# Copyright (C) 2004 Free Software Foundation, Inc. # Omi Azad , 2004. # Khandakar Mujahidul Islam , 2004. # Progga , 2004. # Jamil Ahmed , 2004, 2005. # Samia , 2005. # msgid "" msgstr "" "Project-Id-Version: DrakX HEAD\n" "POT-Creation-Date: 2005-07-18 19:19+0200\n" "PO-Revision-Date: 2005-03-19 23:18+0600\n" "Last-Translator: Samia \n" "Language-Team: Bangla \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "আপনি কোন ইউএসবি ডিস্ক ফরম্যাট করতে চান?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "আপনি একটি ইউএসবি যন্ত্র \"%s\" ফরম্যাট করতে যাচ্ছেন। সেটি এটাতে থাকা সব তথ্য মুছে " "ফেলবে।\n" "নিশ্চিত হোন যে চিহ্নিত যন্ত্রটিই সেই ইউএসবি যন্ত্র যা আপনি ফরম্যাট করতে চান। \n" "আমাদের পরামর্শ হচ্ছে এই কাজ করার সময় অন্যান্য ইউএসবি স্টোরেজ জন্য খুলে ফেলুন।" #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "ডিস্ক লেখবার উপযোগী না" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে।\n" "অনুগ্রহ করে এটা আন-প্লাগ করে রইট প্রটেকশন অপসরন করে\n" "আবার ইউএসবি ডিস্ক প্লাগ-ইন করুন।" #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "আবার চেষ্টা" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "ইউএসবি ডিস্ক ছাড়াই অগ্রসর হও" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandriva Move again." msgstr "" "মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে, কিন্তু এখন\n" "আমরা নিরাপদভাবে এটা আন-প্লাগও করতে পারছিনা।\n" "\n" "\n" "এই বাটনে ক্লিক করে আপনার মেশিন রিবুট করে ইউএসবি ডিস্ক\n" "আনপ্লাগ করুন এবং রইট প্রটেকশন অপসরন করে আবার\n" "ইউএসবি ডিস্ক প্লাগ-ইন করে ম্যান্ড্রিব মুভ চালু করুন।" #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319 #, c-format msgid "Reboot" msgstr "রিবুট" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" "আপনার ইউএসবি ডিস্কে কোন উইন্ডোজ (FAT) পার্টিশন নেই।\n" "অগ্রসর হওয়ার জন্য আমাদের উইন্ডোজ (FAT) পার্টিশনের প্রয়োজন\n" "(যেহেতু উইন্ডোজ চালিত মেশিনসমূহ থেকে ফাইল নিতে বা ব্যবহার\n" "করার জন্য এটাই সবচাইতে আদর্শ উপায়)। অনুগ্রহ করে\n" "এই ইউএসবি ডিস্ক বদলে উইন্ডোজ (FAT) পার্টিশন সম্বলিত একটি ইউএসবি ডিস্ক\n" "সংযুক্ত করুন।\n" "\n" "\n" "আপনি ইউএসবি Key ছাড়াই অগ্রসর হতে পারেন - এখনো আপনি\n" "ম্যান্ড্রিব মুভকে সাধারণ লাইভ ম্যান্ড্রিব অপারেটিং সিস্টেম\n" "হিসেবে ব্যবহার করতে পারবেন।" #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandriva Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandriva Move as a normal live Mandriva\n" "Operating System." msgstr "" "আমরা আপনার সিস্টেমে কোন ইউএসবি ড্রাইভ সনাক্ত করতে\n" "পারি নাই। আপনা যদি এখন একটু ইউএসবি ড্রাইভ প্লাগ-ইন\n" "করেন তাহলে এই কম্পিউটারে অথবা অন্য কোন\n" "কম্পিউটারে পরবর্তি বুটের জন্য ম্যান্ড্রিব মুভ আপনার\n" "সিস্টেমের কনফিগারেশন এবং হোম ডিরেক্টরির\n" "ফাইলসমূহ সেখানে সংরক্ষণ করতে পারবে।\n" "দ্রষ্টব্য: যদি আপনি এখন একটি ইউএসবি ড্রাইভ প্লাগ-ইন\n" "করেন, তাহলে কিছুক্ষণ অপেক্ষার করতে হবে\n" "চিহ্নিত করার জন্য।\n" "\n" "\n" "আপনি ইউএসবি ড্রাইভ ছাড়াই অগ্রসর হয়ে ম্যান্ড্রিব \n" "মুভকে সাধারন লাইভ ম্যান্ড্রিব অপরেটিং সিস্টেম\n" "হিসেবে ব্যবহার করতে পারেন।" #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "আপনার ডেটা সংরক্ষনের জন্য একটি ডিস্কের প্রয়োজন" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "আবারও একটি ইউএসবি ডিস্ক সনাক্ত হয়েছে" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "ইউএসবি ডিস্ক সেট করা হচ্ছে" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "" "অনুগ্রহ করে অপেক্ষা করুন, ইউএসবি ডিস্কে সিস্টেম কনফিগারেশন ফাইল সেট করা হচ্ছে..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "স্ক্রীন সেভারে ব্যবহারের জন্য ব্যবহারকারীর তথ্য, পাসওয়ার্ড প্রবেশ করান" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "স্বয়ংক্রিয় কনফিগারেশন" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "অনুগ্রহ করে অপেক্ষা করুন, ডিভাইসগুলি সনাক্ত এবং কনফিগার করা হচ্ছে..." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230 #: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404 #: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558 #: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209 #: install_any.pm:1730 install_any.pm:1782 install_steps.pm:81 #: install_steps_interactive.pm:37 interactive/http.pm:117 #: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42 #: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 #: network/netconnect.pm:819 network/netconnect.pm:923 #: network/netconnect.pm:927 network/netconnect.pm:931 #: network/netconnect.pm:936 network/netconnect.pm:1066 #: network/netconnect.pm:1070 network/netconnect.pm:1074 #: network/netconnect.pm:1078 network/netconnect.pm:1186 #: network/netconnect.pm:1191 network/netconnect.pm:1211 #: network/netconnect.pm:1364 network/thirdparty.pm:267 #: network/thirdparty.pm:274 network/thirdparty.pm:310 #: network/thirdparty.pm:312 network/thirdparty.pm:333 #: network/thirdparty.pm:357 printer/printerdrake.pm:244 #: printer/printerdrake.pm:251 printer/printerdrake.pm:276 #: printer/printerdrake.pm:422 printer/printerdrake.pm:427 #: printer/printerdrake.pm:440 printer/printerdrake.pm:450 #: printer/printerdrake.pm:514 printer/printerdrake.pm:641 #: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399 #: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481 #: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499 #: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672 #: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680 #: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787 #: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805 #: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924 #: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042 #: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069 #: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089 #: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247 #: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042 #: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596 #: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604 #: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305 #: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592 #: standalone/drakTermServ:393 standalone/drakTermServ:467 #: standalone/drakTermServ:476 standalone/drakTermServ:771 #: standalone/drakTermServ:778 standalone/drakTermServ:801 #: standalone/drakTermServ:848 standalone/drakTermServ:1056 #: standalone/drakTermServ:1536 standalone/drakTermServ:1552 #: standalone/drakTermServ:1557 standalone/drakTermServ:1565 #: standalone/drakTermServ:1577 standalone/drakTermServ:1598 #: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612 #: standalone/drakbackup:1090 standalone/drakbackup:1122 #: standalone/drakbackup:1645 standalone/drakbackup:1801 #: standalone/drakbackup:2415 standalone/drakbackup:4104 #: standalone/drakbackup:4324 standalone/drakclock:124 #: standalone/drakconnect:672 standalone/drakconnect:676 #: standalone/drakconnect:681 standalone/drakconnect:696 #: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakgw:217 #: standalone/drakgw:258 standalone/drakgw:292 standalone/drakgw:394 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260 #: standalone/draknfs:623 standalone/draknfs:630 standalone/draknfs:637 #: standalone/drakroam:41 standalone/draksplash:15 standalone/draksplash:159 #: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "ত্রুটি" #: ../move/move.pm:605 install_steps.pm:82 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "একটি ত্রুটি সম্পাদিত হয়েছে, কিন্তু আমি বুঝতে পারছিনা\n" "কিভাবে এটা সন্দরভাবে হ্যান্ডল করবো।\n" "আপনি নিজের ঝুঁকিতে অগ্রসর হতে পারেন।" #: ../move/move.pm:660 install_steps_interactive.pm:37 #, c-format msgid "An error occurred" msgstr "একটি ত্রুটি সম্পাদিত হয়েছে" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandriva Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "একটি ত্রুটি সম্পাদিত হয়েছে:\n" "\n" "\n" "%s\n" "\n" "ইউএসবি ডিস্কের থাকা নষ্ট কনফিগারেশন ফাইলের কারনে\n" "এরকম হতে পারে, সেরকম হলে সেগুলি অপসরণ করে\n" "ম্যান্ড্রিব মুভ চালালে সমস্যার সমাধান হতে পারে।\n" "সেরকম করার জন্য নির্ধারিত বাটনটিতে ক্লিক করুন।\n" "\n" "\n" "আপনি হয়তো রিবুট করে ইউএসবি ড্রাইভ রিমুভ করে\n" "কন্টেন্টগুলি অন্য OS-এ নিয়ে পর্যবেক্ষন করতে চান, অথবা\n" "কনসল #3 এবং #4-এ দেখে আন্দাজ করার চেষ্টা করতে\n" "পারেন কি হয়েছে।" #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "সিস্টেম কনফিগ ফাইলসমূহ অপসরণ করো" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "শুধু রিবুট করো" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "আপনি কোন সিডিরম সাপোর্ট ছাড়াই শুধু রান করতে পারেন" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "ঐ সমস্থ প্রোগ্রামকে মেরে ফেলো" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "সিডিরমের কোন সাপোর্ট নেই" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92 #: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1056 #: diskdrake/interactive.pm:1109 #, c-format msgid "Read carefully!" msgstr "সতর্কতার সাথে পড়ো!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "নিম্নবর্তি প্রোগ্রামগুলি চলাকালীন আপনি অন্য সিডিরম ব্যবহার করতে পারবেননা:\n" "%s" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "সিডিরম অপসরণ করার জন্য মেমরীতে কপি করে নেয়া হচ্ছে" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "২৫৬ কেবি" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "৫১২ কেবি" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "১ এমবি" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "২ এমবি" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "৪ এমবি" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "৮ এমবি" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "১৬ এমবি" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "৩২ এমবি" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "৬৪ এমবি অথবা আরও বেশী" #: Xconfig/card.pm:155 #, c-format msgid "X server" msgstr "X সার্ভার" #: Xconfig/card.pm:156 #, c-format msgid "Choose an X server" msgstr "একটি X সার্ভার পছন্দ করুন" #: Xconfig/card.pm:188 #, c-format msgid "Multi-head configuration" msgstr "Multi-head কনফিগারেশন" #: Xconfig/card.pm:189 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "আপনার সিস্টেম Multiple Head কনফিগারেশন সাপোর্ট করে।\n" "আপনা কি করতে চান?" #: Xconfig/card.pm:258 #, c-format msgid "Can not install Xorg package: %s" msgstr "Xorg প্যাকেজ ইনস্টল করা যাচ্ছেনা: %s" #: Xconfig/card.pm:268 #, c-format msgid "Select the memory size of your graphics card" msgstr "আপনার গ্রাফিক কার্ডের জন্য মেমরী সাইজ নির্ধারন করুন" #: Xconfig/card.pm:345 #, c-format msgid "Xorg configuration" msgstr "Xorg কনফিগারেশন" #: Xconfig/card.pm:347 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Xorg-এর কোন কনফিগারেশন আপনি রাখতে চান?" #: Xconfig/card.pm:380 #, c-format msgid "Configure all heads independently" msgstr "সমস্থ head-গুলিকে আলাদাভাবে কনফিগার কারো" #: Xconfig/card.pm:381 #, c-format msgid "Use Xinerama extension" msgstr "Xinerama এক্সটেনশন ব্যবহার করো" #: Xconfig/card.pm:386 #, c-format msgid "Configure only card \"%s\"%s" msgstr "শুধু \"%s\"%s কার্ড কনফিগ করো" #: Xconfig/card.pm:398 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:405 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "3D হার্ডওয়্যারের গতি সম্পন্ন %s Xorg" #: Xconfig/card.pm:407 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "আপনি Xorg %s-এ 3D হার্ডওয়্যারের গতির সুবিধা উপভোগ করতে পারেন।" #: Xconfig/card.pm:413 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "পরীক্ষামূলক 3D হার্ডওয়্যারের গতির সাথে Xorg %s" #: Xconfig/card.pm:415 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "আপনার কার্ডটি Xfree %s-এর মাধ্যমে 3D হার্ডওয়্যারের গতি পেতে পারে,\n" "লক্ষ্য রাখবেন যে এটা একটি পরীক্ষামূলক সাপোর্ট এবং আপনার কম্পিউটার অচল হয়ে যেতে " "পারে।" #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963 #, c-format msgid "Custom" msgstr "ব্যবস্থা" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:85 install_steps_interactive.pm:1319 #: printer/printerdrake.pm:744 printer/printerdrake.pm:4401 #: printer/printerdrake.pm:4853 standalone/drakhosts:266 #: standalone/draksplash:85 standalone/logdrake:173 standalone/net_applet:85 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "বাহির" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "গ্রাফিক কার্ড" #: Xconfig/main.pm:120 Xconfig/monitor.pm:110 #, c-format msgid "Monitor" msgstr "মনিটর" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286 #, c-format msgid "Resolution" msgstr "রেজুলেশন" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "পরীক্ষা" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #: standalone/drakfont:491 standalone/drakfont:553 #, c-format msgid "Options" msgstr "অপশন" # সাম: broken কি সেন্সে ব্যবহৃত হয়েছে? # অসম্পূর্ণ নাকি corrupt? #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "আপনার Xorg কনফিগারেশন ফাইলটি অসম্পূর্ণ, এটি অগ্রাহ্য করছি। " #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "পরিবর্নগুলি রাখব?\n" "বর্তমান কনফিগারেশনগুলি হচ্ছে:\n" "\n" "%s" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor for head #%d" msgstr "Head #%d -এর জন্য একটি মনিটর পছন্দ করুন" #: Xconfig/monitor.pm:111 #, c-format msgid "Choose a monitor" msgstr "একটি মনিটর পছন্দ করুন" #: Xconfig/monitor.pm:117 #, c-format msgid "Plug'n Play" msgstr "প্লাগ'এন প্লে" #: Xconfig/monitor.pm:118 mouse.pm:49 #, c-format msgid "Generic" msgstr "সাধারন" #: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54 #: standalone/harddrake2:88 #, c-format msgid "Vendor" msgstr "পরিবেশক" #: Xconfig/monitor.pm:129 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "প্লাগ'এন প্লে অনুসন্ধান ব্যার্থ হয়েছে। অনুগ্রহ করে সঠিক মনিটর নির্বাচন করুন" #: Xconfig/monitor.pm:137 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "দুইটি জরুরী প্যারামিটার হচ্ছে উল্লম্ব রিফ্রেশ মাত্রা, যেই মাত্রাটি হচ্ছে\n" "যেটাতে সম্পূর্ণ স্ক্রীন রিফ্রেশ হয়, এবং সবচেয়ে বেশি প্রয়োজনীয় হচ্ছে আনুভূমিক\n" "sync মাত্রা, যেটাতে স্ক্যানলাইনগুলো প্রদর্শিত হয়।\n" "\n" "এটা খুব গুরুত্বপূর্ণ যে" #: Xconfig/monitor.pm:144 #, c-format msgid "Horizontal refresh rate" msgstr "Horizontal রিফ্রেশ রেট" #: Xconfig/monitor.pm:145 #, c-format msgid "Vertical refresh rate" msgstr "Vertical রিফ্রেশ রেট" #: Xconfig/resolution_and_depth.pm:10 #, c-format msgid "256 colors (8 bits)" msgstr "২৫৬ রঙ (৮ বিট)" #: Xconfig/resolution_and_depth.pm:11 #, c-format msgid "32 thousand colors (15 bits)" msgstr "৩২ হাজার রঙ (১৫ বিট)" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "65 thousand colors (16 bits)" msgstr "৬৫ হাজার রঙ (১৬ বিট)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "16 million colors (24 bits)" msgstr "১৬ লক্ষ রঙ (২৪ বিট)" #: Xconfig/resolution_and_depth.pm:127 #, c-format msgid "Resolutions" msgstr "রেজুলেশন" #: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336 #: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162 #: standalone/drakbackup:1583 standalone/drakperm:250 #, c-format msgid "Other" msgstr "অন্যান্য" #: Xconfig/resolution_and_depth.pm:357 #, c-format msgid "Choose the resolution and the color depth" msgstr "রঙের রেজুলেশন এবং গভীরতার পছন্দ করুন" #: Xconfig/resolution_and_depth.pm:358 #, c-format msgid "Graphics card: %s" msgstr "%s গ্রাফিক কার্ড" #: Xconfig/resolution_and_depth.pm:372 interactive.pm:432 #: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:200 standalone/drakTermServ:518 #: standalone/drakbackup:1347 standalone/drakbackup:3961 #: standalone/drakbackup:4021 standalone/drakbackup:4065 #: standalone/drakconnect:158 standalone/drakconnect:848 #: standalone/drakconnect:935 standalone/drakconnect:1031 #: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392 #: standalone/draksplash:169 standalone/drakups:212 standalone/net_monitor:340 #: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931 #, c-format msgid "Ok" msgstr "ঠিক আছে" #: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422 #: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 #: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3676 #: standalone/drakautoinst:215 standalone/drakbackup:1347 #: standalone/drakbackup:3887 standalone/drakbackup:3891 #: standalone/drakbackup:3949 standalone/drakconnect:157 #: standalone/drakconnect:933 standalone/drakconnect:1030 #: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741 #: standalone/draksplash:169 standalone/drakups:219 standalone/logdrake:173 #: standalone/net_monitor:339 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 #: ugtk2.pm:908 #, c-format msgid "Cancel" msgstr "বাতিল" #: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150 #: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527 #: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:285 #: standalone/drakbackup:3883 standalone/drakbug:105 #: standalone/drakconnect:153 standalone/drakconnect:236 #: standalone/drakfont:509 standalone/draknfs:208 standalone/drakperm:133 #: standalone/draksec:336 standalone/draksec:338 standalone/draksec:356 #: standalone/draksec:358 ugtk2.pm:1040 ugtk2.pm:1041 #, c-format msgid "Help" msgstr "সাহায্য" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "এই কনফিগারেশনটি পরীক্ষা করো" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "আপনি কি এই কনফিগারেশন পরীক্ষা করতে চান?" # Warning-এর বাংলা "নোটিশ" লিখলাম #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "নোটিশ: এই গ্রাফিক্স কার্ডটি পরীক্ষা করতে গিয়ে আপনার কম্পিউটারটি অচল হয়ে যেতে পারে" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "একটি ত্রুটি সাধিত হয়েছে:\n" "%s\n" "কিছু মান পরিবর্তনের চেষ্টা করুন" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "%d সেকেন্ডের মধ্যে বের হয়ে যাবে" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "এটাই কি সঠিক সেটিং?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "কীবোর্ড লে-আউট: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "%s ধরণের মাউস\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "মাউস ডিভাইস: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "মনিটর: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "মনিটরের HorizSync: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "মনিটরের VertRefresh: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "গ্রাফিক্স কার্ড: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "গ্রাফিক্স মেমরী: %s\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "রঙের গভীরতা: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "রেজুলেশন: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Xorg ড্রাইভার: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "শুরু থেকেই গ্রাফিকাল ইন্টারফস থাকবে" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "বুট হবার সাথে সাথে সয়ংক্রিয়ভাবে গ্রাফিকাল ইন্টারফেস চালু হবার জন্য আমি আপনার " "কম্পিউটার সেট করতে পারি।\n" "আপনি কি রিবুটের পরে Xorg চালু করতে চান?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "মনেহচ্চে আপনার গ্রাফিক কার্ডের টিভি-আউট কানেকটর আছে।\n" "ফ্রেম বাফার ব্যবহার করে কাজ করবার জন্য কনফিগার করা যাবে।\n" "\n" "এটার জন্য বুট করার আগে আপনার গ্রাফিক কার্ডকে টিভির সাথে সংযুক্ত করতে হবে।\n" "তারপরে বুটলোডারে \"TVout\" এন্ট্রি পছন্দ করতে হবে\n" "\n" "আপনার কি এই সুবিধাটি আছে?" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "আপনি কি ধরণের টিভি ব্যবহার করছেন?" # সাম: #: Xconfig/xfree.pm:646 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "অনান্য" #: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:245 #: standalone/service_harddrake:206 #, c-format msgid "Please wait" msgstr "অনুগ্রহ করে অপেক্ষা করুন" #: any.pm:142 #, c-format msgid "Bootloader installation in progress" msgstr "বুট লোডার ইনস্টল করা হচ্ছে" #: any.pm:153 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO %s ড্রাইভে একটি নতুন ভলিউম আই-ডি দিতে চায়। যাই হোক, উইন্ডোজ এন-টি,\n" "২০০০, অথবা এক্স-পি'র বুট ডিস্কের ভলিউম আই-ডি পরিবর্তনে এগুলো একটি দুর্ভাগ্যজনক " "উইন্ডোজ সমস্যা।\n" "নতুন একটি ভলিউম আই-ডি দেয়া হবে?" #: any.pm:164 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Bootloader ইনষ্টলেশন ব্যর্থ হয়েছে। এ সমস্ত ত্রুটি ঘটেছে:" #: any.pm:170 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "বুট-লোডার সক্রিয় করার আপনাকে আপনার ওপেন ফার্মওয়্যার বুট-যন্ত্র পরিবর্তন\n" " করতে হতে পারে। যদি রিবুট করার পর কোন বুটলোডার প্রম্প্‌ট না দেখেন, তাহলে\n" " রিবুটের কমান্ড অপশনে যান এবং টাইপ করুন: setenv boot-device %s,\\\\:tbxi\n" " তারপর টাইপ করুন: shut-down\n" "পরবর্তীতে বুট হওয়ার সময় বুটলোডার প্রম্প্‌ট দেখতে পাওয়া উচিত।" #: any.pm:208 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "আপনি একটি পার্টিশনে বুটলোডার ইনস্টল করার সিন্ধান্ত নিয়েছেন।\n" "আপনাকে জানানো যাচ্ছে যে যেই হার্ড ড্রাইভ থেকে বুট করেন সেটাতে আগে থেকেই বুটলোডার " "আছে\n" "(যেমন: সিস্টেম কমান্ডার)।\n" "\n" "আপনি কোন ড্রাইভ থেকে বুট করছেন?" #: any.pm:231 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "ড্রাইভের প্রথম সেক্টর (MBR)" #: any.pm:232 #, c-format msgid "First sector of the root partition" msgstr "রুট পার্টিশনের প্রথম সেক্টর" #: any.pm:234 #, c-format msgid "On Floppy" msgstr "ফ্লপি তে" #: any.pm:236 help.pm:739 printer/printerdrake.pm:4061 #, c-format msgid "Skip" msgstr "উপেক্ষা" #: any.pm:240 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub ইনস্টলেশন" #: any.pm:241 #, c-format msgid "Where do you want to install the bootloader?" msgstr "আপনি bootloader টি কোথায় ইনস্টল করতে চান?" #: any.pm:267 standalone/drakboot:261 #, c-format msgid "Boot Style Configuration" msgstr "বুটের ধরণ কনফিগারেশন" #: any.pm:269 any.pm:301 #, c-format msgid "Bootloader main options" msgstr "বুটলোডারের আসল অপশনসমুহ" #: any.pm:273 #, c-format msgid "Give the ram size in MB" msgstr "মেগাবাইটে র‌্যমের সাইজ প্রদান করুন" #: any.pm:275 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "``নিয়ন্ত্রিত কমান্ড লাইন অপশন'' অপশনটি পাসওয়ার্ড ছাড়া ব্যবহার করা যাবে না" #: any.pm:276 any.pm:609 authentication.pm:181 #, c-format msgid "The passwords do not match" msgstr "পাসওয়ার্ডটি মিলছে না" #: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1306 #, c-format msgid "Please try again" msgstr "অনুগ্রহ করে আবার চেষ্ট করুন" #: any.pm:281 any.pm:304 #, c-format msgid "Bootloader to use" msgstr "ব্যবহারের জন্য বুটলোডার" #: any.pm:283 any.pm:306 #, c-format msgid "Boot device" msgstr "বুট ডিভাইস" #: any.pm:285 #, c-format msgid "Delay before booting default image" msgstr "স্বাভাবিক ইমেজ লোড করার আগে দেরী করো" #: any.pm:286 #, c-format msgid "Enable ACPI" msgstr "ACPI এনেবল করো" #: any.pm:288 #, c-format msgid "Force no APIC" msgstr "APIC-র অনুপস্থিতিতে জোর দাও" #: any.pm:290 #, c-format msgid "Force No Local APIC" msgstr "স্থানীয়ভাবে APIC-র অনুপস্থিতিতে জোর দাও" #: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179 #: network/netconnect.pm:573 printer/printerdrake.pm:1663 #: printer/printerdrake.pm:1784 standalone/drakbackup:1627 #: standalone/drakbackup:3490 standalone/drakups:299 #, c-format msgid "Password" msgstr "পাসওয়ার্ড" #: any.pm:293 any.pm:644 authentication.pm:187 #, c-format msgid "Password (again)" msgstr "পাসওয়ার্ড (পুনরায়)" #: any.pm:294 #, c-format msgid "Restrict command line options" msgstr "কমান্ডলইন অপশনে বাঁধা দাও" #: any.pm:294 #, c-format msgid "restrict" msgstr "বাঁধা দাও" #: any.pm:296 #, c-format msgid "Clean /tmp at each boot" msgstr "প্রতি বুটে /tmp পরিষ্কার করো" #: any.pm:297 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "যদি প্রয়োজন হয় যথাযথ RAM লাগবে (পাওয়া গেছে %d RAM)" #: any.pm:305 #, c-format msgid "Init Message" msgstr "Init বার্তা" #: any.pm:307 #, c-format msgid "Open Firmware Delay" msgstr "বিলম্বিত ওপেন ফার্মওয়্যার" #: any.pm:308 #, c-format msgid "Kernel Boot Timeout" msgstr "কার্নাল বুটের সময় অতিক্রান্ত হয়েছে" #: any.pm:309 #, c-format msgid "Enable CD Boot?" msgstr "সিডি বুট সক্রিয় করা হবে?" #: any.pm:310 #, c-format msgid "Enable OF Boot?" msgstr "OF বুট সক্রিয় করা হবে?" #: any.pm:311 #, c-format msgid "Default OS?" msgstr "স্বাভাবিক অবস্থায় ব্যবহৃত OS?" #: any.pm:364 #, c-format msgid "Image" msgstr "ইমেজ" #: any.pm:365 any.pm:375 #, c-format msgid "Root" msgstr "Root" #: any.pm:366 any.pm:388 #, c-format msgid "Append" msgstr "যুক্ত" #: any.pm:368 standalone/drakboot:263 standalone/drakboot:267 #, c-format msgid "Video mode" msgstr "ভিডিওর ধরণ" #: any.pm:370 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:371 #, c-format msgid "Network profile" msgstr "নেটওয়ার্ক প্রোফাইল" #: any.pm:380 any.pm:385 any.pm:387 #, c-format msgid "Label" msgstr "শিরোনাম" #: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/draksec:52 #, c-format msgid "Default" msgstr "স্বাভাবিক" #: any.pm:389 #, c-format msgid "Initrd-size" msgstr "Initrd-র সাইজ" #: any.pm:391 #, c-format msgid "NoVideo" msgstr "কোন ভিডিও নেই" #: any.pm:402 #, c-format msgid "Empty label not allowed" msgstr "খালি শিরোনাম গ্রহণযোগ্য নয়" #: any.pm:403 #, c-format msgid "You must specify a kernel image" msgstr "আপনাকে অবশ্যই একটি কার্নালের ইমেজ নির্ধারণ করে দিতে হবে" #: any.pm:403 #, c-format msgid "You must specify a root partition" msgstr "আপনাকে অবশ্যই একটি রুট পার্টিশন নির্ধারণ করে দিতে হবে" #: any.pm:404 #, c-format msgid "This label is already used" msgstr "এই শিরোনামটি আগেই ব্যবহার হয়েছে" #: any.pm:418 #, c-format msgid "Which type of entry do you want to add?" msgstr "আপনি কি ধরণের এন্ট্রি যোগ করতে চান?" #: any.pm:419 #, c-format msgid "Linux" msgstr "লিনাক্স" #: any.pm:419 #, c-format msgid "Other OS (SunOS...)" msgstr "অন্যান্য OS (SunOS...)" #: any.pm:420 #, c-format msgid "Other OS (MacOS...)" msgstr "অন্যান্য OS (MacOS...)" #: any.pm:420 #, c-format msgid "Other OS (Windows...)" msgstr "অন্যান্য OS (Windows...)" #: any.pm:448 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "এপর্যন্ত আপনার বুটমেনুর এন্ট্রিগুলি এখানে।\n" "আপনি অন্যান্য এন্ট্রি তৈরী করতে পারেন অথবা আগের এন্ট্রিগুলি পরিবর্তন করতে পারেন।" #: any.pm:595 #, c-format msgid "access to X programs" msgstr "X প্রোগ্রামসমূহে প্রবেশাধিকার" #: any.pm:596 #, c-format msgid "access to rpm tools" msgstr "RPM টুলে প্রবেশাধিকার" #: any.pm:597 #, c-format msgid "allow \"su\"" msgstr "\"su\" গ্রহন করো" #: any.pm:598 #, c-format msgid "access to administrative files" msgstr "এডমিনিষ্ট্রেশন সংক্রান্ত ফাইলে প্রবেশাধিকার" #: any.pm:599 #, c-format msgid "access to network tools" msgstr "নেটওয়ার্ক টুলে প্রবেশাধিকার" #: any.pm:600 #, c-format msgid "access to compilation tools" msgstr "compilation টুলে প্রবেশাধিকার" #: any.pm:605 #, c-format msgid "(already added %s)" msgstr "(%s আগেই যোগ করা হয়েছে)" #: any.pm:610 #, c-format msgid "This password is too simple" msgstr "পাসওয়ার্ডটা খুবই সাধারণ" #: any.pm:611 #, c-format msgid "Please give a user name" msgstr "অনুগ্রহ করে একটি উইজার নেম দিন" #: any.pm:612 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "ইউজারনেমে অবশ্যই ছোটহাতের অক্ষর, নম্বর \"-\" এবং \"_\" থাকতে হবে" #: any.pm:613 #, c-format msgid "The user name is too long" msgstr "ইউজারনেমটি অনেক বড়" #: any.pm:614 #, c-format msgid "This user name has already been added" msgstr "এই ইউজারনেমটি এর আগেই যোগ করা হয়েছে" #: any.pm:615 any.pm:646 #, c-format msgid "User ID" msgstr "ব্যবহারকারীর ID" #: any.pm:616 any.pm:647 #, c-format msgid "Group ID" msgstr "দলের ID" #: any.pm:619 #, fuzzy, c-format msgid "%s must be a number" msgstr "অপশন %s-কে অবশ্যই একটি সংখ্যা হতে হবে!" #: any.pm:620 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "" #: any.pm:625 #, c-format msgid "Add user" msgstr "ইউজার যোগ করো" #: any.pm:626 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "একটি ইউজার প্রবেশ করান\n" "%s" #: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:197 #: printer/printerdrake.pm:382 printer/printerdrake.pm:4853 #: standalone/drakbackup:2703 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "হয়েছে" #: any.pm:630 help.pm:51 #, c-format msgid "Accept user" msgstr "ইউজার গ্রহন করো" #: any.pm:641 #, c-format msgid "Real name" msgstr "আসল নাম" #: any.pm:642 standalone/drakbackup:1622 #, c-format msgid "Login name" msgstr "লগ-ইন নাম" #: any.pm:645 #, c-format msgid "Shell" msgstr "শেল" #: any.pm:649 #, c-format msgid "Icon" msgstr "আইকন" #: any.pm:696 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "সয়ংক্রিয় লগ-ইন" #: any.pm:697 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "আমি আপনার কম্পিউটারকে সয়ংক্রিয়ভাবে একটি ইউজারকে লগইন করার জন্য সেট করতে পারি।" #: any.pm:698 #, fuzzy, c-format msgid "Use this feature" msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?" #: any.pm:699 #, c-format msgid "Choose the default user:" msgstr "স্বাভাবিক ব্যবহারকারীকে পছন্দ করুন:" #: any.pm:700 #, c-format msgid "Choose the window manager to run:" msgstr "রান করার জন্য উইন্ডো ম্যানেজারকে পছন্দ করুন:" #: any.pm:712 any.pm:779 #, c-format msgid "Please choose a language to use." msgstr "ব্যবহার করার জন্য একটি ভাষা পছন্দ করুন" #: any.pm:713 any.pm:780 #, c-format msgid "Language choice" msgstr "পছন্দনীয় ভাষা" #: any.pm:740 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandriva Linux বাভিন্ন ভাষা সমর্থন করে।\n" "আপনি যেই ভাষাটি ইনস্টল করতে চান তা পছন্দ করুন।\n" "ইনস্টল শেষে রি-স্টার্ট করার পরে সেই ভাষাগুলি উপলব্ধ হবে।" #: any.pm:759 any.pm:788 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "স্বাভাবিকভাবে ইউনিকোড ব্যবহার করো" #: any.pm:760 help.pm:647 #, c-format msgid "All languages" msgstr "সমস্থ ভাষা" #: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952 #, c-format msgid "Country / Region" msgstr "দেশ / স্থান" #: any.pm:836 #, c-format msgid "Please choose your country." msgstr "অনুগ্রহ করে তোমার দেশ পছন্দ করো।" #: any.pm:838 #, c-format msgid "Here is the full list of available countries" msgstr "উপলব্ধ সমস্থ দেশের নাম এখানে রয়েছে" #: any.pm:839 #, c-format msgid "Other Countries" msgstr "অন্যান্য দেশসমুহ" #: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:393 #, c-format msgid "Advanced" msgstr "উন্নত" #: any.pm:847 #, c-format msgid "Input method:" msgstr "ইনপুট মাধ্যম:" #: any.pm:848 install_any.pm:421 network/netconnect.pm:154 #: network/netconnect.pm:314 network/netconnect.pm:319 #: network/netconnect.pm:1177 printer/printerdrake.pm:105 #: printer/printerdrake.pm:2199 #, c-format msgid "None" msgstr "একটিও না" #: any.pm:963 #, c-format msgid "No sharing" msgstr "শেয়ারিং নেই" #: any.pm:963 #, c-format msgid "Allow all users" msgstr "সব ব্যবহারকারীদের গ্রহণ করো" #: any.pm:967 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "আপনি কি ব্যবহারকারীদের কিছু ডিরেক্টরি শেয়ার করতে দিতে চান?\n" #: any.pm:979 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: ঐতিহ্যগত ইউনিক্স ফাইল শেয়ারিং সিস্টেম, যা ম্যাক এবং উইন্ডোজে স্বল্প সমর্থিত।" #: any.pm:982 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: উইন্ডোজ, ম্যাক ও-এস এক্স এবং অনেক আধুনিক লিনাক্স সিস্টেম কর্তৃক ব্যবহৃত ফাইল " "শেয়ারিং সিস্টেম।" #: any.pm:990 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "আপনি NFS বা SMB ব্যবহার করে ফাইল পাঠাতে পারেন। যেটি আপনি ব্যবহার করতে চান " "অনুগ্রহ করে নির্বাচন করুন।" #: any.pm:1015 #, c-format msgid "Launch userdrake" msgstr "userdrake শুরু করো" #: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903 #: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905 #: printer/printerdrake.pm:5162 standalone/drakTermServ:295 #: standalone/drakbackup:4083 standalone/drakbug:126 standalone/drakfont:497 #: standalone/drakroam:242 standalone/net_monitor:118 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "বন্ধ" #: any.pm:1017 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "প্রত্যেক ব্যবহারকারী গ্রুপের \"ফাইল ভাগাভাগি\" ভাগাভাগি করতে পারেন। \n" "এই গ্রুপে একজণ ব্যবহারকারী যোগ করতে আপনি userdrake ব্যবহার করতে পারেন।" #: authentication.pm:23 #, c-format msgid "Local file" msgstr "লোকাল ফাইল" #: authentication.pm:24 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:25 #, c-format msgid "NIS" msgstr "NIS" # সাম #: authentication.pm:26 #, c-format msgid "Smart Card" msgstr "স্মার্ট কার্ড" #: authentication.pm:27 authentication.pm:152 #, c-format msgid "Windows Domain" msgstr "উইন্ডোজ ডোমেইন" #: authentication.pm:28 #, c-format msgid "Active Directory with SFU" msgstr "SFU যুক্ত সক্রিয় ডিরেক্টরি" #: authentication.pm:29 #, c-format msgid "Active Directory with Winbind" msgstr "WinBind যুক্ত সক্রিয় ডিরেক্টরি" #: authentication.pm:55 #, c-format msgid "Local file:" msgstr "লোকাল ফাইল:" #: authentication.pm:55 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" "লোকাল ফাইলে থাকা ব্যবহারকারীর সকল বিশ্বাসযোগ্যতা ও তথ্যের জন্য লোকাল ব্যবহার করুন" #: authentication.pm:56 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:56 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" "কিছু অথবা সব নির্ভরযোগ্যতার আপনার কম্পিউটারকে LDAP ব্যবহার করতে বলুন। LDAP আপনার " "অর্গানাইজেশনের বিভিন্ন ধরনের তথ্যকে আরও সুদৃড় করে" #: authentication.pm:57 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:57 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" "সার্বজনীন পাসওয়ার্ড ও গ্রুপ ফাইলসহ আপনি কম্পিউটারের একটি গ্রুপকে একই নেটওয়ার্ক তথ্য " "সার্ভিস ডোমেইনে চলার অনুমতি দেবে।" #: authentication.pm:58 #, c-format msgid "Windows Domain:" msgstr "উইন্ডোজ ডোমেইন:" #: authentication.pm:58 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "উইনবাইন্ড আপনার সিস্টেমকে একটি উইন্ডোজ ডোমেইনের তথ্য ও নির্ভরযোগ্য ব্যবহারকারীদের " "পুনরুদ্ধারের অনুমতি দেবে।" #: authentication.pm:59 #, c-format msgid "Active Directory with SFU:" msgstr "SFU যুক্ত সচল ডিরেক্টরি:" #: authentication.pm:59 authentication.pm:60 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "নেটওয়ার্কের নির্ভরযোগ্য সার্ভিস প্রদানের জন্য Kerberos একটি নিরাপদ সিস্টেম।" #: authentication.pm:60 #, c-format msgid "Active Directory with Winbind:" msgstr "Winbind যুক্ত সচল ডিরেক্টরি:" #: authentication.pm:85 #, c-format msgid "Authentication LDAP" msgstr "LDAP অনুমোদন" #: authentication.pm:86 #, c-format msgid "LDAP Base dn" msgstr "LDAP বেইজ dn" #: authentication.pm:87 share/compssUsers.pl:102 #, c-format msgid "LDAP Server" msgstr "LDAP সার্ভার" #: authentication.pm:100 fsedit.pm:23 #, c-format msgid "simple" msgstr "সাধারণ" #: authentication.pm:101 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:102 #, c-format msgid "SSL" msgstr "এসএসএল" #: authentication.pm:103 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "নিরাপত্তা লে-আউট (SASL/Kerberos)" #: authentication.pm:110 authentication.pm:148 #, c-format msgid "Authentication Active Directory" msgstr "নির্ভরযোগ্য সচল ডিরেক্টরি" #: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180 #, c-format msgid "Domain" msgstr "ডোমেইন" #: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:141 share/compssUsers.pl:82 #: standalone/drakTermServ:270 #, c-format msgid "Server" msgstr "সার্ভার" #: authentication.pm:114 #, c-format msgid "LDAP users database" msgstr "LDAP ব্যবহারকারীদের ডাটাবেজ" #: authentication.pm:115 #, c-format msgid "Use Anonymous BIND " msgstr "Anonymous বাইন্ড ব্যবহার করুন " #: authentication.pm:116 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "LDAP ব্যবহারকারী সচল ডিরেক্টরি ব্রাউজ করার অনুমতি দিয়েছে" #: authentication.pm:117 #, c-format msgid "Password for user" msgstr "ব্যবহারকারীর পাসওয়ার্ড" #: authentication.pm:118 #, c-format msgid "Encryption" msgstr "এনক্রিপশন" #: authentication.pm:129 #, c-format msgid "Authentication NIS" msgstr "NIS অনুমোদন" #: authentication.pm:130 #, c-format msgid "NIS Domain" msgstr "NIS ডোমেইন" #: authentication.pm:131 #, c-format msgid "NIS Server" msgstr "NIS সার্ভার" #: authentication.pm:136 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "এটার জন্য W2K PDC কাজ করতে, আপনার সম্ভবত admin চালু করার প্রয়োজন হবে: C:\\>net " "localgroup \"Pre-Windows 2000 Compatible Access\" সবাইকে /যুক্ত করতে এবং " "সার্ভার রিবুট করতে হবে।\n" "উইন্ডোজ(TM) ডোমেইনে যুক্ত হওয়ার জন্য আপনাকে ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম/" "পাসওয়ার্ডও দিতে হবে।\n" "যদি নেটওয়ার্কিং এরই মধ্যে চালু না হয়ে থাকে, তাহলে নেটওয়ার্ক সেটআপ করার পর Drakx " "ডোমেইনে যুক্ত হতেচেষ্টা করবে।\n" "যদি কোন কারণে এইসেটআপ ব্যর্থ হয় এবং ডোমেইন অনুমোদন কাজ না করে, তাহলে আপনার " "উইন্ডোজ(TM) ডোমেইনব্যবহার করতে 'smbpasswd -j DOMAIN -U USER%%PASSWORD' চালান, " "এবং সিস্টেম বুট হবার পরঅ্যাডমিন ব্যবহারকারীনাম/পাসওয়ার্ড দিন।\n" "'wbinfo -t' কমান্ডটি আপনার অনুমোদিত গোপনীয়তা ভাল কিনা পরীক্ষা করে দেখবে।" #: authentication.pm:148 #, c-format msgid "Authentication Windows Domain" msgstr "অনুমোদিত উইন্ডোজ ডোমেইন" #: authentication.pm:153 #, c-format msgid "Domain Admin User Name" msgstr "ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম" #: authentication.pm:154 #, c-format msgid "Domain Admin Password" msgstr "ডোমেইন অ্যাডমিনের পাসওয়ার্ড" #: authentication.pm:155 #, c-format msgid "Use Idmap for store UID/SID " msgstr "UID/SID জমা করার জন্য Idmap ব্যবহার করুন " #: authentication.pm:156 #, c-format msgid "Default Idmap " msgstr "ডিফল্ট Idmap" # sam: authentication #: authentication.pm:170 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "" "আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড এবং নেটওয়ার্ক পরিচয় প্রমাণ প্রক্রিয়ার নীতিমালা " "সেট করুন" #: authentication.pm:171 #, c-format msgid "Set administrator (root) password" msgstr "আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড সেট করুন" #: authentication.pm:172 standalone/drakvpn:1111 #, c-format msgid "Authentication method" msgstr "নির্ভরযোগ্য নিয়ম" # -PO: keep this short or else the buttons will not fit in the window #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:177 help.pm:722 #, c-format msgid "No password" msgstr "পাসওয়ার্ড ছাড়া" #: authentication.pm:183 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "এই পাসওয়ার্ডটি খুবই ছোট (এটা অবশ্যই %d অক্ষরের হতে হবে)" #: authentication.pm:188 network/netconnect.pm:319 network/netconnect.pm:574 #: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481 #, c-format msgid "Authentication" msgstr "অনুমোদন" #: authentication.pm:307 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "কোন NIS ডোমেইন ছাড়া ব্রডকাষ্ট ব্যবহার করা যাবেনা" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:753 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" #: bootloader.pm:853 #, c-format msgid "LILO with graphical menu" msgstr "গ্রাফিকাল মেনুর সাথে LILO" #: bootloader.pm:854 #, c-format msgid "LILO with text menu" msgstr "টেক্সট মেনুর সাথে LILO" #: bootloader.pm:855 #, c-format msgid "Grub with graphical menu" msgstr "" #: bootloader.pm:856 #, c-format msgid "Grub with text menu" msgstr "" #: bootloader.pm:857 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:935 #, c-format msgid "not enough room in /boot" msgstr "/boot -এ বেশী জায়গা নেই" #: bootloader.pm:1414 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "আপনি %s পার্টিশনে বুটলোডার ইনস্টল করতে পারবেননা\n" # renumber = রি-নাম্বার লিখলাম। আসলটা আমি জানিনা #: bootloader.pm:1448 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "পার্টিশন রি-নাম্বার করার কারনে আপনার বুটলোডারের কনফিগারেশন অবশ্যই আপডেট করতে হবে" #: bootloader.pm:1461 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "বুটলোডার সঠিকভাবে ইনস্টল হতে পারবেনা। আপনাকে rescue বুট করতে হবে এবং \"%s\" " "পছন্দ করতে হবে" #: bootloader.pm:1462 #, c-format msgid "Re-install Boot Loader" msgstr "বুট লোডার রি-ইনস্টল করো" #: common.pm:131 #, c-format msgid "KB" msgstr "কেবি" #: common.pm:131 #, c-format msgid "MB" msgstr "এমবি" #: common.pm:131 #, c-format msgid "GB" msgstr "জিবি" #: common.pm:139 #, c-format msgid "TB" msgstr "টিবি" #: common.pm:147 #, c-format msgid "%d minutes" msgstr "%d মিনিট" #: common.pm:149 #, c-format msgid "1 minute" msgstr "১ মিনিট" #: common.pm:151 #, c-format msgid "%d seconds" msgstr "%d সেকেন্ড" #: common.pm:253 #, c-format msgid "kdesu missing" msgstr "kdesu পাওয়া যাচ্ছে না" #: common.pm:256 #, c-format msgid "consolehelper missing" msgstr "consolehelper পাওয়া যাচ্ছে না" #: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66 #: network/adsl_consts.pm:75 network/adsl_consts.pm:84 #, c-format msgid "Austria" msgstr "অষ্ট্রিয়া" #: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "অষ্ট্রেলিয়া" #: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93 #: network/adsl_consts.pm:102 network/adsl_consts.pm:114 #: network/adsl_consts.pm:123 network/netconnect.pm:44 #, c-format msgid "Belgium" msgstr "বেলজিয়াম" #: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132 #: network/adsl_consts.pm:143 network/adsl_consts.pm:152 #: network/adsl_consts.pm:161 #, c-format msgid "Brazil" msgstr "ব্রাজিল" #: crypto.pm:17 crypto.pm:51 lang.pm:230 #, c-format msgid "Canada" msgstr "কানাডা" #: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891 #: network/adsl_consts.pm:900 network/adsl_consts.pm:911 #, c-format msgid "Switzerland" msgstr "সুইজারল্যান্ড" #: crypto.pm:19 lang.pm:242 #, c-format msgid "Costa Rica" msgstr "কোষ্টা রিকা" #: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368 #, c-format msgid "Czech Republic" msgstr "চেক রিপাবলিক" #: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499 #: network/adsl_consts.pm:508 #, c-format msgid "Germany" msgstr "জার্মানী" #: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378 #, c-format msgid "Denmark" msgstr "ডেনমার্ক" #: crypto.pm:23 crypto.pm:54 lang.pm:256 #, c-format msgid "Estonia" msgstr "এস্তোনিয়া" #: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759 #: network/adsl_consts.pm:770 network/adsl_consts.pm:781 #: network/adsl_consts.pm:792 network/adsl_consts.pm:801 #: network/adsl_consts.pm:810 network/adsl_consts.pm:819 #: network/adsl_consts.pm:828 network/adsl_consts.pm:837 #: network/adsl_consts.pm:846 network/adsl_consts.pm:855 #: network/adsl_consts.pm:864 network/adsl_consts.pm:873 #, c-format msgid "Spain" msgstr "স্পেন" #: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387 #, c-format msgid "Finland" msgstr "ফিনল্যান্ড" #: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396 #: network/adsl_consts.pm:408 network/adsl_consts.pm:420 #: network/adsl_consts.pm:431 network/adsl_consts.pm:442 #: network/adsl_consts.pm:454 network/adsl_consts.pm:466 #: network/adsl_consts.pm:477 network/adsl_consts.pm:488 #: network/netconnect.pm:41 #, c-format msgid "France" msgstr "ফ্রান্স" #: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519 #, c-format msgid "Greece" msgstr "গ্রীস" #: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528 #, c-format msgid "Hungary" msgstr "হাঙ্গেরী" #: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537 #: standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "আয়ারল্যান্ড" #: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546 #, c-format msgid "Israel" msgstr "ইসরাঈল" #: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557 #: network/adsl_consts.pm:569 network/adsl_consts.pm:580 #: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "ইতালী" #: crypto.pm:32 crypto.pm:63 lang.pm:303 #, c-format msgid "Japan" msgstr "জাপান" #: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620 #: network/adsl_consts.pm:629 network/adsl_consts.pm:638 #: network/adsl_consts.pm:647 network/netconnect.pm:42 #, c-format msgid "Netherlands" msgstr "নেদারল্যান্ড" #: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656 #: network/adsl_consts.pm:661 network/adsl_consts.pm:666 #: network/adsl_consts.pm:671 network/adsl_consts.pm:676 #: network/adsl_consts.pm:681 network/adsl_consts.pm:686 #, c-format msgid "Norway" msgstr "নরওয়ে" #: crypto.pm:35 crypto.pm:65 lang.pm:357 #, c-format msgid "New Zealand" msgstr "নিউজিল্যান্ড" #: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693 #: network/adsl_consts.pm:704 #, c-format msgid "Poland" msgstr "পোল্যান্ড" #: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716 #, c-format msgid "Portugal" msgstr "পর্তুগাল" #: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725 #, c-format msgid "Russia" msgstr "রাশিয়া" #: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882 #, c-format msgid "Sweden" msgstr "সুইডেন" #: crypto.pm:40 crypto.pm:70 lang.pm:387 #, c-format msgid "Slovakia" msgstr "স্লোভাকিয়া" #: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920 #, c-format msgid "Thailand" msgstr "থাইল্যান্ড" #: crypto.pm:42 crypto.pm:75 lang.pm:411 #, c-format msgid "Taiwan" msgstr "তাইওয়ান" #: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "দক্ষিন আফ্রিকা" #: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45 #, c-format msgid "United States" msgstr "যুক্তরাষ্ট্র" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV একটি প্রোটোকল যা আপনাকে স্থানীয়ভাবে একটি ওয়েব সার্ভারের ডিরেক্টরি মাউন্ট " "করার অনুমতি\n" "দেয়, এবং এটাকে একটি স্থানীয় ফাইলসিস্টেম হিসেবে মনে করুন(সরবরাহকৃত ওয়েব সার্ভারটি " "WebDAV সার্ভার\n" "হিসেবে কন্‌ফিগার করা)। যদি আপনি WebDAV মাউন্ট পয়েন্ত যুক্ত করতে চান, তবে \"নতুন\" " "বেছে নিন।" #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "নতুন" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74 #, c-format msgid "Unmount" msgstr "আন-মাউন্ট" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Mount" msgstr "মাউন্ট" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:446 #: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78 #, c-format msgid "Mount point" msgstr "মাউন্ট পয়েন্ট" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "অনুগ্রহ করে WebDAV সার্ভারের URL প্রবেশ করান" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL অবশ্যই http:// অথবা https:// দিয়ে শুরু করতে হবে" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "সার্ভার:" #: diskdrake/dav.pm:110 diskdrake/interactive.pm:521 #: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1266 #, c-format msgid "Mount point: " msgstr "মাউন্ট পয়েন্ট:" #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1273 #, c-format msgid "Options: %s" msgstr "অপশন: %s" #: diskdrake/hd_gtk.pm:92 #, c-format msgid "Please make a backup of your data first" msgstr "অনুগ্রহ করে প্রথমে আপনার ডাটার একটি ব্যাকআপ করে নিন" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "আপনি যদি aboot ব্যবহার করার পরিকল্পনা করে থাকেন, তাহলে ডিষ্কের শুরুতে সাবধানতার " "সাথে খালি\n" "জায়গা ছেড়ে দিন (২০৪৮ সেক্টরই যথেষ্ট)" #: diskdrake/hd_gtk.pm:152 help.pm:530 #, c-format msgid "Wizard" msgstr "সাহায্যকারী" #: diskdrake/hd_gtk.pm:185 #, c-format msgid "Choose action" msgstr "কার্য পছন্দ করুন" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "আপনার একটি বড় মাইক্রসফ্ট উইন্ডোজ পার্টিশন আছে।\n" "সেটাকে আগে রি-সাইজ করার জন্য আমি পরামর্শ দিচ্ছি\n" "(সেটাকে আগে ক্লিক করুন এবং পরে \"Resize\"-এ ক্লিক করুন)" #: diskdrake/hd_gtk.pm:191 #, c-format msgid "Please click on a partition" msgstr "অনুগ্রহ করে একটি পার্টিশনে ক্লিক করুন" #: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482 #: standalone/drakbackup:2938 standalone/drakbackup:2998 #, c-format msgid "Details" msgstr "বিস্তারিত" #: diskdrake/hd_gtk.pm:251 #, c-format msgid "No hard drives found" msgstr "কোন হার্ড ড্রাইভ পাওয়া যায়নি" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Journalised FS" msgstr "FS জার্নালাইজ করা হয়েছে" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Swap" msgstr "সোয়াপ" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:335 #, c-format msgid "Windows" msgstr "উইন্ডোজ" #: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1203 #, c-format msgid "Empty" msgstr "শূণ্য" #: diskdrake/hd_gtk.pm:340 #, c-format msgid "Filesystem types:" msgstr "ফাইল সিস্টেমের ধরণ:" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``%s'' instead" msgstr "পরিবর্তে ``%s'' ব্যবহার করুন" #: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470 #, c-format msgid "Create" msgstr "তৈরী করো" #: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365 #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:108 standalone/harddrake2:117 #, c-format msgid "Type" msgstr "ধরণ" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455 #: standalone/drakperm:123 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "মুছে ফেলো" #: diskdrake/hd_gtk.pm:365 #, c-format msgid "Use ``Unmount'' first" msgstr "প্রথমে ``Unmount'' ব্যবহার করুন" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose another partition" msgstr "অন্য একটি পার্টিশন পছন্দ করুন" #: diskdrake/interactive.pm:194 #, c-format msgid "Choose a partition" msgstr "একটি পার্টিশন পছন্দ করুন" #: diskdrake/interactive.pm:223 #, c-format msgid "Exit" msgstr "বাহির" #: diskdrake/interactive.pm:256 help.pm:530 #, c-format msgid "Undo" msgstr "পূর্বাবস্থা" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to normal mode" msgstr "সাধারণ মোডে বদল করো" #: diskdrake/interactive.pm:256 #, c-format msgid "Toggle to expert mode" msgstr "দক্ষ মোডে বদল করো" #: diskdrake/interactive.pm:275 #, c-format msgid "Continue anyway?" msgstr "অগ্রসর হবে?" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without saving" msgstr "সংরক্ষণ ছাড়াই বের হও" #: diskdrake/interactive.pm:280 #, c-format msgid "Quit without writing the partition table?" msgstr "কোন পার্টিশন টেবিল না লিখেই বের হয়ে যাব?" #: diskdrake/interactive.pm:285 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "আপনি /etc/fstab -এর পরিবর্তন সেভ করতে চান?" #: diskdrake/interactive.pm:292 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "পার্টিশন টেবিলের পরিবর্তনগুলি কার্যকর করবার জন্য আপনাকে রা-ষ্টার্ট করতে হবে" # সাম #: diskdrake/interactive.pm:297 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "পার্টিশন %s ফরম্যাট করা প্রয়োজন।\n" "অন্যথা fstab এ মাউন্ট পয়েন্ট %s এর কোন এন্ট্রি লেখা হবে না।\n" "তবুও বের হয়ে যাব কি?" #: diskdrake/interactive.pm:310 help.pm:530 #, c-format msgid "Clear all" msgstr "সব বন্ধ করো" #: diskdrake/interactive.pm:311 help.pm:530 #, c-format msgid "Auto allocate" msgstr "সয়ংক্রিয়ভাবে সাজানো" #: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:121 #, c-format msgid "More" msgstr "আরও" #: diskdrake/interactive.pm:317 #, c-format msgid "Hard drive information" msgstr "হার্ড ড্রাইভের তথ্য" #: diskdrake/interactive.pm:349 #, c-format msgid "All primary partitions are used" msgstr "সমস্থ প্রাইমারী পার্টিশনসমূহ ব্যবহৃত হচ্ছে" #: diskdrake/interactive.pm:350 #, c-format msgid "I can not add any more partitions" msgstr "আমি আর পার্টিশন যোগ করতে পারবনা" #: diskdrake/interactive.pm:351 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "আরও পার্টিশন পাওয়ার জন্য, অনুগ্রহ করে একটি মুছে ফেলুন যাতে করে এক্সটেনডেড পার্টিশন " "তৈরী করা যায়" #: diskdrake/interactive.pm:360 #, c-format msgid "No supermount" msgstr "" #: diskdrake/interactive.pm:361 #, c-format msgid "Supermount" msgstr "" #: diskdrake/interactive.pm:362 #, c-format msgid "Supermount except for CDROM drives" msgstr "" #: diskdrake/interactive.pm:368 help.pm:530 #, c-format msgid "Save partition table" msgstr "পার্টিশন টেবিল সংরক্ষিত করো" #: diskdrake/interactive.pm:369 help.pm:530 #, c-format msgid "Restore partition table" msgstr "পার্টিশন টেবিল রিষ্টোর করো" # ;) #: diskdrake/interactive.pm:370 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "পার্টিশন টেবিলকে বাঁচাও" #: diskdrake/interactive.pm:372 help.pm:530 #, c-format msgid "Reload partition table" msgstr "পার্টিশন টেবিলকে পুনরায় লোড করো" #: diskdrake/interactive.pm:374 #, c-format msgid "Removable media automounting" msgstr "রিমুভেবল মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে" #: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413 #, c-format msgid "Select file" msgstr "ফাইল সিলেক্ট করো" #: diskdrake/interactive.pm:399 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "ব্যাকআপ পার্টিশন সমান সাইজের ছিলনা\n" "এখনো এগুবো?" #: diskdrake/interactive.pm:428 #, c-format msgid "Trying to rescue partition table" msgstr "পার্টিশন টেবিল বাঁচানো হচ্ছে" #: diskdrake/interactive.pm:434 #, c-format msgid "Detailed information" msgstr "বিস্তারিত তথ্য" #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760 #, c-format msgid "Resize" msgstr "আকার পরিবর্তন" #: diskdrake/interactive.pm:450 #, c-format msgid "Format" msgstr "ফরম্যাট" #: diskdrake/interactive.pm:452 #, c-format msgid "Add to RAID" msgstr "RAID-তে যোগ করো" #: diskdrake/interactive.pm:453 #, c-format msgid "Add to LVM" msgstr "LVM-এ যোগ করো" #: diskdrake/interactive.pm:456 #, c-format msgid "Remove from RAID" msgstr "RAID থেকে মুছে ফেলো" #: diskdrake/interactive.pm:457 #, c-format msgid "Remove from LVM" msgstr "LVM থেকে মুছে ফেলো" #: diskdrake/interactive.pm:458 #, c-format msgid "Modify RAID" msgstr "RAID পরিবর্তন করো" #: diskdrake/interactive.pm:459 #, c-format msgid "Use for loopback" msgstr "loopback-এর জন্য ব্যবহার করো" #: diskdrake/interactive.pm:514 #, c-format msgid "Create a new partition" msgstr "একটি নতুন পার্টিশন তৈরী করো" #: diskdrake/interactive.pm:517 #, c-format msgid "Start sector: " msgstr "শুরুর সেক্টর:" #: diskdrake/interactive.pm:519 diskdrake/interactive.pm:926 #, c-format msgid "Size in MB: " msgstr "মেগাবাইটে সাইজ:" #: diskdrake/interactive.pm:520 diskdrake/interactive.pm:927 #, c-format msgid "Filesystem type: " msgstr "ফাইলসিস্টেমের ধরণ:" #: diskdrake/interactive.pm:525 #, c-format msgid "Preference: " msgstr "পছন্দ" #: diskdrake/interactive.pm:528 #, c-format msgid "Logical volume name " msgstr "লজিকাল ভলিউমের নাম" #: diskdrake/interactive.pm:558 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "আপনি কোন নতুন পার্টিশন তৈরী করতে পারবেন না\n" "(যেহেতু আপনি সর্বোচ্চ প্রাইমারী পার্টিশনের সীমায় পৌছে গিয়েছেন)।\n" "প্রথমে আপনাকে একটি প্রাইমারী পার্টিশন অপসরন করতে হবে এবং তারপরে এক্সটেনডেড " "পার্টিশন তৈরী করতে হবে।" #: diskdrake/interactive.pm:588 #, c-format msgid "Remove the loopback file?" msgstr "লুকআপ ফাইল রিমুভ করবো?" #: diskdrake/interactive.pm:607 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "%s পার্টিশনের ধরণ পরিবর্তনের পরে সেটার সমস্থ ডাটা হারিয়ে যাবে" #: diskdrake/interactive.pm:619 #, c-format msgid "Change partition type" msgstr "পার্টিশনের ধরণ পরিবর্তন করো" #: diskdrake/interactive.pm:620 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "আপনি কোন ফাইলসিস্টেম চান?" #: diskdrake/interactive.pm:628 #, c-format msgid "Switching from ext2 to ext3" msgstr "ext2 থেকে ext3-তে পরিবর্তিত হচ্ছে" #: diskdrake/interactive.pm:657 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "আপনি %s লুপব্যাক ফাইলকে কোথায় মাউন্ট করতে চান ?" #: diskdrake/interactive.pm:658 #, c-format msgid "Where do you want to mount device %s?" msgstr "আপনি %s ডিভাইসকে কোথায় মাউন্ট করতে চান?" #: diskdrake/interactive.pm:663 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "এই পার্টিশনটি লুপব্যাকের জন্য ব্যবহৃত হওয়ার কারনে মাউন্টপয়েন্ট আনসেট করা যাবেনা।\n" " আগে লুপব্যাক রিমুভ করুন" #: diskdrake/interactive.pm:688 #, c-format msgid "Where do you want to mount %s?" msgstr "আপনি কোথায় মাউন্ট করতে চান %s?" #: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "আকার পরিবর্তন করা হচ্ছে" #: diskdrake/interactive.pm:712 #, c-format msgid "Computing FAT filesystem bounds" msgstr "FAT ফাইল সিস্টেমের সীমা (Bound) হিসেব করা হচ্ছে" #: diskdrake/interactive.pm:748 #, c-format msgid "This partition is not resizeable" msgstr "এই পার্টিশনটি রি-সাইজ করার মত না" #: diskdrake/interactive.pm:753 #, c-format msgid "All data on this partition should be backed-up" msgstr "এই পার্টিশনের সমস্থ ডাটা ব্যাকআপ করা উচিত্‍‌" #: diskdrake/interactive.pm:755 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "%s পার্টিশন রি-সাইজ করার পরে, এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে" #: diskdrake/interactive.pm:760 #, c-format msgid "Choose the new size" msgstr "নতুন সাইজটি পছন্দ করুন" #: diskdrake/interactive.pm:761 #, c-format msgid "New size in MB: " msgstr "মেগাবাইটে নতুন সাইজ:" #: diskdrake/interactive.pm:802 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "পার্টিশনের পুনরাকৃতির পর ডাটার সম্পূর্ণতা নিশ্চিত করার জন্য, \n" "উইন্ডোজে(TM) আপনার পরবর্তী বুটে ফাইলসিস্টেম পরীক্ষা চলবে" #: diskdrake/interactive.pm:840 #, c-format msgid "Choose an existing RAID to add to" msgstr "যোগ করার জন্য উপস্থিত একটি RAID পছন্দ করুন" #: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859 #, c-format msgid "new" msgstr "নতুন" #: diskdrake/interactive.pm:857 #, c-format msgid "Choose an existing LVM to add to" msgstr "যোগ করার জন্য উপস্থিত একটি LVM পছন্দ করুন" #: diskdrake/interactive.pm:863 #, c-format msgid "LVM name?" msgstr "LVM-এর নাম?" #: diskdrake/interactive.pm:891 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" #: diskdrake/interactive.pm:893 #, c-format msgid "Moving physical extents" msgstr "" #: diskdrake/interactive.pm:911 #, c-format msgid "This partition can not be used for loopback" msgstr "লুপব্যাকের জন্য এই পার্টিশনটি ব্যবহার করা যাবেনা" #: diskdrake/interactive.pm:924 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:925 #, c-format msgid "Loopback file name: " msgstr "Loopback ফাইলের নাম: " #: diskdrake/interactive.pm:930 #, c-format msgid "Give a file name" msgstr "একটি ফাইলের নাম দিন" #: diskdrake/interactive.pm:933 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "ফাইলটি আগে থেকেই অন্য একটি লুপব্যাকে ব্যবহৃত হচ্ছে, আরেকটি পছন্দ করুন" #: diskdrake/interactive.pm:934 #, c-format msgid "File already exists. Use it?" msgstr "ফাইল আগে থেকেই আছে, ব্যবহার করব?" #: diskdrake/interactive.pm:957 #, c-format msgid "Mount options" msgstr "মাউন্ট অপসন" #: diskdrake/interactive.pm:964 #, c-format msgid "Various" msgstr "বিভিন্ন" #: diskdrake/interactive.pm:1028 #, c-format msgid "device" msgstr "ডিভাইস" #: diskdrake/interactive.pm:1029 #, c-format msgid "level" msgstr "লেভেল" #: diskdrake/interactive.pm:1030 #, c-format msgid "chunk size in KiB" msgstr "কিলোবাইট এ chunk সাইজ" #: diskdrake/interactive.pm:1047 #, c-format msgid "Be careful: this operation is dangerous." msgstr "খুবই সাবধান: এই কাজটি ঝুঁকিপূর্ন।" #: diskdrake/interactive.pm:1062 #, c-format msgid "What type of partitioning?" msgstr "কি ধরণের পার্টিশন হবে?" #: diskdrake/interactive.pm:1100 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "পরিবর্তনগুলি অবস্থান নেবার জন্য আপনাকে রি-ষ্টার্ট করতে হবে" #: diskdrake/interactive.pm:1109 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "%s ড্রাইভের পার্টিশন টেবিল ডিস্কে লিখতে যাচ্ছি!" #: diskdrake/interactive.pm:1118 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "পার্টিশন %s -কে ফরমেট করার পরে এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে" #: diskdrake/interactive.pm:1134 #, c-format msgid "Move files to the new partition" msgstr "ফাইলগুলিক একটি নতুন পার্টিশনে সরিয়ে ফেলো" #: diskdrake/interactive.pm:1134 #, c-format msgid "Hide files" msgstr "ফাইল লুকানো হোক" #: diskdrake/interactive.pm:1135 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "%s ডিরেক্টরীতে আগে থেকেই ডাটা আছে\n" "(%s)" #: diskdrake/interactive.pm:1146 #, c-format msgid "Moving files to the new partition" msgstr "ফাইলগুলিকে একটু নতুন পার্টিশনে নিয়ে যাওয়া হচ্ছে" #: diskdrake/interactive.pm:1150 #, c-format msgid "Copying %s" msgstr "%s কপি করা হচ্ছে" #: diskdrake/interactive.pm:1154 #, c-format msgid "Removing %s" msgstr "%s মুছে ফেলা হচ্ছে" #: diskdrake/interactive.pm:1168 #, c-format msgid "partition %s is now known as %s" msgstr "পার্টিশন %s-কে এখন %s নামে জানা যাবে" # সাম: renumber = পুনর্বিন্যাস? #: diskdrake/interactive.pm:1169 #, c-format msgid "Partitions have been renumbered: " msgstr "পার্টিশনগুলো পুনঃসংখ্যান করা হয়েছে: " #: diskdrake/interactive.pm:1189 diskdrake/interactive.pm:1251 #, c-format msgid "Device: " msgstr "ডিভাইস:" #: diskdrake/interactive.pm:1190 #, c-format msgid "Devfs name: " msgstr "Devfs নাম:" #: diskdrake/interactive.pm:1191 #, c-format msgid "Volume label: " msgstr "ভলিউম লেবেল:" #: diskdrake/interactive.pm:1192 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS ড্রাইভ লেটার: %s (শুধুমাত্র একটি অনুমান)\n" #: diskdrake/interactive.pm:1196 diskdrake/interactive.pm:1205 #: diskdrake/interactive.pm:1269 #, c-format msgid "Type: " msgstr "ধরণ:" #: diskdrake/interactive.pm:1200 install_steps_gtk.pm:296 #, c-format msgid "Name: " msgstr "নাম:" #: diskdrake/interactive.pm:1207 #, c-format msgid "Start: sector %s\n" msgstr "শুরু: সেক্টর %s\n" #: diskdrake/interactive.pm:1208 #, c-format msgid "Size: %s" msgstr "সাইজ: %s" #: diskdrake/interactive.pm:1210 #, c-format msgid ", %s sectors" msgstr ", %s সেক্টরসমূহ" #: diskdrake/interactive.pm:1212 #, c-format msgid "Cylinder %d to %d\n" msgstr "সিলিন্ডার %d থেকে %d পর্যন্ত\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "Number of logical extents: %d\n" msgstr "" #: diskdrake/interactive.pm:1214 #, c-format msgid "Formatted\n" msgstr "ফরমেট করা হয়েছে\n" #: diskdrake/interactive.pm:1215 #, c-format msgid "Not formatted\n" msgstr "ফরমেট করা হয়নি\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "Mounted\n" msgstr "মাউন্ট করা হয়েছে\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1222 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "লুপব্যাক ফাইল(গুলি):\n" " %s\n" #: diskdrake/interactive.pm:1223 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "পার্টিশন সাধারণভাবে বুট হয়েছে\n" " (MS-DOS বুটের জনে, lilo-র জন্য নয়)\n" #: diskdrake/interactive.pm:1225 #, c-format msgid "Level %s\n" msgstr "লেভেল %s\n" #: diskdrake/interactive.pm:1226 #, c-format msgid "Chunk size %d KiB\n" msgstr "চাঙ্ক সাইজ %d কিলোবাইট\n" #: diskdrake/interactive.pm:1227 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-ডিস্কসমূহ %s\n" #: diskdrake/interactive.pm:1229 #, c-format msgid "Loopback file name: %s" msgstr "লুপব্যাক ফাইলের নাম: %s" #: diskdrake/interactive.pm:1232 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "কারণগুলো হতে পারে, এটি একটি\n" "ড্রাইভার পার্টিশন। আপনার উচিত হবে\n" "এটাকে এটা ছেড়ে দেয়া।\n" #: diskdrake/interactive.pm:1235 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "এই বিশেষ বুটস্ট্র্যাপ\n" "পার্টিশন হচ্ছে আপনার\n" "সিস্টেমের ডুয়াল-বুটিং এর জন্য।\n" #: diskdrake/interactive.pm:1252 #, c-format msgid "Read-only" msgstr "শুধুমাত্র পড়া যাবে" #: diskdrake/interactive.pm:1253 #, c-format msgid "Size: %s\n" msgstr "সাইজ: %s\n" #: diskdrake/interactive.pm:1254 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "জ্যামিতি: %s-গুলি সিলিন্ডার, %s-গুলি হেড, %s-গুলি সেক্টর\n" #: diskdrake/interactive.pm:1255 #, c-format msgid "Info: " msgstr "তথ্য:" #: diskdrake/interactive.pm:1256 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-ডিস্কসমূহ %s\n" #: diskdrake/interactive.pm:1257 #, c-format msgid "Partition table type: %s\n" msgstr "পার্টিশন টেবিলের ধরণ: %s\n" #: diskdrake/interactive.pm:1258 #, c-format msgid "on channel %d id %d\n" msgstr "%d চ্যানেলে %d আইডিতে\n" #: diskdrake/interactive.pm:1301 #, c-format msgid "Filesystem encryption key" msgstr "ফাইল সিস্টেমের এনক্রিপশন কী" #: diskdrake/interactive.pm:1302 #, c-format msgid "Choose your filesystem encryption key" msgstr "আপনার ফাইল সিস্টেমের এনক্রিপশন কী পছন্দ করুন" #: diskdrake/interactive.pm:1305 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "এই এনক্রিপশন কী টি খুবই সাধারণ (অবশ্যই %d অক্ষর বড় হতে হবে)" #: diskdrake/interactive.pm:1306 #, c-format msgid "The encryption keys do not match" msgstr "এনক্রিপশন কীগুলি মিলছেনা" #: diskdrake/interactive.pm:1309 network/netconnect.pm:1022 #: standalone/drakconnect:419 #, c-format msgid "Encryption key" msgstr "এনক্রিপশন কী" #: diskdrake/interactive.pm:1310 #, c-format msgid "Encryption key (again)" msgstr "এনক্রিপশন কী (পুনরায়)" #: diskdrake/interactive.pm:1311 standalone/drakvpn:1017 #: standalone/drakvpn:1102 #, c-format msgid "Encryption algorithm" msgstr "Encryption অ্যালগোরিদম" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "ধরণ বদল করো" #: diskdrake/smbnfs_gtk.pm:162 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "ইউজারনেম %s ব্যবহার করে লগইন করা গেলোনা (নষ্ট পাসওয়ার্ড?)" #: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175 #, c-format msgid "Domain Authentication Required" msgstr "ডোমেইন অনুমোদন প্রয়োজন" #: diskdrake/smbnfs_gtk.pm:167 #, c-format msgid "Which username" msgstr "কোন্‌ ব্যবহারকারীনাম" #: diskdrake/smbnfs_gtk.pm:167 #, c-format msgid "Another one" msgstr "অন্য একটি" #: diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "হোস্টকে ব্যবহার করার জন্য আপনার ব্যবহারকারীনাম, পাসওয়ার্ড এবং ডোমেইনের নাম প্রবেশ " "করান।" #: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489 #, c-format msgid "Username" msgstr "ব্যবহারকারীনাম" #: diskdrake/smbnfs_gtk.pm:204 #, c-format msgid "Search servers" msgstr "সার্ভার খোজো" #: diskdrake/smbnfs_gtk.pm:209 #, c-format msgid "Search new servers" msgstr "নতুন সার্ভারের খোজ করো" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "%s প্যাকেজগুলি ইনস্টল করা প্রয়োজন। আপনি কি ইনস্টল করতে চান?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "%s আবশ্যিক প্যাকেজ নেই" #: do_pkgs.pm:182 #, c-format msgid "Installing packages..." msgstr "প্যাকেজসমূহ ইনস্টল করা হচ্ছে..." #: do_pkgs.pm:227 #, c-format msgid "Removing packages..." msgstr "প্যাকেজসমূহ অপসরণ করা হচ্ছে..." #: fs/format.pm:57 fs/format.pm:64 #, c-format msgid "Formatting partition %s" msgstr "%s পার্টিশন ফরম্যাট করা হচ্ছে" #: fs/format.pm:61 #, c-format msgid "Creating and formatting file %s" msgstr "%s ফাইল তৈরী এবং ফরম্যাট করা হচ্ছে" #: fs/format.pm:114 #, c-format msgid "I do not know how to format %s in type %s" msgstr "আমার জানা নেই পার্টিশন %s-কে কিভাবে %s ধরণে ফরম্যাট করতে হয়" # এটাও উল্টে যাবে মানে করতে গেলে। কারন মানেটা দাঁড়াবে <দ্বিতীয় %s কে প্রথম %s ফরম্যাট করা ব্যার্থ হয়েছে> #: fs/format.pm:119 fs/format.pm:121 #, c-format msgid "%s formatting of %s failed" msgstr "%s কে %s ফরম্যাট করতে ব্যর্থ হয়েছে" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "সার্কুলার মাউন্টস %s\n" #: fs/mount.pm:72 #, c-format msgid "Mounting partition %s" msgstr "%s পার্টিশন মাউন্ট করা হচ্ছে" # এখানে কি করতে হবে? দুটোই %s কিন্তু মানেটা হবে : %s ডিরেক্টরিতে %s পার্টিশন মাউন্ট করা সম্ভব হলোনা। # দেখবেন কি করা যাবে... #: fs/mount.pm:73 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "%2$s ডিরেক্টরিতে %1$s পার্টিশন মাউন্ট করা ব্যর্থ হয়েছে" #: fs/mount.pm:78 fs/mount.pm:95 #, c-format msgid "Checking %s" msgstr "%s পরীক্ষা করা হচ্ছে" #: fs/mount.pm:111 partition_table.pm:385 #, c-format msgid "error unmounting %s: %s" msgstr "%s আনমাউন্টে সমস্যা: %s" # এনেবল লিখলাম। মানেটা মাথায় আসছেনা #: fs/mount.pm:140 #, c-format msgid "Enabling swap partition %s" msgstr "%s সোয়াপ পার্টিশন সক্রিয় করো" #: fs/mount_options.pm:111 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" # #msgstr "%2$s কে %1$s ফরম্যাট করা ব্যর্থ হয়েছে" #: fs/mount_options.pm:113 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "এই ফাইল সিস্টেমে inode প্রবেশ সময় আপডেট করবেন না\n" "(যেমন,নিউজ সার্ভার দ্রুত করতে নিউজ স্পুলে দ্রুত প্রবেশ)।" #: fs/mount_options.pm:116 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "শুধুমাত্র স্পষ্টভাবে মাউন্ট করতে পারে (যেমন,\n" ")(-a অপশন ফাইল সিস্টেম মাউন্ট করতে দেবে না)।" #: fs/mount_options.pm:119 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "কোন চিহ্ন বা বিশেষ ব্লক যন্ত্রকে ফাইল সিস্টেমে ব্যাখ্যা করবেন না।" #: fs/mount_options.pm:121 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "মাউন্টকৃত ফাইল সিস্টেমে কোন বাইনারি এক্সিকিউট করার অনুমতি দেবেন না।\n" "এই অপশন সেই সার্ভারের জন্য ব্যবহৃত হতে পারে যেখানে সে তার নিজের চেয়ে\n" "অন্যান্য আর্কিটেকচারের বাইনারিগুলো বেশি ধারণ করে।" #: fs/mount_options.pm:125 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "allow set-user-identifier বা set-group-identifier বিটগুলোকে কোন প্রভাব নেয়ার\n" "অনুমতি দেবেন না। (এটা যদিও নিরাপদ দেখাচ্ছে, কিন্তু অনিরাপদ হতে পারে যদি আপনার " "suidperl(1))\n" "ইনস্টল করা থাকে।)" #: fs/mount_options.pm:129 #, c-format msgid "Mount the file system read-only." msgstr "ফাইল সিস্টেমকে শুধু পড়ার জন্য মাউন্ট করো।" #: fs/mount_options.pm:131 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "সকল I/O ফাইল সিস্টেম যুগপত্‍ভাবে হওয়া উচিত।" #: fs/mount_options.pm:135 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "একজন সাধারণ ব্যবহারকারীকে ফাইল সিস্টেম মাউন্ট করার অনুমতি দিন। মাউন্টিং\n" "ব্যবহারকারীর নাম mtab এ লেখা থাকে সেকারণে সে পুনরায় \n" "ফাইল সিস্টেমকে আনমাউন্ট করতে পারে।\n" "এই অপশন পরোক্ষভাবে noexec, nosuid, এবং nodev অপশনকে প্রকাশ করে।" #: fs/mount_options.pm:141 #, c-format msgid "" "Enable user disk quota accounting enabled, and optionally enforce limits" msgstr "" #: fs/mount_options.pm:143 #, c-format msgid "Give write access to ordinary users" msgstr "সাধারণ ব্যবহারকারীদের লেখার ক্ষমতা দিন" #: fs/mount_options.pm:145 #, c-format msgid "Give read-only access to ordinary users" msgstr "সাধারণ ব্যবহারকারীদের শুধু পড়ার ক্ষমতা দিন" #: fs/type.pm:375 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "১৬ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি JFS ব্যবহার করতে পারবেন না" #: fs/type.pm:376 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "৩২ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি ReiserFS ব্যবহার করতে পারবেন না" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "/usr -এর সাথে" #: fsedit.pm:32 #, c-format msgid "server" msgstr "সার্ভার" #: fsedit.pm:210 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "আমি %s যন্ত্রের পার্টিশন টেবিল পড়তে পাচ্ছি না, এটা আমার জন্য খুবই কলুষিত :(\n" "আমি এর উপর দিয়ে কাজ করতে, নষ্ট পার্টশন মুছে ফেলতে চেষ্টা করব(সব ডাটা হারিয়ে " "যাবে!)।\n" "অন্য সমাধান হচ্ছে Drakx কে পার্টিশন টেবিল পরিবর্তন করার অনুমতি না দেয়া।\n" "(ভুল হচ্ছে %s)\n" "\n" "আপনি কি সব পার্টিশন হারাতে রাজি?\n" #: fsedit.pm:381 #, c-format msgid "Mount points must begin with a leading /" msgstr "মাউন্ট পয়েন্টগুলি অবশ্যই / দিয়ে শুরু হতে হবে" # * = alphanumerical = বাংলাটা মনে পড়ছেনা #: fsedit.pm:382 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "মাউন্ট পয়েন্টগুলিতে শুধু * অক্ষর থাকবে" #: fsedit.pm:383 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "এই পার্টিশনটি আগে থেকেই %s মাউন্টপয়েন্ট নামে আছে\n" #: fsedit.pm:385 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "আপনি একটি সফ্টওয়্যার RAID পার্টিশনকে রুট (/) হিসেবে নির্বাচন করেছেন।\n" "/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n" "অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন" #: fsedit.pm:390 #, c-format msgid "" "You can not use a LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" #: fsedit.pm:392 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" #: fsedit.pm:396 fsedit.pm:398 #, c-format msgid "This directory should remain within the root filesystem" msgstr "root ফাইল সিস্টেমের মধ্যে এই ডিরেক্টরি থাকা উচিত" #: fsedit.pm:400 fsedit.pm:402 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "এই মাউন্ট পয়েন্টের জন্য আপনার একটি সঠিক ফাইল সিস্টেম (ext2/ext3, reiserfs, xfs, " "বা jfs) প্রয়োজন\n" #: fsedit.pm:404 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "আপনি %s মাউন্ট পয়েন্টের জন্য একটি এনক্রিপটেড ফাইল ব্যবহার করতে পারবেন" #: fsedit.pm:465 #, c-format msgid "Not enough free space for auto-allocating" msgstr "স্বয়ংক্রিয়-বন্টনের জন্য কোন খালি জায়গা নেই" #: fsedit.pm:467 #, c-format msgid "Nothing to do" msgstr "কিছু করার নাই" #: harddrake/data.pm:62 install_any.pm:1665 #, c-format msgid "Floppy" msgstr "ফ্লপি" #: harddrake/data.pm:72 #, c-format msgid "Zip" msgstr "জিপ" #: harddrake/data.pm:88 install_any.pm:1666 #, c-format msgid "Hard Disk" msgstr "ডিস্ক" #: harddrake/data.pm:97 install_any.pm:1667 #, c-format msgid "CDROM" msgstr "সিডিরম" #: harddrake/data.pm:107 #, c-format msgid "CD/DVD burners" msgstr "সিডি/ডিভিডি রাইটিং সফ্টওয়্যার" #: harddrake/data.pm:117 #, c-format msgid "DVD-ROM" msgstr "ডিভিডি-রোম" #: harddrake/data.pm:127 standalone/drakbackup:2036 #, c-format msgid "Tape" msgstr "টেপ" #: harddrake/data.pm:136 #, c-format msgid "Videocard" msgstr "ভিডিওকার্ড" #: harddrake/data.pm:146 #, c-format msgid "DVB card" msgstr "" #: harddrake/data.pm:154 #, c-format msgid "Tvcard" msgstr "টিভিকার্ড" #: harddrake/data.pm:163 #, c-format msgid "Other MultiMedia devices" msgstr "অন্যান্য মাল্টিমিডিয়া ডিভাইস সমূহ" #: harddrake/data.pm:172 #, c-format msgid "Soundcard" msgstr "সাউন্ডকার্ড" #: harddrake/data.pm:185 #, c-format msgid "Webcam" msgstr "ওয়েব ক্যামেরা" #: harddrake/data.pm:199 #, c-format msgid "Processors" msgstr "প্রসেসর" #: harddrake/data.pm:209 #, c-format msgid "ISDN adapters" msgstr "ISDN এডোপ্টার সমূহ" #: harddrake/data.pm:220 #, c-format msgid "USB sound devices" msgstr "" #: harddrake/data.pm:229 #, c-format msgid "Radio cards" msgstr "" #: harddrake/data.pm:238 #, c-format msgid "ATM network cards" msgstr "" #: harddrake/data.pm:247 #, c-format msgid "WAN network cards" msgstr "" #: harddrake/data.pm:256 #, c-format msgid "Bluetooth devices" msgstr "" #: harddrake/data.pm:265 #, c-format msgid "Ethernetcard" msgstr "ইথারনেটকার্ড" #: harddrake/data.pm:282 network/netconnect.pm:488 #, c-format msgid "Modem" msgstr "মডেম" #: harddrake/data.pm:292 #, c-format msgid "ADSL adapters" msgstr "ADSL এডোপ্টার সমূহ" #: harddrake/data.pm:306 #, c-format msgid "Memory" msgstr "মেমরি" #: harddrake/data.pm:315 #, c-format msgid "AGP controllers" msgstr "AGP কন্ট্রোলার সমূহ" #: harddrake/data.pm:324 help.pm:186 help.pm:855 #: install_steps_interactive.pm:984 #, c-format msgid "Printer" msgstr "প্রিন্টার" #. -PO: these are joysticks controllers: #: harddrake/data.pm:338 #, c-format msgid "Game port controllers" msgstr "" #: harddrake/data.pm:347 #, c-format msgid "Joystick" msgstr "জয়ষ্টিক" #: harddrake/data.pm:357 #, c-format msgid "SATA controllers" msgstr "SATA কন্ট্রলারসমূহ" #: harddrake/data.pm:366 #, c-format msgid "RAID controllers" msgstr "RAID কন্ট্রলারসমূহ" #: harddrake/data.pm:375 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA কন্ট্রলারসমূহ" #: harddrake/data.pm:384 #, c-format msgid "Firewire controllers" msgstr "Firewire কন্ট্রলারসমূহ" #: harddrake/data.pm:393 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA কন্ট্রলারসমূহ" #: harddrake/data.pm:402 #, c-format msgid "SCSI controllers" msgstr "SCSI কন্ট্রলারসমূহ" #: harddrake/data.pm:411 #, c-format msgid "USB controllers" msgstr "ইউএসবি কন্ট্রলারসমূহ" #: harddrake/data.pm:420 #, c-format msgid "USB ports" msgstr "ইউএসবি পোর্টসমূহ" #: harddrake/data.pm:429 #, c-format msgid "SMBus controllers" msgstr "SMBus কন্ট্রলারসমূহ" #: harddrake/data.pm:438 #, c-format msgid "Bridges and system controllers" msgstr "ব্রীজ এবং সিস্টেম কন্ট্রোলার সমূহ" #: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117 #: install_steps_interactive.pm:944 standalone/keyboarddrake:29 #, c-format msgid "Keyboard" msgstr "কি-বোর্ড" #: harddrake/data.pm:460 #, c-format msgid "Tablet and touchscreen" msgstr "" #: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977 #, c-format msgid "Mouse" msgstr "মাউস" #: harddrake/data.pm:483 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:492 #, c-format msgid "Scanner" msgstr "স্কেনার" #: harddrake/data.pm:502 standalone/harddrake2:441 #, c-format msgid "Unknown/Others" msgstr "অজানা/অন্যান্য" #: harddrake/data.pm:530 #, c-format msgid "cpu # " msgstr "সিপিউ #" #: harddrake/sound.pm:190 standalone/drakconnect:162 #: standalone/drakconnect:637 #, c-format msgid "Please Wait... Applying the configuration" msgstr "অনুগ্রহ করে অপেক্ষা করুন.... কনফিগারেশন প্রস্তাব করা হচ্ছে" #: harddrake/sound.pm:226 #, c-format msgid "No alternative driver" msgstr "কোন বিকল্প ড্রাইভার নেই" # বিকল্প #: harddrake/sound.pm:227 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "আপনার সাউন্ড কার্ড (%s) যা আপনি বর্তমানে ব্যবহার \"%s\" করছেন তার জন্য পরিচিত অন্য " "কোন OSS/ALSA কোন ড্রাইভার নেই" #: harddrake/sound.pm:233 #, c-format msgid "Sound configuration" msgstr "সাউন্ড কনফিগারেশন" #: harddrake/sound.pm:235 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "এখানে আপনি আপনার সাউন্ড কার্ডের (%s) জন্য বিকল্প ড্রাইভার (হয় OSS অথবা ALSA) পছন্দ " "করতে পারেন।" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:240 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "আপনি বর্তমানে %s\"%s\" ড্রাইভার ব্যবহার করছেন (আপনার সাউন্ড কার্ডের স্বাভাবিক " "ড্রাইভার \"%s\")" #: harddrake/sound.pm:242 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) ছিল প্রথম সাউন্ড API. এটা হচ্ছে একটি ওএস স্বাধীন সাউন্ড " "API (এটা বেশিরভাগ UNIX(tm) সিস্টেমে পাওয়া যায়) কিন্তু এটা খুব সাধারণ এবং " "স্বল্পসংখ্যক API.\n" "নতুন আর কি, OSS ড্রাইভার সব চাকা নতুন করে তৈরি করে।\n" "\n" "ALSA (Advanced Linux Sound Architecture) হচ্ছে একটি নিয়ন্ত্রিত আর্কিটেকচার যা\n" "ISA, ইউএসবি এবং PCI cards এর একটি বড় সীমা সমর্থন করে।\n" "\n" "এটা OSS এর চেয়ে বেশি API প্রদান করে\n" "\n" "alsa ব্যবহার করতে, একজন ব্যবহার করতে পারে:\n" "- পুরাতন সমর্থিত OSS api\n" "- নতুন ALSA api যা অনেক সুবিধা প্রদান করে কিন্তু ALSA লাইব্রেরী কতৃক ব্যবহৃত।\n" #: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "ড্রাইভার" #: harddrake/sound.pm:261 #, c-format msgid "Trouble shooting" msgstr "ট্রাবল শুটিং" #: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078 #: network/ndiswrapper.pm:95 network/netconnect.pm:467 #: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230 #: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362 #: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464 #: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069 #: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310 #: standalone/drakTermServ:326 standalone/drakTermServ:1169 #: standalone/drakTermServ:1230 standalone/drakTermServ:1895 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125 #: standalone/drakclock:224 standalone/drakconnect:969 standalone/drakups:27 #: standalone/harddrake2:478 standalone/scannerdrake:51 #: standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "নোটিশ" #: harddrake/sound.pm:269 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "পুরাতন \"%s\" ড্রাইভার কালো তালিকা ভুক্ত।\n" "\n" "এটি কার্ণেল আনলোড করার সময় oops কে রিপোর্ট করে।\n" "\n" "নতুন \"%s\" শুধুমাত্র পরবর্তী বুটস্ট্র্যাপে ব্যবহৃত হবে।" #: harddrake/sound.pm:277 #, c-format msgid "No open source driver" msgstr "কোন ওপেন সোর্স ড্রাইভার নেই" #: harddrake/sound.pm:278 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "আপনার সাউন্ড কার্ডের (%s) জন্য কোন ফ্রী ড্রাইভার নেই, কিন্তু একটি অংশিদারী ড্রাইভার " "\"%s\"-এ আছে।" #: harddrake/sound.pm:281 #, c-format msgid "No known driver" msgstr "কোন পরিচিত ড্রাইভার নেই" #: harddrake/sound.pm:282 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "আপনার সাউন্ড কার্ড (%s)-এর জন্য কোন পরিচিত ড্রাইভার নেই" #: harddrake/sound.pm:286 #, c-format msgid "Unknown driver" msgstr "অপরিচিত ড্রাইভার" #: harddrake/sound.pm:287 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "ভুল: আপনার সাউন্ড কার্ডের \"%s\" ড্রাইভারটি তালিকায় নেই" #: harddrake/sound.pm:301 #, c-format msgid "Sound trouble shooting" msgstr "সাউন্ড ট্রাবল শুটিং" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:304 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "ক্লাসিক বাগ সাউন্ড পরীক্ষক নিম্নলিখিত কমান্ডগুলো চালু করে:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" ডিফল্টভাবে আপনার কার্ড যেই ড্রাইভার \n" "ব্যবহার করছে তা আপনাকে বলবে\n" "\n" "- \"grep sound-slot /etc/modules.conf\" আপনার বর্তমানে ব্যবহৃত \n" "ড্রাইভারের কথা বলবে\n" "\n" "- \"/sbin/lsmod\" যদি এর মডিউল (ড্রাইভার) লোড হয় বা না হয় তবে সে ব্যাপারে " "পরীক্ষা \n" "করতে আপনাকে সক্রিয় করে তুলবে\n" "\n" "- \"/sbin/chkconfig --list sound\" এবং \"/sbin/chkconfig --list alsa\" যদি\n" "সাউন্ড এবং alsa সার্ভিসগুলো initlevel 3 তে চলার জন্য কন্‌ফিগার করা থাকে তাহলে \n" "আপনাকে বলবে\n" "\n" "- \"aumix -q\" যদি সাউন্ড বন্ধ থাকে বা না থাকে তাহলে আপনাকে বলবে\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" কোন প্রোগ্রাম সাউন্ড কার্ড ব্যবহার করছে সেটা বলবে\n" #: harddrake/sound.pm:330 #, c-format msgid "Let me pick any driver" msgstr "আমাকে যেকোন ড্রাইভার নিতে দাও" #: harddrake/sound.pm:333 #, c-format msgid "Choosing an arbitrary driver" msgstr "ইচ্ছেমত ড্রাইভার পছন্দ" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:336 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "আপনি যদি মনে করেন যে কোন ড্রাইভার আপনার কার্ডের জন্য ঠিক হবে\n" "তাহলে উপরের লিষ্ট থেকে আপনি একটি পছন্দ করে নিতে পারেন।\n" "\n" "আপনার \"%s\"-এর বর্তমান ড্রাইভার \"%s\"" #: harddrake/v4l.pm:12 standalone/net_applet:67 standalone/net_applet:68 #: standalone/net_applet:70 #, c-format msgid "Auto-detect" msgstr "সয়ং-সনাক্ত" #: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296 #, c-format msgid "Unknown|Generic" msgstr "অজানা|সাধারণ" #: harddrake/v4l.pm:118 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "অজানা|CPH05X (bt878) [প্রচুর প্রস্তুতকারক]" #: harddrake/v4l.pm:119 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "অজানা|CPH06X (bt878) [প্রচুর প্রস্তুতকারক]" #: harddrake/v4l.pm:392 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "বেশিরভাগ আধুনিক টিভি কার্ডের ক্ষেত্রেই GNU/Linux -এর bttv মডিউল সঠিক প্যারামিটার " "সয়ং সনাক্ত করে।\n" "যদি আপনার কার্ড সনাক্ত না হয়, আপনি জোর করে এই কার্ডের জন্য সঠিক টিউনার এবং " "কার্ডের ধরণ এখানে জোর করে দিতে পারেন। যদি প্রয়োজন হয় তাহলে শুধু আপনার কার্ডের " "প্যারামিটার নির্বাচন করুন।" #: harddrake/v4l.pm:395 #, c-format msgid "Card model:" msgstr "কার্ড মডেল:" #: harddrake/v4l.pm:396 #, c-format msgid "Tuner type:" msgstr "টিউনারের ধরণ:" #: harddrake/v4l.pm:397 #, c-format msgid "Number of capture buffers:" msgstr "ক্যাপচার বাফারের সংখ্যা:" #: harddrake/v4l.pm:397 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "mmap'ed ক্যাপচারের জন্য ক্যাপচার বাফারের সংখ্যা" #: harddrake/v4l.pm:399 #, c-format msgid "PLL setting:" msgstr "PLL সেটিং:" #: harddrake/v4l.pm:400 #, c-format msgid "Radio support:" msgstr "রেডিও সাপোর্ট:" #: harddrake/v4l.pm:400 #, c-format msgid "enable radio support" msgstr "রেডিও সাপোর্ট সক্রিয় করো" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandriva Linux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "চালিয়ে যাওয়ার আগে, লাইসেন্সের শর্তগুলো আপনার সাবধানতার পড়া উচিত। এটা সম্পূর্ণ\n" "ম্যান্ড্রিব লিনাক্স ডিস্ট্রিবিউশন পূর্ণ করে। যদি আপনি এখানকার সব শর্তের সাথে একমত \n" "থাকেন, \"%s\" বাক্সটি চেক্‌ করুন। যদি না হয়, তাহলে \"%s\" বাটনে ক্লিক \n" "করলে আপনার কম্পিউটার রিবুট হবে।" #: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91 #: install_steps_interactive.pm:735 standalone/drakautoinst:214 #, c-format msgid "Accept" msgstr "গ্রহণ" # সাম: # \"shell\" = ? # bash #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux একটি বহু‌-ব্যবহারকারী সিস্টেম যেখানে প্রতিটি ব্যবহারকারী নিজস্ব পছন্দ ও\n" "ফাইলসমূহ আলাদাভাবে রক্ষণাবেক্ষণ করতে পারে। কিন্ত এসব সংযোজিত ব্যবহারকারীরা,\n" "\"root\"‌ (যে কিনা সিস্টেম অ্যাডমিনিস্ট্রেটর) এর মত, তাদের নিজস্ব ফাইল ও " "কনফিগারেশন\n" "ছাড়া অন্য কিছু বদলাতে অনুমোদিত নয়। এটি সিস্টেমকে অনিচ্ছাকৃত বা অস্বাভাবিক পরিবর্তন " "থেকে রক্ষা করে,\n" "যা কিনা সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে। আপনাকে নিজের জন্য অন্তত একটি সাধারণ " "ব্যবহারকারী\n" " তৈরী করতে হবে -- যে অ্যাকাউন্টটি আপনি নিয়মিত কাজের জন্য ব্যবহার করবেন। যদিও " "\"root\"\n" " হিসেবে লগ ইন করে সব কাজই করা সম্ভব, এটি বিপদজনকও বটে! একটি ছোটখাটো ভুলের " "কারণে\n" " আপনার সম্পূর্ণ সিস্টেম অচল হয়ে যেতে পারে। একজন সাধারণ ব্যবহারকারী খুব বড় ভুল " "করলেও হয়ত\n" " কিছু তথ্য হারাতে পারে তবে সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে না।\n" "\n" "প্রথম ক্ষেত্রটিতে একটি আসল নাম দিন। তবে এটি অত্যাবশ্যকীয় নয় -- আপনি অন্য কিছুও " "লিখতে\n" "পারেন। DrakX, এর প্রথম শব্দটি নিয়ে \"%s\" এ কপি করবে, যা দিয়ে কিনা এই " "ব্যবহারকারী\n" "সিস্টেমে লগ ইন করবে। প্রয়োজন হলে আপনি ডিফল্ট নামটি বদল করতে পারেন। এরপর আপনাকে\n" "একটি পাসওয়ার্ড দিতে হবে। নিরাপত্তার দৃষ্টিকোণ থেকে সাধারণ ব্যবহারকারীর পাসওয়ার্ড, " "\"root\" এর\n" "পাসওয়ার্ডের মত জরুরী নয় তবে এটিকে খালি রাখা বা সহজ পাসওয়ার্ড দেয়া উচিত নয়, কারণ " "এতে\n" "আপনার ফাইলসমূহ অরক্ষিত থেকে যায়।\n" "\n" "\"%s\" তে ক্লিক করার পর আপনি আরও ব্যবহারকারী তৈরী করতে পারেন। আপনার পরিবারের\n" "সদস্য ও বন্ধুদের জন্য আলাদা আলাদা একাউন্ট তৈরী করুন। শেষ হলে \"%s\" ক্লিক করুন।\n" "\n" "\"%s\" বাটনে ক্লিক করে আপনি একজন ব্যবহারকারীর ডিফল্ট \"শেল\" বদল করতে পারেন\n" "(ডিফল্ট মান bash)।\n" "\n" "সব ব্যবহারকারী তৈরীর পর আপনাকে একটি বেছে নিতে হবে যা কিনা কম্পিউটার বুট করার " "পর\n" "স্বয়ংক্রিয়ভাবে লগইন হবে। আপনি যদি এই ফিচারে আগ্রহী হন(এবং স্থানীয় নিরাপত্তা নিয়ে " "বিচলিত\n" "না হন), তবে পছন্দনুযায়ী ব্যবহারকারী ও উইন্ডো ম্যানেজার নির্বাচন করুন এবং \"%s\" " "টিতে ক্লিক\n" "করুন। অন্যথায় \"%s\" চেকবক্সটি আনচেক করুন।" #: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783 #, c-format msgid "User name" msgstr "ইউজারের নাম" # পরবর্তি #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233 #: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321 #: network/thirdparty.pm:323 printer/printerdrake.pm:3678 #: standalone/drakTermServ:383 standalone/drakbackup:3940 #: standalone/drakbackup:4034 standalone/drakbackup:4051 #: standalone/drakbackup:4069 ugtk2.pm:506 #, c-format msgid "Next" msgstr "পরবর্তী" #: help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?" # সাম: # secondary = সহকারী? #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "আপনার হার্ড ড্রাইভে বর্তমানে নিম্নলিখিত লিনাক্স পার্টিশনগুলো বিদ্যমান।\n" "আপনি উইজার্ড কর্তৃক বাছাইকৃত সেটিংসমূহ রাখতে পারেন কারণ বেশীরভাগ\n" "সাধারণ ইনস্টলেশনের ক্ষেত্রে এটিই যথেষ্ট। যদি পরিবর্তন করতে চান, আপনাকে অন্তত একটি\n" "রুট পার্টিশন তৈরী করতে হবে (\"/\")। পার্টিশনের সাইজ খুব ছোট না হওয়া জরুরী, কারন\n" "অন্যথা আপনি যথেষ্ট সফ্টওয়্যার ইনস্টল করতে পারবেন না। আপনার তথ্যসমূহ আলাদা\n" "পার্টিশনে রাখতে চাইলে, আপনাকে আরও একটি \"/home\" পার্টিশন তৈরী করতে হবে\n" "(যা কিনা একাধিক লিনাক্স পার্টিশন থাকলেই সম্ভব)।\n" "\n" "পার্টিশনগুলো তালিকায় এভাবে দেখানো হয়েছে: \"নাম\", \"ধারণক্ষমতা\".\n" "\n" "\"নাম\" এর কাঠামো হচ্ছে: \"হার্ড ড্রাইভের ধরন\", \"হার্ড ড্রাইভ নাম্বার\",\n" "\"পার্টিশন নাম্বার\" (যেমন, \"hda1\").\n" "\n" "যদি আপনার হার্ড ড্রাইভটি IDE হার্ড ড্রাইভ হলে \"হার্ড ড্রাইভের ধরন\" হবে \"hd\", " "আর\n" " SCSI হার্ড ড্রাইভ হলে হবে \"sd\"।\n" "\n" "\"হার্ড ড্রাইভ নাম্বার\", হচ্ছে \"hd\" বা \"sd\" এর পরের একটি অক্ষর। IDE হার্ড " "ড্রাইভের\n" "জন্য:\n" "\n" " * \"a\" অর্থ \"প্রাথমিক IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n" "\n" " * \"b\" অর্থ \"প্রাথমিক IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\";\n" "\n" " * \"c\" অর্থ \"সহকারী IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n" "\n" " * \"d\" অর্থ \"সহকারী IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\".\n" "\n" "SCSI হার্ড ড্রাইভের জন্য, \"a\" অর্থ \"সর্বনিম্ন SCSI ID\", \"b\" অর্থ\n" "\"দ্বিতীয় সর্বনিম্ন SCSI ID\", ইত্যাদি।" #: help.pm:85 #, c-format msgid "" "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "ম্যান্ড্রিব লিনাক্স ইনস্টলেশন কয়েকটি সিডি'তে ভাগ করা থাকে। যদি একটি চিহ্নিত " "প্যাকেজ\n" "অন্য সিডি'তে থেকে থাকে, তাহলে DrakX বর্তমান সিডি'টি বের করে দেয় এবং " "প্রয়োজনীয়টি\n" "প্রবেশ করাতে জিজ্ঞেস করে। যদি এরকম অনুরোধ না আসে, তাহলে \"%s\" তে ক্লিক করুন,\n" "যথাযথ প্যাকেজগুলো ইনস্টল হবে না।" # সাম: # documentation = ডকুমেন্টেশন #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandriva Linux, and to make " "it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandriva Linux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "এখন আপনাকে নির্বাচন করতে হবে আপনি কোন কোন প্রোগ্রাম সিস্টেমে ইনস্টল করতে চান।\n" "Mandriva Linux এর জন্য কয়েক হাজার প্যাকেজ রয়েছে, এবং ব্যাবস্থাপনার সুবিধার্থে " "সেগুলোকে\n" "অ্যাপ্লিকেশনের ধরন অনুযায়ী ভাগ করা হয়েছে।\n" "\n" "Mandriva Linux সব প্যাকেজগ্রুপসমূহ চারটি শ্রেণীতে ভাগ করে। আপনি বিভিন্ন শ্রেণীর\n" "অ্যাপ্লিকেশনমিলিয়ে ও মিশিয়ে ইনস্টল করতে পারেন, যেমন একটি ``Workstation''\n" "ইনস্টলেশনে আপনি ''Server'' শ্রেণী থেকে অ্যাপ্লিকেশন ইনস্টল\n" "করতে পারেন।\n" "\n" " * \"%s\": আপনি যদি আপনার মেশিনটি ওয়ার্কস্টেশন হিসেবে ব্যবহার করতে চান, " "Workstation''\n" "শ্রেণী থেকে এক বা একাধিক গ্রুপ নির্বাচন করুন।\n" "\n" " * \"%s\": আপনি যদি আপনার মেশিনটি প্রোগ্রামিংএর জন্য ব্যবহার করতে চান, সে " "অনুযায়ী\n" "গ্রুপ নির্বাচন করুন। \"LSB\" নামের বিশেষ গ্রুপটি আপনার সিস্টেমকে এমনভাবে\n" "কনফিগার করবে যাতে তা Linux Standard Base স্পেসিফিকেশনের সাথে যতদূর\n" "সম্ভব সামঞ্জস্য বজায় রাখে।\n" "\n" "\"LSB\" গ্রুপটি নির্বাচন করলে, ডিফল্ট \"2.6\" কার্নেল সিরিজের বদলে\n" "\"2.4\" সিরিজটি ইনস্টল হবে। এটি করা হয় সিস্টেমকে 100%%-LSB সামঞ্জস্যপূর্ণ\n" "করার জন্য। তবে, আপনি \"LSB\" গ্রুপটি নির্বাচন না করলেও আপনার সিস্টেম প্রায়\n" "100%%-LSB সামঞ্জস্যপূর্ণ হবে।\n" "\n" "* \"%s\": আপনার মেশিনটি যদি সার্ভার হিসেবে ব্যবহৃত হয়, আপনার মেশিনে কোন সাধারন\n" " সার্ভিসসমূহ ইনস্টল করতে চান তা নির্বাচন করুন।\n" "\n" " * \"%s\": এখানে আপনার পছন্দ অনুযায়ী গ্রাফিক্যাল প্রতিবেশ নির্বাচন\n" "করুন। আপনি যদি গ্রাফিক্যাল ইন্টারফেস ব্যবহার করতে চান, অন্তত একটি অবশ্যই\n" "নির্বাচন করতে হবে।\n" "\n" "কোন গ্রুপ নামের উপর মাউস কার্সার রাখলে ঐ গ্রুপ সম্পর্কে টীকা প্রদর্শিত হবে।\n" "\n" "আপনি \"%s\" বক্সটি চেক করতে পারেন, যা কিনা প্রয়োজনীয় যদি আপনি প্যাকেজগুলো\n" "সম্পর্কে পরিচিত হন বা কোন কোন প্যাকেজ ইনস্টল হবে তা সম্পূর্ণভাবে নিয়ন্ত্রন\n" "করতে চান।\n" "\n" "\"%s\" মোডে ইনস্টলেশন শুরু করলে, আপনি সব গ্রুপ ডিসিলেক্ট করে নতুন প্যাকেজ\n" "ইনস্টলেশন বাতিল করতে পারেন। এটি একটি বিদ্যমান সিস্টেম মেরামত ও আপডেট\n" "করার জন্য প্রযোজ্য।\n" "\n" "আপনি যদি একটি সাধারণ ইনস্টলেশনের ক্ষেত্রে (আপগ্রেড নয়), সব গ্রুপ\n" "ডিসিলেক্ট করে থাকেন, তবে একটি পপআপ ডায়ালগে সর্বনিম্ন ইনস্টলেশনের কিছু\n" "অপশন পরামর্শ করা হবে:\n" "\n" "* \"%s\": একটি সক্রিয় গ্রাফিক্যাল ডেস্কটপের জন্য প্রয়োজনীয় সর্বনিম্ন প্যাকেজ ইনস্টল " "কর।\n" "\n" "* \"%s\": মূল সিস্টেম, প্রাথমিক ইউটিলিটিসমূহ ও তাদের ডকুমেন্টেশন ইনস্টল করে। এই " "ইনস্টলেশনটি সার্ভার সেটআপ করার জন্য উপযুক্ত।\n" "\n" "* \"%s\": একটি সক্রিয় Linux সিস্টেমের জন্য জরুরী সর্বনিম্ন সংখ্যক প্যাকেজ ইনস্টল করে। " "এ\n" " ইনস্টলেশনে আপনি শুধু একটি কমান্ড লাইন ইন্টারফেস পাবেন। ইনস্টলেশনে মোট সাইজ প্রায় " "৬৫\n" " মেগাবাইট।" #: help.pm:146 share/compssUsers.pl:24 #, c-format msgid "Workstation" msgstr "ওয়ার্কষ্টেশন" #: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167 #: share/compssUsers.pl:169 #, c-format msgid "Development" msgstr "ডেভলপমেন্ট" #: help.pm:146 share/compssUsers.pl:145 #, c-format msgid "Graphical Environment" msgstr "গ্রাফিকাল পরিবেশ" #: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "আলাদাভাবে প্যাকেজ নির্বাচন" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "আপগ্রেড" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "X-এর সাথে" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "সাধারণ ডকুমেন্টেশন" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "এক্কেবারেই সল্প ইনস্টলেশন" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandriva Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandriva Linux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904 #: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503 #: standalone/draksec:54 standalone/harddrake2:308 standalone/net_applet:355 #: ugtk2.pm:907 wizards.pm:156 #, c-format msgid "No" msgstr "না" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157 #: modules/interactive.pm:71 printer/printerdrake.pm:743 #: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:307 #: standalone/net_applet:359 ugtk2.pm:907 wizards.pm:156 #, c-format msgid "Yes" msgstr "হ্যাঁ" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "সয়ংক্রিয় নির্ভরতা" # sam #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": \"%s\" বাটনে ক্লিক করলে প্রিন্টার কনফিগারেশন উইজার্ড খুলবে।\n" "প্রিন্টার কনফিগারেশন সম্বন্ধে আরো জানতে, \"স্টার্টার গাইড\" এর যথাযথ\n" "অধ্যায়ের পরামর্শ নিন। আমাদের সহায়িকাতে দেখানো ইন্টারফেসটি, ইনস্টলেশনে\n" "ব্যবহৃত ইন্টারফেসের অনুরুপ। " #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607 #: standalone/drakbackup:2327 standalone/drakbackup:2331 #: standalone/drakbackup:2335 standalone/drakbackup:2339 #, c-format msgid "Configure" msgstr "কনফিগার" # সাম #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "এই ডায়ালগটি আপনি বুট করার সময় কি কি সার্ভিস শুরু করতে চান তা নির্বাচন করার জন্য।\n" "\n" "DrakX বর্তমান ইনস্টলেশনে বিদ্যমান সব সার্ভিস দেখাবে। প্রতিটি সার্ভিস ভালভাবে দেখুন " "এবং\n" "বুটের সময় যেগুলো প্রয়োজন না হয়, সেগুলো আনচেক করুন।\n" "\n" "একটি সার্ভিস নির্বাচন করলে, সার্ভিসটি সম্পর্কে সংক্ষিপ্ত তথ্য প্রদর্শিত হবে। আপনি যদি " "কোন সার্ভিসের\n" "আবশ্যকতা সম্পর্কে নিশ্চিত না হন তবে ডিফল্ট মানে রেখে দেয়াই নিরাপদ।\n" "\n" "!! আপনি আপনার মেশিন সার্ভার হিসেবে ব্যবহার করতে চাইলে খুব সাবধান থাকবেন: আপনি " "অবশ্যই\n" "কোন অবাঞ্ছনীয় সার্ভিস চালু করতে চান না কারন কিছু সার্ভিস সার্ভারে সক্রিয় করাটা " "বিপদজনক।\n" "এক কথায়, শুধু সেসব সার্ভিসই চালু করুন যেসব আপনার প্রয়োজন। !!" #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" #: help.pm:217 install_steps_interactive.pm:879 #, c-format msgid "Hardware clock set to GMT" msgstr "হার্ডওয়্যারে ঘড়ি GMT-এ সেট করা" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "সয়ংক্রিয় সময় মেলানো" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "গ্রাফিক কার্ড\n" "\n" " সাধারণত ইনস্টলার আপনার মেশিনে ইনস্টলকৃত গ্রাফিক কার্ড স্বয়ংক্রিয়ভাবে সন্ধান করবে\n" "এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই কার্ড\n" "আপনি ইনস্টল করেছেন সেটা বেছে নিতে পারবেন।\n" "\n" " এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n" "acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n" "আপনাকে জিজ্ঞেস করা হবে।" #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "মনিটর\n" "\n" " সাধারণত ইনস্টলার আপনার মেশিনে সংযুক্ত মনিটর স্বয়ংক্রিয়ভাবে সন্ধান করবে\n" "এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই মনিটর\n" "আপনার কম্পিউটারে সংযুক্ত করেছেন সেটা বেছে নিতে পারবেন।" #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "রেজ্যুলুশন\n" "\n" " এখানে আপনার গ্রাফিক্‌স হার্ডওয়্যারের রেজ্যুলুশন এবং রংয়ের গভীরতা বেছে নিতে \n" "পারেন। আপনার প্রয়োজনের সাথে যেটি সবচেয়ে ভাল হয় তার যেকোন একটি বেছে নিন\n" "(ইনস্টলেশনের পর আপনি তা পরিবর্তন করতে সমর্থ হবেন)। বেছে নেয়া কন্‌ফিগারেশনের\n" "নমুনা মনিটরের ছবিতে দেখানো হচ্ছে।" #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n" "acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n" "আপনাকে জিজ্ঞেস করা হবে।" #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "অপশন\n" "\n" " এই ধাপগুলো বুট করার সময় স্বয়ংক্রিয়ভাবে আপনি যেখানে আপনার মেশিনের গ্রাফিকাল\n" "ইন্টারফেস বাছাই করার অনুমতি পাবেন। সুস্পষ্টভাবেই, যদি আপনার মেশিনকে একটি সার্ভার " "হিসেবে\n" "ব্যবহার করতে চান, তাহলে আপনি \"%s\" দিয়ে পরীক্ষা করে নিতে পারেন, অথবা যদি " "আপনি\n" "সফলভাবে ডিসপ্লে কন্‌ফিগার করতে না পারেন।" #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandriva Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandriva Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandriva Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandriva Linux system, " "choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "শুণ্য স্থান ব্যবহার করো" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "উপস্থিত পার্টিশন ব্যবহার করো" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "উইন্ডোজ পার্টিশনের খালি জায়গা ব্যবহার করে" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "সম্পূর্ণ ডিস্ক মুছে ফেলো" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "উইন্ডোজ সরাও" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "হাতে হাতে ডিস্ক পার্টিশন" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "সয়ংক্রিয়-ইনস্টল ফ্লপি তৈরী করো" #: help.pm:409 install_steps_interactive.pm:1330 #, c-format msgid "Replay" msgstr "জবাব" #: help.pm:409 install_steps_interactive.pm:1330 #, c-format msgid "Automated" msgstr "সয়ংক্রিয়ভাবে" #: help.pm:409 install_steps_interactive.pm:1333 #, c-format msgid "Save packages selection" msgstr "প্যাকেজের নির্বাচন সংরক্ষণ করে রাখো" # সাম #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandriva Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "আপনি যদি পুরানো GNU/Linux পার্টিশন আবার ব্যবহার করতে চান, আপনি হয়ত কোন পার্টিশন " "নতুন করে ফরম্যাট করে পুরানো তথ্য মুছে ফেলতে চাইবেন। এটি করতে হলে, ঐ পার্টিশনগুলোও " "নির্বাচন করুন।\n" "\n" "মনে রাখবেন, সব পার্টিশন ফরম্যাট করা জরুরী নয়। যে পার্টিশনে অপারেটিং সিস্টেম থাকবে " "(যেমন \"/\", \"/usr\" বা \"/var\") সেটি অবশ্যই ফরম্যাট করতে হবে কিন্তু যেসব " "পার্টিশনের তথ্য আপনি সংরক্ষন করতে চান (সাধারনত \"/home\") সেগুলো ফরম্যাট করা " "অত্যাবশ্যকীয় নয়।\n" "\n" "পার্টিশন নির্বাচন করতে সাবধানতা অবলম্বন করবেন। ফরম্যাট করলে নির্বাচিত পার্টিশনের " "সব তথ্য মুছে যাবে এবং তা আর ফিরে পাওয়া যাবে না।\n" "\n" "পার্টিশন ফরম্যাট শুরু করতে \"%s\" চাপুন।\n" "\n" "আপনার নতুন Mandriva Linux অপারেটিং সিস্টেম ইনস্টেশনের জন্য আপনি যদি অন্য একটি " "পার্টিশন নির্বাচন করতে, তবে \"%s\" ক্লিক করুন।\n" "\n" "যদি আপনি পার্টিশনের জন্য ডিস্কের খারাপ ব্লক সনাক্ত করাতে চান তাহলে \"%s\" ক্লিক " "করুন।" # আগে #: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433 #: interactive/newt.pm:318 printer/printerdrake.pm:3676 #: standalone/drakTermServ:362 standalone/drakbackup:3900 #: standalone/drakbackup:3939 standalone/drakbackup:4050 #: standalone/drakbackup:4065 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "পূর্ববর্তী" # সাম #: help.pm:434 #, c-format msgid "" "By the time you install Mandriva Linux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "আপনি যখন Mandriva Linux ইনস্টল করবেন, সম্ভবত প্রথম রিলিজ থেকে কিছু\n" "প্যাকেজ আপডেট হয়ে গেছে। কোন সাধারন বা নিরাপত্তা ত্রুটি সমাধান করা হয়েছে।\n" "আপনাকে এই সুবিধাগুলি দেয়ার লক্ষ্যে এই আপডেটগুলো ইন্টারনেট থেকে ডাউনলোড\n" "করার সুযোগ দেয়া হয়েছে। যদি আপনার সক্রিয় ইন্টারনেট সংযোগ থাকে, \"%s\" চেক\n" "করুন, আর \"%s\" চেক করুন যদি আপাতত ইনস্টল করতে না চান।\n" "\n" "\"%s\" বাছাই করলে আপাকে কিছু ওয়েব লোকেশনের তালিকা দেয়া হবে যেখান থেকে\n" "আপডেট পাওয়া যাবে। আপনি আপনার কাছের একটি লোকেশন পছন্দ করুন। এরপর\n" "একটি প্যাকেজ নির্বাচন করার জন্য একটি ট্রী দেখানো হবে। প্যাকেজগুলো দেখুন এবং\n" "ডাউনলোড করে ইনস্টল করতে \"%s\" বাটন চাপুন। অথবা \"%s\" ক্লিক করে বের হয়ে আসুন।" # ইনস্টল #: help.pm:444 help.pm:588 install_steps_gtk.pm:387 #: install_steps_interactive.pm:155 standalone/drakbackup:4097 #, c-format msgid "Install" msgstr "ইনস্টল" # সাম # নিরাপত্তা স্তর #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandriva Linux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "এই সময়ে DrakX আপনার মেশিনের জন্য আপনার ইচ্ছানুযায়ী নিরাপত্তা স্তর\n" "বেছে নেয়ার সুযোগ দেবে। সাধারন নিয়ম অনুযায়ী, যদি একটি মেশিনে জরুরী\n" "তথ্য থাকে বা মেশিনটি ইন্টারনেটে সংযুক্ত থাকে তবে নিরাপত্তা বাড়িয়ে দেয়া\n" "হয়। নিরাপত্তা যত বেশী, ব্যবহারের স্বাচ্ছন্দ্য তত কমে যায়।\n" "\n" "আপনি যদি নিশ্চিত না হন কোন অপশনটি রাখবেন তবে ডিফল্ট অপশনটিই রাখুন।\n" "পরবর্তীতে আপনি এটি draksec টুল (যেটি Mandriva Linux নিয়ন্ত্রন কেন্দ্রের একটি অংশ)\n" "দিয়ে পরিবর্তন করতে পারবেন।\n" "\n" "\"%s\" ক্ষেত্রটিতে যিনি নিরাপত্তার দায়িত্বে নিয়োজিত তার ই-মেইল অ্যাড্রেস দিন।\n" "নিরাপত্তা বিষয়ক বার্তাগুলো এই অ্যাড্রেসে পাঠানো হবে। " #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "সিকিউরিটি এ্যডমিনিস্ট্রেটর" # সাম #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandriva Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "এই সময়ে আপনাকে Mandriva Linux যে পার্টিশনে ইনস্টল হবে তা নির্বাচন\n" "করতে হবে। যদি আগে থেকেই পার্টিশন তৈরী থাকে, (GNU/Linux এর পুর্বের\n" "কোন ইনস্টলেশনের কারনে বা অন্য কোন পার্টিশন টুল দিয়ে তৈরী করা) আপনি\n" "সেগুলো ব্যবহার করতে পারেন। অন্যথায় হার্ডড্রাইভ পার্টিশন তৈরী করতে হবে।\n" "\n" "পার্টিশন তৈরী করতে প্রথমে একটি হার্ডড্রাইভ নির্বাচন করুন। প্রথম পার্টিশন\n" "নির্বাচনের জন্য \"hda\", দ্বিতীয় পার্টিশনের জন্য \"hdb\", প্রথম SCSI ড্রাইভের\n" "জন্য \"sda\" ইত্যাদি ক্লিক করুন।\n" "\n" "নির্বাচিত ড্রাইভটি পার্টিশন করতে নিম্নলিখিত অপশনসমূহ ব্যবহার করুন:\n" "\n" " * \"%s\": এই অপশনটি নির্বাচিত ড্রাইভের সব পার্টিশন মুছে দিবে\n" "\n" " * \"%s\": এই অপশনটি আপনার হার্ডড্রাইভের খালি অংশে স্বয়ংক্রিয়ভাবে ext3 এবং\n" "swap পার্টিশন তৈরী করতে দিবে।\n" "\n" "\"%s\": আরও ফিচার ব্যবহার করার সুযোগ দেয়:\n" "\n" " * \"%s\": পার্টিশন টেবিলটি ফ্লপিতে সংরক্ষন করে যা কিনা পরবর্তীতে পার্টিশন\n" "টেবিল উদ্ধার করতে কাজে লাগে। এটি খুবই গুরুত্বপুর্ণ একটি ধাপ যেটি আপনার\n" "করা উচিত।\n" "\n" " * \"%s\": ফ্লপি ডিস্কে সংরক্ষিত পার্টিশন টেবিল এনে তা পুর্বাবস্থায় ফিরিয়ে নেয়।\n" "\n" " * \"%s\": আপনার পার্টিশন টেবিল নষ্ট হলে আপনি এই অপশনটি দিয়ে তা মেরামত\n" "করার চেষ্টা করতে পারেন। অনুগ্রহ করে সাবধানতা অবলম্বন করবেন এবং মনে রাখবেন\n" "এই প্রক্রিয়া সবসময় সফল নাও হতে পারে।\n" "\n" " * \"%s\": সব পরিবর্তন বাতিল করে দিয়ে হার্ডড্রাইভের পুর্বের মূল পার্টিশন টেবিল লোড " "করে।\n" "\n" " * \"%s\": এই অপশনটি অনির্বাচিত করলে, ব্যবহারকারীদের রিমুভেবল মাধ্যম যেমন\n" "ফ্লপি এবং CD-ROM নিজে নিজে মাউন্ট/আনমাউন্ট করার প্রায়োজন পরবে।\n" "\n" " * \"%s\": এই অপশনটি ব্যবহার করুন যদি হার্ডড্রাইভ পার্টিশন আপনি উইজার্ডের\n" "মাধ্যমে করতে চান। পার্টিশন সম্বন্ধে ভাল ধারনা না থাকলে এই অপশনটি পরামর্শনীয়।\n" "\n" " * \"%s\": এই অপশনটি ব্যবহার করে পরিবর্তনগুলো বাতিল করুন।\n" "\n" " * \"%s\": আপনার পার্টিশনে আরও কিছু কাজ (ধরন, অপশন ফরম্যাট) করার অপশন\n" "দেয় ও হার্ডড্রাইভ সম্পর্কে আরও তথ্য দেয়।\n" "\n" " * \"%s\": পার্টিশন করা শেষ হলে এই অপশন আপনার সেটিংগুলো ডিস্কে সংরক্ষণ করবে।\n" "\n" "পার্টিশনের সাইজ ঠিক করতে আপনি কীবোর্ডের তীর চিহ্নিত কীগুলো ব্যবহার করতে পারেন।\n" "\n" "দ্রষ্টব্য: আপনি যেকোন অপশন কীবোর্ড দিয়ে নির্বাচন করতে পারেন। পার্টিশন নির্বাচন\n" "করতে [Tab] এবং [Up/Down] তীর চিহ্নগুলো ব্যবহার করুন।\n" "\n" "যখন একটি পার্টিশন নির্বাচন অবস্থায় আছে, আপনি নিম্নলিখিত কীগুলো ব্যবহার করতে " "পারেন:\n" "\n" " * Ctrl-c নতুন পার্টিশন তৈরী করার জন্য (যখন একটি খালি পার্টিশন নির্বাচন করা " "হয়েছে)\n" "\n" " * Ctrl-d একটি পার্টিশন মুছে দিতে\n" "\n" " * Ctrl-m মাউন্ট পয়েন্ট সেট করতে\n" "\n" "বিদ্যমান ফাইল সিস্টেমের ধরন সম্পর্কে জানতে হলে \"Reference Manual\" এর\n" "ext2FS অধ্যায়টি পড়ুন।\n" "\n" "আপনি যদি PPC মেশিনে ইনস্টল করেন, তাহলে আপনাকে yaboot বুটলোডারের\n" "ব্যবহারের জন্য একটি ছোট অন্তত ১ এমবি এর HFS \"বুটস্ট্র্যাপ\" পার্টিশন তৈরী করতে " "হবে।\n" "আপনি যদি পার্টিশনটি আরও বড় করতে চান, যেমন ৫০ MB, আপনি কোন জরুরী বুট সমস্যার\n" "জন্য একটি আলাদা কার্নেল এবং ramdisk তৈরী করে এই পার্টিশনে রাখতে পারেন।" #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "রিমুভযোগ্য মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "সাধারণ/দক্ষ মোডের মধ্যে পরিবর্তন" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandriva Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" "\"%s\": বর্তমান দেশ নির্বাচন পরীক্ষা করুন। আপনি যদি এই দেশের জন্য না হন,\n" "তাহলে \"%s\" বাটনে ক্লিক করুন এবং অন্য একটি বেছে নিন। যদি আপনার দেশ\n" "উল্লেখিত তালিকায় না থাকে, তাহলে \"%s\" বাটনে ক্লিক করে সম্পূর্ণ দেশের তালিকায় " "পেয়ে যান।" #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandriva Linux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandriva Linux system. Your current " "partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandriva Linux version \"8.1\" is not recommended." msgstr "" # সাম # ইনস্টলেশন #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "আপনার ভাষা নির্বাচনের উপর ভিত্তি করে, DrakX স্বয়ংক্রিয়ভাবে একটি কীবোর্ড\n" "কনফিগারেশন বেছে নেবে। এই নির্চনটি বাঞ্ছনীয় কিনা দেখে নিন বা অন্য একটি\n" "লেআউট পছন্দ করুন।\n" "\n" "আপনার ভাষার সাথে সম্পূর্ন মিলিয়ে কীবোর্ড আপনি নাও পেতে পারেন:\n" "যেমন যদি আপনি ইংরেজী ভাষাভাষী একজন সুইস নাগরিক হন, আপনি সুইস কীবোর্ড\n" "ব্যবহার করতে পারেন। কিন্তু আপনি যদি ইংরেজী ভাষী হয়ে Quebec এ বসবাস\n" "করেন আপনার পরিস্থিতি এমন হতে পারে যেখানে country-set কীবোর্ড এবং\n" "নিজস্ব ভাষা একই নয়। যেকোন ক্ষেত্রেই আপনি আপনি একটি তালিকা থেকে সঠিক\n" "কীবোর্ডটি বেছে নিতে পারেন।\n" "\n" "সমর্থিত কীবোর্ডের তালিকা দেখতে \"%s\" বাটনে ক্লিক করুন।\n" "\n" "যদি আপনি নন‌-ল্যাটিন বর্ণমালার কীবোর্ডে লেআউট বাছাই করেন, পরবর্তী ডায়ালগটি\n" "আপনাকে ল্যাটিন ও নন‌-ল্যাটিন কীবোর্ডের মধ্যে সুইচ করার জন্য একটি কী বাইন্ডিং\n" "বাছাই করতে হবে।" #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandriva Linux's use of UTF-8 " "will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" #: help.pm:647 #, c-format msgid "Espanol" msgstr "স্পেনীয়" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "চাকার বৈশিষ্ঠ অনুহকরণ" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "Universal | যে কোন PS/2 এবং ইউএসবি মাউস" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "সঠিক পোর্টটি নির্বাচন করুন। যেমন, উইন্ডোজের \"COM1\" পোর্টটি GNU/Linux-এ\n" "\"ttyS0\" নামে পরিচিত।" #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: help.pm:722 #, c-format msgid "authentication" msgstr "অনুমোদন" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" # সাম # emulate = এমুলেট? #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandriva Linux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandriva Linux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "এখন সময় আপনার কম্পিউটারের জন্য একটি প্রিন্টিং সিস্টেম নির্বাচন করার। অনান্য\n" "অপারেটিং সিস্টেম আপনাকে একটি অপশন দিতে পারে কিন্তু Mandriva Linux দেবে দুটি।\n" "প্রিন্টিং সিস্টেমগুলো বিভিন্ন কনফিগারেশনের জন্য প্রযোজ্য।\n" "\n" " * \"%s\" -- অর্থ হচ্ছে \"প্রিন্ট করো, সারিতে রাখবেনা\". এটি নির্বাচন করুন যদি " "আপনার কোন\n" "প্রিন্টারের সাথে সরাসরি সংযোগ থাকে, আপনি প্রিন্টার জ্যাম থেকে জরুরীভাবে বের হয়ে " "যেতে\n" "চান এবং যদি আপনার নেটওয়ার্ক প্রিন্টার না থাকে।(\"%s\" শুধুমাত্র খুবই সাধারন " "নেটওয়ার্ক\n" "সামলাতে পারে এবং কিছুটা ধীর হয়)। এটি আপনার GNU/Linux এর প্রথম অভিজ্ঞতা হলে\n" "আপনার \"pdq\" ব্যবহার করাটাই শ্রেয়।\n" "\n" " * \"%s\" অর্থ \"সাধারন Unix প্রিন্টিং সিস্টেম\" এবং এটি আপনার স্থানীয় প্রিন্টার " "হোক\n" "বা পৃথিবীর অন্য প্রান্তে অবস্থিত কোন প্রিন্টারই হোক যেকোন ক্ষেত্রেই একটি উত্‍কৃষ্ট " "সিস্টেম।\n" "এটি কনফিগার করতে সহজ এবং পুরোনো \"lpd\" প্রিন্টিং সিস্টেমের জন্য সার্ভার বা " "ক্লায়েন্ট\n" "হিসেবে কাজ করতে পারে। অতএব এটি পুরানো অপারেটিং সিস্টেম যেগুলোর সার্ভিস প্রয়োজন\n" "তাদের সাথেও সামঞ্জস্যপূর্ণ। যদিও খুব শক্তিশালী, মূল সেটআপটি প্রায় \"pdq\" এর মত " "সহজ।\n" "আপনি যদি \"lpd\" সার্ভার এমুলেট করতে চান, তবে \"cups-lpd\" daemon টি চালু করতে\n" "ভুলবেন না। \"%s\" এর প্রিন্টার অপশন বাছাই করা ও প্রিন্টার ব্যবস্থাপনার জন্য একটি " "গ্রাফিক্যাল\n" "ইন্টারফেস রয়েছে।\n" "\n" "আপনার বাছাইকৃত প্রিন্টিং সিস্টেমটি যদি আপনার পরে পছন্দ না হয়,\n" "তবে আপনি Mandriva Linux নিয়ন্ত্রন কেন্দ্র থেকে PrinterDrake চালিয়ে ও \"%s\" বাটন " "ক্লিক\n" "করে তা বদল করতে পারেন।" #: help.pm:765 #, c-format msgid "pdq" msgstr "pdq" #: help.pm:765 printer/cups.pm:115 printer/data.pm:122 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "দক্ষ" # সাম # check উচিত spelling, zwj didn't work for me... #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX প্রথমে আপনার কম্পিউটারে বিদ্যমান IDE ডিভাইস সনাক্ত করবে। এটি আপনার\n" "সিস্টেমে এক বা একাধিক PCI SCSI কার্ডের জন্যেও স্ক্যান করবে। যদি SCSI কার্ড পাওয়া\n" "যায়, DrakX নিজে নিজেই সঠিক ড্রাইভারটি ইনস্টল করবে।\n" "\n" "যেহেতু হার্ডওয়্যার সনাক্তকরন কোন অব্যার্থ পক্রিয়া নয়, DrakX আপনার হার্ডড্রাইভ সনাক্ত\n" "নাও করতে পারে। এ ক্ষেত্রে আপনাকে হার্ডওয়্যারটি নিজ হাতে নির্দিষ্ট করে দিতে হবে।\n" "\n" "PCI SCSI adapter নিজ হাতে নির্দিষ্ট করে দিতে হলে, DrakX আপনাকে জিজ্ঞাসা করবে\n" "আপনি অপশন কনফিগার করতে চান কিনা। আপনার DrakX কে হার্ডওয়্যারটির নির্দিষ্ট কার্ডের\n" "অপশনের জন্য প্রোব করতে দেয়া উচিত্‍ যা কিনা adapter ইনিশিয়ালাইজ করতে প্রয়োজন।\n" "বেশীরভাগ ক্ষেত্রে DrakX এই কাজটি কোন ঝামেলা ছাড়াই সম্পন্ন করবে।\n" "\n" "DrakX যদি প্রোব করে হার্ডওয়্যারে পাঠানোর জন্য প্যারামিটারগুলো নির্ধারন করতে না " "পারে\n" "তাহলে আপনাকে তা নিজে হাতে কনফিগারেশন করতে হবে।\n" " " #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": যদি আপনার সিস্টেমে একটি সাউন্ড কার্ড পাওযা যায়, সেটা এখানে দেখানো হবে।\n" "যদি আপনি জানান যে আসলে এই সাউন্ড কার্ডটি আপনার সিস্টেমে উপস্থিত নেই, তাহলে আপনি\n" "বাটনে ক্লিক করুন এবং অন্য একটি ড্রাইভার বেছে নিন।" #: help.pm:788 help.pm:855 install_steps_interactive.pm:1011 #: install_steps_interactive.pm:1028 #, c-format msgid "Sound card" msgstr "সাউন্ডকার্ড" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandriva Linux Control Center after the installation has finished to " "benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandriva Linux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:855 install_steps_interactive.pm:970 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "টাইমজোন" #: help.pm:855 install_steps_interactive.pm:1044 #, c-format msgid "TV card" msgstr "টিভি কার্ড" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "ISDN কার্ড" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "গ্রাফিকাল ইন্টারফেস" #: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1062 #: standalone/drakbackup:2021 #, c-format msgid "Network" msgstr "নেটওয়ার্ক" #: help.pm:855 install_steps_interactive.pm:1074 #, c-format msgid "Proxies" msgstr "প্রক্সিসমূহ" #: help.pm:855 install_steps_interactive.pm:1085 #, c-format msgid "Security Level" msgstr "সিকউরিটি লেভেল" #: help.pm:855 install_steps_interactive.pm:1099 #, c-format msgid "Firewall" msgstr "ফায়ারওয়াল" #: help.pm:855 install_steps_interactive.pm:1115 #, c-format msgid "Bootloader" msgstr "বুটলোডার" #: help.pm:855 install_steps_interactive.pm:1128 services.pm:193 #, c-format msgid "Services" msgstr "সার্ভিস সমূহ" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandriva Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "হার্ড ড্রাইভ বেছে নিন যেটি আপনি আপনার নতুন ম্যান্ড্রিব লিনাক্স পার্টিশন ইনস্টল করার " "জন্য\n" "মুছে ফেলতে চান। সাবধান, এই ড্রাইভে থাকা সকল ডাটা হারিয়ে যাবে এবং আর কখনই\n" "পাওয়া যাবে না!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "যদি এই হার্ড ড্রাইভে থাকা সব ডাটা এবং পার্টিশন মুছে ফেলতে চান তাহলে আপনি\n" "\"%s\"তে ক্লিক করুন। সাবধান, \"%s\"তে ক্লিক করার পর, উইন্ডোজ ডাটাসহ,\n" "আপনি এই হার্ড ড্রাইভে থাকা কোন ডাটা এবং পার্টিশন ফিরে\n" "পাবেন না।\n" "\n" "এই অপারেশনের মাধ্যমে হার্ড ড্রাইভের উপস্থিত ডাটা এবং পার্টিশন হারাতে না চাইলে \"%s" "\"তে ক্লিক করুন।" #: help.pm:869 #, c-format msgid "Next ->" msgstr "পরবর্তী ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- পূর্ববর্তী" #: install2.pm:115 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "আপনার কার্ণেলের কার্ণেল মডিউলগুলোতে প্রবেশ করতে পারছে না (%s ফাইলটি হারিয়া " "গেছে), এর স্বাভাবিক অর্থ হচ্ছে আপনার বুট ফ্লপি ইনস্টলেশন মিডিয়ামের সাথে sync এ নেই " "(অনুগ্রহ করে একটি নতুন বুট ফ্লপি তৈরী করুন)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "আপনাকে অবশ্যই %s-ও ফরমেট করতে হবে" #: install_any.pm:405 #, c-format msgid "Do you have further supplementary media?" msgstr "আপনার কি আরও একটি মাধ্যম আছে?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:408 #, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "নিম্নলিখিত মিডিয়া পাওয়া যাবে এবং ব্যবহৃত হবে : %s ইনস্টল করার সময়।\n" "\n" "\n" "আপনার কি কন্‌ফিগার করার জন্য কোন সংযোজিত ইনস্টলেশন মিডিয়া আছে?" #: install_any.pm:421 printer/printerdrake.pm:3022 #: printer/printerdrake.pm:3029 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "সিডি-রম" #: install_any.pm:421 #, c-format msgid "Network (HTTP)" msgstr "নেটওয়ার্ক (HTTP)" #: install_any.pm:421 #, c-format msgid "Network (FTP)" msgstr "নেটওয়ার্ক (FTP)" #: install_any.pm:421 #, c-format msgid "Network (NFS)" msgstr "" #: install_any.pm:451 #, c-format msgid "Insert the CD 1 again" msgstr "১ নং সিডিটি আবার প্রবেশ করান" #: install_any.pm:477 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "কোন ডিভাইস পাওয়া যায় নি" #: install_any.pm:482 #, c-format msgid "Insert the CD" msgstr "সিডিটি প্রবেশ করান" # সাম #: install_any.pm:487 #, c-format msgid "Unable to mount CD-ROM" msgstr "CD-ROM মাউন্ট প্রক্রিয়া ব্যর্থ হয়েছে" #: install_any.pm:520 install_any.pm:539 #, c-format msgid "URL of the mirror?" msgstr "mirror এর ইউ-আর-এল?" #: install_any.pm:525 #, c-format msgid "NFS setup" msgstr "" #: install_any.pm:525 #, c-format msgid "Please enter the hostname and directory of your NFS media" msgstr "" #: install_any.pm:526 #, c-format msgid "Hostname of the NFS mount ?" msgstr "" #: install_any.pm:526 #, c-format msgid "Directory" msgstr "" #: install_any.pm:575 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "এই mirror এ কোন hdlist ফাইল পাওয়া যাচ্ছে না" #: install_any.pm:740 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "আপনার সিডিরম পরিবর্তন করুন!\n" "অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে " "ঠিক আছে চাপুন।" #: install_any.pm:753 #, c-format msgid "Copying in progress" msgstr "কপি সম্পন্ন হচ্ছে" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:895 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "আপনি নিম্মলিখিত সার্ভার(গুলো) বেছে নিয়েছেন: %s\n" "\n" "\n" "এই সার্ভারগুলো ডিফল্টভাবেই চালু করা থাকে। তাদের কোন নিরাপত্তা সমস্যা\n" "নেই, কিন্তু নতুন কিছুর ক্ষেত্রে তার প্রয়োজন আছে। সেক্ষেত্রে আপনি অবশ্যই সেগুলোকে\n" "যত তাড়াতাড়ি সম্ভব আপগ্রেড করার ক্ষেত্রে নিশ্চিত হোন।\n" "\n" "\n" "আপনি কি আসলেই এই সার্ভারগুলো ইনস্টল করতে চান?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:918 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "আপনার সিস্টেম আপগ্রেড করার ক্ষেত্রে নিম্নলিখিত প্যাকেজগুলো মুছে যাবে: %s\n" "\n" "\n" "আপনি কি আসলেই এই প্যাকেজগুলো মুছে ফেলতে চান?\n" #: install_any.pm:1354 partition_table.pm:597 #, c-format msgid "Error reading file %s" msgstr "%s ফাইল পড়াতে ত্রুটি" # সাম #: install_any.pm:1585 #, c-format msgid "The following disk(s) were renamed:" msgstr "নিম্নলিখিত ডিস্কগুলো নামান্তর করা হয়েছে:" # সাম #: install_any.pm:1587 #, c-format msgid "%s (previously named as %s)" msgstr "%s (পূর্বের নাম %s)" #: install_any.pm:1625 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "একটি ভুল হয়ে গেছে - কোন সঠিক যন্ত্র পাওয়া যায়নি যেখানে নতুন ফাইল সিস্টেম তৈরি করা " "হবে। অনুগ্রহ করে এই সমস্যার কারণের জন্য আপনার হার্ডওয়্যার পরীক্ষা করুন" #: install_any.pm:1669 #, c-format msgid "HTTP" msgstr "এইচ-টি-টি-পি" #: install_any.pm:1669 #, c-format msgid "FTP" msgstr "এফ-টি-পি" # সাম #: install_any.pm:1669 #, c-format msgid "NFS" msgstr "NFS" # সাম #: install_any.pm:1692 #, c-format msgid "Please choose a media" msgstr "অনুগ্রহ করে একটি মিডিয়া নির্বাচন করুন" #: install_any.pm:1708 #, c-format msgid "File already exists. Overwrite it?" msgstr "এই ফাইলটি আগে থেকেই আছে। করব?" #: install_any.pm:1712 #, c-format msgid "Permission denied" msgstr "অনুমতি প্রদান করা হয়নি" #: install_any.pm:1761 #, c-format msgid "Bad NFS name" msgstr "" # সাম #: install_any.pm:1782 #, c-format msgid "Bad media %s" msgstr "অগ্রহণযোগ্য মিডিয়া %s" #: install_any.pm:1829 #, c-format msgid "Can not make screenshots before partitioning" msgstr "পার্টিশন করার আগে স্ক্রিনশট তৈরী করা যায়নি" #: install_any.pm:1836 #, c-format msgid "Screenshots will be available after install in %s" msgstr "%s -এ ইনস্টল করার পরে স্ক্রিনশট পাওয়া যাবে" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "সিস্টেম ইনস্টলেশন" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "সিস্টেম কনফিগারেশন" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "আপনার কম্পিউটারের কিছু হার্ডওয়্যার কাজ করার জন্য ``মালিকানার'' ড্রাইভার প্রয়োজন।\n" "আপনি তাদের সম্পর্কে এখান থেকে তথ্য নিতে পারবেন: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "আপনার অবশ্যই একটি root পার্টিশন থাকতে হবে।\n" "সেকারণে, একটি পার্টিশন তৈরি করুন (অথবা ইতিমধ্যেই তৈরি একটিতে ক্লিক করুন)।\n" "তারপর ``Mount point'' বেছে নিন এবং সেটাকে `/' তে সেট করুন" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "আপনার কোন swap পার্টিশন নেই\n" "\n" "তবুও আগাবো?" #: install_interactive.pm:70 install_steps.pm:218 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "আপনার /boot/efi -এ অবশ্যই একটি FAT পার্টিশন থাকতে হবে" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "নতুন পার্টিশন তৈরী করার জন্য যথেষ্ট পরিমান খালি জায়গা নেই" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "আগের পার্টিশনগুলি ব্যবহার করো" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "ব্যবহারের জন্য এখানে উপস্থিত কোন পার্টিশন নেই" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "লুপ ব্যাকের জন্য উইন্ডোজের পার্টিশন ব্যবহার করো" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Linux4Win-এর জন্য আপনি কোন পার্টিশন ব্যবহার করতে চান?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "সাইজ পছন্দ করো" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "মেগাবাইটে রুট পার্টিশনের সাইজ:" #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "মেগাবাইটে সোয়াপ পার্টিশনের সাইজ:" #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "লুপব্যাকে ব্যবহারের জন্য কেন FAT পার্টিশন নেই (অথবা পর্যাপ্ত জায়গা নেই)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "আপনি কোন পার্টিশন রি-সাইজ করতে চান?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "FAT আকার পরিবর্তক আপনার পার্টিশন হস্তক্ষেপ করতে পারেনি, \n" "নিম্নের এই সমস্যাগুলো হয়েছে: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "আপনার উইন্ডোজের পার্টিশনের সাইজ হিসেব করা হচ্ছে" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandriva Linux " "installation." msgstr "" "আপনার উইন্ডোজের পার্টিশনটি প্রচন্ড অসম। অনুগ্রহ করে আপনার কম্পিউটারটি উইন্ডোজে রি-বুট " "করে, ``defrag'' ইউটিলিটি চালান, পরে রি-ষ্টার্ট করে আবার মেনড্রক ইনস্টলেশন চালান।" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "সতর্ক বানী!\n" "\n" "DrakX এখন আপনার উইন্ডোজের পার্টিশন আকার পরিবর্তন করবে। খুবই সাবধান: এই\n" "কার্যক্রমটি বিপদজ্জনক। আপনি যদি এরকম আগে করে না থাকেন, তাহলে আপনাকে\n" "ইনস্টলেশন থেকে বের হয়ে, উইন্ডোজের কমান্ডপ্রমপ্ট থেকে \"chkdsk c:\" চালাতে হবে\n" "(লক্ষ্য রাখবেন, \"scandisk\"-এর মত গ্রাফিক্যাল প্রোগ্রামগুলি যথেষ্ট নয়, আপনাকে\n" "অবশ্যই কমান্ডপ্রমপ্ট থেকে \"chkdsk\" চালাতে হবে), ঐচ্ছিকভাবে defrag চালাতে\n" "পরেন, পরে ইনস্টলেশন পুনরায় শুরু করবেন। আপনকে আপনার ডাটা ব্যাকআপ করা\n" "উচিত্‍‌। নিশ্চিত্‍‌ হলে ঠিক আছে চাপুন।" #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "আপনি কোথায় উইন্ডোজের জন্য কোন সাইজটি রাখতে চান" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "পার্টিশনসমূহ %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "উইন্ডোজ পার্টিশন আকার পরিবর্তন করা হচ্ছে" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT আকার পরিবর্তন ব্যর্থ হয়েছে: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "রি-সাইজ করার জন্য কোন FAT পার্টিশন নেই (অথবা যথেষ্ট পারিমান ফাঁকা জায়গা নেই)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "উইন্ডোজ(TM) মুছে ফেলো" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "আপনার একের অধিক হার্ড ড্রাইভ আছে, আপনি কোনটাতে লিনাক্স ইনস্টল করতে চান?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "%s ড্রাইভে উপস্থিত সমস্থ ডাটা এবং পার্টিশন নষ্ট হয়ে যাবে" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "fdisk ব্যবহার করো" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "এখন আপনি %s-কে পার্টিশন করতে পারেন।\n" "যখন হয়ে যাবে, তখন `w' চেপে সেভ করতে ভূলবেননা" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "আমি ইনস্টল করার জন্য কোন জায়গা পাচ্ছিনা" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX পার্টিশন সহায়ক এই সমস্থ সমাধান পেয়েছে:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "পার্টিশনে ব্যার্থ: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "নেটওয়ার্ককে চালু করা হচ্ছে" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "নেটওয়ার্ককে বন্ধ করা হচ্ছে" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "সাবধান: বিনামূল্যের সফ্‌টওয়্যার পেটেন্‌ট মুক্ত হওয়ার প্রয়োজন নেই, এবং কিছু বিনামূল্যের\n" "সফ্‌টওয়্যার আপনার দেশ কর্তৃক পেটেন্‌টকৃত হতে পারে। উদাহরণস্বরুপ, অতিরিক্ত ব্যবহারের\n" "জন্য MP3 decoder একটি লাইসেন্স যুক্ত থাকে (বিস্তারিত জানার জন্য দেখুন\n" "http://www.mp3licensing.com । আপনি যদি অনিশ্চিত হোন যদি এর যেকোন\n" "একটি আপনার জন্যও প্রযোজ্য হতে পারে, আপনার স্থানীয় আইন পরীক্ষা করুন।" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "অভিনন্দন, ইনস্টলেশন পুরোপুরিভাবে হয়ে গেছে।\n" "দ্নবুট মিডিয়া সরিয়ে ফেলুন, এবং পুনরায় চালু করার জন্য return চাপুন।\n" "\n" "\n" "এই সংস্করণের ম্যান্ড্রিব লিনাক্সের তথ্য এখানে পাওয়া যাচ্ছে,\n" "কোন প্রকার সমস্যার সমাধান এখানে পাওয়া যাচ্ছে:\n" "\n" "\n" "%s\n" "\n" "\n" "আপনার সিস্টেম কন্‌ফিগার করার তথ্য অফিসিয়াল ম্যান্ড্রিব লিনাক্স ব্যবহারকারীর গাইডের\n" "ইনস্টল হবার পরের অধ্যায়ে পাওয়া যাবে।" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrivalinux.com/en/errata.php3" msgstr "http://www.mandrivalinux.com/en/errata.php3" #: install_steps.pm:253 #, c-format msgid "Duplicate mount point %s" msgstr "%s নকল মাউন্ট পয়েন্ট" #: install_steps.pm:469 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "কিছু গুরুত্বপূর্ণ প্যাকেজ সঠিকভাবে ইনস্টল হয়নি।\n" "হয় আপনার সিডিরম ড্রাইভ অথবা আপনার সিডিরম ত্রুটিপূর্ণ।\n" "কোন ইনস্টল কম্পিউটারে \"rpm -qpl media/main/*.rpm\" কমান্ডের মাধ্যমে সিডিরম " "পরীক্ষাকরুন\n" #: install_steps_auto_install.pm:75 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "`%s' স্টেপে প্রবেশ করছি\n" #: install_steps_gtk.pm:177 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandriva Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "আপনার সিস্টেমের রিসোর্স খুব কম। ম্যান্ড্রিব লিনাক্স ইনস্টল করার সময় আপনি সমস্যার " "মুখোমুখি\n" "হতে পারেন. যদি সেটা ঘটে, তাহলে আপনাকে এর পরিবর্তে টেক্স ইনস্টল করতে হবে। এর " "জন্য,\n" "যখন সিডিরম থেকে বুট হবে তখন `F1' চাপুন, তারপর `text' লিখুন।" #: install_steps_gtk.pm:224 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "প্যাকেজ গ্রুপ নির্বাচন" #: install_steps_gtk.pm:250 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "মোট সাইজ: %d / %d এমবি" #: install_steps_gtk.pm:295 #, c-format msgid "Bad package" msgstr "বাজে প্যাকেজ" #: install_steps_gtk.pm:297 #, c-format msgid "Version: " msgstr "ভার্সন:" #: install_steps_gtk.pm:298 #, c-format msgid "Size: " msgstr "সাইজ:" #: install_steps_gtk.pm:298 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:299 #, c-format msgid "Importance: " msgstr "প্রাধান্য:" #: install_steps_gtk.pm:332 #, c-format msgid "You can not select/unselect this package" msgstr "আপনি এই প্যাকেজটি নির্বাচন/অ-নির্বাচন করতে পারবেন না" #: install_steps_gtk.pm:336 #, c-format msgid "due to missing %s" msgstr "%s না থাকার কারনে" #: install_steps_gtk.pm:337 #, c-format msgid "due to unsatisfied %s" msgstr "%s যথেষ্ট না হবার কারনে" #: install_steps_gtk.pm:338 #, c-format msgid "trying to promote %s" msgstr "%s প্রচারের চেষ্টা চলছে" #: install_steps_gtk.pm:339 #, c-format msgid "in order to keep %s" msgstr "%s রাখার কারণে" #: install_steps_gtk.pm:344 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "আপনি এই প্যাকেজটি নির্বাচন করতে পারবেননা যেহেতু এটা ইনস্টল করার জন্য যথেষ্ট জায়গা " "ফাঁকা নেই" #: install_steps_gtk.pm:347 #, c-format msgid "The following packages are going to be installed" msgstr "এই প্যাকেজগুলি ইনস্টল হতে যাচ্ছে" #: install_steps_gtk.pm:348 #, c-format msgid "The following packages are going to be removed" msgstr "এই প্যাকেজগুলি অপসরিত হতে যাচ্ছে" #: install_steps_gtk.pm:372 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "এটি একটি বাধ্যতামূলাক প্যাকেজ, এটি কোনভাবেই বাদ দেয়া যাবেনা" #: install_steps_gtk.pm:374 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "" "আপনি এই প্যাকেজটির অ-নির্বাচন করতে পারবেন না, এটা আগে থেকেই ইনস্টল হয়ে আছে" #: install_steps_gtk.pm:377 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "এই প্যাকেজটি অবশ্যই আপগ্রেড করতে হবে।\n" "আপনি কি নিশ্চিত্‍‌ এটা অ-নির্বাচন করতে চান?" #: install_steps_gtk.pm:380 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "আপনি এই প্যাকেজটি অ-নির্বাচন করতে পারবেন না। এটা অবশ্যই আপগ্রেড হতে হবে" #: install_steps_gtk.pm:385 #, c-format msgid "Show automatically selected packages" msgstr "সংয়-নির্বাচিত প্যাকেজগুলি দেখাও" # সাম #: install_steps_gtk.pm:390 #, c-format msgid "Load/Save selection" msgstr "নির্বাচনসমূহ লোড/সংরক্ষণ করো" #: install_steps_gtk.pm:391 #, c-format msgid "Updating package selection" msgstr "প্যাকেজের নির্বাচন আপগ্রেড করা হচ্ছে" #: install_steps_gtk.pm:396 #, c-format msgid "Minimal install" msgstr "সর্বনিম্ন ইনস্টল" #: install_steps_gtk.pm:410 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "আপনি যেই প্যাকেজগুলি ইনস্টল করতে চান তা পছন্দ করুন" #: install_steps_gtk.pm:426 install_steps_interactive.pm:710 #, c-format msgid "Installing" msgstr "ইনস্টলেশন" #: install_steps_gtk.pm:433 #, c-format msgid "Estimating" msgstr "নির্ধারণ চলছে" #: install_steps_gtk.pm:482 #, c-format msgid "No details" msgstr "কোন বিস্তারিত ছাড়া" #: install_steps_gtk.pm:490 #, c-format msgid "Time remaining " msgstr "সময় বাকী আছে" #: install_steps_gtk.pm:497 #, c-format msgid "Please wait, preparing installation..." msgstr "ইনস্টলেশনের প্রস্তুতি চলছে, অনুগ্রহ করে অপেক্ষা করুন..." #: install_steps_gtk.pm:512 #, c-format msgid "%d packages" msgstr "%d প্যাকেজ সমূহ" #: install_steps_gtk.pm:517 #, c-format msgid "Installing package %s" msgstr "%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে" #: install_steps_gtk.pm:552 install_steps_interactive.pm:91 #: install_steps_interactive.pm:735 #, c-format msgid "Refuse" msgstr "অস্বীকার" #: install_steps_gtk.pm:556 install_steps_interactive.pm:739 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "আপনার সিডিরম পরিবর্তন করুন!\n" "অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে " "ঠিক আছে চাপুন।\n" "যদি সেটা আপনার না থাকে, এই সিডিরম থেকে ইনস্টলেশন এড়িয়ে যেতে বাতিল চাপুন।" #: install_steps_gtk.pm:571 install_steps_interactive.pm:750 #, c-format msgid "There was an error ordering packages:" msgstr "প্যাকেজগুলো বিন্যস্ত করতে গিয়ে একটি ভুল ছিল:" #: install_steps_gtk.pm:571 install_steps_gtk.pm:575 #: install_steps_interactive.pm:750 install_steps_interactive.pm:754 #, c-format msgid "Go on anyway?" msgstr "তবুও যাব?" #: install_steps_gtk.pm:575 install_steps_interactive.pm:754 #, c-format msgid "There was an error installing packages:" msgstr "এই প্যাকেজগুলি ইনস্টল করতে সমস্যা হয়েছে:" #: install_steps_gtk.pm:617 install_steps_interactive.pm:926 #: install_steps_interactive.pm:1075 #, c-format msgid "not configured" msgstr "কনফিগার করা হয়নি" #: install_steps_gtk.pm:680 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "নিম্নলিখিত ইনস্টলেশন মিডিয়া পাওয়া গেছে।\n" "যদি আপনি এগুলোর মধ্যকার কিছু এড়িয়ে যেতে চান, তাহলে এখন সেগুলোকে অনির্বাচিত করুন।" # সাম #: install_steps_gtk.pm:689 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "ইনস্টলেশনের আগে আপ‌নি সিডির তথ্যসমূহ হার্ডডিস্কে কপি করতে পারেন।\n" " এরপর হার্ডডিস্ক থেকে ইনস্টলেশন চলতে থাকবে এবং সিস্টেম সম্পূর্ন ইনস্টলেশনের পরও " "প্যাকেজগুলো রয়ে যাবে।" # সাম #: install_steps_gtk.pm:691 #, c-format msgid "Copy whole CDs" msgstr "CD গুলো সম্পুর্ন কপি করো " #: install_steps_interactive.pm:84 #, c-format msgid "License agreement" msgstr "লাইসেন্স এগ্রিমেন্ট" #: install_steps_interactive.pm:88 #, c-format msgid "Release Notes" msgstr "সংস্করণ মন্তব্য" #: install_steps_interactive.pm:118 #, c-format msgid "Please choose your keyboard layout." msgstr "অনুগ্রহ করে আপনার কীবোর্ড বিন্যাস পছন্দ করুন।" #: install_steps_interactive.pm:120 #, c-format msgid "Here is the full list of available keyboards" msgstr "এখানে উপস্থিত সমস্ত কীবোর্ডের তালিকা রয়োছে" #: install_steps_interactive.pm:150 #, c-format msgid "Install/Upgrade" msgstr "ইনস্টল/আপগ্রড" #: install_steps_interactive.pm:151 #, c-format msgid "Is this an install or an upgrade?" msgstr "এটা কি একটি ইনস্টলেশন না আপগ্রেড?" #: install_steps_interactive.pm:157 #, c-format msgid "Upgrade %s" msgstr "%s আপগ্রড করো" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "%s -এর জন্য এনক্রিপশন কী" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "আপনার মাউসের ধরণ পছন্দ করুন" #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "মাউস পোর্ট" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "অনুগ্রহ করে আপনার মাউসটি যে সিরিয়াল পোর্টের সাথে সংযুক্ত আছে তা পছন্দ করুন।" #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "মাউসের বাটনগুলোর অনুকরণ" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "২ বাটন বিশিষ্ট মাউসকে অনুকরণ করো" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "৩ বাটন বিশিষ্ট মাউসকে অনুকরণ করো" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "PCMCIA কার্ডগুলি কনফিগার করা হচ্ছে..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "IDE কনফিগারেশন চলছে" #: install_steps_interactive.pm:256 #, c-format msgid "No partition available" msgstr "কোন পার্টিশন বরাদ্দ নেই" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "মাউন্ট পয়েন্ট খোঁজার জন্য পার্টিশনগুলি স্কেন করা হচ্ছে" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "মাউন্ট পয়েন্টগুলি পছন্দ করুন" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "১ মেগাবাইটের bootstrap এর জন্য খালি জায়গা নেই! ইনস্টল অগ্রসর হবে, কিন্তু আপনার " "সিস্টেম বুট করার জন্য, আপনাকে DiskDrake থেকে bootstrap পার্টিশন তৈরী করতে হবে" # সাম: bootstrap = বুটস্ট্র্যাপ? #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "আপনাকে একটি PPC PReP Boot বুটস্ট্র্যাপ তৈরী করতে হবে! ইনস্টলেশন অগ্রসর হবে, তবে " "আপনার সিস্টেম বুট করার জন্য, DiskDrake এর বুটস্ট্র্যাপ পার্টিশনটি প্রয়োজন" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "ফরমেট করার জন্য পার্টিশনটি পছন্দ করুন" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "খারাপ ব্লক চেক করব?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "%s ফাইল সিস্টেম পরীক্ষা করতে ব্যার্থ হয়েছে। আপনি কি এই ত্রুটিগুলি সারাতে চান? (মনে " "রাখবেন যে আপনি ডাটা হারাতে পারেন)" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "ইনস্টলেশন সম্পূর্ন হবার জন্য যথেষ্ট swap জায়গা নেই, অনুগ্রহ করে কিছু যোগ করুন" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "উপস্থিত প্যাকেজসমুহ পর্যবেক্ষন করে আবার RMP ডাটাবেইজ তৈরী করা হচ্ছে..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "বরাদ্দকৃত প্যাকেজসমূহ খোঁজা হচ্ছে..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "যে সমস্থ প্যাকেজ ইনস্টল হয়ে আছে সেগুলি পর্যবেক্ষন করা হচ্ছে..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "আপগ্রেড করার জন্য প্যাকেজ খোঁজা হচ্ছে..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:830 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "আপনি একটি মিরর পছন্দ করুন যেখান থেকে প্যাকেজগুলি নেবেন" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "আপনার সিস্টেমর (%d > %d) ইনস্টল বা আপগ্রেড করার জন্য যথেষ্ট পরিমান জায়গা নেই" # সাম #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "অনুগ্রহ করে প্যাকেজ নির্বাচন লোড বা সংরক্ষণ বাছাই করুন।\n" "এই ফরম্যাটটি auto_install দ্বারা তৈরী ফাইলসমূহের মত।" #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "চাপ" #: install_steps_interactive.pm:497 standalone/drakbackup:3918 #: standalone/drakbackup:3991 standalone/drakroam:210 standalone/logdrake:172 #, c-format msgid "Save" msgstr "সংরক্ষণ" # সাম: # bad has been translated in many ways... নষ্ট, বাজে, খারাপ... please clarify #: install_steps_interactive.pm:505 #, c-format msgid "Bad file" msgstr "অগ্রহণযোগ্য ফাইল" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "উপস্থিত জায়গার চাইতে নির্বাচিত সাইজটি অনেক বড়" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "ইনস্টলের ধরণ" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "আপনি প্যাকেজের কোন গ্রুপ নির্বাচন করেননি।\n" "অনুগ্রহ করে আপনি যে ক্ষুদ্রাকৃতির ইনস্টলেশন চান তা পছন্দ করুন:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "সাধারন নির্দেশিকার সাথে (পরামর্শ দেয়া হচ্ছে!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "এক্কেবারেই ক্ষুদ্র ইনস্টলেশন (বিশেষ করে কোন urpmi ছাড়া)" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "সকল" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "নিচের লিষ্টের সব সিডিগুলি আপনার থাকেল, ঠিক আছে ক্লিক্ করুন।\n" "এগুলির কোনটিই যদি না থাকে তাহলে, বাতিল ক্লিক্ করুন।\n" "যদি কিছু সিডি না থাকে, তাহলে সেগুলি অনির্বাচিত করে ঠিক আছে ক্লিক্ করুন।" #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "\"%s\" লেভেলের সিডি-রম" #: install_steps_interactive.pm:710 #, c-format msgid "Preparing installation" msgstr "ইনস্টলেশনের প্রস্তুতি চলছে" #: install_steps_interactive.pm:719 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে\n" "%d%%" #: install_steps_interactive.pm:768 #, c-format msgid "Post-install configuration" msgstr "ইনস্টলের পরের কনফিগারেশন" #: install_steps_interactive.pm:775 #, c-format msgid "Please ensure the Update Modules media is in drive %s" msgstr "" #: install_steps_interactive.pm:804 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "আপনি এখন আপডেট প্যাকেজ ডাউনলোড করতে পারবেন। এই প্যাকেজগুলো\n" "এই ডিস্ট্রিবিউশন রিলিজ হবার পর আপডেট করতে পারেন। তারা নিরাপত্তা\n" "বা ত্রুটি নির্দিষ্ট ধারণ করতে পারে।\n" "\n" "এই প্যাকেজগুলো ডাউনলোড করতে, আপনার ইন্টারনেট সংযুক্তিতে কাজ করতে\n" "হবে।\n" "\n" "আপনি কি ইনস্টল আপডেট করতে চান?" #: install_steps_interactive.pm:825 #, c-format msgid "" "Contacting Mandriva Linux web site to get the list of available mirrors..." msgstr "উপস্থিত মিররের তালিকার জন্য Mandriva Linux-এ সংযুক্ত করা হচ্ছে..." #: install_steps_interactive.pm:844 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "প্যাকেজের তালিকার জন্য মিররের সাথে সংযুক্ত করা হচ্ছে..." #: install_steps_interactive.pm:848 #, c-format msgid "Unable to contact mirror %s" msgstr "%s মিররের সাথে সংযুক্ত হওয়া গেলনা" #: install_steps_interactive.pm:848 #, c-format msgid "Would you like to try again?" msgstr "আপনি কি আবার চেষ্টা করতে চান?" #: install_steps_interactive.pm:875 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "আপনার টাইমজোন কি?" #: install_steps_interactive.pm:880 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "সয়ংক্রিয়ভাবে সময় মেলাও (NTP ব্যবহার করে)" #: install_steps_interactive.pm:888 #, c-format msgid "NTP Server" msgstr "NTP সার্ভার" #: install_steps_interactive.pm:930 steps.pm:30 #, c-format msgid "Summary" msgstr "সারাংশ" #: install_steps_interactive.pm:943 install_steps_interactive.pm:951 #: install_steps_interactive.pm:969 install_steps_interactive.pm:976 #: install_steps_interactive.pm:1127 services.pm:133 #: standalone/drakbackup:1573 #, c-format msgid "System" msgstr "সি" #: install_steps_interactive.pm:983 install_steps_interactive.pm:1010 #: install_steps_interactive.pm:1027 install_steps_interactive.pm:1043 #: install_steps_interactive.pm:1054 #, c-format msgid "Hardware" msgstr "হার্ডওয়্যার" #: install_steps_interactive.pm:989 install_steps_interactive.pm:998 #, c-format msgid "Remote CUPS server" msgstr "দূরবর্তী CUPS সার্ভার" #: install_steps_interactive.pm:989 #, c-format msgid "No printer" msgstr "কোন প্রিন্টার নেই" #: install_steps_interactive.pm:1031 #, c-format msgid "Do you have an ISA sound card?" msgstr "আপনার কি একটি ISA সাউন্ড কার্ড আছে?" #: install_steps_interactive.pm:1033 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "ইনস্টল শেষ হবার পরে সাউন্ড কার্ড কনফিগার করার জন্য \"alsaconf\" অথবা \"sndconfig" "\" চালাও" #: install_steps_interactive.pm:1035 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "কোন সাউন্ডকার্ড সনাক্ত হয়নি, ইনস্টলের পরে \"harddrake\" দিয়ে চেষ্টা করুন" #: install_steps_interactive.pm:1055 #, c-format msgid "Graphical interface" msgstr "গ্রাফিকাল ইন্টারফেস" #: install_steps_interactive.pm:1061 install_steps_interactive.pm:1073 #, c-format msgid "Network & Internet" msgstr "নেটওয়ার্ট এবং ইন্টারনেট" #: install_steps_interactive.pm:1075 #, c-format msgid "configured" msgstr "কনফিগার করা হয়েছে" #: install_steps_interactive.pm:1084 install_steps_interactive.pm:1098 #: steps.pm:20 #, c-format msgid "Security" msgstr "সিকিউরিটি" #: install_steps_interactive.pm:1103 #, c-format msgid "activated" msgstr "সক্রিয় হয়েছে" #: install_steps_interactive.pm:1103 #, c-format msgid "disabled" msgstr "অকার্যকর করা হয়েছে" #: install_steps_interactive.pm:1114 #, c-format msgid "Boot" msgstr "বুট" # -PO: example: lilo-graphic on /dev/hda1 #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1118 #, c-format msgid "%s on %s" msgstr "%s -এ %s" #: install_steps_interactive.pm:1132 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "সার্ভিস সমূহ: %d সক্রিয় হয়েছে %d রেজিষ্টারের জন্য" #: install_steps_interactive.pm:1142 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "আপনি X কনফিগার করেননি। আপনি কি নিশ্চিত এরকমটি চান?" #: install_steps_interactive.pm:1223 #, c-format msgid "Preparing bootloader..." msgstr "Bootloader প্রস্তুত করা হচ্ছে..." #: install_steps_interactive.pm:1233 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" "আপনার মেশিনটি মনে হচ্ছে একটি Oldworld বা অজানা মেশিন, yaboot বুটলোডারটি আপনার " "জন্য কাজ করবে না। ইনস্টল এগিয়ে যাবে, কিন্তু আপনার মেশিনকে বুট করার জন্য আপনাকে " "BootX বা অন্য কোন কিছু ব্যবহার করতে হবে। root fs এর জন্য কার্নেল প্রেরিত মান হবে: " "root=%s" #: install_steps_interactive.pm:1239 #, c-format msgid "Do you want to use aboot?" msgstr "আপনি কি aboot ব্যবহার করতে চান?" #: install_steps_interactive.pm:1242 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Aboot ইনস্টলে ব্যর্থ হয়েছে,\n" "জোর করে ইনস্টলের চেষ্টা করবো যদিও সেটা প্রথম পার্টিশনকে নষ্ট করতে পারে?" #: install_steps_interactive.pm:1259 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "এই নিরাপত্তা লেভেলে, উইন্ডোজ পার্টিশনের ফাইলে প্রবেশ শুধুমাত্র অ্যাডমিনিস্ট্রেটরের আছে।" #: install_steps_interactive.pm:1288 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "%s ড্রাইভে একটি ফাঁকা ফ্লপি ঢোকান" #: install_steps_interactive.pm:1293 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "ড্রাইভারের ডিস্কের জন্য অন্য একটি ফ্লপি ঢোকান" #: install_steps_interactive.pm:1295 #, c-format msgid "Creating auto install floppy..." msgstr "সয়ং ইনস্টল ফ্লপি তৈরী করা হচ্ছে..." #: install_steps_interactive.pm:1307 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "কিছু ধাপ সম্পূর্ন করা যায়নি।\n" "\n" "আপনি কি এখন বের হতে চান?" #: install_steps_interactive.pm:1323 #, c-format msgid "Generate auto install floppy" msgstr "সয়ংক্রিয় ইনস্টল ফ্লপি প্রস্তুত করো" #: install_steps_interactive.pm:1325 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "যদি আপনি চান স্বয়ংক্রিয় ইনস্টল পুরোপুরি স্বয়ংক্রয়ভাবে হবে,\n" "সেক্ষেত্রে সেটা হার্ড ড্রাইভের কর্তৃত্বে!!\n" "(এর মানে হচ্ছে অন্য একটি বাক্সে ইনস্টল)।\n" "\n" "আপনি তার চেয়ে পুনরায় ইনস্টলেশন চালু করুন।\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandriva Linux Installation %s" msgstr "Mandriva Linux ইনস্টলেশন %s" # -PO: This string must fit in a 80-char wide text screen #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / উপাদানগুলোর মধ্যে | বাছাই | পরবর্তী স্ক্রীণ " #: interactive.pm:192 #, c-format msgid "Choose a file" msgstr "একটি ফাইল পছন্দ করুন" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakbackup:1514 #: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:619 #: standalone/drakroam:218 standalone/drakups:301 standalone/drakups:361 #: standalone/drakups:381 standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Add" msgstr "যোগ" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:249 #: standalone/draknfs:626 #, c-format msgid "Modify" msgstr "পরিবর্তন" #: interactive.pm:317 interactive/gtk.pm:505 standalone/drakhosts:256 #: standalone/draknfs:633 standalone/drakroam:202 standalone/drakups:303 #: standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:319 #: standalone/drakvpn:680 #, c-format msgid "Remove" msgstr "মুছে ফেলো" #: interactive.pm:394 #, c-format msgid "Basic" msgstr "সাধারণ" #: interactive.pm:432 interactive/newt.pm:321 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "সমাপ্ত" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "করো" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "বাজে পছন্দ, আবার চেষ্টা করুন\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "আপনার পছন্দ? (সাধারনত %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "এই এন্ট্রিগুলি আপনাকে পূরণ করতে হবে:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Your choice? (0/1, সাধারনত `%s')" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "বাটন `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "আপনি কি এই বাটনে ক্লিক করতে চান?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "আপনার পছন্দ? (সাধারনত `%s'%s)" #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " সঠিক এন্ট্রর জন্য `void' প্রবেশ করুন" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> (%s)-থেকে পছন্দ করার অনেক কিছু আছে।\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "সম্পাদিত করতে চান আপনার পছন্দের এমন ১০-রেজ্ঞের প্রথম সংখ্যাটিকে অনুগ্রহ করে আপনি " "বেছে নিন,\n" "অথবা শুধুমাত্র চালিয়ে যাও'তে হিট করুন।\n" "আপনার পছন্দ? " #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> নোটিশ, একটি নাম পরিবর্তিত হয়েছে:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "পুনরায়-পেশ" #: keyboard.pm:171 keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "চেজ (QWERTZ)" #: keyboard.pm:172 keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German" msgstr "জার্মান" #: keyboard.pm:173 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "ডিভোর্ক" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "স্পেনিশ" #: keyboard.pm:175 keyboard.pm:225 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "ফিনিস" #: keyboard.pm:176 keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "French" msgstr "ফ্রান্স" #: keyboard.pm:177 keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "নরিয়" #: keyboard.pm:178 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "পোলিশ" #: keyboard.pm:179 keyboard.pm:284 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "রাশিয়ান" #: keyboard.pm:181 keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "সুইডিশ" #: keyboard.pm:182 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "UK কি-বোর্ড" #: keyboard.pm:183 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "US কি-বোর্ড" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "আরবীয়" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "আরমেনীয় (পুরনো)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "আরমেনীয় (টাইপরাইটার)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "আরমেনীয় (উচ্চারণভিত্তিক)" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "আরবীয়" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "আজেরবাঈদজানি (ল্যাটিন)" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "বেলজিয়ান" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "বাংলা (ইনস্ক্রিপ্ট লে-আউট)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "বাংলা (প্রভাত লে-আউট)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "বুলগেরিয়ান (উচ্চারণভিত্তিক)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "বুলগেরিয়ান (BDS)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "ব্রাজিলিয়ান (ABNT-2)" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "বসনিয়ান" #: keyboard.pm:198 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "বেলুরাশিয়ান" #: keyboard.pm:200 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "সুইশ (জার্মান লে-আউট)" #: keyboard.pm:202 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "সুইশ (ফ্রেঞ্জ লে-আউট)" # sam: what about the leading '_: keyboard\n # banglish? #: keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "চেরোকী সিলাবিক্স" #: keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "চেজ (QWERTY)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "German (কোন dead key ছাড়া)" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "দৈবনগরী" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "ডেনিশ" #: keyboard.pm:211 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "ডেভোর্ক (US)" #: keyboard.pm:213 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "ডেভোর্ক (Esperanto)" # sam #: keyboard.pm:215 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "ডেভোরাক (ফ্রেঞ্চ‌)" # sam #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "ডেভোরাক (ইউকে)" #: keyboard.pm:218 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "ডেভোর্ক (Norwegian)" # sam #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "ডেভোরাক (পোলিশ)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "ডেভোর্ক (Swedish)" # sam #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "যংকা/তিব্বতীয়" #: keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "ইষ্টোনিয়ান" # sam #: keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "ফারোইয" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "জর্জিয়ান (\"রাশিয়ান\" লে-আউট)" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "জর্জিয়ান (\"ল্যাটিন\" লে-আউট)" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "গ্রীক" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "গ্রীক (পলিটোনিক)" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "গুজরাটি" #: keyboard.pm:234 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "গুর্মুখী" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "ক্রোয়েশিয়ান" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "হাঙ্গেরিয়ান" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "আইরিশ" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "ইসরাঈল" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "ইসরাঈল (উচ্চারণভিত্তিক)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "ইরানি" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "আইসল্যান্ডের" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "ইটালীয়ান" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "ইনাকটিটুট" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "জাপানীজ ১০৬ কী" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "কান্নাডা" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "কোরিয়ান কীবোর্ড" # sam #: keyboard.pm:254 #, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "কুর্দিশ (আরবী লিপি)" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "Kyrgyz কি-বোর্ড" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "ল্যাটিন আমেরিকান" #: keyboard.pm:258 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "ল্যাওটিআন" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "লিথ্যুনিয়ান AZERTY (আগের)" #: keyboard.pm:261 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "লিথ্যুনিয়ান AZERTY (নতুন)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "লিথ্যুনিয়ান \"number row\" QWERTY" #: keyboard.pm:263 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "লিথ্যুনিয়ান \"phonetic\" QWERTY" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "লাটভিয়ান" #: keyboard.pm:265 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "মালায়লাম" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "ম্যাসিডোনিয়ান" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "মিয়ানমার (বার্মিজ)" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "মঙ্গলীয়ান (কীরিল্লিক)" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "মালটেসে (ইউকে)" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "মালটেসে (ইউএস)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "ডাচ্‌" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "ওরিয়া" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "পোলিশ (qwerty লে-আউট)" #: keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "পোলিশ (qwertz লে-আউট)" # sam #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "পাশতু" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "পর্তুগীজ" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "কানাডিয়ান (Quebec)" #: keyboard.pm:282 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "রোমানিয়ান (qwertz)" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "রোমানিয়ান (qwerty)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "রাশিয়ান (উচ্চারণভিত্তিক)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "ছ্যামী (norwegian)" # আচ্ছা ফিনিস বানানটা অন্য কিছু লেখা উচিত্‍‌ না? কারন আমাদের দেশে ফিনিস বলতে একটা মশা মারার ঔষধের নাম বোঝায়। আর এখন যে ডেঙ্গু চারিদিকে!!! #: keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "ছ্যামী (সুইডিশ/ফিনিস)" # sam #: keyboard.pm:289 #, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "সিন্ধি" #: keyboard.pm:291 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "স্লোভেনিয়ান" #: keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Sinhala" msgstr "" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "স্লোভেকিয়ান (QWERTZ)" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "স্লোভেকিয়ান (QWERTY)" #: keyboard.pm:297 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "সার্বিয়ান (কিরিল্লিক)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "স্যাইরিক" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "স্যাইরিক (উচ্চারণভিত্তিক)" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "তেলেগু" #: keyboard.pm:302 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "তামিল (ISCII-লে-আউট)" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "তামিল (টাইপরাইটার-লে-আউট)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "থাই কী-বোর্ড (Kedmanee-লে-আউট)" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "থাই কী-বোর্ড (TIS-820-লে-আউট)" #: keyboard.pm:307 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "থাই কী-বোর্ড (Pattachote-লে-আউট)" #: keyboard.pm:310 #, c-format msgid "" "_: keyboard\n" "Tifinagh (moroccan layout) (+latin/arabic)" msgstr "" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (phonetic) (+latin/arabic)" msgstr "" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "তাজিক কী-বোর্ড" # sam #: keyboard.pm:315 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "তুর্কমেনীয়" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "টার্কিস (ঐতিহ্যবাহী \"F\" মডেল)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "টার্কিস (ঐতিহ্যবাহী \"Q\" মডেল)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "উকরানিয়ান" # sam #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "উর্দূ কিবোর্ড" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "US কী-বোর্ড (আন্তর্জাতিক)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "উজবেক (কীরিল্লিক)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "ভিয়েতনামিজ \"numeric row\" QWERTY" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "ইয়ুগস্লোভিয়ান (ল্যাটিন)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "ডান Alt কী" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "পরপর দু'টি Shift কী" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "পরপর Control এবং Shift কী" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "CapsLock কী" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Shift এবং CapsLock কী একই সাথে" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "পরপর Control এবং Alt কী" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "পরপর Alt এবং Shift কী" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "\"Menu\" কী" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "বাম \"Windows\" কী" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "ডান \"Windows\" কী" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "পরপর দু'টি Control কী" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "পরপর দু'টি Alt কী" #: keyboard.pm:347 #, c-format msgid "Left Shift key" msgstr "বাম Shift কী" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "ডান Shift কী" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "বাম Alt কী" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "ডান Alt কী" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "ডান Control কী" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করার জন্য এখানে\n" "আপনি কী বা কী এর কম্বিনেশন পছন্দ করতে পারেন\n" "(যেমন: ল্যাটিন এবং বাংলা)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "ইনস্টলেশন শেষ হবার পরে এটা সক্রিয় হবে।\n" "ইনস্টল চলাকালীন, আপনাকে ডান Control কী ব্যবহার\n" "করে বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করতে হবে।" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:178 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:195 #, c-format msgid "Andorra" msgstr "এনডোররা" #: lang.pm:196 network/adsl_consts.pm:943 #, c-format msgid "United Arab Emirates" msgstr "সংযুক্ত আরব আমিরাত" #: lang.pm:197 #, c-format msgid "Afghanistan" msgstr "আফগানিস্তান" #: lang.pm:198 #, c-format msgid "Antigua and Barbuda" msgstr "আংটিগুয়া এবং বারবুদা" #: lang.pm:199 #, c-format msgid "Anguilla" msgstr "অ্যাংগুইল্লিয়া" #: lang.pm:200 #, c-format msgid "Albania" msgstr "আলবেনিয়া" #: lang.pm:201 #, c-format msgid "Armenia" msgstr "আরমেনিয়া" #: lang.pm:202 #, c-format msgid "Netherlands Antilles" msgstr "নেদারল্যান্ড এ্যন্টিল্লিস" #: lang.pm:203 #, c-format msgid "Angola" msgstr "অ্যাংগোলা" #: lang.pm:204 #, c-format msgid "Antarctica" msgstr "এন্টার্কটিকা" #: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "আর্জেন্টিনা" #: lang.pm:206 #, c-format msgid "American Samoa" msgstr "আমেরিকান সামোয়া" #: lang.pm:209 #, c-format msgid "Aruba" msgstr "অরুবা" #: lang.pm:210 #, c-format msgid "Azerbaijan" msgstr "আজেরবাঈজান" #: lang.pm:211 #, c-format msgid "Bosnia and Herzegovina" msgstr "বসনিয়া এবং হার্জোগোভিনা" #: lang.pm:212 #, c-format msgid "Barbados" msgstr "বার্বাডোস" #: lang.pm:213 #, c-format msgid "Bangladesh" msgstr "বাংলাদেশ" #: lang.pm:215 #, c-format msgid "Burkina Faso" msgstr "বুর্কিনা ফাসো" #: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179 #, c-format msgid "Bulgaria" msgstr "বুলগেরিয়া" #: lang.pm:217 #, c-format msgid "Bahrain" msgstr "বাহরাইন" #: lang.pm:218 #, c-format msgid "Burundi" msgstr "বুরুন্ডি" #: lang.pm:219 #, c-format msgid "Benin" msgstr "বেনিন" #: lang.pm:220 #, c-format msgid "Bermuda" msgstr "বার্মুডা" #: lang.pm:221 #, c-format msgid "Brunei Darussalam" msgstr "ব্রুনেই দারুসসালাম" #: lang.pm:222 #, c-format msgid "Bolivia" msgstr "বলিভিয়া" #: lang.pm:224 #, c-format msgid "Bahamas" msgstr "বাহামা" #: lang.pm:225 #, c-format msgid "Bhutan" msgstr "ভূটান" #: lang.pm:226 #, c-format msgid "Bouvet Island" msgstr "বৌভেট দীপসমূহ" #: lang.pm:227 #, c-format msgid "Botswana" msgstr "বত্‌সওয়ানা" #: lang.pm:228 #, c-format msgid "Belarus" msgstr "বেলারুস" #: lang.pm:229 #, c-format msgid "Belize" msgstr "বেলিজে" #: lang.pm:231 #, c-format msgid "Cocos (Keeling) Islands" msgstr "কোকোস (কেলিং) দীপসমূহ" #: lang.pm:232 #, c-format msgid "Congo (Kinshasa)" msgstr "কঙ্গো (কিংশাসা)" #: lang.pm:233 #, c-format msgid "Central African Republic" msgstr "মধ্য আফ্রিকান গণপ্রজাতন্ত্র" #: lang.pm:234 #, c-format msgid "Congo (Brazzaville)" msgstr "কঙ্গো (ব্রাজ্জাভিল্লে)" #: lang.pm:236 #, c-format msgid "Cote d'Ivoire" msgstr "কোট ডি'লভোরে" #: lang.pm:237 #, c-format msgid "Cook Islands" msgstr "কুক দীপপুঞ্জ" #: lang.pm:238 #, c-format msgid "Chile" msgstr "চিলি" #: lang.pm:239 #, c-format msgid "Cameroon" msgstr "ক্যামেরুন" #: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 #: network/adsl_consts.pm:206 network/adsl_consts.pm:215 #: network/adsl_consts.pm:224 network/adsl_consts.pm:233 #: network/adsl_consts.pm:242 network/adsl_consts.pm:251 #: network/adsl_consts.pm:260 network/adsl_consts.pm:269 #: network/adsl_consts.pm:278 network/adsl_consts.pm:287 #: network/adsl_consts.pm:296 network/adsl_consts.pm:305 #: network/adsl_consts.pm:314 network/adsl_consts.pm:323 #: network/adsl_consts.pm:332 network/adsl_consts.pm:341 #: network/adsl_consts.pm:350 network/adsl_consts.pm:359 #, c-format msgid "China" msgstr "চীন" #: lang.pm:241 #, c-format msgid "Colombia" msgstr "কলম্বিয়া" #: lang.pm:243 #, c-format msgid "Serbia & Montenegro" msgstr "সারবিয়া এবং মোনটেংগ্র" #: lang.pm:244 #, c-format msgid "Cuba" msgstr "কিউবা" #: lang.pm:245 #, c-format msgid "Cape Verde" msgstr "কেপ ভার্দে" #: lang.pm:246 #, c-format msgid "Christmas Island" msgstr "ক্রিসমাস দীপপুঞ্জ" #: lang.pm:247 #, c-format msgid "Cyprus" msgstr "সাইপ্রাস" #: lang.pm:250 #, c-format msgid "Djibouti" msgstr "ডজিবুতি" #: lang.pm:252 #, c-format msgid "Dominica" msgstr "ডোমিনিকা" #: lang.pm:253 #, c-format msgid "Dominican Republic" msgstr "গণপ্রজাতন্ত্রী ডোমিনিকা" #: lang.pm:254 network/adsl_consts.pm:44 #, c-format msgid "Algeria" msgstr "আলজেরিয়া" #: lang.pm:255 #, c-format msgid "Ecuador" msgstr "ইকুয়েডর" #: lang.pm:257 #, c-format msgid "Egypt" msgstr "মিশর" #: lang.pm:258 #, c-format msgid "Western Sahara" msgstr "পশ্চিম সাহারা" #: lang.pm:259 #, c-format msgid "Eritrea" msgstr "এরিট্রিয়া" #: lang.pm:261 #, c-format msgid "Ethiopia" msgstr "ইথিওপিয়া" #: lang.pm:263 #, c-format msgid "Fiji" msgstr "ফুজি" #: lang.pm:264 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "ফোকল্যান্ড দীপপুঞ্জ (মালভিনাস)" #: lang.pm:265 #, c-format msgid "Micronesia" msgstr "মাক্রোনেশিয়া" #: lang.pm:266 #, c-format msgid "Faroe Islands" msgstr "ফারোয় দীপপুঞ্জ" #: lang.pm:268 #, c-format msgid "Gabon" msgstr "গ্যাবোন" #: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965 #: network/netconnect.pm:46 #, c-format msgid "United Kingdom" msgstr "যুক্তরাজ্য" #: lang.pm:270 #, c-format msgid "Grenada" msgstr "গ্রেনেডা" #: lang.pm:271 #, c-format msgid "Georgia" msgstr "জর্জিয়া" #: lang.pm:272 #, c-format msgid "French Guiana" msgstr "ফ্রেঞ্জ গায়ানা" #: lang.pm:273 #, c-format msgid "Ghana" msgstr "ঘানা" #: lang.pm:274 #, c-format msgid "Gibraltar" msgstr "জিব্রাল্টার" #: lang.pm:275 #, c-format msgid "Greenland" msgstr "গ্রীণল্যান্ড" #: lang.pm:276 #, c-format msgid "Gambia" msgstr "জাম্বিয়া" #: lang.pm:277 #, c-format msgid "Guinea" msgstr "গিনি" #: lang.pm:278 #, c-format msgid "Guadeloupe" msgstr "গুয়াদেলুপে" #: lang.pm:279 #, c-format msgid "Equatorial Guinea" msgstr "ইকুয়েটরিয়াল গিনি" #: lang.pm:281 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "দক্ষিন জর্জিয়া এবং দক্ষিন স্যান্ডউইচ্‌ দীপপুঞ্জ" #: lang.pm:282 #, c-format msgid "Guatemala" msgstr "গুয়াতেমালা" #: lang.pm:283 #, c-format msgid "Guam" msgstr "গুয়াম" #: lang.pm:284 #, c-format msgid "Guinea-Bissau" msgstr "গিনি-বিসাউ" #: lang.pm:285 #, c-format msgid "Guyana" msgstr "গায়ানা" #: lang.pm:286 #, c-format msgid "Hong Kong SAR (China)" msgstr "হংকং (চীন)" #: lang.pm:287 #, c-format msgid "Heard and McDonald Islands" msgstr "হার্ড এবং ম্যাকডোনাল্ড দীপপুঞ্জ" #: lang.pm:288 #, c-format msgid "Honduras" msgstr "হন্ডুরাস" #: lang.pm:289 #, c-format msgid "Croatia" msgstr "ক্রোয়েশিয়া" #: lang.pm:290 #, c-format msgid "Haiti" msgstr "হাইতি" #: lang.pm:292 #, c-format msgid "Indonesia" msgstr "ইন্দোনেশিয়া" #: lang.pm:295 #, c-format msgid "India" msgstr "ভারত" #: lang.pm:296 #, c-format msgid "British Indian Ocean Territory" msgstr "ব্রিটিশ ভারতীয় মহাসাগর সমরাজ্য" #: lang.pm:297 #, c-format msgid "Iraq" msgstr "ইরাক" #: lang.pm:298 #, c-format msgid "Iran" msgstr "ইরান" #: lang.pm:299 #, c-format msgid "Iceland" msgstr "আইসল্যান্ড" #: lang.pm:301 #, c-format msgid "Jamaica" msgstr "জামাইকা" #: lang.pm:302 #, c-format msgid "Jordan" msgstr "জর্ডান" #: lang.pm:304 #, c-format msgid "Kenya" msgstr "কেনিয়া" #: lang.pm:305 #, c-format msgid "Kyrgyzstan" msgstr "কিরগিজস্তান" #: lang.pm:306 #, c-format msgid "Cambodia" msgstr "কম্বোডিয়া" #: lang.pm:307 #, c-format msgid "Kiribati" msgstr "কিরিবাতি" #: lang.pm:308 #, c-format msgid "Comoros" msgstr "কমোরোস" #: lang.pm:309 #, c-format msgid "Saint Kitts and Nevis" msgstr "সেন্ট কিট্টস্‌ এবং নেভিস্‌" #: lang.pm:310 #, c-format msgid "Korea (North)" msgstr "কোরিয়া (উত্তর)" #: lang.pm:311 #, c-format msgid "Korea" msgstr "কোরিয়া" #: lang.pm:312 #, c-format msgid "Kuwait" msgstr "কুয়েত" #: lang.pm:313 #, c-format msgid "Cayman Islands" msgstr "কেম্যান দীপপুঞ্জ" #: lang.pm:314 #, c-format msgid "Kazakhstan" msgstr "কাজাকিস্তান" #: lang.pm:315 #, c-format msgid "Laos" msgstr "লাওস্‌" #: lang.pm:316 #, c-format msgid "Lebanon" msgstr "লেবানন" #: lang.pm:317 #, c-format msgid "Saint Lucia" msgstr "সেইন্ট লুইস" #: lang.pm:318 #, c-format msgid "Liechtenstein" msgstr "লিয়েচ্‌টেনস্তেইন" #: lang.pm:319 #, c-format msgid "Sri Lanka" msgstr "শ্রীলঙ্কা" #: lang.pm:320 #, c-format msgid "Liberia" msgstr "লাইবেরিয়া" #: lang.pm:321 #, c-format msgid "Lesotho" msgstr "লেসথো" #: lang.pm:322 network/adsl_consts.pm:600 #, c-format msgid "Lithuania" msgstr "লিথুয়েনিয়া" #: lang.pm:323 #, c-format msgid "Luxembourg" msgstr "লুক্সেমবার্গ" #: lang.pm:324 #, c-format msgid "Latvia" msgstr "লাটভিয়া" #: lang.pm:325 #, c-format msgid "Libya" msgstr "লিবিয়া" #: lang.pm:326 network/adsl_consts.pm:609 #, c-format msgid "Morocco" msgstr "মরক্কো" #: lang.pm:327 #, c-format msgid "Monaco" msgstr "মোনাকো" #: lang.pm:328 #, c-format msgid "Moldova" msgstr "মলডোভা" #: lang.pm:329 #, c-format msgid "Madagascar" msgstr "মাদাগাস্‌কার" #: lang.pm:330 #, c-format msgid "Marshall Islands" msgstr "মার্শাল দীপপুঞ্জ" #: lang.pm:331 #, c-format msgid "Macedonia" msgstr "ম্যাসিডোনিয়া" #: lang.pm:332 #, c-format msgid "Mali" msgstr "মালি" #: lang.pm:333 #, c-format msgid "Myanmar" msgstr "মিয়ানমার" #: lang.pm:334 #, c-format msgid "Mongolia" msgstr "মঙ্গোলীয়া" #: lang.pm:335 #, c-format msgid "Northern Mariana Islands" msgstr "উত্তর মারিয়ানা দীপপুঞ্জ" #: lang.pm:336 #, c-format msgid "Martinique" msgstr "মির্টিনিক্‌" #: lang.pm:337 #, c-format msgid "Mauritania" msgstr "মৌরিতানিয়া" #: lang.pm:338 #, c-format msgid "Montserrat" msgstr "মন্টসেরাত" #: lang.pm:339 #, c-format msgid "Malta" msgstr "মাল্টা" #: lang.pm:340 #, c-format msgid "Mauritius" msgstr "মরিসাস" #: lang.pm:341 #, c-format msgid "Maldives" msgstr "মালদ্বীপ" #: lang.pm:342 #, c-format msgid "Malawi" msgstr "মালাউ" #: lang.pm:343 #, c-format msgid "Mexico" msgstr "মেক্সিকো" #: lang.pm:344 #, c-format msgid "Malaysia" msgstr "মালয়েশিয়া" #: lang.pm:345 #, c-format msgid "Mozambique" msgstr "মোজাম্বিক" #: lang.pm:346 #, c-format msgid "Namibia" msgstr "নামিবিয়া" #: lang.pm:347 #, c-format msgid "New Caledonia" msgstr "নিউ ক্যালেডোনিয়া" #: lang.pm:348 #, c-format msgid "Niger" msgstr "নাইজার" #: lang.pm:349 #, c-format msgid "Norfolk Island" msgstr "নরফোক দীপপুঞ্জ" #: lang.pm:350 #, c-format msgid "Nigeria" msgstr "নাইজেরিয়া" #: lang.pm:351 #, c-format msgid "Nicaragua" msgstr "নাইসারাগুয়া" #: lang.pm:354 #, c-format msgid "Nepal" msgstr "নেপাল" #: lang.pm:355 #, c-format msgid "Nauru" msgstr "নাউরু" #: lang.pm:356 #, c-format msgid "Niue" msgstr "নিউও" #: lang.pm:358 #, c-format msgid "Oman" msgstr "ওমান" #: lang.pm:359 #, c-format msgid "Panama" msgstr "পানামা" #: lang.pm:360 #, c-format msgid "Peru" msgstr "পেরু" #: lang.pm:361 #, c-format msgid "French Polynesia" msgstr "ফ্রেঞ্জ পলিনেশিয়া" #: lang.pm:362 #, c-format msgid "Papua New Guinea" msgstr "পাপুয়া নিউগিনি" #: lang.pm:363 #, c-format msgid "Philippines" msgstr "ফিলিপাইন" #: lang.pm:364 #, c-format msgid "Pakistan" msgstr "পাকিস্তান" #: lang.pm:366 #, c-format msgid "Saint Pierre and Miquelon" msgstr "সেন্ট পিয়েরে এবং মুকুলন" #: lang.pm:367 #, c-format msgid "Pitcairn" msgstr "পিটকাইরন" #: lang.pm:368 #, c-format msgid "Puerto Rico" msgstr "পুয়ের্তোরিকো" #: lang.pm:369 #, c-format msgid "Palestine" msgstr "প্যালেস্টাইন" #: lang.pm:371 #, c-format msgid "Paraguay" msgstr "পারাগুয়ে" #: lang.pm:372 #, c-format msgid "Palau" msgstr "পালাউ" #: lang.pm:373 #, c-format msgid "Qatar" msgstr "কাতার" #: lang.pm:374 #, c-format msgid "Reunion" msgstr "রিইউনিয়ন" #: lang.pm:375 #, c-format msgid "Romania" msgstr "রোমানিয়া" #: lang.pm:377 #, c-format msgid "Rwanda" msgstr "রুয়ান্ডা" #: lang.pm:378 #, c-format msgid "Saudi Arabia" msgstr "সৌদী আরব" #: lang.pm:379 #, c-format msgid "Solomon Islands" msgstr "সলোমন দীপপুঞ্জ" #: lang.pm:380 #, c-format msgid "Seychelles" msgstr "সেইছিল্লেস" #: lang.pm:381 #, c-format msgid "Sudan" msgstr "সুদান" #: lang.pm:383 #, c-format msgid "Singapore" msgstr "সিঙ্গাপুর" #: lang.pm:384 #, c-format msgid "Saint Helena" msgstr "সেন্ট হেলেনা" #: lang.pm:385 network/adsl_consts.pm:747 #, c-format msgid "Slovenia" msgstr "স্লোভেনিয়া" #: lang.pm:386 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "স্ভালবার্দ এবং জান মায়ান দীপপুঞ্জ" #: lang.pm:388 #, c-format msgid "Sierra Leone" msgstr "সিয়েররা লেওয়ান" #: lang.pm:389 #, c-format msgid "San Marino" msgstr "সান মেরিনো" #: lang.pm:390 network/adsl_consts.pm:737 #, c-format msgid "Senegal" msgstr "সেনেগাল" #: lang.pm:391 #, c-format msgid "Somalia" msgstr "সোমালিয়া" #: lang.pm:392 #, c-format msgid "Suriname" msgstr "সুরিনাম" #: lang.pm:393 #, c-format msgid "Sao Tome and Principe" msgstr "সাও টোমি এবং প্রিন্সিপে" #: lang.pm:394 #, c-format msgid "El Salvador" msgstr "এই সাল্ভাদোর" #: lang.pm:395 #, c-format msgid "Syria" msgstr "সিরিয়া" #: lang.pm:396 #, c-format msgid "Swaziland" msgstr "সুইজারল্যান্ড" #: lang.pm:397 #, c-format msgid "Turks and Caicos Islands" msgstr "টার্ক এবং কাইকোস দীপপুঞ্জ" #: lang.pm:398 #, c-format msgid "Chad" msgstr "চাদ" #: lang.pm:399 #, c-format msgid "French Southern Territories" msgstr "দক্ষিন ফ্রান্স সাম্রাজ্য" #: lang.pm:400 #, c-format msgid "Togo" msgstr "টোগো" #: lang.pm:402 #, c-format msgid "Tajikistan" msgstr "তাজিকিস্তান" #: lang.pm:403 #, c-format msgid "Tokelau" msgstr "তোকেলাউ" #: lang.pm:404 #, c-format msgid "East Timor" msgstr "পূর্ব তিমুর" #: lang.pm:405 #, c-format msgid "Turkmenistan" msgstr "তুর্কমেনিস্তান" #: lang.pm:406 network/adsl_consts.pm:931 #, c-format msgid "Tunisia" msgstr "তানিসিয়া" #: lang.pm:407 #, c-format msgid "Tonga" msgstr "টঙ্গো" #: lang.pm:408 #, c-format msgid "Turkey" msgstr "তুর্কি" #: lang.pm:409 #, c-format msgid "Trinidad and Tobago" msgstr "ট্রিনিদাদ এবং টোবাগো" #: lang.pm:410 #, c-format msgid "Tuvalu" msgstr "টুভালু" #: lang.pm:412 #, c-format msgid "Tanzania" msgstr "তানজানিয়া" #: lang.pm:413 #, c-format msgid "Ukraine" msgstr "আকরাইসন" #: lang.pm:414 #, c-format msgid "Uganda" msgstr "উগান্ডা" #: lang.pm:415 #, c-format msgid "United States Minor Outlying Islands" msgstr "যুক্ত রাষ্ট্রের বাহিরের দীপপুঞ্জ" #: lang.pm:417 #, c-format msgid "Uruguay" msgstr "উরুগুয়ে" #: lang.pm:418 #, c-format msgid "Uzbekistan" msgstr "উজবেকিস্তান" #: lang.pm:419 #, c-format msgid "Vatican" msgstr "ভ্যাটিক্যান" #: lang.pm:420 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "সেন্ট ভিনসেন্ট এবং গ্রানাডা" #: lang.pm:421 #, c-format msgid "Venezuela" msgstr "ভেনিজুয়েলা" #: lang.pm:422 #, c-format msgid "Virgin Islands (British)" msgstr "ভার্জিন দীপপুঞ্জ (ব্রিটিশ)" #: lang.pm:423 #, c-format msgid "Virgin Islands (U.S.)" msgstr "ভার্জিন দীপপুঞ্জ (ইউ.এস)" #: lang.pm:424 #, c-format msgid "Vietnam" msgstr "ভিয়েতনাম" #: lang.pm:425 #, c-format msgid "Vanuatu" msgstr "ভানাতু" #: lang.pm:426 #, c-format msgid "Wallis and Futuna" msgstr "ওয়েলস্ এবং ফুটুনা" #: lang.pm:427 #, c-format msgid "Samoa" msgstr "সামোয়া" #: lang.pm:428 #, c-format msgid "Yemen" msgstr "ইয়েমান" #: lang.pm:429 #, c-format msgid "Mayotte" msgstr "মায়োত্তে" #: lang.pm:431 #, c-format msgid "Zambia" msgstr "জাম্বিয়া" #: lang.pm:432 #, c-format msgid "Zimbabwe" msgstr "জিম্বাবুয়ে" #: lang.pm:1079 #, c-format msgid "You should install the following packages: %s" msgstr "নিম্নের প্যাকেজসমুহ আপনার ইনস্টল করা উচিত: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1082 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1135 #, c-format msgid "Welcome to %s" msgstr "%s -এ আপনাকে স্বাগতম" #: lvm.pm:83 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "" #: lvm.pm:135 #, c-format msgid "Physical volume %s is still in use" msgstr "" #: lvm.pm:145 #, c-format msgid "Remove the logical volumes first\n" msgstr "প্রথমে লজিকাল ভলিউম সরিয়ে ফেলুন\n" #: lvm.pm:178 #, c-format msgid "The bootloader can't handle /boot on multiple physicals volumes" msgstr "" #: modules/interactive.pm:21 standalone/drakconnect:1028 #, c-format msgid "Parameters" msgstr "প্যারামিটার" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "নেই" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "মডিউল কনফিগারেশন" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "আপনি এখানে প্রত্যেক মডিউলের প্যারামিটার কন্‌ফিগার করতে পারেন।" #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "%s ইন্টারফেসসমূহ পাওয়া গিয়েছে" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "আপনার কি আরও একটি আছে?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "আপনার কি কোন %s ইন্টারফেস আছে?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "হার্ডওয়্যারের তথ্য দেখুন" # -PO: the first %s is the card type (scsi, network, sound,...) # -PO: the second is the vendor+model name #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "ইউএসবি কন্ট্রোলারের জন্য ড্রাইভার ইনস্টল করা হচ্ছে" # -PO: the first %s is the card type (scsi, network, sound,...) # -PO: the second is the vendor+model name #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "ফায়ারওয়ার কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে" # -PO: the first %s is the card type (scsi, network, sound,...) # -PO: the second is the vendor+model name #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "হার্ড ড্রাইভ কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে" # -PO: the first %s is the card type (scsi, network, sound,...) # -PO: the second is the vendor+model name #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "ইথার্নেট কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে" # -PO: the first %s is the card type (scsi, network, sound,...) # -PO: the second is the vendor+model name #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "%s, %s কার্ডের জন্য ড্রাইভার ইনস্টল করা হচ্ছে" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(মডিউল %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "আপনি এখন হয়তো %s মডিউলের জন্য অপশন প্রদান করবেন\n" "লক্ষ্য রাখবেন যাতেকরে প্রবেশ করানো ঠিকানাগুলি 0x প্রিফিক্স দিয়ে হয়, যেমন '0x123'" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "আপনি এখন %s মডিউলের অপশন পেতে পারেন।\n" "অপশনের ফরম্যাট হচ্ছে ``name=value name2=value2 ...''।\n" "এই মুহূর্তে, ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "মডিউলের অপশন সমূহ:" # -PO: the %s is the driver type (scsi, network, sound,...) # -PO: the %s is the driver type (scsi, network, sound,...) #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "আমি কোন %s ড্রাইভার চেষ্টা করব?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "কোন কোন ক্ষেত্রে, ঠিকমত কাজ করার %s ড্রাইভারের কিছু অতিরিক্ত তথ্য প্রয়োজন, যদিও " "এটা \n" "স্বাভাবিকভাবে ওগুলো ছাড়াই ভাল কাজ করে। আপনি কি এর জন্য অতিরিক্ত অপশন বেছে " "নিতেচান অথবা আপনার\n" "মেশিনের প্রয়োজনীয় তথ্য আপনার ড্রাইভার দিয়ে ঠিক করে নিতে চান?\n" "সাময়িকভাবে, এটি আপনার কম্পিউটারকে হ্যাং করবে, কিন্তু এটা কোন কিছু নষ্ট করবে না।" #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "স্বয়ংক্রিয় পরীক্ষা" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "অপশনসমূহ বর্ননা করুন" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "%s মডিউল লোড করতে ব্যর্থ।\n" "আপনি কি অন্য প্যারামিটার দিয়ে আবার চেষ্টা করতে চান?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "একটি নম্বর" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d কমা দিয়ে আলাদা করা নম্বর সমূহ" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d কমা দিয়ে আলাদা করা বাক্য সমূহ" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "কমা দিয়ে আলাদা করা নম্বর সমূহ" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "কমা দিয়ে আলাদা করা বাক্য সমূহ" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "সান - মাউস" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "সাধারণ" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "সাধারণ PS2 চাকা মাউস" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/modem.pm:73 network/modem.pm:87 network/modem.pm:92 #: network/modem.pm:125 network/netconnect.pm:585 network/netconnect.pm:590 #: network/netconnect.pm:602 network/netconnect.pm:607 #: network/netconnect.pm:623 network/netconnect.pm:625 #, c-format msgid "Automatic" msgstr "সয়ংক্রিয়" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking মাউস" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "জিনিয়াস NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "জিনিয়াস NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "মাইক্রসফ্ট এক্সপ্লোরার" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "১ বাটন" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "সাধারণ ২ বাটন মাউসের অনুকরণ করো" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "চাকার সাথে ৩ বাটন মাউসের অনুকরণ করো" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "চাকা" #: mouse.pm:55 #, c-format msgid "serial" msgstr "সিরিয়াল" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "সাধারণ ২৩ বাটন মাউস" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "মাইক্রসফ্ট IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "লজিটেক্ MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "চাকার অনুকরণে লজিটেক্ MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "মাউস সিস্টেম" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "লজিটেক্ CC সিরিজ" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "চাকার অনুকরণে লজিটেক্ CC সিরিজ" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "লজিটেক্ MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM সিরিজের" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM হিটট্যাবলেট" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "চাকার অনুকরণে Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "চাকা অনুকরণে Kensington Thinking Mouse" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmouse" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "২ বাটন" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "৩ বাটন" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "চাকা অনুকরণে ৩ বাটন" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "সর্বজনীন" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "যে কোন PS/2 এবং ইউএসবি মাউস" # sam #: mouse.pm:89 #, c-format msgid "Microsoft Xbox Controller S" msgstr "মাইক্রোসফ্ট Xbox Controller S" #: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126 #, c-format msgid "none" msgstr "না" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "কোন মাউস নেই" #: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435 #, c-format msgid "Synaptics Touchpad" msgstr "Synaptics Touchpad" #: mouse.pm:561 #, c-format msgid "Please test the mouse" msgstr "অনুগ্রহ করে মাউসটি পরীক্ষা করুন" #: mouse.pm:563 #, c-format msgid "To activate the mouse," msgstr "মাউসটি সক্রিয় করার জন্য," #: mouse.pm:564 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "আপনার মাউসের চাকাটি ঘোরান!" #: network/drakfirewall.pm:12 share/compssUsers.pl:85 #, c-format msgid "Web Server" msgstr "ওয়েব সার্ভার" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "ডোমেইন নেম সার্ভার (DNS)" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "SSH সার্ভার" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "FTP সার্ভার" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "মেইল সার্ভার" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "POP & IMAP সার্ভার" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "টেলনেট সার্ভার" # সাম #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "উইন্ডোজ ফাইলস শেয়ারিং (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "CUPS সার্ভার" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "Echo request (ping)" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "বিটTorrent" #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandriva Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized Mandriva Security Firewall distribution." msgstr "" "ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n" "\n" "এটি এই ম্যান্ড্রিব লিনাক্স মেশিনের জন্য একটী ব্যক্তিগত ফায়ারওয়াল কন্‌ফিগার করবে।\n" "একটি শক্তিশালী এবং একান্তভাবে নিযুক্ত ফায়ারওয়াল সমাধানের জন্য, অনুগ্রহ করে\n" "বিশেষ ম্যান্ড্রিব নিরাপত্তা ফায়ারওয়াল ডিস্ট্রিবিউশনে দেখুন।" #: network/drakfirewall.pm:164 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n" "\n" "নিশ্চিত হোন যে অন্য কিছু ব্যবহারের আগেই আপনি আপনার নেটওয়ার্ক/ইন্টারনেট প্রবেশ\n" "drakconnect দিয়ে কন্‌ফিগার করেছেন।" #: network/drakfirewall.pm:181 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "আপনার কোন কোন সার্ভিসগুলোকে ইন্টারনেট থেকে সংযুক্ত হবার ক্ষমতা দিতে চান?" #: network/drakfirewall.pm:182 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "আপনি একটি miscellaneous পোর্ট দিন। \n" "সঠিক উদাহরণ হচ্ছে: ১৩৯/tcp ১৩৯/udp ৬০০:৬১০/tcp ৬০০:৬১০/udp।\n" "তথ্যের জন্য /etc/services দেখুন।" #: network/drakfirewall.pm:188 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "ভুল পোর্ট দেয়া হয়েছে: %s।\n" "সঠিক ফরম্যাট হচ্ছে \"port/tcp\" বা \"port/udp\", \n" "যেখানে পোর্ট হচ্ছে ১ এবং ৬৫৫৩৫ এর মধ্যে।\n" "\n" "আপনি পোর্টের সীমাও দিয়ে দিতে পারেন (যেমন: 24300:24350/udp)" #: network/drakfirewall.pm:198 #, c-format msgid "Everything (no firewall)" msgstr "সবকিছু (কোন ফায়ারওয়াল ছাড়া)" #: network/drakfirewall.pm:200 #, c-format msgid "Other ports" msgstr "অন্যান্য পোর্ট" #: network/isdn.pm:118 network/netconnect.pm:459 network/netconnect.pm:546 #: network/netconnect.pm:549 network/netconnect.pm:692 #: network/netconnect.pm:696 #, c-format msgid "Unlisted - edit manually" msgstr "তালিকায় অন্তর্ভুক্ত নেই - নিজে নিজেই সম্পাদন করুন" #: network/isdn.pm:161 network/netconnect.pm:391 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:161 network/netconnect.pm:391 #, c-format msgid "I do not know" msgstr "আমি জানি না" #: network/isdn.pm:162 network/netconnect.pm:391 #, c-format msgid "PCI" msgstr "পি-সি-আই" #: network/isdn.pm:163 network/netconnect.pm:391 #, c-format msgid "USB" msgstr "ইউএসবি" #: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49 #: network/netconnect.pm:590 network/netconnect.pm:607 #: network/netconnect.pm:623 #, c-format msgid "Manual" msgstr "হাতে হাতে" #: network/ndiswrapper.pm:27 #, c-format msgid "No device supporting the %s ndiswrapper driver is present!" msgstr "" # সাম #: network/ndiswrapper.pm:33 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "উইন্ডোজ ড্রাইভারটি বেছে নিন (.inf ফাইল)" #: network/ndiswrapper.pm:42 #, c-format msgid "Unable to install the %s ndiswrapper driver!" msgstr "" #: network/ndiswrapper.pm:89 #, c-format msgid "Unable to load the ndiswrapper module!" msgstr "" #: network/ndiswrapper.pm:95 #, c-format msgid "" "The selected device has already been configured with the %s driver.\n" "Do you really want to use a ndiswrapper driver?" msgstr "" #: network/ndiswrapper.pm:101 #, c-format msgid "Unable to find the ndiswrapper interface!" msgstr "" #: network/netconnect.pm:69 network/netconnect.pm:489 #: network/netconnect.pm:496 #, c-format msgid "Manual choice" msgstr "হাতে হাতে পছন্দ" #: network/netconnect.pm:69 #, c-format msgid "Internal ISDN card" msgstr "ইন্টার্নাল ISDN কার্ড" #: network/netconnect.pm:80 printer/printerdrake.pm:1418 standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "স্বনির্বাচিত কনফিগারেশন" #: network/netconnect.pm:81 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "সয়ংক্রিয় IP (BOOTP/DHCP)" #: network/netconnect.pm:83 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "সয়ংক্রিয় IP (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:86 #, c-format msgid "Protocol for the rest of the world" msgstr "বাকী বিশ্বের জন্য প্রটোকল" #: network/netconnect.pm:88 standalone/drakconnect:563 #, c-format msgid "European protocol (EDSS1)" msgstr "ইউরোপীয় প্রটোকল (EDSS1)" #: network/netconnect.pm:89 standalone/drakconnect:564 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "বাকী বিশ্বের জন্য প্রটকোল\n" "কোন D-Channel ছাড়াই (ভাড়া নেয়া লাইনসমূহ)" #: network/netconnect.pm:121 network/thirdparty.pm:185 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch ইউএসবি মডেম" #: network/netconnect.pm:122 #, c-format msgid "Sagem USB modem" msgstr "Sagem ইউএসবি মডেম" #: network/netconnect.pm:123 #, c-format msgid "Bewan modem" msgstr "Bewan মডেম" #: network/netconnect.pm:124 #, c-format msgid "ECI Hi-Focus modem" msgstr "ECI Hi-Focus মডেম" #: network/netconnect.pm:128 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "ডায়নামিক হোস্ট কনফিগারেশন প্রটোকল (DHCP)" #: network/netconnect.pm:129 #, c-format msgid "Manual TCP/IP configuration" msgstr "হাতে হাতে TCP/IP কনফিগারেশন" #: network/netconnect.pm:130 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "পয়েন্ট টু পয়েন্ট টর্নেলিং প্রটোকল (PPTP)" #: network/netconnect.pm:131 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "Ethernet মাধ্যমে PPP (PPPoE)" #: network/netconnect.pm:132 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "ATM-এর মাধ্যমে PPP (PPPoA)" #: network/netconnect.pm:133 #, c-format msgid "DSL over CAPI" msgstr "CAPI উপরে DSL" #: network/netconnect.pm:137 #, c-format msgid "Bridged Ethernet LLC" msgstr "Bridged ইথারনেট LLC" #: network/netconnect.pm:138 #, c-format msgid "Bridged Ethernet VC" msgstr "Bridged ইথারনেট vC" #: network/netconnect.pm:139 #, c-format msgid "Routed IP LLC" msgstr "রাউটেড আই-পি LLC" #: network/netconnect.pm:140 #, c-format msgid "Routed IP VC" msgstr "রাউটেড আই-পি VC" #: network/netconnect.pm:141 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:142 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:146 standalone/drakconnect:498 #, c-format msgid "Script-based" msgstr "স্ক্রিপ্ট-ভিত্তিক" #: network/netconnect.pm:147 standalone/drakconnect:498 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:148 standalone/drakconnect:498 #, c-format msgid "Terminal-based" msgstr "টার্মিনাল-ভিত্তিক" #: network/netconnect.pm:149 standalone/drakconnect:498 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:150 standalone/drakconnect:498 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:155 #, c-format msgid "Open WEP" msgstr "" #: network/netconnect.pm:156 #, c-format msgid "Restricted WEP" msgstr "" #: network/netconnect.pm:157 #, c-format msgid "WPA Pre-Shared Key" msgstr "" #: network/netconnect.pm:247 standalone/drakconnect:56 #, c-format msgid "Network & Internet Configuration" msgstr "নেটওয়ার্ক এবং ইন্টারনেট কনফিগারেশন" #: network/netconnect.pm:253 #, c-format msgid "LAN connection" msgstr "LAN সংযোগ" #: network/netconnect.pm:254 network/netconnect.pm:273 #, c-format msgid "Wireless connection" msgstr "ওয়্যারলেস সংযোগ" #: network/netconnect.pm:255 #, c-format msgid "ADSL connection" msgstr "ASDL সংযোগ" #: network/netconnect.pm:256 #, c-format msgid "Cable connection" msgstr "কেবল সংযোগ" #: network/netconnect.pm:257 #, c-format msgid "ISDN connection" msgstr "ISDN কানেকশন" #: network/netconnect.pm:258 #, c-format msgid "Modem connection" msgstr "মডেম কানেকশন" #: network/netconnect.pm:259 #, c-format msgid "DVB connection" msgstr "" #: network/netconnect.pm:269 #, c-format msgid "Choose the connection you want to configure" msgstr "কনফিগারের জন্য আপনার সংযোগ পছন্দ করুন" #: network/netconnect.pm:284 network/netconnect.pm:771 #, c-format msgid "Connection Configuration" msgstr "সংযোগ কনফিগারেশন" #: network/netconnect.pm:284 network/netconnect.pm:772 #, c-format msgid "Please fill or check the field below" msgstr "অনুগ্রহ করে নিম্নের দেখুন অথবা পূরন করুন" #: network/netconnect.pm:287 #, c-format msgid "Your personal phone number" msgstr "আপনার ব্যক্তিগত ফোন নম্বর" #: network/netconnect.pm:288 network/netconnect.pm:775 #, c-format msgid "Provider name (ex provider.net)" msgstr "পরিবেশকের নাম (যেমন provider.net)" #: network/netconnect.pm:289 standalone/drakconnect:493 #, c-format msgid "Provider phone number" msgstr "পরিবেশকের ফোন নম্বর" #: network/netconnect.pm:290 #, c-format msgid "Provider DNS 1 (optional)" msgstr "পরিবেশকের DNS ১ (ঐচ্ছিক)" #: network/netconnect.pm:291 #, c-format msgid "Provider DNS 2 (optional)" msgstr "পরিবেশকের DNS ২ (ঐচ্ছিক)" #: network/netconnect.pm:292 standalone/drakconnect:444 #, c-format msgid "Dialing mode" msgstr "ডায়েলের ধরণ" #: network/netconnect.pm:293 standalone/drakconnect:449 #: standalone/drakconnect:517 #, c-format msgid "Connection speed" msgstr "সংযোগের গতি" #: network/netconnect.pm:294 standalone/drakconnect:454 #, c-format msgid "Connection timeout (in sec)" msgstr "সংযোগের টাইমআউট (সেকেন্ডে)" #: network/netconnect.pm:295 network/netconnect.pm:320 #: network/netconnect.pm:778 standalone/drakconnect:491 #, c-format msgid "Account Login (user name)" msgstr "একাউন্ট লগইন (ইউজারনেম)" #: network/netconnect.pm:296 network/netconnect.pm:321 #: network/netconnect.pm:779 standalone/drakconnect:492 #, c-format msgid "Account Password" msgstr "একাউন্ট পাসওয়ার্ড" #: network/netconnect.pm:297 standalone/drakconnect:554 #, c-format msgid "Card IRQ" msgstr "কার্ডের IRQ" #: network/netconnect.pm:298 standalone/drakconnect:555 #, c-format msgid "Card mem (DMA)" msgstr "কার্ড মেম (DMA)" #: network/netconnect.pm:299 standalone/drakconnect:556 #, c-format msgid "Card IO" msgstr "কার্ডের IO" #: network/netconnect.pm:300 standalone/drakconnect:557 #, c-format msgid "Card IO_0" msgstr "কার্ডের IO_০" #: network/netconnect.pm:301 #, c-format msgid "Card IO_1" msgstr "কার্ডের IO_১" # sam: cable? #: network/netconnect.pm:316 #, c-format msgid "Cable: account options" msgstr "ক্যাবল: একাউন্ট অপশনসমূহ" # সাম #: network/netconnect.pm:319 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "BPALogin ব্যবহার করুন (Telstra এর জন্য প্রয়োজন)" #: network/netconnect.pm:344 network/netconnect.pm:659 #: network/netconnect.pm:810 network/netconnect.pm:1110 #, c-format msgid "Select the network interface to configure:" msgstr "কনফিগার করার জন্য নেটওয়ার্কের ইন্টারফেস পছন্দ করুন:" #: network/netconnect.pm:346 network/netconnect.pm:381 #: network/netconnect.pm:660 network/netconnect.pm:812 network/shorewall.pm:69 #: standalone/drakconnect:709 #, c-format msgid "Net Device" msgstr "নেট ডিভাইস" #: network/netconnect.pm:347 network/netconnect.pm:352 #, c-format msgid "External ISDN modem" msgstr "বাহ্যিক ISDN মডেম" #: network/netconnect.pm:380 standalone/harddrake2:216 #, c-format msgid "Select a device!" msgstr "একটি যন্ত্র বেছে নিন!" #: network/netconnect.pm:389 network/netconnect.pm:399 #: network/netconnect.pm:409 network/netconnect.pm:442 #: network/netconnect.pm:456 #, c-format msgid "ISDN Configuration" msgstr "ISDN কনফিগারেশন" #: network/netconnect.pm:390 #, c-format msgid "What kind of card do you have?" msgstr "আপনার কি ধরনের কার্ড আছে?" #: network/netconnect.pm:400 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "যদি আপনার একটি ISA কার্ড থাকে, পরবর্তী স্ক্রীণের মানগুলো সঠিক হবে।\n" "\n" "যদি আপনার একটি PCMCIA কার্ড থাকে, আপনার কার্ডের \"irq\" এবং \"io\" আপনাকে " "জানতে হবে।\n" #: network/netconnect.pm:404 #, c-format msgid "Continue" msgstr "অগ্রসর" #: network/netconnect.pm:404 #, c-format msgid "Abort" msgstr "বাতিল" #: network/netconnect.pm:410 #, c-format msgid "Which of the following is your ISDN card?" msgstr "এগুলির মধ্যে কোনটি আপনার ISDN কার্ড?" #: network/netconnect.pm:428 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" "এই মডেমের জন্য একটি CAPI ড্রাইভার আছে। এই CAPI ড্রাইভার একটি ফ্রি ড্রাইভারের " "চেয়ে বেশি সুবিধা দেবে (ফ্যাক্স পাঠানোর মত)। আপনি কোন্‌ ড্রাইভার ব্যবহার করতে চান?" #: network/netconnect.pm:430 standalone/drakconnect:109 standalone/drakups:251 #: standalone/harddrake2:133 #, c-format msgid "Driver" msgstr "ড্রাইভার" #: network/netconnect.pm:442 #, c-format msgid "Which protocol do you want to use?" msgstr "আপনি কোন প্রটোকল ব্যবহার করতে চান?" #: network/netconnect.pm:444 standalone/drakconnect:109 #: standalone/drakconnect:300 standalone/drakconnect:562 #: standalone/drakvpn:1128 #, c-format msgid "Protocol" msgstr "প্রটোকল" #: network/netconnect.pm:456 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "আপনার পরিবেশক পছন্দ করুন।\n" "যদি তালিকাভূক্ত না থাকে, তাহলে তালিকায় নেই পছন্দ করুন।" #: network/netconnect.pm:458 network/netconnect.pm:545 #: network/netconnect.pm:691 #, c-format msgid "Provider:" msgstr "পরিবেশক:" #: network/netconnect.pm:467 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "এই সিস্টেম আপনার মডেম সাপোর্ট করেনা।\n" " http://www.linmodems.org-এ একবার দেখুন" #: network/netconnect.pm:486 #, c-format msgid "Select the modem to configure:" msgstr "কনফিগার করার জন্য মডেম নির্বাচন করুন:" #: network/netconnect.pm:514 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "আপনার মোডেমটি যেই সিরিয়াল পোর্টে সংযুক্ত আছে তা পছন্দ করুন।" #: network/netconnect.pm:543 #, c-format msgid "Select your provider:" msgstr "আপনার পরিবেশক নির্বাচন করুন:" #: network/netconnect.pm:567 #, c-format msgid "Dialup: account options" msgstr "ডায়েলআপ: একাউন্টের অপশন" #: network/netconnect.pm:570 #, c-format msgid "Connection name" msgstr "কানেকশনের নাম" #: network/netconnect.pm:571 #, c-format msgid "Phone number" msgstr "ফোন নম্বর" #: network/netconnect.pm:572 #, c-format msgid "Login ID" msgstr "লগইন আইডি" #: network/netconnect.pm:587 network/netconnect.pm:620 #, c-format msgid "Dialup: IP parameters" msgstr "ডায়েলআপ: IP প্যারামিটার" #: network/netconnect.pm:590 #, c-format msgid "IP parameters" msgstr "IP প্যারামিটারসমূহ" #: network/netconnect.pm:591 network/netconnect.pm:899 #: printer/printerdrake.pm:460 standalone/drakconnect:109 #: standalone/drakconnect:316 standalone/drakconnect:878 #: standalone/drakhosts:194 standalone/drakups:286 #, c-format msgid "IP address" msgstr "IP ঠিকানাসমূহ" #: network/netconnect.pm:592 #, c-format msgid "Subnet mask" msgstr "সাবনেট মাস্ক" #: network/netconnect.pm:604 #, c-format msgid "Dialup: DNS parameters" msgstr "ডায়েলআপ: DNS প্যারামিটার" #: network/netconnect.pm:607 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:608 #, c-format msgid "Domain name" msgstr "ডোমেইন নেম" #: network/netconnect.pm:609 network/netconnect.pm:776 #: standalone/drakconnect:993 #, c-format msgid "First DNS Server (optional)" msgstr "প্রথম DNS সার্ভার (ঐচ্ছিক)" #: network/netconnect.pm:610 network/netconnect.pm:777 #: standalone/drakconnect:994 #, c-format msgid "Second DNS Server (optional)" msgstr "দ্বিতীয় DNS সার্ভার (ঐচ্ছিক)" #: network/netconnect.pm:611 #, c-format msgid "Set hostname from IP" msgstr "IP থেকে হোস্টনেম সেট করুন" #: network/netconnect.pm:623 standalone/drakconnect:327 #, c-format msgid "Gateway" msgstr "গেটওয়ে" #: network/netconnect.pm:624 #, c-format msgid "Gateway IP address" msgstr "গেটওয়ে IP ঠিকানা" #: network/netconnect.pm:659 #, c-format msgid "ADSL configuration" msgstr "ADSL কনফিগারেশন" #: network/netconnect.pm:689 #, c-format msgid "Please choose your ADSL provider" msgstr "অনুগ্রহ করে একটি ADSL পরিবেশক পছন্দ করুন" #: network/netconnect.pm:719 #, c-format msgid "Connect to the Internet" msgstr "ইন্টারনেটে সংযুক্ত করো" #: network/netconnect.pm:720 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" "adsl এর সাথে সংযুক্ত হওয়ার সবচেয়ে সাধারণ উপায় হচ্ছে pppoe।\n" "কিছু সংযোগ PPTP ব্যবহার করে, কিছু DHCP ব্যবহার করে।\n" "যদি আপনি না জানেন, 'PPPoE ব্যবহার করুন' বেছে নিন" #: network/netconnect.pm:724 #, c-format msgid "ADSL connection type:" msgstr "ADSL সংযোগের ধরন:" #: network/netconnect.pm:781 #, c-format msgid "Virtual Path ID (VPI):" msgstr "ভার্চুয়াল পাথ আই-ডি(VPI):" #: network/netconnect.pm:782 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "ভার্চুয়াল সার্কিট আই-ডি(VCI):" #: network/netconnect.pm:785 #, c-format msgid "Encapsulation:" msgstr "এনক্যাপসুলেশন" #: network/netconnect.pm:812 #, c-format msgid "Manually load a driver" msgstr "আপনি নিজেই একটি ড্রাইভার লোড করান" # সাম #: network/netconnect.pm:812 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "একটি উইন্ডোজ ড্রাইভার ব্যবহার করুন (ndiswrapper এর সাথে)" #: network/netconnect.pm:819 network/netconnect.pm:1074 #: network/netconnect.pm:1078 printer/printerdrake.pm:3741 #: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292 #: standalone/drakgw:394 #, c-format msgid "Could not install the %s package!" msgstr "%s প্যাকেজটি ইনস্টল করা যায় নি!" #: network/netconnect.pm:855 #, c-format msgid "Zeroconf hostname resolution" msgstr "Zeroconf হোস্টের নাম রেজ্যুলুশন" #: network/netconnect.pm:856 network/netconnect.pm:886 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "%s নেটওয়ার্ক যন্ত্রটি কন্‌ফিগার হচ্ছে (ড্রাইভার %s)" #: network/netconnect.pm:857 #, c-format msgid "" "The following protocols can be used to configure a LAN connection. Please " "choose the one you want to use" msgstr "" #: network/netconnect.pm:887 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "অনুগ্রহ করে এই মেশিনের আই-পি কন্‌ফিগারেশন দিন।\n" "প্রত্যেক আইটেম একটি আই-পি অ্যাড্রেস হিসেবে dotted-decimal নোটেশনে দিতে \n" "হবে (উদাহরণস্বরুপ, 1.2.3.4)" #: network/netconnect.pm:894 standalone/drakconnect:373 #, c-format msgid "Assign host name from DHCP address" msgstr "DHCP ঠিকানা থেকে পাওয়া হোস্টের নাম" #: network/netconnect.pm:895 standalone/drakconnect:375 #, c-format msgid "DHCP host name" msgstr "DHCP হোস্টের নাম" #: network/netconnect.pm:900 standalone/drakconnect:321 #: standalone/drakconnect:879 standalone/drakgw:181 #, c-format msgid "Netmask" msgstr "নেটমাস্ক" #: network/netconnect.pm:902 standalone/drakconnect:437 #, c-format msgid "Track network card id (useful for laptops)" msgstr "নেটওয়ার্ক কার্ড আই-ডি ট্র্যাক করো (ল্যাপটপের জন্য ভাল)" #: network/netconnect.pm:904 standalone/drakconnect:438 #, c-format msgid "Network Hotplugging" msgstr "নেটওয়ার্ক Hotplugging" #: network/netconnect.pm:906 standalone/drakconnect:432 #, c-format msgid "Start at boot" msgstr "বুটের সময় চালু হবে" # সাম: পরিমাপক বা মেট্রিক (as in metric system) #: network/netconnect.pm:908 standalone/drakconnect:460 #, c-format msgid "Metric" msgstr "মেট্রিক" #: network/netconnect.pm:910 standalone/drakconnect:369 #: standalone/drakconnect:882 #, c-format msgid "DHCP client" msgstr "DHCP ক্লায়েন্ট" # sam #: network/netconnect.pm:912 standalone/drakconnect:379 #, c-format msgid "DHCP timeout (in seconds)" msgstr "DHCP টাইমআউট (সেকেন্ডে)" #: network/netconnect.pm:913 standalone/drakconnect:382 #, c-format msgid "Get DNS servers from DHCP" msgstr "DHCP থেকে DNS সার্ভারগুলো দেখাও " # সাম #: network/netconnect.pm:914 standalone/drakconnect:383 #, c-format msgid "Get YP servers from DHCP" msgstr "DHCP থেকে YP সার্ভারগুলো দেখাও " # সাম #: network/netconnect.pm:915 standalone/drakconnect:384 #, c-format msgid "Get NTPD servers from DHCP" msgstr "DHCP থেকে NTPD সার্ভারগুলো দেখাও " #: network/netconnect.pm:923 printer/printerdrake.pm:1672 #: standalone/drakconnect:672 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP ঠিকানা 1.2.3.4-এর মত হতে হবে" # সাম #: network/netconnect.pm:927 standalone/drakconnect:676 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "নেটমাস্ক 255.255.224.0 এই ফরম্যাটে হতে হবে" #: network/netconnect.pm:931 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "নির্দেশ : সাধারনত %s IP ঠিকানাগুলি রিজার্ভ থাকে !" #: network/netconnect.pm:936 standalone/drakTermServ:1816 #: standalone/drakTermServ:1817 standalone/drakTermServ:1818 #, c-format msgid "%s already in use\n" msgstr "%s ইতিমধ্যেই ব্যবহৃত হচ্ছে\n" # সাম #: network/netconnect.pm:969 #, c-format msgid "Choose an ndiswrapper driver" msgstr "একটি ndiswrapper ড্রাইভার বেছে নিন" #: network/netconnect.pm:971 #, c-format msgid "Use the ndiswrapper driver %s" msgstr "" # সাম #: network/netconnect.pm:971 #, c-format msgid "Install a new driver" msgstr "একটি নতুন ড্রাইভার ইনস্টল করুন" #: network/netconnect.pm:983 #, c-format msgid "Select a device:" msgstr "" #: network/netconnect.pm:1008 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "কার্ডের ওয়্যারলেস প্যারামিটার প্রবেশ করান" #: network/netconnect.pm:1011 standalone/drakconnect:404 #, c-format msgid "Operating Mode" msgstr "কার্যকারিতার ধরন" #: network/netconnect.pm:1012 #, c-format msgid "Ad-hoc" msgstr "Echo request (ping)" #: network/netconnect.pm:1012 #, c-format msgid "Managed" msgstr "ব্যবস্থা হয়েছে" #: network/netconnect.pm:1012 #, c-format msgid "Master" msgstr "মাষ্টার" #: network/netconnect.pm:1012 #, c-format msgid "Repeater" msgstr "রিপিটার" #: network/netconnect.pm:1012 #, c-format msgid "Secondary" msgstr "মাধ্যমিক" #: network/netconnect.pm:1012 #, c-format msgid "Auto" msgstr "সয়ংক্রিয়" #: network/netconnect.pm:1014 standalone/drakconnect:405 #, c-format msgid "Network name (ESSID)" msgstr "নেটওয়ার্কের নাম (ESSID)" #: network/netconnect.pm:1015 standalone/drakconnect:406 #, c-format msgid "Network ID" msgstr "নেটওয়ার্ক ID" #: network/netconnect.pm:1016 standalone/drakconnect:407 #, c-format msgid "Operating frequency" msgstr "কার্যকারিতার ফ্রিকুয়েন্সি" #: network/netconnect.pm:1017 standalone/drakconnect:408 #, c-format msgid "Sensitivity threshold" msgstr "প্রতিক্রিয়াশীল থ্রেশল্ড" #: network/netconnect.pm:1018 standalone/drakconnect:409 #, c-format msgid "Bitrate (in b/s)" msgstr "বিটরেট (b/s-এ)" #: network/netconnect.pm:1019 #, c-format msgid "Encryption mode" msgstr "" #: network/netconnect.pm:1023 standalone/drakconnect:420 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" # sam= # parameter has been translated as প্যারামিটার #: network/netconnect.pm:1024 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" "RTS/CTS প্রতিটি প্যাকেট প্রেরণের আগে চ্যানলটি খালি কিনা তা পরীক্ষা করার জন্য একটি " "হ্যান্ডশেক যোগ\n" "করে। এতে কিছুটা সময় ব্যয় হয় বটে তবে লুকানো নোডসমুহ ও বহুসংখ্যক স্বক্রিয় নোডের ক্ষেত্রে " "পারফরম্যান্স\n" "বাড়িয়ে দেয়। এ প্যারামিটারটি, একটি সবচেয়ে ছোট প্যাকেট যার জন্য একটি নোড RTS " "পাঠায়,\n" "তার সাইজ সেট করে, অতএব এখানে সর্বোচ্চ প্যাকেট সাইজের মানটি বসালে এই ব্যবস্থা " "নিষ্ক্রিয়\n" "হয়ে যায়। আপনি এই প্যারামিটারটি স্বয়ংক্রিয়, নির্ধারিত, বা বন্ধও সেট\n" "করতে পারেন।" #: network/netconnect.pm:1031 standalone/drakconnect:421 #, c-format msgid "Fragmentation" msgstr "ফ্রাগমেন্টেশন" #: network/netconnect.pm:1032 standalone/drakconnect:422 #, c-format msgid "Iwconfig command extra arguments" msgstr "Iwকন্‌ফিগ কমান্ড অতিরিক্ত আর্গুমেন্ট" #: network/netconnect.pm:1033 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" "এখানে, একজন কিছু তারবিহীন প্যারামিটার কন্‌ফিগার করতে পারে, যেমন:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick ইতিমধ্যেই হোস্টনেম " "হিসেবে সেট হয়ে গেছে)।\n" "\n" "অতিরিক্ত তথ্যের জন্য iwconfig(8) এর ম্যান পেজ দেখুন।" # -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1040 standalone/drakconnect:423 #, c-format msgid "Iwspy command extra arguments" msgstr "Iwস্পাই কমান্ড অতিরিক্ত আর্গুমেন্ট" #: network/netconnect.pm:1041 #, fuzzy, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" "Iwspy ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n" "তালিকা সেট করা এবং তার প্রতিটির সংযোগ এর মান সংক্রান্ত তথ্য পড়ার জন্য।\n" "\n" #: network/netconnect.pm:1050 standalone/drakconnect:424 #, c-format msgid "Iwpriv command extra arguments" msgstr "Iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট" #: network/netconnect.pm:1051 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:1066 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "ফ্রিকোয়েন্সির শেষে k, M বা G থাকতে হবে (উদাহরণস্বরুপ,২.৪৬ গিগাহার্জ ফ্রিকোয়েন্সীর " "জন্য \"2.46G\"),অথবা অনেকগুলো '0' (শূণ্য) যোগ করুন।" #: network/netconnect.pm:1070 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "ফ্রিকোয়েন্সির শেষে k, M বা G থাকতে হবে (উদাহরণস্বরুপ,১১M এর জন্য \"11M\"),অথবা " "অনেকগুলো '0' (শূণ্য) যোগ করুন।" #: network/netconnect.pm:1110 #, c-format msgid "DVB configuration" msgstr "" #: network/netconnect.pm:1111 #, c-format msgid "DVB Adapter" msgstr "" #: network/netconnect.pm:1128 #, c-format msgid "DVB adapter settings" msgstr "" #: network/netconnect.pm:1131 #, c-format msgid "Adapter card" msgstr "" #: network/netconnect.pm:1132 #, c-format msgid "Net demux" msgstr "" #: network/netconnect.pm:1133 #, c-format msgid "PID" msgstr "" #: network/netconnect.pm:1161 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "অনুগ্রহ করে আপনার হোস্টনেম দিন।\n" "আপনি হোস্টনেমটি যোগ্যতা-সম্পন্ন হোস্টনেম হওয়া উচিত,\n" "যেমন ``mybox.mylab.myco.com''।\n" "যদি আপনার কোন গেটওয়ে থাকে তাহলে তার আই-পি অ্যাড্রেস দিন" #: network/netconnect.pm:1166 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" "শেষ কিন্তু সবচেয়ে ছোট নয় আপনি আপনার ডি-এন-এস সার্ভারের আই-পি অ্যাড্রেসগুলো টাইপ " "করে দিতে পারেন।" #: network/netconnect.pm:1168 standalone/drakconnect:992 #, c-format msgid "Host name (optional)" msgstr "হোস্টের নাম (ঐচ্ছিক)" #: network/netconnect.pm:1168 standalone/drakhosts:194 #, c-format msgid "Host name" msgstr "হোস্টের নাম" #: network/netconnect.pm:1170 #, c-format msgid "DNS server 1" msgstr "DNS সার্ভার ১" #: network/netconnect.pm:1171 #, c-format msgid "DNS server 2" msgstr "DNS সার্ভার ২" #: network/netconnect.pm:1172 #, c-format msgid "DNS server 3" msgstr "DNS সার্ভার ৩" #: network/netconnect.pm:1173 #, c-format msgid "Search domain" msgstr "ডোমেইনের খোঁজ" #: network/netconnect.pm:1174 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "ডিফল্টভাবে ডোমেইন সন্ধান যোগ্যতা-সম্পন্ন হোস্ট-নেম থেকে নির্দিষ্ত হবে" #: network/netconnect.pm:1175 #, c-format msgid "Gateway (e.g. %s)" msgstr "গেটওয়ে (e.g. %s)" #: network/netconnect.pm:1177 #, c-format msgid "Gateway device" msgstr "গেটওয়ে ডিভাইস" #: network/netconnect.pm:1186 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "DNS সার্ভারের ঠিকানা 1.2.3.4-এর মত হতে হবে" #: network/netconnect.pm:1191 standalone/drakconnect:681 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "গেটওয়ে ঠিকানা 1.2.3.4-এর মত হতে হবে" #: network/netconnect.pm:1204 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" "যদি চায়, তাহলে একটি Zeroconf হোস্টনেম দিন।\n" "এটি আপনার মেশিনের নাম যা ব্যবহার করে নেটওয়ার্ক যা করে দিতে \n" "পারে না সেই রিসোর্স ভাগাভাগিতে সাহায্য করবে।\n" "এটি বেশিরভাগ নেটওয়ার্কের ক্ষেত্রে জরুরী নয়।" #: network/netconnect.pm:1208 #, c-format msgid "Zeroconf Host name" msgstr "Zeroconf হোস্টের নাম" #: network/netconnect.pm:1211 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Zeroconf হোস্টের নামে অবশ্যই a থাকবে না ।" # সাম # বুট হবার সাথে সাথে #: network/netconnect.pm:1221 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "আপনি কি ব্যবহারকারীদের সংযোগ স্থাপন শুরু করতে দিতে চান?" #: network/netconnect.pm:1234 #, c-format msgid "Do you want to start the connection at boot?" msgstr "আপনি কি বুট হবার সাথে সাথে সংযোগ স্থাপন করতে চান?" #: network/netconnect.pm:1249 #, c-format msgid "Automatically at boot" msgstr "বুট এর সময় সয়ংক্রিয় ভাবে" #: network/netconnect.pm:1251 #, c-format msgid "By using Net Applet in the system tray" msgstr "সিস্টেম ট্রে'তে নেট অ্যাপলেট ব্যবহার করে" #: network/netconnect.pm:1253 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "হাতে হাতে (ইন্টারফেস এখনও বুট হওয়ার সময় সক্রিয় হবে)" #: network/netconnect.pm:1262 #, c-format msgid "How do you want to dial this connection?" msgstr "আপনি কিভাবে ডায়াল করে এই সংযোগ স্থাপন করতে চান?" #: network/netconnect.pm:1275 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "আপনি কি এখন ইন্টার্নেটের সাথে সংযুক্ত হবার চেষ্টা করবেন?" #: network/netconnect.pm:1283 standalone/drakconnect:1024 #, c-format msgid "Testing your connection..." msgstr "আপনার কানেকশন পরীক্ষা করা হচ্ছে..." #: network/netconnect.pm:1303 #, c-format msgid "The system is now connected to the Internet." msgstr "সিস্টেম এখন ইন্টারনেটে সংযুক্ত হবে।" #: network/netconnect.pm:1304 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "নিরাপত্তা কারণে, এটা এখন বিচ্ছিন্ন হবে।" #: network/netconnect.pm:1305 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "সিস্টেম ইন্টারনেটে সংযুক্ত আছে বলে মনে হয় না।\n" "আপনার সংযুক্তি পুনরায় কন্‌ফিগার করার চেষ্টা করুন।" #: network/netconnect.pm:1320 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "অভিনন্দন, নেটওয়ার্ক এবং ইন্টারনেট কন্‌ফিগারেশন শেষ হয়ে গেছে।\n" "।\n" #: network/netconnect.pm:1323 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "এটা হয়ে যাবার পর, আমরা সুপারিশ করি যে হোস্টনেমের সংক্রান্ত সমস্যাগুলো এড়ানোর জন্য " "আপনার X এনভায়রনমেন্ট পুনরায় চালু করুন।" #: network/netconnect.pm:1324 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "কন্‌ফিগারেশনের সময় সমস্যা হয়ে গেছে।\n" "net_monitor বা mcc এর মাধ্যমে আপনার সংযুক্ত পরীক্ষা করুন। যদি আপনার সংযুক্তি কাজ না " "করে, তাহলে আপনাকে পুনরায় কন্‌ফিগারেশন করতে হবে।" #: network/netconnect.pm:1335 #, c-format msgid "(detected on port %s)" msgstr "(%s পোর্টে সনাক্ত হয়েছে)" # -PO: here, "(detected)" string will be appended to eg "ADSL connection" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:1337 #, c-format msgid "(detected %s)" msgstr "(%s সনাক্ত হয়েছে)" #: network/netconnect.pm:1337 #, c-format msgid "(detected)" msgstr "(সনাক্ত হয়েছে)" #: network/netconnect.pm:1338 #, c-format msgid "Network Configuration" msgstr "নেটওয়ার্ক কনফিগারেশন" #: network/netconnect.pm:1339 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "কারণ আপনি একটি নেটওয়ার্ক ইনস্টল করছেন, আপনার নেটওয়ার্ক ইতিমধ্যেই কন্‌ফিগার করা " "আছে।\n" "কন্‌ফিগারেশন বজায় রাখতে ঠিক আছে'তে ক্লিক করুন, অথবা আপনার ইন্টারনেট এবং নেটওয়ার্ক " "সংযুক্তি পুনরায়পুনরায় কন্‌ফিগার করতে বাতিল ক্লিক করুন।\n" #: network/netconnect.pm:1342 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "নোটওয়ার্কের রিষ্টার্টের প্রয়োজন। আপনি কি রি-ষ্টার্ট করতে চান?" #: network/netconnect.pm:1343 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "নেটওয়ার্ক রি-ষ্টার্ট করার সময় একটি সমস্যা হয়েছে: \n" "\n" "%s" #: network/netconnect.pm:1344 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "আপনি এখন %s সংযোগ কনফিগার করতে যাচ্ছেন।\n" "\n" "\n" " অগ্রসর হবার জন্য \"%s\" চাপুন।" #: network/netconnect.pm:1345 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "কনফিগারেশন সম্পূর্ন হয়েছে, আপনি কি সেটিংগুলি প্রয়োগ করতে চান?" #: network/netconnect.pm:1346 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "আপনি ইন্টারনেটের সংযুক্তির বিভিন্ন উপায় কন্‌ফিগার করেছেন।\n" "যেটি আপনি ব্যবহার করতে চান বেছে নিন।\n" "\n" #: network/netconnect.pm:1347 #, c-format msgid "Internet connection" msgstr "ইন্টারনেট সংযোগ" #: network/netconnect.pm:1364 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "একটি অনাকাঙ্খিত ভুল ঘটে গেছে:\n" "%s" #: network/network.pm:390 #, c-format msgid "Proxies configuration" msgstr "প্রক্সিসমূহের কনফিগারেশন" #: network/network.pm:391 #, c-format msgid "HTTP proxy" msgstr "HTTP প্রক্সি" #: network/network.pm:392 #, c-format msgid "FTP proxy" msgstr "FTP প্রক্সি" #: network/network.pm:395 #, c-format msgid "Proxy should be http://..." msgstr "প্রক্সি http://..... হওয়া উচিত্‍‌" #: network/network.pm:396 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL 'ftp:' অথবা 'http:' দিয়ে শুরু হওয়া উচিত্‍‌" #: network/shorewall.pm:54 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "অনুগ্রহ করে ইন্টারনেটে সংযুক্ত ইন্টারফেসটির নাম দিন।\n" "\n" "যেমন:\n" "\t\tppp+ মডেম বা ডি-এস-এল সঙযুক্তির জন্য, \n" "\t\teth0, বা ক্যাবল সংযুক্তির জন্য eth1, \n" "\t\tippp+ একটি isdn সংযুক্তির জন্য।\n" #: network/thirdparty.pm:197 #, fuzzy, c-format msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/" msgstr "" "আপনার Alcatel-এর microcode প্রয়োজন।\n" "এটা ডাউনলোড করতে পারবেন এই ঠিকানা থেকে:\n" "%s\n" "এবং mgmt.o-টি /usr/share/speedtouch-এ কপি করে দিন" #: network/thirdparty.pm:206 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" "বাইনারি ড্রাইভার ডিস্ট্রিবিউশন সমস্যার জন্য ECI Hi-Focus মডেম সমর্থন নেই।\n" "\n" "আপনি http://eciadsl.flashtux.org/ থেকে ড্রাইভার পেতে পারেন" #: network/thirdparty.pm:267 #, fuzzy, c-format msgid "Could not install the packages (%s)!" msgstr "%s প্যাকেজগুলি ইনস্টল করা গেলোনা!" #: network/thirdparty.pm:275 #, c-format msgid "Some packages (%s) are required but aren't available." msgstr "" #: network/thirdparty.pm:276 #, c-format msgid "" "These packages can be found in Mandriva Club or in Mandriva commercial " "releases." msgstr "" #: network/thirdparty.pm:277 #, c-format msgid "" "The required files can also be installed from this URL:\n" "%s" msgstr "" #: network/thirdparty.pm:310 #, fuzzy, c-format msgid "Unable to find \"%s\" on your Windows system!" msgstr "আপনার সিস্টেম থেকে ফন্ট মুছে ফেলুন" #: network/thirdparty.pm:312 #, c-format msgid "No Windows system has been detected!" msgstr "" #: network/thirdparty.pm:322 #, c-format msgid "Insert floppy" msgstr "ফ্লপি প্রবেশ করান" # বহু কথা বলতে হচ্ছে। ব্যবহারকারী হাঁফসে যাবে ;) #: network/thirdparty.pm:323 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "%s ড্রাইভে FAT ফরম্যাট করা একটি ফ্লপি প্রবেশ করান যার রুট ডিরেক্টরিতে %s আছে এবং %" "s চাপুন" #: network/thirdparty.pm:333 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "ফ্লপি ব্যবহার করা যাচ্ছেনা, %s ডিভাইস মাউন্ট করা সম্ভব হয়নি" #: network/thirdparty.pm:343 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "আপনার Alcatel-এর microcode প্রয়োজন।\n" "আপনি ফ্লপি দিয়ে বা উইন্ডোজ পার্টিশন থেকে এখন এটা সরবরাহ করতে পারেন,\n" "বা পরে করার জন্য এখন উপেক্ষা করতে পারেন।" #: network/thirdparty.pm:347 network/thirdparty.pm:349 #, c-format msgid "Use a floppy" msgstr "একটি ফ্লপি ব্যবহার করো" #: network/thirdparty.pm:347 #, c-format msgid "Use my Windows partition" msgstr "আমার উইন্ডোজ পার্টিশন ব্যবহার করো" #: network/thirdparty.pm:357 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "ফার্মওয়্যার কপি ব্যার্থ হয়োছে, %s ফাইলটি পাওয়া যায়নি" #: network/thirdparty.pm:362 standalone/drakautoinst:250 #: standalone/drakvpn:888 standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "অভিনন্দন!" #: network/thirdparty.pm:362 #, c-format msgid "Firmware copy succeeded" msgstr "ফার্মওয়্যার কপি সফল হয়েছে" #: network/thirdparty.pm:427 #, c-format msgid "Looking for required software and drivers..." msgstr "" #: network/thirdparty.pm:437 #, fuzzy, c-format msgid "Please wait, running device configuration commands..." msgstr "অনুগ্রহ করে অপেক্ষা করুন, ডিভাইসগুলি সনাক্ত এবং কনফিগার করা হচ্ছে..." #: partition_table.pm:391 #, c-format msgid "mount failed: " msgstr "মাউন্ট হয়নি:" #: partition_table.pm:496 #, c-format msgid "Extended partition not supported on this platform" msgstr "এই প্লাটফর্মে এক্সটেনডেড পার্টিশন সাপোর্ট করেনা" #: partition_table.pm:514 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "আপনার পার্টিশন টেবিলে একটি ত্রুটি আছে কিন্তু তা আমি ব্যবহার করতে পারছি না।\n" "একমাত্র সমাধান হচ্ছে আপনার প্রাইমারি পার্টিশনের ত্রুটিকে Extended পার্টিশনে সরিয়ে " "নেয়া। " #: partition_table.pm:605 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s ফাইল থেকে পুনরায় সংরক্ষণ করতে ব্যর্থ হয়েছে: %s" #: partition_table.pm:607 #, c-format msgid "Bad backup file" msgstr "নষ্ট ব্যাকআপ ফাইল" #: partition_table.pm:627 #, c-format msgid "Error writing to file %s" msgstr "%s ফাইলে লিখতে সমস্যা হয়েছে" #: partition_table/raw.pm:252 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "আপনার ড্রাইভে কোন সমস্যা ঘটেছে। \n" "ডাটা পরীক্ষা করার টেস্ট করতে গিয়ে ব্যর্থ হয়েছে। \n" "এর মানে হচ্ছে ডিস্কে কোন কিছু লিখতে গেলে তা বিভিন্ন রকম, সমস্যাযুক্ত ডাটায়গিয়ে শেষ " "হয়।" #: pkgs.pm:21 #, c-format msgid "must have" msgstr "অবশ্যই থাকতে হবে" #: pkgs.pm:22 #, c-format msgid "important" msgstr "জরুরী" #: pkgs.pm:23 #, c-format msgid "very nice" msgstr "খুবই সুন্দর" #: pkgs.pm:24 #, c-format msgid "nice" msgstr "সুন্দর" #: pkgs.pm:25 #, c-format msgid "maybe" msgstr "হয়তোবা" # সাম #: pkgs.pm:458 #, c-format msgid "Downloading file %s..." msgstr "%s ফাইল ডাউনলোড করা হচ্ছে..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(%s -এ)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(এই মেশিনে)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "অন্য মেশিনে কনফিগার করা রয়েছে" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS সার্ভারে \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4761 #: printer/printerdrake.pm:4771 printer/printerdrake.pm:4916 #: printer/printerdrake.pm:4927 printer/printerdrake.pm:5137 #, c-format msgid " (Default)" msgstr "(স্বাভাবিক)" #: printer/data.pm:60 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - প্রিন্ট করো, সারিতে রাখবেনা" #: printer/data.pm:61 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:73 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - লাইন প্রিন্টার ডেমন" #: printer/data.pm:74 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:95 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR নতুন প্রজন্ম" #: printer/data.pm:96 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:121 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - সাধারণ ইউনিক্স প্রিন্টিং সিস্টেম" #: printer/data.pm:151 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - সাধারণ ইউনিক্স প্রিন্টিং সিস্টেম (দুরবর্তী সার্ভার)" #: printer/data.pm:152 #, c-format msgid "Remote CUPS" msgstr "দূরবর্তী CUPS সার্ভার" #: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441 #: printer/detect.pm:478 #, c-format msgid "Unknown Model" msgstr "অপরিচিত মডেল" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "স্থানীয় প্রিন্টার" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "দূরবর্তী প্রিন্টার" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "দূরবর্তী CUPS সার্ভারে প্রিন্টার" #: printer/main.pm:30 printer/printerdrake.pm:1150 #: printer/printerdrake.pm:1695 #, c-format msgid "Printer on remote lpd server" msgstr "দূরবর্তী lpd সার্ভারে প্রিন্টার" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "নেটওয়ার্ক প্রিন্টার (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/উইন্ডোজ 95/98/NT সার্ভারে প্রিন্টার" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "NetWare সার্ভারে প্রিন্টার" #: printer/main.pm:34 printer/printerdrake.pm:1699 #, c-format msgid "Enter a printer device URI" msgstr "প্রিন্টার যন্ত্রের ইউ-আর-আই লিখুন" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "একটি কমান্ডে পাইপ (pipe) কাজ(job)" #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "পরামর্শ দেওয়া হচ্ছে" #: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671 #: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910 #: printer/printerdrake.pm:2182 printer/printerdrake.pm:5174 #, c-format msgid "Unknown model" msgstr "অপরিচিত মডেল" #: printer/main.pm:354 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "এই মেশিনে কনফিগার করা রয়েছে" #: printer/main.pm:360 printer/printerdrake.pm:1239 #, c-format msgid " on parallel port #%s" msgstr "%s নম্বর প্যারালাল পোর্টে" #: printer/main.pm:363 printer/printerdrake.pm:1242 #, c-format msgid ", USB printer #%s" msgstr ", ইউএসবি প্রিন্টার #%s" #: printer/main.pm:365 #, c-format msgid ", USB printer" msgstr ", ইউএসবি প্রিন্টার" # sam #: printer/main.pm:369 #, c-format msgid ", HP printer on a parallel port" msgstr ", প্যারালাল পোর্টে HP প্রিন্টার" # sam #: printer/main.pm:371 #, c-format msgid ", HP printer on USB" msgstr ", USB পোর্টে HP প্রিন্টার" # sam #: printer/main.pm:373 #, c-format msgid ", HP printer on HP JetDirect" msgstr ", HP JetDirect এ HP প্রিন্টার" # sam #: printer/main.pm:375 #, c-format msgid ", HP printer" msgstr ", HP প্রিন্টার" #: printer/main.pm:381 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", %s নম্বর প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:384 #, c-format msgid ", multi-function device on a parallel port" msgstr ", প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:386 #, c-format msgid ", multi-function device on USB" msgstr ", ইউএসবি-তে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:388 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", HP JetDirect-এ বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:390 #, c-format msgid ", multi-function device" msgstr ", বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:394 #, c-format msgid ", printing to %s" msgstr ", প্রিন্টসমূহ %s-এ" #: printer/main.pm:397 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " \"%s\" LPD সার্ভারে, \"%s\" প্রিন্টার" #: printer/main.pm:400 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", \"%s\" টিসিপি/আই-পি হোস্ট, %s পোর্ট" #: printer/main.pm:405 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " \"%s\" SMB/উইন্ডোজ সার্ভারে, \"%s\" ভাগাভাগি" #: printer/main.pm:410 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " \"%s\" নোভেল সার্ভারে, \"%s\" প্রিন্টার" #: printer/main.pm:413 #, c-format msgid ", using command %s" msgstr ", %s কমান্ড ব্যবহার করছে" #: printer/main.pm:428 #, c-format msgid "Parallel port #%s" msgstr "প্যারালাল পোর্ট #%s" #: printer/main.pm:431 printer/printerdrake.pm:1260 #: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305 #, c-format msgid "USB printer #%s" msgstr "ইউএসবি প্রিন্টার #%s" #: printer/main.pm:433 #, c-format msgid "USB printer" msgstr "ইউএসবি প্রিন্টার" # sam #: printer/main.pm:437 #, c-format msgid "HP printer on a parallel port" msgstr "প্যারালাল পোর্টে HP প্রিন্টার" # sam #: printer/main.pm:439 #, c-format msgid "HP printer on USB" msgstr "USB পোর্টে HP প্রিন্টার" # sam #: printer/main.pm:441 #, c-format msgid "HP printer on HP JetDirect" msgstr "HP JetDirect এ HP প্রিন্টার" # sam #: printer/main.pm:443 #, c-format msgid "HP printer" msgstr "HP প্রিন্টার" #: printer/main.pm:449 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "%s নম্বর প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:452 #, c-format msgid "Multi-function device on a parallel port" msgstr "প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:454 #, c-format msgid "Multi-function device on USB" msgstr "ইউএসবি-তে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:456 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "HP JetDirect-এ বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:458 #, c-format msgid "Multi-function device" msgstr "বিবিধ ক্ষমতা সম্পন্ন ডিভাইস" #: printer/main.pm:462 #, c-format msgid "Prints into %s" msgstr "প্রিন্টসমূহ %s-এ" #: printer/main.pm:465 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "\"%s\" LPD সার্ভার, \"%s\" প্রিন্টার" #: printer/main.pm:468 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "\"%s\" টিসিপি/আই-পি হোস্ট, %s পোর্ট" #: printer/main.pm:473 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "\"%s\" SMB/উইন্ডোজ সার্ভার, \"%s\" ভাগাভাগি" #: printer/main.pm:478 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "\"%s\" নোভেল সার্ভার, \"%s\" প্রিন্টার" #: printer/main.pm:481 #, c-format msgid "Uses command %s" msgstr "ব্যবহারকারীদের কমান্ড %s" #: printer/main.pm:483 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:631 printer/printerdrake.pm:856 #: printer/printerdrake.pm:2953 #, c-format msgid "Raw printer (No driver)" msgstr "Raw প্রিন্টার (কোন ড্রাইভার ছাড়া)" #: printer/main.pm:1181 printer/printerdrake.pm:211 #: printer/printerdrake.pm:223 #, c-format msgid "Local network(s)" msgstr "লোকাল নেটওয়ার্ক(সমূহ)" #: printer/main.pm:1183 printer/printerdrake.pm:227 #, c-format msgid "Interface \"%s\"" msgstr "ইন্টার্ফেস \"%s\"" #: printer/main.pm:1185 #, c-format msgid "Network %s" msgstr "নেটওয়ার্ক %s" #: printer/main.pm:1187 #, c-format msgid "Host %s" msgstr "হোস্ট %s" #: printer/main.pm:1216 #, c-format msgid "%s (Port %s)" msgstr "%s (পোর্ট %s)" # সাম: # self-extracting? # decompress? # = লিপি #: printer/printerdrake.pm:24 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "HP LaserJet ১০০০ চালু করার পর এর ফার্মওয়্যার আপলোড করা প্রয়োজন। HP ওয়েব সাইট " "থেকে উইন্ডোজ ড্রাইভার প্যাকেজটি ডাউনলোড করুন (প্রিন্টারের CD র ফার্মওয়্যারটি অকেজো)। " "ফার্মওয়্যার ফাইলটি বের করতে, self-extracting '.exe' ফাইলটি 'unzip' ইউটিলিটি " "দিয়ে ডিকম্প্রেস করুন এবং 'sihp1000.img' ফাইলটি খুঁজে বের করুন। তারপর এ ফাইলটি '/" "etc/printer' ডিরেক্টরিতে কপি করুন। সেখানে একটি স্বয়ংক্রিয় আপলোডার স্ক্রিপ্ট দ্বারা " "এটি চিহ্নিত হবে এবং আপলোড হয়ে যাবে যখনি প্রিন্টারটি চালু এবং সংযুক্ত করা হয়।\n" #: printer/printerdrake.pm:67 #, c-format msgid "CUPS printer configuration" msgstr "CUPS প্রিন্টার কনফিগারেশন" #: printer/printerdrake.pm:68 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "এখানে এই মেশিনে যুক্ত প্রিন্টারগুলো রিমোট মেশিন কর্তৃক যার মাধ্যমে রিমোট মেশিন কর্তৃক " "ব্যবহার করা যাবে কিনা বেছে নিতে পারেন।" #: printer/printerdrake.pm:69 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "এখানে আপনি সিদ্ধান্ত নিতে পারেন যে রিমোট মেশিনের প্রিন্টারগুলো এই মেশিন থেকে " "স্বয়ংক্রিয়ভাবে পাওয়া যাবে কিনা।" #: printer/printerdrake.pm:72 #, c-format msgid "The printers on this machine are available to other computers" msgstr "এই মেশিনের প্রিন্টারগুলো অন্যান্য কম্পিউটার থেকে পাওয়া যাবে" #: printer/printerdrake.pm:77 #, c-format msgid "Automatically find available printers on remote machines" msgstr "রিমোট মেশিনে প্রাপ্ত প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে খুজে বের করবে" #: printer/printerdrake.pm:82 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "হোস্ট/নেটওয়ার্কে প্রিন্টার ভাগাভাগি: " #: printer/printerdrake.pm:84 #, c-format msgid "Custom configuration" msgstr "হাতে হাতে কনফিগারেশন" #: printer/printerdrake.pm:89 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "দূরবর্তী কোন মেশিন নেই" #: printer/printerdrake.pm:100 #, c-format msgid "Additional CUPS servers: " msgstr "অতিরিক্ত CUPS সার্ভার: " # সাম #: printer/printerdrake.pm:107 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "আপনার স্থানীয় নেটওয়ার্কে অবস্থিত রিমোট CUPS সার্ভারের প্রিন্টারগুলোতে প্রবেশাধিকারের " "জন্য \"রিমোট মেশিনে প্রাপ্ত প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে খুজে বের করবে\" অপশনটি চালু " "করতে হবে; নিজস্ব প্রিন্টারগুলো সম্বন্ধে CUPS সার্ভারগুলো আপনার মেশিনকে স্বয়ংক্রিয়ভাবে " "অবহিত করবে। আপনার মেশিনে বর্তমানে চিহ্নিত সব প্রিন্টার, Printerdrake মূল উইন্ডোর " "\"রিমোট প্রিন্টারসমূহ\" অংশে তালিকাভুক্ত আছে। যদি আপনার CUPS সার্ভার(সমূহ) আপনার " "স্থানীয় নেটওয়ার্কে অবস্থিত না হয়, আপনাকে সার্ভার(সমূহ) থেকে প্রিন্টার সম্পর্কীয় তথ্য " "পেতে হলে IP অ্যাড্রেস এবং চাইলে পোর্ট নাম্বার দিতে হবে।" #: printer/printerdrake.pm:115 #, c-format msgid "Japanese text printing mode" msgstr "জাপানী টেক্সট ছাপানোর মোড" # সাম # accentuate = d ঝোঁক‌-চিহ্ন সম্বলিত #: printer/printerdrake.pm:116 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "এটি চালু করলে আপনি জাপানী ভাষায় সাধারন টেক্সট ফাইল প্রিন্ট করতে পারবেন। এই " "ফাংশানটি শুধুমাত্র জাপানী অক্ষরে টেক্সট প্রিন্ট করতে ব্যবহার করুন, কারন এটি সক্রিয় " "থাকলে আপনি ঝোঁক‌-চিহ্ন সম্বলিত ল্যাটিন অক্ষরসমূহ প্রিন্ট করতে পারবেন না এবং মার্জিন, " "অক্ষরের সাইজ ইত্যাদি বদলাতে পারবেন না। এই সেটিংটি শুধুমাত্র এই মেশিনে কনফিগারকৃত " "প্রিন্টারের ক্ষেত্রে প্রযোজ্য। আপনি যদি একটি রিমেট মেশিনে সেটআপ করা প্রিন্টার দিয়ে " "জাপানী অক্ষর প্রিন্ট করতে চান তবে আপনাকে সেই রিমেট মেশিনে এ ফাংশানটি সক্রিয় করতে " "হবে।" #: printer/printerdrake.pm:123 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "CUPS কন্‌ফিগারেশনে স্বয়ংক্রিয় শুদ্ধতা" #: printer/printerdrake.pm:125 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: printer/printerdrake.pm:138 printer/printerdrake.pm:506 #: printer/printerdrake.pm:4397 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "রিমোট CUPS সার্ভার এবং কোন স্থানীয় CUPS daemon নেই" #: printer/printerdrake.pm:141 #, c-format msgid "On" msgstr "চালু" #: printer/printerdrake.pm:143 printer/printerdrake.pm:498 #: printer/printerdrake.pm:525 #, c-format msgid "Off" msgstr "বন্ধ" # সাম: এই ফাইল এ daemon এর কয়েকটা অনুবাদ: # ডেমন daemon ড্যেমন ডেইমন ডেমন্‌ .... # i am lost! :D # # correct translation of 'print queues'? #: printer/printerdrake.pm:144 printer/printerdrake.pm:507 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" "এই মোডে স্থানীয় CUPS daemon বন্ধ করে দেয়া হবে এবং সব প্রিন্ট অনুরোধ সরাসরি " "নিম্নল্লেখিত সার্ভারে যাবে। দ্রষ্টব্য: এই সময়ে স্থানীয় প্রিন্ট সারি নির্দিষ্ট করার কোন " "ব্যবস্থা নেই এবং যদি উল্লেখিত সার্ভার নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব " "হবে না।" #: printer/printerdrake.pm:161 printer/printerdrake.pm:236 #, c-format msgid "Sharing of local printers" msgstr "লোকাল প্রিন্টারের শেয়ারিং" #: printer/printerdrake.pm:162 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "এই মেশিনগুলোতে এবং নেটওয়ার্কে স্থানীয়ভাবে সংযুক্ত প্রিন্টারনেট" #: printer/printerdrake.pm:173 #, c-format msgid "Add host/network" msgstr "হোস্ট/নেটওয়ার্ক যোগ করো" #: printer/printerdrake.pm:179 #, c-format msgid "Edit selected host/network" msgstr "নির্বাচিত হোস্ট/নেটওয়ার্ক সম্পদনা করেন" #: printer/printerdrake.pm:188 #, c-format msgid "Remove selected host/network" msgstr "নির্বাচিত হোস্ট/নেটওয়ার্ক মুছে ফেলুন" #: printer/printerdrake.pm:219 printer/printerdrake.pm:229 #: printer/printerdrake.pm:241 printer/printerdrake.pm:248 #: printer/printerdrake.pm:279 printer/printerdrake.pm:297 #, c-format msgid "IP address of host/network:" msgstr "হোস্ট/নেটওয়ার্কের IP ঠিকানা" #: printer/printerdrake.pm:237 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "যেখানে স্থানীয় প্রিন্টারগুলো সহজে পাওয়া যায় সেইনেটওয়ার্ক বা হোস্ট বেছে নিন:" #: printer/printerdrake.pm:244 #, c-format msgid "Host/network IP address missing." msgstr "হোস্ট/নেটওয়ার্ক আই-পি অ্যাড্রেস হারিয়ে গেছে।" #: printer/printerdrake.pm:252 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "এখানে দেয়া হোস্ট/নেটওয়ার্ক আই-পি সঠিক নয়।\n" #: printer/printerdrake.pm:253 printer/printerdrake.pm:429 #, c-format msgid "Examples for correct IPs:\n" msgstr "সঠিক IP সমুহের নমুনা:\n" #: printer/printerdrake.pm:277 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "এই হোস্ট/নেটওয়ার্ক ইতিমধ্যেই তালিকায় আছে, পুনরায় যুক্ত করা যাবে না।\n" #: printer/printerdrake.pm:346 printer/printerdrake.pm:416 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "রিমোট CUPS সার্ভার দিয়ে প্রিন্টারে প্রবেশ" #: printer/printerdrake.pm:347 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "আপনি যেই প্রিন্টারটি ব্হব্যবহার করতে চান তা CUPS সার্ভারে যুক্ত করুন। আপনাকে শুধু এটি " "করতে হবে যদি সার্ভার তাদের প্রিন্টারের তথ্য স্থানীয় নেটওয়ার্কে ছড়িয়ে না দেয়।" #: printer/printerdrake.pm:358 #, c-format msgid "Add server" msgstr "সার্ভার যোগ করো" #: printer/printerdrake.pm:364 #, c-format msgid "Edit selected server" msgstr "নির্বাচিত সার্ভারটি সম্পাদিত করো" #: printer/printerdrake.pm:373 #, c-format msgid "Remove selected server" msgstr "নির্বাচিত সার্ভারটি মুছে ফেলো" #: printer/printerdrake.pm:417 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" "যেই সার্ভারের প্রিন্টার আপনি ব্যবহার করতে চান তার IP ঠিকানা এবং পোর্ট প্রবেশ করান।" #: printer/printerdrake.pm:418 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "কোন পোর্ট না দেয়া হলে, স্বাভাবিক ভাবে ৬৩১ ব্যবহার করা হবে।" #: printer/printerdrake.pm:422 #, c-format msgid "Server IP missing!" msgstr "সার্ভারের IP নেই!" #: printer/printerdrake.pm:428 #, c-format msgid "The entered IP is not correct.\n" msgstr "IP টি সঠিক নয়।\n" #: printer/printerdrake.pm:440 printer/printerdrake.pm:1924 #, c-format msgid "The port number should be an integer!" msgstr "পোর্ট নম্বর একটি সংখ্যা হতে হবে!" #: printer/printerdrake.pm:451 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "এই সার্ভারটি ইতিমধ্যেই তালিকায় উপস্হিত, একে আবার যোগ করা যাবে নাহ্।\n" #: printer/printerdrake.pm:462 printer/printerdrake.pm:1951 #: standalone/drakups:251 standalone/harddrake2:52 #, c-format msgid "Port" msgstr "পোর্ট" #: printer/printerdrake.pm:495 printer/printerdrake.pm:511 #: printer/printerdrake.pm:526 printer/printerdrake.pm:530 #: printer/printerdrake.pm:536 #, c-format msgid "On, Name or IP of remote server:" msgstr "দূরবর্তী সার্ভারের নাম অথবা IP" #: printer/printerdrake.pm:514 printer/printerdrake.pm:4406 #: printer/printerdrake.pm:4472 #, c-format msgid "CUPS server name or IP address missing." msgstr "CUPS সার্ভার নাম বা IP অ্যাড্রেস হারিয়ে গেছে।" #: printer/printerdrake.pm:566 printer/printerdrake.pm:586 #: printer/printerdrake.pm:680 printer/printerdrake.pm:746 #: printer/printerdrake.pm:773 printer/printerdrake.pm:832 #: printer/printerdrake.pm:874 printer/printerdrake.pm:884 #: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225 #: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305 #: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374 #: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458 #: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542 #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804 #: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948 #: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656 #: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771 #: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906 #: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079 #: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110 #: printer/printerdrake.pm:4201 printer/printerdrake.pm:4296 #: printer/printerdrake.pm:4302 printer/printerdrake.pm:4326 #: printer/printerdrake.pm:4433 printer/printerdrake.pm:4542 #: printer/printerdrake.pm:4562 printer/printerdrake.pm:4571 #: printer/printerdrake.pm:4586 printer/printerdrake.pm:4784 #: printer/printerdrake.pm:5236 printer/printerdrake.pm:5313 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:567 printer/printerdrake.pm:4008 #: printer/printerdrake.pm:4543 #, c-format msgid "Reading printer data..." msgstr "প্রিন্টার তথ্য পড়া হচ্ছে..." #: printer/printerdrake.pm:587 #, c-format msgid "Restarting CUPS..." msgstr "CUPS পুনরায় আরম্ভ করছি..." #: printer/printerdrake.pm:614 printer/printerdrake.pm:634 #, c-format msgid "Select Printer Connection" msgstr "প্রিন্টারের সংযোগ নির্বাচন করুন" #: printer/printerdrake.pm:615 #, c-format msgid "How is the printer connected?" msgstr "প্রিন্টারটি কিভাবে সংযুক্ত আছে?" #: printer/printerdrake.pm:617 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "রিমোট CUPS সার্ভারের প্রিন্টারগুলো এখানে কন্‌ফিগার করার দরকার নেই; এই প্রিন্টারগুলো " "স্বয়ংক্রিয়ভাবে চিহ্নিত হবে।" #: printer/printerdrake.pm:620 printer/printerdrake.pm:4786 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" "\n" "সাবধানতা: কোন স্থানীয় নেটওয়ার্ক সংযুক্তি সক্রিয় নেই, রিমোট প্রিন্টার চিহ্নিত করা " "হয়নি বা পরীক্ষা করা হয়নি!" #: printer/printerdrake.pm:627 #, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "" "প্রিন্টার স্বয়ংক্রিয়-চিহ্নিত (স্থানীয়, টিসিপি/সকেট, এস-এম-বি প্রিন্টার, এবং যন্ত্রের " "URI)" # সাম #: printer/printerdrake.pm:629 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "নেটওয়ার্ক প্রিন্টার স্বয়ংক্রিয়‌-সনাক্তকরণের টাইমআউট পরিবর্তন কর" # সাম #: printer/printerdrake.pm:635 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "এখানে নেটওয়ার্ক প্রিন্টার স্বয়ংক্রিয়‌-সনাক্তকরণের টাইমআউট (মিলিসেকেন্ডে) দিন।" # সাম #: printer/printerdrake.pm:637 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" "আপনি যত বেশী টাইমআউট দেবেন, নেটওয়ার্ক প্রিন্টার সনাক্তকরণ তত নির্ভরযোগ্য হবে। তবে " "তখন স্ক্যান করতে সময় বেশী লাগবে, বিশেষ করে যদি নেটওয়ার্কে স্থানীয় ফায়ারওয়াল " "সম্বলিত অনেক মেশিন থাকে। " # সাম: # not sure if positive interger = প্রকৃত সংখ্যা...check out #: printer/printerdrake.pm:641 #, c-format msgid "The timeout must be a positive integer number!" msgstr "টাইমআউট একটি ধনাত্মক প্রকৃত সংখ্যা হতে হবে!" #: printer/printerdrake.pm:680 #, c-format msgid "Checking your system..." msgstr "আপনার সিস্টেম নিরীক্ষা করা হচ্ছে..." #: printer/printerdrake.pm:697 #, c-format msgid "and one unknown printer" msgstr "এবং একটি অপরিচিত প্রিন্টার" #: printer/printerdrake.pm:699 #, c-format msgid "and %d unknown printers" msgstr "এবং %d অজানা প্রিন্টারসমূহ" #: printer/printerdrake.pm:703 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "নিম্নলিখিত প্রিন্টারগুলো\n" "\n" "%s%s\n" "আপনার সিস্টেমে সরাসরি সংযুক্ত আছে" #: printer/printerdrake.pm:705 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "নিম্নলিখিত প্রিন্টারটি\n" "\n" "%s%s\n" "আপনার সিস্টেমে সরাসরি সংযুক্ত আছে" #: printer/printerdrake.pm:706 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "নিম্নলিখিত প্রিন্টারটি\n" "\n" "%s%s\n" "আপনার সিস্টেমে সরাসরি সংযুক্ত আছে" #: printer/printerdrake.pm:710 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "আপনার সিস্টেমে সরাসরি যুক্ত একটি অজানা প্রিন্টার আছে" #: printer/printerdrake.pm:711 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "আপনার সিস্টেমে সরাসরি যুক্ত %d টি অজানা প্রিন্টার আছে" #: printer/printerdrake.pm:714 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "আপনার সিস্টেমে সরাসরি যুক্ত কোন প্রিন্টার পাওয়া যায়নি" #: printer/printerdrake.pm:717 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (নিশ্চিত হোন যে আপনার সবগুলো প্রিন্টার সংযুক্ত এবং অন করা আছে)।\n" #: printer/printerdrake.pm:730 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "আপনি কি উপরে দেয়া প্রিন্টারগুলো থেকে অথবা স্থানীয় নেটওয়ার্কের প্রিন্টারগুলোকে " "ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n" #: printer/printerdrake.pm:731 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "আপনি কি স্থানীয় নেটওয়ার্কের প্রিন্টারগুলোকে ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n" #: printer/printerdrake.pm:733 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "আপনি কি উপরে দেয়া প্রিন্টারগুলোকে ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n" #: printer/printerdrake.pm:734 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "আপনি কি নিশ্চিত যে আপনি এই মেশিনে প্রিন্টিং সেটআপ করতে চান?\n" #: printer/printerdrake.pm:735 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "নোট: প্রিন্টার মডেল এবং প্রিন্টিং সিস্টেমের উপর নির্ভর করে %d মেগাবাইট অতিরিক্ত " "সফ্‌টওয়্যার ইনস্টল হবে।" #: printer/printerdrake.pm:774 #, c-format msgid "Searching for new printers..." msgstr "নতুন প্রিন্টার খোঁজা হচ্ছে..." #: printer/printerdrake.pm:833 #, c-format msgid "Found printer on %s..." msgstr "%s এ প্রিন্টার পাওয়া গেছে ..." #: printer/printerdrake.pm:858 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:859 #, c-format msgid " on " msgstr " -এ" #: printer/printerdrake.pm:860 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:865 printer/printerdrake.pm:2960 #, c-format msgid "Printer model selection" msgstr "প্রিন্টার মডেল নির্বাচন" #: printer/printerdrake.pm:866 printer/printerdrake.pm:2961 #, c-format msgid "Which printer model do you have?" msgstr "আপনার কোন প্রিন্টার মডেল আছে?" #: printer/printerdrake.pm:867 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "আপনার %s প্রিন্টারটি কোন মডেলের Printerdrake তা বুঝতে পারছে না। অনুগ্রহ করে " "তালিকা থেকে সঠিক মডেল বেছে নিন।" #: printer/printerdrake.pm:870 printer/printerdrake.pm:2966 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "যদি আপনার প্রিন্টার তালিকায় না থাকে, কাছাকাছি রকমের (প্রিন্টার ম্যানুয়াল দেখুন) " "অথবা একই ধরণের একটি বেছে নিন।" # সাম: প্রিন্টার ? #: printer/printerdrake.pm:875 #, c-format msgid "Configuring printer on %s..." msgstr "%s এ প্রিন্টার কনফিগার করা হচ্ছে..." #: printer/printerdrake.pm:885 printer/printerdrake.pm:4563 #, c-format msgid "Configuring printer \"%s\"..." msgstr "\"%s\" প্রিন্টার কনফিগার করা হচ্ছে..." #: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063 #: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191 #: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:4803 printer/printerdrake.pm:4973 #, c-format msgid "Add a new printer" msgstr "একটি নতুন প্রিন্টার যোগ করো" # সাম #: printer/printerdrake.pm:1052 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n" "\n" "এ উইজার্ড আপনাকে যেকোন স্থানীয় বা দুরবর্তী প্রিন্টার যা কিনা এই মেশিন বা নেটওয়ার্কে " "অবস্থিত অনান্য মেশিনে ব্যবহৃত হবে, তা ইনস্টল করতে সাহায্য করবে।\n" "\n" "উইজার্ডটি আপনাকে প্রিন্টার সেটআপ করতে প্রয়োজনীয় সব তথ্য অনুরোধ করবে এবং আপনাকে " "প্রিন্টার ড্রাইভার, ড্রাইভার অপশনসমূহ এবং প্রিন্টার সংযোগের ধরন, এসব অপশন বেছে " "নেয়ার সুযোগ দেবে।" # সাম #: printer/printerdrake.pm:1065 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n" "\n" "এ উইজার্ডটি আপনার কম্পিউটারে বা সরাসরি নেটওয়ার্কে বা কোন দুরবর্তী উইন্ডোজ মেশিনে " "সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n" "\n" "এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন " "যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে। আপনার নেটওয়ার্ক প্রিন্টার ও উইন্ডোজ " "মেশিনেগুলোও সংযুক্ত ও চালু থাকতে হবে।\n" "\n" "মনে রাখবেন, নেটওয়ার্ক প্রিন্টারগলো সনাক্ত করতে সরাসরি সংযুক্ত প্রিন্টারগলোর চাইতে " "তুলনামূলকভাবে বেশী সময় লাগে। অতএব, যখন প্রয়োজন না হলে নেটওয়ার্ক এবং/অথবা উইন্ডোজ " "হোষ্টকৃত প্রিন্টারগলোর স্বয়ংক্রিয় সনাক্তকরন বন্ধ রাখুন।\n" "\n" " আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন " "প্রিন্টার সেটআপ করতে না চান।" # সাম #: printer/printerdrake.pm:1074 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n" "\n" "এ উইজার্ডটি আপনার কম্পিউটারে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n" "\n" "এই মেশিনে সংযুক্ত সব প্রিন্টার প্লাগ ইন করুন এবং চালু করুন যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত " "হতে পারে।\n" "\n" " আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন " "প্রিন্টার সেটআপ করতে না চান।" # সাম #: printer/printerdrake.pm:1082 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n" "\n" "এ উইজার্ডটি আপনার কম্পিউটারে বা সরাসরি নেটওয়ার্কে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে " "সাহায্য করবে।\n" "\n" "এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন " "যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে। আপনার নেটওয়ার্ক প্রিন্টারগলোও সংযুক্ত ও চালু " "থাকতে হবে।\n" "\n" "মনে রাখবেন, নেটওয়ার্ক প্রিন্টারগলো সনাক্ত করতে সরাসরি সংযুক্ত প্রিন্টারগলোর চাইতে " "তুলনামূলকভাবে বেশী সময় লাগে। অতএব, যখন প্রয়োজন না হলে নেটওয়ার্ক প্রিন্টারগলোর " "স্বয়ংক্রিয় সনাক্তকরন বন্ধ রাখুন।\n" "\n" " আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন " "প্রিন্টার সেটআপ করতে না চান।" # সাম #: printer/printerdrake.pm:1091 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n" "\n" "এ উইজার্ডটি আপনার কম্পিউটারে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n" "\n" "এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন " "যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে।\n" "\n" " আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন " "প্রিন্টার সেটআপ করতে না চান।" #: printer/printerdrake.pm:1142 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "এই মেশিনের সাথে সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো" #: printer/printerdrake.pm:1145 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "লোকাল নেটওয়ার্কের সাথে সরাসরি সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো" #: printer/printerdrake.pm:1148 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "উইন্ডোজ চালিত মেশিনের সাথে সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো" # সাম #: printer/printerdrake.pm:1151 #, c-format msgid "No auto-detection" msgstr "কোন স্বয়ংক্রিয় সনাক্তকরণ নয়" # সাম #: printer/printerdrake.pm:1171 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "অভিনন্দন, আপনার প্রিন্টারের ইনস্টলেশন ও কনফিগারেশন দুটোই শেষ!\n" "\n" "আপনি আপনার অ্যাপ্লিকেশনের \"প্রিন্ট\" কমান্ড দিয়ে প্রিন্ট করতে পারেন (সাধারণত \"ফইল" "\" মেনুতে অবস্থিত)।\n" "\n" "আপনি যদি প্রিন্টার যোগ করতে, সরাতে বা নাম বদলাতে চান, বা যদি ডিফল্ট অপশন " "সেটিংসমূহ (কাগজ দেবার ট্রে, মুদ্রনের মান, ...) বদলাতে চান, তবে তা %s নিয়ন্ত্রণ " "কেন্দ্র \"হার্ডওয়্যার\" বিভাগে \"প্রিন্টার\" থেকে করুন।" #: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592 #: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806 #: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061 #: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079 #: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231 #: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363 #: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465 #, c-format msgid "Could not install the %s packages!" msgstr "%s প্যাকেজগুলি ইনস্টল করা গেলোনা!" #: printer/printerdrake.pm:1209 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "উইন্ডেজ/SMB সার্ভার সয়ং-সনাক্ত উপেক্ষা করা হচ্ছে" #: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360 #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Printer auto-detection" msgstr "প্রিন্টার সংয়-সনাক্তকরণ" #: printer/printerdrake.pm:1215 #, c-format msgid "Detecting devices..." msgstr "ডিভাইস সমূহ সনাক্ত করা হচ্ছে..." #: printer/printerdrake.pm:1245 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", নেটওয়ার্ক প্রিন্টার \"%s\", পোর্ট %s" #: printer/printerdrake.pm:1248 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", এসএমবি/উইন্ডোজ সার্ভার \"%2$s\" এর প্রিন্টার \"%1$s\"" #: printer/printerdrake.pm:1252 #, c-format msgid "Detected %s" msgstr "%s সনাক্ত হয়েছে" #: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284 #: printer/printerdrake.pm:1302 #, c-format msgid "Printer on parallel port #%s" msgstr "প্যারালাল পোর্ট #%s এর প্রিন্টার" #: printer/printerdrake.pm:1263 #, c-format msgid "Network printer \"%s\", port %s" msgstr "নেটওয়ার্ক প্রিন্টার \"%s\", পোর্ট %s" #: printer/printerdrake.pm:1266 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "এসএমবি/উইন্ডোজ সার্ভার \"%2$s\" এর প্রিন্টার \"%1$s\"" #: printer/printerdrake.pm:1347 #, c-format msgid "Local Printer" msgstr "লোকাল প্রিন্টার" # সাম: Parallel Port translated as প্যারালাল পোর্ট at some place. # this string has other occurances: # (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...) #: printer/printerdrake.pm:1348 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "কোন স্থানীয় প্রিন্টার পাওয়া যায়নি! নিজ হাতে ইনস্টল করতে চাইলে ইনপুট লাইনে " "(প্যারালাল পোর্ট: /dev/lp0, /dev/lp1, ..., যা কিনা LPT1:, LPT2:, ..., এর " "সমতুল্য; ১ম ইউএসবি প্রিন্টার: /dev/usb/lp0, ২য় ইউএসবি প্রিন্টার: /dev/usb/" "lp1, ...) ডিভাইস নাম/ফাইল নাম উল্লেখ করুন।" #: printer/printerdrake.pm:1352 #, c-format msgid "You must enter a device or file name!" msgstr "আপনাকে অবশ্যই একটি ডিভাইস অথবা ফাইলের নাম প্রবেশ করাতে হবে!" #: printer/printerdrake.pm:1361 #, c-format msgid "No printer found!" msgstr "কোন প্রিন্টার পাওয়া যায়নি!" #: printer/printerdrake.pm:1369 #, c-format msgid "Local Printers" msgstr "লোকাল প্রিন্টারসমূহ" #: printer/printerdrake.pm:1370 #, c-format msgid "Available printers" msgstr "উপস্থিত প্রিন্টারসমূহ" #: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383 #, c-format msgid "The following printer was auto-detected. " msgstr "নিম্নোক্ত প্রিন্টারগুলি সংয়-সনাক্ত হয়েছে।" #: printer/printerdrake.pm:1376 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "আপনি যেটি কন্‌ফিগার করতে চাচ্ছেন যদি এটা তা না হয়, তাহলে যন্ত্রের নাম/ফাইলের নাম " "ইনপুট লাইনে দিন" #: printer/printerdrake.pm:1377 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "অদলবদলকরে, আপনি ইনপুট লাইনে যন্ত্রের নাম/ফাইলের নাম নির্দিষ্ট করে দিতে পারেন" #: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "এখানে সয়ং-নির্ধারিত প্রিন্টারগুলির একটি লিষ্ট।" #: printer/printerdrake.pm:1380 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "অনুগ্রহ করে যেই প্রিন্টারটি আপনি সেট-আপ করতে চান তা বেছে নিন অথবা ইনপুট লাইনে " "যন্ত্রের নাম/ফাইলের নাম দিন" #: printer/printerdrake.pm:1381 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "অনুগ্রহ করে যেই প্রিন্টারটি আপনি প্রিন্ট করার কাজে ব্যবহার করতে চান তা বেছে নিন " "অথবা ইনপুট লাইনে যন্ত্রের নাম/ফাইলের নাম দিন" # sam: printer # Manual configuration has been translated as "হাতে হাতে কনফিগারেশন" but is it appropriate as an option? # I mean should the option \"Manual configuration\" be translated that way? #: printer/printerdrake.pm:1385 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "প্রিন্টার কনফিগারেশন সম্পূর্ন স্বয়ংক্রীয়ভাবে কাজ করবে। যদি আপনার প্রিন্টারটি সঠিকভাবে " "সনাক্ত না হয় অথবা আপনি যদি নিজ হাতে কনফিগারেশন করতে চান, তাহলে \"স্বনির্বাচিত " "কনফিগারেশন\" চালু করুন। " #: printer/printerdrake.pm:1386 #, c-format msgid "Currently, no alternative possibility is available" msgstr "এখন কোন বিকল্প সম্ভাবনা নেই।" # সাম: printer Manual configuration # there is a similar one... #: printer/printerdrake.pm:1389 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "যে প্রিন্টারটি সেটআপ করতে চান সেটি বাছাই করুন। প্রিন্টার কনফিগারেশন সম্পূর্ন " "স্বয়ংক্রীয়ভাবে কাজ করবে। যদি আপনার প্রিন্টারটি সঠিকভাবে সনাক্ত না হয় অথবা আপনি " "যদি নিজ হাতে কনফিগারেশন করতে চান, তাহলে \"স্বনির্বাচিত কনফিগারেশন\" চালু করুন।" #: printer/printerdrake.pm:1390 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "অনুগ্রহ করে একটি প্রিন্টার পছন্দ করুন যেখানে আপনার প্রিন্টের কাজগুলি যাবে।" #: printer/printerdrake.pm:1392 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "অনুগ্রহ করে যেই পোর্টে আপনার প্রিন্টারটি যুক্ত তা বেছে নিন অথবা ইনপুট লাইনে যন্ত্রের " "নাম/ফাইলের নাম দিন" #: printer/printerdrake.pm:1393 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "আপনার প্রিন্টারটি যে পোর্টে সংযুক্ত আছে তা পছন্দ করুন।" #: printer/printerdrake.pm:1395 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (প্যারালাল পোর্ট: /dev/lp0, /dev/lp1, ..., সদৃশ LPT1:, LPT2:, ..., প্রথম ইউএসবি " "প্রিন্টার: /dev/usb/lp0, দ্বিতীয় ইউএসবি প্রিন্টার: /dev/usb/lp1, ...)।" #: printer/printerdrake.pm:1399 #, c-format msgid "You must choose/enter a printer/device!" msgstr "আপনাকে অবশ্যই একটি প্রিন্টার/ডিভাইস পছন্দ/প্রবেশ করাতে হবে!" #: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502 #: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732 #: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970 #: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072 #: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092 #, c-format msgid "Aborting" msgstr "বের হয়ে যাচ্ছে" #: printer/printerdrake.pm:1475 #, c-format msgid "Remote lpd Printer Options" msgstr "lpd প্রিন্টারের রিমোট অপশন" #: printer/printerdrake.pm:1476 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "দূরবর্তী lpd প্রিন্টার ব্যবহার করতে, আপনাকে সেই সার্ভারে প্রিন্টার সার্ভারের হোস্টনাম " "এবং প্রিন্টারের নাম দিতে হবে।" #: printer/printerdrake.pm:1477 #, c-format msgid "Remote host name" msgstr "দূরবর্তী হোস্টের নাম" #: printer/printerdrake.pm:1478 #, c-format msgid "Remote printer name" msgstr "দূরবর্তী প্রিন্টারের নাম" #: printer/printerdrake.pm:1481 #, c-format msgid "Remote host name missing!" msgstr "দূরবর্তী হোস্টের নাম নেই!" #: printer/printerdrake.pm:1485 #, c-format msgid "Remote printer name missing!" msgstr "দূরবর্তী প্রিন্টারের নাম নেই!" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 standalone/drakTermServ:446 #: standalone/drakTermServ:766 standalone/drakTermServ:782 #: standalone/drakTermServ:1554 standalone/drakTermServ:1563 #: standalone/drakTermServ:1575 standalone/drakbackup:499 #: standalone/drakbackup:605 standalone/drakbackup:640 #: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:258 #, c-format msgid "Information" msgstr "তথ্য" #: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 #: printer/printerdrake.pm:2111 #, c-format msgid "Detected model: %s %s" msgstr "সনাক্তকৃত মডেল: %s %s" #: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855 #, c-format msgid "Scanning network..." msgstr "নেটওয়ার্ক স্ক্যান করা হচ্ছে..." #: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ",সার্ভার \"%2$s\"-এ অবস্থিত প্রিন্টার \"%1$s\"" #: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "সার্ভার \"%2$s\"-এ অবস্থিত প্রিন্টার \"%1$s\"" #: printer/printerdrake.pm:1655 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "এস.এম.বি. (উইন্ডোজ ৯x/এন.টি.) প্রিন্টার সংক্রান্ত অপশন" #: printer/printerdrake.pm:1656 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "এস.এম.বি. প্রিন্টারে প্রিন্ট করতে হলে আপনাকে এস.এম.বি. হোস্ট-নাম (লক্ষ করুন! এই নাম " "টি.সি.পি./আই.পি. হোস্ট-নাম হতে ভিন্ন হতে পারে!) এবং হয়তো প্রিন্ট সার্ভারের আই.পি. " "ঠিকানাও উল্লেখ করতে হবে; পাশাপাশি প্রিন্টারের শেয়ার নাম এবং প্রয়োজন হলে " "ব্যবহারকারীর-নাম, পাসওয়ার্ড ও ওয়ার্কগ্রুপ বিষয়ক তথ্যও প্রদান করতে হবে।" #: printer/printerdrake.pm:1657 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "প্রিন্টারটি যদি স্বয়ংক্রিয়ভাবে সনাক্ত করা হয়ে থাকে, তবে তালিকা থেকে শুধু প্রিন্টারটি " "বেছে নিন ও তারপর ব্যবহারকারীর-নাম, পাসওয়ার্ড, এবং/অথবা প্রয়োজনবোধে ওয়ার্কগ্রুপ যোগ " "করুন।" #: printer/printerdrake.pm:1659 #, c-format msgid "SMB server host" msgstr "এস.এম.বি. সার্ভার হোস্ট" #: printer/printerdrake.pm:1660 #, c-format msgid "SMB server IP" msgstr "এস.এম.বি. সার্ভার আই.পি." #: printer/printerdrake.pm:1661 #, c-format msgid "Share name" msgstr "শেয়ারের নাম" #: printer/printerdrake.pm:1664 #, c-format msgid "Workgroup" msgstr "ওয়ার্কগ্রুপ" #: printer/printerdrake.pm:1666 #, c-format msgid "Auto-detected" msgstr "স্বয়ংক্রিয়ভাবে সনাক্তকৃত" #: printer/printerdrake.pm:1676 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "সার্ভারের নাম অথবা আই.পি. অবশ্যই প্রদান করতে হবে!" #: printer/printerdrake.pm:1680 #, c-format msgid "Samba share name missing!" msgstr "সাম্বা শেয়ারের নাম নেই!" #: printer/printerdrake.pm:1686 #, c-format msgid "SECURITY WARNING!" msgstr "নিরাপত্তাজনিত সতর্কবার্তা" # FIXME #: printer/printerdrake.pm:1687 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "আপনি পাসওয়ার্ড ব্যবহার করে উইন্ডোজ অ্যাকাউন্টে প্রিন্ট ব্যবস্থা স্থাপন করতে যাচ্ছেন। " "সাম্বা ক্লায়েন্ট সফটওয়ারের একটি ত্রুটির কারণে উইন্ডোজ সার্ভারকে যে পাসওয়ার্ড পাঠানো " "হয়, তা কমান্ড লাইন থেকে লিখতে হয়। ফলে \"ps auxwww\" কমান্ড ব্যবহার করে " "সিস্টেমের যে কোন ব্যবহারকারী উক্ত পাসওয়ার্ড দেখতে পারেন।\n" "\n" "আমরা তাই নিম্নোক্ত যে কোন একটি বিকল্প ব্যবস্থা ব্যবহারের পরামর্শ দিচ্ছি (প্রতিটি " "ক্ষেত্রেই আপনাকে নিশ্চিত হতে হবে যে, শুধুমাত্র স্থানীয় নেটওয়ার্কের সাথে যুক্ত " "কম্পিউটারগুলোই কেবল উইন্ডোজ সার্ভারকে ব্যবহার করতে পারে, উদাহরণস্বরূপ, ফায়ারওয়াল " "ব্যবহার করে আপনি এটি করতে পারেন):\n" "\n" "\"GUEST\" অ্যাকাউন্টের মত উইন্ডোজ সার্ভারে পাসওয়ার্ড-বিহীন একটি অ্যাকাউন্ট ব্যবহার " "করুন কিংবা প্রিন্টিং এর জন্য একটি বিশেষ অ্যাকাউন্ট রাখুন। ব্যক্তিগত অ্যাকাউন্ট বা " "অ্যাডমিনিস্ট্রেটর অ্যাকাউন্টের পাসওয়ার্ড অপসারণ করবেন না।\n" "\n" "আপনার উইন্ডোজ সার্ভারকে এল.পি.ডি. প্রোটোকল ব্যবহারের জন্য প্রস্তুত রাখুন। এরপর \"%s" "\" সংযোগের ধরন সহ প্রিন্টড্রেক ব্যবহার করে এই কম্পিউটার থেকেই প্রিন্টিং ব্যবস্থা " "স্থাপন করুন।\n" #: printer/printerdrake.pm:1697 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "IPP প্রোটোকলের নিয়ন্ত্রণে প্রিন্টারকে পাওয়ার জন্য আপনার উইন্ডোজ সার্ভার সেট-আপ করুন " "এবং এই মেশিন থেকে Printerdrake এ \"%s\" সংযুক্তি ধরণ থেকে প্রিন্টিং সেট-আপ করুন।\n" "\n" #: printer/printerdrake.pm:1700 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "প্রিন্টারটিকে একটি লিনাক্স সার্ভারের সাথে সংযুক্ত করুন এবং আপনার উইন্ডোজ চালিত " "কম্পিউটারগুলোকে উক্ত সার্ভারের সাথে ক্লায়েন্ট হিসেবে যুক্ত হতে দিন।\n" "\n" "এখন যে ভাবে করছেন, সেভাবেই কি আপনি প্রিন্টারটির সেট-আপ প্রক্রিয়া চালিয়ে যেতে চান?" #: printer/printerdrake.pm:1779 #, c-format msgid "NetWare Printer Options" msgstr "নেটওয়ার প্রিন্টার অপশন" # সাম: 'user name' is wrongly translated at many places as 'ইউজার নেম'। # should be 'ব্যবহারকারীর নাম' # TCP/IP? #: printer/printerdrake.pm:1780 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "NetWare প্রিন্টারটি ব্যবহার করার জন্য আপনাকে NetWare প্রিন্ট সার্ভারের নাম সরবরাহ " "করতে হবে। (লক্ষ করুন! এই নাম টিসিপি/আইপি হোস্ট নাম থেকে ভিন্ন হতে পারে!) আপনাকে " "আরও উল্লেখ করতে হবে ব্যবহৃত প্রিন্টারটির অপেক্ষমান প্রিন্ট তালিকার নাম ও প্রয়োজন হলে " "ব্যবহারকারীর নাম ও পাসওয়ার্ড।" #: printer/printerdrake.pm:1781 #, c-format msgid "Printer Server" msgstr "প্রিন্টার সার্ভার" #: printer/printerdrake.pm:1782 #, c-format msgid "Print Queue Name" msgstr "অপেক্ষমান প্রিন্ট তালিকার (Queue) নাম" #: printer/printerdrake.pm:1787 #, c-format msgid "NCP server name missing!" msgstr "এন.সি.পি. সার্ভারের নাম নেই!" # FIXME #: printer/printerdrake.pm:1791 #, c-format msgid "NCP queue name missing!" msgstr "এন.সি.পি. অপেক্ষমান প্রিন্ট তালিকার (Queue) নাম নেই!" #: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888 #, c-format msgid ", host \"%s\", port %s" msgstr ", হোস্ট \"%s\", পোর্ট %s" #: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891 #, c-format msgid "Host \"%s\", port %s" msgstr "হোস্ট \"%s\", পোর্ট %s" #: printer/printerdrake.pm:1913 #, c-format msgid "TCP/Socket Printer Options" msgstr "টি.সি.পি./সকেট প্রিন্টার অপশন" #: printer/printerdrake.pm:1915 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "তালিকা থেকে স্বয়ংক্রিয়ভাবে চিহ্নিত প্রিন্টারগুলো থেকে একটি বেছে নিন অথবা ইনপুট " "ফিল্ডে হোস্টনাম বা আই-পি এবং ঐচ্ছিক পোর্ট সংখ্যা (ডিফল্ট হচ্ছে 9100) দিন।" # sam: TCP = টিসিপি নাকি TCP? # check throughout the file. # in the commonwords.po hardware translation spelling is wrong. #: printer/printerdrake.pm:1916 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "TCP বা সকেট প্রিন্টারে প্রিন্ট করতে চাইলে আপনাকে হোস্টের নাম অথবা প্রিন্টারের IP " "এবং চাইলে পোর্ট নাম্বার (ডিফল্ট 9100) উল্লেখ করতে হবে। HP JetDirect সার্ভারগুলোতে " "পোর্ট নাম্বার সাধারনত 9100, অনান্য সার্ভারে এটি ভিন্ন হতে পারে। আপনার হার্ডওয়্যার " "সহায়িকা দেখুন।" #: printer/printerdrake.pm:1920 #, c-format msgid "Printer host name or IP missing!" msgstr "প্রিন্টারের হোস্ট-নাম বা আই-পি নেই!" #: printer/printerdrake.pm:1949 #, c-format msgid "Printer host name or IP" msgstr "প্রিন্টারের হোস্ট-নাম বা আই-পি" #: printer/printerdrake.pm:2012 #, c-format msgid "Refreshing Device URI list..." msgstr "ডিভাইস URI তালিকা পুনরায় তৈরি করা হচ্ছে..." #: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017 #, c-format msgid "Printer Device URI" msgstr "প্রিন্টারের URI" # সাম: চেক URI #: printer/printerdrake.pm:2016 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "প্রিন্টার ব্যবহার করার জন্য আপনি সরাসরি URI টি বলে দিতে পারেন। URI টি অবশ্যই CUPS " "অথবা Foomatic এর সুনির্দিষ্ট বিবরণ অনুযায়ী হতে হবে। মনে রাখবেন, সব স্পুলার কিন্তু " "সবধরনের URI সমর্থন করে না।" #: printer/printerdrake.pm:2042 #, c-format msgid "A valid URI must be entered!" msgstr "একটি বৈধ ইউ.আর.আই. লিখতে হবে!" # FIXME #: printer/printerdrake.pm:2147 #, c-format msgid "Pipe into command" msgstr "পাইপ তথ্য কমান্ড" # সাম: pipe = ? # প্রেরিত হবে নাকি অপেক্ষা করবে #: printer/printerdrake.pm:2148 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "এখানে আপনি যেকোন একটি কমান্ড লাইন নির্দিষ্ট করে দিতে পারেন। প্রিন্টিং এর কাজগুলো " "তখন সরাসরি কোন প্রিন্টারের বদলে এই কমান্ড লাইন দিয়ে প্রেরিত হবে।" #: printer/printerdrake.pm:2149 #, c-format msgid "Command line" msgstr "কমান্ড লাইন" #: printer/printerdrake.pm:2153 #, c-format msgid "A command line must be entered!" msgstr "একটি কমান্ড লাইন অবশ্যই লিখতে হবে!" # সাম # please check... not sure #: printer/printerdrake.pm:2192 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" "অনেক HP প্রিন্টারে বিশেষ কিছু ফাংশান আছে, রক্ষণাবেক্ষন (কালির পরিমান নিরীক্ষন, নজল " "পরিস্কার করা, হেড একরেখীকরন, ...) খুব বেশী পুরনো না হলে, মাল্টি-ফাংশান ডিভাইসে " "স্ক্যানিং এবং কার্ড রিডার সম্বলিত প্রিন্টারে মেমরী কার্ড ব্যবহার। " # সাম #: printer/printerdrake.pm:2194 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" "আপনার HP প্রিন্টারের বাড়তি ফাংশানগুলো ব্যবহার করতে চাইলে, যথাযথ সফ্টওয়্যার দিয়ে " "সেটআপ করুন: " # সাম: incomplete # \"Toolbox\" # four-edge? # full-bleed? #: printer/printerdrake.pm:2195 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" "হয় নতুন HPLIP দিয়ে যাতে আপনি সহজে ব্যবহারযোগ্য গ্রাফিক্যাল অ্যাপ্লিকেশন \"Toolbox\" " "এর সাহায্যে প্রিন্টার রক্ষণাবেক্ষন করতে পারেন এবং নতুন PhotoSmart মডেলে four-edge " "full-bleed" # সাম #: printer/printerdrake.pm:2196 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" "অথবা পুরনো HPOJ দিয়ে যাতে আপনি শুধু স্ক্যানার বা মেমরী কার্ড ব্যবহার করতে পারেন, " "তবে HPLIP কাজ না করলে এটি আপনাকে সাহায্য করতে পারে। " # সাম #: printer/printerdrake.pm:2198 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "আপনার পচ্ছন্দ কি (HP না এমন প্রিন্টারের জন্য \"একটিও না\" বাছাই করুন)?" # sam #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200 #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232 #: printer/printerdrake.pm:2258 #, c-format msgid "HPLIP" msgstr "HPLIP" # সাম #: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202 #: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364 #: printer/printerdrake.pm:2375 #, c-format msgid "HPOJ" msgstr "HPOJ" # সাম #: printer/printerdrake.pm:2207 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "আপনার প্রিন্টারটি কি HP বা Sony মাল্টি-ফাংশন ডিভাইস (OfficeJet, PSC, LaserJet " "1100/1200/1220/3000/3200/3300/4345 স্ক্যানারসহ, DeskJet 450, Sony IJP-V100), " "একটি HP PhotoSmart বা একটি HP LaserJet 2200?" #: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358 #, c-format msgid "Installing %s package..." msgstr "%s প্যাকেজ ইনস্টল করা হচ্ছে..." # FIXME #: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365 #, c-format msgid "Only printing will be possible on the %s." msgstr "%s-এর ওপর শুধুমাত্র প্রিন্ট চালানো যাবে।" # সাম #: printer/printerdrake.pm:2248 #, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "আপনার পুরনো HPOJ কনফিগারেশন ফাইল %s আপনার %s এর জন্য সরানো যাচ্ছে না! " # সাম #: printer/printerdrake.pm:2250 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "অনুগ্রহ করে আপনি ফইলটি সরিয়ে ফেলুন এবং HPOJ পুনরায় চালু করুন।" #: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375 #, c-format msgid "Checking device and configuring %s..." msgstr "ডিভাইস পরীক্ষা করা হচ্ছে ও %s কনফিগার করা হচ্ছে..." # সাম #: printer/printerdrake.pm:2277 #, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "HPLIP দিয়ে আপনি কোন প্রিন্টার সেট আপ করতে চান?" #: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419 #, c-format msgid "Installing SANE packages..." msgstr "SANE প্যাকেজ ইনস্টল করা হচ্ছে..." #: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432 #, c-format msgid "Scanning on the %s will not be possible." msgstr "%s-কে স্ক্যান করা সম্ভব হবে না।" # সাম #: printer/printerdrake.pm:2334 #, c-format msgid "Using and Maintaining your %s" msgstr "আপনার %s এর ব্যবহার ও রক্ষণাবেক্ষন" #: printer/printerdrake.pm:2459 #, c-format msgid "Installing mtools packages..." msgstr "mtools প্যাকেজ ইনস্টল করা হচ্ছে..." #: printer/printerdrake.pm:2467 #, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "%s থেকে ফটো মেমরি কার্ড ব্যবহার করা সম্ভব হবে না।" #: printer/printerdrake.pm:2483 #, c-format msgid "Scanning on your HP multi-function device" msgstr "আপনার HP মাল্টি-ফাংশন ডিভাইস স্ক্যান করা হচ্ছে" # FIXME #: printer/printerdrake.pm:2492 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "আপনার HP মাল্টি-ফাংশন ডিভাইস থেকে ফটো মেমরি কার্ড ব্যবহার" # সাম #: printer/printerdrake.pm:2509 #, c-format msgid "Configuring device..." msgstr "ডিভাইস কন্‌ফিগার হচ্ছে..." #: printer/printerdrake.pm:2543 #, c-format msgid "Making printer port available for CUPS..." msgstr "আপনার কম্পিউটারের প্রিন্টার পোর্টকে CUPS-এর ব্যবহারোপযোগী করে তোলা..." #: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805 #: printer/printerdrake.pm:2949 #, c-format msgid "Reading printer database..." msgstr "প্রিন্টার ডেটাবেস পড়া হচ্ছে..." #: printer/printerdrake.pm:2763 #, c-format msgid "Enter Printer Name and Comments" msgstr "প্রিন্টারের নাম ও সংশ্লিষ্ট মন্তব্য লিখুন" #: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "প্রিন্টারের নামে শুধু বর্ণমালা, সংখ্যা এবং আন্ডারস্কোর থাকে" #: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "\"%s\" প্রিন্টারটি ইতিমধ্যেই বিদ্যমান,\n" "আপনি কি আসলেই এটির পুরনো কনফিগারেশনের ওপর দিয়ে লিখতে চান?" # সাম #: printer/printerdrake.pm:2780 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" "\"%s\" প্রিন্টারটির নামে ১২ অক্ষরের বেশী আছে যা কিনা এটিকে উইন্ডোজ ক্লায়েন্ট থেকে " "অব্যবহারযোগ্য করে দিতে পারে। আপনি কি তবুও এই নামটি ব্যবহার করতে চান?" #: printer/printerdrake.pm:2789 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "প্রত্যেক প্রিন্টারের একটি নাম প্রয়োজন (যেমন \"printer\")। বিবরণ এবং অবস্থানের " "ক্ষেত্র ভরাট করার প্রয়োজন নেই। সেগুলো ব্যবহারকারীদের জন্য মন্তব্যস্বরুপ।" #: printer/printerdrake.pm:2790 #, c-format msgid "Name of printer" msgstr "প্রিন্টারের নাম" #: printer/printerdrake.pm:2791 standalone/drakconnect:592 #: standalone/harddrake2:39 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "বর্ণনা" #: printer/printerdrake.pm:2792 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "অবস্থান" #: printer/printerdrake.pm:2810 #, c-format msgid "Preparing printer database..." msgstr "প্রিন্টার ডেটাবেস প্রস্তুত করা হচ্ছে..." #: printer/printerdrake.pm:2927 #, c-format msgid "Your printer model" msgstr "আপনার প্রিন্টারের মডেল" #: printer/printerdrake.pm:2928 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936 #, c-format msgid "The model is correct" msgstr "মডেলটি সঠিক" #: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935 #: printer/printerdrake.pm:2938 #, c-format msgid "Select model manually" msgstr "নিজ হাতে মডেল নির্বাচন করুন" # সাম: auto-detection = স্বয়ংক্রিয়‌-সনাক্তকরণ? # check other translations #: printer/printerdrake.pm:2962 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "অনুগ্রহ করে দেখুন Printerdrake আপনার প্রিন্টারটির মডেল স্বয়ংক্রিয়‌-সনাক্তকরণ পদ্ধতিতে " "সঠিকভাবে নির্নয় করেছে কিনা। যদি নির্নয় ভুল হয়ে থাকে বা \"Raw প্রিন্টার\" হিসেবে " "চিহ্নিত হয়, তাহলে তালিকা থেকে সঠিক মডেল বেছে নিন।" #: printer/printerdrake.pm:2981 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "প্রস্তুতকারক কর্তৃক সরবরাহকৃত একটি PPD ফাইল ইনস্টল করুন" #: printer/printerdrake.pm:3013 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" "প্রতিটি পোস্টস্ক্রিপ্ট প্রিন্টারের একটি PPD ফাইল সরবরাহ করা হয় যা প্রিন্টারের বিভিন্ন " "অপশন ও বৈশিষ্ট্যের বিবরণ দেয়।" #: printer/printerdrake.pm:3014 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" "এই ফাইলটি সাধারণত প্রিন্টারের সাথে সরবরাহকৃত সিডি'তে উইন্ডোজ ও ম্যাক-এর ড্রাইভারের " "সাথে থাকে।" #: printer/printerdrake.pm:3015 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "এছাড়াও আপনি প্রিন্টার প্রস্তুতকারকের ওয়েবসাইটে PPD ফাইলটি খুঁজে পেতে পারেন।" #: printer/printerdrake.pm:3016 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" "আপনার কম্পিউটারে উইন্ডোজ ইনস্টল করা থাকলে, উইন্ডোজ-এর ব্যবহৃত পার্টিশনেও PPD ফাইলটি " "খুঁজে পেতে পারেন।" #: printer/printerdrake.pm:3017 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" "প্রিন্টারের PPD ফাইলটি ইনস্টল করা হলে ও প্রিন্টার সেট-আপ এর সময় তা ব্যবহার করা হলে " "প্রিন্টারের হার্ডওয়ার কর্তৃক সরবরাহকৃত প্রতিটি অপশনই ব্যবহার করা যায়।" #: printer/printerdrake.pm:3018 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" "আপনার কম্পিউটারে যে PPD ফাইলটি ইনস্টল করা হবে এখান থেকে আপনি তা নির্বাচন করতে " "পারবেন; পরবর্তী সময়ে এই ফাইলটি প্রিন্টার সেট-আপ করায় ব্যবহৃত হবে।" #: printer/printerdrake.pm:3020 #, c-format msgid "Install PPD file from" msgstr "যেখানে থেকে PPD ফাইলটি ইনস্টল করা হচ্ছে" #: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, c-format msgid "Floppy Disk" msgstr "ফ্লপি ডিস্ক" #: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, c-format msgid "Other place" msgstr "অন্যান্য স্থান" #: printer/printerdrake.pm:3039 #, c-format msgid "Select PPD file" msgstr "PPD ফাইল নির্বাচন করুন" #: printer/printerdrake.pm:3043 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "PPD ফাইল %s-এর কোন অস্তিত্ব নেই অথবা এটি পড়া যাচ্ছে না!" #: printer/printerdrake.pm:3049 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "PPD ফাইল %s PPD'র বর্ণনার (Specification) সাথে মিলছে না!" #: printer/printerdrake.pm:3060 #, c-format msgid "Installing PPD file..." msgstr "PPD ফাইল ইনস্টল করা হচ্ছে..." #: printer/printerdrake.pm:3178 #, c-format msgid "OKI winprinter configuration" msgstr "OKI উইন-প্রিন্টার কনফিগারেশন" # সাম #: printer/printerdrake.pm:3179 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "আপনি একটি OKI লেজার উইন-প্রিন্টার কনফিগারেশন করছেন। এই প্রিন্টারগুলো\n" "একটি বিশেষ যোগাযোগ প্রোটকল ব্যবহার করে বিধায় শুধুমাত্র প্রথম প্যারালাল পোর্টে সংযুক্ত " "অবস্থায় কাজ করতে পারে। আপনার প্রিন্টার যখন অন্য পোর্টে বা প্রিন্টার সার্ভার বক্সে " "সংযুক্ত থাকে, পরীক্ষামূলক পৃষ্ঠা প্রিন্ট করার আগে তা প্রথম প্যারালাল পোর্টে সংযুক্ত করে " "নিন। অন্যথায় প্রিন্টারটি কাজ করবে না। আপনার সংযোগের ধরন নির্ধারনী সেটিংসমূহ " "ড্রাইভারটি অগ্রাহ্য করবে।" #: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234 #, c-format msgid "Lexmark inkjet configuration" msgstr "লেক্সমার্ক ইঙ্কজেট কনফিগারেশন" # সাম: boxes = বাক্স? :s #: printer/printerdrake.pm:3205 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "লেক্সমার্ক সরবরাহকৃত ইঙ্কজেট প্রিন্টার ড্রাইভার শুধুমাত্র স্থানীয় প্রিন্টারগুলো সমর্থন করে, " "কোন রিমোট প্রিন্টার বা প্রিন্ট সার্ভার নয়। অনুগ্রহ করে আপনার প্রিন্টারটি স্থানীয় " "পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি সংযুক্ত, সেই মেশিনে কনফিগার করুন।" # সাম : # intercative translated as # ইন্টারঅ্যাকটিভ # frontend = ফ্রন্টএন্ড? # printhead alignment = প্রিন্টহেড একরেখীকরন #: printer/printerdrake.pm:3235 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "আপনার Lexmark ইঙ্কজেট ও এই কনফিগারেশন দিয়ে প্রিন্ট করার জন্য, আপনার দরকার " "Lexmark (http://www.lexmark.com/) সরবরাহকৃত ইঙ্কজেট প্রিন্টার ড্রাইভারসমূহ। " "\"Drivers\" লিঙ্কটিতে ক্লিক করুন। অতপর: আপনার মডেল নির্বাচন করুন ও অপারেটিং " "সিস্টেম হিসেবে \"Linux\" বেছে নিন। ড্রাইভারগুলো RPM প্যাকেজ অথবা shell স্ক্রিপ্ট " "হিসেবে ইন্টারঅ্যাকটিভ গ্রাফিক্যাল ইনস্টলেশন সহ সরবরাহ করা হয়। গ্রাফিক্যাল ফ্রন্টএন্ড " "দিয়ে কনফিগারেশন করার প্রয়োজন নেই। লইসেন্স চুক্তি পর সরাসরি বাতিল করে দিন। তারপর " "\"lexmarkmaintain\" দিয়ে প্রিন্টহেড একরেখীকরন পৃষ্ঠা প্রিন্ট করুন এবং এই প্রোগ্রাম " "দিয়ে হেড একরেখীকরন সেটিং ঠিক করুন।" #: printer/printerdrake.pm:3245 #, c-format msgid "Lexmark X125 configuration" msgstr "লেক্সমার্ক X125 কনফিগারেশন" # সাম: boxes = বাক্স? #: printer/printerdrake.pm:3246 #, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "এ প্রিন্টারের ড্রাইভার শুধুমাত্র ইউএসবি দ্বারা সংযুক্ত স্থানীয় প্রিন্টার সমর্থন করে, কোন " "রিমোট প্রিন্টার বা প্রিন্ট সার্ভার নয়। অনুগ্রহ করে আপনার প্রিন্টারটি স্থানীয় ইউএসবি " "পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি সংযুক্ত, সেই মেশিনে কনফিগার করুন।" # সাম #: printer/printerdrake.pm:3268 #, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Samsung ML/QL-85G কনফিগারেশন" #: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296 #, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" "এ প্রিন্টারের ড্রাইভার শুধুমাত্র প্রথম প্যারালাল পোর্ট দ্বারা সংযুক্ত স্থানীয় প্রিন্টার " "সমর্থন করে, কোন রিমোট প্রিন্টার, প্রিন্ট সার্ভার বা অন্য প্যারালাল পোর্ট নয়। অনুগ্রহ " "করে আপনার প্রিন্টারটি প্রথম প্যারালাল পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি " "সংযুক্ত, সেই মেশিনে কনফিগার করুন।" # সাম #: printer/printerdrake.pm:3295 #, c-format msgid "Canon LBP-460/660 configuration" msgstr "Canon LBP-460/660 কনফিগারেশন" #: printer/printerdrake.pm:3314 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "HP লেসারজেট ১০০০-এর ফার্মওয়ার-আপলোড" # সাম # resolution = ? #: printer/printerdrake.pm:3464 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "প্রিন্টার ডিফল্ট মানসমূহ\n" "\n" "আপনাকে নিশ্চিত করতে হবে যে লেজার প্রিন্টারের পৃষ্ঠা সাইজ, কালির ধরন/প্রিন্টিং মোড " "(যদি থাকে) এবং হার্ডওয়্যার কনফিগারেশন সঠিকভাবে সেট করা হয়েছে। মনে রাখবেন মান/" "রেজুলেশন বাড়ানোর সাথে সাথে প্রিন্টিং এর গতি কমতে থাকে।" #: printer/printerdrake.pm:3589 #, c-format msgid "Printer default settings" msgstr "প্রিন্টারের ডিফল্ট বৈশিষ্ট্য" #: printer/printerdrake.pm:3596 #, c-format msgid "Option %s must be an integer number!" msgstr "অপশন %s-কে অবশ্যই একটি পূর্ণসংখ্যা হতে হবে!" #: printer/printerdrake.pm:3600 #, c-format msgid "Option %s must be a number!" msgstr "অপশন %s-কে অবশ্যই একটি সংখ্যা হতে হবে!" #: printer/printerdrake.pm:3604 #, c-format msgid "Option %s out of range!" msgstr "অপশন %s সীমা বহির্ভূত!" #: printer/printerdrake.pm:3656 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "আপনি কি এই প্রিন্টারটিকে (\"%s\")\n" "ডিফল্ট প্রিন্টাররূপে নির্দিষ্ট করতে চান?" #: printer/printerdrake.pm:3672 #, c-format msgid "Test pages" msgstr "পরীক্ষামূলক পৃষ্ঠা" # সাম #: printer/printerdrake.pm:3673 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "অনুগ্রহ করে প্রিন্টিং এর জন্য পরীক্ষামূলক পৃষ্ঠা বেছে নিন।\n" "দ্রষ্টব্য: ছবি সম্বলিত পরীক্ষামূলক পৃষ্ঠা অনেক ধীরে প্রিন্ট হয় এবং কম মেমরি সম্পন্ন " "লেজার প্রিন্টারে তা প্রিন্ট নাও হতে পারে। বেশিরভাগ ক্ষেত্রে সাধারণ পরীক্ষামূলক " "পৃষ্ঠাটিই যথেষ্ট।" #: printer/printerdrake.pm:3677 #, c-format msgid "No test pages" msgstr "কোন পরীক্ষামূলক পৃষ্ঠা নেই" #: printer/printerdrake.pm:3678 #, c-format msgid "Print" msgstr "প্রিন্ট" #: printer/printerdrake.pm:3703 #, c-format msgid "Standard test page" msgstr "সাধারণ (Standard) পরীক্ষামূলক পৃষ্ঠা" #: printer/printerdrake.pm:3706 #, c-format msgid "Alternative test page (Letter)" msgstr "বিকল্প পরীক্ষামূলক পৃষ্ঠা (লেটার)" #: printer/printerdrake.pm:3709 #, c-format msgid "Alternative test page (A4)" msgstr "বিকল্প পরীক্ষামূলক পৃষ্ঠা (A4)" #: printer/printerdrake.pm:3711 #, c-format msgid "Photo test page" msgstr "পরীক্ষামূলক ফটো পৃষ্ঠা" #: printer/printerdrake.pm:3715 #, c-format msgid "Do not print any test page" msgstr "কোন পরীক্ষামূলক পৃষ্ঠা ছাপাবে না" #: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907 #, c-format msgid "Printing test page(s)..." msgstr "পরীক্ষামূলক পৃষ্ঠা(সমূহ) ছাপানো হচ্ছে..." #: printer/printerdrake.pm:3743 #, c-format msgid "Skipping photo test page." msgstr "পরীক্ষামূলক ফটো পৃষ্ঠা এড়িয়ে যাওয়া হচ্ছে।" #: printer/printerdrake.pm:3760 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "প্রিন্টারের নিকট পরীক্ষামূলক পৃষ্ঠা(সমূহ) পাঠানো হয়েছে।\n" "প্রিন্টার সচল হওয়ার জন্য কিছু সময় লাগতে পারে।\n" "প্রিন্টিং এর অবস্থা:\n" "%s\n" "\n" #: printer/printerdrake.pm:3764 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "প্রিন্টারের নিকট পরীক্ষামূলক পৃষ্ঠা(সমূহ) পাঠানো হয়েছে।\n" "প্রিন্টার সচল হওয়ার জন্য কিছু সময় লাগতে পারে।\n" #: printer/printerdrake.pm:3774 #, c-format msgid "Did it work properly?" msgstr "এটা কি সঠিকভাবে কাজ করেছে?" #: printer/printerdrake.pm:3798 printer/printerdrake.pm:5175 #, c-format msgid "Raw printer" msgstr "Raw প্রিন্টার" # সাম #: printer/printerdrake.pm:3836 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s \" কমান্ডটি " "অথবা কোন গ্রাফিকাল প্রিন্টিং টুল: \"xpp \" or \"kprinter \" ব্যবহার " "করুন। গ্রাফিকাল টুলগুলো দিয়ে আপনি সহজেই প্রিন্টার বেছে নিতে ও তার অপশনগুলো বদলাতে " "পারবেন।\n" # সাম #: printer/printerdrake.pm:3838 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "এই কমান্ডগুলো আপনি অনেক অ্যাপ্লিকেশনের প্রিন্ট ডায়ালগের \"প্রিন্টিং কমান্ড\" ক্ষেত্রে " "ব্যবহার করতে পারেন, কিন্তু এখানে ফাইল নাম উল্লেখ করবেন না কারন তা অ্যাপ্লিকেশন " "থেকে সরবরাহ করা হয়।\n" # সাম #: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858 #: printer/printerdrake.pm:3868 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "\"%s\" কমান্ডটি একটি প্রিন্টিং কাজের অপশন সেটিং পরিবর্তন করার জন্যেও ব্যবহৃত হয়। " "ইচ্ছানুযায়ী আপনার সেটিংগুলো কমান্ড লাইনে লিখুন, যেমন \"%s <ফাইল>\"।" # সাম: current = বর্তমান? # Print option list #: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "বর্তমান প্রিন্টারের অপশনসমূহ জানতে নিম্নলিখিত তালিকাটি পড়ুন অথবা \"প্রিন্ট অপশনের " "তালিকা\" বাটন ক্লিক করুন।%s%s%s\n" "\n" #: printer/printerdrake.pm:3848 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "এখানে বর্তমান প্রিন্টারের জন্য একটি সহজলভ্য প্রিন্টিং অপশনের তালিকা:\n" "\n" #: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s \" কমান্ডটি " "ব্যবহার করুন।\n" # সাম #: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865 #: printer/printerdrake.pm:3875 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "এই কমান্ড আপনি অনেক অ্যাপ্লিকেশনের প্রিন্ট ডায়ালগের \"প্রিন্টিং কমান্ড\" ক্ষেত্রে " "ব্যবহার করতে পারেন, কিন্তু এখানে ফাইল নাম উল্লেখ করবেন না কারন তা অ্যাপ্লিকেশন " "থেকে সরবরাহ করা হয়।\n" # সাম: current = বর্তমান? #: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "বর্তমান প্রিন্টারের অপশনসমূহ জানতে \"প্রিন্ট অপশনের তালিকা\" বাটন ক্লিক করুন।" #: printer/printerdrake.pm:3873 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s \" অথবা \"%" "s \" কমান্ডটি ব্যবহার করুন।\n" # সাম # panic button = জরুরী বাটন? # immediately = # ত‍‍তক্ষনাত বানান করতে পারি নাই। #: printer/printerdrake.pm:3877 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "অপশন সেটিং এবং প্রিন্টিং কাজ ব্যবস্থাপনায় আপনি \"xpdq\" গ্রাফিক্যাল ইন্টারফেসটিও " "ব্যবহার করতে পারেন।\n" "আপনি যদি ডেস্কটপ পরিবেশ হিসেবে KDE ব্যবহার করেন, তবে এতে একটি \"জরুরী বাটন\" " "থাকবে, একটি \"STOP Printer!\" নামের আইকন, যা ক্লিক করে সব প্রিন্টিং এর কাজ " "ত‍‍তক্ষনাত বন্ধ করা যাবে। ধরুন এটি ব্যবহার হবে প্রিন্টারে পৃষ্ঠা আটকিয়ে গেলে।\n" # সাম #: printer/printerdrake.pm:3881 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "\"%s\" এবং \"%s\" কমান্ডগুলো একটি প্রিন্টিং কাজের অপশন সেটিং পরিবর্তন করার জন্যেও " "ব্যবহৃত হয়। ইচ্ছানুযায়ী আপনার সেটিংগুলো কমান্ড লাইনে লিখুন, যেমন \"%s <ফাইল>\"।\n" # FIXME #: printer/printerdrake.pm:3891 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "\"%s\" এ মুদ্রিত হচ্ছে/স্ক্যান করছে/ফটো কার্ড" #: printer/printerdrake.pm:3892 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "\"%s\" এ মুদ্রিত হচ্ছে/স্ক্যান করছে" # সাম #: printer/printerdrake.pm:3894 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "\"%s\" এ প্রিন্টিং/ফোটো কার্ড এক্সেস" # সাম #: printer/printerdrake.pm:3896 #, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "প্রিন্টার \"%s\" ব্যবহার/রক্ষণাবেক্ষন করা হচ্ছে" #: printer/printerdrake.pm:3897 #, c-format msgid "Printing on the printer \"%s\"" msgstr "\"%s\" প্রিন্টারে মুদ্রিত হচ্ছে" #: printer/printerdrake.pm:3903 #, c-format msgid "Print option list" msgstr "প্রিন্ট সংক্রান্ত অপশনের তালিকা" # সাম #: printer/printerdrake.pm:3925 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" "আপনার %s টি HP এর HPLIP ড্রাইভার সফ্টওয়্যার দিয়ে সেটআপ করা হয়েছে। এভাবে আপনার " "প্রিন্টারের অনেক বিশেষ ফিচারকে সাপোর্ট দেয়া হয়েছে।\n" "\n" # সাম #: printer/printerdrake.pm:3928 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" "আপনার প্রিন্টারের স্ক্যানারটি সাধারণ SANE সফ্টওয়্যার দিয়ে ব্যবহার করা যাবে যেমন, " "Kooka বা XSane (দুটোই মাল্টিমিডিয়া/গ্রাফিক্স মেনুতে অবস্থিত)। " # সাম # শেয়ার #: printer/printerdrake.pm:3929 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to " "share your scanner on the network.\n" "\n" msgstr "" "আপনার স্ক্যানারটি নেটওয়ার্ক শেয়ার করার জন্য Scannerdrake (Mandriva Linux নিয়ন্ত্রণ " "কেন্দ্র হার্ডওয়্যার/স্ক্যানার) চালান।\n" "\n" # সাম: # USB mass storage? #: printer/printerdrake.pm:3933 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" "আপনার প্রিন্টারের মেমরী কার্ড রিডারগুলো সাধারণ USB mass storage এর মত ব্যবহার করা " "যায়। " # সাম #: printer/printerdrake.pm:3934 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" "কার্ড ঢোকানোর পর এটি ব্যবহার করার জন্য আপনার ডেস্কটপে একটি হার্ড ডিস্কের আইকন " "আসবে।\n" "\n" # সাম #: printer/printerdrake.pm:3936 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" "আপনার প্রিন্টারের মেমরী কার্ড রিডারগুলো ব্যবহার করতে হলে HP এর প্রিন্টার টুলবক্সে " "(মেনু: সিস্টেম/পর্যবেক্ষণ/HP প্রিন্টার টুলবক্স) \"ফাংশান\" ট্যাবে \"ফটো কার্ড ব্যবহার " "কর...\" বাটন ক্লিক করুন। " # সাম #: printer/printerdrake.pm:3937 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" "মনে রাখবেন এটি অনেক সময়সাপেক্ষ, ক্যামেরা বা USB card reader থেকে ছবি পড়া " "সাধারণত আরও দ্রুত হয়।\n" "\n" # সাম #: printer/printerdrake.pm:3940 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" "HP এর প্রিন্টার টুলবক্স (মেনু: সিস্টেম/পর্যবেক্ষণ/HP প্রিন্টার টুলবক্স) আপনার %s এর জন্য " "বিবিধ অবস্থা পর্যবেক্ষণ এবং রক্ষণাবেক্ষণ ফাংশানসমূহের সুবিধা প্রদান করে:\n" "\n" # সাম #: printer/printerdrake.pm:3941 #, c-format msgid " - Ink level/status info\n" msgstr " - কালির পরিমান/অবস্থা সম্পর্কিত তথ্য\n" # সাম #: printer/printerdrake.pm:3942 #, c-format msgid " - Ink nozzle cleaning\n" msgstr " - কালির নজল পরিস্কার\n" # সাম: incomplete #: printer/printerdrake.pm:3943 #, c-format msgid " - Print head alignment\n" msgstr " - প্রিন্ট হেড একরেখীকরন\n" # incomplete #: printer/printerdrake.pm:3944 #, c-format msgid " - Color calibration\n" msgstr " - কালার ক্যালিব্রেশন\n" # সাম # pls check the translation of # \"Acquire\" # 'Call' as in call a function. #: printer/printerdrake.pm:3959 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" "আপনার বহুমাত্রিক ডিভাইসটি স্ক্যানার হেসেবে ব্যবহার করার জন্য স্বয়ংক্রিয়ভাবে কনফিগার " "করা হয়েছিল। আপনি এখন কমান্ড লাইনে \"scanimage\" (যদি একাধিক স্ক্যানার থাকে তবে " "\"scanimage -d hp:%s\" দিয়ে নির্ধারন করুন) অথবা গ্রাফিক্যাল ইন্টারফেস \"xscanimage" "\" বা \"xsane\" ব্যবহার করে স্ক্যান করতে পারেন। আপনি যদি GIMP ব্যবহার করেন, " "তাহলে \"File\"/\"Acquire\" মেনুর সঠিক পয়েন্ট বেছে নিয়েও স্ক্যান করতে পারেন। এ " "বিষয়ে আরো সাহায্য পেতে কমান্ড লাইনে \"man scanimage\" ব্যবহার করুন।\n" "\n" "এই ডিভাইসে স্ক্যানিং সেটআপ করার জন্য \"scannerdrake\" চালানোর প্রয়োজন নেই, এটি " "তখনই দরকার হবে যদি আপনি স্ক্যানারটি নেটওয়ার্কে শেয়ার করতে চান। " #: printer/printerdrake.pm:3985 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055 #: printer/printerdrake.pm:4090 #, c-format msgid "Transfer printer configuration" msgstr "প্রিন্টার কনফিগারেশন স্থানান্তর করো" # সাম # queues #: printer/printerdrake.pm:4029 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "স্পুলার %s এর জন্য করা প্রিন্টার কনফিগারেশনটি আপনি আপনার বর্তমান স্পুলার %s এ কপি " "করতে পারেন। সমস্ত কনফিগারেশন মান (প্রিন্টারের নাম, বর্ণনা, স্থান, সংযোগের ধরন " "ডিফল্ট অপশনের মান) কপি হবে, কিন্তু প্রিন্টারের কাজগুলো কপি হবে না।\n" "সব প্রিন্ট সারি সরানো যায় না, নিম্নলিখিত কারনে:\n" #: printer/printerdrake.pm:4032 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "যে সব প্রিন্টার নভেল (Novell) সার্ভারের সাথে যুক্ত কিংবা যে সব প্রিন্টার কোন free-" "formed কমান্ডের নিকট তথ্য প্রেরণ করে, তাদেরকে CUPS সমর্থন করে না।\n" #: printer/printerdrake.pm:4034 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "পি.ডি.কিউ. শুধুমাত্র স্থানীয় প্রিন্টার, দূর-নিয়ন্ত্রিত এল.পি.ডি. প্রিন্টার, এবং সকেট/টি." "সি.পি. প্রিন্টার সমর্থন করে।\n" #: printer/printerdrake.pm:4036 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "এল.পি.ডি. এবং LPRng আই.পি.পি. প্রিন্টার সমর্থন করে না।\n" #: printer/printerdrake.pm:4038 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "উপরন্তু, এই প্রোগ্রাম বা \"foomatic-configure\" দ্বারা যে সব প্রিন্ট-সারী (Queue) " "তৈরি করা হয় নি, তাদেরকে স্থানান্তর করা যায় না।" #: printer/printerdrake.pm:4039 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "এছাড়া যে সব প্রিন্টারের PPD ফাইল প্রিন্টারের প্রস্তুতকারক কর্তৃক সরবরাহকৃত তাদের অথবা " "CUPS-এর নিজস্ব ড্রাইভারকেও স্থানান্তর করা যায় না।" #: printer/printerdrake.pm:4040 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "যে সব প্রিন্টারকে স্থানান্তর করতে চান তাদের চিহ্নিত করুন ও তারপর \"স্থানান্তর\" চাপুন।" #: printer/printerdrake.pm:4043 #, c-format msgid "Do not transfer printers" msgstr "প্রিন্টারকে স্থানান্তর করবে না" #: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060 #, c-format msgid "Transfer" msgstr "স্থানান্তর" #: printer/printerdrake.pm:4056 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "\"%s\" নামের একটি প্রিন্টার ইতিমধ্যেই %s অধীনে আছে। \n" "\"স্থানান্তর\" এ ক্লিক করুন এর উপরে লেখার জন্য।\n" "আপনি নতুন ধরণের নাম দিতে পারেন বা এই প্রিন্টারকে এড়িয়ে যেতে পারেন।" #: printer/printerdrake.pm:4077 #, c-format msgid "New printer name" msgstr "প্রিন্টারের নতুন নাম" #: printer/printerdrake.pm:4080 #, c-format msgid "Transferring %s..." msgstr "%s-কে স্থানান্তর করা হচ্ছে..." # সাম #: printer/printerdrake.pm:4091 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "আপনি আপনার পূর্বের ডিফল্ট প্রিন্টার (\"%s\") স্থানান্তর করেছেন। আপনার নতুন প্রিন্টিং " "সিস্টেম %s এর জন্যেও কি এটি ডিফল্ট প্রিন্টার হবে?" # FIXME #: printer/printerdrake.pm:4101 #, c-format msgid "Refreshing printer data..." msgstr "প্রিন্টার বিষয়ক তথ্য পুনরায় পড়া হচ্ছে..." #: printer/printerdrake.pm:4111 #, c-format msgid "Starting network..." msgstr "নেটওয়ার্ক সচল করছি..." #: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159 #: printer/printerdrake.pm:4161 #, c-format msgid "Configure the network now" msgstr "নেটওয়ার্ককে এখন কনফিগার করো" #: printer/printerdrake.pm:4156 #, c-format msgid "Network functionality not configured" msgstr "নেটওয়ার্কের কর্মক্ষমতা কনফিগার করা হয় নি" # সাম #: printer/printerdrake.pm:4157 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "আপনি একটি রিমোট প্রিন্টার কনফিগার করতে যাচ্ছেন। এটির জন্য সক্রিয় নেটওয়ার্ক সংযুক্তি " "প্রয়োজন, কিন্তু আপনার নেটওয়ার্ক এখনো কনফিগার করা হয়নি। নেটওয়ার্ক কনফিগারেশন ছাড়াই " "এগিয়ে গেলে, কনফিগার করা প্রিন্টারটি ব্যবহারযোগ্য হবে না। আপনি কিভাবে এগোতে চান?" #: printer/printerdrake.pm:4160 #, c-format msgid "Go on without configuring the network" msgstr "নেটওয়ার্ক কনফিগার না করেই এগিয়ে যাও" # সাম # ইনস্টলেশন # নিয়ন্ত্রণ কেন্দ্র #: printer/printerdrake.pm:4191 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "ইনস্টলেশনের সময় করা নেটওয়ার্ক কনফিগারেশন চালু করা যাচ্ছে না। আপনার সিস্টেম বুট " "করার পর নেটওয়ার্কে প্রবেশ করা যাচ্ছে কিনা তা পরীক্ষা করুন এবং %s নিয়ন্ত্রণ কেন্দ্র " "সেকশন \"Network & Internet\"/\"Connection\" ব্যবহার করে আপনার কনফিগারেশন ঠিক " "করুন, এবং পরবর্তীতে আবারো %s নিয়ন্ত্রণ কেন্দ্র সেকশন \"Hardware\"/\"Printer\" দিয়ে " "প্রিন্টার সেটআপ করুন" # সাম: # hardware spelling is wrong in commonwords.po #: printer/printerdrake.pm:4192 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "নেটওয়ার্ক সংযুক্তি চলন্ত ছিল না এবং সক্রিয় করা সম্ভব হয়নি। অনুগ্রহ করে আপনার " "কনফিগারেশন ও হার্ডওয়্যার পরীক্ষা করুন। অতপর: আবার আপনার দূরবর্তী প্রিন্টার কনফিগার " "করার চেষ্টা করুন।" #: printer/printerdrake.pm:4202 #, c-format msgid "Restarting printing system..." msgstr "প্রিন্টিং ব্যবস্থা পুনরায় চালু করা হচ্ছে..." #: printer/printerdrake.pm:4233 #, c-format msgid "high" msgstr "উচ্চ" #: printer/printerdrake.pm:4233 #, c-format msgid "paranoid" msgstr "মতিভ্রম" #: printer/printerdrake.pm:4235 #, c-format msgid "Installing a printing system in the %s security level" msgstr "%s নিরাপত্তা মাত্রা অনুসারে একটি প্রিন্টিং ব্যবস্থা ইনস্টল করা হচ্ছে" # সাম # প্রিন্টিং সিস্টেম # নিরাপত্তা স্তর #: printer/printerdrake.pm:4236 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "আপনি 2$%s নিরাপত্তা চালুকৃত একটি সিস্টেমে 1$%s প্রিন্টিং সিস্টেম ইনস্টল করতে " "যাচ্ছেন।\n" "\n" "এই প্রিন্টিং সিস্টেমটি একটি daemon (নেপথ্যে চলা প্রসেস) চালিয়ে রাখে যেটি প্রিন্ট " "জবের জন্য অপেক্ষা করে ও তা নিয়ন্ত্রন করে। এই daemon টি নেটওয়ার্কের দুরবর্তী মেশিন " "থেকেও ব্যবহারযোগ্য, এবং একটি আক্রমনের লক্ষ্যবস্তুও বটে। অতএব এই নিরাপত্তা স্তরে " "সাধারনত অল্পকিছু daemon চালু করা হয়।\n" "\n" "আপনি কি আসলেই এই মেশিনে প্রিন্টার কনফিগার করতে চান?" #: printer/printerdrake.pm:4272 #, c-format msgid "Starting the printing system at boot time" msgstr "বুট করার সময় প্রিন্টিং ব্যবস্থাকে চালু করা হবে" # সাম # সয়ংক্রিয়ভাবে # নিরাপত্তা স্তর #: printer/printerdrake.pm:4273 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "যখন মেশিন বুট হয়, প্রিন্টিং সিস্টেম (%s) সয়ংক্রিয়ভাবে চালু হবে না।\n" "\n" "সম্ভবত উচু নিরাপত্তা স্তরে যাওয়ার কারনে প্রিন্টিং সয়ংক্রিয়ভাবে চালু হওয়া বন্ধ করে " "দেয়া হয়েছে। কারন প্রিন্টিং সিস্টেম আক্রমনের একটি সম্ভাব্য লক্ষ্যবস্তু।\n" "\n" "আপনি কি প্রিন্টিং সিস্টেম সয়ংক্রিয়ভাবে চালুকরণ পুনরায় চালু করতে চান?" #: printer/printerdrake.pm:4296 #, c-format msgid "Checking installed software..." msgstr "ইনস্টলকৃত সফটওয়ার পরীক্ষা করা হচ্ছে..." #: printer/printerdrake.pm:4302 #, c-format msgid "Removing %s..." msgstr "%s মুছে ফেলা হচ্ছে..." #: printer/printerdrake.pm:4306 #, c-format msgid "Could not remove the %s printing system!" msgstr "প্রিন্টিং ব্যবস্থা %s-কে অপসারণ করা যায় নি!" #: printer/printerdrake.pm:4326 #, c-format msgid "Installing %s..." msgstr "%s ইনস্টল করা হচ্ছে..." #: printer/printerdrake.pm:4330 #, c-format msgid "Could not install the %s printing system!" msgstr "প্রিন্টিং ব্যবস্থা %s-কে ইনস্টল করা যায় নি!" # সাম #: printer/printerdrake.pm:4398 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" "এই মোডে কোন স্থানীয় প্রিন্টিং সিস্টেম নেই, সব প্রিন্ট অনুরোধ সরাসরি নিম্নোল্লেখিত " "সার্ভারে প্রবেশ করে। দ্রষ্টব্য: এই সময়ে স্থানীয় প্রিন্ট সারি নির্দিষ্ট করার কোন ব্যবস্থা " "নেই এবং যদি উল্লেখিত সার্ভার নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব হবে না।" # সাম: Quit = বাহির? # Quit #: printer/printerdrake.pm:4400 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" "আপনার CUPS সার্ভারের হোস্ট নাম অথবা IP উল্লেখ করুন এবং যদি আপনি এই মোড ব্যবহার " "করতে চান তবে ঠিক আছে ক্লিক করুন, অন্যথায় \"বাহির\" ক্লিক করুন।" #: printer/printerdrake.pm:4414 #, c-format msgid "Name or IP of remote server:" msgstr "দূরবর্তী সার্ভারের নাম অথবা IP:" #: printer/printerdrake.pm:4434 #, c-format msgid "Setting Default Printer..." msgstr "ডিফল্ট প্রিন্টার নির্দিষ্ট করা হচ্ছে..." # সাম #: printer/printerdrake.pm:4454 #, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "স্থানীয় CUPS প্রিন্টিং সিস্টেম, নাকি দূরবর্তী CUPS সার্ভার?" #: printer/printerdrake.pm:4455 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "CUPS প্রিন্টিং সিস্টেম দুইভাবে ব্যবহৃত হতে পারে: " #: printer/printerdrake.pm:4457 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "১। CUPS প্রিন্টিং সিস্টেম স্থানীয়ভাবে চলতে পারে। " # সাম #: printer/printerdrake.pm:4458 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" "স্থানীয় প্রিন্টারগুলো ব্যবহার করা যেতে পারে এবং একই নেটওয়ার্কে অবস্থিত অনান্য CUPS " "সার্ভারের দূরবর্তী প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে সনাক্ত হয়। " # সাম: # resources = রিসোর্স লিখলাম। # daemon #: printer/printerdrake.pm:4459 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" "এই পদ্ধতিটির অসুবিধা হল, স্থানীয় মেশিনে অনেক বেশি রিসোর্স প্রয়োজন হয়: অতিরিক্ত " "সফ্টওয়্যার প্যাকেজ ইনস্টল করতে হয়, পাশাপাশি CUPS daemon চলতে থাকে যার জন্য মেমরী " "প্রয়োজন, এবং IPP পোর্টটি (পোর্ট ৬৩১) খোলা হয়। " #: printer/printerdrake.pm:4461 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "২। সকল প্রিন্টিং অনুরোধ সরাসরি দূরবর্তী CUPS সার্ভারে পাঠানো হবে। " # সাম # daemon #: printer/printerdrake.pm:4462 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" "এখানে, স্থানীয় রিসোর্সের উপর চাপ অনেকটা কমিয়ে আনা হয়েছে। কোন CUPS daemon " "চালানো বা পোর্ট খোলা হয় না, স্থানীয় প্রিন্ট সারির জন্য সফ্টওয়্যার সেটআপ করা হয় না। " "অতএব মেমরী ও ডিস্কস্পেস দুটোই কম ব্যবহৃত হয়। " # সাম #: printer/printerdrake.pm:4463 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" "দুর্বল দিক হচ্ছে, এই সময়ে স্থানীয় প্রিন্টার নির্দিষ্ট করার কোন ব্যবস্থা নেই এবং " "উল্লেখিত সার্ভার যদি নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব হবে না। " #: printer/printerdrake.pm:4465 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "আপনার সিস্টেমে CUPS কিভাবে সেট-আপ হওয়া উচিত?" #: printer/printerdrake.pm:4469 printer/printerdrake.pm:4484 #: printer/printerdrake.pm:4488 printer/printerdrake.pm:4494 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "দূরবর্তী সার্ভার, এখানে নাম বা আই-পি দিন:" # সাম #: printer/printerdrake.pm:4483 #, c-format msgid "Local CUPS printing system" msgstr "স্থানীয় CUPS প্রিন্টিং সিস্টেম" #: printer/printerdrake.pm:4522 #, c-format msgid "Select Printer Spooler" msgstr "প্রিন্টার স্পুলার (Spooler) নির্বাচন করুন" #: printer/printerdrake.pm:4523 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "আপনি কোন প্রিন্টিং ব্যবস্থা (স্পুলার) ব্যবহার করতে চান?" #: printer/printerdrake.pm:4572 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "প্রিন্টার \"%s\" কে কনফিগার করার প্রচেষ্টা ব্যর্থ হয়েছে!" #: printer/printerdrake.pm:4587 #, c-format msgid "Installing Foomatic..." msgstr "ফুম্যাটিক ইনস্টল করা হচ্ছে..." #: printer/printerdrake.pm:4593 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "%s প্যাকেজ ইনস্টল করা যায় নি, %s চালু করা যাচ্ছে না!" # সাম #: printer/printerdrake.pm:4785 #, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "নিম্নের প্রিন্টারগুলো কনফিগার করা হয়েছে। প্রিন্টারের সেটিংসমূহ বদলাতে, ডিফল্ট " "প্রিন্টার সেট করতে বা তথ্য জানতে, এর নামের উপর ডাবল‌-ক্লিক করুন। " #: printer/printerdrake.pm:4815 #, c-format msgid "Display all available remote CUPS printers" msgstr "সকল ব্যবহারযোগ্য দূর-নিয়ন্ত্রিত CUPS প্রিন্টার প্রদর্শন করো" #: printer/printerdrake.pm:4816 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "প্রিন্টারের তালিকা পুনরায় প্রদর্শন করো (সকল ব্যবহারযোগ্য দূর-নিয়ন্ত্রিত CUPS প্রিন্টার " "প্রদর্শন করার জন্য)" #: printer/printerdrake.pm:4827 #, c-format msgid "CUPS configuration" msgstr "CUPS কনফিগার" #: printer/printerdrake.pm:4839 #, c-format msgid "Change the printing system" msgstr "প্রিন্টিং ব্যবস্থা পরিবর্তন করো" #: printer/printerdrake.pm:4848 #, c-format msgid "Normal Mode" msgstr "সাধারণ মোড" #: printer/printerdrake.pm:4849 #, c-format msgid "Expert Mode" msgstr "অভিজ্ঞ মোড" #: printer/printerdrake.pm:5118 printer/printerdrake.pm:5176 #: printer/printerdrake.pm:5255 printer/printerdrake.pm:5264 #, c-format msgid "Printer options" msgstr "প্রিন্টার সংক্রান্ত অপশন" #: printer/printerdrake.pm:5154 #, c-format msgid "Modify printer configuration" msgstr "প্রিন্টার কনফিগারেশন পরিবর্তন করো" #: printer/printerdrake.pm:5156 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "প্রিন্টার %s%s\n" "আপনি এই প্রিন্টারের কি পরিবর্তন করতে চান?" # সাম #: printer/printerdrake.pm:5161 #, c-format msgid "This printer is disabled" msgstr "এই প্রিন্টারটি নিষ্ক্রিয়" #: printer/printerdrake.pm:5163 #, c-format msgid "Do it!" msgstr "করে ফেলো!" #: printer/printerdrake.pm:5168 printer/printerdrake.pm:5223 #, c-format msgid "Printer connection type" msgstr "প্রিন্টার সংযোগের ধরন" #: printer/printerdrake.pm:5169 printer/printerdrake.pm:5229 #, c-format msgid "Printer name, description, location" msgstr "প্রিন্টারের নাম, বিবরণ, অবস্থান" #: printer/printerdrake.pm:5171 printer/printerdrake.pm:5248 #, c-format msgid "Printer manufacturer, model, driver" msgstr "প্রিন্টারের প্রস্তুতকারক, মডেল, ড্রাইভার" #: printer/printerdrake.pm:5172 printer/printerdrake.pm:5249 #, c-format msgid "Printer manufacturer, model" msgstr "প্রিন্টারের প্রস্তুতকারক, মডেল" #: printer/printerdrake.pm:5178 printer/printerdrake.pm:5259 #, c-format msgid "Set this printer as the default" msgstr "এই প্রিন্টারটিকে ডিফল্ট হিসেবে নির্দিষ্ট করো" # সাম #: printer/printerdrake.pm:5183 printer/printerdrake.pm:5265 #: printer/printerdrake.pm:5267 #, c-format msgid "Enable Printer" msgstr "প্রিন্টার সক্রিয় করো" # সাম #: printer/printerdrake.pm:5186 printer/printerdrake.pm:5270 #: printer/printerdrake.pm:5272 #, c-format msgid "Disable Printer" msgstr "প্রিন্টার নিষ্ক্রিয় করো" #: printer/printerdrake.pm:5187 printer/printerdrake.pm:5275 #, c-format msgid "Print test pages" msgstr "পরীক্ষামূলক পৃষ্ঠা ছাপাও" #: printer/printerdrake.pm:5188 printer/printerdrake.pm:5277 #, c-format msgid "Learn how to use this printer" msgstr "এই প্রিন্টারের ব্যবহার শিখুন" #: printer/printerdrake.pm:5189 printer/printerdrake.pm:5279 #, c-format msgid "Remove printer" msgstr "প্রিন্টার অপসারণ করো" #: printer/printerdrake.pm:5237 #, c-format msgid "Removing old printer \"%s\"..." msgstr "পুরনো প্রিন্টার \"%s\"-কে অপসারণ করা হচ্ছে..." # সাম #: printer/printerdrake.pm:5268 #, c-format msgid "Printer \"%s\" is now enabled." msgstr "\"%s\" প্রিন্টারটি এখন সক্রিয়।" # সাম #: printer/printerdrake.pm:5273 #, c-format msgid "Printer \"%s\" is now disabled." msgstr "\"%s\" প্রিন্টারটি এখন নিষ্ক্রিয়।" #: printer/printerdrake.pm:5310 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "আপনি কি \"%s\" প্রিন্টারটি অপসারণের ব্যাপারে নিশ্চিত?" #: printer/printerdrake.pm:5314 #, c-format msgid "Removing printer \"%s\"..." msgstr "\"%s\" প্রিন্টারটি অপসারণ করা হচ্ছে..." #: printer/printerdrake.pm:5338 #, c-format msgid "Default printer" msgstr "ডিফল্ট প্রিন্টার" #: printer/printerdrake.pm:5339 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "এখন \"%s\" প্রিন্টারটি ডিফল্ট হিসেবে রয়েছে।" #: raid.pm:41 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "_ফরম্যাটকৃত_ রেইড %s-এ পার্টিশন যোগ করা যাচ্ছে না" #: raid.pm:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "রেইড স্তর %d-এর জন্য পর্যাপ্ত সংখ্যক পার্টিশন নেই\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "/usr/share/sane/firmware ডিরেক্টরিটি তৈরি করা যায় নি!" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "/usr/share/sane/%s লিঙ্কটি তৈরি করা যায় নি!" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" "ফার্মওয়ার ফাইল %s-কে /usr/share/sane/firmware ডিরেক্টরিতে কপি করা যায় নি!" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "ফার্মওয়ার ফাইল %s-এর অনুমতি নির্দিষ্ট করা যায় নি!" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "স্ক্যানার-ড্রেক" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "আপনার স্ক্যানার(সমূহ) শেয়ার করার জন্য প্রয়োজনীয় প্যাকেজ ইনস্টল করা যায় নি।" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "আপনার স্ক্যানার(সমূহ) রুট ব্যতীত অপর ব্যবহারকারীগণ ব্যবহার করতে পারবে না।" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "ভূয়া IPv4 বার্তা গ্রহণে সম্মতি/অসম্মতি জানাও।" #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr " ব্রডকাস্ট আই.সি.এম.পি. ইকো গ্রহণে সম্মতি/অসম্মতি জানাও।" #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr " আই.সি.এম.পি. ইকো গ্রহণে সম্মতি/অসম্মতি জানাও।" #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "স্বয়ংক্রিয় লগ-ইন অনুমোদন/নিষিদ্ধ করো" #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "এটির মান \"ALL\" হলে /etc/issue ও /etc/issue.net উভয়কেই অবস্থান করতে দেওয়া " "হয়।\n" "\n" "আর এটির মান NONE হলে কোনটিকেই রাখা হয় না।\n" "\n" "অন্যথায় শুধুমাত্র /etc/issue-কেই রাখা হয়।" #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "কনসোল ব্যবহারকারী কর্তৃক রিবুট অনুমোদন/নিষিদ্ধ করো।" #: security/help.pm:29 #, c-format msgid "Allow/Forbid remote root login." msgstr "দূরবর্তী কম্পিউটার থেকে রুট অ্যাকাউন্টে লগ-ইন অনুমোদন/নিষিদ্ধ করো।" #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "সরাসরি রুট অ্যাকাউন্টে লগ-ইন অনুমোদন/নিষিদ্ধ করো।" #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "ডিসপ্লে ব্যবস্থাপকে ব্যবহারকারীদের তালিকা প্রদর্শন অনুমোদন/নিষিদ্ধ করো (কে.ডি.এম. " "এবং জি.ডি.এম.)।" # সাম #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" "রুট অ্যাকাউন্ট থেকে ব্যবহারকারী বদলানোর সময় ডিসপ্লে এক্সপোর্ট করা অনুমোদন/নিষিদ্ধ " "করো। pam_xauth(8) তে বিস্তারিত দেখুন।'" # সাম #: security/help.pm:40 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "X সংযোগ অনুমোদন/নিষিদ্ধ করো:\n" "\n" "- সব (সব সংযোগ অনুমোদিত),\n" "\n" "- স্থানীয় (শুধুমাত্র স্থানীয় মেশিন থেকে সংযোগ),\n" "\n" "- একটিও না (কোন সংযোগ অনুমোদিত নয়)।" # sam: argument = আর্গুমেন্ট? # argument #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "এই প্রেরিত মান নির্দেশ করে ক্লায়েন্টগুলো নেটওয়ার্ক থেকে tcp পোর্ট ৬০০০ দিয়ে X " "সার্ভারে সংযুক্ত হতে অনুমদিত কিনা।" # সাম #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "অনুমোদন করো:\n" "\n" "- tcp_wrappers কর্তৃক নিয়ন্ত্রিত সকল সার্ভিস (hosts.deny(5) man page দেখুন) যদি " "\"ALL\" সেট করা থাকে,\n" "\n" "- শুধু স্থানীয় যদি \"LOCAL\" সেট করা থাকে,\n" "\n" "- কোনটি নয় যদি \"NONE\" সেট করা থাকে।\n" "\n" "আপনার প্রয়োজনীয় সার্ভিসগুলোকে অনুমোদন করতে, /etc/hosts.allow ব্যবহার করুন (hosts." "allow(5) দেখুন)।" # সাম: incomplete #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "/etc/security/msec/security.conf এ SERVER_LEVEL\n" "(বা SECURE_LEVEL, যদি অনুপস্থিত থাকে) যদি ৩ এর বেশী হয়, তবে\n" "/etc/security/msec/server এ নির্দেশ করার জন্য\n" "symlink /etc/security/msec/server তৈরী করে।.\n" "\n" "chkconfig --add, /etc/security/msec/serve টি ব্যবহার করে প্যাকেজ\n" "ইনস্টলেশনের সময় ফাইলে অবস্থিত সার্ভিস যোগ করার ব্যপারে\n" "সিদ্ধান্ত নেয়।" # সাম #: security/help.pm:72 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "ব্যবহারকারীদের জন্য crontab এবং at সক্রিয়/নিষ্ক্রিয় করো।\n" "\n" "অনুমোদিত ব্যবহারকারীদের /etc/cron.allow এবং /etc/at.allow এ রাখো (man at(1)\n" "ও crontab(1) দেখুন)।" #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "কনসোল ১২ তে syslog রিপোর্ট সক্রিয়/নিষ্ক্রিয় করো" # সাম: name resolution = নাম বিশ্লেষন? # 'name resolution' is translated in various ways in this file. #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" "নাম বিশ্লেষন স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয়/নিষ্ক্রিয় করো। যদি\n" "\"%s\" সত্য হয়, তবে syslog এও রিপোর্ট করো।" #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "নিরাপত্তা সতর্কতা:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "আই.পি. স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "সিস্টেমে libsafe পাওয়া গেলে তা সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "IPv4-এর সন্দেহজনক প্যাকেট সম্পর্কে লগ লেখা সক্রিয়/নিষ্ক্রিয় করো।" # FIXME #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "msec-এর ঘন্টা প্রতি নিরাপত্তা পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" " শুধুমাত্র wheel গ্রুপের ব্যবহারকারীদের জন্য অথবা যে কোন ব্যবহারকারীর জন্য su সক্রিয় " "করো।" #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "ব্যবহারকারীর পরিচয় প্রমাণের জন্য পাসওয়ার্ড ব্যবহার করো।" # FIXME #: security/help.pm:94 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "ইথারনেট কার্ডের বহুরূপী পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr " দৈনিক নিরাপত্তা পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr " একক ব্যবহারের ক্ষেত্রে (Single user level) sulogin(8) সক্রিয়/নিষ্ক্রিয় করো।" #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" "msec কর্তৃক পাসওয়ার্ড পুরনো হয়ে যাওয়ার যে পরীক্ষা, তা থেকে এই নামকে বাদ দাও।" # সাম: not sure about the word বয়:বৃদ্ধি # aging #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "পাসওয়ার্ড বয়স \"max\" এবং পরিবর্তনে বিলম্ব \"inactive\" এ সেট করো।" #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "পাসওয়ার্ডের পুনঃব্যবহার রোধকল্পে পাসওয়ার্ডের ইতিহাস-তালিকার দৈর্ঘ্য নির্দিষ্ট করো।" #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "পাসওয়ার্ডের সর্বনিম্ন দৈর্ঘ্য এবং পাসওয়ার্ডে ধারনকৃত সর্বনিম্ন সংখ্যক অঙ্ক এবং বড়হাতের " "অক্ষর সংখ্যা নির্দিষ্ট করো।" #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "রুট-এর umask নির্দিষ্ট করো।" #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "এটির মান হ্যাঁ হলে, উন্মুক্ত পোর্টসমূহ পরীক্ষা করো।" # sam: yes = হ্যাঁ? # at many palces 'yes' is kept 'yes' #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "যদি হ্যাঁ সেট করা থাকে, পরীক্ষা কর:\n" "\n" "- পাসওয়ার্ড ফাঁকা কিনা,\n" "\n" "- /etc/shadow তে পাসওয়ার্ড অনুপস্থিত কিনা\n" "\n" "- root ছাড়া কারো id ০ কিনা।" #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "এটির মান হ্যাঁ হলে, ব্যবহারকারীর ব্যক্তিগত ফোল্ডারের ফাইলসমূহের অনুমতি পরীক্ষা করে।" #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "এটির মান হ্যাঁ হলে, নেটওয়ার্ক ডিভাইসগুলো প্রমিসকাস (Promiscuous) মোডে আছে কিনা তা " "পরীক্ষা করে।" #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "এটির মান হ্যাঁ হলে, দৈনিক নিরাপত্তা পরীক্ষা চালাও।" #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "এটির মান হ্যাঁ হলে, sgid ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো।" #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" "এটির মান হ্যাঁ হলে, /etc/shadow ফাইলে ফাঁকা পাসওয়ার্ড আছে কিনা তা পরীক্ষা করো।" #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "এটির মান হ্যাঁ হলে, suid/sgid ফাইলের চেকসাম (Checksum) পরীক্ষা করো।" #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "এটির মান হ্যাঁ হলে, suid রুট ফাইলসমূহের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো।" #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "এটির মান হ্যাঁ হলে, কোন মালিকানাবিহীন ফাইল থাকলে তা জানাও।" # FIXME: অর্থ বুঝতেসিনা ;-( #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "এটির মান হ্যাঁ হলে, সকলের পরিবর্তনযোগ্য ফাইল/ডিরেক্টরি পরীক্ষা করো" #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "এটির মান হ্যাঁ হলে, chkrootkit-এর সাহায্যে পরীক্ষা চালাও।" # FIXME #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "এটিতে টিক দেওয়া থাকলে মেইল সংক্রান্ত রিপোর্ট এই ই-মেইল ঠিকানায় অথবা রুট-এর নিকট " "প্রেরণ করা হয়।" # সাম #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "যদি হ্যাঁ সেট করা থাকে, পরীক্ষার ফলাফল মেইল করে দাও।" #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "কোন বিষয়ে সতর্ক করার না থাকলে মেইল প্রেরণ করবে না" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "এটির মান হ্যাঁ হলে, আর.পি.এম. ডেটাবেসের ওপর কিছু পরীক্ষা চালাও।" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "এটির মান হ্যাঁ হলে পরীক্ষার ফলাফল syslog-এ প্রেরণ করে।" #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "এটির মান হ্যাঁ হলে পরীক্ষার ফলাফল tty-এ প্রেরণ করে।" #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "শেল কমান্ডের ইতিহাস-তালিকার (History) আকার নির্দিষ্ট করো। এর মান -১ হওয়ার অর্থ " "তালিকার কোন নির্দিষ্ট আকার নেই।" #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "শেল টাইম-আউট নির্দিষ্ট করো। এর মান ০ হওয়ার অর্থ কোন টাইম-আউট নেই।" #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "টাইম-আউটের একক হল সেকেন্ড" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "ব্যবহারকারীর umask নির্দিষ্ট করো।" #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "ভূয়া IPv4 সমস্যাসূচক বার্তা অনুমোদন করো" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "ব্রডকাস্ট আই.সি.এম.পি. ইকো অনুমোদন করো" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "আই.সি.এম.পি. ইকো অনুমোদন করো" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* বিদ্যমান" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "কনসোল ব্যবহারকারী কর্তৃক রিবুট" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "দূরবর্তী কম্পিউটার থেকে রুট অ্যাকাউন্টে লগ-ইন করা অনুমোদন করো" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "সরাসরি রুট অ্যাকাউন্টে লগ-ইন" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" "ডিসপ্লে ব্যবস্থাপকে (কে.ডি.এম. ও জি.ডি.এম.) ব্যবহারকারীদের তালিকা প্রদর্শন করো" # সাম: Export =? #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "root থেকে অন্য ব্যবহারকারীতে বদলানোর সময় ডিসপ্লে এক্সপোর্ট করো" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "এক্স উইন্ডো সংযোগ অনুমোদন করো" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "এক্স উইন্ডোর সাথে টি.সি.পি. সংযোগ অনুমোদন করো" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "tcp_wrappers কর্তৃক নিয়ন্ত্রিত সকল সার্ভিস অনুমোদন করো" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig, msec-এর নিয়মাবলী মেনে চলে" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "ব্যবহারকারীদের জন্য \"crontab\" ও \"at\" সক্রিয় করো" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "Syslog ১২ নং কনসোলে বার্তা পাঠায়" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "নেইম রেজলুশন স্পুফিং প্রতিরক্ষা" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "আই.পি. স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয় করো" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "সিস্টেমে libsafe থাকলে তাকে সক্রিয় করো" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "IPv4-এর সন্দেহজনক প্যাকেট সম্পর্কে লগ রাখার ব্যবস্থা সক্রিয় করো" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "প্রতিঘন্টায় msec নিরাপত্তা পরীক্ষা সক্রিয় করো" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" "শুধুমাত্র wheel গ্রুপের সদস্যদের জন্য অথবা সকল ব্যবহারকারীর জন্য su ব্যবহারের সুযোগ " "সক্রিয় করো" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "ব্যবহারকারীর পরিচয় পরীক্ষার জন্য পাসওয়ার্ড ব্যবহার করো" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "ইথারনেট কার্ডের বহুরূপীতা (Promiscuity) পরীক্ষা" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "দৈনিক নিরাপত্তা পরীক্ষা" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "একক ব্যবহারের ক্ষেত্রে sulogin(8)" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "এটির জণ্য পাসওয়ার্ডের বয়স বৃদ্ধি ঘটবে না" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "পাসওয়ার্ড বাতিলকরণ ও অ্যাকাউন্ট নিষ্ক্রিয়করণের সময়সীমা নির্দিষ্ট করুন" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "পুরনো পাসওয়ার্ডের তালিকার দৈর্ঘ্য" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "পাসওয়ার্ডের সর্বনিম্ন দৈর্ঘ্য ও এতে অবস্থিত অঙ্ক ও বড় হাতের অক্ষরের সংখ্যা" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "রুট-এর umask" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "শেল চালিত পুরনো কমান্ডের তালিকার আকার" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "শেল টাইম-আউট" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "ব্যবহারকারীর umask" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "উন্মুক্ত পোর্ট আছে কিনা পরীক্ষা করো" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "অনিরাপদ অ্যাকাউন্ট আছে কিনা পরীক্ষা করো" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "ব্যবহারকারীর ব্যক্তিগত ডিরেক্টরিতে অবস্থিত ফাইলের অনুমতি পরীক্ষা করো" #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "নেটওয়ার্ক ডিভাইসসমূহ প্রমিসকাস (Pormiscuous) মোডে আছে কিনা তা পরীক্ষা করো" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "দৈনিক নিরাপত্তা পরীক্ষা চালাও" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "sgid ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "/etc/shadow ফাইলে ফাঁকা পাসওয়ার্ডের উপস্থিতি পরীক্ষা করো" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "suid/sgid ফাইলের চেকসাম (Checksum) পরীক্ষা করো" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "suid রুট ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "মালিকানাবিহীন ফাইলের উপস্থিতি জানাও" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "সকলের পরিবর্তনযোগ্য ফাইল/ডিরেক্টরি আছে কিনা তা পরীক্ষা করো" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "chkrootkit পরীক্ষা চালাও" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "অপ্রয়োজনে মেইল প্রেরণ করবে না" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "এটিতে টিকে দেওয়া থাকলে, এই ই-মেইল ঠিকানায় অথবা রুট-এর নিকট মেইলের মাধ্যমে " "রিপোর্ট প্রেরণ করো" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "মেইলের সাহায্যে পরীক্ষার ফলাফল জানাও" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "আর.পি.এম. ডেটাবেসের ওপর কিছু পরীক্ষা চালাও" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "syslog-কে পরীক্ষার ফলাফল জানাও" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "tty-এ পরীক্ষার ফলাফল লিখো" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "ক্র্যাকারগণকে স্বাগতম" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "অপর্যাপ্ত" #: security/level.pm:13 #, c-format msgid "High" msgstr "উন্নত" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "অধিকতর উন্নত" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "মাত্রাতিরিক্ত" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "এই স্তরকে সতর্কতার সাথে ব্যবহার করতে হবে। এটি সিস্টেমের ব্যবহার সহজ করে তুললেও, " "সিস্টেমের নিরাপত্তা\n" "হ্রাস করে। ইন্টারনেটে বা অন্যান্য কম্পিউটারের সাথে যুক্ত সিস্টেমে এই স্তরে নিরাপত্তা " "ব্যবহার করা উচিত্‍ নয়।\n" "এক্ষেত্রে কোন পাসওয়ার্ড ব্যবহার করা হয় না।" #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "পাসওয়ার্ড ব্যবস্থা এখন সক্রিয় হলেও, কম্পিউটারটিকে নেটওয়ার্কের সাথে যুক্ত না করার " "পরামর্শই দেওয়া যাচ্ছে।" #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "যে সব কম্পিউটার ক্লায়েন্ট হিসেবে ইন্টারনেটের সাথে যুক্ত হয়, তাদের সাধারণ নিরাপত্তার " "জন্য এই স্তরের নিরাপত্তা গ্রহণের পরামর্শ দেওয়া যাচ্ছে।" #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "ইতিমধ্যেই কিছু সীমাবদ্ধতা আরোপ করা হয়েছে, এবং প্রতিরাতে স্বয়ংক্রিয়ভাবে আরো কিছু " "পরীক্ষা চালানো হবে।" #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "এই স্তরের নিরাপত্তা গ্রহণের মাধ্যমে সিস্টেমটিকে সার্ভার হিসেবে ব্যবহার করা নিরাপদ " "হয়ে ওঠেছে।\n" "যে পরিমাণ নিরাপত্তা ব্যবস্থা গ্রহণ করা হয়েছে তাতে সিস্টেমটি নিরাপদেই সার্ভার " "হিসেবে অসংখ্য ক্লায়েন্টের\n" "সাথে সংযোগ স্থাপন করতে পারবে। বিশেষ দ্রষ্টব্য: যদি আপনার সিস্টেমটি ইন্টারনেটের " "সাথে শুধুই\n" "ক্লায়েন্ট হিসেবে যুক্ত হয়, তবে আরো নিম্ন স্তরের নিরাপত্তা বেছে নিন।" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "এটি পূর্বতন স্তরের মতই, তবে সিস্টেমটি এখন সম্পূর্ণ রুদ্ধ এবং সর্বোচ্চ নিরাপত্তা স্তরে " "রয়েছে।" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "ড্রেকসেক-এর প্রাথমিক অপশন" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "অনুগ্রহপূর্বক আকাঙ্খিত নিরাপত্তা মাত্রা বেছে নিন" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "নিরাপত্তা স্তর" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "সার্ভারের জন্য libsafe ব্যবহার করো" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "একটি লাইব্রেরি, যা বাফার ওভারফ্লো ও ফরমেট স্ট্রিং আক্রমণ প্রতিরোধ করে।" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "নিরাপত্তা বিষয়ক অ্যাডমিনিস্ট্রেটর (লগ-ইন বা ই-মেইল)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "ALSA (Advanced Linux Sound Architecture) সাউন্ড সিস্টেম চালু করো" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "অ্যানাক্রোন একটি পর্যায়ক্রমিক কমান্ড শিডিউলার (Scheduler) ।" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "ব্যাটারির অবস্থা পর্যবেক্ষণ এবং পর্যবেক্ষণলব্ধ তথ্য syslog ব্যবহার করে সংরক্ষণ করার " "জন্য apmd ব্যবহার করা হয়।\n" "এছাড়া ব্যাটারির চার্জ কমে গেলে কম্পিউটার বন্ধ করার কাজেও এটি ব্যবহার করা যায়।" # সাম: batch = ? #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "at কমান্ড দিয়ে শিডিউলকৃত কমান্ডগুলো নির্ধারিত সময়ে চালাবে, এবং যখন গড় চাপ\n" "যথেষ্ট কম থাকে, তখন batch কমান্ডগুলো চালাবে।" # সাম #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron একটি আদর্শ UNIX প্রোগ্রাম যা কিনা ব্যবহারকারী‌-নির্দশিত প্রোগ্রামসমূহ নিয়মিত\n" "ও নির্ধারিত সময়ে চালনা করে। vixie cron, মৌলিক UNIX cron এর সাথে আরও কিছু\n" "বৈশিষ্ট যোগ করে, যেমন উন্নত নিরাপত্তা ও শক্তিশালী কনফিগারেশন অপশনসমূহ।" # সাম #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "FAM একটি ফাইল পর্যবেক্ষণ daemon। এটি ফাইলে কোন পরিবর্তন হলে তার রিপোর্ট পেতে " "ব্যবহৃত হয়।\n" "GNOME এবং KDE এটি ব্যবহার করে থাকে" # সাম #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM, Midnight Commander এর মত টেক্সট‌-নির্ভর Linux অ্যাপলিকেশনসমূহে\n" "মাউস সাপোর্ট যোগ করে। এটি দিয়ে মাউস-নির্ভর কনসোল কাটো-ও-সাঁটো অপারেশন সম্ভব হয় " "এবং এটি কনসোলে\n" " পপ-আপ মেনুও সমর্থন করে।" #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "হার্ডড্রেক একটি হার্ডওয়ার সনাক্তকারক চালায়\n" "এবং কখনো কখনো নতুন/পরিবর্তিত হার্ডওয়ার কনফিগার করে।" #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "অ্যাপাচি একটি ওয়ার্ল্ড ওয়াইড ওয়েব সার্ভার। এটি এইচ.টি.এম.এল. ফাইল ও সি.জি.আই. " "পরিবেশনে ব্যবহৃত হয়।" # সাম #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "ইন্টারনেট সুপারসার্ভার daemon (সাধারণত বলা হয় inetd) প্রয়োজন অনুযায়ী\n" "বিভিন্ন ইন্টারনেট সার্ভিস শুরু করে। এটির অধীনে অনেক সার্ভিস চালু হয়,\n" "যেমন telnet, ftp, rsh, এবং rlogin। inetd নিষ্ক্রিয় করলে এটির অধীনে থাকা\n" "সব সার্ভিস বন্ধ হয়ে যাবে।" # সাম #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "লিনাক্স কার্নেল ২.২ এর জন্য প্যাকেট শোধন শুরু করুন, যা কিনা\n" "একটি ফায়ারওয়াল সেটআপ করে আপনার মেশিনকে নেটওয়ার্কের আক্রমন থেকে রক্ষা করবে।" # সাম #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "এই প্যাকেজটি /etc/sysconfig/keyboard এ সেট করা নির্বাচিত কীবোর্ড\n" "ম্যাপটি লোড করে। kbdconfig ইউটিলিটি ব্যবহার করে এটি নির্বাচন করা যেতে পারে।\n" "বেশিরভাগ মেশিনের জন্য আপনার এটি সক্রিয় রাখা উচিত।" # সাম: সিওর না। #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "/boot এ /usr/include/linux/{autoconf,version}.h এর জন্য\n" "কার্নেল হেডারের স্বয়ংক্রিয় পুনর্সম্পাদন" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "বুট হওয়ার সময় স্বয়ংক্রিয়ভাবে হার্ডওয়ার সনাক্তকরণ ও কনফিগারেশন।" # সাম #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf, বুটের সময় বিভিন্ন কাজের আয়োজন করে যাতে সিস্টেম\n" "কনফিগারেশন ঠিক থাকে।" # সাম #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd একটি প্রিন্ট daemon এবং lpr সঠিকভাবে কাজ করার জন্য প্রয়োজন। এটি মুলত\n" "একটি সার্ভার যা কিনা প্রিন্টিং এর কাজগুলো প্রিন্টারগুলোর মাঝে সঠিকভাবে বিতরণ করে।" #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "লিনাক্স ভার্চুয়াল সার্ভার উচ্চ কার্যসম্পন্ন এবং উচ্চ সুবিধা সম্পন্ন সার্ভার তৈরীতে\n" "ব্যবহৃত হয়।" #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) একটি ডোমেইন নাম সার্ভার (ডি.এন.এস.) যা হোস্ট-নাম থেকে আইপি ঠিকানা " "সমাধানে ব্যবহৃত হয়।" #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "সকল নেটওয়ার্ক ফাইল সিস্টেম (এন.এফ.এস.), এস.এম.বি. (ল্যান ব্যবস্থাপক/উইন্ডোজ),\n" "এবং এন.পি.সি. (নেটওয়ার) মাউন্ট অবস্থানকে মাউন্ট ও আনমাউন্ট করে।" #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "বুট হওয়ার সময় যে সব নেটওয়ার্ক ইন্টারফেস চালু করা হয়\n" "তাদের সকলকে সক্রিয়/নিষ্ক্রিয় করে।" # সাম #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS, TCP/IP নেটওয়ার্ক এর উপর ফাইল শেয়ার করার একটি জনপ্রিয় প্রোটকল।\n" "এই সার্ভিসটি NFS সার্ভারকে কর্মক্ষম করে, যা কিনা /etc/exports ফাইল দিয়ে\n" "কনফিগার করা হয়।" # সাম: functionality #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS, TCP/IP নেটওয়ার্ক এর উপর ফাইল শেয়ার করার একটি জনপ্রিয় প্রোটকল।\n" "এই সার্ভিসটি NFS ফাইল লকিং বৈশিষ্ট কর্মক্ষম করে।" # সাম #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "বুট এর সময়, console এবং Xorg এর অধীনে স্বয়ংক্রিয়ভাবে\n" "numlock কী লকার সক্রিয় করো।" #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "OKI 4w ও তার সাথে সংগতিপূর্ণ উইনপ্রিন্টার সমর্থন করে।" # সাম: # things = ডিভাইস? #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA সাপোর্ট সাধারণত ইথারনেট এবং ল্যাপটপের মোডেম জাতীয়\n" "ডিভাইস সমর্থন করে। এটি কনফিগার করা ছাড়া সক্রিয় হয় না, অতএব যেসব মেশিনে প্রয়োজন " "নেই\n" "সেখানেও এটি ইনস্টল করা যেতে পারে।" # সাম # portmap #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper টি RPC সংযোগ ব্যবস্থাপনায় নিয়োজিত, যটি NFS ও NIS এর\n" "মত প্রোটকলগুলোব্যবহার করে থাকে। যেসব মেশিন RPC পদ্ধতি ব্যবহার করে এমন প্রোটকলের\n" "সার্ভার হিসেবে কাজ করে, সেসব মেশিনে portmap সার্ভারটি চালু থাকতে হবে।" #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "পোস্টফিক্স একটি মেইল ট্রান্সপোর্ট এজেন্ট, এটি এমন একটি প্রোগ্রাম যা এক কম্পিউটার থেকে " "অন্য কম্পিউটারে মেইল স্থানান্তর করে।" # সাম #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "উন্নততর অনিয়মিত সংখ্যা উত্‍পাদনের জন্য সিস্টেম এনট্রোপি পুল সংরক্ষণ\n" "ও পুনরুদ্ধার করে। " # সাম #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Oracle বা DVD প্লেয়ার অ্যাপ্লিকেশন ব্যবহার করার জন্য, raw ডিভাইসগুলোকে ব্লক ডিভাইস" "(যেমন হার্ড ড্রাইভ পার্টিশনসমূহ) হিসেবে নির্দিষ্ট করে দিন।" # সাম # routed translated as রাউটেড #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "রাউটেড daemon টি স্বয়ংক্রিয় IP রাউটার টেবিল, RIP প্রোটকল দ্বারা আপডেট করতে " "সাহায্য করে। যদিও RIP প্রোটকল ছোট নেটওয়ার্কের জন্য বহুল ব্যবহৃত, জটিল নেটওয়ার্কের " "জন্য আরও জটিল রাউটিং প্রোটকল প্রয়োজন।" # সাম #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstat প্রোটোকলটি নেটওয়ার্ক ব্যবহারকারীদের ঐ নেটওয়ার্কে অবস্থিত\n" " যেকোন মেশিনের কার্যক্ষমতা সম্পর্কীয় পরিমাপকগুলো পেতে সাহায্য করে। " # সাম #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusers প্রোটকলটি নেটওয়ার্ক ব্যবহারকারীদের অন্যান্য সংযুক্ত মেশিনের\n" "লগকৃত ব্যবহারকারীদের সনাক্ত করতে সাহায্য করে।" # সাম # প্রোটকল #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "rwho প্রোটোকলটি রিমোট ব্যবহারকারীদেরকে, rwho daemon (finger এর মত) চালাচ্ছে এমন " "মেশিনে লগইন করা ব্যবহারকারীদের একটি তালিকা দেয়।" #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "আপনার কম্পিউটারের সাউন্ড সিস্টেম চালু করে" # সাম #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog ব্যবহার করে daemon সমূহ বিভিন্ন সিস্টেম লগ ফাইলে লগ বার্তা\n" "লিখে থাকে। অতএব, সবসময় Syslog চালিয়ে রাখা ভালো।" #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "ইউ.এস.বি. ডিভাইসের ড্রাইভার লোড করে।" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "এক্স ফন্ট সার্ভার চালু করে (Xorg চালানোর জন্য এটি বাধ্যতামূলক)।" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "বুট হওয়ার সময় যে সব সার্ভিস স্বয়ংক্রিয়ভাবে চালু হবে তাদের বেছে নিন" #: services.pm:127 #, c-format msgid "Printing" msgstr "প্রিন্টিং" #: services.pm:128 #, c-format msgid "Internet" msgstr "ইন্টারনেট" #: services.pm:131 #, c-format msgid "File sharing" msgstr "ফাইল শেয়ারকরণ" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "দূর-নিয়ন্ত্রিত অ্যাডমিনিস্ট্রেশন" #: services.pm:146 #, c-format msgid "Database Server" msgstr "ডেটাবেস সার্ভার" #: services.pm:209 #, c-format msgid "running" msgstr "চলন্ত" #: services.pm:209 #, c-format msgid "stopped" msgstr "স্থগিত" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "সার্ভিসসমূহ এবং ড্যেমনসমূহ" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "দুঃখিত, এই সার্ভিসটি সম্পর্কে\n" "অতিরিক্ত আর কোন তথ্য নেই।" #: services.pm:224 ugtk2.pm:1018 #, c-format msgid "Info" msgstr "তথ্য" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "অনুরোধের ভিত্তিতে সচল করো" #: services.pm:227 #, c-format msgid "On boot" msgstr "বুট করার সময় চালু করো" #: services.pm:244 standalone/drakroam:185 #, c-format msgid "Start" msgstr "আরম্ভ" #: services.pm:244 standalone/drakroam:186 #, c-format msgid "Stop" msgstr "বন্ধ" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandriva Linux?" msgstr "ম্যান্ড্রিব কলিনাক্স কি?" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandriva Linux!" msgstr "ম্যান্ড্রিব কলিনাক্স-এ আপনাকে স্বাগতম!" # সাম #: share/advertising/01.pl:17 #, c-format msgid "" "Mandriva Linux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" "Mandriva Linux একটি লিনাক্স ডিস্ট্রিবিউশন যা গঠিত হয়েছে সিস্টেম মূল অংশ বা " "অপারেটিং সিস্টেম (লিনাক্স কার্নেল এর উপর ভিত্তি করে) এবং বিভিন্ন অনেক " "অ্যাপ্লিকেশন দিয়ে যা কিনা আপনার সম্ভাব্য সব চাহিদা পূরন করে।" # সাম #: share/advertising/01.pl:19 #, c-format msgid "" "Mandriva Linux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" "Mandriva Linux আজকের সবচেয়ে ব্যবহারকারীর বন্ধুসূলভ লিনাক্স ডিস্ট্রিবিউশন। " "এটি পৃথিবীর সবচেয়ে বহুল-ব্যবহৃত লিনাক্স ডিস্ট্রিবিউশনের মধ্যে অন্যতম!" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "উন্মুক্ত সোর্স" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "উন্মুক্ত সোর্সের পৃথিবী তে স্বাগতম!" # sam # release = প্রকাশ? #: share/advertising/02.pl:17 #, c-format msgid "" "Mandriva Linux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandriva's team " "of developers and the worldwide community of Mandriva Linux " "contributors." msgstr "" "Mandriva Linux উন্মুক্ত সোর্স মডেলে প্রতিশ্রুতিবদ্ধ। এর অর্থ, এই নতুন রিলিজটি " "Mandriva এর ডেভেলপমেন্ট টিম এবং বিশ্বব্যাপী কমিউনিটির " "সহযোগিতার ফসল।" #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" "এই সর্বশেষ সংস্করণের উন্নয়ন প্রক্রিয়ায় যারা অংশগ্রহণ করেছেন তাদের প্রত্যেককে আমরা " "ধন্যবাদ জানাতে চাচ্ছি।" #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "জি-পি-এল" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the Mandriva " "Linux tools are licensed under the General Public License." msgstr "" "ডিস্ট্রিবিউশন এবং ম্যান্ড্রিব লিনাক্স টুলসমূহের বেশিরভাগ সফ্‌টওয়্যার General Public " "License এর অধীনে লাইসেন্সকৃত।" # সাম #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" "GPL হচ্ছে উন্মুক্ত সোর্স মডেলের মূল চালিকাশক্তি; এটি সকলকে একটি সফ্টওয়্যার ব্যবহার, " "নিরীক্ষণ, বিতরণ, এবং উন্নতি সাধন করার স্বাধীনতা দেবে, যদি তার ফল প্রকাশ " "করার প্রতিশ্রুতি দেয়া হয়।" # সাম #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" "এই পদ্ধতির প্রধান সুবিধা হল, ডেভেলপারের সংখ্যা কার্যত: অসীম, যার ফলাফল " "অতি উন্নত মানের সফ্টওয়্যার।" #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "কমিউনিটিতে যোগ দিন" # সাম #: share/advertising/04.pl:15 #, c-format msgid "" "Mandriva Linux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandriva Linux world." msgstr "" "Mandriva Linux এর আছে ব্যবহারকারী ও ডেভেলপারদের সবচেয়ে বড় কমিউনিটি " "গুলোর একটি। এই কমিউনিটির কার্যক্রমও অনেক বিস্তৃত, ত্রুটি রিপোর্ট করা থেকে নতুন " "অ্যাপলিকেশন তৈরী পর্যন্ত। এ কমিউনিটি Mandriva Linux এর ভুবনে অপরিহার্য ভুমিকা পালন " "করে।" # সাম #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrivalinux.com or directly www.mandrivalinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" "এই সক্রিয় কমিউনিটি সম্পর্কে আরও জানতে, দেখুন www.mandrivalinux.com " "অথবা সরাসরি www.mandrivalinux.com/en/cookerdevel.php3 যদি আপনি " "ডেভেলপমেন্টে সম্পৃক্ত হতে চান।" #: share/advertising/05.pl:15 #, c-format msgid "Download Version" msgstr "ডাউনলোড সংস্করণ" # সাম #: share/advertising/05.pl:17 #, c-format msgid "" "You are now installing Mandriva Linux Download. This is the free " "version that Mandriva wants to keep available to everyone." msgstr "" "আপনি এখন Mandriva Linux ডাউনলোড ইনস্টল করছেন। এটি একটি ফ্রী ভার্সন যা " "কিনা Mandriva সবার জন্য সহজলভ্য রাখতে চায়।" # সাম #: share/advertising/05.pl:19 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" "ডাউনলোড ভার্সনে উন্মুক্ত সোর্স নয় এমন সব সফ্টওয়্যার সংযোযিত নয়। অতএব আপনি " "ডাউনলোড ভার্সনে পাচ্ছেন না:" #: share/advertising/05.pl:20 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" "\t* প্রোপাইটারি ড্রাইভারসমূহ (যেমন NVIDIA®, ATI™, ইত্যাদির জন্য ড্রাইভার।)।" #: share/advertising/05.pl:21 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" "\t* প্রোপাইটারি সফ্‌টওয়্যার (যেমন Acrobat® Reader®, RealPlayer®, Flash™, " "ইত্যাদি।)।" # সাম #: share/advertising/05.pl:23 #, c-format msgid "" "You will not have access to the services included in the other " "Mandriva products either." msgstr "" "অনান্য Mandriva পণ্যেও সংযোজিত সার্ভিসগুলো আপনি ব্যবহার করতে পারবেন না।" #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "আবিষ্কার করুন, আপনার প্রথম লিনাক্স ডেস্কটপ" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandriva Linux Discovery." msgstr "আপনি এখন ম্যান্ড্রিব লিনাস্ক আবিষ্কার ইনস্টল করছেন।" # সাম: # task-oriented = ? #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" "Discovery হচ্ছে সবচেয়ে সহজ এবং ব্যবহারকারীর বন্ধুসূলভ লিনাক্স " "ডিস্ট্রিবিউশন। এটিতে আছে অফিস, মাল্টিমিডিয়া এবং ইন্টারনেট কর্মকান্ডে ব্যবহারের জন্য " "বাছাইকৃত কিছু মানসম্মত সফ্টওয়্যার। এর মেনু task-oriented, প্রতিটি টাস্কের জন্য " "একটি অ্যাপ্লিকেশন।" #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "পাওয়ারপ্যাক, চূড়ান্ত লিনাক্স ডেস্কটপ" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandriva Linux PowerPack." msgstr "আপনি এখন ম্যান্ড্রিব লিনাক্স পাওয়ারপ্যাক ইনস্টল করছেন।" # সাম # premier? #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandriva's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" "PowerPack হচ্ছে Mandriva এর premier লিনাক্স ডেস্কটপ পণ্য। PowerPack এ আছে " "হাজারেরও অধিক অ্যাপ্লিকেশন - সবচেয়ে জনপ্রিয় থেকে শুরু করে সবচেয়ে উন্নত " "পর্যন্ত।" #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "পাওয়ারপ্যাক+, ডেস্কটপ এবং সার্ভারের জন্য লিনাক্স সমাধান" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandriva Linux PowerPack+." msgstr "আপনি এখন ম্যান্ড্রিব লিনাক্স পাওয়ারপ্যা++ ইনস্টল করছেন।" # সাম # full-featured = বৈশিষ্টপূর্ণ? #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" "PowerPack+ ছোট থেকে মধ্যম সাইজের নেটওয়ার্কের জন্য একটি বৈশিষ্টপূর্ণ " "লিনাক্স সমাধান। PowerPack+ এ আছে হাজারেরও অধিক ডেস্কটপ অ্যাপ্লিকেশন " "এবং কিছু অতি উন্নত সমন্বিত সার্ভার অ্যাপ্লিকেশন।" # সাম: Mandriva #: share/advertising/09.pl:13 #, c-format msgid "Mandriva Products" msgstr "Mandriva পণ্যসমূহ" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandriva has developed a wide range of Mandriva Linux products." msgstr "ম্যান্ড্রিব সফ্‌ট ম্যান্ড্রিব লিনাক্স প্রচুর প্রোডাক্ট তৈরী করেছে।" # সাম #: share/advertising/09.pl:17 #, c-format msgid "The Mandriva Linux products are:" msgstr "Mandriva Linux এর পণ্যসমূহ হলো:" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "\t* আবিষ্কার, আপনার প্রথম লিনাক্স ডেস্কটপ।" #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "\t* পাওয়ারপ্যাক, চূড়ান্ত লিনাক্স ডেস্কটপ।" #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "\t* পাওয়ারপ্যাক+, ডেস্কটপ এবং সার্ভারের জন্য লিনাক্স সমাধান." # সাম #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandriva Linux for x86-64, The Mandriva Linux solution for making " "the most of your 64-bit processor." msgstr "" "\t* x86-64 এর জন্য Mandriva Linux, আপনার ৬৪‌-বিট প্রোসেসরের সব সম্ভবনাকে " "কাজে লাগানোর Mandriva Linux সমাধান। " # সাম #: share/advertising/10.pl:15 #, c-format msgid "Mandriva Products (Nomad Products)" msgstr "Mandriva পণ্যসমূহ (Nomad পণ্যসমূহ)" # সাম #: share/advertising/10.pl:17 #, c-format msgid "" "Mandriva has developed two products that allow you to use Mandriva Linux " "on any computer and without any need to actually install it:" msgstr "" "Mandriva দুটি পণ্য তৈরী করেছে যা আপনাকে ইনস্টল করা ছাড়াই যেকোন কম্পিউটারে " "Mandriva Linux ব্যবহার করার সুযোগ দেবে। " # সাম # bootable = ? #: share/advertising/10.pl:18 #, c-format msgid "" "\t* Move, a Mandriva Linux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" "\t* মুভ, একটি Mandriva Linux ডিস্ট্রিবিউশন সম্পূর্ণভাবে একটি বুট CD-ROM থেকে " "চলতে পারে।" # সাম: ultra-compact = ? #: share/advertising/10.pl:19 #, c-format msgid "" "\t* GlobeTrotter, a Mandriva Linux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" "\t* GlobeTrotter, একটি Mandriva Linux ডিস্ট্রিবিউশন যা কিনা আলট্রা‌-" "কমপ্যাক্ট “LaCie মোবাইল হার্ড ড্রাইভ” এ পূর্ব-ইনস্টলকৃত।" #: share/advertising/11.pl:13 #, c-format msgid "Mandriva Products (Professional Solutions)" msgstr "ম্যান্ড্রিব সফ্‌ট প্রোডাক্টসমূহ (পেশাদারী সমাধান)" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandriva products designed to meet the professional needs:" msgstr "" "নিচের ম্যান্ড্রিব সফ্‌ট প্রোডাক্টসমূহ পেশাদারী প্রয়োজন মেটানোর জন্য ডিজাইন করা " "হয়েছে:" # সাম: Corporate = প্রাতিষ্ঠানিক লিখলাম...সিওর না। #: share/advertising/11.pl:16 #, c-format msgid "" "\t* Corporate Desktop, The Mandriva Linux Desktop for Businesses." msgstr "" "\t* কর্পোরেট ডেস্কটপ, ব্যবসা প্রতিষ্ঠানের উপযুক্ত Mandriva Linux ডেস্কটপ।" # সাম # প্রাতিষ্ঠানিক #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandriva Linux Server Solution." msgstr "\t* কর্পোরেট সার্ভার, Mandriva Linux সার্ভার সমাধান।" # সাম #: share/advertising/11.pl:18 #, c-format msgid "" "\t* Multi-Network Firewall, The Mandriva Linux Security Solution." msgstr "\t* একাধিক-নেটওয়ার্ক ফায়ারওয়াল, Mandriva Linux নিরাপত্তা সমাধান।" #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "কে-ডি-ই'র পছন্দ" # ব্যবহারকারীর বন্ধুসূলভ # ডেস্কটপ পরিবেশ #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" "Discovery এর মাধ্যমে আপনি পরিচিত হবেন KDE এর সাথে, যটি সবচেয়ে উন্নত এবং " "ব্যবহারকারী বন্ধুসূলভ গ্রাফিক্যাল ডেস্কটপ পরিবেশ।" # সাম: :P #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" "KDE আপনার Linux প্রশিক্ষণের প্রথম ধাপগুলো এত সহজ করে তুলবে যে আপনি অন্য কোন " "অপারেটিং সিস্টেমের কথা চিন্তাই করবেন না!" # সাম #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" "KDE তে আরও আছে অনেক সমন্বিত অ্যাপ্লিকেশন, যেমন ওয়েব ব্রাউজার Konqueror, " "এবং ব্যক্তিগত তথ্য ব্যবস্থাপক Kontact।" # সাম: প্রতিবেশ = পরিবেশ। # ডেস্কটপ পরিবেশ doesn't sound good. #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "আপনার পছন্দনীয় ডেস্কটপ পরিবেশ বেছে নিন" # সাম # ডেস্কটপ পরিবেশ #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandriva has chosen KDE as the default one." msgstr "" "PowerPack এর মাধ্যমে আপনি আপনার পচ্ছন্দ অনুযায়ী গ্রাফিক্যাল ডেস্কটপ পরিবেশ " "বেছে নিতে পারবেন। Mandriva এর জন্য ডিফল্ট KDE। " # সাম # ব্যবহারকারীর বন্ধুসূলভ # ডেস্কটপ পরিবেশ #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" "KDE হচ্ছে সবচেয়ে উন্নত এবং ব্যবহারকারী বন্ধুসূলভ গ্রাফিক্যাল ডেস্কটপ " "পরিবেশ। এতে অনেক সমন্বিত অ্যাপ্লিকেশনসমূহ আছে।" # সাম #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" "কিন্তু আমাদের মতে আপনি সবগুলোই ব্যবহার করে দেখুন (যেমন GNOME, IceWM " "ইত্যাদি) এবং আপনার পচ্ছন্দেরটি বেছে নিন।" # ডেস্কটপ পরিবেশ #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandriva has chosen KDE as the default one." msgstr "" "PowerPack এর মাধ্যমে আপনি আপনার পচ্ছনুযায়ী গ্রাফিক্যাল ডেস্কটপ পরিবেশ বেছে " "নিতে পারবেন। Mandriva এর জন্য ডিফল্ট হচ্ছে KDE। " #: share/advertising/14.pl:15 #, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org" #: share/advertising/14.pl:17 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "আবিষ্কারের সাথে সাথে, আপনি OpenOffice.org আবিষ্কার করবেন।" # সাম #: share/advertising/14.pl:19 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" "এটি একটি সম্পূর্ণ office suite যাতে ওয়ার্ড প্রোসেসর, স্প্রেডশীট, প্রেজেন্টেশন " "এবং অংকন সফ্টওয়্যারসমূহ রয়েছে।" # সাম #: share/advertising/14.pl:21 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" "OpenOffice.org প্রায় সব ধরনের Microsoft® Office ডকুমেন্ট পড়তে ও তৈরী " "করতে পারে, যেমন Word, Excel এবং PowerPoint® ফাইলসমূহ।" #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Kontact" # সাম #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" "Discovery তে সংযোজিত আছে Kontact, নতুন KDE গ্রুপওয়্যার সমাধান।" # সাম # address book # বৈশিষ্টপূর্ণ #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" "একটি বৈশিষ্টপূর্ণ ই‌মেইল ক্লায়েন্ট ছাড়াও, Kontact এ আছে অ্যাড্রেস বুক, " "একটি ক্যালেন্ডার, এবং একটি নোট নেবার টুল!" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" "এটি হচ্ছে আপনার সম্পর্কিত লোকদের সাথে যোগাযোগের এবং আপনার সময় ঘুছিয়ে রাখার সহজতম " "পন্থা।" #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "ইন্টারনেট সার্ফ করুন" # সাম: resource is translated elsewhere as রিসোর্স #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "Discovery আপনাকে দেবে প্রতিটি ইন্টারনেট রিসোর্সব্যবহারের সুবিধা: " #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "\t* Konqueror দিয়ে ওয়েব ব্রাউজ করুন।" #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "\t* Kopete ব্যবহার করে অনলাইনে আপনার বন্ধুদের সাথে চ্যাট করুন।" #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "\t* KBear দিয়ে ফাইল আদান-প্রদান করুন।" #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "\t* ..." #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "আমাদের মাল্টিমিডিয়া সুবিধাগুলো উপভোগ করুন" # সাম #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "Discovery আপনার জন্য মাল্টিমিডিয়া আরও সহজ করে তুলবে:" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "\t* Kaffeine দিয়ে আপনার প্রিয় ভিডিওসমূহ দেখুন।" #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "\t* amaroK দিয়ে আপনার গানের ফাইলগুলো শুনুন।" #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* GIMP দিয়ে ছবিসমূহ সম্পাদনা এবং তৈরী করুন।" #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "অ্যাপ্লিকেশনের বিশাল সীমা উপভোগ করুন" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandriva Linux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" "ম্যান্ড্রিব লিনাক্স মেনু'তে আপনার সকল কাজসমূহ এর জন্য আপনি সহজে-ব্যবহার্য এপ্লিকেশনসমূহ খুঁজে পাবেন:" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "" "\t* OpenOffice.org দিয়ে অফিস ডকুমেন্টগুলো তৈরী, সম্পাদনা এবং শেয়ার করুন।" # সাম: personal information suites = ? #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" "\t* আপনার ব্যক্তিগত তথ্য Kontact এবং Evolution এর মত সমন্বিত " "personal information suite দিয়ে রক্ষণাবেক্ষন করুন।" #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "\t* Mozilla এবং Konqueror দিয়ে ওয়েব ব্রাউজ করুন।" #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "\t* Kopete দিয়ে অনলাইন চ্যাটে অংশগ্রহণ করুন।" #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" "\t* আপনার অডিও সিডি এবং গানের ফাইল শুনুন, আপনার ভিডিওসমূহ " "দেখুন।" #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* GIMP দিয়ে ছবিসমূহ সম্পাদনা এবং তৈরী করুন।" #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "উন্নয়ন এর পরিবেশ" # সাম #: share/advertising/19.pl:15 share/advertising/22.pl:17 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "PowerPack আপনাকে দিচ্ছে আ্যপলিকেশন ডেভেলপ এর সর্বোত্তম সরঞ্জাম।" # সাম # সমন্বিত অ্যাপ্লিকেশন #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" "আপনি KDE এর শক্তিশালী ও সমন্বিত ডেভেলপমেন্ট পরিবেশ KDevelop উপভোগ করবেন, " "যেটি আপনাকে বিভিন্ন অনেক ভাষায় প্রোগ্রাম করার সুযোগ দেবে।" # সাম #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" "PowerPack এর সাথে আরও পেতে পারেন GCC, Linux এর প্রধান কমপাইলার এবং " "GDB, এর সংশ্লিষ্ট ডিবাগার।" # সাম: Development = ? পরিবর্ধন, উন্নয়ন # সফ্টওয়্যার তৈরী সম্পাদক #: share/advertising/20.pl:13 #, c-format msgid "Development Editors" msgstr "ডেভেলপমেন্ট এডিটর সমুহ" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "PowerPack আপনাকে জনপ্রিয় এডিটরগুলো বেছে নেয়ার সুযোগ দেবে:" # সাম: real time = ? #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "\t* Emacs: একটি স্বনির্বাচিত এবং রিয়েল টাইম ডিসপ্লে এডিটর।" # সাম #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" "\t* XEmacs: আরও একটি উন্মুক্ত সোর্স টেক্সট এডিটর এবং অ্যাপলিকেশন তৈরী " "সিস্টেম।" # সাম #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" "\t* Vim: সাধারণ Vi এর চেয়ে বেশি সুবিধা সম্পন্ন একটি উন্নত টেক্সট এডিটর।" # সাম #: share/advertising/21.pl:15 #, c-format msgid "Development Languages" msgstr "ডেভেলপমেন্ট এর ভাষাসমূহ" # সাম #: share/advertising/21.pl:17 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" "এসব শক্তিশালী টুল দিয়ে, আপনি ডজন খানেক প্রোগ্রামিং ভাষায় অ্যাপ্লিকেশন " "লিখতে পারবেন:" #: share/advertising/21.pl:18 #, c-format msgid "\t* The famous C language." msgstr "\t* জনপ্রিয় সি ভাষা" #: share/advertising/21.pl:19 #, c-format msgid "\t* Object oriented languages:" msgstr "\t* অবজেক্ট ওরিয়েন্টেড ভাষা:" #: share/advertising/21.pl:20 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Java™" msgstr "\t\t* জাভা (Java™)" #: share/advertising/21.pl:22 #, c-format msgid "\t* Scripting languages:" msgstr "\t* স্ক্রিপ্টিং ভাষাসমূহ:" #: share/advertising/21.pl:23 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:24 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:25 share/advertising/28.pl:24 #, c-format msgid "\t* And many more." msgstr "\t* আরও অনেক কিছু।" # সাম: Development ? #: share/advertising/22.pl:15 #, c-format msgid "Development Tools" msgstr "ডেভেলপমেন্ট টুল" # সাম # সমন্বিত অ্যাপ্লিকেশন #: share/advertising/22.pl:19 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" "সমন্বিত ডেভেলপমেন্ট পরিবেশ KDevelop এবং প্রধান লিনাক্স কম্পাইলার GCC দিয়ে আপনি বিভিন্ন অনেক ভাষায় অ্যাপ্লিকেশন তৈরী করতে পারবেন (C, C++, " "Java™, Perl, Python ইত্যাদি)।" #: share/advertising/23.pl:13 #, c-format msgid "Groupware Server" msgstr "গ্রুপওয়্যার সার্ভার" # সাম # বৈশিষ্টপূর্ণ #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" "PowerPack+ মাধ্যমে আপনি বৈশিষ্টপূর্ণ গ্রুপওয়্যার সার্ভার Kolab " "ব্যবহারের সুযোগ পাবেন। এর অনেকটা কৃতিত্ব Kontact ক্লায়েন্টের, এবং এটি দিয়ে " "আপনি পারছেন:" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "\t* আপনার ই-মেইলসমূহ পাঠান এবং গ্রহণ করুন।" #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "\t* আপনার এজেন্ডাসমূহ এবং আপনার ঠিকানার বইসমূহ শেয়ার করুন।" #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "\t* আপনার মেমোসমূহ এবং কার্যতালিকাসমূহ ম্যানেজ করুন।" #: share/advertising/24.pl:15 #, c-format msgid "Servers" msgstr "সার্ভার" #: share/advertising/24.pl:17 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" "আপনার ব্যবসায়িক নেটওয়ার্ককে প্রিমিয়ার সার্ভার সলুশন দিয়ে সজ্জিত করুন; এতে " "রয়েছে:" #: share/advertising/24.pl:18 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" "\t* Samba: মাইক্রোসফ্‌ট® উইন্ডোজ® ক্লায়েন্টদের জন্য ফাইল এবং প্রিন্ট সার্ভিস।" #: share/advertising/24.pl:19 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "\t* Apache: সর্বাপেক্ষা বেশি ব্যবহৃত ওয়েব সার্ভার।" #: share/advertising/24.pl:20 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" "\t* MySQL এবং PostgreSQL: পৃথিবীর সর্বাপেক্ষা জনপ্রিয়তম উন্মুক্ত " "সোর্সের ডাটাবেজসমূহ।" # সাম: Concurrent = সমবর্তী? #: share/advertising/24.pl:21 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" "\t* CVS: কনকারেন্ট ভার্সন সিস্টেম, প্রধান উন্মুক্ত সোর্স নেটওয়ার্ক‌-স্বচ্ছ ভার্সন " "নিয়ন্ত্রণ সিস্টেম।" #: share/advertising/24.pl:22 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" "\t* ProFTPD: উচ্চ কন্‌ফিগারকৃত জি-পি-এল লাইসেন্সপ্রাপ্ত এফ-টি-পি সার্ভার " "সফ্‌টওয়্যার।" #: share/advertising/24.pl:23 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" "\t* Postfix এবং Sendmail: জনপ্রিয় এবং শক্তিশালী মেইল সার্ভার।" #: share/advertising/25.pl:13 #, c-format msgid "Mandriva Linux Control Center" msgstr "ম্যান্ড্রিব -লিনাক্স নিয়ন্ত্রণ কেন্দ্র" # সাম # নিয়ন্ত্রণ কেন্দ্র #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandriva Linux Control Center is an essential collection of " "Mandriva Linux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" "Mandriva Linux নিয়ন্ত্রণ কেন্দ্র একটি Mandriva Linux-সম্পর্কিত মৌলিক " "ইউটিলিটির সমষ্টি যা কিনা আপনার কম্পিউটারের কনফিগারেশন সহজ করে তোলে। " # সাম # নিরাপত্তা স্তর #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" "আপনি আপনার সিস্টেম সহজে কনফিগার করার জন্য এই ৬০ এর অধিক দরকারী " "ইউটিলিটির এই কালেকশনটির সুবিধা সাথে সাথে উপলব্ধি করতে পারবেন: আপনার কম্পিউটারের " "হার্ডওয়্যার ডিভাইস, মাউন্ট পয়েন্ট, নেটওয়ার্ক এবং ইন্টারনেট, নিরাপত্তা স্তর, " "ইত্যাদি। " #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "উন্মুক্ত সোর্সের মডেল" # সাম #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandriva sells added value products and services to keep improving " "Mandriva Linux. If you want to support the open source philosophy " "and the development of Mandriva Linux, please consider buying one of " "our products or services!" msgstr "" "সব কম্পিউটার প্রোগ্রামিং এর মতই, উন্মুক্ত সোর্স সফ্টওয়্যার ডেভেলপমেন্টেও প্রয়োজন সময় " "এবং লোকবল। উন্মুক্ত সোর্স ধারনাটির সমর্থনে এবং Mandriva Linux উন্নততর করার " "উদ্দেশ্যে Mandriva মূল্য সংযোজিত পণ্য ও সেবা বিক্রয় করে থাকে। আপনি যদি এই " "প্রচেষ্টায় সাহায্য করতে চান তবে অনুগ্রহ করে আমাদের যেকোন পণ্য বা সেবা ক্রয় " "করুন!" # সাম: নাকি স্টোর? #: share/advertising/27.pl:13 #, c-format msgid "Online Store" msgstr "অনলাইন বিপনীকেন্দ্র" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandriva products and services, you can visit our e-" "commerce platform." msgstr "" "ম্যনড্রেকসফ্‌টের প্রোডাক্টসমূহ এবং সার্ভিস সম্বন্ধে জ্ঞানার্জনের জন্য, আপনি আমাদের ই-" "কমার্স প্লাটফর্ম এ ঘুরে আসতে পারেন।" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" "যেখানে আপনি আপনার সকল প্রোডাক্ট, সার্ভিস এবং ৩য়-পার্টির প্রোডাক্টসমূহের পেতে পারেন।" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" "এই প্লাটফর্মটি এর দ্রুততা এবং ব্যবহার যোগ্যতা বাড়ানোর জন্য পুনরায় ডিজাইন করাহয়েছে।" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandriva.com!" msgstr "আজ store.mandriva.com এ থেমে যান!" #: share/advertising/28.pl:15 #, c-format msgid "Mandriva Club" msgstr "ম্যান্ড্রিব ক্লাব" #: share/advertising/28.pl:17 #, c-format msgid "" "Mandriva Club is the perfect companion to your Mandriva Linux " "product.." msgstr "" "ম্যান্ড্রিব ক্লাব আপনার ম্যান্ড্রিব লিনাক্স প্রোডাক্টের সঠিক সংগী.." #: share/advertising/28.pl:19 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandriva Club, such as:" msgstr "ম্যান্ড্রিব ক্লাবে যোগ দিয়ে মূল্যবান উপকারসমূহের সুবিধা নিন, যেমন:" #: share/advertising/28.pl:20 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandriva.com." msgstr "" "\t* আমাদের অনলাইন store.mandriva.com স্টোরের প্রোডাক্টসমূহ এবং " "সার্ভিসসমূহেবিশেষ মূল্যহ্রাস।" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" "\t* বাণিজ্যিক অ্যাপ্লিকেশনএ প্রবেশ (উদাহরণস্বরুপ NVIDIA® বা ATI™ ড্রাইভারসমূহ)" "।" #: share/advertising/28.pl:22 #, c-format msgid "\t* Participation in Mandriva Linux user forums." msgstr "\t* ম্যান্ড্রিব লিনাক্স ব্যবহারকারীদের ফোরাম এ অংশগ্রহণ।" # সাম #: share/advertising/28.pl:23 #, c-format msgid "" "\t* Early and privileged access, before public release, to Mandriva " "Linux ISO images." msgstr "" "\t* Mandriva Linux ISO ইমেজগুলো, নির্ধারিত সময়ের পূর্বেই, পাওয়ার " "বিশেষ সুবিধা।" #: share/advertising/29.pl:13 #, c-format msgid "Mandriva Online" msgstr "ম্যান্ড্রিব অনলাইন (Mandriva Online)" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandriva Online is a new premium service that Mandriva is proud to " "offer its customers!" msgstr "" "ম্যান্ড্রিব অনলাইন হচ্ছে একটি নতুন প্রিমিয়াম সার্ভিস যা ম্যান্ড্রিব সফ্‌ট তার " "ক্রেতাদের দিতে পেরে গর্বিত!" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandriva Online provides a wide range of valuable services for easily " "updating your Mandriva Linux systems:" msgstr "" "ম্যান্ড্রিব অনলাইন আপনার ম্যান্ড্রিব লিনাক্স সিস্টেমের জন্য সহজে আপডেট এর জন্য " "বিশাল সীমানার গুরুত্বপূর্ণ সার্ভিস:" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "\t* সঠিক সিস্টেম নিরাপত্তা (স্বয়ংক্রিয় সফ্‌টওয়্যার আপডেট)।" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" "\t* আপডেটের বিজ্ঞপ্তিপত্র (ই-মেইলের মাধ্যমে বা ডেস্কটপের কোন একটি " "অ্যাপলেটের মাধ্যমে)।" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "\t* নমনীয় রুটিনমাফিক আপডেটসমূহ।" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandriva Linux systems with one account." msgstr "" "\t* একটি অ্যাকাউন্ট দিয়ে আপনার সম্পূর্ণ ম্যান্ড্রিব লিনাক্স সিস্টেমের " "ম্যানেজমেন্ট।" #: share/advertising/30.pl:13 #, c-format msgid "Mandriva Expert" msgstr "Mandriva Expert" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandriva's technical experts on " "our technical support platform www.mandrivaexpert.com." msgstr "" "আপনার কি কোন সহযোগিতা প্রয়োজন? www.mandrivaexpert.com এর আমাদের " "প্রযুক্তিগত সহায়তা প্লাটফর্ম এ ম্যান্ড্রিব সফ্‌টের অভিজ্ঞ প্রযুক্তিবিদদের সাথে যোগাযোগ " "করুন।" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandriva Linux experts, you will save " "a lot of time." msgstr "" "যোগ্যতাসম্পন্ন অভিজ্ঞ ম্যান্ড্রিব লিনাক্স ব্যবহারকারীদের সাহায্যের জন্য ধন্যবাদ, " "আপনি অনেক সময় রক্ষা করবেন।" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandriva Linux, you have the possibility to " "purchase support incidents at store.mandriva.com." msgstr "" "ম্যান্ড্রিব লিনাক্স সম্পর্কিত কোন প্রশ্নের জন্য, আপনাকে store.mandriva.com " "থেকে সকল প্রকার সহায়তা নিতে হবে।" #: share/compssUsers.pl:26 #, c-format msgid "Office Workstation" msgstr "অফিস ওয়ার্কষ্টেশন" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "অফিস প্রোগ্রামসমূহ: ওয়ার্ডপ্রসেসর (OpenOffice.org Writer, Kword), স্প্রেডসিট " "(OpenOffice.org Calc, Kspread), PDF ফাইল প্রদর্শক ইত্যাদী" #: share/compssUsers.pl:29 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "অফিস প্রোগ্রামসমূহ: ওয়ার্ডপ্রসেসর (kword, abiword), স্প্রেডসিট (kspread, gnumeric), " "PDF ফাইল প্রদর্শক ইত্যাদী" #: share/compssUsers.pl:34 #, c-format msgid "Game station" msgstr "গেশ ষ্টেশন" #: share/compssUsers.pl:35 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "উদ্দীপনামূলক প্রোগ্রামসমূহ: আর্কেড, বোর্ড, স্ট্রেটেজি, ইত্যাদি" #: share/compssUsers.pl:38 #, c-format msgid "Multimedia station" msgstr "মাল্টিমিডিয়া ষ্টেশন" #: share/compssUsers.pl:39 #, c-format msgid "Sound and video playing/editing programs" msgstr "সাউন্ড এবং ভিডিও দেখার/এডিট করার প্রোগ্রামসমূহ" #: share/compssUsers.pl:44 #, c-format msgid "Internet station" msgstr "ইন্টারনেট ষ্টেশন" #: share/compssUsers.pl:45 #, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "মেইল আদানপ্রদান, খবর পড়া এবং ওয়েব ব্রাউজিং (mutt, tin..) এর জন্য কিছু টুলের সেট" #: share/compssUsers.pl:50 #, c-format msgid "Network Computer (client)" msgstr "নেটওয়ার্ক কম্পিউটার (ক্লাইন্ট)" #: share/compssUsers.pl:51 #, c-format msgid "Clients for different protocols including ssh" msgstr "SSH সহ বিভিন্ন প্রোটকলের জন্য ক্লাইন্টসমূহ" #: share/compssUsers.pl:55 #, c-format msgid "Configuration" msgstr "কনফিগারেশন" #: share/compssUsers.pl:56 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "আপনার কম্পিউটারের কনফিগারেশন সহজ করার জন্য কিছু টুল" #: share/compssUsers.pl:60 #, c-format msgid "Console Tools" msgstr "কনসল টুল" #: share/compssUsers.pl:61 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "এডিটর, শেল, ফাইল টুল, টার্মিনাল সমূহ" #: share/compssUsers.pl:66 share/compssUsers.pl:170 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "C এবং C++ ডেভলপমেন্টের লাইব্রেরী, প্রগ্রাম এবং include ফাইলসমূহ" #: share/compssUsers.pl:70 share/compssUsers.pl:174 #, c-format msgid "Documentation" msgstr "ডকুমেন্টেশন" #: share/compssUsers.pl:71 share/compssUsers.pl:175 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "লিনাক্স এবং ফ্রী সফটওয়ার সংক্রান্ত বই ও হাউটু (HOWTO)" #: share/compssUsers.pl:75 share/compssUsers.pl:178 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:76 share/compssUsers.pl:179 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "লিনাক্সের সাধারণ আধার। তৃতীয়পক্ষ এপ্লিকেশন সমূহের সাপোর্ট" #: share/compssUsers.pl:86 #, c-format msgid "Apache" msgstr "এ্যপাচি" #: share/compssUsers.pl:89 #, c-format msgid "Groupware" msgstr "গ্রুপওয়্যার" #: share/compssUsers.pl:90 #, c-format msgid "Kolab Server" msgstr "Kolab সার্ভার" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Firewall/Router" msgstr "ফায়ারওয়াল/রাউটার" #: share/compssUsers.pl:94 share/compssUsers.pl:135 #, c-format msgid "Internet gateway" msgstr "ইন্টারনেট গেটওয়ে" # সাম #: share/compssUsers.pl:97 #, c-format msgid "Mail/News" msgstr "মেইল/সংবাদ" # সাম #: share/compssUsers.pl:98 #, c-format msgid "Postfix mail server, Inn news server" msgstr "Postfix মেইল সার্ভার, Inn সংবাদ সার্ভার" # সাম #: share/compssUsers.pl:101 #, c-format msgid "Directory Server" msgstr "ডিরেক্টরি সার্ভার" #: share/compssUsers.pl:105 #, c-format msgid "FTP Server" msgstr "FTP সার্ভার" # সাম #: share/compssUsers.pl:106 #, c-format msgid "ProFTPd" msgstr "ProFTPd" # সাম #: share/compssUsers.pl:109 #, c-format msgid "DNS/NIS" msgstr "ডিএনএস/এনআইএস" # sam #: share/compssUsers.pl:110 #, c-format msgid "Domain Name and Network Information Server" msgstr "ডোমেইন নেম এবং নেটওয়ার্ক ইনফরমেশন সার্ভার" # sam: 'sharing' is kept as it is because this is the server name. #: share/compssUsers.pl:113 #, c-format msgid "File and Printer Sharing Server" msgstr "ফাইল এবং প্রিন্টার শেয়ারিং সার্ভার" # sam #: share/compssUsers.pl:114 #, c-format msgid "NFS Server, Samba server" msgstr "NFS সার্ভার, Samba সার্ভার" #: share/compssUsers.pl:117 share/compssUsers.pl:130 #, c-format msgid "Database" msgstr "ডেটাবেস" #: share/compssUsers.pl:118 #, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "PostgreSQL অথবা MySQL ডেটাবেস সার্ভার" #: share/compssUsers.pl:122 #, c-format msgid "Web/FTP" msgstr "ওয়েব/FTP" #: share/compssUsers.pl:123 #, c-format msgid "Apache, Pro-ftpd" msgstr "এ্যপাচি, Pro-ftpd" #: share/compssUsers.pl:126 #, c-format msgid "Mail" msgstr "মেইল" #: share/compssUsers.pl:127 #, c-format msgid "Postfix mail server" msgstr "Postfix মেইল সার্ভার" #: share/compssUsers.pl:131 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL অথবা MySQL ডেটাবেস সার্ভার" #: share/compssUsers.pl:138 #, c-format msgid "Network Computer server" msgstr "নেটওয়ার্ক কম্পিউটার সার্ভার" #: share/compssUsers.pl:139 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS সার্ভার, SMB সার্ভার, Proxy সার্ভার, ssh সার্ভার" #: share/compssUsers.pl:147 #, c-format msgid "KDE Workstation" msgstr "KDE ওয়ার্কষ্টেশন" #: share/compssUsers.pl:148 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "K ডেক্সটপ, কিছু সহযোগীমূলক টুলের সমন্বয়ে একটি সাধারণ গ্রাফিকাল পরিবেশ" #: share/compssUsers.pl:152 #, c-format msgid "GNOME Workstation" msgstr "গুহনোম ওয়ার্কষ্টেশন" #: share/compssUsers.pl:153 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "ব্যবহারকারীর বন্ধুসূলভ কিছু এপ্লিকেশন এবং ডোক্সটপ টুলের সমন্বয়ে একটি গ্রাফিকাল পরিবেশ" #: share/compssUsers.pl:156 #, fuzzy, c-format msgid "IceWm Desktop" msgstr "প্লাকার ডেস্কটপ" #: share/compssUsers.pl:160 #, c-format msgid "Other Graphical Desktops" msgstr "অন্যান্য গ্রাফিকাল ডেক্সটপ" #: share/compssUsers.pl:161 #, fuzzy, c-format msgid "Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ইত্যাদী" # sam #: share/compssUsers.pl:184 #, c-format msgid "Utilities" msgstr "ইউটিলিটিসমূহ" #: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "SSH সার্ভিস" # sam #: share/compssUsers.pl:191 #, c-format msgid "Webmin" msgstr "ওয়েবমিন" # sam #: share/compssUsers.pl:192 #, c-format msgid "Webmin Remote Configuration Server" msgstr "ওয়েবমিন দূরবর্তী কনফিগারেশন সার্ভার" # sam #: share/compssUsers.pl:196 #, c-format msgid "Network Utilities/Monitoring" msgstr "নেটওয়ার্ক ইউটিলিটিসমূহ/পর্যবেক্ষণ" # সাম: context is not clear #: share/compssUsers.pl:197 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "পর্যবেক্ষণ টুলসমূহ, হিসাবরক্ষণ প্রসেস করে, tcpdump, nmap, ..." # সাম #: share/compssUsers.pl:201 #, c-format msgid "Mandriva Wizards" msgstr "Mandriva উইজার্ডসমূহ" # সাম #: share/compssUsers.pl:202 #, c-format msgid "Wizards to configure server" msgstr "সার্ভার কনফিগার করার জন্য উইজার্ডসমূহ" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "এটি একটি ফ্রী সফটওয়ার; ফ্রী সফটওয়ার ফাউন্ডেশন কর্তৃক প্রকাশিত জী-এন-ইউ জেনারেল " "পাবলিক লাইসেন্স-এর ২য় বা পরবর্তী\n" "কোন সংস্করণের (এটি আপনার ইচ্ছাধীন) শর্তাবলী অনুসরণ করে একে আপনি পুনঃবিতরণ এবং/" "অথবা পরিবর্তন করতে পারবেন।\n" "\n" "প্রোগ্রামটি এই আশায় বিতরণ করা হচ্ছে যে, এটি আপনার উপকারে আসবে, যদিও এ ব্যাপারে " "কোন নিশ্চয়তা প্রদান করা হচ্ছে না;\n" "এমনকি ক্রয়-বিক্রয় বা কোন বিশেষ কাজের ক্ষেত্রে প্রোগ্রামটির উপযুক্ততার ব্যাপারেও কোন " "নিশ্চয়তা প্রদান করা হচ্ছে না।\n" "বিস্তারিত জানার জন্য জী-এন-ইউ জেনারেল পাবলিক লাইসেন্স দেখুন।\n" "\n" "এই প্রোগ্রামের সাথে গনিউ জেনারেল পাবলিক লাইসেন্সের একটি প্রতিলিপি আপনার পাওয়ার " "কথা; কোন কারণে যদি তা না পেয়ে থাকেন, তবে এই ঠিকানায় লিখুন - Free Software " "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" # সাম # পুনরুদ্ধার #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "ব্যাকআপ ও পুনরুদ্ধার অ্যাপ্লিকেশন\n" "\n" "--default : ডিফল্ট ডিরেক্টরি সংরক্ষণ করো।\n" "--debug : সব ডিবাগ বার্তা দেখাও।\n" "--show-conf : সংরক্ষণ করতে হবে এমন ডিরেক্টরির তালিকা।\n" "--config-info : কনফিগারেশন ফাইল অপশনসমূহ ব্যখ্যা কর (যারা X ব্যবহারকারী " "নয়)।\n" "--daemon : daemon কনফিগারেশন ব্যবহার কর।\n" "--help : এই ম্যাসেজটি দেখাও।\n" "--version : ভার্সান নাম্বার দেখাও।\n" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" "[--boot] [--splash]\n" "অপশনসমূহ:\n" " --boot - বুট লোডার কন্‌ফিগারে সক্রিয়\n" " --splash - বুট থিম কন্‌ফিগারে সক্রিয়\n" "ডিফল্ট মোড: স্বয়ংক্রিয়ভাবে কন্‌ফিগার হতে বলার মোড" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" "[অপশনসমূহ] [প্রোগ্রামের নাম]\n" "\n" "অপশনসমূহ:\n" " --help - এই সহায়ক বার্তা ছাপাও\n" " --report - প্রোগ্রামটিকে কোন একটি ম্যান্ড্রিব লিনাক্স টুল হওয়া উচিত\n" " --incident - প্রোগ্রামটিকে কোন একটি ম্যান্ড্রিব লিনাক্স টুল হওয়া উচিত" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" "[--add]\n" " --add - \"একটি নেটওয়ার্ক ইন্টারফেস যুক্ত করো\" উইজার্ড\n" " --del - \"একটি নেটওয়ার্ক ইন্টারফেস মেছে ফেলো\" উইজার্ড\n" " --skip-wizard - সংযুক্তি ম্যানেজ করো\n" " --internet - ইন্টারনেট কন্‌ফিগার করো\n" " --wizard - --add এর মতো" # সাম: # and gs for ghostscript for only this one... # did not translate "for only this one"... #: standalone.pm:69 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "\n" "ফন্ট ইমপোর্ট ও মনিটরিং অ্যাপ্লিকেশন\n" "\n" "অপশন:\n" "--windows_import : সব বিদ্যমান উইন্ডোজ পার্টিশন থেকে ইমপোর্ট করো।\n" "--xls_fonts : xls থেকে যেসব ফন্ট আছে সেগুলো দেখাও\n" "--install : যেকোন ফন্ট ফাইল বা ডিরেক্টরি গ্রহন করো।\n" "--uninstall : যেকোন ফন্ট ফাইল বা ডিরেক্টরি আনইনস্টল করো।\n" "--replace : যদি আগেই থেকে থাকে তবে সেই ফন্টগুলো প্রতিস্থাপন করো\n" "--application : ০ কোন অ্যাপ্লিকেশন নয়।\n" " : ১ সব অ্যাপ্লিকেশন সমর্থন করো।\n" " : name_of_application staroffice এর জন্য so \n" " : এবং ghostscript এর জন্য gs।" # সাম # Mandriva Linux Terminal #: standalone.pm:84 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPTIONS]...\n" "Mandriva Linux টার্মিনাল সার্ভার কনফিগারকারী\n" "--enable :MTS সক্রিয় করো\n" "--disable : MTS নিষ্ক্রিয় করো\n" "--start : MTS চালু করো\n" "--stop : MTS বন্ধ করো\n" "--adduser : MTS এ একটি ইতিমধ্যে তৈরী সিস্টেম ব্যবহারকারী যোগ করো " "(username প্রয়োজন)\n" "--deluser : MTS থেকে একটি ইতিমধ্যে তৈরী সিস্টেম ব্যবহারকারী বাদ দাও " "(username প্রয়োজন)\n" "--addclient : MTS এ একটি ক্লায়েন্ট মেশিন যোগ কর (MAC অ্যাড্রেস, IP, nbi " "ইমেজ নাম প্রয়োজন)\n" "--delclient : MTS থেকে একটি ক্লায়েন্ট মেশিন বাদ দাও (MAC অ্যাড্রেস, IP, nbi " "ইমেজ নাম প্রয়োজন)" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[কি-বোর্ড]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" # সাম #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" "[OPTIONS]\n" "নেটওয়ার্ক ও ইন্টারনেট সংযোগ ও মনিটরিং অ্যাপ্লিকেশন\n" "\n" "--defaultintf interface : এই ইন্টারফেসটি ডিফল্ট ইন্টারফেস হিসেবে দেখাও\n" "--connect : ইন্টারনেট সংযুক্তি না থাকলে সংযুক্ত করো\n" "--disconnect : সংযুক্ত হয়ে থাকলে সংযোগ বিচ্ছিন্ন করো\n" "--force : (dis)connect এর সাথে ব্যবহৃত হয় : সংযুক্ত/বিচ্ছিন্ন হতে বাধ্য করো।\n" "--status : সংযুক্ত হলে ১ ও বিচ্ছিন্ন হলে ০ পাঠায়, তারপর বের হয়ে যায়।\n" "--quiet : ব্যবহারকারীর সাথে তথ্য আদান-প্রদান করো না। (dis)connect এর সাথে " "ব্যবহার করার জন্য।" #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" # সাম # verify #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPTION]...\n" " --no-confirmation Mandriva Update মোডে প্রথম নিশ্চিতকরন প্রশ্ন জিজ্ঞাসা " "করো না\n" " --no-verify-rpm প্যাকেজ স্বাক্ষর নিরীক্ষা করো না\n" " --changelog-first বর্ণনা উইন্ডোতে filelist এর আগে changelog দোখাও\n" " --merge-all-rpmnew প্রাপ্ত সকল .rpmnew/.rpmsave ফাইলগুলো একীভূতকরণের " "পরামর্শ দাও" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [সকলকিছু]\n" " XFdrake [--noauto] মনিটর\n" " XFdrake রেজ্যুলুশন" #: standalone.pm:146 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "ব্যবহার: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " # সাম #: standalone/XFdrake:59 #, c-format msgid "You need to reboot for changes to take effect" msgstr "পরিবর্তনগুলো কার্যকর করতে আপনাকে রিবুট করতে হবে" #: standalone/XFdrake:90 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "অনুগ্রহপূর্বক লগ-আউট করুন ও তারপর Ctrl-Alt-BackSpace চাপুন" #: standalone/XFdrake:94 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "পরিবর্তন কার্যকর করার পূর্বে আপনাকে লগ-আউট করে তারপর পুণরায় লগ-ইন করতে হবে" #: standalone/drakTermServ:75 #, c-format msgid "Useless without Terminal Server" msgstr "টার্মিনাল সার্ভার ছাড়া অর্থহীন" #: standalone/drakTermServ:107 standalone/drakTermServ:113 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s-এর একটি ব্যবহারকারীর-নাম প্রয়োজন...\n" #: standalone/drakTermServ:124 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" "%s: %s-এর প্রয়োজন হোস্ট-নাম, MAC ঠিকানা, আই.পি., nbi-ইমেজ, THIN_CLIENT-এর জন্য " "0/1, স্থানীয় কনফিগ-এর জন্য 0/1...\n" #: standalone/drakTermServ:130 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s-এর একটি হোস্ট-নাম প্রয়োজন...\n" #: standalone/drakTermServ:212 standalone/drakTermServ:215 #, c-format msgid "Terminal Server Configuration" msgstr "টার্মিনাল সার্ভার কনফিগারেশন" #: standalone/drakTermServ:221 #, c-format msgid "Enable Server" msgstr "সার্ভার সক্রিয় করো" #: standalone/drakTermServ:227 #, c-format msgid "Disable Server" msgstr "সার্ভার নিষ্ক্রিয় করো" #: standalone/drakTermServ:233 #, c-format msgid "Start Server" msgstr "সার্ভার আরম্ভ করো" #: standalone/drakTermServ:239 #, c-format msgid "Stop Server" msgstr "সার্ভার বন্ধ করো" #: standalone/drakTermServ:248 #, c-format msgid "Etherboot Floppy/ISO" msgstr "ইথারনেট ফ্লপি/আই.এস.ও." #: standalone/drakTermServ:252 #, c-format msgid "Net Boot Images" msgstr "নেট বুট ইমেজ" #: standalone/drakTermServ:259 #, c-format msgid "Add/Del Users" msgstr "ব্যবহারকারী যোগ/অপসারণ করো" #: standalone/drakTermServ:263 #, c-format msgid "Add/Del Clients" msgstr "ক্লায়েন্ট যোগ/অপসারণ করো" #: standalone/drakTermServ:271 #, c-format msgid "Images" msgstr "ইমেজ" # সাম #: standalone/drakTermServ:272 #, c-format msgid "Clients/Users" msgstr "ক্লায়েন্ট/ব্যবহারকারী" # FIXME #: standalone/drakTermServ:290 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "প্রারম্ভিক উইজার্ড" # FIXME #: standalone/drakTermServ:326 standalone/drakTermServ:327 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" "ডিসপ্লে ব্যবস্থাপক (dm) হিসেবে %s-কে নির্দিষ্ট করা হয়েছে, /etc/passwd$$CLIENT$$ " "ফাইলে জি.ডি.এম. নামক ব্যবহারকারী যোগ করা হচ্ছে" # সাম #: standalone/drakTermServ:333 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" "\n" " এই উইজার্ড রুটিন:\n" " \t১) আপনাকে 'থিন' বা 'ফ্যাট' ক্লায়েন্ট বাছাই করতে বলবে।\n" "\t২) DHCP সেটআপ করবে।n\t\n" "\t\n" "এরপর, উইজার্ডটি:\n" "\t\n" " ক) সব nbis তৈরী " "করবে। \n" " খ) সার্ভার সক্রিয় " "করবে। \n" " গ) সার্ভার চালু " "করবে। \n" " ঘ) শ্যাডো ফাইলগুলো যৌগপদিক করবে যাতে root সহ সব ব্যবহারকারী, \n" " shadow$$CLIENT$$ ফাইলে যুক্ত " "হয়। \n" " ঙ) আপনাকে একটি বুট ফ্লপি তৈরী করতে পরামর্শ দেবে।\n" " চ) যদি থিন ক্লায়েন্ট হয়ে থাকে তবে পুনরায় KDM চালু করতে বলবে।\n" #: standalone/drakTermServ:378 #, c-format msgid "Cancel Wizard" msgstr "উইজার্ড বাতিল করো" #: standalone/drakTermServ:393 #, c-format msgid "Please save dhcpd config!" msgstr "অনুগ্রহপূর্বক dhcpd কনফিগ সংরক্ষণ করুন!" # FIXME #: standalone/drakTermServ:421 #, c-format msgid "Use thin clients." msgstr "থিন ক্লায়েন্ট ব্যবহার করো" #: standalone/drakTermServ:423 #, c-format msgid "Sync client X keyboard settings with server." msgstr "ক্লায়েন্টের এক্স কীবোর্ড-এর বৈশিষ্ট্যকে সার্ভারের সাথে এককালবর্তী (Sync) করো।" #: standalone/drakTermServ:425 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" "অনুগ্রহপূর্বক ক্লায়েন্টের ডিফল্ট ধরন বেছে নিন।\n" " 'থিন' ক্লায়েন্টের সব কিছুই সার্ভারের সি.পি.ইউ./র্যাম এবং ক্লায়েন্টের ডিসপ্লে " "ব্যবহার করে চালানো হয়।\n" " আর 'ফ্যাট' ক্লায়েন্ট তার নিজস্ব সি.পি.ইউ./র্যাম এবং সার্ভারে ফাইল সিস্টেম " "ব্যবহার করে।" #: standalone/drakTermServ:445 #, c-format msgid "Creating net boot images for all kernels" msgstr "সকল কার্নেলের জন্য নেট বুট ইমেজ তৈরি করা হচ্ছে" #: standalone/drakTermServ:446 standalone/drakTermServ:766 #: standalone/drakTermServ:782 #, c-format msgid "This will take a few minutes." msgstr "এ কাজে কয়েক মিনিট সময় লাগবে।" #: standalone/drakTermServ:455 standalone/drakTermServ:496 #, c-format msgid "Done!" msgstr "সম্পন্ন!" #: standalone/drakTermServ:467 standalone/drakTermServ:848 #, c-format msgid "%s failed" msgstr "" #: standalone/drakTermServ:476 #, c-format msgid "" "Not enough space to create\n" "NBIs in %s.\n" "Needed: %d MB, Free: %d MB" msgstr "" # FIXME #: standalone/drakTermServ:482 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" "সার্ভারের ব্যবহারকারীর তালিকাকে রুটসহ ক্লায়েন্ট তালিকার সাথে এককালবর্তী (Sync) করা " "হচ্ছে।" #: standalone/drakTermServ:502 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" "থিন ক্লায়েন্টের জন্য কৃত পরিবর্তন কার্যকর করার জন্য ডিসপ্লে ব্যবস্থাপককে পুনরায় চালু " "করতে হবে। এখনি কি পুনরায় চালু করবো?" #: standalone/drakTermServ:537 #, c-format msgid "Terminal Server Overview" msgstr "টার্মিনাল সার্ভারের সামগ্রিক চিত্র" # সাম # customize #: standalone/drakTermServ:538 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - ইথারবুট সক্রিয় বুট ইমেজ তৈরী করুন:\n" " \tএকটি কার্নেল ইথারবুট দিয়ে বুট করার জন্য একটি বিশেষ kernel/initrd ইমেজ " "তৈরী করতে হবে।\n" " \tmkinitrd-net এই কাজটির অধিকাংশ করে দেয় এবং drakTermServ হচ্ছে একটি " "গ্রাফিক্যাল \n" " \tইন্টারফেস যা এই ইমেজগুলোর ব্যবস্থাপনা/কাস্টোমাইজ করতে সাহায্য করে। \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include ফাইলটি include \n" " \tহিসেবে dhcpd.conf এ অন্তর্ভুক্ত করা হয়, যেটি তৈরী করতে আপনাকে অন্তত " "একটি সম্পূর্ন \n" " \tকার্নেলের জন্য ইথারবুট ইমেজ তৈরী করতে হবে।" #: standalone/drakTermServ:544 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" # সাম #: standalone/drakTermServ:562 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" " যদিও আপনি ক্লায়েন্ট মেশিনের জন্য একটি নির্দিষ্ট এন্ট্রির বদলে, অনেকগুলো IP " "addresses\n" " ব্যবহার করতে পারেন, তথাপি নির্দিষ্ট IP addresses ব্যবহার করলে আপনি " "ClusterNFS\n" " সরবরাহকৃত ক্লায়েন্ট প্রতি কনফিগারেশন ফাইল ব্যবস্থার সুবিধা পেতে পারেন।\n" "\t\t\t\n" " দ্রষ্টব্য: '#type' ক্ষেত্রটি শুধুমাত্র drakTermServ দ্বারা ব্যবহৃত হয়। ক্লায়েন্ট " "শুধুমাত্র 'থিন''\n" " বা 'ফ্যাট' হতে পারে। থিন ক্লায়েন্টগুলো XDMCP এর মাধ্যমে বেশীরভাগ সফ্টওয়্যার " "সার্ভারে চালায়, \n" " আর 'ফ্যাট' ক্লায়েন্টগুলো বেশীরভাগ সফ্টওয়্যার ক্লায়েন্টেই চালায়।\n" " থিন ক্লায়েন্টের জন্য একটি বিশেষ inittab, %s লেখা হয়। থিন ক্লায়েন্টে " "ব্যবহার করা হলে,\n" " XDMCP সক্রিয় করার জন্য সিস্টেম কনফিগারেশন ফাইল xdm-config, kdmrc, and " "gdm.conf\n" " পরিবর্ধন করা হয়। যেহেতু XDMCP তে নিরাপত্তার প্রশ্ন বিদ্যমান, hosts.deny " "এবং hosts.allow\n" " ব্যবহার করে স্থানীয় সাবনেটে প্রবেশ সীমাবদ্ধ করা হয়।\n" "\t\t\t\n" " দ্রষ্টব্য: '#hdw_config' এন্ট্রিটি শুধুমাত্র drakTermServ ব্যবহার করে। " "ক্লায়েন্টের মান শুধুমাত্র সত্য \n" " বা মিথ্যা হতে পারে। সত্য হলে ক্লায়েন্ট মেশিনে রুট লগইন সম্ভব এবং " "স্থানীয়ভাবে 'drak' টুলসমূহ \n" " ব্যবহার করে শব্দ, মাউস, X হার্ডওয়্যার কনফিগারেশন করা যেতে পারে। " "ক্লায়েন্টের IP addresses \n" " এর সাথে সম্পৃক্ত আলাদা কনফিগারেশন ফাইল তৈরী করে এবং পড়া/লেখা মাউন্ট " "পয়েন্ট তৈরী \n" " করে ক্লায়েন্টকে তা পরিবর্ধনের সুযোগ দিয়ে এটি সক্রিয় করা হয়। এই " "কনফিগারেশনে সন্তূষ্ট হলে \n" " আপনি ক্লায়েন্ট থেকে রুট লগইন সুবিধা সরিয়ে ফেলতে পারেন।\n" "\t\t\t\n" " দ্রষ্টব্য: ক্লায়েন্ট অন্তর্ভুক্ত বা বদল করার পর বন্ধ করে পুনরায় চালু করতে হবে।" #: standalone/drakTermServ:582 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" # সাম #: standalone/drakTermServ:594 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - 1$%s রক্ষনাবেক্ষণ করো:\n" " \tব্যবহারকারীদের ডিস্কবিহীন ক্লায়েন্ট থেকে সিস্টেমে লগইন করতে হলে,\n" " \t/etc/shadow তে তাদের এন্ট্রি, 2$%s এ কপি করতে হবে। এই ক্ষেত্রে\n" " \tdrakTermServ ফাইলে সিস্টেম ব্যবহারকারী যোগ করে বা সরিয়ে সাহায্য করে।" # সাম #: standalone/drakTermServ:598 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - ক্লায়েন্ট প্রতি %s:\n" " \tclusternfs দিয়ে, সার্ভারের রুট ফাইল সিস্টেমে, প্রতিটি ডিস্কবিহীন " "ক্লায়েন্টের জন্য স্বকীয় কনফিগারেশন\n" " \t ফাইল তৈরী করা যায়। স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন অনুমোদন " "করলে,\n" " \tdrakTermServ এই ফাইলগুলো তৈরী করতে সাহায্য করবে।" # সাম # customize = ? #: standalone/drakTermServ:603 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - ক্লায়েন্ট প্রতি সিস্টেম কনফিগারেশন ফাইল:\n" " \tclusternfs দিয়ে, সার্ভারের রুট ফাইল সিস্টেমে, প্রতিটি ডিস্কবিহীন " "ক্লায়েন্টের জন্য স্বকীয় কনফিগারেশন\n" " \t ফাইল তৈরী করা যায়। স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন অনুমোদন " "করলে,\n" " \t প্রতি ক্লায়েন্টের জন্য /etc/modules.conf, /etc/sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard ফাইলসমূহ কাস্টোমাইজ করা যেতে পারে।\n" "\n" " দ্রষ্টব্য: স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন সক্রিয় করলে, এই ফিচার " "সক্রিয় করা প্রতিটি মেশিনের \n" " জন্য টার্মিনাল সার্ভারের রুট লগইন সক্রিয় হয়। একবার ক্লায়েন্ট মেশিন কনফিগার " "করা হয়ে গেলে, স্থানীয় \n" " কনফিগারেশন বন্ধ করে দেয়া যায়, এতে কনফিগারেশন ফাইলগুলো সংরক্ষিত থাকে।" #: standalone/drakTermServ:612 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:633 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0" msgstr "" #: standalone/drakTermServ:666 #, c-format msgid "Boot Floppy" msgstr "বুট ফ্লপি" #: standalone/drakTermServ:668 #, c-format msgid "Boot ISO" msgstr "বুট ISO" #: standalone/drakTermServ:670 #, c-format msgid "PXE Image" msgstr "PXE ইমেজ" #: standalone/drakTermServ:731 #, c-format msgid "Default kernel version" msgstr "ডিফল্ট কার্নেল ভার্সন" # সাম #: standalone/drakTermServ:734 #, c-format msgid "Create PXE images." msgstr "PXE ইমেজ তৈরী করো।" #: standalone/drakTermServ:764 #, c-format msgid "Build Whole Kernel -->" msgstr "পুরো কার্নেল বিল্ড করো -->" #: standalone/drakTermServ:771 #, c-format msgid "No kernel selected!" msgstr "কোন কার্নেল নির্বাচন করা হয় নি!" #: standalone/drakTermServ:774 #, c-format msgid "Build Single NIC -->" msgstr "একটি NIC বিল্ড করো -->" #: standalone/drakTermServ:778 #, c-format msgid "No NIC selected!" msgstr "কোন NIC নির্বাচন করা হয় নি" #: standalone/drakTermServ:781 #, c-format msgid "Build All Kernels -->" msgstr "সকল কার্নেলসমুহ বিল্ড করো -->" #: standalone/drakTermServ:796 #, c-format msgid "<-- Delete" msgstr "<-- মুছো" # সাম #: standalone/drakTermServ:801 #, c-format msgid "No image selected!" msgstr "কোন ইমেজ নির্বাচন করা হয়নি!" #: standalone/drakTermServ:804 #, c-format msgid "Delete All NBIs" msgstr "সকল NBI সমুহকে মুছো" #: standalone/drakTermServ:966 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! সিস্টেম ডাটাবেজের পাসওয়ার্ড টার্মিনাল সার্ভার ডাটাবেজের পাসওয়ার্ডের\n" "চেয়ে ভিন্ন। টার্মিনাল সার্ভারে লগিন সক্রিয় করতে ব্যবহারকারী \n" "মুছে দিন/পুনরায়-যুক্ত করুন।" #: standalone/drakTermServ:971 #, c-format msgid "Add User -->" msgstr "ব্যবহারকারী যোগ করো -->" #: standalone/drakTermServ:977 #, c-format msgid "<-- Del User" msgstr "<-- ব্যবহারকারী মুছো" #: standalone/drakTermServ:1013 #, c-format msgid "type: %s" msgstr "ধরণ: %s" #: standalone/drakTermServ:1017 #, c-format msgid "local config: %s" msgstr "স্হানীয় কনফিগ: %s" #: standalone/drakTermServ:1047 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" "স্হানীয় হার্ডওয়্যার কনফিগারেশনকে\n" "অনুমতি দাও।" #: standalone/drakTermServ:1056 #, c-format msgid "No net boot images created!" msgstr "কোন নেট বুট ইমেজ তৈরি করা হয় নি!" #: standalone/drakTermServ:1075 #, c-format msgid "Thin Client" msgstr "থিন ক্লায়েন্ট" #: standalone/drakTermServ:1079 #, c-format msgid "Allow Thin Clients" msgstr "থিন ক্লায়েন্টসমুহকে অনুমতি দাও" # সাম: Sync = সমতালীয় ? #: standalone/drakTermServ:1080 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" "ক্লায়েন্টের এক্স কীবোর্ডের মানসমূহকে\n" " সার্ভারের সাথে সমতালীয় করো।" #: standalone/drakTermServ:1081 #, c-format msgid "Add Client -->" msgstr "ক্লায়েন্ট যোগ করো -->" #: standalone/drakTermServ:1095 #, c-format msgid "type: fat" msgstr "ধরণ: মোটা" #: standalone/drakTermServ:1096 #, c-format msgid "type: thin" msgstr "ধরণ: পাতলা" #: standalone/drakTermServ:1103 #, c-format msgid "local config: false" msgstr "স্হানীয় কনফিগ: মিথ্যা" #: standalone/drakTermServ:1104 #, c-format msgid "local config: true" msgstr "স্থানীয় কনফিগ: মিথ্যা" #: standalone/drakTermServ:1112 #, c-format msgid "<-- Edit Client" msgstr "<-- ক্লায়েন্ট সম্পাদন" #: standalone/drakTermServ:1138 #, c-format msgid "Disable Local Config" msgstr "স্হানীয় কনফিগ নিষ্ক্রিয় করো" #: standalone/drakTermServ:1145 #, c-format msgid "Delete Client" msgstr "ক্লায়েন্ট মুছো" #: standalone/drakTermServ:1154 #, c-format msgid "dhcpd Config..." msgstr "dhcpd কনফিগ..." #: standalone/drakTermServ:1169 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "সম্পূর্ণ পরিবর্তনগুলো সক্রিয় করার জন্য ডিসপ্লে ম্যানেজার পুনরায় চালু করা প্রয়োজন। \n" "(কনসোলে লিখুন - service dm restart)" #: standalone/drakTermServ:1214 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" "Thin ক্লায়েন্ট স্বয়ংক্রিয় লগিনের সাথে কাজ করবে না। স্বয়ংক্রিয় লগিন নিষ্ক্রিয় করবেন?" #: standalone/drakTermServ:1230 #, c-format msgid "All clients will use %s" msgstr "সমস্ত ক্লায়েন্ট %s ব্যবহার করবে" #: standalone/drakTermServ:1264 #, c-format msgid "Subnet:" msgstr "সাবনেট:" #: standalone/drakTermServ:1271 #, c-format msgid "Netmask:" msgstr "নেটমাস্ক:" #: standalone/drakTermServ:1278 #, c-format msgid "Routers:" msgstr "রাউটার সমুহ:" #: standalone/drakTermServ:1285 #, c-format msgid "Subnet Mask:" msgstr "সাবনেট মাস্ক:" #: standalone/drakTermServ:1292 #, c-format msgid "Broadcast Address:" msgstr "ব্রডকাস্ট অ্যাড্রেস:" #: standalone/drakTermServ:1299 #, c-format msgid "Domain Name:" msgstr "ডোমেইন নাম:" #: standalone/drakTermServ:1307 #, c-format msgid "Name Servers:" msgstr "নেইম সার্ভার সমুহ:" #: standalone/drakTermServ:1318 #, c-format msgid "IP Range Start:" msgstr "আই-পি range শুরু:" #: standalone/drakTermServ:1319 #, c-format msgid "IP Range End:" msgstr "আই-পি range শেষ:" #: standalone/drakTermServ:1361 #, c-format msgid "Append TS Includes To Existing Config" msgstr "বিদ্যমান কন্‌ফিগ যুক্ত append TS" #: standalone/drakTermServ:1363 #, c-format msgid "Write Config" msgstr "কনফিগ লিখ" #: standalone/drakTermServ:1379 #, c-format msgid "dhcpd Server Configuration" msgstr "dhcpd সার্ভার কনফিগারেশন" #: standalone/drakTermServ:1380 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "এই মানগুলোর বেশিরভাগই আপনার চলন্ত সিস্টেম\n" "থেকে বের করা হয়েছে।\n" "আপনি আপনার প্রয়োজন মত পরিবর্তন করতে পারেন।" #: standalone/drakTermServ:1383 #, c-format msgid "" "Dynamic IP Address Pool\n" "(needed for PXE clients):" msgstr "" #: standalone/drakTermServ:1536 #, c-format msgid "Write to %s failed!" msgstr "" #: standalone/drakTermServ:1548 #, c-format msgid "Please insert floppy disk:" msgstr "অনুগ্রহ করে ফ্লপি ডিস্ক প্রবেশ করান:" #: standalone/drakTermServ:1552 #, c-format msgid "Could not access the floppy!" msgstr "ফ্লপিটিতে প্রবেশ করা যাচ্ছে নাহ্!" #: standalone/drakTermServ:1554 #, c-format msgid "Floppy can be removed now" msgstr "এখন ফ্লপি সরানো যাবে নাহ্" #: standalone/drakTermServ:1557 #, c-format msgid "No floppy drive available!" msgstr "কোন ফ্লপি ড্রাইভ উপস্থিত নেই!" #: standalone/drakTermServ:1563 #, c-format msgid "PXE image is %s/%s" msgstr "%s/%s হলো PXE ইমেজ" #: standalone/drakTermServ:1565 #, c-format msgid "Error writing %s/%s" msgstr "%s/%s লিখতে সমস্যা হয়েছে" #: standalone/drakTermServ:1575 #, c-format msgid "Etherboot ISO image is %s" msgstr "%s হলো ইথারবুট ISO ইমেজ" #: standalone/drakTermServ:1577 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "কিছু একটা সমস্যা হয়েছে! - mkisofs ইনস্টল করা আছে?" #: standalone/drakTermServ:1598 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "প্রথমে /etc/dhcpd.conf তৈরি করতে হবে!" #: standalone/drakTermServ:1757 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "%s পাসওয়ার্ড টার্মিনাল সার্ভার এ ভাল নয় - আবার লেখছি...\n" #: standalone/drakTermServ:1770 #, c-format msgid "%s is not a user..\n" msgstr "%s ব্যবহারকারী নয়..\n" #: standalone/drakTermServ:1771 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s ইতিমধ্যেই একজন টার্মিনাল সার্ভার ব্যবহারকারী\n" #: standalone/drakTermServ:1773 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "টার্মিনাল সার্ভারে %s যোগ করা ব্যর্থ হয়েছে!\n" #: standalone/drakTermServ:1775 #, c-format msgid "%s added to Terminal Server\n" msgstr "টার্মিনাল সার্ভারে %s যোগ করা হয়েছে!\n" #: standalone/drakTermServ:1792 #, c-format msgid "Deleted %s...\n" msgstr "%s মুছা হয়েছে...\n" #: standalone/drakTermServ:1794 standalone/drakTermServ:1867 #, c-format msgid "%s not found...\n" msgstr "%s পাওয়া যাচ্ছে নাহ্...\n" #: standalone/drakTermServ:1895 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow এবং /etc/hosts.deny ইতিমধ্যেই কনফিগার করা হয়েছে - বদলানো হয়নি" #: standalone/drakTermServ:2035 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "কনফিগারেশন বদলানো হয়েছে - clusternfs/dhcpd আবার শুরু করবো? " #: standalone/drakautoinst:38 standalone/drakhosts:118 #: standalone/drakhosts:125 standalone/draknfs:86 standalone/draknfs:107 #: standalone/draknfs:460 standalone/draknfs:462 standalone/draknfs:552 #: standalone/draknfs:559 #, c-format msgid "Error!" msgstr "সমস্যা!" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "দরকারি ইমেজ ফাইল `%s' কে খুঁজে পাচ্ছি নাহ্।" #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "সয়ংক্রিয় ইনস্টল কনফিগারকারী" #: standalone/drakautoinst:42 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "পুনরায় চালাও" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "নিজ হাতে" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "সয়ংক্রিয় ধাপসমুহের কনফিগারেশন" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "অনুগ্রহ করে এটার প্রত্যেকটি স্টেপ বাছাই করুন যেখানে আপনার ইনস্টলের মত এটি পুনরায় " "চলবে, অথবা এটি হাতে হাতে হবে" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "সয়ংক্রিয় ফ্লপি ইনস্টল তৈরি করা হচ্ছে" #: standalone/drakautoinst:90 #, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "আরেকটি ফাঁকা ফ্লপি %s ডিস্কে ঢুকান (ড্রাইভার ডিস্কের জন্য)" #: standalone/drakautoinst:91 #, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "সয়ংক্রিয় ফ্লপি ইনস্টল তৈরি করা হচ্ছে (ড্রাইভার ডিস্ক)" #: standalone/drakautoinst:156 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "স্বাগতম।\n" "\n" "সয়ংক্রিয়-ইনস্টলের জন্য প্যারামিটারসমুহ বাঁ দিকের সেকশানে উপস্হিত" #: standalone/drakautoinst:251 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "ফ্লপিটি সাফল্যের সাথে তৈরী করা হয়েছে।\n" "আপনি এখন আপনার ইনস্টলেশন পুনরায় চালু করতে পারেন।" #: standalone/drakautoinst:287 #, c-format msgid "Auto Install" msgstr "সয়ংক্রিয় ইনস্টল" #: standalone/drakautoinst:356 #, c-format msgid "Add an item" msgstr "একটি আইটেম যোগ করো" #: standalone/drakautoinst:363 #, c-format msgid "Remove the last item" msgstr "শেষ আইটেমটি সরাও" #: standalone/drakbackup:153 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" "TCL স্ক্রিপ্টিং ভাষার প্রতি বর্ধিত কিছু আশা করা হচ্ছে যা ব্যবহারকারীর সহায়তা ছাড়াই " "নিজে নিজেই কাজ করবে।" #: standalone/drakbackup:154 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "ড্র্যাকব্যাকআপ কন্‌ফিগারেশনে এই সিস্টেমের জন্য পাসওয়ার্ড জমা করুন।" #: standalone/drakbackup:155 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "একটি মাল্টিসেশন সিডি'র জন্য, শুধুমাত্র প্রথম সেশন cdrw মুছে ফেলবে। অন্যথায় প্রত্যেক " "ব্যাকআপের পূর্বেইcdrw মুছে যাবে।" #: standalone/drakbackup:156 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "এই অপশন পরিবর্তিত হওয়া ফাইলগুলো সংরক্ষন করবে। সঠিক ব্যবহার নির্ভর করবে কখন " "incremental বা differential মোড ব্যবহৃত হবে।" #: standalone/drakbackup:157 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Incremental ব্যাকআপ শুধুমাত্র পরিবর্তিত অথবা সর্বশেষ নতুন ব্যাকআপ পর্যন্ত সংরক্ষণ করে।" #: standalone/drakbackup:158 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" "Differential ব্যাকআপ শুধুমাত্র পরিবর্তিত অথবা সর্বশেষ আসল 'base' ব্যাকআপ পর্যন্ত " "সংরক্ষণ করে।" #: standalone/drakbackup:159 #, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" "এক্ষেত্রে অবশ্যই একজন স্থানীয় ব্যবহারকারী অথবা ই-মেইল অ্যাড্রেস হওয়া উচিত যাকে আপনি " "ব্যাকআপ ফলাফলের প্রাপক হিসেবে ব্যবহার করবেন। আপনাকে একটি সঠিক মেইল সার্ভার বলে " "দেয়া উচিত।" #: standalone/drakbackup:160 #, fuzzy, c-format msgid "" "This should be the return address that you want the backup results sent " "from. Default is drakbackup." msgstr "" "এক্ষেত্রে অবশ্যই একজন স্থানীয় ব্যবহারকারী অথবা ই-মেইল অ্যাড্রেস হওয়া উচিত যাকে আপনি " "ব্যাকআপ ফলাফলের প্রাপক হিসেবে ব্যবহার করবেন। আপনাকে একটি সঠিক মেইল সার্ভার বলে " "দেয়া উচিত।" #: standalone/drakbackup:161 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "একটি ডিরেক্টরি ট্রি'র উপরে থাকা একটি .backupignore ফাইলে তালিকাস্থ ফাইল বা " "ওয়াইল্ডকার্ড ব্যাকআপ হবে না।" #: standalone/drakbackup:162 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "অন্যান্য মিডিয়াতে ব্যাকআপ করার জন্য, হার্ড ড্রাইভে ফাইলগুলো ইতিমধ্যেই তৈরী হয়ে আছে, " "তারপর অন্য মিডিয়াতে স্থানান্তর। এই অপশনটি সক্রিয় থাকলে হার্ড ড্রাইভে tar ফাইল " "ব্যাকআপ করার পর সেটি মুছে ফেলবে।" #: standalone/drakbackup:163 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "কিছু প্রোটোকল, যেমন rsync, সার্ভারে কন্‌ফিগার হতে পারে। ডিরেক্টরি পাথ ব্যবহার করার " "চেয়ে, আপনি সার্ভিস পাথের জন্য 'মডিউল'এর নাম ব্যবহার করতে পারেন।" #: standalone/drakbackup:164 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" "আপনাকে আপনার নিজের দিন এবং সময় নির্দিষ্ট করার অনুমতি দেয়া হচ্ছে। অন্যান্য অপশন /" "etc/crontab ব্যবহার করে।" #: standalone/drakbackup:327 #, c-format msgid "No media selected for cron operation." msgstr "ক্রন (cron) অপারেশনের জন্য কোন মিডিয়া চিহ্নিত হয়নি।" #: standalone/drakbackup:331 #, c-format msgid "No interval selected for cron operation." msgstr "ক্রন (cron) অপারেশনের জন্য কোন বিরতি চিহ্নিত হয়নি।" #: standalone/drakbackup:378 #, c-format msgid "Interval cron not available as non-root" msgstr "root ছাড়া ক্রন বিরতি পাওয়া যাবে না" #: standalone/drakbackup:465 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "\"%s\" কোন সঠিক ই-মেইলও নয় আবার স্থানীয় কোন ব্যবহারকারীও নয়!" #: standalone/drakbackup:469 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" "\"%s\" একজন স্থানীয় ব্যবহারকারী, কিন্তু আপনি কোন স্থানীয় smtp বাছাই করেন নি, " "সুতরাং আপনাকে অবশ্যইএকটি সম্পূর্ণ ই-মেইল ঠিকানা ব্যবহার করতে হবে!" #: standalone/drakbackup:478 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "সঠিক ব্যবহারকারীদের তালিকা পরিবর্তন হয়েছে, config ফাইল পুনরায় লেখা হচ্ছে।" #: standalone/drakbackup:480 #, c-format msgid "Old user list:\n" msgstr "ব্যবহারকারীদের পুরাতন তালিকা:\n" #: standalone/drakbackup:482 #, c-format msgid "New user list:\n" msgstr "ব্যবহারকারীদের নতুন তালিকা:\n" #: standalone/drakbackup:511 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " ড্র্যাকব্যাকআপ রিপোর্ট \n" #: standalone/drakbackup:512 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " ড্র্যাকব্যাকআপ ডেম্যন রিপোর্ট\n" #: standalone/drakbackup:518 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " ড্র্যাকব্যাকআপ রিপোর্টের বিশদ বিবরণ\n" "\n" "\n" #: standalone/drakbackup:543 standalone/drakbackup:614 #: standalone/drakbackup:670 #, c-format msgid "Total progress" msgstr "মোট উন্নতি" #: standalone/drakbackup:596 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s ইতিমধ্যেই বর্তমান, মুছব?\n" "\n" "আপনি যদি ইতিমধ্যেই কাজ করে ফেলে থাকেন তাহলে আপনাকে সম্ভবত সার্ভারে থাকা \n" "authorized_keys এর এন্ট্রিগুলো বিশোধিত করতে হবে।" #: standalone/drakbackup:605 #, c-format msgid "This may take a moment to generate the keys." msgstr "কী সমুহ তৈরি হতে কিছু সময় লাগবে।" #: standalone/drakbackup:612 #, c-format msgid "Cannot spawn %s." msgstr "%s কে spawn করা যাচ্ছে নাহ্।" #: standalone/drakbackup:629 #, c-format msgid "No password prompt on %s at port %s" msgstr "%s পোর্টের %s এ কোন পাসওয়ার্ড প্রম্পট নেই" #: standalone/drakbackup:630 #, c-format msgid "Bad password on %s" msgstr "%s এ ভুল পাসওয়ার্ড" #: standalone/drakbackup:631 #, c-format msgid "Permission denied transferring %s to %s" msgstr "%s কে %s এ স্থানান্তরের অনুমতি নেই" #: standalone/drakbackup:632 #, c-format msgid "Can not find %s on %s" msgstr "%2$s এ %1$s কে খুঁজে পাওয়া যায় নি" #: standalone/drakbackup:636 #, c-format msgid "%s not responding" msgstr "%s সাড়া দিচ্ছে নাহ্" #: standalone/drakbackup:640 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "স্থানান্তর সফলভাবে হয়েছে\n" "আপনি এখন সার্ভারে প্রবেশ পরীক্ষা করে দেখতে পারেন:\n" "\n" "ssh -i %s %s@%s\n" "\n" "পাসওয়ার্ড প্রম্পট ছাড়াই।" #: standalone/drakbackup:690 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "ড্রাইভে কোন সিডি-আর/ডিভিডি-আর নেই!" #: standalone/drakbackup:694 #, c-format msgid "Does not appear to be recordable media!" msgstr "রেকর্ড করার মতো মাধ্যম বলে মনে হচ্ছে নাহ্!" #: standalone/drakbackup:699 #, c-format msgid "Not erasable media!" msgstr "মোছার মতো মাধ্যম নাহ্!" #: standalone/drakbackup:741 #, c-format msgid "This may take a moment to erase the media." msgstr "মাধ্যমটি মুছতে কিছু সময় লাগতে পারে।" #: standalone/drakbackup:799 #, c-format msgid "Permission problem accessing CD." msgstr "সিডি প্রবেশ অনুমতির সমস্যা।" #: standalone/drakbackup:826 #, c-format msgid "No tape in %s!" msgstr "%s এর মধ্যে কোন টেপ নেই!" #: standalone/drakbackup:932 #, c-format msgid "" "Backup destination quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:951 standalone/drakbackup:983 #, c-format msgid "Backup system files..." msgstr "সিস্টেম ফাইলগুলো ব্যাকআপ করা হচ্ছে..." #: standalone/drakbackup:984 standalone/drakbackup:1024 #, c-format msgid "Hard Disk Backup files..." msgstr "হার্ড ডিস্ক ব্যাকআপ ফাইল..." #: standalone/drakbackup:1023 #, c-format msgid "Backup User files..." msgstr "ব্যবহারকারীর ফাইলগুলো ব্যাকআপ করা হচ্ছে..." #: standalone/drakbackup:1057 #, c-format msgid "Backup Other files..." msgstr "অন্যান্য ফাইলগুলো ব্যাকআপ করা হচ্ছে..." #: standalone/drakbackup:1058 #, c-format msgid "Hard Disk Backup Progress..." msgstr "হার্ড ডিস্ক ব্যাকআপের উন্নতি..." #: standalone/drakbackup:1063 #, c-format msgid "No changes to backup!" msgstr "ব্যাকআপে কোন পরিবর্তন নেই!" #: standalone/drakbackup:1080 standalone/drakbackup:1103 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "%s এর মাধ্যমে ড্র্যাকব্যাকআপ কার্যক্রম:\n" "\n" #: standalone/drakbackup:1089 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " এফ.টি.পি. সংযোগে সমস্যা: আপনার ব্যাক-আপ ফাইলগুলো এফ.টি.পি. ব্যবহার করে প্রেরণ " "করা যায় নি।\n" #: standalone/drakbackup:1090 #, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "এফ.টি.পি. ব্যবহার করে ফাইল প্রেরণে সমস্যা। অনুগ্রহপূর্বক এফ.টি.পি. কনফিগারেশন " "সংশোধন করুন।" #: standalone/drakbackup:1092 #, c-format msgid "file list sent by FTP: %s\n" msgstr "এফ.টি.পি. ব্যবহার করে সর্বশেষ প্রেরিত ফাইল: %s\n" #: standalone/drakbackup:1108 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "সিডি ব্যবহার করে ড্রেকব্যাক-আপ-এর কার্যকলাপ:\n" "\n" #: standalone/drakbackup:1113 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "টেপ ব্যবহার করে ড্রেকব্যাক-আপ-এর কার্যকলাপ:\n" "\n" #: standalone/drakbackup:1122 #, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "মেইল প্রেরণে সমস্যা। রিপোর্ট মেইল প্রেরণ করা হয় নি।" #: standalone/drakbackup:1123 #, c-format msgid " Error while sending mail. \n" msgstr " মেইল প্রেরণে সমস্যা।\n" #: standalone/drakbackup:1153 #, c-format msgid "Can not create catalog!" msgstr "তালিকা তৈরি করা যাচ্ছে না!" #: standalone/drakbackup:1394 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "অনুগ্রহপূর্বক আপনার প্রয়োজনীয় সকল অপশন পরীক্ষা করুন।\n" #: standalone/drakbackup:1395 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "এই অপশনগুলো /etc ডিরেক্টরির সকল ফাইল ব্যাক-আপ এবং ব্যাক-আপ থেকে পুনরুদ্ধার করতে " "পারে।\n" #: standalone/drakbackup:1396 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "সিস্টেম ফাইলসমূহ ব্যাক-আপ করুন। (/etc ডিরেক্টরি)" # FIXME: Incremental = বৃদ্ধিঘটিত ? #: standalone/drakbackup:1397 standalone/drakbackup:1461 #: standalone/drakbackup:1527 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "বৃদ্ধিঘটিত/পার্থক্যমূলক ব্যাক-আপ ব্যবহার করো (পুরনো ব্যাক-আপ অপসারণ করবে না)" #: standalone/drakbackup:1399 standalone/drakbackup:1463 #: standalone/drakbackup:1529 #, c-format msgid "Use Incremental Backups" msgstr "বৃদ্ধিঘটিত ব্যাক-আপ ব্যবহার করো" #: standalone/drakbackup:1399 standalone/drakbackup:1463 #: standalone/drakbackup:1529 #, c-format msgid "Use Differential Backups" msgstr "পার্থক্যমূলক ব্যাক-আপ ব্যবহার করো" #: standalone/drakbackup:1401 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "গুরুত্বপূর্ণ ফাইলসমূহ অন্তর্ভুক্ত করবে না (passwd, group, fstab)" #: standalone/drakbackup:1402 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "এই অপশনের সাহায্যে /etc ডিরেক্টরির যে কোন সময়ের ব্যাক-আপ পুনরুদ্ধার করতে পারবেন।" #: standalone/drakbackup:1433 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" "অনুগ্রহপূর্বক যে সকল ব্যবহারকারীকে ব্যাক-আপ-এর অন্তর্ভুক্ত করতে চান তাদের টিক দিন।" #: standalone/drakbackup:1460 #, c-format msgid "Do not include the browser cache" msgstr "ব্রাউজার ক্যাশ অন্তর্ভুক্ত করবে না" #: standalone/drakbackup:1514 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "ফাইল বা ডিরেক্টরি নির্বাচন করুন ও তারপর 'ঠিক আছে' ক্লিক করুন" #: standalone/drakbackup:1515 standalone/drakfont:657 #, c-format msgid "Remove Selected" msgstr "নির্বাচিতদের অপসারণ করো" #: standalone/drakbackup:1578 #, c-format msgid "Users" msgstr "ব্যবহারকারী" #: standalone/drakbackup:1598 #, c-format msgid "Use network connection to backup" msgstr "ব্যাক-আপ তৈরির জন্য নেটওয়ার্ক সংযোগ ব্যবহার করো" #: standalone/drakbackup:1600 #, c-format msgid "Net Method:" msgstr "নেট পদ্ধতি:" #: standalone/drakbackup:1604 #, c-format msgid "Use Expect for SSH" msgstr "এস.এস.এইচ.-এর জন্য Expect ব্যবহার করো" # FIXME #: standalone/drakbackup:1605 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "এস.এস.এইচ.-এর জন্য ব্যাক-আপ কী (Key) তৈরি/স্থানান্তর করো" #: standalone/drakbackup:1607 #, c-format msgid "Transfer Now" msgstr "এখন স্থানান্তর করো" #: standalone/drakbackup:1609 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "অন্যান্য(ড্রেকব্যাক-আপ ব্যতীত) কীসমূহ (Key) ইতিমধ্যেই যথাস্থানে রয়েছে" #: standalone/drakbackup:1612 #, c-format msgid "Host name or IP." msgstr "হোস্টনাম বা আই.পি." #: standalone/drakbackup:1617 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "এই হোস্ট-এর যে ডিরেক্টরিতে (বা মডিউলে) ব্যাক-আপ রাখা হবে।" #: standalone/drakbackup:1629 #, c-format msgid "Remember this password" msgstr "এই পাসওয়ার্ডটি মনে রাখবে" #: standalone/drakbackup:1645 #, c-format msgid "Need hostname, username and password!" msgstr "হোস্টনাম, ব্যবহারকারীর নাম ও পাসওয়ার্ড প্রয়োজন!" #: standalone/drakbackup:1736 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "ব্যাক-আপ তৈরির জন্য সিডি-আর/ডিভিডি-আর ব্যবহার করো" #: standalone/drakbackup:1739 #, c-format msgid "Choose your CD/DVD device" msgstr "সিডি/ডিভিডি ডিভাইস বেছে নিন" #: standalone/drakbackup:1744 #, c-format msgid "Choose your CD/DVD media size" msgstr "সিডি/ডিভিডি মিডিয়ার আকার বেছে নিন" #: standalone/drakbackup:1751 #, c-format msgid "Multisession CD" msgstr "মাল্টিসেশন সিডি" # FIXME #: standalone/drakbackup:1753 #, c-format msgid "CDRW media" msgstr "সিডি-রিড-রাইট (CDRW) মিডিয়া" #: standalone/drakbackup:1759 #, c-format msgid "Erase your RW media (1st Session)" msgstr "রিড-রাইট মিডিয়ায় ধারণকৃত তথ্য মুছে ফেলো (১ম সেশন)" #: standalone/drakbackup:1760 #, c-format msgid " Erase Now " msgstr " এখন মোছো " #: standalone/drakbackup:1766 #, c-format msgid "DVD+RW media" msgstr "ডিভিডি+রিড-রাইট মিডিয়া" #: standalone/drakbackup:1768 #, c-format msgid "DVD-R media" msgstr "ডিভিডি-আর মিডিয়া" #: standalone/drakbackup:1770 #, c-format msgid "DVDRAM device" msgstr "ডিভিডির্যাম ডিভাইস" #: standalone/drakbackup:1801 #, c-format msgid "No CD device defined!" msgstr "কোন সিডি ডিভাইস নির্দিষ্ট করা হয় নি!" #: standalone/drakbackup:1843 #, c-format msgid "Use tape to backup" msgstr "ব্যাক-আপ-এর কাজে টেপ ব্যবহার করো" #: standalone/drakbackup:1846 #, c-format msgid "Device name to use for backup" msgstr "ব্যক-আপ-এর কাজে ব্যবহৃত ডিভাইসের নাম" #: standalone/drakbackup:1852 #, c-format msgid "Backup directly to tape" msgstr "সরাসরি টেপে ব্যাকআপ" #: standalone/drakbackup:1858 #, c-format msgid "Do not rewind tape after backup" msgstr "ব্যাক-আপ তৈরির পর টেপকে প্রথমে নিয়ে (Rewind) যাবে না" #: standalone/drakbackup:1864 #, c-format msgid "Erase tape before backup" msgstr "ব্যাক-আপ-এর পূর্বে টেপে ধারনকৃত তথ্য মুছে ফেলো" #: standalone/drakbackup:1870 #, c-format msgid "Eject tape after the backup" msgstr "ব্যাক-আপ তৈরি সম্পন্ন হওয়ার পর টেপ বের করে দাও" #: standalone/drakbackup:1946 #, c-format msgid "Enter the directory to save to:" msgstr "যে ডিরেক্টরিতে সংরক্ষণ করা হবে তাতে প্রবেশ করো:" #: standalone/drakbackup:1950 #, c-format msgid "Directory to save to" msgstr "যে ডিরেক্টরিতে সংরক্ষণ করা হবে" #: standalone/drakbackup:1955 #, c-format msgid "" "Maximum disk space\n" " allocated for backups (MB)" msgstr "" #: standalone/drakbackup:1959 #, c-format msgid "" "Delete incremental or differential\n" " backups older than N days\n" " (0 is keep all backups) to save space" msgstr "" #: standalone/drakbackup:2026 #, c-format msgid "CD-R / DVD-R" msgstr "সিডি-আর / ডিভিডি-আর" #: standalone/drakbackup:2031 #, c-format msgid "HardDrive / NFS" msgstr "হার্ডড্রাইভ / এন.এফ.এস." #: standalone/drakbackup:2046 standalone/drakbackup:2047 #: standalone/drakbackup:2052 #, c-format msgid "hourly" msgstr "প্রতিঘন্টা" #: standalone/drakbackup:2046 standalone/drakbackup:2048 #: standalone/drakbackup:2053 #, c-format msgid "daily" msgstr "প্রতিদিন" #: standalone/drakbackup:2046 standalone/drakbackup:2049 #: standalone/drakbackup:2054 #, c-format msgid "weekly" msgstr "প্রতিসপ্তাহ" #: standalone/drakbackup:2046 standalone/drakbackup:2050 #: standalone/drakbackup:2055 #, c-format msgid "monthly" msgstr "প্রতিমাস" #: standalone/drakbackup:2046 standalone/drakbackup:2051 #: standalone/drakbackup:2056 #, c-format msgid "custom" msgstr "স্বনির্বাচিত" #: standalone/drakbackup:2060 #, c-format msgid "January" msgstr "জানুয়ারি" #: standalone/drakbackup:2060 #, c-format msgid "February" msgstr "ফেব্রুয়ারি" #: standalone/drakbackup:2060 #, c-format msgid "March" msgstr "মার্চ" #: standalone/drakbackup:2061 #, c-format msgid "April" msgstr "এপ্রিল" #: standalone/drakbackup:2061 #, c-format msgid "May" msgstr "মে" #: standalone/drakbackup:2061 #, c-format msgid "June" msgstr "জুন" #: standalone/drakbackup:2061 #, c-format msgid "July" msgstr "জুলাই" #: standalone/drakbackup:2061 #, c-format msgid "August" msgstr "আগস্ট" #: standalone/drakbackup:2061 #, c-format msgid "September" msgstr "সেপ্টেম্বর" #: standalone/drakbackup:2062 #, c-format msgid "October" msgstr "অক্টোবর" #: standalone/drakbackup:2062 #, c-format msgid "November" msgstr "নভেম্বর" #: standalone/drakbackup:2062 #, c-format msgid "December" msgstr "ডিসেম্বর" #: standalone/drakbackup:2065 #, c-format msgid "Sunday" msgstr "রবিবার" #: standalone/drakbackup:2065 #, c-format msgid "Monday" msgstr "সোমবার" #: standalone/drakbackup:2065 #, c-format msgid "Tuesday" msgstr "মঙ্গলবার" #: standalone/drakbackup:2066 #, c-format msgid "Wednesday" msgstr "বুধবার" #: standalone/drakbackup:2066 #, c-format msgid "Thursday" msgstr "বৃহস্পতিবার" #: standalone/drakbackup:2066 #, c-format msgid "Friday" msgstr "শুক্রবার" #: standalone/drakbackup:2066 #, c-format msgid "Saturday" msgstr "শনিবার" #: standalone/drakbackup:2098 #, c-format msgid "Use daemon" msgstr "ডেইমন ব্যবহার করো" #: standalone/drakbackup:2102 #, c-format msgid "Please choose the time interval between each backup" msgstr "অনুগ্রহপূর্বক যে সময়ের ব্যবধানে ব্যাক-আপ করা হবে তা বেছে নিন" # FIXME #: standalone/drakbackup:2108 #, c-format msgid "Custom setup/crontab entry:" msgstr "স্বনির্বাচিত বৈশিষ্ট্য/ক্রনট্যাব এন্ট্রি:" #: standalone/drakbackup:2113 #, c-format msgid "Minute" msgstr "মিনিট" #: standalone/drakbackup:2117 #, c-format msgid "Hour" msgstr "ঘন্টা" #: standalone/drakbackup:2121 #, c-format msgid "Day" msgstr "দিন" #: standalone/drakbackup:2125 #, c-format msgid "Month" msgstr "মাস" # FIXME: ভাল হইলো না ;-( # শনিবার ব্যতীত যে কোন দিন #: standalone/drakbackup:2129 #, c-format msgid "Weekday" msgstr "সাপ্তাহিক দিন" #: standalone/drakbackup:2135 #, c-format msgid "Please choose the media for backup." msgstr "ব্যাক-আপ-এর কাজে যে মিডিয়া ব্যবহার করা হবে তা বেছে নিন।" #: standalone/drakbackup:2141 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "অনুগ্রহপূর্বক নিশ্চিত হন যে সার্ভিস তালিকার ক্রন ডেইমন অন্তর্ভুক্ত রয়েছে।" # সাম #: standalone/drakbackup:2142 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "যদি আপনার মেশিন সর্বক্ষণ চালু না থাকে, তবে anacron ইনস্টল করতে পারেন।" #: standalone/drakbackup:2143 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "লক্ষ করুন যে, বর্তমানে সকল 'নেট' মিডিয়াই হার্ডড্রাইভকে ব্যবহার করে।" #: standalone/drakbackup:2190 #, c-format msgid "Please choose the compression type" msgstr "অনুগ্রহপূর্বক কমপ্রেশনের ধরন বেছে নিন" #: standalone/drakbackup:2194 #, c-format msgid "Use .backupignore files" msgstr ".backupignore ফাইল ব্যবহার করো" #: standalone/drakbackup:2196 #, c-format msgid "Send mail report after each backup to:" msgstr "প্রতিবার ব্যাক-আপ তৈরির পর এই ঠিকানায় মেইল প্রেরণ করো:" #: standalone/drakbackup:2202 #, c-format msgid "Return address for sent mail:" msgstr "" #: standalone/drakbackup:2208 #, c-format msgid "SMTP server for mail:" msgstr "মেইল প্রেরণের জন্য এস.এম.টি.পি. সার্ভার:" #: standalone/drakbackup:2213 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "অন্য কোন মিডিয়ায় ব্যাক-আপ তৈরি হয়ে যাওয়ার পর হার্ডড্রাইভ থেকে টার ফাইল মুছে ফেলো" #: standalone/drakbackup:2256 #, c-format msgid "What" msgstr "কি" #: standalone/drakbackup:2261 #, c-format msgid "Where" msgstr "কোথায়" #: standalone/drakbackup:2266 #, c-format msgid "When" msgstr "কখন" #: standalone/drakbackup:2271 #, c-format msgid "More Options" msgstr "আরো অপশন" #: standalone/drakbackup:2284 #, c-format msgid "Backup destination not configured..." msgstr "ব্যাপ-আপ-এর গন্তব্য কনফিগার করা হয় নি..." #: standalone/drakbackup:2304 standalone/drakbackup:4228 #, c-format msgid "Drakbackup Configuration" msgstr "ড্রেকব্যাক-আপ কনফিগারেশন" #: standalone/drakbackup:2320 #, c-format msgid "Please choose where you want to backup" msgstr "অনুগ্রহপূর্বক যে স্থানে ব্যাক-আপ রাখতে চান তা বেছে নিন" # FIXME #: standalone/drakbackup:2323 #, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "সকল মিডিয়ার জন্য ব্যাক-আপ প্রস্তুতিতে ব্যবহৃত হার্ডড্রাইভ" #: standalone/drakbackup:2323 #, c-format msgid "Across Network" msgstr "নেটওয়ার্কব্যাপী" #: standalone/drakbackup:2323 #, c-format msgid "On CD-R" msgstr "সিডি-আর এ" #: standalone/drakbackup:2323 #, c-format msgid "On Tape Device" msgstr "টেপ ড্রাইভ এ" #: standalone/drakbackup:2369 #, c-format msgid "Backup Users" msgstr "ব্যবহারকারীদের তথ্য ব্যাক-আপ করো" #: standalone/drakbackup:2370 #, c-format msgid " (Default is all users)" msgstr " (স্বাভাবিক অবস্থায় সকল ব্যবহারকারীর তথ্য ব্যাক-আপ করা হয়)" #: standalone/drakbackup:2383 #, c-format msgid "Please choose what you want to backup" msgstr "অনুগ্রহপূর্বক যে সব জিনিষ ব্যাক-আপ করতে চা তা বেছে নিন" #: standalone/drakbackup:2384 #, c-format msgid "Backup System" msgstr "ব্যাক-আপ সিস্টেম" #: standalone/drakbackup:2386 #, c-format msgid "Select user manually" msgstr "নিজ হাতে ব্যবহারকারী বেছে নিন" #: standalone/drakbackup:2415 #, c-format msgid "Please select data to backup..." msgstr "অনুগ্রহপূর্বক যে সব তথ্য ব্যাক-আপ করতে চান তা বেছে নিন..." #: standalone/drakbackup:2487 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "ব্যাক-আপ উত্‍স: \n" #: standalone/drakbackup:2488 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- সিস্টেম ফাইল:\n" #: standalone/drakbackup:2490 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- ব্যবহারকারীর ফাইল:\n" #: standalone/drakbackup:2492 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- অন্যান্য ফাইল:\n" #: standalone/drakbackup:2494 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "হার্ডড্রাইভের যে স্থানে সংরক্ষণ করা হয়েছে তার পাথ: %s\n" #: standalone/drakbackup:2495 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "\tডিস্কের ব্যবহার %s মেগাবাইটে সীমাবদ্ধ রাখুন\n" #: standalone/drakbackup:2496 #, c-format msgid "\tDelete backups older than %s day(s)\n" msgstr "" #: standalone/drakbackup:2499 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- ব্যাক-আপ তৈরি সম্পন্ন হওয়ার পর হার্ডড্রাইভ থেকে টার ফাইল মুছে ফেলো।\n" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "সিডি'তে লেখো" #: standalone/drakbackup:2505 #, c-format msgid "RW" msgstr "রিড-রাইট" #: standalone/drakbackup:2506 #, c-format msgid " on device: %s" msgstr " এই ডিভাইসে: %s" #: standalone/drakbackup:2507 #, c-format msgid " (multi-session)" msgstr " (মাল্টিসেশন)" #: standalone/drakbackup:2508 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- এই ডিভাইসের টেপের সংরক্ষণ করো: %s" #: standalone/drakbackup:2509 #, c-format msgid "\t\tErase=%s" msgstr "\t\tমোছো=%s" #: standalone/drakbackup:2511 #, c-format msgid "\tBackup directly to Tape\n" msgstr "\tসরাসরি টেপে ব্যাকআপ\n" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- %s এর মাধ্যমে এই হোস্টে সংরক্ষণ করো: %s\n" #: standalone/drakbackup:2514 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t ব্যবহারকারীর নাম: %s\n" "\t\t পাথ: %s \n" #: standalone/drakbackup:2515 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- অপশন:\n" #: standalone/drakbackup:2516 #, c-format msgid "\tDo not include System Files\n" msgstr "\tসিস্টেম ফাইল অন্তর্ভুক্ত করবে না\n" #: standalone/drakbackup:2518 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tব্যাক-আপকৃত ফাইলসমূহ টার ও bzip2 ব্যবহার করে\n" #: standalone/drakbackup:2519 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tব্যাক-আপকৃত ফাইলসমূহ টার ও gzip ব্যবহার করে\n" #: standalone/drakbackup:2520 #, c-format msgid "\tBackups use tar only\n" msgstr "\tব্যাক-আপকৃত ফাইলসমূহ শুধু টার ব্যবহার করে\n" #: standalone/drakbackup:2522 #, c-format msgid "\tUse .backupignore files\n" msgstr "\t.backupignore ফাইল ব্যবহার করো\n" #: standalone/drakbackup:2523 #, c-format msgid "\tSend mail to %s\n" msgstr "\t%s-কে মেইল প্রেরণ করো\n" #: standalone/drakbackup:2524 #, c-format msgid "\tSend mail from %s\n" msgstr "" #: standalone/drakbackup:2525 #, c-format msgid "\tUsing SMTP server %s\n" msgstr "\t%s এস.এম.টি.পি. সার্ভার ব্যবহার করে\n" #: standalone/drakbackup:2527 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- ডেইমন, %s ভায়া:\n" #: standalone/drakbackup:2528 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-হার্ডড্রাইভ।\n" #: standalone/drakbackup:2529 #, c-format msgid "\t-CD-R.\n" msgstr "\t-সিডি-আর।\n" #: standalone/drakbackup:2530 #, c-format msgid "\t-Tape \n" msgstr "\t-টেপ \n" #: standalone/drakbackup:2531 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-এফ.টি.পি.'র মাধ্যমে নেটওয়ার্ক।\n" #: standalone/drakbackup:2532 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-এস.এস.এইচ.-এর মাধ্যমে নেটওয়ার্ক।\n" #: standalone/drakbackup:2533 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-rsync-এর মাধ্যমে নেটওয়ার্ক।\n" #: standalone/drakbackup:2535 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "কোন কনফিগারেশন পাওয়া যায় নি, অনুগ্রহপূর্বক 'উইজার্ড' বা 'অগ্রসর' ক্লিক করুন।\n" #: standalone/drakbackup:2540 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "যে সকল তথ্য ব্যাক-আপ থেকে পুনরুদ্ধার করতে হবে তাদের তালিকা:\n" "\n" #: standalone/drakbackup:2542 #, c-format msgid "- Restore System Files.\n" msgstr "- ব্যাক-আপ থেকে সিস্টেম ফাইলসমূহ পুনরুদ্ধার করো।\n" # FIXME #: standalone/drakbackup:2544 standalone/drakbackup:2554 #, c-format msgid " - from date: %s %s\n" msgstr " - এই তারিখ হতে: %s %s\n" #: standalone/drakbackup:2547 #, c-format msgid "- Restore User Files: \n" msgstr "- ব্যাক-আপ থেকে ব্যবহারকারীর ফাইলসমূহ পুনরুদ্ধার করো।\n" #: standalone/drakbackup:2552 #, c-format msgid "- Restore Other Files: \n" msgstr "- ব্যাক-আপ থেকে অন্যান্য ফাইলসমূহ পুনরুদ্ধার করো।\n" #: standalone/drakbackup:2731 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "ক্ষতিগ্রস্থ তথ্যের তালিকা:\n" "\n" #: standalone/drakbackup:2733 #, c-format msgid "Please uncheck or remove it on next time." msgstr "অনুগ্রহপূর্বক পরবর্তী বার এটির টিক উঠিয়ে দিন বা একে অপসারণ করুন। " #: standalone/drakbackup:2743 #, c-format msgid "Backup files are corrupted" msgstr "ব্যাক-আপকৃত ফাইলসমূহ ক্ষতিগ্রস্থ" #: standalone/drakbackup:2764 #, c-format msgid " All of your selected data have been " msgstr " আপনার বাছাইকৃত সকল তথ্য " #: standalone/drakbackup:2765 #, c-format msgid " Successfully Restored on %s " msgstr " সফলভাবে ব্যাক-আপ থেকে পুনরুদ্ধার করে %s-এ রাখা হয়েছে " #: standalone/drakbackup:2885 #, c-format msgid " Restore Configuration " msgstr " ব্যাক-আপ থেকে পুনরুদ্ধার প্রক্রিয়ার কনফিগারেশন " #: standalone/drakbackup:2913 #, c-format msgid "OK to restore the other files." msgstr "অন্যান্য ফাইল থেকে ব্যাক-আপ থেকে পুনরুদ্ধারের জন্য ঠিক আছে চাপুন।" #: standalone/drakbackup:2929 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "ব্যবহারকারীর যে তালিকা ব্যাক-আপ থেকে পুরুদ্ধার করতে হবে (শুধুমাত্র প্রত্যেক " "ব্যবহারকারীর অতি সাম্প্রতিক তথ্যাবলীই গুরুত্বপূর্ণ)" #: standalone/drakbackup:2994 #, c-format msgid "Please choose the date to restore:" msgstr "অনুগ্রহপূর্বক ব্যাক-আপ থেকে যে সকল তথ্য পুনরুদ্ধার করতে চান তা বেছে নিন:" #: standalone/drakbackup:3031 #, c-format msgid "Restore from Hard Disk." msgstr "হার্ডডিস্ক থেকে পুনরুদ্ধার করো।" #: standalone/drakbackup:3033 #, c-format msgid "Enter the directory where backups are stored" msgstr "যে ডিরেক্টরিতে ব্যাক-আপ রাখা হয়েছে তাতে প্রবেশ করুন" #: standalone/drakbackup:3037 #, c-format msgid "Directory with backups" msgstr "ব্যাক-আপ ধারনকারী ডিরেক্টরি" #: standalone/drakbackup:3091 #, c-format msgid "Select another media to restore from" msgstr "ব্যাক-আপ থেকে তথ্য পুনরুদ্ধারের জন্য অপর একটি মিডিয়া বেছে নিন" #: standalone/drakbackup:3093 #, c-format msgid "Other Media" msgstr "অন্যান্য মিডিয়া" #: standalone/drakbackup:3098 #, c-format msgid "Restore system" msgstr "ব্যাক-আপ থেকে সিস্টেম ফাইল পুনরুদ্ধার করো" #: standalone/drakbackup:3099 #, c-format msgid "Restore Users" msgstr "ব্যাক-আপ থেকে ব্যবহারকারীর ফাইল পুনরুদ্ধার করো" #: standalone/drakbackup:3100 #, c-format msgid "Restore Other" msgstr "ব্যাক-আপ থেকে অন্যান্য ফাইল পুনরুদ্ধার করো" #: standalone/drakbackup:3102 #, c-format msgid "Select path to restore (instead of /)" msgstr "" "ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করে যেখানে রাখা হবে তার পাথ বেছে নিন (/ এর পরিবর্তে)" #: standalone/drakbackup:3106 standalone/drakbackup:3388 #, c-format msgid "Path To Restore To" msgstr "ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করে যেখানে রাখা হবে" #: standalone/drakbackup:3109 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "ব্যাক-আপ থেকে পুরুদ্ধারের পূর্বে নতুন করে ব্যাক-আপ করো (শুধুমাত্র বৃদ্ধিঘটিত ব্যাক-আপ এর " "ক্ষেত্রে প্রযোজ্য।)" #: standalone/drakbackup:3111 #, c-format msgid "Remove user directories before restore." msgstr "ব্যাক-আপ থেকে পুরুদ্ধারের পূর্বে ব্যবহারকারীর ডিরেক্টরি অপসারণ করো।" #: standalone/drakbackup:3196 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" "ফাইলের নাম অনুসন্ধানে যে পঙ্‌ক্তি ব্যবহার করা হবে (ফাঁকা পঙ্‌ক্তি সকল নামকে নির্দেশ " "করবে):" #: standalone/drakbackup:3199 #, c-format msgid "Search Backups" msgstr "ব্যাক-আপ অনুসন্ধান করো" #: standalone/drakbackup:3217 #, c-format msgid "No matches found..." msgstr "কোন মিল পাওয়া যায় নি..." # FIXME #: standalone/drakbackup:3221 #, c-format msgid "Restore Selected" msgstr "বাছাইকৃতদের থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3356 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" "ব্যাক-আপ ফাইল দেখার জন্য তারিখ/সময়-এ ক্লিক করুন।\n" "একাধিক ফাইল বাছাই করার জন্য Ctrl চেপে ধরে ফাইলে ক্লিক করুন।" #: standalone/drakbackup:3362 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "বাছাইকৃত তালিকা এন্ট্রি থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3371 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "বাছাইকৃত ফাইল থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3448 #, c-format msgid "Backup files not found at %s." msgstr "%s-এ কোন ব্যাক-আপ ফাইল পাওয়া যায় নি।" #: standalone/drakbackup:3461 #, c-format msgid "Restore From CD" msgstr "সিডি থেকে পুনরুদ্ধার করো" #: standalone/drakbackup:3461 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "ভলিউম লেবেল %s সম্বলিত সিডি-কে সিডি ড্রাইভে ঢুকিয়ে\n" "/mnt/cdrom অবস্থানে মাউন্ট করো" #: standalone/drakbackup:3463 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "সিডি'র লেবেল সঠিক নয়। এই ডিস্কটি %s লেবেল সম্বলিত।" #: standalone/drakbackup:3473 #, c-format msgid "Restore From Tape" msgstr "টেপ থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3473 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "%s টেপ ড্রাইভ যন্ত্রে %s ভলিউম \n" "লেবেলের প্রবেশ করান" #: standalone/drakbackup:3475 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "সঠিক টেপ লেবেল নয়। টেপটির লেবেল হল %s ।" #: standalone/drakbackup:3486 #, c-format msgid "Restore Via Network" msgstr "নেটওয়ার্কের সাহায্যে ব্যাক-আপ থেকে পুনরুদ্ধার করো" #: standalone/drakbackup:3486 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "এই নেটওয়ার্ক প্রোটোকলের সাহায্যে ব্যাক-আপ থেকে পুনরুদ্ধার করো: %s" #: standalone/drakbackup:3487 #, c-format msgid "Host Name" msgstr "হোস্ট নাম" #: standalone/drakbackup:3488 #, c-format msgid "Host Path or Module" msgstr "হোস্ট পাথ বা মডিউল" #: standalone/drakbackup:3495 #, c-format msgid "Password required" msgstr "পাসওয়ার্ড প্রয়োজন" #: standalone/drakbackup:3501 #, c-format msgid "Username required" msgstr "ব্যবহারকারীর নাম প্রয়োজন" #: standalone/drakbackup:3504 #, c-format msgid "Hostname required" msgstr "হোস্টনাম প্রয়োজন" #: standalone/drakbackup:3509 #, c-format msgid "Path or Module required" msgstr "পাথ বা মডিউল প্রয়োজন" #: standalone/drakbackup:3522 #, c-format msgid "Files Restored..." msgstr "ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করা হয়েছে..." #: standalone/drakbackup:3525 #, c-format msgid "Restore Failed..." msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের প্রচেষ্টা ব্যর্থ হয়েছে..." #: standalone/drakbackup:3543 #, c-format msgid "%s not retrieved..." msgstr "%s-কে ফিরে পাওয়া যায় নি..." #: standalone/drakbackup:3764 standalone/drakbackup:3833 #, c-format msgid "Search for files to restore" msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের উদ্দেশ্যে ফাইল অনুসন্ধান" #: standalone/drakbackup:3768 #, c-format msgid "Restore all backups" msgstr "ব্যাক-আপ থেকে সব কিছু পুনরুদ্ধার করো" #: standalone/drakbackup:3776 #, c-format msgid "Custom Restore" msgstr "ব্যাক-আপ থেকে স্বনির্বাচনের মাধ্যমে পুনরুদ্ধার করো" #: standalone/drakbackup:3780 standalone/drakbackup:3829 #, c-format msgid "Restore From Catalog" msgstr "তালিকা থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3801 #, c-format msgid "Unable to find backups to restore...\n" msgstr "পুনরুদ্ধার করার মত কোন ব্যাক-আপ পাওয়া যাচ্ছে না...\n" #: standalone/drakbackup:3802 #, c-format msgid "Verify that %s is the correct path" msgstr "নিশ্চিত হন যে সঠিক পাথ হল %s" #: standalone/drakbackup:3803 #, c-format msgid " and the CD is in the drive" msgstr " এবং সিডি'টি ড্রাইভে রয়েছে" #: standalone/drakbackup:3805 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" "মাউন্ট করার অযোগ্য মিডিয়ায় ব্যাক-আপ রয়েছে - তালিকা ব্যবহার করে ব্যাক-আপ থেকে " "পুনরুদ্ধার করো" #: standalone/drakbackup:3821 #, c-format msgid "CD in place - continue." msgstr "সিডি যথাস্থানে রয়েছে - এগিয়ে যাও।" #: standalone/drakbackup:3826 #, c-format msgid "Browse to new restore repository." msgstr "নতুন জমা করা ভান্ডার ব্রাউজ করতে।" #: standalone/drakbackup:3827 #, c-format msgid "Directory To Restore From" msgstr "যে ডিরেক্টরি থেকে ব্যাক-আপ পুনরুদ্ধার করো" #: standalone/drakbackup:3863 #, c-format msgid "Restore Progress" msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের অগ্রগতি" #: standalone/drakbackup:3974 #, c-format msgid "Build Backup" msgstr "ব্যাক-আপ তৈরি করো" #: standalone/drakbackup:4007 standalone/drakbackup:4327 #, c-format msgid "Restore" msgstr "ব্যাক-আপ থেকে পুনরুদ্ধার" #: standalone/drakbackup:4095 standalone/harddrake2:478 #, c-format msgid "The following packages need to be installed:\n" msgstr "নিম্নোক্ত প্যাকেজসমূহ ইনস্টল করা প্রয়োজন:\n" #: standalone/drakbackup:4122 #, c-format msgid "Please select data to restore..." msgstr "অনুগ্রহপূর্বক যে সব তথ্য ব্যাক-আপ থেকে পুনরুদ্ধার করতে চান তা বেছে নিন..." #: standalone/drakbackup:4162 #, c-format msgid "Backup system files" msgstr "সিস্টেম ফাইলের ব্যাক-আপ তৈরি করো" #: standalone/drakbackup:4165 #, c-format msgid "Backup user files" msgstr "ব্যবহারকারীর ফাইলের ব্যাক-আপ তৈরি করো" #: standalone/drakbackup:4168 #, c-format msgid "Backup other files" msgstr "অন্যান্য ফাইলের ব্যাক-আপ তৈরি করো" #: standalone/drakbackup:4171 standalone/drakbackup:4205 #, c-format msgid "Total Progress" msgstr "মোট অগ্রগতি" #: standalone/drakbackup:4197 #, c-format msgid "Sending files by FTP" msgstr "এফ-টি-পি ব্যবহার করে ফাইল প্রেরণ করা হচ্ছে" #: standalone/drakbackup:4200 #, c-format msgid "Sending files..." msgstr "ফাইল প্রেরণ করা হচ্ছে..." #: standalone/drakbackup:4270 #, c-format msgid "Backup Now from configuration file" msgstr "এখন কনফিগারেশন ফাইল থেকে ব্যাক-আপ তৈরি করো" #: standalone/drakbackup:4275 #, c-format msgid "View Backup Configuration." msgstr "ব্যাক-আপ প্রক্রিয়ার কনফিগারেশন দেখাও।" #: standalone/drakbackup:4301 #, c-format msgid "Wizard Configuration" msgstr "উইজার্ড কনফিগারেশন" #: standalone/drakbackup:4306 #, c-format msgid "Advanced Configuration" msgstr "অগ্রসর কনফিগারেশন" #: standalone/drakbackup:4311 #, c-format msgid "View Configuration" msgstr "কনফিগারেশন দেখাও" #: standalone/drakbackup:4315 #, c-format msgid "View Last Log" msgstr "LastLog দেখাও" #: standalone/drakbackup:4320 #, c-format msgid "Backup Now" msgstr "এখন ব্যাক-আপ করো" #: standalone/drakbackup:4324 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "কোন কনফিগারেশন ফাইল পাওয়া যায় নি \n" "অনুগ্রহপূর্বক 'উইজার্ড' বা 'অগ্রসর' ক্লিক করুন।" #: standalone/drakbackup:4344 standalone/drakbackup:4347 #, c-format msgid "Drakbackup" msgstr "ড্রেকব্যাক-আপ" #: standalone/drakboot:76 standalone/harddrake2:190 standalone/harddrake2:191 #: standalone/harddrake2:192 standalone/logdrake:69 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/ফাইল (_ফ)" #: standalone/drakboot:77 standalone/logdrake:75 #, c-format msgid "/File/_Quit" msgstr "/ফাইল/প্রস্থান (_প)" # X11 keysyms must be used here; # bengali letter "প" is 0x10009aa #: standalone/drakboot:77 standalone/harddrake2:192 standalone/logdrake:75 #: standalone/printerdrake:140 #, c-format msgid "Q" msgstr "0x10009aa" #: standalone/drakboot:117 #, c-format msgid "Text only" msgstr "" #: standalone/drakboot:118 #, c-format msgid "Verbose" msgstr "" #: standalone/drakboot:119 #, c-format msgid "Silent" msgstr "" #: standalone/drakboot:126 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" "আপনার সিস্টেমের বুটলোডার ফ্রেমবাফার মোডে নেই। গ্রাফিকাল বুট পদ্ধতি সক্রিয় করার জন্য " "গ্রাফিকাল বুট কনফিগারেশন থেকে একটি গ্রাফিকাল ভিডিও মোড বেছে নিন।" #: standalone/drakboot:127 #, c-format msgid "Do you want to configure it now?" msgstr "আপনি কি এক্ষুনি কনফিগার করতে চান?" #: standalone/drakboot:136 #, c-format msgid "Install themes" msgstr "থিম ইনস্টল করো" #: standalone/drakboot:138 #, c-format msgid "Graphical boot theme selection" msgstr "গ্রাফিকাল বুট থিম কনফিগারেশন" #: standalone/drakboot:143 #, c-format msgid "Theme" msgstr "থিম" # FIXME #: standalone/drakboot:146 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "কনসোলে\n" "থিম দেখাও" #: standalone/drakboot:151 #, c-format msgid "Create new theme" msgstr "নতুন থিম তৈরি করো" #: standalone/drakboot:183 #, c-format msgid "Default user" msgstr "ডিফল্ট ব্যবহারকারী" #: standalone/drakboot:184 #, c-format msgid "Default desktop" msgstr "ডিফল্ট ডেস্কটপ" #: standalone/drakboot:187 #, c-format msgid "No, I do not want autologin" msgstr "না, আমি স্বয়ংক্রিয়ভাবে লগ-ইন করতে চাই না" # FIXME #: standalone/drakboot:188 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "হ্যাঁ, আমি স্বয়ংক্রিয়ভাবে এটিতে লগ-ইন করতে চাই (ব্যবহারকারী, ডেস্কটপ)" #: standalone/drakboot:195 #, c-format msgid "System mode" msgstr "সিস্টেম মোড" #: standalone/drakboot:198 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "সিস্টেম চালু করার সময় গ্রাফিকাল মোড সচল করো" #: standalone/drakboot:264 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" "অনুগ্রহ করে একটি ভিডিও মোড বেছে নিন, এটার নিচের প্রত্যেক বাছাইকৃত বুট এন্ট্রিতে " "প্রভাব ফেলবে।\n" "নিশ্চিত হোন যে আপনার ভিডিও কার্ড আপনার বেছে নেয়া মোড সমর্থন করে কিনা।" #: standalone/drakbug:41 #, c-format msgid "Mandriva Linux Bug Report Tool" msgstr "ম্যান্ড্রিব লিনাক্স ত্রুটি রিপোর্টকারী টুল" #: standalone/drakbug:46 #, c-format msgid "Mandriva Linux Control Center" msgstr "ম্যান্ড্রিব লিনাক্স নিয়ন্ত্রন (control) সেন্টার" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "সমন্বয়কারী সফটওয়ার" #: standalone/drakbug:49 standalone/drakbug:152 #, c-format msgid "Standalone Tools" msgstr "স্বয়ংসম্পূর্ণ সফটওয়ার" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "হার্ডড্রেক" #: standalone/drakbug:51 #, c-format msgid "Mandriva Online" msgstr "ম্যান্ড্রিব অনলাইন (Mandriva Online)" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "মেনুড্রেক" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec" # মিলিসেকেন্ড, Fix me #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "দূর নিয়ন্ত্রণ" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "সফটওয়ার ব্যবস্থাপক" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" # FIXME #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "উইন্ডোজ মাইগ্রেশন টুল" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "ইউজারড্রেক" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "কনফিগারেশন উইজার্ড" # সাম #: standalone/drakbug:81 #, c-format msgid "Select Mandriva Tool:" msgstr "Mandriva টুল বেছে নিন:" # সাম #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" "অথবা অ্যাপলিকেশনের নাম\n" "(অথবা সম্পূর্ণ পাথ):" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "প্যাকেজ অনুসন্ধান করো" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "প্যাকেজ:" #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "কার্ণেল:" # সাম #: standalone/drakbug:101 #, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" "ত্রুটি রিপোর্ট প্রেরণের জন্য 'রিপোর্ট' বাটনে ক্লিক করুন।\n" "এটি %s এর ওপর একটি ওয়েব ব্রাউজার চালু করবে যেখানে আপনাকে একটি ফর্ম পূরণ করতে " "হবে। এরপর উল্লেখিত তথ্যাবলী ঐ সার্ভারে স্থানান্তরিত হবে। \n" "আপনার রিপোর্টে lspci আউটপুট, কার্নেল সংস্করণ এবং /proc/cpuinfo জাতীয় প্রয়োজনীয় " "তথ্য সংযুক্ত করুন।" #: standalone/drakbug:107 #, c-format msgid "Report" msgstr "রিপোর্ট" #: standalone/drakbug:162 #, c-format msgid "Not installed" msgstr "ইনস্টল করা নেই" #: standalone/drakbug:174 #, c-format msgid "Package not installed" msgstr "প্যাকেজ ইনস্টল করা নেই" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "ড্রেকঘড়ি" #: standalone/drakclock:39 #, c-format msgid "not defined" msgstr "অনির্দিষ্ট" #: standalone/drakclock:41 #, c-format msgid "Change Time Zone" msgstr "সময় অঞ্চল পরিবর্তন করো" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "সময়-অঞ্চল - ড্রেকঘড়ি" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "জি.এম.টি. - ড্রেকঘড়ি" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "আপনার কম্পিউটারের হার্ডওয়ার-ক্লক কি জি.এম.টি. সময় অনুযায়ী চলছে?" #: standalone/drakclock:75 #, c-format msgid "Network Time Protocol" msgstr "নেটওয়ার্ক টাইম প্রোটোকল" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" "আপনার কম্পিউটারটি এন.টি.পি. ব্যবহার করে কোন\n" "দূরবর্তী টাইম সার্ভারের সাথে সময় মিলিয়ে নিতে পারে" #: standalone/drakclock:78 #, c-format msgid "Enable Network Time Protocol" msgstr "নেটওয়ার্ক টাইম প্রোটোকল সক্রিয় করো" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "সার্ভার:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "%s এর সাথে সিন্‌ক্রোনাইজ করতে পারছে না।" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "রিসেট" #: standalone/drakclock:224 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "" "নেটওয়ার্ক টাইম প্রোটোকল সক্রিয় করার জন্য\n" "আমাদের এনটি.পি. প্যাকেজ ইনস্টল করতে হবে\n" "\n" "আপনি কি এনটি.পি. ইনস্টল করতে চান ?" #: standalone/drakconnect:80 #, c-format msgid "Network configuration (%d adapters)" msgstr "নেটওয়ার্ক কনফিগারেশন (%d অ্যাডাপ্টার)" #: standalone/drakconnect:89 standalone/drakconnect:803 #: standalone/drakroam:163 #, c-format msgid "Gateway:" msgstr "গেটওয়ে:" #: standalone/drakconnect:89 standalone/drakconnect:803 #, c-format msgid "Interface:" msgstr "ইন্টারফেস:" #: standalone/drakconnect:93 standalone/net_monitor:117 #, c-format msgid "Wait please" msgstr "অনুগ্রহপূর্বক অপেক্ষা করুন" #: standalone/drakconnect:109 #, c-format msgid "Interface" msgstr "ইন্টারফেস" #: standalone/drakconnect:109 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "অবস্থা" #: standalone/drakconnect:126 #, c-format msgid "Hostname: " msgstr "হোস্টনাম: " #: standalone/drakconnect:128 #, c-format msgid "Configure hostname..." msgstr "হোস্টনাম কনফিগার করো..." #: standalone/drakconnect:142 standalone/drakconnect:841 #, c-format msgid "LAN configuration" msgstr "ল্যান কনফিগারেশন" #: standalone/drakconnect:147 #, c-format msgid "Configure Local Area Network..." msgstr "স্থানীয় নেটওয়ার্ক কনফিগার করো..." #: standalone/drakconnect:155 standalone/drakconnect:237 #: standalone/drakconnect:241 standalone/drakhosts:263 #, c-format msgid "Apply" msgstr "প্রয়োগ" #: standalone/drakconnect:188 #, c-format msgid "Manage connections" msgstr "সংযোগ ব্যবস্থাপনা" #: standalone/drakconnect:215 #, c-format msgid "Device selected" msgstr "বাছাইকৃত ডিভাইস" #: standalone/drakconnect:296 #, c-format msgid "IP configuration" msgstr "আই.পি. কনফিগারেশন" #: standalone/drakconnect:335 #, c-format msgid "DNS servers" msgstr "ডি.এন.এস. সার্ভার" #: standalone/drakconnect:343 #, c-format msgid "Search Domain" msgstr "অনুসন্ধান ক্ষেত্র (Domain)" #: standalone/drakconnect:351 #, c-format msgid "static" msgstr "স্থির" #: standalone/drakconnect:351 standalone/drakroam:144 #, c-format msgid "DHCP" msgstr "ডি.এইচ.সি.পি." #: standalone/drakconnect:515 #, c-format msgid "Flow control" msgstr "ফ্লো কনট্রোল" #: standalone/drakconnect:516 #, c-format msgid "Line termination" msgstr "লাইন টার্মিনেশন" #: standalone/drakconnect:527 #, c-format msgid "Modem timeout" msgstr "মডেম টাইম-আউট" #: standalone/drakconnect:531 #, c-format msgid "Use lock file" msgstr "লক (Lock) ফাইল ব্যবহার করো" #: standalone/drakconnect:533 #, c-format msgid "Wait for dialup tone before dialing" msgstr "ডায়াল করার পূর্বে ডায়াল টোনের জন্য অপেক্ষা করো" #: standalone/drakconnect:536 #, c-format msgid "Busy wait" msgstr "ব্যস্ততার অপেক্ষা" #: standalone/drakconnect:541 #, c-format msgid "Modem sound" msgstr "মডেমের শব্দ" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Enable" msgstr "সক্রিয়" #: standalone/drakconnect:542 standalone/drakgw:105 #, c-format msgid "Disable" msgstr "নিষ্ক্রিয়" #: standalone/drakconnect:593 standalone/harddrake2:50 #, c-format msgid "Media class" msgstr "মিডিয়া শ্রেণী" #: standalone/drakconnect:594 #, c-format msgid "Module name" msgstr "মডিউলের নাম" #: standalone/drakconnect:595 #, c-format msgid "Mac Address" msgstr "ম্যাক (Mac) ঠিকানা" #: standalone/drakconnect:596 standalone/harddrake2:28 #: standalone/harddrake2:120 #, c-format msgid "Bus" msgstr "বাস" #: standalone/drakconnect:597 standalone/harddrake2:34 #, c-format msgid "Location on the bus" msgstr "বাস-এ অবস্থান" #: standalone/drakconnect:696 standalone/drakgw:322 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "আপনার কম্পিউটারে কোন ইথারনেট নেটওয়ার্ক অ্যাডাপ্টার সনাক্ত করা যায় নি। অনুগ্রহপূর্বক " "হার্ডওয়ার কনফিগারেশন সফটওয়ারটি চালান।" #: standalone/drakconnect:704 #, c-format msgid "Remove a network interface" msgstr "নেটওয়ার্ক ইন্টারফেস অপসারণ করো" #: standalone/drakconnect:708 #, c-format msgid "Select the network interface to remove:" msgstr "যে নেটওয়ার্ক ইন্টারফেসটি অপসারণ করা হবে তা বেছে নিন:" #: standalone/drakconnect:740 #, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "\"%s\" নেটওয়ার্ক ইন্টারফেস অপসারণের সময় সমস্যা হয়েছে:\n" "\n" "%s" #: standalone/drakconnect:741 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "অভিনন্দন, \"%s\" নেটওয়ার্ক ইন্টারফেসটি সফলভাবে অপসারণ করা গিয়েছে" #: standalone/drakconnect:757 #, c-format msgid "No IP" msgstr "কোন আই.পি. নেই" #: standalone/drakconnect:758 #, c-format msgid "No Mask" msgstr "কোন মাস্ক (Mask) নেই" #: standalone/drakconnect:759 standalone/drakconnect:912 #, c-format msgid "up" msgstr "সক্রিয়" #: standalone/drakconnect:759 standalone/drakconnect:912 #, c-format msgid "down" msgstr "নিষ্ক্রিয়" #: standalone/drakconnect:794 standalone/net_monitor:466 #, c-format msgid "Connected" msgstr "সংযুক্ত" #: standalone/drakconnect:794 standalone/net_monitor:466 #, c-format msgid "Not connected" msgstr "সংযোগহীন" #: standalone/drakconnect:796 #, c-format msgid "Disconnect..." msgstr "সংযোগ বিচ্ছিন্ন করো..." #: standalone/drakconnect:796 #, c-format msgid "Connect..." msgstr "সংযোগ স্থাপন করো..." #: standalone/drakconnect:837 #, c-format msgid "Deactivate now" msgstr "এখনি নিষ্ক্রিয় করো" #: standalone/drakconnect:837 #, c-format msgid "Activate now" msgstr "এখনি সক্রিয় করো" #: standalone/drakconnect:845 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "আপনার সিস্টেমে কোন কনফিগারকৃত ইন্টারফেস নেই।\n" "'কনফিগার' চেপে প্রথমে তাদের কনফিগার করুন" #: standalone/drakconnect:859 #, c-format msgid "LAN Configuration" msgstr "ল্যান কনফিগারেশন" #: standalone/drakconnect:871 #, c-format msgid "Adapter %s: %s" msgstr "অ্যাডাপ্টার %s: %s" #: standalone/drakconnect:880 #, c-format msgid "Boot Protocol" msgstr "বুট প্রোটোকল" #: standalone/drakconnect:881 #, c-format msgid "Started on boot" msgstr "বুট হওয়ার সময় সচল হয়" #: standalone/drakconnect:917 #, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandriva Linux Control Center" msgstr "" "এই ইন্টারফেস এখনো কন্‌ফিগার করা হয়নি।\n" "ম্যান্ড্রিব লিনাক্স নিয়ন্ত্রক কেন্দ্র থেকে সহকারী \"ইন্টারফেস যুক্ত করো\" চালান" # সাম #: standalone/drakconnect:971 standalone/net_applet:55 #, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" "আপনার সিস্টেমে কোন ইন্টারনেট সংযোগ কনফিগার করা নেই।\n" "অনুগ্রহপূর্বক Mandriva Linux নিয়ন্ত্রণকেন্দ্র থেকে \"%s\" চালান।" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:972 standalone/drakroam:42 standalone/net_applet:56 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "নতুন নেটওয়ার্ক ইন্টারফেস সেট আপ করুন (LAN, ISDN, ADSL, ...)" #: standalone/drakconnect:977 #, c-format msgid "Internet connection configuration" msgstr "ইন্টারনেট সংযোগ কনফিগারেশন" #: standalone/drakconnect:995 #, c-format msgid "Third DNS server (optional)" msgstr "তৃতীয় DNS সার্ভার (ঐচ্ছিক)" #: standalone/drakconnect:1017 #, c-format msgid "Internet Connection Configuration" msgstr "ইন্টারনেট সংযোগ কনফিগারেশন" # FIXME #: standalone/drakconnect:1018 #, c-format msgid "Internet access" msgstr "ইন্টারনেট ব্যবহার" #: standalone/drakconnect:1020 standalone/net_monitor:96 #, c-format msgid "Connection type: " msgstr "সংযোগের ধরন: " #: standalone/drakconnect:1023 #, c-format msgid "Status:" msgstr "অবস্থা:" #: standalone/drakedm:40 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "GDM (গুহ্‌নোম ডিসপ্লে ম্যানেজার)" #: standalone/drakedm:41 #, c-format msgid "KDM (KDE Display Manager)" msgstr "KDM (কেডিই ডিসপ্লে ম্যানেজার)" #: standalone/drakedm:42 #, c-format msgid "XDM (X Display Manager)" msgstr "XDM (X ডিসপ্লে ম্যানেজার)" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "একটি ডিসপ্লে ম্যানেজার বেছে নেয়া হচ্ছে" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "X11 ডিসপ্লে ব্যবস্থাপক ব্যবহার করে আপনি চলমান এক্স উইন্ডো সিস্টেমে লগ-ইন \n" "করতে পারেন এবং আপনার \n" "স্থানীয় কম্পিউটারে একাধিক পৃথক এক্স সেশন চালাতে পারেন।" #: standalone/drakedm:72 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "" "পরিবর্তন সম্পন্ন হয়েছে, আপনি কি ডি-এম (ডিসপ্লে ম্যানেজার) সার্ভিস পুনরায় চালু করতে " "চান?" #: standalone/drakedm:73 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" "আপনি সকল চলন্ত প্রোগ্রাম বন্ধ করতে যাচ্ছে এবং আপনার বর্তমান সেশন হারাতে যাচ্ছেন। " "আপনি কি আসলেই নিশ্চিত্‍ যে আপনি dm সার্ভিস পুনরায় চালু করতে যাচ্ছেন?" #: standalone/drakfont:183 #, c-format msgid "Search installed fonts" msgstr "ইনস্টলকৃত ফন্টগুলো খোঁজো" #: standalone/drakfont:185 #, c-format msgid "Unselect fonts installed" msgstr "ইনস্টলকৃত ফন্টগুলো অনির্বাচিত করো" #: standalone/drakfont:208 #, c-format msgid "parse all fonts" msgstr "সকল ফন্টে পার্স করো" # ##সকল ফন্টে দাড়ি,কমা দিন ---Fix me #: standalone/drakfont:210 #, c-format msgid "No fonts found" msgstr "কোন ফন্ট পাওয়া যায়নি" #: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 #: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 #: standalone/drakfont:412 standalone/drakfont:426 #, c-format msgid "done" msgstr "করা হয়েছে" #: standalone/drakfont:223 #, c-format msgid "Could not find any font in your mounted partitions" msgstr "আপনার মাউন্টকৃত পার্টিশনে কোন ফন্ট খুঁজতে পারছে না" #: standalone/drakfont:258 #, c-format msgid "Reselect correct fonts" msgstr "সঠিক ফন্টগুলো পুনরায় নির্বাচিত করো" #: standalone/drakfont:261 #, c-format msgid "Could not find any font.\n" msgstr "কোন ফন্ট খুঁজতে পারেনি।\n" #: standalone/drakfont:271 #, c-format msgid "Search for fonts in installed list" msgstr "ইনস্টলকৃত তালিকায় ফন্ট খোঁজো" #: standalone/drakfont:296 #, c-format msgid "%s fonts conversion" msgstr "%s ফন্টগুলোর পরিবর্তন" #: standalone/drakfont:325 #, c-format msgid "Fonts copy" msgstr "ফন্টগুলোর কপি" #: standalone/drakfont:328 #, c-format msgid "True Type fonts installation" msgstr "ট্রু-টাইপ ফন্টের ইনস্টলেশন" #: standalone/drakfont:335 #, c-format msgid "please wait during ttmkfdir..." msgstr "অনুগ্রহ করে ttmkfdir... করার মুহুর্তে অপেক্ষা করুন" #: standalone/drakfont:336 #, c-format msgid "True Type install done" msgstr "ট্রু-টাইপ ইনস্টল হয়ে গেছে" #: standalone/drakfont:342 standalone/drakfont:357 #, c-format msgid "type1inst building" msgstr "type1inst তৈরী হচ্ছে" #: standalone/drakfont:351 #, c-format msgid "Ghostscript referencing" msgstr "ঘোস্টস্ক্রিপ্ট রেফারেন্স করা হয়েছে" #: standalone/drakfont:361 #, c-format msgid "Suppress Temporary Files" msgstr "অল্পস্থায়ী ফাইলগুলো দমন করো" #: standalone/drakfont:364 #, c-format msgid "Restart XFS" msgstr "XFS পুনরায় চালু করো" #: standalone/drakfont:410 standalone/drakfont:420 #, c-format msgid "Suppress Fonts Files" msgstr "ফন্টের ফাইলগুলো দমন করো" #: standalone/drakfont:422 #, c-format msgid "xfs restart" msgstr "xfs পুনরায় চালু করো" #: standalone/drakfont:430 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "কোন ফন্ট ইনস্টল করার আগে, নিশ্চিত হোন যে সেগুলো আপনার সিস্টেমে ব্যবহার ও ইনস্টল " "করার অধিকার আপনার আছে।\n" "\n" "-আপনি সাধারণ উপায়ে ফন্ট ইনস্টল করতে পারেন। খুব অল্প ক্ষেত্রে, ভুয়া ফন্ট আপনার এক্স(X) " "সার্ভারকে হ্যাং করে ফেলতে পারে।" #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "DrakFont" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "ফন্টের তালিকা" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "সম্বন্ধে" #: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726 #, c-format msgid "Uninstall" msgstr "আন-ইনস্টল" # ## Fix me #: standalone/drakfont:493 #, c-format msgid "Import" msgstr "ইমপোর্ট" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:511 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandriva \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" "স্বত্বাধিকারী (C) ২০০১-২০০২ ম্যান্ড্রিব সফ্‌ট কর্তৃক \n" "\n" "\n" " ডুপন্ট সেবাস্তিয়ান (মূল সংস্করণ)\n" "\n" " চওমেট্টে ডেমিয়েন \n" "\n" " ভিগ্‌নড থিয়েরী " #: standalone/drakfont:520 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" "এই প্রোগ্রামটি বিনামূল্যের সফটওয়্যার; আপনি এটি পুনরায় বিতরণ করতে পারেন এবং/অথবা\n" "পরিবর্তন করতে পারেন জিএনইউ জেনারেল পাবলিক লাইসেন্সের শর্তের অধীন যা ফ্রি " "সফটওয়্যার\n" "ফাউন্ডেশন কর্তৃক প্রকাশিত; সেটা ২য় ভার্সন হতে পারে, অথবা (আপনার পছন্দমত) পরের\n" "কোন ভার্সন হতে পারে।\n" "\n" "\n" "এই প্রোগ্রামটি বিতরণ হচ্ছে এই আশায় যে এটি কাজের উপযোগী হবে, কিন্তু কোনপ্রকার\n" "ওয়ারেন্টি ছাড়াই; এমনকি বিক্রয়যোগ্যতা বা নির্দিষ্ট বিষয়ের উপযুক্ততারও কোন\n" "ওয়ারেন্টি নেই। বিস্তারিত তথ্যের জন্য জিএনইউ জেনারেল পাবলিক লাইসেন্স দেখুন।\n" "\n" "\n" "এই প্রোগ্রামের সাথে জিএনইউ জেনারেল পাবলিক লাইসেন্সের একটি কপি আপনার \n" "পাওয়া উচিত; যদি না পেয়ে থাকেন, তাহলে নিম্ন ঠিকানায় লিখুন- Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." #: standalone/drakfont:536 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" "ধন্যবাদ:\n" "\n" " - pfm2afm: \n" "\t কেন্‌ বোরগেনদেল কর্তৃক:\n" "\t একটি উইন্ডোজ .pfm ফাইলকে একটি .afm (Adobe Font Metrics) ফাইলে রুপান্তরিত " "করুন\n" "\n" " - type1inst:\n" "\t জেম্‌স ম্যাকনিকোল কর্তৃক: \n" "\t type1inst fonts.dir, fonts.scale এবং Fontmap ফাইলগুলো তৈরি করে।\n" "\n" " - ttf2pt1: \n" "\t এন্ড্রু উইক্‌স, ফ্রাংক সিগার্ট, থমাস হেনলিছ, সার্গেই ববকিন কর্তৃক \n" "\t ttf ফন্ট ফাইলগুলোকে afm এবং pfb ফন্টে রুপান্তরিত করুন\n" #: standalone/drakfont:555 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "ফন্টগুলোকে সহায়তা দেবে এমন অ্যাপ্লিকেশন পছন্দ করুন:" #: standalone/drakfont:556 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "কোন ফন্ট ইনস্টল করার আগে, নিশ্চিত হোন যে সেগুলো আপনার সিস্টেমে ব্যবহার ও ইনস্টল " "করার অধিকার আপনার আছে।\n" "\n" "আপনি সাধারণ উপায়ে ফন্ট ইনস্টল করতে পারেন। খুব অল্প ক্ষেত্রে, ভুয়া ফন্ট আপনার এক্স(X) " "সার্ভারকে হ্যাং করে ফেলতে পারে।" #: standalone/drakfont:566 #, c-format msgid "Ghostscript" msgstr "ঘোস্টস্ক্রিপ্ট" #: standalone/drakfont:567 #, c-format msgid "StarOffice" msgstr "স্টারঅফিস" #: standalone/drakfont:568 #, c-format msgid "Abiword" msgstr "এবিওয়ার্ড" #: standalone/drakfont:569 #, c-format msgid "Generic Printers" msgstr "জেনেরিক প্রিন্টার" #: standalone/drakfont:585 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "ফন্ট ফাইল অথবা ডিরেক্টরি বেছে নিন এবং 'সংযুক্ত' এ ক্লিক করুন" #: standalone/drakfont:586 #, c-format msgid "File Selection" msgstr "ফাইল বাছাই" #: standalone/drakfont:590 #, c-format msgid "Fonts" msgstr "ফন্ট" # ####"আমদানি" #: standalone/drakfont:653 #, c-format msgid "Import fonts" msgstr "ফন্ট ইমপোর্ট করো" #: standalone/drakfont:658 #, c-format msgid "Install fonts" msgstr "ফন্ট ইনস্টল করো" #: standalone/drakfont:693 #, c-format msgid "click here if you are sure." msgstr "যদি আপনি নিশ্চিত থাকুন তবে এখানে ক্লিক করুন।" #: standalone/drakfont:695 #, c-format msgid "here if no." msgstr "যদি না হয় তবে এখানে।" #: standalone/drakfont:734 #, c-format msgid "Unselected All" msgstr "সব কিছু অনির্বাচিতকরণ" #: standalone/drakfont:737 #, c-format msgid "Selected All" msgstr "সব কিছু নির্বাচিত" #: standalone/drakfont:740 #, c-format msgid "Remove List" msgstr "লিস্ট মুছে ফেলো" #: standalone/drakfont:751 standalone/drakfont:770 #, c-format msgid "Importing fonts" msgstr "ফন্ট আমদানি হচ্ছে" #: standalone/drakfont:755 standalone/drakfont:775 #, c-format msgid "Initial tests" msgstr "শুরুর দিককার পরীক্ষা" #: standalone/drakfont:756 #, c-format msgid "Copy fonts on your system" msgstr "আপনার সিস্টেমে ফন্ট কপি করুন" #: standalone/drakfont:757 #, c-format msgid "Install & convert Fonts" msgstr "ফন্ট ইনস্টল কর এবং রুপান্তর করো" #: standalone/drakfont:758 #, c-format msgid "Post Install" msgstr "ইনস্টল পরবর্তী কাজ" #: standalone/drakfont:776 #, c-format msgid "Remove fonts on your system" msgstr "আপনার সিস্টেম থেকে ফন্ট মুছে ফেলুন" #: standalone/drakfont:777 #, c-format msgid "Post Uninstall" msgstr "আনইনস্টল পরবর্তী কাজ" #: standalone/drakgw:50 standalone/drakvpn:51 #, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "দুঃখিত, আমরা শুধু ২,৪ এবং উপরের কার্নালগুলি সাপোর্ট করি।" #: standalone/drakgw:75 #, c-format msgid "Internet Connection Sharing" msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি" #: standalone/drakgw:79 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "আপনি আপনার কম্পিউটারের ইন্টারনেট সংযুক্তি ভাগাভাগি করার জন্য কন্‌ফিগার প্রায় করে " "ফেলেছেন।\n" "এই বৈশিষ্ট্যের কারণে, আপনার লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো এই কম্পিউটারের " "ইন্টারনেট সংযুক্ত ব্যবহার করতে পারবে।\n" "\n" "পরবর্তী কোন কাজ করার আগে নিশ্চিত করুন যে drakconnect দিয়ে আপনার নেটওয়ার্ক/" "ইন্টারনেটে প্রবেশ কন্‌ফিগার করেছেন।\n" "\n" "নোট: স্থানীয় এরিয়া নেটওয়ার্ক (LAN) করার জন্য আপনার একটি নেটওয়ার্ক এডাপ্টর লাগবে।" #: standalone/drakgw:95 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "ইন্টারনেট সংযুক্তিতে ভাগাভাগি সংক্রান্ত সেটআপ ইতিমধ্যে হয়ে গেছে।\n" "এটা বর্তমানে সক্রিয় আছে।\n" "\n" "আপনি এখন কি করতে চান?" #: standalone/drakgw:99 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "ইন্টারনেট সংযুক্তিতে ভাগাভাগি সংক্রান্ত সেটআপ ইতিমধ্যে হয়ে গেছে।\n" "এটা আপাতত নিষ্ক্রিয় করা আছে।\n" "\n" "আপনি এখন কি করতে চান?" #: standalone/drakgw:105 #, fuzzy, c-format msgid "Reconfigure" msgstr "পুনরায় কন্‌ফিগার" #: standalone/drakgw:145 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "আপনার সিস্টেমে একটিমাত্র কন্‌ফিগার করা নেটওয়ার্ক এডাপ্টর আছে:\n" "\n" "%s\n" "\n" "আমি আপনার স্থানীয় এরিয়ার নেটওয়ার্ক সেই এডাপ্টরের সাথে করতে যাচ্ছি।" #: standalone/drakgw:156 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "আপনার স্থানীয় এরিয়া নেটওয়ার্কে কোন নেটওয়ার্ক এডাপ্টর যুক্ত হবে তা অনুগ্রহ করে পছন্দ " "করুন।" # ##msgstr "স্থানীয় নেটওয়ার্ক ঠিকানা" #: standalone/drakgw:177 #, fuzzy, c-format msgid "Local Area Network setings" msgstr "স্থানীয় নেটওয়ার্ক অ্যাড্রেস" #: standalone/drakgw:180 #, c-format msgid "Local IP adress" msgstr "" #: standalone/drakgw:182 #, c-format msgid "The internal domain name" msgstr "অন্তঃস্থ ডোমেইন নাম" #: standalone/drakgw:188 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "%s এর বর্তমান কন্‌ফিগে কার্যকরী ল্যান এড্রেস দ্বন্দ্ব পাওয়া গিয়েছিল!\n" #: standalone/drakgw:204 #, fuzzy, c-format msgid "Domain Name Server (DNS) configuration" msgstr "টার্মিনাল সার্ভার কনফিগারেশন" #: standalone/drakgw:208 #, c-format msgid "Use this gateway as domain name server" msgstr "" #: standalone/drakgw:209 #, c-format msgid "The DNS Server IP" msgstr "DNS সার্ভার আই-পি(IP)" #: standalone/drakgw:241 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "DHCP সার্ভার কন্‌ফিগারেশন।\n" "\n" "এখানে আপনি DHCP সার্ভার কন্‌ফিগার করার জন্য বিভিন্ন অপশন পছন্দ করতে পারেন।\n" "যদি কোন অপশন না বুঝতে পারেন, তাহলে যেমন আছে তেমনই রেখে দিন।" #: standalone/drakgw:248 #, fuzzy, c-format msgid "Use automatic configuration (DHCP)" msgstr "স্বয়ংক্রিয়ভাবে পুনরায় কন্‌ফিগার" #: standalone/drakgw:249 #, c-format msgid "The DHCP start range" msgstr "DHCP সীমার শুরু" #: standalone/drakgw:250 #, c-format msgid "The DHCP end range" msgstr "DHCP সীমার শেষ" #: standalone/drakgw:251 #, c-format msgid "The default lease (in seconds)" msgstr "ডিফল্ট লীজ(lease) (সেকেন্ডে)" #: standalone/drakgw:252 #, c-format msgid "The maximum lease (in seconds)" msgstr "সর্বোচ্চ লীজ(lease) (সেকেন্ডে)" #: standalone/drakgw:278 #, c-format msgid "Proxy caching server (SQUID)" msgstr "" #: standalone/drakgw:282 #, c-format msgid "Use this gateway as proxy caching server" msgstr "" #: standalone/drakgw:283 #, c-format msgid "Admin mail" msgstr "" #: standalone/drakgw:284 #, fuzzy, c-format msgid "Visible hostname" msgstr "দূরবর্তী হোস্টের নাম" #: standalone/drakgw:285 #, fuzzy, c-format msgid "Proxy port" msgstr "বৈশিষ্ট্য" #: standalone/drakgw:286 #, fuzzy, c-format msgid "Cache size (MB)" msgstr "ক্যাশ সাইজ" #: standalone/drakgw:311 #, fuzzy, c-format msgid "Broadcast printer information" msgstr "হার্ড ড্রাইভের তথ্য" #: standalone/drakgw:328 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি এখন সক্রিয়।" #: standalone/drakgw:334 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি এখন নিষ্ক্রিয়।" #: standalone/drakgw:340 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "সবকিছু কন্‌ফিগার করা হয়েছে।\n" "আপনি এখন আপনার স্থানীয় এরিয়া নেটওয়ার্কে অন্যান্য কম্পিউটারের সাথে ইন্টারনেট সংযুক্তি " "ভাগাভাগি করতে পারেন, স্বয়ংক্রিয়ভাবে নেটওয়ার্ক কন্‌ফিগারেশন (DHCP) এবং\n" " একটি স্বচ্ছ প্রক্সি ক্যাশ সার্ভার (SQUID) ব্যবহার করে।" #: standalone/drakgw:375 #, c-format msgid "Disabling servers..." msgstr "সার্ভার নিষ্ক্রিয়করণ..." #: standalone/drakgw:389 #, c-format msgid "Firewalling configuration detected!" msgstr "ফায়ারওয়াল কন্‌ফিগারেশনের সন্ধান পাওয়া গেছে!" #: standalone/drakgw:390 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "সাবধান! একটি বিদ্যমান ফায়ারওয়াল কন্‌ফিগারেশনের সন্ধান পাওয়া গেছে। আপনি " "ইনস্টলেশনের পর নিজেই কিছু ঠিক করে নিতে পারেন।" #: standalone/drakgw:398 #, c-format msgid "Configuring..." msgstr "কন্‌ফিগার হচ্ছে..." #: standalone/drakgw:399 #, c-format msgid "Configuring firewall..." msgstr "" #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2005 Mandriva.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" " drakhelp 0.১\n" "স্বত্বাধিকারী (C) ম্যান্ড্রিব সফ্‌ট ২০০৩-২০০৪ ।\n" "এটি একটি ফ্রি সফ্‌টওয়্যার এবং জি-এন-ইউ জি-পি-এল এর শর্তের অধীনে পুনরায় বিতরণ করা " "যেতে পারে।\n" "\n" "ব্যবহার: \n" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr " --help - এই সাহায্য দেখাও \n" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" " --id - সাহায্যকারী এইচটিএমএল (html) পেজ লোড কর যা id_label " "এর সাথে সম্পর্ক স্থাপন করে\n" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr " --doc - অন্য ওয়েব পেজে সংযুক্তি\n" # সাম #: standalone/drakhelp:36 #, c-format msgid "Mandriva Linux Help Center" msgstr "Mandriva Linux সাহায্যকেন্দ্র" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "%s দেখানো যাবে না \n" "এই ধরণের কোন সহায়ক এন্ট্রি নেই\n" #: standalone/drakhosts:108 #, c-format msgid "Please %s information" msgstr "" #: standalone/drakhosts:110 #, c-format msgid "IP address:" msgstr "" #: standalone/drakhosts:111 #, c-format msgid "Host name:" msgstr "" #: standalone/drakhosts:112 #, c-format msgid "Host Aliases:" msgstr "" #: standalone/drakhosts:118 #, c-format msgid "Please enter a valid IP address." msgstr "" #: standalone/drakhosts:125 #, c-format msgid "Same IP is already in %s file." msgstr "" #: standalone/drakhosts:194 #, c-format msgid "Host Aliases" msgstr "" #: standalone/drakhosts:237 #, c-format msgid "DrakHOSTS manage hosts definitions" msgstr "" #: standalone/drakhosts:246 #, c-format msgid "Failed to add host." msgstr "" #: standalone/drakhosts:253 #, c-format msgid "Failed to Modify host." msgstr "" #: standalone/drakhosts:260 #, c-format msgid "Failed to remove host." msgstr "" #: standalone/draknfs:43 #, c-format msgid "map root user as anonymous" msgstr "" #: standalone/draknfs:44 #, c-format msgid "map all users to anonymous user" msgstr "" #: standalone/draknfs:45 #, c-format msgid "allow real remote user access" msgstr "" #: standalone/draknfs:46 #, c-format msgid "allow real remote root access" msgstr "" #: standalone/draknfs:85 #, c-format msgid "NFS server" msgstr "" #: standalone/draknfs:85 #, c-format msgid "Restarting/Reloading NFS server..." msgstr "" #: standalone/draknfs:86 #, c-format msgid "Error Restarting/Reloading NFS server" msgstr "" #: standalone/draknfs:102 #, c-format msgid "Directory Selection" msgstr "" #: standalone/draknfs:107 #, c-format msgid "Should be a directory." msgstr "" #: standalone/draknfs:138 #, c-format msgid "" "NFS clients may be specified in a number of " "ways:\n" "\n" "\n" "single host: a host either by an " "abbreviated name recognized be the resolver, fully qualified domain name, or " "an IP address\n" "\n" "\n" "netgroups: NIS netgroups may be given " "as @group.\n" "\n" "\n" "wildcards: machine names may contain " "the wildcard characters * and ?. For instance: *.cs.foo.edu matches all " "hosts in the domain cs.foo.edu.\n" "\n" "\n" "IP networks: you can also export " "directories to all hosts on an IP (sub-)network simultaneously. for example, " "either `/255.255.252.0' or `/22' appended to the network base address " "result.\n" msgstr "" #: standalone/draknfs:153 #, c-format msgid "" "User ID options\n" "\n" "\n" "root_squash: map requests from uid/" "gid 0 to the anonymous uid/gid.\n" "\n" "\n" "no_root_squash: turn off root " "squashing. This option is mainly useful for diskless clients.\n" "\n" "\n" "all_squash: map all uids and gids to " "the anonymous user. Useful for NFS-exported public FTP directories, news " "spool directories, etc. The opposite option is no_all_squash, which is the " "default setting.\n" "\n" "\n" "anonuid and anongid: explicitly set " "the uid and gid of the anonymous account.\n" msgstr "" #: standalone/draknfs:169 #, c-format msgid "Synchronous access:" msgstr "" #: standalone/draknfs:170 #, c-format msgid "Secured Connection:" msgstr "" #: standalone/draknfs:171 #, c-format msgid "Read-Only share:" msgstr "" #: standalone/draknfs:173 #, c-format msgid "Advanced Options" msgstr "" #: standalone/draknfs:174 #, c-format msgid "" "%s: this option requires that " "requests originate on an internet port less than IPPORT_RESERVED (1024). " "This option is on by default." msgstr "" #: standalone/draknfs:175 #, c-format msgid "" "%s: allow either only read or both " "read and write requests on this NFS volume. The default is to disallow any " "request which changes the filesystem. This can also be made explicit by " "using this option." msgstr "" #: standalone/draknfs:176 #, c-format msgid "" "%s: disallows the NFS server to " "violate the NFS protocol and to reply to requests before any changes made by " "these requests have been committed to stable storage (e.g. disc drive)." msgstr "" #: standalone/draknfs:387 #, c-format msgid "Help Adcanced options" msgstr "" #: standalone/draknfs:399 #, c-format msgid "NFS directory" msgstr "" #: standalone/draknfs:401 #, c-format msgid "Directory:" msgstr "" #: standalone/draknfs:404 #, c-format msgid "Host access" msgstr "" #: standalone/draknfs:406 #, c-format msgid "Access:" msgstr "" #: standalone/draknfs:406 #, c-format msgid "Hosts Access" msgstr "" #: standalone/draknfs:409 #, c-format msgid "User ID Mapping" msgstr "" #: standalone/draknfs:411 #, c-format msgid "User ID:" msgstr "" #: standalone/draknfs:411 #, c-format msgid "Help User ID" msgstr "" #: standalone/draknfs:412 #, c-format msgid "Anonymous user ID:" msgstr "" #: standalone/draknfs:413 #, c-format msgid "Anonymous Group ID:" msgstr "" #: standalone/draknfs:460 standalone/draknfs:552 #, c-format msgid "Please enter a directory to share." msgstr "" #: standalone/draknfs:462 #, c-format msgid "You must specify hosts access." msgstr "" #: standalone/draknfs:540 #, c-format msgid "Share Directory" msgstr "" #: standalone/draknfs:540 #, c-format msgid "Hosts Wildcard" msgstr "" #: standalone/draknfs:540 #, c-format msgid "General Options" msgstr "" #: standalone/draknfs:540 #, c-format msgid "Custom Options" msgstr "" #: standalone/draknfs:559 #, c-format msgid "Please use the modify button to set right access." msgstr "" #: standalone/draknfs:614 #, c-format msgid "DrakNFS manage NFS shares" msgstr "" #: standalone/draknfs:623 #, c-format msgid "Failed to add NFS share." msgstr "" #: standalone/draknfs:630 #, c-format msgid "Failed to Modify NFS share." msgstr "" #: standalone/draknfs:637 #, c-format msgid "Failed to remove an NFS share." msgstr "" #: standalone/drakperm:21 #, c-format msgid "System settings" msgstr "সিস্টেম সেটিংস" #: standalone/drakperm:22 #, c-format msgid "Custom settings" msgstr "বিবিধ সেটিংস" #: standalone/drakperm:23 #, c-format msgid "Custom & system settings" msgstr "বিবিধ এবং সিস্টেম সেটিংস" # ##এডিটেবল -- Fix me #: standalone/drakperm:43 #, c-format msgid "Editable" msgstr "সম্পাদনাযোগ্য" #: standalone/drakperm:48 standalone/drakperm:323 #, c-format msgid "Path" msgstr "পাথ" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "ব্যবহারকারী" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "Group" msgstr "গ্রুপ" #: standalone/drakperm:48 standalone/drakperm:335 #, c-format msgid "Permissions" msgstr "অনুমতি" #: standalone/drakperm:57 #, c-format msgid "Add a new rule" msgstr "" #: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124 #, c-format msgid "Edit current rule" msgstr "বর্তমান নীতি সম্পাদনা" #: standalone/drakperm:106 #, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "এখানে আপনি অনুমতি, ব্যবহারকারী ও গ্রুপ নির্দিষ্ট করার জন্য ফাইলগুলো দেখতে পারেন।\n" "আপনি আপনার নিজস্ব নীতিগুলোও সম্পাদিত করতে পারেন যা ডিফল্ট নীতিগুলোকে পরিবর্তন করবে।" #: standalone/drakperm:109 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" "বর্তমান নিরাপত্তা লেভেল হচ্ছে %s।\n" "অনুমতি নির্বাচন করুন দেখতে/সম্পাদন করতে" #: standalone/drakperm:120 #, c-format msgid "Up" msgstr "উপরে" #: standalone/drakperm:120 #, c-format msgid "Move selected rule up one level" msgstr "নির্বাচিত নীতি এক লেভেল উপরে সরাও" #: standalone/drakperm:121 #, c-format msgid "Down" msgstr "নিচে" #: standalone/drakperm:121 #, c-format msgid "Move selected rule down one level" msgstr "নির্বাচিত নীতি এক লেভেল উপরে সরাও" #: standalone/drakperm:122 #, c-format msgid "Add a rule" msgstr "নীতি যোগ করো" #: standalone/drakperm:122 #, c-format msgid "Add a new rule at the end" msgstr "সবশেষে একটি নতুন নীতি যোগ করো" #: standalone/drakperm:123 #, c-format msgid "Delete selected rule" msgstr "নির্বাচিত নীতি বাদ দাও" # ##এডিট #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:124 standalone/drakups:302 standalone/drakups:362 #: standalone/drakups:382 standalone/drakvpn:319 standalone/drakvpn:680 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "সম্পাদন" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "ব্রাউজ" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "ব্যবহারকারী" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "গ্রুপ" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "অন্যান্য" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "পড়ো" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "\"%s\" ফাইলটি পড়তে সক্ষম" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "লেখো" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "\"%s\" ফাইলটি লিখতে সক্ষম" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "সম্পাদন করো" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "\"%s\" ফাইলটি সম্পাদন করতে সক্ষম" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "স্টিকি-বিট" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "ডিরেক্টরির জন্য ব্যবহৃত:\n" " এই ডিরেক্টরি বা এই ডিরেক্টরিতে থাকা ফাইলগুলোর মালিক (owner) শুধুমাত্র তা মুছে " "ফেলতে পারে" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "সেট-ইউআইডি(UID)" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "সম্পাদন করার জন্য মালিকানা(owner) আইডি(ID) ব্যবহার করুন" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "সেট-জিআইডি(GID)" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "সম্পাদন করার জন্য গ্রুপ আইডি(ID) ব্যবহার করুন" #: standalone/drakperm:292 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "ব্যবহারকারী :" #: standalone/drakperm:294 #, c-format msgid "Group:" msgstr "গ্রুপ :" #: standalone/drakperm:298 #, c-format msgid "Current user" msgstr "বর্তমান ব্যবহারকারী" #: standalone/drakperm:299 #, c-format msgid "When checked, owner and group will not be changed" msgstr "যখন পরীক্ষা করা হবে, তখন মালিকানা এবং গ্রুপ পরিবর্তিত হবে না" #: standalone/drakperm:309 #, c-format msgid "Path selection" msgstr "পাথ নির্বাচন" #: standalone/drakperm:329 #, c-format msgid "Property" msgstr "বৈশিষ্ট্য" #: standalone/drakroam:41 #, c-format msgid "" "You do not have any wireless interface.\n" "Run the \"%s\" assistant from the Mandriva Linux Control Center" msgstr "" #: standalone/drakroam:141 #, c-format msgid "ESSID" msgstr "" # ##বাতিল #: standalone/drakroam:142 standalone/drakvpn:1129 #, c-format msgid "Mode" msgstr "মোড" #: standalone/drakroam:143 standalone/harddrake2:97 #, c-format msgid "Channel" msgstr "চ্যানেল" #: standalone/drakroam:145 #, c-format msgid "Key" msgstr "" #: standalone/drakroam:161 #, c-format msgid "Network:" msgstr "নেটওয়ার্ক:" #: standalone/drakroam:162 #, c-format msgid "IP:" msgstr "" #: standalone/drakroam:164 #, c-format msgid "Mode:" msgstr "মোড:" #: standalone/drakroam:165 #, c-format msgid "Encryption:" msgstr "এনক্রিপশন:" #: standalone/drakroam:166 #, c-format msgid "Signal:" msgstr "" #: standalone/drakroam:180 #, c-format msgid "Roaming" msgstr "" #: standalone/drakroam:183 standalone/drakroam:266 #, c-format msgid "Roaming: %s" msgstr "" #: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1047 #: standalone/drakvpn:1063 standalone/drakvpn:1076 #, c-format msgid "off" msgstr "বন্ধ" #: standalone/drakroam:190 #, c-format msgid "Scan interval (sec): " msgstr "" #: standalone/drakroam:193 #, c-format msgid "Set" msgstr "" #: standalone/drakroam:198 #, c-format msgid "Known Networks (Drag up/down or edit)" msgstr "" #: standalone/drakroam:206 #, c-format msgid "Connect" msgstr "সংযোগ স্থাপন করো" #: standalone/drakroam:214 #, c-format msgid "Available Networks" msgstr "" #: standalone/drakroam:229 #, c-format msgid "Rescan" msgstr "" #: standalone/drakroam:233 #, c-format msgid "Status" msgstr "স্ট্যাটাস" #: standalone/drakroam:240 #, c-format msgid "Disconnect" msgstr "সংযোগ বিচ্ছিন্ন করো" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakroam:241 standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "রিফ্রেশ" #: standalone/drakroam:265 standalone/drakvpn:1047 standalone/drakvpn:1063 #: standalone/drakvpn:1076 #, c-format msgid "on" msgstr "চালু" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "সব" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "স্থানীয়" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "অগ্রাহ্য" # সাম :s #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "এখানে, আপনি আপনার মেশিনের নিরাপত্তা স্তর এবং অ্যাডমিনস্ট্রেটর সেটআপ করতে পারেন।\n" "\n" "\n" "যদি 'নিরাপত্তা সতর্কতা সংকেত' অপশন সেট করা থাকে,\n" "' নিরাপত্তা অ্যাডমিনিস্ট্রেটর' সতর্কতাগুলো পেয়ে " "থাকেন। অ্যাডমিনিস্ট্রেটর একজন ব্যবহারকারীর নাম অথবা ই-মেইল হতে পারে।\n" "\n" "\n" "'নিরাপত্তা স্তর' মেনু আপনাকে msec থেকে সরবরাহকৃত " "এবং কনফিগার করা ছয়টি স্তরের\n" "মধ্যে যেকোন একটি বেছে নেয়ার সুযোগ দেবে। এই স্তরগুলো 'নিম্নমানের'নিরাপত্তা\n" "ও ব্যবহারের স্বাচ্ছন্দ্য থেকে, স্পর্শকাতর সার্ভার অ্যাপ্লিকেশনের জন্য প্রযোজ্য 'প্যারানয়েডকনফিগারেশন পর্যন্ত বিস্তৃত:\n" "\n" "\n" "নিম্নমান: এটি একটি সম্পূর্ণ অনিরাপদ,\n" "কিন্তু সহজে ব্যবহারযোগ্য নিরাপত্তা স্তর। নেটওয়ার্কে যুক্ত নয় এবং সবাই প্রবেশ করতে পারে " "না,\n" "শুধুমাত্র এমন মেশিনে এ স্তর ব্যবহার করা উচিত।\n" "\n" "\n" "আদর্শ: যেসব কম্পিউটার ক্লায়েন্ট হিসেবে\n" "ইন্টারনেটে সংযুক্ত হয়, সেসব মেশিনের জন্য এটি আদর্শ\n" "নিরাপত্তা স্তর।\n" "\n" "\n" "উচ্চমান: এখানে অনেক সীমাবদ্ধতা প্রয়োগ " "করা হয় এবং\n" "প্রতিরাতে স্বয়ংক্রিয় পরীক্ষা চালু করা হয়।\n" "\n" "\n" "উচ্চতর: এ স্তরে নিরাপত্তা অনেক বেশি এবং\n" "সিস্টেমটি সার্ভার হিসেবে ব্যবহারযোগ্য, যা কিনা অন্যান্য ক্লায়েন্ট থেকে সংযুক্তি গ্রহন " "করে যদি আপনার\n" "মেশিনটি ইন্টারনেটে শুধুমাত্র ক্লায়েন্ট হিসেবে সংযুক্ত থাকে তাহলে এরচেয়ে অল্পমানের স্তর " "ব্যবহার করা উচিত।\n" "\n" "\n" "প্যারানয়েড: এটিও পূর্বের স্তরের মতই,\n" "কিন্তু সিস্টেম পুরোপুরি সীমাবন্ধ এবং সম্ভাব্য সর্বোচ্চ\n" "নিরাপত্তা প্রয়োগ হয়" #: standalone/draksec:154 standalone/harddrake2:208 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "ফিল্ডগুলোর বর্ণনা:\n" "\n" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "(ডিফল্ট মান: %s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "নিরাপত্তা লেভেল:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "নিরাপত্ত ব্যবস্থাপক:" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "বেসিক অপশন" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "নেটওয়ার্ক অপশন" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "সিস্টেম অপশন" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "পুনরাবৃত্তি পরীক্ষা" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "অনুগ্রহ করে অপেক্ষা করুন, নিরাপত্তা লেভেল সেট করা হচ্ছে..." #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "অনুগ্রহ করে অপেক্ষা করুন, নিরাপত্তা অপশনগুলো সেট করা হচ্ছে..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "কোন সাউন্ড কার্ড সনাক্ত করা যায়নি!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" "আপনার মেশিনে কোন সাউন্ডকার্ড পাওয়া যায়নি। অনুগ্রহ করে ভালভাবে দেখুন একটি লিনাক্স-" "সমর্থিত সাউন্ডকার্ড সঠিকভাবে লাগানো আছে।\n" " \n" "\n" "আপনি আমাদের হার্ডওয়ার ডাটাবেজে ঘুরে আসতে পারেন:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" #: standalone/draksound:57 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "নোট: যদি আপনার ISA PnP সাউন্ডকার্ড থাকে, তাহলে আপনাকে alsaconf বা sndconfig " "প্রোগ্রাম ব্হব্যবহার করতে হবে। কনসোলে শুধুমাত্র \"alsaconf\" বা \"sndconfig\" " "ব্যবহার করুন।" #: standalone/draksplash:15 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "কন্‌ফিগারেশন সম্পূর্ণ করার জন্য 'ImageMagic' প্যাকেজটি প্রয়োজন।\n" "'ImageMagic' ইনস্টল করতে \"ঠিক আছে\" অথবা পরিত্যাগ করতে \"বাতিল\" ক্লিক করুন" #: standalone/draksplash:34 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "বর্ণসংখ্যায়\n" "টেক্সট বাক্সের X অক্ষ" #: standalone/draksplash:35 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "বর্ণসংখ্যায়\n" "টেক্সট বাক্সের y অক্ষ" #: standalone/draksplash:36 #, c-format msgid "text width" msgstr "টেক্সটের প্রস্থতা" #: standalone/draksplash:37 #, c-format msgid "text box height" msgstr "টেক্সট্ বক্সের উচ্চতা" #: standalone/draksplash:38 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "এটার উপরের বাম কোণা থেকে\n" "প্রোগ্রেস বারের x অক্ষ" #: standalone/draksplash:39 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "এটার উপরের বাম কোণা থেকে\n" "প্রোগ্রেস বারের y অক্ষ" #: standalone/draksplash:40 #, c-format msgid "the width of the progress bar" msgstr "প্রোগ্রেস বারের প্রস্থ" #: standalone/draksplash:41 #, c-format msgid "the height of the progress bar" msgstr "প্রোগ্রেস বারের উচ্চতা" #: standalone/draksplash:58 standalone/draksplash:63 #, c-format msgid "Choose progress bar color" msgstr "" #: standalone/draksplash:59 standalone/draksplash:64 #, c-format msgid "Choose picture" msgstr "" #: standalone/draksplash:60 #, c-format msgid "Silent bootsplash" msgstr "" #: standalone/draksplash:65 #, c-format msgid "Verbose bootsplash" msgstr "" #: standalone/draksplash:67 #, c-format msgid "Display logo on Console" msgstr "কনসোলে লোগো দেখাও" #: standalone/draksplash:70 #, c-format msgid "Console bootsplash" msgstr "" #: standalone/draksplash:76 #, c-format msgid "Theme name" msgstr "থীমের নাম" #: standalone/draksplash:79 #, c-format msgid "final resolution" msgstr "ফাইনাল রেজুলেশন" #: standalone/draksplash:84 #, c-format msgid "Save theme" msgstr "থীম সংরক্ষণ করো" #: standalone/draksplash:145 #, c-format msgid "saving Bootsplash theme..." msgstr "bootsplash থীম সেভ করা হচ্ছে..." #: standalone/draksplash:159 #, c-format msgid "Unable to load image file %s" msgstr "" #: standalone/draksplash:169 #, c-format msgid "choose image" msgstr "ছবি (image) পছন্দ করুন" #: standalone/draksplash:186 #, c-format msgid "ProgressBar color selection" msgstr "প্রোগ্রেসবারের রং নির্বাচন" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "সিরিয়াল পোর্ট বা ইউএসবি তারের মাধ্যমে সংযুক্ত" #: standalone/drakups:80 #, c-format msgid "Add an UPS device" msgstr "একটু UPS ডিভাইস যোগ করো" #: standalone/drakups:83 #, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "UPS কনফিগারেশন ইউটিলিটিতে স্বাগতম।\n" "\n" "এখানে আপনি আপনার সিস্টেমের জন্য একটি নতুন UPS যোগ করতে পারবেন।\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" "আমরা একটি UPS ডিভাইস যোগ করতে যাচ্ছি।\n" "\n" "আপনি কি এই মেশিনের সাথে সংযুক্ত UPS ডিভাইস সয়ংক্রিয় সনাক্ত করতে চান অথবা?" #: standalone/drakups:93 #, c-format msgid "Autodetection" msgstr "সয়ংক্রিয় সনাক্ত" #: standalone/drakups:101 standalone/harddrake2:245 #, c-format msgid "Detection in progress" msgstr "সনাক্তকরনে উন্নতি হচ্ছে" #: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "স্বাগতম" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "উইজার্ড সফলভাবে নিম্নলিখিত ইউ-পি-এস যন্ত্রগুলো সংযোজিত করেছে:" #: standalone/drakups:123 #, c-format msgid "No new UPS devices was found" msgstr "নতুন কোন ইউ-পি-এস যন্ত্র পাওয়া যায়" #: standalone/drakups:128 standalone/drakups:140 #, c-format msgid "UPS driver configuration" msgstr "ইউ-পি-এস ড্রাইভার কন্‌ফিগারেশন" #: standalone/drakups:128 #, c-format msgid "Please select your UPS model." msgstr "অনুগ্রহ করে আপনার ইউ-পি-এস মডেল নির্বাচন করুন।" #: standalone/drakups:129 #, c-format msgid "Manufacturer / Model:" msgstr "প্রস্তুতকারক / মডেল:" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" "আমরা \"%s\" থেকে \"%s\" ইউ-পি-এস'টি কন্‌ফিগার করছি।\n" "অনুগ্রহ করে এটার নাম, এটার ড্রাইভার এবং এটার পোর্ট পূরণ করুন।" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "নাম:" #: standalone/drakups:145 #, c-format msgid "The name of your ups" msgstr "আপনার ইউ-পি-এস এর নাম" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "আপনার ইউ-পি-এস কে পরিচালিত ড্রাইভার" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "পোর্ট:" #: standalone/drakups:149 #, c-format msgid "The port on which is connected your ups" msgstr "যে পোর্টে আপনার ইউ-পি-এস সংযুক্ত" #: standalone/drakups:159 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "উইজার্ড সফলভাবে নতুন \"%s\" ইউ-পি-এস যন্ত্রটি কন্‌ফিগার করেছে।" #: standalone/drakups:250 #, c-format msgid "UPS devices" msgstr "ইউ-পি-এস যন্ত্র" #: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 #: standalone/harddrake2:85 standalone/harddrake2:111 #: standalone/harddrake2:118 #, c-format msgid "Name" msgstr "নাম" #: standalone/drakups:269 #, c-format msgid "UPS users" msgstr "ইউ-পি-এস ব্যবহারকারী" #: standalone/drakups:285 #, c-format msgid "Access Control Lists" msgstr "প্রবেশ পরিচালনার তালিকা" #: standalone/drakups:286 #, c-format msgid "IP mask" msgstr "আই-পি মাস্ক" #: standalone/drakups:298 #, c-format msgid "Rules" msgstr "নীতিমালা" #: standalone/drakups:299 #, c-format msgid "Action" msgstr "কাজ" #: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82 #, c-format msgid "Level" msgstr "লেভেল" #: standalone/drakups:299 #, c-format msgid "ACL name" msgstr "এ-সি-এল (ACL) নাম" #: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342 #, c-format msgid "DrakUPS" msgstr "DrakUPS" #: standalone/drakups:339 #, c-format msgid "Welcome to the UPS configuration tools" msgstr "ইউ-পি-এস কন্‌ফিগারেশন টুলে স্বাগতম" #: standalone/drakvpn:73 #, c-format msgid "DrakVPN" msgstr "DrakVPN" #: standalone/drakvpn:95 #, c-format msgid "The VPN connection is enabled." msgstr "VPN সংযুক্তি সক্রিয়।" #: standalone/drakvpn:96 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "VPN সংযুক্তির সেটআপ ইতিমধ্যে হয়ে গেছে।\n" "\n" "এটা এখন সক্রিয় অবস্থায় আছে।\n" "\n" "আপনি কি করতে পছন্দ করছেন?" #: standalone/drakvpn:101 #, c-format msgid "disable" msgstr "নিষ্ক্রিয়" #: standalone/drakvpn:101 standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "পুনরায় কন্‌ফিগার" #: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362 #: standalone/drakvpn:721 #, c-format msgid "dismiss" msgstr "বাদ" #: standalone/drakvpn:105 #, c-format msgid "Disabling VPN..." msgstr "VPN নিষ্ক্রিয় হচ্ছে..." #: standalone/drakvpn:114 #, c-format msgid "The VPN connection is now disabled." msgstr "VPN সংযুক্তি এখন নিষ্ক্রিয়।" #: standalone/drakvpn:121 #, c-format msgid "VPN connection currently disabled" msgstr "VPN সংযুক্তি বর্তমানে নিষ্ক্রিয়" #: standalone/drakvpn:122 #, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "VPN সংযুক্তির সেটআপ ইতিমধ্যে হয়ে গেছে।\n" "\n" "এটা এখন নিষ্ক্রিয় অবস্থায় আছে।\n" "\n" "আপনি কি করতে পছন্দ করছেন?" #: standalone/drakvpn:127 #, c-format msgid "enable" msgstr "সক্রিয়" #: standalone/drakvpn:135 #, c-format msgid "Enabling VPN..." msgstr "VPN সক্রিয় হচ্ছে..." #: standalone/drakvpn:141 #, c-format msgid "The VPN connection is now enabled." msgstr "VPN সংযোগ এখন সক্রিয়।" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "সাধারণ VPN সেটআপ।" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" "আপনি আপনার কম্পিউটারের VPN সংযুক্তির কন্‌ফিগার প্রায় করে ফেলেছেন।\n" "\n" "এই বৈশিষ্ট্যের কারণে, আপনার ব্যক্তিগত লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো\n" "এবং অন্যান্য দূরবর্তী ব্যক্তিগত নেটওয়ার্কে থাকা কম্পিউটারগুলো, তাদের ফায়ারওয়ালের\n" "মাধ্যমে, ইন্টারনেটে, নিরাপত্তা সহযোগে, সেগুলোর রিসোর্স ভাগাভাগি করতে পারেন। \n" "\n" "ইন্টারনেটে যোগাযোগ এনক্রিপ্ট হয়ে হয়। স্থানীয় এবং দূরবর্তী কম্পিউটারগুলো\n" "দেখুন যদি সেগুলো একই নেটওয়ার্কে থাকে।\n" "\n" "অন্য উপায় না দেখে নিশ্চিত হোন যে drakconnect ব্যবহার করে আপনার\n" "নেটওয়ার্ক ও ইন্টারনেট ব্যবহার কন্‌ফিগার করা হয়েছে।" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" "VPN সংযুক্তি।\n" "\n" "এই প্রোগ্রামটি নিম্নলিখিত প্রোজেক্টের উপর নির্ভরশীল:\n" " - ফ্রিসুয়ান: \t\t\thttp://www.freeswan.org/\n" " - সুপার-ফ্রিসুয়ান: \t\thttp://www.freeswan.ca/\n" " - ipsec-টুল্‌স: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - তথ্য এবং ম্যান পেজগুলো %s প্যাকেজের সাথে আসে\n" "\n" "অন্যান্য ক্ষেত্রে যাওয়ার আগে অনুগ্রহ করে অন্ততপক্ষে\n" " ipsec-howto নথিগুলো পড়ুন।" #: standalone/drakvpn:196 #, c-format msgid "Kernel module." msgstr "কার্নেল মডিউল।" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" "কার্ণেলের ipsec সহায়ক হওয়া প্রয়োজন।\n" "\n" "আপনি কার্ণেলের %s সংস্করণ চালাচ্ছেন।\n" "\n" "এই কার্ণেলের '%s' সহায়তা আছে।" #: standalone/drakvpn:264 #, c-format msgid "Problems installing package %s" msgstr "%s প্যাকেজ ইনস্টলে সমস্যা" #: standalone/drakvpn:278 #, c-format msgid "Security Policies" msgstr "নিরাপত্তা নীতি" #: standalone/drakvpn:278 #, c-format msgid "IKE daemon racoon" msgstr "IKE ডেমন্‌ racoon" #: standalone/drakvpn:281 standalone/drakvpn:292 #, c-format msgid "Configuration file" msgstr "কন্‌ফিগারেশন ফাইল" #: standalone/drakvpn:282 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" "কন্‌ফিগারেশনের ধাপ !\n" "\n" "আপনাকে নিরাপত্তা নীতি বলে দিতে হবে এবং তারপর \n" "স্বয়ংক্রিয় কী পরিবর্তন (IKE) ডেমন্‌ কন্‌ফিগার করতে হবে। \n" "আমরা যে KAME IKE ডেমন্‌ ব্যবহার করছি তাকে 'racoon' বলা হয়।\n" "\n" "আপনি কি কন্‌ফিগার করতে পছন্দ করছেন?\n" #: standalone/drakvpn:293 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" "পরবর্তীতে, আমরা %s ফাইলটি কন্‌ফিগার করব।\n" "\n" "\n" "শুধুমাত্র পরবর্তী'তে ক্লিক করুন।\n" #: standalone/drakvpn:311 standalone/drakvpn:671 #, c-format msgid "%s entries" msgstr "%s এন্ট্রি" #: standalone/drakvpn:312 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" "%s ফাইলের বিষয়বস্তুগুলো\n" "বিভিন্ন সেক্‌শনে বিভক্ত থাকে।\n" "\n" "আপনি এখন করতে পারেন :\n" "\n" " - প্রদর্শন, যোগ, সম্পাদনা, অথবা সেকশন মুছে ফেলতে পারেন, তখন\n" " - পরিবর্তগুলো নিবদ্ধ করুন\n" "\n" "আপনি কি করতে পছন্দ করছেন?\n" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "প্রদর্শন করো" #: standalone/drakvpn:319 standalone/drakvpn:680 #, c-format msgid "Commit" msgstr "নিবদ্ধ করো" #: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695 #: standalone/drakvpn:699 #, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "কন্‌ফিগারেশন প্রদর্শন করো" #: standalone/drakvpn:338 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" "%s ফাইলটি বিদ্যমান নেই।\n" "\n" "এটা অবশ্যই একটি নতুন কন্‌ফিগারেশন হবে।\n" "\n" "আপনাকে পূর্ব অবস্থানে যেতে হবে এবং 'যোগ করো' পছন্দ করুন।\n" #: standalone/drakvpn:354 #, c-format msgid "ipsec.conf entries" msgstr "ipsec.conf এন্ট্রি" #: standalone/drakvpn:355 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" "%s ফাইলের বিভিন্ন সেক্‌শন আছে।\n" "\n" "এখানে এটার ভেতরের সেক্‌শনে আছে :\t'কন্‌ফিগ সেটআপ' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'সাধারণ১'\n" "\t\t\t\t\t'সাধারণ২' \n" "\n" "আপনি এখন যেকোন একটি সেক্‌শন যোগ করতে পারেন।\n" "\n" "আপনি যে সেক্‌শনটি পছন্দ করুন সেটা বেছে নিন।\n" #: standalone/drakvpn:362 #, c-format msgid "config setup" msgstr "কন্‌ফিগ সেটআপ" #: standalone/drakvpn:362 #, c-format msgid "conn %default" msgstr "conn %default" #: standalone/drakvpn:362 #, c-format msgid "normal conn" msgstr "সাধারণ conn" #: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496 #, c-format msgid "Exists!" msgstr "বিদ্যমান !" #: standalone/drakvpn:369 standalone/drakvpn:410 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" "এই নামের একটি সেক্‌শন ইতিমধ্যেই বিদ্যমান আছে।\n" "এই সেক্‌শনর নামটি অদ্বিতীয় হতে হবে।\n" "\n" "আপনাকে পূর্ব অবস্থানে ফিরে যেতে হবে এবং অন্য সেক্‌শন যোগ করতে\n" "হবে অথবা এটার নাম পরিবর্তন করতে হবে।\n" #: standalone/drakvpn:386 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" "এটি আপনার %s ফাইলের উপরে\n" "থাকতে হবে।\n" "\n" "নিশ্চিত হোন যে অন্যান্য সব সেক্‌শন এই কন্‌ফিগ সেটআপ\n" "মেনে নেবে।\n" "\n" "চালিয়ে যাও অথবা পূর্ববর্তী পছন্দ করুন যখন আপনার কাজ হয়ে যাবে।\n" #: standalone/drakvpn:391 #, c-format msgid "interfaces" msgstr "ইন্টারফেস" #: standalone/drakvpn:392 #, c-format msgid "klipsdebug" msgstr "klipsডিবাগ" #: standalone/drakvpn:393 #, c-format msgid "plutodebug" msgstr "প্লুটোডিবাগ" #: standalone/drakvpn:394 #, c-format msgid "plutoload" msgstr "প্লুটোচালু" #: standalone/drakvpn:395 #, c-format msgid "plutostart" msgstr "প্লুটোশুরু" #: standalone/drakvpn:396 #, c-format msgid "uniqueids" msgstr "অদ্বিতীয়আইডি" #: standalone/drakvpn:430 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" "একবার কন্‌ফিগ সেটআপ করার পর\n" "এটা হচ্ছে প্রথম সেক্‌শন।\n" "\n" "এখানে আপনি ডিফল্ট সেটিংস নির্দিষ্ট করে দিতে পারেন। \n" "অন্য সব সেক্‌শন এটা মেনে চলবে।\n" "বামের এই সেটিংসটি ঐচ্ছিক। যদি এগুলোকে সবার জন্য নির্দিষ্ট\n" "করে দিতে না চান, তাহলে প্রত্যেক সেক্‌শন আলাদা করে নির্দিষ্ট করে\n" "দিতে পারেন।\n" #: standalone/drakvpn:437 #, c-format msgid "PFS" msgstr "পি-এফ-এস" #: standalone/drakvpn:438 #, c-format msgid "keyingtries" msgstr "keyingtries" #: standalone/drakvpn:439 #, c-format msgid "compress" msgstr "সংক্ষিপ্ত" #: standalone/drakvpn:440 #, c-format msgid "disablearrivalcheck" msgstr "disablearrivalcheck" #: standalone/drakvpn:441 standalone/drakvpn:480 #, c-format msgid "left" msgstr "বাম" #: standalone/drakvpn:442 standalone/drakvpn:481 #, c-format msgid "leftcert" msgstr "বামসার্ট" #: standalone/drakvpn:443 standalone/drakvpn:482 #, c-format msgid "leftrsasigkey" msgstr "বামrsasigkey" #: standalone/drakvpn:444 standalone/drakvpn:483 #, c-format msgid "leftsubnet" msgstr "বামসাবনেট" #: standalone/drakvpn:445 standalone/drakvpn:484 #, c-format msgid "leftnexthop" msgstr "বামnexthop" #: standalone/drakvpn:474 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" "আপনার %s ফাইলের কয়েকটি সেক্‌শন, অথবা সংযুক্তি আছে।\n" "\n" "আপনি এখন একটি নতুন সেক্‌শন যোগ করতে পারেন।\n" "যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:477 #, c-format msgid "section name" msgstr "অংশের নাম" #: standalone/drakvpn:478 #, c-format msgid "authby" msgstr "অনুমোদিত" #: standalone/drakvpn:479 #, c-format msgid "auto" msgstr "স্বয়ংক্রিয়" #: standalone/drakvpn:485 #, c-format msgid "right" msgstr "ডান" #: standalone/drakvpn:486 #, c-format msgid "rightcert" msgstr "ডানসার্ট" #: standalone/drakvpn:487 #, c-format msgid "rightrsasigkey" msgstr "ডানrsasigkey" #: standalone/drakvpn:488 #, c-format msgid "rightsubnet" msgstr "ডানসার্ট" #: standalone/drakvpn:489 #, c-format msgid "rightnexthop" msgstr "ডানnexthop" #: standalone/drakvpn:497 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" "এই নামের একটি সেক্‌শন ইতিমধ্যেই বিদ্যমান আছে।\n" "সংযুক্তির নাম অদ্বিতীয় হতে হবে।\n" "\n" "আপনাকে পেছনে যেতে হবে এবং অন্য একটি সেক্‌শন যোগ করতে\n" "অথবা সেক্‌শনের নাম পরিবর্তন করতে হবে।\n" #: standalone/drakvpn:529 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "একটি নিরাপত্তা নীতি যোগ করো।\n" "\n" "আপনি এখন একটি নিরাপত্তা নীতি যোগ করতে পারেন।\n" "\n" "যখন আপনার তথ্য লেখা হয়ে যাবে তখন চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:562 standalone/drakvpn:812 #, c-format msgid "Edit section" msgstr "সেক্‌শন সম্পাদনা" #: standalone/drakvpn:563 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" "আপনার %s ফাইলের কয়েকটি সেক্‌শন অথবা সংযুক্তি আছে।\n" "\n" "সম্পাদনার জন্য আপনি নিচের যে কোন একটি ফাইল পছন্দ \n" "করতে পারেন এবং তখন পরবর্তী'তে ক্লিক করতে পারেন।\n" #: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817 #: standalone/drakvpn:863 #, c-format msgid "Section names" msgstr "সেক্‌শনগুলোর নাম" #: standalone/drakvpn:576 #, c-format msgid "Can not edit!" msgstr "সম্পাদনা করা যাচ্ছেনা !" #: standalone/drakvpn:577 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" "আপনি এই সেক্‌শন সম্পাদনা করতে পারেন না।\n" "\n" "এই সেক্‌শনটি শুধুমাত্র Freeswan 2.X এর জন্য।\n" "%s ফাইলের উপর একজনকে সংস্করণ ২.০ নির্দিষ্ট করে\n" "দিতে হবে, এবং নিষ্ক্রিয় বা\n" "সক্রিয় করতে হবে opportunistic encryption।\n" #: standalone/drakvpn:586 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "আপনার %s ফাইলের বেশকিছু অংশ আছে।\n" "\n" "আপনি এখন কন্‌ফিগ সেটআপ অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n" "তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:597 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" "আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n" "\n" "আপনি এখন ডিফল্ট অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n" "তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:610 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n" "\n" "আপনি এখন স্বাভাবিক অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n" "\n" "তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:631 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "নিরাপত্তা নীতি সম্পাদনা করো।\n" "\n" "আপনি এখন নিরাপত্তা নীতি যোগ করতে পারেন।\n" "\n" "তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n" #: standalone/drakvpn:642 standalone/drakvpn:859 #, c-format msgid "Remove section" msgstr "সেকশন মুছে ফেলো" #: standalone/drakvpn:643 standalone/drakvpn:860 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" "আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n" "\n" "আপনি নিচের কোন একটিকে মুছতে চাইলে পছন্দ করুন\n" "এবং পরবর্তী'তে ক্লিক করুন।\n" #: standalone/drakvpn:672 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" "racoon.conf ফাইলের কন্‌ফিগারেশন।\n" "\n" "এই ফাইলের বিষয়বস্তুগুলো বিভিন্ন অংশে বিভক্ত।\n" "আপনি এখন করতে পারেন:\n" " - প্রদর্শন \t\t (ফাইলের বিষয়বস্তু প্রদর্শন করতে)\n" " - যোগ \t\t (একটি অংশ যোগ করতে)\n" " - সম্পাদনা \t\t (বিদ্যমান অংশের প্যারামিটারে পরিবর্তন করতে)\n" " - মুছো \t\t (বিদ্যমান অংশ মুছে ফেলতে)\n" " - নিবদ্ধ \t\t (বাস্তব ফাইলের পরিবর্তন লিখতে)" #: standalone/drakvpn:700 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" "%s ফাইলটি বর্তমান নেই।\n" "\n" "এটা অবশ্যই কোন কন্‌ফিগারেশন হবে।\n" "\n" "আপনাকে পেছনে ফিরতে হবে এবং কন্‌ফিগার বেছে নিতে হবে।\n" #: standalone/drakvpn:714 #, c-format msgid "racoonf.conf entries" msgstr "racoon.conf এন্ট্রি" #: standalone/drakvpn:715 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" "'যোগ করো' সেক্‌শনের ধাপ।\n" "\n" "এখানে নিচে racoon.conf ফাইলের স্কেলেটন :\n" "\t'পাথ'\n" "\t'দূরবর্তী'\n" "\t'sainfo'\n" "\n" "যে সেক্‌শনটি যোগ করতে চান তা পছন্দ করুন।\n" #: standalone/drakvpn:721 #, c-format msgid "path" msgstr "পাথ" #: standalone/drakvpn:721 #, c-format msgid "remote" msgstr "দূরবর্তী" #: standalone/drakvpn:721 #, c-format msgid "sainfo" msgstr "sainfo" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" "'পাথ যোগ করো' অংশের ধাপ।\n" "\n" "পাথের অংশটা আপনার racoon.conf ফাইলের উপরে থাকে।\n" "\n" "অনলাইনে সাহায্য পাওয়ার জন্য আপনার মাউসটি সার্টিফিকেট এন্ট্রি'র উপর রাখুন।" #: standalone/drakvpn:732 #, c-format msgid "path type" msgstr "পাথের ধরণ" #: standalone/drakvpn:736 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" # "পাথ যোগ করার পাথ : একটি ফাইল যুক্ত করার জন্য নির্দিষ্ট পাথ\n" # "দেখিয়ে দিন। ফাইল Inclusion দেখিয়ে দিন।\n" # "\tউদাহরণস্বরুপ: '/etc/racoon' যুক্ত করার পাথ\n" # "\n" # "" # Real Sugar = আসল চিনি #: standalone/drakvpn:756 standalone/drakvpn:849 #, c-format msgid "real file" msgstr "আসল ফাইল" #: standalone/drakvpn:779 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "নিশ্চিত হোন যে আপনার racoon.conf ফাইলের উপরে ইতিমধ্যেই\n" "আপনার পাথে'র অংশ আছে।\n" "\n" "আপনি দূরবর্তী সেটিংস পছন্দ করতে পারেন।\n" "যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n" #: standalone/drakvpn:796 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" "নিশ্চিত হোন যে আপনার %s ফাইলের উপরে ইতিমধ্যেই\n" "আপনার পাথের অংশ আছে।\n" "\n" "আপনি sainfo সেটিংস পছন্দ করতে পারেন।\n" "যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n" #: standalone/drakvpn:813 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" "আপনার %s ফাইলের কয়েকটি অংশ বা সংযুক্তি আছে।\n" "\n" "নিচে দেয়া তালিকা থেকে আপনি যে কোন একটি সম্পাদনা করার জন্য\n" "বেছে নিতে পারেন এবং তখন পরবর্তী'র উপর ক্লিক করুন।\n" #: standalone/drakvpn:824 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" "আপনার %s ফাইলের কয়েকটি অংশ আছে।\n" "\n" "আপনি দূরবর্তী অংশের এন্ট্রিগুলো সম্পাদনা করতে পারেন।\n" "\n" "যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে পছন্দ নিন।\n" #: standalone/drakvpn:833 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" "আপনার %s ফাইলের কয়েকটি অংশ আছে।\n" "\n" "আপনি sainfo অংশের এন্ট্রিগুলো সম্পাদনা করতে পারেন।\n" "\n" "যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে পছন্দ নিন।" #: standalone/drakvpn:841 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" "এই সেক্‌শনটি আপনার %s ফাইলের উপরে\n" "রাখতে হবে।\n" "\n" "নিশ্চিত হোন যে সবগুলো সেক্‌শন এই পাথ সেক্‌শন\n" "অনুসরণ করবে।\n" "আপনি এখন পাথ এন্ট্রি সম্পাদনা করতে পারেন।\n" "\n" "যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n" #: standalone/drakvpn:848 #, c-format msgid "path_type" msgstr "পাথ_টাইপ" #: standalone/drakvpn:889 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" "সবকিছু কন্‌ফিগার করা হয়েছে।\n" "\n" "আপনি এখন ইন্টারনেটে রিসোর্স ভাগাভাগী করতে পারেন,\n" "নিরাপদ পথে, VPN সংযুক্তি ব্যবহার করে।\n" "\n" "আপনার নিশ্চিত উচিত যে tunnels shorewall সেক্‌শন\n" "কন্‌ফিগার করা হয়েছে।" #: standalone/drakvpn:909 #, c-format msgid "Sainfo source address" msgstr "Sainfo উত্‍সের ঠিকানা" # #msgstr "Sainfo উত্‍সের অ্যাড্রেস" #: standalone/drakvpn:910 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" "sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n" "IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n" "(IPsec-SA establishment).\n" "\n" "উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n" "\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n" "\n" "sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n" "\t203.178.141.209 হচ্ছে উত্‍সের ঠিকানা\n" "\n" "sainfo ঠিকানা 172.16.1.0/24 যেকোন ঠিকানা 172.16.2.0/24 যেকোনো\n" "\t172.16.1.0/24 হচ্ছে উত্‍সের ঠিকানা" #: standalone/drakvpn:927 #, c-format msgid "Sainfo source protocol" msgstr "Sainfo উত্‍সের প্রোটোকল" #: standalone/drakvpn:928 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" "sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n" "IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n" "(IPsec-SA establishment).\n" "\n" "উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n" "\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n" "\n" "sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n" "জায়গার প্রথম 'যেকোন' সবসময় যেকোন উত্‍স থেকে প্রোটোকল গ্রহণ করে" #: standalone/drakvpn:942 #, c-format msgid "Sainfo destination address" msgstr "Sainfo গন্তব্যের ঠিকানা" # ##msgstr "Sainfo গন্তব্যের অ্যাড্রেস" #: standalone/drakvpn:943 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" "sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n" "IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n" "(IPsec-SA establishment).\n" "\n" "উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n" "\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n" "\n" "sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n" "\t203.178.141.209 হচ্ছে গন্তব্যের ঠিকানা\n" "\n" "sainfo ঠিকানা 172.16.1.0/24 যেকোন ঠিকানা 172.16.2.0/24 যেকোনো\n" "\t172.16.1.0/24 হচ্ছে গন্তব্যের ঠিকানা" #: standalone/drakvpn:960 #, c-format msgid "Sainfo destination protocol" msgstr "Sainfo গন্তব্যের প্রোটোকল" #: standalone/drakvpn:961 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" "sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n" "IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n" "(IPsec-SA establishment).\n" "\n" "উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n" "\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n" "\n" "sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n" "জায়গার প্রথম 'যেকোন' সবসময় গন্তব্যের জন্য প্রোটোকল গ্রহণ করে" #: standalone/drakvpn:975 #, c-format msgid "PFS group" msgstr "পি-এফ-এস গ্রুপ" #: standalone/drakvpn:977 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" "Diffie-Hellman exponentiations এর গ্রুপ নির্দিষ্ট করো।\n" "আপনার যদি কোন পি-এফ-এস প্রয়োজন না হয় তাহলে এই ডিরেক্টিভ মুছে ফেলতে পারেন।\n" "আপনি কোন একটি নির্দিষ্ত করে না দেন তাহলে প্রস্তাব গ্রহণযোগ্য হবে।\n" "এখানকার যেকোন একটি গ্রুপ: modp768, modp1024, modp1536।\n" "অথবা আপনি ১, ২, বা ৫ হিসেবে DH গ্রুপ সংখ্যাগুলো নির্দিষ্ট করে দিতে পারেন।" #: standalone/drakvpn:982 #, c-format msgid "Lifetime number" msgstr "আজীবনের নম্বর" #: standalone/drakvpn:983 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" "আজীবনের একটা নির্দিষ্ট সময় নির্ধারণ করুন যা phase 1 \n" "negotiations এ প্রস্তাবিত হবে। যেকোন প্রস্তাব গ্রহণ করা\n" "হবে, এবং বৈশিষ্ট্যগুলো সঙ্গীর(peer) প্রতি প্রস্তাব করা হবে না\n" "যদি আপনি তাকে(তাদেরকে) নির্দিষ্ট করে না দেন। তারা প্রত্যেকে\n" "প্রতি প্রস্তাবের পৃথকভাবে নির্দিষ্ট করে দিতে পারে।\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "\t১ মিনিটের সময়সীমা; #সেকেন্ড,মিনিট,ঘন্টা\n" "\t১ মিনিটের সময়সীমা; #সেকেন্ড,মিনিট,ঘন্টা\n" "\t৩০ সেকেন্ডের সময়সীমা;\n" "\t৩০ সেকেন্ডের সময়সীমা;\n" "\t৬০ সেকেন্ডের সময়সীমা;\n" "\t১২ ঘন্টার সময়সীমা;\n" "\n" "সুতরাং, এখানে সময়সীমা সংখ্যাগুলো ১, ১, ৩০, ৬০ এবং ১২।\n" #: standalone/drakvpn:999 #, c-format msgid "Lifetime unit" msgstr "আজীবনের ইউনিট" #: standalone/drakvpn:1001 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" "আজীবনের একটা নির্দিষ্ট সময় নির্ধারণ করুন যা phase 1 \n" "negotiations এ প্রস্তাবিত হবে। যেকোন প্রস্তাব গ্রহণ করা\n" "হবে, এবং বৈশিষ্ট্যগুলো সঙ্গীর(peer) প্রতি প্রস্তাব করা হবে না\n" "যদি আপনি তাকে(তাদেরকে) নির্দিষ্ট করে না দেন। তারা প্রত্যেকে\n" "প্রতি প্রস্তাবের পৃথকভাবে নির্দিষ্ট করে দিতে পারে।\n" "\n" "উদাহরণস্বরুপ : \n" "\n" "\t১ মিনিটের সময়সীমা; #সেকেন্ড,মিনিট,ঘন্টা\n" "\t১ মিনিটের সময়সীমা; #সেকেন্ড,মিনিট,ঘন্টা\n" "\t৩০ সেকেন্ডের সময়সীমা;\n" "\t৩০ সেকেন্ডের সময়সীমা;\n" "\t৬০ সেকেন্ডের সময়সীমা;\n" "\t১২ ঘন্টার সময়সীমা;\n" "\n" "সুতরাং, এখানে সময়সীমা ইউনিটগুলো 'মিনিট', 'মিনিট', 'সেকেন্ড', 'সেকেন্ড', 'সেকেন্ড' " "এবং 'ঘন্টা'।\n" #: standalone/drakvpn:1019 #, c-format msgid "Authentication algorithm" msgstr "নির্ভরযোগ্য অ্যালগোরিদম" #: standalone/drakvpn:1021 #, c-format msgid "Compression algorithm" msgstr "সংক্ষিপ্ত করার অ্যালগোরিদম" #: standalone/drakvpn:1022 #, c-format msgid "deflate" msgstr "স্ফীতি হ্রাস" #: standalone/drakvpn:1029 #, c-format msgid "Remote" msgstr "দূরবর্তী" # সাম #: standalone/drakvpn:1030 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" "remote (address | anonymous) [[port]] { statements }\n" "প্রতিটি দূরবর্তী নোডের IKE ১ম পর্যায়ের প্যারামিটার নির্ধারন করে।\n" "ডিফল্ট পোর্ট হল ৫০০। যদি Anonymous বলা হয়ে থাকে\n" "statement গুলো সব peer এর ক্ষেত্রে প্রযোজ্য যেগুলো আর কোন\n" "দূরবর্তী ডিরেক্টিভের সাথে মিলে না।\n" "\n" "উদাহরন: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" #: standalone/drakvpn:1038 #, c-format msgid "Exchange mode" msgstr "বিনিময় মোড" # negotiation = নিস্পত্তি প্রক্রিয়ায় # initiator ‌= ইনিশিয়েটর #: standalone/drakvpn:1040 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" "racoon যখন ইনিশিয়েটর তখন ১ম পর্যায়ের আদান‌-প্রদান মোড\n" "ঠিক করে। যখন racoon রেসপন্ডার তখন এটি গ্রহনযোগ্য\n" "আদান‌-প্রদান মোডও বটে। একের অধিক মোড কমা দিয়ে\n" "আলাদা করে দেয়া যেতে পারে। সবগুলো মোডই গ্রহনযোগ্য।\n" "ইনিশিয়েটর হিসেবে racoon ১ম আদান‌-প্রদান মোডটি ব্যবহার\n" "করে।\n" #: standalone/drakvpn:1046 #, c-format msgid "Generate policy" msgstr "সাধারন নীতি" # negotiation = নিস্পত্তি প্রক্রিয়ায় # initiator ‌= ইনিশিয়েটর #: standalone/drakvpn:1048 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" "এই ডিরেক্টিভটি রেসপন্ডারের জন্য। অতএব আপনাকে passive সেটিংটি\n" "চালু করতে হবে যাতে racoon(8) শুধু রেসপন্ডার হিসেবে কাজ করে। যদি\n" "রেসপন্ডারটির ২য় নিস্পত্তি প্রক্রিয়ায় কোন SPD নীতি না থাকে, এবং\n" "ডিরেক্টিভটি চালু থাকে, তবে racoon ইনিশিয়েটর থেকে SA পেলোডের\n" "প্রস্তাবটি বেছে নেবে এবং এটি থেকেই নীতিমালা তৈরী করবে। যে ক্লায়েন্টের\n" "IP address ডাইনামিক ভাবে দেয়া হয়, তার সাথে নিস্পত্তি করাই শ্রেয়।\n" "মনে রাখবেন, ইনিশিয়েটরটি রেসপন্ডারের SPD তে সঠিক নীতি ইনস্টল\n" "নাও করতে পারে। এই ইনিশিয়েটর ও রেসপন্ডারের মাঝে নীতির অমিলের\n" "কারনে অনান্য যোগাযোগ বিঘ্ন হতে পারে। ইনিশিয়েটরের ক্ষেত্রে এই\n" "ডিরেক্টিভটি অগ্রায্য করা হয় যার ডিফল্ট মান বন্ধ। " #: standalone/drakvpn:1062 #, c-format msgid "Passive" msgstr "জড়" # ##অক্রিয় / স্থির #: standalone/drakvpn:1064 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" "আপনি মধ্যস্থতা আরম্ভ করতে না চান, তাহলে এটাকে চালু অবস্থায়\n" "সেট করুন। ডিফল্টভাবে এটা বন্ধ থাকে। এটা সার্ভারের জন্য খুব\n" "দরকারী।" #: standalone/drakvpn:1067 #, c-format msgid "Certificate type" msgstr "সার্টিফিকেটের ধরণ" #: standalone/drakvpn:1069 #, c-format msgid "My certfile" msgstr "আমার সার্টফাইল" #: standalone/drakvpn:1070 #, c-format msgid "Name of the certificate" msgstr "সার্টফাইলের নাম" #: standalone/drakvpn:1071 #, c-format msgid "My private key" msgstr "আমার ব্যক্তিগত কী" #: standalone/drakvpn:1072 #, c-format msgid "Name of the private key" msgstr "ব্যক্তিগত কী'র নাম" #: standalone/drakvpn:1073 #, c-format msgid "Peers certfile" msgstr "peers সার্টফাইল" #: standalone/drakvpn:1074 #, c-format msgid "Name of the peers certificate" msgstr "peers সার্টিফিকেটের নাম" # #Fix me #: standalone/drakvpn:1075 #, c-format msgid "Verify cert" msgstr "সার্টিফিকেট যাচাই" #: standalone/drakvpn:1077 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" "আপনি যদি কোন কারণে সঙ্গীর (peer) সার্টিফিকেট যাচাই করতে\n" "না চান, তাহলে এটাকে বন্ধ হিসেবে সেট করুন। তবে ডিফল্ট হিসেবে এটি চালু অবস্থায় থাকে।" # # Fix me #: standalone/drakvpn:1079 #, c-format msgid "My identifier" msgstr "আমার সনাক্রকারক" #: standalone/drakvpn:1080 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1100 #, c-format msgid "Peers identifier" msgstr "সঙ্গী সনাক্তকারক" # ##সংগী/সঙ্গী নির্দেশক #: standalone/drakvpn:1101 #, c-format msgid "Proposal" msgstr "প্রস্তাব" #: standalone/drakvpn:1103 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" "phase ১ নেগোশিয়েশনের জন্য ব্যবহৃত encryption অ্যালগোরিদম নির্দিষ্ট করুন.\n" "এই আদেশটি অবশ্যই বলা থাকবে।\n" "অ্যালগোরিদম নিচের যেকোন একটি: \n" "\n" "oakley এর জন্য DES, 3DES, blowfish, cast128 ।\n" "\n" "অন্যান্য রুপান্তরের জন্য, এই মন্তব্য ব্যবহৃত হবে না।" #: standalone/drakvpn:1110 #, c-format msgid "Hash algorithm" msgstr "হ্যাশ অ্যালগোরিদম" #: standalone/drakvpn:1112 #, c-format msgid "DH group" msgstr "DH গ্রুপ" #: standalone/drakvpn:1119 #, c-format msgid "Command" msgstr "কমান্ড" #: standalone/drakvpn:1120 #, c-format msgid "Source IP range" msgstr "আই-পি range এর উত্‍স" #: standalone/drakvpn:1121 #, c-format msgid "Destination IP range" msgstr "আই-পি range এর গন্তব্য" #: standalone/drakvpn:1122 #, c-format msgid "Upper-layer protocol" msgstr "উপরের স্তরের প্রোটোকল" #: standalone/drakvpn:1122 standalone/drakvpn:1129 #, c-format msgid "any" msgstr "যেকোন" #: standalone/drakvpn:1124 #, c-format msgid "Flag" msgstr "ফ্ল্যাগ" #: standalone/drakvpn:1125 #, c-format msgid "Direction" msgstr "গতিপথ" #: standalone/drakvpn:1126 #, c-format msgid "IPsec policy" msgstr "Ipsec নীতি" #: standalone/drakvpn:1126 #, c-format msgid "ipsec" msgstr "ipsec" #: standalone/drakvpn:1126 #, c-format msgid "discard" msgstr "অপ্রোজনীয়" #: standalone/drakvpn:1129 #, c-format msgid "tunnel" msgstr "টানেল" #: standalone/drakvpn:1129 #, c-format msgid "transport" msgstr "বাহন" #: standalone/drakvpn:1131 #, c-format msgid "Source/destination" msgstr "উত্‍স/গন্তব্য" #: standalone/drakvpn:1132 #, c-format msgid "require" msgstr "প্রয়োজন" #: standalone/drakvpn:1132 #, c-format msgid "default" msgstr "ডিফল্ট" #: standalone/drakvpn:1132 #, c-format msgid "use" msgstr "ব্যবহার" #: standalone/drakvpn:1132 #, c-format msgid "unique" msgstr "অদ্বিতীয়" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "ইউএসএ (ব্রডকাষ্ট)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "ইউএসএ (কেবল)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "ইউএসএ (কেবল-hrc)" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "কানাডা (কেবল)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "জাপান (ব্রডকাষ্ট)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "জাপান (কেবল)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "কানাডা (ব্রডকাষ্ট)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "পশ্চিম ইউরোপ" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "পূর্ব ইউরোপ" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "ফ্রান্স [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "নিউজিল্যান্ড" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "অস্ট্রেলিয়ান Optus ক্যাবল টিভি" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "অনুগ্রহ করে,\n" "আপনার টিভি norm এবং দেশ টাইপ করুন" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "টিভির ধরন:" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "জায়গা:" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "টিভি চ্যানেলের খোঁজে উন্নতি হচ্ছে ..." #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "টিভি চ্যানেলের খোঁজ চলছে" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "টিভি চ্যানেলের খোঁজ করার সময় একটি ত্রুটি হয়েছে" # আমার মত করে লিখলাম। মাইন্ড করবেননা #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "একটি সুন্দর দিনের শুভেচ্ছা!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "আপনি এখন xawtv (X উইন্ডোর মধ্যে!) চালাতে পারবেন !\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "কোন টিভি কার্ড পাওয়া যায় নি!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" msgstr "" "আপনি মেশিনে কোন টিভি কার্ড পাওয়া যায় নি। অনুগ্রহ করে পরীক্ষা করুন যে লিনাক্স-" "সমর্থিত ভিডিও/টিভি কার্ড সঠিকভাবে সংযুক্ত আছে।\n" "\n" "\n" "আপনি আমাদের হার্ডওয়্যার ডাটাবেজে ঘুরে আসতে পারেন:\n" "\n" "\n" "http://www.mandrivalinux.com/en/hardware.php3" #: standalone/harddrake2:25 #, c-format msgid "Alternative drivers" msgstr "বিকল্প ড্রাইভার" #: standalone/harddrake2:26 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "এই সাউন্ড কার্ডের জন্য বিকল্প ড্রাইভারের তালিকা" #: standalone/harddrake2:29 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "এটা হচ্ছে ফিজিকাল বাস (physical bas) যেখানে যন্ত্রগুলো যুক্ত থাকে (যেমন: পি-সি-আই, " "ইউএসবি, ...)" #: standalone/harddrake2:31 standalone/harddrake2:146 #, c-format msgid "Bus identification" msgstr "বাস পরিচিতি" #: standalone/harddrake2:32 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- পিসিআই এবং ইউএসবি যন্ত্র: এটা নির্মাতা, যন্ত্র, সহযোগী নির্মাতা এবং সহযোগী যন্ত্র " "পিসিআই/ইউএসবি আই-ডি'র তালিকা করে" #: standalone/harddrake2:35 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- pci যন্ত্র: এটা এই কার্ডের pci স্লট, যন্ত্র এবং ফাংশন দেয়\n" "- eide যন্ত্র: যন্ত্রটি হয় slave অথবা master যন্ত্র\n" "- scsi যন্ত্র: scsi bus এবং scsi যন্ত্রের আই-ডি" #: standalone/harddrake2:38 #, c-format msgid "Drive capacity" msgstr "ড্রাইভের ক্ষমতা" #: standalone/harddrake2:38 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "ড্রাইভের বিশেষ ক্ষমতা (বার্নিং ক্ষমতা বা DVD সাপোর্ট)" #: standalone/harddrake2:39 #, c-format msgid "this field describes the device" msgstr "এই ফিল্ড যন্ত্রগুলোকে বর্ণনা করে" #: standalone/harddrake2:40 #, c-format msgid "Old device file" msgstr "পুরাতন যন্ত্র ফাইল" #: standalone/harddrake2:41 #, c-format msgid "old static device name used in dev package" msgstr "পুরাতন স্থির যন্ত্রের নাম dev প্যাকেজে ব্যবহৃত হয়" #: standalone/harddrake2:42 #, c-format msgid "New devfs device" msgstr "নতুন devfs যন্ত্র" #: standalone/harddrake2:43 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "কোর কার্ণেল devfs কর্তৃক তৈরীকৃত নতুন গতিশীল যন্ত্রের নাম" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "মডিউল" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "জীএনইউ(GNU)/লিনাক্স কার্ণেলের মডিউল যা যন্ত্রপাতি ব্যবহার করে" #: standalone/harddrake2:47 #, c-format msgid "Extended partitions" msgstr "বর্ধিত পার্টিশনসমুহ" #: standalone/harddrake2:47 #, c-format msgid "the number of extended partitions" msgstr "বর্ধিত পার্টিশনসমুহের সংখ্যা" #: standalone/harddrake2:48 #, c-format msgid "Geometry" msgstr "জ্যামিতি" # #Geometry #: standalone/harddrake2:48 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "ডিস্কের সিলিন্ডার/হেড/সেক্টর জ্যামিতি" #: standalone/harddrake2:49 #, c-format msgid "Disk controller" msgstr "ডিস্ক নিয়ন্ত্রক" #: standalone/harddrake2:49 #, c-format msgid "the disk controller on the host side" msgstr "হোস্টের দিক্‌কার ডিস্ক নিয়ন্ত্রক" #: standalone/harddrake2:50 #, c-format msgid "class of hardware device" msgstr "হার্ডওয়ার যন্ত্রের শ্রেণী" #: standalone/harddrake2:51 standalone/harddrake2:83 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "মডেল" #: standalone/harddrake2:51 #, c-format msgid "hard disk model" msgstr "হার্ড ডিস্কের মডেল" #: standalone/harddrake2:52 #, c-format msgid "network printer port" msgstr "নেটওয়ার্ক প্রিন্টার পোর্ট" #: standalone/harddrake2:53 #, c-format msgid "Primary partitions" msgstr "প্রাইমারী পার্টিশনসমূহ" #: standalone/harddrake2:53 #, c-format msgid "the number of the primary partitions" msgstr "প্রাইমারী পার্টিশনসমুহের সংখ্যা" #: standalone/harddrake2:54 #, c-format msgid "the vendor name of the device" msgstr "ডিভাইস নির্মাতার নাম" #: standalone/harddrake2:55 #, c-format msgid "Bus PCI #" msgstr "বাস পিসিআই #" #: standalone/harddrake2:55 #, c-format msgid "the PCI bus on which the device is plugged" msgstr "যেই যন্ত্রটি যুক্ত সেখানে পিসিআই বাস" #: standalone/harddrake2:56 #, c-format msgid "PCI device #" msgstr "পিসিআই ডিভাইস #" #: standalone/harddrake2:56 #, c-format msgid "PCI device number" msgstr "পিসিআই ডিভাইস নম্বর" #: standalone/harddrake2:57 #, c-format msgid "PCI function #" msgstr "পিসিআই ফাংশন #" #: standalone/harddrake2:57 #, c-format msgid "PCI function number" msgstr "পিসিআই ফাংশন নম্বর" #: standalone/harddrake2:58 #, c-format msgid "Vendor ID" msgstr "পরিবেশক আইডি" #: standalone/harddrake2:58 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "এটা হচ্ছে বিক্রেতার আদর্শ সংখ্যাভিত্তিক চিহ্নিতকারক" #: standalone/harddrake2:59 #, c-format msgid "Device ID" msgstr "ডিভাইস আইডি:" #: standalone/harddrake2:59 #, c-format msgid "this is the numerical identifier of the device" msgstr "এটা হচ্ছে যন্ত্রটির সংখ্যাভিত্তিক চিহ্নিতকারক" #: standalone/harddrake2:60 #, c-format msgid "Sub vendor ID" msgstr "সাব ভেন্ডর আইডি" #: standalone/harddrake2:60 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "এটা হচ্ছে যন্ত্রটির ছোটখাটমানের সংখ্যাভিত্তিক চিহ্নিতকারক" #: standalone/harddrake2:61 #, c-format msgid "Sub device ID" msgstr "সাব ডিভাইস আইডি" #: standalone/harddrake2:61 #, c-format msgid "this is the minor numerical identifier of the device" msgstr "এটা হচ্ছে যন্ত্রটির সংখ্যাভিত্তিক চিহ্নিতকারক" #: standalone/harddrake2:62 #, c-format msgid "Device USB ID" msgstr "ডিভাইস ইউএসবি আইডি" #: standalone/harddrake2:62 #, c-format msgid ".." msgstr ".." #: standalone/harddrake2:66 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:66 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "বুট করার সময় গণনাকারী নির্ধারণ করার জন্য জি-এন-ইউ/লিনাক্স কার্ণেলের একটি গণনাকারী " "লুপ (loop) চালু করা প্রয়োজন। এটার ফলাফল সি-পি-ইউ'র \"benchmark\" বরাবর bogomips " "হিসেবে জমা থাকে।" #: standalone/harddrake2:67 #, c-format msgid "Cache size" msgstr "ক্যাশ সাইজ" #: standalone/harddrake2:67 #, c-format msgid "size of the (second level) cpu cache" msgstr "সি-পি-ইউ'র (দ্বিতীয় লেভেল) আকার" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:70 #, c-format msgid "Coma bug" msgstr "Coma ত্রুটি" #: standalone/harddrake2:70 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "যেখানে এই সি-পি-ইউ'র Cyrix ৬x৮৬ Coma ত্রুটি আছে" #: standalone/harddrake2:71 #, c-format msgid "Cpuid family" msgstr "Cpuid পরিবার" #: standalone/harddrake2:71 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "cpu এর পরিবার (যেমন: i686 শ্রেনীর জন্য ৬)" #: standalone/harddrake2:72 #, c-format msgid "Cpuid level" msgstr "Cpuid লেভেল" #: standalone/harddrake2:72 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "তথ্যসংক্রান্ত লেভেল cpuid তথ্যের মধ্য দিয়ে পাওয়া যাবে" #: standalone/harddrake2:73 #, c-format msgid "Frequency (MHz)" msgstr "ফ্রিকোয়েন্সী (MHz)" #: standalone/harddrake2:73 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "সি-পি-ইউ ফ্রিকোয়েন্সি মেগাহার্টজে (মেগাহার্টজ যা হচ্ছে প্রতি সেকেন্ডে সি-পি-ইউ " "কতগুলো আদেশ সম্পাদন করতে সক্ষম)" #: standalone/harddrake2:74 #, c-format msgid "Flags" msgstr "ফ্ল্যাগ" #: standalone/harddrake2:74 #, c-format msgid "CPU flags reported by the kernel" msgstr "কার্ণেলের দ্বারা রিপোর্টকৃত CPU ফ্ল্যাগ" #: standalone/harddrake2:75 #, c-format msgid "Fdiv bug" msgstr "Fdiv ত্রুটি" #: standalone/harddrake2:76 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "প্রথম দিককার প্রস্তুতকৃত ইন্টেল পেন্টিয়াম চিপে তাদের দশমিক সংখ্যার প্রসেসরে কিছু ত্রুটি " "আছে যেগুলো যথাযথভাবে দশমিক সংখ্যার ভাগ করতে পারত না (FDIV)" #: standalone/harddrake2:77 #, c-format msgid "Is FPU present" msgstr "FPU কি উপস্থিত আছে" #: standalone/harddrake2:77 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "হ্যা তার মানে প্রসেসরের একটি পাটীগাণিতিক (arithmatic) কো-প্রসেসর আছে" #: standalone/harddrake2:78 #, c-format msgid "Whether the FPU has an irq vector" msgstr "যখন FPU এর একটি irq ভেক্টর আছে" #: standalone/harddrake2:78 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" "হ্যা তার মানে পাটীগাণিতিক (arithmatic) কো-প্রসেসরের সাথে ব্যতিক্রমি একটি ভেক্টর " "যুক্ত আছে" #: standalone/harddrake2:79 #, c-format msgid "F00f bug" msgstr "F00f ত্রুটি" #: standalone/harddrake2:79 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" "প্রথম দিককার পেন্টিয়ামগুলো ত্রুটিযুক্ত এবং স্থির হয়ে যায় যখন তা F00F বাইটকোড ডিকোড " "করে" #: standalone/harddrake2:80 #, c-format msgid "Halt bug" msgstr "ত্রুটি থামাও" #: standalone/harddrake2:81 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "প্রথম দিক্‌কার কিছু i486DX-100 চিপ \"থামো\" আদেশ ব্যবহৃত হওয়ার পর আর স্বাভাবিক " "অবস্থায় ফিরতে পারে না" #: standalone/harddrake2:82 #, c-format msgid "sub generation of the cpu" msgstr "cpu এর সাব-জেনারেশন" #: standalone/harddrake2:83 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "cpu এর জেনারেশন (যেমন: পেন্টিয়াম ৩ এর জন্য ৮, ...)" #: standalone/harddrake2:84 #, c-format msgid "Model name" msgstr "মডেলের নাম" #: standalone/harddrake2:84 #, c-format msgid "official vendor name of the cpu" msgstr "cpu এর অফিসিয়াল নির্মাতার নাম" #: standalone/harddrake2:85 #, c-format msgid "the name of the CPU" msgstr "CPU এর নাম" #: standalone/harddrake2:86 #, c-format msgid "Processor ID" msgstr "প্রসেসর আইডি" #: standalone/harddrake2:86 #, c-format msgid "the number of the processor" msgstr "প্রসেসর নম্বর" #: standalone/harddrake2:87 #, c-format msgid "Model stepping" msgstr "মডেল পদক্ষেপ" #: standalone/harddrake2:87 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "সি-পি-ইউ'র পদক্ষেপ (সাব মডেল (জেনারেশন) নম্বর)" #: standalone/harddrake2:88 #, c-format msgid "the vendor name of the processor" msgstr "প্রসেসর নির্মাতার নাম" #: standalone/harddrake2:89 #, c-format msgid "Write protection" msgstr "লেখা প্রতিরোধ" #: standalone/harddrake2:89 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "সিপিইউ'র CR0 রেজিস্টারে থাকা WP ফ্ল্যাগ জোর করে মেমরি পেজ লেভেলে কোন কিছু লেখা " "প্রতিরোধ করে, এটা প্রসেসরকে পরীক্ষা না করা কার্নেলকে ব্যবহারকারীর মেমরিতে প্রবেশ " "প্রতিরোধ করে (aka এটা একটি ত্রুটি বিরুদ্ধ পাহারাদার)" #: standalone/harddrake2:93 #, c-format msgid "Floppy format" msgstr "ফ্লপি ফরম্যাট" #: standalone/harddrake2:93 #, c-format msgid "format of floppies supported by the drive" msgstr "ড্রাইভ সমর্থিত ফ্লপির ফরম্যাট" #: standalone/harddrake2:97 #, c-format msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI চ্যানেল" #: standalone/harddrake2:98 #, c-format msgid "Disk identifier" msgstr "ডিস্ক চিহ্নিতকারক" #: standalone/harddrake2:98 #, c-format msgid "usually the disk serial number" msgstr "ডিস্কের স্বাভাবিক ধারাবাহিক সংখ্যা" #: standalone/harddrake2:99 #, c-format msgid "Logical unit number" msgstr "লজিকাল ইউনিট সংখ্যা" #: standalone/harddrake2:99 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" "SCSI লক্ষ্য সংখ্যা (LUN)। SCSI যন্ত্রগুলো একটি হোস্টের সংগে যুক্ত যেগুলো এটি একটি " "চ্যানেল সংখ্যা, একটি লক্ষ্যমাত্রার আইডি \n" "এবং একটি লজিকাল ইউনিট সংখ্যা কর্তৃক অদ্বিতীয়ভাবে চিহ্নিত" # সাম #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:106 #, c-format msgid "Installed size" msgstr "ইনস্টলপরবর্তী আকার" # সাম #: standalone/harddrake2:106 #, c-format msgid "Installed size of the memory bank" msgstr "মেমরী ব্যংকটির ইনস্টকৃত আকার" # সাম #: standalone/harddrake2:107 #, c-format msgid "Enabled Size" msgstr "সক্রিয়কৃত আকার" # সাম #: standalone/harddrake2:107 #, c-format msgid "Enabled size of the memory bank" msgstr "মেমরী ব্যংকের সক্রিয়কৃত আকার" # সাম #: standalone/harddrake2:108 #, c-format msgid "type of the memory device" msgstr "মেমরী ডিভাইসের ধরন" # সাম #: standalone/harddrake2:109 #, c-format msgid "Speed" msgstr "গতি" # সাম #: standalone/harddrake2:109 #, c-format msgid "Speed of the memory bank" msgstr "মেমরী ব্যংকের গতি" # সাম #: standalone/harddrake2:110 #, c-format msgid "Bank connections" msgstr "ব্যাংক সংযোগসমূহ" # সাম: নাম, উপাধি, ধরন? #: standalone/harddrake2:111 #, c-format msgid "Socket designation of the memory bank" msgstr "মেমরী ব্যংকটির সকেটের নাম" #: standalone/harddrake2:115 #, c-format msgid "Device file" msgstr "ডিভাইস ফাইল" #: standalone/harddrake2:115 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "মাউসের জন্য কার্ণেল ড্রাইভারের সাথে যোগাযোগে ব্যবহৃত ডিভাইস ফাইল" #: standalone/harddrake2:116 #, c-format msgid "Emulated wheel" msgstr "সমকক্ষ চাকা" #: standalone/harddrake2:116 #, c-format msgid "whether the wheel is emulated or not" msgstr "চাকা সমকক্ষ হবে কিংবা হবে না" #: standalone/harddrake2:117 #, c-format msgid "the type of the mouse" msgstr "মাউসের ধরণ" #: standalone/harddrake2:118 #, c-format msgid "the name of the mouse" msgstr "মাউসের নাম" #: standalone/harddrake2:119 #, c-format msgid "Number of buttons" msgstr "বাটনের নম্বর" #: standalone/harddrake2:119 #, c-format msgid "the number of buttons the mouse has" msgstr "মাউসের বাটন সংখ্যা" #: standalone/harddrake2:120 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "মাউসটি যে বাসে সংযুক্ত তার ধরণ" #: standalone/harddrake2:121 #, c-format msgid "Mouse protocol used by X11" msgstr "X11 কর্তৃক ব্যবহৃত মাউস প্রোটোকল" #: standalone/harddrake2:121 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "মাউসের সাথে গ্রাফিকাল ডেস্কটপ ব্যবহারের প্রোটোকল" #: standalone/harddrake2:128 standalone/harddrake2:137 #: standalone/harddrake2:144 standalone/harddrake2:152 #: standalone/harddrake2:318 #, c-format msgid "Identification" msgstr "শনাক্তকারন" #: standalone/harddrake2:129 standalone/harddrake2:145 #, c-format msgid "Connection" msgstr "সংযোগ" #: standalone/harddrake2:138 #, c-format msgid "Performances" msgstr "সম্পাদন কার্য" #: standalone/harddrake2:139 #, c-format msgid "Bugs" msgstr "প্রোগ্রাম ত্রুটিসমূহ" # ##বাগ সমূহ #: standalone/harddrake2:140 #, c-format msgid "FPU" msgstr "এফপিউ" #: standalone/harddrake2:147 #, c-format msgid "Device" msgstr "ডিভাইস" #: standalone/harddrake2:148 #, c-format msgid "Partitions" msgstr "পার্টিশনসমূহ" #: standalone/harddrake2:153 #, c-format msgid "Features" msgstr "বৈশিষ্ট্যসমূহ" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:176 standalone/logdrake:76 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/অপশন (_ও)" #: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/সাহায্য _য" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _printers" msgstr "/স্বয়ংক্রিয় ছাপাযন্ত্র" # ##msgstr "/স্বয়ংক্রিয় প্রিন্টার" #: standalone/harddrake2:182 #, c-format msgid "/Autodetect _modems" msgstr "/স্বয়ংক্রিয় মডেম (_ম)" #: standalone/harddrake2:183 #, c-format msgid "/Autodetect _jaz drives" msgstr "/স্বয়ংক্রিয় জায (jaz) ড্রাইভ (_J)" #: standalone/harddrake2:184 #, c-format msgid "/Autodetect parallel _zip drives" msgstr "" # সাম: # not sure about /_Upload #: standalone/harddrake2:191 #, c-format msgid "/_Upload the hardware list" msgstr "/হার্ডওয়্যার তালিকা _আপলোড করো" #: standalone/harddrake2:192 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/পরিত্যাগ (_প)" #: standalone/harddrake2:205 #, c-format msgid "/_Fields description" msgstr "/ফিল্ডের বর্ণনা (_ফ)" #: standalone/harddrake2:207 #, c-format msgid "Harddrake help" msgstr "হার্ডড্রেকের সাহায্য" #: standalone/harddrake2:216 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "কখনো যদি কোন যন্ত্র চিহ্নিত করে থাকেন, তাহলে আপনি ডান ফ্রেমে\"তথ্য\" যন্ত্র সম্পর্কিত " "তচথ্য দেখতে সমর্থ হবেন" #: standalone/harddrake2:222 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_বাগ রিপোর্ট করো" #: standalone/harddrake2:224 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_সম্বন্ধে..." #: standalone/harddrake2:225 #, c-format msgid "About Harddrake" msgstr "হার্ডড্রেক সম্পর্কে" # সাম #. -PO: Do not alter the and tags #: standalone/harddrake2:227 #, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandriva.com>\n" "\n" msgstr "" "এটা হচ্ছে HardDrake, %s এর একটি হার্ডওয়্যার কনফিগারেশন টুল।\n" "সংস্করণ: %s\n" "লেখক: থিয়েরি ভিগ্‌নদ <" "tvignaud@mandriva.com>\n" "\n" #: standalone/harddrake2:241 #, c-format msgid "Harddrake2" msgstr "হার্ডড্রেক২" #: standalone/harddrake2:255 #, c-format msgid "Detected hardware" msgstr "সনাক্তকৃত হার্ডওয়্যার" #: standalone/harddrake2:260 #, c-format msgid "Configure module" msgstr "মডিউল কনফিগার করো" #: standalone/harddrake2:267 #, c-format msgid "Run config tool" msgstr "কনফিগ টুল চালাও" #: standalone/harddrake2:305 standalone/net_monitor:103 #: standalone/net_monitor:104 standalone/net_monitor:109 #, c-format msgid "unknown" msgstr "অজানা" #: standalone/harddrake2:306 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "অজানা" #: standalone/harddrake2:326 #, c-format msgid "Misc" msgstr "আনুসাঙ্গিক" #: standalone/harddrake2:341 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "বামপাশের ট্রীতে কোন একটি যন্ত্রের উপর ক্লিক করুন এখানে তার সম্পর্কে তথ্য দেখার জন্য।" #: standalone/harddrake2:393 #, c-format msgid "secondary" msgstr "মাধ্যমিক" #: standalone/harddrake2:393 #, c-format msgid "primary" msgstr "প্রাইমারী" #: standalone/harddrake2:397 #, c-format msgid "burner" msgstr "বার্ণার" #: standalone/harddrake2:397 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:543 standalone/harddrake2:546 #, c-format msgid "Upload the hardware list" msgstr "হার্ডওয়্যার তালিকা আপলোড করো" #: standalone/harddrake2:548 #, c-format msgid "Account:" msgstr "অ্যাকাউন্ট:" #: standalone/harddrake2:549 #, c-format msgid "Password:" msgstr "পাসওয়ার্ড:" #: standalone/harddrake2:550 #, c-format msgid "Hostname:" msgstr "হোস্টের নাম:" #: standalone/keyboarddrake:30 #, c-format msgid "Please, choose your keyboard layout." msgstr "অনুগ্রহ করে আপনার কী-বোর্ড লেআউট পছন্দ করুন।" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "আপনি কি কনসোলে ব্যাকস্পেসকে ডিলিট হিসাবে কাজ করাতে চান?" # সাম #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:43 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" "পরিবর্তন সাধিত হয়েছে, কিন্তু কার্যকরী হবার জন্য আপনাকে অবশ্যই রি-ষ্টার্ট করতে হবে" #: standalone/logdrake:49 #, c-format msgid "Mandriva Linux Tools Logs" msgstr "Mandriva Linux টুলসমুহের লগ" # ##যন্ত্রপাতি # Logdrake-এর কোন বাংলা হবে বলে আমার মনে হয়না। #: standalone/logdrake:50 #, c-format msgid "Logdrake" msgstr "Logdrake" #: standalone/logdrake:63 #, c-format msgid "Show only for the selected day" msgstr "শুধুমাত্র নির্বাচিত দিনসমূহে দেখাবে" #: standalone/logdrake:70 #, c-format msgid "/File/_New" msgstr "/File/_নতুন" # X11 keysyms must be used here; # bengali letter "ন" is 0x10009a8 #: standalone/logdrake:70 #, c-format msgid "N" msgstr "0x10009a8" #: standalone/logdrake:71 #, c-format msgid "/File/_Open" msgstr "/File/_খোলো" # X11 keysyms must be used here; # bengali letter "ও" is 0x1000993 #: standalone/logdrake:71 #, c-format msgid "O" msgstr "0x1000993" #: standalone/logdrake:72 #, c-format msgid "/File/_Save" msgstr "/ফাইল/সংরক্ষণ (_স)" # X11 keysyms must be used here; # bengali letter "এ" is 0x100098f #: standalone/logdrake:72 #, c-format msgid "S" msgstr "0x100098f" #: standalone/logdrake:73 #, c-format msgid "/File/Save _As" msgstr "/ফাইল/সংরক্ষণের রূপ (_র)" #: standalone/logdrake:74 #, c-format msgid "/File/-" msgstr "/ফাইল/-" #: standalone/logdrake:77 #, c-format msgid "/Options/Test" msgstr "/অপশন/বাছাই" #: standalone/logdrake:79 #, c-format msgid "/Help/_About..." msgstr "/সাহায্য/_সম্বন্ধে..." #: standalone/logdrake:108 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "বিশুদ্ধতা" #: standalone/logdrake:109 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "ব্যবহারকারী" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "বার্তাসমূহ" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "Syslog" #: standalone/logdrake:115 #, c-format msgid "search" msgstr "খোঁজ" #: standalone/logdrake:127 #, c-format msgid "A tool to monitor your logs" msgstr "আপনার লগ পর্যবেক্ষন করার একটি টুল" #: standalone/logdrake:128 standalone/net_applet:276 standalone/net_monitor:94 #, c-format msgid "Settings" msgstr "সেটিং" #: standalone/logdrake:133 #, c-format msgid "Matching" msgstr "মিলানো" #: standalone/logdrake:134 #, c-format msgid "but not matching" msgstr "কিন্তু মিলছে না" #: standalone/logdrake:138 #, c-format msgid "Choose file" msgstr "ফাইল পছন্দ করো" #: standalone/logdrake:147 #, c-format msgid "Calendar" msgstr "কেলেন্ডার" #: standalone/logdrake:157 #, c-format msgid "Content of the file" msgstr "ফাইলের সূচী" #: standalone/logdrake:161 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "মেইল সংকেত" #: standalone/logdrake:168 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "সংকেত সাহায্যকারীটি অনাকাঙ্খিতভাবে বিফল হয়েছে:" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "অনুগ্রহ করে অপেক্ষা করুন, ফাইলের শব্দ বিশ্লেষণ হচ্ছে: %s" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "এ্যপাচী ওয়াল্ড ওয়াইড ওয়েব সার্ভার" #: standalone/logdrake:377 #, c-format msgid "Domain Name Resolver" msgstr "ডোমেইনের নাম সমাধান (Resolve)...." #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "Ftp সার্ভার" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Postfix মেইল সার্ভার" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Samba সার্ভার" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Webmin সার্ভিস" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Xinetd সার্ভিস" #: standalone/logdrake:394 #, c-format msgid "Configure the mail alert system" msgstr "মেইলের সংকেত সিস্টেমটি কনফিগার করো" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "মেইলের সংকেত সিস্টেমটি বন্ধ করো" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "মেইলের সংকেত কনফিগারেশন" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "মেইল কনফিগারেশন ইউটিলিটিতে আপনাকে স্বাগতম।\n" "\n" "এখানে আপনি আপানার সংকেতের সিস্টেম সেট করতে পারবেন।\n" #: standalone/logdrake:406 #, c-format msgid "What do you want to do?" msgstr "আপনি কি করতে চান?" #: standalone/logdrake:413 #, c-format msgid "Services settings" msgstr "সার্ভিসের সেটিংসমূহ" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "নির্বাচিত সার্ভিসটি আর না চললে আপনি একটি সংকেত পাবেন" #: standalone/logdrake:421 #, c-format msgid "Load setting" msgstr "সেটিং লোড করো" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "এই মানের চাইতের বেশী লোড হলে আপনি একটি সংকেত পাবেন" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "লোড" #: standalone/logdrake:428 #, c-format msgid "Alert configuration" msgstr "সংকেত কনফিগারেশন" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "নীচে আপনার ইমেইল ঠিকানা প্রবেশ করুন" #: standalone/logdrake:430 #, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "" "এবং আপনি যেই SMTP সার্ভারটি ব্যবহার করতে চান তার নাম (অথবা IP ঠিকানা) প্রবেশ করুন" #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "এই সাহায্যকারীটি সঠিকভাবে মেইল এলার্ট কনফিগার করেছে।" #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "এই সাহায্যকারীটি সঠিকভাবে মেইল এলার্ট নিষ্কৃয় করেছে।" #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "...এর মত সেভ করো" #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "অনুগ্রহ করে আপনার মাউসের ধরণ পছন্দ করুন।" #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "তৃতীয় বাটনকে অনুকরণ করব?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "মাউস পরীক্ষা" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "আপনার মাউস পরীক্ষা করুন:" #: standalone/net_applet:51 #, c-format msgid "Network is up on interface %s" msgstr "নেটওয়ার্ট %s ইন্টারফেস এ চালু আছে" # সাম #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:54 #, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "%s ইন্টারফেসে নেটওয়ার্ক নিষ্ক্রিয়। \"নেটওয়ার্ক কনফিগার\" ক্লিক করুন" #: standalone/net_applet:60 standalone/net_monitor:469 #, c-format msgid "Connect %s" msgstr "%s সংযুক্ত করো" #: standalone/net_applet:61 standalone/net_monitor:469 #, c-format msgid "Disconnect %s" msgstr "%s বিচ্ছিন্ন করো" #: standalone/net_applet:62 #, c-format msgid "Monitor Network" msgstr "নেটওয়ার্ক মনিটর" #: standalone/net_applet:63 #, c-format msgid "Manage wireless networks" msgstr "" #: standalone/net_applet:64 #, c-format msgid "Configure Network" msgstr "নেটওয়ার্ক কনফিগার" #: standalone/net_applet:66 #, c-format msgid "Watched interface" msgstr "যে সব ইন্টারফেসের উপর নজর রাখা হয়েছে" # সাম #: standalone/net_applet:75 #, c-format msgid "Profiles" msgstr "প্রোফাইলসমূহ" #: standalone/net_applet:84 #, c-format msgid "Get Online Help" msgstr "অনলাইন সহায়তা নিন" # sam: "Interactive intrusion" was translated as পারস্পরিক সংযোগশীল #: standalone/net_applet:262 #, c-format msgid "Interactive intrusion detection" msgstr "পারস্পরিক সংযোগশীল অনধিকার প্রবেশ সনাক্তকরণ " #: standalone/net_applet:267 #, c-format msgid "Always launch on startup" msgstr "সবসময় স্টার্টআপে আরম্ভ করো" #: standalone/net_applet:271 #, c-format msgid "Actions" msgstr "" # সাম #: standalone/net_applet:330 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "%s দ্বারা একটি পোর্ট স্ক্যানিং আক্রমনের চেষ্টা করা হয়েছে।" # সাম #: standalone/net_applet:331 #, c-format msgid "The %s service has been attacked by %s." msgstr "%s দ্বারা %s সার্ভিসটি আক্রান্ত হয়েছে।" # সাম #: standalone/net_applet:332 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "%s দ্বারা একটি পাসওয়ার্ড ভাঙার আক্রমনের চেষ্টা করা হয়েছে।" # সাম: not sure #: standalone/net_applet:340 #, c-format msgid "Active Firewall: intrusion detected" msgstr "সক্রিয় ফায়ারওয়াল: অনধিকার প্রবেশ সনাক্ত হয়েছে!" # সাম #: standalone/net_applet:351 #, c-format msgid "Do you want to blacklist the attacker?" msgstr "আপনি কি আক্রমনকারীকে কালো তালিকাভুক্ত করতে চান?" # সাম #: standalone/net_applet:365 #, c-format msgid "Always blacklist (do not ask again)" msgstr "সবসময় কালো তালিকাভুক্ত করো (আর কখনো প্রশ্ন করবে না)" # সাম #: standalone/net_applet:368 #, c-format msgid "Attack details" msgstr "আক্রমনের বিস্তারিত" # সাম #: standalone/net_applet:372 #, c-format msgid "Attack time: %s" msgstr "আক্রমনের সময়: %s" # সাম #: standalone/net_applet:373 #, c-format msgid "Network interface: %s" msgstr "নেটওয়ার্ক ইন্টারফেস: %s" # সাম #: standalone/net_applet:374 #, c-format msgid "Attack type: %s" msgstr "আক্রমনের ধরণ: %s" # সাম #: standalone/net_applet:375 #, c-format msgid "Protocol: %s" msgstr "প্রোটোকল: %s" # সাম #: standalone/net_applet:376 #, c-format msgid "Attacker IP address: %s" msgstr "আক্রমনকারীর IP অ্যাড্রেস: %s" # সাম #: standalone/net_applet:377 #, c-format msgid "Attacker hostname: %s" msgstr "আক্রমনকারীর হোস্টনেম: %s" # সাম #: standalone/net_applet:378 #, c-format msgid "Service attacked: %s" msgstr "আক্রান্ত সার্ভিস: %s" # sam #: standalone/net_applet:379 #, c-format msgid "Port attacked: %s" msgstr "আক্রান্ত পোর্ট: %s" # সাম #: standalone/net_applet:380 #, c-format msgid "Type of ICMP attack: %s" msgstr "ICMP আক্রমনের ধরণ: %s" #: standalone/net_monitor:58 standalone/net_monitor:63 #, c-format msgid "Network Monitoring" msgstr "নেটওয়ার্ক পর্যবেক্ষণ" #: standalone/net_monitor:99 #, c-format msgid "Global statistics" msgstr "বিশ্বব্যাপী পরিসংখ্যান" #: standalone/net_monitor:102 #, c-format msgid "Instantaneous" msgstr "ক্ষণস্থায়ী" # ##ক্ষণিক #: standalone/net_monitor:102 #, c-format msgid "Average" msgstr "মোটামুটি" #: standalone/net_monitor:103 #, c-format msgid "" "Sending\n" "speed:" msgstr "" "প্রদানের\n" "গতি" #: standalone/net_monitor:104 #, c-format msgid "" "Receiving\n" "speed:" msgstr "" "আদানের\n" "গতি" #: standalone/net_monitor:108 #, c-format msgid "" "Connection\n" "time: " msgstr "" "সংযোগ\n" "সময়:" #: standalone/net_monitor:115 #, c-format msgid "Use same scale for received and transmitted" msgstr "গ্রহণ এবং পরিবহনের জন্য একই স্কেল ব্যবহার করুন" #: standalone/net_monitor:134 #, c-format msgid "Wait please, testing your connection..." msgstr "অনুগ্রহ করে অপেক্ষা করুন, আপনার সংযোগ পরীক্ষা করা হচ্ছে..." #: standalone/net_monitor:183 standalone/net_monitor:196 #, c-format msgid "Disconnecting from Internet " msgstr "ইন্টারনেট থেকে বিচ্ছন্ন করা হচ্ছে" #: standalone/net_monitor:183 standalone/net_monitor:196 #, c-format msgid "Connecting to Internet " msgstr "ইন্টারনেটে সংযোগ" #: standalone/net_monitor:227 #, c-format msgid "Disconnection from Internet failed." msgstr "ইন্টরনেট থেকে বিচ্ছন্ন করা যায়নি।" #: standalone/net_monitor:228 #, c-format msgid "Disconnection from Internet complete." msgstr "ইন্টারনেট থেকে বিচ্ছিন্ন করা হয়েছে।" #: standalone/net_monitor:230 #, c-format msgid "Connection complete." msgstr "সংযোগ সম্পন্ন হয়েছে।" #: standalone/net_monitor:231 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandriva Linux Control Center." msgstr "" "কানেকশন হয়নি।\n" "ম্যান্ড্রিব -লিনাক্স কন্ট্রোল প্যানেলে আপনার কনফিগারেশন যাচাই করুন।" #: standalone/net_monitor:336 #, c-format msgid "Color configuration" msgstr "কালার কনফিগারেশন" #: standalone/net_monitor:384 standalone/net_monitor:404 #, c-format msgid "sent: " msgstr "প্রেরণ করা হয়েছে:" #: standalone/net_monitor:391 standalone/net_monitor:408 #, c-format msgid "received: " msgstr "গ্রহণ করা হয়েছে:" #: standalone/net_monitor:398 #, c-format msgid "average" msgstr "মোটামুটি" #: standalone/net_monitor:401 #, c-format msgid "Local measure" msgstr "স্থানীয় পরিমাপ" #: standalone/net_monitor:462 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "ঘোষনা, আরেকটি ইন্টারনেট সংযোগ সনাক্ত হয়েছে, হয়তোবা আপনার নেটওয়ার্ক ব্যবহার করছে" #: standalone/net_monitor:473 #, c-format msgid "No internet connection configured" msgstr "ইন্টরনেট সংযোগ কনফিগার করা নেই" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "ইনস্টলকৃত প্রিন্টারসমূহের ডাটা পড়া হচ্ছে..." #: standalone/printerdrake:116 #, c-format msgid "%s Printer Management Tool" msgstr "%s প্রিন্টার মে" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/কাজ (_জ)" #: standalone/printerdrake:130 standalone/printerdrake:142 #, c-format msgid "/_Add Printer" msgstr "/ প্রিন্টার যোগ করো (_য)" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/সাধারণ হিসেবে সংরক্ষণ করো (_স)" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/এডিট (_এ)" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/মুছো (_ম)" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/দক্ষ মুড (_দ)" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/রিফ্রেশ (_র)" #: standalone/printerdrake:146 #, c-format msgid "/_Configure CUPS" msgstr "/CUPS কনফিগার (_ক)" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "খোঁজ:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "ফিল্টার প্রয়োগ করো" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "বিবরণ" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Printer Name" msgstr "প্রিন্টারের নাম" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "কানেকশনের ধরন" #: standalone/printerdrake:218 #, c-format msgid "Server Name" msgstr "সার্ভারের নাম" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, c-format msgid "Add Printer" msgstr "প্রিন্টার যোগ করো" #: standalone/printerdrake:226 #, c-format msgid "Add a new printer to the system" msgstr "সিস্টেমে একটি নতুন প্রিন্টার যোগ করো" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, c-format msgid "Set as default" msgstr "সাধারণ হিসেবে সংরক্ষণ করো" #: standalone/printerdrake:229 #, c-format msgid "Set selected printer as the default printer" msgstr "নির্বাচিত প্রিন্টারটিকে স্বাভাবিক প্রিন্টার হিসেবে সেট করো" #: standalone/printerdrake:232 #, c-format msgid "Edit selected printer" msgstr "নির্বাচিত প্রিন্টার এডিট করো" #: standalone/printerdrake:235 #, c-format msgid "Delete selected printer" msgstr "নির্বাচিত প্রিন্টার মুছে ফেলো" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "লিষ্টটি রিফ্রেশ করো" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS" msgstr "CPUS কনফিগার করো" #: standalone/printerdrake:241 #, c-format msgid "Configure CUPS printing system" msgstr "CPUS প্রিন্টিং সিস্টেম কনফিগার করো" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "সক্রিয়" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "নিষ্ক্রিয়" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "লেখকসমূহ:" # sam: printer? #. -PO: here %s is the version number #: standalone/printerdrake:570 #, c-format msgid "Printer Management %s" msgstr "%s প্রিন্টার ব্যবস্থাপনা" #: standalone/scannerdrake:51 #, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "" "স্কেনার ব্যবহার করার জন্য SANE প্যাকেজগুলি ইনস্টল করতে হবে।\n" "\n" "আপনি কি SANE প্যাকেজ ইনস্টল করতে চান?" #: standalone/scannerdrake:55 #, c-format msgid "Aborting Scannerdrake." msgstr "Scannerdrake থেকে বের হচ্ছি।" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" "Scannerdrake-এর মাধ্যমে একটি স্কেনারকে সেটআপ করার জন্য যেসব প্যাকেজ প্রয়োজন তা " "ইনস্টল করা যায়নি।" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "Scannerdrake এখন চালু হবেনা।" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "কনফিগার করা স্কেনারগুলি খোঁজা হচ্ছে ..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "নতুন স্কেনারের জন্য খোঁজ চলছে ..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "ফনফিগার করা স্কেনারগুলির লিষ্ট পুনরায় তৈরী করা হচ্ছে ..." #: standalone/scannerdrake:101 #, c-format msgid "The %s is not supported by this version of %s." msgstr "%s-টি এই ভার্সনের %s-এ সাপোর্ট করেনা।" #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s-কে %s-এ পাওয়া গ্যাছে, সয়ংক্রিয়ভাবে কনফিগার করবো?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s স্কেনার ডাটাবেইজে নেই, মেনুয়ালি কনফিগার করবেন?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "স্কেনারের মডেল সিলেক্স করুন" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "সনাক্তকৃত মডেল: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "পোর্ট: %s" # সাম #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr " (সাপোর্ট করা হয় না)" # সাম #: standalone/scannerdrake:144 #, c-format msgid "The %s is not supported under Linux." msgstr "%s টি লিনাক্স সাপোর্ট করেনা।" #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "ফার্মওয়্যার ফাইল ইনস্টল করবেনা" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "হয়তো আপনার %s-এর ফার্মওয়্যার প্রতিবার চালু করার সময় আপলোড করতে হবে।" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "তাই যদি হয়, আপনি এটাকে সয়ংক্রিয়ভাবে করাতে পারেন।" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" "আপনাকে আপনার স্কেনারের জন্য ফার্মওয়্যার ফাইলটি সরবরাহ করতে হবে যাতেকরে এটাকে " "ইনস্টল করা যায়।" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" "এই ফাইলটি আপনি স্কেনারের সাথে আসা সিডি অথবে ফ্লপি, অথবা পস্তুতকারাকের ওয়েব সাইট " "থেকে, অথবা আপনার উইন্ডোজ পার্টিশন থেকে পেতে পারেন।" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "এখান থেকে ফার্মওয়্যার ফাইল ইনস্টল করো" #: standalone/scannerdrake:200 #, c-format msgid "Select firmware file" msgstr "ফার্মওয়্যার ফাইল সিলেক্ট করুন" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "%s ফার্মওয়্যার ফাইলটি উপস্থিত নেই অথবা পড়া যাচ্ছেনা!" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "হয়তো আপনার স্কেনারগুলির ফার্মওয়্যার প্রতিবার চালু করার সময় আপলোড করতে হবে।" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" "আপনাকে আপনার স্কেনারের জন্য ফার্মওয়্যার ফাইলটগুলি সরবরাহ করতে হবে যাতেকরে এটাকে " "ইনস্টল করা যায়।" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" "যদি আপনি এর মধ্যে আপনার স্কেনারের ফার্মওয়্যার ইনস্টল করে থাকেন তাহলে আপনি নতুন " "একটি ফার্মওয়্যার ফাইল সরবরাহ করে তা আপডেট করতে পারেন।" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "-এর জন্য ফার্মওয়্যার ইনস্টল করো" #: standalone/scannerdrake:258 #, c-format msgid "Select firmware file for the %s" msgstr "%s-এর জন্য একটি ফার্মওয়্যার ফাইল নির্বাচন করুন" #: standalone/scannerdrake:276 #, c-format msgid "Could not install the firmware file for the %s!" msgstr "%s-এর ফার্মওয়্যার ফাইলটি ইনস্টল করা সম্ভব হলোনা!" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "%s-এর ফার্মওয়্যার ফাইলটি সুষ্ঠভাবে ইনস্টল হয়েছে।" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "%s সাপোর্ট করেনা" #: standalone/scannerdrake:304 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "Printerdrake-এর মাধ্যমে অবশ্যই %s কনফিগার করতে হবে।\n" "আপনি %s কন্ট্রোল সেন্টারের হার্ডওয়্যার সেকশন থেকে printerdrake চালাতে পারেন।" #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "সয়ংক্রিয়ভাবে বরাদ্দকৃত পোর্টসমূহ সনাক্ত করো" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "আপনি একটি ডিভাইস নির্বাচন করুন যেখানে আপনার %s সংযুক্ত আছে" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(নির্দেশ: প্যারালাল পোর্টগুলি সয়ংক্রিয়ভাবে সনাক্ত হবেনা)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "ডিভাইস পছন্দ করো" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "স্কেনারের খোঁজ করা হচ্ছে..." # সাম #: standalone/scannerdrake:383 #, c-format msgid "Setting up kernel modules..." msgstr "কার্নেল মডিউল সেট আপ করছি..." # সাম #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, c-format msgid "Attention!" msgstr "দৃষ্টি আকর্ষণ!" # সাম #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" "আপনার %s সম্পুর্ন স্বয়ংক্রিয়ভাবে কনফিগার করা যাবে না।\n" "\n" "নিজ হাতে বিন্যস্ত করা প্রয়োজন। অনুগ্রহ করে /etc/sane.d/%s.conf কনফিগারেশন ফইলটি " "সম্পাদন করুন। " # সাম #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" "ড্রইভারের সহায়িকাতে আরও তথ্য পাওয়া যাবে। পড়ার জন্য \"man sane-%s\" কমান্ডটি " "চালান।" # সাম: # documents = কাগজপত্র? #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "এরপর আপনি এপ্লিকেশন মেনুর মাল্টিমিডিয়া/গ্রাফিক্স থেকে \"XSane\" অথবা \"Kooka\" " "ব্যবহার করে আপনার কাগজপত্র স্ক্যান করতে পারেন।" # সাম #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" "আপনার %s কনফিগার করা হয়েছে। কিন্তু এটিকে কাজ করাতে কিছু অংশ নিজ হাতে বিন্যস্ত করা " "প্রয়োজন হতে পারে। " #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" "যদি এটি Scannerdrake মূল উইন্ডোতে, কনফিগারকৃত স্ক্যানারের তালিকায় না থাকে বা যদি " "ঠিক মত কাজ না করে, " # সাম #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "/etc/sane.d/%s.conf কনফিগারেশন ফাইলটি সম্পাদন করুন।" #: standalone/scannerdrake:406 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "আপনার %s কনফিগার করা হয়েছে।\n" "আপনি এপ্লিকেশন মেনুর মাল্টিমিডিয়া/গ্রাফিক্স থেকে \"XSane\" অথবা \"Kooka\" ব্যবহার " "করে স্কেন করতে পারেন।" #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "এই স্কেনারগুলি\n" "\n" "%s\n" "আপনার সিস্টেমে উপলব্ধ রয়েছে।\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "এই স্কেনারটি\n" "\n" "%s\n" "আপনার সিস্টেমে উপলব্ধ রয়েছে।\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "আপনার সিস্টেমে উপলব্ধ কোন স্কেনার এখানে পাওয়া যায়নি।\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "নতুন স্কেনারসমূহের খোঁজ করো" # Manually -এর বাংলা মনে নেই ;) #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "মেনুয়ালি একটি স্কেনার যোগ করুন" #: standalone/scannerdrake:465 #, c-format msgid "Install/Update firmware files" msgstr "Firmware ফাইলসমূহ ইনস্টল/আপগ্রেড করো" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "স্কেনার শেয়ারিং" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "দূরবর্ত সমস্থ মেশিনসমূহ" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "এই মেশিনে" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "এই মেশিনের সাথে সংযুক্ত স্কেনারগুলি দূরবর্তী কোন মেশিন বা দূরবর্তী কোন মেশিনের " "মাধ্যমে ব্যবহার করা যাবে, আপনি তা এখানে পছন্দ করতে পারেন।" #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "আপনি এখানে সিদ্ধান্তু নিতে পারেন যে দূরবর্তী কোন কম্পিউটারগুলির স্কেনার এখানে বরাদ্দ " "থাকবে।" #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "এই মেশিনের স্কেনারগুলি অন্য কম্পিউটারে বরাদ্দ থাকবে" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "যেই হোস্টগুলিতে স্কেনার শেয়ার হবে:" #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "রিমোট কম্পিউটারের স্কেনার ব্যবহার করো" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "এই হোস্টসমূহের স্কেনারগুলি ব্যাবহার করো:" #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "লোকাল স্কেনারের শেয়ারিং" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "এগুলি সেই মেশিন যেগুলিতে লোকাল ভাবে সংযুক্ত স্কেনার(গুলি) বরাদ্দ থাকবে:" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "হোস্ট যোগ করো" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "নির্বাচিত হোস্ট এডিট করো" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "নির্বাচিত হোস্ট অপসরণ করো" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "হোস্টের নাম/IP এড্রেস:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "একটি লোকাল হোস্ট পছন্দ করুন যেখানে স্কেনারগুলি বরাদ্দ থাকবে:" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "আপনাকে অবশ্যই একটি হোস্টের নাম অথবা IP ঠিকানা প্রবেশ করাতে হবে।\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "লিষ্টে এই হোস্ট আগে থেকেই আছে, এটা আবার যোগ করা যাবেনা।\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "দূরবর্তী স্কেনারসমূহের ব্যাবহার" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "এগুলিই সেই সমস্থ মেশিন যেগুলি থেকে স্কেনার ব্যবহার করা যাবে:" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "স্থানীয় স্ক্যানার(গুলো) শেয়ার করার জন্য saned প্যাকেজটি ইনস্টল করতে হবে।\n" "\n" "আপনি কি saned প্যাকেজটি ইনস্টল করতে চান?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "আপনার স্কেনার(গুলি) নেটওয়ার্কে বরাদ্দ থাকবে না।" #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "\"%s\" হার্ডওয়্যার শ্রেণীর কিছু ডিভাইস অপসরণ করা হয়েছে:\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "- %s অপসারিত হয়েছে\n" #: standalone/service_harddrake:108 #, c-format msgid "Some devices were added: %s\n" msgstr "কিছু ডিভাইস সমূহ যুক্ত করা হয়েছে: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "- %s যুক্ত করা হয়েছে\n" #: standalone/service_harddrake:206 #, c-format msgid "Hardware probing in progress" msgstr "হার্ডওয়্যারের অনুসন্ধান চলছে" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "\"%s\" শ্রেনীতে হার্ডওয়্যারের পরিবর্তন (জবাব দিতে %s সেকেন্ড সময় লেগেছে)" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "আপনি কি সঠিক কনফিগ টুল রান করাতে চান?" #: steps.pm:14 #, c-format msgid "Language" msgstr "ভাষা" #: steps.pm:15 #, c-format msgid "License" msgstr "লাইসেন্স" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "মাউস কনফিগার করো" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "হার্ড ড্রাইভ সনাক্ত" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "ইনস্টলেশনের শ্রেনী নির্বাচন করো" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "তোমার পছন্দের কি-বোর্ড নির্বাচন করো" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "পার্টিশন করা হচ্ছে" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "পার্টিশনসমূহ ফরম্যাট করো" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "ইনস্টলের জন্য প্যাকেজসমূহ পছন্দ করো" #: steps.pm:24 #, c-format msgid "Install system" msgstr "সিস্টেম ইনস্টল" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "অ্যাডমিনস্ট্রেটর পাসওয়ার্ড" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "একটি ইউজার যোগ করো" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "নেটওয়ার্কিং কনফিগার" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "বুটলোডার ইনস্টল" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "X কনফিগার" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "সার্ভিসমূহ কনফিগার" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "আপডেটসমূহ ইনস্টল" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "ইনস্টল থেকে বাহির" #: ugtk2.pm:908 #, c-format msgid "Is this correct?" msgstr "এটা কি সঠিক?" # সাম #: ugtk2.pm:968 #, c-format msgid "No file chosen" msgstr "কোন ফাইল বেছে নেয়া হয়নি" # সাম #: ugtk2.pm:970 #, c-format msgid "You have chosen a file, not a directory" msgstr "আপনি একটি ফাইল নির্বাচন করেছেন, ডিরেক্টরি নয়" # সাম #: ugtk2.pm:972 #, c-format msgid "You have chosen a directory, not a file" msgstr "আপনি একটি ডিরেক্টরি নির্বাচন করেছেন, ফাইল নয়" # সাম #: ugtk2.pm:974 #, c-format msgid "No such directory" msgstr "এই নামে কোন ডিরেক্টরি নেই" # সাম #: ugtk2.pm:974 #, c-format msgid "No such file" msgstr "এই নামে কোন ফাইল নেই" #: ugtk2.pm:1055 #, c-format msgid "Expand Tree" msgstr "ট্রী প্রসারিত করো" #: ugtk2.pm:1056 #, c-format msgid "Collapse Tree" msgstr "ট্রী সংকীর্ন করো" #: ugtk2.pm:1057 #, c-format msgid "Toggle between flat and group sorted" msgstr "ফ্ল্যাট এবং গ্রুপের শ্রেণীর মধ্যে পরিবর্তন করো" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s ইনস্টল হয়নি\n" "ইনস্টল করার জন্য \"পরবর্তি\" অথবা বাতিল করতে \"বাতিল\" ক্লিক করুন" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "ইনস্টলেশন ব্যর্থ হয়েছে" #~ msgid "Grub" #~ msgstr "Grub" # ##msgstr "স্থানীয় নেটওয়ার্ক ঠিকানা" #~ msgid "Local Network adress" #~ msgstr "স্থানীয় নেটওয়ার্ক অ্যাড্রেস" #~ msgid "Configuring scripts, installing software, starting servers..." #~ msgstr "স্ক্রীপ্ট কন্‌ফিগার হচ্ছে, সফটওয়্যার ইনস্টল হচ্ছে, সার্ভার চালু হচ্ছে..." #~ msgid "drakfloppy" #~ msgstr "ড্রেকফ্লপি" #~ msgid "Boot disk creation" #~ msgstr "বুট ডিস্ক তৈরি" #~ msgid "General" #~ msgstr "সাধারণ" #~ msgid "Kernel version" #~ msgstr "কার্ণেল সংস্করণ" #~ msgid "Preferences" #~ msgstr "পছন্দ" #~ msgid "Advanced preferences" #~ msgstr "অগ্রসর পছন্দ" #~ msgid "Size" #~ msgstr "আকার" #~ msgid "Mkinitrd optional arguments" #~ msgstr "Mkinitrd'র ঐচ্ছিক আর্গুমেন্ট" #~ msgid "force" #~ msgstr "জোরপূর্বক" #~ msgid "omit raid modules" #~ msgstr "রেইড (RAID) মডিউল বাদ দাও" #~ msgid "if needed" #~ msgstr "যদি প্রয়োজন হয়" #~ msgid "omit scsi modules" #~ msgstr "SCSI মডিউল বাদ দাও" #~ msgid "Add a module" #~ msgstr "একটি মডিউল সংযুক্ত করুন" #~ msgid "Remove a module" #~ msgstr "একটি মডিউল সরিয়ে ফেলুন" #~ msgid "Be sure a media is present for the device %s" #~ msgstr "নিশ্চিত হোন যে ডিভাইস %s এর জন্য কোন মিডিয়া উপস্থিত আছে" #~ msgid "" #~ "There is no medium or it is write-protected for device %s.\n" #~ "Please insert one." #~ msgstr "" #~ "%s ডিভাইসের জন্য কোন মিডিয়াম নেই অথবা তার লেখার অনুমতি নেই।\n" #~ "অনুগ্রহ করে একটি প্রবেশ করান।" #~ msgid "Unable to fork: %s" #~ msgstr "ফর্ক করতে ব্যর্থ: %s" #~ msgid "Floppy creation completed" #~ msgstr "ফ্লপি তৈরি সম্পন্ন হয়েছে" #~ msgid "The creation of the boot floppy has been successfully completed \n" #~ msgstr "বুট ফ্লপি তৈরি সফলভাবে সম্পন্ন হয়েছে \n" #~ msgid "" #~ "Unable to properly close mkbootdisk:\n" #~ "\n" #~ "%s" #~ msgstr "" #~ "mkbootdisk সঠিকভাবে বন্ধ করতে ব্যর্থ:\n" #~ "\n" #~ "%s" #~ msgid "You can not use a LVM Logical Volume for mount point %s" #~ msgstr "আপনি LVM লজিকাল ভলিউমকে %s মাউন্ট পয়েন্ট হিসেবে ব্যবহার করতে পারবেননা" #~ msgid "" #~ "You've selected a LVM Logical Volume as root (/).\n" #~ "The bootloader is not able to handle this without a /boot partition.\n" #~ "Please be sure to add a /boot partition" #~ msgstr "" #~ "আপনি একটি সফ্টওয়্যার LVM লজিকাল ভলিউমকে রুট (/) হিসেবে নির্বাচন করেছেন।\n" #~ "/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n" #~ "অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন" #~ msgid "" #~ "You may not be able to install lilo (since lilo does not handle a LV on " #~ "multiple PVs)" #~ msgstr "" #~ "আপনি lilo ইনস্টল করতে সক্ষম হবেন না (যতক্ষন পর্যন্ত lilo অনেকগুলো PV'তে একটি " #~ "LV'কে ব্যবহার করতে পারবে না)" #~ msgid "use PPPoE" #~ msgstr "PPPoE ব্যবহার করো" #~ msgid "use PPTP" #~ msgstr "PPTP ব্যবহার করো" #~ msgid "use DHCP" #~ msgstr "DHCP ব্যবহার করো" #~ msgid "Alcatel Speedtouch USB" #~ msgstr "অ্যালকাটেল স্পিডটাচ ইউএসবি" #~ msgid " - detected" #~ msgstr "- সনাক্ত হয়েছে" #~ msgid "Sagem (using PPPoA) USB" #~ msgstr "সাজেম (PPPoA ব্যবহার করে) ইউএসবি" #~ msgid "Sagem (using DHCP) USB" #~ msgstr "সাজেম (DHCP ব্যবহার করে) ইউএসবি" #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ইত্যাদী" # FIXME #~ msgid "" #~ "Warning, another Internet connection has been detected, maybe using your " #~ "network" #~ msgstr "" #~ "সতর্কবাণী, অপর একটি ইন্টারনেট সংযোগ সনাক্ত করা গিয়েছে, যা সম্ভবত অপানার " #~ "নেটওয়ার্ক ব্যবহার করছে" #~ msgid "PXE Server Configuration" #~ msgstr "PXE সার্ভার কন্‌ফিগারেশন" #~ msgid "Installation Server Configuration" #~ msgstr "সার্ভার কন্‌ফিগারেশন ইনস্টলেশন" #~ msgid "" #~ "You are about to configure your computer to install a PXE server as a " #~ "DHCP server\n" #~ "and a TFTP server to build an installation server.\n" #~ "With that feature, other computers on your local network will be " #~ "installable using this computer as source.\n" #~ "\n" #~ "Make sure you have configured your Network/Internet access using " #~ "drakconnect before going any further.\n" #~ "\n" #~ "Note: you need a dedicated Network Adapter to set up a Local Area Network " #~ "(LAN)." #~ msgstr "" #~ "আপনি আপনার কম্পিউটারে DHCP সার্ভার হিসেবে PXE সার্ভার এবং ইনস্টলেশন সার্ভার " #~ "তৈরি করতে TFTP\n" #~ "সার্ভার ইনস্টল করতে কন্‌ফিগার প্রায় করে ফেলেছেন।\n" #~ "এই বৈশিষ্ট্যের কারণে, আপনার লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো এই " #~ "কম্পিউটারটিকে উত্‍স হিসেবে ব্যবহার করে ইনস্টলে সক্ষম হবে।\n" #~ "\n" #~ "পরবর্তী কোন কাজ করার আগে নিশ্চিত করুন যে drakconnect দিয়ে আপনার নেটওয়ার্ক/" #~ "ইন্টারনেটে প্রবেশ কন্‌ফিগার করেছেন।\n" #~ "\n" #~ "নোট: স্থানীয় এরিয়া নেটওয়ার্ক (LAN) করার জন্য আপনার একটি নেটওয়ার্ক এডাপ্টর " #~ "লাগবে।" #~ msgid "No network adapter on your system!" #~ msgstr "আপনার সিস্টেমে কোন নেটওয়ার্ক এডাপ্টর নেই!" #~ msgid "Choose the network interface" #~ msgstr "নেটওয়ার্ক ইন্টার্ফেস পছন্দ করুন" #~ msgid "" #~ "Please choose which network interface will be used for the dhcp server." #~ msgstr "" #~ "অনুগ্রহ করে dhcp সার্ভারের জন্য ব্যবহৃত হবে এমন নেটওয়ার্ক ইন্টাফেস পছন্দ করুন।" #~ msgid "Interface %s (on network %s)" #~ msgstr "ইন্টারফেস %s (নেটওয়ার্কে %s)" #~ msgid "" #~ "The DHCP server will allow other computer to boot using PXE in the given " #~ "range of address.\n" #~ "\n" #~ "The network address is %s using a netmask of %s.\n" #~ "\n" #~ msgstr "" #~ "DHCP সার্ভার অন্যান্য কম্পিউটারকে নির্দিষ্ট অ্যাড্রেস সীমার মধ্যে PXE ব্যবহার করে " #~ "বুট করার অনুমতি দেবে।\n" #~ "\n" #~ "%s নেটমাস্ক ব্যবহার করে নেটওয়ার্ক অ্যাড্রেস হচ্ছে %s.\n" #~ "\n" #~ msgid "The DHCP start ip" #~ msgstr "DHCP চালুর আই-পি" #~ msgid "The DHCP end ip" #~ msgstr "DHCP সমাপ্তির আই-পি" #~ msgid "" #~ "Please indicate where the installation image will be available.\n" #~ "\n" #~ "If you do not have an existing directory, please copy the CD or DVD " #~ "contents.\n" #~ "\n" #~ msgstr "" #~ "অনুগ্রহ করে দেখিয়ে দিন যে কোথায় ইনস্টলেশনের ইমেজ পাওয়া যাবে।\n" #~ "\n" #~ "যদি ইতিমধ্যে তৈরি কোন ডিরেক্টরি আপনার না থাকে, অনুগ্রহ করে সিডি বা ডিভিডি'র " #~ "কনটেন্ট কপি করুন।\n" #~ "\n" #~ msgid "Installation image directory" #~ msgstr "ইনস্টলেশন ইমেজ ডিরেক্টরি" #~ msgid "No image found" #~ msgstr "কোন ইমেজ পাওয়া যায়নি" #~ msgid "" #~ "No CD or DVD image found, please copy the installation program and rpm " #~ "files." #~ msgstr "" #~ "কোন সিডি বা ডিভিডি ইমেজ পাওয়া যায়নি, অনুগ্রহ করে ইনস্টলেশন প্রোগ্রাম এবং rpm " #~ "ফাইলগুলো কপি করুন।" #~ msgid "" #~ "Please indicate where the auto_install.cfg file is located.\n" #~ "\n" #~ "Leave it blank if you do not want to set up automatic installation mode.\n" #~ "\n" #~ msgstr "" #~ "অনুগ্রহ করে দেখিয়ে দিন যে কোথায় auto_install.cfg ফাইলটি আছে।\n" #~ "\n" #~ "আপনি যদি স্বয়ংক্রিয় ইনস্টলেশন মুড সেটআপ করতে না চান তাহলে এটিকে খালি রেখে " #~ "দিন।\n" #~ "\n" #~ msgid "Location of auto_install.cfg file" #~ msgstr "auto_install.cfg ফাইলের জায়গা" #~ msgid "Do it later" #~ msgstr "এটা পরে করো" #~ msgid "MdkKDM (Mandriva Linux Display Manager)" #~ msgstr "MdkKDM (ম্যান্ড্রিব লিনাক্স ডিসপ্লে ম্যানেজার)" #~ msgid "Internet Connection Sharing currently disabled" #~ msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি আপাতত নিষ্ক্রিয় করা আছে" #~ msgid "Enabling servers..." #~ msgstr "সার্ভার সক্রিয়করণ..." #~ msgid "Internet Connection Sharing currently enabled" #~ msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি বর্তমানে সক্রিয়" #~ msgid "Interface %s (using module %s)" #~ msgstr "ইন্টারফেস %s (%s মডিউল ব্যবহার করে)" #~ msgid "Interface %s" #~ msgstr "ইন্টারফেস %s" #~ msgid "Network interface" #~ msgstr "নেটওয়ার্ক ইন্টারফেস" #~ msgid "Network interface already configured" #~ msgstr "নেটওয়ার্ক ইন্টারফেস ইতিমধ্যে কন্‌ফিগার হয়ে গেছে" #~ msgid "" #~ "Warning, the network adapter (%s) is already configured.\n" #~ "\n" #~ "Do you want an automatic re-configuration?\n" #~ "\n" #~ "You can do it manually but you need to know what you're doing." #~ msgstr "" #~ "সাবধান, %s নেটওয়ার্ক এডাপ্টরটি ইতিমধ্যে কন্‌ফিগার হয়ে গেছে।\n" #~ "\n" #~ "আপনি কি এটি স্বয়ংক্রিয়ভাবে পুনরায় কন্‌ফিগার করতে চান?\n" #~ "\n" #~ "আপনি এটি নিজে নিজে করতে পারেন কিন্তু আপনাকে জানতে হবে যে আপনি কি করছেন।" #~ msgid "No (experts only)" #~ msgstr "না (শুধুমাত্র অভিজ্ঞরা)" #~ msgid "Show current interface configuration" #~ msgstr "বর্তমান ইন্টারফেস কন্‌ফিগারেশন দেখাও" #~ msgid "Current interface configuration" #~ msgstr "বর্তমান ইন্টারফেস কন্‌ফিগারেশন" #~ msgid "" #~ "Current configuration of `%s':\n" #~ "\n" #~ "Network: %s\n" #~ "IP address: %s\n" #~ "IP attribution: %s\n" #~ "Driver: %s" #~ msgstr "" #~ "`%s' এর বর্তমান কন্‌ফিগারেশন:\n" #~ "\n" #~ "নেটওয়ার্ক: %s\n" #~ "আইপি (IP) অ্যাড্রেস: %s\n" #~ "আইপি (IP) attribution: %s\n" #~ "ড্রাইভার: %s" #~ msgid "" #~ "I can keep your current configuration and assume you already set up a " #~ "DHCP server; in that case please verify I correctly read the Network that " #~ "you use for your local network; I will not reconfigure it and I will not " #~ "touch your DHCP server configuration.\n" #~ "\n" #~ "The default DNS entry is the Caching Nameserver configured on the " #~ "firewall. You can replace that with your ISP DNS IP, for example.\n" #~ "\t\t \n" #~ "Otherwise, I can reconfigure your interface and (re)configure a DHCP " #~ "server for you.\n" #~ "\n" #~ msgstr "" #~ "আমি আপনার বর্তমান কন্‌ফিগারেশন বজায় রাখতে পারি এবং আশা করছি আপনি ইতিমধ্যেই " #~ "একটি DHCP সার্ভার সেটআপ করেছেন; সেক্ষেত্রে অনুগ্রহ করে দেখে নিন যে আমি আপনার " #~ "ব্যবহৃত স্থানীয় নেটওয়ার্ক সঠিকভাবে পড়তে পারি কিনা; আমি এটা পুনরায় কন্‌ফিগার করব " #~ "না এবং আমি আপনার DHCP সার্ভার কন্‌ফিগারেশনে স্পর্শ করব না।\n" #~ "\n" #~ "ডিফল্ট DNS হচ্ছে Caching Nameserver যা ফায়ারওয়ালে (Firewall) কন্‌ফিগার করা " #~ "আছে। আপনি আপনি আপনার ISP DNP IP দিয়ে তা প্রতিস্থাপিত করতে পারেন, " #~ "উদাহরণস্বরুপ।\n" #~ "\t\t \n" #~ "অন্যথায়, আমি আপনার ইন্টারফেস পুনরায় কন্‌ফিগার করতে পারি এবং আপনার জন্য একটি " #~ "DHCP সার্ভার (পুনরায়)কন্‌ফিগার করতে পারি।\n" #~ "\n" #~ msgid "(This) DHCP Server IP" #~ msgstr "(এই) DHCP সার্ভার আই-পি(IP)" #~ msgid "Re-configure interface and DHCP server" #~ msgstr "ইন্টারফেস এবং DHCP সার্ভার পুনরায় কন্‌ফিগার করো" # #মুক্ত করছে নাকি হচ্ছে -----Fix me #~ msgid "The Local Network did not finish with `.0', bailing out." #~ msgstr "স্থানীয় নেটওয়ার্ক `.0' দিয়ে শেষ ছিল না, মুক্ত হচ্ছে।" #~ msgid "Number of logical extents: %d" #~ msgstr "লজিকাল ইভেন্টের সংখ্যা: %d" #~ msgid "" #~ "WARNING: this device has been previously configured to connect to the " #~ "Internet.\n" #~ "Modifying the fields below will override this configuration.\n" #~ "Do you really want to reconfigure this device?" #~ msgstr "" #~ "সতর্কীকরণ: এই যন্ত্রটি ইন্টারনেটের সংগে যুক্ত করার জন্য পূর্ববর্তীতে কন্‌ফিগার করা " #~ "হয়েছিল।\n" #~ "নিচের কোন ক্ষেত্রে পরিবর্তনের জন্য এই কন্‌ফিগারেশন বাতিল হয়ে যাবে।\n" #~ "আপনি কি আসলেই এই যন্ত্রটি পুনরায় কন্‌ফিগার করতে চান?" # সাম #~ msgid "" #~ " - Create etherboot floppies/CDs:\n" #~ " \tThe diskless client machines need either ROM images on the NIC, " #~ "or a boot floppy\n" #~ " \tor CD to initiate the boot sequence. drakTermServ will help " #~ "generate these\n" #~ " \timages, based on the NIC in the client machine.\n" #~ " \t\t\n" #~ " \tA basic example of creating a boot floppy for a 3Com 3c509 " #~ "manually:\n" #~ " \t\t\n" #~ " \tcat /usr/lib/etherboot/floppyload.bin \\\n" #~ " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" #~ " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" #~ msgstr "" #~ " - ইথারবুট ফ্লপি/CD তৈরী করুন:\n" #~ " \tডিস্কবিহীন ক্লায়েন্ট মেশিনগুলোতে বুট সিকোয়েন্স চালু করার জন্য NIC এর ROM " #~ "ইমেজ\n" #~ " \tবা বুট ফ্লপি প্রয়োজন। ক্লায়েন্ট মেশিনের NIC এর উপর ভিত্তি করে " #~ "drakTermServ\n" #~ " \tএই ইমেজ গুলো তৈরী করতে সাহায্য করবে।\n" #~ " \t\t\n" #~ " \tএকটি 3Com 3c509 এর জন্য নিজ হাতে বুট ফ্লপি তৈরী করার একটি সাধারন " #~ "উদাহরন:\n" #~ " \t\t\n" #~ " \tcat /usr/lib/etherboot/floppyload.bin \\\n" #~ " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" #~ " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0 " #~ msgid "Dynamic IP Address Pool:" #~ msgstr "ডাইনামিক আই-পি অ্যাড্রেস পুল:" #~ msgid "hd" #~ msgstr "hd" #~ msgid "tape" #~ msgstr "টেপ" #~ msgid "WebDAV remote site already in sync!" #~ msgstr "WebDAV এর রিমোট সাইট ইতিমধ্যেই sync এ আছে!" #~ msgid "WebDAV transfer failed!" #~ msgstr "WebDAV স্থানান্তর ব্যর্থ!" #~ msgid "" #~ "Backup quota exceeded!\n" #~ "%d MB used vs %d MB allocated." #~ msgstr "" #~ "ব্যাকআপ কোটা পেরিয়ে গেছে!\n" #~ "%d মেগাবাইট ব্যবহৃত বনাম %d মেগাবাইট বরাদ্দ।" #~ msgid "" #~ "Maximum size\n" #~ " allowed for Drakbackup (MB)" #~ msgstr "ড্রেকব্যাক-আপ-এর জন্য অনুমোদনকৃত সর্বোচ্চ আকার (মেগাবাইট)" #~ msgid "\t-Network by webdav.\n" #~ msgstr "\t-webdav-এর মাধ্যমে নেটওয়ার্ক।\n" #~ msgid "Use graphical boot" #~ msgstr "গ্রাফিকাল বুট পদ্ধতি ব্যবহার করো" #~ msgid "first step creation" #~ msgstr "প্রথম ধাপ তৈরি" #~ msgid "choose image file" #~ msgstr "ছবি পছন্দ করুন" #~ msgid "Browse" #~ msgstr "ব্রাউজ" #~ msgid "Configure bootsplash picture" #~ msgstr "bootsplash ছবি কন্‌ফিগার করো" #~ msgid "the color of the progress bar" #~ msgstr "প্রোগ্রেস বারের রং" #~ msgid "Preview" #~ msgstr "প্রিভিউ" #~ msgid "Choose color" #~ msgstr "রঙ পছন্দ করুন" #~ msgid "Make kernel message quiet by default" #~ msgstr "ডিফল্টভাবে কার্নেল বার্তা স্থির করুন" #~ msgid "Notice" #~ msgstr "নির্দেশ" #~ msgid "This theme does not yet have a bootsplash in %s!" #~ msgstr "%s এ এই থীমের কোন bootsplash নেই !" #~ msgid "You must choose an image file first!" #~ msgstr "আপনাকে অবশ্যই প্রথমে একটি ইমেজ ফাইল পছন্দ করতে হবে!" #~ msgid "Generating preview..." #~ msgstr "প্রিভিউ তৈরী করা হচ্ছে ..." #~ msgid "%s BootSplash (%s) preview" #~ msgstr "%s BootSplash (%s) প্রিভিউ" #~ msgid "" #~ "The image \"%s\" cannot be load due to the following issue:\n" #~ "\n" #~ "%s" #~ msgstr "" #~ "\"%s\" ছবিটি নিম্নলিখিত কারণে লোড করা যাচ্ছে না:\n" #~ "\n" #~ "%s" #~ msgid "No floppy drive available" #~ msgstr "কোন ফ্লপি ড্রাইভ উপস্থিত নেই" #~ msgid "Please insert the Update Modules floppy in drive %s" #~ msgstr "%s ড্রাইভে মডিউল আপডেটের ফ্লপি প্রবেশ করান" # sam #~ msgid "" #~ "_: keyboard\n" #~ "Tifinagh (+latin/arabic)" #~ msgstr "টিফিনাগ (‍‍+ল্যাটিন/আরবী)" #~ msgid "No network card" #~ msgstr "কোন নেটওয়ার্ক কার্ড নেই" #~ msgid "" #~ "The following protocols can be used to configure an ethernet connection. " #~ "Please choose the one you want to use" #~ msgstr "" #~ "ইথারনেট সংযুক্তি কন্‌ফিগার করার জন্য নিম্নলিখিত প্রোটোকল ব্যবহৃত হতে পারে। আপনি " #~ "যেটি ব্যবহার করতে চান অনুগ্রহ করে সেটি বেছে নিন" # সাম #~ msgid "Use already installed driver (%s)" #~ msgstr "পূর্বে ইনস্টলকৃত (%s) ড্রাইভার ব্যবহার করুন" # সাম #~ msgid "Use Wi-Fi Protected Access (WPA)" #~ msgstr "Wi-Fi সংরক্ষিত প্রবেশাধিকার (WPA) ব্যবহার করুন " #~ msgid "You've not selected any font" #~ msgstr "আপনি কোন ফন্ট বেছে নেন নি" #~ msgid "http://www.mandrivalinux.com/en/101errata.php3" #~ msgstr "http://www.mandrivalinux.com/en/101errata.php3"