# translation of DrakX-gl.po to Galician # Jesús Bravo Álvarez (mdk) , 2001 # Leandro Regueiro , 2004 # # msgid "" msgstr "" "Project-Id-Version: DrakX-gl\n" "POT-Creation-Date: 2005-04-21 14:27+0200\n" "PO-Revision-Date: 2005-04-01 15:27+0100\n" "Last-Translator: Leandro Regueiro \n" "Language-Team: Galician \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.1\n" "X-Poedit-Language: Gallegan\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "Que memoria USB desexa formatar?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "Está a piques de formatar un dispositivo USB \"%s\". Isto eliminará tódolos " "datos que hai nel.\n" "Asegúrese de que o dispositivo seleccionado é a memoria USB que quere " "formatar. \n" "Aconsellámoslle que desenchufe tódolos outros dispositivos de almacenamento " "USB mentres fai esta operación." #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "Non se pode escribir na memoria" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "Semella ser que a memoria USB ten activada a protección de escritura.\n" "Desenchúfea, desactive a protección de escritura, e volva enchufala." #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Reintentar" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "Continuar sen a memoria USB" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "Semella ser que a memoria USB ten activada a protección de escritura, pero\n" "non se pode desenchufar de maneira segura.\n" "\n" "\n" "Clique no botón para reiniciar a máquina, desenchúfea, desactive a " "protección\n" "de escritura, enchufe a memoria outra vez, e execute Mandrake Move outra vez." #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320 #, c-format msgid "Reboot" msgstr "Reiniciar" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "A súa memoria USB non ten ningunha partición Windows (FAT)\n" "válida. Cómpre unha para continuar (ademais, é máis estándar así\n" "que poderá mover e acceder ós seus ficheiros dende máquinas\n" "que executen Windows). Enchufe unha memoria USB que\n" "conteña unha partición Windows.\n" "\n" "\n" "Tamén pode continuar sen unha memoria USB - ainda\n" "poderá usar Mandrake Move coma un Sistema Operativo\n" "Mandrake live normal." #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "Cómpre unha memoria para gardar os seus datos" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "Detectar a memoria USB outra vez" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "Configurando memoria USB" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "" "Agarde, configurando os ficheiros de configuración do sistema na memoria " "USB..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "Auto configuración" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Por favor agarde. detectando e configurando os dispositivos..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 #: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401 #: diskdrake/interactive.pm:419 diskdrake/interactive.pm:555 #: diskdrake/interactive.pm:560 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182 #: install_any.pm:1699 install_any.pm:1722 install_steps.pm:82 #: install_steps_interactive.pm:38 interactive/http.pm:117 #: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 #: network/netconnect.pm:1001 network/netconnect.pm:1131 #: network/netconnect.pm:1135 network/netconnect.pm:1139 #: network/netconnect.pm:1144 network/netconnect.pm:1273 #: network/netconnect.pm:1277 network/netconnect.pm:1339 #: network/netconnect.pm:1344 network/netconnect.pm:1364 #: network/netconnect.pm:1575 printer/printerdrake.pm:244 #: printer/printerdrake.pm:251 printer/printerdrake.pm:276 #: printer/printerdrake.pm:422 printer/printerdrake.pm:427 #: printer/printerdrake.pm:440 printer/printerdrake.pm:450 #: printer/printerdrake.pm:514 printer/printerdrake.pm:641 #: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399 #: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481 #: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499 #: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672 #: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680 #: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787 #: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805 #: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924 #: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042 #: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069 #: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089 #: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247 #: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042 #: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596 #: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604 #: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309 #: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592 #: standalone/drakTermServ:392 standalone/drakTermServ:746 #: standalone/drakTermServ:753 standalone/drakTermServ:772 #: standalone/drakTermServ:991 standalone/drakTermServ:1467 #: standalone/drakTermServ:1472 standalone/drakTermServ:1479 #: standalone/drakTermServ:1491 standalone/drakTermServ:1512 #: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1126 standalone/drakbackup:1159 #: standalone/drakbackup:1674 standalone/drakbackup:1830 #: standalone/drakbackup:2429 standalone/drakbackup:4117 #: standalone/drakbackup:4337 standalone/drakclock:124 #: standalone/drakconnect:683 standalone/drakconnect:687 #: standalone/drakconnect:692 standalone/drakconnect:707 #: standalone/drakfloppy:297 standalone/drakfloppy:300 #: standalone/drakfloppy:306 standalone/drakfont:209 standalone/drakfont:222 #: standalone/drakfont:260 standalone/draksplash:21 standalone/draksplash:507 #: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121 #, c-format msgid "Error" msgstr "Erro" #: ../move/move.pm:605 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Ocorreu un erro, e o programa non sabe como manexalo de\n" "maneira limpa. Continúe baixo a súa propia responsabilidade." #: ../move/move.pm:660 install_steps_interactive.pm:38 #, c-format msgid "An error occurred" msgstr "Ocorreu un erro" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "Eliminando os ficheiros de configuración do sistema" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "Só reiniciar" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "Só pode traballar sen soporte para CDROM" #: ../move/tree/mdk_totem:71 #, fuzzy, c-format msgid "Kill those programs" msgstr "Programa de debuxo" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "Sen soporte para CDROM" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 #: diskdrake/interactive.pm:1038 diskdrake/interactive.pm:1048 #: diskdrake/interactive.pm:1101 #, c-format msgid "Read carefully!" msgstr "¡Lea con moita atención!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "Non pode usar outro CDROM cando se estean executando os seguintes " "programas: \n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "Copiando á memoria para permitir a extracción do CDROM" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 KB" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 KB" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB ou máis" #: Xconfig/card.pm:159 #, c-format msgid "X server" msgstr "Servidor X" #: Xconfig/card.pm:160 #, c-format msgid "Choose an X server" msgstr "Elixa un servidor X" #: Xconfig/card.pm:192 #, fuzzy, c-format msgid "Multi-head configuration" msgstr "lendo a configuración" #: Xconfig/card.pm:193 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: Xconfig/card.pm:262 #, c-format msgid "Can not install Xorg package: %s" msgstr "Non se puido instala-lo paquete Xorg: %s" #: Xconfig/card.pm:272 #, c-format msgid "Select the memory size of your graphics card" msgstr "Seleccione a cantidade de memoria da súa tarxeta gráfica" #: Xconfig/card.pm:349 #, c-format msgid "Xorg configuration" msgstr "Configuración de Xorg" #: Xconfig/card.pm:351 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "¿Que configuración de Xorg quere usar?" #: Xconfig/card.pm:384 #, c-format msgid "Configure all heads independently" msgstr "" #: Xconfig/card.pm:385 #, fuzzy, c-format msgid "Use Xinerama extension" msgstr "Usar detección automática" #: Xconfig/card.pm:390 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Configurar só a tarxeta \"%s\"%s" #: Xconfig/card.pm:402 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:409 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s con aceleración 3D por hardware" #: Xconfig/card.pm:411 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "" "A súa tarxeta pode ter soporte de aceleración 3D por hardware con Xorg %s." #: Xconfig/card.pm:417 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s con aceleración 3D por hardware EXPERIMENTAL" #: Xconfig/card.pm:419 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n" "Xorg %s, TEÑA EN CONTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O " "SISTEMA." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921 #, c-format msgid "Custom" msgstr "Personalizado" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 printer/printerdrake.pm:744 #: printer/printerdrake.pm:4401 printer/printerdrake.pm:4853 #: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:229 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Saír" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "Tarxeta Gráfica" #: Xconfig/main.pm:120 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "Monitor" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288 #, c-format msgid "Resolution" msgstr "Resolución" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "Proba" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakfont:491 standalone/drakfont:553 #, c-format msgid "Options" msgstr "Opcións" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "O seu ficheiro de configuración de Xorg está corrompido, ignorarase." #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "¿Manter os cambios?\n" "A configuración actual é:\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, fuzzy, c-format msgid "Choose a monitor for head #%d" msgstr "Escolla un monitor" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "Escolla un monitor" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "Xenérico" #: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53 #: standalone/harddrake2:87 #, c-format msgid "Vendor" msgstr "Vendedor" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Os dous parámetros críticos son a taxa de actualización vertical, que\n" "indica a frecuencia ca que se actualiza a pantalla completa, e máis\n" "importante aínda é a taxa de sincronismo horizontal, que é a\n" "frecuencia ca que se mostran as liñas de barrido horizontal.\n" "\n" "É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n" "de frecuencias de sincronismo superior á capacidade real do seu monitor,\n" "xa que pode danalo.\n" "No caso de dúbida, escolla unha configuración conservadora." #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "Frecuencia de actualización horizontal" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "Frecuencia de actualización vertical" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 cores (8 bits)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 mil cores (15 bits)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 mil cores (16 bits)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 millóns de cores (24 bits)" #: Xconfig/resolution_and_depth.pm:129 #, c-format msgid "Resolutions" msgstr "Resolucións" #: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339 #: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1612 standalone/drakperm:251 #, c-format msgid "Other" msgstr "Outros" #: Xconfig/resolution_and_depth.pm:359 #, c-format msgid "Choose the resolution and the color depth" msgstr "Escolla a resolución e a profundidade de cor" #: Xconfig/resolution_and_depth.pm:360 #, c-format msgid "Graphics card: %s" msgstr "Tarxeta gráfica: %s" #: Xconfig/resolution_and_depth.pm:374 interactive.pm:433 #: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:319 interactive/newt.pm:421 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:199 standalone/drakTermServ:490 #: standalone/drakbackup:1376 standalone/drakbackup:3974 #: standalone/drakbackup:4034 standalone/drakbackup:4078 #: standalone/drakconnect:166 standalone/drakconnect:885 #: standalone/drakconnect:972 standalone/drakconnect:1071 #: standalone/drakfont:574 standalone/drakfont:586 standalone/drakperm:310 #: standalone/drakroam:387 standalone/draksplash:167 standalone/drakups:212 #: standalone/net_monitor:345 ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:909 #: ugtk2.pm:932 #, c-format msgid "Ok" msgstr "Aceptar" #: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89 #: help.pm:444 install_steps_gtk.pm:484 install_steps_interactive.pm:422 #: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/newt.pm:425 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3676 #: standalone/drakautoinst:217 standalone/drakbackup:1376 #: standalone/drakbackup:3900 standalone/drakbackup:3904 #: standalone/drakbackup:3962 standalone/drakconnect:165 #: standalone/drakconnect:970 standalone/drakconnect:1070 #: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741 #: standalone/drakperm:310 standalone/draksplash:167 standalone/drakups:219 #: standalone/logdrake:174 standalone/net_monitor:344 ugtk2.pm:403 #: ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:909 #, c-format msgid "Cancel" msgstr "Cancelar" #: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153 #: install_steps_gtk.pm:232 install_steps_gtk.pm:633 interactive.pm:528 #: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:284 #: standalone/drakbackup:3896 standalone/drakbug:104 #: standalone/drakconnect:161 standalone/drakconnect:246 #: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 #: ugtk2.pm:1041 ugtk2.pm:1042 #, c-format msgid "Help" msgstr "Axuda" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Proba da configuración" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "¿Desexa proba-la configuración?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Advertencia: probar esta tarxeta gráfica pode colgar o ordenador" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Ocorreu un erro:\n" "%s\n" "Inténteo trocando algún parámetro" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "Saíndo en %d segundos" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "É isto correcto?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Disposición do teclado: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Tipo de rato: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Dispositivo do rato: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Frecuencia horizontal do monitor: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Frecuencia vertical do monitor: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Tarxeta gráfica: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Memoria da tarxeta gráfica: %s KB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Profundidade de cor: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Resolución: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Controlador de Xorg: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Lanzar a interface gráfica ó arrincar" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Pódese configurar o seu ordenador para que entre automaticamente\n" "en a interface gráfica ó arrincar.\n" "¿Desexa que se execute X ó reiniciar?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Semella ser que a súa tarxeta gráfica ten un conector TV-OUT.\n" "Pode configurarse para traballar usando frame-buffer.\n" "\n" "Para isto ten que conectar a súa tarxeta gráfica á súa TV antes de arrincar " "o ordenador.\n" "Despois escolla a entrada \"TVout\" no cargador de arrinque\n" "\n" "Ten esta funcionalidade?" #: Xconfig/various.pm:99 #, fuzzy, c-format msgid "What norm is your TV using?" msgstr "¿Que tipo de conexión RDSI ten?" #: Xconfig/xfree.pm:627 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" #: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481 #: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:236 #: standalone/service_harddrake:204 #, c-format msgid "Please wait" msgstr "Por favor, agarde" #: any.pm:143 #, c-format msgid "Bootloader installation in progress" msgstr "Instalando o cargador de arrinque" #: any.pm:154 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" #: any.pm:165 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "A instalación do cargador de arrinque fallou. Ocorreu o seguinte erro:" #: any.pm:171 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: any.pm:209 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Decidiu instala-lo cargador de arrinque nunha partición.\n" "Isto implica que xa ten un cargador de arrinque no disco duro que está " "arrincando (p.ex.: System Commander).\n" "\n" "¿Dende qué unidade está arrincando?" #: any.pm:232 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Primeiro sector do disco (MBR)" #: any.pm:233 #, c-format msgid "First sector of the root partition" msgstr "Primeiro sector da partición raiz" #: any.pm:235 #, c-format msgid "On Floppy" msgstr "Nun Disquete" #: any.pm:237 help.pm:739 printer/printerdrake.pm:4061 #, c-format msgid "Skip" msgstr "Omitir" #: any.pm:241 #, c-format msgid "LILO/grub Installation" msgstr "Instalación do LILO/grub" #: any.pm:242 #, c-format msgid "Where do you want to install the bootloader?" msgstr "¿Onde quere instala-lo cargador de arrinque?" #: any.pm:268 standalone/drakboot:307 #, c-format msgid "Boot Style Configuration" msgstr "Configuración do Estilo de Arrinque" #: any.pm:270 any.pm:302 #, c-format msgid "Bootloader main options" msgstr "Opcións principais do cargador de arrinque" #: any.pm:274 #, c-format msgid "Give the ram size in MB" msgstr "Indique o tamaño da memoria RAM en MB" #: any.pm:276 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "A opción ``Restrinxir opcións da liña de comandos'' non ten sentido sen " "contrasinal" #: any.pm:277 any.pm:610 authentication.pm:182 #, c-format msgid "The passwords do not match" msgstr "Os contrasinais non coinciden" #: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1291 #, c-format msgid "Please try again" msgstr "Por favor, inténteo de novo" #: any.pm:282 any.pm:305 #, c-format msgid "Bootloader to use" msgstr "Cargador de arrinque que se usará" #: any.pm:284 any.pm:307 #, c-format msgid "Boot device" msgstr "Dispositivo de arrinque" #: any.pm:286 #, c-format msgid "Delay before booting default image" msgstr "Retardo antes de arrinca-la imaxe por omisión" #: any.pm:287 #, c-format msgid "Enable ACPI" msgstr "Activar ACPI" #: any.pm:289 #, c-format msgid "Force no APIC" msgstr "" #: any.pm:291 #, c-format msgid "Force No Local APIC" msgstr "" #: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:680 printer/printerdrake.pm:1663 #: printer/printerdrake.pm:1784 standalone/drakbackup:1656 #: standalone/drakbackup:3503 standalone/drakups:299 #, c-format msgid "Password" msgstr "Contrasinal" #: any.pm:294 any.pm:638 authentication.pm:188 #, c-format msgid "Password (again)" msgstr "Contrasinal (de novo)" #: any.pm:295 #, c-format msgid "Restrict command line options" msgstr "Restrinxir opcións da liña de comandos" #: any.pm:295 #, c-format msgid "restrict" msgstr "restrinxir" #: any.pm:297 #, c-format msgid "Clean /tmp at each boot" msgstr "Baleirar /tmp en cada arrinque" #: any.pm:298 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Tamaño exacto da memoria RAM se for necesario (atopáronse %d MB)" #: any.pm:306 #, c-format msgid "Init Message" msgstr "Mensaxe Inicial" #: any.pm:308 #, c-format msgid "Open Firmware Delay" msgstr "" #: any.pm:309 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: any.pm:310 #, c-format msgid "Enable CD Boot?" msgstr "¿Permiti-lo arrinque dende un CD?" #: any.pm:311 #, c-format msgid "Enable OF Boot?" msgstr "" #: any.pm:312 #, c-format msgid "Default OS?" msgstr "¿S.O. por omisión?" #: any.pm:365 #, c-format msgid "Image" msgstr "Imaxe" #: any.pm:366 any.pm:376 #, c-format msgid "Root" msgstr "Raíz" #: any.pm:367 any.pm:389 #, c-format msgid "Append" msgstr "Agregar" #: any.pm:369 standalone/drakboot:309 standalone/drakboot:313 #, c-format msgid "Video mode" msgstr "Modo de video" #: any.pm:371 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:372 #, c-format msgid "Network profile" msgstr "Perfil de rede" #: any.pm:381 any.pm:386 any.pm:388 #, c-format msgid "Label" msgstr "Etiqueta" #: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84 #: standalone/drakfloppy:90 standalone/draksec:52 #, c-format msgid "Default" msgstr "Por omisión" #: any.pm:390 #, c-format msgid "Initrd-size" msgstr "" #: any.pm:392 #, c-format msgid "NoVideo" msgstr "" #: any.pm:403 #, c-format msgid "Empty label not allowed" msgstr "Etiqueta baleira non permitida" #: any.pm:404 #, c-format msgid "You must specify a kernel image" msgstr "Debe especificar unha imaxe do kernel" #: any.pm:404 #, c-format msgid "You must specify a root partition" msgstr "Debe especificar unha partición raíz" #: any.pm:405 #, c-format msgid "This label is already used" msgstr "Esta etiqueta xa se está usando" #: any.pm:419 #, c-format msgid "Which type of entry do you want to add?" msgstr "¿Qué tipo de entrada desexa engadir?" #: any.pm:420 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:420 #, c-format msgid "Other OS (SunOS...)" msgstr "Outros S.O. (SunOS...)" #: any.pm:421 #, c-format msgid "Other OS (MacOS...)" msgstr "Outros S.O. (MacOS...)" #: any.pm:421 #, c-format msgid "Other OS (Windows...)" msgstr "Outros S.O. (Windows...)" #: any.pm:449 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Estas son as diferentes entradas.\n" "Pode engadir algunhas máis ou cambia-las que xa existen." #: any.pm:596 #, c-format msgid "access to X programs" msgstr "acceso ós programas X" #: any.pm:597 #, c-format msgid "access to rpm tools" msgstr "acceso ás ferramentas rpm" #: any.pm:598 #, c-format msgid "allow \"su\"" msgstr "permitir \"su\"" #: any.pm:599 #, c-format msgid "access to administrative files" msgstr "acceso ós ficheiros de administración" #: any.pm:600 #, c-format msgid "access to network tools" msgstr "acceso ás ferramentas de rede" #: any.pm:601 #, c-format msgid "access to compilation tools" msgstr "acceso ás ferramentas de compilación" #: any.pm:606 #, c-format msgid "(already added %s)" msgstr "(%s xa foi engadido)" #: any.pm:611 #, c-format msgid "This password is too simple" msgstr "Este contrasinal é demasiado simple" #: any.pm:612 #, c-format msgid "Please give a user name" msgstr "Por favor, indique un nome de usuario" #: any.pm:613 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "O nome de usuario (login) só pode conter letras minúsculas, números, '-' e " "'_'" #: any.pm:614 #, c-format msgid "The user name is too long" msgstr "O nome de usuario é moi longo" #: any.pm:615 #, c-format msgid "This user name has already been added" msgstr "Este nome de usuario xa está engadido" #: any.pm:619 #, c-format msgid "Add user" msgstr "Engadir usuario" #: any.pm:620 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Introduza un usuario\n" "%s" #: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:4853 #: standalone/drakbackup:2716 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Feito" #: any.pm:624 help.pm:51 #, c-format msgid "Accept user" msgstr "Aceptar usuario" #: any.pm:635 #, c-format msgid "Real name" msgstr "Nome real" #: any.pm:636 standalone/drakbackup:1651 #, c-format msgid "Login name" msgstr "Nome de usuario" #: any.pm:639 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:641 #, c-format msgid "Icon" msgstr "Icona" #: any.pm:688 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Login automático" #: any.pm:689 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Pódese configurar o ordenador para que entre automáticamente\n" "un usuario determinado." #: any.pm:690 help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Desexa usar esta funcionalidade?" #: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887 #: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743 #: standalone/drakbackup:2516 standalone/drakgw:287 standalone/drakgw:288 #: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 #: standalone/harddrake2:310 standalone/net_applet:309 ugtk2.pm:908 #: wizards.pm:156 wizards2.pm:158 #, c-format msgid "Yes" msgstr "Si" #: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444 #: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71 #: standalone/drakbackup:2516 standalone/draksec:54 standalone/harddrake2:311 #: standalone/net_applet:305 ugtk2.pm:908 wizards.pm:156 wizards2.pm:158 #, c-format msgid "No" msgstr "Non" #: any.pm:692 #, c-format msgid "Choose the default user:" msgstr "Escolla o usuario por defecto:" #: any.pm:693 #, c-format msgid "Choose the window manager to run:" msgstr "Escolla o xestor de fiestras que se executará:" #: any.pm:706 #, c-format msgid "Please choose a language to use." msgstr "Por favor, escolla a lingua que desexe usar." #: any.pm:707 #, c-format msgid "Language choice" msgstr "Selección da Lingua" #: any.pm:733 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrakelinux pode soportar múltiples linguas. Seleccione\n" "as linguas que desexa instalar. Esta linguas estarán dispoñibles\n" "cando a instalación estea completa e reinicie o seu sistema." #: any.pm:752 any.pm:773 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Usar Unicode por omisión" #: any.pm:753 help.pm:647 #, c-format msgid "All languages" msgstr "Tódalas linguas" #: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947 #, c-format msgid "Country / Region" msgstr "País" #: any.pm:795 #, c-format msgid "Please choose your country." msgstr "Por favor, escolla o seu país." #: any.pm:797 #, c-format msgid "Here is the full list of available countries" msgstr "Esta é a lista completa dos paises dispoñibles" #: any.pm:798 #, c-format msgid "Other Countries" msgstr "Outros Paises" #: any.pm:806 #, c-format msgid "Input method:" msgstr "Método de entrada:" #: any.pm:807 install_any.pm:422 network/netconnect.pm:181 #: network/netconnect.pm:372 network/netconnect.pm:377 #: network/netconnect.pm:1330 printer/printerdrake.pm:105 #: printer/printerdrake.pm:2199 #, c-format msgid "None" msgstr "Ningún" #: any.pm:921 #, c-format msgid "No sharing" msgstr "Non compartir" #: any.pm:921 #, c-format msgid "Allow all users" msgstr "Permitirlle a tódolos usuarios" #: any.pm:925 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: any.pm:937 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: o sistema tradicional de compartimento de ficheiros de Unix, con menos " "soporte en Mac e Windows." #: any.pm:940 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: un sistema de compartimento de ficheiros que se usa en sistemas " "Windows, Mac OS X e varios Linux modernos." #: any.pm:948 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "Pode exportar usando NFS ou SMB. Por favor, escolla cal quere usar." #: any.pm:973 #, c-format msgid "Launch userdrake" msgstr "Executar userdrake" #: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903 #: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905 #: printer/printerdrake.pm:5162 standalone/drakTermServ:294 #: standalone/drakbackup:4096 standalone/drakbug:126 standalone/drakfont:497 #: standalone/drakroam:234 standalone/net_monitor:123 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "Pechar" #: any.pm:975 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "O compartimento por usuario usa o grupo \"fileshare\". \n" "Pode usar userdrake para engadir un usuario a este grupo." #: authentication.pm:24 #, c-format msgid "Local file" msgstr "Ficheiro local" #: authentication.pm:25 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:26 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:27 #, c-format msgid "Smart Card" msgstr "Tarxeta Smart" #: authentication.pm:28 authentication.pm:153 #, c-format msgid "Windows Domain" msgstr "Dominio Windows" #: authentication.pm:29 #, c-format msgid "Active Directory with SFU" msgstr "Directorio Activo con SFU" #: authentication.pm:30 #, c-format msgid "Active Directory with Winbind" msgstr "Directorio Activo con Winbind" #: authentication.pm:56 #, c-format msgid "Local file:" msgstr "Ficheiro local:" #: authentication.pm:56 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" #: authentication.pm:57 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:57 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" #: authentication.pm:58 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:58 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" #: authentication.pm:59 #, c-format msgid "Windows Domain:" msgstr "Dominio Windows:" #: authentication.pm:59 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "Winbind permítelle ó sistema recuperar información e autenticar os usuarios " "nun dominio Windows." #: authentication.pm:60 #, c-format msgid "Active Directory with SFU:" msgstr "Directorio Activo con SFU:" #: authentication.pm:60 authentication.pm:61 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "" "Kerberos é un sistema seguro que proporciona servicios de autenticación por " "rede." #: authentication.pm:61 #, c-format msgid "Active Directory with Winbind:" msgstr "Directorio Activo con Winbind:" #: authentication.pm:86 #, c-format msgid "Authentication LDAP" msgstr "Autenticación LDAP" #: authentication.pm:87 #, c-format msgid "LDAP Base dn" msgstr "" #: authentication.pm:88 share/compssUsers.pl:101 #, c-format msgid "LDAP Server" msgstr "Servidor LDAP" #: authentication.pm:101 fsedit.pm:21 #, c-format msgid "simple" msgstr "simple" #: authentication.pm:102 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:103 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:104 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "" #: authentication.pm:111 authentication.pm:149 #, c-format msgid "Authentication Active Directory" msgstr "Autenticación nun Directorio Activo" #: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Dominio" #: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:81 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Servidor" #: authentication.pm:115 #, c-format msgid "LDAP users database" msgstr "Base de datos de usuarios LDAP" #: authentication.pm:116 #, c-format msgid "Use Anonymous BIND " msgstr "Usar BIND anónimo" #: authentication.pm:117 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "Usuario LDAP con permiso para navegar polo Directorio Activo" #: authentication.pm:118 #, c-format msgid "Password for user" msgstr "Contrasinal para o usuario" #: authentication.pm:119 #, c-format msgid "Encryption" msgstr "Cifrado" #: authentication.pm:130 #, c-format msgid "Authentication NIS" msgstr "Autenticación NIS" #: authentication.pm:131 #, c-format msgid "NIS Domain" msgstr "Dominio NIS" #: authentication.pm:132 #, c-format msgid "NIS Server" msgstr "Servidor NIS" #: authentication.pm:137 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: authentication.pm:149 #, c-format msgid "Authentication Windows Domain" msgstr "Autenticación nun Dominio Windows" #: authentication.pm:154 #, c-format msgid "Domain Admin User Name" msgstr "Nome de Usuario do Administrador do Dominio" #: authentication.pm:155 #, c-format msgid "Domain Admin Password" msgstr "Contrasinal do Administrador do Dominio" #: authentication.pm:156 #, c-format msgid "Use Idmap for store UID/SID " msgstr "" #: authentication.pm:157 #, fuzzy, c-format msgid "Default Idmap " msgstr "Escritorio por omisión" #: authentication.pm:171 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" "Configurar o contrasinal do administrador (root) e os métodos de " "autenticación de rede" #: authentication.pm:172 #, c-format msgid "Set administrator (root) password" msgstr "Estableza o contrasinal do administrador (root)" #: authentication.pm:173 standalone/drakvpn:1125 #, c-format msgid "Authentication method" msgstr "Método de autenticación" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:178 help.pm:722 #, c-format msgid "No password" msgstr "Sen contrasinal" #: authentication.pm:184 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)" #: authentication.pm:189 network/netconnect.pm:377 network/netconnect.pm:681 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492 #, c-format msgid "Authentication" msgstr "Autenticación" #: authentication.pm:302 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:752 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Benvido o selector de sistema operativo!\n" "\n" "Escolla un sistema operativo na lista de enriba, ou\n" "agarde a que arrinque o sistema por defecto.\n" "\n" #: bootloader.pm:839 #, c-format msgid "LILO with graphical menu" msgstr "LILO con menú gráfico" #: bootloader.pm:840 #, c-format msgid "LILO with text menu" msgstr "LILO con menú de texto" #: bootloader.pm:841 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:842 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:906 #, c-format msgid "not enough room in /boot" msgstr "non hai espacio dabondo en /boot" #: bootloader.pm:1348 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Non se pode instala-lo cargador de arrinque nunha partición %s\n" #: bootloader.pm:1393 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "A configuración do seu cargador de arrinque ten que actualizarse porque " "cambiou o número da partición" #: bootloader.pm:1408 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1409 #, c-format msgid "Re-install Boot Loader" msgstr "Reinstala-lo Cargador de Arrinque" #: common.pm:139 #, c-format msgid "KB" msgstr "KB" #: common.pm:139 #, c-format msgid "MB" msgstr "MB" #: common.pm:139 #, c-format msgid "GB" msgstr "GB" #: common.pm:147 #, c-format msgid "TB" msgstr "TB" #: common.pm:155 #, c-format msgid "%d minutes" msgstr "%d minutos" #: common.pm:157 #, c-format msgid "1 minute" msgstr "1 minuto" #: common.pm:159 #, c-format msgid "%d seconds" msgstr "%d segundos" #: common.pm:254 #, c-format msgid "kdesu missing" msgstr "falla o kdesu" #: common.pm:257 #, c-format msgid "consolehelper missing" msgstr "" #: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "Austria" #: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Australia" #: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:51 #, c-format msgid "Belgium" msgstr "Bélxica" #: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "Brasil" #: crypto.pm:18 crypto.pm:52 lang.pm:230 #, c-format msgid "Canada" msgstr "Canadá" #: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881 #: network/adsl_consts.pm:890 network/adsl_consts.pm:901 #, c-format msgid "Switzerland" msgstr "Suíza" #: crypto.pm:20 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "Costa Rica" #: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "República Checa" #: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "Alemaña" #: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "Dinamarca" #: crypto.pm:24 crypto.pm:55 lang.pm:256 #, c-format msgid "Estonia" msgstr "Estonia" #: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749 #: network/adsl_consts.pm:760 network/adsl_consts.pm:771 #: network/adsl_consts.pm:782 network/adsl_consts.pm:791 #: network/adsl_consts.pm:800 network/adsl_consts.pm:809 #: network/adsl_consts.pm:818 network/adsl_consts.pm:827 #: network/adsl_consts.pm:836 network/adsl_consts.pm:845 #: network/adsl_consts.pm:854 network/adsl_consts.pm:863 #, c-format msgid "Spain" msgstr "España" #: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "Finlandia" #: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:48 #, c-format msgid "France" msgstr "Francia" #: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "Grecia" #: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "Hungría" #: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Irlanda" #: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "Israel" #: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "Italia" #: crypto.pm:33 crypto.pm:64 lang.pm:303 #, c-format msgid "Japan" msgstr "Xapón" #: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:49 #, c-format msgid "Netherlands" msgstr "Países Baixos" #: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "Noruega" #: crypto.pm:36 crypto.pm:66 lang.pm:357 #, c-format msgid "New Zealand" msgstr "Nova Celandia" #: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "Polonia" #: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "Portugal" #: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "Rusia" #: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872 #, c-format msgid "Sweden" msgstr "Suecia" #: crypto.pm:41 crypto.pm:71 lang.pm:387 #, c-format msgid "Slovakia" msgstr "Eslovaquia" #: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910 #, c-format msgid "Thailand" msgstr "Tailandia" #: crypto.pm:43 crypto.pm:76 lang.pm:411 #, c-format msgid "Taiwan" msgstr "Taiwán" #: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Sudáfrica" #: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52 #, c-format msgid "United States" msgstr "Estados Unidos" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV é un protocolo que permite montar un directorio dun servidor web\n" "de maneira local, e tratalo coma un sistema de ficheiros local (se o " "servidor web\n" "está configurado coma un servidor WebDAV). Se desexa engadir puntos de\n" "montaxe WebDAV, seleccione \"Novo\"." #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Novo" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Desmontar" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Montar" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:443 #: diskdrake/interactive.pm:667 diskdrake/interactive.pm:686 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Punto de montaxe" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Por favor, introduza a URL do servidor WebDAV" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "A URL debe comezar con http:// ou https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Servidor: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:518 #: diskdrake/interactive.pm:1184 diskdrake/interactive.pm:1259 #, c-format msgid "Mount point: " msgstr "Punto de montaxe: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1266 #, c-format msgid "Options: %s" msgstr "Opcións: %s" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "Please make a backup of your data first" msgstr "Faga primeiro unha copia de seguridade dos seus datos" #: diskdrake/hd_gtk.pm:98 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Se ten pensado usar aboot, teña coidado de deixar un espacio libre (2048\n" "sectores abondan) no comezo do disco" #: diskdrake/hd_gtk.pm:155 help.pm:530 #, c-format msgid "Wizard" msgstr "Asistente" #: diskdrake/hd_gtk.pm:188 #, c-format msgid "Choose action" msgstr "Escolla unha acción" #: diskdrake/hd_gtk.pm:192 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Ten unha partición grande con Microsoft Windows.\n" "Aconséllase que primeiro a redimensione\n" "(clique nela, e logo en \"Redimensionar\")" #: diskdrake/hd_gtk.pm:194 #, c-format msgid "Please click on a partition" msgstr "Por favor, clique nunha partición" #: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:486 #: standalone/drakbackup:2951 standalone/drakbackup:3011 #, c-format msgid "Details" msgstr "Detalles" #: diskdrake/hd_gtk.pm:254 #, c-format msgid "No hard drives found" msgstr "Non se atoparon unidades de disco duro" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:338 #, fuzzy, c-format msgid "Journalised FS" msgstr "mount fallou" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Swap" msgstr "Intercambio" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1199 #, c-format msgid "Empty" msgstr "Baleiro" #: diskdrake/hd_gtk.pm:343 #, c-format msgid "Filesystem types:" msgstr "Tipos de sistemas de ficheiros:" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``%s'' instead" msgstr "Usar ``%s'' no seu lugar" #: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:467 #, c-format msgid "Create" msgstr "Crear" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 #: diskdrake/interactive.pm:444 diskdrake/interactive.pm:620 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:107 standalone/harddrake2:116 #, c-format msgid "Type" msgstr "Tipo" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452 #: standalone/drakperm:124 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "Eliminar" #: diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``Unmount'' first" msgstr "Usar ``Desmontar'' primeiro" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose another partition" msgstr "Escolla outra partición" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose a partition" msgstr "Escolla unha partición" #: diskdrake/interactive.pm:220 #, c-format msgid "Exit" msgstr "Sair" #: diskdrake/interactive.pm:253 help.pm:530 #, c-format msgid "Undo" msgstr "Refacer" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to normal mode" msgstr "Cambiar a modo normal" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to expert mode" msgstr "Cambiar a modo experto" #: diskdrake/interactive.pm:272 #, c-format msgid "Continue anyway?" msgstr "¿Continuar de calquera xeito?" #: diskdrake/interactive.pm:275 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "Debe formatar a partición %s.\n" "Doutro xeito non se escribirá unha entrada para o punto de montaxe %s no " "fstab.\n" "Desexa saír?" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without saving" msgstr "Sair sen gardar" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without writing the partition table?" msgstr "¿Saír do programa sen garda-la táboa de particións?" #: diskdrake/interactive.pm:287 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "¿Desexa garda-las modificacións de /etc/fstab?" #: diskdrake/interactive.pm:294 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Necesita reinicia-lo equipo para que a modificación da táboa\n" "de particións se tome en conta" #: diskdrake/interactive.pm:307 help.pm:530 #, c-format msgid "Clear all" msgstr "Borrar todas" #: diskdrake/interactive.pm:308 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Asignación automática" #: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:122 #, c-format msgid "More" msgstr "Máis" #: diskdrake/interactive.pm:314 #, c-format msgid "Hard drive information" msgstr "Información da unidade de disco duro" #: diskdrake/interactive.pm:346 #, c-format msgid "All primary partitions are used" msgstr "Estanse usando tódalas particións primarias" #: diskdrake/interactive.pm:347 #, c-format msgid "I can not add any more partitions" msgstr "Non é posible engadir máis particións" #: diskdrake/interactive.pm:348 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Para ter máis particións, borre unha para poder crear unha partición " "extendida" #: diskdrake/interactive.pm:357 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:358 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:359 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:365 help.pm:530 #, c-format msgid "Save partition table" msgstr "Garda-la táboa de particións" #: diskdrake/interactive.pm:366 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Restaura-la táboa de particións" #: diskdrake/interactive.pm:367 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Recupera-la táboa de particións" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Recarga-la táboa de particións" #: diskdrake/interactive.pm:371 #, c-format msgid "Removable media automounting" msgstr "Montar automáticamente os soportes extraíbles" #: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410 #, c-format msgid "Select file" msgstr "Seleccione un ficheiro" #: diskdrake/interactive.pm:396 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "A táboa de particións de rescate non ten o\n" "mesmo tamaño. ¿Continuar de tódolos xeitos?" #: diskdrake/interactive.pm:425 #, c-format msgid "Trying to rescue partition table" msgstr "Intentando recupera-la táboa de particións" #: diskdrake/interactive.pm:431 #, c-format msgid "Detailed information" msgstr "Información detallada" #: diskdrake/interactive.pm:446 diskdrake/interactive.pm:761 #, c-format msgid "Resize" msgstr "Redimensionar" #: diskdrake/interactive.pm:447 #, c-format msgid "Format" msgstr "Formatar" #: diskdrake/interactive.pm:449 #, c-format msgid "Add to RAID" msgstr "Engadir ó RAID" #: diskdrake/interactive.pm:450 #, c-format msgid "Add to LVM" msgstr "Engadir ó LVM" #: diskdrake/interactive.pm:453 #, c-format msgid "Remove from RAID" msgstr "Quitar do RAID" #: diskdrake/interactive.pm:454 #, c-format msgid "Remove from LVM" msgstr "Quitar do LVM" #: diskdrake/interactive.pm:455 #, c-format msgid "Modify RAID" msgstr "Modifica-lo RAID" #: diskdrake/interactive.pm:456 #, c-format msgid "Use for loopback" msgstr "Usar para loopback" #: diskdrake/interactive.pm:511 #, c-format msgid "Create a new partition" msgstr "Crear unha nova partición" #: diskdrake/interactive.pm:514 #, c-format msgid "Start sector: " msgstr "Sector inicial: " #: diskdrake/interactive.pm:516 diskdrake/interactive.pm:918 #, c-format msgid "Size in MB: " msgstr "Tamaño en MB: " #: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919 #, c-format msgid "Filesystem type: " msgstr "Tipo de sistema de ficheiros: " #: diskdrake/interactive.pm:522 #, c-format msgid "Preference: " msgstr "Preferencia: " #: diskdrake/interactive.pm:525 #, c-format msgid "Logical volume name " msgstr "Nome do volume lóxico " #: diskdrake/interactive.pm:555 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Non pode crear unha nova partición\n" "(xa que alcanzou o número máximo de particións primarias).\n" "Elimine primeiro unha partición primaria e cree unha partición extendida." #: diskdrake/interactive.pm:585 #, c-format msgid "Remove the loopback file?" msgstr "Eliminar o ficheiro de loopback?" #: diskdrake/interactive.pm:604 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Ó cambia-lo tipo de partición %s, perderanse tódolos datos da partición" #: diskdrake/interactive.pm:616 #, c-format msgid "Change partition type" msgstr "Cambia-lo tipo de partición" #: diskdrake/interactive.pm:617 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "¿Qué sistema de ficheiros desexa?" #: diskdrake/interactive.pm:625 #, c-format msgid "Switching from ext2 to ext3" msgstr "Cambiando de ext2 a ext3" #: diskdrake/interactive.pm:654 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Onde desexa monta-lo ficheiro de loopback %s?" #: diskdrake/interactive.pm:655 #, c-format msgid "Where do you want to mount device %s?" msgstr "¿Onde desexa monta-lo dispositivo %s?" #: diskdrake/interactive.pm:660 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Non se pode quita-lo punto de montaxe porque esta partición estase a\n" "usar para loopback.\n" "Quite primeiro o loopback" #: diskdrake/interactive.pm:685 #, c-format msgid "Where do you want to mount %s?" msgstr "¿Onde desexa montar %s?" #: diskdrake/interactive.pm:709 diskdrake/interactive.pm:792 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Redimensionando" #: diskdrake/interactive.pm:709 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Calculando os límites do sistema de ficheiros FAT" #: diskdrake/interactive.pm:749 #, c-format msgid "This partition is not resizeable" msgstr "Esta partición non se pode redimensionar" #: diskdrake/interactive.pm:754 #, c-format msgid "All data on this partition should be backed-up" msgstr "" "Debería facer unha copia de seguridade de tódolos datos desta partición" #: diskdrake/interactive.pm:756 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Ó redimensiona-la partición %s, perderanse tódolos datos da partición" #: diskdrake/interactive.pm:761 #, c-format msgid "Choose the new size" msgstr "Escolla o novo tamaño" #: diskdrake/interactive.pm:762 #, c-format msgid "New size in MB: " msgstr "Novo tamaño en MB: " #: diskdrake/interactive.pm:805 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Para asegurar a integridade dos datos despois de redimensionar a(s) partición" "(s), \n" "executaranse unhas verificacións do sistema de ficheiros a próxima vez que " "arrinque Windows(TM)" #: diskdrake/interactive.pm:843 #, c-format msgid "Choose an existing RAID to add to" msgstr "Escolla un dos RAID para engadirlla" #: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862 #, c-format msgid "new" msgstr "novo" #: diskdrake/interactive.pm:860 #, c-format msgid "Choose an existing LVM to add to" msgstr "Escolla un dos LVM para engadirlla" #: diskdrake/interactive.pm:866 #, c-format msgid "LVM name?" msgstr "¿Nome do LVM?" #: diskdrake/interactive.pm:903 #, c-format msgid "This partition can not be used for loopback" msgstr "Esta partición non pode usarse para loopback" #: diskdrake/interactive.pm:916 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:917 #, c-format msgid "Loopback file name: " msgstr "Nome do ficheiro loopback: " #: diskdrake/interactive.pm:922 #, c-format msgid "Give a file name" msgstr "Introduza un nome de ficheiro" #: diskdrake/interactive.pm:925 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro" #: diskdrake/interactive.pm:926 #, c-format msgid "File already exists. Use it?" msgstr "O ficheiro xa existe. ¿Quere usalo?" #: diskdrake/interactive.pm:949 #, c-format msgid "Mount options" msgstr "Opcións de montaxe" #: diskdrake/interactive.pm:956 #, c-format msgid "Various" msgstr "" #: diskdrake/interactive.pm:1020 #, c-format msgid "device" msgstr "dispositivo" #: diskdrake/interactive.pm:1021 #, c-format msgid "level" msgstr "nivel" #: diskdrake/interactive.pm:1022 #, fuzzy, c-format msgid "chunk size in KiB" msgstr "tamaño do bloque de datos" #: diskdrake/interactive.pm:1039 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Teña coidado: esta operación é perigosa." #: diskdrake/interactive.pm:1054 #, c-format msgid "What type of partitioning?" msgstr "¿Qué tipo de particionamento quere?" #: diskdrake/interactive.pm:1092 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" "Necesitará reiniciar o equipo para que a modificación sexa tomada en conta" #: diskdrake/interactive.pm:1101 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "¡Escribirase no disco a táboa de particións da unidade %s!" #: diskdrake/interactive.pm:1114 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Ó formata-la partición %s, perderanse tódolos datos da partición" #: diskdrake/interactive.pm:1130 #, c-format msgid "Move files to the new partition" msgstr "Despraza-los ficheiros á nova partición" #: diskdrake/interactive.pm:1130 #, c-format msgid "Hide files" msgstr "Agocha-los ficheiros" #: diskdrake/interactive.pm:1131 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "O directorio %s xa contén datos\n" "(%s)" #: diskdrake/interactive.pm:1142 #, c-format msgid "Moving files to the new partition" msgstr "Desprazando os ficheiros á nova partición" #: diskdrake/interactive.pm:1146 #, c-format msgid "Copying %s" msgstr "Copiando %s" #: diskdrake/interactive.pm:1150 #, c-format msgid "Removing %s" msgstr "Eliminando %s" #: diskdrake/interactive.pm:1164 #, c-format msgid "partition %s is now known as %s" msgstr "o nome da partición %s é %s" #: diskdrake/interactive.pm:1165 #, c-format msgid "Partitions have been renumbered: " msgstr "" #: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1244 #, c-format msgid "Device: " msgstr "Dispositivo: " #: diskdrake/interactive.pm:1186 #, c-format msgid "Devfs name: " msgstr "Nome devfs: " #: diskdrake/interactive.pm:1187 #, c-format msgid "Volume label: " msgstr "Etiqueta de volume:" #: diskdrake/interactive.pm:1188 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Letra de unidade DOS: %s (aproximación)\n" #: diskdrake/interactive.pm:1192 diskdrake/interactive.pm:1201 #: diskdrake/interactive.pm:1262 #, c-format msgid "Type: " msgstr "Tipo: " #: diskdrake/interactive.pm:1196 install_steps_gtk.pm:300 #, c-format msgid "Name: " msgstr "Nome: " #: diskdrake/interactive.pm:1203 #, c-format msgid "Start: sector %s\n" msgstr "Inicio: sector %s\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Size: %s" msgstr "Tamaño: %s" #: diskdrake/interactive.pm:1206 #, c-format msgid ", %s sectors" msgstr ", %s sectores" #: diskdrake/interactive.pm:1208 #, c-format msgid "Cylinder %d to %d\n" msgstr "Cilindros %d a %d\n" #: diskdrake/interactive.pm:1209 #, c-format msgid "Number of logical extents: %d" msgstr "" #: diskdrake/interactive.pm:1210 #, c-format msgid "Formatted\n" msgstr "Formatado\n" #: diskdrake/interactive.pm:1211 #, c-format msgid "Not formatted\n" msgstr "Non formatado\n" #: diskdrake/interactive.pm:1212 #, c-format msgid "Mounted\n" msgstr "Montado\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1215 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Ficheiro(s) de loopback:\n" " %s\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partición de arrinque por omisión\n" " (para arrincar en MS-DOS, non para lilo)\n" #: diskdrake/interactive.pm:1218 #, c-format msgid "Level %s\n" msgstr "Nivel %s\n" #: diskdrake/interactive.pm:1219 #, fuzzy, c-format msgid "Chunk size %d KiB\n" msgstr "Tamaño do bloque de datos %d\n" #: diskdrake/interactive.pm:1220 #, c-format msgid "RAID-disks %s\n" msgstr "Discos RAID %s\n" #: diskdrake/interactive.pm:1222 #, c-format msgid "Loopback file name: %s" msgstr "Nome do ficheiro loopback: %s" #: diskdrake/interactive.pm:1225 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" #: diskdrake/interactive.pm:1228 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Esta partición Bootstrap\n" "especial é para o\n" "arrinque dual do seu sistema.\n" #: diskdrake/interactive.pm:1245 #, c-format msgid "Read-only" msgstr "Só Lectura" #: diskdrake/interactive.pm:1246 #, c-format msgid "Size: %s\n" msgstr "Tamaño: %s\n" #: diskdrake/interactive.pm:1247 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n" #: diskdrake/interactive.pm:1248 #, c-format msgid "Info: " msgstr "Información: " #: diskdrake/interactive.pm:1249 #, c-format msgid "LVM-disks %s\n" msgstr "Discos LVM %s\n" #: diskdrake/interactive.pm:1250 #, c-format msgid "Partition table type: %s\n" msgstr "Tipo de táboa de particións: %s\n" #: diskdrake/interactive.pm:1251 #, c-format msgid "on channel %d id %d\n" msgstr "na canle %d id %d\n" #: diskdrake/interactive.pm:1286 #, c-format msgid "Filesystem encryption key" msgstr "Clave de cifrado do sistema de ficheiros" #: diskdrake/interactive.pm:1287 #, c-format msgid "Choose your filesystem encryption key" msgstr "Escolla a clave de cifrado do seu sistema de ficheiros" #: diskdrake/interactive.pm:1290 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Esta clave de cifrado é moi sinxela (ten que ter polo menos %d caracteres)" #: diskdrake/interactive.pm:1291 #, c-format msgid "The encryption keys do not match" msgstr "As claves de cifrado non coinciden" #: diskdrake/interactive.pm:1294 network/netconnect.pm:1230 #: standalone/drakconnect:430 #, c-format msgid "Encryption key" msgstr "Clave de cifrado" #: diskdrake/interactive.pm:1295 #, c-format msgid "Encryption key (again)" msgstr "Clave de cifrado (outra vez)" #: diskdrake/interactive.pm:1296 standalone/drakvpn:1031 #: standalone/drakvpn:1116 #, c-format msgid "Encryption algorithm" msgstr "Algoritmo de cifrado" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Cambia-lo tipo" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "" "Non se puido entrar usando o nome de usuario %s (¿era o contrasinal " "correcto?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Autenticación no Dominio Requirida" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Qué nome de usuario" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Outro" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Por favor introduza o seu nome de usuario, contrasinal e nome de dominio " "para acceder a este servidor." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3502 #, c-format msgid "Username" msgstr "Nome de usuario" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Buscar servidores" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Buscar novos servidores" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Necesitase instala-lo paquete %s. ¿Desexa instalalo?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: do_pkgs.pm:182 #, c-format msgid "Installing packages..." msgstr "Instalando paquetes..." #: do_pkgs.pm:227 #, c-format msgid "Removing packages..." msgstr "Eliminando paquetes..." #: fs.pm:487 fs.pm:536 #, c-format msgid "Mounting partition %s" msgstr "Montando a partición %s" #: fs.pm:488 fs.pm:537 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "fallo ó monta-la partición %s no directorio %s" #: fs.pm:508 fs.pm:515 #, c-format msgid "Checking %s" msgstr "Comprobando %s" #: fs.pm:553 partition_table.pm:391 #, c-format msgid "error unmounting %s: %s" msgstr "erro desmontando %s: %s" #: fs.pm:585 #, c-format msgid "Enabling swap partition %s" msgstr "Activando a partición de intercambio %s" #: fs/format.pm:44 fs/format.pm:51 #, c-format msgid "Formatting partition %s" msgstr "Formatando a partición %s" #: fs/format.pm:48 #, c-format msgid "Creating and formatting file %s" msgstr "Creando e formatando o ficheiro %s" #: fs/format.pm:83 #, c-format msgid "I do not know how to format %s in type %s" msgstr "Descoñécese o xeito de formatar %s de tipo %s" #: fs/format.pm:88 fs/format.pm:90 #, c-format msgid "%s formatting of %s failed" msgstr "O formato %s de %s fallou" #: fs/mount_options.pm:112 #, fuzzy, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Non actualizar as horas de acceso ó inodos neste sistema de ficheiros\n" "(p.ex, para un acceso máis rápido on the news spool to speed up news " "servers)." #: fs/mount_options.pm:115 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Só se poderá montar explícitamente (p.ex.,\n" "a opción -a non fará que o sistema de ficheiros se monte)." #: fs/mount_options.pm:118 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Non interpretar os dispositivos de caracter ou bloque especiais no sistema " "de ficheiros." #: fs/mount_options.pm:120 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Non permitir a execución de binarios no sistema de ficheiros que\n" "se montou. Esta opción pode ser útil para un servidor que ten sistemas de " "ficheiros\n" "que conteñen binarios para arquitecturas diferentes da súa." #: fs/mount_options.pm:124 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs/mount_options.pm:128 #, c-format msgid "Mount the file system read-only." msgstr "Monta-lo sistema de ficheiros coma de só lectura." #: fs/mount_options.pm:130 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs/mount_options.pm:134 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "Darlle acceso de escritura ós usuarios normais" #: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "Darlle acceso de só lectura ós usuarios normais" #: fs/type.pm:372 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Non pode usar JFS para particións máis pequenas de 16MB" #: fs/type.pm:373 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Non pode usar ReiserFS para particións máis pequenas de 32MB" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "con /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "servidor" #: fsedit.pm:183 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Non se pode le-la táboa de particións do dispositivo %s, está demasiado " "deteriorada :(\n" "Pódese probar baleirando as particións erróneas (¡Perderanse TODOLOS " "datos!).\n" "A outra solución é impedir que o DrakX modifique a táboa de particións.\n" "(o erro é %s)\n" "\n" "¿Está de acordo ca perda de tódalas particións?\n" #: fsedit.pm:400 #, c-format msgid "Mount points must begin with a leading /" msgstr "Os puntos de montaxe deben comezar por /" #: fsedit.pm:401 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Os puntos de montaxe só poden conter caracteres alfanuméricos" #: fsedit.pm:402 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Xa existe unha partición co punto de montaxe %s\n" #: fsedit.pm:404 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Seleccionou unha partición RAID por software coma raíz (/).\n" "Non hai ningún cargador de arrinque capaz de manexar isto\n" "sen unha partición /boot.\n" "Asegúrese de engadir unha partición /boot" #: fsedit.pm:407 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s" msgstr "Non pode usar un Volume Lóxico LVM para o punto de montaxe %s" #: fsedit.pm:409 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Seleccionou un Volume Lóxico LVM coma raíz (/).\n" "O cargador de arrinque non é capaz de manexar isto sen unha\n" "partición /boot.\n" "Asegúrese de engadir unha partición /boot" #: fsedit.pm:412 #, c-format msgid "" "You may not be able to install lilo (since lilo does not handle a LV on " "multiple PVs)" msgstr "" #: fsedit.pm:415 fsedit.pm:417 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz" #: fsedit.pm:419 fsedit.pm:421 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Necesita un sistema de ficheiros real (ext2/ext3, reiserfs, xfs, ou jfs) " "para este punto de montaxe\n" #: fsedit.pm:423 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" "Non pode usar un sistema de ficheiros cifrado para o punto de montaxe %s" #: fsedit.pm:484 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Non hai espacio libre dabondo para asignar novas particións" #: fsedit.pm:486 #, c-format msgid "Nothing to do" msgstr "Nada que facer" #: harddrake/data.pm:61 install_any.pm:1640 #, c-format msgid "Floppy" msgstr "Disquete" #: harddrake/data.pm:71 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:87 install_any.pm:1641 #, c-format msgid "Hard Disk" msgstr "Disco" #: harddrake/data.pm:96 install_any.pm:1642 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:106 #, c-format msgid "CD/DVD burners" msgstr "Gravadoras de CD/DVD" #: harddrake/data.pm:116 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:126 standalone/drakbackup:2059 #, c-format msgid "Tape" msgstr "Cinta" #: harddrake/data.pm:135 #, c-format msgid "Videocard" msgstr "Tarxeta de Video" #: harddrake/data.pm:145 #, c-format msgid "Tvcard" msgstr "Tarxeta de TV" #: harddrake/data.pm:154 #, c-format msgid "Other MultiMedia devices" msgstr "Outros dispositivos MultiMedia" #: harddrake/data.pm:163 #, c-format msgid "Soundcard" msgstr "Tarxeta de Son" #: harddrake/data.pm:176 #, c-format msgid "Webcam" msgstr "Webcam" #: harddrake/data.pm:190 #, c-format msgid "Processors" msgstr "Procesadores" #: harddrake/data.pm:200 #, c-format msgid "ISDN adapters" msgstr "Adaptadores RDSI" #: harddrake/data.pm:210 #, c-format msgid "Ethernetcard" msgstr "Tarxeta Ethernet" #: harddrake/data.pm:228 network/netconnect.pm:567 #, c-format msgid "Modem" msgstr "Módem" #: harddrake/data.pm:238 #, c-format msgid "ADSL adapters" msgstr "Adaptadores ADSL" #: harddrake/data.pm:252 #, c-format msgid "Memory" msgstr "Memoria" #: harddrake/data.pm:261 #, c-format msgid "AGP controllers" msgstr "Controladoras AGP" #: harddrake/data.pm:270 help.pm:186 help.pm:855 #: install_steps_interactive.pm:979 #, c-format msgid "Printer" msgstr "Impresora" #: harddrake/data.pm:280 #, c-format msgid "Joystick" msgstr "Joystick" #: harddrake/data.pm:290 #, c-format msgid "(E)IDE/ATA controllers" msgstr "Controladoras (E)IDE/ATA" #: harddrake/data.pm:299 #, c-format msgid "SATA controllers" msgstr "Controladores SATA" #: harddrake/data.pm:312 #, c-format msgid "RAID controllers" msgstr "Controladores RAID" #: harddrake/data.pm:325 #, c-format msgid "Firewire controllers" msgstr "Controladoras Firewire" #: harddrake/data.pm:334 #, c-format msgid "PCMCIA controllers" msgstr "Controladoras PCMCIA" #: harddrake/data.pm:343 #, c-format msgid "SCSI controllers" msgstr "Controladoras SCSI" #: harddrake/data.pm:352 #, c-format msgid "USB controllers" msgstr "Controladoras USB" #: harddrake/data.pm:361 #, c-format msgid "USB ports" msgstr "Portos USB" #: harddrake/data.pm:370 #, c-format msgid "SMBus controllers" msgstr "Controladores SMBus" #: harddrake/data.pm:379 #, c-format msgid "Bridges and system controllers" msgstr "" #: harddrake/data.pm:388 help.pm:855 install_steps_interactive.pm:118 #: install_steps_interactive.pm:939 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "Teclado" #: harddrake/data.pm:401 help.pm:855 install_steps_interactive.pm:972 #, c-format msgid "Mouse" msgstr "Rato" #: harddrake/data.pm:415 #, c-format msgid "UPS" msgstr "SAI" #: harddrake/data.pm:424 #, c-format msgid "Scanner" msgstr "Escáner" #: harddrake/data.pm:434 standalone/harddrake2:444 #, c-format msgid "Unknown/Others" msgstr "Descoñecidos/Outros" #: harddrake/data.pm:463 #, c-format msgid "cpu # " msgstr "cpu # " #: harddrake/sound.pm:191 standalone/drakconnect:170 #: standalone/drakconnect:648 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Por Favor, Agarde... Aplicando a configuración" #: harddrake/sound.pm:227 #, c-format msgid "No alternative driver" msgstr "Non hai driver alternativo" #: harddrake/sound.pm:228 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Non hai ningún driver OSS/ALSA alternativo para a súa tarxeta de son (%s) " "que actualmente usa \"%s\"" #: harddrake/sound.pm:234 #, c-format msgid "Sound configuration" msgstr "Configuración do son" #: harddrake/sound.pm:236 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Aquí pode seleccionar un driver alternativo (tanto OSS coma ALSA) para a súa " "tarxeta de son (%s)." #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:241 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "A tarxeta está usando o driver %s\"%s\" (o driver predeterminado da tarxeta " "é \"%s\")" #: harddrake/sound.pm:243 #, fuzzy, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) foi a primeira API de son. É unha API de son " "independente do SO (está dispoñible na maioría dos sistemas UNIX(tm)) pero é " "unha API moi básica e limitada.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) é unha arquitectura modularizada " "que\n" "soporta quite a large range of ISA, USB and PCI cards.\n" "\n" "Tamén proporciona unha API superior ca OSS.\n" "\n" "Para usar alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" #: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Driver:" #: harddrake/sound.pm:262 #, c-format msgid "Trouble shooting" msgstr "" #: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1059 #: network/ndiswrapper.pm:95 network/netconnect.pm:553 #: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230 #: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362 #: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464 #: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069 #: printer/printerdrake.pm:4193 printer/printerdrake.pm:5310 #: standalone/drakTermServ:325 standalone/drakTermServ:1104 #: standalone/drakTermServ:1165 standalone/drakTermServ:1810 #: standalone/drakbackup:510 standalone/drakbackup:609 standalone/drakboot:165 #: standalone/drakclock:224 standalone/drakconnect:1007 #: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:481 #: standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Advertencia" #: harddrake/sound.pm:270 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" #: harddrake/sound.pm:278 #, c-format msgid "No open source driver" msgstr "Non hai un driver de código aberto" #: harddrake/sound.pm:279 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Non hai un driver libre para a súa tarxeta de son (%s), pero hai un driver " "propietario en \"%s\"." #: harddrake/sound.pm:282 #, c-format msgid "No known driver" msgstr "Driver descoñecido" #: harddrake/sound.pm:283 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Non hai ningún driver coñecido para a súa tarxeta de son (%s)" #: harddrake/sound.pm:287 #, c-format msgid "Unknown driver" msgstr "Driver descoñecido" #: harddrake/sound.pm:288 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Erro: O driver \"%s\" para a súa tarxeta de son non está na lista" #: harddrake/sound.pm:302 #, c-format msgid "Sound trouble shooting" msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:305 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: harddrake/sound.pm:331 #, c-format msgid "Let me pick any driver" msgstr "Déixeme escoller un driver calquera" #: harddrake/sound.pm:334 #, c-format msgid "Choosing an arbitrary driver" msgstr "Escolleando un driver ó chou" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:337 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Se sabe cal driver é o axeitado para a súa tarxeta\n" "pode escollelo na lista de enriba.\n" "\n" "O driver actual para a súa tarxeta de son \"%s\" é \"%s\" " #: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75 #: standalone/net_applet:77 #, c-format msgid "Auto-detect" msgstr "Detección automática" #: harddrake/v4l.pm:72 harddrake/v4l.pm:235 #, c-format msgid "Unknown|Generic" msgstr "Descoñecido|Xenérico" #: harddrake/v4l.pm:105 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Descoñecido|CPH05X (bt878) [varios vendedores]" #: harddrake/v4l.pm:106 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Descoñecido|CPH06X (bt878) [varios vendedores]" #: harddrake/v4l.pm:309 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: harddrake/v4l.pm:312 #, c-format msgid "Card model:" msgstr "Modelo de tarxeta:" #: harddrake/v4l.pm:313 #, fuzzy, c-format msgid "Tuner type:" msgstr "Mudar o tipo de partición" #: harddrake/v4l.pm:314 #, c-format msgid "Number of capture buffers:" msgstr "Número de bufers de captura:" #: harddrake/v4l.pm:314 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:316 #, fuzzy, c-format msgid "PLL setting:" msgstr "Formatando" #: harddrake/v4l.pm:317 #, c-format msgid "Radio support:" msgstr "Soporte de radio:" #: harddrake/v4l.pm:317 #, c-format msgid "enable radio support" msgstr "activar o soporte de radio" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Antes de continuar, debe ler con coidado os termos da licenza. Esta\n" "licenza cobre toda a distribución Mandrakelinux. Se está de acordo\n" "con tódolos termos que contén, marque o cadro \"%s\". Se non o está,\n" "prema no botón \"%s\" e reiniciarase o seu ordenador." #: help.pm:14 install_steps_gtk.pm:556 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "Aceptar" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux é un sistema multiusuario o que significa que cada usuario pode\n" "ter as súas propias preferencias, os seus propios ficheiros, etc. Pero a\n" "diferencia de \"root\", que é o administrador do sistema, os usuarios que\n" "engada agora non estarán autorizados para cambiar nada agás os seus\n" "propios ficheiros e as súas propias configuracións, protexendo o sistema de\n" "cambios involuntarios ou malintencionados que poderían afectar a todo o\n" "sistema. Terá que crear como mínimo un usuario normal para vostede -- esta\n" "é a conta que usará para o uso cotián e rutineiro. Ainda que é moi sinxelo\n" "entrar no sistema coma \"root\" para facer calquera cousa, pode ser moi\n" "perigoso! Un pequeno erro pode significar que o seu sistema non volva\n" "funcionar nunca máis. Se un usuario normal comete un erro moi grave, o\n" "peor que pode suceder é que perda algunha información, pero non\n" "afectará a todo o sistema.\n" "\n" "O primeiro campo pregúntalle un nome real. Dende logo, isto non é\n" "obrigatorio -- actualmente pode introducir o que queira. DrakX collerá a\n" "primeira palabra que introduza neste campo e copiaraa ó campo\n" "\"%s\", que é o nome que o usuario introducirá para entrar no\n" "sistema. Se o desexa, pode non facer caso do predeterminado e cambiar\n" "o nome de usuario. O seguinte paso é introducir un contrasinal. Dende\n" "o punto de vista da seguridade, o contrasinal dun usuario sen\n" "privilexios (normal) non é tan crucial coma o contrasinal de \"root\", pero\n" "esa non é razón para descoidarse deixándoa en branco ou poñendo\n" "unha moi fácil: despois de todo, os nosos ficheiros poden estar en perigo.\n" "\n" "Unha vez que clique en \"%s\", poderá engadir máis usuarios.\n" "Engada un usuario para cada un dos seus amigos, o seu pai, a súa\n" "irmá, etc. Prema \"%s\" cando remate de engadir os usuarios.\n" "\n" "Se preme o botón \"%s\" poderá cambiar a \"shell\" predeteminada\n" "para ese usuario (bash por defecto).\n" "\n" "Cando remate de engadir os usuarios, diráselle que elixa o usuario que\n" "entrará automáticamente no sistema cando se arrinca o ordenador. Se\n" "lle interesa esta funcionalidade (e non lle preocupa moito a seguridade\n" "local), elixa o usuario e o xestor de ventás que desexe, e despois clique\n" "en \"%s\". Se non está interesado nesta funcionalidade,\n" "desmarque o cadro \"%s\"." #: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783 #, c-format msgid "User name" msgstr "Nome de usuario" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237 #: install_steps_gtk.pm:698 interactive.pm:433 interactive/newt.pm:319 #: network/netconnect.pm:327 network/tools.pm:191 printer/printerdrake.pm:3678 #: standalone/drakTermServ:382 standalone/drakbackup:3953 #: standalone/drakbackup:4047 standalone/drakbackup:4064 #: standalone/drakbackup:4082 ugtk2.pm:506 #, c-format msgid "Next" msgstr "Seguinte" #: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:394 #, c-format msgid "Advanced" msgstr "Avanzado" #: help.pm:54 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "As particións listadas aquí son as particións Linux existentes detectadas " "no\n" "seu disco duro. Pode manter as eleccións feitas polo asistente, xa que son\n" "boas para as instalacións máis comúns. Se fai algún troco, debe definir " "como\n" "mínimo unha partición raíz (\"/\"). Non escolla unha partición moi pequena\n" "ou non poderá instalar moito software. Se desexa almacenar os seus datos\n" "nunha partición á parte, terá que crear unha partición \"/home\" (só será\n" "posible se ten máis dunha partición Linux dispoñible).\n" "\n" "Cada partición lístase así: \"Nome\", \"Capacidade\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." #: help.pm:85 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "A instalación de Mandrakelinux distribúese en varios CDs. Se un\n" "paquete dos seleccionados está noutro CD, o DrakX expulsará o CD\n" "actual e diralle que insira o CD requirido. Se non ten o CD requirido a " "man,\n" "prema en \"%s\", e os paquetes correspondentes non se instalarán." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" #: help.pm:146 share/compssUsers.pl:23 #, c-format msgid "Workstation" msgstr "Estación de traballo" #: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 #: share/compssUsers.pl:164 #, c-format msgid "Development" msgstr "Desenvolvemento" #: help.pm:146 share/compssUsers.pl:144 #, c-format msgid "Graphical Environment" msgstr "Entorno Gráfico" #: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "Selección individual de paquetes" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Actualizar" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "Con X" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "Con documentación básica" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Instalación minima de verdade" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "Dependencias automáticas" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": premendo no botón \"%s\" abrirase o asistente de configuración de\n" "impresoras. Consulte o capitulo correspondente da ``Guía de Inicio'' para " "obter\n" "máis información acerca de como configurar unha nova impresora. A interface\n" "presente no manual é semellante á que se usa durante a instalación." #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:611 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #: standalone/drakbackup:2349 standalone/drakbackup:2353 #, c-format msgid "Configure" msgstr "Configurar" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Este diálogo úsase para seleccionar que servicios quere que arrinquen ó\n" "iniciar o sistema.\n" "\n" "DrakX listará tódolos servicios dispoñibles na instalación actual. Examine\n" "cada un deles coidadosamente e desmarque aqueles que non son\n" "necesarios ó iniciar o sistema.\n" "\n" "Cando seleccione un servicio amosarase un pequeno texto explicatorio\n" "sobre o servicio. Sen embargo, se non está seguro sobre se un servicio\n" "é útil ou non, é mellor deixalo como estea.\n" "\n" "¡¡ Sexa especialmente coidadoso neste paso se pretende utiliza-la súa\n" "máquina coma un servidor: probablemente non quererá arrincar servicios que\n" "non precisa. Lembre que algúns servicios poden ser perigosos se están\n" "activados nun servidor. En xeral, seleccione só aqueles servicios que\n" "necesite de verdade !!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:874 #, c-format msgid "Hardware clock set to GMT" msgstr "O reloxo interno do ordenador usa a hora GMT" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "Sincronización automática da hora" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Tarxeta Gráfica\n" "\n" " Normalmente o instalador detecta automáticamente detecta e configura\n" "a tarxeta gráfica instalada no ordenador. Se non é a correcta, pode elixir\n" "nesta lista a tarxeta gráfica que está conectada ó ordenador.\n" "\n" " Se hai varios servidores dispoñibles para a súa tarxeta, con ou sen\n" "aceleración 3D, terá que elixir o servidor que se axusta mellor ás súas " "necesidades." #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Monitor\n" "\n" " O instalador normalmente detecta automáticamente detecta e configura o\n" "monitor conectado ó seu ordenador. Se non é o correcto, pode elixir nesta\n" "lista o monitor que ten conectado ó seu ordenador." #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Resolución\n" "\n" " Aquí pode escoller as resolucións e as profundidades de cor dispoñibles " "para\n" "o seu hardware gráfico. Escolla o que mellor se axuste ás súas necesidades\n" "(poderá facer trocos despois da instalación). Amosarase un exemplo da\n" "configuración elixida na pantalla." #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "Se se da a situación na que hai diferentes servidores dispoñibles para a\n" "súa tarxeta, con ou sen aceleración 3D, poderá elixir o servidor que mellor\n" "cubra as súas necesidades." #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "Opcións\n" "\n" " Estes pasos permítenlle escoller se a súa máquina debe iniciar\n" "automáticamente unha interface gráfica ó arrincar ou non. Obviamente,\n" "vostede pode querer desmarcar \"%s\" se a súa máquina vai actuar\n" "coma un servidor, ou se non tivo éxito configurando o contorno gráfico." #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "Agora ten que decidir onde quere instalar o sistema operativo\n" "Mandrakelinux no disco duro. Se o seu disco duro está baleiro, ou se\n" "outro sistema operativo está usando todo o espacio dispoñible, terá que\n" "particionalo. Básicamente, particionar un disco duro consiste en dividilo\n" "lóxicamente para crear o espacio necesario para instalar o seu novo\n" "sistema Mandrakelinux.\n" "\n" "Debido a que o proceso de particionamento é normalmente irreversible\n" "e pode provocar perdas de datos, o particionamento pode intimidar e\n" "resultar estresante para un usuario sen experiencia. Afortunadamente,\n" "DrakX inclúe un asistente que simplifica este proceso. Antes de\n" "continuar con este paso, lea toda esta sección e sobre todo, tómese\n" "o seu tempo.\n" "\n" "Dependendo da configuración do seu disco duro, hai varias opcións\n" "dispoñibles:\n" "\n" " * \"%s\". Esta opción levará a cabo un particionamento automático\n" "da(s) súa(s) unidade(s) baleira(s). Se usa esta opción non haberá máis\n" "avisos.\n" "\n" " * \"%s\". O asistente detectou que existen unha ou máis particións\n" "Linux no seu disco duro. Se desexa usalas, elixa esta opción. Entón\n" "diráselle que escolla os puntos de montaxe asociados con cada unha\n" "das particións. Os puntos de montaxe herdados selecciónanse por\n" "defecto, e para a maioría é boa idea mantelos.\n" " \n" " * \"%s\". Se Microsoft Windows está instalado no seu disco duro e\n" "ocupa todo o espacio dispoñible nel, terá que crear espacio libre para\n" "GNU/Linux. Para facelo, pode eliminar os datos e a partición Microsoft\n" "Windows (mire a solución ``Borrar todo o disco'') ou redimensionar a\n" "partición Microsoft Windows FAT ou NTFS. O redimensionamento\n" "pode levarse a cabo sen a perda de ningún dato, con tal que\n" "desfragmente previamente a partición Windows. É moi recomendable\n" "que faga unha copia de seguridade dos seus datos. Recoméndase\n" "usar esta opción se desexa usar Mandrakelinux e Microsoft\n" "Windows no mesmo ordenador.\n" "\n" " Antes de escoller esta opción, debe comprender que despois deste\n" "procedemento, o tamaño da súa partición Microsoft Windows será máis\n" "pequeno do que é agora. Terá menos espacio libre en Microsoft Windows\n" "para almacenar os seus datos ou para instalar novo software.\n" "\n" " * \"%s\". Se desexa eliminar tódolos datos e as particións presentes no\n" "seu disco duro e remprazalas polo seu novo sistema Mandrakelinux, elixa\n" "esta opción. Teña coidado, porque non poderá desfacer esta operación\n" "despois de que confirme.\n" "\n" " !! Se elixe esta opción, eliminaranse tódolos datos do seu disco " "duro. !!\n" "\n" " * \"%s\". Esta opción aparece cando Microsoft Windows colleu todo o\n" "disco duro. Se elixe esta opción simplemente eliminarase toda a unidade\n" "e comezarase de novo, particionando todo dende cero.\n" "\n" " !! Se elixe esta opción, perderanse tódolos datos do seu disco duro. !!\n" "\n" " * \"%s\". Elixa esta opción se desexa particionar a man o seu disco duro.\n" "Teña tino -- é unha elección potente pero perigosa e pode perder moi\n" "fácilmente tódolos seus datos. É por iso polo que só se recomenda esta\n" "opción se fixo algo coma isto antes e ten algunha experiencia. Para máis\n" "instruccións sobre como usar a utilidade DiskDrake, refírase á sección\n" "``Administrando as súas Particións'' da ``Guía de Inicio''." #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Usar espacio libre" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Usar partición existente" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Usa-lo espacio libre da partición de Windows" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Borra-lo disco enteiro" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Elimina-lo Windows" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "Particionamento de disco personalizado" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "Xerar un disquete de auto-instalación" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Replay" msgstr "Reproducir" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Automated" msgstr "Automatizada" #: help.pm:409 install_steps_interactive.pm:1334 #, c-format msgid "Save packages selection" msgstr "Garda-la selección de paquetes" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" #: help.pm:431 install_steps_gtk.pm:392 interactive.pm:434 #: interactive/newt.pm:318 printer/printerdrake.pm:3676 #: standalone/drakTermServ:361 standalone/drakbackup:3913 #: standalone/drakbackup:3952 standalone/drakbackup:4063 #: standalone/drakbackup:4078 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "Anterior" #: help.pm:434 #, c-format msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: help.pm:444 help.pm:588 install_steps_gtk.pm:391 #: install_steps_interactive.pm:156 standalone/drakbackup:4110 #, c-format msgid "Install" msgstr "Instalar" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "Administrador de Seguridade" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "Montar automáticamente os soportes extraíbles" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Cambiar entre modo normal/experto" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" "\"%s\": verifique a selección actual do país. Se non está nese país,\n" "prema no botón \"%s\" e escolla o seu. Se o seu país non está na lista\n" "que se amosa, prema no botón \"%s\" para obter a lista completa de paises." #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, c-format msgid "Espanol" msgstr "Español" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "con emulación da Roda" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "Universal | Calquera rato PS/2 & USB" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Seleccione o porto correcto. Por exemplo, o porto\n" "\"COM1\" de Windows chámase \"ttyS0\" en GNU/Linux." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "autenticación" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" "Un cargador de arrinqueé un pequeno programa que inicia o ordenador ó\n" "arrincar. É o responsable de arrincar o sistema enteiro. Normalmente, a\n" "instalación do cargador de arrinque é totalmente automática. DrakX\n" "analisará o sector de arrinque do disco e actuará de acordo co que atope\n" "alí:\n" "\n" " * se atopa un sector de arrinque de Windows, remprazarao cun sector de\n" "arrinque de GRUB/LILO. Deste xeito poderá arrincar GNU/Linux ou\n" "calquera outro sistema operativo que teña instalado no seu ordenador.\n" " * se atopa un sector de arrinque de GRUB ou LILO, remprazarao cun novo.\n" "\n" "Se DrakX non pode determinar onde debe situar o sector de arrinque, \n" "preguntaralle onde o debe situar. Xeralmente, \"%s\" é o mellor lugar.\n" "Se escolle \"%s\" non se instalará ningún cargador de arrinque. Use esta\n" "opción só se sabe o que está facendo." #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" #: help.pm:765 #, c-format msgid "pdq" msgstr "pdq" #: help.pm:765 printer/cups.pm:115 printer/data.pm:118 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Experto" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": se se detecta unha tarxeta de son no seu sistema, amosarase\n" "aquí. Se ve que a tarxeta de son non é a que ten posta no seu sistema,\n" "pode clicar no botón e escoller un driver diferente." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1006 #: install_steps_interactive.pm:1023 #, c-format msgid "Sound card" msgstr "Tarxeta de son" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Zona horaria" #: help.pm:855 install_steps_interactive.pm:1039 #, c-format msgid "TV card" msgstr "Tarxeta de TV" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "Tarxeta RDSI" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Interface Gráfica" #: help.pm:855 install_any.pm:1663 install_steps_interactive.pm:1057 #: standalone/drakbackup:2044 #, c-format msgid "Network" msgstr "Rede" #: help.pm:855 install_steps_interactive.pm:1072 #, c-format msgid "Proxies" msgstr "Proxys" #: help.pm:855 install_steps_interactive.pm:1083 #, c-format msgid "Security Level" msgstr "Nivel de Seguridade" #: help.pm:855 install_steps_interactive.pm:1097 #, c-format msgid "Firewall" msgstr "Cortalumes" #: help.pm:855 install_steps_interactive.pm:1113 #, c-format msgid "Bootloader" msgstr "Cargador de Arrinque" #: help.pm:855 install_steps_interactive.pm:1126 services.pm:193 #, c-format msgid "Services" msgstr "Servicios" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Elixa o disco duro que desexa borrar para poder crear a súa nova partición\n" "Mandrakelinux. Teña tino, porque se perderán tódolos datos da unidade e\n" "non se poderán volver recuperar!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Prema en \"%s\" se desexa borrar tódolos datos e particións presentes\n" "neste disco duro. Teña tino, despois de premer en \"%s\", non poderá\n" "recuperar ningún dato ou partición presente neste disco duro, incluindo\n" "calquera dato de Windows.\n" "\n" "Prema en \"%s\" para saír sen perder ningún dato ou partición presentes\n" "neste disco duro." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Seguinte ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Anterior" #: install2.pm:117 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: install2.pm:172 #, c-format msgid "You must also format %s" msgstr "Tamén debe formatar %s" #: install_any.pm:406 #, c-format msgid "Do you have further supplementary media?" msgstr "Ten soportes suplementarios adicionais?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:409 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "Atopáronse os seguintes soportes e usaranse mentres se instala: %s.\n" "\n" "\n" "Ten soportes de instalación suplementarios para configurar?" #: install_any.pm:422 printer/printerdrake.pm:3022 #: printer/printerdrake.pm:3029 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:422 #, c-format msgid "Network (http)" msgstr "Rede (http)" #: install_any.pm:422 #, c-format msgid "Network (ftp)" msgstr "Rede (ftp)" #: install_any.pm:451 #, c-format msgid "Insert the CD 1 again" msgstr "Insira o CD 1 outra vez" #: install_any.pm:479 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "Non se atoparon dispositivos" #: install_any.pm:484 #, c-format msgid "Insert the CD" msgstr "Insira o CD" #: install_any.pm:489 #, c-format msgid "Unable to mount CD-ROM" msgstr "Non foi posible montar o CDROM" #: install_any.pm:521 install_any.pm:525 #, c-format msgid "URL of the mirror?" msgstr "URL do sitio espello?" #: install_any.pm:558 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "Non se puido atopar o ficheiro hdlist neste sitio espello" #: install_any.pm:725 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Cambie o Cd-Rom!\n" "Insira o Cd-Rom que teña a etiqueta \"%s\" na unidade e prema Aceptar." #: install_any.pm:738 #, c-format msgid "Copying in progress" msgstr "Copiando" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:878 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Seleccionou os seguintes servidores: %s\n" "\n" "\n" "Estes servidores están activados por defecto. Non teñen ningún problema de\n" "seguridade coñecido, pero pode ser que se lles atopen algúns. Nese caso,\n" "debe asegurarse de actualizar tan rápido como sexa posible.\n" "\n" "\n" "Desexa instalar estes servidores?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:901 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Eliminaranse os seguintes paquetes para poder actualiza-lo seu sistema: %s\n" "\n" "\n" "¿Desexa eliminar estes paquetes?\n" #: install_any.pm:1349 partition_table.pm:603 #, c-format msgid "Error reading file %s" msgstr "Erro ó le-lo ficheiro %s" #: install_any.pm:1560 #, fuzzy, c-format msgid "The following disk(s) were renamed:" msgstr "- eliminouse %s\n" #: install_any.pm:1562 #, c-format msgid "%s (previously named as %s)" msgstr "" #: install_any.pm:1600 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos " "sistemas de ficheiros. Verifique o seu equipo para atopa-la razón deste " "problema" #: install_any.pm:1644 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1644 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1644 #, c-format msgid "NFS" msgstr "SMB" #: install_any.pm:1667 #, c-format msgid "Please choose a media" msgstr "Escolla un soporte" #: install_any.pm:1699 #, fuzzy, c-format msgid "Bad media %s" msgstr "engadiuse o soporte %s" #: install_any.pm:1711 #, c-format msgid "File already exists. Overwrite it?" msgstr "O ficheiro xa existe. ¿Desexa sobrescribilo?" #: install_any.pm:1762 #, c-format msgid "Can not make screenshots before partitioning" msgstr "Non se pode captura-la pantalla antes de face-las particións" #: install_any.pm:1769 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" "Pode escoller outras linguas que estarán dispoñibles trala instalación en %s" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Instalación do sistema" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Configuración do sistema" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Algún hardware do seu ordenador necesita drivers ``propietarios''\n" "para funcionar. Pode atopar máis información sobre eles en: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Ten que ter unha partición raíz.\n" "Para iso, cree unha partición (ou clique nunha que xa exista).\n" "Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Non ten unha partición de intercambio\n" "\n" "¿Desexa continuar de calquera xeito?" #: install_interactive.pm:70 install_steps.pm:211 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Debe ter unha partición FAT montada en /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Non hai espacio libre dabondo para asignar novas particións" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Usar particións existentes" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Non hai ningunha partición existente para usar" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Usar a partición de Windows para loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "¿Que partición desexa usar para Linux4Win?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Escolla os tamaños" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Tamaño da partición raíz en MB: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Tamaño da partición de intercambio en MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Non hai particións FAT para usar coma loopback (ou non hai espacio nelas)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "¿Qué partición desexa redimensionar?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "O redimensionador de FAT non é capaz de manexa-la súa partición,\n" "ocorreu o seguinte erro: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Calculando o tamaño da partición de Windows" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" "A partición de Windows está demasiado fragmentada. Por favor reinicie o seu " "sistema con Windows, execute a utilidade ``defrag'', e despois reinicie a " "instalación de Mandrakelinux." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "¡ADVERTENCIA!\n" "\n" "O DrakX vai redimensiona-la partición de Windows agora. Teña coidado:\n" "esta operación é perigosa. Se aínda non o fixo, necesita sair da\n" "instalación primeiro, executar \"chkdsk c:\" nun Intérprete de Comandos\n" "en Windows (Teña coidado, executa-lo programa gráfico \"scandisk\")\n" "non é dabondo, ¡asegúrese de usar \"chkdsk\" nun Intérprete de\n" "Comandos!), e opcionalmente o defrag, e reinicia-la instalación.\n" "Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n" "Cando estea seguro, prema Aceptar." #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "¿Que tamaño desexa manter para o Windows en" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "partición %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Redimensionando a partición de Windows" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "O redimensionamento da FAT fallou: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Non hai particións FAT para redimensionar (ou non hai espacio libre dabondo)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Elimina-lo Windows(TM)" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Ten máis dunha unidade de disco duro, ¿en cal delas desexa instalar linux?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "Perderanse TODALAS particións existentes e os seus datos na unidade %s" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Usar fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Agora pode particionar %s.\n" "Cando remate, non esqueza gardar usando `w'" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "Non se pode atopar espacio para a instalación" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "O Asistente de Particionamento do DrakX atopou as seguintes solucións:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "O particionamento fallou: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Activando a rede" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Desactivando a rede" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" "Noraboa, rematou a instalación.\n" "Quite o disco de arrinque da unidade e prema Intro para reiniciar.\n" "\n" "\n" "Para información sobre parches dispoñibles para esta versión\n" "de Mandrakelinux, consulte as erratas dispoñibles en:\n" "\n" "\n" "%s\n" "\n" "\n" "Para información sobre a configuración do seu sistema, despois\n" "da instalación, hai un capítulo na Guía de Usuario Oficial de Mandrakelinux." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrakelinux.com/en/errata.php3" msgstr "http://www.mandrakelinux.com/en/errata.php3" #: install_steps.pm:246 #, c-format msgid "Duplicate mount point %s" msgstr "Punto de montaxe %s duplicado" #: install_steps.pm:479 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Algúns paquetes importantes non se instalaron correctamente.\n" "A unidade de cdrom ou o cdrom están defectuosos.\n" "Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl media/main/*." "rpm\"\n" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Entrando na etapa '%s'\n" #: install_steps_gtk.pm:181 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "O seu sistema ten poucos recursos. Pode que teña algún problema\n" "ó instala-lo Mandrakelinux. Se iso acontece, pode intenta-la instalación\n" "en modo texto. Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n" "'text'." #: install_steps_gtk.pm:228 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "Selección dos Grupos de Paquetes" #: install_steps_gtk.pm:254 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "Tamaño total: %d / %d MB" #: install_steps_gtk.pm:299 #, c-format msgid "Bad package" msgstr "Paquete erróneo" #: install_steps_gtk.pm:301 #, c-format msgid "Version: " msgstr "Versión: " #: install_steps_gtk.pm:302 #, c-format msgid "Size: " msgstr "Tamaño: " #: install_steps_gtk.pm:302 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:303 #, c-format msgid "Importance: " msgstr "Importancia: " #: install_steps_gtk.pm:336 #, c-format msgid "You can not select/unselect this package" msgstr "Non pode seleccionar/deseleccionar este paquete" #: install_steps_gtk.pm:340 #, fuzzy, c-format msgid "due to missing %s" msgstr "falla o kdesu" #: install_steps_gtk.pm:341 #, c-format msgid "due to unsatisfied %s" msgstr "debido a %s non satisfeitas" #: install_steps_gtk.pm:342 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:343 #, c-format msgid "in order to keep %s" msgstr "" #: install_steps_gtk.pm:348 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Non pode seleccionar este paquete xa que non hai espacio dabondo para " "instalalo" #: install_steps_gtk.pm:351 #, c-format msgid "The following packages are going to be installed" msgstr "Vanse instala-los seguintes paquetes" #: install_steps_gtk.pm:352 #, c-format msgid "The following packages are going to be removed" msgstr "Vanse elimina-los seguintes paquetes" #: install_steps_gtk.pm:376 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Este é un paquete obrigatorio, non se pode deseleccionar" #: install_steps_gtk.pm:378 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Non pode deseleccionar este paquete. Xa está instalado" #: install_steps_gtk.pm:381 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Este paquete ten que ser actualizado\n" "¿Está seguro de que quere deseleccionalo?" #: install_steps_gtk.pm:384 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado" #: install_steps_gtk.pm:389 #, c-format msgid "Show automatically selected packages" msgstr "Amosa-los paquetes seleccionados automáticamente" #: install_steps_gtk.pm:394 #, c-format msgid "Load/Save selection" msgstr "Cargar/Gardar a selección" #: install_steps_gtk.pm:395 #, c-format msgid "Updating package selection" msgstr "Actualizando a selección de paquetes" #: install_steps_gtk.pm:400 #, c-format msgid "Minimal install" msgstr "Instalación minima" #: install_steps_gtk.pm:414 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "Escolla os paquetes que desexa instalar" #: install_steps_gtk.pm:430 install_steps_interactive.pm:706 #, c-format msgid "Installing" msgstr "Instalando" #: install_steps_gtk.pm:437 #, c-format msgid "Estimating" msgstr "Estimando" #: install_steps_gtk.pm:486 #, c-format msgid "No details" msgstr "Sen detalles" #: install_steps_gtk.pm:494 #, c-format msgid "Time remaining " msgstr "Tempo restante " #: install_steps_gtk.pm:501 #, c-format msgid "Please wait, preparing installation..." msgstr "Por favor agarde, preparando a instalación..." #: install_steps_gtk.pm:516 #, c-format msgid "%d packages" msgstr "%d paquetes" #: install_steps_gtk.pm:521 #, c-format msgid "Installing package %s" msgstr "Instalando o paquete %s" #: install_steps_gtk.pm:556 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 #, c-format msgid "Refuse" msgstr "Rexeitar" #: install_steps_gtk.pm:560 install_steps_interactive.pm:735 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Cambie o Cd-Rom!\n" "Insira o Cd-Rom que teña a etiqueta \"%s\" na unidade e prema Aceptar.\n" "Se non o ten, prema Cancelar para omiti-la instalación deste Cd-Rom." #: install_steps_gtk.pm:575 install_steps_interactive.pm:746 #, c-format msgid "There was an error ordering packages:" msgstr "Houbo un erro ó ordena-los paquetes:" #: install_steps_gtk.pm:575 install_steps_gtk.pm:579 #: install_steps_interactive.pm:746 install_steps_interactive.pm:750 #, c-format msgid "Go on anyway?" msgstr "¿Seguir de tódolos xeitos?" #: install_steps_gtk.pm:579 install_steps_interactive.pm:750 #, c-format msgid "There was an error installing packages:" msgstr "Houbo un erro ó instala-los paquetes:" #: install_steps_gtk.pm:621 install_steps_interactive.pm:921 #: install_steps_interactive.pm:1073 #, c-format msgid "not configured" msgstr "non configurado" #: install_steps_gtk.pm:684 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "Atopáronse os seguintes soportes de instalación.\n" "Se desexa saltar algún deles, pode deseleccionalo agora." #: install_steps_gtk.pm:693 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "Ten a opción de copiar os contidos dos CDs ó disco duro antes da " "instalación.\n" "Esta continuará despois dende o disco duro e os paquetes permanecerán " "dispoñibles unha vez que o sistema xa estea instalado." #: install_steps_gtk.pm:695 #, c-format msgid "Copy whole CDs" msgstr "Copiar CDs enteiros" #: install_steps_interactive.pm:85 #, c-format msgid "License agreement" msgstr "Acordo da licencia" #: install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "Notas da Versión" #: install_steps_interactive.pm:119 #, c-format msgid "Please choose your keyboard layout." msgstr "Escolla a disposición do seu teclado." #: install_steps_interactive.pm:121 #, c-format msgid "Here is the full list of available keyboards" msgstr "Esta é a lista completa dos teclados dispoñibles" #: install_steps_interactive.pm:151 #, c-format msgid "Install/Upgrade" msgstr "Instalar/Actualizar" #: install_steps_interactive.pm:152 #, c-format msgid "Is this an install or an upgrade?" msgstr "¿É isto unha instalación ou unha actualización?" #: install_steps_interactive.pm:158 #, c-format msgid "Upgrade %s" msgstr "Actualizar %s" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "Clave de cifrado para %s" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "Por favor, escolla o seu tipo de rato." #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Porto do Rato" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Por favor, escolla o porto serie onde está conectado o seu rato." #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "Emulación dos botóns" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "Emulación do Botón 2" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "Emulación do Botón 3" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Configurando as tarxetas PCMCIA..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "Configurando o IDE" #: install_steps_interactive.pm:256 network/tools.pm:181 #, c-format msgid "No partition available" msgstr "Non hai ningunha partición dispoñible" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "Examinando as particións para atopa-los puntos de montaxe" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "Escolla os puntos de montaxe" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "Elixa as particións que desexa formatar" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "Comproba-los bloques erróneos?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Non hai espacio de intercambio (swap) dabondo para levar a cabo a " "instalación, engada algún" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" "Buscando os paquetes dispoñibles e reconstruindo a base de datos rpm..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "Buscando os paquetes dispoñibles..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "Buscando os paquetes que xa están instalados..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "Buscando paquetes para actualizalos..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:826 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Escolla un espello dende o que consegui-los paquetes" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "O seu sistema non ten espacio libre dabondo para a instalación ou " "actualización (%d > %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "Cargar" #: install_steps_interactive.pm:497 standalone/drakbackup:3931 #: standalone/drakbackup:4004 standalone/drakroam:206 standalone/logdrake:173 #, c-format msgid "Save" msgstr "Gardar" #: install_steps_interactive.pm:505 #, c-format msgid "Bad file" msgstr "Ficheiro erróneo" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "O tamaño seleccionado é maior có tamaño dispoñible" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "Tipo de instalación" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Non seleccionou ningún grupo de paquetes.\n" "Por favor seleccione a instalación minima que desexa:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "Ca documentación básica (¡recomendado!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Todas" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Se ten tódolos CDs da lista inferior, prema Aceptar.\n" "Se non ten ningún deses CDs, prema Cancelar.\n" "Se só faltan algúns dos CDs, desmárqueos, e prema Aceptar." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom etiquetado \"%s\"" #: install_steps_interactive.pm:706 #, c-format msgid "Preparing installation" msgstr "Preparando a instalación" #: install_steps_interactive.pm:715 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Instalando o paquete %s\n" "%d%%" #: install_steps_interactive.pm:764 #, c-format msgid "Post-install configuration" msgstr "Configuración trala instalación" #: install_steps_interactive.pm:771 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:800 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "Agora pode descargar paquetes actualizados. Estes paquetes\n" "actualizáronse despois de que saira a distribución. Poden conter\n" "solucións de erros ou de buratos na seguridade.\n" "\n" "Para descargar estes paquetes, cómpre ter unha conexión á Internet que " "funcione.\n" "\n" "Desexa instalar as actualizacións?" #: install_steps_interactive.pm:821 #, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "" "Contactando co sitio web de Mandrakelinux para obte-la lista de espellos " "dispoñibles..." #: install_steps_interactive.pm:840 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Contactando co espello para obte-la lista dos paquetes dispoñibles..." #: install_steps_interactive.pm:844 #, c-format msgid "Unable to contact mirror %s" msgstr "Non se puido contactar co espello %s" #: install_steps_interactive.pm:844 #, c-format msgid "Would you like to try again?" msgstr "¿Desexa intentalo de novo?" #: install_steps_interactive.pm:870 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "¿Cal é a súa zona horaria?" #: install_steps_interactive.pm:875 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Sincronización automática da hora (usando NTP)" #: install_steps_interactive.pm:883 #, c-format msgid "NTP Server" msgstr "Servidor NTP" #: install_steps_interactive.pm:925 steps.pm:30 #, c-format msgid "Summary" msgstr "Resumo" #: install_steps_interactive.pm:938 install_steps_interactive.pm:946 #: install_steps_interactive.pm:964 install_steps_interactive.pm:971 #: install_steps_interactive.pm:1125 services.pm:133 #: standalone/drakbackup:1602 #, c-format msgid "System" msgstr "Sistema" #: install_steps_interactive.pm:978 install_steps_interactive.pm:1005 #: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038 #: install_steps_interactive.pm:1049 #, c-format msgid "Hardware" msgstr "Hardware" #: install_steps_interactive.pm:984 install_steps_interactive.pm:993 #, c-format msgid "Remote CUPS server" msgstr "Servidor CUPS remoto" #: install_steps_interactive.pm:984 #, c-format msgid "No printer" msgstr "Sen impresora" #: install_steps_interactive.pm:1026 #, c-format msgid "Do you have an ISA sound card?" msgstr "¿Ten unha tarxeta de son ISA?" #: install_steps_interactive.pm:1028 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "Execute \"alsaconf\" ou \"sndconfig\" despois da instalación para configura-" "la tarxeta de son" #: install_steps_interactive.pm:1030 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Non se detectou ningunha tarxeta de son. Execute \"harddrake\" despois da " "instalación" #: install_steps_interactive.pm:1050 #, c-format msgid "Graphical interface" msgstr "Interface Gráfica" #: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071 #, c-format msgid "Network & Internet" msgstr "Rede & Internet" #: install_steps_interactive.pm:1073 #, c-format msgid "configured" msgstr "configurado" #: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096 #: steps.pm:20 #, c-format msgid "Security" msgstr "Seguridade" #: install_steps_interactive.pm:1101 #, c-format msgid "activated" msgstr "activado" #: install_steps_interactive.pm:1101 #, c-format msgid "disabled" msgstr "desactivado" #: install_steps_interactive.pm:1112 #, c-format msgid "Boot" msgstr "Arrinque" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1116 #, c-format msgid "%s on %s" msgstr "%s en %s" #: install_steps_interactive.pm:1130 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: install_steps_interactive.pm:1140 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Non configurou as X. Está seguro de que desexa isto?" #: install_steps_interactive.pm:1220 #, c-format msgid "Preparing bootloader..." msgstr "Preparando o cargador de arrinque..." #: install_steps_interactive.pm:1230 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" #: install_steps_interactive.pm:1236 #, c-format msgid "Do you want to use aboot?" msgstr "¿Desexa usar aboot?" #: install_steps_interactive.pm:1239 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Erro ó instala-lo aboot, \n" "¿probar a forza-la instalación mesmo se iso destrúe a primeira partición?" #: install_steps_interactive.pm:1260 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "Con este nivel de seguridade, o acceso ós ficheiros da partición Windows " "está restrinxido ó administrador." #: install_steps_interactive.pm:1289 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Insira un disquete baleiro na unidade %s" #: install_steps_interactive.pm:1294 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Insira outro disquete para o disco dos drivers" #: install_steps_interactive.pm:1296 #, c-format msgid "Creating auto install floppy..." msgstr "Creando un disquete de auto-instalación..." #: install_steps_interactive.pm:1308 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Algunhas das etapas non foron completadas.\n" "\n" "¿Desexa sair agora?" #: install_steps_interactive.pm:1324 #, c-format msgid "Generate auto install floppy" msgstr "Xerar disquete de auto-instalación" #: install_steps_interactive.pm:1326 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "A instalación automática pode ser moi automatizada\n" "se así se desexa, nese caso tomará o control do disco\n" "duro (isto está pensado para a instalación noutro equipo).\n" "\n" "Pode preferir realizar outra vez a instalación.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Instalación de Mandrakelinux %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / entre elementos | seleccionar | seguinte " #: interactive.pm:193 #, c-format msgid "Choose a file" msgstr "Escolla un ficheiro" #: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1543 #: standalone/drakfont:656 standalone/drakroam:214 standalone/drakups:301 #: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Add" msgstr "Engadir" #: interactive.pm:318 interactive/gtk.pm:489 #, c-format msgid "Modify" msgstr "Modificar" #: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:198 #: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Remove" msgstr "Eliminar" #: interactive.pm:395 #, c-format msgid "Basic" msgstr "Básico" #: interactive.pm:433 interactive/newt.pm:319 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "Finalizar" #: interactive/newt.pm:94 #, c-format msgid "Do" msgstr "Facer" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Elección incorrecta, inténteo de novo\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "¿A súa elección? (por omisión %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Entradas que ten que encher:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "¿A súa elección? (0/1, por omisión `%s') " #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Botón `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "¿Desexa premer este botón?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "¿A súa elección? (por omisión `%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Reenviar" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "Checo (QWERTZ)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "Alemán" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "Dvorak" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "Español" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "Finlandés" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "Francés" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "Noruegués" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "Polaco" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "Ruso" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "Sueco" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "Teclado británico" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "Teclado estadounidense" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "Albanés" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "Armenio (antigo)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "Armenio (máquina de escribir)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "Armenio (fonético)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "Árabe" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "Azerbaixaní (latín)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "Belga" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "Bengalí (Disposición Inscript)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "Bengalí (Disposición Probhat)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "Búlgaro (fonético)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "Búlgaro (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "Brasileiro (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "Bosnio" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "Bielorruso" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "Suízo (Disposición alemana)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "Suízo (Disposición francesa)" #: keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "Cheroqui silábico" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "Checo (QWERTY)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "Alemán (sen teclas acentuadas)" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "Devanagari" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "Dinamarqués" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "Dvorak (EEUU)" #: keyboard.pm:213 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "Dvorak (Noruegués)" #: keyboard.pm:215 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "Dvorak (Francés)" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "Dvorak (Reino Unido)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "Dvorak (Noruegués)" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "Dvorak (Polaco)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "Dvorak (Sueco)" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "Dzongkha/Tibetano" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "Estonio" #: keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "Faroés" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "Xeorxiano (Disposición \"rusa\")" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "Xeorxiano (Disposición \"latina\")" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "Grego" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "Grego (politónico)" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "Guxarati" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "Gurmukhi" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "Croata" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "Húngaro" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "Irlandés" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "Israelí" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "Israelí (Fonético)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "Iraniano" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "Islandés" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "Italiano" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "Inuktitut" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "Xaponés de 106 teclas" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "Kannada" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "Teclado coreano" #: keyboard.pm:254 #, fuzzy, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "Árabe" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "Kirguís" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "Latinoamericano" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "Laosiano" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "Lituano AZERTY (antigo)" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "Lituano AZERTY (novo)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "Lituano \"ringleira de números\" QWERTY" #: keyboard.pm:263 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "Lituano \"fonético\" QWERTY" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "Letonio" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "Malayalam" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "Macedonio" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "Birmania (Birmano)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "Mongol (cirílico)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "Maltés (Reino Unido)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "Maltés (Estadounidense)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "Holandés" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "Oriya" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "Polaco (disposición qwerty)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "Polaco (disposición qwertz)" #: keyboard.pm:277 #, fuzzy, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "Polaco" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "Portugués" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "Canadiano (Québec)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "Romanés (qwertz)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "Romanés (qwerty)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "Ruso (Fonético)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "Saami (noruegués)" #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "Saami (sueco/finlandés)" #: keyboard.pm:289 #, fuzzy, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "Teclado Tai" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "Esloveno" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "Eslovaco (QWERTZ)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "Eslovaco (QWERTY)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "Serbio (cirílico)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "Sirio" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "Sirio (fonético)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "Telugu" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "Tamil (disposición ISCII)" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "Tamil (disposición de máquina de escribir)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "Tai (Kedmanee)" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "Tai (TIS-820)" #: keyboard.pm:307 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "Tai (Pattachote)" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "Taxik" #: keyboard.pm:315 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "Turcomán" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "Turco (modelo tradicional \"F\")" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "Turco (modelo moderno \"Q\")" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "Ucraíno" #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "Teclado urdu" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "Teclado estadounidense (internacional)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "Uzbeco (cirílico)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnamita \"ringleira de números\" QWERTY" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "Iugoslavo (latín)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "Tecla Alt dereita" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "As dúas teclas Shift simultáneamente" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "As teclas Control e Shift simultáneamente" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "Tecla BloqMayús (CapsLock)" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Teclas Shift e BloqMayús (CapsLock) simultáneamente" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Teclas Ctrl e Alt simultáneamente" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Teclas Alt e Shift simultáneamente" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "Tecla \"Windows\" esquerda" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "Tecla \"Windows\" dereita" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "As dúas teclas Control simultáneamente" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "As dúas teclas Alt simultáneamente" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "Tecla Shift esquerda" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "Tecla Shift dereita" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "Tecla Alt esquerda" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "Tecla Control esquerda" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "Tecla Control dereita" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Aquí pode elixir a tecla ou a combinación de teclas que lle\n" "permitirán cambir entre as diferentes disposicións de teclado\n" "(p.ex: latin e non latin)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Está configuración activarase despois da instalación.\n" "Durante a instalación, terá que usar a tecla Control dereita\n" "para cambiar entre as diferentes disposicións de teclado." #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:196 network/adsl_consts.pm:933 #, c-format msgid "United Arab Emirates" msgstr "Emiratos Árabes Unidos" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "Afganistán" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "Antiga e Barbuda" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "Anguila" #: lang.pm:200 #, c-format msgid "Albania" msgstr "Albania" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "Armenia" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "Antillas Neerlandesas" #: lang.pm:203 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "Antártida" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Arxentina" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "Samoa Americana" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "Acerbaixán" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnia-Hercegovina" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "Bulgaria" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "Bahrain" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:219 #, c-format msgid "Benin" msgstr "Benín" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "Illas Bermudas" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "Bolivia" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "Bahamas" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "Bután" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "Illa Bouvet" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "Botsuana" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "Bielorrusia" #: lang.pm:229 #, c-format msgid "Belize" msgstr "Belice" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Illas Cocos" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "Congo (Kinshasa)" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "República Centroafricana" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "Congo (Brazzaville)" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "Costa de Marfil" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "Illas Cook" #: lang.pm:238 #, c-format msgid "Chile" msgstr "Chile" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "Camerún" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "China" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "Colombia" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "Serbia e Montenegro" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "Cuba" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "Cabo Verde" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "Illa Christmas" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "Chipre" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "Xibutí" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "Dominica" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "República Dominicana" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "Alxeria" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "Ecuador" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "Exipto" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "Sahara Occidental" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "Eritrea" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "Etiopía" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "Fidxi" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Illas Malvinas (Falkland)" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "Micronesia" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "Illas Feroe" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "Gabón" #: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955 #: network/netconnect.pm:53 #, c-format msgid "United Kingdom" msgstr "Reino Unido" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "Granada" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "Xeorxia" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "Güiana Francesa" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "Gana" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "Xibraltar" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "Grenlandia" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "Gambia" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "Guinea" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "Guadalupe" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "Guinea Ecuatorial" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Illas Xeorxia do Sur e Sandwich do Sur" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "Guatemala" #: lang.pm:283 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "Guinea Bisau" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "Güiana" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "Hong Kong (China)" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "Illas Heard e McDonald" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "Honduras" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "Croacia" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "Haití" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "Indonesia" #: lang.pm:295 #, c-format msgid "India" msgstr "India" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "Territorios Británicos do Océano Índico" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "Iraq" #: lang.pm:298 #, c-format msgid "Iran" msgstr "Irán" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "Islandia" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "Xamaica" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "Xordania" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "Quenia" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "Kirgizstán" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "Camboia" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "Comores" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts e Nevis" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "Corea do Norte" #: lang.pm:311 #, c-format msgid "Korea" msgstr "Corea do Sur" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "Kuvait" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "Illas Caimán" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "Kazakhstán" #: lang.pm:315 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "Líbano" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "Santa Lucía" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "Liberia" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "Lesoto" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "Lituania" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "Luxemburgo" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "Letonia" #: lang.pm:325 #, c-format msgid "Libya" msgstr "Libia" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "Marrocos" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "Mónaco" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "Moldavia" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "Madagascar" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "Illas Marshall" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "Macedonia" #: lang.pm:332 #, c-format msgid "Mali" msgstr "Malí" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "Birmania" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "Mongolia" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "Illas Marianas do Norte" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "Martinica" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "Mauritania" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:339 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "Mauricio" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "Maldivas" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "Malaui" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "México" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "Malaisia" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "Mozambique" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "Namibia" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "Nova Caledonia" #: lang.pm:348 #, c-format msgid "Niger" msgstr "Níxer" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "Illa Norfolk" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "Nixeria" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "Nicaragua" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:356 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:358 #, c-format msgid "Oman" msgstr "Omán" #: lang.pm:359 #, c-format msgid "Panama" msgstr "Panamá" #: lang.pm:360 #, c-format msgid "Peru" msgstr "Perú" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "Polinesia Francesa" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "Papúa-Nova Guinea" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "Filipinas" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "Paquistán" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre e Miquelon" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "Porto Rico" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "Palestina" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "Paraguai" #: lang.pm:372 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "Qatar" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "Reunión" #: lang.pm:375 #, c-format msgid "Romania" msgstr "Romania" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "Ruanda" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "Arabia Saudí" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "Illas Salomón" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "Seychelles" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "Sudán" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "Singapur" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "Santa Helena" #: lang.pm:385 network/adsl_consts.pm:737 #, c-format msgid "Slovenia" msgstr "Eslovenia" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Illas Svalbard e Jan Mayen" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "Serra Leoa" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "San Marino" #: lang.pm:390 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "Somalia" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "Surinam" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "San Tomé e Príncipe" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "O Salvador" #: lang.pm:395 #, c-format msgid "Syria" msgstr "Siria" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "Suazilandia" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "Illas Turks e Caicos" #: lang.pm:398 #, c-format msgid "Chad" msgstr "Chad" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "Territorios Franceses do Sur" #: lang.pm:400 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "Taxikistán" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "Toquelau" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "Timor Oriental" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "Turkmenistán" #: lang.pm:406 network/adsl_consts.pm:921 #, c-format msgid "Tunisia" msgstr "Tunicia" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "Turquía" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "Trindade e Tobago" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "Tanzania" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "Ucraína" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "Uganda" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "Illas Exteriores Menores dos EEUU" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "Uruguai" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "Uzbekistán" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "O Vaticano" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "San Vincente e as Granadinas" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "Venezuela" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "Illas Virxes (Británicas)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Illas Virxes (Norteamericanas)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "Vietnam" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "Wallis e Futuna" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "Iemen" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "Maiote" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "Zambia" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "Cimbabue" #: lang.pm:1060 #, c-format msgid "You should install the following packages: %s" msgstr "Debe instalar os seguintes paquetes: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1063 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1116 #, c-format msgid "Welcome to %s" msgstr "Benvid@ a %s" #: loopback.pm:31 #, c-format msgid "Circular mounts %s\n" msgstr "Puntos de montaxe circulares %s\n" #: lvm.pm:112 #, c-format msgid "Remove the logical volumes first\n" msgstr "Quitar primeiro os volumes lóxicos\n" #: modules/interactive.pm:21 standalone/drakconnect:1068 #, c-format msgid "Parameters" msgstr "Parámetros" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "NINGÚN" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Configuración dos módulos" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Aqui pode configurar cada parárametro dos módulos." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Atopáronse %s interfaces" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "¿Ten algunha outra?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "¿Ten algunha interface %s?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Mire a información sobre o hardware" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "Instalando o driver para o controlador USB" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "Instalando o driver para o controlador firewire %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "Instalando o driver para o controlador de disco duro %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "Instalando o driver para a controladora ethernet %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Instalando o controlador para a tarxeta %s %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(módulo %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Aquí deben ir as diferentes opcións para o módulo %s.\n" "As opcións son da forma «nome=valor nome2=valor2 ...».\n" "Por exemplo pode ter «io=0x300 irq=7»" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Opcións do módulo:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "¿Que controlador de %s desexa probar?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Nalgúns casos, o controlador de %s necesita información extra\n" "para funcionar correctamente, aínda que normalmente funcione sen ela.\n" "¿Desexa especificar información extra para o controlador ou deixar que el\n" "analice o seu equipo e atope a información que necesita? Ás veces,\n" "analizar o equipo pode provocar que se pare, pero non debería\n" "causar ningún dano." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Autodetección" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Especifica-las opcións" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Fallo ó carga-lo módulo %s\n" "¿Desexa volve-lo intentar con outros parámetros?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "un número" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d números separados por comas" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d cadeas de texto separadas por comas" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "números separados por comas" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "cadeas de texto separadas por comas" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Rato Sun" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Estándar" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Rato de Roda PS2 Xenérico" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 #: network/modem.pm:137 network/netconnect.pm:692 network/netconnect.pm:697 #: network/netconnect.pm:709 network/netconnect.pm:714 #: network/netconnect.pm:730 network/netconnect.pm:732 #, c-format msgid "Automatic" msgstr "Automático" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 botón" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Rato de 2 Botóns Xenérico" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Rato de 3 Botóns Xenérico con Emulación da Roda" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Roda" #: mouse.pm:55 #, c-format msgid "serial" msgstr "serie" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Rato de 3 Botóns Xenérico" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan con Emulación da Roda" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series con Emulación da Roda" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Rato Logitech (serie, antigo tipo C7)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Rato Logitech (serie, antigo tipo C7) con Emulación da Roda" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse con Emulación da Roda" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmouse" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 botóns" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 botóns" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 botóns con emulación da roda" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Calquera rato PS/2 & USB" #: mouse.pm:89 #, fuzzy, c-format msgid "Microsoft Xbox Controller S" msgstr "Microsoft Explorer" #: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140 #, c-format msgid "none" msgstr "ningún" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Ningún rato" #: mouse.pm:299 mouse.pm:362 mouse.pm:371 mouse.pm:430 #, c-format msgid "Synaptics Touchpad" msgstr "" #: mouse.pm:556 #, c-format msgid "Please test the mouse" msgstr "Probe o seu rato" #: mouse.pm:558 #, c-format msgid "To activate the mouse," msgstr "Para activa-lo rato," #: mouse.pm:559 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "¡MOVA A RODA!" #: network/adsl.pm:19 #, c-format msgid "use PPPoE" msgstr "usar PPPoE" #: network/adsl.pm:20 #, c-format msgid "use PPTP" msgstr "usar PPTP" #: network/adsl.pm:21 #, c-format msgid "use DHCP" msgstr "usar DHCP" #: network/adsl.pm:22 #, c-format msgid "Alcatel Speedtouch USB" msgstr "Alcatel Speedtouch USB" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr " - detectado" #: network/adsl.pm:23 #, c-format msgid "Sagem (using PPPoA) USB" msgstr "" #: network/adsl.pm:24 #, c-format msgid "Sagem (using DHCP) USB" msgstr "" #: network/adsl.pm:35 network/netconnect.pm:898 #, c-format msgid "Connect to the Internet" msgstr "Conectar á Internet" #: network/adsl.pm:36 network/netconnect.pm:899 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" "O xeito máis habitual de conectar con adsl é con pppoe.\n" "Algunhas conexións usan PPTP, e algunhas usan DHCP.\n" "Se non o sabe con certeza, escolla 'usar PPPoE'" #: network/adsl.pm:41 network/netconnect.pm:903 #, c-format msgid "ADSL connection type:" msgstr "Tipo de conexión ADSL: " #: network/drakfirewall.pm:12 share/compssUsers.pl:84 #, c-format msgid "Web Server" msgstr "Servidor Web" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Nome do Servidor do Dominio" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "Servidor SSH" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "Servidor FTP" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Servidor de Correo" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "Servidor POP e IMAP" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Servidor Telnet" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "Compartimento de Ficheiros Windows (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "Servidor CUPS" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:158 #, fuzzy, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "Configurador de drakfirewall\n" "\n" "Isto configura un cortalumes persoal para esta máquina Mandrakelinux.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." #: network/drakfirewall.pm:164 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "Configurador do drakfirewall\n" "\n" "Asegúrese de que xa configurou o seu acceso á Rede/Internet con\n" "drakconnect antes de continuar." #: network/drakfirewall.pm:181 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "¿A qué servicios desexa deixarlle conectarse á Internet?" #: network/drakfirewall.pm:182 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Pode introducir diversos portos. \n" "Exemplos válidos son: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Mire en /etc/services para obter información." #: network/drakfirewall.pm:188 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Porto proporcionado incorrecto: %s.\n" "O formato correcto é \"porto/tcp\" ou \"porto/udp\", \n" "onde porto é un entre 1 e 65535.\n" "\n" "Tamén pode dar un rango de portos (p.ex: 24300:24350/udp)" #: network/drakfirewall.pm:198 #, c-format msgid "Everything (no firewall)" msgstr "Todos (sen cortalumes)" #: network/drakfirewall.pm:200 #, c-format msgid "Other ports" msgstr "Outros portos" #: network/isdn.pm:124 network/netconnect.pm:539 network/netconnect.pm:653 #: network/netconnect.pm:656 network/netconnect.pm:814 #: network/netconnect.pm:818 #, c-format msgid "Unlisted - edit manually" msgstr "Non está na lista - editar a man" #: network/isdn.pm:167 network/netconnect.pm:471 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:167 network/netconnect.pm:471 #, c-format msgid "I do not know" msgstr "Non sei" #: network/isdn.pm:168 network/netconnect.pm:471 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:169 network/netconnect.pm:471 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/netconnect.pm:697 network/netconnect.pm:714 #: network/netconnect.pm:730 #, c-format msgid "Manual" msgstr "Manual" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "Seleccione o driver para Windows (ficheiro .inf)" #: network/ndiswrapper.pm:41 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver ?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:91 network/netconnect.pm:568 #: network/netconnect.pm:572 #, c-format msgid "Manual choice" msgstr "Escolla manual" #: network/netconnect.pm:91 #, c-format msgid "Internal ISDN card" msgstr "Tarxeta RDSI interna" #: network/netconnect.pm:103 printer/printerdrake.pm:1418 #: standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Configuración manual" #: network/netconnect.pm:104 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "IP automático (BOOTP/DHCP)" #: network/netconnect.pm:106 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "IP automático (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:109 #, c-format msgid "Protocol for the rest of the world" msgstr "Protocolo para o resto do mundo" #: network/netconnect.pm:111 standalone/drakconnect:574 #, c-format msgid "European protocol (EDSS1)" msgstr "Protocolo europeo (EDSS1)" #: network/netconnect.pm:112 standalone/drakconnect:575 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protocolo para o resto do mundo\n" "Sen canle-D (liñas dedicadas)" #: network/netconnect.pm:148 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Módem USB Alcatel Speedtouch" #: network/netconnect.pm:149 #, c-format msgid "Sagem USB modem" msgstr "Módem USB Sagem" #: network/netconnect.pm:150 #, c-format msgid "Bewan modem" msgstr "Módem Bewan" #: network/netconnect.pm:151 #, c-format msgid "ECI Hi-Focus modem" msgstr "Módem ECI Hi-Focus" #: network/netconnect.pm:155 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Dynamic Host Configuration Protocol (DHCP)" #: network/netconnect.pm:156 #, c-format msgid "Manual TCP/IP configuration" msgstr "Configuración manual de TCP/IP" #: network/netconnect.pm:157 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "Point to Point Tunneling Protocol (PPTP)" #: network/netconnect.pm:158 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "PPP over Ethernet (PPPoE)" #: network/netconnect.pm:159 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "PPP over ATM (PPPoA)" #: network/netconnect.pm:160 #, c-format msgid "DSL over CAPI" msgstr "" #: network/netconnect.pm:164 #, fuzzy, c-format msgid "Bridged Ethernet LLC" msgstr "Tarxeta Ethernet" #: network/netconnect.pm:165 #, fuzzy, c-format msgid "Bridged Ethernet VC" msgstr "Tarxeta Ethernet" #: network/netconnect.pm:166 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:167 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:168 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:169 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:173 standalone/drakconnect:509 #, c-format msgid "Script-based" msgstr "Baseado nun script" #: network/netconnect.pm:174 standalone/drakconnect:509 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:175 standalone/drakconnect:509 #, c-format msgid "Terminal-based" msgstr "Baseado nun terminal" #: network/netconnect.pm:176 standalone/drakconnect:509 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:177 standalone/drakconnect:509 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:182 #, c-format msgid "Open WEP" msgstr "" #: network/netconnect.pm:183 #, c-format msgid "Restricted WEP" msgstr "" #: network/netconnect.pm:184 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: network/netconnect.pm:287 standalone/drakconnect:60 #, c-format msgid "Network & Internet Configuration" msgstr "Configuración da Rede e a Internet" #: network/netconnect.pm:293 #, c-format msgid "(detected on port %s)" msgstr "(detectado no porto %s)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:295 #, c-format msgid "(detected %s)" msgstr "(detectouse %s)" #: network/netconnect.pm:295 #, c-format msgid "(detected)" msgstr "(detectouse)" #: network/netconnect.pm:297 #, c-format msgid "Modem connection" msgstr "Conexión por módem" #: network/netconnect.pm:298 #, c-format msgid "ISDN connection" msgstr "Conexión RDSI" #: network/netconnect.pm:299 #, c-format msgid "ADSL connection" msgstr "Conexión ADSL" #: network/netconnect.pm:300 #, c-format msgid "Cable connection" msgstr "Conexión por cable" #: network/netconnect.pm:301 #, c-format msgid "LAN connection" msgstr "Conexión LAN" #: network/netconnect.pm:302 network/netconnect.pm:316 #, c-format msgid "Wireless connection" msgstr "Conexión Wireless" #: network/netconnect.pm:312 #, c-format msgid "Choose the connection you want to configure" msgstr "Elixa a conexión que desexa configurar" #: network/netconnect.pm:326 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Imos configura-la conexión %s.\n" "\n" "\n" "Prema \"%s\" para continuar." #: network/netconnect.pm:334 network/netconnect.pm:949 #, c-format msgid "Connection Configuration" msgstr "Configuración da Conexión" #: network/netconnect.pm:335 network/netconnect.pm:950 #, c-format msgid "Please fill or check the field below" msgstr "Encha ou marque o campo de embaixo" #: network/netconnect.pm:342 standalone/drakconnect:565 #, c-format msgid "Card IRQ" msgstr "IRQ da tarxeta" #: network/netconnect.pm:343 standalone/drakconnect:566 #, c-format msgid "Card mem (DMA)" msgstr "Memoria da tarxeta (DMA)" #: network/netconnect.pm:344 standalone/drakconnect:567 #, c-format msgid "Card IO" msgstr "E/S da tarxeta" #: network/netconnect.pm:345 standalone/drakconnect:568 #, c-format msgid "Card IO_0" msgstr "E/S_0 da tarxeta" #: network/netconnect.pm:346 #, c-format msgid "Card IO_1" msgstr "E/S_1 da tarxeta" #: network/netconnect.pm:347 #, c-format msgid "Your personal phone number" msgstr "O seu número de teléfono persoal" #: network/netconnect.pm:348 network/netconnect.pm:953 #, c-format msgid "Provider name (ex provider.net)" msgstr "Nome do provedor (p.ex provider.net)" #: network/netconnect.pm:349 standalone/drakconnect:504 #, c-format msgid "Provider phone number" msgstr "Número de teléfono do provedor" #: network/netconnect.pm:350 #, c-format msgid "Provider DNS 1 (optional)" msgstr "DNS 1 do provedor (opcional)" #: network/netconnect.pm:351 #, c-format msgid "Provider DNS 2 (optional)" msgstr "DNS 2 do provedor (opcional)" #: network/netconnect.pm:352 standalone/drakconnect:455 #, c-format msgid "Dialing mode" msgstr "Modo de marcación" #: network/netconnect.pm:353 standalone/drakconnect:460 #: standalone/drakconnect:528 #, c-format msgid "Connection speed" msgstr "Velocidade da conexión" #: network/netconnect.pm:354 standalone/drakconnect:465 #, fuzzy, c-format msgid "Connection timeout (in sec)" msgstr "Tipo de conexión: " #: network/netconnect.pm:357 network/netconnect.pm:378 #: network/netconnect.pm:956 standalone/drakconnect:502 #, c-format msgid "Account Login (user name)" msgstr "Login da conta (nome de usuario)" #: network/netconnect.pm:358 network/netconnect.pm:379 #: network/netconnect.pm:957 standalone/drakconnect:503 #, c-format msgid "Account Password" msgstr "Contrasinal da conta" #: network/netconnect.pm:374 #, c-format msgid "Cable: account options" msgstr "Cable: opcións da conta" #: network/netconnect.pm:377 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "" #: network/netconnect.pm:411 network/netconnect.pm:767 #: network/netconnect.pm:992 #, c-format msgid "Select the network interface to configure:" msgstr "Seleccione a interface de rede a configurar:" #: network/netconnect.pm:413 network/netconnect.pm:461 #: network/netconnect.pm:768 network/netconnect.pm:994 network/shorewall.pm:96 #: standalone/drakconnect:720 standalone/drakgw:224 standalone/drakvpn:221 #, c-format msgid "Net Device" msgstr "Dispositivo de Rede" #: network/netconnect.pm:414 network/netconnect.pm:422 #, c-format msgid "External ISDN modem" msgstr "Módem RDSI externo" #: network/netconnect.pm:460 standalone/harddrake2:215 #, c-format msgid "Select a device!" msgstr "¡Seleccione un dispositivo!" #: network/netconnect.pm:469 network/netconnect.pm:479 #: network/netconnect.pm:489 network/netconnect.pm:522 #: network/netconnect.pm:536 #, c-format msgid "ISDN Configuration" msgstr "Configuración da RDSI" #: network/netconnect.pm:470 #, c-format msgid "What kind of card do you have?" msgstr "¿Qué tipo de tarxeta ten?" #: network/netconnect.pm:480 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Se ten unha tarxeta ISA, os valores da seguinte pantalla deberían ser os " "correctos.\n" "\n" "Se ten unha tarxeta PCMCIA, ten que coñecer a \"irq\" e a \"e/s\" da " "tarxeta.\n" #: network/netconnect.pm:484 #, c-format msgid "Continue" msgstr "Continuar" #: network/netconnect.pm:484 #, c-format msgid "Abort" msgstr "Abortar" #: network/netconnect.pm:490 #, c-format msgid "Which of the following is your ISDN card?" msgstr "¿Cal das seguintes é a sua tarxeta RDSI?" #: network/netconnect.pm:508 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" "Hai un driver CAPI dispoñible para este módem. Este driver CAPI pode ofrecer " "máis capacidades có driver libre (p.ex. enviar faxes). Que driver desexa " "usar?" #: network/netconnect.pm:510 standalone/drakconnect:117 standalone/drakups:251 #: standalone/harddrake2:132 #, c-format msgid "Driver" msgstr "Controlador" #: network/netconnect.pm:522 #, c-format msgid "Which protocol do you want to use?" msgstr "¿Qué protocolo desexa usar?" #: network/netconnect.pm:524 standalone/drakconnect:117 #: standalone/drakconnect:311 standalone/drakconnect:573 #: standalone/drakvpn:1142 #, c-format msgid "Protocol" msgstr "Protocolo" #: network/netconnect.pm:536 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Seleccione o seu provedor.\n" "Se non está na lista, escolla 'Unlisted'" #: network/netconnect.pm:538 network/netconnect.pm:652 #: network/netconnect.pm:813 #, c-format msgid "Provider:" msgstr "Provedor:" #: network/netconnect.pm:553 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "O seu módem non está soportado polo sistema.\n" "Mire en http://www.linmodems.org" #: network/netconnect.pm:565 #, c-format msgid "Select the modem to configure:" msgstr "Escolla o módem que desexa configurar:" #: network/netconnect.pm:619 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Escolla o porto serie onde está conectado o seu módem." #: network/netconnect.pm:650 #, c-format msgid "Select your provider:" msgstr "Seleccione o seu provedor:" #: network/netconnect.pm:674 #, fuzzy, c-format msgid "Dialup: account options" msgstr "Opcións de chamada" #: network/netconnect.pm:677 #, c-format msgid "Connection name" msgstr "Nome da conexión" #: network/netconnect.pm:678 #, c-format msgid "Phone number" msgstr "Número de teléfono" #: network/netconnect.pm:679 #, c-format msgid "Login ID" msgstr "ID do login" #: network/netconnect.pm:694 network/netconnect.pm:727 #, fuzzy, c-format msgid "Dialup: IP parameters" msgstr "Parámetros" #: network/netconnect.pm:697 #, c-format msgid "IP parameters" msgstr "Parámetros do IP" #: network/netconnect.pm:698 network/netconnect.pm:1106 #: printer/printerdrake.pm:460 standalone/drakconnect:117 #: standalone/drakconnect:327 standalone/drakconnect:915 #: standalone/drakups:286 #, c-format msgid "IP address" msgstr "Enderezo IP" #: network/netconnect.pm:699 #, c-format msgid "Subnet mask" msgstr "Máscara de subrede" #: network/netconnect.pm:711 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:714 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:715 #, c-format msgid "Domain name" msgstr "Nome de dominio" #: network/netconnect.pm:716 network/netconnect.pm:954 #: standalone/drakconnect:1033 #, c-format msgid "First DNS Server (optional)" msgstr "Primeiro Servidor DNS (opcional)" #: network/netconnect.pm:717 network/netconnect.pm:955 #: standalone/drakconnect:1034 #, c-format msgid "Second DNS Server (optional)" msgstr "Segundo Servidor DNS (opcional)" #: network/netconnect.pm:718 #, c-format msgid "Set hostname from IP" msgstr "Asignar nome de máquina dende IP" #: network/netconnect.pm:730 standalone/drakconnect:338 #, c-format msgid "Gateway" msgstr "Pasarela" #: network/netconnect.pm:731 #, c-format msgid "Gateway IP address" msgstr "Enderezo IP da pasarela" #: network/netconnect.pm:767 #, c-format msgid "ADSL configuration" msgstr "Configuración da ADSL" #: network/netconnect.pm:811 #, c-format msgid "Please choose your ADSL provider" msgstr "Escolla o seu provedor de ADSL" #: network/netconnect.pm:832 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/netconnect.pm:836 network/netconnect.pm:841 #, c-format msgid "Use a floppy" msgstr "Usar un disquete" #: network/netconnect.pm:836 network/netconnect.pm:845 #, c-format msgid "Use my Windows partition" msgstr "Usa-la partición de Windows" #: network/netconnect.pm:836 network/netconnect.pm:848 #, c-format msgid "Do it later" msgstr "Facelo máis tarde" #: network/netconnect.pm:855 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Fallo ó copia-lo firmware, non se atopou o ficheiro %s" #: network/netconnect.pm:862 #, c-format msgid "Firmware copy succeeded" msgstr "Copia do firmware levouse a cabo con éxito" #: network/netconnect.pm:877 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: network/netconnect.pm:960 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:961 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:964 #, fuzzy, c-format msgid "Encapsulation:" msgstr "¡Noraboa!" #: network/netconnect.pm:982 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" "O módem ECI Hi-Focus non pode soportarse debido a problemas de distribución " "dos drivers binarios.\n" "\n" "Pode atopar un driver en http://eciadsl.flashtux.org/" #: network/netconnect.pm:994 #, c-format msgid "Manually load a driver" msgstr "Cargar un driver manualmente" #: network/netconnect.pm:994 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "Usar un driver para Windows (con ndiswrapper)" #: network/netconnect.pm:1001 printer/printerdrake.pm:3741 #, c-format msgid "Could not install the %s package!" msgstr "¡Non se puido instala-lo paquete %s!" #: network/netconnect.pm:1027 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Modifying the fields below will override this configuration.\n" "Do you really want to reconfigure this device?" msgstr "" "ADVERTENCIA: Este dispositivo foi configurado previamente para conectar á " "Internet.\n" "Se modifica os campos de embaixo, substituirá esta configuración.\n" "Desexa volver configurar este dispositivo?" #: network/netconnect.pm:1041 network/netconnect.pm:1520 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Noraboa. A configuración da rede e da Internet está rematada.\n" "\n" #: network/netconnect.pm:1058 #, c-format msgid "Zeroconf hostname resolution" msgstr "Resolución de nome de máquina Zeroconf" #: network/netconnect.pm:1059 network/netconnect.pm:1093 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "Configurando o dispositivo de rede %s (driver %s)" #: network/netconnect.pm:1060 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" "Poden usarse os seguintes protocolos para configurar unha conexión LAN. " "Escolla o que desexa usar" #: network/netconnect.pm:1094 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Introduza a configuración do IP desta máquina, por favor.\n" "Cada valor ten que ser introducido coma un enderezo IP en\n" "notación decimal con puntos (por exemplo, 1.2.3.4)." #: network/netconnect.pm:1101 standalone/drakconnect:384 #, c-format msgid "Assign host name from DHCP address" msgstr "Asignar o nome de máquina dende o enderezo DHCP" #: network/netconnect.pm:1102 standalone/drakconnect:386 #, c-format msgid "DHCP host name" msgstr "Nome de máquina DHCP" #: network/netconnect.pm:1107 standalone/drakconnect:332 #: standalone/drakconnect:916 standalone/drakgw:320 #, c-format msgid "Netmask" msgstr "Máscara de rede" #: network/netconnect.pm:1109 standalone/drakconnect:448 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: network/netconnect.pm:1111 standalone/drakconnect:449 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Configuración da rede" #: network/netconnect.pm:1113 standalone/drakconnect:443 #, c-format msgid "Start at boot" msgstr "Iniciar ó arrincar" #: network/netconnect.pm:1115 standalone/drakconnect:471 #, fuzzy, c-format msgid "Metric" msgstr "restrinxir" #: network/netconnect.pm:1117 standalone/drakconnect:380 #: standalone/drakconnect:919 #, c-format msgid "DHCP client" msgstr "Cliente DHCP" #: network/netconnect.pm:1119 standalone/drakconnect:390 #, fuzzy, c-format msgid "DHCP timeout (in seconds)" msgstr "Tipo de conexión: " #: network/netconnect.pm:1120 standalone/drakconnect:393 #, c-format msgid "Get DNS servers from DHCP" msgstr "Conseguir servidores DNS dende DHCP" #: network/netconnect.pm:1121 standalone/drakconnect:394 #, c-format msgid "Get YP servers from DHCP" msgstr "Conseguir servidores YP dende DHCP" #: network/netconnect.pm:1122 standalone/drakconnect:395 #, c-format msgid "Get NTPD servers from DHCP" msgstr "Conseguir servidores NTPD dende DHCP" #: network/netconnect.pm:1131 printer/printerdrake.pm:1672 #: standalone/drakconnect:683 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "Os enderezos IP deben estar no formato 1.2.3.4" #: network/netconnect.pm:1135 standalone/drakconnect:687 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "A máscara de rede debe ter o formato 255.255.224.0" #: network/netconnect.pm:1139 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "ADVERTENCIA: ¡O enderezo IP %s normalmente está reservado!" #: network/netconnect.pm:1144 standalone/drakTermServ:1731 #: standalone/drakTermServ:1732 standalone/drakTermServ:1733 #, c-format msgid "%s already in use\n" msgstr "%s xa se está usando\n" #: network/netconnect.pm:1177 #, c-format msgid "Choose an ndiswrapper driver" msgstr "Escolla un driver ndiswrapper" #: network/netconnect.pm:1179 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" #: network/netconnect.pm:1179 #, c-format msgid "Install a new driver" msgstr "Instalar un novo driver" #: network/netconnect.pm:1191 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1216 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Introduza os parámetros wireless para esta tarxeta:" #: network/netconnect.pm:1219 standalone/drakconnect:415 #, c-format msgid "Operating Mode" msgstr "Modo Operativo" #: network/netconnect.pm:1220 #, c-format msgid "Ad-hoc" msgstr "Ad-hoc" #: network/netconnect.pm:1220 #, fuzzy, c-format msgid "Managed" msgstr "Escoller a lingua" #: network/netconnect.pm:1220 #, c-format msgid "Master" msgstr "Master" #: network/netconnect.pm:1220 #, fuzzy, c-format msgid "Repeater" msgstr "Restaurar" #: network/netconnect.pm:1220 #, c-format msgid "Secondary" msgstr "Secundario" #: network/netconnect.pm:1220 #, c-format msgid "Auto" msgstr "Auto" #: network/netconnect.pm:1222 standalone/drakconnect:416 #, c-format msgid "Network name (ESSID)" msgstr "Nome de rede (ESSID)" #: network/netconnect.pm:1223 standalone/drakconnect:417 #, c-format msgid "Network ID" msgstr "ID da rede" #: network/netconnect.pm:1224 standalone/drakconnect:418 #, c-format msgid "Operating frequency" msgstr "Frecuencia operativa" #: network/netconnect.pm:1225 standalone/drakconnect:419 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:1226 standalone/drakconnect:420 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:1227 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1231 standalone/drakconnect:431 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" #: network/netconnect.pm:1232 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:1239 standalone/drakconnect:432 #, c-format msgid "Fragmentation" msgstr "Fragmentación" #: network/netconnect.pm:1240 standalone/drakconnect:433 #, c-format msgid "Iwconfig command extra arguments" msgstr "Argumentos extra do comando iwconfig" #: network/netconnect.pm:1241 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" "Aquí, vostede pode configurar algúns parámetros wireless extra coma:\n" "ap, channel, commit, enc, power, retry, sens, txpower (coma nick tómase o " "nome de máquina).\n" "\n" "Mire a páxina do manual de iwconfig(8) para obter información adicional." #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1248 standalone/drakconnect:434 #, c-format msgid "Iwspy command extra arguments" msgstr "Argumentos extra do comando iwspy" #: network/netconnect.pm:1249 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:1257 standalone/drakconnect:435 #, c-format msgid "Iwpriv command extra arguments" msgstr "Argumentos extra do comando iwpriv" #: network/netconnect.pm:1258 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1273 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1277 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:1314 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Introduza o nome da súa máquina.\n" "Ese nome debe ser un nome completamente cualificado,\n" "como ``amiñamaquina.omeulab.amiñacomp.com''.\n" "Tamén pode introducir o enderezo IP da pasarela se usa unha." #: network/netconnect.pm:1319 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:1321 standalone/drakconnect:1032 #, c-format msgid "Host name (optional)" msgstr "Nome da máquina (opcional)" #: network/netconnect.pm:1321 #, c-format msgid "Host name" msgstr "Nome de máquina" #: network/netconnect.pm:1323 #, c-format msgid "DNS server 1" msgstr "Servidor DNS 1" #: network/netconnect.pm:1324 #, c-format msgid "DNS server 2" msgstr "Servidor DNS 2" #: network/netconnect.pm:1325 #, c-format msgid "DNS server 3" msgstr "Servidor DNS 3" #: network/netconnect.pm:1326 #, c-format msgid "Search domain" msgstr "Buscar dominio" #: network/netconnect.pm:1327 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1328 #, c-format msgid "Gateway (e.g. %s)" msgstr "Pasarela (p.ex. %s)" #: network/netconnect.pm:1330 #, c-format msgid "Gateway device" msgstr "Dispositivo de pasarela" #: network/netconnect.pm:1339 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "O enderezo do servidor DNS debe estar no formato 1.2.3.4" #: network/netconnect.pm:1344 standalone/drakconnect:692 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "O enderezo da pasarela debe estar no formato 1.2.3.4" #: network/netconnect.pm:1357 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" #: network/netconnect.pm:1361 #, c-format msgid "Zeroconf Host name" msgstr "Nome de máquina Zeroconf" #: network/netconnect.pm:1364 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "O nome de máquina Zeroconf non debe conter un ." #: network/netconnect.pm:1374 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Configurou varios xeitos para conectar á Internet.\n" "Escolla o que desexa usar.\n" "\n" #: network/netconnect.pm:1376 #, c-format msgid "Internet connection" msgstr "Conexión da Internet" #: network/netconnect.pm:1385 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "A configuración está completa, ¿desexa aplica-la configuración?" #: network/netconnect.pm:1392 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "Desexa permitir que os usuarios inicien a conexión?" #: network/netconnect.pm:1412 #, c-format msgid "Do you want to start the connection at boot?" msgstr "¿Desexa que a conexión se inicie ó arrincar?" #: network/netconnect.pm:1431 #, c-format msgid "Automatically at boot" msgstr "Automáticamente ó arrincar" #: network/netconnect.pm:1433 #, c-format msgid "By using Net Applet in the system tray" msgstr "" #: network/netconnect.pm:1435 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "" #: network/netconnect.pm:1444 #, fuzzy, c-format msgid "How do you want to dial this connection?" msgstr "¿Desexa que a conexión se inicie ó arrincar?" #: network/netconnect.pm:1458 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "Cómpre reinicia-la rede. ¿Desexa reiniciala?" #: network/netconnect.pm:1465 network/netconnect.pm:1536 #, c-format msgid "Network Configuration" msgstr "Configuración da Rede" #: network/netconnect.pm:1466 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Ocurriu un problema mentres se reiniciaba a rede: \n" "\n" "%s" #: network/netconnect.pm:1475 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "¿Quere probar agora a conexión á Internet?" #: network/netconnect.pm:1483 standalone/drakconnect:1064 #, c-format msgid "Testing your connection..." msgstr "Probando a conexión..." #: network/netconnect.pm:1503 #, c-format msgid "The system is now connected to the Internet." msgstr "O sistema está conectado á Internet." #: network/netconnect.pm:1504 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Por razóns de seguridade, desconectarase agora." #: network/netconnect.pm:1505 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Semella que o sistema non está conectado á internet.\n" "Probe volvendo a configura-la conexión." #: network/netconnect.pm:1523 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Tras facer iso, aconséllase reiniciar o sistema X para\n" "evita-los problemas de mudar o nome de máquina." #: network/netconnect.pm:1524 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" #: network/netconnect.pm:1537 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Como está a facer unha instalación dende a rede, esta xa está configurada.\n" "Prema Aceptar para mante-la configuración, ou Cancelar para reconfigura-la " "conexión de rede e Internet.\n" #: network/netconnect.pm:1575 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Ocorreu un erro inesperado:\n" "%s" #: network/network.pm:315 #, c-format msgid "Proxies configuration" msgstr "Configuración dos proxys" #: network/network.pm:316 #, c-format msgid "HTTP proxy" msgstr "Proxy HTTP" #: network/network.pm:317 #, c-format msgid "FTP proxy" msgstr "Proxy FTP" #: network/network.pm:320 #, c-format msgid "Proxy should be http://..." msgstr "O proxy debería ser http://..." #: network/network.pm:321 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "O URL debería comezar con 'ftp:' ou 'http:'" #: network/shorewall.pm:25 #, c-format msgid "Firewalling configuration detected!" msgstr "¡Detectouse unha configuración de cortalumes!" #: network/shorewall.pm:26 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "¡Atención! Detectouse unha configuración de cortalumes existente. Pode que " "teña que facer algún arranxo manual trala instalación." #: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Introduza o nome da interface conectada á Internet.\n" "\n" "Exemplos:\n" "\t\tppp+ para módems ou conexións DSL, \n" "\t\teth0, ou eth1 para conexión por cable, \n" "\t\tippp+ para unha conexión RDSI.\n" #: network/tools.pm:190 #, c-format msgid "Insert floppy" msgstr "Insira un disquete" #: network/tools.pm:191 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Insira un disquete formatado con FAT na unidade %s con %s no directorio raíz " "e prema %s" #: network/tools.pm:196 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Erro de acceso ó disquete, non se puido monta-lo dispositivo %s" #: partition_table.pm:397 #, c-format msgid "mount failed: " msgstr "mount fallou: " #: partition_table.pm:502 #, c-format msgid "Extended partition not supported on this platform" msgstr "As particións estendidas non están soportadas nesta plataforma" #: partition_table.pm:520 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Ten un burato na táboa de particións, pero non se pode usar.\n" "A única solución é despraza-las particións primarias para que\n" "o burato estea despois das particións estendidas." #: partition_table.pm:611 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Fallou a restauración a partir do ficheiro %s: %s" #: partition_table.pm:613 #, c-format msgid "Bad backup file" msgstr "Ficheiro de copia de seguridade incorrecto" #: partition_table.pm:633 #, c-format msgid "Error writing to file %s" msgstr "Erro escribindo ó ficheiro %s" #: partition_table/raw.pm:249 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Está acontecendo algo grave na súa unidade.\n" "A proba para verifica-la integridade dos datos fallou.\n" "Isto significa que calquera escritura no disco terminará en datos corruptos " "aleatorios." #: pkgs.pm:23 #, c-format msgid "must have" msgstr "debe telo" #: pkgs.pm:24 #, c-format msgid "important" msgstr "importante" #: pkgs.pm:25 #, c-format msgid "very nice" msgstr "moi bo" #: pkgs.pm:26 #, c-format msgid "nice" msgstr "bo" #: pkgs.pm:27 #, c-format msgid "maybe" msgstr "indiferente" #: pkgs.pm:481 #, c-format msgid "Downloading file %s..." msgstr "Descargando o ficheiro %s..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(en %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(nesta máquina)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "Configurado noutras máquinas" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "No servidor CUPS \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4761 #: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916 #: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137 #, c-format msgid " (Default)" msgstr " (Por omisión)" #: printer/data.pm:56 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Print, Do not Queue" #: printer/data.pm:57 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:69 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:70 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:91 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:92 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:117 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: printer/data.pm:147 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Common Unix Printing System (servidor remoto)" #: printer/data.pm:148 #, c-format msgid "Remote CUPS" msgstr "CUPS remoto" #: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441 #: printer/detect.pm:478 #, c-format msgid "Unknown Model" msgstr "Modelo Descoñecido" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Impresora local" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "Impresora remota" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "Impresora nun servidor CUPS remoto" #: printer/main.pm:30 printer/printerdrake.pm:1150 #: printer/printerdrake.pm:1695 #, c-format msgid "Printer on remote lpd server" msgstr "Impresora nun servidor lpd remoto" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Impresora de rede (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Impresora SMB/Windows 95/98/NT server" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "Impresora nun servidor NetWare" #: printer/main.pm:34 printer/printerdrake.pm:1699 #, c-format msgid "Enter a printer device URI" msgstr "Introduza o URI dun dispositivo de impresión" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "" #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "recomendado" #: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671 #: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910 #: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174 #, c-format msgid "Unknown model" msgstr "Modelo descoñecido" #: printer/main.pm:354 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "Configurado nesta máquina" #: printer/main.pm:360 printer/printerdrake.pm:1239 #, c-format msgid " on parallel port #%s" msgstr " nun porto paralelo #%s" #: printer/main.pm:363 printer/printerdrake.pm:1242 #, c-format msgid ", USB printer #%s" msgstr ", impresora USB #%s" #: printer/main.pm:365 #, c-format msgid ", USB printer" msgstr ", impresora USB" #: printer/main.pm:369 #, c-format msgid ", HP printer on a parallel port" msgstr ", impresora HP nun porto paralelo" #: printer/main.pm:371 #, c-format msgid ", HP printer on USB" msgstr ", impresora HP nun USB" #: printer/main.pm:373 #, c-format msgid ", HP printer on HP JetDirect" msgstr ", impresora HP en HP JetDirect" #: printer/main.pm:375 #, c-format msgid ", HP printer" msgstr ", impresora HP" #: printer/main.pm:381 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", dispositivo multifunción no porto paralelo #%s" #: printer/main.pm:384 #, c-format msgid ", multi-function device on a parallel port" msgstr ", dispositivo multifunción nun porto paralelo" #: printer/main.pm:386 #, c-format msgid ", multi-function device on USB" msgstr ", dispositivo multifunción por USB" #: printer/main.pm:388 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", dispositivo multifunción en HP JetDirect" #: printer/main.pm:390 #, c-format msgid ", multi-function device" msgstr ", dispositivo multifunción" #: printer/main.pm:394 #, c-format msgid ", printing to %s" msgstr ", imprimindo en %s" #: printer/main.pm:397 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: printer/main.pm:400 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", máquina TCP/IP \"%s\", porto %s" #: printer/main.pm:405 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " nun servidor SMB/Windows \"%s\", recurso \"%s\"" #: printer/main.pm:410 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " nun servidor Novell \"%s\", impresora \"%s\"" #: printer/main.pm:413 #, c-format msgid ", using command %s" msgstr ", usando o comando %s" #: printer/main.pm:428 #, c-format msgid "Parallel port #%s" msgstr "Porto paralelo #%s" #: printer/main.pm:431 printer/printerdrake.pm:1260 #: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305 #, c-format msgid "USB printer #%s" msgstr "Impresora USB #%s" #: printer/main.pm:433 #, c-format msgid "USB printer" msgstr "Impresora USB" #: printer/main.pm:437 #, c-format msgid "HP printer on a parallel port" msgstr "Impresora HP nun porto paralelo" #: printer/main.pm:439 #, c-format msgid "HP printer on USB" msgstr "Impresora HP nun USB" #: printer/main.pm:441 #, c-format msgid "HP printer on HP JetDirect" msgstr "Impresora HP en HP JetDirect" #: printer/main.pm:443 #, c-format msgid "HP printer" msgstr "Impresora HP" #: printer/main.pm:449 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Dispositivo multifunción no porto paralelo #%s" #: printer/main.pm:452 #, c-format msgid "Multi-function device on a parallel port" msgstr "Dispositivo multifunción nun porto paralelo" #: printer/main.pm:454 #, c-format msgid "Multi-function device on USB" msgstr "Dispositivo multifunción por USB" #: printer/main.pm:456 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Dispositivo multifunción en HP JetDirect" #: printer/main.pm:458 #, c-format msgid "Multi-function device" msgstr "Dispositivo multifunción" #: printer/main.pm:462 #, c-format msgid "Prints into %s" msgstr "Imprime en %s" #: printer/main.pm:465 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "Servidor LPD \"%s\", impresora \"%s\"" #: printer/main.pm:468 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "Máquina TCP/IP \"%s\", porto %s" #: printer/main.pm:473 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "Servidor SMB/Windows \"%s\", recurso \"%s\"" #: printer/main.pm:478 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Servidor Novell \"%s\", impresora \"%s\"" #: printer/main.pm:481 #, c-format msgid "Uses command %s" msgstr "Usa o comando %s" #: printer/main.pm:483 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:631 printer/printerdrake.pm:856 #: printer/printerdrake.pm:2953 #, c-format msgid "Raw printer (No driver)" msgstr "Impresora Raw (Sen driver)" #: printer/main.pm:1181 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "Rede(s) locais" #: printer/main.pm:1183 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "Interface \"%s\"" #: printer/main.pm:1185 #, c-format msgid "Network %s" msgstr "Rede %s" #: printer/main.pm:1187 #, c-format msgid "Host %s" msgstr "Máquina %s" #: printer/main.pm:1216 #, c-format msgid "%s (Port %s)" msgstr "%s (Porto %s)" #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "Configuración de impresora CUPS" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Aqui pode escoller qué impresoras das conectadas a esta máquina debe ser " "accesible a máquinas remotas e a cales máquinas." #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Tamén pode decidir aqui cales das impresoras das máquinas remotas estarán " "dispoñibles dende esta máquina." #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "As impresoras desta máquina poden usarse dende outros ordenadores." #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Buscar automáticamente as impresoras dispoñibles das máquina remotas" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Compartimento de Impresoras en máquinas/redes:" #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "Configuración personalizada" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Non hai máquinas remotas" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "Servidores CUPS adicionais: " #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "Modo de impresión de texto en Xaponés" #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Correción automática da configuración de CUPS" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4397 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "Servidor CUPS remoto e sen daemon CUPS local" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "Acendida" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "Apagada" #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" "Neste modo o daemon CUPS local pararase e tódalas solicitudes de impresión " "irán directamente ó servidor especificado embaixo. Teña en conta que non é " "posible definir colas de impresión locais despois e se o servidor " "especificado está caído non se poderá imprimir dende esta máquina." #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "Compartimento de impresoras locais" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Estas son as máquinas e as redes nas que as impresoras conectadas localmente " "deberían estar dispoñibles:" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "Engadir máquina/rede" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "Editar a máquina/rede seleccionada" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "Eliminar a máquina/rede seleccionada" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "Enderezo IP da máquina/rede:" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" "Escolla a rede ou máquina na que as impresoras conectadas localmente deben " "estar dispoñibles:" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "" #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "O IP da máquina/rede que introduciu non é correcto.\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "Exemplos de IPs correctos:\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "Esta máquina/rede xa está na lista, e non se pode engadir outra vez.\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Accedendo a impresoras en servidores CUPS remotos" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Engada aquí os servidores CUPS dos que desexa usar as súas impresoras. Só " "cómpre facer isto se os servidores non difunden (broadcast) a información " "das súas impresoras pola rede local." #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "Engadir servidor" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "Edita-lo servidor seleccionado" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "Elimina-lo servidor seleccionado" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Introduza o enderezo IP e o porto da máquina conectada ás impresoras que " "quere usar." #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "Se non se especifica un porto, tomarase o 631 coma predeterminado." #: printer/printerdrake.pm:422 #, fuzzy, c-format msgid "Server IP missing!" msgstr "Servidor de impresión" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "O enderezo IP que introduciu non é correcto.\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:1924 #, c-format msgid "The port number should be an integer!" msgstr "¡O número do porto debe ser un número enteiro!" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Este servidor xa está na lista, non pode engadilo de novo.\n" #: printer/printerdrake.pm:462 printer/printerdrake.pm:1951 #: standalone/drakups:251 standalone/harddrake2:51 #, c-format msgid "Port" msgstr "Porto" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "Impresora nun servidor lpd remoto" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 #, fuzzy, c-format msgid "CUPS server name or IP address missing." msgstr "Servidor de impresión" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:680 printer/printerdrake.pm:746 #: printer/printerdrake.pm:773 printer/printerdrake.pm:832 #: printer/printerdrake.pm:874 printer/printerdrake.pm:884 #: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225 #: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305 #: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374 #: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458 #: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542 #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804 #: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948 #: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656 #: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771 #: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906 #: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079 #: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110 #: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300 #: printer/printerdrake.pm:4306 printer/printerdrake.pm:4326 #: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542 #: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571 #: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4008 #: printer/printerdrake.pm:4543 #, c-format msgid "Reading printer data..." msgstr "Lendo os datos da impresora..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "Reiniciando CUPS..." #: printer/printerdrake.pm:614 printer/printerdrake.pm:634 #, c-format msgid "Select Printer Connection" msgstr "Selección da Conexión da Impresora" #: printer/printerdrake.pm:615 #, c-format msgid "How is the printer connected?" msgstr "¿Como está conectada a impresora?" #: printer/printerdrake.pm:617 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Cun servidor CUPS remoto, non terá que configurar aquíningunha impresora, xa " "que serán detectadas automaticamente." #: printer/printerdrake.pm:620 printer/printerdrake.pm:4786 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" "\n" "ADVERTENCIA: Non hai ningunha conexión á rede local activa, as impresoras " "remotas non poderán ser detectadas ou probadas!" #: printer/printerdrake.pm:627 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" "Detección automática de impresoras (Locais, TCP/Socket, impresoras SMB, e " "URI do dispositivo)" #: printer/printerdrake.pm:629 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:635 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:637 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:641 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "¡A opción %s debe ser un número enteiro!" #: printer/printerdrake.pm:680 #, c-format msgid "Checking your system..." msgstr "Comprobando o sistema..." #: printer/printerdrake.pm:697 #, c-format msgid "and one unknown printer" msgstr "e unha impresora descoñecida" #: printer/printerdrake.pm:699 #, c-format msgid "and %d unknown printers" msgstr "e %d impresoras descoñecidas" #: printer/printerdrake.pm:703 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "As seguintes impresoras\n" "\n" "%s%s\n" "están conectadas directamente ó sistema" #: printer/printerdrake.pm:705 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "A seguinte impresora\n" "\n" "%s%s\n" "está conectada directamente ó sistema" #: printer/printerdrake.pm:706 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "A seguinte impresora\n" "\n" "%s%s\n" "está conectada directamente ó sistema" #: printer/printerdrake.pm:710 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Hai unha impresora descoñecida conectada directamente ó sistema" #: printer/printerdrake.pm:711 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Hai %d impresoras descoñecidas conectadas directamente ó sistema" #: printer/printerdrake.pm:714 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" "Non se atopou ningunha impresora que estea conectada directamente á máquina" #: printer/printerdrake.pm:717 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Asegúrese de que tódalas impresoras están conectadas e prendidas).\n" #: printer/printerdrake.pm:730 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Desexa habilitar a impresión nas impresoras mencionadas enriba ou nas " "impresoras da rede local?\n" #: printer/printerdrake.pm:731 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Desexa habilitar a impresión en impresoras da rede local?\n" #: printer/printerdrake.pm:733 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Desexa habilitar a impresión nas impresoras mencionadas enriba?\n" #: printer/printerdrake.pm:734 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Está seguro de que desexa configurar a impresión nesta máquina?\n" #: printer/printerdrake.pm:735 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "NOTA: Dependendo do modelo da impresora e do sistema de impresión " "instalaranse ata %d MB de software adicional." #: printer/printerdrake.pm:774 #, c-format msgid "Searching for new printers..." msgstr "Buscando novas impresoras..." #: printer/printerdrake.pm:833 #, c-format msgid "Found printer on %s..." msgstr "Atopouse unha impresora en %s..." #: printer/printerdrake.pm:858 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:859 #, c-format msgid " on " msgstr " en " #: printer/printerdrake.pm:860 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:865 printer/printerdrake.pm:2960 #, c-format msgid "Printer model selection" msgstr "Selección do modelo de impresora" #: printer/printerdrake.pm:866 printer/printerdrake.pm:2961 #, c-format msgid "Which printer model do you have?" msgstr "¿Qué modelo de impresora ten?" #: printer/printerdrake.pm:867 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake non puido determinar qué modelo é a impresora %s. Escolla o " "modelo correcto da lista." #: printer/printerdrake.pm:870 printer/printerdrake.pm:2966 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Se a impresora non está na lista, escolla unha compatible (mire o manual da " "impresora) ou unha similar." #: printer/printerdrake.pm:875 #, c-format msgid "Configuring printer on %s..." msgstr "Configurando impresora en %s..." #: printer/printerdrake.pm:885 printer/printerdrake.pm:4563 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Configurando a impresora \"%s\"..." #: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063 #: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191 #: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973 #, c-format msgid "Add a new printer" msgstr "Engadir unha nova impresora" #: printer/printerdrake.pm:1052 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Benvid@ ó Asistente de Configuración de Impresoras\n" "\n" "Este asistente axudaralle a instalar impresoras locais ou remotas para que " "sexan usadas dende esta máquina e tamén dende outras máquinas da rede.\n" "\n" "Pregúntaralle toda a información necesaria para configurar a impresora e " "dalle acceso a tódolos drivers para impresoras dispoñibles, as opcións do " "driver, e os tipos de conexión de impresora." #: printer/printerdrake.pm:1065 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Benvid@ ó Asistente de Configuración de Impresoras\n" "\n" "Este asistente axudaralle a instalar as impresoras conectadas a este " "ordenador, conectadas directamente á rede ou a unha máquina Windows remota.\n" "\n" "Enchufe e prenda tódalas impresoras conectadas a esta máquina para que " "poidan ser detectadas automáticamente. Tamén as impresoras da rede e as " "máquinas Windows deben estar conectadas e acesas.\n" "\n" "Teña en conta que a detección automática de impresoras na rede leva máis " "tempo cá detección automática das impresoras conectadas a esta máquina. Así " "que deshabilite a detección automática das impresoras da rede e/ou que " "estean conectadas a máquinas Windows cando non a necesite.\n" "\n" " Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non " "desexa configurar as impresoras agora." #: printer/printerdrake.pm:1074 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Benvid@ ó Asistente de Configuración de Impresoras\n" "\n" "Este asistente axudaralle a instalar as impresoras conectadas a este " "ordenador.\n" "\n" "Enchufe e prenda tódalas impresoras conectadas a esta máquina para que " "poidan ser detectadas automáticamente.\n" "\n" " Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non " "desexa configurar as impresoras agora." #: printer/printerdrake.pm:1082 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Benvid@ ó Asistente de Configuración de Impresoras\n" "\n" "Este asistente axudaralle a instalar as impresoras conectadas a este " "ordenador, conectadas directamente á rede.\n" "\n" "Se ten impresoras conectadas a esta máquina, enchúfeas a este ordenador e " "acéndaas para que poidan ser detectadas automáticamente.Tamén as impresoras " "da rede deben estar conectadas e prendidas.\n" "\n" "Teña en conta que a detección automática de impresoras na rede leva máis " "tempo cá detección automática das impresoras conectadas a esta máquina. Así " "que deshabilite a detección automática das impresoras da rede cando non a " "necesite.\n" "\n" " Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non " "desexa configurar as impresoras agora." #: printer/printerdrake.pm:1091 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Benvid@ ó Asistente de Configuración de Impresoras\n" "\n" "Este asistente axudaralle a instalar as impresoras conectadas a este " "ordenador.\n" "\n" "Se ten impresoras conectadas a este ordenador, enchúfeas a este ordenador e " "préndaas para que poidan ser detectadas automáticamente.\n" "\n" " Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non " "desexa configurar as impresoras agora." #: printer/printerdrake.pm:1142 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Detectar automáticamente as impresoras conectadas a esta máquina" #: printer/printerdrake.pm:1145 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" "Detectar automáticamente as impresoras conectadas directamente á rede local." #: printer/printerdrake.pm:1148 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Detectar automáticamente as impresoras conectadas a máquinas que executan " "Microsoft Windows" #: printer/printerdrake.pm:1151 #, c-format msgid "No auto-detection" msgstr "Sen detección automática" #: printer/printerdrake.pm:1171 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" #: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592 #: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806 #: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061 #: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079 #: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231 #: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363 #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465 #, c-format msgid "Could not install the %s packages!" msgstr "¡Non se puido instala-los paquetes %s!" #: printer/printerdrake.pm:1209 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "Omitindo a detección automática de servidor Windows/SMB" #: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360 #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Printer auto-detection" msgstr "Detección automática da impresora" #: printer/printerdrake.pm:1215 #, c-format msgid "Detecting devices..." msgstr "Detectando os dispositivos..." #: printer/printerdrake.pm:1245 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", impresora de rede \"%s\", porto %s" #: printer/printerdrake.pm:1248 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", impresora \"%s\" nun servidor SMB/Windows \"%s\"" #: printer/printerdrake.pm:1252 #, c-format msgid "Detected %s" msgstr "Detectada %s" #: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284 #: printer/printerdrake.pm:1302 #, c-format msgid "Printer on parallel port #%s" msgstr "Impresora no porto paralelo #%s" #: printer/printerdrake.pm:1263 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Impresora de rede \"%s\", porto %s" #: printer/printerdrake.pm:1266 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Impresora \"%s\" no servidor SMB/Windows \"%s\"" #: printer/printerdrake.pm:1347 #, c-format msgid "Local Printer" msgstr "Impresora Local" #: printer/printerdrake.pm:1348 #, fuzzy, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Non se atopou ningunha impresora local! Para instalar manualmente unha " "impresora introduza un nome de dispositivo/nome de ficheiro na liña de " "comandos (input line) (Portos Paralelos: /dev/lp0, /dev/lp1, ..., " "equivalentes a LPT1:, LPT2:, ..., primeira impresora USB: /dev/usb/lp0, " "segunda impresora USB: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1352 #, c-format msgid "You must enter a device or file name!" msgstr "Debe introducir un dispositivo ou un nome de ficheiro!" #: printer/printerdrake.pm:1361 #, c-format msgid "No printer found!" msgstr "¡Non se atoparon impresoras!" #: printer/printerdrake.pm:1369 #, c-format msgid "Local Printers" msgstr "Impresoras Locais" #: printer/printerdrake.pm:1370 #, c-format msgid "Available printers" msgstr "Impresoras dispoñibles" #: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383 #, c-format msgid "The following printer was auto-detected. " msgstr "Detectouse automáticamente a seguinte impresora. " #: printer/printerdrake.pm:1376 #, fuzzy, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Se non é a que desexa configurar, introduza un nome de dispositivo/nome de " "ficheiro na liña de comandos (input line)" #: printer/printerdrake.pm:1377 #, fuzzy, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "Alternativamente, pode especificar un nome de dispositivo/nome de ficheiro " "na liña de comandos (input line)" #: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" "Aqui ten unha lista de tódalas impresoras que se detectaron automáticamente. " #: printer/printerdrake.pm:1380 #, fuzzy, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Escolla a impresora que desexa configurar ou introduza un nome de " "dispositivo/nome de ficheiro na liña de comandos (input line)" #: printer/printerdrake.pm:1381 #, fuzzy, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Escolla a impresora á que deben ir os traballos de impresión ou introduza un " "nome de dispositivo/nome de ficheiro na liña de comandos (input line)" #: printer/printerdrake.pm:1385 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1386 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Actualmente, non hai ningunha posibilidade alternativa dispoñible" #: printer/printerdrake.pm:1389 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: printer/printerdrake.pm:1390 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Escolla a impresora á que deben ir os traballos." #: printer/printerdrake.pm:1392 #, fuzzy, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Escolla o porto ó que está conectado a impresora ou introduza un nome de " "dispositivo/nome de ficheiro na liña de comandos (input line)" #: printer/printerdrake.pm:1393 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Escolla o porto onde está conectada a impresora." #: printer/printerdrake.pm:1395 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Portos Paralelos: /dev/lp0, /dev/lp1, ..., equivalentes a LPT1:, " "LPT2:, ..., 1ª impresora USB: /dev/usb/lp0, 2ª impresora USB: /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1399 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Debe escoller/introducir unha impresora/dispositivo!" #: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502 #: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732 #: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970 #: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072 #: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092 #, c-format msgid "Aborting" msgstr "Abortando" #: printer/printerdrake.pm:1475 #, c-format msgid "Remote lpd Printer Options" msgstr "Opcións da Impresora remota lpd" #: printer/printerdrake.pm:1476 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Para usar unha impresora lpd remota, cómpre indicar o nome de máquina do " "servidor de impresión e o nome da impresora nese servidor." #: printer/printerdrake.pm:1477 #, c-format msgid "Remote host name" msgstr "Nome da máquina remota" #: printer/printerdrake.pm:1478 #, c-format msgid "Remote printer name" msgstr "Nome da impresora remota" #: printer/printerdrake.pm:1481 #, fuzzy, c-format msgid "Remote host name missing!" msgstr "Nome do servidor" #: printer/printerdrake.pm:1485 #, fuzzy, c-format msgid "Remote printer name missing!" msgstr "Nome do servidor" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 standalone/drakTermServ:445 #: standalone/drakTermServ:740 standalone/drakTermServ:757 #: standalone/drakTermServ:1469 standalone/drakTermServ:1477 #: standalone/drakTermServ:1489 standalone/drakbackup:512 #: standalone/drakbackup:618 standalone/drakbackup:653 #: standalone/drakbackup:773 standalone/drakroam:385 standalone/harddrake2:261 #, c-format msgid "Information" msgstr "Información" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 #, c-format msgid "Detected model: %s %s" msgstr "Modelo detectado: %s %s" #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Scanning network..." msgstr "Examinando a rede..." #: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", impresora \"%s\" no servidor \"%s\"" #: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Impresora \"%s\" no servidor \"%s\"" #: printer/printerdrake.pm:1655 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Opcións de Impresora SMB (Windows 9x/NT)" #: printer/printerdrake.pm:1656 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Para imprimir nunha impresora SMB, cómpre fornecer o nome de máquina SMB " "(Nota! pode ser diferente do seu nome de máquina TCP/IP!) e posiblemente o " "enderezo IP do servidor de impresión, ademais do nome de recurso compartido " "da impresora á que quere acceder así coma calquera nome de usuario, " "información do grupo de traballo ou contrasinal que for necesario." #: printer/printerdrake.pm:1657 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Se a impresora desexada se detectou automáticamente, simplemente escóllaa " "da lista e despois engada o nome de usuario, o contrasinal, e/ou o grupo de " "traballo se for necesario." #: printer/printerdrake.pm:1659 #, c-format msgid "SMB server host" msgstr "Servidor de SMB" #: printer/printerdrake.pm:1660 #, c-format msgid "SMB server IP" msgstr "IP do servidor SMB" #: printer/printerdrake.pm:1661 #, c-format msgid "Share name" msgstr "Nome de recurso compartido" #: printer/printerdrake.pm:1664 #, c-format msgid "Workgroup" msgstr "Grupo de traballo" #: printer/printerdrake.pm:1666 #, c-format msgid "Auto-detected" msgstr "Detectada automáticamente" #: printer/printerdrake.pm:1676 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Cómpre proporcionar o nome do servidor ou o seu IP!" #: printer/printerdrake.pm:1680 #, c-format msgid "Samba share name missing!" msgstr "" #: printer/printerdrake.pm:1686 #, c-format msgid "SECURITY WARNING!" msgstr "¡ADVERTENCIA DE SEGURIDADE!" #: printer/printerdrake.pm:1687 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: printer/printerdrake.pm:1697 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Configure o seu servidor Windows para facer que a impresora estea dispoñible " "baixo o protocolo IPP e configure a impresión dende esta máquina co tipo de " "conexión \"%s\" en Printerdrake.\n" "\n" #: printer/printerdrake.pm:1700 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Conecte a impresora a un servidor Linux e déixelle ás súas máquinas Windows " "conectarse a el coma cliente.\n" "\n" "Desexa continuar configurando esta impresora como está facendo agora?" #: printer/printerdrake.pm:1779 #, c-format msgid "NetWare Printer Options" msgstr "Opcións de Impresora NetWare" #: printer/printerdrake.pm:1780 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Para imprimir nunha impresora NetWare, cómpre proporcionar o nome do " "servidor de impresión NetWare (Nota! pode ser diferente do nome de máquina " "TCP/IP!) ademais do nome da cola de impresión da impresora á que desexa " "acceder así coma calquera nome de usuario ou contrasinal que for necesario." #: printer/printerdrake.pm:1781 #, c-format msgid "Printer Server" msgstr "Servidor de Impresión" #: printer/printerdrake.pm:1782 #, c-format msgid "Print Queue Name" msgstr "Nome da Cola de Impresión" #: printer/printerdrake.pm:1787 #, c-format msgid "NCP server name missing!" msgstr "" #: printer/printerdrake.pm:1791 #, c-format msgid "NCP queue name missing!" msgstr "" #: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888 #, c-format msgid ", host \"%s\", port %s" msgstr ", máquina \"%s\", porto %s" #: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891 #, c-format msgid "Host \"%s\", port %s" msgstr "Máquina \"%s\", porto %s" #: printer/printerdrake.pm:1913 #, c-format msgid "TCP/Socket Printer Options" msgstr "Opcións da Impresora TCP/Socket" #: printer/printerdrake.pm:1915 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Escolla unha das impresoras detectadas automáticamente da lista ou introduza " "o nome de máquina ou IP e opcionalmente o número de porto (o predeterminado " "é 9100) nos campos de entrada." #: printer/printerdrake.pm:1916 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Para imprimir nunha impresora TCP ou de socket, ten que fornecer o nome de " "máquina ou o IP da impresora e opcionalmente o número do porto (por defecto " "é 9100). Nos servidores HP JetDirect o número de porto normalmente é 9100, " "noutros servidores pode variar. Mire o manual do seu hardware." #: printer/printerdrake.pm:1920 #, fuzzy, c-format msgid "Printer host name or IP missing!" msgstr "Servidor de impresión" #: printer/printerdrake.pm:1949 #, c-format msgid "Printer host name or IP" msgstr "Nome de máquina ou IP da impresora" #: printer/printerdrake.pm:2012 #, c-format msgid "Refreshing Device URI list..." msgstr "Actualizando a lista de URIs dos Dispositivos..." #: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017 #, c-format msgid "Printer Device URI" msgstr "URI do Dispositivo de Impresión" #: printer/printerdrake.pm:2016 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: printer/printerdrake.pm:2042 #, c-format msgid "A valid URI must be entered!" msgstr "Débese introducir un URI válido!" #: printer/printerdrake.pm:2147 #, c-format msgid "Pipe into command" msgstr "" #: printer/printerdrake.pm:2148 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:2149 #, c-format msgid "Command line" msgstr "Liña de comandos" #: printer/printerdrake.pm:2153 #, c-format msgid "A command line must be entered!" msgstr "" #: printer/printerdrake.pm:2192 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2194 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" "Para acceder a estas funcións extra na súa impresora HP, debe configurarse " "co software apropiado: " #: printer/printerdrake.pm:2195 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2196 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2198 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "Cal é a súa elección (elixa \"Ningún\" para impresoras non HP)? " #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232 #: printer/printerdrake.pm:2258 #, c-format msgid "HPLIP" msgstr "HPLIP" #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202 #: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364 #: printer/printerdrake.pm:2375 #, c-format msgid "HPOJ" msgstr "HPOJ" #: printer/printerdrake.pm:2207 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358 #, c-format msgid "Installing %s package..." msgstr "Instalando o paquete %s..." #: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365 #, c-format msgid "Only printing will be possible on the %s." msgstr "Só será posible imprimir en %s." #: printer/printerdrake.pm:2248 #, fuzzy, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "" "Non foi posible crear o directorio do usuario de configuración de gnome `%" "s': %s\n" #: printer/printerdrake.pm:2250 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "Elimine o ficheiro a man e reinicie HPOJ." #: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375 #, c-format msgid "Checking device and configuring %s..." msgstr "Comprobando o dispositivo e configurando %s..." #: printer/printerdrake.pm:2277 #, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "Que impresora desexa configurar con HPLIP?" #: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419 #, c-format msgid "Installing SANE packages..." msgstr "Instalando os paquetes SANE..." #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432 #, c-format msgid "Scanning on the %s will not be possible." msgstr "Non será posible dixitalizar en %s." #: printer/printerdrake.pm:2334 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2459 #, c-format msgid "Installing mtools packages..." msgstr "Instalando os paquetes mtools..." #: printer/printerdrake.pm:2467 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2483 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Dixitalizando no seu dispositivo multifunción HP" #: printer/printerdrake.pm:2492 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:2509 #, c-format msgid "Configuring device..." msgstr "Configurando o dispositivo..." #: printer/printerdrake.pm:2543 #, c-format msgid "Making printer port available for CUPS..." msgstr "Facendo que o porto da impresora estea dispoñible para CUPS..." #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805 #: printer/printerdrake.pm:2949 #, c-format msgid "Reading printer database..." msgstr "Lendo a base de datos da impresora..." #: printer/printerdrake.pm:2763 #, c-format msgid "Enter Printer Name and Comments" msgstr "Introduza o Nome da Impresora e os Comentarios" #: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "O nome da impresora debe conter só letras, números e o guión baixo" #: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "A impresora \"%s\" xa existe,\n" "¿desexa sobrescribi-la súa configuración?" #: printer/printerdrake.pm:2780 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" "O nome da impresora \"%s\" ten máis de 12 caracteres o que pode facer que a " "impresora non estea dispoñible dende os clientes Windows. Desexa usar este " "nome?" #: printer/printerdrake.pm:2789 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Tódalas impresoras necesitan un nome (por exemplo \"Impresora\"). Os campos " "de Descrición e Localización non son imprescindibles. Son comentarios para " "os usuario." #: printer/printerdrake.pm:2790 #, c-format msgid "Name of printer" msgstr "Nome da impresora" #: printer/printerdrake.pm:2791 standalone/drakconnect:603 #: standalone/harddrake2:38 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "Descrición" #: printer/printerdrake.pm:2792 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "Localización" #: printer/printerdrake.pm:2810 #, c-format msgid "Preparing printer database..." msgstr "Preparando a base de datos da impresora..." #: printer/printerdrake.pm:2927 #, c-format msgid "Your printer model" msgstr "Modelo de impresora" #: printer/printerdrake.pm:2928 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936 #, c-format msgid "The model is correct" msgstr "O modelo é correcto" #: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935 #: printer/printerdrake.pm:2938 #, c-format msgid "Select model manually" msgstr "Seleccione o modelo a man" #: printer/printerdrake.pm:2962 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: printer/printerdrake.pm:2981 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:3013 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" "Cada impresora PostScript distribuese cun ficheiro PPD que describe as " "opcións e as características da impresora." #: printer/printerdrake.pm:3014 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" "Este ficheiro está normalmente no CD dos drivers para Windows e Mac que se " "distribúe ca impresora." #: printer/printerdrake.pm:3015 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "Tamén pode atopa-los ficheiros PPD nos sitios web dos fabricantes." #: printer/printerdrake.pm:3016 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" "Se ten o Windows instalado, tamén pode atopa-lo ficheiro PPD na partición de " "Windows." #: printer/printerdrake.pm:3017 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:3018 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:3020 #, c-format msgid "Install PPD file from" msgstr "Instala-lo ficheiro PPD dende" #: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "Disquete" #: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "Outro sitio" #: printer/printerdrake.pm:3039 #, c-format msgid "Select PPD file" msgstr "Seleccione o ficheiro PPD" #: printer/printerdrake.pm:3043 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "¡O ficheiro PPD %s non existe ou non se pode ler!" #: printer/printerdrake.pm:3049 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "O ficheiro PPD %s non cumpre as especificacións PPD!" #: printer/printerdrake.pm:3060 #, c-format msgid "Installing PPD file..." msgstr "Instalando o ficheiro PPD..." #: printer/printerdrake.pm:3178 #, c-format msgid "OKI winprinter configuration" msgstr "Configuración de OKI winprinter" #: printer/printerdrake.pm:3179 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "Configuración de Internet" #: printer/printerdrake.pm:3205 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: printer/printerdrake.pm:3235 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: printer/printerdrake.pm:3245 #, c-format msgid "Lexmark X125 configuration" msgstr "Configuración de Lexmark X125" #: printer/printerdrake.pm:3246 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" #: printer/printerdrake.pm:3268 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Configuración de Samsung ML/QL-85G" #: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" #: printer/printerdrake.pm:3295 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "Configuración de Canon LBP-460/660" #: printer/printerdrake.pm:3314 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:3464 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: printer/printerdrake.pm:3589 #, c-format msgid "Printer default settings" msgstr "Preferencias por omisión da impresora" #: printer/printerdrake.pm:3596 #, c-format msgid "Option %s must be an integer number!" msgstr "¡A opción %s debe ser un número enteiro!" #: printer/printerdrake.pm:3600 #, c-format msgid "Option %s must be a number!" msgstr "¡A opción %s debe ser un número!" #: printer/printerdrake.pm:3604 #, c-format msgid "Option %s out of range!" msgstr "" #: printer/printerdrake.pm:3656 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "¿Desexa que establecer esta impresora (\"%s\")\n" "coma a impresora por defecto?" #: printer/printerdrake.pm:3672 #, c-format msgid "Test pages" msgstr "Páxinas de proba" #: printer/printerdrake.pm:3673 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: printer/printerdrake.pm:3677 #, c-format msgid "No test pages" msgstr "Non hai páxinas de proba" #: printer/printerdrake.pm:3678 #, c-format msgid "Print" msgstr "Imprimir" #: printer/printerdrake.pm:3703 #, c-format msgid "Standard test page" msgstr "Páxina estándar de proba" #: printer/printerdrake.pm:3706 #, c-format msgid "Alternative test page (Letter)" msgstr "Páxina de proba alternativa (Letra)" #: printer/printerdrake.pm:3709 #, c-format msgid "Alternative test page (A4)" msgstr "Páxina de proba alternativa (A4)" #: printer/printerdrake.pm:3711 #, c-format msgid "Photo test page" msgstr "Páxina de proba con foto" #: printer/printerdrake.pm:3715 #, c-format msgid "Do not print any test page" msgstr "Non imprimir ningunha páxina de proba" #: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907 #, c-format msgid "Printing test page(s)..." msgstr "Imprimindo páxina(s) de proba..." #: printer/printerdrake.pm:3743 #, fuzzy, c-format msgid "Skipping photo test page." msgstr "Imprimindo páxina(s) de proba..." #: printer/printerdrake.pm:3760 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "A(s) páxina(s) de proba enviáronse á impresora.\n" "Pode que lle leve un pouco ata que a impresora comece.\n" "Estado da impresión:\n" "%s\n" "\n" #: printer/printerdrake.pm:3764 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "A(s) páxina(s) de proba enviáronse á impresora.\n" "Pode que lle leve un pouco ata que a impresora comece.\n" #: printer/printerdrake.pm:3774 #, c-format msgid "Did it work properly?" msgstr "¿Traballa de xeito correcto?" #: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175 #, c-format msgid "Raw printer" msgstr "Impresora raw" #: printer/printerdrake.pm:3836 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Para imprimir un ficheiro dende a liña de comandos (ventá de terminal) pode " "usar o comando \"%s \" ou unha ferramenta de impresión gráfica: " "\"xpp \" ou \"kprinter \". As ferramentas gráficas " "permítenlle elixir a impresora e modificar a configuración de maneira " "sinxela.\n" #: printer/printerdrake.pm:3838 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Estes comandos tamén pode usalos no campo \"Comando de impresión\" dos " "diálogos de impresión de moitas aplicacións, pero aquí non proporcione o " "nome do ficheiro a imprimir porque xa o proporciona a aplicación.\n" #: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858 #: printer/printerdrake.pm:3868 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "O comando \"%s\" tamén permite modificar a configuración para un traballo de " "impresión. Simplemente engada as opcións desexadas á liña de comandos, p.ex. " "\"%s \". " #: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: printer/printerdrake.pm:3848 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Aqui ten unha lista das opcións de impresión dispoñibles para a impresora " "actual:\n" "\n" #: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Para imprimir un ficheiro dende a liña de comandos (ventá de terminal) use o " "comando \"%s \".\n" #: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865 #: printer/printerdrake.pm:3875 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Para obter unha lista das opcións de impresión dispoñibles para a impresora " "actual prema o botón \"Lista de opcións de impresión\"." #: printer/printerdrake.pm:3873 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Para imprimir un ficheiro dende a liña de comandos (ventá de termianl) use o " "comando\"%s \" ou \"%s \".\n" #: printer/printerdrake.pm:3877 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: printer/printerdrake.pm:3881 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Os comandos \"%s\" e \"%s\" tamén permiten modificar a configuración para un " "traballo de impresión. Simplemente engada as opcións desexadas á liña de " "comandos, p.ex. \"%s \". \n" #: printer/printerdrake.pm:3891 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Desactivando a rede" #: printer/printerdrake.pm:3892 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Imprimindo/Dixitalizando en \"%s\"" #: printer/printerdrake.pm:3894 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Desactivando a rede" #: printer/printerdrake.pm:3896 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Usando/Mantendo a impresora \"%s\"" #: printer/printerdrake.pm:3897 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Imprimindo na impresora \"%s\"" #: printer/printerdrake.pm:3903 #, c-format msgid "Print option list" msgstr "Lista de opcións de impresión" #: printer/printerdrake.pm:3925 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3928 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" "O escáner da súa impresora pode usarse co software SANE, por exemplo Kooka " "ou XSane (Ámbolos dous no menú Multimedia/Gráficos). " #: printer/printerdrake.pm:3929 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share " "your scanner on the network.\n" "\n" msgstr "" "Execute Scannerdrake (Hardware/Escáner no Centro de Control de " "Mandrakelinux) para compartir o seu escáner na rede.\n" "\n" #: printer/printerdrake.pm:3933 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" "Pódese acceder ós lectores de tarxetas de memoria da súa impresora coma se " "foran dispositivos USB de almacenamento masivo normais." #: printer/printerdrake.pm:3934 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" "Despois de inserir unha tarxeta debería aparecer no escritorio unha icona " "dun disco duro para acceder á tarxeta.\n" "\n" #: printer/printerdrake.pm:3936 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3937 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" "Teña en conta que isto é moi lento, ler imaxes dende unha cámara ou un " "lector de tarxetas USB é normalmente máis rápido.\n" "\n" #: printer/printerdrake.pm:3940 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3941 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3942 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3943 #, fuzzy, c-format msgid " - Print head alignment\n" msgstr "Xestión de Impresoras\n" #: printer/printerdrake.pm:3944 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Configuración da cor" #: printer/printerdrake.pm:3959 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" #: printer/printerdrake.pm:3985 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055 #: printer/printerdrake.pm:4090 #, c-format msgid "Transfer printer configuration" msgstr "Transferi-la configuración da impresora" #: printer/printerdrake.pm:4029 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: printer/printerdrake.pm:4032 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:4034 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ só soporta as impresoras locais, as impresoras LPD remotas, e as " "impresoras Socket/TCP.\n" #: printer/printerdrake.pm:4036 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD e LPRng non soportan as impresoras IPP.\n" #: printer/printerdrake.pm:4038 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: printer/printerdrake.pm:4039 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: printer/printerdrake.pm:4040 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Marque as impresoras que desexa transferir e prema \n" "\"Transferir\"." #: printer/printerdrake.pm:4043 #, c-format msgid "Do not transfer printers" msgstr "Non transferir impresoras" #: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060 #, c-format msgid "Transfer" msgstr "Transferir" #: printer/printerdrake.pm:4056 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: printer/printerdrake.pm:4077 #, c-format msgid "New printer name" msgstr "Novo nome de impresora" #: printer/printerdrake.pm:4080 #, c-format msgid "Transferring %s..." msgstr "Transferindo %s..." #: printer/printerdrake.pm:4091 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: printer/printerdrake.pm:4101 #, c-format msgid "Refreshing printer data..." msgstr "Actualizando os datos da impresora..." #: printer/printerdrake.pm:4111 #, c-format msgid "Starting network..." msgstr "Iniciando a rede..." #: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159 #: printer/printerdrake.pm:4161 #, c-format msgid "Configure the network now" msgstr "Configura-la rede agora" #: printer/printerdrake.pm:4156 #, c-format msgid "Network functionality not configured" msgstr "Funcionalidade de rede non configurada" #: printer/printerdrake.pm:4157 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Vai configurar unha impresora remota. Para isto cómpre un acceso á rede que " "funcione, pero a súa rede ainda non está configurada. Se continúa sen " "configurar a rede, non poderá usar a impresora que está configurando agora. " "Que desexa facer?" #: printer/printerdrake.pm:4160 #, c-format msgid "Go on without configuring the network" msgstr "Continuar sen configura-la rede" #: printer/printerdrake.pm:4195 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "A configuración da rede feita durante a instalación non se pode iniciar " "agora. Verifique se a rede é accesible despois de arrincar o sistema e " "corrixa a configuración usando a sección \"Rede & Internet\"/\"Conexión\" do " "Centro de Control de %s, e despois configure a impresora, usando tamén a " "sección \"Hardware\"/\"Impresoras\" do Centro de Control de %s" #: printer/printerdrake.pm:4196 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "O acceso é rede non está funcionando e non pode iniciarse. Verifique a " "configuración e o hardware. Despois intente configurar outra vez a impresora " "remota." #: printer/printerdrake.pm:4206 #, c-format msgid "Restarting printing system..." msgstr "Reiniciando o sistema de impresión..." #: printer/printerdrake.pm:4237 #, c-format msgid "high" msgstr "alto" #: printer/printerdrake.pm:4237 #, c-format msgid "paranoid" msgstr "paranoico" #: printer/printerdrake.pm:4239 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Instalando un sistema de impresión cun nivel de seguridade %s" #: printer/printerdrake.pm:4240 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: printer/printerdrake.pm:4276 #, c-format msgid "Starting the printing system at boot time" msgstr "Inicia-lo sistema de impresión ó inicia-lo sistema" #: printer/printerdrake.pm:4277 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: printer/printerdrake.pm:4300 #, c-format msgid "Checking installed software..." msgstr "Comprobando o software instalado..." #: printer/printerdrake.pm:4306 #, c-format msgid "Removing %s..." msgstr "Eliminando %s ..." #: printer/printerdrake.pm:4310 #, c-format msgid "Could not remove the %s printing system!" msgstr "¡Non se pode elimina-lo sistema de impresión %s!" #: printer/printerdrake.pm:4326 #, c-format msgid "Installing %s..." msgstr "Instalando %s ..." #: printer/printerdrake.pm:4330 #, c-format msgid "Could not install the %s printing system!" msgstr "¡Non se pode instala-lo sistema de impresión %s!" #: printer/printerdrake.pm:4398 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4400 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" "Introduza o nome de máquina ou IP do servidor CUPS e clique Aceptar se " "desexa usar este modo, senón clique \"Saír\"." #: printer/printerdrake.pm:4414 #, c-format msgid "Name or IP of remote server:" msgstr "Nome ou IP do servidor remoto:" #: printer/printerdrake.pm:4434 #, c-format msgid "Setting Default Printer..." msgstr "Establecendo Impresora por Defecto..." #: printer/printerdrake.pm:4454 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Sistema de impresión CUPS local ou servidor CUPS remoto?" #: printer/printerdrake.pm:4455 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "O sistema de impresión CUPS pode usarse de dúas maneiras:" #: printer/printerdrake.pm:4457 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "1. O sistema de impresión CUPS pode executarse de xeito local. " #: printer/printerdrake.pm:4458 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" "Despois poderanse usar as impresoras conectadas localmente e descubriranse " "automáticamente as impresoras remotas noutros servidores CUPS da mesma rede. " #: printer/printerdrake.pm:4459 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4461 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" "2. Tódalas solicitudes de impresión envíanse inmediatamente a un servidor " "CUPS remoto. " #: printer/printerdrake.pm:4462 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4463 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4465 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "Como debe estar configurado CUPS na súa máquina?" #: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484 #: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "Servidor remoto, especifique o Nome ou IP aquí:" #: printer/printerdrake.pm:4483 #, c-format msgid "Local CUPS printing system" msgstr "Sistema de impresión CUPS local" #: printer/printerdrake.pm:4522 #, fuzzy, c-format msgid "Select Printer Spooler" msgstr "Selección da conexión da impresora" #: printer/printerdrake.pm:4523 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Que sistema de impresión (spooler) desexa usar?" #: printer/printerdrake.pm:4572 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "¡Fallo ó configura-la impresora \"%s\"!" #: printer/printerdrake.pm:4587 #, c-format msgid "Installing Foomatic..." msgstr "Instalando Foomatic..." #: printer/printerdrake.pm:4593 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "Non se puideron instalar os paquetes %s, non se pode iniciar %s!" #: printer/printerdrake.pm:4785 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "As seguintes impresoras están configuradas. Clique dúas veces nunha " "impresora para cambia-las súas preferencias; para facela a impresora por " "defecto; ou para ve-la súa información. " #: printer/printerdrake.pm:4815 #, c-format msgid "Display all available remote CUPS printers" msgstr "Amosar tódalas impresoras remotas CUPS dispoñibles" #: printer/printerdrake.pm:4816 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Actualiza-la lista de impresoras (para amosar tódalas impresoras remotas " "CUPS dispoñibles)" #: printer/printerdrake.pm:4827 #, c-format msgid "CUPS configuration" msgstr "Configuración de CUPS" #: printer/printerdrake.pm:4839 #, c-format msgid "Change the printing system" msgstr "Cambia-lo sistema de impresión" #: printer/printerdrake.pm:4848 #, c-format msgid "Normal Mode" msgstr "Modo Normal" #: printer/printerdrake.pm:4849 #, c-format msgid "Expert Mode" msgstr "Modo Experto" #: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176 #: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264 #, c-format msgid "Printer options" msgstr "Opcións da impresora" #: printer/printerdrake.pm:5154 #, c-format msgid "Modify printer configuration" msgstr "Modifica-la configuración da impresora" #: printer/printerdrake.pm:5156 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Impresora %s%s\n" "¿Qué desexa modificar nesta impresora?" #: printer/printerdrake.pm:5161 #, c-format msgid "This printer is disabled" msgstr "Esta impresora está deshabilitada" #: printer/printerdrake.pm:5163 #, c-format msgid "Do it!" msgstr "¡Faino!" #: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223 #, c-format msgid "Printer connection type" msgstr "Tipo de conexión da impresora" #: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229 #, c-format msgid "Printer name, description, location" msgstr "Nome da impresora, descrición, localización" #: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Fabricante da impresora, modelo, controlador" #: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249 #, c-format msgid "Printer manufacturer, model" msgstr "Fabricante da impresora, modelo" #: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259 #, c-format msgid "Set this printer as the default" msgstr "Establecer esta impresora coma a impresora por defecto" #: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265 #: printer/printerdrake.pm:5267 #, c-format msgid "Enable Printer" msgstr "Activar Impresora" #: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270 #: printer/printerdrake.pm:5272 #, c-format msgid "Disable Printer" msgstr "Desactivar Impresora" #: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275 #, c-format msgid "Print test pages" msgstr "Imprimi-la(s) páxina(s) de proba" #: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277 #, c-format msgid "Learn how to use this printer" msgstr "Aprender cómo usar esta impresora" #: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279 #, c-format msgid "Remove printer" msgstr "Eliminar impresora" #: printer/printerdrake.pm:5237 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Eliminando a impresora vella \"%s\"..." #: printer/printerdrake.pm:5268 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "A impresora \"%s\" está activada." #: printer/printerdrake.pm:5273 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "A impresora \"%s\" está desactivada." #: printer/printerdrake.pm:5310 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "¿Desexa elimina-la impresora \"%s\"" #: printer/printerdrake.pm:5314 #, c-format msgid "Removing printer \"%s\"..." msgstr "Eliminando a impresora \"%s\"..." #: printer/printerdrake.pm:5338 #, c-format msgid "Default printer" msgstr "Impresora por defecto" #: printer/printerdrake.pm:5339 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "A impresora por defecto é \"%s\"." #: raid.pm:42 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Non se puido engadir unha partición ó RAID _formatado_ %s" #: raid.pm:145 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Non hai particións dabondo para o nivel RAID %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "¡Non se puido crea-lo directorio /usr/share/sane/firmware!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "¡Non se puido crea-lo enlace /usr/share/sane/%s!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" "¡Non se puido copia-lo ficheiro de firmware %s a /usr/share/sane/firmware!" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" "Non se puideron instalar os paquetes necesarios para compartir os seus " "escáners." #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" "Os seus escáners non estarán dispoñibles para os usuarios que non sexan root" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Permitir/Prohibir o login automático." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Permitir/Prohibir o reinicio ó usuario da consola." #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "Permitir/Prohibir login remoto ó usuario root." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Permitir/Prohibir login directo do usuario root." #: security/help.pm:33 #, fuzzy, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Permitir/Prohibir ve-la lista de usuarios do sistema nos xestores " "(kdm e gdm)." #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Permitir/Prohibir as conexións X:\n" "\n" "- TODAS (permitir tódalas conexións),\n" "\n" "- LOCAIS (só se permiten as conexións dende a máquina local),\n" "\n" "- NINGUNHA (sen conexión)." #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "O argumento especifica se os clientes están autorizados a\n" "conectarse ó servidor X dende a rede polo porto tcp 6000." #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Activar/Desactivar crontab e at para os usuarios.\n" "\n" "Poña os usuarios ós que se lles permite usalos en /etc/cron.allow e\n" "/etc/at.allow (vexa man at(1) e crontab(1))." #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "Alertas de Seguridade:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "Activar/Desactivar libsafe se se atopa libsafe no sistema." #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" " Habilitar su só dende os membros do grupo wheel ou permitir su dende " "calquera usuario." #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "Usar contrasinal para autenticar ós usuarios." #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr " Activar/Deshabilitar a comprobación diaria de seguridade." #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Configurar a lonxitude do historial de contrasinais para previr a " "reutilización de contrasinais." #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Establece-la lonxitude mínima, o número mínimo de díxitos e o número mínimo " "de letras maiúsculas do contrasinal." #: security/help.pm:108 #, fuzzy, c-format msgid "Set the root umask." msgstr "Sen contrasinal" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "se está a si, compróbanse os portos abertos." #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "se está a si, compróbanse os permisos dos ficheiros do directorio persoal do " "usuario" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "se está a si, comprobarase se os dispositivos de rede están en modo " "promiscuo." #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "se está a si, executaranse as comprobacións de seguridade diariamente." #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "se está a si, comproba contrasinais baleiros en /etc/shadow." #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "se está a si, informa de ficheiros sen dono." #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "se está a si, comprobaranse os ficheiros/directorios escribibles por todos." #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "Non enviar correos-e se non hai nada do que avisar" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "se está a si, devolve o resultado da comprobación a syslog." #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "se está a si, devolve o resultado da comprobación a tty." #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Establece-lo tamaño do historial de comandos da shell. O valor -1 significa " "sen límite." #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, fuzzy, c-format msgid "Set the user umask." msgstr "Usuarios" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* existe" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Permitirlle o login remoto ó usuario root" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "Permitir conexións X Window" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Autorizar conexións TCP a X Window" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:24 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "Configurar servicios" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "Activar \"crontab\" e \"at\" para os usuarios" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Activar libsafe se se atopa no sistema" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "Habilita su só dende membros do grupo wheel ou para calquera usuario" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Usar contrasinais para autenticar os usuarios" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "Comprobación de seguridade diaria" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: security/l10n.pm:37 #, fuzzy, c-format msgid "No password aging for" msgstr "Sen contrasinal" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Lonxitude do historial de contrasinais" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" "Lonxitude mínima e número de díxitos e letras maiúsculas do contrasinal" #: security/l10n.pm:41 #, fuzzy, c-format msgid "Root umask" msgstr "Sen contrasinal" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Tamaño do historial da shell" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "" #: security/l10n.pm:44 #, fuzzy, c-format msgid "User umask" msgstr "Usuarios" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Comproba-los portos abertos" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "" "Verificar os permisos dos ficheiros nos directorios persoais dos usuarios" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Comprobar se os dispositivos de rede están en modo promiscuo" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Executar as comprobacións de seguridade diariamente" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Comproba contrasinais baleiros en /etc/shadow" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "Informar dos ficheiros sen propietario" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "Comprobar os ficheiros/directorios escribibles por tods" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "Non enviar correos-e cando non cómpre" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "Enviar o resultado da comprobación por correo" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "Realizar algunhas comprobacións sobre a base de datos rpm" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Enviar o resultado da comprobación a syslog" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "Enviar o resultado da comprobación a unha tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Benvid@ A Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Pobre" #: security/level.pm:13 #, c-format msgid "High" msgstr "Alto" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Moi Alto" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Paranoico" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Este nivel hai que usalo con coidado. Fai que o seu sistema sexa máis\n" "sinxelo de utilizar, pero é moi sensible: non debe usarse nunha máquina\n" "conectada a outras ou á Internet. Non hai contrasinais de acceso." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Os contrasinais están activados, pero o uso como ordenador de rede aínda\n" "non se recomenda." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Esta é a seguridade recomendada para un ordenador usado para conectar\n" "á Internet como cliente." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Xa hai algunhas restriccións, e executaranse máis comprobacións\n" "automáticas cada noite." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Con este nivel de seguridade, é posible usar este sistema coma servidor.\n" "A seguridade é agora alta dabondo para usa-lo sistema coma un servidor\n" "que acepta conexións de múltiples clientes.\n" "Nota: se a súa máquina só é un cliente da Internet, debe escoller un nivel " "menor." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Este é similar ó nivel anterior, pero agora o sistema está completamente\n" "pechado. As características de seguridade están ó máximo nivel." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "Opcións Básicas de DrakSec" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Escolla o nivel de seguridade" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Nivel de seguridade" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Usar libsafe para os servidores" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "Administrador de Seguridade (login ou correo-e)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Executa-lo sistema de son ALSA (Advanced Linux Sound Architecture)" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron, un xestor de comandos periódicos." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd úsase para monitoriza-lo estado da batería e rexistralo a través do\n" "syslog. Tamén pode usarse para apaga-la máquina cando a batería está baixa." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Executa os comandos programados polo comando at á hora indicada\n" "cando se executou at, e executa comandos de lotes cando a carga media\n" "é baixa dabondo." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "O cron é un programa estándar de UNIX que executa programas\n" "especificados polo usuario en datas periódicas programadas. O vixie\n" "cron engade algunhas características ó cron básico de UNIX, incluindo\n" "mellor seguridade e opcións de configuración máis potentes." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "FAM é un daemon de monitorización de ficheiros. Úsase para obter informes " "cando os ficheiros cambian.\n" "Úsano o GNOME e o KDE" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM engade soporte para o rato ás aplicacións de texto de Linux, coma\n" "o Midnight Commander. Tamén permite operacións de cortar e pegar co\n" "rato na consola, e inclúe soporte para menús na consola." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake fai probas de hardware, e opcionalmente configura o\n" "hardware novo/cambiado." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache é un servidor de World Wide Web. Úsase para servir ficheiros\n" "HTML e CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "O daemon superservidor de internet (normalmente chamado inetd) lanza\n" "varios outros servicios de internet cando se precisan. É o responsable de\n" "iniciar moitos servicios, incluíndo telnet, ftp, rsh, e rlogin. Desactivando " "o\n" "inetd desactívanse tódolos servicios de internet dos que é responsable." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Este paquete carga o mapa de teclado seleccionado en\n" "/etc/sysconfig/keyboard. Este pode escollerse usando a utilidade\n" "kbdconfig. Debería deixar isto activado para a maioría dos sistemas." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Configuración e detección automática do hardware ó arrincar." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Algunhas veces, Linuxconf levará a cabo varias tarefas ó arrincar para\n" "mante-la configuración do sistema." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd é o daemon de impresión requirido para que o lpr funcione\n" "correctamente. É basicamente un servidor que distribúe os traballos de\n" "impresión á(s) impresora(s)." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) é un Servidor de Nomes de Dominio (DNS), que se\n" "emprega para converte-los nomes das máquinas en enderezos IP." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Monta e desmonta tódolos puntos de montaxe de Sistemas de\n" "Ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Activa/desactiva tódalas interfaces de rede configuradas para\n" "seren activadas no arrinque." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS é un protocolo popular para compartir ficheiros a través de redes TCP/" "IP.\n" "Este servicio fornece funcionalidade de servidor NFS, que se configura " "usando\n" "o ficheiro /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS é un protocolo popular para compartir ficheiros a través de\n" "redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "O soporte PCMCIA é normalmente para cousas coma ethernet e módems\n" "en portátiles. Non será arrincado ata que non estea configurado de xeito\n" "que non haxa problemas ó telo instalado en máquinas que non o precisan." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "O portmapper xestiona as conexións RPC, que son usadas por protocolos\n" "coma NFS e NIS. O servidor portmap ten que estar a se executar en\n" "máquinas que actúan de servidores de protocolos que usan o mecanismo\n" "RPC." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix é un Axente de Transporte de Correo (MTA), que é o programa\n" "que move o correo dunha máquina a outra." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Garda e restaura o estado da entropía do sistema para unha xeración\n" "de números aleatorios de calidade." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "O daemon routed permite actualizacións automáticas da táboa de\n" "encamiñamento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n" "en redes pequenas, outros protocolos máis complexos de encamiñamento\n" "precísanse para redes máis complexas." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "O protocolo rstat permite ós usuarios dunha rede obter\n" "métricas de rendemento de calquera máquina desa rede." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "O protocolo rusers permite ós usuarios dunha rede identificar quen\n" "está conectado noutras máquinas activas." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "O protocolo rwho permite que os usuarios remotos obteñan unha lista de\n" "tódolos usuarios conectados a unha máquina que está a executar o\n" "daemon rwho (similar ó finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Executa-lo sistema se son na súa máquina" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "O syslog é o método que usan moitos daemons para rexistrar mensaxes\n" "nos diversos ficheiros de rexistro do sistema. É unha boa idea executar\n" "sempre o syslog." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Carga-los drivers para os dispositivos USB." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "" "Inicia o Servidor de Fontes X (isto é obrigatorio para poder executar Xorg)." #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema" #: services.pm:127 #, c-format msgid "Printing" msgstr "Imprimindo" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Compartimento de ficheiros" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Administración Remota" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Servidor de Bases de Datos" #: services.pm:209 #, c-format msgid "running" msgstr "executándose" #: services.pm:209 #, c-format msgid "stopped" msgstr "parado" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Servicios e daemons" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Non hai información adicional\n" "sobre este servicio, desculpe." #: services.pm:224 ugtk2.pm:1019 #, c-format msgid "Info" msgstr "Info" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "Iniciar cando sexa solicitado" #: services.pm:227 #, c-format msgid "On boot" msgstr "Ó arrincar" #: services.pm:244 standalone/drakroam:181 #, c-format msgid "Start" msgstr "Iniciar" #: services.pm:244 standalone/drakroam:182 #, c-format msgid "Stop" msgstr "Parar" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "¿Que é Mandrakelinux?" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandrakelinux!" msgstr "¡Benvid@ a Mandrakelinux!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandrakelinux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" "Mandrakelinux é unha distribución de Linux que consta do núcleo do " "sistema, chamado sistema operativo (baseado no kernel Linux) xunto " "cunha chea de aplicacións satisfan tódalas necesidades en que poida " "pensar." #: share/advertising/01.pl:19 #, c-format msgid "" "Mandrakelinux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" "Mandrakelinux é a distribución de Linux máis amigable hoxe en día. " "Tamén é unha das distribucións de Linux máis usadas en todo o mundo!" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "Código Aberto" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "¡Benvid@ ó mundo do Código Aberto!" #: share/advertising/02.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandrakesoft's " "team of developers and the worldwide community of Mandrakelinux " "contributors." msgstr "" "Mandrakelinux comprométese co Modelo de Código Aberto. Isto significa que " "esta nova versión é o resultado da colaboración entre o equipo de " "desenvolvedores de Mandrakesoft e a comunidade mundial de " "contribuíntes de Mandrakelinux." #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" "Queremos darlle as gracias a tódolos que participaron no " "desenvolvemento desta última versión." #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "A GPL" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the " "Mandrakelinux tools are licensed under the General Public License." msgstr "" "A maioría do software incluido nesta distribución e tódalas ferramentas de " "Mandrakelinux usan a General Public License." #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" "A GPL está no fondo do modelo do código aberto; garántelle a todo o mundo a " "liberdade para usar, estudiar, distribuír e mellorar o software de " "calquera forma que queiran, ca condición de que fagan que os resultados " "estean dispoñibles." #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" "O maior beneficio disto é que o número de desenvolvedores é virtualmente " "ilimitado, dando coma resultado software de calidade moi alta." #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "¡Únase á comunidade!" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandrakelinux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandrakelinux world." msgstr "" "Mandrakelinux ten unha das maiores comunidades de usuarios e " "desenvolvedores. O rol desta comunidade é moi amplo, dende o informe de " "erros ata o desenvolvemento de novas aplicacións. A comunidade xoga un " "rol clave no mundo de Mandrakelinux." #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrakelinux.com or directly www.mandrakelinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" "Para saber máis sobre a nosa dinámica comunidade, visite www." "mandrakelinux.com ou directamente www.mandrakelinux.com/en/" "cookerdevel.php3 se desexa participar no desenvolvemento." #: share/advertising/05.pl:15 #, c-format msgid "Download Version" msgstr "Versión de Descarga" #: share/advertising/05.pl:17 #, c-format msgid "" "You are now installing Mandrakelinux Download. This is the free " "version that Mandrakesoft wants to keep available to everyone." msgstr "" "Vostede está instalando Mandrakelinux Download. Esta é a versión " "gratuita que Mandrakesoft quere ter dispoñible para tod@s." #: share/advertising/05.pl:19 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" "A versión de Descarga non inclúe todo o software que non é de código " "aberto. Polo tanto, non atopará na versión de Descarga:" #: share/advertising/05.pl:20 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" "\t* Drivers proprietarios (coma os drivers para NVIDIA®, ATI™, etc.)." #: share/advertising/05.pl:21 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" "\t* Software propietario (coma Acrobat® Reader®, RealPlayer®, Flash™, " "etc.)." #: share/advertising/05.pl:23 #, c-format msgid "" "You will not have access to the services included in the other " "Mandrakesoft products either." msgstr "" "Non terá acceso ós servicios incluidos nos outros productos de " "Mandrakesoft." #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "Discovery, O Seu Primeiro Escritorio Linux" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandrakelinux Discovery." msgstr "Está instalando Mandrakelinux Discovery." #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" "Discovery é a distribución de Linux máis sinxela e máis amigable. Inclúe unha selección especial do software máis solicitado para " "Oficina, Multimedia e as actividades da Internet. O seu menú está orientada " "ás diferentes tarefas, cunha soa aplicación por tarefa." #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack." msgstr "Está instalando Mandrakelinux PowerPack." #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandrakesoft's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" "PowerPack é o principal producto Linux para escritorio de " "Mandrakesoft. PowerPack inclúe milleiros de aplicacións - dende as " "máis populares ás máis avanzadas." #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack+." msgstr "Está instalando Mandrakelinux PowerPack+." #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" #: share/advertising/09.pl:13 #, c-format msgid "Mandrakesoft Products" msgstr "Productos de Mandrakesoft" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandrakesoft has developed a wide range of Mandrakelinux " "products." msgstr "" "Mandrakesoft desenvolveu unha gran cantidade de productos " "Mandrakelinux." #: share/advertising/09.pl:17 #, c-format msgid "The Mandrakelinux products are:" msgstr "Os productos Mandrakelinux son:" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "\t* Discovery, O Seu Primeiro Escritorio Linux." #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "" #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandrakelinux for x86-64, The Mandrakelinux solution for making " "the most of your 64-bit processor." msgstr "" #: share/advertising/10.pl:15 #, c-format msgid "Mandrakesoft Products (Nomad Products)" msgstr "Productos de Mandrakesoft (Productos para Nómadas)" #: share/advertising/10.pl:17 #, c-format msgid "" "Mandrakesoft has developed two products that allow you to use Mandrakelinux " "on any computer and without any need to actually install it:" msgstr "" "Mandrakesoft desenvolveu dous productos que lle permiten usar Mandrakelinux " "en calquera ordenador e sen necesidade de instalalo nel:" #: share/advertising/10.pl:18 #, c-format msgid "" "\t* Move, a Mandrakelinux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" "\t* Move, unha distribución de Mandrakelinux que se executa " "totalmente dende un CD-ROM arrincable." #: share/advertising/10.pl:19 #, c-format msgid "" "\t* GlobeTrotter, a Mandrakelinux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" "\t* GlobeTrotter, unha distribución de Mandrakelinux pre-instalada no " "ultracompacto “LaCie Mobile Hard Drive”." #: share/advertising/11.pl:13 #, c-format msgid "Mandrakesoft Products (Professional Solutions)" msgstr "Productos de Mandrakesoft (Solucións Profesionais)" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandrakesoft products designed to meet the professional " "needs:" msgstr "" "Debaixo están os productos de Mandrakesoft deseñados para solucionar as " "necesidades profesionais:" #: share/advertising/11.pl:16 #, c-format msgid "\t* Corporate Desktop, The Mandrakelinux Desktop for Businesses." msgstr "" #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandrakelinux Server Solution." msgstr "" #: share/advertising/11.pl:18 #, c-format msgid "\t* Multi-Network Firewall, The Mandrakelinux Security Solution." msgstr "" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "A Elección de KDE" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" "KDE tamén inclúe unha chea de aplicacións ben integradas coma " "Konqueror, o navegador web e Kontact, o administrador de información persoal." #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "Escolla o seu Ambiente de Escritorio Preferido" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" "KDE é un dos contornos de escritorio gráfico máis avanzados e " "amigable dispoñibles. Inclúe unha chea de aplicacións integradas." #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" "Pero aconsellámoslle que probe tódolos dispoñibles (incluindo GNOME, " "IceWM, etc.) e que escolla o seu favorito." #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" #: share/advertising/14.pl:15 #, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org" #: share/advertising/14.pl:17 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "Con Discovery, descubrirá OpenOffice.org." #: share/advertising/14.pl:19 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" "É unha suite ofimática cunha chea de funcionalidades que inclúe " "aplicacións coma un procesador de palabras, folla de cálculos, presentacións " "e debuxo." #: share/advertising/14.pl:21 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" "OpenOffice.org pode ler e escribir a maioría dos tipos de documentos de " "Microsoft® Office coma os ficheiros Word, Excel e PowerPoint®." #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Kontact" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" "Máis ca un cliente de correo-e con moitas funcionalidades, Kontact " "tamén inclúe un caderno de enderezos, un calendario, e máis " "unha ferramenta para tomar notas!" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" "É a maneira máis sinxela de comunicarse cos seus contactos e de organizar o " "seu tempo." #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "Navegar pola Internet" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "\t* Navegue pola Web con Konqueror." #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "\t* Chatee en liña cos seus amigos usando Kopete." #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "\t* Transfira ficheiros con KBear." #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "\t* ..." #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "Goce cas nosas Funcionalidades Multimedia" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "\t* Vexa os seus videos favoritos con Kaffeine." #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "\t* Escoite os seus ficheiros de música con amaroK." #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* Edite e cree imaxes con O GIMP." #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" "No menú de Mandrakelinux atopará aplicacións fáciles de usar para " "tódalas tarefas:" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" "\t* Cree, edite e comparta documentos de oficina con OpenOffice.org" #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" "\t* Encárguese dos seus datos persoais cas suites integradas de información " "persoal Kontact e Evolution" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "\t* Navegue pola Web con Mozilla e Konqueror" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "\t* Participe en chats en liña con Kopete" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" "\t* Escoite os seus CDs de audio e ficheiros de música, e vexa " "os seus vídeos." #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* Edite imaxes e fotografías con O Gimp" #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "Ambientes de desenvolvemento" #: share/advertising/19.pl:15 share/advertising/22.pl:17 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" "PowerPack proporciónalle as mellores ferramentas para desenvolver as " "súas propias aplicacións." #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" "Gozará co potente contorno de desenvolvemento integrado de KDE, KDevelop, que lle permitirá programar nunha chea de linguaxes." #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" #: share/advertising/20.pl:13 #, c-format msgid "Development Editors" msgstr "Editores de Desenvolvemento" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "PowerPack deixaralle escoller entre estes populares editores:" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "" #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" "\t* XEmacs: outro editor de texto e sistema de desenvolvemento de " "aplicacións de Código Aberto" #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" "\t* Vim: un editor de texto avanzado con máis funcionalidades có " "estándar Vi" #: share/advertising/21.pl:15 #, c-format msgid "Development Languages" msgstr "Linguaxes de Desenvolvemento" #: share/advertising/21.pl:17 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" "Con todas estas potentes ferramentas, poderá escribir aplicacións en " "ducias de linguaxes de programación:" #: share/advertising/21.pl:18 #, c-format msgid "\t* The famous C language." msgstr "\t* A famosa linguaxe de programación C." #: share/advertising/21.pl:19 #, c-format msgid "\t* Object oriented languages:" msgstr "\t* Linguaxes de programación orientadas a obxectos:" #: share/advertising/21.pl:20 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Java™" msgstr "\t\t* Java™" #: share/advertising/21.pl:22 #, c-format msgid "\t* Scripting languages:" msgstr "\t* Linguaxes de script:" #: share/advertising/21.pl:23 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:24 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:25 share/advertising/28.pl:24 #, c-format msgid "\t* And many more." msgstr "\t* E moito máis." #: share/advertising/22.pl:15 #, c-format msgid "Development Tools" msgstr "Ferramentas de Desenvolvemento" #: share/advertising/22.pl:19 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" #: share/advertising/23.pl:13 #, fuzzy, c-format msgid "Groupware Server" msgstr "Servidores" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "\t* Envie e reciba os seus correos-e." #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "" #: share/advertising/24.pl:15 #, c-format msgid "Servers" msgstr "Servidores" #: share/advertising/24.pl:17 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/24.pl:18 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" "\t* Samba: Servicios de impresión e de ficheiros para clientes MS-" "Windows" #: share/advertising/24.pl:19 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "\t* Apache: O servidor Web máis usado" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" "\t* MySQL e PostgreSQL: As bases de datos de Código Aberto " "máis populares do mundo." #: share/advertising/24.pl:21 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" #: share/advertising/24.pl:22 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" "\t* ProFTPD: o software de servidor FTP altamente configurable " "licenciado baixo a GPL" #: share/advertising/24.pl:23 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" "\t* Postfix e Sendmail: Os potentes e populares servidores de " "correo." #: share/advertising/25.pl:13 #, c-format msgid "Mandrakelinux Control Center" msgstr "Centro de Control de Mandrakelinux" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandrakelinux Control Center is an essential collection of " "Mandrakelinux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" "O Centro de Control de Mandrakelinux é unha colección esencial de " "utilidades específicas de Mandrakelinux para facilita-la configuración do " "ordenador." #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" "Apreciará inmediatamente esta colección de máis de 60 prácticas " "utilidades para configurar fácilmente o seu sistema: dispositivos " "hardware, puntos de montaxe, rede e Internet, nivel de seguridade do seu " "ordenador, etc." #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "O Modelo do Código Aberto" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandrakesoft sells added value products and services to keep improving " "Mandrakelinux. If you want to support the open source philosophy " "and the development of Mandrakelinux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, c-format msgid "Online Store" msgstr "Tenda en liña" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandrakesoft products and services, you can visit our " "e-commerce platform." msgstr "" "Para saber máis acerca dos productos e servicios de Mandrakesoft, pode " "visitar a nosa plataforma de comercio electrónico." #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" "Esta plataforma acaba de volverse deseñar para mellorar a súa " "eficiencia e usabilidade." #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandrakesoft.com!" msgstr "Parar hoxe en store.mandrakesoft.com" #: share/advertising/28.pl:15 #, c-format msgid "Mandrakeclub" msgstr "Mandrakeclub" #: share/advertising/28.pl:17 #, c-format msgid "" "Mandrakeclub is the perfect companion to your Mandrakelinux " "product.." msgstr "" "Mandrakeclub é o compañeiro perfecto para o seu producto " "Mandrakelinux." #: share/advertising/28.pl:19 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandrakeclub, such as:" msgstr "" "Se se une a Mandrakeclub poderá gozar de valiosos beneficios, coma:" #: share/advertising/28.pl:20 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandrakesoft.com." msgstr "" "\t* Descontos especiais en productos e servicios da nosa tenda en " "liña store.mandrakesoft.com." #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" "\t* Acceso a aplicacións comerciais (por exemplo os drivers NVIDIA® " "ou ATI™)." #: share/advertising/28.pl:22 #, c-format msgid "\t* Participation in Mandrakelinux user forums." msgstr "\t* Participación nos foros de usuarios de Mandrakelinux." #: share/advertising/28.pl:23 #, c-format msgid "" "\t* Early and privileged access, before public release, to " "Mandrakelinux ISO images." msgstr "" "\t* Acceso privilexiado e anticipado, antes da liberación pública, ás " "imaxes ISO de Mandrakelinux." #: share/advertising/29.pl:13 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandrakeonline is a new premium service that Mandrakesoft is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandrakeonline provides a wide range of valuable services for easily " "updating your Mandrakelinux systems:" msgstr "" "Mandrakeonline fornece unha gran cantidade de valiosos servicios para " "actualizar fácilmente os seus sistemas Mandrakelinux:" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" "\t* Sistema de seguridade perfecto (actualizacións de software " "automáticas)." #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandrakelinux systems with one account." msgstr "" "\t* Administración de tódolos seus sistemas Mandrakelinux cunha conta." #: share/advertising/30.pl:13 #, c-format msgid "Mandrakeexpert" msgstr "Mandrakeexpert" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandrakesoft's technical experts on " "our technical support platform www.mandrakeexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandrakelinux experts, you will save " "a lot of time." msgstr "" "Gracias á axuda dos cualificados expertos de Mandrakelinux, aforrará " "unha chea de tempo." #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandrakelinux, you have the possibility to " "purchase support incidents at store.mandrakesoft.com." msgstr "" #: share/compssUsers.pl:25 #, c-format msgid "Office Workstation" msgstr "Estación de Traballo de Oficina" #: share/compssUsers.pl:27 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Programas de oficina: procesadores de texto (OpenOffice.org Writer, Kword), " "follas de cálculo (OpenOffice.org Calc, Kspread), visualizadores de pdf, etc" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Programas de oficina: procesadores de texto (kword, abiword), follas de " "cálculo (kspread, gnumeric), visualizadores de pdf, etc" #: share/compssUsers.pl:33 #, c-format msgid "Game station" msgstr "Estación de xogos" #: share/compssUsers.pl:34 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Programas de diversión: arcade, taboleiros, estratexia, etc" #: share/compssUsers.pl:37 #, c-format msgid "Multimedia station" msgstr "Estación multimedia" #: share/compssUsers.pl:38 #, c-format msgid "Sound and video playing/editing programs" msgstr "Programas de reproducción e edición de son e vídeo" #: share/compssUsers.pl:43 #, c-format msgid "Internet station" msgstr "Estación de Internet" #: share/compssUsers.pl:44 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Conxunto de ferramentas para ler e enviar correo-e e novas (mutt, tin...) e " "para navegar pola Web" #: share/compssUsers.pl:49 #, c-format msgid "Network Computer (client)" msgstr "Ordenador de Rede (cliente)" #: share/compssUsers.pl:50 #, c-format msgid "Clients for different protocols including ssh" msgstr "Clientes para diferentes protocolos incluindo ssh" #: share/compssUsers.pl:54 #, c-format msgid "Configuration" msgstr "Configuración" #: share/compssUsers.pl:55 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Ferramentas para facilita-la configuración do ordenador" #: share/compssUsers.pl:59 #, c-format msgid "Console Tools" msgstr "Ferramentas da Consola" #: share/compssUsers.pl:60 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Editores, shells, ferramentas de ficheiro, terminais" #: share/compssUsers.pl:65 share/compssUsers.pl:165 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "" "Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include" #: share/compssUsers.pl:69 share/compssUsers.pl:169 #, c-format msgid "Documentation" msgstr "Documentación" #: share/compssUsers.pl:70 share/compssUsers.pl:170 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Libros e Howtos sobre Linux e o Software Libre" #: share/compssUsers.pl:74 share/compssUsers.pl:173 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:75 share/compssUsers.pl:174 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standard Base. Soporte de aplicacións de terceiros" #: share/compssUsers.pl:85 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:88 #, c-format msgid "Groupware" msgstr "Groupware" #: share/compssUsers.pl:89 #, c-format msgid "Kolab Server" msgstr "Servidor Kolab" #: share/compssUsers.pl:92 share/compssUsers.pl:133 #, c-format msgid "Firewall/Router" msgstr "Cortalumes/Encamiñador" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Internet gateway" msgstr "Pasarela de Internet" #: share/compssUsers.pl:96 #, c-format msgid "Mail/News" msgstr "Correo/Novas" #: share/compssUsers.pl:97 #, c-format msgid "Postfix mail server, Inn news server" msgstr "Servidor de correo Postfix, servidor de novas Inn" #: share/compssUsers.pl:100 #, fuzzy, c-format msgid "Directory Server" msgstr "Directorio Dende o que Restaurar" #: share/compssUsers.pl:104 #, c-format msgid "FTP Server" msgstr "Servidor FTP" #: share/compssUsers.pl:105 #, c-format msgid "ProFTPd" msgstr "ProFTPd" #: share/compssUsers.pl:108 #, c-format msgid "DNS/NIS" msgstr "DNS/NIS" #: share/compssUsers.pl:109 #, fuzzy, c-format msgid "Domain Name and Network Information Server" msgstr "Nome do Servidor do Dominio" #: share/compssUsers.pl:112 #, c-format msgid "File and Printer Sharing Server" msgstr "Servidor de Compartimento de Impresoras e Ficheiros" #: share/compssUsers.pl:113 #, c-format msgid "NFS Server, Samba server" msgstr "Servidor NFS, servidor Samba" #: share/compssUsers.pl:116 share/compssUsers.pl:129 #, c-format msgid "Database" msgstr "Bases de datos" #: share/compssUsers.pl:117 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "Servidores de bases de datos PostgreSQL e MySQL" #: share/compssUsers.pl:121 #, c-format msgid "Web/FTP" msgstr "Web/FTP" #: share/compssUsers.pl:122 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: share/compssUsers.pl:125 #, c-format msgid "Mail" msgstr "Correo-e" #: share/compssUsers.pl:126 #, c-format msgid "Postfix mail server" msgstr "Servidor de correo Postfix" #: share/compssUsers.pl:130 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "Servidores de bases de datos PostgreSQL ou MySQL" #: share/compssUsers.pl:137 #, c-format msgid "Network Computer server" msgstr "Servidor de Redes de Ordenadores" #: share/compssUsers.pl:138 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor ssh" #: share/compssUsers.pl:146 #, c-format msgid "KDE Workstation" msgstr "Estación de Traballo KDE" #: share/compssUsers.pl:147 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "O Ambiente de Escritorio KDE, o ambiente gráfico básico cunha colección de " "ferramentas que o acompañan" #: share/compssUsers.pl:151 #, c-format msgid "GNOME Workstation" msgstr "Estación de Traballo Gnome" #: share/compssUsers.pl:152 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Un ambiente gráfico cun conxunto de aplicacións amigables e ferramentas de " "escritorio" #: share/compssUsers.pl:155 #, c-format msgid "Other Graphical Desktops" msgstr "Outros Escritorios Gráficos" #: share/compssUsers.pl:156 #, c-format msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc" #: share/compssUsers.pl:179 #, c-format msgid "Utilities" msgstr "Utilidades" #: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "Servidor SSH" #: share/compssUsers.pl:186 #, c-format msgid "Webmin" msgstr "Webmin" #: share/compssUsers.pl:187 #, c-format msgid "Webmin Remote Configuration Server" msgstr "Servidor de Configuración Remota Webmin" #: share/compssUsers.pl:191 #, c-format msgid "Network Utilities/Monitoring" msgstr "Monitorización/Utilidades de Rede" #: share/compssUsers.pl:192 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:196 #, c-format msgid "Mandrakesoft Wizards" msgstr "Asistentes de Mandrakesoft" #: share/compssUsers.pl:197 #, c-format msgid "Wizards to configure server" msgstr "Asistentes para configurar o servidor" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrakelinux tools\n" " --incident - program should be one of mandrakelinux tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" "[--add]\n" " --add - asistente \"engadir unha interface de rede\"\n" " --del - asistente \"eliminar unha interface de rede\"\n" " --skip-wizard - administrar as conexións\n" " --internet - configurar Internet\n" " --wizard - coma --add" #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandrakelinux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[teclado]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] " "[-v|--version] " #: standalone/XFdrake:61 #, c-format msgid "You need to reboot for changes to take effect" msgstr "Cómpre reiniciar o equipo para que os cambios se teñan en conta" #: standalone/XFdrake:92 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Saia da sesión e use Ctrl-Alt-Retroceso" #: standalone/XFdrake:96 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:74 #, c-format msgid "Useless without Terminal Server" msgstr "" #: standalone/drakTermServ:106 standalone/drakTermServ:112 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:123 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:129 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:211 standalone/drakTermServ:214 #, c-format msgid "Terminal Server Configuration" msgstr "Configuración de Terminal Server" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "Activar Servidor" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "Desactivar Servidor" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "Inicia-lo Servidor" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "Para-lo Servidor" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "Engadir/Eliminar Usuarios" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "Engadir/Eliminar Clientes" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Imaxes" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "Clientes/Usuarios" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Asistente da Primeira Vez" #: standalone/drakTermServ:325 standalone/drakTermServ:326 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:332 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:377 #, c-format msgid "Cancel Wizard" msgstr "Saír do Asistente" #: standalone/drakTermServ:392 #, c-format msgid "Please save dhcpd config!" msgstr "Garde a configuración de dhcpd!" #: standalone/drakTermServ:420 #, fuzzy, c-format msgid "Use thin clients." msgstr "Cliente DHCP" #: standalone/drakTermServ:422 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:444 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:445 standalone/drakTermServ:740 #: standalone/drakTermServ:757 #, c-format msgid "This will take a few minutes." msgstr "Isto pode levar uns minutos." #: standalone/drakTermServ:449 standalone/drakTermServ:468 #, c-format msgid "Done!" msgstr "¡Feito!" #: standalone/drakTermServ:454 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:474 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:509 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "Configuración de Internet" #: standalone/drakTermServ:510 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:516 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:534 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:554 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:566 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:570 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:575 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:584 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:605 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" #: standalone/drakTermServ:640 #, c-format msgid "Boot Floppy" msgstr "Disquete de Arrinque" #: standalone/drakTermServ:642 #, c-format msgid "Boot ISO" msgstr "ISO de Arrinque" #: standalone/drakTermServ:644 #, c-format msgid "PXE Image" msgstr "Imaxe PXE" #: standalone/drakTermServ:705 #, c-format msgid "Default kernel version" msgstr "Versión por defecto do kernel" #: standalone/drakTermServ:708 #, c-format msgid "Create PXE images." msgstr "Crear imaxes PXE." #: standalone/drakTermServ:738 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: standalone/drakTermServ:746 #, c-format msgid "No kernel selected!" msgstr "¡Non hai ningún kernel seleccionado!" #: standalone/drakTermServ:749 #, c-format msgid "Build Single NIC -->" msgstr "" #: standalone/drakTermServ:753 #, c-format msgid "No NIC selected!" msgstr "¡Non hai ningún NIC seleccionado!" #: standalone/drakTermServ:756 #, c-format msgid "Build All Kernels -->" msgstr "" #: standalone/drakTermServ:767 #, c-format msgid "<-- Delete" msgstr "<-- Borrar" #: standalone/drakTermServ:772 #, c-format msgid "No image selected!" msgstr "Non hai ningunha imaxe seleccionada!" #: standalone/drakTermServ:775 #, fuzzy, c-format msgid "Delete All NBIs" msgstr "Seleccione un ficheiro" #: standalone/drakTermServ:901 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: standalone/drakTermServ:906 #, c-format msgid "Add User -->" msgstr "Engadir Usuario -->" #: standalone/drakTermServ:912 #, c-format msgid "<-- Del User" msgstr "<-- Eliminar Usuario" #: standalone/drakTermServ:948 #, c-format msgid "type: %s" msgstr "tipo: %s" #: standalone/drakTermServ:952 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:982 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Permiti-la configuración\n" "do hardware local." #: standalone/drakTermServ:991 #, c-format msgid "No net boot images created!" msgstr "" #: standalone/drakTermServ:1010 #, fuzzy, c-format msgid "Thin Client" msgstr "Cliente DHCP" #: standalone/drakTermServ:1014 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "Cliente DHCP" #: standalone/drakTermServ:1015 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1016 #, c-format msgid "Add Client -->" msgstr "Engadir Cliente -->" #: standalone/drakTermServ:1030 #, fuzzy, c-format msgid "type: fat" msgstr "Tipo: " #: standalone/drakTermServ:1031 #, fuzzy, c-format msgid "type: thin" msgstr "Tipo: " #: standalone/drakTermServ:1038 #, fuzzy, c-format msgid "local config: false" msgstr "Impresora local" #: standalone/drakTermServ:1039 #, fuzzy, c-format msgid "local config: true" msgstr "reconfigurar" #: standalone/drakTermServ:1047 #, c-format msgid "<-- Edit Client" msgstr "<-- Editar Cliente" #: standalone/drakTermServ:1073 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1080 #, c-format msgid "Delete Client" msgstr "Borrar Cliente" #: standalone/drakTermServ:1089 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Configurando..." #: standalone/drakTermServ:1104 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: standalone/drakTermServ:1149 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1165 #, c-format msgid "All clients will use %s" msgstr "Tódolos clientes usarán %s" #: standalone/drakTermServ:1197 #, c-format msgid "Subnet:" msgstr "Subrede:" #: standalone/drakTermServ:1204 #, c-format msgid "Netmask:" msgstr "Máscara de Rede:" #: standalone/drakTermServ:1211 #, c-format msgid "Routers:" msgstr "Encamiñadores:" #: standalone/drakTermServ:1218 #, c-format msgid "Subnet Mask:" msgstr "Máscara de Subrede:" #: standalone/drakTermServ:1225 #, c-format msgid "Broadcast Address:" msgstr "Enderezo de Broadcast:" #: standalone/drakTermServ:1232 #, c-format msgid "Domain Name:" msgstr "Nome do Dominio:" #: standalone/drakTermServ:1240 #, c-format msgid "Name Servers:" msgstr "Nomes dos Servidores:" #: standalone/drakTermServ:1251 #, c-format msgid "IP Range Start:" msgstr "Comezo do Rango de IP:" #: standalone/drakTermServ:1252 #, c-format msgid "IP Range End:" msgstr "Remate do Rango de IP:" #: standalone/drakTermServ:1294 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1296 #, fuzzy, c-format msgid "Write Config" msgstr "reconfigurar" #: standalone/drakTermServ:1312 #, c-format msgid "dhcpd Server Configuration" msgstr "Configuración do Servidor dhcpd" #: standalone/drakTermServ:1313 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "A maioría destes valores foron\n" "extraidos do sistema actual.\n" "Pode modificalos se é necesario." #: standalone/drakTermServ:1316 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: standalone/drakTermServ:1463 #, c-format msgid "Please insert floppy disk:" msgstr "Insira un disquete na unidade:" #: standalone/drakTermServ:1467 #, c-format msgid "Could not access the floppy!" msgstr "¡Non se puido acceder ó disquete!" #: standalone/drakTermServ:1469 #, c-format msgid "Floppy can be removed now" msgstr "Xa pode extrae-lo disquete" #: standalone/drakTermServ:1472 #, c-format msgid "No floppy drive available!" msgstr "¡Non hai ningunha disqueteira dispoñible!" #: standalone/drakTermServ:1477 #, c-format msgid "PXE image is %s/%s" msgstr "A imaxe PXE é %s/%s" #: standalone/drakTermServ:1479 #, c-format msgid "Error writing %s/%s" msgstr "Erro escribindo %s/%s" #: standalone/drakTermServ:1489 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: standalone/drakTermServ:1491 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: standalone/drakTermServ:1512 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "¡Cómpre crear primeiro /etc/dhcpd.conf!" #: standalone/drakTermServ:1672 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1685 #, c-format msgid "%s is not a user..\n" msgstr "%s non é un usuario..\n" #: standalone/drakTermServ:1686 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s xa é un usuario de Terminal Server\n" #: standalone/drakTermServ:1688 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1690 #, c-format msgid "%s added to Terminal Server\n" msgstr "%s engadido a Terminal Server\n" #: standalone/drakTermServ:1707 #, c-format msgid "Deleted %s...\n" msgstr "Eliminado %s...\n" #: standalone/drakTermServ:1709 standalone/drakTermServ:1782 #, c-format msgid "%s not found...\n" msgstr "%s non atopado...\n" #: standalone/drakTermServ:1810 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "/etc/hosts.allow e /etc/hosts.deny xa configurados - sen cambios" #: standalone/drakTermServ:1950 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "¡Erro!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "Non se pode atopa-lo ficheiro de imaxe `%s'." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Configurador da Instalación Automática" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, fuzzy, c-format msgid "replay" msgstr "Reproducir" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "manual" #: standalone/drakautoinst:64 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "Configuración do estilo de arrinque" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Creando un disquete de instalación automática" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Insira outro disquete baleiro na unidade %s (disco para os drivers)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Creando un disquete de instalación automática (disco dos drivers)" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 #: standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "¡Noraboa!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "O disquete xerouse con éxito.\n" "Agora poderá reproducir a instalación." #: standalone/drakautoinst:289 #, c-format msgid "Auto Install" msgstr "Instalación Automática" #: standalone/drakautoinst:358 #, c-format msgid "Add an item" msgstr "Engadir un elemento" #: standalone/drakautoinst:365 #, c-format msgid "Remove the last item" msgstr "Elimina-lo último elemento" #: standalone/drakbackup:88 #, c-format msgid "hd" msgstr "disco duro" #: standalone/drakbackup:88 #, c-format msgid "tape" msgstr "cinta" #: standalone/drakbackup:152 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect é unha extensión da linguaxe de script TCL que permite sesións " "interactivas sen a intervención do usuario." #: standalone/drakbackup:153 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Almacena-lo contrasinal deste sistema na configuración de drakbackup." #: standalone/drakbackup:154 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:155 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Esta opción gardará os ficheiros que cambiaron. O comportamento exacto " "depende de se se usa o modo incremental ou diferencial." #: standalone/drakbackup:156 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "As copias de seguridade incrementais só gardan os ficheiros novos ou que " "cambiaron dende a última copia de seguridade." #: standalone/drakbackup:157 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "As copias de seguridade diferenciais só gardan os ficheiros novos ou que " "cambiaron dende a copia de seguridade 'base' orixinal." #: standalone/drakbackup:158 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" "Debe especificar un nome dun usuario local ou un enderezo de correo-e ó que " "enviarlle os resultados da copia de seguridade. Cómpre especificar un " "servidor de correo-e." #: standalone/drakbackup:159 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:160 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Para garda-las copias de seguridade noutros soportes, os ficheiros creanse " "no disco duro e despois móvense a outros soportes. Se activa esta opción os " "ficheiros tar do disco duro eliminaranse despois de face-la copia de " "seguridade." #: standalone/drakbackup:161 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:162 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "Personalizado permítelle especifica-lo seu propio día e hora. As outras " "opcións usan run-parts en /etc/crontab." #: standalone/drakbackup:326 #, c-format msgid "No media selected for cron operation." msgstr "Non seleccionou ningún soporte para a operación de cron." #: standalone/drakbackup:330 #, c-format msgid "No interval selected for cron operation." msgstr "Non seleccionou ningún intervalo para a operación de cron." #: standalone/drakbackup:377 #, c-format msgid "Interval cron not available as non-root" msgstr "O intervalo de cron non estará dispoñible se non é root" #: standalone/drakbackup:462 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "¡\"%s\" non é un nome de usuario local ou enderezo de correo-e válido!" #: standalone/drakbackup:466 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" "¡\"%s\" é un usuario local, pero non seleccionou un SMTP local, asi que debe " "usar un enderezo de correo-e completo!" #: standalone/drakbackup:475 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" "A lista de usuario válidos cambiou, rescribindo o ficheiro de configuración." #: standalone/drakbackup:477 #, c-format msgid "Old user list:\n" msgstr "Lista de usuarios antiga:\n" #: standalone/drakbackup:479 #, c-format msgid "New user list:\n" msgstr "Lista de usuario nova:\n" #: standalone/drakbackup:524 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " Informe de DrakBackup\n" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Informe do Daemon de DrakBackup\n" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " Detalles do Informe de DrakBackup\n" "\n" "\n" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, c-format msgid "Total progress" msgstr "Progreso total" #: standalone/drakbackup:609 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: standalone/drakbackup:625 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "Adaptador %s: %s" #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: standalone/drakbackup:643 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Sen contrasinal" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Denegouse o permiso ó transferir %s a %s" #: standalone/drakbackup:645 #, c-format msgid "Can not find %s on %s" msgstr "Non se puido atopar %s en %s" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: standalone/drakbackup:697 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: standalone/drakbackup:701 #, c-format msgid "WebDAV transfer failed!" msgstr "¡Fallo na transferencia de WebDAV!" #: standalone/drakbackup:722 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "¡Non hai ningún CD-R/DVD-R na unidade!" #: standalone/drakbackup:726 #, c-format msgid "Does not appear to be recordable media!" msgstr "¡Semella que non é un soporte gravable!" #: standalone/drakbackup:731 #, c-format msgid "Not erasable media!" msgstr "¡Non é un soporte borrable!" #: standalone/drakbackup:773 #, c-format msgid "This may take a moment to erase the media." msgstr "Borra-lo soporte pode levar un cacho." #: standalone/drakbackup:831 #, c-format msgid "Permission problem accessing CD." msgstr "Problema cos permisos ó acceder ó CD." #: standalone/drakbackup:858 #, c-format msgid "No tape in %s!" msgstr "¡Non hai cinta en %s!" #: standalone/drakbackup:964 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:983 standalone/drakbackup:1016 #, c-format msgid "Backup system files..." msgstr "Facendo Copia de Seguridade dos ficheiros do sistema..." #: standalone/drakbackup:1017 standalone/drakbackup:1058 #, c-format msgid "Hard Disk Backup files..." msgstr "Ficheiros de Copia de Seguridade do Disco Duro..." #: standalone/drakbackup:1057 #, c-format msgid "Backup User files..." msgstr "Facendo Copia de Seguridade dos ficheiros de usuario..." #: standalone/drakbackup:1092 #, c-format msgid "Backup Other files..." msgstr "Facendo Copia de Seguridade doutros ficheiros..." #: standalone/drakbackup:1093 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Progreso da Copia de Seguridade do Disco Duro..." #: standalone/drakbackup:1098 #, c-format msgid "No changes to backup!" msgstr "¡Non hai cambios dos que facer copia de seguridade!" #: standalone/drakbackup:1116 standalone/drakbackup:1140 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: standalone/drakbackup:1125 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Problema ca conexión FTP: Non foi posible envia-los ficheiros por FTP.\n" #: standalone/drakbackup:1126 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Erro mentres se enviaba o ficheiro por FTP. Corrixa a configuración de FTP." #: standalone/drakbackup:1128 #, c-format msgid "file list sent by FTP: %s\n" msgstr "enviouse a lista de ficheiros por FTP: %s\n" #: standalone/drakbackup:1145 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: standalone/drakbackup:1150 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: standalone/drakbackup:1159 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "Erro ó envia-lo correo-e. A mensaxe do informe non se enviou." #: standalone/drakbackup:1160 #, c-format msgid " Error while sending mail. \n" msgstr " Erro mentres se enviaba o correo-e.\n" #: standalone/drakbackup:1190 #, c-format msgid "Can not create catalog!" msgstr "¡Non se puido crea-lo catálogo!" #: standalone/drakbackup:1423 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Seleccione tódalas opcións que necesita.\n" #: standalone/drakbackup:1424 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Estas opcións poden facer unha copia de seguridade de tódolos ficheiros do " "directorio /etc e restaurala.\n" #: standalone/drakbackup:1425 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" "Facer unha Copia de Seguridade dos ficheiros do Sistema. (directorio /etc)" #: standalone/drakbackup:1426 standalone/drakbackup:1490 #: standalone/drakbackup:1556 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" "Usar Copias de Seguridade Incrementais/Diferenciais (non rempraza-las " "copias de seguridade antigas)" #: standalone/drakbackup:1428 standalone/drakbackup:1492 #: standalone/drakbackup:1558 #, c-format msgid "Use Incremental Backups" msgstr "Usar Copias de Seguridade Incrementais" #: standalone/drakbackup:1428 standalone/drakbackup:1492 #: standalone/drakbackup:1558 #, c-format msgid "Use Differential Backups" msgstr "Usar Copias de Seguridade Diferenciais" #: standalone/drakbackup:1430 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Non incluir ficheiros críticos (passwd, group, fstab)" #: standalone/drakbackup:1431 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Con esta opción poderá restaurar calquera versión do\n" "seu directorio /etc." #: standalone/drakbackup:1462 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "Escolla tódolos usuarios que desexa incluir na copia de seguridade." #: standalone/drakbackup:1489 #, c-format msgid "Do not include the browser cache" msgstr "Non inclui-la caché do navegador" #: standalone/drakbackup:1543 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Seleccione os ficheiros e os directorios e despois prema en 'Aceptar'" #: standalone/drakbackup:1544 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "Elimina-los Seleccionados" #: standalone/drakbackup:1607 #, c-format msgid "Users" msgstr "Usuarios" #: standalone/drakbackup:1627 #, c-format msgid "Use network connection to backup" msgstr "Usar unha conexión de rede para face-la copia de seguridade" #: standalone/drakbackup:1629 #, c-format msgid "Net Method:" msgstr "" #: standalone/drakbackup:1633 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1634 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: standalone/drakbackup:1636 #, c-format msgid "Transfer Now" msgstr "Transferir Agora" #: standalone/drakbackup:1638 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: standalone/drakbackup:1641 #, c-format msgid "Host name or IP." msgstr "Nome de máquina ou IP." #: standalone/drakbackup:1646 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1658 #, c-format msgid "Remember this password" msgstr "Recorde este contrasinal" #: standalone/drakbackup:1674 #, c-format msgid "Need hostname, username and password!" msgstr "Necesítase un nome de máquina, un nome de usuario e un contrasinal!" #: standalone/drakbackup:1765 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Usar CD-R/DVD-R para face-la copia de seguridade" #: standalone/drakbackup:1768 #, c-format msgid "Choose your CD/DVD device" msgstr "Escolla o seu dispositivo de CD/DVD" #: standalone/drakbackup:1773 #, c-format msgid "Choose your CD/DVD media size" msgstr "Escolla o tamaño do soporte CD/DVD" #: standalone/drakbackup:1780 #, c-format msgid "Multisession CD" msgstr "CD Multisesión" #: standalone/drakbackup:1782 #, c-format msgid "CDRW media" msgstr "Soporte CDRW" #: standalone/drakbackup:1788 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Borra-lo seu soporte RW (1ª Sesión)" #: standalone/drakbackup:1789 #, c-format msgid " Erase Now " msgstr " Borrar Agora " #: standalone/drakbackup:1795 #, c-format msgid "DVD+RW media" msgstr "Soporte DVD+RW" #: standalone/drakbackup:1797 #, c-format msgid "DVD-R media" msgstr "Soporte DVD-R" #: standalone/drakbackup:1799 #, c-format msgid "DVDRAM device" msgstr "Dispositivo DVDRAM" #: standalone/drakbackup:1830 #, c-format msgid "No CD device defined!" msgstr "¡Non hai ningún dispositivo de CD definido!" #: standalone/drakbackup:1872 #, c-format msgid "Use tape to backup" msgstr "Usar cinta para face-la copia de seguridade" #: standalone/drakbackup:1875 #, c-format msgid "Device name to use for backup" msgstr "Nome do dispositivo que se usará para face-la copia de seguridade" #: standalone/drakbackup:1881 #, c-format msgid "Backup directly to tape" msgstr "Gardar a copia de seguridade directamente na cinta" #: standalone/drakbackup:1887 #, c-format msgid "Do not rewind tape after backup" msgstr "Non rebobine a cinta despois de face-la copia de seguridade" #: standalone/drakbackup:1893 #, c-format msgid "Erase tape before backup" msgstr "Borra-la cinta antes de face-la copia de seguridade" #: standalone/drakbackup:1899 #, c-format msgid "Eject tape after the backup" msgstr "Expulsa-la cinta despois de face-la copia de seguridade" #: standalone/drakbackup:1973 #, c-format msgid "Enter the directory to save to:" msgstr "Introduza un directorio no que gardar:" #: standalone/drakbackup:1977 #, c-format msgid "Directory to save to" msgstr "Directorio no que gardar" #: standalone/drakbackup:1983 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Tamaño máximo\n" "permitido por Drakbackup (MB)" #: standalone/drakbackup:2049 #, c-format msgid "CD-R / DVD-R" msgstr "CD-R / DVD-R" #: standalone/drakbackup:2054 #, c-format msgid "HardDrive / NFS" msgstr "Disco Duro / NFS" #: standalone/drakbackup:2069 standalone/drakbackup:2070 #: standalone/drakbackup:2075 #, c-format msgid "hourly" msgstr "cada hora" #: standalone/drakbackup:2069 standalone/drakbackup:2071 #: standalone/drakbackup:2076 #, c-format msgid "daily" msgstr "diariamente" #: standalone/drakbackup:2069 standalone/drakbackup:2072 #: standalone/drakbackup:2077 #, c-format msgid "weekly" msgstr "semanalmente" #: standalone/drakbackup:2069 standalone/drakbackup:2073 #: standalone/drakbackup:2078 #, c-format msgid "monthly" msgstr "mensualmente" #: standalone/drakbackup:2069 standalone/drakbackup:2074 #: standalone/drakbackup:2079 #, c-format msgid "custom" msgstr "personalizado" #: standalone/drakbackup:2083 #, c-format msgid "January" msgstr "Xaneiro" #: standalone/drakbackup:2083 #, c-format msgid "February" msgstr "Febreiro" #: standalone/drakbackup:2083 #, c-format msgid "March" msgstr "Marzo" #: standalone/drakbackup:2084 #, c-format msgid "April" msgstr "Abril" #: standalone/drakbackup:2084 #, c-format msgid "May" msgstr "Maio" #: standalone/drakbackup:2084 #, c-format msgid "June" msgstr "Xuño" #: standalone/drakbackup:2084 #, c-format msgid "July" msgstr "Xullo" #: standalone/drakbackup:2084 #, c-format msgid "August" msgstr "Agosto" #: standalone/drakbackup:2084 #, c-format msgid "September" msgstr "Setembro" #: standalone/drakbackup:2085 #, c-format msgid "October" msgstr "Outubro" #: standalone/drakbackup:2085 #, c-format msgid "November" msgstr "Novembro" #: standalone/drakbackup:2085 #, c-format msgid "December" msgstr "Decembro" #: standalone/drakbackup:2088 #, c-format msgid "Sunday" msgstr "Domingo" #: standalone/drakbackup:2088 #, c-format msgid "Monday" msgstr "Luns" #: standalone/drakbackup:2088 #, c-format msgid "Tuesday" msgstr "Martes" #: standalone/drakbackup:2089 #, c-format msgid "Wednesday" msgstr "Mércores" #: standalone/drakbackup:2089 #, c-format msgid "Thursday" msgstr "Xoves" #: standalone/drakbackup:2089 #, c-format msgid "Friday" msgstr "Venres" #: standalone/drakbackup:2089 #, c-format msgid "Saturday" msgstr "Sábado" #: standalone/drakbackup:2121 #, c-format msgid "Use daemon" msgstr "Usar daemon" #: standalone/drakbackup:2125 #, c-format msgid "Please choose the time interval between each backup" msgstr "Escolla o intervalo de tempo entre cada copia de seguridade" #: standalone/drakbackup:2131 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2136 #, c-format msgid "Minute" msgstr "Minuto" #: standalone/drakbackup:2140 #, c-format msgid "Hour" msgstr "Hora" #: standalone/drakbackup:2144 #, c-format msgid "Day" msgstr "Día" #: standalone/drakbackup:2148 #, c-format msgid "Month" msgstr "Mes" #: standalone/drakbackup:2152 #, c-format msgid "Weekday" msgstr "Día da semana" #: standalone/drakbackup:2158 #, c-format msgid "Please choose the media for backup." msgstr "Escolla o soporte no que gardar a copia de seguridade." #: standalone/drakbackup:2164 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Asegúrese de que o daemon cron está incluido no seus servicios." #: standalone/drakbackup:2165 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2166 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: standalone/drakbackup:2213 #, c-format msgid "Please choose the compression type" msgstr "Escolla o tipo de compresión" #: standalone/drakbackup:2217 #, c-format msgid "Use .backupignore files" msgstr "Usar ficheiros .backupignore" #: standalone/drakbackup:2219 #, c-format msgid "Send mail report after each backup to:" msgstr "Enviar un informe por correo-e despois de cada copia de seguridade a:" #: standalone/drakbackup:2225 #, c-format msgid "SMTP server for mail:" msgstr "Servidor SMTP para o correo-e:" #: standalone/drakbackup:2230 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "Elimina-los ficheiros tar do Disco Duro despois de garda-la copia de " "seguridade noutro soporte." #: standalone/drakbackup:2270 #, c-format msgid "What" msgstr "Qué" #: standalone/drakbackup:2275 #, c-format msgid "Where" msgstr "Onde" #: standalone/drakbackup:2280 #, c-format msgid "When" msgstr "Cando" #: standalone/drakbackup:2285 #, c-format msgid "More Options" msgstr "Máis Opcións" #: standalone/drakbackup:2298 #, c-format msgid "Backup destination not configured..." msgstr "O destino da copia de seguridade non está configurado..." #: standalone/drakbackup:2318 standalone/drakbackup:4241 #, c-format msgid "Drakbackup Configuration" msgstr "Configuración de Drakbackup" #: standalone/drakbackup:2334 #, c-format msgid "Please choose where you want to backup" msgstr "Escolla onde quere poñe-la copia de seguridade" #: standalone/drakbackup:2337 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "" "O Disco Duro úsase para prepara-las copias de seguridade para tódolos " "soportes" #: standalone/drakbackup:2337 #, c-format msgid "Across Network" msgstr "" #: standalone/drakbackup:2337 #, c-format msgid "On CD-R" msgstr "Nun CD-R" #: standalone/drakbackup:2337 #, c-format msgid "On Tape Device" msgstr "Nun Dispositivo de Cinta" #: standalone/drakbackup:2383 #, c-format msgid "Backup Users" msgstr "Usuarios de Copias de Seguridade" #: standalone/drakbackup:2384 #, c-format msgid " (Default is all users)" msgstr " (Por omisión son tódolos usuarios)" #: standalone/drakbackup:2397 #, c-format msgid "Please choose what you want to backup" msgstr "Escolla de qué quere face-la copia de seguridade" #: standalone/drakbackup:2398 #, c-format msgid "Backup System" msgstr "Sistema de Copia de Seguridade" #: standalone/drakbackup:2400 #, c-format msgid "Select user manually" msgstr "Seleccionar usuario a man" #: standalone/drakbackup:2429 #, c-format msgid "Please select data to backup..." msgstr "Seleccione os datos dos que desexa facer copia de seguridade..." #: standalone/drakbackup:2501 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: standalone/drakbackup:2502 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Ficheiros do Sistema:\n" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Ficheiros de Usuario:\n" #: standalone/drakbackup:2506 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Outros Ficheiros:\n" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Gardar no Disco Duro na ruta: %s\n" #: standalone/drakbackup:2509 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tLimita-lo uso do disco a %s MB\n" #: standalone/drakbackup:2512 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Elimina-los ficheiros tar do disco duro despois de face-la copia de " "seguridade.\n" #: standalone/drakbackup:2517 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Gravar nun CD" #: standalone/drakbackup:2518 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2519 #, c-format msgid " on device: %s" msgstr " no dispositivo: %s" #: standalone/drakbackup:2520 #, c-format msgid " (multi-session)" msgstr " (multisesión)" #: standalone/drakbackup:2521 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Gardar nunha Cinta no dispositivo: %s" #: standalone/drakbackup:2522 #, c-format msgid "\t\tErase=%s" msgstr "\t\tBorrar=%s" #: standalone/drakbackup:2524 #, c-format msgid "\tBackup directly to Tape\n" msgstr "\tGardar a copia de seguridade directamente na cinta\n" #: standalone/drakbackup:2526 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: standalone/drakbackup:2527 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: standalone/drakbackup:2528 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Opcións:\n" #: standalone/drakbackup:2529 #, c-format msgid "\tDo not include System Files\n" msgstr "\tNon inclui-los Ficheiros do Sistema\n" #: standalone/drakbackup:2531 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tAs copias de seguridade usan tar e bzip2\n" #: standalone/drakbackup:2532 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tAs copias de seguridade usan tar e gzip\n" #: standalone/drakbackup:2533 #, c-format msgid "\tBackups use tar only\n" msgstr "\tAs copias de seguridade só usan tar\n" #: standalone/drakbackup:2535 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tUsar ficheiros .backupignore\n" #: standalone/drakbackup:2536 #, c-format msgid "\tSend mail to %s\n" msgstr "\tEnviar unha mensaxe a %s\n" #: standalone/drakbackup:2537 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\tUsando o servidor SMTP %s\n" #: standalone/drakbackup:2539 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: standalone/drakbackup:2540 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Disco duro.\n" #: standalone/drakbackup:2541 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: standalone/drakbackup:2542 #, c-format msgid "\t-Tape \n" msgstr "\t-Cinta \n" #: standalone/drakbackup:2543 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Rede usando FTP.\n" #: standalone/drakbackup:2544 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Rede usando SSH.\n" #: standalone/drakbackup:2545 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Rede usando rsync.\n" #: standalone/drakbackup:2546 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Rede usando webdav.\n" #: standalone/drakbackup:2548 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Non hai configuración, prema Asistente ou Avanzado.\n" #: standalone/drakbackup:2553 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Lista de datos a restaurar:\n" "\n" #: standalone/drakbackup:2555 #, c-format msgid "- Restore System Files.\n" msgstr "- Restaura-los Ficheiros do Sistema.\n" #: standalone/drakbackup:2557 standalone/drakbackup:2567 #, c-format msgid " - from date: %s %s\n" msgstr " - dende a data: %s %s\n" #: standalone/drakbackup:2560 #, c-format msgid "- Restore User Files: \n" msgstr "- Restaura-los Ficheiros de Usuario: \n" #: standalone/drakbackup:2565 #, c-format msgid "- Restore Other Files: \n" msgstr "- Restaurar Outros Ficheiros: \n" #: standalone/drakbackup:2744 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Lista de datos corrompidos:\n" "\n" #: standalone/drakbackup:2746 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Deseleccione ou elimíneo a próxima vez." #: standalone/drakbackup:2756 #, c-format msgid "Backup files are corrupted" msgstr "Os ficheiros de copia de seguridade están corrompidos" #: standalone/drakbackup:2777 #, c-format msgid " All of your selected data have been " msgstr " Tódolos datos que seleccionou foron " #: standalone/drakbackup:2778 #, c-format msgid " Successfully Restored on %s " msgstr " Restaurados con Éxito en %s " #: standalone/drakbackup:2898 #, c-format msgid " Restore Configuration " msgstr " Configuración da Restauración " #: standalone/drakbackup:2926 #, c-format msgid "OK to restore the other files." msgstr "Aceptar para restaurar os outros ficheiros." #: standalone/drakbackup:2942 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Lista de usuarios a restaurar (só a data máis recente de cada usuario é " "importante)" #: standalone/drakbackup:3007 #, c-format msgid "Please choose the date to restore:" msgstr "Escolla unha data para restaurar:" #: standalone/drakbackup:3044 #, c-format msgid "Restore from Hard Disk." msgstr "Restaurar dende o Disco Duro." #: standalone/drakbackup:3046 #, c-format msgid "Enter the directory where backups are stored" msgstr "Introduza o directorio onde están as copias de seguridade" #: standalone/drakbackup:3050 #, c-format msgid "Directory with backups" msgstr "Directorio con copias de seguridade" #: standalone/drakbackup:3104 #, c-format msgid "Select another media to restore from" msgstr "Seleccione outro soporte dende o que restaurar" #: standalone/drakbackup:3106 #, c-format msgid "Other Media" msgstr "Outros Soportes" #: standalone/drakbackup:3111 #, c-format msgid "Restore system" msgstr "Restaura-lo sistema" #: standalone/drakbackup:3112 #, c-format msgid "Restore Users" msgstr "Restaura-los Usuarios" #: standalone/drakbackup:3113 #, c-format msgid "Restore Other" msgstr "Restaurar Outras Cousas" #: standalone/drakbackup:3115 #, c-format msgid "Select path to restore (instead of /)" msgstr "Seleccione a ruta para restaurar (en vez de /)" #: standalone/drakbackup:3119 standalone/drakbackup:3401 #, c-format msgid "Path To Restore To" msgstr "Ruta Para Restaurar" #: standalone/drakbackup:3122 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Facer nova copia de seguridade antes de restaurar (só para incrementais)" #: standalone/drakbackup:3124 #, c-format msgid "Remove user directories before restore." msgstr "Elimina-los directorios de usuario antes de restaurar." #: standalone/drakbackup:3209 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3212 #, c-format msgid "Search Backups" msgstr "Buscar Copias de Seguridade" #: standalone/drakbackup:3230 #, c-format msgid "No matches found..." msgstr "Non se atoparon resultados..." #: standalone/drakbackup:3234 #, c-format msgid "Restore Selected" msgstr "Restaura-los Seleccionados" #: standalone/drakbackup:3369 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" "Clique en data/hora para ve-los ficheiros de copia de seguridade.\n" "Prema Ctrl e clique para seleccionar varios ficheiros." #: standalone/drakbackup:3375 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "Restaura-los Seleccionados\n" "Entrada do Catálogo" #: standalone/drakbackup:3384 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Restaura-los Seleccionados\n" "Ficheiros" #: standalone/drakbackup:3461 #, c-format msgid "Backup files not found at %s." msgstr "Non se atoparon ficheiros de copia de seguridade en %s." #: standalone/drakbackup:3474 #, c-format msgid "Restore From CD" msgstr "Restaurar Dende un CD" #: standalone/drakbackup:3474 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Insira o CD ca etiqueta de volume %s\n" "na unidade de CD que está montada en /mnt/cdrom" #: standalone/drakbackup:3476 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "A etiqueta do CD non é correcta. A etiqueta do disco é %s." #: standalone/drakbackup:3486 #, c-format msgid "Restore From Tape" msgstr "Restaurar Dende unha Cinta" #: standalone/drakbackup:3486 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Insira a cinta ca etiqueta de volume %s\n" "no dispositivo da unidade de cinta %s" #: standalone/drakbackup:3488 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "A etiqueta da cinta non é correcta. A etiqueta da cinta é %s." #: standalone/drakbackup:3499 #, c-format msgid "Restore Via Network" msgstr "Restaurar Dende a Rede" #: standalone/drakbackup:3499 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Restaurar Dende a Rede usando o Protocolo: %s" #: standalone/drakbackup:3500 #, c-format msgid "Host Name" msgstr "Nome de Máquina" #: standalone/drakbackup:3501 #, c-format msgid "Host Path or Module" msgstr "" #: standalone/drakbackup:3508 #, c-format msgid "Password required" msgstr "Contrasinal requirido" #: standalone/drakbackup:3514 #, c-format msgid "Username required" msgstr "Nome de usuario requirido" #: standalone/drakbackup:3517 #, c-format msgid "Hostname required" msgstr "Cómpre un nome de máquina" #: standalone/drakbackup:3522 #, c-format msgid "Path or Module required" msgstr "" #: standalone/drakbackup:3535 #, c-format msgid "Files Restored..." msgstr "Ficheiros Restaurados..." #: standalone/drakbackup:3538 #, c-format msgid "Restore Failed..." msgstr "Fallo durante a Restauración" #: standalone/drakbackup:3556 #, c-format msgid "%s not retrieved..." msgstr "%s non recuperado..." #: standalone/drakbackup:3777 standalone/drakbackup:3846 #, c-format msgid "Search for files to restore" msgstr "Buscar ficheiros para restaurar" #: standalone/drakbackup:3781 #, c-format msgid "Restore all backups" msgstr "Restaurar tódalas copias de seguridade" #: standalone/drakbackup:3789 #, c-format msgid "Custom Restore" msgstr "Restauración Personalizada" #: standalone/drakbackup:3793 standalone/drakbackup:3842 #, c-format msgid "Restore From Catalog" msgstr "Restaurar Dende un Catálogo" #: standalone/drakbackup:3814 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Non se atoparon copias de seguridade para restaurar...\n" #: standalone/drakbackup:3815 #, c-format msgid "Verify that %s is the correct path" msgstr "Verificar que %s é a ruta correcta" #: standalone/drakbackup:3816 #, c-format msgid " and the CD is in the drive" msgstr " e que o CD está na unidade" #: standalone/drakbackup:3818 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3834 #, c-format msgid "CD in place - continue." msgstr "" #: standalone/drakbackup:3839 #, c-format msgid "Browse to new restore repository." msgstr "" #: standalone/drakbackup:3840 #, c-format msgid "Directory To Restore From" msgstr "Directorio Dende o que Restaurar" #: standalone/drakbackup:3876 #, c-format msgid "Restore Progress" msgstr "Progreso da Restauración" #: standalone/drakbackup:3987 #, c-format msgid "Build Backup" msgstr "Construir Copia de Seguridade" #: standalone/drakbackup:4020 standalone/drakbackup:4340 #, c-format msgid "Restore" msgstr "Restaurar" #: standalone/drakbackup:4108 standalone/harddrake2:481 #, c-format msgid "The following packages need to be installed:\n" msgstr "Cómpre instala-los seguintes paquetes:\n" #: standalone/drakbackup:4135 #, c-format msgid "Please select data to restore..." msgstr "Seleccione os datos a restaurar..." #: standalone/drakbackup:4175 #, c-format msgid "Backup system files" msgstr "Facer copia de seguridade dos ficheiros do sistema" #: standalone/drakbackup:4178 #, c-format msgid "Backup user files" msgstr "Facer copia de seguridade dos ficheiros de usuario" #: standalone/drakbackup:4181 #, c-format msgid "Backup other files" msgstr "Facer copia de seguridade doutros ficheiros" #: standalone/drakbackup:4184 standalone/drakbackup:4218 #, c-format msgid "Total Progress" msgstr "Progreso Total" #: standalone/drakbackup:4210 #, c-format msgid "Sending files by FTP" msgstr "Enviando ficheiros por FTP" #: standalone/drakbackup:4213 #, c-format msgid "Sending files..." msgstr "Enviando ficheiros..." #: standalone/drakbackup:4283 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Configuración da rede" #: standalone/drakbackup:4288 #, c-format msgid "View Backup Configuration." msgstr "Ve-la Configuración da Copia de Seguridade." #: standalone/drakbackup:4314 #, c-format msgid "Wizard Configuration" msgstr "Configuración do Asistente" #: standalone/drakbackup:4319 #, c-format msgid "Advanced Configuration" msgstr "Configuración Avanzada" #: standalone/drakbackup:4324 #, c-format msgid "View Configuration" msgstr "Ve-la Configuración" #: standalone/drakbackup:4328 #, c-format msgid "View Last Log" msgstr "Ve-lo Último Log" #: standalone/drakbackup:4333 #, c-format msgid "Backup Now" msgstr "Facer Copia de Seguridade Agora" #: standalone/drakbackup:4337 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Non se atopou o ficheiro de configuración\n" "prema en Asistente ou Avanzada." #: standalone/drakbackup:4357 standalone/drakbackup:4360 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:64 #, c-format msgid "Graphical boot theme selection" msgstr "Selección do tema do arrinque gráfico" #: standalone/drakboot:64 #, c-format msgid "System mode" msgstr "" #: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:189 #: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/_Ficheiro" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/Ficheiro/_Saír" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:191 #: standalone/logdrake:76 standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:148 #, c-format msgid "Install themes" msgstr "Instalar temas" #: standalone/drakboot:149 #, c-format msgid "Create new theme" msgstr "Crear novo tema" #: standalone/drakboot:161 #, c-format msgid "Use graphical boot" msgstr "Usar arrinque gráfico" #: standalone/drakboot:166 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:167 #, c-format msgid "Do you want to configure it now?" msgstr "Desexa configuralo agora?" #: standalone/drakboot:177 #, c-format msgid "Theme" msgstr "Tema" #: standalone/drakboot:180 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Amosa-lo tema por\n" "debaixo da consola" #: standalone/drakboot:189 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Lanza-lo ambiente gráfico ó inicia-lo sistema" #: standalone/drakboot:197 #, c-format msgid "No, I do not want autologin" msgstr "Non, non quero login automático" #: standalone/drakboot:198 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Si, quero login automático con este (usuario, escritorio)" #: standalone/drakboot:201 #, c-format msgid "Default user" msgstr "Usuario por omisión" #: standalone/drakboot:202 #, c-format msgid "Default desktop" msgstr "Escritorio por omisión" #: standalone/drakboot:310 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, c-format msgid "Mandrakelinux Bug Report Tool" msgstr "Ferramenta de Informe de Erros de Mandrakelinux" #: standalone/drakbug:46 #, c-format msgid "Mandrakelinux Control Center" msgstr "Centro de Control de Mandrakelinux" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "Ferramenta de sincronización" #: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 #: standalone/drakbug:150 standalone/drakbug:154 #, fuzzy, c-format msgid "Standalone Tools" msgstr "Ferramentas de consola" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:51 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Control Remoto" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Xestor de Software" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "Ferramenta de Migración de Windows" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Asistentes de Configuración" #: standalone/drakbug:81 #, c-format msgid "Select Mandrakesoft Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" "ou Nome da Aplicación\n" "(ou Ruta Completa):" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Atopa-lo Paquete" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Paquete: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Kernel:" #: standalone/drakbug:100 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" "Para enviar un informe de erros, prema no botón informar. \n" "Isto abrirá unha ventá do navegador web en %s onde atopará un formulario " "para encher. A información que se amosa enriba transferirase a ese " "servidor. \n" "Cousas útiles que se poden incluir no seu informe son a saída de lspci, a " "versión do kernel, e /proc/cpuinfo." #: standalone/drakbug:106 #, c-format msgid "Report" msgstr "Informar" #: standalone/drakbug:163 #, c-format msgid "Not installed" msgstr "Non instalado" #: standalone/drakbug:175 #, c-format msgid "Package not installed" msgstr "Paquete non instalado" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "non definido" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "Cambia-la Zona Horaria" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Zona Horaria - DrakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "¿O reloxo interno usa a hora GMT?" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Interface de rede" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "O seu ordenador pode sincroniza-lo seu reloxo\n" "ca hora dun servidor remoto usando NTP" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Servidor:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "Non se puido sincronizar con %s." #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Reiniciar" #: standalone/drakclock:224 #, fuzzy, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "Cómpre instalar o paquete ntp para\n" "activar o Network Time Protocol\n" "\n" "Desexa instalar ntp?" #: standalone/drakconnect:86 #, c-format msgid "Network configuration (%d adapters)" msgstr "Configuración da rede (%d adaptadores)" #: standalone/drakconnect:97 standalone/drakconnect:822 #: standalone/drakroam:159 #, c-format msgid "Gateway:" msgstr "Pasarela:" #: standalone/drakconnect:97 standalone/drakconnect:822 #, c-format msgid "Interface:" msgstr "Interface:" #: standalone/drakconnect:101 standalone/net_monitor:122 #, c-format msgid "Wait please" msgstr "Agarde un chisco" #: standalone/drakconnect:117 #, c-format msgid "Interface" msgstr "Interface" #: standalone/drakconnect:117 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "Estado" #: standalone/drakconnect:134 #, c-format msgid "Hostname: " msgstr "Nome de máquina: " #: standalone/drakconnect:136 #, c-format msgid "Configure hostname..." msgstr "Configura-lo nome da máquina..." #: standalone/drakconnect:150 standalone/drakconnect:878 #, c-format msgid "LAN configuration" msgstr "Configuración da LAN" #: standalone/drakconnect:155 #, c-format msgid "Configure Local Area Network..." msgstr "Configura-la Rede de Área Local..." #: standalone/drakconnect:163 standalone/drakconnect:247 #: standalone/drakconnect:251 #, c-format msgid "Apply" msgstr "Aplicar" #: standalone/drakconnect:198 #, c-format msgid "Manage connections" msgstr "Xestiona-las conexións" #: standalone/drakconnect:225 #, c-format msgid "Device selected" msgstr "Dispositivo seleccionado" #: standalone/drakconnect:307 #, c-format msgid "IP configuration" msgstr "Configuración do IP" #: standalone/drakconnect:346 #, c-format msgid "DNS servers" msgstr "Servidores DNS" #: standalone/drakconnect:354 #, c-format msgid "Search Domain" msgstr "Buscar Dominio" #: standalone/drakconnect:362 #, c-format msgid "static" msgstr "estático" #: standalone/drakconnect:362 standalone/drakroam:140 #, c-format msgid "DHCP" msgstr "DHCP" #: standalone/drakconnect:526 #, fuzzy, c-format msgid "Flow control" msgstr "G" #: standalone/drakconnect:527 #, fuzzy, c-format msgid "Line termination" msgstr "Estación Internet" #: standalone/drakconnect:538 #, fuzzy, c-format msgid "Modem timeout" msgstr "Tempo de espera do módem" #: standalone/drakconnect:542 #, c-format msgid "Use lock file" msgstr "Usar ficheiro lock" #: standalone/drakconnect:544 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:547 #, fuzzy, c-format msgid "Busy wait" msgstr "Saír" #: standalone/drakconnect:552 #, c-format msgid "Modem sound" msgstr "Son do módem" #: standalone/drakconnect:553 #, c-format msgid "Enable" msgstr "Activar" #: standalone/drakconnect:553 #, c-format msgid "Disable" msgstr "Desactivar" #: standalone/drakconnect:604 standalone/harddrake2:49 #, c-format msgid "Media class" msgstr "" #: standalone/drakconnect:605 standalone/drakfloppy:136 #, c-format msgid "Module name" msgstr "Nome do módulo" #: standalone/drakconnect:606 #, c-format msgid "Mac Address" msgstr "Enderezo Mac" #: standalone/drakconnect:607 standalone/harddrake2:27 #: standalone/harddrake2:119 #, c-format msgid "Bus" msgstr "Bus" #: standalone/drakconnect:608 standalone/harddrake2:33 #, c-format msgid "Location on the bus" msgstr "Localización no bus" #: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Non se detectou ningún adaptador de rede ethernet no seu sistema. Execute a " "ferramenta de configuración de hardware." #: standalone/drakconnect:715 #, c-format msgid "Remove a network interface" msgstr "Eliminar unha interface de rede" #: standalone/drakconnect:719 #, c-format msgid "Select the network interface to remove:" msgstr "Seleccione unha interface de rede para eliminala:" #: standalone/drakconnect:751 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Ocorreu un erro mentres se eliminaba a interface de rede \"%s\":\n" "\n" "%s" #: standalone/drakconnect:752 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "Noraboa, a interface de rede \"%s\" eliminouse con éxito" #: standalone/drakconnect:768 #, c-format msgid "No IP" msgstr "Sen IP" #: standalone/drakconnect:769 #, c-format msgid "No Mask" msgstr "Sen Máscara" #: standalone/drakconnect:770 standalone/drakconnect:949 #, c-format msgid "up" msgstr "arriba" #: standalone/drakconnect:770 standalone/drakconnect:949 #, c-format msgid "down" msgstr "abaixo" #: standalone/drakconnect:812 standalone/net_monitor:471 #, c-format msgid "Connected" msgstr "Conectado" #: standalone/drakconnect:812 standalone/net_monitor:471 #, c-format msgid "Not connected" msgstr "Non conectado" #: standalone/drakconnect:814 #, c-format msgid "Disconnect..." msgstr "Desconectar..." #: standalone/drakconnect:814 #, c-format msgid "Connect..." msgstr "Conectar..." #: standalone/drakconnect:843 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Advertencia, detectouse outra conexión á Internet, pode estar usando a súa " "rede" #: standalone/drakconnect:874 #, c-format msgid "Deactivate now" msgstr "Desactivar agora" #: standalone/drakconnect:874 #, c-format msgid "Activate now" msgstr "Activar agora" #: standalone/drakconnect:882 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Non ten ningunha interface configurada.\n" "Configúreas primeiro premendo en 'Configurar'" #: standalone/drakconnect:896 #, c-format msgid "LAN Configuration" msgstr "Configuración da LAN" #: standalone/drakconnect:908 #, c-format msgid "Adapter %s: %s" msgstr "Adaptador %s: %s" #: standalone/drakconnect:917 #, c-format msgid "Boot Protocol" msgstr "Protocolo de Arrinque" #: standalone/drakconnect:918 #, c-format msgid "Started on boot" msgstr "Iniciado ó arrincar" #: standalone/drakconnect:954 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrakelinux Control Center" msgstr "" "Esta interface ainda non foi configurada.\n" "Execute o asistente \"Engadir unha interface\" dende o\n" "Centro de Control de Mandrakelinux" #: standalone/drakconnect:1009 standalone/net_applet:61 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandrakelinux Control Center" msgstr "" "Non ten configurada ningunha conexión á Internet.\n" "Execute o asistente \"%s\" dende o\n" "Centro de Control de Mandrakelinux" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:1010 standalone/net_applet:62 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Configurar unha nova interface de rede (LAN, RDSI, ADSL, ...)" #: standalone/drakconnect:1017 #, c-format msgid "Internet connection configuration" msgstr "Configuración da conexión á Internet" #: standalone/drakconnect:1035 #, c-format msgid "Third DNS server (optional)" msgstr "Terceiro Servidor DNS (opcional)" #: standalone/drakconnect:1057 #, c-format msgid "Internet Connection Configuration" msgstr "Configuración da Conexión á Internet" #: standalone/drakconnect:1058 #, c-format msgid "Internet access" msgstr "Acceso á Internet" #: standalone/drakconnect:1060 standalone/net_monitor:101 #, c-format msgid "Connection type: " msgstr "Tipo de conexión: " #: standalone/drakconnect:1063 #, c-format msgid "Status:" msgstr "Estado:" #: standalone/drakedm:34 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "GDM (GNOME Display Manager)" #: standalone/drakedm:35 #, c-format msgid "KDM (KDE Display Manager)" msgstr "KDM (KDE Display Manager)" #: standalone/drakedm:36 #, c-format msgid "MdkKDM (Mandrakelinux Display Manager)" msgstr "MdkKDM (Mandrakelinux Display Manager)" #: standalone/drakedm:37 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X Display Manager)" #: standalone/drakedm:55 #, c-format msgid "Choosing a display manager" msgstr "" #: standalone/drakedm:56 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: standalone/drakedm:79 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "Xa se fixo o cambio, ¿desexa reinicia-lo servicio dm?" #: standalone/drakedm:80 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" "Vai pechar tódolos programas que se están executando e perder a súa sesión " "actual. ¿Está seguro de que desexa reiniciar o servicio dm?" #: standalone/drakfloppy:41 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:78 #, c-format msgid "Boot disk creation" msgstr "Creación do disco de arrinque" #: standalone/drakfloppy:79 #, c-format msgid "General" msgstr "Xeral" #: standalone/drakfloppy:82 standalone/harddrake2:146 #, c-format msgid "Device" msgstr "Dispositivo" #: standalone/drakfloppy:88 #, c-format msgid "Kernel version" msgstr "Versión do kernel" #: standalone/drakfloppy:103 #, c-format msgid "Preferences" msgstr "Preferencias" #: standalone/drakfloppy:117 #, c-format msgid "Advanced preferences" msgstr "Preferencias avanzadas" #: standalone/drakfloppy:136 #, c-format msgid "Size" msgstr "Tamaño" #: standalone/drakfloppy:139 #, c-format msgid "Mkinitrd optional arguments" msgstr "Argumentos opcionais para mkinitrd" #: standalone/drakfloppy:141 #, c-format msgid "force" msgstr "forzar" #: standalone/drakfloppy:142 #, c-format msgid "omit raid modules" msgstr "omiti-los módulos raid" #: standalone/drakfloppy:143 #, c-format msgid "if needed" msgstr "se for necesario" #: standalone/drakfloppy:144 #, c-format msgid "omit scsi modules" msgstr "omiti-los módulos scsi" #: standalone/drakfloppy:147 #, c-format msgid "Add a module" msgstr "Engadir un módulo" #: standalone/drakfloppy:156 #, c-format msgid "Remove a module" msgstr "Quitar un módulo" #: standalone/drakfloppy:291 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Asegúrese de que hai un soporte no dispositivo %s" #: standalone/drakfloppy:297 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Non hai soporte ou está protexido contra a escritura, no dispositivo %s.\n" "Insira un." #: standalone/drakfloppy:300 #, c-format msgid "Unable to fork: %s" msgstr "" #: standalone/drakfloppy:303 #, c-format msgid "Floppy creation completed" msgstr "Completouse a creación do disquete" #: standalone/drakfloppy:303 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "A creación do disquete de arrinque completouse con éxito\n" #. -PO: Do not alter the and tags #: standalone/drakfloppy:308 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Non se puido pechar de xeito correcto o mkbootdisk:\n" "\n" "%s" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "Busca-las fontes instaladas" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "Deseleccionar as fontes instaladas" #: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "analisar tódalas fontes" #: standalone/drakfont:209 #, c-format msgid "No fonts found" msgstr "Non se atoparon fontes" #: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326 #: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393 #: standalone/drakfont:411 standalone/drakfont:425 #, c-format msgid "done" msgstr "feito" #: standalone/drakfont:222 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "Non se puido atopar ningunha fonte nas particións montadas" #: standalone/drakfont:257 #, c-format msgid "Reselect correct fonts" msgstr "" #: standalone/drakfont:260 #, c-format msgid "Could not find any font.\n" msgstr "Non se puido atopar ningunha fonte.\n" #: standalone/drakfont:270 #, c-format msgid "Search for fonts in installed list" msgstr "" #: standalone/drakfont:295 #, c-format msgid "%s fonts conversion" msgstr "" #: standalone/drakfont:324 #, c-format msgid "Fonts copy" msgstr "Copia das fontes" #: standalone/drakfont:327 #, c-format msgid "True Type fonts installation" msgstr "Instalación de fontes True Type" #: standalone/drakfont:334 #, fuzzy, c-format msgid "please wait during ttmkfdir..." msgstr "Agarde mentres ttmkfdir..." #: standalone/drakfont:335 #, c-format msgid "True Type install done" msgstr "Rematouse a instalación de True Type" #: standalone/drakfont:341 standalone/drakfont:356 #, c-format msgid "type1inst building" msgstr "" #: standalone/drakfont:350 #, c-format msgid "Ghostscript referencing" msgstr "" #: standalone/drakfont:360 #, c-format msgid "Suppress Temporary Files" msgstr "Elimina-los Ficheiros Temporais" #: standalone/drakfont:363 #, c-format msgid "Restart XFS" msgstr "Reiniciar XFS" #: standalone/drakfont:409 standalone/drakfont:419 #, c-format msgid "Suppress Fonts Files" msgstr "Elimina-los Ficheiros de Fontes" #: standalone/drakfont:421 #, fuzzy, c-format msgid "xfs restart" msgstr "restrinxir" #: standalone/drakfont:429 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "Lista de Fontes" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "Acerca de" #: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726 #, c-format msgid "Uninstall" msgstr "Desinstalar" #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "Importar" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:511 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" "Copyright © 2001-2002 de Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (versión orixinal)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " #: standalone/drakfont:520 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" #: standalone/drakfont:536 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:555 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Elixa as aplicacións que soportarán as fontes:" #: standalone/drakfont:556 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: standalone/drakfont:566 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:567 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:568 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:569 #, c-format msgid "Generic Printers" msgstr "Impresoras Xenéricas" #: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Seleccione o directorio ou ficheiro de fontes e prema en 'Engadir'" #: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "Selección do Ficheiro" #: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "" #: standalone/drakfont:653 #, c-format msgid "Import fonts" msgstr "Importar fontes" #: standalone/drakfont:658 #, c-format msgid "Install fonts" msgstr "Instalar fontes" #: standalone/drakfont:693 #, c-format msgid "click here if you are sure." msgstr "prema aqui se está segur@." #: standalone/drakfont:695 #, c-format msgid "here if no." msgstr "aqui se non." #: standalone/drakfont:734 #, c-format msgid "Unselected All" msgstr "Deseleccionar Todo" #: standalone/drakfont:737 #, c-format msgid "Selected All" msgstr "Seleccionadas Todas" #: standalone/drakfont:740 #, c-format msgid "Remove List" msgstr "Elimina-la Lista" #: standalone/drakfont:751 standalone/drakfont:770 #, c-format msgid "Importing fonts" msgstr "Importando fontes" #: standalone/drakfont:755 standalone/drakfont:775 #, c-format msgid "Initial tests" msgstr "Probas iniciais" #: standalone/drakfont:756 #, c-format msgid "Copy fonts on your system" msgstr "Copia-las fontes no sistema" #: standalone/drakfont:757 #, c-format msgid "Install & convert Fonts" msgstr "Instalar & converti-las fontes" #: standalone/drakfont:758 #, c-format msgid "Post Install" msgstr "Despois de Instalar" #: standalone/drakfont:776 #, c-format msgid "Remove fonts on your system" msgstr "Eliminar fontes do sistema" #: standalone/drakfont:777 #, c-format msgid "Post Uninstall" msgstr "Despois de Desinstalar" #: standalone/drakgw:58 standalone/drakgw:191 #, c-format msgid "Internet Connection Sharing" msgstr "Compartimento da Conexión á Internet" #: standalone/drakgw:111 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Sentímolo. só soportamos kernels da serie 2.4 e superiores." #: standalone/drakgw:122 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "O Compartimento da Conexión á Internet está desactivado" #: standalone/drakgw:123 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "A configuración do compartimento da conexión á Internet xa foi feita.\n" "Actualmente está desactivado.\n" "\n" "¿Qué desexa facer?" #: standalone/drakgw:127 standalone/drakvpn:127 #, c-format msgid "enable" msgstr "activar" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "volver a configurar" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735 #, c-format msgid "dismiss" msgstr "" #: standalone/drakgw:134 #, c-format msgid "Enabling servers..." msgstr "Activando os servidores..." #: standalone/drakgw:146 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Agora o Compartimento da Conexión á Internet está activado." #: standalone/drakgw:149 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "O Compartimento da Conexión á Internet está activado" #: standalone/drakgw:150 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "A configuración do compartimento da conexión á Internet xa foi feita.\n" "Actualmente está activado.\n" "\n" "¿Qué desexa facer?" #: standalone/drakgw:154 standalone/drakvpn:101 #, c-format msgid "disable" msgstr "desactivar" #: standalone/drakgw:157 #, c-format msgid "Disabling servers..." msgstr "Desactivando os servidores..." #: standalone/drakgw:172 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Agora o Compartimento da Conexión á Internet está desactivado." #: standalone/drakgw:192 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Está a piques de configurar o seu ordenador para que comparta a conexión á " "Internet.\n" "Con esta funcionalidade, outros ordenadores da súa rede local poden usa-la " "conexión á Internet deste ordenador.\n" "\n" "Asegúrese de que configurou o seu acceso á Rede/Internet co drakconnect " "antes de continuar.\n" "\n" "Nota: necesita un Adaptador de Rede dedicado para configurar unha Rede de " "Área Local (LAN)." #: standalone/drakgw:236 #, c-format msgid "Interface %s (using module %s)" msgstr "Interface %s (usando o módulo %s)" #: standalone/drakgw:237 #, c-format msgid "Interface %s" msgstr "Interface %s" #: standalone/drakgw:246 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "¡Non hai ningún adaptador de rede no seu sistema!" #: standalone/drakgw:253 #, c-format msgid "Network interface" msgstr "Interface de rede" #: standalone/drakgw:254 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Só hai un adaptador de rede configurado no seu sistema:\n" "\n" "%s\n" "\n" "Vaise configura-la Rede de Área Local usando ese adaptador." #: standalone/drakgw:260 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Escolla a interface de rede" #: standalone/drakgw:261 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Escolla o adaptador de rede que vai estar conectado á Rede de Área Local." #: standalone/drakgw:290 #, c-format msgid "Network interface already configured" msgstr "A interface de rede xa está configurada" #: standalone/drakgw:291 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Advertencia, o adaptador de rede (%s) xa está configurado.\n" "\n" "¿Desexa reconfiguralo automáticamente?\n" "\n" "Pode facelo a man pero necesita saber qué é o que está facendo." #: standalone/drakgw:296 #, c-format msgid "Automatic reconfiguration" msgstr "Reconfiguración automática" #: standalone/drakgw:296 #, c-format msgid "No (experts only)" msgstr "Non (só expertos)" #: standalone/drakgw:297 #, c-format msgid "Show current interface configuration" msgstr "Amosa-la configuración actual da interface" #: standalone/drakgw:298 #, c-format msgid "Current interface configuration" msgstr "Configuración actual da interface" #: standalone/drakgw:299 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: standalone/drakgw:312 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: standalone/drakgw:319 #, c-format msgid "Local Network adress" msgstr "Enderezo da Rede Local" #: standalone/drakgw:323 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "Configuración do Servidor DHCP.\n" "\n" "Aqui pode seleccionar diferentes opcións para a configuración do servidor " "DHCP.\n" "Se non sabe o significado dunha opción, déixeo como está." #: standalone/drakgw:327 #, c-format msgid "(This) DHCP Server IP" msgstr "IP deste servidor DHCP" #: standalone/drakgw:328 #, c-format msgid "The DNS Server IP" msgstr "IP do Servidor DNS" #: standalone/drakgw:329 #, c-format msgid "The internal domain name" msgstr "Nome do dominio interno" #: standalone/drakgw:330 #, c-format msgid "The DHCP start range" msgstr "O comezo do rango DHCP" #: standalone/drakgw:331 #, c-format msgid "The DHCP end range" msgstr "O remate do rango DHCP" #: standalone/drakgw:332 #, c-format msgid "The default lease (in seconds)" msgstr "" #: standalone/drakgw:333 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: standalone/drakgw:334 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Volver a configura-la interface e o servidor DHCP" #: standalone/drakgw:341 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: standalone/drakgw:351 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "" "¡Atopouse un conflicto potencial de enderezos da LAN na configuración actual " "de %s!\n" #: standalone/drakgw:361 #, c-format msgid "Configuring..." msgstr "Configurando..." #: standalone/drakgw:362 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" "Configurando os scripts, instalando o software, iniciando os servidores..." #: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278 #, c-format msgid "Problems installing package %s" msgstr "Problemas ó instala-lo paquete %s" #: standalone/drakgw:598 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Xa está todo configurado.\n" "Agora pode compartir a conexión á Internet con outros ordenadores da Rede " "Local, usando a configuración automática de rede (DHCP) e un\n" "servidor Proxy de Caché Transparente (SQUID)." #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 Mandrakesoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Copyright © 2003-2004 Mandrakesoft.\n" "Isto é software libre e pode ser redistribuido baixo os termos da GNU GPL.\n" "\n" "Uso: \n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - amosa esta axuda\n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, c-format msgid "Mandrakelinux Help Center" msgstr "Centro de Axuda de Linux Mandrake" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakperm:22 #, c-format msgid "System settings" msgstr "Configuración do sistema" #: standalone/drakperm:23 #, c-format msgid "Custom settings" msgstr "Configuración personalizada" #: standalone/drakperm:24 #, c-format msgid "Custom & system settings" msgstr "Configuracións do sistema & personalizada" #: standalone/drakperm:44 #, c-format msgid "Editable" msgstr "Editable" #: standalone/drakperm:49 standalone/drakperm:329 #, c-format msgid "Path" msgstr "Ruta" #: standalone/drakperm:49 standalone/drakperm:251 #, c-format msgid "User" msgstr "Usuario" #: standalone/drakperm:49 standalone/drakperm:251 #, c-format msgid "Group" msgstr "Grupo" #: standalone/drakperm:49 standalone/drakperm:341 #, c-format msgid "Permissions" msgstr "Permisos" #: standalone/drakperm:58 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "Edita-la regra actual" #: standalone/drakperm:107 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Arriba" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "Move-la regra seleccionada un nivel arriba" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Abaixo" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "Move-la regra seleccionada un nivel abaixo" #: standalone/drakperm:123 #, c-format msgid "Add a rule" msgstr "Engadir unha regra" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "Engadir unha nova regra ó final" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "Elimina-la regra seleccionada" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "Editar" #: standalone/drakperm:243 #, c-format msgid "browse" msgstr "explorar" #: standalone/drakperm:248 #, c-format msgid "user" msgstr "usuario" #: standalone/drakperm:248 #, c-format msgid "group" msgstr "grupo" #: standalone/drakperm:248 #, c-format msgid "other" msgstr "outro" #: standalone/drakperm:253 #, c-format msgid "Read" msgstr "Lectura" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:256 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Permitirlle a \"%s\" le-lo ficheiro" #: standalone/drakperm:260 #, c-format msgid "Write" msgstr "Escritura" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:263 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Permitirlle a \"%s\" escribir no ficheiro" #: standalone/drakperm:267 #, c-format msgid "Execute" msgstr "Execución" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:270 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Permitirlle a \"%s\" executa-lo ficheiro" #: standalone/drakperm:273 #, c-format msgid "Sticky-bit" msgstr "Sticky-bit" #: standalone/drakperm:273 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Usado para o directorio:\n" "neste directorio só o propietario do directorio ou do ficheiro pode eliminalo" #: standalone/drakperm:274 #, c-format msgid "Set-UID" msgstr "Set-UID" #: standalone/drakperm:274 #, c-format msgid "Use owner id for execution" msgstr "Usa-lo id do propietario para a execución" #: standalone/drakperm:275 #, c-format msgid "Set-GID" msgstr "Set-GID" #: standalone/drakperm:275 #, c-format msgid "Use group id for execution" msgstr "Usa-lo id do grupo para a execución" #: standalone/drakperm:293 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Usuario: " #: standalone/drakperm:295 #, c-format msgid "Group:" msgstr "Grupo: " #: standalone/drakperm:299 #, c-format msgid "Current user" msgstr "Usuario actual" #: standalone/drakperm:300 #, c-format msgid "When checked, owner and group will not be changed" msgstr "" "Cando está seleccionado, non se poden cambia-lo propietario nin o grupo" #: standalone/drakperm:310 #, c-format msgid "Path selection" msgstr "Selección da ruta" #: standalone/drakperm:335 #, c-format msgid "Property" msgstr "Propiedade" #: standalone/drakpxe:55 #, c-format msgid "PXE Server Configuration" msgstr "Configuración do Servidor PXE" #: standalone/drakpxe:111 #, c-format msgid "Installation Server Configuration" msgstr "Configuración do Servidor de Instalación" #: standalone/drakpxe:112 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Está a piques de configurar o seu ordenador para que comparta a conexión á " "Internet.\n" "\n" "Nota: necesita un adaptador de rede dedicado para configurar unha rede de " "área local (LAN)." #: standalone/drakpxe:143 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Escolla a interface de rede que usará o servidor DHCP." #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "Interface %s (na rede %s)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "O IP inicial de DHCP" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "O IP final de DHCP" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Indique onde está a imaxe de instalación.\n" "\n" "Se non hai ningún directorio, copie o contido do CD ou DVD.\n" "\n" #: standalone/drakpxe:192 #, c-format msgid "Installation image directory" msgstr "Directorio da imaxe de instalación" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "Non se atopou ningunha imaxe" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Non se atopou ningunha imaxe de CD ou DVD, copie o programa de instalación e " "os ficheiros rpm." #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Indique onde está o ficheiro auto_install.cfg.\n" "\n" "Déixeo en branco se non quere usa-lo modo de instalación automática.\n" "\n" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "Localización do ficheiro auto_install.cfg" #: standalone/drakroam:137 #, c-format msgid "ESSID" msgstr "" #: standalone/drakroam:138 standalone/drakvpn:1143 #, c-format msgid "Mode" msgstr "Modo" #: standalone/drakroam:139 standalone/harddrake2:96 #, c-format msgid "Channel" msgstr "Canle" #: standalone/drakroam:141 #, c-format msgid "Key" msgstr "" #: standalone/drakroam:157 #, c-format msgid "Network:" msgstr "Rede:" #: standalone/drakroam:158 #, c-format msgid "IP:" msgstr "IP:" #: standalone/drakroam:160 #, c-format msgid "Mode:" msgstr "Modo:" #: standalone/drakroam:161 #, c-format msgid "Encryption:" msgstr "Cifraxe:" #: standalone/drakroam:162 #, c-format msgid "Signal:" msgstr "" #: standalone/drakroam:176 #, c-format msgid "Roaming" msgstr "" #: standalone/drakroam:179 standalone/drakroam:258 #, c-format msgid "Roaming: %s" msgstr "" #: standalone/drakroam:179 standalone/drakroam:257 standalone/drakvpn:1061 #: standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "off" msgstr "apagado" #: standalone/drakroam:186 #, c-format msgid "Scan interval (sec): " msgstr "" #: standalone/drakroam:189 #, c-format msgid "Set" msgstr "Conxunto" #: standalone/drakroam:194 #, c-format msgid "Known Networks (Drag up/down or edit)" msgstr "" #: standalone/drakroam:202 #, c-format msgid "Connect" msgstr "Conectar" #: standalone/drakroam:210 #, c-format msgid "Available Networks" msgstr "" #: standalone/drakroam:221 #, c-format msgid "Rescan" msgstr "" #: standalone/drakroam:225 #, c-format msgid "Status" msgstr "Estado" #: standalone/drakroam:232 #, c-format msgid "Disconnect" msgstr "Desconectar" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:233 standalone/net_applet:90 #: standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "Actualizar" #: standalone/drakroam:257 standalone/drakvpn:1061 standalone/drakvpn:1077 #: standalone/drakvpn:1090 #, c-format msgid "on" msgstr "prendido" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "TODO" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "LOCAL" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "Ignorar" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:154 standalone/harddrake2:207 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Descrición dos campos:\n" "\n" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "(valor por defecto: %s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "Nivel de Seguridade:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "Administrador de Seguridade:" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "Opcións básicas" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "Opcións de Rede" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "Opcións do Sistema" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "Comprobacións Periódicas" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "Agarde, establecendo o nivel de seguridade..." #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "Agarde, establecendo as opcións de seguridade..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "¡Non se detectou ningunha Tarxeta de Son!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Non se detectou ningunha Tarxeta de Son na máquina. Verifique que hai " "unhaTarxeta de Son soportada por Linux conectada correctamente.\n" "\n" "\n" "Pode visita-la nosa base de datos de hardware en:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Nota: se ten unha tarxeta de son ISA PnP, terá que usar os programas " "alsaconf ou sndconfig. Simplemente escriba \"alsaconf\" ou \"sndconfig\" " "nunha consola." #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "Necesítase o paquete 'ImageMagick' para completa-la configuración.\n" "Prema en \"Aceptar\" para instalar 'ImageMagick' ou \"Cancelar\" para saír" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "primeiro paso da creación" #: standalone/draksplash:71 #, c-format msgid "final resolution" msgstr "resolución final" #: standalone/draksplash:72 #, c-format msgid "choose image file" msgstr "escolla o ficheiro de imaxe" #: standalone/draksplash:73 #, c-format msgid "Theme name" msgstr "Nome do tema" #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "Explorar" #: standalone/draksplash:93 standalone/draksplash:158 #, c-format msgid "Configure bootsplash picture" msgstr "Configurar a imaxe de bootsplash" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "ancho do texto" #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "" #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr "o ancho da barra de progreso" #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr "a altura da barra de progreso" #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr "a cor da barra de progreso" #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "Vista Previa" #: standalone/draksplash:121 #, c-format msgid "Save theme" msgstr "Garda-lo tema" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "Escolle-la cor" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "Amosa-lo logo na Consola" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: standalone/draksplash:161 standalone/draksplash:316 #: standalone/draksplash:460 #, c-format msgid "Notice" msgstr "Aviso" #: standalone/draksplash:161 standalone/draksplash:316 #, c-format msgid "This theme does not yet have a bootsplash in %s!" msgstr "" #: standalone/draksplash:167 #, c-format msgid "choose image" msgstr "Escolle-la imaxe" #: standalone/draksplash:217 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: standalone/draksplash:441 #, c-format msgid "ProgressBar color selection" msgstr "Selección da cor da barra de progreso" #: standalone/draksplash:460 #, c-format msgid "You must choose an image file first!" msgstr "¡Debe escoller un ficheiro de imaxe primeiro!" #: standalone/draksplash:465 #, c-format msgid "Generating preview..." msgstr "Xerando a vista previa..." #. -PO: First %s is theme name, second %s (in parenthesis) is resolution #: standalone/draksplash:503 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #. -PO: Do not alter the and tags #: standalone/draksplash:509 #, c-format msgid "" "The image \"%s\" cannot be load due to the following issue:\n" "\n" "%s" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "Conectado a través dun porto serie ou un cable usb" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "Engadir un dispositivo SAI" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "Benvid@ á utilidade de configuración de SAI.\n" "\n" "Aqui poderá engadir un novo SAI ó seu sistema.\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" "Imos engadir un dispositivo SAI.\n" "\n" "Prefire detectar automáticamente os dispositivos SAI conectados a esta " "máquina ou desexa seleccionalos a man?" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "Detección automática" #: standalone/drakups:101 standalone/harddrake2:236 #, c-format msgid "Detection in progress" msgstr "Detectando" #: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "Noraboa" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "O asistente engadiu con éxito os seguintes dispositivos SAI:" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "Non se atoparon novos dispositivos SAI" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "Configuración do driver SAI" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "Seleccione o modelo do seu SAI." #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "Fabricante / Modelo:" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" "Estamos configurando o SAI \"%s\" dende \"%s\".\n" "Introduza o seu nome, o seu controlador e o seu porto." #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Nome:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "O nome do seu SAI" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "O driver que xestiona o seu SAI" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Porto:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "O porto ó que está conectado o seu SAI" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "O asistente configurou con éxito o novo dispositivo SAI \"%s\"." #: standalone/drakups:250 #, c-format msgid "UPS devices" msgstr "Dispositivos SAI" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:84 standalone/harddrake2:110 #: standalone/harddrake2:117 #, c-format msgid "Name" msgstr "Nome" #: standalone/drakups:269 #, c-format msgid "UPS users" msgstr "Usuarios SAI" #: standalone/drakups:285 #, c-format msgid "Access Control Lists" msgstr "Listas de Control de Acceso" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "Máscara IP" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "Regras" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "Acción" #: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81 #, c-format msgid "Level" msgstr "Nivel" #: standalone/drakups:299 #, c-format msgid "ACL name" msgstr "Nome da ACL" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "Benvid@ ás ferramentas de configuración de SAI" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "A conexión VPN está activada." #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Xa se configurou unha conexión VPN.\n" "\n" "Agora mesmo está activada.\n" "\n" "Que desexa facer?" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "Desactivando VPN..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "A conexión VPN está desactivada." #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "A conexión VPN está desactivada" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Xa se configurou unha conexión VPN.\n" "\n" "Agora mesmo está desactivada.\n" "\n" "Que desexa facer?" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "Activando VPN..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "A conexión VPN está activada." #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "Configuración sinxela de VPN." #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" "Conexión VPN.\n" "\n" "Este programa está baseado nos seguintes proxectos:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - os documentos e as páxinas man veñen co paquete %s\n" "\n" "Lea COMO MÍNIMO os documentos de ipsec-howto\n" "antes de continuar." #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "Módulo do kernel." #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" "O kernel ten que ter soporte ipsec.\n" "\n" "Está executando a versión %s do kernel.\n" "\n" "Este kernel ten soporte '%s'." #: standalone/drakvpn:292 #, c-format msgid "Security Policies" msgstr "Políticas de Seguridade" #: standalone/drakvpn:292 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:295 standalone/drakvpn:306 #, c-format msgid "Configuration file" msgstr "Ficheiro de configuración" #: standalone/drakvpn:296 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:307 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" "Agora, imos configura-lo ficheiro %s.\n" "\n" "\n" "Prema en Seguinte.\n" #: standalone/drakvpn:325 standalone/drakvpn:685 #, c-format msgid "%s entries" msgstr "%s entradas" #: standalone/drakvpn:326 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" "O contido do ficheiro %s\n" "está dividido en seccións.\n" "\n" "Agora pode:\n" "\n" " - ver, engadir, editar, ou eliminar seccións, e despois\n" " - gardar os cambios\n" "\n" "¿Qué desexa facer?\n" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "Ver" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Commit" msgstr "Gardar" #: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 #: standalone/drakvpn:713 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "Ve-la configuración" #: standalone/drakvpn:352 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" "O ficheiro %s non existe.\n" "\n" "Isto debe ser unha nova configuración.\n" "\n" "Ten que voltar e escoller 'engadir'.\n" #: standalone/drakvpn:368 #, c-format msgid "ipsec.conf entries" msgstr "entradas de ipsec.conf" #: standalone/drakvpn:369 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "config setup" msgstr "reconfigurar" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "conn %default" msgstr "defecto" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "normal conn" msgstr "Mostrar información" #: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510 #, c-format msgid "Exists!" msgstr "Existe!" #: standalone/drakvpn:383 standalone/drakvpn:424 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" "Xa existe unha sección con este nome.\n" "Os nomes das seccións deben se únicos.\n" "\n" "Ten que voltar e engadir outra sección\n" "ou cambiarlle o nome.\n" #: standalone/drakvpn:400 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:405 #, c-format msgid "interfaces" msgstr "interfaces" #: standalone/drakvpn:406 #, c-format msgid "klipsdebug" msgstr "klipsdebug" #: standalone/drakvpn:407 #, c-format msgid "plutodebug" msgstr "plutodebug" #: standalone/drakvpn:408 #, c-format msgid "plutoload" msgstr "plutoload" #: standalone/drakvpn:409 #, c-format msgid "plutostart" msgstr "plutostart" #: standalone/drakvpn:410 #, c-format msgid "uniqueids" msgstr "uniqueids" #: standalone/drakvpn:444 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:451 #, c-format msgid "PFS" msgstr "PFS" #: standalone/drakvpn:452 #, c-format msgid "keyingtries" msgstr "keyingtries" #: standalone/drakvpn:453 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:454 #, c-format msgid "disablearrivalcheck" msgstr "disablearrivalcheck" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "left" msgstr "left" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftcert" msgstr "leftcert" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftrsasigkey" msgstr "leftrsasigkey" #: standalone/drakvpn:458 standalone/drakvpn:497 #, c-format msgid "leftsubnet" msgstr "leftsubnet" #: standalone/drakvpn:459 standalone/drakvpn:498 #, c-format msgid "leftnexthop" msgstr "leftnexthop" #: standalone/drakvpn:488 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" "O ficheiro %s ten varias seccións, ou conexións.\n" "\n" "Agora pode engadir unha nova sección.\n" "Escolla continuar cando estea listo para escribir os datos.\n" #: standalone/drakvpn:491 #, c-format msgid "section name" msgstr "nome da sección" #: standalone/drakvpn:492 #, c-format msgid "authby" msgstr "authby" #: standalone/drakvpn:493 #, c-format msgid "auto" msgstr "auto" #: standalone/drakvpn:499 #, c-format msgid "right" msgstr "right" #: standalone/drakvpn:500 #, c-format msgid "rightcert" msgstr "rightcert" #: standalone/drakvpn:501 #, c-format msgid "rightrsasigkey" msgstr "rightrsasigkey" #: standalone/drakvpn:502 #, c-format msgid "rightsubnet" msgstr "rightsubnet" #: standalone/drakvpn:503 #, c-format msgid "rightnexthop" msgstr "rightnexthop" #: standalone/drakvpn:511 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" "Xa existe unha sección con este nome.\n" "Os nomes das seccións deben ser únicos.\n" "\n" "Ten que voltar e engadir outra sección\n" "ou cambia-lo nome da sección.\n" #: standalone/drakvpn:543 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Engadir unha Política de Seguridade.\n" "\n" "Agora pode engadir unha Política de Seguridade.\n" "\n" "Escolla continuar cando estea preparado para escribir os datos.\n" #: standalone/drakvpn:576 standalone/drakvpn:826 #, c-format msgid "Edit section" msgstr "Edita-la sección" #: standalone/drakvpn:577 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" "O ficheiro %s ten varias seccións ou conexións.\n" "\n" "Pode escoller debaixo a que quere editar\n" "e despois premer en seguinte.\n" #: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 #: standalone/drakvpn:877 #, c-format msgid "Section names" msgstr "Nomes das seccións" #: standalone/drakvpn:590 #, c-format msgid "Can not edit!" msgstr "¡ Non se pode editar !" #: standalone/drakvpn:591 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:600 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:611 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:624 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:645 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "Editar unha Política de Seguridade.\n" "\n" "Agora pode editar unha Política de Seguridade.\n" "\n" "Escolla continuar cando estea preparad@ para escribir os datos.\n" #: standalone/drakvpn:656 standalone/drakvpn:873 #, c-format msgid "Remove section" msgstr "Eliminar sección" #: standalone/drakvpn:657 standalone/drakvpn:874 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" "O ficheiro %s ten varias seccións ou conexións.\n" "\n" "Pode escoller debaixo a que desexa eliminar\n" "e despois premer en seguinte.\n" #: standalone/drakvpn:686 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" "Configuración do ficheiro racoon.conf.\n" "\n" "O contido deste ficheiro está dividido en seccións.\n" "Agora pode:\n" " - ver \t\t (ve-lo contido do ficheiro)\n" " - engadir\t\t\t (engadir unha sección)\n" " - editar \t\t\t (modifica-los parámetros dunha sección)\n" " - eliminar \t\t (eliminar unha sección)\n" " - gardar \t\t (escribe os cambios no ficheiro real)" #: standalone/drakvpn:714 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" "O ficheiro %s non existe\n" "\n" "Isto debe ser unha nova configuración.\n" "\n" "Debe voltar e seleccionar configurar.\n" #: standalone/drakvpn:728 #, c-format msgid "racoonf.conf entries" msgstr "entradas de racoonf.conf" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:735 #, c-format msgid "path" msgstr "ruta" #: standalone/drakvpn:735 #, c-format msgid "remote" msgstr "remoto" #: standalone/drakvpn:735 #, c-format msgid "sainfo" msgstr "sainfo" #: standalone/drakvpn:743 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:746 #, c-format msgid "path type" msgstr "tipo de ruta" #: standalone/drakvpn:750 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:770 standalone/drakvpn:863 #, c-format msgid "real file" msgstr "ficheiro real" #: standalone/drakvpn:793 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:810 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:827 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" "O ficheiro %s ten varias seccións ou conexións.\n" "\n" "Pode escoller na lista de embaixo a que desexa\n" "editar e despois premer en seguinte.\n" #: standalone/drakvpn:838 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "O ficheiro %s ten varias seccións.\n" "\n" "\n" "Agora pode editar as entradas da sección remote.\n" "\n" "Escolla continuar cando estea listo para escribir os datos.\n" #: standalone/drakvpn:847 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" "O ficheiro %s ten varias seccións.\n" "\n" "Agora pode editar as entradas da sección sainfo.\n" "\n" "Escolla continuar cando estea preparado para escribir os datos." #: standalone/drakvpn:855 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:862 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:903 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:923 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:924 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:941 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Protocolo de arrinque" #: standalone/drakvpn:942 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:956 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:957 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:974 #, c-format msgid "Sainfo destination protocol" msgstr "" #: standalone/drakvpn:975 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "PFS group" msgstr "Grupo PFS" #: standalone/drakvpn:991 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:996 #, fuzzy, c-format msgid "Lifetime number" msgstr "Número de teléfono" #: standalone/drakvpn:997 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1015 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1033 #, c-format msgid "Authentication algorithm" msgstr "Algoritmo de autenticación" #: standalone/drakvpn:1035 #, c-format msgid "Compression algorithm" msgstr "Algoritmo de compresión" #: standalone/drakvpn:1036 #, fuzzy, c-format msgid "deflate" msgstr "defecto" #: standalone/drakvpn:1043 #, c-format msgid "Remote" msgstr "Remoto" #: standalone/drakvpn:1044 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1052 #, fuzzy, c-format msgid "Exchange mode" msgstr "Modo de marcación" #: standalone/drakvpn:1054 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1060 #, c-format msgid "Generate policy" msgstr "Xerar política" #: standalone/drakvpn:1062 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1076 #, c-format msgid "Passive" msgstr "Pasivo" #: standalone/drakvpn:1078 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1081 #, c-format msgid "Certificate type" msgstr "Tipo de certificado" #: standalone/drakvpn:1083 #, fuzzy, c-format msgid "My certfile" msgstr "Seleccione un ficheiro" #: standalone/drakvpn:1084 #, c-format msgid "Name of the certificate" msgstr "Nome do certificado" #: standalone/drakvpn:1085 #, c-format msgid "My private key" msgstr "A miña clave privada" #: standalone/drakvpn:1086 #, c-format msgid "Name of the private key" msgstr "Nome da clave privada" #: standalone/drakvpn:1087 #, fuzzy, c-format msgid "Peers certfile" msgstr "Seleccione un ficheiro" #: standalone/drakvpn:1088 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1089 #, fuzzy, c-format msgid "Verify cert" msgstr "moi bo" #: standalone/drakvpn:1091 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1093 #, c-format msgid "My identifier" msgstr "O meu identificador" #: standalone/drakvpn:1094 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1114 #, fuzzy, c-format msgid "Peers identifier" msgstr "Impresora" #: standalone/drakvpn:1115 #, fuzzy, c-format msgid "Proposal" msgstr "Protocolo" #: standalone/drakvpn:1117 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Hash algorithm" msgstr "Algoritmo de hash" #: standalone/drakvpn:1126 #, c-format msgid "DH group" msgstr "Grupo DH" #: standalone/drakvpn:1133 #, c-format msgid "Command" msgstr "Comando" #: standalone/drakvpn:1134 #, c-format msgid "Source IP range" msgstr "Rango de IPs de orixe" #: standalone/drakvpn:1135 #, c-format msgid "Destination IP range" msgstr "Rango de IPs de destino" #: standalone/drakvpn:1136 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Protocolo de arrinque" #: standalone/drakvpn:1136 standalone/drakvpn:1143 #, c-format msgid "any" msgstr "calquer" #: standalone/drakvpn:1138 #, c-format msgid "Flag" msgstr "Bandeira" #: standalone/drakvpn:1139 #, c-format msgid "Direction" msgstr "Dirección" #: standalone/drakvpn:1140 #, c-format msgid "IPsec policy" msgstr "Política IPsec" #: standalone/drakvpn:1140 #, c-format msgid "ipsec" msgstr "ipsec" #: standalone/drakvpn:1140 #, c-format msgid "discard" msgstr "descartar" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "tunnel" msgstr "Cancelar" #: standalone/drakvpn:1143 #, c-format msgid "transport" msgstr "transportar" #: standalone/drakvpn:1145 #, c-format msgid "Source/destination" msgstr "Fonte/destino" #: standalone/drakvpn:1146 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1146 #, c-format msgid "default" msgstr "por defecto" #: standalone/drakvpn:1146 #, c-format msgid "use" msgstr "usar" #: standalone/drakvpn:1146 #, c-format msgid "unique" msgstr "único" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "USA (broadcast)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "USA (cable)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Canadá (cable)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "Xapón (broadcast)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "Xapón (cable)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "China (broadcast)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "Europa Occidental" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Europa do Leste" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "Francia [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "Nova Celandia" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "TV normal:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "Área:" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "" #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "" #: standalone/drakxtv:107 #, fuzzy, c-format msgid "There was an error while scanning for TV channels" msgstr "Houbo un erro ó instalar os paquetes:" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "¡Que teña un bo día!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "¡Agora, pode executar xawtv (¡baixo X Window!) !\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "¡Non se detectou ningunha Tarxeta de TV!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Non se detectou ningunha Tarxeta de TV na súa máquina. Verifique que hai " "unha Tarxeta de Video/TV soportada por Linux conectada correctamente.\n" "\n" "\n" "Pode visita-la nosa base de datos de hardware en:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/harddrake2:24 #, c-format msgid "Alternative drivers" msgstr "Controladores alternativos" #: standalone/harddrake2:25 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "a lista de controladores altenativos para esta tarxeta de son" #: standalone/harddrake2:28 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "isto é o bus físico onde está conectado o dispositivo (p.ex.: PCI, USB, ...)" #: standalone/harddrake2:30 standalone/harddrake2:145 #, c-format msgid "Bus identification" msgstr "Identificación do bus" #: standalone/harddrake2:31 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: standalone/harddrake2:34 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: standalone/harddrake2:37 #, c-format msgid "Drive capacity" msgstr "Capacidade da unidade" #: standalone/harddrake2:37 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" "capacidades especiais do driver (capacidade de gravación e ou soporte de DVD)" #: standalone/harddrake2:38 #, c-format msgid "this field describes the device" msgstr "este campo describe o dispositivo" #: standalone/harddrake2:39 #, c-format msgid "Old device file" msgstr "Ficheiro de dispositivo antigo" #: standalone/harddrake2:40 #, c-format msgid "old static device name used in dev package" msgstr "" #: standalone/harddrake2:41 #, c-format msgid "New devfs device" msgstr "Novo dispositivo devfs" #: standalone/harddrake2:42 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:45 #, c-format msgid "Module" msgstr "Módulo" #: standalone/harddrake2:45 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "o módulo do kernel GNU/Linux que xestiona o dispositivo" #: standalone/harddrake2:46 #, c-format msgid "Extended partitions" msgstr "Particións extendidas" #: standalone/harddrake2:46 #, c-format msgid "the number of extended partitions" msgstr "o número de particións extendidas" #: standalone/harddrake2:47 #, c-format msgid "Geometry" msgstr "Xeometría" #: standalone/harddrake2:47 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "Xeometría Cilindros/Cabezas/Sectores do disco" #: standalone/harddrake2:48 #, c-format msgid "Disk controller" msgstr "Controlador de disco" #: standalone/harddrake2:48 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:49 #, c-format msgid "class of hardware device" msgstr "clase de dispositivo hardware" #: standalone/harddrake2:50 standalone/harddrake2:82 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "Modelo" #: standalone/harddrake2:50 #, c-format msgid "hard disk model" msgstr "Modelo do disco duro" #: standalone/harddrake2:51 #, c-format msgid "network printer port" msgstr "porto da impresora de rede" #: standalone/harddrake2:52 #, c-format msgid "Primary partitions" msgstr "Particións primarias" #: standalone/harddrake2:52 #, c-format msgid "the number of the primary partitions" msgstr "o número de particións primarias" #: standalone/harddrake2:53 #, c-format msgid "the vendor name of the device" msgstr "o nome do vendedor do dispositivo" #: standalone/harddrake2:54 #, c-format msgid "Bus PCI #" msgstr "Bus PCI #" #: standalone/harddrake2:54 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "o bus PCI onde está conectado o dispositivo" #: standalone/harddrake2:55 #, c-format msgid "PCI device #" msgstr "Dispositivo PCI #" #: standalone/harddrake2:55 #, c-format msgid "PCI device number" msgstr "Dispositivo PCI número" #: standalone/harddrake2:56 #, c-format msgid "PCI function #" msgstr "Función PCI #" #: standalone/harddrake2:56 #, c-format msgid "PCI function number" msgstr "Función PCI número" #: standalone/harddrake2:57 #, c-format msgid "Vendor ID" msgstr "ID do vendedor" #: standalone/harddrake2:57 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "isto é o identificador numérico estándar do vendedor" #: standalone/harddrake2:58 #, c-format msgid "Device ID" msgstr "ID do dispositivo " #: standalone/harddrake2:58 #, c-format msgid "this is the numerical identifier of the device" msgstr "isto é identificador numérico do dispositivo" #: standalone/harddrake2:59 #, c-format msgid "Sub vendor ID" msgstr "ID de subvendedor" #: standalone/harddrake2:59 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "Sub device ID" msgstr "Dispositivos UPS" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "este é o identificador numérico menor do dispositivo" #: standalone/harddrake2:61 #, c-format msgid "Device USB ID" msgstr "ID do dispositivo USB " #: standalone/harddrake2:61 #, c-format msgid ".." msgstr ".." #: standalone/harddrake2:65 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:65 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:66 #, c-format msgid "Cache size" msgstr "Tamaño da caché" #: standalone/harddrake2:66 #, c-format msgid "size of the (second level) cpu cache" msgstr "tamaño da caché segundo nivel da cpu (L2)" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:69 #, c-format msgid "Coma bug" msgstr "Erro da coma" #: standalone/harddrake2:69 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "Cpuid family" msgstr "" #: standalone/harddrake2:70 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "familia da cpu (p.ex.: 6 para a clase i686)" #: standalone/harddrake2:71 #, fuzzy, c-format msgid "Cpuid level" msgstr "Establecendo o nivel de seguridade" #: standalone/harddrake2:71 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: standalone/harddrake2:72 #, c-format msgid "Frequency (MHz)" msgstr "Frecuencia (MHz)" #: standalone/harddrake2:72 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "a frecuencia da CPU en MHz (Megahertzio é máis ou menos o número de " "instruccións que pode executa-la cpu por segundo)" #: standalone/harddrake2:73 #, c-format msgid "Flags" msgstr "Opcións" #: standalone/harddrake2:73 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:74 #, c-format msgid "Fdiv bug" msgstr "Erro fdiv" #: standalone/harddrake2:75 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "Is FPU present" msgstr "" #: standalone/harddrake2:76 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "si significa que o procesador ten un coprocesador aritmético" #: standalone/harddrake2:77 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:77 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:78 #, c-format msgid "F00f bug" msgstr "Erro f00f" #: standalone/harddrake2:78 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:79 #, c-format msgid "Halt bug" msgstr "Erro de apagado" #: standalone/harddrake2:80 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:81 #, c-format msgid "sub generation of the cpu" msgstr "subxeración da cpu" #: standalone/harddrake2:82 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "xeración da cpu (p.ex: 8 para Pentium III, ...)" #: standalone/harddrake2:83 #, c-format msgid "Model name" msgstr "Nome do modelo" #: standalone/harddrake2:83 #, c-format msgid "official vendor name of the cpu" msgstr "nome do vendedor oficial da cpu" #: standalone/harddrake2:84 #, c-format msgid "the name of the CPU" msgstr "o nome da CPU" #: standalone/harddrake2:85 #, c-format msgid "Processor ID" msgstr "ID do procesador" #: standalone/harddrake2:85 #, c-format msgid "the number of the processor" msgstr "o número do procesador" #: standalone/harddrake2:86 #, fuzzy, c-format msgid "Model stepping" msgstr "Formatando" #: standalone/harddrake2:86 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:87 #, c-format msgid "the vendor name of the processor" msgstr "o nome do vendedor do procesador" #: standalone/harddrake2:88 #, c-format msgid "Write protection" msgstr "Protección contra a escritura" #: standalone/harddrake2:88 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:92 #, c-format msgid "Floppy format" msgstr "Formatao dos disquetes" #: standalone/harddrake2:92 #, c-format msgid "format of floppies supported by the drive" msgstr "formatos dos disquetes soportados pola unidade" #: standalone/harddrake2:96 #, c-format msgid "EIDE/SCSI channel" msgstr "Canle EIDE/SCSI" #: standalone/harddrake2:97 #, c-format msgid "Disk identifier" msgstr "Identificador de disco" #: standalone/harddrake2:97 #, c-format msgid "usually the disk serial number" msgstr "normalmente o número de serie do disco" #: standalone/harddrake2:98 #, fuzzy, c-format msgid "Logical unit number" msgstr "Nome do volume lóxico " #: standalone/harddrake2:98 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:105 #, c-format msgid "Installed size" msgstr "Tamaño instalado" #: standalone/harddrake2:105 #, c-format msgid "Installed size of the memory bank" msgstr "Tamaño instalado do banco de memoria" #: standalone/harddrake2:106 #, c-format msgid "Enabled Size" msgstr "Tamaño Dispoñible" #: standalone/harddrake2:106 #, c-format msgid "Enabled size of the memory bank" msgstr "Tamaño dispoñible no banco de memoria" #: standalone/harddrake2:107 #, c-format msgid "type of the memory device" msgstr "tipo do dispositivo de memoria" #: standalone/harddrake2:108 #, c-format msgid "Speed" msgstr "Velocidade" #: standalone/harddrake2:108 #, c-format msgid "Speed of the memory bank" msgstr "Velocidade do banco de memoria" #: standalone/harddrake2:109 #, fuzzy, c-format msgid "Bank connections" msgstr "Xestiona-las conexións" #: standalone/harddrake2:110 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:114 #, c-format msgid "Device file" msgstr "Ficheiro de dispositivo" #: standalone/harddrake2:114 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" "o ficheiro de dispositivo que se usa para comunicar co driver do kernel para " "o rato" #: standalone/harddrake2:115 #, c-format msgid "Emulated wheel" msgstr "Roda emulada" #: standalone/harddrake2:115 #, c-format msgid "whether the wheel is emulated or not" msgstr "con emulación da roda" #: standalone/harddrake2:116 #, c-format msgid "the type of the mouse" msgstr "o tipo de rato" #: standalone/harddrake2:117 #, c-format msgid "the name of the mouse" msgstr "o nome do rato" #: standalone/harddrake2:118 #, c-format msgid "Number of buttons" msgstr "Número de botóns" #: standalone/harddrake2:118 #, c-format msgid "the number of buttons the mouse has" msgstr "o número de botóns que ten o rato" #: standalone/harddrake2:119 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "o tipo de bus ó que está conectado o rato" #: standalone/harddrake2:120 #, c-format msgid "Mouse protocol used by X11" msgstr "Protocolo de rato que usa X11" #: standalone/harddrake2:120 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "o protocolo que o escritorio gráfico usa co rato" #: standalone/harddrake2:127 standalone/harddrake2:136 #: standalone/harddrake2:143 standalone/harddrake2:151 #: standalone/harddrake2:321 #, c-format msgid "Identification" msgstr "Identificación" #: standalone/harddrake2:128 standalone/harddrake2:144 #, c-format msgid "Connection" msgstr "Conexión" #: standalone/harddrake2:137 #, fuzzy, c-format msgid "Performances" msgstr "Preferencias" #: standalone/harddrake2:138 #, c-format msgid "Bugs" msgstr "Erros" #: standalone/harddrake2:139 #, c-format msgid "FPU" msgstr "FPU" #: standalone/harddrake2:147 #, c-format msgid "Partitions" msgstr "Particións" #: standalone/harddrake2:152 #, c-format msgid "Features" msgstr "Funcionalidades" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:175 standalone/logdrake:77 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/_Opcións" #: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/A_xuda" #: standalone/harddrake2:180 #, c-format msgid "/Autodetect _printers" msgstr "/Detectar automáticamente as im_presoras" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _modems" msgstr "/Detectar automáticamente os _módems" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Detectar automáticamente as unidades _jazz" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" #: standalone/harddrake2:190 #, c-format msgid "/_Upload the hardware list" msgstr "/_Actualizar a lista de hardware" #: standalone/harddrake2:191 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/_Saír" #: standalone/harddrake2:204 #, c-format msgid "/_Fields description" msgstr "/Descrición _dos campos" #: standalone/harddrake2:206 #, c-format msgid "Harddrake help" msgstr "Axuda do Harddrake" #: standalone/harddrake2:215 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Cando seleccione un dispositivo, poderá ve-la información do dispositivo nos " "campos do marco (\"Información\") da dereita" #: standalone/harddrake2:221 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_Comunicar Erro" #: standalone/harddrake2:223 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_Acerca de..." #: standalone/harddrake2:224 #, c-format msgid "About Harddrake" msgstr "Acerca de Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:226 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Isto é o HardDrake, unha ferramenta de configuración de hardware de %s.\n" "Versión: %s\n" "Autor: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: standalone/harddrake2:243 #, c-format msgid "Harddrake2" msgstr "Harddrake2" #: standalone/harddrake2:258 #, c-format msgid "Detected hardware" msgstr "Hardware detectado" #: standalone/harddrake2:263 #, c-format msgid "Configure module" msgstr "Configura-lo módulo" #: standalone/harddrake2:270 #, c-format msgid "Run config tool" msgstr "Executa-la ferramenta de configuración" #: standalone/harddrake2:308 standalone/net_monitor:108 #: standalone/net_monitor:109 standalone/net_monitor:114 #, c-format msgid "unknown" msgstr "descoñecido" #: standalone/harddrake2:309 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "Descoñecido" #: standalone/harddrake2:329 #, c-format msgid "Misc" msgstr "Miscelánea" #: standalone/harddrake2:344 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Clique nun dispositivo na árbore da esquerda para amosa-la súa información " "aquí." #: standalone/harddrake2:396 #, c-format msgid "secondary" msgstr "secundario" #: standalone/harddrake2:396 #, c-format msgid "primary" msgstr "primario" #: standalone/harddrake2:400 #, c-format msgid "burner" msgstr "gravadora" #: standalone/harddrake2:400 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:546 standalone/harddrake2:549 #, c-format msgid "Upload the hardware list" msgstr "Actualizar a lista de hardware" #: standalone/harddrake2:551 #, c-format msgid "Account:" msgstr "Conta:" #: standalone/harddrake2:552 #, c-format msgid "Password:" msgstr "Contrasinal:" #: standalone/harddrake2:553 #, c-format msgid "Hostname:" msgstr "Nome de máquina:" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "Escolla a disposición do seu teclado." #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "¿Quere que a tecla de Retroceso devolva Suprimir na consola?" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:67 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "Xa se fixo o cambio, pero para que sexa efectivo debe saír do sistema" #: standalone/logdrake:50 #, c-format msgid "Mandrakelinux Tools Logs" msgstr "Ferramentas de Logs de Mandrakelinux" #: standalone/logdrake:51 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:64 #, c-format msgid "Show only for the selected day" msgstr "Amosar só do día seleccionado" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/Ficheiro/_Novo" #: standalone/logdrake:71 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/Ficheiro/_Abrir" #: standalone/logdrake:72 #, c-format msgid "O" msgstr "A" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "/Ficheiro/_Gardar" #: standalone/logdrake:73 #, c-format msgid "S" msgstr "G" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/Ficheiro/Gardar _Coma" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/Ficheiro/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/Opcións/Proba" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/Axuda/_Acerca de..." #: standalone/logdrake:109 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "Autenticación" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "Usuario" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "Mensaxes" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "Syslog" #: standalone/logdrake:116 #, c-format msgid "search" msgstr "buscar" #: standalone/logdrake:128 #, c-format msgid "A tool to monitor your logs" msgstr "Unha ferramenta para monitoriza-los seus logs" #: standalone/logdrake:129 standalone/net_monitor:99 #, c-format msgid "Settings" msgstr "Opcións" #: standalone/logdrake:134 #, fuzzy, c-format msgid "Matching" msgstr "Máquina:" #: standalone/logdrake:135 #, fuzzy, c-format msgid "but not matching" msgstr "Máquina:" #: standalone/logdrake:139 #, c-format msgid "Choose file" msgstr "Seleccionar ficheiro" #: standalone/logdrake:148 #, c-format msgid "Calendar" msgstr "Calendario" #: standalone/logdrake:158 #, c-format msgid "Content of the file" msgstr "Contido do ficheiro" #: standalone/logdrake:162 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "Alerta de correo" #: standalone/logdrake:169 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "O asistente de alertas fallou inesperadamente:" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "agarde, analisando o ficheiro: %s" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "Servidor World Wide Web Apache" #: standalone/logdrake:377 #, fuzzy, c-format msgid "Domain Name Resolver" msgstr "Nome de dominio" #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "Servidor FTP" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Servidor de Correo Postfix" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Servidor Samba" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Servicio Webmin" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Servicio Xinetd" #: standalone/logdrake:394 #, c-format msgid "Configure the mail alert system" msgstr "Configura-lo sistema de alertas de correo" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "Para-lo sistema de alertas de correo" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "Configuración de alertas de correo" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Benvid@ á utilidade de configuración de correo.\n" "\n" "Aquí, poderá configura-lo sistema de alertas.\n" #: standalone/logdrake:406 #, c-format msgid "What do you want to do?" msgstr "¿Qué desexa facer?" #: standalone/logdrake:413 #, c-format msgid "Services settings" msgstr "Configuración dos servicios" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: standalone/logdrake:421 #, fuzzy, c-format msgid "Load setting" msgstr "Formatando" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Recibirá unha alerta se a carga é maior ca este valor" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Carga" #: standalone/logdrake:428 #, c-format msgid "Alert configuration" msgstr "Configuración de alertas" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "Introduza o seu enderezo de correo-e embaixo " #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "e introduza o nome (ou o IP) do servidor SMTP que desexa usar" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "O asistente configurou con éxito a alerta de correo." #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "O asistente desactivou con é a alerta de correo." #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "Gardar coma..." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Escolla o seu tipo de rato." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "¿Emula-lo terceiro botón?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Proba-lo rato" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Probe o seu rato:" #: standalone/net_applet:45 #, c-format msgid "Network is up on interface %s" msgstr "A rede está activada na interface %s" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:53 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "" "A rede está desactivada na interface %s. Clique en \"Configura-la Rede\"" #: standalone/net_applet:68 standalone/net_monitor:474 #, c-format msgid "Connect %s" msgstr "Conectar %s" #: standalone/net_applet:69 standalone/net_monitor:474 #, c-format msgid "Disconnect %s" msgstr "Desconectar %s" #: standalone/net_applet:70 #, c-format msgid "Monitor Network" msgstr "Monitorizar a Rede" #: standalone/net_applet:71 #, c-format msgid "Configure Network" msgstr "Configura-la Rede" #: standalone/net_applet:73 #, fuzzy, c-format msgid "Watched interface" msgstr "interfaces" #: standalone/net_applet:82 #, c-format msgid "Profiles" msgstr "Perfís" #: standalone/net_applet:91 #, c-format msgid "Get Online Help" msgstr "Conseguir Axuda en Liña" #: standalone/net_applet:223 #, fuzzy, c-format msgid "Interactive intrusion detection" msgstr "Detección automática da impresora" #: standalone/net_applet:227 #, c-format msgid "Always launch on startup" msgstr "Lanzar sempre ó inicia-lo sistema" #: standalone/net_applet:280 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: standalone/net_applet:281 #, c-format msgid "The %s service has been attacked by %s." msgstr "O servicio %s foi atacado por %s." #: standalone/net_applet:282 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: standalone/net_applet:290 #, fuzzy, c-format msgid "Active Firewall: intrusion detected" msgstr "¡Detectouse unha configuración de cortalumes!" #: standalone/net_applet:301 #, fuzzy, c-format msgid "Do you want to blacklist the attacker?" msgstr "¿Queres rematar o xogo?" #: standalone/net_applet:315 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_applet:318 #, c-format msgid "Attack details" msgstr "Detalles do ataque" #: standalone/net_applet:322 #, c-format msgid "Attack time: %s" msgstr "Hora do ataque: %s" #: standalone/net_applet:323 #, c-format msgid "Network interface: %s" msgstr "Interface de rede: %s" #: standalone/net_applet:324 #, c-format msgid "Attack type: %s" msgstr "Tipo de ataque: %s" #: standalone/net_applet:325 #, c-format msgid "Protocol: %s" msgstr "Protocolo: %s" #: standalone/net_applet:326 #, c-format msgid "Attacker IP address: %s" msgstr "Enderezo IP do atacante: %s" #: standalone/net_applet:327 #, c-format msgid "Attacker hostname: %s" msgstr "Nome de máquina do atacante: %s" #: standalone/net_applet:328 #, c-format msgid "Service attacked: %s" msgstr "Servicio atacado: %s" #: standalone/net_applet:329 #, c-format msgid "Port attacked: %s" msgstr "Porto atacado: %s" #: standalone/net_applet:330 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_monitor:61 standalone/net_monitor:66 #, c-format msgid "Network Monitoring" msgstr "Monitorización da Rede" #: standalone/net_monitor:104 #, c-format msgid "Global statistics" msgstr "Estatísticas globais" #: standalone/net_monitor:107 #, fuzzy, c-format msgid "Instantaneous" msgstr "Instantáneas" #: standalone/net_monitor:107 #, c-format msgid "Average" msgstr "Normal" #: standalone/net_monitor:108 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "Enviando\n" "velocidade:" #: standalone/net_monitor:109 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "Recibindo\n" "velocidade:" #: standalone/net_monitor:113 #, c-format msgid "" "Connection\n" "time: " msgstr "" "Conexión\n" "tempo: " #: standalone/net_monitor:120 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:139 #, c-format msgid "Wait please, testing your connection..." msgstr "Agarde, probando a conexión..." #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Disconnecting from Internet " msgstr "Desconectando da Internet " #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Connecting to Internet " msgstr "Conectando á Internet " #: standalone/net_monitor:232 #, c-format msgid "Disconnection from Internet failed." msgstr "Fallo ó desconectarse da Internet." #: standalone/net_monitor:233 #, c-format msgid "Disconnection from Internet complete." msgstr "Desconexión da Internet completada." #: standalone/net_monitor:235 #, c-format msgid "Connection complete." msgstr "Conexión establecida." #: standalone/net_monitor:236 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrakelinux Control Center." msgstr "" "Fallo ó conectarse.\n" "Verifique a configuración no Centro de Control de Mandrakelinux." #: standalone/net_monitor:341 #, c-format msgid "Color configuration" msgstr "Configuración da cor" #: standalone/net_monitor:389 standalone/net_monitor:409 #, c-format msgid "sent: " msgstr "enviados: " #: standalone/net_monitor:396 standalone/net_monitor:413 #, c-format msgid "received: " msgstr "recibidos: " #: standalone/net_monitor:403 #, c-format msgid "average" msgstr "" #: standalone/net_monitor:406 #, c-format msgid "Local measure" msgstr "Medida local" #: standalone/net_monitor:467 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Advertencia, detectouse outra conexión á Internet, que pode estar usando a " "súa rede" #: standalone/net_monitor:478 #, c-format msgid "No internet connection configured" msgstr "Non hai conexións á Internet configuradas" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "Lendo os datos das impresoras instaladas..." #: standalone/printerdrake:116 #, c-format msgid "%s Printer Management Tool" msgstr "Ferramenta de Xestión de Impresoras %s" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/_Accións" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/En_gadir unha Impresora" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/Establecer coma _Por defecto" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/_Editar" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/E_liminar" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/Modo e_xperto" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/_Actualizar" #: standalone/printerdrake:146 #, c-format msgid "/_Configure CUPS" msgstr "/_Configurar CUPS" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "Buscar:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "Aplica-lo filtro" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "Nome da Impresora" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "Tipo de Conexión" #: standalone/printerdrake:218 #, c-format msgid "Server Name" msgstr "Nome do Servidor" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, c-format msgid "Add Printer" msgstr "Engadir unha Impresora" #: standalone/printerdrake:226 #, c-format msgid "Add a new printer to the system" msgstr "Engadir unha nova impresora ó sistema" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "Establecer coma por defecto" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "Establece-la impresora seleccionada coma a impresora por defecto" #: standalone/printerdrake:232 #, c-format msgid "Edit selected printer" msgstr "Edita-la impresora seleccionada" #: standalone/printerdrake:235 #, c-format msgid "Delete selected printer" msgstr "Elimina-la impresora seleccionada" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "Actualiza-la lista" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS" msgstr "Configurar CUPS" #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS printing system" msgstr "Configura-lo sistema de impresión CUPS" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "Activada" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "Desactivada" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "Autores: " #. -PO: here %s is the version number #: standalone/printerdrake:570 #, c-format msgid "Printer Management %s" msgstr "Xestión de Impresoras %s" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "Cómpre instala-los paquetes SANE para poder usar escáners.\n" "\n" "Desexa instala-los paquetes SANE?" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "Abortando Scannerdrake." #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Non se puideron instalar os paquetes necesarios para configurar un escáner " "con Scannerdrake." #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "Non se vai iniciar Scannerdrake agora." #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "Buscando escáners configurados..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "Buscando novos escáners..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "Volvendo a xerar a lista de escáners configurados..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "O %s non está soportado por esta versión de %s." #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "atopouse %s en %s, ¿desexa configuralo automáticamente?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s non está na base de datos de escáners, ¿desexa configuralo a man?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Seleccione un modelo de escáner" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Modelo detectado: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Porto: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "(NON SOPORTADO)" #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "O %s non está soportado en Linux." #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "Non instala-lo ficheiro de firmware" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "Se este é o caso, pode facer que isto se faga automáticamente." #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "Pode atopar o ficheiro no CD ou no disquete que viña co escáner, na páxina " "do fabricante, ou na partición de Windows." #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "Instala-lo ficheiro de firmware dende" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "Seleccione o ficheiro de firmware" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "¡O ficheiro de firmware %s non existe ou non se pode ler!" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "Instalar firmware para" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "Seleccione o ficheiro de firmware para %s" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "Non se puido instalar o ficheiro de firmware para o %s!" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "O ficheiro de firmware para %s instalouse con éxito." #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "%s non está soportado" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "%s debe configurarse dende printerdrake.\n" "Pode executar printerdrake dende a sección Hardware do Centro de Control de %" "s." #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Detectar automáticamente os portos dispoñibles" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "Seleccione o dispositivo onde está conectado o seu %s" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Nota: Os portos paralelos non se poden detectar automáticamente)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "escoller dispositivo" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "Buscando escáners..." #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "Configurando os módulos do kernel..." #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "Atención!" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" "Máis información na páxina do manual do driver. Execute o comando \"man sane-" "%s\" para lela." #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "Despois disto poderá dixitalizar documentos usando \"XSane\" ou \"Kooka\" " "dende Multimedia/Gráficos no menú de aplicacións." #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" "Configurouse o seu %s, pero é posible que sexan necesarios axustes manuais " "adicionais para que funcione." #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" "Se non aparece na lista de escáners configurados na ventá principal de " "Scannerdrake ou se non funciona correctamente, " #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "editar o ficheiro de configuración /etc/sane.d/%s.conf. " #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "%s xa está configurado.\n" "Agora pode dixitalizar documentos usando \"XSane\" ou \"Kooka\" dende o menú " "Multimedia/Gráficos do menú de aplicacións." #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Os seguintes escáners\n" "\n" "%s\n" "están dispoñibles no seu sistema.\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "O seguinte escáner\n" "\n" "%s\n" "está dispoñible no seu sistema.\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Non se atoparon escáners que estean dispoñibles no teu sistema.\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Buscando novos escáners" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "Engadir un escáner manualmente" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "Instalar/Actualiza-los ficheiros de firmware" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "Compartimento de escáners" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Tódalas máquinas remotas" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Esta máquina" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Aquí pode escoller se os escáners conectados a esta máquina deben ser " "accesibles para as máquina remotas e para cales máquina remotas." #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Tamén pode decidir aquí se os escáners das máquinas remotas deben estar " "dispoñibles neste ordenador." #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Os escáners desta máquina están dispoñibles para outros ordenadores" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "Compartimento de escáners para as máquinas:" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "Usar escáners de ordenadores remotos" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "Usar os escáners nas máquinas:" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "Compartimento de escáners locais" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Engadir máquina" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Editar a máquina seleccionada" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Eliminar a máquina seleccionada" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "Nome/enderezo IP da máquina:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Debe introducir un nome de máquina ou un enderezo IP.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "Esta máquina xa está na lista, e non se pode volver engadir,\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Uso de escáners remotos" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "Cómpre instalar saned para compartir os escáners locais.\n" "\n" "Desexa instalar o paquete saned?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Os seus escáners non estarán dispoñibles na rede." #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Elimináronse algúns dispositivos na clase de hardware \"%s\":\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "- eliminouse %s\n" #: standalone/service_harddrake:108 #, c-format msgid "Some devices were added: %s\n" msgstr "Engadíronse algúns dispositivos: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "- engadiuse %s\n" #: standalone/service_harddrake:204 #, c-format msgid "Hardware probing in progress" msgstr "Probando o hardware" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "Cambios de hardware na clase \"%s\" (%s segundos para responder)" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Desexa executar a ferramenta de configuración axeitada?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Lingua" #: steps.pm:15 #, c-format msgid "License" msgstr "Licencia" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Configura-lo rato" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Detectar discos duros" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Clase de instalación" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Escolla o teclado" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Facendo as particións" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Formata-las particións" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Seleccione os paquetes" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Instala-lo sistema" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "Contrasinal do administrador" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Engadir un usuario" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Configura-la rede" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Cargador de arrinque" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Configura-las X" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Configura-los servicios" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Instalar actualizacións" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Saír da instalación" #: ugtk2.pm:909 #, c-format msgid "Is this correct?" msgstr "¿É isto correcto?" #: ugtk2.pm:969 #, c-format msgid "No file chosen" msgstr "Non se escolleu ningún ficheiro" #: ugtk2.pm:971 #, c-format msgid "You have chosen a file, not a directory" msgstr "Escolleu un ficheiro, e non un directorio" #: ugtk2.pm:973 #, c-format msgid "You have chosen a directory, not a file" msgstr "Escolleu un directorio, non un ficheiro" #: ugtk2.pm:975 #, c-format msgid "No such directory" msgstr "Non existe tal directorio" #: ugtk2.pm:975 #, c-format msgid "No such file" msgstr "Non existe tal ficheiro" #: ugtk2.pm:1056 #, c-format msgid "Expand Tree" msgstr "Expandi-la árbore" #: ugtk2.pm:1057 #, c-format msgid "Collapse Tree" msgstr "Recolle-la árbore" #: ugtk2.pm:1058 #, c-format msgid "Toggle between flat and group sorted" msgstr "Mudar entre lista completa e ordenada por grupos" #: wizards.pm:95 wizards2.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s non está instalado\n" "Prema en \"Seguinte\" para instalalo ou \"Cancelar\" para saír" #: wizards.pm:99 wizards2.pm:99 #, c-format msgid "Installation failed" msgstr "Fallo ó instalar" #~ msgid "No floppy drive available" #~ msgstr "Non hai ningunha disqueteira dispoñible" #, fuzzy #~ msgid "Please insert the Update Modules floppy in drive %s" #~ msgstr "Insira un disquete baleiro na unidade %s" #, fuzzy #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "Iugoslavo (latín)" #~ msgid "No network card" #~ msgstr "Non se atopou ningunha tarxeta de rede" #~ msgid "Use already installed driver (%s)" #~ msgstr "Usar o driver xa instalado (%s)" #~ msgid "You've not selected any font" #~ msgstr "Non seleccionou ningunha fonte" #~ msgid "http://www.mandrakelinux.com/en/101errata.php3" #~ msgstr "http://www.mandrakelinux.com/en/101errata.php3" #~ msgid "The Mandrakelinux 10.1 products are:" #~ msgstr "Os productos Mandrakelinux 10.1 son:"