# SOME DESCRIPTIVE TITLE.
# Copyright (C) 1999 Mandriva.
# Alexander Bokovoy <ab@avilink.net>, 2000
# Maryia Davidouskaia <maryia@scientist.com>, 2000
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2005-12-08 21:52+0800\n"
"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
"Language-Team: be\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Які тып пункта жадаеце дадаць?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr ""

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Паўтарыць"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Reboot"
msgstr "Перазагрузка"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)"

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Настройка IDE"

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)"

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:559
#: diskdrake/interactive.pm:564 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:217 install_any.pm:1775
#: install_any.pm:1827 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:838 network/netconnect.pm:867
#: network/netconnect.pm:966 network/netconnect.pm:970
#: network/netconnect.pm:974 network/netconnect.pm:979
#: network/netconnect.pm:1124 network/netconnect.pm:1128
#: network/netconnect.pm:1247 network/netconnect.pm:1252
#: network/netconnect.pm:1272 network/netconnect.pm:1431
#: network/thirdparty.pm:321 network/thirdparty.pm:328
#: network/thirdparty.pm:372 network/thirdparty.pm:374
#: network/thirdparty.pm:395 network/thirdparty.pm:419
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
#: printer/printerdrake.pm:4423 printer/printerdrake.pm:4451
#: printer/printerdrake.pm:4528 printer/printerdrake.pm:4594
#: printer/printerdrake.pm:4714 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1581 standalone/drakTermServ:1589
#: standalone/drakTermServ:1594 standalone/drakTermServ:1602
#: standalone/drakTermServ:1618 standalone/drakTermServ:1638
#: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:209 standalone/drakfont:222 standalone/drakfont:260
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:66 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Памылка"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Узнікла памылка, якую не атрымліваецца карэктна апрацаваць,\n"
"таму працягвайце на сваю рызыку."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Адбылася памылка"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Прагледзіць файлы сыстэмных часопісаў"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "Выберыце праграму для выкананьня"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1061 diskdrake/interactive.pm:1071
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Read carefully!"
msgstr "Чытайце ўважліва!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 Кб"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 Кб"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 Мб"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 Мб"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 Мб"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 Мб"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 Мб"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 Мб"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 Мб ці болей"

#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "X сэервер"

#: Xconfig/card.pm:163
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "X сэервер"

#: Xconfig/card.pm:195
#, fuzzy, c-format
msgid "Multi-head configuration"
msgstr "Канфігурацыя"

#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""

#: Xconfig/card.pm:265
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "Усталяванне пакету %s"

#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Пазначце памер відэапамяці"

#: Xconfig/card.pm:372
#, c-format
msgid "Xorg configuration"
msgstr "Настройка Xorg"

#: Xconfig/card.pm:374
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?"

#: Xconfig/card.pm:407
#, fuzzy, c-format
msgid "Configure all heads independently"
msgstr "Настроіць панэль"

#: Xconfig/card.pm:408
#, fuzzy, c-format
msgid "Use Xinerama extension"
msgstr "Пашырэнне файла"

#: Xconfig/card.pm:413
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Наладка вашага сэансу"

#: Xconfig/card.pm:425 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Сервер XFree86 %s"

#: Xconfig/card.pm:432 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s з падтрымкай 3D-паскарэння"

#: Xconfig/card.pm:434
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
"Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %s."

#: Xconfig/card.pm:440
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s з эксперыментальнай падтрымкай 3D-паскарэння"

#: Xconfig/card.pm:442
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %"
"s.\n"
"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n"
"ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:975
#, c-format
msgid "Custom"
msgstr "Па выбару"

#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1328
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4523 printer/printerdrake.pm:4987
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Выхад"

#: Xconfig/main.pm:129
#, fuzzy, c-format
msgid "Graphic Card"
msgstr "Відэакарта: %s"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Манітор"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Памеры экрану"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Тэст"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:493
#: standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Опцыі"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Ці жадаеце Вы захаваць змяненні?\n"
"Бягучая канфігурацыя:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "Абярыце манітор"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Абярыце манітор"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr ""

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Агульны"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, fuzzy, c-format
msgid "Vendor"
msgstr "Рэдактары"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Два крытычных параметры - гэта часціня вертыкальнай разгорткі, ці\n"
"часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n"
"часціня гарызантальнай сінхранізацыі разгорткі, ці часціня вываду\n"
"радкоў экрану.\n"
"\n"
"ВЕЛЬМІ ВАЖНА, каб абраны вамі манітор меў часціню сінхранізацыі, якая\n"
"не перавышае фактычныя магчымасці вашага манітору: у процілеглым выпадку\n"
"вы можаце сапсаваць манітор.\n"
"Калі вы сумняваецеся, абярыце кансерватыўныя настройкі."

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Часціня гарызантальный разгорткі"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Часціня вертыкальнай разгорткі"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 колераў (8 бітаў)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 тысячы колераў (15 бітаў)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 тысяч колераў (16 бітаў)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 мільёнаў колераў (24 біты)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Памеры экрану"

#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Іншыя"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Выбар памераў экрану і глыбіні колеру"

#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Відэакарта: %s"

#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:576 standalone/drakfont:586
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "Ок"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:431
#: install_steps_interactive.pm:836 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:586 standalone/drakfont:662 standalone/drakfont:739
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Адмена"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:511 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Дапамога"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Праверка параметраў настройкі"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Ці жадаеце пратэсціраваць настройкі?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d секундаў"

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "Гэта дакладна?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Тып клавіятуры: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Тып мышы: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Мыш: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Манітор: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Часціня гар.разг. манітору: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Часціня верт.разг. манітору: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Відэакарта: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Відэапамяць: %s Кб\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Параметры глыбіні колеру: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Памеры экрану: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Сервер Xorg: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Запуск X пры старце сістэмы"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Можна настроіць сістэму для аўтаматычнага запуску X пасля старту сістэмы.\n"
"Жадаеце, каб X стартаваў пры рэстарце?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr ""

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:474
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:208
#, c-format
msgid "Please wait"
msgstr "Калі ласка, пачакайце"

#: any.pm:142
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "Усталяванне загрузчыку"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнікла наступная памылка:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Першы сектар прылады (MBR)"

#: any.pm:232
#, fuzzy, c-format
msgid "First sector of the root partition"
msgstr "Першы сектар загрузачнага раздзелу"

#: any.pm:234
#, fuzzy, c-format
msgid "On Floppy"
msgstr "Захаванне на дыскету"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "Прапусціць"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Усталяванне LILO/GRUB"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"

#: any.pm:267 standalone/drakboot:269
#, fuzzy, c-format
msgid "Boot Style Configuration"
msgstr "Настройка IDE"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Галоўныя опцыі пачатковага загрузчыку"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Пазначце памер RAM у Мб"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Опцыя ‟Абмежаванне опцыяў каманднага радку“ не выкарыстоўваецца без пароля"

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Паролі не супадаюць"

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1335
#, c-format
msgid "Please try again"
msgstr "Паспрабуйце яшчэ раз"

#: any.pm:283 any.pm:308
#, fuzzy, c-format
msgid "Bootloader to use"
msgstr "Галоўныя опцыі пачатковага загрузчыку"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Загрузачная прылада"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Затрымка перад загрузкай вобразу па дамаўленню"

#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr ""

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr ""

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr ""

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Пароль"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Паўтарыце пароль"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "Абмежаванне опцыяў каманднага радка"

#: any.pm:296
#, c-format
msgid "restrict"
msgstr "абмежаванне"

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Ачышчаць /tmp пры кожнай загрузцы"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Пазначце дакладны памер RAM (знойдзена %d Мб)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr ""

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr ""

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""

#: any.pm:313
#, fuzzy, c-format
msgid "Enable CD Boot?"
msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне"

#: any.pm:314
#, fuzzy, c-format
msgid "Enable OF Boot?"
msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне"

#: any.pm:315
#, fuzzy, c-format
msgid "Default OS?"
msgstr "Па дамаўленню"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "Вобраз"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Далучыць"

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Відэа-рэжым"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:376
#, fuzzy, c-format
msgid "Network profile"
msgstr "Сеткавы інтэрфейс"

#: any.pm:385 any.pm:390 any.pm:392 diskdrake/interactive.pm:449
#, c-format
msgid "Label"
msgstr "Метка"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Па дамаўленню"

#: any.pm:394
#, fuzzy, c-format
msgid "Initrd-size"
msgstr "Initrd"

#: any.pm:396
#, fuzzy, c-format
msgid "NoVideo"
msgstr "Відэа"

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Пустая метка не дазваляецца"

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr ""

#: any.pm:408
#, fuzzy, c-format
msgid "You must specify a root partition"
msgstr "Першы сектар загрузачнага раздзелу"

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Гэтая метка ўжо выкарыстоўваецца"

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Які тып пункта жадаеце дадаць?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Іншая АС (SunOS,...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Іншая АС (MacOS,...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Іншая АС (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"У меню маюцца наступныя пункты.\n"
"Вы можаце дадаць яшчэ, альбо змяніць існуючыя."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr ""

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr ""

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr ""

#: any.pm:604
#, fuzzy, c-format
msgid "access to administrative files"
msgstr "Выкарыстоўваць настройкі сыстэмнага адміністратара"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr ""

#: any.pm:606
#, fuzzy, c-format
msgid "access to compilation tools"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(ужо дададзена %s)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Гэты пароль занадта просты"

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Калі ласка, увядзіце імя карыстальніку"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Імя карыстальніку павінна змяшчаць літары толькі на ніжнім рэгістры, \n"
"лічбы, ‛-’ і ‛_’"

#: any.pm:619
#, fuzzy, c-format
msgid "The user name is too long"
msgstr "Імя занадта доўгае"

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Гэта імя карыстальніку ўжо дададзена"

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID карыстальніка"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "ID групы"

#: any.pm:625
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "UIN павінен утрымліваць толькі лічбы.\n"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "Дадаць карыстальніка"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Увядзіце імя карыстальніку\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4987
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Зроблена"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Прыняць карыстальніка"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Уласнае імя"

#: any.pm:649 standalone/drakbackup:1634
#, fuzzy, c-format
msgid "Login name"
msgstr "Гульня ў косьці"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Абалонка:"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Піктаграма"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Аўтаматычны ўваход у сістэму"

#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""

#: any.pm:705
#, fuzzy, c-format
msgid "Use this feature"
msgstr "Зачыніць гэтую тэчку"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Абярыце асноўнага карыстальніка:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Абярыце мэнэджар вокнаў:"

#: any.pm:719 any.pm:787
#, fuzzy, c-format
msgid "Please choose a language to use."
msgstr "калі ласка, пазначце тып вашай мышы."

#: any.pm:720 any.pm:788
#, fuzzy, c-format
msgid "Language choice"
msgstr "Выбар мовы"

#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Вы можаце абраць іншыя мовы, якія будуць даступны пасля ўсталявання"

#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr ""

#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: any.pm:768 help.pm:647
#, fuzzy, c-format
msgid "All languages"
msgstr "Выбар мовы"

#: any.pm:842 help.pm:566 help.pm:855 install_steps_interactive.pm:957
#, fuzzy, c-format
msgid "Country / Region"
msgstr "Краіна - рэгіён і мова"

#: any.pm:844
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "калі ласка, пазначце тып вашай мышы."

#: any.pm:846
#, c-format
msgid "Here is the full list of available countries"
msgstr ""

#: any.pm:847
#, fuzzy, c-format
msgid "Other Countries"
msgstr "Парты вываду:"

#: any.pm:847 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Адмысловае"

#: any.pm:855
#, c-format
msgid "Input method:"
msgstr ""

#: any.pm:858 install_any.pm:422 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1238 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "Нічога"

#: any.pm:975
#, fuzzy, c-format
msgid "No sharing"
msgstr "Нічога"

#: any.pm:975
#, fuzzy, c-format
msgid "Allow all users"
msgstr "Дадаць карыстальніка"

#: any.pm:979
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: any.pm:991
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:994
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:1002
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""

#: any.pm:1027
#, c-format
msgid "Launch userdrake"
msgstr ""

#: any.pm:1027 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5305 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Зачыніць"

#: any.pm:1029
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Лякальны файл"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr ""

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr ""

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr ""

#: authentication.pm:27 authentication.pm:163
#, fuzzy, c-format
msgid "Windows Domain"
msgstr "Уласьцівасьці акна"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr ""

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr ""

#: authentication.pm:66
#, fuzzy, c-format
msgid "Local file:"
msgstr "Загрузіць файл(ы):"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr ":"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr ":"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:69
#, fuzzy, c-format
msgid "Windows Domain:"
msgstr "Уласьцівасьці акна:"

#: authentication.pm:69
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""

#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr ""

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr ""

#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""

#: authentication.pm:96
#, fuzzy, c-format
msgid "Authentication LDAP"
msgstr "Аўтэнтыфікацыя"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:98 share/compssUsers.pl:102
#, fuzzy, c-format
msgid "LDAP Server"
msgstr "Сервак"

#: authentication.pm:111 fsedit.pm:23
#, fuzzy, c-format
msgid "simple"
msgstr "Тэма"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""

#: authentication.pm:121 authentication.pm:159
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "Аўтэнтыфікацыя"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Маёнтак"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Сервак"

#: authentication.pm:125
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "База даньняў дыскаў"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:128
#, fuzzy, c-format
msgid "Password for user"
msgstr "Настроіць паролі"

#: authentication.pm:140
#, fuzzy, c-format
msgid "Authentication NIS"
msgstr "Аўтэнтыфікацыя"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "NIS Domain"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "NIS сэервер:"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:159
#, fuzzy, c-format
msgid "Authentication Windows Domain"
msgstr "Аўтэнтыфікацыя"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr ""

#: authentication.pm:164
#, fuzzy, c-format
msgid "Domain Admin User Name"
msgstr "Імя дамену"

#: authentication.pm:165
#, fuzzy, c-format
msgid "Domain Admin Password"
msgstr "Яшчэ раз пароль:"

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""

#: authentication.pm:182
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "Пароль для root"

#: authentication.pm:183 standalone/drakvpn:1111
#, fuzzy, c-format
msgid "Authentication method"
msgstr "Аўтэнтыфікацыя"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "Няма паролю"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)"

#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Аўтэнтыфікацыя"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""

#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr ""

#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr ""

#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr ""

#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr ""

#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "Не хапае дыскавай прасторы ў /boot"

#: bootloader.pm:1480
#, fuzzy, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"

#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1534
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Усталяванне загрузчыку"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "кб"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "Мб"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "Гб"

#: common.pm:139
#, c-format
msgid "TB"
msgstr ""

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d хвілін"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 хвіліна"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d секундаў"

#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr ""

#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Аўстрыя"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Аўстралія"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Бельгія"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Бразылія"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Канада"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Щвэйцарыя"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Коста-Рыка"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Чэская Рэспубліка"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Нямецкі"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Данія"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Курляндыя"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Гішпанія"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Фінляндыя"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Францыя"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Грэцыя"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Вугоршчына"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Ірляндыя"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Габрэйшчына"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Італія"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Японія"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Нідэрлянды"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Нарвэгія"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Новая Зэляндыя"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Польшча"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Партугалія"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Расея"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Швэцыя"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Словакія"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Тайланд"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Тайвань"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Паўднёвая Афрыка"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Злучаныя Штаты"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Новы"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:455 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Разманціраваць"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:452 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Манціраванне"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:678 diskdrake/interactive.pm:697
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Кропка манціравання"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr ""

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Паслужнік: "

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:522
#: diskdrake/interactive.pm:1217 diskdrake/interactive.pm:1295
#, c-format
msgid "Mount point: "
msgstr "Пункт манціравання:"

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1302
#, c-format
msgid "Options: %s"
msgstr "Опцыі: %s"

#: diskdrake/hd_gtk.pm:52 diskdrake/interactive.pm:292
#: diskdrake/smbnfs_gtk.pm:21 install_interactive.pm:62
#: install_interactive.pm:216 install_interactive.pm:222
#: install_interactive.pm:275 install_interactive.pm:280
#: install_steps_interactive.pm:278 install_steps_interactive.pm:342
#: steps.pm:21
#, fuzzy, c-format
msgid "Partitioning"
msgstr "Прынтэр"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Па-першае, зрабіце рэзервовую копію вашых дадзеных"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Калі вы плануеце выкарыстоўваць boot вобласць, тады размясціце яе\n"
" не далей за 2048 сектароў ад пачатку дыска"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Майстар стварэння"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Абярыце дзеянне"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Націсніце на раздзел"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr "Падрабязнасці"

#: diskdrake/hd_gtk.pm:251
#, fuzzy, c-format
msgid "No hard drives found"
msgstr "Вызначэнне жорсткага дыску"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr ""

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Вокны"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1232
#, c-format
msgid "Empty"
msgstr "Пуста"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Тыпы файлавых сістэмаў:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Выкарыстоўвайце ‟%s” замест"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:471
#, c-format
msgid "Create"
msgstr "Стварыць"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:624
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Тып"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:456
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Знішчыць"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Спачатку зрабіце ‟Unmount”"

#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose another partition"
msgstr "Стварэнне новага раздзелу"

#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose a partition"
msgstr "Абярыце дзеянне"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Выход"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Адкат"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Звычайны рэжым"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Рэжым эксперту"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Сапраўды працягваць?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Выйсці без захавання"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Выйсці без запісу табліцы раздзелаў"

#: diskdrake/interactive.pm:285
#, fuzzy, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Ці жадаеце пратэсціраваць настройкі?"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:342
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Каб мадыфікацыя табліцы раздзелаў здейснілася, патрэбна перазагрузка."

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Ачысціць усё"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Размеркаваць аўтаматычна"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, fuzzy, c-format
msgid "More"
msgstr "Перанос"

#: diskdrake/interactive.pm:317
#, fuzzy, c-format
msgid "Hard drive information"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Усе першасныя раздзелы выкарыстаны"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Дадаць раздзел немагчыма"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Каб зрабіць больш разделаў, выдаліце адзін і стварыце пашыраны раздзел "
"(extended)"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""

#: diskdrake/interactive.pm:368 help.pm:530
#, fuzzy, c-format
msgid "Save partition table"
msgstr "Дадатковая табліца раздзелаў"

#: diskdrake/interactive.pm:369 help.pm:530
#, fuzzy, c-format
msgid "Restore partition table"
msgstr "Дадатковая табліца раздзелаў"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Дадатковая табліца раздзелаў"

#: diskdrake/interactive.pm:372 help.pm:530
#, fuzzy, c-format
msgid "Reload partition table"
msgstr "Дадатковая табліца раздзелаў"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr ""

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Абярыце файл"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Табліца размяшчэння рэзервовага дыску мае іншы памер\n"
"Працягваць далей?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Паспрабуем выратаваць табліцу раздзелаў"

#: diskdrake/interactive.pm:434
#, fuzzy, c-format
msgid "Detailed information"
msgstr "Інфармацыя аб DMA"

#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:768
#, c-format
msgid "Resize"
msgstr "Змяненне памераў"

#: diskdrake/interactive.pm:451
#, c-format
msgid "Format"
msgstr "Фарматаванне"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to RAID"
msgstr "Дадаць да RAID"

#: diskdrake/interactive.pm:454
#, c-format
msgid "Add to LVM"
msgstr "Дадаць да LVM"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from RAID"
msgstr "Выдаліць з RAID"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Remove from LVM"
msgstr "Выдаліць з LVM"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Modify RAID"
msgstr "Змяніць RAID"

#: diskdrake/interactive.pm:460
#, c-format
msgid "Use for loopback"
msgstr "Выкарыстоўваць для віртуальнай файлавай сістэмы"

#: diskdrake/interactive.pm:515
#, c-format
msgid "Create a new partition"
msgstr "Стварэнне новага раздзелу"

#: diskdrake/interactive.pm:518
#, c-format
msgid "Start sector: "
msgstr "Пачатковы сектар:"

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:937
#, c-format
msgid "Size in MB: "
msgstr "Памер у Мб:"

#: diskdrake/interactive.pm:521 diskdrake/interactive.pm:938
#, c-format
msgid "Filesystem type: "
msgstr "Тып файлавай сістэмы:"

#: diskdrake/interactive.pm:526
#, c-format
msgid "Preference: "
msgstr "Параметры: "

#: diskdrake/interactive.pm:529
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "Гульня ў косьці"

#: diskdrake/interactive.pm:559
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: diskdrake/interactive.pm:589
#, fuzzy, c-format
msgid "Remove the loopback file?"
msgstr "/Выдаліць дохлыя файлы"

#: diskdrake/interactive.pm:608
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу"

#: diskdrake/interactive.pm:620
#, c-format
msgid "Change partition type"
msgstr "Змяніць тып раздзелу"

#: diskdrake/interactive.pm:621 diskdrake/removable.pm:47
#, fuzzy, c-format
msgid "Which filesystem do you want?"
msgstr "Які тып пункта жадаеце дадаць?"

#: diskdrake/interactive.pm:629
#, c-format
msgid "Switching from ext2 to ext3"
msgstr ""

#: diskdrake/interactive.pm:649
#, c-format
msgid "Which volume label?"
msgstr ""

#: diskdrake/interactive.pm:665
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Куды вы жадаеце манціраваць прыладу %s?"

#: diskdrake/interactive.pm:666
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Куды вы жадаеце манціраваць прыладу %s?"

#: diskdrake/interactive.pm:671
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Нельга ўсталяваць пункт манціравання, таму што раздел выкарыстоўваецца для\n"
"віртуальнай файлавай сістэмы.\n"
"Спачатку выдаліце віртуальную сістэму"

#: diskdrake/interactive.pm:696
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "Куды вы жадаеце манціраваць прыладу %s?"

#: diskdrake/interactive.pm:720 diskdrake/interactive.pm:799
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Змяненне памераў"

#: diskdrake/interactive.pm:720
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Падлік межаў файлавай сістэмы FAT"

#: diskdrake/interactive.pm:756
#, fuzzy, c-format
msgid "This partition is not resizeable"
msgstr "Памеры якога раздзела вы жадаеце змяніць?"

#: diskdrake/interactive.pm:761
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Усе дадзеныя ў гэтым раздзеле павінны быць зархіваваныя"

#: diskdrake/interactive.pm:763
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны"

#: diskdrake/interactive.pm:768
#, c-format
msgid "Choose the new size"
msgstr "Выбар новых памераў"

#: diskdrake/interactive.pm:769
#, fuzzy, c-format
msgid "New size in MB: "
msgstr "Памер у Мб:"

#: diskdrake/interactive.pm:810 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:851
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Абярыце існуючы RAID для дадання"

#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:870
#, c-format
msgid "new"
msgstr "новы"

#: diskdrake/interactive.pm:868
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Выбярыце існуючы LVM для дабаўлення"

#: diskdrake/interactive.pm:874
#, c-format
msgid "LVM name?"
msgstr ""

#: diskdrake/interactive.pm:902
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:904
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:922
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Гэты раздзел не можа быць выкарыстаны пад віртуальную файлавую сістэму"

#: diskdrake/interactive.pm:935
#, c-format
msgid "Loopback"
msgstr "Віртуальная файлавая сістэма (loopback)"

#: diskdrake/interactive.pm:936
#, c-format
msgid "Loopback file name: "
msgstr "Імя віртуальнага раздзелу"

#: diskdrake/interactive.pm:941
#, fuzzy, c-format
msgid "Give a file name"
msgstr "Уласнае імя"

#: diskdrake/interactive.pm:944
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""

#: diskdrake/interactive.pm:945
#, c-format
msgid "File already exists. Use it?"
msgstr "Файл ужо існуе. Выкарыстаць яго?"

#: diskdrake/interactive.pm:968
#, fuzzy, c-format
msgid "Mount options"
msgstr "Опцыі модулю:"

#: diskdrake/interactive.pm:975
#, fuzzy, c-format
msgid "Various"
msgstr "прылада"

#: diskdrake/interactive.pm:1043
#, c-format
msgid "device"
msgstr "прылада"

#: diskdrake/interactive.pm:1044
#, c-format
msgid "level"
msgstr "узровень"

#: diskdrake/interactive.pm:1045
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "памер блоку"

#: diskdrake/interactive.pm:1062
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Будзьце уважлівы. Гэтую аперацыю нельга адмяніць"

#: diskdrake/interactive.pm:1077
#, c-format
msgid "What type of partitioning?"
msgstr ""

#: diskdrake/interactive.pm:1115
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца"

#: diskdrake/interactive.pm:1124
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Табліца размяшчэння прылады %s будзе запісана на дыск!"

#: diskdrake/interactive.pm:1147
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання"

#: diskdrake/interactive.pm:1163
#, fuzzy, c-format
msgid "Move files to the new partition"
msgstr "Не хапае прасторы для стварэння новых раздзелаў"

#: diskdrake/interactive.pm:1163 standalone/draksambashare:81
#: standalone/draksambashare:144
#, fuzzy, c-format
msgid "Hide files"
msgstr "Загрузіць файл(ы)"

#: diskdrake/interactive.pm:1164
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: diskdrake/interactive.pm:1175
#, fuzzy, c-format
msgid "Moving files to the new partition"
msgstr "Не хапае прасторы для стварэння новых раздзелаў"

#: diskdrake/interactive.pm:1179
#, fuzzy, c-format
msgid "Copying %s"
msgstr "Копія:"

#: diskdrake/interactive.pm:1183
#, fuzzy, c-format
msgid "Removing %s"
msgstr "Памеры экрану: %s\n"

#: diskdrake/interactive.pm:1197
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: diskdrake/interactive.pm:1198
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""

#: diskdrake/interactive.pm:1218 diskdrake/interactive.pm:1280
#, c-format
msgid "Device: "
msgstr "Прылада:"

#: diskdrake/interactive.pm:1219
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "Імя машыны"

#: diskdrake/interactive.pm:1220
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1221
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Літара для DOS-дыску: %s (наўгад)\n"

#: diskdrake/interactive.pm:1225 diskdrake/interactive.pm:1234
#: diskdrake/interactive.pm:1298
#, c-format
msgid "Type: "
msgstr "Тып: "

#: diskdrake/interactive.pm:1229 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Імя: "

#: diskdrake/interactive.pm:1236
#, c-format
msgid "Start: sector %s\n"
msgstr "Пачатак: сектар %s\n"

#: diskdrake/interactive.pm:1237
#, c-format
msgid "Size: %s"
msgstr "Памер: %s"

#: diskdrake/interactive.pm:1239
#, c-format
msgid ", %s sectors"
msgstr ", %s сектараў"

#: diskdrake/interactive.pm:1241
#, c-format
msgid "Cylinder %d to %d\n"
msgstr ""

#: diskdrake/interactive.pm:1242
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1243
#, c-format
msgid "Formatted\n"
msgstr "Фарматаванне\n"

#: diskdrake/interactive.pm:1244
#, c-format
msgid "Not formatted\n"
msgstr "Не адфарматавана\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Mounted\n"
msgstr "Заманціравана\n"

#: diskdrake/interactive.pm:1246
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1251
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Імя файлу віртуальнай файлавай сістэмы: %s"

#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Загрузачны раздзел па дамаўленню\n"
"    (для загрузкі MS-DOS, а не для lilo)\n"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "Level %s\n"
msgstr "Узровень %s\n"

#: diskdrake/interactive.pm:1255
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "Памер фрагменту %s\n"

#: diskdrake/interactive.pm:1256
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-дыскі %s\n"

#: diskdrake/interactive.pm:1258
#, c-format
msgid "Loopback file name: %s"
msgstr "Імя файлу віртуальнай файлавай сістэмы: %s"

#: diskdrake/interactive.pm:1261
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""

#: diskdrake/interactive.pm:1264
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""

#: diskdrake/interactive.pm:1281
#, c-format
msgid "Read-only"
msgstr "Толькі для чытаньня"

#: diskdrake/interactive.pm:1282
#, c-format
msgid "Size: %s\n"
msgstr "Памер: %s\n"

#: diskdrake/interactive.pm:1283
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Геаметрыя: %s цыліндраў, %s галовак, %s сектараў\n"

#: diskdrake/interactive.pm:1284 network/thirdparty.pm:331
#, c-format
msgid "Info: "
msgstr "Інфармацыя: "

#: diskdrake/interactive.pm:1285
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-дыскі %s\n"

#: diskdrake/interactive.pm:1286
#, c-format
msgid "Partition table type: %s\n"
msgstr "Тып табліцы раздзелаў: %s\n"

#: diskdrake/interactive.pm:1287
#, c-format
msgid "on channel %d id %d\n"
msgstr ""

#: diskdrake/interactive.pm:1330
#, fuzzy, c-format
msgid "Filesystem encryption key"
msgstr "Тыпы файлавых сістэмаў:"

#: diskdrake/interactive.pm:1331
#, c-format
msgid "Choose your filesystem encryption key"
msgstr ""

#: diskdrake/interactive.pm:1334
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)"

#: diskdrake/interactive.pm:1335
#, fuzzy, c-format
msgid "The encryption keys do not match"
msgstr "Паролі не супадаюць"

#: diskdrake/interactive.pm:1338 network/netconnect.pm:1074
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr ""

#: diskdrake/interactive.pm:1339
#, c-format
msgid "Encryption key (again)"
msgstr ""

#: diskdrake/interactive.pm:1341 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr ""

#: diskdrake/removable.pm:46
#, fuzzy, c-format
msgid "Change type"
msgstr "Змяніць тып раздзелу"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, fuzzy, c-format
msgid "Domain Authentication Required"
msgstr "Аўтэнтыфікацыя"

#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Which username"
msgstr "Імя карыстальніку:"

#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Another one"
msgstr "Мэнэджэр файлаў"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "Карыстальнік"

#: diskdrake/smbnfs_gtk.pm:205
#, fuzzy, c-format
msgid "Search servers"
msgstr "Адшукаць файлы на дыску"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr ""

#: do_pkgs.pm:16 do_pkgs.pm:49
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, c-format
msgid "Could not install the %s package!"
msgstr ""

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""

#: do_pkgs.pm:35 harddrake/sound.pm:275 install_steps_interactive.pm:1313
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4307
#: printer/printerdrake.pm:5464 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Увага!"

#: do_pkgs.pm:35 standalone/harddrake2:527
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "Наступныя пакеты будуць даданы да сістэмы"

#: do_pkgs.pm:205
#, fuzzy, c-format
msgid "Installing packages..."
msgstr "Усталяванне пакету %s"

#: do_pkgs.pm:252
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Прагляд даступных пакетаў"

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "Фарматаванне раздзелу %s"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "Стварэнне і фарматаванне файла %s"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Не ведаю як адфарматаваць %s з тыпам %s"

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s памылка фарматавання %s"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Манціраванне дыску %s\n"

#: fs/mount.pm:74
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "Фарматаванне раздзелу %s"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: fs/mount.pm:80 fs/mount.pm:97
#, fuzzy, c-format
msgid "Checking %s"
msgstr "Праверка правапісу"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "памылка разманціравання %s: %s"

#: fs/mount.pm:142
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "Фарматаванне раздзелу %s"

#: fs/mount_options.pm:113
#, c-format
msgid "Use an encrypted file system"
msgstr ""

#: fs/mount_options.pm:115
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:117
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:123
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:129
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:133
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs/mount_options.pm:135
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs/mount_options.pm:139
#, c-format
msgid "Allow an ordinary user to mount the file system."
msgstr ""

#: fs/mount_options.pm:141
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Support user. extended attributes"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs/type.pm:363
#, fuzzy, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб"

#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr ""

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "сэервер"

#: fsedit.pm:218
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""

#: fsedit.pm:382
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Пункт манціравання павінен пачынацца з /"

#: fsedit.pm:383
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""

#: fsedit.pm:384
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Ужо ёсць раздзел з пунктам манціравання %s\n"

#: fsedit.pm:388
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""

#: fsedit.pm:394
#, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""

#: fsedit.pm:396
#, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы"

#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""

#: fsedit.pm:408
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""

#: fsedit.pm:469
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Не хапае прасторы для стварэння новых раздзелаў"

#: fsedit.pm:471
#, fuzzy, c-format
msgid "Nothing to do"
msgstr "Нічога"

#: harddrake/data.pm:62 install_any.pm:1710
#, c-format
msgid "Floppy"
msgstr "Гнуткі дыск"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr ""

#: harddrake/data.pm:88 install_any.pm:1711
#, c-format
msgid "Hard Disk"
msgstr "Жорскі дыск"

#: harddrake/data.pm:97 install_any.pm:1712
#, c-format
msgid "CDROM"
msgstr ""

#: harddrake/data.pm:107
#, fuzzy, c-format
msgid "CD/DVD burners"
msgstr "CDDB сервакі"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr ""

#: harddrake/data.pm:127 standalone/drakbackup:2055
#, fuzzy, c-format
msgid "Tape"
msgstr "Тып"

#: harddrake/data.pm:136
#, fuzzy, c-format
msgid "Videocard"
msgstr "Відэа"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr ""

#: harddrake/data.pm:163
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "Мульцімедыя"

#: harddrake/data.pm:172
#, fuzzy, c-format
msgid "Soundcard"
msgstr "Гук"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr ""

#: harddrake/data.pm:199
#, fuzzy, c-format
msgid "Processors"
msgstr "Працэсар"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr ""

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""

#: harddrake/data.pm:265
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "Іншае"

#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr "Мадэм"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Памяць"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr ""

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:989
#, c-format
msgid "Printer"
msgstr "Прынтэр"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Джойсьцік"

#: harddrake/data.pm:357
#, fuzzy, c-format
msgid "SATA controllers"
msgstr "Кіраванне"

#: harddrake/data.pm:366
#, fuzzy, c-format
msgid "RAID controllers"
msgstr "Кіраванне"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr ""

#: harddrake/data.pm:393
#, fuzzy, c-format
msgid "PCMCIA controllers"
msgstr "Кіраванне"

#: harddrake/data.pm:402
#, fuzzy, c-format
msgid "SCSI controllers"
msgstr "Кіраванне"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr ""

#: harddrake/data.pm:420
#, fuzzy, c-format
msgid "USB ports"
msgstr "USB прылады"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr ""

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:949 standalone/finish-install:37
#: standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Клавіятура"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:982
#, c-format
msgid "Mouse"
msgstr "Мыш"

#: harddrake/data.pm:485
#, fuzzy, c-format
msgid "UPS"
msgstr "HFS"

#: harddrake/data.pm:494
#, fuzzy, c-format
msgid "Scanner"
msgstr "Прайгравальнік дыскаў"

#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr ""

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr ""

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, fuzzy, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Праверка параметраў настройкі"

#: harddrake/sound.pm:229
#, fuzzy, c-format
msgid "No alternative driver"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: harddrake/sound.pm:230
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:236
#, fuzzy, c-format
msgid "Sound configuration"
msgstr "Настройка драйверу Sun"

#: harddrake/sound.pm:238
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:243
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:245
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:259 harddrake/sound.pm:347 standalone/drakups:146
#, fuzzy, c-format
msgid "Driver:"
msgstr "Прылада %d"

#: harddrake/sound.pm:267
#, fuzzy, c-format
msgid "Trouble shooting"
msgstr "Настройкі мышы"

#: harddrake/sound.pm:275
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:283
#, c-format
msgid "No open source driver"
msgstr ""

#: harddrake/sound.pm:284
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""

#: harddrake/sound.pm:287
#, c-format
msgid "No known driver"
msgstr ""

#: harddrake/sound.pm:288
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: harddrake/sound.pm:292 network/netconnect.pm:98 network/netconnect.pm:838
#, fuzzy, c-format
msgid "Unknown driver"
msgstr "Невядомая гукавая карта"

#: harddrake/sound.pm:293
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""

#: harddrake/sound.pm:307
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:310
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:336
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: harddrake/sound.pm:339
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:342
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, fuzzy, c-format
msgid "Auto-detect"
msgstr "Аўтаматычнае вызначэнне"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, fuzzy, c-format
msgid "Unknown|Generic"
msgstr "Агульны"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: harddrake/v4l.pm:407
#, fuzzy, c-format
msgid "Card model:"
msgstr "Рэжым прайгравання"

#: harddrake/v4l.pm:408
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "Тып мышы: %s\n"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:411
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "Настройкі шрыфтоў"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr ""

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr ""

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""

#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:740 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Прыняць"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Імя карыстальніку:"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:385 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Далей"

#: help.pm:51
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "Вы жадаеце выкарыстоўваць aboot?"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""

#: help.pm:146 share/compssUsers.pl:24
#, fuzzy, c-format
msgid "Workstation"
msgstr "Канфігурацыя"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Распрацоўка"

#: help.pm:146 share/compssUsers.pl:145
#, fuzzy, c-format
msgid "Graphical Environment"
msgstr "Абалонка"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:648
#, c-format
msgid "Individual package selection"
msgstr "Асабісты выбар пакетаў"

#: help.pm:146 help.pm:588
#, fuzzy, c-format
msgid "Upgrade"
msgstr "Аркады"

#: help.pm:146 install_steps_interactive.pm:606
#, c-format
msgid "With X"
msgstr ""

#: help.pm:146
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "Аўтэнтыфікацыя"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr ""

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:944
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "Не"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:944 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Так"

#: help.pm:180
#, fuzzy, c-format
msgid "Automatic dependencies"
msgstr "Аўтаматычнае вызначэнне"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Настройка"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:884
#, fuzzy, c-format
msgid "Hardware clock set to GMT"
msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?"

#: help.pm:217
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Аўтаматычнае вызначэнне"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Выкарыстоўваць незанятую прастору"

#: help.pm:374
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "Выкарыстоўваць існуючы раздзел"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"

#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr "Сцёрці дадзеныя на ўсім дыску"

#: help.pm:374
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "Выдаліць Windows™"

#: help.pm:374 install_interactive.pm:232
#, c-format
msgid "Custom disk partitioning"
msgstr ""

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""

#: help.pm:409
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "Стварэнне дыскеты для ўсталявання"

#: help.pm:409 install_steps_interactive.pm:1339
#, fuzzy, c-format
msgid "Replay"
msgstr "Граць"

#: help.pm:409 install_steps_interactive.pm:1339
#, c-format
msgid "Automated"
msgstr "Аўтаматычны"

#: help.pm:409 install_steps_interactive.pm:1342
#, fuzzy, c-format
msgid "Save packages selection"
msgstr "Асабісты выбар пакетаў"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "прылада"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "Усталёўка"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""

#: help.pm:458
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "Сістэмнае адміністраваньне"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""

#: help.pm:530
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "Звычайны рэжым"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, fuzzy, c-format
msgid "Espanol"
msgstr "Эсперанто:"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr ""

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, fuzzy, c-format
msgid "authentication"
msgstr "Аўтэнтыфікацыя"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr ""

#: help.pm:765
#, fuzzy, c-format
msgid "Expert"
msgstr "/Графік"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1016
#: install_steps_interactive.pm:1033
#, fuzzy, c-format
msgid "Sound card"
msgstr "Праграма гуказапісу"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:880
#: install_steps_interactive.pm:975 standalone/drakclock:100
#, fuzzy, c-format
msgid "Timezone"
msgstr "Тэма"

#: help.pm:855 install_steps_interactive.pm:1049
#, c-format
msgid "TV card"
msgstr ""

#: help.pm:855
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Унутраная ISDN карта"

#: help.pm:855
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "Запуск X пры старце сістэмы"

#: help.pm:855 install_any.pm:1733 install_steps_interactive.pm:1067
#: standalone/drakbackup:2040
#, c-format
msgid "Network"
msgstr "Сетка"

#: help.pm:855 install_steps_interactive.pm:1079
#, fuzzy, c-format
msgid "Proxies"
msgstr "Проксі"

#: help.pm:855 install_steps_interactive.pm:1090
#, c-format
msgid "Security Level"
msgstr "Узровень бясьпекі"

#: help.pm:855 install_steps_interactive.pm:1104 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr ""

#: help.pm:855 install_steps_interactive.pm:1120
#, fuzzy, c-format
msgid "Bootloader"
msgstr "Усталяванне загрузчыку"

#: help.pm:855 install_steps_interactive.pm:1133 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "Сэрвісы"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Далей ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- прылада"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr ""

#: install_any.pm:406
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "Ці ёсць у вас іншы?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:409
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "Ці ёсць у вас %s інтэрфейс?"

#: install_any.pm:422 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:422
#, fuzzy, c-format
msgid "Network (HTTP)"
msgstr "Сетка"

#: install_any.pm:422
#, fuzzy, c-format
msgid "Network (FTP)"
msgstr "Сетка"

#: install_any.pm:422
#, c-format
msgid "Network (NFS)"
msgstr ""

#: install_any.pm:452
#, c-format
msgid "Insert the CD 1 again"
msgstr ""

#: install_any.pm:478 network/netconnect.pm:867 standalone/drakbackup:114
#, fuzzy, c-format
msgid "No device found"
msgstr "Няма значкі"

#: install_any.pm:483
#, c-format
msgid "Insert the CD"
msgstr ""

#: install_any.pm:488
#, fuzzy, c-format
msgid "Unable to mount CD-ROM"
msgstr "Немагчыма адчыніць файл %s\n"

#: install_any.pm:521 install_any.pm:542
#, c-format
msgid "URL of the mirror?"
msgstr ""

#: install_any.pm:526
#, c-format
msgid "NFS setup"
msgstr ""

#: install_any.pm:526
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:527
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:527 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "Каталёг"

#: install_any.pm:580
#, fuzzy, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Не знойздены праграмы\n"

#: install_any.pm:657
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr ""

#: install_any.pm:699
#, fuzzy, c-format
msgid "Looking at packages already installed..."
msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны"

#: install_any.pm:703
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Пошук пакетаў для абнаўлення"

#: install_any.pm:781
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Змяніце ваш Cd-Rom!\n"
"Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок "
"пасля."

#: install_any.pm:793
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "Стварэньне меню ўжо запушчана"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:935
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:958
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: install_any.pm:1394 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "Памылка чытання файлу %s"

#: install_any.pm:1628
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "Наступныя пакеты будуць даданы да сістэмы"

#: install_any.pm:1630
#, c-format
msgid "%s (previously named as %s)"
msgstr ""

#: install_any.pm:1670
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Памылка: для стварэння новых файлавых сістэмаў не знайдзены адпаведныя \n"
"прылады. Праверце абсталяванне для пошуку імавернай прычыны."

#: install_any.pm:1714
#, c-format
msgid "HTTP"
msgstr ""

#: install_any.pm:1714
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1714
#, fuzzy, c-format
msgid "NFS"
msgstr "ФС"

#: install_any.pm:1737
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "Калі ласка выбярыце відарыс відэа"

#: install_any.pm:1753
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "Файл ужо йснуе. Перапісаць?"

#: install_any.pm:1757
#, c-format
msgid "Permission denied"
msgstr "Адмоўлена ў доступе"

#: install_any.pm:1806
#, fuzzy, c-format
msgid "Bad NFS name"
msgstr "Бяз назвы"

#: install_any.pm:1827
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "Загружаецца файл %s"

#: install_any.pm:1877
#, fuzzy, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Дадаць раздзел немагчыма"

#: install_any.pm:1884
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""

#: install_gtk.pm:136
#, fuzzy, c-format
msgid "System installation"
msgstr "Інфармацыя аб памяці"

#: install_gtk.pm:139
#, fuzzy, c-format
msgid "System configuration"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n"
"Часткова інфармацыю пра іх можна атрымаць тут: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Вы павінны мець каранёвы раздзел.\n"
"Для гэтага стварыце раздзел (альбо адзначце ўжо існуючы).\n"
"Потым абярыце ‟Кропка манціравання” і ўстанавіце яе ў ‛/’"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Няма раздзела swap.\n"
"\n"
"Усё адно працягваць?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr ""

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Не хапае прасторы для стварэння новых раздзелаў"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Выкарыстоўваць існуючы раздзел"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Няма існуючых раздзелаў, якія можна выкарыстаць"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Выкарыстоўваць раздзел Windows для віртуальнай файлавай сістэмы"

#: install_interactive.pm:117
#, fuzzy, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Памеры якога раздзела вы жадаеце змяніць?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Выбар памераў"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Каранёвы раздзел ў Мб: "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Памер swap раздзелу ў Мб:"

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Памеры якога раздзела вы жадаеце змяніць?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"У праграмы змены памераў раздзела FAT не атрымалася\n"
"апрацаваць Ваш раздзел, памылка: %s"

#: install_interactive.pm:156
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"Ваш раздзел з Windows занадта фрагментаваны. \n"
"Рэкамендуем спачатку запусціць праграму ‟defrag”"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Якую прастору захаваць для Windows?"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "Раздзел %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Вылічэнне межаў файлавай сістэмы Windows"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Выдаліць Windows™"

#: install_interactive.pm:213
#, fuzzy, c-format
msgid "Erase and use entire disk"
msgstr "Сцёрці дадзеныя на ўсім дыску"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "На які з маючыхся жорсткіх дыскаў Вы жадаеце ўсталяваць Linux?"

#: install_interactive.pm:221
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Усе існуючыя раздзелы на дыску %s і дадзеныя на іх будуць страчаны"

#: install_interactive.pm:236
#, c-format
msgid "Use fdisk"
msgstr "Выкарыстоўваць fdisk"

#: install_interactive.pm:239
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Вы можаце цяпер разбіць ваш дыск %s\n"
"Па заканчэнні не забудзьцеся захаваць змяненні, скарыстаўшы ‛w’"

#: install_interactive.pm:275
#, fuzzy, c-format
msgid "I can not find any room for installing"
msgstr "Дадаць раздзел немагчыма"

#: install_interactive.pm:279
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Майстар падрыхтоўкі раздзелаў DrakX знайшоў наступныя варыянты:"

#: install_interactive.pm:287
#, c-format
msgid "Partitioning failed: %s"
msgstr "Падрыхтоўка разделаў не ўдалася: %s"

#: install_interactive.pm:294
#, c-format
msgid "Bringing up the network"
msgstr "Далучэнне да сеткі"

#: install_interactive.pm:299
#, c-format
msgid "Bringing down the network"
msgstr "Адлучэнне ад сеткі"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "Дубляванне пункту манціравання %s"

#: install_steps.pm:481
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Некаторыя важныя пакеты не былі ўсталяваны карэктна.\n"
"Другі ваш cdrom дыск ці ваш cdrom маюць дэфекты.\n"
"Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl media/main/*.rpm"
"\"\n"

#: install_steps_auto_install.pm:68 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Пераход на крок ‛%s’\n"

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"У Вашай сістэме маецца недахоп рэсурсаў, таму магчымы праблемы\n"
"пры ўсталяванні Mandriva Linux. У гэтым выпадку паспрабуйце тэкставую\n"
"праграму ўсталявання. Для гэтага націсніце ‛F1’ у час загрузкі, а потым\n"
"набярыце ‛text’ і націсніце <ENTER>."

#: install_steps_gtk.pm:211 install_steps_interactive.pm:630
#, c-format
msgid "Package Group Selection"
msgstr "Выбар групы пакетаў"

#: install_steps_gtk.pm:254 install_steps_interactive.pm:573
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Агульны памер: %d / %d Мб"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "Дрэнны пакет"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "Вэрсія: "

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "Памер: "

#: install_steps_gtk.pm:302
#, c-format
msgid "%d KB\n"
msgstr ""

#: install_steps_gtk.pm:303
#, fuzzy, c-format
msgid "Importance: "
msgstr "важна"

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету"

#: install_steps_gtk.pm:340 network/thirdparty.pm:331
#, c-format
msgid "due to missing %s"
msgstr ""

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:343
#, fuzzy, c-format
msgid "in order to keep %s"
msgstr "Уласьцівасьці акна"

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання"

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "Наступныя пакеты будуць даданы да сістэмы"

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "Наступныя пакеты будуць выдалены"

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмяніць"

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны"

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Гэты пакет павінен быць абноўлены\n"
"Вы ўпэўнены, што хочаце адмяніць вылучэнне?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Яго патрэбна абнавіць"

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr ""

#: install_steps_gtk.pm:394
#, fuzzy, c-format
msgid "Load/Save selection"
msgstr "Перанесьці вылучэньне"

#: install_steps_gtk.pm:395
#, fuzzy, c-format
msgid "Updating package selection"
msgstr "Асабісты выбар пакетаў"

#: install_steps_gtk.pm:400
#, fuzzy, c-format
msgid "Minimal install"
msgstr "Ахоўнік экрану"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:492
#, c-format
msgid "Choose the packages you want to install"
msgstr "Выбар пакетаў для ўсталявання"

#: install_steps_gtk.pm:431 install_steps_interactive.pm:716
#, c-format
msgid "Installing"
msgstr "Усталёўваем"

#: install_steps_gtk.pm:457
#, fuzzy, c-format
msgid "No details"
msgstr "Падрабязнасці"

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "Засталося часу "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "Чакаецца"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d пакетаў"

#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:740
#, c-format
msgid "Refuse"
msgstr "Адказаць"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:744
#, fuzzy, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Змяніце ваш Cd-Rom!\n"
"\n"
"Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок "
"пасля.\n"
"Калі вы не маеце яго, націсніце Адмяніць, каб адмяніць усталяванне з гэтага "
"Cd."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:755
#, c-format
msgid "There was an error ordering packages:"
msgstr "Атрымалася памылка ўпарадкавання пакетаў:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:759
#, c-format
msgid "There was an error installing packages:"
msgstr "Атрымалася памылка ўпарадкавання пакетаў:"

#: install_steps_gtk.pm:560 install_steps_interactive.pm:755
#: install_steps_interactive.pm:759
#, c-format
msgid "Go on anyway?"
msgstr "Усё роўна працягваць?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:935 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Агульныя зьвесткі"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:931
#: install_steps_interactive.pm:1080
#, fuzzy, c-format
msgid "not configured"
msgstr "Настроіць панэль"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr ""

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "Ліцэнзійная дамова"

#: install_steps_interactive.pm:89
#, fuzzy, c-format
msgid "Release Notes"
msgstr "Калі ласка, пачакайце"

#: install_steps_interactive.pm:120
#, fuzzy, c-format
msgid "Please choose your keyboard layout."
msgstr "Калі ласка, абярыце тып клавіятуры."

#: install_steps_interactive.pm:122
#, c-format
msgid "Here is the full list of available keyboards"
msgstr ""

#: install_steps_interactive.pm:152
#, fuzzy, c-format
msgid "Install/Upgrade"
msgstr "Усталёўваем"

#: install_steps_interactive.pm:153
#, c-format
msgid "Is this an install or an upgrade?"
msgstr ""

#: install_steps_interactive.pm:159
#, c-format
msgid "Upgrade %s"
msgstr ""

#: install_steps_interactive.pm:172
#, c-format
msgid "Encryption key for %s"
msgstr ""

#: install_steps_interactive.pm:195
#, fuzzy, c-format
msgid "Please choose your type of mouse."
msgstr "калі ласка, пазначце тып вашай мышы."

#: install_steps_interactive.pm:196
#, c-format
msgid "Mouse choice"
msgstr ""

#: install_steps_interactive.pm:205 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Порт мышы"

#: install_steps_interactive.pm:206 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."

#: install_steps_interactive.pm:216
#, c-format
msgid "Buttons emulation"
msgstr ""

#: install_steps_interactive.pm:218
#, fuzzy, c-format
msgid "Button 2 Emulation"
msgstr "Калькулятар"

#: install_steps_interactive.pm:219
#, c-format
msgid "Button 3 Emulation"
msgstr ""

#: install_steps_interactive.pm:240
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:240
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Настройка карт PCMCIA ..."

#: install_steps_interactive.pm:247
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:247
#, c-format
msgid "Configuring IDE"
msgstr "Настройка IDE"

#: install_steps_interactive.pm:267
#, c-format
msgid "No partition available"
msgstr "няма даступных раздзелаў"

#: install_steps_interactive.pm:270
#, c-format
msgid "Scanning partitions to find mount points"
msgstr ""

#: install_steps_interactive.pm:277
#, c-format
msgid "Choose the mount points"
msgstr "Абярыце пункты манціравання"

#: install_steps_interactive.pm:325
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:330
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""

#: install_steps_interactive.pm:366
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Выбар раздзелаў для фарматавання"

#: install_steps_interactive.pm:368
#, c-format
msgid "Check bad blocks?"
msgstr "Праверыць на наяўнасць дрэнных блокаў?"

#: install_steps_interactive.pm:396
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:399
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Не хапае месца ў буферы падкачкі (swap) для ўсталявання, павялічце яго."

#: install_steps_interactive.pm:408
#, fuzzy, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Прагляд даступных пакетаў"

#: install_steps_interactive.pm:409 install_steps_interactive.pm:461
#, c-format
msgid "Looking for available packages..."
msgstr "Прагляд даступных пакетаў"

#: install_steps_interactive.pm:430 install_steps_interactive.pm:835
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Выбар люстра для атрымання пакетаў"

#: install_steps_interactive.pm:470
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Ваша сістэма не мае дастакова месца для ўсталявання ці абнаўлення (%d > %d)"

#: install_steps_interactive.pm:504
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""

#: install_steps_interactive.pm:506
#, c-format
msgid "Load"
msgstr "Загрузка"

#: install_steps_interactive.pm:506 standalone/drakbackup:4055
#: standalone/drakbackup:4125 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "Захаваць"

#: install_steps_interactive.pm:514
#, fuzzy, c-format
msgid "Bad file"
msgstr "Загрузка файла"

#: install_steps_interactive.pm:587
#, c-format
msgid "Selected size is larger than available space"
msgstr ""

#: install_steps_interactive.pm:602
#, c-format
msgid "Type of install"
msgstr ""

#: install_steps_interactive.pm:603
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: install_steps_interactive.pm:607
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""

#: install_steps_interactive.pm:608
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:647 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Усё"

#: install_steps_interactive.pm:686
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Калі вы маеце ўсе CD дыскі са спіса ніжэй, націсніце Ок.\n"
"Калі вы не маеце ані воднага з гэтых CD дыскаў, націсніце Адмяніць.\n"
"Калі некаторых з CD дыскаў не маеце, адмяніце іх выдзяленне і націсніце Ок."

#: install_steps_interactive.pm:691
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom пазначаны \"%s\""

#: install_steps_interactive.pm:716
#, c-format
msgid "Preparing installation"
msgstr "Падрыхтоўка ўсталяваньня"

#: install_steps_interactive.pm:724
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Усталяванне пакету %s\n"
"%d%%"

#: install_steps_interactive.pm:773
#, c-format
msgid "Post-install configuration"
msgstr "Настройка пасля ўсталявання"

#: install_steps_interactive.pm:780
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:808
#, c-format
msgid "Updates"
msgstr ""

#: install_steps_interactive.pm:809
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""

#: install_steps_interactive.pm:830
#, fuzzy, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў"

#: install_steps_interactive.pm:849
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў"

#: install_steps_interactive.pm:853
#, fuzzy, c-format
msgid "Unable to contact mirror %s"
msgstr "Немагчыма адчыніць файл %s\n"

#: install_steps_interactive.pm:853
#, fuzzy, c-format
msgid "Would you like to try again?"
msgstr "Дрэнны выбар, паспрабуйце яшче\n"

#: install_steps_interactive.pm:880 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "Які ваш часавы пояс?"

#: install_steps_interactive.pm:885
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: install_steps_interactive.pm:893
#, fuzzy, c-format
msgid "NTP Server"
msgstr "NIS сэервер:"

#: install_steps_interactive.pm:948 install_steps_interactive.pm:956
#: install_steps_interactive.pm:974 install_steps_interactive.pm:981
#: install_steps_interactive.pm:1132 services.pm:133
#: standalone/drakbackup:1585
#, c-format
msgid "System"
msgstr "Сістэма"

#: install_steps_interactive.pm:988 install_steps_interactive.pm:1015
#: install_steps_interactive.pm:1032 install_steps_interactive.pm:1048
#: install_steps_interactive.pm:1059
#, c-format
msgid "Hardware"
msgstr "Абсталяваньне"

#: install_steps_interactive.pm:994 install_steps_interactive.pm:1003
#, c-format
msgid "Remote CUPS server"
msgstr "Аддалены сэервер CUPS"

#: install_steps_interactive.pm:994
#, fuzzy, c-format
msgid "No printer"
msgstr "Імя друкаркі"

#: install_steps_interactive.pm:1036
#, fuzzy, c-format
msgid "Do you have an ISA sound card?"
msgstr "Ці ёсць у вас іншы?"

#: install_steps_interactive.pm:1038
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""

#: install_steps_interactive.pm:1040
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: install_steps_interactive.pm:1060
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "Запуск X пры старце сістэмы"

#: install_steps_interactive.pm:1066 install_steps_interactive.pm:1078
#, fuzzy, c-format
msgid "Network & Internet"
msgstr "Сеткавы інтэрфейс"

#: install_steps_interactive.pm:1080
#, fuzzy, c-format
msgid "configured"
msgstr "Настроіць панэль"

#: install_steps_interactive.pm:1089 install_steps_interactive.pm:1103
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "Бясьпека"

#: install_steps_interactive.pm:1108
#, c-format
msgid "activated"
msgstr ""

#: install_steps_interactive.pm:1108
#, c-format
msgid "disabled"
msgstr "выключаны"

#: install_steps_interactive.pm:1119
#, fuzzy, c-format
msgid "Boot"
msgstr "Манітор"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1123 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s на %s"

#: install_steps_interactive.pm:1137 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: install_steps_interactive.pm:1149
#, fuzzy, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Меню не было захавана. Ці сапраўды вы жадаеце выйсці?"

#: install_steps_interactive.pm:1230
#, c-format
msgid "Preparing bootloader..."
msgstr "Падрыхтоўка загрузчыка"

#: install_steps_interactive.pm:1240
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""

#: install_steps_interactive.pm:1246
#, c-format
msgid "Do you want to use aboot?"
msgstr "Вы жадаеце выкарыстоўваць aboot?"

#: install_steps_interactive.pm:1249
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Памылка ўсталявання aboot, \n"
"спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?"

#: install_steps_interactive.pm:1266
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1295 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Устаўце дыскету ў дыскавод %s"

#: install_steps_interactive.pm:1300
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Устаўце дыскету ў дыскавод %s"

#: install_steps_interactive.pm:1302
#, c-format
msgid "Creating auto install floppy..."
msgstr "Стварэнне дыскеты для ўсталявання"

#: install_steps_interactive.pm:1314
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Некаторыя крокі не завершаны.\n"
"Вы сапраўды жадаеце выйсці зараз?"

#: install_steps_interactive.pm:1324 standalone/draksambashare:422
#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
#: standalone/logdrake:452 standalone/logdrake:458
#, fuzzy, c-format
msgid "Congratulations"
msgstr "Прыміце віншаванні!"

#: install_steps_interactive.pm:1332 install_steps_interactive.pm:1333
#, fuzzy, c-format
msgid "Generate auto install floppy"
msgstr "Стварэнне дыскеты для ўсталявання"

#: install_steps_interactive.pm:1334
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Усталяванне Mandriva Linux %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> паміж элементамі  |  <Space> выбар  | <F12> наступны экран "

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "Выбар файла"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
#: standalone/drakfont:656 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1129 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "Дадаць"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1086
#: standalone/draksambashare:1139 standalone/draksambashare:1178
#, c-format
msgid "Modify"
msgstr "Зьмяненьне"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1087
#: standalone/draksambashare:1147 standalone/draksambashare:1186
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "Выдаліць"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "Простые"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "Скончыць"

#: interactive/newt.pm:92
#, fuzzy, c-format
msgid "Do"
msgstr "Зроблена"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Дрэнны выбар, паспрабуйце яшче\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ваш выбар? (змоўчанне %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:70
#, fuzzy, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Ваш выбар? (змоўчанне %s) "

#: interactive/stdio.pm:94
#, fuzzy, c-format
msgid "Button `%s': %s"
msgstr "Клявіша %d:"

#: interactive/stdio.pm:95
#, fuzzy, c-format
msgid "Do you want to click on this button?"
msgstr "Вы жадаеце выкарыстоўваць aboot?"

#: interactive/stdio.pm:104
#, fuzzy, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Ваш выбар? (змоўчанне %s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr ""

#: keyboard.pm:171 keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "Чешскі (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "Нямецкі"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:174 keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "Іспанскі"

#: keyboard.pm:175 keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "Фінскі"

#: keyboard.pm:176 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "Французскі"

#: keyboard.pm:177 keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "Нарвежскі"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "Польскі"

#: keyboard.pm:179 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "Рускі"

#: keyboard.pm:181 keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "Швецкі"

#: keyboard.pm:182 keyboard.pm:317
#, c-format
msgid "UK keyboard"
msgstr "UK клавіятура"

#: keyboard.pm:183 keyboard.pm:320
#, c-format
msgid "US keyboard"
msgstr "US клавіятура"

#: keyboard.pm:185
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Албанская:"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "Армянскі (стары)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "Армянскі (typewriter)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "Армянскі (фанетычны)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr ""

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Азербайджанскі (latin)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "Бельгійскі"

#: keyboard.pm:192
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "Армянскі (typewriter)"

#: keyboard.pm:193
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "Бельгійскі"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "Балгарскі (фанетычны)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "Балгарскі (БДС)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "Бразільскі (ABNT-2)"

#: keyboard.pm:197
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "Румынская:"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Беларускі"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "Швейцарскі (Нямецкая раскладка)"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "Швейцарскі (Французская раскладка)"

#: keyboard.pm:202
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Харвацкі"

#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "Чешскі (QWERTY)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "Нямецкі (няма заблакіраваных клавіш)"

#: keyboard.pm:207
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "Авангард"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "Дацкі"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:211
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Нарвежскі)"

#: keyboard.pm:213
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (Нарвежскі)"

#: keyboard.pm:215
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (US)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (Нарвежскі)"

#: keyboard.pm:218
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (US)"

#: keyboard.pm:219
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (US)"

#: keyboard.pm:220
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Румынская:"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Эстонскі"

#: keyboard.pm:224
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "Грэчаскі"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "Грузінскі (\"Руская\" раскладка)"

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "Грузінскі (\"Лацінская\" раскладка)"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "Грэчаскі"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Харвацкі"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "Мадьярскі"

#: keyboard.pm:234
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "Ірландская:"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "Іўрыт"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "Іўрыт (фанетычны)"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Іранскі"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Ісландскі"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "Італьянскі"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""

#: keyboard.pm:244
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "Японскі 106 клавіш"

#: keyboard.pm:245
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Панама"

#: keyboard.pm:248
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "UK клавіятура"

#: keyboard.pm:250
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "Армянскі (фанетычны)"

#: keyboard.pm:251
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "UK клавіятура"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "Лаціна-Амерыканскі"

#: keyboard.pm:254
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "Лаціна"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Літоўскі AZERTY (стары)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Літоўскі AZERTY (новы)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Літоўскі \"нумар радка\" QWERTY"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Літоўскі \"фанетычны\" QWERTY"

#: keyboard.pm:260
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "Латвійская:"

#: keyboard.pm:261
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "Малазыя"

#: keyboard.pm:263
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Македонія"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr ""

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "Галандскі"

#: keyboard.pm:270
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "Опера"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Польскі (стандартная раскладка)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Польскі (qwertz раскладка)"

#: keyboard.pm:274
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "Польскі"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "Партугальскі"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "Канадскі (Квебэк)"

#: keyboard.pm:279
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "Румынская:"

#: keyboard.pm:280
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "Румынская:"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "Рускі (фанетычны)"

#: keyboard.pm:283
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Dvorak (Нарвежскі)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:286
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "Тайская клавіятура"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "Славенскі"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "Славацкі (QWERTZ)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "Славацкі (QWERTY)"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr ""

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr ""

#: keyboard.pm:296
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "Армянскі (фанетычны)"

#: keyboard.pm:297
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "Такелаў"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr ""

#: keyboard.pm:300
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Армянскі (typewriter)"

#: keyboard.pm:301
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "Тайская клавіятура"

#: keyboard.pm:302
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "Тайская клавіятура"

#: keyboard.pm:304
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "Тайская клавіятура"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:308
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:310
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Тайская клавіятура"

#: keyboard.pm:312
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "Нямецкі"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "Турэцкі (традыцыёная \"F\" мадэль)"

#: keyboard.pm:314
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "Турэцкі (сучасная \"Q\" мадэль)"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "Украінскі"

#: keyboard.pm:319
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Опера"

#: keyboard.pm:321
#, c-format
msgid "US keyboard (international)"
msgstr "US клавіятура (міжнародная)"

#: keyboard.pm:322
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr ""

#: keyboard.pm:324
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "Вьетнамскі \"нумар радка\" QWERTY"

#: keyboard.pm:325
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "Азербайджанскі (latin)"

#: keyboard.pm:332
#, c-format
msgid "Right Alt key"
msgstr ""

#: keyboard.pm:333
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""

#: keyboard.pm:334
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:335
#, c-format
msgid "CapsLock key"
msgstr ""

#: keyboard.pm:336
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr ""

#: keyboard.pm:337
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: keyboard.pm:338
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:339
#, fuzzy, c-format
msgid "\"Menu\" key"
msgstr "Рэдактар мэню"

#: keyboard.pm:340
#, fuzzy, c-format
msgid "Left \"Windows\" key"
msgstr "Паводзіны вокнаў"

#: keyboard.pm:341
#, c-format
msgid "Right \"Windows\" key"
msgstr ""

#: keyboard.pm:342
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""

#: keyboard.pm:343
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""

#: keyboard.pm:344
#, c-format
msgid "Left Shift key"
msgstr ""

#: keyboard.pm:345
#, c-format
msgid "Right Shift key"
msgstr ""

#: keyboard.pm:346
#, c-format
msgid "Left Alt key"
msgstr ""

#: keyboard.pm:347
#, fuzzy, c-format
msgid "Left Control key"
msgstr "Кантролер гучнасьці"

#: keyboard.pm:348
#, fuzzy, c-format
msgid "Right Control key"
msgstr "Кантролер гучнасьці"

#: keyboard.pm:384
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#: keyboard.pm:389
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "Андора"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "Злучаныя Арабскія Эміраты"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "Афганістан"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "Анцігуа і Барбуда"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "Ангулла"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "Альбанія"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "Арменія"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "Нідэрлянская Анцілія"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "Ангола"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "Антарктыка"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Аргенціна"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "Амэрыканскае Самоа"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "Аруба"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "Азарбаджан"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Босьнія й Герцэгавіна"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "Барбадос"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "Бангладэш"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "Буркіна Хвасо"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "Баўгарыя"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "Бахрэйн"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "Бурундзі"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "Бенін"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "Бермуды"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "Брунэі Дурасалям"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "Балівія"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "Багамы"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "Бутан"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "Выспа Боўвіт"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "Батсвана"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "Беларусь"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "Беліз"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Какосавыя выспы"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "Цэнтральная Афрыканская Рэспубліка"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "Котэ дэ Інворэ"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "Выспы Кука"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "Чылі"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "Камэрун"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "Кітай"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "Калюмбія"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "Сэрбія і Чарнагорыя"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "Куба"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "Капа Вэрдэ"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "Выспа Расства"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "Кіпар"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "Джыботу"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "Дамініка"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "Дамініканская Рэспубліка"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "Альджыр"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "Эквадор"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "Эгіпэт"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "Заходняя Сахара"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "Эрытрыя"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "Эпіопія"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "Хвіджі"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr ""

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "Мікранэзыян"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "Выспы Фаро"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "Габон"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "Злучанае Каралеўства"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "Грэнада"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "Грузыя"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "Француская Гвіяна"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "Гана"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "Гібралтар"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "Грынляндыя"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "Гамбія"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "Гвінея"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Гвадэлупа"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "Экватарыяльная Гвінэя"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "Гватэмала"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "Гуам"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "Гвінэя-Бісаў"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "Гайяна"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr ""

#: lang.pm:287
#, fuzzy, c-format
msgid "Heard and McDonald Islands"
msgstr "Выспы Паўночнае Мар'яны"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "Гандурас"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "Харватыя"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "Гаіці"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "Інданэзыя"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "Індыя"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Брытанская тэрыторыя Індыйскага акіяна"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "Ірак"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "Іран"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "Ісьляндыя"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "Ямайка"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "Іярданія"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "Кенія"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "Кыргізтан"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "Камбоджа"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "Кірыбаці"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "Камарас"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "Паўночная Карэя"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "Карэя"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "Кувэйт"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "Кайманавыя выспы"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "Казахстан"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "Лаос"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "Лібанон"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "Санта Лючыя"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "Ліхтэнштайн"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "Шры Ланка"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "Лібэрыя"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "Лісота"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "Жамойція"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "Люксембург"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "Лівонія"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "Лібія"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "Марока"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "Манака"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "Малдова"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "Мадагаскар"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "Маршалавы выспы"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "Македонія"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "Малі"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "Маянмар"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "Манголія"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "Выспы Паўночнае Мар'яны"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "Марцінік"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "Маўрытанія"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "Мансэрат"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "Мальта"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "Марыціўс"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "Мальды"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "Маляві"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "Мэксыка"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "Малазыя"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "Мазамбік"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "Намібія"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "Новая Калядонія"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "Нігер"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "Норфалскія выспы"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "Нігерыя"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "Нікарагуа"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "Нэпал"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "Наўру"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "Ню"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "Аман"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "Панама"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "Перу"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "Француская Палінэзыя"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "Папуа Новая Гвінэя"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "Хвіліпіны"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "Пакістан"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr ""

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "Паткаірн"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "Пуэрта Рыка"

#: lang.pm:369
#, fuzzy, c-format
msgid "Palestine"
msgstr "Панэль"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "Парагвай"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "Палаў"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "Катар"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "Перааб'яднаньне"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "Румынія"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "Руанда"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "Савудаўская Арабія"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "Саламонавы выспы"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "Сейшэлы"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "Судан"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "Сынгапур"

#: lang.pm:384
#, fuzzy, c-format
msgid "Saint Helena"
msgstr "Санта Лючыя"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "Славенія"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr ""

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "С'ера Ліонэ"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "Сан Марына"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "Сенегал"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "Самалі"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "Сарынам"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "Саа Тамэ й Прынсыпэ"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "Эль Сальвадор"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "Сырыя"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "Швазіланд"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Выспы Таркс і Кайкас"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "Чад"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "Паўднёвыя Францускія Тэрыторыі"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "Тога"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "Такжыкістан"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "Такелаў"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "Усходні Тымор"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "Туркменістан"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "Тунісія"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "Тонга"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "Турцыя"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "Трынідад і Табага"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "Тувалю"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "Танзаныя"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "Украіна"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "Уганда"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Няістотна блізкія да Злучаных штатаў выспы"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "Уругвай"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "Узбэкістан"

#: lang.pm:419
#, fuzzy, c-format
msgid "Vatican"
msgstr "Латвійская:"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr ""

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "Венэсуэла"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr ""

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr ""

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "Уэтнам"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "Ванааці"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "Самоа"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "Йемен"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "Майотэ"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "Замбія"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "Зімбабве"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "Сардэчна запрашаем у %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr ""

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""

#: modules/interactive.pm:19
#, fuzzy, c-format
msgid "This driver has no configuration parameter!"
msgstr "Настройка драйверу Sun"

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "Настройка IDE"

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "You can configure each parameter of the module here."
msgstr "Тут Вы можаце настроіць зьнешні выгляд панэлі"

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Знойдзены %s інтэрфейсы"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Ці ёсць у вас іншы?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Ці ёсць у вас %s інтэрфейс?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Гл. апісанне абсталявання"

#: modules/interactive.pm:82
#, fuzzy, c-format
msgid "Installing driver for USB controller"
msgstr "Усталяванне драйверу для %s карты %s"

#: modules/interactive.pm:83
#, fuzzy, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Усталяванне драйверу для %s карты %s"

#: modules/interactive.pm:84
#, fuzzy, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Усталяванне драйверу для %s карты %s"

#: modules/interactive.pm:85
#, fuzzy, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Усталяванне драйверу для %s карты %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Усталяванне драйверу для %s карты %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(модуль %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Вы не можаце задаць опцыі модулю %s.\n"
"Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n"
"Напрыклад, ‟io=0x300 irq=7”"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "Опцыі модулю:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "Які драйвер %s паспрабаваць?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"У некаторых выпадках %s драйверу патрэбна некаторая дадатковая інфармацыя,\n"
"але звычайна гэта не патрабуецца. Ці не жадаеце вы задаць для яго\n"
"дадатковыя опцыі, ці дазволіце драйверу пратэсціраваць машыну\n"
"ў пошуках неабходнай інфармацыі? Магчыма, тэсціраванне прывядзе\n"
"да спынення камп'ютэру, але яно нічога не сапсуе."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "Аўтапошук"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "Пазначце параметры"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Загрузка модулю %s не прайшла.\n"
"Жадаеце паспрабаваць з іншымі параметрамі?"

#: modules/parameters.pm:49
#, fuzzy, c-format
msgid "a number"
msgstr "Нумар запісу"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr ""

#: modules/parameters.pm:53
#, fuzzy, c-format
msgid "comma separated strings"
msgstr "Фарматаванне раздзелаў"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - Мыш"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Стандартны"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, fuzzy, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Звычайная мыш з 2 кнопкамі"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
#: network/netconnect.pm:614 network/netconnect.pm:619
#: network/netconnect.pm:635 network/netconnect.pm:637
#, c-format
msgid "Automatic"
msgstr "Аўтаматычна"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, fuzzy, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:47 mouse.pm:79
#, fuzzy, c-format
msgid "1 button"
msgstr "3 кнопкі"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Звычайная мыш з 2 кнопкамі"

#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Звычайная мыш з 3 кнопкамі"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "З колам"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "паслядоўная"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Звычайная мыш з 3 кнопкамі"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (паслядоўная, стары тып C7)"

#: mouse.pm:72
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (паслядоўная, стары тып C7)"

#: mouse.pm:74
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:77
#, fuzzy, c-format
msgid "busmouse"
msgstr "Няма мышы"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 кнопкі"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 кнопкі"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr ""

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Агульнае"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "няма"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Няма мышы"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr ""

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."

#: mouse.pm:563
#, fuzzy, c-format
msgid "To activate the mouse,"
msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "Рушце колам мышы!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, fuzzy, c-format
msgid "Web Server"
msgstr "Сервак"

#: network/drakfirewall.pm:17
#, fuzzy, c-format
msgid "Domain Name Server"
msgstr "Імя дамену"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "X сэервер"

#: network/drakfirewall.pm:27
#, fuzzy, c-format
msgid "FTP server"
msgstr "X сэервер"

#: network/drakfirewall.pm:32
#, fuzzy, c-format
msgid "Mail Server"
msgstr "Сервак"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr ""

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X сэервер"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr ""

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "Аддалены сэервер CUPS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr ""

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr ""

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:209
#, fuzzy, c-format
msgid "Other ports"
msgstr "Парты вываду:"

#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:385 standalone/net_applet:422
#, fuzzy, c-format
msgid "Interactive Firewall"
msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"

#: network/drakfirewall.pm:252
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""

#: network/drakfirewall.pm:257
#, c-format
msgid "Use Interactive Firewall"
msgstr ""

#: network/ifw.pm:129
#, fuzzy, c-format
msgid "Port scanning"
msgstr "Нічога"

#: network/ifw.pm:130
#, fuzzy, c-format
msgid "Service attack"
msgstr "Кіраваньне сэрвісамі"

#: network/ifw.pm:131
#, fuzzy, c-format
msgid "Password cracking"
msgstr "Паўтарыце пароль"

#: network/ifw.pm:132
#, c-format
msgid "\"%s\" attack"
msgstr ""

#: network/ifw.pm:134
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr ""

#: network/ifw.pm:135
#, fuzzy, c-format
msgid "The %s service has been attacked by %s."
msgstr "Гэтая падзея была зьменена."

#: network/ifw.pm:136
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr ""

#: network/ifw.pm:137
#, fuzzy, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr "Гэтая падзея была зьменена."

#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
#: network/netconnect.pm:561 network/netconnect.pm:709
#: network/netconnect.pm:713
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "I do not know"
msgstr "Не вядома"

#: network/isdn.pm:161 network/netconnect.pm:396
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:396
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:602 network/netconnect.pm:619
#: network/netconnect.pm:635
#, fuzzy, c-format
msgid "Manual"
msgstr "Студзень"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr ""

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:494
#: network/netconnect.pm:506
#, c-format
msgid "Manual choice"
msgstr ""

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "Унутраная ISDN карта"

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
#, fuzzy, c-format
msgid "Manual configuration"
msgstr "Захаваць канфігурацыю меню"

#: network/netconnect.pm:81 standalone/drakroam:121
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr ""

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr ""

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr ""

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""

#: network/netconnect.pm:103 standalone/harddrake2:329
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "невядома"

#: network/netconnect.pm:120 network/thirdparty.pm:220
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr ""

#: network/netconnect.pm:121
#, c-format
msgid "Sagem USB modem"
msgstr ""

#: network/netconnect.pm:122
#, fuzzy, c-format
msgid "Bewan modem"
msgstr "Рэжым злучэння"

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:127
#, fuzzy, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: network/netconnect.pm:128
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "Канфігурацыя"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:136
#, c-format
msgid "Bridged Ethernet LLC"
msgstr ""

#: network/netconnect.pm:137
#, c-format
msgid "Bridged Ethernet VC"
msgstr ""

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr ""

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr ""

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "на аснове скрыпту"

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "на аснове тэрміналу"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, fuzzy, c-format
msgid "PAP/CHAP"
msgstr "CHAP"

#: network/netconnect.pm:251 standalone/drakconnect:56
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "Канфігурацыя сеткі"

#: network/netconnect.pm:257
#, fuzzy, c-format
msgid "LAN connection"
msgstr "Дзеяньні"

#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "Канфігурацыя"

#: network/netconnect.pm:259
#, fuzzy, c-format
msgid "ADSL connection"
msgstr "Дзеяньні"

#: network/netconnect.pm:260
#, fuzzy, c-format
msgid "Cable connection"
msgstr "Размеркаванне"

#: network/netconnect.pm:261
#, fuzzy, c-format
msgid "ISDN connection"
msgstr "Дзеяньні"

#: network/netconnect.pm:262
#, fuzzy, c-format
msgid "Modem connection"
msgstr "Размеркаванне"

#: network/netconnect.pm:263
#, c-format
msgid "DVB connection"
msgstr ""

#: network/netconnect.pm:273
#, fuzzy, c-format
msgid "Choose the connection you want to configure"
msgstr "Выбар раздзелаў для фарматавання"

#: network/netconnect.pm:288 network/netconnect.pm:787
#, c-format
msgid "Connection Configuration"
msgstr "Настройка далучэння да Інтэрнэту"

#: network/netconnect.pm:288 network/netconnect.pm:788
#, c-format
msgid "Please fill or check the field below"
msgstr "Калі ласка, запоўніце ці пазначце поле ніжэй"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "Ваш асабісты тэлефонны нумар"

#: network/netconnect.pm:292 network/netconnect.pm:791
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Імя правайдару, напрыклад правайдар.net"

#: network/netconnect.pm:293 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "Нумар тэлефону правайдара"

#: network/netconnect.pm:294
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "Опцыі прынтэру"

#: network/netconnect.pm:295
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "Опцыі прынтэру"

#: network/netconnect.pm:296 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "Рэжым злучэння"

#: network/netconnect.pm:297 standalone/drakconnect:449
#: standalone/drakconnect:517
#, fuzzy, c-format
msgid "Connection speed"
msgstr "Імя злучэння"

#: network/netconnect.pm:298 standalone/drakconnect:454
#, fuzzy, c-format
msgid "Connection timeout (in sec)"
msgstr "Настройка далучэння да Інтэрнэту"

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:794 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "Імя для ўваходу (імя карыстальніку)"

#: network/netconnect.pm:300 network/netconnect.pm:325
#: network/netconnect.pm:795 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "Пароль для ўваходу"

#: network/netconnect.pm:301 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "IRQ карты"

#: network/netconnect.pm:302 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "Адрасы памяці карты (DMA)"

#: network/netconnect.pm:303 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "IO карты"

#: network/netconnect.pm:304 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "IO_0 карты"

#: network/netconnect.pm:305
#, c-format
msgid "Card IO_1"
msgstr "IO_1 карты"

#: network/netconnect.pm:320
#, fuzzy, c-format
msgid "Cable: account options"
msgstr "Дазволіць тэрмін дзеяньня запісу"

#: network/netconnect.pm:323
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:349 network/netconnect.pm:671
#: network/netconnect.pm:827 network/netconnect.pm:1171
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "Пазначце сеткавы інтэрфейс"

#: network/netconnect.pm:351 network/netconnect.pm:386
#: network/netconnect.pm:672 network/netconnect.pm:829 network/shorewall.pm:70
#: standalone/drakconnect:713
#, fuzzy, c-format
msgid "Net Device"
msgstr "Прылада"

#: network/netconnect.pm:352 network/netconnect.pm:357
#, fuzzy, c-format
msgid "External ISDN modem"
msgstr "Унутраная ISDN карта"

#: network/netconnect.pm:385 standalone/harddrake2:216
#, fuzzy, c-format
msgid "Select a device!"
msgstr "Абярыце файл"

#: network/netconnect.pm:394 network/netconnect.pm:404
#: network/netconnect.pm:414 network/netconnect.pm:447
#: network/netconnect.pm:461
#, c-format
msgid "ISDN Configuration"
msgstr "Настройка ISDN"

#: network/netconnect.pm:395
#, c-format
msgid "What kind of card do you have?"
msgstr "Які тып карты вы маеце?"

#: network/netconnect.pm:405
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Калі вы маеце ISA карту, велічыні на наступным экране павінны быць "
"сапраўднымі.\n"
"\n"
"Калі вы маеце PCMCIA карту, вы павінны ведаць irq і io вашай карты.\n"

#: network/netconnect.pm:409
#, c-format
msgid "Continue"
msgstr "Працягнуць"

#: network/netconnect.pm:409
#, c-format
msgid "Abort"
msgstr "Адмяніць"

#: network/netconnect.pm:415
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr ""

#: network/netconnect.pm:433
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Драйвэр"

#: network/netconnect.pm:447
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Які пратакол вы жадаеце выкарыстоўваць?"

#: network/netconnect.pm:449 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Пратакол"

#: network/netconnect.pm:461
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"Абярыце вашага правайдара.\n"
"калі яго няма ў гэтым спісе, абярыце тып ‟Іншы”"

#: network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:708
#, fuzzy, c-format
msgid "Provider:"
msgstr "Прынтэр"

#: network/netconnect.pm:472
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: network/netconnect.pm:491
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "Пазначце карыстальнікаў каб аб'яднаць у гэтыю групу"

#: network/netconnect.pm:526
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Да якога паслядоўнага порту далучаны мадэм?"

#: network/netconnect.pm:555
#, c-format
msgid "Select your provider:"
msgstr ""

#: network/netconnect.pm:579
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Дазволіць тэрмін дзеяньня запісу"

#: network/netconnect.pm:582
#, c-format
msgid "Connection name"
msgstr "Імя злучэння"

#: network/netconnect.pm:583
#, c-format
msgid "Phone number"
msgstr "Нумар тэлефону"

#: network/netconnect.pm:584
#, c-format
msgid "Login ID"
msgstr "Імя (login ID)"

#: network/netconnect.pm:599 network/netconnect.pm:632
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Настроіць проксі сэрвэры"

#: network/netconnect.pm:602
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Інтэрнэт"

#: network/netconnect.pm:603 network/netconnect.pm:942
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "IP адрас"

#: network/netconnect.pm:604
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "Маска сеткі"

#: network/netconnect.pm:616
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:619
#, c-format
msgid "DNS"
msgstr ""

#: network/netconnect.pm:620
#, c-format
msgid "Domain name"
msgstr "Імя дамену"

#: network/netconnect.pm:621 network/netconnect.pm:792
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr ""

#: network/netconnect.pm:622 network/netconnect.pm:793
#: standalone/drakconnect:993
#, fuzzy, c-format
msgid "Second DNS Server (optional)"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: network/netconnect.pm:623
#, c-format
msgid "Set hostname from IP"
msgstr ""

#: network/netconnect.pm:635 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "Шлюз"

#: network/netconnect.pm:636 standalone/drakroam:124
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "IP адрас"

#: network/netconnect.pm:671
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "Настройка ISDN"

#: network/netconnect.pm:706
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "калі ласка, пазначце тып вашай мышы."

#: network/netconnect.pm:736
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""

#: network/netconnect.pm:739
#, fuzzy, c-format
msgid "ADSL connection type:"
msgstr "Дзеяньні"

#: network/netconnect.pm:797
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:798
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:801
#, c-format
msgid "Encapsulation:"
msgstr ""

#: network/netconnect.pm:831
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:832
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr ""

#: network/netconnect.pm:897
#, c-format
msgid "Zeroconf hostname resolution"
msgstr ""

#: network/netconnect.pm:898 network/netconnect.pm:929
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Настрйка драйверу Solaris"

#: network/netconnect.pm:899
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""

#: network/netconnect.pm:930
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Калі ласка, увядзіце IP канфігурацыю для вашай машыны.\n"
"Кожны пункт павінен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n"
"натацыі (напрыклад, 1.2.3.4)."

#: network/netconnect.pm:937 standalone/drakconnect:373
#, c-format
msgid "Assign host name from DHCP address"
msgstr ""

#: network/netconnect.pm:938 standalone/drakconnect:375
#, fuzzy, c-format
msgid "DHCP host name"
msgstr "Імя машыны"

#: network/netconnect.pm:943 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "Маска сеткі"

#: network/netconnect.pm:945 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:946 standalone/drakconnect:438
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "Сетка"

#: network/netconnect.pm:948 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr ""

#: network/netconnect.pm:950 standalone/drakconnect:460
#, fuzzy, c-format
msgid "Metric"
msgstr "абмежаванне"

#: network/netconnect.pm:951
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr ""

#: network/netconnect.pm:953 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr ""

#: network/netconnect.pm:955 standalone/drakconnect:379
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "Настройка далучэння да Інтэрнэту"

#: network/netconnect.pm:956 standalone/drakconnect:382
#, fuzzy, c-format
msgid "Get DNS servers from DHCP"
msgstr "IP сэервера SMB"

#: network/netconnect.pm:957 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:958 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:966 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP адрас павінен быць у фармаце 1.2.3.4"

#: network/netconnect.pm:970 standalone/drakconnect:680
#, fuzzy, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "IP адрас павінен быць у фармаце 1.2.3.4"

#: network/netconnect.pm:974
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:979 standalone/drakTermServ:1856
#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
#, fuzzy, c-format
msgid "%s already in use\n"
msgstr "%s ужо знойдзены "

#: network/netconnect.pm:1019
#, fuzzy, c-format
msgid "Choose an ndiswrapper driver"
msgstr "X сэервер"

#: network/netconnect.pm:1021
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr ""

#: network/netconnect.pm:1021
#, fuzzy, c-format
msgid "Install a new driver"
msgstr "Усталяванне сістэмы"

#: network/netconnect.pm:1033
#, c-format
msgid "Select a device:"
msgstr ""

#: network/netconnect.pm:1062
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:1065 standalone/drakconnect:404
#: standalone/drakroam:52
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "Рэжым злучэння"

#: network/netconnect.pm:1066
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:1066
#, fuzzy, c-format
msgid "Managed"
msgstr "Мэнэджэр файлаў"

#: network/netconnect.pm:1066
#, fuzzy, c-format
msgid "Master"
msgstr "Прайгравальнік дыскаў"

#: network/netconnect.pm:1066
#, fuzzy, c-format
msgid "Repeater"
msgstr "Цыклічна"

#: network/netconnect.pm:1066
#, fuzzy, c-format
msgid "Secondary"
msgstr "Нядзеля"

#: network/netconnect.pm:1066
#, c-format
msgid "Auto"
msgstr "Аўтаматычна"

#: network/netconnect.pm:1069 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:1070 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr ""

#: network/netconnect.pm:1075
#, c-format
msgid "Allow access point roaming"
msgstr ""

#: network/netconnect.pm:1077 standalone/drakconnect:406
#, fuzzy, c-format
msgid "Network ID"
msgstr "Сетка"

#: network/netconnect.pm:1078 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:1079 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1080 standalone/drakconnect:409
#, fuzzy, c-format
msgid "Bitrate (in b/s)"
msgstr "Бітрэйт: %d kb/s"

#: network/netconnect.pm:1081 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1082
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1089 standalone/drakconnect:421
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Аўтэнтыфікацыя"

#: network/netconnect.pm:1090 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1091
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1098 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1099
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1108 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1109
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1124
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1128
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1171
#, c-format
msgid "DVB configuration"
msgstr ""

#: network/netconnect.pm:1172
#, c-format
msgid "DVB Adapter"
msgstr ""

#: network/netconnect.pm:1189
#, c-format
msgid "DVB adapter settings"
msgstr ""

#: network/netconnect.pm:1192
#, c-format
msgid "Adapter card"
msgstr ""

#: network/netconnect.pm:1193
#, c-format
msgid "Net demux"
msgstr ""

#: network/netconnect.pm:1194
#, c-format
msgid "PID"
msgstr "PID"

#: network/netconnect.pm:1222
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Увядзіце імя сваёй машыны (host).\n"
"Імя вашай машыны павінна быць зададзена поўнасцю,\n"
"напрыклад ‟mybox.mylab.myco.com”.\n"
"Вы можаце таксама ўвесці IP адрас шлюзу, калі ён у вас ёсць."

#: network/netconnect.pm:1227
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1229 standalone/drakconnect:991
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "Імя машыны"

#: network/netconnect.pm:1229 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "Імя машыны"

#: network/netconnect.pm:1231
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "NIS сэервер:"

#: network/netconnect.pm:1232
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "NIS сэервер:"

#: network/netconnect.pm:1233
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "NIS сэервер:"

#: network/netconnect.pm:1234
#, fuzzy, c-format
msgid "Search domain"
msgstr "Шукаць: "

#: network/netconnect.pm:1235
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1236
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: network/netconnect.pm:1238
#, c-format
msgid "Gateway device"
msgstr "Прылада-шлюз"

#: network/netconnect.pm:1247
#, fuzzy, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "IP адрас павінен быць у фармаце 1.2.3.4"

#: network/netconnect.pm:1252 standalone/drakconnect:685
#, fuzzy, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "IP адрас павінен быць у фармаце 1.2.3.4"

#: network/netconnect.pm:1265
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1269
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "Імя машыны"

#: network/netconnect.pm:1272
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1282
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"

#: network/netconnect.pm:1295
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"

#: network/netconnect.pm:1311
#, fuzzy, c-format
msgid "Automatically at boot"
msgstr "Аўтаматычны"

#: network/netconnect.pm:1313
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1315
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1324
#, fuzzy, c-format
msgid "How do you want to dial this connection?"
msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"

#: network/netconnect.pm:1337
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Ці жадаеце зараз паспрабаваць далучыцца да Інтэрнэту?"

#: network/netconnect.pm:1345 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr ""

#: network/netconnect.pm:1370
#, fuzzy, c-format
msgid "The system is now connected to the Internet."
msgstr "Далучэнне да Інтэрнэту"

#: network/netconnect.pm:1371
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr ""

#: network/netconnect.pm:1372
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""

#: network/netconnect.pm:1387
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1390
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""

#: network/netconnect.pm:1391
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1402
#, c-format
msgid "(detected on port %s)"
msgstr ""

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1404
#, c-format
msgid "(detected %s)"
msgstr ""

#: network/netconnect.pm:1404
#, c-format
msgid "(detected)"
msgstr ""

#: network/netconnect.pm:1405
#, c-format
msgid "Network Configuration"
msgstr "Канфігурацыя сеткі"

#: network/netconnect.pm:1406
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: network/netconnect.pm:1409
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?"

#: network/netconnect.pm:1410
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""

#: network/netconnect.pm:1411
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""

#: network/netconnect.pm:1412
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?"

#: network/netconnect.pm:1413
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: network/netconnect.pm:1414
#, fuzzy, c-format
msgid "Internet connection"
msgstr "Сумеснае Інтэрнэт-злучэнне"

#: network/netconnect.pm:1431
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:411
#, c-format
msgid "Proxies configuration"
msgstr "Настройка proxy кэшуючых сэервераў"

#: network/network.pm:412
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080)"
msgstr ""

#: network/network.pm:413
#, c-format
msgid "HTTP proxy"
msgstr "HTTP proxy"

#: network/network.pm:414
#, c-format
msgid "Use HTTP proxy for HTTPS connections"
msgstr ""

#: network/network.pm:415
#, c-format
msgid "HTTPS proxy"
msgstr ""

#: network/network.pm:416
#, c-format
msgid "FTP proxy"
msgstr "FTP proxy"

#: network/network.pm:420
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy павінен быць http://..."

#: network/network.pm:421
#, c-format
msgid "Proxy should be https?://..."
msgstr ""

#: network/network.pm:422
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr ""

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/thirdparty.pm:232
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""

#: network/thirdparty.pm:241
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/thirdparty.pm:321
#, fuzzy, c-format
msgid "Could not install the packages (%s)!"
msgstr "Усталяванне пакету %s"

#: network/thirdparty.pm:329
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr ""

#: network/thirdparty.pm:330
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""

#: network/thirdparty.pm:332
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""

#: network/thirdparty.pm:372
#, fuzzy, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"

#: network/thirdparty.pm:374
#, c-format
msgid "No Windows system has been detected!"
msgstr ""

#: network/thirdparty.pm:384
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "Усталёўка"

#: network/thirdparty.pm:385
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""

#: network/thirdparty.pm:395
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Куды вы жадаеце манціраваць прыладу %s?"

#: network/thirdparty.pm:405
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/thirdparty.pm:409 network/thirdparty.pm:411
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "Захаванне на дыскету"

#: network/thirdparty.pm:409
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "Вылічэнне межаў файлавай сістэмы Windows"

#: network/thirdparty.pm:419
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/thirdparty.pm:424 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "Прыміце віншаванні!"

#: network/thirdparty.pm:424
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/thirdparty.pm:493
#, c-format
msgid "Looking for required software and drivers..."
msgstr ""

#: network/thirdparty.pm:498
#, fuzzy, c-format
msgid "Please wait, running device configuration commands..."
msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)"

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr ""

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr ""

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "памылка манціравання: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Пашыраны раздзел не падтрымліваецца гэтай платформай"

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Вы маеце дзірку ў табліцы радзелаў, але я не маю магчымасці яе скарыстаць.\n"
"Адзіны выхад у тым, каб перамясціць першасныя раздзелы так, каб дзірка ішла\n"
"адразу за пашыраным (extended) раздзелам"

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Аднаўленне з файла %s не атрымалася: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "Дрэнны файл рэзервовай копіі"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "Памылка запісу ў файл %s"

#: partition_table/raw.pm:253
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "павінны мець"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "важна"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "вельмі добра"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "добра"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "можа быць"

#: pkgs.pm:474
#, fuzzy, c-format
msgid "Downloading file %s..."
msgstr "Вызначэнне прыладаў..."

#: printer/cups.pm:105
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(модуль %s)"

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr ""

#: printer/cups.pm:117 standalone/printerdrake:200
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "Настроіць панэль"

#: printer/cups.pm:119
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "Аддалены сэервер CUPS"

#: printer/cups.pm:119 printer/printerdrake.pm:4886
#: printer/printerdrake.pm:4896 printer/printerdrake.pm:5055
#: printer/printerdrake.pm:5066 printer/printerdrake.pm:5280
#, c-format
msgid " (Default)"
msgstr " (Па дамаўленню)"

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr ""

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr ""

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr ""

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr ""

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr ""

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr ""

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: printer/data.pm:158
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr ""

#: printer/data.pm:159
#, fuzzy, c-format
msgid "Remote CUPS"
msgstr "Аддалены сэервер CUPS"

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:692
#: printer/main.pm:1810 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
#: printer/printerdrake.pm:3981
#, fuzzy, c-format
msgid "Unknown model"
msgstr "Невядомая гукавая карта"

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr "Лакальны прынтэр"

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "Аддалены прынтэр"

#: printer/main.pm:26
#, fuzzy, c-format
msgid "Printer on remote CUPS server"
msgstr "Аддалены сэервер CUPS"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, fuzzy, c-format
msgid "Printer on remote lpd server"
msgstr "Сервер друку"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Сеткавы прынтэр (TCP/Socket)"

#: printer/main.pm:29
#, fuzzy, c-format
msgid "Printer on SMB/Windows server"
msgstr "Сервер друку"

#: printer/main.pm:30
#, fuzzy, c-format
msgid "Printer on NetWare server"
msgstr "Сервер друку"

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, fuzzy, c-format
msgid "Enter a printer device URI"
msgstr "URI прынтэру"

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr "пажадана"

#: printer/main.pm:355 standalone/printerdrake:199
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "Настроіць панэль"

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr ""

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, fuzzy, c-format
msgid ", USB printer #%s"
msgstr "пашырэнне OSS %s"

#: printer/main.pm:366
#, fuzzy, c-format
msgid ", USB printer"
msgstr "Імя друкаркі"

#: printer/main.pm:370
#, fuzzy, c-format
msgid ", HP printer on a parallel port"
msgstr "Друкаркі ў выглядзе значак"

#: printer/main.pm:372
#, fuzzy, c-format
msgid ", HP printer on USB"
msgstr "Друкаркі ў выглядзе значак"

#: printer/main.pm:374
#, fuzzy, c-format
msgid ", HP printer on HP JetDirect"
msgstr "Друкаркі ў выглядзе значак"

#: printer/main.pm:376
#, fuzzy, c-format
msgid ", HP printer"
msgstr "Прынтэр"

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:385
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ""

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:395
#, fuzzy, c-format
msgid ", printing to %s"
msgstr "Памылка запісу ў файл %s"

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ""

#: printer/main.pm:429
#, c-format
msgid "Parallel port #%s"
msgstr ""

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, fuzzy, c-format
msgid "USB printer #%s"
msgstr "пашырэнне OSS %s"

#: printer/main.pm:434
#, fuzzy, c-format
msgid "USB printer"
msgstr "USB прылады"

#: printer/main.pm:438
#, c-format
msgid "HP printer on a parallel port"
msgstr ""

#: printer/main.pm:440
#, fuzzy, c-format
msgid "HP printer on USB"
msgstr "Друкаркі ў выглядзе значак"

#: printer/main.pm:442
#, fuzzy, c-format
msgid "HP printer on HP JetDirect"
msgstr "Друкаркі ў выглядзе значак"

#: printer/main.pm:444
#, fuzzy, c-format
msgid "HP printer"
msgstr "Прынтэр"

#: printer/main.pm:450
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:453
#, c-format
msgid "Multi-function device on a parallel port"
msgstr ""

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr ""

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr ""

#: printer/main.pm:463
#, fuzzy, c-format
msgid "Prints into %s"
msgstr "Заданьні друку"

#: printer/main.pm:466
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:474
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:479
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:482
#, fuzzy, c-format
msgid "Uses command %s"
msgstr "Порт"

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:689 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3119
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: printer/main.pm:1309 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "Прагляд лякальнай сеткі"

#: printer/main.pm:1311 printer/printerdrake.pm:227
#, fuzzy, c-format
msgid "Interface \"%s\""
msgstr "Сеткавыя інтэрфэйсы"

#: printer/main.pm:1313
#, fuzzy, c-format
msgid "Network %s"
msgstr "Сетка"

#: printer/main.pm:1315
#, fuzzy, c-format
msgid "Host %s"
msgstr "Хост:"

#: printer/main.pm:1344
#, c-format
msgid "%s (Port %s)"
msgstr ""

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:67
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "Настройка прылд OSS"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: printer/printerdrake.pm:82
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Адлучэнне ад сеткі"

#: printer/printerdrake.pm:84
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "Канфігурацыя"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, fuzzy, c-format
msgid "No remote machines"
msgstr "Выкарыстаць выдалены хост"

#: printer/printerdrake.pm:100
#, fuzzy, c-format
msgid "Additional CUPS servers: "
msgstr "Дадатковае праграмаванне:"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:115
#, c-format
msgid "Japanese text printing mode"
msgstr ""

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:123
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Настройка далучэння да Інтэрнэту"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4519
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "Укл."

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "Выкл"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "Лакальны прынтэр"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:179
#, fuzzy, c-format
msgid "Edit selected host/network"
msgstr "Рэдагаваць вылучаны радок"

#: printer/printerdrake.pm:188
#, c-format
msgid "Remove selected host/network"
msgstr ""

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr ""

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:358
#, fuzzy, c-format
msgid "Add server"
msgstr "Дадаць карыстальніка"

#: printer/printerdrake.pm:364
#, fuzzy, c-format
msgid "Edit selected server"
msgstr "Рэдагаваць вылучаны радок"

#: printer/printerdrake.pm:373
#, fuzzy, c-format
msgid "Remove selected server"
msgstr "/Выдаліць/Выбранае"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:422
#, c-format
msgid "Server IP missing!"
msgstr ""

#: printer/printerdrake.pm:428
#, c-format
msgid "The entered IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr ""

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Порт"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, fuzzy, c-format
msgid "On, Name or IP of remote server:"
msgstr "Сервер друку"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4528
#: printer/printerdrake.pm:4594
#, c-format
msgid "CUPS server name or IP address missing."
msgstr ""

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
#: printer/printerdrake.pm:4319 printer/printerdrake.pm:4414
#: printer/printerdrake.pm:4420 printer/printerdrake.pm:4448
#: printer/printerdrake.pm:4555 printer/printerdrake.pm:4664
#: printer/printerdrake.pm:4684 printer/printerdrake.pm:4693
#: printer/printerdrake.pm:4708 printer/printerdrake.pm:4909
#: printer/printerdrake.pm:5384 printer/printerdrake.pm:5467
#: standalone/printerdrake:75 standalone/printerdrake:590
#, fuzzy, c-format
msgid "Printerdrake"
msgstr "Прынтэр"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
#: printer/printerdrake.pm:4665
#, c-format
msgid "Reading printer data..."
msgstr ""

#: printer/printerdrake.pm:587
#, c-format
msgid "Restarting CUPS..."
msgstr ""

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""

#: printer/printerdrake.pm:622
#, fuzzy, c-format
msgid "Printer auto administration"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""

#: printer/printerdrake.pm:626
#, fuzzy, c-format
msgid "Do automatic configuration of new printers"
msgstr "Аўтаматычнае вызначэнне"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, c-format
msgid "when a USB printer is connected and turned on"
msgstr ""

#: printer/printerdrake.pm:630
#, fuzzy, c-format
msgid "when Printerdrake is started"
msgstr "Памеры якога раздзела вы жадаеце змяніць?"

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr ""

#: printer/printerdrake.pm:640
#, fuzzy, c-format
msgid "Re-enable disabled printers"
msgstr "Даступныя праграмы"

#: printer/printerdrake.pm:644
#, fuzzy, c-format
msgid "when the printing system is started"
msgstr "Змяніць тып раздзелу"

#: printer/printerdrake.pm:680
#, fuzzy, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr "Адлучэнне ад сеткі"

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""

#: printer/printerdrake.pm:686
#, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr ""

#: printer/printerdrake.pm:690
#, fuzzy, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr "Зрух мусіць быць станоўчым цэлым лікам!"

#: printer/printerdrake.pm:701
#, fuzzy, c-format
msgid "Do not disable the printer"
msgstr "Сервер друку"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr ""

#: printer/printerdrake.pm:707
#, fuzzy, c-format
msgid "Number of retries"
msgstr "2 кнопкі"

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr ""

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr "Выбар тыпу злучэння прынтэру"

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr "Як прынтар далучаны?"

#: printer/printerdrake.pm:748
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4911
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:772
#, fuzzy, c-format
msgid "The timeout must be a positive integer number!"
msgstr "Зрух мусіць быць станоўчым цэлым лікам!"

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr ""

#: printer/printerdrake.pm:829
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr "Імя друкаркі"

#: printer/printerdrake.pm:831
#, c-format
msgid "and %d unknown printers"
msgstr ""

#: printer/printerdrake.pm:835
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:837
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:838
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:842
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:843
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:846
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:849
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:863
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:865
#, fuzzy, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"

#: printer/printerdrake.pm:866
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:884
#, c-format
msgid "Do not setup printer automatically now, and never do it again"
msgstr ""

#: printer/printerdrake.pm:928
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Адшукаць файлы на дыску"

#: printer/printerdrake.pm:976
#, c-format
msgid "Do not setup printer automatically again"
msgstr ""

#: printer/printerdrake.pm:983
#, fuzzy, c-format
msgid "New printers found"
msgstr "Імя друкаркі"

#: printer/printerdrake.pm:984
#, fuzzy, c-format
msgid "New printer found"
msgstr "Імя друкаркі"

#: printer/printerdrake.pm:986
#, c-format
msgid ""
"The following new printers were found and Printerdrake can automatically set "
"them up for you. If you do not want to have all of them set up, unselect the "
"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
msgstr ""

#: printer/printerdrake.pm:987
#, c-format
msgid ""
"The following new printer was found and printerdrake can automatically set "
"it up for you. If you do not want to have it set up, unselect it, or click "
"\"Cancel\".\n"
msgstr ""

#: printer/printerdrake.pm:988
#, c-format
msgid ""
"Note that for certain printer models additional packages need to be "
"installed. So keep your installation media handy.\n"
msgstr ""

#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
#, fuzzy, c-format
msgid "Configuring printer on %s..."
msgstr "Настройка карт PCMCIA ..."

#: printer/printerdrake.pm:1049
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:1050
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
#, fuzzy, c-format
msgid "Printer model selection"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
#, fuzzy, c-format
msgid "Which printer model do you have?"
msgstr "Які тып карты вы маеце?"

#: printer/printerdrake.pm:1058
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4685
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Настройка карт PCMCIA ..."

#: printer/printerdrake.pm:1111
#, c-format
msgid ""
"Now you have turned off automatic printer setup.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1112
#, c-format
msgid ""
"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
"main menu. "
msgstr ""

#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4961
#, fuzzy, c-format
msgid "Configure Auto Administration"
msgstr "Сістэмнае адміністраваньне"

#: printer/printerdrake.pm:1113
#, c-format
msgid ""
"There you can also choose in which situation automatic printer setup is done "
"(On Printerdrake startup, on printing system startup, when connecting a new "
"USB printer)."
msgstr ""

#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
#: printer/printerdrake.pm:4928 printer/printerdrake.pm:5115
#, fuzzy, c-format
msgid "Add a new printer"
msgstr "Дадаць новы пункт"

#: printer/printerdrake.pm:1262
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: printer/printerdrake.pm:1275
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1292
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1301
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1352
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr ""

#: printer/printerdrake.pm:1355
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: printer/printerdrake.pm:1358
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:1361
#, fuzzy, c-format
msgid "No auto-detection"
msgstr "Аўтаматычнае вызначэнне"

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
#: printer/printerdrake.pm:2610
#, c-format
msgid "Could not install the %s packages!"
msgstr ""

#: printer/printerdrake.pm:1419
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, fuzzy, c-format
msgid "Printer auto-detection"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:1425
#, c-format
msgid "Detecting devices..."
msgstr "Вызначэнне прыладаў..."

#: printer/printerdrake.pm:1451
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1454
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1458
#, fuzzy, c-format
msgid "Detected %s"
msgstr "Выдаліць вылучаны радок"

#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
#: printer/printerdrake.pm:1505
#, c-format
msgid "Printer on parallel port #%s"
msgstr ""

#: printer/printerdrake.pm:1469
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Сеткавы прынтэр (TCP/Socket)"

#: printer/printerdrake.pm:1472
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1550
#, fuzzy, c-format
msgid "Local Printer"
msgstr "Лакальны прынтэр"

#: printer/printerdrake.pm:1551
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1555
#, c-format
msgid "You must enter a device or file name!"
msgstr ""

#: printer/printerdrake.pm:1565
#, fuzzy, c-format
msgid "No printer found!"
msgstr "Імя друкаркі"

#: printer/printerdrake.pm:1573
#, fuzzy, c-format
msgid "Local Printers"
msgstr "Лакальны прынтэр"

#: printer/printerdrake.pm:1574
#, fuzzy, c-format
msgid "Available printers"
msgstr "Даступныя праграмы"

#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
#, c-format
msgid "The following printer was auto-detected. "
msgstr ""

#: printer/printerdrake.pm:1580
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1581
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1584
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1585
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1590
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1593
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1594
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr ""

#: printer/printerdrake.pm:1596
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1597
#, fuzzy, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."

#: printer/printerdrake.pm:1599
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1603
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr ""

#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
#, fuzzy, c-format
msgid "Aborting"
msgstr "Адмяніць"

#: printer/printerdrake.pm:1679
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Опцыі аддаленага прынтэру lpd"

#: printer/printerdrake.pm:1680
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""

#: printer/printerdrake.pm:1681
#, fuzzy, c-format
msgid "Remote host name"
msgstr "Выкарыстаць выдалены хост"

#: printer/printerdrake.pm:1682
#, fuzzy, c-format
msgid "Remote printer name"
msgstr "Аддалены прынтэр"

#: printer/printerdrake.pm:1685
#, c-format
msgid "Remote host name missing!"
msgstr ""

#: printer/printerdrake.pm:1689
#, fuzzy, c-format
msgid "Remote printer name missing!"
msgstr "Аддалены прынтэр"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318 standalone/drakTermServ:447
#: standalone/drakTermServ:769 standalone/drakTermServ:785
#: standalone/drakTermServ:1591 standalone/drakTermServ:1600
#: standalone/drakTermServ:1614 standalone/drakbackup:512
#: standalone/drakbackup:618 standalone/drakbackup:653
#: standalone/drakbackup:754 standalone/draknfs:203
#: standalone/draksambashare:629 standalone/draksambashare:796
#: standalone/harddrake2:276
#, c-format
msgid "Information"
msgstr "Інфармацыя"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318
#, c-format
msgid "Detected model: %s %s"
msgstr ""

#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Scanning network..."
msgstr ""

#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Сервер друку"

#: printer/printerdrake.pm:1859
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Опцыі прынтэру SMB (Windows 9x/NT)"

#: printer/printerdrake.pm:1860
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""

#: printer/printerdrake.pm:1861
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1863
#, c-format
msgid "SMB server host"
msgstr "Імя сэерверу SMB"

#: printer/printerdrake.pm:1864
#, c-format
msgid "SMB server IP"
msgstr "IP сэервера SMB"

#: printer/printerdrake.pm:1865 standalone/draksambashare:67
#, c-format
msgid "Share name"
msgstr "Імя для размеркаванага рэсурсу"

#: printer/printerdrake.pm:1868
#, c-format
msgid "Workgroup"
msgstr "Працоўная група"

#: printer/printerdrake.pm:1870
#, fuzzy, c-format
msgid "Auto-detected"
msgstr "Аўтаматычны"

#: printer/printerdrake.pm:1880
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1884
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: printer/printerdrake.pm:1890
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: printer/printerdrake.pm:1891
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1901
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1904
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1983
#, c-format
msgid "NetWare Printer Options"
msgstr "Опцыі прынтэру NetWare"

#: printer/printerdrake.pm:1984
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""

#: printer/printerdrake.pm:1985
#, c-format
msgid "Printer Server"
msgstr "Сервер друку"

#: printer/printerdrake.pm:1986
#, c-format
msgid "Print Queue Name"
msgstr "Імя чаргі друку"

#: printer/printerdrake.pm:1991
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1995
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2122
#, fuzzy, c-format
msgid "TCP/Socket Printer Options"
msgstr "Опцыі прынтэру NetWare"

#: printer/printerdrake.pm:2124
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:2125
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""

#: printer/printerdrake.pm:2129
#, c-format
msgid "Printer host name or IP missing!"
msgstr ""

#: printer/printerdrake.pm:2158
#, c-format
msgid "Printer host name or IP"
msgstr ""

#: printer/printerdrake.pm:2221
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "Аднавіць сьпіс"

#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
#, c-format
msgid "Printer Device URI"
msgstr "URI прынтэру"

#: printer/printerdrake.pm:2225
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:2249
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:2354
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:2355
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2356
#, c-format
msgid "Command line"
msgstr "Загадны радок"

#: printer/printerdrake.pm:2360
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:2402
#, c-format
msgid "Your printer %s is currently connected %s."
msgstr ""

#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
#, fuzzy, c-format
msgid "to a parallel port"
msgstr "Друкаркі ў выглядзе значак"

#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
#, c-format
msgid "to the USB"
msgstr ""

#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
#, fuzzy, c-format
msgid "via the network"
msgstr "Далучэнне да сеткі"

#: printer/printerdrake.pm:2407
#, c-format
msgid "This type of connection is currently not fully supported by HPLIP."
msgstr ""

#: printer/printerdrake.pm:2409
#, c-format
msgid "You get full HPLIP support for your device if you connect it "
msgstr ""

#: printer/printerdrake.pm:2415
#, c-format
msgid ""
"You can now set up your device with HPLIP anyway (works in many cases), "
msgstr ""

#: printer/printerdrake.pm:2416
#, c-format
msgid "set it up without HPLIP (print-only), "
msgstr ""

#: printer/printerdrake.pm:2416
#, fuzzy, c-format
msgid "or"
msgstr "Гадзіна"

#: printer/printerdrake.pm:2417
#, c-format
msgid "cancel the setup (for example to reconnect your device)."
msgstr ""

#: printer/printerdrake.pm:2419
#, c-format
msgid ""
"You can always revise your choice by clicking your printer's entry in the "
"main window, "
msgstr ""

#: printer/printerdrake.pm:2420
#, c-format
msgid "clicking the \"%s\" button, "
msgstr ""

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302
#: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319
#: standalone/drakvpn:680 standalone/printerdrake:245
#, c-format
msgid "Edit"
msgstr "Рэдагаваць"

#: printer/printerdrake.pm:2421
#, c-format
msgid "and choosing \"%s\"."
msgstr ""

#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5311
#: printer/printerdrake.pm:5371
#, fuzzy, c-format
msgid "Printer connection type"
msgstr "Выбар тыпу злучэння прынтэру"

#: printer/printerdrake.pm:2423 standalone/logdrake:409
#, fuzzy, c-format
msgid "What do you want to do?"
msgstr "Які пратакол вы жадаеце выкарыстоўваць?"

#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
#, c-format
msgid "Set up with HPLIP"
msgstr ""

#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
#, c-format
msgid "Set up without HPLIP"
msgstr ""

#: printer/printerdrake.pm:2426
#, fuzzy, c-format
msgid "Cancel setup"
msgstr "Адмена"

#: printer/printerdrake.pm:2460
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2462
#, c-format
msgid ""
"To access these extra functions on HP printers they must be set up with "
"HPLIP (HP Linux Imaging and Printing). "
msgstr ""

#: printer/printerdrake.pm:2464
#, c-format
msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2490
#, c-format
msgid "Installing %s package..."
msgstr "Усталяванне пакету %s..."

#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
#: printer/printerdrake.pm:2524
#, fuzzy, c-format
msgid "HPLIP"
msgstr "PL_IP"

#: printer/printerdrake.pm:2497
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2512
#, fuzzy, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr "Немагчыма стварыць тэчку наладак gnome для карыстальніка \"%s\": %s\n"

#: printer/printerdrake.pm:2514
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2524
#, c-format
msgid "Checking device and configuring %s..."
msgstr ""

#: printer/printerdrake.pm:2544
#, fuzzy, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "На які сектар перанесці?"

#: printer/printerdrake.pm:2599
#, fuzzy, c-format
msgid "Installing SANE packages..."
msgstr "Усталяванне пакету %s"

#: printer/printerdrake.pm:2612
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2627
#, c-format
msgid "Using and Maintaining your %s"
msgstr ""

#: printer/printerdrake.pm:2641
#, fuzzy, c-format
msgid "Configuring device..."
msgstr "Настройка IDE"

#: printer/printerdrake.pm:2678
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
#: printer/printerdrake.pm:3115
#, c-format
msgid "Reading printer database..."
msgstr ""

#: printer/printerdrake.pm:2920
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: printer/printerdrake.pm:2937
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""

#: printer/printerdrake.pm:2946
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: printer/printerdrake.pm:2947
#, c-format
msgid "Name of printer"
msgstr "Імя друкаркі"

#: printer/printerdrake.pm:2948 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Description"
msgstr "Апісанне"

#: printer/printerdrake.pm:2949 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Location"
msgstr "Размеркаванне"

#: printer/printerdrake.pm:2967
#, fuzzy, c-format
msgid "Preparing printer database..."
msgstr "Падрыхтоўка загрузчыка"

#: printer/printerdrake.pm:3093
#, c-format
msgid "Your printer model"
msgstr ""

#: printer/printerdrake.pm:3094
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
#, fuzzy, c-format
msgid "The model is correct"
msgstr "Гэта дакладна?"

#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
#: printer/printerdrake.pm:3104
#, fuzzy, c-format
msgid "Select model manually"
msgstr "Пазначыць карыстальніцкі ID"

#: printer/printerdrake.pm:3128
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:3147
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:3179
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:3180
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:3181
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:3182
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:3183
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:3184
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:3186
#, c-format
msgid "Install PPD file from"
msgstr ""

#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "Фарматаваць гнуткія дыскі"

#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, fuzzy, c-format
msgid "Other place"
msgstr "Іншае"

#: printer/printerdrake.pm:3205
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "Абярыце файл"

#: printer/printerdrake.pm:3209
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:3215
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:3226
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "Усталёўваем"

#: printer/printerdrake.pm:3345
#, fuzzy, c-format
msgid "OKI winprinter configuration"
msgstr "Настройка прылд OSS"

#: printer/printerdrake.pm:3346
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
#, fuzzy, c-format
msgid "Lexmark inkjet configuration"
msgstr "Настройка proxy кэшуючых сэервераў"

#: printer/printerdrake.pm:3372
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3402
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3412
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "Канфігурацыя сеткі"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:3435
#, fuzzy, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "Настройка драйверу Sun"

#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:3462
#, fuzzy, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "Канфігурацыя"

#: printer/printerdrake.pm:3489
#, fuzzy, c-format
msgid "Canon LBP-810/1120 (CAPT) configuration"
msgstr "Канфігурацыя"

#: printer/printerdrake.pm:3490
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes or on the parallel "
"port. Please connect your printer to the USB or configure it on the machine "
"where it is directly connected to."
msgstr ""

#: printer/printerdrake.pm:3497
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3647
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3772
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:3779
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: printer/printerdrake.pm:3783
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: printer/printerdrake.pm:3787
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""

#: printer/printerdrake.pm:3855
#, fuzzy, c-format
msgid "Test pages"
msgstr "Гульня \"Сапёр\" для Gnome"

#: printer/printerdrake.pm:3856
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3860
#, c-format
msgid "No test pages"
msgstr ""

#: printer/printerdrake.pm:3861
#, c-format
msgid "Print"
msgstr "Друк"

#: printer/printerdrake.pm:3886
#, fuzzy, c-format
msgid "Standard test page"
msgstr "Стандартны"

#: printer/printerdrake.pm:3889
#, c-format
msgid "Alternative test page (Letter)"
msgstr ""

#: printer/printerdrake.pm:3892
#, fuzzy, c-format
msgid "Alternative test page (A4)"
msgstr "Друк тэставых старонак"

#: printer/printerdrake.pm:3894
#, fuzzy, c-format
msgid "Photo test page"
msgstr "Друк тэставых старонак"

#: printer/printerdrake.pm:3907
#, c-format
msgid "Printing test page(s)..."
msgstr "Друк тэставых старонак"

#: printer/printerdrake.pm:3927
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "Друк тэставых старонак"

#: printer/printerdrake.pm:3944
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3948
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""

#: printer/printerdrake.pm:3958
#, fuzzy, c-format
msgid "Did it work properly?"
msgstr "Сеткавы проксі"

#: printer/printerdrake.pm:3982
#, fuzzy, c-format
msgid "Raw printer"
msgstr "Лакальны прынтэр"

#: printer/printerdrake.pm:4004
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:4006
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
#: printer/printerdrake.pm:4036
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4016
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
#: printer/printerdrake.pm:4043
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: printer/printerdrake.pm:4041
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4045
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:4049
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: printer/printerdrake.pm:4058
#, fuzzy, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "Адлучэнне ад сеткі"

#: printer/printerdrake.pm:4059
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Адлучэнне ад сеткі"

#: printer/printerdrake.pm:4065
#, fuzzy, c-format
msgid "Print option list"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:4069
#, fuzzy, c-format
msgid "Printing option list..."
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:4087
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4090
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:4091
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4095
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""

#: printer/printerdrake.pm:4096
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4098
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:4099
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4102
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4103
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:4104
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:4105
#, fuzzy, c-format
msgid " - Print head alignment\n"
msgstr "Гарызантальнае раўнаньне"

#: printer/printerdrake.pm:4106
#, fuzzy, c-format
msgid " - Color calibration\n"
msgstr "Канфігурацыя"

#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
#: printer/printerdrake.pm:4209
#, fuzzy, c-format
msgid "Transfer printer configuration"
msgstr "Настройка драйверу Sun"

#: printer/printerdrake.pm:4148
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:4151
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:4153
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:4155
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:4157
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4158
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4159
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: printer/printerdrake.pm:4162
#, c-format
msgid "Do not transfer printers"
msgstr ""

#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
#, c-format
msgid "Transfer"
msgstr "Перадача"

#: printer/printerdrake.pm:4175
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:4196
#, fuzzy, c-format
msgid "New printer name"
msgstr "Сеткавы інтэрфейс"

#: printer/printerdrake.pm:4199
#, c-format
msgid "Transferring %s..."
msgstr ""

#: printer/printerdrake.pm:4210
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4220
#, c-format
msgid "Refreshing printer data..."
msgstr ""

#: printer/printerdrake.pm:4230
#, fuzzy, c-format
msgid "Starting network..."
msgstr "Пачатковы сектар:"

#: printer/printerdrake.pm:4273 printer/printerdrake.pm:4277
#: printer/printerdrake.pm:4279
#, fuzzy, c-format
msgid "Configure the network now"
msgstr "Настройка сеткі"

#: printer/printerdrake.pm:4274
#, c-format
msgid "Network functionality not configured"
msgstr ""

#: printer/printerdrake.pm:4275
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:4278
#, fuzzy, c-format
msgid "Go on without configuring the network"
msgstr "Далучэнне да сеткі"

#: printer/printerdrake.pm:4309
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""

#: printer/printerdrake.pm:4310
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:4320
#, c-format
msgid "Restarting printing system..."
msgstr ""

#: printer/printerdrake.pm:4351
#, fuzzy, c-format
msgid "high"
msgstr "Высокі"

#: printer/printerdrake.pm:4351
#, fuzzy, c-format
msgid "paranoid"
msgstr "Паранаідальны"

#: printer/printerdrake.pm:4353
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: printer/printerdrake.pm:4354
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:4390
#, c-format
msgid "Starting the printing system at boot time"
msgstr ""

#: printer/printerdrake.pm:4391
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:4414
#, c-format
msgid "Checking installed software..."
msgstr ""

#: printer/printerdrake.pm:4420
#, c-format
msgid "Removing %s..."
msgstr ""

#: printer/printerdrake.pm:4424
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "Немагчыма выдаліць тэг!"

#: printer/printerdrake.pm:4448
#, fuzzy, c-format
msgid "Installing %s..."
msgstr "Усталёўваем"

#: printer/printerdrake.pm:4452
#, c-format
msgid "Could not install the %s printing system!"
msgstr ""

#: printer/printerdrake.pm:4520
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4522
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4536
#, fuzzy, c-format
msgid "Name or IP of remote server:"
msgstr "Сервер друку"

#: printer/printerdrake.pm:4556
#, c-format
msgid "Setting Default Printer..."
msgstr ""

#: printer/printerdrake.pm:4576
#, fuzzy, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "Аддалены сэервер CUPS"

#: printer/printerdrake.pm:4577
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:4579
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:4580
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4581
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4583
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4584
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4585
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4587
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4591 printer/printerdrake.pm:4606
#: printer/printerdrake.pm:4610 printer/printerdrake.pm:4616
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4605
#, fuzzy, c-format
msgid "Local CUPS printing system"
msgstr "Настройка IDE"

#: printer/printerdrake.pm:4644
#, fuzzy, c-format
msgid "Select Printer Spooler"
msgstr "Выбар тыпу злучэння прынтэру"

#: printer/printerdrake.pm:4645
#, fuzzy, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Які пратакол вы жадаеце выкарыстоўваць?"

#: printer/printerdrake.pm:4694
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Немагчыма выдаліць \"%s\": %s."

#: printer/printerdrake.pm:4709
#, fuzzy, c-format
msgid "Installing Foomatic..."
msgstr "Усталёўваем"

#: printer/printerdrake.pm:4715
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4910
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""

#: printer/printerdrake.pm:4940
#, c-format
msgid "Display all available remote CUPS printers"
msgstr ""

#: printer/printerdrake.pm:4941
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: printer/printerdrake.pm:4952
#, fuzzy, c-format
msgid "CUPS configuration"
msgstr "Канфігурацыя"

#: printer/printerdrake.pm:4973
#, fuzzy, c-format
msgid "Change the printing system"
msgstr "Змяніць тып раздзелу"

#: printer/printerdrake.pm:4982
#, fuzzy, c-format
msgid "Normal Mode"
msgstr "Рэжым Mmap"

#: printer/printerdrake.pm:4983
#, fuzzy, c-format
msgid "Expert Mode"
msgstr "/Графік"

#: printer/printerdrake.pm:5261 printer/printerdrake.pm:5317
#: printer/printerdrake.pm:5403 printer/printerdrake.pm:5412
#, c-format
msgid "Printer options"
msgstr "Опцыі прынтэру"

#: printer/printerdrake.pm:5297
#, fuzzy, c-format
msgid "Modify printer configuration"
msgstr "Настройка запісу на дыск"

#: printer/printerdrake.pm:5299
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""

#: printer/printerdrake.pm:5304
#, fuzzy, c-format
msgid "This printer is disabled"
msgstr "Памеры якога раздзела вы жадаеце змяніць?"

#: printer/printerdrake.pm:5306
#, c-format
msgid "Do it!"
msgstr ""

#: printer/printerdrake.pm:5312 printer/printerdrake.pm:5377
#, c-format
msgid "Printer name, description, location"
msgstr ""

#: printer/printerdrake.pm:5314 printer/printerdrake.pm:5396
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr ""

#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
#, c-format
msgid "Printer manufacturer, model"
msgstr ""

#: printer/printerdrake.pm:5319 printer/printerdrake.pm:5407
#, c-format
msgid "Set this printer as the default"
msgstr ""

#: printer/printerdrake.pm:5324 printer/printerdrake.pm:5413
#: printer/printerdrake.pm:5415 printer/printerdrake.pm:5424
#, fuzzy, c-format
msgid "Enable Printer"
msgstr "Сервер друку"

#: printer/printerdrake.pm:5327 printer/printerdrake.pm:5418
#: printer/printerdrake.pm:5419 printer/printerdrake.pm:5421
#, fuzzy, c-format
msgid "Disable Printer"
msgstr "Сервер друку"

#: printer/printerdrake.pm:5331 printer/printerdrake.pm:5425
#, fuzzy, c-format
msgid "Printer communication error handling"
msgstr "Выбар тыпу злучэння прынтэру"

#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5429
#, fuzzy, c-format
msgid "Print test pages"
msgstr "Друк тэставых старонак"

#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5431
#, c-format
msgid "Learn how to use this printer"
msgstr ""

#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5433
#, fuzzy, c-format
msgid "Remove printer"
msgstr "Аддалены прынтэр"

#: printer/printerdrake.pm:5385
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr ""

#: printer/printerdrake.pm:5416
#, fuzzy, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "Сервер друку"

#: printer/printerdrake.pm:5422
#, fuzzy, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "Сервер друку"

#: printer/printerdrake.pm:5464
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Ці жадаеце выдаліць групу %s\n"

#: printer/printerdrake.pm:5468
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "Аддалены прынтэр"

#: printer/printerdrake.pm:5492
#, fuzzy, c-format
msgid "Default printer"
msgstr "Лакальны прынтэр"

#: printer/printerdrake.pm:5493
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: raid.pm:41
#, fuzzy, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d"

#: raid.pm:145
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Недастаткова раздзелаў для RAID узроўня %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, c-format
msgid "Scannerdrake"
msgstr ""

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr ""

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr ""

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:215
#, fuzzy, c-format
msgid "Security Alerts:"
msgstr "Бясьпека"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "Пароль для root"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, c-format
msgid "Set the user umask."
msgstr ""

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr ""

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "Уласьцівасьці акна"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "Настройка службаў"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, fuzzy, c-format
msgid "Enable IP spoofing protection"
msgstr "Дазволіць засцярогу ад абразання"

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, fuzzy, c-format
msgid "No password aging for"
msgstr "Няма паролю"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, fuzzy, c-format
msgid "Password history length"
msgstr "Настроіць паролі"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, fuzzy, c-format
msgid "Root umask"
msgstr "Пароль для root"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr ""

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "User umask"
msgstr "Карыстальнікі"

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr ""

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Сардэчна запрашаем у Crackers"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Зусім слабы"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Высокі"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Высокі"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Паранаідальны"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Гэты узровень неабходна выкарыстоўваць з асцярогай. Сістэма будзе прасцей\n"
"у карыстанні, але і больш чутнай: гэты узровень бяспекі нельга "
"выкарыстоўваць\n"
"на машынах, якія далучаны да сеткі ці да Інтернет. Уваход не абаронены "
"паролем."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасці сеткавага\n"
"таксама не рэкамендавана."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""

#: security/level.pm:55
#, fuzzy, c-format
msgid "DrakSec Basic Options"
msgstr "Пазначце параметры"

#: security/level.pm:57
#, fuzzy, c-format
msgid "Please choose the desired security level"
msgstr "калі ласка, пазначце тып вашай мышы."

#: security/level.pm:61
#, fuzzy, c-format
msgid "Security level"
msgstr "Бясьпека"

#: security/level.pm:63
#, c-format
msgid "Use libsafe for servers"
msgstr ""

#: security/level.pm:64
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:65
#, c-format
msgid "Security Administrator (login or email)"
msgstr ""

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron, перыядычны камандны планавальнік."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"ampd выкарыстоўваецца для адслежвання статусу батарэі і вядзення "
"статыстыкі.\n"
"Яго можна выкарыстоўваць для выключэння машыны пры нізкім зарадзе батарэі."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Каманды, якія выконваюцца, фіксуюцца па камандзе і часе яе выканання\n"
"і выконваюцца групы каманд, калі загрузка памяці ніжэй дастатковай."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron - стандартная UNIX праграма, якая выконвае праграмы карыстальніка\n"
"праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да "
"стандартнага\n"
"UNIX cron, уключаючы лепшы ўзровень бяспекі і моцныя канфігурацыйныя опцыі."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM дадае падтрымку мышы да праграмаў, якія працуюць у тэкставым рэжыме,\n"
"такіх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры "
"капіраванні і ўстаўцы,\n"
"і ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache - гэта World Wide Web сэервер. Ён выкарыстоўзваеца для абслугоўвання\n"
"HTML файлаў і CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Інтэрнэт суперсэервер-дэман (завецца inetd) запускае пры старце \n"
"колькасць розных інтэрнэт службаў, якія неабходны. Яго можна выкарыстоўваць "
"для пуску\n"
"шматлікіх службаў, уключаючы telnet, ftp, rsh і rlogin. Блакуючы inetd, "
"блакуем\n"
"усе службы, за якія ён адказвае."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Гэты пакет загружае абраную раскладку клавіятуры як набор з\n"
"/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай "
"kbdconfig.\n"
"Вы можаце зрабіць даступнай яе для шматлікіх машынаў."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n"
"сэервер, які кіруе працай прынтэру(аў)."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Манціраваць і разманціраваць усе сеткавыя файлавыя сістэмы (NFS),\n"
" SMB (Lan Manager/Windows) і NCP (Netware) пункты манціравання."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Актывізаваць/дэактывізаваць усе сеткавыя інтэрфейсы, сканфігураваныя для\n"
"старту пры загрузцы сістэмы."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткі.\n"
"Гэтая служба забяспечваецца NFS сэерверам, які канфігурыруеца праз\n"
"/etc/exports файл."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS -  гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n"
"сеткі. Гэтая служба ўплывае на наяўнасць сувязі паміж NFS файламі."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"Падтрымка PCMCIA - гэта звычайна падтрымка такіх рэчаў, як Ethernet і\n"
"мадэмы ў наўтбуках. Вам няма неабходнасці канфігураваць іх, калі на вашай\n"
"машыне іх няма, ці яна не наўтбук."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper (аглядальнік партоў) кіруе RPC злучэннямі, якія звычайна\n"
"выкарыстоўваюцца такімі пратаколамі як NFS і NIS. Portmap сэервер павінен "
"выконвацца\n"
"на машынах якія працуюць як сэерверы для пратаколаў, якія скарыстоўваюць RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Захаваць і аднавіць сістэмны энтрапійны пул для высокай якасці\n"
"генерацыі выпадковых лікаў."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Дэман маршрутызацыі дазваляе дынамічным табліцам IP маршрутызацыі\n"
"аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n"
"складаныя пратаколы маршрутызацыі - у вялікіх сетках."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Пратакол rstat дазваляе карыстальнікам сеткі атрымліваць\n"
"памеры нагрузкі для кожнай машыны сеткі."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Пратакол rusers дазваляе карыстальнікам сеткі вызначаць, хто\n"
"ўвайшоў і працуе на машынах ў сетцы."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"Пратакол rwho дае магчымасць карыстальнікам атрымаць спіс ўсіх\n"
"карыстальнікаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr ""

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog - гэта сродак, з дапамогай якога многія дэманы запісваюць "
"паведамленні\n"
"ў розныя файлы статыстыкі. Гэта вельмі добра для агляду працы розных службаў."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr ""

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr ""

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Абярыце, якія сервісы запускаць аўтаматычна пры загрузцы"

#: services.pm:127 standalone/draksambashare:111
#, c-format
msgid "Printing"
msgstr "Друкаваньне"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Інтэрнэт"

#: services.pm:131
#, fuzzy, c-format
msgid "File sharing"
msgstr "Мэнэджэр файлаў"

#: services.pm:138
#, fuzzy, c-format
msgid "Remote Administration"
msgstr "Сістэмнае адміністраваньне"

#: services.pm:146
#, fuzzy, c-format
msgid "Database Server"
msgstr "Праграма гуказапісу"

#: services.pm:209
#, fuzzy, c-format
msgid "running"
msgstr "Увага!"

#: services.pm:209
#, fuzzy, c-format
msgid "stopped"
msgstr "Далучыць"

#: services.pm:213
#, fuzzy, c-format
msgid "Services and daemons"
msgstr "Мэнэджэр сэрвісаў"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""

#: services.pm:224 ugtk2.pm:1009
#, c-format
msgid "Info"
msgstr "Інфармацыя"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:227
#, fuzzy, c-format
msgid "On boot"
msgstr "Yaboot"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "У пачатак"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Спыніць"

#: share/advertising/01.pl:3
#, c-format
msgid "Mandriva Linux 2006: Packs"
msgstr ""

#: share/advertising/02.pl:3
#, c-format
msgid "Mandriva Linux 2006: More features"
msgstr ""

#: share/advertising/03.pl:3
#, c-format
msgid "Interactive firewall"
msgstr ""

#: share/advertising/04.pl:3
#, c-format
msgid "Desktop search"
msgstr ""

#: share/advertising/05.pl:3
#, c-format
msgid "New package manager"
msgstr ""

#: share/advertising/06.pl:3
#, c-format
msgid "Mandriva Linux 2006: More performances"
msgstr ""

#: share/advertising/07.pl:3
#, c-format
msgid "Latest kernel and GCC"
msgstr ""

#: share/advertising/08.pl:3
#, c-format
msgid "High Availibility"
msgstr ""

#: share/advertising/09.pl:3
#, c-format
msgid "Delta RPM"
msgstr ""

#: share/advertising/10.pl:3
#, c-format
msgid "Low resources setup"
msgstr ""

#: share/advertising/11.pl:3
#, c-format
msgid "Boot time reduction"
msgstr ""

#: share/advertising/12.pl:3
#, c-format
msgid "Mandriva Linux 2006: Easier to use"
msgstr ""

#: share/advertising/13.pl:3
#, c-format
msgid "Latest graphical interfaces: KDE and GNOME"
msgstr ""

#: share/advertising/14.pl:3
#, c-format
msgid "auto-installation servers"
msgstr ""

#: share/advertising/15.pl:3
#, c-format
msgid "Easy and quick installation"
msgstr ""

#: share/advertising/16.pl:3
#, c-format
msgid "Easy configuration thanks to 60 wizards"
msgstr ""

#: share/advertising/17.pl:3
#, c-format
msgid "Look and feel improved"
msgstr ""

#: share/advertising/18.pl:3
#, c-format
msgid "New webmin theme"
msgstr ""

#: share/advertising/19.pl:3
#, c-format
msgid "Mandriva Linux 2006: More support"
msgstr ""

#: share/advertising/20.pl:3
#, c-format
msgid "Better Hardware support"
msgstr ""

#: share/advertising/21.pl:3
#, c-format
msgid "Xen support"
msgstr ""

#: share/advertising/22.pl:3
#, c-format
msgid "Mandriva Linux 2006: More information"
msgstr ""

#: share/advertising/23.pl:3
#, c-format
msgid "Mandriva Linux 2006: Where to buy?"
msgstr ""

#: share/advertising/24.pl:3
#, c-format
msgid "Where to find technical assistance?"
msgstr ""

#: share/advertising/25.pl:3
#, c-format
msgid "How to join the Mandriva Linux community?"
msgstr ""

#: share/advertising/26.pl:3
#, c-format
msgid "How to maintain your system up-to-date?"
msgstr ""

#: share/advertising/intel.pl:3
#, c-format
msgid "Intel Software"
msgstr ""

#: share/advertising/skype.pl:3
#, c-format
msgid "Skype lets you make calls through the Internet for free."
msgstr ""

#: share/compssUsers.pl:26
#, fuzzy, c-format
msgid "Office Workstation"
msgstr "Працоўныя мейсцы"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"Офісныя праграмы: працэсары словаў (OpenOffice.org Writer, Kword), "
"электроныя табліцы, аглядальнікі pdf-файлаў, і г.д."

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Офісныя праграмы: працэсары словаў (kword, abiword), электроныя табліцы, "
"аглядальнікі pdf-файлаў, і г.д."

#: share/compssUsers.pl:34
#, fuzzy, c-format
msgid "Game station"
msgstr "Аўтэнтыфікацыя"

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Забаўляльныя праграмы: аркады, стратэгіі і г.д."

#: share/compssUsers.pl:38
#, fuzzy, c-format
msgid "Multimedia station"
msgstr "Мульцімедыя"

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "Рэдактары і прайгравальнікі гуку і відэа"

#: share/compssUsers.pl:44
#, fuzzy, c-format
msgid "Internet station"
msgstr "Інтэрнэт"

#: share/compssUsers.pl:45
#, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""

#: share/compssUsers.pl:50
#, fuzzy, c-format
msgid "Network Computer (client)"
msgstr "Сеткавы прынтэр (TCP/Socket)"

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr ""

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "Канфігурацыя"

#: share/compssUsers.pl:56
#, fuzzy, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "Ці жадаеце пратэсціраваць настройкі?"

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr "Кансольныя інструментальныя сродкі"

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "Рэдактары, абалонкі, тэрміналы"

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "Бібліятэкі і праграмы для распрацоўкі на С і С++"

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "Дакумэнтацыя"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "нігі і Howto па Linux і Free Software"

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr ""

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: share/compssUsers.pl:86
#, fuzzy, c-format
msgid "Apache"
msgstr "Шлях:"

#: share/compssUsers.pl:89
#, fuzzy, c-format
msgid "Groupware"
msgstr "Групы"

#: share/compssUsers.pl:90
#, fuzzy, c-format
msgid "Kolab Server"
msgstr "NIS сэервер:"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, fuzzy, c-format
msgid "Firewall/Router"
msgstr "Рэстарт"

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, fuzzy, c-format
msgid "Internet gateway"
msgstr "Інтэрнэт"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/Файл/_Стварыць"

#: share/compssUsers.pl:98
#, c-format
msgid "Postfix mail server, Inn news server"
msgstr ""

#: share/compssUsers.pl:101
#, fuzzy, c-format
msgid "Directory Server"
msgstr "Каталог %s Так"

#: share/compssUsers.pl:105
#, fuzzy, c-format
msgid "FTP Server"
msgstr "NIS сэервер:"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:109
#, c-format
msgid "DNS/NIS"
msgstr ""

#: share/compssUsers.pl:110
#, fuzzy, c-format
msgid "Domain Name and Network Information Server"
msgstr "Імя дамену"

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "File and Printer Sharing Server"
msgstr "Сервер друку"

#: share/compssUsers.pl:114
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "X сэервер"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "База даньняў"

#: share/compssUsers.pl:118
#, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr ""

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr ""

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr ""

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "Пошта"

#: share/compssUsers.pl:127
#, c-format
msgid "Postfix mail server"
msgstr ""

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: share/compssUsers.pl:138
#, fuzzy, c-format
msgid "Network Computer server"
msgstr "Сеткавыя інтэрфэйсы"

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: share/compssUsers.pl:147
#, fuzzy, c-format
msgid "KDE Workstation"
msgstr "Канфігурацыя"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"The K Desktop Environment - асноўнае графічнае асяродзе з калекцыяй "
"інструментальных сродкаў"

#: share/compssUsers.pl:152
#, fuzzy, c-format
msgid "GNOME Workstation"
msgstr "Інфармацыя аб памяці"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Графічнае асяродзе са зручным дзеля выкарыстання наборам прыкладанняў і  "
"інструментальных сродкаў"

#: share/compssUsers.pl:156
#, fuzzy, c-format
msgid "IceWm Desktop"
msgstr "Працоўны стол"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "Іншыя графічныя Працоўныя сталы"

#: share/compssUsers.pl:161
#, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr "Карыснасьці"

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
#, fuzzy, c-format
msgid "SSH Server"
msgstr "NIS сэервер:"

#: share/compssUsers.pl:191
#, fuzzy, c-format
msgid "Webmin"
msgstr "Прылады"

#: share/compssUsers.pl:192
#, fuzzy, c-format
msgid "Webmin Remote Configuration Server"
msgstr "Сістэмнае адміністраваньне"

#: share/compssUsers.pl:196
#, fuzzy, c-format
msgid "Network Utilities/Monitoring"
msgstr "Канфігурацыя сеткі"

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:201
#, fuzzy, c-format
msgid "Mandriva Wizards"
msgstr "Цэнтар кіраваньня"

#: share/compssUsers.pl:202
#, fuzzy, c-format
msgid "Wizards to configure server"
msgstr "Немагчыма выдаліць \"%s\": %s."

#: standalone.pm:21
#, fuzzy, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Пашырэнне ESounD\n"
"\n"
" Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць "
"і/альбо мадыфікаваць яго\n"
"у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n"
"Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца "
"версыяй 2 ліцэнзыі альбо\n"
"(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n"
"\n"
"Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n"
"але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n"
"ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n"
"за падрабязнасцямі глянце на GNU ліцэнзыю.\n"
"\n"
"А копію ліцэнзыі вы павінны былі атрымаць\n"
"разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n"
"Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
"02111-1307,\n"
"USA."

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, fuzzy, c-format
msgid "[keyboard]"
msgstr "Клавіятура"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:146
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:59
#, fuzzy, c-format
msgid "You need to reboot for changes to take effect"
msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца"

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Калі ласка, выйдзіце, а потым скарыстайце Ctrl-Alt-BackSpace"

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:102 standalone/drakTermServ:108
#, fuzzy, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: параметр ‛%s’ патрабуе аргумент\n"

#: standalone/drakTermServ:119
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:125
#, fuzzy, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: параметр ‛%s’ патрабуе аргумент\n"

#: standalone/drakTermServ:207 standalone/drakTermServ:210
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "Сістэмнае адміністраваньне"

#: standalone/drakTermServ:216
#, fuzzy, c-format
msgid "dhcpd Config"
msgstr "Настройка IDE"

#: standalone/drakTermServ:220
#, fuzzy, c-format
msgid "Enable Server"
msgstr "Сервер друку"

#: standalone/drakTermServ:226
#, fuzzy, c-format
msgid "Disable Server"
msgstr "Сервер друку"

#: standalone/drakTermServ:232
#, fuzzy, c-format
msgid "Start Server"
msgstr "NIS сэервер:"

#: standalone/drakTermServ:238
#, fuzzy, c-format
msgid "Stop Server"
msgstr "Праграма гуказапісу"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:258
#, fuzzy, c-format
msgid "Add/Del Users"
msgstr "Дадаць карыстальніка"

#: standalone/drakTermServ:262
#, fuzzy, c-format
msgid "Add/Del Clients"
msgstr "Калькулятар"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "Выявы"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:289 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr ""

#: standalone/drakTermServ:326 standalone/drakTermServ:327
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:333
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:379
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "Адмена"

#: standalone/drakTermServ:394
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:422
#, c-format
msgid "Use thin clients."
msgstr ""

#: standalone/drakTermServ:424
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:426
#, c-format
msgid ""
"Please select default client type (Fat is the default type if 'Use thin' is "
"unchecked).\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:446
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:447 standalone/drakTermServ:769
#: standalone/drakTermServ:785
#, c-format
msgid "This will take a few minutes."
msgstr ""

#: standalone/drakTermServ:453 standalone/drakTermServ:493
#, fuzzy, c-format
msgid "Done!"
msgstr "Зроблена"

#: standalone/drakTermServ:464 standalone/drakTermServ:849
#, c-format
msgid "%s failed"
msgstr ""

#: standalone/drakTermServ:473
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""

#: standalone/drakTermServ:479
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:499
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:534
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Сістэмнае адміністраваньне"

#: standalone/drakTermServ:535
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:541
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:559
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:579
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:591
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:595
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:600
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:609
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:630
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:663
#, c-format
msgid "Boot Floppy"
msgstr ""

#: standalone/drakTermServ:665
#, fuzzy, c-format
msgid "Boot ISO"
msgstr "Манітор"

#: standalone/drakTermServ:667
#, fuzzy, c-format
msgid "PXE Image"
msgstr "Вобраз"

#: standalone/drakTermServ:728
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "Скура Па ўмаўчанні"

#: standalone/drakTermServ:731
#, c-format
msgid "Create PXE images."
msgstr ""

#: standalone/drakTermServ:757
#, c-format
msgid "Install i586 kernel for older clients"
msgstr ""

#: standalone/drakTermServ:767
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: standalone/drakTermServ:774
#, fuzzy, c-format
msgid "No kernel selected!"
msgstr "Няма вузла каб выдаліць"

#: standalone/drakTermServ:777
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:781 standalone/drakTermServ:1581
#, c-format
msgid "No NIC selected!"
msgstr ""

#: standalone/drakTermServ:784
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: standalone/drakTermServ:797
#, fuzzy, c-format
msgid "<-- Delete"
msgstr "Знішчыць"

#: standalone/drakTermServ:802
#, fuzzy, c-format
msgid "No image selected!"
msgstr "Няма вузла каб выдаліць"

#: standalone/drakTermServ:805
#, c-format
msgid "Delete All NBIs"
msgstr ""

#: standalone/drakTermServ:880
#, c-format
msgid "Building images for kernel:"
msgstr ""

#: standalone/drakTermServ:1004
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:1009
#, fuzzy, c-format
msgid "Add User -->"
msgstr "Дадаць карыстальніка"

#: standalone/drakTermServ:1015
#, c-format
msgid "<-- Del User"
msgstr ""

#: standalone/drakTermServ:1051
#, fuzzy, c-format
msgid "type: %s"
msgstr "Тып: "

#: standalone/drakTermServ:1055
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:1086
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/drakTermServ:1095
#, c-format
msgid "No net boot images created!"
msgstr ""

#: standalone/drakTermServ:1114
#, fuzzy, c-format
msgid "Thin Client"
msgstr "Калькулятар"

#: standalone/drakTermServ:1118
#, c-format
msgid "Allow Thin Clients"
msgstr ""

#: standalone/drakTermServ:1119
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1120
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:1134
#, fuzzy, c-format
msgid "type: fat"
msgstr "Тып: "

#: standalone/drakTermServ:1135
#, fuzzy, c-format
msgid "type: thin"
msgstr "Тып: "

#: standalone/drakTermServ:1142
#, c-format
msgid "local config: false"
msgstr ""

#: standalone/drakTermServ:1143
#, c-format
msgid "local config: true"
msgstr ""

#: standalone/drakTermServ:1151
#, fuzzy, c-format
msgid "<-- Edit Client"
msgstr "Калькулятар"

#: standalone/drakTermServ:1176
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1183
#, fuzzy, c-format
msgid "Delete Client"
msgstr "Выдаліць пункт"

#: standalone/drakTermServ:1205
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1250
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1266
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1300
#, fuzzy, c-format
msgid "Subnet:"
msgstr "Сіні"

#: standalone/drakTermServ:1307
#, fuzzy, c-format
msgid "Netmask:"
msgstr "Маска сеткі"

#: standalone/drakTermServ:1314
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1321
#, c-format
msgid "Subnet Mask:"
msgstr ""

#: standalone/drakTermServ:1328
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1335
#, fuzzy, c-format
msgid "Domain Name:"
msgstr "Імя дамену"

#: standalone/drakTermServ:1343
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "NIS сэервер:"

#: standalone/drakTermServ:1354
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1355
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1397
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1399
#, fuzzy, c-format
msgid "Write Config"
msgstr "Канфігурацыя"

#: standalone/drakTermServ:1415
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/drakTermServ:1416
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1419
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""

#: standalone/drakTermServ:1572
#, c-format
msgid "Write to %s failed!"
msgstr ""

#: standalone/drakTermServ:1585
#, c-format
msgid "Please insert floppy disk:"
msgstr ""

#: standalone/drakTermServ:1589
#, c-format
msgid "Could not access the floppy!"
msgstr ""

#: standalone/drakTermServ:1591
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: standalone/drakTermServ:1594
#, fuzzy, c-format
msgid "No floppy drive available!"
msgstr "Дыскавод недаступны"

#: standalone/drakTermServ:1600
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1602
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "Памылка запісу ў файл %s"

#: standalone/drakTermServ:1614
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1618
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1638
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1797
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1810
#, c-format
msgid "%s is not a user..\n"
msgstr ""

#: standalone/drakTermServ:1811
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1813
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1815
#, fuzzy, c-format
msgid "%s added to Terminal Server\n"
msgstr "Сістэмнае адміністраваньне"

#: standalone/drakTermServ:1832
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "Выдаліць"

#: standalone/drakTermServ:1834 standalone/drakTermServ:1907
#, c-format
msgid "%s not found...\n"
msgstr ""

#: standalone/drakTermServ:1935
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:2075
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38 standalone/drakhosts:123
#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
#: standalone/draknfs:546 standalone/draksambashare:187
#: standalone/draksambashare:208 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Error!"
msgstr "Памылка!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, fuzzy, c-format
msgid "Auto Install Configurator"
msgstr "Настройка пасля ўсталявання"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, fuzzy, c-format
msgid "replay"
msgstr "Граць"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, fuzzy, c-format
msgid "manual"
msgstr "Студзень"

#: standalone/drakautoinst:64
#, fuzzy, c-format
msgid "Automatic Steps Configuration"
msgstr "Канфігурацыя MIDI"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, fuzzy, c-format
msgid "Creating auto install floppy"
msgstr "Стварэнне дыскеты для ўсталявання"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Устаўце дыскету ў дыскавод %s"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Стварэнне дыскеты для ўсталявання"

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:287
#, fuzzy, c-format
msgid "Auto Install"
msgstr "Усталёўка"

#: standalone/drakautoinst:356
#, fuzzy, c-format
msgid "Add an item"
msgstr "Дадаць атрыбут"

#: standalone/drakautoinst:363
#, fuzzy, c-format
msgid "Remove the last item"
msgstr "/Выдаліць дохлыя файлы"

#: standalone/drakbackup:156
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Star should be selected if you want to backup EA or ACLs, otherwise choose "
"tar"
msgstr ""

#: standalone/drakbackup:163
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server. Multiple "
"users can be in a comma seperated list"
msgstr ""

#: standalone/drakbackup:164
#, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""

#: standalone/drakbackup:165
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:166
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:167
#, c-format
msgid ""
"Selecting this option allows you to view the raw output from the restore "
"process, after a file restore."
msgstr ""

#: standalone/drakbackup:168
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:169
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:343
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:347
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:393
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:477 standalone/logdrake:440
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:481 standalone/logdrake:445
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:491
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:493
#, fuzzy, c-format
msgid "Old user list:\n"
msgstr "Атрымаць спіс сервакоў"

#: standalone/drakbackup:495
#, fuzzy, c-format
msgid "New user list:\n"
msgstr "Атрымаць спіс сервакоў"

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr ""

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "Немагчыма зачыніць каталёг: %s"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:643
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "Няма паролю"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:645
#, fuzzy, c-format
msgid "Can not find %s on %s"
msgstr "Не знойздены праграмы\n"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:703
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:707
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:712
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:754
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:812
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: standalone/drakbackup:839
#, fuzzy, c-format
msgid "No tape in %s!"
msgstr "Дапаўненьні"

#: standalone/drakbackup:948
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:968 standalone/drakbackup:1000
#, c-format
msgid "Backup system files..."
msgstr ""

#: standalone/drakbackup:1001 standalone/drakbackup:1040
#, fuzzy, c-format
msgid "Hard Disk Backup files..."
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:1039
#, fuzzy, c-format
msgid "Backup User files..."
msgstr "Зададзена карыстальнікам..."

#: standalone/drakbackup:1073
#, fuzzy, c-format
msgid "Backup Other files..."
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:1074
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1079
#, c-format
msgid "No changes to backup!"
msgstr ""

#: standalone/drakbackup:1095 standalone/drakbackup:1117
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1104
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1105
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1107
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1122
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1127
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1136
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1137
#, fuzzy, c-format
msgid " Error while sending mail. \n"
msgstr ""
"Памылка аналіза\n"
" канфігурацыйнага файла."

#: standalone/drakbackup:1167
#, fuzzy, c-format
msgid "Can not create catalog!"
msgstr "Немагчыма запісаць тэг!"

#: standalone/drakbackup:1321
#, fuzzy, c-format
msgid "Problem installing %s"
msgstr "Праблемы з усталяваннем пакету %s"

#: standalone/drakbackup:1409
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr ""

#: standalone/drakbackup:1410 standalone/drakbackup:1473
#: standalone/drakbackup:1539
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, fuzzy, c-format
msgid "Use Incremental Backups"
msgstr "Інструмэнтальны Рок"

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1414
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1445
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""

#: standalone/drakbackup:1472
#, fuzzy, c-format
msgid "Do not include the browser cache"
msgstr "Настроіць проксі сэрвэры"

#: standalone/drakbackup:1526
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr ""

#: standalone/drakbackup:1527 standalone/drakfont:657
#, fuzzy, c-format
msgid "Remove Selected"
msgstr "/Выдаліць/Выбранае"

#: standalone/drakbackup:1590
#, c-format
msgid "Users"
msgstr "Карыстальнікі"

#: standalone/drakbackup:1610
#, c-format
msgid "Use network connection to backup"
msgstr ""

#: standalone/drakbackup:1612
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1616
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1617
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1619
#, c-format
msgid "Transfer Now"
msgstr ""

#: standalone/drakbackup:1621
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1624
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "Імя машыны"

#: standalone/drakbackup:1629
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1641
#, c-format
msgid "Remember this password"
msgstr "Запомніць гэты пароль"

#: standalone/drakbackup:1653
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1744
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1747
#, c-format
msgid "Choose your CD/DVD device"
msgstr ""

#: standalone/drakbackup:1752
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "Выберыце ваш стыль меню :"

#: standalone/drakbackup:1759
#, c-format
msgid "Multisession CD"
msgstr ""

#: standalone/drakbackup:1761
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1767
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr ""

#: standalone/drakbackup:1768
#, c-format
msgid " Erase Now "
msgstr ""

#: standalone/drakbackup:1774
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1776
#, c-format
msgid "DVD-R media"
msgstr ""

#: standalone/drakbackup:1778
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "CD-ROM прылада"

#: standalone/drakbackup:1809
#, c-format
msgid "No CD device defined!"
msgstr ""

#: standalone/drakbackup:1851
#, c-format
msgid "Use tape to backup"
msgstr ""

#: standalone/drakbackup:1854
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1860
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1866
#, c-format
msgid "Use tape hardware compression (EXPERIMENTAL)"
msgstr ""

#: standalone/drakbackup:1872
#, c-format
msgid "Do not rewind tape after backup"
msgstr ""

#: standalone/drakbackup:1878
#, c-format
msgid "Erase tape before backup"
msgstr ""

#: standalone/drakbackup:1884
#, c-format
msgid "Eject tape after the backup"
msgstr ""

#: standalone/drakbackup:1965
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "Выбраць каталог для дадатку"

#: standalone/drakbackup:1969
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "Каталог %s Так"

#: standalone/drakbackup:1974
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""

#: standalone/drakbackup:1978
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""

#: standalone/drakbackup:2045
#, c-format
msgid "CD-R / DVD-R"
msgstr ""

#: standalone/drakbackup:2050
#, fuzzy, c-format
msgid "HardDrive / NFS"
msgstr "Мальды"

#: standalone/drakbackup:2065 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, fuzzy, c-format
msgid "hourly"
msgstr "Кантры"

#: standalone/drakbackup:2065 standalone/drakbackup:2067
#: standalone/drakbackup:2072
#, fuzzy, c-format
msgid "daily"
msgstr "Электронная пошта"

#: standalone/drakbackup:2065 standalone/drakbackup:2068
#: standalone/drakbackup:2073
#, c-format
msgid "weekly"
msgstr ""

#: standalone/drakbackup:2065 standalone/drakbackup:2069
#: standalone/drakbackup:2074
#, fuzzy, c-format
msgid "monthly"
msgstr "Месяц"

#: standalone/drakbackup:2065 standalone/drakbackup:2070
#: standalone/drakbackup:2075
#, c-format
msgid "custom"
msgstr "карыстальнік"

#: standalone/drakbackup:2079
#, c-format
msgid "January"
msgstr "Студзень"

#: standalone/drakbackup:2079
#, c-format
msgid "February"
msgstr "Люты"

#: standalone/drakbackup:2079
#, c-format
msgid "March"
msgstr "Сакавік"

#: standalone/drakbackup:2080
#, c-format
msgid "April"
msgstr "Красавік"

#: standalone/drakbackup:2080
#, c-format
msgid "May"
msgstr "Травень"

#: standalone/drakbackup:2080
#, c-format
msgid "June"
msgstr "Чэрвень"

#: standalone/drakbackup:2080
#, c-format
msgid "July"
msgstr "Ліпень"

#: standalone/drakbackup:2080
#, c-format
msgid "August"
msgstr "Жнівень"

#: standalone/drakbackup:2080
#, c-format
msgid "September"
msgstr "Верасень"

#: standalone/drakbackup:2081
#, c-format
msgid "October"
msgstr "Кастрычнік"

#: standalone/drakbackup:2081
#, c-format
msgid "November"
msgstr "Лістапад"

#: standalone/drakbackup:2081
#, c-format
msgid "December"
msgstr "Сьнежань"

#: standalone/drakbackup:2084
#, c-format
msgid "Sunday"
msgstr "Нядзеля"

#: standalone/drakbackup:2084
#, c-format
msgid "Monday"
msgstr "Панядзелак"

#: standalone/drakbackup:2084
#, c-format
msgid "Tuesday"
msgstr "Аўторак"

#: standalone/drakbackup:2085
#, c-format
msgid "Wednesday"
msgstr "Серада"

#: standalone/drakbackup:2085
#, c-format
msgid "Thursday"
msgstr "Чацьвер"

#: standalone/drakbackup:2085
#, c-format
msgid "Friday"
msgstr "Пятніца"

#: standalone/drakbackup:2085
#, c-format
msgid "Saturday"
msgstr "Субота"

#: standalone/drakbackup:2115
#, fuzzy, c-format
msgid "Delete cron entry"
msgstr "Выдаліць пункт"

#: standalone/drakbackup:2116
#, fuzzy, c-format
msgid "Add cron entry"
msgstr "Прынтэр"

#: standalone/drakbackup:2174
#, fuzzy, c-format
msgid "Use daemon"
msgstr "Імя карыстальніка"

#: standalone/drakbackup:2178
#, c-format
msgid "Please choose the time interval between each backup"
msgstr ""

#: standalone/drakbackup:2186
#, c-format
msgid "Minute"
msgstr "Хвіліна"

#: standalone/drakbackup:2190
#, c-format
msgid "Hour"
msgstr "Гадзіна"

#: standalone/drakbackup:2194
#, c-format
msgid "Day"
msgstr "Дзень"

#: standalone/drakbackup:2198
#, c-format
msgid "Month"
msgstr "Месяц"

#: standalone/drakbackup:2202
#, fuzzy, c-format
msgid "Weekday (start)"
msgstr "Серада"

#: standalone/drakbackup:2206
#, fuzzy, c-format
msgid "Weekday (end)"
msgstr "Серада"

#: standalone/drakbackup:2210
#, fuzzy, c-format
msgid "Profile"
msgstr "Профілі"

#: standalone/drakbackup:2216
#, fuzzy, c-format
msgid "Current crontab:"
msgstr "Прыняць карыстальніка"

#: standalone/drakbackup:2224
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr "Калі ласка, абярыце тып клавіятуры."

#: standalone/drakbackup:2228
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""

#: standalone/drakbackup:2229
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "Please choose the archive program"
msgstr "Калі ласка, абярыце тып клавіятуры."

#: standalone/drakbackup:2298
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "калі ласка, пазначце тып вашай мышы."

#: standalone/drakbackup:2302
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:2304
#, c-format
msgid "Send mail report after each backup to:"
msgstr ""

#: standalone/drakbackup:2310
#, c-format
msgid "Return address for sent mail:"
msgstr ""

#: standalone/drakbackup:2316
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "Інфармацыя аб X-сэрвэры"

#: standalone/drakbackup:2320
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2321
#, c-format
msgid "View restore log after file restore."
msgstr ""

#: standalone/drakbackup:2366
#, c-format
msgid "What"
msgstr ""

#: standalone/drakbackup:2371
#, c-format
msgid "Where"
msgstr "Дзе"

#: standalone/drakbackup:2376
#, fuzzy, c-format
msgid "When"
msgstr "З колам"

#: standalone/drakbackup:2381
#, c-format
msgid "More Options"
msgstr "Болей выбараў"

#: standalone/drakbackup:2394
#, c-format
msgid "Backup destination not configured..."
msgstr ""

#: standalone/drakbackup:2414 standalone/drakbackup:4339
#, fuzzy, c-format
msgid "Drakbackup Configuration"
msgstr "Канфігурацыя"

#: standalone/drakbackup:2430
#, fuzzy, c-format
msgid "Please choose where you want to backup"
msgstr "калі ласка, пазначце тып вашай мышы."

#: standalone/drakbackup:2433
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2433
#, fuzzy, c-format
msgid "Across Network"
msgstr "Сетка"

#: standalone/drakbackup:2433
#, c-format
msgid "On CD-R"
msgstr ""

#: standalone/drakbackup:2433
#, fuzzy, c-format
msgid "On Tape Device"
msgstr "USB прылады"

#: standalone/drakbackup:2479
#, fuzzy, c-format
msgid "Backup Users"
msgstr "Карыстальнікі групы"

#: standalone/drakbackup:2480
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr " (Па дамаўленню)"

#: standalone/drakbackup:2493
#, fuzzy, c-format
msgid "Please choose what you want to backup"
msgstr "калі ласка, пазначце тып вашай мышы."

#: standalone/drakbackup:2494
#, fuzzy, c-format
msgid "Backup System"
msgstr "Сыстэма"

#: standalone/drakbackup:2496
#, fuzzy, c-format
msgid "Select user manually"
msgstr "Пазначыць карыстальніцкі ID"

#: standalone/drakbackup:2525
#, c-format
msgid "Please select data to backup..."
msgstr ""

#: standalone/drakbackup:2597
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2598
#, fuzzy, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr "Сыстэма"

#: standalone/drakbackup:2600
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2604
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2605
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2606
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr ""

#: standalone/drakbackup:2609
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2614
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2615
#, c-format
msgid "RW"
msgstr ""

#: standalone/drakbackup:2616
#, fuzzy, c-format
msgid " on device: %s"
msgstr "Мыш: %s\n"

#: standalone/drakbackup:2617
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2618
#, fuzzy, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"%s\n"
"Немагчыма адчыніць файл: %s"

#: standalone/drakbackup:2619
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2621
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2623
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2624
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2625
#, fuzzy, c-format
msgid ""
"\n"
"- Options:\n"
msgstr "Опцыі:"

#: standalone/drakbackup:2626
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2628
#, c-format
msgid "\tBackups use %s and bzip2\n"
msgstr ""

#: standalone/drakbackup:2629
#, c-format
msgid "\tBackups use %s and gzip\n"
msgstr ""

#: standalone/drakbackup:2630
#, fuzzy, c-format
msgid "\tBackups use %s only\n"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:2632
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:2633
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2634
#, c-format
msgid "\tSend mail from %s\n"
msgstr ""

#: standalone/drakbackup:2635
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr ""

#: standalone/drakbackup:2637
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2638
#, fuzzy, c-format
msgid "\t-Hard drive.\n"
msgstr "Мальды"

#: standalone/drakbackup:2639
#, c-format
msgid "\t-CD-R.\n"
msgstr ""

#: standalone/drakbackup:2640
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2641
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2642
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2643
#, fuzzy, c-format
msgid "\t-Network by rsync.\n"
msgstr "Сеткавы проксі"

#: standalone/drakbackup:2645
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2650
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2652
#, c-format
msgid "- Restore System Files.\n"
msgstr ""

#: standalone/drakbackup:2654 standalone/drakbackup:2664
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2657
#, c-format
msgid "- Restore User Files: \n"
msgstr ""

#: standalone/drakbackup:2662
#, c-format
msgid "- Restore Other Files: \n"
msgstr ""

#: standalone/drakbackup:2841
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2843
#, fuzzy, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."

#: standalone/drakbackup:2853
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2874
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2875
#, c-format
msgid "          Successfully Restored on %s       "
msgstr ""

#: standalone/drakbackup:2976
#, c-format
msgid "/usr/bin/star not found, using tar..."
msgstr ""

#: standalone/drakbackup:3012
#, fuzzy, c-format
msgid "         Restore Configuration       "
msgstr "Канфігурацыя"

#: standalone/drakbackup:3040
#, c-format
msgid "OK to restore the other files."
msgstr ""

#: standalone/drakbackup:3056
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:3121
#, c-format
msgid "Please choose the date to restore:"
msgstr ""

#: standalone/drakbackup:3158
#, c-format
msgid "Restore from Hard Disk."
msgstr ""

#: standalone/drakbackup:3160
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "Выберыце каталог у якім будзе захоўвацца MPEG:"

#: standalone/drakbackup:3164
#, c-format
msgid "Directory with backups"
msgstr ""

#: standalone/drakbackup:3218
#, c-format
msgid "Select another media to restore from"
msgstr ""

#: standalone/drakbackup:3220
#, fuzzy, c-format
msgid "Other Media"
msgstr "Іншыя"

#: standalone/drakbackup:3225
#, fuzzy, c-format
msgid "Restore system"
msgstr "Усталяванне сістэмы"

#: standalone/drakbackup:3226
#, c-format
msgid "Restore Users"
msgstr ""

#: standalone/drakbackup:3227
#, fuzzy, c-format
msgid "Restore Other"
msgstr "Рэстарт"

#: standalone/drakbackup:3229
#, c-format
msgid "Select path to restore (instead of /)"
msgstr ""

#: standalone/drakbackup:3233 standalone/drakbackup:3514
#, c-format
msgid "Path To Restore To"
msgstr ""

#: standalone/drakbackup:3236
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3238
#, c-format
msgid "Remove user directories before restore."
msgstr ""

#: standalone/drakbackup:3322
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3325
#, fuzzy, c-format
msgid "Search Backups"
msgstr "Шукаць: "

#: standalone/drakbackup:3343
#, c-format
msgid "No matches found..."
msgstr ""

#: standalone/drakbackup:3347
#, fuzzy, c-format
msgid "Restore Selected"
msgstr "/Выдаліць/Выбранае"

#: standalone/drakbackup:3482
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3488
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3497
#, fuzzy, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr "/Выдаліць/Выбранае"

#: standalone/drakbackup:3573
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: standalone/drakbackup:3586
#, fuzzy, c-format
msgid "Restore From CD"
msgstr "Выдаліць з RAID"

#: standalone/drakbackup:3586
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3588
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3598
#, c-format
msgid "Restore From Tape"
msgstr ""

#: standalone/drakbackup:3598
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3600
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network"
msgstr ""

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: standalone/drakbackup:3612
#, c-format
msgid "Host Name"
msgstr "Назва вузла"

#: standalone/drakbackup:3613
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3620
#, fuzzy, c-format
msgid "Password required"
msgstr "Настроіць паролі"

#: standalone/drakbackup:3626
#, fuzzy, c-format
msgid "Username required"
msgstr "Імя карыстальніку:"

#: standalone/drakbackup:3629
#, fuzzy, c-format
msgid "Hostname required"
msgstr "Імя машыны"

#: standalone/drakbackup:3634
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3646
#, c-format
msgid "Files Restored..."
msgstr ""

#: standalone/drakbackup:3649
#, c-format
msgid "Restore Failed..."
msgstr ""

#: standalone/drakbackup:3677
#, c-format
msgid "%s not retrieved..."
msgstr ""

#: standalone/drakbackup:3901 standalone/drakbackup:3970
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "Адшукаць файлы на дыску"

#: standalone/drakbackup:3905
#, c-format
msgid "Restore all backups"
msgstr ""

#: standalone/drakbackup:3913
#, fuzzy, c-format
msgid "Custom Restore"
msgstr "Па выбару"

#: standalone/drakbackup:3917 standalone/drakbackup:3966
#, c-format
msgid "Restore From Catalog"
msgstr ""

#: standalone/drakbackup:3938
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr ""

#: standalone/drakbackup:3939
#, c-format
msgid "Verify that %s is the correct path"
msgstr ""

#: standalone/drakbackup:3940
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3942
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3958
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3963
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3964
#, c-format
msgid "Directory To Restore From"
msgstr ""

#: standalone/drakbackup:4000
#, c-format
msgid "Restore Progress"
msgstr ""

#: standalone/drakbackup:4108
#, fuzzy, c-format
msgid "Build Backup"
msgstr "Чорны"

#: standalone/drakbackup:4141 standalone/drakbackup:4438
#, c-format
msgid "Restore"
msgstr "Аднавіць"

#: standalone/drakbackup:4233
#, fuzzy, c-format
msgid "Please select data to restore..."
msgstr "Пазначце ня менш адной групы для карыстальніка"

#: standalone/drakbackup:4273
#, fuzzy, c-format
msgid "Backup system files"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:4276
#, fuzzy, c-format
msgid "Backup user files"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:4279
#, fuzzy, c-format
msgid "Backup other files"
msgstr "Дрэнны файл рэзервовай копіі"

#: standalone/drakbackup:4282 standalone/drakbackup:4316
#, c-format
msgid "Total Progress"
msgstr ""

#: standalone/drakbackup:4308
#, c-format
msgid "Sending files by FTP"
msgstr ""

#: standalone/drakbackup:4311
#, fuzzy, c-format
msgid "Sending files..."
msgstr "Вызначэнне прыладаў..."

#: standalone/drakbackup:4381
#, fuzzy, c-format
msgid "Backup Now from configuration file"
msgstr "Завершана аднаўленьне канфігурацыі меню"

#: standalone/drakbackup:4386
#, fuzzy, c-format
msgid "View Backup Configuration."
msgstr "Канфігурацыя сеткі"

#: standalone/drakbackup:4412
#, fuzzy, c-format
msgid "Wizard Configuration"
msgstr "Канфігурацыя"

#: standalone/drakbackup:4417
#, fuzzy, c-format
msgid "Advanced Configuration"
msgstr "Канфігурацыя"

#: standalone/drakbackup:4422
#, fuzzy, c-format
msgid "View Configuration"
msgstr "Канфігурацыя"

#: standalone/drakbackup:4426
#, fuzzy, c-format
msgid "View Last Log"
msgstr "Відэа"

#: standalone/drakbackup:4431
#, fuzzy, c-format
msgid "Backup Now"
msgstr "Чорны"

#: standalone/drakbackup:4435
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4473
#, fuzzy, c-format
msgid "Load profile"
msgstr "Лякальны файл"

#: standalone/drakbackup:4482
#, fuzzy, c-format
msgid "Save profile as..."
msgstr "Захаваць спіс"

#: standalone/drakbackup:4504 standalone/drakbackup:4507
#, fuzzy, c-format
msgid "Drakbackup"
msgstr "Чорны"

#: standalone/drakboot:49
#, c-format
msgid "No bootloader found, creating a new configuration"
msgstr ""

#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_Файл"

#: standalone/drakboot:85 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr "/Файл/_Выйсьці"

#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:125
#, c-format
msgid "Text only"
msgstr "Толькі тэкст"

#: standalone/drakboot:126
#, c-format
msgid "Verbose"
msgstr ""

#: standalone/drakboot:127
#, c-format
msgid "Silent"
msgstr ""

#: standalone/drakboot:134
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:135
#, fuzzy, c-format
msgid "Do you want to configure it now?"
msgstr "Ці жадаеце пратэсціраваць настройкі?"

#: standalone/drakboot:144
#, fuzzy, c-format
msgid "Install themes"
msgstr "Усталяванне сістэмы"

#: standalone/drakboot:146
#, c-format
msgid "Graphical boot theme selection"
msgstr ""

#: standalone/drakboot:149
#, fuzzy, c-format
msgid "Graphical boot mode:"
msgstr "Абалонка"

#: standalone/drakboot:151
#, c-format
msgid "Theme"
msgstr "Тэма"

#: standalone/drakboot:154
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: standalone/drakboot:159
#, fuzzy, c-format
msgid "Create new theme"
msgstr "Стварыць новага карыстальніка"

#: standalone/drakboot:191
#, fuzzy, c-format
msgid "Default user"
msgstr "Па ўмаўчанні (%s)"

#: standalone/drakboot:192
#, fuzzy, c-format
msgid "Default desktop"
msgstr "Скура Па ўмаўчанні"

#: standalone/drakboot:195
#, c-format
msgid "No, I do not want autologin"
msgstr ""

#: standalone/drakboot:196
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""

#: standalone/drakboot:203
#, fuzzy, c-format
msgid "System mode"
msgstr "Сыстэмнае меню"

#: standalone/drakboot:206
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr ""

#: standalone/drakboot:272
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, fuzzy, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr "Дастасаваньне для кіраваньня карыстальнікамі Mandriva Linux"

#: standalone/drakbug:46
#, fuzzy, c-format
msgid "Mandriva Linux Control Center"
msgstr "Цэнтар кіраваньня"

#: standalone/drakbug:48
#, fuzzy, c-format
msgid "Synchronization tool"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/drakbug:49 standalone/drakbug:152
#, fuzzy, c-format
msgid "Standalone Tools"
msgstr "Кансольныя інструментальныя сродкі"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr ""

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr ""

#: standalone/drakbug:52
#, fuzzy, c-format
msgid "Menudrake"
msgstr "Рэдактар мэню"

#: standalone/drakbug:53
#, fuzzy, c-format
msgid "Msec"
msgstr "Мыш"

#: standalone/drakbug:54
#, fuzzy, c-format
msgid "Remote Control"
msgstr "Кантролер гучнасьці"

#: standalone/drakbug:55
#, fuzzy, c-format
msgid "Software Manager"
msgstr "Мэнэджэр сэрвісаў"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr ""

#: standalone/drakbug:57
#, fuzzy, c-format
msgid "Windows Migration tool"
msgstr "Уласьцівасьці акна"

#: standalone/drakbug:58 standalone/draksambashare:1236
#, c-format
msgid "Userdrake"
msgstr ""

#: standalone/drakbug:59
#, fuzzy, c-format
msgid "Configuration Wizards"
msgstr "Канфігурацыя"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, fuzzy, c-format
msgid "Find Package"
msgstr "Пэйджэр"

#: standalone/drakbug:87
#, fuzzy, c-format
msgid "Package: "
msgstr "Пэйджэр"

#: standalone/drakbug:88
#, fuzzy, c-format
msgid "Kernel:"
msgstr "Імя"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""

#: standalone/drakbug:107
#, fuzzy, c-format
msgid "Report"
msgstr "Цыклічна"

#: standalone/drakbug:162
#, fuzzy, c-format
msgid "Not installed"
msgstr "Заканчэнне ўсталявання"

#: standalone/drakbug:174
#, fuzzy, c-format
msgid "Package not installed"
msgstr "Выбар пакетаў"

#: standalone/drakclock:29
#, fuzzy, c-format
msgid "DrakClock"
msgstr "Рок"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "Настроіць панэль"

#: standalone/drakclock:41
#, c-format
msgid "Change Time Zone"
msgstr ""

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr ""

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr ""

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Сеткавы інтэрфейс"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "Сэрвэр:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "Скінуць"

#: standalone/drakclock:224
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""

#: standalone/drakconnect:80
#, fuzzy, c-format
msgid "Network configuration (%d adapters)"
msgstr "Канфігурацыя сеткі"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Gateway:"
msgstr "Шлюз:"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Interface:"
msgstr "Інтэрфэйс:"

#: standalone/drakconnect:93 standalone/net_monitor:116
#, c-format
msgid "Wait please"
msgstr ""

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "Інтэрфэйс"

#: standalone/drakconnect:109 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "State"
msgstr "Стан"

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr "Імя машыны: "

#: standalone/drakconnect:128
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "Настройка IDE"

#: standalone/drakconnect:142 standalone/drakconnect:845
#, fuzzy, c-format
msgid "LAN configuration"
msgstr "Настройка ISDN"

#: standalone/drakconnect:147
#, fuzzy, c-format
msgid "Configure Local Area Network..."
msgstr "Настройка сеткі"

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Применить"

#: standalone/drakconnect:188
#, c-format
msgid "Manage connections"
msgstr ""

#: standalone/drakconnect:215
#, fuzzy, c-format
msgid "Device selected"
msgstr "/Выдаліць/Выбранае"

#: standalone/drakconnect:296
#, fuzzy, c-format
msgid "IP configuration"
msgstr "Канфігурацыя"

#: standalone/drakconnect:335
#, fuzzy, c-format
msgid "DNS servers"
msgstr "CDDB сервакі"

#: standalone/drakconnect:343
#, fuzzy, c-format
msgid "Search Domain"
msgstr "NIS Domain"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "static"
msgstr "Антарктыка"

#: standalone/drakconnect:351
#, c-format
msgid "DHCP"
msgstr ""

#: standalone/drakconnect:515
#, fuzzy, c-format
msgid "Flow control"
msgstr "Кантроль гуку"

#: standalone/drakconnect:516
#, fuzzy, c-format
msgid "Line termination"
msgstr "Памеры і арыентацыя"

#: standalone/drakconnect:527
#, c-format
msgid "Modem timeout"
msgstr ""

#: standalone/drakconnect:531
#, fuzzy, c-format
msgid "Use lock file"
msgstr "Абярыце файл"

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:536
#, fuzzy, c-format
msgid "Busy wait"
msgstr "Калі ласка, пачакайце"

#: standalone/drakconnect:541
#, fuzzy, c-format
msgid "Modem sound"
msgstr "Запісаць гукавы кліп"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "Уключыць"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "Выключыць"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr ""

#: standalone/drakconnect:594
#, fuzzy, c-format
msgid "Module name"
msgstr "Назва файла"

#: standalone/drakconnect:595
#, fuzzy, c-format
msgid "Mac Address"
msgstr "Адрасная кніга"

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr "Прац."

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr ""

#: standalone/drakconnect:700 standalone/drakgw:311
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Ні водны ethernet сеткавы адаптар у вашай сістэме не вызначаны. Калі ласка, "
"скарыстайце канфігурацыйны інструмэнт."

#: standalone/drakconnect:708
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "Пазначце сеткавы інтэрфейс"

#: standalone/drakconnect:712
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "Пазначце сеткавы інтэрфейс"

#: standalone/drakconnect:744
#, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""

#: standalone/drakconnect:745
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:761
#, c-format
msgid "No IP"
msgstr ""

#: standalone/drakconnect:762
#, c-format
msgid "No Mask"
msgstr ""

#: standalone/drakconnect:763 standalone/drakconnect:916
#, fuzzy, c-format
msgid "up"
msgstr "Скокнуць"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "down"
msgstr ""

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Connected"
msgstr "Далучаны"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Not connected"
msgstr "Адлучаны"

#: standalone/drakconnect:800
#, c-format
msgid "Disconnect..."
msgstr ""

#: standalone/drakconnect:800
#, fuzzy, c-format
msgid "Connect..."
msgstr "Настройка IDE"

#: standalone/drakconnect:841
#, c-format
msgid "Deactivate now"
msgstr ""

#: standalone/drakconnect:841
#, c-format
msgid "Activate now"
msgstr ""

#: standalone/drakconnect:849
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: standalone/drakconnect:863
#, fuzzy, c-format
msgid "LAN Configuration"
msgstr "Канфігурацыя"

#: standalone/drakconnect:875
#, c-format
msgid "Adapter %s: %s"
msgstr ""

#: standalone/drakconnect:884
#, fuzzy, c-format
msgid "Boot Protocol"
msgstr "Пратакол"

#: standalone/drakconnect:885
#, c-format
msgid "Started on boot"
msgstr ""

#: standalone/drakconnect:921
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakconnect:975 standalone/net_applet:51
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
#, fuzzy, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "Пазначце сеткавы інтэрфейс"

#: standalone/drakconnect:981
#, fuzzy, c-format
msgid "Internet connection configuration"
msgstr "Настройка далучэння да Інтэрнэту"

#: standalone/drakconnect:994
#, c-format
msgid "Third DNS server (optional)"
msgstr ""

#: standalone/drakconnect:1016
#, fuzzy, c-format
msgid "Internet Connection Configuration"
msgstr "Настройка далучэння да Інтэрнэту"

#: standalone/drakconnect:1017
#, c-format
msgid "Internet access"
msgstr ""

#: standalone/drakconnect:1019 standalone/net_monitor:95
#, fuzzy, c-format
msgid "Connection type: "
msgstr "Імя злучэння"

#: standalone/drakconnect:1022
#, c-format
msgid "Status:"
msgstr "Стан:"

#: standalone/drakconnect:1027
#, c-format
msgid "Parameters"
msgstr "Парамэтры"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr ""

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr ""

#: standalone/drakedm:42
#, fuzzy, c-format
msgid "XDM (X Display Manager)"
msgstr "Мэнэджэр файлаў"

#: standalone/drakedm:53
#, fuzzy, c-format
msgid "Choosing a display manager"
msgstr "Мэнэджэр файлаў"

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:72
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "Куды вы жадаеце манціраваць прыладу %s?"

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfont:182
#, c-format
msgid "Search installed fonts"
msgstr ""

#: standalone/drakfont:184
#, c-format
msgid "Unselect fonts installed"
msgstr ""

#: standalone/drakfont:207
#, fuzzy, c-format
msgid "parse all fonts"
msgstr "Выкарыстовываць шрыфт X"

#: standalone/drakfont:209
#, c-format
msgid "No fonts found"
msgstr ""

#: standalone/drakfont:217 standalone/drakfont:259 standalone/drakfont:326
#: standalone/drakfont:359 standalone/drakfont:367 standalone/drakfont:393
#: standalone/drakfont:411 standalone/drakfont:425
#, fuzzy, c-format
msgid "done"
msgstr "Зроблена"

#: standalone/drakfont:222
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:257
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:260
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "Не знойздены праграмы\n"

#: standalone/drakfont:270
#, fuzzy, c-format
msgid "Search for fonts in installed list"
msgstr "Адшукаць файлы на дыску"

#: standalone/drakfont:295
#, c-format
msgid "%s fonts conversion"
msgstr ""

#: standalone/drakfont:324
#, fuzzy, c-format
msgid "Fonts copy"
msgstr "Шрыфты"

#: standalone/drakfont:327
#, fuzzy, c-format
msgid "True Type fonts installation"
msgstr "Падрыхтоўка ўсталяваньня"

#: standalone/drakfont:334
#, c-format
msgid "please wait during ttmkfdir..."
msgstr ""

#: standalone/drakfont:335
#, c-format
msgid "True Type install done"
msgstr ""

#: standalone/drakfont:341 standalone/drakfont:356
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:350
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:360
#, c-format
msgid "Suppress Temporary Files"
msgstr ""

#: standalone/drakfont:363
#, fuzzy, c-format
msgid "Restart XFS"
msgstr "Рэстарт"

#: standalone/drakfont:409 standalone/drakfont:419
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:421
#, fuzzy, c-format
msgid "xfs restart"
msgstr "Рэстарт"

#: standalone/drakfont:429
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:473 standalone/drakfont:482
#, fuzzy, c-format
msgid "DrakFont"
msgstr "Шрыфт"

#: standalone/drakfont:483
#, c-format
msgid "Font List"
msgstr "Сьпіс шрыфтоў"

#: standalone/drakfont:486
#, c-format
msgid "Get Windows Fonts"
msgstr ""

#: standalone/drakfont:492
#, c-format
msgid "About"
msgstr "Даведка"

#: standalone/drakfont:494 standalone/drakfont:686 standalone/drakfont:724
#, fuzzy, c-format
msgid "Uninstall"
msgstr "Усталёўка"

#: standalone/drakfont:495
#, c-format
msgid "Import"
msgstr "Імпарт"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:513
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""

#: standalone/drakfont:522
#, fuzzy, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
"Пашырэнне ESounD\n"
"\n"
" Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць "
"і/альбо мадыфікаваць яго\n"
"у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n"
"Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца "
"версыяй 2 ліцэнзыі альбо\n"
"(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n"
"\n"
"Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n"
"але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n"
"ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n"
"за падрабязнасцямі глянце на GNU ліцэнзыю.\n"
"\n"
"А копію ліцэнзыі вы павінны былі атрымаць\n"
"разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n"
"Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
"02111-1307,\n"
"USA."

#: standalone/drakfont:538
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:557
#, fuzzy, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Выбар раздзелаў для фарматавання"

#: standalone/drakfont:568
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:569
#, fuzzy, c-format
msgid "StarOffice"
msgstr "Офіс"

#: standalone/drakfont:570
#, fuzzy, c-format
msgid "Abiword"
msgstr "Клявіятура"

#: standalone/drakfont:571
#, fuzzy, c-format
msgid "Generic Printers"
msgstr "Прынтэры"

#: standalone/drakfont:585
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: standalone/drakfont:586
#, c-format
msgid "File Selection"
msgstr "Выбар файла"

#: standalone/drakfont:590
#, c-format
msgid "Fonts"
msgstr "Шрыфты"

#: standalone/drakfont:653
#, fuzzy, c-format
msgid "Import fonts"
msgstr "важна"

#: standalone/drakfont:658
#, fuzzy, c-format
msgid "Install fonts"
msgstr "Усталёўка"

#: standalone/drakfont:691
#, c-format
msgid "click here if you are sure."
msgstr ""

#: standalone/drakfont:693
#, c-format
msgid "here if no."
msgstr ""

#: standalone/drakfont:732
#, fuzzy, c-format
msgid "Unselected All"
msgstr "Дадаць выбраныя файлы"

#: standalone/drakfont:735
#, fuzzy, c-format
msgid "Selected All"
msgstr "Абярыце файл"

#: standalone/drakfont:738
#, c-format
msgid "Remove List"
msgstr "Выдаліць сьпіс"

#: standalone/drakfont:749 standalone/drakfont:768
#, c-format
msgid "Importing fonts"
msgstr ""

#: standalone/drakfont:753 standalone/drakfont:773
#, fuzzy, c-format
msgid "Initial tests"
msgstr "Віртуальныя працоўныя сталы"

#: standalone/drakfont:754
#, fuzzy, c-format
msgid "Copy fonts on your system"
msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"

#: standalone/drakfont:755
#, c-format
msgid "Install & convert Fonts"
msgstr ""

#: standalone/drakfont:756
#, fuzzy, c-format
msgid "Post Install"
msgstr "Усталёўка"

#: standalone/drakfont:774
#, fuzzy, c-format
msgid "Remove fonts on your system"
msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"

#: standalone/drakfont:775
#, fuzzy, c-format
msgid "Post Uninstall"
msgstr "Заканчэнне ўсталявання"

#: standalone/drakgw:50 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr ""

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr "Сумеснае Інтэрнэт-злучэнне"

#: standalone/drakgw:79
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:99
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:105
#, fuzzy, c-format
msgid "Reconfigure"
msgstr "Настроіць панэль"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Калі ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да "
"вашай лакальнай сеткі."

#: standalone/drakgw:177
#, fuzzy, c-format
msgid "Local Area Network settings"
msgstr "Прагляд лякальнай сеткі"

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr ""

#: standalone/drakgw:182
#, c-format
msgid "The internal domain name"
msgstr ""

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Патэнцыйны адрас ЛВС канфліктуе з бягучай канфігурацыяй %s!\n"

#: standalone/drakgw:204
#, fuzzy, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr "Сістэмнае адміністраваньне"

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr ""

#: standalone/drakgw:209
#, fuzzy, c-format
msgid "The DNS Server IP"
msgstr "IP сэервера SMB"

#: standalone/drakgw:236
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:243
#, fuzzy, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "Аўтаматычнае вызначэнне"

#: standalone/drakgw:244
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:245
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:246
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:247
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:270
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr ""

#: standalone/drakgw:274
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr ""

#: standalone/drakgw:275
#, c-format
msgid "Admin mail"
msgstr ""

#: standalone/drakgw:276
#, fuzzy, c-format
msgid "Visible hostname"
msgstr "Выкарыстаць выдалены хост"

#: standalone/drakgw:277
#, fuzzy, c-format
msgid "Proxy port"
msgstr "Якасьць"

#: standalone/drakgw:278
#, fuzzy, c-format
msgid "Cache size (MB)"
msgstr "памер блоку"

#: standalone/drakgw:300
#, fuzzy, c-format
msgid "Broadcast printer information"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/drakgw:317
#, fuzzy, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма"

#: standalone/drakgw:323
#, fuzzy, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"

#: standalone/drakgw:329
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""

#: standalone/drakgw:364
#, fuzzy, c-format
msgid "Disabling servers..."
msgstr "Вызначэнне прыладаў..."

#: standalone/drakgw:378
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"

#: standalone/drakgw:379
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Увага! Знойдзена існуючая сістэма сеткавай бяспекі (firewall). Вам магчыма "
"спатрэбіцца скарэктаваць яе пасля ўсталявання."

#: standalone/drakgw:384
#, fuzzy, c-format
msgid "Configuring..."
msgstr "Настройка IDE"

#: standalone/drakgw:385
#, c-format
msgid "Configuring firewall..."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:51
#, fuzzy, c-format
msgid "Mandriva Linux Help Center"
msgstr "Цэнтар кіраваньня"

#: standalone/drakhelp:51
#, c-format
msgid "No Help entry for %s\n"
msgstr ""

#: standalone/drakhosts:98
#, c-format
msgid "Please add an host to be able to modify it."
msgstr ""

#: standalone/drakhosts:108
#, fuzzy, c-format
msgid "Please modify information"
msgstr "Інфармацыя аб DMA"

#: standalone/drakhosts:109
#, fuzzy, c-format
msgid "Please delete information"
msgstr "Інфармацыя аб DMA"

#: standalone/drakhosts:110
#, fuzzy, c-format
msgid "Please add information"
msgstr "Інфармацыя аб DMA"

#: standalone/drakhosts:115
#, c-format
msgid "IP address:"
msgstr "IP адрас:"

#: standalone/drakhosts:116
#, c-format
msgid "Host name:"
msgstr "Назва вузла:"

#: standalone/drakhosts:117
#, c-format
msgid "Host Aliases:"
msgstr ""

#: standalone/drakhosts:123
#, c-format
msgid "Please enter a valid IP address."
msgstr ""

#: standalone/drakhosts:129
#, c-format
msgid "Same IP is already in %s file."
msgstr ""

#: standalone/drakhosts:197
#, c-format
msgid "Host Aliases"
msgstr ""

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr ""

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr ""

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr ""

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr ""

#: standalone/drakids:26
#, fuzzy, c-format
msgid "Allowed addresses"
msgstr "Дадаць карыстальніка"

#: standalone/drakids:57
#, c-format
msgid "Log"
msgstr "Рэгістрацыя"

#: standalone/drakids:61
#, fuzzy, c-format
msgid "Clear logs"
msgstr "Ачысціць усё"

#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470
#, c-format
msgid "Blacklist"
msgstr ""

#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475
#, c-format
msgid "Whitelist"
msgstr ""

#: standalone/drakids:71
#, fuzzy, c-format
msgid "Remove from blacklist"
msgstr "Выдаліць з LVM"

#: standalone/drakids:72
#, c-format
msgid "Move to whitelist"
msgstr ""

#: standalone/drakids:84
#, fuzzy, c-format
msgid "Remove from whitelist"
msgstr "Выдаліць з LVM"

#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385
#, fuzzy, c-format
msgid "Unable to contact daemon"
msgstr "Немагчыма адчыніць файл %s\n"

#: standalone/drakids:202
#, c-format
msgid "Date"
msgstr "Дата"

#: standalone/drakids:203
#, fuzzy, c-format
msgid "Attacker"
msgstr "Падрабязнасці"

#: standalone/drakids:204
#, fuzzy, c-format
msgid "Attack type"
msgstr "Тып: "

#: standalone/drakids:205
#, fuzzy, c-format
msgid "Service"
msgstr "Сэрвісы"

#: standalone/drakids:206 standalone/net_applet:72
#, c-format
msgid "Network interface"
msgstr "Сеткавы інтэрфейс"

#: standalone/draknfs:41
#, c-format
msgid "map root user as anonymous"
msgstr ""

#: standalone/draknfs:42
#, c-format
msgid "map all users to anonymous user"
msgstr ""

#: standalone/draknfs:43
#, c-format
msgid "No user UID mapping"
msgstr ""

#: standalone/draknfs:44
#, c-format
msgid "allow real remote root access"
msgstr ""

#: standalone/draknfs:83
#, c-format
msgid "NFS server"
msgstr ""

#: standalone/draknfs:83
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr ""

#: standalone/draknfs:84
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr ""

#: standalone/draknfs:100 standalone/draksambashare:203
#, c-format
msgid "Directory Selection"
msgstr ""

#: standalone/draknfs:105 standalone/draksambashare:208
#, c-format
msgid "Should be a directory."
msgstr ""

#: standalone/draknfs:136
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""

#: standalone/draknfs:151
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
"off root squashing. This option is mainly useful for diskless clients "
"(no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
"exported public FTP directories, news spool directories, etc. The opposite "
"option is no user UID mapping (no_all_squash), which is the default "
"setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
"the uid and gid of the anonymous account.\n"
msgstr ""

#: standalone/draknfs:167
#, c-format
msgid "Synchronous access:"
msgstr ""

#: standalone/draknfs:168
#, c-format
msgid "Secured Connection:"
msgstr ""

#: standalone/draknfs:169
#, c-format
msgid "Read-Only share:"
msgstr ""

#: standalone/draknfs:171
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr ""

#: standalone/draknfs:172
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""

#: standalone/draknfs:173
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""

#: standalone/draknfs:306
#, c-format
msgid "Please add an NFS share to be able to modify it."
msgstr ""

#: standalone/draknfs:378
#, fuzzy, c-format
msgid "Advanced Options Help"
msgstr "Канфігурацыя"

#: standalone/draknfs:389
#, c-format
msgid "NFS directory"
msgstr ""

#: standalone/draknfs:391 standalone/draksambashare:594
#: standalone/draksambashare:773
#, c-format
msgid "Directory:"
msgstr "Каталёг:"

#: standalone/draknfs:394
#, c-format
msgid "Host access"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Access:"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Hosts Access"
msgstr ""

#: standalone/draknfs:399
#, c-format
msgid "User ID Mapping"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "User ID:"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "Help User ID"
msgstr ""

#: standalone/draknfs:402
#, c-format
msgid "Anonymous user ID:"
msgstr ""

#: standalone/draknfs:403
#, c-format
msgid "Anonymous Group ID:"
msgstr ""

#: standalone/draknfs:444
#, c-format
msgid "Can't create this directory."
msgstr ""

#: standalone/draknfs:447
#, c-format
msgid "You must specify hosts access."
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Share Directory"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Hosts Wildcard"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "General Options"
msgstr "Агульныя парамэтры"

#: standalone/draknfs:527
#, c-format
msgid "Custom Options"
msgstr ""

#: standalone/draknfs:539 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Please enter a directory to share."
msgstr ""

#: standalone/draknfs:546
#, c-format
msgid "Please use the modify button to set right access."
msgstr ""

#: standalone/draknfs:600
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr ""

#: standalone/draknfs:609
#, c-format
msgid "Failed to add NFS share."
msgstr ""

#: standalone/draknfs:616
#, c-format
msgid "Failed to Modify NFS share."
msgstr ""

#: standalone/draknfs:623
#, c-format
msgid "Failed to remove an NFS share."
msgstr ""

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr "сыстэмныя ўсталёўкі"

#: standalone/drakperm:22
#, fuzzy, c-format
msgid "Custom settings"
msgstr "Настройкі мышы"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "Выкарыстоўваць існуючы раздзел"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "Можа рэдагавацца"

#: standalone/drakperm:48 standalone/drakperm:323
#: standalone/draksambashare:101
#, c-format
msgid "Path"
msgstr "Шлях:"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Карыстальнік"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Група"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "Правы доступу"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr ""

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr ""

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "Угору"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "Уніз"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Add a rule"
msgstr "Дадаць карыстальніка"

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Add a new rule at the end"
msgstr "Дадаць карыстальніка ў сыстэму"

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Delete selected rule"
msgstr "Выдаліць вылучаны радок"

#: standalone/drakperm:242
#, fuzzy, c-format
msgid "browse"
msgstr "Прагляд"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "карыстальнік"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "група"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "іншы"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Чытаньне"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, fuzzy, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""
"%s\n"
"Немагчыма запісаць у файл: %s"

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "Запіс"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, fuzzy, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""
"%s\n"
"Немагчыма запісаць у файл: %s"

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "Выканаць"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr ""

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "Карыстальнік(ца):"

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "Група:"

#: standalone/drakperm:298
#, fuzzy, c-format
msgid "Current user"
msgstr "Прыняць карыстальніка"

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""

#: standalone/drakperm:309
#, fuzzy, c-format
msgid "Path selection"
msgstr "Дзеяньні"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr "Якасьць"

#: standalone/drakperm:380
#, c-format
msgid ""
"The first character of the path must be a slash (\"/\"):\n"
"\"%s\""
msgstr ""

#: standalone/drakperm:390
#, c-format
msgid "Both the username and the group must valid!"
msgstr ""

#: standalone/drakperm:391
#, c-format
msgid "User: %s"
msgstr ""

#: standalone/drakperm:392
#, c-format
msgid "Group: %s"
msgstr ""

#: standalone/drakroam:33
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakroam:48
#, c-format
msgid "SSID"
msgstr ""

#: standalone/drakroam:49
#, c-format
msgid "Signal strength"
msgstr ""

#: standalone/drakroam:51
#, c-format
msgid "Encryption"
msgstr "Шыфраваньне"

#: standalone/drakroam:112
#, c-format
msgid "Please enter settings for wireless network \"%s\""
msgstr ""

#: standalone/drakroam:123
#, c-format
msgid "DNS server"
msgstr ""

#: standalone/drakroam:228
#, c-format
msgid "Connect"
msgstr "Далучэньне"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:229 standalone/printerdrake:251
#, c-format
msgid "Refresh"
msgstr "Аднавіць"

#: standalone/draksambashare:68
#, fuzzy, c-format
msgid "Share directory"
msgstr "Ня тэчка"

#: standalone/draksambashare:69 standalone/draksambashare:102
#, c-format
msgid "Comment"
msgstr "Камэнтар"

#: standalone/draksambashare:70 standalone/draksambashare:103
#, fuzzy, c-format
msgid "Browseable"
msgstr "Прагляд"

#: standalone/draksambashare:71
#, c-format
msgid "Public"
msgstr "Агульны"

#: standalone/draksambashare:72 standalone/draksambashare:108
#, fuzzy, c-format
msgid "Writable"
msgstr "Запіс"

#: standalone/draksambashare:73 standalone/draksambashare:149
#, fuzzy, c-format
msgid "Create mask"
msgstr "Стварыць"

#: standalone/draksambashare:74 standalone/draksambashare:150
#, fuzzy, c-format
msgid "Directory mask"
msgstr "Каталог %s Так"

#: standalone/draksambashare:75
#, fuzzy, c-format
msgid "Read list"
msgstr "Чытаньне"

#: standalone/draksambashare:76 standalone/draksambashare:109
#: standalone/draksambashare:608
#, fuzzy, c-format
msgid "Write list"
msgstr "Запіс"

#: standalone/draksambashare:77 standalone/draksambashare:141
#, fuzzy, c-format
msgid "Admin users"
msgstr "Дадаць карыстальніка"

#: standalone/draksambashare:78 standalone/draksambashare:142
#, fuzzy, c-format
msgid "Valid users"
msgstr "Дадаць карыстальніка"

#: standalone/draksambashare:79
#, fuzzy, c-format
msgid "Inherit Permissions"
msgstr "Правы доступу"

#: standalone/draksambashare:80 standalone/draksambashare:143
#, fuzzy, c-format
msgid "Hide dot files"
msgstr "Загрузіць файл(ы)"

#: standalone/draksambashare:82 standalone/draksambashare:148
#, fuzzy, c-format
msgid "Preserve case"
msgstr "Усталяваньні"

#: standalone/draksambashare:83
#, c-format
msgid "Force create mode"
msgstr ""

#: standalone/draksambashare:84
#, fuzzy, c-format
msgid "Force group"
msgstr "Працоўная група"

#: standalone/draksambashare:85 standalone/draksambashare:147
#, fuzzy, c-format
msgid "Default case"
msgstr "Па ўмаўчанні (%s)"

#: standalone/draksambashare:100
#, c-format
msgid "Printer name"
msgstr "Назва друкаркі"

#: standalone/draksambashare:104 standalone/draksambashare:600
#, c-format
msgid "Printable"
msgstr "Здольны друкавацца"

#: standalone/draksambashare:105
#, c-format
msgid "Print Command"
msgstr ""

#: standalone/draksambashare:106
#, c-format
msgid "LPQ command"
msgstr ""

#: standalone/draksambashare:107
#, c-format
msgid "Guest ok"
msgstr ""

#: standalone/draksambashare:110 standalone/draksambashare:151
#: standalone/draksambashare:609
#, fuzzy, c-format
msgid "Inherit permissions"
msgstr "Правы доступу"

#: standalone/draksambashare:112
#, c-format
msgid "Create mode"
msgstr ""

#: standalone/draksambashare:113
#, c-format
msgid "Use client driver"
msgstr ""

#: standalone/draksambashare:139
#, fuzzy, c-format
msgid "Read List"
msgstr "Выдаліць сьпіс"

#: standalone/draksambashare:140
#, fuzzy, c-format
msgid "Write List"
msgstr "Запіс"

#: standalone/draksambashare:145
#, fuzzy, c-format
msgid "Force Group"
msgstr "Група"

#: standalone/draksambashare:146
#, c-format
msgid "Force create group"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid "About Draksambashare"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid ""
"Mandriva Linux \n"
"Release: %s\n"
"Author: Antoine Ginies\n"
"\n"
"This is a simple tool to easily manage Samba configuration."
msgstr ""

#: standalone/draksambashare:186
#, fuzzy, c-format
msgid "Samba server"
msgstr "NIS сэервер:"

#: standalone/draksambashare:186
#, c-format
msgid "Restarting/Reloading Samba server..."
msgstr ""

#: standalone/draksambashare:187
#, c-format
msgid "Error Restarting/Reloading Samba server"
msgstr ""

#: standalone/draksambashare:373
#, c-format
msgid "Add a Samba share"
msgstr ""

#: standalone/draksambashare:376
#, c-format
msgid "Goal of this wizard is to easily create a new Samba share."
msgstr ""

#: standalone/draksambashare:378
#, fuzzy, c-format
msgid "Name of the share:"
msgstr "Імя друкаркі"

#: standalone/draksambashare:379 standalone/draksambashare:593
#: standalone/draksambashare:774
#, c-format
msgid "Comment:"
msgstr "Камэнтар:"

#: standalone/draksambashare:380
#, c-format
msgid "Path:"
msgstr "Шлях:"

#: standalone/draksambashare:385
#, c-format
msgid ""
"Share with the same name already exist or share name empty, please choose "
"another name."
msgstr ""

#: standalone/draksambashare:389 standalone/draksambashare:395
#, c-format
msgid "Can't create the directory, please enter a correct path."
msgstr ""

#: standalone/draksambashare:392 standalone/draksambashare:629
#: standalone/draksambashare:796
#, c-format
msgid "Please enter a Comment for this share."
msgstr ""

#: standalone/draksambashare:423
#, c-format
msgid ""
"The wizard successfully added the Samba share. Now just double click on it "
"in treeview to modify it"
msgstr ""

#: standalone/draksambashare:439
#, c-format
msgid "pdf-gen - a PDF generator"
msgstr ""

#: standalone/draksambashare:440
#, c-format
msgid "printers - all printers available"
msgstr ""

#: standalone/draksambashare:444
#, c-format
msgid "Add Special Printer share"
msgstr ""

#: standalone/draksambashare:447
#, c-format
msgid ""
"Goal of this wizard is to easily create a new special printer Samba share."
msgstr ""

#: standalone/draksambashare:455
#, c-format
msgid "A PDF generator already exists."
msgstr ""

#: standalone/draksambashare:479
#, c-format
msgid "Printers and print$ already exist."
msgstr ""

#: standalone/draksambashare:530
#, c-format
msgid "The wizard successfully added the printer Samba share"
msgstr ""

#: standalone/draksambashare:553
#, c-format
msgid "Please add or select a Samba printer share to be able to modify it."
msgstr ""

#: standalone/draksambashare:589
#, c-format
msgid "Printer share"
msgstr ""

#: standalone/draksambashare:592
#, c-format
msgid "Printer name:"
msgstr "Імя прынтэра:"

#: standalone/draksambashare:598 standalone/draksambashare:779
#, fuzzy, c-format
msgid "Writable:"
msgstr "Запіс"

#: standalone/draksambashare:599 standalone/draksambashare:780
#, fuzzy, c-format
msgid "Browseable:"
msgstr "Прагляд"

#: standalone/draksambashare:604
#, c-format
msgid "Advanced options"
msgstr ""

#: standalone/draksambashare:606
#, c-format
msgid "Printer access"
msgstr ""

#: standalone/draksambashare:610
#, c-format
msgid "Guest ok:"
msgstr ""

#: standalone/draksambashare:611
#, c-format
msgid "Create mode:"
msgstr ""

#: standalone/draksambashare:615
#, c-format
msgid "Printer command"
msgstr ""

#: standalone/draksambashare:617
#, c-format
msgid "Print command:"
msgstr ""

#: standalone/draksambashare:618
#, c-format
msgid "LPQ command:"
msgstr ""

#: standalone/draksambashare:619
#, c-format
msgid "Printing:"
msgstr ""

#: standalone/draksambashare:635
#, c-format
msgid "create mode should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:697
#, c-format
msgid "DrakSamba entry"
msgstr ""

#: standalone/draksambashare:702
#, c-format
msgid "Please add or select a Samba share to be able to modify it."
msgstr ""

#: standalone/draksambashare:725
#, fuzzy, c-format
msgid "Samba user access"
msgstr "NIS сэервер:"

#: standalone/draksambashare:733
#, fuzzy, c-format
msgid "Mask options"
msgstr "Захаваць усталёўкі"

#: standalone/draksambashare:747
#, fuzzy, c-format
msgid "Display options"
msgstr "Пазначце параметры"

#: standalone/draksambashare:769
#, fuzzy, c-format
msgid "Samba share directory"
msgstr "Ня тэчка"

#: standalone/draksambashare:772
#, fuzzy, c-format
msgid "Share name:"
msgstr "Імя для размеркаванага рэсурсу"

#: standalone/draksambashare:778
#, c-format
msgid "Public:"
msgstr "Публічны:"

#: standalone/draksambashare:802
#, c-format
msgid ""
"Create mask, create mode and directory mask should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:809
#, c-format
msgid "Please create this Samba user: %s"
msgstr ""

#: standalone/draksambashare:932
#, c-format
msgid "User information"
msgstr "Зьвесткі аб карыстальніке"

#: standalone/draksambashare:934
#, c-format
msgid "User name:"
msgstr "Імя карыстальніка(цы):"

#: standalone/draksambashare:935 standalone/harddrake2:601
#, c-format
msgid "Password:"
msgstr "Пароль:"

#: standalone/draksambashare:1135
#, c-format
msgid "Failed to add Samba share."
msgstr ""

#: standalone/draksambashare:1144
#, c-format
msgid "Failed to Modify Samba share."
msgstr ""

#: standalone/draksambashare:1153
#, c-format
msgid "Failed to remove a Samba share."
msgstr ""

#: standalone/draksambashare:1160
#, c-format
msgid "File share"
msgstr ""

#: standalone/draksambashare:1168
#, c-format
msgid "Add printers"
msgstr ""

#: standalone/draksambashare:1174
#, c-format
msgid "Failed to add printers."
msgstr ""

#: standalone/draksambashare:1183
#, c-format
msgid "Failed to Modify."
msgstr ""

#: standalone/draksambashare:1192
#, c-format
msgid "Failed to remove."
msgstr ""

#: standalone/draksambashare:1199
#, c-format
msgid "Printers"
msgstr "Прынтэры"

#: standalone/draksambashare:1207
#, c-format
msgid "Change password"
msgstr ""

#: standalone/draksambashare:1212
#, c-format
msgid "Failed to change user password."
msgstr ""

#: standalone/draksambashare:1220
#, c-format
msgid "Failed to add user."
msgstr ""

#: standalone/draksambashare:1223
#, c-format
msgid "Delete user"
msgstr ""

#: standalone/draksambashare:1232
#, c-format
msgid "Failed to delete user."
msgstr ""

#: standalone/draksambashare:1244
#, c-format
msgid "Samba Users"
msgstr ""

#: standalone/draksambashare:1253
#, c-format
msgid "DrakSamba manage Samba shares"
msgstr ""

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:51
#, fuzzy, c-format
msgid "NONE"
msgstr "Той сама GNOME"

#: standalone/draksec:53 standalone/net_applet:480
#, c-format
msgid "Ignore"
msgstr "Ігнараваць"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:103
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:156 standalone/harddrake2:208
#, fuzzy, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr "Апісанне:"

#: standalone/draksec:170
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr "Па ўмаўчанні - %s"

#: standalone/draksec:212
#, fuzzy, c-format
msgid "Security Level:"
msgstr "Бясьпека"

#: standalone/draksec:219
#, fuzzy, c-format
msgid "Security Administrator:"
msgstr "Сістэмнае адміністраваньне"

#: standalone/draksec:221
#, fuzzy, c-format
msgid "Basic options"
msgstr "Захаваць усталёўкі"

#: standalone/draksec:235
#, fuzzy, c-format
msgid "Network Options"
msgstr "Сетка"

#: standalone/draksec:235
#, fuzzy, c-format
msgid "System Options"
msgstr "Выкарыстоўваць існуючы раздзел"

#: standalone/draksec:270
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:300
#, c-format
msgid "Please wait, setting security level..."
msgstr ""

#: standalone/draksec:306
#, c-format
msgid "Please wait, setting security options..."
msgstr ""

#: standalone/draksound:47
#, fuzzy, c-format
msgid "No Sound Card detected!"
msgstr "Няма вузла каб выдаліць"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""

#: standalone/draksplash:30
#, c-format
msgid "x coordinate of text box"
msgstr ""

#: standalone/draksplash:31
#, c-format
msgid "y coordinate of text box"
msgstr ""

#: standalone/draksplash:32
#, c-format
msgid "text box width"
msgstr ""

#: standalone/draksplash:33
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:34
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:35
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:36
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:37
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:38
#, c-format
msgid "x coordinate of the text"
msgstr ""

#: standalone/draksplash:39
#, c-format
msgid "y coordinate of the text"
msgstr ""

#: standalone/draksplash:40
#, c-format
msgid "text box transparency"
msgstr ""

#: standalone/draksplash:41
#, c-format
msgid "progress box transparency"
msgstr ""

#: standalone/draksplash:42
#, c-format
msgid "text size"
msgstr ""

#: standalone/draksplash:59
#, c-format
msgid "Choose progress bar color 1"
msgstr ""

#: standalone/draksplash:60
#, c-format
msgid "Choose progress bar color 2"
msgstr ""

#: standalone/draksplash:61
#, c-format
msgid "Choose progress bar background"
msgstr ""

#: standalone/draksplash:62
#, c-format
msgid "Gradient type"
msgstr ""

#: standalone/draksplash:63
#, c-format
msgid "Choose text color"
msgstr ""

#: standalone/draksplash:65 standalone/draksplash:72
#, c-format
msgid "Choose picture"
msgstr ""

#: standalone/draksplash:66
#, c-format
msgid "Silent bootsplash"
msgstr ""

#: standalone/draksplash:69
#, c-format
msgid "Choose text zone color"
msgstr ""

#: standalone/draksplash:70
#, c-format
msgid "Text color"
msgstr "Колер тэксту:"

#: standalone/draksplash:71
#, c-format
msgid "Background color"
msgstr "Колер тла"

#: standalone/draksplash:73
#, c-format
msgid "Verbose bootsplash"
msgstr ""

#: standalone/draksplash:75
#, c-format
msgid "Display logo on Console"
msgstr ""

#: standalone/draksplash:78
#, c-format
msgid "Console bootsplash"
msgstr ""

#: standalone/draksplash:84
#, fuzzy, c-format
msgid "Theme name"
msgstr "Мэнэджэр тэм"

#: standalone/draksplash:87
#, fuzzy, c-format
msgid "final resolution"
msgstr "Памеры экрану"

#: standalone/draksplash:92
#, fuzzy, c-format
msgid "Save theme"
msgstr "Тэма"

#: standalone/draksplash:153
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:162
#, c-format
msgid "Unable to load image file %s"
msgstr ""

#: standalone/draksplash:173
#, c-format
msgid "choose image"
msgstr ""

#: standalone/draksplash:188
#, c-format
msgid "Color selection"
msgstr ""

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "Аўдыяпрылада:"

#: standalone/drakups:83
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:93
#, fuzzy, c-format
msgid "Autodetection"
msgstr "Аўтаматычнае вызначэнне"

#: standalone/drakups:101 standalone/harddrake2:376
#, fuzzy, c-format
msgid "Detection in progress"
msgstr "Стварэньне меню ўжо запушчана"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, c-format
msgid "No new UPS devices was found"
msgstr ""

#: standalone/drakups:128 standalone/drakups:140
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "Настройка драйверу Sun"

#: standalone/drakups:128
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "калі ласка, пазначце тып вашай мышы."

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr ""

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "Імя:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr ""

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "Порт:"

#: standalone/drakups:149
#, c-format
msgid "The port on which is connected your ups"
msgstr ""

#: standalone/drakups:159
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS devices"
msgstr "USB прылады"

#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "Назва"

#: standalone/drakups:269
#, fuzzy, c-format
msgid "UPS users"
msgstr "Стыль"

#: standalone/drakups:285
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "Акцэсуары"

#: standalone/drakups:286
#, fuzzy, c-format
msgid "IP mask"
msgstr "Відарысы"

#: standalone/drakups:298
#, c-format
msgid "Rules"
msgstr "Правілы"

#: standalone/drakups:299
#, c-format
msgid "Action"
msgstr "Дзеяньні"

#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "Узровень"

#: standalone/drakups:299
#, fuzzy, c-format
msgid "ACL name"
msgstr "Анімэ"

#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "Dvorak (US)"

#: standalone/drakups:339
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "Dvorak"

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr ""

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:101
#, fuzzy, c-format
msgid "disable"
msgstr "(адмовіць)"

#: standalone/drakvpn:101 standalone/drakvpn:127
#, fuzzy, c-format
msgid "reconfigure"
msgstr "Настроіць панэль"

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr ""

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr ""

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr ""

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakvpn:127
#, fuzzy, c-format
msgid "enable"
msgstr "(дазволіць)"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr ""

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr ""

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "Індыкатар гучнасьці"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr "Праблемы з усталяваннем пакету %s"

#: standalone/drakvpn:278
#, fuzzy, c-format
msgid "Security Policies"
msgstr "Бясьпека"

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:281 standalone/drakvpn:292
#, fuzzy, c-format
msgid "Configuration file"
msgstr "Канфігурацыя"

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:311 standalone/drakvpn:671
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s сектараў"

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Commit"
msgstr "Фіксацыя"

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr ""

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "config setup"
msgstr "Настроіць панэль"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "conn %default"
msgstr "Па дамаўленню"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "normal conn"
msgstr "Інфармацыя"

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, fuzzy, c-format
msgid "Exists!"
msgstr "Выход"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:391
#, fuzzy, c-format
msgid "interfaces"
msgstr "Сеткавыя інтэрфэйсы"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:394
#, fuzzy, c-format
msgid "plutoload"
msgstr "загрузіць"

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:437
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:439
#, fuzzy, c-format
msgid "compress"
msgstr "Gnometris"

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "зьлева"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:477
#, fuzzy, c-format
msgid "section name"
msgstr "Імя злучэння"

#: standalone/drakvpn:478
#, c-format
msgid "authby"
msgstr ""

#: standalone/drakvpn:479
#, fuzzy, c-format
msgid "auto"
msgstr "Дзеяньні"

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr "зправа"

#: standalone/drakvpn:486
#, fuzzy, c-format
msgid "rightcert"
msgstr "Прынтэр"

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:562 standalone/drakvpn:812
#, fuzzy, c-format
msgid "Edit section"
msgstr "Рэдагаваць вылучаны радок"

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, fuzzy, c-format
msgid "Section names"
msgstr "Імя злучэння"

#: standalone/drakvpn:576
#, c-format
msgid "Can not edit!"
msgstr ""

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:642 standalone/drakvpn:859
#, fuzzy, c-format
msgid "Remove section"
msgstr "Аддалены прынтэр"

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:721
#, fuzzy, c-format
msgid "path"
msgstr "Шлях:"

#: standalone/drakvpn:721
#, fuzzy, c-format
msgid "remote"
msgstr "Стварыць"

#: standalone/drakvpn:721
#, fuzzy, c-format
msgid "sainfo"
msgstr "Інфармацыя"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:732
#, c-format
msgid "path type"
msgstr ""

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:756 standalone/drakvpn:849
#, fuzzy, c-format
msgid "real file"
msgstr "Абярыце файл"

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:927
#, c-format
msgid "Sainfo source protocol"
msgstr ""

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:960
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:982
#, c-format
msgid "Lifetime number"
msgstr ""

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1019
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "Аўтэнтыфікацыя"

#: standalone/drakvpn:1021
#, fuzzy, c-format
msgid "Compression algorithm"
msgstr "Сэанс"

#: standalone/drakvpn:1022
#, fuzzy, c-format
msgid "deflate"
msgstr "Па дамаўленню"

#: standalone/drakvpn:1029
#, fuzzy, c-format
msgid "Remote"
msgstr "Аддалены прынтэр"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1038
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "Рэжым злучэння"

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1046
#, fuzzy, c-format
msgid "Generate policy"
msgstr "Асноўныя пашырэнні"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr ""

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "on"
msgstr "на"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1062
#, fuzzy, c-format
msgid "Passive"
msgstr "Прыпыніць"

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1067
#, fuzzy, c-format
msgid "Certificate type"
msgstr "Вызначыць тып файлу:"

#: standalone/drakvpn:1069
#, fuzzy, c-format
msgid "My certfile"
msgstr "MM Series"

#: standalone/drakvpn:1070
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "Імя друкаркі"

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1072
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "Імя друкаркі"

#: standalone/drakvpn:1073
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "Абярыце файл"

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1075
#, fuzzy, c-format
msgid "Verify cert"
msgstr "вельмі добра"

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1100
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "Прынтэры"

#: standalone/drakvpn:1101
#, fuzzy, c-format
msgid "Proposal"
msgstr "Пратакол"

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1112
#, fuzzy, c-format
msgid "DH group"
msgstr "Выберыце групу"

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "Каманда"

#: standalone/drakvpn:1120
#, fuzzy, c-format
msgid "Source IP range"
msgstr "Мэнэджэр сэрвісаў"

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1122
#, c-format
msgid "Upper-layer protocol"
msgstr ""

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, fuzzy, c-format
msgid "any"
msgstr "Панэль"

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "Сьцяг"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr "Накірунак"

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "ipsec"
msgstr "Шум"

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "discard"
msgstr "Майстар стварэння"

#: standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr "Рэжым"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "tunnel"
msgstr "няма"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "transport"
msgstr "gtranslator"

#: standalone/drakvpn:1131
#, fuzzy, c-format
msgid "Source/destination"
msgstr "Інфармацыя аб гуку"

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr "Па дамаўленню"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "use"
msgstr "Мыш"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "unique"
msgstr "Марцінік"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr ""

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "USA (cable)"
msgstr "(дазволіць)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr ""

#: standalone/drakxtv:45
#, fuzzy, c-format
msgid "Canada (cable)"
msgstr "Канадскі (Квебэк)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr ""

#: standalone/drakxtv:46
#, fuzzy, c-format
msgid "Japan (cable)"
msgstr "(дазволіць)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr ""

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr ""

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr ""

#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "France [SECAM]"
msgstr "Францыя"

#: standalone/drakxtv:48
#, fuzzy, c-format
msgid "Newzealand"
msgstr "Новая Зэляндыя"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr ""

#: standalone/drakxtv:88
#, fuzzy, c-format
msgid "Area:"
msgstr "Карэйская:"

#: standalone/drakxtv:93
#, fuzzy, c-format
msgid "Scanning for TV channels in progress..."
msgstr "Захаваньне ўжо выконваецца"

#: standalone/drakxtv:103
#, fuzzy, c-format
msgid "Scanning for TV channels"
msgstr "Адзіночны канал"

#: standalone/drakxtv:107
#, fuzzy, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Атрымалася памылка ўпарадкавання пакетаў:"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr ""

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/finish-install:38 standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Калі ласка, абярыце тып клавіятуры."

#: standalone/harddrake2:25
#, fuzzy, c-format
msgid "Alternative drivers"
msgstr "Альтэрнатыва"

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: standalone/harddrake2:31 standalone/harddrake2:146
#, fuzzy, c-format
msgid "Bus identification"
msgstr "Аўтэнтыфікацыя"

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:39
#, c-format
msgid "this field describes the device"
msgstr ""

#: standalone/harddrake2:40
#, fuzzy, c-format
msgid "Old device file"
msgstr "Абярыце файл"

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:42
#, fuzzy, c-format
msgid "New devfs device"
msgstr "Прылада-шлюз"

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, fuzzy, c-format
msgid "Module"
msgstr "Мыш"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "Extended partitions"
msgstr "Стварэнне новага раздзелу"

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "the number of extended partitions"
msgstr "Не хапае прасторы для стварэння новых раздзелаў"

#: standalone/harddrake2:48
#, fuzzy, c-format
msgid "Geometry"
msgstr "Рэтра"

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:49
#, fuzzy, c-format
msgid "Disk controller"
msgstr "Кіраванне"

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr ""

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:224
#, c-format
msgid "Model"
msgstr "Мадэль"

#: standalone/harddrake2:51
#, c-format
msgid "hard disk model"
msgstr ""

#: standalone/harddrake2:52
#, fuzzy, c-format
msgid "network printer port"
msgstr "Сеткавы прынтэр (TCP/Socket)"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "Primary partitions"
msgstr "Фарматаванне раздзелаў"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "the number of the primary partitions"
msgstr "Першы сектар загрузачнага раздзелу"

#: standalone/harddrake2:54
#, fuzzy, c-format
msgid "the vendor name of the device"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr ""

#: standalone/harddrake2:55
#, fuzzy, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device #"
msgstr "USB прылады"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device number"
msgstr "Нумар тэлефону"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "PCI function number"
msgstr "Імя злучэння"

#: standalone/harddrake2:58
#, fuzzy, c-format
msgid "Vendor ID"
msgstr "Рэдактары"

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "Device ID"
msgstr "Прылада:"

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "this is the numerical identifier of the device"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "USB прылады"

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: standalone/harddrake2:62
#, fuzzy, c-format
msgid "Device USB ID"
msgstr "Прылада:"

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:67
#, fuzzy, c-format
msgid "Cache size"
msgstr "памер блоку"

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr ""

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: standalone/harddrake2:72
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "узровень"

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr "Сьцягі"

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr ""

#: standalone/harddrake2:84
#, fuzzy, c-format
msgid "Model name"
msgstr "Уласнае імя"

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr ""

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr ""

#: standalone/harddrake2:86
#, fuzzy, c-format
msgid "Processor ID"
msgstr "Працэсар"

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr ""

#: standalone/harddrake2:87
#, fuzzy, c-format
msgid "Model stepping"
msgstr "Настройкі мышы"

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr ""

#: standalone/harddrake2:89
#, fuzzy, c-format
msgid "Write protection"
msgstr "Прынтэры"

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:93
#, fuzzy, c-format
msgid "Floppy format"
msgstr "Фарматаваньне гнуткіх дыскаў"

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:97
#, c-format
msgid "Channel"
msgstr "Канал"

#: standalone/harddrake2:97
#, fuzzy, c-format
msgid "EIDE/SCSI channel"
msgstr "Двайны канал"

#: standalone/harddrake2:98
#, fuzzy, c-format
msgid "Disk identifier"
msgstr "Прынтэры"

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:99
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "Гульня ў косьці"

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, fuzzy, c-format
msgid "Installed size"
msgstr "Усталяванне сістэмы"

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:107
#, fuzzy, c-format
msgid "Enabled Size"
msgstr "Дазволіць пашырэнне"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, fuzzy, c-format
msgid "type of the memory device"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr "Хуткасьць"

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:110
#, fuzzy, c-format
msgid "Bank connections"
msgstr "Размеркаванне"

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:115
#, fuzzy, c-format
msgid "Device file"
msgstr "Абярыце файл"

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "whether the wheel is emulated or not"
msgstr ""

#: standalone/harddrake2:117
#, fuzzy, c-format
msgid "the type of the mouse"
msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."

#: standalone/harddrake2:118
#, fuzzy, c-format
msgid "the name of the mouse"
msgstr "Выкарыстаць альтэрнатыўную прыладу"

#: standalone/harddrake2:119
#, fuzzy, c-format
msgid "Number of buttons"
msgstr "2 кнопкі"

#: standalone/harddrake2:119
#, c-format
msgid "the number of buttons the mouse has"
msgstr ""

#: standalone/harddrake2:120
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:342
#, fuzzy, c-format
msgid "Identification"
msgstr "Аўтэнтыфікацыя"

#: standalone/harddrake2:129 standalone/harddrake2:145
#, fuzzy, c-format
msgid "Connection"
msgstr "Імя злучэння"

#: standalone/harddrake2:138
#, fuzzy, c-format
msgid "Performances"
msgstr "Усталяваньні"

#: standalone/harddrake2:139
#, fuzzy, c-format
msgid "Bugs"
msgstr "Прац."

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr ""

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "Прылада"

#: standalone/harddrake2:148
#, fuzzy, c-format
msgid "Partitions"
msgstr "Раздзел %s"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr "Магчымасьці"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:146 standalone/printerdrake:159
#: standalone/printerdrake:171
#, c-format
msgid "/_Options"
msgstr "/_Налады"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:172 standalone/printerdrake:174
#: standalone/printerdrake:177 standalone/printerdrake:179
#, c-format
msgid "/_Help"
msgstr "/_Дапамога"

#: standalone/harddrake2:181
#, fuzzy, c-format
msgid "/Autodetect _printers"
msgstr "Аддалены прынтэр"

#: standalone/harddrake2:182
#, c-format
msgid "/Autodetect _modems"
msgstr ""

#: standalone/harddrake2:183
#, c-format
msgid "/Autodetect _jaz drives"
msgstr ""

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr ""

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:192 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/_Выйсьці"

#: standalone/harddrake2:205
#, fuzzy, c-format
msgid "/_Fields description"
msgstr "Апісанне"

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr ""

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:222 standalone/printerdrake:177
#, c-format
msgid "/_Report Bug"
msgstr "/_Паведаміць пра памылку"

#: standalone/harddrake2:224 standalone/printerdrake:179
#, c-format
msgid "/_About..."
msgstr "/_Пра..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr "Пра Harddrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""

#: standalone/harddrake2:243
#, fuzzy, c-format
msgid "Harddrake2"
msgstr "Пра MenuDrake"

#: standalone/harddrake2:273
#, fuzzy, c-format
msgid "Detected hardware"
msgstr "Гл. апісанне абсталявання"

#: standalone/harddrake2:278
#, fuzzy, c-format
msgid "Configure module"
msgstr "Настройка мышы"

#: standalone/harddrake2:285
#, fuzzy, c-format
msgid "Run config tool"
msgstr "Канфігурацыя сістэмных сэрвісаў"

#: standalone/harddrake2:309
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:330 standalone/printerdrake:306
#: standalone/printerdrake:320
#, c-format
msgid "Unknown"
msgstr "Невядома"

#: standalone/harddrake2:350
#, c-format
msgid "Misc"
msgstr "Рознае"

#: standalone/harddrake2:428
#, fuzzy, c-format
msgid "secondary"
msgstr "секунд"

#: standalone/harddrake2:428
#, fuzzy, c-format
msgid "primary"
msgstr "Пятніца"

#: standalone/harddrake2:432
#, fuzzy, c-format
msgid "burner"
msgstr "Прынтэр"

#: standalone/harddrake2:432
#, c-format
msgid "DVD"
msgstr ""

#: standalone/harddrake2:512
#, c-format
msgid ""
"The following devices needs proprietary drivers or firmwares in order to "
"operate smoothly. The appropriate packages can be retrieved from the "
"Mandriva Club. Do you want to subscribe to the Mandriva Club?"
msgstr ""

#: standalone/harddrake2:595 standalone/harddrake2:598
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:600
#, c-format
msgid "Account:"
msgstr "Рахунак:"

#: standalone/harddrake2:602
#, c-format
msgid "Hostname:"
msgstr "Імя машыны:"

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?"

#: standalone/localedrake:38
#, fuzzy, c-format
msgid "LocaleDrake"
msgstr "Гульня ў косьці"

#: standalone/localedrake:44
#, fuzzy, c-format
msgid "You should install the following packages: %s"
msgstr "Праблемы з усталяваннем пакету %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: standalone/localedrake:47 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: standalone/localedrake:55
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: standalone/logdrake:49
#, fuzzy, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "Цэнтар кіраваньня"

#: standalone/logdrake:50
#, c-format
msgid "Logdrake"
msgstr ""

#: standalone/logdrake:63
#, fuzzy, c-format
msgid "Show only for the selected day"
msgstr "Ня знойдзена дадзеных для выбранага вузла"

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr "/Файл/_Стварыць"

#: standalone/logdrake:70
#, fuzzy, c-format
msgid "<control>N"
msgstr "<control>Q"

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr "/Файл/_Адкрыць"

#: standalone/logdrake:71
#, fuzzy, c-format
msgid "<control>O"
msgstr "<control>Q"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr "/Файл/_Захаваць"

#: standalone/logdrake:72
#, fuzzy, c-format
msgid "<control>S"
msgstr "<control>Q"

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr "/Файл/Захаваць _як"

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/Файл/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr "/Налады/Праверыць"

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/Дапамога/_Пра..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:115
#, fuzzy, c-format
msgid "search"
msgstr "Сакавік"

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr ""

#: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93
#, c-format
msgid "Settings"
msgstr "Усталёўкі"

#: standalone/logdrake:133
#, fuzzy, c-format
msgid "Matching"
msgstr "Нічога"

#: standalone/logdrake:134
#, fuzzy, c-format
msgid "but not matching"
msgstr "Мэнэджэр файлаў"

#: standalone/logdrake:138
#, fuzzy, c-format
msgid "Choose file"
msgstr "Выбар памераў"

#: standalone/logdrake:150
#, c-format
msgid "Calendar"
msgstr "Каляндар"

#: standalone/logdrake:160
#, fuzzy, c-format
msgid "Content of the file"
msgstr "Далучэнне да Інтэрнэту"

#: standalone/logdrake:164 standalone/logdrake:402
#, fuzzy, c-format
msgid "Mail alert"
msgstr "Калькулятар"

#: standalone/logdrake:171
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr ""

#: standalone/logdrake:224
#, c-format
msgid "please wait, parsing file: %s"
msgstr ""

#: standalone/logdrake:379
#, c-format
msgid "Apache World Wide Web Server"
msgstr ""

#: standalone/logdrake:380
#, fuzzy, c-format
msgid "Domain Name Resolver"
msgstr "Імя дамену"

#: standalone/logdrake:381
#, fuzzy, c-format
msgid "Ftp Server"
msgstr "Сервак"

#: standalone/logdrake:382
#, c-format
msgid "Postfix Mail Server"
msgstr ""

#: standalone/logdrake:383
#, fuzzy, c-format
msgid "Samba Server"
msgstr "NIS сэервер:"

#: standalone/logdrake:385
#, fuzzy, c-format
msgid "Webmin Service"
msgstr "Прылады"

#: standalone/logdrake:386
#, fuzzy, c-format
msgid "Xinetd Service"
msgstr "Сервер друку"

#: standalone/logdrake:397
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "Настроіць праверку правапісу"

#: standalone/logdrake:398
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:405
#, fuzzy, c-format
msgid "Mail alert configuration"
msgstr "Канфігурацыя"

#: standalone/logdrake:406
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""

#: standalone/logdrake:416
#, fuzzy, c-format
msgid "Services settings"
msgstr "Настройка прылады"

#: standalone/logdrake:417
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Load setting"
msgstr "Настройкі клявіятуры"

#: standalone/logdrake:425
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: standalone/logdrake:426
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:431
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "Настройка Xorg"

#: standalone/logdrake:432
#, c-format
msgid "Please enter your email address below "
msgstr ""

#: standalone/logdrake:433
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""

#: standalone/logdrake:452
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:458
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:517
#, fuzzy, c-format
msgid "Save as.."
msgstr "Захаваць спіс"

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "калі ласка, пазначце тып вашай мышы."

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "Эмуляваць трэцюю кнопку?"

#: standalone/mousedrake:61
#, fuzzy, c-format
msgid "Mouse test"
msgstr "Mouse Systems"

#: standalone/mousedrake:64
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."

#: standalone/net_applet:47
#, fuzzy, c-format
msgid "Network is up on interface %s"
msgstr "Сеткавы інтэрфейс"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, fuzzy, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "Сеткавы інтэрфейс"

#: standalone/net_applet:56 standalone/net_applet:76
#: standalone/net_monitor:468
#, fuzzy, c-format
msgid "Connect %s"
msgstr "Імя злучэння"

#: standalone/net_applet:57 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Disconnect %s"
msgstr ""

#: standalone/net_applet:58
#, fuzzy, c-format
msgid "Monitor Network"
msgstr "Сетка"

#: standalone/net_applet:60
#, c-format
msgid "Manage wireless networks"
msgstr ""

#: standalone/net_applet:61
#, fuzzy, c-format
msgid "Configure Network"
msgstr "Настройка сеткі"

#: standalone/net_applet:63
#, fuzzy, c-format
msgid "Watched interface"
msgstr "Сеткавыя інтэрфэйсы"

#: standalone/net_applet:93
#, c-format
msgid "Profiles"
msgstr "Профілі"

#: standalone/net_applet:102
#, c-format
msgid "Get Online Help"
msgstr ""

#: standalone/net_applet:335
#, c-format
msgid "Interactive Firewall automatic mode"
msgstr ""

#: standalone/net_applet:340
#, c-format
msgid "Always launch on startup"
msgstr ""

#: standalone/net_applet:344
#, fuzzy, c-format
msgid "Wireless networks"
msgstr "Канфігурацыя"

#: standalone/net_applet:429
#, fuzzy, c-format
msgid "Interactive Firewall: intrusion detected"
msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"

#: standalone/net_applet:442
#, fuzzy, c-format
msgid "What do you want to do with this attacker?"
msgstr "Вы жадаеце скончыць гульню?"

#: standalone/net_applet:445
#, fuzzy, c-format
msgid "Attack details"
msgstr "Падрабязнасці"

#: standalone/net_applet:449
#, fuzzy, c-format
msgid "Attack time: %s"
msgstr "Укласьці файл(ы)"

#: standalone/net_applet:450
#, c-format
msgid "Network interface: %s"
msgstr "Сеткавы інтэрфейс: %s"

#: standalone/net_applet:451
#, fuzzy, c-format
msgid "Attack type: %s"
msgstr "Тып: "

#: standalone/net_applet:452
#, c-format
msgid "Protocol: %s"
msgstr "Пратакол: %s"

#: standalone/net_applet:453
#, fuzzy, c-format
msgid "Attacker IP address: %s"
msgstr "IP адрас"

#: standalone/net_applet:454
#, fuzzy, c-format
msgid "Attacker hostname: %s"
msgstr "Адбыўся збой пад час атрыманьня назвы вузла: %s\n"

#: standalone/net_applet:457
#, fuzzy, c-format
msgid "Service attacked: %s"
msgstr "Кіраваньне сэрвісамі"

#: standalone/net_applet:458
#, fuzzy, c-format
msgid "Port attacked: %s"
msgstr "Порт:"

#: standalone/net_applet:460
#, c-format
msgid "Type of ICMP attack: %s"
msgstr ""

#: standalone/net_applet:465
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr ""

#: standalone/net_monitor:57 standalone/net_monitor:62
#, fuzzy, c-format
msgid "Network Monitoring"
msgstr "Канфігурацыя сеткі"

#: standalone/net_monitor:98
#, c-format
msgid "Global statistics"
msgstr ""

#: standalone/net_monitor:101
#, c-format
msgid "Instantaneous"
msgstr ""

#: standalone/net_monitor:101
#, fuzzy, c-format
msgid "Average"
msgstr "Альтэрнатыўны"

#: standalone/net_monitor:102
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""

#: standalone/net_monitor:103
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""

#: standalone/net_monitor:107
#, fuzzy, c-format
msgid ""
"Connection\n"
"time: "
msgstr "Імя злучэння"

#: standalone/net_monitor:114
#, c-format
msgid "Use same scale for received and transmitted"
msgstr ""

#: standalone/net_monitor:133
#, c-format
msgid "Wait please, testing your connection..."
msgstr ""

#: standalone/net_monitor:182 standalone/net_monitor:195
#, fuzzy, c-format
msgid "Disconnecting from Internet "
msgstr "Далучэнне да Інтэрнэту"

#: standalone/net_monitor:182 standalone/net_monitor:195
#, fuzzy, c-format
msgid "Connecting to Internet "
msgstr "Далучэнне да Інтэрнэту"

#: standalone/net_monitor:226
#, c-format
msgid "Disconnection from Internet failed."
msgstr ""

#: standalone/net_monitor:227
#, c-format
msgid "Disconnection from Internet complete."
msgstr ""

#: standalone/net_monitor:229
#, fuzzy, c-format
msgid "Connection complete."
msgstr "Імя злучэння"

#: standalone/net_monitor:230
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandriva Linux Control Center."
msgstr ""

#: standalone/net_monitor:335
#, fuzzy, c-format
msgid "Color configuration"
msgstr "Канфігурацыя"

#: standalone/net_monitor:383 standalone/net_monitor:403
#, fuzzy, c-format
msgid "sent: "
msgstr "Эсперанто:"

#: standalone/net_monitor:390 standalone/net_monitor:407
#, c-format
msgid "received: "
msgstr ""

#: standalone/net_monitor:397
#, c-format
msgid "average"
msgstr ""

#: standalone/net_monitor:400
#, fuzzy, c-format
msgid "Local measure"
msgstr "Гульня ў косьці"

#: standalone/net_monitor:461
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: standalone/net_monitor:472
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "Сумеснае Інтэрнэт-злучэнне"

#: standalone/printerdrake:76
#, fuzzy, c-format
msgid "Reading data of installed printers..."
msgstr "Стварэнне дыскеты для ўсталявання"

#: standalone/printerdrake:128
#, fuzzy, c-format
msgid "%s Printer Management Tool"
msgstr "Мэнэджэр тэм"

#: standalone/printerdrake:142 standalone/printerdrake:143
#: standalone/printerdrake:144 standalone/printerdrake:145
#: standalone/printerdrake:153 standalone/printerdrake:154
#: standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/_Дзеяньні"

#: standalone/printerdrake:142 standalone/printerdrake:154
#, c-format
msgid "/_Add Printer"
msgstr "/_Дадаць друкарку"

#: standalone/printerdrake:143
#, c-format
msgid "/Set as _Default"
msgstr "/Зрабіць _дапомным"

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/_Рэдагаваць"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/_Выдаліць"

#: standalone/printerdrake:146
#, c-format
msgid "/_Expert mode"
msgstr ""

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/_Аднавіць"

#: standalone/printerdrake:158
#, c-format
msgid "/_Configure CUPS"
msgstr "/_Наладзіць CUPS"

#: standalone/printerdrake:171
#, fuzzy, c-format
msgid "/Configure _Auto Administration"
msgstr "Сістэмнае адміністраваньне"

#: standalone/printerdrake:194
#, c-format
msgid "Search:"
msgstr "Шукаць:"

#: standalone/printerdrake:197
#, c-format
msgid "Apply filter"
msgstr "Ужыць фільтар"

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Printer Name"
msgstr "Назва друкаркі"

#: standalone/printerdrake:224
#, c-format
msgid "Connection Type"
msgstr "Тып далучэньня"

#: standalone/printerdrake:231
#, fuzzy, c-format
msgid "Server Name"
msgstr "Сервак"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:239
#, fuzzy, c-format
msgid "Add Printer"
msgstr "Прынтэр"

#: standalone/printerdrake:239
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "Дадаць карыстальніка ў сыстэму"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, c-format
msgid "Set as default"
msgstr "Усталяваць як дапомнае"

#: standalone/printerdrake:242
#, c-format
msgid "Set selected printer as the default printer"
msgstr ""

#: standalone/printerdrake:245
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "Рэдагаваць вылучаны радок"

#: standalone/printerdrake:248
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "Выдаліць вылучаны радок"

#: standalone/printerdrake:251
#, c-format
msgid "Refresh the list"
msgstr "Аднавіць сьпіс"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:254
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "Настройка IDE"

#: standalone/printerdrake:254
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "Настройка IDE"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Enabled"
msgstr "Уключана"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Disabled"
msgstr "Выключана"

#: standalone/printerdrake:596
#, c-format
msgid "Authors: "
msgstr "Аўтары: "

#. -PO: here %s is the version number
#: standalone/printerdrake:606
#, fuzzy, c-format
msgid "Printer Management %s"
msgstr "Мэнэджэр файлаў"

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr ""

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: standalone/scannerdrake:67 standalone/scannerdrake:491
#, c-format
msgid "Searching for configured scanners..."
msgstr ""

#: standalone/scannerdrake:71 standalone/scannerdrake:495
#, c-format
msgid "Searching for new scanners..."
msgstr ""

#: standalone/scannerdrake:79 standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr ""

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr ""

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr ""

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr ""

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr ""

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "Порт: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr ""

#: standalone/scannerdrake:144
#, fuzzy, c-format
msgid "The %s is not supported under Linux."
msgstr "%s непадтрымліваецца гэтым дыялёгам\n"

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr ""

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr ""

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr ""

#: standalone/scannerdrake:200
#, fuzzy, c-format
msgid "Select firmware file"
msgstr "Абярыце файл"

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr ""

#: standalone/scannerdrake:258
#, fuzzy, c-format
msgid "Select firmware file for the %s"
msgstr "Усталяваць шрыфт для стальца"

#: standalone/scannerdrake:276
#, fuzzy, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "Усталяваць шрыфт для стальца"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr ""

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr ""

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""

#: standalone/scannerdrake:308 standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, c-format
msgid "Auto-detect available ports"
msgstr ""

#: standalone/scannerdrake:310 standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr ""

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""

#: standalone/scannerdrake:313 standalone/scannerdrake:358
#, fuzzy, c-format
msgid "choose device"
msgstr "Загрузачная прылада"

#: standalone/scannerdrake:347
#, fuzzy, c-format
msgid "Searching for scanners..."
msgstr "Адшукаць файлы на дыску"

#: standalone/scannerdrake:383
#, fuzzy, c-format
msgid "Setting up kernel modules..."
msgstr "Індыкатар гучнасьці"

#: standalone/scannerdrake:390 standalone/scannerdrake:397
#, fuzzy, c-format
msgid "Attention!"
msgstr "Атракцыён"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:392 standalone/scannerdrake:401
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""

#: standalone/scannerdrake:394 standalone/scannerdrake:403
#, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:398
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""

#: standalone/scannerdrake:399
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:406
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:431
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""

#: standalone/scannerdrake:432
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""

#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr ""

#: standalone/scannerdrake:452
#, fuzzy, c-format
msgid "Search for new scanners"
msgstr "Адшукаць файлы на дыску"

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr ""

#: standalone/scannerdrake:465
#, c-format
msgid "Install/Update firmware files"
msgstr ""

#: standalone/scannerdrake:471
#, fuzzy, c-format
msgid "Scanner sharing"
msgstr "Сан Марына"

#: standalone/scannerdrake:530 standalone/scannerdrake:695
#, fuzzy, c-format
msgid "All remote machines"
msgstr "Мэнэджэр файлаў"

#: standalone/scannerdrake:542 standalone/scannerdrake:845
#, c-format
msgid "This machine"
msgstr ""

#: standalone/scannerdrake:582
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:583
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr ""

#: standalone/scannerdrake:588
#, c-format
msgid "Scanner sharing to hosts: "
msgstr ""

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr ""

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr ""

#: standalone/scannerdrake:632 standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, c-format
msgid "Sharing of local scanners"
msgstr ""

#: standalone/scannerdrake:633
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:644 standalone/scannerdrake:794
#, fuzzy, c-format
msgid "Add host"
msgstr "Дадаць карыстальніка"

#: standalone/scannerdrake:650 standalone/scannerdrake:800
#, fuzzy, c-format
msgid "Edit selected host"
msgstr "Рэдагаваць вылучаны радок"

#: standalone/scannerdrake:659 standalone/scannerdrake:809
#, fuzzy, c-format
msgid "Remove selected host"
msgstr "/Выдаліць/Выбранае"

#: standalone/scannerdrake:683 standalone/scannerdrake:691
#: standalone/scannerdrake:696 standalone/scannerdrake:742
#: standalone/scannerdrake:833 standalone/scannerdrake:841
#: standalone/scannerdrake:846 standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr ""

#: standalone/scannerdrake:705 standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:716 standalone/scannerdrake:866
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr ""

#: standalone/scannerdrake:727 standalone/scannerdrake:877
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""

#: standalone/scannerdrake:782
#, fuzzy, c-format
msgid "Usage of remote scanners"
msgstr "Выкарыстоўваць незанятую прастору"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: standalone/scannerdrake:940
#, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""

#: standalone/scannerdrake:944 standalone/scannerdrake:948
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: standalone/service_harddrake:105
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: standalone/service_harddrake:106
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:109
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "Мыш: %s\n"

#: standalone/service_harddrake:110
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:208
#, c-format
msgid "Hardware probing in progress"
msgstr ""

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "Ці жадаеце пратэсціраваць настройкі?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Выбар мовы"

#: steps.pm:15
#, fuzzy, c-format
msgid "License"
msgstr "Ліхтэнштайн"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Настройка мышы"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Вызначэнне жорсткага дыску"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Клас усталявання"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Выбар клавіятуры"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Фарматаванне раздзелаў"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Выбар пакетаў"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Усталяванне сістэмы"

#: steps.pm:25
#, fuzzy, c-format
msgid "Administrator password"
msgstr "Пароль для root"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Дадаць карыстальніка"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Настройка сеткі"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Усталяванне загрузчыку"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Настройка X Window"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Настройка службаў"

#: steps.pm:32
#, fuzzy, c-format
msgid "Install updates"
msgstr "Усталяванне сістэмы"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Заканчэнне ўсталявання"

#: ugtk2.pm:899
#, c-format
msgid "Is this correct?"
msgstr "Гэта дакладна?"

#: ugtk2.pm:959
#, fuzzy, c-format
msgid "No file chosen"
msgstr "абіральнік файла"

#: ugtk2.pm:961
#, fuzzy, c-format
msgid "You have chosen a file, not a directory"
msgstr "Няма такога файла ці тэчкі"

#: ugtk2.pm:963
#, fuzzy, c-format
msgid "You have chosen a directory, not a file"
msgstr "Назва \"/\" можа быць толькі каталёгам, а ня ключом"

#: ugtk2.pm:965
#, fuzzy, c-format
msgid "No such directory"
msgstr "Ня тэчка"

#: ugtk2.pm:965
#, fuzzy, c-format
msgid "No such file"
msgstr "Няма гэткага ключа '%s'\n"

#: ugtk2.pm:1046
#, c-format
msgid "Expand Tree"
msgstr "Разгарнуць дрэва"

#: ugtk2.pm:1047
#, c-format
msgid "Collapse Tree"
msgstr "Згарнуць дрэва"

#: ugtk2.pm:1048
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Пераключэнне паміж упарадкаваннем па групе і асобках"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""

#: wizards.pm:99
#, fuzzy, c-format
msgid "Installation failed"
msgstr "Усталяванне SILO"

#, fuzzy
#~ msgid "Unknown Model"
#~ msgstr "Невядомая гукавая карта"

#, fuzzy
#~ msgid "Installing mtools packages..."
#~ msgstr "Усталяванне пакету %s"

#~ msgid "http://www.mandrivalinux.com/en/errata.php3"
#~ msgstr "http://www.mandrivalinux.com/en/errata.php3"

#, fuzzy
#~ msgid "Default Idmap "
#~ msgstr "Скура Па ўмаўчанні"

#, fuzzy
#~ msgid "Please wait, preparing installation..."
#~ msgstr "Падрыхтоўка ўсталяваньня"

#~ msgid "Installing package %s"
#~ msgstr "Усталяванне пакету %s"

#~ msgid "Welcome to <b>Mandriva Linux</b>!"
#~ msgstr "Сардэчна запрашаем у <b>Mandriva Linux</b>!"

#, fuzzy
#~ msgid "<b>Mandriva Products</b>"
#~ msgstr "Цэнтар кіраваньня"

#~ msgid "<b>Kontact</b>"
#~ msgstr "<b>Кантакт</b>"

#, fuzzy
#~ msgid "<b>Surf the Internet</b>"
#~ msgstr "Інтэрнэт"

#, fuzzy
#~ msgid "<b>Development Environments</b>"
#~ msgstr "Распрацоўка"

#, fuzzy
#~ msgid "<b>Development Editors</b>"
#~ msgstr "Распрацоўка"

#, fuzzy
#~ msgid "<b>Development Languages</b>"
#~ msgstr "Распрацоўка"

#, fuzzy
#~ msgid "\t* Scripting languages:"
#~ msgstr "Мэнэджэр друку"

#, fuzzy
#~ msgid "<b>Development Tools</b>"
#~ msgstr "Распрацоўка"

#, fuzzy
#~ msgid "<b>Servers</b>"
#~ msgstr "Сервак"

#, fuzzy
#~ msgid "<b>Mandriva Linux Control Center</b>"
#~ msgstr "Цэнтар кіраваньня"

#, fuzzy
#~ msgid "<b>Mandriva Club</b>"
#~ msgstr "Цэнтар кіраваньня"

#, fuzzy
#~ msgid "<b>Mandriva Online</b>"
#~ msgstr "Цэнтар кіраваньня"

#, fuzzy
#~ msgid "<b>Mandriva Expert</b>"
#~ msgstr "Цэнтар кіраваньня"

#~ msgid "Key"
#~ msgstr "Клявіша"

#~ msgid "Network:"
#~ msgstr "Сетка:"

#~ msgid "IP:"
#~ msgstr "IP:"

#~ msgid "Mode:"
#~ msgstr "Рэжым:"

#~ msgid "Encryption:"
#~ msgstr "Шыфраваньне:"

#~ msgid "Signal:"
#~ msgstr "Сыгнал:"

#~ msgid "Rescan"
#~ msgstr "Перачытаць"

#~ msgid "Status"
#~ msgstr "Статус"

#~ msgid "Disconnect"
#~ msgstr "Адлучаць"

#~ msgid "Connect to the Internet"
#~ msgstr "Далучэнне да Інтэрнэту"

#, fuzzy
#~ msgid "Do not print any test page"
#~ msgstr "Друк тэставых старонак"

#, fuzzy
#~ msgid "Found printer on %s..."
#~ msgstr "Аддалены прынтэр"

#, fuzzy
#~ msgid "dhcpd Config..."
#~ msgstr "Настройка IDE"

#, fuzzy
#~ msgid "Unable to select wireless network: %s"
#~ msgstr "Немагчыма адчыніць файл %s\n"

#, fuzzy
#~ msgid "Interactive intrusion detection"
#~ msgstr "Функцыі стварэньня інтэрфэйса:"

#, fuzzy
#~ msgid "Active Firewall: intrusion detected"
#~ msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"

#, fuzzy
#~ msgid "Do you want to blacklist the attacker?"
#~ msgstr "Вы жадаеце скончыць гульню?"

#~ msgid "Grub"
#~ msgstr "Grub"

#, fuzzy
#~ msgid "Local Network adress"
#~ msgstr "Прагляд лякальнай сеткі"

#~ msgid "Configuring scripts, installing software, starting servers..."
#~ msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..."

#, fuzzy
#~ msgid "drakfloppy"
#~ msgstr "Захаванне на дыскету"

#, fuzzy
#~ msgid "Boot disk creation"
#~ msgstr "Настройка IDE"

#~ msgid "General"
#~ msgstr "Агульныя"

#, fuzzy
#~ msgid "Kernel version"
#~ msgstr "Канфігурацыя"

#~ msgid "Preferences"
#~ msgstr "Усталяваньні"

#, fuzzy
#~ msgid "Advanced preferences"
#~ msgstr "Адмысловыя ўсталяваньні"

#~ msgid "Size"
#~ msgstr "Памер"

#, fuzzy
#~ msgid "force"
#~ msgstr "Усталяваньні"

#, fuzzy
#~ msgid "Add a module"
#~ msgstr "Дадаць карыстальніка"

#, fuzzy
#~ msgid "Remove a module"
#~ msgstr "/Выдаліць дохлыя файлы"

#, fuzzy
#~ msgid "Unable to fork: %s"
#~ msgstr "Немагчыма адчыніць файл %s\n"

#~ msgid "use PPPoE"
#~ msgstr "выкарыстоўваць PPPoE"

#, fuzzy
#~ msgid "use PPTP"
#~ msgstr "выкарыстоўваць PPPoE"

#, fuzzy
#~ msgid "PXE Server Configuration"
#~ msgstr "Канфігурацыя сістэмных сэрвісаў"

#, fuzzy
#~ msgid "Installation Server Configuration"
#~ msgstr "Канфігурацыя сістэмных сэрвісаў"

#~ msgid "No network adapter on your system!"
#~ msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"

#~ msgid "Choose the network interface"
#~ msgstr "Пазначце сеткавы інтэрфейс"

#, fuzzy
#~ msgid ""
#~ "Please choose which network interface will be used for the dhcp server."
#~ msgstr ""
#~ "Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для "
#~ "далучэння да інтэрнэт"

#, fuzzy
#~ msgid "Installation image directory"
#~ msgstr "Слоўнік GNOME"

#, fuzzy
#~ msgid "Do it later"
#~ msgstr "Аб'яднанае стэрыа"

#~ msgid "Internet Connection Sharing currently disabled"
#~ msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"

#~ msgid "Internet Connection Sharing currently enabled"
#~ msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма"

#, fuzzy
#~ msgid "Interface %s"
#~ msgstr "Сеткавыя інтэрфэйсы"

#, fuzzy
#~ msgid "Network interface already configured"
#~ msgstr "Інфармацыя аб сеткавых інтэрфэйсах"

#, fuzzy
#~ msgid "Show current interface configuration"
#~ msgstr "Настройка драйверу Sun"

#, fuzzy
#~ msgid "Current interface configuration"
#~ msgstr "Настройка драйверу Sun"

#, fuzzy
#~ msgid "Re-configure interface and DHCP server"
#~ msgstr "Настройка IDE"

#, fuzzy
#~ msgid "hd"
#~ msgstr "Чад"

#, fuzzy
#~ msgid "tape"
#~ msgstr "Іншае"

#, fuzzy
#~ msgid "choose image file"
#~ msgstr "Выбар памераў"

#, fuzzy
#~ msgid "Configure bootsplash picture"
#~ msgstr "Настрйка драйверу Solaris"

#~ msgid "Preview"
#~ msgstr "Папярэдні прагляд"

#~ msgid "Choose color"
#~ msgstr "Выбярыце колер"

#~ msgid "Notice"
#~ msgstr "Заўвага"

#, fuzzy
#~ msgid "Generating preview..."
#~ msgstr "Вызначэнне прыладаў..."

#~ msgid "No floppy drive available"
#~ msgstr "Дыскавод недаступны"

#, fuzzy
#~ msgid "Please insert the Update Modules floppy in drive %s"
#~ msgstr "Устаўце дыскету ў дыскавод %s"

#, fuzzy
#~ msgid ""
#~ "_: keyboard\n"
#~ "Tifinagh (+latin/arabic)"
#~ msgstr "Азербайджанскі (latin)"

#~ msgid ""
#~ "Insert a floppy in drive\n"
#~ "All data on this floppy will be lost"
#~ msgstr ""
#~ "Устаўце дыскету ў дыскавод\n"
#~ "Усе дадзеныя на гэтай дыскеце будуць страчаны"

#~ msgid "Save on floppy"
#~ msgstr "Захаванне на дыскету"

#~ msgid "Installing HPOJ package..."
#~ msgstr "Усталяванне пакету HPOJ..."

#~ msgid "Installing HPLIP package..."
#~ msgstr "Усталяванне пакету HPLIP..."

#~ msgid "Root password"
#~ msgstr "Пароль для root"

#~ msgid "Move"
#~ msgstr "Перанос"

#~ msgid "Which disk do you want to move it to?"
#~ msgstr "На які дыск перанесці?"

#~ msgid "Sector"
#~ msgstr "Сектар"

#~ msgid "Which sector do you want to move it to?"
#~ msgstr "На які сектар перанесці?"

#~ msgid "Moving"
#~ msgstr "Пераносім"

#~ msgid "Moving partition..."
#~ msgstr "Пераносіцца раздзел..."

#~ msgid "Error opening %s for writing: %s"
#~ msgstr "Памылка адкрыцця %s для запісу: %s"

#~ msgid "OK"
#~ msgstr "Так"

#~ msgid "Czech (QWERTZ)"
#~ msgstr "Чешскі (QWERTZ)"

#~ msgid "German"
#~ msgstr "Нямецкі"

#~ msgid "Dvorak"
#~ msgstr "Dvorak"

#~ msgid "Spanish"
#~ msgstr "Іспанскі"

#~ msgid "Finnish"
#~ msgstr "Фінскі"

#~ msgid "French"
#~ msgstr "Французскі"

#~ msgid "Norwegian"
#~ msgstr "Нарвежскі"

#~ msgid "Polish"
#~ msgstr "Польскі"

#~ msgid "Russian"
#~ msgstr "Рускі"

#~ msgid "Swedish"
#~ msgstr "Швецкі"

#~ msgid "Armenian (old)"
#~ msgstr "Армянскі (стары)"

#~ msgid "Armenian (typewriter)"
#~ msgstr "Армянскі (typewriter)"

#~ msgid "Armenian (phonetic)"
#~ msgstr "Армянскі (фанетычны)"

#~ msgid "Azerbaidjani (latin)"
#~ msgstr "Азербайджанскі (latin)"

#~ msgid "Belgian"
#~ msgstr "Бельгійскі"

#~ msgid "Brazilian (ABNT-2)"
#~ msgstr "Бразільскі (ABNT-2)"

#~ msgid "Belarusian"
#~ msgstr "Беларускі"

#~ msgid "Swiss (German layout)"
#~ msgstr "Швейцарскі (Нямецкая раскладка)"

#~ msgid "Swiss (French layout)"
#~ msgstr "Швейцарскі (Французская раскладка)"

#~ msgid "Czech (QWERTY)"
#~ msgstr "Чешскі (QWERTY)"

#~ msgid "German (no dead keys)"
#~ msgstr "Нямецкі (няма заблакіраваных клавіш)"

#~ msgid "Danish"
#~ msgstr "Дацкі"

#~ msgid "Dvorak (US)"
#~ msgstr "Dvorak (US)"

#~ msgid "Dvorak (Norwegian)"
#~ msgstr "Dvorak (Нарвежскі)"

#~ msgid "Estonian"
#~ msgstr "Эстонскі"

#~ msgid "Georgian (\"Russian\" layout)"
#~ msgstr "Грузінскі (\"Руская\" раскладка)"

#~ msgid "Georgian (\"Latin\" layout)"
#~ msgstr "Грузінскі (\"Лацінская\" раскладка)"

#~ msgid "Greek"
#~ msgstr "Грэчаскі"

#~ msgid "Hungarian"
#~ msgstr "Мадьярскі"

#~ msgid "Croatian"
#~ msgstr "Харвацкі"

#~ msgid "Israeli"
#~ msgstr "Іўрыт"

#~ msgid "Israeli (Phonetic)"
#~ msgstr "Іўрыт (фанетычны)"

#~ msgid "Iranian"
#~ msgstr "Іранскі"

#~ msgid "Icelandic"
#~ msgstr "Ісландскі"

#~ msgid "Italian"
#~ msgstr "Італьянскі"

#~ msgid "Japanese 106 keys"
#~ msgstr "Японскі 106 клавіш"

#~ msgid "Latin American"
#~ msgstr "Лаціна-Амерыканскі"

#~ msgid "Lithuanian AZERTY (old)"
#~ msgstr "Літоўскі AZERTY (стары)"

#~ msgid "Lithuanian AZERTY (new)"
#~ msgstr "Літоўскі AZERTY (новы)"

#~ msgid "Lithuanian \"number row\" QWERTY"
#~ msgstr "Літоўскі \"нумар радка\" QWERTY"

#~ msgid "Lithuanian \"phonetic\" QWERTY"
#~ msgstr "Літоўскі \"фанетычны\" QWERTY"

#~ msgid "Dutch"
#~ msgstr "Галандскі"

#~ msgid "Polish (qwerty layout)"
#~ msgstr "Польскі (стандартная раскладка)"

#~ msgid "Polish (qwertz layout)"
#~ msgstr "Польскі (qwertz раскладка)"

#~ msgid "Portuguese"
#~ msgstr "Партугальскі"

#~ msgid "Canadian (Quebec)"
#~ msgstr "Канадскі (Квебэк)"

#~ msgid "Russian (Phonetic)"
#~ msgstr "Рускі (фанетычны)"

#~ msgid "Slovenian"
#~ msgstr "Славенскі"

#~ msgid "Slovakian (QWERTZ)"
#~ msgstr "Славацкі (QWERTZ)"

#~ msgid "Slovakian (QWERTY)"
#~ msgstr "Славацкі (QWERTY)"

#~ msgid "Thai keyboard"
#~ msgstr "Тайская клавіятура"

#~ msgid "Turkish (traditional \"F\" model)"
#~ msgstr "Турэцкі (традыцыёная \"F\" мадэль)"

#~ msgid "Turkish (modern \"Q\" model)"
#~ msgstr "Турэцкі (сучасная \"Q\" мадэль)"

#~ msgid "Ukrainian"
#~ msgstr "Украінскі"

#~ msgid "Vietnamese \"numeric row\" QWERTY"
#~ msgstr "Вьетнамскі \"нумар радка\" QWERTY"

#~ msgid "Enable multiple profiles"
#~ msgstr "Даступна шмат профіляў"

#~ msgid ""
#~ "You may now provide options to module %s.\n"
#~ "Options are in format ``name=value name2=value2...''.\n"
#~ "For instance, ``io=0x300 irq=7''"
#~ msgstr ""
#~ "Вы не можаце задаць опцыі модулю %s.\n"
#~ "Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n"
#~ "Напрыклад, ‟io=0x300 irq=7”"

#~ msgid "Installation of %s failed. The following error occurred:"
#~ msgstr "Усталяванне %s не атрымалася. Узнікла наступная памылка:"

#~ msgid "/dev/hda"
#~ msgstr "/dev/hda"

#~ msgid "/dev/hdb"
#~ msgstr "/dev/hdb"

#~ msgid "/dev/fd0"
#~ msgstr "/dev/fd0"

#~ msgid ""
#~ "Please choose which network adapter you want to use to connect to "
#~ "Internet."
#~ msgstr ""
#~ "Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для "
#~ "далучэння да інтэрнэт"

#~ msgid "chunk size"
#~ msgstr "памер блоку"

#~ msgid "Chunk size %s\n"
#~ msgstr "Памер фрагменту %s\n"

#~ msgid "Can not add a partition to _formatted_ RAID md%d"
#~ msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d"

#~ msgid "mkraid failed (maybe raidtools are missing?)"
#~ msgstr "mkraid не працаздольны (можа raid прылады адсутнічаюць?)"

#~ msgid "mkraid failed"
#~ msgstr "mkraid не працаздольны"

#~ msgid "SILO Installation"
#~ msgstr "Усталяванне SILO"

#~ msgid "First sector of boot partition"
#~ msgstr "Першы сектар загрузачнага раздзелу"

#~ msgid "Bootloader installation"
#~ msgstr "Усталяванне загрузчыку"

#~ msgid "SILO"
#~ msgstr "SILO"

#~ msgid ""
#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
#~ "s.\n"
#~ "Your card is supported by Xorg %s which may have a better support in 2D."
#~ msgstr ""
#~ "Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў Xorg %s.\n"
#~ "Xorg %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты."

#~ msgid ""
#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
#~ "s,\n"
#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
#~ "Your card is supported by Xorg %s which may have a better support in 2D."
#~ msgstr ""
#~ "Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg "
#~ "%s.\n"
#~ "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n"
#~ "ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша відэакарта падтрымліваецца Xorg %s, "
#~ "які\n"
#~ "лепей падтрымлівае карты з 2D-паскарэннем."

#~ msgid "4 billion colors (32 bits)"
#~ msgstr "4 міліярда колераў (24 біты)"

#~ msgid "XFree86 server: %s\n"
#~ msgstr "Сервер XFree86: %s\n"