" "þessari uppsetningareiningu.\n" "\n" "Veldu halda áfram eða fyrri þegar þú ert búinn.\n" #: standalone/drakvpn:405 #, c-format msgid "interfaces" msgstr "tengi" #: standalone/drakvpn:406 #, c-format msgid "klipsdebug" msgstr "klipsdebug" #: standalone/drakvpn:407 #, c-format msgid "plutodebug" msgstr "plutodebug" #: standalone/drakvpn:408 #, c-format msgid "plutoload" msgstr "plutoload" #: standalone/drakvpn:409 #, c-format msgid "plutostart" msgstr "plutostart" #: standalone/drakvpn:410 #, c-format msgid "uniqueids" msgstr "einvkvauðk" #: standalone/drakvpn:444 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" "Þetta er fyrsta einingin eftir uppsetningareininguna\n" "\n" "Hér getur þú skilgreint sjálfgefnar stillingar. \n" "allar aðrar einingar fylgja þessari.\n" "ekki er nauðsynlegt að stilla vinstri hlið. Ef þúskilgreinir hana ekki hér, " "víðvært, þá getur\n" "þú skilgreint þær í hverri einingu.\n" #: standalone/drakvpn:451 #, c-format msgid "PFS" msgstr "PFS" #: standalone/drakvpn:452 #, c-format msgid "keyingtries" msgstr "LykilTilraunir" #: standalone/drakvpn:453 #, c-format msgid "compress" msgstr "Þjappa" #: standalone/drakvpn:454 #, c-format msgid "disablearrivalcheck" msgstr "AftengjaMóttAthugun" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "left" msgstr "Vinstri" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftcert" msgstr "VinstriSkírt" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftrsasigkey" msgstr "VinstriRSAlykill" #: standalone/drakvpn:458 standalone/drakvpn:497 #, c-format msgid "leftsubnet" msgstr "VinstraUndirnet" #: standalone/drakvpn:459 standalone/drakvpn:498 #, c-format msgid "leftnexthop" msgstr "VinstraNæstaHopp" #: standalone/drakvpn:488 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" "Skránni %s er skipt í nokkra hluta eða tengingar.\n" "\n" "Þú getur nú bætt við nýjum hluta.\n" "Veldu 'Áfram' þegar þú vilt skrá gögnin.\n" #: standalone/drakvpn:491 #, c-format msgid "section name" msgstr "Nafn hluta" #: standalone/drakvpn:492 #, c-format msgid "authby" msgstr "HeimilaðAf" #: standalone/drakvpn:493 #, c-format msgid "auto" msgstr "Sjálfvirkt" #: standalone/drakvpn:499 #, c-format msgid "right" msgstr "Hægri" #: standalone/drakvpn:500 #, c-format msgid "rightcert" msgstr "HægraSkírteini" #: standalone/drakvpn:501 #, c-format msgid "rightrsasigkey" msgstr "HægriRSALykill" #: standalone/drakvpn:502 #, c-format msgid "rightsubnet" msgstr "HægraUndirNet" #: standalone/drakvpn:503 #, c-format msgid "rightnexthop" msgstr "HægraNæstaHopp" #: standalone/drakvpn:511 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" "Kafli með þessu nafni er þegar til.\n" "Kaflanöfnin verða að vera einkvæm.\n" "\n" "Þú verður að fara til baka og bæta við öðrum\n" "kafla eða breyta nafni kaflans.\n" #: standalone/drakvpn:543 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Bæta við öryggisstefnu.\n" "\n" "Þú getur nú bætt við öryggisstefnu.\n" "\n" "Veldu síðan 'Áfram' til að skrifa gögnin.\n" #: standalone/drakvpn:576 standalone/drakvpn:826 #, c-format msgid "Edit section" msgstr "Sýsla með kafla" #: standalone/drakvpn:577 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" "%s skráin þín getur innihaldið nokkra kafla eða tengingar.\n" "\n" "Þú getur valið þann sem þú vilt sýsla með hér að neðan \n" "og smellt á 'Næsta'.\n" #: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 #: standalone/drakvpn:877 #, c-format msgid "Section names" msgstr "Nöfn kafla" #: standalone/drakvpn:590 #, c-format msgid "Can not edit!" msgstr "Get ekki breytt!" #: standalone/drakvpn:591 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" "Þú getur ekki sýslað með þennan kafla.\n" "\n" "Þessi kafli verður að vera fyrir Freeswan 2.X.\n" "Þú verður að skilgreina útgáfu 2.0 efst í skránni\n" "%s, og að lokum virkja eða aftengja \n" "tilviljanakenndu dulritunina.\n" #: standalone/drakvpn:600 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "Skráin %s hefur nokkra kafla.\n" "\n" "Þú getur nú sýslað með 'config setup' stillingar færslurnar.\n" "Veldu síðan 'Áfram' til að skrifa gögnin.\n" #: standalone/drakvpn:611 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "Skráin %s hefur nokkra kafla eða tengingar.\n" "\n" "Þú getur nú sýslað með sjálfgefnar færslur.\n" "Veldu síðan 'Áfram' til að skrifa gögnin.\n" #: standalone/drakvpn:624 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Skráin %s hefur marga kafla eða tengingar.\n" "\n" "Þú getur nú sýslað með venjulega kaflahluta.\n" "\n" "Veldu síðan 'Áfram' til að skrifa gögnin.\n" #: standalone/drakvpn:645 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Sýsla með öryggisstefnur.\n" "\n" "Þú getur nú sýslað með öryggisstefnur.\n" "\n" "Veldu síðan 'Áfram' til að skrifa gögnin.\n" #: standalone/drakvpn:656 standalone/drakvpn:873 #, c-format msgid "Remove section" msgstr "Fjarlægja hluta" #: standalone/drakvpn:657 standalone/drakvpn:874 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" "Skráin %s hefur marga kafla eða tengingar.\n" "\n" "Þú getur valið þann sem þú vilt fjarlægja hér að neðan \n" "og smella á 'Næst'.\n" #: standalone/drakvpn:686 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" "Stillingar racoon.conf skráarinnar.\n" "\n" "Þessi skrá er kaflaskipt.\n" "Þú getur nú:\n" " - display \t\t (sýna innihald skráar)\n" " - add\t\t\t (Bæta við kafla)\n" " - edit \t\t\t (breyta viðföngum í kafla)\n" " - remove \t\t (fjarlægja kafla)\n" " - commit \t\t (skrifa breytingar í raunverulega skrá)" #: standalone/drakvpn:714 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" "Skráin %s er ekki til\n" "\n" "Þetta hlýtur að vera ný uppsetning.\n" "\n" "Þú verður að fara til baka og velja stillingar.\n" #: standalone/drakvpn:728 #, c-format msgid "racoonf.conf entries" msgstr "racoonf.conf færslur" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" "'Bæta við' kafla skrefið.\n" "\n" "Hér er beinagrind af racoon.conf skrá:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Veldu kafla sem þú vilt bæta við.\n" #: standalone/drakvpn:735 #, c-format msgid "path" msgstr "slóð" #: standalone/drakvpn:735 #, c-format msgid "remote" msgstr "fjarlæg" #: standalone/drakvpn:735 #, c-format msgid "sainfo" msgstr "SAuppl" #: standalone/drakvpn:743 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" "'Bæta við slóð' þrepið.\n" "\n" "Slóðarkaflinn verður að vera efst í racoon.conf skránni.\n" "\n" "Færðu músabendilinn yfir skírteinis-færsluna til að sækja hjálp." #: standalone/drakvpn:746 #, c-format msgid "path type" msgstr "slóðartegund" #: standalone/drakvpn:750 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" "path include path: tilgreinir slóð til að innifela\n" "skrá. Sjá Lesa inn skrá.\n" "\tDæmi: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: skilgreinir skrá sem inniheldur\n" "for-deili lykil fyrir ákveðin auðkenni. Sjá Pre-shared key File.\n" "\tDæmi: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) mun leita í þessari möppu\n" "ef skírteini eða beiðni um skírteini er móttekin.\n" "\tDæmi: path certificate '/etc/cert' ;\n" "\n" "Innifela skrá: lesa inn skrá \n" "aðrar skilgreiningraskrár geta verið innifaldar.\n" "\tDæmi: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Fyrirfram deild lykil skrá skilgreinir\n" "auðkenni og dulritunarlykil sem eru notaðir í fyrsta hluta\n" "For-deili-lykils auðkennisaðferðinni." #: standalone/drakvpn:770 standalone/drakvpn:863 #, c-format msgid "real file" msgstr "raunveruleg skrá" #: standalone/drakvpn:793 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "Vertu viss um að þú hafir þegar slóðarhlutan\n" "efst í racoon.conf skránni.\n" "\n" "Þú getur nú breytt fjarlægum stillingum.\n" "Veldu 'Áfram' eða 'Fyrra' þegar þú ert búinn.\n" #: standalone/drakvpn:810 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "Vertu viss um að þú sért með slóðarkaflann\n" "efst í %s skránni.\n" "\n" "Þú getur nú valið suppl stillingarnar.\n" "Veldu 'Áfram' eða 'Fyrri' þegar þú ert búinn.\n" #: standalone/drakvpn:827 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" "%s skráin inniheldur nokkra hluta eða tengingar.\n" "\n" "Þú getur valið hvern af þeim þú vilt sýsla við hér að neðan\n" "og smellt á 'Næsta'.\n" #: standalone/drakvpn:838 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:847 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:855 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:862 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:903 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" "Allt hefur verið stillt.\n" "\n" "Þú getur nú miðlað auðlindum þínum um internetið,\n" "á öruggan hátt, með VPN tengingu.\n" "\n" "Þú ættir að staðfesta að shorewall rásir séu opnar\n" "og stilltar." #: standalone/drakvpn:923 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:924 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:941 #, c-format msgid "Sainfo source protocol" msgstr "" #: standalone/drakvpn:942 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:956 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:957 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:974 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "PFS group" msgstr "PFS hópur" #: standalone/drakvpn:991 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:996 #, c-format msgid "Lifetime number" msgstr "Líftímatala" #: standalone/drakvpn:997 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "Lifetime unit" msgstr "Líftímaeining" #: standalone/drakvpn:1015 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1031 standalone/drakvpn:1116 #, c-format msgid "Encryption algorithm" msgstr "Dulritunaralgrím" #: standalone/drakvpn:1033 #, c-format msgid "Authentication algorithm" msgstr "Auðkennialgrím" #: standalone/drakvpn:1035 #, c-format msgid "Compression algorithm" msgstr "Þjöppunaralgrím" #: standalone/drakvpn:1036 #, c-format msgid "deflate" msgstr "Þjappa" #: standalone/drakvpn:1043 #, c-format msgid "Remote" msgstr "Nettengdur" #: standalone/drakvpn:1044 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1052 #, c-format msgid "Exchange mode" msgstr "Skiptiaðferð" #: standalone/drakvpn:1054 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1060 #, c-format msgid "Generate policy" msgstr "Búa til stefnu" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "off" msgstr "af" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "on" msgstr "á" #: standalone/drakvpn:1062 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1076 #, c-format msgid "Passive" msgstr "Þolmynd" #: standalone/drakvpn:1078 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1081 #, c-format msgid "Certificate type" msgstr "Tegund skírteinis" #: standalone/drakvpn:1083 #, c-format msgid "My certfile" msgstr "Mín skírt-skrá" #: standalone/drakvpn:1084 #, c-format msgid "Name of the certificate" msgstr "Nafn skírteinis" #: standalone/drakvpn:1085 #, c-format msgid "My private key" msgstr "Minn einkalykill" #: standalone/drakvpn:1086 #, c-format msgid "Name of the private key" msgstr "Nafn einkalykils" #: standalone/drakvpn:1087 #, c-format msgid "Peers certfile" msgstr "Tengi skírt-skrá" #: standalone/drakvpn:1088 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1089 #, c-format msgid "Verify cert" msgstr "Staðfesta skírt" #: standalone/drakvpn:1091 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1093 #, c-format msgid "My identifier" msgstr "Auðkenni mitt" #: standalone/drakvpn:1094 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1114 #, c-format msgid "Peers identifier" msgstr "Auðkenni tengis" #: standalone/drakvpn:1115 #, c-format msgid "Proposal" msgstr "Tillaga" #: standalone/drakvpn:1117 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Hash algorithm" msgstr "Hash algrím" #: standalone/drakvpn:1126 #, c-format msgid "DH group" msgstr "DH hópur" #: standalone/drakvpn:1133 #, c-format msgid "Command" msgstr "Skipun" #: standalone/drakvpn:1134 #, c-format msgid "Source IP range" msgstr "Uppruna IP-svæði" #: standalone/drakvpn:1135 #, c-format msgid "Destination IP range" msgstr "Áfanga IP-svæði" #: standalone/drakvpn:1136 #, c-format msgid "Upper-layer protocol" msgstr "Efri samskiptastaðall" #: standalone/drakvpn:1136 standalone/drakvpn:1143 #, c-format msgid "any" msgstr "hver sem er" #: standalone/drakvpn:1138 #, c-format msgid "Flag" msgstr "Fáni" #: standalone/drakvpn:1139 #, c-format msgid "Direction" msgstr "Stefna" #: standalone/drakvpn:1140 #, c-format msgid "IPsec policy" msgstr "IPsec stefna" #: standalone/drakvpn:1140 #, c-format msgid "ipsec" msgstr "ipsec" #: standalone/drakvpn:1140 #, c-format msgid "discard" msgstr "henda" #: standalone/drakvpn:1143 #, c-format msgid "Mode" msgstr "Hamur" #: standalone/drakvpn:1143 #, c-format msgid "tunnel" msgstr "rás" #: standalone/drakvpn:1143 #, c-format msgid "transport" msgstr "flutningsleið" #: standalone/drakvpn:1145 #, c-format msgid "Source/destination" msgstr "Upphaf/Áfangi" #: standalone/drakvpn:1146 #, c-format msgid "require" msgstr "Þarfnast" #: standalone/drakvpn:1146 #, c-format msgid "default" msgstr "sjálfgefið" #: standalone/drakvpn:1146 #, c-format msgid "use" msgstr "nota" #: standalone/drakvpn:1146 #, c-format msgid "unique" msgstr "einkvæm" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "USA (loftnet)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "USA (kapal)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "USA (kapal-hrc)" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Kanada (kapal)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "Japan (loftnet)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "Japan (kapal)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "Kína (loftnet)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "Vestur Evrópa" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Austur Evrópa" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "Frakkland [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "Nýja sjáland" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "Ástralska Optus kapal TV" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Vinsamleg,\n" "gefðu upp sjónvarpstaðal og land" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "Sjónvarpsstaðall:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "Svæði:" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "Leit að sjónvarpsrásum í gangi..." #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "Leita að sjónvarpsrásum" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Það kom upp villa við leit að sjónvarpsrásum" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "Njóttu dagsins!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Nú getur þú keyrt xawtv (undir X!) !\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "Ekkert sjónvarpskort fannst!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Ekkert sjónvrpskort hefur fundist á vélinni þinni. Vinsamlega athugið hvort " "sjónvarpskort sem stutt er af Linux sé rétt tengt og uppsett.\n" "\n" "\n" "Þú getur leitað í vélbúnaðargagnagrunni á:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/harddrake2:23 #, c-format msgid "Alternative drivers" msgstr "Aukareklar" #: standalone/harddrake2:24 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "listi af aukareklum fyrir þetta hljóðkort" #: standalone/harddrake2:27 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "Þetta er vélbúnaðarbrautin sem tækið er tengt á (þ.e. PCI USB,...)" #: standalone/harddrake2:29 standalone/harddrake2:144 #, c-format msgid "Bus identification" msgstr "Brautar auðkenning" #: standalone/harddrake2:30 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- PCI og USB tæki: þetta listar framleiðanda, tæki, undirnúmer framleiðanda " "og undirauðkenni PCI/USB" #: standalone/harddrake2:33 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- pci tæki: hér er skráð PCI rauf, tæki og tegund þessa spjalds\n" "- eide tæki: tækið er annað hvort herra eða þræll (master/slave)\n" "- scsi tæki: scsi braut og scsi tækis númer" #: standalone/harddrake2:36 #, c-format msgid "Drive capacity" msgstr "Diskstærð" #: standalone/harddrake2:36 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "sérstakir eiginleikar rekilsins (brennari og/eða DVD stuðningur)" #: standalone/harddrake2:37 #, c-format msgid "this field describes the device" msgstr "Þetta svæði lýsir tækinu" #: standalone/harddrake2:38 #, c-format msgid "Old device file" msgstr "Eldri tækisskrá" #: standalone/harddrake2:39 #, c-format msgid "old static device name used in dev package" msgstr "eldri föst tækisnöfn sem eru notuð í dev pakkanum" #: standalone/harddrake2:40 #, c-format msgid "New devfs device" msgstr "Nýtt devfs tæki" #: standalone/harddrake2:41 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "nýtt breytilegt tækisnafn útgefið af kjarna devfs" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:44 #, c-format msgid "Module" msgstr "Eining" #: standalone/harddrake2:44 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "eining GNU/LInux kjarnans sem meðhöndlar tækið" #: standalone/harddrake2:45 #, c-format msgid "Extended partitions" msgstr "Aukadisksneiðar" #: standalone/harddrake2:45 #, c-format msgid "the number of extended partitions" msgstr "fjöldi aukadisksneiða" #: standalone/harddrake2:46 #, c-format msgid "Geometry" msgstr "Snið" #: standalone/harddrake2:46 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "plötur/hausar/sneiðar snið disksins" #: standalone/harddrake2:47 #, c-format msgid "Disk controller" msgstr "Diskstýringar" #: standalone/harddrake2:47 #, c-format msgid "the disk controller on the host side" msgstr "diskstýring vélarhluta" #: standalone/harddrake2:48 #, c-format msgid "class of hardware device" msgstr "vélbúnaðarflokkur" #: standalone/harddrake2:49 standalone/harddrake2:81 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "Tegund" #: standalone/harddrake2:49 #, c-format msgid "hard disk model" msgstr "tegund harðs disks" #: standalone/harddrake2:50 #, c-format msgid "network printer port" msgstr "netgátt prentara" #: standalone/harddrake2:51 #, c-format msgid "Primary partitions" msgstr "Aðaldisksneiðar" #: standalone/harddrake2:51 #, c-format msgid "the number of the primary partitions" msgstr "númer aðaldisksneiða" #: standalone/harddrake2:52 #, c-format msgid "the vendor name of the device" msgstr "framleiðandanafn tækis" #: standalone/harddrake2:53 #, c-format msgid "Bus PCI #" msgstr "Brautar PCI #" #: standalone/harddrake2:53 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "Þetta er PCI brautin sem tækið er tengt á" #: standalone/harddrake2:54 #, c-format msgid "PCI device #" msgstr "PCI tæki #" #: standalone/harddrake2:54 #, c-format msgid "PCI device number" msgstr "PCI tækisnúmer" #: standalone/harddrake2:55 #, c-format msgid "PCI function #" msgstr "PCI fall#" #: standalone/harddrake2:55 #, c-format msgid "PCI function number" msgstr "PCI fallnúmer" #: standalone/harddrake2:56 #, c-format msgid "Vendor ID" msgstr "Framleiðandi" #: standalone/harddrake2:56 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "þetta er staðlað auðkennisnúmer framleiðanda" #: standalone/harddrake2:57 #, c-format msgid "Device ID" msgstr "Tækisnúmer" #: standalone/harddrake2:57 #, c-format msgid "this is the numerical identifier of the device" msgstr "þetta er auðkennisnúmer tækisins" #: standalone/harddrake2:58 #, c-format msgid "Sub vendor ID" msgstr "Undirnúmer framleiðanda" #: standalone/harddrake2:58 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "þetta er undirnúmer auðkennis framleiðanda" #: standalone/harddrake2:59 #, c-format msgid "Sub device ID" msgstr "Undirnúmer tækis" #: standalone/harddrake2:59 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "þetta er undirnúmer auðkennis tækisins" #: standalone/harddrake2:60 #, c-format msgid "Device USB ID" msgstr "USB ID tækis" #: standalone/harddrake2:60 #, c-format msgid ".." msgstr ".." #: standalone/harddrake2:64 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:64 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "GNU/Linux kjarninn keyrir endurtekna reikninga til að meta tímastuðla." "Niðurstaðan er geymd sem \"bogomips\" til að áætla \"hraða\" örgjörvans." #: standalone/harddrake2:65 #, c-format msgid "Cache size" msgstr "Stærð skyndiminnis" #: standalone/harddrake2:65 #, c-format msgid "size of the (second level) cpu cache" msgstr "Stærð á (annars þreps) skyndiminni örgjörva" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:68 #, c-format msgid "Coma bug" msgstr "Coma villa" #: standalone/harddrake2:68 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "Hvort þessi örgjörvi er haldinn Cyrix 6x86 Coma villunni" #: standalone/harddrake2:69 #, c-format msgid "Cpuid family" msgstr "Fjölskylduauðkenni örgjörva" #: standalone/harddrake2:69 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "Fjölskylda örgjörva (þ.e. 6 fyrir i686)" #: standalone/harddrake2:70 #, c-format msgid "Cpuid level" msgstr "Örgjörvaþrep" #: standalone/harddrake2:70 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "upplýsingaþrep sem hægt er að sækja með cpuid aðgerðinni" #: standalone/harddrake2:71 #, c-format msgid "Frequency (MHz)" msgstr "Tíðni (Mhz)" #: standalone/harddrake2:71 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "Tíðni örgjörva í MHz (Megarið sem er fyrsta nálgun á fjölda aðgerða sem " "örgjörvinn getur framkvæmt á sekúndu)" #: standalone/harddrake2:72 #, c-format msgid "Flags" msgstr "Flögg" #: standalone/harddrake2:72 #, c-format msgid "CPU flags reported by the kernel" msgstr "Örgjörvaflögg eins og þau eru gefin upp af kjarna" #: standalone/harddrake2:73 #, c-format msgid "Fdiv bug" msgstr "Fdiv villa" #: standalone/harddrake2:74 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Eldri Pentium örgjörvar voru með villu í fleytitölu-örgjörva sem olli " "ónákvæmni í útreikningum þegar fleytitöludeiling var framkvæmd (FDIV)" #: standalone/harddrake2:75 #, c-format msgid "Is FPU present" msgstr "Er Fpu til staðar" #: standalone/harddrake2:75 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "já þýðir að örgjörvinn hefur fleytitöluörgjörva" #: standalone/harddrake2:76 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Hvort fleytitölu-örgjörvinn hefur sérstakt ígrip" #: standalone/harddrake2:76 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "já þýðir að fleytitöluörgjörvinn hefur tengt sig sérstöku ígripi" #: standalone/harddrake2:77 #, c-format msgid "F00f bug" msgstr "F00f villa" #: standalone/harddrake2:77 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "Eldri pentium örgjörvar voru gallaðir og frusu þegar þeir þýddu F00F " "aðgerðina" #: standalone/harddrake2:78 #, c-format msgid "Halt bug" msgstr "Halt villa" #: standalone/harddrake2:79 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Sumir eldri i486DX örgjörvar gátu ekki snúið eðlilega til baka eftir að " "\"halt\" skipunin var framkvæmd" #: standalone/harddrake2:80 #, c-format msgid "sub generation of the cpu" msgstr "Undir-flokkur örgjörva" #: standalone/harddrake2:81 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "Ætt örgjörva (þ.e. 8 fyrir Pentium III,...)" #: standalone/harddrake2:82 #, c-format msgid "Model name" msgstr "Tegundarnafn" #: standalone/harddrake2:82 #, c-format msgid "official vendor name of the cpu" msgstr "Uppgefið örgjörvanafn framleiðanda" #: standalone/harddrake2:83 #, c-format msgid "the name of the CPU" msgstr "nafn örgjörvans" #: standalone/harddrake2:84 #, c-format msgid "Processor ID" msgstr "ID örgjörva" #: standalone/harddrake2:84 #, c-format msgid "the number of the processor" msgstr "númer örgjörvans" #: standalone/harddrake2:85 #, c-format msgid "Model stepping" msgstr "tegundar-stig" #: standalone/harddrake2:85 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "Stig örgjörvans (undirtegundar (útgáfu) númer)" #: standalone/harddrake2:86 #, c-format msgid "the vendor name of the processor" msgstr "örgjörvanafn framleiðanda" #: standalone/harddrake2:87 #, c-format msgid "Write protection" msgstr "Ritvörn" #: standalone/harddrake2:87 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "WP flaggið í CR0 vistfangi örgjörvans þvingar ritvörn á minnissvæði, og " "varnarþví óstýrðu aðgengi að minnisvæðum notanda (þ.e.a.s þetta er villuvörn)" #: standalone/harddrake2:91 #, c-format msgid "Floppy format" msgstr "Forsnið disklings" #: standalone/harddrake2:91 #, c-format msgid "format of floppies supported by the drive" msgstr "forsnið sem eru studd af disklingadrifinu" #: standalone/harddrake2:95 #, c-format msgid "Channel" msgstr "Rás" #: standalone/harddrake2:95 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI rás" #: standalone/harddrake2:96 #, c-format msgid "Disk identifier" msgstr "Diskauðkenni" #: standalone/harddrake2:96 #, c-format msgid "usually the disk serial number" msgstr "venjulega raðnúmer disksins" #: standalone/harddrake2:97 #, c-format msgid "Logical unit number" msgstr "Lógiskt númer tækis" #: standalone/harddrake2:97 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" "SCSI númerið (LUN). SCSI tæki sem eru tengd við tölvuna auðkennast einkvæmt\n" "með summu af brautarnúmeri, tækisnúmeri og lógísku tækisnúmeri" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:104 #, c-format msgid "Installed size" msgstr "Uppsett stærð" #: standalone/harddrake2:104 #, c-format msgid "Installed size of the memory bank" msgstr "Uppsett stærð minnisbanka" #: standalone/harddrake2:105 #, c-format msgid "Enabled Size" msgstr "Virk stærð" #: standalone/harddrake2:105 #, c-format msgid "Enabled size of the memory bank" msgstr "Virk stærð minnisbanka" #: standalone/harddrake2:106 #, c-format msgid "type of the memory device" msgstr "tegund minnistækis" #: standalone/harddrake2:107 #, c-format msgid "Speed" msgstr "Hraði" #: standalone/harddrake2:107 #, c-format msgid "Speed of the memory bank" msgstr "Hraði minnisbankans" #: standalone/harddrake2:108 #, c-format msgid "Bank connections" msgstr "Bankatengingar" #: standalone/harddrake2:109 #, c-format msgid "Socket designation of the memory bank" msgstr "Innstungur minnisbanka" #: standalone/harddrake2:113 #, c-format msgid "Device file" msgstr "Tækisskrá" #: standalone/harddrake2:113 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" "tækisskráin sem notuð er til að hafa samband við kjarnarrekil músarinnar" #: standalone/harddrake2:114 #, c-format msgid "Emulated wheel" msgstr "Hermt eftir skrunhjóli" #: standalone/harddrake2:114 #, c-format msgid "whether the wheel is emulated or not" msgstr "hvort líkt er eftir músarhjóli eða ekki" #: standalone/harddrake2:115 #, c-format msgid "the type of the mouse" msgstr "tegund músarinnar" #: standalone/harddrake2:116 #, c-format msgid "the name of the mouse" msgstr "nafn músarinnar" #: standalone/harddrake2:117 #, c-format msgid "Number of buttons" msgstr "Fjöldi hnappa" #: standalone/harddrake2:117 #, c-format msgid "the number of buttons the mouse has" msgstr "fjöldi hnappa sem músin hefur" #: standalone/harddrake2:118 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "tegund brautar sem músin þín er tengd" #: standalone/harddrake2:119 #, c-format msgid "Mouse protocol used by X11" msgstr "Músasamskiptaregla notuð af X11" #: standalone/harddrake2:119 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "samskiptareglan sem gluggakerfið notar til samskipta við músina" #: standalone/harddrake2:126 standalone/harddrake2:135 #: standalone/harddrake2:142 standalone/harddrake2:150 #: standalone/harddrake2:316 #, c-format msgid "Identification" msgstr "Auðkenning" #: standalone/harddrake2:127 standalone/harddrake2:143 #, c-format msgid "Connection" msgstr "Tenging" #: standalone/harddrake2:136 #, c-format msgid "Performances" msgstr "Afköst" #: standalone/harddrake2:137 #, c-format msgid "Bugs" msgstr "Villur" #: standalone/harddrake2:138 #, c-format msgid "FPU" msgstr "FPU" #: standalone/harddrake2:146 #, c-format msgid "Partitions" msgstr "Disksneiðar" #: standalone/harddrake2:151 #, c-format msgid "Features" msgstr "Eiginleikar" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:174 standalone/logdrake:77 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/_Valkostir" #: standalone/harddrake2:175 standalone/harddrake2:197 standalone/logdrake:79 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/_Hjálp" #: standalone/harddrake2:179 #, c-format msgid "/Autodetect _printers" msgstr "/Finna _prentara sjálfkrafa" #: standalone/harddrake2:180 #, c-format msgid "/Autodetect _modems" msgstr "/Finna _motöld sjálfkrafa" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Finna _jaz drif sjálfkrafa" #: standalone/harddrake2:188 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:188 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/_Hætta" #: standalone/harddrake2:199 #, c-format msgid "/_Fields description" msgstr "/_Lýsing svæða" #: standalone/harddrake2:201 #, c-format msgid "Harddrake help" msgstr "Harddrake hjálp" #: standalone/harddrake2:210 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Þegar þú hefur valið tæki, sérð þú upplýsingar um tækið í svæðunum í " "gluggnum hægra megin (\"Upplýsingar\")" #: standalone/harddrake2:216 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_Senda villutilkynningu" #: standalone/harddrake2:218 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_Um..." #: standalone/harddrake2:219 #, c-format msgid "About Harddrake" msgstr "Um Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:221 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Þetta er HardDrake, vélbúnaðarstillitól %s.\n" "Útgáfa: %s\n" "Höfundur: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: standalone/harddrake2:238 #, c-format msgid "Harddrake2" msgstr "HardDrake2" #: standalone/harddrake2:253 #, c-format msgid "Detected hardware" msgstr "fundinn vélbúnaður" #: standalone/harddrake2:258 #, c-format msgid "Configure module" msgstr "Stilla einingu" #: standalone/harddrake2:265 #, c-format msgid "Run config tool" msgstr "keyra stillieiningu" #: standalone/harddrake2:303 standalone/net_monitor:108 #: standalone/net_monitor:109 standalone/net_monitor:114 #, c-format msgid "unknown" msgstr "óþekkt" #: standalone/harddrake2:304 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "Óþekkt" #: standalone/harddrake2:324 #, c-format msgid "Misc" msgstr "Ýmisl" #: standalone/harddrake2:339 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "Smelltu á tæki í vinstri glugganum til að birta upplýsingar hér." #: standalone/harddrake2:391 #, c-format msgid "secondary" msgstr "auka" #: standalone/harddrake2:391 #, c-format msgid "primary" msgstr "aðal" #: standalone/harddrake2:395 #, c-format msgid "burner" msgstr "Brennari" #: standalone/harddrake2:395 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:525 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:530 #, c-format msgid "Account:" msgstr "Tenging:" #: standalone/harddrake2:531 #, c-format msgid "Password:" msgstr "Lykilorð:" #: standalone/harddrake2:532 #, c-format msgid "Hostname:" msgstr "Vélarheiti:" #: standalone/keyboarddrake:29 #, c-format msgid "Please, choose your keyboard layout." msgstr "Vinsamlega veldu lyklaborðsútlit." #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Viltu að Backspace lykilinn skili Delete í skjáham?" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:67 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "Breytingar hafa verið gerðar, en til að virkja þær þá verður þú að stimpla " "þig út" #: standalone/logdrake:50 #, c-format msgid "Mandrakelinux Tools Logs" msgstr "Mandrakelinux tólaannálar" #: standalone/logdrake:51 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:64 #, c-format msgid "Show only for the selected day" msgstr "Sýna aðeins fyrir valinn dag" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/Skrá/_Ný" #: standalone/logdrake:71 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/Skrá/_Opna" #: standalone/logdrake:72 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "/Skrá/_Vista" #: standalone/logdrake:73 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/Skrá/Vista _sem" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/Skrá/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/Valkostir/Prófun" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/Hjálp/_Um..." #: standalone/logdrake:109 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "Auðkenni" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "Notendur" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "Almenn-skeyti" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "Kerfis-skeyti" #: standalone/logdrake:116 #, c-format msgid "search" msgstr "leita" #: standalone/logdrake:128 #, c-format msgid "A tool to monitor your logs" msgstr "Tól til að fylgjast með annálum" #: standalone/logdrake:129 standalone/net_monitor:99 #, c-format msgid "Settings" msgstr "Stillingar" #: standalone/logdrake:134 #, c-format msgid "Matching" msgstr "Passar við" #: standalone/logdrake:135 #, c-format msgid "but not matching" msgstr "en passar ekki við" #: standalone/logdrake:139 #, c-format msgid "Choose file" msgstr "Veldu skrá" #: standalone/logdrake:148 #, c-format msgid "Calendar" msgstr "Dagatal" #: standalone/logdrake:158 #, c-format msgid "Content of the file" msgstr "Innihald skrár" #: standalone/logdrake:162 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "Póstvöktun" #: standalone/logdrake:169 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "Aðvörunarálfurinn stöðvaði óvænt:" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "Augnablik vinn úr skrá: %s" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache World Wide Web miðlari" #: standalone/logdrake:377 #, c-format msgid "Domain Name Resolver" msgstr "Nafnauppflettingar léns" #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "Ftp miðlari" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Postfix póstþjónn" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Samba Miðlari" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Webmin Þjónusta" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Xinetd Þjónusta" #: standalone/logdrake:394 #, c-format msgid "Configure the mail alert system" msgstr "Stilla póstvöktunarkerfið" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "Stöðva póstvöktunarkerfið" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "Uppsetning póstvöktunar" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Velkomin að póstuppsetningarforritnu.\n" "\n" "Hér getur þú stillt viðvörunarkerfi.\n" #: standalone/logdrake:406 #, c-format msgid "What do you want to do?" msgstr "Hvað viltu gera næst?" #: standalone/logdrake:413 #, c-format msgid "Services settings" msgstr "Þjónustustillingar" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Þú fært póst ef ein af eftirfarandi þjónustum eru ekki lengur keyrandi" #: standalone/logdrake:421 #, c-format msgid "Load setting" msgstr "Álagsstillingar" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Þú færð póst ef álag er hærra en þetta gildi" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Álag" #: standalone/logdrake:428 #, c-format msgid "Alert configuration" msgstr "Viðvörunaruppsetning" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "Vinsamlega gefðu upp netfang þitt " #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "og gefðu upp nafn (eða IP) á SMTP miðlara sem þú vilt nota" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "Álfurinn hefur sett upp póstvaktþjónustu." #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "Álfurinn hefur aftengt póstvaktþjónustu." #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "Vista sem.." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Viinsamlega veldu músartegund." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Herma eftir þriðja hnapp?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Músaprófun" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Vinsamlega prófaðu músina:" #: standalone/net_applet:34 #, c-format msgid "Network is up on interface %s" msgstr "Net er í gangi á tengi %s" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:42 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "Net er ekki í gangi á tengi %s. Smelltu á \"Stilla net\"" #: standalone/net_applet:57 standalone/net_monitor:473 #, c-format msgid "Connect %s" msgstr "Tengist %s" #: standalone/net_applet:58 standalone/net_monitor:473 #, c-format msgid "Disconnect %s" msgstr "Aftengist %s" #: standalone/net_applet:59 #, c-format msgid "Monitor Network" msgstr "Neteftirlit" #: standalone/net_applet:60 #, c-format msgid "Configure Network" msgstr "Stilla nettengingu" #: standalone/net_applet:69 #, fuzzy, c-format msgid "Watched interface" msgstr "tengi" #: standalone/net_applet:78 #, c-format msgid "Profiles" msgstr "Snið" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/net_applet:61 standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "Endurnýja" #: standalone/net_applet:62 #, c-format msgid "Get Online Help" msgstr "Sækja nethjálp" #: standalone/net_applet:177 #, c-format msgid "Interactive intrusion detection" msgstr "Gagnvirk árásarvörn" #: standalone/net_applet:181 #, c-format msgid "Always launch on startup" msgstr "Ræsa alltaf þegar kveikt á vél" #: standalone/net_applet:230 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: standalone/net_applet:231 #, c-format msgid "The %s service has been attacked by %s." msgstr "" #: standalone/net_applet:232 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: standalone/net_applet:240 #, c-format msgid "Active Firewall: intrusion detected" msgstr "Active Firewall: árás skynjuð" #: standalone/net_applet:251 #, c-format msgid "Do you want to blacklist the attacker?" msgstr "Viltu setja árásaraðilann á svartan lista?" #: standalone/net_applet:265 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_applet:268 #, c-format msgid "Attack details" msgstr "Árásarupplýsingar" #: standalone/net_applet:272 #, c-format msgid "Attack time: %s" msgstr "" #: standalone/net_applet:273 #, c-format msgid "Network interface: %s" msgstr "Nettengi: %s" #: standalone/net_applet:274 #, c-format msgid "Attack type: %s" msgstr "Árásartegund: %s" #: standalone/net_applet:275 #, c-format msgid "Protocol: %s" msgstr "Samskiptaregla: %s" #: standalone/net_applet:276 #, c-format msgid "Attacker IP address: %s" msgstr "IP-tala árásartölvu: %s" #: standalone/net_applet:277 #, c-format msgid "Attacker hostname: %s" msgstr "Vélarnafn árásartölvu: %s" #: standalone/net_applet:278 #, c-format msgid "Service attacked: %s" msgstr "Ráðist á þjónustu: %s" #: standalone/net_applet:279 #, c-format msgid "Port attacked: %s" msgstr "Ráðist á gátt: %s" #: standalone/net_applet:280 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_monitor:61 standalone/net_monitor:66 #, c-format msgid "Network Monitoring" msgstr "Neteftirlit" #: standalone/net_monitor:104 #, c-format msgid "Global statistics" msgstr "Tölulegar upplýsingar" #: standalone/net_monitor:107 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:107 #, c-format msgid "Average" msgstr "Meðaltal" #: standalone/net_monitor:108 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "Sendi\n" "hraði:" #: standalone/net_monitor:109 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "Móttöku\n" "hraði:" #: standalone/net_monitor:113 #, c-format msgid "" "Connection\n" "time: " msgstr "Tengitími: " #: standalone/net_monitor:120 #, c-format msgid "Use same scale for received and transmitted" msgstr "Nota sama skala fyrir móttekið og sent" #: standalone/net_monitor:139 #, c-format msgid "Wait please, testing your connection..." msgstr "Augnablik, prófa tengingu..." #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Disconnecting from Internet " msgstr "Aftengjast frá Internetinu " #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Connecting to Internet " msgstr "Tengjast internetinu " #: standalone/net_monitor:232 #, c-format msgid "Disconnection from Internet failed." msgstr "Aftenging frá Internetinu mistókst." #: standalone/net_monitor:233 #, c-format msgid "Disconnection from Internet complete." msgstr "Aftengingu frá Internetinu lokið." #: standalone/net_monitor:235 #, c-format msgid "Connection complete." msgstr "Tenging uppsett." #: standalone/net_monitor:236 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrakelinux Control Center." msgstr "" "Tenging mistókst\n" "Athugaðu uppsetninguna í Mandrakelinux stjórnborði." #: standalone/net_monitor:340 #, c-format msgid "Color configuration" msgstr "Litauppsetning" #: standalone/net_monitor:388 standalone/net_monitor:408 #, c-format msgid "sent: " msgstr "sendi: " #: standalone/net_monitor:395 standalone/net_monitor:412 #, c-format msgid "received: " msgstr "móttók: " #: standalone/net_monitor:402 #, c-format msgid "average" msgstr "meðal" #: standalone/net_monitor:405 #, c-format msgid "Local measure" msgstr "Staðvær mæling" #: standalone/net_monitor:466 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "Viðvörun, skynja aðra Internettengingum kannski um staðarnetið þitt" #: standalone/net_monitor:477 #, c-format msgid "No internet connection configured" msgstr "Engin Internet uppsetning skilgreind" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "Les gögn um uppsetta prentara..." #: standalone/printerdrake:116 #, c-format msgid "%s Printer Management Tool" msgstr "%s Prentstjórnunartól" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/_Aðgerðir" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/_Bæta við Prentara" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/Setja sem _Sjálfgefið" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/_Sýsl" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/_Eyða" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/_F. sérfræðinga" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/_Endurnýja" #: standalone/printerdrake:146 #, c-format msgid "/_Configure CUPS" msgstr "/Stilla _CUPS" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "Leita:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "Beita síu" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "Heiti prentara" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "Tengitegund" #: standalone/printerdrake:218 #, c-format msgid "Server Name" msgstr "Nafn þjóns" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, c-format msgid "Add Printer" msgstr "Bæta við prentara" #: standalone/printerdrake:226 #, c-format msgid "Add a new printer to the system" msgstr "Bæta við nýjum prentara við kerfið" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "Setja sem sjálfgefið" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "Setja valinn prentara sem sjálfgefinn" #: standalone/printerdrake:232 #, c-format msgid "Edit selected printer" msgstr "Sýsla með valinn prentara" #: standalone/printerdrake:235 #, c-format msgid "Delete selected printer" msgstr "Eyða völdum prentara" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "Uppfæra lista" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS" msgstr "Stilla CUPS" #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS printing system" msgstr "Breyta CUPS prentkerfinu" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "Virkt" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "Óvirkt" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "Höfundar: " #. -PO: here %s is the version number #: standalone/printerdrake:570 #, c-format msgid "Printer Management %s" msgstr "Stjórnun prentara %s" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "SANE pakkinn þarf að vera uppsettur til að nota skanna.\n" "\n" "Viltu setja inn SANE pakkann?" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "Stöðva Scannerdrake." #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Gat ekki sett upp pakka sem þarf til að setja upp skanner með Scannerdrake." #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdrake mun ekki ræsa núna." #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "Leita að uppsettum myndskönnum..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "Leita að nýjum myndskönnum ..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "Endurgeri lista af uppsettum myndskönnum ..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "Það er ekki stuðningur fyrir %s í þessari útgáfu af%s." #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s fannst á %s, stilla sjálfkrafa?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s er ekki í grunni um myndskanna, stilla handvirkt?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Veldu tegund myndskanna" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Fann tegund: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Gátt: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "%s er ekki stutt af Linux." #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "Ekki setja inn vélbúnaðarskrá" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" "Það er mögulegt að %s þurfi að fá senda hugbúnaðuppsetningu í hvert sinn er " "kerfið er ræst." #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "Ef sú er raunin, þá getur þú látið það gerast sjálfkrafa." #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" "Til að gera það þarft þú að gefa upp vélbúnaðarskrá fyrir skannan svo hægt " "sé að setja hann inn." #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "Þú ættir að finna skrána á geisladisk eða disklingi sem fylgdi með " "skannanum, á heimasíðu fremleiðanda, eða á windows disksneið." #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "Setja inn vélbúnaðarskrá frá" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "Veljið vélbúnaðarskrá" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "Vélbúnaðarskráin %s er ekki til eða ólæsileg!" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" "Það er mögulegt að skanninn þinn þurfi að fá vélbúnaðarskrá senda í hvert " "sinn er kveikt er á þeim." #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" "Til að gera það þá þarft þú að gefa upp vélbúnaðarskrá fyrir skannann svo " "hægt sé að setja það inn." #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "Veljið vélbúnaðarskrá fyrir %s" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "Gat ekki sett inn vélbúnaðarskrá fyrir %s!" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "Enginn stuðningur við %s" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "%s verður að vera uppsettur af printerdrake.\n" "Þú getur ræst printerdrake frá %s stjórnborðinu í vélbúnaðar-" "uppsetningahluta." #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Leita að mögulegum gáttum" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "Vinsamlega veldu gátt þar sem %s er tengdur" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Athugið: Ekki er hægt að leita að hliðtengjum)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "veldu tæki" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "Leita að myndlesara..." #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "Hleð inn kjarnareklum..." #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "Athugið!" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "Síðan getur þú skannað skjöl með því að velja \"Xsane\" eða \"Kooka\" í " "margmiðlun-grafík valmyndinni." #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "%s þinn hefur nú verið stilltur\n" "Þú getur nú skannað skjöl með því að velja \"Xsane\" eða \"Kooka\" í " "margmiðlun-grafík valmyndinni." #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Eftirfarandi myndskannar\n" "\n" "%s\n" "eru tiltækir á kerfinu þínu\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Eftirfarandi myndskanni\n" "\n" "%s\n" "er tiltækur á kerfinu þínu\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Engir myndskannar fundust sem eru tiltækir fyrir kerfið þitt.\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Leita að tiltækum myndskönnum" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "Bæta við myndskanna handvirkt" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "Setja inn/Uppfæra vélbúnaðarfrumskrá" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "Miðlun myndskanna" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Allar aðrar vélar" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Þessi vél" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Hér getur þú valið hvort myndskanni tengur þessarri vél eigi að vera " "aðgengilegur frá öðrum vélum, og þá hvaða vélum." #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Þú getur einnig valið hvor myndskannar á fjarlægum vélum ættu að vera " "aðgengilegir frá þessari vél." #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Myndskannar á þessarri vél eru einnig aðgengilegir frá öðrum vélum" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "Miðla myndskanna til véla: " #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "Nota myndskanna á öðrum vélum" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "Nota myndskanna á vélum: " #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "Miðlun staðbundinna myndskanna" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Þetta eru vélarnar sem deila sínum staðbundnu myndskönnum, og ættu því að " "vera aðgengilegir:" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Bæta við vél" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Breyta valinni vél" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Fjarlægja valda vél" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "Nafn/IP-vistfang vélar:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "Veldu vélar þar sem staðbundnir myndskannar ættu að vera aðgengilegir:" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Þú verður að gefa upp vélarnafn eða IP-vistfang.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" "Þessi vél er nú þegar á listanum, þú getur ekki bætt henni við aftur.\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Nota myndskanna frá öðrum vélum" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Þetta eru vélarnar frá hverjum ætti að vera hægt að nota myndskanna:" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "saned þarf að vera uppsettur til að geta deilt lógískum skanna.\n" "\n" "Viltu setja inn saned pakkann?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Skanninn þinn verður ekki boðinn fram á netinu." #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Nokkur tæki í \"%s\" vélbúnaðarhlutanum voru fjarlægð:\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "- %s var fjarlægt\n" #: standalone/service_harddrake:108 #, c-format msgid "Some devices were added: %s\n" msgstr "Nokkrum tækjum var bætt við: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "- %s var bætt við\n" #: standalone/service_harddrake:204 #, c-format msgid "Hardware probing in progress" msgstr "Vélbúnaðarskönnun í gangi" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "Vélbúnaðarbreytingar í \"%s\" flokki (%s sekúndur til að svara)" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Viltu keyra viðeigandi stillingarforrit?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Veldu tungumál" #: steps.pm:15 #, c-format msgid "License" msgstr "Notkunarskilmálar" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Tilgreindu mús" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Leita að hörðum disk(um)" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Veldu innsetningarflokk" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Veldu lyklaborð" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Disksneiðing" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Forsníða disksneiðar" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Veldu pakka til að setja inn" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Setja kerfið inn" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "Lykilorð kerfisstjóra" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Bæta við notanda" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Stilla nettengingu" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Setja inn ræsistjóra" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Stilla X" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Setja upp þjónustur" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Setja inn uppfærslur" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Hætta innsetningu" #: ugtk2.pm:900 #, c-format msgid "Is this correct?" msgstr "Er þetta rétt?" #: ugtk2.pm:960 #, c-format msgid "No file chosen" msgstr "Engin skrá valin" #: ugtk2.pm:962 #, c-format msgid "You have chosen a file, not a directory" msgstr "" #: ugtk2.pm:964 #, c-format msgid "You have chosen a directory, not a file" msgstr "Þú hefur valið möppu, ekki skrá" #: ugtk2.pm:966 #, c-format msgid "No such directory" msgstr "Mappa ekki til" #: ugtk2.pm:966 #, c-format msgid "No such file" msgstr "Skráin er ekki til" #: ugtk2.pm:1045 #, c-format msgid "Expand Tree" msgstr "Opna tré" #: ugtk2.pm:1046 #, c-format msgid "Collapse Tree" msgstr "Loka tré" #: ugtk2.pm:1047 #, c-format msgid "Toggle between flat and group sorted" msgstr "Víxla milli flats lista og raðaðra hópa" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s er ekki sett upp\n" "Smelltu á \"Næsta\" til að setja upp eða \"Hætta við\" til að stöðva" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Innsetning mistókst" #, fuzzy #~ msgid "MandrakeSoft Wizards" #~ msgstr "Mandrakesoft Álfar" #~ msgid "" #~ "No browser is installed on your system, Please install one if you want to " #~ "browse the help system" #~ msgstr "" #~ "Enginn vafrari uppsettur á kerfinu. Vinsamlega settu upp vafra ef þú vilt " #~ "flakka um hjálparsíður" #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "Settu diskling í drifið\n" #~ "Öll gögn á þessum diskling tapast" #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "Settu tóman FAT forsniðinn diskling í drif %s" #~ msgid "This floppy is not FAT formatted" #~ msgstr "Þessi disklingur er ekki FAT forsniðinn" #~ msgid "Load/Save on floppy" #~ msgstr "Hlaða/Vista á diskling" #~ msgid "Load from floppy" #~ msgstr "Hlaða frá diskling" #~ msgid "Save on floppy" #~ msgstr "Vista á diskling" #~ msgid "Package selection" #~ msgstr "Val á pökkum" #~ msgid "Loading from floppy" #~ msgstr "Hleð inn frá diskling" #~ msgid "Insert a floppy containing package selection" #~ msgstr "Settu inn diskling sem inniheldur pakkaval" #~ msgid "" #~ "_: keyboard\n" #~ "Bengali" #~ msgstr "Bengalskt" #~ msgid "Application:" #~ msgstr "Forrit:" #~ msgid "Release: " #~ msgstr "Útgáfa: " #~ msgid "Summary: " #~ msgstr "Lýsing: " #~ msgid "Submit kernel version" #~ msgstr "Senda kjarnaútgáfu" #~ msgid "connecting to %s..." #~ msgstr "tengist %s..." #~ msgid "Please enter a package name." #~ msgstr "Vinsamlega sláðu inn pakkanafn." #~ msgid "Please enter summary text." #~ msgstr "Sláðu inn stutta lýsingu." #~ msgid "Loading printer configuration... Please wait" #~ msgstr "Hleð inn prentarastillingum... Augnablik" #~ msgid "Root password" #~ msgstr "Rótar-lykilorð" #~ msgid "Do you want to recover your system?" #~ msgstr "Viltu endurbyggja kerfið þitt?" #~ msgid "Move" #~ msgstr "Færa" #~ msgid "Which disk do you want to move it to?" #~ msgstr "Hvaða disk viltu færa til?" #~ msgid "Sector" #~ msgstr "Geiri" #~ msgid "Which sector do you want to move it to?" #~ msgstr "Hvaða geira viltu færa gögn til?" #~ msgid "Moving" #~ msgstr "Færi" #~ msgid "Moving partition..." #~ msgstr "Færi disksneið..." #~ msgid "Error opening %s for writing: %s" #~ msgstr "Villa við að opna %s til skriftar: %s" #~ msgid "" #~ "This is HardDrake, a Mandrakelinux hardware configuration tool.\n" #~ "Version: %s\n" #~ "Author: Thierry Vignaud <" #~ "tvignaud@mandrakesoft.com>\n" #~ "\n" #~ msgstr "" #~ "Þetta er HardDrake, vélbúnaðarstillitól Mandrakelinux.\n" #~ "Útgáfa: %s\n" #~ "Höfundur: Thierry Vignaud <" #~ "tvignaud@mandrakesoft.com>\n" #~ "\n" #~ msgid "OK" #~ msgstr "Í lagi" #~ msgid "NO" #~ msgstr "NEI" #~ msgid "" #~ "The following options can be set to customize your\n" #~ "system security. If you need an explanation, look at the help tooltip.\n" #~ msgstr "" #~ "Eftirfarandi aðgerðir er hægt að stilla til að sérsníða\n" #~ "öryggiskerfi þitt.. Ef þú þarfnast aðstoðar, líttu á vísbendingarnar.\n" #~ msgid "The %s is not known by this version of Scannerdrake." #~ msgstr "%s er óþekkt af þessarrí útgáfu af ScannerDrake" #~ msgid "Czech (QWERTZ)" #~ msgstr "Tékkneskt (QWERTZ)" #~ msgid "German" #~ msgstr "Þýskt" #~ msgid "Dvorak" #~ msgstr "Dvorak" #~ msgid "Spanish" #~ msgstr "Spænskt" #~ msgid "Finnish" #~ msgstr "Finnskt" #~ msgid "French" #~ msgstr "Franskt" #~ msgid "Norwegian" #~ msgstr "Norskt" #~ msgid "Polish" #~ msgstr "Pólskt" #~ msgid "Russian" #~ msgstr "Rússneskt" #~ msgid "Swedish" #~ msgstr "Sænskt" #~ msgid "Albanian" #~ msgstr "Albanskt" #~ msgid "Armenian (old)" #~ msgstr "Armenskt (gamalt)" #~ msgid "Armenian (typewriter)" #~ msgstr "Armenskt (hljóðfræðilegt)" #~ msgid "Armenian (phonetic)" #~ msgstr "Armenskt (hljóðfræðilegt)" #~ msgid "Arabic" #~ msgstr "Arabískt" #~ msgid "Azerbaidjani (latin)" #~ msgstr "Adzerbadjanskt (latneskt)" #~ msgid "Belgian" #~ msgstr "Belgískt" #~ msgid "Bengali" #~ msgstr "Bengalskt" #~ msgid "Bulgarian (phonetic)" #~ msgstr "Búlgarskt (hljóðfræðilegt)" #~ msgid "Bulgarian (BDS)" #~ msgstr "Búlgarskt (BDS)" #~ msgid "Brazilian (ABNT-2)" #~ msgstr "Brasilískt (ABNT 2)" #~ msgid "Bosnian" #~ msgstr "Bosnískt" #~ msgid "Belarusian" #~ msgstr "Hvít-Rússneskt" #~ msgid "Swiss (German layout)" #~ msgstr "Svissneskt (þýsk uppsetn.)" #~ msgid "Swiss (French layout)" #~ msgstr "Svissneskt (frönsk uppsetn.)" #~ msgid "Czech (QWERTY)" #~ msgstr "Tékkneskt (QWERTY)" #~ msgid "German (no dead keys)" #~ msgstr "Þýskt (engir dauðir lyklar)" #~ msgid "Devanagari" #~ msgstr "Devanagari" #~ msgid "Danish" #~ msgstr "Danskt" #~ msgid "Dvorak (US)" #~ msgstr "Dvorak (US)" #~ msgid "Dvorak (Norwegian)" #~ msgstr "Dvorak (Norskt)" #~ msgid "Dvorak (Swedish)" #~ msgstr "Dvorak (Sænskt)" #~ msgid "Estonian" #~ msgstr "Eistlenskt" #~ msgid "Georgian (\"Russian\" layout)" #~ msgstr "Georgískt (\"Rússneskt\")" #~ msgid "Georgian (\"Latin\" layout)" #~ msgstr "Georgískt (\"Latínu\")" #~ msgid "Greek" #~ msgstr "Grískt" #~ msgid "Gujarati" #~ msgstr "Gujarati" #~ msgid "Gurmukhi" #~ msgstr "Gurmukhi" #~ msgid "Hungarian" #~ msgstr "Ungverskt" #~ msgid "Croatian" #~ msgstr "Króatískt" #~ msgid "Israeli" #~ msgstr "Ísraelskt" #~ msgid "Israeli (Phonetic)" #~ msgstr "Ísraelískt (hljóðfr.)" #~ msgid "Iranian" #~ msgstr "Íranskt" #~ msgid "Icelandic" #~ msgstr "Íslenskt" #~ msgid "Italian" #~ msgstr "Ítalskt" #~ msgid "Inuktitut" #~ msgstr "Inuktitut" #~ msgid "Japanese 106 keys" #~ msgstr "Japanskt 106 lykla" #~ msgid "Kannada" #~ msgstr "Kanada" #~ msgid "Korean keyboard" #~ msgstr "Kóreskt lyklaborð" #~ msgid "Latin American" #~ msgstr "Suður amerískt" #~ msgid "Laotian" #~ msgstr "Laotian" #~ msgid "Lithuanian AZERTY (old)" #~ msgstr "Litháenískt AZERTY (gamalt)" #~ msgid "Lithuanian AZERTY (new)" #~ msgstr "Litháenískt AZERTY (nýtt)" #~ msgid "Lithuanian \"number row\" QWERTY" #~ msgstr "Litháenískt \"töluröð\" QWERTY" #~ msgid "Lithuanian \"phonetic\" QWERTY" #~ msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY" #~ msgid "Latvian" #~ msgstr "Lettneska" #~ msgid "Malayalam" #~ msgstr "Malayalam" #~ msgid "Macedonian" #~ msgstr "Makedónískt" #~ msgid "Myanmar (Burmese)" #~ msgstr "Myanmar (Búrmenskt)" #~ msgid "Mongolian (cyrillic)" #~ msgstr "Mongólskt (kýrílskt)" #~ msgid "Maltese (UK)" #~ msgstr "Maltneskt (UK)" #~ msgid "Maltese (US)" #~ msgstr "Maltneskt (US)" #~ msgid "Dutch" #~ msgstr "Hollenskt" #~ msgid "Oriya" #~ msgstr "Oriya" #~ msgid "Polish (qwerty layout)" #~ msgstr "Pólskt (qwerty)" #~ msgid "Polish (qwertz layout)" #~ msgstr "Pólskt (qwertz)" #~ msgid "Portuguese" #~ msgstr "Portúgalskt" #~ msgid "Canadian (Quebec)" #~ msgstr "Kanadískt (Quebec)" #~ msgid "Romanian (qwertz)" #~ msgstr "Rúmenskt (qwertz)" #~ msgid "Romanian (qwerty)" #~ msgstr "Rúmenskt (qwerty)" #~ msgid "Russian (Phonetic)" #~ msgstr "Rússneskt (hljóðfræðilegt)" #~ msgid "Saami (norwegian)" #~ msgstr "Saami (Norskt)" #~ msgid "Slovenian" #~ msgstr "Slóvenskt" #~ msgid "Slovakian (QWERTZ)" #~ msgstr "Slóvakískt (QWERTZ)" #~ msgid "Slovakian (QWERTY)" #~ msgstr "Slóvakískt (QWERTY)" #~ msgid "Serbian (cyrillic)" #~ msgstr "Serbneskt (kýrílskt)" #~ msgid "Syriac" #~ msgstr "Sýrland" #~ msgid "Syriac (phonetic)" #~ msgstr "Sýrlenskt (hljóðfræðilegt)" #~ msgid "Telugu" #~ msgstr "Telugu" #~ msgid "Tamil (ISCII-layout)" #~ msgstr "Tamílskt (ISCII uppsetning)" #~ msgid "Tamil (Typewriter-layout)" #~ msgstr "Tamílskt (ritvélaruppsetning)" #~ msgid "Thai keyboard" #~ msgstr "Tælenskt lyklaborð" #~ msgid "Tajik keyboard" #~ msgstr "Tajik lyklaborð" #~ msgid "Turkish (traditional \"F\" model)" #~ msgstr "Tyrkneskt (hefðbundið \"F\" módel)" #~ msgid "Turkish (modern \"Q\" model)" #~ msgstr "Tyrkneskt (nútíma \"Q\" módel)" #~ msgid "Ukrainian" #~ msgstr "Úkraínskt" #~ msgid "Uzbek (cyrillic)" #~ msgstr "Úsbeskt (kýrílskt)" #~ msgid "Vietnamese \"numeric row\" QWERTY" #~ msgstr "Víetnamskt \"töluröð\" QWERTY" #~ msgid "Yugoslavian (latin)" #~ msgstr "Júgoslavneskt (Latínu upps.)" #~ msgid "No devices found" #~ msgstr "Fann enginn tæki" #~ msgid "Enable multiple profiles" #~ msgstr "Virkja mörg snið" #~ msgid "" #~ "You now have the opportunity to download updated packages. These " #~ "packages\n" #~ "have been updated after the distribution was released. They may\n" #~ "contain security or bug fixes.\n" #~ "\n" #~ "To download these packages, you will need to have a working Internet \n" #~ "connection.\n" #~ "\n" #~ "Do you want to install the updates ?" #~ msgstr "" #~ "Þú hefur nú möguleika á að sækja uppfærða pakka. Þessir pakkar\n" #~ "hafa verið uppfærðir eftir að dreifingin ver send úr húsi. Þeir kunna\n" #~ "að innihalda villuleiðréttingar eða öryggisuppfærslur.\n" #~ "\n" #~ "Til að sækja þessa pakka þá verður þú að vera tengdur Internetinu.\n" #~ "\n" #~ "Viltu sækja uppfærslurnar?" #~ msgid "Installing bootloader" #~ msgstr "Setja inn ræsistjórann" # ## skrytid #~ msgid "" #~ "You may now provide options to module %s.\n" #~ "Options are in format ``name=value name2=value2...''.\n" #~ "For instance, ``io=0x300 irq=7''" #~ msgstr "" #~ "Þú getur núna gefið upp viðföng fyrir eininguna %s.\n" #~ "Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n" #~ "Til dæmis: ``io=0x300 irq=7''" #~ msgid "Configuring printer..." #~ msgstr "Setja upp prentara..." #~ msgid "Configuring applications..." #~ msgstr "Set upp forrit..." #~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "Fjarlægja þennan prentara frá Star Office/OpenOffice.org/GIMP" #~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "Bæta prentara við Star Office/OpenOffice.org/GIMP" #~ msgid "Installation of %s failed. The following error occurred:" #~ msgstr "Innsetning %s brást sökum eftirfarandi villu:" #~ msgid "Set of tools to read and send mail and news and to browse the Web" #~ msgstr "" #~ "Tól og tæki til að lesa og senda póst og fréttir og til að flakka á vefnum" #~ msgid "Use auto detection" #~ msgstr "Finna sjálfvirkt" #~ msgid "GRUB" #~ msgstr "GRUB" #~ msgid "/dev/hda" #~ msgstr "/dev/hda" #~ msgid "/dev/hdb" #~ msgstr "/dev/hdb" #~ msgid "/dev/fd0" #~ msgstr "/dev/fd0" #~ msgid "Delay before booting the default image" #~ msgstr "Töf áður en sjálfgefin ræsing byrjar" #~ msgid "" #~ "No ethernet network adapter has been detected on your system.\n" #~ "I cannot set up this connection type." #~ msgstr "" #~ "Ekkert netkort hefur fundist á tölvunni þinni, Ég get ekki\n" #~ "sett upp þessa tengingu." #~ msgid "" #~ "Please choose which network adapter you want to use to connect to " #~ "Internet." #~ msgstr "Veldu hvaða netkort þú notar til að tengjast Internetinu." #~ msgid "chunk size" #~ msgstr "stærð hlutar" #~ msgid "mkraid failed (maybe raidtools are missing?)" #~ msgstr "mkraid mistókst (kannski vantar raidtólin?)" #~ msgid "mkraid failed" #~ msgstr "mkraid mistókst" #~ msgid "Mandrake Online" #~ msgstr "Mandrake beint" #~ msgid "" #~ "Connection failed.\n" #~ "Verify your configuration in the Mandrake Control Center." #~ msgstr "" #~ "Tenging mistókst\n" #~ "Athugaðu uppsetninguna í Mandrake stjórnborði." #~ msgid "The package %s is needed. Install it?" #~ msgstr "Pakka %s er þörf, setja hann inn?" #~ msgid "ignore" #~ msgstr "hunsa" #~ msgid "no" #~ msgstr "nei" #~ msgid "yes" #~ msgstr "Já" #~ msgid "SILO Installation" #~ msgstr "SILO uppsetning" #~ msgid "First sector of boot partition" #~ msgstr "Á fyrsta geira ræsidisksneiðar" #~ msgid "Bootloader installation" #~ msgstr "Uppsetning ræsistjóra" #~ msgid "SILO" #~ msgstr "SILO" #~ msgid "Alcatel speedtouch usb" #~ msgstr "Alcatel speedtouch usb" #~ msgid "Sagem (using pppoa) usb" #~ msgstr "Sagem (notar pppoa) usb" #~ msgid "Harddrake2 version %s" #~ msgstr "Harddrake2 útgáfa %s" #~ msgid "transmitted" #~ msgstr "sendi" #~ msgid "received" #~ msgstr "móttók" #~ msgid "" #~ "You can export using NFS or SMB. Please select which you'd like to use." #~ msgstr "Þú getur miðlað með NFS eða SMB. Veldu hvort þú vilt nota." #~ msgid "" #~ "You can export using NFS or Samba. Please select which you'd like to use." #~ msgstr "Þú getur miðlað með NFS eða Samba. Veldu hvort þú vilt nota." #~ msgid "You must be root to read configuration file. \n" #~ msgstr "Þú verður að vera kerfisstjóri til að lesa stillingaskrá. \n" #~ msgid "Can not open %s!" #~ msgstr "Get ekki opnað %s!" #~ msgid "Xpmac (installation display driver)" #~ msgstr "Xpmac (installation display driver)" #~ msgid "4 billion colors (32 bits)" #~ msgstr "4 miljarðar lita (32 bits)" #~ msgid "XFree86 server: %s\n" #~ msgstr "XFree86 miðlari: %s\n" #~ msgid "Here is the full list of keyboards available" #~ msgstr "Hér er listi af mögulegum lyklaborðsuppsetningum" #~ msgid "Please insert the Boot floppy used in drive %s" #~ msgstr "Settu ræsidiskling í drif %s" #~ msgid "XawTV is not installed!" #~ msgstr "XawTV er ekki sett upp!" #~ msgid "Provider dns 1 (optional)" #~ msgstr "Nafnamiðlari 1 (ekki krafist)" #~ msgid "Provider dns 2 (optional)" #~ msgstr "Nafnamiðlari 2 (ekki krafist)" #~ msgid "DHCP Client" #~ msgstr "DHCP biðlari" #~ msgid "" #~ "Change\n" #~ "Restore Path" #~ msgstr "" #~ "Breyta\n" #~ "Slóð endurheimtu" #~ msgid "European protocol" #~ msgstr "Evrópskan samskiptastaðal" #~ msgid "Found \"%s\" interface do you want to use it ?" #~ msgstr "Fann \"%s\" kort vilu nota það ?" #~ msgid "What kind is your ISDN connection?" #~ msgstr "Hvaða gerðar er ISDN tengingin þín?" #~ msgid "Do you want to start a new configuration ?" #~ msgstr "Viltu prófa stillingarnar?" #~ msgid "" #~ "I have detected an ISDN PCI card, but I do not know its type. Please " #~ "select a PCI card on the next screen." #~ msgstr "" #~ "Ég hef fundið ISDN PCI kort, en ég veit ekki hvaða tegund. Vinsamlega " #~ "veldu tegund á næsta skjá." #~ msgid "No ISDN PCI card found. Please select one on the next screen." #~ msgstr "Ekkert ISDN-PCI kort fannst. Vinsamlega veldu eitt á næsta skjá." #~ msgid "Under Devel ... please wait." #~ msgstr "Í þróun... Bíðið." #~ msgid "Windows (FAT32)" #~ msgstr "Windows (FAT32)" #~ msgid "Scientific Workstation" #~ msgstr "Vísindaleg vinnustöð" #~ msgid "Scientific applications such as gnuplot" #~ msgstr "Vísindaforrit svo sem gnuplot" #~ msgid "Can not create log file!" #~ msgstr "Get ekki búið til annál!" #~ msgid "Configuration of a remote printer" #~ msgstr "Stilla fjartengdan prentara" #~ msgid "Gnome Workstation" #~ msgstr "Gnome vinnustöð" #~ msgid "Running \"%s\" ..." #~ msgstr "Keyri \"%s\"..." #~ msgid "utopia 25" #~ msgstr "utopia 25" #~ msgid "On Hard Drive" #~ msgstr "Á harðan disk" #~ msgid "Messages" #~ msgstr "Skilaboð" #~ msgid "Syslog" #~ msgstr "Kerfisannáll" #~ msgid "Compact" #~ msgstr "Samþjappað"