msgid "" msgstr "" "Content-Type: text/plain; charset=UTF-8\n" # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you won't be able to undo this operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n" "sistema operativo Mandrakelinux. Si su disco rígido está vacío o si un\n" "sistema operativo existente está utilizando todo el espacio disponible,\n" "necesitará particionar el disco. Básicamente, particionar un disco rígido\n" "consiste en dividirlo lógicamente para crear espacio para instalar su\n" "sistema Mandrakelinux nuevo.\n" "\n" "Debido a que el proceso de particionado de un disco rígido por lo general\n" "es irreversible y puede llevar a pérdida de datos, el particionado puede\n" "ser intimidante y estresante si Usted es un usuario inexperto. Por fortuna,\n" "DrakX incluye un asistente que simplifica este proceso. Antes de continuar\n" "con este paso, por favor lea el resto de esta sección y, por sobre todo,\n" "tómese su tiempo.\n" "\n" "Dependiendo de la configuración de su disco rígido, están disponibles\n" "varias opciones:\n" "\n" " * \"%s\". Esta opción simplemente llevará a un particionado automático de\n" "su(s) disco(s) vacío(s). Si elige esta opción, no se le pedirán más\n" "detalles ni se le formularán más preguntas.\n" "\n" " * \"%s\". El asistente ha detectado una o más particiones Linux existentes\n" "en su disco rígido. Si desea utilizarlas, elija esta opción. Entonces se le\n" "pedirá que elija los puntos de montaje asociados a cada una de las\n" "particiones. Los puntos de montaje legados se seleccionan de manera\n" "predeterminada, y por lo general es buena idea mantenerlos.\n" "\n" " * \"%s\". Si Microsoft Windows está instalado en su disco rígido y ocupa\n" "todo el espacio disponible en el mismo, Usted tendrá que liberar espacio\n" "para Linux. Para hacerlo, puede borrar su partición y datos Microsoft\n" "Windows (vea la solución \"Borrar el disco entero\") o cambiar el tamaño de\n" "su partición Microsoft Windows FAT o NTFS. El cambio de tamaño se puede\n" "realizar sin la pérdida de datos, siempre y cuando Usted haya\n" "desfragmentado con anterioridad la partición Windows. Es altamente\n" "recomendable hacer una copia de respaldo de sus datos. Se recomienda usar\n" "esta solución si desea utilizar tanto Mandrakelinux como Microsoft Windows\n" "en la misma computadora.\n" "\n" " Antes de elegir esta opción, por favor comprenda que después de este\n" "procedimiento el tamaño de su partición Microsoft Windows será más pequeño\n" "que cuando comenzó. Tendrá menos espacio bajo Microsoft Windows para\n" "almacenar sus datos o instalar software nuevo.\n" "\n" " * \"%s\". Si desea borrar todos los datos y todas las particiones\n" "presentes en su disco rígido y reemplazarlos con su nuevo sistema\n" "Mandrakelinux, seleccione esta opción. Tenga cuidado con esta solución ya\n" "que no podrá revertir su elección después de confirmarla.\n" "\n" " !! Si elige esta opción, se perderán todos los datos en su disco. !!\n" "\n" " * \"%s\". Esta opción aparece cuando todo el disco está tomado por\n" "Microsoft Windows. Al elegir esta opción simplemente se borrará todo el\n" "disco y se comenzará desde cero, particionando todo de nuevo.\n" "\n" " !! Si elige esta opción, se perderán todos los datos en su disco. !!\n" "\n" " * \"%s\": elija esta opción si desea particionar manualmente su disco\n" "rígido. Tenga cuidado - esta es una elección potente pero peligrosa y puede\n" "perder todos sus datos con facilidad. Esa es la razón por la cual esta\n" "opción realmente sólo se recomienda si ha hecho algo como esto antes y\n" "tiene algo de experiencia. Para más instrucciones acerca de la utilización\n" "del utilitario DiskDrake, consulte la sección \"Administrar sus\n" "particiones\" de la \"Guía de Comienzo\"." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Resolución\n" "\n" " Aquí puede elegir las resoluciones y profundidades de color disponibles\n" "para su hardware de gráficos. Seleccione la que mejor se ajuste a sus\n" "necesidades (podrá hacer cambios luego de la instalación). En la imagen del\n" "monitor se muestra un ejemplo de la configuración elegida." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point won't be authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system won't work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you won't affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and don't care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n" "puede tener sus preferencias propias, sus archivos propios, y así\n" "sucesivamente. Puede leer la \"Guía de Comienzo\" para aprender más. Pero,\n" "a diferencia de \"root\", que es el administrador del sistema, los usuarios\n" "que agregue en este punto no estarán autorizados a cambiar nada excepto su\n" "configuración y sus archivos propios, protegiendo al sistema contra cambios\n" "no intencionales o maliciosos que pueden impactar al sistema como un todo.\n" "Tendrá que crear al menos un usuario no privilegiado para Usted mismo - esa\n" "cuenta es la que debería utilizar para el uso rutinario diario. Aunque es\n" "muy práctico ingresar como \"root\" para hacer cualquier cosa y de todo,\n" "¡también puede ser muy peligroso! Un error podría significar que su sistema\n" "deje de funcionar. Si comete un error serio como usuario no privilegiado,\n" "sólo puede llegar a perder algo de información, pero no afectar a todo el\n" "sistema.\n" "\n" "El primer campo le pide un nombre real. Por supuesto, esto no es\n" "obligatorio - en realidad, puede ingresar lo que desee. DrakX usará la\n" "primer palabra que ingresó y la copiará al campo \"%s\", que es el nombre\n" "que este usuario en particular usará para ingresar al sistema. Si lo desea,\n" "puede omitir lo predeterminado y cambiar el nombre de usuario. El próximo\n" "paso es ingresar una contraseña. La contraseña de un usuario no\n" "privilegiado (regular) no es tan crucial como la de \"root\" desde el punto\n" "de vista de la seguridad, pero esto no es razón alguna para obviarla o\n" "hacerla muy simple: después de todo, son sus archivos los que podrían estar\n" "en peligro.\n" "\n" "Una vez que hace clic sobre \"%s\", puede agregar otros usuarios. Agregue\n" "un usuario para cada uno de sus amigos: por ejemplo su padre o su hermana.\n" "Haga clic sobre \"%s\" cuando haya terminado de agregar todos los usuarios\n" "que desee.\n" "\n" "Hacer clic sobre el botón \"%s\" le permite cambiar el \"shell\"\n" "predeterminado para ese usuario (bash, por defecto)\n" "\n" "Cuando haya finalizado de añadir todos los usuarios se le propone elegir un\n" "usuario para conectarse automáticamente en el sistema cuando arranca la\n" "computadora. Si está interesado en esta característica (y no le importa\n" "mucho la seguridad local), elija el usuario y administrador de ventanas\n" "deseado. Si no está interesado en esta característica, quite la marca de la\n" "casilla \"%s\". Haga clic sobre \"%s\" una vez que seleccionó su\n" "preferencia." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data won't be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" "Este paso se activa sólo si se encontró una partición GNU/Linux existente\n" "en su máquina.\n" "\n" "DrakX ahora necesita saber si desea realizar una instalación nueva o una\n" "actualización de un sistema Mandrakelinux existente:\n" "\n" " * \"%s\". En gran parte, esta opción borrará por completo el sistema\n" "anterior. Sin embargo, dependiendo de su esquema de particiones, puede\n" "evitar que se sobre-escriban algunos datos existentes (notablemente los\n" "directorios de \"home\"). Si desea cambiar la forma en la que se\n" "particionan sus discos, debería usar esta opción.\n" "\n" " * \"%s\": Esta clase de instalación le permite actualizar los paquetes que\n" "en este momento están instalados en su sistema Mandrakelinux. No se alteran\n" "las particiones corrientes de sus discos ni los datos de los usuarios. La\n" "mayoría de los otros pasos de configuración permanecen disponibles y son\n" "similares a una instalación estándar.\n" "\n" "El uso de la opción \"Actualizar\" debería funcionar sin problemas para los\n" "sistemas Mandrakelinux que corren la versión \"8.1\" o una posterior. No se\n" "recomienda realizar una actualización sobre versiones anteriores a\n" "Mandrakelinux versión \"8.1\"." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "Es probable que cuando instale Mandrakelinux algunos paquetes se hayan\n" "actualizado desde la publicación inicial. Se pueden haber corregido errores\n" "y solucionado problemas de seguridad. Para permitir que Usted se beneficie\n" "de estas actualizaciones, ahora las puede descargar desde la Internet.\n" "Marque \"%s\" si tiene funcionando una conexión con la Internet, o \"%s\"\n" "si prefiere instalar los paquetes actualizados más tarde.\n" "\n" "Al elegir \"%s\" se mostrará una lista de lugares desde los que se pueden\n" "obtener las actualizaciones. Debería elegir el más cercano a Usted.\n" "Aparecerá un árbol de selección de paquetes: revise la selección y presione\n" "\"%s\" para obtener e instalar los paquetes seleccionados, o \"%s\" para\n" "abortar." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Se ha detectado más de una partición Microsoft Windows en su disco rígido.\n" "Por favor, elija aquella a la cual desea cambiar el tamaño para poder\n" "instalar su sistema operativo Mandrakelinux nuevo.\n" "\n" "Cada partición se lista como sigue: \"Nombre Linux\", \"Nombre Windows\",\n" "\"Capacidad\".\n" "\n" "\"Nombre Linux\" está estructurado: \"tipo de disco rígido\", \"número de\n" "disco rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n" "\n" "\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n" "el mismo es un disco SCSI.\n" "\n" "\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n" "\"sd\". Para los discos IDE:\n" "\n" " * \"a\" significa \"disco rígido maestro en la controladora IDE\n" "primaria\",\n" "\n" " * \"b\" significa \"disco rígido esclavo en la controladora IDE\n" "primaria\",\n" "\n" " * \"c\" significa \"disco rígido maestro en la controladora IDE\n" "secundaria\",\n" "\n" " * \"d\" significa \"disco rígido esclavo en la controladora IDE\n" "secundaria\".\n" "\n" "Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n" "significa \"segunda SCSI ID menor\", etc.\n" "\n" "\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n" "primer disco o partición se denomina \"C:\")." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "X (por \"X Window System\") es el corazón de la interfaz gráfica de\n" "GNU/Linux en el que se apoyan todos los entornos gráficos (KDE, GNOME,\n" "AfterStep, WindowMaker, etc.) que se incluyen con Mandrakelinux.\n" "\n" "Se le presentará la lista de parámetros diferentes a cambiar para obtener\n" "una presentación gráfica óptima.\n" "\n" "Tarjeta gráfica\n" "\n" " Normalmente el instalador puede detectar y configurar automáticamente la\n" "tarjeta de vídeo instalada en su máquina. Si este no es el caso, en esta\n" "lista puede elegir la tarjeta que realmente tiene instalada.\n" "\n" " En caso de que estén disponibles diferentes servidores para su tarjeta,\n" "con o sin aceleración de 3D, entonces se le va a proponer elegir el\n" "servidor que mejor satisface sus necesidades.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normalmente el instalador puede detectar y configurar automáticamente el\n" "monitor conectado a su máquina. Si es incorrecto, en esta lista puede\n" "elegir el monitor que realmente posee.\n" "\n" "\n" "\n" "Resolución\n" "\n" " Aquí puede elegir las resoluciones y profundidades de color disponibles\n" "para su hardware de gráficos. Seleccione la que mejor se ajuste a sus\n" "necesidades (podrá hacer cambios luego de la instalación). En la imagen del\n" "monitor se muestra un ejemplo de la configuración elegida.\n" "\n" "\n" "\n" "Probar\n" "\n" " Esta entrada puede no aparecer, dependiendo de su hardware.\n" "\n" " El sistema intentará abrir una pantalla gráfica con la resolución\n" "deseada. Si ve el mensaje durante la prueba, y responde \"%s\", entonces\n" "DrakX continuará con el paso siguiente. Si no puede ver el mensaje,\n" "entonces significa que alguna parte de la configuración detectada\n" "automáticamente era incorrecta y la prueba terminará automáticamente luego\n" "de unos segundos, restaurando el menú. Cambie los ajustes hasta obtener una\n" "pantalla gráfica correcta.\n" "\n" "\n" "\n" "Opciones\n" "\n" " Este paso le permite elegir si desea que su máquina cambie\n" "automáticamente a la interfaz gráfica al arrancar. Obviamente, querrá\n" "marcar \"%s\" si su sistema actuará como servidor, o si no tuvo éxito en la\n" "configuración de su pantalla." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you don't have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "Ahora es el momento de seleccionar un sistema de impresión para su\n" "computadora. Otros sistemas operativos pueden ofrecerle uno, pero\n" "Mandrakelinux le ofrece dos. Cada uno de los sistemas de impresión es más\n" "adecuado para tipos de configuración particulares.\n" "\n" " * \"%s\" - \"print, don't queue\" (imprimir sin poner en cola) es la\n" "elección si Usted tiene una conexión directa a su impresora y desea evitar\n" "el pánico de los papeles trabados, y no tiene impresora en red alguna\n" "(\"%s\" manejará sólo casos de red muy simples y es algo lento cuando se\n" "utiliza con las redes) Se recomienda utilizar \"pdq\" si esta es su primer\n" "experiencia con GNU/Linux.\n" "\n" " * \"%s\" - \"Common Unix Printing System\"punta (Sistema de Impresión\n" "Común de Unix) es una elección excelente para imprimir en su impresora\n" "local o en una que se encuentre al otro lado del planeta. Es simple de\n" "configurar y puede actuar como servidor o cliente para el sistema de\n" "impresión antiguo \"lpd\", por lo que es compatible con sistemas operativos\n" "más antiguos que todavía pueden necesitar servicios de impresión. Si bien\n" "es bastante potente, la configuración básica es tan simple como la de\n" "\"pdq\". Si necesita que emule a un servidor \"lpd\", debe activar el\n" "demonio \"cups-lpd\". \"%s\" incluye interfaces gráficas para imprimir o\n" "elegir las opciones de la impresora y para administrar la impresora.\n" "\n" "Si hace una elección ahora y más tarde encuentra que a Usted no le gusta su\n" "sistema de impresión, puede cambiarlo ejecutando PrinterDrake desde el\n" "Centro de Control de Mandrakelinux y haciendo clic sobre el botón \"%s\"." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "Ahora es el momento de especificar los programas que desea instalar en su\n" "sistema. Hay miles de paquetes disponibles para Mandrakelinux, y para hacer\n" "más simple el manejo de los paquetes, los mismos se han puesto en grupos de\n" "aplicaciones similares.\n" "\n" "Mandrakelinux clasifica los grupos de paquetes en cuatro categorías. Puede\n" "mezclar y hacer coincidir aplicaciones de varias categorías, por lo que una\n" "instalación de \"Estación de trabajo\" puede tener instaladas aplicaciones\n" "de la categoría \"Desarrollo\".\n" "\n" " * \"%s\": si planifica utilizar su máquina como una estación de trabajo,\n" "seleccione una o más aplicaciones de la categoría estación de trabajo.\n" "\n" " * \"%s\": si planifica utilizar su máquina para programar, elija los\n" "grupos apropiados de esa categoría. El grupo especial \"LSB\" configurará\n" "su sistema de forma tal que cumpla tanto como sea posible con las\n" "especificaciones Linux Standard Base.\n" "\n" " Si selecciona el grupo \"LSB\" también se instalará la serie del núcleo\n" "\"2.4\", en vez de la serie predeterminada \"2.6\". Esto es para asegurar\n" "una compatibilidad 100%% con LSB del sistema. Sin embargo, si no selecciona\n" "el grupo \"LSB\" todavía obtendrá un sistema que es casi 100%% compatible\n" "con LSB.\n" "\n" " * \"%s\": si pretende usar la máquina como un servidor, seleccione cuáles\n" "de los servicios más comunes desea instalar en su máquina.\n" "\n" " * \"%s\": aquí es donde seleccionará su entorno gráfico preferido. Si\n" "desea tener una estación de trabajo gráfica, debe seleccionar al menos uno.\n" "\n" "Si mueve el cursor del ratón sobre el nombre de un grupo se mostrará un\n" "pequeño texto explicativo acerca de ese grupo.\n" "\n" "Puede marcar la casilla \"%s\" que es útil si está familiarizado con los\n" "paquetes que se ofrecen, o si desea tener un control total sobre lo que se\n" "instalará.\n" "\n" "Si inició la instalación en el modo \"%s\", puede deseleccionar todos los\n" "grupos para evitar la instalación de cualquier paquete nuevo. Esto es útil\n" "para reparar o actualizar un sistema existente.\n" "\n" "Si deselecciona todos los grupos cuando está realizando una instalación\n" "regular (es decir, no una actualización), aparecerá un diálogo que sugiere\n" "opciones diferentes para una instalación mínima:\n" "\n" " * \"%s\": instala la menor cantidad de paquetes posible para tener un\n" "escritorio gráfico que funcione.\n" "\n" " * \"%s\": instala el sistema base más algunos utilitarios básicos y la\n" "documentación de los mismos. Esta instalación es adecuada para configurar\n" "un servidor.\n" "\n" " * \"%s\": instalará el mínimo necesario estricto para obtener un sistema\n" "Linux que funciona. Con esta instalación sólo tendrá una interfaz de línea\n" "de comandos. Esta instalación ocupa alrededor de 65 MB." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "La instalación de Mandrakelinux se distribuye en varios CD-ROM. Si un\n" "paquete seleccionado se encuentra en otro CD-ROM, DrakX expulsará el CD\n" "corriente y le pedirá que inserte el necesario. Si no tiene el CD necesario\n" "a mano, simplemente haga clic sobre \"%s\", no se instalarán los paquetes\n" "correspondientes." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: don't make the password too long or too complicated because you\n" "must be able to remember it!\n" "\n" "The password won't be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you don't know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Este es el punto de decisión más crucial para la seguridad de su sistema\n" "GNU/Linux: tendrá que ingresar la contraseña de \"root\". El usuario\n" "\"root\" es el administrador del sistema y es el único autorizado a hacer\n" "actualizaciones, agregar usuarios, cambiar la configuración general del\n" "sistema, etc. Resumiendo, ¡\"root\" puede hacer de todo! Es por esto que\n" "deberá elegir una contraseña que sea difícil de adivinar - DrakX le dirá si\n" "la que eligió es demasiado fácil. Como puede ver, no es forzoso ingresar\n" "una contraseña, pero le recomendamos encarecidamente que ingrese una.\n" "GNU/Linux es tan propenso a errores del operador como cualquier otro\n" "sistema operativo. Es importante que sea difícil convertirse en \"root\"\n" "debido a que \"root\" puede sobrepasar todas las limitaciones y borrar, sin\n" "intención, todos los datos que se encuentran en las particiones accediendo\n" "a las mismas sin el cuidado suficiente.\n" "\n" "La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n" "menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n" "- por ejemplo, en un papel - eso hace que sea muy fácil comprometer su\n" "sistema.\n" "\n" "Sin embargo, no debería hacer la contraseña muy larga o complicada ¡debido\n" "a que Usted debe poder recordarla!\n" "\n" "La contraseña no se mostrará en la pantalla a medida que Usted la teclee.\n" "Deberá teclear la contraseña dos veces para reducir la posibilidad de un\n" "error de tecleo a ciegas. Si ocurre que Usted comete dos veces el mismo\n" "error de tecleo, tendrá que utilizar esta contraseña \"incorrecta\" la\n" "primera vez que intente conectarse como \"root\".\n" "\n" "Si desea utilizar un servidor de autenticación para controlar el acceso a\n" "su computadora, haga clic sobre el botón \"%s\".\n" "\n" "Si su red usa los protocolos LDAP, NIS, o servicios de autenticación de PDC\n" "Dominio de Windows, seleccione el apropiado como método de autenticación.\n" "Si no sabe cual utilizar, debería preguntar al administrador de su red.\n" "\n" "Si ocurre que tiene problemas para recordar contraseñas, o si su\n" "computadora nunca estará conectada a la Internet y Usted confía\n" "absolutamente en cualquier persona que tenga acceso a la misma, puede\n" "elegir el botón \"%s\"." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Haga clic sobre \"%s\" si desea borrar todos los datos y particiones\n" "presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n" "\"%s\", no podrá recuperar los datos y las particiones presentes en esta\n" "unidad de disco, incluyendo los datos de Windows.\n" "\n" "Haga clic sobre \"%s\" para detener esta operación sin perder los datos ni\n" "las particiones presentes en esta unidad de disco rígido." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you don't know what a particular service is supposed to do or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "Si eligió instalar los paquetes de manera individual, el instalador\n" "presentará un árbol que contiene todos los paquetes clasificados por grupos\n" "y subgrupos. Mientras navega por el árbol puede seleccionar grupos enteros,\n" "subgrupos, o paquetes individuales.\n" "\n" "Tan pronto como selecciona un paquete en el árbol, aparece una descripción\n" "del mismo sobre la derecha que le permite conocer el propósito del paquete.\n" "\n" "Es muy probable que la gran mayoría de las descripciones de los paquetes\n" "estén en inglés.\n" "\n" "!! Si ha sido seleccionado un paquete de servidor, ya sea porque Usted\n" "seleccionó específicamente el paquete individual o porque el mismo era\n" "parte de un grupo de paquetes, se le pedirá que confirme que realmente\n" "desea que se instalen esos servidores. De manera predeterminada,\n" "Mandrakelinux iniciará automáticamente todos los servicios instalados al\n" "momento del arranque. Aunque estos son seguros y no tienen problemas\n" "conocidos al momento en que se publicó la distribución, es muy posible que\n" "se descubran vulnerabilidades en la seguridad luego que se terminó con esta\n" "versión de Mandrakelinux. Si no sabe que es lo que se supone que hace un\n" "servicio o la razón por la cual se está instalando, entonces haga clic\n" "sobre \"%s\". Si hace clic sobre \"%s\" se instalarán todos los servicios\n" "listados y los mismos se iniciarán automáticamente al momento del arranque.\n" "!!\n" "\n" "La opción \"%s\" se usa para deshabilitar el diálogo de advertencia que\n" "aparece cada vez que el instalador selecciona automáticamente un paquete\n" "para resolver un problema de dependencias. Algunos paquetes dependen de\n" "otros y la instalación de un paquete en particular puede requerir la\n" "instalación de otro paquete. El instalador puede determinar qué paquetes se\n" "necesitan para satisfacer una dependencia para poder completar la\n" "instalación de manera satisfactoria.\n" "\n" "El pequeño icono del disquete en la parte inferior de la lista le permite\n" "cargar la lista de paquetes elegida durante una instalación previa. Esto es\n" "útil si Usted tiene una cantidad de máquinas que desea configurar de manera\n" "idéntica. Al hacer clic sobre este icono se le pedirá que inserte un\n" "disquete creado al final de otra instalación. Vea el segundo consejo del\n" "último paso para información sobre como crear dicho disquete." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can't determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" won't install any boot loader. Use this option only if you\n" "know what you're doing." msgstr "" "Un cargador de arranque es un pequeño programa que la computadora inicia al\n" "momento del arranque. Es el responsable de arrancar todo el sistema.\n" "Normalmente la instalación del cargador de arranque está completamente\n" "automatizada. DrakX analizará el sector de arranque del disco y actuará en\n" "función de lo que encuentre allí:\n" "\n" " * Si encuentra un sector de arranque de Windows, lo reemplazará con un\n" "sector de arranque de GRUB/LILO de forma tal que Usted pueda cargar\n" "GNU/Linux o cualquier otro sistema operativo instalado en su máquina.\n" "\n" " * Si encuentra un sector de arranque de GRUB o LILO, lo reemplazará con\n" "uno nuevo.\n" "\n" "Si no puede realizar una determinación, DrakX le preguntará dónde colocar\n" "el cargador de arranque. Generalmente, el \"%s\" es el lugar más seguro. Si\n" "no va a instalar cargador de arranque alguno seleccione \"%s\". Úselo\n" "solamente si sabe lo que está haciendo." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX primero detectará cualquier dispositivo IDE presente en su\n" "computadora. También buscará una o más tarjetas SCSI PCI en su sistema. Si\n" "se encuentra una tarjeta SCSI, DrakX instalará automáticamente el\n" "controlador apropiado.\n" "\n" "Debido a que la detección de hardware no es a prueba de errores, DrakX\n" "puede no detectar sus discos rígidos. De ser así, Usted tendrá que\n" "especificar su hardware manualmente.\n" "\n" "Si tuviese que especificar su adaptador SCSI PCI manualmente, DrakX le\n" "preguntará si desea configurar opciones para el mismo. Debería permitir a\n" "DrakX sondear el hardware en busca de las opciones específicas de la\n" "tarjeta que son necesarias para inicializar el adaptador. La mayoría de las\n" "veces, DrakX saldrá adelante en este paso sin problema alguno.\n" "\n" "Si DrakX no puede sondear las opciones para determinar automáticamente qué\n" "parámetros debe pasar al hardware, Usted deberá configurar manualmente el\n" "controlador." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "El primer paso es elegir el idioma que prefiere.\n" "\n" "Su elección de idioma preferido afectará al idioma del instalador, de la\n" "documentación, y del sistema en general. Seleccione primero la región en la\n" "que se encuentra, y luego el idioma que habla.\n" "\n" "Al hacer clic sobre el botón \"%s\" (Avanzada) podrá seleccionar otros\n" "idiomas para instalar en su sistema, instalando así los archivos\n" "específicos para esos idiomas para la documentación y las aplicaciones. Por\n" "ejemplo, si albergará a gente de Francia en su máquina, seleccione Español\n" "como idioma principal en la vista de árbol y \"%s\" en la sección avanzada.\n" "\n" "Acerca del soporte UTF-8 (Unicode): Unicode es una codificación nueva de\n" "caracteres que pretende cubrir todos los idiomas existentes. Sin embargo,\n" "el soporte completo para Unicode bajo GNU/Linux todavía está en desarrollo.\n" "Por esta razón, Mandrakelinux lo usará o no dependiendo de las elecciones\n" "del usuario:\n" "\n" " * Si elige un idioma con codificación legada fuerte (idiomas latin1, ruso,\n" "japonés, chino, coreano, thai, griego, turco, la mayoría de los idiomas\n" "ISO-8859-2), de manera predeterminada se usará la codificación legada.\n" "\n" " * Otros idiomas utilizarán Unicode de manera predeterminada.\n" "\n" " * Si se necesitan dos o más idiomas, y dichos idiomas no utilizan la misma\n" "codificación, entonces el sistema completo utilizará Unicode.\n" "\n" " * Finalmente, también se puede forzar el uso de Unicode para todo el\n" "sistema a pedido del usuario seleccionando la opción \"%s\" sin importar\n" "qué idiomas han sido seleccionados.\n" "\n" "Note que no está limitado a elegir un único idioma adicional. Puede elegir\n" "varios, o incluso instalarlos a todos marcando la casilla \"%s\".\n" "Seleccionar el soporte para un idioma significa que se instalarán las\n" "traducciones, tipografías, correctores ortográficos, etc. para dicho\n" "idioma.\n" "\n" "Puede ejecutar el comando \"localedrake\" como \"root\" para cambiar el\n" "idioma de todo el sistema de uno a otro. Ejecutar el comando como usuario\n" "no privilegiado sólo cambiará la configuración de idioma para ese usuario\n" "en particular." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card isn't the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n" "mostrará aquí. Si nota que la tarjeta de sonido no es la que está realmente\n" "presente en su sistema, puede hacer clic sobre el botón y elegir un\n" "controlador diferente." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Elija la unidad de disco que desea borrar para instalar su partición\n" "Mandrakelinux nueva. Tenga cuidado, ¡se perderán todos los datos presentes\n" "en dicha unidad de disco y no se podrán recuperar!." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": al hacer clic sobre el botón \"%s\" se abrirá el asistente de\n" "configuración de la impresora. Consulte el capítulo correspondiente de la\n" "\"Guía de Comienzo\" para más información sobre cómo configurar una\n" "impresora nueva. La interfaz presentada allí es similar a la utilizada\n" "durante la instalación." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "Opciones\n" "\n" " Este paso le permite elegir si desea que su máquina cambie\n" "automáticamente a la interfaz gráfica al arrancar. Obviamente, querrá\n" "marcar \"%s\" si su sistema actuará como servidor, o si no tuvo éxito en la\n" "configuración de su pantalla." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Por favor, seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n" "bajo Windows se denomina \"ttyS0\" bajo GNU/Linux." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you don't know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "En este punto, DrakX le permitirá elegir el nivel de seguridad que desea\n" "para su máquina. Como regla general, el nivel de seguridad debería ser\n" "mayor si la máquina va a contener datos cruciales, o si estará expuesta\n" "directamente a la Internet. No obstante, un nivel de seguridad más alto\n" "generalmente se obtiene a expensas de la facilidad de uso.\n" "\n" "Si no sabe cual elegir, mantenga la opción predeterminada. Podrá cambiarla\n" "más adelante con la herramienta draksec, que es parte del Centro de Control\n" "de Mandrakelinux.\n" "\n" "Complete el campo \"%s\" con la dirección de correo electrónico de la\n" "persona responsable de la seguridad. Los mensajes relativos a la seguridad\n" "se enviarán a esa dirección." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "isn't in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card isn't the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it isn't\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that doesn't suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "A manera de revisión, DrakX presentará un resumen de las distintas\n" "informaciones que recopiló acerca de su sistema. Dependiendo del hardware\n" "instalado en su máquina, puede tener algunas o todas las entradas\n" "siguientes. Cada entrada está compuesta del elemento a configurar, seguido\n" "de un pequeño resumen de la configuración actual. Haga clic sobre el botón\n" "\"%s\" correspondiente para hacer los cambios.\n" "\n" " * \"%s\": verifique la configuración de la disposición actual del teclado\n" "y cámbiela si es necesario.\n" "\n" " * \"%s\": verifique la selección actual del país. Si Usted no se encuentra\n" "en este país haga clic sobre el botón \"%s\" y seleccione otro. Si su país\n" "no se muestra en la primer lista que se muestra, haga clic sobre el botón\n" "\"%s\" para obtener la lista completa de países.\n" "\n" " * \"%s\": De manera predeterminada DrakX deduce su huso horario basándose\n" "en el país que ha elegido. Puede hacer clic sobre el botón \"%s\" si esto\n" "no es correcto.\n" "\n" " * \"%s\": verifique la configuración del ratón y haga clic sobre el botón\n" "para cambiarla, si es necesario.\n" "\n" " * \"%s\": al hacer clic sobre el botón \"%s\" se abrirá el asistente de\n" "configuración de la impresora. Consulte el capítulo correspondiente de la\n" "\"Guía de Comienzo\" para más información sobre cómo configurar una\n" "impresora nueva. La interfaz presentada allí es similar a la utilizada\n" "durante la instalación.\n" "\n" " * \"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n" "mostrará aquí. Si nota que la tarjeta de sonido no es la que está realmente\n" "presente en su sistema, puede hacer clic sobre el botón y elegir un\n" "controlador diferente.\n" "\n" " * \"%s\": si se detecta una tarjeta de TV en su sistema, la misma se\n" "muestra aquí. Si tiene una tarjeta de TV y la misma no se detecta, haga\n" "clic sobre \"%s\" para intentar configurarla a mano.\n" "\n" " * \"%s\": Puede hacer clic sobre \"%s\" para cambiar los parámetros\n" "asociados a la tarjeta si cree que no son los correctos.\n" "\n" " * \"%s\": de manera predeterminada DrakX configura su interfaz gráfica en\n" "\"800x600\" o \"1024x768\" de resolución. Si eso no le satisface, haga clic\n" "sobre \"%s\" para cambiar la configuración su interfaz gráfica.\n" "\n" " * \"%s\": si desea configurar ahora el acceso a la Internet o a su red\n" "local, puede hacerlo ahora. Consulte la documentación impresa o utilice el\n" "Centro de Control de Mandrakelinux luego que finalizó la instalación para\n" "aprovechar la ayuda en línea completa.\n" "\n" " * \"%s\": permite configurar las direcciones de los proxy HTTP y FTP si la\n" "máquina sobre la que está instalando estará ubicada detrás de un servidor\n" "proxy.\n" "\n" " * \"%s\": esta entrada le ofrece volver a definir el nivel de seguridad\n" "como se ajustó en un paso previo (ver ).\n" "\n" " * \"%s\": si planifica conectar su máquina a la Internet, es una buena\n" "idea protegerse de las intrusiones configurando un cortafuegos. Consulte la\n" "sección correspondiente de la \"Guía de Comienzo\" para detalles acerca de\n" "los ajustes del cortafuegos.\n" "\n" " * \"%s\": si desea cambiar la configuración de su cargador de arranque,\n" "haga clic sobre este botón. Esto debería estar reservado para los usuarios\n" "avanzados. Consulte la documentación impresa o la ayuda en línea acerca de\n" "la configuración del cargador de arranque en el Centro de Control de\n" "Mandrakelinux.\n" "\n" " * \"%s\": por medio de esta entrada podrá tener un control fino sobre qué\n" "servicios correrán en su máquina. Si planifica utilizar esta máquina como\n" "servidor es una buena idea revisar estos ajustes." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "En caso de que estén disponibles diferentes servidores para su tarjeta, con\n" "o sin aceleración de 3D, entonces se le va a proponer elegir el servidor\n" "que mejor satisface sus necesidades." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "Por lo general, DrakX no tiene problemas en detectar la cantidad de botones\n" "de su ratón. Si no es así, asume que Usted tiene un ratón de dos botones y\n" "lo configurará para que emule el tercero. El tercer botón del ratón en un\n" "ratón de dos botones se puede \"obtener\" haciendo clic simultáneamente\n" "sobre el botón izquierdo y el derecho. DrakX sabrá automáticamente si su\n" "ratón utiliza una interfaz PS/2, serie o USB.\n" "\n" "En caso que tenga un ratón de 3 botones sin rueda, puede elegir un ratón\n" "\"%s\". Entonces, DrakX configurará su ratón de forma tal que pueda simular\n" "la rueda con el mismo: para hacerlo, presione el botón del medio y, sin\n" "soltarlo, mueva el puntero de su ratón arriba y abajo.\n" "\n" "Si, por alguna razón, desea especificar un tipo de ratón diferente,\n" "selecciónelo de la lista que se proporciona.\n" "\n" "Puede seleccionar la entrada \"%s\" para elegir un tipo de ratón\n" "\"genérico\" que funcionará con casi todos los ratones.\n" "\n" "Si elige un ratón distinto al predeterminado, se mostrará una pantalla de\n" "prueba. Use los botones y la rueda para verificar que los ajustes son\n" "correctos y que el ratón está funcionando correctamente. Si el ratón no\n" "está funcionando bien, presione la [barra espaciadora] o la tecla [Intro]\n" "para cancelar la prueba y volverá a la lista de opciones.\n" "\n" "Ocasionalmente, los ratones con rueda no se detectan automáticamente, por\n" "lo que deberá seleccionar su ratón de una lista. Debe asegurarse de\n" "seleccionar el correspondiente al puerto en el cual está conectado su\n" "ratón. Después de seleccionar un ratón y presionar el botón \"%s\", se\n" "mostrará la imagen de un ratón en la pantalla. Mueva la rueda de su ratón\n" "para asegurarse que está activa correctamente. A medida que mueva la rueda,\n" "verá que se mueve la rueda en la pantalla. Pruebe los botones y verifique\n" "que el puntero del ratón se mueve en la pantalla a medida que mueve su\n" "ratón." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Tarjeta gráfica\n" "\n" " Normalmente el instalador puede detectar y configurar automáticamente la\n" "tarjeta de vídeo instalada en su máquina. Si este no es el caso, en esta\n" "lista puede elegir la tarjeta que realmente tiene instalada.\n" "\n" " En caso de que estén disponibles diferentes servidores para su tarjeta,\n" "con o sin aceleración de 3D, entonces se le va a proponer elegir el\n" "servidor que mejor satisface sus necesidades." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Antes de continuar, debería leer cuidadosamente los términos de la\n" "licencia. La misma cubre a toda la distribución Mandrakelinux. Si está de\n" "acuerdo con todos los términos en la misma, haga clic en el botón \"%s\".\n" "Si no, haga clic en el botón \"%s\" lo que reiniciará su computadora." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which aren't needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably don't want to start any services which you don't need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Este diálogo se usa para elegir cuáles servicios Usted desea que se inicien\n" "durante el arranque.\n" "\n" "DrakX listará todos los servicios disponibles en la instalación corriente.\n" "Revíselos con cuidado y quite la marca de aquellos que no son necesarios al\n" "arrancar.\n" "\n" "Cuando se selecciona un servicio obtendrá un pequeño texto explicativo\n" "acerca del mismo. Sin embargo, si no está seguro si un servicio es útil o\n" "no, es más seguro dejar el comportamiento predeterminado.\n" "\n" "!! Tenga mucho cuidado en esta etapa si pretende usar su máquina como un\n" "servidor: probablemente no desea iniciar servicios que no necesita. Por\n" "favor recuerde que algunos servicios pueden ser peligrosos si están\n" "habilitados en un servidor. En general, seleccione sólo aquellos servicios\n" "que realmente necesita. !!" # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Monitor\n" "\n" " Normalmente el instalador puede detectar y configurar automáticamente el\n" "monitor conectado a su máquina. Si es incorrecto, en esta lista puede\n" "elegir el monitor que realmente posee." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" "GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n" "Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n" "horario que Usted seleccionó. Sin embargo, es posible desactivar esto\n" "quitando la marca de la casilla \"%s\", lo que hará que GNU/Linux sepa que\n" "el reloj del sistema y el reloj de hardware están en el mismo huso horario.\n" "Esto es útil cuando la máquina también alberga otro sistema operativo.\n" "\n" "La opción \"%s\" regulará automáticamente el reloj del sistema conectándose\n" "a un servidor remoto de la hora en la Internet. Para que esta\n" "característica funcione, debe tener una conexión con la Internet\n" "funcionando. Le recomendamos que elija un servidor de la hora ubicado cerca\n" "de Usted. En realidad, esta opción instala un servidor de la hora que\n" "también puede ser utilizado por otras máquinas en su red local." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Aquí se listan las particiones Linux existentes que se detectaron en su\n" "disco rígido. Puede mantener las elecciones hechas por el asistente, ya que\n" "las mismas son buenas para las instalaciones más comunes. Si hace cambios,\n" "al menos debe definir una partición raíz (\"/\"). No elija una partición\n" "muy pequeña o no podrá instalar software suficiente. Si desea almacenar sus\n" "datos en una partición separada, también puede necesitar crear una\n" "partición para \"/home\" (sólo es posible si tiene más de una partición\n" "Linux disponible)\n" "\n" "Cada partición se lista como sigue: \"Nombre\", \"Capacidad\".\n" "\n" "\"Nombre\" está estructurado: \"tipo de disco rígido\", \"número de disco\n" "rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n" "\n" "\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n" "el mismo es un disco SCSI.\n" "\n" "\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n" "\"sd\". Para los discos IDE:\n" "\n" " * \"a\" significa \"disco rígido maestro en la controladora IDE\n" "primaria\",\n" "\n" " * \"b\" significa \"disco rígido esclavo en la controladora IDE\n" "primaria\",\n" "\n" " * \"c\" significa \"disco rígido maestro en la controladora IDE\n" "secundaria\",\n" "\n" " * \"d\" significa \"disco rígido esclavo en la controladora IDE\n" "secundaria\".\n" "\n" "Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n" "significa \"segunda SCSI ID menor\", etc." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country isn't in the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" "\"%s\": verifique la selección actual del país. Si Usted no se encuentra en\n" "este país haga clic sobre el botón \"%s\" y seleccione otro. Si su país no\n" "se muestra en la primer lista que se muestra, haga clic sobre el botón\n" "\"%s\" para obtener la lista completa de países." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you don't have to reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "won't be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "Si desea volver a utilizar algunas particiones GNU/Linux legadas, puede\n" "desear volver a formatear algunas de ellas y borrar cualquier dato que\n" "pudieran contener. Para hacerlo, por favor seleccione también dichas\n" "particiones.\n" "\n" "Por favor note que no es necesario volver a formatear todas las particiones\n" "preexistentes. Debe volver a formatear las particiones que contienen el\n" "sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n" "volver a formatear particiones que contienen datos que desea preservar\n" "(típicamente \"/home\")\n" "\n" "Por favor, tenga sumo cuidado cuando selecciona las particiones. Después de\n" "formatear se borrarán todos los datos en las particiones seleccionadas y no\n" "podrá recuperarlos en absoluto.\n" "\n" "Haga clic sobre \"%s\" cuando esté listo para formatear las particiones.\n" "\n" "Haga clic sobre \"%s\" si desea elegir otra partición para la instalación\n" "de su sistema operativo Mandrakelinux nuevo.\n" "\n" "Haga clic sobre \"%s\" si desea seleccionar las particiones del disco en\n" "las que se buscarán bloques defectuosos." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard don't match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Dependiendo del idioma que eligió (ver ), DrakX seleccionará\n" "automáticamente un tipo particular de configuración del teclado. Verifique\n" "que la selección le satisface o elija otra distribución de teclado.\n" "\n" "También, puede ser que Usted no tenga un teclado que se corresponde\n" "exactamente con su idioma: por ejemplo, si Usted es un argentino que habla\n" "inglés, puede ser que tenga un teclado latino americano. O si habla\n" "castellano pero está en Inglaterra puede estar en la misma situación en la\n" "cual su idioma nativo y su teclado no coinciden. En cualquier caso, este\n" "paso de instalación le permitirá elegir un teclado apropiado de una lista.\n" "\n" "Haga clic sobre el botón \"%s\" para que se le presente la lista completa\n" "de los teclados soportados.\n" "\n" "Si eligió una distribución de teclado basada en un alfabeto no latino, el\n" "próximo diálogo le permitirá elegir la combinación de teclas que cambiará\n" "la distribución del teclado entre la latina y la no latina." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Don't forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "Ya está. Ahora la instalación está completa y su sistema GNU/Linux está\n" "listo para ser utilizado. Simplemente haga clic sobre \"%s\" para volver a\n" "arrancar el sistema. Lo primero que debería ver tan pronto como su máquina\n" "haya finalizado sus pruebas de hardware, es el menú del cargador de\n" "arranque dándole la opción de elegir que sistema operativo arrancar.\n" "\n" "El botón \"%s\" le muestra dos botones más:\n" "\n" " * \"%s\": le permite crear un disquete de instalación que realizará una\n" "instalación completa automáticamente, sin la asistencia de un operador,\n" "similar a la instalación que ha configurado recién.\n" "\n" " Note que hay dos opciones diferentes disponibles después de hacer clic\n" "sobre ese botón:\n" "\n" " * \"%s\". Esta es una instalación parcialmente automatizada. La etapa\n" "de particionado es el único procedimiento interactivo.\n" "\n" " * \"%s\". Instalación completamente automatizada: el disco rígido se\n" "sobreescribe por completo, y se pierden todos los datos.\n" "\n" " Esta característica es muy útil cuando se instala una cantidad grande de\n" "máquinas similares. Consulte la sección Auto install (en inglés) en nuestro\n" "sitio web para más información.\n" "\n" " * \"%s\"(*): guarda una lista de los paquetes seleccionados en esta\n" "instalación. Para usar esta selección con otra instalación, inserte el\n" "disquete en la disquetera y comience la instalación. En el prompt, presione\n" "la tecla [F1], y a continuación ingrese >>linux defcfg=\"floppy\"<< y\n" "presione la tecla [Intro].\n" "\n" "(*) Necesita un disquete formateado con FAT. Para crear uno bajo GNU/Linux\n" "teclee \"mformat a:\", o \"fdformat /dev/fd0\" seguido de \"mkfs.vfat\n" "/dev/fd0\"." # DO NOT BOTHER TO MODIFY HERE, SEE: # cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Ahora necesita elegir qué particiones se utilizarán para la instalación de\n" "su sistema Mandrakelinux. Si ya se han definido particiones, ya sea por una\n" "instalación previa de GNU/Linux o con otra herramienta de particionado,\n" "puede utilizarlas. De lo contrario, se deben definir particiones en el\n" "disco rígido.\n" "\n" "Para crear particiones, primero debe seleccionar un disco rígido. Puede\n" "seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n" "primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n" "SCSI y así sucesivamente.\n" "\n" "Para particionar el disco rígido seleccionado, puede utilizar estas\n" "opciones:\n" "\n" " * \"%s\": esta opción borra todas las particiones sobre el disco\n" "seleccionado.\n" "\n" " * \"%s\": esta opción le permite crear particiones ext3 y swap\n" "automáticamente en el espacio libre de su disco rígido.\n" "\n" "\"%s\": le da acceso a características adicionales:\n" "\n" " * \"%s\": guarda la tabla de particiones en un disquete. Útil para\n" "recuperar la tabla de particiones más adelante en caso que sea necesario.\n" "Es altamente recomendable realizar este paso.\n" "\n" " * \"%s\": esta opción le permitirá restaurar una tabla de particiones\n" "guardada previamente en un disquete.\n" "\n" " * \"%s\": si su tabla de particiones está dañada puede intentar\n" "recuperarla utilizando esta opción. Por favor, tenga cuidado y recuerde que\n" "puede fallar.\n" "\n" " * \"%s\": descarta todos los cambios y carga la tabla de particiones que\n" "estaba originalmente en el disco rígido.\n" "\n" " * \"%s\": si desmarca esta opción los usuarios estarán forzados a montar y\n" "desmontar manualmente los soportes removibles como los disquetes y los\n" "CD-ROM.\n" "\n" " * \"%s\": use esta opción si desea utilizar un asistente para particionar\n" "su disco rígido. Se recomienda esto si no tiene un buen conocimiento del\n" "particionado.\n" "\n" " * \"%s\": use esta opción para deshacer sus cambios.\n" "\n" " * \"%s\": permite realizar acciones adicionales sobre las particiones\n" "(tipo, opciones, formatear) y brinda más información acerca del disco\n" "rígido.\n" "\n" " * \"%s\": cuando ha terminado de particionar su disco rígido, esto\n" "guardará sus cambios en el disco.\n" "\n" "Cuando se define el tamaño de una partición, puede realizar un ajuste fino\n" "del tamaño utilizando las teclas de las flechas de su teclado.\n" "\n" "Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n" "través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n" "\n" "Cuando se selecciona una partición, puede utilizar:\n" "\n" " * [Ctrl] [C] para crear una partición nueva (cuando está seleccionada una\n" "partición vacía);\n" "\n" " * [Ctrl] [D] para borrar una partición;\n" "\n" " * [Ctrl] [M] para configurar el punto de montaje.\n" "\n" "Para obtener información sobre los distintos tipos de sistemas de archivos\n" "disponibles, por favor lea el capítulo acerca de ext2FS del \"Manual de\n" "Referencia\".\n" "\n" "Si está instalando en una máquina PPC, querrá crear una pequeña partición\n" "HFS de \"bootstrap\" de al menos 1 MB que será utilizada por el cargador de\n" "arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n" "50 MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n" "alternativos para arrancar en situaciones de emergencia."