# Translation of DrakX.po to Estonian. # Copyright (C) 2003 Free Software Foundation, Inc. # Riho Kurg , 1999-2003. # Marek Laane , 2002-2003. # msgid "" msgstr "" "Project-Id-Version: DrakX-et\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: 2003-12-02 09:20+0200\n" "Last-Translator: Marek Laane \n" "Language-Team: Estonian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "Partitsioonidelt haakepunktide otsimine" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "Kui on 'jah', kontrollitakse suid root failide lisamist/eemaldamist." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s nõuab masina nime, MAC aadressi, IP-d, nbi-laadepilti, 0/1 " "THIN_CLIENT puhul, 0/1 kohaliku seadistuse puhul...\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "Seadistust on muudetud - kas käivitada clusternfs/dhcpd uuesti?" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "\t\tPuhasta=%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Diferentsvarundus salvestab ainult pärast 'baasvarunduse' loomist muudetud " "või loodud failid." #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "võrguprinteri port" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "Sisestage palun flopi:" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "DrakTermServ" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Tabeli varukoopia ei ole sama suurusega\n" "Kas ikkagi jätkata?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "Milline kasutajanimi" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Millisele sektorile soovite seda tõsta?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "Taasta partitsioonitabel" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "Masinanime seadmine..." #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS serveril \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Paigaldusjärgne seadistamine" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" "Turvatase on praegu %s\n" "Valige, milliseid loabitte soovite näha/muuta" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Kasutage pigem ``%s''" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Tüüp" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Üle kanda ei saa ka printereid, mis on seadistatud nende tootjate pakutud " "PPD failidega või loomupäraste CUPS draiveritega." #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Teie süsteemiga on ühendatud\n" "\n" "%s%s\n" "printer(id)" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Kesk-Aafrika Vabariik" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Lüüsipoolne seade" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "Muud valikud" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "Võrgumeetod:" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "Võrgukaart" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Kui on lubatud, saadab meiliraporti sellele aadressile, muidu " "administraatorile." #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "Parameetrid" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "ei" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "Automaattuvastus" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "Liides:" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Valige paigaldusmeetod" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Paistab, et süsteem ei ole Internetti ühendatud.\n" "Palun seadistage ühendus uuesti." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Ühendage oma printer Linux-serveri külge ja lubage oma Windowsi masina(te)l " "sellega ühendust võtta kliendina.\n" "\n" "Kas soovite tõesti jätkata selle printeri seadistamist?" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "Valgevene" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Viga faili %s kirjutamisel" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "Kontrolli tulemused saadetakse syslog-i" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "Apmd on kasutusel põhiliselt sülearvutites akude täituvuse jälgimiseks.\n" "Samuti suudab see aku tühjenemisel süsteemi viisakalt seisata." #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "Varundamine lindile" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Paigaldamiseks on valitud järgmised paketid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "CUPSi seadistused" #: ../../standalone/drakbackup:1 #, c-format msgid "Total progress" msgstr "Edenemine kokku" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Paigutan ümber" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Drakbackupi tegevus %s vahendusel:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "jah" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "(" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Internetiühenduse nõustaja\n" "\n" "Nüüd hakkame Internetiühendust seadistama.\n" "Kui Te ei soovi automaatset tuvastamist, siis jätke see märkimata.\n" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr ")" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Liibanon" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "Peata" #: ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "Muuda valitud masinat" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "CD-seade on määramata!" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" "Palun sisestage Internetiühendust teostava seadme nimi.\n" " \n" "Näited:\n" " ppp+ modemi- või DSL ühenduse korral. \n" " eth0 või eth1 kaabliühenduse korral, \n" " ippp+ ISDN ühenduse korral.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tKasutatakse .backupignore faile\n" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "Bulgaaria (foneetiline)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "DHCP vahemiku alguse ip" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 kB" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "Linti ei kerita pärast varundamist algusse" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Alglaaduri põhiseadistused" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "Lint" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Malaisia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "Võrgu uurimine..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "Selle valikuga võite taastada kataloogi /etc suvalise versiooni." #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "Muutus on tehtud. Kas käivitada nüüd kuvahaldur uuesti ?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Šveitsi (Prantsuse asetus)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid ebaõnnestus (võib-olla puudub 'raidtools'?)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "August" #: ../../network/drakfirewall.pm:1 #, c-format msgid "FTP server" msgstr "FTP server" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "Veebikaamera" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "(Teise taseme) CPU puhvri suurus" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "Helikaart" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "Kuu" #: ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "Taastatavate failide otsimine" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Luksemburg" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Faili trükkimiseks käsurealt (terminaliaken) kasutage käsku \"%s \".\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Tase %s\n" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "Süüria (foneetiline)" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "Iraan" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Siin" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "Iraak" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to %s ..." msgstr "ühenduse loomine: %s ..." #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Võimalik kohtvõrgu aadressi konflikt %s seadistuses!\n" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "Seadistamine..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Enamiku moodsate TV-kaartide puhul avastab GNU/Linuxi kerneli bttv-moodul " "automaatselt õiged parameetrid.\n" "Kui kaart siiski valesti tuvastati, võite siin määrata õige tuuneri ja " "kaardi tüübi. Valige vajadusel korral sobivad TV-kaardi parameetrid" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Salasõna (uuesti)" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "Paigaldatud fontide otsimine" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "Vaikimisi töölaud" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" "Veateate edastamiseks vajutage nupule 'Raport'.\n" "See avab veebilehitseja akna aadressil %s,\n" "kus leiate eest täitmist ootava vormi. Ülal näidatud info kantakse\n" "serverile üle." #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Venezuela" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP aadress" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Valige suurused" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Vigaste andmete loend:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Saab haakida ainult otsesel märkimisel\n" "(st, et võti -a ei haagi failisüsteemi)." #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Teie modem ei ole toetatud.\n" "Ehk saate abi aadressilt http://www.linmodems.org" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "Valige muu partitsioon" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "Praegune kasutaja" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "Kasutajanimi" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "Vasakpoolne \"Windows\"-klahv" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Guyana" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "Dhcpd serveri seadistamine" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Kasutusel kataloogis:\n" " ainult faili või kataloogi omanik saab seda kustutada" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " Novelli serveril \"%s\", printer \"%s\"" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Name" msgstr "Printeri nimi" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "USB mälupulga seadistamine" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "Eemalda moodul" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Salasõna" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "Muud seadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Skaneerimine Teie HP mitmefunktsionaalsel seadmel" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Juur" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Valige olemasolev RAID, millele lisada" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Türgi (modernne \"Q\" mudel)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "LiLo sõnumit ei leitud" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Kerneli päise automaatne regenereerimine partitsioonil /boot\n" "/usr/include/linux/{autoconf,version}.h jaoks" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "kui vaja" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" "Võrguajaprotokolli lubamiseks\n" "on vaja paigaldada pakett ntp" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "Taastamine ebaõnnestus..." #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Parool salvestatakse selle süsteemi tarbeks drakbackupi seadistustes." #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Järgnev lõppkasutaja litsents on eksimuste vältimiseks originaalkeeles!\n" "\n" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "Vaikimisi kasutaja" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "edenemisriba ülemise vasaku\n" "nurga x-koordinaat" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "Liidese praegune seadistus" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LDP - Otsetrükkimisdeemon" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Kui Teil on ISA kaart, siis peaks järgmised väärtused olema õiged.\n" "\n" "Kui Teil on PCMCIA kaart, peate ise teadma selle IRQ ning IO väärtusi.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "Ära trüki testlehekülge" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "Gurmukhi" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "%s on juba kasutusel\n" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "APIC sunnitakse mitte toimima" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Salasõna on liiga lühike (peaks olema vähemalt %d tähemärki)" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "[klaviatuur]" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP vahendaja" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "Paigaldusloend" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "Muuda\n" "taastamise asukohta" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "Ainult valitud päeval näitamine" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tKettast lubatakse kasutada %s Mb\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 kB" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Märkus: paralleelporte ei tuvastata)" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "N" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Millist tüüpi kaart Teil on?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "O" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "Turvalisus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Valikute seadistamiseks ja trükkimistööde haldamiseks saab kasutada ka " "graafilist liidest \"xpdq\".\n" "Kui kasutate töölauakeskkonnana KDE-d, on Teil töölaual \"paanikanupp\", " "ikoon nimetusega \"PEATA printer!\", millele klõpsates peatatakse otsekohe " "kõik trükkimistööd. See on kasulik näiteks paberiummistuste esinemisel.\n" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakbackup:1 #, c-format msgid "Unable to find backups to restore...\n" msgstr "Varukoopiaid taastamiseks ei leitud...\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "Tundmatu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "See server on juba nimekirjas ja seda ei ole võimalik uuesti lisada.\n" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Võrgu seadistused" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "S" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protokoll ülejäänud maailma tarbeks\n" "Ilma D-kanalita (liisitud liinid)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ seadistab selle faili, et see saaks töötada koos " "laadepiltidega, mille\n" " \t\ttekitab mkinitrd-net, samuti kirjed failis /etc/dhcpd.conf, et " "pakkuda igale kettata\n" " \t\ttööjaamale alglaadimiseks laadepilti.\n" "\n" " \t\tTüüpiline tftp seadetefail näeb välja selline:\n" " \t\t\n" " \tservice tftp\n" " \t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tSiin tehtud muudatused võrreldes vaikepaigaldusega muudavad " "tühistamislipu\n" " \t\tväärtuseks 'no' ning kataloogirajaks muudetakse /var/lib/" "tftpboot, kuhu mkinitrd\n" " \t\tsalvestab oma laadepildid." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "Võti %s peab olema arv!" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "Märguanne" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Te ei ole seadistanud X-i. Kas Te tõesti ei taha seda teha?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "Printeri seadistused peaksid toimima täiesti automaatselt. Kui printer " "tuvastati valesti või Te eelistate seadistusi korrigeerida, lülitage sisse " "\"Käsitsiseadistamine\"." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "Mis tüüpi partitsioonid teete?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "FTP kaudu saadetud faililoend: %s\n" " " #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "Liides" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "Mitmeseansiline CD" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "komaga eraldatud stringi" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Nende masinate skännereid saab selle arvutiga kasutada:" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "Sõnumid" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Tundmatu|CPH06X (bt878) [paljud tootjad]" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "POP ja IMAP server" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "Mehhiko" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "Mudeli alamtüüp" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Rwanda" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Šveits" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Brunei" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Kas Teil on ikka mõni %s liides?" #: ../../standalone/drakTermServ:1 #, c-format msgid "You must be root to read configuration file. \n" msgstr "Seadistustefaili saab lugeda ainult administraator. \n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Võrguprinteri (lpd) seadistused" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux on paljude kasutajatega süsteem, mis tähendab, et igal kasutajal\n" "võivad olla oma eelistused, failid jne. Selle kontseptsiooni kohta leiab " "lähemat\n" "infot \"Kasutaja käsiraamatust\". Kuid erinevalt administraatorist ei ole\n" "kasutajal õigust muuta midagi muud kui vaid oma faile ja enda seadistusi.\n" "Te peaksite looma ka endale vähemalt ühe tavakasutaja konto, millele sisse\n" "logida igapäevategevuseks. Kuigi võib olla vägagi praktiline logida iga " "päev\n" "sisse administraatorina, võib see olla ka väga ohtlik! Vähimgi viga võib sel" "\\ puhul tähendada, et süsteem lakkab töötamast. Kui teete tõsise vea " "tavakasutajana,\n" "võite kaotada ainult mõningat infot, kuid süsteem jääb töökorda.\n" "\n" "Kõigepealt tuleks sisestada oma tegelik nimi. See ei ole mõistagi " "kohustuslik - tegelikult võite sisestada, mida soovite. DrakX võtab esimese " "sisestatud sõna\n" "ning kopeerib selle väljale \"%s\". See on siis nimi, mille all konkreetne " "kasutaja\n" "saab ennast süsteemi sisse logida. Seda saab ka hiljem muuta. Seejärel " "tuleb\n" "sisestada parool. Privileegideta (tavalise) kasutaja parool ei ole " "turvalisuse mõttes\n" "nii oluline kui administraatori oma, kuid pole põhjust sellest ka " "naljanumbrit teha:\n" "lõppeks on ju mängus Teie failid.\n" "\n" "Kui klõpsate nupule \"%s\", võite lisada veel nii palju kasutajaid, kui " "vaja.\n" "Lisage üks kasutaja iga inimese kohta, kes Teie arvutit kasutab. Kui olete " "kõik\n" "soovitud sisestanud, vajutage nupule \"%s\".\n" "\n" "Klõps nupule \"%s\" võimaldab muuta kasutajale määratavat vaike-\"shelli\"\n" "(vaikimisi on see bash).\n" "\n" "Kui olete kasutajate lisamise lõpetanud, pakutakse Teile valida kasutaja, " "kel on\n" "õigus logida süsteemi automaatselt, kui arvuti algkäivituse teeb. Kui see " "võimalus\n" "Teile huvi pakub (ja kohalik turvalisus muret ei valmista), valige " "meelepärane\n" "kasutaja ning aknahaldur ja vajutage \"%s\". Kui Te sellest aga huvitatud ei " "ole,\n" "eemaldage märge kastist \"%s\"." #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "Internetiühenduse seadistamine..." #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "Valige palun varundamiste vaheline ajaline intervall" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "Norra" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "Kustuta profiil" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Taani" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "Lülitab automaatselt alglaadimise ajal sisse NumLock-i." #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Palun andke IP parameetrid selle masina jaoks.\n" "Kõik read tuleb sisestada IP-aadressi kujul\n" "(näiteks 12.34.56.78)" #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" "Mandrake Linuxi paigalduspaketid on jagatud mitme CD-ROMi vahel. DrakX\n" "suudab ära tunda, kui valitud pakett asub muul CD-ROMil, ning väljastab " "siis\n" "seesoleva CD ja palub sisestada selle, mida parajasti vaja läheb." #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "Märkimise korral ei muudeta omanikku ja gruppi" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "Bulgaaria" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "Teisipäev" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "Protsessorid" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard ja Jan Mayen" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "Võrgukaarti pole valitud!" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Seadistamisel esines probleeme.\n" "Kontrollige oma ühendust net_monitor või mcc abil. Kui ühendus ei tööta, " "tuleks see uuesti seadistada." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "partitsioon %s kannab nüüd nime %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "Muude failide varundamine..." #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "Kongo (Kinshasa)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "SMB serveri IP" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Ketta %s partitsioonitabel salvestatakse!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "HPOJ pakettide paigaldamine..." #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n" "sõltumata tavalisest alglaadijast. See võib abiks olla, kui Te ei soovi\n" "LiLo-t (grubi) kõvakettale kirjutada või mõni muu operatsioonisüsteem LiLo\n" "ära kustutab või ei õnnestu LiLo-t Teie riistvara peal kasutada.\n" "Alglaadimisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n" "failisüsteemiga peaks mingi õnnetus juhtuma.\n" "Hoidke end ja Teid hoiab ka Jumal!\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " DrakBackup deemoni raport\n" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "Läti" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "kord kuus" #: ../../../move/move.pm:1 #, c-format msgid "Retry" msgstr "Proovi uuesti" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "Mooduli nimi" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "Käivitub alglaadimisel" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "Muutvarunduse kasutamine" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Ketta algusesse (MBR)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "El Salvador" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "Juhtkang" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "DVD" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "Unicode kasutamine vaikimisi" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "GNU/Linuxi kerneli moodul, mis käsitleb seda seadet" #: ../../standalone/drakclock:1 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Kas arvuti sisekell on seatud GMT ajale?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Proovin päästa partitsioonitabelit" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "Võti %s peab olema täisarv!" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "Salasõna kasutamine kasutajate autentimiseks" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Teil tuleb täita kirjed:\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Muule andmekandjale varundamisel luuakse failid algul kõvakettal ja alles " "seejärel liigutatakse muule andmekandjale. Selle valiku märkimine eemaldab " "pärast varundamist kõvakettalt tar-failid." #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Ei saa kiiruuendust alustada !!!\n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Nimi: " #: ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "ühendatud" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 miljonit värvi (24 bitti)" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "Lubatud kõigile kasutajatele" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "MandrakeSofti ametlik kauplusladu" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Muudan suurust" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Drakbackupi suurim\n" " lubatud suurus (Mb)" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "Kaabliühendus" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "Kasutaja" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "Uus varundamine enne taastamist (ainult muutvarunduse puhul)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid ebaõnnestus" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "Nimi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "Emuleeri 3. hiirenuppu" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "Sgid-failide lisamise/eemaldamise kontroll" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "Failide saatmine..." #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Iisraeli (foneetiline)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "ligipääs rpm vahenditele" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Printeri/seadme valimine/sisestamine on kohustuslik!" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "CD-le ligipääsul tekkis loaprobleem." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Sissehelistamiskeskuse number" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Viga: helikaardi juhtprogramm \"%s\" ei ole loendis" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "Printeri nimi, kirjeldus, asukoht" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "USA (tele)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "Kasuta Xinerama laiendusi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Loopback" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "Lääne-Euroopa" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "CD-R-ile" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" "[VÕTMED] [RAKENDUSE_NIMI]\n" "\n" "VÕTMED:\n" " --help - näitab käesolevat abiteadet.\n" " -report - rakendus peab olema üks Mandrake tööriistadest\n" " -incident - rakendus peab olema üks Mandrake tööriistadest" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "Harddrake2 versioon %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "Eelistused" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Svaasimaa" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Dominikaani Vabariik" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "%s kopeerimine" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "Värvi valimine" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "Süüria" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "Set-UID" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "Valige kõvaketas, mida soovite puhastada oma uue Mandrake Linuxi\n" "paigaldamiseks. Ettevaatust, kõik sellel leiduvad andmed hävitatakse\n" "ja neid ei saa enam taastada." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Kasutage valiku tegemiseks klahve %c ja %c." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Tavaline 2 nupuga hiir" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Märkimisel võib \"%s\" faili käivitada" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "Eemalda enne kettarühmad (logical volumes)\n" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Valik laetakse automaatselt %d sekundi jooksul" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "/etc/sysconfig/bootsplash kirjutamine ebaõnnestus\n" "Faili ei leitud." #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "Internetiühendus" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "tekstikasti y-koordinaat\n" "arvulises väljenduses" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Praeguse printeri puhul kasutuskõlblike valikute loendi vaatamiseks vajutage " "nupule \"Trükkimisvalikute loend\"." #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "Serverite käivitamine..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Trükitakse testlehekülg(i)..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Ülekanne oli edukas\n" "Võite kontrollida, kas suudate serverile sisse logida käsuga:\n" "\n" "ssh -i %s %s@%s\n" "\n" "ilma et Teilt küsitaks parooli." # c-format #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Haakepunktile %s on juba partitsioon määratud\n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Msec igatunnise turvakontrolli lubamine/keelamine" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "Olete jõudnud punkti, kus peate otsustama, kuhu täpselt Mandrake Linux\n" "oma kõvakettal paigaldada. Kui kõvaketas on tühi või mõni muu\n" "operatsioonisüsteem seda täielikult kasutab, on vaja partitsioneerida.\n" "Partitsioneerimine on tegevus, mille käigus tekitatakse kettale loogilised\n" "piirkonnad Teie uue Mandrake Linux süsteemi paigaldamiseks.\n" "\n" "Kuna partitsioneerimine ei ole pööratav protsess, siis peab kogemusteta\n" "kasutaja olema iseäranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n" "vigade vähendamiseks on Teie jaoks loodudki käesolev nõustaja. Siiski,\n" "palun varuge natuke ettevalmistusaega.\n" "\n" "Sõltuvalt kõvaketta omadustest on ketta jagamiseks ehk partitsioneerimiseks\n" "mitmeid võimalusi.\n" "\n" " * \"%s\": see partitsioneerib lihtsalt Teie tühja(d) kõvaketta(d).\n" "Mingeid edasisi küsimusi ei esitata.\n" "\n" " * \"%s\": nõustaja avastas kõvakettal vähemalt\n" "ühe Linuxi partitsiooni. Kui soovite seda/neid kasutada, valige see " "võimalus.\n" "Seejärel palutakse valida iga partitsiooniga seonduvad haakepunktid. " "Vaikimisi\n" "valitakse need juba ette ära ja üldiselt oleks mõistlik neid mitte muuta.\n" "\n" " * \"%s\": kui kõvakettale on paigaldatud\n" "Microsoft Windows ja see haarab enda alla kogu kõvaketta, võite luua vabale\n" "alale nurgakese Linuxi andmetele. Selleks võib hävitada Microsoft Windowsi\n" "partitsiooni koos andmetega (vaata võimalusi \"Puhasta kogu ketas\" või\n" "\"Ekspertresiim\") või selle suurust muuta. Viimast on võimalik sooritada " "ilma\n" "andmeid kaotamata, seda küll eeldusel, et olete varem Windowsi partitsiooni\n" "defragmenteerinud. Siiski ei tule kindlasti kahjuks ka andmetest varukoopia\n" "valmistamine... See lahendus on soovitatav, kui tahate kasutada ühel " "arvutil\n" "nii Mandrake Linuxit kui Microsoft Windowsit.\n" "\n" " Enne selle valiku kasuks otsustamist pidage silmas, et kirjeldatud " "protseduuri\n" "järel on Teie Microsoft Windowsi partitsioon senisest väiksem, mis tähendab, " "et\n" "sellel on ka vähem ruumi andmete salvestamiseks või uue tarkvara " "paigaldamiseks.\n" "\n" " * \"%s\": kui soovite kustutada kõik andmed ja partitsioonid, mis\n" "kõvakettal parajasti on, ning asendada need uue Mandrake Linuxi süsteemiga, " "on\n" "see õige valik. Aga tasub olla ettevaatlik, sest pärast selle valiku " "langetamist\n" "tagasiteed enam ei ole...\n" "\n" " !! Kui valite selle võimaluse, kaotate kõik kõvakettal olevad andmed. !!\n" "\n" " * \"%s\": see puhastab kõvaketta senistest andmetest ja\n" "käivitab uue paigaldusprotsessi, luues kõik partitsioonid uuesti. Kaovad ka\n" "kõik kettal olnud andmed.\n" "\n" " !! Kui valite selle võimaluse, kaotate kõik kõvakettal olevad andmed. !!\n" "\n" " ' \"%s\": valige see, kui soovite ise kontrollida kõvaketta jagamist\n" "partitsioonideks. Kuid olge ettevaatlik - see on küll võimas, aga ohte " "sisaldav\n" "valik, mille puhul võib kergesti kaotada olemasolevad andmed. Seepärast ei\n" "peaks seda valima, kui Te pole endas päris kindel. Täpsemalt saab teada,\n" "kuidas kasutada DiskDrake võimalusi, \"Käivitusjuhiste\" osast " "\"Partitsioonide\n" "haldamine\"." #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "Ukraina" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "Rakendus:" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "Väline ISDN modem" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "Kui on 'jah', antakse kontrolli tulemustest teada meilitsi." #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Teie valik? (vaikimisi %s)" #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "Probleemi otsimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Testlehekülg on saadetud printerile.\n" "Nüüd võib minna natuke aega, enne kui printer alustab.\n" "Staatus:\n" "%s\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "kord päevas" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "ja üks tundmatu printer" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "Iirimaa" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr " Taastamise seadistamine " #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "Kas see on sobiv?" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Nüüd võite seadistada oma Interneti-/võrguühenduse. Kui soovite, et arvuti\n" "oleks ühendatud Internetti või kohtvõrku, vajutage \"%s\". Seejärel " "käivitub\n" "võrguseadmete ja modemi automaattuvastus. Kui see ei õnnestu, jätke\n" "järgmisel korral kastike \"%s\" märkimata.\n" "Muidugi võib ka võrgu seadistamisest loobuda või seda hiljem teha.\n" "Sellisel juhul vajutage nupule \"%s\".\n" "\n" "Võimalikud ühendusviisid on: tavaline modem, ISDN modem, ADSL ühendus,\n" "kaablimodem ning lõpuks kohtvõrk ehk LAN (Ethernet).\n" "\n" "Siinkohal ei hakka me kogu seadistamist lahti seletama. Kontrollige " "lihtsalt, et\n" "oleksite oma internetiteenuse pakkujalt või süsteemi administraatorilt " "saanud\n" "kõik võrguühendusega seonduvad parameetrid.\n" "\n" "Seadistamisest kõneleb lähemalt \"Käivitusjuhiste\" Internetiühendusest " "pajatav\n" "peatükk, kuid võib ka oodata, kuni süsteem on paigaldatud ja kasutada siis\n" "ühenduse seadistamiseks seal kirjeldatud rakendust." #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "Nõustaja seadistamine" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Proovida niisama" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "Kui on 'jah', kontrollitakse:\n" "\n" "- tühja salasõna,\n" "\n" "- salasõna puudumist /etc/shadow-s\n" "\n" "- kasutajaid ID-ga 0, kes pole administraatorid." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "Süsteemsete failide varundamine..." #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Üldlevi kasutamine on ilma NIS domeenita võimatu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "Printeri \"%s\" eemaldamine..." #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "Shelli puhvri suurus" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Andke palun faili auto_install.cfg asukoht.\n" "\n" "Jätke tühjaks, kui Te ei soovi määrata automaatpaigalduse resiimi.\n" "\n" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on other machines" msgstr "Seadistatud muudel masinatel" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "Infotase, mida võib saada cpuid instruktsiooni vahendusel" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Peruu" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr " seadmel: %s" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Eemalda Windows(TM)" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "Käivitab X fondiserveri, ilma milleta X lihtsalt ei lähe käima." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Enamik väärtusi on võetud Teie töötavast\n" "süsteemist. Võite neid vajadusel muuta." #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Valige fondifail või kataloog ja klõpsake 'Lisa'" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "Cron-i saab praegu kasutada ainult administraator" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "Süsteem" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "Kas soovite kasutada seda omadust?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "Araabia" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Valikud:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "Parooli nõudmine" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d minutit" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Graafikakaart: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "WebDAVi ülekanne ebaõnnestus!" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "XFree seadistused" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Valige tegevus" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Prantsuse Polüneesia" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "Tavaliselt tuvastab DrakX hõlpsasti, mitme nupuga hiirt Te kasutate. Kui\n" "see välja ei tule, eeldatakse, et Teil on kahe nupuga hiir, ning " "kasutatakse\n" "kolmanda nupu emuleerimist. Kahenupulisel hiirel saab kolmandat nuppu\n" "\"vajutada\" üheaegselt vasakut ja paremat nuppu vajutades. DrakX tuvastab\n" "automaatselt, kas tegemist on PS/2, jadapordi või USB-hiirega.\n" "\n" "Kui soovite muuta hiiretüüpi, valige pakutud nimekirjast sobiv tüüp.\n" "\n" "Kui valite mõne muu hiiretüübi kui vaikimisi määratu, palutakse Teil seda\n" "testida. Kasutage nuppe ja ratast kontrollimaks, et valik oli õige. Kui\n" "hiir ei käitu korralikult, vajutage tühikuklahvi või klahvi [Return], mis " "viib\n" "Teid tagasi dialoogi ja lubab sooritada uue valiku.\n" "\n" "Vahel ei õnnestu rattaga hiirt automaatselt tuvastada. Siis tuleb see " "loendist\n" "käsitsi valida. Kontrollige, et valite õigesse porti ühendatud hiiretüübi. " "Kui\n" "vajutate nupule \"%s\", näidatakse hiire kujutist. Siis tuleb Teil " "liigutada\n" "hiireratast, et see korrektselt aktiveerida. Seejärel testige, kas kõik " "nupud\n" "ja liigutused toimivad korralikult." #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Toetab OKI 4w ja sellega ühilduvaid winprintereid." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "Kataloogipuu tipus failis .backupignore loetletud faile või metamärkidega " "tähistatud faile ei varundata." #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Helisüsteemi ALSA (Advanced Linux Sound Architecture) käivitamine" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Juhtprogrammi %s paigaldamine kaardile %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Kandsite üle oma senise vaikeprinteri (\"%s\"). Kas see peaks olema " "vaikeprinter ka uue trükkimissüsteemi %s puhul?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "Serveri lubamine" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Ukraina" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Võrguühendus ei töötanud ja seda ei saa ka käivitada. Kontrollige palun oma " "seadistusi ja riistvara. Seejärel proovige uuesti seadistada võrguprinterit." #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Märkimisel võib \"%s\" faili kirjutada" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Pange palun alglaadimisflopi seadmesse %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "Kohalik võrk" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "Eemalda Windows" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "Teie %s skänner on seadistatud.\n" "Nüüd võite skaneerida dokumente, kasutades selleks rakendust \"XSane\", " "mille leiate rakenduste menüüs rubriigist Multimeedia/Graafika." #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "Firewire kontrollerid" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "Kui olete määranud alglaaduri üldised parameetrid, näidatakse loendit\n" "alglaadimise ajal kasutatavatest valikutest.\n" "\n" "Kui masinale on paigaldatud veel mõni operatsioonisüsteem, lisatakse see\n" "automaatselt alglaaduri menüüsse. Siin saate olemasolevaid valikuid oma\n" "maitse järgi häälestada: klõpsates nupul \"%s\" saate uue kirje lisada,\n" " \"%s\" või \"%s\" võimaldab kirjet muuta või eemaldada.\n" "\"%s\" viib Teid paigalduse järgmise sammu juurde.\n" "\n" "Teil võib muidugi olla ka soov mitte anda kellelegi ligipääsu teistele\n" "operatsioonisüsteemidele, millisel juhul võite vastavad kirjed kustutada.\n" "Aga siis läheb Teil kindlasti vaja alglaadimisketast, et ka ise neile ligi " "pääseda!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "Töömood" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Et kasutada NetWare printerit, peate sisestama NetWare printserveri nime " "(NB! See võib olla erinev tema TCP/IP nimest!), samuti trükijärjekorra nime " "serveril ning kasutajatunnuse ja salasõna." #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "Võrgumask:" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "Tee seda hiljem" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Lisand" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Värskenda printeriloendit (näitamaks kõiki saadaolevaid CUPS printserveri " "printereid)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Kui see on sisse lülitatud, konrollitakse CUPSi igal käivitamisel " "automaatselt, et\n" "\n" "- kui LPD/LPRng on paigaldatud, ei kirjutaks CUPS üle faili /etc/printcap\n" "\n" "- kui /etc/cups/cupsd.conf puudub, see loodaks\n" "\n" "- kui printeriinfo läheb üldlevisse, ei ole seal serveri nimeks \"localhost" "\".\n" "\n" "Kui mõni neist sammudest tekitab probleeme, lülitage võimalus välja, aga " "siis peate nende eest ise hoolt kandma." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Automaatne paigaldus võib olla ka sedavõrd tegija,\n" "et kasutab ära kogu kõvaketta !!\n" "\n" "Võite valida ka lihtsalt paigalduse kordamise.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Võrguprinter \"%s\", port %s" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Palun valige, millist võrguliidest soovite kasutada kohtvõrgu jaoks." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "Muude failide taastamiseks vajutage 'Olgu'." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "Palun valige klaviatuuriasetus." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "Printeri seadme URI" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "Seda andmekandjat ei saa puhastada!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "Terminalipõhine" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "IP võltsimiskaitse lubamine/keelamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Trükkimissüsteemi paigaldamine turvatasemel '%s'" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "See kasutajanimi on liiga pikk" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Muu OS (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "WebDAVi kaugsait on juba sünkroonis!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "Printeri andmebaasi lugemine..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "Loo kiirpaigaldusflopi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t kasutajatunnus: %s\n" "\t\t asukohas: %s \n" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "Somaalia" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "Vabavara-juhtprogramm puudub" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "Vaik." #: ../../security/level.pm:1 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "See sarnaneb eelmisele tasemele, ainult et süsteem on täiesti suletud ja " "turvaseadistused maksimumi peale keeratud." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Nicaragua" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Uus-Kaledoonia" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "Euroopa protokoll (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/_Kustuta" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Graafikamood" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "Omaan" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "Sisestage palun siia oma e-posti aadress" #: ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "Võrgu jälgimine" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "Uus suurus (MB): " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Partitsioonitabeli tüüp: %s\n" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "Windowsi domeeni autentimine" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "USA" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "Nuppude emuleerimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", võrguprinter \"%s\", port %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Drakbackupi tegevus lindi vahendusel:\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " FTP ühenduse probleem: FTP kaudu pole võimalik saata Teie varukoopiafaile.\n" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "Saatmise kiirus:" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Klassikaline võimalus Teie arvuti heliprobleeme kindlaks teha on käivitada " "järgmised käsud:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" näitab, millist draiverit Teie\n" "helikaart vaikimisi kasutab\n" "\n" "- \"grep sound-slot /etc/modules.conf\" näitab, millist draiverit\n" "praegu kasutatakse\n" "\n" "- \"/sbin/lsmod\" näitab, kas vastav moodul (draiver) on hetkel laetud\n" "\n" "- \"/sbin/chkconfig --list sound\" ja \"/sbin/chkconfig --list alsa\"\n" "näitavad, kas teenused \"sound\" ja \"alsa\" käivituvad.\n" "\n" "- \"aumix -q\" näitab, kas heli pole mitte summutatud (M - mute)\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" näitab, milline programm hetkel\n" "helikaarti kasutab.\n" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "Seiskamisviga" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "Meilihoiatuse seadistused" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Tokelau" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "Sobib" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "Bosnia" #: ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "Väljalase: " #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "Ühenduse kiirus" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Namiibia" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "Andmebaasi server" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "ketta eriomadused (nt. kirjutamine ja/või DVD tugi)" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada" #: ../../standalone/drakclock:1 #, c-format msgid "Network Time Protocol" msgstr "Võrguajaprotokoll" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n" "SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE.\n" "Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi." #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "Palun oodake, sätin turvaparameetreid..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Tundmatu|CPH05X (bt878) [paljud tootjad]" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Käivita X Windows alglaadimisel" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "kord tunnis" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "Parempoolne Shift-klahv" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr " edukalt taastatud %s -l " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "Printer tehakse CUPS-ile kättesaadavaks" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua ja Barbuda" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Näitab, et parool antud süsteemis erineb sellest, mida teab\n" "terminalserver.\n" "Palun kustutage ja looge see kasutaja terminalserveris uuesti, et " "võimaldada\n" "sisselogimist." #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Hispaania" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "Käivita" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "Administraatori otsesisselogimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "Rakenduste seadistamine..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printeri seadistamise nõustaja\n" "\n" "Nõustaja aitab Teil paigaldada printeri(d), mis on ühendatud selle arvutiga, " "otse võrku või võrgus asuva Windowsi masinaga.\n" "\n" "Kui Teil on printer(eid), mis on ühendatud selle masinaga, ühendage see/need " "palun arvutiga ja lülitage sisse, et seda/neid oleks võimalik automaatselt " "tuvastada. Ka võrguprinter(id) ja Windowsi-masinad peavad olema ühendatud ja " "sisse lülitatud.\n" "\n" "Pange tähele, et võrguprinteri(te) automaattuvastus võtab rohkem aega kui " "ainult selle masinaga ühendatud printeri(te) tuvastamine. Nii et kui teil " "seda vaja ei ole, lülitage võrgus ja/või Windowsi taga olevate printeri(te) " "automaattuvastus välja.\n" "\n" "Kui olete valmis, vajutage \"Järgmine\", või \"Katkesta\", kui Te ei soovi " "printeri(te) seadistamisega praegu tegelda." #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "Tavaline modemiühendus" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "Failivalik" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "CUPS" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "Lint puhastatakse enne varundamist" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "Seadistamisvahendi kävitamine" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Alglaaduri paigaldus" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Juurpartitsiooni suurus (MB): " #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "See pakett on kohustuslik" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" " - Etherbooti flopide/CD-de loomine:\n" " \tKettata tööjaamad vajavad kas ROM-laadepilti võrguliidesel või " "alglaadimisflopit\n" " \tvõi -CD-d alglaadimise käivitamiseks. drakTermServ aitab neid " "laadepilte luua,\n" " \ttuginedes kliendi masina võrguliidesele.\n" " \t\t\n" " \tLihtne näide alglaadimisflopi loomisest käsitsi 3com 3c509 jaoks:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "Etherboot ISO-laadefail on %s" #: ../../services.pm:1 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) on kasutusel nimeserverites, mis teenindavad DNS hierarhiat, " "tõlkimaks nimesid IP-aadressideks." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Saint Lucia" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "November" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "Lahuta..." #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "Raport" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Belau" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "tase" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" "Iga teadet jälgib ja lahendab konkreetne ja kvalifitseeritud MandrakeSofti " "tehniline töötaja." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Paketigruppide valik" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "Kohalik riistvara\n" "seadistus on lubatud." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Taastamine võrguprotokolli abil: %s" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "Siin saab seadistada mooduli kõiki parameetreid." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Valige kuvatihedus ja värvisügavus" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "Kas emuleerida keskmist hiirenuppu?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Uut partitsiooni ei saa luua\n" "(sest primaarseid partitsioone on juba maksimaalselt).\n" "Eemaldage kõigepealt mõni primaarne partitsioon ja \n" "tekitage laiendatud partitsioon." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Haagi" #: ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "Automaatpaigaldusflopi loomine" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "Uuenduste paigaldus" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "tekstikasti kõrgus" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "Olek" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Kontrollige, et andmekandja on seadmes %s" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Mitme profiili lubamine" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "Failisüsteemis ei interpreteerita märgi- või blokieriseadmeid." #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Need valikud võivad varundada ja taastada kõik failid kataloogis /etc.\n" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Kohalik printer" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "Taastatud failid..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "Pakettide valik" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Mauritaania" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Teie praegune seadistus on võimalik säilitada ja eeldada, et DHCP server on " "juba seadistatud. Sellisel juhul kontrollige, et võrk, mida kasutate " "kohtvõrgu tarbeks, on õigesti tuvastatud. Seda ei hakata ümber seadistama " "ega Teie DHCP serveri seadistust muutma.\n" "\n" "Vaikimisi DNS kirje on tulemüüri poolt seadistatud puhverdav nimeserver. See " "on võimalik asendada näiteks Teie ISP DNSi IP-ga.\n" "\t\t \n" "Vastasel juhul seadistan Teie liidese ümber ja seadistan (ümber) ka DHCP " "serveri.\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Kohalikku printerit ei leitud! Printeri paigaldamiseks käsitsi märkige " "sisendireale seadmenimi/failinimi (paralleelpordid: /dev/lp0, /dev/lp1..., " "mille vasteks teistes süsteemides on LPT1, LPT2...; esimene USB printer: /" "dev/usb/lp0, teine USB printer: /dev/usb/lp1...)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Kõik primaarsed partitsioonid on kasutusel" #: ../../printer/main.pm:1 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "LPD serveril \"%s\", printer \"%s\"" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Soovitame uuesti käivitada ka X keskkonna, et vältida võimalikke\n" "masinanime muutmisest tingitud probleeme." #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Riistvara automaatne tuvastamine ja seadistamine alglaadimisel." #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "Paigaldusserveri seadistamine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "IDE seadistamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "Võrguvalmidus on seadistamata" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "Mooduli seadistamine" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kookosesaared" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Muudatuste rakendamiseks vajate alglaadimist" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Sissehelistamiskeskuse number" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "Masin %s" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "Fidži" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "Armeenia" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Teine flopiseade" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "HardDrake info" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "X Window TCP ühenduste autentimine" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "Ketta eriomadused" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Pange tühi flopi masinasse\n" "Kõik andmed sellel hävivad" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Suurus: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Ctrl- ja Shift-klahvid korraga" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "teisene" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "Varundamise seadistuste vaatamine" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "Kui on 'jah', saadetakse kontrolli tulemused syslog-i." #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Salasõna puudub" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "Nigeeria" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s nõuab masina nime...\n" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Kasutatavat partitsiooni ei leitud" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Teie süsteemiga on ühendatud\n" "\n" "%s\n" "skännerid.\n" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Mitme funktsiooniga seade paralleelpordis #%s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Et kasutada TCP/Socket printerit, tuleb määrata printeri masinanimi või IP " "ning kui teate, ka pordi number (vaikimisi on see 9100). HP JetDirect " "serveritel on pordi number tavaliselt 9100, teistel serveritel võib see olla " "teistsugune. Kontrollige seda oma riistvara käsiraamatust." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "Kõvaketta info" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Vene" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "Jordaania" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "Failide peitmine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Selle masinaga ühendatud printerite automaattuvastus" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Flopiseade ei ole kättesaadav" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Boliivia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Seadistage oma Windows-server nii, et printer oleks kättesaadav IPP " "protokolliga, ning seadistage trükkimine sellelt masinalt \"%s\" " "ühendustüübiga Printerdrakes.\n" "\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Vigane pakett" #: ../advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" "Kujundage vaid mõne hiireklõpsuga enda masinast võimas Linuxi server: " "veebiserver, meili-, tulemüüri-, marsruutimis-, faili- ja printserver..." #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSeci põhiseadistused" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Märkus: kui Teil on ISA PnP helikaart, tuleb kasutada rakendust sndconfig. " "Selleks kirjutage käsureale \"sndconfig\"." #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "Rumeenia" #: ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "Grupp" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "Kanada" #: ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "valige seade" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Eemalda LVMist" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "Ajavöönd" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Saksa" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "Järgmine ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Selle lubamine võimaldab trükkida jaapanikeelseid tekstifaile. Kasutage seda " "ainult siis, kui soovite tõesti jaapanikeelseid tekste trükkida, sest kui " "see on sisse lülitatud, ei ole enam võimalik trükkida ladina tähestiku " "diakriitiliste märkidega tähti ega kohandada veeriseid, märgisuurust jne. " "See puudutab ainult käesoleva masinaga ühendatud printereid. Kui soovite " "trükkida jaapanikeelset teksti võrgus asuva masinaga ühendatud printeril, " "tuleb see funktsioon tollel masinal sisse lülitada." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Võimalik, et on tegemist\n" "juhtpartitsiooniga, parem oleks\n" "seda mitte puutuda.\n" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "Guinea-Bissau" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Realaotussagedus" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "Muuda" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Seda haakepunkti ei saa eemaldada, sest partitsioon on kasutusel\n" "loopback-ina. Eemaldage esmalt loopback" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "Paigalduse ajal seadistatud võrku ei õnnestu praegu käivitada. Kontrollige " "palun, kas võrk on kättesaadav pärast süsteemi uut alglaadimist, ning " "korrigeerige seadistust Mandrake Juhtimiskeskuse sektsioonis \"Kohtvõrk ja " "Internet\"/\"Ühendus\", misjärel seadistage printer samuti Juhtimiskeskuses, " "aga sektsioonis \"Riistvara\"/\"Printer\". " #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "USB kontrollerid" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "Millist TV-standardit Te kasutate?" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "Tüüp: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Jagatav printer" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "lubada" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Proovin hankida Mandrake Linuxi veebisaidilt saadaolevate peeglite " "nimekirja..." #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Võrgu taaskäivitamisel tekkis viga: \n" "\n" "%s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "Kas eemaldada loopback fail?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "Valiku suurus ületab saadaolevat kettaruumi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "NCP serveri nimi puudub!" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "Palun valige oma maa." #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "Kõvaketta varundamine..." #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "Laose" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Samoa" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Protokoll rstat laseb üle võrgu saada informatsiooni\n" "süsteemi töö kohta. Ettevaatust!" #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Seadistatud skännerite nimekirja taasloomine..." #: ../../modules/interactive.pm:1 #, c-format msgid "Module configuration" msgstr "Mooduli seadistamine" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "Skänner" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Hoiatus: selle graafikakaardi test võib Teie arvuti peatada" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Kasutajanimi tohib sisaldada ainult väikesi tähti, numbreid ning märke '-' " "ja '_'" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "Menudrake" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Tere tulemast, kräkkerid" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Mooduli parameetrid:" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "Tagage oma võrkude turvalisus MNF (Multi Network Firewall) abil" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "Jätkata ilma võrku seadistamata" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Loobu" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "Parooli ei pärita masinal %s pordis %s" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse ratta emuleerimisega" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "Võrguskänneri kasutamine" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Teie Windowsi partitsioon on fragmenteerunud. Palun tehke arvutile uus " "alglaadimine, käivitage Windows ja seejärel utiliit 'defrag' ning tulge siis " "Mandrake Linuxi paigalduse juurde tagasi." #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norra)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Kõvaketta varundamise edenemine..." #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "Fork ebaõnnestus: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Tüüp: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "<-- Muuda klienti" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "fonte ei leitud" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "Hiir" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "/boot on liiga täis" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "püüan välja pakkuda %s" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Masinanimi" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "edenemisriba värv" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "Fondifailide kustutamine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Lisa RAIDi" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "Yabooti jaoks on võimalik lisada kirjeid kas teiste operatsioonisüsteemide,\n" "alternatiivsete kernelite või hädaolukorras alglaadimistõmmise leidmiseks.\n" "\n" "Teiste operatsioonisüsteemide kirje sisaldab vaid pealdist ja " "juurpartitsiooni.\n" "\n" "Linuxi puhul on võimalusi rohkem:\n" "\n" " * Pealdis: lihtsalt nimetus, mida tuleb kirjutada, kui yaboot pärib teilt " "alglaadimise\n" "ajal, mida laadida.\n" "\n" " * Laadepilt: alglaaditava kerneli nimetus, tavaliselt vmlinux laiendiga või " "ilma selleta.\n" "\n" " * Juur: juurseade ehk Teie Linuxi ``/''.\n" "\n" " * Lisand: eriti Apple'i puhul kasutatakse kerneli lisa sageli " "videoriistvara lähtestamiseks\n" "või hiirenupu emuleerimiseks klaviatuuril, sest Apple'i riistvarapoodides on " "vaid\n" "harva näha kahe või kolme nupuga hiiri. Mõned näited:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: seda võimalust võib kasutada kas initsialiseerimismoodulite " "laadimiseks\n" "enne alglaadimisseadmeni jõudmist või ramdisk-laadepildi laadimiseks\n" "hädaolukorras.\n" "\n" " * Initrd-size: ramdiski suurus on tavaliselt 4096 baiti. Kui teil peaks " "minema\n" "tarvis suuremat, saab seda siin määrata.\n" "\n" " * Read-write: tavaliselt initsialiseeritakse juurpartitsioon esmalt vaid " "loetavana,\n" "et sooritada failisüsteemi kontroll enne seda, kui süsteem ``ellu ärkab''.\n" "Siin saab seda muuta.\n" "\n" " * NoVideo: kui Apple'i videoriistvara peaks väga tõsiseid probleeme " "tekitama,\n" "saab siin valida võimaluse teha alglaadimine resiimis ``novideo'' ehk siis\n" "native frame-buffer toega.\n" "\n" " * Vaikimisi: määrab antud kirje vaikimisi Linuxi valikuks, mida saab " "alglaadida\n" "yabooti käsurea ilmudes vaid vajutusega klahvile ENTER. Kui vajutate " "alglaadimise\n" "valikute uurimiseks [Tab], on see kirje tähistatud tärniga (``*'')." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "Printer \"%s\" lisati edukalt StarOffice/OpenOffice.org/GIMP-ile." #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "Flopiseade ei ole kättesaadav!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Seda, millised valikud on saadaval praeguse printeri puhul, saab teada kas " "allpool seisvast loendist või pärast vajutust nupule \"Trükkimisvalikute " "loend\".%s%s%s\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Saudi Araabia" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "Internet" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Kas ikkagi jätkata?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Kui Teie printerit loendis ei leidu, valige mõni ühilduv (vaadake printeri " "käsiraamatust) või sarnane." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Printer" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "Mõned seadmed lisati:\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Trükkimine printeril \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "/etc/hosts.allow ja /etc/hosts.deny on juba seadistatud - ei muudeta" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "Taastamine lindilt" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" "Veateate edastamiseks vajutage nupule 'Raport'.\n" "See avab veebilehitseja akna Anthillis, kus saate ülal näidatud info " "veateatena edastada." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "Valige profiil, mida seadistada" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Salasõna miinimumpikkus ning numbrite ja suurtähtede hulk" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" "\n" "\n" "Sisestage Zeroconfi masina nimi (ilma punktideta), kui Te\n" "ei soovi kasutada vaikimisi antud masina nime." #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "Varunda seadistustefail kohe!" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Haakepunkti nimi tohib sisaldada vaid tähti ja numbreid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "Trükkimissüsteemi taaskäivitamine..." #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "Töötada saab ainult ilma CD-ROM toetuseta" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Info riistvara kohta" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "Päev" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Partitsiooni algusesse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "Printeri tootja, mudel" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Trüki kohe" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[VÕTMED]...\n" "Mandrake terminaliserveri seadistaja\n" "--enable : lubab MTSi\n" "--disable : keelab MTSi\n" "--start : käivitab MTSi\n" "--stop : peatab MTSi\n" "--adduser : lisab olemasoleva kasutaja MTSile (nõutav on " "kasutajanimi)\n" "--deluser : kustutab olemasoleva kasutaja MTSist (nõutav on " "kasutajanimi)\n" "--addclient : lisab kliendimasina MTSile (nõutav on MAC-aadress, IP, " "nbi laadepildi nimi)\n" "--delclient : kustutab kliendimasina MTSist (nõutav on MAC-aadress, IP, " "nbi laadepildi nimi)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "Alamvõrgu mask:" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Salasõna aegumise ja konto tühistamise viivituse määramine" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "Koormus" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Kaks kriitilist suurust on ekraanisagedus, mis määrab kogu kuva\n" "uuendamise aja, ja realaotussagedus\n" "\n" "On VÄGA TÄHTIS, et Te ei määraks siinkohal monitori, mille realaotus on\n" "suurem, kui Teie monitor võimaldab. Vastasel juhul võib Teie monitor " "hävida.\n" "Kui kahtlete, valige pigem väiksem väärtus." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "Muuda" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Käsud \"%s\" ja \"%s\" võimaldavad samuti muuta konkreetse trükkimistöö " "valikuid. Selleks tuleb vaid lisada soovitud valikud käsureale, näiteks \"%s " "\".\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "Vaja läheb masinanime, kasutajatunnust ja parooli!" #: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "Sisestage flopi" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV on protokoll, mis võimaldab haakida veebiserveri kataloogi\n" "kohalikult ning käsitleda seda kui kohalikku failisüsteemi (eeldusel, et\n" "veebiserver on seadistatud WebDAV-serverina). Kui soovite lisada\n" "WebDAVi haakepunkte, vajutage nupule \"Uus\"." #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "HardDrake" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "uus" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Syslog-i teadete konsoolile 12 saatmise lubamine/keelamine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "Kas soovite uuesti proovida?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Nõustaja" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "Valitud serveri muutmine" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "Valige palun, kuhu soovite varukoopia salvestada" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Partitsioonitabeli säilitamiseks vajate alglaadimist" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "Veebilehitseja mälupuhvri kõrvalejätmine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Failisüsteemi %s kontroll ebaõnnestus. Kas soovite vigu parandada? " "(Ettevaatust, võite kaotada andmed!)" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Palun valige klaviatuuriasetus." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Standardne" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "Palun valige hiire tüüp." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "Ühenda..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Printeri \"%s\" seadistamine ebaõnnestus!" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "seadistamata" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "Misvärk" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Vahendajate seadistused" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Algus: sektor %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "Mask puudub" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "Võrguliides on juba seadistatud" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "Ei suuda flopit leida!" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "Meiliserver" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Palun valige partitsioon" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Mitme funktsiooniga seade HP JetDirectil" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "Peatse jällenägemiseni!" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "%s uuendus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Valige printeri ühendusviis" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Telekanalite otsingu edenemine ..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "Viga faili saatmisel FTP kaudu.\n" " Palun korrigeerige FTP seadistusi." #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "IP vahemiku algus:" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Interneti \"superserver\" nimega inetd laseb käivituda mitmetel võrgu-\n" "teenustel, nagu telnet, ftp, rsh, rlogin jne. Inetdi keelamine keelab\n" "ka kõik teenused, mida see haldab." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "edenemisriba kõrgus" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Salvestamine %s vahendusel masinale: %s\n" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Argentina" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "Nimeserver" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "Turvatase:" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Haakepunktid peavad algama kaldkriipsuga (/)" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "CD/DVD-seade" #: ../../network/drakfirewall.pm:1 #, c-format msgid "CUPS server" msgstr "CUPS server" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "Postfix meiliserver" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Välju ilma salvestamata" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Jeemen" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "See toode on saadaval MandrakeStore veebisaidil" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Nüüd on Teil mitmeid valikuid (%s).\n" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "Tekkis viga:\n" "\n" "\n" "%s\n" "\n" "Selle põhjus võib olla vigaste süsteemsete seadistusfailide\n" "olemasolu USB mälupulgal, millisel juhul eemaldage failid ja\n" "taaskäivitage Mandrake Move, mis peaks asjad korda tegema.\n" "Selleks klõpsake vastaval nupul.\n" "\n" "\n" "Te võite ka teha taaskäivituse ja ühendada mälupulga lahti\n" "või uurida selle sisu mõnes muus operatsioonisüsteemis või ka\n" "vaadata logifaile konsoolil 3 ja 4, et aru saada, mis siis lahti on." #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Kõvaketta leidmine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Te ei valinud ühtegi paketigruppi.\n" "Palun valige meelepärane minimaalne paigaldus:" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Teil läheb vaja Alcateli Microcode'i.\n" "Te võite nüüd selle paigaldada flopilt või Windowsi partitsiiinil\n" "või ka sammu vahele jätta ja hoopis hiljem paigaldamise ette võtta." #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Palun sisestage WebDAV-serveri URL" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Tadžikistan" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Nõus" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "Kirjeldus" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "Palun sisestage kokkuvõte." #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "%s avamine kirjutamiseks ebaõnnestus: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Hiire tüüp: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Valige monitor" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Tühi kirjetähis ei ole lubatud" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "Malta (briti)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Partitsioone ei saa enam lisada" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Suurus (MB): " #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Võrguprinter" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "Valige palun kasutatav keel." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "HOIATUS: See seade on juba seadistatud Interneti jaoks.\n" "Valige lihtsalt 'Olgu', et seadistust mitte muuta.\n" "Allolevate väljade muutmine tühistab varasema seadistuse." #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "Teie arvutit saab seada vaikimisi kasutaja sisenemisele." #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "Flopi vorming" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "Tavalised printerid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Valige palun printer, kuhu trükitööd tuleks saata, või kirjutage " "sisendireale seadmenimi/failinimi" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Selle arvuti külge ühendatud skännerid on teistele kättesaadavad" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "Juurpartitsiooni algusesse" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "Alternatiivsed juhtprogrammid" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Märkige pakun ära kõik vajalikud valikud.\n" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "Cabo Verde" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "kas sel CPU-l on Cyrix 6x86 \"koomaviga\"" #: ../../standalone/printerdrake:1 #, c-format msgid "Loading printer configuration... Please wait" msgstr "Printeri seadistuse laadimine... Palun oodake" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "varased pentiumid olid vigased ning hangusid F00F baidikoodi dekodeerimisel" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "Guam" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Valige palun port, kuhu printer on ühendatud, või kirjutage sisendireale " "seadmenimi/failinimi" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "/Eelistused/Test" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "See tase muudab küll süsteemi lihtsalt kasutatavaks, kuid väga\n" "haavatavaks: ligipääsupiirangute puudumise tõttu ei peaks arvutit ühendama\n" "ei teiste arvutitega ega ka mitte Internetti." #: ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "Partitsiooni %s haakimine" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Kasutajanimi" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "Userdrake" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Millisele partitsioonile soovite paigaldada Linux4Win?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to missing %s" msgstr "puuduva %s tõttu" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "Testleheküljed" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "Loogilise ketta nimi " #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Taastatavate andmete loend:\n" "\n" #: ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "%s kontrollimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "TCP/Socket printeri seadistused" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Kaardi mälu (DMA)" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "Internetiühenduse katkestamine " #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Prantsusmaa" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "lehitse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "Paigaldatud tarkvara kontroll..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "Võrguprinteri nimi puudub!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Kas soovite trükkimist lubada printeritel Teie kohtvõrgus?\n" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Türgi" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch USB" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "Nuppude arv" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Vietnami \"numbrireaga\" QWERTY" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "Moodul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Lisaks sellele ei saa üle kanda järjekordi, mis on loodud käesoleva " "programmi või \"foomatic-configure\" poolt." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "Riistvara" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl- ja Alt-klahvid korraga" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "USA" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "Kasutaja umask" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "Vaikimisi OS?" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Šveitsi (Saksa asetus)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "Seadista kõik monitorid sõltumatult" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "Valige palun printer, mida soovite rakendada. Printeri seadistused peaksid " "toimima täiesti automaatselt. Kui printer tuvastati valesti või Te eelistate " "selle seadistusi korrigeerida, lülitage sisse \"Käsitsiseadistamine\"." #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "NTP server" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) üksikkasutaja tasemel" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "Laadi flopilt/Salvesta flopile" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "Sellel teemal ei ole veel ühtegi käivituslogo %s !" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "kena" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "Lõpuni %d sekundit" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Millisesse jadaporti on Teie modem ühendatud?" #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "Omadus" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "LAN seadistused" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Ghana" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "Kataloogi või mooduli nõudmine" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "Muud valikud" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "Seadistuse vaatamine" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "\"Koomaviga\"" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Nüüd peate valima partitsiooni(d), kuhu soovite Mandrake Linuxi paigaldada.\n" "Kui need on juba olemas kas GNU/Linuxi varasema paigalduse või mõne muu\n" "kettajagamisvahendi tegevuse tulemusena, võite kasutada olemasolevaid\n" "partitsioone. Vastasel juhul tuleb need luua.\n" "\n" "Partitsioon on loogiliselt eraldatud kõvaketta piirkond, mille suurust\n" "ei ole võimalik hiljem, töötavas süsteemis enam muuta. Samuti hävivad\n" "partitsiooni kustutamisel kõik sellel sisalduvad andmed.\n" "\n" "Et muuta seda tegevust lihtsamaks, on loodud nõustaja, mille soovitused\n" "on harilikult mõistlikud.\n" "\n" "Partitsioonide loomiseks valige esmalt kõvaketas. ``hda'' tähendab siin " "esimest\n" "IDE-ketast, ``hdb'' teist IDE-ketast, ``sda'' esimest SCSI-ketast ja nii " "edasi.\n" "\n" "Valitud ketta partitsioneerimiseks on järgmised võimalused:\n" "\n" " * \"%s\": kustutatakse kõik olemasolevad partitsioonid\n" "sellel kettal.\n" "\n" " * \"%s\": sel juhul tekitatakse Linuxile vajalikud\n" "partitsioonid vabale kettapinnale automaatselt.\n" "\n" "\"%s\": pakub mõned lisavõimalused:\n" " * \"%s\": salvestab partitsioonitabeli flopikettale.\n" "Sellest on kasu hilisemal partitsioonitabeli taastamisel, kui seda vaja\n" "peaks olema. Igal juhul on äärmiselt soovitav see samm ette võtta.\n" "\n" " * \"%s\": võimaldab taastada flopikettalt varem\n" "salvestatud partitsioonitabeli.\n" "\n" " * \"%s\": kui partitsioonitabel on vigastatud, võib\n" "proovida seda parandada. Palun ärge selle peale siiski liiga palju lootke.\n" "\n" " * \"%s\": kui soovite tühistada kõik enda tehtud muutused ja alustada algse " "partitsioonitabeliga.\n" "\n" " * \"%s\": selle võimaluse\n" "tühistamine sunnib kasutajaid käsitsi haakima ja lahutama eemaldatavaid\n" "andmekandjaid, st flopikettaid ja CD-ROMe.\n" "\n" " * \"%s\": kui soovite uue partitsioonitabeli loomisel samm-sammulist\n" "juhatust. See on soovitatav, kui Te ei ole varem midagi sellist teinud.\n" "\n" " * \"%s\": selle võimalusega saab tühistada kõik tehtud muudatused.\n" "\n" " * \"%s\": võimaldab partitsioonidega ette\n" "võtta lisaoperatsioone (tüüp, võtmed, vorming) ning pakub rohkem infot.\n" "\n" " * \"%s\": Partitsiooni suurust määrates saate seda täpselt paika\n" "panna klaviatuuril asuvaid nooleklahve kasutades.\n" "\n" "Märkus: igale võimalusele pääseb ligi ka klaviatuuri abil. Partitsioonidel\n" "saab liikuda klahvidega [Tab] ning üles-alla nooleklahvidega.\n" "\n" "Valitud partitsioonil on võimalikud järgmised tegevused:\n" "\n" " * Ctrl-c uue partitsiooni loomine (kui valitud on tühi partitsioon).\n" "\n" " * Ctrl-d partitsiooni kustutamine.\n" "\n" " * Ctrl-m haakepunkti seadmine.\n" "\n" "Lähemat infot erinevate failisüsteemitüüpide kohta leiab käsiraamatu\n" "peatükist ext2FS.\n" "\n" "Kui paigaldus toimub PPC-masinale, tuleks luua vähemalt 1MB suurune\n" "väike HFS ``bootstrap'' partitsioon, mida kasutab alglaadur yaboot. Kui Te\n" "aga teete selle partitsiooni natukene suuremaks (näiteks nii umbes 50MB),\n" "on see päris hea koht, kuhu hädaolukorraks paigutada tagavarakernel\n" "ja ramdisk-laadepildid." #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "Videokaart\n" "\n" " Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n" "paigaldatud videokaardi. Kui see ei õnnestu, saate nimekirjast valida\n" "kaardi, mis tegelikult on masinale paigaldatud.\n" "\n" " Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n" "kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n" "kõige enam vastab." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Pakettide paigaldamisel tekkis viga:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "Lexmark inkjeti seadistused" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Tagasi" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "Kirjuta partitsioonitabel" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Soome" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Makedoonia" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Kasutaja kaupa jagamise lubamine rakendab gruppi \"fileshare\". \n" "Sellesse gruppi kasutajate lisamiseks saab tarvitada userdraket." #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Sloveenia" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Autoriseeritakse:\n" "\n" "- kõik teenused, mida kontrollib tcp_wrappers (vt hosts.deny (5)), kui on " "\"KÕIK\",\n" "\n" "- ainult kohalikud, kui on \"KOHALIK\",\n" "\n" "- mitte ühtegi teenust, kui on \"MITTE KEEGI\".\n" "\n" "Vajalike teenuste autoriseerimiseks kasutage faili /etc/hosts.allow (vt " "hosts.allow(5))." #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "Liibüa" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Häälestan skriptid, paigaldan tarkvara, käivitan serverid..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "Printer paralleelpordis #%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Kirjutamine CD-le" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Tabel" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Ei oska seadet %s vormindada tüüpi %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "Mudel" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "USB printer #%s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "Serveri peatamine" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" "\n" "Valige teema LiLo-le\n" "ja käivituslogole,\n" "neid võib valida\n" "ka eraldi" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "Modem" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "Kasuta automaattuvastust" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM annab võimaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n" "lõikamisele/kleepimisele saab kasutada ka menüüsüsteeme." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "Käivitub laadimisel" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" "Ühinege MandrakeSofti tugimeeskondadega ning Linuxi kogukonnaga Internetis, " "et jagada oma kogemusi ning aidata ka teistel saada tunnustatud ekspertideks " "tehnilise toe veebileheküljel:" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "Salasõna ei aegu" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "Süsteemi turvalisuse kohandamiseks saab seadistada\n" "järgmisi parameetreid. Seletuste saamiseks vaadake abivihjeid.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Otsi automaatselt kõiki kättesaadavaid võrguprintereid" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Ida-Timor" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "lindiseadmele" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Salvestamine lindile seadmel: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "Kasutajatunnus" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "Omanikuta failidest teatamine" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "Kustuta profiil..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "Foomaticu paigaldamine..." #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Palun väljuge ja vajutage siis Ctrl-Alt-BackSpace" #: ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "tuvastati" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Võrk tuleb uuesti käivitada. Kas soovite seda teha?" #: ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "Pakett:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "/etc/sysconfig/bootsplash kirjutamine ebaõnnestus." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "TURVAHOIATUS!" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "Ei taha automaatselt siseneda" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "Windowsi ümberkolimise vahend" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "Kõik keeled" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "%s eemaldamine" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s not found...\n" msgstr "%s ei leitud...\n" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "Testime Teie ühendust..." #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "Puhvri suurus" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Salasõnad on nüüd kasutusel, kuid võrku ühendamine ei ole siiski soovitav." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Algsektor: " #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongo (Brazzaville)" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "Lugeda" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Pakett %s tuleks kindlasti paigaldada. Kas soovite seda teha?" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "Seišellid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake võrdles printeri automaattuvastusel leitud mudelinime oma " "printeri andmebaasis leiduvate mudelitega, et leida sobiv vaste. Valik võib " "olla ekslik, eriti juhul, kui Teie printerit ei peaks mingil põhjusel " "andmebaasis leiduma. Seepärast kontrollige, kas valik on õige ning vajutage " "\"Mudel õige\", kui see on nii, või \"Mudeli valik käsitsi\", kui midagi on " "valesti, mille järel saate järgmisel sammul valida printeri mudeli " "iseseisvalt.\n" "\n" "Teie printeri puhul leidis Printerdrake:\n" "\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "Halb parool %s puhul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Üks tundmatu printer on Teie süsteemi otse ühendatud" #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "Parempoolne Ctrl-klahv" #: ../../network/tools.pm:1 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Pange FAT-vormingus flopi seadmesse %s, nii et %s oleks juurkataloogis, ning " "vajutage %s" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Sambia" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "Turvaadministraator (kasutajatunnus või e-posti aadress)" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "Vabandust, me toetame ainult 2.4 kerneleid." #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "Rumeenia (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "Tegutsen... palun oodake." #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "Egiptus" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Tšehhi" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "Helikaart" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "Fontide importimine" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Teil on üks suur FAT partitsioon\n" "(tavaliselt kasutab sellist MS DOS/Windows)\n" "Soovitame Teil esmalt selle suurust muuta\n" "(klõpsake ja siis valige \"Muuda\")" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "Ajutiste failide kustutamine" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Õnnitleme, võrk ja internetiühendus on seadistatud.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Muuda partitsiooni tüüpi" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" "Kuvatihedus\n" "\n" " Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja värvisügavuse.\n" "Kui Te paigalduse järel leiate, et siin valitu siiski ei kõlba, saate seda\n" "hiljem muuta. Valitud seadistust näidatakse monitoril." #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "Võrguparameetrid" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "Msec igatunnise turvakontrolli lubamine" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Teema näitamine\n" "konsoolis" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "(masinal %s)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM seeria" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Teek, mis kaitseb puhvri ületäite ja vormingustringide rünnakute vastu." #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "keskmine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "Uus printeri nimi" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "Võimaldab tavakasutajal failisüsteemi haakida. Haakimist\n" "teostava kasutaja nimi kirjutatakse mtab-i, nii et ta saab ka\n" "failisüsteemi lahutada. See võti tähendab võtmeid noexec,\n" "nosuid ja nodev (kui neid ei tühista järgnevad võtmed, nagu\n" "näiteks võtmerida user,exec,dev,suid )." #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatoriaal-Guinea" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "süsteemseid faile" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "Loo varukoopia" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Faili trükkimiseks käsurealt (terminaliaken) kasutage käsku \"%s \" " "või \"%s \".\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Praegu ei ole ühtegi teist võimalust" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "Rumeenia (QWERTZ)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "Salvesta seadistus" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Routed on RIP deemon, mis vahetab selle protokolli alusel\n" "marsruutimisinfot. Kui Teil on RIP kasutusel, on vajalik ka routed." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Kiribati" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech (jadaport, vana C7 tüüpi) ratta emuleerimisega" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "Muud (drakbackupi-välised) võtmed on juba paigas" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "X (ehk X Window System) kujutab endast GNU/Linuxi graafilise " "kasutajaliidese\n" "tuuma ja südant, millele toetuvad kõik Mandrake Linuxiga kaasas käivad\n" "graafilised töökeskkonnad (KDE, GNOME, AfterStep, WindowMaker jne).\n" "\n" "Siin näidatakse Teile tervet nimekirja parameetreid, mida saab muuta,\n" "et graafiline kasutajaliides oleks just Teile meelepärane: Videokaart\n" "\n" " Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n" "paigaldatud videokaardi. Kui see ei õnnestu, saate nimekirjast valida\n" "kaardi, mis tegelikult on masinale paigaldatud.\n" "\n" " Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n" "kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n" "kõige enam vastab.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n" "ühendatud monitori. Kui see ei peaks siiski õnnestuma, saate siin toodud\n" "nimekirjast valida monitori, mis Teil tegelikult on.\n" "\n" "\n" "\n" "Kuvatihedus\n" "\n" " Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja värvisügavuse.\n" "Kui Te paigalduse järel leiate, et siin valitu siiski ei kõlba, saate seda\n" "hiljem muuta. Valitud seadistust näidatakse monitoril.\n" "\n" "\n" "\n" "Test\n" "\n" " süsteem püüab avada graafilist akent soovitud kuvatihedusega. Kui näete\n" "testi ajal sõnumit ja vastate \"%s\", suundub DrakX järgmise sammu juurde.\n" "Kui Te sõnumit ei näe, tähendab see, et miski automaatselt tuvastatud\n" "seadistuses oli mäda ja test lõpeb automaatselt 12 sekundi pärast, tuues\n" "Teid menüüsse tagasi. Seal saate muuta seadistusi, kuni Teil õnnestub\n" "leida see, mis tagab korrektse ja meelepärase graaafilise kasutajaliidese.\n" "\n" "\n" "\n" "Valikud\n" "\n" " Siin saab määrata, kas soovite, et masin käivitaks alglaadimise ajal\n" "automaatselt graafilise kasutajaliidese. Ilmselt on Teie vastus \"%s\",\n" "kui soovite, et masin toimiks serverina, või kui Teid ei kippunud\n" "seadistamise ajal edu saatma." #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "Lehitse" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "CD-ROM" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Kas soovite oma Internetiühendust proovida?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Belgia" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "Kas Teil on ISA helikaart?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Ühtegi võrgukaarti ei õnnestunud tuvastada\n" "Seega ei saa ka sellist ühendust seadistada." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "Windows" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Hetktõmmiseid ei saa teha enne partitsioneerimist" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "Masinanimi" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "/Fail/Salvesta _Kui" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "Juurdepääsu saamiseks CUPS serverite printeritele Teie kohtvõrgus tuleb vaid " "ära märkida võimalus \"Otsi automaatselt kõiki kättesaadavaid võrguprintereid" "\". CUPS serverid annavad Teie masinale automaatselt teada oma printeritest. " "Kõik Teie masinale parajasti kättesaadavad printerid on näidatud " "Printerdrake peaakna sektsioonis \"Võrguprinterid\". Kui CUPS server(id) ei " "asu kohtvõrgus, tuleb nende kohta info hankimiseks sisestada IP aadress(id) " "ning võimaluse/vajaduse korral ka pordi number." #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s puudub skännerite andmebaasis, kas seadistada see käsitsi?" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Ooteaeg alglaadimisel" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Piira käsurea suvandeid" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "Ida-Euroopa" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Kasuta vaba ruumi" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "dhcp" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "Meilihoiatus" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Internetiseadistused" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Usbekistan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "Tuvastati %s" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "/_Printerite automaattuvastus" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "Lõpeta" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "Näita automaatselt valitud pakette" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Togo" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "CPU lipud kerneli teatel" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Midagi läks valesti! - Kas mkisofs on ikka paigaldatud?" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 MB" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Palun proovige veel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "Mudel õige" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "FATi suuruse muutmine ebaõnnestus: %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Valik paketthaaval" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "See partitsioon ei ole muudetav" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "Asukoht" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "USA (kaabel-hrc)" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "Guatemala" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "Kirjendatud FS" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Võrgukaardi mitte-eelisoleku kontroll" #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "See masin" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS kettatähis: %s (arvatavasti)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Bahrein" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Valige failid või kataloogid ja klõpsake 'Olgu'" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "scsi moodulite vahelejätt" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "CPU perekond (nt 6, kui on i686)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Võrguühendus on juba seadistatud, sest paigaldatakse ju võrgust.\n" "Kui soovite neid seadistusi säilitada, valige 'Olgu', muidu katkestage ja " "saate seadistada uuesti.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "Igapäevase turvakontrolli lubamine" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Klaviatuuriasetus: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Siin saate valida, millised selle arvuti külge kinnitatud printerid peaksid " "olema kättesaadavad ka teistele kohtvõrgu arvutitele ja millistele nende " "hulgast." #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "Malta (USA)" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "Alglaadimisflopi loomine edukalt lõpetatud \n" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Haagib ja lahutab kõiki võrgufailisüsteeme\n" "(nii NFS, SMB kui ka NCP)." #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "Nõustaja käivitamine" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "TV-kaart" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "Ekspert > Tavakasutaja" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "Suurus" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "GRUB" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "Gröönimaa" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "Neljapäev" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Lindi nimi pole korrektne. Lint kannab nime %s." #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Internetiühenduse jagamine on juba seadistatud\n" "ja see on ka praegu aktiivne.\n" "\n" "Mida soovite ette võtta?" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "Kustuta kõik võrgu alglaadefailid" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" "See dialoog aitab täpselt häälestada alglaadimist:\n" "\n" " * \"%s\": siin on kolm valikut:\n" "\n" " * \"%s\": kui eelistate grubi (tekstimenüü).\n" "\n" " * \"%s\": kui eelistate LiLot teksti kujul.\n" "\n" " * \"%s\": kui eelistate LiLot graafilisel kujul.\n" "\n" " * \"%s\": enamasti ei ole sügavat mõtet muuta vaikimisi valikut\n" "(\"%s\"), aga kui Te väga soovite, võib alglaaduri paigaldada ka teisele\n" "kõvakettale (\"%s\") või isegi flopikettale (\"%s\").\n" "\n" " * \"%s\": arvutile alglaadimist tehes pakutakse Teile võimalust väikeseks\n" "pausiks, mille jooksul saab alglaadimismenüüst valida mõne muu kirje kui\n" "vaikimisi pakutu.\n" "\n" "!! Pange tähele, et kui Te otsustate alglaadurit mitte paigaldada (klõpsates " "siin\n" "nupule \"%s\"), peate kuidagi leidma mooduse, kuidas oma Mandrake\n" "Linux siiski tööle saada! Ja päris hea oleks, kui Te kindlalt teaksite, mida " "teete,\n" "enne kui mõnda siin pakutud võimalust muuta. !!\n" "\n" "Klõpsuga nupul \"%s\" saab näha veel mitmeid valikuid, mis on mõeldud\n" "kogenud kasutajatele." #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "Kui on lubatud, saadab meiliraporti sellele aadressile, muidu " "administraatorile." #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Millist XFree seadistust soovite kasutada?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "Veel..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" "Kasutatakse samasugust süntaksit, nagu tarvitab käsurearakendus 'cdrecord'. " "'cdrecord -scanbus' näitab ka seadme numbrit." #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Sellel turvatasemel võib süsteemi kasutada Internetis ka serverina.\n" "Turvalisus on nüüd piisavalt kõrge, et töötades serverina võib masin\n" "vastu võtta ka palju kliente. Märkus: kui Teie masin kasutab Internetti\n" "ainult kliendina, võiks valida madalama taseme." #: ../../standalone/printerdrake:1 #, c-format msgid "Server Name" msgstr "Serveri nimi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Salasõna" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "%s näitamine ei õnnestu.\n" "Sellist tüüpi abikirjet ei ole.\n" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Otsustasite paigaldada alglaaduri partitsioonile.\n" "See eeldab, et Teil on juba alglaadur kõvakettal, millelt Te alglaadimise " "sooritate (nt System Commander).\n" "\n" "Milliselt kettalt Te alglaadimise teete?" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "HOIATUS!\n" "\n" "DrakX hakkab Teie Windowsi partitsiooni suurust muutma.\n" "Olge ettevaatlik: see operatsioon võib olla ohtlik Teie failidele.\n" "Palun käivitage enne seda, kui asute paigalduse juurde,\n" "Windowsis käsurealt \"chkdsk c:\" (arvestage, et graafilisest\n" "rakendusest \"scandisk\" ei piisa, seepärast kasutage\n" "kindlasti käsurealt käivitatavat \"chkdsk\"!).\n" "Lisaks sellele defragmenteerige ketas ja alles siis asuge\n" "taas paigalduse kallale. Kasulik oleks juba Windowsis\n" "ka oma andmetest tagavarakoopia teha.\n" "Kui olete oma otsuses kindel, vajutage \"Olgu\"." #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "Tadžiki" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Teil on võimalus kopeerida printeri seadistused, mida määrasite spuulerile %" "s, Teie praegusele spuulerile %s. Üle kantakse kõik seadistused (printeri " "nimi, kirjeldus, asukoht, ühendusviis, vaikevalikud), aga mitte tööd.\n" "Kõiki järjekordi ei saa üle kanda järgmistel põhjustel:\n" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "Fontide loend" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Alglaaduri võimaldamiseks tuleb Teil muuta oma Open Firmware\n" " alglaadimisseadet. Hoidke taaskäivituse ajal all klahve\n" " Command-Option-O-F ja kirjutage:\n" " setenv boot-device %s,\\\\:tbxi\n" " Seejärel kirjutage: shut-down\n" "Järgmisel käivitusel peaksite nägema alglaaduri käsurida." #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "Paistab, et Teil on OldWorld-i või hoopis tundmatu\n" " masin, igatahes alglaadur yaboot siin ei tööta.\n" "Paigaldus küll jätkub, aga masina käivitamiseks\n" " tuleb Teil kasutada BootX-i või mingit muud nippi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Valige fail" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" "Valige palun võrk või masin, mille jaoks soovite siinseid printereid välja " "jagada." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Neid käske saab kasutada ka paljude rakenduste trükkimisdialoogi väljal " "\"Trükkimiskäsk\", kuid seal pole vaja kirjutada failinime, sest selle annab " "rakendus ise.\n" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Jaapan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "Trükkimisvalikute loend" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "Muudatus on tehtud, aga selle rakendamiseks tuleb välja logida" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "Maa / Piirkond" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "Serverite otsing" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "NCP järjekorra nimi puudub!" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Hoiatus, avastati veel üks Internetiühendus, mis võib-olla kasutab Teie võrku" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "CD pealdisega \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "CD-RW andmekandja" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Salvestab ja taastab juhuarvude genereerimiseks vajaliku\n" "süsteemse entroopiasalve." #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "Muutke oma masin usaldust väärivaks serveriks" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Tühja salasõna kontroll /etc/shadow-s" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr " (juhtprogramm %s)" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "Vajaduse korral" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback fail(id):\n" " %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Ei tea" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP masinal \"%s\", port %s" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Püüate hakata seadistama automaatpaigalduse flopit. See on natuke ohtlik " "tegevus, mida tuleb teha väga ettevaatlikult.\n" "\n" "Seda võimalust kasutades saate korrata arvutile tehtud paigaldust ning mõne " "sammu puhul ka ise kaasa rääkida, et üksikuid väärtusi muuta.\n" "\n" "Täieliku turvalisuse huvides ei tuleks partitsioneerimist ja vormindamist " "kunagi lubada automaatselt sooritada, seda hoolimata sellest, millise " "võimaluse kasuks olete paigalduse algul otsustanud.\n" "\n" "Kas soovite nüüd jätkata?" #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "Telugu" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Teie helikaart kasutab praegu %s\"%s\" juhtprogrammi (selle kaardi " "vaikedraiver on \"%s\")" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "Eemaldamisjärgsed seadistused" #: ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "Internetiühenduse loomine " #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr " (" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "Cpuid tase" #: ../../printer/main.pm:1 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Novelli serveril \"%s\", printer \"%s\"" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "Mongoli (kirillitsa)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "Lisa moodul" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "Kustutatav profiil:" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "Kohalikud andmed" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "Hoiatus : IP aadress %s on tavaliselt reserveeritud !" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "siinihiir" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - Etherboot-suutlike laadepiltide loomine:\n" " \tKerneli alglaadimiseks etherboodi vahendusel tuleb luua eriline " "kernel/initrd laadepilt.\n" " \tSuure osa tööst teeb ära mkinitrd-net ning drakTermServ on vaid " "graafiline\n" " \tkasutajaliides, aitamaks neid laadepilte hallata ja/või kohandada. " "Faili /etc/dhcpd.conf.etherboot-pcimap.include loomiseks, \n" " \tmis kaasatakse faili dhcpd.conf, tuleb luua etherboot-laadepildid " "vähemalt ühele kernelile." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Kasutajatunnus" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "FDIV viga" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "drakfirewalli seadistaja\n" "\n" "Kontrollige enne jätkamist, et olete seadistanud pääsu võrku/Internetti\n" "drakconnecti abil." #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Üldlevi icmp echo lubamine" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Uruguay" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "Benin" #: ../../printer/main.pm:1 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windowsi serveril \"%s\", jagatud printer \"%s\"" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "Asukoha valik" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "Masina nimi/IP aadress:" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Custom & system settings" msgstr "Isetehtud ja süsteemsed seadistused" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Teie kõvakettal juhtub imelikke asju. \n" "Andmete pidevuse kontroll ebaõnnestus. \n" "See tähendab, et kettale kirjutamisel tekivad jamad." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "Printeri masinanimi või IP puudub!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "Märkige palun kõik kasutajad, keda soovite varukoopiasse kaasata." #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "See %s skänner tuleb seadistada printerdrake abil.\n" "Printerdrake saab käivitada Mandrake juhtimiskeskuse riistvara sektsioonist." #: ../../../move/move.pm:1 #, c-format msgid "Key isn't writable" msgstr "Mälupulk ei ole kirjutatav!" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "Jaapan (kaabel)" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "Käivitustestid" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Jätka" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "Taastamise kohandamine" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "Laupäev" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "\"%s\": kui süsteemis leiti helikaart, näidatakse seda siin.\n" "Kui märkate, et näidatav helikaart ei ole mitte see, mis süsteemis\n" "Teie teada tegelikult on, klõpsake nuppu ja valige uus juhtprogramm." #: ../../security/help.pm:1 #, c-format msgid "Set the root umask." msgstr "Administraatori umask-i määramine" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "Viga faili %s lugemisel" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "Skriptipõhine" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "PLL:" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Teil peab olema FAT-partitsioon haagitud asukohas /boot/efi" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr " masinal " #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL peab algama kas http:// või https://" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Siin saab määrata konkreetse URI printerile ligipääsuks. URI peab järgima " "CUPSi või Foomaticu spetsifikatsiooni. Pange tähele, et mitte kõik spuulerid " "ei toeta kõiki URI tüüpe." #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Muu OS (SunOS...)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "Paigaldus/Uuendamine" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d paketti" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Costa Rica" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Varundamis- ja taastamisrakendus\n" "\n" "--default : salvestab vaikekataloogid.\n" "--debug : näitab kõiki silumisteateid.\n" "--show-conf : varundatavate failide või kataloogide loend.\n" "--config-info : selgitab seadetefaili võtmeid (X-i " "mittekasutajaile).\n" "--daemon : kasutab deemoni seadistusi.\n" "--help : näitab käesolevat abiteadet.\n" "--version : näitab versiooni nime.\n" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "Nõutav on domeeni autentimine" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "Serveritel kasutatakse libsafe'i" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "Islandi" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Kasutamine: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version]" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Drakbackupi suurim\n" " lubatud suurus (Mb)" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Ringühendus %s\n" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "LiLo/grub resiim" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Martinique" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "Kõvaketas / NFS" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "Vanad kasutajate failid:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "Varukoopiate otsimine" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "number" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Rootsi" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Millist %s juhtprogrammi peaksime proovima?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Saate hoiatuse, kui üks valitud teenustest enam ei tööta" #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "Nädalapäev" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Failisüsteemi tüübid: " #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Põhja-Mariaani saared" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", mitme funktsiooniga seade HP JetDirectil" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "ei soovi" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "Loodava profiili nimi (uus profiil luuakse praeguse koopiana) :" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "Flopi" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "Ghostcsripti määratlused" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "Alglaadur" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Kõigi teenuste aktsepteerimine, mida kontrollib tcp_wrappers" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Liiguta" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "Eelistatav alglaadur" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "SMB serveri nimi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "Nimeserverid:" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "Minutit" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Hoiatus\n" "\n" "Palun lugege hoolega järgnevat teksti. Kui Te ei ole nõus kõigi " "alljärgnevate\n" "väidetega, on paigaldamine järgmise CD pealt keelatud. Vajutage 'Keeldun',\n" "et jätkata paigaldamist ilma selle CD-ta.\n" "\n" "\n" "Mõned komponendid järgmisel CD-l ei ole kaitstud Üldise Avaliku Litsentsi\n" "või muude sarnaste litsentsidega, vaid kasutavad omaenda erilisi\n" "litsentsivorme. Seepärast lugege sellised litsentsid hoolega läbi ja\n" "tutvuge nende tingimustega, enne kui hakata neid komponente kasutama\n" "või levitama.\n" "Üldiselt kipuvad sellised litsentsid keelama komponendi kopeerimise,\n" "duplitseerimise (välja arvatud varundamise sihil), edastamise, muutmise\n" "või edasiarendamise.\n" "Litsentsilepingu tingimuste rikkumine lõpetab otsekohe kõik Teie õigused,\n" "mis kaasnesid litsentsiga nõustumisel. Kui mõni konkreetne litsentsi\n" "punkt Teile selliseid õigusi ei anna, ei või Te enamasti paigaldada " "rakendust\n" "enam kui ühte süsteemi ega muuta seda võrgutöö huvides. Kui Te ei ole\n" "tingimustes kindel, võtke ühendust komponendi levitaja või arendajaga.\n" "Üldjuhul on selliste komponentide, sealhulgas dokumentatsiooni, edastamine\n" "kolmandale poolele või kopeerimine keelatud.\n" "\n" "\n" "Kõigi järgmisel CD-l paiknevate komponentide õigused kuuluvad vastavalt\n" "nende autorile ning on kaitstud tarkvara puhul kehtivate intellektuaalse\n" "omandi ja autoriõiguse seadustega.\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Expert mode" msgstr "/_Ekspertresiim" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Eemalda StarOffice/OpenOffice.org/GIMP-ilt" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linuxi virtuaalserver, mis on mõeldud veatult töötavaks ja igati\n" "kättesaadavaks serveriks." #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Mikroneesia" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 miljardit värvi (32 bitti)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "Litsents" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "Võtmete genereerimine võtab mõne hetke aega" #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "Siin saate seadistada oma arvuti turvataseme ja määrata " "turvaadministraatori.\n" "\n" "\n" "Turvaadministraator on isik, kes saab turvahoiatusi, kui vastav võimalus on\n" "sisse lülitatud. Siin võib anda e-posti aadressi või nime.\n" "\n" "\n" "Turvataseme menüü lubab valida kuue eelnevalt määratud turvataseme\n" "vahel, mida pakub msec. Need ulatuvad nigelast turvalisusest ja hõlpsast\n" "kasutamisest paranoilise turvalisuseni, mis sobib tundlikele " "serverirakendustele:\n" "\n" "\n" "Vähene: See ei ole üldse turvaline,\n" "kuid muudab arvuti kasutamise väga hõlpsaks. Seda tuleks kasutada ainult\n" "masinatel, mis ei ole võrku ühendatud ja millele ei pääse hõlpsasti ligi.\n" "\n" "\n" "Standardne: see on tavaline " "turvatase,\n" "mida võib soovitada arvutile, mis on Internetti ühendatud kliendina.\n" "\n" "\n" "Kõrge: On juba mõningaid piiranguid,\n" "igal ööl sooritatakse märksa rohkem automaatseid kontrollimisi.\n" "\n" "\n" "Väga kõrge: Turvalisus on piisav, et\n" "süsteemi saaks kasutada serverina, mis võib vastu võtta ühendusi paljudelt\n" "klientidelt. Kui Teie masin on Internetis vaid kui klient, oleks mõttekam\n" "valida madalam tase.\n" "\n" "\n" "Paranoiline: See sarnaneb eelmisele\n" "tasemele, ainult et süsteem on täiesti suletud ja turvaseadistused\n" "maksimumi peale keeratud." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Printeri automaattuvastus (kohalikud, TCP/Socketi ja SMB printerid)" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (pppoa vahendusel) usb" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Tekkis viga: failisüsteemi loomiseks ei leitud ühtki seadet. Palun " "kontrollige oma riistvara." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "Trükkimissüsteem käivitatakse alglaadimisel" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Kas soovite luua ühenduse juba alglaadimisel?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "Protsessori ID" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "Heliprobleemide lahendamine" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Poola (QWERTY)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Add Printer" msgstr "/Lis_a printer" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Drakbackupi tegevus CD vahendusel:\n" "\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Te püüate praegu paigaldada trükkimissüsteemi %s süsteemi, mis töötab " "turvatasemel '%s'.\n" "\n" "See trükkimissüsteem käivitab deemoni (taustal töötava protsessina), mis " "võtab vastu ja käsitleb trükkimistöid. Deemonile pääseb võrgu kaudu ligi ka " "kaugmasinatelt, mistõttu see kujutab endast võimaliku rünnaku objekti. " "Seetõttu käivitatakse selle turvataseme puhul vaikimisi ainult mõned valitud " "deemonid.\n" "\n" "Kas soovite tõesti seadistada trükkimist sellel masinal?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "Masin \"%s\", port %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Seda partitsiooni ei saa loopback-ina kasutada" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Fail on juba olemas. Kas kasutada seda?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "saadud: " #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "Parempoolne Alt-klahv" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "selle helikaardi alternatiivsete juhtprogrammide loend" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Vaikelüüs" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Tonga" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Tuneesia" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "Skänneri jagamine" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "Profiil: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Klõps seadmel vasakul asuvas puus näitab siin selle kohta käivat infot." #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "Automaatse sisselogimise lubamine/keelamine" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "XawTV ei ole paigaldatud!" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Kriitilised failid jäetakse välja (passwd, group, fstab)" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "vana staatiline seadmenimi, mis oli kasutusel paketis dev" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "Ipv4 veidrate pakettide logimise lubamine" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Selline pealdis on juba kasutusel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printeri seadistamise nõustaja\n" "\n" "Nõustaja aitab Teil paigaldada printeri(d), mis on ühendatud selle arvutiga " "või otse võrku.\n" "\n" "Kui Teil on printer(eid), mis on ühendatud selle masinaga, ühendage palun " "see/need arvutiga ja lülitage sisse, et seda/neid saaks automaatselt " "tuvastada. Ka võrguprinter(id) peavad olema ühendatud ja sisse lülitatud.\n" "\n" "Pange tähele, et võrguprinterite automaattuvastus võtab rohkem aega kui " "ainult selle masinaga ühendatud printeri(te) automaatne tuvastamine. Nii et " "kui te seda ei vaja, lülitage võrguprinterite automaattuvastus välja.\n" "\n" "Kui olete valmis, vajutage \"Järgmine\", või \"Katkesta\", kui Te ei soovi " "praegu printeri(te) seadistamisega tegelda." #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "Kreeka (polütoonne))" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Partitsiooni %s vormindamisel hävivad sellel kõik andmed" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "Ühenduse kestvus: " #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Palun sisestage paigaldus-CD lugejasse ja vajutage .\n" "Kui teil säherdust ei ole, vajutage , et kiiruuendust vältida." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "Käivitamiseks kasutatakse grupi id-d" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Valige vaikimisi kasutaja:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Gabon" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Kui võrgus on CUPS server, siis ei ole Teil vaja siin printereid seadistada, " "need leitakse automaatselt." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrake Linux toetab paljusid keeli. Valige keeled, mida\n" "soovite paigaldada. Kui paigaldus on lõpetatud ja Te teete\n" "süsteemile taaskäivituse, saate neid kasutada." #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "Kataloog (või moodul), kuhu sellel masinal varukoopia salvestada" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "Domeen" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Kui vaja, täpsustage RAM suurust (leitud %d MB)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" "LiLo ja grub on GNU/Linuxi alglaadurid. Tavaliselt käib siin kõik täiesti\n" "automaatselt. DrakX uurib ketta alglaadimissektorit ja talitab vastavalt\n" "sellele, mida ta sealt leiab:\n" "\n" " * kui leitakse Windowsi alglaadimissektor, asendatatakse see grub/LiLo\n" "alglaadimissektoriga. Nii võite laadida kas GNU/Linuxi või mõne muu OS-i.\n" "\n" " * kui leitakse grub-i või LiLo alglaadimissektor, asendatakse see uuega.\n" "\n" "Kui DrakX ei suuda asjast aru saada, küsitakse Teie käest, kuhu alglaadur\n" "paigutada." #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "DNS 2 (võib jätta tühjaks)" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Alglaadimisseade" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Millist partitsiooni soovite muuta?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Ühendriikide hajasaared" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "Djibouti" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "Vahend logide jälgimiseks" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "leiti pordis %s" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "LPD" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Graafikakaart: %s\n" #: ../../standalone/printerdrake:1 #, c-format msgid "/Set as _Default" msgstr "/Määra _vaikeprinteriks" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "Icmp echo lubamine" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC seeria ratta emuleerimisega" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Sellel platvormil ei saa laiendatud partitsiooni luua" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "Käivituslogo valik" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "ISDN seadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "kõrge" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "Internetiühenduse jagamine" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "Faili valimine" #: ../../standalone/drakbug:1 #, c-format msgid "Summary: " msgstr "Kokkuvõte: " #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Hoiatus! Leiti olemasolevad tulemüüri seadistused. Tõenäoliselt peaksite " "need hiljem üle vaatama." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Trükkimine/fotokaartide ligipääs seadmel \"%s\"" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "Igapäevane turvakontroll" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Kas soovite trükkimist lubada ülalmainitud printeritel või printeritel Teie " "kohtvõrgus?\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "Printeri vaikeseadistused" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Tavaline PS2 rattaga hiir" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "WP lipp CR0 registris kehtestab kirjutuskaitse mälulehekülje tasemel, " "võimaldades nii protsessoril takistada kerneli kontrollimatut ligipääsu " "kasutajamälule (kannab ka nimetust veavalvur)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Vana printeri \"%s\" eemaldamine..." #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "Valige seade !" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "Valitud serveri eemaldamine" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (dhcp vahendusel) usb" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Prantsuse Lõunaalad" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "protsessori tootja nimi" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - %s haldamine:\n" " \t\tEt kasutajad saaksid kettata tööjaamalt süsteemi logida, peab " "nende kirje\n" " \t\tfailis /etc/shadow leiduma ka failis %s.\n" " \t\tdrakTermServ aitab süsteemi kasutajaid faili lisada või sealt " "eemaldada." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Selle partitsiooni andmetest võiks olla varukoopia" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Paketi %s paigaldamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "Kontrollin ja häälestan HPOJ.." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Et saada rohkem partitsioone, kustutage palun üks, et luua laiendatud " "partitsioon" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Teie printer on seadistatud automaatselt ja võimaldab Teil oma arvutilt ligi " "pääseda fotokaardiketastele. Fotokaartidele pääseb ligi graafilise rakenduse " "\"MtoolsFM\" (menüüs: \"Rakendused\" -> \"Failivahendid\" -> \"Failihaldur " "MTools\") või käsureavahendi \"mtools\" abil (andke käsureal käsk \"man " "mtools\", et saada selle kohta rohkem infot). Kaartide failisüsteemi leiate " "kettal \"p:\" või mõnel sellele järgneva tähega kettal, kui Teil juhtub " "olema enam kui üks HP fotokaardiseadmega printer. Rakenduses \"MtoolsFM\" " "võite liikuda ketaste vahel faililoendi ülal paremas nurgas asuval väljal " "leiduvaid tähti vahetades." #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Pakettide valik" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "Kettal %s hävivad KÕIK partitsioonid ja andmed" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Teie kõvakettal ei ole piisavalt vaba ruumi paigalduseks või uuenduseks (%d " "> %d)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Iga printer vajab nime (näiteks \"printer\"). Kirjelduse ja asukoha välja ei " "ole vaja tingimata täita, need on vaid kommentaarid kasutajatele." #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" "\"%s\": klõps nupul \"%s\" avab printeri seadistamise\n" "nõustaja. Uurige lähemalt käivitusjuhiste vastavast peatükist, kuidas\n" "uut printerit häälestada. Siin näidatav sarnaneb sellele, mida võisite\n" "näha paigalduse ajal." #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Bhutan" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Võrguliides" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "Internetiühenduse katkestamine ebaõnnestus." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "Printeri andmete lugemine..." #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "Korea" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "Ei ole ühendatud" #: ../../standalone/net_monitor:1 #, c-format msgid "No internet connection configured" msgstr "Internetiühendus pole seadistatud" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Kreeka" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts ja Nevis" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Tavaline 3 nupuga hiir ratta emuleerimisega" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "OF laadimine lubatud?" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "JFS ei ole kasutatav alla 16MB partitsioonidel" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "RW andmekandja puhastamine (esimene seanss)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Ekraaniuuendussagedus: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Haakepunkt" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Juhtus viga:\n" "%s\n" "Proovige mõnda parameetrit muuta" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "TCP/IP masinal \"%s\", port %s" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "Kasutaja :" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "Süsteemi taastamine" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Nende masinate jaoks on selle arvuti küljes olevad skännerid kättesaadavaks " "tehtud:" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "DHCP vahemiku lõpu ip" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "Veel üks" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Colombia" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "'%s' praegused seadistused:\n" "\n" "Võrk: %s\n" "IP aadress: %s\n" "IP omistamine: %s\n" "Juhtprogramm: %s" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "Réunion" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Üksikasjad" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Turvakaalutlusel katkestan nüüd ühenduse." #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "Sünkroniseerimisvahend" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "Süsteemi kontrollimine..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "Trüki" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Sisestage lint nimega %s\n" " lindiseadmesse %s" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Mongoolia" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Haagitud\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS" msgstr "CUPSi seadistamine" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "Graafiline kasutajaliides" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "Kasutajate taastamine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "%s krüptovõti" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to recover your system?" msgstr "Kas soovite süsteemi taastada?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper haldab RPC ühendusi, mida kasutavad NFS ja NIS.\n" "Neil serveritel on see hädavajalik." #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "Tuvastatud riistvara" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Mauritius" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "Myanmari (Birma)" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "Vormindan saaleala %s" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Sobivat FAT-partitsiooni loopback-ina kasutamiseks ei leitud (ei ole " "piisavalt ruumi)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Armeenia (vanem)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Printer nimega \"%s\" on juba %s olemas. \n" "Vajutage \"Kanna üle\" selle ülekirjutamiseks.\n" "Te võite küll ka sisestada uue nime või selle printeri vahele jätta." #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "Leidke oma probleemidele lahendus MandrakeSofti internetitoe abil" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr ", masin \"%s\", port %s" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "Monaco" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Ketta jagamine ebaõnnestus: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s vormindamine seadmel %s ebaõnnestus" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "Kanada (kaabel)" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "Flopi loomine lõpetatud" #: ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "Uuendus" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "Tööjaam" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Paketi %s paigaldamine\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Kõrgõzstan" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "Mitme funktsiooniga seade USB-l" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "Teie süsteemist ei suudetud leida ühtki USB mälupulka.\n" "Kui ühendate USB mälupulga nüüd, võib Mandrake Move\n" "salvestada läbipaistvalt Teie kodukataloogi andmed ning\n" "süsteemse seadistuse järgmiseks alglaadimiseks sellel\n" "või mõnel muul arvutil. Märkus: kui ühendate mälupulga\n" "praegu, oodake mõni sekund, enne kui proovite seda\n" "uuesti tuvastada.\n" "\n" "\n" "Võite muidugi jätkata ka ilma USB mälupulgata - ka sel\n" "juhul on Teil võimalik kasutada Mandrake Move'i kui\n" "tavalist Mandrake operatsioonisüsteemi." #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "Baasdokumentatsiooniga" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" "Anacron käivitab programme perioodiliselt analoogiliselt cron-ile.\n" "Kasutage seda juhul, kui Teie arvuti ei tööta 24h." #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Teil peab olema juurpartitsioon.\n" "Selleks looge uus partitsioon (või valige üks olemasolevatest).\n" "Siis valige tegevus \"Haakepunkt\" ja määrake see kui '/'" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Lääne-Sahara" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Vahendaja peab olema kujul http://..." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Lõuna-Aafrika" #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "Lint väljastatakse pärast varundamist" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Etherboot flopi/ISO" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "Printeri seadistuste muutmine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "Valige partitsioon" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "Muuda praegust reeglit" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "%s" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Palun testige hiirt" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Inode juurdepääsu kordi sellel failisüsteemil ei värskendada\n" "(nt kiiremaks juurdepääsuks uudistepuhvrile uudisteserveri kiirendamiseks)." #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 nupuga hiir ratta emuleerimisega" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "Kleepumisbitt" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "Muu andmekandja" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "Süsteemsete failide varundamine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Sektor" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "Katar" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "LDAPi alus dn" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "Seda paketti ei saa valida, sest paigalduseks napib kettaruumi" #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "Loo kiirpaigaldusflopi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Valimisviis" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "Failide jagamine" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Puhasta /tmp igal laadimisel" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Malawi" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: false" msgstr "kohalik seadistus: false" #: ../../standalone/drakperm:1 #, c-format msgid "System settings" msgstr "Süsteemsed seadistused" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "Palun valige hiire tüüp." #: ../../services.pm:1 #, c-format msgid "running" msgstr "töötab" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "riistvaralise seadme klass" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Nende masinate ja võrkude jaoks on selle arvuti küljes olevad printerid " "kättesaadavaks tehtud:" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Suurbritannia" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "Indoneesia" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "vaikeväärtus" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "Prantsusmaa [SECAM]" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "piiratud" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "vajalik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS ei toeta printereid Novelli serveritel ega printereid, mis saadavad " "andmeid suvalise vormiga käskudena.\n" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "Senegal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "Käsurida" #: ../advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" "Täisvaliku meie Linuxi lahendusi, samuti toodete eripakkumised ja muud " "\"soodustused\", leiate meie internetikaubamajast:" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "Märts" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "ligipääs administreerimisfailidele" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "Viga meili saatmisel.\n" " Raportimeili ei õnnestunud saata.\n" " Seadistage palun sendmail" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Ei luba toimida bittidel set-user-identifier või set-group-identifier\n" "(see võib tunduda turvaline, aga tegelikult ei ole, eriti kui on\n" "paigaldatud suidperl(1).)" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "Montserrat" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "Automaatsõltuvused" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Saaleala" #: ../../standalone/drakperm:1 #, c-format msgid "Custom settings" msgstr "Isetehtud" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "USB mälupulk paistab olevat kirjutuskaitsega, kuid praegu ei paista\n" "olevat turvalist võimalust seda lahti ühendada.\n" "\n" "\n" "Klõpsake nupule masina taaskäivitamiseks, ühendage mälupulk lahti,\n" "eemaldage kirjutuskaitse, ühendage seade uuesti ja käivitage taas Mandrake " "Move." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "Muu taastamine" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "TV kaart" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT printserver" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Configure CUPS" msgstr "/Seadista _CUPS" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "lspci edastamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "Eemalda valitud masin/võrk" #: ../../services.pm:1 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix on meili transpordiagent, see tähendab rakendus,\n" "mis toimetab meili ühest masinast teise." #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "Usbeki (kirillitsa)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Siin saab valida klahvi või klahvikombinatsiooni, mis laseb\n" "vahetada klaviatuuri (nt ladina ja mitte-ladina tähestikuga)" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "Võrgu kohene valmidus (hotplugging)" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "Kui on 'jah', saadetakse kontrolli tulemused tty-sse." #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "Taastamine CD-lt" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Nüüd on Teil võimalik seadistada oma arvutit Internetiühendust jagama.\n" "Selle võimaluse abil saavad teised Teie kohtvõrgu arvutid kasutada selle " "masina Internetiühendust.\n" "\n" "Kontrollige enne jätkamist, et olete seadistanud oma võrgu/Internetiühenduse " "drakconnecti abil.\n" "\n" "Märkus: kohtvõrgu (LAN) jaoks on vajalik eraldi võrgukaardi olemasolu." #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Palun valige, millist võrguliidest soovite Internetiühenduse jaoks kasutada" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "Digifoto mälukaardi lugeja Teie HP mitmefunktsionaalsel seadmel" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" "Suurendage oma arvuti jõudlust meie partnerite abiga, kes pakuvad Mandrake " "Linuxiga ühilduvaid professionaalseid rakendusi" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "Autorid: " #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Internetiühendust nüüd enam ei jagata." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "Kui on 'jah', kontrollitakse suid/sgid failide checksum-i." #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Ladina-Ameerika" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "Jaapani teksti trükkimisresiim" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "Vana seadmefail" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Info: " #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "Nupp '%s': %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Palun oodake" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "Puudub" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered IP is not correct.\n" msgstr "Sisestatud IP aadress ei ole korrektne.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Kontrollige palun, et cron-deemon on teenuste seas ja töötab." #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "Võrgukaart" #: ../../standalone/printerdrake:1 #, c-format msgid "Delete selected printer" msgstr "Kustuta valitud printer" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Info" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Paigaldus" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Valige \"%s\", kui soovite kustutada kõik sellel kettal asuvad\n" "partitsioonid. Ettevaatust, pärast \"%s\" klõpsamist ei ole enam\n" "võimalik sellelt kettalt andmeid taastada.\n" "\n" "Katkestamiseks valige \"%s\", mis katkestab tegevuse ilma andmeid\n" "ja käesoleval kõvakettal olevaid partitsioone kustutamata." #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Välju programmist" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "Andmete salvestamiseks läheb vaja mälupulka" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Kõik on seadistatud.\n" "Nüüd saate Internetiühendust jagada teistele kohtvõrgu arvutitele, kasutades " "neil automaatset konfigureerimist (DHCP)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "CUPS printserver" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Suni hiir" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Teil on vaid üks seadistatud võrguliides:\n" "\n" "%s\n" "\n" "Kohtvõrgu seadistused seotakse selle liidesega." #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "cpuinfo edastamine" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "Minimaalne paigaldus" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "Etioopia" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "JAH" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "\"Crontab\" ja \"at\" lubamine kasutajatele" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "Devanaagari" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" " -pci seadmed: näitab PCI pesa, seadet ja kaardi funktsiooni\n" "- eide seadmed: seade on kas ülem või allutatu\n" "- scsi seadmed: scsi siin ja scsi seadme id-d" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Suurus kokku: %d / %d MB" #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "keelatud" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "Uute skännerite otsimine..." #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "Serverite peatamine..." #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s paigaldamine ebaõnnestus. Tekkis järgmine viga:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "mkinitrd -f /boot/initrd-%s.img %s käivitamine ebaõnnestus." #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Olete valinud järgmise(d) serveri(d): %s\n" "\n" "\n" "Need serverid aktiveeritakse vaikimisi. Pole küll teada, et neil oleks\n" "turvaprobleeme, aga nende leidmine tulevikus pole sugugi välistatud.\n" "Kui peaks nii minema, kontrollige, et suudate uuenduse võimalikult\n" "ruttu hankida.\n" "\n" "\n" "Kas tõesti paigaldada need serverid?\n" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Võrguprinter (TCP/Socket)" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "Kasutajafailide varundamine..." #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Süsteemi paigaldus" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "Esimene nimeserver (soovituslik)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "Soovi korral võite ka sisendireal määrata seadmenime/failinime" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Kui SERVER_LEVEL (või selle puudumisel SECURE_LEVEL) failis \n" "/etc/security/msec/security.conf on suurem kui 3, loob sümbolviida \n" "/etc/security/msec/server, mis osutab failile \n" "/etc/security/msec/server..\n" "\n" "/etc/security/msec/server on fail, mida chkconfig --add kasutab\n" "otsustamaks, kas lisada teenus või mitte, kui see on pakettide\n" "paigaldamise ajal failis olemas." #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "Vene (foneetiline)" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "Dhcpd seadistamine..." #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "LiLo/grub paigaldamine" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "Iisraeli" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Printer \"%s\" serveril \"%s\"" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "Flopi võib nüüd välja võtta" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "Tõeliselt minimaalne paigaldus" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Taani" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Liigutan partitsiooni..." #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "(Selle) DHCP serveri IP" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Proovime seadistusi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "%s paigaldamine..." #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "Sõltuvalt sellest, kas valisite individuaalse pakettide valiku või mitte,\n" "näidatakse Teile gruppidesse ja alamgruppidesse rühmitatult kõiki pakette\n" "sisaldavat puud. Seda mööda liikudes võite valida või etteantud valiku\n" "tühistada tervete gruppide, alamgruppide või üksikute pakettide kaupa.\n" "\n" "Kui valite puus mõne paketi, ilmub paremal selle kirjeldus, mis annab\n" "teada, milline on paketi ülesanne.\n" "\n" "!! Kui tahtlikult või seetõttu, et asi kuulus gruppi, on valitud mõni " "serveripakett,\n" "palutakse Teilt kinnitust, et Te ikka tõesti soovite neid servereid " "paigaldada.\n" "Mandrake Linuxi puhul käivitatakse kõik paigaldatud serverid vaikimisi\n" "alglaadimise käigus. Isegi kui nad olid turvalised ja teadaolevalt " "probleemivabad\n" "ajal, mis valmis distributsioon, võib kergesti juhtuda, et pärast Mandrake " "Linuxi\n" "praeguse versiooni valmimist leiti neist turvaauke. Kui Te ei tea, mida " "konkreetne\n" "teenus pakub või miks see üldse paigaldatakse, klõpsake nupul \"%s\", sest\n" "klõps nupul \"%s\" paigaldab loetletud serverid ning nad käivituvad\n" "alglaadimise ajal automaatselt. !!\n" "\n" "Lisavõimalus \"%s\" lihtsalt keelab hoiatava dialoogi, mis ilmub\n" "alati, kui paigaldaja valib automaatselt mõne paketi. See juhtub siis, kui " "leitakse,\n" "et paigalduse edukaks lõpetamiseks on vajalik paigaldada veel mõni muu " "pakett.\n" "\n" "Väike flopiketta ikoon loendi all võimaldab avada eelmise paigalduse ajal " "valitud\n" "pakettide nimekirja. Sellel klõpsamise järel palutakse Teil sisestada " "flopiketas,\n" "mille lõite eelmise paigalduse lõpul. Vaadake ka eelmise sammu teist " "nõuannet\n" "selle kohta, kuidas sellist flopiketast luua." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "Valige failisüsteemi krüptovõti" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "Botswana" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "Andorra" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "(vaikeväärtus: %s)" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Määrab salasõna aeguma \"maks.\" n päeva pärast ning viivituse enne muutmist " "\"mittekehtivaks\"." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "Alternatiivne testlehekülg (Letter)" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "DHCP serveri seadistused.\n" "\n" "Siin saab valida erinevaid võimalusi DHCP serveri seadistustele.\n" "Kui te ei tea mõne valiku tähendust, jätke see puutumata.\n" "\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "Valige X server" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "Kopeerimine mällu CD-ROM eemaldamise võimaldamiseks" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Saaleala suurus (MB): " #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "Varukoopiaga võrreldes pole mingeid muutusi!" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Vormindatud\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "Paigalduse tüüp" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Printer \"%s\" SMB/Windows serveril \"%s\"" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "%d komaga eraldatud numbrit" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Protokoll rusers laseb üle võrgu saada informatsiooni\n" "süsteemi kasutajate kohta. Ettevaatust!" #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "Automaatsete sammude seadistamine" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Barbados" #: ../advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" "Kas soovite avatud tarkvara kogukonnast rohkem teada saada? Liituge vaba " "tarkvara maailmaga!" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "Valige palun varundamiseks andmed..." #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "Ühenduse loomine ebaõnnestus.\n" "Kontrollige palun seadistusi Mandrake juhtimiskeskuse abil." #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "saadud" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "Su lubamine ainult grupi wheel liikmetele või igale kasutajale" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "/Fail/_Uus" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "Nimeserveri IP" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "IP vahemiku lõpp:" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Kõrge" #: ../../standalone/printerdrake:1 #, c-format msgid "Add a new printer to the system" msgstr "Lisa uus printer süsteemi" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "NoVideo" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "see väli kirjeldab seadet" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Printeri lisamine StarOffice/OpenOffice.org/GIMP-ile" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "Kohalikud printerid" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "Paigalduslaadefaili kataloog" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "NIS server" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "Port: %s" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "Hispaania" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "kohalik seadistus: %s" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "See kasutajanimi on juba lisatud" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "Valige fail" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Rakenda" #: ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "Kättesaadavate portide automaattuvastus" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "San Marino" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Internetiühendust hetkel ei jagata" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "Belgia" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "Kuveit" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Valige palun käivitatav aknahaldur:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "Detsember" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "CPU alampõlvkond" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "Esimese korra nõustaja" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "Taiwan" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Pakistan" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "palun oodake, analüüsin faili: %s" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n" "Jätkake omal vastutusel." #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "Tähtsus: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Trükkimiseks Lexmarki inkjetil antud seadistusega läheb Teil tarvis Lexmarki " "pakutavaid inkjet printeri draivereid (http://www.lexmark.com/). Klõpsake " "viidal \"Drivers\". Seejärel valige oma mudel ja seejärel " "operatsioonisüsteem \"Linux\". Draiverid on kas RPM-paketid või " "shelliskriptid interaktiivse graafilise paigalduse võimalusega. Te ei pruugi " "seda seadistust sooritada graafiliste kasutajaliideste abil. Katkestage kohe " "pärast litsentsilepinguga nõustumist. Seejärel trükkige \"lexmarkmaintain\" " "abil printeripea joondamise leheküljed ning kohandage selle rakenduse abil " "pea joondamise seadistust." #: ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "Loabitid" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Teenusepakkuja tunnus (näiteks minuisp.ee)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Teie süsteemil napib ressurse ja paigaldamine võib ebaõnnestuda.\n" "Kui nii juhtub, proovige palun tekstipõhist paigaldust. Selleks\n" "vajutage CDROMilt laadimisel F1 ja sisestage 'text'" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Kasuta Windowsi partitsiooni loopbackina" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Armeenia (trükimasin)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "Ühenduse tüüp: " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "Graafiline kasutajaliides" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Tšaad" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "India" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s koos 3D graafikakiirendi toega" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "Slovakkia" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Singapur" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Kambodža" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Realaotussagedus: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "Asukoht" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "EI LEITUD" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "Siin saate määrata printeri asemele suvalise käsurea." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Trükkimissüsteemi (%s) ei käivitata automaatselt arvuti alglaadimisel.\n" "\n" "On võimalik, et automaatkäivitus lülitati välja seoses kõrgema turvataseme " "valikuga, sest trükkimissüsteem on võimaliku rünnaku objekt.\n" "\n" "Kas soovite trükkimissüsteemi automaatkäivituse taas sisse lülitada?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Printer %s\n" "Mida soovite muuta?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "Lisa masin" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Kui Te tõesti arvate, et teate, milline juhtprogramm Teie helikaardile\n" "tegelikult sobib, võite valida selle ülaltoodud nimekirjast.\n" "\n" "Teie praegune helikaart \"%s\" kasutab juhtprogrammi \"%s\" " #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Kas lubada kasutajatel jagada mõningaid oma katalooge?\n" "Lubamine võimaldab kasutajal seda teha lihtsalt klõpsuga sildil \"Jaga\" " "Konqueroris ja Nautiluses.\n" "\n" "\"Isetehtud\" lubab määrata seda kasutajate kaupa.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Valige palun paketivaliku laadimine või salvestamine flopil(t).\n" "Vorming on sama, mis automaatpaigaldusega loodud flopide puhul." #: ../../../move/tree/mdk_totem:1 #, c-format msgid "No CDROM support" msgstr "CD-ROM toetuseta" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "Hiina (tele)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "Kvootide kasutamine varukoopiafailidel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Printeri \"%s\" seadistamine..." #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Ei luba ühegi binaarfaili käivitamist haagitud failisüsteemis.\n" "See on kasulik serveritel, mille failisüsteemides on süsteemist\n" "erineva arhitektuuriga binaarfaile." #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "Internetiühendus" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Mooduli %s laadimine ei õnnestunud.\n" "Kas soovite proovida parameetreid muuta?" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "Tere tulemast avatud tarkvara maailma" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnia ja Hertsegoviina" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "See haakepunkt vajab tõelist (ext2/ext3, reiserfs, xfs või jfs) " "failisüsteemi\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Sisestage palun masinanimi või IP aadress.\n" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Holland" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "Failide saatmine FTP vahendusel" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Sisemine ISDN kaart" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Pole teada ühtegi alternatiivset OSS/ALSA juhtprogrammi Teie helikaardile (%" "s), millel praegu on kasutusel \"%s\"" #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "Tiitel" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "Fontide paigaldamine ja teisendamine" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "HOIATUS" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "Alglaaduri paigaldamine" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "korda" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "tuvastati %s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect on skriptikeele Tcl laiend, mis võimaldab interaktiivseid seansse " "ilma kasutaja sekkumiseta." #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Neitsisaared (USA)" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Kõlbmatu varukoopia" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Internetiühenduse jagamine on juba seadistatud,\n" "aga hetkel on see keelatud.\n" "\n" "Mida soovite ette võtta?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "Sisestage serveri IP aadress ja port, mille printereid soovite kasutada." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "Töö toru kaudu käsuks" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Osa Teie riistvarast nõuab tarnijapoolseid draivereid.\n" "Infot nende kohta saate: %s" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Haiti" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Otsin seadmeid..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "Isetehtud võimaldab Teil määrata päeva ja aja oma tahtmist mööda. Muude " "võimaluste puhul kasutatakse /etc/crontab-is leiduvat run-parts'i." #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Väljade kirjeldus:\n" "\n" #: ../../standalone/draksec:1 #, c-format msgid "Basic options" msgstr "Põhiseadistused" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "protsessori (CPU) nimi" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "IPv4 võltsveateadete lubamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "Printeri andmete värskendamine..." #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "Vormindada tuleb ka %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Vaadake ette: see võib olla ohtlik." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "Sisestage palun paketivalikut sisaldav flopi" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "Server: " #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "Turvahoiatused:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "Rootsi" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "Expecti kasutamine SSH jaoks" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "Poola" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "Muud pordid" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "hõivatavate puhvrite arv mmap-i jaoks" #: ../../network/adsl.pm:1 #, c-format msgid " - detected" msgstr " - tuvastatud" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "SMBus kontrollerid" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "Ühenduse aegumine (sekundites)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Mõned varasemad i486DX-100 kiibid ei suutnud korralikult naasta tööresiimi, " "kui oli kasutatud käsklust \"seiska\" (\"halt\")" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Horvaadi" #: ../../help.pm:1 #, c-format msgid "Use existing partition" msgstr "Kasuta olemasolevat partitsiooni" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "Ühendust peegliga %s ei saadud" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "/Abi/_Misvärk" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "Kasutaja kataloogid eemaldatakse enne taastamist" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Kavatsesite hakata seadistama võrguprinterit. Selleks läheb vaja töötavat " "võrguühendust, aga Teil on võrk veel seadistamata. Kui Te jätkate ilma võrku " "seadistamata, et ole Teil võimalik kasutada printerit, mida te tahate " "seadistada. Kuidas peaks nüüd edasi talitama?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "CUPS printeri seadistused" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "ei suutnud haagitud partitsioonidel leida ühtegi fonti" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "F00f viga" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "Domeeninimi:" #: ../../security/l10n.pm:1 #, c-format msgid "Root umask" msgstr "Administraatori umask" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "Flopil" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "Taaskäivituse lubamine konsooli kasutajale" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "Taastamine" #: ../../standalone/drakclock:1 #, c-format msgid "Server:" msgstr "Server:" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "Kui on 'jah', kontrollitakse, kas võrguseadmed on mitte-eelisresiimis." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Otsin saadaolevaid pakette..." #: ../../../move/move.pm:1 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Palun oodake, loon süsteemi seadistustefailid USB mälupulgal..." #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "Initsialiseerimisteade" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Päästa partitsioonitabel" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Küpros" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "Ühendus on loodud." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Eemalda RAIDist" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "See krüptovõti on liiga lihtne (peaks olema vähemalt %d märki)" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "Seadistamise nõustajad" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "ISDN ühendus" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "CD-R / DVD-R" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "esmane" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " SMB/Windowsi serveril \"%s\", jagatud printer \"%s\"" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Nüüd saate valida, millised teenused peaks käivitama alglaadimisel.\n" "\n" "Siin on üles loetud kõik teenused, mis on saadaval antud paigalduse puhul.\n" "Uurige neid hoolega ja jätke valimata kõik, mida ei ole alglaadimise ajal\n" "tingimata vajalik käivitada.\n" "\n" "Konkreetset teenust valides näete selle kohta lühikest seletavat teksti. " "Kui\n" "Te ei ole aga kindel, kas teenus on kasulik või mitte, on mõistlik jätta " "kehtima\n" "vaikevalik (olgu see siis lubav või mitte).\n" "\n" "!! Kui kavatsete oma süsteemi kasutada serverina, olge eriti tähelepanelik:\n" "tõenäoliselt ei soovi Te käivitada mittevajalikke teenuseid. Pidage meeles, " "et\n" "mõned teenused võivad serveril kasutatuna olla isegi ohtlikud. Üldiselt " "tasub\n" "valida ainult neid teenuseid, mida Teil tõesti vaja läheb.\n" "!!" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "Niue" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Jäta vahele" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "Aktiveerib süsteemi alglaadimisel kõik vajalikud võrguliidesed." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "CPU sagedus megahertsides (seda võib ligilähedaselt samastada operatsioonide " "arvuga, mida CPU suudab sekundis sooritada)" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "tähtis" #: ../../standalone/printerdrake:1 #, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "Mandrake Linuxi printerite haldur" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "Edenemine kokku" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "Esmalt otsib DrakX üles kõik Teie arvuti IDE-seadmed, püüdes samal ajal\n" "tuvastada ka PCI siini SCSI-liideseid. Kui viimaseid leitakse ja vastav(ad)\n" "draiver(id) on teada, siis laetakse ja paigaldatakse kõik vajalik " "automaatselt.\n" "\n" "Riistvara tuvastamine ei pruugi alati siiski õnnestuda ja kui see nii " "peaks \n" "minema, palub DrakX Teil teatada, kas masinas on mõni PCI SCSI-liides.\n" "\n" "Kui peate oma adapteri käsitsi määrama, küsib DrakX, kas soovite määrata\n" "ka selle parameetrid. Siin oleks mõtet lasta tegutseda DrakX-l, mis proovib\n" "järele liidese spetsiifilised omadused, mida see initsialiseerimiseks " "vajab.\n" "Tavaliselt õnnestub see edukalt.\n" "\n" "Kui automaatne parameetrite otsimine ei tööta, tuleb liides käsitsi " "seadistada.\n" "Selleks tutvuge palun lähemalt oma SCSI liidese dokumentatsiooniga\n" "või küsige abi riistvara müüjalt." #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "Aruba" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "Kasutajad" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Alglaaduri ettevalmistamine..." #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "Sisestage oma kasutajainfo, parool on vajalik ekraanisäästjale" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "Vaikelüüs (nt %s)" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Salasõnad ei klapi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "Korrektne IP aadress on näiteks:\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the media for backup." msgstr "Valige palun varundamiseks kasutatav andmekandja" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "Sagedus (MHz)" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Selle paketivaliku kasutamiseks alustage paigaldamist käsuga \"linux " "defcfg=floppy\"" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "protsessori number" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "Arvuti sisekell on seatud GMT ajale" #: ../../network/isdn.pm:1 #, c-format msgid "Do you want to start a new configuration ?" msgstr "Kas soovite alustada uue seadistusega?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "Failinimi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Valige palun port, kuhu Teie printer on ühendatud." #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "Vahetage CD-ROM" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Paraguay" #: ../../network/netconnect.pm:1 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Seadistamine on lõpetatud. Kas soovite seda nüüd rakendada ?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "Muut/diferentsvarunduse kasutamine (vanu varukoopiaid ei asendata)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" " - /etc/dhcpd.conf haldamine:\n" " \t\tEt klient saaks teha alglaadimise võrgust, vajab iga klient " "kirjet failis dhcpd.conf,\n" " \t\tmis omistab masinale IP aadressi ja võrgulaadepildi. " "drakServTerm aitab neid\n" " \t\tkirjeid luua/eemaldada.\n" "\t\t\t\n" " \t\t(PCI kaartidel võib laadepilt puududa - etherboot nõuab " "korrektset laadepilti.\n" " \t\tSilmas võiks pidada ka seda, et kui etherboot laadepilti ootab, " "eeldab ta nime\n" " \t\tkujul boot-3c59x.nbi, mitte aga boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t\n" " \t\tTüüpiline dhcpd.conf-i lõik, mis toetab kettata tööjaama, näeb " "välja selline:" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Teie helikaardile (%s) ei õnnestunud tuvastada juhtprogrammi" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "sunni peale" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "Välju" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "MÄRKUS: Sõltuvalt printeri mudelist ja trükkimissüsteemist paigaldatakse " "kuni %d MB lisatarkvara." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Ühtegi liidest ei ole seadistatud.\n" "Esmalt tuleb need seadistada, klõpsake selleks nupul 'Seadista'" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Eesti" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache on maailma juhtiv veebiserveri programm. Tõenäoliselt\n" "ka võimsaim." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "CD-kirjutaja seadmenimi\n" " nt: 0,1,0" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "KÕIK" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "Lisa/kustuta klient" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Valige võrguliides" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "Tundmatu mudel" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD kirjutajad" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partitsioonilt toimub alglaadimine\n" " (MS-DOS-i, mitte lilo jaoks)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Märkimisel võib \"%s\" faili lugeda" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "valige pilt" # #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Leiti tulemüüri seadistused!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Ühenduse nimi" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "tekstikasti x-koordinaat\n" "arvulises väljenduses" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" "Võib juhtuda, et Te ei saa LiLo-t paigaldada (sest LiLo ei suuda käsitleda " "loogilist ketas mitmel füüsilisel kettal)" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "Paketivaliku uuendamine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Kuhu soovite haakida loopback faili %s?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Flopi on edukalt loodud.\n" "Nüüd võite vajadusel paigaldust korrata." #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Varundamine CD-R/DVD-R-ile" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "hiire nuppude arv" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "Kordamine" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "Muude failide varundamine" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Flopiseade ei ole kättesaadav" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "Varukoopia failid on vigased" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "Telesüsteem:" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "Cpuid perekond" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 MB" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: thin" msgstr "tüüp: õhuke (thin)" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Leedu AZERTY (uuem)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "jah tähendab, et matemaatika-kaasprotsessoril on erandivektor" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n" "Ilma /boot partitsioonita ei ole võimalik sellist süsteemi laadida.\n" "Lisage kindlasti /boot partitsioon!" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Muu OS (MacOS...)" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "Hiire aktiveerimiseks" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Võrgu käimapanek" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Hetktõmmised asuvad pärast paigaldust asukohas %s" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Teie arvuti kõvakettal on rohkem kui üks Microsoft Windowsi partitsioon.\n" "Palun valige välja see, mille suurust soovite Mandrake Linuxi jaoks muuta.\n" "\n" "Teie abistamiseks on igal partitsioonil näidatud \"Nimi Linuxis\", \"Nimi " "Windowsis\" ja \"Mahutavus\".\n" "\n" "\"Nimi Linuxis\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n" "numbrist (näiteks \"hda1\").\n" "\n" "Kõvaketta tüüp on \"hd\", kui on tegemist IDE-kettaga, ja \"sd\", kui on\n" "tegemist SCSI-kettaga.\n" "\n" "Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE-ketastel:\n" "\n" " * \"a\" - esmase IDE kontrolleri ülem,\n" "\n" " * \"b\" - esmase IDE kontrolleri allutatu,\n" "\n" " * \"c\" - teisese IDE kontrolleri ülem,\n" "\n" " * \"d\" - teisese IDE kontrolleri allutatu.\n" "\n" "SCSI-ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n" "\n" "\n" "\"Nimi Windowsis\" on täht, millega Microsoft Windows vastavat seadet\n" "tähistab (esimene ketas või partitsioon kannab nime \"C:\")." #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "Tansaania" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Arvutan FAT failisüsteemi piire" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Varundusallikad: \n" #: ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "isetehtud" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "Faili sisu" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "LDAP autentimine" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "säilitamaks %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "Suvalise juhtprogrammi valimine" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "üle kantud" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "Palestiina" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "%d komaga eraldatud stringi" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr " isdn" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "Võimalike klaviatuuride täielik nimekiri" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "Teema nimi" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/_Abi" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "Suvalise juhtprogrammi valimine" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Cooki saared" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Siin saate valida, millised selle arvuti külge kinnitatud skännerid peaksid " "olema kättesaadavad ka teistele kohtvõrgu arvutitele ja millistele nende " "hulgast." #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "edenemisriba laius" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Partitsiooni %s vormindamine" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "Masinanime nõudmine" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "Paigaldatud fontide valiku tühistamine" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "Rattaga" #: ../../standalone/drakbug:1 #, c-format msgid "Submit kernel version" msgstr "Kerneli versiooni edastamine" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Katkesta" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "Seadistatud skännerite otsimine..." #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "Graafikakaart" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tvarukoopiad tar- ja bzip2-vormingus\n" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "Eemalda valitud" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "/_Modemite automaattuvastus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "Eemalda printer" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "Viimase logi vaatamine" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Millistel teenustel soovite lubada kasutada Internetiühendust?" #: ../../standalone/printerdrake:1 #, c-format msgid "Connection Type" msgstr "Ühenduse tüüp" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Meili seadistamise vahend.\n" "\n" "Siin saab seadistada hoiatussüsteemi.\n" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "Muu" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "Vaikimisi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "Emuleeri 2. hiirenuppu" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter a package name." msgstr "Palun sisestage paketi nimi" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "Chkrootkit kontrolli lubamine" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "type1inst loomine" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "Abiword" #: ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "valige pildifail" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X server" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "Domeeni administraatori kasutajatunnus" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Telekanalite otsingul tekkis viga" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "USA (rahvusvaheline)" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "Pole paigaldatud" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "Mõlemad Alt-klahvid korraga" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "LAN ühendus" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "/Fail/-" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "Itaalia" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "Põhiline" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "http://www.mandrakelinux.com/en/92errata.php3" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Honduras" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "pdq" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "Kaardi IO" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Samba server" msgstr "Samba server" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "See on eriline, alglaadimisel\n" "kasutatav partitsioon, mis\n" "võimaldab mitme operatsioonisüsteemi\n" "laadimist.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Valige palun iga sammu puhul, kas selle peaks läbi viima automaatselt, nagu " "see sooritati paigalduse ajal, või soovite seal ise kaasa rääkida" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Samuti saate otsustada, kas võrguskännerid peaksid olema automaatselt siin " "arvutis kättesaadavad" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-võrk FTP vahendusel.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "Kontrolli tulemused saadetakse tty-sse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "Seadme- või failinime sisestamine on kohustuslik!" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "/_Välju" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Videomälu: %s kB\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Käesolev rakendus on vaba tarkvara. Te võite seda edasi levitada\n" "ja/või muuta vastavalt GNU Üldise Avaliku Litsentsi tingimustele, nagu\n" "need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n" "või (vastavalt Teie valikule) ükskõik milline hilisem versioon.\n" "\n" "Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n" "ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n" "KVALITEEDI GARANTIITA või SOBIVUSELE TEATUD KINDLAKS\n" "EESMÄRGIKS. Üksikasjade suhtes vaadake GNU Üldist Avalikku Litsentsi.\n" "\n" "Te peaks olema saanud GNU Üldise Avaliku Litsentsi koopia koos selle\n" "rakendusega; kui ei, siis võtke ühendust Vaba Tarkvara Fondiga aadressil:\n" "Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n" "MA 02111-1307, USA.\n" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "ligipääs kompileerimisvahenditele" #: ../../standalone/net_monitor:1 #, c-format msgid "Global statistics" msgstr "Globaalne statistika" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "Valige palun taastatavad andmed..." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Kui soovite kasutada aboot-i, jätke palun ketta algusesse vähemalt 2048 \n" "sektorit vaba ruumi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "Tavaline testlehekülg" #: ../../standalone/drakclock:1 #, c-format msgid "Time Zone" msgstr "Ajavöönd" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Tekita" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "Mis" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Pakettide tellimisel tekkis viga:" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "Bulgaaria (BDS)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "Serveri keelamine" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "Failisüsteemi krüptovõti" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "Gudžarati" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" "\t\t\tKuigi võib kasutada ka IP aadresside valimikku, selle asemel et " "määrata igale\n" "\t\t\tkliendi masinale eraldi kirje, võimaldab fikseeritud aadress " "kasutamine siiski\n" "\t\t\tpruukida ClusterNFS pakutavaid kliendikeskseid seadistustefaile.\n" "\t\t\t\n" "\t\t\tMärkus: kirjet \"#type\" kasutab ainult drakTermServ. Kliendid võivad " "olla \n" "\t\t\tkas \"thin\" või 'fat'. \"Õhuke\" klient kasutab enamikku tarkvara " "serveril xdmcp\n" "\t\t\tvahendusel, \"paksud\" kliendid aga jooksutavad takrvara enamasti " "kliendi\n" "\t\t\tmasinal. Õhukeste klientide jaoks kirjutatakse eraldi inittab-fail\n" "\t\t\t%s. Õhukeste klientide puhul muudetakse xdmcp\n" "\t\t\tvõimaldamiseks süsteemi seadetefaile xdm-config, kdmrc ja gdm.conf. " "Kuivõrd\n" "\t\t\txdmcp kasutamisega kaasnevad teatud turvaprobleemid, muudetakse faile\n" "\t\t\thosts.deny ja hosts.allow, et piirata ligipääsu kohalikule " "alamvõrgule.\n" "\t\t\t\n" "\t\t\tNote: Ka kirjet \"#hdw_config\" kasutab ainult drakTermServ. Kliendid " "võivad olla kas \n" "\t\t\tkas 'true' või 'false'. 'true' lubab administraatori sisselogimist " "kliendi masinal ning \n" "\t\t\theli, hiire ja X-i riistvara kohalikku seadistamist 'drak' " "vahenditega. See saab võimalikuks \n" "\t\t\teraldi seadistustefailide loomisega, mis on seotud kliendi IP " "aadressiga, samuti \n" "\t\t\tkirjutamis/lugemisõigusega haakepunktide loomisega, mis lubab kliendil " "faili muuta. \n" "\t\t\tKui jääte seadistusega rahule, võite administraatori privileegid " "kliendilt ära võtta.\n" "\t\t\t\n" "\t\t\tMärkus: server tuleb peatada/käivitada pärast kliendi lisamist või " "muutmist." #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Valige palun esimene number kümnesest vahemikust, mida soovite\n" "muuta, või vajutage Enter jätkamiseks.\n" "Ja Teie valik on? " #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" msgstr "" "\n" " Autoriõigus (C) 2002: MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "Teema salvestamine" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Brasiilia" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "Automaatpaigaldus" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "Võrguseadistuste nõustaja" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "Eemaldatava andmekandja automaatne haakimine" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "Trükkimine" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "Kataloog, kuhu salvestada:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Ei leitud ühtegi printerit, mis oleks masinaga otse ühendatud" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Loo uus partitsioon" #: ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "Juhtprogramm: " #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "Tundmatu" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Kasuta fdisk-i" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "KEERUTAGE RATTAKEST!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "saadetud: " #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Automaatne IP" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "Ja nüüd ongi paigaldus selja taga ning Teie GNU/Linuxi süsteem valmis " "tööks.\n" "Selleks tuleb vaid klõpsata \"%s\" ning arvuti teeb taaskäivituse, mille " "järel\n" "võite valida, kas käivitada GNU/Linux või Windows (kui Teie arvutil on mitu\n" "süsteemi).\n" "\n" "Nupp \"%s\" pakub veel kaks võimalust:\n" "\n" " * \"%s\": loob paigaldusflopi, mis sooritab kogu\n" "paigalduse ilma kasutajata, paigaldus ise on samasugune nagu äsja\n" "seljataha jäänu.\n" "\n" " Selle valiku korral ilmub veel kaks erinevat võimalust:\n" "\n" " * \"%s\". See on osaliselt automaatne, sest partitsioneerimisel\n" "(aga ka ainult seal) on võimalik sekkuda.\n" "\n" " * \"%s\". Täisautomaatne paigaldus: kõvaketas kirjutatakse täielikult\n" "uuesti, kõik varasemad andmed kustutatakse.\n" "\n" " See võimalus võib olla kasulik, kui paigaldamine on kavas ette võtta " "paljudel\n" "ühesugustel masinatel. Lähemalt vaadake meie veebileheküljel\n" "automaatpaigalduse sektsiooni.\n" "\n" " * \"%s\"(*): salvestab paigalduse käigus valitud pakettide\n" "nimekirja. Kui nüüd võtate ette uue paigalduse, asetage flopi seadmesse " "ning\n" "käivitage paigaldus klahvile [F1] vajutades abiekraani vahendusel, andes " "käsu\n" ">>linux defcfg=\"floppy\"<<.\n" "\n" "(*) Selleks läheb vaja FAT-vormingus flopit (sellise loomiseks GNU/Linuxis\n" "andke käsk \"mformat a:\")" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "Moldova" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "Võrguprinteri seadistamine" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "Internetiplatvorm, mis vastab firmade spetsiifilistele tugivajadustele" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URLi alguses peab olema 'ftp:' või 'http:'" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "Oria" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "Uue reegli lisamine lõppu" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "LiLo ja käivituslogo teemade paigaldus õnnestus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Samuti saate otsustada, kas võrguprinterid peaksid olema automaatselt siin " "arvutis kättesaadavad" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Nüüd võite moodulile %s parameetreid määrata.\n" "Parameetrid on vormingus \"nimi=väärtus nimi2=väärtus2 ...\".\n" "Näiteks: \"io=0x300 irq=7\"" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Kas väljuda partitsioonitabelit salvestamata?" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "kõvakettale" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "Pakettide paigaldamine..." #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Hollandi" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Angola" #: ../../standalone/drakbackup:1 #, c-format msgid "The following packages need to be installed:\n" msgstr "Paigaldada tuleb järgmised paketid:\n" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "teenuse seadistused" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Isetehtud" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "Läti" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "See fail on juba loopback-ina kasutusel, valige mõni muu" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "Ainult lugemisõigusega" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" "Nimelahenduse võltsimiskaitse lubamine/keelamine. Kui\n" "\"alert\" on tõene, saadetakse ka raport syslog-i." #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "Juhtprogrammi ei õnnestunud tuvastada" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 MB" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Kui see ei ole printer, mida soovite seadistada, kirjutage sisendireale " "seadmenimi/failinimi" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Teie masinas ei leitud helikaarti. Kontrollige palun, et Linuxi toega " "helikaart on korrektselt ühendatud.\n" "\n" "\n" "Meie riistvara andmebaasi saab näha aadressil:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "Kohtvõrgu (LAN) seadistamine..." #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "USB mälupulk paistab olevat kirjutuskaitsega. Palun ühendage\n" "see lahti, eemaldage kirjutuskaitse ja ühendage siis uuesti." #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "Käivitab helisüsteemi" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Suid/sgid failide kontrollsumma kontroll" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "Rpm andmebaasi mõningane kontroll" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "Käivitada" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "Printeri andmebaasi ettevalmistamine..." #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "Info" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "Võrgukaart puudub" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 nupuga" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "Millist failisüsteemi soovite kasutada?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Malta" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "Üksikasjalik info" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Printeri vaikeseadistused\n" "\n" "Kontrollige palun, et lehekülje suurus ja tinditüüp/trükiresiim (kui " "võimalik), samuti laserprinterite riistvaralised seadistused (mälu, " "dupleksseade, lisasalved) oleksid määratud korrektselt. Pange tähele, et " "väga suure trükikvaliteedi või lahutusvõime puhul muutub trükkimine " "märgatavalt aeglasemaks." #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "See flopi ei ole FAT-vormingus" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Võrguseadistused" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Selle märkimine võimaldab salvestada muudetud failid. Täpne viis sõltub " "sellest, kas valida muut- või diferentsvarundus." #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "Graafikakaart" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Arvutan Windowsi failisüsteemi piire" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Kamerun" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "DNS 1 (võib jätta tühjaks)" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Nüüd saate partitsioneerida %s kõvaketta\n" "Kui olete valmis, salvestage käsuga 'w'" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "Saami (Rootsi/Soome)" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "Sulge" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" "\"%s\": võimaldab konrollida praegust maa valikut. Kui see ei ole riik,\n" "kus Te viibite, vajutage nuppu \"%s\" ja valige mõni muu maa. Kui\n" "Teie maad ei ole ilmuvas nimekirjas, vajutage nuppu \"%s\", mis avab\n" "riikide täisnimekirja." #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Kalender" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "Taasta valitud\n" "kataloogikirje" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Et kasutada teise masina lpd printerit, peate sisestama printserveri nime ja " "serveril kasutatava printeri nime." #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "Island" #: ../../standalone/drakconnect:1 #, c-format msgid "Network & Internet Configuration" msgstr "Interneti ja kohtvõrgu seadistused" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "consolehelper puudub" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "peatatud" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Kas FPU-l on irq vektor" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Ava puu" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "Vana \"%s\" juhtprogramm on mustas nimekirjas.\n" "\n" "On teatatud, et see tekitab mahalaadimisel kernelile jama.\n" "\n" "Uut \"%s\" juhtprogrammi kasutatakse järgmisel alglaadimisel." #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "Ekspertresiim" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Printeri valikud" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "Kohtvõrgu aadress" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Varunda süsteemsed failid (kataloog /etc)" #: ../../security/help.pm:1 #, c-format msgid "Set the user umask." msgstr "Kasutaja umask-i määramine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Teil on nüüd võimalus alla laadida uuendatud pakette. Need on välja lastud\n" "pärast Mandrake Linuxi distributsiooni ilmumist ja võivad sisaldada vigade\n" "parandusi või turvauuendusi.\n" "\n" "Allalaadimiseks peab Teil olema töötav internetiühendus.\n" "\n" "Kas soovite uuendusi paigaldada?" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "Samba server" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "Austraalia Optus kaabli-TV" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / väljade vahel | valib | järgmine samm " #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "Alamvõrk:" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "Millal" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "Selleks vajate Alcateli Microcode'i.\n" "Seda saate alla laadida võrgust\n" "%s\n" "ja saadud 'mgmt.o' kopeerige kataloogi /usr/share/speedtouch" #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "Tundi" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "Teine nimeserver (soovituslik)" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Soome" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Värvisügavus: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "Laadimine flopilt" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "Ajavöönd - DrakClock" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "Ipv4 veidrate pakettide logimise lubamine/keelamine" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "Sloveenia" #: ../../standalone/mousedrake:1 #, c-format msgid "Mouse test" msgstr "Hiire test" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Drakperm on kasutatav failide vaatamiseks, et mseci abil parandada loabitte, " "omanikke ja gruppe.\n" "Võite ka muuta oma reegleid, mis tühistavad vaikereeglid." #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Sisesta kasutaja\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- PCI- ja USB-seadmed: tootja, seade, allettevõtja ja allseadme PCI/USB id-d" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "Edenemisriba värvi valimine" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Praegu on kasutusel sellised kirjed.\n" "Te võite neid lisada ning olemasolevaid muuta." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" "Rakenduse nimi\n" "või täielik otsingutee:" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Laseb käivitada ühekordseid käske etteantud ajal või ootab süsteemi\n" "koormuse laskumist käsu käivitamiseks piisavale tasemele." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "Raadiotugi:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "SANE pakettide paigaldamine..." #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "LDAP" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "Muuda tüüpi" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr ", USB printer #%s" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "SILO paigaldamine" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Õnnitlen, paigaldamine on edukalt lõpetatud.\n" "Võtke palun välja flopi ja/või CD ja vajutage Enter alglaadimiseks.\n" "\n" "\n" "Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n" "Mandrake Linuxi koduleheküljelt:\n" "\n" "\n" "%s\n" "\n" "\n" "Abi süsteemi edasiseks seadistamiseks saab eelkõige dokumendist\n" "\"Official Mandrake Linux User's Guide\"." #: ../../standalone/drakclock:1 #, c-format msgid "Enable Network Time Protocol" msgstr "Võrguajaprotokolli lubamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "paranoiline" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "Vajaduse puudumisel teadet ei saadeta" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Teie skänner(id) ei ole võrgus kättesaadavad." #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "Pärast iga varundamist saadetakse raport:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Seda käsku saab kasutada ka paljude rakenduste trükkimisdialoogi väljal " "\"Trükkimiskäsk\". Kuid seal ei ole vaja kirjutada failinime, sest selle " "annab rakendus ise.\n" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Kuvatihedus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Et trükkida SMB printeril, peate andma vastava serveri SMB nime\n" "(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja võib-olla ka\n" "printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n" "nime ning serveri poolt aktsepteeritud kasutajatunnuse, salasõna ja töögrupi." #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" " su lubamine ainult grupi wheel liikmetele või su lubamine igale kasutajale" #: ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "uuesti seadistada" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n" "SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE." #: ../../security/l10n.pm:1 #, c-format msgid "Shell timeout" msgstr "Shelli aegumine" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "Xinetd teenus" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "ligipääs võrgutöövahenditele" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "HP LaserJet 1000 püsivara laadimine" #: ../advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" "Mandrake Linux võimaldab teil kasutada uusimat tarkvara helifailide " "mängimiseks, piltide või fotode töötlemiseks ning videode vaatamiseks" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Nimekiri kõigist automaatselt tuvastatud printeritest. " #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Viga aboot-i paigaldamisel, \n" "kas sundida peale, riskides esimese partitsiooni hävinguga?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Taasta valitud\n" "failid" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s on olemas, kas kustutada?\n" "\n" "Hoiatus: Kui te olete selle protsessi juba sooritanud, tuleks\n" " Teil ka kirje kustutada serveril autoriseeritud võtmete seast." #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Palun täitke allpool olev väli" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Kas salvestada /etc/fstab muudatused" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "Laadimisprotokoll" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-kettad %s\n" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "Alglaadimisel" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "Vajalik on pakett %s. Kas paigaldada see?" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "Siinitunnus" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "Vatikan" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Palun tehke oma andmetest kõigepealt varukoopia" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "ADSL kaardid" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Teil on rohkem kui üks kõvaketas, millisele neist paigaldate Linuxi?" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "Eritrea" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "Alglaadimis-ISO" #: ../../network/adsl.pm:1 #, c-format msgid "Firmware needed" msgstr "Vajalik on püsivara" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "Eemalda loend" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "Kohandatav töökeskkond" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "Inuktituti" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "Mõningad protokollid, näiteks rsync, seadistatakse serveril ning nende puhul " "tuleks kataloogi otsingutee asemel kasutada teenuse 'mooduli' nime." #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Maroko" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "Milline on Teie printeri mudel?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "Lisa uus printer" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr " Kõik valitud andmed on " #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Nepal" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "<-- Kustuta" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "cpu # " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "ühiku suurus" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Kui on \"KÕIK\", on lubatud nii /etc/issue kui /etc/issue.net.\n" "\n" "Kui on \"MITTE KEEGI\", ei ole kumbki lubatud.\n" "\n" "Muidu on lubatud ainult /etc/issue." #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr " sulogin(8) lubamine/keelamine üksikkasutaja tasemel" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "suvandeid enne laadimist ja 'c' veel enam." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Probleemid paketi %s paigaldamisel" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Saate hoiatuse, kui koormus on siin määratust suurem" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "Skänneri lisamine käsitsi" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "Värskenda" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "Laadi partitsioonitabel uuesti" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" "Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Selected" msgstr "Taasta valitud" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "Fontide otsing paigaldatute loendis" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "Kohtvõrgu lõpus ei seisa '0', visatakse minema." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "Alglaadimine" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr " ja CD on sisse pandud" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "Tuuneri tüüp:" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" "Siin saate valida oma arvutile trükkimissüsteemi. Teised " "operatsioonisüsteemid\n" "võivad Teile pakkuda vaid üht süsteemi, kuid Mandrake Linuxi puhul saate\n" "valida tervelt kahe seast.\n" "\n" " * \"%s\" - mis tähendab ``trüki kohe'' (``print, don't queue'') - tuleks " "valida siis,\n" "kui Teil on printeriga otseühendus, Te ei soovi näha mingeid järjekordi ja " "Teil\n" "ei ole võrgus asuvaid printereid. Võrkude puhul on \"%s\" mõnevõrra aeglane " "ja\n" "tal võib esineda tegutsemisraskusi. Kui see on Teie esimene retk GNU/Linuxi\n" "maailma, valige \"pdq\".\n" "\n" " * \"%s\" - ``tavaline UNIXi trükkimissüsteem'' (``Common Unix Printing\n" "System'') - on hiilgav valik trükkimiseks Teie kohalikul printeril ja veel " "nii pooles\n" "maailmas. See on lihtne süsteem, mis võib olla nii kliendiks kui serveriks " "iidsele\n" "trükkimissüsteemile \"lpd\". See on ka ühilduv varasemate süsteemidega.\n" "suudab teha palju asju, kuid põhitegutsemine on sama lihtne kui \"pdq\" " "puhul.\n" "Kui Teil on vajadus emuleerida \"lpd\"-serverit, tuleb sisse lülitada\n" "\"cups-lpd\"-deemon. \"%s\" pakub ka mitut graafilist kasutajaliidest\n" "trükkimiseks või printeri seadistamiseks.\n" "\n" "Kui leiate hiljem, et siinkohal langetatud valik polnud vahest kõige parem,\n" "siis saate seda muuta Mandrake juhtimiskeskuses PrinterDrake abil." #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "\"Menüü\"-klahv" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "Kontrollige palun, kas Printerdrake automaattuvastus määras Teie printeri " "mudeli õigesti. Valige loendist õige mudel, kui kursor seisab vale mudeli " "või \"toorprinteri\" kohal." #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "Turvaadministraator:" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "Shelli aegumise määramine. Null tähendab aegumise puudumist." #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "Püsivara kopeerimine õnnestus" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" "Muud CD-ROMi ei saa valida, kui töötavad järgmised programmid: \n" "%s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "Kui on 'jah', kontrollitakse failide loabitte kasutajate kodukataloogis." #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Teil ei ole Internetiühendust.\n" "Looge see klõpsuga nupul 'Seadista'" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "Fontide kopeerimine" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Automaatne" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Kas soovite seadistusi proovida?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "Printer \"%s\" eemaldati edukalt StarOffice/OpenOffice.org/GIMP-ilt." #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "Salvesta paketivalik" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "/_Tegevused" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "Eemalda viimane element" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "Taastatav kasutajate loend (olulised on ainult kõige uuemad andmed)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "Võrgu alglaadefaile pole loodud!" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "pptp" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Valige, millised teenused tuleks alglaadimisel käivitada" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "Kõigi kirjutatavate failide/kataloogide kontroll" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "Printeri kasutama õppimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "Seadistada võrk otsekohe" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Valige peegel, millelt lugeda pakettide nimekiri" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT-partitsiooni suurust ei õnnestunud muuta, \n" "ilmnes selline viga: %s" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: " msgstr "Suurus: " #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "Millisele sektorile soovite seda ümber paigutada?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Bahama saared" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "Kas soovite sellel nupul klõpsata?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "Käsitsiseadistamine" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "otsing" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "See pakett laeb süsteemi käivitumisel klaviatuuripaigutuse vastavalt\n" "failis /etc/sysconfig/keyboard kirjeldatule. Vähe on juhtumeid, kus\n" "seda teenust vaja ei läheks." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (paigalduse kuvadraiver)" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zeroconfi masina nimi ei tohi sisaldada punkti (.)" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "Icmp echo aktsepteerimine/tagasilükkamine" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "Syslog-i kaudu toimub süsteemis toimiva logimine. Vajalik!" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "Tundmatu/Muu" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "TV-kaarti ei leitud!" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Eelistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Printer \"%s\" on määratud vaikeprinteriks." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Asusite seadistama OKI laserprinterit (winprinter). Need\n" "kasutavad väga omapärast sideprotokolli ja töötavad seepärast ainult " "esimeses paralleelpordis. Kui Teie printer on ühendatud mõnda muusse porti " "või printserveriga, ühendage palun see esimese paralleelpordiga, enne kui " "trükite testlehekülje. Vastasel juhul printer lihtsalt ei tööta ja draiver " "eirab Teie määratud ühendusviisi." #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "CPU põlvkond (nt 8, kui on PentiumIII ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "Automaatselt tuvastatud" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Nüüd on Teil võimalik seadistada oma arvuti paigaldamaks PXE serverit DHCP " "serveri \n" "ja TFTP serveri rollis, et luua paigaldusserver.\n" "Selle võimaluse abil saavad teised Teie kohtvõrgu arvutid kasutada seda " "masinat endale süsteemi paigaldamiseks.\n" "\n" "Kontrollige enne jätkamist, et olete seadistanud oma võrgu/Internetiühenduse " "drakconnecti abil.\n" "\n" "Märkus: kohtvõrgu (LAN) jaoks on vajalik eraldi võrgukaardi olemasolu." #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) oli esimene heli-API. See on op-süsteemist sõltumatu " "heli-API (saadaval enamiku UNIX-süsteemide tarbeks), kuid samas väga " "elementaarne ja piiratud.\n" "Ja pealegi kipuvad OSS-draiverid kogu aeg jalgratast uuesti leiutama.\n" "\n" "ALSA (Advanced Linux Sound Architecture) kujutab endast moodulistatud\n" "arhitektuuri, mis toetab päris suurt hulka ISA-, USB- ja PCI-kaarte.\n" "\n" "See pakub ka palju arenenumat API-t kui OSS.\n" "\n" "Alsa kasutamiseks võib tarvitada:\n" " -vana ühilduvat OSS API-t\n" "- uut ALSA API-t, mis pakub hulga täiustatud võimalusi, kuid nõuab ALSA " "teegi kasutamist.\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Ruumi 1MB-se alglaadimisala loomiseks napib! Paigaldus jätkub, kuid süsteemi " "alglaadimiseks tuleb Teil luua DiskDrake abil alglaadimisala" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Valige palun printer, mida soovite seadistada, või kirjutage sisendireale " "seadmenimi/failinimi" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Keeldun" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "KOHALIK" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake kontrollib riistvara ja lisavõimalusena ka seadistab\n" "uue või muudetud riistvara." #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "Faili %s loomine ja vormindamine" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "Kui on 'jah', kontrollitakse sgid failide lisamist/eemaldamist." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "HP LaserJet 1000 vajab pärast sisselülitamist püsivara laadimist. Laadige HP " "veebileheküljelt alla Windowsi draiveripakett (püsivara printeri CD-l ei " "toimi) ning pakkige püsivarafail lahti, kasutades 'unzip' utiliiti ning " "otsides faili 'sihp1000.img'. Kopeerige fail kataloogi '/etc/printer'. Seal " "suudab automaatne laadimisskript selle üles leida ja laadida iga kord, kui " "printer on ühendatud ja sisse lülitatud.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Vali olemasolev LVM, millele lisada" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "xfs taaskäivitamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Printer \"%s\" on juba olemas,\n" "kas tõesti kirjutada selle seadistused üle?" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "Skännerite kasutamine masinatel:" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "Tühista kõigi valimine" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "Ei leia partitsioone" #: ../../standalone/printerdrake:1 #, c-format msgid "Printer Management \n" msgstr "Printerite haldamine \n" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "Domeeninimede lahendaja" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "Krüptovõti (uuesti)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "Samba jagatava printeri nimi puudub!" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "TrueType paigaldus tehtud" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "Toimub tuvastamine..." #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "Loo terve kernel -->" #: ../../network/netconnect.pm:1 #, c-format msgid "modem" msgstr "modem" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "See ongi %s" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.1\n" "Autoriõigus (c) 2003 Mandrake Soft.\n" "See on vaba tarkvara, mida võib levitada vastavalt GNU Üldise Avaliku " "Litsentsi tingimustele.\n" "\n" "Kasutamine: \n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Pange palun moodulite uuendamise flopi seadmesse %s" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "Käivituslogo" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Teie süsteemiga on ühendatud\n" "\n" "%s%s\n" "printer" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Printeri jagamine masinal/võrgus:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Käsk \"%s\" võimaldab muuta ka konkreetse trükkimistöö valikuid. Selleks " "lisage vaid soovitud valik käsureale, nt \"%s \". " #: ../../standalone/drakclock:1 #, c-format msgid "DrakClock" msgstr "DrakClock" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Mõnel juhul vajab %s juhtprogramm tööks lisainformatsiooni,\n" "kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n" "määrata või lasta juhtprogrammil ise Teie arvutit kompida? Võib juhtuda,\n" "et see viib arvuti segadusse, kuid ei tohiks mingit jäävat kahju teha." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "CD nimi pole korrektne. Ketta nimi on %s." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Deemon (%s) vahendusel:\n" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Kuuba" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "Oktoober" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "Belize" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "Uute printerite otsimine..." #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr " (mitmeseansiline)" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "Ajapiirang kerneli laadimisel" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n" "XFree %s toetab Teie videokaarti ja võib omada paremat 2D tuge." #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr " Igapäevase turvakontrolli lubamine/keelamine" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Libsafe lubamine, kui see süsteemist leitakse" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX kettajagamise nõustaja leidis sellised lahendused:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Ungari" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Valige oma teenusepakkuja.\n" "Kui see ei ole nimekirjas, valige 'Tundmatu'." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Aja automaatne sünkroniseerimine (NTP abil)" #: ../../network/adsl.pm:1 #, c-format msgid "Use my Windows partition" msgstr "Windowsi partitsiooni kasutamine" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 MB" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "LDAP server" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA tugi on tavaliselt vajalik sülearvutitele võrgu- ja\n" "modemiliideste lisamiseks." #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "Valige riik" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Süsteemsed failid:\n" #: ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "Autonoomsed vahendid" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "Kus" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "aga ei sobi" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Siin saate valida alternatiivse juhtprogrammi (OSS või ALSA) oma " "helikaardile (%s)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kaartide seadmine..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "kdesu puudub" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s nõuab ksutajatunnust...\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "Krüptovõti" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "See aktiveeritakse pärast paigaldust.\n" "Paigalduse ajal tuleb erinevate klaviatuuripaigutuste\n" "vahel liikumiseks kasutada parempoolset Ctrl-klahvi." #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Jõulusaar" #: ../../mouse.pm:1 #, c-format msgid "Automatic" msgstr "Automaatne" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "Alglaaduri paigaldamine ebaõnnestus. Tekkis järgmine viga:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI kanal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "Määra vaikeprinteriks" #: ../../standalone/drakbackup:1 #, c-format msgid "Verify that %s is the correct path" msgstr "Kontrollige, et %s on korrektne otsingutee" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "partitsioon %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Paranoiline" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "<-- Kustuta kasutaja" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "Asukoht siinil" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "Printerit ei leitud!" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "seadme tootja nimi" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Tühjenda kogu ketas" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Vaikimisi)" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "Automaatne ümberseadistamine" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "Saamise kiirus:" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks ja Caicos" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "IP puudub" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "<- Eelmine" #: ../../standalone/drakbackup:1 #, c-format msgid "Transfer Now" msgstr "Kanna kohe üle" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "Administraatori salasõna ja võrguautentimismeetodite määramine" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Sorteeritud või sorteerimata" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "Teemad" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Eelistused: %s" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Praegu on Teil alglaadimise haldurina kasutusel %s.\n" "Valige seadistamisnõustaja käivitamiseks 'Seadista'." #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "OKI winprinteri seadistused" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "Saint Helena" #: ../../printer/main.pm:1 #, c-format msgid "Parallel port #%s" msgstr "Paralleelpordis #%s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "Turvatase" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Mõned sammud ei ole lõpule viidud.\n" "\n" "Kas soovite tõesti praegu lõpetada ja väljuda?" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "Sudaan" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Poola (QWERTZ)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "Süüria" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Kas Teie printer on mitmefunktsionaalne HP või Sony toode (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 skänneriga, DeskJet 450, Sony IJP-V100) " "või vahest HP PhotoSmart ehk siis HP LaserJet 2200?" # NOTE: this message will be displayed at boot time; that is# only the ascii charset will be available on most machines# so use only 7bit for this message (and do transliteration or# leave it in English, as it is the best for your language)##. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Tere tulemast! Laadimisel aitab Teid %s!\n" "\n" "Valige nimekirjast eelistatav OS,\n" "vaikimisi oodake %d sekundit.\n" "\n" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Portugali" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Loopback faili nimi:" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Nimeserveri aadress peab olema kujul 1.2.3.4" #: ../../keyboard.pm:1 #, c-format msgid "Left Control key" msgstr "Vasakpoolne Ctrl-klahv" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "Serbia" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "Uus-Meremaa" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "See kataloog peab jääma kokku juurfailisüsteemiga" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "üle võrgu" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "CapsLock-klahv" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Alglaaduri seadistused" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Valige graafikamälu suurus" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Crontab ja at lubamine/keelamine kasutajatele.\n" "\n" "Lubatud kasutajad kirjutatakse failidesse /etc/cron.allow ja /etc/at.allow " "(vt man at(1) ja crontab(1))." #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" "[VÕTMED]\n" "Kohtvõrgu ja Interneti ühenduse ja jälgimise rakendus\n" "\n" "--defaultintf liides : näidab vaikimis antud liidest\n" "--connect : ühendab Internetiga, kui ei ole veel ühendust\n" "--disconnect : lahutab Internetist, kui on juba ühendus\n" "--force : koos võtmega (dis)connect : sunni ühendama/lahutama\n" "--status : vastuseks 1, kui on ühendatud, muul juhul 0 ja väljumine.\n" "--quiet : lülitab välja interaktiivsuse. Koos võtmega (dis)connect." #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "Dünaamiline IP-aadresside vahemik:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "LVM nimi?" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Mõned seadmed riistvaraklassis \"%s\" eemaldati:\n" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Leiti %s %s liidest" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "Paigaldusjärgsed seadistused" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "Sisemine domeeninimi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "Kaardi IRQ" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "logdrake" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "Fontide importimise ja jälgimise " "rakendus \n" "--windows_import : impordib kõigilt saadaolevailt windowsi " "partitsioonidelt.\n" "--xls_fonts : näitab kõiki fonte, mis on juba saadud xls-ist.\n" "--strong : fontide tugev verifitseerimine.\n" "--install : paigaldada iga fondifail ja kataloog.\n" "--uninstall : eemaldada iga font või fondikataloog.\n" "--replace : asendada kõik fondid, kui on juba olemas.\n" "--application : 0 mitte ükski rakendus.\n" " : 1 iga toetatud ja saadaolev rakendus.\n" " : rakenduse_nimi näiteks so StarOffice'i \n" " : ja gs GhostScripti puhul." #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Valige flopiseade, mida kasutada alglaadimisketta tegemiseks" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "LiLo tekstiresiimis" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "otsekohene" # #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "Kõik (tulemüür puudub)" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "Teil peab olema kerneli laadepilt" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr ", mitme funktsiooniga seade USB-l" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "Tee ära" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Proovin lugeda peeglilt pakettide nimekirja..." #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Leedu AZERTY (vanem)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Brasiilia (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "Masina/võrgu IP aadress:" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "edenemisriba ülemise vasaku\n" "nurga y-koordinaat" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "Süsteemi paigaldus" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Saint Vincent ja Grenadiinid" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Konsooli kasutajale taaskäivituse lubamine/keelamine" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "/Fail/_Ava" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "Faili auto_install.cfg asukoht" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "Open Firmware viivitus" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "Ungari" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Uus-Meremaa" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "Värviseadistused" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Mõned piirangud on juba peal ja igal ööl viiakse läbi veel hulk automaatseid " "kontrollimisi." #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "valige palun kuupäev/aeg, kust taastada" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Hollandi Antillid" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "Ext2 vahetamine ext3 vastu" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "LPRng" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "Uue taastamishoidla valimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Printeri seadistamise nõustaja\n" "\n" "Nõustaja võimaldab Teile paigaldada kohalikke või võrguprintereid, mida saab " "kasutada Teie masin, samuti teised võrgus olevad masinad.\n" "\n" "Teil palutakse määrata kogu vajalik info printeri seadistamiseks, see " "tähendab olemasolevad printeridraiverid, draiveri valikud ja printeri " "ühendusviis." #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "ja %d tundmatut printerit" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Varastel Inteli Pentium-kiipidel oli viga ujukomaprotsessoris, mis ei " "saavutanud vajalikku täpsust ujukomajagamist (FDIV) sooritades" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" "Varunduskvoot on lõhki!\n" "%d Mb kasutatud, %d Mb eraldatud." #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "PCI ISDN kaarti ei leitud. Palun valige see järgmisel sammul." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "GB" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Palun andke kasutajanimi" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "CD-lt laadimine lubatud?" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "Ainult taaskäivitus" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr " kirjutage tühja kirje puhul 'void'" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" "Varukoopiad haakimata andmekandjal - taastamiseks kasutatakse kataloogi" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "Jaanuar" #: ../../security/l10n.pm:1 #, c-format msgid "Password history length" msgstr "Salasõna puhvri suurus" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "Ühendus \"Winmodemiga\"" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "Õnnitleme, Teie printer on nüüd paigaldatud ja seadistatud!\n" "\n" "Nüüd võite trükkida, kasutades rakendustes käsku \"Trüki\"\n" "(enamasti peitub see menüüs \"Fail\").\n" "\n" "Kuii soovite printerit lisada, eemaldada või ümber nimetada või soovite " "muuta vaikeseadistusi (trükikvaliteet, paberisalv,...), valige Mandrake " "juhtimiskeskuse \"Riistvara\" sektsioonis \"Printer\"." #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Nüüd võite xawtv tööle panna (X Window keskkonnas!) !\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Saaleala on paigalduseks liiga väike, palun suurendage seda" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "%s asukohas %s" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid remote root login." msgstr "Administraatori võrgust sisselogimise lubamine/keelamine" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" "GNU/Linux kasutab GMT (Greenwichi) aega ning teisendab selle\n" "kohalikuks ajaks vastavalt Teie valitud ajavööndile. Seda võib siiski ka " "välja\n" "lülitada, kui jätta märkimata \"%s\". Sellisel juhul kajastab\n" "arvutikell sama aega, mis süsteemi kell. See võib olla kasulik, kui masinas " "on\n" "veel mõni operatsioonisüsteem, näiteks Windows.\n" "\n" "Võimalus \"%s\" võimaldab kellaaega reguleerida,\n" "ühendudes Internetis mõne ajaserveriga. Pakutavas nimekirjas valige mõni\n" "lähemal asuv server. Mõistagi peab selle võimaluse kasutamiseks olema ka\n" "Internetiühendus. Tegelikult paigaldab see Teie arvutile ajaserveri, mida " "saab\n" "kasutada isegi teiste kohtvõrgus olevate masinate aja täpsustamiseks." #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "Logifaili ei õnnestunud luua!" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "Millises ajavöötmes asute?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use .backupignore files" msgstr "Kasutatakse .backupignore faile" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "Guinea" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "Süsteem on nüüd Internetti ühendatud." #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Lõuna-Georgia ja Lõuna-Sandwichi saared" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "Jaapan (tele)" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "Monitor\n" "\n" " Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n" "ühendatud monitori. Kui see ei peaks siiski õnnestuma, saate siin toodud\n" "nimekirjast valida monitori, mis Teil tegelikult on." #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Mosambiik" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Ikoon" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Kill those programs" msgstr "Tapa need programmid" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "Valige palun, mida soovite varundada" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 värvi (8 bitti)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Read-write" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Suurus: %s\n" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "Masinanimi: " #: ../../standalone/drakperm:1 #, c-format msgid "Add a rule" msgstr "Lisa reegel" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Ühiku suurus %s\n" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "Looge ise Linuxi parem tulevik!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "Kohalik printer" #: ../../network/tools.pm:1 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Flopile ei õnnestunud ligi pääseda ega haakida seadet %s" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" "[--file=minufail] [--word=minusõna] [--explain=regulaaravaldis] [--alert]" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "ADSL ühendus" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Seadistus puudub, klõpsake palun nupul Nõustaja või Muud.\n" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "Viga!" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "leiti kaabliühendus" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "%s ülekandmiseks %s-le puudub luba" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/_Vearaport" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "Dominica" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Muuda suurust" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Kuvatihedus: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Ligipääs Teie kernelile vastavatele kerneli moodulitele ebaõnnestus (puudub " "fail %s), mis enamasti tähendab, et Teie alglaadimisflopi ei ole sünkroonis " "paigaldus-andmekandjaga (palun looge uus alglaadimisflopi)" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Palun valige õige port. Näiteks MS Windowsi \"COM1\" kannab\n" "GNU/Linuxis nime \"ttyS0\"." #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Eemaldamiseks on valitud järgmised paketid" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "Loo internetiühendus" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Kasuta olemasolevat partitsiooni" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Kanada (Quebec)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Hiire port: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "Korrektsete fontide uuestivalimine" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "Valikud\n" "\n" " Siin saab valida, kas soovite kasutada graafilist töökeskkonda\n" "kohe alglaadimisel. Pange tähele, et seda päritakse ka siis, kui Te ei " "proovinudki\n" "seadistusi testida. On üsna ilmne, et vastus kõlab \"%s\", kui masina " "ülesanne\n" "on tegutseda serverina või kui Teid ei kippunud seadistamise ajal edu saatma." #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "Mandrake äriekspert" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [kõik]\n" " XFDrake [--noauto] monitor\n" " XFDrake kuvatihedus" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "Kirjutuskaitse" #: ../../standalone/drakfont:1 #, c-format msgid "You've not selected any font" msgstr "Ühtegi fonti ei ole valitud!" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Valige sobiv keel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "Printeri mudeli valik" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Partitsiooni %s tüübi muutmisel hävivad kõik seal olnud andmed" #: ../../harddrake/data.pm:1 #, c-format msgid "ISDN adapters" msgstr "ISDN kaardid" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d sekundit" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Pange palun tühi flopi seadmesse %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "Sisestama peab sobiva URI!" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "Leiti \"%s\" liides, kas soovite seda kasutada?" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Liidese ja DHCP serveri ümberseadistamine" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "Heliseadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "Fototestlehekülg" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "Partitsioneerin ise" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "Sisestage printeri nimi ja kommentaar" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Teie süsteemiga on ühendatud\n" "\n" "%s%s\n" "printerid" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "Winmodemit Teie süsteemis küll ei ole" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "tüüp: %s" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Slovaki (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" "Siia saab kirjutada komadega eraldatult kohalikud kasutajad või nende e-" "posti aadressid, kellele/kuhu antakse teada varunduse tulemustest. Selleks " "läheb vaja toimivat meiliedastusagenti." #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "Helikaarti ei leitud!" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Hiire port" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "Ebaturvaliste kontode kontroll" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Muutuste täielikuks jõustamiseks tuleb kuvahaldur taaskäivitada.\n" "(käsurealt: service dm restart)" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "FTP server" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "Uganda" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "%s fontide teisendamine" #: ../../standalone/harddrake2:1 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "siinitüüp, millega hiir on ühendatud" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "Siin näidatakse mitmeid Teie masinat puudutavaid parameetreid. Sõltuvalt\n" "riistvarast võite siin näha kõiki või osa järgmistest kirjetest. Iga kirje\n" "juures on ära toodud elemendid, mida on võimalik seadistada, ning Teie " "masinal\n" "praegu kehtiv seadistus. Selle muutmiseks vajutage nupule \"%s\".\n" "\n" " * \"%s\": võimalus kontrollida klaviatuuritabeli seadistusi\n" "ja neid vajaduse korral muuta.\n" "\n" " * \"%s\": võimalus kontrollida oma riigi valikut. Kui Te ei asu\n" "vaikimisi määratud maal, vajutage nuppu \"%s\" ja valige uus\n" "riik. Kui Teie riiki ei ole ilmuvas nimekirjas, vajutage nupule\n" "\"%s\", mis avab riikide täisnimekirja.\n" "\n" " * \"%s\": DrakX arvab vaikimisi ajavööndi ära valitud keele põhjal. Kuid\n" "nagu klaviatuuri puhul, võib ka siin ette tulla, et Te ei viibi näiteks " "maal,\n" "millele valitud keel vastab. Sellisel juhul tuleks klõpsata nupul \"%s\",\n" "et seada kell selle ajavööndi ajale, kus Te parajasti viibite.\n" "\n" " * \"%s\": võimalus kontrollida hiire seadistusi ja neid vajadusel muuta.\n" "\n" " * \"%s\": klõps nupul \"%s\" avab printeri seadistamise nõustaja.\n" "Seda, kuidas uut printerit seadistada, vaadake lähemalt käivitusjuhiste " "vastavast\n" "peatükist. Siin nähtav on sarnane paigaldusajal nähtuga.\n" "\n" " * \"%s\": kui süsteemis leiti helikaart, näidatakse seda.\n" "Kui märkate, et siintoodud helikaart pole see, mis tegelikult on\n" "süsteemi paigaldatud, vajutage nuppu ja valige sobiv juhtprogramm.\n" "\n" " * \"%s\": vaikimisi määrab DrakX Teie graafilise liidese\n" "kuvatiheduseks \"800x600\" või \"1024x768\". Kui see Teile ei sobi,\n" "vajutage nupule \"%s\" ja valige mõni muu võimalus.\n" "\n" " * \"%s\": kui süsteemis leiti TV-kaart, näidatakse seda.\n" "Kui Teil on TV-kaart, aga seda ei leitud, vajutage nupule \"%s\"\n" "ning püüdke see käsitsi määrata.\n" "\n" " * \"%s\": kui süsteemis leiti ISDN-kaart, näidatakse seda.\n" "Nupule \"%s\" vajutades saab muuta sellega seonduvaid parameetreid.\n" "\n" " * \"%s\": Kui soovite kohe seadistada juurdepääsu Internetti või " "kohtvõrku,\n" "saate seda teha siin nupule vajutades.\n" "\n" " * \"%s\": see pakub võimaluse määrata ümber eelmisel sammul ()\n" "paika pandud turvatase.\n" "\n" " * \"%s\": kui kavatsete oma masina Internetti ühendada, kuluks\n" "ära enda kaitsmine rünnakute eest tulemüüri paikapanemisega. Vaadake\n" "üksikasju, kuidas tulemüüri seadistada, käivitusjuhiste vastavast\n" "peatükist.\n" "\n" " * \"%s\": kui soovite muuta alglaaduri seadistusi, vajutage\n" "sellele nupule. See on mõeldud siiski vaid kogenud kasutajatele.\n" "\n" " * \"%s\": saate täpselt kontrollida, millised teenused Teie\n" "masinal töötavad. Kui kavatsete kasutada oma masinat serverina, kuluks\n" "ära seadistused üle vaadata." #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Komoorid" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "Mai" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "Yaboot resiim" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Tavaline 3 nupuga hiir" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "USA (kaabel)" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "LiLo taaskäivitamine ebaõnnestus!\n" "Käivitage \"lilo\" administraatorina käsurealt LiLo teema paigaldamise " "lõpetamiseks." #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "Muu andmekandja, millelt taastada" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "Tarkvarahaldur" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "Uuestisaatmine" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "CD on kohal - jätka" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "KB" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "Kohtvõrk ja Internet" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Leedu \"foneetiline\" QWERTY" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "Võrgu alglaadefailid" #: ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "Skännerite jagamine" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Plug'n Play test ebaõnnestus. Palun valige monitor täpsemalt" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "Tuvasta USB mälupulk uuesti" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "Teenused ja deemonid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "Kaugarvuti nimi puudub!" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "koos /usr-ga" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "Võrk" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "Microsoft Windowsi masinatega ühendatud printerite automaattuvastus" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Salasõna on liiga lihtne" #: ../../security/l10n.pm:1 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig allumine msec-i reeglitele" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Slovaki (QWERTZ)" #: ../advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" "Programmeerimine erinevates keeltes, näiteks Perl, Python, C ja C++, pole " "kunagi varem olnud nii hõlpus - seda tänu GNU gcc 3-le ja parimatele vaba " "tarkvara arenduskeskkondadele." #: ../../standalone/drakbackup:1 #, c-format msgid "No devices found" msgstr "Ühtegi seadet ei leitud!" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Tõeliselt minimaalne (eriti just ilma urpmi-ta)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "Deemoni kasutamine" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Autentimisviis" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Lisa printer StarOffice/OpenOffice.org/GIMP-ile" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "Täiendavad CUPS serverid: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Valige loendist üks automaatselt tuvastatud printeritest või kirjutage " "sisendiväljale masinanimi või IP ja kui teate, ka pordi number (vaikimisi on " "see 9100)." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "Kuhu soovite haakida %s?" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "Alžeeria" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "Taastamine võrgust" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "tar ja bzip2 kasutamine (tar ja gzip asemel)" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "Initrd suurus" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" "Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n" "kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n" "kõige enam vastab." #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tvarukoopiad tar- ja gzip-vormingus\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Set as default" msgstr "Määra vaikeprinteriks" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 MB" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on this machine" msgstr "Seadistatud sellel masinal" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "Mõlemad Ctrl-klahvid korraga" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr " --help - näitab seda abiteadet \n" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[VÕTI]...\n" " --no-confirmation ei küsita esimest kinnitust MandrakeUpdate " "resiimis\n" " -no-verify-rpm pakettide signatuure ei kontrollita\n" " --changelog-first näitab kirjelduse aknas enne faililoendit " "muudatuste logi\n" " -merge-all-rpmnew proovib liita kõik leitud failid .rpmnew/.rpmsave" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "Vaikeprinteri seadmine..." #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "Liides %s (kasutab moodulit %s)" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "Eelvaatluse tekitamine ..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Sagedus peab sisaldama sufiksit k, M või G (näiteks \"2.46G\" - 2,46 GHz " "sagedusel), või lisage piisavalt nulle." #: ../../standalone/draksec:1 #, c-format msgid "ignore" msgstr "ignoreeri" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "X-i ühenduste lubamine/keelamine:\n" "\n" "- KÕIK (kõik ühendused on lubatud),\n" "\n" "- KOHALIK (ainult kohalikud ühendused),\n" "\n" "- MITTE KEEGI (ühendusi ei lubata)." #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", mitme funktsiooniga seade paralleelpordis #%s" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "jadapordi" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Gruusia (\"ladina\" asetus)" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" "Hankige parimad kaubad ja teenused Mandrake Linuxi strateegilistelt " "partneritelt" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Nüüd võite määrata oma parameetrid moodulile %s.\n" "Pange tähele, et iga aadress tuleb sisestada prefiksiga 0x, nt '0x123'" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "Keenia" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Kasutage enne \"Lahuta\"" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "Paketi \"mtools\" paigaldamine..." #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "Teil peab olema juurpartitsioon" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "esimene samm loomine" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "Mõlemad Shift-klahvid korraga" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" " --id - avab html abilehekülje, mis viitab id_label'ile\n" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "Valige skänneri mudel" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "IPv4 võltsveateadete lubamine/keelamine" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR, uus põlvkond" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "Drakbackupi seadistused" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "Salvesta kui..." #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "Põhja-Korea" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Seda liidest ei ole veel seadistatud.\n" "Käivitage peaaknas seadistamise nõustaja" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "Süsteemi seadistused" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "Vaikimisi sisenemine" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "Domeeni administraatori parool" #: ../advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" "Arvuti saab kohandada just oma vajadustele tänu Mandrake Linuxi kasutajatele " "pakutavatele 11 igati seadistatavale kasutajaliidesele: KDE 3.1, GNOME 2.2, " "WindowMaker..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "Printeri seadistamine..." #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Andmepidevuse tagamiseks pärast partitsiooni(de) suuruse muutmist \n" "kontrollitakse järgmisel Windows(TM) alglaadimisel failisüsteemi" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "MB" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "Kui on 'jah', kontrollitakse veidi rpm andmebaasi." #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "Neitsisaared (Briti)" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "Bermuda" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "kui olete kindel, klõpsake siia." #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Seadistustefaili ei leitud, \n" "klõpsake palun nupul 'Nõustaja' või 'Muud'." #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Ülal on toodud kõik Teie kõvakettal olemasolevad Linuxi partitsioonid\n" "Vaikimisi on need enamasti üsna mõistlikud. Kui teete nendes muutusi,\n" "pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga väikeste\n" "partitsioonide puhul võib tekkida raskusi piisava hulga tarkvara " "paigaldamisel.\n" "Kasutajate jaoks on sageli mõistlik luua eraldi \"/home\" partitsioon.\n" "(Seda mõistagi juhul, kui tegemist on enam kui ühe Linuxi partitsiooniga).\n" "\n" "Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n" "\n" "\"Nimi\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n" "numbrist (näiteks \"hda1\").\n" "\n" "Kõvaketta tüüp on \"hd\", kui on tegemist IDE kettaga, ning \"sd\", kui on\n" "tegemist SCSI kettaga.\n" "\n" "Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE ketastel:\n" "\n" " * \"a\" - esmase IDE kontrolleri ülem,\n" "\n" " * \"b\" - esmase IDE kontrolleri allutatu,\n" "\n" " * \"c\" - teisese IDE kontrolleri ülem,\n" "\n" " * \"d\" - teisese IDE kontrolleri allutatu.\n" "\n" "SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "Eemalda" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Lesotho" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "utopia 25" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "Töö toru kaudu käsuks" #: ../../../move/move.pm:1 #, c-format msgid "Remove system config files" msgstr "Eemaldada süsteemsed seadistustefailid" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Cote d'Ivoire" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "uus dünaamiline seadmenimi, mille genereerib kerneli devfs" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Jah" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Millist protokolli soovite kasutada?" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "Taastamise edenemine" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "Eesti" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Partitsioonitabelis on miskipärast tühi koht, aga see ei ole kasutatav.\n" "Ainuke lahendus on nihutada primaarset partitsiooni, et \"auk\" satuks " "laiendatud partitsioonide kõrvale." #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" "Valige palun masin, mille jaoks soovite siinseid skännereid välja jagada:" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "Kanal" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Lisa" #: ../../standalone/drakbackup:1 #, c-format msgid " Error while sending mail. \n" msgstr " Viga meili saatmisel. \n" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Klaviatuur" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Sisestage CD nimega %s\n" " CD-seadmesse haakepunktis /mnt/cdrom" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "Kiirus peab sisaldama sufiksit k, M või G (näiteks \"11M\"), või lisage " "piisavalt nulle." #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "Valige ühendus, mida seadistada" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "Palun oodake, sätin turvataseme..." #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Seadistame võrgukaardi %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "aktiveeritud" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Palun valige, millist võrguliidest soovite dhcp serveri jaoks kasutada" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Otsin uuendatavaid pakette..." #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Haakepunkt:" #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "kõigi fontide analüüs" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid direct root login." msgstr "Administraatori vahetu sisselogimise lubamine/keelamine" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "Üldlevi icmp echo aktsepteerimine/tagasilükkamine" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "X-iga" # #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "Mitme monitori seadistamine" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "Brauserit ei leitud! Palun paigaldage mõni" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Kas säilitada muudatused?\n" "Olemasolevad seadistused:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS ei ole kasutatav alla 32MB partitsioonidel" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Protokoll rwho laseb üle võrgu saada informatsiooni\n" "süsteemi kasutajate kohta. Ettevaatust!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Domeeninimi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "Printerite jagamine" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "Libsafe lubamine/keelamine, kui see süsteemist leitakse" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "Saadaolevad printerid" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "EI" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Tühi" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "teksti laius" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Kuhu soovite haakida seadme %s?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "Rendiaeg vaikimisi (sekundites)" #: ../../network/netconnect.pm:1 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Nüüd on aeg seadistada %s ühendus.\n" "\n" "\n" "Vajutage jätkamiseks \"%s\"." #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "Liides \"%s\"" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "Baasdokumentatsiooniga (soovitatav!)" #: ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "1 nupuga" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "%d tundmatut printerit on Teie süsteemi otse ühendatud" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Test" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "Korea" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Teie valik? (vaikimisi '%s'%s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "Toorprinter" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "CPU ametlik tootja" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "Kasutu ilma terminaliserverita" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "Tootja" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "Liides %s" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Hiire seadmine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Valige haakepunktid" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "Olgu" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "Jugoslaavia (ladina)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Paigaldan" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan ratta emuleerimisega" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "Userdrake käivitamine" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "Kas see on paigaldus või uuendamine?" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "ISDN kaart" #: ../advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" "Oma teadmiste jagamiseks ning Linuxi vahendite loomiseks võite ühineda " "diskussioonirühmadega, mida leiab meie \"kogukonna\" veebilehekülgedel" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-kõvaketas.\n" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" "Seda sammu on vaja ainult siis, kui masinas leiti vana\n" "GNU/Linuxi partitsioon.\n" "\n" "DrakX soovib nüüd teada, kas tahate paigaldada uue süsteemi või uuendada\n" "olemasolevat Mandrake Linuxi süsteemi:\n" "\n" " * \"%s\": üldiselt pühib see vana süsteemi täielikult minema. Kui\n" "soovite muuta praeguseid partitsioone või failisüsteemi, siis võiks seda " "võimalust\n" "kasutada. Sõltuvalt kettajagamise viisist on võimalik ka mõningaid andmeid\n" "ülekirjutamise eest päästa.\n" "\n" " * \"%s\": see paigaldusviis võimaldab uuendada praegu olemasolevasse\n" "Mandrake Linuxi süsteemi paigaldatud pakette. Kettajagamisskeemi ega " "kasutajate\n" "andmeid ei muudeta. Enamik seadistussamme on kasutatavad sarnaselt " "tavapärasele\n" "paigaldusele.\n" "\n" "Võimalus \"Uuendus\" peaks toimima edukalt Mandrake Linuxi süsteemides\n" "alates versioonist 8.1. Uuenduse proovimist varasemate versioonide peal\n" "me siiski ei soovita." #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "\n" " Autoriõigus (C) 2001-2002: MandrakeSoft \n" " DUPONT Sebastien (esialgne versioon)\n" " CHAUMETTE Damien \n" "\n" " Käesolev rakendus on vaba tarkvara. Te võite seda edasi levitada\n" " ja/või muuta vastavalt GNU Üldise Avaliku Litsentsi tingimustele, nagu\n" " need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n" " või (vastavalt Teie valikule) ükskõik milline hilisem versioon.\n" "\n" " Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n" " ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n" " KVALITEEDI GARANTIITA või SOBIVUSELE TEATUD KINDLAKS\n" " EESMÄRGIKS. Üksikasjade suhtes vaadake GNU Üldist Avalikku Litsentsi.\n" "\n" " Te peaks olema saanud GNU Üldise Avaliku Litsentsi koopia koos selle\n" " rakendusega; kui ei, siis võtke ühendust Vaba Tarkvara Fondiga aadressil:\n" " Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n" " MA 02111-1307, USA.\n" "\n" " Täname:\n" " - pfm2afm: \n" "\t autor: Ken Borgendale:\n" "\t teisendab Windowsi .pfm-faili .afm-failiks (Adobe fondimeetrika)\n" " - type1inst:\n" "\t autor: James Macnicol: \n" "\t type1inst tekitab failid fonts.dir, fonts.scale ja Fontmap.\n" " - ttf2pt1: \n" "\t autorid: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergei Babkin \n" " teisendab ttf-fondifailid afm- ja pfb-fontideks\n" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "CUPS printserver" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "Printeri \"%s\" eemaldamine StarOffice/OpenOffice.org/GIMP-ilt ebaõnnestus." #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "kui mitte, siis siia." #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "DHCP masinanimi" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "Maksimaalne rendiaeg (sekundites)" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Millisesse jadaporti on Teie hiir ühendatud?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "Kas kõik oli korras?" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "Failisüsteem haagitakse ainult lugemisõigusega." #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Vähene" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "Kontrolli tulemustest teatatakse e-postiga" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Grenada" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "DHCP vahemiku algus" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Ebaturvaline" #: ../../network/drakfirewall.pm:1 #, c-format msgid "SSH server" msgstr "SSH server" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s sektorit" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Ei" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Guadeloupe" #: ../../keyboard.pm:1 #, c-format msgid "Kannada" msgstr "Kannada" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "ei suutnud fonte leida.\n" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Ekraaniuuendussagedus" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Järgmine samm: '%s'\n" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "Niger" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "%s eemaldamine..." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "Printer puudub" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "hoiatuse seadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "NetWare printeri seadistused" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s käivituslogo (%s) eelvaatlus" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "Veebruar" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "Üldine" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* on olemas" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Tavakasutaja" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "Võrguseadistused (%d liidest)" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "Aprill" #: ../../standalone/drakconnect:1 #, c-format msgid "Deactivate now" msgstr "Peata nüüd" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "Puudub kohustuslik pakett %s" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Filipiinid" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "Olgu" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "drakTermServi ülevaade" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Trükijärjekorra nimi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "Kas soovite kasutada aboot-i?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Valgevene" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ toetab ainult kohalikke printereid, võrguprintereid (LPD) ning Socket/" "TCP printereid.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "Liiguta failid uuele partitsioonile" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Lisage siia CUPS serverid, mille printereid soovite kasutada. Seda tuleb " "teha ainult siis, kui serverid ei saada oma printeri(te) infot üldleviga " "kohtvõrku." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printeri seadistamise nõustaja\n" "\n" "Nõustaja aitab Teil paigaldada printeri(d), mis on ühendatud selle " "arvutiga.\n" "\n" "Kui teil on printer(eid), mis on ühendatud selle masinaga, ühendage palun " "see/need arvutiga ja lülitage sisse, et seda/neid saaks automaatselt " "tuvastada.\n" "\n" "Kui olete valmis, vajutage \"Järgmine\", või \"Katkesta\", kui Te ei soovi " "praegu printeri(te) seadistamisega tegelda." #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "Taastamine kataloogist" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "partitsiooni %s haakimine kataloogis %s ebaõnnestus" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "LiLo ekraan" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "LiLo graafikaresiimis" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Oletan" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "See pakett on juba paigaldatud" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", printer \"%s\" SMB/Windows serveril \"%s\"" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Ikkagi edasi?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Otsin saadaolevaid pakette ja loon uuesti rpm andmebaasi..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " DrakBackupi raport \n" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "See ei paista küll olevat kirjutatav andmekandja!" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Määrata parameetrid" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "Uued kasutajate failid:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Andma peab kas serveri nime või serveri IP!" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n" "sõltumata tavalisest alglaadijast. See võib abiks olla, kui Te ei soovi\n" "SILO-t kõvakettale kirjutada või mõni muu operatsioonisüsteem SILO\n" "ära kustutab või ei õnnestu SILO-t Teie riistvara peal kasutada.\n" "Alglaadimisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n" "failisüsteemiga peaks mingi õnnetus juhtuma.\n" "Hoidke end ja Teid hoiab ka Jumal!\n" "\n" "Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n" "\"Olgu\"." #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Te ei saa haakepunkti %s jaoks kasutada krüptitud failisüsteemi" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "Salasõna puhvri suuruse määramine vältimaks selle taaskasutamist" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Norfolki saar" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "Teema paigaldamine ebaõnnestus!" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "Pole midagi teha" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Kasuta loopback-ina" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "Mandrake veateate abivahend" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "Rakenda filter" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "pppoe" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "Failide liigutamine uuele partitsioonile" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "Edasijõudnud" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "Kanna üle" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (Rootsi)" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "Afganistan" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "Rohkem valikuid" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "Tar-failid kustutatakse kõvakettalt pärast varundamist muule andmekandjale" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Burundi" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "Cron on UNIXi süsteemide standardvahend kasutaja programmide perioodiliseks\n" "käivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n" "mugavust tõstvaid omadusi. Soovitatav süsteemile, mis töötab 24h." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "Lisa klient -->" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Lugege hoolega!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "RW" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Palun märkige ära\n" "oma telesüsteem ja riik" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Port" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "Ei (ainult eksperdile)" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "Kernelit pole valitud!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Enter laeb Teie valiku, 'e' laseb muuta" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "Set-GID" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "Krüptovõtmed ei klapi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "Mitmeseansilise CD korral puhastatakse CD-RW ainult esimesel seansil. " "Märkimatajätmisel puhastatakse CD-RW enne iga varundamist." #: ../../printer/main.pm:1 #, c-format msgid "USB printer" msgstr "USB printer" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "Parempoolne \"Windows\"-klahv" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "Kui on 'jah', kontrollitakse tühja salasõna /etc/shadow-s." #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" "Enne jätkamist lugege hoolikalt läbi litsentsileping. See kehtib kogu " "Mandrake\n" "Linuxi distributsiooni kohta. Kui Te kõigi selle tingimustega nõus olete,\n" "märkige ära kast \"%s\". Kui Teile aga miski ei meeldi, siis lülitage\n" "lihtsalt arvuti välja." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "See on loend praegusel printeril kasutamiskõlblike trükkimisvalikutega:\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Kuvatihedused" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "drakfirewalli seadistaja\n" "\n" "Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n" "Kui vajate võimsat tulemüüri, vaadake palun\n" "spetsiaalset MandrakeSecurity Firewall distributsiooni." #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Palun sisestage sellele masinale ligipääsuks oma kasutajanimi, parool ja " "domeeni nimi." #: ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "Eemalda valitud masin" #: ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "Võrguseadistused" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jaz drives" msgstr "/_JAZ ketaste automaattuvastus" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "Jagamiseta" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "Valitud reegel üks tase allapoole" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "TB" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "SAATUSLIK" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "Värskendab nimekirja" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - Kliendi failid %s:\n" " \t\tClusterNFS abil võivad igal kettata tööjaamal olla oma " "unikaalsed seadetefailid\n" " \t\tserveri juurfailisüsteemis. Kliendi kohalikku riistvara " "seadistamist lubades aitab drakTermServ neid luua." #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "DHCP server võimaldab teistel arvutitel sooritada alglaadimise PXE " "vahendusel antud aadressivahemikus.\n" "\n" "Võrguaadress on %s, võrgumask %s.\n" "\n" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "Kustuta" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Teie arvutis on võimalik käivitada X juba alglaadimisel.\n" "Kas soovite nii teha?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "Ketta loomine" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "%s ühenduse katkestamine" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Olek:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "HTTP vahendaja" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "SSH server" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-võrk rsync vahendusel.\n" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "Euroopa protokoll" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", printer \"%s\" serveril \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "Arvestage, et praegu kasutavad kõvaketast ka kõik 'võrgu'-andmekandjad." #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakboot:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "Viga" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "\"su\" lubamine" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "Austraalia" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "palun oodake, käib ttmkdir..." #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Seadista ainult kaart \"%s\"%s" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "Tase" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "Trükkimissüsteemi muutmine" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Süsteemis on võimalik kasutada mitut monitori.\n" "Mida Te soovite teha?" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "haakimine ebaõnnestus: " #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Teenuste seadistused" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "Üldlevi aadress:" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "GNU/Linuxi kernel peab alglaadimise ajal ajaarvesti lähtestamiseks sooritama " "kalkulatsioonisilmuse. Selle tulemus salvestatakse bogomipsides, mis " "kujutab endast omamoodi CPU \"jõudlustesti\"." #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Laadefail" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "Kaughaldus" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "Printeri \"%s\" lisamine StarOffice/OpenOffice.org/GIMP-ile ebaõnnestus." #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "2.2 kernelitel pole enam PCMCIA tuge. Kasutage palun 2.4 kernelit." #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "Kõigi valimine" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Tavaline UNIXi trükkimissüsteem" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "Webmin teenus" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "seade" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save to:" msgstr "Kataloog, kuhu salvestada:" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "Kreeka" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Kõik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Millist trükkimissüsteemi (spuulerit) soovite kasutada?" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "Juuli" #: ../../printer/main.pm:1 #, c-format msgid "Prints into %s" msgstr "Trükkimine masinal %s" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "Tekkis mingi viga" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Selle paketi peaks uuendama.\n" "Olete kindel, et Te ei vali seda?" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Tamili (kirjutusmasin)" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "Salasõna kasutamine kasutajate autentimiseks" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "Kasutajate nimekirja lubamine/keelamine kuvahalduritel (kdm ja gdm)" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "käsitsi" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "Otsitava faili nimi:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Printeri tootja, mudel, draiver" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Andmekandja puudub seadmes %s või on kirjutuskaitsega.\n" "Sisestage palun andmekandja." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Kataloogis %s on juba andmed\n" "(%s)" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "NetWare printserver" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Anna mälu suurus megabaitides" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "Reede" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet complete." msgstr "Internetiühendus on katkestatud." #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Pärisnimi" #: ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "tehtud" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Palun tühistage valik või eemaldage järgmisel korral" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "Veel kõrgem" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Valige partitsioonid, mida soovite vormindada" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Teie masinal ei leitud TV-kaarti. Kontrollige palun, et Linuxi toega video/" "TV-kaart on korrektselt ühendatud.\n" "\n" "\n" "Meie riistvara andmebaasi saate külastada aadressil:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "%s leidmine %s -l ebaõnnestus" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Jaapani 106 klahviga" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" "Pakettide paigaldamine, mis on vajalikud Teie skänneri(te) jagamiseks, ei " "õnnestunud." #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "Selleks kulub päris mitu minutit." #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "Juuni" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "Skännerite kasutamine kaugmasinatel" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "Kustuta valitud reegel" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Ligipääs printeritele CUPS printserveril" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "Pange flopi seadmesse %s" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Maldiivid" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "kompaktne" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 minut" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: fat" msgstr "tüüp: paks (fat)" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "on channel %d id %d\n" msgstr "kanalil %d id %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr ", mitme funktsiooniga seade" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "Laos" #: ../advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" "Mandrake Linux 9.2 pakub Teile Mandrake juhtimiskeskust - võimsat vahendit " "oma arvuti kohandamiseks, et sellest viimane välja võtta. Seadistada ja " "meelepäraseks muuta saab turvataset, välisseadmeid (monitor, hiir, " "klaviatuur...), Internetiühendust ja veel palju-palju muud!" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "Võrgukaardi mitte-eelisoleku kontrolli lubamine/keelamine" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "Sobivat FAT-partitsiooni ei leitud (ei ole piisavalt ruumi)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "Üles" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "Tulemüür" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "Piirkond:" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA kontrollerid" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "Kogu failisüsteemi I/O sooritatakse sünkroonselt." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Printserver" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "Kohandatud seadistused" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Andke palun paigalduslaadefaili asukoht.\n" "\n" "Kui Teil säherdust kataloogi ei ole, kopeerige palun CD või DVD sisu.\n" "\n" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre ja Miquelon" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "September" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "Käivituslogo teema salvestamine..." #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "Portugal" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "On Teil veel kaarte?" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr ", trükkimine masinal %s" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "Omista masinanimi DHCP aadressist" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Ekspert > Tavakasutaja" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Tavaline" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Cylinder %d to %d\n" msgstr "Silindrid %d kuni %d\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "SIIA TULEB TEIE TEKST" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "Uus profiil..." #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "MITTE KEEGI" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "Millisele kettale soovite seda ümber paigutada?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "Logo näitamine konsoolil" #: ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "Windowsi domeen" #: ../../keyboard.pm:1 #, c-format msgid "Saami (norwegian)" msgstr "Saami (Norra)" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "Liides %s (võrgus %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "INFO" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "Wallis ja Futuna" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Esmalt tuleb luua /etc/dhcpd.conf!" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "FPU olemasolu" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Selle teenuse kohta\n" "ei oska lisainfot anda." #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Ei leitud ühtegi skännerit, mida süsteem saaks kasutada.\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "Loo ainus võrgukaart -->" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Marshalli saared" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Kas see on sobiv?" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Administraatori salasõna" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "Loo kõik kernelid -->" #: ../../standalone/drakbackup:1 #, c-format msgid "DVDRAM device" msgstr "DVDRAM seade" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "Kui on 'jah', teatatakse omanikuta failidest." #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Saaleala ei ole määratud.\n" "\n" "Kas ikkagi jätkata?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "Versioon: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "Serveri IP puudub!" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "Suriname" #: ../../network/adsl.pm:1 #, c-format msgid "Use a floppy" msgstr "Flopi kasutamine" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "ACPI lubamine" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "Kirjutamisõiguse andmine tavakasutajale" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "Graafiline keskkond" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "Ära tee midagi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "Kustuta klient" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Failisüsteemi tüüp: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "Võrgu käivitamine..." #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "Vietnam" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "/Välja_de kirjeldus" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "Turvalisus, nagu Teile meeldib" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" "\n" "\n" " Täname:\n" "\t- LTSP projekti http://www.ltsp.org\n" "\t- Michael Browni \n" "\n" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Abi" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Võrguseadmete mitte-eelisresiimis oleku kontroll" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Teie telefoninumber" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Kui palju ruumi jätate Windowsi jaoks?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Testlehekülg on saadetud printerile.\n" "Nüüd võib minna natuke aega, enne kui printer alustab.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "Kasutajatunnuse nõudmine" #: ../../standalone/drakfloppy:1 #, c-format msgid "Device" msgstr "Seade" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Tavaliselt valib DrakX klaviatuuri Teie eest juba ära (sõltuvalt valitud\n" "keelest). Kuid see võib tekitada olukorra, kus Teil ikkagi pole just see\n" "klaviatuur, mida soovite: kui olete näiteks inglise keelt kõnelev\n" "šveitslane, võite siiski soovida Šveitsi asetusega klaviatuuri. Teine kohe\n" "pähe tulev juhtum on inglise keele kõneleja Quebecis. Mõlemal juhul on\n" "mõtet naasta paigalduse selle sammu juurde ja valida loendist vajalik\n" "klaviatuur.\n" "\n" "Klõpsake nupul \"%s\", mis näitab kõiki toetatud klaviatuure.\n" "\n" "Kui valite mitte-ladina tähestikuga klaviatuuri, palutakse Teil järgmises\n" "dialoogis valida klahv või klahvikombinatsioon, mis vahetab ladina ja\n" "mitte-ladina asetusega klaviatuuri." #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) printeri seadistused" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "URI: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "Kehtivat nimekirja on muudetud, kirjutan seadistustefaili uuesti." #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "mkinitrd lisaargumendid" #: ../advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" "Lehitsege veebi Mozilla või Konqueroriga, lugege e-posti Evolutioni või " "KMailiga, looge oma dokumendid OpenOffice.org abil." #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "Protokoll ülejäänud maailma tarbeks" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "Trüki testlehekülg(i)" #: ../../standalone/drakconnect:1 #, c-format msgid "Activate now" msgstr "Aktiveeri nüüd" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 MB või rohkem" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Valige palun testleheküljed, mida trükkida.\n" "Märkus: fototesti trükkimine võib võtta üsna kaua aega ning liiga vähese " "mäluga laserprinteritel ei pruugi see üldse õnnestuda. Enamasti peaks " "piisama tavalise testlehekülje trükkimisest." #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "Valige palun seade, kuhu %s on ühendatud" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Vormindamata\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "Perioodiline kontroll" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "PXE serveri seadistamine" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "Varundatakse süsteemsed failid, mis on loodud enne:" #: ../../security/level.pm:1 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "See on sobilik turvatase arvutile, mis ühendatakse Internetti kui klient." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Esimene flopiseade" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "/Fail/_Välju" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Valige uus suurus" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "Andmekandja klass" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "Muudatuste rakendamiseks tuleb end uuesti sisse logida" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "%s on Scannerdrake praegusele versioonile tundmatu." #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "Fääri saared" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "XFS taaskäivitamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "Lisa masin/võrk" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdraket praegu ei käivitata." #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "Mudeli nimi" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "Albaania" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Briti India ookeani ala" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "Tavakasutus" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "CD-R/DVD-R ei ole seadmes!" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "Printeri ühendusviis" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "Teie süsteemis ei ole võrgukaarti!" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "Võrk %s" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "Malajalami" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "Võti %s väljub piiridest!" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "%s ühenduse loomine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "CUPSi taaskäivitamine..." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Trükkimine/skaneerimine/fotokaardid seadmel \"%s\"" #: ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "Jätka ilma USB mälupulgata" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Haakepunkt %s on määratud topelt" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "Kui on 'jah', käivitatakse chkrootkit kontroll." #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Internetiühenduse seadistused" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "Tundmatu|Tavaline" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "On tõenäoline, et praegu, kui Te paigaldate Mandrake Linuxit, on mõned\n" "paketid jõudnud pärast väljalaset juba uuenduskuuri üle elada. Mõnes on ära\n" "parandatud paar väiksemat viga, mõnes turvaprobleemid. Et võiksite neist\n" "uuendustest tulu lõigata, on Teil nüüd võimalik need Internetist alla " "laadida.\n" "Klõpsake \"%s\", kui Teie internetiühendus töötab, või \"%s\", kui " "eelistate\n" "pakette uuendada millalgi hiljem.\n" "\n" "Kui valite \"%s\", näidatakse Teile loendit kohtadega, kust uuendusi " "tõmmata\n" "saab. Valige endale lähim paik. Seejärel ilmub paketivaliku puu. Vaadake " "see\n" "üle ning vajutage \"%s\", kui soovite valitud paketi(d) alla laadida ja\n" "paigaldada, või \"%s\", kui Te ei soovi seda teha." #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Myanmar" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Välju" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Paiguta ise" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Blokkide kontroll?" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "Muud multimeediaseadmed" #: ../../standalone/harddrake2:1 #, c-format msgid "burner" msgstr "CD-kirjutaja" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "Vea kirjeldus/süsteemi info" #: ../../standalone/drakbackup:1 #, c-format msgid " (Default is all users)" msgstr "(Vaikimisi tähendab kõiki kasutajaid)" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "Ainult sellel masinal" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Printeri seadistamise nõustaja\n" "\n" "Nõustaja aitab Teil paigaldada printeri(d), mis on ühendatud selle " "arvutiga.\n" "\n" "Kui teil on printer(eid), mis on ühendatud selle masinaga, ühendage palun " "see/need arvutiga ja lülitage sisse, et seda/neid saaks automaatselt " "tuvastada.\n" "\n" "Kui olete valmis, vajutage \"Järgmine\", või \"Katkesta\", kui Te ei soovi " "praegu printeri(te) seadistamisega tegelda." #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "NIS autentimine" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Võti ``Piira käsurea suvandeid'' ei ole kasutatav ilma salasõnata" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Internetiühenduse jagamine töötab" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Araabia Ühendemiraadid" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "Kaardi IO_0" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "Kohalik seadistus on keelatud" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Tai" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "Kaardi IO_1" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "Otsi:" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Kasahstan" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "Ruuterid:" #: ../../standalone/drakperm:1 #, c-format msgid "Write" msgstr "Kirjutada" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "Näita kõiki saadaolevaid CUPS printserveri printereid" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linuxi paigaldamine %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "Tundmatu juhtprogramm" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Tai" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Bouvet' saar" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "DialUp parameetrid" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "Kui porti ei ole määratud, kasutatakse vaikimisi porti 631." #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - Kliendi süsteemsed seadistustefailid:\n" " \tClusterNFS abil võivad igal kettata tööjaamal olla oma unikaalsed " "seadistustefailid\n" " \tserveri juurfailisüsteemis. Kliendi kohalikku riistvara " "seadistamist lubades\n" " \tvõimaldab drakTermServ kohandada selliseid faile, nagu /etc/" "modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard.\n" "\n" " Märkus: Kliendi kohaliku riistvara seadistamine lubamine võimaldab " "administraatorina terminaliserverile \n" " sisse logida igal klientmasinal, millel see võimalus on lubatud. " "Kohaliku seadistuse saab \n" " tagasi muuta, hankides seadistustefailid uuesti, kui klientmasin on " "seadistatud." #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Vahetage CD-ROM!\n" "\n" "Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage .\n" "Kui teil säherdust ei ole, vajutage ." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Poola" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-võrk webdavi vahendusel.\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on a parallel port" msgstr ", mitme funktsiooniga seade paralleelpordis" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Ühtki võrgukaarti ei suudetud tuvastada. Palun kasutage selleks riistvara " "seadistajat." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Võrgumask" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "Kõvakettaid ei leitud" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 nupuga" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC seeria" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "Millist ISDN ühendust kasutate?" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Pealdis" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Salvesta flopile" #: ../../security/l10n.pm:1 #, c-format msgid "Check open ports" msgstr "Avatud portide kontroll" #: ../../standalone/printerdrake:1 #, c-format msgid "Edit selected printer" msgstr "Valitud printeri muutmine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "Printeri automaattuvastus" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Milline on Teie ISDN kaart?" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n" "See täidab NFS serveri funktsioone ja seadistatakse failis /etc/exports." #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "Msec" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Pange tähele, et pealdis on muutunud:\n" "%s" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "Hõivepuhvrite arv:" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Teie valik? (0/1, vaikimisi '%s')" #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "Kõik värskelt loodud partitsioonid tuleb enne kasutamist vormindada\n" "ehk sinna tuleb luua failisüsteemid.\n" "\n" "Samuti võib vormindada varem olemas olnud partitsioonid, kui soovite\n" "seal leiduvad andmed ära kustutada.\n" "\n" "Pange tähele, et alati ei ole kõigi vanade partitsioonide vormindamine\n" "vajalik. Kindlasti tuleb vormindada partitsioonid, kus varem asus \"/\", \"/" "usr\"\n" "või \"/var\", aga kasutajate faile sisaldav \"/home\" võiks jääda alles.\n" "\n" "Olge partitsioonide valikul hoolas. Pärast vormindamist on kõik valitud\n" "partitsioonidel asunud andmed kustutatud ning neid ei ole võimalik " "taastada.\n" "\n" "Klõpsake \"%s\", kui olete vormindamiseks valmis.\n" "\n" "Klõpsake \"%s\", kui soovite valida oma uue Mandrake Linuxi süsteemi\n" "paigaldamiseks mõne muu partitsiooni.\n" "\n" "Klõpsake \"%s\", kui soovite valida partitsioone, millel kontrollitaks " "halbade\n" "blokkide olemasolu." #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Prantsuse" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Tšehhi (QWERTY)" #: ../../security/l10n.pm:1 #, c-format msgid "Allow X Window connections" msgstr "X Window ühenduste lubamine" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "Toimub tuvastamine.." #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "Võrguseade" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Kokkuvõte" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (paralleelpordid: /dev/lp0, /dev/lp1..., millele teistes süsteemides vastab " "LPT1:, LPT2:...; esimene USB printer: /dev/usb/lp0, teine USB printer: /dev/" "usb/lp1...)" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "Järgmine" #: ../../bootloader.pm:1 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Alglaadurit ei ole võimalik paigaldada partitsioonile %s\n" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Puerto Rico" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp/zeroconf)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Tere tulemast!\n" "\n" "Automaatpaigalduse parameetrid on näha vasakul" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "korrektseks töötamiseks on vajalik pakett 'ImageMagick'.\n" "Klõpsake \"Olgu\" paketi 'ImageMagick' paigaldamiseks\n" "või \"Katkesta\" väljumiseks." #: ../../network/drakfirewall.pm:1 #, c-format msgid "Telnet server" msgstr "Telneti server" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Leedu \"numbrireaga\" QWERTY" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Süsteemi uuendamiseks tuleb eemaldada järgmised paketid: %s\n" "\n" "\n" "Kas tõesti eemaldada need paketid?\n" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Anguilla" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "NIS domeen" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Antarktika" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Kasutaja failid.\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "Haakimise valikud" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Jamaica" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Toorseadmete seostamine blokkseadmetega\n" "(näiteks kõvaketta partitsioonid)\n" "selliste rakenduste, nagu Oracle või DVD mängijad tarbeks" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "Palun oodake, valmistun paigalduseks..." #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Tšehhi (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Võrgukaadi id tuvastus (kasulik sülearvutite puhul)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "Pordi number peab olema täisarv!" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "Esmalt tuleb valida pildifail!" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "Taastamine kõvakettalt" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Lisa LVMi" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "Nimeserver" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad ja Tobago" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD ja LPRng ei toeta IPP printereid.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Host name or IP." msgstr "Masinanimi või IP" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "/_Muuda" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "lihtne" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Kustuta kõik" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "Ära trüki" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Falklandi saared (Malviinid)" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "Võrgukaart %s: %s" #: ../../standalone/drakfloppy:1 #, c-format msgid "Boot disk creation" msgstr "Alglaadimisketta loomine" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "Esmaspäev" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "Tundmatu mudel" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "Kui on 'jah', kontrollitakse kõigi kirjutatavaid faile/katalooge." #: ../../help.pm:1 #, c-format msgid "authentication" msgstr "autentimisviis" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "Varunda nüüd!" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "/_Fail" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "Printeri eemaldamine StarOffice/OpenOffice.org/GIMP-ilt" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Käivitab paketifiltri Linuxi kerneliseeriale 2.2 ning loob\n" "tulemüüri, mis kaitseb Teie masinat rünnakute eest Internetist." #: ../../standalone/drakperm:1 #, c-format msgid "Editable" msgstr "Redigeeritav" #: ../../network/ethernet.pm:1 #, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "Millist DHCP klienti soovite kasutada? (vaikimisi on selleks 'dhcp-client')" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Tamili (ISCII)" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Mayotte" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "Shellikäskude puhvri suuruse määramine. -1 tähendab piiramatu." #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Kiirpaigaldusflopi loomine..." #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "Skännerite otsimine..." #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "Venemaa" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "Kõvaketta jagamine" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "võrgukaart(i) leiti üles" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "Syslog" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "Kataloogi ei õnnestunud luua!" #: ../advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" "Viige oma turvalisuse seadistamine täiuseni hõlpsasti kasutatava tarkvara " "abil, mis ühendab ülimalt tõhusaid komponente, näiteks tulemüür, virtuaalse " "eravõrgu (VPN) server ja klient, rünnakute avastamise süsteem ja " "võrguliikluse haldur." #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Ei ole piisavalt ruumi automaatpaigutuseks" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Juurkasutaja salasõna" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "IP võltsimiskaitse lubamine" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Pole teada ühtegi vabavara-juhtprogrammi Teie helikaardile (%s), kuid on " "olemas tootja juhtprogramm, mille asukoht on \"%s\"." #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "Grupp :" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Partitsiooni %s suuruse muutmisel hävivad sellel kõik andmed" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "Internetiühenduse seadistamine" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "Nimi lisatakse erandite hulka, kui msec uurib salasõnade aegumist" #: ../../network/isdn.pm:1 #, c-format msgid "USB" msgstr "USB" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "Telekanalite otsing" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "Kernel:" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "/_Misvärk" #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "Bengali" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Eelistus: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "Teenused: %d aktiveeritud, kokku %d" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Alglaadimisflopi loomine" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Saalomoni saared" #: ../../standalone/mousedrake:1 #, c-format msgid "Please test your mouse:" msgstr "Palun testige hiirt:" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(moodul %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Töögrupp" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "Printeri masinanimi või IP" #: ../../standalone/drakconnect:1 #, c-format msgid "down" msgstr "pole ühendatud" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "Masina kataloog või moodul" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Printeri nimi tohib sisaldada vaid tähti, numbreid ja alakriipsu" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "Liidese praeguste seadistuste näitamine" #: ../../standalone/printerdrake:1 #, c-format msgid "Add Printer" msgstr "Lisa printer" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Argument määrab, kas klientidel on õigus võtta ühendust\n" "X-serveriga tcp pordis 6000 või mitte." #: ../../help.pm:1 #, c-format msgid "Development" msgstr "Arendus" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Tehtud" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "Veebiserver" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "Tšiili" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "\tsüsteemsete failide kõrvalejätmine\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Lexmarki pakutavad inkjet printerite draiverid toetavad ainult kohalikke " "printereid, mitte aga printereid kaugarvutitel või printserveritel. Ühendage " "palun oma printer kohalikku porti või seadistage see masinal, millega " "printer on ühendatud." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Mitme funktsiooniga seade on automaatselt seadistatud ja suudab ka " "skaneerida. Nüüd võite skaneerida \"scanimage\" abil (\"scanimage -d hp:%s\" " "skänneri määramiseks, kui Teil on neid mitu) käsurealt või graafiliste " "liideste \"xscanimage\" või \"xsane\" vahendusel. Kui kasutate GIMPi, võite " "skaneerida ka menüükäsuga \"Fail\"/\"Hangi\". Kui soovite rohkem infot, " "andke käsureal korraldus \"man scanimage\".\n" "\n" "Ärge selle seadme puhul \"scannerdraket\" kasutage!" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(juba lisatud %s)" #: ../../any.pm:1 #, c-format msgid "Bootloader installation in progress" msgstr "Alglaaduri paigaldus..." #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr ", kasutades käsku %s" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Alt- ja Shift-klahvid korraga" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "Lipud" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "Lisa/kustuta kasutaja" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "Masina/võrgu IP aadress puudub." #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "kord nädalas" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Seadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "Sisestatud masina/võrgu IP aadress ei ole korrektne.\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "Loo/kanna üle varundusvõtmed SSH jaoks" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "See on saadaolevate maade täielik nimekiri" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "Alternatiivne testlehekülg (A4)" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Kui Teil on olemas kõik alltoodud CD-d, klõpsake .\n" "Kui Teil ei ole ühtki neist, klõpsake .\n" "Kui puuduvad mõned CD-d, märkige vaid olemasolevad ja siis ." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "Palun oodake" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "Kasutaja failide varundamine" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Uus" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Nüüd on kätte jõudnud kõige olulisem hetk Teie arvuti turvalisuse " "tagamisel:\n" "Teil tuleb määrata \"administraatori\" parool. Administraator haldab kogu\n" "süsteemi ja ainult temal on õigus uuendusi ette võtta, kasutajaid lisada, " "muuta\n" "kogu süsteemi seadistusi ja nii edasi. Ehk teisisõnu - administraator võib " "teha\n" "kõike! Seepärast tuleks parool valida selline, mida oleks raske ära arvata.\n" "DrakX ütleb Teile, kui parool tundub olevat liiga lihtne. Te võite muidugi " "jätta\n" "ka parooli sisestamata, aga me soovitame väga tungivalt seda siiski teha - \n" "kasvõi juba sel põhjusel, et kuigi Te paigaldate endale GNU/Linuxi " "süsteemi,\n" "ei tähenda see veel, et vigu ette ei võiks tulla. Kuna administraator võib\n" "kõiki piiranguid muuta ning vahel tahtmatultki kustutada oma hooletu\n" "tegevusega kõik andmed mingilt partitsioonilt, on päris oluline, et\n" "administraatoriks saamine ei oleks eriti lihtne.\n" "\n" "Parool võib koosneda nii tähtedest kui numbritest ja peab olema vähemalt\n" "8 (kaheksa) märki pikk. Ärge pange kunagi administraatori parooli kirja - " "see\n" "võib muuta ligipääsu Teie süsteemile võõrastele liiga hõlpsaks.\n" "\n" "Väike soovitus - ärge siiski parooli liiga keeruliseks või pikaks ajage,\n" "sest lõppeks peaksite seda ju suutma ka meelde jätta!\n" "\n" "Kui Te parooli sisestate, seda ekraanil ei näidata. Te peate selle " "sisestama\n" "kaks korda, mis väldib kirjutamisvea võimaluse. Siiski, kui teete ühesuguse\n" "vea kaks korda järjest, on just see \"vigane\" parool, mida Teilt oodatakse\n" "administraatorina sisselogimisel.\n" "\n" "Kui soovite, et ligipääsu käesolevale arvutile kontrolliks mõni\n" "autentimisserver, klõpsake nupul \"%s\".\n" "\n" "Kui Teie võrgus on kasutusel LDAP, NIS või PDC Windowsi domeeni autentimise\n" "teenused, valige neist sobilik \"%s\". Kui Te aga ei juhtu teadma,\n" "mida teha, pöörduge oma võrgu administraatori poole.\n" "\n" "Kui Teil on probleeme salasõna meelespidamisega, Teie arvuti ei ole\n" "ühendatud ühtegi administreeritavasse võrku või Te usaldate täielikult\n" "kõiki, kes Teie arvutit kasutavad, on mõttekas valida \"%s\"." #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "Nimelahenduse võltsimiskaitse" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" "Nüüd on aeg valida masinale meelepärane turvatase. Rusikareeglina peaks\n" "turvatase olema seda kõrgem, mida ligipääsule avatum arvuti on ja mida " "rohkem\n" "leidub sellel olulise tähtsusega andmeid. Samas tähendab kõrgem turvatase\n" "üldiselt kasutamislihtsuse kahanemist.\n" "\n" "Kui Te ei tea, mida valida, leppige pakutud võimalusega." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "Laadi flopilt" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "See printer tuvastati automaatselt. " #: ../../printer/main.pm:1 #, c-format msgid "Uses command %s" msgstr "Kasutades käsku %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "Alglaadimisflopi" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Norra" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "Uute skännerite otsimine..." #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "Apache veebiserver" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "protsessori alamtüüp (nn stepping'u number) " #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "Asukoht, kuhu taastada (kui ei ole /)" #: ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "Käivituslogo pildi seadistamine" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "Gruusia" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Hiina" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Kontrollige, et kõik printerid on ühendatud ja sisse lülitatud).\n" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "Paigaldatud printerite andmete lugemine..." #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr " Puhasta nüüd! " #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "server" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Pange FAT-vormingus flopi seadmesse %s" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "jah tähendab, et protsessoril on matemaatika-kaasprotsessor" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Palun oodake... Rakendan seadistusi" # NOTE: this message will be displayed by grub at boot time; that is# using the BIOS font; that means cp437 charset on 99.99% of PC computers# out there. It is the nsuggested that for non latin languages an ascii# transliteration be used; or maybe the english text be used; as it is best## The lines must fit on screen, aka length < 80# and only one line per string for the GRUB messages##. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)#. -PO: and keep them smaller than 79 chars long #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "SCSI kontrolerid" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " LPD serveril \"%s\", printer \"%s\"" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "Kuvahalduri valimine" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "Zefoconf masina nimi" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "Isetehtud setup/crontab kirje:" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP aadress peab olema kujul 1.2.3.4" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS printing system" msgstr "Trükkimissüsteemi CUPS seadistamine" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Ecuador" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "Lisa element" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "Selle arvuti külge ühendatud printerid on teistele kättesaadavad" #: ../../lang.pm:1 #, c-format msgid "China (Hong Kong)" msgstr "Hiina (Hongkong)" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "Ei suuda leida laadefaili '%s'." #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Helikaarti ei leitud. Proovige see leida pärast paigaldust \"harddrake\" abil" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "Määrati vale port: %s\n" "Õige määrang on \"port/tcp\" või \"port/udp\", \n" "kus port on number 1 ja 65535 vahel." #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Käsurida" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tomé ja Principe" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "Sisselogimine kasutajanimega %s ebaõnnestus (vale parool?)" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Aserbaidžaani (ladina)" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "Pakett ei ole paigaldatud" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Ameerika Samoa" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "Omandage Mandrake eksperdi kuulsus" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Protokoll" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "Fontide kopeerimine Teie süsteemi" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "HardDrake abi" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "Bogomipsid" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Mandrake terminaliserveri seadistused" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackupi raporti üksikasjad\n" "\n" "\n" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "Taasta kõik varukoopiad" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr " paralleelpordis #%s" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Määrab salasõna minimaalse pikkuse ning numbrite ja suurtähtede minimaalse " "hulga" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "Kui on 'jah', kontrollitakse avatud porte." #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "Andmekandja puhastamine võtab mõni hetk aega" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Seda paketti ei saa valida/valimata jätta" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Hoiatus" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Muud failid:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "Kaugarvuti nimi" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "ligipääs X-i rakendustele" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "Vaba ruumi arvutamine Windowsi partitsioonil" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "/Vä_rskenda" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "Itaalia" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Kaimanisaared" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "viga %s lahutamisel: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Printeri nimi" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "keelata" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "Nüüd!" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "%s ei vasta" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "Mudeli valik käsitsi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Vorminda" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Kõige tavalisem ühendusviis ADSL jaoks on pppoe.\n" "Mõnel juhul aga kasutatakse pptp-d, harva dhcp-d.\n" "Kui Te ei tea, kasutage pppoe-d" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "Mitmesugust" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "Zip" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "Vasakpoolne Alt-klahv" #: ../../standalone/logdrake:1 #, c-format msgid "Load setting" msgstr "Koormuse seadistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake ei suutnud määrata Teie printeri %s mudelit. Valige palun õige " "mudel nimekirjast." #: ../../standalone/printerdrake:1 #, c-format msgid "Set selected printer as the default printer" msgstr "Määra valitud printer vaikeprinteriks" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Märkige printer(id), mida soovite üle kanda, ning vajutage \n" "\"Kanna üle\"." #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "PDQ" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "Albaania" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Leedu" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Kompaktne" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "Tuvastati mudel: %s %s" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "MandrakeSoft on välja valinud parima tarkvara just Teile" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "Kohalikud failid" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "võib olla" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Panama" #: ../../standalone/drakTermServ:1 #, c-format msgid "Can't open %s!" msgstr "%s avamine ebaõnnestus!" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Paistab, et Teie videokaardil on TV OUT väljund.\n" "Seda on võimalik kasutada järgnevalt:\n" "\n" "Ühendage arvuti televiisoriga enne alglaadimist ja valige laademenüüst\n" " \"TVout\" \n" "\n" "Kas soovite seda kasutama hakata?" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Monitor" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Asusite seadistama trükkimist Windowsi parooliga kontole. Samba kliendi " "arhitektuuri vea tõttu pannakse parool tavalise tekstina Samba kliendi " "käsureale, mida see kasutab trükitöö saatmiseks Windowsi serverile. Seejärel " "on tolle masina igal kasutajal võimalik parooli ekraanil näha näiteks käsuga " "\"ps auxwww\".\n" "\n" "Soovitame selle asemel kasutada üht alltoodud alternatiividest (igatahes " "tuleks teil tagada, et Teie Windowsi serverile pääsevad ligi ainult " "kohtvõrgu masinad; selleks sobib hästi kasutada tulemüüri):\n" "\n" "Kasutage Windowsi serveril paroolitut kontot, olgu selleks konto \"GUEST\" " "või spetsiaalne trükkimiseks kasutatav konto. Ärge eemaldage aga " "paroolikaitset oma erakontolt ega administraatori kontolt.\n" "\n" "Seadistage Windowsi server nii, et printer oleks kasutatav LPD protokolliga. " "Seejärel seadistage trükkimine Teie masinas Printerdrakes ühendusviisiga \"%s" "\".\n" "\n" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 tuhat värvi (16 bitti)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Salvestamine kõvakettale asukohta: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "Fontide eemaldamine Teie süsteemist" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Hoiatus: võrgukaart (%s) on juba seadistatud.\n" "\n" "Kas soovite ette võtta automaatse ümberseadistamine?\n" "\n" "Seda saab teha ka käsitsi, aga siis peate kindlasti teadma, mida teete." #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "X käivitub koos süsteemiga" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr " adsl" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Ei ole piisavalt partitsioone RAID-%d jaoks\n" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "flopi vorming, mida seade tunnustab" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Püsivara kopeerimine ebaõnnestus, faili %s ei leitud" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: true" msgstr "kohalik seadistus: true" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Seadistatud on järgmised printerid. Topeltklõps printeril võimaldab muuta " "selle seadistusi, teha see vaikeprinteriks või vaadata selle infot." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "Ühendatud" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "Makedoonia" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Mali" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "Sillad ja kontrollerid" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "/Fail/_Salvesta" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "Üksikasjadeta" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "väga kena" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "Eelvaatlus" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "Kaugjuhtimine" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "Valige palun varundamiseks andmekandja..." #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "Vigane e-posti aadress" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 server: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "Luba õhukesi kliente" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Gruusia (\"vene\" asetus)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/_Eelistused" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "Teie printeri mudel" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(HOIATUS! Te kasutate juurpartitsioonil XFS-i, mistõttu\n" "alglaadimisketta loomine 1,44MB-sele flopile tõenäoliselt\n" "ei õnnestu, sest XFS vajab väga suurt draiverit)." #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Pärast varundamist kustutatakse kõvakettalt tar-failid.\n" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "CD- ega DVD-laadefaili ei leitud, palun kopeerige paigaldusprogramm ja rpm-" "failid." #: ../advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Mandrake paljude võimalustega seadistusvahend" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "Salvesta" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "Sel %s skänneril puudub tugi" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "Laeb draiverid USB-seadmete tarbeks." #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "Ketas" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "Printeri seadme URI" #: ../advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" "MandrakeSofti edu tugineb vaba tarkvara põhimõtte järgimisele. Teie uus " "operatsioonisüsteem on üleilmse Linuxi kogukonna ühise töö tulemus." #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "Iisrael" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "Prantsuse Guajaana" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "Sisestama peab käsurea!" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "Kasutaja valik käsitsi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "Printeri seadistuste ülekandmine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Kas soovite trükkimist lubada ülalmainitud printeritel?\n" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "Suid root failide lisamise/eemaldamise kontroll" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Et see töötaks W2K primaarse domeenikontrolleri (PDC) puhul, on Teil vaja " "administraatori privileege, et käivitada serveril käsk \"C:\\>net " "localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\" ja teha " "sellele alglaadimine.\n" "Samuti on Teil vaja domeeni administraatori kasutajanime/parooli, et " "ühendada see masin Windows(TM) domeeniga.\n" "Kui võrguühendus ei ole veel seadistatud, üritab DrakX domeeni ühenduda " "pärast võrgu seadistamist.\n" "Kui midagi peaks ebaõnnestuma ja domeeni autentimine ei tööta, käivitage " "pärast alglaadimist käsurealt 'smbpasswd -j DOMEEN -U KASUTAJA%%PAROOL', kus " "DOMEEN on Teie Windows(TM) domeen ja KASUTAJA%%PAROOL on domeeni " "administraator parooliga.\n" "Käsk 'wbinfo -t' võimaldab kontrollida, kas domeeni autentimisfraasid on " "õiged." #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "%s (port %s)" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "Võrguühenduse kasutamine varundamiseks" #: ../../standalone/drakfloppy:1 #, c-format msgid "Kernel version" msgstr "Kerneli versioon" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "Nüüd on aeg määrata rakendused, mida soovite oma süsteemi paigaldada.\n" "Mandrake Linux pakub tuhandeid pakette ja mõistagi ei eelda keegi, et Te\n" "neid kõiki juba ette tunneksite.\n" "\n" "Paketid on rühmitatud gruppidesse vastavalt nende kasutusalale. Grupid ise " "on\n" "jagatud nelja sektsiooni:\n" "\n" " * \"%s\": kui kavatsete kasutada arvutit tööjaamana, valige siit " "sektsioonist\n" "üks või enam gruppidest;\n" "\n" " * \"%s\": kui kavatsete kasutada arvutit programmeerimiseks, valige\n" "soovitud grupid siit;\n" "\n" " * \"%s\": kui arvuti peab täitma serveri ülesandeid, saate siit valida,\n" "milliseid kõige enam levinud teenuseid oma masinale paigaldada;\n" "\n" " * \"%s\": lõppeks saate siit valida meelepärase graafilise\n" "töökeskkonna. Neist tuleb valida vähemalt üks, kui soovite kasutada " "graafilist tööjaama!\n" "\n" "Hiire liigutamine grupi nimele toob nähtavale selle lühikirjelduse. Kui " "olete\n" "tavapärast paigaldust tehes kõik grupid valimata jätnud (seega talitanud\n" "vastupidi uuenduse mõttele), ilmub dialoog, mis pakub mitmesuguseid\n" "võimalusi minimaalseks paigalduseks.\n" "\n" " * \"%s\": paigaldatakse minimaalselt graafiliseks töölauaks vajalikud " "paketid;\n" "\n" " * \"%s\": paigaldatakse baassüsteem ning põhilised\n" "utiliidid ja nende dokumentatsioon. See peaks sobima näiteks serverile;\n" "\n" " * \"%s\": paigaldatakse minimaalne hulk pakette,\n" "mida on vaja Linuxi töötamiseks (vaid käsurealt). See võtab ruumi umbes\n" "65 MB.\n" "\n" "Ära märkida saab kasti \"%s\", mis on kasuks, kui\n" "tunnete pakette, mida Teile pakutakse, või kui soovite totaalset kontrolli\n" "selle üle, mida Teie masinasse paigaldatakse.\n" "\n" "Kui käivitasite paigalduse resiimis \"%s\", võite jätta kõik grupid\n" "valimata, mis takistab uute pakettide paigaldamist. Seda tasub tarvitada\n" "näiteks olemasoleva süsteemi parandamisel või värskendamisel." #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Kasutaja õige" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "Server" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "Vasakpoolne Shift-klahv" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr " kohalik võrk" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Halb valik, proovige palun uuesti\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "Syslog-i teated saadetakse konsoolile 12" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search new servers" msgstr "Uute serverite otsing" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "Heard ja McDonald" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "Alternatiivne juhtprogramm puudub" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Tavakasutaja > Ekspert" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "(sellel masinal)" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Lüüsi aadress peab olema kujul 1.2.3.4" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" "Leiti \"%s\" kiibil põhinev \"winmodem\". Kas paigaldada vajalik tarkvara?" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "Tuvastan juba paigaldatud pakette..." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "Diferentsvarunduse kasutamine" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "Juhtprogramm" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf sooritab mõnikord alglaadimise ajal mitmesuguseid\n" "asju süsteemi seadistuse säilitamiseks." #: ../../standalone/drakbackup:1 #, c-format msgid "DVD-R device" msgstr "DVD-R seade" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "lpd printserver" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Enne fontide paigaldamist kontrollige, et Teil on õigus neid oma süsteemis " "kasutada ja paigaldada.\n" "\n" " Fonte saab paigaldada normaalsel meetodil. Haruharva võivad vigased fondid " "panna küll X Serveri hanguma." #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot on alglaadur NewWorld Macintosh riistvara jaoks. See suudab laadida " "nii\n" "GNU/Linuxi, MacOSi kui MacOSX, kui need on Teil olemas. Tavaliselt\n" "tuvastatakse ja paigaldatakse need operatsioonisüsteemid korrektselt.\n" "Kui see nii ei ole, saate praegu käsitsi kirjeid lisada. Kuid olge " "parameetrite\n" "valikul hästi hoolas ja ettevaatlik.\n" "\n" "Yabooti põhivalikud on järgmised:\n" "\n" " * Initsialiseerimisteade: tavaline tekstisõnum, mida näidatakse enne\n" "alglaadimise käsurea ilmumist.\n" "\n" " * Alglaadimisseade: näitab, kuhu soovite panna info, mida läheb vaja\n" "GNU/Linuxi algkäivituseks. Üldiselt tuleks selle info tarbeks juba varem " "luua\n" "alglaadimispartitsioon.\n" "\n" " * Open Firmware viivitus: Erinevalt LiLo-st on yabooti puhul võimalik kaks\n" "viivitust. Esimest mõõdetakse sekundites ning selle ajal on Teil võimalik " "valida\n" "CD või OF alglaadimise, MacOS-i või Linuxi vahel.\n" "\n" " * Kernel alglaadimise viivitus: See on sarnane LiLo alglaadimise " "viivitusele.\n" "Pärast Linuxi valimist tekib 0,1-sekundiline viivitus, enne kui\n" "valitakse kerneli vaikekirjeldus.\n" "\n" " * Lubada alglaadimine CD-lt?: Selle valimine võimaldab alglaadimise " "käsureale\n" "``C'' kirjutades valida CD.\n" "\n" " * Lubada OF alglaadimine?: Selle valimine võimaldab alglaadimise käsureale\n" "``N'' kirjutades valida Open Firmware.\n" "\n" " * OS vaikimisi: Siin võite valida, milline operatsioonisüsteem laaditakse " "vaikimisi,\n" "kui Open Firmware viivitus läbi saab." #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "Kolmapäev" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Saksamaa" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "Austria" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Hiir puudub" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "CD/DVD andmekandja suurus (Mb)" #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "Failide loabittide kontroll kasutajate kodukataloogis" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "Helikaardi seadistamiseks käivitage pärast paigaldust \"sndconfig\"" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Sulge puu" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "Automaatpaigalduse seadistaja" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Võrgu seadistamine" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Kuhu soovite alglaaduri paigaldada?" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "Esimene samm on meelepärase keele valik. Siin saate valida keele,\n" "mida kasutada paigaldamisel ja hilisemas töös. Valige esmalt maa,\n" "kus asute, ning seejärel meelepärane keel.\n" "\n" "Klõpsates nupul \"%s\", võite valida muid keeli, mida Teie tööjaamale\n" "paigaldada. Teiste keelte valikul paigaldatakse vastava keele rakenduste\n" "ja dokumentatsiooni failid. Kui Teie masinal töötab näiteks kasutajaid\n" "Hispaaniast, valige puuvaates põhikeeleks eesti keel ning sektsioonis\n" "\"Muud\" märkige ära \"%s\".\n" "\n" "Paigaldada võib ka mitu keelt. Te võite neid valida mitu või kas või kõik,\n" "märkides ära kasti \"%s\". Keele toe valimine tähendab vastavaid\n" "tõlkeid, fonte, õigekirja kontrollijaid jne. Lisaks võimaldab kasti\n" "\"%s\" märkimine sundida süsteemi kasutama\n" "Unicode'i (UTF-8). Arvestage siiski, et see on esialgu eksperimentaalne\n" "võimalus. Kui valite erinevaid kodeeringuid nõudvaid keeli, paigaldatakse\n" "Unicode toetus nagunii.\n" "\n" "Ühelt keelelt teisele lülitumiseks võite administraatorina anda käsu\n" "\"/usr/sbin/localedrake\", mis võimaldab muuta kogu süsteemi keelt,\n" "või tavakasutajana muuta ainult enda kohta käivat keeleseadistust." #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "Mandrake Linuxi praegusel versioonil puudub %s tugi." #: ../../standalone/drakbackup:1 #, c-format msgid "tape" msgstr "lint" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "DHCP klient" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "Kasutajate nimekirja lubamine kuvahalduritel (kdm ja gdm)" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech (jadaport, vana C7 tüüpi)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Taastamine failist %s ebaõnnestus: %s" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Partitsioonitabel seadmel %s on loetamatu, liiga rikutud DrakX-i jaoks :(\n" "Proovin loetamatud kirjed puhastada, kuid ANDMED NEIL HÄVIVAD.\n" "Teine võimalus on keelata DrakX-il partitsioonitabeli muutmine.\n" "(Viga oli selline: %s)\n" "\n" "Kas olete nõus kõigi partitsioonide kaotamisega?\n" #: ../../standalone/drakbug:1 #, c-format msgid "Find Package" msgstr "Paketi otsimine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" "Kas olete ikka kindel, et soovite seadistada trükkimist sellel masinal?\n" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "Uus devfs seade" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "VIGA: %s tekitamine ebaõnnestus." #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "Alglaaduri stiil" #: ../../help.pm:1 #, c-format msgid "Automatic time synchronization" msgstr "Aja automaatne sünkroniseerimine" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "%s ei sisaldanud varukoopiafaile." #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Armeenia (foneetiline)" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "Kaardi mudel:" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "Õhuke Klient" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "Täname, et valisite Mandrake Linux 9.2" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "Serveri käivitamine" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Türkmenistan" #: ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "Kõik kaugmasinad" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "Teemade paigaldamine" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "Hispaania" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Valmistun paigalduseks" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "Muuda valitud masinat/võrku" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "Lisa kasutaja -->" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Nauru" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "TrueType fontide paigaldamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Kohtvõrku ühendatud printerite automaattuvastus" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "LAN seadistused" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "kõvaketta mudel" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" " - /etc/exports haldamine:\n" " \t\tClusterNFS võimaldab eksportida juurfailisüsteemi kettata " "tööjaamadele.\n" " \t\tdrakTermServ loob korrektse kirje, mis võimaldab kettata " "tööjaamadele\n" " \t\tanonüümset ligipääsu juurfailisüsteemile.\n" "\n" " \t\tTüüpiline ekspordikirje ClusterNFS tarbeks näeb välja selline:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tkus SUBNET/MASK määrab Teie võrku." #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Te ei saa haakepunkti %s jaoks kasutada LVM loogilist ketast" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "Windowsi fontide hankimine" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "Teie arvuti võib sünkroniseerida oma aja\n" "mõne internetis asuva ajaserveriga NTP vahendusel" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Iraani" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "Horvaatia" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Vaikelüüs:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "Serveri lisamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "Võrguprinteri nimi" #: ../advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" "MandrakeSoft on loonud erakordsed vahendid, mis aitavad üles seada kõigi " "aegade kõige turvalisema Linuxi versiooni: süsteemi turvahaldur Draksec ja " "võimas tulemüür üheskoos kahandavad väga märgatavalt rünnakute ohtu." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Seade: " #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Lõppkasutaja litsentsileping" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "Süsteemi parameetrid" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "Palun valige meelepärane turvatase" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "See masin on juba nimekirjas ja seda ei ole võimalik uuesti lisada.\n" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr ", USB printer" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Mkbootdiski korrektne sulgemine ebaõnnestus: \n" "\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Muutvarundus salvestab ainult pärast viimast varundamist muudetud või loodud " "failid." #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Valige rakendused, millel on fontide tugi:" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "X-i seadistamine" #: ../../standalone/drakbackup:1 #, c-format msgid "hd" msgstr "hd" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Türgi (traditsiooniline \"F\" mudel)" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Õnnitleme!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "Käivitamiseks kasutatakse omaniku id-d" #: ../../security/l10n.pm:1 #, c-format msgid "Allow remote root login" msgstr "Administraatori võrgust sisselogimise lubamine" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "Alla" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "Toorprinter (draiverita)" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "Paigalda RPM" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Faili trükkimiseks käsurealt (terminaliaknas) võib kasutada kas käsku \"%s " "\" või graafilist trükkimisvahendit: \"xpp \" või \"kprinter " "\". Graafilised vahendid võimaldavad hõlpsamalt valida printerit ja " "muuta valikuid.\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Aega jäänud " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "Briti" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Lahuta" #: ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "Fontide eemaldamine" #: ../../../move/move.pm:1 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Palun oodake, tuvastan ja seadistan seadmeid..." #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Saksa (ilma sammuta)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "\tRaport saadetakse %s-le\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "%s ülekandmine..." #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 tuhat värvi (15 bitti)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "Eksportida saab NFS või Samba abil. Palun valige, kumba kasutada." #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Gambia" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "Mandrake juhtimiskeskus" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../../move/move.pm:1 #, c-format msgid "Reboot" msgstr "Taaskäivitus" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "Mitme funktsiooniga seade" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "Sisestada võib mitmesuguseid porte. \n" "Sobivad näiteks: 139/tcp 139/udp.\n" "Vaadake lähemalt /etc/services." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Tape \n" msgstr "\t-lint \n" #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "Teie arvutis ei ole veel brauserit. Palun paigaldage see, kui soovite " "abiinfot vaadata" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "Salasõna jäetakse meelde" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "rahuldamata %s tõttu" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Internetiühenduse jagamine nüüd töötab." #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-võrk SSH vahendusel.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Kui soovitud printer tuvastati automaatselt, valige see loendist ning " "lisage siis vajadusel kasutajatunnus, parool ja/või töögrupp." #: ../../network/netconnect.pm:1 #, c-format msgid " cable" msgstr " kaabel" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Kasuta vaba ruumi Windowsi partitsioonil" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s leiti asukohas %s, kas seadistada see automaatselt?" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 juhtprogramm: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" "See masin/võrk on juba nimekirjas ja seda ei ole võimalik uuesti lisada.\n" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Valige paketid, mida soovite paigaldada" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Paapua Uus-Guinea" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on a parallel port" msgstr "Mitme funktsiooniga seade paralleelpordis" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Busy files" msgstr "Hõivatud failid" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "Serbia (kirillitsa)" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory where backups are stored" msgstr "Kataloog, kuhu varukoopiad on salvestatud" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "Vaikimisi kerneli sõnumi keelamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Kas soovite määrata selle printeri (\"%s\")\n" "vaikeprinteriks?" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "DHCP vahemiku lõpp" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Alglaadimisketta loomine..." #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "Oodake palun, testime Teie ühendust..." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Võrgu seiskamine" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "Kasutajakonto" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n" "See programm täidab NFS failide lukustamise funktsioone.\n" "Vajalik serveerimisel." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "DHCP klient" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "See on HardDrake - Mandrake riistvara seadistamisvahend.\n" "Versioon: %s\n" "Autor: Thierry Vignaud <" ">\n" "\n" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "tühistada" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Trükkimine/skaneerimine seadmel \"%s\"" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "raid moodulite vahelejätt" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "Lpd on trükideemon, ilma selleta ei ole võimalik trükkida.\n" "Põhimõtteliselt on see server, mis saadab töö printeri(te)le." #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "Iiri" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "Pühapäev" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "Internetiühenduse seadistamine" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "komaga eraldatud numbrit" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Kui valite seadme, näete selle kohta infot väljadel paremal asuvas paneelis " "(\"Info\")" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "Valitud reegel üks tase ülespoole" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Teie süsteemiga on ühendatud\n" "\n" "%s\n" "skänner.\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Kas tõesti eemaldada printer \"%s\"?" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "Paigalduseks ei ole üldse ruumi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "Vaikeprinter" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Olete seadistanud mitu võimalust Internetiga ühendumiseks.\n" "Valige palun see, mida soovite kasutada.\n" "\n" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Modifitseeri RAIDi" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Leiti küll PCI ISDN kaart, kuid selle tüüp on tundmatu. Palun valige PCI " "kaart järgmisel sammul." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Lisa kasutaja" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-kettad %s\n" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "Libeeria" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Pakettide paigaldamine, mis on vajalikud skänneri seadistamiseks " "Scannerdrake abil, ei õnnestunud." #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Palun sisestage Internetiühendust teostava seadme nimi.\n" "\n" "Näited:\n" "\t\tppp+ modemi- või DSL ühenduse korral. \n" "\t\teth0 või eth1 kaabliühenduse korral, \n" "\t\tippp+ ISDN ühenduse korral.\n" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Klaviatuuri valik" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Vormindamine" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "CUPS-i automaatne seadistamine" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" käib..." #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "raadiotoe lubamine" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "Skänneri jagamine masinatele:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Loopback faili nimi: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Valige palun printer, kuhu tuleks saata trükitööd." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "Ära kanna printereid üle" #: ../../help.pm:1 #, c-format msgid "Delay before booting the default image" msgstr "Ooteaeg alglaadimisel" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "Varundamine kõvakettale" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 #, c-format msgid "Configure" msgstr "Seadista" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Hoiatus, avastati veel üks Internetiühendus, mis võib-olla kasutab Teie võrku" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "kasutajate faile" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Palun sisestage oma masina nimi.\n" "Masina nimi peab olema esitatud täiskujul,\n" "näiteks ``minumasin.minufirma.ee''.\n" "Kui Teil on vaikelüüs, siis sisestage ka selle IP aadress" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "Printeri spuuleri valik" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "Uue teema loomine" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "Mandrake vahendite seletused" #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "Laadefaili ei leitud!" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Mõned tähtsad paketid ei saanud korralikult paika.\n" "Teie CD-lugeja või CD on ilmselt vigane.\n" "Paketifaile CD-l saate kontrollida käsuga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "Mandrake Linux 9.2 kujutab endast täiuslikku arendusplatvormi" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "Tuvastati mudel: %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "\"%s\" ei ole korrektne e-posti aadress!" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "X11 kuvahaldur võimaldab Teil graafiliselt sisse logida\n" "süsteemi, kus töötab X Window System, samuti toetab see korraga \n" "mitme X-seansi käivitamist ja neis töötamist." #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "Kui on 'jah', lubatakse igapäevane turvakontroll." #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "Aserbaidžaan" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "Varundamiseks kasutatava seadme nimi" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "Seadmes %s puudub lint!" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" " --doc - link veebileheküljele ( WM tervituse " "kasutajaliidesele)\n" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "see on füüsiline siin, millega seade on ühendatud (nt: PCI, USB, ...)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Kuidas on see printer ühendatud?" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "Turvatase" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "lõplik kuvatihedus" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "Teenused" #: ../../../move/move.pm:1 #, c-format msgid "Auto configuration" msgstr "Automaatne seadistus" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 MB" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Kontori tööjaam" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Kontoritöö programmid: tekstitöötlus (kword, abiword), tabeltöötlus " "(kspread, gnumeric), PDF vaatajad jne" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Mänguvahend" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Meelelahutus: põnevus-, laua-, strateegiamängud jne" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimeedia tööjaam" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Heli ja video mängimine ja redigeerimine" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Interneti tööjaam" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Valik rakendusi meili ja uudiste lugemiseks (mutt, tin...) ning veebi " "lehitsemiseks" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Võrguarvuti (klient)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Mitme protokolli, sealhulgas ssh kliendid" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Seadistamine" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Vahendid süsteemi lihtsamaks administreerimiseks" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Teadustööjaam" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "Teaduserakendused, näiteks gnuplot" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Konsoolivahendid" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Redaktorid, shellid, terminalid, failihaldus" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE tööjaam" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "K töölaua keskkond: graafiline töökeskkond ja rida seonduvaid rakendusi" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome tööjaam" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "Graafiline töökeskkond koos kasutajasõbralike rakendustega" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Muud graafilised töölauad" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, WindowMaker, Enlightenment, Fvwm jt" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C ja C++ arendusteegid, rakendused ja include-failid" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Dokumentatsioon" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Raamatud ja HOWTO-d Linuxi ja vabavara kohta" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standard Base. Võõraste rakenduste toetus" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Veeb/FTP" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache ja Pro-ftpd" #: ../../share/compssUsers:999 msgid "Mail" msgstr "E-post" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "Postfix meiliserver" #: ../../share/compssUsers:999 msgid "Database" msgstr "Andmebaasid" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL või MySQL andmebaasiserver" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Tulemüür/marsruuter" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internetiasjad" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "Nimeserver ja NIS" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Võrguserver" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS, SMB, SSH server, vahendaja (proxy)" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Valik rakendusi e-posti lugemiseks ja saatmiseks ning veebi lehitsemiseks" #~ msgid "The setup has already been done, and it's currently enabled." #~ msgstr "" #~ "Internetiühenduse jagamine on juba seadistatud ja see on praegu aktiivne." #~ msgid "The setup has already been done, but it's currently disabled." #~ msgstr "" #~ "Internetiühenduse jagamine on juba seadistatud, aga hetkel keelatud." #~ msgid "" #~ "Welcome to the Internet Connection Sharing utility!\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Click on Configure to launch the setup wizard." #~ msgstr "" #~ "Internetiühenduse jagamise nõustaja\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Klõpsake nõustaja käivitamiseks nupul 'Seadista'." #~ msgid "Internet Connection Sharing configuration" #~ msgstr "Internetiühenduse jagamise seadistamine" #~ msgid "No Internet Connection Sharing has ever been configured." #~ msgstr "Internetiühenduse jagamist ei ole kunagi seadistatud." #~ msgid "when checked, owner and group won't be changed" #~ msgstr "märkimise korral ei muudeta omanikku ja gruppi" 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 15284 15285 15286 15287 15288 15289 15290 15291 15292 15293 15294 15295 15296 15297 15298 15299 15300 15301 15302 15303 15304 15305 15306 15307 15308 15309 15310 15311 15312 15313 15314 15315 15316 15317 15318 15319 15320 15321 15322 15323 15324 15325 15326 15327 15328 15329 15330 15331 15332 15333 15334 15335 15336 15337 15338 15339 15340 15341 15342 15343 15344 15345 15346 15347 15348 15349 15350 15351 15352 15353 15354 15355 15356 15357 15358 15359 15360 15361 15362 15363 15364 15365 15366 15367 15368 15369 15370 15371 15372 15373 15374 15375 15376 15377 15378 15379 15380 15381 15382 15383 15384 15385 15386 15387 15388 15389 15390 15391 15392 15393 15394 15395 15396 15397 15398 15399 15400 15401 15402 15403 15404 15405 15406 15407 15408 15409 15410 15411 15412 15413 15414 15415 15416 15417 15418 15419 15420 15421 15422 15423 15424 15425 15426 15427 15428 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 15440 15441 15442 15443 15444 15445 15446 15447 15448 15449 15450 15451 15452 15453 15454 15455 15456 15457 15458 15459 15460 15461 15462 15463 15464 15465 15466 15467 15468 15469 15470 15471 15472 15473 15474 15475 15476 15477 15478 15479 15480 15481 15482 15483 15484 15485 15486 15487 15488 15489 15490 15491 15492 15493 15494 15495 15496 15497 15498 15499 15500 15501 15502 15503 15504 15505 15506 15507 15508 15509 15510 15511 15512 15513 15514 15515 15516 15517 15518 15519 15520 15521 15522 15523 15524 15525 15526 15527 15528 15529 15530 15531 15532 15533 15534 15535 15536 15537 15538 15539 15540 15541 15542 15543 15544 15545 15546 15547 15548 15549 15550 15551 15552 15553 15554 15555 15556 15557 15558 15559 15560 15561 15562 15563 15564 15565 15566 15567 15568 15569 15570 15571 15572 15573 15574 15575 15576 15577 15578 15579 15580 15581 15582 15583 15584 15585 15586 15587 15588 15589 15590 15591 15592 15593 15594 15595 15596 15597 15598 15599 15600 15601 15602 15603 15604 15605 15606 15607 15608 15609 15610 15611 15612 15613 15614 15615 15616 15617 15618 15619 15620 15621 15622 15623 15624 15625 15626 15627 15628 15629 15630 15631 15632 15633 15634 15635 15636 15637 15638 15639 15640 15641 15642 15643 15644 15645 15646 15647 15648 15649 15650 15651 15652 15653 15654 15655 15656 15657 15658 15659 15660 15661 15662 15663 15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15684 15685 15686 15687 15688 15689 15690 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703 15704 15705 15706 15707 15708 15709 15710 15711 15712 15713 15714 15715 15716 15717 15718 15719 15720 15721 15722 15723 15724 15725 15726 15727 15728 15729 15730 15731 15732 15733 15734 15735 15736 15737 15738 15739 15740 15741 15742 15743 15744 15745 15746 15747 15748 15749 15750 15751 15752 15753 15754 15755 15756 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773 15774 15775 15776 15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796 15797 15798 15799 15800 15801 15802 15803 15804 15805 15806 15807 15808 15809 15810 15811 15812 15813 15814 15815 15816 15817 15818 15819 15820 15821 15822 15823 15824 15825 15826 15827 15828 15829 15830 15831 15832 15833 15834 15835 15836 15837 15838 15839 15840 15841 15842 15843 15844 15845 15846 15847 15848 15849 15850 15851 15852 15853 15854 15855 15856 15857 15858 15859 15860 15861 15862 15863 15864 15865 15866 15867 15868 15869 15870 15871 15872 15873 15874 15875 15876 15877 15878 15879 15880 15881 15882 15883 15884 15885 15886 15887 15888 15889 15890 15891 15892 15893 15894 15895 15896 15897 15898 15899 15900 15901 15902 15903 15904 15905 15906 15907 15908 15909 15910 15911 15912 15913 15914 15915 15916 15917 15918 15919 15920 15921 15922 15923 15924 15925 15926 15927 15928 15929 15930 15931 15932 15933 15934 15935 15936 15937 15938 15939 15940 15941 15942 15943 15944 15945 15946 15947 15948 15949 15950 15951 15952 15953 15954 15955 15956 15957 15958 15959 15960 15961 15962 15963 15964 15965 15966 15967 15968 15969 15970 15971 15972 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984 15985 15986 15987 15988 15989 15990 15991 15992 15993 15994 15995 15996 15997 15998 15999 16000 16001 16002 16003 16004 16005 16006 16007 16008 16009 16010 16011 16012 16013 16014 16015 16016 16017 16018 16019 16020 16021 16022 16023 16024 16025 16026 16027 16028 16029 16030 16031 16032 16033 16034 16035 16036 16037 16038 16039 16040 16041 16042 16043 16044 16045 16046 16047 16048 16049 16050 16051 16052 16053 16054 16055 16056 16057 16058 16059 16060 16061 16062 16063 16064 16065 16066 16067 16068 16069 16070 16071 16072 16073 16074 16075 16076 16077 16078 16079 16080 16081 16082 16083 16084 16085 16086 16087 16088 16089 16090 16091 16092 16093 16094 16095 16096 16097 16098 16099 16100 16101 16102 16103 16104 16105 16106 16107 16108 16109 16110 16111 16112 16113 16114 16115 16116 16117 16118 16119 16120 16121 16122 16123 16124 16125 16126 16127 16128 16129 16130 16131 16132 16133 16134 16135 16136 16137 16138 16139 16140 16141 16142 16143 16144 16145 16146 16147 16148 16149 16150 16151 16152 16153 16154 16155 16156 16157 16158 16159 16160 16161 16162 16163 16164 16165 16166 16167 16168 16169 16170 16171 16172 16173 16174 16175 16176 16177 16178 16179 16180 16181 16182 16183 16184 16185 16186 16187 16188 16189 16190 16191 16192 16193 16194 16195 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 16220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16237 16238 16239 16240 16241 16242 16243 16244 16245 16246 16247 16248 16249 16250 16251 16252 16253 16254 16255 16256 16257 16258 16259 16260 16261 16262 16263 16264 16265 16266 16267 16268 16269 16270 16271 16272 16273 16274 16275 16276 16277 16278 16279 16280 16281 16282 16283 16284 16285 16286 16287 16288 16289 16290 16291 16292 16293 16294 16295 16296 16297 16298 16299 16300 16301 16302 16303 16304 16305 16306 16307 16308 16309 16310 16311 16312 16313 16314 16315 16316 16317 16318 16319 16320 16321 16322 16323 16324 16325 16326 16327 16328 16329 16330 16331 16332 16333 16334 16335 16336 16337 16338 16339 16340 16341 16342 16343 16344 16345 16346 16347 16348 16349 16350 16351 16352 16353 16354 16355 16356 16357 16358 16359 16360 16361 16362 16363 16364 16365 16366 16367 16368 16369 16370 16371 16372 16373 16374 16375 16376 16377 16378 16379 16380 16381 16382 16383 16384 16385 16386 16387 16388 16389 16390 16391 16392 16393 16394 16395 16396 16397 16398 16399 16400 16401 16402 16403 16404 16405 16406 16407 16408 16409 16410 16411 16412 16413 16414 16415 16416 16417 16418 16419 16420 16421 16422 16423 16424 16425 16426 16427 16428 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 16440 16441 16442 16443 16444 16445 16446 16447 16448 16449 16450 16451 16452 16453 16454 16455 16456 16457 16458 16459 16460 16461 16462 16463 16464 16465 16466 16467 16468 16469 16470 16471 16472 16473 16474 16475 16476 16477 16478 16479 16480 16481 16482 16483 16484 16485 16486 16487 16488 16489 16490 16491 16492 16493 16494 16495 16496 16497 16498 16499 16500 16501 16502 16503 16504 16505 16506 16507 16508 16509 16510 16511 16512 16513 16514 16515 16516 16517 16518 16519 16520 16521 16522 16523 16524 16525 16526 16527 16528 16529 16530 16531 16532 16533 16534 16535 16536 16537 16538 16539 16540 16541 16542 16543 16544 16545 16546 16547 16548 16549 16550 16551 16552 16553 16554 16555 16556 16557 16558 16559 16560 16561 16562 16563 16564 16565 16566 16567 16568 16569 16570 16571 16572 16573 16574 16575 16576 16577 16578 16579 16580 16581 16582 16583 16584 16585 16586 16587 16588 16589 16590 16591 16592 16593 16594 16595 16596 16597 16598 16599 16600 16601 16602 16603 16604 16605 16606 16607 16608 16609 16610 16611 16612 16613 16614 16615 16616 16617 16618 16619 16620 16621 16622 16623 16624 16625 16626 16627 16628 16629 16630 16631 16632 16633 16634 16635 16636 16637 16638 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380 20381 20382 20383 20384 20385 20386 20387 20388 20389 20390 20391 20392 20393 20394 20395 20396 20397 20398 20399 20400 20401 20402 20403 20404 20405 20406 20407 20408 20409 20410 20411 20412 20413 20414 20415 20416 20417 20418 20419 20420 20421 20422 20423 20424 20425 20426 20427 20428 20429 20430 20431 20432 20433 20434 20435 20436 20437 20438 20439 20440 20441 20442 20443 20444 20445 20446 20447 20448 20449 20450 20451 20452 20453 20454 20455 20456 20457 20458 20459 20460 20461 20462 20463 20464 20465 20466 20467 20468 20469 20470 20471 20472 20473 20474 20475 20476 20477 20478 20479 20480 20481 20482 20483 20484 20485 20486 20487 20488 20489 20490 20491 20492 20493 20494 20495 20496 20497 20498 20499 20500 20501 20502 20503 20504 20505 20506 20507 20508 20509 20510 20511 20512 20513 20514 20515 20516 20517 20518 20519 20520 20521 20522 20523 20524 20525 20526 20527 20528 20529 20530 20531 20532 20533 20534 20535 20536 20537 20538 20539 20540 20541 20542 20543 20544 20545 20546 20547 20548 20549 20550 20551 20552 20553 20554 20555 20556 20557 20558 20559 20560 20561 20562 20563 20564 20565 20566 20567 20568 20569 20570 20571 20572 20573 20574 20575 20576 20577 20578 20579 20580 20581 20582 20583 20584 20585 20586 20587 20588 20589 20590 20591 20592 20593 20594 20595 20596 20597 20598 20599 20600 20601 20602 20603 20604 20605 20606 20607 20608 20609 20610 20611 20612 20613 20614 20615 20616 20617 20618 20619 20620 20621 20622 20623 20624 20625 20626 20627 20628 20629 20630 20631 20632 20633 20634 20635 20636 20637 20638 20639 20640 20641 20642 20643 20644 20645 20646 20647 20648 20649 20650 20651 20652 20653 20654 20655 20656 20657 20658 20659 20660 20661 20662 20663 20664 20665 20666 20667 20668 20669 20670 20671 20672 20673 20674 20675 20676 20677 20678 20679 20680 20681 20682 20683 20684 20685 20686 20687 20688 20689 20690 20691 20692 20693 20694 20695 20696 20697 20698 20699 20700 20701 20702 20703 20704 20705 20706 20707 20708 20709 20710 20711 20712 20713 20714 20715 20716 20717 20718 20719 20720 20721 20722 20723 20724 20725 20726 20727 20728 20729 20730 20731 20732 20733 20734 20735 20736 20737 20738 20739 20740 20741 20742 20743 20744 20745 20746 20747 20748 20749 20750 20751 20752 20753 20754 20755 20756 20757 20758 20759 20760 20761 20762 20763 20764 20765 20766 20767 20768 20769 20770 20771 20772 20773 20774 20775 20776 20777 20778 20779 20780 20781 20782 20783 20784 20785 20786 20787 20788 20789 20790 20791 20792 20793 20794 20795 20796 20797 20798 20799 20800 20801 20802 20803 20804 20805 20806 20807 20808 20809 20810 20811 20812 20813 20814 20815 20816 20817 20818 20819 20820 20821 20822 20823 20824 20825 20826 20827 20828 20829 20830 20831 20832 20833 20834 20835 20836 20837 20838 20839 20840 20841 20842 20843 20844 20845 20846 20847 20848 20849 20850 20851 20852 20853 20854 20855 20856 20857 20858 20859 20860 20861 20862 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877 20878 20879 20880 20881 20882 20883 20884 20885 20886 20887 20888 20889 20890 20891 20892 20893 20894 20895 20896 20897 20898 20899 20900 20901 20902 20903 20904 20905 20906 20907 20908 20909 20910 20911 20912 20913 20914 20915 20916 20917 20918 20919 20920 20921 20922 20923 20924 20925 20926 20927 20928 20929 20930 20931 20932 20933 20934 20935 20936 20937 20938 20939 20940 20941 20942 20943 20944 20945 20946 20947 20948 20949 20950 20951 20952 20953 20954 20955 20956 20957 20958 20959 20960 20961 20962 20963 20964 20965 20966 20967 20968 20969 20970 20971 20972 20973 20974 20975 20976 20977 20978 20979 20980 20981 20982 20983 20984 20985 20986 20987 20988 20989 20990 20991 20992 20993 20994 20995 20996 20997 20998 20999 21000 21001 21002 21003 21004 21005 21006 21007 21008 21009 21010 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21032 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21043 21044 21045 21046 21047 21048 21049 21050 21051 21052 21053 21054 21055 21056 21057 21058 21059 21060 21061 21062 21063 21064 21065 21066 21067 21068 21069 21070 21071 21072 21073 21074 21075 21076 21077 21078 21079 21080 21081 21082 21083 21084 21085 21086 21087 21088 21089 21090 21091 21092 21093 21094 21095 21096 21097 21098 21099 21100 21101 21102 21103 21104 21105 21106 21107 21108 21109 21110 21111 21112 21113 21114 21115 21116 21117 21118 21119 21120 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 21131 21132 21133 21134 21135 21136 21137 21138 21139 21140 21141 21142 21143 21144 21145 21146 21147 21148 21149 21150 21151 21152 21153 21154 21155 21156 21157 21158 21159 21160 21161 21162 21163 21164 21165 21166 21167 21168 21169 21170 21171 21172 21173 21174 21175 21176 21177 21178 21179 21180 21181 21182 21183 21184 21185 21186 21187 21188 21189 21190 21191 21192 21193 21194 21195 21196 21197 21198 21199 21200 21201 21202 21203 21204 21205 21206 21207 21208 21209 21210 21211 21212 21213 21214 21215 21216 21217 21218 21219 21220 21221 21222 21223 21224 21225 21226 21227 21228 21229 21230 21231 21232 21233 21234 21235 21236 21237 21238 21239 21240 21241 21242 21243 21244 21245 21246 21247 21248 21249 21250 21251 21252 21253 21254 21255 21256 21257 21258 21259 21260 21261 21262 21263 21264 21265 21266 21267 21268 21269 21270 21271 21272 21273 21274 21275 21276 21277 21278 21279 21280 21281 21282 21283 21284 21285 21286 21287 21288 21289 21290 21291 21292 21293 21294 21295 21296 21297 21298 21299 21300 21301 21302 21303 21304 21305 21306 21307 21308 21309 21310 21311 21312 21313 21314 21315 21316 21317 21318 21319 21320 21321 21322 21323 21324 21325 21326 21327 21328 21329 21330 21331 21332 21333 21334 21335 21336 21337 21338 21339 21340 21341 21342 21343 21344 21345 21346 21347 21348 21349 21350 21351 21352 21353 21354 21355 21356 21357 21358 21359 21360 21361 21362 21363 21364 21365 21366 21367 21368 21369 21370 21371 21372 21373 21374 21375 21376 21377 21378 21379 21380 21381 21382 21383 21384 21385 21386 21387 21388 21389 21390 21391 21392 21393 21394 21395 21396 21397 21398 21399 21400 21401 21402 21403 21404 21405 21406 21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417 21418 21419 21420 21421 21422 21423 21424 21425 21426 21427 21428 21429 21430 21431 21432 21433 21434 21435 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21449 21450 21451 21452 21453 21454 21455 21456 21457 21458 21459 21460 21461 21462 21463 21464 21465 21466 21467 21468 21469 21470 21471 21472 21473 21474 21475 21476 21477 21478 21479 21480 21481 21482 21483 21484 21485 21486 21487 21488 21489 21490 21491 21492 21493 21494 21495 21496 21497 21498 21499 21500 21501 21502 21503 21504 21505 21506 21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517 21518 21519 21520 21521 21522 21523 21524 21525 21526 21527 21528 21529 21530 21531 21532 21533 21534 21535 21536 21537 21538 21539 21540 21541 21542 21543 21544 21545 21546 21547 21548 21549 21550 21551 21552 21553 21554 21555 21556 21557 21558 21559 21560 21561 21562 21563 21564 21565 21566 21567 21568 21569 21570 21571 21572 21573 21574 21575 21576 21577 21578 21579 21580 21581 21582 21583 21584 21585 21586 21587 21588 21589 21590 21591 21592 21593 21594 21595 21596 21597 21598 21599 21600 21601 21602 21603 21604 21605 21606 21607 21608 21609 21610 21611 21612 21613 21614 21615 21616 21617 21618 21619 21620 21621 21622 21623 21624 21625 21626 21627 21628 21629 21630 21631 21632 21633 21634 21635 21636 21637 21638 21639 21640 21641 21642 21643 21644 21645 21646 21647 21648 21649 21650 21651 21652 21653 21654 21655 21656 21657 21658 21659 21660 21661 21662 21663 21664 21665 21666 21667 21668 21669 21670 21671 21672 21673 21674 21675 21676 21677 21678 21679 21680 21681 21682 21683 21684 21685 21686 21687 21688 21689 21690 21691 21692 21693 21694 21695 21696 21697 21698 21699 21700 21701 21702 21703 21704 21705 21706 21707 21708 21709 21710 21711 21712 21713 21714 21715 21716 21717 21718 21719 21720 21721 21722 21723 21724 21725 21726 21727 21728 21729 21730 21731 21732 21733 21734 21735 21736 21737 21738 21739 21740 21741 21742 21743 21744 21745 21746 21747 21748 21749 21750 21751 21752 21753 21754 21755 21756 21757 21758 21759 21760 21761 21762 21763 21764 21765 21766 21767 21768 21769 21770 21771 21772 21773 21774 21775 21776 21777 21778 21779 21780 21781 21782 21783 21784 21785 21786 21787 21788 21789 21790 21791 21792 21793 21794 21795 21796 21797 21798 21799 21800 21801 21802 21803 21804 21805 21806 21807 21808 21809 21810 21811 21812 21813 21814 21815 21816 21817 21818 21819 21820 21821 21822 21823 21824 21825 21826 21827 21828 21829 21830 21831 21832 21833 21834 21835 21836 21837 21838 21839 21840 21841 21842 21843 21844 21845 21846 21847 21848 21849 21850 21851 21852 21853 21854 21855 21856 21857 21858 21859 21860 21861 21862 21863 21864 21865 21866 21867 21868 21869 21870 21871 21872 21873 21874 21875 21876 21877 21878 21879 21880 21881 21882 21883 21884 21885 21886 21887 21888 21889 21890 21891 21892 21893 21894 21895 21896 21897 21898 21899 21900 21901 21902 21903 21904 21905 21906 21907 21908 21909 21910 21911 21912 21913 21914 21915 21916 21917 21918 21919 21920 21921 21922 21923 21924 21925 21926 21927 21928 21929 21930 21931 21932 21933 21934 21935 21936 21937 21938 21939 21940 21941 21942 21943 21944 21945 21946 21947 21948 21949 21950 21951 21952 21953 21954 21955 21956 21957 21958 21959 21960 21961 21962 21963 21964 21965 21966 21967 21968 21969 21970 21971 21972 21973 21974 21975 21976 21977 21978 21979 21980 21981 21982 21983 21984 21985 21986 21987 21988 21989 21990 21991 21992 21993 21994 21995 21996 21997 21998 21999 22000 22001 22002 22003 22004 22005 22006 22007 22008 22009 22010 22011 22012 22013 22014 22015 22016 22017 22018 22019 22020 22021 22022 22023 22024 22025 22026 22027 22028 22029 22030 22031 22032 22033 22034 22035 22036 22037 22038 22039 22040 22041 22042 22043 22044 22045 22046 22047 22048 22049 22050 22051 22052 22053 22054 22055 22056 22057 22058 22059 22060 22061 22062 22063 22064 22065 22066 22067 22068 22069 22070 22071 22072 22073 22074 22075 22076 22077 22078 22079 22080 22081 22082 22083 22084 22085 22086 22087 22088 22089 22090 22091 22092 22093 22094 22095 22096 22097 22098 22099 22100 22101 22102 22103 22104 22105 22106 22107 22108 22109 22110 22111 22112 22113 22114 22115 22116 22117 22118 22119 22120 22121 22122 22123 22124 22125 22126 22127 22128 22129 22130 22131 22132 22133 22134 22135 22136 22137 22138 22139 22140 22141 22142 22143 22144 22145 22146 22147 22148 22149 22150 22151 22152 22153 22154 22155 22156 22157 22158 22159 22160 22161 22162 22163 22164 22165 22166 22167 22168 22169 22170 22171 22172 22173 22174 22175 22176 22177 22178 22179 22180 22181 22182 22183 22184 22185 22186 22187 22188 22189 22190 22191 22192 22193 22194 22195 22196 22197 22198 22199 22200 22201 22202 22203 22204 22205 22206 22207 22208 22209 22210 22211 22212 22213 22214 22215 22216 22217 22218 22219 22220 22221 22222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22234 22235 22236 22237 22238 22239 22240 22241 22242 22243 22244 22245 22246 22247 22248 22249 22250 22251 22252 22253 22254 22255 22256 22257 22258 22259 22260 22261 22262 22263 22264 22265 22266 22267 22268 22269 22270 22271 22272 22273 22274 22275 22276 22277 22278 22279 22280 22281 22282 22283 22284 22285 22286 22287 22288 22289 22290 22291 22292 22293 22294 22295 22296 22297 22298 22299 22300 22301 22302 22303 22304 22305 22306 22307 22308 22309 22310 22311 22312 22313 22314 22315 22316 22317 22318 22319 22320 22321 22322 22323 22324 22325 22326 22327 22328 22329 22330 22331 22332 22333 22334 22335 22336 22337 22338 22339 22340 22341 22342 22343 22344 22345 22346 22347 22348 22349 22350 22351 22352 22353 22354 22355 22356 22357 22358 22359 22360 22361 22362 22363 22364 22365 22366 22367 22368 22369 22370 22371 22372 22373 22374 22375 22376 22377 22378 22379 22380 22381 22382 22383 22384 22385 22386 22387 22388 22389 22390 22391 22392 22393 22394 22395 22396 22397 22398 22399 22400 22401 22402 22403 22404 22405 22406 22407 22408 22409 22410 22411 22412 22413 22414 22415 22416 22417 22418 22419 22420 22421 22422 22423 22424 22425 22426 22427 22428 22429 22430 22431 22432 22433 22434 22435 22436 22437 22438 22439 22440 22441 22442 22443 22444 22445 22446 22447 22448 22449 22450 22451 22452 22453 22454 22455 22456 22457 22458 22459 22460 22461 22462 22463 22464 22465 22466 22467 22468 22469 22470 22471 22472 22473 22474 22475 22476 22477 22478 22479 22480 22481 22482 22483 22484 22485 22486 22487 22488 22489 22490 22491 22492 22493 22494 22495 22496 22497 22498 22499 22500 22501 22502 22503 22504 22505 22506 22507 22508 22509 22510 22511 22512 22513 22514 22515 22516 22517 22518 22519 22520 22521 22522 22523 22524 22525 22526 22527 22528 22529 22530 22531 22532 22533 22534 22535 22536 22537 22538 22539 22540 22541 22542 22543 22544 22545 22546 22547 22548 22549 22550 22551 22552 22553 22554 22555 22556 22557 22558 22559 22560 22561 22562 22563 22564 22565 22566 22567 22568 22569 22570 22571 22572 22573 22574 22575 22576 22577 22578 22579 22580 22581 22582 22583 22584 22585 22586 22587 22588 22589 22590 22591 22592 22593 22594 22595 22596 22597 22598 22599 22600 22601 22602 22603 22604 22605 22606 22607 22608 22609 22610 22611 22612 22613 22614 22615 22616 22617 22618 22619 22620 22621 22622 22623 22624 22625 22626 22627 22628 22629 22630 22631 22632 22633 22634 22635 22636 22637 22638 22639 22640 22641 22642 22643 22644 22645 22646 22647 22648 22649 22650 22651 22652 22653 22654 22655 22656 22657 22658 22659 22660 22661 22662 22663 22664 22665 22666 22667 22668 22669 22670 22671 22672 22673 22674 22675 22676 22677 22678 22679 22680 22681 22682 22683 22684 22685 22686 22687 22688 22689 22690 22691 22692 22693 22694 22695 22696 22697 22698 22699 22700 22701 22702 22703 22704 22705 22706 22707 22708 22709 22710 22711 22712 22713 22714 22715 22716 22717 22718 22719 22720 22721 22722 22723 22724 22725 22726 22727 22728 22729 22730 22731 22732 22733 22734 22735 22736 22737 22738 22739 22740 22741 22742 22743 22744 22745 22746 22747 22748 22749 22750 22751 22752 22753 22754 22755 22756 22757 22758 22759 22760 22761 22762 22763 22764 22765 22766 22767 22768 22769 22770 22771 22772 22773 22774 22775 22776 22777 22778 22779 22780 22781 22782 22783 22784 22785 22786 22787 22788 22789 22790 22791 22792 22793 22794 22795 22796 22797 22798 22799 22800 22801 22802 22803 22804 22805 22806 22807 22808 22809 22810 22811 22812 22813 22814 22815 22816 22817 22818 22819 22820 22821 22822 22823 22824 22825 22826 22827 22828 22829 22830 22831 22832 22833 22834 22835 22836 22837 22838 22839 22840 22841 22842 22843 22844 22845 22846 22847 22848 22849 22850 22851 22852 22853 22854 22855 22856 22857 22858 22859 22860 22861 22862 22863 22864 22865 22866 22867 22868 22869 22870 22871 22872 22873 22874 22875 22876 22877 22878 22879 22880 22881 22882 22883 22884 22885 22886 22887 22888 22889 22890 22891 22892 22893 22894 22895 22896 22897 22898 22899 22900 22901 22902 22903 22904 22905 22906 22907 22908 22909 22910 22911 22912 22913 22914 22915 22916 22917 22918 22919 22920 22921 22922 22923 22924 22925 22926 22927 22928 22929 22930 22931 22932 22933 22934 22935 22936 22937 22938 22939 22940 22941 22942 22943 22944 22945 22946 22947 22948 22949 22950 22951 22952 22953 22954 22955 22956 22957 22958 22959 22960 22961 22962 22963 22964 22965 22966 22967 22968 22969 22970 22971 22972 22973 22974 22975 22976 22977 22978 22979 22980 22981 22982 22983 22984 22985 22986 22987 22988 22989 22990 22991 22992 22993 22994 22995 22996 22997 22998 22999 23000 23001 23002 23003 23004 23005 23006 23007 23008 23009 23010 23011 23012 23013 23014 23015 23016 23017 23018 23019 23020 23021 23022 23023 23024 23025 23026 23027 23028 23029 23030 23031 23032 23033 23034 23035 23036 23037 23038 23039 23040 23041 23042 23043 23044 23045 23046 23047 23048 23049 23050 23051 23052 23053 23054 23055 23056 23057 23058 23059 23060 23061 23062 23063 23064 23065 23066 23067 23068 23069 23070 23071 23072 23073 23074 23075 23076 23077 23078 23079 23080 23081 23082 23083 23084 23085 23086 23087 23088 23089 23090 23091 23092 23093 23094 23095 23096 23097 23098 23099 23100 23101 23102 23103 23104 23105 23106 23107 23108 23109 23110 23111 23112 23113 23114 23115 23116 23117 23118 23119 23120 23121 23122 23123 23124 23125 23126 23127 23128 23129 23130 23131 23132 23133 23134 23135 23136 23137 23138 23139 23140 23141 23142 23143 23144 23145 23146 23147 23148 23149 23150 23151 23152 23153 23154 23155 23156 23157 23158 23159 23160 23161 23162 23163 23164 23165 23166 23167 23168 23169 23170 23171 23172 23173 23174 23175 23176 23177 23178 23179 23180 23181 23182 23183 23184 23185 23186 23187 23188 23189 23190 23191 23192 23193 23194 23195 23196 23197 23198 23199 23200 23201 23202 23203 23204 23205 23206 23207 23208 23209 23210 23211 23212 23213 23214 23215 23216 23217 23218 23219 23220 23221 23222 23223 23224 23225 23226 23227 23228 23229 23230 23231 23232 23233 23234 23235 23236 23237 23238 23239 23240 23241 23242 23243 23244 23245 23246 23247 23248 23249 23250 23251 23252 23253 23254 23255 23256 23257 23258 23259 23260 23261 23262 23263 23264 23265 23266 23267 23268 23269 23270 23271 23272 23273 23274 23275 23276 23277 23278 23279 23280 23281 23282 23283 23284 23285 23286 23287 23288 23289 23290 23291 23292 23293 23294 23295 23296 23297 23298 23299 23300 23301 23302 23303 23304 23305 23306 23307 23308 23309 23310 23311 23312 23313 23314 23315 23316 23317 23318 23319 23320 23321 23322 23323 23324 23325 23326 23327 23328 23329 23330 23331 23332 23333 23334 23335 23336 23337 23338 23339 23340 23341 23342 23343 23344 23345 23346 23347 23348 23349 23350 23351 23352 23353 23354 23355 23356 23357 23358 23359 23360 23361 23362 23363 23364 23365 23366 23367 23368 23369 23370 23371 23372 23373 23374 23375 23376 23377 23378 23379 23380 23381 23382 23383 23384 23385 23386 23387 23388 23389 23390 23391 23392 23393 23394 23395 23396 23397 23398 23399 23400 23401 23402 23403 23404 23405 23406 23407 23408 23409 23410 23411 23412 23413 23414 23415 23416 23417 23418 23419 23420 23421 23422 23423 23424 23425 23426 23427 23428 23429 23430 23431 23432 23433 23434 23435 23436 23437 23438 23439 23440 23441 23442 23443 23444 23445 23446 23447 23448 23449 23450 23451 23452 23453 23454 23455 23456 23457 23458 23459 23460 23461 23462 23463 23464 23465 23466 23467 23468 23469 23470 23471 23472 23473 23474 23475 23476 23477 23478 23479 23480 23481 23482 23483 23484 23485 23486 23487 23488 23489 23490 23491 23492 23493 23494 23495 23496 23497 23498 23499 23500 23501 23502 23503 23504 23505 23506 23507 23508 23509 23510 23511 23512 23513 23514 23515 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23531 23532 23533 23534 23535 23536 23537 23538 23539 23540 23541 23542 23543 23544 23545 23546 23547 23548 23549 23550 23551 23552 23553 23554 23555 23556 23557 23558 23559 23560 23561 23562 23563 23564 23565 23566 23567 23568 23569 23570 23571 23572 23573 23574 23575 23576 23577 23578 23579 23580 23581 23582 23583 23584 23585 23586 23587 23588 23589 23590 23591 23592 23593 23594 23595 23596 23597 23598 23599 23600 23601 23602 23603 23604 23605 23606 23607 23608 23609 23610 23611 23612 23613 23614 23615 23616 23617 23618 23619 23620 23621 23622 23623 23624 23625 23626 23627 23628 23629 23630 23631 23632 23633 23634 23635 23636 23637 23638 23639 23640 23641 23642 23643 23644 23645 23646 23647 23648 23649 23650 23651 23652 23653 23654 23655 23656 23657 23658 23659 23660 23661 23662 23663 23664 23665 23666 23667 23668 23669 23670 23671 23672 23673 23674 23675 23676 23677 23678 23679 23680 23681 23682 23683 23684 23685 23686 23687 23688 23689 23690 23691 23692 23693 23694 23695 23696 23697 23698 23699 23700 23701 23702 23703 23704 23705 23706 23707 23708 23709 23710 23711 23712 23713 23714 23715 23716 23717 23718 23719 23720 23721 23722 23723 23724 23725 23726 23727 23728 23729 23730 23731 23732 23733 23734 23735 23736 23737 23738 23739 23740 23741 23742 23743 23744 23745 23746 23747 23748 23749 23750 23751 23752 23753 23754 23755 23756 23757 23758 23759 23760 23761 23762 23763 23764 23765 23766 23767 23768 23769 23770 23771 23772 23773 23774 23775 23776 23777 23778 23779 23780 23781 23782 23783 23784 23785 23786 23787 23788 23789 23790 23791 23792 23793 23794 23795 23796 23797 23798 23799 23800 23801 23802 23803 23804 23805 23806 23807 23808 23809 23810 23811 23812 23813 23814 23815 23816 23817 23818 23819 23820 23821 23822 23823 23824 23825 23826 23827 23828 23829 23830 23831 23832 23833 23834 23835 23836 23837 23838 23839 23840 23841 23842 23843 23844 23845 23846 23847 23848 23849 23850 23851 23852 23853 23854 23855 23856 23857 23858 23859 23860 23861 23862 23863 23864 23865 23866 23867 23868 23869 23870 23871 23872 23873 23874 23875 23876 23877 23878 23879 23880 23881 23882 23883 23884 23885 23886 23887 23888 23889 23890 23891 23892 23893 23894 23895 23896 23897 23898 23899 23900 23901 23902 23903 23904 23905 23906 23907 23908 23909 23910 23911 23912 23913 23914 23915 23916 23917 23918 23919 23920 23921 23922 23923 23924 23925 23926 23927 23928 23929 23930 23931 23932 23933 23934 23935 23936 23937 23938 23939 23940 23941 23942 23943 23944 23945 23946 23947 23948 23949 23950 23951 23952 23953 23954 23955 23956 23957 23958 23959 23960 23961 23962 23963 23964 23965 23966 23967 23968 23969 23970 23971 23972 23973 23974 23975 23976 23977 23978 23979 23980 23981 23982 23983 23984 23985 23986 23987 23988 23989 23990 23991 23992 23993 23994 23995 23996 23997 23998 23999 24000 24001 24002 24003 24004 24005 24006 24007 24008 24009 24010 24011 24012 24013 24014 24015 24016 24017 24018 24019 24020 24021 24022 24023 24024 24025 24026 24027 24028 24029 24030 24031 24032 24033 24034 24035 24036 24037 24038 24039 24040 24041 24042 24043 24044 24045 24046 24047 24048 24049 24050 24051 24052 24053 24054 24055 24056 24057 24058 24059 24060 24061 24062 24063 24064 24065 24066 24067 24068 24069 24070 24071 24072 24073 24074 24075 24076 24077 24078 24079 24080 24081 24082 24083 24084 24085 24086 24087 24088 24089 24090 24091 24092 24093 24094 24095 24096 24097 24098 24099 24100 24101 24102 24103 24104 24105 24106 24107 24108 24109 24110 24111 24112 24113 24114 24115 24116 24117 24118 24119 24120 24121 24122 24123 24124 24125 24126 24127 24128 24129 24130 24131 24132 24133 24134 24135 24136 24137 24138 24139 24140 24141 24142 24143 24144 24145 24146 24147 24148 24149 24150 24151 24152 24153 24154 24155 24156 24157 24158 24159 24160 24161 24162 24163 24164 24165 24166 24167 24168 24169 24170 24171 24172 24173 24174 24175 24176 24177 24178 24179 24180 24181 24182 24183 24184 24185 24186 24187 24188 24189 24190 24191 24192 24193 24194 24195 24196 24197 24198 24199 24200 24201 24202 24203 24204 24205 24206 24207 24208 24209 24210 24211 24212 24213 24214 24215 24216 24217 24218 24219 24220 24221 24222 24223 24224 24225 24226 24227 24228 24229 24230 24231 24232 24233 24234 24235 24236 24237 24238 24239 24240 24241 24242 24243 24244 24245 24246 24247 24248 24249 24250 24251 24252 24253 24254 24255 24256 24257 24258 24259 24260 24261 24262 24263 24264 24265 24266 24267 24268 24269 24270 24271 24272 24273 24274 24275 24276 24277 24278 24279 24280 24281 24282 24283 24284 24285 24286 24287 24288 24289 24290 24291 24292 24293 24294 24295 24296 24297 24298 24299 24300 24301 24302 24303 24304 24305 24306 24307 24308 24309 24310 24311 24312 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 24326 24327 24328 24329 24330 24331 24332 24333 24334 24335 24336 24337 24338 24339 24340 24341 24342 24343 24344 24345 24346 24347 24348 24349 24350 24351 24352 24353 24354 24355 24356 24357 24358 24359 24360 24361 24362 24363 24364 24365 24366 24367 24368 24369 24370 24371 24372 24373 24374 24375 24376 24377 24378 24379 24380 24381 24382 24383 24384 24385 24386 24387 24388 24389 24390 24391 24392 24393 24394 24395 24396 24397 24398 24399 24400 24401 24402 24403 24404 24405 24406 24407 24408 24409 24410 24411 24412 24413 24414 24415 24416 24417 24418 24419 24420 24421 24422 24423 24424 24425 24426 24427 24428 24429 24430 24431 24432 24433 24434 24435 24436 24437 24438 24439 24440 24441 24442 24443 24444 24445 24446 24447 24448 24449 24450 24451 24452 24453 24454 24455 24456 24457 24458 24459 24460 24461 24462 24463 24464 24465 24466 24467 24468 24469 24470 24471 24472 24473 24474 24475 24476 24477 24478 24479 24480 24481 24482 24483 24484 24485 24486 24487 24488 24489 24490 24491 24492 24493 24494 24495 24496 24497 24498 24499 24500 24501 24502 24503 24504 24505 24506 24507 24508 24509 24510 24511 24512 24513 24514 24515 24516 24517 24518 24519 24520 24521 24522 24523 24524 24525 24526 24527 24528 24529 24530 24531 24532 24533 24534 24535 24536 24537 24538 24539 24540 24541 24542 24543 24544 24545 24546 24547 24548 24549 24550 24551 24552 24553 24554 24555 24556 24557 24558 24559 24560 24561 24562 24563 24564 24565 24566 24567 24568 24569 24570 24571 24572 24573 24574 24575 24576 24577 24578 24579 24580 24581 24582 24583 24584 24585 24586 24587 24588 24589 24590 24591 24592 24593 24594 24595 24596 24597 24598 24599 24600 24601 24602 24603 24604 24605 24606 24607 24608 24609 24610 24611 24612 24613 24614 24615 24616 24617 24618 24619 24620 24621 24622 24623 24624 24625 24626 24627 24628 24629 24630 24631 24632 24633 24634 24635 24636 24637 24638 24639 24640 24641 24642 24643 24644 24645 24646 24647 24648 24649 24650 24651 24652 24653 24654 24655 24656 24657 24658 24659 24660 24661 24662 24663 24664 24665 24666 24667 24668 24669 24670 24671 24672 24673 24674 24675 24676 24677 24678 24679 24680 24681 24682 24683 24684 24685 24686 24687 24688 24689 24690 24691 24692 24693 24694 24695 24696 24697 24698 24699 24700 24701 24702 24703 24704 24705 24706 24707 24708 24709 24710 24711 24712 24713 24714 24715 24716 24717 24718 24719 24720 24721 24722 24723 24724 24725 24726 24727 24728 24729 24730 24731 24732 24733 24734 24735 24736 24737 24738 24739 24740 24741 24742 24743 24744 24745 24746 24747 24748 24749 24750 24751 24752 24753 24754 24755 24756 24757 24758 24759 24760 24761 24762 24763 24764 24765 24766 24767 24768 24769 24770 24771 24772 24773 24774 24775 24776 24777 24778 24779 24780 24781 24782 24783 24784 24785 24786 24787 24788 24789 24790 24791 24792 24793 24794 24795 24796 24797 24798 24799 24800 24801 24802 24803 24804 24805 24806 24807 24808 24809 24810 24811 24812 24813 24814 24815 24816 24817 24818 24819 24820 24821 24822 24823 24824 24825 24826 24827 24828 24829 24830 24831 24832 24833 24834 24835 24836 24837 24838 24839 24840 24841 24842 24843 24844 24845 24846 24847 24848 24849 24850 24851 24852 24853 24854 24855 24856 24857 24858 24859 24860 24861 24862 24863 24864 24865 24866 24867 24868 24869 24870 24871 24872 24873 24874 24875 24876 24877 24878 24879 24880 24881 24882 24883 24884 24885 24886 24887 24888 24889 24890 24891 24892 24893 24894 24895 24896 24897 24898 24899 24900 24901 24902 24903 24904 24905 24906 24907 24908 24909 24910 24911 24912 24913 24914 24915 24916 24917 24918 24919 24920 24921 24922 24923 24924 24925 24926 24927 24928 24929 24930 24931 24932 24933 24934 24935 24936 24937 24938 24939 24940 24941 24942 24943 24944 24945 24946 24947 24948 24949 24950 24951 24952 24953 24954 24955 24956 24957 24958 24959 24960 24961 24962 24963 24964 24965 24966 24967 24968 24969 24970 24971 24972 24973 24974 24975 24976 24977 24978 24979 24980 24981 24982 24983 24984 24985 24986 24987 24988 24989 24990 24991 24992 24993 24994 24995 24996 24997 24998 24999 25000 25001 25002 25003 25004 25005 25006 25007 25008 25009 25010 25011 25012 25013 25014 25015 25016 25017 25018 25019 25020 25021 25022 25023 25024 25025 25026 25027 25028 25029 25030 25031 25032 25033 25034 25035 25036 25037 25038 25039 25040 25041 25042 25043 25044 25045 25046 25047 25048 25049 25050 25051 25052 25053 25054 25055 25056 25057 25058 25059 25060 25061 25062 25063 25064 25065 25066 25067 25068 25069 25070 25071 25072 25073 25074 25075 25076 25077 25078 25079 25080 25081 25082 25083 25084 25085 25086 25087 25088 25089 25090 25091 25092 25093 25094 25095 25096 25097 25098 25099 25100 25101 25102 25103 25104 25105 25106 25107 25108 25109 25110 25111 25112 25113 25114 25115 25116 25117 25118 25119 25120 25121 25122 25123 25124 25125 25126 25127 25128 25129 25130 25131 25132 25133 25134 25135 25136 25137 25138 25139 25140 25141 25142 25143 25144 25145 25146 25147 25148 25149 25150 25151 25152 25153 25154 25155 25156 25157 25158 25159 25160 25161 25162 25163 25164 25165 25166 25167 25168 25169 25170 25171 25172 25173 25174 25175 25176 25177 25178 25179 25180 25181 25182 25183 25184 25185 25186 25187 25188 25189 25190 25191 25192 25193 25194 25195 25196 25197 25198 25199 25200 25201 25202 25203 25204 25205 25206 25207 25208 25209 25210 25211 25212 25213 25214 25215 25216 25217 25218 25219 25220 25221 25222 25223 25224 25225 25226 25227 25228 25229 25230 25231 25232 25233 25234 25235 25236 25237 25238 25239 25240 25241 25242 25243 25244 25245 25246 25247 25248 25249 25250 25251 25252 25253 25254 25255 25256 25257 25258 25259 25260 25261 25262 25263 25264 25265 25266 25267 25268 25269 25270 25271 25272 25273 25274 25275 25276 25277 25278 25279 25280 25281 25282 25283 25284 25285 25286 25287 25288 25289 25290 25291 25292 25293 25294 25295 25296 25297 25298 25299 25300 25301 25302 25303 25304 25305 25306 25307 25308 25309 25310 25311 25312 25313 25314 25315 25316 25317 25318 25319 25320 25321 25322 25323 25324 25325 25326 25327 25328 25329 25330 25331 25332 25333 25334 25335 25336 25337 25338 25339 25340 25341 25342 25343 25344 25345 25346 25347 25348 25349 25350 25351 25352 25353 25354 25355 25356 25357 25358 25359 25360 25361 25362 25363 25364 25365 25366 25367 25368 25369 25370 25371 25372 25373 25374 25375 25376 25377 25378 25379 25380 25381 25382 25383 25384 25385 25386 25387 25388 25389 25390 25391 25392 25393 25394 25395 25396 25397 25398 25399 25400 25401 25402 25403 25404 25405 25406 25407 25408 25409 25410 25411 25412 25413 25414 25415 25416 25417 25418 25419 25420 25421 25422 25423 25424 25425 25426 25427 25428 25429 25430 25431 25432 25433 25434 25435 25436 25437 25438 25439 25440 25441 25442 25443 25444 25445 25446 25447 25448 25449 25450 25451 25452 25453 25454 25455 25456 25457 25458 25459 25460 25461 25462 25463 25464 25465 25466 25467 25468 25469 25470 25471 25472 25473 25474 25475 25476 25477 25478 25479 25480 25481 25482 25483 25484 25485 25486 25487 25488 25489 25490 25491 25492 25493 25494 25495 25496 25497 25498 25499 25500 25501 25502 25503 25504 25505 25506 25507 25508 25509 25510 25511 25512 25513 25514 25515 25516 25517 25518 25519 25520 25521 25522 25523 25524 25525 25526 25527 25528 25529 25530 25531 25532 25533 25534 25535 25536 25537 25538 25539 25540 25541 25542 25543 25544 25545 25546 25547 25548 25549 25550 25551 25552 25553 25554 25555 25556 25557 25558 25559 25560 25561 25562 25563 25564 25565 25566 25567 25568 25569 25570 25571 25572 25573 25574 25575 25576 25577 25578 25579 25580 25581 25582 25583 25584 25585 25586 25587 25588 25589 25590 25591 25592 25593 25594 25595 25596 25597 25598 25599 25600 25601 25602 25603 25604 25605 25606 25607 25608 25609 25610 25611 25612 25613 25614 25615 25616 25617 25618 25619 25620 25621 25622 25623 25624 25625 25626 25627 25628 25629 25630 25631 25632 25633 25634 25635 25636 25637 25638 25639 25640 25641 25642 25643 25644 25645 25646 25647 25648 25649 25650 25651 25652 25653 25654 25655 25656 25657 25658 25659 25660 25661 25662 25663 25664 25665 25666 25667 25668 25669 25670 25671 25672 25673 25674 25675 25676 25677 25678 25679 25680 25681 25682 25683 25684 25685 25686 25687 25688 25689 25690 25691 25692 25693 25694 25695 25696 25697 25698 25699 25700 25701 25702 25703 25704 25705 25706 25707 25708 25709 25710 25711 25712 25713 25714 25715 25716 25717 25718 25719 25720 25721 25722 25723 25724 25725 25726 25727 25728 25729 25730 25731 25732 25733 25734 25735 25736 25737 25738 25739 25740 25741 25742 25743 25744 25745 25746 25747 25748 25749 25750 25751 25752 25753 25754 25755 25756 25757 25758 25759 25760 25761 25762 25763 25764 25765 25766 25767 25768 25769 25770 25771 25772 25773 25774 25775 25776 25777 25778 25779 25780 25781 25782 25783 25784 25785 25786 25787 25788 25789 25790 25791 25792 25793 25794 25795 25796 25797 25798 25799 25800 25801 25802 25803 25804 25805 25806 25807 25808 25809 25810 25811 25812 25813 25814 25815 25816 25817 25818 25819 25820 25821 25822 25823 25824 25825 25826 25827 25828 25829 25830 25831 25832 25833 25834 25835 25836 25837 25838 25839 25840 25841 25842 25843 25844 25845 25846 25847 25848 25849 25850 25851 25852 25853 25854 25855 25856 25857 25858 25859 25860 25861 25862 25863 25864 25865 25866 25867 25868 25869 25870 25871 25872 25873 25874 25875 25876 25877 25878 25879 25880 25881 25882 25883 25884 25885 25886 25887 25888 25889 25890 25891 25892 25893 25894 25895 25896 25897 25898 25899 25900 25901 25902 25903 25904 25905 25906 25907 25908 25909 25910 25911 25912 25913 25914 25915 25916 25917 25918 25919 25920 25921 25922 25923 25924 25925 25926 25927 25928 25929 25930 25931 25932 25933 25934 25935 25936 25937 25938 25939 25940 25941 25942 25943 25944 25945 25946 25947 25948 25949 25950 25951 25952 25953 25954 25955 25956 25957 25958 25959 25960 25961 25962 25963 25964 25965 25966 25967 25968 25969 25970 25971 25972 25973 25974 25975 25976 25977 25978 25979 25980 25981 25982 25983 25984 25985 25986 25987 25988 25989 25990 25991 25992 25993 25994 25995 25996 25997 25998 25999 26000 26001 26002 26003 26004 26005 26006 26007 26008 26009 26010 26011 26012 26013 26014 26015 26016 26017 26018 26019 26020 26021 26022 26023 26024 26025 26026 26027 26028 26029 26030 26031 26032 26033 26034 26035 26036 26037 26038 26039 26040 26041 26042 26043 26044 26045 26046 26047 26048 26049 26050 26051 26052 26053 26054 26055 26056 26057 26058 26059 26060 26061 26062 26063 26064 26065 26066 26067 26068 26069 26070 26071 26072 26073 26074 26075 26076 26077 26078 26079 26080 26081 26082 26083 26084 26085 26086 26087 26088 26089 26090 26091 26092 26093 26094 26095 26096 26097 26098 26099 26100 26101 26102 26103 26104 26105 26106 26107 26108 26109 26110 26111 26112 26113 26114 26115 26116 26117 26118 26119 26120 26121 26122 26123 26124 26125 26126 26127 26128 26129 26130 26131 26132 26133 26134 26135 26136 26137 26138 26139 26140 26141 26142 26143 26144 26145 26146 26147 26148 26149 26150 26151 26152 26153 26154 26155 26156 26157 26158 26159 26160 26161 26162 26163 26164 26165 26166 26167 26168 26169 26170 26171 26172 26173 26174 26175 26176 26177 26178 26179 26180 26181 26182 26183 26184 26185 26186 26187 26188 26189 26190 26191 26192 26193 26194 26195 26196 26197 26198 26199 26200 26201 26202 26203 26204 26205 26206 26207 26208 26209 26210 26211 26212 26213 26214 26215 26216 26217 26218 26219 26220 26221 26222 26223 26224 26225 26226 26227 26228 26229 26230 26231 26232 26233 26234 26235 26236 26237 26238 26239 26240 26241 26242 26243 26244 26245 26246 26247 26248 26249 26250 26251 26252 26253 26254 26255 26256 26257 26258 26259 26260 26261 26262 26263 26264 26265 26266 26267 26268 26269 26270 26271 26272 26273 26274 26275 26276 26277 26278 26279 26280 26281 26282 26283 26284 26285 26286 26287 26288 26289 26290 26291 26292 26293 26294 26295 26296 26297 26298 26299 26300 26301 26302 26303 26304 26305 26306 26307 26308 26309 26310 26311 26312 26313 26314 26315 26316 26317 26318 26319 26320 26321 26322 26323 26324 26325 26326 26327 26328 26329 26330 26331 26332 26333 26334 26335 26336 26337 26338 26339 26340 26341 26342 26343 26344 26345 26346 26347 26348 26349 26350 26351 26352 26353 26354 26355 26356 26357 26358 26359 26360 26361 26362 26363 26364 26365 26366 26367 26368 26369 26370 26371 26372 26373 26374 26375 26376 26377 26378 26379 26380 26381 26382 26383 26384 26385 26386 26387 26388 26389 26390 26391 26392 26393 26394 26395 26396 26397 26398 26399 26400 26401 26402 26403 26404 26405 26406 26407 26408 26409 26410 26411 26412 26413 26414 26415 26416 26417 26418 26419 26420 26421 26422 26423 26424 26425 26426 26427 26428 26429 26430 26431 26432 26433 26434 26435 26436 26437 26438 26439 26440 26441 26442 26443 26444 26445 26446 26447 26448 26449 26450 26451 26452 26453 26454 26455 26456 26457 26458 26459 26460 26461 26462 26463 26464 26465 26466 26467 26468 26469 26470 26471 26472 26473 26474 26475 26476 26477 26478 26479 26480 26481 26482 26483 26484 26485 26486 26487 26488 26489 26490 26491 26492 26493 26494 26495 26496 26497 26498 26499 26500 26501 26502 26503 26504 26505 26506 26507 26508 26509 26510 26511 26512 26513 26514 26515 26516 26517 26518 26519 26520 26521 26522 26523 26524 26525 26526 26527 26528 26529 26530 26531 26532 26533 26534 26535 26536 26537 26538 26539 26540 26541 26542 26543 26544 26545 26546 26547 26548 26549 26550 26551 26552 26553 26554 26555 26556 26557 26558 26559 26560 26561 26562 26563 26564 26565 26566 26567 26568 26569 26570 26571 26572 26573 26574 26575 26576 26577 26578 26579 26580 26581 26582 26583 26584 26585 26586 26587 26588 26589 26590 26591 26592 26593 26594 26595 26596 26597 26598 26599 26600 26601 26602 26603 26604 26605 26606 26607 26608 26609 26610 26611 26612 26613 26614 26615 26616 26617 26618 26619 26620 26621 26622 26623 26624 26625 26626 26627 26628 26629 26630 26631 26632 26633 26634 26635 26636 26637 26638 26639 26640 26641 26642 26643 26644 26645 26646 26647 26648 26649 26650 26651 26652 26653 26654 26655 26656 26657 26658 26659 26660 26661 26662 26663 26664 26665 26666 26667 26668 26669 26670 26671 26672 26673 26674 26675 26676 26677 26678 26679 26680 26681 26682 
# Copyright (C) 2004 Free Software Foundation, Inc.
# Omi Azad <omi@altruists.org>, 2004.
# Khandakar Mujahidul Islam <suzan@BengaLinux.Org>, 2004.
# Progga <progga@BengaLinux.Org>, 2004.
# Jamil Ahmed <jamil@BengaLinux.Org>, 2004, 2005.
# Samia <mailsamia2001@yahoo.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX HEAD\n"
"POT-Creation-Date: 2005-07-01 16:44+0200\n"
"PO-Revision-Date: 2005-03-19 23:18+0600\n"
"Last-Translator: Samia <mailsamia2001@yahoo.com>\n"
"Language-Team: Bangla <mdk-translation@bengalinux.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "আপনি কোন ইউএসবি ডিস্ক ফরম্যাট করতে চান?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"আপনি একটি ইউএসবি যন্ত্র \"%s\" ফরম্যাট করতে যাচ্ছেন। সেটি এটাতে থাকা সব তথ্য মুছে "
"ফেলবে।\n"
"নিশ্চিত হোন যে চিহ্নিত যন্ত্রটিই সেই ইউএসবি যন্ত্র যা আপনি ফরম্যাট করতে চান। \n"
"আমাদের পরামর্শ হচ্ছে এই কাজ করার সময় অন্যান্য ইউএসবি স্টোরেজ জন্য খুলে ফেলুন।"

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "ডিস্ক লেখবার উপযোগী না"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে।\n"
"অনুগ্রহ করে এটা আন-প্লাগ করে রইট প্রটেকশন অপসরন করে\n"
"আবার ইউএসবি ডিস্ক প্লাগ-ইন করুন।"

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "আবার চেষ্টা"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "ইউএসবি ডিস্ক ছাড়াই অগ্রসর হও"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে, কিন্তু এখন\n"
"আমরা নিরাপদভাবে এটা আন-প্লাগও করতে পারছিনা।\n"
"\n"
"\n"
"এই বাটনে ক্লিক করে আপনার মেশিন রিবুট করে ইউএসবি ডিস্ক\n"
"আনপ্লাগ করুন এবং রইট প্রটেকশন অপসরন করে আবার\n"
"ইউএসবি ডিস্ক প্লাগ-ইন করে ম্যান্ড্রিব মুভ চালু করুন।"

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319
#, c-format
msgid "Reboot"
msgstr "রিবুট"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"আপনার ইউএসবি ডিস্কে কোন উইন্ডোজ (FAT) পার্টিশন নেই।\n"
"অগ্রসর হওয়ার জন্য আমাদের উইন্ডোজ (FAT) পার্টিশনের প্রয়োজন\n"
"(যেহেতু উইন্ডোজ চালিত মেশিনসমূহ থেকে ফাইল নিতে বা ব্যবহার\n"
"করার জন্য এটাই সবচাইতে আদর্শ উপায়)। অনুগ্রহ করে\n"
"এই ইউএসবি ডিস্ক বদলে উইন্ডোজ (FAT) পার্টিশন সম্বলিত একটি ইউএসবি ডিস্ক\n"
"সংযুক্ত করুন।\n"
"\n"
"\n"
"আপনি ইউএসবি Key ছাড়াই অগ্রসর হতে পারেন - এখনো আপনি\n"
"ম্যান্ড্রিব মুভকে সাধারণ লাইভ ম্যান্ড্রিব অপারেটিং সিস্টেম\n"
"হিসেবে ব্যবহার করতে পারবেন।"

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"আমরা আপনার সিস্টেমে কোন ইউএসবি ড্রাইভ সনাক্ত করতে\n"
"পারি নাই। আপনা যদি এখন একটু ইউএসবি ড্রাইভ প্লাগ-ইন\n"
"করেন তাহলে এই কম্পিউটারে অথবা অন্য কোন\n"
"কম্পিউটারে পরবর্তি বুটের জন্য ম্যান্ড্রিব মুভ আপনার\n"
"সিস্টেমের কনফিগারেশন এবং হোম ডিরেক্টরির\n"
"ফাইলসমূহ সেখানে সংরক্ষণ করতে পারবে।\n"
"দ্রষ্টব্য: যদি আপনি এখন একটি ইউএসবি ড্রাইভ প্লাগ-ইন\n"
"করেন, তাহলে কিছুক্ষণ অপেক্ষার করতে হবে\n"
"চিহ্নিত করার জন্য।\n"
"\n"
"\n"
"আপনি ইউএসবি ড্রাইভ ছাড়াই অগ্রসর হয়ে ম্যান্ড্রিব \n"
"মুভকে সাধারন লাইভ ম্যান্ড্রিব অপরেটিং সিস্টেম\n"
"হিসেবে ব্যবহার করতে পারেন।"

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "আপনার ডেটা সংরক্ষনের জন্য একটি ডিস্কের প্রয়োজন"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "আবারও একটি ইউএসবি ডিস্ক সনাক্ত হয়েছে"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "ইউএসবি ডিস্ক সেট করা হচ্ছে"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"অনুগ্রহ করে অপেক্ষা করুন, ইউএসবি ডিস্কে সিস্টেম কনফিগারেশন ফাইল সেট করা হচ্ছে..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "স্ক্রীন সেভারে ব্যবহারের জন্য ব্যবহারকারীর তথ্য, পাসওয়ার্ড প্রবেশ করান"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "স্বয়ংক্রিয় কনফিগারেশন"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "অনুগ্রহ করে অপেক্ষা করুন, ডিভাইসগুলি সনাক্ত এবং কনফিগার করা হচ্ছে..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209
#: install_any.pm:1725 install_any.pm:1777 install_steps.pm:81
#: install_steps_interactive.pm:37 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:810 network/netconnect.pm:914
#: network/netconnect.pm:918 network/netconnect.pm:922
#: network/netconnect.pm:927 network/netconnect.pm:1057
#: network/netconnect.pm:1061 network/netconnect.pm:1065
#: network/netconnect.pm:1069 network/netconnect.pm:1177
#: network/netconnect.pm:1182 network/netconnect.pm:1202
#: network/netconnect.pm:1355 network/thirdparty.pm:267
#: network/thirdparty.pm:274 network/thirdparty.pm:310
#: network/thirdparty.pm:312 network/thirdparty.pm:333
#: network/thirdparty.pm:357 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305
#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406
#: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592
#: standalone/drakTermServ:392 standalone/drakTermServ:466
#: standalone/drakTermServ:475 standalone/drakTermServ:770
#: standalone/drakTermServ:777 standalone/drakTermServ:800
#: standalone/drakTermServ:846 standalone/drakTermServ:1022
#: standalone/drakTermServ:1502 standalone/drakTermServ:1518
#: standalone/drakTermServ:1523 standalone/drakTermServ:1531
#: standalone/drakTermServ:1543 standalone/drakTermServ:1564
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1645 standalone/drakbackup:1801
#: standalone/drakbackup:2415 standalone/drakbackup:4104
#: standalone/drakbackup:4324 standalone/drakclock:124
#: standalone/drakconnect:672 standalone/drakconnect:676
#: standalone/drakconnect:681 standalone/drakconnect:696
#: standalone/drakfloppy:297 standalone/drakfloppy:300
#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:261 standalone/drakgw:50 standalone/drakgw:188
#: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292
#: standalone/drakgw:397 standalone/drakroam:41 standalone/draksplash:15
#: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "ত্রুটি"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"একটি ত্রুটি সম্পাদিত হয়েছে, কিন্তু আমি বুঝতে পারছিনা\n"
"কিভাবে এটা সন্দরভাবে হ্যান্ডল করবো।\n"
"আপনি নিজের ঝুঁকিতে অগ্রসর হতে পারেন।"

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "একটি ত্রুটি সম্পাদিত হয়েছে"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"একটি ত্রুটি সম্পাদিত হয়েছে:\n"
"\n"
"\n"
"%s\n"
"\n"
"ইউএসবি ডিস্কের থাকা নষ্ট কনফিগারেশন ফাইলের কারনে\n"
"এরকম হতে পারে, সেরকম হলে সেগুলি অপসরণ করে\n"
"ম্যান্ড্রিব মুভ চালালে সমস্যার সমাধান হতে পারে।\n"
"সেরকম করার জন্য নির্ধারিত বাটনটিতে ক্লিক করুন।\n"
"\n"
"\n"
"আপনি হয়তো রিবুট করে ইউএসবি ড্রাইভ রিমুভ করে\n"
"কন্টেন্টগুলি অন্য OS-এ নিয়ে পর্যবেক্ষন করতে চান, অথবা\n"
"কনসল #3 এবং #4-এ দেখে আন্দাজ করার চেষ্টা করতে\n"
"পারেন কি হয়েছে।"

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "সিস্টেম কনফিগ ফাইলসমূহ অপসরণ করো"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "শুধু রিবুট করো"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "আপনি কোন সিডিরম সাপোর্ট ছাড়াই শুধু রান করতে পারেন"

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "ঐ সমস্থ প্রোগ্রামকে মেরে ফেলো"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "সিডিরমের কোন সাপোর্ট নেই"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
#: diskdrake/interactive.pm:1102
#, c-format
msgid "Read carefully!"
msgstr "সতর্কতার সাথে পড়ো!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"নিম্নবর্তি প্রোগ্রামগুলি চলাকালীন আপনি অন্য সিডিরম ব্যবহার করতে পারবেননা:\n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "সিডিরম অপসরণ করার জন্য মেমরীতে কপি করে নেয়া হচ্ছে"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "২৫৬ কেবি"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "৫১২ কেবি"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "১ এমবি"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "২ এমবি"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "৪ এমবি"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "৮ এমবি"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "১৬ এমবি"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "৩২ এমবি"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "৬৪ এমবি অথবা আরও বেশী"

#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X সার্ভার"

#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "একটি X সার্ভার পছন্দ করুন"

#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head কনফিগারেশন"

#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"আপনার সিস্টেম Multiple Head কনফিগারেশন সাপোর্ট করে।\n"
"আপনা কি করতে চান?"

#: Xconfig/card.pm:258
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Xorg প্যাকেজ ইনস্টল করা যাচ্ছেনা: %s"

#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "আপনার গ্রাফিক কার্ডের জন্য মেমরী সাইজ নির্ধারন করুন"

#: Xconfig/card.pm:345
#, c-format
msgid "Xorg configuration"
msgstr "Xorg কনফিগারেশন"

#: Xconfig/card.pm:347
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Xorg-এর কোন কনফিগারেশন আপনি রাখতে চান?"

#: Xconfig/card.pm:380
#, c-format
msgid "Configure all heads independently"
msgstr "সমস্থ head-গুলিকে আলাদাভাবে কনফিগার কারো"

#: Xconfig/card.pm:381
#, c-format
msgid "Use Xinerama extension"
msgstr "Xinerama এক্সটেনশন ব্যবহার করো"

#: Xconfig/card.pm:386
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "শুধু \"%s\"%s কার্ড কনফিগ করো"

#: Xconfig/card.pm:398 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:405 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "3D হার্ডওয়্যারের গতি সম্পন্ন %s Xorg"

#: Xconfig/card.pm:407
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "আপনি Xorg %s-এ 3D হার্ডওয়্যারের গতির সুবিধা উপভোগ করতে পারেন।"

#: Xconfig/card.pm:413
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "পরীক্ষামূলক 3D হার্ডওয়্যারের গতির সাথে Xorg %s"

#: Xconfig/card.pm:415
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"আপনার কার্ডটি Xfree %s-এর মাধ্যমে 3D হার্ডওয়্যারের গতি পেতে পারে,\n"
"লক্ষ্য রাখবেন যে এটা একটি পরীক্ষামূলক সাপোর্ট এবং আপনার কম্পিউটার অচল হয়ে যেতে "
"পারে।"

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963
#, c-format
msgid "Custom"
msgstr "ব্যবস্থা"

#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:85 install_steps_interactive.pm:1319
#: printer/printerdrake.pm:744 printer/printerdrake.pm:4401
#: printer/printerdrake.pm:4853 standalone/draksplash:85
#: standalone/logdrake:173 standalone/net_applet:219
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "বাহির"

#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "গ্রাফিক কার্ড"

#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "মনিটর"

#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286
#, c-format
msgid "Resolution"
msgstr "রেজুলেশন"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "পরীক্ষা"

#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "অপশন"

# সাম: broken কি সেন্সে ব্যবহৃত হয়েছে?
# অসম্পূর্ণ নাকি corrupt?  
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "আপনার Xorg কনফিগারেশন ফাইলটি অসম্পূর্ণ, এটি অগ্রাহ্য করছি। "

#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"পরিবর্নগুলি রাখব?\n"
"বর্তমান কনফিগারেশনগুলি হচ্ছে:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Head #%d -এর জন্য একটি মনিটর পছন্দ করুন"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "একটি মনিটর পছন্দ করুন"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "প্লাগ'এন প্লে"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "সাধারন"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "পরিবেশক"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "প্লাগ'এন প্লে অনুসন্ধান ব্যার্থ হয়েছে। অনুগ্রহ করে সঠিক মনিটর নির্বাচন করুন"

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"দুইটি জরুরী প্যারামিটার হচ্ছে উল্লম্ব রিফ্রেশ মাত্রা, যেই মাত্রাটি হচ্ছে\n"
"যেটাতে সম্পূর্ণ স্ক্রীন রিফ্রেশ হয়, এবং সবচেয়ে বেশি প্রয়োজনীয় হচ্ছে আনুভূমিক\n"
"sync মাত্রা, যেটাতে স্ক্যানলাইনগুলো প্রদর্শিত হয়।\n"
"\n"
"এটা খুব গুরুত্বপূর্ণ যে"

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horizontal রিফ্রেশ রেট"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertical রিফ্রেশ রেট"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "২৫৬ রঙ (৮ বিট)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "৩২ হাজার রঙ (১৫ বিট)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "৬৫ হাজার রঙ (১৬ বিট)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "১৬ লক্ষ রঙ (২৪ বিট)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "রেজুলেশন"

#: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1583 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "অন্যান্য"

#: Xconfig/resolution_and_depth.pm:357
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "রঙের রেজুলেশন এবং গভীরতার পছন্দ করুন"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Graphics card: %s"
msgstr "%s গ্রাফিক কার্ড"

#: Xconfig/resolution_and_depth.pm:372 interactive.pm:432
#: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:517
#: standalone/drakbackup:1347 standalone/drakbackup:3961
#: standalone/drakbackup:4021 standalone/drakbackup:4065
#: standalone/drakconnect:158 standalone/drakconnect:848
#: standalone/drakconnect:935 standalone/drakconnect:1031
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:165 standalone/drakups:212 standalone/net_monitor:340
#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
#, c-format
msgid "Ok"
msgstr "ঠিক আছে"

#: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:215 standalone/drakbackup:1347
#: standalone/drakbackup:3887 standalone/drakbackup:3891
#: standalone/drakbackup:3949 standalone/drakconnect:157
#: standalone/drakconnect:933 standalone/drakconnect:1030
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:165 standalone/drakups:219 standalone/logdrake:173
#: standalone/net_monitor:339 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
#: ugtk2.pm:908
#, c-format
msgid "Cancel"
msgstr "বাতিল"

#: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527
#: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:284
#: standalone/drakbackup:3883 standalone/drakbug:104
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:509 standalone/drakperm:133 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1040 ugtk2.pm:1041
#, c-format
msgid "Help"
msgstr "সাহায্য"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "এই কনফিগারেশনটি পরীক্ষা করো"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "আপনি কি এই কনফিগারেশন পরীক্ষা করতে চান?"

# Warning-এর বাংলা "নোটিশ" লিখলাম
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"নোটিশ: এই গ্রাফিক্স কার্ডটি পরীক্ষা করতে গিয়ে আপনার কম্পিউটারটি অচল হয়ে যেতে পারে"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"একটি ত্রুটি সাধিত হয়েছে:\n"
"%s\n"
"কিছু মান পরিবর্তনের চেষ্টা করুন"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "%d সেকেন্ডের মধ্যে বের হয়ে যাবে"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "এটাই কি সঠিক সেটিং?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "কীবোর্ড লে-আউট: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "%s ধরণের মাউস\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "মাউস ডিভাইস: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "মনিটর: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "মনিটরের HorizSync: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "মনিটরের VertRefresh: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "গ্রাফিক্স কার্ড: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "গ্রাফিক্স মেমরী: %s\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "রঙের গভীরতা: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "রেজুলেশন: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg ড্রাইভার: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "শুরু থেকেই গ্রাফিকাল ইন্টারফস থাকবে"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"বুট হবার সাথে সাথে সয়ংক্রিয়ভাবে গ্রাফিকাল ইন্টারফেস চালু হবার জন্য আমি আপনার "
"কম্পিউটার সেট করতে পারি।\n"
"আপনি কি রিবুটের পরে Xorg চালু করতে চান?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"মনেহচ্চে আপনার গ্রাফিক কার্ডের টিভি-আউট কানেকটর আছে।\n"
"ফ্রেম বাফার ব্যবহার করে কাজ করবার জন্য কনফিগার করা যাবে।\n"
"\n"
"এটার জন্য বুট করার আগে আপনার গ্রাফিক কার্ডকে টিভির সাথে সংযুক্ত করতে হবে।\n"
"তারপরে বুটলোডারে \"TVout\" এন্ট্রি পছন্দ করতে হবে\n"
"\n"
"আপনার কি এই সুবিধাটি আছে?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "আপনি কি ধরণের টিভি ব্যবহার করছেন?"

# সাম: 
#: Xconfig/xfree.pm:646
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "অনান্য"

#: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:245
#: standalone/service_harddrake:207
#, c-format
msgid "Please wait"
msgstr "অনুগ্রহ করে অপেক্ষা করুন"

#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "বুট লোডার ইনস্টল করা হচ্ছে"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO %s ড্রাইভে একটি নতুন ভলিউম আই-ডি দিতে চায়। যাই হোক, উইন্ডোজ এন-টি,\n"
"২০০০, অথবা এক্স-পি'র বুট ডিস্কের ভলিউম আই-ডি পরিবর্তনে এগুলো একটি দুর্ভাগ্যজনক "
"উইন্ডোজ সমস্যা।\n"
"নতুন একটি ভলিউম আই-ডি দেয়া হবে?"

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Bootloader ইনষ্টলেশন ব্যর্থ হয়েছে। এ সমস্ত ত্রুটি ঘটেছে:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"বুট-লোডার সক্রিয় করার আপনাকে আপনার ওপেন ফার্মওয়্যার বুট-যন্ত্র পরিবর্তন\n"
" করতে হতে পারে। যদি রিবুট করার পর কোন বুটলোডার প্রম্প্‌ট না দেখেন, তাহলে\n"
" রিবুটের কমান্ড অপশনে যান এবং টাইপ করুন: setenv boot-device %s,\\\\:tbxi\n"
" তারপর টাইপ করুন: shut-down\n"
"পরবর্তীতে বুট হওয়ার সময় বুটলোডার প্রম্প্‌ট দেখতে পাওয়া উচিত।"

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"আপনি একটি পার্টিশনে বুটলোডার ইনস্টল করার সিন্ধান্ত নিয়েছেন।\n"
"আপনাকে জানানো যাচ্ছে যে যেই হার্ড ড্রাইভ থেকে বুট করেন সেটাতে আগে থেকেই বুটলোডার "
"আছে\n"
"(যেমন: সিস্টেম কমান্ডার)।\n"
"\n"
"আপনি কোন ড্রাইভ থেকে বুট করছেন?"

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "ড্রাইভের প্রথম সেক্টর (MBR)"

#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "রুট পার্টিশনের প্রথম সেক্টর"

#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "ফ্লপি তে"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "উপেক্ষা"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub ইনস্টলেশন"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "আপনি bootloader টি কোথায় ইনস্টল করতে চান?"

#: any.pm:267 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "বুটের ধরণ কনফিগারেশন"

#: any.pm:269 any.pm:301
#, c-format
msgid "Bootloader main options"
msgstr "বুটলোডারের আসল অপশনসমুহ"

#: any.pm:273
#, c-format
msgid "Give the ram size in MB"
msgstr "মেগাবাইটে র‌্যমের সাইজ প্রদান করুন"

#: any.pm:275
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "``নিয়ন্ত্রিত কমান্ড লাইন অপশন'' অপশনটি পাসওয়ার্ড ছাড়া ব্যবহার করা যাবে না"

#: any.pm:276 any.pm:609 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "পাসওয়ার্ডটি মিলছে না"

#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1299
#, c-format
msgid "Please try again"
msgstr "অনুগ্রহ করে আবার চেষ্ট করুন"

#: any.pm:281 any.pm:304
#, c-format
msgid "Bootloader to use"
msgstr "ব্যবহারের জন্য বুটলোডার"

#: any.pm:283 any.pm:306
#, c-format
msgid "Boot device"
msgstr "বুট ডিভাইস"

#: any.pm:285
#, c-format
msgid "Delay before booting default image"
msgstr "স্বাভাবিক ইমেজ লোড করার আগে দেরী করো"

#: any.pm:286
#, c-format
msgid "Enable ACPI"
msgstr "ACPI এনেবল করো"

#: any.pm:288
#, c-format
msgid "Force no APIC"
msgstr "APIC-র অনুপস্থিতিতে জোর দাও"

#: any.pm:290
#, c-format
msgid "Force No Local APIC"
msgstr "স্থানীয়ভাবে APIC-র অনুপস্থিতিতে জোর দাও"

#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179
#: network/netconnect.pm:564 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1627
#: standalone/drakbackup:3490 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "পাসওয়ার্ড"

#: any.pm:293 any.pm:644 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "পাসওয়ার্ড (পুনরায়)"

#: any.pm:294
#, c-format
msgid "Restrict command line options"
msgstr "কমান্ডলইন অপশনে বাঁধা দাও"

#: any.pm:294
#, c-format
msgid "restrict"
msgstr "বাঁধা দাও"

#: any.pm:296
#, c-format
msgid "Clean /tmp at each boot"
msgstr "প্রতি বুটে /tmp পরিষ্কার করো"

#: any.pm:297
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "যদি প্রয়োজন হয় যথাযথ RAM লাগবে (পাওয়া গেছে %d RAM)"

#: any.pm:305
#, c-format
msgid "Init Message"
msgstr "Init বার্তা"

#: any.pm:307
#, c-format
msgid "Open Firmware Delay"
msgstr "বিলম্বিত ওপেন ফার্মওয়্যার"

#: any.pm:308
#, c-format
msgid "Kernel Boot Timeout"
msgstr "কার্নাল বুটের সময় অতিক্রান্ত হয়েছে"

#: any.pm:309
#, c-format
msgid "Enable CD Boot?"
msgstr "সিডি বুট সক্রিয় করা হবে?"

#: any.pm:310
#, c-format
msgid "Enable OF Boot?"
msgstr "OF বুট সক্রিয় করা হবে?"

#: any.pm:311
#, c-format
msgid "Default OS?"
msgstr "স্বাভাবিক অবস্থায় ব্যবহৃত OS?"

#: any.pm:364
#, c-format
msgid "Image"
msgstr "ইমেজ"

#: any.pm:365 any.pm:375
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:366 any.pm:388
#, c-format
msgid "Append"
msgstr "যুক্ত"

#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "ভিডিওর ধরণ"

#: any.pm:370
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:371
#, c-format
msgid "Network profile"
msgstr "নেটওয়ার্ক প্রোফাইল"

#: any.pm:380 any.pm:385 any.pm:387
#, c-format
msgid "Label"
msgstr "শিরোনাম"

#: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "স্বাভাবিক"

#: any.pm:389
#, c-format
msgid "Initrd-size"
msgstr "Initrd-র সাইজ"

#: any.pm:391
#, c-format
msgid "NoVideo"
msgstr "কোন ভিডিও নেই"

#: any.pm:402
#, c-format
msgid "Empty label not allowed"
msgstr "খালি শিরোনাম গ্রহণযোগ্য নয়"

#: any.pm:403
#, c-format
msgid "You must specify a kernel image"
msgstr "আপনাকে অবশ্যই একটি কার্নালের ইমেজ নির্ধারণ করে দিতে হবে"

#: any.pm:403
#, c-format
msgid "You must specify a root partition"
msgstr "আপনাকে অবশ্যই একটি রুট পার্টিশন নির্ধারণ করে দিতে হবে"

#: any.pm:404
#, c-format
msgid "This label is already used"
msgstr "এই শিরোনামটি আগেই ব্যবহার হয়েছে"

#: any.pm:418
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "আপনি কি ধরণের এন্ট্রি যোগ করতে চান?"

#: any.pm:419
#, c-format
msgid "Linux"
msgstr "লিনাক্স"

#: any.pm:419
#, c-format
msgid "Other OS (SunOS...)"
msgstr "অন্যান্য OS (SunOS...)"

#: any.pm:420
#, c-format
msgid "Other OS (MacOS...)"
msgstr "অন্যান্য OS (MacOS...)"

#: any.pm:420
#, c-format
msgid "Other OS (Windows...)"
msgstr "অন্যান্য OS (Windows...)"

#: any.pm:448
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"এপর্যন্ত আপনার বুটমেনুর এন্ট্রিগুলি এখানে।\n"
"আপনি অন্যান্য এন্ট্রি তৈরী করতে পারেন অথবা আগের এন্ট্রিগুলি পরিবর্তন করতে পারেন।"

#: any.pm:595
#, c-format
msgid "access to X programs"
msgstr "X প্রোগ্রামসমূহে প্রবেশাধিকার"

#: any.pm:596
#, c-format
msgid "access to rpm tools"
msgstr "RPM টুলে প্রবেশাধিকার"

#: any.pm:597
#, c-format
msgid "allow \"su\""
msgstr "\"su\" গ্রহন করো"

#: any.pm:598
#, c-format
msgid "access to administrative files"
msgstr "এডমিনিষ্ট্রেশন সংক্রান্ত ফাইলে প্রবেশাধিকার"

#: any.pm:599
#, c-format
msgid "access to network tools"
msgstr "নেটওয়ার্ক টুলে প্রবেশাধিকার"

#: any.pm:600
#, c-format
msgid "access to compilation tools"
msgstr "compilation টুলে প্রবেশাধিকার"

#: any.pm:605
#, c-format
msgid "(already added %s)"
msgstr "(%s আগেই যোগ করা হয়েছে)"

#: any.pm:610
#, c-format
msgid "This password is too simple"
msgstr "পাসওয়ার্ডটা খুবই সাধারণ"

#: any.pm:611
#, c-format
msgid "Please give a user name"
msgstr "অনুগ্রহ করে একটি উইজার নেম দিন"

#: any.pm:612
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ইউজারনেমে অবশ্যই ছোটহাতের অক্ষর, নম্বর \"-\" এবং \"_\" থাকতে হবে"

#: any.pm:613
#, c-format
msgid "The user name is too long"
msgstr "ইউজারনেমটি অনেক বড়"

#: any.pm:614
#, c-format
msgid "This user name has already been added"
msgstr "এই ইউজারনেমটি এর আগেই যোগ করা হয়েছে"

#: any.pm:615 any.pm:646
#, c-format
msgid "User ID"
msgstr "ব্যবহারকারীর ID"

#: any.pm:616 any.pm:647
#, c-format
msgid "Group ID"
msgstr "দলের ID"

#: any.pm:619
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "অপশন %s-কে অবশ্যই একটি সংখ্যা হতে হবে!"

#: any.pm:620
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:625
#, c-format
msgid "Add user"
msgstr "ইউজার যোগ করো"

#: any.pm:626
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"একটি ইউজার প্রবেশ করান\n"
"%s"

#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4853
#: standalone/drakbackup:2703 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "হয়েছে"

#: any.pm:630 help.pm:51
#, c-format
msgid "Accept user"
msgstr "ইউজার গ্রহন করো"

#: any.pm:641
#, c-format
msgid "Real name"
msgstr "আসল নাম"

#: any.pm:642 standalone/drakbackup:1622
#, c-format
msgid "Login name"
msgstr "লগ-ইন নাম"

#: any.pm:645
#, c-format
msgid "Shell"
msgstr "শেল"

#: any.pm:649
#, c-format
msgid "Icon"
msgstr "আইকন"

#: any.pm:696 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "সয়ংক্রিয় লগ-ইন"

#: any.pm:697
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"আমি আপনার কম্পিউটারকে সয়ংক্রিয়ভাবে একটি ইউজারকে লগইন করার জন্য সেট করতে পারি।"

#: any.pm:698
#, fuzzy, c-format
msgid "Use this feature"
msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?"

#: any.pm:699
#, c-format
msgid "Choose the default user:"
msgstr "স্বাভাবিক ব্যবহারকারীকে পছন্দ করুন:"

#: any.pm:700
#, c-format
msgid "Choose the window manager to run:"
msgstr "রান করার জন্য উইন্ডো ম্যানেজারকে পছন্দ করুন:"

#: any.pm:712 any.pm:779
#, c-format
msgid "Please choose a language to use."
msgstr "ব্যবহার করার জন্য একটি ভাষা পছন্দ করুন"

#: any.pm:713 any.pm:780
#, c-format
msgid "Language choice"
msgstr "পছন্দনীয় ভাষা"

#: any.pm:740
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux বাভিন্ন ভাষা সমর্থন করে।\n"
"আপনি যেই ভাষাটি ইনস্টল করতে চান তা পছন্দ করুন।\n"
"ইনস্টল শেষে রি-স্টার্ট করার পরে সেই ভাষাগুলি উপলব্ধ হবে।"

#: any.pm:759 any.pm:788 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "স্বাভাবিকভাবে ইউনিকোড ব্যবহার করো"

#: any.pm:760 help.pm:647
#, c-format
msgid "All languages"
msgstr "সমস্থ ভাষা"

#: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952
#, c-format
msgid "Country / Region"
msgstr "দেশ / স্থান"

#: any.pm:836
#, c-format
msgid "Please choose your country."
msgstr "অনুগ্রহ করে তোমার দেশ পছন্দ করো।"

#: any.pm:838
#, c-format
msgid "Here is the full list of available countries"
msgstr "উপলব্ধ সমস্থ দেশের নাম এখানে রয়েছে"

#: any.pm:839
#, c-format
msgid "Other Countries"
msgstr "অন্যান্য দেশসমুহ"

#: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:393
#, c-format
msgid "Advanced"
msgstr "উন্নত"

#: any.pm:847
#, c-format
msgid "Input method:"
msgstr "ইনপুট মাধ্যম:"

#: any.pm:848 install_any.pm:421 network/netconnect.pm:154
#: network/netconnect.pm:305 network/netconnect.pm:310
#: network/netconnect.pm:1168 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "একটিও না"

#: any.pm:963
#, c-format
msgid "No sharing"
msgstr "শেয়ারিং নেই"

#: any.pm:963
#, c-format
msgid "Allow all users"
msgstr "সব ব্যবহারকারীদের গ্রহণ করো"

#: any.pm:967
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr "আপনি কি ব্যবহারকারীদের কিছু ডিরেক্টরি শেয়ার করতে দিতে চান?\n"

#: any.pm:979
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: ঐতিহ্যগত ইউনিক্স ফাইল শেয়ারিং সিস্টেম, যা ম্যাক এবং উইন্ডোজে স্বল্প সমর্থিত।"

#: any.pm:982
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: উইন্ডোজ, ম্যাক ও-এস এক্স এবং অনেক আধুনিক লিনাক্স সিস্টেম কর্তৃক ব্যবহৃত ফাইল "
"শেয়ারিং সিস্টেম।"

#: any.pm:990
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"আপনি NFS বা SMB ব্যবহার করে ফাইল পাঠাতে পারেন। যেটি আপনি ব্যবহার করতে চান "
"অনুগ্রহ করে নির্বাচন করুন।"

#: any.pm:1015
#, c-format
msgid "Launch userdrake"
msgstr "userdrake শুরু করো"

#: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5162 standalone/drakTermServ:294
#: standalone/drakbackup:4083 standalone/drakbug:127 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:118
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "বন্ধ"

#: any.pm:1017
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"প্রত্যেক ব্যবহারকারী গ্রুপের \"ফাইল ভাগাভাগি\" ভাগাভাগি করতে পারেন। \n"
"এই গ্রুপে একজণ ব্যবহারকারী যোগ করতে আপনি userdrake ব্যবহার করতে পারেন।"

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "লোকাল ফাইল"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

# সাম
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "স্মার্ট কার্ড"

#: authentication.pm:27 authentication.pm:152
#, c-format
msgid "Windows Domain"
msgstr "উইন্ডোজ ডোমেইন"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "SFU যুক্ত সক্রিয় ডিরেক্টরি"

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "WinBind যুক্ত সক্রিয় ডিরেক্টরি"

#: authentication.pm:55
#, c-format
msgid "Local file:"
msgstr "লোকাল ফাইল:"

#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"লোকাল ফাইলে থাকা ব্যবহারকারীর সকল বিশ্বাসযোগ্যতা ও তথ্যের জন্য লোকাল ব্যবহার করুন"

#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"কিছু অথবা সব নির্ভরযোগ্যতার আপনার কম্পিউটারকে LDAP ব্যবহার করতে বলুন। LDAP আপনার "
"অর্গানাইজেশনের বিভিন্ন ধরনের তথ্যকে আরও সুদৃড় করে"

#: authentication.pm:57
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"সার্বজনীন পাসওয়ার্ড ও গ্রুপ ফাইলসহ আপনি কম্পিউটারের একটি গ্রুপকে একই নেটওয়ার্ক তথ্য "
"সার্ভিস ডোমেইনে চলার অনুমতি দেবে।"

#: authentication.pm:58
#, c-format
msgid "Windows Domain:"
msgstr "উইন্ডোজ ডোমেইন:"

#: authentication.pm:58
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"উইনবাইন্ড আপনার সিস্টেমকে একটি উইন্ডোজ ডোমেইনের তথ্য ও নির্ভরযোগ্য ব্যবহারকারীদের "
"পুনরুদ্ধারের অনুমতি দেবে।"

#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr "SFU যুক্ত সচল ডিরেক্টরি:"

#: authentication.pm:59 authentication.pm:60
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr "নেটওয়ার্কের নির্ভরযোগ্য সার্ভিস প্রদানের জন্য Kerberos একটি নিরাপদ সিস্টেম।"

#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Winbind যুক্ত সচল ডিরেক্টরি:"

#: authentication.pm:85
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP অনুমোদন"

#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP বেইজ dn"

#: authentication.pm:87 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP সার্ভার"

#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "সাধারণ"

#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "এসএসএল"

#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "নিরাপত্তা লে-আউট (SASL/Kerberos)"

#: authentication.pm:110 authentication.pm:148
#, c-format
msgid "Authentication Active Directory"
msgstr "নির্ভরযোগ্য সচল ডিরেক্টরি"

#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180
#, c-format
msgid "Domain"
msgstr "ডোমেইন"

#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "সার্ভার"

#: authentication.pm:114
#, c-format
msgid "LDAP users database"
msgstr "LDAP ব্যবহারকারীদের ডাটাবেজ"

#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr "Anonymous বাইন্ড ব্যবহার করুন "

#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "LDAP ব্যবহারকারী সচল ডিরেক্টরি ব্রাউজ করার অনুমতি দিয়েছে"

#: authentication.pm:117
#, c-format
msgid "Password for user"
msgstr "ব্যবহারকারীর পাসওয়ার্ড"

#: authentication.pm:118
#, c-format
msgid "Encryption"
msgstr "এনক্রিপশন"

#: authentication.pm:129
#, c-format
msgid "Authentication NIS"
msgstr "NIS অনুমোদন"

#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "NIS ডোমেইন"

#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "NIS সার্ভার"

#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"এটার জন্য W2K PDC কাজ করতে, আপনার সম্ভবত admin চালু করার প্রয়োজন হবে: C:\\>net "
"localgroup \"Pre-Windows 2000 Compatible Access\" সবাইকে /যুক্ত করতে  এবং "
"সার্ভার রিবুট করতে হবে।\n"
"উইন্ডোজ(TM) ডোমেইনে যুক্ত হওয়ার জন্য আপনাকে ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম/"
"পাসওয়ার্ডও দিতে হবে।\n"
"যদি নেটওয়ার্কিং এরই মধ্যে চালু না হয়ে থাকে, তাহলে নেটওয়ার্ক সেটআপ করার পর Drakx "
"ডোমেইনে যুক্ত হতেচেষ্টা করবে।\n"
"যদি কোন কারণে এইসেটআপ ব্যর্থ হয় এবং ডোমেইন অনুমোদন কাজ না করে, তাহলে আপনার "
"উইন্ডোজ(TM) ডোমেইনব্যবহার করতে 'smbpasswd -j DOMAIN -U USER%%PASSWORD' চালান, "
"এবং সিস্টেম বুট হবার পরঅ্যাডমিন ব্যবহারকারীনাম/পাসওয়ার্ড দিন।\n"
"'wbinfo -t' কমান্ডটি আপনার অনুমোদিত গোপনীয়তা ভাল কিনা পরীক্ষা করে দেখবে।"

#: authentication.pm:148
#, c-format
msgid "Authentication Windows Domain"
msgstr "অনুমোদিত উইন্ডোজ ডোমেইন"

#: authentication.pm:153
#, c-format
msgid "Domain Admin User Name"
msgstr "ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম"

#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr "ডোমেইন অ্যাডমিনের পাসওয়ার্ড"

#: authentication.pm:155
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr "UID/SID জমা করার জন্য Idmap ব্যবহার করুন "

#: authentication.pm:156
#, c-format
msgid "Default Idmap "
msgstr "ডিফল্ট Idmap"

# sam: authentication
#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড এবং নেটওয়ার্ক পরিচয় প্রমাণ প্রক্রিয়ার নীতিমালা "
"সেট করুন"

#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password"
msgstr "আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড সেট করুন"

#: authentication.pm:172 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "নির্ভরযোগ্য নিয়ম"

#  -PO: keep this short or else the buttons will not fit in the window
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "পাসওয়ার্ড ছাড়া"

#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "এই পাসওয়ার্ডটি খুবই ছোট (এটা অবশ্যই %d অক্ষরের হতে হবে)"

#: authentication.pm:188 network/netconnect.pm:310 network/netconnect.pm:565
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "অনুমোদন"

#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "কোন NIS ডোমেইন ছাড়া ব্রডকাষ্ট ব্যবহার করা যাবেনা"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:753
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"

#: bootloader.pm:853
#, c-format
msgid "LILO with graphical menu"
msgstr "গ্রাফিকাল মেনুর সাথে LILO"

#: bootloader.pm:854
#, c-format
msgid "LILO with text menu"
msgstr "টেক্সট মেনুর সাথে LILO"

#: bootloader.pm:855
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:856
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:934
#, c-format
msgid "not enough room in /boot"
msgstr "/boot -এ বেশী জায়গা নেই"

#: bootloader.pm:1406
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "আপনি %s পার্টিশনে বুটলোডার ইনস্টল করতে পারবেননা\n"

# renumber = রি-নাম্বার লিখলাম। আসলটা আমি জানিনা
#: bootloader.pm:1440
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"পার্টিশন রি-নাম্বার করার কারনে আপনার বুটলোডারের কনফিগারেশন অবশ্যই আপডেট করতে হবে"

#: bootloader.pm:1453
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"বুটলোডার সঠিকভাবে ইনস্টল হতে পারবেনা। আপনাকে rescue বুট করতে হবে এবং \"%s\" "
"পছন্দ করতে হবে"

#: bootloader.pm:1454
#, c-format
msgid "Re-install Boot Loader"
msgstr "বুট লোডার রি-ইনস্টল করো"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "কেবি"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "এমবি"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "জিবি"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "টিবি"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d মিনিট"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "১ মিনিট"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d সেকেন্ড"

#: common.pm:253
#, c-format
msgid "kdesu missing"
msgstr "kdesu পাওয়া যাচ্ছে না"

#: common.pm:256
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper পাওয়া যাচ্ছে না"

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "অষ্ট্রিয়া"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "অষ্ট্রেলিয়া"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "বেলজিয়াম"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "ব্রাজিল"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "কানাডা"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "সুইজারল্যান্ড"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "কোষ্টা রিকা"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "চেক রিপাবলিক"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "জার্মানী"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "ডেনমার্ক"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "এস্তোনিয়া"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "স্পেন"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "ফিনল্যান্ড"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "ফ্রান্স"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "গ্রীস"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "হাঙ্গেরী"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "আয়ারল্যান্ড"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "ইসরাঈল"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "ইতালী"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "জাপান"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "নেদারল্যান্ড"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "নরওয়ে"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "নিউজিল্যান্ড"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "পোল্যান্ড"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "পর্তুগাল"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "রাশিয়া"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "সুইডেন"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "স্লোভাকিয়া"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "থাইল্যান্ড"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "তাইওয়ান"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "দক্ষিন আফ্রিকা"

#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "যুক্তরাষ্ট্র"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV একটি প্রোটোকল যা আপনাকে স্থানীয়ভাবে একটি ওয়েব সার্ভারের ডিরেক্টরি মাউন্ট "
"করার অনুমতি\n"
"দেয়, এবং এটাকে একটি স্থানীয় ফাইলসিস্টেম হিসেবে মনে করুন(সরবরাহকৃত ওয়েব সার্ভারটি "
"WebDAV সার্ভার\n"
"হিসেবে কন্‌ফিগার করা)। যদি আপনি WebDAV মাউন্ট পয়েন্ত যুক্ত করতে চান, তবে \"নতুন\" "
"বেছে নিন।"

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "নতুন"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "আন-মাউন্ট"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "মাউন্ট"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "মাউন্ট পয়েন্ট"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "অনুগ্রহ করে WebDAV সার্ভারের URL প্রবেশ করান"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL অবশ্যই http:// অথবা https:// দিয়ে শুরু করতে হবে"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "সার্ভার:"

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1181 diskdrake/interactive.pm:1259
#, c-format
msgid "Mount point: "
msgstr "মাউন্ট পয়েন্ট:"

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1266
#, c-format
msgid "Options: %s"
msgstr "অপশন: %s"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "অনুগ্রহ করে প্রথমে আপনার ডাটার একটি ব্যাকআপ করে নিন"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"আপনি যদি aboot ব্যবহার করার পরিকল্পনা করে থাকেন, তাহলে ডিষ্কের শুরুতে সাবধানতার "
"সাথে খালি\n"
"জায়গা ছেড়ে দিন (২০৪৮ সেক্টরই যথেষ্ট)"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "সাহায্যকারী"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "কার্য পছন্দ করুন"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"আপনার একটি বড় মাইক্রসফ্ট উইন্ডোজ পার্টিশন আছে।\n"
"সেটাকে আগে রি-সাইজ করার জন্য আমি পরামর্শ দিচ্ছি\n"
"(সেটাকে আগে ক্লিক করুন এবং পরে \"Resize\"-এ ক্লিক করুন)"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "অনুগ্রহ করে একটি পার্টিশনে ক্লিক করুন"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr "বিস্তারিত"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "কোন হার্ড ড্রাইভ পাওয়া যায়নি"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "FS জার্নালাইজ করা হয়েছে"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "সোয়াপ"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "উইন্ডোজ"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1196
#, c-format
msgid "Empty"
msgstr "শূণ্য"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "ফাইল সিস্টেমের ধরণ:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "পরিবর্তে ``%s'' ব্যবহার করুন"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "তৈরী করো"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "ধরণ"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "মুছে ফেলো"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "প্রথমে ``Unmount'' ব্যবহার করুন"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "অন্য একটি পার্টিশন পছন্দ করুন"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "একটি পার্টিশন পছন্দ করুন"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "বাহির"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "পূর্বাবস্থা"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "সাধারণ মোডে বদল করো"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "দক্ষ মোডে বদল করো"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "অগ্রসর হবে?"

# সাম
#: diskdrake/interactive.pm:278
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"পার্টিশন %s ফরম্যাট করা প্রয়োজন।\n"
"অন্যথা fstab এ মাউন্ট পয়েন্ট %s এর কোন এন্ট্রি লেখা হবে না।\n"
"তবুও বের হয়ে যাব কি?"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Quit without saving"
msgstr "সংরক্ষণ ছাড়াই বের হও"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Quit without writing the partition table?"
msgstr "কোন পার্টিশন টেবিল না লিখেই বের হয়ে যাব?"

#: diskdrake/interactive.pm:290
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "আপনি /etc/fstab -এর পরিবর্তন সেভ করতে চান?"

#: diskdrake/interactive.pm:297 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "পার্টিশন টেবিলের পরিবর্তনগুলি কার্যকর করবার জন্য আপনাকে রা-ষ্টার্ট করতে হবে"

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "সব বন্ধ করো"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "সয়ংক্রিয়ভাবে সাজানো"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:121
#, c-format
msgid "More"
msgstr "আরও"

#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "হার্ড ড্রাইভের তথ্য"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "সমস্থ প্রাইমারী পার্টিশনসমূহ ব্যবহৃত হচ্ছে"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "আমি আর পার্টিশন যোগ করতে পারবনা"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"আরও পার্টিশন পাওয়ার জন্য, অনুগ্রহ করে একটি মুছে ফেলুন যাতে করে এক্সটেনডেড পার্টিশন "
"তৈরী করা যায়"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""

#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "পার্টিশন টেবিল সংরক্ষিত করো"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "পার্টিশন টেবিল রিষ্টোর করো"

# ;)
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "পার্টিশন টেবিলকে বাঁচাও"

#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "পার্টিশন টেবিলকে পুনরায় লোড করো"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "রিমুভেবল মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "ফাইল সিলেক্ট করো"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"ব্যাকআপ পার্টিশন সমান সাইজের ছিলনা\n"
"এখনো এগুবো?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "পার্টিশন টেবিল বাঁচানো হচ্ছে"

#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "বিস্তারিত তথ্য"

#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "আকার পরিবর্তন"

#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "ফরম্যাট"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "RAID-তে যোগ করো"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "LVM-এ যোগ করো"

#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "RAID থেকে মুছে ফেলো"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "LVM থেকে মুছে ফেলো"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "RAID পরিবর্তন করো"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "loopback-এর জন্য ব্যবহার করো"

#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "একটি নতুন পার্টিশন তৈরী করো"

#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "শুরুর সেক্টর:"

#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:919
#, c-format
msgid "Size in MB: "
msgstr "মেগাবাইটে সাইজ:"

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:920
#, c-format
msgid "Filesystem type: "
msgstr "ফাইলসিস্টেমের ধরণ:"

#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "পছন্দ"

#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "লজিকাল ভলিউমের নাম"

#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"আপনি কোন নতুন পার্টিশন তৈরী করতে পারবেন না\n"
"(যেহেতু আপনি সর্বোচ্চ প্রাইমারী পার্টিশনের সীমায় পৌছে গিয়েছেন)।\n"
"প্রথমে আপনাকে একটি প্রাইমারী পার্টিশন অপসরন করতে হবে এবং তারপরে এক্সটেনডেড "
"পার্টিশন তৈরী করতে হবে।"

#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "লুকআপ ফাইল রিমুভ করবো?"

#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "%s পার্টিশনের ধরণ পরিবর্তনের পরে সেটার সমস্থ ডাটা হারিয়ে যাবে"

#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "পার্টিশনের ধরণ পরিবর্তন করো"

#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "আপনি কোন ফাইলসিস্টেম চান?"

#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "ext2 থেকে ext3-তে পরিবর্তিত হচ্ছে"

#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "আপনি %s লুপব্যাক ফাইলকে কোথায় মাউন্ট করতে চান ?"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "আপনি %s ডিভাইসকে কোথায় মাউন্ট করতে চান?"

#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"এই পার্টিশনটি লুপব্যাকের জন্য ব্যবহৃত হওয়ার কারনে মাউন্টপয়েন্ট আনসেট করা যাবেনা।\n"
" আগে লুপব্যাক রিমুভ করুন"

#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "আপনি কোথায় মাউন্ট করতে চান %s?"

#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "আকার পরিবর্তন করা হচ্ছে"

#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "FAT ফাইল সিস্টেমের সীমা (Bound) হিসেব করা হচ্ছে"

#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "এই পার্টিশনটি রি-সাইজ করার মত না"

#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "এই পার্টিশনের সমস্থ ডাটা ব্যাকআপ করা উচিত্‍‌"

#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "%s পার্টিশন রি-সাইজ করার পরে, এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"

#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "নতুন সাইজটি পছন্দ করুন"

#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "মেগাবাইটে নতুন সাইজ:"

#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"পার্টিশনের পুনরাকৃতির পর ডাটার সম্পূর্ণতা নিশ্চিত করার জন্য, \n"
"উইন্ডোজে(TM) আপনার পরবর্তী বুটে ফাইলসিস্টেম পরীক্ষা চলবে"

#: diskdrake/interactive.pm:840
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "যোগ করার জন্য উপস্থিত একটি RAID পছন্দ করুন"

#: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859
#, c-format
msgid "new"
msgstr "নতুন"

#: diskdrake/interactive.pm:857
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "যোগ করার জন্য উপস্থিত একটি LVM পছন্দ করুন"

#: diskdrake/interactive.pm:863
#, c-format
msgid "LVM name?"
msgstr "LVM-এর নাম?"

#: diskdrake/interactive.pm:904
#, c-format
msgid "This partition can not be used for loopback"
msgstr "লুপব্যাকের জন্য এই পার্টিশনটি ব্যবহার করা যাবেনা"

#: diskdrake/interactive.pm:917
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:918
#, c-format
msgid "Loopback file name: "
msgstr "Loopback ফাইলের নাম: "

#: diskdrake/interactive.pm:923
#, c-format
msgid "Give a file name"
msgstr "একটি ফাইলের নাম দিন"

#: diskdrake/interactive.pm:926
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "ফাইলটি আগে থেকেই অন্য একটি লুপব্যাকে ব্যবহৃত হচ্ছে, আরেকটি পছন্দ করুন"

#: diskdrake/interactive.pm:927
#, c-format
msgid "File already exists. Use it?"
msgstr "ফাইল আগে থেকেই আছে, ব্যবহার করব?"

#: diskdrake/interactive.pm:950
#, c-format
msgid "Mount options"
msgstr "মাউন্ট অপসন"

#: diskdrake/interactive.pm:957
#, c-format
msgid "Various"
msgstr "বিভিন্ন"

#: diskdrake/interactive.pm:1021
#, c-format
msgid "device"
msgstr "ডিভাইস"

#: diskdrake/interactive.pm:1022
#, c-format
msgid "level"
msgstr "লেভেল"

#: diskdrake/interactive.pm:1023
#, c-format
msgid "chunk size in KiB"
msgstr "কিলোবাইট এ chunk সাইজ"

#: diskdrake/interactive.pm:1040
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "খুবই সাবধান: এই কাজটি ঝুঁকিপূর্ন।"

#: diskdrake/interactive.pm:1055
#, c-format
msgid "What type of partitioning?"
msgstr "কি ধরণের পার্টিশন হবে?"

#: diskdrake/interactive.pm:1093
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "পরিবর্তনগুলি অবস্থান নেবার জন্য আপনাকে রি-ষ্টার্ট করতে হবে"

#: diskdrake/interactive.pm:1102
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "%s ড্রাইভের পার্টিশন টেবিল ডিস্কে লিখতে যাচ্ছি!"

#: diskdrake/interactive.pm:1111
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "পার্টিশন %s -কে ফরমেট করার পরে এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"

#: diskdrake/interactive.pm:1127
#, c-format
msgid "Move files to the new partition"
msgstr "ফাইলগুলিক একটি নতুন পার্টিশনে সরিয়ে ফেলো"

#: diskdrake/interactive.pm:1127
#, c-format
msgid "Hide files"
msgstr "ফাইল লুকানো হোক"

#: diskdrake/interactive.pm:1128
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"%s ডিরেক্টরীতে আগে থেকেই ডাটা আছে\n"
"(%s)"

#: diskdrake/interactive.pm:1139
#, c-format
msgid "Moving files to the new partition"
msgstr "ফাইলগুলিকে একটু নতুন পার্টিশনে নিয়ে যাওয়া হচ্ছে"

#: diskdrake/interactive.pm:1143
#, c-format
msgid "Copying %s"
msgstr "%s কপি করা হচ্ছে"

#: diskdrake/interactive.pm:1147
#, c-format
msgid "Removing %s"
msgstr "%s মুছে ফেলা হচ্ছে"

#: diskdrake/interactive.pm:1161
#, c-format
msgid "partition %s is now known as %s"
msgstr "পার্টিশন %s-কে এখন %s নামে জানা যাবে"

# সাম: renumber = পুনর্বিন্যাস?
#: diskdrake/interactive.pm:1162
#, c-format
msgid "Partitions have been renumbered: "
msgstr "পার্টিশনগুলো পুনঃসংখ্যান করা হয়েছে: "

#: diskdrake/interactive.pm:1182 diskdrake/interactive.pm:1244
#, c-format
msgid "Device: "
msgstr "ডিভাইস:"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Devfs name: "
msgstr "Devfs নাম:"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "Volume label: "
msgstr "ভলিউম লেবেল:"

#: diskdrake/interactive.pm:1185
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS ড্রাইভ লেটার: %s (শুধুমাত্র একটি অনুমান)\n"

#: diskdrake/interactive.pm:1189 diskdrake/interactive.pm:1198
#: diskdrake/interactive.pm:1262
#, c-format
msgid "Type: "
msgstr "ধরণ:"

#: diskdrake/interactive.pm:1193 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "নাম:"

#: diskdrake/interactive.pm:1200
#, c-format
msgid "Start: sector %s\n"
msgstr "শুরু: সেক্টর %s\n"

#: diskdrake/interactive.pm:1201
#, c-format
msgid "Size: %s"
msgstr "সাইজ: %s"

#: diskdrake/interactive.pm:1203
#, c-format
msgid ", %s sectors"
msgstr ", %s সেক্টরসমূহ"

#: diskdrake/interactive.pm:1205
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "সিলিন্ডার %d থেকে %d পর্যন্ত\n"

#: diskdrake/interactive.pm:1206
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1207
#, c-format
msgid "Formatted\n"
msgstr "ফরমেট করা হয়েছে\n"

#: diskdrake/interactive.pm:1208
#, c-format
msgid "Not formatted\n"
msgstr "ফরমেট করা হয়নি\n"

#: diskdrake/interactive.pm:1209
#, c-format
msgid "Mounted\n"
msgstr "মাউন্ট করা হয়েছে\n"

#: diskdrake/interactive.pm:1210
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1215
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"লুপব্যাক ফাইল(গুলি):\n"
"   %s\n"

#: diskdrake/interactive.pm:1216
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"পার্টিশন সাধারণভাবে বুট হয়েছে\n"
"     (MS-DOS বুটের জনে, lilo-র জন্য নয়)\n"

#: diskdrake/interactive.pm:1218
#, c-format
msgid "Level %s\n"
msgstr "লেভেল %s\n"

#: diskdrake/interactive.pm:1219
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "চাঙ্ক সাইজ %d কিলোবাইট\n"

#: diskdrake/interactive.pm:1220
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-ডিস্কসমূহ %s\n"

#: diskdrake/interactive.pm:1222
#, c-format
msgid "Loopback file name: %s"
msgstr "লুপব্যাক ফাইলের নাম: %s"

#: diskdrake/interactive.pm:1225
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"কারণগুলো হতে পারে, এটি একটি\n"
"ড্রাইভার পার্টিশন। আপনার উচিত হবে\n"
"এটাকে এটা ছেড়ে দেয়া।\n"

#: diskdrake/interactive.pm:1228
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"এই বিশেষ বুটস্ট্র্যাপ\n"
"পার্টিশন হচ্ছে আপনার\n"
"সিস্টেমের ডুয়াল-বুটিং এর জন্য।\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Read-only"
msgstr "শুধুমাত্র পড়া যাবে"

#: diskdrake/interactive.pm:1246
#, c-format
msgid "Size: %s\n"
msgstr "সাইজ: %s\n"

#: diskdrake/interactive.pm:1247
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "জ্যামিতি: %s-গুলি সিলিন্ডার, %s-গুলি হেড, %s-গুলি সেক্টর\n"

#: diskdrake/interactive.pm:1248
#, c-format
msgid "Info: "
msgstr "তথ্য:"

#: diskdrake/interactive.pm:1249
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-ডিস্কসমূহ %s\n"

#: diskdrake/interactive.pm:1250
#, c-format
msgid "Partition table type: %s\n"
msgstr "পার্টিশন টেবিলের ধরণ: %s\n"

#: diskdrake/interactive.pm:1251
#, c-format
msgid "on channel %d id %d\n"
msgstr "%d চ্যানেলে %d আইডিতে\n"

#: diskdrake/interactive.pm:1294
#, c-format
msgid "Filesystem encryption key"
msgstr "ফাইল সিস্টেমের এনক্রিপশন কী"

#: diskdrake/interactive.pm:1295
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "আপনার ফাইল সিস্টেমের এনক্রিপশন কী পছন্দ করুন"

#: diskdrake/interactive.pm:1298
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "এই এনক্রিপশন কী টি খুবই সাধারণ (অবশ্যই %d অক্ষর বড় হতে হবে)"

#: diskdrake/interactive.pm:1299
#, c-format
msgid "The encryption keys do not match"
msgstr "এনক্রিপশন কীগুলি মিলছেনা"

#: diskdrake/interactive.pm:1302 network/netconnect.pm:1013
#: standalone/drakconnect:419
#, c-format
msgid "Encryption key"
msgstr "এনক্রিপশন কী"

#: diskdrake/interactive.pm:1303
#, c-format
msgid "Encryption key (again)"
msgstr "এনক্রিপশন কী (পুনরায়)"

#: diskdrake/interactive.pm:1304 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Encryption অ্যালগোরিদম"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "ধরণ বদল করো"

#: diskdrake/smbnfs_gtk.pm:162
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "ইউজারনেম %s ব্যবহার করে লগইন করা গেলোনা (নষ্ট পাসওয়ার্ড?)"

#: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175
#, c-format
msgid "Domain Authentication Required"
msgstr "ডোমেইন অনুমোদন প্রয়োজন"

#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Which username"
msgstr "কোন্‌ ব্যবহারকারীনাম"

#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Another one"
msgstr "অন্য একটি"

#: diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"হোস্টকে ব্যবহার করার জন্য আপনার ব্যবহারকারীনাম, পাসওয়ার্ড এবং ডোমেইনের নাম প্রবেশ "
"করান।"

#: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "ব্যবহারকারীনাম"

#: diskdrake/smbnfs_gtk.pm:204
#, c-format
msgid "Search servers"
msgstr "সার্ভার খোজো"

#: diskdrake/smbnfs_gtk.pm:209
#, c-format
msgid "Search new servers"
msgstr "নতুন সার্ভারের খোজ করো"

#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "%s প্যাকেজগুলি ইনস্টল করা প্রয়োজন। আপনি কি ইনস্টল করতে চান?"

#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "%s আবশ্যিক প্যাকেজ নেই"

#: do_pkgs.pm:182
#, c-format
msgid "Installing packages..."
msgstr "প্যাকেজসমূহ ইনস্টল করা হচ্ছে..."

#: do_pkgs.pm:227
#, c-format
msgid "Removing packages..."
msgstr "প্যাকেজসমূহ অপসরণ করা হচ্ছে..."

#: fs/format.pm:57 fs/format.pm:64
#, c-format
msgid "Formatting partition %s"
msgstr "%s পার্টিশন ফরম্যাট করা হচ্ছে"

#: fs/format.pm:61
#, c-format
msgid "Creating and formatting file %s"
msgstr "%s ফাইল তৈরী এবং ফরম্যাট করা হচ্ছে"

#: fs/format.pm:114
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "আমার জানা নেই পার্টিশন %s-কে কিভাবে %s ধরণে ফরম্যাট করতে হয়"

# এটাও উল্টে যাবে মানে করতে গেলে। কারন মানেটা দাঁড়াবে <দ্বিতীয় %s কে প্রথম %s ফরম্যাট করা ব্যার্থ হয়েছে>
#: fs/format.pm:119 fs/format.pm:121
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s কে %s ফরম্যাট করতে ব্যর্থ হয়েছে"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "সার্কুলার মাউন্টস %s\n"

#: fs/mount.pm:72
#, c-format
msgid "Mounting partition %s"
msgstr "%s পার্টিশন মাউন্ট করা হচ্ছে"

# এখানে কি করতে হবে? দুটোই %s কিন্তু মানেটা হবে : %s ডিরেক্টরিতে %s পার্টিশন মাউন্ট করা সম্ভব হলোনা।
# দেখবেন কি করা যাবে...
#: fs/mount.pm:73
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "%2$s ডিরেক্টরিতে %1$s পার্টিশন মাউন্ট করা ব্যর্থ হয়েছে"

#: fs/mount.pm:78 fs/mount.pm:95
#, c-format
msgid "Checking %s"
msgstr "%s পরীক্ষা করা হচ্ছে"

#: fs/mount.pm:111 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s আনমাউন্টে সমস্যা: %s"

# এনেবল লিখলাম। মানেটা মাথায় আসছেনা
#: fs/mount.pm:140
#, c-format
msgid "Enabling swap partition %s"
msgstr "%s সোয়াপ পার্টিশন সক্রিয় করো"

#: fs/mount_options.pm:111
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

# #msgstr "%2$s কে %1$s ফরম্যাট করা ব্যর্থ হয়েছে"
#: fs/mount_options.pm:113
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"এই ফাইল সিস্টেমে inode প্রবেশ সময় আপডেট করবেন না\n"
"(যেমন,নিউজ সার্ভার দ্রুত করতে নিউজ স্পুলে দ্রুত প্রবেশ)।"

#: fs/mount_options.pm:116
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"শুধুমাত্র স্পষ্টভাবে মাউন্ট করতে পারে (যেমন,\n"
")(-a অপশন ফাইল সিস্টেম মাউন্ট করতে দেবে না)।"

#: fs/mount_options.pm:119
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "কোন চিহ্ন বা বিশেষ ব্লক যন্ত্রকে ফাইল সিস্টেমে ব্যাখ্যা করবেন না।"

#: fs/mount_options.pm:121
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"মাউন্টকৃত ফাইল সিস্টেমে কোন বাইনারি এক্সিকিউট করার অনুমতি দেবেন না।\n"
"এই অপশন সেই সার্ভারের জন্য ব্যবহৃত হতে পারে যেখানে সে তার নিজের চেয়ে\n"
"অন্যান্য আর্কিটেকচারের বাইনারিগুলো বেশি ধারণ করে।"

#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"allow set-user-identifier বা set-group-identifier বিটগুলোকে কোন প্রভাব নেয়ার\n"
"অনুমতি দেবেন না। (এটা যদিও নিরাপদ দেখাচ্ছে, কিন্তু অনিরাপদ হতে পারে যদি আপনার "
"suidperl(1))\n"
"ইনস্টল করা থাকে।)"

#: fs/mount_options.pm:129
#, c-format
msgid "Mount the file system read-only."
msgstr "ফাইল সিস্টেমকে শুধু পড়ার জন্য মাউন্ট করো।"

#: fs/mount_options.pm:131
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "সকল I/O ফাইল সিস্টেম যুগপত্‍ভাবে হওয়া উচিত।"

#: fs/mount_options.pm:135
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"একজন সাধারণ ব্যবহারকারীকে ফাইল সিস্টেম মাউন্ট করার অনুমতি দিন। মাউন্টিং\n"
"ব্যবহারকারীর নাম mtab এ লেখা থাকে সেকারণে সে পুনরায় \n"
"ফাইল সিস্টেমকে আনমাউন্ট করতে পারে।\n"
"এই অপশন পরোক্ষভাবে noexec, nosuid, এবং nodev অপশনকে প্রকাশ করে।"

#: fs/mount_options.pm:141
#, c-format
msgid ""
"Enable user disk quota accounting enabled, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Give write access to ordinary users"
msgstr "সাধারণ ব্যবহারকারীদের লেখার ক্ষমতা দিন"

#: fs/mount_options.pm:145
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "সাধারণ ব্যবহারকারীদের শুধু পড়ার ক্ষমতা দিন"

#: fs/type.pm:375
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "১৬ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি JFS ব্যবহার করতে পারবেন না"

#: fs/type.pm:376
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "৩২ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি ReiserFS ব্যবহার করতে পারবেন না"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "/usr -এর সাথে"

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "সার্ভার"

#: fsedit.pm:210
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"আমি %s যন্ত্রের পার্টিশন টেবিল পড়তে পাচ্ছি না, এটা আমার জন্য খুবই কলুষিত :(\n"
"আমি এর উপর দিয়ে কাজ করতে, নষ্ট পার্টশন মুছে ফেলতে চেষ্টা করব(সব ডাটা হারিয়ে "
"যাবে!)।\n"
"অন্য সমাধান হচ্ছে Drakx কে পার্টিশন টেবিল পরিবর্তন করার অনুমতি না দেয়া।\n"
"(ভুল হচ্ছে %s)\n"
"\n"
"আপনি কি সব পার্টিশন হারাতে রাজি?\n"

#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "মাউন্ট পয়েন্টগুলি অবশ্যই / দিয়ে শুরু হতে হবে"

# * = alphanumerical = বাংলাটা মনে পড়ছেনা
#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "মাউন্ট পয়েন্টগুলিতে শুধু * অক্ষর থাকবে"

#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "এই পার্টিশনটি আগে থেকেই %s মাউন্টপয়েন্ট নামে আছে\n"

#: fsedit.pm:385
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"আপনি একটি সফ্টওয়্যার RAID পার্টিশনকে রুট (/) হিসেবে নির্বাচন করেছেন।\n"
"/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n"
"অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন"

#: fsedit.pm:390
#, c-format
msgid ""
"You can not use a LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""

#: fsedit.pm:392
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""

#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "root ফাইল সিস্টেমের মধ্যে এই ডিরেক্টরি থাকা উচিত"

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"এই মাউন্ট পয়েন্টের জন্য আপনার একটি সঠিক ফাইল সিস্টেম (ext2/ext3, reiserfs, xfs, "
"বা jfs) প্রয়োজন\n"

#: fsedit.pm:404
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "আপনি %s মাউন্ট পয়েন্টের জন্য একটি এনক্রিপটেড ফাইল ব্যবহার করতে পারবেন"

#: fsedit.pm:465
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "স্বয়ংক্রিয়-বন্টনের জন্য কোন খালি জায়গা নেই"

#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr "কিছু করার নাই"

#: harddrake/data.pm:62 install_any.pm:1660
#, c-format
msgid "Floppy"
msgstr "ফ্লপি"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "জিপ"

#: harddrake/data.pm:88 install_any.pm:1661
#, c-format
msgid "Hard Disk"
msgstr "ডিস্ক"

#: harddrake/data.pm:97 install_any.pm:1662
#, c-format
msgid "CDROM"
msgstr "সিডিরম"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "সিডি/ডিভিডি রাইটিং সফ্টওয়্যার"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "ডিভিডি-রোম"

#: harddrake/data.pm:127 standalone/drakbackup:2036
#, c-format
msgid "Tape"
msgstr "টেপ"

#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "ভিডিওকার্ড"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "টিভিকার্ড"

#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "অন্যান্য মাল্টিমিডিয়া ডিভাইস সমূহ"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "সাউন্ডকার্ড"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "ওয়েব ক্যামেরা"

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "প্রসেসর"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN এডোপ্টার সমূহ"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""

#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "ইথারনেটকার্ড"

#: harddrake/data.pm:282 network/netconnect.pm:479
#, c-format
msgid "Modem"
msgstr "মডেম"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "ADSL এডোপ্টার সমূহ"

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "মেমরি"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "AGP কন্ট্রোলার সমূহ"

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:984
#, c-format
msgid "Printer"
msgstr "প্রিন্টার"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "জয়ষ্টিক"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "SATA কন্ট্রলারসমূহ"

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "RAID কন্ট্রলারসমূহ"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA কন্ট্রলারসমূহ"

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Firewire কন্ট্রলারসমূহ"

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA কন্ট্রলারসমূহ"

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "SCSI কন্ট্রলারসমূহ"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "ইউএসবি কন্ট্রলারসমূহ"

#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "ইউএসবি পোর্টসমূহ"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "SMBus কন্ট্রলারসমূহ"

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "ব্রীজ এবং সিস্টেম কন্ট্রোলার সমূহ"

#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117
#: install_steps_interactive.pm:944 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "কি-বোর্ড"

#: harddrake/data.pm:460
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977
#, c-format
msgid "Mouse"
msgstr "মাউস"

#: harddrake/data.pm:483
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:492
#, c-format
msgid "Scanner"
msgstr "স্কেনার"

#: harddrake/data.pm:502 standalone/harddrake2:441
#, c-format
msgid "Unknown/Others"
msgstr "অজানা/অন্যান্য"

#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr "সিপিউ #"

#: harddrake/sound.pm:190 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "অনুগ্রহ করে অপেক্ষা করুন.... কনফিগারেশন প্রস্তাব করা হচ্ছে"

#: harddrake/sound.pm:226
#, c-format
msgid "No alternative driver"
msgstr "কোন বিকল্প ড্রাইভার নেই"

# বিকল্প
#: harddrake/sound.pm:227
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"আপনার সাউন্ড কার্ড (%s) যা আপনি বর্তমানে ব্যবহার \"%s\" করছেন তার জন্য পরিচিত অন্য "
"কোন OSS/ALSA কোন ড্রাইভার নেই"

#: harddrake/sound.pm:233
#, c-format
msgid "Sound configuration"
msgstr "সাউন্ড কনফিগারেশন"

#: harddrake/sound.pm:235
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"এখানে আপনি আপনার সাউন্ড কার্ডের (%s) জন্য বিকল্প ড্রাইভার (হয় OSS অথবা ALSA) পছন্দ "
"করতে পারেন।"

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:240
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"আপনি বর্তমানে %s\"%s\" ড্রাইভার ব্যবহার করছেন (আপনার সাউন্ড কার্ডের স্বাভাবিক "
"ড্রাইভার \"%s\")"

#: harddrake/sound.pm:242
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) ছিল প্রথম সাউন্ড API. এটা হচ্ছে একটি ওএস স্বাধীন সাউন্ড "
"API (এটা বেশিরভাগ UNIX(tm) সিস্টেমে পাওয়া যায়) কিন্তু এটা খুব সাধারণ এবং "
"স্বল্পসংখ্যক API.\n"
"নতুন আর কি, OSS ড্রাইভার সব চাকা নতুন করে তৈরি করে।\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) হচ্ছে একটি নিয়ন্ত্রিত আর্কিটেকচার যা\n"
"ISA, ইউএসবি এবং PCI cards এর একটি বড় সীমা সমর্থন করে।\n"
"\n"
"এটা OSS এর চেয়ে বেশি API প্রদান করে\n"
"\n"
"alsa ব্যবহার করতে, একজন ব্যবহার করতে পারে:\n"
"- পুরাতন সমর্থিত OSS api\n"
"- নতুন ALSA api যা অনেক সুবিধা প্রদান করে কিন্তু ALSA লাইব্রেরী কতৃক ব্যবহৃত।\n"

#: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "ড্রাইভার"

#: harddrake/sound.pm:261
#, c-format
msgid "Trouble shooting"
msgstr "ট্রাবল শুটিং"

#: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078
#: network/ndiswrapper.pm:95 network/netconnect.pm:458
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310
#: standalone/drakTermServ:325 standalone/drakTermServ:1135
#: standalone/drakTermServ:1196 standalone/drakTermServ:1861
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:969
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:478
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "নোটিশ"

#: harddrake/sound.pm:269
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"পুরাতন \"%s\" ড্রাইভার কালো তালিকা ভুক্ত।\n"
"\n"
"এটি কার্ণেল আনলোড করার সময় oops কে রিপোর্ট করে।\n"
"\n"
"নতুন \"%s\" শুধুমাত্র পরবর্তী বুটস্ট্র্যাপে ব্যবহৃত হবে।"

#: harddrake/sound.pm:277
#, c-format
msgid "No open source driver"
msgstr "কোন ওপেন সোর্স ড্রাইভার নেই"

#: harddrake/sound.pm:278
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"আপনার সাউন্ড কার্ডের (%s) জন্য কোন ফ্রী ড্রাইভার নেই, কিন্তু একটি অংশিদারী ড্রাইভার "
"\"%s\"-এ আছে।"

#: harddrake/sound.pm:281
#, c-format
msgid "No known driver"
msgstr "কোন পরিচিত ড্রাইভার নেই"

#: harddrake/sound.pm:282
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "আপনার সাউন্ড কার্ড (%s)-এর জন্য কোন পরিচিত ড্রাইভার নেই"

#: harddrake/sound.pm:286
#, c-format
msgid "Unknown driver"
msgstr "অপরিচিত ড্রাইভার"

#: harddrake/sound.pm:287
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "ভুল: আপনার সাউন্ড কার্ডের \"%s\" ড্রাইভারটি তালিকায় নেই"

#: harddrake/sound.pm:301
#, c-format
msgid "Sound trouble shooting"
msgstr "সাউন্ড ট্রাবল শুটিং"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:304
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"ক্লাসিক বাগ সাউন্ড পরীক্ষক নিম্নলিখিত কমান্ডগুলো চালু করে:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" ডিফল্টভাবে আপনার কার্ড যেই ড্রাইভার \n"
"ব্যবহার করছে তা আপনাকে বলবে\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" আপনার বর্তমানে ব্যবহৃত \n"
"ড্রাইভারের কথা বলবে\n"
"\n"
"- \"/sbin/lsmod\" যদি এর মডিউল (ড্রাইভার) লোড হয় বা না হয় তবে সে ব্যাপারে "
"পরীক্ষা \n"
"করতে আপনাকে সক্রিয় করে তুলবে\n"
"\n"
"- \"/sbin/chkconfig --list sound\" এবং \"/sbin/chkconfig --list alsa\" যদি\n"
"সাউন্ড এবং alsa সার্ভিসগুলো initlevel 3 তে চলার জন্য কন্‌ফিগার করা থাকে তাহলে \n"
"আপনাকে বলবে\n"
"\n"
"- \"aumix -q\" যদি সাউন্ড বন্ধ থাকে বা না থাকে তাহলে আপনাকে বলবে\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" কোন প্রোগ্রাম সাউন্ড কার্ড ব্যবহার করছে সেটা বলবে\n"

#: harddrake/sound.pm:330
#, c-format
msgid "Let me pick any driver"
msgstr "আমাকে যেকোন ড্রাইভার নিতে দাও"

#: harddrake/sound.pm:333
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "ইচ্ছেমত ড্রাইভার পছন্দ"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:336
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"আপনি যদি মনে করেন যে কোন ড্রাইভার আপনার কার্ডের জন্য ঠিক হবে\n"
"তাহলে উপরের লিষ্ট থেকে আপনি একটি পছন্দ করে নিতে পারেন।\n"
"\n"
"আপনার \"%s\"-এর বর্তমান ড্রাইভার \"%s\""

#: harddrake/v4l.pm:12 standalone/net_applet:73 standalone/net_applet:74
#: standalone/net_applet:76
#, c-format
msgid "Auto-detect"
msgstr "সয়ং-সনাক্ত"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "অজানা|সাধারণ"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "অজানা|CPH05X (bt878) [প্রচুর প্রস্তুতকারক]"

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "অজানা|CPH06X (bt878) [প্রচুর প্রস্তুতকারক]"

#: harddrake/v4l.pm:392
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"বেশিরভাগ আধুনিক টিভি কার্ডের ক্ষেত্রেই GNU/Linux -এর bttv মডিউল সঠিক প্যারামিটার "
"সয়ং সনাক্ত করে।\n"
"যদি আপনার কার্ড সনাক্ত না হয়, আপনি জোর করে এই কার্ডের জন্য সঠিক টিউনার এবং "
"কার্ডের ধরণ এখানে জোর করে দিতে পারেন। যদি প্রয়োজন হয় তাহলে শুধু আপনার কার্ডের "
"প্যারামিটার নির্বাচন করুন।"

#: harddrake/v4l.pm:395
#, c-format
msgid "Card model:"
msgstr "কার্ড মডেল:"

#: harddrake/v4l.pm:396
#, c-format
msgid "Tuner type:"
msgstr "টিউনারের ধরণ:"

#: harddrake/v4l.pm:397
#, c-format
msgid "Number of capture buffers:"
msgstr "ক্যাপচার বাফারের সংখ্যা:"

#: harddrake/v4l.pm:397
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "mmap'ed ক্যাপচারের জন্য ক্যাপচার বাফারের সংখ্যা"

#: harddrake/v4l.pm:399
#, c-format
msgid "PLL setting:"
msgstr "PLL সেটিং:"

#: harddrake/v4l.pm:400
#, c-format
msgid "Radio support:"
msgstr "রেডিও সাপোর্ট:"

#: harddrake/v4l.pm:400
#, c-format
msgid "enable radio support"
msgstr "রেডিও সাপোর্ট সক্রিয় করো"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"চালিয়ে যাওয়ার আগে, লাইসেন্সের শর্তগুলো আপনার সাবধানতার পড়া উচিত। এটা সম্পূর্ণ\n"
"ম্যান্ড্রিব লিনাক্স ডিস্ট্রিবিউশন পূর্ণ করে। যদি আপনি এখানকার সব শর্তের সাথে একমত \n"
"থাকেন, \"%s\" বাক্সটি চেক্‌ করুন। যদি না হয়, তাহলে \"%s\" বাটনে ক্লিক \n"
"করলে আপনার কম্পিউটার রিবুট হবে।"

#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "গ্রহণ"

# সাম: 
# \"shell\" = ?
# bash
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux একটি বহু‌-ব্যবহারকারী সিস্টেম যেখানে প্রতিটি ব্যবহারকারী নিজস্ব পছন্দ ও\n"
"ফাইলসমূহ আলাদাভাবে রক্ষণাবেক্ষণ করতে পারে। কিন্ত এসব সংযোজিত ব্যবহারকারীরা,\n"
"\"root\"‌ (যে কিনা সিস্টেম অ্যাডমিনিস্ট্রেটর) এর মত, তাদের নিজস্ব ফাইল ও "
"কনফিগারেশন\n"
"ছাড়া অন্য কিছু বদলাতে অনুমোদিত নয়। এটি সিস্টেমকে অনিচ্ছাকৃত বা অস্বাভাবিক পরিবর্তন "
"থেকে রক্ষা করে,\n"
"যা কিনা সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে। আপনাকে নিজের জন্য অন্তত একটি সাধারণ "
"ব্যবহারকারী\n"
" তৈরী করতে হবে -- যে অ্যাকাউন্টটি আপনি নিয়মিত কাজের জন্য ব্যবহার করবেন। যদিও "
"\"root\"\n"
" হিসেবে লগ ইন করে সব কাজই করা সম্ভব, এটি বিপদজনকও বটে! একটি ছোটখাটো ভুলের "
"কারণে\n"
" আপনার সম্পূর্ণ সিস্টেম অচল হয়ে যেতে পারে। একজন সাধারণ  ব্যবহারকারী খুব বড় ভুল "
"করলেও হয়ত\n"
" কিছু তথ্য হারাতে পারে তবে সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে না।\n"
"\n"
"প্রথম ক্ষেত্রটিতে একটি আসল নাম দিন। তবে এটি অত্যাবশ্যকীয় নয় -- আপনি অন্য কিছুও "
"লিখতে\n"
"পারেন। DrakX, এর প্রথম শব্দটি নিয়ে \"%s\" এ কপি করবে, যা দিয়ে কিনা এই "
"ব্যবহারকারী\n"
"সিস্টেমে লগ ইন করবে। প্রয়োজন হলে আপনি ডিফল্ট নামটি বদল করতে পারেন। এরপর আপনাকে\n"
"একটি পাসওয়ার্ড দিতে হবে। নিরাপত্তার দৃষ্টিকোণ থেকে সাধারণ ব্যবহারকারীর পাসওয়ার্ড, "
"\"root\" এর\n"
"পাসওয়ার্ডের মত জরুরী নয় তবে এটিকে খালি রাখা বা সহজ পাসওয়ার্ড দেয়া উচিত নয়, কারণ "
"এতে\n"
"আপনার ফাইলসমূহ অরক্ষিত থেকে যায়।\n"
"\n"
"\"%s\" তে ক্লিক করার পর আপনি আরও ব্যবহারকারী তৈরী করতে পারেন। আপনার পরিবারের\n"
"সদস্য ও বন্ধুদের জন্য আলাদা আলাদা একাউন্ট তৈরী করুন। শেষ হলে \"%s\" ক্লিক করুন।\n"
"\n"
"\"%s\" বাটনে ক্লিক করে আপনি একজন ব্যবহারকারীর ডিফল্ট \"শেল\" বদল করতে পারেন\n"
"(ডিফল্ট মান bash)।\n"
"\n"
"সব ব্যবহারকারী তৈরীর পর আপনাকে একটি বেছে নিতে হবে যা কিনা কম্পিউটার বুট করার "
"পর\n"
"স্বয়ংক্রিয়ভাবে লগইন হবে। আপনি যদি এই ফিচারে আগ্রহী হন(এবং স্থানীয় নিরাপত্তা নিয়ে "
"বিচলিত\n"
"না হন), তবে পছন্দনুযায়ী ব্যবহারকারী ও উইন্ডো ম্যানেজার নির্বাচন করুন এবং \"%s\" "
"টিতে ক্লিক\n"
"করুন। অন্যথায় \"%s\" চেকবক্সটি আনচেক করুন।"

#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "ইউজারের নাম"

# পরবর্তি 
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321
#: network/thirdparty.pm:323 printer/printerdrake.pm:3678
#: standalone/drakTermServ:382 standalone/drakbackup:3940
#: standalone/drakbackup:4034 standalone/drakbackup:4051
#: standalone/drakbackup:4069 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "পরবর্তী"

#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?"

# সাম:
# secondary = সহকারী?
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"আপনার হার্ড ড্রাইভে বর্তমানে নিম্নলিখিত লিনাক্স পার্টিশনগুলো বিদ্যমান।\n"
"আপনি উইজার্ড কর্তৃক বাছাইকৃত সেটিংসমূহ রাখতে পারেন কারণ বেশীরভাগ\n"
"সাধারণ ইনস্টলেশনের ক্ষেত্রে এটিই যথেষ্ট। যদি পরিবর্তন করতে চান, আপনাকে অন্তত একটি\n"
"রুট পার্টিশন তৈরী করতে হবে (\"/\")। পার্টিশনের সাইজ খুব ছোট না হওয়া জরুরী, কারন\n"
"অন্যথা আপনি যথেষ্ট সফ্টওয়্যার ইনস্টল করতে পারবেন না। আপনার তথ্যসমূহ আলাদা\n"
"পার্টিশনে রাখতে চাইলে, আপনাকে আরও একটি \"/home\" পার্টিশন তৈরী করতে হবে\n"
"(যা কিনা একাধিক লিনাক্স পার্টিশন থাকলেই সম্ভব)।\n"
"\n"
"পার্টিশনগুলো তালিকায় এভাবে দেখানো হয়েছে: \"নাম\", \"ধারণক্ষমতা\".\n"
"\n"
"\"নাম\" এর কাঠামো হচ্ছে: \"হার্ড ড্রাইভের ধরন\", \"হার্ড ড্রাইভ নাম্বার\",\n"
"\"পার্টিশন নাম্বার\" (যেমন, \"hda1\").\n"
"\n"
"যদি আপনার হার্ড ড্রাইভটি IDE হার্ড ড্রাইভ হলে \"হার্ড ড্রাইভের ধরন\" হবে \"hd\", "
"আর\n"
" SCSI হার্ড ড্রাইভ হলে হবে \"sd\"।\n"
"\n"
"\"হার্ড ড্রাইভ নাম্বার\", হচ্ছে \"hd\" বা \"sd\" এর পরের একটি অক্ষর। IDE হার্ড "
"ড্রাইভের\n"
"জন্য:\n"
"\n"
" * \"a\" অর্থ \"প্রাথমিক IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
"\n"
" * \"b\" অর্থ \"প্রাথমিক IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\";\n"
"\n"
" * \"c\" অর্থ \"সহকারী IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
"\n"
" * \"d\" অর্থ \"সহকারী IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\".\n"
"\n"
"SCSI হার্ড ড্রাইভের জন্য, \"a\" অর্থ \"সর্বনিম্ন SCSI ID\", \"b\" অর্থ\n"
"\"দ্বিতীয় সর্বনিম্ন SCSI ID\", ইত্যাদি।"

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"ম্যান্ড্রিব লিনাক্স ইনস্টলেশন কয়েকটি সিডি'তে ভাগ করা থাকে। যদি একটি চিহ্নিত "
"প্যাকেজ\n"
"অন্য সিডি'তে থেকে থাকে, তাহলে DrakX বর্তমান সিডি'টি বের করে দেয় এবং "
"প্রয়োজনীয়টি\n"
"প্রবেশ করাতে জিজ্ঞেস করে। যদি এরকম অনুরোধ না আসে, তাহলে \"%s\" তে ক্লিক করুন,\n"
"যথাযথ প্যাকেজগুলো ইনস্টল হবে না।"

# সাম: 
# documentation = ডকুমেন্টেশন
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"এখন আপনাকে নির্বাচন করতে হবে আপনি কোন কোন প্রোগ্রাম সিস্টেমে ইনস্টল করতে চান।\n"
"Mandriva Linux এর জন্য কয়েক হাজার প্যাকেজ রয়েছে, এবং ব্যাবস্থাপনার সুবিধার্থে "
"সেগুলোকে\n"
"অ্যাপ্লিকেশনের ধরন অনুযায়ী ভাগ করা হয়েছে।\n"
"\n"
"Mandriva Linux সব প্যাকেজগ্রুপসমূহ চারটি শ্রেণীতে ভাগ করে। আপনি বিভিন্ন শ্রেণীর\n"
"অ্যাপ্লিকেশনমিলিয়ে ও মিশিয়ে ইনস্টল করতে পারেন, যেমন একটি ``Workstation''\n"
"ইনস্টলেশনে আপনি ''Server'' শ্রেণী থেকে অ্যাপ্লিকেশন ইনস্টল\n"
"করতে পারেন।\n"
"\n"
" * \"%s\": আপনি যদি আপনার মেশিনটি ওয়ার্কস্টেশন হিসেবে ব্যবহার করতে চান, "
"Workstation''\n"
"শ্রেণী থেকে এক বা একাধিক গ্রুপ নির্বাচন করুন।\n"
"\n"
" * \"%s\": আপনি যদি আপনার মেশিনটি প্রোগ্রামিংএর জন্য ব্যবহার করতে চান, সে "
"অনুযায়ী\n"
"গ্রুপ নির্বাচন করুন। \"LSB\" নামের বিশেষ গ্রুপটি আপনার সিস্টেমকে এমনভাবে\n"
"কনফিগার করবে যাতে তা Linux Standard Base স্পেসিফিকেশনের সাথে যতদূর\n"
"সম্ভব সামঞ্জস্য বজায় রাখে।\n"
"\n"
"\"LSB\" গ্রুপটি নির্বাচন করলে, ডিফল্ট \"2.6\" কার্নেল সিরিজের বদলে\n"
"\"2.4\" সিরিজটি ইনস্টল হবে। এটি করা হয় সিস্টেমকে 100%%-LSB সামঞ্জস্যপূর্ণ\n"
"করার জন্য। তবে, আপনি \"LSB\" গ্রুপটি নির্বাচন না করলেও আপনার সিস্টেম প্রায়\n"
"100%%-LSB সামঞ্জস্যপূর্ণ হবে।\n"
"\n"
"* \"%s\": আপনার মেশিনটি যদি সার্ভার হিসেবে ব্যবহৃত হয়, আপনার মেশিনে কোন সাধারন\n"
" সার্ভিসসমূহ ইনস্টল করতে চান তা  নির্বাচন করুন।\n"
"\n"
" * \"%s\": এখানে আপনার পছন্দ অনুযায়ী গ্রাফিক্যাল প্রতিবেশ নির্বাচন\n"
"করুন। আপনি যদি গ্রাফিক্যাল ইন্টারফেস ব্যবহার করতে চান, অন্তত একটি অবশ্যই\n"
"নির্বাচন করতে হবে।\n"
"\n"
"কোন গ্রুপ নামের উপর মাউস কার্সার রাখলে ঐ গ্রুপ সম্পর্কে টীকা প্রদর্শিত হবে।\n"
"\n"
"আপনি \"%s\" বক্সটি চেক করতে পারেন, যা কিনা প্রয়োজনীয় যদি আপনি প্যাকেজগুলো\n"
"সম্পর্কে পরিচিত হন বা কোন কোন প্যাকেজ ইনস্টল হবে তা সম্পূর্ণভাবে নিয়ন্ত্রন\n"
"করতে চান।\n"
"\n"
"\"%s\" মোডে ইনস্টলেশন শুরু করলে, আপনি সব গ্রুপ ডিসিলেক্ট করে নতুন প্যাকেজ\n"
"ইনস্টলেশন বাতিল করতে পারেন। এটি একটি বিদ্যমান সিস্টেম মেরামত ও আপডেট\n"
"করার জন্য প্রযোজ্য।\n"
"\n"
"আপনি যদি একটি সাধারণ ইনস্টলেশনের ক্ষেত্রে (আপগ্রেড নয়), সব গ্রুপ\n"
"ডিসিলেক্ট করে থাকেন, তবে একটি পপআপ ডায়ালগে সর্বনিম্ন ইনস্টলেশনের কিছু\n"
"অপশন পরামর্শ করা হবে:\n"
"\n"
"* \"%s\": একটি সক্রিয় গ্রাফিক্যাল ডেস্কটপের জন্য প্রয়োজনীয় সর্বনিম্ন প্যাকেজ ইনস্টল "
"কর।\n"
"\n"
"* \"%s\": মূল সিস্টেম, প্রাথমিক ইউটিলিটিসমূহ ও তাদের ডকুমেন্টেশন ইনস্টল করে। এই "
"ইনস্টলেশনটি সার্ভার সেটআপ করার জন্য উপযুক্ত।\n"
"\n"
"* \"%s\": একটি সক্রিয় Linux সিস্টেমের জন্য জরুরী সর্বনিম্ন সংখ্যক প্যাকেজ ইনস্টল করে। "
"এ\n"
" ইনস্টলেশনে আপনি শুধু একটি কমান্ড লাইন ইন্টারফেস পাবেন। ইনস্টলেশনে মোট সাইজ প্রায় "
"৬৫\n"
" মেগাবাইট।"

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "ওয়ার্কষ্টেশন"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "ডেভলপমেন্ট"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "গ্রাফিকাল পরিবেশ"

#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "আলাদাভাবে প্যাকেজ নির্বাচন"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "আপগ্রেড"

#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "X-এর সাথে"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "সাধারণ ডকুমেন্টেশন"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "এক্কেবারেই সল্প ইনস্টলেশন"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:899
#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:308 standalone/net_applet:295
#: ugtk2.pm:907 wizards.pm:156
#, c-format
msgid "No"
msgstr "না"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:899 interactive.pm:157
#: modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:307
#: standalone/net_applet:299 ugtk2.pm:907 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "হ্যাঁ"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "সয়ংক্রিয় নির্ভরতা"

# sam
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": \"%s\" বাটনে ক্লিক করলে প্রিন্টার কনফিগারেশন উইজার্ড খুলবে।\n"
"প্রিন্টার কনফিগারেশন সম্বন্ধে আরো জানতে, \"স্টার্টার গাইড\" এর যথাযথ\n"
"অধ্যায়ের পরামর্শ নিন। আমাদের সহায়িকাতে দেখানো ইন্টারফেসটি, ইনস্টলেশনে\n"
"ব্যবহৃত ইন্টারফেসের অনুরুপ। "

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2327 standalone/drakbackup:2331
#: standalone/drakbackup:2335 standalone/drakbackup:2339
#, c-format
msgid "Configure"
msgstr "কনফিগার"

# সাম
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"এই ডায়ালগটি আপনি বুট করার সময় কি কি সার্ভিস শুরু করতে চান তা নির্বাচন করার জন্য।\n"
"\n"
"DrakX বর্তমান ইনস্টলেশনে বিদ্যমান সব সার্ভিস দেখাবে। প্রতিটি সার্ভিস ভালভাবে দেখুন "
"এবং\n"
"বুটের সময় যেগুলো প্রয়োজন না হয়, সেগুলো আনচেক করুন।\n"
"\n"
"একটি সার্ভিস নির্বাচন করলে, সার্ভিসটি সম্পর্কে সংক্ষিপ্ত তথ্য প্রদর্শিত হবে। আপনি যদি "
"কোন সার্ভিসের\n"
"আবশ্যকতা সম্পর্কে নিশ্চিত না হন তবে ডিফল্ট মানে রেখে দেয়াই নিরাপদ।\n"
"\n"
"!! আপনি আপনার মেশিন সার্ভার হিসেবে ব্যবহার করতে চাইলে খুব সাবধান থাকবেন: আপনি "
"অবশ্যই\n"
"কোন অবাঞ্ছনীয় সার্ভিস চালু করতে চান না কারন কিছু সার্ভিস সার্ভারে সক্রিয় করাটা "
"বিপদজনক।\n"
"এক কথায়, শুধু সেসব সার্ভিসই চালু করুন যেসব আপনার প্রয়োজন। !!"

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:879
#, c-format
msgid "Hardware clock set to GMT"
msgstr "হার্ডওয়্যারে ঘড়ি GMT-এ সেট করা"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "সয়ংক্রিয় সময় মেলানো"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"গ্রাফিক কার্ড\n"
"\n"
"   সাধারণত ইনস্টলার আপনার মেশিনে ইনস্টলকৃত গ্রাফিক কার্ড স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
"এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই কার্ড\n"
"আপনি ইনস্টল করেছেন সেটা বেছে নিতে পারবেন।\n"
"\n"
"   এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
"আপনাকে জিজ্ঞেস করা হবে।"

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"মনিটর\n"
"\n"
"   সাধারণত ইনস্টলার আপনার মেশিনে সংযুক্ত মনিটর স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
"এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই মনিটর\n"
"আপনার কম্পিউটারে সংযুক্ত করেছেন সেটা বেছে নিতে পারবেন।"

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"রেজ্যুলুশন\n"
"\n"
"   এখানে আপনার গ্রাফিক্‌স হার্ডওয়্যারের রেজ্যুলুশন এবং রংয়ের গভীরতা বেছে নিতে \n"
"পারেন। আপনার প্রয়োজনের সাথে যেটি সবচেয়ে ভাল হয় তার যেকোন একটি বেছে নিন\n"
"(ইনস্টলেশনের পর আপনি তা পরিবর্তন করতে সমর্থ হবেন)। বেছে নেয়া কন্‌ফিগারেশনের\n"
"নমুনা মনিটরের ছবিতে দেখানো হচ্ছে।"

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
"আপনাকে জিজ্ঞেস করা হবে।"

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"অপশন\n"
"\n"
"   এই ধাপগুলো বুট করার সময় স্বয়ংক্রিয়ভাবে আপনি যেখানে আপনার মেশিনের গ্রাফিকাল\n"
"ইন্টারফেস বাছাই করার অনুমতি পাবেন। সুস্পষ্টভাবেই, যদি আপনার মেশিনকে একটি সার্ভার "
"হিসেবে\n"
"ব্যবহার করতে চান, তাহলে আপনি \"%s\" দিয়ে পরীক্ষা করে নিতে পারেন, অথবা যদি "
"আপনি\n"
"সফলভাবে ডিসপ্লে কন্‌ফিগার করতে না পারেন।"

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "শুণ্য স্থান ব্যবহার করো"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "উপস্থিত পার্টিশন ব্যবহার করো"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "উইন্ডোজ পার্টিশনের খালি জায়গা ব্যবহার করে"

#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "সম্পূর্ণ ডিস্ক মুছে ফেলো"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "উইন্ডোজ সরাও"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "হাতে হাতে ডিস্ক পার্টিশন"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "সয়ংক্রিয়-ইনস্টল ফ্লপি তৈরী করো"

#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Replay"
msgstr "জবাব"

#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Automated"
msgstr "সয়ংক্রিয়ভাবে"

#: help.pm:409 install_steps_interactive.pm:1333
#, c-format
msgid "Save packages selection"
msgstr "প্যাকেজের নির্বাচন সংরক্ষণ করে রাখো"

# সাম
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"আপনি যদি পুরানো GNU/Linux পার্টিশন আবার ব্যবহার করতে চান, আপনি হয়ত কোন পার্টিশন "
"নতুন করে ফরম্যাট করে পুরানো তথ্য মুছে ফেলতে চাইবেন। এটি করতে হলে, ঐ পার্টিশনগুলোও "
"নির্বাচন করুন।\n"
"\n"
"মনে রাখবেন, সব পার্টিশন ফরম্যাট করা জরুরী নয়। যে পার্টিশনে অপারেটিং সিস্টেম থাকবে "
"(যেমন \"/\", \"/usr\" বা \"/var\") সেটি অবশ্যই ফরম্যাট করতে হবে কিন্তু যেসব "
"পার্টিশনের তথ্য আপনি সংরক্ষন করতে চান (সাধারনত \"/home\") সেগুলো ফরম্যাট করা "
"অত্যাবশ্যকীয় নয়।\n"
"\n"
"পার্টিশন নির্বাচন করতে সাবধানতা অবলম্বন করবেন। ফরম্যাট করলে নির্বাচিত পার্টিশনের "
"সব তথ্য মুছে যাবে এবং তা আর ফিরে পাওয়া যাবে না।\n"
"\n"
"পার্টিশন ফরম্যাট শুরু করতে \"%s\" চাপুন।\n"
"\n"
"আপনার নতুন Mandriva Linux অপারেটিং সিস্টেম ইনস্টেশনের জন্য আপনি যদি অন্য একটি "
"পার্টিশন নির্বাচন করতে, তবে \"%s\" ক্লিক করুন।\n"
"\n"
"যদি আপনি পার্টিশনের জন্য ডিস্কের খারাপ ব্লক সনাক্ত করাতে চান তাহলে \"%s\" ক্লিক "
"করুন।"

# আগে
#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433
#: interactive/newt.pm:318 printer/printerdrake.pm:3676
#: standalone/drakTermServ:361 standalone/drakbackup:3900
#: standalone/drakbackup:3939 standalone/drakbackup:4050
#: standalone/drakbackup:4065 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "পূর্ববর্তী"

# সাম
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"আপনি যখন Mandriva Linux ইনস্টল করবেন, সম্ভবত প্রথম রিলিজ থেকে কিছু\n"
"প্যাকেজ আপডেট হয়ে গেছে। কোন সাধারন বা নিরাপত্তা ত্রুটি সমাধান করা হয়েছে।\n"
"আপনাকে এই সুবিধাগুলি দেয়ার লক্ষ্যে এই আপডেটগুলো ইন্টারনেট থেকে ডাউনলোড\n"
"করার সুযোগ দেয়া হয়েছে। যদি আপনার সক্রিয় ইন্টারনেট সংযোগ থাকে, \"%s\" চেক\n"
"করুন, আর \"%s\" চেক করুন যদি আপাতত ইনস্টল করতে না চান।\n"
"\n"
"\"%s\" বাছাই করলে আপাকে কিছু ওয়েব লোকেশনের তালিকা দেয়া হবে যেখান থেকে\n"
"আপডেট পাওয়া যাবে। আপনি আপনার কাছের একটি লোকেশন পছন্দ করুন। এরপর\n"
"একটি প্যাকেজ নির্বাচন করার জন্য একটি  ট্রী দেখানো হবে। প্যাকেজগুলো দেখুন এবং\n"
"ডাউনলোড করে ইনস্টল করতে \"%s\" বাটন চাপুন। অথবা \"%s\" ক্লিক করে বের হয়ে আসুন।"

# ইনস্টল
#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:155 standalone/drakbackup:4097
#, c-format
msgid "Install"
msgstr "ইনস্টল"

# সাম
# নিরাপত্তা স্তর
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"এই সময়ে DrakX আপনার মেশিনের জন্য আপনার ইচ্ছানুযায়ী নিরাপত্তা স্তর\n"
"বেছে নেয়ার সুযোগ দেবে। সাধারন নিয়ম অনুযায়ী, যদি একটি মেশিনে জরুরী\n"
"তথ্য থাকে বা মেশিনটি ইন্টারনেটে সংযুক্ত থাকে তবে নিরাপত্তা বাড়িয়ে দেয়া\n"
"হয়। নিরাপত্তা যত বেশী, ব্যবহারের স্বাচ্ছন্দ্য তত কমে যায়।\n"
"\n"
"আপনি যদি নিশ্চিত না হন কোন অপশনটি রাখবেন তবে ডিফল্ট অপশনটিই রাখুন।\n"
"পরবর্তীতে আপনি এটি draksec টুল (যেটি Mandriva Linux নিয়ন্ত্রন কেন্দ্রের একটি অংশ)\n"
"দিয়ে পরিবর্তন করতে পারবেন।\n"
"\n"
"\"%s\" ক্ষেত্রটিতে যিনি নিরাপত্তার দায়িত্বে নিয়োজিত তার ই-মেইল অ্যাড্রেস দিন।\n"
"নিরাপত্তা বিষয়ক বার্তাগুলো এই অ্যাড্রেসে পাঠানো হবে। "

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "সিকিউরিটি এ্যডমিনিস্ট্রেটর"

# সাম
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"এই সময়ে আপনাকে Mandriva Linux যে পার্টিশনে ইনস্টল হবে তা নির্বাচন\n"
"করতে হবে। যদি আগে থেকেই পার্টিশন তৈরী থাকে, (GNU/Linux এর পুর্বের\n"
"কোন ইনস্টলেশনের কারনে বা অন্য কোন পার্টিশন টুল দিয়ে তৈরী করা) আপনি\n"
"সেগুলো ব্যবহার করতে পারেন। অন্যথায় হার্ডড্রাইভ পার্টিশন তৈরী করতে হবে।\n"
"\n"
"পার্টিশন তৈরী করতে প্রথমে একটি হার্ডড্রাইভ নির্বাচন করুন। প্রথম পার্টিশন\n"
"নির্বাচনের জন্য \"hda\", দ্বিতীয় পার্টিশনের জন্য \"hdb\", প্রথম SCSI ড্রাইভের\n"
"জন্য \"sda\" ইত্যাদি ক্লিক করুন।\n"
"\n"
"নির্বাচিত ড্রাইভটি পার্টিশন করতে নিম্নলিখিত অপশনসমূহ ব্যবহার করুন:\n"
"\n"
" * \"%s\": এই অপশনটি  নির্বাচিত ড্রাইভের সব পার্টিশন মুছে দিবে\n"
"\n"
" * \"%s\": এই অপশনটি  আপনার হার্ডড্রাইভের খালি অংশে স্বয়ংক্রিয়ভাবে ext3 এবং\n"
"swap পার্টিশন তৈরী করতে দিবে।\n"
"\n"
"\"%s\": আরও ফিচার ব্যবহার করার সুযোগ দেয়:\n"
"\n"
" * \"%s\": পার্টিশন টেবিলটি ফ্লপিতে সংরক্ষন করে যা কিনা পরবর্তীতে পার্টিশন\n"
"টেবিল উদ্ধার করতে কাজে লাগে। এটি খুবই গুরুত্বপুর্ণ একটি ধাপ যেটি আপনার\n"
"করা উচিত।\n"
"\n"
" * \"%s\": ফ্লপি ডিস্কে সংরক্ষিত পার্টিশন টেবিল এনে তা পুর্বাবস্থায় ফিরিয়ে নেয়।\n"
"\n"
" * \"%s\": আপনার পার্টিশন টেবিল নষ্ট হলে আপনি এই অপশনটি দিয়ে তা মেরামত\n"
"করার চেষ্টা করতে পারেন। অনুগ্রহ করে সাবধানতা অবলম্বন করবেন এবং মনে রাখবেন\n"
"এই প্রক্রিয়া সবসময় সফল নাও হতে পারে।\n"
"\n"
" * \"%s\": সব পরিবর্তন বাতিল করে দিয়ে হার্ডড্রাইভের পুর্বের মূল পার্টিশন টেবিল লোড "
"করে।\n"
"\n"
" * \"%s\": এই অপশনটি অনির্বাচিত করলে, ব্যবহারকারীদের রিমুভেবল মাধ্যম যেমন\n"
"ফ্লপি এবং CD-ROM নিজে নিজে মাউন্ট/আনমাউন্ট করার প্রায়োজন পরবে।\n"
"\n"
" * \"%s\": এই অপশনটি ব্যবহার করুন যদি হার্ডড্রাইভ পার্টিশন আপনি উইজার্ডের\n"
"মাধ্যমে করতে চান। পার্টিশন সম্বন্ধে ভাল ধারনা না থাকলে এই অপশনটি পরামর্শনীয়।\n"
"\n"
" * \"%s\": এই অপশনটি ব্যবহার করে পরিবর্তনগুলো বাতিল করুন।\n"
"\n"
" * \"%s\": আপনার পার্টিশনে আরও কিছু কাজ (ধরন, অপশন ফরম্যাট) করার অপশন\n"
"দেয় ও হার্ডড্রাইভ সম্পর্কে আরও তথ্য দেয়।\n"
"\n"
" * \"%s\": পার্টিশন করা শেষ হলে এই অপশন আপনার সেটিংগুলো ডিস্কে সংরক্ষণ করবে।\n"
"\n"
"পার্টিশনের সাইজ ঠিক করতে আপনি কীবোর্ডের তীর চিহ্নিত কীগুলো ব্যবহার করতে পারেন।\n"
"\n"
"দ্রষ্টব্য: আপনি যেকোন অপশন কীবোর্ড দিয়ে নির্বাচন করতে পারেন। পার্টিশন নির্বাচন\n"
"করতে [Tab] এবং [Up/Down] তীর চিহ্নগুলো ব্যবহার করুন।\n"
"\n"
"যখন একটি পার্টিশন নির্বাচন অবস্থায় আছে, আপনি নিম্নলিখিত কীগুলো ব্যবহার করতে "
"পারেন:\n"
"\n"
" * Ctrl-c নতুন পার্টিশন তৈরী করার জন্য (যখন একটি খালি পার্টিশন নির্বাচন করা "
"হয়েছে)\n"
"\n"
" * Ctrl-d একটি পার্টিশন মুছে দিতে\n"
"\n"
" * Ctrl-m মাউন্ট পয়েন্ট সেট করতে\n"
"\n"
"বিদ্যমান ফাইল সিস্টেমের ধরন সম্পর্কে জানতে হলে \"Reference Manual\" এর\n"
"ext2FS অধ্যায়টি পড়ুন।\n"
"\n"
"আপনি যদি PPC মেশিনে ইনস্টল করেন, তাহলে আপনাকে yaboot বুটলোডারের\n"
"ব্যবহারের জন্য একটি  ছোট অন্তত ১ এমবি এর HFS \"বুটস্ট্র্যাপ\" পার্টিশন তৈরী করতে "
"হবে।\n"
"আপনি যদি পার্টিশনটি আরও বড় করতে চান, যেমন ৫০ MB, আপনি কোন জরুরী বুট সমস্যার\n"
"জন্য একটি আলাদা কার্নেল এবং ramdisk তৈরী করে এই পার্টিশনে রাখতে পারেন।"

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "রিমুভযোগ্য মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "সাধারণ/দক্ষ মোডের মধ্যে পরিবর্তন"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": বর্তমান দেশ নির্বাচন পরীক্ষা করুন। আপনি যদি এই দেশের জন্য না হন,\n"
"তাহলে \"%s\" বাটনে ক্লিক করুন এবং অন্য একটি বেছে নিন। যদি আপনার দেশ\n"
"উল্লেখিত তালিকায় না থাকে, তাহলে \"%s\" বাটনে ক্লিক করে সম্পূর্ণ দেশের তালিকায় "
"পেয়ে যান।"

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""

# সাম
# ইনস্টলেশন
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"আপনার ভাষা নির্বাচনের উপর ভিত্তি করে, DrakX স্বয়ংক্রিয়ভাবে একটি কীবোর্ড\n"
"কনফিগারেশন বেছে নেবে। এই নির্চনটি বাঞ্ছনীয় কিনা দেখে নিন বা অন্য একটি\n"
"লেআউট পছন্দ করুন।\n"
"\n"
"আপনার ভাষার সাথে সম্পূর্ন মিলিয়ে কীবোর্ড আপনি নাও পেতে পারেন:\n"
"যেমন যদি আপনি ইংরেজী ভাষাভাষী একজন সুইস নাগরিক হন, আপনি সুইস কীবোর্ড\n"
"ব্যবহার করতে পারেন। কিন্তু আপনি যদি ইংরেজী ভাষী হয়ে Quebec এ বসবাস\n"
"করেন আপনার পরিস্থিতি এমন হতে পারে যেখানে country-set কীবোর্ড এবং\n"
"নিজস্ব ভাষা একই নয়। যেকোন ক্ষেত্রেই আপনি আপনি একটি তালিকা থেকে সঠিক\n"
"কীবোর্ডটি বেছে নিতে পারেন।\n"
"\n"
"সমর্থিত কীবোর্ডের তালিকা দেখতে \"%s\" বাটনে ক্লিক করুন।\n"
"\n"
"যদি আপনি নন‌-ল্যাটিন বর্ণমালার কীবোর্ডে লেআউট বাছাই করেন, পরবর্তী ডায়ালগটি\n"
"আপনাকে ল্যাটিন ও নন‌-ল্যাটিন কীবোর্ডের মধ্যে সুইচ করার জন্য একটি কী বাইন্ডিং\n"
"বাছাই করতে হবে।"

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "স্পেনীয়"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "চাকার বৈশিষ্ঠ অনুহকরণ"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Universal | যে কোন PS/2 এবং ইউএসবি মাউস"

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"সঠিক পোর্টটি নির্বাচন করুন। যেমন, উইন্ডোজের \"COM1\" পোর্টটি GNU/Linux-এ\n"
"\"ttyS0\" নামে পরিচিত।"

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "অনুমোদন"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

# সাম 
# emulate = এমুলেট?
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"এখন সময় আপনার কম্পিউটারের জন্য একটি প্রিন্টিং সিস্টেম নির্বাচন করার। অনান্য\n"
"অপারেটিং সিস্টেম আপনাকে একটি অপশন দিতে পারে কিন্তু Mandriva Linux দেবে দুটি।\n"
"প্রিন্টিং সিস্টেমগুলো বিভিন্ন কনফিগারেশনের জন্য প্রযোজ্য।\n"
"\n"
" * \"%s\" -- অর্থ হচ্ছে \"প্রিন্ট করো, সারিতে রাখবেনা\". এটি নির্বাচন করুন যদি "
"আপনার কোন\n"
"প্রিন্টারের সাথে সরাসরি সংযোগ থাকে, আপনি প্রিন্টার জ্যাম থেকে জরুরীভাবে বের হয়ে "
"যেতে\n"
"চান এবং যদি আপনার নেটওয়ার্ক প্রিন্টার না থাকে।(\"%s\" শুধুমাত্র খুবই সাধারন "
"নেটওয়ার্ক\n"
"সামলাতে পারে এবং কিছুটা ধীর হয়)। এটি আপনার GNU/Linux এর প্রথম অভিজ্ঞতা হলে\n"
"আপনার \"pdq\" ব্যবহার করাটাই শ্রেয়।\n"
"\n"
" * \"%s\" অর্থ \"সাধারন Unix প্রিন্টিং সিস্টেম\" এবং এটি আপনার স্থানীয় প্রিন্টার "
"হোক\n"
"বা পৃথিবীর অন্য প্রান্তে অবস্থিত কোন প্রিন্টারই হোক যেকোন ক্ষেত্রেই একটি উত্‍কৃষ্ট "
"সিস্টেম।\n"
"এটি কনফিগার করতে সহজ এবং পুরোনো \"lpd\" প্রিন্টিং সিস্টেমের জন্য সার্ভার বা "
"ক্লায়েন্ট\n"
"হিসেবে কাজ করতে পারে। অতএব এটি পুরানো অপারেটিং সিস্টেম যেগুলোর সার্ভিস প্রয়োজন\n"
"তাদের সাথেও সামঞ্জস্যপূর্ণ। যদিও খুব শক্তিশালী, মূল সেটআপটি প্রায় \"pdq\" এর মত "
"সহজ।\n"
"আপনি যদি \"lpd\" সার্ভার এমুলেট করতে চান, তবে \"cups-lpd\" daemon টি চালু করতে\n"
"ভুলবেন না। \"%s\" এর প্রিন্টার অপশন বাছাই করা ও প্রিন্টার ব্যবস্থাপনার জন্য একটি "
"গ্রাফিক্যাল\n"
"ইন্টারফেস রয়েছে।\n"
"\n"
"আপনার বাছাইকৃত প্রিন্টিং সিস্টেমটি যদি আপনার পরে পছন্দ না হয়,\n"
"তবে আপনি Mandriva Linux নিয়ন্ত্রন কেন্দ্র থেকে PrinterDrake চালিয়ে ও \"%s\" বাটন "
"ক্লিক\n"
"করে তা বদল করতে পারেন।"

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "দক্ষ"

# সাম
# check উচিত spelling, zwj didn't work for me... 
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX প্রথমে আপনার কম্পিউটারে বিদ্যমান IDE ডিভাইস সনাক্ত করবে। এটি আপনার\n"
"সিস্টেমে এক বা একাধিক PCI SCSI কার্ডের জন্যেও স্ক্যান করবে। যদি SCSI কার্ড পাওয়া\n"
"যায়, DrakX নিজে নিজেই সঠিক ড্রাইভারটি ইনস্টল করবে।\n"
"\n"
"যেহেতু হার্ডওয়্যার সনাক্তকরন কোন অব্যার্থ পক্রিয়া নয়, DrakX আপনার হার্ডড্রাইভ সনাক্ত\n"
"নাও করতে পারে। এ ক্ষেত্রে আপনাকে হার্ডওয়্যারটি নিজ হাতে নির্দিষ্ট করে দিতে হবে।\n"
"\n"
"PCI SCSI adapter নিজ হাতে নির্দিষ্ট করে দিতে হলে, DrakX আপনাকে জিজ্ঞাসা করবে\n"
"আপনি অপশন কনফিগার করতে চান কিনা। আপনার DrakX কে হার্ডওয়্যারটির নির্দিষ্ট কার্ডের\n"
"অপশনের জন্য প্রোব করতে দেয়া উচিত্‍ যা কিনা adapter ইনিশিয়ালাইজ করতে প্রয়োজন।\n"
"বেশীরভাগ ক্ষেত্রে DrakX এই কাজটি কোন ঝামেলা ছাড়াই সম্পন্ন করবে।\n"
"\n"
"DrakX যদি প্রোব করে হার্ডওয়্যারে পাঠানোর জন্য প্যারামিটারগুলো নির্ধারন করতে না "
"পারে\n"
"তাহলে আপনাকে তা নিজে হাতে কনফিগারেশন করতে হবে।\n"
" "

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": যদি আপনার সিস্টেমে একটি সাউন্ড কার্ড পাওযা যায়, সেটা এখানে দেখানো হবে।\n"
"যদি আপনি জানান যে আসলে এই সাউন্ড কার্ডটি আপনার সিস্টেমে উপস্থিত নেই, তাহলে আপনি\n"
"বাটনে ক্লিক করুন এবং অন্য একটি ড্রাইভার বেছে নিন।"

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1011
#: install_steps_interactive.pm:1028
#, c-format
msgid "Sound card"
msgstr "সাউন্ডকার্ড"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:970 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "টাইমজোন"

#: help.pm:855 install_steps_interactive.pm:1044
#, c-format
msgid "TV card"
msgstr "টিভি কার্ড"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "ISDN কার্ড"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "গ্রাফিকাল ইন্টারফেস"

#: help.pm:855 install_any.pm:1683 install_steps_interactive.pm:1062
#: standalone/drakbackup:2021
#, c-format
msgid "Network"
msgstr "নেটওয়ার্ক"

#: help.pm:855 install_steps_interactive.pm:1074
#, c-format
msgid "Proxies"
msgstr "প্রক্সিসমূহ"

#: help.pm:855 install_steps_interactive.pm:1085
#, c-format
msgid "Security Level"
msgstr "সিকউরিটি লেভেল"

#: help.pm:855 install_steps_interactive.pm:1099
#, c-format
msgid "Firewall"
msgstr "ফায়ারওয়াল"

#: help.pm:855 install_steps_interactive.pm:1115
#, c-format
msgid "Bootloader"
msgstr "বুটলোডার"

#: help.pm:855 install_steps_interactive.pm:1128 services.pm:193
#, c-format
msgid "Services"
msgstr "সার্ভিস সমূহ"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"হার্ড ড্রাইভ বেছে নিন যেটি আপনি আপনার নতুন ম্যান্ড্রিব লিনাক্স পার্টিশন ইনস্টল করার "
"জন্য\n"
"মুছে ফেলতে চান। সাবধান, এই ড্রাইভে থাকা সকল ডাটা হারিয়ে যাবে এবং আর কখনই\n"
"পাওয়া যাবে না!"

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"যদি এই হার্ড ড্রাইভে থাকা সব ডাটা এবং পার্টিশন মুছে ফেলতে চান তাহলে আপনি\n"
"\"%s\"তে ক্লিক করুন। সাবধান, \"%s\"তে ক্লিক করার পর, উইন্ডোজ ডাটাসহ,\n"
"আপনি এই হার্ড ড্রাইভে থাকা কোন ডাটা এবং পার্টিশন ফিরে\n"
"পাবেন না।\n"
"\n"
"এই অপারেশনের মাধ্যমে হার্ড ড্রাইভের উপস্থিত ডাটা এবং পার্টিশন হারাতে না চাইলে \"%s"
"\"তে ক্লিক করুন।"

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "পরবর্তী ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- পূর্ববর্তী"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"আপনার কার্ণেলের কার্ণেল মডিউলগুলোতে প্রবেশ করতে পারছে না (%s ফাইলটি হারিয়া "
"গেছে), এর স্বাভাবিক অর্থ হচ্ছে আপনার বুট ফ্লপি ইনস্টলেশন মিডিয়ামের সাথে sync এ নেই "
"(অনুগ্রহ করে একটি নতুন বুট ফ্লপি তৈরী করুন)"

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "আপনাকে অবশ্যই %s-ও ফরমেট করতে হবে"

#: install_any.pm:405
#, c-format
msgid "Do you have further supplementary media?"
msgstr "আপনার কি আরও একটি মাধ্যম আছে?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:408
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"নিম্নলিখিত মিডিয়া পাওয়া যাবে এবং ব্যবহৃত হবে : %s ইনস্টল করার সময়।\n"
"\n"
"\n"
"আপনার কি কন্‌ফিগার করার জন্য কোন সংযোজিত ইনস্টলেশন মিডিয়া আছে?"

#: install_any.pm:421 printer/printerdrake.pm:3022
#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "সিডি-রম"

#: install_any.pm:421
#, c-format
msgid "Network (HTTP)"
msgstr "নেটওয়ার্ক (HTTP)"

#: install_any.pm:421
#, c-format
msgid "Network (FTP)"
msgstr "নেটওয়ার্ক (FTP)"

#: install_any.pm:421
#, c-format
msgid "Network (NFS)"
msgstr ""

#: install_any.pm:451
#, c-format
msgid "Insert the CD 1 again"
msgstr "১ নং সিডিটি আবার প্রবেশ করান"

#: install_any.pm:476 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "কোন ডিভাইস পাওয়া যায় নি"

#: install_any.pm:481
#, c-format
msgid "Insert the CD"
msgstr "সিডিটি প্রবেশ করান"

# সাম
#: install_any.pm:486
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "CD-ROM মাউন্ট প্রক্রিয়া ব্যর্থ হয়েছে"

#: install_any.pm:518 install_any.pm:537
#, c-format
msgid "URL of the mirror?"
msgstr "mirror এর ইউ-আর-এল?"

#: install_any.pm:523
#, c-format
msgid "NFS setup"
msgstr ""

#: install_any.pm:523
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:524
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:524
#, c-format
msgid "Directory"
msgstr ""

#: install_any.pm:572
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "এই mirror এ কোন hdlist ফাইল পাওয়া যাচ্ছে না"

#: install_any.pm:735
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"আপনার সিডিরম পরিবর্তন করুন!\n"
"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
"ঠিক আছে চাপুন।"

#: install_any.pm:748
#, c-format
msgid "Copying in progress"
msgstr "কপি সম্পন্ন হচ্ছে"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:890
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"আপনি নিম্মলিখিত সার্ভার(গুলো) বেছে নিয়েছেন: %s\n"
"\n"
"\n"
"এই সার্ভারগুলো ডিফল্টভাবেই চালু করা থাকে। তাদের কোন নিরাপত্তা সমস্যা\n"
"নেই, কিন্তু নতুন কিছুর ক্ষেত্রে তার প্রয়োজন আছে। সেক্ষেত্রে আপনি অবশ্যই সেগুলোকে\n"
"যত তাড়াতাড়ি সম্ভব আপগ্রেড করার ক্ষেত্রে নিশ্চিত হোন।\n"
"\n"
"\n"
"আপনি কি আসলেই এই সার্ভারগুলো ইনস্টল করতে চান?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:913
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"আপনার সিস্টেম আপগ্রেড করার ক্ষেত্রে নিম্নলিখিত প্যাকেজগুলো মুছে যাবে: %s\n"
"\n"
"\n"
"আপনি কি আসলেই এই প্যাকেজগুলো মুছে ফেলতে চান?\n"

#: install_any.pm:1349 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "%s ফাইল পড়াতে ত্রুটি"

# সাম
#: install_any.pm:1580
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "নিম্নলিখিত ডিস্কগুলো নামান্তর করা হয়েছে:"

# সাম
#: install_any.pm:1582
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (পূর্বের নাম %s)"

#: install_any.pm:1620
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"একটি ভুল হয়ে গেছে - কোন সঠিক যন্ত্র পাওয়া যায়নি যেখানে নতুন ফাইল সিস্টেম তৈরি করা "
"হবে। অনুগ্রহ করে এই সমস্যার কারণের জন্য আপনার হার্ডওয়্যার পরীক্ষা করুন"

#: install_any.pm:1664
#, c-format
msgid "HTTP"
msgstr "এইচ-টি-টি-পি"

#: install_any.pm:1664
#, c-format
msgid "FTP"
msgstr "এফ-টি-পি"

# সাম
#: install_any.pm:1664
#, c-format
msgid "NFS"
msgstr "NFS"

# সাম
#: install_any.pm:1687
#, c-format
msgid "Please choose a media"
msgstr "অনুগ্রহ করে একটি মিডিয়া নির্বাচন করুন"

#: install_any.pm:1703
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "এই ফাইলটি আগে থেকেই আছে। করব?"

#: install_any.pm:1707
#, c-format
msgid "Permission denied"
msgstr "অনুমতি প্রদান করা হয়নি"

#: install_any.pm:1756
#, c-format
msgid "Bad NFS name"
msgstr ""

# সাম
#: install_any.pm:1777
#, c-format
msgid "Bad media %s"
msgstr "অগ্রহণযোগ্য মিডিয়া %s"

#: install_any.pm:1824
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "পার্টিশন করার আগে স্ক্রিনশট তৈরী করা যায়নি"

#: install_any.pm:1831
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "%s -এ ইনস্টল করার পরে স্ক্রিনশট পাওয়া যাবে"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "সিস্টেম ইনস্টলেশন"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "সিস্টেম কনফিগারেশন"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"আপনার কম্পিউটারের কিছু হার্ডওয়্যার কাজ করার জন্য ``মালিকানার'' ড্রাইভার প্রয়োজন।\n"
"আপনি তাদের সম্পর্কে এখান থেকে তথ্য নিতে পারবেন: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"আপনার অবশ্যই একটি root পার্টিশন থাকতে হবে।\n"
"সেকারণে, একটি পার্টিশন তৈরি করুন (অথবা ইতিমধ্যেই তৈরি একটিতে ক্লিক করুন)।\n"
"তারপর ``Mount point'' বেছে নিন এবং সেটাকে `/' তে সেট করুন"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"আপনার কোন swap পার্টিশন নেই\n"
"\n"
"তবুও আগাবো?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "আপনার /boot/efi -এ অবশ্যই একটি FAT পার্টিশন থাকতে হবে"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "নতুন পার্টিশন তৈরী করার জন্য যথেষ্ট পরিমান খালি জায়গা নেই"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "আগের পার্টিশনগুলি ব্যবহার করো"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ব্যবহারের জন্য এখানে উপস্থিত কোন পার্টিশন নেই"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "লুপ ব্যাকের জন্য উইন্ডোজের পার্টিশন ব্যবহার করো"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Linux4Win-এর জন্য আপনি কোন পার্টিশন ব্যবহার করতে চান?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "সাইজ পছন্দ করো"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "মেগাবাইটে রুট পার্টিশনের সাইজ:"

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "মেগাবাইটে সোয়াপ পার্টিশনের সাইজ:"

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "লুপব্যাকে ব্যবহারের জন্য কেন FAT পার্টিশন নেই (অথবা পর্যাপ্ত জায়গা নেই)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "আপনি কোন পার্টিশন রি-সাইজ করতে চান?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT আকার পরিবর্তক আপনার পার্টিশন হস্তক্ষেপ করতে পারেনি, \n"
"নিম্নের এই সমস্যাগুলো হয়েছে: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "আপনার উইন্ডোজের পার্টিশনের সাইজ হিসেব করা হচ্ছে"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"আপনার উইন্ডোজের পার্টিশনটি প্রচন্ড অসম। অনুগ্রহ করে আপনার কম্পিউটারটি উইন্ডোজে রি-বুট "
"করে, ``defrag'' ইউটিলিটি চালান, পরে  রি-ষ্টার্ট করে আবার মেনড্রক ইনস্টলেশন চালান।"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"সতর্ক বানী!\n"
"\n"
"DrakX এখন আপনার উইন্ডোজের পার্টিশন আকার পরিবর্তন করবে। খুবই সাবধান: এই\n"
"কার্যক্রমটি বিপদজ্জনক। আপনি যদি এরকম আগে করে না থাকেন, তাহলে আপনাকে\n"
"ইনস্টলেশন থেকে বের হয়ে, উইন্ডোজের কমান্ডপ্রমপ্ট থেকে \"chkdsk c:\" চালাতে হবে\n"
"(লক্ষ্য রাখবেন, \"scandisk\"-এর মত গ্রাফিক্যাল প্রোগ্রামগুলি যথেষ্ট নয়, আপনাকে\n"
"অবশ্যই কমান্ডপ্রমপ্ট থেকে \"chkdsk\" চালাতে হবে), ঐচ্ছিকভাবে defrag চালাতে\n"
"পরেন, পরে ইনস্টলেশন পুনরায় শুরু করবেন। আপনকে আপনার ডাটা ব্যাকআপ করা\n"
"উচিত্‍‌। নিশ্চিত্‍‌ হলে ঠিক আছে চাপুন।"

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "আপনি কোথায় উইন্ডোজের জন্য কোন সাইজটি রাখতে চান"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "পার্টিশনসমূহ %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "উইন্ডোজ পার্টিশন আকার পরিবর্তন করা হচ্ছে"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT আকার পরিবর্তন ব্যর্থ হয়েছে: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"রি-সাইজ করার জন্য কোন FAT পার্টিশন নেই (অথবা যথেষ্ট পারিমান ফাঁকা জায়গা নেই)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "উইন্ডোজ(TM) মুছে ফেলো"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "আপনার একের অধিক হার্ড ড্রাইভ আছে, আপনি কোনটাতে লিনাক্স ইনস্টল করতে চান?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "%s ড্রাইভে উপস্থিত সমস্থ ডাটা এবং পার্টিশন নষ্ট হয়ে যাবে"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "fdisk ব্যবহার করো"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"এখন আপনি %s-কে পার্টিশন করতে পারেন।\n"
"যখন হয়ে যাবে, তখন `w' চেপে সেভ করতে ভূলবেননা"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "আমি ইনস্টল করার জন্য কোন জায়গা পাচ্ছিনা"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX পার্টিশন সহায়ক এই সমস্থ সমাধান পেয়েছে:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "পার্টিশনে ব্যার্থ: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "নেটওয়ার্ককে চালু করা হচ্ছে"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "নেটওয়ার্ককে বন্ধ করা হচ্ছে"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"সাবধান: বিনামূল্যের সফ্‌টওয়্যার পেটেন্‌ট মুক্ত হওয়ার প্রয়োজন নেই, এবং কিছু বিনামূল্যের\n"
"সফ্‌টওয়্যার আপনার দেশ কর্তৃক পেটেন্‌টকৃত হতে পারে। উদাহরণস্বরুপ, অতিরিক্ত ব্যবহারের\n"
"জন্য MP3 decoder একটি লাইসেন্স যুক্ত থাকে (বিস্তারিত জানার জন্য দেখুন\n"
"http://www.mp3licensing.com । আপনি যদি অনিশ্চিত হোন যদি এর যেকোন\n"
"একটি আপনার জন্যও প্রযোজ্য হতে পারে, আপনার স্থানীয় আইন পরীক্ষা করুন।"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"অভিনন্দন, ইনস্টলেশন পুরোপুরিভাবে হয়ে গেছে।\n"
"দ্নবুট মিডিয়া সরিয়ে ফেলুন, এবং পুনরায় চালু করার জন্য return চাপুন।\n"
"\n"
"\n"
"এই সংস্করণের ম্যান্ড্রিব লিনাক্সের তথ্য এখানে পাওয়া যাচ্ছে,\n"
"কোন প্রকার সমস্যার সমাধান এখানে পাওয়া যাচ্ছে:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"আপনার সিস্টেম কন্‌ফিগার করার তথ্য অফিসিয়াল ম্যান্ড্রিব লিনাক্স ব্যবহারকারীর গাইডের\n"
"ইনস্টল হবার পরের অধ্যায়ে পাওয়া যাবে।"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrivalinux.com/en/errata.php3"
msgstr "http://www.mandrivalinux.com/en/errata.php3"

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "%s নকল মাউন্ট পয়েন্ট"

#: install_steps.pm:469
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"কিছু গুরুত্বপূর্ণ প্যাকেজ সঠিকভাবে ইনস্টল হয়নি।\n"
"হয় আপনার সিডিরম ড্রাইভ অথবা আপনার সিডিরম ত্রুটিপূর্ণ।\n"
"কোন ইনস্টল কম্পিউটারে \"rpm -qpl media/main/*.rpm\" কমান্ডের মাধ্যমে সিডিরম "
"পরীক্ষাকরুন\n"

#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "`%s' স্টেপে প্রবেশ করছি\n"

#: install_steps_gtk.pm:177
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"আপনার সিস্টেমের রিসোর্স খুব কম। ম্যান্ড্রিব লিনাক্স ইনস্টল করার সময় আপনি সমস্যার "
"মুখোমুখি\n"
"হতে পারেন. যদি সেটা ঘটে, তাহলে আপনাকে এর পরিবর্তে টেক্স ইনস্টল করতে হবে। এর "
"জন্য,\n"
"যখন সিডিরম থেকে বুট হবে তখন `F1' চাপুন, তারপর `text' লিখুন।"

#: install_steps_gtk.pm:224 install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "প্যাকেজ গ্রুপ নির্বাচন"

#: install_steps_gtk.pm:250 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "মোট সাইজ: %d / %d এমবি"

#: install_steps_gtk.pm:295
#, c-format
msgid "Bad package"
msgstr "বাজে প্যাকেজ"

#: install_steps_gtk.pm:297
#, c-format
msgid "Version: "
msgstr "ভার্সন:"

#: install_steps_gtk.pm:298
#, c-format
msgid "Size: "
msgstr "সাইজ:"

#: install_steps_gtk.pm:298
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:299
#, c-format
msgid "Importance: "
msgstr "প্রাধান্য:"

#: install_steps_gtk.pm:332
#, c-format
msgid "You can not select/unselect this package"
msgstr "আপনি এই প্যাকেজটি নির্বাচন/অ-নির্বাচন করতে পারবেন না"

#: install_steps_gtk.pm:336
#, c-format
msgid "due to missing %s"
msgstr "%s না থাকার কারনে"

#: install_steps_gtk.pm:337
#, c-format
msgid "due to unsatisfied %s"
msgstr "%s যথেষ্ট না হবার কারনে"

#: install_steps_gtk.pm:338
#, c-format
msgid "trying to promote %s"
msgstr "%s প্রচারের চেষ্টা চলছে"

#: install_steps_gtk.pm:339
#, c-format
msgid "in order to keep %s"
msgstr "%s রাখার কারণে"

#: install_steps_gtk.pm:344
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"আপনি এই প্যাকেজটি নির্বাচন করতে পারবেননা যেহেতু এটা ইনস্টল করার জন্য যথেষ্ট জায়গা "
"ফাঁকা নেই"

#: install_steps_gtk.pm:347
#, c-format
msgid "The following packages are going to be installed"
msgstr "এই প্যাকেজগুলি ইনস্টল হতে যাচ্ছে"

#: install_steps_gtk.pm:348
#, c-format
msgid "The following packages are going to be removed"
msgstr "এই প্যাকেজগুলি অপসরিত হতে যাচ্ছে"

#: install_steps_gtk.pm:372
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "এটি একটি বাধ্যতামূলাক প্যাকেজ, এটি কোনভাবেই বাদ দেয়া যাবেনা"

#: install_steps_gtk.pm:374
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr ""
"আপনি এই প্যাকেজটির অ-নির্বাচন করতে পারবেন না, এটা আগে থেকেই ইনস্টল হয়ে আছে"

#: install_steps_gtk.pm:377
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"এই প্যাকেজটি অবশ্যই আপগ্রেড করতে হবে।\n"
"আপনি কি নিশ্চিত্‍‌ এটা অ-নির্বাচন করতে চান?"

#: install_steps_gtk.pm:380
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "আপনি এই প্যাকেজটি অ-নির্বাচন করতে পারবেন না। এটা অবশ্যই আপগ্রেড হতে হবে"

#: install_steps_gtk.pm:385
#, c-format
msgid "Show automatically selected packages"
msgstr "সংয়-নির্বাচিত প্যাকেজগুলি দেখাও"

# সাম
#: install_steps_gtk.pm:390
#, c-format
msgid "Load/Save selection"
msgstr "নির্বাচনসমূহ লোড/সংরক্ষণ করো"

#: install_steps_gtk.pm:391
#, c-format
msgid "Updating package selection"
msgstr "প্যাকেজের নির্বাচন আপগ্রেড করা হচ্ছে"

#: install_steps_gtk.pm:396
#, c-format
msgid "Minimal install"
msgstr "সর্বনিম্ন ইনস্টল"

#: install_steps_gtk.pm:410 install_steps_interactive.pm:483
#, c-format
msgid "Choose the packages you want to install"
msgstr "আপনি যেই প্যাকেজগুলি ইনস্টল করতে চান তা পছন্দ করুন"

#: install_steps_gtk.pm:426 install_steps_interactive.pm:710
#, c-format
msgid "Installing"
msgstr "ইনস্টলেশন"

#: install_steps_gtk.pm:433
#, c-format
msgid "Estimating"
msgstr "নির্ধারণ চলছে"

#: install_steps_gtk.pm:482
#, c-format
msgid "No details"
msgstr "কোন বিস্তারিত ছাড়া"

#: install_steps_gtk.pm:490
#, c-format
msgid "Time remaining "
msgstr "সময় বাকী আছে"

#: install_steps_gtk.pm:497
#, c-format
msgid "Please wait, preparing installation..."
msgstr "ইনস্টলেশনের প্রস্তুতি চলছে, অনুগ্রহ করে অপেক্ষা করুন..."

#: install_steps_gtk.pm:512
#, c-format
msgid "%d packages"
msgstr "%d প্যাকেজ সমূহ"

#: install_steps_gtk.pm:517
#, c-format
msgid "Installing package %s"
msgstr "%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে"

#: install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735
#, c-format
msgid "Refuse"
msgstr "অস্বীকার"

#: install_steps_gtk.pm:556 install_steps_interactive.pm:739
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"আপনার সিডিরম পরিবর্তন করুন!\n"
"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
"ঠিক আছে চাপুন।\n"
"যদি সেটা আপনার না থাকে, এই সিডিরম থেকে ইনস্টলেশন এড়িয়ে যেতে বাতিল চাপুন।"

#: install_steps_gtk.pm:571 install_steps_interactive.pm:750
#, c-format
msgid "There was an error ordering packages:"
msgstr "প্যাকেজগুলো বিন্যস্ত করতে গিয়ে একটি ভুল ছিল:"

#: install_steps_gtk.pm:571 install_steps_gtk.pm:575
#: install_steps_interactive.pm:750 install_steps_interactive.pm:754
#, c-format
msgid "Go on anyway?"
msgstr "তবুও যাব?"

#: install_steps_gtk.pm:575 install_steps_interactive.pm:754
#, c-format
msgid "There was an error installing packages:"
msgstr "এই প্যাকেজগুলি ইনস্টল করতে সমস্যা হয়েছে:"

#: install_steps_gtk.pm:617 install_steps_interactive.pm:926
#: install_steps_interactive.pm:1075
#, c-format
msgid "not configured"
msgstr "কনফিগার করা হয়নি"

#: install_steps_gtk.pm:680
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"নিম্নলিখিত ইনস্টলেশন মিডিয়া পাওয়া গেছে।\n"
"যদি আপনি এগুলোর মধ্যকার কিছু এড়িয়ে যেতে চান, তাহলে এখন সেগুলোকে অনির্বাচিত করুন।"

# সাম
#: install_steps_gtk.pm:689
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""
"ইনস্টলেশনের আগে আপ‌নি সিডির তথ্যসমূহ হার্ডডিস্কে কপি করতে পারেন।\n"
" এরপর হার্ডডিস্ক থেকে ইনস্টলেশন চলতে থাকবে এবং সিস্টেম সম্পূর্ন ইনস্টলেশনের পরও "
"প্যাকেজগুলো রয়ে যাবে।"

# সাম
#: install_steps_gtk.pm:691
#, c-format
msgid "Copy whole CDs"
msgstr "CD গুলো সম্পুর্ন কপি করো "

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "লাইসেন্স এগ্রিমেন্ট"

#: install_steps_interactive.pm:88
#, c-format
msgid "Release Notes"
msgstr "সংস্করণ মন্তব্য"

#: install_steps_interactive.pm:118
#, c-format
msgid "Please choose your keyboard layout."
msgstr "অনুগ্রহ করে আপনার কীবোর্ড বিন্যাস পছন্দ করুন।"

#: install_steps_interactive.pm:120
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "এখানে উপস্থিত সমস্ত কীবোর্ডের তালিকা রয়োছে"

#: install_steps_interactive.pm:150
#, c-format
msgid "Install/Upgrade"
msgstr "ইনস্টল/আপগ্রড"

#: install_steps_interactive.pm:151
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "এটা কি একটি ইনস্টলেশন না আপগ্রেড?"

#: install_steps_interactive.pm:157
#, c-format
msgid "Upgrade %s"
msgstr "%s আপগ্রড করো"

#: install_steps_interactive.pm:168
#, c-format
msgid "Encryption key for %s"
msgstr "%s -এর জন্য এনক্রিপশন কী"

#: install_steps_interactive.pm:185
#, c-format
msgid "Please choose your type of mouse."
msgstr "আপনার মাউসের ধরণ পছন্দ করুন"

#: install_steps_interactive.pm:194 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "মাউস পোর্ট"

#: install_steps_interactive.pm:195 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "অনুগ্রহ করে আপনার মাউসটি যে সিরিয়াল পোর্টের সাথে সংযুক্ত আছে তা পছন্দ করুন।"

#: install_steps_interactive.pm:205
#, c-format
msgid "Buttons emulation"
msgstr "মাউসের বাটনগুলোর অনুকরণ"

#: install_steps_interactive.pm:207
#, c-format
msgid "Button 2 Emulation"
msgstr "২ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"

#: install_steps_interactive.pm:208
#, c-format
msgid "Button 3 Emulation"
msgstr "৩ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"

#: install_steps_interactive.pm:229
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:229
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIA কার্ডগুলি কনফিগার করা হচ্ছে..."

#: install_steps_interactive.pm:236
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:236
#, c-format
msgid "Configuring IDE"
msgstr "IDE কনফিগারেশন চলছে"

#: install_steps_interactive.pm:256
#, c-format
msgid "No partition available"
msgstr "কোন পার্টিশন বরাদ্দ নেই"

#: install_steps_interactive.pm:259
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "মাউন্ট পয়েন্ট খোঁজার জন্য পার্টিশনগুলি স্কেন করা হচ্ছে"

#: install_steps_interactive.pm:266
#, c-format
msgid "Choose the mount points"
msgstr "মাউন্ট পয়েন্টগুলি পছন্দ করুন"

#: install_steps_interactive.pm:312
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"১ মেগাবাইটের bootstrap এর জন্য খালি জায়গা নেই! ইনস্টল অগ্রসর হবে, কিন্তু আপনার "
"সিস্টেম বুট করার জন্য, আপনাকে DiskDrake থেকে bootstrap পার্টিশন তৈরী করতে হবে"

# সাম: bootstrap = বুটস্ট্র্যাপ? 
#: install_steps_interactive.pm:317
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""
"আপনাকে একটি PPC PReP Boot বুটস্ট্র্যাপ তৈরী করতে হবে! ইনস্টলেশন অগ্রসর হবে, তবে "
"আপনার সিস্টেম বুট করার জন্য, DiskDrake এর বুটস্ট্র্যাপ পার্টিশনটি প্রয়োজন"

#: install_steps_interactive.pm:353
#, c-format
msgid "Choose the partitions you want to format"
msgstr "ফরমেট করার জন্য পার্টিশনটি পছন্দ করুন"

#: install_steps_interactive.pm:355
#, c-format
msgid "Check bad blocks?"
msgstr "খারাপ ব্লক চেক করব?"

#: install_steps_interactive.pm:383
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"%s ফাইল সিস্টেম পরীক্ষা করতে ব্যার্থ হয়েছে। আপনি কি এই ত্রুটিগুলি সারাতে চান? (মনে "
"রাখবেন যে আপনি ডাটা হারাতে পারেন)"

#: install_steps_interactive.pm:386
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "ইনস্টলেশন সম্পূর্ন হবার জন্য যথেষ্ট swap জায়গা নেই, অনুগ্রহ করে কিছু যোগ করুন"

#: install_steps_interactive.pm:393
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "উপস্থিত প্যাকেজসমুহ পর্যবেক্ষন করে আবার RMP ডাটাবেইজ তৈরী করা হচ্ছে..."

#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
#, c-format
msgid "Looking for available packages..."
msgstr "বরাদ্দকৃত প্যাকেজসমূহ খোঁজা হচ্ছে..."

#: install_steps_interactive.pm:397
#, c-format
msgid "Looking at packages already installed..."
msgstr "যে সমস্থ প্যাকেজ ইনস্টল হয়ে আছে সেগুলি পর্যবেক্ষন করা হচ্ছে..."

#: install_steps_interactive.pm:401
#, c-format
msgid "Finding packages to upgrade..."
msgstr "আপগ্রেড করার জন্য প্যাকেজ খোঁজা হচ্ছে..."

#: install_steps_interactive.pm:421 install_steps_interactive.pm:830
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "আপনি একটি মিরর পছন্দ করুন যেখান থেকে প্যাকেজগুলি নেবেন"

#: install_steps_interactive.pm:461
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"আপনার সিস্টেমর (%d > %d) ইনস্টল বা আপগ্রেড করার জন্য যথেষ্ট পরিমান জায়গা নেই"

# সাম
#: install_steps_interactive.pm:495
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"অনুগ্রহ করে প্যাকেজ নির্বাচন লোড বা সংরক্ষণ বাছাই করুন।\n"
"এই ফরম্যাটটি auto_install দ্বারা তৈরী ফাইলসমূহের মত।"

#: install_steps_interactive.pm:497
#, c-format
msgid "Load"
msgstr "চাপ"

#: install_steps_interactive.pm:497 standalone/drakbackup:3918
#: standalone/drakbackup:3991 standalone/drakroam:210 standalone/logdrake:172
#, c-format
msgid "Save"
msgstr "সংরক্ষণ"

# সাম: 
# bad has been translated in many ways... নষ্ট, বাজে, খারাপ... please clarify
#: install_steps_interactive.pm:505
#, c-format
msgid "Bad file"
msgstr "অগ্রহণযোগ্য ফাইল"

#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr "উপস্থিত জায়গার চাইতে নির্বাচিত সাইজটি অনেক বড়"

#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr "ইনস্টলের ধরণ"

#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"আপনি প্যাকেজের কোন গ্রুপ নির্বাচন করেননি।\n"
"অনুগ্রহ করে আপনি যে ক্ষুদ্রাকৃতির ইনস্টলেশন চান তা পছন্দ করুন:"

#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "সাধারন নির্দেশিকার সাথে (পরামর্শ দেয়া হচ্ছে!)"

#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "এক্কেবারেই ক্ষুদ্র ইনস্টলেশন (বিশেষ করে কোন urpmi ছাড়া)"

#: install_steps_interactive.pm:641 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "সকল"

#: install_steps_interactive.pm:680
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"নিচের লিষ্টের সব সিডিগুলি আপনার থাকেল, ঠিক আছে ক্লিক্ করুন।\n"
"এগুলির কোনটিই যদি না থাকে তাহলে, বাতিল ক্লিক্ করুন।\n"
"যদি কিছু সিডি না থাকে, তাহলে সেগুলি অনির্বাচিত করে ঠিক আছে ক্লিক্ করুন।"

#: install_steps_interactive.pm:685
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "\"%s\" লেভেলের সিডি-রম"

#: install_steps_interactive.pm:710
#, c-format
msgid "Preparing installation"
msgstr "ইনস্টলেশনের প্রস্তুতি চলছে"

#: install_steps_interactive.pm:719
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে\n"
"%d%%"

#: install_steps_interactive.pm:768
#, c-format
msgid "Post-install configuration"
msgstr "ইনস্টলের পরের কনফিগারেশন"

#: install_steps_interactive.pm:775
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:804
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"আপনি এখন আপডেট প্যাকেজ ডাউনলোড করতে পারবেন। এই প্যাকেজগুলো\n"
"এই ডিস্ট্রিবিউশন রিলিজ হবার পর আপডেট করতে পারেন। তারা নিরাপত্তা\n"
"বা ত্রুটি নির্দিষ্ট ধারণ করতে পারে।\n"
"\n"
"এই প্যাকেজগুলো ডাউনলোড করতে, আপনার ইন্টারনেট সংযুক্তিতে কাজ করতে\n"
"হবে।\n"
"\n"
"আপনি কি ইনস্টল আপডেট করতে চান?"

#: install_steps_interactive.pm:825
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr "উপস্থিত মিররের তালিকার জন্য Mandriva Linux-এ সংযুক্ত করা হচ্ছে..."

#: install_steps_interactive.pm:844
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "প্যাকেজের তালিকার জন্য মিররের সাথে সংযুক্ত করা হচ্ছে..."

#: install_steps_interactive.pm:848
#, c-format
msgid "Unable to contact mirror %s"
msgstr "%s মিররের সাথে সংযুক্ত হওয়া গেলনা"

#: install_steps_interactive.pm:848
#, c-format
msgid "Would you like to try again?"
msgstr "আপনি কি আবার চেষ্টা করতে চান?"

#: install_steps_interactive.pm:875 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "আপনার টাইমজোন কি?"

#: install_steps_interactive.pm:880
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "সয়ংক্রিয়ভাবে সময় মেলাও (NTP ব্যবহার করে)"

#: install_steps_interactive.pm:888
#, c-format
msgid "NTP Server"
msgstr "NTP সার্ভার"

#: install_steps_interactive.pm:930 steps.pm:30
#, c-format
msgid "Summary"
msgstr "সারাংশ"

#: install_steps_interactive.pm:943 install_steps_interactive.pm:951
#: install_steps_interactive.pm:969 install_steps_interactive.pm:976
#: install_steps_interactive.pm:1127 services.pm:133
#: standalone/drakbackup:1573
#, c-format
msgid "System"
msgstr "সি"

#: install_steps_interactive.pm:983 install_steps_interactive.pm:1010
#: install_steps_interactive.pm:1027 install_steps_interactive.pm:1043
#: install_steps_interactive.pm:1054
#, c-format
msgid "Hardware"
msgstr "হার্ডওয়্যার"

#: install_steps_interactive.pm:989 install_steps_interactive.pm:998
#, c-format
msgid "Remote CUPS server"
msgstr "দূরবর্তী CUPS সার্ভার"

#: install_steps_interactive.pm:989
#, c-format
msgid "No printer"
msgstr "কোন প্রিন্টার নেই"

#: install_steps_interactive.pm:1031
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "আপনার কি একটি ISA সাউন্ড কার্ড আছে?"

#: install_steps_interactive.pm:1033
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"ইনস্টল শেষ হবার পরে সাউন্ড কার্ড কনফিগার করার জন্য \"alsaconf\" অথবা \"sndconfig"
"\" চালাও"

#: install_steps_interactive.pm:1035
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "কোন সাউন্ডকার্ড সনাক্ত হয়নি, ইনস্টলের পরে \"harddrake\" দিয়ে চেষ্টা করুন"

#: install_steps_interactive.pm:1055
#, c-format
msgid "Graphical interface"
msgstr "গ্রাফিকাল ইন্টারফেস"

#: install_steps_interactive.pm:1061 install_steps_interactive.pm:1073
#, c-format
msgid "Network & Internet"
msgstr "নেটওয়ার্ট এবং ইন্টারনেট"

#: install_steps_interactive.pm:1075
#, c-format
msgid "configured"
msgstr "কনফিগার করা হয়েছে"

#: install_steps_interactive.pm:1084 install_steps_interactive.pm:1098
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "সিকিউরিটি"

#: install_steps_interactive.pm:1103
#, c-format
msgid "activated"
msgstr "সক্রিয় হয়েছে"

#: install_steps_interactive.pm:1103
#, c-format
msgid "disabled"
msgstr "অকার্যকর করা হয়েছে"

#: install_steps_interactive.pm:1114
#, c-format
msgid "Boot"
msgstr "বুট"

#  -PO: example: lilo-graphic on /dev/hda1
#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1118
#, c-format
msgid "%s on %s"
msgstr "%s -এ %s"

#: install_steps_interactive.pm:1132 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "সার্ভিস সমূহ: %d সক্রিয় হয়েছে %d রেজিষ্টারের জন্য"

#: install_steps_interactive.pm:1142
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "আপনি X কনফিগার করেননি। আপনি কি নিশ্চিত এরকমটি চান?"

#: install_steps_interactive.pm:1223
#, c-format
msgid "Preparing bootloader..."
msgstr "Bootloader প্রস্তুত করা হচ্ছে..."

#: install_steps_interactive.pm:1233
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""
"আপনার মেশিনটি মনে হচ্ছে একটি Oldworld বা অজানা মেশিন, yaboot বুটলোডারটি আপনার "
"জন্য কাজ করবে না। ইনস্টল এগিয়ে যাবে, কিন্তু আপনার মেশিনকে বুট করার জন্য আপনাকে "
"BootX বা অন্য কোন কিছু ব্যবহার করতে হবে। root fs এর জন্য কার্নেল প্রেরিত মান হবে: "
"root=%s"

#: install_steps_interactive.pm:1239
#, c-format
msgid "Do you want to use aboot?"
msgstr "আপনি কি aboot ব্যবহার করতে চান?"

#: install_steps_interactive.pm:1242
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Aboot ইনস্টলে ব্যর্থ হয়েছে,\n"
"জোর করে ইনস্টলের চেষ্টা করবো যদিও সেটা প্রথম পার্টিশনকে নষ্ট করতে পারে?"

#: install_steps_interactive.pm:1259
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"এই নিরাপত্তা লেভেলে, উইন্ডোজ পার্টিশনের ফাইলে প্রবেশ শুধুমাত্র অ্যাডমিনিস্ট্রেটরের আছে।"

#: install_steps_interactive.pm:1288 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "%s ড্রাইভে একটি ফাঁকা ফ্লপি ঢোকান"

#: install_steps_interactive.pm:1293
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "ড্রাইভারের ডিস্কের জন্য অন্য একটি ফ্লপি ঢোকান"

#: install_steps_interactive.pm:1295
#, c-format
msgid "Creating auto install floppy..."
msgstr "সয়ং ইনস্টল ফ্লপি তৈরী করা হচ্ছে..."

#: install_steps_interactive.pm:1307
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"কিছু ধাপ সম্পূর্ন করা যায়নি।\n"
"\n"
"আপনি কি এখন বের হতে চান?"

#: install_steps_interactive.pm:1323
#, c-format
msgid "Generate auto install floppy"
msgstr "সয়ংক্রিয় ইনস্টল ফ্লপি প্রস্তুত করো"

#: install_steps_interactive.pm:1325
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"যদি আপনি চান স্বয়ংক্রিয় ইনস্টল পুরোপুরি স্বয়ংক্রয়ভাবে হবে,\n"
"সেক্ষেত্রে সেটা হার্ড ড্রাইভের কর্তৃত্বে!!\n"
"(এর মানে হচ্ছে অন্য একটি বাক্সে ইনস্টল)।\n"
"\n"
"আপনি তার চেয়ে পুনরায় ইনস্টলেশন চালু করুন।\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Mandriva Linux ইনস্টলেশন %s"

#  -PO: This string must fit in a 80-char wide text screen
#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> উপাদানগুলোর মধ্যে  | <Space> বাছাই | <F12> পরবর্তী স্ক্রীণ "

#: interactive.pm:192
#, c-format
msgid "Choose a file"
msgstr "একটি ফাইল পছন্দ করুন"

#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakbackup:1514
#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "যোগ"

#: interactive.pm:317 interactive/gtk.pm:505
#, c-format
msgid "Modify"
msgstr "পরিবর্তন"

#: interactive.pm:317 interactive/gtk.pm:505 standalone/drakroam:202
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "মুছে ফেলো"

#: interactive.pm:394
#, c-format
msgid "Basic"
msgstr "সাধারণ"

#: interactive.pm:432 interactive/newt.pm:321 ugtk2.pm:506
#, c-format
msgid "Finish"
msgstr "সমাপ্ত"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "করো"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "বাজে পছন্দ, আবার চেষ্টা করুন\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "আপনার পছন্দ? (সাধারনত %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"এই এন্ট্রিগুলি আপনাকে পূরণ করতে হবে:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Your choice? (0/1, সাধারনত `%s')"

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "বাটন `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "আপনি কি এই বাটনে ক্লিক করতে চান?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "আপনার পছন্দ? (সাধারনত `%s'%s)"

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " সঠিক এন্ট্রর জন্য `void' প্রবেশ করুন"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> (%s)-থেকে পছন্দ করার অনেক কিছু আছে।\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"সম্পাদিত করতে চান আপনার পছন্দের এমন ১০-রেজ্ঞের প্রথম সংখ্যাটিকে অনুগ্রহ করে আপনি "
"বেছে নিন,\n"
"অথবা শুধুমাত্র চালিয়ে যাও'তে হিট করুন।\n"
"আপনার পছন্দ? "

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> নোটিশ, একটি নাম পরিবর্তিত হয়েছে:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "পুনরায়-পেশ"

#: keyboard.pm:171 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "চেজ (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "জার্মান"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "ডিভোর্ক"

#: keyboard.pm:174 keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "স্পেনিশ"

#: keyboard.pm:175 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "ফিনিস"

#: keyboard.pm:176 keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "ফ্রান্স"

#: keyboard.pm:177 keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "নরিয়"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "পোলিশ"

#: keyboard.pm:179 keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "রাশিয়ান"

#: keyboard.pm:181 keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "সুইডিশ"

#: keyboard.pm:182 keyboard.pm:320
#, c-format
msgid "UK keyboard"
msgstr "UK কি-বোর্ড"

#: keyboard.pm:183 keyboard.pm:323
#, c-format
msgid "US keyboard"
msgstr "US কি-বোর্ড"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "আরবীয়"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "আরমেনীয় (পুরনো)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "আরমেনীয় (টাইপরাইটার)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "আরমেনীয় (উচ্চারণভিত্তিক)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "আরবীয়"

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "আজেরবাঈদজানি (ল্যাটিন)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "বেলজিয়ান"

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "বাংলা (ইনস্ক্রিপ্ট লে-আউট)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "বাংলা (প্রভাত লে-আউট)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "বুলগেরিয়ান (উচ্চারণভিত্তিক)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "বুলগেরিয়ান (BDS)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "ব্রাজিলিয়ান (ABNT-2)"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "বসনিয়ান"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "বেলুরাশিয়ান"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "সুইশ (জার্মান লে-আউট)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "সুইশ (ফ্রেঞ্জ লে-আউট)"

# sam: what about the leading '_: keyboard\n
# banglish?
#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "চেরোকী সিলাবিক্স"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "চেজ (QWERTY)"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "German (কোন dead key ছাড়া)"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "দৈবনগরী"

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "ডেনিশ"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "ডেভোর্ক (US)"

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "ডেভোর্ক (Esperanto)"

# sam
#: keyboard.pm:215
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "ডেভোরাক (ফ্রেঞ্চ‌)"

# sam
#: keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "ডেভোরাক (ইউকে)"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "ডেভোর্ক (Norwegian)"

# sam
#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "ডেভোরাক (পোলিশ)"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "ডেভোর্ক (Swedish)"

# sam
#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "যংকা/তিব্বতীয়"

#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "ইষ্টোনিয়ান"

# sam
#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "ফারোইয"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "জর্জিয়ান (\"রাশিয়ান\" লে-আউট)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "জর্জিয়ান (\"ল্যাটিন\" লে-আউট)"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "গ্রীক"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "গ্রীক (পলিটোনিক)"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "গুজরাটি"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "গুর্মুখী"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "ক্রোয়েশিয়ান"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "হাঙ্গেরিয়ান"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "আইরিশ"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "ইসরাঈল"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "ইসরাঈল (উচ্চারণভিত্তিক)"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "ইরানি"

#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "আইসল্যান্ডের"

#: keyboard.pm:242
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "ইটালীয়ান"

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "ইনাকটিটুট"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "জাপানীজ ১০৬ কী"

#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "কান্নাডা"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "কোরিয়ান কীবোর্ড"

# sam
#: keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "কুর্দিশ (আরবী লিপি)"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Kyrgyz কি-বোর্ড"

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "ল্যাটিন আমেরিকান"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "ল্যাওটিআন"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "লিথ্যুনিয়ান AZERTY (আগের)"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "লিথ্যুনিয়ান AZERTY (নতুন)"

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "লিথ্যুনিয়ান \"number row\" QWERTY"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "লিথ্যুনিয়ান \"phonetic\" QWERTY"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "লাটভিয়ান"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "মালায়লাম"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "ম্যাসিডোনিয়ান"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "মিয়ানমার (বার্মিজ)"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "মঙ্গলীয়ান (কীরিল্লিক)"

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "মালটেসে (ইউকে)"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "মালটেসে (ইউএস)"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "ডাচ্‌"

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "ওরিয়া"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "পোলিশ (qwerty লে-আউট)"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "পোলিশ (qwertz  লে-আউট)"

# sam
#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "পাশতু"

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "পর্তুগীজ"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "কানাডিয়ান (Quebec)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "রোমানিয়ান (qwertz)"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "রোমানিয়ান (qwerty)"

#: keyboard.pm:285
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "রাশিয়ান (উচ্চারণভিত্তিক)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "ছ্যামী (norwegian)"

# আচ্ছা ফিনিস বানানটা অন্য কিছু লেখা উচিত্‍‌ না? কারন আমাদের দেশে ফিনিস বলতে একটা মশা মারার ঔষধের নাম বোঝায়। আর এখন যে ডেঙ্গু চারিদিকে!!!
#: keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr "ছ্যামী (সুইডিশ/ফিনিস)"

# sam
#: keyboard.pm:289
#, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "সিন্ধি"

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "স্লোভেনিয়ান"

#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "স্লোভেকিয়ান (QWERTZ)"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "স্লোভেকিয়ান (QWERTY)"

#: keyboard.pm:297
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "সার্বিয়ান (কিরিল্লিক)"

#: keyboard.pm:298
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "স্যাইরিক"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "স্যাইরিক (উচ্চারণভিত্তিক)"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "তেলেগু"

#: keyboard.pm:302
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "তামিল (ISCII-লে-আউট)"

#: keyboard.pm:303
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "তামিল (টাইপরাইটার-লে-আউট)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "থাই কী-বোর্ড (Kedmanee-লে-আউট)"

#: keyboard.pm:305
#, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "থাই কী-বোর্ড (TIS-820-লে-আউট)"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "থাই কী-বোর্ড (Pattachote-লে-আউট)"

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:311
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "তাজিক কী-বোর্ড"

# sam
#: keyboard.pm:315
#, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "তুর্কমেনীয়"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "টার্কিস (ঐতিহ্যবাহী \"F\" মডেল)"

#: keyboard.pm:317
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "টার্কিস (ঐতিহ্যবাহী \"Q\" মডেল)"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "উকরানিয়ান"

# sam
#: keyboard.pm:322
#, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "উর্দূ কিবোর্ড"

#: keyboard.pm:324
#, c-format
msgid "US keyboard (international)"
msgstr "US কী-বোর্ড (আন্তর্জাতিক)"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "উজবেক (কীরিল্লিক)"

#: keyboard.pm:327
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "ভিয়েতনামিজ \"numeric row\" QWERTY"

#: keyboard.pm:328
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "ইয়ুগস্লোভিয়ান (ল্যাটিন)"

#: keyboard.pm:335
#, c-format
msgid "Right Alt key"
msgstr "ডান Alt কী"

#: keyboard.pm:336
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "পরপর দু'টি Shift কী"

#: keyboard.pm:337
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "পরপর Control এবং Shift কী"

#: keyboard.pm:338
#, c-format
msgid "CapsLock key"
msgstr "CapsLock কী"

#: keyboard.pm:339
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Shift এবং CapsLock কী একই সাথে"

#: keyboard.pm:340
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "পরপর Control এবং Alt কী"

#: keyboard.pm:341
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "পরপর Alt এবং Shift কী"

#: keyboard.pm:342
#, c-format
msgid "\"Menu\" key"
msgstr "\"Menu\" কী"

#: keyboard.pm:343
#, c-format
msgid "Left \"Windows\" key"
msgstr "বাম \"Windows\" কী"

#: keyboard.pm:344
#, c-format
msgid "Right \"Windows\" key"
msgstr "ডান \"Windows\" কী"

#: keyboard.pm:345
#, c-format
msgid "Both Control keys simultaneously"
msgstr "পরপর দু'টি Control কী"

#: keyboard.pm:346
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "পরপর দু'টি Alt কী"

#: keyboard.pm:347
#, c-format
msgid "Left Shift key"
msgstr "বাম Shift কী"

#: keyboard.pm:348
#, c-format
msgid "Right Shift key"
msgstr "ডান Shift কী"

#: keyboard.pm:349
#, c-format
msgid "Left Alt key"
msgstr "বাম Alt কী"

#: keyboard.pm:350
#, c-format
msgid "Left Control key"
msgstr "ডান Alt কী"

#: keyboard.pm:351
#, c-format
msgid "Right Control key"
msgstr "ডান Control কী"

#: keyboard.pm:387
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করার জন্য এখানে\n"
"আপনি কী বা কী এর কম্বিনেশন পছন্দ করতে পারেন\n"
"(যেমন: ল্যাটিন এবং বাংলা)"

#: keyboard.pm:392
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"ইনস্টলেশন শেষ হবার পরে এটা সক্রিয় হবে।\n"
"ইনস্টল চলাকালীন, আপনাকে ডান Control কী ব্যবহার\n"
"করে বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করতে হবে।"

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "এনডোররা"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "সংযুক্ত আরব আমিরাত"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "আফগানিস্তান"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "আংটিগুয়া এবং বারবুদা"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "অ্যাংগুইল্লিয়া"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "আলবেনিয়া"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "আরমেনিয়া"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "নেদারল্যান্ড এ্যন্টিল্লিস"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "অ্যাংগোলা"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "এন্টার্কটিকা"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "আর্জেন্টিনা"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "আমেরিকান সামোয়া"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "অরুবা"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "আজেরবাঈজান"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "বসনিয়া এবং হার্জোগোভিনা"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "বার্বাডোস"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "বাংলাদেশ"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "বুর্কিনা ফাসো"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "বুলগেরিয়া"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "বাহরাইন"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "বুরুন্ডি"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "বেনিন"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "বার্মুডা"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "ব্রুনেই দারুসসালাম"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "বলিভিয়া"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "বাহামা"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "ভূটান"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "বৌভেট দীপসমূহ"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "বত্‌সওয়ানা"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "বেলারুস"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "বেলিজে"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "কোকোস (কেলিং) দীপসমূহ"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr "কঙ্গো (কিংশাসা)"

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "মধ্য আফ্রিকান গণপ্রজাতন্ত্র"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr "কঙ্গো (ব্রাজ্জাভিল্লে)"

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "কোট ডি'লভোরে"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "কুক দীপপুঞ্জ"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "চিলি"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "ক্যামেরুন"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "চীন"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "কলম্বিয়া"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "সারবিয়া এবং মোনটেংগ্র"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "কিউবা"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "কেপ ভার্দে"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "ক্রিসমাস দীপপুঞ্জ"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "সাইপ্রাস"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "ডজিবুতি"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "ডোমিনিকা"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "গণপ্রজাতন্ত্রী ডোমিনিকা"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "আলজেরিয়া"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "ইকুয়েডর"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "মিশর"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "পশ্চিম সাহারা"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "এরিট্রিয়া"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "ইথিওপিয়া"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "ফুজি"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "ফোকল্যান্ড দীপপুঞ্জ (মালভিনাস)"

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "মাক্রোনেশিয়া"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "ফারোয় দীপপুঞ্জ"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "গ্যাবোন"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "যুক্তরাজ্য"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "গ্রেনেডা"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "জর্জিয়া"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "ফ্রেঞ্জ গায়ানা"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "ঘানা"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "জিব্রাল্টার"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "গ্রীণল্যান্ড"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "জাম্বিয়া"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "গিনি"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "গুয়াদেলুপে"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "ইকুয়েটরিয়াল গিনি"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "দক্ষিন জর্জিয়া এবং দক্ষিন স্যান্ডউইচ্‌ দীপপুঞ্জ"

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "গুয়াতেমালা"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "গুয়াম"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "গিনি-বিসাউ"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "গায়ানা"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "হংকং (চীন)"

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr "হার্ড এবং ম্যাকডোনাল্ড দীপপুঞ্জ"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "হন্ডুরাস"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "ক্রোয়েশিয়া"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "হাইতি"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "ইন্দোনেশিয়া"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "ভারত"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "ব্রিটিশ ভারতীয় মহাসাগর সমরাজ্য"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "ইরাক"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "ইরান"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "আইসল্যান্ড"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "জামাইকা"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "জর্ডান"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "কেনিয়া"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "কিরগিজস্তান"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "কম্বোডিয়া"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "কিরিবাতি"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "কমোরোস"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "সেন্ট কিট্টস্‌ এবং নেভিস্‌"

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "কোরিয়া (উত্তর)"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "কোরিয়া"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "কুয়েত"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "কেম্যান দীপপুঞ্জ"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "কাজাকিস্তান"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "লাওস্‌"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "লেবানন"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "সেইন্ট লুইস"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "লিয়েচ্‌টেনস্তেইন"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "শ্রীলঙ্কা"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "লাইবেরিয়া"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "লেসথো"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "লিথুয়েনিয়া"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "লুক্সেমবার্গ"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "লাটভিয়া"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "লিবিয়া"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "মরক্কো"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "মোনাকো"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "মলডোভা"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "মাদাগাস্‌কার"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "মার্শাল দীপপুঞ্জ"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "ম্যাসিডোনিয়া"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "মালি"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "মিয়ানমার"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "মঙ্গোলীয়া"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "উত্তর মারিয়ানা দীপপুঞ্জ"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "মির্টিনিক্‌"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "মৌরিতানিয়া"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "মন্টসেরাত"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "মাল্টা"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "মরিসাস"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "মালদ্বীপ"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "মালাউ"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "মেক্সিকো"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "মালয়েশিয়া"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "মোজাম্বিক"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "নামিবিয়া"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "নিউ ক্যালেডোনিয়া"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "নাইজার"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "নরফোক দীপপুঞ্জ"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "নাইজেরিয়া"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "নাইসারাগুয়া"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "নেপাল"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "নাউরু"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "নিউও"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "ওমান"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "পানামা"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "পেরু"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "ফ্রেঞ্জ পলিনেশিয়া"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "পাপুয়া নিউগিনি"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "ফিলিপাইন"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "পাকিস্তান"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "সেন্ট পিয়েরে এবং মুকুলন"

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "পিটকাইরন"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "পুয়ের্তোরিকো"

#: lang.pm:369
#, c-format
msgid "Palestine"
msgstr "প্যালেস্টাইন"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "পারাগুয়ে"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "পালাউ"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "কাতার"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "রিইউনিয়ন"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "রোমানিয়া"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "রুয়ান্ডা"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "সৌদী আরব"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "সলোমন দীপপুঞ্জ"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "সেইছিল্লেস"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "সুদান"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "সিঙ্গাপুর"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr "সেন্ট হেলেনা"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "স্লোভেনিয়া"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "স্ভালবার্দ এবং জান মায়ান দীপপুঞ্জ"

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "সিয়েররা লেওয়ান"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "সান মেরিনো"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "সেনেগাল"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "সোমালিয়া"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "সুরিনাম"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "সাও টোমি এবং প্রিন্সিপে"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "এই সাল্ভাদোর"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "সিরিয়া"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "সুইজারল্যান্ড"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "টার্ক এবং কাইকোস দীপপুঞ্জ"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "চাদ"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "দক্ষিন ফ্রান্স সাম্রাজ্য"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "টোগো"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "তাজিকিস্তান"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "তোকেলাউ"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "পূর্ব তিমুর"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "তুর্কমেনিস্তান"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "তানিসিয়া"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "টঙ্গো"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "তুর্কি"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "ট্রিনিদাদ এবং টোবাগো"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "টুভালু"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "তানজানিয়া"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "আকরাইসন"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "উগান্ডা"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "যুক্ত রাষ্ট্রের বাহিরের দীপপুঞ্জ"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "উরুগুয়ে"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "উজবেকিস্তান"

#: lang.pm:419
#, c-format
msgid "Vatican"
msgstr "ভ্যাটিক্যান"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "সেন্ট ভিনসেন্ট এবং গ্রানাডা"

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "ভেনিজুয়েলা"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr "ভার্জিন দীপপুঞ্জ (ব্রিটিশ)"

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "ভার্জিন দীপপুঞ্জ (ইউ.এস)"

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "ভিয়েতনাম"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "ভানাতু"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr "ওয়েলস্ এবং ফুটুনা"

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "সামোয়া"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "ইয়েমান"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "মায়োত্তে"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "জাম্বিয়া"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "জিম্বাবুয়ে"

#: lang.pm:1079
#, c-format
msgid "You should install the following packages: %s"
msgstr "নিম্নের প্যাকেজসমুহ আপনার ইনস্টল করা উচিত: %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: lang.pm:1082 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: lang.pm:1135
#, c-format
msgid "Welcome to %s"
msgstr "%s -এ আপনাকে স্বাগতম"

#: lvm.pm:130
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:139
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "প্রথমে লজিকাল ভলিউম সরিয়ে ফেলুন\n"

#: lvm.pm:172
#, c-format
msgid "The bootloader can't handle /boot on multiple physicals volumes"
msgstr ""

#: modules/interactive.pm:21 standalone/drakconnect:1028
#, c-format
msgid "Parameters"
msgstr "প্যারামিটার"

#: modules/interactive.pm:21 standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "নেই"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "মডিউল কনফিগারেশন"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "আপনি এখানে প্রত্যেক মডিউলের প্যারামিটার কন্‌ফিগার করতে পারেন।"

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "%s ইন্টারফেসসমূহ পাওয়া গিয়েছে"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "আপনার কি আরও একটি আছে?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "আপনার কি কোন %s ইন্টারফেস আছে?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "হার্ডওয়্যারের তথ্য দেখুন"

#  -PO: the first %s is the card type (scsi, network, sound,...)
#  -PO: the second is the vendor+model name
#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "ইউএসবি কন্ট্রোলারের জন্য ড্রাইভার ইনস্টল করা হচ্ছে"

#  -PO: the first %s is the card type (scsi, network, sound,...)
#  -PO: the second is the vendor+model name
#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "ফায়ারওয়ার কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"

#  -PO: the first %s is the card type (scsi, network, sound,...)
#  -PO: the second is the vendor+model name
#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "হার্ড ড্রাইভ কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"

#  -PO: the first %s is the card type (scsi, network, sound,...)
#  -PO: the second is the vendor+model name
#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "ইথার্নেট কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"

#  -PO: the first %s is the card type (scsi, network, sound,...)
#  -PO: the second is the vendor+model name
#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "%s, %s কার্ডের জন্য ড্রাইভার ইনস্টল করা হচ্ছে"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(মডিউল %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"আপনি এখন হয়তো %s মডিউলের জন্য অপশন প্রদান করবেন\n"
"লক্ষ্য রাখবেন যাতেকরে প্রবেশ করানো ঠিকানাগুলি 0x প্রিফিক্স দিয়ে হয়, যেমন '0x123'"

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"আপনি এখন %s মডিউলের অপশন পেতে পারেন।\n"
"অপশনের ফরম্যাট হচ্ছে ``name=value name2=value2 ...''।\n"
"এই মুহূর্তে, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "মডিউলের অপশন সমূহ:"

#  -PO: the %s is the driver type (scsi, network, sound,...)
#  -PO: the %s is the driver type (scsi, network, sound,...)
#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "আমি কোন %s ড্রাইভার চেষ্টা করব?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"কোন কোন ক্ষেত্রে, ঠিকমত কাজ করার %s ড্রাইভারের কিছু অতিরিক্ত তথ্য প্রয়োজন, যদিও "
"এটা \n"
"স্বাভাবিকভাবে ওগুলো ছাড়াই ভাল কাজ করে। আপনি কি এর জন্য অতিরিক্ত অপশন বেছে "
"নিতেচান অথবা আপনার\n"
"মেশিনের প্রয়োজনীয় তথ্য আপনার ড্রাইভার দিয়ে ঠিক করে নিতে চান?\n"
"সাময়িকভাবে, এটি আপনার কম্পিউটারকে হ্যাং করবে, কিন্তু এটা কোন কিছু নষ্ট করবে না।"

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "স্বয়ংক্রিয় পরীক্ষা"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "অপশনসমূহ বর্ননা করুন"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"%s মডিউল লোড করতে ব্যর্থ।\n"
"আপনি কি অন্য প্যারামিটার দিয়ে আবার চেষ্টা করতে চান?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "একটি নম্বর"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d কমা দিয়ে আলাদা করা নম্বর সমূহ"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d কমা দিয়ে আলাদা করা বাক্য সমূহ"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "কমা দিয়ে আলাদা করা নম্বর সমূহ"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "কমা দিয়ে আলাদা করা বাক্য সমূহ"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "সান - মাউস"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "সাধারণ"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "সাধারণ PS2 চাকা মাউস"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:73 network/modem.pm:87 network/modem.pm:92
#: network/modem.pm:125 network/netconnect.pm:576 network/netconnect.pm:581
#: network/netconnect.pm:593 network/netconnect.pm:598
#: network/netconnect.pm:614 network/netconnect.pm:616
#, c-format
msgid "Automatic"
msgstr "সয়ংক্রিয়"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking মাউস"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "জিনিয়াস NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "জিনিয়াস NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "মাইক্রসফ্ট এক্সপ্লোরার"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "১ বাটন"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "সাধারণ ২ বাটন মাউসের অনুকরণ করো"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "চাকার সাথে ৩ বাটন মাউসের অনুকরণ করো"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "চাকা"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "সিরিয়াল"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "সাধারণ ২৩ বাটন মাউস"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "মাইক্রসফ্ট IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "লজিটেক্ MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "চাকার অনুকরণে লজিটেক্ MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "মাউস সিস্টেম"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "লজিটেক্ CC সিরিজ"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "চাকার অনুকরণে লজিটেক্ CC সিরিজ"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "লজিটেক্ MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM সিরিজের"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM হিটট্যাবলেট"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "চাকার অনুকরণে Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "চাকা অনুকরণে Kensington Thinking Mouse"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "২ বাটন"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "৩ বাটন"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "চাকা অনুকরণে ৩ বাটন"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "সর্বজনীন"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "যে কোন PS/2 এবং ইউএসবি মাউস"

# sam
#: mouse.pm:89
#, c-format
msgid "Microsoft Xbox Controller S"
msgstr "মাইক্রোসফ্ট Xbox Controller S"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "না"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "কোন মাউস নেই"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr "Synaptics Touchpad"

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "অনুগ্রহ করে মাউসটি পরীক্ষা করুন"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "মাউসটি সক্রিয় করার জন্য,"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "আপনার মাউসের চাকাটি ঘোরান!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "ওয়েব সার্ভার"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "ডোমেইন নেম সার্ভার (DNS)"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "SSH সার্ভার"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "FTP সার্ভার"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "মেইল সার্ভার"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP & IMAP সার্ভার"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "টেলনেট সার্ভার"

# সাম
#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "উইন্ডোজ ফাইলস শেয়ারিং (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "CUPS সার্ভার"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "Echo request (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "বিটTorrent"

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""
"ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n"
"\n"
"এটি এই ম্যান্ড্রিব লিনাক্স মেশিনের জন্য একটী ব্যক্তিগত ফায়ারওয়াল কন্‌ফিগার করবে।\n"
"একটি শক্তিশালী এবং একান্তভাবে নিযুক্ত ফায়ারওয়াল সমাধানের জন্য, অনুগ্রহ করে\n"
"বিশেষ ম্যান্ড্রিব নিরাপত্তা ফায়ারওয়াল ডিস্ট্রিবিউশনে দেখুন।"

#: network/drakfirewall.pm:164
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n"
"\n"
"নিশ্চিত হোন যে অন্য কিছু ব্যবহারের আগেই আপনি আপনার নেটওয়ার্ক/ইন্টারনেট প্রবেশ\n"
"drakconnect দিয়ে কন্‌ফিগার করেছেন।"

#: network/drakfirewall.pm:181
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "আপনার কোন কোন সার্ভিসগুলোকে ইন্টারনেট থেকে সংযুক্ত হবার ক্ষমতা দিতে চান?"

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"আপনি একটি miscellaneous পোর্ট দিন। \n"
"সঠিক উদাহরণ হচ্ছে: ১৩৯/tcp ১৩৯/udp ৬০০:৬১০/tcp ৬০০:৬১০/udp।\n"
"তথ্যের জন্য /etc/services দেখুন।"

#: network/drakfirewall.pm:188
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"ভুল পোর্ট দেয়া হয়েছে: %s।\n"
"সঠিক ফরম্যাট হচ্ছে \"port/tcp\" বা \"port/udp\", \n"
"যেখানে পোর্ট হচ্ছে ১ এবং ৬৫৫৩৫ এর মধ্যে।\n"
"\n"
"আপনি পোর্টের সীমাও দিয়ে দিতে পারেন (যেমন: 24300:24350/udp)"

#: network/drakfirewall.pm:198
#, c-format
msgid "Everything (no firewall)"
msgstr "সবকিছু (কোন ফায়ারওয়াল ছাড়া)"

#: network/drakfirewall.pm:200
#, c-format
msgid "Other ports"
msgstr "অন্যান্য পোর্ট"

#: network/isdn.pm:118 network/netconnect.pm:450 network/netconnect.pm:537
#: network/netconnect.pm:540 network/netconnect.pm:683
#: network/netconnect.pm:687
#, c-format
msgid "Unlisted - edit manually"
msgstr "তালিকায় অন্তর্ভুক্ত নেই - নিজে নিজেই সম্পাদন করুন"

#: network/isdn.pm:161 network/netconnect.pm:382
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:161 network/netconnect.pm:382
#, c-format
msgid "I do not know"
msgstr "আমি জানি না"

#: network/isdn.pm:162 network/netconnect.pm:382
#, c-format
msgid "PCI"
msgstr "পি-সি-আই"

#: network/isdn.pm:163 network/netconnect.pm:382
#, c-format
msgid "USB"
msgstr "ইউএসবি"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:581 network/netconnect.pm:598
#: network/netconnect.pm:614
#, c-format
msgid "Manual"
msgstr "হাতে হাতে"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

# সাম
#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr "উইন্ডোজ ড্রাইভারটি বেছে নিন (.inf ফাইল)"

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:480
#: network/netconnect.pm:487
#, c-format
msgid "Manual choice"
msgstr "হাতে হাতে পছন্দ"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "ইন্টার্নাল ISDN কার্ড"

#: network/netconnect.pm:80 printer/printerdrake.pm:1418 standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "স্বনির্বাচিত কনফিগারেশন"

#: network/netconnect.pm:81
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "সয়ংক্রিয় IP (BOOTP/DHCP)"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "সয়ংক্রিয় IP (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "বাকী বিশ্বের জন্য প্রটোকল"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "ইউরোপীয় প্রটোকল (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"বাকী বিশ্বের জন্য প্রটকোল\n"
"কোন D-Channel ছাড়াই (ভাড়া নেয়া লাইনসমূহ)"

#: network/netconnect.pm:121 network/thirdparty.pm:185
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch ইউএসবি মডেম"

#: network/netconnect.pm:122
#, c-format
msgid "Sagem USB modem"
msgstr "Sagem ইউএসবি মডেম"

#: network/netconnect.pm:123